diff options
| -rw-r--r-- | drivers/input/touchscreen/corgi_ts.c | 89 | ||||
| -rw-r--r-- | drivers/input/touchscreen/elo.c | 89 | ||||
| -rw-r--r-- | drivers/input/touchscreen/gunze.c | 66 | ||||
| -rw-r--r-- | drivers/input/touchscreen/h3600_ts_input.c | 149 | ||||
| -rw-r--r-- | drivers/input/touchscreen/hp680_ts_input.c | 50 | ||||
| -rw-r--r-- | drivers/input/touchscreen/mk712.c | 80 | ||||
| -rw-r--r-- | drivers/input/touchscreen/mtouch.c | 64 |
7 files changed, 279 insertions, 308 deletions
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index 4c7fbe55036..40ae183ba1c 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c @@ -41,8 +41,7 @@ struct ts_event { }; struct corgi_ts { - char phys[32]; - struct input_dev input; + struct input_dev *input; struct timer_list timer; struct ts_event tc; int pendown; @@ -182,14 +181,12 @@ static void new_data(struct corgi_ts *corgi_ts, struct pt_regs *regs) if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0) return; - if (regs) - input_regs(&corgi_ts->input, regs); - - input_report_abs(&corgi_ts->input, ABS_X, corgi_ts->tc.x); - input_report_abs(&corgi_ts->input, ABS_Y, corgi_ts->tc.y); - input_report_abs(&corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure); - input_report_key(&corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0)); - input_sync(&corgi_ts->input); + input_regs(corgi_ts->input, regs); + input_report_abs(corgi_ts->input, ABS_X, corgi_ts->tc.x); + input_report_abs(corgi_ts->input, ABS_Y, corgi_ts->tc.y); + input_report_abs(corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure); + input_report_key(corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0)); + input_sync(corgi_ts->input); } static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer, struct pt_regs *regs) @@ -273,39 +270,44 @@ static int __init corgits_probe(struct device *dev) { struct corgi_ts *corgi_ts; struct platform_device *pdev = to_platform_device(dev); + struct input_dev *input_dev; + int err = -ENOMEM; - if (!(corgi_ts = kmalloc(sizeof(struct corgi_ts), GFP_KERNEL))) - return -ENOMEM; + corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!corgi_ts || !input_dev) + goto fail; dev_set_drvdata(dev, corgi_ts); - memset(corgi_ts, 0, sizeof(struct corgi_ts)); - corgi_ts->machinfo = dev->platform_data; corgi_ts->irq_gpio = platform_get_irq(pdev, 0); if (corgi_ts->irq_gpio < 0) { - kfree(corgi_ts); - return -ENODEV; + err = -ENODEV; + goto fail; } - init_input_dev(&corgi_ts->input); - corgi_ts->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - corgi_ts->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - input_set_abs_params(&corgi_ts->input, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); - input_set_abs_params(&corgi_ts->input, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); - input_set_abs_params(&corgi_ts->input, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0); + corgi_ts->input = input_dev; - strcpy(corgi_ts->phys, "corgits/input0"); + init_timer(&corgi_ts->timer); + corgi_ts->timer.data = (unsigned long) corgi_ts; + corgi_ts->timer.function = corgi_ts_timer; - corgi_ts->input.private = corgi_ts; - corgi_ts->input.name = "Corgi Touchscreen"; - corgi_ts->input.dev = dev; - corgi_ts->input.phys = corgi_ts->phys; - corgi_ts->input.id.bustype = BUS_HOST; - corgi_ts->input.id.vendor = 0x0001; - corgi_ts->input.id.product = 0x0002; - corgi_ts->input.id.version = 0x0100; + input_dev->name = "Corgi Touchscreen"; + input_dev->phys = "corgits/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0002; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = dev; + input_dev->private = corgi_ts; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0); pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN); @@ -319,25 +321,24 @@ static int __init corgits_probe(struct device *dev) corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS); mdelay(5); - init_timer(&corgi_ts->timer); - corgi_ts->timer.data = (unsigned long) corgi_ts; - corgi_ts->timer.function = corgi_ts_timer; - - input_register_device(&corgi_ts->input); - corgi_ts->power_mode = PWR_MODE_ACTIVE; - if (request_irq(corgi_ts->irq_gpio, ts_interrupt, SA_INTERRUPT, "ts", corgi_ts)) { - input_unregister_device(&corgi_ts->input); - kfree(corgi_ts); - return -EBUSY; + err = -EBUSY; + goto fail; } + input_register_device(corgi_ts->input); + + corgi_ts->power_mode = PWR_MODE_ACTIVE; + /* Enable Falling Edge */ set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); - printk(KERN_INFO "input: Corgi Touchscreen Registered\n"); - return 0; + + fail: input_free_device(input_dev); + kfree(corgi_ts); + return err; + } static int corgits_remove(struct device *dev) @@ -347,7 +348,7 @@ static int corgits_remove(struct device *dev) free_irq(corgi_ts->irq_gpio, NULL); del_timer_sync(&corgi_ts->timer); corgi_ts->machinfo->put_hsync(); - input_unregister_device(&corgi_ts->input); + input_unregister_device(corgi_ts->input); kfree(corgi_ts); return 0; } diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index 3cdc9cab688..c86a2eb310f 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c @@ -36,14 +36,12 @@ MODULE_LICENSE("GPL"); #define ELO_MAX_LENGTH 10 -static char *elo_name = "Elo Serial TouchScreen"; - /* * Per-touchscreen data. */ struct elo { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; int id; int idx; @@ -54,7 +52,7 @@ struct elo { static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_regs *regs) { - struct input_dev *dev = &elo->dev; + struct input_dev *dev = elo->dev; elo->csum += elo->data[elo->idx] = data; @@ -80,7 +78,7 @@ static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_r input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]); input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]); input_report_abs(dev, ABS_PRESSURE, (elo->data[8] << 8) | elo->data[7]); - input_report_key(dev, BTN_TOUCH, elo->data[2] & 3); + input_report_key(dev, BTN_TOUCH, elo->data[8] || elo->data[7]); input_sync(dev); } elo->idx = 0; @@ -91,7 +89,7 @@ static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_r static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_regs *regs) { - struct input_dev *dev = &elo->dev; + struct input_dev *dev = elo->dev; elo->data[elo->idx] = data; @@ -129,7 +127,7 @@ static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_re case 5: if ((data & 0xf0) == 0) { input_report_abs(dev, ABS_PRESSURE, elo->data[5]); - input_report_key(dev, BTN_TOUCH, elo->data[5]); + input_report_key(dev, BTN_TOUCH, !!elo->data[5]); } input_sync(dev); elo->idx = 0; @@ -139,7 +137,7 @@ static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_re static void elo_process_data_3(struct elo* elo, unsigned char data, struct pt_regs *regs) { - struct input_dev *dev = &elo->dev; + struct input_dev *dev = elo->dev; elo->data[elo->idx] = data; @@ -191,7 +189,7 @@ static void elo_disconnect(struct serio *serio) { struct elo* elo = serio_get_drvdata(serio); - input_unregister_device(&elo->dev); + input_unregister_device(elo->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(elo); @@ -206,67 +204,68 @@ static void elo_disconnect(struct serio *serio) static int elo_connect(struct serio *serio, struct serio_driver *drv) { struct elo *elo; + struct input_dev *input_dev; int err; - if (!