diff options
63 files changed, 3110 insertions, 1167 deletions
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 94a20fe8fed..f9a6e2c75f1 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -293,10 +293,23 @@ X!Idrivers/video/console/fonts.c <chapter id="input_subsystem"> <title>Input Subsystem</title> + <sect1><title>Input core</title> !Iinclude/linux/input.h !Edrivers/input/input.c !Edrivers/input/ff-core.c !Edrivers/input/ff-memless.c + </sect1> + <sect1><title>Polled input devices</title> +!Iinclude/linux/input-polldev.h +!Edrivers/input/input-polldev.c + </sect1> + <sect1><title>Matrix keyboars/keypads</title> +!Iinclude/linux/input/matrix_keypad.h + </sect1> + <sect1><title>Sparse keymap support</title> +!Iinclude/linux/input/sparse-keymap.h +!Edrivers/input/sparse-keymap.c + </sect1> </chapter> <chapter id="spi"> diff --git a/MAINTAINERS b/MAINTAINERS index f7b0ced8111..107a5a5a017 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -486,13 +486,6 @@ S: Maintained F: drivers/net/appletalk/ F: net/appletalk/ -APPLETOUCH TOUCHPAD DRIVER -M: Johannes Berg <johannes@sipsolutions.net> -L: linux-input@vger.kernel.org -S: Maintained -F: Documentation/input/appletouch.txt -F: drivers/input/mouse/appletouch.c - ARC FRAMEBUFFER DRIVER M: Jaya Kumar <jayalk@intworks.biz> S: Maintained diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index a57af3e99c7..809114d5a5a 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -866,6 +866,57 @@ static void __init at91_add_device_rtc(void) {} /* -------------------------------------------------------------------- + * Touchscreen + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) +static u64 tsadcc_dmamask = DMA_BIT_MASK(32); +static struct at91_tsadcc_data tsadcc_data; + +static struct resource tsadcc_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_TSC, + .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_TSC, + .end = AT91SAM9G45_ID_TSC, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device at91sam9g45_tsadcc_device = { + .name = "atmel_tsadcc", + .id = -1, + .dev = { + .dma_mask = &tsadcc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tsadcc_data, + }, + .resource = tsadcc_resources, + .num_resources = ARRAY_SIZE(tsadcc_resources), +}; + +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) +{ + if (!data) + return; + + at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */ + at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */ + at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */ + at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */ + + tsadcc_data = *data; + platform_device_register(&at91sam9g45_tsadcc_device); +} +#else +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d345f5453db..53aaa94df75 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -622,6 +622,7 @@ static void __init at91_add_device_tc(void) { } #if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) static u64 tsadcc_dmamask = DMA_BIT_MASK(32); +static struct at91_tsadcc_data tsadcc_data; static struct resource tsadcc_resources[] = { [0] = { @@ -642,22 +643,27 @@ static struct platform_device at91sam9rl_tsadcc_device = { .dev = { .dma_mask = &tsadcc_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tsadcc_data, }, .resource = tsadcc_resources, .num_resources = ARRAY_SIZE(tsadcc_resources), }; -void __init at91_add_device_tsadcc(void) +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) { + if (!data) + return; + at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */ at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */ at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */ at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */ + tsadcc_data = *data; platform_device_register(&at91sam9rl_tsadcc_device); } #else -void __init at91_add_device_tsadcc(void) {} +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} #endif diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 1cf4d868107..98f9f4bc939 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -229,6 +229,16 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data; /* + * Touchscreen + */ +static struct at91_tsadcc_data ek_tsadcc_data = { + .adc_clock = 300000, + .pendet_debounce = 0x0d, + .ts_sample_hold_time = 0x0a, +}; + + +/* * GPIO Buttons */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) @@ -379,6 +389,8 @@ static void __init ek_board_init(void) at91_add_device_i2c(0, NULL, 0); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); + /* Touch Screen */ + at91_add_device_tsadcc(&ek_tsadcc_data); /* Push Buttons */ ek_add_device_buttons(); /* AC97 */ diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index bd28e989e54..7ac20f3a206 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -243,6 +243,16 @@ static struct gpio_led ek_leds[] = { /* + * Touchscreen + */ +static struct at91_tsadcc_data ek_tsadcc_data = { + .adc_clock = 1000000, + .pendet_debounce = 0x0f, + .ts_sample_hold_time = 0x03, +}; + + +/* * GPIO Buttons */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) @@ -310,7 +320,7 @@ static void __init ek_board_init(void) /* AC97 */ at91_add_device_ac97(&ek_ac97_data); /* Touch Screen Controller */ - at91_add_device_tsadcc(); + at91_add_device_tsadcc(&ek_tsadcc_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* Push Buttons */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2295d80dd89..bb6f6a7ba5e 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -187,7 +187,12 @@ extern void __init at91_add_device_ac97(struct ac97c_platform_data *data); extern void __init at91_add_device_isi(void); /* Touchscreen Controller */ -extern void __init at91_add_device_tsadcc(void); +struct at91_tsadcc_data { + unsigned int adc_clock; + u8 pendet_debounce; + u8 ts_sample_hold_time; +}; +extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); /* CAN */ struct at91_can_data { diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h new file mode 100644 index 00000000000..b4e21a2976d --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/keyscan.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2009 Texas Instruments, Inc + * + * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef DAVINCI_KEYSCAN_H +#define DAVINCI_KEYSCAN_H + +#include <linux/io.h> + +enum davinci_matrix_types { + DAVINCI_KEYSCAN_MATRIX_4X4, + DAVINCI_KEYSCAN_MATRIX_5X3, +}; + +struct davinci_ks_platform_data { + unsigned short *keymap; + u32 keymapsize; + u8 rep:1; + u8 strobe; + u8 interval; + u8 matrix_type; +}; + +#endif + diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 950837cf9e9..5619007e7e0 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -46,8 +46,6 @@ extern void ctrl_alt_del(void); -#define to_handle_h(n) container_of(n, struct input_handle, h_node) - /* * Exported functions/variables */ @@ -132,6 +130,7 @@ int shift_state = 0; */ static struct input_handler kbd_handler; +static DEFINE_SPINLOCK(kbd_event_lock); static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */ static unsigned char shift_down[NR_SHIFT]; /* shift state counters.. */ static int dead_key_next; @@ -190,78 +189,85 @@ EXPORT_SYMBOL_GPL(unregister_keyboard_notifier); * etc.). So this means that scancodes for the extra function keys won't * be valid for the first event device, but will be for the second. */ + +struct getset_keycode_data { + unsigned int scancode; + unsigned int keycode; + int error; +}; + +static int getkeycode_helper(struct input_handle *handle, void *data) +{ + struct getset_keycode_data *d = data; + + d->error = input_get_keycode(handle->dev, d->scancode, &d->keycode); + + return d->error == 0; /* stop as soon as we successfully get one */ +} + int getkeycode(unsigned int scancode) { - struct input_handle *handle; - int keycode; - int error = -ENODEV; + struct getset_keycode_data d = { scancode, 0, -ENODEV }; - list_for_each_entry(handle, &kbd_handler.h_list, h_node) { - error = input_get_keycode(handle->dev, scancode, &keycode); - if (!error) - return keycode; - } + input_handler_for_each_handle(&kbd_handler, &d, getkeycode_helper); - return error; + return d.error ?: d.keycode; +} + +static int setkeycode_helper(struct input_handle *handle, void *data) +{ + struct getset_keycode_data *d = data; + + d->error = input_set_keycode(handle->dev, d->scancode, d->keycode); + + return d->error == 0; /* stop as soon as we successfully set one */ } int setkeycode(unsigned int scancode, unsigned int keycode) { - struct input_handle *handle; - int error = -ENODEV; + struct getset_keycode_data d = { scancode, keycode, -ENODEV }; - list_for_each_entry(handle, &kbd_handler.h_list, h_node) { - error = input_set_keycode(handle->dev, scancode, keycode); - if (!error) - break; - } + input_handler_for_each_handle(&kbd_handler, &d, setkeycode_helper); - return error; + return d.error; } /* * Making beeps and bells. */ -static void kd_nosound(unsigned long ignored) + +static int kd_sound_helper(struct input_handle *handle, void *data) { - struct input_handle *handle; + unsigned int *hz = data; + struct input_dev *dev = handle->dev; - list_for_each_entry(handle, &kbd_handler.h_list, h_node) { - if (test_bit(EV_SND, handle->dev->evbit)) { - if (test_bit(SND_TONE, handle->dev->sndbit)) - input_inject_event(handle, EV_SND, SND_TONE, 0); - if (test_bit(SND_BELL, handle->dev->sndbit)) - input_inject_event(handle, EV_SND, SND_BELL, 0); - } + if (test_bit(EV_SND, dev->evbit)) { + if (test_bit(SND_TONE, dev->sndbit)) + input_inject_event(handle, EV_SND, SND_TONE, *hz); + if (test_bit(SND_BELL, handle->dev->sndbit)) + input_inject_event(handle, EV_SND, SND_BELL, *hz ? 1 : 0); } + + return 0; +} + +static void kd_nosound(unsigned long ignored) +{ + static unsigned int zero; + + input_handler_for_each_handle(&kbd_handler, &zero, kd_sound_helper); } static DEFINE_TIMER(kd_mksound_timer, kd_nosound, 0, 0); void kd_mksound(unsigned int hz, unsigned int ticks) { - struct list_head *node; + del_timer_sync(&kd_mksound_timer); - del_timer(&kd_mksound_timer); + input_handler_for_each_handle(&kbd_handler, &hz, kd_sound_helper); - if (hz) { - list_for_each_prev(node, &kbd_handler.h_list) { - struct input_handle *handle = to_handle_h(node); - if (test_bit(EV_SND, handle->dev->evbit)) { - if (test_bit(SND_TONE, handle->dev->sndbit)) { - input_inject_event(handle, EV_SND, SND_TONE, hz); - break; - } - if (test_bit(SND_BELL, handle->dev->sndbit)) { - input_inject_event(handle, EV_SND, SND_BELL, 1); - break; - } - } - } - if (ticks) - mod_timer(&kd_mksound_timer, jiffies + ticks); - } else - kd_nosound(0); + if (hz && ticks) + mod_timer(&kd_mksound_timer, jiffies + ticks); } EXPORT_SYMBOL(kd_mksound); @@ -269,27 +275,34 @@ EXPORT_SYMBOL(kd_mksound); * Setting the keyboard rate. */ -int kbd_rate(struct kbd_repeat *rep) +static int kbd_rate_helper(struct input_handle *handle, void *data) { - struct list_head *node; - unsigned int d = 0; - unsigned int p = 0; - - list_for_each(node, &kbd_handler.h_list) { - struct input_handle *handle = to_handle_h(node); - struct input_dev *dev = handle->dev; - - if (test_bit(EV_REP, dev->evbit)) { - if (rep->delay > 0) - input_inject_event(handle, EV_REP, REP_DELAY, rep->delay); - if (rep->period > 0) - input_inject_event(handle, EV_REP, REP_PERIOD, rep->period); - d = dev->rep[REP_DELAY]; - p = dev->rep[REP_PERIOD]; - } + struct input_dev *dev = handle->dev; + struct kbd_repeat *rep = data; + + if (test_bit(EV_REP, dev->evbit)) { + + if (rep[0].delay > 0) + input_inject_event(handle, + EV_REP, REP_DELAY, rep[0].delay); + if (rep[0].period > 0) + input_inject_event(handle, + EV_REP, REP_PERIOD, rep[0].period); + + rep[1].delay = dev->rep[REP_DELAY]; + rep[1].period = dev->rep[REP_PERIOD]; } - rep->delay = d; - rep->period = p; + + return 0; +} + +int kbd_rate(struct kbd_repeat *rep) +{ + struct kbd_repeat data[2] = { *rep }; + + input_handler_for_each_handle(&kbd_handler, data, kbd_rate_helper); + *rep = data[1]; /* Copy currently used settings */ + return 0; } @@ -997,36 +1010,36 @@ static inline unsigned char getleds(void) return leds; } +static int kbd_update_leds_helper(struct input_handle *handle, void *data) +{ + unsigned char leds = *(unsigned char *)data; + + if (test_bit(EV_LED, handle->dev->evbit)) { + input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01)); + input_inject_event(handle, EV_LED, LED_NUML, !!(leds & 0x02)); + input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & 0x04)); + input_inject_event(handle, EV_SYN, SYN_REPORT, 0); + } + + return 0; +} + /* - * This routine is the bottom half of the keyboard interrupt - * routine, and runs with all interrupts enabled. It does - * console changing, led setting and copy_to_cooked, which can - * take a reasonably long time. - * - * Aside from timing (which isn't really that important for - * keyboard interrupts as they happen often), using the software - * interrupt routines for this thing allows us to easily mask - * this when we don't want any of the above to happen. - * This allows for easy and efficient race-condition prevention - * for kbd_start => input_inject_event(dev, EV_LED, ...) => ... + * This is the tasklet that updates LED state on all keyboards + * attached to the box. The reason we use tasklet is that we + * need to handle the scenario when keyboard handler is not + * registered yet but we already getting updates form VT to + * update led state. */ - static void kbd_bh(unsigned long dummy) { - struct list_head *node; unsigned char leds = getleds(); if (leds != ledstate) { - list_for_each(node, &kbd_handler.h_list) { - struct input_handle *handle = to_handle_h(node); - input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01)); - input_inject_event(handle, EV_LED, LED_NUML, !!(leds & 0x02)); - input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & 0x04)); - input_inject_event(handle, EV_SYN, SYN_REPORT, 0); - } + input_handler_for_each_handle(&kbd_handler, &leds, + kbd_update_leds_helper); + ledstate = leds; } - - ledstate = leds; } DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0); @@ -1136,7 +1149,7 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode, unsigned char u static void kbd_rawcode(unsigned char data) { struct vc_data *vc = vc_cons[fg_console].d; - kbd = kbd_table + fg_console; + kbd = kbd_table + vc->vc_num; if (kbd->kbdmode == VC_RAW) put_queue(vc, data); } @@ -1157,7 +1170,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) tty->driver_data = vc; } - kbd = kbd_table + fg_console; + kbd = kbd_table + vc->vc_num; if (keycode == KEY_LEFTALT || keycode == KEY_RIGHTALT) sysrq_alt = down ? keycode : 0; @@ -1296,10 +1309,16 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) static void kbd_event(struct input_handle *handle, unsigned int event_type, unsigned int event_code, int value) { + /* We are called with interrupts disabled, just take the lock */ + spin_lock(&kbd_event_lock); + if (event_type == EV_MSC && event_code == MSC_RAW && HW_RAW(handle->dev)) kbd_rawcode(value); if (event_type == EV_KEY) kbd_keycode(event_code, value, HW_RAW(handle->dev)); + + spin_unlock(&kbd_event_lock); + tasklet_schedule(&keyboard_tasklet); do_poke_blanked_console = 1; schedule_console_callback(); @@ -1363,15 +1382,11 @@ static void kbd_disconnect(struct input_handle *handle) */ static void kbd_start(struct input_handle *handle) { - unsigned char leds = ledstate; - tasklet_disable(&keyboard_tasklet); - if (leds != 0xff) { - input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01)); - input_inject_event(handle, EV_LED, LED_NUML, !!(leds & 0x02)); - input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & 0x04)); - input_inject_event(handle, EV_SYN, SYN_REPORT, 0); - } + + if (ledstate != 0xff) + kbd_update_leds_helper(handle, &ledstate); + tasklet_enable(&keyboard_tasklet); } diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 938100f14b1..3a2ccb09e2f 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -429,7 +429,7 @@ static bool dmi_matches(const struct dmi_system_id *dmi) for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) { int s = dmi->matches[i].slot; if (s == DMI_NONE) - continue; + break; if (dmi_ident[s] && strstr(dmi_ident[s], dmi->matches[i].substr)) continue; @@ -440,6 +440,15 @@ static bool dmi_matches(const struct dmi_system_id *dmi) } /** + * dmi_is_end_of_table - check for end-of-table marker + * @dmi: pointer to the dmi_system_id structure to check + */ +static bool dmi_is_end_of_table(const struct dmi_system_id *dmi) +{ + return dmi->matches[0].slot == DMI_NONE; +} + +/** * dmi_check_system - check system DMI data * @list: array of dmi_system_id structures to match against * All non-null elements of the list must match @@ -457,7 +466,7 @@ int dmi_check_system(const struct dmi_system_id *list) int count = 0; const struct dmi_system_id *d; - for (d = list; d->ident; d++) + for (d = list; !dmi_is_end_of_table(d); d++) if (dmi_matches(d)) { count++; if (d->callback && d->callback(d)) @@ -484,7 +493,7 @@ const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list) { const struct dmi_system_id *d; - for (d = list; d->ident; d++) + for (d = list; !dmi_is_end_of_table(d); d++) if (dmi_matches(d)) return d; diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c index b342926dd7f..f843443ba5c 100644 --- a/drivers/hid/usbhid/usbkbd.c +++ b/drivers/hid/usbhid/usbkbd.c @@ -266,7 +266,7 @@ static int usb_kbd_probe(struct usb_interface *iface, le16_to_cpu(dev->descriptor.idProduct)); usb_make_path(dev, kbd->phys, sizeof(kbd->phys)); - strlcpy(kbd->phys, "/input0", sizeof(kbd->phys)); + strlcat(kbd->phys, "/input0", sizeof(kbd->phys)); input_dev->name = kbd->name; input_dev->phys = kbd->phys; diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index cd50c00ab20..50af91ebd07 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -8,7 +8,7 @@ menu "Input device support" config INPUT tristate "Generic input layer (needed for keyboard, mouse, ...)" if EMBEDDED default y - ---help--- + help Say Y here if you have any input device (mouse, keyboard, tablet, joystick, steering wheel ...) connected to your system and want it to be available to applications. This includes standard PS/2 @@ -27,8 +27,7 @@ if INPUT config INPUT_FF_MEMLESS tristate "Support for memoryless force-feedback devices" - default n - ---help--- + help Say Y here if you have memoryless force-feedback input device such as Logitech WingMan Force 3D, ThrustMaster FireStorm Dual Power 2, or similar. You will also need to enable hardware-specific @@ -52,12 +51,25 @@ config INPUT_POLLDEV To compile this driver as a module, choose M here: the module will be called input-polldev. +config INPUT_SPARSEKMAP + tristate "Sparse keymap support library" + help + Say Y here if you are using a driver for an input + device that uses sparse keymap. This option is only + useful for out-of-tree drivers since in-tree drivers + select it automatically. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called sparse-keymap. + comment "Userland interfaces" config INPUT_MOUSEDEV tristate "Mouse interface" if EMBEDDED default y - ---help--- + help Say Y here if you want your mouse to be accessible as char devices 13:32+ - /dev/input/mouseX and 13:63 - /dev/input/mice as an emulated IntelliMouse Explorer PS/2 mouse. That way, all user space @@ -73,7 +85,7 @@ config INPUT_MOUSEDEV_PSAUX bool "Provide legacy /dev/psaux device" default y depends on INPUT_MOUSEDEV - ---help--- + help Say Y here if you want your mouse also be accessible as char device 10:1 - /dev/psaux. The data available through /dev/psaux is exactly the same as the data from /dev/input/mice. @@ -103,7 +115,7 @@ config INPUT_MOUSEDEV_SCREEN_Y config INPUT_JOYDEV tristate "Joystick interface" - ---help--- + help Say Y here if you want your joystick or gamepad to be accessible as char device 13:0+ - /dev/input/jsX device. @@ -125,7 +137,7 @@ config INPUT_EVDEV config INPUT_EVBUG tristate "Event debugging" - ---help--- + help Say Y here if you have a problem with the input subsystem and want all events (keypresses, mouse movements), to be output to the system log. While this is useful for debugging, it's also @@ -140,7 +152,7 @@ config INPUT_EVBUG config INPUT_APMPOWER tristate "Input Power Event -> APM Bridge" if EMBEDDED depends on INPUT && APM_EMULATION - ---help--- + help Say Y here if you want suspend key events to trigger a user requested suspend through APM. This is useful on embedded systems where such behaviour is desired without userspace diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 4c9c745a702..7ad212d31f9 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -9,6 +9,7 @@ input-core-objs := input.o input-compat.o ff-core.o obj-$(CONFIG_INPUT_FF_MEMLESS) += ff-memless.o obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o +obj-$(CONFIG_INPUT_SPARSEKMAP) += sparse-keymap.o obj-$(CONFIG_INPUT_MOUSEDEV) += mousedev.o obj-$(CONFIG_INPUT_JOYDEV) += joydev.o diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index 38df81fcdc3..b2f07aa1604 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -353,7 +353,7 @@ int input_ff_create(struct input_dev *dev, int max_effects) EXPORT_SYMBOL_GPL(input_ff_create); /** - * input_ff_free() - frees force feedback portion of input device + * input_ff_destroy() - frees force feedback portion of input device * @dev: input device supporting force feedback * * This function is only needed in error path as input core will @@ -369,6 +369,7 @@ void input_ff_destroy(struct input_dev *dev) if (ff->destroy) ff->destroy(ff); kfree(ff->private); + kfree(ff->effects); kfree(ff); dev->ff = NULL; } diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c index 0d3ce7a50fb..aa6713b4a98 100644 --- a/drivers/input/input-polldev.c +++ b/drivers/input/input-polldev.c @@ -56,14 +56,10 @@ static void input_polldev_stop_workqueue(void) mutex_unlock(&polldev_mutex); } -static void input_polled_device_work(struct work_struct *work) +static void input_polldev_queue_work(struct input_polled_dev *dev) { - struct input_polled_dev *dev = - container_of(work, struct input_polled_dev, work.work); unsigned long delay; - dev->poll(dev); - delay = msecs_to_jiffies(dev->poll_interval); if (delay >= HZ) delay = round_jiffies_relative(delay); @@ -71,6 +67,15 @@ static void input_polled_device_work(struct work_struct *work) queue_delayed_work(polldev_wq, &dev->work, delay); } +static void input_polled_device_work(struct work_struct *work) +{ + struct input_polled_dev *dev = + container_of(work, struct input_polled_dev, work.work); + + dev->poll(dev); + input_polldev_queue_work(dev); +} + static int input_open_polled_device(struct input_dev *input) { struct input_polled_dev *dev = input_get_drvdata(input); @@ -80,11 +85,12 @@ static int input_open_polled_device(struct input_dev *input) if (error) return error; - if (dev->flush) - dev->flush(dev); + if (dev->open) + dev->open(dev); - queue_delayed_work(polldev_wq, &dev->work, - msecs_to_jiffies(dev->poll_interval)); + /* Only start polling if polling is enabled */ + if (dev->poll_interval > 0) + queue_delayed_work(polldev_wq, &dev->work, 0); return 0; } @@ -95,8 +101,88 @@ static void input_close_polled_device(struct input_dev *input) cancel_delayed_work_sync(&dev->work); input_polldev_stop_workqueue(); + + if (dev->close) + dev->close(dev); } +/* SYSFS interface */ + +static ssize_t input_polldev_get_poll(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct input_polled_dev *polldev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", polldev->poll_interval); +} + +static ssize_t input_polldev_set_poll(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct input_polled_dev *polldev = dev_get_drvdata(dev); + struct input_dev *input = polldev->input; + unsigned long interval; + + if (strict_strtoul(buf, 0, &interval)) + return -EINVAL; + + if (interval < polldev->poll_interval_min) + return -EINVAL; + + if (interval > polldev->poll_interval_max) + return -EINVAL; + + mutex_lock(&input->mutex); + + polldev->poll_interval = interval; + + if (input->users) { + cancel_delayed_work_sync(&polldev->work); + if (polldev->poll_interval > 0) + input_polldev_queue_work(polldev); + } + + mutex_unlock(&input->mutex); + + return count; +} + +static DEVICE_ATTR(poll, S_IRUGO | S_IWUSR, input_polldev_get_poll, + input_polldev_set_poll); + + +static ssize_t input_polldev_get_max(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct input_polled_dev *polldev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", polldev->poll_interval_max); +} + +static DEVICE_ATTR(max, S_IRUGO, input_polldev_get_max, NULL); + +static ssize_t input_polldev_get_min(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct