diff options
36 files changed, 386 insertions, 209 deletions
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 8aa2f1902a9..6b86a722a7d 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) /* Configures BT serial port GPIOs */ s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); - s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); - s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); - s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 084d121f368..00174daf152 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = { static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) { - s3c2416_irq_demux(IRQ_S3C2443_UART3, 3); + s3c2416_irq_demux(IRQ_S3C2443_RX3, 3); } #define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) -#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) - +#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) static void s3c2416_irq_uart3_mask(unsigned int irqno) { diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index 0e0d693f397..893424767ce 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = { static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) { - s3c2443_irq_demux(IRQ_S3C2443_UART3, 3); + s3c2443_irq_demux(IRQ_S3C2443_RX3, 3); } #define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) -#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) - +#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) static void s3c2443_irq_uart3_mask(unsigned int irqno) { diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 249c6295647..89f35e02e88 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -45,7 +45,7 @@ #include <video/platform_lcd.h> -#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index f9ef9b5c5f5..4957ab0a0d4 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -46,7 +46,7 @@ #include <video/platform_lcd.h> -#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 0ad7924fe62..5dd1681c069 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/serial_core.h> #include <linux/i2c.h> +#include <linux/sysdev.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index bcd7a5d5340..1fbc45b2a43 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/sysdev.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index d3260542b94..d440e5f456a 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -567,38 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) +static int __fsi_set_rate(struct clk *clk, long rate, int enable) +{ + int ret = 0; + + if (rate <= 0) + return ret; + + if (enable) { + ret = clk_set_rate(clk, rate); + if (0 == ret) + ret = clk_enable(clk); + } else { + clk_disable(clk); + } + + return ret; +} + +static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) +{ + return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable); +} -static int fsi_set_rate(int is_porta, int rate) +static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsia_ick; + struct clk *fsiack; + int ret = -EIO; + + fsia_ick = clk_get(dev, "icka"); + if (IS_ERR(fsia_ick)) + return PTR_ERR(fsia_ick); + + /* + * FSIACK is connected to AK4642, + * and use external clock pin from it. + * it is parent of fsia_ick now. + */ + fsiack = clk_get_parent(fsia_ick); + if (!fsiack) + goto fsia_ick_out; + + /* + * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick + * + ** FIXME ** + * Because the freq_table of external clk (fsiack) are all 0, + * the return value of clk_round_rate became 0. + * So, it use __fsi_set_rate here. + */ + ret = __fsi_set_rate(fsiack, rate, enable); + if (ret < 0) + goto fsiack_out; + + ret = __fsi_set_round_rate(fsia_ick, rate, enable); + if ((ret < 0) && enable) + __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */ + +fsiack_out: + clk_put(fsiack); + +fsia_ick_out: + clk_put(fsia_ick); + + return 0; +} + +static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; struct clk *fdiv_clk = &sh7372_fsidivb_clk; + long fsib_rate = 0; + long fdiv_rate = 0; + int ackmd_bpfmd; int ret; - /* set_rate is not needed if port A */ - if (is_porta) - return 0; - - fsib_clk = clk_get(NULL, "fsib_clk"); - if (IS_ERR(fsib_clk)) - return -EINVAL; - switch (rate) { case 44100: - clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000)); - ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + fsib_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; break; case 48000: - clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000)); - clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000)); - ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + fsib_rate = 85428000; /* around 48kHz x 256 x 7 */ + fdiv_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; break; default: pr_err("unsupported rate in FSI2 port B\n"); - ret = -EINVAL; - break; + return -EINVAL; } + /* FSI B setting */ + fsib_clk = clk_get(dev, "ickb"); + if (IS_ERR(fsib_clk)) + return -EIO; + + ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable); clk_put(fsib_clk); + if (ret < 0) + return ret; + + /* FSI DIV setting */ + ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable); + if (ret < 0) { + /* disable FSI B */ + if (enable) + __fsi_set_round_rate(fsib_clk, fsib_rate, 0); + return ret; + } + + return ackmd_bpfmd; +} + +static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +{ + int ret; + + if (is_porta) + ret = fsi_ak4642_set_rate(dev, rate, enable); + else + ret = fsi_hdmi_set_rate(dev, rate, enable); return ret; } @@ -880,6 +969,11 @@ static int __init hdmi_init_pm_clock(void) goto out; } + ret = clk_enable(&sh7372_pllc2_clk); + if (ret < 0) { + pr_err("Cannot enable pllc2 clock\n"); + goto out; + } pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); @@ -896,23 +990,11 @@ out: device_initcall(hdmi_init_pm_clock); -#define FSIACK_DUMMY_RATE 48000 static int __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; - /* - * FSIACK is connected to AK4642, - * and the rate is depend on playing sound rate. - * So, set dummy rate (= 48k) here - */ - ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE); - if (ret < 0) { - pr_err("Cannot set FSIACK dummy rate: %d\n", ret); - return ret; - } - fsia_ick = clk_get(&fsi_device.dev, "icka"); if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); @@ -921,16 +1003,9 @@ static int __init fsi_init_pm_clock(void) } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); - if (ret < 0) { - pr_err("Cannot set FSI-A parent: %d\n", ret); - goto out; - } - - ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE); if (ret < 0) - pr_err("Cannot set FSI-A rate: %d\n", ret); + pr_err("Cannot set FSI-A parent: %d\n", ret); -out: clk_put(fsia_ick); return ret; diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index b25ce90a346..3aa02606943 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -229,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate) if (idx < 0) return idx; - if (rate == clk->parent->rate) { - pllc2_disable(clk); - return 0; - } + if (rate == clk->parent->rate) + return -EINVAL; value = __raw_readl(PLLC2CR) & ~(0x3f << 24); - if (value & 0x80000000) - pllc2_disable(clk); - __raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR); - if (value & 0x80000000) - return pllc2_enable(clk); - return 0; } @@ -452,10 +444,8 @@ static int fsidiv_enable(struct clk *clk) unsigned long value; value = __raw_readl(clk->mapping->base) >> 16; - if (value < 2) { - fsidiv_disable(clk); - return -ENOENT; - } + if (value < 2) + return -EIO; __raw_writel((value << 16) | 0x3, clk->mapping->base); @@ -466,17 +456,12 @@ static int fsidiv_set_rate(struct clk *clk, unsigned long rate) { int idx; - if (clk->parent->rate == rate) { - fsidiv_disable(clk); - return 0; - } - idx = (clk->parent->rate / rate) & 0xffff; if (idx < 2) - return -ENOENT; + return -EINVAL; __raw_writel(idx << 16, clk->mapping->base); - return fsidiv_enable(clk); + return 0; } static struct clk_ops fsidiv_clk_ops = { @@ -607,8 +592,6 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), - CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]), - CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]), CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), @@ -645,8 +628,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */ + CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ + CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */ diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h index e49c5b6fc4e..1ab332e37d7 100644 --- a/arch/arm/plat-pxa/include/plat/sdhci.h +++ b/arch/arm/plat-pxa/include/plat/sdhci.h @@ -17,6 +17,9 @@ /* Require clock free running */ #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0) +/* Board design supports 8-bit data on SD/SDIO BUS */ +#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) + /* * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI * @max_speed: the maximum speed supported diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 9793544a6ac..704175b0573 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, } else { s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c index db9e9e477ec..72457afd625 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c @@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, } else { s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index 