diff options
| -rw-r--r-- | drivers/i2c/chips/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/i2c/chips/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/chips/atxp1.c | 361 |
3 files changed, 375 insertions, 0 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 74d23cfce2a..a408c137f28 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -62,6 +62,19 @@ config SENSORS_ASB100 This driver can also be built as a module. If so, the module will be called asb100. +config SENSORS_ATXP1 + tristate "Attansic ATXP1 VID controller" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Attansic ATXP1 VID + controller. + + If your board have such a chip, you are able to control your CPU + core and other voltages. + + This driver can also be built as a module. If so, the module + will be called atxp1. + config SENSORS_DS1621 tristate "Dallas Semiconductor DS1621 and DS1625" depends on I2C && EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 65599161a17..6fadd78f9cf 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o +obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_DS1337) += ds1337.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o diff --git a/drivers/i2c/chips/atxp1.c b/drivers/i2c/chips/atxp1.c new file mode 100644 index 00000000000..570b36c6c2a --- /dev/null +++ b/drivers/i2c/chips/atxp1.c @@ -0,0 +1,361 @@ +/* + atxp1.c - kernel module for setting CPU VID and general purpose + I/Os using the Attansic ATXP1 chip. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("System voltages control via Attansic ATXP1"); +MODULE_VERSION("0.6.2"); +MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); + +#define ATXP1_VID 0x00 +#define ATXP1_CVID 0x01 +#define ATXP1_GPIO1 0x06 +#define ATXP1_GPIO2 0x0a +#define ATXP1_VIDENA 0x20 +#define ATXP1_VIDMASK 0x1f +#define ATXP1_GPIO1MASK 0x0f + +static unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +SENSORS_INSMOD_1(atxp1); + +static int atxp1_attach_adapter(struct i2c_adapter * adapter); +static int atxp1_detach_client(struct i2c_client * client); +static struct atxp1_data * atxp1_update_device(struct device *dev); +static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind); + +static struct i2c_driver atxp1_driver = { + .owner = THIS_MODULE, + .name = "atxp1", + .flags = I2C_DF_NOTIFY, + .attach_adapter = atxp1_attach_adapter, + .detach_client = atxp1_detach_client, +}; + +struct atxp1_data { + struct i2c_client client; + struct semaphore update_lock; + unsigned long last_updated; + u8 valid; + struct { + u8 vid; /* VID output register */ + u8 cpu_vid; /* VID input from CPU */ + u8 gpio1; /* General purpose I/O register 1 */ + u8 gpio2; /* General purpose I/O register 2 */ + } reg; + u8 vrm; /* Detected CPU VRM */ +}; + +static struct atxp1_data * atxp1_update_device(struct device *dev) +{ + struct i2c_client *client; + struct atxp1_data *data; + + client = to_i2c_client(dev); + data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if ((jiffies - data->last_updated > HZ) || + (jiffies < data->last_updated) || + !data->valid) { + + /* Update local register data */ + data->reg.vid = i2c_smbus_read_byte_data(client, ATXP1_VID); + data->reg.cpu_vid = i2c_smbus_read_byte_data(client, ATXP1_CVID); + data->reg.gpio1 = i2c_smbus_read_byte_data(client, ATXP1_GPIO1); + data->reg.gpio2 = i2c_smbus_read_byte_data(client, ATXP1_GPIO2); + + data->valid = 1; + } + + up(&data->update_lock); + + return(data); +} + +/* sys file functions for cpu0_vid */ +ssize_t atxp1_showvcore(struct device *dev, char *buf) +{ + int size; + struct atxp1_data *data; + + data = atxp1_update_device(dev); + + size = sprintf(buf, "%d\n", vid_from_reg(data->reg.vid & ATXP1_VIDMASK, data->vrm)); + + return size; +} + +ssize_t atxp1_storevcore(struct device *dev, const char* buf, size_t count) +{ + struct atxp1_data *data; + struct i2c_client *client; + char vid; + char cvid; + unsigned int vcore; + + client = to_i2c_client(dev); + data = atxp1_update_device(dev); + + vcore = simple_strtoul(buf, NULL, 10); + vcore /= 25; + vcore *= 25; + + /* Calculate VID */ + vid = vid_to_reg(vcore, data->vrm); + + if (vid < 0) { + dev_err(dev, "VID calculation failed.