diff options
255 files changed, 18310 insertions, 4878 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index fd7620f025f..9541171f122 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -5,9 +5,12 @@ config MIPS select HAVE_IDE select HAVE_OPROFILE select HAVE_ARCH_KGDB - # Horrible source of confusion. Die, die, die ... - select EMBEDDED - select RTC_LIB if !LEMOTE_FULOONG2E + select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_TRACE_MCOUNT_TEST + select HAVE_DYNAMIC_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_FUNCTION_GRAPH_TRACER + select RTC_LIB if !MACH_LOONGSON mainmenu "Linux/MIPS Kernel Configuration" @@ -22,6 +25,7 @@ choice config MACH_ALCHEMY bool "Alchemy processor based machines" + select SYS_SUPPORTS_ZBOOT config AR7 bool "Texas Instruments AR7" @@ -36,6 +40,7 @@ config AR7 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_ZBOOT_UART16550 select GENERIC_GPIO select GCD select VLYNQ @@ -43,23 +48,6 @@ config AR7 Support for the Texas Instruments AR7 System-on-a-Chip family: TNETD7100, 7200 and 7300. -config BASLER_EXCITE - bool "Basler eXcite smart camera" - select CEVT_R4K - select CSRC_R4K - select DMA_COHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select IRQ_CPU_RM9K - select MIPS_RM9122 - select SYS_HAS_CPU_RM9000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - help - The eXcite is a smart camera platform manufactured by - Basler Vision Technologies AG. - config BCM47XX bool "BCM47XX based boards" select CEVT_R4K @@ -192,6 +180,7 @@ config LASAT config MACH_LOONGSON bool "Loongson family of machines" + select SYS_SUPPORTS_ZBOOT_UART16550 help This enables the support of Loongson family of machines. @@ -233,6 +222,7 @@ config MIPS_MALTA select SYS_SUPPORTS_MIPS_CMP select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS + select SYS_SUPPORTS_ZBOOT help This enables support for the MIPS Technologies Malta evaluation board. @@ -334,6 +324,24 @@ config PMC_YOSEMITE Yosemite is an evaluation board for the RM9000x2 processor manufactured by PMC-Sierra. +config POWERTV + bool "Cisco PowerTV" + select BOOT_ELF32 + select CEVT_R4K + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI + select CSRC_POWERTV + select DMA_NONCOHERENT + select HW_HAS_PCI + select SYS_HAS_EARLY_PRINTK + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select USB_OHCI_LITTLE_ENDIAN + help + This enables support for the Cisco PowerTV Platform. + config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" select ARC @@ -674,11 +682,11 @@ config CAVIUM_OCTEON_REFERENCE_BOARD endchoice source "arch/mips/alchemy/Kconfig" -source "arch/mips/basler/excite/Kconfig" source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" +source "arch/mips/powertv/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" source "arch/mips/txx9/Kconfig" @@ -778,6 +786,9 @@ config CSRC_BCM1480 config CSRC_IOASIC bool +config CSRC_POWERTV + bool + config CSRC_R4K_LIB bool @@ -806,20 +817,6 @@ config DMA_NONCOHERENT config DMA_NEED_PCI_MAP_STATE bool -config EARLY_PRINTK - bool "Early printk" if EMBEDDED && DEBUG_KERNEL - depends on SYS_HAS_EARLY_PRINTK - default y - help - This option enables special console drivers which allow the kernel - to print messages very early in the bootup process. - - This is useful for kernel debugging when your machine crashes very - early before the console code is initialized. For normal operation, - it is not recommended because it looks ugly on some machines and - doesn't cooperate with an X server. You should normally say N here, - unless you want to debug such a crash. - config SYS_HAS_EARLY_PRINTK bool @@ -1069,6 +1066,21 @@ config CPU_LOONGSON2E The Loongson 2E processor implements the MIPS III instruction set with many extensions. + It has an internal FPGA northbridge, which is compatiable to + bonito64. + +config CPU_LOONGSON2F + bool "Loongson 2F" + depends on SYS_HAS_CPU_LOONGSON2F + select CPU_LOONGSON2 + help + The Loongson 2F processor implements the MIPS III instruction set + with many extensions. + + Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller + have a similar programming interface with FPGA northbridge used in + Loongson2E. + config CPU_MIPS32_R1 bool "MIPS32 Release 1" depends on SYS_HAS_CPU_MIPS32_R1 @@ -1294,6 +1306,16 @@ config CPU_CAVIUM_OCTEON endchoice +config SYS_SUPPORTS_ZBOOT + bool + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA + +config SYS_SUPPORTS_ZBOOT_UART16550 + bool + select SYS_SUPPORTS_ZBOOT + config CPU_LOONGSON2 bool select CPU_SUPPORTS_32BIT_KERNEL @@ -1303,6 +1325,12 @@ config CPU_LOONGSON2 config SYS_HAS_CPU_LOONGSON2E bool +config SYS_HAS_CPU_LOONGSON2F + bool + select CPU_SUPPORTS_CPUFREQ + select CPU_SUPPORTS_ADDRWINCFG if 64BIT + select CPU_SUPPORTS_UNCACHED_ACCELERATED + config SYS_HAS_CPU_MIPS32_R1 bool @@ -1411,8 +1439,17 @@ config CPU_SUPPORTS_32BIT_KERNEL bool config CPU_SUPPORTS_64BIT_KERNEL bool +config CPU_SUPPORTS_CPUFREQ + bool +config CPU_SUPPORTS_ADDRWINCFG + bool config CPU_SUPPORTS_HUGEPAGES bool +config CPU_SUPPORTS_UNCACHED_ACCELERATED + bool +config MIPS_PGD_C0_CONTEXT + bool + default y if 64BIT && CPU_MIPSR2 # # Set to y for ptrace access to watch registers. @@ -2024,15 +2061,6 @@ config STACKTRACE_SUPPORT source "init/Kconfig" -config PROBE_INITRD_HEADER - bool "Probe initrd header created by addinitrd" - depends on BLK_DEV_INITRD - help - Probe initrd header at the last page of kernel image. - Say Y here if you are using arch/mips/boot/addinitrd.c to - add initrd or initramfs image to the kernel image. - Otherwise, say N. - source "kernel/Kconfig.freezer" menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" @@ -2104,6 +2132,7 @@ config MMU config I8253 bool + select MIPS_EXTERNAL_TIMER config ZONE_DMA32 bool @@ -2180,6 +2209,8 @@ source "kernel/power/Kconfig" endmenu +source "arch/mips/kernel/cpufreq/Kconfig" + source "net/Kconfig" source "drivers/Kconfig" diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 364ca893880..d2b88a0be51 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -6,15 +6,66 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" +config EARLY_PRINTK + bool "Early printk" if EMBEDDED + depends on SYS_HAS_EARLY_PRINTK + default y + help + This option enables special console drivers which allow the kernel + to print messages very early in the bootup process. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation, + it is not recommended because it looks ugly on some machines and + doesn't cooperate with an X server. You should normally say N here, + unless you want to debug such a crash. + +config CMDLINE_BOOL + bool "Built-in kernel command line" + default n + help + For most systems, it is firmware or second stage bootloader that + by default specifies the kernel command line options. However, + it might be necessary or advantageous to either override the + default kernel command line or add a few extra options to it. + For such cases, this option allows you to hardcode your own + command line options directly into the kernel. For that, you + should choose 'Y' here, and fill in the extra boot arguments + in CONFIG_CMDLINE. + + The built-in options will be concatenated to the default command + line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default + command line will be ignored and replaced by the built-in string. + + Most MIPS systems will normally expect 'N' here and rely upon + the command line from the firmware or the second-stage bootloader. + config CMDLINE string "Default kernel command string" + depends on CMDLINE_BOOL default "" help On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, you can supply - some command-line options at build time by entering them here. In - other cases you can specify kernel args so that you don't have - to set them up in board prom initialization routines. + pass arguments to the kernel. For these platforms, and for the cases + when you want to add some extra options to the command line or ignore + the default command line, you can supply some command-line options at + build time by entering them here. In other cases you can specify + kernel args so that you don't have to set them up in board prom + initialization routines. + + For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE + options. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides firware arguments" + default n + depends on CMDLINE_BOOL + help + By setting this option to 'Y' you will have your kernel ignore + command line arguments from firmware or second stage bootloader. + Instead, the built-in command line will be used exclusively. + + Normally, you will choose 'N' here. config DEBUG_STACK_USAGE bool "Enable stack utilization instrumentation" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 77f5021218d..1893efd43fc 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -48,7 +48,16 @@ ifneq ($(SUBARCH),$(ARCH)) endif endif +ifndef CONFIG_FUNCTION_TRACER cflags-y := -ffunction-sections +endif +ifdef CONFIG_FUNCTION_GRAPH_TRACER + ifndef KBUILD_MCOUNT_RA_ADDRESS + ifeq ($(call cc-option-yn,-mmcount-ra-address), y) + cflags-y += -mmcount-ra-address -DKBUILD_MCOUNT_RA_ADDRESS + endif + endif +endif cflags-y += $(call cc-option, -mno-check-zero-division) ifdef CONFIG_32BIT @@ -69,6 +78,7 @@ endif all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32) all-$(CONFIG_BOOT_ELF64) := $(vmlinux-64) +all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz # # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel @@ -124,6 +134,8 @@ cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap cflags-$(CONFIG_CPU_LOONGSON2E) += \ $(call cc-option,-march=loongson2e,-march=r4600) +cflags-$(CONFIG_CPU_LOONGSON2F) += \ + $(call cc-option,-march=loongson2f,-march=r4600) cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap @@ -324,6 +336,7 @@ core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/ cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \ -mno-branch-likely load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000 +load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000 # # MIPS Malta board @@ -331,7 +344,7 @@ load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000 core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/ cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 -all-$(CONFIG_MIPS_MALTA) := vmlinux.bin +all-$(CONFIG_MIPS_MALTA) := vmlinuz.bin # # MIPS SIM @@ -356,13 +369,6 @@ cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemit load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000 # -# Basler eXcite -# -core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/ -cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite -load-$(CONFIG_BASLER_EXCITE) += 0x80100000 - -# # LASAT platforms # core-$(CONFIG_LASAT) += arch/mips/lasat/ @@ -441,6 +447,13 @@ core-$(CONFIG_NEC_MARKEINS) += arch/mips/emma/markeins/ load-$(CONFIG_NEC_MARKEINS) += 0xffffffff88100000 # +# Cisco PowerTV Platform +# +core-$(CONFIG_POWERTV) += arch/mips/powertv/ +cflags-$(CONFIG_POWERTV) += -I$(srctree)/arch/mips/include/asm/mach-powertv +load-$(CONFIG_POWERTV) += 0xffffffff90800000 + +# # SGI IP22 (Indy/Indigo2) # # Set the load address to >= 0xffffffff88069000 if you want to leave space for @@ -581,7 +594,7 @@ load-$(CONFIG_SNI_RM) += 0xffffffff80600000 else load-$(CONFIG_SNI_RM) += 0xffffffff80030000 endif -all-$(CONFIG_SNI_RM) := vmlinux.ecoff +all-$(CONFIG_SNI_RM) := vmlinuz.ecoff # # Common TXx9 @@ -699,9 +712,23 @@ vmlinux.64: vmlinux $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@ makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1) +makezboot =$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \ + VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $(1) all: $(all-y) +vmlinuz: vmlinux FORCE + +@$(call makezboot,$@) + +vmlinuz.bin: vmlinux + +@$(call makezboot,$@) + +vmlinuz.ecoff: vmlinux + +@$(call makezboot,$@) + +vmlinuz.srec: vmlinux + +@$(call makezboot,$@) + vmlinux.bin: $(vmlinux-32) +@$(call makeboot,$@) @@ -726,11 +753,13 @@ endif install: $(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE) + $(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE) $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE) $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE) archclean: @$(MAKE) $(clean)=arch/mips/boot + @$(MAKE) $(clean)=arch/mips/boot/compressed @$(MAKE) $(clean)=arch/mips/lasat define archhelp @@ -738,10 +767,18 @@ define archhelp echo ' vmlinux.ecoff - ECOFF boot image' echo ' vmlinux.bin - Raw binary boot image' echo ' vmlinux.srec - SREC boot image' + echo ' vmlinuz - Compressed boot(zboot) image' + echo ' vmlinuz.ecoff - ECOFF zboot image' + echo ' vmlinuz.bin - Raw binary zboot image' + echo ' vmlinuz.srec - SREC zboot image' echo echo ' These will be default as apropriate for a configured platform.' endef CLEAN_FILES += vmlinux.32 \ vmlinux.64 \ - vmlinux.ecoff + vmlinux.ecoff \ + vmlinuz \ + vmlinuz.ecoff \ + vmlinuz.bin \ + vmlinuz.srec diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 835f3f0319c..85169c08d8d 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -505,7 +505,7 @@ static int __init ar7_register_devices(void) int res; u32 *bootcr, val; #ifdef CONFIG_SERIAL_8250 - static struct uart_port uart_port[2]; + static struct uart_port uart_port[2] __initdata; memset(uart_port, 0, sizeof(struct uart_port) * 2); diff --git a/arch/mips/basler/excite/Kconfig b/arch/mips/basler/excite/Kconfig deleted file mode 100644 index ba506075608..00000000000 --- a/arch/mips/basler/excite/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -config BASLER_EXCITE_PROTOTYPE - bool "Support for pre-release units" - depends on BASLER_EXCITE - default n - help - Pre-series (prototype) units are different from later ones in - some ways. Select this option if you have one of these. Please - note that a kernel built with this option selected will not be - able to run on normal units. diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile deleted file mode 100644 index cff29cf46d0..00000000000 --- a/arch/mips/basler/excite/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for Basler eXcite -# - -obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \ - excite_device.o excite_procfs.o - -obj-m += excite_iodev.o diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c deleted file mode 100644 index e00bc2d7f30..00000000000 --- a/arch/mips/basler/excite/excite_device.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ioport.h> -#include <linux/err.h> -#include <linux/jiffies.h> -#include <linux/sched.h> -#include <asm/types.h> -#include <asm/rm9k-ocd.h> - -#include <excite.h> -#include <rm9k_eth.h> -#include <rm9k_wdt.h> -#include <rm9k_xicap.h> -#include <excite_nandflash.h> - -#include "excite_iodev.h" - -#define RM9K_GE_UNIT 0 -#define XICAP_UNIT 0 -#define NAND_UNIT 0 - -#define DLL_TIMEOUT 3 /* seconds */ - - -#define RINIT(__start__, __end__, __name__, __parent__) { \ - .name = __name__ "_0", \ - .start = (__start__), \ - .end = (__end__), \ - .flags = 0, \ - .parent = (__parent__) \ -} - -#define RINIT_IRQ(__irq__, __name__) { \ - .name = __name__ "_0", \ - .start = (__irq__), \ - .end = (__irq__), \ - .flags = IORESOURCE_IRQ, \ - .parent = NULL \ -} - - - -enum { - slice_xicap, - slice_eth -}; - - - -static struct resource - excite_ctr_resource __maybe_unused = { - .name = "GPI counters", - .start = 0, - .end = 5, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_gpislice_resource __maybe_unused = { - .name = "GPI slices", - .start = 0, - .end = 1, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_mdio_channel_resource __maybe_unused = { - .name = "MDIO channels", - .start = 0, - .end = 1, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_fifomem_resource __maybe_unused = { - .name = "FIFO memory", - .start = 0, - .end = 767, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_scram_resource __maybe_unused = { - .name = "Scratch RAM", - .start = EXCITE_PHYS_SCRAM, - .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_fpga_resource __maybe_unused = { - .name = "System FPGA", - .start = EXCITE_PHYS_FPGA, - .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_nand_resource __maybe_unused = { - .name = "NAND flash control", - .start = EXCITE_PHYS_NAND, - .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_titan_resource __maybe_unused = { - .name = "TITAN registers", - .start = EXCITE_PHYS_TITAN, - .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }; - - - -static void adjust_resources(struct resource *res, unsigned int n) -{ - struct resource *p; - const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA; - - for (p = res; p < res + n; p++) { - const struct resource * const parent = p->parent; - if (parent) { - p->start += parent->start; - p->end += parent->start; - p->flags = parent->flags & mask; - } - } -} - - - -#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) -static struct resource xicap_rsrc[] = { - RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource), - RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource), - RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource), - RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource), - RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource), - RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource), - RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource), - RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource), - RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ) -}; - -static struct platform_device xicap_pdev = { - .name = XICAP_NAME, - .id = XICAP_UNIT, - .num_resources = ARRAY_SIZE(xicap_rsrc), - .resource = xicap_rsrc -}; - -/* - * Create a platform device for the GPI port that receives the - * image data from the embedded camera. - */ -static int __init xicap_devinit(void) -{ - unsigned long tend; - u32 reg; - int retval; - - adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc)); - - /* Power up the slice and configure it. */ - reg = titan_readl(CPTC1R); - reg &= ~(0x11100 << slice_xicap); - titan_writel(reg, CPTC1R); - - /* Enable slice & DLL. */ - reg= titan_readl(CPRR); - reg &= ~(0x00030003 << (slice_xicap * 2)); - titan_writel(reg, CPRR); - - /* Wait for DLLs to lock */ - tend = jiffies + DLL_TIMEOUT * HZ; - while (time_before(jiffies, tend)) { - if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4)))) - break; - yield(); - } - - if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) { - printk(KERN_ERR "%s: DLL not locked after %u seconds\n", - xicap_pdev.name, DLL_TIMEOUT); - retval = -ETIME; - } else { - /* Register platform device */ - retval = platform_device_register(&xicap_pdev); - } - - return retval; -} - -device_initcall(xicap_devinit); -#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */ - - - -#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) -static struct resource wdt_rsrc[] = { - RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource), - RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource), - RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ) -}; - -static struct platform_device wdt_pdev = { - .name = WDT_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(wdt_rsrc), - .resource = wdt_rsrc -}; - -/* - * Create a platform device for the GPI port that receives the - * image data from the embedded camera. - */ -static int __init wdt_devinit(void) -{ - adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc)); - return platform_device_register(&wdt_pdev); -} - -device_initcall(wdt_devinit); -#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */ - - - -static struct resource excite_nandflash_rsrc[] = { - RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource) -}; - -static struct platform_device excite_nandflash_pdev = { - .name = "excite_nand", - .id = NAND_UNIT, - .num_resources = ARRAY_SIZE(excite_nandflash_rsrc), - .resource = excite_nandflash_rsrc -}; - -/* - * Create a platform device for the access to the nand-flash - * port - */ -static int __init excite_nandflash_devinit(void) -{ - adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc)); - - /* nothing to be done here */ - - /* Register platform device */ - return platform_device_register(&excite_nandflash_pdev); -} - -device_initcall(excite_nandflash_devinit); - - - -static struct resource iodev_rsrc[] = { - RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ) -}; - -static struct platform_device io_pdev = { - .name = IODEV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(iodev_rsrc), - .resource = iodev_rsrc -}; - -/* - * Create a platform device for the external I/O ports. - */ -static int __init io_devinit(void) -{ - adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc)); - return platform_device_register(&io_pdev); -} - -device_initcall(io_devinit); - - - - -#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) -static struct resource rm9k_ge_rsrc[] = { - RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource), - RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource), - RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource), - RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource), - RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource), - RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource), - RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource), - RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource), - RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource), - RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource), - RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource), - RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource), - RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource), - RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN), - RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY) -}; - -static struct platform_device rm9k_ge_pdev = { - .name = RM9K_GE_NAME, - .id = RM9K_GE_UNIT, - .num_resources = ARRAY_SIZE(rm9k_ge_rsrc), - .resource = rm9k_ge_rsrc -}; - - - -/* - * Create a platform device for the Ethernet port. - */ -static int __init rm9k_ge_devinit(void) -{ - u32 reg; - - adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc)); - - /* Power up the slice and configure it. */ - reg = titan_readl(CPTC1R); - reg &= ~(0x11000 << slice_eth); - reg |= 0x100 << slice_eth; - titan_writel(reg, CPTC1R); - - /* Take the MAC out of reset, reset the DLLs. */ - reg = titan_readl(CPRR); - reg &= ~(0x00030000 << (slice_eth * 2)); - reg |= 0x3 << (slice_eth * 2); - titan_writel(reg, CPRR); - - return platform_device_register(&rm9k_ge_pdev); -} - -device_initcall(rm9k_ge_devinit); -#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */ - - - -static int __init excite_setup_devs(void) -{ - int res; - u32 reg; - - /* Enable xdma and fifo interrupts */ - reg = titan_readl(0x0050); - titan_writel(reg | 0x18000000, 0x0050); - - res = request_resource(&iomem_resource, &excite_titan_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_scram_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_fpga_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_nand_resource); - if (res) - return res; - excite_fpga_resource.flags = excite_fpga_resource.parent->flags & - ( IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA); - excite_nand_resource.flags = excite_nand_resource.parent->flags & - ( IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA); - - return 0; -} - -arch_initcall(excite_setup_devs); - diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c deleted file mode 100644 index 938b1d0b765..00000000000 --- a/arch/mips/basler/excite/excite_iodev.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Copyright (C) 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/compiler.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/wait.h> -#include <linux/poll.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/miscdevice.h> -#include <linux/smp_lock.h> - -#include "excite_iodev.h" - - - -static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int); -static int __init iodev_probe(struct platform_device *); -static int __exit iodev_remove(struct platform_device *); -static int iodev_open(struct inode *, struct file *); -static int iodev_release(struct inode *, struct file *); -static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *); -static unsigned int iodev_poll(struct file *, struct poll_table_struct *); -static irqreturn_t iodev_irqhdl(int, void *); - - - -static const char iodev_name[] = "iodev"; -static unsigned int iodev_irq; -static DECLARE_WAIT_QUEUE_HEAD(wq); - - - -static const struct file_operations fops = -{ - .owner = THIS_MODULE, - .open = iodev_open, - .release = iodev_release, - .read = iodev_read, - .poll = iodev_poll -}; - -static struct miscdevice miscdev = -{ - .minor = MISC_DYNAMIC_MINOR, - .name = iodev_name, - .fops = &fops -}; - -static struct platform_driver iodev_driver = { - .driver = { - .name = iodev_name, - .owner = THIS_MODULE, - }, - .probe = iodev_probe, - .remove = __devexit_p(iodev_remove), -}; - - - -static const struct resource * -iodev_get_resource(struct platform_device *pdv, const char *name, - unsigned int type) -{ - char buf[80]; - if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf) - return NULL; - return platform_get_resource_byname(pdv, type, buf); -} - - - -/* No hotplugging on the platform bus - use __init */ -static int __init iodev_probe(struct platform_device *dev) -{ - const struct resource * const ri = - iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ); - - if (unlikely(!ri)) - return -ENXIO; - - iodev_irq = ri->start; - return misc_register(&miscdev); -} - - - -static int __exit iodev_remove(struct platform_device *dev) -{ - return misc_deregister(&miscdev); -} - -static int iodev_open(struct inode *i, struct file *f) -{ - int ret; - - ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED, - iodev_name, &miscdev); - - return ret; -} - -static int iodev_release(struct inode *i, struct file *f) -{ - free_irq(iodev_irq, &miscdev); - return 0; -} - - - - -static ssize_t -iodev_read(struct file *f, char __user *d, size_t s, loff_t *o) -{ - ssize_t ret; - DEFINE_WAIT(w); - - prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE); - if (!signal_pending(current)) - schedule(); - ret = signal_pending(current) ? -ERESTARTSYS : 0; - finish_wait(&wq, &w); - return ret; -} - - -static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p) -{ - poll_wait(f, &wq, p); - return POLLOUT | POLLWRNORM; -} - -static irqreturn_t iodev_irqhdl(int irq, void *ctxt) -{ - wake_up(&wq); - - return IRQ_HANDLED; -} - -static int __init iodev_init_module(void) -{ - return platform_driver_register(&iodev_driver); -} - - - -static void __exit iodev_cleanup_module(void) -{ - platform_driver_unregister(&iodev_driver); -} - -module_init(iodev_init_module); -module_exit(iodev_cleanup_module); - - - -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); -MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler"); -MODULE_VERSION("0.0"); -MODULE_LICENSE("GPL"); diff --git a/arch/mips/basler/excite/excite_iodev.h b/arch/mips/basler/excite/excite_iodev.h deleted file mode 100644 index cbfbb5d2ee6..00000000000 --- a/arch/mips/basler/excite/excite_iodev.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __EXCITE_IODEV_H__ -#define __EXCITE_IODEV_H__ - -/* Device name */ -#define IODEV_NAME "iodev" - -/* Resource names */ -#define IODEV_RESOURCE_IRQ "excite_iodev_irq" - -#endif /* __EXCITE_IODEV_H__ */ diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c deleted file mode 100644 index 934e0a6b101..00000000000 --- a/arch/mips/basler/excite/excite_irq.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright (C) by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslereb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/bitops.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/rm9k-ocd.h> - -#include <excite.h> - -extern asmlinkage void excite_handle_int(void); - -/* - * Initialize the interrupt handler - */ -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); - rm7k_cpu_irq_init(); - rm9k_cpu_irq_init(); -} - -asmlinkage void plat_irq_dispatch(void) -{ - const u32 - interrupts = read_c0_cause() >> 8, - mask = ((read_c0_status() >> 8) & 0x000000ff) | - (read_c0_intcontrol() & 0x0000ff00), - pending = interrupts & mask; - u32 msgintflags, msgintmask, msgint; - - /* process timer interrupt */ - if (pending & (1 << TIMER_IRQ)) { - do_IRQ(TIMER_IRQ); - return; - } - - /* Process PCI interrupts */ -#if USB_IRQ < 10 - msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20)); - if ((pending & (1 << USB_IRQ)) && msgint) { -#else - if (pending & (1 << USB_IRQ)) { -#endif - do_IRQ(USB_IRQ); - return; - } - - /* Process TITAN interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20)); - if ((pending & (1 << TITAN_IRQ)) && msgint) { - ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10)); - do_IRQ(TITAN_IRQ); - return; - } - - /* Process FPGA line #0 interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20)); - if ((pending & (1 << FPGA0_IRQ)) && msgint) { - do_IRQ(FPGA0_IRQ); - return; - } - - /* Process FPGA line #1 interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20)); - if ((pending & (1 << FPGA1_IRQ)) && msgint) { - do_IRQ(FPGA1_IRQ); - return; - } - - /* Process PHY interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20)); - if ((pending & (1 << PHY_IRQ)) && msgint) { - do_IRQ(PHY_IRQ); - return; - } - - /* Process spurious interrupts */ - spurious_interrupt(); -} diff --git a/arch/mips/basler/excite/excite_procfs.c b/arch/mips/basler/excite/excite_procfs.c deleted file mode 100644 index 08923e6825b..00000000000 --- a/arch/mips/basler/excite/excite_procfs.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * Procfs support for Basler eXcite - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/module.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/stat.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/rm9k-ocd.h> - -#include <excite.h> - -static int excite_unit_id_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%06x", unit_id); - return 0; -} - -static int excite_unit_id_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, excite_unit_id_proc_show, NULL); -} - -static const struct file_operations excite_unit_id_proc_fops = { - .owner = THIS_MODULE, - .open = excite_unit_id_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int -excite_bootrom_read(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - void __iomem * src; - - if (off >= EXCITE_SIZE_BOOTROM) { - *eof = 1; - return 0; - } - - if ((off + count) > EXCITE_SIZE_BOOTROM) - count = EXCITE_SIZE_BOOTROM - off; - - src = ioremap(EXCITE_PHYS_BOOTROM + off, count); - if (src) { - memcpy_fromio(page, src, count); - iounmap(src); - *start = page; - } else { - count = -ENOMEM; - } - - return count; -} - -void excite_procfs_init(void) -{ - /* Create & populate /proc/excite */ - struct proc_dir_entry * const pdir = proc_mkdir("excite", NULL); - if (pdir) { - struct proc_dir_entry * e; - - e = proc_create("unit_id", S_IRUGO, pdir, - &excite_unit_id_proc_fops); - if (e) e->size = 6; - - e = create_proc_read_entry("bootrom", S_IRUGO, pdir, - excite_bootrom_read, NULL); - if (e) e->size = EXCITE_SIZE_BOOTROM; - } -} diff --git a/arch/mips/basler/excite/excite_prom.c b/arch/mips/basler/excite/excite_prom.c deleted file mode 100644 index 68d8bc597e3..00000000000 --- a/arch/mips/basler/excite/excite_prom.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com) - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and - * Manish Lachwani. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/smp.h> -#include <linux/module.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> -#include <asm/bootinfo.h> -#include <asm/string.h> - -#include <excite.h> - -/* This struct is used by Redboot to pass arguments to the kernel */ -typedef struct -{ - char *name; - char *val; -} t_env_var; - -struct parmblock { - t_env_var memsize; - t_env_var modetty0; - t_env_var ethaddr; - t_env_var env_end; - char *argv[2]; - char text[0]; -}; - -static unsigned int prom_argc; -static const char ** prom_argv; -static const t_env_var * prom_env; - -static void prom_halt(void) __attribute__((noreturn)); -static void prom_exit(void) __attribute__((noreturn)); - - - -const char *get_system_type(void) -{ - return "Basler eXcite"; -} - -/* - * Halt the system - */ -static void prom_halt(void) -{ - printk(KERN_NOTICE "\n** System halted.\n"); - while (1) - asm volatile ( - "\t.set\tmips3\n" - "\twait\n" - "\t.set\tmips0\n" - ); -} - -/* - * Reset the CPU and re-enter Redboot - */ -static void prom_exit(void) -{ - unsigned int i; - volatile unsigned char * const flg = - (volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR); - - /* Clear the watchdog reset flag, set the reboot flag */ - *flg &= ~0x01; - *flg |= 0x80; - - for (i = 0; i < 10; i++) { - *(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02; - iob(); - mdelay(1000); - } - - printk(KERN_NOTICE "Reset failed\n"); - prom_halt(); -} - -static const char __init *prom_getenv(char *name) -{ - const t_env_var * p; - for (p = prom_env; p->name != NULL; p++) - if(strcmp(name, p->name) == 0) - break; - return p->val; -} - -/* - * Init routine which accepts the variables from Redboot - */ -void __init prom_init(void) -{ - const struct parmblock * const pb = (struct parmblock *) fw_arg2; - - prom_argc = fw_arg0; - prom_argv = (const char **) fw_arg1; - prom_env = &pb->memsize; - - /* Callbacks for halt, restart */ - _machine_restart = (void (*)(char *)) prom_exit; - _machine_halt = prom_halt; - -#ifdef CONFIG_32BIT - /* copy command line */ - strcpy(arcs_cmdline, prom_argv[1]); - memsize = simple_strtol(prom_getenv("memsize"), NULL, 16); - strcpy(modetty, prom_getenv("modetty0")); -#endif /* CONFIG_32BIT */ - -#ifdef CONFIG_64BIT -# error 64 bit support not implemented -#endif /* CONFIG_64BIT */ -} - -/* This is called from free_initmem(), so we need to provide it */ -void __init prom_free_prom_memory(void) -{ - /* Nothing to do */ -} diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c deleted file mode 100644 index d66b3b8edf2..00000000000 --- a/arch/mips/basler/excite/excite_setup.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and - * Manish Lachwani. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/tty.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/serial_8250.h> -#include <linux/ioport.h> -#include <linux/spinlock.h> -#include <asm/bootinfo.h> -#include <asm/mipsregs.h> -#include <asm/pgtable-32.h> -#include <asm/io.h> -#include <asm/time.h> -#include <asm/rm9k-ocd.h> - -#include <excite.h> - -#define TITAN_UART_CLK 25000000 - -#if 1 -/* normal serial port assignment */ -#define REGBASE_SER0 0x0208 -#define REGBASE_SER1 0x0238 -#define MASK_SER0 0x1 -#define MASK_SER1 0x2 -#else -/* serial ports swapped */ -#define REGBASE_SER0 0x0238 -#define REGBASE_SER1 0x0208 -#define MASK_SER0 0x2 -#define MASK_SER1 0x1 -#endif - -unsigned long memsize; -char modetty[30]; -unsigned int titan_irq = TITAN_IRQ; -static void __iomem * ctl_regs; -u32 unit_id; - -volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD); -volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN); - -/* Protect access to shared GPI registers */ -DEFINE_SPINLOCK(titan_lock); -int titan_irqflags; - - -/* - * The eXcite platform uses the alternate timer interrupt - * - * Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how - * to handle the alternate timer interrupt of the RM9000. - */ -void __init plat_time_init(void) -{ - const u32 modebit5 = ocd_readl(0x00e4); - unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2; - unsigned int div = ((modebit5 >> 16) & 0x1f) + 2; - - if (div == 33) - div = 1; - mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2; -} - -static int __init excite_init_console(void) -{ -#if defined(CONFIG_SERIAL_8250) - static __initdata char serr[] = - KERN_ERR "Serial port #%u setup failed\n"; - struct uart_port up; - - /* Take the DUART out of reset */ - titan_writel(0x00ff1cff, CPRR); - -#if (CONFIG_SERIAL_8250_NR_UARTS > 1) - /* Enable both ports */ - titan_writel(MASK_SER0 | MASK_SER1, UACFG); -#else - /* Enable port #0 only */ - titan_writel(MASK_SER0, UACFG); -#endif - - /* - * Set up serial port #0. Do not use autodetection; the result is - * not what we want. - */ - memset(&up, 0, sizeof(up)); - up.membase = (char *) titan_addr(REGBASE_SER0); - up.irq = TITAN_IRQ; - up.uartclk = TITAN_UART_CLK; - up.regshift = 0; - up.iotype = UPIO_RM9000; - up.type = PORT_RM9000; - up.flags = UPF_SHARE_IRQ; - up.line = 0; - if (early_serial_setup(&up)) - printk(serr, up.line); - -#if CONFIG_SERIAL_8250_NR_UARTS > 1 - /* And now for port #1. */ - up.membase = (char *) titan_addr(REGBASE_SER1); - up.line = 1; - if (early_serial_setup(&up)) - printk(serr, up.line); -#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */ -#else - /* Leave the DUART in reset */ - titan_writel(0x00ff3cff, CPRR); -#endif /* defined(CONFIG_SERIAL_8250) */ - - return 0; -} - -static int __init excite_platform_init(void) -{ - unsigned int i; - unsigned char buf[3]; - u8 reg; - void __iomem * dpr; - - /* BIU buffer allocations */ - ocd_writel(8, CPURSLMT); /* CPU */ - titan_writel(4, CPGRWL); /* GPI / Ethernet */ - - /* Map control registers located in FPGA */ - ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16); - if (!ctl_regs) - panic("eXcite: failed to map platform control registers\n"); - memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf)); - unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16); - - /* Clear the reboot flag */ - dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1); - reg = __raw_readb(dpr); - __raw_writeb(reg & 0x7f, dpr); - iounmap(dpr); - - /* Interrupt controller setup */ - for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) { - ocd_writel(0x00000000, i + 0x04); - ocd_writel(0xffffffff, i + 0x0c); - } - ocd_writel(0x2, NMICONFIG); - - ocd_writel(0x1 << (TITAN_MSGINT % 0x20), - INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20))); - ocd_writel((0x1 << (FPGA0_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))); - ocd_writel((0x1 << (FPGA1_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))); - ocd_writel((0x1 << (PHY_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))); -#if USB_IRQ < 10 - ocd_writel((0x1 << (USB_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))); -#endif - /* Enable the packet FIFO, XDMA and XDMA arbiter */ - titan_writel(0x00ff18ff, CPRR); - - /* - * Set up the PADMUX. Power down all ethernet slices, - * they will be powered up and configured at device startup. - */ - titan_writel(0x00878206, CPTC1R); - titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */ - - /* Reset and enable the FIFO block */ - titan_writel(0x00000001, SDRXFCIE); - titan_writel(0x00000001, SDTXFCIE); - titan_writel(0x00000100, SDRXFCIE); - titan_writel(0x00000000, SDTXFCIE); - - /* - * Initialize the common interrupt shared by all components of - * the GPI/Ethernet subsystem. - */ - titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0); - titan_writel(TITAN_MSGINT, CPCFG1); - - /* - * XDMA configuration. - * In order for the XDMA to be sharable among multiple drivers, - * the setup must be done here in the platform. The reason is that - * this setup can only be done while the XDMA is in reset. If this - * were done in a driver, it would interrupt all other drivers - * using the XDMA. - */ - titan_writel(0x80021dff, GXCFG); /* XDMA reset */ - titan_writel(0x00000000, CPXCISRA); - titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */ -#if defined(CONFIG_HIGHMEM) -# error change for HIGHMEM support! -#else - titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */ -#endif - titan_writel(0, GXDMA_DESCADR); - - for (i = 0x5040; i <= 0x5300; i += 0x0040) - titan_writel(0x80080000, i); /* reset channel */ - - titan_writel((0x1 << 29) /* no sparse tx descr. */ - | (0x1 << 28) /* no sparse rx descr. */ - | (0x1 << 23) | (0x1 << 24) /* descriptor coherency */ - | (0x1 << 21) | (0x1 << 22) /* data coherency */ - | (0x1 << 17) - | 0x1dff, - GXCFG); - -#if defined(CONFIG_SMP) -# error No SMP support -#else - /* All interrupts go to core #0 only. */ - titan_writel(0x1f007fff, CPDST0A); - titan_writel(0x00000000, CPDST0B); - titan_writel(0x0000ff3f, CPDST1A); - titan_writel(0x00000000, CPDST1B); - titan_writel(0x00ffffff, CPXDSTA); - titan_writel(0x00000000, CPXDSTB); -#endif - - /* Enable DUART interrupts, disable everything else. */ - titan_writel(0x04000000, CPGIG0ER); - titan_writel(0x000000c0, CPGIG1ER); - - excite_procfs_init(); - return 0; -} - -void __init plat_mem_setup(void) -{ - volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000; - - /* Announce RAM to system */ - add_memory_region(0x00000000, memsize, BOOT_MEM_RAM); - - /* Set up the peripheral address map */ - *(boot_ocd_base + (LKB9 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB10 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB11 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB12 / sizeof(u32))) = 0; - wmb(); - *(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4; - wmb(); - - ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5); - ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5); - ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13); - ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13); - - /* Local bus slot #0 */ - ocd_writel(0x00040510, LDP0); - ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9); - ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9); - - /* Local bus slot #2 */ - ocd_writel(0x00000330, LDP2); - ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11); - ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11); - - /* Local bus slot #3 */ - ocd_writel(0x00123413, LDP3); - ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12); - ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12); -} - - - -console_initcall(excite_init_console); -arch_initcall(excite_platform_init); - -EXPORT_SYMBOL(titan_lock); -EXPORT_SYMBOL(titan_irqflags); -EXPORT_SYMBOL(titan_irq); -EXPORT_SYMBOL(ocd_base); -EXPORT_SYMBOL(titan_base); diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c index fb284c3b2cf..c51405e5792 100644 --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c @@ -100,11 +100,11 @@ static __init void prom_init_console(void) static __init void prom_init_cmdline(void) { - static char buf[CL_SIZE] __initdata; + static char buf[COMMAND_LINE_SIZE] __initdata; /* Get the kernel command line from CFE */ - if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) { - buf[CL_SIZE-1] = 0; + if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) { + buf[COMMAND_LINE_SIZE - 1] = 0; strcpy(arcs_cmdline, buf); } @@ -112,13 +112,13 @@ static __init void prom_init_cmdline(void) * as CFE is not available anymore later in the boot process. */ if ((strstr(arcs_cmdline, "console=")) == NULL) { /* Try to read the default serial port used by CFE */ - if ((cfe_getenv("BOOT_CONSOLE", buf, CL_SIZE) < 0) + if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0) || (strncmp("uart", buf, 4))) /* Default to uart0 */ strcpy(buf, "uart0"); /* Compute the new command line */ - snprintf(arcs_cmdline, CL_SIZE, "%s console=ttyS%c,115200", + snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200", arcs_cmdline, buf[4]); } } diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile index 2a209d74f0b..094bc84765a 100644 --- a/arch/mips/boot/Makefile +++ b/arch/mips/boot/Makefile @@ -25,7 +25,7 @@ strip-flags = $(addprefix --remove-section=,$(drop-sections)) VMLINUX = vmlinux -all: vmlinux.ecoff vmlinux.srec addinitrd +all: vmlinux.ecoff vmlinux.srec vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS) @@ -39,11 +39,7 @@ vmlinux.bin: $(VMLINUX) vmlinux.srec: $(VMLINUX) $(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec -$(obj)/addinitrd: $(obj)/addinitrd.c - $(HOSTCC) -o $@ $^ - -clean-files += addinitrd \ - elf2ecoff \ +clean-files += elf2ecoff \ vmlinux.bin \ vmlinux.ecoff \ vmlinux.srec diff --git a/arch/mips/boot/addinitrd.c b/arch/mips/boot/addinitrd.c deleted file mode 100644 index b5b3febc10c..00000000000 --- a/arch/mips/boot/addinitrd.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * addinitrd - program to add a initrd image to an ecoff kernel - * - * (C) 1999 Thomas Bogendoerfer - * minor modifications, cleanup: Guido Guenther <agx@sigxcpu.org> - * further cleanup: Maciej W. Rozycki - */ - -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <unistd.h> -#include <stdio.h> -#include <netinet/in.h> - -#include "ecoff.h" - -#define MIPS_PAGE_SIZE 4096 -#define MIPS_PAGE_MASK (MIPS_PAGE_SIZE-1) - -#define swab16(x) \ - ((unsigned short)( \ - (((unsigned short)(x) & (unsigned short)0x00ffU) << 8) | \ - (((unsigned short)(x) & (unsigned short)0xff00U) >> 8) )) - -#define swab32(x) \ - ((unsigned int)( \ - (((unsigned int)(x) & (unsigned int)0x000000ffUL) << 24) | \ - (((unsigned int)(x) & (unsigned int)0x0000ff00UL) << 8) | \ - (((unsigned int)(x) & (unsigned int)0x00ff0000UL) >> 8) | \ - (((unsigned int)(x) & (unsigned int)0xff000000UL) >> 24) )) - -#define SWAB(a) (swab ? swab32(a) : (a)) - -void die(char *s) -{ - perror(s); - exit(1); -} - -int main(int argc, char *argv[]) -{ - int fd_vmlinux, fd_initrd, fd_outfile; - FILHDR efile; - AOUTHDR eaout; - SCNHDR esecs[3]; - struct stat st; - char buf[1024]; - unsigned long loadaddr; - unsigned long initrd_header[2]; - int i, cnt; - int swab = 0; - - if (argc != 4) { - printf("Usage: %s <vmlinux> <initrd> <outfile>\n", argv[0]); - exit(1); - } - - if ((fd_vmlinux = open (argv[1], O_RDONLY)) < 0) - die("open vmlinux"); - if (read (fd_vmlinux, &efile, sizeof efile) != sizeof efile) - die("read file header"); - if (read (fd_vmlinux, &eaout, sizeof eaout) != sizeof eaout) - die("read aout header"); - if (read (fd_vmlinux, esecs, sizeof esecs) != sizeof esecs) - die("read section headers"); - /* - * check whether the file is good for us - */ - /* TBD */ - - /* - * check, if we have to swab words - */ - if (ntohs(0xaa55) == 0xaa55) { - if (efile.f_magic == swab16(MIPSELMAGIC)) - swab = 1; - } else { - if (efile.f_magic == swab16(MIPSEBMAGIC)) - swab = 1; - } - - /* make sure we have an empty data segment for the initrd */ - if (eaout.dsize || esecs[1].s_size) { - fprintf(stderr, "Data segment not empty. Giving up!\n"); - exit(1); - } - if ((fd_initrd = open (argv[2], O_RDONLY)) < 0) - die("open initrd"); - if (fstat (fd_initrd, &st) < 0) - die("fstat initrd"); - loadaddr = ((SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size) - + MIPS_PAGE_SIZE-1) & ~MIPS_PAGE_MASK) - 8; - if (loadaddr < (SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size))) - loadaddr += MIPS_PAGE_SIZE; - initrd_header[0] = SWAB(0x494E5244); - initrd_header[1] = SWAB(st.st_size); - eaout.dsize = esecs[1].s_size = initrd_header[1] = SWAB(st.st_size+8); - eaout.data_start = esecs[1].s_vaddr = esecs[1].s_paddr = SWAB(loadaddr); - - if ((fd_outfile = open (argv[3], O_RDWR|O_CREAT|O_TRUNC, 0666)) < 0) - die("open outfile"); - if (write (fd_outfile, &efile, sizeof efile) != sizeof efile) - die("write file header"); - if (write (fd_outfile, &eaout, sizeof eaout) != sizeof eaout) - die("write aout header"); - if (write (fd_outfile, esecs, sizeof esecs) != sizeof esecs) - die("write section headers"); - /* skip padding */ - if(lseek(fd_vmlinux, SWAB(esecs[0].s_scnptr), SEEK_SET) == (off_t)-1) - die("lseek vmlinux"); - if(lseek(fd_outfile, SWAB(esecs[0].s_scnptr), SEEK_SET) == (off_t)-1) - die("lseek outfile"); - /* copy text segment */ - cnt = SWAB(eaout.tsize); - while (cnt) { - if ((i = read (fd_vmlinux, buf, sizeof buf)) <= 0) - die("read vmlinux"); - if (write (fd_outfile, buf, i) != i) - die("write vmlinux"); - cnt -= i; - } - if (write (fd_outfile, initrd_header, sizeof initrd_header) != sizeof initrd_header) - die("write initrd header"); - while ((i = read (fd_initrd, buf, sizeof buf)) > 0) - if (write (fd_outfile, buf, i) != i) - die("write initrd"); - close(fd_vmlinux); - close(fd_initrd); - return 0; -} diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile new file mode 100644 index 00000000000..e27f40bbd4e --- /dev/null +++ b/arch/mips/boot/compressed/Makefile @@ -0,0 +1,100 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. +# +# Adapted for MIPS Pete Popov, Dan Malek +# +# Copyright (C) 1994 by Linus Torvalds +# Adapted for PowerPC by Gary Thomas +# modified by Cort (cort@cs.nmt.edu) +# +# Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University +# Author: Wu Zhangjin <wuzj@lemote.com> +# + +# compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE +VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1) +VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536)))) +VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE)))) + +# set the default size of the mallocing area for decompressing +BOOT_HEAP_SIZE := 0x400000 + +# Disable Function Tracer +KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//") + +KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \ + -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \ + +KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \ + -DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) \ + -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) + +obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o + +obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o + +OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S +$(obj)/vmlinux.bin: $(KBUILD_IMAGE) + $(call if_changed,objcopy) + +suffix_$(CONFIG_KERNEL_GZIP) = gz +suffix_$(CONFIG_KERNEL_BZIP2) = bz2 +suffix_$(CONFIG_KERNEL_LZMA) = lzma +tool_$(CONFIG_KERNEL_GZIP) = gzip +tool_$(CONFIG_KERNEL_BZIP2) = bzip2 +tool_$(CONFIG_KERNEL_LZMA) = lzma +$(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin + $(call if_changed,$(tool_y)) + +$(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o + $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) \ + --add-section=.image=$< \ + --set-section-flags=.image=contents,alloc,load,readonly,data \ + $(obj)/dummy.o $@ + +LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T +vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o + $(call if_changed,ld) + $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@ + +# +# Some DECstations need all possible sections of an ECOFF executable +# +ifdef CONFIG_MACH_DECSTATION + E2EFLAGS = -a +else + E2EFLAGS = +endif + +# elf2ecoff can only handle 32bit image + +ifdef CONFIG_32BIT + VMLINUZ = vmlinuz +else + VMLINUZ = vmlinuz.32 +endif + +vmlinuz.32: vmlinuz + $(Q)$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@ + +vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ) + $(Q)$(obj)/../elf2ecoff $(VMLINUZ) vmlinuz.ecoff $(E2EFLAGS) + +$(obj)/../elf2ecoff: $(src)/../elf2ecoff.c + $(Q)$(HOSTCC) -o $@ $^ + +drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options +strip-flags = $(addprefix --remove-section=,$(drop-sections)) + +OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags) +vmlinuz.bin: vmlinuz + $(call if_changed,objcopy) + +OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags) +vmlinuz.srec: vmlinuz + $(call if_changed,objcopy) + +clean: +clean-files += *.o \ + vmlinu* diff --git a/arch/mips/boot/compressed/dbg.c b/arch/mips/boot/compressed/dbg.c new file mode 100644 index 00000000000..ff4dc7a33a9 --- /dev/null +++ b/arch/mips/boot/compressed/dbg.c @@ -0,0 +1,37 @@ +/* + * MIPS-specific debug support for pre-boot environment + * + * NOTE: putc() is board specific, if your board have a 16550 compatible uart, + * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you + * need to implement your own putc(). + */ + +#include <linux/init.h> +#include <linux/types.h> + +void __attribute__ ((weak)) putc(char c) +{ +} + +void puts(const char *s) +{ + char c; + while ((c = *s++) != '\0') { + putc(c); + if (c == '\n') + putc('\r'); + } +} + +void puthex(unsigned long long val) +{ + + unsigned char buf[10]; + int i; + for (i = 7; i >= 0; i--) { + buf[i] = "0123456789ABCDEF"[val & 0x0F]; + val >>= 4; + } + buf[8] = '\0'; + puts(buf); +} diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c new file mode 100644 index 00000000000..67330c2f731 --- /dev/null +++ b/arch/mips/boot/compressed/decompress.c @@ -0,0 +1,126 @@ +/* + * Misc. bootloader code for many machines. + * + * Copyright 2001 MontaVista Software Inc. + * Author: Matt Porter <mporter@mvista.com> Derived from + * arch/ppc/boot/prep/misc.c + * + * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/types.h> +#include <linux/kernel.h> + +#include <asm/addrspace.h> + +/* These two variables specify the free mem region + * that can be used for temporary malloc area + */ +unsigned long free_mem_ptr; +unsigned long free_mem_end_ptr; +char *zimage_start; + +/* The linker tells us where the image is. */ +extern unsigned char __image_begin, __image_end; +extern unsigned char __ramdisk_begin, __ramdisk_end; +unsigned long initrd_size; + +/* debug interfaces */ +extern void puts(const char *s); +extern void puthex(unsigned long long val); + +void error(char *x) +{ + puts("\n\n"); + puts(x); + puts("\n\n -- System halted"); + + while (1) + ; /* Halt */ +} + +/* activate the code for pre-boot environment */ +#define STATIC static + +#ifdef CONFIG_KERNEL_GZIP +void *memcpy(void *dest, const void *src, size_t n) +{ + int i; + const char *s = src; + char *d = dest; + + for (i = 0; i < n; i++) + d[i] = s[i]; + return dest; +} +#include "../../../../lib/decompress_inflate.c" +#endif + +#ifdef CONFIG_KERNEL_BZIP2 +void *memset(void *s, int c, size_t n) +{ + int i; + char *ss = s; + + for (i = 0; i < n; i++) + ss[i] = c; + return s; +} +#include "../../../../lib/decompress_bunzip2.c" +#endif + +#ifdef CONFIG_KERNEL_LZMA +#include "../../../../lib/decompress_unlzma.c" +#endif + +void decompress_kernel(unsigned long boot_heap_start) +{ + int zimage_size; + + /* + * We link ourself to an arbitrary low address. When we run, we + * relocate outself to that address. __image_beign points to + * the part of the image where the zImage is. -- Tom + */ + zimage_start = (char *)(unsigned long)(&__image_begin); + zimage_size = (unsigned long)(&__image_end) - + (unsigned long)(&__image_begin); + + /* + * The zImage and initrd will be between start and _end, so they've + * already been moved once. We're good to go now. -- Tom + */ + puts("zimage at: "); + puthex((unsigned long)zimage_start); + puts(" "); + puthex((unsigned long)(zimage_size + zimage_start)); + puts("\n"); + + if (initrd_size) { + puts("initrd at: "); + puthex((unsigned long)(&__ramdisk_begin)); + puts(" "); + puthex((unsigned long)(&__ramdisk_end)); + puts("\n"); + } + + /* this area are prepared for mallocing when decompressing */ + free_mem_ptr = boot_heap_start; + free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE; + + /* Display standard Linux/MIPS boot prompt for kernel args */ + puts("Uncompressing Linux at load address "); + puthex(VMLINUX_LOAD_ADDRESS_ULL); + puts("\n"); + /* Decompress the kernel with according algorithm */ + decompress(zimage_start, zimage_size, 0, 0, + (void *)VMLINUX_LOAD_ADDRESS_ULL, 0, error); + /* FIXME: is there a need to flush cache here? */ + puts("Now, booting the kernel...\n"); +} diff --git a/arch/mips/boot/compressed/dummy.c b/arch/mips/boot/compressed/dummy.c new file mode 100644 index 00000000000..31dbf45bf99 --- /dev/null +++ b/arch/mips/boot/compressed/dummy.c @@ -0,0 +1,4 @@ +int main(void) +{ + return 0; +} diff --git a/arch/mips/boot/compressed/head.S b/arch/mips/boot/compressed/head.S new file mode 100644 index 00000000000..4e65a8420be --- /dev/null +++ b/arch/mips/boot/compressed/head.S @@ -0,0 +1,56 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995 Waldorf Electronics + * Written by Ralf Baechle and Andreas Busse + * Copyright (C) 1995 - 1999 Ralf Baechle + * Copyright (C) 1996 Paul M. Antoine + * Modified for DECStation and hence R3000 support by Paul M. Antoine + * Further modifications by David S. Miller and Harald Koerfgen + * Copyright (C) 1999 Silicon Graphics, Inc. + */ + +#include <asm/asm.h> +#include <asm/regdef.h> + + .set noreorder + .cprestore + LEAF(start) +start: + /* Save boot rom start args */ + move s0, a0 + move s1, a1 + move s2, a2 + move s3, a3 + + /* Clear BSS */ + PTR_LA a0, _edata + PTR_LA a2, _end +1: sw zero, 0(a0) + bne a2, a0, 1b + addiu a0, a0, 4 + + PTR_LA a0, (.heap) /* heap address */ + PTR_LA sp, (.stack + 8192) /* stack address */ + + PTR_LA ra, 2f + PTR_LA k0, decompress_kernel + jr k0 + nop +2: + move a0, s0 + move a1, s1 + move a2, s2 + move a3, s3 + PTR_LI k0, KERNEL_ENTRY + jr k0 + nop +3: + b 3b + nop + END(start) + + .comm .heap,BOOT_HEAP_SIZE,4 + .comm .stack,4096*2,4 diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script new file mode 100644 index 00000000000..29e9f4c0d5d --- /dev/null +++ b/arch/mips/boot/compressed/ld.script @@ -0,0 +1,150 @@ +OUTPUT_ARCH(mips) +ENTRY(start) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + .init : { *(.init) } =0 + .text : + { + _ftext = . ; + *(.text) + *(.rodata) + *(.rodata1) + /* .gnu.warning sections are handled specially by elf32.em. */ + *(.gnu.warning) + } =0 + .kstrtab : { *(.kstrtab) } + + . = ALIGN(16); /* Exception table */ + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + __start___dbe_table = .; /* Exception table for data bus errors */ + __dbe_table : { *(__dbe_table) } + __stop___dbe_table = .; + + __start___ksymtab = .; /* Kernel symbol table */ + __ksymtab : { *(__ksymtab) } + __stop___ksymtab = .; + + _etext = .; + + . = ALIGN(8192); + .data.init_task : { *(.data.init_task) } + + /* Startup code */ + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(16); + __setup_start = .; + .setup.init : { *(.setup.init) } + __setup_end = .; + __initcall_start = .; + .initcall.init : { *(.initcall.init) } + __initcall_end = .; + . = ALIGN(4096); /* Align double page for init_task_union */ + __init_end = .; + + . = ALIGN(4096); + .data.page_aligned : { *(.data.idt) } + + . = ALIGN(32); + .data.cacheline_aligned : { *(.data.cacheline_aligned) } + + .fini : { *(.fini) } =0 + .reginfo : { *(.reginfo) } + /* Adjust the address for the data segment. We want to adjust up to + the same address within the page on the next page up. It would + be more correct to do this: + . = .; + The current expression does not correctly handle the case of a + text segment ending precisely at the end of a page; it causes the + data segment to skip a page. The above expression does not have + this problem, but it will currently (2/95) cause BFD to allocate + a single segment, combining both text and data, for this case. + This will prevent the text segment from being shared among + multiple executions of the program; I think that is more + important than losing a page of the virtual address space (note + that no actual memory is lost; the page which is skipped can not + be referenced). */ + . = .; + .data : + { + _fdata = . ; + *(.data) + + /* Put the compressed image here, so bss is on the end. */ + __image_begin = .; + *(.image) + __image_end = .; + /* Align the initial ramdisk image (INITRD) on page boundaries. */ + . = ALIGN(4096); + __ramdisk_begin = .; + *(.initrd) + __ramdisk_end = .; + . = ALIGN(4096); + + CONSTRUCTORS + } + .data1 : { *(.data1) } + _gp = . + 0x8000; + .lit8 : { *(.lit8) } + .lit4 : { *(.lit4) } + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + .got : { *(.got.plt) *(.got) } + .dynamic : { *(.dynamic) } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : { *(.sdata) } + . = ALIGN(4); + _edata = .; + PROVIDE (edata = .); + + __bss_start = .; + _fbss = .; + .sbss : { *(.sbss) *(.scommon) } + .bss : + { + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _end = . ; + PROVIDE (end = .); + } + + /* Sections to be discarded */ + /DISCARD/ : + { + *(.text.exit) + *(.data.exit) + *(.exitcall.exit) + } + + /* This is the MIPS specific mdebug section. */ + .mdebug : { *(.mdebug) } + /* These are needed for ELF backends which have not yet been + converted to the new style linker. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + /* DWARF debug sections. + Symbols in the .debug DWARF section are relative to the beginning of the + section so we begin .debug at 0. It's not clear yet what needs to happen + for the others. */ + .debug 0 : { *(.debug) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .line 0 : { *(.line) } + /* These must appear regardless of . */ + .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } + .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } + .comment : { *(.comment) } + .note : { *(.note) } +} diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c new file mode 100644 index 00000000000..c9caaf4fbf6 --- /dev/null +++ b/arch/mips/boot/compressed/uart-16550.c @@ -0,0 +1,43 @@ +/* + * 16550 compatible uart based serial debug support for zboot + */ + +#include <linux/types.h> +#include <linux/serial_reg.h> +#include <linux/init.h> + +#include <asm/addrspace.h> + +#if defined(CONFIG_MACH_LOONGSON) || defined(CONFIG_MIPS_MALTA) +#define UART_BASE 0x1fd003f8 +#define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset)) +#endif + +#ifdef CONFIG_AR7 +#include <ar7.h> +#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset)) +#endif + +#ifndef PORT +#error please define the serial port address for your own machine +#endif + +static inline unsigned int serial_in(int offset) +{ + return *((char *)PORT(offset)); +} + +static inline void serial_out(int offset, int value) +{ + *((char *)PORT(offset)) = value; +} + +void putc(char c) +{ + int timeout = 1024; + + while (((serial_in(UART_LSR) & UART_LSR_THRE) == 0) && (timeout-- > 0)) + ; + + serial_out(UART_TX, c); +} diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index 13943628052..3e9876317e6 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -9,7 +9,7 @@ # Copyright (C) 2005-2009 Cavium Networks # -obj-y := setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o +obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o diff --git a/arch/mips/cavium-octeon/cpu.c b/arch/mips/cavium-octeon/cpu.c new file mode 100644 index 00000000000..b6df5387e85 --- /dev/null +++ b/arch/mips/cavium-octeon/cpu.c @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/init.h> +#include <linux/irqflags.h> +#include <linux/notifier.h> +#include <linux/prefetch.h> +#include <linux/sched.h> + +#include <asm/cop2.h> +#include <asm/current.h> +#include <asm/mipsregs.h> +#include <asm/page.h> +#include <asm/octeon/octeon.h> + +static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action, + void *data) +{ + unsigned long flags; + unsigned int status; + + switch (action) { + case CU2_EXCEPTION: + prefetch(¤t->thread.cp2); + local_irq_save(flags); + KSTK_STATUS(current) |= ST0_CU2; + status = read_c0_status(); + write_c0_status(status | ST0_CU2); + octeon_cop2_restore(&(current->thread.cp2)); + write_c0_status(status & ~ST0_CU2); + local_irq_restore(flags); + + return NOTIFY_BAD; /* Don't call default notifier */ + } + + return NOTIFY_OK; /* Let default notifier send signals */ +} + +static struct notifier_block cnmips_cu2_notifier = { + .notifier_call = cnmips_cu2_call, +}; + +static int cnmips_cu2_setup(void) +{ + return register_cu2_notifier(&cnmips_cu2_notifier); +} +early_initcall(cnmips_cu2_setup); diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index be711dd2d91..cfdb4c2ac5c 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -159,6 +159,94 @@ out: } device_initcall(octeon_rng_device_init); +/* Octeon SMI/MDIO interface. */ +static int __init octeon_mdiobus_device_init(void) +{ + struct platform_device *pd; + int ret = 0; + + if (octeon_is_simulation()) + return 0; /* No mdio in the simulator. */ + + /* The bus number is the platform_device id. */ + pd = platform_device_alloc("mdio-octeon", 0); + if (!pd) { + ret = -ENOMEM; + goto out; + } + + ret = platform_device_add(pd); + if (ret) + goto fail; + + return ret; +fail: + platform_device_put(pd); + +out: + return ret; + +} +device_initcall(octeon_mdiobus_device_init); + +/* Octeon mgmt port Ethernet interface. */ +static int __init octeon_mgmt_device_init(void) +{ + struct platform_device *pd; + int ret = 0; + int port, num_ports; + + struct resource mgmt_port_resource = { + .flags = IORESOURCE_IRQ, + .start = -1, + .end = -1 + }; + + if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX)) + return 0; + + if (OCTEON_IS_MODEL(OCTEON_CN56XX)) + num_ports = 1; + else + num_ports = 2; + + for (port = 0; port < num_ports; port++) { + pd = platform_device_alloc("octeon_mgmt", port); + if (!pd) { + ret = -ENOMEM; + goto out; + } + switch (port) { + case 0: + mgmt_port_resource.start = OCTEON_IRQ_MII0; + break; + case 1: + mgmt_port_resource.start = OCTEON_IRQ_MII1; + break; + default: + BUG(); + } + mgmt_port_resource.end = mgmt_port_resource.start; + + ret = platform_device_add_resources(pd, &mgmt_port_resource, 1); + + if (ret) + goto fail; + + ret = platform_device_add(pd); + if (ret) + goto fail; + } + return ret; +fail: + platform_device_put(pd); + +out: + return ret; + +} +device_initcall(octeon_mgmt_device_init); + MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Platform driver for Octeon SOC"); diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig index 35648302f7c..5a5b6ba7514 100644 --- a/arch/mips/configs/ar7_defconfig +++ b/arch/mips/configs/ar7_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set CONFIG_AR7=y -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -265,7 +264,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_PROBE_INITRD_HEADER=y # CONFIG_FREEZER is not set # @@ -1053,7 +1051,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index 94b7d57f906..267bd46120b 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set CONFIG_BCM47XX=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1853,7 +1852,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig index ea00c18d1f7..7fee0273c82 100644 --- a/arch/mips/configs/bcm63xx_defconfig +++ b/arch/mips/configs/bcm63xx_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set CONFIG_BCM63XX=y # CONFIG_MIPS_COBALT is not set @@ -942,7 +941,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 13d9eb4736c..c2f06e38c85 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1237,7 +1236,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_SB1XXX_CORELIS is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 185df23fd46..72b7e456916 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -783,7 +782,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/cavium-octeon_defconfig b/arch/mips/configs/cavium-octeon_defconfig index 7afaa28a376..c8507bc8e92 100644 --- a/arch/mips/configs/cavium-octeon_defconfig +++ b/arch/mips/configs/cavium-octeon_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -269,7 +268,6 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y -# CONFIG_PROBE_INITRD_HEADER is not set # CONFIG_FREEZER is not set # @@ -822,7 +820,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 6c8cca8589b..49e61312e00 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set @@ -1126,7 +1125,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index dbdf3bb1a34..68e90cd6b2d 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1090,7 +1089,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index fa681447589..90812830e94 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1090,7 +1089,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index d73f1de43b5..dabf03032e0 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_DB1550 is not set CONFIG_MIPS_DB1200=y # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1172,7 +1171,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=48M" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index ec3e028a5b2..a1513137313 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1390,7 +1389,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 7631dae51be..6b64339c001 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y CONFIG_MIPS_DB1550=y # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1207,7 +1206,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 9e65e6a2dcb..cbb4d86f291 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set CONFIG_MACH_DECSTATION=y # CONFIG_MACH_JAZZ is not set @@ -882,7 +881,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 1bd84d42b14..52968c46c80 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -561,7 +560,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig deleted file mode 100644 index 1995d43a2ed..00000000000 --- a/arch/mips/configs/excite_defconfig +++ /dev/null @@ -1,1335 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:31 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -CONFIG_BASLER_EXCITE=y -# CONFIG_BASLER_EXCITE_PROTOTYPE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_COHERENT=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_CPU_RM7K=y -CONFIG_IRQ_CPU_RM9K=y -CONFIG_MIPS_RM9122=y -CONFIG_SERIAL_RM9000=y -CONFIG_GPI_RM9000=y -CONFIG_WDT_RM9000=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -CONFIG_CPU_RM9000=y -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_RM9000=y -CONFIG_WEAK_ORDERING=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_BASLER_EXCITE is not set -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_WDT_RM9K_GPI=m - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_SMIVGX is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=m -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -# CONFIG_CRYPTO_HMAC is not set -CONFIG_CRYPTO_XCBC=m -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -# CONFIG_CRYPTO_DES is not set -CONFIG_CRYPTO_FCRYPT=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index 0197f0de6b3..a09dd03aa8c 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc1 -# Thu Jul 2 22:37:00 2009 +# Linux kernel version: 2.6.32-rc4 +# Fri Oct 16 13:18:01 2009 # CONFIG_MIPS=y @@ -10,8 +10,8 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -105,6 +105,8 @@ CONFIG_CPU_LOONGSON2E=y # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set # CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y CONFIG_CPU_LOONGSON2=y CONFIG_SYS_HAS_CPU_LOONGSON2E=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y @@ -135,12 +137,16 @@ CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PHYS_ADDR_T_64BIT=y @@ -148,6 +154,7 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y @@ -180,6 +187,12 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-fuloong2e" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -193,11 +206,12 @@ CONFIG_BSD_PROCESS_ACCT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -235,18 +249,16 @@ CONFIG_SHMEM=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_SYSCALL_WRAPPERS=y @@ -255,8 +267,8 @@ CONFIG_HAVE_SYSCALL_WRAPPERS=y # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 @@ -283,7 +295,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -# CONFIG_FREEZER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -321,9 +333,14 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y # CONFIG_SUSPEND is not set -# CONFIG_HIBERNATION is not set +CONFIG_HIBERNATION_NVS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="/dev/hda3" +# CONFIG_PM_RUNTIME is not set CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options @@ -442,6 +459,7 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -473,6 +491,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -481,7 +500,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set CONFIG_NET_9P=m @@ -495,6 +513,7 @@ CONFIG_NET_9P=m # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -504,9 +523,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -820,6 +839,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -867,10 +887,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -886,6 +903,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_CDC_PHONET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -933,12 +951,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -946,6 +968,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set @@ -1015,6 +1038,7 @@ CONFIG_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y @@ -1070,9 +1094,6 @@ CONFIG_I2C_VIAPRO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1088,7 +1109,6 @@ CONFIG_I2C_VIAPRO=m # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1105,6 +1125,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1114,6 +1135,7 @@ CONFIG_SSB_POSSIBLE=y # # Graphics support # +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1198,6 +1220,7 @@ CONFIG_FONT_8x16=y # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1304,7 +1327,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y # @@ -1356,6 +1378,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_ISP1760_HCD=m +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1453,6 +1476,7 @@ CONFIG_UIO_CIF=m # CONFIG_UIO_SMX is not set # CONFIG_UIO_AEC is not set # CONFIG_UIO_SERCOS3 is not set +# CONFIG_UIO_PCI_GENERIC is not set # # TI VLYNQ @@ -1469,10 +1493,10 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -CONFIG_EXT4DEV_COMPAT=y CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set @@ -1489,6 +1513,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1557,7 +1582,6 @@ CONFIG_OMFS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -1666,6 +1690,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1678,13 +1703,14 @@ CONFIG_NOP_TRACER=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options @@ -1742,11 +1768,13 @@ CONFIG_CRYPTO_XTS=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_GHASH=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index f14d38ba603..222d7eca2fe 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1188,7 +1187,7 @@ CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 1fc73aa7b50..ed84b4cb3c8 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -940,7 +939,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index 539dccb0345..dab2e5aaada 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -816,7 +815,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index d934bdefb39..1841c88d3d2 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1126,7 +1125,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index d22df61833a..14c2ab3b267 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set CONFIG_MACH_JAZZ=y @@ -1374,7 +1373,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 5380f1f582d..4d66c44cced 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -835,7 +834,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index 044074db7e5..08d481e3d42 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -798,7 +797,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig new file mode 100644 index 00000000000..b71a0a4fb95 --- /dev/null +++ b/arch/mips/configs/lemote2f_defconfig @@ -0,0 +1,1835 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc6 +# Mon Nov 9 23:42:42 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +CONFIG_MACH_LOONGSON=y +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_LEMOTE_FULOONG2E is not set +CONFIG_LEMOTE_MACH2F=y +CONFIG_CS5536=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_I8259=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2E is not set +CONFIG_CPU_LOONGSON2F=y +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y +CONFIG_CPU_LOONGSON2=y +CONFIG_SYS_HAS_CPU_LOONGSON2F=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +# CONFIG_32BIT is not set +CONFIG_64BIT=y +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_BOARD_SCACHE=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_WB=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLOCK_COMPAT=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_ISA=y +CONFIG_MMU=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_MIPS32_COMPAT=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_BINFMT_ELF32=y + +# +# Power management options +# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION_NVS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="/dev/hda3" +# CONFIG_PM_RUNTIME is not set +CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +CONFIG_DEFAULT_BIC=y +# CONFIG_DEFAULT_CUBIC is not set +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="bic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +# CONFIG_RFKILL_INPUT is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +# CONFIG_PNP is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set + +# +# Other IDE chipsets support +# + +# +# Note: most of these also require special kernel boot parameters +# +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_QD65XX is not set +# CONFIG_BLK_DEV_UMC8672 is not set +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_IFB is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_TC35815 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_TUNE_TWISTER=y +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set +CONFIG_WLAN=y +CONFIG_WLAN_PRE80211=y +# CONFIG_STRIP is not set +# CONFIG_WAVELAN is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_HSO is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +CONFIG_MOUSE_PS2_SYNAPTICS=y +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=16 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_FOURPORT=y +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set +# CONFIG_SERIAL_8250_HUB6 is not set +# CONFIG_SERIAL_8250_SHARE_IRQ is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_STRADIS is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +CONFIG_FB_BOOT_VESA_SUPPORT=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +CONFIG_FB_SIS=y +CONFIG_FB_SIS_300=y +CONFIG_FB_SIS_315=y +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_FONT_6x11=y +CONFIG_FONT_7x14=y +CONFIG_FONT_PEARL_8x8=y +CONFIG_FONT_ACORN_8x8=y +CONFIG_FONT_MINI_4x6=y +CONFIG_FONT_SUN8x16=y +CONFIG_FONT_SUN12x22=y +CONFIG_FONT_10x18=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +CONFIG_SND_CS5535AUDIO=m +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_MIPS is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +# CONFIG_USB_PRINTER is not set +CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_ET131X is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_ALTERA_PCIE_CHDMA is not set +# CONFIG_RTL8187SE is not set +# CONFIG_RTL8192SU is not set +# CONFIG_RTL8192E is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_B3DFG is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set +# CONFIG_FB_UDL is not set +# CONFIG_VME_BUS is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set +CONFIG_FB_SM7XX=y +CONFIG_FB_SM7XX_ACCEL=y + +# +# File systems +# +# CONFIG_EXT2_FS is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_CMDLINE_BOOL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 3f01870b4d6..d3c601206db 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # CONFIG_ZONE_DMA=y # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1591,7 +1590,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig index d001f7e8741..6a325c02b63 100644 --- a/arch/mips/configs/markeins_defconfig +++ b/arch/mips/configs/markeins_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1366,7 +1365,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 7358454deaa..f77a34e0f93 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -635,7 +634,9 @@ CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp" +# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 8c720e51795..17203056b22 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -817,7 +816,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index ecbc030b7b6..000d185ddf4 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1412,7 +1411,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set # CONFIG_MIPS_UNCACHED is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 9477f040796..144b94d9a6a 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # CONFIG_MACH_ALCHEMY=y -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -3018,7 +3017,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index be8091ef0a7..ddf67f63919 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1083,7 +1082,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index e74ba794c78..5ec60836b64 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1200,7 +1199,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 1d896fd830d..6647642b5d9 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1193,7 +1192,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig index fef4d31c205..848344d588d 100644 --- a/arch/mips/configs/pnx8335-stb225_defconfig +++ b/arch/mips/configs/pnx8335-stb225_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1034,7 +1033,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set # CONFIG_KERNEL_TESTS is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index e10c7116c3c..9d721fdccb3 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1215,7 +1214,9 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" +# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 5ed3c8dfa0a..ab07ec08c6f 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1205,7 +1204,9 @@ CONFIG_DEBUG_SLAB=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" +# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig new file mode 100644 index 00000000000..7291633d81c --- /dev/null +++ b/arch/mips/configs/powertv_defconfig @@ -0,0 +1,1550 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31-rc5 +# Fri Aug 28 14:49:33 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +CONFIG_POWERTV=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIN_RUNTIME_RESOURCES is not set +# CONFIG_BOOTLOADER_DRIVER is not set +CONFIG_BOOTLOADER_FAMILY="R2" +CONFIG_CSRC_POWERTV=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_EARLY_PRINTK is not set +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_NO_IOPORT is not set +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR2=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_MIPSR2_IRQ_EI=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_HIGHMEM is not set +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +CONFIG_HZ_1000=y +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=1000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +CONFIG_TIMERFD=y +# CONFIG_EVENTFD is not set +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_FREEZER is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_MMU=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y +CONFIG_INET6_IPCOMP=y +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=y +CONFIG_INET6_TUNNEL=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +CONFIG_IPV6_TUNNEL=y +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +# CONFIG_BRIDGE_NETFILTER is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=y +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=y +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=y +# CONFIG_IP_NF_TARGET_REJECT is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=y +CONFIG_IP_NF_ARPFILTER=y +# CONFIG_IP_NF_ARP_MANGLE is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=y +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_TARGET_LOG is not set +CONFIG_IP6_NF_FILTER=y +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_MANGLE is not set +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=y +CONFIG_BRIDGE=y +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +CONFIG_NET_SCH_TBF=y +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set +# CONFIG_BE2NET is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +CONFIG_USB_SERIAL_CP210X=y +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="rw dhash_entries=1024 ihash_entries=1024 ip=10.0.1.3:10.0.1.1:10.0.1.1:255.255.255.0:zeus:eth0: root=/dev/nfs nfsroot=/nfsroot/cramfs,wsize=512,rsize=512,tcp nokgdb console=ttyUSB0,115200 memsize=252M" +# CONFIG_CMDLINE_OVERRIDE is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig index f40c3a04739..57a50483abd 100644 --- a/arch/mips/configs/rb532_defconfig +++ b/arch/mips/configs/rb532_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1204,7 +1203,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index 6c6a19aebe1..21c2022d46e 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set @@ -284,7 +283,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_PROBE_INITRD_HEADER is not set # CONFIG_FREEZER is not set # @@ -1063,7 +1061,7 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index e53b8d096cf..79036289003 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1694,7 +1693,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 7f38c0b956f..7f07bf02b83 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -961,7 +960,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_SB1XXX_CORELIS is not set # diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index b5059881bc7..c54d1128f9a 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -892,7 +891,9 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index b06a716bf23..e7c5cd32a2b 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -895,7 +894,9 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 46512cf7ce0..b50032ba4d0 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1077,7 +1076,9 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index b437eb7f867..c02ba08b69a 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -755,7 +754,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index 06acc7482e4..a35bc41389e 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -887,7 +886,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200n8" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 69feaf88b51..e3d68d651e7 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -824,7 +823,7 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/fw/arc/cmdline.c b/arch/mips/fw/arc/cmdline.c index 4ca4eef934a..5c8603c85f2 100644 --- a/arch/mips/fw/arc/cmdline.c +++ b/arch/mips/fw/arc/cmdline.c @@ -16,11 +16,6 @@ #undef DEBUG_CMDLINE -char * __init prom_getcmdline(void) -{ - return arcs_cmdline; -} - static char *ignored[] = { "ConsoleIn=", "ConsoleOut=", diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index f5dfaf6a160..09eee09780f 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -67,9 +67,9 @@ #define MACH_LEMOTE_ML2F7 3 #define MACH_LEMOTE_YL2F89 4 #define MACH_DEXXON_GDIUM2F10 5 -#define MACH_LOONGSON_END 6 - -#define CL_SIZE COMMAND_LINE_SIZE +#define MACH_LEMOTE_NAS 6 +#define MACH_LEMOTE_LL2F 7 +#define MACH_LOONGSON_END 8 extern char *system_type; const char *get_system_type(void); @@ -107,7 +107,7 @@ extern void free_init_pages(const char *what, /* * Initial kernel command line, usually setup by prom_init() */ -extern char arcs_cmdline[CL_SIZE]; +extern char arcs_cmdline[COMMAND_LINE_SIZE]; /* * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h new file mode 100644 index 00000000000..83894aa7932 --- /dev/null +++ b/arch/mips/include/asm/clock.h @@ -0,0 +1,64 @@ +#ifndef __ASM_MIPS_CLOCK_H +#define __ASM_MIPS_CLOCK_H + +#include <linux/kref.h> +#include <linux/list.h> +#include <linux/seq_file.h> +#include <linux/clk.h> + +extern void (*cpu_wait) (void); + +struct clk; + +struct clk_ops { + void (*init) (struct clk *clk); + void (*enable) (struct clk *clk); + void (*disable) (struct clk *clk); + void (*recalc) (struct clk *clk); + int (*set_rate) (struct clk *clk, unsigned long rate, int algo_id); + long (*round_rate) (struct clk *clk, unsigned long rate); +}; + +struct clk { + struct list_head node; + const char *name; + int id; + struct module *owner; + + struct clk *parent; + struct clk_ops *ops; + + struct kref kref; + + unsigned long rate; + unsigned long flags; +}; + +#define CLK_ALWAYS_ENABLED (1 << 0) +#define CLK_RATE_PROPAGATES (1 << 1) + +/* Should be defined by processor-specific code */ +void arch_init_clk_ops(struct clk_ops **, int type); + +int clk_init(void); + +int __clk_enable(struct clk *); +void __clk_disable(struct clk *); + +void clk_recalc_rate(struct clk *); + +int clk_register(struct clk *); +void clk_unregister(struct clk *); + +/* the exported API, in addition to clk_set_rate */ +/** + * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter + * @clk: clock source + * @rate: desired clock rate in Hz + * @algo_id: algorithm id to be passed down to ops->set_rate + * + * Returns success (0) or negative errno. + */ +int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id); + +#endif /* __ASM_MIPS_CLOCK_H */ diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h new file mode 100644 index 00000000000..6b04c98b7fa --- /dev/null +++ b/arch/mips/include/asm/cop2.h @@ -0,0 +1,23 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_COP2_H +#define __ASM_COP2_H + +enum cu2_ops { + CU2_EXCEPTION, + CU2_LWC2_OP, + CU2_LDC2_OP, + CU2_SWC2_OP, + CU2_SDC2_OP, +}; + +extern int register_cu2_notifier(struct notifier_block *nb); +extern int cu2_notifier_call_chain(unsigned long val, void *v); + +#endif /* __ASM_COP2_H */ diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 4b96d1a3605..cf373a95fe4 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -154,6 +154,8 @@ #define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */ #define PRID_REV_VR4130 0x0080 #define PRID_REV_34K_V1_0_2 0x0022 +#define PRID_REV_LOONGSON2E 0x0002 +#define PRID_REV_LOONGSON2F 0x0003 /* * Older processors used to encode processor version and revision in two diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h index 8a3ef247659..7fcef8ef3fa 100644 --- a/arch/mips/include/asm/fpu.h +++ b/arch/mips/include/asm/fpu.h @@ -28,15 +28,7 @@ struct sigcontext; struct sigcontext32; -extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc); -extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc); - -extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc); -extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc); - extern void fpu_emulator_init_fpu(void); -extern int fpu_emulator_save_context(struct sigcontext __user *sc); -extern int fpu_emulator_restore_context(struct sigcontext __user *sc); extern void _init_fpu(void); extern void _save_fp(struct task_struct *); extern void _restore_fp(struct task_struct *); diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h index e5189572956..aecada6f611 100644 --- a/arch/mips/include/asm/fpu_emulator.h +++ b/arch/mips/include/asm/fpu_emulator.h @@ -25,17 +25,27 @@ #include <asm/break.h> #include <asm/inst.h> +#include <asm/local.h> + +#ifdef CONFIG_DEBUG_FS struct mips_fpu_emulator_stats { - unsigned int emulated; - unsigned int loads; - unsigned int stores; - unsigned int cp1ops; - unsigned int cp1xops; - unsigned int errors; + local_t emulated; + local_t loads; + local_t stores; + local_t cp1ops; + local_t cp1xops; + local_t errors; }; -extern struct mips_fpu_emulator_stats fpuemustats; +DECLARE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats); + +#define MIPS_FPU_EMU_INC_STATS(M) \ + cpu_local_wrap(__local_inc(&__get_cpu_var(fpuemustats).M)) + +#else +#define MIPS_FPU_EMU_INC_STATS(M) do { } while (0) +#endif /* CONFIG_DEBUG_FS */ extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc); diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h index 40a8c178f10..3986cd8704f 100644 --- a/arch/mips/include/asm/ftrace.h +++ b/arch/mips/include/asm/ftrace.h @@ -1 +1,90 @@ -/* empty */ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + * + * Copyright (C) 2009 DSLab, Lanzhou University, China + * Author: Wu Zhangjin <wuzj@lemote.com> + */ + +#ifndef _ASM_MIPS_FTRACE_H +#define _ASM_MIPS_FTRACE_H + +#ifdef CONFIG_FUNCTION_TRACER + +#define MCOUNT_ADDR ((unsigned long)(_mcount)) +#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ + +#ifndef __ASSEMBLY__ +extern void _mcount(void); +#define mcount _mcount + +#define safe_load(load, src, dst, error) \ +do { \ + asm volatile ( \ + "1: " load " %[" STR(dst) "], 0(%[" STR(src) "])\n"\ + " li %[" STR(error) "], 0\n" \ + "2:\n" \ + \ + ".section .fixup, \"ax\"\n" \ + "3: li %[" STR(error) "], 1\n" \ + " j 2b\n" \ + ".previous\n" \ + \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR) "\t1b, 3b\n\t" \ + ".previous\n" \ + \ + : [dst] "=&r" (dst), [error] "=r" (error)\ + : [src] "r" (src) \ + : "memory" \ + ); \ +} while (0) + +#define safe_store(store, src, dst, error) \ +do { \ + asm volatile ( \ + "1: " store " %[" STR(src) "], 0(%[" STR(dst) "])\n"\ + " li %[" STR(error) "], 0\n" \ + "2:\n" \ + \ + ".section .fixup, \"ax\"\n" \ + "3: li %[" STR(error) "], 1\n" \ + " j 2b\n" \ + ".previous\n" \ + \ + ".section\t__ex_table,\"a\"\n\t"\ + STR(PTR) "\t1b, 3b\n\t" \ + ".previous\n" \ + \ + : [error] "=r" (error) \ + : [dst] "r" (dst), [src] "r" (src)\ + : "memory" \ + ); \ +} while (0) + +#define safe_load_code(dst, src, error) \ + safe_load(STR(lw), src, dst, error) +#define safe_store_code(src, dst, error) \ + safe_store(STR(sw), src, dst, error) + +#define safe_load_stack(dst, src, error) \ + safe_load(STR(PTR_L), src, dst, error) + +#define safe_store_stack(src, dst, error) \ + safe_store(STR(PTR_S), src, dst, error) + + +#ifdef CONFIG_DYNAMIC_FTRACE +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + return addr; +} + +struct dyn_arch_ftrace { +}; + +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_FUNCTION_TRACER */ +#endif /* _ASM_MIPS_FTRACE_H */ diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index 09b08d05ff7..06960364c96 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -113,36 +113,11 @@ do { \ #endif -/* - * do_IRQ handles all normal device IRQ's (the special - * SMP cross-CPU interrupts have their own specific - * handlers). - * - * Ideally there should be away to get this into kernel/irq/handle.c to - * avoid the overhead of a call for just a tiny function ... - */ -#define do_IRQ(irq) \ -do { \ - irq_enter(); \ - __DO_IRQ_SMTC_HOOK(irq); \ - generic_handle_irq(irq); \ - irq_exit(); \ -} while (0) +extern void do_IRQ(unsigned int irq); #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF -/* - * To avoid inefficient and in some cases pathological re-checking of - * IRQ affinity, we have this variant that skips the affinity check. - */ - -#define do_IRQ_no_affinity(irq) \ -do { \ - irq_enter(); \ - __NO_AFFINITY_IRQ_SMTC_HOOK(irq); \ - generic_handle_irq(irq); \ - irq_exit(); \ -} while (0) +extern void do_IRQ_no_affinity(unsigned int irq); #endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h deleted file mode 100644 index 107104c3cd1..00000000000 --- a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com> - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H - -/* - * Basler eXcite has an RM9122 processor. - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_icache_snoops_remote_store 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 32 - -#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-excite/excite.h b/arch/mips/include/asm/mach-excite/excite.h deleted file mode 100644 index 4c29ba44992..00000000000 --- a/arch/mips/include/asm/mach-excite/excite.h +++ /dev/null @@ -1,154 +0,0 @@ -#ifndef __EXCITE_H__ -#define __EXCITE_H__ - -#include <linux/init.h> -#include <asm/addrspace.h> -#include <asm/types.h> - -#define EXCITE_CPU_EXT_CLOCK 100000000 - -#if !defined(__ASSEMBLY__) -void __init excite_kgdb_init(void); -void excite_procfs_init(void); -extern unsigned long memsize; -extern char modetty[]; -extern u32 unit_id; -#endif - -/* Base name for XICAP devices */ -#define XICAP_NAME "xicap_gpi" - -/* OCD register offsets */ -#define LKB0 0x0038 -#define LKB5 0x0128 -#define LKM5 0x012C -#define LKB7 0x0138 -#define LKM7 0x013c -#define LKB8 0x0140 -#define LKM8 0x0144 -#define LKB9 0x0148 -#define LKM9 0x014c -#define LKB10 0x0150 -#define LKM10 0x0154 -#define LKB11 0x0158 -#define LKM11 0x015c -#define LKB12 0x0160 -#define LKM12 0x0164 -#define LKB13 0x0168 -#define LKM13 0x016c -#define LDP0 0x0200 -#define LDP1 0x0210 -#define LDP2 0x0220 -#define LDP3 0x0230 -#define INTPIN0 0x0A40 -#define INTPIN1 0x0A44 -#define INTPIN2 0x0A48 -#define INTPIN3 0x0A4C -#define INTPIN4 0x0A50 -#define INTPIN5 0x0A54 -#define INTPIN6 0x0A58 -#define INTPIN7 0x0A5C - - - - -/* TITAN register offsets */ -#define CPRR 0x0004 -#define CPDSR 0x0008 -#define CPTC0R 0x000c -#define CPTC1R 0x0010 -#define CPCFG0 0x0020 -#define CPCFG1 0x0024 -#define CPDST0A 0x0028 -#define CPDST0B 0x002c -#define CPDST1A 0x0030 -#define CPDST1B 0x0034 -#define CPXDSTA 0x0038 -#define CPXDSTB 0x003c -#define CPXCISRA 0x0048 -#define CPXCISRB 0x004c -#define CPGIG0ER 0x0050 -#define CPGIG1ER 0x0054 -#define CPGRWL 0x0068 -#define CPURSLMT 0x00f8 -#define UACFG 0x0200 -#define UAINTS 0x0204 -#define SDRXFCIE 0x4828 -#define SDTXFCIE 0x4928 -#define INTP0Status0 0x1B00 -#define INTP0Mask0 0x1B04 -#define INTP0Set0 0x1B08 -#define INTP0Clear0 0x1B0C -#define GXCFG 0x5000 -#define GXDMADRPFX 0x5018 -#define GXDMA_DESCADR 0x501c -#define GXCH0TDESSTRT 0x5054 - -/* IRQ definitions */ -#define NMICONFIG 0xac0 -#define TITAN_MSGINT 0xc4 -#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2) -#define FPGA0_MSGINT 0x5a -#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2) -#define FPGA1_MSGINT 0x7b -#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2) -#define PHY_MSGINT 0x9c -#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2) - -#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE) -/* Pre-release units used interrupt pin #9 */ -#define USB_IRQ 11 -#else -/* Re-designed units use interrupt pin #1 */ -#define USB_MSGINT 0x39 -#define USB_IRQ ((USB_MSGINT / 0x20) + 2) -#endif -#define TIMER_IRQ 12 - - -/* Device address ranges */ -#define EXCITE_OFFS_OCD 0x1fffc000 -#define EXCITE_SIZE_OCD (16 * 1024) -#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD) -#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD) - -#define EXCITE_OFFS_SCRAM 0x1fffa000 -#define EXCITE_SIZE_SCRAM (8 << 10) -#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM) -#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM) - -#define EXCITE_OFFS_PCI_IO 0x1fff8000 -#define EXCITE_SIZE_PCI_IO (8 << 10) -#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO) -#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO) - -#define EXCITE_OFFS_TITAN 0x1fff0000 -#define EXCITE_SIZE_TITAN (32 << 10) -#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN) -#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN) - -#define EXCITE_OFFS_PCI_MEM 0x1ffe0000 -#define EXCITE_SIZE_PCI_MEM (64 << 10) -#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM) -#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM) - -#define EXCITE_OFFS_FPGA 0x1ffdc000 -#define EXCITE_SIZE_FPGA (16 << 10) -#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA) -#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA) - -#define EXCITE_OFFS_NAND 0x1ffd8000 -#define EXCITE_SIZE_NAND (16 << 10) -#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND) -#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND) - -#define EXCITE_OFFS_BOOTROM 0x1f000000 -#define EXCITE_SIZE_BOOTROM (8 << 20) -#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM) -#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM) - -/* FPGA address offsets */ -#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */ -#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */ - -#endif /* __EXCITE_H__ */ diff --git a/arch/mips/include/asm/mach-excite/excite_fpga.h b/arch/mips/include/asm/mach-excite/excite_fpga.h deleted file mode 100644 index 0a1ef69bece..00000000000 --- a/arch/mips/include/asm/mach-excite/excite_fpga.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef EXCITE_FPGA_H_INCLUDED -#define EXCITE_FPGA_H_INCLUDED - - -/** - * Address alignment of the individual FPGA bytes. - * The address arrangement of the individual bytes of the FPGA is two - * byte aligned at the embedded MK2 platform. - */ -#ifdef EXCITE_CCI_FPGA_MK2 -typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2))); -#else -typedef unsigned char excite_cci_fpga_align_t; -#endif - - -/** - * Size of Dual Ported RAM. - */ -#define EXCITE_DPR_SIZE 263 - - -/** - * Size of Reserved Status Fields in Dual Ported RAM. - */ -#define EXCITE_DPR_STATUS_SIZE 7 - - - -/** - * FPGA. - * Hardware register layout of the FPGA interface. The FPGA must accessed - * byte wise solely. - * @see EXCITE_CCI_DPR_MK2 - */ -typedef struct excite_fpga { - - /** - * Dual Ported RAM. - */ - excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE]; - - /** - * Status. - */ - excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE]; - -#ifdef EXCITE_CCI_FPGA_MK2 - /** - * RM9000 Interrupt. - * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite. - */ - excite_cci_fpga_align_t rm9k_int; -#else - /** - * MK2 Interrupt. - * Write access initiates interrupt at the ARM processor of the MK2. - */ - excite_cci_fpga_align_t mk2_int; - - excite_cci_fpga_align_t gap[0x1000-0x10f]; - - /** - * IRQ Source/Acknowledge. - */ - excite_cci_fpga_align_t rm9k_irq_src; - - /** - * IRQ Mask. - * Set bits enable the related interrupt. - */ - excite_cci_fpga_align_t rm9k_irq_mask; -#endif - - -} excite_fpga; - - - -#endif /* ndef EXCITE_FPGA_H_INCLUDED */ diff --git a/arch/mips/include/asm/mach-excite/excite_nandflash.h b/arch/mips/include/asm/mach-excite/excite_nandflash.h deleted file mode 100644 index c4cf6140622..00000000000 --- a/arch/mips/include/asm/mach-excite/excite_nandflash.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __EXCITE_NANDFLASH_H__ -#define __EXCITE_NANDFLASH_H__ - -/* Resource names */ -#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs" - -#endif /* __EXCITE_NANDFLASH_H__ */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_eth.h b/arch/mips/include/asm/mach-excite/rm9k_eth.h deleted file mode 100644 index 94705a46f72..00000000000 --- a/arch/mips/include/asm/mach-excite/rm9k_eth.h +++ /dev/null @@ -1,23 +0,0 @@ -#if !defined(__RM9K_ETH_H__) -#define __RM9K_ETH_H__ - -#define RM9K_GE_NAME "rm9k_ge" - -/* Resource names */ -#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac" -#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat" -#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc" -#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma" -#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx" -#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx" -#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx" -#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx" -#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy" -#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx" -#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx" -#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main" -#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy" -#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice" -#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel" - -#endif /* !defined(__RM9K_ETH_H__) */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/arch/mips/include/asm/mach-excite/rm9k_wdt.h deleted file mode 100644 index 3fa3c08d2da..00000000000 --- a/arch/mips/include/asm/mach-excite/rm9k_wdt.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __RM9K_WDT_H__ -#define __RM9K_WDT_H__ - -/* Device name */ -#define WDT_NAME "wdt_gpi" - -/* Resource names */ -#define WDT_RESOURCE_REGS "excite_watchdog_regs" -#define WDT_RESOURCE_IRQ "excite_watchdog_irq" -#define WDT_RESOURCE_COUNTER "excite_watchdog_counter" - -#endif /* __RM9K_WDT_H__ */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/arch/mips/include/asm/mach-excite/rm9k_xicap.h deleted file mode 100644 index 009577734a8..00000000000 --- a/arch/mips/include/asm/mach-excite/rm9k_xicap.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __EXCITE_XICAP_H__ -#define __EXCITE_XICAP_H__ - - -/* Resource names */ -#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx" -#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx" -#define XICAP_RESOURCE_XDMA "xicap_xdma" -#define XICAP_RESOURCE_DMADESC "xicap_dmadesc" -#define XICAP_RESOURCE_PKTPROC "xicap_pktproc" -#define XICAP_RESOURCE_IRQ "xicap_irq" -#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice" -#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks" -#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream" - -#endif /* __EXCITE_XICAP_H__ */ diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h new file mode 100644 index 00000000000..021f77ca59e --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h @@ -0,0 +1,305 @@ +/* + * The header file of cs5536 sourth bridge. + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu <liujl@lemote.com> + */ + +#ifndef _CS5536_H +#define _CS5536_H + +#include <linux/types.h> + +extern void _rdmsr(u32 msr, u32 *hi, u32 *lo); +extern void _wrmsr(u32 msr, u32 hi, u32 lo); + +/* + * MSR module base + */ +#define CS5536_SB_MSR_BASE (0x00000000) +#define CS5536_GLIU_MSR_BASE (0x10000000) +#define CS5536_ILLEGAL_MSR_BASE (0x20000000) +#define CS5536_USB_MSR_BASE (0x40000000) +#define CS5536_IDE_MSR_BASE (0x60000000) +#define CS5536_DIVIL_MSR_BASE (0x80000000) +#define CS5536_ACC_MSR_BASE (0xa0000000) +#define CS5536_UNUSED_MSR_BASE (0xc0000000) +#define CS5536_GLCP_MSR_BASE (0xe0000000) + +#define SB_MSR_REG(offset) (CS5536_SB_MSR_BASE | (offset)) +#define GLIU_MSR_REG(offset) (CS5536_GLIU_MSR_BASE | (offset)) +#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset)) +#define USB_MSR_REG(offset) (CS5536_USB_MSR_BASE | (offset)) +#define IDE_MSR_REG(offset) (CS5536_IDE_MSR_BASE | (offset)) +#define DIVIL_MSR_REG(offset) (CS5536_DIVIL_MSR_BASE | (offset)) +#define ACC_MSR_REG(offset) (CS5536_ACC_MSR_BASE | (offset)) +#define UNUSED_MSR_REG(offset) (CS5536_UNUSED_MSR_BASE | (offset)) +#define GLCP_MSR_REG(offset) (CS5536_GLCP_MSR_BASE | (offset)) + +/* + * BAR SPACE OF VIRTUAL PCI : + * range for pci probe use, length is the actual size. + */ +/* IO space for all DIVIL modules */ +#define CS5536_IRQ_RANGE 0xffffffe0 /* USERD FOR PCI PROBE */ +#define CS5536_IRQ_LENGTH 0x20 /* THE REGS ACTUAL LENGTH */ +#define CS5536_SMB_RANGE 0xfffffff8 +#define CS5536_SMB_LENGTH 0x08 +#define CS5536_GPIO_RANGE 0xffffff00 +#define CS5536_GPIO_LENGTH 0x100 +#define CS5536_MFGPT_RANGE 0xffffffc0 +#define CS5536_MFGPT_LENGTH 0x40 +#define CS5536_ACPI_RANGE 0xffffffe0 +#define CS5536_ACPI_LENGTH 0x20 +#define CS5536_PMS_RANGE 0xffffff80 +#define CS5536_PMS_LENGTH 0x80 +/* IO space for IDE */ +#define CS5536_IDE_RANGE 0xfffffff0 +#define CS5536_IDE_LENGTH 0x10 +/* IO space for ACC */ +#define CS5536_ACC_RANGE 0xffffff80 +#define CS5536_ACC_LENGTH 0x80 +/* MEM space for ALL USB modules */ +#define CS5536_OHCI_RANGE 0xfffff000 +#define CS5536_OHCI_LENGTH 0x1000 +#define CS5536_EHCI_RANGE 0xfffff000 +#define CS5536_EHCI_LENGTH 0x1000 + +/* + * PCI MSR ACCESS + */ +#define PCI_MSR_CTRL 0xF0 +#define PCI_MSR_ADDR 0xF4 +#define PCI_MSR_DATA_LO 0xF8 +#define PCI_MSR_DATA_HI 0xFC + +/**************** MSR *****************************/ + +/* + * GLIU STANDARD MSR + */ +#define GLIU_CAP 0x00 +#define GLIU_CONFIG 0x01 +#define GLIU_SMI 0x02 +#define GLIU_ERROR 0x03 +#define GLIU_PM 0x04 +#define GLIU_DIAG 0x05 + +/* + * GLIU SPEC. MSR + */ +#define GLIU_P2D_BM0 0x20 +#define GLIU_P2D_BM1 0x21 +#define GLIU_P2D_BM2 0x22 +#define GLIU_P2D_BMK0 0x23 +#define GLIU_P2D_BMK1 0x24 +#define GLIU_P2D_BM3 0x25 +#define GLIU_P2D_BM4 0x26 +#define GLIU_COH 0x80 +#define GLIU_PAE 0x81 +#define GLIU_ARB 0x82 +#define GLIU_ASMI 0x83 +#define GLIU_AERR 0x84 +#define GLIU_DEBUG 0x85 +#define GLIU_PHY_CAP 0x86 +#define GLIU_NOUT_RESP 0x87 +#define GLIU_NOUT_WDATA 0x88 +#define GLIU_WHOAMI 0x8B +#define GLIU_SLV_DIS 0x8C +#define GLIU_IOD_BM0 0xE0 +#define GLIU_IOD_BM1 0xE1 +#define GLIU_IOD_BM2 0xE2 +#define GLIU_IOD_BM3 0xE3 +#define GLIU_IOD_BM4 0xE4 +#define GLIU_IOD_BM5 0xE5 +#define GLIU_IOD_BM6 0xE6 +#define GLIU_IOD_BM7 0xE7 +#define GLIU_IOD_BM8 0xE8 +#define GLIU_IOD_BM9 0xE9 +#define GLIU_IOD_SC0 0xEA +#define GLIU_IOD_SC1 0xEB +#define GLIU_IOD_SC2 0xEC +#define GLIU_IOD_SC3 0xED +#define GLIU_IOD_SC4 0xEE +#define GLIU_IOD_SC5 0xEF +#define GLIU_IOD_SC6 0xF0 +#define GLIU_IOD_SC7 0xF1 + +/* + * SB STANDARD + */ +#define SB_CAP 0x00 +#define SB_CONFIG 0x01 +#define SB_SMI 0x02 +#define SB_ERROR 0x03 +#define SB_MAR_ERR_EN 0x00000001 +#define SB_TAR_ERR_EN 0x00000002 +#define SB_RSVD_BIT1 0x00000004 +#define SB_EXCEP_ERR_EN 0x00000008 +#define SB_SYSE_ERR_EN 0x00000010 +#define SB_PARE_ERR_EN 0x00000020 +#define SB_TAS_ERR_EN 0x00000040 +#define SB_MAR_ERR_FLAG 0x00010000 +#define SB_TAR_ERR_FLAG 0x00020000 +#define SB_RSVD_BIT2 0x00040000 +#define SB_EXCEP_ERR_FLAG 0x00080000 +#define SB_SYSE_ERR_FLAG 0x00100000 +#define SB_PARE_ERR_FLAG 0x00200000 +#define SB_TAS_ERR_FLAG 0x00400000 +#define SB_PM 0x04 +#define SB_DIAG 0x05 + +/* + * SB SPEC. + */ +#define SB_CTRL 0x10 +#define SB_R0 0x20 +#define SB_R1 0x21 +#define SB_R2 0x22 +#define SB_R3 0x23 +#define SB_R4 0x24 +#define SB_R5 0x25 +#define SB_R6 0x26 +#define SB_R7 0x27 +#define SB_R8 0x28 +#define SB_R9 0x29 +#define SB_R10 0x2A +#define SB_R11 0x2B +#define SB_R12 0x2C +#define SB_R13 0x2D +#define SB_R14 0x2E +#define SB_R15 0x2F + +/* + * GLCP STANDARD + */ +#define GLCP_CAP 0x00 +#define GLCP_CONFIG 0x01 +#define GLCP_SMI 0x02 +#define GLCP_ERROR 0x03 +#define GLCP_PM 0x04 +#define GLCP_DIAG 0x05 + +/* + * GLCP SPEC. + */ +#define GLCP_CLK_DIS_DELAY 0x08 +#define GLCP_PM_CLK_DISABLE 0x09 +#define GLCP_GLB_PM 0x0B +#define GLCP_DBG_OUT 0x0C +#define GLCP_RSVD1 0x0D +#define GLCP_SOFT_COM 0x0E +#define SOFT_BAR_SMB_FLAG 0x00000001 +#define SOFT_BAR_GPIO_FLAG 0x00000002 +#define SOFT_BAR_MFGPT_FLAG 0x00000004 +#define SOFT_BAR_IRQ_FLAG 0x00000008 +#define SOFT_BAR_PMS_FLAG 0x00000010 +#define SOFT_BAR_ACPI_FLAG 0x00000020 +#define SOFT_BAR_IDE_FLAG 0x00000400 +#define SOFT_BAR_ACC_FLAG 0x00000800 +#define SOFT_BAR_OHCI_FLAG 0x00001000 +#define SOFT_BAR_EHCI_FLAG 0x00002000 +#define GLCP_RSVD2 0x0F +#define GLCP_CLK_OFF 0x10 +#define GLCP_CLK_ACTIVE 0x11 +#define GLCP_CLK_DISABLE 0x12 +#define GLCP_CLK4ACK 0x13 +#define GLCP_SYS_RST 0x14 +#define GLCP_RSVD3 0x15 +#define GLCP_DBG_CLK_CTRL 0x16 +#define GLCP_CHIP_REV_ID 0x17 + +/* PIC */ +#define PIC_YSEL_LOW 0x20 +#define PIC_YSEL_LOW_USB_SHIFT 8 +#define PIC_YSEL_LOW_ACC_SHIFT 16 +#define PIC_YSEL_LOW_FLASH_SHIFT 24 +#define PIC_YSEL_HIGH 0x21 +#define PIC_ZSEL_LOW 0x22 +#define PIC_ZSEL_HIGH 0x23 +#define PIC_IRQM_PRIM 0x24 +#define PIC_IRQM_LPC 0x25 +#define PIC_XIRR_STS_LOW 0x26 +#define PIC_XIRR_STS_HIGH 0x27 +#define PCI_SHDW 0x34 + +/* + * DIVIL STANDARD + */ +#define DIVIL_CAP 0x00 +#define DIVIL_CONFIG 0x01 +#define DIVIL_SMI 0x02 +#define DIVIL_ERROR 0x03 +#define DIVIL_PM 0x04 +#define DIVIL_DIAG 0x05 + +/* + * DIVIL SPEC. + */ +#define DIVIL_LBAR_IRQ 0x08 +#define DIVIL_LBAR_KEL 0x09 +#define DIVIL_LBAR_SMB 0x0B +#define DIVIL_LBAR_GPIO 0x0C +#define DIVIL_LBAR_MFGPT 0x0D +#define DIVIL_LBAR_ACPI 0x0E +#define DIVIL_LBAR_PMS 0x0F +#define DIVIL_LEG_IO 0x14 +#define DIVIL_BALL_OPTS 0x15 +#define DIVIL_SOFT_IRQ 0x16 +#define DIVIL_SOFT_RESET 0x17 + +/* MFGPT */ +#define MFGPT_IRQ 0x28 + +/* + * IDE STANDARD + */ +#define IDE_CAP 0x00 +#define IDE_CONFIG 0x01 +#define IDE_SMI 0x02 +#define IDE_ERROR 0x03 +#define IDE_PM 0x04 +#define IDE_DIAG 0x05 + +/* + * IDE SPEC. + */ +#define IDE_IO_BAR 0x08 +#define IDE_CFG 0x10 +#define IDE_DTC 0x12 +#define IDE_CAST 0x13 +#define IDE_ETC 0x14 +#define IDE_INTERNAL_PM 0x15 + +/* + * ACC STANDARD + */ +#define ACC_CAP 0x00 +#define ACC_CONFIG 0x01 +#define ACC_SMI 0x02 +#define ACC_ERROR 0x03 +#define ACC_PM 0x04 +#define ACC_DIAG 0x05 + +/* + * USB STANDARD + */ +#define USB_CAP 0x00 +#define USB_CONFIG 0x01 +#define USB_SMI 0x02 +#define USB_ERROR 0x03 +#define USB_PM 0x04 +#define USB_DIAG 0x05 + +/* + * USB SPEC. + */ +#define USB_OHCI 0x08 +#define USB_EHCI 0x09 + +/****************** NATIVE ***************************/ +/* GPIO : I/O SPACE; REG : 32BITS */ +#define GPIOL_OUT_VAL 0x00 +#define GPIOL_OUT_EN 0x04 + +#endif /* _CS5536_H */ diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h new file mode 100644 index 00000000000..4b493d6772c --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h @@ -0,0 +1,35 @@ +/* + * cs5536 mfgpt header file + */ + +#ifndef _CS5536_MFGPT_H +#define _CS5536_MFGPT_H + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +#ifdef CONFIG_CS5536_MFGPT +extern void setup_mfgpt0_timer(void); +extern void disable_mfgpt0_counter(void); +extern void enable_mfgpt0_counter(void); +#else +static inline void __maybe_unused setup_mfgpt0_timer(void) +{ +} +static inline void __maybe_unused disable_mfgpt0_counter(void) +{ +} +static inline void __maybe_unused enable_mfgpt0_counter(void) +{ +} +#endif + +#define MFGPT_TICK_RATE 14318000 +#define COMPARE ((MFGPT_TICK_RATE + HZ/2) / HZ) + +#define MFGPT_BASE mfgpt_base +#define MFGPT0_CMP2 (MFGPT_BASE + 2) +#define MFGPT0_CNT (MFGPT_BASE + 4) +#define MFGPT0_SETUP (MFGPT_BASE + 6) + +#endif /*!_CS5536_MFGPT_H */ diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h new file mode 100644 index 00000000000..0dca9c89ee7 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h @@ -0,0 +1,153 @@ +/* + * the definition file of cs5536 Virtual Support Module(VSM). + * pci configuration space can be accessed through the VSM, so + * there is no need of the MSR read/write now, except the spec. + * MSR registers which are not implemented yet. + * + * Copyright (C) 2007 Lemote Inc. + * Author : jlliu, liujl@lemote.com + */ + +#ifndef _CS5536_PCI_H +#define _CS5536_PCI_H + +#include <linux/types.h> +#include <linux/pci_regs.h> + +extern void cs5536_pci_conf_write4(int function, int reg, u32 value); +extern u32 cs5536_pci_conf_read4(int function, int reg); + +#define CS5536_ACC_INTR 9 +#define CS5536_IDE_INTR 14 +#define CS5536_USB_INTR 11 +#define CS5536_MFGPT_INTR 5 +#define CS5536_UART1_INTR 4 +#define CS5536_UART2_INTR 3 + +/************** PCI BUS DEVICE FUNCTION ***************/ + +/* + * PCI bus device function + */ +#define PCI_BUS_CS5536 0 +#define PCI_IDSEL_CS5536 14 + +/********** STANDARD PCI-2.2 EXPANSION ****************/ + +/* + * PCI configuration space + * we have to virtualize the PCI configure space head, so we should + * define the necessary IDs and some others. + */ + +/* CONFIG of PCI VENDOR ID*/ +#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \ + (((mod_dev_id) << 16) | (sys_vendor_id)) + +/* VENDOR ID */ +#define CS5536_VENDOR_ID 0x1022 + +/* DEVICE ID */ +#define CS5536_ISA_DEVICE_ID 0x2090 +#define CS5536_IDE_DEVICE_ID 0x209a +#define CS5536_ACC_DEVICE_ID 0x2093 +#define CS5536_OHCI_DEVICE_ID 0x2094 +#define CS5536_EHCI_DEVICE_ID 0x2095 + +/* CLASS CODE : CLASS SUB-CLASS INTERFACE */ +#define CS5536_ISA_CLASS_CODE 0x060100 +#define CS5536_IDE_CLASS_CODE 0x010180 +#define CS5536_ACC_CLASS_CODE 0x040100 +#define CS5536_OHCI_CLASS_CODE 0x0C0310 +#define CS5536_EHCI_CLASS_CODE 0x0C0320 + +/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */ + +#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer) \ + ((PCI_NONE_BIST << 24) | ((header_type) << 16) \ + | ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE); + +#define PCI_NONE_BIST 0x00 /* RO not implemented yet. */ +#define PCI_BRIDGE_HEADER_TYPE 0x80 /* RO */ +#define PCI_NORMAL_HEADER_TYPE 0x00 +#define PCI_NORMAL_LATENCY_TIMER 0x00 +#define PCI_NORMAL_CACHE_LINE_SIZE 0x08 /* RW */ + +/* BAR */ +#define PCI_BAR0_REG 0x10 +#define PCI_BAR1_REG 0x14 +#define PCI_BAR2_REG 0x18 +#define PCI_BAR3_REG 0x1c +#define PCI_BAR4_REG 0x20 +#define PCI_BAR5_REG 0x24 +#define PCI_BAR_COUNT 6 +#define PCI_BAR_RANGE_MASK 0xFFFFFFFF + +/* CARDBUS CIS POINTER */ +#define PCI_CARDBUS_CIS_POINTER 0x00000000 + +/* SUBSYSTEM VENDOR ID */ +#define CS5536_SUB_VENDOR_ID CS5536_VENDOR_ID + +/* SUBSYSTEM ID */ +#define CS5536_ISA_SUB_ID CS5536_ISA_DEVICE_ID +#define CS5536_IDE_SUB_ID CS5536_IDE_DEVICE_ID +#define CS5536_ACC_SUB_ID CS5536_ACC_DEVICE_ID +#define CS5536_OHCI_SUB_ID CS5536_OHCI_DEVICE_ID +#define CS5536_EHCI_SUB_ID CS5536_EHCI_DEVICE_ID + +/* EXPANSION ROM BAR */ +#define PCI_EXPANSION_ROM_BAR 0x00000000 + +/* CAPABILITIES POINTER */ +#define PCI_CAPLIST_POINTER 0x00000000 +#define PCI_CAPLIST_USB_POINTER 0x40 +/* INTERRUPT */ + +#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \ + ((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \ + ((pin) << 8) | (mod_intr)) + +#define PCI_MAX_LATENCY 0x40 +#define PCI_MIN_GRANT 0x00 +#define PCI_DEFAULT_PIN 0x01 + +/*********** EXPANSION PCI REG ************************/ + +/* + * ISA EXPANSION + */ +#define PCI_UART1_INT_REG 0x50 +#define PCI_UART2_INT_REG 0x54 +#define PCI_ISA_FIXUP_REG 0x58 + +/* + * IDE EXPANSION + */ +#define PCI_IDE_CFG_REG 0x40 +#define CS5536_IDE_FLASH_SIGNATURE 0xDEADBEEF +#define PCI_IDE_DTC_REG 0x48 +#define PCI_IDE_CAST_REG 0x4C +#define PCI_IDE_ETC_REG 0x50 +#define PCI_IDE_PM_REG 0x54 +#define PCI_IDE_INT_REG 0x60 + +/* + * ACC EXPANSION + */ +#define PCI_ACC_INT_REG 0x50 + +/* + * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI + */ +#define PCI_OHCI_PM_REG 0x40 +#define PCI_OHCI_INT_REG 0x50 + +/* + * EHCI EXPANSION + */ +#define PCI_EHCI_LEGSMIEN_REG 0x50 +#define PCI_EHCI_LEGSMISTS_REG 0x54 +#define PCI_EHCI_FLADJ_REG 0x60 + +#endif /* _CS5536_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h new file mode 100644 index 00000000000..6305bea7e18 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h @@ -0,0 +1,31 @@ +/* + * the read/write interfaces for Virtual Support Module(VSM) + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin <wuzj@lemote.com> + */ + +#ifndef _CS5536_VSM_H +#define _CS5536_VSM_H + +#include <linux/types.h> + +typedef void (*cs5536_pci_vsm_write)(int reg, u32 value); +typedef u32 (*cs5536_pci_vsm_read)(int reg); + +#define DECLARE_CS5536_MODULE(name) \ +extern void pci_##name##_write_reg(int reg, u32 value); \ +extern u32 pci_##name##_read_reg(int reg); + +/* ide module */ +DECLARE_CS5536_MODULE(ide) +/* acc module */ +DECLARE_CS5536_MODULE(acc) +/* ohci module */ +DECLARE_CS5536_MODULE(ohci) +/* isa module */ +DECLARE_CS5536_MODULE(isa) +/* ehci module */ +DECLARE_CS5536_MODULE(ehci) + +#endif /* _CS5536_VSM_H */ diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h index 71a6851ba83..981c75f91a7 100644 --- a/arch/mips/include/asm/mach-loongson/dma-coherence.h +++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h @@ -28,7 +28,11 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, static inline unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr) { +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) + return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff); +#else return dma_addr & 0x7fffffff; +#endif } static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index da70bcf2304..ee8bc837697 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin <wuzj@lemote.com> * * This program is free software; you can redistribute it and/or modify it @@ -15,9 +15,6 @@ #include <linux/io.h> #include <linux/init.h> -/* there is an internal bonito64-compatiable northbridge in loongson2e/2f */ -#include <asm/mips-boards/bonito64.h> - /* loongson internal northbridge initialization */ extern void bonito_irq_init(void); @@ -32,7 +29,19 @@ extern unsigned long memsize, highmemsize; /* loongson-specific command line, env and memory initialization */ extern void __init prom_init_memory(void); extern void __init prom_init_cmdline(void); +extern void __init prom_init_machtype(void); extern void __init prom_init_env(void); +#ifdef CONFIG_LOONGSON_UART_BASE +extern unsigned long _loongson_uart_base, loongson_uart_base; +extern void prom_init_loongson_uart_base(void); +#endif + +static inline void prom_init_uart_base(void) +{ +#ifdef CONFIG_LOONGSON_UART_BASE + prom_init_loongson_uart_base(); +#endif +} /* irq operation functions */ extern void bonito_irqdispatch(void); @@ -40,25 +49,276 @@ extern void __init bonito_irq_init(void); extern void __init set_irq_trigger_mode(void); extern void __init mach_init_irq(void); extern void mach_irq_dispatch(unsigned int pending); +extern int mach_i8259_irq(void); + +/* We need this in some places... */ +#define delay() ({ \ + int x; \ + for (x = 0; x < 100000; x++) \ + __asm__ __volatile__(""); \ +}) + +#define LOONGSON_REG(x) \ + (*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x))) + +#define LOONGSON_IRQ_BASE 32 +#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ + +#define LOONGSON_FLASH_BASE 0x1c000000 +#define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */ +#define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1) + +#define LOONGSON_LIO0_BASE 0x1e000000 +#define LOONGSON_LIO0_SIZE 0x01C00000 /* 28M */ +#define LOONGSON_LIO0_TOP (LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1) + +#define LOONGSON_BOOT_BASE 0x1fc00000 +#define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */ +#define LOONGSON_BOOT_TOP (LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1) +#define LOONGSON_REG_BASE 0x1fe00000 +#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */ +#define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1) + +#define LOONGSON_LIO1_BASE 0x1ff00000 +#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */ +#define LOONGSON_LIO1_TOP (LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1) + +#define LOONGSON_PCILO0_BASE 0x10000000 +#define LOONGSON_PCILO1_BASE 0x14000000 +#define LOONGSON_PCILO2_BASE 0x18000000 +#define LOONGSON_PCILO_BASE LOONGSON_PCILO0_BASE +#define LOONGSON_PCILO_SIZE 0x0c000000 /* 64M * 3 */ +#define LOONGSON_PCILO_TOP (LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1) + +#define LOONGSON_PCICFG_BASE 0x1fe80000 +#define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */ +#define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1) +#define LOONGSON_PCIIO_BASE 0x1fd00000 +#define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */ +#define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1) + +/* Loongson Register Bases */ + +#define LOONGSON_PCICONFIGBASE 0x00 +#define LOONGSON_REGBASE 0x100 /* PCI Configuration Registers */ -#define LOONGSON_PCI_ISR4C BONITO_PCI_REG(0x4c) + +#define LOONGSON_PCI_REG(x) LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x)) +#define LOONGSON_PCIDID LOONGSON_PCI_REG(0x00) +#define LOONGSON_PCICMD LOONGSON_PCI_REG(0x04) +#define LOONGSON_PCICLASS LOONGSON_PCI_REG(0x08) +#define LOONGSON_PCILTIMER LOONGSON_PCI_REG(0x0c) +#define LOONGSON_PCIBASE0 LOONGSON_PCI_REG(0x10) +#define LOONGSON_PCIBASE1 LOONGSON_PCI_REG(0x14) +#define LOONGSON_PCIBASE2 LOONGSON_PCI_REG(0x18) +#define LOONGSON_PCIBASE3 LOONGSON_PCI_REG(0x1c) +#define LOONGSON_PCIBASE4 LOONGSON_PCI_REG(0x20) +#define LOONGSON_PCIEXPRBASE LOONGSON_PCI_REG(0x30) +#define LOONGSON_PCIINT LOONGSON_PCI_REG(0x3c) + +#define LOONGSON_PCI_ISR4C LOONGSON_PCI_REG(0x4c) + +#define LOONGSON_PCICMD_PERR_CLR 0x80000000 +#define LOONGSON_PCICMD_SERR_CLR 0x40000000 +#define LOONGSON_PCICMD_MABORT_CLR 0x20000000 +#define LOONGSON_PCICMD_MTABORT_CLR 0x10000000 +#define LOONGSON_PCICMD_TABORT_CLR 0x08000000 +#define LOONGSON_PCICMD_MPERR_CLR 0x01000000 +#define LOONGSON_PCICMD_PERRRESPEN 0x00000040 +#define LOONGSON_PCICMD_ASTEPEN 0x00000080 +#define LOONGSON_PCICMD_SERREN 0x00000100 +#define LOONGSON_PCILTIMER_BUSLATENCY 0x0000ff00 +#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT 8 + +/* Loongson h/w Configuration */ + +#define LOONGSON_GENCFG_OFFSET 0x4 +#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET) + +#define LOONGSON_GENCFG_DEBUGMODE 0x00000001 +#define LOONGSON_GENCFG_SNOOPEN 0x00000002 +#define LOONGSON_GENCFG_CPUSELFRESET 0x00000004 + +#define LOONGSON_GENCFG_FORCE_IRQA 0x00000008 +#define LOONGSON_GENCFG_IRQA_ISOUT 0x00000010 +#define LOONGSON_GENCFG_IRQA_FROM_INT1 0x00000020 +#define LOONGSON_GENCFG_BYTESWAP 0x00000040 + +#define LOONGSON_GENCFG_UNCACHED 0x00000080 +#define LOONGSON_GENCFG_PREFETCHEN 0x00000100 +#define LOONGSON_GENCFG_WBEHINDEN 0x00000200 +#define LOONGSON_GENCFG_CACHEALG 0x00000c00 +#define LOONGSON_GENCFG_CACHEALG_SHIFT 10 +#define LOONGSON_GENCFG_PCIQUEUE 0x00001000 +#define LOONGSON_GENCFG_CACHESTOP 0x00002000 +#define LOONGSON_GENCFG_MSTRBYTESWAP 0x00004000 +#define LOONGSON_GENCFG_BUSERREN 0x00008000 +#define LOONGSON_GENCFG_NORETRYTIMEOUT 0x00010000 +#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT 0x00020000 + +/* PCI address map control */ + +#define LOONGSON_PCIMAP LOONGSON_REG(LOONGSON_REGBASE + 0x10) +#define LOONGSON_PCIMEMBASECFG LOONGSON_REG(LOONGSON_REGBASE + 0x14) +#define LOONGSON_PCIMAP_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x18) + +/* GPIO Regs - r/w */ + +#define LOONGSON_GPIODATA LOONGSON_REG(LOONGSON_REGBASE + 0x1c) +#define LOONGSON_GPIOIE LOONGSON_REG(LOONGSON_REGBASE + 0x20) + +/* ICU Configuration Regs - r/w */ + +#define LOONGSON_INTEDGE LOONGSON_REG(LOONGSON_REGBASE + 0x24) +#define LOONGSON_INTSTEER LOONGSON_REG(LOONGSON_REGBASE + 0x28) +#define LOONGSON_INTPOL LOONGSON_REG(LOONGSON_REGBASE + 0x2c) + +/* ICU Enable Regs - IntEn & IntISR are r/o. */ + +#define LOONGSON_INTENSET LOONGSON_REG(LOONGSON_REGBASE + 0x30) +#define LOONGSON_INTENCLR LOONGSON_REG(LOONGSON_REGBASE + 0x34) +#define LOONGSON_INTEN LOONGSON_REG(LOONGSON_REGBASE + 0x38) +#define LOONGSON_INTISR LOONGSON_REG(LOONGSON_REGBASE + 0x3c) + +/* ICU */ +#define LOONGSON_ICU_MBOXES 0x0000000f +#define LOONGSON_ICU_MBOXES_SHIFT 0 +#define LOONGSON_ICU_DMARDY 0x00000010 +#define LOONGSON_ICU_DMAEMPTY 0x00000020 +#define LOONGSON_ICU_COPYRDY 0x00000040 +#define LOONGSON_ICU_COPYEMPTY 0x00000080 +#define LOONGSON_ICU_COPYERR 0x00000100 +#define LOONGSON_ICU_PCIIRQ 0x00000200 +#define LOONGSON_ICU_MASTERERR 0x00000400 +#define LOONGSON_ICU_SYSTEMERR 0x00000800 +#define LOONGSON_ICU_DRAMPERR 0x00001000 +#define LOONGSON_ICU_RETRYERR 0x00002000 +#define LOONGSON_ICU_GPIOS 0x01ff0000 +#define LOONGSON_ICU_GPIOS_SHIFT 16 +#define LOONGSON_ICU_GPINS 0x7e000000 +#define LOONGSON_ICU_GPINS_SHIFT 25 +#define LOONGSON_ICU_MBOX(N) (1<<(LOONGSON_ICU_MBOXES_SHIFT+(N))) +#define LOONGSON_ICU_GPIO(N) (1<<(LOONGSON_ICU_GPIOS_SHIFT+(N))) +#define LOONGSON_ICU_GPIN(N) (1<<(LOONGSON_ICU_GPINS_SHIFT+(N))) + +/* PCI prefetch window base & mask */ + +#define LOONGSON_MEM_WIN_BASE_L LOONGSON_REG(LOONGSON_REGBASE + 0x40) +#define LOONGSON_MEM_WIN_BASE_H LOONGSON_REG(LOONGSON_REGBASE + 0x44) +#define LOONGSON_MEM_WIN_MASK_L LOONGSON_REG(LOONGSON_REGBASE + 0x48) +#define LOONGSON_MEM_WIN_MASK_H LOONGSON_REG(LOONGSON_REGBASE + 0x4c) /* PCI_Hit*_Sel_* */ -#define LOONGSON_PCI_HIT0_SEL_L BONITO(BONITO_REGBASE + 0x50) -#define LOONGSON_PCI_HIT0_SEL_H BONITO(BONITO_REGBASE + 0x54) -#define LOONGSON_PCI_HIT1_SEL_L BONITO(BONITO_REGBASE + 0x58) -#define LOONGSON_PCI_HIT1_SEL_H BONITO(BONITO_REGBASE + 0x5c) -#define LOONGSON_PCI_HIT2_SEL_L BONITO(BONITO_REGBASE + 0x60) -#define LOONGSON_PCI_HIT2_SEL_H BONITO(BONITO_REGBASE + 0x64) +#define LOONGSON_PCI_HIT0_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x50) +#define LOONGSON_PCI_HIT0_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x54) +#define LOONGSON_PCI_HIT1_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x58) +#define LOONGSON_PCI_HIT1_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x5c) +#define LOONGSON_PCI_HIT2_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x60) +#define LOONGSON_PCI_HIT2_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x64) /* PXArb Config & Status */ -#define LOONGSON_PXARB_CFG BONITO(BONITO_REGBASE + 0x68) -#define LOONGSON_PXARB_STATUS BONITO(BONITO_REGBASE + 0x6c) +#define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68) +#define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c) + +/* pcimap */ + +#define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f +#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT 0 +#define LOONGSON_PCIMAP_PCIMAP_LO1 0x00000fc0 +#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT 6 +#define LOONGSON_PCIMAP_PCIMAP_LO2 0x0003f000 +#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT 12 +#define LOONGSON_PCIMAP_PCIMAP_2 0x00040000 +#define LOONGSON_PCIMAP_WIN(WIN, ADDR) \ + ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) + +#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ +#include <linux/cpufreq.h> +extern void loongson2_cpu_wait(void); +extern struct cpufreq_frequency_table loongson2_clockmod_table[]; + +/* Chip Config */ +#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80) +#endif + +/* + * address windows configuration module + * + * loongson2e do not have this module + */ +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + +/* address window config module base address */ +#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul +#define LOONGSON_ADDRWINCFG_SIZE 0x180 + +extern unsigned long _loongson_addrwincfg_base; +#define LOONGSON_ADDRWINCFG(offset) \ + (*(volatile u64 *)(_loongson_addrwincfg_base + (offset))) + +#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00) +#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08) +#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10) +#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18) + +#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20) +#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28) +#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30) +#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38) + +#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40) +#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48) +#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50) +#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58) + +#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60) +#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68) +#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70) +#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78) + +#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80) +#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88) +#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90) +#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98) + +#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0) +#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8) +#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0) +#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8) + +#define ADDRWIN_WIN0 0 +#define ADDRWIN_WIN1 1 +#define ADDRWIN_WIN2 2 +#define ADDRWIN_WIN3 3 + +#define ADDRWIN_MAP_DST_DDR 0 +#define ADDRWIN_MAP_DST_PCI 1 +#define ADDRWIN_MAP_DST_LIO 1 + +/* + * s: CPU, PCIDMA + * d: DDR, PCI, LIO + * win: 0, 1, 2, 3 + * src: map source + * dst: map destination + * size: ~mask + 1 + */ +#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ + s##_WIN##w##_BASE = (src); \ + s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \ + s##_WIN##w##_MASK = ~(size-1); \ +} while (0) + +#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size) +#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size) +#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size) -/* loongson2-specific perf counter IRQ */ -#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) +#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */ #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */ diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h index 206ea206791..acf8359cb13 100644 --- a/arch/mips/include/asm/mach-loongson/machine.h +++ b/arch/mips/include/asm/mach-loongson/machine.h @@ -13,10 +13,15 @@ #ifdef CONFIG_LEMOTE_FULOONG2E -#define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8) - #define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E #endif +/* use fuloong2f as the default machine of LEMOTE_MACH2F */ +#ifdef CONFIG_LEMOTE_MACH2F + +#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2F + +#endif + #endif /* __ASM_MACH_LOONGSON_MACHINE_H */ diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h index bd7b3cba7e3..e9960f341b9 100644 --- a/arch/mips/include/asm/mach-loongson/mem.h +++ b/arch/mips/include/asm/mach-loongson/mem.