summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/thinkpad-acpi.txt353
-rw-r--r--drivers/misc/Kconfig14
-rw-r--r--drivers/misc/thinkpad_acpi.c602
-rw-r--r--drivers/misc/thinkpad_acpi.h42
-rw-r--r--include/linux/pci_ids.h2
5 files changed, 854 insertions, 159 deletions
diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt
index 9e6b94face4..6711fbcf408 100644
--- a/Documentation/thinkpad-acpi.txt
+++ b/Documentation/thinkpad-acpi.txt
@@ -1,11 +1,11 @@
ThinkPad ACPI Extras Driver
- Version 0.14
- April 21st, 2007
+ Version 0.15
+ July 1st, 2007
Borislav Deianov <borislav@users.sf.net>
- Henrique de Moraes Holschuh <hmh@hmh.eng.br>
- http://ibm-acpi.sf.net/
+ Henrique de Moraes Holschuh <hmh@hmh.eng.br>
+ http://ibm-acpi.sf.net/
This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It
@@ -134,54 +134,68 @@ end of this document. Changes to the sysfs interface done by the kernel
subsystems are not documented here, nor are they tracked by this
attribute.
+Changes to the thinkpad-acpi sysfs interface are only considered
+non-experimental when they are submitted to Linux mainline, at which
+point the changes in this interface are documented and interface_version
+may be updated. If you are using any thinkpad-acpi features not yet
+sent to mainline for merging, you do so on your own risk: these features
+may disappear, or be implemented in a different and incompatible way by
+the time they are merged in Linux mainline.
+
+Changes that are backwards-compatible by nature (e.g. the addition of
+attributes that do not change the way the other attributes work) do not
+always warrant an update of interface_version. Therefore, one must
+expect that an attribute might not be there, and deal with it properly
+(an attribute not being there *is* a valid way to make it clear that a
+feature is not available in sysfs).
+
Hot keys
--------
procfs: /proc/acpi/ibm/hotkey
sysfs device attribute: hotkey_*
-Without this driver, only the Fn-F4 key (sleep button) generates an
-ACPI event. With the driver loaded, the hotkey feature enabled and the
-mask set (see below), the various hot keys generate ACPI events in the
+In a ThinkPad, the ACPI HKEY handler is responsible for comunicating
+some important events and also keyboard hot key presses to the operating
+system. Enabling the hotkey functionality of thinkpad-acpi signals the
+firmware that such a driver is present, and modifies how the ThinkPad
+firmware will behave in many situations.
+
+When the hotkey feature is enabled and the hot key mask is set (see
+below), the various hot keys either generate ACPI events in the
following format:
ibm/hotkey HKEY 00000080 0000xxxx
-The last four digits vary depending on the key combination pressed.
-All labeled Fn-Fx key combinations generate distinct events. In
-addition, the lid microswitch and some docking station buttons may
-also generate such events.
-
-The bit mask allows some control over which hot keys generate ACPI
-events. Not all bits in the mask can be modified. Not all bits that
-can be modified do anything. Not all hot keys can be individually
-controlled by the mask. Most recent ThinkPad models honor the
-following bits (assuming the hot keys feature has been enabled):
-
- key bit behavior when set behavior when unset
-
- Fn-F3 always generates ACPI event
- Fn-F4 always generates ACPI event
- Fn-F5 0010 generate ACPI event enable/disable Bluetooth
- Fn-F7 0040 generate ACPI event switch LCD and external display
- Fn-F8 0080 generate ACPI event expand screen or none
- Fn-F9 0100 generate ACPI event none
- Fn-F12 always generates ACPI event
-
-Some models do not support all of the above. For example, the T30 does
-not support Fn-F5 and Fn-F9. Other models do not support the mask at
-all. On those models, hot keys cannot be controlled individually.
-
-Note that enabling ACPI events for some keys prevents their default
-behavior. For example, if events for Fn-F5 are enabled, that key will
-no longer enable/disable Bluetooth by itself. This can still be done
-from an acpid handler for the ibm/hotkey event.
-
-Note also that not all Fn key combinations are supported through
-ACPI. For example, on the X40, the brightness, volume and "Access IBM"
-buttons do not generate ACPI events even with this driver. They *can*
-be used through the "ThinkPad Buttons" utility, see
-http://www.nongnu.org/tpb/
+or events over the input layer. The input layer support accepts the
+standard IOCTLs to remap the keycodes assigned to each hotkey.
+
+When the input device is open, the driver will suppress any ACPI hot key
+events that get translated into a meaningful input layer event, in order
+to avoid sending duplicate events to userspace. Hot keys that are
+mapped to KEY_RESERVED in the keymap are not translated, and will always
+generate an ACPI ibm/hotkey HKEY event, and no input layer events.
+
+The hot key bit mask allows some control over which hot keys generate
+events. If a key is "masked" (bit set to 0 in the mask), the firmware
+will handle it. If it is "unmasked", it signals the firmware that
+thinkpad-acpi would prefer to handle it, if the firmware would be so
+kind to allow it (and it often doesn't!).
+
+Not all bits in the mask can be modified. Not all bits that can be
+modified do anything. Not all hot keys can be individually controlled
+by the mask. Some models do not support the mask at all, and in those
+models, hot keys cannot be controlled individually. The behaviour of
+the mask is, therefore, higly dependent on the ThinkPad model.
+
+Note that unmasking some keys prevents their default behavior. For
+example, if Fn+F5 is unmasked, that key will no longer enable/disable
+Bluetooth by itself.
+
+Note also that not all Fn key combinations are supported through ACPI.
+For example, on the X40, the brightness, volume and "Access IBM" buttons
+do not generate ACPI events even with this driver. They *can* be used
+through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/
procfs notes:
@@ -189,9 +203,9 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file:
echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
- echo 0xffff > /proc/acpi/ibm/hotkey -- enable all possible hot keys
- echo 0x0000 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
- ... any other 4-hex-digit mask ...
+ echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
+ echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
+ ... any other 8-hex-digit mask ...
echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
sysfs notes:
@@ -202,7 +216,7 @@ sysfs notes:
key feature status will be restored to this value.
0: hot keys were disabled
- 1: hot keys were enabled
+ 1: hot keys were enabled (unusual)
hotkey_bios_mask:
Returns the hot keys mask when thinkpad-acpi was loaded.
@@ -217,9 +231,182 @@ sysfs notes:
1: enables the hot keys feature / feature enabled
hotkey_mask:
- bit mask to enable ACPI event generation for each hot
- key (see above). Returns the current status of the hot
- keys mask, and allows one to modify it.
+ bit mask to enable driver-handling and ACPI event
+ generation for each hot key (see above). Returns the
+ current status of the hot keys mask, and allows one to
+ modify it.
+
+ hotkey_all_mask:
+ bit mask that should enable event reporting for all
+ supported hot keys, when echoed to hotkey_mask above.
+ Unless you know which events need to be handled
+ passively (because the firmware *will* handle them
+ anyway), do *not* use hotkey_all_mask. Use
+ hotkey_recommended_mask, instead. You have been warned.
