diff options
-rw-r--r-- | arch/arm/mach-shmobile/Kconfig | 12 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/board-ag5evm.c | 159 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/clock-sh73a0.c | 101 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/include/mach/common.h | 4 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/include/mach/entry-macro.S | 78 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/include/mach/irqs.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/include/mach/sh73a0.h | 6 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/setup-sh73a0.c | 234 | ||||
-rw-r--r-- | arch/arm/mm/Kconfig | 2 | ||||
-rw-r--r-- | drivers/serial/sh-sci.h | 7 |
11 files changed, 607 insertions, 1 deletions
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index cc543430170..e397a92888f 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -20,6 +20,12 @@ config ARCH_SH7372 select SH_CLK_CPG select ARCH_WANT_OPTIONAL_GPIOLIB +config ARCH_SH73A0 + bool "SH-Mobile AG5 (R8A73A00)" + select CPU_V7 + select SH_CLK_CPG + select ARM_GIC + comment "SH-Mobile Board Type" config MACH_G3EVM @@ -51,6 +57,10 @@ config AP4EVB_WVGA endchoice +config MACH_AG5EVM + bool "AG5EVM board" + depends on ARCH_SH73A0 + comment "SH-Mobile System Configuration" menu "Memory configuration" @@ -60,6 +70,7 @@ config MEMORY_START default "0x50000000" if MACH_G3EVM default "0x40000000" if MACH_G4EVM default "0x40000000" if MACH_AP4EVB + default "0x40000000" if MACH_AG5EVM default "0x00000000" ---help--- Tweak this only when porting to a new machine which does not @@ -71,6 +82,7 @@ config MEMORY_SIZE default "0x08000000" if MACH_G3EVM default "0x08000000" if MACH_G4EVM default "0x10000000" if MACH_AP4EVB + default "0x20000000" if MACH_AG5EVM default "0x04000000" help This sets the default memory size assumed by your kernel. It can diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index ae416fe7daf..7a8705ef6d8 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -9,6 +9,7 @@ obj-y := timer.o console.o clock.o pm_runtime.o obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o +obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o # Pinmux setup pfc-$(CONFIG_ARCH_SH7367) := pfc-sh7367.o @@ -20,3 +21,4 @@ obj-$(CONFIG_GENERIC_GPIO) += $(pfc-y) obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o +obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c new file mode 100644 index 00000000000..bade04accc8 --- /dev/null +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -0,0 +1,159 @@ +/* + * arch/arm/mach-shmobile/board-ag5evm.c + * + * Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj@renesas.com> + * Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/serial_sci.h> +#include <linux/smsc911x.h> +#include <linux/gpio.h> +#include <mach/hardware.h> +#include <mach/sh73a0.h> +#include <mach/common.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/traps.h> + +static struct resource smsc9220_resources[] = { + [0] = { + .start = 0x14000000, + .end = 0x14000000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(33), /* PINT1 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc9220_platdata = { + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct platform_device eth_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .platform_data = &smsc9220_platdata, + }, + .resource = smsc9220_resources, + .num_resources = ARRAY_SIZE(smsc9220_resources), +}; + +static struct platform_device *ag5evm_devices[] __initdata = { + ð_device, +}; + +static struct map_desc ag5evm_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +static void __init ag5evm_map_io(void) +{ + iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc)); + + /* setup early devices and console here as well */ + sh73a0_add_early_devices(); + shmobile_setup_console(); +} + +#define PINTC_ADDR 0xe6900000 +#define PINTER0A (PINTC_ADDR + 0xa0) +#define PINTCR0A (PINTC_ADDR + 0xb0) + +void __init ag5evm_init_irq(void) +{ + /* setup PINT: enable PINTA2 as active low */ + __raw_writel(__raw_readl(PINTER0A) | (1<<29), PINTER0A); + __raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A); + + gic_dist_init(0, __io(0xf0001000), 29); + gic_cpu_init(0, __io(0xf0000100)); +} + +#define PORT144CR 0xe6052090 +#define PORT145CR 0xe6052091 + +#define PORT154CR 0xe605209a +#define PORT155CR 0xe605209b +#define PORT156CR 0xe605209c +#define PORT157CR 0xe605209d + +#define PORTR159_128DR 0xe6056004 + +static void __init ag5evm_init(void) +{ + /* enable SCIFA2 */ + __raw_writeb(0x12, PORT154CR); /* TXD */ + __raw_writeb(0x22, PORT155CR); /* RXD */ + __raw_writeb(0x12, PORT156CR); /* RTS */ + __raw_writeb(0x22, PORT157CR); /* CTS */ + + /* enable SMSC911X */ + __raw_writeb(0x20, PORT144CR); /* PINTA2 */ + __raw_writeb(0x10, PORT145CR); /* RESET */ + __raw_writel(__raw_readl(PORTR159_128DR) & ~(1 << 17), PORTR159_128DR); + +#ifdef CONFIG_CACHE_L2X0 + /* Shared attribute override enable, 64K*8way */ + l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff); +#endif + sh73a0_add_standard_devices(); + platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices)); +} + +static void __init ag5evm_timer_init(void) +{ + sh73a0_clock_init(); + shmobile_timer.init(); + return; +} + +struct sys_timer ag5evm_timer = { + .init = ag5evm_timer_init, +}; + +MACHINE_START(AG5EVM, "ag5evm") + .map_io = ag5evm_map_io, + .init_irq = ag5evm_init_irq, + .init_machine = ag5evm_init, + .timer = &ag5evm_timer, +MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c new file mode 100644 index 00000000000..f2390aefefe --- /dev/null +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -0,0 +1,101 @@ +/* + * sh73a0 clock framework support + * + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/sh_clk.h> +#include <mach/common.h> +#include <asm/clkdev.h> + +#define SMSTPCR0 0xe6150130 +#define SMSTPCR1 0xe6150134 +#define SMSTPCR2 0xe6150138 +#define SMSTPCR3 0xe615013c +#define SMSTPCR4 0xe6150140 +#define SMSTPCR5 0xe6150144 + +/* Fixed 32 KHz root clock from EXTALR pin */ +static struct clk r_clk = { + .rate = 32768, +}; + +/* Temporarily fixed 48 MHz SUB clock */ +static struct clk sub_clk = { + .rate = 48000000, +}; + +static struct clk *main_clks[] = { + &r_clk, + &sub_clk, +}; + +enum { MSTP219, + MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, + MSTP331, MSTP329, + MSTP_NR }; + +#define MSTP(_parent, _reg, _bit, _flags) \ + SH_CLK_MSTP32(_parent, _reg, _bit, _flags) + +static struct clk mstp_clks[MSTP_NR] = { + [MSTP219] = MSTP(&sub_clk, SMSTPCR2, 19, 0), /* SCIFA7 */ + [MSTP207] = MSTP(&sub_clk, SMSTPCR2, 7, 0), /* SCIFA5 */ + [MSTP206] = MSTP(&sub_clk, SMSTPCR2, 6, 0), /* SCIFB */ + [MSTP204] = MSTP(&sub_clk, SMSTPCR2, 4, 0), /* SCIFA0 */ + [MSTP203] = MSTP(&sub_clk, SMSTPCR2, 3, 0), /* SCIFA1 */ + [MSTP202] = MSTP(&sub_clk, SMSTPCR2, 2, 0), /* SCIFA2 */ + [MSTP201] = MSTP(&sub_clk, SMSTPCR2, 1, 0), /* SCIFA3 */ + [MSTP200] = MSTP(&sub_clk, SMSTPCR2, 0, 0), /* SCIFA4 */ + [MSTP331] = MSTP(&sub_clk, SMSTPCR3, 31, 0), /* SCIFA6 */ + [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ +}; + +#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } + +static struct clk_lookup lookups[] = { + /* MSTP32 clocks */ + CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ + CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ + CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ + CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ +}; + +void __init sh73a0_clock_init(void) +{ + int k, ret = 0; + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + clk_init(); + else + panic("failed to setup sh73a0 clocks\n"); +} diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index efeef778a87..f1dbcdca61b 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -30,4 +30,8 @@ extern void sh7372_pinmux_init(void); extern struct clk sh7372_extal1_clk; extern struct clk sh7372_extal2_clk; +extern void sh73a0_add_early_devices(void); +extern void sh73a0_add_standard_devices(void); +extern void sh73a0_clock_init(void); + #endif /* __ARCH_MACH_COMMON_H */ diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S index a285d13c741..c0c264366d7 100644 --- a/arch/arm/mach-shmobile/include/mach/entry-macro.S +++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S @@ -20,6 +20,7 @@ .macro disable_fiq .endm +#if !defined(CONFIG_ARCH_SH73A0) .macro get_irqnr_preamble, base, tmp ldr \base, =INTFLGA .endm @@ -37,3 +38,80 @@ 1000: .endm +#else +/* + * arch/arm/mach-realview/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for RealView platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <asm/hardware/gic.h> + + .macro get_irqnr_preamble, base, tmp + ldr \base, =(0xf0000100) + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + +/* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] + /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm +#endif diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index fa15b5f8a00..09e0ab7d343 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -3,6 +3,9 @@ #define NR_IRQS 512 +/* GIC */ +#define gic_spi(nr) ((nr) + 32) + /* INTCA */ #define evt2irq(evt) (((evt) >> 5) - 16) #define irq2evt(irq) (((irq) + 16) << 5) diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h new file mode 100644 index 00000000000..5d691fe5181 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH73A0_H__ +#define __ASM_SH73A0_H__ + +/* This will soon be replaced by pinmux enums */ + +#endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c new file mode 100644 index 00000000000..0bc110615aa --- /dev/null +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -0,0 +1,234 @@ +/* + * sh73a0 processor support + * + * Copyright (C) 2010 Takashi Yoshii + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/serial_sci.h> +#include <linux/sh_intc.h> +#include <linux/sh_timer.