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin <wuzj@lemote.com> * * This program is free software; you can redistribute it and/or modify it @@ -12,19 +12,30 @@ #define __ASM_MACH_LOONGSON_MEM_H /* - * On Lemote Loongson 2e + * high memory space * - * the high memory space starts from 512M. - * the peripheral registers reside between 0x1000:0000 and 0x2000:0000. + * in loongson2e, starts from 512M + * in loongson2f, starts from 2G 256M */ +#ifdef CONFIG_CPU_LOONGSON2E +#define LOONGSON_HIGHMEM_START 0x20000000 +#else +#define LOONGSON_HIGHMEM_START 0x90000000 +#endif -#ifdef CONFIG_LEMOTE_FULOONG2E - -#define LOONGSON_HIGHMEM_START 0x20000000 +/* + * the peripheral registers(MMIO): + * + * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000. + * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000. + */ #define LOONGSON_MMIO_MEM_START 0x10000000 -#define LOONGSON_MMIO_MEM_END 0x20000000 +#ifdef CONFIG_CPU_LOONGSON2E +#define LOONGSON_MMIO_MEM_END 0x20000000 +#else +#define LOONGSON_MMIO_MEM_END 0x80000000 #endif #endif /* __ASM_MACH_LOONGSON_MEM_H */ diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h index f1663ca81da..a199a4f6de4 100644 --- a/arch/mips/include/asm/mach-loongson/pci.h +++ b/arch/mips/include/asm/mach-loongson/pci.h @@ -1,5 +1,6 @@ /* * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org> + * Copyright (c) 2009 Wu Zhangjin <wuzj@lemote.com> * * This program is free software; you can redistribute it * and/or modify it under the terms of the GNU General @@ -22,16 +23,39 @@ #ifndef __ASM_MACH_LOONGSON_PCI_H_ #define __ASM_MACH_LOONGSON_PCI_H_ -extern struct pci_ops bonito64_pci_ops; +extern struct pci_ops loongson_pci_ops; -#ifdef CONFIG_LEMOTE_FULOONG2E +/* this is an offset from mips_io_port_base */ +#define LOONGSON_PCI_IO_START 0x00004000UL + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + +/* + * we use address window2 to map cpu address space to pci space + * window2: cpu [1G, 2G] -> pci [1G, 2G] + * why not use window 0 & 1? because they are used by cpu when booting. + * window0: cpu [0, 256M] -> ddr [0, 256M] + * window1: cpu [256M, 512M] -> pci [256M, 512M] + */ + +/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */ +#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */ +#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC + +#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST +#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */ + +#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \ + LOONGSON_PCI_MEM_START + 1) + +#else /* loongson2f/32bit & loongson2e */ /* this pci memory space is mapped by pcimap in pci.c */ -#define LOONGSON_PCI_MEM_START BONITO_PCILO1_BASE -#define LOONGSON_PCI_MEM_END (BONITO_PCILO1_BASE + 0x04000000 * 2) +#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE +#define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2) /* this is an offset from mips_io_port_base */ #define LOONGSON_PCI_IO_START 0x00004000UL -#endif +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ #endif /* !__ASM_MACH_LOONGSON_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h new file mode 100644 index 00000000000..bcad43a93eb --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/asic.h @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_MACH_POWERTV_ASIC_H +#define _ASM_MACH_POWERTV_ASIC_H + +#include <linux/ioport.h> +#include <asm/mach-powertv/asic_regs.h> + +#define DVR_CAPABLE (1<<0) +#define PCIE_CAPABLE (1<<1) +#define FFS_CAPABLE (1<<2) +#define DISPLAY_CAPABLE (1<<3) + +/* Platform Family types + * For compitability, the new value must be added in the end */ +enum family_type { + FAMILY_8500, + FAMILY_8500RNG, + FAMILY_4500, + FAMILY_1500, + FAMILY_8600, + FAMILY_4600, + FAMILY_4600VZA, + FAMILY_8600VZB, + FAMILY_1500VZE, + FAMILY_1500VZF, + FAMILIES +}; + +/* Register maps for each ASIC */ +extern const struct register_map calliope_register_map; +extern const struct register_map cronus_register_map; +extern const struct register_map zeus_register_map; + +extern struct resource dvr_cronus_resources[]; +extern struct resource dvr_zeus_resources[]; +extern struct resource non_dvr_calliope_resources[]; +extern struct resource non_dvr_cronus_resources[]; +extern struct resource non_dvr_cronuslite_resources[]; +extern struct resource non_dvr_vz_calliope_resources[]; +extern struct resource non_dvr_vze_calliope_resources[]; +extern struct resource non_dvr_vzf_calliope_resources[]; +extern struct resource non_dvr_zeus_resources[]; + +extern void powertv_platform_init(void); +extern void platform_alloc_bootmem(void); +extern enum asic_type platform_get_asic(void); +extern enum family_type platform_get_family(void); +extern int platform_supports_dvr(void); +extern int platform_supports_ffs(void); +extern int platform_supports_pcie(void); +extern int platform_supports_display(void); +extern void configure_platform(void); +extern void platform_configure_usb_ehci(void); +extern void platform_unconfigure_usb_ehci(void); +extern void platform_configure_usb_ohci(void); +extern void platform_unconfigure_usb_ohci(void); + +/* Platform Resources */ +#define ASIC_RESOURCE_GET_EXISTS 1 +extern struct resource *asic_resource_get(const char *name); +extern void platform_release_memory(void *baddr, int size); + +/* Reboot Cause */ +extern void set_reboot_cause(char code, unsigned int data, unsigned int data2); +extern void set_locked_reboot_cause(char code, unsigned int data, + unsigned int data2); + +enum sys_reboot_type { + sys_unknown_reboot = 0x00, /* Unknown reboot cause */ + sys_davic_change = 0x01, /* Reboot due to change in DAVIC + * mode */ + sys_user_reboot = 0x02, /* Reboot initiated by user */ + sys_system_reboot = 0x03, /* Reboot initiated by OS */ + sys_trap_reboot = 0x04, /* Reboot due to a CPU trap */ + sys_silent_reboot = 0x05, /* Silent reboot */ + sys_boot_ldr_reboot = 0x06, /* Bootloader reboot */ + sys_power_up_reboot = 0x07, /* Power on bootup. Older + * drivers may report as + * userReboot. */ + sys_code_change = 0x08, /* Reboot to take code change. + * Older drivers may report as + * userReboot. */ + sys_hardware_reset = 0x09, /* HW watchdog or front-panel + * reset button reset. Older + * drivers may report as + * userReboot. */ + sys_watchdogInterrupt = 0x0A /* Pre-watchdog interrupt */ +}; + +#endif /* _ASM_MACH_POWERTV_ASIC_H */ diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h new file mode 100644 index 00000000000..9a65c93782f --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/asic_regs.h @@ -0,0 +1,155 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __ASM_MACH_POWERTV_ASIC_H_ +#define __ASM_MACH_POWERTV_ASIC_H_ +#include <linux/io.h> + +/* ASIC types */ +enum asic_type { + ASIC_UNKNOWN, + ASIC_ZEUS, + ASIC_CALLIOPE, + ASIC_CRONUS, + ASIC_CRONUSLITE, + ASICS +}; + +/* hardcoded values read from Chip Version registers */ +#define CRONUS_10 0x0B4C1C20 +#define CRONUS_11 0x0B4C1C21 +#define CRONUSLITE_10 0x0B4C1C40 + +#define NAND_FLASH_BASE 0x03000000 +#define ZEUS_IO_BASE 0x09000000 +#define CALLIOPE_IO_BASE 0x08000000 +#define CRONUS_IO_BASE 0x09000000 +#define ASIC_IO_SIZE 0x01000000 + +/* Definitions for backward compatibility */ +#define UART1_INTSTAT uart1_intstat +#define UART1_INTEN uart1_inten +#define UART1_CONFIG1 uart1_config1 +#define UART1_CONFIG2 uart1_config2 +#define UART1_DIVISORHI uart1_divisorhi +#define UART1_DIVISORLO uart1_divisorlo +#define UART1_DATA uart1_data +#define UART1_STATUS uart1_status + +/* ASIC register enumeration */ +struct register_map { + u32 eic_slow0_strt_add; + u32 eic_cfg_bits; + u32 eic_ready_status; + + u32 chipver3; + u32 chipver2; + u32 chipver1; + u32 chipver0; + + u32 uart1_intstat; + u32 uart1_inten; + u32 uart1_config1; + u32 uart1_config2; + u32 uart1_divisorhi; + u32 uart1_divisorlo; + u32 uart1_data; + u32 uart1_status; + + u32 int_stat_3; + u32 int_stat_2; + u32 int_stat_1; + u32 int_stat_0; + u32 int_config; + u32 int_int_scan; + u32 ien_int_3; + u32 ien_int_2; + u32 ien_int_1; + u32 ien_int_0; + u32 int_level_3_3; + u32 int_level_3_2; + u32 int_level_3_1; + u32 int_level_3_0; + u32 int_level_2_3; + u32 int_level_2_2; + u32 int_level_2_1; + u32 int_level_2_0; + u32 int_level_1_3; + u32 int_level_1_2; + u32 int_level_1_1; + u32 int_level_1_0; + u32 int_level_0_3; + u32 int_level_0_2; + u32 int_level_0_1; + u32 int_level_0_0; + u32 int_docsis_en; + + u32 mips_pll_setup; + u32 usb_fs; + u32 test_bus; + u32 crt_spare; + u32 usb2_ohci_int_mask; + u32 usb2_strap; + u32 ehci_hcapbase; + u32 ohci_hc_revision; + u32 bcm1_bs_lmi_steer; + u32 usb2_control; + u32 usb2_stbus_obc; + u32 usb2_stbus_mess_size; + u32 usb2_stbus_chunk_size; + + u32 pcie_regs; + u32 tim_ch; + u32 tim_cl; + u32 gpio_dout; + u32 gpio_din; + u32 gpio_dir; + u32 watchdog; + u32 front_panel; + + u32 register_maps; +}; + +extern enum asic_type asic; +extern const struct register_map *register_map; +extern unsigned long asic_phy_base; /* Physical address of ASIC */ +extern unsigned long asic_base; /* Virtual address of ASIC */ + +/* + * Macros to interface to registers through their ioremapped address + * asic_reg_offset Returns the offset of a given register from the start + * of the ASIC address space + * asic_reg_phys_addr Returns the physical address of the given register + * asic_reg_addr Returns the iomapped virtual address of the given + * register. + */ +#define asic_reg_offset(x) (register_map->x) +#define asic_reg_phys_addr(x) (asic_phy_base + asic_reg_offset(x)) +#define asic_reg_addr(x) \ + ((unsigned int *) (asic_base + asic_reg_offset(x))) + +/* + * The asic_reg macro is gone. It should be replaced by either asic_read or + * asic_write, as appropriate. + */ + +#define asic_read(x) readl(asic_reg_addr(x)) +#define asic_write(v, x) writel(v, asic_reg_addr(x)) + +extern void asic_irq_init(void); +#endif diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h new file mode 100644 index 00000000000..5b8d5ebeb83 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h @@ -0,0 +1,119 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Version from mach-generic modified to support PowerTV port + * Portions Copyright (C) 2009 Cisco Systems, Inc. + * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> + * + */ + +#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H +#define __ASM_MACH_POWERTV_DMA_COHERENCE_H + +#include <linux/sched.h> +#include <linux/version.h> +#include <linux/device.h> +#include <asm/mach-powertv/asic.h> + +static inline bool is_kseg2(void *addr) +{ + return (unsigned long)addr >= KSEG2; +} + +static inline unsigned long virt_to_phys_from_pte(void *addr) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *ptep, pte; + + unsigned long virt_addr = (unsigned long)addr; + unsigned long phys_addr = 0UL; + + /* get the page global directory. */ + pgd = pgd_offset_k(virt_addr); + + if (!pgd_none(*pgd)) { + /* get the page upper directory */ + pud = pud_offset(pgd, virt_addr); + if (!pud_none(*pud)) { + /* get the page middle directory */ + pmd = pmd_offset(pud, virt_addr); + if (!pmd_none(*pmd)) { + /* get a pointer to the page table entry */ + ptep = pte_offset(pmd, virt_addr); + pte = *ptep; + /* check for a valid page */ + if (pte_present(pte)) { + /* get the physical address the page is + * refering to */ + phys_addr = (unsigned long) + page_to_phys(pte_page(pte)); + /* add the offset within the page */ + phys_addr |= (virt_addr & ~PAGE_MASK); + } + } + } + } + + return phys_addr; +} + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + if (is_kseg2(addr)) + return phys_to_bus(virt_to_phys_from_pte(addr)); + else + return phys_to_bus(virt_to_phys(addr)); +} + +static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, + struct page *page) +{ + return phys_to_bus(page_to_phys(page)); +} + +static inline unsigned long plat_dma_addr_to_phys(struct device *dev, + dma_addr_t dma_addr) +{ + return bus_to_phys(dma_addr); +} + +static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) +{ +} + +static inline int plat_dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, + * so we can't guarantee allocations that must be + * within a tighter range than GFP_DMA.. + */ + if (mask < DMA_BIT_MASK(24)) + return 0; + + return 1; +} + +static inline void plat_extra_sync_for_device(struct device *dev) +{ + return; +} + +static inline int plat_dma_mapping_error(struct device *dev, + dma_addr_t dma_addr) +{ + return 0; +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h new file mode 100644 index 00000000000..629a5741365 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/interrupts.h @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_ +#define _ASM_MACH_POWERTV_INTERRUPTS_H_ + +/* + * Defines for all of the interrupt lines + */ + +/* Definitions for backward compatibility */ +#define kIrq_Uart1 irq_uart1 + +#define ibase 0 + +/*------------- Register: int_stat_3 */ +/* 126 unused (bit 31) */ +#define irq_asc2video (ibase+126) /* ASC 2 Video Interrupt */ +#define irq_asc1video (ibase+125) /* ASC 1 Video Interrupt */ +#define irq_comms_block_wd (ibase+124) /* ASC 1 Video Interrupt */ +#define irq_fdma_mailbox (ibase+123) /* FDMA Mailbox Output */ +#define irq_fdma_gp (ibase+122) /* FDMA GP Output */ +#define irq_mips_pic (ibase+121) /* MIPS Performance Counter + * Interrupt */ +#define irq_mips_timer (ibase+120) /* MIPS Timer Interrupt */ +#define irq_memory_protect (ibase+119) /* Memory Protection Interrupt + * -- Ored by glue logic inside + * SPARC ILC (see + * INT_MEM_PROT_STAT, below, + * for individual interrupts) + */ +/* 118 unused (bit 22) */ +#define irq_sbag (ibase+117) /* SBAG Interrupt -- Ored by + * glue logic inside SPARC ILC + * (see INT_SBAG_STAT, below, + * for individual interrupts) */ +#define irq_qam_b_fec (ibase+116) /* QAM B FEC Interrupt */ +#define irq_qam_a_fec (ibase+115) /* QAM A FEC Interrupt */ +/* 114 unused (bit 18) */ +#define irq_mailbox (ibase+113) /* Mailbox Debug Interrupt -- + * Ored by glue logic inside + * SPARC ILC (see + * INT_MAILBOX_STAT, below, for + * individual interrupts) */ +#define irq_fuse_stat1 (ibase+112) /* Fuse Status 1 */ +#define irq_fuse_stat2 (ibase+111) /* Fuse Status 2 */ +#define irq_fuse_stat3 (ibase+110) /* Blitter Interrupt / Fuse + * Status 3 */ +#define irq_blitter (ibase+110) /* Blitter Interrupt / Fuse + * Status 3 */ +#define irq_avc1_pp0 (ibase+109) /* AVC Decoder #1 PP0 + * Interrupt */ +#define irq_avc1_pp1 (ibase+108) /* AVC Decoder #1 PP1 + * Interrupt */ +#define irq_avc1_mbe (ibase+107) /* AVC Decoder #1 MBE + * Interrupt */ +#define irq_avc2_pp0 (ibase+106) /* AVC Decoder #2 PP0 + * Interrupt */ +#define irq_avc2_pp1 (ibase+105) /* AVC Decoder #2 PP1 + * Interrupt */ +#define irq_avc2_mbe (ibase+104) /* AVC Decoder #2 MBE + * Interrupt */ +#define irq_zbug_spi (ibase+103) /* Zbug SPI Slave Interrupt */ +#define irq_qam_mod2 (ibase+102) /* QAM Modulator 2 DMA + * Interrupt */ +#define irq_ir_rx (ibase+101) /* IR RX 2 Interrupt */ +#define irq_aud_dsp2 (ibase+100) /* Audio DSP #2 Interrupt */ +#define irq_aud_dsp1 (ibase+99) /* Audio DSP #1 Interrupt */ +#define irq_docsis (ibase+98) /* DOCSIS Debug Interrupt */ +#define irq_sd_dvp1 (ibase+97) /* SD DVP #1 Interrupt */ +#define irq_sd_dvp2 (ibase+96) /* SD DVP #2 Interrupt */ +/*------------- Register: int_stat_2 */ +#define irq_hd_dvp (ibase+95) /* HD DVP Interrupt */ +#define kIrq_Prewatchdog (ibase+94) /* watchdog Pre-Interrupt */ +#define irq_timer2 (ibase+93) /* Programmable Timer + * Interrupt 2 */ +#define irq_1394 (ibase+92) /* 1394 Firewire Interrupt */ +#define irq_usbohci (ibase+91) /* USB 2.0 OHCI Interrupt */ +#define irq_usbehci (ibase+90) /* USB 2.0 EHCI Interrupt */ +#define irq_pciexp (ibase+89) /* PCI Express 0 Interrupt */ +#define irq_pciexp0 (ibase+89) /* PCI Express 0 Interrupt */ +#define irq_afe1 (ibase+88) /* AFE 1 Interrupt */ +#define irq_sata (ibase+87) /* SATA 1 Interrupt */ +#define irq_sata1 (ibase+87) /* SATA 1 Interrupt */ +#define irq_dtcp (ibase+86) /* DTCP Interrupt */ +#define irq_pciexp1 (ibase+85) /* PCI Express 1 Interrupt */ +/* 84 unused (bit 20) */ +/* 83 unused (bit 19) */ +/* 82 unused (bit 18) */ +#define irq_sata2 (ibase+81) /* SATA2 Interrupt */ +#define irq_uart2 (ibase+80) /* UART2 Interrupt */ +#define irq_legacy_usb (ibase+79) /* Legacy USB Host ISR (1.1 + * Host module) */ +#define irq_pod (ibase+78) /* POD Interrupt */ +#define irq_slave_usb (ibase+77) /* Slave USB */ +#define irq_denc1 (ibase+76) /* DENC #1 VTG Interrupt */ +#define irq_vbi_vtg (ibase+75) /* VBI VTG Interrupt */ +#define irq_afe2 (ibase+74) /* AFE 2 Interrupt */ +#define irq_denc2 (ibase+73) /* DENC #2 VTG Interrupt */ +#define irq_asc2 (ibase+72) /* ASC #2 Interrupt */ +#define irq_asc1 (ibase+71) /* ASC #1 Interrupt */ +#define irq_mod_dma (ibase+70) /* Modulator DMA Interrupt */ +#define irq_byte_eng1 (ibase+69) /* Byte Engine Interrupt [1] */ +#define irq_byte_eng0 (ibase+68) /* Byte Engine Interrupt [0] */ +/* 67 unused (bit 03) */ +/* 66 unused (bit 02) */ +/* 65 unused (bit 01) */ +/* 64 unused (bit 00) */ +/*------------- Register: int_stat_1 */ +/* 63 unused (bit 31) */ +/* 62 unused (bit 30) */ +/* 61 unused (bit 29) */ +/* 60 unused (bit 28) */ +/* 59 unused (bit 27) */ +/* 58 unused (bit 26) */ +/* 57 unused (bit 25) */ +/* 56 unused (bit 24) */ +#define irq_buf_dma_mem2mem (ibase+55) /* BufDMA Memory to Memory + * Interrupt */ +#define irq_buf_dma_usbtransmit (ibase+54) /* BufDMA USB Transmit + * Interrupt */ +#define irq_buf_dma_qpskpodtransmit (ibase+53) /* BufDMA QPSK/POD Tramsit + * Interrupt */ +#define irq_buf_dma_transmit_error (ibase+52) /* BufDMA Transmit Error + * Interrupt */ +#define irq_buf_dma_usbrecv (ibase+51) /* BufDMA USB Receive + * Interrupt */ +#define irq_buf_dma_qpskpodrecv (ibase+50) /* BufDMA QPSK/POD Receive + * Interrupt */ +#define irq_buf_dma_recv_error (ibase+49) /* BufDMA Receive Error + * Interrupt */ +#define irq_qamdma_transmit_play (ibase+48) /* QAMDMA Transmit/Play + * Interrupt */ +#define irq_qamdma_transmit_error (ibase+47) /* QAMDMA Transmit Error + * Interrupt */ +#define irq_qamdma_recv2high (ibase+46) /* QAMDMA Receive 2 High + * (Chans 63-32) */ +#define irq_qamdma_recv2low (ibase+45) /* QAMDMA Receive 2 Low + * (Chans 31-0) */ +#define irq_qamdma_recv1high (ibase+44) /* QAMDMA Receive 1 High + * (Chans 63-32) */ +#define irq_qamdma_recv1low (ibase+43) /* QAMDMA Receive 1 Low + * (Chans 31-0) */ +#define irq_qamdma_recv_error (ibase+42) /* QAMDMA Receive Error + * Interrupt */ +#define irq_mpegsplice (ibase+41) /* MPEG Splice Interrupt */ +#define irq_deinterlace_rdy (ibase+40) /* Deinterlacer Frame Ready + * Interrupt */ +#define irq_ext_in0 (ibase+39) /* External Interrupt irq_in0 */ +#define irq_gpio3 (ibase+38) /* GP I/O IRQ 3 - From GP I/O + * Module */ +#define irq_gpio2 (ibase+37) /* GP I/O IRQ 2 - From GP I/O + * Module (ABE_intN) */ +#define irq_pcrcmplt1 (ibase+36) /* PCR Capture Complete or + * Discontinuity 1 */ +#define irq_pcrcmplt2 (ibase+35) /* PCR Capture Complete or + * Discontinuity 2 */ +#define irq_parse_peierr (ibase+34) /* PID Parser Error Detect + * (PEI) */ +#define irq_parse_cont_err (ibase+33) /* PID Parser continuity error + * detect */ +#define irq_ds1framer (ibase+32) /* DS1 Framer Interrupt */ +/*------------- Register: int_stat_0 */ +#define irq_gpio1 (ibase+31) /* GP I/O IRQ 1 - From GP I/O + * Module */ +#define irq_gpio0 (ibase+30) /* GP I/O IRQ 0 - From GP I/O + * Module */ +#define irq_qpsk_out_aloha (ibase+29) /* QPSK Output Slotted Aloha + * (chan 3) Transmission + * Completed OK */ +#define irq_qpsk_out_tdma (ibase+28) /* QPSK Output TDMA (chan 2) + * Transmission Completed OK */ +#define irq_qpsk_out_reserve (ibase+27) /* QPSK Output Reservation + * (chan 1) Transmission + * Completed OK */ +#define irq_qpsk_out_aloha_err (ibase+26) /* QPSK Output Slotted Aloha + * (chan 3)Transmission + * completed with Errors. */ +#define irq_qpsk_out_tdma_err (ibase+25) /* QPSK Output TDMA (chan 2) + * Transmission completed with + * Errors. */ +#define irq_qpsk_out_rsrv_err (ibase+24) /* QPSK Output Reservation + * (chan 1) Transmission + * completed with Errors */ +#define irq_aloha_fail (ibase+23) /* Unsuccessful Resend of Aloha + * for N times. Aloha retry + * timeout for channel 3. */ +#define irq_timer1 (ibase+22) /* Programmable Timer + * Interrupt */ +#define irq_keyboard (ibase+21) /* Keyboard Module Interrupt */ +#define irq_i2c (ibase+20) /* I2C Module Interrupt */ +#define irq_spi (ibase+19) /* SPI Module Interrupt */ +#define irq_irblaster (ibase+18) /* IR Blaster Interrupt */ +#define irq_splice_detect (ibase+17) /* PID Key Change Interrupt or + * Splice Detect Interrupt */ +#define irq_se_micro (ibase+16) /* Secure Micro I/F Module + * Interrupt */ +#define irq_uart1 (ibase+15) /* UART Interrupt */ +#define irq_irrecv (ibase+14) /* IR Receiver Interrupt */ +#define irq_host_int1 (ibase+13) /* Host-to-Host Interrupt 1 */ +#define irq_host_int0 (ibase+12) /* Host-to-Host Interrupt 0 */ +#define irq_qpsk_hecerr (ibase+11) /* QPSK HEC Error Interrupt */ +#define irq_qpsk_crcerr (ibase+10) /* QPSK AAL-5 CRC Error + * Interrupt */ +/* 9 unused (bit 09) */ +/* 8 unused (bit 08) */ +#define irq_psicrcerr (ibase+7) /* QAM PSI CRC Error + * Interrupt */ +#define irq_psilength_err (ibase+6) /* QAM PSI Length Error + * Interrupt */ +#define irq_esfforward (ibase+5) /* ESF Interrupt Mark From + * Forward Path Reference - + * every 3ms when forward Mbits + * and forward slot control + * bytes are updated. */ +#define irq_esfreverse (ibase+4) /* ESF Interrupt Mark from + * Reverse Path Reference - + * delayed from forward mark by + * the ranging delay plus a + * fixed amount. When reverse + * Mbits and reverse slot + * control bytes are updated. + * Occurs every 3ms for 3.0M and + * 1.554 M upstream rates and + * every 6 ms for 256K upstream + * rate. */ +#define irq_aloha_timeout (ibase+3) /* Slotted-Aloha timeout on + * Channel 1. */ +#define irq_reservation (ibase+2) /* Partial (or Incremental) + * Reservation Message Completed + * or Slotted aloha verify for + * channel 1. */ +#define irq_aloha3 (ibase+1) /* Slotted-Aloha Message Verify + * Interrupt or Reservation + * increment completed for + * channel 3. */ +#define irq_mpeg_d (ibase+0) /* MPEG Decoder Interrupt */ +#endif /* _ASM_MACH_POWERTV_INTERRUPTS_H_ */ + diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h new file mode 100644 index 00000000000..e6276d5146e --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/ioremap.h @@ -0,0 +1,90 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Portions Copyright (C) Cisco Systems, Inc. + */ +#ifndef __ASM_MACH_POWERTV_IOREMAP_H +#define __ASM_MACH_POWERTV_IOREMAP_H + +#include <linux/types.h> + +#define LOW_MEM_BOUNDARY_PHYS 0x20000000 +#define LOW_MEM_BOUNDARY_MASK (~(LOW_MEM_BOUNDARY_PHYS - 1)) + +/* + * The bus addresses are different than the physical addresses that + * the processor sees by an offset. This offset varies by ASIC + * version. Define a variable to hold the offset and some macros to + * make the conversion simpler. */ +extern unsigned long phys_to_bus_offset; + +#ifdef CONFIG_HIGHMEM +#define MEM_GAP_PHYS 0x60000000 +/* + * TODO: We will use the hard code for conversion between physical and + * bus until the bootloader releases their device tree to us. + */ +#define phys_to_bus(x) (((x) < LOW_MEM_BOUNDARY_PHYS) ? \ + ((x) + phys_to_bus_offset) : (x)) +#define bus_to_phys(x) (((x) < MEM_GAP_PHYS_ADDR) ? \ + ((x) - phys_to_bus_offset) : (x)) +#else +#define phys_to_bus(x) ((x) + phys_to_bus_offset) +#define bus_to_phys(x) ((x) - phys_to_bus_offset) +#endif + +/* + * Determine whether the address we are given is for an ASIC device + * Params: addr Address to check + * Returns: Zero if the address is not for ASIC devices, non-zero + * if it is. + */ +static inline int asic_is_device_addr(phys_t addr) +{ + return !((phys_t)addr & (phys_t) LOW_MEM_BOUNDARY_MASK); +} + +/* + * Determine whether the address we are given is external RAM mappable + * into KSEG1. + * Params: addr Address to check + * Returns: Zero if the address is not for external RAM and + */ +static inline int asic_is_lowmem_ram_addr(phys_t addr) +{ + /* + * The RAM always starts at the following address in the processor's + * physical address space + */ + static const phys_t phys_ram_base = 0x10000000; + phys_t bus_ram_base; + + bus_ram_base = phys_to_bus_offset + phys_ram_base; + + return addr >= bus_ram_base && + addr < (bus_ram_base + (LOW_MEM_BOUNDARY_PHYS - phys_ram_base)); +} + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return 0; +} +#endif /* __ASM_MACH_POWERTV_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-powertv/irq.h b/arch/mips/include/asm/mach-powertv/irq.h new file mode 100644 index 00000000000..4bd5d0c61a9 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/irq.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_MACH_POWERTV_IRQ_H +#define _ASM_MACH_POWERTV_IRQ_H +#include <asm/mach-powertv/interrupts.h> + +#define MIPS_CPU_IRQ_BASE ibase +#define NR_IRQS 127 +#endif diff --git a/arch/mips/include/asm/mach-powertv/powertv-clock.h b/arch/mips/include/asm/mach-powertv/powertv-clock.h new file mode 100644 index 00000000000..6f3e9a0fcf8 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/powertv-clock.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +/* + * Local definitions for the powertv PCI code + */ + +#ifndef _POWERTV_PCI_POWERTV_PCI_H_ +#define _POWERTV_PCI_POWERTV_PCI_H_ +extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +extern int asic_pcie_init(void); +extern int asic_pcie_init(void); + +extern int log_level; +#endif diff --git a/arch/mips/include/asm/mach-excite/war.h b/arch/mips/include/asm/mach-powertv/war.h index 1f82180c159..7ac05ecc512 100644 --- a/arch/mips/include/asm/mach-excite/war.h +++ b/arch/mips/include/asm/mach-powertv/war.h @@ -3,10 +3,13 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * + * This version for the PowerTV platform copied from the Malta version. + * * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + * Portions copyright (C) 2009 Cisco Systems, Inc. */ -#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H -#define __ASM_MIPS_MACH_EXCITE_WAR_H +#ifndef __ASM_MACH_POWERTV_WAR_H +#define __ASM_MACH_POWERTV_WAR_H #define R4600_V1_INDEX_ICACHEOP_WAR 0 #define R4600_V1_HIT_CACHEOP_WAR 0 @@ -14,12 +17,12 @@ #define R5432_CP0_INTERRUPT_WAR 0 #define BCM1250_M3_WAR 0 #define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 1 +#define MIPS_CACHE_SYNC_WAR 1 #define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 1 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 #define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 -#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */ +#endif /* __ASM_MACH_POWERTV_WAR_H */ diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h index a576ce044c3..d14e2adc4be 100644 --- a/arch/mips/include/asm/mips-boards/bonito64.h +++ b/arch/mips/include/asm/mips-boards/bonito64.h @@ -26,11 +26,6 @@ /* offsets from base register */ #define BONITO(x) (x) -#elif defined(CONFIG_LEMOTE_FULOONG2E) - -#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x))) -#define BONITO_IRQ_BASE 32 - #else /* diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 6083db58650..145bb81ccaa 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -24,6 +24,33 @@ #endif /* SMTC */ #include <asm-generic/mm_hooks.h> +#ifdef CONFIG_MIPS_PGD_C0_CONTEXT + +#define TLBMISS_HANDLER_SETUP_PGD(pgd) \ + tlbmiss_handler_setup_pgd((unsigned long)(pgd)) + +static inline void tlbmiss_handler_setup_pgd(unsigned long pgd) +{ + /* Check for swapper_pg_dir and convert to physical address. */ + if ((pgd & CKSEG3) == CKSEG0) + pgd = CPHYSADDR(pgd); + write_c0_context(pgd << 11); +} + +#define TLBMISS_HANDLER_SETUP() \ + do { \ + TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir); \ + write_c0_xcontext((unsigned long) smp_processor_id() << 51); \ + } while (0) + + +static inline unsigned long get_current_pgd(void) +{ + return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL); +} + +#else /* CONFIG_MIPS_PGD_C0_CONTEXT: using pgd_current*/ + /* * For the fast tlb miss handlers, we keep a per cpu array of pointers * to the current pgd for each processor. Also, the proc. id is stuffed @@ -46,7 +73,7 @@ extern unsigned long pgd_current[]; back_to_back_c0_hazard(); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif - +#endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/ #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) #define ASID_INC 0x40 diff --git a/arch/mips/include/asm/octeon/cvmx-agl-defs.h b/arch/mips/include/asm/octeon/cvmx-agl-defs.h new file mode 100644 index 00000000000..ec94b9ab7be --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-agl-defs.h @@ -0,0 +1,1194 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_AGL_DEFS_H__ +#define __CVMX_AGL_DEFS_H__ + +#define CVMX_AGL_GMX_BAD_REG \ + CVMX_ADD_IO_SEG(0x00011800E0000518ull) +#define CVMX_AGL_GMX_BIST \ + CVMX_ADD_IO_SEG(0x00011800E0000400ull) +#define CVMX_AGL_GMX_DRV_CTL \ + CVMX_ADD_IO_SEG(0x00011800E00007F0ull) +#define CVMX_AGL_GMX_INF_MODE \ + CVMX_ADD_IO_SEG(0x00011800E00007F8ull) +#define CVMX_AGL_GMX_PRTX_CFG(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000010ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM0(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000180ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM1(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000188ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM2(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000190ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM3(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000198ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM4(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00001A0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM5(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00001A8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM_EN(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000108ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000100ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_DECISION(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000040ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_CHK(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000020ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000018ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_MAX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000030ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_MIN(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000028ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_IFG(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000058ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_INT_EN(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000008ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_INT_REG(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000000ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_JABBER(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000038ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_PAUSE_DROP_TIME(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000068ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000050ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000088ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000098ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS_DMAC(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000A8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS_DRP(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000B8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000080ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000C0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000090ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_DMAC(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000A0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000B0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_UDD_SKP(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000048ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RX_BP_DROPX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000420ull + (((offset) & 1) * 8)) +#define CVMX_AGL_GMX_RX_BP_OFFX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000460ull + (((offset) & 1) * 8)) +#define CVMX_AGL_GMX_RX_BP_ONX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000440ull + (((offset) & 1) * 8)) +#define CVMX_AGL_GMX_RX_PRT_INFO \ + CVMX_ADD_IO_SEG(0x00011800E00004E8ull) +#define CVMX_AGL_GMX_RX_TX_STATUS \ + CVMX_ADD_IO_SEG(0x00011800E00007E8ull) +#define CVMX_AGL_GMX_SMACX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000230ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_STAT_BP \ + CVMX_ADD_IO_SEG(0x00011800E0000520ull) +#define CVMX_AGL_GMX_TXX_APPEND(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000218ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000270ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_MIN_PKT(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000240ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_PKT_INTERVAL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000248ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_PKT_TIME(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000238ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_TOGO(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000258ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_ZERO(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000260ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_SOFT_PAUSE(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000250ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT0(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000280ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT1(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000288ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT2(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000290ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT3(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000298ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT4(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002A0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT5(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002A8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT6(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002B0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT7(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002B8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT8(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002C0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT9(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002C8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STATS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000268ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_THRESH(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000210ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TX_BP \ + CVMX_ADD_IO_SEG(0x00011800E00004D0ull) +#define CVMX_AGL_GMX_TX_COL_ATTEMPT \ + CVMX_ADD_IO_SEG(0x00011800E0000498ull) +#define CVMX_AGL_GMX_TX_IFG \ + CVMX_ADD_IO_SEG(0x00011800E0000488ull) +#define CVMX_AGL_GMX_TX_INT_EN \ + CVMX_ADD_IO_SEG(0x00011800E0000508ull) +#define CVMX_AGL_GMX_TX_INT_REG \ + CVMX_ADD_IO_SEG(0x00011800E0000500ull) +#define CVMX_AGL_GMX_TX_JAM \ + CVMX_ADD_IO_SEG(0x00011800E0000490ull) +#define CVMX_AGL_GMX_TX_LFSR \ + CVMX_ADD_IO_SEG(0x00011800E00004F8ull) +#define CVMX_AGL_GMX_TX_OVR_BP \ + CVMX_ADD_IO_SEG(0x00011800E00004C8ull) +#define CVMX_AGL_GMX_TX_PAUSE_PKT_DMAC \ + CVMX_ADD_IO_SEG(0x00011800E00004A0ull) +#define CVMX_AGL_GMX_TX_PAUSE_PKT_TYPE \ + CVMX_ADD_IO_SEG(0x00011800E00004A8ull) + +union cvmx_agl_gmx_bad_reg { + uint64_t u64; + struct cvmx_agl_gmx_bad_reg_s { + uint64_t reserved_38_63:26; + uint64_t txpsh1:1; + uint64_t txpop1:1; + uint64_t ovrflw1:1; + uint64_t txpsh:1; + uint64_t txpop:1; + uint64_t ovrflw:1; + uint64_t reserved_27_31:5; + uint64_t statovr:1; + uint64_t reserved_23_25:3; + uint64_t loststat:1; + uint64_t reserved_4_21:18; + uint64_t out_ovr:2; + uint64_t reserved_0_1:2; + } s; + struct cvmx_agl_gmx_bad_reg_s cn52xx; + struct cvmx_agl_gmx_bad_reg_s cn52xxp1; + struct cvmx_agl_gmx_bad_reg_cn56xx { + uint64_t reserved_35_63:29; + uint64_t txpsh:1; + uint64_t txpop:1; + uint64_t ovrflw:1; + uint64_t reserved_27_31:5; + uint64_t statovr:1; + uint64_t reserved_23_25:3; + uint64_t loststat:1; + uint64_t reserved_3_21:19; + uint64_t out_ovr:1; + uint64_t reserved_0_1:2; + } cn56xx; + struct cvmx_agl_gmx_bad_reg_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_bist { + uint64_t u64; + struct cvmx_agl_gmx_bist_s { + uint64_t reserved_10_63:54; + uint64_t status:10; + } s; + struct cvmx_agl_gmx_bist_s cn52xx; + struct cvmx_agl_gmx_bist_s cn52xxp1; + struct cvmx_agl_gmx_bist_s cn56xx; + struct cvmx_agl_gmx_bist_s cn56xxp1; +}; + +union cvmx_agl_gmx_drv_ctl { + uint64_t u64; + struct cvmx_agl_gmx_drv_ctl_s { + uint64_t reserved_49_63:15; + uint64_t byp_en1:1; + uint64_t reserved_45_47:3; + uint64_t pctl1:5; + uint64_t reserved_37_39:3; + uint64_t nctl1:5; + uint64_t reserved_17_31:15; + uint64_t byp_en:1; + uint64_t reserved_13_15:3; + uint64_t pctl:5; + uint64_t reserved_5_7:3; + uint64_t nctl:5; + } s; + struct cvmx_agl_gmx_drv_ctl_s cn52xx; + struct cvmx_agl_gmx_drv_ctl_s cn52xxp1; + struct cvmx_agl_gmx_drv_ctl_cn56xx { + uint64_t reserved_17_63:47; + uint64_t byp_en:1; + uint64_t reserved_13_15:3; + uint64_t pctl:5; + uint64_t reserved_5_7:3; + uint64_t nctl:5; + } cn56xx; + struct cvmx_agl_gmx_drv_ctl_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_inf_mode { + uint64_t u64; + struct cvmx_agl_gmx_inf_mode_s { + uint64_t reserved_2_63:62; + uint64_t en:1; + uint64_t reserved_0_0:1; + } s; + struct cvmx_agl_gmx_inf_mode_s cn52xx; + struct cvmx_agl_gmx_inf_mode_s cn52xxp1; + struct cvmx_agl_gmx_inf_mode_s cn56xx; + struct cvmx_agl_gmx_inf_mode_s cn56xxp1; +}; + +union cvmx_agl_gmx_prtx_cfg { + uint64_t u64; + struct cvmx_agl_gmx_prtx_cfg_s { + uint64_t reserved_6_63:58; + uint64_t tx_en:1; + uint64_t rx_en:1; + uint64_t slottime:1; + uint64_t duplex:1; + uint64_t speed:1; + uint64_t en:1; + } s; + struct cvmx_agl_gmx_prtx_cfg_s cn52xx; + struct cvmx_agl_gmx_prtx_cfg_s cn52xxp1; + struct cvmx_agl_gmx_prtx_cfg_s cn56xx; + struct cvmx_agl_gmx_prtx_cfg_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam0 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam0_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam1 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam1_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam2 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam2_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam3 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam3_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam4 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam4_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam5 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam5_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam_en { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam_en_s { + uint64_t reserved_8_63:56; + uint64_t en:8; + } s; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_ctl_s { + uint64_t reserved_4_63:60; + uint64_t cam_mode:1; + uint64_t mcst:2; + uint64_t bcst:1; + } s; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_decision { + uint64_t u64; + struct cvmx_agl_gmx_rxx_decision_s { + uint64_t reserved_5_63:59; + uint64_t cnt:5; + } s; + struct cvmx_agl_gmx_rxx_decision_s cn52xx; + struct cvmx_agl_gmx_rxx_decision_s cn52xxp1; + struct cvmx_agl_gmx_rxx_decision_s cn56xx; + struct cvmx_agl_gmx_rxx_decision_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_chk { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_chk_s { + uint64_t reserved_9_63:55; + uint64_t skperr:1; + uint64_t rcverr:1; + uint64_t lenerr:1; + uint64_t alnerr:1; + uint64_t fcserr:1; + uint64_t jabber:1; + uint64_t maxerr:1; + uint64_t reserved_1_1:1; + uint64_t minerr:1; + } s; + struct cvmx_agl_gmx_rxx_frm_chk_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_chk_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_chk_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_chk_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_ctl_s { + uint64_t reserved_10_63:54; + uint64_t pre_align:1; + uint64_t pad_len:1; + uint64_t vlan_len:1; + uint64_t pre_free:1; + uint64_t ctl_smac:1; + uint64_t ctl_mcst:1; + uint64_t ctl_bck:1; + uint64_t ctl_drp:1; + uint64_t pre_strp:1; + uint64_t pre_chk:1; + } s; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_max { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_max_s { + uint64_t reserved_16_63:48; + uint64_t len:16; + } s; + struct cvmx_agl_gmx_rxx_frm_max_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_max_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_max_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_max_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_min { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_min_s { + uint64_t reserved_16_63:48; + uint64_t len:16; + } s; + struct cvmx_agl_gmx_rxx_frm_min_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_min_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_min_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_min_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_ifg { + uint64_t u64; + struct cvmx_agl_gmx_rxx_ifg_s { + uint64_t reserved_4_63:60; + uint64_t ifg:4; + } s; + struct cvmx_agl_gmx_rxx_ifg_s cn52xx; + struct cvmx_agl_gmx_rxx_ifg_s cn52xxp1; + struct cvmx_agl_gmx_rxx_ifg_s cn56xx; + struct cvmx_agl_gmx_rxx_ifg_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_int_en { + uint64_t u64; + struct cvmx_agl_gmx_rxx_int_en_s { + uint64_t reserved_20_63:44; + uint64_t pause_drp:1; + uint64_t reserved_16_18:3; + uint64_t ifgerr:1; + uint64_t coldet:1; + uint64_t falerr:1; + uint64_t rsverr:1; + uint64_t pcterr:1; + uint64_t ovrerr:1; + uint64_t reserved_9_9:1; + uint64_t skperr:1; + uint64_t rcverr:1; + uint64_t lenerr:1; + uint64_t alnerr:1; + uint64_t fcserr:1; + uint64_t jabber:1; + uint64_t maxerr:1; + uint64_t reserved_1_1:1; + uint64_t minerr:1; + } s; + struct cvmx_agl_gmx_rxx_int_en_s cn52xx; + struct cvmx_agl_gmx_rxx_int_en_s cn52xxp1; + struct cvmx_agl_gmx_rxx_int_en_s cn56xx; + struct cvmx_agl_gmx_rxx_int_en_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_int_reg { + uint64_t u64; + struct cvmx_agl_gmx_rxx_int_reg_s { + uint64_t reserved_20_63:44; + uint64_t pause_drp:1; + uint64_t reserved_16_18:3; + uint64_t ifgerr:1; + uint64_t coldet:1; + uint64_t falerr:1; + uint64_t rsverr:1; + uint64_t pcterr:1; + uint64_t ovrerr:1; + uint64_t reserved_9_9:1; + uint64_t skperr:1; + uint64_t rcverr:1; + uint64_t lenerr:1; + uint64_t alnerr:1; + uint64_t fcserr:1; + uint64_t jabber:1; + uint64_t maxerr:1; + uint64_t reserved_1_1:1; + uint64_t minerr:1; + } s; + struct cvmx_agl_gmx_rxx_int_reg_s cn52xx; + struct cvmx_agl_gmx_rxx_int_reg_s cn52xxp1; + struct cvmx_agl_gmx_rxx_int_reg_s cn56xx; + struct cvmx_agl_gmx_rxx_int_reg_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_jabber { + uint64_t u64; + struct cvmx_agl_gmx_rxx_jabber_s { + uint64_t reserved_16_63:48; + uint64_t cnt:16; + } s; + struct cvmx_agl_gmx_rxx_jabber_s cn52xx; + struct cvmx_agl_gmx_rxx_jabber_s cn52xxp1; + struct cvmx_agl_gmx_rxx_jabber_s cn56xx; + struct cvmx_agl_gmx_rxx_jabber_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_pause_drop_time { + uint64_t u64; + struct cvmx_agl_gmx_rxx_pause_drop_time_s { + uint64_t reserved_16_63:48; + uint64_t status:16; + } s; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn52xx; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn52xxp1; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn56xx; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_ctl_s { + uint64_t reserved_1_63:63; + uint64_t rd_clr:1; + } s; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs_dmac { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs_drp { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_bad { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_dmac { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_drp { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_udd_skp { + uint64_t u64; + struct cvmx_agl_gmx_rxx_udd_skp_s { + uint64_t reserved_9_63:55; + uint64_t fcssel:1; + uint64_t reserved_7_7:1; + uint64_t len:7; + } s; + struct cvmx_agl_gmx_rxx_udd_skp_s cn52xx; + struct cvmx_agl_gmx_rxx_udd_skp_s cn52xxp1; + struct cvmx_agl_gmx_rxx_udd_skp_s cn56xx; + struct cvmx_agl_gmx_rxx_udd_skp_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_bp_dropx { + uint64_t u64; + struct cvmx_agl_gmx_rx_bp_dropx_s { + uint64_t reserved_6_63:58; + uint64_t mark:6; + } s; + struct cvmx_agl_gmx_rx_bp_dropx_s cn52xx; + struct cvmx_agl_gmx_rx_bp_dropx_s cn52xxp1; + struct cvmx_agl_gmx_rx_bp_dropx_s cn56xx; + struct cvmx_agl_gmx_rx_bp_dropx_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_bp_offx { + uint64_t u64; + struct cvmx_agl_gmx_rx_bp_offx_s { + uint64_t reserved_6_63:58; + uint64_t mark:6; + } s; + struct cvmx_agl_gmx_rx_bp_offx_s cn52xx; + struct cvmx_agl_gmx_rx_bp_offx_s cn52xxp1; + struct cvmx_agl_gmx_rx_bp_offx_s cn56xx; + struct cvmx_agl_gmx_rx_bp_offx_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_bp_onx { + uint64_t u64; + struct cvmx_agl_gmx_rx_bp_onx_s { + uint64_t reserved_9_63:55; + uint64_t mark:9; + } s; + struct cvmx_agl_gmx_rx_bp_onx_s cn52xx; + struct cvmx_agl_gmx_rx_bp_onx_s cn52xxp1; + struct cvmx_agl_gmx_rx_bp_onx_s cn56xx; + struct cvmx_agl_gmx_rx_bp_onx_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_prt_info { + uint64_t u64; + struct cvmx_agl_gmx_rx_prt_info_s { + uint64_t reserved_18_63:46; + uint64_t drop:2; + uint64_t reserved_2_15:14; + uint64_t commit:2; + } s; + struct cvmx_agl_gmx_rx_prt_info_s cn52xx; + struct cvmx_agl_gmx_rx_prt_info_s cn52xxp1; + struct cvmx_agl_gmx_rx_prt_info_cn56xx { + uint64_t reserved_17_63:47; + uint64_t drop:1; + uint64_t reserved_1_15:15; + uint64_t commit:1; + } cn56xx; + struct cvmx_agl_gmx_rx_prt_info_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_rx_tx_status { + uint64_t u64; + struct cvmx_agl_gmx_rx_tx_status_s { + uint64_t reserved_6_63:58; + uint64_t tx:2; + uint64_t reserved_2_3:2; + uint64_t rx:2; + } s; + struct cvmx_agl_gmx_rx_tx_status_s cn52xx; + struct cvmx_agl_gmx_rx_tx_status_s cn52xxp1; + struct cvmx_agl_gmx_rx_tx_status_cn56xx { + uint64_t reserved_5_63:59; + uint64_t tx:1; + uint64_t reserved_1_3:3; + uint64_t rx:1; + } cn56xx; + struct cvmx_agl_gmx_rx_tx_status_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_smacx { + uint64_t u64; + struct cvmx_agl_gmx_smacx_s { + uint64_t reserved_48_63:16; + uint64_t smac:48; + } s; + struct cvmx_agl_gmx_smacx_s cn52xx; + struct cvmx_agl_gmx_smacx_s cn52xxp1; + struct cvmx_agl_gmx_smacx_s cn56xx; + struct cvmx_agl_gmx_smacx_s cn56xxp1; +}; + +union cvmx_agl_gmx_stat_bp { + uint64_t u64; + struct cvmx_agl_gmx_stat_bp_s { + uint64_t reserved_17_63:47; + uint64_t bp:1; + uint64_t cnt:16; + } s; + struct cvmx_agl_gmx_stat_bp_s cn52xx; + struct cvmx_agl_gmx_stat_bp_s cn52xxp1; + struct cvmx_agl_gmx_stat_bp_s cn56xx; + struct cvmx_agl_gmx_stat_bp_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_append { + uint64_t u64; + struct cvmx_agl_gmx_txx_append_s { + uint64_t reserved_4_63:60; + uint64_t force_fcs:1; + uint64_t fcs:1; + uint64_t pad:1; + uint64_t preamble:1; + } s; + struct cvmx_agl_gmx_txx_append_s cn52xx; + struct cvmx_agl_gmx_txx_append_s cn52xxp1; + struct cvmx_agl_gmx_txx_append_s cn56xx; + struct cvmx_agl_gmx_txx_append_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_ctl { + uint64_t u64; + struct cvmx_agl_gmx_txx_ctl_s { + uint64_t reserved_2_63:62; + uint64_t xsdef_en:1; + uint64_t xscol_en:1; + } s; + struct cvmx_agl_gmx_txx_ctl_s cn52xx; + struct cvmx_agl_gmx_txx_ctl_s cn52xxp1; + struct cvmx_agl_gmx_txx_ctl_s cn56xx; + struct cvmx_agl_gmx_txx_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_min_pkt { + uint64_t u64; + struct cvmx_agl_gmx_txx_min_pkt_s { + uint64_t reserved_8_63:56; + uint64_t min_size:8; + } s; + struct cvmx_agl_gmx_txx_min_pkt_s cn52xx; + struct cvmx_agl_gmx_txx_min_pkt_s cn52xxp1; + struct cvmx_agl_gmx_txx_min_pkt_s cn56xx; + struct cvmx_agl_gmx_txx_min_pkt_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_pkt_interval { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s { + uint64_t reserved_16_63:48; + uint64_t interval:16; + } s; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn52xx; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn56xx; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_pkt_time { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_pkt_time_s { + uint64_t reserved_16_63:48; + uint64_t time:16; + } s; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn52xx; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn56xx; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_togo { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_togo_s { + uint64_t reserved_16_63:48; + uint64_t time:16; + } s; + struct cvmx_agl_gmx_txx_pause_togo_s cn52xx; + struct cvmx_agl_gmx_txx_pause_togo_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_togo_s cn56xx; + struct cvmx_agl_gmx_txx_pause_togo_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_zero { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_zero_s { + uint64_t reserved_1_63:63; + uint64_t send:1; + } s; + struct cvmx_agl_gmx_txx_pause_zero_s cn52xx; + struct cvmx_agl_gmx_txx_pause_zero_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_zero_s cn56xx; + struct cvmx_agl_gmx_txx_pause_zero_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_soft_pause { + uint64_t u64; + struct cvmx_agl_gmx_txx_soft_pause_s { + uint64_t reserved_16_63:48; + uint64_t time:16; + } s; + struct cvmx_agl_gmx_txx_soft_pause_s cn52xx; + struct cvmx_agl_gmx_txx_soft_pause_s cn52xxp1; + struct cvmx_agl_gmx_txx_soft_pause_s cn56xx; + struct cvmx_agl_gmx_txx_soft_pause_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat0 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat0_s { + uint64_t xsdef:32; + uint64_t xscol:32; + } s; + struct cvmx_agl_gmx_txx_stat0_s cn52xx; + struct cvmx_agl_gmx_txx_stat0_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat0_s cn56xx; + struct cvmx_agl_gmx_txx_stat0_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat1 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat1_s { + uint64_t scol:32; + uint64_t mcol:32; + } s; + struct cvmx_agl_gmx_txx_stat1_s cn52xx; + struct cvmx_agl_gmx_txx_stat1_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat1_s cn56xx; + struct cvmx_agl_gmx_txx_stat1_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat2 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat2_s { + uint64_t reserved_48_63:16; + uint64_t octs:48; + } s; + struct cvmx_agl_gmx_txx_stat2_s cn52xx; + struct cvmx_agl_gmx_txx_stat2_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat2_s cn56xx; + struct cvmx_agl_gmx_txx_stat2_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat3 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat3_s { + uint64_t reserved_32_63:32; + uint64_t pkts:32; + } s; + struct cvmx_agl_gmx_txx_stat3_s cn52xx; + struct cvmx_agl_gmx_txx_stat3_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat3_s cn56xx; + struct cvmx_agl_gmx_txx_stat3_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat4 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat4_s { + uint64_t hist1:32; + uint64_t hist0:32; + } s; + struct cvmx_agl_gmx_txx_stat4_s cn52xx; + struct cvmx_agl_gmx_txx_stat4_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat4_s cn56xx; + struct cvmx_agl_gmx_txx_stat4_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat5 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat5_s { + uint64_t hist3:32; + uint64_t hist2:32; + } s; + struct cvmx_agl_gmx_txx_stat5_s cn52xx; + struct cvmx_agl_gmx_txx_stat5_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat5_s cn56xx; + struct cvmx_agl_gmx_txx_stat5_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat6 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat6_s { + uint64_t hist5:32; + uint64_t hist4:32; + } s; + struct cvmx_agl_gmx_txx_stat6_s cn52xx; + struct cvmx_agl_gmx_txx_stat6_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat6_s cn56xx; + struct cvmx_agl_gmx_txx_stat6_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat7 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat7_s { + uint64_t hist7:32; + uint64_t hist6:32; + } s; + struct cvmx_agl_gmx_txx_stat7_s cn52xx; + struct cvmx_agl_gmx_txx_stat7_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat7_s cn56xx; + struct cvmx_agl_gmx_txx_stat7_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat8 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat8_s { + uint64_t mcst:32; + uint64_t bcst:32; + } s; + struct cvmx_agl_gmx_txx_stat8_s cn52xx; + struct cvmx_agl_gmx_txx_stat8_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat8_s cn56xx; + struct cvmx_agl_gmx_txx_stat8_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat9 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat9_s { + uint64_t undflw:32; + uint64_t ctl:32; + } s; + struct cvmx_agl_gmx_txx_stat9_s cn52xx; + struct cvmx_agl_gmx_txx_stat9_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat9_s cn56xx; + struct cvmx_agl_gmx_txx_stat9_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stats_ctl { + uint64_t u64; + struct cvmx_agl_gmx_txx_stats_ctl_s { + uint64_t reserved_1_63:63; + uint64_t rd_clr:1; + } s; + struct cvmx_agl_gmx_txx_stats_ctl_s cn52xx; + struct cvmx_agl_gmx_txx_stats_ctl_s cn52xxp1; + struct cvmx_agl_gmx_txx_stats_ctl_s cn56xx; + struct