+
+ hotkey_recommended_mask:
+ bit mask that should enable event reporting for all
+ supported hot keys, except those which are always
+ handled by the firmware anyway. Echo it to
+ hotkey_mask above, to use.
+
+ hotkey_radio_sw:
+ if the ThinkPad has a hardware radio switch, this
+ attribute will read 0 if the switch is in the "radios
+ disabled" postition, and 1 if the switch is in the
+ "radios enabled" position.
+
+input layer notes:
+
+A Hot key is mapped to a single input layer EV_KEY event, possibly
+followed by an EV_MSC MSC_SCAN event that shall contain that key's scan
+code. An EV_SYN event will always be generated to mark the end of the
+event block.
+
+Do not use the EV_MSC MSC_SCAN events to process keys. They are to be
+used as a helper to remap keys, only. They are particularly useful when
+remapping KEY_UNKNOWN keys.
+
+The events are available in an input device, with the following id:
+
+ Bus: BUS_HOST
+ vendor: 0x1014 (PCI_VENDOR_ID_IBM) or
+ 0x17aa (PCI_VENDOR_ID_LENOVO)
+ product: 0x5054 ("TP")
+ version: 0x4101
+
+The version will have its LSB incremented if the keymap changes in a
+backwards-compatible way. The MSB shall always be 0x41 for this input
+device. If the MSB is not 0x41, do not use the device as described in
+this section, as it is either something else (e.g. another input device
+exported by a thinkpad driver, such as HDAPS) or its functionality has
+been changed in a non-backwards compatible way.
+
+Adding other event types for other functionalities shall be considered a
+backwards-compatible change for this input device.
+
+Thinkpad-acpi Hot Key event map (version 0x4101):
+
+ACPI Scan
+event code Key Notes
+
+0x1001 0x00 FN+F1 -
+0x1002 0x01 FN+F2 IBM: battery (rare)
+ Lenovo: Screen lock
+
+0x1003 0x02 FN+F3 Many IBM models always report
+ this hot key, even with hot keys
+ disabled or with Fn+F3 masked
+ off
+ IBM: screen lock
+ Lenovo: battery
+
+0x1004 0x03 FN+F4 Sleep button (ACPI sleep button
+ semanthics, i.e. sleep-to-RAM).
+ It is always generate some kind
+ of event, either the hot key
+ event or a ACPI sleep button
+ event. The firmware may
+ refuse to generate further FN+F4
+ key presses until a S3 or S4 ACPI
+ sleep cycle is performed or some
+ time passes.
+
+0x1005 0x04 FN+F5 Radio. Enables/disables
+ the internal BlueTooth hardware
+ and W-WAN card if left in control
+ of the firmware. Does not affect
+ the WLAN card.
+ Should be used to turn on/off all
+ radios (bluetooth+W-WAN+WLAN),
+ really.
+
+0x1006 0x05 FN+F6 -
+
+0x1007 0x06 FN+F7 Video output cycle.
+ Do you feel lucky today?
+
+0x1008 0x07 FN+F8 IBM: toggle screen expand
+ Lenovo: configure ultranav
+
+0x1009 0x08 FN+F9 -
+ .. .. ..
+0x100B 0x0A FN+F11 -
+
+0x100C 0x0B FN+F12 Sleep to disk. You are always
+ supposed to handle it yourself,
+ either through the ACPI event,
+ or through a hotkey event.
+ The firmware may refuse to
+ generate further FN+F4 key
+ press events until a S3 or S4
+ ACPI sleep cycle is performed,
+ or some time passes.
+
+0x100D 0x0C FN+BACKSPACE -
+0x100E 0x0D FN+INSERT -
+0x100F 0x0E FN+DELETE -
+
+0x1010 0x0F FN+HOME Brightness up. This key is
+ always handled by the firmware
+ in IBM ThinkPads, even when
+ unmasked. Just leave it alone.
+ For Lenovo ThinkPads with a new
+ BIOS, it has to be handled either
+ by the ACPI OSI, or by userspace.
+0x1011 0x10 FN+END Brightness down. See brightness
+ up for details.
+
+0x1012 0x11 FN+PGUP Thinklight toggle. This key is
+ always handled by the firmware,
+ even when unmasked.
+
+0x1013 0x12 FN+PGDOWN -
+
+0x1014 0x13 FN+SPACE Zoom key
+
+0x1015 0x14 VOLUME UP Internal mixer volume up. This
+ key is always handled by the
+ firmware, even when unmasked.
+ NOTE: Lenovo seems to be changing
+ this.
+0x1016 0x15 VOLUME DOWN Internal mixer volume up. This
+ key is always handled by the
+ firmware, even when unmasked.
+ NOTE: Lenovo seems to be changing
+ this.
+0x1017 0x16 MUTE Mute internal mixer. This
+ key is always handled by the
+ firmware, even when unmasked.
+
+0x1018 0x17 THINKPAD Thinkpad/Access IBM/Lenovo key
+
+0x1019 0x18 unknown
+.. .. ..
+0x1020 0x1F unknown
+
+The ThinkPad firmware does not allow one to differentiate when most hot
+keys are pressed or released (either that, or we don't know how to, yet).
+For these keys, the driver generates a set of events for a key press and
+immediately issues the same set of events for a key release. It is
+unknown by the driver if the ThinkPad firmware triggered these events on
+hot key press or release, but the firmware will do it for either one, not
+both.
+
+If a key is mapped to KEY_RESERVED, it generates no input events at all,
+and it may generate a legacy thinkpad-acpi ACPI hotkey event.
+
+If a key is mapped to KEY_UNKNOWN, it generates an input event that
+includes an scan code, and it may also generate a legacy thinkpad-acpi
+ACPI hotkey event.
+
+If a key is mapped to anything else, it will only generate legacy
+thinkpad-acpi ACPI hotkey events if nobody has opened the input device.
+
+Non hot-key ACPI HKEY event map:
+0x5001 Lid closed
+0x5002 Lid opened
+0x7000 Radio Switch may have changed state
Bluetooth
@@ -437,27 +624,34 @@ CMOS control
procfs: /proc/acpi/ibm/cmos
sysfs device attribute: cmos_command
-This feature is used internally by the ACPI firmware to control the
-ThinkLight on most newer ThinkPad models. It may also control LCD
-brightness, sounds volume and more, but only on some models.
+This feature is mostly used internally by the ACPI firmware to keep the legacy
+CMOS NVRAM bits in sync with the current machine state, and to record this
+state so that the ThinkPad will retain such settings across reboots.
+
+Some of these commands actually perform actions in some ThinkPad models, but
+this is expected to disappear more and more in newer models. As an example, in
+a T43 and in a X40, commands 12 and 13 still control the ThinkLight state for
+real, but commands 0 to 2 don't control the mixer anymore (they have been
+phased out) and just update the NVRAM.
