diff options
84 files changed, 2421 insertions, 1484 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index e2bdd7b94fd..c4a955d2545 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -10,12 +10,16 @@ config SUPERH select EMBEDDED select HAVE_CLK select HAVE_IDE + select HAVE_LMB select HAVE_OPROFILE select HAVE_GENERIC_DMA_COHERENT select HAVE_IOREMAP_PROT if MMU select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG select HAVE_PERF_COUNTERS + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA select RTC_LIB select GENERIC_ATOMIC64 help @@ -31,6 +35,9 @@ config SUPERH32 select HAVE_FUNCTION_TRACER select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE + select HAVE_FUNCTION_TRACE_MCOUNT_TEST + select HAVE_FTRACE_SYSCALLS + select HAVE_FUNCTION_GRAPH_TRACER select HAVE_ARCH_KGDB select ARCH_HIBERNATION_POSSIBLE if MMU diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 39224b57c6e..b440fd93671 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -61,12 +61,14 @@ config EARLY_PRINTK select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using the kernel command line option to toggle back and forth. -config DEBUG_STACKOVERFLOW +config STACK_DEBUG bool "Check for stack overflows" depends on DEBUG_KERNEL && SUPERH32 help This option will cause messages to be printed if free stack space - drops below a certain limit. + drops below a certain limit. Saying Y here will add overhead to + every function call and will therefore incur a major + performance hit. Most users should say N. config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" @@ -123,4 +125,9 @@ config SH64_SR_WATCH bool "Debug: set SR.WATCH to enable hardware watchpoints and trace" depends on SUPERH64 +config MCOUNT + def_bool y + depends on SUPERH32 + depends on STACK_DEBUG || FUNCTION_TRACER + endmenu diff --git a/arch/sh/Makefile b/arch/sh/Makefile index d7358d70f15..c46b3d508f2 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -187,17 +187,23 @@ KBUILD_CFLAGS += -pipe $(cflags-y) KBUILD_CPPFLAGS += $(cflags-y) KBUILD_AFLAGS += $(cflags-y) +ifeq ($(CONFIG_MCOUNT),y) + KBUILD_CFLAGS += -pg +endif + libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) -PHONY += maketools FORCE +BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \ + zImage vmlinux.srec +PHONY += maketools $(BOOT_TARGETS) FORCE maketools: include/linux/version.h FORCE $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h all: $(KBUILD_IMAGE) -zImage uImage uImage.srec vmlinux.srec: vmlinux +$(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ compressed: zImage @@ -209,10 +215,13 @@ archclean: $(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall define archhelp - @echo '* zImage - Compressed kernel image' + @echo ' zImage - Compressed kernel image' @echo ' vmlinux.srec - Create an ELF S-record' - @echo ' uImage - Create a bootable image for U-Boot' - @echo ' uImage.srec - Create an S-record for U-Boot' + @echo '* uImage - Alias to bootable U-Boot image' + @echo ' uImage.srec - Create an S-record for U-Boot' + @echo '* uImage.gz - Kernel-only image for U-Boot (gzip)' + @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)' + @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)' endef CLEAN_FILES += include/asm-sh/machtypes.h diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index 1639f891500..566e69d8d72 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -22,6 +22,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/usb/r8a66597.h> +#include <linux/usb/m66592.h> #include <net/ax88796.h> #include <asm/machvec.h> #include <mach/highlander.h> @@ -60,6 +61,11 @@ static struct platform_device r8a66597_usb_host_device = { .resource = r8a66597_usb_host_resources, }; +static struct m66592_platdata usbf_platdata = { + .xtal = M66592_PLATDATA_XTAL_24MHZ, + .vif = 1, +}; + static struct resource m66592_usb_peripheral_resources[] = { [0] = { .name = "m66592_udc", @@ -81,6 +87,7 @@ static struct platform_device m66592_usb_peripheral_device = { .dev = { .dma_mask = NULL, /* don't use dma */ .coherent_dma_mask = 0xffffffff, + .platform_data = &usbf_platdata, }, .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources), .resource = m66592_usb_peripheral_resources, diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 8fed45a2fb8..4fb7e48e284 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -304,6 +304,7 @@ static struct platform_device sh_eth_device = { }; static struct r8a66597_platdata sh7724_usb0_host_data = { + .on_chip = 1, }; static struct resource sh7724_usb0_host_resources[] = { diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index 8913ae39a80..efe4cb9f8a7 100644 --- a/arch/sh/boards/mach-x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/usb/r8a66597.h> +#include <linux/usb/m66592.h> #include <asm/ilsel.h> static struct resource heartbeat_resources[] = { @@ -89,6 +90,11 @@ static struct platform_device r8a66597_usb_host_device = { .resource = r8a66597_usb_host_resources, }; +static struct m66592_platdata usbf_platdata = { + .xtal = M66592_PLATDATA_XTAL_24MHZ, + .vif = 1, +}; + static struct resource m66592_usb_peripheral_resources[] = { [0] = { .name = "m66592_udc", @@ -109,6 +115,7 @@ static struct platform_device m66592_usb_peripheral_device = { .dev = { .dma_mask = NULL, /* don't use dma */ .coherent_dma_mask = 0xffffffff, + .platform_data = &usbf_platdata, }, .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources), .resource = m66592_usb_peripheral_resources, diff --git a/arch/sh/boot/.gitignore b/arch/sh/boot/.gitignore index aad5edddf93..541087d2029 100644 --- a/arch/sh/boot/.gitignore +++ b/arch/sh/boot/.gitignore @@ -1,4 +1,3 @@ zImage -vmlinux.srec -uImage -uImage.srec +vmlinux* +uImage* diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 78efb04c28f..dd2a852041e 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -20,7 +20,12 @@ CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000 CONFIG_ENTRY_OFFSET ?= 0x00001000 -targets := zImage vmlinux.srec uImage uImage.srec +suffix-$(CONFIG_KERNEL_GZIP) := gz +suffix-$(CONFIG_KERNEL_BZIP2) := bz2 +suffix-$(CONFIG_KERNEL_LZMA) := lzma + +targets := zImage vmlinux.srec uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma +extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma subdir- := compressed $(obj)/zImage: $(obj)/compressed/vmlinux FORCE @@ -40,9 +45,6 @@ KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_MEMORY_START)]') endif -export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \ - CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY - KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_PAGE_OFFSET) + \ $(KERNEL_MEMORY) + \ @@ -55,19 +57,30 @@ KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \ quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ - -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \ + -C $(2) -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@ -$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,uimage) - @echo ' Image $@ is ready' - $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE + $(call if_changed,bzip2) + +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzma) + +$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2 + $(call if_changed,uimage,bzip2) + +$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz + $(call if_changed,uimage,gzip) + +$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma + $(call if_changed,uimage,lzma) + OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux $(call if_changed,objcopy) @@ -76,5 +89,9 @@ OBJCOPYFLAGS_uImage.srec := -I binary -O srec $(obj)/uImage.srec: $(obj)/uImage $(call if_changed,objcopy) -clean-files += uImage uImage.srec vmlinux.srec \ - vmlinux.bin vmlinux.bin.gz +$(obj)/uImage: $(obj)/uImage.$(suffix-y) + @ln -sf $(notdir $<) $@ + @echo ' Image $@ is ready' + +export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \ + CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY suffix-y diff --git a/arch/sh/boot/compressed/.gitignore b/arch/sh/boot/compressed/.gitignore new file mode 100644 index 00000000000..2374a83d87b --- /dev/null +++ b/arch/sh/boot/compressed/.gitignore @@ -0,0 +1 @@ +vmlinux.bin.* diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index 9531bf1b7c2..6182eca5180 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -5,9 +5,10 @@ # targets := vmlinux vmlinux.bin vmlinux.bin.gz \ - head_$(BITS).o misc_$(BITS).o piggy.o + vmlinux.bin.bz2 vmlinux.bin.lzma \ + head_$(BITS).o misc.o piggy.o -OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o +OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o ifdef CONFIG_SH_STANDARD_BIOS OBJECTS += $(obj)/../../kernel/sh_bios.o @@ -23,7 +24,7 @@ IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) -ifeq ($(CONFIG_FUNCTION_TRACER),y) +ifeq ($(CONFIG_MCOUNT),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif @@ -38,10 +39,18 @@ $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE +vmlinux.bin.all-y := $(obj)/vmlinux.bin + +$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE + $(call if_changed,bzip2) +$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE + $(call if_changed,lzma) OBJCOPYFLAGS += -R .empty_zero_page -$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,as_o_S) +LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE + $(call if_changed,ld) diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c new file mode 100644 index 00000000000..fd56a71ca9d --- /dev/null +++ b/arch/sh/boot/compressed/misc.c @@ -0,0 +1,149 @@ +/* + * arch/sh/boot/compressed/misc.c + * + * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * + * Adapted for SH by Stuart Menefy, Aug 1999 + * + * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000 + */ + +#include <asm/uaccess.h> +#include <asm/addrspace.h> +#include <asm/page.h> +#include <asm/sh_bios.h> + +/* + * gzip declarations + */ + +#define STATIC static + +#undef memset +#undef memcpy +#define memzero(s, n) memset ((s), 0, (n)) + +/* cache.c */ +#define CACHE_ENABLE 0 +#define CACHE_DISABLE 1 +int cache_control(unsigned int command); + +extern char input_data[]; +extern int input_len; +static unsigned char *output; + +static void error(char *m); + +int puts(const char *); + +extern int _text; /* Defined in vmlinux.lds.S */ +extern int _end; +static unsigned long free_mem_ptr; +static unsigned long free_mem_end_ptr; + +#ifdef CONFIG_HAVE_KERNEL_BZIP2 +#define HEAP_SIZE 0x400000 +#else +#define HEAP_SIZE 0x10000 +#endif + +#ifdef CONFIG_KERNEL_GZIP +#include "../../../../lib/decompress_inflate.c" +#endif + +#ifdef CONFIG_KERNEL_BZIP2 +#include "../../../../lib/decompress_bunzip2.c" +#endif + +#ifdef CONFIG_KERNEL_LZMA +#include "../../../../lib/decompress_unlzma.c" +#endif + +#ifdef CONFIG_SH_STANDARD_BIOS +size_t strlen(const char *s) +{ + int i = 0; + + while (*s++) + i++; + return i; +} + +int puts(const char *s) +{ + int len = strlen(s); + sh_bios_console_write(s, len); + return len; +} +#else +int puts(const char *s) +{ + /* This should be updated to use the sh-sci routines */ + return 0; +} +#endif + +void* memset(void* s, int c, size_t n) +{ + int i; + char *ss = (char*)s; + + for (i=0;i<n;i++) ss[i] = c; + return s; +} + +void* memcpy(void* __dest, __const void* __src, + size_t __n) +{ + int i; + char *d = (char *)__dest, *s = (char *)__src; + + for (i=0;i<__n;i++) d[i] = s[i]; + return __dest; +} + +static void error(char *x) +{ + puts("\n\n"); + puts(x); + puts("\n\n -- System halted"); + + while(1); /* Halt */ +} + +#ifdef CONFIG_SUPERH64 +#define stackalign 8 +#else +#define stackalign 4 +#endif + +#define STACK_SIZE (4096) +long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE]; +long *stack_start = &user_stack[STACK_SIZE]; + +void decompress_kernel(void) +{ + unsigned long output_addr; + +#ifdef CONFIG_SUPERH64 + output_addr = (CONFIG_MEMORY_START + 0x2000); +#else + output_addr = PHYSADDR((unsigned long)&_text+PAGE_SIZE); +#ifdef CONFIG_29BIT + output_addr |= P2SEG; +#endif +#endif + + output = (unsigned char *)output_addr; + free_mem_ptr = (unsigned long)&_end; + free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; + + puts("Uncompressing Linux... "); + cache_control(CACHE_ENABLE); + decompress(input_data, input_len, NULL, NULL, output, NULL, error); + cache_control(CACHE_DISABLE); + puts("Ok, booting the kernel.\n"); +} diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c deleted file mode 100644 index efdba6b2957..00000000000 --- a/arch/sh/boot/compressed/misc_32.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * arch/sh/boot/compressed/misc.c - * - * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 - * - * Adapted for SH by Stuart Menefy, Aug 1999 - * - * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000 - */ - -#include <asm/uaccess.h> -#include <asm/addrspace.h> -#include <asm/page.h> -#ifdef CONFIG_SH_STANDARD_BIOS -#include <asm/sh_bios.h> -#endif - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - -#undef memset -#undef memcpy -#define memzero(s, n) memset ((s), 0, (n)) - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -static unsigned insize = 0; /* valid bytes in inbuf */ -static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -static int fill_inbuf(void); -static void flush_window(void); -static void error(char *m); - -extern char input_data[]; -extern int input_len; - -static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; - -static void error(char *m); - -int puts(const char *); - -extern int _text; /* Defined in vmlinux.lds.S */ -extern int _end; -static unsigned long free_mem_ptr; -static unsigned long free_mem_end_ptr; - -#define HEAP_SIZE 0x10000 - -#include "../../../../lib/inflate.c" - -#ifdef CONFIG_SH_STANDARD_BIOS -size_t strlen(const char *s) -{ - int i = 0; - - while (*s++) - i++; - return i; -} - -int puts(const char *s) -{ - int len = strlen(s); - sh_bios_console_write(s, len); - return len; -} -#else -int puts(const char *s) -{ - /* This should be updated to use the sh-sci routines */ - return 0; -} -#endif - -void* memset(void* s, int c, size_t n) -{ - int i; - char *ss = (char*)s; - - for (i=0;i<n;i++) ss[i] = c; - return s; -} - -void* memcpy(void* __dest, __const void* __src, - size_t __n) -{ - int i; - char *d = (char *)__dest, *s = (char *)__src; - - for (i=0;i<__n;i++) d[i] = s[i]; - return __dest; -} - -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - */ -static int fill_inbuf(void) -{ - if (insize != 0) { - error("ran out of input data"); - } - - inbuf = input_data; - insize = input_len; - inptr = 1; - return inbuf[0]; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void flush_window(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} - -static void error(char *x) -{ - puts("\n\n"); - puts(x); - puts("\n\n -- System halted"); - - while(1); /* Halt */ -} - -#define STACK_SIZE (4096) -long user_stack [STACK_SIZE]; -long* stack_start = &user_stack[STACK_SIZE]; - -void decompress_kernel(void) -{ - output_data = NULL; - output_ptr = PHYSADDR((unsigned long)&_text+PAGE_SIZE); -#ifdef CONFIG_29BIT - output_ptr |= P2SEG; -#endif - free_mem_ptr = (unsigned long)&_end; - free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; - - makecrc(); - puts("Uncompressing Linux... "); - gunzip(); - puts("Ok, booting the kernel.\n"); -} diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c deleted file mode 100644 index 2941657e18a..00000000000 --- a/arch/sh/boot/compressed/misc_64.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * arch/sh/boot/compressed/misc_64.c - * - * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 - * - * Adapted for SHmedia from sh by Stuart Menefy, May 2002 - */ - -#include <asm/uaccess.h> - -/* cache.c */ -#define CACHE_ENABLE 0 -#define CACHE_DISABLE 1 -int cache_control(unsigned int command); - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - -#undef memset -#undef memcpy -#define memzero(s, n) memset ((s), 0, (n)) - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -static unsigned insize = 0; /* valid bytes in inbuf */ -static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -static int fill_inbuf(void); -static void flush_window(void); -static void error(char *m); - -extern char input_data[]; -extern int input_len; - -static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; - -static void error(char *m); - -static void puts(const char *); - -extern int _text; /* Defined in vmlinux.lds.S */ -extern int _end; -static unsigned long free_mem_ptr; -static unsigned long free_mem_end_ptr; - -#define HEAP_SIZE 0x10000 - -#include "../../../../lib/inflate.c" - -void puts(const char *s) -{ -} - -void *memset(void *s, int c, size_t n) -{ - int i; - char *ss = (char *) s; - - for (i = 0; i < n; i++) - ss[i] = c; - return s; -} - -void *memcpy(void *__dest, __const void *__src, size_t __n) -{ - int i; - char *d = (char *) __dest, *s = (char *) __src; - - for (i = 0; i < __n; i++) - d[i] = s[i]; - return __dest; -} - -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - */ -static int fill_inbuf(void) -{ - if (insize != 0) { - error("ran out of input data\n"); - } - - inbuf = input_data; - insize = input_len; - inptr = 1; - return inbuf[0]; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void flush_window(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int) c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg) outcnt; - output_ptr += (ulg) outcnt; - outcnt = 0; - puts("."); -} - -static void error(char *x) -{ - puts("\n\n"); - puts(x); - puts("\n\n -- System halted"); - - while (1) ; /* Halt */ -} - -#define STACK_SIZE (4096) -long __attribute__ ((aligned(8))) user_stack[STACK_SIZE]; -long *stack_start = &user_stack[STACK_SIZE]; - -void decompress_kernel(void) -{ - output_data = (uch *) (CONFIG_MEMORY_START + 0x2000); - free_mem_ptr = (unsigned long) &_end; - free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; - - makecrc(); - puts("Uncompressing Linux... "); - cache_control(CACHE_ENABLE); - gunzip(); - puts("\n"); - -#if 0 - /* When booting from ROM may want to do something like this if the - * boot loader doesn't. - */ - - /* Set up the parameters and command line */ - { - volatile unsigned int *parambase = - (int *) (CONFIG_MEMORY_START + 0x1000); - - parambase[0] = 0x1; /* MOUNT_ROOT_RDONLY */ - parambase[1] = 0x0; /* RAMDISK_FLAGS */ - parambase[2] = 0x0200; /* ORIG_ROOT_DEV */ - parambase[3] = 0x0; /* LOADER_TYPE */ - parambase[4] = 0x0; /* INITRD_START */ - parambase[5] = 0x0; /* INITRD_SIZE */ - parambase[6] = 0; - - strcpy((char *) ((int) parambase + 0x100), - "console=ttySC0,38400"); - } -#endif - - puts("Ok, booting the kernel.\n"); - - cache_control(CACHE_DISABLE); -} diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S deleted file mode 100644 index 566071926b1..00000000000 --- a/arch/sh/boot/compressed/piggy.S +++ /dev/null @@ -1,8 +0,0 @@ - .global input_len, input_data - .data -input_len: - .long input_data_end - input_data -input_data: - .incbin "arch/sh/boot/compressed/vmlinux.bin.gz" -input_data_end: - .end diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr new file mode 100644 index 00000000000..f02382ae5c4 --- /dev/null +++ b/arch/sh/boot/compressed/vmlinux.scr @@ -0,0 +1,10 @@ +SECTIONS +{ + .rodata.compressed : { + input_len = .; + LONG(input_data_end - input_data) input_data = .; + *(.data) + output_len = . - 4; + input_data_end = .; + } +} diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h index 8fea7d8c825..7e0bcc4d4a9 100644 --- a/arch/sh/include/asm/ftrace.h +++ b/arch/sh/include/asm/ftrace.h @@ -11,10 +11,13 @@ extern void mcount(void); #define MCOUNT_ADDR ((long)(mcount)) #ifdef CONFIG_DYNAMIC_FTRACE -#define CALLER_ADDR ((long)(ftrace_caller)) +#define CALL_ADDR ((long)(ftrace_call)) #define STUB_ADDR ((long)(ftrace_stub)) +#define GRAPH_ADDR ((long)(ftrace_graph_call)) +#define CALLER_ADDR ((long)(ftrace_caller)) -#define MCOUNT_INSN_OFFSET ((STUB_ADDR - CALLER_ADDR) >> 1) +#define MCOUNT_INSN_OFFSET ((STUB_ADDR - CALL_ADDR) - 4) +#define GRAPH_INSN_OFFSET ((CALLER_ADDR - GRAPH_ADDR) - 4) struct dyn_arch_ftrace { /* No extra data needed on sh */ diff --git a/arch/sh/include/asm/hwblk.h b/arch/sh/include/asm/hwblk.h new file mode 100644 index 00000000000..c01d72cb675 --- /dev/null +++ b/arch/sh/include/asm/hwblk.