cvmx_agl_gmx_txx_stats_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_thresh { + uint64_t u64; + struct cvmx_agl_gmx_txx_thresh_s { + uint64_t reserved_6_63:58; + uint64_t cnt:6; + } s; + struct cvmx_agl_gmx_txx_thresh_s cn52xx; + struct cvmx_agl_gmx_txx_thresh_s cn52xxp1; + struct cvmx_agl_gmx_txx_thresh_s cn56xx; + struct cvmx_agl_gmx_txx_thresh_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_bp { + uint64_t u64; + struct cvmx_agl_gmx_tx_bp_s { + uint64_t reserved_2_63:62; + uint64_t bp:2; + } s; + struct cvmx_agl_gmx_tx_bp_s cn52xx; + struct cvmx_agl_gmx_tx_bp_s cn52xxp1; + struct cvmx_agl_gmx_tx_bp_cn56xx { + uint64_t reserved_1_63:63; + uint64_t bp:1; + } cn56xx; + struct cvmx_agl_gmx_tx_bp_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_col_attempt { + uint64_t u64; + struct cvmx_agl_gmx_tx_col_attempt_s { + uint64_t reserved_5_63:59; + uint64_t limit:5; + } s; + struct cvmx_agl_gmx_tx_col_attempt_s cn52xx; + struct cvmx_agl_gmx_tx_col_attempt_s cn52xxp1; + struct cvmx_agl_gmx_tx_col_attempt_s cn56xx; + struct cvmx_agl_gmx_tx_col_attempt_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_ifg { + uint64_t u64; + struct cvmx_agl_gmx_tx_ifg_s { + uint64_t reserved_8_63:56; + uint64_t ifg2:4; + uint64_t ifg1:4; + } s; + struct cvmx_agl_gmx_tx_ifg_s cn52xx; + struct cvmx_agl_gmx_tx_ifg_s cn52xxp1; + struct cvmx_agl_gmx_tx_ifg_s cn56xx; + struct cvmx_agl_gmx_tx_ifg_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_int_en { + uint64_t u64; + struct cvmx_agl_gmx_tx_int_en_s { + uint64_t reserved_18_63:46; + uint64_t late_col:2; + uint64_t reserved_14_15:2; + uint64_t xsdef:2; + uint64_t reserved_10_11:2; + uint64_t xscol:2; + uint64_t reserved_4_7:4; + uint64_t undflw:2; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } s; + struct cvmx_agl_gmx_tx_int_en_s cn52xx; + struct cvmx_agl_gmx_tx_int_en_s cn52xxp1; + struct cvmx_agl_gmx_tx_int_en_cn56xx { + uint64_t reserved_17_63:47; + uint64_t late_col:1; + uint64_t reserved_13_15:3; + uint64_t xsdef:1; + uint64_t reserved_9_11:3; + uint64_t xscol:1; + uint64_t reserved_3_7:5; + uint64_t undflw:1; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } cn56xx; + struct cvmx_agl_gmx_tx_int_en_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_int_reg { + uint64_t u64; + struct cvmx_agl_gmx_tx_int_reg_s { + uint64_t reserved_18_63:46; + uint64_t late_col:2; + uint64_t reserved_14_15:2; + uint64_t xsdef:2; + uint64_t reserved_10_11:2; + uint64_t xscol:2; + uint64_t reserved_4_7:4; + uint64_t undflw:2; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } s; + struct cvmx_agl_gmx_tx_int_reg_s cn52xx; + struct cvmx_agl_gmx_tx_int_reg_s cn52xxp1; + struct cvmx_agl_gmx_tx_int_reg_cn56xx { + uint64_t reserved_17_63:47; + uint64_t late_col:1; + uint64_t reserved_13_15:3; + uint64_t xsdef:1; + uint64_t reserved_9_11:3; + uint64_t xscol:1; + uint64_t reserved_3_7:5; + uint64_t undflw:1; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } cn56xx; + struct cvmx_agl_gmx_tx_int_reg_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_jam { + uint64_t u64; + struct cvmx_agl_gmx_tx_jam_s { + uint64_t reserved_8_63:56; + uint64_t jam:8; + } s; + struct cvmx_agl_gmx_tx_jam_s cn52xx; + struct cvmx_agl_gmx_tx_jam_s cn52xxp1; + struct cvmx_agl_gmx_tx_jam_s cn56xx; + struct cvmx_agl_gmx_tx_jam_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_lfsr { + uint64_t u64; + struct cvmx_agl_gmx_tx_lfsr_s { + uint64_t reserved_16_63:48; + uint64_t lfsr:16; + } s; + struct cvmx_agl_gmx_tx_lfsr_s cn52xx; + struct cvmx_agl_gmx_tx_lfsr_s cn52xxp1; + struct cvmx_agl_gmx_tx_lfsr_s cn56xx; + struct cvmx_agl_gmx_tx_lfsr_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_ovr_bp { + uint64_t u64; + struct cvmx_agl_gmx_tx_ovr_bp_s { + uint64_t reserved_10_63:54; + uint64_t en:2; + uint64_t reserved_6_7:2; + uint64_t bp:2; + uint64_t reserved_2_3:2; + uint64_t ign_full:2; + } s; + struct cvmx_agl_gmx_tx_ovr_bp_s cn52xx; + struct cvmx_agl_gmx_tx_ovr_bp_s cn52xxp1; + struct cvmx_agl_gmx_tx_ovr_bp_cn56xx { + uint64_t reserved_9_63:55; + uint64_t en:1; + uint64_t reserved_5_7:3; + uint64_t bp:1; + uint64_t reserved_1_3:3; + uint64_t ign_full:1; + } cn56xx; + struct cvmx_agl_gmx_tx_ovr_bp_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_pause_pkt_dmac { + uint64_t u64; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s { + uint64_t reserved_48_63:16; + uint64_t dmac:48; + } s; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn52xx; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn52xxp1; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn56xx; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_pause_pkt_type { + uint64_t u64; + struct cvmx_agl_gmx_tx_pause_pkt_type_s { + uint64_t reserved_16_63:48; + uint64_t type:16; + } s; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn52xx; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn52xxp1; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn56xx; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn56xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-mixx-defs.h b/arch/mips/include/asm/octeon/cvmx-mixx-defs.h new file mode 100644 index 00000000000..dab6dca492f --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-mixx-defs.h @@ -0,0 +1,248 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_MIXX_DEFS_H__ +#define __CVMX_MIXX_DEFS_H__ + +#define CVMX_MIXX_BIST(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100078ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_CTL(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100020ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_INTENA(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100050ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRCNT(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100030ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRHWM(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100028ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRING1(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100010ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRING2(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100018ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ISR(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100048ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORCNT(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100040ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORHWM(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100038ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORING1(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100000ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORING2(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100008ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_REMCNT(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100058ull + (((offset) & 1) * 2048)) + +union cvmx_mixx_bist { + uint64_t u64; + struct cvmx_mixx_bist_s { + uint64_t reserved_4_63:60; + uint64_t mrqdat:1; + uint64_t ipfdat:1; + uint64_t irfdat:1; + uint64_t orfdat:1; + } s; + struct cvmx_mixx_bist_s cn52xx; + struct cvmx_mixx_bist_s cn52xxp1; + struct cvmx_mixx_bist_s cn56xx; + struct cvmx_mixx_bist_s cn56xxp1; +}; + +union cvmx_mixx_ctl { + uint64_t u64; + struct cvmx_mixx_ctl_s { + uint64_t reserved_8_63:56; + uint64_t crc_strip:1; + uint64_t busy:1; + uint64_t en:1; + uint64_t reset:1; + uint64_t lendian:1; + uint64_t nbtarb:1; + uint64_t mrq_hwm:2; + } s; + struct cvmx_mixx_ctl_s cn52xx; + struct cvmx_mixx_ctl_s cn52xxp1; + struct cvmx_mixx_ctl_s cn56xx; + struct cvmx_mixx_ctl_s cn56xxp1; +}; + +union cvmx_mixx_intena { + uint64_t u64; + struct cvmx_mixx_intena_s { + uint64_t reserved_7_63:57; + uint64_t orunena:1; + uint64_t irunena:1; + uint64_t data_drpena:1; + uint64_t ithena:1; + uint64_t othena:1; + uint64_t ivfena:1; + uint64_t ovfena:1; + } s; + struct cvmx_mixx_intena_s cn52xx; + struct cvmx_mixx_intena_s cn52xxp1; + struct cvmx_mixx_intena_s cn56xx; + struct cvmx_mixx_intena_s cn56xxp1; +}; + +union cvmx_mixx_ircnt { + uint64_t u64; + struct cvmx_mixx_ircnt_s { + uint64_t reserved_20_63:44; + uint64_t ircnt:20; + } s; + struct cvmx_mixx_ircnt_s cn52xx; + struct cvmx_mixx_ircnt_s cn52xxp1; + struct cvmx_mixx_ircnt_s cn56xx; + struct cvmx_mixx_ircnt_s cn56xxp1; +}; + +union cvmx_mixx_irhwm { + uint64_t u64; + struct cvmx_mixx_irhwm_s { + uint64_t reserved_40_63:24; + uint64_t ibplwm:20; + uint64_t irhwm:20; + } s; + struct cvmx_mixx_irhwm_s cn52xx; + struct cvmx_mixx_irhwm_s cn52xxp1; + struct cvmx_mixx_irhwm_s cn56xx; + struct cvmx_mixx_irhwm_s cn56xxp1; +}; + +union cvmx_mixx_iring1 { + uint64_t u64; + struct cvmx_mixx_iring1_s { + uint64_t reserved_60_63:4; + uint64_t isize:20; + uint64_t reserved_36_39:4; + uint64_t ibase:33; + uint64_t reserved_0_2:3; + } s; + struct cvmx_mixx_iring1_s cn52xx; + struct cvmx_mixx_iring1_s cn52xxp1; + struct cvmx_mixx_iring1_s cn56xx; + struct cvmx_mixx_iring1_s cn56xxp1; +}; + +union cvmx_mixx_iring2 { + uint64_t u64; + struct cvmx_mixx_iring2_s { + uint64_t reserved_52_63:12; + uint64_t itlptr:20; + uint64_t reserved_20_31:12; + uint64_t idbell:20; + } s; + struct cvmx_mixx_iring2_s cn52xx; + struct cvmx_mixx_iring2_s cn52xxp1; + struct cvmx_mixx_iring2_s cn56xx; + struct cvmx_mixx_iring2_s cn56xxp1; +}; + +union cvmx_mixx_isr { + uint64_t u64; + struct cvmx_mixx_isr_s { + uint64_t reserved_7_63:57; + uint64_t orun:1; + uint64_t irun:1; + uint64_t data_drp:1; + uint64_t irthresh:1; + uint64_t orthresh:1; + uint64_t idblovf:1; + uint64_t odblovf:1; + } s; + struct cvmx_mixx_isr_s cn52xx; + struct cvmx_mixx_isr_s cn52xxp1; + struct cvmx_mixx_isr_s cn56xx; + struct cvmx_mixx_isr_s cn56xxp1; +}; + +union cvmx_mixx_orcnt { + uint64_t u64; + struct cvmx_mixx_orcnt_s { + uint64_t reserved_20_63:44; + uint64_t orcnt:20; + } s; + struct cvmx_mixx_orcnt_s cn52xx; + struct cvmx_mixx_orcnt_s cn52xxp1; + struct cvmx_mixx_orcnt_s cn56xx; + struct cvmx_mixx_orcnt_s cn56xxp1; +}; + +union cvmx_mixx_orhwm { + uint64_t u64; + struct cvmx_mixx_orhwm_s { + uint64_t reserved_20_63:44; + uint64_t orhwm:20; + } s; + struct cvmx_mixx_orhwm_s cn52xx; + struct cvmx_mixx_orhwm_s cn52xxp1; + struct cvmx_mixx_orhwm_s cn56xx; + struct cvmx_mixx_orhwm_s cn56xxp1; +}; + +union cvmx_mixx_oring1 { + uint64_t u64; + struct cvmx_mixx_oring1_s { + uint64_t reserved_60_63:4; + uint64_t osize:20; + uint64_t reserved_36_39:4; + uint64_t obase:33; + uint64_t reserved_0_2:3; + } s; + struct cvmx_mixx_oring1_s cn52xx; + struct cvmx_mixx_oring1_s cn52xxp1; + struct cvmx_mixx_oring1_s cn56xx; + struct cvmx_mixx_oring1_s cn56xxp1; +}; + +union cvmx_mixx_oring2 { + uint64_t u64; + struct cvmx_mixx_oring2_s { + uint64_t reserved_52_63:12; + uint64_t otlptr:20; + uint64_t reserved_20_31:12; + uint64_t odbell:20; + } s; + struct cvmx_mixx_oring2_s cn52xx; + struct cvmx_mixx_oring2_s cn52xxp1; + struct cvmx_mixx_oring2_s cn56xx; + struct cvmx_mixx_oring2_s cn56xxp1; +}; + +union cvmx_mixx_remcnt { + uint64_t u64; + struct cvmx_mixx_remcnt_s { + uint64_t reserved_52_63:12; + uint64_t iremcnt:20; + uint64_t reserved_20_31:12; + uint64_t oremcnt:20; + } s; + struct cvmx_mixx_remcnt_s cn52xx; + struct cvmx_mixx_remcnt_s cn52xxp1; + struct cvmx_mixx_remcnt_s cn56xx; + struct cvmx_mixx_remcnt_s cn56xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-smix-defs.h b/arch/mips/include/asm/octeon/cvmx-smix-defs.h new file mode 100644 index 00000000000..9ae45fcbe3e --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-smix-defs.h @@ -0,0 +1,178 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_SMIX_DEFS_H__ +#define __CVMX_SMIX_DEFS_H__ + +#define CVMX_SMIX_CLK(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001818ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_CMD(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001800ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_EN(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001820ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_RD_DAT(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001810ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_WR_DAT(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001808ull + (((offset) & 1) * 256)) + +union cvmx_smix_clk { + uint64_t u64; + struct cvmx_smix_clk_s { + uint64_t reserved_25_63:39; + uint64_t mode:1; + uint64_t reserved_21_23:3; + uint64_t sample_hi:5; + uint64_t sample_mode:1; + uint64_t reserved_14_14:1; + uint64_t clk_idle:1; + uint64_t preamble:1; + uint64_t sample:4; + uint64_t phase:8; + } s; + struct cvmx_smix_clk_cn30xx { + uint64_t reserved_21_63:43; + uint64_t sample_hi:5; + uint64_t reserved_14_15:2; + uint64_t clk_idle:1; + uint64_t preamble:1; + uint64_t sample:4; + uint64_t phase:8; + } cn30xx; + struct cvmx_smix_clk_cn30xx cn31xx; + struct cvmx_smix_clk_cn30xx cn38xx; + struct cvmx_smix_clk_cn30xx cn38xxp2; + struct cvmx_smix_clk_cn50xx { + uint64_t reserved_25_63:39; + uint64_t mode:1; + uint64_t reserved_21_23:3; + uint64_t sample_hi:5; + uint64_t reserved_14_15:2; + uint64_t clk_idle:1; + uint64_t preamble:1; + uint64_t sample:4; + uint64_t phase:8; + } cn50xx; + struct cvmx_smix_clk_s cn52xx; + struct cvmx_smix_clk_cn50xx cn52xxp1; + struct cvmx_smix_clk_s cn56xx; + struct cvmx_smix_clk_cn50xx cn56xxp1; + struct cvmx_smix_clk_cn30xx cn58xx; + struct cvmx_smix_clk_cn30xx cn58xxp1; +}; + +union cvmx_smix_cmd { + uint64_t u64; + struct cvmx_smix_cmd_s { + uint64_t reserved_18_63:46; + uint64_t phy_op:2; + uint64_t reserved_13_15:3; + uint64_t phy_adr:5; + uint64_t reserved_5_7:3; + uint64_t reg_adr:5; + } s; + struct cvmx_smix_cmd_cn30xx { + uint64_t reserved_17_63:47; + uint64_t phy_op:1; + uint64_t reserved_13_15:3; + uint64_t phy_adr:5; + uint64_t reserved_5_7:3; + uint64_t reg_adr:5; + } cn30xx; + struct cvmx_smix_cmd_cn30xx cn31xx; + struct cvmx_smix_cmd_cn30xx cn38xx; + struct cvmx_smix_cmd_cn30xx cn38xxp2; + struct cvmx_smix_cmd_s cn50xx; + struct cvmx_smix_cmd_s cn52xx; + struct cvmx_smix_cmd_s cn52xxp1; + struct cvmx_smix_cmd_s cn56xx; + struct cvmx_smix_cmd_s cn56xxp1; + struct cvmx_smix_cmd_cn30xx cn58xx; + struct cvmx_smix_cmd_cn30xx cn58xxp1; +}; + +union cvmx_smix_en { + uint64_t u64; + struct cvmx_smix_en_s { + uint64_t reserved_1_63:63; + uint64_t en:1; + } s; + struct cvmx_smix_en_s cn30xx; + struct cvmx_smix_en_s cn31xx; + struct cvmx_smix_en_s cn38xx; + struct cvmx_smix_en_s cn38xxp2; + struct cvmx_smix_en_s cn50xx; + struct cvmx_smix_en_s cn52xx; + struct cvmx_smix_en_s cn52xxp1; + struct cvmx_smix_en_s cn56xx; + struct cvmx_smix_en_s cn56xxp1; + struct cvmx_smix_en_s cn58xx; + struct cvmx_smix_en_s cn58xxp1; +}; + +union cvmx_smix_rd_dat { + uint64_t u64; + struct cvmx_smix_rd_dat_s { + uint64_t reserved_18_63:46; + uint64_t pending:1; + uint64_t val:1; + uint64_t dat:16; + } s; + struct cvmx_smix_rd_dat_s cn30xx; + struct cvmx_smix_rd_dat_s cn31xx; + struct cvmx_smix_rd_dat_s cn38xx; + struct cvmx_smix_rd_dat_s cn38xxp2; + struct cvmx_smix_rd_dat_s cn50xx; + struct cvmx_smix_rd_dat_s cn52xx; + struct cvmx_smix_rd_dat_s cn52xxp1; + struct cvmx_smix_rd_dat_s cn56xx; + struct cvmx_smix_rd_dat_s cn56xxp1; + struct cvmx_smix_rd_dat_s cn58xx; + struct cvmx_smix_rd_dat_s cn58xxp1; +}; + +union cvmx_smix_wr_dat { + uint64_t u64; + struct cvmx_smix_wr_dat_s { + uint64_t reserved_18_63:46; + uint64_t pending:1; + uint64_t val:1; + uint64_t dat:16; + } s; + struct cvmx_smix_wr_dat_s cn30xx; + struct cvmx_smix_wr_dat_s cn31xx; + struct cvmx_smix_wr_dat_s cn38xx; + struct cvmx_smix_wr_dat_s cn38xxp2; + struct cvmx_smix_wr_dat_s cn50xx; + struct cvmx_smix_wr_dat_s cn52xx; + struct cvmx_smix_wr_dat_s cn52xxp1; + struct cvmx_smix_wr_dat_s cn56xx; + struct cvmx_smix_wr_dat_s cn56xxp1; + struct cvmx_smix_wr_dat_s cn58xx; + struct cvmx_smix_wr_dat_s cn58xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h index cac9b1a206f..4d0a8c61fc3 100644 --- a/arch/mips/include/asm/octeon/octeon.h +++ b/arch/mips/include/asm/octeon/octeon.h @@ -47,6 +47,7 @@ struct octeon_cop2_state; extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *state); extern void octeon_crypto_disable(struct octeon_cop2_state *state, unsigned long flags); +extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task); extern void octeon_init_cvmcount(void); diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index d6eb6134abe..1854336e56a 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -390,6 +390,19 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma, #include <asm-generic/pgtable.h> /* + * uncached accelerated TLB map for video memory access + */ +#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED +#define __HAVE_PHYS_MEM_ACCESS_PROT + +struct file; +pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); +int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t *vma_prot); +#endif + +/* * We provide our own get_unmapped area to cope with the virtual aliasing * constraints placed on us by the cache architecture. */ diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h index bfce5c786f1..63741ca1e42 100644 --- a/arch/mips/include/asm/sgialib.h +++ b/arch/mips/include/asm/sgialib.h @@ -85,8 +85,7 @@ extern void prom_identify_arch(void); extern PCHAR ArcGetEnvironmentVariable(PCHAR name); extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value); -/* ARCS command line acquisition and parsing. */ -extern char *prom_getcmdline(void); +/* ARCS command line parsing. */ extern void prom_init_cmdline(void); /* Acquiring info about the current time, etc. */ diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index db0fa7b5aea..3b6da3330e3 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -51,9 +51,6 @@ LONG_S v1, PT_ACX(sp) #else mfhi v1 - LONG_S v1, PT_HI(sp) - mflo v1 - LONG_S v1, PT_LO(sp) #endif #ifdef CONFIG_32BIT LONG_S $8, PT_R8(sp) @@ -62,10 +59,17 @@ LONG_S $10, PT_R10(sp) LONG_S $11, PT_R11(sp) LONG_S $12, PT_R12(sp) +#ifndef CONFIG_CPU_HAS_SMARTMIPS + LONG_S v1, PT_HI(sp) + mflo v1 +#endif LONG_S $13, PT_R13(sp) LONG_S $14, PT_R14(sp) LONG_S $15, PT_R15(sp) LONG_S $24, PT_R24(sp) +#ifndef CONFIG_CPU_HAS_SMARTMIPS + LONG_S v1, PT_LO(sp) +#endif .endm .macro SAVE_STATIC @@ -83,15 +87,19 @@ #ifdef CONFIG_SMP #ifdef CONFIG_MIPS_MT_SMTC #define PTEBASE_SHIFT 19 /* TCBIND */ +#define CPU_ID_REG CP0_TCBIND +#define CPU_ID_MFC0 mfc0 +#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT) +#define PTEBASE_SHIFT 48 /* XCONTEXT */ +#define CPU_ID_REG CP0_XCONTEXT +#define CPU_ID_MFC0 MFC0 #else #define PTEBASE_SHIFT 23 /* CONTEXT */ +#define CPU_ID_REG CP0_CONTEXT +#define CPU_ID_MFC0 MFC0 #endif .macro get_saved_sp /* SMP variation */ -#ifdef CONFIG_MIPS_MT_SMTC - mfc0 k0, CP0_TCBIND -#else - MFC0 k0, CP0_CONTEXT -#endif + CPU_ID_MFC0 k0, CPU_ID_REG #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) lui k1, %hi(kernelsp) #else @@ -107,11 +115,7 @@ .endm .macro set_saved_sp stackp temp temp2 -#ifdef CONFIG_MIPS_MT_SMTC - mfc0 \temp, CP0_TCBIND -#else - MFC0 \temp, CP0_CONTEXT -#endif + CPU_ID_MFC0 \temp, CPU_ID_REG LONG_SRL \temp, PTEBASE_SHIFT LONG_S \stackp, kernelsp(\temp) .endm @@ -166,7 +170,6 @@ LONG_S $0, PT_R0(sp) mfc0 v1, CP0_STATUS LONG_S $2, PT_R2(sp) - LONG_S v1, PT_STATUS(sp) #ifdef CONFIG_MIPS_MT_SMTC /* * Ideally, these instructions would be shuffled in @@ -178,20 +181,21 @@ LONG_S v1, PT_TCSTATUS(sp) #endif /* CONFIG_MIPS_MT_SMTC */ LONG_S $4, PT_R4(sp) - mfc0 v1, CP0_CAUSE LONG_S $5, PT_R5(sp) - LONG_S v1, PT_CAUSE(sp) + LONG_S v1, PT_STATUS(sp) + mfc0 v1, CP0_CAUSE LONG_S $6, PT_R6(sp) - MFC0 v1, CP0_EPC LONG_S $7, PT_R7(sp) + LONG_S v1, PT_CAUSE(sp) + MFC0 v1, CP0_EPC #ifdef CONFIG_64BIT LONG_S $8, PT_R8(sp) LONG_S $9, PT_R9(sp) #endif - LONG_S v1, PT_EPC(sp) LONG_S $25, PT_R25(sp) LONG_S $28, PT_R28(sp) LONG_S $31, PT_R31(sp) + LONG_S v1, PT_EPC(sp) ori $28, sp, _THREAD_MASK xori $28, _THREAD_MASK #ifdef CONFIG_CPU_CAVIUM_OCTEON diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index eecd2a9f155..9326af5186f 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -2,14 +2,17 @@ # Makefile for the Linux/MIPS kernel. # -CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) - extra-y := head.o init_task.o vmlinux.lds obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ ptrace.o reset.o setup.o signal.o syscall.o \ time.o topology.o traps.o unaligned.o watch.o +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_ftrace.o = -pg +CFLAGS_REMOVE_early_printk.o = -pg +endif + obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K_LIB) += cevt-r4k.o obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o @@ -19,6 +22,7 @@ obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o +obj-$(CONFIG_CSRC_POWERTV) += csrc-powertv.o obj-$(CONFIG_CSRC_R4K_LIB) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o obj-$(CONFIG_SYNC_R4K) += sync-r4k.o @@ -26,6 +30,8 @@ obj-$(CONFIG_SYNC_R4K) += sync-r4k.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_MODULES) += mips_ksyms.o module.o +obj-$(CONFIG_FUNCTION_TRACER) += mcount.o ftrace.o + obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o @@ -92,4 +98,8 @@ CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/n obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o +obj-$(CONFIG_MIPS_CPUFREQ) += cpufreq/ + EXTRA_CFLAGS += -Werror + +CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 7a51866068a..80e202eca05 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -16,6 +16,7 @@ #include <linux/ptrace.h> #include <linux/smp.h> #include <linux/stddef.h> +#include <linux/module.h> #include <asm/bugs.h> #include <asm/cpu.h> @@ -32,6 +33,7 @@ * the CPU very much. */ void (*cpu_wait)(void); +EXPORT_SYMBOL(cpu_wait); static void r3081_wait(void) { diff --git a/arch/mips/kernel/cpufreq/Kconfig b/arch/mips/kernel/cpufreq/Kconfig new file mode 100644 index 00000000000..58c601eee6f --- /dev/null +++ b/arch/mips/kernel/cpufreq/Kconfig @@ -0,0 +1,41 @@ +# +# CPU Frequency scaling +# + +config MIPS_EXTERNAL_TIMER + bool + +config MIPS_CPUFREQ + bool + default y + depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER + +if MIPS_CPUFREQ + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +if CPU_FREQ + +comment "CPUFreq processor drivers" + +config LOONGSON2_CPUFREQ + tristate "Loongson2 CPUFreq Driver" + select CPU_FREQ_TABLE + depends on MIPS_CPUFREQ + help + This option adds a CPUFreq driver for loongson processors which + support software configurable cpu frequency. + + Loongson2F and it's successors support this feature. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +endif # CPU_FREQ + +endmenu + +endif # MIPS_CPUFREQ diff --git a/arch/mips/kernel/cpufreq/Makefile b/arch/mips/kernel/cpufreq/Makefile new file mode 100644 index 00000000000..c3479a432ef --- /dev/null +++ b/arch/mips/kernel/cpufreq/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Linux/MIPS cpufreq. +# + +obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o loongson2_clock.o diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/kernel/cpufreq/loongson2_clock.c new file mode 100644 index 00000000000..d7ca256e33e --- /dev/null +++ b/arch/mips/kernel/cpufreq/loongson2_clock.c @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/cpufreq.h> +#include <linux/platform_device.h> + +#include <asm/clock.h> + +#include <loongson.h> + +static LIST_HEAD(clock_list); +static DEFINE_SPINLOCK(clock_lock); +static DEFINE_MUTEX(clock_list_sem); + +/* Minimum CLK support */ +enum { + DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT, + DC_87PT, DC_DISABLE, DC_RESV +}; + +struct cpufreq_frequency_table loongson2_clockmod_table[] = { + {DC_RESV, CPUFREQ_ENTRY_INVALID}, + {DC_ZERO, CPUFREQ_ENTRY_INVALID}, + {DC_25PT, 0}, + {DC_37PT, 0}, + {DC_50PT, 0}, + {DC_62PT, 0}, + {DC_75PT, 0}, + {DC_87PT, 0}, + {DC_DISABLE, 0}, + {DC_RESV, CPUFREQ_TABLE_END}, +}; +EXPORT_SYMBOL_GPL(loongson2_clockmod_table); + +static struct clk cpu_clk = { + .name = "cpu_clk", + .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, + .rate = 800000000, +}; + +struct clk *clk_get(struct device *dev, const char *id) +{ + return &cpu_clk; +} +EXPORT_SYMBOL(clk_get); + +static void propagate_rate(struct clk *clk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clock_list, node) { + if (likely(clkp->parent != clk)) + continue; + if (likely(clkp->ops && clkp->ops->recalc)) + clkp->ops->recalc(clkp); + if (unlikely(clkp->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clkp); + } +} + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + return clk_set_rate_ex(clk, rate, 0); +} +EXPORT_SYMBOL_GPL(clk_set_rate); + +int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id) +{ + int ret = 0; + int regval; + int i; + + if (likely(clk->ops && clk->ops->set_rate)) { + unsigned long flags; + + spin_lock_irqsave(&clock_lock, flags); + ret = clk->ops->set_rate(clk, rate, algo_id); + spin_unlock_irqrestore(&clock_lock, flags); + } + + if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clk); + + for (i = 0; loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END; + i++) { + if (loongson2_clockmod_table[i].frequency == + CPUFREQ_ENTRY_INVALID) + continue; + if (rate == loongson2_clockmod_table[i].frequency) + break; + } + if (rate != loongson2_clockmod_table[i].frequency) + return -ENOTSUPP; + + clk->rate = rate; + + regval = LOONGSON_CHIPCFG0; + regval = (regval & ~0x7) | (loongson2_clockmod_table[i].index - 1); + LOONGSON_CHIPCFG0 = regval; + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_rate_ex); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (likely(clk->ops && clk->ops->round_rate)) { + unsigned long flags, rounded; + + spin_lock_irqsave(&clock_lock, flags); + rounded = clk->ops->round_rate(clk, rate); + spin_unlock_irqrestore(&clock_lock, flags); + + return rounded; + } + + return rate; +} +EXPORT_SYMBOL_GPL(clk_round_rate); + +/* + * This is the simple version of Loongson-2 wait, Maybe we need do this in + * interrupt disabled content + */ + +DEFINE_SPINLOCK(loongson2_wait_lock); +void loongson2_cpu_wait(void) +{ + u32 cpu_freq; + unsigned long flags; + + spin_lock_irqsave(&loongson2_wait_lock, flags); + cpu_freq = LOONGSON_CHIPCFG0; + LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */ + LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */ + spin_unlock_irqrestore(&loongson2_wait_lock, flags); +} +EXPORT_SYMBOL_GPL(loongson2_cpu_wait); diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c new file mode 100644 index 00000000000..2f6a0b147ab --- /dev/null +++ b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c @@ -0,0 +1,227 @@ +/* + * Cpufreq driver for the loongson-2 processors + * + * The 2E revision of loongson processor not support this feature. + * + * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/sched.h> /* set_cpus_allowed() */ +#include <linux/delay.h> +#include <linux/platform_device.h> + +#include <asm/clock.h> + +#include <loongson.h> + +static uint nowait; + +static struct clk *cpuclk; + +static void (*saved_cpu_wait) (void); + +static int loongson2_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data); + +static struct notifier_block loongson2_cpufreq_notifier_block = { + .notifier_call = loongson2_cpu_freq_notifier +}; + +static int loongson2_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + if (val == CPUFREQ_POSTCHANGE) + current_cpu_data.udelay_val = loops_per_jiffy; + + return 0; +} + +static unsigned int loongson2_cpufreq_get(unsigned int cpu) +{ + return clk_get_rate(cpuclk); +} + +/* + * Here we notify other drivers of the proposed change and the final change. + */ +static int loongson2_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int cpu = policy->cpu; + unsigned int newstate = 0; + cpumask_t cpus_allowed; + struct cpufreq_freqs freqs; + unsigned int freq; + + if (!cpu_online(cpu)) + return -ENODEV; + + cpus_allowed = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + + if (cpufreq_frequency_table_target + (policy, &loongson2_clockmod_table[0], target_freq, relation, + &newstate)) + return -EINVAL; + + freq = + ((cpu_clock_freq / 1000) * + loongson2_clockmod_table[newstate].index) / 8; + if (freq < policy->min || freq > policy->max) + return -EINVAL; + + pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000); + + freqs.cpu = cpu; + freqs.old = loongson2_cpufreq_get(cpu); + freqs.new = freq; + freqs.flags = 0; + + if (freqs.new == freqs.old) + return 0; + + /* notifiers */ + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + set_cpus_allowed(current, cpus_allowed); + + /* setting the cpu frequency */ + clk_set_rate(cpuclk, freq); + + /* notifiers */ + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + pr_debug("cpufreq: set frequency %u kHz\n", freq); + + return 0; +} + +static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + int i; + + if (!cpu_online(policy->cpu)) + return -ENODEV; + + cpuclk = clk_get(NULL, "cpu_clk"); + if (IS_ERR(cpuclk)) { + printk(KERN_ERR "cpufreq: couldn't get CPU clk\n"); + return PTR_ERR(cpuclk); + } + + cpuclk->rate = cpu_clock_freq / 1000; + if (!cpuclk->rate) + return -EINVAL; + + /* clock table init */ + for (i = 2; + (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END); + i++) + loongson2_clockmod_table[i].frequency = (cpuclk->rate * i) / 8; + + policy->cur = loongson2_cpufreq_get(policy->cpu); + + cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0], + policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, + &loongson2_clockmod_table[0]); +} + +static int loongson2_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, + &loongson2_clockmod_table[0]); +} + +static int loongson2_cpufreq_exit(struct cpufreq_policy *policy) +{ + clk_put(cpuclk); + return 0; +} + +static struct freq_attr *loongson2_table_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver loongson2_cpufreq_driver = { + .owner = THIS_MODULE, + .name = "loongson2", + .init = loongson2_cpufreq_cpu_init, + .verify = loongson2_cpufreq_verify, + .target = loongson2_cpufreq_target, + .get = loongson2_cpufreq_get, + .exit = loongson2_cpufreq_exit, + .attr = loongson2_table_attr, +}; + +static struct platform_device_id platform_device_ids[] = { + { + .name = "loongson2_cpufreq", + }, + {} +}; + +MODULE_DEVICE_TABLE(platform, platform_device_ids); + +static struct platform_driver platform_driver = { + .driver = { + .name = "loongson2_cpufreq", + .owner = THIS_MODULE, + }, + .id_table = platform_device_ids, +}; + +static int __init cpufreq_init(void) +{ + int ret; + + /* Register platform stuff */ + ret = platform_driver_register(&platform_driver); + if (ret) + return ret; + + pr_info("cpufreq: Loongson-2F CPU frequency driver.\n"); + + cpufreq_register_notifier(&loongson2_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + ret = cpufreq_register_driver(&loongson2_cpufreq_driver); + + if (!ret && !nowait) { + saved_cpu_wait = cpu_wait; + cpu_wait = loongson2_cpu_wait; + } + + return ret; +} + +static void __exit cpufreq_exit(void) +{ + if (!nowait && saved_cpu_wait) + cpu_wait = saved_cpu_wait; + cpufreq_unregister_driver(&loongson2_cpufreq_driver); + cpufreq_unregister_notifier(&loongson2_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + platform_driver_unregister(&platform_driver); +} + +module_init(cpufreq_init); +module_exit(cpufreq_exit); + +module_param(nowait, uint, 0644); +MODULE_PARM_DESC(nowait, "Disable Loongson-2F specific wait"); + +MODULE_AUTHOR("Yanhua <yanh@lemote.com>"); +MODULE_DESCRIPTION("cpufreq driver for Loongson2F"); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c new file mode 100644 index 00000000000..a27c16c8690 --- /dev/null +++ b/arch/mips/kernel/csrc-powertv.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2008 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* + * The file comes from kernel/csrc-r4k.c + */ +#include <linux/clocksource.h> +#include <linux/init.h> + +#include <asm/time.h> /* Not included in linux/time.h */ + +#include <asm/mach-powertv/asic_regs.h> +#include "powertv-clock.h" + +/* MIPS PLL Register Definitions */ +#define PLL_GET_M(x) (((x) >> 8) & 0x000000FF) +#define PLL_GET_N(x) (((x) >> 16) & 0x000000FF) +#define PLL_GET_P(x) (((x) >> 24) & 0x00000007) + +/* + * returns: Clock frequency in kHz + */ +unsigned int __init mips_get_pll_freq(void) +{ + unsigned int pll_reg, m, n, p; + unsigned int fin = 54000; /* Base frequency in kHz */ + unsigned int fout; + + /* Read PLL register setting */ + pll_reg = asic_read(mips_pll_setup); + m = PLL_GET_M(pll_reg); + n = PLL_GET_N(pll_reg); + p = PLL_GET_P(pll_reg); + pr_info("MIPS PLL Register:0x%x M=%d N=%d P=%d\n", pll_reg, m, n, p); + + /* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */ + fout = ((2 * n * fin) / (m * (0x01 << p))); + + pr_info("MIPS Clock Freq=%d kHz\n", fout); + + return fout; +} + +static cycle_t c0_hpt_read(struct clocksource *cs) +{ + return read_c0_count(); +} + +static struct clocksource clocksource_mips = { + .name = "powertv-counter", + .read = c0_hpt_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init powertv_c0_hpt_clocksource_init(void) +{ + unsigned int pll_freq = mips_get_pll_freq(); + + pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000, + (pll_freq % 1000) * 100 / 1000); + + mips_hpt_frequency = pll_freq / 2 * 1000; + + clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; + + clocksource_set_clock(&clocksource_mips, mips_hpt_frequency); + + clocksource_register(&clocksource_mips); +} + +/** + * struct tim_c - free running counter + * @hi: High 16 bits of the counter + * @lo: Low 32 bits of the counter + * + * Lays out the structure of the free running counter in memory. This counter + * increments at a rate of 27 MHz/8 on all platforms. + */ +struct tim_c { + unsigned int hi; + unsigned int lo; +}; + +static struct tim_c *tim_c; + +static cycle_t tim_c_read(struct clocksource *cs) +{ + unsigned int hi; + unsigned int next_hi; + unsigned int lo; + + hi = readl(&tim_c->hi); + + for (;;) { + lo = readl(&tim_c->lo); + next_hi = readl(&tim_c->hi); + if (next_hi == hi) + break; + hi = next_hi; + } + +pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo); + return ((u64) hi << 32) | lo; +} + +#define TIM_C_SIZE 48 /* # bits in the timer */ + +static struct clocksource clocksource_tim_c = { + .name = "powertv-tim_c", + .read = tim_c_read, + .mask = CLOCKSOURCE_MASK(TIM_C_SIZE), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +/** + * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock + * + * The hard part here is coming up with a constant k and shift s such that + * the 48-bit TIM_C value multiplied by k doesn't overflow and that value, + * when shifted right by s, yields the corresponding number of nanoseconds. + * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to + * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the + * number of nanoseconds. Since the TIM_C value has 48 bits and the math is + * done in 64 bits, avoiding an overflow means that k must be less than + * 64 - 48 = 16 bits. + */ +static void __init powertv_tim_c_clocksource_init(void) +{ + int prescale; + unsigned long dividend; + unsigned long k; + int s; + const int max_k_bits = (64 - 48) - 1; + const unsigned long billion = 1000000000; + const unsigned long counts_per_second = 27000000 / 8; + + prescale = BITS_PER_LONG - ilog2(billion) - 1; + dividend = billion << prescale; + k = dividend / counts_per_second; + s = ilog2(k) - max_k_bits; + + if (s < 0) + s = prescale; + + else { + k >>= s; + s += prescale; + } + + clocksource_tim_c.mult = k; + clocksource_tim_c.shift = s; + clocksource_tim_c.rating = 200; + + clocksource_register(&clocksource_tim_c); + tim_c = (struct tim_c *) asic_reg_addr(tim_ch); +} + +/** + powertv_clocksource_init - initialize all clocksources + */ +void __init powertv_clocksource_init(void) +{ + powertv_c0_hpt_clocksource_init(); + powertv_tim_c_clocksource_init(); +} diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c new file mode 100644 index 00000000000..68b067040d8 --- /dev/null +++ b/arch/mips/kernel/ftrace.c @@ -0,0 +1,275 @@ +/* + * Code for replacing ftrace calls with jumps. + * + * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com> + * Copyright (C) 2009 DSLab, Lanzhou University, China + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * Thanks goes to Steven Rostedt for writing the original x86 version. + */ + +#include <linux/uaccess.h> +#include <linux/init.h> +#include <linux/ftrace.h> + +#include <asm/cacheflush.h> +#include <asm/asm.h> +#include <asm/asm-offsets.h> + +#ifdef CONFIG_DYNAMIC_FTRACE + +#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */ +#define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */ +#define jump_insn_encode(op_code, addr) \ + ((unsigned int)((op_code) | (((addr) >> 2) & ADDR_MASK))) + +static unsigned int ftrace_nop = 0x00000000; + +static int ftrace_modify_code(unsigned long ip, unsigned int new_code) +{ + int faulted; + + /* *(unsigned int *)ip = new_code; */ + safe_store_code(new_code, ip, faulted); + + if (unlikely(faulted)) + return -EFAULT; + + flush_icache_range(ip, ip + 8); + + return 0; +} + +static int lui_v1; +static int jal_mcount; + +int ftrace_make_nop(struct module *mod, + struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned int new; + int faulted; + unsigned long ip = rec->ip; + + /* We have compiled module with -mlong-calls, but compiled the kernel + * without it, we need to cope with them respectively. */ + if (ip & 0x40000000) { + /* record it for ftrace_make_call */ + if (lui_v1 == 0) { + /* lui_v1 = *(unsigned int *)ip; */ + safe_load_code(lui_v1, ip, faulted); + + if (unlikely(faulted)) + return -EFAULT; + } + + /* lui v1, hi_16bit_of_mcount --> b 1f (0x10000004) + * addiu v1, v1, low_16bit_of_mcount + * move at, ra + * jalr v1 + * nop + * 1f: (ip + 12) + */ + new = 0x10000004; + } else { + /* record/calculate it for ftrace_make_call */ + if (jal_mcount == 0) { + /* We can record it directly like this: + * jal_mcount = *(unsigned int *)ip; + * Herein, jump over the first two nop instructions */ + jal_mcount = jump_insn_encode(JAL, (MCOUNT_ADDR + 8)); + } + + /* move at, ra + * jalr v1 --> nop + */ + new = ftrace_nop; + } + return ftrace_modify_code(ip, new); +} + +static int modified; /* initialized as 0 by default */ + +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned int new; + unsigned long ip = rec->ip; + + /* We just need to remove the "b ftrace_stub" at the fist time! */ + if (modified == 0) { + modified = 1; + ftrace_modify_code(addr, ftrace_nop); + } + /* ip, module: 0xc0000000, kernel: 0x80000000 */ + new = (ip & 0x40000000) ? lui_v1 : jal_mcount; + + return ftrace_modify_code(ip, new); +} + +#define FTRACE_CALL_IP ((unsigned long)(&ftrace_call)) + +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned int new; + + new = jump_insn_encode(JAL, (unsigned long)func); + + return ftrace_modify_code(FTRACE_CALL_IP, new); +} + +int __init ftrace_dyn_arch_init(void *data) +{ + /* The return code is retured via data */ + *(unsigned long *)data = 0; + + return 0; +} +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + +#ifdef CONFIG_DYNAMIC_FTRACE + +extern void ftrace_graph_call(void); +#define JMP 0x08000000 /* jump to target directly */ +#define CALL_FTRACE_GRAPH_CALLER \ + jump_insn_encode(JMP, (unsigned long)(&ftrace_graph_caller)) +#define FTRACE_GRAPH_CALL_IP ((unsigned long)(&ftrace_graph_call)) + +int ftrace_enable_ftrace_graph_caller(void) +{ + return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, + CALL_FTRACE_GRAPH_CALLER); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, ftrace_nop); +} + +#endif /* !CONFIG_DYNAMIC_FTRACE */ + +#ifndef KBUILD_MCOUNT_RA_ADDRESS +#define S_RA_SP (0xafbf << 16) /* s{d,w} ra, offset(sp) */ +#define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */ +#define OFFSET_MASK 0xffff /* stack offset range: 0 ~ PT_SIZE */ + +unsigned long ftrace_get_parent_addr(unsigned long self_addr, + unsigned long parent, + unsigned long parent_addr, + unsigned long fp) +{ + unsigned long sp, ip, ra; + unsigned int code; + int faulted; + + /* in module or kernel? */ + if (self_addr & 0x40000000) { + /* module: move to the instruction "lui v1, HI_16BIT_OF_MCOUNT" */ + ip = self_addr - 20; + } else { + /* kernel: move to the instruction "move ra, at" */ + ip = self_addr - 12; + } + + /* search the text until finding the non-store instruction or "s{d,w} + * ra, offset(sp)" instruction */ + do { + ip -= 4; + + /* get the code at "ip": code = *(unsigned int *)ip; */ + safe_load_code(code, ip, faulted); + + if (unlikely(faulted)) + return 0; + + /* If we hit the non-store instruction before finding where the + * ra is stored, then this is a leaf function and it does not + * store the ra on the stack. */ + if ((code & S_R_SP) != S_R_SP) + return parent_addr; + + } while (((code & S_RA_SP) != S_RA_SP)); + + sp = fp + (code & OFFSET_MASK); + + /* ra = *(unsigned long *)sp; */ + safe_load_stack(ra, sp, faulted); + if (unlikely(faulted)) + return 0; + + if (ra == parent) + return sp; + return 0; +} + +#endif + +/* + * Hook the return address and push it in the stack of return addrs + * in current thread info. + */ +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, + unsigned long fp) +{ + unsigned long old; + struct ftrace_graph_ent trace; + unsigned long return_hooker = (unsigned long) + &return_to_handler; + int faulted; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + /* "parent" is the stack address saved the return address of the caller + * of _mcount. + * + * if the gcc < 4.5, a leaf function does not save the return address + * in the stack address, so, we "emulate" one in _mcount's stack space, + * and hijack it directly, but for a non-leaf function, it save the + * return address to the its own stack space, we can not hijack it + * directly, but need to find the real stack address, + * ftrace_get_parent_addr() does it! + * + * if gcc>= 4.5, with the new -mmcount-ra-address option, for a + * non-leaf function, the location of the return address will be saved + * to $12 for us, and for a leaf function, only put a zero into $12. we + * do it in ftrace_graph_caller of mcount.S. + */ + + /* old = *parent; */ + safe_load_stack(old, parent, faulted); + if (unlikely(faulted)) + goto out; +#ifndef KBUILD_MCOUNT_RA_ADDRESS + parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old, + (unsigned long)parent, + fp); + /* If fails when getting the stack address of the non-leaf function's + * ra, stop function graph tracer and return */ + if (parent == 0) + goto out; +#endif + /* *parent = return_hooker; */ + safe_store_stack(return_hooker, parent, faulted); + if (unlikely(faulted)) + goto out; + + if (ftrace_push_return_trace(old, self_addr, &trace.depth, fp) == + -EBUSY) { + *parent = old; + return; + } + + trace.func = self_addr; + + /* Only trace if the calling function expects to */ + if (!ftrace_graph_entry(&trace)) { + current->curr_ret_stack--; + *parent = old; + } + return; +out: + ftrace_graph_stop(); + WARN_ON(1); +} +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 8b0b4181219..981f86c2616 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -22,6 +22,7 @@ #include <linux/seq_file.h> #include <linux/kallsyms.h> #include <linux/kgdb.h> +#include <linux/ftrace.h> #include <asm/atomic.h> #include <asm/system.h> @@ -150,3 +151,32 @@ void __init init_IRQ(void) kgdb_early_setup = 1; #endif } + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +void __irq_entry do_IRQ(unsigned int irq) +{ + irq_enter(); + __DO_IRQ_SMTC_HOOK(irq); + generic_handle_irq(irq); + irq_exit(); +} + +#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF +/* + * To avoid inefficient and in some cases pathological re-checking of + * IRQ affinity, we have this variant that skips the affinity check. + */ + +void __irq_entry do_IRQ_no_affinity(unsigned int irq) +{ + irq_enter(); + __NO_AFFINITY_IRQ_SMTC_HOOK(irq); + generic_handle_irq(irq); + irq_exit(); +} + +#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S new file mode 100644 index 00000000000..0a9cfdb271d --- /dev/null +++ b/arch/mips/kernel/mcount.S @@ -0,0 +1,189 @@ +/* + * MIPS specific _mcount support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + * + * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China + * Author: Wu Zhangjin <wuzj@lemote.com> + */ + +#include <asm/regdef.h> +#include <asm/stackframe.h> +#include <asm/ftrace.h> + + .text + .set noreorder + .set noat + + .macro MCOUNT_SAVE_REGS + PTR_SUBU sp, PT_SIZE + PTR_S ra, PT_R31(sp) + PTR_S AT, PT_R1(sp) + PTR_S a0, PT_R4(sp) + PTR_S a1, PT_R5(sp) + PTR_S a2, PT_R6(sp) + PTR_S a3, PT_R7(sp) +#ifdef CONFIG_64BIT + PTR_S a4, PT_R8(sp) + PTR_S a5, PT_R9(sp) + PTR_S a6, PT_R10(sp) + PTR_S a7, PT_R11(sp) +#endif + .endm + + .macro MCOUNT_RESTORE_REGS + PTR_L ra, PT_R31(sp) + PTR_L AT, PT_R1(sp) + PTR_L a0, PT_R4(sp) + PTR_L a1, PT_R5(sp) + PTR_L a2, PT_R6(sp) + PTR_L a3, PT_R7(sp) +#ifdef CONFIG_64BIT + PTR_L a4, PT_R8(sp) + PTR_L a5, PT_R9(sp) + PTR_L a6, PT_R10(sp) + PTR_L a7, PT_R11(sp) +#endif +#ifdef CONFIG_64BIT + PTR_ADDIU sp, PT_SIZE +#else + PTR_ADDIU sp, (PT_SIZE + 8) +#endif +.endm + + .macro RETURN_BACK + jr ra + move ra, AT + .endm + +#ifdef CONFIG_DYNAMIC_FTRACE + +NESTED(ftrace_caller, PT_SIZE, ra) + .globl _mcount +_mcount: + b ftrace_stub + nop + lw t1, function_trace_stop + bnez t1, ftrace_stub + nop + + MCOUNT_SAVE_REGS +#ifdef KBUILD_MCOUNT_RA_ADDRESS + PTR_S t0, PT_R12(sp) /* t0 saved the location of the return address(at) by -mmcount-ra-address */ +#endif + + move a0, ra /* arg1: next ip, selfaddr */ + .globl ftrace_call +ftrace_call: + nop /* a placeholder for the call to a real tracing function */ + move a1, AT /* arg2: the caller's next ip, parent */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl ftrace_graph_call +ftrace_graph_call: + nop + nop +#endif + + MCOUNT_RESTORE_REGS + .globl ftrace_stub +ftrace_stub: + RETURN_BACK + END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ + +NESTED(_mcount, PT_SIZE, ra) + lw t1, function_trace_stop + bnez t1, ftrace_stub + nop + PTR_LA t1, ftrace_stub + PTR_L t2, ftrace_trace_function /* Prepare t2 for (1) */ + bne t1, t2, static_trace + nop + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + PTR_L t3, ftrace_graph_return + bne t1, t3, ftrace_graph_caller + nop + PTR_LA t1, ftrace_graph_entry_stub + PTR_L t3, ftrace_graph_entry + bne t1, t3, ftrace_graph_caller + nop +#endif + b ftrace_stub + nop + +static_trace: + MCOUNT_SAVE_REGS + + move a0, ra /* arg1: next ip, selfaddr */ + jalr t2 /* (1) call *ftrace_trace_function */ + move a1, AT /* arg2: the caller's next ip, parent */ + + MCOUNT_RESTORE_REGS + .globl ftrace_stub +ftrace_stub: + RETURN_BACK + END(_mcount) + +#endif /* ! CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + +NESTED(ftrace_graph_caller, PT_SIZE, ra) +#ifdef CONFIG_DYNAMIC_FTRACE + PTR_L a1, PT_R31(sp) /* load the original ra from the stack */ +#ifdef KBUILD_MCOUNT_RA_ADDRESS + PTR_L t0, PT_R12(sp) /* load the original t0 from the stack */ +#endif +#else + MCOUNT_SAVE_REGS + move a1, ra /* arg2: next ip, selfaddr */ +#endif + +#ifdef KBUILD_MCOUNT_RA_ADDRESS + bnez t0, 1f /* non-leaf func: t0 saved the location of the return address */ + nop + PTR_LA t0, PT_R1(sp) /* leaf func: get the location of at(old ra) from our own stack */ +1: move a0, t0 /* arg1: the location of the return address */ +#else + PTR_LA a0, PT_R1(sp) /* arg1: &AT -> a0 */ +#endif + jal prepare_ftrace_return +#ifdef CONFIG_FRAME_POINTER + move a2, fp /* arg3: frame pointer */ +#else +#ifdef CONFIG_64BIT + PTR_LA a2, PT_SIZE(sp) +#else + PTR_LA a2, (PT_SIZE+8)(sp) +#endif +#endif + + MCOUNT_RESTORE_REGS + RETURN_BACK + END(ftrace_graph_caller) + + .align 2 + .globl return_to_handler +return_to_handler: + PTR_SUBU sp, PT_SIZE + PTR_S v0, PT_R2(sp) + + jal ftrace_return_to_handler + PTR_S v1, PT_R3(sp) + + /* restore the real parent address: v0 -> ra */ + move ra, v0 + + PTR_L v0, PT_R2(sp) + PTR_L v1, PT_R3(sp) + jr ra + PTR_ADDIU sp, PT_SIZE +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + + .set at + .set reorder diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c index 225755d0c1f..1d04807874d 100644 --- a/arch/mips/kernel/mips_ksyms.c +++ b/arch/mips/kernel/mips_ksyms.c @@ -13,6 +13,7 @@ #include <asm/checksum.h> #include <asm/pgtable.h> #include <asm/uaccess.h> +#include <asm/ftrace.h> extern void *__bzero(void *__s, size_t __count); extern long __strncpy_from_user_nocheck_asm(char *__to, @@ -51,3 +52,7 @@ EXPORT_SYMBOL(csum_partial_copy_nocheck); EXPORT_SYMBOL(__csum_partial_copy_user); EXPORT_SYMBOL(invalid_pte_table); +#ifdef CONFIG_FUNCTION_TRACER +/* _mcount is defined in arch/mips/kernel/mcount.S */ +EXPORT_SYMBOL(_mcount); +#endif diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 2b290d70083..f9513f9e61d 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -58,8 +58,12 @@ EXPORT_SYMBOL(mips_machtype); struct boot_mem_map boot_mem_map; -static char command_line[CL_SIZE]; - char arcs_cmdline[CL_SIZE]=CONFIG_CMDLINE; +static char __initdata command_line[COMMAND_LINE_SIZE]; +char __initdata arcs_cmdline[COMMAND_LINE_SIZE]; + +#ifdef CONFIG_CMDLINE_BOOL +static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +#endif /* * mips_io_port_base is the begin of the address space to which x86 style @@ -166,26 +170,8 @@ static unsigned long __init init_initrd(void) * already set up initrd_start and initrd_end. In these cases * perfom sanity checks and use them if all looks good. */ - if (!initrd_start || initrd_end <= initrd_start) { -#ifdef CONFIG_PROBE_INITRD_HEADER - u32 *initrd_header; - - /* - * See if initrd has been added to the kernel image by - * arch/mips/boot/addinitrd.c. In that case a header is - * prepended to initrd and is made up by 8 bytes. The first - * word is a magic number and the second one is the size of - * initrd. Initrd start must be page aligned in any cases. - */ - initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8; - if (initrd_header[0] != 0x494E5244) - goto disable; - initrd_start = (unsigned long)(initrd_header + 2); - initrd_end = initrd_start + initrd_header[1]; -#else + if (!initrd_start || initrd_end <= initrd_start) goto disable; -#endif - } if (initrd_start & ~PAGE_MASK) { pr_err("initrd start must be page aligned\n"); @@ -476,8 +462,20 @@ static void __init arch_mem_init(char **cmdline_p) pr_info("Determined physical RAM map:\n"); print_memory_map(); - strlcpy(command_line, arcs_cmdline, sizeof(command_line)); - strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); +#ifdef CONFIG_CMDLINE_BOOL +#ifdef CONFIG_CMDLINE_OVERRIDE + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); +#else + if (builtin_cmdline[0]) { + strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); + strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE); + } + strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); +#endif +#else + strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); +#endif + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 6254041b942..d0c68b5d717 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -35,6 +35,15 @@ #include "signal-common.h" +static int (*save_fp_context)(struct sigcontext __user *sc); +static int (*restore_fp_context)(struct sigcontext __user *sc); + +extern asmlinkage int _save_fp_context(struct sigcontext __user *sc); +extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc); + +extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc); +extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc); + /* * Horribly complicated - with the bloody RM9000 workarounds enabled * the signal trampolines is moving to the end of the structure so we can @@ -709,3 +718,40 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, key_replace_session_keyring(); } } + +#ifdef CONFIG_SMP +static int smp_save_fp_context(struct sigcontext __user *sc) +{ + return raw_cpu_has_fpu + ? _save_fp_context(sc) + : fpu_emulator_save_context(sc); +} + +static int smp_restore_fp_context(struct sigcontext __user *sc) +{ + return raw_cpu_has_fpu + ? _restore_fp_context(sc) + : fpu_emulator_restore_context(sc); +} +#endif + +static int signal_setup(void) +{ +#ifdef CONFIG_SMP + /* For now just do the cpu_has_fpu check when the functions are invoked */ + save_fp_context = smp_save_fp_context; + restore_fp_context = smp_restore_fp_context; +#else + if (cpu_has_fpu) { + save_fp_context = _save_fp_context; + restore_fp_context = _restore_fp_context; + } else { + save_fp_context = fpu_emulator_save_context; + restore_fp_context = fpu_emulator_restore_context; + } +#endif + + return 0; +} + +arch_initcall(signal_setup); diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 2e74075ac0c..03abaf048f0 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -35,6 +35,15 @@ #include "signal-common.h" +static int (*save_fp_context32)(struct sigcontext32 __user *sc); +static int (*restore_fp_context32)(struct sigcontext32 __user *sc); + +extern asmlinkage int _save_fp_context32(struct sigcontext32 __user *sc); +extern asmlinkage int _restore_fp_context32(struct sigcontext32 __user *sc); + +extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 __user *sc); +extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user *sc); + /* * Including <asm/unistd.h> would give use the 64-bit syscall numbers ... */ @@ -828,3 +837,18 @@ SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid, info.si_code |= __SI_CHLD; return copy_siginfo_to_user32(uinfo, &info); } + +static int signal32_init(void) +{ + if (cpu_has_fpu) { + save_fp_context32 = _save_fp_context32; + restore_fp_context32 = _restore_fp_context32; + } else { + save_fp_context32 = fpu_emulator_save_context32; + restore_fp_context32 = fpu_emulator_restore_context32; + } + + return 0; +} + +arch_initcall(signal32_init); diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index e72e6844d13..6cdca1956b7 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -32,6 +32,7 @@ #include <linux/cpumask.h> #include <linux/cpu.h> #include <linux/err.h> +#include <linux/ftrace.h> #include <asm/atomic.h> #include <asm/cpu.h> @@ -130,7 +131,7 @@ asmlinkage __cpuinit void start_secondary(void) /* * Call into both interrupt handlers, as we share the IPI for them */ -void smp_call_function_interrupt(void) +void __irq_entry smp_call_function_interrupt(void) { irq_enter(); generic_smp_call_function_single_interrupt(); diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index a38e3ee9551..23499b5bd9c 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -25,6 +25,7 @@ #include <linux/interrupt.h> #include <linux/kernel_stat.h> #include <linux/module.h> +#include <linux/ftrace.h> #include <asm/cpu.h> #include <asm/processor.h> @@ -939,23 +940,29 @@ static void ipi_call_interrupt(void) DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); -void ipi_decode(struct smtc_ipi *pipi) +static void __irq_entry smtc_clock_tick_interrupt(void) { unsigned int cpu = smp_processor_id(); struct clock_event_device *cd; + int irq = MIPS_CPU_IRQ_BASE + 1; + + irq_enter(); + kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); + irq_exit(); +} + +void ipi_decode(struct smtc_ipi *pipi) +{ void *arg_copy = pipi->arg; int type_copy = pipi->type; - int irq = MIPS_CPU_IRQ_BASE + 1; smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: - irq_enter(); - kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); - cd = &per_cpu(mips_clockevent_device, cpu); - cd->event_handler(cd); - irq_exit(); + smtc_clock_tick_interrupt(); break; case LINUX_SMP_IPI: diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 0a18b4c62af..308e4346086 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -25,10 +25,12 @@ #include <linux/ptrace.h> #include <linux/kgdb.h> #include <linux/kdebug.h> +#include <linux/notifier.h> #include <asm/bootinfo.h> #include <asm/branch.h> #include <asm/break.h> +#include <asm/cop2.h> #include <asm/cpu.h> #include <asm/dsp.h> #include <asm/fpu.h> @@ -79,10 +81,6 @@ extern asmlinkage void handle_reserved(void); extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, int has_fpu); -#ifdef CONFIG_CPU_CAVIUM_OCTEON -extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task); -#endif - void (*board_be_init)(void); int (*board_be_handler)(struct pt_regs *regs, int is_fixup); void (*board_nmi_handler_setup)(void); @@ -857,6 +855,44 @@ static void mt_ase_fp_affinity(void) #endif /* CONFIG_MIPS_MT_FPAFF */ } +/* + * No lock; only written during early bootup by CPU 0. + */ +static RAW_NOTIFIER_HEAD(cu2_chain); + +int __ref register_cu2_notifier(struct notifier_block *nb) +{ + return raw_notifier_chain_register(&cu2_chain, nb); +} + +int cu2_notifier_call_chain(unsigned long val, void *v) +{ + return raw_notifier_call_chain(&cu2_chain, val, v); +} + +static int default_cu2_call(struct notifier_block *nfb, unsigned long action, + void *data) +{ + struct pt_regs *regs = data; + + switch (action) { + default: + die_if_kernel("Unhandled kernel unaligned access or invalid " + "instruction", regs); + /* Fall through */ + + case CU2_EXCEPTION: + force_sig(SIGILL, current); + } + + return NOTIFY_OK; +} + +static struct notifier_block default_cu2_notifier = { + .notifier_call = default_cu2_call, + .priority = 0x80000000, /* Run last */ +}; + asmlinkage void do_cpu(struct pt_regs *regs) { unsigned int __user *epc; @@ -920,17 +956,9 @@ asmlinkage void do_cpu(struct pt_regs *regs) return; case 2: -#ifdef CONFIG_CPU_CAVIUM_OCTEON - prefetch(¤t->thread.cp2); - local_irq_save(flags); - KSTK_STATUS(current) |= ST0_CU2; - status = read_c0_status(); - write_c0_status(status | ST0_CU2); - octeon_cop2_restore(&(current->thread.cp2)); - write_c0_status(status & ~ST0_CU2); - local_irq_restore(flags); - return; -#endif + raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs); + break; + case 3: break; } @@ -1367,77 +1395,6 @@ void *set_vi_handler(int n, vi_handler_t addr) return set_vi_srs_handler(n, addr, 0); } -/* - * This is used by native signal handling - */ -asmlinkage int (*save_fp_context)(struct sigcontext __user *sc); -asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc); - -extern asmlinkage int _save_fp_context(struct sigcontext __user *sc); -extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc); - -extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc); -extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc); - -#ifdef CONFIG_SMP -static int smp_save_fp_context(struct sigcontext __user *sc) -{ - return raw_cpu_has_fpu - ? _save_fp_context(sc) - : fpu_emulator_save_context(sc); -} - -static int smp_restore_fp_context(struct sigcontext __user *sc) -{ - return raw_cpu_has_fpu - ? _restore_fp_context(sc) - : fpu_emulator_restore_context(sc); -} -#endif - -static inline void signal_init(void) -{ -#ifdef CONFIG_SMP - /* For now just do the cpu_has_fpu check when the functions are invoked */ - save_fp_context = smp_save_fp_context; - restore_fp_context = smp_restore_fp_context; -#else - if (cpu_has_fpu) { - save_fp_context = _save_fp_context; - restore_fp_context = _restore_fp_context; - } else { - save_fp_context = fpu_emulator_save_context; - restore_fp_context = fpu_emulator_restore_context; - } -#endif -} - -#ifdef CONFIG_MIPS32_COMPAT - -/* - * This is used by 32-bit signal stuff on the 64-bit kernel - */ -asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc); -asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc); - -extern asmlinkage int _save_fp_context32(struct sigcontext32 __user *sc); -extern asmlinkage int _restore_fp_context32(struct sigcontext32 __user *sc); - -extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 __user *sc); -extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user *sc); - -static inline void signal32_init(void) -{ - if (cpu_has_fpu) { - save_fp_context32 = _save_fp_context32; - restore_fp_context32 = _restore_fp_context32; - } else { - save_fp_context32 = fpu_emulator_save_context32; - restore_fp_context32 = fpu_emulator_restore_context32; - } -} -#endif - extern void cpu_cache_init(void); extern void tlb_init(void); extern void flush_tlb_handlers(void); @@ -1751,13 +1708,10 @@ void __init trap_init(void) else memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80); - signal_init(); -#ifdef CONFIG_MIPS32_COMPAT - signal32_init(); -#endif - local_flush_icache_range(ebase, ebase + 0x400); flush_tlb_handlers(); sort_extable(__start___dbe_table, __stop___dbe_table); + + register_cu2_notifier(&default_cu2_notifier); } diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 67bd626942a..69b039ca8d8 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -81,6 +81,7 @@ #include <asm/asm.h> #include <asm/branch.h> #include <asm/byteorder.h> +#include <asm/cop2.h> #include <asm/inst.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -451,17 +452,27 @@ static void emulate_load_store_insn(struct pt_regs *regs, */ goto sigbus; + /* + * COP2 is available to implementor for application specific use. + * It's up to applications to register a notifier chain and do + * whatever they have to do, including possible sending of signals. + */ case lwc2_op: + cu2_notifier_call_chain(CU2_LWC2_OP, regs); + break; + case ldc2_op: + cu2_notifier_call_chain(CU2_LDC2_OP, regs); + break; + case swc2_op: + cu2_notifier_call_chain(CU2_SWC2_OP, regs); + break; + case sdc2_op: - /* - * These are the coprocessor 2 load/stores. The current - * implementations don't use cp2 and cp2 should always be - * disabled in c0_status. So send SIGILL. - * (No longer true: The Sony Praystation uses cp2 for - * 3D matrix operations. Dunno if that thingy has a MMU ...) - */ + cu2_notifier_call_chain(CU2_SDC2_OP, regs); + break; + default: /* * Pheeee... We encountered an yet unknown instruction or diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 162b29954ba..f25df73db92 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -46,6 +46,7 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT + IRQENTRY_TEXT *(.text.*) *(.fixup) *(.gnu.warning) diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c index 0bb6037afba..8e388da1926 100644 --- a/arch/mips/lasat/picvue_proc.c +++ b/arch/mips/lasat/picvue_proc.c @@ -4,12 +4,14 @@ * Brian Murphy <brian.murphy@eicon.com> * */ +#include <linux/bug.