The range of valid cmos command numbers is 0 to 21, but not all have an
effect and the behavior varies from model to model. Here is the behavior
on the X40 (tpb is the ThinkPad Buttons utility):
- 0 - no effect but tpb reports "Volume down"
- 1 - no effect but tpb reports "Volume up"
- 2 - no effect but tpb reports "Mute on"
- 3 - simulate pressing the "Access IBM" button
- 4 - LCD brightness up
- 5 - LCD brightness down
- 11 - toggle screen expansion
- 12 - ThinkLight on
- 13 - ThinkLight off
- 14 - no effect but tpb reports ThinkLight status change
+ 0 - Related to "Volume down" key press
+ 1 - Related to "Volume up" key press
+ 2 - Related to "Mute on" key press
+ 3 - Related to "Access IBM" key press
+ 4 - Related to "LCD brightness up" key pess
+ 5 - Related to "LCD brightness down" key press
+ 11 - Related to "toggle screen expansion" key press/function
+ 12 - Related to "ThinkLight on"
+ 13 - Related to "ThinkLight off"
+ 14 - Related to "ThinkLight" key press (toggle thinklight)
The cmos command interface is prone to firmware split-brain problems, as
-in newer ThinkPads it is just a compatibility layer.
+in newer ThinkPads it is just a compatibility layer. Do not use it, it is
+exported just as a debug tool.
LED control -- /proc/acpi/ibm/led
---------------------------------
@@ -516,23 +710,15 @@ Temperature sensors
procfs: /proc/acpi/ibm/thermal
sysfs device attributes: (hwmon) temp*_input
-Most ThinkPads include six or more separate temperature sensors but
-only expose the CPU temperature through the standard ACPI methods.
-This feature shows readings from up to eight different sensors on older
-ThinkPads, and it has experimental support for up to sixteen different
-sensors on newer ThinkPads.
-
-EXPERIMENTAL: The 16-sensors feature is marked EXPERIMENTAL because the
-implementation directly accesses hardware registers and may not work as
-expected. USE WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module. When EXPERIMENTAL
-mode is enabled, reading the first 8 sensors on newer ThinkPads will
-also use an new experimental thermal sensor access mode.
+Most ThinkPads include six or more separate temperature sensors but only
+expose the CPU temperature through the standard ACPI methods. This
+feature shows readings from up to eight different sensors on older
+ThinkPads, and up to sixteen different sensors on newer ThinkPads.
For example, on the X40, a typical output may be:
temperatures: 42 42 45 41 36 -128 33 -128
-EXPERIMENTAL: On the T43/p, a typical output may be:
+On the T43/p, a typical output may be:
temperatures: 48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
The mapping of thermal sensors to physical locations varies depending on
@@ -562,7 +748,8 @@ http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
2: System board, left side (near PCMCIA slot), reported as HDAPS temp
3: PCMCIA slot
9: MCH (northbridge) to DRAM Bus
-10: ICH (southbridge), under Mini-PCI card, under touchpad
+10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI
+ card, under touchpad
11: Power regulator, underside of system board, below F2 key
The A31 has a very atypical layout for the thermal sensors
@@ -681,6 +868,12 @@ cannot be controlled.
The backlight control has eight levels, ranging from 0 to 7. Some of the
levels may not be distinct.
+There are two interfaces to the firmware for brightness control, EC and CMOS.
+To select which one should be used, use the brightness_mode module parameter:
+brightness_mode=1 selects EC mode, brightness_mode=2 selects CMOS mode,
+brightness_mode=3 selects both EC and CMOS. The driver tries to autodetect
+which interface to use.
+
Procfs notes:
The available commands are:
@@ -976,3 +1169,9 @@ Sysfs interface changelog:
0x000100: Initial sysfs support, as a single platform driver and
device.
+0x000200: Hot key support for 32 hot keys, and radio slider switch
+ support.
+0x010000: Hot keys are now handled by default over the input
+ layer, the radio switch generates input event EV_RADIO,
+ and the driver enables hot key handling by default in
+ the firmware.
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 1d516f24ba5..aaaa61ea421 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -150,6 +150,7 @@ config THINKPAD_ACPI
depends on X86 && ACPI
select BACKLIGHT_CLASS_DEVICE
select HWMON
+ select NVRAM
---help---
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
@@ -196,4 +197,17 @@ config THINKPAD_ACPI_BAY
If you are not sure, say Y here.
+config THINKPAD_ACPI_INPUT_ENABLED
+ bool "Enable input layer support by default"
+ depends on THINKPAD_ACPI
+ default y
+ ---help---
+ Enables hot key handling over the input layer by default. If unset,
+ the driver does not enable any hot key handling by default, and also
+ starts up with a mostly empty keymap.
+
+ If you are not sure, say Y here. Say N to retain the deprecated
+ behavior of ibm-acpi, and thinkpad-acpi for kernels up to 2.6.21.
+
+
endif # MISC_DEVICES
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 95c0b96e83f..f15a58f7403 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -21,8 +21,8 @@
* 02110-1301, USA.
*/
-#define IBM_VERSION "0.14"
-#define TPACPI_SYSFS_VERSION 0x000100
+#define IBM_VERSION "0.15"
+#define TPACPI_SYSFS_VERSION 0x010000
/*
* Changelog:
@@ -92,6 +92,29 @@ MODULE_LICENSE("GPL");
/* Please remove this in year 2009 */
MODULE_ALIAS("ibm_acpi");
+/*
+ * DMI matching for module autoloading
+ *
+ * See http://thinkwiki.org/wiki/List_of_DMI_IDs
+ * See http://thinkwiki.org/wiki/BIOS_Upgrade_Downloads
+ *
+ * Only models listed in thinkwiki will be supported, so add yours
+ * if it is not there yet.
+ */
+#define IBM_BIOS_MODULE_ALIAS(__type) \
+ MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW")
+
+/* Non-ancient thinkpads */
+MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
+MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*");
+
+/* Ancient thinkpad BIOSes have to be identified by
+ * BIOS type or model number, and there are far less
+ * BIOS types than model numbers... */
+IBM_BIOS_MODULE_ALIAS("I[B,D,H,I,M,N,O,T,W,V,Y,Z]");
+IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]");
+IBM_BIOS_MODULE_ALIAS("K[U,X-Z]");
+
#define __unused __attribute__ ((unused))
/****************************************************************************
@@ -106,7 +129,7 @@ MODULE_ALIAS("ibm_acpi");
* ACPI basic handles
*/
-static acpi_handle root_handle = NULL;
+static acpi_handle root_handle;
#define IBM_HANDLE(object, parent, paths...) \
static acpi_handle object##_handle; \
@@ -487,19 +510,36 @@ static char *next_cmd(char **cmds)
/****************************************************************************
****************************************************************************
*
- * Device model: hwmon and platform
+ * Device model: input, hwmon and platform
*
****************************************************************************
****************************************************************************/
-static struct platform_device *tpacpi_pdev = NULL;
-static struct class_device *tpacpi_hwmon = NULL;
+static struct platform_device *tpacpi_pdev;
+static struct class_device *tpacpi_hwmon;
+static struct input_dev *tpacpi_inputdev;
+
+
+static int tpacpi_resume_handler(struct platform_device *pdev)
+{
+ struct ibm_struct *ibm, *itmp;
+
+ list_for_each_entry_safe(ibm, itmp,
+ &tpacpi_all_drivers,
+ all_drivers) {
+ if (ibm->resume)
+ (ibm->resume)();
+ }
+
+ return 0;
+}
static struct platform_driver tpacpi_pdriver = {
.driver = {
.name = IBM_DRVR_NAME,
.owner = THIS_MODULE,
},
+ .resume = tpacpi_resume_handler,
};
@@ -677,9 +717,19 @@ static int __init thinkpad_acpi_driver_init(struct ibm_init_struct *iibm)
printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
printk(IBM_INFO "%s\n", IBM_URL);
- if (ibm_thinkpad_ec_found)
- printk(IBM_INFO "ThinkPad EC firmware %s\n",
- ibm_thinkpad_ec_found);
+ printk(IBM_INFO "ThinkPad BIOS %s, EC %s\n",
+ (thinkpad_id.bios_version_str) ?