\n"); + return -1; + } + + /* If output enabled, use control register value. Otherwise original CPU VID */ + if (data->reg.vid & ATXP1_VIDENA) + cvid = data->reg.vid & ATXP1_VIDMASK; + else + cvid = data->reg.cpu_vid; + + /* Nothing changed, aborting */ + if (vid == cvid) + return count; + + dev_info(dev, "Setting VCore to %d mV (0x%02x)\n", vcore, vid); + + /* Write every 25 mV step to increase stability */ + if (cvid > vid) { + for (; cvid >= vid; cvid--) { + i2c_smbus_write_byte_data(client, ATXP1_VID, cvid | ATXP1_VIDENA); + } + } + else { + for (; cvid <= vid; cvid++) { + i2c_smbus_write_byte_data(client, ATXP1_VID, cvid | ATXP1_VIDENA); + } + } + + data->valid = 0; + + return count; +} + +/* CPU core reference voltage + unit: millivolt +*/ +static DEVICE_ATTR(cpu0_vid, S_IRUGO | S_IWUSR, atxp1_showvcore, atxp1_storevcore); + +/* sys file functions for GPIO1 */ +ssize_t atxp1_showgpio1(struct device *dev, char *buf) +{ + int size; + struct atxp1_data *data; + + data = atxp1_update_device(dev); + + size = sprintf(buf, "0x%02x\n", data->reg.gpio1 & ATXP1_GPIO1MASK); + + return size; +} + +ssize_t atxp1_storegpio1(struct device *dev, const char* buf, size_t count) +{ + struct atxp1_data *data; + struct i2c_client *client; + unsigned int value; + + client = to_i2c_client(dev); + data = atxp1_update_device(dev); + + value = simple_strtoul(buf, NULL, 16); + + value &= ATXP1_GPIO1MASK; + + if (value != (data->reg.gpio1 & ATXP1_GPIO1MASK)) { + dev_info(dev, "Writing 0x%x to GPIO1.\n", value); + + i2c_smbus_write_byte_data(client, ATXP1_GPIO1, value); + + data->valid = 0; + } + + return count; +} + +/* GPIO1 data register + unit: Four bit as hex (e.g. 0x0f) +*/ +static DEVICE_ATTR(gpio1, S_IRUGO | S_IWUSR, atxp1_showgpio1, atxp1_storegpio1); + +/* sys file functions for GPIO2 */ +ssize_t atxp1_showgpio2(struct device *dev, char *buf) +{ + int size; + struct atxp1_data *data; + + data = atxp1_update_device(dev); + + size = sprintf(buf, "0x%02x\n", data->reg.gpio2); + + return size; +} + +ssize_t atxp1_storegpio2(struct device *dev, const char* buf, size_t count) +{ + struct atxp1_data *data; + struct i2c_client *client; + unsigned int value; + + client = to_i2c_client(dev); + data = atxp1_update_device(dev); + + value = simple_strtoul(buf, NULL, 16) & 0xff; + + if (value != data->reg.gpio2) { + dev_info(dev, "Writing 0x%x to GPIO1.\n", value); + + i2c_smbus_write_byte_data(client, ATXP1_GPIO2, value); + + data->valid = 0; + } + + return count; +} + +/* GPIO2 data register + unit: Eight bit as hex (e.g. 0xff) +*/ +static DEVICE_ATTR(gpio2, S_IRUGO | S_IWUSR, atxp1_showgpio2, atxp1_storegpio2); + + +static int atxp1_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_detect(adapter, &addr_data, &atxp1_detect); +}; + +static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client * new_client; + struct atxp1_data * data; + int err = 0; + u8 temp; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct atxp1_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data, 0, sizeof(struct atxp1_data)); + new_client = &data->client; + i2c_set_clientdata(new_client, data); + + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &atxp1_driver; + new_client->flags = 0; + + /* Detect ATXP1, checking if vendor ID registers are all zero */ + if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) && + (i2c_smbus_read_byte_data(new_client, 0x3f) == 0) && + (i2c_smbus_read_byte_data(new_client, 0xfe) == 0) && + (i2c_smbus_read_byte_data(new_client, 0xff) == 0) )) { + + /* No vendor ID, now checking if registers 0x10,0x11 (non-existent) + * showing the same as register 0x00 */ + temp = i2c_smbus_read_byte_data(new_client, 0x00); + + if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) && + (i2c_smbus_read_byte_data(new_client, 0x11) == temp) )) + goto exit_free; + } + + /* Get VRM */ + data->vrm = i2c_which_vrm(); + + if ((data->vrm != 90) && (data->vrm != 91)) { + dev_err(&new_client->dev, "Not supporting VRM %d.%d\n", + data->vrm / 10, data->vrm % 10); + goto exit_free; + } + + strncpy(new_client->name, "atxp1", I2C_NAME_SIZE); + + data->valid = 0; + + init_MUTEX(&data->update_lock); + + err = i2c_attach_client(new_client); + + if (err) + { + dev_err(&new_client->dev, "Attach client error.\n"); + goto exit_free; + } + + device_create_file(&new_client->dev, &dev_attr_gpio1); + device_create_file(&new_client->dev, &dev_attr_gpio2); + device_create_file(&new_client->dev, &dev_attr_cpu0_vid); + + dev_info(&new_client->dev, "Using VRM: %d.%d\n", + data->vrm / 10, data->vrm % 10); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +}; + +static int atxp1_detach_client(struct i2c_client * client) +{ + int err; + + err = i2c_detach_client(client); + + if (err) + dev_err(&client->dev, "Failed to detach client.\n"); + else + kfree(i2c_get_clientdata(client)); + + return err; +}; + +static int __init atxp1_init(void) +{ + return i2c_add_driver(&atxp1_driver); +}; + +static void __exit atxp1_exit(void) +{ + i2c_del_driver(&atxp1_driver); +}; + +module_init(atxp1_init); +module_exit(atxp1_exit); |