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> #include <linux/errno.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/timer.h> @@ -38,12 +40,9 @@ static void pvc_display(unsigned long data) static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0); -static int pvc_proc_read_line(char *page, char **start, - off_t off, int count, - int *eof, void *data) +static int pvc_line_proc_show(struct seq_file *m, void *v) { - char *origpage = page; - int lineno = *(int *)data; + int lineno = *(int *)m->private; if (lineno < 0 || lineno > PVC_NLINES) { printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno); @@ -51,45 +50,66 @@ static int pvc_proc_read_line(char *page, char **start, } mutex_lock(&pvc_mutex); - page += sprintf(page, "%s\n", pvc_lines[lineno]); + seq_printf(m, "%s\n", pvc_lines[lineno]); mutex_unlock(&pvc_mutex); - return page - origpage; + return 0; } -static int pvc_proc_write_line(struct file *file, const char *buffer, - unsigned long count, void *data) +static int pvc_line_proc_open(struct inode *inode, struct file *file) { - int origcount = count; - int lineno = *(int *)data; + return single_open(file, pvc_line_proc_show, PDE(inode)->data); +} - if (lineno < 0 || lineno > PVC_NLINES) { - printk(KERN_WARNING "proc_write_line: invalid lineno %d\n", - lineno); - return origcount; - } +static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) +{ + int lineno = *(int *)PDE(file->f_path.dentry->d_inode)->data; + char kbuf[PVC_LINELEN]; + size_t len; + + BUG_ON(lineno < 0 || lineno > PVC_NLINES); - if (count > PVC_LINELEN) - count = PVC_LINELEN; + len = min(count, sizeof(kbuf) - 1); + if (copy_from_user(kbuf, buf, len)) + return -EFAULT; + kbuf[len] = '\0'; - if (buffer[count-1] == '\n') - count--; + if (len > 0 && kbuf[len - 1] == '\n') + len--; mutex_lock(&pvc_mutex); - strncpy(pvc_lines[lineno], buffer, count); - pvc_lines[lineno][count] = '\0'; + strncpy(pvc_lines[lineno], kbuf, len); + pvc_lines[lineno][len] = '\0'; mutex_unlock(&pvc_mutex); tasklet_schedule(&pvc_display_tasklet); - return origcount; + return count; } -static int pvc_proc_write_scroll(struct file *file, const char *buffer, - unsigned long count, void *data) +static const struct file_operations pvc_line_proc_fops = { + .owner = THIS_MODULE, + .open = pvc_line_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = pvc_line_proc_write, +}; + +static ssize_t pvc_scroll_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) { - int origcount = count; - int cmd = simple_strtol(buffer, NULL, 10); + char kbuf[42]; + size_t len; + int cmd; + + len = min(count, sizeof(kbuf) - 1); + if (copy_from_user(kbuf, buf, len)) + return -EFAULT; + kbuf[len] = '\0'; + + cmd = simple_strtol(kbuf, NULL, 10); mutex_lock(&pvc_mutex); if (scroll_interval != 0) @@ -110,22 +130,31 @@ static int pvc_proc_write_scroll(struct file *file, const char *buffer, } mutex_unlock(&pvc_mutex); - return origcount; + return count; } -static int pvc_proc_read_scroll(char *page, char **start, - off_t off, int count, - int *eof, void *data) +static int pvc_scroll_proc_show(struct seq_file *m, void *v) { - char *origpage = page; - mutex_lock(&pvc_mutex); - page += sprintf(page, "%d\n", scroll_dir * scroll_interval); + seq_printf(m, "%d\n", scroll_dir * scroll_interval); mutex_unlock(&pvc_mutex); - return page - origpage; + return 0; } +static int pvc_scroll_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, pvc_scroll_proc_show, NULL); +} + +static const struct file_operations pvc_scroll_proc_fops = { + .owner = THIS_MODULE, + .open = pvc_scroll_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = pvc_scroll_proc_write, +}; void pvc_proc_timerfunc(unsigned long data) { @@ -163,22 +192,16 @@ static int __init pvc_proc_init(void) pvc_linedata[i] = i; } for (i = 0; i < PVC_NLINES; i++) { - proc_entry = create_proc_entry(pvc_linename[i], 0644, - pvc_display_dir); + proc_entry = proc_create_data(pvc_linename[i], 0644, pvc_display_dir, + &pvc_line_proc_fops, &pvc_linedata[i]); if (proc_entry == NULL) goto error; - - proc_entry->read_proc = pvc_proc_read_line; - proc_entry->write_proc = pvc_proc_write_line; - proc_entry->data = &pvc_linedata[i]; } - proc_entry = create_proc_entry("scroll", 0644, pvc_display_dir); + proc_entry = proc_create("scroll", 0644, pvc_display_dir, + &pvc_scroll_proc_fops); if (proc_entry == NULL) goto error; - proc_entry->write_proc = pvc_proc_write_scroll; - proc_entry->read_proc = pvc_proc_read_scroll; - init_timer(&timer); timer.function = pvc_proc_timerfunc; diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c index 6acc6cb85f0..20fde19a5fb 100644 --- a/arch/mips/lasat/prom.c +++ b/arch/mips/lasat/prom.c @@ -100,8 +100,8 @@ void __init prom_init(void) /* Get the command line */ if (argc > 0) { - strncpy(arcs_cmdline, argv[0], CL_SIZE-1); - arcs_cmdline[CL_SIZE-1] = '\0'; + strncpy(arcs_cmdline, argv[0], COMMAND_LINE_SIZE-1); + arcs_cmdline[COMMAND_LINE_SIZE-1] = '\0'; } /* Set the I/O base address */ diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 14b9a28a4ae..d87ffd04cb0 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -204,7 +204,7 @@ static ctl_table lasat_table[] = { .maxlen = sizeof(int), .mode = 0644, .proc_handler = proc_lasat_prid, -. }, + }, #ifdef CONFIG_INET { .procname = "ipaddr", diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index d45092505fa..3df1967dea0 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -1,31 +1,85 @@ choice - prompt "Machine Type" - depends on MACH_LOONGSON + prompt "Machine Type" + depends on MACH_LOONGSON config LEMOTE_FULOONG2E - bool "Lemote Fuloong(2e) mini-PC" - select ARCH_SPARSEMEM_ENABLE - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2E - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HW_HAS_PCI - select I8259 - select ISA - select IRQ_CPU - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_HARDIRQS_NO__DO_IRQ - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB - help - Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge - - Lemote Fuloong(2e) mini PC have a VIA686B south bridge. + bool "Lemote Fuloong(2e) mini-PC" + select ARCH_SPARSEMEM_ENABLE + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_LOONGSON2E + select DMA_NONCOHERENT + select BOOT_ELF32 + select BOARD_SCACHE + select HW_HAS_PCI + select I8259 + select ISA + select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_EARLY_PRINTK + select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select CPU_HAS_WB + help + Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and + an FPGA northbridge + + Lemote Fuloong(2e) mini PC have a VIA686B south bridge. + +config LEMOTE_MACH2F + bool "Lemote Loongson 2F family machines" + select ARCH_SPARSEMEM_ENABLE + select BOARD_SCACHE + select BOOT_ELF32 + select CEVT_R4K if ! MIPS_EXTERNAL_TIMER + select CPU_HAS_WB + select CS5536 + select CSRC_R4K if ! MIPS_EXTERNAL_TIMER + select DMA_NONCOHERENT + select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select HW_HAS_PCI + select I8259 + select IRQ_CPU + select ISA + select SYS_HAS_CPU_LOONGSON2F + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + help + Lemote Loongson 2F family machines utilize the 2F revision of + Loongson processor and the AMD CS5536 south bridge. + + These family machines include fuloong2f mini PC, yeeloong2f notebook, + LingLoong allinone PC and so forth. endchoice + +config CS5536 + bool + +config CS5536_MFGPT + bool "CS5536 MFGPT Timer" + depends on CS5536 + select MIPS_EXTERNAL_TIMER + help + This option enables the mfgpt0 timer of AMD CS5536. + + If you want to enable the Loongson2 CPUFreq Driver, Please enable + this option at first, otherwise, You will get wrong system time. + + If unsure, say Yes. + +config LOONGSON_SUSPEND + bool + default y + depends on CPU_SUPPORTS_CPUFREQ && SUSPEND + +config LOONGSON_UART_BASE + bool + default y + depends on EARLY_PRINTK || SERIAL_8250 diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile index 39048c455d7..2b76cb0fb07 100644 --- a/arch/mips/loongson/Makefile +++ b/arch/mips/loongson/Makefile @@ -9,3 +9,9 @@ obj-$(CONFIG_MACH_LOONGSON) += common/ # obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ + +# +# Lemote loongson2f family machines +# + +obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index 656b3cc0a2a..7668c4de115 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -3,9 +3,23 @@ # obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ - pci.o bonito-irq.o mem.o machtype.o + pci.o bonito-irq.o mem.o machtype.o platform.o # -# Early printk support +# Serial port support # obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_SERIAL_8250) += serial.o +obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o + +# +# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure +# space +# +obj-$(CONFIG_CS5536) += cs5536/ + +# +# Suspend Support +# + +obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c index 3e31e7ad713..2dc2a4cc632 100644 --- a/arch/mips/loongson/common/bonito-irq.c +++ b/arch/mips/loongson/common/bonito-irq.c @@ -12,18 +12,19 @@ * option) any later version. */ #include <linux/interrupt.h> +#include <linux/compiler.h> #include <loongson.h> static inline void bonito_irq_enable(unsigned int irq) { - BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE)); + LOONGSON_INTENSET = (1 << (irq - LOONGSON_IRQ_BASE)); mmiowb(); } static inline void bonito_irq_disable(unsigned int irq) { - BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE)); + LOONGSON_INTENCLR = (1 << (irq - LOONGSON_IRQ_BASE)); mmiowb(); } @@ -35,7 +36,7 @@ static struct irq_chip bonito_irq_type = { .unmask = bonito_irq_enable, }; -static struct irqaction dma_timeout_irqaction = { +static struct irqaction __maybe_unused dma_timeout_irqaction = { .handler = no_action, .name = "dma_timeout", }; @@ -44,8 +45,10 @@ void bonito_irq_init(void) { u32 i; - for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++) + for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++) set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq); - setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction); +#ifdef CONFIG_CPU_LOONGSON2E + setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction); +#endif } diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c index 75f1b243ee4..7ad47f22747 100644 --- a/arch/mips/loongson/common/cmdline.c +++ b/arch/mips/loongson/common/cmdline.c @@ -9,7 +9,7 @@ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzj@lemote.com * * This program is free software; you can redistribute it and/or modify it @@ -49,4 +49,6 @@ void __init prom_init_cmdline(void) strcat(arcs_cmdline, " console=ttyS0,115200"); if ((strstr(arcs_cmdline, "root=")) == NULL) strcat(arcs_cmdline, " root=/dev/hda1"); + + prom_init_machtype(); } diff --git a/arch/mips/loongson/common/cs5536/Makefile b/arch/mips/loongson/common/cs5536/Makefile new file mode 100644 index 00000000000..510d4cdc237 --- /dev/null +++ b/arch/mips/loongson/common/cs5536/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for CS5536 support. +# + +obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \ + cs5536_isa.o cs5536_ehci.o + +# +# Enable cs5536 mfgpt Timer +# +obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/loongson/common/cs5536/cs5536_acc.c b/arch/mips/loongson/common/cs5536/cs5536_acc.c new file mode 100644 index 00000000000..b49485f187e --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_acc.c @@ -0,0 +1,140 @@ +/* + * the ACC Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_acc_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + lo |= (0x03 << 8); + else + lo &= ~(0x03 << 8); + _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_ACC_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + value &= 0xfffffffc; + hi = 0xA0000000 | ((value & 0x000ff000) >> 12); + lo = 0x000fff80 | ((value & 0x00000fff) << 20); + _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo); + } + break; + case PCI_ACC_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + /* disable all the usb interrupt in PIC */ + lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT); + if (value) /* enable all the acc interrupt in PIC */ + lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); + break; + default: + break; + } +} + +u32 pci_acc_read_reg(int reg) +{ + u32 hi, lo; + u32 conf_data = 0; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); + if (((lo & 0xfff00000) || (hi & 0x000000ff)) + && ((hi & 0xf0000000) == 0xa0000000)) + conf_data |= PCI_COMMAND_IO; + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if ((lo & 0x300) == 0x300) + conf_data |= PCI_COMMAND_MASTER; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_ACC_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_ACC_FLAG) { + conf_data = CS5536_ACC_RANGE | + PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~SOFT_BAR_ACC_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); + conf_data = (hi & 0x000000ff) << 12; + conf_data |= (lo & 0xfff00000) >> 20; + conf_data |= 0x01; + conf_data &= ~0x02; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR); + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c new file mode 100644 index 00000000000..74f9c59d36a --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c @@ -0,0 +1,158 @@ +/* + * the EHCI Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_ehci_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + hi |= PCI_COMMAND_MASTER; + else + hi &= ~PCI_COMMAND_MASTER; + + if (value & PCI_COMMAND_MEMORY) + hi |= PCI_COMMAND_MEMORY; + else + hi &= ~PCI_COMMAND_MEMORY; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_EHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if ((value & 0x01) == 0x00) { + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + + value &= 0xfffffff0; + hi = 0x40000000 | ((value & 0xff000000) >> 24); + lo = 0x000fffff | ((value & 0x00fff000) << 8); + _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo); + } + break; + case PCI_EHCI_LEGSMIEN_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + hi &= 0x003f0000; + hi |= (value & 0x3f) << 16; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + case PCI_EHCI_FLADJ_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + hi &= ~0x00003f00; + hi |= value & 0x00003f00; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + default: + break; + } +} + +u32 pci_ehci_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + if (hi & PCI_COMMAND_MASTER) + conf_data |= PCI_COMMAND_MASTER; + if (hi & PCI_COMMAND_MEMORY) + conf_data |= PCI_COMMAND_MEMORY; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_EHCI_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_EHCI_FLAG) { + conf_data = CS5536_EHCI_RANGE | + PCI_BASE_ADDRESS_SPACE_MEMORY; + lo &= ~SOFT_BAR_EHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = lo & 0xfffff000; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); + break; + case PCI_EHCI_LEGSMIEN_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = (hi & 0x003f0000) >> 16; + break; + case PCI_EHCI_LEGSMISTS_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = (hi & 0x3f000000) >> 24; + break; + case PCI_EHCI_FLADJ_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = hi & 0x00003f00; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c new file mode 100644 index 00000000000..3f61594b388 --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c @@ -0,0 +1,179 @@ +/* + * the IDE Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_ide_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + lo |= (0x03 << 4); + else + lo &= ~(0x03 << 4); + _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_CACHE_LINE_SIZE: + value &= 0x0000ff00; + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0xffffff00; + hi |= (value >> 8); + _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); + break; + case PCI_BAR4_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_IDE_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + lo = (value & 0xfffffff0) | 0x1; + _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo); + + value &= 0xfffffffc; + hi = 0x60000000 | ((value & 0x000ff000) >> 12); + lo = 0x000ffff0 | ((value & 0x00000fff) << 20); + _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo); + } + break; + case PCI_IDE_CFG_REG: + if (value == CS5536_IDE_FLASH_SIGNATURE) { + _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo); + lo |= 0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo); + } else + _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo); + break; + case PCI_IDE_DTC_REG: + _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo); + break; + case PCI_IDE_CAST_REG: + _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo); + break; + case PCI_IDE_ETC_REG: + _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo); + break; + case PCI_IDE_PM_REG: + _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo); + break; + default: + break; + } +} + +u32 pci_ide_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + if (lo & 0xfffffff0) + conf_data |= PCI_COMMAND_IO; + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if ((lo & 0x30) == 0x30) + conf_data |= PCI_COMMAND_MASTER; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_IDE_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0x000000f8; + conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi); + break; + case PCI_BAR4_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_IDE_FLAG) { + conf_data = CS5536_IDE_RANGE | + PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~SOFT_BAR_IDE_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + conf_data = lo & 0xfffffff0; + conf_data |= 0x01; + conf_data &= ~0x02; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR); + break; + case PCI_IDE_CFG_REG: + _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_DTC_REG: + _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_CAST_REG: + _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_ETC_REG: + _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); + conf_data = lo; + case PCI_IDE_PM_REG: + _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); + conf_data = lo; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c new file mode 100644 index 00000000000..b6f17f538e4 --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c @@ -0,0 +1,316 @@ +/* + * the ISA Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +/* common variables for PCI_ISA_READ/WRITE_BAR */ +static const u32 divil_msr_reg[6] = { + DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO), + DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ), + DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI), +}; + +static const u32 soft_bar_flag[6] = { + SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG, + SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG, +}; + +static const u32 sb_msr_reg[6] = { + SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2), + SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5), +}; + +static const u32 bar_space_range[6] = { + CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE, + CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE, +}; + +static const int bar_space_len[6] = { + CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH, + CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH, +}; + +/* + * enable the divil module bar space. + * + * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg + * and the RCONFx(0~5) reg to use the modules. + */ +static void divil_lbar_enable(void) +{ + u32 hi, lo; + int offset; + + /* + * The DIVIL IRQ is not used yet. and make the RCONF0 reserved. + */ + + for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { + _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); + hi |= 0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo); + } +} + +/* + * disable the divil module bar space. + */ +static void divil_lbar_disable(void) +{ + u32 hi, lo; + int offset; + + for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { + _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); + hi &= ~0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo); + } +} + +/* + * BAR write: write value to the n BAR + */ + +void pci_isa_write_bar(int n, u32 value) +{ + u32 hi = 0, lo = value; + + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= soft_bar_flag[n]; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + /* NATIVE reg */ + hi = 0x0000f001; + lo &= bar_space_range[n]; + _wrmsr(divil_msr_reg[n], hi, lo); + + /* RCONFx is 4bytes in units for I/O space */ + hi = ((value & 0x000ffffc) << 12) | + ((bar_space_len[n] - 4) << 12) | 0x01; + lo = ((value & 0x000ffffc) << 12) | 0x01; + _wrmsr(sb_msr_reg[n], hi, lo); + } +} + +/* + * BAR read: read the n BAR + */ + +u32 pci_isa_read_bar(int n) +{ + u32 conf_data = 0; + u32 hi, lo; + + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & soft_bar_flag[n]) { + conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~soft_bar_flag[n]; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(divil_msr_reg[n], &hi, &lo); + conf_data = lo & bar_space_range[n]; + conf_data |= 0x01; + conf_data &= ~0x02; + } + return conf_data; +} + +/* + * isa_write: ISA write transfer + * + * We assume that this is not a bus master transfer. + */ +void pci_isa_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + u32 temp; + + switch (reg) { + case PCI_COMMAND: + if (value & PCI_COMMAND_IO) + divil_lbar_enable(); + else + divil_lbar_disable(); + break; + case PCI_STATUS: + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + temp = lo & 0x0000ffff; + if ((value & PCI_STATUS_SIG_TARGET_ABORT) && + (lo & SB_TAS_ERR_EN)) + temp |= SB_TAS_ERR_FLAG; + + if ((value & PCI_STATUS_REC_TARGET_ABORT) && + (lo & SB_TAR_ERR_EN)) + temp |= SB_TAR_ERR_FLAG; + + if ((value & PCI_STATUS_REC_MASTER_ABORT) + && (lo & SB_MAR_ERR_EN)) + temp |= SB_MAR_ERR_FLAG; + + if ((value & PCI_STATUS_DETECTED_PARITY) + && (lo & SB_PARE_ERR_EN)) + temp |= SB_PARE_ERR_FLAG; + + lo = temp; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + break; + case PCI_CACHE_LINE_SIZE: + value &= 0x0000ff00; + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0xffffff00; + hi |= (value >> 8); + _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); + break; + case PCI_BAR0_REG: + pci_isa_write_bar(0, value); + break; + case PCI_BAR1_REG: + pci_isa_write_bar(1, value); + break; + case PCI_BAR2_REG: + pci_isa_write_bar(2, value); + break; + case PCI_BAR3_REG: + pci_isa_write_bar(3, value); + break; + case PCI_BAR4_REG: + pci_isa_write_bar(4, value); + break; + case PCI_BAR5_REG: + pci_isa_write_bar(5, value); + break; + case PCI_UART1_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); + /* disable uart1 interrupt in PIC */ + lo &= ~(0xf << 24); + if (value) /* enable uart1 interrupt in PIC */ + lo |= (CS5536_UART1_INTR << 24); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); + break; + case PCI_UART2_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); + /* disable uart2 interrupt in PIC */ + lo &= ~(0xf << 28); + if (value) /* enable uart2 interrupt in PIC */ + lo |= (CS5536_UART2_INTR << 28); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); + break; + case PCI_ISA_FIXUP_REG: + if (value) { + /* enable the TARGET ABORT/MASTER ABORT etc. */ + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + lo |= 0x00000063; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + + default: + /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */ + break; + } +} + +/* + * isa_read: ISA read transfers + * + * We assume that this is not a bus master transfer. + */ +u32 pci_isa_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + /* we just check the first LBAR for the IO enable bit, */ + /* maybe we should changed later. */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo); + if (hi & 0x01) + conf_data |= PCI_COMMAND_IO; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + conf_data |= PCI_STATUS_FAST_BACK; + + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_TAS_ERR_FLAG) + conf_data |= PCI_STATUS_SIG_TARGET_ABORT; + if (lo & SB_TAR_ERR_FLAG) + conf_data |= PCI_STATUS_REC_TARGET_ABORT; + if (lo & SB_MAR_ERR_FLAG) + conf_data |= PCI_STATUS_REC_MASTER_ABORT; + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_DETECTED_PARITY; + break; + case PCI_CLASS_REVISION: + _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_ISA_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0x000000f8; + conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi); + break; + /* + * we only use the LBAR of DIVIL, no RCONF used. + * all of them are IO space. + */ + case PCI_BAR0_REG: + return pci_isa_read_bar(0); + break; + case PCI_BAR1_REG: + return pci_isa_read_bar(1); + break; + case PCI_BAR2_REG: + return pci_isa_read_bar(2); + break; + case PCI_BAR3_REG: + break; + case PCI_BAR4_REG: + return pci_isa_read_bar(4); + break; + case PCI_BAR5_REG: + return pci_isa_read_bar(5); + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_POINTER; + break; + case PCI_INTERRUPT_LINE: + /* no interrupt used here */ + conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00); + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c new file mode 100644 index 00000000000..6cb44dbaeec --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c @@ -0,0 +1,217 @@ +/* + * CS5536 General timer functions + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu zhangjin, wuzj@lemote.com + * + * Reference: AMD Geode(TM) CS5536 Companion Device Data Book + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/clockchips.h> + +#include <asm/time.h> + +#include <cs5536/cs5536_mfgpt.h> + +DEFINE_SPINLOCK(mfgpt_lock); +EXPORT_SYMBOL(mfgpt_lock); + +static u32 mfgpt_base; + +/* + * Initialize the MFGPT timer. + * + * This is also called after resume to bring the MFGPT into operation again. + */ + +/* disable counter */ +void disable_mfgpt0_counter(void) +{ + outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP); +} +EXPORT_SYMBOL(disable_mfgpt0_counter); + +/* enable counter, comparator2 to event mode, 14.318MHz clock */ +void enable_mfgpt0_counter(void) +{ + outw(0xe310, MFGPT0_SETUP); +} +EXPORT_SYMBOL(enable_mfgpt0_counter); + +static void init_mfgpt_timer(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + spin_lock(&mfgpt_lock); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */ + outw(0, MFGPT0_CNT); /* set counter to 0 */ + enable_mfgpt0_counter(); + break; + + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + if (evt->mode == CLOCK_EVT_MODE_PERIODIC || + evt->mode == CLOCK_EVT_MODE_ONESHOT) + disable_mfgpt0_counter(); + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* The oneshot mode have very high deviation, Not use it! */ + break; + + case CLOCK_EVT_MODE_RESUME: + /* Nothing to do here */ + break; + } + spin_unlock(&mfgpt_lock); +} + +static struct clock_event_device mfgpt_clockevent = { + .name = "mfgpt", + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = init_mfgpt_timer, + .irq = CS5536_MFGPT_INTR, +}; + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + u32 basehi; + + /* + * get MFGPT base address + * + * NOTE: do not remove me, it's need for the value of mfgpt_base is + * variable + */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); + + /* ack */ + outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP); + + mfgpt_clockevent.event_handler(&mfgpt_clockevent); + + return IRQ_HANDLED; +} + +static struct irqaction irq5 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, + .name = "timer" +}; + +/* + * Initialize the conversion factor and the min/max deltas of the clock event + * structure and register the clock event source with the framework. + */ +void __init setup_mfgpt0_timer(void) +{ + u32 basehi; + struct clock_event_device *cd = &mfgpt_clockevent; + unsigned int cpu = smp_processor_id(); + + cd->cpumask = cpumask_of(cpu); + clockevent_set_clock(cd, MFGPT_TICK_RATE); + cd->max_delta_ns = clockevent_delta2ns(0xffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0xf, cd); + + /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */ + _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100); + + /* Enable Interrupt Gate 5 */ + _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000); + + /* get MFGPT base address */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); + + clockevents_register_device(cd); + + setup_irq(CS5536_MFGPT_INTR, &irq5); +} + +/* + * Since the MFGPT overflows every tick, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static cycle_t mfgpt_read(struct clocksource *cs) +{ + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + spin_lock_irqsave(&mfgpt_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + /* read the count */ + count = inw(MFGPT0_CNT); + + /* + * It's possible for count to appear to go the wrong way for this + * reason: + * + * The timer counter underflows, but we haven't handled the resulting + * interrupt and incremented jiffies yet. + * + * Previous attempts to handle these cases intelligently were buggy, so + * we just do the simple thing now. + */ + if (count < old_count && jifs == old_jifs) + count = old_count; + + old_count = count; + old_jifs = jifs; + + spin_unlock_irqrestore(&mfgpt_lock, flags); + + return (cycle_t) (jifs * COMPARE) + count; +} + +static struct clocksource clocksource_mfgpt = { + .name = "mfgpt", + .rating = 120, /* Functional for real use, but not desired */ + .read = mfgpt_read, + .mask = CLOCKSOURCE_MASK(32), + .mult = 0, + .shift = 22, +}; + +int __init init_mfgpt_clocksource(void) +{ + if (num_possible_cpus() > 1) /* MFGPT does not scale! */ + return 0; + + clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22); + return clocksource_register(&clocksource_mfgpt); +} + +arch_initcall(init_mfgpt_clocksource); diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c new file mode 100644 index 00000000000..8fdb02b6e90 --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c @@ -0,0 +1,147 @@ +/* + * the OHCI Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_ohci_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + hi |= PCI_COMMAND_MASTER; + else + hi &= ~PCI_COMMAND_MASTER; + + if (value & PCI_COMMAND_MEMORY) + hi |= PCI_COMMAND_MEMORY; + else + hi &= ~PCI_COMMAND_MEMORY; + _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_OHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if ((value & 0x01) == 0x00) { + _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); + + value &= 0xfffffff0; + hi = 0x40000000 | ((value & 0xff000000) >> 24); + lo = 0x000fffff | ((value & 0x00fff000) << 8); + _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo); + } + break; + case PCI_OHCI_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT); + if (value) /* enable all the usb interrupt in PIC */ + lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); + break; + default: + break; + } +} + +u32 pci_ohci_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + if (hi & PCI_COMMAND_MASTER) + conf_data |= PCI_COMMAND_MASTER; + if (hi & PCI_COMMAND_MEMORY) + conf_data |= PCI_COMMAND_MEMORY; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_OHCI_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_OHCI_FLAG) { + conf_data = CS5536_OHCI_RANGE | + PCI_BASE_ADDRESS_SPACE_MEMORY; + lo &= ~SOFT_BAR_OHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + conf_data = lo & 0xffffff00; + conf_data &= ~0x0000000f; /* 32bit mem */ + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); + break; + case PCI_OHCI_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + if ((lo & 0x00000f00) == CS5536_USB_INTR) + conf_data = 1; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson/common/cs5536/cs5536_pci.c new file mode 100644 index 00000000000..e23f3d7d2c1 --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_pci.c @@ -0,0 +1,87 @@ +/* + * read/write operation to the PCI config space of CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * the Virtual Support Module(VSM) for virtulizing the PCI + * configure space are defined in cs5536_modulename.c respectively, + * + * after this virtulizing, user can access the PCI configure space + * directly as a normal multi-function PCI device which follows + * the PCI-2.2 spec. + */ + +#include <linux/types.h> +#include <cs5536/cs5536_vsm.h> + +enum { + CS5536_FUNC_START = -1, + CS5536_ISA_FUNC, + reserved_func, + CS5536_IDE_FUNC, + CS5536_ACC_FUNC, + CS5536_OHCI_FUNC, + CS5536_EHCI_FUNC, + CS5536_FUNC_END, +}; + +static const cs5536_pci_vsm_write vsm_conf_write[] = { + [CS5536_ISA_FUNC] pci_isa_write_reg, + [reserved_func] NULL, + [CS5536_IDE_FUNC] pci_ide_write_reg, + [CS5536_ACC_FUNC] pci_acc_write_reg, + [CS5536_OHCI_FUNC] pci_ohci_write_reg, + [CS5536_EHCI_FUNC] pci_ehci_write_reg, +}; + +static const cs5536_pci_vsm_read vsm_conf_read[] = { + [CS5536_ISA_FUNC] pci_isa_read_reg, + [reserved_func] NULL, + [CS5536_IDE_FUNC] pci_ide_read_reg, + [CS5536_ACC_FUNC] pci_acc_read_reg, + [CS5536_OHCI_FUNC] pci_ohci_read_reg, + [CS5536_EHCI_FUNC] pci_ehci_read_reg, +}; + +/* + * write to PCI config space and transfer it to MSR write. + */ +void cs5536_pci_conf_write4(int function, int reg, u32 value) +{ + if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) + return; + if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0)) + return; + + if (vsm_conf_write[function] != NULL) + vsm_conf_write[function](reg, value); +} + +/* + * read PCI config space and transfer it to MSR access. + */ +u32 cs5536_pci_conf_read4(int function, int reg) +{ + u32 data = 0; + + if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) + return 0; + if ((reg < 0) || ((reg & 0x03) != 0)) + return 0; + if (reg > 0x100) + return 0xffffffff; + + if (vsm_conf_read[function] != NULL) + data = vsm_conf_read[function](reg); + + return data; +} diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c index bc73edc0cfd..23e7a8f8897 100644 --- a/arch/mips/loongson/common/early_printk.c +++ b/arch/mips/loongson/common/early_printk.c @@ -1,7 +1,7 @@ /* early printk support * * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (c) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzj@lemote.com * * This program is free software; you can redistribute it and/or modify it @@ -12,26 +12,29 @@ #include <linux/serial_reg.h> #include <loongson.h> -#include <machine.h> #define PORT(base, offset) (u8 *)(base + offset) -static inline unsigned int serial_in(phys_addr_t base, int offset) +static inline unsigned int serial_in(unsigned char *base, int offset) { return readb(PORT(base, offset)); } -static inline void serial_out(phys_addr_t base, int offset, int value) +static inline void serial_out(unsigned char *base, int offset, int value) { writeb(value, PORT(base, offset)); } void prom_putchar(char c) { - phys_addr_t uart_base = - (phys_addr_t) ioremap_nocache(LOONGSON_UART_BASE, 8); + int timeout; + unsigned char *uart_base; - while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) + uart_base = (unsigned char *)_loongson_uart_base; + timeout = 1024; + + while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && + (timeout-- > 0)) ; serial_out(uart_base, UART_TX, c); diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c index b9ef5038554..196d947d929 100644 --- a/arch/mips/loongson/common/env.c +++ b/arch/mips/loongson/common/env.c @@ -17,11 +17,14 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ +#include <linux/module.h> + #include <asm/bootinfo.h> #include <loongson.h> unsigned long bus_clock, cpu_clock_freq; +EXPORT_SYMBOL(cpu_clock_freq); unsigned long memsize, highmemsize; /* pmon passes arguments in 32bit pointers */ diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c index 3abe927422a..a2abd935573 100644 --- a/arch/mips/loongson/common/init.c +++ b/arch/mips/loongson/common/init.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzj@lemote.com * * This program is free software; you can redistribute it and/or modify it @@ -10,19 +10,28 @@ #include <linux/bootmem.h> -#include <asm/bootinfo.h> - #include <loongson.h> +/* Loongson CPU address windows config space base address */ +unsigned long __maybe_unused _loongson_addrwincfg_base; + void __init prom_init(void) { - /* init base address of io space */ + /* init base address of io space */ set_io_port_base((unsigned long) - ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE)); + ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + _loongson_addrwincfg_base = (unsigned long) + ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); +#endif prom_init_cmdline(); prom_init_env(); prom_init_memory(); + + /*init the uart base address */ + prom_init_uart_base(); } void __init prom_free_prom_memory(void) diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c index b32b4a3e513..20e73283197 100644 --- a/arch/mips/loongson/common/irq.c +++ b/arch/mips/loongson/common/irq.c @@ -20,21 +20,21 @@ void bonito_irqdispatch(void) int i; /* workaround the IO dma problem: let cpu looping to allow DMA finish */ - int_status = BONITO_INTISR; + int_status = LOONGSON_INTISR; if (int_status & (1 << 10)) { while (int_status & (1 << 10)) { udelay(1); - int_status = BONITO_INTISR; + int_status = LOONGSON_INTISR; } } /* Get pending sources, masked by current enables */ - int_status = BONITO_INTISR & BONITO_INTEN; + int_status = LOONGSON_INTISR & LOONGSON_INTEN; if (int_status != 0) { i = __ffs(int_status); int_status &= ~(1 << i); - do_IRQ(BONITO_IRQ_BASE + i); + do_IRQ(LOONGSON_IRQ_BASE + i); } } @@ -60,13 +60,13 @@ void __init arch_init_irq(void) set_irq_trigger_mode(); /* no steer */ - BONITO_INTSTEER = 0; + LOONGSON_INTSTEER = 0; /* * Mask out all interrupt by writing "1" to all bit position in * the interrupt reset reg. */ - BONITO_INTENCLR = ~0; + LOONGSON_INTENCLR = ~0; /* machine specific irq init */ mach_init_irq(); diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index 7b348248de7..0ed52b3f531 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -15,6 +15,9 @@ #include <loongson.h> #include <machine.h> +/* please ensure the length of the machtype string is less than 50 */ +#define MACHTYPE_LEN 50 + static const char *system_types[] = { [MACH_LOONGSON_UNKNOWN] "unknown loongson machine", [MACH_LEMOTE_FL2E] "lemote-fuloong-2e-box", @@ -22,29 +25,35 @@ static const char *system_types[] = { [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches", + [MACH_LEMOTE_NAS] "lemote-nas-2f", + [MACH_LEMOTE_LL2F] "lemote-lynloong-2f", [MACH_LOONGSON_END] NULL, }; const char *get_system_type(void) { - if (mips_machtype == MACH_UNKNOWN) - mips_machtype = LOONGSON_MACHTYPE; - return system_types[mips_machtype]; } -static __init int machtype_setup(char *str) +void __init prom_init_machtype(void) { + char *p, str[MACHTYPE_LEN]; int machtype = MACH_LEMOTE_FL2E; - if (!str) - return -EINVAL; + mips_machtype = LOONGSON_MACHTYPE; + + p = strstr(arcs_cmdline, "machtype="); + if (!p) + return; + p += strlen("machtype="); + strncpy(str, p, MACHTYPE_LEN); + p = strstr(str, " "); + if (p) + *p = '\0'; for (; system_types[machtype]; machtype++) if (strstr(system_types[machtype], str)) { mips_machtype = machtype; break; } - return 0; } -__setup("machtype=", machtype_setup); diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index e94ef158f98..ceacd092b44 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -12,15 +12,40 @@ #include <loongson.h> #include <mem.h> +#include <pci.h> void __init prom_init_memory(void) { add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); + + add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << + 20), BOOT_MEM_RESERVED); +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + { + int bit; + + bit = fls(memsize + highmemsize); + if (bit != ffs(memsize + highmemsize)) + bit += 20; + else + bit = bit + 20 - 1; + + /* set cpu window3 to map CPU to DDR: 2G -> 2G */ + LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, + 0x80000000ul, (1 << bit)); + mmiowb(); + } +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ + #ifdef CONFIG_64BIT - if (highmemsize > 0) - add_memory_region(LOONGSON_HIGHMEM_START, - highmemsize << 20, BOOT_MEM_RAM); -#endif /* CONFIG_64BIT */ + if (highmemsize > 0) + add_memory_region(LOONGSON_HIGHMEM_START, + highmemsize << 20, BOOT_MEM_RAM); + + add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - + LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); + +#endif /* !CONFIG_64BIT */ } /* override of arch/mips/mm/cache.c: __uncached_access */ @@ -33,3 +58,61 @@ int __uncached_access(struct file *file, unsigned long addr) ((addr >= LOONGSON_MMIO_MEM_START) && (addr < LOONGSON_MMIO_MEM_END)); } + +#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED + +#include <linux/pci.h> +#include <linux/sched.h> +#include <asm/current.h> + +static unsigned long uca_start, uca_end; + +pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot) +{ + unsigned long offset = pfn << PAGE_SHIFT; + unsigned long end = offset + size; + + if (__uncached_access(file, offset)) { + if (((uca_start && offset) >= uca_start) && + (end <= uca_end)) + return __pgprot((pgprot_val(vma_prot) & + ~_CACHE_MASK) | + _CACHE_UNCACHED_ACCELERATED); + else + return pgprot_noncached(vma_prot); + } + return vma_prot; +} + +static int __init find_vga_mem_init(void) +{ + struct pci_dev *dev = 0; + struct resource *r; + int idx; + + if (uca_start) + return 0; + + for_each_pci_dev(dev) { + if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) { + for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { + r = &dev->resource[idx]; + if (!r->start && r->end) + continue; + if (r->flags & IORESOURCE_IO) + continue; + if (r->flags & IORESOURCE_MEM) { + uca_start = r->start; + uca_end = r->end; + return 0; + } + } + } + } + + return 0; +} + +late_initcall(find_vga_mem_init); +#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */ diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c index a3a4abfb6c9..31d8c5ecd16 100644 --- a/arch/mips/loongson/common/pci.c +++ b/arch/mips/loongson/common/pci.c @@ -27,7 +27,7 @@ static struct resource loongson_pci_io_resource = { }; static struct pci_controller loongson_pci_controller = { - .pci_ops = &bonito64_pci_ops, + .pci_ops = &loongson_pci_ops, .io_resource = &loongson_pci_io_resource, .mem_resource = &loongson_pci_mem_resource, .mem_offset = 0x00000000UL, @@ -44,15 +44,15 @@ static void __init setup_pcimap(void) * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 * [<2G] [384M,448M] [320M,384M] [0M,64M] */ - BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 | - BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) | - BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) | - BONITO_PCIMAP_WIN(0, 0); + LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 | + LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) | + LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) | + LOONGSON_PCIMAP_WIN(0, 0); /* * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M] */ - BONITO_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ + LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ /* size: 256M, burst transmission, pre-fetch enable, 64bit */ LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul; LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful; @@ -67,6 +67,14 @@ static void __init setup_pcimap(void) /* can not change gnt to break pci transfer when device's gnt not deassert for some broken device */ LOONGSON_PXARB_CFG = 0x00fe0105ul; + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + /* + * set cpu addr window2 to map CPU address space to PCI address space + */ + LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC, + LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE); +#endif } static int __init pcibios_init(void) diff --git a/arch/mips/loongson/common/platform.c b/arch/mips/loongson/common/platform.c new file mode 100644 index 00000000000..be81777eb94 --- /dev/null +++ b/arch/mips/loongson/common/platform.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/err.h> +#include <linux/platform_device.h> + +static struct platform_device loongson2_cpufreq_device = { + .name = "loongson2_cpufreq", + .id = -1, +}; + +static int __init loongson2_cpufreq_init(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + /* Only 2F revision and it's successors support CPUFreq */ + if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F) + return platform_device_register(&loongson2_cpufreq_device); + + return -ENODEV; +} + +arch_initcall(loongson2_cpufreq_init); diff --git a/arch/mips/loongson/common/pm.c b/arch/mips/loongson/common/pm.c new file mode 100644 index 00000000000..b625fec8a4d --- /dev/null +++ b/arch/mips/loongson/common/pm.c @@ -0,0 +1,161 @@ +/* + * loongson-specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/pm.h> + +#include <asm/i8259.h> +#include <asm/mipsregs.h> + +#include <loongson.h> + +static unsigned int __maybe_unused cached_master_mask; /* i8259A */ +static unsigned int __maybe_unused cached_slave_mask; +static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */ + +void arch_suspend_disable_irqs(void) +{ + /* disable all mips events */ + local_irq_disable(); + +#ifdef CONFIG_I8259 + /* disable all events of i8259A */ + cached_slave_mask = inb(PIC_SLAVE_IMR); + cached_master_mask = inb(PIC_MASTER_IMR); + + outb(0xff, PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + outb(0xff, PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); +#endif + /* disable all events of bonito */ + cached_bonito_irq_mask = LOONGSON_INTEN; + LOONGSON_INTENCLR = 0xffff; + (void)LOONGSON_INTENCLR; +} + +void arch_suspend_enable_irqs(void) +{ + /* enable all mips events */ + local_irq_enable(); +#ifdef CONFIG_I8259 + /* only enable the cached events of i8259A */ + outb(cached_slave_mask, PIC_SLAVE_IMR); + outb(cached_master_mask, PIC_MASTER_IMR); +#endif + /* enable all cached events of bonito */ + LOONGSON_INTENSET = cached_bonito_irq_mask; + (void)LOONGSON_INTENSET; +} + +/* + * Setup the board-specific events for waking up loongson from wait mode + */ +void __weak setup_wakeup_events(void) +{ +} + +/* + * Check wakeup events + */ +int __weak wakeup_loongson(void) +{ + return 1; +} + +/* + * If the events are really what we want to wakeup the CPU, wake it up + * otherwise put the CPU asleep again. + */ +static void wait_for_wakeup_events(void) +{ + while (!wakeup_loongson()) + LOONGSON_CHIPCFG0 &= ~0x7; +} + +/* + * Stop all perf counters + * + * $24 is the control register of Loongson perf counter + */ +static inline void stop_perf_counters(void) +{ + __write_64bit_c0_register($24, 0, 0); +} + + +static void loongson_suspend_enter(void) +{ + static unsigned int cached_cpu_freq; + + /* setup wakeup events via enabling the IRQs */ + setup_wakeup_events(); + + stop_perf_counters(); + + cached_cpu_freq = LOONGSON_CHIPCFG0; + + /* Put CPU into wait mode */ + LOONGSON_CHIPCFG0 &= ~0x7; + + /* wait for the given events to wakeup cpu from wait mode */ + wait_for_wakeup_events(); + + LOONGSON_CHIPCFG0 = cached_cpu_freq; + mmiowb(); +} + +void __weak mach_suspend(void) +{ +} + +void __weak mach_resume(void) +{ +} + +static int loongson_pm_enter(suspend_state_t state) +{ + mach_suspend(); + + /* processor specific suspend */ + loongson_suspend_enter(); + + mach_resume(); + + return 0; +} + +static int loongson_pm_valid_state(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_ON: + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + return 1; + + default: + return 0; + } +} + +static struct platform_suspend_ops loongson_pm_ops = { + .valid = loongson_pm_valid_state, + .enter = loongson_pm_enter, +}; + +static int __init loongson_pm_init(void) +{ + suspend_set_ops(&loongson_pm_ops); + + return 0; +} +arch_initcall(loongson_pm_init); diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c index 97e918251ed..d57f1719da9 100644 --- a/arch/mips/loongson/common/reset.c +++ b/arch/mips/loongson/common/reset.c @@ -22,7 +22,7 @@ static void loongson_restart(char *command) mach_prepare_reboot(); /* reboot via jumping to boot base address */ - ((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) (); + ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); } static void loongson_halt(void) diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c new file mode 100644 index 00000000000..23b66a5f88c --- /dev/null +++ b/arch/mips/loongson/common/serial.c @@ -0,0 +1,76 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Yan hua (yanhua@lemote.com) + * Author: Wu Zhangjin (wuzj@lemote.com) + */ + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/serial_8250.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <machine.h> + +#define PORT(int) \ +{ \ + .irq = int, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +#define PORT_M(int) \ +{ \ + .irq = MIPS_CPU_IRQ_BASE + (int), \ + .uartclk = 3686400, \ + .iotype = UPIO_MEM, \ + .membase = (void __iomem *)NULL, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +static struct plat_serial8250_port uart8250_data[][2] = { + [MACH_LOONGSON_UNKNOWN] {}, + [MACH_LEMOTE_FL2E] {PORT(4), {} }, + [MACH_LEMOTE_FL2F] {PORT(3), {} }, + [MACH_LEMOTE_ML2F7] {PORT_M(3), {} }, + [MACH_LEMOTE_YL2F89] {PORT_M(3), {} }, + [MACH_DEXXON_GDIUM2F10] {PORT_M(3), {} }, + [MACH_LEMOTE_NAS] {PORT_M(3), {} }, + [MACH_LEMOTE_LL2F] {PORT(3), {} }, + [MACH_LOONGSON_END] {}, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, +}; + +static int __init serial_init(void) +{ + unsigned char iotype; + + iotype = uart8250_data[mips_machtype][0].iotype; + + if (UPIO_MEM == iotype) + uart8250_data[mips_machtype][0].membase = + (void __iomem *)_loongson_uart_base; + else if (UPIO_PORT == iotype) + uart8250_data[mips_machtype][0].iobase = + loongson_uart_base - LOONGSON_PCIIO_BASE; + + uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; + + return platform_device_register(&uart8250_device); +} + +device_initcall(serial_init); diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c index 6e08c8270ab..35f0b66a94f 100644 --- a/arch/mips/loongson/common/time.c +++ b/arch/mips/loongson/common/time.c @@ -14,11 +14,14 @@ #include <asm/time.h> #include <loongson.h> +#include <cs5536/cs5536_mfgpt.h> void __init plat_time_init(void) { /* setup mips r4k timer */ mips_hpt_frequency = cpu_clock_freq / 2; + + setup_mfgpt0_timer(); } void read_persistent_clock(struct timespec *ts) diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c new file mode 100644 index 00000000000..78ff66ae749 --- /dev/null +++ b/arch/mips/loongson/common/uart_base.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <asm/bootinfo.h> + +#include <loongson.h> + +/* ioremapped */ +unsigned long _loongson_uart_base; +EXPORT_SYMBOL(_loongson_uart_base); +/* raw */ +unsigned long loongson_uart_base; +EXPORT_SYMBOL(loongson_uart_base); + +void prom_init_loongson_uart_base(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2E: + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x3f8; + break; + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_LL2F: + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x2f8; + break; + case MACH_LEMOTE_ML2F7: + case MACH_LEMOTE_YL2F89: + case MACH_DEXXON_GDIUM2F10: + case MACH_LEMOTE_NAS: + default: + /* The CPU provided serial port */ + loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8; + break; + } + + _loongson_uart_base = + (unsigned long)ioremap_nocache(loongson_uart_base, 8); +} diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c index 7888cf69424..320e9379bdd 100644 --- a/arch/mips/loongson/fuloong-2e/irq.c +++ b/arch/mips/loongson/fuloong-2e/irq.c @@ -47,8 +47,8 @@ static struct irqaction cascade_irqaction = { void __init set_irq_trigger_mode(void) { /* most bonito irq should be level triggered */ - BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR | - BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES; + LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR | + LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES; } void __init mach_init_irq(void) diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c index 677fe186db9..fc16c677d47 100644 --- a/arch/mips/loongson/fuloong-2e/reset.c +++ b/arch/mips/loongson/fuloong-2e/reset.c @@ -14,8 +14,8 @@ void mach_prepare_reboot(void) { - BONITO_BONGENCFG &= ~(1 << 2); - BONITO_BONGENCFG |= (1 << 2); + LOONGSON_GENCFG &= ~(1 << 2); + LOONGSON_GENCFG |= (1 << 2); } void mach_prepare_shutdown(void) diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile new file mode 100644 index 00000000000..4d84b27dc41 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for lemote loongson2f family machines +# + +obj-y += irq.o reset.o ec_kb3310b.o + +# +# Suspend Support +# + +obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.c b/arch/mips/loongson/lemote-2f/ec_kb3310b.c new file mode 100644 index 00000000000..4d84111a2cd --- /dev/null +++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.c @@ -0,0 +1,130 @@ +/* + * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl <liujl@lemote.com>, 2008-04-20 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/delay.h> + +#include "ec_kb3310b.h" + +static DEFINE_SPINLOCK(index_access_lock); +static DEFINE_SPINLOCK(port_access_lock); + +unsigned char ec_read(unsigned short addr) +{ + unsigned char value; + unsigned long flags; + + spin_lock_irqsave(&index_access_lock, flags); + outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); + outb((addr & 0x00ff), EC_IO_PORT_LOW); + value = inb(EC_IO_PORT_DATA); + spin_unlock_irqrestore(&index_access_lock, flags); + + return value; +} +EXPORT_SYMBOL_GPL(ec_read); + +void ec_write(unsigned short addr, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&index_access_lock, flags); + outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); + outb((addr & 0x00ff), EC_IO_PORT_LOW); + outb(val, EC_IO_PORT_DATA); + /* flush the write action */ + inb(EC_IO_PORT_DATA); + spin_unlock_irqrestore(&index_access_lock, flags); + + return; +} +EXPORT_SYMBOL_GPL(ec_write); + +/* + * This function is used for EC command writes and corresponding status queries. + */ +int ec_query_seq(unsigned char cmd) +{ + int timeout; + unsigned char status; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&port_access_lock, flags); + + /* make chip goto reset mode */ + udelay(EC_REG_DELAY); + outb(cmd, EC_CMD_PORT); + udelay(EC_REG_DELAY); + + /* check if the command is received by ec */ + timeout = EC_CMD_TIMEOUT; + status = inb(EC_STS_PORT); + while (timeout-- && (status & (1 << 1))) { + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + } + + if (timeout <= 0) { + printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); + ret = -EINVAL; + } else + printk(KERN_INFO + "(%x/%d)ec issued command %d status : 0x%x\n", + timeout, EC_CMD_TIMEOUT - timeout, cmd, status); + + spin_unlock_irqrestore(&port_access_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(ec_query_seq); + +/* + * Send query command to EC to get the proper event number + */ +int ec_query_event_num(void) +{ + return ec_query_seq(CMD_GET_EVENT_NUM); +} +EXPORT_SYMBOL(ec_query_event_num); + +/* + * Get event number from EC + * + * NOTE: This routine must follow the query_event_num function in the + * interrupt. + */ +int ec_get_event_num(void) +{ + int timeout = 100; + unsigned char value; + unsigned char status; + + udelay(EC_REG_DELAY); + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + while (timeout-- && !(status & (1 << 0))) { + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + } + if (timeout <= 0) { + pr_info("%s: get event number timeout.\n", __func__); + + return -EINVAL; + } + value = inb(EC_DAT_PORT); + udelay(EC_REG_DELAY); + + return value; +} +EXPORT_SYMBOL(ec_get_event_num); diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h new file mode 100644 index 00000000000..1595a21b315 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h @@ -0,0 +1,188 @@ +/* + * KB3310B Embedded Controller + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl <liujl@lemote.com>, 2008-03-14 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _EC_KB3310B_H +#define _EC_KB3310B_H + +extern unsigned char ec_read(unsigned short addr); +extern void ec_write(unsigned short addr, unsigned char val); +extern int ec_query_seq(unsigned char cmd); +extern int ec_query_event_num(void); +extern int ec_get_event_num(void); + +typedef int (*sci_handler) (int status); +extern sci_handler yeeloong_report_lid_status; + +#define SCI_IRQ_NUM 0x0A + +/* + * The following registers are determined by the EC index configuration. + * 1, fill the PORT_HIGH as EC register high part. + * 2, fill the PORT_LOW as EC register low part. + * 3, fill the PORT_DATA as EC register write data or get the data from it. + */ +#define EC_IO_PORT_HIGH 0x0381 +#define EC_IO_PORT_LOW 0x0382 +#define EC_IO_PORT_DATA 0x0383 + +/* + * EC delay time is 500us for register and status access + */ +#define EC_REG_DELAY 500 /* unit : us */ +#define EC_CMD_TIMEOUT 0x1000 + +/* + * EC access port for SCI communication + */ +#define EC_CMD_PORT 0x66 +#define EC_STS_PORT 0x66 +#define EC_DAT_PORT 0x62 +#define CMD_INIT_IDLE_MODE 0xdd +#define CMD_EXIT_IDLE_MODE 0xdf +#define CMD_INIT_RESET_MODE 0xd8 +#define CMD_REBOOT_SYSTEM 0x8c +#define CMD_GET_EVENT_NUM 0x84 +#define CMD_PROGRAM_PIECE 0xda + +/* temperature & fan registers */ +#define REG_TEMPERATURE_VALUE 0xF458 +#define REG_FAN_AUTO_MAN_SWITCH 0xF459 +#define BIT_FAN_AUTO 0 +#define BIT_FAN_MANUAL 1 +#define REG_FAN_CONTROL 0xF4D2 +#define BIT_FAN_CONTROL_ON (1 << 0) +#define BIT_FAN_CONTROL_OFF (0 << 0) +#define REG_FAN_STATUS 0xF4DA +#define BIT_FAN_STATUS_ON (1 << 0) +#define BIT_FAN_STATUS_OFF (0 << 0) +#define REG_FAN_SPEED_HIGH 0xFE22 +#define REG_FAN_SPEED_LOW 0xFE23 +#define REG_FAN_SPEED_LEVEL 0xF4CC +/* fan speed divider */ +#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ + +/* battery registers */ +#define REG_BAT_DESIGN_CAP_HIGH 0xF77D +#define REG_BAT_DESIGN_CAP_LOW 0xF77E +#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 +#define REG_BAT_FULLCHG_CAP_LOW 0xF781 +#define REG_BAT_DESIGN_VOL_HIGH 0xF782 +#define REG_BAT_DESIGN_VOL_LOW 0xF783 +#define REG_BAT_CURRENT_HIGH 0xF784 +#define REG_BAT_CURRENT_LOW 0xF785 +#define REG_BAT_VOLTAGE_HIGH 0xF786 +#define REG_BAT_VOLTAGE_LOW 0xF787 +#define REG_BAT_TEMPERATURE_HIGH 0xF788 +#define REG_BAT_TEMPERATURE_LOW 0xF789 +#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 +#define REG_BAT_RELATIVE_CAP_LOW 0xF493 +#define REG_BAT_VENDOR 0xF4C4 +#define FLAG_BAT_VENDOR_SANYO 0x01 +#define FLAG_BAT_VENDOR_SIMPLO 0x02 +#define REG_BAT_CELL_COUNT 0xF4C6 +#define FLAG_BAT_CELL_3S1P 0x03 +#define FLAG_BAT_CELL_3S2P 0x06 +#define REG_BAT_CHARGE 0xF4A2 +#define FLAG_BAT_CHARGE_DISCHARGE 0x01 +#define FLAG_BAT_CHARGE_CHARGE 0x02 +#define FLAG_BAT_CHARGE_ACPOWER 0x00 +#define REG_BAT_STATUS 0xF4B0 +#define BIT_BAT_STATUS_LOW (1 << 5) +#define BIT_BAT_STATUS_DESTROY (1 << 2) +#define BIT_BAT_STATUS_FULL (1 << 1) +#define BIT_BAT_STATUS_IN (1 << 0) +#define REG_BAT_CHARGE_STATUS 0xF4B1 +#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) +#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) +#define REG_BAT_STATE 0xF482 +#define BIT_BAT_STATE_CHARGING (1 << 1) +#define BIT_BAT_STATE_DISCHARGING (1 << 0) +#define REG_BAT_POWER 0xF440 +#define BIT_BAT_POWER_S3 (1 << 2) +#define BIT_BAT_POWER_ON (1 << 1) +#define BIT_BAT_POWER_ACIN (1 << 0) + +/* other registers */ +/* Audio: rd/wr */ +#define REG_AUDIO_VOLUME 0xF46C +#define REG_AUDIO_MUTE 0xF4E7 +#define REG_AUDIO_BEEP 0xF4D0 +/* USB port power or not: rd/wr */ +#define REG_USB0_FLAG 0xF461 +#define REG_USB1_FLAG 0xF462 +#define REG_USB2_FLAG 0xF463 +#define BIT_USB_FLAG_ON 1 +#define BIT_USB_FLAG_OFF 0 +/* LID */ +#define REG_LID_DETECT 0xF4BD +#define BIT_LID_DETECT_ON 1 +#define BIT_LID_DETECT_OFF 0 +/* CRT */ +#define REG_CRT_DETECT 0xF4AD +#define BIT_CRT_DETECT_PLUG 1 +#define BIT_CRT_DETECT_UNPLUG 0 +/* LCD backlight brightness adjust: 9 levels */ +#define REG_DISPLAY_BRIGHTNESS 0xF4F5 +/* Black screen Status */ +#define BIT_DISPLAY_LCD_ON 1 +#define BIT_DISPLAY_LCD_OFF 0 +/* LCD backlight control: off/restore */ +#define REG_BACKLIGHT_CTRL 0xF7BD +#define BIT_BACKLIGHT_ON 1 +#define BIT_BACKLIGHT_OFF 0 +/* Reset the machine auto-clear: rd/wr */ +#define REG_RESET 0xF4EC +#define BIT_RESET_ON 1 +/* Light the led: rd/wr */ +#define REG_LED 0xF4C8 +#define BIT_LED_RED_POWER (1 << 0) +#define BIT_LED_ORANGE_POWER (1 << 1) +#define BIT_LED_GREEN_CHARGE (1 << 2) +#define BIT_LED_RED_CHARGE (1 << 3) +#define BIT_LED_NUMLOCK (1 << 4) +/* Test led mode, all led on/off */ +#define REG_LED_TEST 0xF4C2 +#define BIT_LED_TEST_IN 1 +#define BIT_LED_TEST_OUT 0 +/* Camera on/off */ +#define REG_CAMERA_STATUS 0xF46A +#define BIT_CAMERA_STATUS_ON 1 +#define BIT_CAMERA_STATUS_OFF 0 +#define REG_CAMERA_CONTROL 0xF7B7 +#define BIT_CAMERA_CONTROL_OFF 0 +#define BIT_CAMERA_CONTROL_ON 1 +/* Wlan Status */ +#define REG_WLAN 0xF4FA +#define BIT_WLAN_ON 1 +#define BIT_WLAN_OFF 0 +#define REG_DISPLAY_LCD 0xF79F + +/* SCI Event Number from EC */ +enum { + EVENT_LID = 0x23, /* LID open/close */ + EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ + EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ + EVENT_OVERTEMP, /* Over-temperature happened */ + EVENT_CRT_DETECT, /* CRT is connected */ + EVENT_CAMERA, /* Camera on/off */ + EVENT_USB_OC2, /* USB2 Over Current occurred */ + EVENT_USB_OC0, /* USB0 Over Current occurred */ + EVENT_BLACK_SCREEN, /* Turn on/off backlight */ + EVENT_AUDIO_MUTE, /* Mute on/off */ + EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ + EVENT_AC_BAT, /* AC & Battery relative issue */ + EVENT_AUDIO_VOLUME, /* Volume adjust */ + EVENT_WLAN, /* Wlan on/off */ + EVENT_END +}; + +#endif /* !