+ thinkpad_id.bios_version_str : "unknown",
+ (thinkpad_id.ec_version_str) ?
+ thinkpad_id.ec_version_str : "unknown");
+
+ if (thinkpad_id.vendor && thinkpad_id.model_str)
+ printk(IBM_INFO "%s %s\n",
+ (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) ?
+ "IBM" : ((thinkpad_id.vendor ==
+ PCI_VENDOR_ID_LENOVO) ?
+ "Lenovo" : "Unknown vendor"),
+ thinkpad_id.model_str);
return 0;
}
@@ -704,16 +754,28 @@ static struct ibm_struct thinkpad_acpi_driver_data = {
*/
static int hotkey_orig_status;
-static int hotkey_orig_mask;
+static u32 hotkey_orig_mask;
+static u32 hotkey_all_mask;
+static u32 hotkey_reserved_mask;
+
+static u16 *hotkey_keycode_map;
-static struct attribute_set *hotkey_dev_attributes = NULL;
+static struct attribute_set *hotkey_dev_attributes;
+
+static int hotkey_get_wlsw(int *status)
+{
+ if (!acpi_evalf(hkey_handle, status, "WLSW", "d"))
+ return -EIO;
+ return 0;
+}
/* sysfs hotkey enable ------------------------------------------------- */
static ssize_t hotkey_enable_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- int res, status, mask;
+ int res, status;
+ u32 mask;
res = hotkey_get(&status, &mask);
if (res)
@@ -727,7 +789,8 @@ static ssize_t hotkey_enable_store(struct device *dev,
const char *buf, size_t count)
{
unsigned long t;
- int res, status, mask;
+ int res, status;
+ u32 mask;
if (parse_strtoul(buf, 1, &t))
return -EINVAL;
@@ -748,13 +811,14 @@ static ssize_t hotkey_mask_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- int res, status, mask;
+ int res, status;
+ u32 mask;
res = hotkey_get(&status, &mask);
if (res)
return res;
- return snprintf(buf, PAGE_SIZE, "0x%04x\n", mask);
+ return snprintf(buf, PAGE_SIZE, "0x%08x\n", mask);
}
static ssize_t hotkey_mask_store(struct device *dev,
@@ -762,9 +826,10 @@ static ssize_t hotkey_mask_store(struct device *dev,
const char *buf, size_t count)
{
unsigned long t;
- int res, status, mask;
+ int res, status;
+ u32 mask;
- if (parse_strtoul(buf, 0xffff, &t))
+ if (parse_strtoul(buf, 0xffffffffUL, &t))
return -EINVAL;
res = hotkey_get(&status, &mask);
@@ -794,26 +859,123 @@ static ssize_t hotkey_bios_mask_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- return snprintf(buf, PAGE_SIZE, "0x%04x\n", hotkey_orig_mask);
+ return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_orig_mask);
}
static struct device_attribute dev_attr_hotkey_bios_mask =
__ATTR(hotkey_bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL);
+/* sysfs hotkey all_mask ----------------------------------------------- */
+static ssize_t hotkey_all_mask_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_all_mask);
+}
+
+static struct device_attribute dev_attr_hotkey_all_mask =
+ __ATTR(hotkey_all_mask, S_IRUGO, hotkey_all_mask_show, NULL);
+
+/* sysfs hotkey recommended_mask --------------------------------------- */
+static ssize_t hotkey_recommended_mask_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "0x%08x\n",
+ hotkey_all_mask & ~hotkey_reserved_mask);
+}
+
+static struct device_attribute dev_attr_hotkey_recommended_mask =
+ __ATTR(hotkey_recommended_mask, S_IRUGO,
+ hotkey_recommended_mask_show, NULL);
+
+/* sysfs hotkey radio_sw ----------------------------------------------- */
+static ssize_t hotkey_radio_sw_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res, s;
+ res = hotkey_get_wlsw(&s);
+ if (res < 0)
+ return res;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", !!s);
+}
+
+static struct device_attribute dev_attr_hotkey_radio_sw =
+ __ATTR(hotkey_radio_sw, S_IRUGO, hotkey_radio_sw_show, NULL);
+
/* --------------------------------------------------------------------- */
static struct attribute *hotkey_mask_attributes[] = {
&dev_attr_hotkey_mask.attr,
&dev_attr_hotkey_bios_enabled.attr,
&dev_attr_hotkey_bios_mask.attr,
+ &dev_attr_hotkey_all_mask.attr,
+ &dev_attr_hotkey_recommended_mask.attr,
};
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
- int res;
+
+ static u16 ibm_keycode_map[] __initdata = {
+ /* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */
+ KEY_FN_F1, KEY_FN_F2, KEY_COFFEE, KEY_SLEEP,
+ KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8,
+ KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND,
+ /* Scan codes 0x0C to 0x0F: Other ACPI HKEY hot keys */
+ KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */
+ KEY_UNKNOWN, /* 0x0D: FN+INSERT */
+ KEY_UNKNOWN, /* 0x0E: FN+DELETE */
+ KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */
+ /* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */
+ KEY_RESERVED, /* 0x10: FN+END (brightness down) */
+ KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */
+ KEY_UNKNOWN, /* 0x12: FN+PGDOWN */
+ KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */
+ KEY_RESERVED, /* 0x14: VOLUME UP */
+ KEY_RESERVED, /* 0x15: VOLUME DOWN */
+ KEY_RESERVED, /* 0x16: MUTE */
+ KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */
+ /* (assignments unknown, please report if found) */
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+ };
+ static u16 lenovo_keycode_map[] __initdata = {
+ /* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */
+ KEY_FN_F1, KEY_COFFEE, KEY_BATTERY, KEY_SLEEP,
+ KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8,
+ KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND,
+ /* Scan codes 0x0C to 0x0F: Other ACPI HKEY hot keys */
+ KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */
+ KEY_UNKNOWN, /* 0x0D: FN+INSERT */
+ KEY_UNKNOWN, /* 0x0E: FN+DELETE */
+ KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */
+ /* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */
+ KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */
+ KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */
+ KEY_UNKNOWN, /* 0x12: FN+PGDOWN */
+ KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */
+ KEY_RESERVED, /* 0x14: VOLUME UP */
+ KEY_RESERVED, /* 0x15: VOLUME DOWN */
+ KEY_RESERVED, /* 0x16: MUTE */
+ KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */
+ /* (assignments unknown, please report if found) */
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+ };
+
+#define TPACPI_HOTKEY_MAP_LEN ARRAY_SIZE(ibm_keycode_map)
+#define TPACPI_HOTKEY_MAP_SIZE sizeof(ibm_keycode_map)
+#define TPACPI_HOTKEY_MAP_TYPESIZE sizeof(ibm_keycode_map[0])
+
+ int res, i;
+ int status;
vdbg_printk(TPACPI_DBG_INIT, "initializing hotkey subdriver\n");
+ BUG_ON(!tpacpi_inputdev);
+
IBM_ACPIHANDLE_INIT(hkey);
mutex_init(&hotkey_mutex);
@@ -824,7 +986,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
str_supported(tp_features.hotkey));
if (tp_features.hotkey) {
- hotkey_dev_attributes = create_attr_set(4, NULL);
+ hotkey_dev_attributes = create_attr_set(7, NULL);
if (!hotkey_dev_attributes)
return -ENOMEM;
res = add_to_attr_set(hotkey_dev_attributes,
@@ -840,19 +1002,92 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
str_supported(tp_features.hotkey_mask));
+ if (tp_features.hotkey_mask) {
+ /* MHKA available in A31, R40, R40e, T4x, X31, and later */
+ if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
+ "MHKA", "qd"))
+ hotkey_all_mask = 0x080cU; /* FN+F12, FN+F4, FN+F3 */
+ }
+
res = hotkey_get(&hotkey_orig_status, &hotkey_orig_mask);
if (!res && tp_features.hotkey_mask) {
res = add_many_to_attr_set(hotkey_dev_attributes,
hotkey_mask_attributes,
ARRAY_SIZE(hotkey_mask_attributes));
}
+
+ /* Not all thinkpads have a hardware radio switch */
+ if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
+ tp_features.hotkey_wlsw = 1;
+ printk(IBM_INFO
+ "radio switch found; radios are %s\n",
+ enabled(status, 0));
+ res = add_to_attr_set(hotkey_dev_attributes,
+ &dev_attr_hotkey_radio_sw.attr);
+ }
+
if (!res)
res = register_attr_set_with_sysfs(
hotkey_dev_attributes,
&tpacpi_pdev->dev.kobj);
+ if (res)
+ return res;
+
+ /* Set up key map */
+
+ hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
+ GFP_KERNEL);
+ if (!hotkey_keycode_map) {
+ printk(IBM_ERR "failed to allocate memory for key map\n");
+ return -ENOMEM;
+ }
+
+ if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
+ dbg_printk(TPACPI_DBG_INIT,
+ "using Lenovo default hot key map\n");
+ memcpy(hotkey_keycode_map, &lenovo_keycode_map,
+ TPACPI_HOTKEY_MAP_SIZE);
+ } else {
+ dbg_printk(TPACPI_DBG_INIT,
+ "using IBM default hot key map\n");
+ memcpy(hotkey_keycode_map, &ibm_keycode_map,
+ TPACPI_HOTKEY_MAP_SIZE);
+ }
+#ifndef CONFIG_THINKPAD_ACPI_INPUT_ENABLED
+ for (i = 0; i < 12; i++)
+ hotkey_keycode_map[i] = KEY_UNKNOWN;
+#endif /* ! CONFIG_THINKPAD_ACPI_INPUT_ENABLED */
+
+ set_bit(EV_KEY, tpacpi_inputdev->evbit);
+ set_bit(EV_MSC, tpacpi_inputdev->evbit);
+ set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
+ tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
+ tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN;
+ tpacpi_inputdev->keycode = hotkey_keycode_map;
+ for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) {
+ if (hotkey_keycode_map[i] != KEY_RESERVED) {
+ set_bit(hotkey_keycode_map[i],
+ tpacpi_inputdev->keybit);
+ } else {
+ if (i < sizeof(hotkey_reserved_mask)*8)
+ hotkey_reserved_mask |= 1 << i;
+ }
+ }
+
+ if (tp_features.hotkey_wlsw) {
+ set_bit(EV_SW, tpacpi_inputdev->evbit);
+ set_bit(SW_RADIO, tpacpi_inputdev->swbit);
+ }
+
+#ifdef CONFIG_THINKPAD_ACPI_INPUT_ENABLED
+ dbg_printk(TPACPI_DBG_INIT,
+ "enabling hot key handling\n");
+ res = hotkey_set(1, (hotkey_all_mask & ~hotkey_reserved_mask)
+ | hotkey_orig_mask);
if (res)
return res;
+#endif /* CONFIG_THINKPAD_ACPI_INPUT_ENABLED */
}
return (tp_features.hotkey)? 0 : 1;
@@ -875,22 +1110,101 @@ static void hotkey_exit(void)
}
}
+static void tpacpi_input_send_key(unsigned int scancode,
+ unsigned int keycode)
+{
+ if (keycode != KEY_RESERVED) {
+ input_report_key(tpacpi_inputdev, keycode, 1);
+ if (keycode == KEY_UNKNOWN)
+ input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
+ scancode);
+ input_sync(tpacpi_inputdev);
+
+ input_report_key(tpacpi_inputdev, keycode, 0);
+ if (keycode == KEY_UNKNOWN)
+ input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
+ scancode);
+ input_sync(tpacpi_inputdev);
+ }
+}
+
+static void tpacpi_input_send_radiosw(void)
+{
+ int wlsw;
+
+ if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw))
+ input_report_switch(tpacpi_inputdev,
+ SW_RADIO, !!wlsw);
+}
+
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
{
- int hkey;
+ u32 hkey;
+ unsigned int keycode, scancode;
+ int sendacpi = 1;
+
+ if (event == 0x80 && acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) {
+ if (tpacpi_inputdev->users > 0) {
+ switch (hkey >> 12) {
+ case 1:
+ /* 0x1000-0x1FFF: key presses */
+ scancode = hkey & 0xfff;
+ if (scancode > 0 && scancode < 0x21) {
+ scancode--;
+ keycode = hotkey_keycode_map[scancode];
+ tpacpi_input_send_key(scancode, keycode);
+ sendacpi = (keycode == KEY_RESERVED
+ || keycode == KEY_UNKNOWN);
+ } else {
+ printk(IBM_ERR
+ "hotkey 0x%04x out of range for keyboard map\n",
+ hkey);
+ }
+ break;
+ case 5:
+ /* 0x5000-0x5FFF: LID */
+ /* we don't handle it through this path, just
+ * eat up known LID events */
+ if (hkey != 0x5001 && hkey != 0x5002) {
+ printk(IBM_ERR
+ "unknown LID-related hotkey event: 0x%04x\n",
+ hkey);
+ }
+ break;
+ case 7:
+ /* 0x7000-0x7FFF: misc */
+ if (tp_features.hotkey_wlsw && hkey == 0x7000) {
+ tpacpi_input_send_radiosw();
+ sendacpi = 0;
+ break;
+ }
+ /* fallthrough to default */
+ default:
+ /* case 2: dock-related */
+ /* 0x2305 - T43 waking up due to bay lever eject while aslept */
+ /* case 3: ultra-bay related. maybe bay in dock? */
+ /* 0x3003 - T43 after wake up by bay lever eject (0x2305) */
