diff options
-rw-r--r-- | arch/x86/include/asm/apic.h | 7 | ||||
-rw-r--r-- | arch/x86/include/asm/apicdef.h | 3 | ||||
-rw-r--r-- | arch/x86/include/asm/io_apic.h | 13 | ||||
-rw-r--r-- | arch/x86/kernel/acpi/boot.c | 105 | ||||
-rw-r--r-- | arch/x86/kernel/apic/apic.c | 110 | ||||
-rw-r--r-- | arch/x86/kernel/apic/es7000_32.c | 2 | ||||
-rw-r--r-- | arch/x86/kernel/apic/io_apic.c | 324 | ||||
-rw-r--r-- | arch/x86/kernel/apic/probe_64.c | 6 | ||||
-rw-r--r-- | arch/x86/kernel/mpparse.c | 10 |
9 files changed, 269 insertions, 311 deletions
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index bb7d4792584..586b7adb8e5 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -183,6 +183,10 @@ static inline int x2apic_enabled(void) } #define x2apic_supported() (cpu_has_x2apic) +static inline void x2apic_force_phys(void) +{ + x2apic_phys = 1; +} #else static inline void check_x2apic(void) { @@ -194,6 +198,9 @@ static inline int x2apic_enabled(void) { return 0; } +static inline void x2apic_force_phys(void) +{ +} #define x2apic_preenabled 0 #define x2apic_supported() 0 diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index 7ddb36ab933..7386bfa4f4b 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -8,7 +8,8 @@ * Ingo Molnar <mingo@redhat.com>, 1999, 2000 */ -#define APIC_DEFAULT_PHYS_BASE 0xfee00000 +#define IO_APIC_DEFAULT_PHYS_BASE 0xfec00000 +#define APIC_DEFAULT_PHYS_BASE 0xfee00000 #define APIC_ID 0x20 diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 330ee807f89..85232d32fcb 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -150,11 +150,10 @@ extern int timer_through_8259; #define io_apic_assign_pci_irqs \ (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs) -#ifdef CONFIG_ACPI +extern u8 io_apic_unique_id(u8 id); extern int io_apic_get_unique_id(int ioapic, int apic_id); extern int io_apic_get_version(int ioapic); extern int io_apic_get_redir_entries(int ioapic); -#endif /* CONFIG_ACPI */ struct io_apic_irq_attr; extern int io_apic_set_pci_routing(struct device *dev, int irq, @@ -177,6 +176,16 @@ extern int setup_ioapic_entry(int apic, int irq, int polarity, int vector, int pin); extern void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e); + +struct mp_ioapic_gsi{ + int gsi_base; + int gsi_end; +}; +extern struct mp_ioapic_gsi mp_gsi_routing[]; +int mp_find_ioapic(int gsi); +int mp_find_ioapic_pin(int ioapic, int gsi); +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base); + #else /* !CONFIG_X86_IO_APIC */ #define io_apic_assign_pci_irqs 0 static const int timer_through_8259 = 0; diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6b8ca3a0285..67e929b8987 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -833,106 +833,6 @@ static int __init acpi_parse_madt_lapic_entries(void) extern int es7000_plat; #endif -static struct { - int gsi_base; - int gsi_end; -} mp_ioapic_routing[MAX_IO_APICS]; - -int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -int mp_find_ioapic_pin(int ioapic, int gsi) -{ - if (WARN_ON(ioapic == -1)) - return -1; - if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end)) - return -1; - - return gsi - mp_ioapic_routing[ioapic].gsi_base; -} - -static u8 __init uniq_ioapic_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -#endif -} - -static int bad_ioapic(unsigned long address) -{ - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " - "(found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!\n"); - } - if (!address) { - printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" - " found in table, skipping!