_EC_KB3310B_H */ diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c new file mode 100644 index 00000000000..77d32f9cf31 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2007 Lemote Inc. + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> + +#include <asm/irq_cpu.h> +#include <asm/i8259.h> +#include <asm/mipsregs.h> + +#include <loongson.h> +#include <machine.h> + +#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */ +#define LOONGSON_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ +#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */ +#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */ +#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */ + +#define LOONGSON_INT_BIT_INT0 (1 << 11) +#define LOONGSON_INT_BIT_INT1 (1 << 12) + +/* + * The generic i8259_irq() make the kernel hang on booting. Since we cannot + * get the irq via the IRR directly, we access the ISR instead. + */ +int mach_i8259_irq(void) +{ + int irq, isr; + + irq = -1; + + if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) { + spin_lock(&i8259A_lock); + isr = inb(PIC_MASTER_CMD) & + ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR); + if (!isr) + isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8; + irq = ffs(isr) - 1; + if (unlikely(irq == 7)) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + outb(0x0B, PIC_MASTER_ISR); /* ISR register */ + if (~inb(PIC_MASTER_ISR) & 0x80) + irq = -1; + } + spin_unlock(&i8259A_lock); + } + + return irq; +} +EXPORT_SYMBOL(mach_i8259_irq); + +static void i8259_irqdispatch(void) +{ + int irq; + + irq = mach_i8259_irq(); + if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); +} + +void mach_irq_dispatch(unsigned int pending) +{ + if (pending & CAUSEF_IP7) + do_IRQ(LOONGSON_TIMER_IRQ); + else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ +#ifdef CONFIG_OPROFILE + do_IRQ(LOONGSON2_PERFCNT_IRQ); +#endif + bonito_irqdispatch(); + } else if (pending & CAUSEF_IP3) /* CPU UART */ + do_IRQ(LOONGSON_UART_IRQ); + else if (pending & CAUSEF_IP2) /* South Bridge */ + i8259_irqdispatch(); + else + spurious_interrupt(); +} + +void __init set_irq_trigger_mode(void) +{ + /* setup cs5536 as high level trigger */ + LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1; + LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1); +} + +static irqreturn_t ip6_action(int cpl, void *dev_id) +{ + return IRQ_HANDLED; +} + +struct irqaction ip6_irqaction = { + .handler = ip6_action, + .name = "cascade", + .flags = IRQF_SHARED, +}; + +struct irqaction cascade_irqaction = { + .handler = no_action, + .name = "cascade", +}; + +void __init mach_init_irq(void) +{ + /* init all controller + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq + */ + + /* Sets the first-level interrupt dispatcher. */ + mips_cpu_irq_init(); + init_i8259_irqs(); + bonito_irq_init(); + + /* setup north bridge irq (bonito) */ + setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction); + /* setup source bridge irq (i8259) */ + setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction); +} diff --git a/arch/mips/loongson/lemote-2f/pm.c b/arch/mips/loongson/lemote-2f/pm.c new file mode 100644 index 00000000000..d7af2e61659 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/pm.c @@ -0,0 +1,149 @@ +/* + * Lemote loongson2f family machines' specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <linux/i8042.h> +#include <linux/module.h> + +#include <asm/i8259.h> +#include <asm/mipsregs.h> +#include <asm/bootinfo.h> + +#include <loongson.h> + +#include <cs5536/cs5536_mfgpt.h> +#include "ec_kb3310b.h" + +#define I8042_KBD_IRQ 1 +#define I8042_CTR_KBDINT 0x01 +#define I8042_CTR_KBDDIS 0x10 + +static unsigned char i8042_ctr; + +static int i8042_enable_kbd_port(void) +{ + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { + pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port." + "\n"); + return -EIO; + } + + i8042_ctr &= ~I8042_CTR_KBDDIS; + i8042_ctr |= I8042_CTR_KBDINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + i8042_ctr &= ~I8042_CTR_KBDINT; + i8042_ctr |= I8042_CTR_KBDDIS; + pr_err("i8042.c: Failed to enable KBD port.\n"); + + return -EIO; + } + + return 0; +} + +void setup_wakeup_events(void) +{ + int irq_mask; + + switch (mips_machtype) { + case MACH_LEMOTE_ML2F7: + case MACH_LEMOTE_YL2F89: + /* open the keyboard irq in i8259A */ + outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR); + irq_mask = inb(PIC_MASTER_IMR); + + /* enable keyboard port */ + i8042_enable_kbd_port(); + + /* Wakeup CPU via SCI lid open event */ + outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); + outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + + break; + + default: + break; + } +} + +static struct delayed_work lid_task; +static int initialized; +/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */ +sci_handler yeeloong_report_lid_status; +EXPORT_SYMBOL(yeeloong_report_lid_status); +static void yeeloong_lid_update_task(struct work_struct *work) +{ + if (yeeloong_report_lid_status) + yeeloong_report_lid_status(BIT_LID_DETECT_ON); +} + +int wakeup_loongson(void) +{ + int irq; + + /* query the interrupt number */ + irq = mach_i8259_irq(); + if (irq < 0) + return 0; + + printk(KERN_INFO "%s: irq = %d\n", __func__, irq); + + if (irq == I8042_KBD_IRQ) + return 1; + else if (irq == SCI_IRQ_NUM) { + int ret, sci_event; + /* query the event number */ + ret = ec_query_seq(CMD_GET_EVENT_NUM); + if (ret < 0) + return 0; + sci_event = ec_get_event_num(); + if (sci_event < 0) + return 0; + if (sci_event == EVENT_LID) { + int lid_status; + /* check the LID status */ + lid_status = ec_read(REG_LID_DETECT); + /* wakeup cpu when people open the LID */ + if (lid_status == BIT_LID_DETECT_ON) { + /* If we call it directly here, the WARNING + * will be sent out by getnstimeofday + * via "WARN_ON(timekeeping_suspended);" + * because we can not schedule in suspend mode. + */ + if (initialized == 0) { + INIT_DELAYED_WORK(&lid_task, + yeeloong_lid_update_task); + initialized = 1; + } + schedule_delayed_work(&lid_task, 1); + return 1; + } + } + } + + return 0; +} + +void __weak mach_suspend(void) +{ + disable_mfgpt0_counter(); +} + +void __weak mach_resume(void) +{ + enable_mfgpt0_counter(); +} diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c new file mode 100644 index 00000000000..51d1a60d534 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/reset.c @@ -0,0 +1,159 @@ +/* Board-specific reboot/shutdown routines + * + * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/types.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> + +#include <cs5536/cs5536.h> +#include "ec_kb3310b.h" + +static void reset_cpu(void) +{ + /* + * reset cpu to full speed, this is needed when enabling cpu frequency + * scalling + */ + LOONGSON_CHIPCFG0 |= 0x7; +} + +/* reset support for fuloong2f */ + +static void fl2f_reboot(void) +{ + reset_cpu(); + + /* send a reset signal to south bridge. + * + * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset + * normally with this reset operation and it will not work in PMON, but + * you can type halt command and then reboot, seems the hardware reset + * logic not work normally. + */ + { + u32 hi, lo; + _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo); + lo |= 0x00000001; + _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo); + } +} + +static void fl2f_shutdown(void) +{ + u32 hi, lo, val; + int gpio_base; + + /* get gpio base */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo); + gpio_base = lo & 0xff00; + + /* make cs5536 gpio13 output enable */ + val = inl(gpio_base + GPIOL_OUT_EN); + val &= ~(1 << (16 + 13)); + val |= (1 << 13); + outl(val, gpio_base + GPIOL_OUT_EN); + mmiowb(); + /* make cs5536 gpio13 output low level voltage. */ + val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13)); + val |= (1 << (16 + 13)); + outl(val, gpio_base + GPIOL_OUT_VAL); + mmiowb(); +} + +/* reset support for yeeloong2f and mengloong2f notebook */ + +void ml2f_reboot(void) +{ + reset_cpu(); + + /* sending an reset signal to EC(embedded controller) */ + ec_write(REG_RESET, BIT_RESET_ON); +} + +#define yl2f89_reboot ml2f_reboot + +/* menglong(7inches) laptop has different shutdown logic from 8.9inches */ +#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d +#define EC_SHUTDOWN_IO_PORT_LOW 0xff2e +#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f +#define REG_SHUTDOWN_HIGH 0xFC +#define REG_SHUTDOWN_LOW 0x29 +#define BIT_SHUTDOWN_ON (1 << 1) + +static void ml2f_shutdown(void) +{ + u8 val; + u64 i; + + outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH); + outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW); + mmiowb(); + val = inb(EC_SHUTDOWN_IO_PORT_DATA); + outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA); + mmiowb(); + /* need enough wait here... how many microseconds needs? */ + for (i = 0; i < 0x10000; i++) + delay(); + outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA); + mmiowb(); +} + +static void yl2f89_shutdown(void) +{ + /* cpu-gpio0 output low */ + LOONGSON_GPIODATA &= ~0x00000001; + /* cpu-gpio0 as output */ + LOONGSON_GPIOIE &= ~0x00000001; +} + +void mach_prepare_reboot(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_NAS: + case MACH_LEMOTE_LL2F: + fl2f_reboot(); + break; + case MACH_LEMOTE_ML2F7: + ml2f_reboot(); + break; + case MACH_LEMOTE_YL2F89: + yl2f89_reboot(); + break; + default: + break; + } +} + +void mach_prepare_shutdown(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_NAS: + case MACH_LEMOTE_LL2F: + fl2f_shutdown(); + break; + case MACH_LEMOTE_ML2F7: + ml2f_shutdown(); + break; + case MACH_LEMOTE_YL2F89: + yl2f89_shutdown(); + break; + default: + break; + } +} diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 454b5392449..8f2f8e9d8b2 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -35,6 +35,7 @@ * better performance by compiling with -msoft-float! */ #include <linux/sched.h> +#include <linux/module.h> #include <linux/debugfs.h> #include <asm/inst.h> @@ -68,7 +69,9 @@ static int fpux_emu(struct pt_regs *, /* Further private data for which no space exists in mips_fpu_struct */ -struct mips_fpu_emulator_stats fpuemustats; +#ifdef CONFIG_DEBUG_FS +DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats); +#endif /* Control registers */ @@ -209,7 +212,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) unsigned int cond; if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } @@ -240,7 +243,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) return SIGILL; } if (get_user(ir, (mips_instruction __user *) emulpc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } /* __compute_return_epc() will have updated cp0_epc */ @@ -253,16 +256,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) } emul: - fpuemustats.emulated++; + MIPS_FPU_EMU_INC_STATS(emulated); switch (MIPSInst_OPCODE(ir)) { case ldc1_op:{ u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] + MIPSInst_SIMM(ir)); u64 val; - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } DITOREG(val, MIPSInst_RT(ir)); @@ -274,10 +277,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPSInst_SIMM(ir)); u64 val; - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); DIFROMREG(val, MIPSInst_RT(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -288,9 +291,9 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPSInst_SIMM(ir)); u32 val; - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } SITOREG(val, MIPSInst_RT(ir)); @@ -302,10 +305,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPSInst_SIMM(ir)); u32 val; - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); SIFROMREG(val, MIPSInst_RT(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -429,7 +432,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } @@ -595,7 +598,7 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, { unsigned rcsr = 0; /* resulting csr */ - fpuemustats.cp1xops++; + MIPS_FPU_EMU_INC_STATS(cp1xops); switch (MIPSInst_FMA_FFMT(ir)) { case s_fmt:{ /* 0 */ @@ -610,9 +613,9 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } SITOREG(val, MIPSInst_FD(ir)); @@ -622,11 +625,11 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); SIFROMREG(val, MIPSInst_FS(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -687,9 +690,9 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } DITOREG(val, MIPSInst_FD(ir)); @@ -699,10 +702,10 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); DIFROMREG(val, MIPSInst_FS(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -769,7 +772,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, #endif } rv; /* resulting value */ - fpuemustats.cp1ops++; + MIPS_FPU_EMU_INC_STATS(cp1ops); switch (rfmt = (MIPSInst_FFMT(ir) & 0xf)) { case s_fmt:{ /* 0 */ union { @@ -1240,7 +1243,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, prevepc = xcp->cp0_epc; if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } if (insn == 0) @@ -1276,33 +1279,50 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, } #ifdef CONFIG_DEBUG_FS + +static int fpuemu_stat_get(void *data, u64 *val) +{ + int cpu; + unsigned long sum = 0; + for_each_online_cpu(cpu) { + struct mips_fpu_emulator_stats *ps; + local_t *pv; + ps = &per_cpu(fpuemustats, cpu); + pv = (void *)ps + (unsigned long)data; + sum += local_read(pv); + } + *val = sum; + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_fpuemu_stat, fpuemu_stat_get, NULL, "%llu\n"); + extern struct dentry *mips_debugfs_dir; static int __init debugfs_fpuemu(void) { struct dentry *d, *dir; - int i; - static struct { - const char *name; - unsigned int *v; - } vars[] __initdata = { - { "emulated", &fpuemustats.emulated }, - { "loads", &fpuemustats.loads }, - { "stores", &fpuemustats.stores }, - { "cp1ops", &fpuemustats.cp1ops }, - { "cp1xops", &fpuemustats.cp1xops }, - { "errors", &fpuemustats.errors }, - }; if (!mips_debugfs_dir) return -ENODEV; dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir); if (!dir) return -ENOMEM; - for (i = 0; i < ARRAY_SIZE(vars); i++) { - d = debugfs_create_u32(vars[i].name, S_IRUGO, dir, vars[i].v); - if (!d) - return -ENOMEM; - } + +#define FPU_STAT_CREATE(M) \ + do { \ + d = debugfs_create_file(#M , S_IRUGO, dir, \ + (void *)offsetof(struct mips_fpu_emulator_stats, M), \ + &fops_fpuemu_stat); \ + if (!d) \ + return -ENOMEM; \ + } while (0) + + FPU_STAT_CREATE(emulated); + FPU_STAT_CREATE(loads); + FPU_STAT_CREATE(stores); + FPU_STAT_CREATE(cp1ops); + FPU_STAT_CREATE(cp1xops); + FPU_STAT_CREATE(errors); + return 0; } __initcall(debugfs_fpuemu); diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c index df7b9d928ef..36d975ae08f 100644 --- a/arch/mips/math-emu/dsemul.c +++ b/arch/mips/math-emu/dsemul.c @@ -98,7 +98,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc) err |= __put_user(cpc, &fr->epc); if (unlikely(err)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } @@ -136,7 +136,7 @@ int do_dsemulret(struct pt_regs *xcp) err |= __get_user(cookie, &fr->cookie); if (unlikely(err || (insn != BREAK_MATH) || (cookie != BD_COOKIE))) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return 0; } diff --git a/arch/mips/mipssim/Makefile b/arch/mips/mipssim/Makefile index 57f43c1c788..41b96571315 100644 --- a/arch/mips/mipssim/Makefile +++ b/arch/mips/mipssim/Makefile @@ -17,8 +17,7 @@ # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # -obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \ - sim_cmdline.o +obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o obj-$(CONFIG_EARLY_PRINTK) += sim_console.o obj-$(CONFIG_MIPS_MT_SMTC) += sim_smtc.o diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c index 2877675c5f0..0824f6af477 100644 --- a/arch/mips/mipssim/sim_setup.c +++ b/arch/mips/mipssim/sim_setup.c @@ -61,7 +61,6 @@ void __init prom_init(void) set_io_port_base(0xbfd00000); pr_info("\nLINUX started...\n"); - prom_init_cmdline(); prom_meminit(); #ifdef CONFIG_MIPS_MT_SMP diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c index 1bd1f18ac23..3571090ba17 100644 --- a/arch/mips/mm/cerr-sb1.c +++ b/arch/mips/mm/cerr-sb1.c @@ -567,13 +567,10 @@ static uint32_t extract_dc(unsigned short addr, int data) datalo = ((unsigned long long)datalohi << 32) | datalolo; ecc = dc_ecc(datalo); if (ecc != datahi) { - int bits = 0; + int bits; bad_ecc |= 1 << (3-offset); ecc ^= datahi; - while (ecc) { - if (ecc & 1) bits++; - ecc >>= 1; - } + bits = hweight8(ecc); res |= (bits == 1) ? CP0_CERRD_DATA_SBE : CP0_CERRD_DATA_DBE; } printk(" %02X-%016llX", datahi, datalo); diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 8d1f4f36304..9e8d00389ee 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -462,7 +462,9 @@ void __init_refok free_initmem(void) __pa_symbol(&__init_end)); } +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT unsigned long pgd_current[NR_CPUS]; +#endif /* * On 64-bit we've got three-level pagetables with a slightly * different layout ... diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index bb1719a55d2..3d0baa4a842 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -160,6 +160,12 @@ static u32 tlb_handler[128] __cpuinitdata; static struct uasm_label labels[128] __cpuinitdata; static struct uasm_reloc relocs[128] __cpuinitdata; +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT +/* + * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current, + * we cannot do r3000 under these circumstances. + */ + /* * The R3000 TLB handler is simple. */ @@ -199,6 +205,7 @@ static void __cpuinit build_r3000_tlb_refill_handler(void) dump_handler((u32 *)ebase, 32); } +#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */ /* * The R4000 TLB handler is much more complicated. We have two @@ -497,8 +504,9 @@ static void __cpuinit build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, unsigned int tmp, unsigned int ptr) { +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT long pgdc = (long)pgd_current; - +#endif /* * The vmalloc handling is not in the hotpath. */ @@ -506,7 +514,15 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, uasm_il_bltz(p, r, tmp, label_vmalloc); /* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */ -#ifdef CONFIG_SMP +#ifdef CONFIG_MIPS_PGD_C0_CONTEXT + /* + * &pgd << 11 stored in CONTEXT [23..63]. + */ + UASM_i_MFC0(p, ptr, C0_CONTEXT); + uasm_i_dins(p, ptr, 0, 0, 23); /* Clear lower 23 bits of context. */ + uasm_i_ori(p, ptr, ptr, 0x540); /* 1 0 1 0 1 << 6 xkphys cached */ + uasm_i_drotr(p, ptr, ptr, 11); +#elif defined(CONFIG_SMP) # ifdef CONFIG_MIPS_MT_SMTC /* * SMTC uses TCBind value as "CPU" index @@ -520,7 +536,7 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, */ uasm_i_dmfc0(p, ptr, C0_CONTEXT); uasm_i_dsrl(p, ptr, ptr, 23); -#endif +# endif UASM_i_LA_mostly(p, tmp, pgdc); uasm_i_daddu(p, ptr, ptr, tmp); uasm_i_dmfc0(p, tmp, C0_BADVADDR); @@ -1033,6 +1049,7 @@ build_pte_modifiable(u32 **p, struct uasm_reloc **r, iPTE_LW(p, pte, ptr); } +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT /* * R3000 style TLB load/store/modify handlers. */ @@ -1184,6 +1201,7 @@ static void __cpuinit build_r3000_tlb_modify_handler(void) dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm)); } +#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */ /* * R4000 style TLB load/store/modify handlers. @@ -1400,6 +1418,7 @@ void __cpuinit build_tlb_refill_handler(void) case CPU_TX3912: case CPU_TX3922: case CPU_TX3927: +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT build_r3000_tlb_refill_handler(); if (!run_once) { build_r3000_tlb_load_handler(); @@ -1407,6 +1426,9 @@ void __cpuinit build_tlb_refill_handler(void) build_r3000_tlb_modify_handler(); run_once++; } +#else + panic("No R3000 TLB refill handler"); +#endif break; case CPU_R6000: diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c index f467199676a..0a165c5179a 100644 --- a/arch/mips/mm/uasm.c +++ b/arch/mips/mm/uasm.c @@ -60,11 +60,11 @@ enum opcode { insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl, insn_bne, insn_cache, insn_daddu, insn_daddiu, insn_dmfc0, insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, - insn_dsrl32, insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, - insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, + insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal, + insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll, insn_sra, insn_srl, insn_subu, insn_sw, - insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori + insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori, insn_dins }; struct insn { @@ -104,6 +104,7 @@ static struct insn insn_table[] __cpuinitdata = { { insn_dsra, M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE }, { insn_dsrl, M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE }, { insn_dsrl32, M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE }, + { insn_drotr, M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE }, { insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD }, { insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 }, { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM }, @@ -132,6 +133,7 @@ static struct insn insn_table[] __cpuinitdata = { { insn_tlbwr, M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0 }, { insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD }, { insn_xori, M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM }, + { insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE }, { insn_invalid, 0, 0 } }; @@ -304,6 +306,12 @@ Ip_u2u1s3(op) \ build_insn(buf, insn##op, b, a, c); \ } +#define I_u2u1msbu3(op) \ +Ip_u2u1msbu3(op) \ +{ \ + build_insn(buf, insn##op, b, a, c+d-1, c); \ +} + #define I_u1u2(op) \ Ip_u1u2(op) \ { \ @@ -349,6 +357,7 @@ I_u2u1u3(_dsll32) I_u2u1u3(_dsra) I_u2u1u3(_dsrl) I_u2u1u3(_dsrl32) +I_u2u1u3(_drotr) I_u3u1u2(_dsubu) I_0(_eret) I_u1(_j) @@ -377,6 +386,7 @@ I_0(_tlbwi) I_0(_tlbwr) I_u3u1u2(_xor) I_u2u1u3(_xori) +I_u2u1msbu3(_dins); /* Handle labels. */ void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid) diff --git a/arch/mips/mm/uasm.h b/arch/mips/mm/uasm.h index c6d1e3dd82d..3d153edaa51 100644 --- a/arch/mips/mm/uasm.h +++ b/arch/mips/mm/uasm.h @@ -34,6 +34,11 @@ uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c) void __cpuinit \ uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c) +#define Ip_u2u1msbu3(op) \ +void __cpuinit \ +uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c, \ + unsigned int d) + #define Ip_u1u2(op) \ void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b) @@ -65,6 +70,7 @@ Ip_u2u1u3(_dsll32); Ip_u2u1u3(_dsra); Ip_u2u1u3(_dsrl); Ip_u2u1u3(_dsrl32); +Ip_u2u1u3(_drotr); Ip_u3u1u2(_dsubu); Ip_0(_eret); Ip_u1(_j); @@ -93,6 +99,7 @@ Ip_0(_tlbwi); Ip_0(_tlbwr); Ip_u3u1u2(_xor); Ip_u2u1u3(_xori); +Ip_u2u1msbu3(_dins); /* Handle labels. */ struct uasm_label { diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index 9035c64bc5e..b27419c8491 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -55,7 +55,7 @@ static struct prom_pmemblock * __init prom_getmdesc(void) char *memsize_str; unsigned int memsize; char *ptr; - static char cmdline[CL_SIZE] __initdata; + static char cmdline[COMMAND_LINE_SIZE] __initdata; /* otherwise look in the environment */ memsize_str = prom_getenv("memsize"); diff --git a/arch/mips/nxp/pnx833x/common/interrupts.c b/arch/mips/nxp/pnx833x/common/interrupts.c index 30533ba200e..3a467c04f81 100644 --- a/arch/mips/nxp/pnx833x/common/interrupts.c +++ b/arch/mips/nxp/pnx833x/common/interrupts.c @@ -295,7 +295,7 @@ static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type) } static struct irq_chip pnx833x_pic_irq_type = { - .typename = "PNX-PIC", + .name = "PNX-PIC", .startup = pnx833x_startup_pic_irq, .shutdown = pnx833x_shutdown_pic_irq, .enable = pnx833x_enable_pic_irq, @@ -305,7 +305,7 @@ static struct irq_chip pnx833x_pic_irq_type = { }; static struct irq_chip pnx833x_gpio_irq_type = { - .typename = "PNX-GPIO", + .name = "PNX-GPIO", .startup = pnx833x_startup_gpio_irq, .shutdown = pnx833x_disable_gpio_irq, .enable = pnx833x_enable_gpio_irq, diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c index 575cd147347..475ff46712a 100644 --- a/arch/mips/oprofile/op_model_loongson2.c +++ b/arch/mips/oprofile/op_model_loongson2.c @@ -1,7 +1,7 @@ /* * Loongson2 performance counter driver for oprofile * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Yanhua <yanh@lemote.com> * Author: Wu Zhangjin <wuzj@lemote.com> * @@ -125,6 +125,9 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id) */ /* Check whether the irq belongs to me */ + enabled = read_c0_perfcnt() & LOONGSON2_PERFCNT_INT_EN; + if (!enabled) + return IRQ_NONE; enabled = reg.cnt1_enabled | reg.cnt2_enabled; if (!enabled) return IRQ_NONE; diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 91bfe73a7f6..c9209ca6c8e 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -22,13 +22,13 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ # # These are still pretty much in the old state, watch, go blind. # -obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o -obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-bonito64.o +obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o +obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o diff --git a/arch/mips/pci/fixup-excite.c b/arch/mips/pci/fixup-excite.c deleted file mode 100644 index cd64d9f177c..00000000000 --- a/arch/mips/pci/fixup-excite.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <excite.h> - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (pin == 0) - return -1; - - return USB_IRQ; /* USB controller is the only PCI device */ -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c index 0c4c7a81213..4f6d8da07f9 100644 --- a/arch/mips/pci/fixup-fuloong2e.c +++ b/arch/mips/pci/fixup-fuloong2e.c @@ -13,7 +13,8 @@ */ #include <linux/init.h> #include <linux/pci.h> -#include <asm/mips-boards/bonito64.h> + +#include <loongson.h> /* South bridge slot number is set by the pci probe process */ static u8 sb_slot = 5; @@ -35,7 +36,7 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) break; } } else { - irq = BONITO_IRQ_BASE + 25 + pin; + irq = LOONGSON_IRQ_BASE + 25 + pin; } return irq; diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c new file mode 100644 index 00000000000..caf2edeb02f --- /dev/null +++ b/arch/mips/pci/fixup-lemote2f.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2008 Lemote Technology + * Copyright (C) 2004 ICT CAS + * Author: Li xiaoyu, lixy@ict.ac.cn + * + * Copyright (C) 2007 Lemote, Inc. + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/pci.h> + +#include <loongson.h> +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +/* PCI interrupt pins + * + * These should not be changed, or you should consider loongson2f interrupt + * register and your pci card dispatch + */ + +#define PCIA 4 +#define PCIB 5 +#define PCIC 6 +#define PCID 7 + +/* all the pci device has the PCIA pin, check the datasheet. */ +static char irq_tab[][5] __initdata = { + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0}, /* 11: Unused */ + {0, 0, 0, 0, 0}, /* 12: Unused */ + {0, 0, 0, 0, 0}, /* 13: Unused */ + {0, 0, 0, 0, 0}, /* 14: Unused */ + {0, 0, 0, 0, 0}, /* 15: Unused */ + {0, 0, 0, 0, 0}, /* 16: Unused */ + {0, PCIA, 0, 0, 0}, /* 17: RTL8110-0 */ + {0, PCIB, 0, 0, 0}, /* 18: RTL8110-1 */ + {0, PCIC, 0, 0, 0}, /* 19: SiI3114 */ + {0, PCID, 0, 0, 0}, /* 20: 3-ports nec usb */ + {0, PCIA, PCIB, PCIC, PCID}, /* 21: PCI-SLOT */ + {0, 0, 0, 0, 0}, /* 22: Unused */ + {0, 0, 0, 0, 0}, /* 23: Unused */ + {0, 0, 0, 0, 0}, /* 24: Unused */ + {0, 0, 0, 0, 0}, /* 25: Unused */ + {0, 0, 0, 0, 0}, /* 26: Unused */ + {0, 0, 0, 0, 0}, /* 27: Unused */ +}; + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int virq; + + if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536) + && (PCI_SLOT(dev->devfn) < 32)) { + virq = irq_tab[slot][pin]; + printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin, + virq + LOONGSON_IRQ_BASE); + if (virq != 0) + return LOONGSON_IRQ_BASE + virq; + else + return 0; + } else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) { /* cs5536 */ + switch (PCI_FUNC(dev->devfn)) { + case 2: + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_IDE_INTR); + return CS5536_IDE_INTR; /* for IDE */ + case 3: + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_ACC_INTR); + return CS5536_ACC_INTR; /* for AUDIO */ + case 4: /* for OHCI */ + case 5: /* for EHCI */ + case 6: /* for UDC */ + case 7: /* for OTG */ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_USB_INTR); + return CS5536_USB_INTR; + } + return dev->irq; + } else { + printk(KERN_INFO " strange pci slot number.\n"); + return 0; + } +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +/* CS5536 SPEC. fixup */ +static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev) +{ + /* the uart1 and uart2 interrupt in PIC is enabled as default */ + pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1); + pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1); +} + +static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev) +{ + /* setting the mutex pin as IDE function */ + pci_write_config_dword(pdev, PCI_IDE_CFG_REG, + CS5536_IDE_FLASH_SIGNATURE); +} + +static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev) +{ + /* enable the AUDIO interrupt in PIC */ + pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1); + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0); +} + +static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev) +{ + /* enable the OHCI interrupt in PIC */ + /* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */ + pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1); +} + +static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev) +{ + u32 hi, lo; + + /* Serial short detect enable */ + _rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo); + _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo); + + /* setting the USB2.0 micro frame length */ + pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000); +} + +static void __init loongson_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + pci_read_config_dword(pdev, 0xe0, &val); + /* Only 2 port be used */ + pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, + loongson_cs5536_isa_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC, + loongson_cs5536_ohci_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC, + loongson_cs5536_ehci_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO, + loongson_cs5536_acc_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, + loongson_cs5536_ide_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + loongson_nec_fixup); diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c index 54e55e7a243..1b3e03f20c5 100644 --- a/arch/mips/pci/ops-bonito64.c +++ b/arch/mips/pci/ops-bonito64.c @@ -29,13 +29,8 @@ #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 -#ifdef CONFIG_LEMOTE_FULOONG2E -#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset)) -#define ID_SEL_BEGIN 11 -#else #define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset)) #define ID_SEL_BEGIN 10 -#endif #define MAX_DEV_NUM (31 - ID_SEL_BEGIN) @@ -77,10 +72,8 @@ static int bonito64_pcibios_config_access(unsigned char access_type, addrp = CFG_SPACE_REG(addr & 0xffff); if (access_type == PCI_ACCESS_WRITE) { writel(cpu_to_le32(*data), addrp); -#ifndef CONFIG_LEMOTE_FULOONG2E /* Wait till done */ while (BONITO_PCIMSTAT & 0xF); -#endif } else { *data = le32_to_cpu(readl(addrp)); } diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c new file mode 100644 index 00000000000..aa5d3da2721 --- /dev/null +++ b/arch/mips/pci/ops-loongson2.c @@ -0,0 +1,208 @@ +/* + * fuloong2e specific PCI support. + * + * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard <carstenl@mips.com> + * Maciej W. Rozycki <macro@mips.com> + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + */ +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <loongson.h> + +#ifdef CONFIG_CS5536 +#include <cs5536/cs5536_pci.h> +#include <cs5536/cs5536.h> +#endif + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +#define CFG_SPACE_REG(offset) \ + (void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset)) +#define ID_SEL_BEGIN 11 +#define MAX_DEV_NUM (31 - ID_SEL_BEGIN) + + +static int loongson_pcibios_config_access(unsigned char access_type, + struct pci_bus *bus, + unsigned int devfn, int where, + u32 *data) +{ + u32 busnum = bus->number; + u32 addr, type; + u32 dummy; + void *addrp; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int reg = where & ~3; + + if (busnum == 0) { + /* board-specific part,currently,only fuloong2f,yeeloong2f + * use CS5536, fuloong2e use via686b, gdium has no + * south bridge + */ +#ifdef CONFIG_CS5536 + /* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to + * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO, + * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it + * will not go this branch, but the others. so, no calling dead + * loop here. + */ + if ((PCI_IDSEL_CS5536 == device) && (reg < PCI_MSR_CTRL)) { + switch (access_type) { + case PCI_ACCESS_READ: + *data = cs5536_pci_conf_read4(function, reg); + break; + case PCI_ACCESS_WRITE: + cs5536_pci_conf_write4(function, reg, *data); + break; + } + return 0; + } +#endif + /* Type 0 configuration for onboard PCI bus */ + if (device > MAX_DEV_NUM) + return -1; + + addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg; + type = 0; + } else { + /* Type 1 configuration for offboard PCI bus */ + addr = (busnum << 16) | (device << 11) | (function << 8) | reg; + type = 0x10000; + } + + /* Clear aborts */ + LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \ + LOONGSON_PCICMD_MTABORT_CLR; + + LOONGSON_PCIMAP_CFG = (addr >> 16) | type; + + /* Flush Bonito register block */ + dummy = LOONGSON_PCIMAP_CFG; + mmiowb(); + + addrp = CFG_SPACE_REG(addr & 0xffff); + if (access_type == PCI_ACCESS_WRITE) + writel(cpu_to_le32(*data), addrp); + else + *data = le32_to_cpu(readl(addrp)); + + /* Detect Master/Target abort */ + if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR | + LOONGSON_PCICMD_MTABORT_CLR)) { + /* Error occurred */ + + /* Clear bits */ + LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR | + LOONGSON_PCICMD_MTABORT_CLR); + + return -1; + } + + return 0; + +} + + +/* + * We can't address 8 and 16 bit words directly. Instead we have to + * read/write a 32bit word and mask/modify the data we actually want. + */ +static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, + &data)) + return -1; + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (size == 4) + data = val; + else { + if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) + return -1; + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + } + + if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where, + &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops loongson_pci_ops = { + .read = loongson_pcibios_read, + .write = loongson_pcibios_write +}; + +#ifdef CONFIG_CS5536 +void _rdmsr(u32 msr, u32 *hi, u32 *lo) +{ + struct pci_bus bus = { + .number = PCI_BUS_CS5536 + }; + u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0); + loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr); + loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo); + loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi); +} +EXPORT_SYMBOL(_rdmsr); + +void _wrmsr(u32 msr, u32 hi, u32 lo) +{ + struct pci_bus bus = { + .number = PCI_BUS_CS5536 + }; + u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0); + loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr); + loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo); + loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi); +} +EXPORT_SYMBOL(_wrmsr); +#endif diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c deleted file mode 100644 index 8a56876afcc..00000000000 --- a/arch/mips/pci/pci-excite.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/bitops.h> -#include <asm/rm9k-ocd.h> -#include <excite.h> - - -extern struct pci_ops titan_pci_ops; - - -static struct resource - mem_resource = { - .name = "PCI memory", - .start = EXCITE_PHYS_PCI_MEM, - .end = EXCITE_PHYS_PCI_MEM + EXCITE_SIZE_PCI_MEM - 1, - .flags = IORESOURCE_MEM - }, - io_resource = { - .name = "PCI I/O", - .start = EXCITE_PHYS_PCI_IO, - .end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1, - .flags = IORESOURCE_IO - }; - - -static struct pci_controller bx_controller = { - .pci_ops = &titan_pci_ops, - .mem_resource = &mem_resource, - .mem_offset = 0x00000000UL, - .io_resource = &io_resource, - .io_offset = 0x00000000UL -}; - - -static char - iopage_failed[] __initdata = "Cannot allocate PCI I/O page", - modebits_no_pci[] __initdata = "PCI is not configured in mode bits"; - -#define RM9000x2_OCD_HTSC 0x0604 -#define RM9000x2_OCD_HTBHL 0x060c -#define RM9000x2_OCD_PCIHRST 0x078c - -#define RM9K_OCD_MODEBIT1 0x00d4 /* (MODEBIT1) Mode Bit 1 */ -#define RM9K_OCD_CPHDCR 0x00f4 /* CPU-PCI/HT Data Control. */ - -#define PCISC_FB2B 0x00000200 -#define PCISC_MWICG 0x00000010 -#define PCISC_EMC 0x00000004 -#define PCISC_ERMA 0x00000002 - - - -static int __init basler_excite_pci_setup(void) -{ - const unsigned int fullbars = memsize / (256 << 20); - unsigned int i; - - /* Check modebits to see if PCI is really enabled. */ - if (!((ocd_readl(RM9K_OCD_MODEBIT1) >> (47-32)) & 0x1)) - panic(modebits_no_pci); - - if (NULL == request_mem_region(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO, - "Memory-mapped PCI I/O page")) - panic(iopage_failed); - - /* Enable PCI 0 as master for config cycles */ - ocd_writel(PCISC_EMC | PCISC_ERMA, RM9000x2_OCD_HTSC); - - - /* Set up latency timer */ - ocd_writel(0x8008, RM9000x2_OCD_HTBHL); - - /* Setup host IO and Memory space */ - ocd_writel((EXCITE_PHYS_PCI_IO >> 4) | 1, LKB7); - ocd_writel(((EXCITE_SIZE_PCI_IO >> 4) & 0x7fffff00) - 0x100, LKM7); - ocd_writel((EXCITE_PHYS_PCI_MEM >> 4) | 1, LKB8); - ocd_writel(((EXCITE_SIZE_PCI_MEM >> 4) & 0x7fffff00) - 0x100, LKM8); - - /* Set up PCI BARs to map all installed memory */ - for (i = 0; i < 6; i++) { - const unsigned int bar = 0x610 + i * 4; - - if (i < fullbars) { - ocd_writel(0x10000000 * i, bar); - ocd_writel(0x01000000 * i, bar + 0x140); - ocd_writel(0x0ffff029, bar + 0x100); - continue; - } - - if (i == fullbars) { - int o; - u32 mask; - - const unsigned long rem = memsize - i * 0x10000000; - if (!rem) { - ocd_writel(0x00000000, bar + 0x100); - continue; - } - - o = ffs(rem) - 1; - if (rem & ~(0x1 << o)) - o++; - mask = ((0x1 << o) & 0x0ffff000) - 0x1000; - ocd_writel(0x10000000 * i, bar); - ocd_writel(0x01000000 * i, bar + 0x140); - ocd_writel(0x00000029 | mask, bar + 0x100); - continue; - } - - ocd_writel(0x00000000, bar + 0x100); - } - - /* Finally, enable the PCI interrupt */ -#if USB_IRQ > 7 - set_c0_intcontrol(1 << USB_IRQ); -#else - set_c0_status(1 << (USB_IRQ + 8)); -#endif - - ioport_resource.start = EXCITE_PHYS_PCI_IO; - ioport_resource.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1; - set_io_port_base((unsigned long) ioremap_nocache(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO)); - register_pci_controller(&bx_controller); - return 0; -} - - -arch_initcall(basler_excite_pci_setup); diff --git a/arch/mips/powertv/Kconfig b/arch/mips/powertv/Kconfig new file mode 100644 index 00000000000..ff0e7e3e695 --- /dev/null +++ b/arch/mips/powertv/Kconfig @@ -0,0 +1,21 @@ +source "arch/mips/powertv/asic/Kconfig" + +config BOOTLOADER_DRIVER + bool "PowerTV Bootloader Driver Support" + default n + depends on POWERTV + help + Use this option if you want to load bootloader driver. + +config BOOTLOADER_FAMILY + string "POWERTV Bootloader Family string" + default "85" + depends on POWERTV && !BOOTLOADER_DRIVER + help + This value should be specified when the bootloader driver is disabled + and must be exactly two characters long. Families supported are: + R1 - RNG-100 R2 - RNG-200 + A1 - Class A B1 - Class B + E1 - Class E F1 - Class F + 44 - 45xx 46 - 46xx + 85 - 85xx 86 - 86xx diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile new file mode 100644 index 00000000000..2c516718aff --- /dev/null +++ b/arch/mips/powertv/Makefile @@ -0,0 +1,28 @@ +# +# Carsten Langgaard, carstenl@mips.com +# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. +# +# Carsten Langgaard, carstenl@mips.com +# Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. +# Portions copyright (C) 2009 Cisco Systems, Inc. +# +# This program is free software; you can distribute it and/or modify it +# under the terms of the GNU General Public License (Version 2) as +# published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +# +# Makefile for the Cisco PowerTV-specific kernel interface routines +# under Linux. +# + +obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/ + +EXTRA_CFLAGS += -Wall -Werror diff --git a/arch/mips/powertv/asic/Kconfig b/arch/mips/powertv/asic/Kconfig new file mode 100644 index 00000000000..2016bfe94d6 --- /dev/null +++ b/arch/mips/powertv/asic/Kconfig @@ -0,0 +1,28 @@ +config MIN_RUNTIME_RESOURCES + bool "Support for minimum runtime resources" + default n + depends on POWERTV + help + Enables support for minimizing the number of (SA asic) runtime + resources that are preallocated by the kernel. + +config MIN_RUNTIME_DOCSIS + bool "Support for minimum DOCSIS resource" + default y + depends on MIN_RUNTIME_RESOURCES + help + Enables support for the preallocated DOCSIS resource. + +config MIN_RUNTIME_PMEM + bool "Support for minimum PMEM resource" + default y + depends on MIN_RUNTIME_RESOURCES + help + Enables support for the preallocated Memory resource. + +config MIN_RUNTIME_TFTP + bool "Support for minimum TFTP resource" + default y + depends on MIN_RUNTIME_RESOURCES + help + Enables support for the preallocated TFTP resource. diff --git a/arch/mips/powertv/asic/Makefile b/arch/mips/powertv/asic/Makefile new file mode 100644 index 00000000000..bebfdcff044 --- /dev/null +++ b/arch/mips/powertv/asic/Makefile @@ -0,0 +1,23 @@ +# +# Copyright (C) 2009 Scientific-Atlanta, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +obj-y += asic-calliope.o asic-cronus.o asic-zeus.o asic_devices.o asic_int.o \ + irq_asic.o prealloc-calliope.o prealloc-cronus.o \ + prealloc-cronuslite.o prealloc-zeus.o + +EXTRA_CFLAGS += -Wall -Werror diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c new file mode 100644 index 00000000000..03d3884c627 --- /dev/null +++ b/arch/mips/powertv/asic/asic-calliope.c @@ -0,0 +1,98 @@ +/* + * Locations of devices in the Calliope ASIC. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> + * + * Description: Defines the platform resources for the SA settop. + */ + +#include <asm/mach-powertv/asic.h> + +const struct register_map calliope_register_map = { + .eic_slow0_strt_add = 0x800000, + .eic_cfg_bits = 0x800038, + .eic_ready_status = 0x80004c, + + .chipver3 = 0xA00800, + .chipver2 = 0xA00804, + .chipver1 = 0xA00808, + .chipver0 = 0xA0080c, + + /* The registers of IRBlaster */ + .uart1_intstat = 0xA01800, + .uart1_inten = 0xA01804, + .uart1_config1 = 0xA01808, + .uart1_config2 = 0xA0180C, + .uart1_divisorhi = 0xA01810, + .uart1_divisorlo = 0xA01814, + .uart1_data = 0xA01818, + .uart1_status = 0xA0181C, + + .int_stat_3 = 0xA02800, + .int_stat_2 = 0xA02804, + .int_stat_1 = 0xA02808, + .int_stat_0 = 0xA0280c, + .int_config = 0xA02810, + .int_int_scan = 0xA02818, + .ien_int_3 = 0xA02830, + .ien_int_2 = 0xA02834, + .ien_int_1 = 0xA02838, + .ien_int_0 = 0xA0283c, + .int_level_3_3 = 0xA02880, + .int_level_3_2 = 0xA02884, + .int_level_3_1 = 0xA02888, + .int_level_3_0 = 0xA0288c, + .int_level_2_3 = 0xA02890, + .int_level_2_2 = 0xA02894, + .int_level_2_1 = 0xA02898, + .int_level_2_0 = 0xA0289c, + .int_level_1_3 = 0xA028a0, + .int_level_1_2 = 0xA028a4, + .int_level_1_1 = 0xA028a8, + .int_level_1_0 = 0xA028ac, + .int_level_0_3 = 0xA028b0, + .int_level_0_2 = 0xA028b4, + .int_level_0_1 = 0xA028b8, + .int_level_0_0 = 0xA028bc, + .int_docsis_en = 0xA028F4, + + .mips_pll_setup = 0x980000, + .usb_fs = 0x980030, /* -default 72800028- */ + .test_bus = 0x9800CC, + .crt_spare = 0x9800d4, + .usb2_ohci_int_mask = 0x9A000c, + .usb2_strap = 0x9A0014, + .ehci_hcapbase = 0x9BFE00, + .ohci_hc_revision = 0x9BFC00, + .bcm1_bs_lmi_steer = 0x9E0004, + .usb2_control = 0x9E0054, + .usb2_stbus_obc = 0x9BFF00, + .usb2_stbus_mess_size = 0x9BFF04, + .usb2_stbus_chunk_size = 0x9BFF08, + + .pcie_regs = 0x000000, /* -doesn't exist- */ + .tim_ch = 0xA02C10, + .tim_cl = 0xA02C14, + .gpio_dout = 0xA02c20, + .gpio_din = 0xA02c24, + .gpio_dir = 0xA02c2C, + .watchdog = 0xA02c30, + .front_panel = 0x000000, /* -not used- */ +}; diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c new file mode 100644 index 00000000000..5f4589c9f83 --- /dev/null +++ b/arch/mips/powertv/asic/asic-cronus.c @@ -0,0 +1,98 @@ +/* + * Locations of devices in the Cronus ASIC + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> + * + * Description: Defines the platform resources for the SA settop. + */ + +#include <asm/mach-powertv/asic.h> + +const struct register_map cronus_register_map = { + .eic_slow0_strt_add = 0x000000, + .eic_cfg_bits = 0x000038, + .eic_ready_status = 0x00004C, + + .chipver3 = 0x2A0800, + .chipver2 = 0x2A0804, + .chipver1 = 0x2A0808, + .chipver0 = 0x2A080C, + + /* The registers of IRBlaster */ + .uart1_intstat = 0x2A1800, + .uart1_inten = 0x2A1804, + .uart1_config1 = 0x2A1808, + .uart1_config2 = 0x2A180C, + .uart1_divisorhi = 0x2A1810, + .uart1_divisorlo = 0x2A1814, + .uart1_data = 0x2A1818, + .uart1_status = 0x2A181C, + + .int_stat_3 = 0x2A2800, + .int_stat_2 = 0x2A2804, + .int_stat_1 = 0x2A2808, + .int_stat_0 = 0x2A280C, + .int_config = 0x2A2810, + .int_int_scan = 0x2A2818, + .ien_int_3 = 0x2A2830, + .ien_int_2 = 0x2A2834, + .ien_int_1 = 0x2A2838, + .ien_int_0 = 0x2A283C, + .int_level_3_3 = 0x2A2880, + .int_level_3_2 = 0x2A2884, + .int_level_3_1 = 0x2A2888, + .int_level_3_0 = 0x2A288C, + .int_level_2_3 = 0x2A2890, + .int_level_2_2 = 0x2A2894, + .int_level_2_1 = 0x2A2898, + .int_level_2_0 = 0x2A289C, + .int_level_1_3 = 0x2A28A0, + .int_level_1_2 = 0x2A28A4, + .int_level_1_1 = 0x2A28A8, + .int_level_1_0 = 0x2A28AC, + .int_level_0_3 = 0x2A28B0, + .int_level_0_2 = 0x2A28B4, + .int_level_0_1 = 0x2A28B8, + .int_level_0_0 = 0x2A28BC, + .int_docsis_en = 0x2A28F4, + + .mips_pll_setup = 0x1C0000, + .usb_fs = 0x1C0018, + .test_bus = 0x1C00CC, + .crt_spare = 0x1c00d4, + .usb2_ohci_int_mask = 0x20000C, + .usb2_strap = 0x200014, + .ehci_hcapbase = 0x21FE00, + .ohci_hc_revision = 0x1E0000, + .bcm1_bs_lmi_steer = 0x2E0008, + .usb2_control = 0x2E004C, + .usb2_stbus_obc = 0x21FF00, + .usb2_stbus_mess_size = 0x21FF04, + .usb2_stbus_chunk_size = 0x21FF08, + + .pcie_regs = 0x220000, + .tim_ch = 0x2A2C10, + .tim_cl = 0x2A2C14, + .gpio_dout = 0x2A2C20, + .gpio_din = 0x2A2C24, + .gpio_dir = 0x2A2C2C, + .watchdog = 0x2A2C30, + .front_panel = 0x2A3800, +}; diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c new file mode 100644 index 00000000000..1469daab920 --- /dev/null +++ b/arch/mips/powertv/asic/asic-zeus.c @@ -0,0 +1,98 @@ +/* + * Locations of devices in the Zeus ASIC + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> + * + * Description: Defines the platform resources for the SA settop. + */ + +#include <asm/mach-powertv/asic.h> + +const struct register_map zeus_register_map = { + .eic_slow0_strt_add = 0x000000, + .eic_cfg_bits = 0x000038, + .eic_ready_status = 0x00004c, + + .chipver3 = 0x280800, + .chipver2 = 0x280804, + .chipver1 = 0x280808, + .chipver0 = 0x28080c, + + /* The registers of IRBlaster */ + .uart1_intstat = 0x281800, + .uart1_inten = 0x281804, + .uart1_config1 = 0x281808, + .uart1_config2 = 0x28180C, + .uart1_divisorhi = 0x281810, + .uart1_divisorlo = 0x281814, + .uart1_data = 0x281818, + .uart1_status = 0x28181C, + + .int_stat_3 = 0x282800, + .int_stat_2 = 0x282804, + .int_stat_1 = 0x282808, + .int_stat_0 = 0x28280c, + .int_config = 0x282810, + .int_int_scan = 0x282818, + .ien_int_3 = 0x282830, + .ien_int_2 = 0x282834, + .ien_int_1 = 0x282838, + .ien_int_0 = 0x28283c, + .int_level_3_3 = 0x282880, + .int_level_3_2 = 0x282884, + .int_level_3_1 = 0x282888, + .int_level_3_0 = 0x28288c, + .int_level_2_3 = 0x282890, + .int_level_2_2 = 0x282894, + .int_level_2_1 = 0x282898, + .int_level_2_0 = 0x28289c, + .int_level_1_3 = 0x2828a0, + .int_level_1_2 = 0x2828a4, + .int_level_1_1 = 0x2828a8, + .int_level_1_0 = 0x2828ac, + .int_level_0_3 = 0x2828b0, + .int_level_0_2 = 0x2828b4, + .int_level_0_1 = 0x2828b8, + .int_level_0_0 = 0x2828bc, + .int_docsis_en = 0x2828F4, + + .mips_pll_setup = 0x1a0000, + .usb_fs = 0x1a0018, + .test_bus = 0x1a0238, + .crt_spare = 0x1a0090, + .usb2_ohci_int_mask = 0x1e000c, + .usb2_strap = 0x1e0014, + .ehci_hcapbase = 0x1FFE00, + .ohci_hc_revision = 0x1FFC00, + .bcm1_bs_lmi_steer = 0x2C0008, + .usb2_control = 0x2c01a0, + .usb2_stbus_obc = 0x1FFF00, + .usb2_stbus_mess_size = 0x1FFF04, + .usb2_stbus_chunk_size = 0x1FFF08, + + .pcie_regs = 0x200000, + .tim_ch = 0x282C10, + .tim_cl = 0x282C14, + .gpio_dout = 0x282c20, + .gpio_din = 0x282c24, + .gpio_dir = 0x282c2C, + .watchdog = 0x282c30, + .front_panel = 0x283800, +}; diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c new file mode 100644 index 00000000000..bae82880b6b --- /dev/null +++ b/arch/mips/powertv/asic/asic_devices.c @@ -0,0 +1,787 @@ +/* + * ASIC Device List Intialization + * + * Description: Defines the platform resources for the SA settop. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> + * + * Description: Defines the platform resources for the SA settop. + * + * NOTE: The bootloader allocates persistent memory at an address which is + * 16 MiB below the end of the highest address in KSEG0. All fixed + * address memory reservations must avoid this region. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/resource.h> +#include <linux/serial_reg.h> +#include <linux/io.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <asm/page.h> +#include <linux/swap.h> +#include <linux/highmem.h> +#include <linux/dma-mapping.h> + +#include <asm/mach-powertv/asic.h> +#include <asm/mach-powertv/asic_regs.h> +#include <asm/mach-powertv/interrupts.h> + +#ifdef CONFIG_BOOTLOADER_DRIVER +#include <asm/mach-powertv/kbldr.h> +#endif +#include <asm/bootinfo.h> + +#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0)) + +/* + * Forward Prototypes + */ +static void pmem_setup_resource(void); + +/* + * Global Variables + */ +enum asic_type asic; + +unsigned int platform_features; +unsigned int platform_family; +const struct register_map *register_map; +EXPORT_SYMBOL(register_map); /* Exported for testing */ +unsigned long asic_phy_base; +unsigned long asic_base; +EXPORT_SYMBOL(asic_base); /* Exported for testing */ +struct resource *gp_resources; +static bool usb_configured; + +/* + * Don't recommend to use it directly, it is usually used by kernel internally. + * Portable code should be using interfaces such as ioremp, dma_map_single, etc. + */ +unsigned long phys_to_bus_offset; +EXPORT_SYMBOL(phys_to_bus_offset); + +/* + * + * IO Resource Definition + * + */ + +struct resource asic_resource = { + .name = "ASIC Resource", + .start = 0, + .end = ASIC_IO_SIZE, + .flags = IORESOURCE_MEM, +}; + +/* + * + * USB Host Resource Definition + * + */ + +static struct resource ehci_resources[] = { + { + .parent = &asic_resource, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = irq_usbehci, + .end = irq_usbehci, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ehci_dmamask = DMA_BIT_MASK(32); + +static struct platform_device ehci_device = { + .name = "powertv-ehci", + .id = 0, + .num_resources = 2, + .resource = ehci_resources, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource ohci_resources[] = { + { + .parent = &asic_resource, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = irq_usbohci, + .end = irq_usbohci, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ohci_dmamask = DMA_BIT_MASK(32); + +static struct platform_device ohci_device = { + .name = "powertv-ohci", + .id = 0, + .num_resources = 2, + .resource = ohci_resources, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct platform_device *platform_devices[] = { + &ehci_device, + &ohci_device, +}; + +/* + * + * Platform Configuration and Device Initialization + * + */ +static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3) +{ + int en_prg, byp, pwr, nsb, val; + int sout; + + sout = 1; + en_prg = 1; + byp = 0; + nsb = 1; + pwr = 1; + + val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) | + (nsb<<1) | (disable_div_by_3<<5)); + + asic_write(val, usb_fs); + asic_write(val | (en_prg<<4), usb_fs); + asic_write(val | (en_prg<<4) | pwr, usb_fs); +} + +/* + * Allow override of bootloader-specified model + */ +static char __initdata cmdline[COMMAND_LINE_SIZE]; + +#define FORCEFAMILY_PARAM "forcefamily" + +static __init int check_forcefamily(unsigned char forced_family[2]) +{ + const char *p; + + forced_family[0] = '\0'; + forced_family[1] = '\0'; + + /* Check the command line for a forcefamily directive */ + strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1); + p = strstr(cmdline, FORCEFAMILY_PARAM); + if (p && (p != cmdline) && (*(p - 1) != ' ')) + p = strstr(p, " " FORCEFAMILY_PARAM "="); + + if (p) { + p += strlen(FORCEFAMILY_PARAM "="); + + if (*p == '\0' || *(p + 1) == '\0' || + (*(p + 2) != '\0' && *(p + 2) != ' ')) + pr_err(FORCEFAMILY_PARAM " must be exactly two " + "characters long, ignoring value\n"); + + else { + forced_family[0] = *p; + forced_family[1] = *(p + 1); + } + } + + return 0; +} + +/* + * platform_set_family - determine major platform family type. + * + * Returns family type; -1 if none + * Returns the family type; -1 if none + * + */ +static __init noinline void platform_set_family(void) +{ +#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0)) + + unsigned char forced_family[2]; + unsigned short bootldr_family; + + check_forcefamily(forced_family); + + if (forced_family[0] != '\0' && forced_family[1] != '\0') + bootldr_family = BOOTLDRFAMILY(forced_family[0], + forced_family[1]); + else { + +#ifdef CONFIG_BOOTLOADER_DRIVER + bootldr_family = (unsigned short) kbldr_GetSWFamily(); +#else +#if defined(CONFIG_BOOTLOADER_FAMILY) + bootldr_family = (unsigned short) BOOTLDRFAMILY( + CONFIG_BOOTLOADER_FAMILY[0], + CONFIG_BOOTLOADER_FAMILY[1]); +#else +#error "Unknown Bootloader Family" +#endif +#endif + } + + pr_info("Bootloader Family = 0x%04X\n", bootldr_family); + + switch (bootldr_family) { + case BOOTLDRFAMILY('R', '1'): + platform_family = FAMILY_1500; + break; + case BOOTLDRFAMILY('4', '4'): + platform_family = FAMILY_4500; + break; + case BOOTLDRFAMILY('4', '6'): + platform_family = FAMILY_4600; + break; + case BOOTLDRFAMILY('A', '1'): + platform_family = FAMILY_4600VZA; + break; + case BOOTLDRFAMILY('8', '5'): + platform_family = FAMILY_8500; + break; + case BOOTLDRFAMILY('R', '2'): + platform_family = FAMILY_8500RNG; + break; + case BOOTLDRFAMILY('8', '6'): + platform_family = FAMILY_8600; + break; + case BOOTLDRFAMILY('B', '1'): + platform_family = FAMILY_8600VZB; + break; + case BOOTLDRFAMILY('E', '1'): + platform_family = FAMILY_1500VZE; + break; + case BOOTLDRFAMILY('F', '1'): + platform_family = FAMILY_1500VZF; + break; + default: + platform_family = -1; + } +} + +unsigned int platform_get_family(void) +{ + return platform_family; +} +EXPORT_SYMBOL(platform_get_family); + +/* + * \brief usb_eye_configure() for optimizing the USB eye on Calliope. + * + * \param unsigned int value saved to the register. + * + * \return none + * + */ +static void __init usb_eye_configure(unsigned int value) +{ + asic_write(asic_read(crt_spare) | value, crt_spare); +} + +/* + * platform_get_asic - determine the ASIC type. + * + * \param none + * + * \return ASIC type; ASIC_UNKNOWN if none + * + */ +enum asic_type platform_get_asic(void) +{ + return asic; +} +EXPORT_SYMBOL(platform_get_asic); + +/* + * platform_configure_usb - usb configuration based on platform type. + * @bcm1_usb2_ctl: value for the BCM1_USB2_CTL register, which is + * quirky + */ +static void __init platform_configure_usb(void) +{ + u32 bcm1_usb2_ctl; + + if (usb_configured) + return; + + switch (asic) { + case ASIC_ZEUS: + fs_update(0x0000, 0x11, 0x02, 0); + bcm1_usb2_ctl = 0x803; + break; + + case ASIC_CRONUS: + case ASIC_CRONUSLITE: + fs_update(0x0000, 0x11, 0x02, 0); + bcm1_usb2_ctl = 0x803; + break; + + case ASIC_CALLIOPE: + fs_update(0x0000, 0x11, 0x02, 1); + + switch (platform_family) { + case FAMILY_1500VZE: + break; + + case FAMILY_1500VZF: + usb_eye_configure(0x003c0000); + break; + + default: + usb_eye_configure(0x00300000); + break; + } + + bcm1_usb2_ctl = 0x803; + break; + + default: + pr_err("Unknown ASIC type: %d\n", asic); + break; + } + + /* turn on USB power */ + asic_write(0, usb2_strap); + /* Enable all OHCI interrupts */ + asic_write(bcm1_usb2_ctl, usb2_control); + /* USB2_STBUS_OBC store32/load32 */ + asic_write(3, usb2_stbus_obc); + /* USB2_STBUS_MESS_SIZE 2 packets */ + asic_write(1, usb2_stbus_mess_size); + /* USB2_STBUS_CHUNK_SIZE 2 packets */ + asic_write(1, usb2_stbus_chunk_size); + + usb_configured = true; +} + +/* + * Set up the USB EHCI interface + */ +void platform_configure_usb_ehci() +{ + platform_configure_usb(); +} + +/* + * Set up the USB OHCI interface + */ +void platform_configure_usb_ohci() +{ + platform_configure_usb(); +} + +/* + * Shut the USB EHCI interface down--currently a NOP + */ +void platform_unconfigure_usb_ehci() +{ +} + +/* + * Shut the USB OHCI interface down--currently a NOP + */ +void platform_unconfigure_usb_ohci() +{ +} + +/** + * configure_platform - configuration based on platform type. + */ +void __init configure_platform(void) +{ + platform_set_family(); + + switch (platform_family) { + case FAMILY_1500: + case FAMILY_1500VZE: + case FAMILY_1500VZF: + platform_features = FFS_CAPABLE; + asic = ASIC_CALLIOPE; + asic_phy_base = CALLIOPE_IO_BASE; + register_map = &calliope_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + + if (platform_family == FAMILY_1500VZE) { + gp_resources = non_dvr_vze_calliope_resources; + pr_info("Platform: 1500/Vz Class E - " + "CALLIOPE, NON_DVR_CAPABLE\n"); + } else if (platform_family == FAMILY_1500VZF) { + gp_resources = non_dvr_vzf_calliope_resources; + pr_info("Platform: 1500/Vz Class F - " + "CALLIOPE, NON_DVR_CAPABLE\n"); + } else { + gp_resources = non_dvr_calliope_resources; + pr_info("Platform: 1500/RNG100 - CALLIOPE, " + "NON_DVR_CAPABLE\n"); + } + break; + + case FAMILY_4500: + platform_features = FFS_CAPABLE | PCIE_CAPABLE | + DISPLAY_CAPABLE; + asic = ASIC_ZEUS; + asic_phy_base = ZEUS_IO_BASE; + register_map = &zeus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = non_dvr_zeus_resources; + + pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n"); + break; + + case FAMILY_4600: + { + unsigned int chipversion = 0; + + /* The settop has PCIE but it isn't used, so don't advertise + * it*/ + platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; + asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */ + register_map = &cronus_register_map; /* same as Cronus */ + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = non_dvr_cronuslite_resources; + + /* ASIC version will determine if this is a real CronusLite or + * Castrati(Cronus) */ + chipversion = asic_read(chipver3) << 24; + chipversion |= asic_read(chipver2) << 16; + chipversion |= asic_read(chipver1) << 8; + chipversion |= asic_read(chipver0); + + if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11)) + asic = ASIC_CRONUS; + else + asic = ASIC_CRONUSLITE; + + pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, " + "chipversion=0x%08X\n", + (asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE", + chipversion); + break; + } + case FAMILY_4600VZA: + platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; + asic = ASIC_CRONUS; + asic_phy_base = CRONUS_IO_BASE; + register_map = &cronus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = non_dvr_cronus_resources; + + pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n"); + break; + + case FAMILY_8500: + case FAMILY_8500RNG: + platform_features = DVR_CAPABLE | PCIE_CAPABLE | + DISPLAY_CAPABLE; + asic = ASIC_ZEUS; + asic_phy_base = ZEUS_IO_BASE; + register_map = &zeus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = dvr_zeus_resources; + + pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n"); + break; + + case FAMILY_8600: + case FAMILY_8600VZB: + platform_features = DVR_CAPABLE | PCIE_CAPABLE | + DISPLAY_CAPABLE; + asic = ASIC_CRONUS; + asic_phy_base = CRONUS_IO_BASE; + register_map = &cronus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = dvr_cronus_resources; + + pr_info("Platform: 8600/Vz Class B - CRONUS, " + "DVR_CAPABLE\n"); + break; + + default: + pr_crit("Platform: UNKNOWN PLATFORM\n"); + break; + } + + switch (asic) { + case ASIC_ZEUS: + phys_to_bus_offset = 0x30000000; + break; + case ASIC_CALLIOPE: + phys_to_bus_offset = 0x10000000; + break; + case ASIC_CRONUSLITE: + /* Fall through */ + case ASIC_CRONUS: + /* + * TODO: We suppose 0x10000000 aliases into 0x20000000- + * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000- + * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000. + */ + phys_to_bus_offset = 0x10000000; + break; + default: + phys_to_bus_offset = 0x00000000; + break; + } +} + +/** + * platform_devices_init - sets up USB device resourse. + */ +static int __init platform_devices_init(void) +{ + pr_notice("%s: ----- Initializing USB resources -----\n", __func__); + + asic_resource.start = asic_phy_base; + asic_resource.end += asic_resource.start; + + ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase); + ehci_resources[0].end += ehci_resources[0].start; + + ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision); + ohci_resources[0].end += ohci_resources[0].start; + + set_io_port_base(0); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + return 0; +} + +arch_initcall(platform_devices_init); + +/* + * + * BOOTMEM ALLOCATION + * + */ +/* + * Allocates/reserves the Platform memory resources early in the boot process. + * This ignores any resources that are designated IORESOURCE_IO + */ +void __init platform_alloc_bootmem(void) +{ + int i; + int total = 0; + + /* Get persistent memory data from command line before allocating + * resources. This need to happen before normal command line parsing + * has been done */ + pmem_setup_resource(); + + /* Loop through looking for resources that want a particular address */ + for (i = 0; gp_resources[i].flags != 0; i++) { + int size = gp_resources[i].end - gp_resources[i].start + 1; + if ((gp_resources[i].start != 0) && + ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { + reserve_bootmem(bus_to_phys(gp_resources[i].start), + size, 0); + total += gp_resources[i].end - + gp_resources[i].start + 1; + pr_info("reserve resource %s at %08x (%u bytes)\n", + gp_resources[i].name, gp_resources[i].start, + gp_resources[i].end - + gp_resources[i].start + 1); + } + } + + /* Loop through assigning addresses for those that are left */ + for (i = 0; gp_resources[i].flags != 0; i++) { + int size = gp_resources[i].end - gp_resources[i].start + 1; + if ((gp_resources[i].start == 0) && + ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { + void *mem = alloc_bootmem_pages(size); + + if (mem == NULL) + pr_err("Unable to allocate bootmem pages " + "for %s\n", gp_resources[i].name); + + else { + gp_resources[i].start = + phys_to_bus(virt_to_phys(mem)); + gp_resources[i].end = + gp_resources[i].start + size - 1; + total += size; + pr_info("allocate resource %s at %08x " + "(%u bytes)\n", + gp_resources[i].name, + gp_resources[i].start, size); + } + } + } + + pr_info("Total Platform driver memory allocation: 0x%08x\n", total); + + /* indicate resources that are platform I/O related */ + for (i = 0; gp_resources[i].flags != 0; i++) { + if ((gp_resources[i].start != 0) && + ((gp_resources[i].flags & IORESOURCE_IO) != 0)) { + pr_info("reserved platform resource %s at %08x\n", + gp_resources[i].name, gp_resources[i].start); + } + } +} + +/* + * + * PERSISTENT MEMORY (PMEM) CONFIGURATION + * + */ +static unsigned long pmemaddr __initdata; + +static int __init early_param_pmemaddr(char *p) +{ + pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0); + return 0; +} +early_param("pmemaddr", early_param_pmemaddr); + +static long pmemlen __initdata; + +static int __init early_param_pmemlen(char *p) +{ +/* TODO: we can use this code when and if the bootloader ever changes this */ +#if 0 + pmemlen = (unsigned long)simple_strtoul(p, NULL, 0); +#else + pmemlen = 0x20000; +#endif + return 0; +} +early_param("pmemlen", early_param_pmemlen); + +/* + * Set up persistent memory. If we were given values, we patch the array of + * resources. Otherwise, persistent memory may be allocated anywhere at all. + */ +static void __init pmem_setup_resource(void) +{ + struct resource *resource; + resource = asic_resource_get("DiagPersistentMemory"); + + if (resource && pmemaddr && pmemlen) { + /* The address provided by bootloader is in kseg0. Convert to + * a bus address. */ + resource->start = phys_to_bus(pmemaddr - 0x80000000); + resource->end = resource->start + pmemlen - 1; + + pr_info("persistent memory: start=0x%x end=0x%x\n", + resource->start, resource->end); + } +} + +/* + * + * RESOURCE ACCESS FUNCTIONS + * + */ + +/** + * asic_resource_get - retrieves parameters for a platform resource. + * @name: string to match resource + * + * Returns a pointer to a struct resource corresponding to the given name. + * + * CANNOT BE NAMED platform_resource_get, which would be the obvious choice, + * as this function name is already declared + */ +struct resource *asic_resource_get(const char *name) +{ + int i; + + for (i = 0; gp_resources[i].flags != 0; i++) { + if (strcmp(gp_resources[i].name, name) == 0) + return &gp_resources[i]; + } + + return NULL; +} +EXPORT_SYMBOL(asic_resource_get); + +/** + * platform_release_memory - release pre-allocated memory + * @ptr: pointer to memory to release + * @size: size of resource + * + * This must only be called for memory allocated or reserved via the boot + * memory allocator. + */ +void platform_release_memory(void *ptr, int size) +{ + unsigned long addr; + unsigned long end; + + addr = ((unsigned long)ptr + (PAGE_SIZE - 1)) & PAGE_MASK; + end = ((unsigned long)ptr + size) & PAGE_MASK; + + for (; addr < end; addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(__va(addr))); + init_page_count(virt_to_page(__va(addr))); + free_page((unsigned long)__va(addr)); + } +} +EXPORT_SYMBOL(platform_release_memory); + +/* + * + * FEATURE AVAILABILITY FUNCTIONS + * + */ +int platform_supports_dvr(void) +{ + return (platform_features & DVR_CAPABLE) != 0; +} + +int platform_supports_ffs(void) +{ + return (platform_features & FFS_CAPABLE) != 0; +} + +int platform_supports_pcie(void) +{ + return (platform_features & PCIE_CAPABLE) != 0; +} + +int platform_supports_display(void) +{ + return (platform_features & DISPLAY_CAPABLE) != 0; +} diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c new file mode 100644 index 00000000000..80b2eed21ac --- /dev/null +++ b/arch/mips/powertv/asic/asic_int.c @@ -0,0 +1,125 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. + * Copyright (C) 2001 Ralf Baechle + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Routines for generic manipulation of the interrupts found on the PowerTV + * platform. + * + * The interrupt controller is located in the South Bridge a PIIX4 device + * with two internal 82C95 interrupt controllers. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/kernel.h> +#include <linux/random.h> + +#include <asm/irq_cpu.h> +#include <linux/io.h> +#include <asm/irq_regs.h> +#include <asm/mips-boards/generic.h> + +#include <asm/mach-powertv/asic_regs.h> + +static DEFINE_SPINLOCK(asic_irq_lock); + +static inline int get_int(void) +{ + unsigned long flags; + int irq; + + spin_lock_irqsave(&asic_irq_lock, flags); + + irq = (asic_read(int_int_scan) >> 4) - 1; + + if (irq == 0 || irq >= NR_IRQS) + irq = -1; + + spin_unlock_irqrestore(&asic_irq_lock, flags); + + return irq; +} + +static void asic_irqdispatch(void) +{ + int irq; + + irq = get_int(); + if (irq < 0) + return; /* interrupt has already been cleared */ + + do_IRQ(irq); +} + +static inline int clz(unsigned long x) +{ + __asm__( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ + return fls(pending) - 1 + CAUSEB_IP; +} + +/* + * TODO: check how it works under EIC mode. + */ +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq == CAUSEF_IP3) + asic_irqdispatch(); + else if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + int i; + + asic_irq_init(); + + /* + * Initialize interrupt exception vectors. + */ + if (cpu_has_veic || cpu_has_vint) { + int nvec = cpu_has_veic ? 64 : 8; + for (i = 0; i < nvec; i++) + set_vi_handler(i, asic_irqdispatch); + } +} diff --git a/arch/mips/powertv/asic/irq_asic.c b/arch/mips/powertv/asic/irq_asic.c new file mode 100644 index 00000000000..b54d24499b0 --- /dev/null +++ b/arch/mips/powertv/asic/irq_asic.c @@ -0,0 +1,116 @@ +/* + * Portions copyright (C) 2005-2009 Scientific Atlanta + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * Modified from arch/mips/kernel/irq-rm7000.c: + * Copyright (C) 2003 Ralf Baechle + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> +#include <asm/system.h> + +#include <asm/mach-powertv/asic_regs.h> + +static inline void unmask_asic_irq(unsigned int irq) +{ + unsigned long enable_bit; + + enable_bit = (1 << (irq & 0x1f)); + + switch (irq >> 5) { + case 0: + asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0); + break; + case 1: + asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1); + break; + case 2: + asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2); + break; + case 3: + asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3); + break; + default: + BUG(); + } +} + +static inline void mask_asic_irq(unsigned int irq) +{ + unsigned long disable_mask; + + disable_mask = ~(1 << (irq & 0x1f)); + + switch (irq >> 5) { + case 0: + asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0); + break; + case 1: + asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1); + break; + case 2: + asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2); + break; + case 3: + asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3); + break; + default: + BUG(); + } +} + +static struct irq_chip asic_irq_chip = { + .name = "ASIC Level", + .ack = mask_asic_irq, + .mask = mask_asic_irq, + .mask_ack = mask_asic_irq, + .unmask = unmask_asic_irq, + .eoi = unmask_asic_irq, +}; + +void __init asic_irq_init(void) +{ + int i; + + /* set priority to 0 */ + write_c0_status(read_c0_status() & ~(0x0000fc00)); + + asic_write(0, ien_int_0); + asic_write(0, ien_int_1); + asic_write(0, ien_int_2); + asic_write(0, ien_int_3); + + asic_write(0x0fffffff, int_level_3_3); + asic_write(0xffffffff, int_level_3_2); + asic_write(0xffffffff, int_level_3_1); + asic_write(0xffffffff, int_level_3_0); + asic_write(0xffffffff, int_level_2_3); + asic_write(0xffffffff, int_level_2_2); + asic_write(0xffffffff, int_level_2_1); + asic_write(0xffffffff, int_level_2_0); + asic_write(0xffffffff, int_level_1_3); + asic_write(0xffffffff, int_level_1_2); + asic_write(0xffffffff, int_level_1_1); + asic_write(0xffffffff, int_level_1_0); + asic_write(0xffffffff, int_level_0_3); + asic_write(0xffffffff, int_level_0_2); + asic_write(0xffffffff, int_level_0_1); + asic_write(0xffffffff, int_level_0_0); + + asic_write(0xf, int_int_scan); + + /* + * Initialize interrupt handlers. + */ + for (i = 0; i < NR_IRQS; i++) + set_irq_chip_and_handler(i, &asic_irq_chip, handle_level_irq); +} diff --git a/arch/mips/powertv/asic/prealloc-calliope.c b/arch/mips/powertv/asic/prealloc-calliope.c new file mode 100644 index 00000000000..cd5b76a1c95 --- /dev/null +++ b/arch/mips/powertv/asic/prealloc-calliope.c @@ -0,0 +1,620 @@ +/* + * Memory pre-allocations for Calliope boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> + */ + +#include <linux/init.h> +#include <asm/mach-powertv/asic.h> + +/* + * NON_DVR_CAPABLE CALLIOPE RESOURCES + */ +struct resource non_dvr_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x24200000 - 1, /*2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /*8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x26700000 - 1, /*~36.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00600000 - 1, /* 6 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * DOCSIS Subsystem + */ + { + .name = "Docsis", + .start = 0x22000000, + .end = 0x22700000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x22700000, + .end = 0x23500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x23700000, + .end = 0x23720000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer (don't need recording buffers) + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + .end = 0x002c4c00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + * + */ + { }, +}; + +struct resource non_dvr_vz_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x24200000 - 1, /*2 Meg */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8k block ST231a monitor */ + .start = 0x24200000, + .end = 0x24202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x22202000, + .end = 0x22C20B85 - 1, /* 10.12 Meg */ + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x20300000, + .end = 0x20620000-1, /*3.125 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x20100000, + .end = 0x20300000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x23900000, + .end = 0x23920000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE+0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; + +struct resource non_dvr_vze_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x22000000, + .end = 0x22200000 - 1, /*2 Meg */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8k block ST231a monitor */ + .start = 0x22200000, + .end = 0x22202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x22202000, + .end = 0x22C20B85 - 1, /* 10.12 Meg */ + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x20396000, + .end = 0x206B6000 - 1, /* 3.125 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x20100000, + .end = 0x20396000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x206B6000, + .end = 0x206D6000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE+0x400 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; + +struct resource non_dvr_vzf_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /*Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x24200000 - 1, /*2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /*8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + /* ~19.4 (21.5MiB - (2MiB + 8KiB)) */ + .end = 0x25580000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00480000 - 1, /* 4.5 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x22700000, + .end = 0x23500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x23700000, + .end = 0x23720000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer (don't need recording buffers) + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit1 + */ + { + .name = "DisplayBins1", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + .end = 0x002c4c00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; diff --git a/arch/mips/powertv/asic/prealloc-cronus.c b/arch/mips/powertv/asic/prealloc-cronus.c new file mode 100644 index 00000000000..45a5c3ea718 --- /dev/null +++ b/arch/mips/powertv/asic/prealloc-cronus.c @@ -0,0 +1,608 @@ +/* + * Memory pre-allocations for Cronus boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> + */ + +#include <linux/init.h> +#include <asm/mach-powertv/asic.h> + +/* + * DVR_CAPABLE CRONUS RESOURCES + */ +struct resource dvr_cronus_resources[] __initdata = +{ + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x241FFFFF, /* 2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24201FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x64180000 - 1, /* 12 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x64AD4000, + .end = 0x64AD5000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * ITFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "ITFS", + .start = 0x64180000, + /* 815,104 bytes each for 2 ITFS partitions. */ + .end = 0x6430DFFF, + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "AvfsDmaMem", + .start = 0x6430E000, + /* (945K * 8) = (128K *3) 5 playbacks / 3 server */ + .end = 0x64AD0000 - 1, + .flags = IORESOURCE_IO, + }, + { + .name = "AvfsFileSys", + .start = 0x64AD0000, + .end = 0x64AD1000 - 1, /* 4K */ + .flags = IORESOURCE_IO, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x64AD1000, + .end = 0x64AD3800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Add other resources here + */ + { }, +}; + +/* + * NON_DVR_CAPABLE CRONUS RESOURCES + */ +struct resource non_dvr_cronus_resources[] __initdata = +{ + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x241FFFFF, /* 2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24201FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x64180000 - 1, /* 12 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x64AD4000, + .end = 0x64AD5000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x6430E000, + .end = 0x645D2C00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_IO, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x64AD1000, + .end = 0x64AD3800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + { }, +}; diff --git a/arch/mips/powertv/asic/prealloc-cronuslite.c b/arch/mips/powertv/asic/prealloc-cronuslite.c new file mode 100644 index 00000000000..23a905613c0 --- /dev/null +++ b/arch/mips/powertv/asic/prealloc-cronuslite.c @@ -0,0 +1,290 @@ +/* + * Memory pre-allocations for Cronus Lite boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> + */ + +#include <linux/init.h> +#include <asm/mach-powertv/asic.h> + +/* + * NON_DVR_CAPABLE CRONUSLITE RESOURCES + */ +struct resource non_dvr_cronuslite_resources[] __initdata = +{ + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory1", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x63B80000 - 1, /* 6 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x63B83000, + .end = 0x63B84000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x63B84000, + .end = 0x63E48C00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_IO, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x63B80000, + .end = 0x63B82800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Add other resources here + */ + { }, +}; diff --git a/arch/mips/powertv/asic/prealloc-zeus.c b/arch/mips/powertv/asic/prealloc-zeus.c new file mode 100644 index 00000000000..018d4514dbe --- /dev/null +++ b/arch/mips/powertv/asic/prealloc-zeus.c @@ -0,0 +1,459 @@ +/* + * Memory pre-allocations for Zeus boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> + */ + +#include <linux/init.h> +#include <asm/mach-powertv/asic.h> + +/* + * DVR_CAPABLE RESOURCES + */ +struct resource dvr_zeus_resources[] __initdata = +{ + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x20000000, + .end = 0x201FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x20200000, + .end = 0x20201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory1", + .start = 0x20202000, + .end = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x30000000, + .end = 0x301FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x30200000, + .end = 0x30201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x30202000, + .end = 0x31FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00c00000 - 1, /* 12 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x40100000, + .end = 0x407fffff, + .flags = IORESOURCE_MEM, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x46900000, + .end = 0x47700000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x47900000, + .end = 0x47920000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * ITFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "ITFS", + .start = 0x00000000, + /* 815,104 bytes each for 2 ITFS partitions. */ + .end = 0x0018DFFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + /* (945K * 8) = (128K * 3) 5 playbacks / 3 server */ + .end = 0x007c2000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "AvfsFileSys", + .start = 0x00000000, + .end = 0x00001000 - 1, /* 4K */ + .flags = IORESOURCE_MEM, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; + +/* + * NON_DVR_CAPABLE ZEUS RESOURCES + */ +struct resource non_dvr_zeus_resources[] __initdata = +{ + /* + * VIDEO1 / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x20000000, + .end = 0x201FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x20200000, + .end = 0x20201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory1", + .start = 0x20202000, + .end = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00600000 - 1, /* 6 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * DOCSIS Subsystem + */ + { + .name = "Docsis", + .start = 0x40100000, + .end = 0x407fffff, + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x46900000, + .end = 0x47700000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x47900000, + .end = 0x47920000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + .end = 0x002c4c00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Add other resources here + */ + { }, +}; diff --git a/arch/mips/powertv/cmdline.c b/arch/mips/powertv/cmdline.c new file mode 100644 index 00000000000..98d73cb0d45 --- /dev/null +++ b/arch/mips/powertv/cmdline.c @@ -0,0 +1,52 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Kernel command line creation using the prom monitor (YAMON) argc/argv. + */ +#include <linux/init.h> +#include <linux/string.h> + +#include <asm/bootinfo.h> + +#include "init.h" + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension. + */ +#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +void __init prom_init_cmdline(void) +{ + int len; + + if (prom_argc != 1) + return; + + len = strlen(arcs_cmdline); + + arcs_cmdline[len] = ' '; + + strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv, + COMMAND_LINE_SIZE - len - 1); +} diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c new file mode 100644 index 00000000000..5f4e4c304e4 --- /dev/null +++ b/arch/mips/powertv/init.c @@ -0,0 +1,128 @@ +/* + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard <carstenl@mips.com> + * Maciej W. Rozycki <macro@mips.com> + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * PROM library initialisation code. + */ +#include <linux/init.h> +#include <linux/string.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> +#include <linux/io.h> +#include <asm/system.h> +#include <asm/cacheflush.h> +#include <asm/traps.h> + +#include <asm/mips-boards/prom.h> +#include <asm/mips-boards/generic.h> +#include <asm/mach-powertv/asic.h> + +#include "init.h" + +int prom_argc; +int *_prom_argv, *_prom_envp; +unsigned long _prom_memsize; + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension, if running in 64-bit mode. + */ +#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) + +char *prom_getenv(char *envname) +{ + char *result = NULL; + + if (_prom_envp != NULL) { + /* + * Return a pointer to the given environment variable. + * In 64-bit mode: we're using 64-bit pointers, but all pointers + * in the PROM structures are only 32-bit, so we need some + * workarounds, if we are running in 64-bit mode. + */ + int i, index = 0; + + i = strlen(envname); + + while (prom_envp(index)) { + if (strncmp(envname, prom_envp(index), i) == 0) { + result = prom_envp(index + 1); + break; + } + index += 2; + } + } + + return result; +} + +/* TODO: Verify on linux-mips mailing list that the following two */ +/* functions are correct */ +/* TODO: Copy NMI and EJTAG exception vectors to memory from the */ +/* BootROM exception vectors. Flush their cache entries. test it. */ + +static void __init mips_nmi_setup(void) +{ + void *base; +#if defined(CONFIG_CPU_MIPS32_R1) + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa80) : + (void *)(CAC_BASE + 0x380); +#elif defined(CONFIG_CPU_MIPS32_R2) + base = (void *)0xbfc00000; +#else +#error NMI exception handler address not defined +#endif +} + +static void __init mips_ejtag_setup(void) +{ + void *base; + +#if defined(CONFIG_CPU_MIPS32_R1) + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa00) : + (void *)(CAC_BASE + 0x300); +#elif defined(CONFIG_CPU_MIPS32_R2) + base = (void *)0xbfc00480; +#else +#error EJTAG exception handler address not defined +#endif +} + +void __init prom_init(void) +{ + prom_argc = fw_arg0; + _prom_argv = (int *) fw_arg1; + _prom_envp = (int *) fw_arg2; + _prom_memsize = (unsigned long) fw_arg3; + + board_nmi_handler_setup = mips_nmi_setup; + board_ejtag_handler_setup = mips_ejtag_setup; + + pr_info("\nLINUX started...\n"); + prom_init_cmdline(); + configure_platform(); + prom_meminit(); + +#ifndef CONFIG_BOOTLOADER_DRIVER + pr_info("\nBootloader driver isn't loaded...\n"); +#endif +} diff --git a/arch/mips/powertv/init.h b/arch/mips/powertv/init.h new file mode 100644 index 00000000000..7af6bf25008 --- /dev/null +++ b/arch/mips/powertv/init.h @@ -0,0 +1,28 @@ +/* + * Definitions from powertv init.c file + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#ifndef _POWERTV_INIT_H +#define _POWERTV_INIT_H +extern int prom_argc; +extern int *_prom_argv; +extern unsigned long _prom_memsize; +#endif diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c new file mode 100644 index 00000000000..28d06605fff --- /dev/null +++ b/arch/mips/powertv/memory.c @@ -0,0 +1,186 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Apparently originally from arch/mips/malta-memory.c. Modified to work + * with the PowerTV bootloader. + */ +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/bootmem.h> +#include <linux/pfn.h> +#include <linux/string.h> + +#include <asm/bootinfo.h> +#include <asm/page.h> +#include <asm/sections.h> + +#include <asm/mips-boards/prom.h> + +#include "init.h" + +/* Memory constants */ +#define KIBIBYTE(n) ((n) * 1024) /* Number of kibibytes */ +#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */ +#define DEFAULT_MEMSIZE MEBIBYTE(256) /* If no memsize provided */ +#define LOW_MEM_MAX MEBIBYTE(252) /* Max usable low mem */ +#define RES_BOOTLDR_MEMSIZE MEBIBYTE(1) /* Memory reserved for bldr */ +#define BOOT_MEM_SIZE KIBIBYTE(256) /* Memory reserved for bldr */ +#define PHYS_MEM_START 0x10000000 /* Start of physical memory */ + +unsigned long ptv_memsize; + +char __initdata cmdline[COMMAND_LINE_SIZE]; + +void __init prom_meminit(void) +{ + char *memsize_str; + unsigned long memsize = 0; + unsigned int physend; + char *ptr; + int low_mem; + int high_mem; + + /* Check the command line first for a memsize directive */ + strcpy(cmdline, arcs_cmdline); + ptr = strstr(cmdline, "memsize="); + if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) + ptr = strstr(ptr, " memsize="); + + if (ptr) { + memsize = memparse(ptr + 8, &ptr); + } else { + /* otherwise look in the environment */ + memsize_str = prom_getenv("memsize"); + + if (memsize_str != NULL) { + pr_info("prom memsize = %s\n", memsize_str); + memsize = simple_strtol(memsize_str, NULL, 0); + } + + if (memsize == 0) { + if (_prom_memsize != 0) { + memsize = _prom_memsize; + pr_info("_prom_memsize = 0x%lx\n", memsize); + /* add in memory that the bootloader doesn't + * report */ + memsize += BOOT_MEM_SIZE; + } else { + memsize = DEFAULT_MEMSIZE; + pr_info("Memsize not passed by bootloader, " + "defaulting to 0x%lx\n", memsize); + } + } + } + + /* Store memsize for diagnostic purposes */ + ptv_memsize = memsize; + + physend = PFN_ALIGN(&_end) - 0x80000000; + if (memsize > LOW_MEM_MAX) { + low_mem = LOW_MEM_MAX; + high_mem = memsize - low_mem; + } else { + low_mem = memsize; + high_mem = 0; + } + +/* + * TODO: We will use the hard code for memory configuration until + * the bootloader releases their device tree to us. + */ + /* + * Add the memory reserved for use by the bootloader to the + * memory map. + */ + add_memory_region(PHYS_MEM_START, RES_BOOTLDR_MEMSIZE, + BOOT_MEM_RESERVED); +#ifdef CONFIG_HIGHMEM_256_128 + /* + * Add memory in low for general use by the kernel and its friends + * (like drivers, applications, etc). + */ + add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, + LOW_MEM_MAX - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); + /* + * Add the memory reserved for reset vector. + */ + add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED); + /* + * Add the memory reserved. + */ + add_memory_region(0x20000000, MEBIBYTE(1024 + 75), BOOT_MEM_RESERVED); + /* + * Add memory in high for general use by the kernel and its friends + * (like drivers, applications, etc). + * + * 75MB is reserved for devices which are using the memory in high. + */ + add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75), + BOOT_MEM_RAM); +#elif defined CONFIG_HIGHMEM_128_128 + /* + * Add memory in low for general use by the kernel and its friends + * (like drivers, applications, etc). + */ + add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, + MEBIBYTE(128) - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); + /* + * Add the memory reserved. + */ + add_memory_region(PHYS_MEM_START + MEBIBYTE(128), + MEBIBYTE(128 + 1024 + 75), BOOT_MEM_RESERVED); + /* + * Add memory in high for general use by the kernel and its friends + * (like drivers, applications, etc). + * + * 75MB is reserved for devices which are using the memory in high. + */ + add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75), + BOOT_MEM_RAM); +#else + /* Add low memory regions for either: + * - no-highmemory configuration case -OR- + * - highmemory "HIGHMEM_LOWBANK_ONLY" case + */ + /* + * Add memory for general use by the kernel and its friends + * (like drivers, applications, etc). + */ + add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, + low_mem - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); + /* + * Add the memory reserved for reset vector. + */ + add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED); +#endif +} + +void __init prom_free_prom_memory(void) +{ + unsigned long addr; + int i; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) + continue; + + addr = boot_mem_map.map[i].addr; + free_init_pages("prom memory", + addr, addr + boot_mem_map.map[i].size); + } +} diff --git a/arch/mips/powertv/pci/Makefile b/arch/mips/powertv/pci/Makefile new file mode 100644 index 00000000000..f5c62462fc9 --- /dev/null +++ b/arch/mips/powertv/pci/Makefile @@ -0,0 +1,21 @@ +# +# Copyright (C) 2009 Scientific-Atlanta, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +obj-$(CONFIG_PCI) += fixup-powertv.o + +EXTRA_CFLAGS += -Wall -Werror diff --git a/arch/mips/powertv/pci/fixup-powertv.c b/arch/mips/powertv/pci/fixup-powertv.c new file mode 100644 index 00000000000..726bc2e824b --- /dev/null +++ b/arch/mips/powertv/pci/fixup-powertv.c @@ -0,0 +1,36 @@ +#include <linux/init.h> +#include <linux/pci.h> +#include <asm/mach-powertv/interrupts.h> +#include "powertv-pci.h" + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return asic_pcie_map_irq(dev, slot, pin); +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +/* + * asic_pcie_map_irq + * + * Parameters: + * *dev - pointer to a pci_dev structure (not used) + * slot - slot number (not used) + * pin - pin number (not used) + * + * Return Value: + * Returns: IRQ number (always the PCI Express IRQ number) + * + * Description: + * asic_pcie_map_irq will return the IRQ number of the PCI Express interrupt. + * + */ +int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return irq_pciexp; +} +EXPORT_SYMBOL(asic_pcie_map_irq); diff --git a/arch/mips/powertv/pci/powertv-pci.h b/arch/mips/powertv/pci/powertv-pci.h new file mode 100644 index 00000000000..1b5886bbd75 --- /dev/null +++ b/arch/mips/powertv/pci/powertv-pci.h @@ -0,0 +1,31 @@ +/* + * powertv-pci.c + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +/* + * Local definitions for the powertv PCI code + */ + +#ifndef _POWERTV_PCI_POWERTV_PCI_H_ +#define _POWERTV_PCI_POWERTV_PCI_H_ +extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +extern int asic_pcie_init(void); +extern int asic_pcie_init(void); + +extern int log_level; +#endif diff --git a/arch/mips/powertv/powertv-clock.h b/arch/mips/powertv/powertv-clock.h new file mode 100644 index 00000000000..d94c5431148 --- /dev/null +++ b/arch/mips/powertv/powertv-clock.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#ifndef _POWERTV_POWERTV_CLOCK_H +#define _POWERTV_POWERTV_CLOCK_H +extern int powertv_clockevent_init(void); +extern void powertv_clocksource_init(void); +extern unsigned int mips_get_pll_freq(void); +#endif diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c new file mode 100644 index 00000000000..bd8ebf128f2 --- /dev/null +++ b/arch/mips/powertv/powertv_setup.c @@ -0,0 +1,351 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/screen_info.h> +#include <linux/notifier.h> +#include <linux/etherdevice.h> +#include <linux/if_ether.h> +#include <linux/ctype.h> + +#include <linux/cpu.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/mips-boards/generic.h> +#include <asm/mips-boards/prom.h> +#include <asm/dma.h> +#include <linux/time.h> +#include <asm/traps.h> +#include <asm/asm-offsets.h> +#include "reset.h" + +#define VAL(n) STR(n) + +/* + * Macros for loading addresses and storing registers: + * PTR_LA Load the address into a register + * LONG_S Store the full width of the given register. + * LONG_L Load the full width of the given register + * PTR_ADDIU Add a constant value to a register used as a pointer + * REG_SIZE Number of 8-bit bytes in a full width register + */ +#ifdef CONFIG_64BIT +#warning TODO: 64-bit code needs to be verified +#define PTR_LA "dla " +#define LONG_S "sd " +#define LONG_L "ld " +#define PTR_ADDIU "daddiu " +#define REG_SIZE "8" /* In bytes */ +#endif + +#ifdef CONFIG_32BIT +#define PTR_LA "la " +#define LONG_S "sw " +#define LONG_L "lw " +#define PTR_ADDIU "addiu " +#define REG_SIZE "4" /* In bytes */ +#endif + +static struct pt_regs die_regs; +static bool have_die_regs; + +static void register_panic_notifier(void); +static int panic_handler(struct notifier_block *notifier_block, + unsigned long event, void *cause_string); + +const char *get_system_type(void) +{ + return "PowerTV"; +} + +void __init plat_mem_setup(void) +{ + panic_on_oops = 1; + register_panic_notifier(); + +#if 0 + mips_pcibios_init(); +#endif + mips_reboot_setup(); +} + +/* + * Install a panic notifier for platform-specific diagnostics + */ +static void register_panic_notifier() +{ + static struct notifier_block panic_notifier = { + .notifier_call = panic_handler, + .next = NULL, + .priority = INT_MAX + }; + atomic_notifier_chain_register(&panic_notifier_list, &panic_notifier); +} + +static int panic_handler(struct notifier_block *notifier_block, + unsigned long event, void *cause_string) +{ + struct pt_regs my_regs; + + /* Save all of the registers */ + { + unsigned long at, v0, v1; /* Must be on the stack */ + + /* Start by saving $at and v0 on the stack. We use $at + * ourselves, but it looks like the compiler may use v0 or v1 + * to load the address of the pt_regs structure. We'll come + * back later to store the registers in the pt_regs + * structure. */ + __asm__ __volatile__ ( + ".set noat\n" + LONG_S "$at, %[at]\n" + LONG_S "$2, %[v0]\n" + LONG_S "$3, %[v1]\n" + : + [at] "=m" (at), + [v0] "=m" (v0), + [v1] "=m" (v1) + : + : "at" + ); + + __asm__ __volatile__ ( + ".set noat\n" + "move $at, %[pt_regs]\n" + + /* Argument registers */ + LONG_S "$4, " VAL(PT_R4) "($at)\n" + LONG_S "$5, " VAL(PT_R5) "($at)\n" + LONG_S "$6, " VAL(PT_R6) "($at)\n" + LONG_S "$7, " VAL(PT_R7) "($at)\n" + + /* Temporary regs */ + LONG_S "$8, " VAL(PT_R8) "($at)\n" + LONG_S "$9, " VAL(PT_R9) "($at)\n" + LONG_S "$10, " VAL(PT_R10) "($at)\n" + LONG_S "$11, " VAL(PT_R11) "($at)\n" + LONG_S "$12, " VAL(PT_R12) "($at)\n" + LONG_S "$13, " VAL(PT_R13) "($at)\n" + LONG_S "$14, " VAL(PT_R14) "($at)\n" + LONG_S "$15, " VAL(PT_R15) "($at)\n" + + /* "Saved" registers */ + LONG_S "$16, " VAL(PT_R16) "($at)\n" + LONG_S "$17, " VAL(PT_R17) "($at)\n" + LONG_S "$18, " VAL(PT_R18) "($at)\n" + LONG_S "$19, " VAL(PT_R19) "($at)\n" + LONG_S "$20, " VAL(PT_R20) "($at)\n" + LONG_S "$21, " VAL(PT_R21) "($at)\n" + LONG_S "$22, " VAL(PT_R22) "($at)\n" + LONG_S "$23, " VAL(PT_R23) "($at)\n" + + /* Add'l temp regs */ + LONG_S "$24, " VAL(PT_R24) "($at)\n" + LONG_S "$25, " VAL(PT_R25) "($at)\n" + + /* Kernel temp regs */ + LONG_S "$26, " VAL(PT_R26) "($at)\n" + LONG_S "$27, " VAL(PT_R27) "($at)\n" + + /* Global pointer, stack pointer, frame pointer and + * return address */ + LONG_S "$gp, " VAL(PT_R28) "($at)\n" + LONG_S "$sp, " VAL(PT_R29) "($at)\n" + LONG_S "$fp, " VAL(PT_R30) "($at)\n" + LONG_S "$ra, " VAL(PT_R31) "($at)\n" + + /* Now we can get the $at and v0 registers back and + * store them */ + LONG_L "$8, %[at]\n" + LONG_S "$8, " VAL(PT_R1) "($at)\n" + LONG_L "$8, %[v0]\n" + LONG_S "$8, " VAL(PT_R2) "($at)\n" + LONG_L "$8, %[v1]\n" + LONG_S "$8, " VAL(PT_R3) "($at)\n" + : + : + [at] "m" (at), + [v0] "m" (v0), + [v1] "m" (v1), + [pt_regs] "r" (&my_regs) + : "at", "t0" + ); + + /* Set the current EPC value to be the current location in this + * function */ + __asm__ __volatile__ ( + ".set noat\n" + "1:\n" + PTR_LA "$at, 1b\n" + LONG_S "$at, %[cp0_epc]\n" + : + [cp0_epc] "=m" (my_regs.cp0_epc) + : + : "at" + ); + + my_regs.cp0_cause = read_c0_cause(); + my_regs.cp0_status = read_c0_status(); + } + +#ifdef CONFIG_DIAGNOSTICS + failure_report((char *) cause_string, + have_die_regs ? &die_regs : &my_regs); + have_die_regs = false; +#else + pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... " + "zzzz... \n"); +#endif + + return NOTIFY_DONE; +} + +/** + * Platform-specific handling of oops + * @str: Pointer to the oops string + * @regs: Pointer to the oops registers + * All we do here is to save the registers for subsequent printing through + * the panic notifier. + */ +void platform_die(const char *str, const struct pt_regs *regs) +{ + /* If we already have saved registers, don't overwrite them as they + * they apply to the initial fault */ + + if (!have_die_regs) { + have_die_regs = true; + die_regs = *regs; + } +} + +/* Information about the RF MAC address, if one was supplied on the + * command line. */ +static bool have_rfmac; +static u8 rfmac[ETH_ALEN]; + +static int rfmac_param(char *p) +{ + u8 *q; + bool is_high_nibble; + int c; + + /* Skip a leading "0x", if present */ + if (*p == '0' && *(p+1) == 'x') + p += 2; + + q = rfmac; + is_high_nibble = true; + + for (c = (unsigned char) *p++; + isxdigit(c) && q - rfmac < ETH_ALEN; + c = (unsigned char) *p++) { + int nibble; + + nibble = (isdigit(c) ? (c - '0') : + (isupper(c) ? c - 'A' + 10 : c - 'a' + 10)); + + if (is_high_nibble) + *q = nibble << 4; + else + *q++ |= nibble; + + is_high_nibble = !is_high_nibble; + } + + /* If we parsed all the way to the end of the parameter value and + * parsed all ETH_ALEN bytes, we have a usable RF MAC address */ + have_rfmac = (c == '\0' && q - rfmac == ETH_ALEN); + + return 0; +} + +early_param("rfmac", rfmac_param); + +/* + * Generate an Ethernet MAC address that has a good chance of being unique. + * @addr: Pointer to six-byte array containing the Ethernet address + * Generates an Ethernet MAC address that is highly likely to be unique for + * this particular system on a network with other systems of the same type. + * + * The problem we are solving is that, when random_ether_addr() is used to + * generate MAC addresses at startup, there isn't much entropy for the random + * number generator to use and the addresses it produces are fairly likely to + * be the same as those of other identical systems on the same local network. + * This is true even for relatively small numbers of systems (for the reason + * why, see the Wikipedia entry for "Birthday problem" at: + * http://en.wikipedia.org/wiki/Birthday_problem + * + * The good news is that we already have a MAC address known to be unique, the + * RF MAC address. The bad news is that this address is already in use on the + * RF interface. Worse, the obvious trick, taking the RF MAC address and + * turning on the locally managed bit, has already been used for other devices. + * Still, this does give us something to work with. + * + * The approach we take is: + * 1. If we can't get the RF MAC Address, just call random_ether_addr. + * 2. Use the 24-bit NIC-specific bits of the RF MAC address as the last 24 + * bits of the new address. This is very likely to be unique, except for + * the current box. + * 3. To avoid using addresses already on the current box, we set the top + * six bits of the address with a value different from any currently + * registered Scientific Atlanta organizationally unique identifyer + * (OUI). This avoids duplication with any addresses on the system that + * were generated from valid Scientific Atlanta-registered address by + * simply flipping the locally managed bit. + * 4. We aren't generating a multicast address, so we leave the multicast + * bit off. Since we aren't using a registered address, we have to set + * the locally managed bit. + * 5. We then randomly generate the remaining 16-bits. This does two + * things: + * a. It allows us to call this function for more than one device + * in this system + * b. It ensures that things will probably still work even if + * some device on the device network has a locally managed + * address that matches the top six bits from step 2. + */ +void platform_random_ether_addr(u8 addr[ETH_ALEN]) +{ + const int num_random_bytes = 2; + const unsigned char non_sciatl_oui_bits = 0xc0u; + const unsigned char mac_addr_locally_managed = (1 << 1); + + if (!have_rfmac) { + pr_warning("rfmac not available on command line; " + "generating random MAC address\n"); + random_ether_addr(addr); + } + + else { + int i; + + /* Set the first byte to something that won't match a Scientific + * Atlanta OUI, is locally managed, and isn't a multicast + * address */ + addr[0] = non_sciatl_oui_bits | mac_addr_locally_managed; + + /* Get some bytes of random address information */ + get_random_bytes(&addr[1], num_random_bytes); + + /* Copy over the NIC-specific bits of the RF MAC address */ + for (i = 1 + num_random_bytes; i < ETH_ALEN; i++) + addr[i] = rfmac[i]; + } +} diff --git a/arch/mips/powertv/reset.c b/arch/mips/powertv/reset.c new file mode 100644 index 00000000000..494c652c984 --- /dev/null +++ b/arch/mips/powertv/reset.c @@ -0,0 +1,65 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include <linux/pm.h> + +#include <linux/io.h> +#include <asm/reboot.h> /* Not included by linux/reboot.h */ + +#ifdef CONFIG_BOOTLOADER_DRIVER +#include <asm/mach-powertv/kbldr.h> +#endif + +#include <asm/mach-powertv/asic_regs.h> +#include "reset.h" + +static void mips_machine_restart(char *command); +static void mips_machine_halt(void); + +static void mips_machine_restart(char *command) +{ +#ifdef CONFIG_BOOTLOADER_DRIVER + /* + * Call the bootloader's reset function to ensure + * that persistent data is flushed before hard reset + */ + kbldr_SetCauseAndReset(); +#else + writel(0x1, asic_reg_addr(watchdog)); +#endif +} + +static void mips_machine_halt(void) +{ +#ifdef CONFIG_BOOTLOADER_DRIVER + /* + * Call the bootloader's reset function to ensure + * that persistent data is flushed before hard reset + */ + kbldr_SetCauseAndReset(); +#else + writel(0x1, asic_reg_addr(watchdog)); +#endif +} + +void mips_reboot_setup(void) +{ + _machine_restart = mips_machine_restart; + _machine_halt = mips_machine_halt; + pm_power_off = mips_machine_halt; +} diff --git a/arch/mips/powertv/reset.h b/arch/mips/powertv/reset.h new file mode 100644 index 00000000000..888fd09e262 --- /dev/null +++ b/arch/mips/powertv/reset.h @@ -0,0 +1,26 @@ +/* + * Definitions from powertv reset.c file + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#ifndef _POWERTV_POWERTV_RESET_H +#define _POWERTV_POWERTV_RESET_H +extern void mips_reboot_setup(void); +#endif diff --git a/arch/mips/mipssim/sim_cmdline.c b/arch/mips/powertv/time.c index 74240e1ce5a..1e0a5ef4c8c 100644 --- a/arch/mips/mipssim/sim_cmdline.c +++ b/arch/mips/powertv/time.c @@ -1,5 +1,7 @@ /* - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -14,19 +16,22 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * + * Setting up the clock on the MIPS boards. */ + #include <linux/init.h> -#include <linux/string.h> -#include <asm/bootinfo.h> +#include <asm/mach-powertv/interrupts.h> +#include <asm/time.h> -extern char arcs_cmdline[]; +#include "powertv-clock.h" -char * __init prom_getcmdline(void) +unsigned int __cpuinit get_c0_compare_int(void) { - return arcs_cmdline; + return irq_mips_timer; } -void __init prom_init_cmdline(void) +void __init plat_time_init(void) { - /* XXX: Get boot line from environment? */ + powertv_clocksource_init(); + r4k_clockevent_init(); } diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c index ad5bd109797..d7c26d00cfe 100644 --- a/arch/mips/rb532/prom.c +++ b/arch/mips/rb532/prom.c @@ -69,7 +69,7 @@ static inline unsigned long tag2ul(char *arg, const char *tag) void __init prom_setup_cmdline(void) { - static char cmd_line[CL_SIZE] __initdata; + static char cmd_line[COMMAND_LINE_SIZE] __initdata; char *cp, *board; int prom_argc; char **prom_argv, **prom_envp; @@ -115,7 +115,7 @@ void __init prom_setup_cmdline(void) strcpy(cp, arcs_cmdline); cp += strlen(arcs_cmdline); } - cmd_line[CL_SIZE-1] = '\0'; + cmd_line[COMMAND_LINE_SIZE - 1] = '\0'; strcpy(arcs_cmdline, cmd_line); } diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c index 1617241d273..da44ccb2082 100644 --- a/arch/mips/sgi-ip22/ip22-eisa.c +++ b/arch/mips/sgi-ip22/ip22-eisa.c @@ -50,9 +50,9 @@ static char __init *decode_eisa_sig(unsigned long addr) { - static char sig_str[EISA_SIG_LEN]; + static char sig_str[EISA_SIG_LEN] __initdata; u8 sig[4]; - u16 rev; + u16 rev; int i; for (i = 0; i < 4; i++) { diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index 0ecd5fe9486..383f11d7f44 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/interrupt.h> +#include <linux/ftrace.h> #include <asm/irq_cpu.h> #include <asm/sgi/hpc3.h> @@ -150,7 +151,7 @@ static void indy_local1_irqdispatch(void) extern void ip22_be_interrupt(int irq); -static void indy_buserror_irq(void) +static void __irq_entry indy_buserror_irq(void) { int irq = SGI_BUSERR_IRQ; diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c index b9a931358e2..5deeb68b6c9 100644 --- a/arch/mips/sgi-ip22/ip22-setup.c +++ b/arch/mips/sgi-ip22/ip22-setup.c @@ -67,7 +67,7 @@ void __init plat_mem_setup(void) cserial = ArcGetEnvironmentVariable("ConsoleOut"); if ((ctype && *ctype == 'd') || (cserial && *cserial == 's')) { - static char options[8]; + static char options[8] __initdata; char *baud = ArcGetEnvironmentVariable("dbaud"); if (baud) strcpy(options, baud); diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index c8f7d2328b2..603fc91c103 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -16,6 +16,7 @@ #include <linux/interrupt.h> #include <linux/kernel_stat.h> #include <linux/time.h> +#include <linux/ftrace.h> #include <asm/cpu.h> #include <asm/mipsregs.h> @@ -115,7 +116,7 @@ __init void plat_time_init(void) } /* Generic SGI handler for (spurious) 8254 interrupts */ -void indy_8254timer_irq(void) +void __irq_entry indy_8254timer_irq(void) { int irq = SGI_8254_0_IRQ; ULONG cnt; diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c index c5a5d4a31b4..3abd1465ec0 100644 --- a/arch/mips/sgi-ip32/ip32-setup.c +++ b/arch/mips/sgi-ip32/ip32-setup.c @@ -90,7 +90,7 @@ void __init plat_mem_setup(void) { char* con = ArcGetEnvironmentVariable("console"); if (con && *con == 'd') { - static char options[8]; + static char options[8] __initdata; char *baud = ArcGetEnvironmentVariable("dbaud"); if (baud) strcpy(options, baud); diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c index eb5396cf81b..6343011e990 100644 --- a/arch/mips/sibyte/common/cfe.c +++ b/arch/mips/sibyte/common/cfe.c @@ -287,7 +287,7 @@ void __init prom_init(void) * boot console */ cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); - if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) { + if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, COMMAND_LINE_SIZE) < 0) { if (argc >= 0) { /* The loader should have set the command line */ /* too early for panic to do any good */ @@ -318,7 +318,7 @@ void __init prom_init(void) #endif /* CONFIG_BLK_DEV_INITRD */ /* Not sure this is needed, but it's the safe way. */ - arcs_cmdline[CL_SIZE-1] = 0; + arcs_cmdline[COMMAND_LINE_SIZE-1] = 0; prom_meminit(); diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index 7dd76fb3b64..e6980892834 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -188,7 +188,7 @@ static void end_a20r_irq(unsigned int irq) } static struct irq_chip a20r_irq_type = { - .typename = "A20R", + .name = "A20R", .ack = mask_a20r_irq, .mask = mask_a20r_irq, .mask_ack = mask_a20r_irq, diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index 74e6c67982f..51e62bbaa23 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -214,7 +214,7 @@ static void end_pcimt_irq(unsigned int irq) } static struct irq_chip pcimt_irq_type = { - .typename = "PCIMT", + .name = "PCIMT", .ack = disable_pcimt_irq, .mask = disable_pcimt_irq, .mask_ack = disable_pcimt_irq, diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c index 071a9573ac7..f4699d35858 100644 --- a/arch/mips/sni/pcit.c +++ b/arch/mips/sni/pcit.c @@ -176,7 +176,7 @@ void end_pcit_irq(unsigned int irq) } static struct irq_chip pcit_irq_type = { - .typename = "PCIT", + .name = "PCIT", .ack = disable_pcit_irq, .mask = disable_pcit_irq, .mask_ack = disable_pcit_irq, diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index 5e687819cbc..46f00691f44 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -449,7 +449,7 @@ void end_rm200_irq(unsigned int irq) } static struct irq_chip rm200_irq_type = { - .typename = "RM200", + .name = "RM200", .ack = disable_rm200_irq, .mask = disable_rm200_irq, .mask_ack = disable_rm200_irq, diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index a49272ce7ef..d16b462154c 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -60,7 +60,7 @@ static void __init sni_console_setup(void) char *cdev; char *baud; int port; - static char options[8]; + static char options[8] __initdata; cdev = prom_getenv("console_dev"); if (strncmp(cdev, "tty", 3) == 0) { diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index d66802edebb..06e801c7e25 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -160,7 +160,7 @@ static void __init prom_init_cmdline(void) int argc; int *argv32; int i; /* Always ignore the "-c" at argv[0] */ - static char builtin[CL_SIZE] __initdata; + static char builtin[COMMAND_LINE_SIZE] __initdata; if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) { /* @@ -315,7 +315,7 @@ static inline void txx9_cache_fixup(void) static void __init preprocess_cmdline(void) { - static char cmdline[CL_SIZE] __initdata; + static char cmdline[COMMAND_LINE_SIZE] __initdata; char *s; strcpy(cmdline, arcs_cmdline); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7678538344f..677cd53f18c 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -291,14 +291,6 @@ config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on ARCH_PXA -config MTD_NAND_BASLER_EXCITE - tristate "Support for NAND Flash on Basler eXcite" - depends on BASLER_EXCITE - help - This enables the driver for the NAND flash device found on the - Basler eXcite Smart Camera. If built as a module, the driver - will be named excite_nandflash. - config MTD_NAND_CAFE tristate "NAND support for OLPC CAFÉ chip" depends on PCI diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 460a1f39a8d..1407bd14401 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o -obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c deleted file mode 100644 index af6a6a5399e..00000000000 --- a/drivers/mtd/nand/excite_nandflash.c +++ /dev/null @@ -1,248 +0,0 @@ -/* -* Copyright (C) 2005 - 2007 by Basler Vision Technologies AG -* Author: Thomas Koeller <thomas.koeller.qbaslerweb.com> -* Original code by Thies Moeller <thies.moeller@baslerweb.com> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> -#include <asm/rm9k-ocd.h> - -#include <excite_nandflash.h> - -#define EXCITE_NANDFLASH_VERSION "0.1" - -/* I/O register offsets */ -#define EXCITE_NANDFLASH_DATA_BYTE 0x00 -#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c -#define EXCITE_NANDFLASH_ADDR_BYTE 0x10 -#define EXCITE_NANDFLASH_CMD_BYTE 0x14 - -/* prefix for debug output */ -static const char module_id[] = "excite_nandflash"; - -/* - * partition definition - */ -static const struct mtd_partition partition_info[] = { - { - .name = "eXcite RootFS", - .offset = 0, - .size = MTDPART_SIZ_FULL - } -}; - -static inline const struct resource * -excite_nand_get_resource(struct platform_device *d, unsigned long flags, - const char *basename) -{ - char buf[80]; - - if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf) - return NULL; - return platform_get_resource_byname(d, flags, buf); -} - -static inline void __iomem * -excite_nand_map_regs(struct platform_device *d, const char *basename) -{ - void *result = NULL; - const struct resource *const r = - excite_nand_get_resource(d, IORESOURCE_MEM, basename); - - if (r) - result = ioremap_nocache(r->start, r->end + 1 - r->start); - return result; -} - -/* controller and mtd information */ -struct excite_nand_drvdata { - struct mtd_info board_mtd; - struct nand_chip board_chip; - void __iomem *regs; - void __iomem *tgt; -}; - -/* Control function */ -static void excite_nand_control(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct excite_nand_drvdata * const d = - container_of(mtd, struct excite_nand_drvdata, board_mtd); - - switch (ctrl) { - case NAND_CTRL_CHANGE | NAND_CTRL_CLE: - d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE; - break; - case NAND_CTRL_CHANGE | NAND_CTRL_ALE: - d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE; - break; - case NAND_CTRL_CHANGE | NAND_NCE: - d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE; - break; - } - - if (cmd != NAND_CMD_NONE) - __raw_writeb(cmd, d->tgt); -} - -/* Return 0 if flash is busy, 1 if ready */ -static int excite_nand_devready(struct mtd_info *mtd) -{ - struct excite_nand_drvdata * const drvdata = - container_of(mtd, struct excite_nand_drvdata, board_mtd); - - return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE); -} - -/* - * Called by device layer to remove the driver. - * The binding to the mtd and all allocated - * resources are released. - */ -static int __devexit excite_nand_remove(struct platform_device *dev) -{ - struct excite_nand_drvdata * const this = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - - if (unlikely(!this)) { - printk(KERN_ERR "%s: called %s without private data!!", - module_id, __func__); - return -EINVAL; - } - - /* first thing we need to do is release our mtd - * then go through freeing the resource used - */ - nand_release(&this->board_mtd); - - /* free the common resources */ - iounmap(this->regs); - kfree(this); - - DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id); - return 0; -} - -/* - * Called by device layer when it finds a device matching - * one our driver can handle. This code checks to see if - * it can allocate all necessary resources then calls the - * nand layer to look for devices. -*/ -static int __init excite_nand_probe(struct platform_device *pdev) -{ - struct excite_nand_drvdata *drvdata; /* private driver data */ - struct nand_chip *board_chip; /* private flash chip data */ - struct mtd_info *board_mtd; /* mtd info for this board */ - int scan_res; - - drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); - if (unlikely(!drvdata)) { - printk(KERN_ERR "%s: no memory for drvdata\n", - module_id); - return -ENOMEM; - } - - /* bind private data into driver */ - platform_set_drvdata(pdev, drvdata); - - /* allocate and map the resource */ - drvdata->regs = - excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS); - - if (unlikely(!drvdata->regs)) { - printk(KERN_ERR "%s: cannot reserve register region\n", - module_id); - kfree(drvdata); - return -ENXIO; - } - - drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; - - /* initialise our chip */ - board_chip = &drvdata->board_chip; - board_chip->IO_ADDR_R = board_chip->IO_ADDR_W = - drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; - board_chip->cmd_ctrl = excite_nand_control; - board_chip->dev_ready = excite_nand_devready; - board_chip->chip_delay = 25; - board_chip->ecc.mode = NAND_ECC_SOFT; - - /* link chip to mtd */ - board_mtd = &drvdata->board_mtd; - board_mtd->priv = board_chip; - - DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id); - scan_res = nand_scan(&drvdata->board_mtd, 1); - - if (likely(!scan_res)) { - DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id); - add_mtd_partitions(&drvdata->board_mtd, partition_info, - ARRAY_SIZE(partition_info)); - } else { - iounmap(drvdata->regs); - kfree(drvdata); - printk(KERN_ERR "%s: device scan failed\n", module_id); - return -EIO; - } - return 0; -} - -static struct platform_driver excite_nand_driver = { - .driver = { - .name = "excite_nand", - .owner = THIS_MODULE, - }, - .probe = excite_nand_probe, - .remove = __devexit_p(excite_nand_remove) -}; - -static int __init excite_nand_init(void) -{ - pr_info("Basler eXcite nand flash driver Version " - EXCITE_NANDFLASH_VERSION "\n"); - return platform_driver_register(&excite_nand_driver); -} - -static void __exit excite_nand_exit(void) -{ - platform_driver_unregister(&excite_nand_driver); -} - -module_init(excite_nand_init); -module_exit(excite_nand_exit); - -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); -MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(EXCITE_NANDFLASH_VERSION) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a5be9ac6405..e58a65391ad 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1953,6 +1953,8 @@ config BCM63XX_ENET source "drivers/net/fs_enet/Kconfig" +source "drivers/net/octeon/Kconfig" + endif # NET_ETHERNET # diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 246323d7f16..ad1346dd9da 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -285,3 +285,5 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o obj-$(CONFIG_SFC) += sfc/ obj-$(CONFIG_WIMAX) += wimax/ + +obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/ diff --git a/drivers/net/octeon/Kconfig b/drivers/net/octeon/Kconfig new file mode 100644 index 00000000000..1e56bbf3f5c --- /dev/null +++ b/drivers/net/octeon/Kconfig @@ -0,0 +1,10 @@ +config OCTEON_MGMT_ETHERNET + tristate "Octeon Management port ethernet driver (CN5XXX, CN6XXX)" + depends on CPU_CAVIUM_OCTEON + select PHYLIB + select MDIO_OCTEON + default y + help + This option enables the ethernet driver for the management + port on Cavium Networks' Octeon CN57XX, CN56XX, CN55XX, + CN54XX, CN52XX, and CN6XXX chips. diff --git a/drivers/net/octeon/Makefile b/drivers/net/octeon/Makefile new file mode 100644 index 00000000000..906edecacfd --- /dev/null +++ b/drivers/net/octeon/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon_mgmt.o diff --git a/drivers/net/octeon/octeon_mgmt.c b/drivers/net/octeon/octeon_mgmt.c new file mode 100644 index 00000000000..050538bf155 --- /dev/null +++ b/drivers/net/octeon/octeon_mgmt.c @@ -0,0 +1,1176 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Cavium Networks + */ + +#include <linux/capability.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/phy.h> +#include <linux/spinlock.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-mixx-defs.h> +#include <asm/octeon/cvmx-agl-defs.h> + +#define DRV_NAME "octeon_mgmt" +#define DRV_VERSION "2.0" +#define DRV_DESCRIPTION \ + "Cavium Networks Octeon MII (management) port Network Driver" + +#define OCTEON_MGMT_NAPI_WEIGHT 16 + +/* + * Ring sizes that are powers of two allow for more efficient modulo + * opertions. + */ +#define OCTEON_MGMT_RX_RING_SIZE 512 +#define OCTEON_MGMT_TX_RING_SIZE 128 + +/* Allow 8 bytes for vlan and FCS. */ +#define OCTEON_MGMT_RX_HEADROOM (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN) + +union mgmt_port_ring_entry { + u64 d64; + struct { + u64 reserved_62_63:2; + /* Length of the buffer/packet in bytes */ + u64 len:14; + /* For TX, signals that the packet should be timestamped */ + u64 tstamp:1; + /* The RX error code */ + u64 code:7; +#define RING_ENTRY_CODE_DONE 0xf +#define RING_ENTRY_CODE_MORE 0x10 + /* Physical address of the buffer */ + u64 addr:40; + } s; +}; + +struct octeon_mgmt { + struct net_device *netdev; + int port; + int irq; + u64 *tx_ring; + dma_addr_t tx_ring_handle; + unsigned int tx_next; + unsigned int tx_next_clean; + unsigned int tx_current_fill; + /* The tx_list lock also protects the ring related variables */ + struct sk_buff_head tx_list; + + /* RX variables only touched in napi_poll. No locking necessary. */ + u64 *rx_ring; + dma_addr_t rx_ring_handle; + unsigned int rx_next; + unsigned int rx_next_fill; + unsigned int rx_current_fill; + struct sk_buff_head rx_list; + + spinlock_t lock; + unsigned int last_duplex; + unsigned int last_link; + struct device *dev; + struct napi_struct napi; + struct tasklet_struct tx_clean_tasklet; + struct phy_device *phydev; +}; + +static void octeon_mgmt_set_rx_irq(struct octeon_mgmt *p, int enable) +{ + int port = p->port; + union cvmx_mixx_intena mix_intena; + unsigned long flags; + + spin_lock_irqsave(&p->lock, flags); + mix_intena.u64 = cvmx_read_csr(CVMX_MIXX_INTENA(port)); + mix_intena.s.ithena = enable ? 1 : 0; + cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64); + spin_unlock_irqrestore(&p->lock, flags); +} + +static void octeon_mgmt_set_tx_irq(struct octeon_mgmt *p, int enable) +{ + int port = p->port; + union cvmx_mixx_intena mix_intena; + unsigned long flags; + + spin_lock_irqsave(&p->lock, flags); + mix_intena.u64 = cvmx_read_csr(CVMX_MIXX_INTENA(port)); + mix_intena.s.othena = enable ? 