diff options
| -rw-r--r-- | arch/powerpc/Kconfig.debug | 3 | ||||
| -rw-r--r-- | arch/powerpc/platforms/82xx/Kconfig | 35 | ||||
| -rw-r--r-- | arch/powerpc/platforms/embedded6xx/Kconfig | 264 |
3 files changed, 38 insertions, 264 deletions
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index d39d13327e6..50f48f0c563 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -132,8 +132,7 @@ config BOOTX_TEXT config SERIAL_TEXT_DEBUG bool "Support for early boot texts over serial port" - depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \ - PPC_GEN550 || PPC_MPC52xx + depends on 4xx config PPC_EARLY_DEBUG bool "Early debugging (dangerous)" diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig index 47d841ecf2e..411071686f2 100644 --- a/arch/powerpc/platforms/82xx/Kconfig +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -18,4 +18,39 @@ config MPC82xx_ADS endchoice +config PQ2ADS + bool + depends on ADS8272 + default y + +config ADS8272 + bool + +config 8260 + bool "CPM2 Support" if WILLOW + depends on 6xx + default y if PQ2FADS + help + The MPC8260 is a typical embedded CPU made by Motorola. Selecting + this option means that you wish to build a kernel for a machine with + an 8260 class CPU. + +config 8272 + bool + depends on 6xx + default y if ADS8272 + select 8260 + help + The MPC8272 CPM has a different internal dpram setup than other CPM2 + devices + +config CPM2 + bool + depends on 8260 || MPC8560 || MPC8555 + default y + help + The CPM2 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM2 coprocessor + on it (826x, 827x, 8560). endmenu diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 3410bcbc9db..9557908ef54 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -2,78 +2,6 @@ choice prompt "Machine Type" depends on EMBEDDED6xx -config KATANA - bool "Artesyn-Katana" - help - Select KATANA if configuring an Artesyn KATANA 750i or 3750 - cPCI board. - -config WILLOW - bool "Cogent-Willow" - -config CPCI690 - bool "Force-CPCI690" - help - Select CPCI690 if configuring a Force CPCI690 cPCI board. - -config POWERPMC250 - bool "Force-PowerPMC250" - -config CHESTNUT - bool "IBM 750FX Eval board or 750GX Eval board" - help - Select CHESTNUT if configuring an IBM 750FX Eval Board or a - IBM 750GX Eval board. - -config SPRUCE - bool "IBM-Spruce" - select PPC_INDIRECT_PCI - -config HDPU - bool "Sky-HDPU" - help - Select HDPU if configuring a Sky Computers Compute Blade. - -config HDPU_FEATURES - depends on HDPU - tristate "HDPU-Features" - help - Select to enable HDPU enhanced features. - -config EV64260 - bool "Marvell-EV64260BP" - help - Select EV64260 if configuring a Marvell (formerly Galileo) - EV64260BP Evaluation platform. - -config LOPEC - bool "Motorola-LoPEC" - select PPC_I8259 - -config MVME5100 - bool "Motorola-MVME5100" - select PPC_INDIRECT_PCI - -config PPLUS - bool "Motorola-PowerPlus" - select PPC_I8259 - select PPC_INDIRECT_PCI - -config PRPMC750 - bool "Motorola-PrPMC750" - select PPC_INDIRECT_PCI - -config PRPMC800 - bool "Motorola-PrPMC800" - select PPC_INDIRECT_PCI - -config SANDPOINT - bool "Motorola-Sandpoint" - select PPC_I8259 - help - Select SANDPOINT if configuring for a Motorola Sandpoint X3 - (any flavor). - config LINKSTATION bool "Linkstation / Kurobox(HG) from Buffalo" select MPIC @@ -97,212 +25,24 @@ config MPC7448HPC2 help Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) platform - -config RADSTONE_PPC7D - bool "Radstone Technology PPC7D board" - select PPC_I8259 - -config PAL4 - bool "SBS-Palomar4" - -config EST8260 - bool "EST8260" - ---help--- - The EST8260 is a single-board computer manufactured by Wind River - Systems, Inc. (formerly Embedded Support Tools Corp.) and based on - the MPC8260. Wind River Systems has a website at - <http://www.windriver.com/>, but the EST8260 cannot be found on it - and has probably been discontinued or rebadged. - -config SBC82xx - bool "SBC82xx" - ---help--- - SBC PowerQUICC II, single-board computer with MPC82xx CPU - Manufacturer: Wind River Systems, Inc. - Date of Release: May 2003 - End of Life: - - URL: <http://www.windriver.com/> - -config SBS8260 - bool "SBS8260" - -config RPX8260 - bool "RPXSUPER" - -config TQM8260 - bool "TQM8260" - ---help--- - MPC8260 