(elo = kmalloc(sizeof(struct elo), GFP_KERNEL))) - return -ENOMEM; + elo = kzalloc(sizeof(struct elo), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!elo || !input_dev) { + err = -ENOMEM; + goto fail; + } - memset(elo, 0, sizeof(struct elo)); + elo->serio = serio; + elo->id = serio->id.id; + elo->dev = input_dev; + snprintf(elo->phys, sizeof(elo->phys), "%s/input0", serio->phys); - init_input_dev(&elo->dev); - elo->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - elo->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_dev->private = elo; + input_dev->name = "Elo Serial TouchScreen"; + input_dev->phys = elo->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_ELO; + input_dev->id.product = elo->id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; - elo->id = serio->id.id; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); switch (elo->id) { case 0: /* 10-byte protocol */ - input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0); - input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0); - input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0); break; case 1: /* 6-byte protocol */ - input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 15, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0); case 2: /* 4-byte protocol */ - input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0); - input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0); break; case 3: /* 3-byte protocol */ - input_set_abs_params(&elo->dev, ABS_X, 0, 255, 0, 0); - input_set_abs_params(&elo->dev, ABS_Y, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0); break; } - elo->serio = serio; - - sprintf(elo->phys, "%s/input0", serio->phys); - - elo->dev.private = elo; - elo->dev.name = elo_name; - elo->dev.phys = elo->phys; - elo->dev.id.bustype = BUS_RS232; - elo->dev.id.vendor = SERIO_ELO; - elo->dev.id.product = elo->id; - elo->dev.id.version = 0x0100; - serio_set_drvdata(serio, elo); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(elo); - return err; - } - - input_register_device(&elo->dev); - - printk(KERN_INFO "input: %s on %s\n", elo_name, serio->phys); + if (err) + goto fail; + input_register_device(elo->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(elo); + return err; } /* diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c index 53a27e43dd2..466da190cee 100644 --- a/drivers/input/touchscreen/gunze.c +++ b/drivers/input/touchscreen/gunze.c @@ -48,14 +48,12 @@ MODULE_LICENSE("GPL"); #define GUNZE_MAX_LENGTH 10 -static char *gunze_name = "Gunze AHL-51S TouchScreen"; - /* * Per-touchscreen data. */ struct gunze { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; int idx; unsigned char data[GUNZE_MAX_LENGTH]; @@ -64,7 +62,7 @@ struct gunze { static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs) { - struct input_dev *dev = &gunze->dev; + struct input_dev *dev = gunze->dev; if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' || (gunze->data[0] != 'T' && gunze->data[0] != 'R')) { @@ -100,11 +98,13 @@ static irqreturn_t gunze_interrupt(struct serio *serio, static void gunze_disconnect(struct serio *serio) { - struct gunze* gunze = serio_get_drvdata(serio); + struct gunze *gunze = serio_get_drvdata(serio); - input_unregister_device(&gunze->dev); + input_get_device(gunze->dev); + input_unregister_device(gunze->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_put_device(gunze->dev); kfree(gunze); } @@ -117,45 +117,45 @@ static void gunze_disconnect(struct serio *serio) static int gunze_connect(struct serio *serio, struct serio_driver *drv) { struct gunze *gunze; + struct input_dev *input_dev; int err; - if (!