diff options
| -rw-r--r-- | arch/mips/au1000/common/pci.c | 8 | ||||
| -rw-r--r-- | arch/mips/pci/ops-au1000.c | 53 |
2 files changed, 32 insertions, 29 deletions
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c index 6fa70a36a25..ce771487567 100644 --- a/arch/mips/au1000/common/pci.c +++ b/arch/mips/au1000/common/pci.c @@ -1,8 +1,8 @@ /* * BRIEF MODULE DESCRIPTION - * Alchemy/AMD Au1x00 pci support. + * Alchemy/AMD Au1x00 PCI support. * - * Copyright 2001,2002,2003 MontaVista Software Inc. + * Copyright 2001-2003, 2007 MontaVista Software Inc. * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com * @@ -66,6 +66,8 @@ static unsigned long virt_io_addr; static int __init au1x_pci_setup(void) { + extern void au1x_pci_cfg_init(void); + #if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START, Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1); @@ -94,6 +96,8 @@ static int __init au1x_pci_setup(void) set_io_port_base(virt_io_addr); #endif + au1x_pci_cfg_init(); + register_pci_controller(&au1x_controller); return 0; } diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c index 6b29904acf4..1314bd58f03 100644 --- a/arch/mips/pci/ops-au1000.c +++ b/arch/mips/pci/ops-au1000.c @@ -1,8 +1,8 @@ /* * BRIEF MODULE DESCRIPTION - * Alchemy/AMD Au1x00 pci support. + * Alchemy/AMD Au1x00 PCI support. * - * Copyright 2001,2002,2003 MontaVista Software Inc. + * Copyright 2001-2003, 2007 MontaVista Software Inc. * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com * @@ -69,10 +69,27 @@ void mod_wired_entry(int entry, unsigned long entrylo0, write_c0_pagemask(old_pagemask); } -struct vm_struct *pci_cfg_vm; +static struct vm_struct *pci_cfg_vm; static int pci_cfg_wired_entry; -static int first_cfg = 1; -unsigned long last_entryLo0, last_entryLo1; +static unsigned long last_entryLo0, last_entryLo1; + +/* + * We can't ioremap the entire pci config space because it's too large. + * Nor can we call ioremap dynamically because some device drivers use + * the PCI config routines from within interrupt handlers and that + * becomes a problem in get_vm_area(). We use one wired TLB to handle + * all config accesses for all busses. + */ +void __init au1x_pci_cfg_init(void) +{ + /* Reserve a wired entry for PCI config accesses */ + pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); + if (!pci_cfg_vm) + panic(KERN_ERR "PCI unable to get vm area\n"); + pci_cfg_wired_entry = read_c0_wired(); + add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K); + last_entryLo0 = last_entryLo1 = 0xffffffff; +} static int config_access(unsigned char access_type, struct pci_bus *bus, unsigned int dev_fn, unsigned char where, @@ -97,27 +114,6 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, Au1500_PCI_STATCMD); au_sync_udelay(1); - /* - * We can't ioremap the entire pci config space because it's - * too large. Nor can we call ioremap dynamically because some - * device drivers use the pci config routines from within - * interrupt handlers and that becomes a problem in get_vm_area(). - * We use one wired tlb to handle all config accesses for all - * busses. To improve performance, if the current device - * is the same as the last device accessed, we don't touch the - * tlb. - */ - if (first_cfg) { - /* reserve a wired entry for pci config accesses */ - first_cfg = 0; - pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); - if (!pci_cfg_vm) - panic(KERN_ERR "PCI unable to get vm area\n"); - pci_cfg_wired_entry = read_c0_wired(); - add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K); - last_entryLo0 = last_entryLo1 = 0xffffffff; - } - /* Allow board vendors to implement their own off-chip idsel. * If it doesn't succeed, may as well bail out at this point. */ @@ -144,9 +140,12 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, /* page boundary */ cfg_base = cfg_base & PAGE_MASK; + /* + * To improve performance, if the current device is the same as + * the last device accessed, we don't touch the TLB. + */ entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; - if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) { mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1, (unsigned long)pci_cfg_vm->addr, PM_4K); |