diff options
| -rw-r--r-- | drivers/net/dl2k.c | 43 | ||||
| -rw-r--r-- | drivers/net/hamachi.c | 13 | ||||
| -rw-r--r-- | drivers/net/natsemi.c | 117 | ||||
| -rw-r--r-- | drivers/net/starfire.c | 122 | ||||
| -rw-r--r-- | drivers/net/sundance.c | 84 | ||||
| -rw-r--r-- | drivers/net/tulip/xircom_tulip_cb.c | 27 | ||||
| -rw-r--r-- | drivers/net/via-rhine.c | 110 | ||||
| -rw-r--r-- | drivers/net/yellowfin.c | 30 |
8 files changed, 24 insertions, 522 deletions
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 4b6ddb70f92..402961e68c8 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -9,49 +9,10 @@ the Free Software Foundation; either version 2 of the License, or (at your option) any later version. */ -/* - Rev Date Description - ========================================================================== - 0.01 2001/05/03 Created DL2000-based linux driver - 0.02 2001/05/21 Added VLAN and hardware checksum support. - 1.00 2001/06/26 Added jumbo frame support. - 1.01 2001/08/21 Added two parameters, rx_coalesce and rx_timeout. - 1.02 2001/10/08 Supported fiber media. - Added flow control parameters. - 1.03 2001/10/12 Changed the default media to 1000mbps_fd for - the fiber devices. - 1.04 2001/11/08 Fixed Tx stopped when tx very busy. - 1.05 2001/11/22 Fixed Tx stopped when unidirectional tx busy. - 1.06 2001/12/13 Fixed disconnect bug at 10Mbps mode. - Fixed tx_full flag incorrect. - Added tx_coalesce paramter. - 1.07 2002/01/03 Fixed miscount of RX frame error. - 1.08 2002/01/17 Fixed the multicast bug. - 1.09 2002/03/07 Move rx-poll-now to re-fill loop. - Added rio_timer() to watch rx buffers. - 1.10 2002/04/16 Fixed miscount of carrier error. - 1.11 2002/05/23 Added ISR schedule scheme - Fixed miscount of rx frame error for DGE-550SX. - Fixed VLAN bug. - 1.12 2002/06/13 Lock tx_coalesce=1 on 10/100Mbps mode. - 1.13 2002/08/13 1. Fix disconnection (many tx:carrier/rx:frame - errs) with some mainboards. - 2. Use definition "DRV_NAME" "DRV_VERSION" - "DRV_RELDATE" for flexibility. - 1.14 2002/08/14 Support ethtool. - 1.15 2002/08/27 Changed the default media to Auto-Negotiation - for the fiber devices. - 1.16 2002/09/04 More power down time for fiber devices auto- - negotiation. - Fix disconnect bug after ifup and ifdown. - 1.17 2002/10/03 Fix RMON statistics overflow. - Always use I/O mapping to access eeprom, - avoid system freezing with some chipsets. -*/ #define DRV_NAME "D-Link DL2000-based linux driver" -#define DRV_VERSION "v1.17b" -#define DRV_RELDATE "2006/03/10" +#define DRV_VERSION "v1.18" +#define DRV_RELDATE "2006/06/27" #include "dl2k.h" #include <linux/dma-mapping.h> diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index 7bcd939c6ed..1b212a56933 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -20,22 +20,15 @@ Support and updates available at http://www.scyld.com/network/hamachi.html + [link no longer provides useful info -jgarzik] or http://www.parl.clemson.edu/~keithu/hamachi.html - - - Linux kernel changelog: - - LK1.0.1: - - fix lack of pci_dev<->dev association - - ethtool support (jgarzik) - */ #define DRV_NAME "hamachi" -#define DRV_VERSION "1.01+LK1.0.1" -#define DRV_RELDATE "5/18/2001" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" /* A few user-configurable values. */ diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 9df2628be1e..db0475a1102 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -20,120 +20,9 @@ Support information and updates available at http://www.scyld.com/network/netsemi.html + [link no longer provides useful info -jgarzik] - Linux kernel modifications: - - Version 1.0.1: - - Spinlock fixes - - Bug fixes and better intr performance (Tjeerd) - Version 1.0.2: - - Now reads correct MAC address from eeprom - Version 1.0.3: - - Eliminate redundant priv->tx_full flag - - Call netif_start_queue from dev->tx_timeout - - wmb() in start_tx() to flush data - - Update Tx locking - - Clean up PCI enable (davej) - Version 1.0.4: - - Merge Donald Becker's natsemi.c version 1.07 - Version 1.0.5: - - { fill me in } - Version 1.0.6: - * ethtool support (jgarzik) - * Proper initialization of the card (which sometimes - fails to occur and leaves the card in a non-functional - state). (uzi) - - * Some documented register settings to optimize some - of the 100Mbit autodetection circuitry in rev C cards. (uzi) - - * Polling of the PHY intr for stuff like link state - change and auto- negotiation to finally work properly. (uzi) - - * One-liner removal of a duplicate declaration of - netdev_error(). (uzi) - - Version 1.0.7: (Manfred Spraul) - * pci dma - * SMP locking update - * full reset added into tx_timeout - * correct multicast hash generation (both big and little endian) - [copied from a natsemi driver version - from Myrio Corporation, Greg Smith] - * suspend/resume - - version 1.0.8 (Tim Hockin <thockin@sun.com>) - * ETHTOOL_* support - * Wake on lan support (Erik Gilling) - * MXDMA fixes for serverworks - * EEPROM reload - - version 1.0.9 (Manfred Spraul) - * Main change: fix lack of synchronize - netif_close/netif_suspend against a last interrupt - or packet. - * do not enable superflous interrupts (e.g. the - drivers relies on TxDone - TxIntr not needed) - * wait that the hardware has really stopped in close - and suspend. - * workaround for the (at least) gcc-2.95.1 compiler - problem. Also simplifies the code a bit. - * disable_irq() in tx_timeout - needed to protect - against rx interrupts. - * stop the nic before switching into silent rx mode - for wol (required according to docu). - - version 1.0.10: - * use long for ee_addr (various) - * print pointers properly (DaveM) - * include asm/irq.h (?) - - version 1.0.11: - * check and reset if PHY errors appear (Adrian Sun) - * WoL cleanup (Tim Hockin) - * Magic number cleanup (Tim Hockin) - * Don't reload EEPROM on every reset (Tim Hockin) - * Save and restore EEPROM state across reset (Tim Hockin) - * MDIO Cleanup (Tim Hockin) - * Reformat register offsets/bits (jgarzik) - - version 1.0.12: - * ETHTOOL_* further support (Tim Hockin) - - version 1.0.13: - * ETHTOOL_[G]EEPROM support (Tim Hockin) - - version 1.0.13: - * crc cleanup (Matt Domsch <Matt_Domsch@dell.com>) - - version 1.0.14: - * Cleanup some messages and autoneg in ethtool (Tim Hockin) - - version 1.0.15: - * Get rid of cable_magic flag - * use new (National provided) solution for cable magic issue - - version 1.0.16: - * call netdev_rx() for RxErrors (Manfred Spraul) - * formatting and cleanups - * change options and full_duplex arrays to be zero - initialized - * enable only the WoL and PHY interrupts in wol mode - - version 1.0.17: - * only do cable_magic on 83815 and early 83816 (Tim Hockin) - * create a function for rx refill (Manfred Spraul) - * combine drain_ring and init_ring (Manfred Spraul) - * oom handling (Manfred Spraul) - * hands_off instead of playing with netif_device_{de,a}ttach - (Manfred Spraul) - * be sure to write the MAC back to the chip (Manfred Spraul) - * lengthen EEPROM timeout, and always warn about timeouts - (Manfred Spraul) - * comments update (Manfred) - * do the right thing on a phy-reset (Manfred and Tim) - TODO: * big endian support with