input_polled_dev *polldev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", polldev->poll_interval_min); +} + +static DEVICE_ATTR(min, S_IRUGO, input_polldev_get_min, NULL); + +static struct attribute *sysfs_attrs[] = { + &dev_attr_poll.attr, + &dev_attr_max.attr, + &dev_attr_min.attr, + NULL +}; + +static struct attribute_group input_polldev_attribute_group = { + .attrs = sysfs_attrs +}; + /** * input_allocate_polled_device - allocated memory polled device * @@ -126,7 +212,7 @@ EXPORT_SYMBOL(input_allocate_polled_device); * @dev: device to free * * The function frees memory allocated for polling device and drops - * reference to the associated input device (if present). + * reference to the associated input device. */ void input_free_polled_device(struct input_polled_dev *dev) { @@ -150,15 +236,38 @@ EXPORT_SYMBOL(input_free_polled_device); int input_register_polled_device(struct input_polled_dev *dev) { struct input_dev *input = dev->input; + int error; input_set_drvdata(input, dev); INIT_DELAYED_WORK(&dev->work, input_polled_device_work); if (!dev->poll_interval) dev->poll_interval = 500; + if (!dev->poll_interval_max) + dev->poll_interval_max = dev->poll_interval; input->open = input_open_polled_device; input->close = input_close_polled_device; - return input_register_device(input); + error = input_register_device(input); + if (error) + return error; + + error = sysfs_create_group(&input->dev.kobj, + &input_polldev_attribute_group); + if (error) { + input_unregister_device(input); + return error; + } + + /* + * Take extra reference to the underlying input device so + * that it survives call to input_unregister_polled_device() + * and is deleted only after input_free_polled_device() + * has been invoked. This is needed to ease task of freeing + * sparse keymaps. + */ + input_get_device(input); + + return 0; } EXPORT_SYMBOL(input_register_polled_device); @@ -169,13 +278,13 @@ EXPORT_SYMBOL(input_register_polled_device); * The function unregisters previously registered polled input * device from input layer. Polling is stopped and device is * ready to be freed with call to input_free_polled_device(). - * Callers should not attempt to access dev->input pointer - * after calling this function. */ void input_unregister_polled_device(struct input_polled_dev *dev) { + sysfs_remove_group(&dev->input->dev.kobj, + &input_polldev_attribute_group); + input_unregister_device(dev->input); - dev->input = NULL; } EXPORT_SYMBOL(input_unregister_polled_device); diff --git a/drivers/input/input.c b/drivers/input/input.c index 2266ecbfbc0..5c16001959c 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1658,6 +1658,38 @@ void input_unregister_handler(struct input_handler *handler) EXPORT_SYMBOL(input_unregister_handler); /** + * input_handler_for_each_handle - handle iterator + * @handler: input handler to iterate + * @data: data for the callback + * @fn: function to be called for each handle + * + * Iterate over @bus's list of devices, and call @fn for each, passing + * it @data and stop when @fn returns a non-zero value. The function is + * using RCU to traverse the list and therefore may be usind in atonic + * contexts. The @fn callback is invoked from RCU critical section and + * thus must not sleep. + */ +int input_handler_for_each_handle(struct input_handler *handler, void *data, + int (*fn)(struct input_handle *, void *)) +{ + struct input_handle *handle; + int retval = 0; + + rcu_read_lock(); + + list_for_each_entry_rcu(handle, &handler->h_list, h_node) { + retval = fn(handle, data); + if (retval) + break; + } + + rcu_read_unlock(); + + return retval; +} +EXPORT_SYMBOL(input_handler_for_each_handle); + +/** * input_register_handle - register a new input handle * @handle: handle to register * @@ -1690,7 +1722,7 @@ int input_register_handle(struct input_handle *handle) * we can't be racing with input_unregister_handle() * and so separate lock is not needed here. */ - list_add_tail(&handle->h_node, &handler->h_list); + list_add_tail_rcu(&handle->h_node, &handler->h_list); if (handler->start) handler->start(handle); @@ -1713,7 +1745,7 @@ void input_unregister_handle(struct input_handle *handle) { struct input_dev *dev = handle->dev; - list_del_init(&handle->h_node); + list_del_rcu(&handle->h_node); /* * Take dev->mutex to prevent race with input_release_device(). @@ -1721,6 +1753,7 @@ void input_unregister_handle(struct input_handle *handle) mutex_lock(&dev->mutex); list_del_rcu(&handle->d_node); mutex_unlock(&dev->mutex); + synchronize_rcu(); } EXPORT_SYMBOL(input_unregister_handle); diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 79e3edcced1..482cb1204e4 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -125,6 +125,7 @@ static const struct xpad_device { { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, + { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX }, @@ -146,6 +147,7 @@ static const struct xpad_device { { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, { 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_UNKNOWN } }; @@ -212,6 +214,7 @@ static struct usb_device_id xpad_table [] = { XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */ XPAD_XBOX360_VENDOR(0x1bad), /* Rock Band Drums */ + XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ { } }; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index ee98b1bc5d8..203b88a82b5 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -361,6 +361,16 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. +config KEYBOARD_DAVINCI + tristate "TI DaVinci Key Scan" + depends on ARCH_DAVINCI_DM365 + help + Say Y to enable keypad module support for the TI DaVinci + platforms (DM365). + + To compile this driver as a module, choose M here: the + module will be called davinci_keyscan. + config KEYBOARD_OMAP tristate "TI OMAP keypad support" depends on (ARCH_OMAP1 || ARCH_OMAP2) diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index babad5e58b7..68c017235ce 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o +obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 28e6110d1ff..a3573570c52 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -1567,9 +1567,8 @@ static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) return 0; } -static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { +static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { { - .ident = "Dell Laptop", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ @@ -1578,7 +1577,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_dell_laptop_forced_release_keys, }, { - .ident = "Dell Laptop", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ @@ -1587,7 +1585,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_dell_laptop_forced_release_keys, }, { - .ident = "HP 2133", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"), @@ -1596,7 +1593,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_hp_forced_release_keys, }, { - .ident = "HP Pavilion ZV6100", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"), @@ -1605,7 +1601,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_volume_forced_release_keys, }, { - .ident = "HP Presario R4000", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"), @@ -1614,7 +1609,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_volume_forced_release_keys, }, { - .ident = "HP Presario R4100", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"), @@ -1623,7 +1617,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_volume_forced_release_keys, }, { - .ident = "HP Presario R4200", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"), @@ -1632,7 +1625,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_volume_forced_release_keys, }, { - .ident = "Inventec Symphony", + /* Inventec Symphony */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), @@ -1641,7 +1634,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_volume_forced_release_keys, }, { - .ident = "Samsung NC10", + /* Samsung NC10 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), @@ -1650,7 +1643,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_samsung_forced_release_keys, }, { - .ident = "Samsung NC20", + /* Samsung NC20 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), @@ -1659,7 +1652,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_samsung_forced_release_keys, }, { - .ident = "Samsung SQ45S70S", + /* Samsung SQ45S70S */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), @@ -1668,7 +1661,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_samsung_forced_release_keys, }, { - .ident = "Fujitsu Amilo PA 1510", + /* Fujitsu Amilo PA 1510 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"), @@ -1677,7 +1670,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_volume_forced_release_keys, }, { - .ident = "Fujitsu Amilo Pi 3525", + /* Fujitsu Amilo Pi 3525 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"), @@ -1686,7 +1679,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_amilo_pi3525_forced_release_keys, }, { - .ident = "Fujitsu Amilo Xi 3650", + /* Fujitsu Amilo Xi 3650 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"), @@ -1695,7 +1688,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_amilo_xi3650_forced_release_keys, }, { - .ident = "Soltech Corporation TA12", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "TA12"), @@ -1704,7 +1696,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkdb_soltech_ta12_forced_release_keys, }, { - .ident = "OQO Model 01+", + /* OQO Model 01+ */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "OQO"), DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c new file mode 100644 index 00000000000..6e52d855f63 --- /dev/null +++ b/drivers/input/keyboard/davinci_keyscan.c @@ -0,0 +1,337 @@ +/* + * DaVinci Key Scan Driver for TI platforms + * + * Copyright (C) 2009 Texas Instruments, Inc + * + * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> + * + * Intial Code: Sandeep Paulraj <s-paulraj@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/errno.h> + +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/keyscan.h> + +/* Key scan registers */ +#define DAVINCI_KEYSCAN_KEYCTRL 0x0000 +#define DAVINCI_KEYSCAN_INTENA 0x0004 +#define DAVINCI_KEYSCAN_INTFLAG 0x0008 +#define DAVINCI_KEYSCAN_INTCLR 0x000c +#define DAVINCI_KEYSCAN_STRBWIDTH 0x0010 +#define DAVINCI_KEYSCAN_INTERVAL 0x0014 +#define DAVINCI_KEYSCAN_CONTTIME 0x0018 +#define DAVINCI_KEYSCAN_CURRENTST 0x001c +#define DAVINCI_KEYSCAN_PREVSTATE 0x0020 +#define DAVINCI_KEYSCAN_EMUCTRL 0x0024 +#define DAVINCI_KEYSCAN_IODFTCTRL 0x002c + +/* Key Control Register (KEYCTRL) */ +#define DAVINCI_KEYSCAN_KEYEN 0x00000001 +#define DAVINCI_KEYSCAN_PREVMODE 0x00000002 +#define DAVINCI_KEYSCAN_CHATOFF 0x00000004 +#define DAVINCI_KEYSCAN_AUTODET 0x00000008 +#define DAVINCI_KEYSCAN_SCANMODE 0x00000010 +#define DAVINCI_KEYSCAN_OUTTYPE 0x00000020 + +/* Masks for the interrupts */ +#define DAVINCI_KEYSCAN_INT_CONT 0x00000008 +#define DAVINCI_KEYSCAN_INT_OFF 0x00000004 +#define DAVINCI_KEYSCAN_INT_ON 0x00000002 +#define DAVINCI_KEYSCAN_INT_CHANGE 0x00000001 +#define DAVINCI_KEYSCAN_INT_ALL 0x0000000f + +struct davinci_ks { + struct input_dev *input; + struct davinci_ks_platform_data *pdata; + int irq; + void __iomem *base; + resource_size_t pbase; + size_t base_size; + unsigned short keymap[]; +}; + +/* Initializing the kp Module */ +static int __init davinci_ks_initialize(struct davinci_ks *davinci_ks) +{ + struct device *dev = &davinci_ks->input->dev; + struct davinci_ks_platform_data *pdata = davinci_ks->pdata; + u32 matrix_ctrl; + + /* Enable all interrupts */ + __raw_writel(DAVINCI_KEYSCAN_INT_ALL, + davinci_ks->base + DAVINCI_KEYSCAN_INTENA); + + /* Clear interrupts if any */ + __raw_writel(DAVINCI_KEYSCAN_INT_ALL, + davinci_ks->base + DAVINCI_KEYSCAN_INTCLR); + + /* Setup the scan period = strobe + interval */ + __raw_writel(pdata->strobe, + davinci_ks->base + DAVINCI_KEYSCAN_STRBWIDTH); + __raw_writel(pdata->interval, + davinci_ks->base + DAVINCI_KEYSCAN_INTERVAL); + __raw_writel(0x01, + davinci_ks->base + DAVINCI_KEYSCAN_CONTTIME); + + /* Define matrix type */ + switch (pdata->matrix_type) { + case DAVINCI_KEYSCAN_MATRIX_4X4: + matrix_ctrl = 0; + break; + case DAVINCI_KEYSCAN_MATRIX_5X3: + matrix_ctrl = (1 << 6); + break; + default: + dev_err(dev->parent, "wrong matrix type\n"); + return -EINVAL; + } + + /* Enable key scan module and set matrix type */ + __raw_writel(DAVINCI_KEYSCAN_AUTODET | DAVINCI_KEYSCAN_KEYEN | + matrix_ctrl, davinci_ks->base + DAVINCI_KEYSCAN_KEYCTRL); + + return 0; +} + +static irqreturn_t davinci_ks_interrupt(int irq, void *dev_id) +{ + struct davinci_ks *davinci_ks = dev_id; + struct device *dev = &davinci_ks->input->dev; + unsigned short *keymap = davinci_ks->keymap; + int keymapsize = davinci_ks->pdata->keymapsize; + u32 prev_status, new_status, changed; + bool release; + int keycode = KEY_UNKNOWN; + int i; + + /* Disable interrupt */ + __raw_writel(0x0, davinci_ks->base + DAVINCI_KEYSCAN_INTENA); + + /* Reading previous and new status of the key scan */ + prev_status = __raw_readl(davinci_ks->base + DAVINCI_KEYSCAN_PREVSTATE); + new_status = __raw_readl(davinci_ks->base + DAVINCI_KEYSCAN_CURRENTST); + + changed = prev_status ^ new_status; + + if (changed) { + /* + * It goes through all bits in 'changed' to ensure + * that no key changes are being missed + */ + for (i = 0 ; i < keymapsize; i++) { + if ((changed>>i) & 0x1) { + keycode = keymap[i]; + release = (new_status >> i) & 0x1; + dev_dbg(dev->parent, "key %d %s\n", keycode, + release ? "released" : "pressed"); + input_report_key(davinci_ks->input, keycode, + !release); + input_sync(davinci_ks->input); + } + } + /* Clearing interrupt */ + __raw_writel(DAVINCI_KEYSCAN_INT_ALL, + davinci_ks->base + DAVINCI_KEYSCAN_INTCLR); + } + + /* Enable interrupts */ + __raw_writel(0x1, davinci_ks->base + DAVINCI_KEYSCAN_INTENA); + + return IRQ_HANDLED; +} + +static int __init davinci_ks_probe(struct platform_device *pdev) +{ + struct davinci_ks *davinci_ks; + struct input_dev *key_dev; + struct resource *res, *mem; + struct device *dev = &pdev->dev; + struct davinci_ks_platform_data *pdata = pdev->dev.platform_data; + int error, i; + + if (!pdata->keymap) { + dev_dbg(dev, "no keymap from pdata\n"); + return -EINVAL; + } + + davinci_ks = kzalloc(sizeof(struct davinci_ks) + + sizeof(unsigned short) * pdata->keymapsize, GFP_KERNEL); + if (!davinci_ks) { + dev_dbg(dev, "could not allocate memory for private data\n"); + return -ENOMEM; + } + + memcpy(davinci_ks->keymap, pdata->keymap, + sizeof(unsigned short) * pdata->keymapsize); + + key_dev = input_allocate_device(); + if (!key_dev) { + dev_dbg(dev, "could not allocate input device\n"); + error = -ENOMEM; + goto fail1; + } + + davinci_ks->input = key_dev; + + davinci_ks->irq = platform_get_irq(pdev, 0); + if (davinci_ks->irq < 0) { + dev_err(dev, "no key scan irq\n"); + error = davinci_ks->irq; + goto fail2; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "no mem resource\n"); + error = -EINVAL; + goto fail2; + } + + davinci_ks->pbase = res->start; + davinci_ks->base_size = resource_size(res); + + mem = request_mem_region(davinci_ks->pbase, davinci_ks->base_size, + pdev->name); + if (!mem) { + dev_err(dev, "key scan registers at %08x are not free\n", + davinci_ks->pbase); + error = -EBUSY; + goto fail2; + } + + davinci_ks->base = ioremap(davinci_ks->pbase, davinci_ks->base_size); + if (!davinci_ks->base) { + dev_err(dev, "can't ioremap MEM resource.\n"); + error = -ENOMEM; + goto fail3; + } + + /* Enable auto repeat feature of Linux input subsystem */ + if (pdata->rep) + __set_bit(EV_REP, key_dev->evbit); + + /* Setup input device */ + __set_bit(EV_KEY, key_dev->evbit); + + /* Setup the platform data */ + davinci_ks->pdata = pdata; + + for (i = 0; i < davinci_ks->pdata->keymapsize; i++) + __set_bit(davinci_ks->pdata->keymap[i], key_dev->keybit); + + key_dev->name = "davinci_keyscan"; + key_dev->phys = "davinci_keyscan/input0"; + key_dev->dev.parent = &pdev->dev; + key_dev->id.bustype = BUS_HOST; + key_dev->id.vendor = 0x0001; + key_dev->id.product = 0x0001; + key_dev->id.version = 0x0001; + key_dev->keycode = davinci_ks->keymap; + key_dev->keycodesize = sizeof(davinci_ks->keymap[0]); + key_dev->keycodemax = davinci_ks->pdata->keymapsize; + + error = input_register_device(davinci_ks->input); + if (error < 0) { + dev_err(dev, "unable to register davinci key scan device\n"); + goto fail4; + } + + error = request_irq(davinci_ks->irq, davinci_ks_interrupt, + IRQF_DISABLED, pdev->name, davinci_ks); + if (error < 0) { + dev_err(dev, "unable to register davinci key scan interrupt\n"); + goto fail5; + } + + error = davinci_ks_initialize(davinci_ks); + if (error < 0) { + dev_err(dev, "unable to initialize davinci key scan device\n"); + goto fail6; + } + + platform_set_drvdata(pdev, davinci_ks); + return 0; + +fail6: + free_irq(davinci_ks->irq, davinci_ks); +fail5: + input_unregister_device(davinci_ks->input); + key_dev = NULL; +fail4: + iounmap(davinci_ks->base); +fail3: + release_mem_region(davinci_ks->pbase, davinci_ks->base_size); +fail2: + input_free_device(key_dev); +fail1: + kfree(davinci_ks); + + return error; +} + +static int __devexit davinci_ks_remove(struct platform_device *pdev) +{ + struct davinci_ks *davinci_ks = platform_get_drvdata(pdev); + + free_irq(davinci_ks->irq, davinci_ks); + + input_unregister_device(davinci_ks->input); + + iounmap(davinci_ks->base); + release_mem_region(davinci_ks->pbase, davinci_ks->base_size); + + platform_set_drvdata(pdev, NULL); + + kfree(davinci_ks); + + return 0; +} + +static struct platform_driver davinci_ks_driver = { + .driver = { + .name = "davinci_keyscan", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(davinci_ks_remove), +}; + +static int __init davinci_ks_init(void) +{ + return platform_driver_probe(&davinci_ks_driver, davinci_ks_probe); +} +module_init(davinci_ks_init); + +static void __exit davinci_ks_exit(void) +{ + platform_driver_unregister(&davinci_ks_driver); +} +module_exit(davinci_ks_exit); + +MODULE_AUTHOR("Miguel Aguilar"); +MODULE_DESCRIPTION("Texas Instruments DaVinci Key Scan Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 77d13091425..1aff3b76eff 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -23,8 +23,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/workqueue.h> - -#include <asm/gpio.h> +#include <linux/gpio.h> struct gpio_button_data { struct gpio_keys_button *button; @@ -38,10 +37,8 @@ struct gpio_keys_drvdata { struct gpio_button_data data[0]; }; -static void gpio_keys_report_event(struct work_struct *work) +static void gpio_keys_report_event(struct gpio_button_data *bdata) { - struct gpio_button_data *bdata = - container_of(work, struct gpio_button_data, work); struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; @@ -51,6 +48,14 @@ static void gpio_keys_report_event(struct work_struct *work) input_sync(input); } +static void gpio_keys_work_func(struct work_struct *work) +{ + struct gpio_button_data *bdata = + container_of(work, struct gpio_button_data, work); + + gpio_keys_report_event(bdata); +} + static void gpio_keys_timer(unsigned long _data) { struct gpio_button_data *data = (struct gpio_button_data *)_data; @@ -74,10 +79,62 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id) return IRQ_HANDLED; } +static int __devinit gpio_keys_setup_key(struct device *dev, + struct gpio_button_data *bdata, + struct gpio_keys_button *button) +{ + char *desc = button->desc ? button->desc : "gpio_keys"; + int irq, error; + + setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata); + INIT_WORK(&bdata->work, gpio_keys_work_func); + + error = gpio_request(button->gpio, desc); + if (error < 0) { + dev_err(dev, "failed to request GPIO %d, error %d\n", + button->gpio, error); + goto fail2; + } + + error = gpio_direction_input(button->gpio); + if (error < 0) { + dev_err(dev, "failed to configure" + " direction for GPIO %d, error %d\n", + button->gpio, error); + goto fail3; + } + + irq = gpio_to_irq(button->gpio); + if (irq < 0) { + error = irq; + dev_err(dev, "Unable to get irq number for GPIO %d, error %d\n", + button->gpio, error); + goto fail3; + } + + error = request_irq(irq, gpio_keys_isr, + IRQF_SHARED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + desc, bdata); + if (error) { + dev_err(dev, "Unable to claim irq %d; error %d\n", + irq, error); + goto fail3; + } + + return 0; + +fail3: + gpio_free(button->gpio); +fail2: + return error; +} + static int __devinit gpio_keys_probe(struct platform_device *pdev) { struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; struct gpio_keys_drvdata *ddata; + struct device *dev = &pdev->dev; struct input_dev *input; int i, error; int wakeup = 0; @@ -87,6 +144,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) GFP_KERNEL); input = input_allocate_device(); if (!ddata || !input) { + dev_err(dev, "failed to allocate state\n"); error = -ENOMEM; goto fail1; } @@ -111,52 +169,14 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { struct gpio_keys_button *button = &pdata->buttons[i]; struct gpio_button_data *bdata = &ddata->data[i]; - int irq; unsigned int type = button->type ?: EV_KEY; bdata->input = input; bdata->button = button; - setup_timer(&bdata->timer, - gpio_keys_timer, (unsigned long)bdata); - INIT_WORK(&bdata->work, gpio_keys_report_event); - - error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); - if (error < 0) { - pr_err("gpio-keys: failed to request GPIO %d," - " error %d\n", button->gpio, error); - goto fail2; - } - - error = gpio_direction_input(button->gpio); - if (error < 0) { - pr_err("gpio-keys: failed to configure input" - " direction for GPIO %d, error %d\n", - button->gpio, error); - gpio_free(button->gpio); - goto fail2; - } - - irq = gpio_to_irq(button->gpio); - if (irq < 0) { - error = irq; - pr_err("gpio-keys: Unable to get irq number" - " for GPIO %d, error %d\n", - button->gpio, error); - gpio_free(button->gpio); - goto fail2; - } - error = request_irq(irq, gpio_keys_isr, - IRQF_SHARED | - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - button->desc ? button->desc : "gpio_keys", - bdata); - if (error) { - pr_err("gpio-keys: Unable to claim irq %d; error %d\n", - irq, error); - gpio_free(button->gpio); + error = gpio_keys_setup_key(dev, bdata, button); + if (error) goto fail2; - } if (button->wakeup) wakeup = 1; @@ -166,11 +186,16 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) error = input_register_device(input); if (error) { - pr_err("gpio-keys: Unable to register input device, " + dev_err(dev, "Unable to register input device, " "error: %d\n", error); goto fail2; } + /* get current state of buttons */ + for (i = 0; i < pdata->nbuttons; i++) + gpio_keys_report_event(&ddata->data[i]); + input_sync(input); + device_init_wakeup(&pdev->dev, wakeup); return 0; @@ -239,18 +264,21 @@ static int gpio_keys_suspend(struct device *dev) static int gpio_keys_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); + struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; int i; - if (device_may_wakeup(&pdev->dev)) { - for (i = 0; i < pdata->nbuttons; i++) { - struct gpio_keys_button *button = &pdata->buttons[i]; - if (button->wakeup) { - int irq = gpio_to_irq(button->gpio); - disable_irq_wake(irq); - } + for (i = 0; i < pdata->nbuttons; i++) { + + struct gpio_keys_button *button = &pdata->buttons[i]; + if (button->wakeup && device_may_wakeup(&pdev->dev)) { + int irq = gpio_to_irq(button->gpio); + disable_irq_wake(irq); } + + gpio_keys_report_event(&ddata->data[i]); } + input_sync(ddata->input); return 0; } diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c index f9847e0fb55..fa9bb6d235e 100644 --- a/drivers/input/keyboard/lkkbd.c +++ b/drivers/input/keyboard/lkkbd.c @@ -72,9 +72,9 @@ #define DRIVER_DESC "LK keyboard driver" -MODULE_AUTHOR ("Jan-Benedict Glaw <jbglaw@lug-owl.de>"); -MODULE_DESCRIPTION (DRIVER_DESC); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); /* * Known parameters: @@ -85,27 +85,27 @@ MODULE_LICENSE ("GPL"); * Please notice that there's not yet an API to set these at runtime. */ static int bell_volume = 100; /* % */ -module_param (bell_volume, int, 0); -MODULE_PARM_DESC (bell_volume, "Bell volume (in %). default is 100%"); +module_param(bell_volume, int, 0); +MODULE_PARM_DESC(bell_volume, "Bell volume (in %). default is 100%"); static int keyclick_volume = 100; /* % */ -module_param (keyclick_volume, int, 0); -MODULE_PARM_DESC (keyclick_volume, "Keyclick volume (in %), default is 100%"); +module_param(keyclick_volume, int, 0); +MODULE_PARM_DESC(keyclick_volume, "Keyclick volume (in %), default