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_HWBLK_H +#define __ASM_SH_HWBLK_H + +#include <asm/clock.h> +#include <asm/io.h> + +#define HWBLK_CNT_USAGE 0 +#define HWBLK_CNT_NR 1 + +#define HWBLK_AREA_FLAG_PARENT (1 << 0) /* valid parent */ + +#define HWBLK_AREA(_flags, _parent) \ +{ \ + .flags = _flags, \ + .parent = _parent, \ +} + +struct hwblk_area { + int cnt[HWBLK_CNT_NR]; + unsigned char parent; + unsigned char flags; +}; + +#define HWBLK(_mstp, _bit, _area) \ +{ \ + .mstp = (void __iomem *)_mstp, \ + .bit = _bit, \ + .area = _area, \ +} + +struct hwblk { + void __iomem *mstp; + unsigned char bit; + unsigned char area; + int cnt[HWBLK_CNT_NR]; +}; + +struct hwblk_info { + struct hwblk_area *areas; + int nr_areas; + struct hwblk *hwblks; + int nr_hwblks; +}; + +/* Should be defined by processor-specific code */ +int arch_hwblk_init(void); +int arch_hwblk_sleep_mode(void); + +int hwblk_register(struct hwblk_info *info); +int hwblk_init(void); + +void hwblk_enable(struct hwblk_info *info, int hwblk); +void hwblk_disable(struct hwblk_info *info, int hwblk); + +void hwblk_cnt_inc(struct hwblk_info *info, int hwblk, int cnt); +void hwblk_cnt_dec(struct hwblk_info *info, int hwblk, int cnt); + +/* allow clocks to enable and disable hardware blocks */ +#define SH_HWBLK_CLK(_name, _id, _parent, _hwblk, _flags) \ +{ \ + .name = _name, \ + .id = _id, \ + .parent = _parent, \ + .arch_flags = _hwblk, \ + .flags = _flags, \ +} + +int sh_hwblk_clk_register(struct clk *clks, int nr); + +#endif /* __ASM_SH_HWBLK_H */ diff --git a/arch/sh/include/asm/lmb.h b/arch/sh/include/asm/lmb.h new file mode 100644 index 00000000000..9b437f657ff --- /dev/null +++ b/arch/sh/include/asm/lmb.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_LMB_H +#define __ASM_SH_LMB_H + +#define LMB_REAL_LIMIT 0 + +#endif /* __ASM_SH_LMB_H */ diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h index 72ea209195b..0db19db913c 100644 --- a/arch/sh/include/asm/pgtable_32.h +++ b/arch/sh/include/asm/pgtable_32.h @@ -20,7 +20,7 @@ * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE. * * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages. - * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused. + * Bit 10 is used for _PAGE_ACCESSED, and bit 11 is used for _PAGE_SPECIAL. * * - On 29 bit platforms, bits 31 to 29 are used for the space attributes * and timing control which (together with bit 0) are moved into the @@ -52,6 +52,7 @@ #define _PAGE_PROTNONE 0x200 /* software: if not present */ #define _PAGE_ACCESSED 0x400 /* software: page referenced */ #define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ +#define _PAGE_SPECIAL 0x800 /* software: special page */ #define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1) #define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER) @@ -148,8 +149,12 @@ # define _PAGE_SZHUGE (_PAGE_FLAGS_HARD) #endif +/* + * Mask of bits that are to be preserved accross pgprot changes. + */ #define _PAGE_CHG_MASK \ - (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) + (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_SPECIAL) #ifndef __ASSEMBLY__ @@ -328,7 +333,7 @@ static inline void set_pte(pte_t *ptep, pte_t pte) #define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY) #define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED) #define pte_file(pte) ((pte).pte_low & _PAGE_FILE) -#define pte_special(pte) (0) +#define pte_special(pte) ((pte).pte_low & _PAGE_SPECIAL) #ifdef CONFIG_X2TLB #define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) @@ -358,8 +363,9 @@ PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY); PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY); PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED); PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED); +PTE_BIT_FUNC(low, mkspecial, |= _PAGE_SPECIAL); -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } +#define __HAVE_ARCH_PTE_SPECIAL /* * Macro and implementation to make a page protection as uncachable. diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h index b1b995370e7..5c8ea28ff7a 100644 --- a/arch/sh/include/asm/suspend.h +++ b/arch/sh/include/asm/suspend.h @@ -10,6 +10,15 @@ struct swsusp_arch_regs { struct pt_regs user_regs; unsigned long bank1_regs[8]; }; + +void sh_mobile_call_standby(unsigned long mode); + +#ifdef CONFIG_CPU_IDLE +void sh_mobile_setup_cpuidle(void); +#else +static inline void sh_mobile_setup_cpuidle(void) {} +#endif + #endif /* flags passed to assembly suspend code */ diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h index 6f83f2cc45c..7d80df4f09c 100644 --- a/arch/sh/include/asm/syscall_32.h +++ b/arch/sh/include/asm/syscall_32.h @@ -65,6 +65,7 @@ static inline void syscall_get_arguments(struct task_struct *task, case 3: args[2] = regs->regs[6]; case 2: args[1] = regs->regs[5]; case 1: args[0] = regs->regs[4]; + case 0: break; default: BUG(); diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index d570ac2e5cb..5123bcaa850 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -97,7 +97,7 @@ static inline struct thread_info *current_thread_info(void) extern struct thread_info *alloc_thread_info(struct task_struct *tsk); extern void free_thread_info(struct thread_info *ti); - + #endif /* THREAD_SHIFT < PAGE_SHIFT */ #endif /* __ASSEMBLY__ */ @@ -116,6 +116,7 @@ extern void free_thread_info(struct thread_info *ti); #define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ #define TIF_SECCOMP 6 /* secure computing */ #define TIF_NOTIFY_RESUME 7 /* callback before returning to user */ +#define TIF_SYSCALL_FTRACE 8 /* for ftrace syscall instrumentation */ #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 @@ -129,25 +130,27 @@ extern void free_thread_info(struct thread_info *ti); #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) +#define _TIF_SYSCALL_FTRACE (1 << TIF_SYSCALL_FTRACE) #define _TIF_USEDFPU (1 << TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_FREEZE (1 << TIF_FREEZE) /* - * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within a byte, or we + * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within 2 bytes, or we * blow the tst immediate size constraints and need to fix up * arch/sh/kernel/entry-common.S. */ /* work to do in syscall trace */ #define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \ - _TIF_SYSCALL_AUDIT | _TIF_SECCOMP) + _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \ + _TIF_SYSCALL_FTRACE) /* work to do on any return to u-space */ #define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \ _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \ _TIF_SINGLESTEP | _TIF_RESTORE_SIGMASK | \ - _TIF_NOTIFY_RESUME) + _TIF_NOTIFY_RESUME | _TIF_SYSCALL_FTRACE) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \ diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h index 738ea43c503..48560407cbe 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7722.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h @@ -221,4 +221,18 @@ enum { GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5, }; +enum { + HWBLK_UNKNOWN = 0, + HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_URAM, HWBLK_XYMEM, + HWBLK_INTC, HWBLK_DMAC, HWBLK_SHYWAY, HWBLK_HUDI, + HWBLK_UBC, HWBLK_TMU, HWBLK_CMT, HWBLK_RWDT, HWBLK_FLCTL, + HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_SIO, + HWBLK_SIOF0, HWBLK_SIOF1, HWBLK_IIC, HWBLK_RTC, + HWBLK_TPU, HWBLK_IRDA, HWBLK_SDHI, HWBLK_SIM, HWBLK_KEYSC, + HWBLK_TSIF, HWBLK_USBF, HWBLK_2DG, HWBLK_SIU, HWBLK_VOU, + HWBLK_JPU, HWBLK_BEU, HWBLK_CEU, HWBLK_VEU, HWBLK_VPU, + HWBLK_LCDC, + HWBLK_NR, +}; + #endif /* __ASM_SH7722_H__ */ diff --git a/arch/sh/include/cpu-sh4/cpu/sh7723.h b/arch/sh/include/cpu-sh4/cpu/sh7723.h index 14c8ca93678..9b36fae7232 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7723.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7723.h @@ -265,4 +265,21 @@ enum { GPIO_FN_IDEA1, GPIO_FN_IDEA0, }; +enum { + HWBLK_UNKNOWN = 0, + HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_L2C, HWBLK_ILMEM, HWBLK_FPU, + HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY, + HWBLK_HUDI, HWBLK_DBG, HWBLK_UBC, HWBLK_SUBC, + HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1, + HWBLK_FLCTL, + HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, + HWBLK_SCIF3, HWBLK_SCIF4, HWBLK_SCIF5, + HWBLK_MSIOF0, HWBLK_MSIOF1, HWBLK_MERAM, HWBLK_IIC, HWBLK_RTC, + HWBLK_ATAPI, HWBLK_ADC, HWBLK_TPU, HWBLK_IRDA, HWBLK_TSIF, HWBLK_ICB, + HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_KEYSC, HWBLK_USB, + HWBLK_2DG, HWBLK_SIU, HWBLK_VEU2H1, HWBLK_VOU, HWBLK_BEU, HWBLK_CEU, + HWBLK_VEU2H0, HWBLK_VPU, HWBLK_LCDC, + HWBLK_NR, +}; + #endif /* __ASM_SH7723_H__ */ diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 9411e3e31e6..94ed99b6800 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -29,6 +29,8 @@ obj-$(CONFIG_IO_TRAPPED) += io_trapped.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o +obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o +obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o obj-$(CONFIG_DUMP_CODE) += disassemble.o obj-$(CONFIG_HIBERNATION) += swsusp.o diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c index 99aceb28ee2..d218e808294 100644 --- a/arch/sh/kernel/asm-offsets.c +++ b/arch/sh/kernel/asm-offsets.c @@ -26,6 +26,7 @@ int main(void) DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count)); DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block)); + DEFINE(TI_SIZE, sizeof(struct thread_info)); #ifdef CONFIG_HIBERNATION DEFINE(PBE_ADDRESS, offsetof(struct pbe, address)); diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index eecad7cbd61..3d6b9312dc4 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -19,4 +19,4 @@ obj-$(CONFIG_UBC_WAKEUP) += ubc.o obj-$(CONFIG_SH_ADC) += adc.o obj-$(CONFIG_SH_CLK_CPG) += clock-cpg.o -obj-y += irq/ init.o clock.o +obj-y += irq/ init.o clock.o hwblk.o diff --git a/arch/sh/kernel/cpu/hwblk.c b/arch/sh/kernel/cpu/hwblk.c new file mode 100644 index 00000000000..c0ad7d46e78 --- /dev/null +++ b/arch/sh/kernel/cpu/hwblk.c @@ -0,0 +1,155 @@ +#include <linux/clk.h> +#include <linux/compiler.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <asm/suspend.h> +#include <asm/hwblk.h> +#include <asm/clock.h> + +static DEFINE_SPINLOCK(hwblk_lock); + +static void hwblk_area_mod_cnt(struct hwblk_info *info, + int area, int counter, int value, int goal) +{ + struct hwblk_area *hap = info->areas + area; + + hap->cnt[counter] += value; + + if (hap->cnt[counter] != goal) + return; + + if (hap->flags & HWBLK_AREA_FLAG_PARENT) + hwblk_area_mod_cnt(info, hap->parent, counter, value, goal); +} + + +static int __hwblk_mod_cnt(struct hwblk_info *info, int hwblk, + int counter, int value, int goal) +{ + struct hwblk *hp = info->hwblks + hwblk; + + hp->cnt[counter] += value; + if (hp->cnt[counter] == goal) + hwblk_area_mod_cnt(info, hp->area, counter, value, goal); + + return hp->cnt[counter]; +} + +static void hwblk_mod_cnt(struct hwblk_info *info, int hwblk, + int counter, int value, int goal) +{ + unsigned long flags; + + spin_lock_irqsave(&hwblk_lock, flags); + __hwblk_mod_cnt(info, hwblk, counter, value, goal); + spin_unlock_irqrestore(&hwblk_lock, flags); +} + +void hwblk_cnt_inc(struct hwblk_info *info, int hwblk, int counter) +{ + hwblk_mod_cnt(info, hwblk, counter, 1, 1); +} + +void hwblk_cnt_dec(struct hwblk_info *info, int hwblk, int counter) +{ + hwblk_mod_cnt(info, hwblk, counter, -1, 0); +} + +void hwblk_enable(struct hwblk_info *info, int hwblk) +{ + struct hwblk *hp = info->hwblks + hwblk; + unsigned long tmp; + unsigned long flags; + int ret; + + spin_lock_irqsave(&hwblk_lock, flags); + + ret = __hwblk_mod_cnt(info, hwblk, HWBLK_CNT_USAGE, 1, 1); + if (ret == 1) { + tmp = __raw_readl(hp->mstp); + tmp &= ~(1 << hp->bit); + __raw_writel(tmp, hp->mstp); + } + + spin_unlock_irqrestore(&hwblk_lock, flags); +} + +void hwblk_disable(struct hwblk_info *info, int hwblk) +{ + struct hwblk *hp = info->hwblks + hwblk; + unsigned long tmp; + unsigned long flags; + int ret; + + spin_lock_irqsave(&hwblk_lock, flags); + + ret = __hwblk_mod_cnt(info, hwblk, HWBLK_CNT_USAGE, -1, 0); + if (ret == 0) { + tmp = __raw_readl(hp->mstp); + tmp |= 1 << hp->bit; + __raw_writel(tmp, hp->mstp); + } + + spin_unlock_irqrestore(&hwblk_lock, flags); +} + +struct hwblk_info *hwblk_info; + +int __init hwblk_register(struct hwblk_info *info) +{ + hwblk_info = info; + return 0; +} + +int __init __weak arch_hwblk_init(void) +{ + return 0; +} + +int __weak arch_hwblk_sleep_mode(void) +{ + return SUSP_SH_SLEEP; +} + +int __init hwblk_init(void) +{ + return arch_hwblk_init(); +} + +/* allow clocks to enable and disable hardware blocks */ +static int sh_hwblk_clk_enable(struct clk *clk) +{ + if (!hwblk_info) + return -ENOENT; + + hwblk_enable(hwblk_info, clk->arch_flags); + return 0; +} + +static void sh_hwblk_clk_disable(struct clk *clk) +{ + if (hwblk_info) + hwblk_disable(hwblk_info, clk->arch_flags); +} + +static struct clk_ops sh_hwblk_clk_ops = { + .enable = sh_hwblk_clk_enable, + .disable = sh_hwblk_clk_disable, + .recalc = followparent_recalc, +}; + +int __init sh_hwblk_clk_register(struct clk *clks, int nr) +{ + struct clk *clkp; + int ret = 0; + int k; + + for (k = 0; !ret && (k < nr); k++) { + clkp = clks + k; + clkp->ops = &sh_hwblk_clk_ops; + ret |= clk_register(clkp); + } + + return ret; +} diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 13798733f2d..8555c05e866 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -187,7 +187,7 @@ static int __init sh7619_devices_setup(void) return platform_add_devices(sh7619_devices, ARRAY_SIZE(sh7619_devices)); } -__initcall(sh7619_devices_setup); +arch_initcall(sh7619_devices_setup); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c index 869c2da4820..b6737644531 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c +++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c @@ -238,7 +238,7 @@ static int __init mxg_devices_setup(void) return platform_add_devices(mxg_devices, ARRAY_SIZE(mxg_devices)); } -__initcall(mxg_devices_setup); +arch_initcall(mxg_devices_setup); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c index d8febe12806..fbde5b75deb 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c @@ -357,7 +357,7 @@ static int __init sh7201_devices_setup(void) return platform_add_devices(sh7201_devices, ARRAY_SIZE(sh7201_devices)); } -__initcall(sh7201_devices_setup); +arch_initcall(sh7201_devices_setup); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index 62e3039d239..d3fd536c9a8 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -367,7 +367,7 @@ static int __init sh7203_devices_setup(void) return platform_add_devices(sh7203_devices, ARRAY_SIZE(sh7203_devices)); } -__initcall(sh7203_devices_setup); +arch_initcall(sh7203_devices_setup); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index 3e6f3d7a58b..a9ccc5e8d9e 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -338,7 +338,7 @@ static int __init sh7206_devices_setup(void) return platform_add_devices(sh7206_devices, ARRAY_SIZE(sh7206_devices)); } -__initcall(sh7206_devices_setup); +arch_initcall(sh7206_devices_setup); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index 88f742fed9e..c2310598387 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -222,7 +222,7 @@ static int __init sh7705_devices_setup(void) return platform_add_devices(sh7705_devices, ARRAY_SIZE(sh7705_devices)); } -__initcall(sh7705_devices_setup); +arch_initcall(sh7705_devices_setup); static struct platform_device *sh7705_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index c5630679858..347ab35d069 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -250,7 +250,7 @@ static int __init sh770x_devices_setup(void) return platform_add_devices(sh770x_devices, ARRAY_SIZE(sh770x_devices)); } -__initcall(sh770x_devices_setup); +arch_initcall(sh770x_devices_setup); static struct platform_device *sh770x_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index efa76c8148f..717e90ae109 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -226,7 +226,7 @@ static int __init sh7710_devices_setup(void) return platform_add_devices(sh7710_devices, ARRAY_SIZE(sh7710_devices)); } -__initcall(sh7710_devices_setup); +arch_initcall(sh7710_devices_setup); static struct platform_device *sh7710_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 5b2107798ed..74d8baaf8e9 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -388,7 +388,7 @@ static int __init sh7720_devices_setup(void) return platform_add_devices(sh7720_devices, ARRAY_SIZE(sh7720_devices)); } -__initcall(sh7720_devices_setup); +arch_initcall(sh7720_devices_setup); static struct platform_device *sh7720_early_devices[] __initdata = { &cmt0_device, diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c index 6d088d12359..de4827df19a 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -138,7 +138,7 @@ static int __init sh4202_devices_setup(void) return platform_add_devices(sh4202_devices, ARRAY_SIZE(sh4202_devices)); } -__initcall(sh4202_devices_setup); +arch_initcall(sh4202_devices_setup); static struct platform_device *sh4202_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 851672d15cf..1b8b122e8f3 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -239,7 +239,7 @@ static int __init sh7750_devices_setup(void) return platform_add_devices(sh7750_devices, ARRAY_SIZE(sh7750_devices)); } -__initcall(sh7750_devices_setup); +arch_initcall(sh7750_devices_setup); static struct platform_device *sh7750_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 5b822519bd9..7fbb7be9284 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -265,7 +265,7 @@ static int __init sh7760_devices_setup(void) return platform_add_devices(sh7760_devices, ARRAY_SIZE(sh7760_devices)); } -__initcall(sh7760_devices_setup); +arch_initcall(sh7760_devices_setup); static struct platform_device *sh7760_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index ebdd391d5f4..1d7ae38bc61 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -25,8 +25,8 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o clock-$(CONFIG_CPU_SUBTYPE_SH7786) := clock-sh7786.o clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o -clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o -clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7723.o +clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o hwblk-sh7722.o +clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7723.o hwblk-sh7723.o clock-$(CONFIG_CPU_SUBTYPE_SH7724) := clock-sh7724.o clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7366.o clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 40f859354f7..1fa9e1dd1cc 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -22,6 +22,8 @@ #include <linux/kernel.h> #include <linux/io.h> #include <asm/clock.h> +#include <asm/hwblk.h> +#include <cpu/sh7722.h> /* SH7722 registers */ #define FRQCR 0xa4150000 @@ -140,35 +142,37 @@ struct clk div6_clks[] = { SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0), }; -#define MSTP(_str, _parent, _reg, _bit, _flags) \ - SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _flags) +#define R_CLK &r_clk +#define P_CLK &div4_clks[DIV4_P] +#define B_CLK &div4_clks[DIV4_B] +#define U_CLK &div4_clks[DIV4_U] static struct clk mstp_clks[] = { - MSTP("uram0", &div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT), - MSTP("xymem0", &div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT), - MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0), - MSTP("cmt0", &r_clk, MSTPCR0, 14, 0), - MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0), - MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0), - MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 7, 0), - MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 6, 0), - MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 5, 0), - - MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0), - MSTP("rtc0", &r_clk, MSTPCR1, 8, 0), - - MSTP("sdhi0", &div4_clks[DIV4_P], MSTPCR2, 18, 0), - MSTP("keysc0", &r_clk, MSTPCR2, 14, 0), - MSTP("usbf0", &div4_clks[DIV4_P], MSTPCR2, 11, 0), - MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 9, 0), - MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0), - MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0), - MSTP("jpu0", &div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT), - MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0), - MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0), - MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT), - MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT), - MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0), + SH_HWBLK_CLK("uram0", -1, U_CLK, HWBLK_URAM, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("xymem0", -1, B_CLK, HWBLK_XYMEM, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU, 0), + SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0), + SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0), + SH_HWBLK_CLK("flctl0", -1, P_CLK, HWBLK_FLCTL, 0), + SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0), + SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0), + SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0), + + SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC, 0), + SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0), + + SH_HWBLK_CLK("sdhi0", -1, P_CLK, HWBLK_SDHI, 0), + SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0), + SH_HWBLK_CLK("usbf0", -1, P_CLK, HWBLK_USBF, 0), + SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0), + SH_HWBLK_CLK("siu0", -1, B_CLK, HWBLK_SIU, 0), + SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0), + SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU, 0), + SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU, 0), + SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("lcdc0", -1, P_CLK, HWBLK_LCDC, 0), }; int __init arch_clk_init(void) @@ -191,7 +195,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks)); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks)); + ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks)); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c index e67c2678b8a..bf64c78eee3 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c @@ -22,6 +22,8 @@ #include <linux/kernel.h> #include <linux/io.h> #include <asm/clock.h> +#include <asm/hwblk.h> +#include <cpu/sh7723.h> /* SH7723 registers */ #define FRQCR 0xa4150000 @@ -140,60 +142,64 @@ struct clk div6_clks[] = { SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0), }; -#define MSTP(_str, _parent, _reg, _bit, _force_on, _need_cpg, _need_ram) \ - SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _force_on * CLK_ENABLE_ON_INIT) +#define R_CLK (&r_clk) +#define P_CLK (&div4_clks[DIV4_P]) +#define B_CLK (&div4_clks[DIV4_B]) +#define U_CLK (&div4_clks[DIV4_U]) +#define I_CLK (&div4_clks[DIV4_I]) +#define SH_CLK (&div4_clks[DIV4_SH]) static struct clk mstp_clks[] = { /* See page 60 of Datasheet V1.0: Overview -> Block Diagram */ - MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, 1, 1, 0), - MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, 1, 1, 0), - MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, 1, 1, 0), - MSTP("l2c0", &div4_clks[DIV4_SH], MSTPCR0, 28, 1, 1, 0), - MSTP("ilmem0", &div4_clks[DIV4_I], MSTPCR0, 27, 1, 1, 0), - MSTP("fpu0", &div4_clks[DIV4_I], MSTPCR0, 24, 1, 1, 0), - MSTP("intc0", &div4_clks[DIV4_I], MSTPCR0, 22, 1, 1, 0), - MSTP("dmac0", &div4_clks[DIV4_B], MSTPCR0, 21, 0, 1, 1), - MSTP("sh0", &div4_clks[DIV4_SH], MSTPCR0, 20, 0, 1, 0), - MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0, 1, 0), - MSTP("ubc0", &div4_clks[DIV4_I], MSTPCR0, 17, 0, 1, 0), - MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0, 1, 0), - MSTP("cmt0", &r_clk, MSTPCR0, 14, 0, 0, 0), - MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0, 0, 0), - MSTP("dmac1", &div4_clks[DIV4_B], MSTPCR0, 12, 0, 1, 1), - MSTP("tmu1", &div4_clks[DIV4_P], MSTPCR0, 11, 0, 1, 0), - MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0, 1, 0), - MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 9, 0, 1, 0), - MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 8, 0, 1, 0), - MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 7, 0, 1, 0), - MSTP("scif3", &div4_clks[DIV4_B], MSTPCR0, 6, 0, 1, 0), - MSTP("scif4", &div4_clks[DIV4_B], MSTPCR0, 5, 0, 1, 0), - MSTP("scif5", &div4_clks[DIV4_B], MSTPCR0, 4, 0, 1, 0), - MSTP("msiof0", &div4_clks[DIV4_B], MSTPCR0, 2, 0, 1, 0), - MSTP("msiof1", &div4_clks[DIV4_B], MSTPCR0, 1, 0, 1, 0), - MSTP("meram0", &div4_clks[DIV4_SH], MSTPCR0, 0, 1, 1, 0), - - MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0, 1, 0), - MSTP("rtc0", &r_clk, MSTPCR1, 8, 0, 0, 0), - - MSTP("atapi0", &div4_clks[DIV4_SH], MSTPCR2, 28, 0, 1, 0), - MSTP("adc0", &div4_clks[DIV4_P], MSTPCR2, 27, 0, 1, 0), - MSTP("tpu0", &div4_clks[DIV4_B], MSTPCR2, 25, 0, 1, 0), - MSTP("irda0", &div4_clks[DIV4_P], MSTPCR2, 24, 0, 1, 0), - MSTP("tsif0", &div4_clks[DIV4_B], MSTPCR2, 22, 0, 1, 0), - MSTP("icb0", &div4_clks[DIV4_B], MSTPCR2, 21, 0, 1, 1), - MSTP("sdhi0", &div4_clks[DIV4_B], MSTPCR2, 18, 0, 1, 0), - MSTP("sdhi1", &div4_clks[DIV4_B], MSTPCR2, 17, 0, 1, 0), - MSTP("keysc0", &r_clk, MSTPCR2, 14, 0, 0, 0), - MSTP("usb0", &div4_clks[DIV4_B], MSTPCR2, 11, 0, 1, 0), - MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 10, 0, 1, 1), - MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0, 1, 0), - MSTP("veu1", &div4_clks[DIV4_B], MSTPCR2, 6, 1, 1, 1), - MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0, 1, 1), - MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0, 1, 1), - MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0, 1, 1), - MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, 1, 1, 1), - MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, 1, 1, 1), - MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0, 1, 1), + SH_HWBLK_CLK("tlb0", -1, I_CLK, HWBLK_TLB, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("ic0", -1, I_CLK, HWBLK_IC, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("oc0", -1, I_CLK, HWBLK_OC, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("l2c0", -1, SH_CLK, HWBLK_L2C, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("ilmem0", -1, I_CLK, HWBLK_ILMEM, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("fpu0", -1, I_CLK, HWBLK_FPU, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("intc0", -1, I_CLK, HWBLK_INTC, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("dmac0", -1, B_CLK, HWBLK_DMAC0, 0), + SH_HWBLK_CLK("sh0", -1, SH_CLK, HWBLK_SHYWAY, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("hudi0", -1, P_CLK, HWBLK_HUDI, 0), + SH_HWBLK_CLK("ubc0", -1, I_CLK, HWBLK_UBC, 0), + SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU0, 0), + SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0), + SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0), + SH_HWBLK_CLK("dmac1", -1, B_CLK, HWBLK_DMAC1, 0), + SH_HWBLK_CLK("tmu1", -1, P_CLK, HWBLK_TMU1, 0), + SH_HWBLK_CLK("flctl0", -1, P_CLK, HWBLK_FLCTL, 0), + SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0), + SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0), + SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0), + SH_HWBLK_CLK("scif3", -1, B_CLK, HWBLK_SCIF3, 0), + SH_HWBLK_CLK("scif4", -1, B_CLK, HWBLK_SCIF4, 0), + SH_HWBLK_CLK("scif5", -1, B_CLK, HWBLK_SCIF5, 0), + SH_HWBLK_CLK("msiof0", -1, B_CLK, HWBLK_MSIOF0, 0), + SH_HWBLK_CLK("msiof1", -1, B_CLK, HWBLK_MSIOF1, 0), + SH_HWBLK_CLK("meram0", -1, SH_CLK, HWBLK_MERAM, 0), + + SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC, 0), + SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0), + + SH_HWBLK_CLK("atapi0", -1, SH_CLK, HWBLK_ATAPI, 0), + SH_HWBLK_CLK("adc0", -1, P_CLK, HWBLK_ADC, 0), + SH_HWBLK_CLK("tpu0", -1, B_CLK, HWBLK_TPU, 0), + SH_HWBLK_CLK("irda0", -1, P_CLK, HWBLK_IRDA, 0), + SH_HWBLK_CLK("tsif0", -1, B_CLK, HWBLK_TSIF, 0), + SH_HWBLK_CLK("icb0", -1, B_CLK, HWBLK_ICB, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("sdhi0", -1, B_CLK, HWBLK_SDHI0, 0), + SH_HWBLK_CLK("sdhi1", -1, B_CLK, HWBLK_SDHI1, 0), + SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0), + SH_HWBLK_CLK("usb0", -1, B_CLK, HWBLK_USB, 0), + SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0), + SH_HWBLK_CLK("siu0", -1, B_CLK, HWBLK_SIU, 0), + SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU2H1, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0), + SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU, 0), + SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU, 0), + SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU2H0, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, CLK_ENABLE_ON_INIT), + SH_HWBLK_CLK("lcdc0", -1, B_CLK, HWBLK_LCDC, 0), }; int __init arch_clk_init(void) @@ -216,7 +222,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks)); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks)); + ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks)); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c b/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c new file mode 100644 index 00000000000..a288b5d9234 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c @@ -0,0 +1,106 @@ +/* + * arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c + * + * SH7722 hardware block support + * + * Copyright (C) 2009 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <asm/suspend.h> +#include <asm/hwblk.h> +#include <cpu/sh7722.h> + +/* SH7722 registers */ +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 + +/* SH7722 Power Domains */ +enum { CORE_AREA, SUB_AREA, CORE_AREA_BM }; +static struct hwblk_area sh7722_hwblk_area[] = { + [CORE_AREA] = HWBLK_AREA(0, 0), + [CORE_AREA_BM] = HWBLK_AREA(HWBLK_AREA_FLAG_PARENT, CORE_AREA), + [SUB_AREA] = HWBLK_AREA(0, 0), +}; + +/* Table mapping HWBLK to Module Stop Bit and Power Domain */ +static struct hwblk sh7722_hwblk[HWBLK_NR] = { + [HWBLK_TLB] = HWBLK(MSTPCR0, 31, CORE_AREA), + [HWBLK_IC] = HWBLK(MSTPCR0, 30, CORE_AREA), + [HWBLK_OC] = HWBLK(MSTPCR0, 29, CORE_AREA), + [HWBLK_URAM] = HWBLK(MSTPCR0, 28, CORE_AREA), + [HWBLK_XYMEM] = HWBLK(MSTPCR0, 26, CORE_AREA), + [HWBLK_INTC] = HWBLK(MSTPCR0, 22, CORE_AREA), + [HWBLK_DMAC] = HWBLK(MSTPCR0, 21, CORE_AREA_BM), + [HWBLK_SHYWAY] = HWBLK(MSTPCR0, 20, CORE_AREA), + [HWBLK_HUDI] = HWBLK(MSTPCR0, 19, CORE_AREA), + [HWBLK_UBC] = HWBLK(MSTPCR0, 17, CORE_AREA), + [HWBLK_TMU] = HWBLK(MSTPCR0, 15, CORE_AREA), + [HWBLK_CMT] = HWBLK(MSTPCR0, 14, SUB_AREA), + [HWBLK_RWDT] = HWBLK(MSTPCR0, 13, SUB_AREA), + [HWBLK_FLCTL] = HWBLK(MSTPCR0, 10, CORE_AREA), + [HWBLK_SCIF0] = HWBLK(MSTPCR0, 7, CORE_AREA), + [HWBLK_SCIF1] = HWBLK(MSTPCR0, 6, CORE_AREA), + [HWBLK_SCIF2] = HWBLK(MSTPCR0, 5, CORE_AREA), + [HWBLK_SIO] = HWBLK(MSTPCR0, 3, CORE_AREA), + [HWBLK_SIOF0] = HWBLK(MSTPCR0, 2, CORE_AREA), + [HWBLK_SIOF1] = HWBLK(MSTPCR0, 1, CORE_AREA), + + [HWBLK_IIC] = HWBLK(MSTPCR1, 9, CORE_AREA), + [HWBLK_RTC] = HWBLK(MSTPCR1, 8, SUB_AREA), + + [HWBLK_TPU] = HWBLK(MSTPCR2, 25, CORE_AREA), + [HWBLK_IRDA] = HWBLK(MSTPCR2, 24, CORE_AREA), + [HWBLK_SDHI] = HWBLK(MSTPCR2, 18, CORE_AREA), + [HWBLK_SIM] = HWBLK(MSTPCR2, 16, CORE_AREA), + [HWBLK_KEYSC] = HWBLK(MSTPCR2, 14, SUB_AREA), + [HWBLK_TSIF] = HWBLK(MSTPCR2, 13, SUB_AREA), + [HWBLK_USBF] = HWBLK(MSTPCR2, 11, CORE_AREA), + [HWBLK_2DG] = HWBLK(MSTPCR2, 9, CORE_AREA_BM), + [HWBLK_SIU] = HWBLK(MSTPCR2, 8, CORE_AREA), + [HWBLK_JPU] = HWBLK(MSTPCR2, 6, CORE_AREA_BM), + [HWBLK_VOU] = HWBLK(MSTPCR2, 5, CORE_AREA_BM), + [HWBLK_BEU] = HWBLK(MSTPCR2, 4, CORE_AREA_BM), + [HWBLK_CEU] = HWBLK(MSTPCR2, 3, CORE_AREA_BM), + [HWBLK_VEU] = HWBLK(MSTPCR2, 2, CORE_AREA_BM), + [HWBLK_VPU] = HWBLK(MSTPCR2, 1, CORE_AREA_BM), + [HWBLK_LCDC] = HWBLK(MSTPCR2, 0, CORE_AREA_BM), +}; + +static struct hwblk_info sh7722_hwblk_info = { + .areas = sh7722_hwblk_area, + .nr_areas = ARRAY_SIZE(sh7722_hwblk_area), + .hwblks = sh7722_hwblk, + .nr_hwblks = ARRAY_SIZE(sh7722_hwblk), +}; + +int arch_hwblk_sleep_mode(void) +{ + if (!sh7722_hwblk_area[CORE_AREA].cnt[HWBLK_CNT_USAGE]) + return SUSP_SH_STANDBY | SUSP_SH_SF; + + if (!sh7722_hwblk_area[CORE_AREA_BM].cnt[HWBLK_CNT_USAGE]) + return SUSP_SH_SLEEP | SUSP_SH_SF; + + return SUSP_SH_SLEEP; +} + +int __init arch_hwblk_init(void) +{ + return hwblk_register(&sh7722_hwblk_info); +} diff --git a/arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c b/arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c new file mode 100644 index 00000000000..a7f4684d203 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c @@ -0,0 +1,117 @@ +/* + * arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c + * + * SH7723 hardware block support + * + * Copyright (C) 2009 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <asm/suspend.h> +#include <asm/hwblk.h> +#include <cpu/sh7723.h> + +/* SH7723 registers */ +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 + +/* SH7723 Power Domains */ +enum { CORE_AREA, SUB_AREA, CORE_AREA_BM }; +static struct hwblk_area sh7723_hwblk_area[] = { + [CORE_AREA] = HWBLK_AREA(0, 0), + [CORE_AREA_BM] = HWBLK_AREA(HWBLK_AREA_FLAG_PARENT, CORE_AREA), + [SUB_AREA] = HWBLK_AREA(0, 0), +}; + +/* Table mapping HWBLK to Module Stop Bit and Power Domain */ +static struct hwblk sh7723_hwblk[HWBLK_NR] = { + [HWBLK_TLB] = HWBLK(MSTPCR0, 31, CORE_AREA), + [HWBLK_IC] = HWBLK(MSTPCR0, 30, CORE_AREA), + [HWBLK_OC] = HWBLK(MSTPCR0, 29, CORE_AREA), + [HWBLK_L2C] = HWBLK(MSTPCR0, 28, CORE_AREA), + [HWBLK_ILMEM] = HWBLK(MSTPCR0, 27, CORE_AREA), + [HWBLK_FPU] = HWBLK(MSTPCR0, 24, CORE_AREA), + [HWBLK_INTC] = HWBLK(MSTPCR0, 22, CORE_AREA), + [HWBLK_DMAC0] = HWBLK(MSTPCR0, 21, CORE_AREA_BM), + [HWBLK_SHYWAY] = HWBLK(MSTPCR0, 20, CORE_AREA), + [HWBLK_HUDI] = HWBLK(MSTPCR0, 19, CORE_AREA), + [HWBLK_DBG] = HWBLK(MSTPCR0, 18, CORE_AREA), + [HWBLK_UBC] = HWBLK(MSTPCR0, 17, CORE_AREA), + [HWBLK_SUBC] = HWBLK(MSTPCR0, 16, CORE_AREA), + [HWBLK_TMU0] = HWBLK(MSTPCR0, 15, CORE_AREA), + [HWBLK_CMT] = HWBLK(MSTPCR0, 14, SUB_AREA), + [HWBLK_RWDT] = HWBLK(MSTPCR0, 13, SUB_AREA), + [HWBLK_DMAC1] = HWBLK(MSTPCR0, 12, CORE_AREA_BM), + [HWBLK_TMU1] = HWBLK(MSTPCR0, 11, CORE_AREA), + [HWBLK_FLCTL] = HWBLK(MSTPCR0, 10, CORE_AREA), + [HWBLK_SCIF0] = HWBLK(MSTPCR0, 9, CORE_AREA), + [HWBLK_SCIF1] = HWBLK(MSTPCR0, 8, CORE_AREA), + [HWBLK_SCIF2] = HWBLK(MSTPCR0, 7, CORE_AREA), + [HWBLK_SCIF3] = HWBLK(MSTPCR0, 6, CORE_AREA), + [HWBLK_SCIF4] = HWBLK(MSTPCR0, 5, CORE_AREA), + [HWBLK_SCIF5] = HWBLK(MSTPCR0, 4, CORE_AREA), + [HWBLK_MSIOF0] = HWBLK(MSTPCR0, 2, CORE_AREA), + [HWBLK_MSIOF1] = HWBLK(MSTPCR0, 1, CORE_AREA), + [HWBLK_MERAM] = HWBLK(MSTPCR0, 0, CORE_AREA), + + [HWBLK_IIC] = HWBLK(MSTPCR1, 9, CORE_AREA), + [HWBLK_RTC] = HWBLK(MSTPCR1, 8, SUB_AREA), + + [HWBLK_ATAPI] = HWBLK(MSTPCR2, 28, CORE_AREA_BM), + [HWBLK_ADC] = HWBLK(MSTPCR2, 27, CORE_AREA), + [HWBLK_TPU] = HWBLK(MSTPCR2, 25, CORE_AREA), + [HWBLK_IRDA] = HWBLK(MSTPCR2, 24, CORE_AREA), + [HWBLK_TSIF] = HWBLK(MSTPCR2, 22, CORE_AREA), + [HWBLK_ICB] = HWBLK(MSTPCR2, 21, CORE_AREA_BM), + [HWBLK_SDHI0] = HWBLK(MSTPCR2, 18, CORE_AREA), + [HWBLK_SDHI1] = HWBLK(MSTPCR2, 17, CORE_AREA), + [HWBLK_KEYSC] = HWBLK(MSTPCR2, 14, SUB_AREA), + [HWBLK_USB] = HWBLK(MSTPCR2, 11, CORE_AREA), + [HWBLK_2DG] = HWBLK(MSTPCR2, 10, CORE_AREA_BM), + [HWBLK_SIU] = HWBLK(MSTPCR2, 8, CORE_AREA), + [HWBLK_VEU2H1] = HWBLK(MSTPCR2, 6, CORE_AREA_BM), + [HWBLK_VOU] = HWBLK(MSTPCR2, 5, CORE_AREA_BM), + [HWBLK_BEU] = HWBLK(MSTPCR2, 4, CORE_AREA_BM), + [HWBLK_CEU] = HWBLK(MSTPCR2, 3, CORE_AREA_BM), + [HWBLK_VEU2H0] = HWBLK(MSTPCR2, 2, CORE_AREA_BM), + [HWBLK_VPU] = HWBLK(MSTPCR2, 1, CORE_AREA_BM), + [HWBLK_LCDC] = HWBLK(MSTPCR2, 0, CORE_AREA_BM), +}; + +static struct hwblk_info sh7723_hwblk_info = { + .areas = sh7723_hwblk_area, + .nr_areas = ARRAY_SIZE(sh7723_hwblk_area), + .hwblks = sh7723_hwblk, + .nr_hwblks = ARRAY_SIZE(sh7723_hwblk), +}; + +int arch_hwblk_sleep_mode(void) +{ + if (!sh7723_hwblk_area[CORE_AREA].cnt[HWBLK_CNT_USAGE]) + return SUSP_SH_STANDBY | SUSP_SH_SF; + + if (!sh7723_hwblk_area[CORE_AREA_BM].cnt[HWBLK_CNT_USAGE]) + return SUSP_SH_SLEEP | SUSP_SH_SF; + + return SUSP_SH_SLEEP; +} + +int __init arch_hwblk_init(void) +{ + return hwblk_register(&sh7723_hwblk_info); +} diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 6307e087c86..ac4d5672ec1 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -325,7 +325,7 @@ static int __init sh7343_devices_setup(void) return platform_add_devices(sh7343_devices, ARRAY_SIZE(sh7343_devices)); } -__initcall(sh7343_devices_setup); +arch_initcall(sh7343_devices_setup); static struct platform_device *sh7343_early_devices[] __initdata = { &cmt_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index c18f7d09281..4a9010bf4fd 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -40,7 +40,7 @@ static struct platform_device iic_device = { }; static struct r8a66597_platdata r8a66597_data = { - /* This set zero to all members */ + .on_chip = 1, }; static struct resource usb_host_resources[] = { @@ -318,7 +318,7 @@ static int __init sh7366_devices_setup(void) return platform_add_devices(sh7366_devices, ARRAY_SIZE(sh7366_devices)); } -__initcall(sh7366_devices_setup); +arch_initcall(sh7366_devices_setup); static struct platform_device *sh7366_early_devices[] __initdata = { &cmt_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index ea524a2da3e..67b0d87fcb2 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -13,6 +13,7 @@ #include <linux/serial_sci.h> #include <linux/mm.h> #include <linux/uio_driver.h> +#include <linux/usb/m66592.h> #include <linux/sh_timer.h> #include <asm/clock.h> #include <asm/mmzone.h> @@ -47,9 +48,13 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; +static struct m66592_platdata usbf_platdata = { + .on_chip = 1, +}; + static struct resource usbf_resources[] = { [0] = { - .name = "m66592_udc", + .name = "USBF", .start = 0x04480000, .end = 0x044800FF, .flags = IORESOURCE_MEM, @@ -67,6 +72,7 @@ static struct platform_device usbf_device = { .dev = { .dma_mask = NULL, .coherent_dma_mask = 0xffffffff, + .platform_data = &usbf_platdata, }, .num_resources = ARRAY_SIZE(usbf_resources), .resource = usbf_resources, @@ -359,7 +365,7 @@ static int __init sh7722_devices_setup(void) return platform_add_devices(sh7722_devices, ARRAY_SIZE(sh7722_devices)); } -__initcall(sh7722_devices_setup); +arch_initcall(sh7722_devices_setup); static struct platform_device *sh7722_early_devices[] __initdata = { &cmt_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index e1bb80b2a27..26dc4d32325 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -398,7 +398,7 @@ static struct platform_device rtc_device = { }; static struct r8a66597_platdata r8a66597_data = { - /* This set zero to all members */ + .on_chip = 1, }; static struct resource sh7723_usb_host_resources[] = { @@ -473,7 +473,7 @@ static int __init sh7723_devices_setup(void) return platform_add_devices(sh7723_devices, ARRAY_SIZE(sh7723_devices)); } -__initcall(sh7723_devices_setup); +arch_initcall(sh7723_devices_setup); static struct platform_device *sh7723_early_devices[] __initdata = { &cmt_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index e5ac9eb11c6..a04edaab9a2 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -508,7 +508,7 @@ static int __init sh7724_devices_setup(void) return platform_add_devices(sh7724_devices, ARRAY_SIZE(sh7724_devices)); } -device_initcall(sh7724_devices_setup); +arch_initcall(sh7724_devices_setup); static struct platform_device *sh7724_early_devices[] __initdata = { &cmt_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index f1e0c0d36da..4659fff6b84 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -314,7 +314,7 @@ static int __init sh7763_devices_setup(void) return platform_add_devices(sh7763_devices, ARRAY_SIZE(sh7763_devices)); } -__initcall(sh7763_devices_setup); +arch_initcall(sh7763_devices_setup); static struct platform_device *sh7763_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index 1e86209db28..eead08d89d3 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -368,7 +368,7 @@ static int __init sh7770_devices_setup(void) return platform_add_devices(sh7770_devices, ARRAY_SIZE(sh7770_devices)); } -__initcall(sh7770_devices_setup); +arch_initcall(sh7770_devices_setup); static struct platform_device *sh7770_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 715e05b431e..2c901f44695 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -256,7 +256,7 @@ static int __init sh7780_devices_setup(void) return platform_add_devices(sh7780_devices, ARRAY_SIZE(sh7780_devices)); } -__initcall(sh7780_devices_setup); +arch_initcall(sh7780_devices_setup); static struct platform_device *sh7780_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index af561402570..7f6c718b6c3 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -263,7 +263,7 @@ static int __init sh7785_devices_setup(void) return platform_add_devices(sh7785_devices, ARRAY_SIZE(sh7785_devices)); } -__initcall(sh7785_devices_setup); +arch_initcall(sh7785_devices_setup); static struct platform_device *sh7785_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index b70049470a0..0104a8ec536 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -547,7 +547,7 @@ static int __init sh7786_devices_setup(void) return platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices)); } -device_initcall(sh7786_devices_setup); +arch_initcall(sh7786_devices_setup); void __init plat_early_device_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index 53c65fd9cce..07f078961c7 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -256,7 +256,7 @@ static int __init shx3_devices_setup(void) return platform_add_devices(shx3_devices, ARRAY_SIZE(shx3_devices)); } -__initcall(shx3_devices_setup); +arch_initcall(shx3_devices_setup); void __init plat_early_device_setup(void) { diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c index f5ff1ac57fc..6a0f82f7003 100644 --- a/arch/sh/kernel/cpu/sh5/setup-sh5.c +++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c @@ -186,7 +186,7 @@ static int __init sh5_devices_setup(void) return