\n"); - return 1; - } - return 0; -} - -void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].type = MP_IOAPIC; - mp_ioapics[idx].flags = MPC_APIC_USABLE; - mp_ioapics[idx].apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].apicid = uniq_ioapic_id(id); - mp_ioapics[idx].apicver = io_apic_get_version(idx); - - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].apicid, - mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr, - mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - int __init acpi_probe_gsi(void) { int idx; @@ -947,7 +847,7 @@ int __init acpi_probe_gsi(void) max_gsi = 0; for (idx = 0; idx < nr_ioapics; idx++) { - gsi = mp_ioapic_routing[idx].gsi_end; + gsi = mp_gsi_routing[idx].gsi_end; if (gsi > max_gsi) max_gsi = gsi; @@ -1179,9 +1079,8 @@ static int __init acpi_parse_madt_ioapic_entries(void) * If MPS is present, it will handle them, * otherwise the system will stay in PIC mode */ - if (acpi_disabled || acpi_noirq) { + if (acpi_disabled || acpi_noirq) return -ENODEV; - } if (!cpu_has_apic) return -ENODEV; diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 0a1c2830ec6..159740decc4 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -49,6 +49,7 @@ #include <asm/mtrr.h> #include <asm/smp.h> #include <asm/mce.h> +#include <asm/kvm_para.h> unsigned int num_processors; @@ -1361,52 +1362,80 @@ void enable_x2apic(void) } #endif /* CONFIG_X86_X2APIC */ -void __init enable_IR_x2apic(void) +int __init enable_IR(void) { #ifdef CONFIG_INTR_REMAP - int ret; - unsigned long flags; - struct IO_APIC_route_entry **ioapic_entries = NULL; - - ret = dmar_table_init(); - if (ret) { - pr_debug("dmar_table_init() failed with %d:\n", ret); - goto ir_failed; - } - if (!intr_remapping_supported()) { pr_debug("intr-remapping not supported\n"); - goto ir_failed; + return 0; } - if (!x2apic_preenabled && skip_ioapic_setup) { pr_info("Skipped enabling intr-remap because of skipping " "io-apic setup\n"); - return; + return 0; } + if (enable_intr_remapping(x2apic_supported())) + return 0; + + pr_info("Enabled Interrupt-remapping\n"); + + return 1; + +#endif + return 0; +} + +void __init enable_IR_x2apic(void) +{ + unsigned long flags; + struct IO_APIC_route_entry **ioapic_entries = NULL; + int ret, x2apic_enabled = 0; + int dmar_table_init_ret = 0; + +#ifdef CONFIG_INTR_REMAP + dmar_table_init_ret = dmar_table_init(); + if (dmar_table_init_ret) + pr_debug("dmar_table_init() failed with %d:\n", + dmar_table_init_ret); +#endif + ioapic_entries = alloc_ioapic_entries(); if (!ioapic_entries) { - pr_info("Allocate ioapic_entries failed: %d\n", ret); - goto end; + pr_err("Allocate ioapic_entries failed\n"); + goto out; } ret = save_IO_APIC_setup(ioapic_entries); if (ret) { pr_info("Saving IO-APIC state failed: %d\n", ret); - goto end; + goto out; } local_irq_save(flags); - mask_IO_APIC_setup(ioapic_entries); mask_8259A(); + mask_IO_APIC_setup(ioapic_entries); - ret = enable_intr_remapping(x2apic_supported()); - if (ret) - goto end_restore; + if (dmar_table_init_ret) + ret = 0; + else + ret = enable_IR(); - pr_info("Enabled Interrupt-remapping\n"); + if (!ret) { + /* IR is required if there is APIC ID > 255 even when running + * under KVM + */ + if (max_physical_apicid > 255 || !kvm_para_available()) + goto nox2apic; + /* + * without IR all CPUs can be addressed by IOAPIC/MSI + * only in physical mode + */ + x2apic_force_phys(); + } + + x2apic_enabled = 1; if (x2apic_supported() && !x2apic_mode) { x2apic_mode = 1; @@ -1414,41 +1443,25 @@ void __init enable_IR_x2apic(void) pr_info("Enabled x2apic\n"); } -end_restore: - if (ret) - /* - * IR enabling failed - */ +nox2apic: + if (!ret) /* IR enabling failed */ restore_IO_APIC_setup(ioapic_entries); - unmask_8259A(); local_irq_restore(flags); -end: +out: if (ioapic_entries) free_ioapic_entries(ioapic_entries); - if (!ret) + if (x2apic_enabled) return; -ir_failed: if (x2apic_preenabled) - panic("x2apic enabled by bios. But IR enabling failed"); + panic("x2apic: enabled by BIOS but kernel init failed."); else if (cpu_has_x2apic) - pr_info("Not enabling x2apic,Intr-remapping\n"); -#else - if (!cpu_has_x2apic) - return; - - if (x2apic_preenabled) - panic("x2apic enabled prior OS handover," - " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP"); -#endif - - return; + pr_info("Not enabling x2apic, Intr-remapping init failed.