is 100%"); static int ctrlclick_volume = 100; /* % */ -module_param (ctrlclick_volume, int, 0); -MODULE_PARM_DESC (ctrlclick_volume, "Ctrlclick volume (in %), default is 100%"); +module_param(ctrlclick_volume, int, 0); +MODULE_PARM_DESC(ctrlclick_volume, "Ctrlclick volume (in %), default is 100%"); static int lk201_compose_is_alt; -module_param (lk201_compose_is_alt, int, 0); -MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key " - "will act as an Alt key"); +module_param(lk201_compose_is_alt, int, 0); +MODULE_PARM_DESC(lk201_compose_is_alt, + "If set non-zero, LK201' Compose key will act as an Alt key"); #undef LKKBD_DEBUG #ifdef LKKBD_DEBUG -#define DBG(x...) printk (x) +#define DBG(x...) printk(x) #else #define DBG(x...) do {} while (0) #endif @@ -122,7 +122,7 @@ MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key " #define LK_MODE_DOWN 0x80 #define LK_MODE_AUTODOWN 0x82 #define LK_MODE_UPDOWN 0x86 -#define LK_CMD_SET_MODE(mode,div) ((mode) | ((div) << 3)) +#define LK_CMD_SET_MODE(mode, div) ((mode) | ((div) << 3)) /* Misc commands */ #define LK_CMD_ENABLE_KEYCLICK 0x1b @@ -152,11 +152,8 @@ MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key " #define LK_NUM_KEYCODES 256 #define LK_NUM_IGNORE_BYTES 6 -typedef u_int16_t lk_keycode_t; - - -static lk_keycode_t lkkbd_keycode[LK_NUM_KEYCODES] = { +static unsigned short lkkbd_keycode[LK_NUM_KEYCODES] = { [0x56] = KEY_F1, [0x57] = KEY_F2, [0x58] = KEY_F3, @@ -268,7 +265,7 @@ static lk_keycode_t lkkbd_keycode[LK_NUM_KEYCODES] = { }; #define CHECK_LED(LK, VAR_ON, VAR_OFF, LED, BITS) do { \ - if (test_bit (LED, (LK)->dev->led)) \ + if (test_bit(LED, (LK)->dev->led)) \ VAR_ON |= BITS; \ else \ VAR_OFF |= BITS; \ @@ -278,7 +275,7 @@ static lk_keycode_t lkkbd_keycode[LK_NUM_KEYCODES] = { * Per-keyboard data */ struct lkkbd { - lk_keycode_t keycode[LK_NUM_KEYCODES]; + unsigned short keycode[LK_NUM_KEYCODES]; int ignore_bytes; unsigned char id[LK_NUM_IGNORE_BYTES]; struct input_dev *dev; @@ -301,26 +298,25 @@ static struct { unsigned char *name; } lk_response[] = { #define RESPONSE(x) { .value = (x), .name = #x, } - RESPONSE (LK_STUCK_KEY), - RESPONSE (LK_SELFTEST_FAILED), - RESPONSE (LK_ALL_KEYS_UP), - RESPONSE (LK_METRONOME), - RESPONSE (LK_OUTPUT_ERROR), - RESPONSE (LK_INPUT_ERROR), - RESPONSE (LK_KBD_LOCKED), - RESPONSE (LK_KBD_TEST_MODE_ACK), - RESPONSE (LK_PREFIX_KEY_DOWN), - RESPONSE (LK_MODE_CHANGE_ACK), - RESPONSE (LK_RESPONSE_RESERVED), + RESPONSE(LK_STUCK_KEY), + RESPONSE(LK_SELFTEST_FAILED), + RESPONSE(LK_ALL_KEYS_UP), + RESPONSE(LK_METRONOME), + RESPONSE(LK_OUTPUT_ERROR), + RESPONSE(LK_INPUT_ERROR), + RESPONSE(LK_KBD_LOCKED), + RESPONSE(LK_KBD_TEST_MODE_ACK), + RESPONSE(LK_PREFIX_KEY_DOWN), + RESPONSE(LK_MODE_CHANGE_ACK), + RESPONSE(LK_RESPONSE_RESERVED), #undef RESPONSE }; -static unsigned char * -response_name (unsigned char value) +static unsigned char *response_name(unsigned char value) { int i; - for (i = 0; i < ARRAY_SIZE (lk_response); i++) + for (i = 0; i < ARRAY_SIZE(lk_response); i++) if (lk_response[i].value == value) return lk_response[i].name; @@ -331,8 +327,7 @@ response_name (unsigned char value) /* * Calculate volume parameter byte for a given volume. */ -static unsigned char -volume_to_hw (int volume_percent) +static unsigned char volume_to_hw(int volume_percent) { unsigned char ret = 0; @@ -363,8 +358,7 @@ volume_to_hw (int volume_percent) return ret; } -static void -lkkbd_detection_done (struct lkkbd *lk) +static void lkkbd_detection_done(struct lkkbd *lk) { int i; @@ -377,190 +371,202 @@ lkkbd_detection_done (struct lkkbd *lk) * Print keyboard name and modify Compose=Alt on user's request. */ switch (lk->id[4]) { - case 1: - strlcpy (lk->name, "DEC LK201 keyboard", - sizeof (lk->name)); - - if (lk201_compose_is_alt) - lk->keycode[0xb1] = KEY_LEFTALT; - break; - - case 2: - strlcpy (lk->name, "DEC LK401 keyboard", - sizeof (lk->name)); - break; - - default: - strlcpy (lk->name, "Unknown DEC keyboard", - sizeof (lk->name)); - printk (KERN_ERR "lkkbd: keyboard on %s is unknown, " - "please report to Jan-Benedict Glaw " - "<jbglaw@lug-owl.de>\n", lk->phys); - printk (KERN_ERR "lkkbd: keyboard ID'ed as:"); - for (i = 0; i < LK_NUM_IGNORE_BYTES; i++) - printk (" 0x%02x", lk->id[i]); - printk ("\n"); - break; + case 1: + strlcpy(lk->name, "DEC LK201 keyboard", sizeof(lk->name)); + + if (lk201_compose_is_alt) + lk->keycode[0xb1] = KEY_LEFTALT; + break; + + case 2: + strlcpy(lk->name, "DEC LK401 keyboard", sizeof(lk->name)); + break; + + default: + strlcpy(lk->name, "Unknown DEC keyboard", sizeof(lk->name)); + printk(KERN_ERR + "lkkbd: keyboard on %s is unknown, please report to " + "Jan-Benedict Glaw <jbglaw@lug-owl.de>\n", lk->phys); + printk(KERN_ERR "lkkbd: keyboard ID'ed as:"); + for (i = 0; i < LK_NUM_IGNORE_BYTES; i++) + printk(" 0x%02x", lk->id[i]); + printk("\n"); + break; } - printk (KERN_INFO "lkkbd: keyboard on %s identified as: %s\n", - lk->phys, lk->name); + + printk(KERN_INFO "lkkbd: keyboard on %s identified as: %s\n", + lk->phys, lk->name); /* * Report errors during keyboard boot-up. */ switch (lk->id[2]) { - case 0x00: - /* All okay */ - break; - - case LK_STUCK_KEY: - printk (KERN_ERR "lkkbd: Stuck key on keyboard at " - "%s\n", lk->phys); - break; - - case LK_SELFTEST_FAILED: - printk (KERN_ERR "lkkbd: Selftest failed on keyboard " - "at %s, keyboard may not work " - "properly\n", lk->phys); - break; - - default: - printk (KERN_ERR "lkkbd: Unknown error %02x on " - "keyboard at %s\n", lk->id[2], - lk->phys); - break; + case 0x00: + /* All okay */ + break; + + case LK_STUCK_KEY: + printk(KERN_ERR "lkkbd: Stuck key on keyboard at %s\n", + lk->phys); + break; + + case LK_SELFTEST_FAILED: + printk(KERN_ERR + "lkkbd: Selftest failed on keyboard at %s, " + "keyboard may not work properly\n", lk->phys); + break; + + default: + printk(KERN_ERR + "lkkbd: Unknown error %02x on keyboard at %s\n", + lk->id[2], lk->phys); + break; } /* * Try to hint user if there's a stuck key. */ if (lk->id[2] == LK_STUCK_KEY && lk->id[3] != 0) - printk (KERN_ERR "Scancode of stuck key is 0x%02x, keycode " - "is 0x%04x\n", lk->id[3], - lk->keycode[lk->id[3]]); - - return; + printk(KERN_ERR + "Scancode of stuck key is 0x%02x, keycode is 0x%04x\n", + lk->id[3], lk->keycode[lk->id[3]]); } /* * lkkbd_interrupt() is called by the low level driver when a character * is received. */ -static irqreturn_t -lkkbd_interrupt (struct serio *serio, unsigned char data, unsigned int flags) +static irqreturn_t lkkbd_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) { - struct lkkbd *lk = serio_get_drvdata (serio); + struct lkkbd *lk = serio_get_drvdata(serio); + struct input_dev *input_dev = lk->dev; + unsigned int keycode; int i; - DBG (KERN_INFO "Got byte 0x%02x\n", data); + DBG(KERN_INFO "Got byte 0x%02x\n", data); if (lk->ignore_bytes > 0) { - DBG (KERN_INFO "Ignoring a byte on %s\n", lk->name); + DBG(KERN_INFO "Ignoring a byte on %s\n", lk->name); lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data; if (lk->ignore_bytes == 0) - lkkbd_detection_done (lk); + lkkbd_detection_done(lk); return IRQ_HANDLED; } switch (data) { - case LK_ALL_KEYS_UP: - for (i = 0; i < ARRAY_SIZE (lkkbd_keycode); i++) - if (lk->keycode[i] != KEY_RESERVED) - input_report_key (lk->dev, lk->keycode[i], 0); - input_sync (lk->dev); - break; - - case 0x01: - DBG (KERN_INFO "Got 0x01, scheduling re-initialization\n"); - lk->ignore_bytes = LK_NUM_IGNORE_BYTES; - lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data; - schedule_work (&lk->tq); - break; - - case LK_METRONOME: - case LK_OUTPUT_ERROR: - case LK_INPUT_ERROR: - case LK_KBD_LOCKED: - case LK_KBD_TEST_MODE_ACK: - case LK_PREFIX_KEY_DOWN: - case LK_MODE_CHANGE_ACK: - case LK_RESPONSE_RESERVED: - DBG (KERN_INFO "Got %s and don't know how to handle...\n", - response_name (data)); - break; - - default: - if (lk->keycode[data] != KEY_RESERVED) { - if (!test_bit (lk->keycode[data], lk->dev->key)) - input_report_key (lk->dev, lk->keycode[data], 1); - else - input_report_key (lk->dev, lk->keycode[data], 0); - input_sync (lk->dev); - } else - printk (KERN_WARNING "%s: Unknown key with " - "scancode 0x%02x on %s.\n", - __FILE__, data, lk->name); + case LK_ALL_KEYS_UP: + for (i = 0; i < ARRAY_SIZE(lkkbd_keycode); i++) + input_report_key(input_dev, lk->keycode[i], 0); + input_sync(input_dev); + break; + + case 0x01: + DBG(KERN_INFO "Got 0x01, scheduling re-initialization\n"); + lk->ignore_bytes = LK_NUM_IGNORE_BYTES; + lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data; + schedule_work(&lk->tq); + break; + + case LK_METRONOME: + case LK_OUTPUT_ERROR: + case LK_INPUT_ERROR: + case LK_KBD_LOCKED: + case LK_KBD_TEST_MODE_ACK: + case LK_PREFIX_KEY_DOWN: + case LK_MODE_CHANGE_ACK: + case LK_RESPONSE_RESERVED: + DBG(KERN_INFO "Got %s and don't know how to handle...\n", + response_name(data)); + break; + + default: + keycode = lk->keycode[data]; + if (keycode != KEY_RESERVED) { + input_report_key(input_dev, keycode, + !test_bit(keycode, input_dev->key)); + input_sync(input_dev); + } else { + printk(KERN_WARNING + "%s: Unknown key with scancode 0x%02x on %s.\n", + __FILE__, data, lk->name); + } } return IRQ_HANDLED; } +static void lkkbd_toggle_leds(struct lkkbd *lk) +{ + struct serio *serio = lk->serio; + unsigned char leds_on = 0; + unsigned char leds_off = 0; + + CHECK_LED(lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK); + CHECK_LED(lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE); + CHECK_LED(lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK); + CHECK_LED(lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT); + if (leds_on != 0) { + serio_write(serio, LK_CMD_LED_ON); + serio_write(serio, leds_on); + } + if (leds_off != 0) { + serio_write(serio, LK_CMD_LED_OFF); + serio_write(serio, leds_off); + } +} + +static void lkkbd_toggle_keyclick(struct lkkbd *lk, bool on) +{ + struct serio *serio = lk->serio; + + if (on) { + DBG("%s: Activating key clicks\n", __func__); + serio_write(serio, LK_CMD_ENABLE_KEYCLICK); + serio_write(serio, volume_to_hw(lk->keyclick_volume)); + serio_write(serio, LK_CMD_ENABLE_CTRCLICK); + serio_write(serio, volume_to_hw(lk->ctrlclick_volume)); + } else { + DBG("%s: Deactivating key clicks\n", __func__); + serio_write(serio, LK_CMD_DISABLE_KEYCLICK); + serio_write(serio, LK_CMD_DISABLE_CTRCLICK); + } + +} + /* * lkkbd_event() handles events from the input module. */ -static int -lkkbd_event (struct input_dev *dev, unsigned int type, unsigned int code, - int value) +static int lkkbd_event(struct input_dev *dev, + unsigned int type, unsigned int code, int value) { - struct lkkbd *lk = input_get_drvdata (dev); - unsigned char leds_on = 0; - unsigned char leds_off = 0; + struct lkkbd *lk = input_get_drvdata(dev); switch (type) { - case EV_LED: - CHECK_LED (lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK); - CHECK_LED (lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE); - CHECK_LED (lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK); - CHECK_LED (lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT); - if (leds_on != 0) { - serio_write (lk->serio, LK_CMD_LED_ON); - serio_write (lk->serio, leds_on); - } - if (leds_off != 0) { - serio_write (lk->serio, LK_CMD_LED_OFF); - serio_write (lk->serio, leds_off); - } + case EV_LED: + lkkbd_toggle_leds(lk); + return 0; + + case EV_SND: + switch (code) { + case SND_CLICK: + lkkbd_toggle_keyclick(lk, value); return 0; - case EV_SND: - switch (code) { - case SND_CLICK: - if (value == 0) { - DBG ("%s: Deactivating key clicks\n", __func__); - serio_write (lk->serio, LK_CMD_DISABLE_KEYCLICK); - serio_write (lk->serio, LK_CMD_DISABLE_CTRCLICK); - } else { - DBG ("%s: Activating key clicks\n", __func__); - serio_write (lk->serio, LK_CMD_ENABLE_KEYCLICK); - serio_write (lk->serio, volume_to_hw (lk->keyclick_volume)); - serio_write (lk->serio, LK_CMD_ENABLE_CTRCLICK); - serio_write (lk->serio, volume_to_hw (lk->ctrlclick_volume)); - } - return 0; - - case SND_BELL: - if (value != 0) - serio_write (lk->serio, LK_CMD_SOUND_BELL); - - return 0; - } - break; - - default: - printk (KERN_ERR "%s (): Got unknown type %d, code %d, value %d\n", - __func__, type, code, value); + case SND_BELL: + if (value != 0) + serio_write(lk->serio, LK_CMD_SOUND_BELL); + + return 0; + } + + break; + + default: + printk(KERN_ERR "%s(): Got unknown type %d, code %d, value %d\n", + __func__, type, code, value); } return -1; @@ -570,79 +576,56 @@ lkkbd_event (struct input_dev *dev, unsigned int type, unsigned int code, * lkkbd_reinit() sets leds and beeps to a state the computer remembers they * were in. */ -static void -lkkbd_reinit (struct work_struct *work) +static void lkkbd_reinit(struct work_struct *work) { struct lkkbd *lk = container_of(work, struct lkkbd, tq); int division; - unsigned char leds_on = 0; - unsigned char leds_off = 0; /* Ask for ID */ - serio_write (lk->serio, LK_CMD_REQUEST_ID); + serio_write(lk->serio, LK_CMD_REQUEST_ID); /* Reset parameters */ - serio_write (lk->serio, LK_CMD_SET_DEFAULTS); + serio_write(lk->serio, LK_CMD_SET_DEFAULTS); /* Set LEDs */ - CHECK_LED (lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK); - CHECK_LED (lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE); - CHECK_LED (lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK); - CHECK_LED (lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT); - if (leds_on != 0) { - serio_write (lk->serio, LK_CMD_LED_ON); - serio_write (lk->serio, leds_on); - } - if (leds_off != 0) { - serio_write (lk->serio, LK_CMD_LED_OFF); - serio_write (lk->serio, leds_off); - } + lkkbd_toggle_leds(lk); /* * Try to activate extended LK401 mode. This command will * only work with a LK401 keyboard and grants access to * LAlt, RAlt, RCompose and RShift. */ - serio_write (lk->serio, LK_CMD_ENABLE_LK401); + serio_write(lk->serio, LK_CMD_ENABLE_LK401); /* Set all keys to UPDOWN mode */ for (division = 1; division <= 14; division++) - serio_write (lk->serio, LK_CMD_SET_MODE (LK_MODE_UPDOWN, - division)); + serio_write(lk->serio, + LK_CMD_SET_MODE(LK_MODE_UPDOWN, division)); /* Enable bell and set volume */ - serio_write (lk->serio, LK_CMD_ENABLE_BELL); - serio_write (lk->serio, volume_to_hw (lk->bell_volume)); + serio_write(lk->serio, LK_CMD_ENABLE_BELL); + serio_write(lk->serio, volume_to_hw(lk->bell_volume)); /* Enable/disable keyclick (and possibly set volume) */ - if (test_bit (SND_CLICK, lk->dev->snd)) { - serio_write (lk->serio, LK_CMD_ENABLE_KEYCLICK); - serio_write (lk->serio, volume_to_hw (lk->keyclick_volume)); - serio_write (lk->serio, LK_CMD_ENABLE_CTRCLICK); - serio_write (lk->serio, volume_to_hw (lk->ctrlclick_volume)); - } else { - serio_write (lk->serio, LK_CMD_DISABLE_KEYCLICK); - serio_write (lk->serio, LK_CMD_DISABLE_CTRCLICK); - } + lkkbd_toggle_keyclick(lk, test_bit(SND_CLICK, lk->dev->snd)); /* Sound the bell if needed */ - if (test_bit (SND_BELL, lk->dev->snd)) - serio_write (lk->serio, LK_CMD_SOUND_BELL); + if (test_bit(SND_BELL, lk->dev->snd)) + serio_write(lk->serio, LK_CMD_SOUND_BELL); } /* * lkkbd_connect() probes for a LK keyboard and fills the necessary structures. */ -static int -lkkbd_connect (struct serio *serio, struct serio_driver *drv) +static int lkkbd_connect(struct serio *serio, struct serio_driver *drv) { struct lkkbd *lk; struct input_dev *input_dev; int i; int err; - lk = kzalloc (sizeof (struct lkkbd), GFP_KERNEL); - input_dev = input_allocate_device (); + lk = kzalloc(sizeof(struct lkkbd), GFP_KERNEL); + input_dev = input_allocate_device(); if (!lk || !input_dev) { err = -ENOMEM; goto fail1; @@ -650,14 +633,14 @@ lkkbd_connect (struct serio *serio, struct serio_driver *drv) lk->serio = serio; lk->dev = input_dev; - INIT_WORK (&lk->tq, lkkbd_reinit); + INIT_WORK(&lk->tq, lkkbd_reinit); lk->bell_volume = bell_volume; lk->keyclick_volume = keyclick_volume; lk->ctrlclick_volume = ctrlclick_volume; - memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES); + memcpy(lk->keycode, lkkbd_keycode, sizeof(lk->keycode)); - strlcpy (lk->name, "DEC LK keyboard", sizeof(lk->name)); - snprintf (lk->phys, sizeof(lk->phys), "%s/input0", serio->phys); + strlcpy(lk->name, "DEC LK keyboard", sizeof(lk->name)); + snprintf(lk->phys, sizeof(lk->phys), "%s/input0", serio->phys); input_dev->name = lk->name; input_dev->phys = lk->phys; @@ -668,62 +651,61 @@ lkkbd_connect (struct serio *serio, struct serio_driver *drv) input_dev->dev.parent = &serio->dev; input_dev->event = lkkbd_event; - input_set_drvdata (input_dev, lk); + input_set_drvdata(input_dev, lk); - set_bit (EV_KEY, input_dev->evbit); - set_bit (EV_LED, input_dev->evbit); - set_bit (EV_SND, input_dev->evbit); - set_bit (EV_REP, input_dev->evbit); - set_bit (LED_CAPSL, input_dev->ledbit); - set_bit (LED_SLEEP, input_dev->ledbit); - set_bit (LED_COMPOSE, input_dev->ledbit); - set_bit (LED_SCROLLL, input_dev->ledbit); - set_bit (SND_BELL, input_dev->sndbit); - set_bit (SND_CLICK, input_dev->sndbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(EV_LED, input_dev->evbit); + __set_bit(EV_SND, input_dev->evbit); + __set_bit(EV_REP, input_dev->evbit); + __set_bit(LED_CAPSL, input_dev->ledbit); + __set_bit(LED_SLEEP, input_dev->ledbit); + __set_bit(LED_COMPOSE, input_dev->ledbit); + __set_bit(LED_SCROLLL, input_dev->ledbit); + __set_bit(SND_BELL, input_dev->sndbit); + __set_bit(SND_CLICK, input_dev->sndbit); input_dev->keycode = lk->keycode; - input_dev->keycodesize = sizeof (lk_keycode_t); - input_dev->keycodemax = LK_NUM_KEYCODES; + input_dev->keycodesize = sizeof(lk->keycode[0]); + input_dev->keycodemax = ARRAY_SIZE(lk->keycode); for (i = 0; i < LK_NUM_KEYCODES; i++) - __set_bit (lk->keycode[i], input_dev->keybit); + __set_bit(lk->keycode[i], input_dev->keybit); __clear_bit(KEY_RESERVED, input_dev->keybit); - serio_set_drvdata (serio, lk); + serio_set_drvdata(serio, lk); - err = serio_open (serio, drv); + err = serio_open(serio, drv); if (err) goto fail2; - err = input_register_device (lk->dev); + err = input_register_device(lk->dev); if (err) goto fail3; - serio_write (lk->serio, LK_CMD_POWERCYCLE_RESET); + serio_write(lk->serio, LK_CMD_POWERCYCLE_RESET); return 0; - fail3: serio_close (serio); - fail2: serio_set_drvdata (serio, NULL); - fail1: input_free_device (input_dev); - kfree (lk); + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(lk); return err; } /* * lkkbd_disconnect() unregisters and closes behind us. */ -static void -lkkbd_disconnect (struct serio *serio) +static void lkkbd_disconnect(struct serio *serio) { - struct lkkbd *lk = serio_get_drvdata (serio); - - input_get_device (lk->dev); - input_unregister_device (lk->dev); - serio_close (serio); - serio_set_drvdata (serio, NULL); - input_put_device (lk->dev); - kfree (lk); + struct lkkbd *lk = serio_get_drvdata(serio); + + input_get_device(lk->dev); + input_unregister_device(lk->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(lk->dev); + kfree(lk); } static struct serio_device_id lkkbd_serio_ids[] = { @@ -752,18 +734,16 @@ static struct serio_driver lkkbd_drv = { /* * The functions for insering/removing us as a module. */ -static int __init -lkkbd_init (void) +static int __init lkkbd_init(void) { return serio_register_driver(&lkkbd_drv); } -static void __exit -lkkbd_exit (void) +static void __exit lkkbd_exit(void) { serio_unregister_driver(&lkkbd_drv); } -module_init (lkkbd_init); -module_exit (lkkbd_exit); +module_init(lkkbd_init); +module_exit(lkkbd_exit); diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index 91cfe517026..34f4a29d497 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -213,8 +213,9 @@ static void matrix_keypad_stop(struct input_dev *dev) } #ifdef CONFIG_PM -static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state) +static int matrix_keypad_suspend(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct matrix_keypad *keypad = platform_get_drvdata(pdev); const struct matrix_keypad_platform_data *pdata = keypad->pdata; int i; @@ -228,8 +229,9 @@ static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t stat return 0; } -static int matrix_keypad_resume(struct platform_device *pdev) +static int matrix_keypad_resume(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct matrix_keypad *keypad = platform_get_drvdata(pdev); const struct matrix_keypad_platform_data *pdata = keypad->pdata; int i; @@ -242,9 +244,9 @@ static int matrix_keypad_resume(struct platform_device *pdev) return 0; } -#else -#define matrix_keypad_suspend NULL -#define matrix_keypad_resume NULL + +static const SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops, + matrix_keypad_suspend, matrix_keypad_resume); #endif static int __devinit init_matrix_gpio(struct platform_device *pdev, @@ -417,11 +419,12 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev) static struct platform_driver matrix_keypad_driver = { .probe = matrix_keypad_probe, .remove = __devexit_p(matrix_keypad_remove), - .suspend = matrix_keypad_suspend, - .resume = matrix_keypad_resume, .driver = { .name = "matrix-keypad", .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &matrix_keypad_pm_ops, +#endif }, }; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index a9bb2544b2d..16ec5233441 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -80,6 +80,7 @@ config INPUT_WISTRON_BTNS tristate "x86 Wistron laptop button interface" depends on X86 && !X86_64 select INPUT_POLLDEV + select INPUT_SPARSEKMAP select NEW_LEDS select LEDS_CLASS select CHECK_SIGNATURE @@ -281,6 +282,7 @@ config INPUT_RB532_BUTTON config INPUT_DM355EVM tristate "TI DaVinci DM355 EVM Keypad and IR Remote" depends on MFD_DM355EVM_MSP + select INPUT_SPARSEKMAP help Supports the pushbuttons and IR remote used with the DM355 EVM board. diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c index e290fde35e7..614b65d78fe 100644 --- a/drivers/input/misc/ati_remote.c +++ b/drivers/input/misc/ati_remote.c @@ -766,7 +766,7 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de ati_remote->interface = interface; usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys)); - strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys)); + strlcat(ati_remote->phys, "/input0", sizeof(ati_remote->phys)); if (udev->manufacturer) strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name)); diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c index f2b67dc81d8..766c06911f4 100644 --- a/drivers/input/misc/dm355evm_keys.c +++ b/drivers/input/misc/dm355evm_keys.