8ea663a438b..c3972b645d1 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, } else { s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); } } diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 56ad4531b41..004be80fd89 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -645,7 +645,7 @@ static int throtl_dispatch_tg(struct throtl_data *td, struct throtl_grp *tg, { unsigned int nr_reads = 0, nr_writes = 0; unsigned int max_nr_reads = throtl_grp_quantum*3/4; - unsigned int max_nr_writes = throtl_grp_quantum - nr_reads; + unsigned int max_nr_writes = throtl_grp_quantum - max_nr_reads; struct bio *bio; /* Try to dispatch 75% READS and 25% WRITES */ diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index a1725e6488d..7888501ad9e 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1341,7 +1341,7 @@ static struct request *set_next_request(void) { struct request_queue *q; int cnt = FD_MAX_UNITS; - struct request *rq; + struct request *rq = NULL; /* Find next queue we can dispatch from */ fdc_queue = fdc_queue + 1; diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 4e4cc6c828c..605a67e40bb 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -1399,7 +1399,7 @@ static struct request *set_next_request(void) { struct request_queue *q; int old_pos = fdc_queue; - struct request *rq; + struct request *rq = NULL; do { q = unit[fdc_queue].disk->queue; diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index a67d0a611a8..f291587d753 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -66,6 +66,7 @@ MODULE_VERSION("3.6.26"); MODULE_LICENSE("GPL"); static DEFINE_MUTEX(cciss_mutex); +static struct proc_dir_entry *proc_cciss; #include "cciss_cmd.h" #include "cciss.h" @@ -363,8 +364,6 @@ static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", #define ENG_GIG_FACTOR (ENG_GIG/512) #define ENGAGE_SCSI "engage scsi" -static struct proc_dir_entry *proc_cciss; - static void cciss_seq_show_header(struct seq_file *seq) { ctlr_info_t *h = seq->private; diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 255035cfc88..4f9e22f2913 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -65,7 +65,7 @@ enum blkif_state { struct blk_shadow { struct blkif_request req; - unsigned long request; + struct request *request; unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST]; }; @@ -136,7 +136,7 @@ static void add_id_to_freelist(struct blkfront_info *info, unsigned long id) { info->shadow[id].req.id = info->shadow_free; - info->shadow[id].request = 0; + info->shadow[id].request = NULL; info->shadow_free = id; } @@ -245,14 +245,11 @@ static int blkif_ioctl(struct block_device *bdev, fmode_t mode, } /* - * blkif_queue_request + * Generate a Xen blkfront IO request from a blk layer request. Reads + * and writes are handled as expected. Since we lack a loose flush + * request, we map flushes into a full ordered barrier. * - * request block io - * - * id: for guest use only. - * operation: BLKIF_OP_{READ,WRITE,PROBE} - * buffer: buffer to read/write into. this should be a - * virtual address in the guest os. + * @req: a request struct */ static int blkif_queue_request(struct request *req) { @@ -281,7 +278,7 @@ static int blkif_queue_request(struct request *req) /* Fill out a communications ring structure. */ ring_req = RING_GET_REQUEST(&info->ring, info->ring.req_prod_pvt); id = get_id_from_freelist(info); - info->shadow[id].request = (unsigned long)req; + info->shadow[id].request = req; ring_req->id = id; ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req); @@ -290,6 +287,18 @@ static int blkif_queue_request(struct request *req) ring_req->operation = rq_data_dir(req) ? BLKIF_OP_WRITE : BLKIF_OP_READ; + if (req->cmd_flags & (REQ_FLUSH | REQ_FUA)) { + /* + * Ideally we could just do an unordered + * flush-to-disk, but all we have is a full write + * barrier at the moment. However, a barrier write is + * a superset of FUA, so we can implement it the same + * way. (It's also a FLUSH+FUA, since it is + * guaranteed ordered WRT previous writes.) + */ + ring_req->operation = BLKIF_OP_WRITE_BARRIER; + } + ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg); BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST); @@ -634,7 +643,7 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) bret = RING_GET_RESPONSE(&info->ring, i); id = bret->id; - req = (struct request *)info->shadow[id].request; + req = info->shadow[id].request; blkif_completion(&info->shadow[id]); @@ -647,6 +656,16 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) printk(KERN_WARNING "blkfront: %s: write barrier op