summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/mmc/core/mmc.c2
-rw-r--r--drivers/mmc/core/sd.c5
-rw-r--r--drivers/mmc/core/sdio.c2
-rw-r--r--drivers/mmc/host/sdhci-pci.c47
-rw-r--r--drivers/mmc/host/sdhci.c23
-rw-r--r--include/linux/mmc/host.h3
-rw-r--r--include/linux/mmc/sdhci.h4
-rw-r--r--include/linux/pci_ids.h2
8 files changed, 76 insertions, 12 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 77f93c3b880..76bb621e9aa 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -745,6 +745,8 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr)
WARN_ON(!host->claimed);
mmc_attach_bus_ops(host);
+ if (host->ocr_avail_mmc)
+ host->ocr_avail = host->ocr_avail_mmc;
/*
* We need to get OCR a different way for SPI.
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 49da4dffd28..de062ebd8b2 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -772,6 +772,8 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr)
WARN_ON(!host->claimed);
mmc_sd_attach_bus_ops(host);
+ if (host->ocr_avail_sd)
+ host->ocr_avail = host->ocr_avail_sd;
/*
* We need to get OCR a different way for SPI.
@@ -795,7 +797,8 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr)
ocr &= ~0x7F;
}
- if (ocr & MMC_VDD_165_195) {
+ if ((ocr & MMC_VDD_165_195) &&
+ !(host->ocr_avail_sd & MMC_VDD_165_195)) {
printk(KERN_WARNING "%s: SD card claims to support the "
"incompletely defined 'low voltage range'. This "
"will be ignored.\n", mmc_hostname(host));
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index efef5f94ac4..c18810ab646 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -700,6 +700,8 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
WARN_ON(!host->claimed);
mmc_attach_bus(host, &mmc_sdio_ops);
+ if (host->ocr_avail_sdio)
+ host->ocr_avail = host->ocr_avail_sdio;
/*
* Sanity check the voltages that the card claims to
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 831cf91b644..d2638ffc4ed 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -272,6 +272,7 @@ static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
static int jmicron_probe(struct sdhci_pci_chip *chip)
{
int ret;
+ u16 mmcdev = 0;
if (chip->pdev->revision == 0) {
chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR |
@@ -293,12 +294,17 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
* 2. The MMC interface has a lower subfunction number
* than the SD interface.
*/
- if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) {
+ if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD)
+ mmcdev = PCI_DEVICE_ID_JMICRON_JMB38X_MMC;
+ else if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_SD)
+ mmcdev = PCI_DEVICE_ID_JMICRON_JMB388_ESD;
+
+ if (mmcdev) {
struct pci_dev *sd_dev;
sd_dev = NULL;
while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON,
- PCI_DEVICE_ID_JMICRON_JMB38X_MMC, sd_dev)) != NULL) {
+ mmcdev, sd_dev)) != NULL) {
if ((PCI_SLOT(chip->pdev->devfn) ==
PCI_SLOT(sd_dev->devfn)) &&
(chip->pdev->bus == sd_dev->bus))
@@ -358,11 +364,21 @@ static int jmicron_probe_slot(struct sdhci_pci_slot *slot)
slot->host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
}
+ /* JM388 MMC doesn't support 1.8V while SD supports it */
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
+ slot->host->ocr_avail_sd = MMC_VDD_32_33 | MMC_VDD_33_34 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 |
+ MMC_VDD_165_195; /* allow 1.8V */
+ slot->host->ocr_avail_mmc = MMC_VDD_32_33 | MMC_VDD_33_34 |
+ MMC_VDD_29_30 | MMC_VDD_30_31; /* no 1.8V for MMC */
+ }
+
/*
* The secondary interface requires a bit set to get the
* interrupts.