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> +#include <linux/input/sparse-keymap.h> #include <linux/platform_device.h> #include <linux/interrupt.h> @@ -33,12 +34,8 @@ struct dm355evm_keys { int irq; }; -/* These initial keycodes can be remapped by dm355evm_setkeycode(). */ -static struct { - u16 event; - u16 keycode; -} dm355evm_keys[] = { - +/* These initial keycodes can be remapped */ +static const struct key_entry dm355evm_keys[] = { /* * Pushbuttons on the EVM board ... note that the labels for these * are SW10/SW11/etc on the PC board. The left/right orientation @@ -47,11 +44,11 @@ static struct { * is to the right. (That is, rotate the board counter-clockwise * by 90 degrees from the SW10/etc and "DM355 EVM" labels.) */ - { 0x00d8, KEY_OK, }, /* SW12 */ - { 0x00b8, KEY_UP, }, /* SW13 */ - { 0x00e8, KEY_DOWN, }, /* SW11 */ - { 0x0078, KEY_LEFT, }, /* SW14 */ - { 0x00f0, KEY_RIGHT, }, /* SW10 */ + { KE_KEY, 0x00d8, { KEY_OK } }, /* SW12 */ + { KE_KEY, 0x00b8, { KEY_UP } }, /* SW13 */ + { KE_KEY, 0x00e8, { KEY_DOWN } }, /* SW11 */ + { KE_KEY, 0x0078, { KEY_LEFT } }, /* SW14 */ + { KE_KEY, 0x00f0, { KEY_RIGHT } }, /* SW10 */ /* * IR buttons ... codes assigned to match the universal remote @@ -65,35 +62,35 @@ static struct { * RC5 codes are 14 bits, with two start bits (0x3 prefix) * and a toggle bit (masked out below). */ - { 0x300c, KEY_POWER, }, /* NOTE: docs omit this */ - { 0x3000, KEY_NUMERIC_0, }, - { 0x3001, KEY_NUMERIC_1, }, - { 0x3002, KEY_NUMERIC_2, }, - { 0x3003, KEY_NUMERIC_3, }, - { 0x3004, KEY_NUMERIC_4, }, - { 0x3005, KEY_NUMERIC_5, }, - { 0x3006, KEY_NUMERIC_6, }, - { 0x3007, KEY_NUMERIC_7, }, - { 0x3008, KEY_NUMERIC_8, }, - { 0x3009, KEY_NUMERIC_9, }, - { 0x3022, KEY_ENTER, }, - { 0x30ec, KEY_MODE, }, /* "tv/vcr/..." */ - { 0x300f, KEY_SELECT, }, /* "info" */ - { 0x3020, KEY_CHANNELUP, }, /* "up" */ - { 0x302e, KEY_MENU, }, /* "in/out" */ - { 0x3011, KEY_VOLUMEDOWN, }, /* "left" */ - { 0x300d, KEY_MUTE, }, /* "ok" */ - { 0x3010, KEY_VOLUMEUP, }, /* "right" */ - { 0x301e, KEY_SUBTITLE, }, /* "cc" */ - { 0x3021, KEY_CHANNELDOWN, }, /* "down" */ - { 0x3022, KEY_PREVIOUS, }, - { 0x3026, KEY_SLEEP, }, - { 0x3172, KEY_REWIND, }, /* NOTE: docs wrongly say 0x30ca */ - { 0x3175, KEY_PLAY, }, - { 0x3174, KEY_FASTFORWARD, }, - { 0x3177, KEY_RECORD, }, - { 0x3176, KEY_STOP, }, - { 0x3169, KEY_PAUSE, }, + { KE_KEY, 0x300c, { KEY_POWER } }, /* NOTE: docs omit this */ + { KE_KEY, 0x3000, { KEY_NUMERIC_0 } }, + { KE_KEY, 0x3001, { KEY_NUMERIC_1 } }, + { KE_KEY, 0x3002, { KEY_NUMERIC_2 } }, + { KE_KEY, 0x3003, { KEY_NUMERIC_3 } }, + { KE_KEY, 0x3004, { KEY_NUMERIC_4 } }, + { KE_KEY, 0x3005, { KEY_NUMERIC_5 } }, + { KE_KEY, 0x3006, { KEY_NUMERIC_6 } }, + { KE_KEY, 0x3007, { KEY_NUMERIC_7 } }, + { KE_KEY, 0x3008, { KEY_NUMERIC_8 } }, + { KE_KEY, 0x3009, { KEY_NUMERIC_9 } }, + { KE_KEY, 0x3022, { KEY_ENTER } }, + { KE_KEY, 0x30ec, { KEY_MODE } }, /* "tv/vcr/..." */ + { KE_KEY, 0x300f, { KEY_SELECT } }, /* "info" */ + { KE_KEY, 0x3020, { KEY_CHANNELUP } }, /* "up" */ + { KE_KEY, 0x302e, { KEY_MENU } }, /* "in/out" */ + { KE_KEY, 0x3011, { KEY_VOLUMEDOWN } }, /* "left" */ + { KE_KEY, 0x300d, { KEY_MUTE } }, /* "ok" */ + { KE_KEY, 0x3010, { KEY_VOLUMEUP } }, /* "right" */ + { KE_KEY, 0x301e, { KEY_SUBTITLE } }, /* "cc" */ + { KE_KEY, 0x3021, { KEY_CHANNELDOWN } },/* "down" */ + { KE_KEY, 0x3022, { KEY_PREVIOUS } }, + { KE_KEY, 0x3026, { KEY_SLEEP } }, + { KE_KEY, 0x3172, { KEY_REWIND } }, /* NOTE: docs wrongly say 0x30ca */ + { KE_KEY, 0x3175, { KEY_PLAY } }, + { KE_KEY, 0x3174, { KEY_FASTFORWARD } }, + { KE_KEY, 0x3177, { KEY_RECORD } }, + { KE_KEY, 0x3176, { KEY_STOP } }, + { KE_KEY, 0x3169, { KEY_PAUSE } }, }; /* @@ -105,19 +102,18 @@ static struct { */ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys) { - struct dm355evm_keys *keys = _keys; - int status; + static u16 last_event; + struct dm355evm_keys *keys = _keys; + const struct key_entry *ke; + unsigned int keycode; + int status; + u16 event; /* For simplicity we ignore INPUT_COUNT and just read * events until we get the "queue empty" indicator. * Reading INPUT_LOW decrements the count. */ for (;;) { - static u16 last_event; - u16 event; - int keycode; - int i; - status = dm355evm_msp_read(DM355EVM_MSP_INPUT_HIGH); if (status < 0) { dev_dbg(keys->dev, "input high err %d\n", @@ -156,14 +152,9 @@ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys) /* ignore the RC5 toggle bit */ event &= ~0x0800; - /* find the key, or leave it as unknown */ - keycode = KEY_UNKNOWN; - for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) { - if (dm355evm_keys[i].event != event) - continue; - keycode = dm355evm_keys[i].keycode; - break; - } + /* find the key, or report it as unknown */ + ke = sparse_keymap_entry_from_scancode(keys->input, event); + keycode = ke ? ke->keycode : KEY_UNKNOWN; dev_dbg(keys->dev, "input event 0x%04x--> keycode %d\n", event, keycode); @@ -174,36 +165,8 @@ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys) input_report_key(keys->input, keycode, 0); input_sync(keys->input); } - return IRQ_HANDLED; -} -static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode) -{ - u16 old_keycode; - unsigned i; - - if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys)) - return -EINVAL; - - old_keycode = dm355evm_keys[index].keycode; - dm355evm_keys[index].keycode = keycode; - set_bit(keycode, dev->keybit); - - for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) { - if (dm355evm_keys[index].keycode == old_keycode) - goto done; - } - clear_bit(old_keycode, dev->keybit); -done: - return 0; -} - -static int dm355evm_getkeycode(struct input_dev *dev, int index, int *keycode) -{ - if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys)) - return -EINVAL; - - return dm355evm_keys[index].keycode; + return IRQ_HANDLED; } /*----------------------------------------------------------------------*/ @@ -213,7 +176,6 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev) struct dm355evm_keys *keys; struct input_dev *input; int status; - int i; /* allocate instance struct and input dev */ keys = kzalloc(sizeof *keys, GFP_KERNEL); @@ -242,31 +204,30 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev) input->id.product = 0x0355; input->id.version = dm355evm_msp_read(DM355EVM_MSP_FIRMREV); - input->evbit[0] = BIT(EV_KEY); - for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) - __set_bit(dm355evm_keys[i].keycode, input->keybit); - - input->setkeycode = dm355evm_setkeycode; - input->getkeycode = dm355evm_getkeycode; + status = sparse_keymap_setup(input, dm355evm_keys, NULL); + if (status) + goto fail1; /* REVISIT: flush the event queue? */ status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq, IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys); if (status < 0) - goto fail1; + goto fail2; /* register */ status = input_register_device(input); if (status < 0) - goto fail2; + goto fail3; platform_set_drvdata(pdev, keys); return 0; -fail2: +fail3: free_irq(keys->irq, keys); +fail2: + sparse_keymap_free(input); fail1: input_free_device(input); kfree(keys); @@ -280,6 +241,7 @@ static int __devexit dm355evm_keys_remove(struct platform_device *pdev) struct dm355evm_keys *keys = platform_get_drvdata(pdev); free_irq(keys->irq, keys); + sparse_keymap_free(keys->input); input_unregister_device(keys->input); kfree(keys); diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c index a53c4885fba..668913d1204 100644 --- a/drivers/input/misc/powermate.c +++ b/drivers/input/misc/powermate.c @@ -338,7 +338,7 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i pm->input = input_dev; usb_make_path(udev, pm->phys, sizeof(pm->phys)); - strlcpy(pm->phys, "/input0", sizeof(pm->phys)); + strlcat(pm->phys, "/input0", sizeof(pm->phys)); spin_lock_init(&pm->lock); diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index a932179c4c9..38da6ab0438 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -21,6 +21,7 @@ #include <linux/dmi.h> #include <linux/init.h> #include <linux/input-polldev.h> +#include <linux/input/sparse-keymap.h> #include <linux/interrupt.h> #include <linux/jiffies.h> #include <linux/kernel.h> @@ -224,19 +225,8 @@ static void bios_set_state(u8 subsys, int enable) /* Hardware database */ -struct key_entry { - char type; /* See KE_* below */ - u8 code; - union { - u16 keycode; /* For KE_KEY */ - struct { /* For KE_SW */ - u8 code; - u8 value; - } sw; - }; -}; - -enum { KE_END, KE_KEY, KE_SW, KE_WIFI, KE_BLUETOOTH }; +#define KE_WIFI (KE_LAST + 1) +#define KE_BLUETOOTH (KE_LAST + 2) #define FE_MAIL_LED 0x01 #define FE_WIFI_LED 0x02 @@ -644,10 +634,10 @@ static struct key_entry keymap_prestigio[] __initdata = { * a list of buttons and their key codes (reported when loading this module * with force=1) and the output of dmidecode to $MODULE_AUTHOR. */ -static struct dmi_system_id dmi_ids[] __initdata = { +static const struct dmi_system_id __initconst dmi_ids[] = { { + /* Fujitsu-Siemens Amilo Pro V2000 */ .callback = dmi_matched, - .ident = "Fujitsu-Siemens Amilo Pro V2000", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2000"), @@ -655,8 +645,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_fs_amilo_pro_v2000 }, { + /* Fujitsu-Siemens Amilo Pro Edition V3505 */ .callback = dmi_matched, - .ident = "Fujitsu-Siemens Amilo Pro Edition V3505", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro Edition V3505"), @@ -664,8 +654,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_fs_amilo_pro_v3505 }, { + /* Fujitsu-Siemens Amilo M7400 */ .callback = dmi_matched, - .ident = "Fujitsu-Siemens Amilo M7400", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO M "), @@ -673,8 +663,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_fs_amilo_pro_v2000 }, { + /* Maxdata Pro 7000 DX */ .callback = dmi_matched, - .ident = "Maxdata Pro 7000 DX", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MAXDATA"), DMI_MATCH(DMI_PRODUCT_NAME, "Pro 7000"), @@ -682,8 +672,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_fs_amilo_pro_v2000 }, { + /* Fujitsu N3510 */ .callback = dmi_matched, - .ident = "Fujitsu N3510", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), DMI_MATCH(DMI_PRODUCT_NAME, "N3510"), @@ -691,8 +681,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_fujitsu_n3510 }, { + /* Acer Aspire 1500 */ .callback = dmi_matched, - .ident = "Acer Aspire 1500", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1500"), @@ -700,8 +690,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_aspire_1500 }, { + /* Acer Aspire 1600 */ .callback = dmi_matched, - .ident = "Acer Aspire 1600", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1600"), @@ -709,8 +699,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_aspire_1600 }, { + /* Acer Aspire 3020 */ .callback = dmi_matched, - .ident = "Acer Aspire 3020", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3020"), @@ -718,8 +708,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_aspire_5020 }, { + /* Acer Aspire 5020 */ .callback = dmi_matched, - .ident = "Acer Aspire 5020", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5020"), @@ -727,8 +717,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_aspire_5020 }, { + /* Acer TravelMate 2100 */ .callback = dmi_matched, - .ident = "Acer TravelMate 2100", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2100"), @@ -736,8 +726,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_aspire_5020 }, { + /* Acer TravelMate 2410 */ .callback = dmi_matched, - .ident = "Acer TravelMate 2410", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2410"), @@ -745,8 +735,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_2410 }, { + /* Acer TravelMate C300 */ .callback = dmi_matched, - .ident = "Acer TravelMate C300", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate C300"), @@ -754,8 +744,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_300 }, { + /* Acer TravelMate C100 */ .callback = dmi_matched, - .ident = "Acer TravelMate C100", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate C100"), @@ -763,8 +753,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_300 }, { + /* Acer TravelMate C110 */ .callback = dmi_matched, - .ident = "Acer TravelMate C110", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate C110"), @@ -772,8 +762,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_110 }, { + /* Acer TravelMate 380 */ .callback = dmi_matched, - .ident = "Acer TravelMate 380", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 380"), @@ -781,8 +771,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_380 }, { + /* Acer TravelMate 370 */ .callback = dmi_matched, - .ident = "Acer TravelMate 370", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 370"), @@ -790,8 +780,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_380 /* keyboard minus 1 key */ }, { + /* Acer TravelMate 220 */ .callback = dmi_matched, - .ident = "Acer TravelMate 220", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 220"), @@ -799,8 +789,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_220 }, { + /* Acer TravelMate 260 */ .callback = dmi_matched, - .ident = "Acer TravelMate 260", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 260"), @@ -808,8 +798,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_220 }, { + /* Acer TravelMate 230 */ .callback = dmi_matched, - .ident = "Acer TravelMate 230", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 230"), @@ -818,8 +808,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_230 }, { + /* Acer TravelMate 280 */ .callback = dmi_matched, - .ident = "Acer TravelMate 280", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 280"), @@ -827,8 +817,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_230 }, { + /* Acer TravelMate 240 */ .callback = dmi_matched, - .ident = "Acer TravelMate 240", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 240"), @@ -836,8 +826,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_240 }, { + /* Acer TravelMate 250 */ .callback = dmi_matched, - .ident = "Acer TravelMate 250", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 250"), @@ -845,8 +835,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_240 }, { + /* Acer TravelMate 2424NWXCi */ .callback = dmi_matched, - .ident = "Acer TravelMate 2424NWXCi", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2420"), @@ -854,8 +844,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_240 }, { + /* Acer TravelMate 350 */ .callback = dmi_matched, - .ident = "Acer TravelMate 350", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 350"), @@ -863,8 +853,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_350 }, { + /* Acer TravelMate 360 */ .callback = dmi_matched, - .ident = "Acer TravelMate 360", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), @@ -872,8 +862,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_360 }, { + /* Acer TravelMate 610 */ .callback = dmi_matched, - .ident = "Acer TravelMate 610", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ACER"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 610"), @@ -881,8 +871,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_610 }, { + /* Acer TravelMate 620 */ .callback = dmi_matched, - .ident = "Acer TravelMate 620", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 620"), @@ -890,8 +880,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_630 }, { + /* Acer TravelMate 630 */ .callback = dmi_matched, - .ident = "Acer TravelMate 630", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 630"), @@ -899,8 +889,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_acer_travelmate_630 }, { + /* AOpen 1559AS */ .callback = dmi_matched, - .ident = "AOpen 1559AS", .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "E2U"), DMI_MATCH(DMI_BOARD_NAME, "E2U"), @@ -908,8 +898,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_aopen_1559as }, { + /* Medion MD 9783 */ .callback = dmi_matched, - .ident = "Medion MD 9783", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"), DMI_MATCH(DMI_PRODUCT_NAME, "MD 9783"), @@ -917,8 +907,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_wistron_ms2111 }, { + /* Medion MD 40100 */ .callback = dmi_matched, - .ident = "Medion MD 40100", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"), DMI_MATCH(DMI_PRODUCT_NAME, "WID2000"), @@ -926,8 +916,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_wistron_md40100 }, { + /* Medion MD 2900 */ .callback = dmi_matched, - .ident = "Medion MD 2900", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"), DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2000"), @@ -935,8 +925,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_wistron_md2900 }, { + /* Medion MD 42200 */ .callback = dmi_matched, - .ident = "Medion MD 42200", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Medion"), DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2030"), @@ -944,8 +934,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_fs_amilo_pro_v2000 }, { + /* Medion MD 96500 */ .callback = dmi_matched, - .ident = "Medion MD 96500", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MEDIONPC"), DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2040"), @@ -953,8 +943,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_wistron_md96500 }, { + /* Medion MD 95400 */ .callback = dmi_matched, - .ident = "Medion MD 95400", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MEDIONPC"), DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2050"), @@ -962,8 +952,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_wistron_md96500 }, { + /* Fujitsu Siemens Amilo D7820 */ .callback = dmi_matched, - .ident = "Fujitsu Siemens Amilo D7820", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), /* not sure */ DMI_MATCH(DMI_PRODUCT_NAME, "Amilo D"), @@ -971,8 +961,8 @@ static struct dmi_system_id dmi_ids[] __initdata = { .driver_data = keymap_fs_amilo_d88x0 }, { + /* Fujitsu Siemens Amilo D88x0 */ .callback = dmi_matched, - .ident = "Fujitsu Siemens Amilo D88x0", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO D"), @@ -1037,21 +1027,6 @@ static unsigned long jiffies_last_press; static bool wifi_enabled; static bool bluetooth_enabled; -static void report_key(struct input_dev *dev, unsigned int keycode) -{ - input_report_key(dev, keycode, 1); - input_sync(dev); - input_report_key(dev, keycode, 0); - input_sync(dev); -} - -static void report_switch(struct input_dev *dev, unsigned int code, int value) -{ - input_report_switch(dev, code, value); - input_sync(dev); -} - - /* led management */ static void wistron_mail_led_set(struct led_classdev *led_cdev, enum led_brightness value) @@ -1128,43 +1103,13 @@ static inline void wistron_led_resume(void) led_classdev_resume(&wistron_wifi_led); } -static struct key_entry *wistron_get_entry_by_scancode(int code) -{ - struct key_entry *key; - - for (key = keymap; key->type != KE_END; key++) - if (code == key->code) - return key; - - return NULL; -} - -static struct key_entry *wistron_get_entry_by_keycode(int keycode) -{ - struct key_entry *key; - - for (key = keymap; key->type != KE_END; key++) - if (key->type == KE_KEY && keycode == key->keycode) - return key; - - return NULL; -} - static void handle_key(u8 code) { - const struct key_entry *key = wistron_get_entry_by_scancode(code); + const struct key_entry *key = + sparse_keymap_entry_from_scancode(wistron_idev->input, code); if (key) { switch (key->type) { - case KE_KEY: - report_key(wistron_idev->input, key->keycode); - break; - - case KE_SW: - report_switch(wistron_idev->input, - key->sw.code, key->sw.value); - break; - case KE_WIFI: if (have_wifi) { wifi_enabled = !wifi_enabled; @@ -1180,7 +1125,9 @@ static void handle_key(u8 code) break; default: - BUG(); + sparse_keymap_report_entry(wistron_idev->input, + key, 1, true); + break; } jiffies_last_press = jiffies; } else @@ -1220,42 +1167,39 @@ static void wistron_poll(struct input_polled_dev *dev) dev->poll_interval = POLL_INTERVAL_DEFAULT; } -static int wistron_getkeycode(struct input_dev *dev, int scancode, int *keycode) +static int __devinit wistron_setup_keymap(struct input_dev *dev, + struct key_entry *entry) { - const struct key_entry *key = wistron_get_entry_by_scancode(scancode); + switch (entry->type) { - if (key && key->type == KE_KEY) { - *keycode = key->keycode; - return 0; - } - - return -EINVAL; -} + /* if wifi or bluetooth are not available, create normal keys */ + case KE_WIFI: + if (!have_wifi) { + entry->type = KE_KEY; + entry->keycode = KEY_WLAN; + } + break; -static int wistron_setkeycode(struct input_dev *dev, int scancode, int keycode) -{ - struct key_entry *key; - int old_keycode; - - if (keycode < 0 || keycode > KEY_MAX) - return -EINVAL; - - key = wistron_get_entry_by_scancode(scancode); - if (key && key->type == KE_KEY) { - old_keycode = key->keycode; - key->keycode = keycode; - set_bit(keycode, dev->keybit); - if (!wistron_get_entry_by_keycode(old_keycode)) - clear_bit(old_keycode, dev->keybit); - return 0; + case KE_BLUETOOTH: + if (!have_bluetooth) { + entry->type = KE_KEY; + entry->keycode = KEY_BLUETOOTH; + } + break; + + case KE_END: + if (entry->code & FE_UNTESTED) + printk(KERN_WARNING "Untested laptop multimedia keys, " + "please report success or failure to " + "eric.piel@tremplin-utc.net\n"); + break; } - return -EINVAL; + return 0; } static int __devinit setup_input_dev(void) { - struct key_entry *key; struct input_dev *input_dev; int error; @@ -1263,7 +1207,7 @@ static int __devinit setup_input_dev(void) if (!wistron_idev) return -ENOMEM; - wistron_idev->flush = wistron_flush; + wistron_idev->open = wistron_flush; wistron_idev->poll = wistron_poll; wistron_idev->poll_interval = POLL_INTERVAL_DEFAULT; @@ -1273,56 +1217,21 @@ static int __devinit setup_input_dev(void) input_dev->id.bustype = BUS_HOST; input_dev->dev.parent = &wistron_device->dev; - input_dev->getkeycode = wistron_getkeycode; - input_dev->setkeycode = wistron_setkeycode; - - for (key = keymap; key->type != KE_END; key++) { - switch (key->type) { - case KE_KEY: - set_bit(EV_KEY, input_dev->evbit); - set_bit(key->keycode, input_dev->keybit); - break; - - case KE_SW: - set_bit(EV_SW, input_dev->evbit); - set_bit(key->sw.code, input_dev->swbit); - break; - - /* if wifi or bluetooth are not available, create normal keys */ - case KE_WIFI: - if (!have_wifi) { - key->type = KE_KEY; - key->keycode = KEY_WLAN; - key--; - } - break; - - case KE_BLUETOOTH: - if (!have_bluetooth) { - key->type = KE_KEY; - key->keycode = KEY_BLUETOOTH; - key--; - } - break; - - default: - break; - } - } - - /* reads information flags on KE_END */ - if (key->code & FE_UNTESTED) - printk(KERN_WARNING "Untested laptop multimedia keys, " - "please report success or failure to eric.piel" - "@tremplin-utc.net\n"); + error = sparse_keymap_setup(input_dev, keymap, wistron_setup_keymap); + if (error) + goto err_free_dev; error = input_register_polled_device(wistron_idev); - if (error) { - input_free_polled_device(wistron_idev); - return error; - } + if (error) + goto err_free_keymap; return 0; + + err_free_keymap: + sparse_keymap_free(input_dev); + err_free_dev: + input_free_polled_device(wistron_idev); + return error; } /* Driver core */ @@ -1371,6 +1280,7 @@ static int __devexit wistron_remove(struct platform_device *dev) { wistron_led_remove(); input_unregister_polled_device(wistron_idev); + sparse_keymap_free(wistron_idev->input); input_free_polled_device(wistron_idev); bios_detach(); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index f36110689aa..a3f492a5085 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -28,13 +28,16 @@ #define dbg(format, arg...) do {} while (0) #endif -#define ALPS_DUALPOINT 0x01 -#define ALPS_WHEEL 0x02 -#define ALPS_FW_BK_1 0x04 -#define ALPS_4BTN 0x08 -#define ALPS_OLDPROTO 0x10 -#define ALPS_PASS 0x20 -#define ALPS_FW_BK_2 0x40 + +#define ALPS_OLDPROTO 0x01 /* old style input */ +#define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */ +#define ALPS_PASS 0x04 /* device has a pass-through port */ + +#define ALPS_WHEEL 0x08 /* hardware wheel present */ +#define ALPS_FW_BK_1 0x10 /* front & back buttons present */ +#define ALPS_FW_BK_2 0x20 /* front & back buttons present */ +#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */ + static const struct alps_model_info alps_model_data[] = { { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ @@ -56,7 +59,7 @@ static const struct alps_model_info alps_model_data[] = { { { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, { { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */ { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude E6500 */ - { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FW_BK_1 }, /* Dell Vostro 1400 */ + { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ }; /* @@ -83,6 +86,7 @@ static const struct alps_model_info alps_model_data[] = { static void alps_process_packet(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; + const struct alps_model_info *model = priv->i; unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; struct input_dev *dev2 = priv->dev2; @@ -101,7 +105,7 @@ static void alps_process_packet(struct psmouse *psmouse) return; } - if (priv->i->flags & ALPS_OLDPROTO) { + if (model->flags & ALPS_OLDPROTO) { left = packet[2] & 0x10; right = packet[2] & 0x08; middle = 0; @@ -117,12 +121,12 @@ static void alps_process_packet(struct psmouse *psmouse) z = packet[5]; } - if (priv->i->flags & ALPS_FW_BK_1) { + if (model->flags & ALPS_FW_BK_1) { back = packet[0] & 0x10; forward = packet[2] & 4; } - if (priv->i->flags & ALPS_FW_BK_2) { + if (model->flags & ALPS_FW_BK_2) { back = packet[3] & 4; forward = packet[2] & 4; if ((middle = forward && back)) @@ -132,7 +136,7 @@ static void alps_process_packet(struct psmouse *psmouse) ges = packet[2] & 1; fin = packet[2] & 2; - if ((priv->i->flags & ALPS_DUALPOINT) && z == 127) { + if ((model->flags & ALPS_DUALPOINT) && z == 127) { input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x)); input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y)); @@ -150,7 +154,8 @@ static void alps_process_packet(struct psmouse *psmouse) input_report_key(dev, BTN_MIDDLE, middle); /* Convert hardware tap to a reasonable Z value */ - if (ges && !fin) z = 40; + if (ges && !fin) + z = 40; /* * A "tap and drag" operation is reported by the hardware as a transition @@ -166,8 +171,10 @@ static void alps_process_packet(struct psmouse *psmouse) } priv->prev_fin = fin; - if (z > 30) input_report_key(dev, BTN_TOUCH, 1); - if (z < 25) input_report_key(dev, BTN_TOUCH, 0); + if (z > 30) + input_report_key(dev, BTN_TOUCH, 1); + if (z < 25) + input_report_key(dev, BTN_TOUCH, 0); if (z > 0) { input_report_abs(dev, ABS_X, x); @@ -177,14 +184,21 @@ static void alps_process_packet(struct psmouse *psmouse) input_report_abs(dev, ABS_PRESSURE, z); input_report_key(dev, BTN_TOOL_FINGER, z > 0); - if (priv->i->flags & ALPS_WHEEL) + if (model->flags & ALPS_WHEEL) input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07)); - if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { + if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { input_report_key(dev, BTN_FORWARD, forward); input_report_key(dev, BTN_BACK, back); } + if (model->flags & ALPS_FOUR_BUTTONS) { + input_report_key(dev, BTN_0, packet[2] & 4); + input_report_key(dev, BTN_1, packet[0] & 0x10); + input_report_key(dev, BTN_2, packet[3] & 4); + input_report_key(dev, BTN_3, packet[0] & 0x20); + } + input_sync(dev); } @@ -393,15 +407,12 @@ static int alps_poll(struct psmouse *psmouse) return 0; } -static int alps_hw_init(struct psmouse *psmouse, int *version) +static int alps_hw_init(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; + const struct alps_model_info *model = priv->i; - priv->i = alps_get_model(psmouse, version); - if (!priv->i) - return -1; - - if ((priv->i->flags & ALPS_PASS) && + if ((model->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, true)) { return -1; } @@ -416,7 +427,7 @@ static int alps_hw_init(struct psmouse *psmouse, int *version) return -1; } - if ((priv->i->flags & ALPS_PASS) && + if ((model->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, false)) { return -1; } @@ -432,12 +443,15 @@ static int alps_hw_init(struct psmouse *psmouse, int *version) static int alps_reconnect(struct psmouse *psmouse) { + const struct alps_model_info *model; + psmouse_reset(psmouse); - if (alps_hw_init(psmouse, NULL)) + model = alps_get_model(psmouse, NULL); + if (!model) return -1; - return 0; + return alps_hw_init(psmouse); } static void alps_disconnect(struct psmouse *psmouse) @@ -452,6 +466,7 @@ static void alps_disconnect(struct psmouse *psmouse) int alps_init(struct psmouse *psmouse) { struct alps_data *priv; + const struct alps_model_info *model; struct input_dev *dev1 = psmouse->dev, *dev2; int version; @@ -463,33 +478,48 @@ int alps_init(struct psmouse *psmouse) priv->dev2 = dev2; psmouse->private = priv; - if (alps_hw_init(psmouse, &version)) + model = alps_get_model(psmouse, &version); + if (!model) + goto init_fail; + + priv->i = model; + + if (alps_hw_init(psmouse)) goto init_fail; dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY); dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH); dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER); - dev1->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | - BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); + dev1->keybit[BIT_WORD(BTN_LEFT)] |= + BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS); input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); - if (priv->i->flags & ALPS_WHEEL) { + if (model->flags & ALPS_WHEEL) { dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL); dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL); } - if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { + if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD); dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK); } + if (model->flags & ALPS_FOUR_BUTTONS) { + dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0); + dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1); + dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2); + dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3); + } else { + dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE); + } + snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys); dev2->phys = priv->phys; - dev2->name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse"; + dev2->name = (model->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse"; dev2->id.bustype = BUS_I8042; dev2->id.vendor = 0x0002; dev2->id.product = PSMOUSE_ALPS; @@ -497,9 +527,9 @@ int alps_init(struct psmouse *psmouse) dev2->dev.parent = &psmouse->ps2dev.serio->dev; dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); - dev2->relbit[BIT_WORD(REL_X)] |= BIT_MASK(REL_X) | BIT_MASK(REL_Y); - dev2->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | - BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); + dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); + dev2->keybit[BIT_WORD(BTN_LEFT)] = + BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); if (input_register_device(priv->dev2)) goto init_fail; diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index fda35e615ab..b27684f267b 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -420,6 +420,7 @@ static void elantech_set_input_params(struct psmouse *psmouse) __set_bit(EV_KEY, dev->evbit); __set_bit(EV_ABS, dev->evbit); + __clear_bit(EV_REL, dev->evbit); __set_bit(BTN_LEFT, dev->keybit); __set_bit(BTN_RIGHT, dev->keybit); diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index de1e553028b..b146237266d 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -430,19 +430,6 @@ static int hgpk_register(struct psmouse *psmouse) struct input_dev *dev = psmouse->dev; int err; - /* unset the things that psmouse-base sets which we don't have */ - __clear_bit(BTN_MIDDLE, dev->keybit); - - /* set the things we do have */ - __set_bit(EV_KEY, dev->evbit); - __set_bit(EV_REL, dev->evbit); - - __set_bit(REL_X, dev->relbit); - __set_bit(REL_Y, dev->relbit); - - __set_bit(BTN_LEFT, dev->keybit); - __set_bit(BTN_RIGHT, dev->keybit); - /* register handlers */ psmouse->protocol_handler = hgpk_process_byte; psmouse->poll = hgpk_poll; diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 82811558ec3..2e6bdfea016 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -25,11 +25,13 @@ struct lifebook_data { char phys[32]; }; +static bool lifebook_present; + static const char *desired_serio_phys; -static int lifebook_set_serio_phys(const struct dmi_system_id *d) +static int lifebook_limit_serio3(const struct dmi_system_id *d) { - desired_serio_phys = d->driver_data; + desired_serio_phys = "isa0060/serio3"; return 0; } @@ -41,53 +43,53 @@ static int lifebook_set_6byte_proto(const struct dmi_system_id *d) return 0; } -static const struct dmi_system_id lifebook_dmi_table[] = { +static const struct dmi_system_id __initconst lifebook_dmi_table[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) { - .ident = "FLORA-ie 55mi", + /* FLORA-ie 55mi */ .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "FLORA-ie 55mi"), }, }, { - .ident = "LifeBook B", + /* LifeBook B */ .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"), }, }, { - .ident = "Lifebook B", + /* Lifebook B */ .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"), }, }, { - .ident = "Lifebook B-2130", + /* Lifebook B-2130 */ .matches = { DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"), }, }, { - .ident = "Lifebook B213x/B2150", + /* Lifebook B213x/B2150 */ .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"), }, }, { - .ident = "Zephyr", + /* Zephyr */ .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"), }, }, { - .ident = "CF-18", + /* Panasonic CF-18 */ .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"), }, - .callback = lifebook_set_serio_phys, - .driver_data = "isa0060/serio3", + .callback = lifebook_limit_serio3, }, { - .ident = "Panasonic CF-28", + /* Panasonic CF-28 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"), DMI_MATCH(DMI_PRODUCT_NAME, "CF-28"), @@ -95,7 +97,7 @@ static const struct dmi_system_id lifebook_dmi_table[] = { .callback = lifebook_set_6byte_proto, }, { - .ident = "Panasonic CF-29", + /* Panasonic CF-29 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"), DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"), @@ -103,21 +105,27 @@ static const struct dmi_system_id lifebook_dmi_table[] = { .callback = lifebook_set_6byte_proto, }, { - .ident = "CF-72", + /* Panasonic CF-72 */ .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "CF-72"), }, .callback = lifebook_set_6byte_proto, }, { - .ident = "Lifebook B142", + /* Lifebook B142 */ .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"), }, }, { } +#endif }; +void __init lifebook_module_init(void) +{ + lifebook_present = dmi_check_system(lifebook_dmi_table); +} + static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse) { struct lifebook_data *priv = psmouse->private; @@ -198,10 +206,10 @@ static int lifebook_absolute_mode(struct psmouse *psmouse) return -1; /* - Enable absolute output -- ps2_command fails always but if - you leave this call out the touchsreen will never send - absolute coordinates - */ + * Enable absolute output -- ps2_command fails always but if + * you leave this call out the touchsreen will never send + * absolute coordinates + */ param = lifebook_use_6byte_proto ? 0x08 : 0x07; ps2_command(ps2dev, ¶m, PSMOUSE_CMD_SETRES); @@ -243,7 +251,7 @@ static void lifebook_disconnect(struct psmouse *psmouse) int lifebook_detect(struct psmouse *psmouse, bool set_properties) { - if (!dmi_check_system(lifebook_dmi_table)) + if (!lifebook_present) return -1; if (desired_serio_phys && @@ -283,8 +291,8 @@ static int lifebook_create_relative_device(struct psmouse *psmouse) dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); - dev2->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) | - BIT_MASK(BTN_RIGHT); + dev2->keybit[BIT_WORD(BTN_LEFT)] = + BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); error = input_register_device(priv->dev2); if (error) @@ -309,6 +317,7 @@ int lifebook_init(struct psmouse *psmouse) dev1->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); dev1->relbit[0] = 0; + dev1->keybit[BIT_WORD(BTN_MOUSE)] = 0; dev1->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(dev1, ABS_X, 0, max_coord, 0, 0); input_set_abs_params(dev1, ABS_Y, 0, max_coord, 0, 0); diff --git a/drivers/input/mouse/lifebook.h b/drivers/input/mouse/lifebook.h index 407cb226bc0..4c4326c6f50 100644 --- a/drivers/input/mouse/lifebook.h +++ b/drivers/input/mouse/lifebook.h @@ -12,9 +12,13 @@ #define _LIFEBOOK_H #ifdef CONFIG_MOUSE_PS2_LIFEBOOK +void lifebook_module_init(void); int lifebook_detect(struct psmouse *psmouse, bool set_properties); int lifebook_init(struct psmouse *psmouse); #else +inline void lifebook_module_init(void) +{ +} inline int lifebook_detect(struct psmouse *psmouse, bool set_properties) { return -ENOSYS; diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c index ab5dc5f5fd8..543c240a85f 100644 --- a/drivers/input/mouse/logips2pp.c +++ b/drivers/input/mouse/logips2pp.c @@ -404,8 +404,8 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties) } } - if (buttons < 3) - __clear_bit(BTN_MIDDLE, psmouse->dev->keybit); + if (buttons >= 3) + __set_bit(BTN_MIDDLE, psmouse->dev->keybit); if (model_info) ps2pp_set_model_properties(psmouse, model_info, use_ps2pp); diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 07c53798301..fd0bc094616 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -425,6 +425,7 @@ static int genius_detect(struct psmouse *psmouse, bool set_properties) return -1; if (set_properties) { + __set_bit(BTN_MIDDLE, psmouse->dev->keybit); __set_bit(BTN_EXTRA, psmouse->dev->keybit); __set_bit(BTN_SIDE, psmouse->dev->keybit); __set_bit(REL_WHEEL, psmouse->dev->relbit); @@ -460,8 +461,10 @@ static int intellimouse_detect(struct psmouse *psmouse, bool set_properties) __set_bit(BTN_MIDDLE, psmouse->dev->keybit); __set_bit(REL_WHEEL, psmouse->dev->relbit); - if (!psmouse->vendor) psmouse->vendor = "Generic"; - if (!psmouse->name) psmouse->name = "Wheel Mouse"; + if (!psmouse->vendor) + psmouse->vendor = "Generic"; + if (!psmouse->name) + psmouse->name = "Wheel Mouse"; psmouse->pktsize = 4; } @@ -504,8 +507,10 @@ static int im_explorer_detect(struct psmouse *psmouse, bool set_properties) __set_bit(BTN_SIDE, psmouse->dev->keybit); __set_bit(BTN_EXTRA, psmouse->dev->keybit); - if (!psmouse->vendor) psmouse->vendor = "Generic"; - if (!psmouse->name) psmouse->name = "Explorer Mouse"; + if (!psmouse->vendor) + psmouse->vendor = "Generic"; + if (!psmouse->name) + psmouse->name = "Explorer Mouse"; psmouse->pktsize = 4; } @@ -536,6 +541,7 @@ static int thinking_detect(struct psmouse *psmouse, bool set_properties) return -1; if (set_properties) { + __set_bit(BTN_MIDDLE, psmouse->dev->keybit); __set_bit(BTN_EXTRA, psmouse->dev->keybit); psmouse->vendor = "Kensington"; @@ -551,8 +557,16 @@ static int thinking_detect(struct psmouse *psmouse, bool set_properties) static int ps2bare_detect(struct psmouse *psmouse, bool set_properties) { if (set_properties) { - if (!psmouse->vendor) psmouse->vendor = "Generic"; - if (!psmouse->name) psmouse->name = "Mouse"; + if (!psmouse->vendor) + psmouse->vendor = "Generic"; + if (!psmouse->name) + psmouse->name = "Mouse"; + +/* + * We have no way of figuring true number of buttons so let's + * assume that the device has 3. + */ + __set_bit(BTN_MIDDLE, psmouse->dev->keybit); } return 0; @@ -567,6 +581,8 @@ static int cortron_detect(struct psmouse *psmouse, bool set_properties) if (set_properties) { psmouse->vendor = "Cortron"; psmouse->name = "PS/2 Trackball"; + + __set_bit(BTN_MIDDLE, psmouse->dev->keybit); __set_bit(BTN_SIDE, psmouse->dev->keybit); } @@ -1184,15 +1200,16 @@ static void psmouse_disconnect(struct serio *serio) mutex_unlock(&psmouse_mutex); } -static int psmouse_switch_protocol(struct psmouse *psmouse, const struct psmouse_protocol *proto) +static int psmouse_switch_protocol(struct psmouse *psmouse, + const struct psmouse_protocol *proto) { struct input_dev *input_dev = psmouse->dev; input_dev->dev.parent = &psmouse->ps2dev.serio->dev; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); - input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | - BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); + input_dev->keybit[BIT_WORD(BTN_MOUSE)] = + BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); psmouse->set_rate = psmouse_set_rate; @@ -1209,8 +1226,7 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, const struct psmouse return -1; psmouse->type = proto->type; - } - else + } else psmouse->type = psmouse_extensions(psmouse, psmouse_max_proto, true); @@ -1680,6 +1696,9 @@ static int __init psmouse_init(void) { int err; + lifebook_module_init(); + synaptics_module_init(); + kpsmoused_wq = create_singlethread_workqueue("kpsmoused"); if (!kpsmoused_wq) { printk(KERN_ERR "psmouse: failed to create kpsmoused workqueue\n"); diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index f84cbd97c88..77b9fd0b3fb 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -836,6 +836,7 @@ int fsp_init(struct psmouse *psmouse) priv->flags |= FSPDRV_FLAG_EN_OPC; /* Set up various supported input event bits */ + __set_bit(BTN_MIDDLE, psmouse->dev->keybit); __set_bit(BTN_BACK, psmouse->dev->keybit); __set_bit(BTN_FORWARD, psmouse->dev->keybit); __set_bit(REL_WHEEL, psmouse->dev->relbit); diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index f4a61252bcc..05689e73219 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -24,6 +24,7 @@ */ #include <linux/module.h> +#include <linux/dmi.h> #include <linux/input.h> #include <linux/serio.h> #include <linux/libps2.h> @@ -629,25 +630,26 @@ static int synaptics_reconnect(struct psmouse *psmouse) return 0; } -#if defined(__i386__) -#include <linux/dmi.h> -static const struct dmi_system_id toshiba_dmi_table[] = { +static bool impaired_toshiba_kbc; + +static const struct dmi_system_id __initconst toshiba_dmi_table[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) { - .ident = "Toshiba Satellite", + /* Toshiba Satellite */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"), }, }, { - .ident = "Toshiba Dynabook", + /* Toshiba Dynabook */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), DMI_MATCH(DMI_PRODUCT_NAME, "dynabook"), }, }, { - .ident = "Toshiba Portege M300", + /* Toshiba Portege M300 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M300"), @@ -655,7 +657,7 @@ static const struct dmi_system_id toshiba_dmi_table[] = { }, { - .ident = "Toshiba Portege M300", + /* Toshiba Portege M300 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), DMI_MATCH(DMI_PRODUCT_NAME, "Portable PC"), @@ -664,8 +666,13 @@ static const struct dmi_system_id toshiba_dmi_table[] = { }, { } -}; #endif +}; + +void __init synaptics_module_init(void) +{ + impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table); +} int synaptics_init(struct psmouse *psmouse) { @@ -718,18 +725,16 @@ int synaptics_init(struct psmouse *psmouse) if (SYN_CAP_PASS_THROUGH(priv->capabilities)) synaptics_pt_create(psmouse); -#if defined(__i386__) /* * Toshiba's KBC seems to have trouble handling data from * Synaptics as full rate, switch to lower rate which is roughly * thye same as rate of standard PS/2 mouse. */ - if (psmouse->rate >= 80 && dmi_check_system(toshiba_dmi_table)) { + if (psmouse->rate >= 80 && impaired_toshiba_kbc) { printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n", dmi_get_system_info(DMI_PRODUCT_NAME)); psmouse->rate = 40; } -#endif return 0; @@ -740,6 +745,10 @@ int synaptics_init(struct psmouse *psmouse) #else /* CONFIG_MOUSE_PS2_SYNAPTICS */ +void __init synaptics_module_init(void) +{ +} + int synaptics_init(struct psmouse *psmouse) { return -ENOSYS; diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 871f6fe377f..838e7f2c9b3 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -105,6 +105,7 @@ struct synaptics_data { int scroll; }; +void synaptics_module_init(void); int synaptics_detect(struct psmouse *psmouse, bool set_properties); int synaptics_init(struct psmouse *psmouse); void synaptics_reset(struct psmouse *psmouse); diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index 7283c78044a..9867dfe2a63 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -420,8 +420,8 @@ static void synaptics_i2c_check_params(struct synaptics_i2c *touch) } /* Control the Device polling rate / Work Handler sleep time */ -unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch, - bool have_data) +static unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch, + bool have_data) { unsigned long delay, nodata_count_thres; @@ -520,7 +520,7 @@ static void synaptics_i2c_set_input_params(struct synaptics_i2c *touch) __set_bit(BTN_LEFT, input->keybit); } -struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client) +static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client) { struct synaptics_i2c *touch; diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c index 0308a0faa94..909431c31ab 100644 --- a/drivers/input/mouse/touchkit_ps2.c +++ b/drivers/input/mouse/touchkit_ps2.c @@ -86,7 +86,8 @@ int touchkit_ps2_detect(struct psmouse *psmouse, bool set_properties) if (set_properties) { dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - __set_bit(BTN_TOUCH, dev->keybit); + dev->keybit[BIT_WORD(BTN_MOUSE)] = 0; + dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(dev, ABS_X, 0, TOUCHKIT_MAX_XC, 0, 0); input_set_abs_params(dev, ABS_Y, 0, TOUCHKIT_MAX_YC, 0, 0); diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index e354362f297..63d4a67830f 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -284,7 +284,6 @@ static int trackpoint_reconnect(struct psmouse *psmouse) int trackpoint_detect(struct psmouse *psmouse, bool set_properties) { - struct trackpoint_data *priv; struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char firmware_id; unsigned char button_info; @@ -301,8 +300,8 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) button_info = 0; } - psmouse->private = priv = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL); - if (!priv) + psmouse->private = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL); + if (!psmouse->private) return -1; psmouse->vendor = "IBM"; @@ -311,7 +310,10 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) psmouse->reconnect = trackpoint_reconnect; psmouse->disconnect = trackpoint_disconnect; - trackpoint_defaults(priv); + if ((button_info & 0x0f) >= 3) + __set_bit(BTN_MIDDLE, psmouse->dev->keybit); + + trackpoint_defaults(psmouse->private); trackpoint_sync(psmouse); error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group); @@ -319,7 +321,8 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) printk(KERN_ERR "trackpoint.c: failed to create sysfs attributes, error: %d\n", error); - kfree(priv); + kfree(psmouse->private); + psmouse->private = NULL; return -1; } diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c index 70111443678..bf2c0c80d6c 100644 --- a/drivers/input/mouse/vsxxxaa.c +++ b/drivers/input/mouse/vsxxxaa.c @@ -86,27 +86,28 @@ #define DRIVER_DESC "Driver for DEC VSXXX-AA and -GA mice and VSXXX-AB tablet" -MODULE_AUTHOR ("Jan-Benedict Glaw <jbglaw@lug-owl.de>"); -MODULE_DESCRIPTION (DRIVER_DESC); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); #undef VSXXXAA_DEBUG #ifdef VSXXXAA_DEBUG -#define DBG(x...) printk (x) +#define DBG(x...) printk(x) #else #define DBG(x...) do {} while (0) #endif #define VSXXXAA_INTRO_MASK 0x80 #define VSXXXAA_INTRO_HEAD 0x80 -#define IS_HDR_BYTE(x) (((x) & VSXXXAA_INTRO_MASK) \ - == VSXXXAA_INTRO_HEAD) +#define IS_HDR_BYTE(x) \ + (((x) & VSXXXAA_INTRO_MASK) == VSXXXAA_INTRO_HEAD) #define VSXXXAA_PACKET_MASK 0xe0 #define VSXXXAA_PACKET_REL 0x80 #define VSXXXAA_PACKET_ABS 0xc0 #define VSXXXAA_PACKET_POR 0xa0 -#define MATCH_PACKET_TYPE(data, type) (((data) & VSXXXAA_PACKET_MASK) == (type)) +#define MATCH_PACKET_TYPE(data, type) \ + (((data) & VSXXXAA_PACKET_MASK) == (type)) @@ -123,52 +124,50 @@ struct vsxxxaa { char phys[32]; }; -static void -vsxxxaa_drop_bytes (struct vsxxxaa *mouse, int num) +static void vsxxxaa_drop_bytes(struct vsxxxaa *mouse, int num) { - if (num >= mouse->count) + if (num >= mouse->count) { mouse->count = 0; - else { - memmove (mouse->buf, mouse->buf + num - 1, BUFLEN - num); + } else { + memmove(mouse->buf, mouse->buf + num - 1, BUFLEN - num); mouse->count -= num; } } -static void -vsxxxaa_queue_byte (struct vsxxxaa *mouse, unsigned char byte) +static void vsxxxaa_queue_byte(struct vsxxxaa *mouse, unsigned char byte) { if (mouse->count == BUFLEN) { - printk (KERN_ERR "%s on %s: Dropping a byte of full buffer.\n", - mouse->name, mouse->phys); - vsxxxaa_drop_bytes (mouse, 1); + printk(KERN_ERR "%s on %s: Dropping a byte of full buffer.\n", + mouse->name, mouse->phys); + vsxxxaa_drop_bytes(mouse, 1); } - DBG (KERN_INFO "Queueing byte 0x%02x\n", byte); + + DBG(KERN_INFO "Queueing byte 0x%02x\n", byte); mouse->buf[mouse->count++] = byte; } -static void -vsxxxaa_detection_done (struct vsxxxaa *mouse) +static void vsxxxaa_detection_done(struct vsxxxaa *mouse) { switch (mouse->type) { - case 0x02: - strlcpy (mouse->name, "DEC VSXXX-AA/-GA mouse", - sizeof (mouse->name)); - break; - - case 0x04: - strlcpy (mouse->name, "DEC VSXXX-AB digitizer", - sizeof (mouse->name)); - break; - - default: - snprintf (mouse->name, sizeof (mouse->name), - "unknown DEC pointer device (type = 0x%02x)", - mouse->type); - break; + case 0x02: + strlcpy(mouse->name, "DEC VSXXX-AA/-GA mouse", + sizeof(mouse->name)); + break; + + case 0x04: + strlcpy(mouse->name, "DEC VSXXX-AB digitizer", + sizeof(mouse->name)); + break; + + default: + snprintf(mouse->name, sizeof(mouse->name), + "unknown DEC pointer device (type = 0x%02x)", + mouse->type); + break; } - printk (KERN_INFO + printk(KERN_INFO "Found %s version 0x%02x from country 0x%02x on port %s\n", mouse->name, mouse->version, mouse->country, mouse->phys); } @@ -176,42 +175,38 @@ vsxxxaa_detection_done (struct vsxxxaa *mouse) /* * Returns number of bytes to be dropped, 0 if packet is okay. */ -static int -vsxxxaa_check_packet (struct vsxxxaa *mouse, int packet_len) +static int vsxxxaa_check_packet(struct vsxxxaa *mouse, int packet_len) { int i; /* First byte must be a header byte */ - if (!IS_HDR_BYTE (mouse->buf[0])) { - DBG ("vsck: len=%d, 1st=0x%02x\n", packet_len, mouse->buf[0]); + if (!IS_HDR_BYTE(mouse->buf[0])) { + DBG("vsck: len=%d, 1st=0x%02x\n", packet_len, mouse->buf[0]); return 1; } /* Check all following bytes */ - if (packet_len > 1) { - for (i = 1; i < packet_len; i++) { - if (IS_HDR_BYTE (mouse->buf[i])) { - printk (KERN_ERR "Need to drop %d bytes " - "of a broken packet.\n", - i - 1); - DBG (KERN_INFO "check: len=%d, b[%d]=0x%02x\n", - packet_len, i, mouse->buf[i]); - return i - 1; - } + for (i = 1; i < packet_len; i++) { + if (IS_HDR_BYTE(mouse->buf[i])) { + printk(KERN_ERR + "Need to drop %d bytes of a broken packet.