failed\n", info->gd->disk_name); error = -EOPNOTSUPP; + } + if (unlikely(bret->status == BLKIF_RSP_ERROR && + info->shadow[id].req.nr_segments == 0)) { + printk(KERN_WARNING "blkfront: %s: empty write barrier op failed\n", + info->gd->disk_name); + error = -EOPNOTSUPP; + } + if (unlikely(error)) { + if (error == -EOPNOTSUPP) + error = 0; info->feature_flush = 0; xlvbd_flush(info); } @@ -899,7 +918,7 @@ static int blkif_recover(struct blkfront_info *info) /* Stage 3: Find pending requests and requeue them. */ for (i = 0; i < BLK_RING_SIZE; i++) { /* Not in use? */ - if (copy[i].request == 0) + if (!copy[i].request) continue; /* Grab a request slot and copy shadow state into it. */ @@ -916,9 +935,7 @@ static int blkif_recover(struct blkfront_info *info) req->seg[j].gref, info->xbdev->otherend_id, pfn_to_mfn(info->shadow[req->id].frame[j]), - rq_data_dir( - (struct request *) - info->shadow[req->id].request)); + rq_data_dir(info->shadow[req->id].request)); info->shadow[req->id].req = *req; info->ring.req_prod_pvt++; @@ -1067,14 +1084,8 @@ static void blkfront_connect(struct blkfront_info *info) */ info->feature_flush = 0; - /* - * The driver doesn't properly handled empty flushes, so - * lets disable barrier support for now. - */ -#if 0 if (!err && barrier) - info->feature_flush = REQ_FLUSH; -#endif + info->feature_flush = REQ_FLUSH | REQ_FUA; err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size); if (err) { diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 8f86d702e46..31ae07a3657 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1559,7 +1559,7 @@ void mmc_stop_host(struct mmc_host *host) if (host->caps & MMC_CAP_DISABLE) cancel_delayed_work(&host->disable); - cancel_delayed_work(&host->detect); + cancel_delayed_work_sync(&host->detect); mmc_flush_scheduled_work(); /* clear pm flags now and let card drivers set them as needed */ diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 995261f7fd7..77f93c3b880 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -375,7 +375,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, struct mmc_card *oldcard) { struct mmc_card *card; - int err, ddr = MMC_SDR_MODE; + int err, ddr = 0; u32 cid[4]; unsigned int max_dtr; @@ -562,7 +562,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, 1 << bus_width, ddr); err = 0; } else { - mmc_card_set_ddr_mode(card); + if (ddr) + mmc_card_set_ddr_mode(card); + else + ddr = MMC_SDR_MODE; + mmc_set_bus_width_ddr(card->host, bus_width, ddr); } } diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index c3ad1058cd3..efef5f94ac4 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host) BUG_ON(!host->card); /* Make sure card is powered before detecting it */ - err = pm_runtime_get_sync(&host->card->dev); - if (err < 0) - goto out; + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + err = pm_runtime_get_sync(&host->card->dev); + if (err < 0) + goto out; + } mmc_claim_host(host); @@ -560,6 +562,20 @@ static void mmc_sdio_detect(struct mmc_host *host) mmc_release_host(host); + /* + * Tell PM core it's OK to power off the card now. + * + * The _sync variant is used in order to ensure that the card + * is left powered off in case an error occurred, and the card + * is going to be removed. + * + * Since there is no specific reason to believe a new user + * is about to show up at this point, the _sync variant is + * desirable anyway. + */ + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_sync(&host->card->dev); + out: if (err) { mmc_sdio_remove(host); @@ -568,9 +584,6 @@ out: mmc_detach_bus(host); mmc_release_host(host); } - - /* Tell PM core that we're done */ - pm_runtime_put(&host->card->dev); } /* @@ -718,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) card = host->card; /* - * Let runtime PM core know our card is active + * Enable runtime PM only if supported by host+card+board */ - err = pm_runtime_set_active(&card->dev); - if (err) - goto remove; + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + /* + * Let runtime PM core know our card is active + */ + err = pm_runtime_set_active(&card->dev); + if (err) + goto remove; - /* - * Enable runtime PM for this card - */ - pm_runtime_enable(&card->dev); + /* + * Enable runtime PM for this card + */ + pm_runtime_enable(&card->dev); + } /* * The number of functions on the card is encoded inside @@ -745,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) goto remove; /* - * Enable Runtime PM for this func + * Enable Runtime PM for this func (if supported) */ - pm_runtime_enable(&card->sdio_func[i]->dev); + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_enable(&card->sdio_func[i]->dev); } mmc_release_host(host); diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 2716c7ab6bb..203da443e33 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -17,6 +17,7 @@ #include <linux/pm_runtime.h> #include <linux/mmc/card.h> +#include <linux/mmc/host.h> #include <linux/mmc/sdio_func.h> #include "sdio_cis.h" @@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev) * it should call pm_runtime_put_noidle() in its probe routine and * pm_runtime_get_noresume() in its remove routine. */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto out; + } /* Set the default block size so the driver is sure it's something * sensible. */ @@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev) return 0; disable_runtimepm: - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); out: return ret; } @@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev) { struct sdio_driver *drv = to_sdio_driver(dev->driver); struct sdio_func *func = dev_to_sdio_func(dev); - int ret; + int ret = 0; /* Make sure card is powered before invoking ->remove() */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto out; + } drv->remove(func); @@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev) } /* First, undo the increment made directly above */ - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); /* Then undo the runtime PM settings in sdio_bus_probe() */ - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); out: return ret; @@ -191,6 +199,8 @@ out: static int sdio_bus_pm_prepare(struct device *dev) { + struct sdio_func *func = dev_to_sdio_func(dev); + /* * Resume an SDIO device which was suspended at run time at this * point, in order to allow standard SDIO suspend/resume paths @@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev) * since there is little point in failing system suspend if a * device can't be resumed. */ - pm_runtime_resume(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_resume(dev); return 0; } diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 82a1079bbdc..5d46021cbb5 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1002,7 +1002,7 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host, * Monitor a 0->1 transition first */ if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) { - while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit)) + while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit)) && (i++ < limit)) cpu_relax(); } diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 2e9cca19c90..9b82910b9db 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -17,6 +17,7 @@ #include <linux/clk.h> #include <linux/mmc/host.h> #include <linux/mmc/sdhci-pltfm.h> +#include <mach/hardware.h> #include "sdhci.h" #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" @@ -112,6 +113,13 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd clk_enable(clk); pltfm_host->clk = clk; + if (cpu_is_mx35() || cpu_is_mx51()) + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + + /* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */ + if (cpu_is_mx25() || cpu_is_mx35()) + host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK; + return 0; } @@ -133,10 +141,8 @@ static struct sdhci_ops sdhci_esdhc_ops = { }; struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { - .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK - | SDHCI_QUIRK_BROKEN_ADMA, + .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA, /* ADMA has issues. Might be fixable */ - /* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */ .ops = &sdhci_esdhc_ops, .init = esdhc_pltfm_init, .exit = esdhc_pltfm_exit, diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 55746bac2f4..3d9c2460d43 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -149,11 +149,11 @@ static const struct sdhci_pci_fixes sdhci_cafe = { * ADMA operation is disabled for Moorestown platform due to * hardware bugs. */ -static int mrst_hc1_probe(struct sdhci_pci_chip *chip) +static int mrst_hc_probe(struct sdhci_pci_chip *chip) { /* - * slots number is fixed here for MRST as SDIO3 is never used and has - * hardware bugs. + * slots number is fixed here for MRST as SDIO3/5 are never used and + * have hardware bugs. */ chip->num_slots = 1; return 0; @@ -163,9 +163,9 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = { .quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT, }; -static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = { +static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = { .quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT, - .probe = mrst_hc1_probe, + .probe = mrst_hc_probe, }; static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = { @@ -538,7 +538,15 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_INTEL_MRST_SD1, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1, + .