summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/usb/core/hub.c51
-rw-r--r--drivers/usb/host/xhci-ring.c40
-rw-r--r--drivers/usb/host/xhci.h1
-rw-r--r--include/linux/usb/hcd.h2
4 files changed, 74 insertions, 20 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index ba9509454ed..1c32bbac986 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -62,6 +62,8 @@ struct usb_hub {
resumed */
unsigned long removed_bits[1]; /* ports with a "removed"
device present */
+ unsigned long wakeup_bits[1]; /* ports that have signaled
+ remote wakeup */
#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
#error event_bits[] is too short!
#endif
@@ -411,6 +413,29 @@ void usb_kick_khubd(struct usb_device *hdev)
kick_khubd(hub);
}
+/*
+ * Let the USB core know that a USB 3.0 device has sent a Function Wake Device
+ * Notification, which indicates it had initiated remote wakeup.
+ *
+ * USB 3.0 hubs do not report the port link state change from U3 to U0 when the
+ * device initiates resume, so the USB core will not receive notice of the
+ * resume through the normal hub interrupt URB.
+ */
+void usb_wakeup_notification(struct usb_device *hdev,
+ unsigned int portnum)
+{
+ struct usb_hub *hub;
+
+ if (!hdev)
+ return;
+
+ hub = hdev_to_hub(hdev);
+ if (hub) {
+ set_bit(portnum, hub->wakeup_bits);
+ kick_khubd(hub);
+ }
+}
+EXPORT_SYMBOL_GPL(usb_wakeup_notification);
/* completion function, fires on port status changes and various faults */
static void hub_irq(struct urb *urb)
@@ -807,12 +832,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_ENABLE);
}
- if (portchange & USB_PORT_STAT_C_LINK_STATE) {
- need_debounce_delay = true;
- clear_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_C_PORT_LINK_STATE);
- }
-
if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
hub_is_superspeed(hub->hdev)) {
need_debounce_delay = true;
@@ -3498,11 +3517,18 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
int ret;
hdev = hub->hdev;
- if (!(portchange & USB_PORT_STAT_C_SUSPEND))
- return 0;
- clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND);
-
udev = hdev->children[port-1];
+ if (!hub_is_superspeed(hdev)) {
+ if (!(portchange & USB_PORT_STAT_C_SUSPEND))
+ return 0;
+ clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND);
+ } else {
+ if (!udev || udev->state != USB_STATE_SUSPENDED ||
+ !test_and_clear_bit(udev->portnum,
+ hub->wakeup_bits))
+ return 0;
+ }
+
if (udev) {
/* TRSMRCY = 10 msec */
msleep(10);
@@ -3533,7 +3559,7 @@ static void hub_events(void)
u16 portstatus;
u16 portchange;
int i, ret;
- int connect_change;
+ int connect_change, wakeup_change;
/*
* We restart the list every time to avoid a deadlock with
@@ -3612,8 +3638,9 @@ static void hub_events(void)
if (test_bit(i, hub->busy_bits))
continue;
connect_change = test_bit(i, hub->change_bits);
+ wakeup_change = test_bit(i, hub->wakeup_bits);
if (!test_and_clear_bit(i, hub->event_bits) &&
- !connect_change)
+ !connect_change && !wakeup_change)
continue;
ret = hub_port_status(hub, i,
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index ffe549338ce..3a033240ec6 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1241,18 +1241,20 @@ static void handle_device_notification(struct xhci_hcd *xhci,
union xhci_trb *event)
{
u32 slot_id;
+ struct usb_device *udev;
slot_id = TRB_TO_SLOT_ID(event->generic.field[3]);
- if (!xhci->devs[slot_id])
+ if (!xhci->devs[slot_id]) {
xhci_warn(xhci, "Device Notification event for "
"unused slot %u\n", slot_id);
- else
- xhci_dbg(xhci, "Device Notification event for slot ID %u\n",
- slot_id);
- /* XXX should we kick khubd for the parent hub? It should have send an
- * interrupt transfer when the port started signaling resume, so there's
- * probably no need to do so.
- */
+ return;
+ }
+
+ xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
+ slot_id);
+ udev = xhci->devs[slot_id]->udev;
+ if (udev && udev->parent)
+ usb_wakeup_notification(udev->parent, udev->portnum);
}
static void handle_port_status(struct xhci_hcd *xhci,
@@ -1340,6 +1342,11 @@ static void handle_port_status(struct xhci_hcd *xhci,
if (DEV_SUPERSPEED(temp)) {
xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
+ /* Set a flag to say the port signaled remote wakeup,
+ * so we can tell the difference between the end of
+ * device and host initiated resume.
+ */
+ bus_state->port_remote_wakeup |= 1 << faked_port_index;
xhci_test_and_clear_bit(xhci, port_array,
faked_port_index, PORT_PLC);
xhci_set_link_state(xhci, port_array, faked_port_index,
@@ -1362,10 +1369,27 @@ static void handle_port_status(struct xhci_hcd *xhci,
if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 &&
DEV_SUPERSPEED(temp)) {
xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
+ /* We've just brought the device into U0 through either the
+ * Resume state after a device remote wakeup, or through the
+ * U3Exit state after a host-initiated resume. If it's a device
+ * initiated remote wake, don't pass up the link state change,
+ * so the roothub behavior is consistent with external
+ * USB 3.0 hub behavior.
+ */
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
faked_port_index + 1);
if (slot_id && xhci->devs[slot_id])
xhci_ring_device(xhci, slot_id);
+ if (bus_state->port_remote_wakeup && (1 << faked_port_index)) {
+ bus_state->port_remote_wakeup &=
+ ~(1 << faked_port_index);
+ xhci_test_and_clear_bit(xhci, port_array,
+ faked_port_index, PORT_PLC);
+ usb_wakeup_notification(hcd->self.root_hub,
+ faked_port_index + 1);
+ bogus_port_status = true;
+ goto cleanup;
+ }
}
if (hcd->speed != HCD_USB3)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index fb99c837914..0f493695610 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1344,6 +1344,7 @@ struct xhci_bus_state {
/* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
u32 port_c_suspend;
u32 suspended_ports;
+ u32 port_remote_wakeup;
unsigned long resume_done[USB_MAXCHILDREN];
};
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index b2f62f3a32a..2e6071efbfb 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -412,6 +412,8 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
extern void usb_hc_died(struct usb_hcd *hcd);
extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+extern void usb_wakeup_notification(struct usb_device *hdev,
+ unsigned int portnum);
/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 12:18:24 +0000