\n", + i - 1); + DBG(KERN_INFO "check: len=%d, b[%d]=0x%02x\n", + packet_len, i, mouse->buf[i]); + return i - 1; } } return 0; } -static __inline__ int -vsxxxaa_smells_like_packet (struct vsxxxaa *mouse, unsigned char type, size_t len) +static inline int vsxxxaa_smells_like_packet(struct vsxxxaa *mouse, + unsigned char type, size_t len) { - return (mouse->count >= len) && MATCH_PACKET_TYPE (mouse->buf[0], type); + return mouse->count >= len && MATCH_PACKET_TYPE(mouse->buf[0], type); } -static void -vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse) +static void vsxxxaa_handle_REL_packet(struct vsxxxaa *mouse) { struct input_dev *dev = mouse->dev; unsigned char *buf = mouse->buf; @@ -232,43 +227,42 @@ vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse) * 0, bit 4 of byte 0 is direction. */ dx = buf[1] & 0x7f; - dx *= ((buf[0] >> 4) & 0x01)? 1: -1; + dx *= ((buf[0] >> 4) & 0x01) ? 1 : -1; /* * Low 7 bit of byte 2 are abs(dy), bit 7 is * 0, bit 3 of byte 0 is direction. */ dy = buf[2] & 0x7f; - dy *= ((buf[0] >> 3) & 0x01)? -1: 1; + dy *= ((buf[0] >> 3) & 0x01) ? -1 : 1; /* * Get button state. It's the low three bits * (for three buttons) of byte 0. */ - left = (buf[0] & 0x04)? 1: 0; - middle = (buf[0] & 0x02)? 1: 0; - right = (buf[0] & 0x01)? 1: 0; + left = buf[0] & 0x04; + middle = buf[0] & 0x02; + right = buf[0] & 0x01; - vsxxxaa_drop_bytes (mouse, 3); + vsxxxaa_drop_bytes(mouse, 3); - DBG (KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n", - mouse->name, mouse->phys, dx, dy, - left? "L": "l", middle? "M": "m", right? "R": "r"); + DBG(KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n", + mouse->name, mouse->phys, dx, dy, + left ? "L" : "l", middle ? "M" : "m", right ? "R" : "r"); /* * Report what we've found so far... */ - input_report_key (dev, BTN_LEFT, left); - input_report_key (dev, BTN_MIDDLE, middle); - input_report_key (dev, BTN_RIGHT, right); - input_report_key (dev, BTN_TOUCH, 0); - input_report_rel (dev, REL_X, dx); - input_report_rel (dev, REL_Y, dy); - input_sync (dev); + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_MIDDLE, middle); + input_report_key(dev, BTN_RIGHT, right); + input_report_key(dev, BTN_TOUCH, 0); + input_report_rel(dev, REL_X, dx); + input_report_rel(dev, REL_Y, dy); + input_sync(dev); } -static void -vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse) +static void vsxxxaa_handle_ABS_packet(struct vsxxxaa *mouse) { struct input_dev *dev = mouse->dev; unsigned char *buf = mouse->buf; @@ -296,32 +290,31 @@ vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse) /* * Get button state. It's bits <4..1> of byte 0. */ - left = (buf[0] & 0x02)? 1: 0; - middle = (buf[0] & 0x04)? 1: 0; - right = (buf[0] & 0x08)? 1: 0; - touch = (buf[0] & 0x10)? 1: 0; + left = buf[0] & 0x02; + middle = buf[0] & 0x04; + right = buf[0] & 0x08; + touch = buf[0] & 0x10; - vsxxxaa_drop_bytes (mouse, 5); + vsxxxaa_drop_bytes(mouse, 5); - DBG (KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n", - mouse->name, mouse->phys, x, y, - left? "L": "l", middle? "M": "m", - right? "R": "r", touch? "T": "t"); + DBG(KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n", + mouse->name, mouse->phys, x, y, + left ? "L" : "l", middle ? "M" : "m", + right ? "R" : "r", touch ? "T" : "t"); /* * Report what we've found so far... */ - input_report_key (dev, BTN_LEFT, left); - input_report_key (dev, BTN_MIDDLE, middle); - input_report_key (dev, BTN_RIGHT, right); - input_report_key (dev, BTN_TOUCH, touch); - input_report_abs (dev, ABS_X, x); - input_report_abs (dev, ABS_Y, y); - input_sync (dev); + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_MIDDLE, middle); + input_report_key(dev, BTN_RIGHT, right); + input_report_key(dev, BTN_TOUCH, touch); + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + input_sync(dev); } -static void -vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse) +static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse) { struct input_dev *dev = mouse->dev; unsigned char *buf = mouse->buf; @@ -356,24 +349,24 @@ vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse) * (for three buttons) of byte 0. Maybe even the bit <3> * has some meaning if a tablet is attached. */ - left = (buf[0] & 0x04)? 1: 0; - middle = (buf[0] & 0x02)? 1: 0; - right = (buf[0] & 0x01)? 1: 0; + left = buf[0] & 0x04; + middle = buf[0] & 0x02; + right = buf[0] & 0x01; - vsxxxaa_drop_bytes (mouse, 4); - vsxxxaa_detection_done (mouse); + vsxxxaa_drop_bytes(mouse, 4); + vsxxxaa_detection_done(mouse); if (error <= 0x1f) { /* No (serious) error. Report buttons */ - input_report_key (dev, BTN_LEFT, left); - input_report_key (dev, BTN_MIDDLE, middle); - input_report_key (dev, BTN_RIGHT, right); - input_report_key (dev, BTN_TOUCH, 0); - input_sync (dev); + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_MIDDLE, middle); + input_report_key(dev, BTN_RIGHT, right); + input_report_key(dev, BTN_TOUCH, 0); + input_sync(dev); if (error != 0) - printk (KERN_INFO "Your %s on %s reports error=0x%02x\n", - mouse->name, mouse->phys, error); + printk(KERN_INFO "Your %s on %s reports error=0x%02x\n", + mouse->name, mouse->phys, error); } @@ -381,18 +374,18 @@ vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse) * If the mouse was hot-plugged, we need to force differential mode * now... However, give it a second to recover from it's reset. */ - printk (KERN_NOTICE "%s on %s: Forceing standard packet format, " - "incremental streaming mode and 72 samples/sec\n", - mouse->name, mouse->phys); - serio_write (mouse->serio, 'S'); /* Standard format */ - mdelay (50); - serio_write (mouse->serio, 'R'); /* Incremental */ - mdelay (50); - serio_write (mouse->serio, 'L'); /* 72 samples/sec */ + printk(KERN_NOTICE + "%s on %s: Forcing standard packet format, " + "incremental streaming mode and 72 samples/sec\n", + mouse->name, mouse->phys); + serio_write(mouse->serio, 'S'); /* Standard format */ + mdelay(50); + serio_write(mouse->serio, 'R'); /* Incremental */ + mdelay(50); + serio_write(mouse->serio, 'L'); /* 72 samples/sec */ } -static void -vsxxxaa_parse_buffer (struct vsxxxaa *mouse) +static void vsxxxaa_parse_buffer(struct vsxxxaa *mouse) { unsigned char *buf = mouse->buf; int stray_bytes; @@ -409,122 +402,107 @@ vsxxxaa_parse_buffer (struct vsxxxaa *mouse) * activity on the mouse. */ while (mouse->count > 0 && !IS_HDR_BYTE(buf[0])) { - printk (KERN_ERR "%s on %s: Dropping a byte to regain " - "sync with mouse data stream...\n", - mouse->name, mouse->phys); - vsxxxaa_drop_bytes (mouse, 1); + printk(KERN_ERR "%s on %s: Dropping a byte to regain " + "sync with mouse data stream...\n", + mouse->name, mouse->phys); + vsxxxaa_drop_bytes(mouse, 1); } /* * Check for packets we know about. */ - if (vsxxxaa_smells_like_packet (mouse, VSXXXAA_PACKET_REL, 3)) { + if (vsxxxaa_smells_like_packet(mouse, VSXXXAA_PACKET_REL, 3)) { /* Check for broken packet */ - stray_bytes = vsxxxaa_check_packet (mouse, 3); - if (stray_bytes > 0) { - printk (KERN_ERR "Dropping %d bytes now...\n", - stray_bytes); - vsxxxaa_drop_bytes (mouse, stray_bytes); - continue; - } - - vsxxxaa_handle_REL_packet (mouse); - continue; /* More to parse? */ - } + stray_bytes = vsxxxaa_check_packet(mouse, 3); + if (!stray_bytes) + vsxxxaa_handle_REL_packet(mouse); - if (vsxxxaa_smells_like_packet (mouse, VSXXXAA_PACKET_ABS, 5)) { + } else if (vsxxxaa_smells_like_packet(mouse, + VSXXXAA_PACKET_ABS, 5)) { /* Check for broken packet */ - stray_bytes = vsxxxaa_check_packet (mouse, 5); - if (stray_bytes > 0) { - printk (KERN_ERR "Dropping %d bytes now...\n", - stray_bytes); - vsxxxaa_drop_bytes (mouse, stray_bytes); - continue; - } - - vsxxxaa_handle_ABS_packet (mouse); - continue; /* More to parse? */ - } + stray_bytes = vsxxxaa_check_packet(mouse, 5); + if (!stray_bytes) + vsxxxaa_handle_ABS_packet(mouse); - if (vsxxxaa_smells_like_packet (mouse, VSXXXAA_PACKET_POR, 4)) { + } else if (vsxxxaa_smells_like_packet(mouse, + VSXXXAA_PACKET_POR, 4)) { /* Check for broken packet */ - stray_bytes = vsxxxaa_check_packet (mouse, 4); - if (stray_bytes > 0) { - printk (KERN_ERR "Dropping %d bytes now...\n", - stray_bytes); - vsxxxaa_drop_bytes (mouse, stray_bytes); - continue; - } - - vsxxxaa_handle_POR_packet (mouse); - continue; /* More to parse? */ + stray_bytes = vsxxxaa_check_packet(mouse, 4); + if (!stray_bytes) + vsxxxaa_handle_POR_packet(mouse); + + } else { + break; /* No REL, ABS or POR packet found */ + } + + if (stray_bytes > 0) { + printk(KERN_ERR "Dropping %d bytes now...\n", + stray_bytes); + vsxxxaa_drop_bytes(mouse, stray_bytes); } - break; /* No REL, ABS or POR packet found */ } while (1); } -static irqreturn_t -vsxxxaa_interrupt (struct serio *serio, unsigned char data, unsigned int flags) +static irqreturn_t vsxxxaa_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) { - struct vsxxxaa *mouse = serio_get_drvdata (serio); + struct vsxxxaa *mouse = serio_get_drvdata(serio); - vsxxxaa_queue_byte (mouse, data); - vsxxxaa_parse_buffer (mouse); + vsxxxaa_queue_byte(mouse, data); + vsxxxaa_parse_buffer(mouse); return IRQ_HANDLED; } -static void -vsxxxaa_disconnect (struct serio *serio) +static void vsxxxaa_disconnect(struct serio *serio) { - struct vsxxxaa *mouse = serio_get_drvdata (serio); + struct vsxxxaa *mouse = serio_get_drvdata(serio); - serio_close (serio); - serio_set_drvdata (serio, NULL); - input_unregister_device (mouse->dev); - kfree (mouse); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_unregister_device(mouse->dev); + kfree(mouse); } -static int -vsxxxaa_connect (struct serio *serio, struct serio_driver *drv) +static int vsxxxaa_connect(struct serio *serio, struct serio_driver *drv) { struct vsxxxaa *mouse; struct input_dev *input_dev; int err = -ENOMEM; - mouse = kzalloc (sizeof (struct vsxxxaa), GFP_KERNEL); - input_dev = input_allocate_device (); + mouse = kzalloc(sizeof(struct vsxxxaa), GFP_KERNEL); + input_dev = input_allocate_device(); if (!mouse || !input_dev) goto fail1; mouse->dev = input_dev; mouse->serio = serio; - strlcat (mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer", - sizeof (mouse->name)); - snprintf (mouse->phys, sizeof (mouse->phys), "%s/input0", serio->phys); + strlcat(mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer", + sizeof(mouse->name)); + snprintf(mouse->phys, sizeof(mouse->phys), "%s/input0", serio->phys); input_dev->name = mouse->name; input_dev->phys = mouse->phys; input_dev->id.bustype = BUS_RS232; input_dev->dev.parent = &serio->dev; - set_bit (EV_KEY, input_dev->evbit); /* We have buttons */ - set_bit (EV_REL, input_dev->evbit); - set_bit (EV_ABS, input_dev->evbit); - set_bit (BTN_LEFT, input_dev->keybit); /* We have 3 buttons */ - set_bit (BTN_MIDDLE, input_dev->keybit); - set_bit (BTN_RIGHT, input_dev->keybit); - set_bit (BTN_TOUCH, input_dev->keybit); /* ...and Tablet */ - set_bit (REL_X, input_dev->relbit); - set_bit (REL_Y, input_dev->relbit); - input_set_abs_params (input_dev, ABS_X, 0, 1023, 0, 0); - input_set_abs_params (input_dev, ABS_Y, 0, 1023, 0, 0); - - serio_set_drvdata (serio, mouse); - - err = serio_open (serio, drv); + __set_bit(EV_KEY, input_dev->evbit); /* We have buttons */ + __set_bit(EV_REL, input_dev->evbit); + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(BTN_LEFT, input_dev->keybit); /* We have 3 buttons */ + __set_bit(BTN_MIDDLE, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + __set_bit(BTN_TOUCH, input_dev->keybit); /* ...and Tablet */ + __set_bit(REL_X, input_dev->relbit); + __set_bit(REL_Y, input_dev->relbit); + input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0); + + serio_set_drvdata(serio, mouse); + + err = serio_open(serio, drv); if (err) goto fail2; @@ -532,18 +510,18 @@ vsxxxaa_connect (struct serio *serio, struct serio_driver *drv) * Request selftest. Standard packet format and differential * mode will be requested after the device ID'ed successfully. */ - serio_write (serio, 'T'); /* Test */ + serio_write(serio, 'T'); /* Test */ - err = input_register_device (input_dev); + err = input_register_device(input_dev); if (err) goto fail3; return 0; - fail3: serio_close (serio); - fail2: serio_set_drvdata (serio, NULL); - fail1: input_free_device (input_dev); - kfree (mouse); + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(mouse); return err; } @@ -570,18 +548,16 @@ static struct serio_driver vsxxxaa_drv = { .disconnect = vsxxxaa_disconnect, }; -static int __init -vsxxxaa_init (void) +static int __init vsxxxaa_init(void) { return serio_register_driver(&vsxxxaa_drv); } -static void __exit -vsxxxaa_exit (void) +static void __exit vsxxxaa_exit(void) { serio_unregister_driver(&vsxxxaa_drv); } -module_init (vsxxxaa_init); -module_exit (vsxxxaa_exit); +module_init(vsxxxaa_init); +module_exit(vsxxxaa_exit); diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index aa533ceffe3..7e319d65ec5 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -201,4 +201,12 @@ config SERIO_XILINX_XPS_PS2 To compile this driver as a module, choose M here: the module will be called xilinx_ps2. +config SERIO_ALTERA_PS2 + tristate "Altera UP PS/2 controller" + help + Say Y here if you have Altera University Program PS/2 ports. + + To compile this driver as a module, choose M here: the + module will be called altera_ps2. + endif diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile index 9b6c8135955..bf945f789d0 100644 --- a/drivers/input/serio/Makefile +++ b/drivers/input/serio/Makefile @@ -22,3 +22,4 @@ obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o obj-$(CONFIG_SERIO_LIBPS2) += libps2.o obj-$(CONFIG_SERIO_RAW) += serio_raw.o obj-$(CONFIG_SERIO_XILINX_XPS_PS2) += xilinx_ps2.o +obj-$(CONFIG_SERIO_ALTERA_PS2) += altera_ps2.o diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c new file mode 100644 index 00000000000..f479ea50919 --- /dev/null +++ b/drivers/input/serio/altera_ps2.c @@ -0,0 +1,200 @@ +/* + * Altera University Program PS2 controller driver + * + * Copyright (C) 2008 Thomas Chou <thomas@wytron.com.tw> + * + * Based on sa1111ps2.c, which is: + * Copyright (C) 2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#define DRV_NAME "altera_ps2" + +struct ps2if { + struct serio *io; + struct resource *iomem_res; + void __iomem *base; + unsigned irq; +}; + +/* + * Read all bytes waiting in the PS2 port. There should be + * at the most one, but we loop for safety. + */ +static irqreturn_t altera_ps2_rxint(int irq, void *dev_id) +{ + struct ps2if *ps2if = dev_id; + unsigned int status; + int handled = IRQ_NONE; + + while ((status = readl(ps2if->base)) & 0xffff0000) { + serio_interrupt(ps2if->io, status & 0xff, 0); + handled = IRQ_HANDLED; + } + + return handled; +} + +/* + * Write a byte to the PS2 port. + */ +static int altera_ps2_write(struct serio *io, unsigned char val) +{ + struct ps2if *ps2if = io->port_data; + + writel(val, ps2if->base); + return 0; +} + +static int altera_ps2_open(struct serio *io) +{ + struct ps2if *ps2if = io->port_data; + + /* clear fifo */ + while (readl(ps2if->base) & 0xffff0000) + /* empty */; + + writel(1, ps2if->base + 4); /* enable rx irq */ + return 0; +} + +static void altera_ps2_close(struct serio *io) +{ + struct ps2if *ps2if = io->port_data; + + writel(0, ps2if->base); /* disable rx irq */ +} + +/* + * Add one device to this driver. + */ +static int altera_ps2_probe(struct platform_device *pdev) +{ + struct ps2if *ps2if; + struct serio *serio; + int error; + + ps2if = kzalloc(sizeof(struct ps2if), GFP_KERNEL); + serio = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!ps2if || !serio) { + error = -ENOMEM; + goto err_free_mem; + } + + serio->id.type = SERIO_8042; + serio->write = altera_ps2_write; + serio->open = altera_ps2_open; + serio->close = altera_ps2_close; + strlcpy(serio->name, dev_name(&pdev->dev), sizeof(serio->name)); + strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys)); + serio->port_data = ps2if; + serio->dev.parent = &pdev->dev; + ps2if->io = serio; + + ps2if->iomem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (ps2if->iomem_res == NULL) { + error = -ENOENT; + goto err_free_mem; + } + + ps2if->irq = platform_get_irq(pdev, 0); + if (ps2if->irq < 0) { + error = -ENXIO; + goto err_free_mem; + } + + if (!request_mem_region(ps2if->iomem_res->start, + resource_size(ps2if->iomem_res), pdev->name)) { + error = -EBUSY; + goto err_free_mem; + } + + ps2if->base = ioremap(ps2if->iomem_res->start, + resource_size(ps2if->iomem_res)); + if (!ps2if->base) { + error = -ENOMEM; + goto err_free_res; + } + + error = request_irq(ps2if->irq, altera_ps2_rxint, 0, pdev->name, ps2if); + if (error) { + dev_err(&pdev->dev, "could not allocate IRQ %d: %d\n", + ps2if->irq, error); + goto err_unmap; + } + + dev_info(&pdev->dev, "base %p, irq %d\n", ps2if->base, ps2if->irq); + + serio_register_port(ps2if->io); + platform_set_drvdata(pdev, ps2if); + + return 0; + + err_unmap: + iounmap(ps2if->base); + err_free_res: + release_mem_region(ps2if->iomem_res->start, + resource_size(ps2if->iomem_res)); + err_free_mem: + kfree(ps2if); + kfree(serio); + return error; +} + +/* + * Remove one device from this driver. + */ +static int altera_ps2_remove(struct platform_device *pdev) +{ + struct ps2if *ps2if = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + serio_unregister_port(ps2if->io); + free_irq(ps2if->irq, ps2if); + iounmap(ps2if->base); + release_mem_region(ps2if->iomem_res->start, + resource_size(ps2if->iomem_res)); + kfree(ps2if); + + return 0; +} + +/* + * Our device driver structure + */ +static struct platform_driver altera_ps2_driver = { + .probe = altera_ps2_probe, + .remove = altera_ps2_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init altera_ps2_init(void) +{ + return platform_driver_register(&altera_ps2_driver); +} + +static void __exit altera_ps2_exit(void) +{ + platform_driver_unregister(&altera_ps2_driver); +} + +module_init(altera_ps2_init); +module_exit(altera_ps2_exit); + +MODULE_DESCRIPTION("Altera University Program PS2 controller driver"); +MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 2bcf1ace27c..7fbffe431bc 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -67,10 +67,12 @@ static inline void i8042_write_command(int val) #include <linux/dmi.h> -static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { +static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = { { - /* AUX LOOP command does not raise AUX IRQ */ - .ident = "Arima-Rioworks HDAMB", + /* + * Arima-Rioworks HDAMB - + * AUX LOOP command does not raise AUX IRQ + */ .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "RIOWORKS"), DMI_MATCH(DMI_BOARD_NAME, "HDAMB"), @@ -78,7 +80,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - .ident = "ASUS G1S", + /* ASUS G1S */ .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."), DMI_MATCH(DMI_BOARD_NAME, "G1S"), @@ -86,8 +88,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - /* AUX LOOP command does not raise AUX IRQ */ - .ident = "ASUS P65UP5", + /* ASUS P65UP5 - AUX LOOP command does not raise AUX IRQ */ .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), DMI_MATCH(DMI_BOARD_NAME, "P/I-P65UP5"), @@ -95,7 +96,6 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - .ident = "Compaq Proliant 8500", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"), @@ -103,7 +103,6 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - .ident = "Compaq Proliant DL760", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"), @@ -111,7 +110,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - .ident = "OQO Model 01", + /* OQO Model 01 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "OQO"), DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), @@ -119,8 +118,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - /* AUX LOOP does not work properly */ - .ident = "ULI EV4873", + /* ULI EV4873 - AUX LOOP does not work properly */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ULI"), DMI_MATCH(DMI_PRODUCT_NAME, "EV4873"), @@ -128,7 +126,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - .ident = "Microsoft Virtual Machine", + /* Microsoft Virtual Machine */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"), @@ -136,7 +134,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - .ident = "Medion MAM 2070", + /* Medion MAM 2070 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Notebook"), DMI_MATCH(DMI_PRODUCT_NAME, "MAM 2070"), @@ -144,7 +142,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - .ident = "Blue FB5601", + /* Blue FB5601 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "blue"), DMI_MATCH(DMI_PRODUCT_NAME, "FB5601"), @@ -152,7 +150,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - .ident = "Gigabyte M912", + /* Gigabyte M912 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), DMI_MATCH(DMI_PRODUCT_NAME, "M912"), @@ -160,7 +158,6 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }, }, { - .ident = "HP DV9700", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"), @@ -177,72 +174,72 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { * ... apparently some Toshibas don't like MUX mode either and * die horrible death on reboot. */ -static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { +static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { { - .ident = "Fujitsu Lifebook P7010/P7010D", + /* Fujitsu Lifebook P7010/P7010D */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), DMI_MATCH(DMI_PRODUCT_NAME, "P7010"), }, }, { - .ident = "Fujitsu Lifebook P7010", + /* Fujitsu Lifebook P7010 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "0000000000"), }, }, { - .ident = "Fujitsu Lifebook P5020D", + /* Fujitsu Lifebook P5020D */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P Series"), }, }, { - .ident = "Fujitsu Lifebook S2000", + /* Fujitsu Lifebook S2000 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S Series"), }, }, { - .ident = "Fujitsu Lifebook S6230", + /* Fujitsu Lifebook S6230 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"), }, }, { - .ident = "Fujitsu T70H", + /* Fujitsu T70H */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"), }, }, { - .ident = "Fujitsu-Siemens Lifebook T3010", + /* Fujitsu-Siemens Lifebook T3010 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"), }, }, { - .ident = "Fujitsu-Siemens Lifebook E4010", + /* Fujitsu-Siemens Lifebook E4010 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E4010"), }, }, { - .ident = "Fujitsu-Siemens Amilo Pro 2010", + /* Fujitsu-Siemens Amilo Pro 2010 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"), }, }, { - .ident = "Fujitsu-Siemens Amilo Pro 2030", + /* Fujitsu-Siemens Amilo Pro 2030 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), @@ -253,7 +250,7 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { * No data is coming from the touchscreen unless KBC * is in legacy mode. */ - .ident = "Panasonic CF-29", + /* Panasonic CF-29 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"), DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"), @@ -261,10 +258,10 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, { /* - * Errors on MUX ports are reported without raising AUXDATA + * HP Pavilion DV4017EA - + * errors on MUX ports are reported without raising AUXDATA * causing "spurious NAK" messages. */ - .ident = "HP Pavilion DV4017EA", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EA032EA#ABF)"), @@ -272,9 +269,9 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, { /* - * Like DV4017EA does not raise AUXERR for errors on MUX ports. + * HP Pavilion ZT1000 - + * like DV4017EA does not raise AUXERR for errors on MUX ports. */ - .ident = "HP Pavilion ZT1000", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Notebook PC"), @@ -283,44 +280,41 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, { /* - * Like DV4017EA does not raise AUXERR for errors on MUX ports. + * HP Pavilion DV4270ca - + * like DV4017EA does not raise AUXERR for errors on MUX ports. */ - .ident = "HP Pavilion DV4270ca", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EH476UA#ABL)"), }, }, { - .ident = "Toshiba P10", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"), }, }, { - .ident = "Toshiba Equium A110", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"), }, }, { - .ident = "Alienware Sentia", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"), DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"), }, }, { - .ident = "Sharp Actius MM20", + /* Sharp Actius MM20 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SHARP"), DMI_MATCH(DMI_PRODUCT_NAME, "PC-MM20 Series"), }, }, { - .ident = "Sony Vaio FS-115b", + /* Sony Vaio FS-115b */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FS115B"), @@ -328,73 +322,72 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, { /* - * Reset and GET ID commands issued via KBD port are + * Sony Vaio FZ-240E - + * reset and GET ID commands issued via KBD port are * sometimes being delivered to