platform_add_devices(sh5_devices, ARRAY_SIZE(sh5_devices)); } -__initcall(sh5_devices_setup); +arch_initcall(sh5_devices_setup); void __init plat_early_device_setup(void) { diff --git a/arch/sh/kernel/cpu/shmobile/Makefile b/arch/sh/kernel/cpu/shmobile/Makefile index 08bfa7c7db2..e8a5111e848 100644 --- a/arch/sh/kernel/cpu/shmobile/Makefile +++ b/arch/sh/kernel/cpu/shmobile/Makefile @@ -4,3 +4,4 @@ # Power Management & Sleep mode obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c new file mode 100644 index 00000000000..4afdd975cc6 --- /dev/null +++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c @@ -0,0 +1,102 @@ +/* + * arch/sh/kernel/cpu/shmobile/cpuidle.c + * + * Cpuidle support code for SuperH Mobile + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/suspend.h> +#include <linux/cpuidle.h> +#include <asm/suspend.h> +#include <asm/uaccess.h> +#include <asm/hwblk.h> + +static unsigned long cpuidle_mode[] = { + SUSP_SH_SLEEP, /* regular sleep mode */ + SUSP_SH_SLEEP | SUSP_SH_SF, /* sleep mode + self refresh */ +}; + +static int cpuidle_sleep_enter(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + unsigned long allowed_mode = arch_hwblk_sleep_mode(); + ktime_t before, after; + int requested_state = state - &dev->states[0]; + int allowed_state; + int k; + + /* convert allowed mode to allowed state */ + for (k = ARRAY_SIZE(cpuidle_mode) - 1; k > 0; k--) + if (cpuidle_mode[k] == allowed_mode) + break; + + allowed_state = k; + + /* take the following into account for sleep mode selection: + * - allowed_state: best mode allowed by hardware (clock deps) + * - requested_state: best mode allowed by software (latencies) + */ + k = min_t(int, allowed_state, requested_state); + + dev->last_state = &dev->states[k]; + before = ktime_get(); + sh_mobile_call_standby(cpuidle_mode[k]); + after = ktime_get(); + return ktime_to_ns(ktime_sub(after, before)) >> 10; +} + +static struct cpuidle_device cpuidle_dev; +static struct cpuidle_driver cpuidle_driver = { + .name = "sh_idle", + .owner = THIS_MODULE, +}; + +void sh_mobile_setup_cpuidle(void) +{ + struct cpuidle_device *dev = &cpuidle_dev; + struct cpuidle_state *state; + int i; + + cpuidle_register_driver(&cpuidle_driver); + + for (i = 0; i < CPUIDLE_STATE_MAX; i++) { + dev->states[i].name[0] = '\0'; + dev->states[i].desc[0] = '\0'; + } + + i = CPUIDLE_DRIVER_STATE_START; + + state = &dev->states[i++]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C0"); + strncpy(state->desc, "SuperH Sleep Mode", CPUIDLE_DESC_LEN); + state->exit_latency = 1; + state->target_residency = 1 * 2; + state->power_usage = 3; + state->flags = 0; + state->flags |= CPUIDLE_FLAG_SHALLOW; + state->flags |= CPUIDLE_FLAG_TIME_VALID; + state->enter = cpuidle_sleep_enter; + + dev->safe_state = state; + + state = &dev->states[i++]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C1"); + strncpy(state->desc, "SuperH Sleep Mode [SF]", CPUIDLE_DESC_LEN); + state->exit_latency = 100; + state->target_residency = 1 * 2; + state->power_usage = 1; + state->flags = 0; + state->flags |= CPUIDLE_FLAG_TIME_VALID; + state->enter = cpuidle_sleep_enter; + + dev->state_count = i; + + cpuidle_register_device(dev); +} diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c index 8c067adf683..de078d24ce5 100644 --- a/arch/sh/kernel/cpu/shmobile/pm.c +++ b/arch/sh/kernel/cpu/shmobile/pm.c @@ -1,5 +1,5 @@ /* - * arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c + * arch/sh/kernel/cpu/shmobile/pm.c * * Power management support code for SuperH Mobile * @@ -32,20 +32,17 @@ * * R-standby mode is unsupported, but will be added in the future * U-standby mode is low priority since it needs bootloader hacks - * - * All modes should be tied in with cpuidle. But before that can - * happen we need to keep track of enabled hardware blocks so we - * can avoid entering sleep modes that stop clocks to hardware - * blocks that are in use even though the cpu core is idle. */ +#define ILRAM_BASE 0xe5200000 + extern const unsigned char sh_mobile_standby[]; extern const unsigned int sh_mobile_standby_size; -static void sh_mobile_call_standby(unsigned long mode) +void sh_mobile_call_standby(unsigned long mode) { extern void *vbr_base; - void *onchip_mem = (void *)0xe5200000; /* ILRAM */ + void *onchip_mem = (void *)ILRAM_BASE; void (*standby_onchip_mem)(unsigned long) = onchip_mem; /* Note: Wake up from sleep may generate exceptions! @@ -55,11 +52,6 @@ static void sh_mobile_call_standby(unsigned long mode) if (mode & SUSP_SH_SF) asm volatile("ldc %0, vbr" : : "r" (onchip_mem) : "memory"); - /* Copy the assembly snippet to the otherwise ununsed ILRAM */ - memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size); - wmb(); - ctrl_barrier(); - /* Let assembly snippet in on-chip memory handle the rest */ standby_onchip_mem(mode); @@ -85,7 +77,15 @@ static struct platform_suspend_ops sh_pm_ops = { static int __init sh_pm_init(void) { + void *onchip_mem = (void *)ILRAM_BASE; + + /* Copy the assembly snippet to the otherwise ununsed ILRAM */ + memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size); + wmb(); + ctrl_barrier(); + suspend_set_ops(&sh_pm_ops); + sh_mobile_setup_cpuidle(); return 0; } diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index d62359cfbbe..d62175650c5 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -131,7 +131,7 @@ ENTRY(resume_userspace) nop #endif mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_WORK_MASK, r0 + tst #(_TIF_WORK_MASK & 0xff), r0 bt/s __restore_all tst #_TIF_NEED_RESCHED, r0 @@ -163,7 +163,7 @@ work_resched: #endif ! mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_WORK_MASK, r0 + tst #(_TIF_WORK_MASK & 0xff), r0 bt __restore_all bra work_pending tst #_TIF_NEED_RESCHED, r0 @@ -181,7 +181,7 @@ work_resched: syscall_exit_work: ! r0: current_thread_info->flags ! r8: current_thread_info - tst #_TIF_WORK_SYSCALL_MASK, r0 + tst #(_TIF_WORK_SYSCALL_MASK & 0xff), r0 bt/s work_pending tst #_TIF_NEED_RESCHED, r0 #ifdef CONFIG_TRACE_IRQFLAGS @@ -331,8 +331,12 @@ ENTRY(system_call) ! get_current_thread_info r8, r10 mov.l @(TI_FLAGS,r8), r8 - mov #_TIF_WORK_SYSCALL_MASK, r10 + mov #(_TIF_WORK_SYSCALL_MASK & 0xff), r10 + mov #(_TIF_WORK_SYSCALL_MASK >> 8), r9 tst r10, r8 + shll8 r9 + bf syscall_trace_entry + tst r9, r8 bf syscall_trace_entry ! mov.l 2f, r8 ! Number of syscalls @@ -359,7 +363,11 @@ syscall_exit: ! get_current_thread_info r8, r0 mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_ALLWORK_MASK, r0 + tst #(_TIF_ALLWORK_MASK & 0xff), r0 + mov #(_TIF_ALLWORK_MASK >> 8), r1 + bf syscall_exit_work + shlr8 r0 + tst r0, r1 bf syscall_exit_work bra __restore_all nop diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c index 066f37dc32a..6647dfcb781 100644 --- a/arch/sh/kernel/ftrace.c +++ b/arch/sh/kernel/ftrace.c @@ -16,9 +16,13 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/kernel.h> #include <asm/ftrace.h> #include <asm/cacheflush.h> +#include <asm/unistd.h> +#include <trace/syscall.h> +#ifdef CONFIG_DYNAMIC_FTRACE static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE]; static unsigned char ftrace_nop[4]; @@ -131,3 +135,189 @@ int __init ftrace_dyn_arch_init(void *data) return 0; } +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#ifdef CONFIG_DYNAMIC_FTRACE +extern void ftrace_graph_call(void); + +static int ftrace_mod(unsigned long ip, unsigned long old_addr, + unsigned long new_addr) +{ + unsigned char code[MCOUNT_INSN_SIZE]; + + if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE)) + return -EFAULT; + + if (old_addr != __raw_readl((unsigned long *)code)) + return -EINVAL; + + __raw_writel(new_addr, ip); + return 0; +} + +int ftrace_enable_ftrace_graph_caller(void) +{ + unsigned long ip, old_addr, new_addr; + + ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET; + old_addr = (unsigned long)(&skip_trace); + new_addr = (unsigned long)(&ftrace_graph_caller); + + return ftrace_mod(ip, old_addr, new_addr); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + unsigned long ip, old_addr, new_addr; + + ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET; + old_addr = (unsigned long)(&ftrace_graph_caller); + new_addr = (unsigned long)(&skip_trace); + + return ftrace_mod(ip, old_addr, new_addr); +} +#endif /* CONFIG_DYNAMIC_FTRACE */ + +/* + * Hook the return address and push it in the stack of return addrs + * in the current thread info. + * + * This is the main routine for the function graph tracer. The function + * graph tracer essentially works like this: + * + * parent is the stack address containing self_addr's return address. + * We pull the real return address out of parent and store it in + * current's ret_stack. Then, we replace the return address on the stack + * with the address of return_to_handler. self_addr is the function that + * called mcount. + * + * When self_addr returns, it will jump to return_to_handler which calls + * ftrace_return_to_handler. ftrace_return_to_handler will pull the real + * return address off of current's ret_stack and jump to it. + */ +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) +{ + unsigned long old; + int faulted, err; + struct ftrace_graph_ent trace; + unsigned long return_hooker = (unsigned long)&return_to_handler; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + /* + * Protect against fault, even if it shouldn't + * happen. This tool is too much intrusive to + * ignore such a protection. + */ + __asm__ __volatile__( + "1: \n\t" + "mov.l @%2, %0 \n\t" + "2: \n\t" + "mov.l %3, @%2 \n\t" + "mov #0, %1 \n\t" + "3: \n\t" + ".section .fixup, \"ax\" \n\t" + "4: \n\t" + "mov.l 5f, %0 \n\t" + "jmp @%0 \n\t" + " mov #1, %1 \n\t" + ".balign 4 \n\t" + "5: .long 3b \n\t" + ".previous \n\t" + ".section __ex_table,\"a\" \n\t" + ".long 1b, 4b \n\t" + ".long 2b, 4b \n\t" + ".previous \n\t" + : "=&r" (old), "=r" (faulted) + : "r" (parent), "r" (return_hooker) + ); + + if (unlikely(faulted)) { + ftrace_graph_stop(); + WARN_ON(1); + return; + } + + err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0); + if (err == -EBUSY) { + __raw_writel(old, parent); + return; + } + + trace.func = self_addr; + + /* Only trace if the calling function expects to */ + if (!ftrace_graph_entry(&trace)) { + current->curr_ret_stack--; + __raw_writel(old, parent); + } +} +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + +#ifdef CONFIG_FTRACE_SYSCALLS + +extern unsigned long __start_syscalls_metadata[]; +extern unsigned long __stop_syscalls_metadata[]; +extern unsigned long *sys_call_table; + +static struct syscall_metadata **syscalls_metadata; + +static struct syscall_metadata *find_syscall_meta(unsigned long *syscall) +{ + struct syscall_metadata *start; + struct syscall_metadata *stop; + char str[KSYM_SYMBOL_LEN]; + + + start = (struct syscall_metadata *)__start_syscalls_metadata; + stop = (struct syscall_metadata *)__stop_syscalls_metadata; + kallsyms_lookup((unsigned long) syscall, NULL, NULL, NULL, str); + + for ( ; start < stop; start++) { + if (start->name && !strcmp(start->name, str)) + return start; + } + + return NULL; +} + +#define FTRACE_SYSCALL_MAX (NR_syscalls - 1) + +struct syscall_metadata *syscall_nr_to_meta(int nr) +{ + if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0) + return NULL; + + return syscalls_metadata[nr]; +} + +void arch_init_ftrace_syscalls(void) +{ + int i; + struct syscall_metadata *meta; + unsigned long **psys_syscall_table = &sys_call_table; + static atomic_t refs; + + if (atomic_inc_return(&refs) != 1) + goto end; + + syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * + FTRACE_SYSCALL_MAX, GFP_KERNEL); + if (!syscalls_metadata) { + WARN_ON(1); + return; + } + + for (i = 0; i < FTRACE_SYSCALL_MAX; i++) { + meta = find_syscall_meta(psys_syscall_table[i]); + syscalls_metadata[i] = meta; + } + return; + + /* Paranoid: avoid overflow */ +end: + atomic_dec(&refs); +} +#endif /* CONFIG_FTRACE_SYSCALLS */ diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 3d09062f468..278c68c6048 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -114,23 +114,6 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs) #endif irq_enter(); - -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 1KB free? */ - { - long sp; - - __asm__ __volatile__ ("and r15, %0" : - "=r" (sp) : "0" (THREAD_SIZE - 1)); - - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } - } -#endif - irq = irq_demux(intc_evt2irq(irq)); #ifdef CONFIG_IRQSTACKS diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 92d7740faab..9fee977f176 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -23,6 +23,7 @@ #include <linux/tick.h> #include <linux/reboot.h> #include <linux/fs.h> +#include <linux/ftrace.h> #include <linux/preempt.h> #include <asm/uaccess.h> #include <asm/mmu_context.h> @@ -264,8 +265,8 @@ static void ubc_set_tracing(int asid, unsigned long pc) * switch_to(x,y) should switch tasks from x to y. * */ -struct task_struct *__switch_to(struct task_struct *prev, - struct task_struct *next) +__notrace_funcgraph struct task_struct * +__switch_to(struct task_struct *prev, struct task_struct *next) { #if defined(CONFIG_SH_FPU) unlazy_fpu(prev, task_pt_regs(prev)); diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index 3392e835a37..c198eceaee9 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -34,6 +34,8 @@ #include <asm/syscalls.h> #include <asm/fpu.h> +#include <trace/syscall.h> + /* * This routine will get a word off of the process kernel stack. */ @@ -459,6 +461,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) */ ret = -1L; + if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE))) + ftrace_syscall_enter(regs); + if (unlikely(current->audit_context)) audit_syscall_entry(audit_arch(), regs->regs[3], regs->regs[4], regs->regs[5], @@ -475,6 +480,9 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), regs->regs[0]); + if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE))) + ftrace_syscall_exit(regs); + step = test_thread_flag(TIF_SINGLESTEP); if (step || test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, step); diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index dd38338553e..ceb409bf774 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -30,6 +30,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/lmb.h> #include <asm/uaccess.h> #include <asm/io.h> #include <asm/page.h> @@ -233,39 +234,45 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn, void __init setup_bootmem_allocator(unsigned long free_pfn) { unsigned long bootmap_size; + unsigned long bootmap_pages, bootmem_paddr; + u64 total_pages = (lmb_end_of_DRAM() - __MEMORY_START) >> PAGE_SHIFT; + int i; + + bootmap_pages = bootmem_bootmap_pages(total_pages); + + bootmem_paddr = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE); /* * Find a proper area for the bootmem bitmap. After this * bootstrap step all allocations (until the page allocator * is intact) must be done via bootmem_alloc(). */ - bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn, + bootmap_size = init_bootmem_node(NODE_DATA(0), + bootmem_paddr >> PAGE_SHIFT, min_low_pfn, max_low_pfn); - __add_active_range(0, min_low_pfn, max_low_pfn); - register_bootmem_low_pages(); - - node_set_online(0); + /* Add active regions with valid PFNs. */ + for (i = 0; i < lmb.memory.cnt; i++) { + unsigned long start_pfn, end_pfn; + start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT; + end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i); + __add_active_range(0, start_pfn, end_pfn); + } /* - * Reserve the kernel text and - * Reserve the bootmem bitmap. We do this in two steps (first step - * was init_bootmem()), because this catches the (definitely buggy) - * case of us accidentally initializing the bootmem allocator with - * an invalid RAM area. + * Add all physical memory to the bootmem map and mark each + * area as present. */ - reserve_bootmem(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET, - (PFN_PHYS(free_pfn) + bootmap_size + PAGE_SIZE - 1) - - (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET), - BOOTMEM_DEFAULT); + register_bootmem_low_pages(); - /* - * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET. - */ - if (CONFIG_ZERO_PAGE_OFFSET != 0) - reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET, + /* Reserve the sections we're already using. */ + for (i = 0; i < lmb.reserved.cnt; i++) + reserve_bootmem(lmb.reserved.region[i].base, + lmb_size_bytes(&lmb.reserved, i), BOOTMEM_DEFAULT); + node_set_online(0); + sparse_memory_present_with_active_regions(0); #ifdef CONFIG_BLK_DEV_INITRD @@ -296,12 +303,37 @@ void __init setup_bootmem_allocator(unsigned long free_pfn) static void __init setup_memory(void) { unsigned long start_pfn; + u64 base = min_low_pfn << PAGE_SHIFT; + u64 size = (max_low_pfn << PAGE_SHIFT) - base; /* * Partially used pages are not usable - thus * we are rounding upwards: */ start_pfn = PFN_UP(__pa(_end)); + + lmb_add(base, size); + + /* + * Reserve the kernel text and + * Reserve the bootmem bitmap. We do this in two steps (first step + * was init_bootmem()), because this catches the (definitely buggy) + * case of us accidentally initializing the bootmem allocator with + * an invalid RAM area. + */ + lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET, + (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) - + (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET)); + + /* + * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET. + */ + if (CONFIG_ZERO_PAGE_OFFSET != 0) + lmb_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET); + + lmb_analyze(); + lmb_dump_all(); + setup_bootmem_allocator(start_pfn); } #else @@ -402,6 +434,7 @@ void __init setup_arch(char **cmdline_p) nodes_clear(node_online_map); /* Setup bootmem with available RAM */ + lmb_init(); setup_memory(); sparse_init(); diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index fcc5de31f83..cec610888e2 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -106,8 +106,8 @@ EXPORT_SYMBOL(flush_dcache_page); EXPORT_SYMBOL(clear_user_page); #endif -#ifdef CONFIG_FUNCTION_TRACER -EXPORT_SYMBOL(mcount); +#ifdef CONFIG_MCOUNT +DECLARE_EXPORT(mcount); #endif EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 9b352a1e3fb..d2424b068b7 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -21,6 +21,7 @@ #include <linux/smp.h> #include <linux/rtc.h> #include <asm/clock.h> +#include <asm/hwblk.h> #include <asm/rtc.h> /* Dummy RTC ops */ @@ -96,6 +97,7 @@ void __init time_init(void) if (board_time_init) board_time_init(); + hwblk_init(); clk_init(); rtc_sh_get_time(&xtime); diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index f53c76acaed..80dc9f8d941 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -50,12 +50,7 @@ SECTIONS _etext = .; /* End of text section */ } = 0x0009 - . = ALIGN(16); /* Exception table */ - __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } + EXCEPTION_TABLE(16) NOTES RO_DATA(PAGE_SIZE) @@ -71,69 +66,14 @@ SECTIONS __uncached_end = .; } - . = ALIGN(THREAD_SIZE); - .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ - *(.data.init_task) - - . = ALIGN(L1_CACHE_BYTES); - *(.data.cacheline_aligned) - - . = ALIGN(L1_CACHE_BYTES); - *(.data.read_mostly) - - . = ALIGN(PAGE_SIZE); - *(.data.page_aligned) - - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - - DATA_DATA - CONSTRUCTORS - } + RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) _edata = .; /* End of data section */ . = ALIGN(PAGE_SIZE); /* Init code and data */ - .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { - __init_begin = .; - _sinittext = .; - INIT_TEXT - _einittext = .; - } - - .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA } - - . = ALIGN(16); - .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - - .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { - __initcall_start = .; - INITCALLS - __initcall_end = .; - } - - .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - - SECURITY_INIT - -#ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(PAGE_SIZE); - .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } -#endif + __init_begin = .; + INIT_TEXT_SECTION(PAGE_SIZE) + INIT_DATA_SECTION(16) . = ALIGN(4); .machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) { @@ -152,16 +92,10 @@ SECTIONS .