+ printk(IBM_NOTICE "unhandled hotkey event 0x%04x\n", hkey);
+ }
+ }
- if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
- acpi_bus_generate_event(ibm->acpi->device, event, hkey);
- else {
- printk(IBM_ERR "unknown hotkey event %d\n", event);
+ if (sendacpi)
+ acpi_bus_generate_event(ibm->acpi->device, event, hkey);
+ } else {
+ printk(IBM_ERR "unknown hotkey notification event %d\n", event);
acpi_bus_generate_event(ibm->acpi->device, event, 0);
}
}
+static void hotkey_resume(void)
+{
+ tpacpi_input_send_radiosw();
+}
+
/*
* Call with hotkey_mutex held
*/
-static int hotkey_get(int *status, int *mask)
+static int hotkey_get(int *status, u32 *mask)
{
if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
return -EIO;
@@ -905,7 +1219,7 @@ static int hotkey_get(int *status, int *mask)
/*
* Call with hotkey_mutex held
*/
-static int hotkey_set(int status, int mask)
+static int hotkey_set(int status, u32 mask)
{
int i;
@@ -926,7 +1240,8 @@ static int hotkey_set(int status, int mask)
/* procfs -------------------------------------------------------------- */
static int hotkey_read(char *p)
{
- int res, status, mask;
+ int res, status;
+ u32 mask;
int len = 0;
if (!tp_features.hotkey) {
@@ -944,7 +1259,7 @@ static int hotkey_read(char *p)
len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
if (tp_features.hotkey_mask) {
- len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
+ len += sprintf(p + len, "mask:\t\t0x%08x\n", mask);
len += sprintf(p + len,
"commands:\tenable, disable, reset, <mask>\n");
} else {
@@ -957,7 +1272,8 @@ static int hotkey_read(char *p)
static int hotkey_write(char *buf)
{
- int res, status, mask;
+ int res, status;
+ u32 mask;
char *cmd;
int do_cmd = 0;
@@ -1012,6 +1328,7 @@ static struct ibm_struct hotkey_driver_data = {
.read = hotkey_read,
.write = hotkey_write,
.exit = hotkey_exit,
+ .resume = hotkey_resume,
.acpi = &ibm_hotkey_acpidriver,
};
@@ -1770,7 +2087,10 @@ static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
.type = ACPI_SYSTEM_NOTIFY,
},
{
- .hid = IBM_PCI_HID,
+ /* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING.
+ * We just use it to get notifications of dock hotplug
+ * in very old thinkpads */
+ .hid = PCI_ROOT_HID_STRING,
.notify = dock_notify,
.handle = &pci_handle,
.type = ACPI_SYSTEM_NOTIFY,
@@ -1829,7 +2149,7 @@ static int __init dock_init2(struct ibm_init_struct *iibm)
static void dock_notify(struct ibm_struct *ibm, u32 event)
{
int docked = dock_docked();
- int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, IBM_PCI_HID);
+ int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, PCI_ROOT_HID_STRING);
if (event == 1 && !pci) /* 570 */
acpi_bus_generate_event(ibm->acpi->device, event, 1); /* button */
@@ -2389,7 +2709,7 @@ static int __init thermal_init(struct ibm_init_struct *iibm)
acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
- if (ibm_thinkpad_ec_found && experimental) {
+ if (thinkpad_id.ec_model) {
/*
* Direct EC access mode: sensors at registers
* 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for
@@ -2533,6 +2853,8 @@ static int thermal_get_sensor(int idx, s32 *value)
snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx);
if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
return -EIO;
+ if (t > 127 || t < -127)
+ t = TP_EC_THERMAL_TMP_NA;
*value = t * 1000;
return 0;
}
@@ -2671,22 +2993,39 @@ static struct ibm_struct ecdump_driver_data = {
* Backlight/brightness subdriver
*/
-static struct backlight_device *ibm_backlight_device = NULL;
+static struct backlight_device *ibm_backlight_device;
static struct backlight_ops ibm_backlight_data = {
.get_brightness = brightness_get,
.update_status = brightness_update_status,
};
+static struct mutex brightness_mutex;
+
static int __init brightness_init(struct ibm_init_struct *iibm)
{
int b;
vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
+ mutex_init(&brightness_mutex);
+
+ if (!brightness_mode) {
+ if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO)
+ brightness_mode = 2;
+ else
+ brightness_mode = 3;
+
+ dbg_printk(TPACPI_DBG_INIT, "selected brightness_mode=%d\n",
+ brightness_mode);
+ }
+
+ if (brightness_mode > 3)
+ return -EINVAL;
+
b = brightness_get(NULL);
if (b < 0)
- return b;
+ return 1;
ibm_backlight_device = backlight_device_register(
TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
@@ -2722,34 +3061,79 @@ static int brightness_update_status(struct backlight_device *bd)
bd->props.brightness : 0);
}
+/*
+ * ThinkPads can read brightness from two places: EC 0x31, or
+ * CMOS NVRAM byte 0x5E, bits 0-3.
+ */
static int brightness_get(struct backlight_device *bd)
{
- u8 level;
- if (!acpi_ec_read(brightness_offset, &level))
- return -EIO;
+ u8 lec = 0, lcmos = 0, level = 0;
- level &= 0x7;
+ if (brightness_mode & 1) {
+ if (!acpi_ec_read(brightness_offset, &lec))
+ return -EIO;
+ lec &= 7;
+ level = lec;
+ };
+ if (brightness_mode & 2) {
+ lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS)
+ & TP_NVRAM_MASK_LEVEL_BRIGHTNESS)
+ >> TP_NVRAM_POS_LEVEL_BRIGHTNESS;
+ level = lcmos;
+ }
+
+ if (brightness_mode == 3 && lec != lcmos) {
+ printk(IBM_ERR
+ "CMOS NVRAM (%u) and EC (%u) do not agree "
+ "on display brightness level\n",
+ (unsigned int) lcmos,
+ (unsigned int) lec);
+ return -EIO;
+ }
return level;
}
static int brightness_set(int value)
{
- int cmos_cmd, inc, i;
- int current_value = brightness_get(NULL);
+ int cmos_cmd, inc, i, res;
+ int current_value;
+
+ if (value > 7)
+ return -EINVAL;
- value &= 7;
+ res = mutex_lock_interruptible(&brightness_mutex);
+ if (res < 0)
+ return res;
+
+ current_value = brightness_get(NULL);
+ if (current_value < 0) {
+ res = current_value;
+ goto errout;
+ }
- cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN;
+ cmos_cmd = value > current_value ?