AUX3. */ - .ident = "Sony Vaio FZ-240E", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"), }, }, { - .ident = "Amoi M636/A737", + /* Amoi M636/A737 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"), }, }, { - .ident = "Lenovo 3000 n100", + /* Lenovo 3000 n100 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "076804U"), }, }, { - .ident = "Acer Aspire 1360", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"), }, }, { - .ident = "Gericom Bellagio", + /* Gericom Bellagio */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Gericom"), DMI_MATCH(DMI_PRODUCT_NAME, "N34AS6"), }, }, { - .ident = "IBM 2656", + /* IBM 2656 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), DMI_MATCH(DMI_PRODUCT_NAME, "2656"), }, }, { - .ident = "Dell XPS M1530", + /* Dell XPS M1530 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"), }, }, { - .ident = "Compal HEL80I", + /* Compal HEL80I */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"), DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"), }, }, { - .ident = "Dell Vostro 1510", + /* Dell Vostro 1510 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"), }, }, { - .ident = "Acer Aspire 5536", + /* Acer Aspire 5536 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"), @@ -404,65 +397,65 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { { } }; -static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { +static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = { { - .ident = "MSI Wind U-100", + /* MSI Wind U-100 */ .matches = { DMI_MATCH(DMI_BOARD_NAME, "U-100"), DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), }, }, { - .ident = "LG Electronics X110", + /* LG Electronics X110 */ .matches = { DMI_MATCH(DMI_BOARD_NAME, "X110"), DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), }, }, { - .ident = "Acer Aspire One 150", + /* Acer Aspire One 150 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"), }, }, { - .ident = "Advent 4211", + /* Advent 4211 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"), DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"), }, }, { - .ident = "Medion Akoya Mini E1210", + /* Medion Akoya Mini E1210 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), DMI_MATCH(DMI_PRODUCT_NAME, "E1210"), }, }, { - .ident = "Mivvy M310", + /* Mivvy M310 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"), DMI_MATCH(DMI_PRODUCT_NAME, "N10"), }, }, { - .ident = "Dell Vostro 1320", + /* Dell Vostro 1320 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1320"), }, }, { - .ident = "Dell Vostro 1520", + /* Dell Vostro 1520 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1520"), }, }, { - .ident = "Dell Vostro 1720", + /* Dell Vostro 1720 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"), @@ -472,16 +465,16 @@ static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { }; #ifdef CONFIG_PNP -static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { +static const struct dmi_system_id __initconst i8042_dmi_nopnp_table[] = { { - .ident = "Intel MBO Desktop D845PESV", + /* Intel MBO Desktop D845PESV */ .matches = { DMI_MATCH(DMI_BOARD_NAME, "D845PESV"), DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), }, }, { - .ident = "MSI Wind U-100", + /* MSI Wind U-100 */ .matches = { DMI_MATCH(DMI_BOARD_NAME, "U-100"), DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), @@ -490,27 +483,23 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { { } }; -static struct dmi_system_id __initdata i8042_dmi_laptop_table[] = { +static const struct dmi_system_id __initconst i8042_dmi_laptop_table[] = { { - .ident = "Portable", .matches = { DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ }, }, { - .ident = "Laptop", .matches = { DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */ }, }, { - .ident = "Notebook", .matches = { DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */ }, }, { - .ident = "Sub-Notebook", .matches = { DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */ }, @@ -525,58 +514,58 @@ static struct dmi_system_id __initdata i8042_dmi_laptop_table[] = { * Originally, this was just confined to older laptops, but a few Acer laptops * have turned up in 2007 that also need this again. */ -static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = { +static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = { { - .ident = "Acer Aspire 5630", + /* Acer Aspire 5630 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5630"), }, }, { - .ident = "Acer Aspire 5650", + /* Acer Aspire 5650 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5650"), }, }, { - .ident = "Acer Aspire 5680", + /* Acer Aspire 5680 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5680"), }, }, { - .ident = "Acer Aspire 5720", + /* Acer Aspire 5720 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"), }, }, { - .ident = "Acer Aspire 9110", + /* Acer Aspire 9110 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"), }, }, { - .ident = "Acer TravelMate 660", + /* Acer TravelMate 660 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"), }, }, { - .ident = "Acer TravelMate 2490", + /* Acer TravelMate 2490 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"), }, }, { - .ident = "Acer TravelMate 4280", + /* Acer TravelMate 4280 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"), diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c new file mode 100644 index 00000000000..fbd3987af57 --- /dev/null +++ b/drivers/input/sparse-keymap.c @@ -0,0 +1,250 @@ +/* + * Generic support for sparse keymaps + * + * Copyright (c) 2009 Dmitry Torokhov + * + * Derived from wistron button driver: + * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz> + * Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org> + * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/input.h> +#include <linux/input/sparse-keymap.h> + +MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>"); +MODULE_DESCRIPTION("Generic support for sparse keymaps"); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION("0.1"); + +/** + * sparse_keymap_entry_from_scancode - perform sparse keymap lookup + * @dev: Input device using sparse keymap + * @code: Scan code + * + * This function is used to perform &struct key_entry lookup in an + * input device using sparse keymap. + */ +struct key_entry *sparse_keymap_entry_from_scancode(struct input_dev *dev, + unsigned int code) +{ + struct key_entry *key; + + for (key = dev->keycode; key->type != KE_END; key++) + if (code == key->code) + return key; + + return NULL; +} +EXPORT_SYMBOL(sparse_keymap_entry_from_scancode); + +/** + * sparse_keymap_entry_from_keycode - perform sparse keymap lookup + * @dev: Input device using sparse keymap + * @keycode: Key code + * + * This function is used to perform &struct key_entry lookup in an + * input device using sparse keymap. + */ +struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev, + unsigned int keycode) +{ + struct key_entry *key; + + for (key = dev->keycode; key->type != KE_END; key++) + if (key->type == KE_KEY && keycode == key->keycode) + return key; + + return NULL; +} +EXPORT_SYMBOL(sparse_keymap_entry_from_keycode); + +static int sparse_keymap_getkeycode(struct input_dev *dev, + int scancode, int *keycode) +{ + const struct key_entry *key = + sparse_keymap_entry_from_scancode(dev, scancode); + + if (key && key->type == KE_KEY) { + *keycode = key->keycode; + return 0; + } + + return -EINVAL; +} + +static int sparse_keymap_setkeycode(struct input_dev *dev, + int scancode, int keycode) +{ + struct key_entry *key; + int old_keycode; + + if (keycode < 0 || keycode > KEY_MAX) + return -EINVAL; + + key = sparse_keymap_entry_from_scancode(dev, scancode); + if (key && key->type == KE_KEY) { + old_keycode = key->keycode; + key->keycode = keycode; + set_bit(keycode, dev->keybit); + if (!sparse_keymap_entry_from_keycode(dev, old_keycode)) + clear_bit(old_keycode, dev->keybit); + return 0; + } + + return -EINVAL; +} + +/** + * sparse_keymap_setup - set up sparse keymap for an input device + * @dev: Input device + * @keymap: Keymap in form of array of &key_entry structures ending + * with %KE_END type entry + * @setup: Function that can be used to adjust keymap entries + * depending on device's deeds, may be %NULL + * + * The function calculates size and allocates copy of the original + * keymap after which sets up input device event bits appropriately. + * Before destroying input device allocated keymap should be freed + * with a call to sparse_keymap_free(). + */ +int sparse_keymap_setup(struct input_dev *dev, + const struct key_entry *keymap, + int (*setup)(struct input_dev *, struct key_entry *)) +{ + size_t map_size = 1; /* to account for the last KE_END entry */ + const struct key_entry *e; + struct key_entry *map, *entry; + int i; + int error; + + for (e = keymap; e->type != KE_END; e++) + map_size++; + + map = kcalloc(map_size, sizeof (struct key_entry), GFP_KERNEL); + if (!map) + return -ENOMEM; + + memcpy(map, keymap, map_size * sizeof (struct key_entry)); + + for (i = 0; i < map_size; i++) { + entry = &map[i]; + + if (setup) { + error = setup(dev, entry); + if (error) + goto err_out; + } + + switch (entry->type) { + case KE_KEY: + __set_bit(EV_KEY, dev->evbit); + __set_bit(entry->keycode, dev->keybit); + break; + + case KE_SW: + __set_bit(EV_SW, dev->evbit); + __set_bit(entry->sw.code, dev->swbit); + break; + } + } + + dev->keycode = map; + dev->keycodemax = map_size; + dev->getkeycode = sparse_keymap_getkeycode; + dev->setkeycode = sparse_keymap_setkeycode; + + return 0; + + err_out: + kfree(keymap); + return error; + +} +EXPORT_SYMBOL(sparse_keymap_setup); + +/** + * sparse_keymap_free - free memory allocated for sparse keymap + * @dev: Input device using sparse keymap + * + * This function is used to free memory allocated by sparse keymap + * in an input device that was set up by sparse_keymap_setup(). + */ +void sparse_keymap_free(struct input_dev *dev) +{ + kfree(dev->keycode); + dev->keycode = NULL; + dev->keycodemax = 0; + dev->getkeycode = NULL; + dev->setkeycode = NULL; +} +EXPORT_SYMBOL(sparse_keymap_free); + +/** + * sparse_keymap_report_entry - report event corresponding to given key entry + * @dev: Input device for which event should be reported + * @ke: key entry describing event + * @value: Value that should be reported (ignored by %KE_SW entries) + * @autorelease: Signals whether release event should be emitted for %KE_KEY + * entries right after reporting press event, ignored by all other + * entries + * + * This function is used to report input event described by given + * &struct key_entry. + */ +void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke, + unsigned int value, bool autorelease) +{ + switch (ke->type) { + case KE_KEY: + input_report_key(dev, ke->keycode, value); + input_sync(dev); + if (value && autorelease) { + input_report_key(dev, ke->keycode, 0); + input_sync(dev); + } + break; + + case KE_SW: + value = ke->sw.value; + /* fall through */ + + case KE_VSW: + input_report_switch(dev, ke->sw.code, value); + break; + } +} +EXPORT_SYMBOL(sparse_keymap_report_entry); + +/** + * sparse_keymap_report_event - report event corresponding to given scancode + * @dev: Input device using sparse keymap + * @code: Scan code + * @value: Value that should be reported (ignored by %KE_SW entries) + * @autorelease: Signals whether release event should be emitted for %KE_KEY + * entries right after reporting press event, ignored by all other + * entries + * + * This function is used to perform lookup in an input device using sparse + * keymap and report corresponding event. Returns %true if lookup was + * successful and %false otherwise. + */ +bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code, + unsigned int value, bool autorelease) +{ + const struct key_entry *ke = + sparse_keymap_entry_from_scancode(dev, code); + + if (ke) { + sparse_keymap_report_entry(dev, ke, value, autorelease); + return true; + } + + return false; +} +EXPORT_SYMBOL(sparse_keymap_report_event); + diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 8cc453c85ea..32fc8ba039a 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -111,6 +111,18 @@ config TOUCHSCREEN_DA9034 Say Y here to enable the support for the touchscreen found on Dialog Semiconductor DA9034 PMIC. +config TOUCHSCREEN_DYNAPRO + tristate "Dynapro serial touchscreen" + select SERIO + help + Say Y here if you have a Dynapro serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called dynapro. + config TOUCHSCREEN_EETI tristate "EETI touchscreen panel support" depends on I2C @@ -133,6 +145,18 @@ config TOUCHSCREEN_FUJITSU To compile this driver as a module, choose M here: the module will be called fujitsu-ts. +config TOUCHSCREEN_S3C2410 + tristate "Samsung S3C2410 touchscreen input driver" + depends on ARCH_S3C2410 + select S3C24XX_ADC + help + Say Y here if you have the s3c2410 touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called s3c2410_ts. + config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO @@ -297,7 +321,7 @@ config TOUCHSCREEN_TOUCHWIN config TOUCHSCREEN_ATMEL_TSADCC tristate "Atmel Touchscreen Interface" - depends on ARCH_AT91SAM9RL + depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 help Say Y here if you have a 4-wire touchscreen connected to the ADC Controller on your Atmel SoC (such as the AT91SAM9RL). @@ -418,6 +442,7 @@ config TOUCHSCREEN_USB_COMPOSITE - IdealTEK URTC1000 - GoTop Super_Q2/GogoPen/PenPower tablets - JASTEC USB Touch Controller/DigiTech DTR-02U + - Zytronic controllers Have a look at <http://linux.chapter7.ch/touchkit/> for a usage description and the required user-space stuff. @@ -490,6 +515,16 @@ config TOUCHSCREEN_USB_E2I bool "e2i Touchscreen controller (e.g. from Mimo 740)" depends on TOUCHSCREEN_USB_COMPOSITE +config TOUCHSCREEN_USB_ZYTRONIC + default y + bool "Zytronic controller" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_ETT_TC5UH + default y + bool "ET&T TC5UH touchscreen controler support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 15fa62cffc7..f1f59c9e121 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o +obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o @@ -25,7 +26,9 @@ obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o +obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o +obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o @@ -41,4 +44,3 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o -obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 09c810999b9..52d2ca147d8 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -29,10 +29,9 @@ #include <linux/spi/ads7846.h> #include <asm/irq.h> - /* * This code has been heavily tested on a Nokia 770, and lightly - * tested on other ads7846 devices (OSK/Mistral, Lubbock). + * tested on other ads7846 devices (OSK/Mistral, Lubbock, Spitz). * TSC2046 is just newer ads7846 silicon. * Support for ads7843 tested on Atmel at91sam926x-EK. * Support for ads7845 has only been stubbed in. @@ -43,7 +42,7 @@ * have to maintain our own SW IRQ disabled status. This should be * removed as soon as the affected platform's IRQ handling is fixed. * - * app note sbaa036 talks in more detail about accurate sampling... + * App note sbaa036 talks in more detail about accurate sampling... * that ought to help in situations like LCDs inducing noise (which * can also be helped by using synch signals) and more generally. * This driver tries to utilize the measures described in the app @@ -566,10 +565,8 @@ static void ads7846_rx(void *ads) * once more the measurement */ if (packet->tc.ignore || Rt > ts->pressure_max) { -#ifdef VERBOSE - pr_debug("%s: ignored %d pressure %d\n", - dev_name(&ts->spi->dev), packet->tc.ignore, Rt); -#endif + dev_vdbg(&ts->spi->dev, "ignored %d pressure %d\n", + packet->tc.ignore, Rt); hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), HRTIMER_MODE_REL); return; @@ -598,9 +595,7 @@ static void ads7846_rx(void *ads) if (!ts->pendown) { input_report_key(input, BTN_TOUCH, 1); ts->pendown = 1; -#ifdef VERBOSE - dev_dbg(&ts->spi->dev, "DOWN\n"); -#endif + dev_vdbg(&ts->spi->dev, "DOWN\n"); } if (ts->swap_xy) @@ -608,12 +603,10 @@ static void ads7846_rx(void *ads) input_report_abs(input, ABS_X, x); input_report_abs(input, ABS_Y, y); - input_report_abs(input, ABS_PRESSURE, Rt); + input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt); input_sync(input); -#ifdef VERBOSE - dev_dbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt); -#endif + dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt); } hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), @@ -723,9 +716,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle) input_sync(input); ts->pendown = 0; -#ifdef VERBOSE - dev_dbg(&ts->spi->dev, "UP\n"); -#endif + dev_vdbg(&ts->spi->dev, "UP\n"); } /* measurement cycle ended */ diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c index 9c7fce4d74d..3d9b5166ebe 100644 --- a/drivers/input/touchscreen/atmel_tsadcc.c +++ b/drivers/input/touchscreen/atmel_tsadcc.c @@ -22,6 +22,8 @@ #include <linux/clk.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <mach/board.h> +#include <mach/cpu.h> /* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */ @@ -36,7 +38,9 @@ #define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */ #define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */ #define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */ +#define ATMEL_TSADCC_PRES (1 << 7) /* Pressure Measurement Selection */ #define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ +#define ATMEL_TSADCC_EPRESCAL (0xff << 8) /* Prescalar Rate Selection (Extended) */ #define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */ #define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */ #define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */ @@ -84,7 +88,13 @@ #define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */ #define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */ -#define ADC_CLOCK 1000000 +#define ATMEL_TSADCC_XPOS 0x50 +#define ATMEL_TSADCC_Z1DAT 0x54 +#define ATMEL_TSADCC_Z2DAT 0x58 + +#define PRESCALER_VAL(x) ((x) >> 8) + +#define ADC_DEFAULT_CLOCK 100000 struct atmel_tsadcc { struct input_dev *input; @@ -172,6 +182,7 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev) struct atmel_tsadcc *ts_dev; struct input_dev *input_dev; struct resource *res; + struct at91_tsadcc_data *pdata = pdev->dev.platform_data; int err = 0; unsigned int prsc; unsigned int reg; @@ -242,31 +253,49 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev) input_dev->phys = ts_dev->phys; input_dev->dev.parent = &pdev->dev; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - + __set_bit(EV_ABS, input_dev->evbit); input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0); input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0); + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); + /* clk_enable() always returns 0, no need to check it */ clk_enable(ts_dev->clk); prsc = clk_get_rate(ts_dev->clk); dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc); - prsc = prsc / ADC_CLOCK / 2 - 1; + if (!pdata) + goto err_fail; + + if (!pdata->adc_clock) + pdata->adc_clock = ADC_DEFAULT_CLOCK; + + prsc = (prsc / (2 * pdata->adc_clock)) - 1; + + /* saturate if this value is too high */ + if (cpu_is_at91sam9rl()) { + if (prsc > PRESCALER_VAL(ATMEL_TSADCC_PRESCAL)) + prsc = PRESCALER_VAL(ATMEL_TSADCC_PRESCAL); + } else { + if (prsc > PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL)) + prsc = PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL); + } + + dev_info(&pdev->dev, "Prescaler is set at: %d\n", prsc); reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE | ((0x00 << 5) & ATMEL_TSADCC_SLEEP) | /* Normal Mode */ ((0x01 << 6) & ATMEL_TSADCC_PENDET) | /* Enable Pen Detect */ - ((prsc << 8) & ATMEL_TSADCC_PRESCAL) | /* PRESCAL */ - ((0x13 << 16) & ATMEL_TSADCC_STARTUP) | /* STARTUP */ - ((0x0F << 28) & ATMEL_TSADCC_PENDBC); /* PENDBC */ + (prsc << 8) | + ((0x26 << 16) & ATMEL_TSADCC_STARTUP) | + ((pdata->pendet_debounce << 28) & ATMEL_TSADCC_PENDBC); atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST); atmel_tsadcc_write(ATMEL_TSADCC_MR, reg); atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE); - atmel_tsadcc_write(ATMEL_TSADCC_TSR, (0x3 << 24) & ATMEL_TSADCC_TSSHTIM); + atmel_tsadcc_write(ATMEL_TSADCC_TSR, + (pdata->ts_sample_hold_time << 24) & ATMEL_TSADCC_TSSHTIM); atmel_tsadcc_read(ATMEL_TSADCC_SR); atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT); diff --git a/drivers/input/touchscreen/dynapro.c b/drivers/input/touchscreen/dynapro.c new file mode 100644 index 00000000000..455353908bd --- /dev/null +++ b/drivers/input/touchscreen/dynapro.c @@ -0,0 +1,206 @@ +/* + * Dynapro serial touchscreen driver + * + * Copyright (c) 2009 Tias Guns + * Based on the inexio driver (c) Vojtech Pavlik and Dan Streetman and + * Richard Lemon + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * 2009/09/19 Tias Guns <tias@ulyssis.org> + * Copied inexio.c and edited for Dynapro protocol (from retired Xorg module) + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Dynapro serial touchscreen driver" + +MODULE_AUTHOR("Tias Guns <tias@ulyssis.org>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define DYNAPRO_FORMAT_TOUCH_BIT 0x40 +#define DYNAPRO_FORMAT_LENGTH 3 +#define DYNAPRO_RESPONSE_BEGIN_BYTE 0x80 + +#define DYNAPRO_MIN_XC 0 +#define DYNAPRO_MAX_XC 0x3ff +#define DYNAPRO_MIN_YC 0 +#define DYNAPRO_MAX_YC 0x3ff + +#define DYNAPRO_GET_XC(data) (data[1] | ((data[0] & 0x38) << 4)) +#define DYNAPRO_GET_YC(data) (data[2] | ((data[0] & 0x07) << 7)) +#define DYNAPRO_GET_TOUCHED(data) (DYNAPRO_FORMAT_TOUCH_BIT & data[0]) + +/* + * Per-touchscreen data. + */ + +struct dynapro { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[DYNAPRO_FORMAT_LENGTH]; + char phys[32]; +}; + +static void dynapro_process_data(struct dynapro *pdynapro) +{ + struct input_dev *dev = pdynapro->dev; + + if (DYNAPRO_FORMAT_LENGTH == ++pdynapro->idx) { + input_report_abs(dev, ABS_X, DYNAPRO_GET_XC(pdynapro->data)); + input_report_abs(dev, ABS_Y, DYNAPRO_GET_YC(pdynapro->data)); + input_report_key(dev, BTN_TOUCH, + DYNAPRO_GET_TOUCHED(pdynapro->data)); + input_sync(dev); + + pdynapro->idx = 0; + } +} + +static irqreturn_t dynapro_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct dynapro *pdynapro = serio_get_drvdata(serio); + + pdynapro->data[pdynapro->idx] = data; + + if (DYNAPRO_RESPONSE_BEGIN_BYTE & pdynapro->data[0]) + dynapro_process_data(pdynapro); + else + dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n", + pdynapro->data[0]); + + return IRQ_HANDLED; +} + +static void dynapro_disconnect(struct serio *serio) +{ + struct dynapro *pdynapro = serio_get_drvdata(serio); + + input_get_device(pdynapro->dev); + input_unregister_device(pdynapro->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(pdynapro->dev); + kfree(pdynapro); +} + +/* + * dynapro_connect() is the routine that is called when someone adds a + * new serio device that supports dynapro protocol and registers it as + * an input device. This is usually accomplished using inputattach. + */ + +static int dynapro_connect(struct serio *serio, struct serio_driver *drv) +{ + struct dynapro *pdynapro; + struct input_dev *input_dev; + int err; + + pdynapro = kzalloc(sizeof(struct dynapro), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pdynapro || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + pdynapro->serio = serio; + pdynapro->dev = input_dev; + snprintf(pdynapro->phys, sizeof(pdynapro->phys), + "%s/input0", serio->phys); + + input_dev->name = "Dynapro Serial TouchScreen"; + input_dev->phys = pdynapro->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_DYNAPRO; + input_dev->id.product = 0; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(pdynapro->dev, ABS_X, + DYNAPRO_MIN_XC, DYNAPRO_MAX_XC, 0, 0); + input_set_abs_params(pdynapro->dev, ABS_Y, + DYNAPRO_MIN_YC, DYNAPRO_MAX_YC, 0, 0); + + serio_set_drvdata(serio, pdynapro); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(pdynapro->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(pdynapro); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id dynapro_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_DYNAPRO, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, dynapro_serio_ids); + +static struct serio_driver dynapro_drv = { + .driver = { + .name = "dynapro", + }, + .description = DRIVER_DESC, + .id_table = dynapro_serio_ids, + .interrupt = dynapro_interrupt, + .connect = dynapro_connect, + .disconnect = dynapro_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init dynapro_init(void) +{ + return serio_register_driver(&dynapro_drv); +} + +static void __exit dynapro_exit(void) +{ + serio_unregister_driver(&dynapro_drv); +} + +module_init(dynapro_init); +module_exit(dynapro_exit); diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c new file mode 100644 index 00000000000..6386b441ef8 --- /dev/null +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -0,0 +1,457 @@ +/* + * Samsung S3C24XX touchscreen driver + * + * This program is free software; you can redistribute it and/or modify + * it under the term of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright 2004 Arnaud Patard <arnaud.patard@rtp-net.org> + * Copyright 2008 Ben Dooks <ben-linux@fluff.org> + * Copyright 2009 Simtec Electronics <linux@simtec.co.uk> + * + * Additional work by Herbert Pötzl <herbert@13thfloor.at> and + * Harald Welte <laforge@openmoko.org> + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <plat/adc.h> +#include <plat/regs-adc.h> + +#include <mach/regs-gpio.h> +#include <mach/ts.h> + +#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) + +#define INT_DOWN (0) +#define INT_UP (1 << 8) + +#define WAIT4INT (S3C2410_ADCTSC_YM_SEN | \ + S3C2410_ADCTSC_YP_SEN | \ + S3C2410_ADCTSC_XP_SEN | \ + S3C2410_ADCTSC_XY_PST(3)) + +#define AUTOPST (S3C2410_ADCTSC_YM_SEN | \ + S3C2410_ADCTSC_YP_SEN | \ + S3C2410_ADCTSC_XP_SEN | \ + S3C2410_ADCTSC_AUTO_PST | \ + S3C2410_ADCTSC_XY_PST(0)) + +/* Per-touchscreen data. */ + +/** + * struct s3c2410ts - driver touchscreen state. + * @client: The ADC client we registered with the core driver. + * @dev: The device we are bound to. + * @input: The input device we registered with the input subsystem. + * @clock: The clock for the adc. + * @io: Pointer to the IO base. + * @xp: The accumulated X position data. + * @yp: The accumulated Y position data. + * @irq_tc: The interrupt number for pen up/down interrupt + * @count: The number of samples collected. + * @shift: The log2 of the maximum count to read in one go. + */ +struct s3c2410ts { + struct s3c_adc_client *client; + struct device *dev; + struct input_dev *input; + struct clk *clock; + void __iomem *io; + unsigned long xp; + unsigned long yp; + int irq_tc; + int count; + int shift; +}; + +static struct s3c2410ts ts; + +/** + * s3c2410_ts_connect - configure gpio for s3c2410 systems + * + * Configure the GPIO for the S3C2410 system, where we have external FETs + * connected to the device (later systems such as the S3C2440 integrate + * these into the device). +*/ +static inline void s3c2410_ts_connect(void) +{ + s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON); + s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON); + s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON); + s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON); +} + +/** + * get_down - return the down state of the pen + * @data0: The data read from ADCDAT0 register. + * @data1: The data read from ADCDAT1 register. + * + * Return non-zero if both readings show that the pen is down. + */ +static inline bool get_down(unsigned long data0, unsigned long data1) +{ + /* returns true if both data values show stylus down */ + return (!