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA } . = ALIGN(PAGE_SIZE); - .bss : AT(ADDR(.bss) - LOAD_OFFSET) { - __init_end = .; - __bss_start = .; /* BSS */ - *(.bss.page_aligned) - *(.bss) - *(COMMON) - . = ALIGN(4); - _ebss = .; /* uClinux MTD sucks */ - _end = . ; - } + __init_end = .; + BSS_SECTION(0, PAGE_SIZE, 4) + _ebss = .; /* uClinux MTD sucks */ + _end = . ; /* * When something in the kernel is NOT compiled as a module, the @@ -170,7 +104,7 @@ SECTIONS * it's a module. */ /DISCARD/ : { - *(.exitcall.exit) + EXIT_CALL } STABS_DEBUG diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index aaea580b65b..c2b28d8b2dd 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -24,7 +24,7 @@ memcpy-y := memcpy.o memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o lib-$(CONFIG_MMU) += copy_page.o clear_page.o -lib-$(CONFIG_FUNCTION_TRACER) += mcount.o +lib-$(CONFIG_MCOUNT) += mcount.o lib-y += $(memcpy-y) $(udivsi3-y) EXTRA_CFLAGS += -Werror diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S index 110fbfe1831..84a57761f17 100644 --- a/arch/sh/lib/mcount.S +++ b/arch/sh/lib/mcount.S @@ -1,14 +1,16 @@ /* * arch/sh/lib/mcount.S * - * Copyright (C) 2008 Paul Mundt - * Copyright (C) 2008 Matt Fleming + * Copyright (C) 2008, 2009 Paul Mundt + * Copyright (C) 2008, 2009 Matt Fleming * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include <asm/ftrace.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> #define MCOUNT_ENTER() \ mov.l r4, @-r15; \ @@ -28,6 +30,55 @@ rts; \ mov.l @r15+, r4 +#ifdef CONFIG_STACK_DEBUG +/* + * Perform diagnostic checks on the state of the kernel stack. + * + * Check for stack overflow. If there is less than 1KB free + * then it has overflowed. + * + * Make sure the stack pointer contains a valid address. Valid + * addresses for kernel stacks are anywhere after the bss + * (after _ebss) and anywhere in init_thread_union (init_stack). + */ +#define STACK_CHECK() \ + mov #(THREAD_SIZE >> 10), r0; \ + shll8 r0; \ + shll2 r0; \ + \ + /* r1 = sp & (THREAD_SIZE - 1) */ \ + mov #-1, r1; \ + add r0, r1; \ + and r15, r1; \ + \ + mov #TI_SIZE, r3; \ + mov #(STACK_WARN >> 8), r2; \ + shll8 r2; \ + add r3, r2; \ + \ + /* Is the stack overflowing? */ \ + cmp/hi r2, r1; \ + bf stack_panic; \ + \ + /* If sp > _ebss then we're OK. */ \ + mov.l .L_ebss, r1; \ + cmp/hi r1, r15; \ + bt 1f; \ + \ + /* If sp < init_stack, we're not OK. */ \ + mov.l .L_init_thread_union, r1; \ + cmp/hs r1, r15; \ + bf stack_panic; \ + \ + /* If sp > init_stack && sp < _ebss, not OK. */ \ + add r0, r1; \ + cmp/hs r1, r15; \ + bt stack_panic; \ +1: +#else +#define STACK_CHECK() +#endif /* CONFIG_STACK_DEBUG */ + .align 2 .globl _mcount .type _mcount,@function @@ -35,6 +86,19 @@ .type mcount,@function _mcount: mcount: + STACK_CHECK() + +#ifndef CONFIG_FUNCTION_TRACER + rts + nop +#else +#ifndef CONFIG_DYNAMIC_FTRACE + mov.l .Lfunction_trace_stop, r0 + mov.l @r0, r0 + tst r0, r0 + bf ftrace_stub +#endif + MCOUNT_ENTER() #ifdef CONFIG_DYNAMIC_FTRACE @@ -52,16 +116,69 @@ mcount_call: jsr @r6 nop +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + mov.l .Lftrace_graph_return, r6 + mov.l .Lftrace_stub, r7 + cmp/eq r6, r7 + bt 1f + + mov.l .Lftrace_graph_caller, r0 + jmp @r0 + nop + +1: + mov.l .Lftrace_graph_entry, r6 + mov.l .Lftrace_graph_entry_stub, r7 + cmp/eq r6, r7 + bt skip_trace + + mov.l .Lftrace_graph_caller, r0 + jmp @r0 + nop + + .align 2 +.Lftrace_graph_return: + .long ftrace_graph_return +.Lftrace_graph_entry: + .long ftrace_graph_entry +.Lftrace_graph_entry_stub: + .long ftrace_graph_entry_stub +.Lftrace_graph_caller: + .long ftrace_graph_caller +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + + .globl skip_trace skip_trace: MCOUNT_LEAVE() .align 2 .Lftrace_trace_function: - .long ftrace_trace_function + .long ftrace_trace_function #ifdef CONFIG_DYNAMIC_FTRACE +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +/* + * NOTE: Do not move either ftrace_graph_call or ftrace_caller + * as this will affect the calculation of GRAPH_INSN_OFFSET. + */ + .globl ftrace_graph_call +ftrace_graph_call: + mov.l .Lskip_trace, r0 + jmp @r0 + nop + + .align 2 +.Lskip_trace: + .long skip_trace +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + .globl ftrace_caller ftrace_caller: + mov.l .Lfunction_trace_stop, r0 + mov.l @r0, r0 + tst r0, r0 + bf ftrace_stub + MCOUNT_ENTER() .globl ftrace_call @@ -70,9 +187,18 @@ ftrace_call: jsr @r6 nop +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + bra ftrace_graph_call + nop +#else MCOUNT_LEAVE() +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ #endif /* CONFIG_DYNAMIC_FTRACE */ + .align 2 +.Lfunction_trace_stop: + .long function_trace_stop + /* * NOTE: From here on the locations of the .Lftrace_stub label and * ftrace_stub itself are fixed. Adding additional data here will skew @@ -80,7 +206,6 @@ ftrace_call: * Place new labels either after the ftrace_stub body, or before * ftrace_caller. You have been warned. */ - .align 2 .Lftrace_stub: .long ftrace_stub @@ -88,3 +213,98 @@ ftrace_call: ftrace_stub: rts nop + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl ftrace_graph_caller +ftrace_graph_caller: + mov.l 2f, r0 + mov.l @r0, r0 + tst r0, r0 + bt 1f + + mov.l 3f, r1 + jmp @r1 + nop +1: + /* + * MCOUNT_ENTER() pushed 5 registers onto the stack, so + * the stack address containing our return address is + * r15 + 20. + */ + mov #20, r0 + add r15, r0 + mov r0, r4 + + mov.l .Lprepare_ftrace_return, r0 + jsr @r0 + nop + + MCOUNT_LEAVE() + + .align 2 +2: .long function_trace_stop +3: .long skip_trace +.Lprepare_ftrace_return: + .long prepare_ftrace_return + + .globl return_to_handler +return_to_handler: + /* + * Save the return values. + */ + mov.l r0, @-r15 + mov.l r1, @-r15 + + mov #0, r4 + + mov.l .Lftrace_return_to_handler, r0 + jsr @r0 + nop + + /* + * The return value from ftrace_return_handler has the real + * address that we should return to. + */ + lds r0, pr + mov.l @r15+, r1 + rts + mov.l @r15+, r0 + + + .align 2 +.Lftrace_return_to_handler: + .long ftrace_return_to_handler +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ +#endif /* CONFIG_FUNCTION_TRACER */ + +#ifdef CONFIG_STACK_DEBUG + .globl stack_panic +stack_panic: + mov.l .Ldump_stack, r0 + jsr @r0 + nop + + mov.l .Lpanic, r0 + jsr @r0 + mov.l .Lpanic_s, r4 + + rts + nop + + .align 2 +.L_ebss: + .long _ebss +.L_init_thread_union: + .long init_thread_union +.Lpanic: + .long panic +.Lpanic_s: + .long .Lpanic_str +.Ldump_stack: + .long dump_stack + + .section .rodata + .align 2 +.Lpanic_str: + .string "Stack error" +#endif /* CONFIG_STACK_DEBUG */ diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index 71925946f1e..dbbdeba2cee 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -2,7 +2,7 @@ * Page fault handler for SH with an MMU. * * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 - 2008 Paul Mundt + * Copyright (C) 2003 - 2009 Paul Mundt * * Based on linux/arch/i386/mm/fault.c: * Copyright (C) 1995 Linus Torvalds @@ -25,18 +25,91 @@ static inline int notify_page_fault(struct pt_regs *regs, int trap) { int ret = 0; -#ifdef CONFIG_KPROBES - if (!user_mode(regs)) { + if (kprobes_built_in() && !user_mode(regs)) { preempt_disable(); if (kprobe_running() && kprobe_fault_handler(regs, trap)) ret = 1; preempt_enable(); } -#endif return ret; } +static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address) +{ + unsigned index = pgd_index(address); + pgd_t *pgd_k; + pud_t *pud, *pud_k; + pmd_t *pmd, *pmd_k; + + pgd += index; + pgd_k = init_mm.pgd + index; + + if (!pgd_present(*pgd_k)) + return NULL; + + pud = pud_offset(pgd, address); + pud_k = pud_offset(pgd_k, address); + if (!pud_present(*pud_k)) + return NULL; + + pmd = pmd_offset(pud, address); + pmd_k = pmd_offset(pud_k, address); + if (!pmd_present(*pmd_k)) + return NULL; + + if (!pmd_present(*pmd)) + set_pmd(pmd, *pmd_k); + else { + /* + * The page tables are fully synchronised so there must + * be another reason for the fault. Return NULL here to + * signal that we have not taken care of the fault. + */ + BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k)); + return NULL; + } + + return pmd_k; +} + +/* + * Handle a fault on the vmalloc or module mapping area + */ +static noinline int vmalloc_fault(unsigned long address) +{ + pgd_t *pgd_k; + pmd_t *pmd_k; + pte_t *pte_k; + + /* Make sure we are in vmalloc area: */ + if (!(address >= VMALLOC_START && address < VMALLOC_END)) + return -1; + + /* + * Synchronize this task's top level page-table + * with the 'reference' page table. + * + * Do _not_ use "current" here. We might be inside + * an interrupt in the middle of a task switch.. + */ + pgd_k = get_TTB(); + pmd_k = vmalloc_sync_one(pgd_k, address); + if (!pmd_k) + return -1; + + pte_k = pte_offset_kernel(pmd_k, address); + if (!pte_present(*pte_k)) + return -1; + + return 0; +} + +static int fault_in_kernel_space(unsigned long address) +{ + return address >= TASK_SIZE; +} + /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -46,6 +119,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writeaccess, unsigned long address) { + unsigned long vec; struct task_struct *tsk; struct mm_struct *mm; struct vm_area_struct * vma; @@ -53,59 +127,30 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, int fault; siginfo_t info; - /* - * We don't bother with any notifier callbacks here, as they are - * all handled through the __do_page_fault() fast-path. - */ - tsk = current; + mm = tsk->mm; si_code = SEGV_MAPERR; + vec = lookup_exception_vector(); - if (unlikely(address >= TASK_SIZE)) { - /* - * Synchronize this task's top level page-table - * with the 'reference' page table. - * - * Do _not_ use "tsk" here. We might be inside - * an interrupt in the middle of a task switch.. - */ - int offset = pgd_index(address); - pgd_t *pgd, *pgd_k; - pud_t *pud, *pud_k; - pmd_t *pmd, *pmd_k; - - pgd = get_TTB() + offset; - pgd_k = swapper_pg_dir + offset; - - if (!pgd_present(*pgd)) { - if (!pgd_present(*pgd_k)) - goto bad_area_nosemaphore; - set_pgd(pgd, *pgd_k); + /* + * We fault-in kernel-space virtual memory on-demand. The + * 'reference' page table is init_mm.pgd. + * + * NOTE! We MUST NOT take any locks for this case. We may + * be in an interrupt or a critical region, and should + * only copy the information from the master page table, + * nothing more. + */ + if (unlikely(fault_in_kernel_space(address))) { + if (vmalloc_fault(address) >= 0) return; - } - - pud = pud_offset(pgd, address); - pud_k = pud_offset(pgd_k, address); - - if (!pud_present(*pud)) { - if (!pud_present(*pud_k)) - goto bad_area_nosemaphore; - set_pud(pud, *pud_k); + if (notify_page_fault(regs, vec)) return; - } - pmd = pmd_offset(pud, address); - pmd_k = pmd_offset(pud_k, address); - if (pmd_present(*pmd) || !pmd_present(*pmd_k)) - goto bad_area_nosemaphore; - set_pmd(pmd, *pmd_k); - - return; + goto bad_area_nosemaphore; } - mm = tsk->mm; - - if (unlikely(notify_page_fault(regs, lookup_exception_vector()))) + if (unlikely(notify_page_fault(regs, vec))) return; /* Only enable interrupts if they were on before the fault */ @@ -115,8 +160,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); /* - * If we're in an interrupt or have no user - * context, we must not take the fault.. + * If we're in an interrupt, have no user context or are running + * in an atomic region then we must not take the fault: */ if (in_atomic() || !mm) goto no_context; @@ -132,10 +177,11 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, goto bad_area; if (expand_stack(vma, address)) goto bad_area; -/* - * Ok, we have a good vm_area for this memory access, so - * we can handle it.. - */ + + /* + * Ok, we have a good vm_area for this memory access, so + * we can handle it.. + */ good_area: si_code = SEGV_ACCERR; if (writeaccess) { @@ -173,10 +219,10 @@ survive: up_read(&mm->mmap_sem); return; -/* - * Something tried to access memory that isn't in our memory map.. - * Fix it, but check if it's kernel or user first.. - */ + /* + * Something tried to access memory that isn't in our memory map.. + * Fix it, but check if it's kernel or user first.. + */ bad_area: up_read(&mm->mmap_sem); diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c index 095d93bec7c..9b784fdb947 100644 --- a/arch/sh/mm/numa.c +++ b/arch/sh/mm/numa.c @@ -9,6 +9,7 @@ */ #include <linux/module.h> #include <linux/bootmem.h> +#include <linux/lmb.h> #include <linux/mm.h> #include <linux/numa.h> #include <linux/pfn.h> @@ -26,6 +27,15 @@ EXPORT_SYMBOL_GPL(node_data); void __init setup_memory(void) { unsigned long free_pfn = PFN_UP(__pa(_end)); + u64 base = min_low_pfn << PAGE_SHIFT; + u64 size = (max_low_pfn << PAGE_SHIFT) - min_low_pfn; + + lmb_add(base, size); + + /* Reserve the LMB regions used by the kernel, initrd, etc.. */ + lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET, + (PFN_PHYS(free_pfn) + PAGE_SIZE - 1) - + (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET)); /* * Node 0 sets up its pgdat at the first available pfn, @@ -45,24 +55,23 @@ void __init setup_memory(void) void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end) { - unsigned long bootmap_pages, bootmap_start, bootmap_size; - unsigned long start_pfn, free_pfn, end_pfn; + unsigned long bootmap_pages; + unsigned long start_pfn, end_pfn; + unsigned long bootmem_paddr; /* Don't allow bogus node assignment */ BUG_ON(nid > MAX_NUMNODES || nid == 0); - /* - * The free pfn starts at the beginning of the range, and is - * advanced as necessary for pgdat and node map allocations. - */ - free_pfn = start_pfn = start >> PAGE_SHIFT; + start_pfn = start >> PAGE_SHIFT; end_pfn = end >> PAGE_SHIFT; + lmb_add(start, end - start); + __add_active_range(nid, start_pfn, end_pfn); /* Node-local pgdat */ - NODE_DATA(nid) = pfn_to_kaddr(free_pfn); - free_pfn += PFN_UP(sizeof(struct pglist_data)); + NODE_DATA(nid) = __va(lmb_alloc_base(sizeof(struct pglist_data), + SMP_CACHE_BYTES, end_pfn)); memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); NODE_DATA(nid)->bdata = &bootmem_node_data[nid]; @@ -71,16 +80,17 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end) /* Node-local bootmap */ bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn); - bootmap_start = (unsigned long)pfn_to_kaddr(free_pfn); - bootmap_size = init_bootmem_node(NODE_DATA(nid), free_pfn, start_pfn, - end_pfn); + bootmem_paddr = lmb_alloc_base(bootmap_pages << PAGE_SHIFT, + PAGE_SIZE, end_pfn); + init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT, + start_pfn, end_pfn); free_bootmem_with_active_regions(nid, end_pfn); /* Reserve the pgdat and bootmap space with the bootmem allocator */ reserve_bootmem_node(NODE_DATA(nid), start_pfn << PAGE_SHIFT, sizeof(struct pglist_data), BOOTMEM_DEFAULT); - reserve_bootmem_node(NODE_DATA(nid), free_pfn << PAGE_SHIFT, + reserve_bootmem_node(NODE_DATA(nid), bootmem_paddr, bootmap_pages << PAGE_SHIFT, BOOTMEM_DEFAULT); /* It's up */ diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 4f3d99cd169..820487d0d5c 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -637,7 +637,7 @@ static void __exit sh_mobile_i2c_adap_exit(void) platform_driver_unregister(&sh_mobile_i2c_driver); } -module_init(sh_mobile_i2c_adap_init); +subsys_initcall(sh_mobile_i2c_adap_init); module_exit(sh_mobile_i2c_adap_exit); MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver"); diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 7f8e83a954a..b7f10bc25c2 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -360,16 +360,6 @@ config USB_M66592 default USB_GADGET select USB_GADGET_SELECTED -config SUPERH_BUILT_IN_M66592 - boolean "Enable SuperH built-in USB like the M66592" - depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722 - help - SH7722 has USB like the M66592. - - The transfer rate is very slow when use "Ethernet Gadget". - However, this problem is improved if change a value of - NET_IP_ALIGN to 4. - # # Controllers available only in discrete form (and all PCI controllers) # diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 43dcf9e1af6..a61c70caff1 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -31,38 +31,12 @@ #include "m66592-udc.h" - MODULE_DESCRIPTION("M66592 USB gadget driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Yoshihiro Shimoda"); MODULE_ALIAS("platform:m66592_udc"); -#define DRIVER_VERSION "18 Oct 2007" - -/* module parameters */ -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) -static unsigned short endian = M66592_LITTLE; -module_param(endian, ushort, 0644); -MODULE_PARM_DESC(endian, "data endian: big=0, little=0 (default=0)"); -#else -static unsigned short clock = M66592_XTAL24; -module_param(clock, ushort, 0644); -MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 " - "(default=16384)"); - -static unsigned short vif = M66592_LDRV; -module_param(vif, ushort, 0644); -MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0 (default=32768)"); - -static unsigned short endian; -module_param(endian, ushort, 0644); -MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)"); - -static unsigned short irq_sense = M66592_INTL; -module_param(irq_sense, ushort, 0644); -MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=2, falling edge=0 " - "(default=2)"); -#endif +#define DRIVER_VERSION "21 July 2009" static const char udc_name[] = "m66592_udc"; static const char *m66592_ep_name[] = { @@ -244,6 +218,7 @@ static inline int get_buffer_size(struct m66592 *m66592, u16 pipenum) static inline void pipe_change(struct m66592 *m66592, u16 pipenum) { struct m66592_ep *ep = m66592->pipenum2ep[pipenum]; + unsigned short mbw; if (ep->use_dma) return; @@ -252,7 +227,12 @@ static inline void pipe_change(struct m66592 *m66592, u16 pipenum) ndelay(450); - m66592_bset(m66592, M66592_MBW, ep->fifosel); + if (m66592->pdata->on_chip) + mbw = M66592_MBW_32; + else + mbw = M66592_MBW_16; + + m66592_bset(m66592, mbw, ep->fifosel); } static int pipe_buffer_setting(struct m66592 *m66592, @@ -276,24 +256,27 @@ static int pipe_buffer_setting(struct m66592 *m66592, buf_bsize = 0; break; case M66592_BULK: - bufnum = m66592->bi_bufnum + - (info->pipe - M66592_BASE_PIPENUM_BULK) * 16; - m66592->bi_bufnum += 16; + /* isochronous pipes may be used as bulk pipes */ + if (info->pipe > M66592_BASE_PIPENUM_BULK) + bufnum = info->pipe - M66592_BASE_PIPENUM_BULK; + else + bufnum = info->pipe - M66592_BASE_PIPENUM_ISOC; + + bufnum = M66592_BASE_BUFNUM + (bufnum * 16); buf_bsize = 7; pipecfg |= M66592_DBLB; if (!info->dir_in) pipecfg |= M66592_SHTNAK; break; case M66592_ISO: - bufnum = m66592->bi_bufnum + + bufnum = M66592_BASE_BUFNUM + (info->pipe - M66592_BASE_PIPENUM_ISOC) * 16; - m66592->bi_bufnum += 16; buf_bsize = 7; break; } - if (m66592->bi_bufnum > M66592_MAX_BUFNUM) { - pr_err("m66592 pipe memory is insufficient(%d)\n", - m66592->bi_bufnum); + + if (buf_bsize && ((bufnum + 16) >= M66592_MAX_BUFNUM)) { + pr_err("m66592 pipe memory is insufficient\n"); return -ENOMEM; } @@ -313,17 +296,6 @@ static void pipe_buffer_release(struct m66592 *m66592, if (info->pipe == 0) return; - switch (info->type) { - case M66592_BULK: - if (is_bulk_pipe(info->pipe)) - m66592->bi_bufnum -= 16; - break; - case M66592_ISO: - if (is_isoc_pipe(info->pipe)) - m66592->bi_bufnum -= 16; - break; - } - if (is_bulk_pipe(info->pipe)) { m66592->bulk--; } else if (is_interrupt_pipe(info->pipe)) @@ -340,6 +312,7 @@ static void pipe_buffer_release(struct m66592 *m66592, static void pipe_initialize(struct m66592_ep *ep) { struct m66592 *m66592 = ep->m66592; + unsigned short mbw; m66592_mdfy(m66592, 0, M66592_CURPIPE, ep->fifosel); @@ -351,7 +324,12 @@ static void pipe_initialize(struct m66592_ep *ep) ndelay(450); - m66592_bset(m66592, M66592_MBW, ep->fifosel); + if (m66592->pdata->on_chip) + mbw = M66592_MBW_32; + else + mbw = M66592_MBW_16; + + m66592_bset(m66592, mbw, ep->fifosel); } } @@ -367,15 +345,13 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep, ep->fifosel = M66592_D0FIFOSEL; ep->fifoctr = M66592_D0FIFOCTR; ep->fifotrn = M66592_D0FIFOTRN; -#if !defined(CONFIG_SUPERH_BUILT_IN_M66592) - } else if (m66592->num_dma == 1) { + } else if (!m66592->pdata->on_chip && m66592->num_dma == 1) { m66592->num_dma++; ep->use_dma = 1; ep->fifoaddr = M66592_D1FIFO; ep->fifosel = M66592_D1FIFOSEL; ep->fifoctr = M66592_D1FIFOCTR; ep->fifotrn = M66592_D1FIFOTRN; -#endif } else { ep->use_dma = 0; ep->fifoaddr = M66592_CFIFO; @@ -620,76 +596,120 @@ static void start_ep0(struct m66592_ep *ep, struct m66592_request *req) } } -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) static void init_controller(struct m66592 *m66592) { - m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ - m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); - m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); - m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); + unsigned int endian; - /* This is a workaound for SH7722 2nd cut */ - m66592_bset(m66592, 0x8000, M66592_DVSTCTR); - m66592_bset(m66592, 0x1000, M66592_TESTMODE); - m66592_bclr(m66592, 0x8000, M66592_DVSTCTR); + if (m66592->pdata->on_chip) { + if (m66592->pdata->endian) + endian = 0; /* big endian */ + else + endian = M66592_LITTLE; /* little endian */ - m66592_bset(m66592, M66592_INTL, M66592_INTENB1); + m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ + m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); + m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); + m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); - m66592_write(m66592, 