CFG:BEM instead of cpu_to_le32 */ @@ -165,8 +54,8 @@ #include <asm/uaccess.h> #define DRV_NAME "natsemi" -#define DRV_VERSION "1.07+LK1.0.17" -#define DRV_RELDATE "Sep 27, 2002" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" #define RX_OFFSET 2 diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index ed1f59901ff..24d55b4591b 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -22,129 +22,13 @@ Support and updates available at http://www.scyld.com/network/starfire.html + [link no longer provides useful info -jgarzik] - ----------------------------------------------------------- - - Linux kernel-specific changes: - - LK1.1.1 (jgarzik): - - Use PCI driver interface - - Fix MOD_xxx races - - softnet fixups - - LK1.1.2 (jgarzik): - - Merge Becker version 0.15 - - LK1.1.3 (Andrew Morton) - - Timer cleanups - - LK1.1.4 (jgarzik): - - Merge Becker version 1.03 - - LK1.2.1 (Ion Badulescu <ionut@cs.columbia.edu>) - - Support hardware Rx/Tx checksumming - - Use the GFP firmware taken from Adaptec's Netware driver - - LK1.2.2 (Ion Badulescu) - - Backported to 2.2.x - - LK1.2.3 (Ion Badulescu) - - Fix the flaky mdio interface - - More compat clean-ups - - LK1.2.4 (Ion Badulescu) - - More 2.2.x initialization fixes - - LK1.2.5 (Ion Badulescu) - - Several fixes from Manfred Spraul - - LK1.2.6 (Ion Badulescu) - - Fixed ifup/ifdown/ifup problem in 2.4.x - - LK1.2.7 (Ion Badulescu) - - Removed unused code - - Made more functions static and __init - - LK1.2.8 (Ion Badulescu) - - Quell bogus error messages, inform about the Tx threshold - - Removed #ifdef CONFIG_PCI, this driver is PCI only - - LK1.2.9 (Ion Badulescu) - - Merged Jeff Garzik's changes from 2.4.4-pre5 - - Added 2.2.x compatibility stuff required by the above changes - - LK1.2.9a (Ion Badulescu) - - More updates from Jeff Garzik - - LK1.3.0 (Ion Badulescu) - - Merged zerocopy support - - LK1.3.1 (Ion Badulescu) - - Added ethtool support - - Added GPIO (media change) interrupt support - - LK1.3.2 (Ion Badulescu) - - Fixed 2.2.x compatibility issues introduced in 1.3.1 - - Fixed ethtool ioctl returning uninitialized memory - - LK1.3.3 (Ion Badulescu) - - Initialize the TxMode register properly - - Don't dereference dev->priv after freeing it - - LK1.3.4 (Ion Badulescu) - - Fixed initialization timing problems - - Fixed interrupt mask definitions - - LK1.3.5 (jgarzik) - - ethtool NWAY_RST, GLINK, [GS]MSGLVL support - - LK1.3.6: - - Sparc64 support and fixes (Ion Badulescu) - - Better stats and error handling (Ion Badulescu) - - Use new pci_set_mwi() PCI API function (jgarzik) - - LK1.3.7 (Ion Badulescu) - - minimal implementation of tx_timeout() - - correctly shutdown the Rx/Tx engines in netdev_close() - - added calls to netif_carrier_on/off - (patch from Stefan Rompf <srompf@isg.de>) - - VLAN support - - LK1.3.8 (Ion Badulescu) - - adjust DMA burst size on sparc64 - - 64-bit support - - reworked zerocopy support for 64-bit buffers - - working and usable interrupt mitigation/latency - - reduced Tx interrupt frequency for lower interrupt overhead - - LK1.3.9 (Ion Badulescu) - - bugfix for mcast filter - - enable the right kind of Tx interrupts (TxDMADone, not TxDone) - - LK1.4.0 (Ion Badulescu) - - NAPI support - - LK1.4.1 (Ion Badulescu) - - flush PCI posting buffers after disabling Rx interrupts - - put the chip to a D3 slumber on driver unload - - added config option to enable/disable NAPI - - LK1.4.2 (Ion Badulescu) - - finally added firmware (GPL'ed by Adaptec) - - removed compatibility code for 2.2.x - - LK1.4.2.1 (Ion Badulescu) - - fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM - - added 32-bit padding to outgoing skb's, removed previous workaround - -TODO: - fix forced speed/duplexing code (broken a long time ago, when - somebody converted the driver to use the generic MII code) - - fix VLAN support */ #define DRV_NAME "starfire" -#define DRV_VERSION "1.03+LK1.4.2.1" -#define DRV_RELDATE "October 3, 2005" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" #include <linux/module.h> #include <linux/kernel.h> diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 643fceae3db..de664519665 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -16,91 +16,13 @@ Support and updates available at http://www.scyld.com/network/sundance.html + [link no longer provides useful info -jgarzik] - - Version LK1.01a (jgarzik): - - Replace some MII-related magic numbers with constants - - Version LK1.02 (D-Link): - - Add new board to PCI ID list - - Fix multicast bug - - Version LK1.03 (D-Link): - - New Rx scheme, reduce Rx congestion - - Option to disable flow control - - Version LK1.04 (D-Link): - - Tx timeout recovery - - More support for ethtool. - - Version LK1.04a: - - Remove unused/constant members from struct pci_id_info - (which then allows removal of 'drv_flags' from private struct) - (jgarzik) - - If no phy is found, fail to load that board (jgarzik) - - Always start phy id scan at id 1 to avoid problems (Donald Becker) - - Autodetect where mii_preable_required is needed, - default to not needed. (Donald Becker) - - Version LK1.04b: - - Remove mii_preamble_required module parameter (Donald Becker) - - Add per-interface mii_preamble_required (setting is autodetected) - (Donald Becker) - - Remove unnecessary cast from void pointer (jgarzik) - - Re-align comments in private struct (jgarzik) - - Version LK1.04c (jgarzik): - - Support bitmapped message levels (NETIF_MSG_xxx), and the - two ethtool ioctls that get/set them - - Don't hand-code MII ethtool support, use standard API/lib - - Version LK1.04d: - - Merge from Donald Becker's sundance.c: (Jason Lunz) - * proper support for variably-sized MTUs - * default to PIO, to fix chip bugs - - Add missing unregister_netdev (Jason Lunz) - - Add CONFIG_SUNDANCE_MMIO config option (jgarzik) - - Better rx buf size calculation (Donald Becker) - - Version LK1.05 (D-Link): - - Fix DFE-580TX packet drop issue (for DL10050C) - - Fix reset_tx logic - - Version LK1.06 (D-Link): - - Fix crash while unloading driver - - Versin LK1.06b (D-Link): - - New tx scheme, adaptive tx_coalesce - - Version LK1.07 (D-Link): - - Fix tx bugs in big-endian machines - - Remove unused max_interrupt_work module parameter, the new - NAPI-like rx scheme doesn't need it. - - Remove redundancy get_stats() in intr_handler(), those - I/O access could affect performance in ARM-based system - - Add Linux software VLAN support - - Version LK1.08 (Philippe De Muyter phdm@macqel.be): - - Fix bug of custom mac address - (StationAddr register only accept word write) - - Version LK1.09 (D-Link): - - Fix the flowctrl bug. - - Set Pause bit in MII ANAR if flow control enabled. - - Version LK1.09a (ICPlus): - - Add the delay time in reading the contents of EEPROM - - Version LK1.10 (Philippe De Muyter phdm@macqel.be): - - Make 'unblock interface after Tx underrun' work - - Version LK1.11 (Pedro Alejandro Lopez-Valencia palopezv at gmail.com): - - Add support for IC Plus Corporation IP100A chipset */ #define DRV_NAME "sundance" -#define DRV_VERSION "1.01+LK1.11" -#define DRV_RELDATE "14-Jun-2006" +#define DRV_VERSION "1.1" +#define DRV_RELDATE "27-Jun-2006" /* The user-configurable values. diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c index 091ebb7a62f..17ca7dc42e6 100644 --- a/drivers/net/tulip/xircom_tulip_cb.c +++ b/drivers/net/tulip/xircom_tulip_cb.c @@ -10,26 +10,11 @@ 410 Severn Ave., Suite 210 Annapolis MD 21403 - ----------------------------------------------------------- - - Linux kernel-specific changes: - - LK1.0 (Ion Badulescu) - - Major cleanup - - Use 2.4 PCI API - - Support ethtool - - Rewrite perfect filter/hash code - - Use interrupts for media changes - - LK1.1 (Ion Badulescu) - - Disallow negotiation of unsupported full-duplex modes */ #define DRV_NAME "xircom_tulip_cb" -#define DRV_VERSION "0.91+LK1.1" -#define DRV_RELDATE "October 11, 2001" - -#define CARDBUS 1 +#define DRV_VERSION "0.92" +#define DRV_RELDATE "June 27, 2006" /* A few user-configurable values. */ @@ -306,10 +291,10 @@ struct xircom_private { struct xircom_tx_desc tx_ring[TX_RING_SIZE]; /* The saved address of a sent-in-place packet/buffer, for skfree(). */ struct sk_buff* tx_skbuff[TX_RING_SIZE]; -#ifdef CARDBUS + /* The X3201-3 requires 4-byte aligned tx bufs */ struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE]; -#endif + /* The addresses of receive-in-place skbuffs. */ struct sk_buff* rx_skbuff[RX_RING_SIZE]; u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)]; /* Pseudo-Tx frame to init address table. */ @@ -908,10 +893,8 @@ static void xircom_init_ring(struct net_device *dev) tp->tx_skbuff[i] = NULL; tp->tx_ring[i].status = 0; tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]); -#ifdef CARDBUS if (tp->chip_id == X3201_3) tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ); -#endif /* CARDBUS */ } tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]); } @@ -931,12 +914,10 @@ xircom_start_xmit(struct sk_buff *skb, struct net_device *dev) entry = tp->cur_tx % TX_RING_SIZE; tp->tx_skbuff[entry] = skb; -#ifdef CARDBUS if (tp->chip_id == X3201_3) { memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len); tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data); } else -#endif tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data); if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */ diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 98b6f3207d3..e48e76ce73a 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -25,117 +25,13 @@ version. He may or may not be interested in bug reports on this code. You can find his versions at: http://www.scyld.com/network/via-rhine.html - - - Linux kernel version history: - - LK1.1.0: - - Jeff Garzik: softnet 'n stuff - - LK1.1.1: - - Justin Guyett: softnet and locking fixes - - Jeff Garzik: use PCI interface - - LK1.1.2: - - Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions - - LK1.1.3: - - Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c - code) update "Theory of Operation" with - softnet/locking changes - - Dave Miller: PCI DMA and endian fixups - - Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation - - LK1.1.4: - - Urban Widmark: fix gcc 2.95.2 problem and - remove writel's to fixed address 0x7c - - LK1.1.5: - - Urban Widmark: mdio locking, bounce buffer changes - merges from Beckers 1.05 version - added netif_running_on/off support - - LK1.1.6: - - Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio) - set netif_running_on/off on startup, del_timer_sync - - LK1.1.7: - - Manfred Spraul: added reset into tx_timeout - - LK1.1.9: - - Urban Widmark: merges from Beckers 1.10 version - (media selection + eeprom reload) - - David Vrabel: merges from D-Link "1.11" version - (disable WOL and PME on