\n"); } - #ifdef CONFIG_X86_64 /* * Detect and enable local APICs on non-SMP boards. @@ -1549,8 +1562,6 @@ no_apic: #ifdef CONFIG_X86_64 void __init early_init_lapic_mapping(void) { - unsigned long phys_addr; - /* * If no local APIC can be found then go out * : it means there is no mpatable and MADT @@ -1558,11 +1569,9 @@ void __init early_init_lapic_mapping(void) if (!smp_found_config) return; - phys_addr = mp_lapic_addr; - - set_fixmap_nocache(FIX_APIC_BASE, phys_addr); + set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, phys_addr); + APIC_BASE, mp_lapic_addr); /* * Fetch the APIC ID of the BSP in case we have a @@ -1651,7 +1660,6 @@ int __init APIC_init_uniprocessor(void) APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { pr_err("BIOS bug, local APIC 0x%x not detected!...\n", boot_cpu_physical_apicid); - clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); return -1; } #endif diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 8952a589028..89174f847b4 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -167,7 +167,7 @@ static int es7000_apic_is_cluster(void) { /* MPENTIUMIII */ if (boot_cpu_data.x86 == 6 && - (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11)) + (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11)) return 1; return 0; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index d2ed6c5ddc8..3c8f9e75d03 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -66,6 +66,8 @@ #include <asm/apic.h> #define __apicdebuginit(type) static type __init +#define for_each_irq_pin(entry, head) \ + for (entry = head; entry; entry = entry->next) /* * Is the SiS APIC rmw bug present ? @@ -85,6 +87,9 @@ int nr_ioapic_registers[MAX_IO_APICS]; struct mpc_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; +/* IO APIC gsi routing info */ +struct mp_ioapic_gsi mp_gsi_routing[MAX_IO_APICS]; + /* MP IRQ source entries */ struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; @@ -116,15 +121,6 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); -struct irq_pin_list; - -/* - * This is performance-critical, we want to do it O(1) - * - * the indexing order of this array favors 1:1 mappings - * between pins and IRQs. - */ - struct irq_pin_list { int apic, pin; struct irq_pin_list *next; @@ -139,6 +135,11 @@ static struct irq_pin_list *get_one_free_irq_2_pin(int node) return pin; } +/* + * This is performance-critical, we want to do it O(1) + * + * Most irqs are mapped 1:1 with pins. + */ struct irq_cfg { struct irq_pin_list *irq_2_pin; cpumask_var_t domain; @@ -414,13 +415,10 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg) unsigned long flags; spin_lock_irqsave(&ioapic_lock, flags); - entry = cfg->irq_2_pin; - for (;;) { + for_each_irq_pin(entry, cfg->irq_2_pin) { unsigned int reg; int pin; - if (!entry) - break; pin = entry->pin; reg = io_apic_read(entry->apic, 0x10 + pin*2); /* Is the remote IRR bit set? */ @@ -428,9 +426,6 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg) spin_unlock_irqrestore(&ioapic_lock, flags); return true; } - if (!entry->next) - break; - entry = entry->next; } spin_unlock_irqrestore(&ioapic_lock, flags); @@ -498,72 +493,68 @@ static void ioapic_mask_entry(int apic, int pin) * shared ISA-space IRQs, so we have to support them. We are super * fast in the common case, and fast for shared ISA-space IRQs. */ -static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) +static int +add_pin_to_irq_node_nopanic(struct irq_cfg *cfg, int node, int apic, int pin) { - struct irq_pin_list *entry; + struct irq_pin_list **last, *entry; - entry = cfg->irq_2_pin; - if (!entry) { - entry = get_one_free_irq_2_pin(node); - if (!entry) { - printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n", - apic, pin); - return; - } - cfg->irq_2_pin = entry; - entry->apic = apic; - entry->pin = pin; - return; - } - - while (entry->next) { - /* not again, please */ + /* don't allow duplicates */ + last = &cfg->irq_2_pin; + for_each_irq_pin(entry, cfg->irq_2_pin) { if (entry->apic == apic && entry->pin == pin) - return; - - entry = entry->next; + return 0; + last = &entry->next; } - entry->next = get_one_free_irq_2_pin(node); - entry = entry->next; + entry = get_one_free_irq_2_pin(node); + if (!entry) { + printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n", + node, apic, pin); + return -ENOMEM; + } entry->apic = apic; entry->pin = pin; + + *last = entry; + return 0; +} + +static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) +{ + if (add_pin_to_irq_node_nopanic(cfg, node, apic, pin)) + panic("IO-APIC: failed to add irq-pin. Can not proceed\n"); } /* * Reroute an IRQ to a different pin. */ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, - int oldapic, int oldpin, - int newapic, int newpin) + int oldapic, int oldpin, + int newapic, int newpin) { - struct irq_pin_list *entry = cfg->irq_2_pin; - int replaced = 0; + struct irq_pin_list *entry; - while (entry) { + for_each_irq_pin(entry, cfg->irq_2_pin) { if (entry->apic == oldapic && entry->pin == oldpin) { entry->apic = newapic; entry->pin = newpin; - replaced = 1; /* every one is different, right? */ - break; + return; } - entry = entry->next; } - /* why? call replace before add? */ - if (!replaced) - add_pin_to_irq_node(cfg, node, newapic, newpin); + /* old apic/pin didn't exist, so just add new ones */ + add_pin_to_irq_node(cfg, node, newapic, newpin); } -static inline void io_apic_modify_irq(struct irq_cfg *cfg, - int mask_and, int mask_or, - void (*final)(struct irq_pin_list *entry)) +static void io_apic_modify_irq(struct irq_cfg *cfg, + int mask_and, int mask_or, + void (*final)(struct irq_pin_list *entry)) { int pin; struct irq_pin_list *entry; - for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) { + for_each_irq_pin(entry, cfg->irq_2_pin) { unsigned int reg; pin = entry->pin; reg = io_apic_read(entry->apic, 0x10 + pin * 2); @@ -580,7 +571,6 @@ static void __unmask_IO_APIC_irq(struct irq_cfg *cfg) io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL); } -#ifdef CONFIG_X86_64 static void io_apic_sync(struct irq_pin_list *entry) { /* @@ -596,11 +586,6 @@ static void __mask_IO_APIC_irq(struct irq_cfg *cfg) { io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync); } -#else /* CONFIG_X86_32 */ -static void __mask_IO_APIC_irq(struct irq_cfg *cfg) -{ - io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL); -} static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg) { @@ -613,7 +598,6 @@ static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg) io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, IO_APIC_REDIR_LEVEL_TRIGGER, NULL); } -#endif /* CONFIG_X86_32 */ static void mask_IO_APIC_irq_desc(struct irq_desc *desc) { @@ -1702,12 +1686,8 @@ __apicdebuginit(void) print_IO_APIC(void) if (!entry) continue; printk(KERN_DEBUG "IRQ%d ", irq); - for (;;) { + for_each_irq_pin(entry, cfg->irq_2_pin) printk("-> %d:%d", entry->apic, entry->pin); - if (!entry->next) - break; - entry = entry->next; - } printk("\n"); } @@ -2211,7 +2191,6 @@ static unsigned int startup_ioapic_irq(unsigned int irq) return was_pending; } -#ifdef CONFIG_X86_64 static int ioapic_retrigger_irq(unsigned int irq) { @@ -2224,14 +2203,6 @@ static int ioapic_retrigger_irq(unsigned int irq) return 1; } -#else -static int ioapic_retrigger_irq(unsigned int irq) -{ - apic->send_IPI_self(irq_cfg(irq)->vector); - - return 1; -} -#endif /* * Level and edge triggered IO-APIC interrupts need different handling, @@ -2269,13 +2240,9 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq struct irq_pin_list *entry; u8 vector = cfg->vector; - entry = cfg->irq_2_pin; - for (;;) { + for_each_irq_pin(entry, cfg->irq_2_pin) { unsigned int reg; - if (!entry) - break; - apic = entry->apic; pin = entry->pin; /* @@ -2288,9 +2255,6 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; io_apic_modify(apic, 0x10 + pin*2, reg); - if (!entry->next) - break; - entry = entry->next; } } @@ -2515,11 +2479,8 @@ atomic_t irq_mis_count; static void ack_apic_level(unsigned int irq) { struct irq_desc *desc = irq_to_desc(irq); - -#ifdef CONFIG_X86_32 unsigned long v; int i; -#endif struct irq_cfg *cfg; int do_unmask_irq = 0; @@ -2532,31 +2493,28 @@ static void ack_apic_level(unsigned int irq) } #endif -#ifdef CONFIG_X86_32 /* - * It appears there is an erratum which affects at least version 0x11 - * of I/O APIC (that's the 82093AA and cores integrated into various - * chipsets). Under certain conditions a level-triggered interrupt is - * erroneously delivered as edge-triggered one but the respective IRR - * bit gets set nevertheless. As a result the I/O unit expects