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xe6c40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { gic_spi(72), gic_spi(72), + gic_spi(72), gic_spi(72) }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xe6c50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { gic_spi(73), gic_spi(73), + gic_spi(73), gic_spi(73) }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xe6c60000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { gic_spi(74), gic_spi(74), + gic_spi(74), gic_spi(74) }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xe6c70000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { gic_spi(75), gic_spi(75), + gic_spi(75), gic_spi(75) }, +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xe6c80000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { gic_spi(78), gic_spi(78), + gic_spi(78), gic_spi(78) }, +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + +static struct plat_sci_port scif5_platform_data = { + .mapbase = 0xe6cb0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { gic_spi(79), gic_spi(79), + gic_spi(79), gic_spi(79) }, +}; + +static struct platform_device scif5_device = { + .name = "sh-sci", + .id = 5, + .dev = { + .platform_data = &scif5_platform_data, + }, +}; + +static struct plat_sci_port scif6_platform_data = { + .mapbase = 0xe6cc0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { gic_spi(156), gic_spi(156), + gic_spi(156), gic_spi(156) }, +}; + +static struct platform_device scif6_device = { + .name = "sh-sci", + .id = 6, + .dev = { + .platform_data = &scif6_platform_data, + }, +}; + +static struct plat_sci_port scif7_platform_data = { + .mapbase = 0xe6cd0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { gic_spi(143), gic_spi(143), + gic_spi(143), gic_spi(143) }, +}; + +static struct platform_device scif7_device = { + .name = "sh-sci", + .id = 7, + .dev = { + .platform_data = &scif7_platform_data, + }, +}; + +static struct plat_sci_port scif8_platform_data = { + .mapbase = 0xe6c30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFB, + .irqs = { gic_spi(80), gic_spi(80), + gic_spi(80), gic_spi(80) }, +}; + +static struct platform_device scif8_device = { + .name = "sh-sci", + .id = 8, + .dev = { + .platform_data = &scif8_platform_data, + }, +}; + +static struct sh_timer_config cmt10_platform_data = { + .name = "CMT10", + .channel_offset = 0x10, + .timer_bit = 0, + .clockevent_rating = 125, + .clocksource_rating = 125, +}; + +static struct resource cmt10_resources[] = { + [0] = { + .name = "CMT10", + .start = 0xe6138010, + .end = 0xe613801b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(65), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt10_device = { + .name = "sh_cmt", + .id = 10, + .dev = { + .platform_data = &cmt10_platform_data, + }, + .resource = cmt10_resources, + .num_resources = ARRAY_SIZE(cmt10_resources), +}; + +static struct platform_device *sh73a0_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, + &scif6_device, + &scif7_device, + &scif8_device, + &cmt10_device, +}; + +void __init sh73a0_add_standard_devices(void) +{ + platform_add_devices(sh73a0_early_devices, + ARRAY_SIZE(sh73a0_early_devices)); +} + +void __init sh73a0_add_early_devices(void) +{ + early_platform_add_devices(sh73a0_early_devices, + ARRAY_SIZE(sh73a0_early_devices)); +} diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 4414a01e1e8..8206842ddd9 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -772,7 +772,7 @@ config CACHE_L2X0 depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \ ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 + ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE default y select OUTER_CACHE select OUTER_CACHE_SYNC diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index d2352ac437c..4bc614e4221 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -31,6 +31,7 @@ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ defined(CONFIG_ARCH_SH7372) @@ -244,6 +245,7 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ defined(CONFIG_ARCH_SH7372) @@ -280,6 +282,7 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ defined(CONFIG_ARCH_SH7372) @@ -378,6 +381,7 @@ } #if defined(CONFIG_CPU_SH3) || \ + defined(CONFIG_ARCH_SH73A0) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ defined(CONFIG_ARCH_SH7372) @@ -391,6 +395,7 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) #define SCIF_FNS(name, scif_offset, scif_size) \ @@ -433,6 +438,7 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) @@ -632,6 +638,7 @@ static inline int sci_rxd_in(struct uart_port *port) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ defined(CONFIG_ARCH_SH7372) |