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_MRST_SD2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2, }, { @@ -637,6 +645,7 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) { struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; + mmc_pm_flag_t slot_pm_flags; mmc_pm_flag_t pm_flags = 0; int i, ret; @@ -657,7 +666,11 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) return ret; } - pm_flags |= slot->host->mmc->pm_flags; + slot_pm_flags = slot->host->mmc->pm_flags; + if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ) + sdhci_enable_irq_wakeups(slot->host); + + pm_flags |= slot_pm_flags; } if (chip->fixes && chip->fixes->suspend) { @@ -671,8 +684,10 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) pci_save_state(pdev); if (pm_flags & MMC_PM_KEEP_POWER) { - if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) + if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) { + pci_pme_active(pdev, true); pci_enable_wake(pdev, PCI_D3hot, 1); + } pci_set_power_state(pdev, PCI_D3hot); } else { pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c index fc406ac5d19..5a61208cbc6 100644 --- a/drivers/mmc/host/sdhci-pxa.c +++ b/drivers/mmc/host/sdhci-pxa.c @@ -141,6 +141,10 @@ static int __devinit sdhci_pxa_probe(struct platform_device *pdev) if (pdata->quirks) host->quirks |= pdata->quirks; + /* If slot design supports 8 bit data, indicate this to MMC. */ + if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + ret = sdhci_add_host(host); if (ret) { dev_err(&pdev->dev, "failed to add host\n"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 782c0ee3c92..a25db426c91 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1185,17 +1185,31 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->ops->platform_send_init_74_clocks) host->ops->platform_send_init_74_clocks(host, ios->power_mode); - ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); - - if (ios->bus_width == MMC_BUS_WIDTH_8) - ctrl |= SDHCI_CTRL_8BITBUS; - else - ctrl &= ~SDHCI_CTRL_8BITBUS; + /* + * If your platform has 8-bit width support but is not a v3 controller, + * or if it requires special setup code, you should implement that in + * platform_8bit_width(). + */ + if (host->ops->platform_8bit_width) + host->ops->platform_8bit_width(host, ios->bus_width); + else { + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + if (ios->bus_width == MMC_BUS_WIDTH_8) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + if (host->version >= SDHCI_SPEC_300) + ctrl |= SDHCI_CTRL_8BITBUS; + } else { + if (host->version >= SDHCI_SPEC_300) + ctrl &= ~SDHCI_CTRL_8BITBUS; + if (ios->bus_width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + } - if (ios->bus_width == MMC_BUS_WIDTH_4) - ctrl |= SDHCI_CTRL_4BITBUS; - else - ctrl &= ~SDHCI_CTRL_4BITBUS; + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); if ((ios->timing == MMC_TIMING_SD_HS || ios->timing == MMC_TIMING_MMC_HS) @@ -1681,6 +1695,16 @@ int sdhci_resume_host(struct sdhci_host *host) EXPORT_SYMBOL_GPL(sdhci_resume_host); +void sdhci_enable_irq_wakeups(struct sdhci_host *host) +{ + u8 val; + val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL); + val |= SDHCI_WAKE_ON_INT; + sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL); +} + +EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups); + #endif /* CONFIG_PM */ /*****************************************************************************\ @@ -1845,11 +1869,19 @@ int sdhci_add_host(struct sdhci_host *host) mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; else mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200; + mmc->f_max = host->max_clk; mmc->caps |= MMC_CAP_SDIO_IRQ; + /* + * A controller may support 8-bit width, but the board itself + * might not have the pins brought out. Boards that support + * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in + * their platform code before calling sdhci_add_host(), and we + * won't assume 8-bit width for hosts without that CAP. + */ if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) - mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; + mmc->caps |= MMC_CAP_4_BIT_DATA; if (caps & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index b7b8a3b28b0..e42d7f00c06 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -76,7 +76,7 @@ #define SDHCI_CTRL_ADMA1 0x08 #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 -#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_8BITBUS 0x20 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -87,6 +87,9 @@ #define SDHCI_BLOCK_GAP_CONTROL 0x2A #define SDHCI_WAKE_UP_CONTROL 0x2B +#define SDHCI_WAKE_ON_INT 0x01 +#define SDHCI_WAKE_ON_INSERT 0x02 +#define SDHCI_WAKE_ON_REMOVE 0x04 #define SDHCI_CLOCK_CONTROL 0x2C #define SDHCI_DIVIDER_SHIFT 8 @@ -152,6 +155,7 @@ #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_8BIT 0x00040000 #define SDHCI_CAN_DO_ADMA2 0x00080000 #define SDHCI_CAN_DO_ADMA1 0x00100000 #define SDHCI_CAN_DO_HISPD 0x00200000 @@ -212,6 +216,8 @@ struct sdhci_ops { unsigned int (*get_max_clock)(struct sdhci_host *host); unsigned int (*get_min_clock)(struct sdhci_host *host); unsigned int (*get_timeout_clock)(struct sdhci_host *host); + int (*platform_8bit_width)(struct sdhci_host *host, + int width); void (*platform_send_init_74_clocks)(struct sdhci_host *host, u8 power_mode); unsigned int (*get_ro)(struct sdhci_host *host); @@ -317,6 +323,7 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead); #ifdef CONFIG_PM extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); extern int sdhci_resume_host(struct sdhci_host *host); +extern void sdhci_enable_irq_wakeups(struct sdhci_host *host); #endif #endif /* __SDHCI_HW_H */ diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c index b4ead4a13c9..f8f65df9b01 100644 --- a/drivers/mmc/host/ushc.c +++ b/drivers/mmc/host/ushc.c @@ -425,7 +425,7 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id struct usb_device *usb_dev = interface_to_usbdev(intf); struct mmc_host *mmc; struct ushc_data *ushc; - int ret = -ENOMEM; + int ret; mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev); if (mmc == NULL) @@ -462,11 +462,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id mmc->max_blk_count = 511; ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->int_urb == NULL) + if (ushc->int_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL); - if (ushc->int_data == NULL) + if (ushc->int_data == NULL) { + ret = -ENOMEM; goto err; + } usb_fill_int_urb(ushc->int_urb, ushc->usb_dev, usb_rcvintpipe(usb_dev, intf->cur_altsetting->endpoint[0].desc.bEndpointAddress), @@ -475,11 +479,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id intf->cur_altsetting->endpoint[0].desc.bInterval); ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->cbw_urb == NULL) + if (ushc->cbw_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL); - if (ushc->cbw == NULL) + if (ushc->cbw == NULL) { + ret = -ENOMEM; goto err; + } ushc->cbw->signature = USHC_CBW_SIGNATURE; usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2), @@ -487,15 +495,21 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id cbw_callback, ushc); ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->data_urb == NULL) + if (ushc->data_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->csw_urb == NULL) + if (ushc->csw_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL); - if (ushc->csw == NULL) + if (ushc->csw == NULL) { + ret = -ENOMEM; goto err; + } usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6), ushc->csw, sizeof(struct ushc_csw), csw_callback, ushc); diff --git a/fs/ioprio.c b/fs/ioprio.c index 2f7d05c8992..7da2a06508e 100644 --- a/fs/ioprio.c +++ b/fs/ioprio.c @@ -103,22 +103,15 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio) } ret = -ESRCH; - /* - * We want IOPRIO_WHO_PGRP/IOPRIO_WHO_USER to be "atomic", - * so we can't use rcu_read_lock(). See re-copy of ->ioprio - * in copy_process(). - */ - read_lock(&tasklist_lock); + rcu_read_lock(); switch (which) { case IOPRIO_WHO_PROCESS: - rcu_read_lock(); if (!who) p = current; else p = find_task_by_vpid(who); if (p) ret = set_task_ioprio(p, ioprio); - rcu_read_unlock(); break; case IOPRIO_WHO_PGRP: if (!who) @@ -141,12 +134,7 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio) break; do_each_thread(g, p) { - int match; - - rcu_read_lock(); - match = __task_cred(p)->uid == who; - rcu_read_unlock(); - if (!match) + if (__task_cred(p)->uid != who) continue; ret = set_task_ioprio(p, ioprio); if (ret) @@ -160,7 +148,7 @@ free_uid: ret = -EINVAL; } - read_unlock(&tasklist_lock); + rcu_read_unlock(); return ret; } @@ -204,17 +192,15 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who) int ret = -ESRCH; int tmpio; - read_lock(&tasklist_lock); + rcu_read_lock(); switch (which) { case IOPRIO_WHO_PROCESS: - rcu_read_lock(); if (!who) p = current; else p = find_task_by_vpid(who); if (p) ret = get_task_ioprio(p); - rcu_read_unlock(); break; case IOPRIO_WHO_PGRP: if (!who) @@ -241,12 +227,7 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who) break; do_each_thread(g, p) { - int match; - - rcu_read_lock(); - match = __task_cred(p)->uid == user->uid; - rcu_read_unlock(); - if (!match) + if (__task_cred(p)->uid != user->uid) continue; tmpio = get_task_ioprio(p); if (tmpio < 0) @@ -264,6 +245,6 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who) ret = -EINVAL; } - read_unlock(&tasklist_lock); + rcu_read_unlock(); return ret; } diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c index 49c844dab33..59e5fe742f7 100644 --- a/fs/nilfs2/dat.c +++ b/fs/nilfs2/dat.c @@ -335,7 +335,7 @@ int nilfs_dat_move(struct inode *dat, __u64 vblocknr, sector_t blocknr) * the device at this point. * * To prevent nilfs_dat_translate() from returning the - * uncommited block number, this makes a copy of the entry + * uncommitted block number, this makes a copy of the entry * buffer and redirects nilfs_dat_translate() to the copy. */ if (!buffer_nilfs_redirected(entry_bh)) { diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 3e90f86d5bf..e00d9457c25 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -349,8 +349,8 @@ static int nilfs_ioctl_move_blocks(struct super_block *sb, ino = vdesc->vd_ino; cno = vdesc->vd_cno; inode = nilfs_iget_for_gc(sb, ino, cno); - if (unlikely(inode == NULL)) { - ret = -ENOMEM; + if (IS_ERR(inode)) { + ret = PTR_ERR(inode); goto failed; } do { diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 6d87f68ce4b..30f6fad99a5 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -168,6 +168,7 @@ struct mmc_host { /* DDR mode at 1.8V */ #define MMC_CAP_1_2V_DDR (1 << 12) /* can support */ /* DDR mode at 1.2V */ +#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */ mmc_pm_flag_t pm_caps; /* supported pm features */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index c6bcfe93b9c..d369b533dc2 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2441,6 +2441,7 @@ #define PCI_DEVICE_ID_INTEL_MFD_SDIO2 0x0822 #define PCI_DEVICE_ID_INTEL_MFD_EMMC0 0x0823 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1 0x0824 +#define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F #define PCI_DEVICE_ID_INTEL_I960 0x0960 #define PCI_DEVICE_ID_INTEL_I960RM 0x0962 #define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062 diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h index fa60cbda90a..d79894192ae 100644 --- a/include/sound/sh_fsi.h +++ b/include/sound/sh_fsi.h @@ -85,7 +85,9 @@ * ACK_MD (FSI2) * CKG1 (FSI) * - * err: return value < 0 + * err : return value < 0 + * no change : return value == 0 + * change xMD : return value > 0 * * 0x-00000AB * @@ -111,7 +113,7 @@ struct sh_fsi_platform_info { unsigned long porta_flags; unsigned long portb_flags; - int (*set_rate)(int is_porta, int rate); /* for master mode */ + int (*set_rate)(struct device *dev, int is_porta, int rate, int enable); }; #endif /* __SOUND_FSI_H */ diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 507e709f280..4c2404b1b86 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -132,6 +132,8 @@ struct fsi_priv { struct fsi_stream playback; struct fsi_stream capture; + long rate; + u32 mst_ctrl; }; @@ -854,10 +856,17 @@ static void fsi_dai_shutdown(struct snd_pcm_substream *substream, { struct fsi_priv *fsi = fsi_get_priv(substream); int is_play = fsi_is_play(substream); + struct fsi_master *master = fsi_get_master(fsi); + int (*set_rate)(struct device *dev, int is_porta, int rate, int enable); fsi_irq_disable(fsi, is_play); fsi_clk_ctrl(fsi, 0); + set_rate = master->info->set_rate; + if (set_rate && fsi->rate) + set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0); + fsi->rate = 0; + pm_runtime_put_sync(dai->dev); } @@ -891,20 +900,20 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream, { struct fsi_priv *fsi = fsi_get_priv(substream); struct fsi_master *master = fsi_get_master(fsi); - int (*set_rate)(int is_porta, int rate) = master->info->set_rate; + int (*set_rate)(struct device *dev, int is_porta, int rate, int enable); int fsi_ver = master->core->ver; - int is_play = fsi_is_play(substream); + long rate = params_rate(params); int ret; - /* if slave mode, set_rate is not needed */ - if (!fsi_is_master_mode(fsi, is_play)) + set_rate = master->info->set_rate; + if (!set_rate) return 0; - /* it is error if no set_rate */ - if (!set_rate) - return -EIO; + ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1); + if (ret < 0) /* error */ + return ret; - ret = set_rate(fsi_is_port_a(fsi), params_rate(params)); + fsi->rate = rate; if (ret > 0) { u32 data = 0; |