an EOI - * message but it will never arrive and further interrupts are blocked - * from the source. The exact reason is so far unknown, but the - * phenomenon was observed when two consecutive interrupt requests - * from a given source get delivered to the same CPU and the source is - * temporarily disabled in between. - * - * A workaround is to simulate an EOI message manually. We achieve it - * by setting the trigger mode to edge and then to level when the edge - * trigger mode gets detected in the TMR of a local APIC for a - * level-triggered interrupt. We mask the source for the time of the - * operation to prevent an edge-triggered interrupt escaping meanwhile. - * The idea is from Manfred Spraul. --macro - */ + * It appears there is an erratum which affects at least version 0x11 + * of I/O APIC (that's the 82093AA and cores integrated into various + * chipsets). Under certain conditions a level-triggered interrupt is + * erroneously delivered as edge-triggered one but the respective IRR + * bit gets set nevertheless. As a result the I/O unit expects an EOI + * message but it will never arrive and further interrupts are blocked + * from the source. The exact reason is so far unknown, but the + * phenomenon was observed when two consecutive interrupt requests + * from a given source get delivered to the same CPU and the source is + * temporarily disabled in between. + * + * A workaround is to simulate an EOI message manually. We achieve it + * by setting the trigger mode to edge and then to level when the edge + * trigger mode gets detected in the TMR of a local APIC for a + * level-triggered interrupt. We mask the source for the time of the + * operation to prevent an edge-triggered interrupt escaping meanwhile. + * The idea is from Manfred Spraul. --macro + */ cfg = desc->chip_data; i = cfg->vector; - v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); -#endif /* * We must acknowledge the irq before we move it or the acknowledge will @@ -2598,7 +2556,7 @@ static void ack_apic_level(unsigned int irq) unmask_IO_APIC_irq_desc(desc); } -#ifdef CONFIG_X86_32 + /* Tail end of version 0x11 I/O APIC bug workaround */ if (!(v & (1 << (i & 0x1f)))) { atomic_inc(&irq_mis_count); spin_lock(&ioapic_lock); @@ -2606,26 +2564,15 @@ static void ack_apic_level(unsigned int irq) __unmask_and_level_IO_APIC_irq(cfg); spin_unlock(&ioapic_lock); } -#endif } #ifdef CONFIG_INTR_REMAP static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) { - int apic, pin; struct irq_pin_list *entry; - entry = cfg->irq_2_pin; - for (;;) { - - if (!entry) - break; - - apic = entry->apic; - pin = entry->pin; - io_apic_eoi(apic, pin); - entry = entry->next; - } + for_each_irq_pin(entry, cfg->irq_2_pin) + io_apic_eoi(entry->apic, entry->pin); } static void @@ -3241,8 +3188,7 @@ void destroy_irq(unsigned int irq) cfg = desc->chip_data; dynamic_irq_cleanup(irq); /* connect back irq_cfg */ - if (desc) - desc->chip_data = cfg; + desc->chip_data = cfg; free_irte(irq); spin_lock_irqsave(&vector_lock, flags); @@ -3912,7 +3858,11 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq, */ if (irq >= NR_IRQS_LEGACY) { cfg = desc->chip_data; - add_pin_to_irq_node(cfg, node, ioapic, pin); + if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) { + printk(KERN_INFO "can not add pin %d for irq %d\n", + pin, irq); + return 0; + } } setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity); @@ -3941,11 +3891,28 @@ int io_apic_set_pci_routing(struct device *dev, int irq, return __io_apic_set_pci_routing(dev, irq, irq_attr); } -/* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration - -------------------------------------------------------------------------- */ +u8 __init io_apic_unique_id(u8 id) +{ +#ifdef CONFIG_X86_32 + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(nr_ioapics, id); + else + return id; +#else + int i; + DECLARE_BITMAP(used, 256); -#ifdef CONFIG_ACPI + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +#endif +} #ifdef CONFIG_X86_32 int __init io_apic_get_unique_id(int ioapic, int apic_id) @@ -4054,8 +4021,6 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return 