0, M66592_CFBCFG); - m66592_write(m66592, 0, M66592_D0FBCFG); - m66592_bset(m66592, endian, M66592_CFBCFG); - m66592_bset(m66592, endian, M66592_D0FBCFG); -} -#else /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ -static void init_controller(struct m66592 *m66592) -{ - m66592_bset(m66592, (vif & M66592_LDRV) | (endian & M66592_BIGEND), - M66592_PINCFG); - m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ - m66592_mdfy(m66592, clock & M66592_XTAL, M66592_XTAL, M66592_SYSCFG); + /* This is a workaound for SH7722 2nd cut */ + m66592_bset(m66592, 0x8000, M66592_DVSTCTR); + m66592_bset(m66592, 0x1000, M66592_TESTMODE); + m66592_bclr(m66592, 0x8000, M66592_DVSTCTR); - m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); - m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); - m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); + m66592_bset(m66592, M66592_INTL, M66592_INTENB1); - m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); + m66592_write(m66592, 0, M66592_CFBCFG); + m66592_write(m66592, 0, M66592_D0FBCFG); + m66592_bset(m66592, endian, M66592_CFBCFG); + m66592_bset(m66592, endian, M66592_D0FBCFG); + } else { + unsigned int clock, vif, irq_sense; - msleep(3); + if (m66592->pdata->endian) + endian = M66592_BIGEND; /* big endian */ + else + endian = 0; /* little endian */ - m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG); + if (m66592->pdata->vif) + vif = M66592_LDRV; /* 3.3v */ + else + vif = 0; /* 1.5v */ - msleep(1); + switch (m66592->pdata->xtal) { + case M66592_PLATDATA_XTAL_12MHZ: + clock = M66592_XTAL12; + break; + case M66592_PLATDATA_XTAL_24MHZ: + clock = M66592_XTAL24; + break; + case M66592_PLATDATA_XTAL_48MHZ: + clock = M66592_XTAL48; + break; + default: + pr_warning("m66592-udc: xtal configuration error\n"); + clock = 0; + } - m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG); + switch (m66592->irq_trigger) { + case IRQF_TRIGGER_LOW: + irq_sense = M66592_INTL; + break; + case IRQF_TRIGGER_FALLING: + irq_sense = 0; + break; + default: + pr_warning("m66592-udc: irq trigger config error\n"); + irq_sense = 0; + } + + m66592_bset(m66592, + (vif & M66592_LDRV) | (endian & M66592_BIGEND), + M66592_PINCFG); + m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ + m66592_mdfy(m66592, clock & M66592_XTAL, M66592_XTAL, + M66592_SYSCFG); + m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); + m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); + m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); + + m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); + + msleep(3); - m66592_bset(m66592, irq_sense & M66592_INTL, M66592_INTENB1); - m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR, - M66592_DMA0CFG); + m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG); + + msleep(1); + + m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG); + + m66592_bset(m66592, irq_sense & M66592_INTL, M66592_INTENB1); + m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR, + M66592_DMA0CFG); + } } -#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ static void disable_controller(struct m66592 *m66592) { -#if !defined(CONFIG_SUPERH_BUILT_IN_M66592) - m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG); - udelay(1); - m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG); - udelay(1); - m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG); - udelay(1); - m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG); -#endif + if (!m66592->pdata->on_chip) { + m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG); + udelay(1); + m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG); + udelay(1); + m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG); + udelay(1); + m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG); + } } static void m66592_start_xclock(struct m66592 *m66592) { -#if !defined(CONFIG_SUPERH_BUILT_IN_M66592) u16 tmp; - tmp = m66592_read(m66592, M66592_SYSCFG); - if (!(tmp & M66592_XCKE)) - m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); -#endif + if (!m66592->pdata->on_chip) { + tmp = m66592_read(m66592, M66592_SYSCFG); + if (!(tmp & M66592_XCKE)) + m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); + } } /*-------------------------------------------------------------------------*/ @@ -1177,8 +1197,7 @@ static irqreturn_t m66592_irq(int irq, void *_m66592) intsts0 = m66592_read(m66592, M66592_INTSTS0); intenb0 = m66592_read(m66592, M66592_INTENB0); -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) - if (!intsts0 && !intenb0) { + if (m66592->pdata->on_chip && !intsts0 && !intenb0) { /* * When USB clock stops, it cannot read register. Even if a * clock stops, the interrupt occurs. So this driver turn on @@ -1188,7 +1207,6 @@ static irqreturn_t m66592_irq(int irq, void *_m66592) intsts0 = m66592_read(m66592, M66592_INTSTS0); intenb0 = m66592_read(m66592, M66592_INTENB0); } -#endif savepipe = m66592_read(m66592, M66592_CFIFOSEL); @@ -1534,9 +1552,11 @@ static int __exit m66592_remove(struct platform_device *pdev) iounmap(m66592->reg); free_irq(platform_get_irq(pdev, 0), m66592); m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) - clk_disable(m66592->clk); - clk_put(m66592->clk); +#ifdef CONFIG_HAVE_CLK + if (m66592->pdata->on_chip) { + clk_disable(m66592->clk); + clk_put(m66592->clk); + } #endif kfree(m66592); return 0; @@ -1548,11 +1568,10 @@ static void nop_completion(struct usb_ep *ep, struct usb_request *r) static int __init m66592_probe(struct platform_device *pdev) { - struct resource *res; - int irq; + struct resource *res, *ires; void __iomem *reg = NULL; struct m66592 *m66592 = NULL; -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK char clk_name[8]; #endif int ret = 0; @@ -1565,10 +1584,11 @@ static int __init m66592_probe(struct platform_device *pdev) goto clean_up; } - irq = platform_get_irq(pdev, 0); - if (irq < 0) { + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { ret = -ENODEV; - pr_err("platform_get_irq error.\n"); + dev_err(&pdev->dev, + "platform_get_resource IORESOURCE_IRQ error.\n"); goto clean_up; } @@ -1579,6 +1599,12 @@ static int __init m66592_probe(struct platform_device *pdev) goto clean_up; } + if (pdev->dev.platform_data == NULL) { + dev_err(&pdev->dev, "no platform data\n"); + ret = -ENODEV; + goto clean_up; + } + /* initialize ucd */ m66592 = kzalloc(sizeof(struct m66592), GFP_KERNEL); if (m66592 == NULL) { @@ -1586,6 +1612,9 @@ static int __init m66592_probe(struct platform_device *pdev) goto clean_up; } + m66592->pdata = pdev->dev.platform_data; + m66592->irq_trigger = ires->flags & IRQF_TRIGGER_MASK; + spin_lock_init(&m66592->lock); dev_set_drvdata(&pdev->dev, m66592); @@ -1603,24 +1632,25 @@ static int __init m66592_probe(struct platform_device *pdev) m66592->timer.data = (unsigned long)m66592; m66592->reg = reg; - m66592->bi_bufnum = M66592_BASE_BUFNUM; - - ret = request_irq(irq, m66592_irq, IRQF_DISABLED | IRQF_SHARED, + ret = request_irq(ires->start, m66592_irq, IRQF_DISABLED | IRQF_SHARED, udc_name, m66592); if (ret < 0) { pr_err("request_irq error (%d)\n", ret); goto clean_up; } -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) - snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id); - m66592->clk = clk_get(&pdev->dev, clk_name); - if (IS_ERR(m66592->clk)) { - dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); - ret = PTR_ERR(m66592->clk); - goto clean_up2; +#ifdef CONFIG_HAVE_CLK + if (m66592->pdata->on_chip) { + snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id); + m66592->clk = clk_get(&pdev->dev, clk_name); + if (IS_ERR(m66592->clk)) { + dev_err(&pdev->dev, "cannot get clock \"%s\"\n", + clk_name); + ret = PTR_ERR(m66592->clk); + goto clean_up2; + } + clk_enable(m66592->clk); } - clk_enable(m66592->clk); #endif INIT_LIST_HEAD(&m66592->gadget.ep_list); m66592->gadget.ep0 = &m66592->ep[0].ep; @@ -1662,12 +1692,14 @@ static int __init m66592_probe(struct platform_device *pdev) return 0; clean_up3: -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) - clk_disable(m66592->clk); - clk_put(m66592->clk); +#ifdef CONFIG_HAVE_CLK + if (m66592->pdata->on_chip) { + clk_disable(m66592->clk); + clk_put(m66592->clk); + } clean_up2: #endif - free_irq(irq, m66592); + free_irq(ires->start, m66592); clean_up: if (m66592) { if (m66592->ep0_req) diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h index 286ce07e796..8b960deed68 100644 --- a/drivers/usb/gadget/m66592-udc.h +++ b/drivers/usb/gadget/m66592-udc.h @@ -23,10 +23,12 @@ #ifndef __M66592_UDC_H__ #define __M66592_UDC_H__ -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK #include <linux/clk.h> #endif +#include <linux/usb/m66592.h> + #define M66592_SYSCFG 0x00 #define M66592_XTAL 0xC000 /* b15-14: Crystal selection */ #define M66592_XTAL48 0x8000 /* 48MHz */ @@ -76,11 +78,11 @@ #define M66592_P_TST_J 0x0001 /* PERI TEST J */ #define M66592_P_TST_NORMAL 0x0000 /* PERI Normal Mode */ -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) +/* built-in registers */ #define M66592_CFBCFG 0x0A #define M66592_D0FBCFG 0x0C #define M66592_LITTLE 0x0100 /* b8: Little endian mode */ -#else +/* external chip case */ #define M66592_PINCFG 0x0A #define M66592_LDRV 0x8000 /* b15: Drive Current Adjust */ #define M66592_BIGEND 0x0100 /* b8: Big endian mode */ @@ -100,8 +102,8 @@ #define M66592_PKTM 0x0020 /* b5: Packet mode */ #define M66592_DENDE 0x0010 /* b4: Dend enable */ #define M66592_OBUS 0x0004 /* b2: OUTbus mode */ -#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ +/* common case */ #define M66592_CFIFO 0x10 #define M66592_D0FIFO 0x14 #define M66592_D1FIFO 0x18 @@ -113,13 +115,9 @@ #define M66592_REW 0x4000 /* b14: Buffer rewind */ #define M66592_DCLRM 0x2000 /* b13: DMA buffer clear mode */ #define M66592_DREQE 0x1000 /* b12: DREQ output enable */ -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) -#define M66592_MBW 0x0800 /* b11: Maximum bit width for FIFO */ -#else -#define M66592_MBW 0x0400 /* b10: Maximum bit width for FIFO */ -#define M66592_MBW_8 0x0000 /* 8bit */ -#define M66592_MBW_16 0x0400 /* 16bit */ -#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ +#define M66592_MBW_8 0x0000 /* 8bit */ +#define M66592_MBW_16 0x0400 /* 16bit */ +#define M66592_MBW_32 0x0800 /* 32bit */ #define M66592_TRENB 0x0200 /* b9: Transaction counter enable */ #define M66592_TRCLR 0x0100 /* b8: Transaction counter clear */ #define M66592_DEZPM 0x0080 /* b7: Zero-length packet mode */ @@ -480,9 +478,11 @@ struct m66592_ep { struct m66592 { spinlock_t lock; void __iomem *reg; -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK struct clk *clk; #endif + struct m66592_platdata *pdata; + unsigned long irq_trigger; struct usb_gadget gadget; struct usb_gadget_driver *driver; @@ -506,7 +506,6 @@ struct m66592 { int interrupt; int isochronous; int num_dma; - int bi_bufnum; /* bulk and isochronous's bufnum */ }; #define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget) @@ -547,13 +546,13 @@ static inline void m66592_read_fifo(struct m66592 *m66592, { unsigned long fifoaddr = (unsigned long)m66592->reg + offset; -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) - len = (len + 3) / 4; - insl(fifoaddr, buf, len); -#else - len = (len + 1) / 2; - insw(fifoaddr, buf, len); -#endif + if (m66592->pdata->on_chip) { + len = (len + 3) / 4; + insl(fifoaddr, buf, len); + } else { + len = (len + 1) / 2; + insw(fifoaddr, buf, len); + } } static inline void m66592_write(struct m66592 *m66592, u16 val, @@ -567,33 +566,34 @@ static inline void m66592_write_fifo(struct m66592 *m66592, void *buf, unsigned long len) { unsigned long fifoaddr = (unsigned long)m66592->reg + offset; -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) - unsigned long count; - unsigned char *pb; - int i; - - count = len / 4; - outsl(fifoaddr, buf, count); - - if (len & 0x00000003) { - pb = buf + count * 4; - for (i = 0; i < (len & 0x00000003); i++) { - if (m66592_read(m66592, M66592_CFBCFG)) /* little */ - outb(pb[i], fifoaddr + (3 - i)); - else - outb(pb[i], fifoaddr + i); + + if (m66592->pdata->on_chip) { + unsigned long count; + unsigned char *pb; + int i; + + count = len / 4; + outsl(fifoaddr, buf, count); + + if (len & 0x00000003) { + pb = buf + count * 4; + for (i = 0; i < (len & 0x00000003); i++) { + if (m66592_read(m66592, M66592_CFBCFG)) /* le */ + outb(pb[i], fifoaddr + (3 - i)); + else + outb(pb[i], fifoaddr + i); + } + } + } else { + unsigned long odd = len & 0x0001; + + len = len / 2; + outsw(fifoaddr, buf, len); + if (odd) { + unsigned char *p = buf + len*2; + outb(*p, fifoaddr); } } -#else - unsigned long odd = len & 0x0001; - - len = len / 2; - outsw(fifoaddr, buf, len); - if (odd) { - unsigned char *p = buf + len*2; - outb(*p, fifoaddr); - } -#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ } static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat, diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1a920c70b5a..f21ca7d27a4 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -336,13 +336,6 @@ config USB_R8A66597_HCD To compile this driver as a module, choose M here: the module will be called r8a66597-hcd. -config SUPERH_ON_CHIP_R8A66597 - boolean "Enable SuperH on-chip R8A66597 USB" - depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724) - help - This driver enables support for the on-chip R8A66597 in the - SH7366, SH7723 and SH7724 processors. - config USB_WHCI_HCD tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" depends on EXPERIMENTAL diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index e18f74946e6..82dce3e0d4d 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -91,43 +91,43 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597) u16 tmp; int i = 0; -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) -#if defined(CONFIG_HAVE_CLK) - clk_enable(r8a66597->clk); + if (r8a66597->pdata->on_chip) { +#ifdef CONFIG_HAVE_CLK + clk_enable(r8a66597->clk); #endif - do { - r8a66597_write(r8a66597, SCKE, SYSCFG0); - tmp = r8a66597_read(r8a66597, SYSCFG0); - if (i++ > 1000) { - printk(KERN_ERR "r8a66597: register access fail.\n"); - return -ENXIO; - } - } while ((tmp & SCKE) != SCKE); - r8a66597_write(r8a66597, 0x04, 0x02); -#else - do { - r8a66597_write(r8a66597, USBE, SYSCFG0); - tmp = r8a66597_read(r8a66597, SYSCFG0); - if (i++ > 1000) { - printk(KERN_ERR "r8a66597: register access fail.\n"); - return -ENXIO; - } - } while ((tmp & USBE) != USBE); - r8a66597_bclr(r8a66597, USBE, SYSCFG0); - r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), XTAL, - SYSCFG0); + do { + r8a66597_write(r8a66597, SCKE, SYSCFG0); + tmp = r8a66597_read(r8a66597, SYSCFG0); + if (i++ > 1000) { + printk(KERN_ERR "r8a66597: reg access fail.\n"); + return -ENXIO; + } + } while ((tmp & SCKE) != SCKE); + r8a66597_write(r8a66597, 0x04, 0x02); + } else { + do { + r8a66597_write(r8a66597, USBE, SYSCFG0); + tmp = r8a66597_read(r8a66597, SYSCFG0); + if (i++ > 1000) { + printk(KERN_ERR "r8a66597: reg access fail.\n"); + return -ENXIO; + } + } while ((tmp & USBE) != USBE); + r8a66597_bclr(r8a66597, USBE, SYSCFG0); + r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), + XTAL, SYSCFG0); - i = 0; - r8a66597_bset(r8a66597, XCKE, SYSCFG0); - do { - msleep(1); - tmp = r8a66597_read(r8a66597, SYSCFG0); - if (i++ > 500) { - printk(KERN_ERR "r8a66597: register access fail.\n"); - return -ENXIO; - } - } while ((tmp & SCKE) != SCKE); -#endif /* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */ + i = 0; + r8a66597_bset(r8a66597, XCKE, SYSCFG0); + do { + msleep(1); + tmp = r8a66597_read(r8a66597, SYSCFG0); + if (i++ > 500) { + printk(KERN_ERR "r8a66597: reg access fail.\n"); + return -ENXIO; + } + } while ((tmp & SCKE) != SCKE); + } return 0; } @@ -136,15 +136,16 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597) { r8a66597_bclr(r8a66597, SCKE, SYSCFG0); udelay(1); -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) -#if defined(CONFIG_HAVE_CLK) - clk_disable(r8a66597->clk); -#endif -#else - r8a66597_bclr(r8a66597, PLLC, SYSCFG0); - r8a66597_bclr(r8a66597, XCKE, SYSCFG0); - r8a66597_bclr(r8a66597, USBE, SYSCFG0); + + if (r8a66597->pdata->on_chip) { +#ifdef CONFIG_HAVE_CLK + clk_disable(r8a66597->clk); #endif + } else { + r8a66597_bclr(r8a66597, PLLC, SYSCFG0); + r8a66597_bclr(r8a66597, XCKE, SYSCFG0); + r8a66597_bclr(r8a66597, USBE, SYSCFG0); + } } static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port) @@ -205,7 +206,7 @@ static int enable_controller(struct r8a66597 *r8a66597) r8a66597_bset(r8a66597, SIGNE | SACKE, INTENB1); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + for (port = 0; port < r8a66597->max_root_hub; port++) r8a66597_enable_port(r8a66597, port); return 0; @@ -218,7 +219,7 @@ static void disable_controller(struct r8a66597 *r8a66597) r8a66597_write(r8a66597, 0, INTENB0); r8a66597_write(r8a66597, 0, INTSTS0); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + for (port = 0; port < r8a66597->max_root_hub; port++) r8a66597_disable_port(r8a66597, port); r8a66597_clock_disable(r8a66597); @@ -249,11 +250,12 @@ static int is_hub_limit(char *devpath) return ((strlen(devpath) >= 4) ? 1 : 0); } -static void get_port_number(char *devpath, u16 *root_port, u16 *hub_port) +static void get_port_number(struct r8a66597 *r8a66597, + char *devpath, u16 *root_port, u16 *hub_port) { if (root_port) { *root_port = (devpath[0] & 0x0F) - 1; - if (*root_port >= R8A66597_MAX_ROOT_HUB) + if (*root_port >= r8a66597->max_root_hub) printk(KERN_ERR "r8a66597: Illegal root port number.\n"); } if (hub_port) @@ -355,7 +357,8 @@ static int make_r8a66597_device(struct r8a66597 *r8a66597, INIT_LIST_HEAD(&dev->device_list); list_add_tail(&dev->device_list, &r8a66597->child_device); - get_port_number(urb->dev->devpath, &dev->root_port, &dev->hub_port); + get_port_number(r8a66597, urb->dev->devpath, + &dev->root_port, &dev->hub_port); if (!is_child_device(urb->dev->devpath)) r8a66597->root_hub[dev->root_port].dev = dev; @@ -420,7 +423,7 @@ static void free_usb_address(struct r8a66597 *r8a66597, list_del(&dev->device_list); kfree(dev); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + for (port = 0; port < r8a66597->max_root_hub; port++) { if (r8a66597->root_hub[port].dev == dev) { r8a66597->root_hub[port].dev = NULL; break; @@ -495,10 +498,20 @@ static void r8a66597_pipe_toggle(struct r8a66597 *r8a66597, r8a66597_bset(r8a66597, SQCLR, pipe->pipectr); } +static inline unsigned short mbw_value(struct r8a66597 *r8a66597) +{ + if (r8a66597->pdata->on_chip) + return MBW_32; + else + return MBW_16; +} + /* this function must be called with interrupt disabled */ static inline void cfifo_change(struct r8a66597 *r8a66597, u16 pipenum) { - r8a66597_mdfy(r8a66597, MBW | pipenum, MBW | CURPIPE, CFIFOSEL); + unsigned short mbw = mbw_value(r8a66597); + + r8a66597_mdfy(r8a66597, mbw | pipenum, mbw | CURPIPE, CFIFOSEL); r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, pipenum); } @@ -506,11 +519,13 @@ static inline void cfifo_change(struct r8a66597 *r8a66597, u16 pipenum) static inline void fifo_change_from_pipe(struct r8a66597 *r8a66597, struct r8a66597_pipe *pipe) { + unsigned short mbw = mbw_value(r8a66597); + cfifo_change(r8a66597, 0); - r8a66597_mdfy(r8a66597, MBW | 0, MBW | CURPIPE, D0FIFOSEL); - r8a66597_mdfy(r8a66597, MBW | 0, MBW | CURPIPE, D1FIFOSEL); + r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D0FIFOSEL); + r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D1FIFOSEL); - r8a66597_mdfy(r8a66597, MBW | pipe->info.pipenum, MBW | CURPIPE, + r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum, mbw | CURPIPE, pipe->fifosel); r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE, pipe->info.pipenum); } @@ -742,9 +757,13 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597, struct r8a66597_pipe *pipe, struct urb *urb) { -#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597) int i; struct r8a66597_pipe_info *info = &pipe->info; + unsigned short mbw = mbw_value(r8a66597); + + /* pipe dma is only for external controlles */ + if (r8a66597->pdata->on_chip) + return; if ((pipe->info.pipenum != 0) && (info->type != R8A66597_INT)) { for (i = 0; i < R8A66597_MAX_DMA_CHANNEL; i++) { @@ -763,8 +782,8 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597, set_pipe_reg_addr(pipe, i); cfifo_change(r8a66597, 0); - r8a66597_mdfy(r8a66597, MBW | pipe->info.pipenum, - MBW | CURPIPE, pipe->fifosel); + r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum, + mbw | CURPIPE, pipe->fifosel); r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE, pipe->info.pipenum); @@ -772,7 +791,6 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597, break; } } -#endif /* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */ } /* this function must be called with interrupt