diff options
| -rw-r--r-- | drivers/i2c/algos/i2c-algo-pcf.c | 48 | ||||
| -rw-r--r-- | include/linux/i2c-algo-pcf.h | 6 |
2 files changed, 37 insertions, 17 deletions
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 8907b019167..1e328d19cd6 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -78,6 +78,36 @@ static void i2c_stop(struct i2c_algo_pcf_data *adap) set_pcf(adap, 1, I2C_PCF_STOP); } +static void handle_lab(struct i2c_algo_pcf_data *adap, const int *status) +{ + DEB2(printk(KERN_INFO + "i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n", + *status)); + + /* Cleanup from LAB -- reset and enable ESO. + * This resets the PCF8584; since we've lost the bus, no + * further attempts should be made by callers to clean up + * (no i2c_stop() etc.) + */ + set_pcf(adap, 1, I2C_PCF_PIN); + set_pcf(adap, 1, I2C_PCF_ESO); + + /* We pause for a time period sufficient for any running + * I2C transaction to complete -- the arbitration logic won't + * work properly until the next START is seen. + * It is assumed the bus driver or client has set a proper value. + * + * REVISIT: should probably use msleep instead of mdelay if we + * know we can sleep. + */ + if (adap->lab_mdelay) + mdelay(adap->lab_mdelay); + + DEB2(printk(KERN_INFO + "i2c-algo-pcf.o: reset LAB condition (CSR 0x%02x)\n", + get_pcf(adap, 1))); +} + static int wait_for_bb(struct i2c_algo_pcf_data *adap) { int timeout = DEF_TIMEOUT; @@ -109,23 +139,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) { *status = get_pcf(adap, 1); } if (*status & I2C_PCF_LAB) { - DEB2(printk(KERN_INFO - "i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n", - *status)); - /* Cleanup from LAB-- reset and enable ESO. - * This resets the PCF8584; since we've lost the bus, no - * further attempts should be made by callers to clean up - * (no i2c_stop() etc.) - */ - set_pcf(adap, 1, I2C_PCF_PIN); - set_pcf(adap, 1, I2C_PCF_ESO); - /* TODO: we should pause for a time period sufficient for any - * running I2C transaction to complete-- the arbitration - * logic won't work properly until the next START is seen. - */ - DEB2(printk(KERN_INFO - "i2c-algo-pcf.o: reset LAB condition (CSR 0x%02x)\n", - get_pcf(adap,1))); + handle_lab(adap, status); return(-EINTR); } #endif diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 77afbb60fd1..74fb6f889a7 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -36,6 +36,12 @@ struct i2c_algo_pcf_data { /* local settings */ int udelay; int timeout; + + /* Multi-master lost arbitration back-off delay (msecs) + * This should be set by the bus adapter or knowledgable client + * if bus is multi-mastered, else zero + */ + unsigned long lab_mdelay; }; int i2c_pcf_add_bus(struct i2c_adapter *); |