diff options
| -rw-r--r-- | arch/arm/mach-ep93xx/clock.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/core.c | 52 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/platform.h | 4 |
4 files changed, 70 insertions, 0 deletions
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 5f80092b6ac..e29bdef9b2e 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -96,6 +96,10 @@ static struct clk clk_keypad = { .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN, .set_rate = set_keytchclk_rate, }; +static struct clk clk_spi = { + .parent = &clk_xtali, + .rate = EP93XX_EXT_CLK_RATE, +}; static struct clk clk_pwm = { .parent = &clk_xtali, .rate = EP93XX_EXT_CLK_RATE, @@ -186,6 +190,7 @@ static struct clk_lookup clocks[] = { INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), INIT_CK("ep93xx-keypad", NULL, &clk_keypad), INIT_CK("ep93xx-fb", NULL, &clk_video), + INIT_CK("ep93xx-spi.0", NULL, &clk_spi), INIT_CK(NULL, "pwm_clk", &clk_pwm), INIT_CK(NULL, "m2p0", &clk_m2p0), INIT_CK(NULL, "m2p1", &clk_m2p1), @@ -473,6 +478,14 @@ static int __init ep93xx_clock_init(void) /* Initialize the pll2 derived clocks */ clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1); + /* + * EP93xx SSP clock rate was doubled in version E2. For more information + * see: + * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf + */ + if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2) + clk_spi.rate /= 2; + pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n", clk_pll1.rate / 1000000, clk_pll2.rate / 1000000); pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n", diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 8d3f77e9fa8..9092677f63e 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -31,10 +31,12 @@ #include <linux/amba/serial.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include <linux/spi/spi.h> #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_keypad.h> +#include <mach/ep93xx_spi.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -430,6 +432,56 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, platform_device_register(&ep93xx_i2c_device); } +/************************************************************************* + * EP93xx SPI peripheral handling + *************************************************************************/ +static struct ep93xx_spi_info ep93xx_spi_master_data; + +static struct resource ep93xx_spi_resources[] = { + { + .start = EP93XX_SPI_PHYS_BASE, + .end = EP93XX_SPI_PHYS_BASE + 0x18 - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EP93XX_SSP, + .end = IRQ_EP93XX_SSP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ep93xx_spi_device = { + .name = "ep93xx-spi", + .id = 0, + .dev = { + .platform_data = &ep93xx_spi_master_data, + }, + .num_resources = ARRAY_SIZE(ep93xx_spi_resources), + .resource = ep93xx_spi_resources, +}; + +/** + * ep93xx_register_spi() - registers spi platform device + * @info: ep93xx board specific spi master info (__initdata) + * @devices: SPI devices to register (__initdata) + * @num: number of SPI devices to register + * + * This function registers platform device for the EP93xx SPI controller and + * also makes sure that SPI pins are muxed so that I2S is not using those pins. + */ +void __init ep93xx_register_spi(struct ep93xx_spi_info *info, + struct spi_board_info *devices, int num) +{ + /* + * When SPI is used, we need to make sure that I2S is muxed off from + * SPI pins. + */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP); + + ep93xx_spi_master_data = *info; + spi_register_board_info(devices, num); + platform_device_register(&ep93xx_spi_device); +} /************************************************************************* * EP93xx LEDs diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 93e2ecc79ce..b1e096f0c2d 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -106,6 +106,7 @@ #define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) +#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) #define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) #define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index b663390b4d8..9a4413dd44b 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -6,9 +6,11 @@ struct i2c_gpio_platform_data; struct i2c_board_info; +struct spi_board_info; struct platform_device; struct ep93xxfb_mach_info; struct ep93xx_keypad_platform_data; +struct ep93xx_spi_info; struct ep93xx_eth_data { @@ -44,6 +46,8 @@ unsigned int ep93xx_chip_revision(void); void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, struct i2c_board_info *devices, int num); +void ep93xx_register_spi(struct ep93xx_spi_info *info, + struct spi_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); void ep93xx_register_pwm(int pwm0, int pwm1); int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); |