*/
- if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC)
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+ slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD)
jmicron_enable_mmc(slot->host, 1);
return 0;
@@ -373,7 +389,8 @@ static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead)
if (dead)
return;
- if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC)
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+ slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD)
jmicron_enable_mmc(slot->host, 0);
}
@@ -381,7 +398,8 @@ static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state)
{
int i;
- if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) {
+ if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+ chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
for (i = 0;i < chip->num_slots;i++)
jmicron_enable_mmc(chip->slots[i]->host, 0);
}
@@ -393,7 +411,8 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
{
int ret, i;
- if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) {
+ if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+ chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
for (i = 0;i < chip->num_slots;i++)
jmicron_enable_mmc(chip->slots[i]->host, 1);
}
@@ -582,6 +601,22 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
},
{
+ .vendor = PCI_VENDOR_ID_JMICRON,
+ .device = PCI_DEVICE_ID_JMICRON_JMB388_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_jmicron,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_JMICRON,
+ .device = PCI_DEVICE_ID_JMICRON_JMB388_ESD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_jmicron,
+ },
+
+ {
.vendor = PCI_VENDOR_ID_SYSKONNECT,
.device = 0x8000,
.subvendor = PCI_ANY_ID,
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 8a74fcbfe13..55698864c2c 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1739,7 +1739,7 @@ EXPORT_SYMBOL_GPL(sdhci_alloc_host);
int sdhci_add_host(struct sdhci_host *host)
{
struct mmc_host *mmc;
- unsigned int caps;
+ unsigned int caps, ocr_avail;
int ret;
WARN_ON(host == NULL);
@@ -1893,13 +1893,26 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_card_is_removable(mmc))
mmc->caps |= MMC_CAP_NEEDS_POLL;
- mmc->ocr_avail = 0;
+ ocr_avail = 0;
if (caps & SDHCI_CAN_VDD_330)
- mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
+ ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
if (caps & SDHCI_CAN_VDD_300)
- mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
+ ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
if (caps & SDHCI_CAN_VDD_180)
- mmc->ocr_avail |= MMC_VDD_165_195;
+ ocr_avail |= MMC_VDD_165_195;
+
+ mmc->ocr_avail = ocr_avail;
+ mmc->ocr_avail_sdio = ocr_avail;
+ if (host->ocr_avail_sdio)
+ mmc->ocr_avail_sdio &= host->ocr_avail_sdio;
+ mmc->ocr_avail_sd = ocr_avail;
+ if (host->ocr_avail_sd)
+ mmc->ocr_avail_sd &= host->ocr_avail_sd;
+ else /* normal SD controllers don't support 1.8V */
+ mmc->ocr_avail_sd &= ~MMC_VDD_165_195;
+ mmc->ocr_avail_mmc = ocr_avail;
+ if (host->ocr_avail_mmc)
+ mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
if (mmc->ocr_avail == 0) {
printk(KERN_ERR "%s: Hardware doesn't report any "
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 381c77fd4dc..4a9d9d2589c 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -131,6 +131,9 @@ struct mmc_host {
unsigned int f_max;
unsigned int f_init;
u32 ocr_avail;
+ u32 ocr_avail_sdio; /* SDIO-specific OCR */
+ u32 ocr_avail_sd; /* SD-specific OCR */
+ u32 ocr_avail_mmc; /* MMC-specific OCR */
struct notifier_block pm_notify;
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 1fdc673f239..0d953f513d8 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -139,6 +139,10 @@ struct sdhci_host {
unsigned int caps; /* Alternative capabilities */
+ unsigned int ocr_avail_sdio; /* OCR bit masks */
+ unsigned int ocr_avail_sd;
+ unsigned int ocr_avail_mmc;
+
unsigned long private[0] ____cacheline_aligned;
};
#endif /* __SDHCI_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 7a58875cdad..2f17b4ccbb5 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2368,6 +2368,8 @@
#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381
#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
#define PCI_DEVICE_ID_JMICRON_JMB38X_MS 0x2383
+#define PCI_DEVICE_ID_JMICRON_JMB388_SD 0x2391
+#define PCI_DEVICE_ID_JMICRON_JMB388_ESD 0x2392
#define PCI_VENDOR_ID_KORENIX 0x1982
#define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600