startup) - - LK1.1.10: - - Manfred Spraul: use "singlecopy" for unaligned buffers - don't allocate bounce buffers for !ReqTxAlign cards - - LK1.1.11: - - David Woodhouse: Set dev->base_addr before the first time we call - wait_for_reset(). It's a lot happier that way. - Free np->tx_bufs only if we actually allocated it. - - LK1.1.12: - - Martin Eriksson: Allow Memory-Mapped IO to be enabled. - - LK1.1.13 (jgarzik): - - Add ethtool support - - Replace some MII-related magic numbers with constants - - LK1.1.14 (Ivan G.): - - fixes comments for Rhine-III - - removes W_MAX_TIMEOUT (unused) - - adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card - is R-I and has Davicom chip, flag is referenced in kernel driver) - - sends chip_id as a parameter to wait_for_reset since np is not - initialized on first call - - changes mmio "else if (chip_id==VT6102)" to "else" so it will work - for Rhine-III's (documentation says same bit is correct) - - transmit frame queue message is off by one - fixed - - adds IntrNormalSummary to "Something Wicked" exclusion list - so normal interrupts will not trigger the message (src: Donald Becker) - (Roger Luethi) - - show confused chip where to continue after Tx error - - location of collision counter is chip specific - - allow selecting backoff algorithm (module parameter) - - LK1.1.15 (jgarzik): - - Use new MII lib helper generic_mii_ioctl - - LK1.1.16 (Roger Luethi) - - Etherleak fix - - Handle Tx buffer underrun - - Fix bugs in full duplex handling - - New reset code uses "force reset" cmd on Rhine-II - - Various clean ups - - LK1.1.17 (Roger Luethi) - - Fix race in via_rhine_start_tx() - - On errors, wait for Tx engine to turn off before scavenging - - Handle Tx descriptor write-back race on Rhine-II - - Force flushing for PCI posted writes - - More reset code changes - - LK1.1.18 (Roger Luethi) - - No filtering multicast in promisc mode (Edward Peng) - - Fix for Rhine-I Tx timeouts - - LK1.1.19 (Roger Luethi) - - Increase Tx threshold for unspecified errors - - LK1.2.0-2.6 (Roger Luethi) - - Massive clean-up - - Rewrite PHY, media handling (remove options, full_duplex, backoff) - - Fix Tx engine race for good - - Craig Brind: Zero padded aligned buffers for short packets. + [link no longer provides useful info -jgarzik] */ #define DRV_NAME "via-rhine" -#define DRV_VERSION "1.2.0-2.6" -#define DRV_RELDATE "June-10-2004" +#define DRV_VERSION "1.4.0" +#define DRV_RELDATE "June-27-2006" /* A few user-configurable values. diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index bbbf7e274a2..207340fe8df 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -19,37 +19,13 @@ Support and updates available at http://www.scyld.com/network/yellowfin.html + [link no longer provides useful info -jgarzik] - - Linux kernel changelog: - ----------------------- - - LK1.1.1 (jgarzik): Port to 2.4 kernel - - LK1.1.2 (jgarzik): - * Merge in becker version 1.05 - - LK1.1.3 (jgarzik): - * Various cleanups - * Update yellowfin_timer to correctly calculate duplex. - (suggested by Manfred Spraul) - - LK1.1.4 (val@nmt.edu): - * Fix three endian-ness bugs - * Support dual function SYM53C885E ethernet chip - - LK1.1.5 (val@nmt.edu): - * Fix forced full-duplex bug I introduced - - LK1.1.6 (val@nmt.edu): - * Only print warning on truly "oversized" packets - * Fix theoretical bug on gigabit cards - return to 1.1.3 behavior - */ #define DRV_NAME "yellowfin" -#define DRV_VERSION "1.05+LK1.1.6" -#define DRV_RELDATE "Feb 11, 2002" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "Jun 27, 2006" #define PFX DRV_NAME ": " |