(gunze = kmalloc(sizeof(struct gunze), GFP_KERNEL))) - return -ENOMEM; - - memset(gunze, 0, sizeof(struct gunze)); - - init_input_dev(&gunze->dev); - gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - gunze->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - input_set_abs_params(&gunze->dev, ABS_X, 24, 1000, 0, 0); - input_set_abs_params(&gunze->dev, ABS_Y, 24, 1000, 0, 0); + gunze = kzalloc(sizeof(struct gunze), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!gunze || !input_dev) { + err = -ENOMEM; + goto fail; + } gunze->serio = serio; - + gunze->dev = input_dev; sprintf(gunze->phys, "%s/input0", serio->phys); - gunze->dev.private = gunze; - gunze->dev.name = gunze_name; - gunze->dev.phys = gunze->phys; - gunze->dev.id.bustype = BUS_RS232; - gunze->dev.id.vendor = SERIO_GUNZE; - gunze->dev.id.product = 0x0051; - gunze->dev.id.version = 0x0100; + input_dev->private = gunze; + input_dev->name = "Gunze AHL-51S TouchScreen"; + input_dev->phys = gunze->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_GUNZE; + input_dev->id.product = 0x0051; + input_dev->id.version = 0x0100; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0); serio_set_drvdata(serio, gunze); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(gunze); - return err; - } - - input_register_device(&gunze->dev); - - printk(KERN_INFO "input: %s on %s\n", gunze_name, serio->phys); + if (err) + goto fail; + input_register_device(gunze->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(gunze); + return err; } /* diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c index bcfa1e36f95..a18d56bdafd 100644 --- a/drivers/input/touchscreen/h3600_ts_input.c +++ b/drivers/input/touchscreen/h3600_ts_input.c @@ -39,7 +39,6 @@ #include <linux/serio.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/pm.h> /* SA1100 serial defines */ #include <asm/arch/hardware.h> @@ -93,16 +92,12 @@ MODULE_LICENSE("GPL"); #define H3600_SCANCODE_LEFT 8 /* 8 -> left */ #define H3600_SCANCODE_DOWN 9 /* 9 -> down */ -static char *h3600_name = "H3600 TouchScreen"; - /* * Per-touchscreen data. */ struct h3600_dev { - struct input_dev dev; - struct pm_dev *pm_dev; + struct input_dev *dev; struct serio *serio; - struct pm_dev *pm_dev; unsigned char event; /* event ID from packet */ unsigned char chksum; unsigned char len; @@ -163,33 +158,6 @@ unsigned int h3600_flite_power(struct input_dev *dev, enum flite_pwr pwr) return 0; } -static int suspended = 0; -static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req, - void *data) -{ - struct input_dev *dev = (struct input_dev *) data; - - switch (req) { - case PM_SUSPEND: /* enter D1-D3 */ - suspended = 1; - h3600_flite_power(dev, FLITE_PWR_OFF); - break; - case PM_BLANK: - if (!suspended) - h3600_flite_power(dev, FLITE_PWR_OFF); - break; - case PM_RESUME: /* enter D0 */ - /* same as unblank */ - case PM_UNBLANK: - if (suspended) { - //initSerial(); - suspended = 0; - } - h3600_flite_power(dev, FLITE_PWR_ON); - break; - } - return 0; -} #endif /* @@ -199,7 +167,7 @@ static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req, */ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs) { - struct input_dev *dev = &ts->dev; + struct input_dev *dev = ts->dev; static int touched = 0; int key, down = 0; @@ -295,6 +263,7 @@ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs) static int h3600ts_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { +#if 0 struct h3600_dev *ts = dev->private; switch (type) { @@ -304,6 +273,8 @@ static int h3600ts_event(struct input_dev *dev, unsigned int type, } } return -1; +#endif + return 0; } /* @@ -380,14 +351,48 @@ static irqreturn_t h3600ts_interrupt(struct serio *serio, unsigned char data, static int h3600ts_connect(struct serio *serio, struct serio_driver *drv) { struct h3600_dev *ts; + struct input_dev *input_dev; int err; - if (!