1 : 0; + cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64); + spin_unlock_irqrestore(&p->lock, flags); +} + +static inline void octeon_mgmt_enable_rx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_rx_irq(p, 1); +} + +static inline void octeon_mgmt_disable_rx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_rx_irq(p, 0); +} + +static inline void octeon_mgmt_enable_tx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_tx_irq(p, 1); +} + +static inline void octeon_mgmt_disable_tx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_tx_irq(p, 0); +} + +static unsigned int ring_max_fill(unsigned int ring_size) +{ + return ring_size - 8; +} + +static unsigned int ring_size_to_bytes(unsigned int ring_size) +{ + return ring_size * sizeof(union mgmt_port_ring_entry); +} + +static void octeon_mgmt_rx_fill_ring(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + + while (p->rx_current_fill < ring_max_fill(OCTEON_MGMT_RX_RING_SIZE)) { + unsigned int size; + union mgmt_port_ring_entry re; + struct sk_buff *skb; + + /* CN56XX pass 1 needs 8 bytes of padding. */ + size = netdev->mtu + OCTEON_MGMT_RX_HEADROOM + 8 + NET_IP_ALIGN; + + skb = netdev_alloc_skb(netdev, size); + if (!skb) + break; + skb_reserve(skb, NET_IP_ALIGN); + __skb_queue_tail(&p->rx_list, skb); + + re.d64 = 0; + re.s.len = size; + re.s.addr = dma_map_single(p->dev, skb->data, + size, + DMA_FROM_DEVICE); + + /* Put it in the ring. */ + p->rx_ring[p->rx_next_fill] = re.d64; + dma_sync_single_for_device(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + p->rx_next_fill = + (p->rx_next_fill + 1) % OCTEON_MGMT_RX_RING_SIZE; + p->rx_current_fill++; + /* Ring the bell. */ + cvmx_write_csr(CVMX_MIXX_IRING2(port), 1); + } +} + +static void octeon_mgmt_clean_tx_buffers(struct octeon_mgmt *p) +{ + int port = p->port; + union cvmx_mixx_orcnt mix_orcnt; + union mgmt_port_ring_entry re; + struct sk_buff *skb; + int cleaned = 0; + unsigned long flags; + + mix_orcnt.u64 = cvmx_read_csr(CVMX_MIXX_ORCNT(port)); + while (mix_orcnt.s.orcnt) { + dma_sync_single_for_cpu(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + + spin_lock_irqsave(&p->tx_list.lock, flags); + + re.d64 = p->tx_ring[p->tx_next_clean]; + p->tx_next_clean = + (p->tx_next_clean + 1) % OCTEON_MGMT_TX_RING_SIZE; + skb = __skb_dequeue(&p->tx_list); + + mix_orcnt.u64 = 0; + mix_orcnt.s.orcnt = 1; + + /* Acknowledge to hardware that we have the buffer. */ + cvmx_write_csr(CVMX_MIXX_ORCNT(port), mix_orcnt.u64); + p->tx_current_fill--; + + spin_unlock_irqrestore(&p->tx_list.lock, flags); + + dma_unmap_single(p->dev, re.s.addr, re.s.len, + DMA_TO_DEVICE); + dev_kfree_skb_any(skb); + cleaned++; + + mix_orcnt.u64 = cvmx_read_csr(CVMX_MIXX_ORCNT(port)); + } + + if (cleaned && netif_queue_stopped(p->netdev)) + netif_wake_queue(p->netdev); +} + +static void octeon_mgmt_clean_tx_tasklet(unsigned long arg) +{ + struct octeon_mgmt *p = (struct octeon_mgmt *)arg; + octeon_mgmt_clean_tx_buffers(p); + octeon_mgmt_enable_tx_irq(p); +} + +static void octeon_mgmt_update_rx_stats(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + unsigned long flags; + u64 drop, bad; + + /* These reads also clear the count registers. */ + drop = cvmx_read_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(port)); + bad = cvmx_read_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(port)); + + if (drop || bad) { + /* Do an atomic update. */ + spin_lock_irqsave(&p->lock, flags); + netdev->stats.rx_errors += bad; + netdev->stats.rx_dropped += drop; + spin_unlock_irqrestore(&p->lock, flags); + } +} + +static void octeon_mgmt_update_tx_stats(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + unsigned long flags; + + union cvmx_agl_gmx_txx_stat0 s0; + union cvmx_agl_gmx_txx_stat1 s1; + + /* These reads also clear the count registers. */ + s0.u64 = cvmx_read_csr(CVMX_AGL_GMX_TXX_STAT0(port)); + s1.u64 = cvmx_read_csr(CVMX_AGL_GMX_TXX_STAT1(port)); + + if (s0.s.xsdef || s0.s.xscol || s1.s.scol || s1.s.mcol) { + /* Do an atomic update. */ + spin_lock_irqsave(&p->lock, flags); + netdev->stats.tx_errors += s0.s.xsdef + s0.s.xscol; + netdev->stats.collisions += s1.s.scol + s1.s.mcol; + spin_unlock_irqrestore(&p->lock, flags); + } +} + +/* + * Dequeue a receive skb and its corresponding ring entry. The ring + * entry is returned, *pskb is updated to point to the skb. + */ +static u64 octeon_mgmt_dequeue_rx_buffer(struct octeon_mgmt *p, + struct sk_buff **pskb) +{ + union mgmt_port_ring_entry re; + + dma_sync_single_for_cpu(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + + re.d64 = p->rx_ring[p->rx_next]; + p->rx_next = (p->rx_next + 1) % OCTEON_MGMT_RX_RING_SIZE; + p->rx_current_fill--; + *pskb = __skb_dequeue(&p->rx_list); + + dma_unmap_single(p->dev, re.s.addr, + ETH_FRAME_LEN + OCTEON_MGMT_RX_HEADROOM, + DMA_FROM_DEVICE); + + return re.d64; +} + + +static int octeon_mgmt_receive_one(struct octeon_mgmt *p) +{ + int port = p->port; + struct net_device *netdev = p->netdev; + union cvmx_mixx_ircnt mix_ircnt; + union mgmt_port_ring_entry re; + struct sk_buff *skb; + struct sk_buff *skb2; + struct sk_buff *skb_new; + union mgmt_port_ring_entry re2; + int rc = 1; + + + re.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb); + if (likely(re.s.code == RING_ENTRY_CODE_DONE)) { + /* A good packet, send it up. */ + skb_put(skb, re.s.len); +good: + skb->protocol = eth_type_trans(skb, netdev); + netdev->stats.rx_packets++; + netdev->stats.rx_bytes += skb->len; + netdev->last_rx = jiffies; + netif_receive_skb(skb); + rc = 0; + } else if (re.s.code == RING_ENTRY_CODE_MORE) { + /* + * Packet split across skbs. This can happen if we + * increase the MTU. Buffers that are already in the + * rx ring can then end up being too small. As the rx + * ring is refilled, buffers sized for the new MTU + * will be used and we should go back to the normal + * non-split case. + */ + skb_put(skb, re.s.len); + do { + re2.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb2); + if (re2.s.code != RING_ENTRY_CODE_MORE + && re2.s.code != RING_ENTRY_CODE_DONE) + goto split_error; + skb_put(skb2, re2.s.len); + skb_new = skb_copy_expand(skb, 0, skb2->len, + GFP_ATOMIC); + if (!skb_new) + goto split_error; + if (skb_copy_bits(skb2, 0, skb_tail_pointer(skb_new), + skb2->len)) + goto split_error; + skb_put(skb_new, skb2->len); + dev_kfree_skb_any(skb); + dev_kfree_skb_any(skb2); + skb = skb_new; + } while (re2.s.code == RING_ENTRY_CODE_MORE); + goto good; + } else { + /* Some other error, discard it. */ + dev_kfree_skb_any(skb); + /* + * Error statistics are accumulated in + * octeon_mgmt_update_rx_stats. + */ + } + goto done; +split_error: + /* Discard the whole mess. */ + dev_kfree_skb_any(skb); + dev_kfree_skb_any(skb2); + while (re2.s.code == RING_ENTRY_CODE_MORE) { + re2.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb2); + dev_kfree_skb_any(skb2); + } + netdev->stats.rx_errors++; + +done: + /* Tell the hardware we processed a packet. */ + mix_ircnt.u64 = 0; + mix_ircnt.s.ircnt = 1; + cvmx_write_csr(CVMX_MIXX_IRCNT(port), mix_ircnt.u64); + return rc; + +} + +static int octeon_mgmt_receive_packets(struct octeon_mgmt *p, int budget) +{ + int port = p->port; + unsigned int work_done = 0; + union cvmx_mixx_ircnt mix_ircnt; + int rc; + + + mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port)); + while (work_done < budget && mix_ircnt.s.ircnt) { + + rc = octeon_mgmt_receive_one(p); + if (!rc) + work_done++; + + /* Check for more packets. */ + mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port)); + } + + octeon_mgmt_rx_fill_ring(p->netdev); + + return work_done; +} + +static int octeon_mgmt_napi_poll(struct napi_struct *napi, int budget) +{ + struct octeon_mgmt *p = container_of(napi, struct octeon_mgmt, napi); + struct net_device *netdev = p->netdev; + unsigned int work_done = 0; + + work_done = octeon_mgmt_receive_packets(p, budget); + + if (work_done < budget) { + /* We stopped because no more packets were available. */ + napi_complete(napi); + octeon_mgmt_enable_rx_irq(p); + } + octeon_mgmt_update_rx_stats(netdev); + + return work_done; +} + +/* Reset the hardware to clean state. */ +static void octeon_mgmt_reset_hw(struct octeon_mgmt *p) +{ + union cvmx_mixx_ctl mix_ctl; + union cvmx_mixx_bist mix_bist; + union cvmx_agl_gmx_bist agl_gmx_bist; + + mix_ctl.u64 = 0; + cvmx_write_csr(CVMX_MIXX_CTL(p->port), mix_ctl.u64); + do { + mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(p->port)); + } while (mix_ctl.s.busy); + mix_ctl.s.reset = 1; + cvmx_write_csr(CVMX_MIXX_CTL(p->port), mix_ctl.u64); + cvmx_read_csr(CVMX_MIXX_CTL(p->port)); + cvmx_wait(64); + + mix_bist.u64 = cvmx_read_csr(CVMX_MIXX_BIST(p->port)); + if (mix_bist.u64) + dev_warn(p->dev, "MIX failed BIST (0x%016llx)\n", + (unsigned long long)mix_bist.u64); + + agl_gmx_bist.u64 = cvmx_read_csr(CVMX_AGL_GMX_BIST); + if (agl_gmx_bist.u64) + dev_warn(p->dev, "AGL failed BIST (0x%016llx)\n", + (unsigned long long)agl_gmx_bist.u64); +} + +struct octeon_mgmt_cam_state { + u64 cam[6]; + u64 cam_mask; + int cam_index; +}; + +static void octeon_mgmt_cam_state_add(struct octeon_mgmt_cam_state *cs, + unsigned char *addr) +{ + int i; + + for (i = 0; i < 6; i++) + cs->cam[i] |= (u64)addr[i] << (8 * (cs->cam_index)); + cs->cam_mask |= (1ULL << cs->cam_index); + cs->cam_index++; +} + +static void octeon_mgmt_set_rx_filtering(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + int i; + union cvmx_agl_gmx_rxx_adr_ctl adr_ctl; + union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx; + unsigned long flags; + unsigned int prev_packet_enable; + unsigned int cam_mode = 1; /* 1 - Accept on CAM match */ + unsigned int multicast_mode = 1; /* 1 - Reject all multicast. */ + struct octeon_mgmt_cam_state cam_state; + struct dev_addr_list *list; + struct list_head *pos; + int available_cam_entries; + + memset(&cam_state, 0, sizeof(cam_state)); + + if ((netdev->flags & IFF_PROMISC) || netdev->dev_addrs.count > 7) { + cam_mode = 0; + available_cam_entries = 8; + } else { + /* + * One CAM entry for the primary address, leaves seven + * for the secondary addresses. + */ + available_cam_entries = 7 - netdev->dev_addrs.count; + } + + if (netdev->flags & IFF_MULTICAST) { + if (cam_mode == 0 || (netdev->flags & IFF_ALLMULTI) + || netdev->mc_count > available_cam_entries) + multicast_mode = 2; /* 1 - Accept all multicast. */ + else + multicast_mode = 0; /* 0 - Use CAM. */ + } + + if (cam_mode == 1) { + /* Add primary address. */ + octeon_mgmt_cam_state_add(&cam_state, netdev->dev_addr); + list_for_each(pos, &netdev->dev_addrs.list) { + struct netdev_hw_addr *hw_addr; + hw_addr = list_entry(pos, struct netdev_hw_addr, list); + octeon_mgmt_cam_state_add(&cam_state, hw_addr->addr); + list = list->next; + } + } + if (multicast_mode == 0) { + i = netdev->mc_count; + list = netdev->mc_list; + while (i--) { + octeon_mgmt_cam_state_add(&cam_state, list->da_addr); + list = list->next; + } + } + + + spin_lock_irqsave(&p->lock, flags); + + /* Disable packet I/O. */ + agl_gmx_prtx.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prev_packet_enable = agl_gmx_prtx.s.en; + agl_gmx_prtx.s.en = 0; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64); + + + adr_ctl.u64 = 0; + adr_ctl.s.cam_mode = cam_mode; + adr_ctl.s.mcst = multicast_mode; + adr_ctl.s.bcst = 1; /* Allow broadcast */ + + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port), adr_ctl.u64); + + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM0(port), cam_state.cam[0]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM1(port), cam_state.cam[1]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM2(port), cam_state.cam[2]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM3(port), cam_state.cam[3]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM4(port), cam_state.cam[4]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM5(port), cam_state.cam[5]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), cam_state.cam_mask); + + /* Restore packet I/O. */ + agl_gmx_prtx.s.en = prev_packet_enable; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64); + + spin_unlock_irqrestore(&p->lock, flags); +} + +static int octeon_mgmt_set_mac_address(struct net_device *netdev, void *addr) +{ + struct sockaddr *sa = addr; + + if (!is_valid_ether_addr(sa->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, sa->sa_data, ETH_ALEN); + + octeon_mgmt_set_rx_filtering(netdev); + + return 0; +} + +static int octeon_mgmt_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + int size_without_fcs = new_mtu + OCTEON_MGMT_RX_HEADROOM; + + /* + * Limit the MTU to make sure the ethernet packets are between + * 64 bytes and 16383 bytes. + */ + if (size_without_fcs < 64 || size_without_fcs > 16383) { + dev_warn(p->dev, "MTU must be between %d and %d.\n", + 64 - OCTEON_MGMT_RX_HEADROOM, + 16383 - OCTEON_MGMT_RX_HEADROOM); + return -EINVAL; + } + + netdev->mtu = new_mtu; + + cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_MAX(port), size_without_fcs); + cvmx_write_csr(CVMX_AGL_GMX_RXX_JABBER(port), + (size_without_fcs + 7) & 0xfff8); + + return 0; +} + +static irqreturn_t octeon_mgmt_interrupt(int cpl, void *dev_id) +{ + struct net_device *netdev = dev_id; + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union cvmx_mixx_isr mixx_isr; + + mixx_isr.u64 = cvmx_read_csr(CVMX_MIXX_ISR(port)); + + /* Clear any pending interrupts */ + cvmx_write_csr(CVMX_MIXX_ISR(port), + cvmx_read_csr(CVMX_MIXX_ISR(port))); + cvmx_read_csr(CVMX_MIXX_ISR(port)); + + if (mixx_isr.s.irthresh) { + octeon_mgmt_disable_rx_irq(p); + napi_schedule(&p->napi); + } + if (mixx_isr.s.orthresh) { + octeon_mgmt_disable_tx_irq(p); + tasklet_schedule(&p->tx_clean_tasklet); + } + + return IRQ_HANDLED; +} + +static int octeon_mgmt_ioctl(struct net_device *netdev, + struct ifreq *rq, int cmd) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + if (!netif_running(netdev)) + return -EINVAL; + + if (!p->phydev) + return -EINVAL; + + return phy_mii_ioctl(p->phydev, if_mii(rq), cmd); +} + +static void octeon_mgmt_adjust_link(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union cvmx_agl_gmx_prtx_cfg prtx_cfg; + unsigned long flags; + int link_changed = 0; + + spin_lock_irqsave(&p->lock, flags); + if (p->phydev->link) { + if (!p->last_link) + link_changed = 1; + if (p->last_duplex != p->phydev->duplex) { + p->last_duplex = p->phydev->duplex; + prtx_cfg.u64 = + cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prtx_cfg.s.duplex = p->phydev->duplex; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), + prtx_cfg.u64); + } + } else { + if (p->last_link) + link_changed = -1; + } + p->last_link = p->phydev->link; + spin_unlock_irqrestore(&p->lock, flags); + + if (link_changed != 0) { + if (link_changed > 0) { + netif_carrier_on(netdev); + pr_info("%s: Link is up - %d/%s\n", netdev->name, + p->phydev->speed, + DUPLEX_FULL == p->phydev->duplex ? + "Full" : "Half"); + } else { + netif_carrier_off(netdev); + pr_info("%s: Link is down\n", netdev->name); + } + } +} + +static int octeon_mgmt_init_phy(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + char phy_id[20]; + + if (octeon_is_simulation()) { + /* No PHYs in the simulator. */ + netif_carrier_on(netdev); + return 0; + } + + snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", p->port); + + p->phydev = phy_connect(netdev, phy_id, octeon_mgmt_adjust_link, 0, + PHY_INTERFACE_MODE_MII); + + if (IS_ERR(p->phydev)) { + p->phydev = NULL; + return -1; + } + + phy_start_aneg(p->phydev); + + return 0; +} + +static int octeon_mgmt_open(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union cvmx_mixx_ctl mix_ctl; + union cvmx_agl_gmx_inf_mode agl_gmx_inf_mode; + union cvmx_mixx_oring1 oring1; + union cvmx_mixx_iring1 iring1; + union cvmx_agl_gmx_prtx_cfg prtx_cfg; + union cvmx_agl_gmx_rxx_frm_ctl rxx_frm_ctl; + union cvmx_mixx_irhwm mix_irhwm; + union cvmx_mixx_orhwm mix_orhwm; + union cvmx_mixx_intena mix_intena; + struct sockaddr sa; + + /* Allocate ring buffers. */ + p->tx_ring = kzalloc(ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + GFP_KERNEL); + if (!p->tx_ring) + return -ENOMEM; + p->tx_ring_handle = + dma_map_single(p->dev, p->tx_ring, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + p->tx_next = 0; + p->tx_next_clean = 0; + p->tx_current_fill = 0; + + + p->rx_ring = kzalloc(ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + GFP_KERNEL); + if (!p->rx_ring) + goto err_nomem; + p->rx_ring_handle = + dma_map_single(p->dev, p->rx_ring, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + + p->rx_next = 0; + p->rx_next_fill = 0; + p->rx_current_fill = 0; + + octeon_mgmt_reset_hw(p); + + mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port)); + + /* Bring it out of reset if needed. */ + if (mix_ctl.s.reset) { + mix_ctl.s.reset = 0; + cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64); + do { + mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port)); + } while (mix_ctl.s.reset); + } + + agl_gmx_inf_mode.u64 = 0; + agl_gmx_inf_mode.s.en = 1; + cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64); + + oring1.u64 = 0; + oring1.s.obase = p->tx_ring_handle >> 3; + oring1.s.osize = OCTEON_MGMT_TX_RING_SIZE; + cvmx_write_csr(CVMX_MIXX_ORING1(port), oring1.u64); + + iring1.u64 = 0; + iring1.s.ibase = p->rx_ring_handle >> 3; + iring1.s.isize = OCTEON_MGMT_RX_RING_SIZE; + cvmx_write_csr(CVMX_MIXX_IRING1(port), iring1.u64); + + /* Disable packet I/O. */ + prtx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prtx_cfg.s.en = 0; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), prtx_cfg.u64); + + memcpy(sa.sa_data, netdev->dev_addr, ETH_ALEN); + octeon_mgmt_set_mac_address(netdev, &sa); + + octeon_mgmt_change_mtu(netdev, netdev->mtu); + + /* + * Enable the port HW. Packets are not allowed until + * cvmx_mgmt_port_enable() is called. + */ + mix_ctl.u64 = 0; + mix_ctl.s.crc_strip = 1; /* Strip the ending CRC */ + mix_ctl.s.en = 1; /* Enable the port */ + mix_ctl.s.nbtarb = 0; /* Arbitration mode */ + /* MII CB-request FIFO programmable high watermark */ + mix_ctl.s.mrq_hwm = 1; + cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64); + + if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) + || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + /* + * Force compensation values, as they are not + * determined properly by HW + */ + union cvmx_agl_gmx_drv_ctl drv_ctl; + + drv_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_DRV_CTL); + if (port) { + drv_ctl.s.byp_en1 = 1; + drv_ctl.s.nctl1 = 6; + drv_ctl.s.pctl1 = 6; + } else { + drv_ctl.s.byp_en = 1; + drv_ctl.s.nctl = 6; + drv_ctl.s.pctl = 6; + } + cvmx_write_csr(CVMX_AGL_GMX_DRV_CTL, drv_ctl.u64); + } + + octeon_mgmt_rx_fill_ring(netdev); + + /* Clear statistics. */ + /* Clear on read. */ + cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_CTL(port), 1); + cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(port), 0); + cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(port), 0); + + cvmx_write_csr(CVMX_AGL_GMX_TXX_STATS_CTL(port), 1); + cvmx_write_csr(CVMX_AGL_GMX_TXX_STAT0(port), 0); + cvmx_write_csr(CVMX_AGL_GMX_TXX_STAT1(port), 0); + + /* Clear any pending interrupts */ + cvmx_write_csr(CVMX_MIXX_ISR(port), cvmx_read_csr(CVMX_MIXX_ISR(port))); + + if (request_irq(p->irq, octeon_mgmt_interrupt, 0, netdev->name, + netdev)) { + dev_err(p->dev, "request_irq(%d) failed.\n", p->irq); + goto err_noirq; + } + + /* Interrupt every single RX packet */ + mix_irhwm.u64 = 0; + mix_irhwm.s.irhwm = 0; + cvmx_write_csr(CVMX_MIXX_IRHWM(port), mix_irhwm.u64); + + /* Interrupt when we have 5 or more packets to clean. */ + mix_orhwm.u64 = 0; + mix_orhwm.s.orhwm = 5; + cvmx_write_csr(CVMX_MIXX_ORHWM(port), mix_orhwm.u64); + + /* Enable receive and transmit interrupts */ + mix_intena.u64 = 0; + mix_intena.s.ithena = 1; + mix_intena.s.othena = 1; + cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64); + + + /* Enable packet I/O. */ + + rxx_frm_ctl.u64 = 0; + rxx_frm_ctl.s.pre_align = 1; + /* + * When set, disables the length check for non-min sized pkts + * with padding in the client data. + */ + rxx_frm_ctl.s.pad_len = 1; + /* When set, disables the length check for VLAN pkts */ + rxx_frm_ctl.s.vlan_len = 1; + /* When set, PREAMBLE checking is less strict */ + rxx_frm_ctl.s.pre_free = 1; + /* Control Pause Frames can match station SMAC */ + rxx_frm_ctl.s.ctl_smac = 0; + /* Control Pause Frames can match globally assign Multicast address */ + rxx_frm_ctl.s.ctl_mcst = 1; + /* Forward pause information to TX block */ + rxx_frm_ctl.s.ctl_bck = 1; + /* Drop Control Pause Frames */ + rxx_frm_ctl.s.ctl_drp = 1; + /* Strip off the preamble */ + rxx_frm_ctl.s.pre_strp = 1; + /* + * This port is configured to send PREAMBLE+SFD to begin every + * frame. GMX checks that the PREAMBLE is sent correctly. + */ + rxx_frm_ctl.s.pre_chk = 1; + cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_CTL(port), rxx_frm_ctl.u64); + + /* Enable the AGL block */ + agl_gmx_inf_mode.u64 = 0; + agl_gmx_inf_mode.s.en = 1; + cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64); + + /* Configure the port duplex and enables */ + prtx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prtx_cfg.s.tx_en = 1; + prtx_cfg.s.rx_en = 1; + prtx_cfg.s.en = 1; + p->last_duplex = 1; + prtx_cfg.s.duplex = p->last_duplex; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), prtx_cfg.u64); + + p->last_link = 0; + netif_carrier_off(netdev); + + if (octeon_mgmt_init_phy(netdev)) { + dev_err(p->dev, "Cannot initialize PHY.\n"); + goto err_noirq; + } + + netif_wake_queue(netdev); + napi_enable(&p->napi); + + return 0; +err_noirq: + octeon_mgmt_reset_hw(p); + dma_unmap_single(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->rx_ring); +err_nomem: + dma_unmap_single(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->tx_ring); + return -ENOMEM; +} + +static int octeon_mgmt_stop(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + napi_disable(&p->napi); + netif_stop_queue(netdev); + + if (p->phydev) + phy_disconnect(p->phydev); + + netif_carrier_off(netdev); + + octeon_mgmt_reset_hw(p); + + + free_irq(p->irq, netdev); + + /* dma_unmap is a nop on Octeon, so just free everything. */ + skb_queue_purge(&p->tx_list); + skb_queue_purge(&p->rx_list); + + dma_unmap_single(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->rx_ring); + + dma_unmap_single(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->tx_ring); + + + return 0; +} + +static int octeon_mgmt_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union mgmt_port_ring_entry re; + unsigned long flags; + + re.d64 = 0; + re.s.len = skb->len; + re.s.addr = dma_map_single(p->dev, skb->data, + skb->len, + DMA_TO_DEVICE); + + spin_lock_irqsave(&p->tx_list.lock, flags); + + if (unlikely(p->tx_current_fill >= + ring_max_fill(OCTEON_MGMT_TX_RING_SIZE))) { + spin_unlock_irqrestore(&p->tx_list.lock, flags); + + dma_unmap_single(p->dev, re.s.addr, re.s.len, + DMA_TO_DEVICE); + + netif_stop_queue(netdev); + return NETDEV_TX_BUSY; + } + + __skb_queue_tail(&p->tx_list, skb); + + /* Put it in the ring. */ + p->tx_ring[p->tx_next] = re.d64; + p->tx_next = (p->tx_next + 1) % OCTEON_MGMT_TX_RING_SIZE; + p->tx_current_fill++; + + spin_unlock_irqrestore(&p->tx_list.lock, flags); + + dma_sync_single_for_device(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + + netdev->stats.tx_packets++; + netdev->stats.tx_bytes += skb->len; + + /* Ring the bell. */ + cvmx_write_csr(CVMX_MIXX_ORING2(port), 1); + + netdev->trans_start = jiffies; + octeon_mgmt_clean_tx_buffers(p); + octeon_mgmt_update_tx_stats(netdev); + return NETDEV_TX_OK; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void octeon_mgmt_poll_controller(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + octeon_mgmt_receive_packets(p, 16); + octeon_mgmt_update_rx_stats(netdev); + return; +} +#endif + +static void octeon_mgmt_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *info) +{ + strncpy(info->driver, DRV_NAME, sizeof(info->driver)); + strncpy(info->version, DRV_VERSION, sizeof(info->version)); + strncpy(info->fw_version, "N/A", sizeof(info->fw_version)); + strncpy(info->bus_info, "N/A", sizeof(info->bus_info)); + info->n_stats = 0; + info->testinfo_len = 0; + info->regdump_len = 0; + info->eedump_len = 0; +} + +static int octeon_mgmt_get_settings(struct net_device *netdev, + struct ethtool_cmd *cmd) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + if (p->phydev) + return phy_ethtool_gset(p->phydev, cmd); + + return -EINVAL; +} + +static int octeon_mgmt_set_settings(struct net_device *netdev, + struct ethtool_cmd *cmd) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (p->phydev) + return phy_ethtool_sset(p->phydev, cmd); + + return -EINVAL; +} + +static const struct ethtool_ops octeon_mgmt_ethtool_ops = { + .get_drvinfo = octeon_mgmt_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_settings = octeon_mgmt_get_settings, + .set_settings = octeon_mgmt_set_settings +}; + +static const struct net_device_ops octeon_mgmt_ops = { + .ndo_open = octeon_mgmt_open, + .ndo_stop = octeon_mgmt_stop, + .ndo_start_xmit = octeon_mgmt_xmit, + .ndo_set_rx_mode = octeon_mgmt_set_rx_filtering, + .ndo_set_multicast_list = octeon_mgmt_set_rx_filtering, + .ndo_set_mac_address = octeon_mgmt_set_mac_address, + .ndo_do_ioctl = octeon_mgmt_ioctl, + .ndo_change_mtu = octeon_mgmt_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = octeon_mgmt_poll_controller, +#endif +}; + +static int __init octeon_mgmt_probe(struct platform_device *pdev) +{ + struct resource *res_irq; + struct net_device *netdev; + struct octeon_mgmt *p; + int i; + + netdev = alloc_etherdev(sizeof(struct octeon_mgmt)); + if (netdev == NULL) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, netdev); + p = netdev_priv(netdev); + netif_napi_add(netdev, &p->napi, octeon_mgmt_napi_poll, + OCTEON_MGMT_NAPI_WEIGHT); + + p->netdev = netdev; + p->dev = &pdev->dev; + + p->port = pdev->id; + snprintf(netdev->name, IFNAMSIZ, "mgmt%d", p->port); + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + goto err; + + p->irq = res_irq->start; + spin_lock_init(&p->lock); + + skb_queue_head_init(&p->tx_list); + skb_queue_head_init(&p->rx_list); + tasklet_init(&p->tx_clean_tasklet, + octeon_mgmt_clean_tx_tasklet, (unsigned long)p); + + netdev->netdev_ops = &octeon_mgmt_ops; + netdev->ethtool_ops = &octeon_mgmt_ethtool_ops; + + + /* The mgmt ports get the first N MACs. */ + for (i = 0; i < 6; i++) + netdev->dev_addr[i] = octeon_bootinfo->mac_addr_base[i]; + netdev->dev_addr[5] += p->port; + + if (p->port >= octeon_bootinfo->mac_addr_count) + dev_err(&pdev->dev, + "Error %s: Using MAC outside of the assigned range: " + "%02x:%02x:%02x:%02x:%02x:%02x\n", netdev->name, + netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], + netdev->dev_addr[4], netdev->dev_addr[5]); + + if (register_netdev(netdev)) + goto err; + + dev_info(&pdev->dev, "Version " DRV_VERSION "\n"); + return 0; +err: + free_netdev(netdev); + return -ENOENT; +} + +static int __exit octeon_mgmt_remove(struct platform_device *pdev) +{ + struct net_device *netdev = dev_get_drvdata(&pdev->dev); + + unregister_netdev(netdev); + free_netdev(netdev); + return 0; +} + +static struct platform_driver octeon_mgmt_driver = { + .driver = { + .name = "octeon_mgmt", + .owner = THIS_MODULE, + }, + .probe = octeon_mgmt_probe, + .remove = __exit_p(octeon_mgmt_remove), +}; + +extern void octeon_mdiobus_force_mod_depencency(void); + +static int __init octeon_mgmt_mod_init(void) +{ + /* Force our mdiobus driver module to be loaded first. */ + octeon_mdiobus_force_mod_depencency(); + return platform_driver_register(&octeon_mgmt_driver); +} + +static void __exit octeon_mgmt_mod_exit(void) +{ + platform_driver_unregister(&octeon_mgmt_driver); +} + +module_init(octeon_mgmt_mod_init); +module_exit(octeon_mgmt_mod_exit); + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR("David Daney"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index d5d8e1c5bc9..fc5938ba3d7 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -115,4 +115,15 @@ config MDIO_GPIO To compile this driver as a module, choose M here: the module will be called mdio-gpio. +config MDIO_OCTEON + tristate "Support for MDIO buses on Octeon SOCs" + depends on CPU_CAVIUM_OCTEON + default y + help + + This module provides a driver for the Octeon MDIO busses. + It is required by the Octeon Ethernet device drivers. + + If in doubt, say Y. + endif # PHYLIB diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index edfaac48cbd..1342585af38 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_STE10XP) += ste10Xp.o +obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c new file mode 100644 index 00000000000..61a4461cbda --- /dev/null +++ b/drivers/net/phy/mdio-octeon.c @@ -0,0 +1,180 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Cavium Networks + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/phy.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-smix-defs.h> + +#define DRV_VERSION "1.0" +#define DRV_DESCRIPTION "Cavium Networks Octeon SMI/MDIO driver" + +struct octeon_mdiobus { + struct mii_bus *mii_bus; + int unit; + int phy_irq[PHY_MAX_ADDR]; +}; + +static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum) +{ + struct octeon_mdiobus *p = bus->priv; + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_rd_dat smi_rd; + int timeout = 1000; + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = 1; /* MDIO_CLAUSE_22_READ */ + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = regnum; + cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64); + + do { + /* + * Wait 1000 clocks so we don't saturate the RSL bus + * doing reads. + */ + cvmx_wait(1000); + smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(p->unit)); + } while (smi_rd.s.pending && --timeout); + + if (smi_rd.s.val) + return smi_rd.s.dat; + else + return -EIO; +} + +static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id, + int regnum, u16 val) +{ + struct octeon_mdiobus *p = bus->priv; + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_wr_dat smi_wr; + int timeout = 1000; + + smi_wr.u64 = 0; + smi_wr.s.dat = val; + cvmx_write_csr(CVMX_SMIX_WR_DAT(p->unit), smi_wr.u64); + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_22_WRITE */ + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = regnum; + cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64); + + do { + /* + * Wait 1000 clocks so we don't saturate the RSL bus + * doing reads. + */ + cvmx_wait(1000); + smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(p->unit)); + } while (smi_wr.s.pending && --timeout); + + if (timeout <= 0) + return -EIO; + + return 0; +} + +static int __init octeon_mdiobus_probe(struct platform_device *pdev) +{ + struct octeon_mdiobus *bus; + int i; + int err = -ENOENT; + + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); + if (!bus) + return -ENOMEM; + + /* The platform_device id is our unit number. */ + bus->unit = pdev->id; + + bus->mii_bus = mdiobus_alloc(); + + if (!bus->mii_bus) + goto err; + + /* + * Standard Octeon evaluation boards don't support phy + * interrupts, we need to poll. + */ + for (i = 0; i < PHY_MAX_ADDR; i++) + bus->phy_irq[i] = PHY_POLL; + + bus->mii_bus->priv = bus; + bus->mii_bus->irq = bus->phy_irq; + bus->mii_bus->name = "mdio-octeon"; + snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%x", bus->unit); + bus->mii_bus->parent = &pdev->dev; + + bus->mii_bus->read = octeon_mdiobus_read; + bus->mii_bus->write = octeon_mdiobus_write; + + dev_set_drvdata(&pdev->dev, bus); + + err = mdiobus_register(bus->mii_bus); + if (err) + goto err_register; + + dev_info(&pdev->dev, "Version " DRV_VERSION "\n"); + + return 0; +err_register: + mdiobus_free(bus->mii_bus); + +err: + devm_kfree(&pdev->dev, bus); + return err; +} + +static int __exit octeon_mdiobus_remove(struct platform_device *pdev) +{ + struct octeon_mdiobus *bus; + + bus = dev_get_drvdata(&pdev->dev); + + mdiobus_unregister(bus->mii_bus); + mdiobus_free(bus->mii_bus); + return 0; +} + +static struct platform_driver octeon_mdiobus_driver = { + .driver = { + .name = "mdio-octeon", + .owner = THIS_MODULE, + }, + .probe = octeon_mdiobus_probe, + .remove = __exit_p(octeon_mdiobus_remove), +}; + +void octeon_mdiobus_force_mod_depencency(void) +{ + /* Let ethernet drivers force us to be loaded. */ +} +EXPORT_SYMBOL(octeon_mdiobus_force_mod_depencency); + +static int __init octeon_mdiobus_mod_init(void) +{ + return platform_driver_register(&octeon_mdiobus_driver); +} + +static void __exit octeon_mdiobus_mod_exit(void) +{ + platform_driver_unregister(&octeon_mdiobus_driver); +} + +module_init(octeon_mdiobus_mod_init); +module_exit(octeon_mdiobus_mod_exit); + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("David Daney"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index eb154dc5716..c8c12325e69 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -686,7 +686,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) */ #if defined(CONFIG_ATARI) address_space = 64; -#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) || defined(__sparc__) +#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \ + || defined(__sparc__) || defined(__mips__) address_space = 128; #else #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes. diff --git a/drivers/staging/octeon/Kconfig b/drivers/staging/octeon/Kconfig index 536e2382de5..638ad6b3589 100644 --- a/drivers/staging/octeon/Kconfig +++ b/drivers/staging/octeon/Kconfig @@ -1,7 +1,8 @@ config OCTEON_ETHERNET tristate "Cavium Networks Octeon Ethernet support" depends on CPU_CAVIUM_OCTEON - select MII + select PHYLIB + select MDIO_OCTEON help This driver supports the builtin ethernet ports on Cavium Networks' products in the Octeon family. This driver supports the diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c index 31a58e50892..05a5cc0f43e 100644 --- a/drivers/staging/octeon/ethernet-mdio.c +++ b/drivers/staging/octeon/ethernet-mdio.c @@ -26,7 +26,8 @@ **********************************************************************/ #include <linux/kernel.h> #include <linux/ethtool.h> -#include <linux/mii.h> +#include <linux/phy.h> + #include <net/dst.h> #include <asm/octeon/octeon.h> @@ -34,86 +35,12 @@ #include "ethernet-defines.h" #include "octeon-ethernet.h" #include "ethernet-mdio.h" +#include "ethernet-util.h" #include "cvmx-helper-board.h" #include "cvmx-smix-defs.h" -DECLARE_MUTEX(mdio_sem); - -/** - * Perform an MII read. Called by the generic MII routines - * - * @dev: Device to perform read for - * @phy_id: The MII phy id - * @location: Register location to read - * Returns Result from the read or zero on failure - */ -static int cvm_oct_mdio_read(struct net_device *dev, int phy_id, int location) -{ - union cvmx_smix_cmd smi_cmd; - union cvmx_smix_rd_dat smi_rd; - - smi_cmd.u64 = 0; - smi_cmd.s.phy_op = 1; - smi_cmd.s.phy_adr = phy_id; - smi_cmd.s.reg_adr = location; - cvmx_write_csr(CVMX_SMIX_CMD(0), smi_cmd.u64); - - do { - if (!in_interrupt()) - yield(); - smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(0)); - } while (smi_rd.s.pending); - - if (smi_rd.s.val) - return smi_rd.s.dat; - else - return 0; -} - -static int cvm_oct_mdio_dummy_read(struct net_device *dev, int phy_id, - int location) -{ - return 0xffff; -} - -/** - * Perform an MII write. Called by the generic MII routines - * - * @dev: Device to perform write for - * @phy_id: The MII phy id - * @location: Register location to write - * @val: Value to write - */ -static void cvm_oct_mdio_write(struct net_device *dev, int phy_id, int location, - int val) -{ - union cvmx_smix_cmd smi_cmd; - union cvmx_smix_wr_dat smi_wr; - - smi_wr.u64 = 0; - smi_wr.s.dat = val; - cvmx_write_csr(CVMX_SMIX_WR_DAT(0), smi_wr.u64); - - smi_cmd.u64 = 0; - smi_cmd.s.phy_op = 0; - smi_cmd.s.phy_adr = phy_id; - smi_cmd.s.reg_adr = location; - cvmx_write_csr(CVMX_SMIX_CMD(0), smi_cmd.u64); - - do { - if (!in_interrupt()) - yield(); - smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(0)); - } while (smi_wr.s.pending); -} - -static void cvm_oct_mdio_dummy_write(struct net_device *dev, int phy_id, - int location, int val) -{ -} - static void cvm_oct_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { @@ -125,49 +52,37 @@ static void cvm_oct_get_drvinfo(struct net_device *dev, static int cvm_oct_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct octeon_ethernet *priv = netdev_priv(dev); - int ret; - down(&mdio_sem); - ret = mii_ethtool_gset(&priv->mii_info, cmd); - up(&mdio_sem); + if (priv->phydev) + return phy_ethtool_gset(priv->phydev, cmd); - return ret; + return -EINVAL; } static int cvm_oct_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct octeon_ethernet *priv = netdev_priv(dev); - int ret; - down(&mdio_sem); - ret = mii_ethtool_sset(&priv->mii_info, cmd); - up(&mdio_sem); + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (priv->phydev) + return phy_ethtool_sset(priv->phydev, cmd); - return ret; + return -EINVAL; } static int cvm_oct_nway_reset(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); - int ret; - down(&mdio_sem); - ret = mii_nway_restart(&priv->mii_info); - up(&mdio_sem); + if (!capable(CAP_NET_ADMIN)) + return -EPERM; - return ret; -} + if (priv->phydev) + return phy_start_aneg(priv->phydev); -static u32 cvm_oct_get_link(struct net_device *dev) -{ - struct octeon_ethernet *priv = netdev_priv(dev); - u32 ret; - - down(&mdio_sem); - ret = mii_link_ok(&priv->mii_info); - up(&mdio_sem); - - return ret; + return -EINVAL; } const struct ethtool_ops cvm_oct_ethtool_ops = { @@ -175,7 +90,7 @@ const struct ethtool_ops cvm_oct_ethtool_ops = { .get_settings = cvm_oct_get_settings, .set_settings = cvm_oct_set_settings, .nway_reset = cvm_oct_nway_reset, - .get_link = cvm_oct_get_link, + .get_link = ethtool_op_get_link, .get_sg = ethtool_op_get_sg, .get_tx_csum = ethtool_op_get_tx_csum, }; @@ -191,41 +106,78 @@ const struct ethtool_ops cvm_oct_ethtool_ops = { int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct octeon_ethernet *priv = netdev_priv(dev); - struct mii_ioctl_data *data = if_mii(rq); - unsigned int duplex_chg; - int ret; - down(&mdio_sem); - ret = generic_mii_ioctl(&priv->mii_info, data, cmd, &duplex_chg); - up(&mdio_sem); + if (!netif_running(dev)) + return -EINVAL; + + if (!priv->phydev) + return -EINVAL; + + return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd); +} - return ret; +static void cvm_oct_adjust_link(struct net_device *dev) +{ + struct octeon_ethernet *priv = netdev_priv(dev); + cvmx_helper_link_info_t link_info; + + if (priv->last_link != priv->phydev->link) { + priv->last_link = priv->phydev->link; + link_info.u64 = 0; + link_info.s.link_up = priv->last_link ? 1 : 0; + link_info.s.full_duplex = priv->phydev->duplex ? 1 : 0; + link_info.s.speed = priv->phydev->speed; + cvmx_helper_link_set( priv->port, link_info); + if (priv->last_link) { + netif_carrier_on(dev); + if (priv->queue != -1) + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, queue %2d\n", + dev->name, priv->phydev->speed, + priv->phydev->duplex ? + "Full" : "Half", + priv->port, priv->queue); + else + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, POW\n", + dev->name, priv->phydev->speed, + priv->phydev->duplex ? + "Full" : "Half", + priv->port); + } else { + netif_carrier_off(dev); + DEBUGPRINT("%s: Link down\n", dev->name); + } + } } + /** - * Setup the MDIO device structures + * Setup the PHY * * @dev: Device to setup * * Returns Zero on success, negative on failure */ -int cvm_oct_mdio_setup_device(struct net_device *dev) +int cvm_oct_phy_setup_device(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); - int phy_id = cvmx_helper_board_get_mii_address(priv->port); - if (phy_id != -1) { - priv->mii_info.dev = dev; - priv->mii_info.phy_id = phy_id; - priv->mii_info.phy_id_mask = 0xff; - priv->mii_info.supports_gmii = 1; - priv->mii_info.reg_num_mask = 0x1f; - priv->mii_info.mdio_read = cvm_oct_mdio_read; - priv->mii_info.mdio_write = cvm_oct_mdio_write; - } else { - /* Supply dummy MDIO routines so the kernel won't crash - if the user tries to read them */ - priv->mii_info.mdio_read = cvm_oct_mdio_dummy_read; - priv->mii_info.mdio_write = cvm_oct_mdio_dummy_write; + + int phy_addr = cvmx_helper_board_get_mii_address(priv->port); + if (phy_addr != -1) { + char phy_id[20]; + + snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", phy_addr); + + priv->phydev = phy_connect(dev, phy_id, cvm_oct_adjust_link, 0, + PHY_INTERFACE_MODE_GMII); + + if (IS_ERR(priv->phydev)) { + priv->phydev = NULL; + return -1; + } + priv->last_link = 0; + phy_start_aneg(priv->phydev); } return 0; } diff --git a/drivers/staging/octeon/ethernet-mdio.h b/drivers/staging/octeon/ethernet-mdio.h index b3328aeec2d..55d0614a7cd 100644 --- a/drivers/staging/octeon/ethernet-mdio.h +++ b/drivers/staging/octeon/ethernet-mdio.h @@ -43,4 +43,4 @@ extern const struct ethtool_ops cvm_oct_ethtool_ops; int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -int cvm_oct_mdio_setup_device(struct net_device *dev); +int cvm_oct_phy_setup_device(struct net_device *dev); diff --git a/drivers/staging/octeon/ethernet-proc.c b/drivers/staging/octeon/ethernet-proc.c index 8fa88fc419b..16308d484d3 100644 --- a/drivers/staging/octeon/ethernet-proc.c +++ b/drivers/staging/octeon/ethernet-proc.c @@ -25,7 +25,6 @@ * Contact Cavium Networks for more information **********************************************************************/ #include <linux/kernel.h> -#include <linux/mii.h> #include <linux/seq_file.h> #include <linux/proc_fs.h> #include <net/dst.h> @@ -38,112 +37,6 @@ #include "cvmx-helper.h" #include "cvmx-pip.h" -static unsigned long long cvm_oct_stats_read_switch(struct net_device *dev, - int phy_id, int offset) -{ - struct octeon_ethernet *priv = netdev_priv(dev); - - priv->mii_info.mdio_write(dev, phy_id, 0x1d, 0xcc00 | offset); - return ((uint64_t) priv->mii_info. - mdio_read(dev, phy_id, - 0x1e) << 16) | (uint64_t) priv->mii_info. - mdio_read(dev, phy_id, 0x1f); -} - -static int cvm_oct_stats_switch_show(struct seq_file *m, void *v) -{ - static const int ports[] = { 0, 1, 2, 3, 9, -1 }; - struct net_device *dev = cvm_oct_device[0]; - int index = 0; - - while (ports[index] != -1) { - - /* Latch port */ - struct octeon_ethernet *priv = netdev_priv(dev); - - priv->mii_info.mdio_write(dev, 0x1b, 0x1d, - 0xdc00 | ports[index]); - seq_printf(m, "\nSwitch Port %d\n", ports[index]); - seq_printf(m, "InGoodOctets: %12llu\t" - "OutOctets: %12llu\t" - "64 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, - 0x00) | - (cvm_oct_stats_read_switch(dev, 0x1b, 0x01) << 32), - cvm_oct_stats_read_switch(dev, 0x1b, - 0x0E) | - (cvm_oct_stats_read_switch(dev, 0x1b, 0x0F) << 32), - cvm_oct_stats_read_switch(dev, 0x1b, 0x08)); - - seq_printf(m, "InBadOctets: %12llu\t" - "OutUnicast: %12llu\t" - "65-127 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x02), - cvm_oct_stats_read_switch(dev, 0x1b, 0x10), - cvm_oct_stats_read_switch(dev, 0x1b, 0x09)); - - seq_printf(m, "InUnicast: %12llu\t" - "OutBroadcasts: %12llu\t" - "128-255 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x04), - cvm_oct_stats_read_switch(dev, 0x1b, 0x13), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0A)); - - seq_printf(m, "InBroadcasts: %12llu\t" - "OutMulticasts: %12llu\t" - "256-511 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x06), - cvm_oct_stats_read_switch(dev, 0x1b, 0x12), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0B)); - - seq_printf(m, "InMulticasts: %12llu\t" - "OutPause: %12llu\t" - "512-1023 Octets:%12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x07), - cvm_oct_stats_read_switch(dev, 0x1b, 0x15), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0C)); - - seq_printf(m, "InPause: %12llu\t" - "Excessive: %12llu\t" - "1024-Max Octets:%12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x16), - cvm_oct_stats_read_switch(dev, 0x1b, 0x11), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0D)); - - seq_printf(m, "InUndersize: %12llu\t" - "Collisions: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x18), - cvm_oct_stats_read_switch(dev, 0x1b, 0x1E)); - - seq_printf(m, "InFragments: %12llu\t" - "Deferred: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x19), - cvm_oct_stats_read_switch(dev, 0x1b, 0x05)); - - seq_printf(m, "InOversize: %12llu\t" - "Single: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1A), - cvm_oct_stats_read_switch(dev, 0x1b, 0x14)); - - seq_printf(m, "InJabber: %12llu\t" - "Multiple: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1B), - cvm_oct_stats_read_switch(dev, 0x1b, 0x17)); - - seq_printf(m, "In RxErr: %12llu\t" - "OutFCSErr: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1C), - cvm_oct_stats_read_switch(dev, 0x1b, 0x03)); - - seq_printf(m, "InFCSErr: %12llu\t" - "Late: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1D), - cvm_oct_stats_read_switch(dev, 0x1b, 0x1F)); - index++; - } - return 0; -} - /** * User is reading /proc/octeon_ethernet_stats * @@ -215,11 +108,6 @@ static int cvm_oct_stats_show(struct seq_file *m, void *v) } } - if (cvm_oct_device[0]) { - priv = netdev_priv(cvm_oct_device[0]); - if (priv->imode == CVMX_HELPER_INTERFACE_MODE_GMII) - cvm_oct_stats_switch_show(m, v); - } return 0; } diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c index fbaa465d2fa..3820f1ec11d 100644 --- a/drivers/staging/octeon/ethernet-rgmii.c +++ b/drivers/staging/octeon/ethernet-rgmii.c @@ -147,32 +147,36 @@ static void cvm_oct_rgmii_poll(struct net_device *dev) cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, interface), gmxx_rxx_int_reg.u64); } - - link_info = cvmx_helper_link_autoconf(priv->port); - priv->link_info = link_info.u64; + if (priv->phydev == NULL) { + link_info = cvmx_helper_link_autoconf(priv->port); + priv->link_info = link_info.u64; + } spin_unlock_irqrestore(&global_register_lock, flags); - /* Tell Linux */ - if (link_info.s.link_up) { - - if (!netif_carrier_ok(dev)) - netif_carrier_on(dev); - if (priv->queue != -1) - DEBUGPRINT - ("%s: %u Mbps %s duplex, port %2d, queue %2d\n", - dev->name, link_info.s.speed, - (link_info.s.full_duplex) ? "Full" : "Half", - priv->port, priv->queue); - else - DEBUGPRINT("%s: %u Mbps %s duplex, port %2d, POW\n", - dev->name, link_info.s.speed, - (link_info.s.full_duplex) ? "Full" : "Half", - priv->port); - } else { - - if (netif_carrier_ok(dev)) - netif_carrier_off(dev); - DEBUGPRINT("%s: Link down\n", dev->name); + if (priv->phydev == NULL) { + /* Tell core. */ + if (link_info.s.link_up) { + if (!netif_carrier_ok(dev)) + netif_carrier_on(dev); + if (priv->queue != -1) + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, queue %2d\n", + dev->name, link_info.s.speed, + (link_info.s.full_duplex) ? + "Full" : "Half", + priv->port, priv->queue); + else + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, POW\n", + dev->name, link_info.s.speed, + (link_info.s.full_duplex) ? + "Full" : "Half", + priv->port); + } else { + if (netif_carrier_ok(dev)) + netif_carrier_off(dev); + DEBUGPRINT("%s: Link down\n", dev->name); + } } } diff --git a/drivers/staging/octeon/ethernet-sgmii.c b/drivers/staging/octeon/ethernet-sgmii.c index 2b54996bd85..6061d01eca2 100644 --- a/drivers/staging/octeon/ethernet-sgmii.c +++ b/drivers/staging/octeon/ethernet-sgmii.c @@ -113,7 +113,7 @@ int cvm_oct_sgmii_init(struct net_device *dev) struct octeon_ethernet *priv = netdev_priv(dev); cvm_oct_common_init(dev); dev->netdev_ops->ndo_stop(dev); - if (!octeon_is_simulation()) + if (!octeon_is_simulation() && priv->phydev == NULL) priv->poll = cvm_oct_sgmii_poll; /* FIXME: Need autoneg logic */ diff --git a/drivers/staging/octeon/ethernet-xaui.c b/drivers/staging/octeon/ethernet-xaui.c index 0c2e7cc40f3..ee3dc41b2c5 100644 --- a/drivers/staging/octeon/ethernet-xaui.c +++ b/drivers/staging/octeon/ethernet-xaui.c @@ -112,7 +112,7 @@ int cvm_oct_xaui_init(struct net_device *dev) struct octeon_ethernet *priv = netdev_priv(dev); cvm_oct_common_init(dev); dev->netdev_ops->ndo_stop(dev); - if (!octeon_is_simulation()) + if (!octeon_is_simulation() && priv->phydev == NULL) priv->poll = cvm_oct_xaui_poll; return 0; diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 492c5029992..4cfd4b136b3 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -30,7 +30,7 @@ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/delay.h> -#include <linux/mii.h> +#include <linux/phy.h> #include <net/dst.h> @@ -132,8 +132,6 @@ static struct timer_list cvm_oct_poll_timer; */ struct net_device *cvm_oct_device[TOTAL_NUMBER_OF_PORTS]; -extern struct semaphore mdio_sem; - /** * Periodic timer tick for slow management operations * @@ -160,13 +158,8 @@ static void cvm_do_timer(unsigned long arg) goto out; priv = netdev_priv(cvm_oct_device[port]); - if (priv->poll) { - /* skip polling if we don't get the lock */ - if (!down_trylock(&mdio_sem)) { - priv->poll(cvm_oct_device[port]); - up(&mdio_sem); - } - } + if (priv->poll) + priv->poll(cvm_oct_device[port]); queues_per_port = cvmx_pko_get_num_queues(port); /* Drain any pending packets in the free list */ @@ -524,7 +517,7 @@ int cvm_oct_common_init(struct net_device *dev) dev->features |= NETIF_F_LLTX; SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops); - cvm_oct_mdio_setup_device(dev); + cvm_oct_phy_setup_device(dev); dev->netdev_ops->ndo_set_mac_address(dev, &sa); dev->netdev_ops->ndo_change_mtu(dev, dev->mtu); @@ -540,7 +533,10 @@ int cvm_oct_common_init(struct net_device *dev) void cvm_oct_common_uninit(struct net_device *dev) { - /* Currently nothing to do */ + struct octeon_ethernet *priv = netdev_priv(dev); + + if (priv->phydev) + phy_disconnect(priv->phydev); } static const struct net_device_ops cvm_oct_npi_netdev_ops = { @@ -627,6 +623,8 @@ static const struct net_device_ops cvm_oct_pow_netdev_ops = { #endif }; +extern void octeon_mdiobus_force_mod_depencency(void); + /** * Module/ driver initialization. Creates the linux network * devices. @@ -640,6 +638,7 @@ static int __init cvm_oct_init_module(void) int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE; int qos; + octeon_mdiobus_force_mod_depencency(); pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION); if (OCTEON_IS_MODEL(OCTEON_CN52XX)) diff --git a/drivers/staging/octeon/octeon-ethernet.h b/drivers/staging/octeon/octeon-ethernet.h index 3aef9878fc0..402a15b9bb0 100644 --- a/drivers/staging/octeon/octeon-ethernet.h +++ b/drivers/staging/octeon/octeon-ethernet.h @@ -50,9 +50,9 @@ struct octeon_ethernet { /* List of outstanding tx buffers per queue */ struct sk_buff_head tx_free_list[16]; /* Device statistics */ - struct net_device_stats stats -; /* Generic MII info structure */ - struct mii_if_info mii_info; + struct net_device_stats stats; + struct phy_device *phydev; + unsigned int last_link; /* Last negotiated link state */ uint64_t link_info; /* Called periodically to check link status */ diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index d958b76430a..da84fd03850 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -815,16 +815,6 @@ config PNX833X_WDT timer has expired and no process has written to /dev/watchdog during that time. -config WDT_RM9K_GPI - tristate "RM9000/GPI hardware watchdog" - depends on CPU_RM9000 - help - Watchdog implementation using the GPI hardware found on - PMC-Sierra RM9xxx CPUs. - - To compile this driver as a module, choose M here: the - module will be called rm9k_wdt. - config SIBYTE_WDOG tristate "Sibyte SoC hardware watchdog" depends on CPU_SB1 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 89c045dc468..475c6110006 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -109,7 +109,6 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o obj-$(CONFIG_INDYDOG) += indydog.o obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o -obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o obj-$(CONFIG_TXX9_WDT) += txx9wdt.o diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c deleted file mode 100644 index bb66958b943..00000000000 --- a/drivers/watchdog/rm9k_wdt.c +++ /dev/null @@ -1,419 +0,0 @@ -/* - * Watchdog implementation for GPI h/w found on PMC-Sierra RM9xxx - * chips. - * - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/interrupt.h> -#include <linux/fs.h> -#include <linux/reboot.h> -#include <linux/notifier.h> -#include <linux/miscdevice.h> -#include <linux/watchdog.h> -#include <linux/io.h> -#include <linux/uaccess.h> -#include <asm/atomic.h> -#include <asm/processor.h> -#include <asm/system.h> -#include <asm/rm9k-ocd.h> - -#include <rm9k_wdt.h> - - -#define CLOCK 125000000 -#define MAX_TIMEOUT_SECONDS 32 -#define CPCCR 0x0080 -#define CPGIG1SR 0x0044 -#define CPGIG1ER 0x0054 - - -/* Function prototypes */ -static irqreturn_t wdt_gpi_irqhdl(int, void *); -static void wdt_gpi_start(void); -static void wdt_gpi_stop(void); -static void wdt_gpi_set_timeout(unsigned int); -static int wdt_gpi_open(struct inode *, struct file *); -static int wdt_gpi_release(struct inode *, struct file *); -static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, - loff_t *); -static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long); -static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *); -static const struct resource *wdt_gpi_get_resource(struct platform_device *, - const char *, unsigned int); -static int __init wdt_gpi_probe(struct platform_device *); -static int __exit wdt_gpi_remove(struct platform_device *); - - -static const char wdt_gpi_name[] = "wdt_gpi"; -static atomic_t opencnt; -static int expect_close; -static int locked; - - -/* These are set from device resources */ -static void __iomem *wd_regs; -static unsigned int wd_irq, wd_ctr; - - -/* Module arguments */ -static int timeout = MAX_TIMEOUT_SECONDS; -module_param(timeout, int, 0444); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds"); - -static unsigned long resetaddr = 0xbffdc200; -module_param(resetaddr, ulong, 0444); -MODULE_PARM_DESC(resetaddr, "Address to write to to force a reset"); - -static unsigned long flagaddr = 0xbffdc104; -module_param(flagaddr, ulong, 0444); -MODULE_PARM_DESC(flagaddr, "Address to write to boot flags to"); - -static int powercycle; -module_param(powercycle, bool, 0444); -MODULE_PARM_DESC(powercycle, "Cycle power if watchdog expires"); - -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, bool, 0444); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started"); - - -/* Kernel interfaces */ -static const struct file_operations fops = { - .owner = THIS_MODULE, - .open = wdt_gpi_open, - .release = wdt_gpi_release, - .write = wdt_gpi_write, - .unlocked_ioctl = wdt_gpi_ioctl, -}; - -static struct miscdevice miscdev = { - .minor = WATCHDOG_MINOR, - .name = wdt_gpi_name, - .fops = &fops, -}; - -static struct notifier_block wdt_gpi_shutdown = { - .notifier_call = wdt_gpi_notify, -}; - - -/* Interrupt handler */ -static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt) -{ - if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1)) - return IRQ_NONE; - __raw_writel(0x1, wd_regs + 0x0008); - - - printk(KERN_CRIT "%s: watchdog expired - resetting system\n", - wdt_gpi_name); - - *(volatile char *) flagaddr |= 0x01; - *(volatile char *) resetaddr = powercycle ? 0x01 : 0x2; - iob(); - while (1) - cpu_relax(); -} - - -/* Watchdog functions */ -static void wdt_gpi_start(void) -{ - u32 reg; - - lock_titan_regs(); - reg = titan_readl(CPGIG1ER); - titan_writel(reg | (0x100 << wd_ctr), CPGIG1ER); - iob(); - unlock_titan_regs(); -} - -static void wdt_gpi_stop(void) -{ - u32 reg; - - lock_titan_regs(); - reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); - titan_writel(reg, CPCCR); - reg = titan_readl(CPGIG1ER); - titan_writel(reg & ~(0x100 << wd_ctr), CPGIG1ER); - iob(); - unlock_titan_regs(); -} - -static void wdt_gpi_set_timeout(unsigned int to) -{ - u32 reg; - const u32 wdval = (to * CLOCK) & ~0x0000000f; - - lock_titan_regs(); - reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); - titan_writel(reg, CPCCR); - wmb(); - __raw_writel(wdval, wd_regs + 0x0000); - wmb(); - titan_writel(reg | (0x2 << (wd_ctr * 4)), CPCCR); - wmb(); - titan_writel(reg | (0x5 << (wd_ctr * 4)), CPCCR); - iob(); - unlock_titan_regs(); -} - - -/* /dev/watchdog operations */ -static int wdt_gpi_open(struct inode *inode, struct file *file) -{ - int res; - - if (unlikely(atomic_dec_if_positive(&opencnt) < 0)) - return -EBUSY; - - expect_close = 0; - if (locked) { - module_put(THIS_MODULE); - free_irq(wd_irq, &miscdev); - locked = 0; - } - - res = request_irq(wd_irq, wdt_gpi_irqhdl, IRQF_SHARED | IRQF_DISABLED, - wdt_gpi_name, &miscdev); - if (unlikely(res)) - return res; - - wdt_gpi_set_timeout(timeout); - wdt_gpi_start(); - - printk(KERN_INFO "%s: watchdog started, timeout = %u seconds\n", - wdt_gpi_name, timeout); - return nonseekable_open(inode, file); -} - -static int wdt_gpi_release(struct inode *inode, struct file *file) -{ - if (nowayout) { - printk(KERN_INFO "%s: no way out - watchdog left running\n", - wdt_gpi_name); - __module_get(THIS_MODULE); - locked = 1; - } else { - if (expect_close) { - wdt_gpi_stop(); - free_irq(wd_irq, &miscdev); - printk(KERN_INFO "%s: watchdog stopped\n", - wdt_gpi_name); - } else { - printk(KERN_CRIT "%s: unexpected close() -" - " watchdog left running\n", - wdt_gpi_name); - wdt_gpi_set_timeout(timeout); - __module_get(THIS_MODULE); - locked = 1; - } - } - - atomic_inc(&opencnt); - return 0; -} - -static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s, - loff_t *o) -{ - char val; - - wdt_gpi_set_timeout(timeout); - expect_close = (s > 0) && !get_user(val, d) && (val == 'V'); - return s ? 1 : 0; -} - -static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) -{ - long res = -ENOTTY; - const long size = _IOC_SIZE(cmd); - int stat; - void __user *argp = (void __user *)arg; - static struct watchdog_info wdinfo = { - .identity = "RM9xxx/GPI watchdog", - .firmware_version = 0, - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING - }; - - if (unlikely(_IOC_TYPE(cmd) != WATCHDOG_IOCTL_BASE)) - return -ENOTTY; - - if ((_IOC_DIR(cmd) & _IOC_READ) - && !access_ok(VERIFY_WRITE, arg, size)) - return -EFAULT; - - if ((_IOC_DIR(cmd) & _IOC_WRITE) - && !access_ok(VERIFY_READ, arg, size)) - return -EFAULT; - - expect_close = 0; - - switch (cmd) { - case WDIOC_GETSUPPORT: - wdinfo.options = nowayout ? - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING : - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE; - res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size; - break; - - case WDIOC_GETSTATUS: - break; - - case WDIOC_GETBOOTSTATUS: - stat = (*(volatile char *) flagaddr & 0x01) - ? WDIOF_CARDRESET : 0; - res = __copy_to_user(argp, &stat, size) ? - -EFAULT : size; - break; - - case WDIOC_SETOPTIONS: - break; - - case WDIOC_KEEPALIVE: - wdt_gpi_set_timeout(timeout); - res = size; - break; - - case WDIOC_SETTIMEOUT: - { - int val; - if (unlikely(__copy_from_user(&val, argp, size))) { - res = -EFAULT; - break; - } - - if (val > MAX_TIMEOUT_SECONDS) - val = MAX_TIMEOUT_SECONDS; - timeout = val; - wdt_gpi_set_timeout(val); - res = size; - printk(KERN_INFO "%s: timeout set to %u seconds\n", - wdt_gpi_name, timeout); - } - break; - - case WDIOC_GETTIMEOUT: - res = __copy_to_user(argp, &timeout, size) ? - -EFAULT : size; - break; - } - - return res; -} - - -/* Shutdown notifier */ -static int wdt_gpi_notify(struct notifier_block *this, unsigned long code, - void *unused) -{ - if (code == SYS_DOWN || code == SYS_HALT) - wdt_gpi_stop(); - - return NOTIFY_DONE; -} - - -/* Init & exit procedures */ -static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv, - const char *name, unsigned int type) -{ - char buf[80]; - if (snprintf(buf, sizeof(buf), "%s_0", name) >= sizeof(buf)) - return NULL; - return platform_get_resource_byname(pdv, type, buf); -} - -/* No hotplugging on the platform bus - use __devinit */ -static int __devinit wdt_gpi_probe(struct platform_device *pdv) -{ - int res; - const struct resource - * const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS, - IORESOURCE_MEM), - * const ri = wdt_gpi_get_resource(pdv, WDT_RESOURCE_IRQ, - IORESOURCE_IRQ), - * const rc = wdt_gpi_get_resource(pdv, WDT_RESOURCE_COUNTER, - 0); - - if (unlikely(!rr || !ri || !rc)) - return -ENXIO; - - wd_regs = ioremap_nocache(rr->start, rr->end + 1 - rr->start); - if (unlikely(!wd_regs)) - return -ENOMEM; - wd_irq = ri->start; - wd_ctr = rc->start; - res = misc_register(&miscdev); - if (res) - iounmap(wd_regs); - else - register_reboot_notifier(&wdt_gpi_shutdown); - return res; -} - -static int __devexit wdt_gpi_remove(struct platform_device *dev) -{ - int res; - - unregister_reboot_notifier(&wdt_gpi_shutdown); - res = misc_deregister(&miscdev); - iounmap(wd_regs); - wd_regs = NULL; - return res; -} - - -/* Device driver init & exit */ -static struct platform_driver wgt_gpi_driver = { - .driver = { - .name = wdt_gpi_name, - .owner = THIS_MODULE, - }, - .probe = wdt_gpi_probe, - .remove = __devexit_p(wdt_gpi_remove), -}; - -static int __init wdt_gpi_init_module(void) -{ - atomic_set(&opencnt, 1); - if (timeout > MAX_TIMEOUT_SECONDS) - timeout = MAX_TIMEOUT_SECONDS; - return platform_driver_register(&wdt_gpi_driver); -} - -static void __exit wdt_gpi_cleanup_module(void) -{ - platform_driver_unregister(&wdt_gpi_driver); -} - -module_init(wdt_gpi_init_module); -module_exit(wdt_gpi_cleanup_module); - -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); -MODULE_DESCRIPTION("Basler eXcite watchdog driver for gpi devices"); -MODULE_VERSION("0.1"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); - diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 341b58902ff..0b94d2fa3a8 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -207,6 +207,7 @@ endif ifdef CONFIG_FTRACE_MCOUNT_RECORD cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ + "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ "$(if $(CONFIG_64BIT),64,32)" \ "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ "$(if $(part-of-module),1,0)" "$(@)"; diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index 9cf0a6fad6b..92f09fe9639 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -113,13 +113,13 @@ $P =~ s@.*/@@g; my $V = '0.1'; -if ($#ARGV != 10) { - print "usage: $P arch bits objdump objcopy cc ld nm rm mv is_module inputfile\n"; +if ($#ARGV != 11) { + print "usage: $P arch endian bits objdump objcopy cc ld nm rm mv is_module inputfile\n"; print "version: $V\n"; exit(1); } -my ($arch, $bits, $objdump, $objcopy, $cc, +my ($arch, $endian, $bits, $objdump, $objcopy, $cc, $ld, $nm, $rm, $mv, $is_module, $inputfile) = @ARGV; # This file refers to mcount and shouldn't be ftraced, so lets' ignore it @@ -295,6 +295,58 @@ if ($arch eq "x86_64") { $ld .= " -m elf64_sparc"; $cc .= " -m64"; $objcopy .= " -O elf64-sparc"; +} elsif ($arch eq "mips") { + # To enable module support, we need to enable the -mlong-calls option + # of gcc for module, after using this option, we can not get the real + # offset of the calling to _mcount, but the offset of the lui + # instruction or the addiu one. herein, we record the address of the + # first one, and then we can replace this instruction by a branch + # instruction to jump over the profiling function to filter the + # indicated functions, or swith back to the lui instruction to trace + # them, which means dynamic tracing. + # + # c: 3c030000 lui v1,0x0 + # c: R_MIPS_HI16 _mcount + # c: R_MIPS_NONE *ABS* + # c: R_MIPS_NONE *ABS* + # 10: 64630000 daddiu v1,v1,0 + # 10: R_MIPS_LO16 _mcount + # 10: R_MIPS_NONE *ABS* + # 10: R_MIPS_NONE *ABS* + # 14: 03e0082d move at,ra + # 18: 0060f809 jalr v1 + # + # for the kernel: + # + # 10: 03e0082d move at,ra + # 14: 0c000000 jal 0 <loongson_halt> + # 14: R_MIPS_26 _mcount + # 14: R_MIPS_NONE *ABS* + # 14: R_MIPS_NONE *ABS* + # 18: 00020021 nop + if ($is_module eq "0") { + $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$"; + } else { + $mcount_regex = "^\\s*([0-9a-fA-F]+): R_MIPS_HI16\\s+_mcount\$"; + } + $objdump .= " -Melf-trad".$endian."mips "; + + if ($endian eq "big") { + $endian = " -EB "; + $ld .= " -melf".$bits."btsmip"; + } else { + $endian = " -EL "; + $ld .= " -melf".$bits."ltsmip"; + } + + $cc .= " -mno-abicalls -fno-pic -mabi=" . $bits . $endian; + $ld .= $endian; + + if ($bits == 64) { + $function_regex = + "^([0-9a-fA-F]+)\\s+<(.|[^\$]L.*?|\$[^L].*?|[^\$][^L].*?)>:"; + $type = ".dword"; + } } elsif ($arch eq "microblaze") { # Microblaze calls '_mcount' instead of plain 'mcount'. $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$"; |