+ TP_CMOS_BRIGHTNESS_UP :
+ TP_CMOS_BRIGHTNESS_DOWN;
inc = value > current_value ? 1 : -1;
+
+ res = 0;
for (i = current_value; i != value; i += inc) {
- if (issue_thinkpad_cmos_command(cmos_cmd))
- return -EIO;
- if (!acpi_ec_write(brightness_offset, i + inc))
- return -EIO;
+ if ((brightness_mode & 2) &&
+ issue_thinkpad_cmos_command(cmos_cmd)) {
+ res = -EIO;
+ goto errout;
+ }
+ if ((brightness_mode & 1) &&
+ !acpi_ec_write(brightness_offset, i + inc)) {
+ res = -EIO;
+ goto errout;;
+ }
}
- return 0;
+errout:
+ mutex_unlock(&brightness_mutex);
+ return res;
}
static int brightness_read(char *p)
@@ -3273,20 +3657,19 @@ static int __init fan_init(struct ibm_init_struct *iibm)
* Enable for TP-1Y (T43), TP-78 (R51e),
* TP-76 (R52), TP-70 (T43, R52), which are known
* to be buggy. */
- if (fan_control_initial_status == 0x07 &&
- ibm_thinkpad_ec_found &&
- ((ibm_thinkpad_ec_found[0] == '1' &&
- ibm_thinkpad_ec_found[1] == 'Y') ||
- (ibm_thinkpad_ec_found[0] == '7' &&
- (ibm_thinkpad_ec_found[1] == '6' ||
- ibm_thinkpad_ec_found[1] == '8' ||
- ibm_thinkpad_ec_found[1] == '0'))
- )) {
- printk(IBM_NOTICE
- "fan_init: initial fan status is "
- "unknown, assuming it is in auto "
- "mode\n");
- tp_features.fan_ctrl_status_undef = 1;
+ if (fan_control_initial_status == 0x07) {
+ switch (thinkpad_id.ec_model) {
+ case 0x5931: /* TP-1Y */
+ case 0x3837: /* TP-78 */
+ case 0x3637: /* TP-76 */
+ case 0x3037: /* TP-70 */
+ printk(IBM_NOTICE
+ "fan_init: initial fan status is "
+ "unknown, assuming it is in auto "
+ "mode\n");
+ tp_features.fan_ctrl_status_undef = 1;
+ ;;
+ }
}
} else {
printk(IBM_ERR
@@ -3474,7 +3857,7 @@ static void fan_watchdog_fire(struct work_struct *ignored)
static void fan_watchdog_reset(void)
{
- static int fan_watchdog_active = 0;
+ static int fan_watchdog_active;
if (fan_control_access_mode == TPACPI_FAN_WR_NONE)
return;
@@ -3877,7 +4260,7 @@ static struct ibm_struct fan_driver_data = {
****************************************************************************/
/* /proc support */
-static struct proc_dir_entry *proc_dir = NULL;
+static struct proc_dir_entry *proc_dir;
/* Subdriver registry */
static LIST_HEAD(tpacpi_all_drivers);
@@ -4020,13 +4403,30 @@ static void ibm_exit(struct ibm_struct *ibm)
/* Probing */
-static char *ibm_thinkpad_ec_found = NULL;
-
-static char* __init check_dmi_for_ec(void)
+static void __init get_thinkpad_model_data(struct thinkpad_id_data *tp)
{
struct dmi_device *dev = NULL;
char ec_fw_string[18];
+ if (!tp)
+ return;
+
+ memset(tp, 0, sizeof(*tp));
+
+ if (dmi_name_in_vendors("IBM"))
+ tp->vendor = PCI_VENDOR_ID_IBM;
+ else if (dmi_name_in_vendors("LENOVO"))
+ tp->vendor = PCI_VENDOR_ID_LENOVO;
+ else
+ return;
+
+ tp->bios_version_str = kstrdup(dmi_get_system_info(DMI_BIOS_VERSION),
+ GFP_KERNEL);
+ if (!tp->bios_version_str)
+ return;
+ tp->bios_model = tp->bios_version_str[0]
+ | (tp->bios_version_str[1] << 8);
+
/*
* ThinkPad T23 or newer, A31 or newer, R50e or newer,
* X32 or newer, all Z series; Some models must have an
@@ -4040,10 +4440,20 @@ static char* __init check_dmi_for_ec(void)
ec_fw_string) == 1) {
ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
- return kstrdup(ec_fw_string, GFP_KERNEL);
+
+ tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
+ tp->ec_model = ec_fw_string[0]
+ | (ec_fw_string[1] << 8);
+ break;
}
}
- return NULL;
+
+ tp->model_str = kstrdup(dmi_get_system_info(DMI_PRODUCT_VERSION),
+ GFP_KERNEL);
+ if (strnicmp(tp->model_str, "ThinkPad", 8) != 0) {
+ kfree(tp->model_str);
+ tp->model_str = NULL;
+ }
}
static int __init probe_for_thinkpad(void)
@@ -4057,7 +4467,7 @@ static int __init probe_for_thinkpad(void)
* Non-ancient models have better DMI tagging, but very old models
* don't.
*/
- is_thinkpad = dmi_name_in_vendors("ThinkPad");
+ is_thinkpad = (thinkpad_id.model_str != NULL);
/* ec is required because many other handles are relative to it */
IBM_ACPIHANDLE_INIT(ec);
@@ -4073,7 +4483,7 @@ static int __init probe_for_thinkpad(void)
* false positives a damn great deal
*/
if (!is_thinkpad)
- is_thinkpad = dmi_name_in_vendors("IBM");
+ is_thinkpad = (thinkpad_id.vendor == PCI_VENDOR_ID_IBM);
if (!is_thinkpad && !force_load)
return -ENODEV;
@@ -4185,10 +4595,13 @@ static u32 dbg_level;
module_param_named(debug, dbg_level, uint, 0);
static int force_load;
-module_param(force_load, int, 0);
+module_param(force_load, bool, 0);
static int fan_control_allowed;
-module_param_named(fan_control, fan_control_allowed, int, 0);
+module_param_named(fan_control, fan_control_allowed, bool, 0);
+
+static int brightness_mode;
+module_param_named(brightness_mode, brightness_mode, int, 0);
#define IBM_PARAM(feature) \
module_param_call(feature, set_ibm_param, NULL, NULL, 0)
@@ -4216,12 +4629,16 @@ static int __init thinkpad_acpi_module_init(void)
int ret, i;
/* Driver-level probe */
+
+ get_thinkpad_model_data(&thinkpad_id);
ret = probe_for_thinkpad();
- if (ret)
+ if (ret) {
+ thinkpad_acpi_module_exit();
return ret;
+ }
/* Driver initialization */
- ibm_thinkpad_ec_found = check_dmi_for_ec();
+
IBM_ACPIHANDLE_INIT(ecrd);
IBM_ACPIHANDLE_INIT(ecwr);
@@ -4265,6 +4682,22 @@ static int __init thinkpad_acpi_module_init(void)
thinkpad_acpi_module_exit();
return ret;
}
+ tpacpi_inputdev = input_allocate_device();
+ if (!tpacpi_inputdev) {
+ printk(IBM_ERR "unable to allocate input device\n");
+ thinkpad_acpi_module_exit();
+ return -ENOMEM;
+ } else {
+ /* Prepare input device, but don't register */
+ tpacpi_inputdev->name = "ThinkPad Extra Buttons";
+ tpacpi_inputdev->phys = IBM_DRVR_NAME "/input0";
+ tpacpi_inputdev->id.bustype = BUS_HOST;
+ tpacpi_inputdev->id.vendor = (thinkpad_id.vendor) ?