based module, little larger than credit card, - up to 128 MB global + 64 MB local RAM, 32 MB Flash, - 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet, - 2 x serial ports, ... - Manufacturer: TQ Components, www.tq-group.de - Date of Release: June 2001 - End of Life: not yet :-) - URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf> - -config ADS8272 - bool "ADS8272" - -config PQ2FADS - bool "Freescale-PQ2FADS" - help - Select PQ2FADS if you wish to configure for a Freescale - PQ2FADS board (-VR or -ZU). - -config EV64360 - bool "Marvell-EV64360BP" - help - Select EV64360 if configuring a Marvell EV64360BP Evaluation - platform. endchoice -config PQ2ADS - bool - depends on ADS8272 - default y - -config TQM8xxL - bool - depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) - default y - -config 8260 - bool "CPM2 Support" if WILLOW - depends on 6xx - default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS - help - The MPC8260 is a typical embedded CPU made by Motorola. Selecting - this option means that you wish to build a kernel for a machine with - an 8260 class CPU. - -config 8272 - bool - depends on 6xx - default y if ADS8272 - select 8260 - help - The MPC8272 CPM has a different internal dpram setup than other CPM2 - devices - -config CPM2 - bool - depends on 8260 || MPC8560 || MPC8555 - default y - help - The CPM2 (Communications Processor Module) is a coprocessor on - embedded CPUs made by Motorola. Selecting this option means that - you wish to build a kernel for a machine with a CPM2 coprocessor - on it (826x, 827x, 8560). - -config PPC_GEN550 - bool - depends on SANDPOINT || SPRUCE || PPLUS || \ - PRPMC750 || PRPMC800 || LOPEC || \ - (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ - 83xx || LINKSTATION - default y - -config FORCE - bool - depends on 6xx && POWERPMC250 - default y - -config GT64260 - bool - depends on EV64260 || CPCI690 - default y - -config MV64360 # Really MV64360 & MV64460 - bool - depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360 - default y - -config MV64X60 - bool - depends on (GT64260 || MV64360) - select PPC_INDIRECT_PCI - default y - config TSI108_BRIDGE bool depends on MPC7448HPC2 default y -menu "Set bridge options" - depends on MV64X60 - -config NOT_COHERENT_CACHE - bool "Turn off Cache Coherency" - default n - help - Some 64x60 bridges lock up when trying to enforce cache coherency. - When this option is selected, cache coherency will be turned off. - Note that this can cause other problems (e.g., stale data being - speculatively loaded via a cached mapping). Use at your own risk. - -config MV64X60_BASE - hex "Set bridge base used by firmware" - default "0xf1000000" - help - A firmware can leave the base address of the bridge's registers at - a non-standard location. If so, set this value to reflect the - address of that non-standard location. - -config MV64X60_NEW_BASE - hex "Set bridge base used by kernel" - default "0xf1000000" - help - If the current base address of the bridge's registers is not where - you want it, set this value to the address that you want it moved to. - -endmenu - -config NONMONARCH_SUPPORT - bool "Enable Non-Monarch Support" - depends on PRPMC800 - -config HARRIER - bool - depends on PRPMC800 - default y - -config EPIC_SERIAL_MODE - bool - depends on 6xx && (LOPEC || SANDPOINT) - default y - config MPC10X_BRIDGE bool - depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION + depends on LINKSTATION select PPC_INDIRECT_PCI default y config MPC10X_OPENPIC bool - depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION + depends on LINKSTATION default y config MPC10X_STORE_GATHERING bool "Enable MPC10x store gathering" depends on MPC10X_BRIDGE - -config SANDPOINT_ENABLE_UART1 - bool "Enable DUART mode on Sandpoint" - depends on SANDPOINT - help - If this option is enabled then the MPC824x processor will run - in DUART mode instead of UART mode. - -config HARRIER_STORE_GATHERING - bool "Enable Harrier store gathering" - depends on HARRIER - -config MVME5100_IPMC761_PRESENT - bool "MVME5100 configured with an IPMC761" - depends on MVME5100 - select PPC_I8259 - -config SPRUCE_BAUD_33M - bool "Spruce baud clock support" - depends on SPRUCE |