0; } -#endif /* CONFIG_ACPI */ - /* * This function currently is only a helper for the i386 smp boot process where * we need to reprogram the ioredtbls to cater for the cpus which have come online @@ -4109,7 +4074,7 @@ void __init setup_ioapic_dest(void) static struct resource *ioapic_resources; -static struct resource * __init ioapic_setup_resources(void) +static struct resource * __init ioapic_setup_resources(int nr_ioapics) { unsigned long n; struct resource *res; @@ -4125,15 +4090,13 @@ static struct resource * __init ioapic_setup_resources(void) mem = alloc_bootmem(n); res = (void *)mem; - if (mem != NULL) { - mem += sizeof(struct resource) * nr_ioapics; + mem += sizeof(struct resource) * nr_ioapics; - for (i = 0; i < nr_ioapics; i++) { - res[i].name = mem; - res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; - sprintf(mem, "IOAPIC %u", i); - mem += IOAPIC_RESOURCE_NAME_SIZE; - } + for (i = 0; i < nr_ioapics; i++) { + res[i].name = mem; + res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; + sprintf(mem, "IOAPIC %u", i); + mem += IOAPIC_RESOURCE_NAME_SIZE; } ioapic_resources = res; @@ -4147,7 +4110,7 @@ void __init ioapic_init_mappings(void) struct resource *ioapic_res; int i; - ioapic_res = ioapic_setup_resources(); + ioapic_res = ioapic_setup_resources(nr_ioapics); for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { ioapic_phys = mp_ioapics[i].apicaddr; @@ -4176,11 +4139,9 @@ fake_ioapic_page: __fix_to_virt(idx), ioapic_phys); idx++; - if (ioapic_res != NULL) { - ioapic_res->start = ioapic_phys; - ioapic_res->end = ioapic_phys + (4 * 1024) - 1; - ioapic_res++; - } + ioapic_res->start = ioapic_phys; + ioapic_res->end = ioapic_phys + (4 * 1024) - 1; + ioapic_res++; } } @@ -4201,3 +4162,76 @@ void __init ioapic_insert_resources(void) r++; } } + +int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_gsi_routing[i].gsi_base) + && (gsi <= mp_gsi_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +int mp_find_ioapic_pin(int ioapic, int gsi) +{ + if (WARN_ON(ioapic == -1)) + return -1; + if (WARN_ON(gsi > mp_gsi_routing[ioapic].gsi_end)) + return -1; + + return gsi - mp_gsi_routing[ioapic].gsi_base; +} + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded " + "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics); + return 1; + } + if (!address) { + printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].type = MP_IOAPIC; + mp_ioapics[idx].flags = MPC_APIC_USABLE; + mp_ioapics[idx].apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + mp_ioapics[idx].apicid = io_apic_unique_id(id); + mp_ioapics[idx].apicver = io_apic_get_version(idx); + + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + mp_gsi_routing[idx].gsi_base = gsi_base; + mp_gsi_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].apicid, + mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr, + mp_gsi_routing[idx].gsi_base, mp_gsi_routing[idx].gsi_end); + + nr_ioapics++; +} diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index fcec2f1d34a..65edc180fc8 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -55,11 +55,11 @@ static int apicid_phys_pkg_id(int initial_apic_id, int index_msb) void __init default_setup_apic_routing(void) { #ifdef CONFIG_X86_X2APIC - if (x2apic_mode && (apic != &apic_x2apic_phys && + if (x2apic_mode #ifdef CONFIG_X86_UV - apic != &apic_x2apic_uv_x && + && apic != &apic_x2apic_uv_x #endif - apic != &apic_x2apic_cluster)) { + ) { if (x2apic_phys) apic = &apic_x2apic_phys; else diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 651c93b2886..fcd513bf284 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -482,11 +482,11 @@ static void __init construct_ioapic_table(int mpc_default_type) MP_bus_info(&bus); } - ioapic.type = MP_IOAPIC; - ioapic.apicid = 2; - ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01; - ioapic.flags = MPC_APIC_USABLE; - ioapic.apicaddr = 0xFEC00000; + ioapic.type = MP_IOAPIC; + ioapic.apicid = 2; + ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01; + ioapic.flags = MPC_APIC_USABLE; + ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE; MP_ioapic_info(&ioapic); /* |