disabled */ @@ -1769,7 +1787,7 @@ static void r8a66597_timer(unsigned long _r8a66597) spin_lock_irqsave(&r8a66597->lock, flags); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + for (port = 0; port < r8a66597->max_root_hub; port++) r8a66597_root_hub_control(r8a66597, port); spin_unlock_irqrestore(&r8a66597->lock, flags); @@ -1807,7 +1825,7 @@ static void set_address_zero(struct r8a66597 *r8a66597, struct urb *urb) u16 root_port, hub_port; if (usb_address == 0) { - get_port_number(urb->dev->devpath, + get_port_number(r8a66597, urb->dev->devpath, &root_port, &hub_port); set_devadd_reg(r8a66597, 0, get_r8a66597_usb_speed(urb->dev->speed), @@ -2082,7 +2100,7 @@ static int r8a66597_hub_status_data(struct usb_hcd *hcd, char *buf) *buf = 0; /* initialize (no change) */ - for (i = 0; i < R8A66597_MAX_ROOT_HUB; i++) { + for (i = 0; i < r8a66597->max_root_hub; i++) { if (r8a66597->root_hub[i].port & 0xffff0000) *buf |= 1 << (i + 1); } @@ -2097,11 +2115,11 @@ static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597, { desc->bDescriptorType = 0x29; desc->bHubContrCurrent = 0; - desc->bNbrPorts = R8A66597_MAX_ROOT_HUB; + desc->bNbrPorts = r8a66597->max_root_hub; desc->bDescLength = 9; desc->bPwrOn2PwrGood = 0; desc->wHubCharacteristics = cpu_to_le16(0x0011); - desc->bitmap[0] = ((1 << R8A66597_MAX_ROOT_HUB) - 1) << 1; + desc->bitmap[0] = ((1 << r8a66597->max_root_hub) - 1) << 1; desc->bitmap[1] = ~0; } @@ -2129,7 +2147,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } break; case ClearPortFeature: - if (wIndex > R8A66597_MAX_ROOT_HUB) + if (wIndex > r8a66597->max_root_hub) goto error; if (wLength != 0) goto error; @@ -2162,12 +2180,12 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, *buf = 0x00; break; case GetPortStatus: - if (wIndex > R8A66597_MAX_ROOT_HUB) + if (wIndex > r8a66597->max_root_hub) goto error; *(__le32 *)buf = cpu_to_le32(rh->port); break; case SetPortFeature: - if (wIndex > R8A66597_MAX_ROOT_HUB) + if (wIndex > r8a66597->max_root_hub) goto error; if (wLength != 0) goto error; @@ -2216,7 +2234,7 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd) dbg("%s", __func__); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + for (port = 0; port < r8a66597->max_root_hub; port++) { struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; unsigned long dvstctr_reg = get_dvstctr_reg(port); @@ -2247,7 +2265,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd) dbg("%s", __func__); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + for (port = 0; port < r8a66597->max_root_hub; port++) { struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; unsigned long dvstctr_reg = get_dvstctr_reg(port); @@ -2305,16 +2323,16 @@ static struct hc_driver r8a66597_hc_driver = { }; #if defined(CONFIG_PM) -static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state) +static int r8a66597_suspend(struct device *dev) { - struct r8a66597 *r8a66597 = dev_get_drvdata(&pdev->dev); + struct r8a66597 *r8a66597 = dev_get_drvdata(dev); int port; dbg("%s", __func__); disable_controller(r8a66597); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + for (port = 0; port < r8a66597->max_root_hub; port++) { struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; rh->port = 0x00000000; @@ -2323,9 +2341,9 @@ static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state) return 0; } -static int r8a66597_resume(struct platform_device *pdev) +static int r8a66597_resume(struct device *dev) { - struct r8a66597 *r8a66597 = dev_get_drvdata(&pdev->dev); + struct r8a66597 *r8a66597 = dev_get_drvdata(dev); struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597); dbg("%s", __func__); @@ -2335,9 +2353,15 @@ static int r8a66597_resume(struct platform_device *pdev) return 0; } + +static struct dev_pm_ops r8a66597_dev_pm_ops = { + .suspend = r8a66597_suspend, + .resume = r8a66597_resume, +}; + +#define R8A66597_DEV_PM_OPS (&r8a66597_dev_pm_ops) #else /* if defined(CONFIG_PM) */ -#define r8a66597_suspend NULL -#define r8a66597_resume NULL +#define R8A66597_DEV_PM_OPS NULL #endif static int __init_or_module r8a66597_remove(struct platform_device *pdev) @@ -2348,8 +2372,9 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev) del_timer_sync(&r8a66597->rh_timer); usb_remove_hcd(hcd); iounmap((void *)r8a66597->reg); -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) - clk_put(r8a66597->clk); +#ifdef CONFIG_HAVE_CLK + if (r8a66597->pdata->on_chip) + clk_put(r8a66597->clk); #endif usb_put_hcd(hcd); return 0; @@ -2357,7 +2382,7 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev) static int __devinit r8a66597_probe(struct platform_device *pdev) { -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK char clk_name[8]; #endif struct resource *res = NULL, *ires; @@ -2419,15 +2444,20 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) r8a66597->pdata = pdev->dev.platform_data; r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW; -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) - snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id); - r8a66597->clk = clk_get(&pdev->dev, clk_name); - if (IS_ERR(r8a66597->clk)) { - dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); - ret = PTR_ERR(r8a66597->clk); - goto clean_up2; - } + if (r8a66597->pdata->on_chip) { +#ifdef CONFIG_HAVE_CLK + snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id); + r8a66597->clk = clk_get(&pdev->dev, clk_name); + if (IS_ERR(r8a66597->clk)) { + dev_err(&pdev->dev, "cannot get clock \"%s\"\n", + clk_name); + ret = PTR_ERR(r8a66597->clk); + goto clean_up2; + } #endif + r8a66597->max_root_hub = 1; + } else + r8a66597->max_root_hub = 2; spin_lock_init(&r8a66597->lock); init_timer(&r8a66597->rh_timer); @@ -2457,8 +2487,9 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) return 0; clean_up3: -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) - clk_put(r8a66597->clk); +#ifdef CONFIG_HAVE_CLK + if (r8a66597->pdata->on_chip) + clk_put(r8a66597->clk); clean_up2: #endif usb_put_hcd(hcd); @@ -2473,11 +2504,10 @@ clean_up: static struct platform_driver r8a66597_driver = { .probe = r8a66597_probe, .remove = r8a66597_remove, - .suspend = r8a66597_suspend, - .resume = r8a66597_resume, .driver = { .name = (char *) hcd_name, .owner = THIS_MODULE, + .pm = R8A66597_DEV_PM_OPS, }, }; diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h index d72680b433f..228e3fb2385 100644 --- a/drivers/usb/host/r8a66597.h +++ b/drivers/usb/host/r8a66597.h @@ -26,390 +26,16 @@ #ifndef __R8A66597_H__ #define __R8A66597_H__ -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK #include <linux/clk.h> #endif #include <linux/usb/r8a66597.h> -#define SYSCFG0 0x00 -#define SYSCFG1 0x02 -#define SYSSTS0 0x04 -#define SYSSTS1 0x06 -#define DVSTCTR0 0x08 -#define DVSTCTR1 0x0A -#define TESTMODE 0x0C -#define PINCFG 0x0E -#define DMA0CFG 0x10 -#define DMA1CFG 0x12 -#define CFIFO 0x14 -#define D0FIFO 0x18 -#define D1FIFO 0x1C -#define CFIFOSEL 0x20 -#define CFIFOCTR 0x22 -#define CFIFOSIE 0x24 -#define D0FIFOSEL 0x28 -#define D0FIFOCTR 0x2A -#define D1FIFOSEL 0x2C -#define D1FIFOCTR 0x2E -#define INTENB0 0x30 -#define INTENB1 0x32 -#define INTENB2 0x34 -#define BRDYENB 0x36 -#define NRDYENB 0x38 -#define BEMPENB 0x3A -#define SOFCFG 0x3C -#define INTSTS0 0x40 -#define INTSTS1 0x42 -#define INTSTS2 0x44 -#define BRDYSTS 0x46 -#define NRDYSTS 0x48 -#define BEMPSTS 0x4A -#define FRMNUM 0x4C -#define UFRMNUM 0x4E -#define USBADDR 0x50 -#define USBREQ 0x54 -#define USBVAL 0x56 -#define USBINDX 0x58 -#define USBLENG 0x5A -#define DCPCFG 0x5C -#define DCPMAXP 0x5E -#define DCPCTR 0x60 -#define PIPESEL 0x64 -#define PIPECFG 0x68 -#define PIPEBUF 0x6A -#define PIPEMAXP 0x6C -#define PIPEPERI 0x6E -#define PIPE1CTR 0x70 -#define PIPE2CTR 0x72 -#define PIPE3CTR 0x74 -#define PIPE4CTR 0x76 -#define PIPE5CTR 0x78 -#define PIPE6CTR 0x7A -#define PIPE7CTR 0x7C -#define PIPE8CTR 0x7E -#define PIPE9CTR 0x80 -#define PIPE1TRE 0x90 -#define PIPE1TRN 0x92 -#define PIPE2TRE 0x94 -#define PIPE2TRN 0x96 -#define PIPE3TRE 0x98 -#define PIPE3TRN 0x9A -#define PIPE4TRE 0x9C -#define PIPE4TRN 0x9E -#define PIPE5TRE 0xA0 -#define PIPE5TRN 0xA2 -#define DEVADD0 0xD0 -#define DEVADD1 0xD2 -#define DEVADD2 0xD4 -#define DEVADD3 0xD6 -#define DEVADD4 0xD8 -#define DEVADD5 0xDA -#define DEVADD6 0xDC -#define DEVADD7 0xDE -#define DEVADD8 0xE0 -#define DEVADD9 0xE2 -#define DEVADDA 0xE4 - -/* System Configuration Control Register */ -#define XTAL 0xC000 /* b15-14: Crystal selection */ -#define XTAL48 0x8000 /* 48MHz */ -#define XTAL24 0x4000 /* 24MHz */ -#define XTAL12 0x0000 /* 12MHz */ -#define XCKE 0x2000 /* b13: External clock enable */ -#define PLLC 0x0800 /* b11: PLL control */ -#define SCKE 0x0400 /* b10: USB clock enable */ -#define PCSDIS 0x0200 /* b9: not CS wakeup */ -#define LPSME 0x0100 /* b8: Low power sleep mode */ -#define HSE 0x0080 /* b7: Hi-speed enable */ -#define DCFM 0x0040 /* b6: Controller function select */ -#define DRPD 0x0020 /* b5: D+/- pull down control */ -#define DPRPU 0x0010 /* b4: D+ pull up control */ -#define USBE 0x0001 /* b0: USB module operation enable */ - -/* System Configuration Status Register */ -#define OVCBIT 0x8000 /* b15-14: Over-current bit */ -#define OVCMON 0xC000 /* b15-14: Over-current monitor */ -#define SOFEA 0x0020 /* b5: SOF monitor */ -#define IDMON 0x0004 /* b3: ID-pin monitor */ -#define LNST 0x0003 /* b1-0: D+, D- line status */ -#define SE1 0x0003 /* SE1 */ -#define FS_KSTS 0x0002 /* Full-Speed K State */ -#define FS_JSTS 0x0001 /* Full-Speed J State */ -#define LS_JSTS 0x0002 /* Low-Speed J State */ -#define LS_KSTS 0x0001 /* Low-Speed K State */ -#define SE0 0x0000 /* SE0 */ - -/* Device State Control Register */ -#define EXTLP0 0x0400 /* b10: External port */ -#define VBOUT 0x0200 /* b9: VBUS output */ -#define WKUP 0x0100 /* b8: Remote wakeup */ -#define RWUPE 0x0080 /* b7: Remote wakeup sense */ -#define USBRST 0x0040 /* b6: USB reset enable */ -#define RESUME 0x0020 /* b5: Resume enable */ -#define UACT 0x0010 /* b4: USB bus enable */ -#define RHST 0x0007 /* b1-0: Reset handshake status */ -#define HSPROC 0x0004 /* HS handshake is processing */ -#define HSMODE 0x0003 /* Hi-Speed mode */ -#define FSMODE 0x0002 /* Full-Speed mode */ -#define LSMODE 0x0001 /* Low-Speed mode */ -#define UNDECID 0x0000 /* Undecided */ - -/* Test Mode Register */ -#define UTST 0x000F /* b3-0: Test select */ -#define H_TST_PACKET 0x000C /* HOST TEST Packet */ -#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */ -#define H_TST_K 0x000A /* HOST TEST K */ -#define H_TST_J 0x0009 /* HOST TEST J */ -#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */ -#define P_TST_PACKET 0x0004 /* PERI TEST Packet */ -#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */ -#define P_TST_K 0x0002 /* PERI TEST K */ -#define P_TST_J 0x0001 /* PERI TEST J */ -#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */ - -/* Data Pin Configuration Register */ -#define LDRV 0x8000 /* b15: Drive Current Adjust */ -#define VIF1 0x0000 /* VIF = 1.8V */ -#define VIF3 0x8000 /* VIF = 3.3V */ -#define INTA 0x0001 /* b1: USB INT-pin active */ - -/* DMAx Pin Configuration Register */ -#define DREQA 0x4000 /* b14: Dreq active select */ -#define BURST 0x2000 /* b13: Burst mode */ -#define DACKA 0x0400 /* b10: Dack active select */ -#define DFORM 0x0380 /* b9-7: DMA mode select */ -#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */ -#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */ -#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */ -#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */ -#define DENDA 0x0040 /* b6: Dend active select */ -#define PKTM 0x0020 /* b5: Packet mode */ -#define DENDE 0x0010 /* b4: Dend enable */ -#define OBUS 0x0004 /* b2: OUTbus mode */ - -/* CFIFO/DxFIFO Port Select Register */ -#define RCNT 0x8000 /* b15: Read count mode */ -#define REW 0x4000 /* b14: Buffer rewind */ -#define DCLRM 0x2000 /* b13: DMA buffer clear mode */ -#define DREQE 0x1000 /* b12: DREQ output enable */ -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) -#define MBW 0x0800 -#else -#define MBW 0x0400 /* b10: Maximum bit width for FIFO access */ -#endif -#define MBW_8 0x0000 /* 8bit */ -#define MBW_16 0x0400 /* 16bit */ -#define BIGEND 0x0100 /* b8: Big endian mode */ -#define BYTE_LITTLE 0x0000 /* little dendian */ -#define BYTE_BIG 0x0100 /* big endifan */ -#define ISEL 0x0020 /* b5: DCP FIFO port direction select */ -#define CURPIPE 0x000F /* b2-0: PIPE select */ - -/* CFIFO/DxFIFO Port Control Register */ -#define BVAL 0x8000 /* b15: Buffer valid flag */ -#define BCLR 0x4000 /* b14: Buffer clear */ -#define FRDY 0x2000 /* b13: FIFO ready */ -#define DTLN 0x0FFF /* b11-0: FIFO received data length */ - -/* Interrupt Enable Register 0 */ -#define VBSE 0x8000 /* b15: VBUS interrupt */ -#define RSME 0x4000 /* b14: Resume interrupt */ -#define SOFE 0x2000 /* b13: Frame update interrupt */ -#define DVSE 0x1000 /* b12: Device state transition interrupt */ -#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */ -#define BEMPE 0x0400 /* b10: Buffer empty interrupt */ -#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */ -#define BRDYE 0x0100 /* b8: Buffer ready interrupt */ - -/* Interrupt Enable Register 1 */ -#define OVRCRE 0x8000 /* b15: Over-current interrupt */ -#define BCHGE 0x4000 /* b14: USB us chenge interrupt */ -#define DTCHE 0x1000 /* b12: Detach sense interrupt */ -#define ATTCHE 0x0800 /* b11: Attach sense interrupt */ -#define EOFERRE 0x0040 /* b6: EOF error interrupt */ -#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */ -#define SACKE 0x0010 /* b4: SETUP ACK interrupt */ - -/* BRDY Interrupt Enable/Status Register */ -#define BRDY9 0x0200 /* b9: PIPE9 */ -#define BRDY8 0x0100 /* b8: PIPE8 */ -#define BRDY7 0x0080 /* b7: PIPE7 */ -#define BRDY6 0x0040 /* b6: PIPE6 */ -#define BRDY5 0x0020 /* b5: PIPE5 */ -#define BRDY4 0x0010 /* b4: PIPE4 */ -#define BRDY3 0x0008 /* b3: PIPE3 */ -#define BRDY2 0x0004 /* b2: PIPE2 */ -#define BRDY1 0x0002 /* b1: PIPE1 */ -#define BRDY0 0x0001 /* b1: PIPE0 */ - -/* NRDY Interrupt Enable/Status Register */ -#define NRDY9 0x0200 /* b9: PIPE9 */ -#define NRDY8 0x0100 /* b8: PIPE8 */ -#define NRDY7 0x0080 /* b7: PIPE7 */ -#define NRDY6 0x0040 /* b6: PIPE6 */ -#define NRDY5 0x0020 /* b5: PIPE5 */ -#define NRDY4 0x0010 /* b4: PIPE4 */ -#define NRDY3 0x0008 /* b3: PIPE3 */ -#define NRDY2 0x0004 /* b2: PIPE2 */ -#define NRDY1 0x0002 /* b1: PIPE1 */ -#define NRDY0 0x0001 /* b1: PIPE0 */ - -/* BEMP Interrupt Enable/Status Register */ -#define BEMP9 0x0200 /* b9: PIPE9 */ -#define BEMP8 0x0100 /* b8: PIPE8 */ -#define BEMP7 0x0080 /* b7: PIPE7 */ -#define BEMP6 0x0040 /* b6: PIPE6 */ -#define BEMP5 0x0020 /* b5: PIPE5 */ -#define BEMP4 0x0010 /* b4: PIPE4 */ -#define BEMP3 0x0008 /* b3: PIPE3 */ -#define BEMP2 0x0004 /* b2: PIPE2 */ -#define BEMP1 0x0002 /* b1: PIPE1 */ -#define BEMP0 0x0001 /* b0: PIPE0 */ - -/* SOF Pin Configuration Register */ -#define TRNENSEL 0x0100 /* b8: Select transaction enable period */ -#define BRDYM 0x0040 /* b6: BRDY clear timing */ -#define INTL 0x0020 /* b5: Interrupt sense select */ -#define EDGESTS 0x0010 /* b4: */ -#define SOFMODE 0x000C /* b3-2: SOF pin select */ -#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */ -#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */ -#define SOF_DISABLE 0x0000 /* SOF OUT Disable */ - -/* Interrupt Status Register 0 */ -#define VBINT 0x8000 /* b15: VBUS interrupt */ -#define RESM 0x4000 /* b14: Resume interrupt */ -#define SOFR 0x2000 /* b13: SOF frame update interrupt */ -#define DVST 0x1000 /* b12: Device state transition interrupt */ -#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */ -#define BEMP 0x0400 /* b10: Buffer empty interrupt */ -#define NRDY 0x0200 /* b9: Buffer not ready interrupt */ -#define BRDY 0x0100 /* b8: Buffer ready interrupt */ -#define VBSTS 0x0080 /* b7: VBUS input port */ -#define DVSQ 0x0070 /* b6-4: Device state */ -#define DS_SPD_CNFG 0x0070 /* Suspend Configured */ -#define DS_SPD_ADDR 0x0060 /* Suspend Address */ -#define DS_SPD_DFLT 0x0050 /* Suspend Default */ -#define DS_SPD_POWR 0x0040 /* Suspend Powered */ -#define DS_SUSP 0x0040 /* Suspend */ -#define DS_CNFG 0x0030 /* Configured */ -#define DS_ADDS 0x0020 /* Address */ -#define DS_DFLT 0x0010 /* Default */ -#define DS_POWR 0x0000 /* Powered */ -#define DVSQS 0x0030 /* b5-4: Device state */ -#define VALID 0x0008 /* b3: Setup packet detected flag */ -#define CTSQ 0x0007 /* b2-0: Control transfer stage */ -#define CS_SQER 0x0006 /* Sequence error */ -#define CS_WRND 0x0005 /* Control write nodata status stage */ -#define CS_WRSS 0x0004 /* Control write status stage */ -#define CS_WRDS 0x0003 /* Control write data stage */ -#define CS_RDSS 0x0002 /* Control read status stage */ -#define CS_RDDS 0x0001 /* Control read data stage */ -#define CS_IDST 0x0000 /* Idle or setup stage */ - -/* Interrupt Status Register 1 */ -#define OVRCR 0x8000 /* b15: Over-current interrupt */ -#define BCHG 0x4000 /* b14: USB bus chenge interrupt */ -#define DTCH 0x1000 /* b12: Detach sense interrupt */ -#define ATTCH 0x0800 /* b11: Attach sense interrupt */ -#define EOFERR 0x0040 /* b6: EOF-error interrupt */ -#define SIGN 0x0020 /* b5: Setup ignore interrupt */ -#define SACK 0x0010 /* b4: Setup acknowledge interrupt */ - -/* Frame Number Register */ -#define OVRN 0x8000 /* b15: Overrun error */ -#define CRCE 0x4000 /* b14: Received data error */ -#define FRNM 0x07FF /* b10-0: Frame number */ - -/* Micro Frame Number Register */ -#define UFRNM 0x0007 /* b2-0: Micro frame number */ - -/* Default Control Pipe Maxpacket Size Register */ -/* Pipe Maxpacket Size Register */ -#define DEVSEL 0xF000 /* b15-14: Device address select */ -#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */ - -/* Default Control Pipe Control Register */ -#define BSTS 0x8000 /* b15: Buffer status */ -#define SUREQ 0x4000 /* b14: Send USB request */ -#define CSCLR 0x2000 /* b13: complete-split status clear */ -#define CSSTS 0x1000 /* b12: complete-split status */ -#define SUREQCLR 0x0800 /* b11: stop setup request */ -#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ -#define SQSET 0x0080 /* b7: Sequence toggle bit set */ -#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ -#define PBUSY 0x0020 /* b5: pipe busy */ -#define PINGE 0x0010 /* b4: ping enable */ -#define CCPL 0x0004 /* b2: Enable control transfer complete */ -#define PID 0x0003 /* b1-0: Response PID */ -#define PID_STALL11 0x0003 /* STALL */ -#define PID_STALL 0x0002 /* STALL */ -#define PID_BUF 0x0001 /* BUF */ -#define PID_NAK 0x0000 /* NAK */ - -/* Pipe Window Select Register */ -#define PIPENM 0x0007 /* b2-0: Pipe select */ - -/* Pipe Configuration Register */ -#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */ -#define R8A66597_ISO 0xC000 /* Isochronous */ -#define R8A66597_INT 0x8000 /* Interrupt */ -#define R8A66597_BULK 0x4000 /* Bulk */ -#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */ -#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */ -#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */ -#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */ -#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */ -#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */ - -/* Pipe Buffer Configuration Register */ -#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */ -#define BUFNMB 0x007F /* b6-0: Pipe buffer number */ -#define PIPE0BUF 256 -#define PIPExBUF 64 - -/* Pipe Maxpacket Size Register */ -#define MXPS 0x07FF /* b10-0: Maxpacket size */ - -/* Pipe Cycle Configuration Register */ -#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */ -#define IITV 0x0007 /* b2-0: Isochronous interval */ - -/* Pipex Control Register */ -#define BSTS 0x8000 /* b15: Buffer status */ -#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */ -#define CSCLR 0x2000 /* b13: complete-split status clear */ -#define CSSTS 0x1000 /* b12: complete-split status */ -#define ATREPM 0x0400 /* b10: Auto repeat mode */ -#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */ -#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ -#define SQSET 0x0080 /* b7: Sequence toggle bit set */ -#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ -#define PBUSY 0x0020 /* b5: pipe busy */ -#define PID 0x0003 /* b1-0: Response PID */ - -/* PIPExTRE */ -#define TRENB 0x0200 /* b9: Transaction counter enable */ -#define TRCLR 0x0100 /* b8: Transaction counter clear */ - -/* PIPExTRN */ -#define TRNCNT 0xFFFF /* b15-0: Transaction counter */ - -/* DEVADDx */ -#define UPPHUB 0x7800 -#define HUBPORT 0x0700 -#define USBSPD 0x00C0 -#define RTPORT 0x0001 - #define R8A66597_MAX_NUM_PIPE 10 #define R8A66597_BUF_BSIZE 8 #define R8A66597_MAX_DEVICE 10 -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) -#define