diff options
-rw-r--r-- | arch/arm/mach-omap2/board-devkit8000.c | 22 |
1 files changed, 0 insertions, 22 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 83f28aec32b..4d6320a781a 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -168,15 +168,10 @@ static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev) { } - static struct regulator_consumer_supply devkit8000_vmmc1_supply = { .supply = "vmmc", }; -static struct regulator_consumer_supply devkit8000_vsim_supply = { - .supply = "vmmc_aux", -}; - /* ads7846 on SPI */ static struct regulator_consumer_supply devkit8000_vio_supplies[] = { REGULATOR_SUPPLY("vcc", "spi2.0") @@ -281,7 +276,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* link regulators to MMC adapters */ devkit8000_vmmc1_supply.dev = mmc[0].dev; - devkit8000_vsim_supply.dev = mmc[0].dev; /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -334,21 +328,6 @@ static struct regulator_init_data devkit8000_vmmc1 = { .consumer_supplies = &devkit8000_vmmc1_supply, }; -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data devkit8000_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vsim_supply, -}; - /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ static struct regulator_init_data devkit8000_vdac = { .constraints = { @@ -414,7 +393,6 @@ static struct twl4030_platform_data devkit8000_twldata = { .gpio = &devkit8000_gpio_data, .codec = &devkit8000_codec_data, .vmmc1 = &devkit8000_vmmc1, - .vsim = &devkit8000_vsim, .vdac = &devkit8000_vdac, .vpll1 = &devkit8000_vpll1, .vio = &devkit8000_vio, |