(ts = kmalloc(sizeof(struct h3600_dev), GFP_KERNEL))) - return -ENOMEM; + ts = kzalloc(sizeof(struct h3600_dev), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto fail1; + } - memset(ts, 0, sizeof(struct h3600_dev)); + ts->serio = serio; + ts->dev = input_dev; + sprintf(ts->phys, "%s/input0", serio->phys); - init_input_dev(&ts->dev); + input_dev->name = "H3600 TouchScreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_H3600; + input_dev->id.product = 0x0666; /* FIXME !!! We can ask the hardware */ + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = ts; + + input_dev->event = h3600ts_event; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR); + input_dev->ledbit[0] = BIT(LED_SLEEP); + input_set_abs_params(input_dev, ABS_X, 60, 985, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 35, 1024, 0, 0); + + set_bit(KEY_RECORD, input_dev->keybit); + set_bit(KEY_Q, input_dev->keybit); + set_bit(KEY_PROG1, input_dev->keybit); + set_bit(KEY_PROG2, input_dev->keybit); + set_bit(KEY_PROG3, input_dev->keybit); + set_bit(KEY_UP, input_dev->keybit); + set_bit(KEY_RIGHT, input_dev->keybit); + set_bit(KEY_LEFT, input_dev->keybit); + set_bit(KEY_DOWN, input_dev->keybit); + set_bit(KEY_ENTER, input_dev->keybit); + set_bit(KEY_SUSPEND, input_dev->keybit); + set_bit(BTN_TOUCH, input_dev->keybit); /* Device specific stuff */ set_GPIO_IRQ_edge(GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES); @@ -397,73 +402,35 @@ static int h3600ts_connect(struct serio *serio, struct serio_driver *drv) SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM, "h3600_action", &ts->dev)) { printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n"); - kfree(ts); - return -EBUSY; + err = -EBUSY; + goto fail2; } if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler, SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM, "h3600_suspend", &ts->dev)) { - free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev); printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n"); - kfree(ts); - return -EBUSY; + err = -EBUSY; + goto fail3; } - /* Now we have things going we setup our input device */ - ts->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR); - ts->dev.ledbit[0] = BIT(LED_SLEEP); - input_set_abs_params(&ts->dev, ABS_X, 60, 985, 0, 0); - input_set_abs_params(&ts->dev, ABS_Y, 35, 1024, 0, 0); - - set_bit(KEY_RECORD, ts->dev.keybit); - set_bit(KEY_Q, ts->dev.keybit); - set_bit(KEY_PROG1, ts->dev.keybit); - set_bit(KEY_PROG2, ts->dev.keybit); - set_bit(KEY_PROG3, ts->dev.keybit); - set_bit(KEY_UP, ts->dev.keybit); - set_bit(KEY_RIGHT, ts->dev.keybit); - set_bit(KEY_LEFT, ts->dev.keybit); - set_bit(KEY_DOWN, ts->dev.keybit); - set_bit(KEY_ENTER, ts->dev.keybit); - ts->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); - ts->dev.keybit[LONG(KEY_SUSPEND)] |= BIT(KEY_SUSPEND); - - ts->serio = serio; - - sprintf(ts->phys, "%s/input0", serio->phys); - - ts->dev.event = h3600ts_event; - ts->dev.private = ts; - ts->dev.name = h3600_name; - ts->dev.phys = ts->phys; - ts->dev.id.bustype = BUS_RS232; - ts->dev.id.vendor = SERIO_H3600; - ts->dev.id.product = 0x0666; /* FIXME !!! We can ask the hardware */ - ts->dev.id.version = 0x0100; - serio_set_drvdata(serio, ts); err = serio_open(serio, drv); - if (err) { - free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts); - free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts); - serio_set_drvdata(serio, NULL); - kfree(ts); + if (err) return err; - } //h3600_flite_control(1, 25); /* default brightness */ -#ifdef CONFIG_PM - ts->pm_dev = pm_register(PM_ILLUMINATION_DEV, PM_SYS_LIGHT, - h3600ts_pm_callback); - printk("registered pm callback\n"); -#endif - input_register_device(&ts->dev); - - printk(KERN_INFO "input: %s on %s\n", h3600_name, serio->phys); + input_register_device(ts->dev); return 0; + +fail3: free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev); +fail2: free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev); +fail1: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(ts); + return err; } /* @@ -476,9 +443,11 @@ static void h3600ts_disconnect(struct serio *serio) free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev); free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, &ts->dev); - input_unregister_device(&ts->dev); + input_get_device(ts->dev); + input_unregister_device(ts->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_put_device(ts->dev); kfree(ts); } diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c index 7e1404441ec..957dd5a1b15 100644 --- a/drivers/input/touchscreen/hp680_ts_input.c +++ b/drivers/input/touchscreen/hp680_ts_input.c @@ -21,10 +21,8 @@ static void do_softint(void *data); -static struct input_dev hp680_ts_dev; +static struct input_dev *hp680_ts_dev; static DECLARE_WORK(work, do_softint, 0); -static char *hp680_ts_name = "HP Jornada touchscreen"; -static char *hp680_ts_phys = "input0"; static void do_softint(void *data) { @@ -58,14 +56,14 @@ static void do_softint(void *data) } if (touched) { - input_report_key(&hp680_ts_dev, BTN_TOUCH, 1); - input_report_abs(&hp680_ts_dev, ABS_X, absx); - input_report_abs(&hp680_ts_dev, ABS_Y, absy); + input_report_key(hp680_ts_dev, BTN_TOUCH, 1); + input_report_abs(hp680_ts_dev, ABS_X, absx); + input_report_abs(hp680_ts_dev, ABS_Y, absy); } else { - input_report_key(&hp680_ts_dev, BTN_TOUCH, 0); + input_report_key(hp680_ts_dev, BTN_TOUCH, 0); } - input_sync(&hp680_ts_dev); + input_sync(hp680_ts_dev); enable_irq(HP680_TS_IRQ); } @@ -92,27 +90,29 @@ static int __init hp680_ts_init(void) scpcr |= SCPCR_TS_ENABLE; ctrl_outw(scpcr, SCPCR); - memset(&hp680_ts_dev, 0, sizeof(hp680_ts_dev)); - init_input_dev(&hp680_ts_dev); + hp680_ts_dev = input_allocate_device(); + if (!hp680_ts_dev) + return -ENOMEM; - hp680_ts_dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY); - hp680_ts_dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - hp680_ts_dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + hp680_ts_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY); + hp680_ts_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + hp680_ts_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - hp680_ts_dev.absmin[ABS_X] = HP680_TS_ABS_X_MIN; - hp680_ts_dev.absmin[ABS_Y] = HP680_TS_ABS_Y_MIN; - hp680_ts_dev.absmax[ABS_X] = HP680_TS_ABS_X_MAX; - hp680_ts_dev.absmax[ABS_Y] = HP680_TS_ABS_Y_MAX; + hp680_ts_dev->absmin[ABS_X] = HP680_TS_ABS_X_MIN; + hp680_ts_dev->absmin[ABS_Y] = HP680_TS_ABS_Y_MIN; + hp680_ts_dev->absmax[ABS_X] = HP680_TS_ABS_X_MAX; + hp680_ts_dev->absmax[ABS_Y] = HP680_TS_ABS_Y_MAX; - hp680_ts_dev.name = hp680_ts_name; - hp680_ts_dev.phys = hp680_ts_phys; - input_register_device(&hp680_ts_dev); + hp680_ts_dev->name = "HP Jornada touchscreen"; + hp680_ts_dev->phys = "hp680_ts/input0"; - if (request_irq - (HP680_TS_IRQ, hp680_ts_interrupt, SA_INTERRUPT, MODNAME, 0) < 0) { - printk(KERN_ERR "hp680_touchscreen.c : Can't allocate irq %d\n", + input_register_device(hp680_ts_dev); + + if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt, + SA_INTERRUPT, MODNAME, 0) < 0) { + printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n", HP680_TS_IRQ); - input_unregister_device(&hp680_ts_dev); + input_unregister_device(hp680_ts_dev); return -EBUSY; } @@ -124,7 +124,7 @@ static void __exit hp680_ts_exit(void) free_irq(HP680_TS_IRQ, 0); cancel_delayed_work(&work); flush_scheduled_work(); - input_unregister_device(&hp680_ts_dev); + input_unregister_device(hp680_ts_dev); } module_init(hp680_ts_init); diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c index afaaebe5225..4844d250a5e 100644 --- a/drivers/input/touchscreen/mk712.c +++ b/drivers/input/touchscreen/mk712.c @@ -77,7 +77,7 @@ MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller"); #define MK712_READ_ONE_POINT 0x20 #define MK712_POWERUP 0x40 -static struct input_dev mk712_dev; +static struct input_dev *mk712_dev; static DEFINE_SPINLOCK(mk712_lock); static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) @@ -88,7 +88,7 @@ static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) static unsigned short last_y; spin_lock(&mk712_lock); - input_regs(&mk712_dev, regs); + input_regs(mk712_dev, regs); status = inb(mk712_io + MK712_STATUS); @@ -100,7 +100,7 @@ static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (~status & MK712_STATUS_TOUCH) { debounce = 1; - input_report_key(&mk712_dev, BTN_TOUCH, 0); + input_report_key(mk712_dev, BTN_TOUCH, 0); goto end; } @@ -110,15 +110,15 @@ static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) goto end; } - input_report_key(&mk712_dev, BTN_TOUCH, 1); - input_report_abs(&mk712_dev, ABS_X, last_x); - input_report_abs(&mk712_dev, ABS_Y, last_y); + input_report_key(mk712_dev, BTN_TOUCH, 1); + input_report_abs(mk712_dev, ABS_X, last_x); + input_report_abs(mk712_dev, ABS_Y, last_y); end: last_x = inw(mk712_io + MK712_X) & 0x0fff; last_y = inw(mk712_io + MK712_Y) & 0x0fff; - input_sync(&mk712_dev); + input_sync(mk712_dev); spin_unlock(&mk712_lock); return IRQ_HANDLED; } @@ -154,30 +154,11 @@ static void mk712_close(struct input_dev *dev) spin_unlock_irqrestore(&mk712_lock, flags); } -static struct input_dev mk712_dev = { - .evbit = { BIT(EV_KEY) | BIT(EV_ABS) }, - .keybit = { [LONG(BTN_TOUCH)] = BIT(BTN_TOUCH) }, - .absbit = { BIT(ABS_X) | BIT(ABS_Y) }, - .open = mk712_open, - .close = mk712_close, - .name = "ICS MicroClock MK712 TouchScreen", - .phys = "isa0260/input0", - .absmin = { [ABS_X] = 0, [ABS_Y] = 0 }, - .absmax = { [ABS_X] = 0xfff, [ABS_Y] = 0xfff }, - .absfuzz = { [ABS_X] = 88, [ABS_Y] = 88 }, - .id = { - .bustype = BUS_ISA, - .vendor = 0x0005, - .product = 0x0001, - .version = 0x0100, - }, -}; - int __init mk712_init(void) { + int err; - if(!request_region(mk712_io, 8, "mk712")) - { + if (!request_region(mk712_io, 8, "mk712")) { printk(KERN_WARNING "mk712: unable to get IO region\n"); return -ENODEV; } @@ -188,28 +169,49 @@ int __init mk712_init(void) (inw(mk712_io + MK712_Y) & 0xf000) || (inw(mk712_io + MK712_STATUS) & 0xf333)) { printk(KERN_WARNING "mk712: device not present\n"); - release_region(mk712_io, 8); - return -ENODEV; + err = -ENODEV; + goto fail; } - if(request_irq(mk712_irq, mk712_interrupt, 0, "mk712", &mk712_dev)) - { - printk(KERN_WARNING "mk712: unable to get IRQ\n"); - release_region(mk712_io, 8); - return -EBUSY; + if (!(mk712_dev = input_allocate_device())) { + printk(KERN_ERR "mk712: not enough memory\n"); + err = -ENOMEM; + goto fail; } - input_register_device(&mk712_dev); + mk712_dev->name = "ICS MicroClock MK712 TouchScreen"; + mk712_dev->phys = "isa0260/input0"; + mk712_dev->id.bustype = BUS_ISA; + mk712_dev->id.vendor = 0x0005; + mk712_dev->id.product = 0x0001; + mk712_dev->id.version = 0x0100; + + mk712_dev->open = mk712_open; + mk712_dev->close = mk712_close; - printk(KERN_INFO "input: ICS MicroClock MK712 TouchScreen at %#x irq %d\n", mk712_io, mk712_irq); + mk712_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + mk712_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(mk712_dev, ABS_X, 0, 0xfff, 88, 0); + input_set_abs_params(mk712_dev, ABS_Y, 0, 0xfff, 88, 0); + if (request_irq(mk712_irq, mk712_interrupt, 0, "mk712", mk712_dev)) { + printk(KERN_WARNING "mk712: unable to get IRQ\n"); + err = -EBUSY; + goto fail; + } + + input_register_device(mk712_dev); return 0; + + fail: input_free_device(mk712_dev); + release_region(mk712_io, 8); + return err; } static void __exit mk712_exit(void) { - input_unregister_device(&mk712_dev); - free_irq(mk712_irq, &mk712_dev); + input_unregister_device(mk712_dev); + free_irq(mk712_irq, mk712_dev); release_region(mk712_io, 8); } diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c index aa8ee784217..1d0d37eeef6 100644 --- a/drivers/input/touchscreen/mtouch.c +++ b/drivers/input/touchscreen/mtouch.c @@ -51,14 +51,12 @@ MODULE_LICENSE("GPL"); #define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3]) #define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0]) -static char *mtouch_name = "MicroTouch Serial TouchScreen"; - /* * Per-touchscreen data. */ struct mtouch { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; int idx; unsigned char data[MTOUCH_MAX_LENGTH]; @@ -67,7 +65,7 @@ struct mtouch { static void mtouch_process_format_tablet(struct mtouch *mtouch, struct pt_regs *regs) { - struct input_dev *dev = &mtouch->dev; + struct input_dev *dev = mtouch->dev; if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) { input_regs(dev, regs); @@ -116,9 +114,11 @@ static void mtouch_disconnect(struct serio *serio) { struct mtouch* mtouch = serio_get_drvdata(serio); - input_unregister_device(&mtouch->dev); + input_get_device(mtouch->dev); + input_unregister_device(mtouch->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_put_device(mtouch->dev); kfree(mtouch); } @@ -131,46 +131,46 @@ static void mtouch_disconnect(struct serio *serio) static int mtouch_connect(struct serio *serio, struct serio_driver *drv) { struct mtouch *mtouch; + struct input_dev *input_dev; int err; - if (!(mtouch = kmalloc(sizeof(*mtouch), GFP_KERNEL))) - return -ENOMEM; - - memset(mtouch, 0, sizeof(*mtouch)); - - init_input_dev(&mtouch->dev); - mtouch->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - mtouch->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - input_set_abs_params(&mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0); - input_set_abs_params(&mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0); + mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mtouch || !input_dev) { + err = -ENOMEM; + goto fail; + } mtouch->serio = serio; - + mtouch->dev = input_dev; sprintf(mtouch->phys, "%s/input0", serio->phys); - mtouch->dev.private = mtouch; - mtouch->dev.name = mtouch_name; - mtouch->dev.phys = mtouch->phys; - mtouch->dev.id.bustype = BUS_RS232; - mtouch->dev.id.vendor = SERIO_MICROTOUCH; - mtouch->dev.id.product = 0; - mtouch->dev.id.version = 0x0100; + input_dev->private = mtouch; + input_dev->name = "MicroTouch Serial TouchScreen"; + input_dev->phys = mtouch->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_MICROTOUCH; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0); + input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0); serio_set_drvdata(serio, mtouch); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(mtouch); - return err; - } - - input_register_device(&mtouch->dev); + if (err) + goto fail; - printk(KERN_INFO "input: %s on %s\n", mtouch->dev.name, serio->phys); + input_register_device(mtouch->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(mtouch); + return err; } /* |