(data0 & S3C2410_ADCDAT0_UPDOWN) && + !(data1 & S3C2410_ADCDAT0_UPDOWN)); +} + +static void touch_timer_fire(unsigned long data) +{ + unsigned long data0; + unsigned long data1; + bool down; + + data0 = readl(ts.io + S3C2410_ADCDAT0); + data1 = readl(ts.io + S3C2410_ADCDAT1); + + down = get_down(data0, data1); + + if (ts.count == (1 << ts.shift)) { + ts.xp >>= ts.shift; + ts.yp >>= ts.shift; + + dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n", + __func__, ts.xp, ts.yp, ts.count); + + input_report_abs(ts.input, ABS_X, ts.xp); + input_report_abs(ts.input, ABS_Y, ts.yp); + + input_report_key(ts.input, BTN_TOUCH, 1); + input_sync(ts.input); + + ts.xp = 0; + ts.yp = 0; + ts.count = 0; + } + + if (down) { + s3c_adc_start(ts.client, 0, 1 << ts.shift); + } else { + ts.count = 0; + + input_report_key(ts.input, BTN_TOUCH, 0); + input_sync(ts.input); + + writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC); + } +} + +static DEFINE_TIMER(touch_timer, touch_timer_fire, 0, 0); + +/** + * stylus_irq - touchscreen stylus event interrupt + * @irq: The interrupt number + * @dev_id: The device ID. + * + * Called when the IRQ_TC is fired for a pen up or down event. + */ +static irqreturn_t stylus_irq(int irq, void *dev_id) +{ + unsigned long data0; + unsigned long data1; + bool down; + + data0 = readl(ts.io + S3C2410_ADCDAT0); + data1 = readl(ts.io + S3C2410_ADCDAT1); + + down = get_down(data0, data1); + + /* TODO we should never get an interrupt with down set while + * the timer is running, but maybe we ought to verify that the + * timer isn't running anyways. */ + + if (down) + s3c_adc_start(ts.client, 0, 1 << ts.shift); + else + dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count); + + return IRQ_HANDLED; +} + +/** + * s3c24xx_ts_conversion - ADC conversion callback + * @client: The client that was registered with the ADC core. + * @data0: The reading from ADCDAT0. + * @data1: The reading from ADCDAT1. + * @left: The number of samples left. + * + * Called when a conversion has finished. + */ +static void s3c24xx_ts_conversion(struct s3c_adc_client *client, + unsigned data0, unsigned data1, + unsigned *left) +{ + dev_dbg(ts.dev, "%s: %d,%d\n", __func__, data0, data1); + + ts.xp += data0; + ts.yp += data1; + + ts.count++; + + /* From tests, it seems that it is unlikely to get a pen-up + * event during the conversion process which means we can + * ignore any pen-up events with less than the requisite + * count done. + * + * In several thousand conversions, no pen-ups where detected + * before count completed. + */ +} + +/** + * s3c24xx_ts_select - ADC selection callback. + * @client: The client that was registered with the ADC core. + * @select: The reason for select. + * + * Called when the ADC core selects (or deslects) us as a client. + */ +static void s3c24xx_ts_select(struct s3c_adc_client *client, unsigned select) +{ + if (select) { + writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, + ts.io + S3C2410_ADCTSC); + } else { + mod_timer(&touch_timer, jiffies+1); + writel(WAIT4INT | INT_UP, ts.io + S3C2410_ADCTSC); + } +} + +/** + * s3c2410ts_probe - device core probe entry point + * @pdev: The device we are being bound to. + * + * Initialise, find and allocate any resources we need to run and then + * register with the ADC and input systems. + */ +static int __devinit s3c2410ts_probe(struct platform_device *pdev) +{ + struct s3c2410_ts_mach_info *info; + struct device *dev = &pdev->dev; + struct input_dev *input_dev; + struct resource *res; + int ret = -EINVAL; + + /* Initialise input stuff */ + memset(&ts, 0, sizeof(struct s3c2410ts)); + + ts.dev = dev; + + info = pdev->dev.platform_data; + if (!info) { + dev_err(dev, "no platform data, cannot attach\n"); + return -EINVAL; + } + + dev_dbg(dev, "initialising touchscreen\n"); + + ts.clock = clk_get(dev, "adc"); + if (IS_ERR(ts.clock)) { + dev_err(dev, "cannot get adc clock source\n"); + return -ENOENT; + } + + clk_enable(ts.clock); + dev_dbg(dev, "got and enabled clocks\n"); + + ts.irq_tc = ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(dev, "no resource for interrupt\n"); + goto err_clk; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "no resource for registers\n"); + ret = -ENOENT; + goto err_clk; + } + + ts.io = ioremap(res->start, resource_size(res)); + if (ts.io == NULL) { + dev_err(dev, "cannot map registers\n"); + ret = -ENOMEM; + goto err_clk; + } + + /* Configure the touchscreen external FETs on the S3C2410 */ + if (!platform_get_device_id(pdev)->driver_data) + s3c2410_ts_connect(); + + ts.client = s3c_adc_register(pdev, s3c24xx_ts_select, + s3c24xx_ts_conversion, 1); + if (IS_ERR(ts.client)) { + dev_err(dev, "failed to register adc client\n"); + ret = PTR_ERR(ts.client); + goto err_iomap; + } + + /* Initialise registers */ + if ((info->delay & 0xffff) > 0) + writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY); + + writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC); + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(dev, "Unable to allocate the input device !!\n"); + ret = -ENOMEM; + goto err_iomap; + } + + ts.input = input_dev; + ts.input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + ts.input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(ts.input, ABS_X, 0, 0x3FF, 0, 0); + input_set_abs_params(ts.input, ABS_Y, 0, 0x3FF, 0, 0); + + ts.input->name = "S3C24XX TouchScreen"; + ts.input->id.bustype = BUS_HOST; + ts.input->id.vendor = 0xDEAD; + ts.input->id.product = 0xBEEF; + ts.input->id.version = 0x0102; + + ts.shift = info->oversampling_shift; + + ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED, + "s3c2410_ts_pen", ts.input); + if (ret) { + dev_err(dev, "cannot get TC interrupt\n"); + goto err_inputdev; + } + + dev_info(dev, "driver attached, registering input device\n"); + + /* All went ok, so register to the input system */ + ret = input_register_device(ts.input); + if (ret < 0) { + dev_err(dev, "failed to register input device\n"); + ret = -EIO; + goto err_tcirq; + } + + return 0; + + err_tcirq: + free_irq(ts.irq_tc, ts.input); + err_inputdev: + input_unregister_device(ts.input); + err_iomap: + iounmap(ts.io); + err_clk: + del_timer_sync(&touch_timer); + clk_put(ts.clock); + return ret; +} + +/** + * s3c2410ts_remove - device core removal entry point + * @pdev: The device we are being removed from. + * + * Free up our state ready to be removed. + */ +static int __devexit s3c2410ts_remove(struct platform_device *pdev) +{ + free_irq(ts.irq_tc, ts.input); + del_timer_sync(&touch_timer); + + clk_disable(ts.clock); + clk_put(ts.clock); + + input_unregister_device(ts.input); + iounmap(ts.io); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c2410ts_suspend(struct device *dev) +{ + writel(TSC_SLEEP, ts.io + S3C2410_ADCTSC); + disable_irq(ts.irq_tc); + clk_disable(ts.clock); + + return 0; +} + +static int s3c2410ts_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s3c2410_ts_mach_info *info = pdev->dev.platform_data; + + clk_enable(ts.clock); + + /* Initialise registers */ + if ((info->delay & 0xffff) > 0) + writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY); + + writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC); + + return 0; +} + +static struct dev_pm_ops s3c_ts_pmops = { + .suspend = s3c2410ts_suspend, + .resume = s3c2410ts_resume, +}; +#endif + +static struct platform_device_id s3cts_driver_ids[] = { + { "s3c2410-ts", 0 }, + { "s3c2440-ts", 1 }, + { } +}; +MODULE_DEVICE_TABLE(platform, s3cts_driver_ids); + +static struct platform_driver s3c_ts_driver = { + .driver = { + .name = "s3c24xx-ts", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &s3c_ts_pmops, +#endif + }, + .id_table = s3cts_driver_ids, + .probe = s3c2410ts_probe, + .remove = __devexit_p(s3c2410ts_remove), +}; + +static int __init s3c2410ts_init(void) +{ + return platform_driver_register(&s3c_ts_driver); +} + +static void __exit s3c2410ts_exit(void) +{ + platform_driver_unregister(&s3c_ts_driver); +} + +module_init(s3c2410ts_init); +module_exit(s3c2410ts_exit); + +MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>, " + "Ben Dooks <ben@simtec.co.uk>, " + "Simtec Electronics <linux@simtec.co.uk>"); +MODULE_DESCRIPTION("S3C24XX Touchscreen driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 095f84b1f56..89dcbe7b4b0 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -355,10 +355,13 @@ static int ucb1400_ts_probe(struct platform_device *dev) goto err; } - error = ucb1400_ts_detect_irq(ucb); - if (error) { - printk(KERN_ERR "UCB1400: IRQ probe failed\n"); - goto err_free_devs; + /* Only in case the IRQ line wasn't supplied, try detecting it */ + if (ucb->irq < 0) { + error = ucb1400_ts_detect_irq(ucb); + if (error) { + printk(KERN_ERR "UCB1400: IRQ probe failed\n"); + goto err_free_devs; + } } init_waitqueue_head(&ucb->ts_wait); diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 68ece5801a5..09a5e7341bd 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -14,6 +14,7 @@ * - General Touch * - GoTop Super_Q2/GogoPen/PenPower tablets * - JASTEC USB touch controller/DigiTech DTR-02U + * - Zytronic capacitive touchscreen * * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch> * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -73,6 +74,15 @@ struct usbtouch_device_info { int min_press, max_press; int rept_size; + /* + * Always service the USB devices irq not just when the input device is + * open. This is useful when devices have a watchdog which prevents us + * from periodically polling the device. Leave this unset unless your + * touchscreen device requires it, as it does consume more of the USB + * bandwidth. + */ + bool irq_always; + void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len); /* @@ -121,6 +131,8 @@ enum { DEVTYPE_GOTOP, DEVTYPE_JASTEC, DEVTYPE_E2I, + DEVTYPE_ZYTRONIC, + DEVTYPE_TC5UH, }; #define USB_DEVICE_HID_CLASS(vend, prod) \ @@ -201,6 +213,15 @@ static struct usb_device_id usbtouch_devices[] = { #ifdef CONFIG_TOUCHSCREEN_USB_E2I {USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I}, #endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC + {USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH + {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH}, +#endif + {} }; @@ -538,6 +559,19 @@ static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) } #endif +/***************************************************************************** + * ET&T TC5UH part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH +static int tc5uh_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} +#endif /***************************************************************************** * IdealTEK URTC1000 Part @@ -621,6 +655,39 @@ static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt) } #endif +/***************************************************************************** + * Zytronic Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC +static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + switch (pkt[0]) { + case 0x3A: /* command response */ + dbg("%s: Command response %d", __func__, pkt[1]); + break; + + case 0xC0: /* down */ + dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); + dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); + dev->touch = 1; + dbg("%s: down %d,%d", __func__, dev->x, dev->y); + return 1; + + case 0x80: /* up */ + dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); + dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); + dev->touch = 0; + dbg("%s: up %d,%d", __func__, dev->x, dev->y); + return 1; + + default: + dbg("%s: Unknown return %d", __func__, pkt[0]); + break; + } + + return 0; +} +#endif /***************************************************************************** * the different device descriptors @@ -783,6 +850,29 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .read_data = e2i_read_data, }, #endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC + [DEVTYPE_ZYTRONIC] = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 5, + .read_data = zytronic_read_data, + .irq_always = true, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH + [DEVTYPE_TC5UH] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 5, + .read_data = tc5uh_read_data, + }, +#endif }; @@ -933,8 +1023,10 @@ static int usbtouch_open(struct input_dev *input) usbtouch->irq->dev = usbtouch->udev; - if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) - return -EIO; + if (!usbtouch->type->irq_always) { + if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) + return -EIO; + } return 0; } @@ -943,7 +1035,8 @@ static void usbtouch_close(struct input_dev *input) { struct usbtouch_usb *usbtouch = input_get_drvdata(input); - usb_kill_urb(usbtouch->irq); + if (!usbtouch->type->irq_always) + usb_kill_urb(usbtouch->irq); } @@ -1066,6 +1159,9 @@ static int usbtouch_probe(struct usb_interface *intf, usb_set_intfdata(intf, usbtouch); + if (usbtouch->type->irq_always) + usb_submit_urb(usbtouch->irq, GFP_KERNEL); + return 0; out_free_buffers: @@ -1087,7 +1183,7 @@ static void usbtouch_disconnect(struct usb_interface *intf) dbg("%s - usbtouch is initialized, cleaning up", __func__); usb_set_intfdata(intf, NULL); - usb_kill_urb(usbtouch->irq); + /* this will stop IO via close */ input_unregister_device(usbtouch->input); usb_free_urb(usbtouch->irq); usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch); diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c index fa294b6d600..85fd9421be9 100644 --- a/drivers/mfd/ucb1400_core.c +++ b/drivers/mfd/ucb1400_core.c @@ -51,6 +51,7 @@ static int ucb1400_core_probe(struct device *dev) struct ucb1400_ts ucb_ts; struct ucb1400_gpio ucb_gpio; struct snd_ac97 *ac97; + struct ucb1400_pdata *pdata = dev->platform_data; memset(&ucb_ts, 0, sizeof(ucb_ts)); memset(&ucb_gpio, 0, sizeof(ucb_gpio)); @@ -88,6 +89,12 @@ static int ucb1400_core_probe(struct device *dev) /* TOUCHSCREEN */ ucb_ts.ac97 = ac97; + + if (pdata != NULL && pdata->irq >= 0) + ucb_ts.irq = pdata->irq; + else + ucb_ts.irq = -1; + ucb->ucb1400_ts = platform_device_alloc("ucb1400_ts", -1); if (!ucb->ucb1400_ts) { err = -ENOMEM; diff --git a/include/linux/input-polldev.h b/include/linux/input-polldev.h index 597a0077b3c..5e3dddf8f56 100644 --- a/include/linux/input-polldev.h +++ b/include/linux/input-polldev.h @@ -14,12 +14,19 @@ /** * struct input_polled_dev - simple polled input device - * @private: private driver data - * @flush: driver-supplied method that flushes device's state upon - * opening (optional) + * @private: private driver data. + * @open: driver-supplied method that prepares device for polling + * (enabled the device and maybe flushes device state). + * @close: driver-supplied method that is called when device is no + * longer being polled. Used to put device into low power mode. * @poll: driver-supplied method that polls the device and posts * input events (mandatory). - * @poll_interval: specifies how often the poll() method shoudl be called. + * @poll_interval: specifies how often the poll() method should be called. + * Defaults to 500 msec unless overriden when registering the device. + * @poll_interval_max: specifies upper bound for the poll interval. + * Defaults to the initial value of @poll_interval. + * @poll_interval_min: specifies lower bound for the poll interval. + * Defaults to 0. * @input: input device structire associated with the polled device. * Must be properly initialized by the driver (id, name, phys, bits). * @@ -30,11 +37,16 @@ struct input_polled_dev { void *private; - void (*flush)(struct input_polled_dev *dev); + void (*open)(struct input_polled_dev *dev); + void (*close)(struct input_polled_dev *dev); void (*poll)(struct input_polled_dev *dev); unsigned int poll_interval; /* msec */ + unsigned int poll_interval_max; /* msec */ + unsigned int poll_interval_min; /* msec */ struct input_dev *input; + +/* private: */ struct delayed_work work; }; diff --git a/include/linux/input.h b/include/linux/input.h index 84b501ab0d8..7be8a6537b5 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -895,7 +895,7 @@ struct ff_periodic_effect { struct ff_envelope envelope; __u32 custom_len; - __s16 *custom_data; + __s16 __user *custom_data; }; /** @@ -1021,9 +1021,12 @@ struct ff_effect { * @keycodesize: size of elements in keycode table * @keycode: map of scancodes to keycodes for this device * @setkeycode: optional method to alter current keymap, used to implement - * sparse keymaps. If not supplied default mechanism will be used + * sparse keymaps. If not supplied default mechanism will be used. + * The method is being called while holding event_lock and thus must + * not sleep * @getkeycode: optional method to retrieve current keymap. If not supplied - * default mechanism will be used + * default mechanism will be used. The method is being called while + * holding event_lock and thus must not sleep * @ff: force feedback structure associated with the device if device * supports force feedback effects * @repeat_key: stores key code of the last key pressed; used to implement @@ -1040,6 +1043,7 @@ struct ff_effect { * @absmin: minimum values for events coming from absolute axes * @absfuzz: describes noisiness for axes * @absflat: size of the center flat position (used by joydev) + * @absres: resolution used for events coming form absolute axes * @open: this method is called when the very first user calls * input_open_device(). The driver must prepare the device * to start generating events (start polling thread, @@ -1294,6 +1298,9 @@ void input_unregister_device(struct input_dev *); int __must_check input_register_handler(struct input_handler *); void input_unregister_handler(struct input_handler *); +int input_handler_for_each_handle(struct input_handler *, void *data, + int (*fn)(struct input_handle *, void *)); + int input_register_handle(struct input_handle *); void input_unregister_handle(struct input_handle *); diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index b3cd42d50e1..3bd018baae2 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -41,6 +41,9 @@ struct matrix_keymap_data { * @col_scan_delay_us: delay, measured in microseconds, that is * needed before we can keypad after activating column gpio * @debounce_ms: debounce interval in milliseconds + * @active_low: gpio polarity + * @wakeup: controls whether the device should be set up as wakeup + * source * * This structure represents platform-specific data that use used by * matrix_keypad driver to perform proper initialization. diff --git a/include/linux/input/sparse-keymap.h b/include/linux/input/sparse-keymap.h new file mode 100644 index 00000000000..52db62064c6 --- /dev/null +++ b/include/linux/input/sparse-keymap.h @@ -0,0 +1,62 @@ +#ifndef _SPARSE_KEYMAP_H +#define _SPARSE_KEYMAP_H + +/* + * Copyright (c) 2009 Dmitry Torokhov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#define KE_END 0 /* Indicates end of keymap */ +#define KE_KEY 1 /* Ordinary key/button */ +#define KE_SW 2 /* Switch (predetermined value) */ +#define KE_VSW 3 /* Switch (value supplied at runtime) */ +#define KE_IGNORE 4 /* Known entry that should be ignored */ +#define KE_LAST KE_IGNORE + +/** + * struct key_entry - keymap entry for use in sparse keymap + * @type: Type of the key entry (KE_KEY, KE_SW, KE_VSW, KE_END); + * drivers are allowed to extend the list with their own + * private definitions. + * @code: Device-specific data identifying the button/switch + * @keycode: KEY_* code assigned to a key/button + * @sw.code: SW_* code assigned to a switch + * @sw.value: Value that should be sent in an input even when KE_SW + * switch is toggled. KE_VSW switches ignore this field and + * expect driver to supply value for the event. + * + * This structure defines an entry in a sparse keymap used by some + * input devices for which traditional table-based approach is not + * suitable. + */ +struct key_entry { + int type; /* See KE_* above */ + u32 code; + union { + u16 keycode; /* For KE_KEY */ + struct { /* For KE_SW, KE_VSW */ + u8 code; + u8 value; /* For KE_SW, ignored by KE_VSW */ + } sw; + }; +}; + +struct key_entry *sparse_keymap_entry_from_scancode(struct input_dev *dev, + unsigned int code); +struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev, + unsigned int code); +int sparse_keymap_setup(struct input_dev *dev, + const struct key_entry *keymap, + int (*setup)(struct input_dev *, struct key_entry *)); +void sparse_keymap_free(struct input_dev *dev); + +void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke, + unsigned int value, bool autorelease); + +bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code, + unsigned int value, bool autorelease); + +#endif /* _SPARSE_KEYMAP_H */ diff --git a/include/linux/serio.h b/include/linux/serio.h index a640bc2afe7..e2f3044d4a4 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -215,5 +215,6 @@ static inline void serio_unpin_driver(struct serio *serio) #define SERIO_INEXIO 0x37 #define SERIO_TOUCHIT213 0x38 #define SERIO_W8001 0x39 +#define SERIO_DYNAPRO 0x3a #endif diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h index adb44066680..1b479091105 100644 --- a/include/linux/ucb1400.h +++ b/include/linux/ucb1400.h @@ -110,6 +110,10 @@ struct ucb1400 { struct platform_device *ucb1400_gpio; }; +struct ucb1400_pdata { + int irq; +}; + static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg) { return ac97->bus->ops->read(ac97, reg); |