R8A66597_MAX_ROOT_HUB 1 -#else #define R8A66597_MAX_ROOT_HUB 2 -#endif #define R8A66597_MAX_SAMPLING 5 #define R8A66597_RH_POLL_TIME 10 #define R8A66597_MAX_DMA_CHANNEL 2 @@ -487,7 +113,7 @@ struct r8a66597_root_hub { struct r8a66597 { spinlock_t lock; unsigned long reg; -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK struct clk *clk; #endif struct r8a66597_platdata *pdata; @@ -504,6 +130,7 @@ struct r8a66597 { unsigned short interval_map; unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE]; unsigned char dma_map; + unsigned int max_root_hub; struct list_head child_device; unsigned long child_connect_map[4]; @@ -550,21 +177,22 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597, unsigned long offset, u16 *buf, int len) { -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) unsigned long fifoaddr = r8a66597->reg + offset; unsigned long count; - count = len / 4; - insl(fifoaddr, buf, count); + if (r8a66597->pdata->on_chip) { + count = len / 4; + insl(fifoaddr, buf, count); - if (len & 0x00000003) { - unsigned long tmp = inl(fifoaddr); - memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03); + if (len & 0x00000003) { + unsigned long tmp = inl(fifoaddr); + memcpy((unsigned char *)buf + count * 4, &tmp, + len & 0x03); + } + } else { + len = (len + 1) / 2; + insw(fifoaddr, buf, len); } -#else - len = (len + 1) / 2; - insw(r8a66597->reg + offset, buf, len); -#endif } static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val, @@ -578,33 +206,33 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, int len) { unsigned long fifoaddr = r8a66597->reg + offset; -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) unsigned long count; unsigned char *pb; int i; - count = len / 4; - outsl(fifoaddr, buf, count); + if (r8a66597->pdata->on_chip) { + count = len / 4; + outsl(fifoaddr, buf, count); + + if (len & 0x00000003) { + pb = (unsigned char *)buf + count * 4; + for (i = 0; i < (len & 0x00000003); i++) { + if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND) + outb(pb[i], fifoaddr + i); + else + outb(pb[i], fifoaddr + 3 - i); + } + } + } else { + int odd = len & 0x0001; - if (len & 0x00000003) { - pb = (unsigned char *)buf + count * 4; - for (i = 0; i < (len & 0x00000003); i++) { - if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND) - outb(pb[i], fifoaddr + i); - else - outb(pb[i], fifoaddr + 3 - i); + len = len / 2; + outsw(fifoaddr, buf, len); + if (unlikely(odd)) { + buf = &buf[len]; + outb((unsigned char)*buf, fifoaddr); } } -#else - int odd = len & 0x0001; - - len = len / 2; - outsw(fifoaddr, buf, len); - if (unlikely(odd)) { - buf = &buf[len]; - outb((unsigned char)*buf, fifoaddr); - } -#endif } static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 3b54b394017..7e2c9774f08 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1867,7 +1867,7 @@ config FB_W100 config FB_SH_MOBILE_LCDC tristate "SuperH Mobile LCDC framebuffer support" - depends on FB && SUPERH + depends on FB && SUPERH && HAVE_CLK select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 8f24564f77b..98fb82f1161 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -42,11 +42,9 @@ struct sh_mobile_lcdc_chan { struct sh_mobile_lcdc_priv { void __iomem *base; int irq; -#ifdef CONFIG_HAVE_CLK atomic_t clk_usecnt; struct clk *dot_clk; struct clk *clk; -#endif unsigned long lddckr; struct sh_mobile_lcdc_chan ch[2]; int started; @@ -185,7 +183,6 @@ struct sh_mobile_lcdc_sys_bus_ops sh_mobile_lcdc_sys_bus_ops = { lcdc_sys_read_data, }; -#ifdef CONFIG_HAVE_CLK static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv) { if (atomic_inc_and_test(&priv->clk_usecnt)) { @@ -203,10 +200,6 @@ static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) clk_disable(priv->clk); } } -#else -static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv) {} -static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) {} -#endif static int sh_mobile_lcdc_sginit(struct fb_info *info, struct list_head *pagelist) @@ -515,7 +508,6 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) board_cfg = &ch->cfg.board_cfg; if (board_cfg->display_off) board_cfg->display_off(board_cfg->board_data); - } /* stop the lcdc */ @@ -574,9 +566,7 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev, int clock_source, struct sh_mobile_lcdc_priv *priv) { -#ifdef CONFIG_HAVE_CLK char clk_name[8]; -#endif char *str; int icksel; @@ -590,7 +580,6 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev, priv->lddckr = icksel << 16; -#ifdef CONFIG_HAVE_CLK atomic_set(&priv->clk_usecnt, -1); snprintf(clk_name, sizeof(clk_name), "lcdc%d", pdev->id); priv->clk = clk_get(&pdev->dev, clk_name); @@ -598,7 +587,7 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev, dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); return PTR_ERR(priv->clk); } - + if (str) { priv->dot_clk = clk_get(&pdev->dev, str); if (IS_ERR(priv->dot_clk)) { @@ -607,7 +596,6 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev, return PTR_ERR(priv->dot_clk); } } -#endif return 0; } @@ -942,11 +930,9 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev) framebuffer_release(info); } -#ifdef CONFIG_HAVE_CLK if (priv->dot_clk) clk_put(priv->dot_clk); clk_put(priv->clk); -#endif if (priv->base) iounmap(priv->base); diff --git a/include/linux/usb/m66592.h b/include/linux/usb/m66592.h new file mode 100644 index 00000000000..cda9625e7df --- /dev/null +++ b/include/linux/usb/m66592.h @@ -0,0 +1,44 @@ +/* + * M66592 driver platform data + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __LINUX_USB_M66592_H +#define __LINUX_USB_M66592_H + +#define M66592_PLATDATA_XTAL_12MHZ 0x01 +#define M66592_PLATDATA_XTAL_24MHZ 0x02 +#define M66592_PLATDATA_XTAL_48MHZ 0x03 + +struct m66592_platdata { + /* one = on chip controller, zero = external controller */ + unsigned on_chip:1; + + /* one = big endian, zero = little endian */ + unsigned endian:1; + + /* (external controller only) M66592_PLATDATA_XTAL_nnMHZ */ + unsigned xtal:2; + + /* (external controller only) one = 3.3V, zero = 1.5V */ + unsigned vif:1; + +}; + +#endif /* __LINUX_USB_M66592_H */ + diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h index e9f0384fa20..26d21673405 100644 --- a/include/linux/usb/r8a66597.h +++ b/include/linux/usb/r8a66597.h @@ -28,9 +28,12 @@ #define R8A66597_PLATDATA_XTAL_48MHZ 0x03 struct r8a66597_platdata { - /* This ops can controll port power instead of DVSTCTR register. */ + /* This callback can control port power instead of DVSTCTR register. */ void (*port_power)(int port, int power); + /* set one = on chip controller, set zero = external controller */ + unsigned on_chip:1; + /* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */ unsigned xtal:2; @@ -40,5 +43,373 @@ struct r8a66597_platdata { /* set one = big endian, set zero = little endian */ unsigned endian:1; }; -#endif + +/* Register definitions */ +#define SYSCFG0 0x00 +#define SYSCFG1 0x02 +#define SYSSTS0 0x04 +#define SYSSTS1 0x06 +#define DVSTCTR0 0x08 +#define DVSTCTR1 0x0A +#define TESTMODE 0x0C +#define PINCFG 0x0E +#define DMA0CFG 0x10 +#define DMA1CFG 0x12 +#define CFIFO 0x14 +#define D0FIFO 0x18 +#define D1FIFO 0x1C +#define CFIFOSEL 0x20 +#define CFIFOCTR 0x22 +#define CFIFOSIE 0x24 +#define D0FIFOSEL 0x28 +#define D0FIFOCTR 0x2A +#define D1FIFOSEL 0x2C +#define D1FIFOCTR 0x2E +#define INTENB0 0x30 +#define INTENB1 0x32 +#define INTENB2 0x34 +#define BRDYENB 0x36 +#define NRDYENB 0x38 +#define BEMPENB 0x3A +#define SOFCFG 0x3C +#define INTSTS0 0x40 +#define INTSTS1 0x42 +#define INTSTS2 0x44 +#define BRDYSTS 0x46 +#define NRDYSTS 0x48 +#define BEMPSTS 0x4A +#define FRMNUM 0x4C +#define UFRMNUM 0x4E +#define USBADDR 0x50 +#define USBREQ 0x54 +#define USBVAL 0x56 +#define USBINDX 0x58 +#define USBLENG 0x5A +#define DCPCFG 0x5C +#define DCPMAXP 0x5E +#define DCPCTR 0x60 +#define PIPESEL 0x64 +#define PIPECFG 0x68 +#define PIPEBUF 0x6A +#define PIPEMAXP 0x6C +#define PIPEPERI 0x6E +#define PIPE1CTR 0x70 +#define PIPE2CTR 0x72 +#define PIPE3CTR 0x74 +#define PIPE4CTR 0x76 +#define PIPE5CTR 0x78 +#define PIPE6CTR 0x7A +#define PIPE7CTR 0x7C +#define PIPE8CTR 0x7E +#define PIPE9CTR 0x80 +#define PIPE1TRE 0x90 +#define PIPE1TRN 0x92 +#define PIPE2TRE 0x94 +#define PIPE2TRN 0x96 +#define PIPE3TRE 0x98 +#define PIPE3TRN 0x9A +#define PIPE4TRE 0x9C +#define PIPE4TRN 0x9E +#define PIPE5TRE 0xA0 +#define PIPE5TRN 0xA2 +#define DEVADD0 0xD0 +#define DEVADD1 0xD2 +#define DEVADD2 0xD4 +#define DEVADD3 0xD6 +#define DEVADD4 0xD8 +#define DEVADD5 0xDA +#define DEVADD6 0xDC +#define DEVADD7 0xDE +#define DEVADD8 0xE0 +#define DEVADD9 0xE2 +#define DEVADDA 0xE4 + +/* System Configuration Control Register */ +#define XTAL 0xC000 /* b15-14: Crystal selection */ +#define XTAL48 0x8000 /* 48MHz */ +#define XTAL24 0x4000 /* 24MHz */ +#define XTAL12 0x0000 /* 12MHz */ +#define XCKE 0x2000 /* b13: External clock enable */ +#define PLLC 0x0800 /* b11: PLL control */ +#define SCKE 0x0400 /* b10: USB clock enable */ +#define PCSDIS 0x0200 /* b9: not CS wakeup */ +#define LPSME 0x0100 /* b8: Low power sleep mode */ +#define HSE 0x0080 /* b7: Hi-speed enable */ +#define DCFM 0x0040 /* b6: Controller function select */ +#define DRPD 0x0020 /* b5: D+/- pull down control */ +#define DPRPU 0x0010 /* b4: D+ pull up control */ +#define USBE 0x0001 /* b0: USB module operation enable */ + +/* System Configuration Status Register */ +#define OVCBIT 0x8000 /* b15-14: Over-current bit */ +#define OVCMON 0xC000 /* b15-14: Over-current monitor */ +#define SOFEA 0x0020 /* b5: SOF monitor */ +#define IDMON 0x0004 /* b3: ID-pin monitor */ +#define LNST 0x0003 /* b1-0: D+, D- line status */ +#define SE1 0x0003 /* SE1 */ +#define FS_KSTS 0x0002 /* Full-Speed K State */ +#define FS_JSTS 0x0001 /* Full-Speed J State */ +#define LS_JSTS 0x0002 /* Low-Speed J State */ +#define LS_KSTS 0x0001 /* Low-Speed K State */ +#define SE0 0x0000 /* SE0 */ + +/* Device State Control Register */ +#define EXTLP0 0x0400 /* b10: External port */ +#define VBOUT 0x0200 /* b9: VBUS output */ +#define WKUP 0x0100 /* b8: Remote wakeup */ +#define RWUPE 0x0080 /* b7: Remote wakeup sense */ +#define USBRST 0x0040 /* b6: USB reset enable */ +#define RESUME 0x0020 /* b5: Resume enable */ +#define UACT 0x0010 /* b4: USB bus enable */ +#define RHST 0x0007 /* b1-0: Reset handshake status */ +#define HSPROC 0x0004 /* HS handshake is processing */ +#define HSMODE 0x0003 /* Hi-Speed mode */ +#define FSMODE 0x0002 /* Full-Speed mode */ +#define LSMODE 0x0001 /* Low-Speed mode */ +#define UNDECID 0x0000 /* Undecided */ + +/* Test Mode Register */ +#define UTST 0x000F /* b3-0: Test select */ +#define H_TST_PACKET 0x000C /* HOST TEST Packet */ +#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */ +#define H_TST_K 0x000A /* HOST TEST K */ +#define H_TST_J 0x0009 /* HOST TEST J */ +#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */ +#define P_TST_PACKET 0x0004 /* PERI TEST Packet */ +#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */ +#define P_TST_K 0x0002 /* PERI TEST K */ +#define P_TST_J 0x0001 /* PERI TEST J */ +#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */ + +/* Data Pin Configuration Register */ +#define LDRV 0x8000 /* b15: Drive Current Adjust */ +#define VIF1 0x0000 /* VIF = 1.8V */ +#define VIF3 0x8000 /* VIF = 3.3V */ +#define INTA 0x0001 /* b1: USB INT-pin active */ + +/* DMAx Pin Configuration Register */ +#define DREQA 0x4000 /* b14: Dreq active select */ +#define BURST 0x2000 /* b13: Burst mode */ +#define DACKA 0x0400 /* b10: Dack active select */ +#define DFORM 0x0380 /* b9-7: DMA mode select */ +#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */ +#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */ +#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */ +#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */ +#define DENDA 0x0040 /* b6: Dend active select */ +#define PKTM 0x0020 /* b5: Packet mode */ +#define DENDE 0x0010 /* b4: Dend enable */ +#define OBUS 0x0004 /* b2: OUTbus mode */ + +/* CFIFO/DxFIFO Port Select Register */ +#define RCNT 0x8000 /* b15: Read count mode */ +#define REW 0x4000 /* b14: Buffer rewind */ +#define DCLRM 0x2000 /* b13: DMA buffer clear mode */ +#define DREQE 0x1000 /* b12: DREQ output enable */ +#define MBW_8 0x0000 /* 8bit */ +#define MBW_16 0x0400 /* 16bit */ +#define MBW_32 0x0800 /* 32bit */ +#define BIGEND 0x0100 /* b8: Big endian mode */ +#define BYTE_LITTLE 0x0000 /* little dendian */ +#define BYTE_BIG 0x0100 /* big endifan */ +#define ISEL 0x0020 /* b5: DCP FIFO port direction select */ +#define CURPIPE 0x000F /* b2-0: PIPE select */ + +/* CFIFO/DxFIFO Port Control Register */ +#define BVAL 0x8000 /* b15: Buffer valid flag */ +#define BCLR 0x4000 /* b14: Buffer clear */ +#define FRDY 0x2000 /* b13: FIFO ready */ +#define DTLN 0x0FFF /* b11-0: FIFO received data length */ + +/* Interrupt Enable Register 0 */ +#define VBSE 0x8000 /* b15: VBUS interrupt */ +#define RSME 0x4000 /* b14: Resume interrupt */ +#define SOFE 0x2000 /* b13: Frame update interrupt */ +#define DVSE 0x1000 /* b12: Device state transition interrupt */ +#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */ +#define BEMPE 0x0400 /* b10: Buffer empty interrupt */ +#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */ +#define BRDYE 0x0100 /* b8: Buffer ready interrupt */ + +/* Interrupt Enable Register 1 */ +#define OVRCRE 0x8000 /* b15: Over-current interrupt */ +#define BCHGE 0x4000 /* b14: USB us chenge interrupt */ +#define DTCHE 0x1000 /* b12: Detach sense interrupt */ +#define ATTCHE 0x0800 /* b11: Attach sense interrupt */ +#define EOFERRE 0x0040 /* b6: EOF error interrupt */ +#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */ +#define SACKE 0x0010 /* b4: SETUP ACK interrupt */ + +/* BRDY Interrupt Enable/Status Register */ +#define BRDY9 0x0200 /* b9: PIPE9 */ +#define BRDY8 0x0100 /* b8: PIPE8 */ +#define BRDY7 0x0080 /* b7: PIPE7 */ +#define BRDY6 0x0040 /* b6: PIPE6 */ +#define BRDY5 0x0020 /* b5: PIPE5 */ +#define BRDY4 0x0010 /* b4: PIPE4 */ +#define BRDY3 0x0008 /* b3: PIPE3 */ +#define BRDY2 0x0004 /* b2: PIPE2 */ +#define BRDY1 0x0002 /* b1: PIPE1 */ +#define BRDY0 0x0001 /* b1: PIPE0 */ + +/* NRDY Interrupt Enable/Status Register */ +#define NRDY9 0x0200 /* b9: PIPE9 */ +#define NRDY8 0x0100 /* b8: PIPE8 */ +#define NRDY7 0x0080 /* b7: PIPE7 */ +#define NRDY6 0x0040 /* b6: PIPE6 */ +#define NRDY5 0x0020 /* b5: PIPE5 */ +#define NRDY4 0x0010 /* b4: PIPE4 */ +#define NRDY3 0x0008 /* b3: PIPE3 */ +#define NRDY2 0x0004 /* b2: PIPE2 */ +#define NRDY1 0x0002 /* b1: PIPE1 */ +#define NRDY0 0x0001 /* b1: PIPE0 */ + +/* BEMP Interrupt Enable/Status Register */ +#define BEMP9 0x0200 /* b9: PIPE9 */ +#define BEMP8 0x0100 /* b8: PIPE8 */ +#define BEMP7 0x0080 /* b7: PIPE7 */ +#define BEMP6 0x0040 /* b6: PIPE6 */ +#define BEMP5 0x0020 /* b5: PIPE5 */ +#define BEMP4 0x0010 /* b4: PIPE4 */ +#define BEMP3 0x0008 /* b3: PIPE3 */ +#define BEMP2 0x0004 /* b2: PIPE2 */ +#define BEMP1 0x0002 /* b1: PIPE1 */ +#define BEMP0 0x0001 /* b0: PIPE0 */ + +/* SOF Pin Configuration Register */ +#define TRNENSEL 0x0100 /* b8: Select transaction enable period */ +#define BRDYM 0x0040 /* b6: BRDY clear timing */ +#define INTL 0x0020 /* b5: Interrupt sense select */ +#define EDGESTS 0x0010 /* b4: */ +#define SOFMODE 0x000C /* b3-2: SOF pin select */ +#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */ +#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */ +#define SOF_DISABLE 0x0000 /* SOF OUT Disable */ + +/* Interrupt Status Register 0 */ +#define VBINT 0x8000 /* b15: VBUS interrupt */ +#define RESM 0x4000 /* b14: Resume interrupt */ +#define SOFR 0x2000 /* b13: SOF frame update interrupt */ +#define DVST 0x1000 /* b12: Device state transition interrupt */ +#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */ +#define BEMP 0x0400 /* b10: Buffer empty interrupt */ +#define NRDY 0x0200 /* b9: Buffer not ready interrupt */ +#define BRDY 0x0100 /* b8: Buffer ready interrupt */ +#define VBSTS 0x0080 /* b7: VBUS input port */ +#define DVSQ 0x0070 /* b6-4: Device state */ +#define DS_SPD_CNFG 0x0070 /* Suspend Configured */ +#define DS_SPD_ADDR 0x0060 /* Suspend Address */ +#define DS_SPD_DFLT 0x0050 /* Suspend Default */ +#define DS_SPD_POWR 0x0040 /* Suspend Powered */ +#define DS_SUSP 0x0040 /* Suspend */ +#define DS_CNFG 0x0030 /* Configured */ +#define DS_ADDS 0x0020 /* Address */ +#define DS_DFLT 0x0010 /* Default */ +#define DS_POWR 0x0000 /* Powered */ +#define DVSQS 0x0030 /* b5-4: Device state */ +#define VALID 0x0008 /* b3: Setup packet detected flag */ +#define CTSQ 0x0007 /* b2-0: Control transfer stage */ +#define CS_SQER 0x0006 /* Sequence error */ +#define CS_WRND 0x0005 /* Control write nodata status stage */ +#define CS_WRSS 0x0004 /* Control write status stage */ +#define CS_WRDS 0x0003 /* Control write data stage */ +#define CS_RDSS 0x0002 /* Control read status stage */ +#define CS_RDDS 0x0001 /* Control read data stage */ +#define CS_IDST 0x0000 /* Idle or setup stage */ + +/* Interrupt Status Register 1 */ +#define OVRCR 0x8000 /* b15: Over-current interrupt */ +#define BCHG 0x4000 /* b14: USB bus chenge interrupt */ +#define DTCH 0x1000 /* b12: Detach sense interrupt */ +#define ATTCH 0x0800 /* b11: Attach sense interrupt */ +#define EOFERR 0x0040 /* b6: EOF-error interrupt */ +#define SIGN 0x0020 /* b5: Setup ignore interrupt */ +#define SACK 0x0010 /* b4: Setup acknowledge interrupt */ + +/* Frame Number Register */ +#define OVRN 0x8000 /* b15: Overrun error */ +#define CRCE 0x4000 /* b14: Received data error */ +#define FRNM 0x07FF /* b10-0: Frame number */ + +/* Micro Frame Number Register */ +#define UFRNM 0x0007 /* b2-0: Micro frame number */ + +/* Default Control Pipe Maxpacket Size Register */ +/* Pipe Maxpacket Size Register */ +#define DEVSEL 0xF000 /* b15-14: Device address select */ +#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */ + +/* Default Control Pipe Control Register */ +#define BSTS 0x8000 /* b15: Buffer status */ +#define SUREQ 0x4000 /* b14: Send USB request */ +#define CSCLR 0x2000 /* b13: complete-split status clear */ +#define CSSTS 0x1000 /* b12: complete-split status */ +#define SUREQCLR 0x0800 /* b11: stop setup request */ +#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ +#define SQSET 0x0080 /* b7: Sequence toggle bit set */ +#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ +#define PBUSY 0x0020 /* b5: pipe busy */ +#define PINGE 0x0010 /* b4: ping enable */ +#define CCPL 0x0004 /* b2: Enable control transfer complete */ +#define PID 0x0003 /* b1-0: Response PID */ +#define PID_STALL11 0x0003 /* STALL */ +#define PID_STALL 0x0002 /* STALL */ +#define PID_BUF 0x0001 /* BUF */ +#define PID_NAK 0x0000 /* NAK */ + +/* Pipe Window Select Register */ +#define PIPENM 0x0007 /* b2-0: Pipe select */ + +/* Pipe Configuration Register */ +#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */ +#define R8A66597_ISO 0xC000 /* Isochronous */ +#define R8A66597_INT 0x8000 /* Interrupt */ +#define R8A66597_BULK 0x4000 /* Bulk */ +#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */ +#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */ +#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */ +#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */ +#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */ +#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */ + +/* Pipe Buffer Configuration Register */ +#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */ +#define BUFNMB 0x007F /* b6-0: Pipe buffer number */ +#define PIPE0BUF 256 +#define PIPExBUF 64 + +/* Pipe Maxpacket Size Register */ +#define MXPS 0x07FF /* b10-0: Maxpacket size */ + +/* Pipe Cycle Configuration Register */ +#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */ +#define IITV 0x0007 /* b2-0: Isochronous interval */ + +/* Pipex Control Register */ +#define BSTS 0x8000 /* b15: Buffer status */ +#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */ +#define CSCLR 0x2000 /* b13: complete-split status clear */ +#define CSSTS 0x1000 /* b12: complete-split status */ +#define ATREPM 0x0400 /* b10: Auto repeat mode */ +#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */ +#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ +#define SQSET 0x0080 /* b7: Sequence toggle bit set */ +#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ +#define PBUSY 0x0020 /* b5: pipe busy */ +#define PID 0x0003 /* b1-0: Response PID */ + +/* PIPExTRE */ +#define TRENB 0x0200 /* b9: Transaction counter enable */ +#define TRCLR 0x0100 /* b8: Transaction counter clear */ + +/* PIPExTRN */ +#define TRNCNT 0xFFFF /* b15-0: Transaction counter */ + +/* DEVADDx */ +#define UPPHUB 0x7800 +#define HUBPORT 0x0700 +#define USBSPD 0x00C0 +#define RTPORT 0x0001 + +#endif /* __LINUX_USB_R8A66597_H */ |