+ thinkpad_id.vendor :
+ PCI_VENDOR_ID_IBM;
+ tpacpi_inputdev->id.product = TPACPI_HKEY_INPUT_PRODUCT;
+ tpacpi_inputdev->id.version = TPACPI_HKEY_INPUT_VERSION;
+ }
for (i = 0; i < ARRAY_SIZE(ibms_init); i++) {
ret = ibm_init(&ibms_init[i]);
if (ret >= 0 && *ibms_init[i].param)
@@ -4274,6 +4707,14 @@ static int __init thinkpad_acpi_module_init(void)
return ret;
}
}
+ ret = input_register_device(tpacpi_inputdev);
+ if (ret < 0) {
+ printk(IBM_ERR "unable to register input device\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ } else {
+ tp_features.input_device_registered = 1;
+ }
return 0;
}
@@ -4290,6 +4731,13 @@ static void thinkpad_acpi_module_exit(void)
dbg_printk(TPACPI_DBG_INIT, "finished subdriver exit path...\n");
+ if (tpacpi_inputdev) {
+ if (tp_features.input_device_registered)
+ input_unregister_device(tpacpi_inputdev);
+ else
+ input_free_device(tpacpi_inputdev);
+ }
+
if (tpacpi_hwmon)
hwmon_device_unregister(tpacpi_hwmon);
@@ -4302,7 +4750,9 @@ static void thinkpad_acpi_module_exit(void)
if (proc_dir)
remove_proc_entry(IBM_PROC_DIR, acpi_root_dir);
- kfree(ibm_thinkpad_ec_found);
+ kfree(thinkpad_id.bios_version_str);
+ kfree(thinkpad_id.ec_version_str);
+ kfree(thinkpad_id.model_str);
}
module_init(thinkpad_acpi_module_init);
diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h
index 72d62f2dabb..b7a4a888cc8 100644
--- a/drivers/misc/thinkpad_acpi.h
+++ b/drivers/misc/thinkpad_acpi.h
@@ -32,6 +32,7 @@
#include <linux/list.h>
#include <linux/mutex.h>
+#include <linux/nvram.h>
#include <linux/proc_fs.h>
#include <linux/sysfs.h>
#include <linux/backlight.h>
@@ -39,6 +40,7 @@
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/input.h>
#include <asm/uaccess.h>
#include <linux/dmi.h>
@@ -48,6 +50,7 @@
#include <acpi/acpi_drivers.h>
#include <acpi/acnamesp.h>
+#include <linux/pci_ids.h>
/****************************************************************************
* Main driver
@@ -78,6 +81,11 @@
#define TP_CMOS_BRIGHTNESS_UP 4
#define TP_CMOS_BRIGHTNESS_DOWN 5
+/* ThinkPad CMOS NVRAM constants */
+#define TP_NVRAM_ADDR_BRIGHTNESS 0x5e
+#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x07
+#define TP_NVRAM_POS_LEVEL_BRIGHTNESS 0
+
#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
@@ -98,9 +106,13 @@ static const char *str_supported(int is_supported);
#define vdbg_printk(a_dbg_level, format, arg...)
#endif
+/* Input IDs */
+#define TPACPI_HKEY_INPUT_VENDOR PCI_VENDOR_ID_IBM
+#define TPACPI_HKEY_INPUT_PRODUCT 0x5054 /* "TP" */
+#define TPACPI_HKEY_INPUT_VERSION 0x4101
+
/* ACPI HIDs */
#define IBM_HKEY_HID "IBM0068"
-#define IBM_PCI_HID "PNP0A03"
/* ACPI helpers */
static int __must_check acpi_evalf(acpi_handle handle,
@@ -161,6 +173,7 @@ static int parse_strtoul(const char *buf, unsigned long max,
static struct platform_device *tpacpi_pdev;
static struct class_device *tpacpi_hwmon;
static struct platform_driver tpacpi_pdriver;
+static struct input_dev *tpacpi_inputdev;
static int tpacpi_create_driver_attributes(struct device_driver *drv);
static void tpacpi_remove_driver_attributes(struct device_driver *drv);
@@ -168,9 +181,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv);
static int experimental;
static u32 dbg_level;
static int force_load;
-static char *ibm_thinkpad_ec_found;
-static char* check_dmi_for_ec(void);
static int thinkpad_acpi_module_init(void);
static void thinkpad_acpi_module_exit(void);
@@ -197,6 +208,7 @@ struct ibm_struct {
int (*read) (char *);
int (*write) (char *);
void (*exit) (void);
+ void (*resume) (void);
struct list_head all_drivers;
@@ -228,12 +240,29 @@ static struct {
u16 bluetooth:1;
u16 hotkey:1;
u16 hotkey_mask:1;
+ u16 hotkey_wlsw:1;
u16 light:1;
u16 light_status:1;
u16 wan:1;
u16 fan_ctrl_status_undef:1;
+ u16 input_device_registered:1;
} tp_features;
+struct thinkpad_id_data {
+ unsigned int vendor; /* ThinkPad vendor:
+ * PCI_VENDOR_ID_IBM/PCI_VENDOR_ID_LENOVO */
+
+ char *bios_version_str; /* Something like 1ZET51WW (1.03z) */
+ char *ec_version_str; /* Something like 1ZHT51WW-1.04a */
+
+ u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */
+ u16 ec_model;
+
+ char *model_str;
+};
+
+static struct thinkpad_id_data thinkpad_id;
+
static struct list_head tpacpi_all_drivers;
static struct ibm_init_struct ibms_init[];
@@ -300,6 +329,7 @@ static int bluetooth_write(char *buf);
static struct backlight_device *ibm_backlight_device;
static int brightness_offset = 0x31;
+static int brightness_mode;
static int brightness_init(struct ibm_init_struct *iibm);
static void brightness_exit(void);
@@ -415,14 +445,14 @@ static int fan_write_cmd_watchdog(const char *cmd, int *rc);
*/
static int hotkey_orig_status;
-static int hotkey_orig_mask;
+static u32 hotkey_orig_mask;
static struct mutex hotkey_mutex;
static int hotkey_init(struct ibm_init_struct *iibm);
static void hotkey_exit(void);
-static int hotkey_get(int *status, int *mask);
-static int hotkey_set(int status, int mask);
+static int hotkey_get(int *status, u32 *mask);
+static int hotkey_set(int status, u32 mask);
static void hotkey_notify(struct ibm_struct *ibm, u32 event);
static int hotkey_read(char *p);
static int hotkey_write(char *buf);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index b15c6498fe6..ced4d3f7610 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2040,6 +2040,8 @@
#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea
#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb
+#define PCI_VENDOR_ID_LENOVO 0x17aa
+
#define PCI_VENDOR_ID_ARECA 0x17d3
#define PCI_DEVICE_ID_ARECA_1110 0x1110
#define PCI_DEVICE_ID_ARECA_1120 0x1120