summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/leds/Kconfig8
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/leds-pca9532.c337
-rw-r--r--include/linux/leds-pca9532.h45
4 files changed, 391 insertions, 0 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 86a369bc57d..1c35dfaef72 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -103,6 +103,14 @@ config LEDS_HP6XX
This option enables led support for the handheld
HP Jornada 620/660/680/690.
+config LEDS_PCA9532
+ tristate "LED driver for PCA9532 dimmer"
+ depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
+ help
+ This option enables support for NXP pca9532
+ led controller. It is generally only usefull
+ as a platform driver
+
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
depends on LEDS_CLASS && GENERIC_GPIO
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 973d626f5f4..7156f9970fa 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
+obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
new file mode 100644
index 00000000000..4064d4f6b33
--- /dev/null
+++ b/drivers/leds/leds-pca9532.c
@@ -0,0 +1,337 @@
+/*
+ * pca9532.c - 16-bit Led dimmer
+ *
+ * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/mutex.h>
+#include <linux/leds-pca9532.h>
+
+static const unsigned short normal_i2c[] = { /*0x60,*/ I2C_CLIENT_END};
+I2C_CLIENT_INSMOD_1(pca9532);
+
+#define PCA9532_REG_PSC(i) (0x2+(i)*2)
+#define PCA9532_REG_PWM(i) (0x3+(i)*2)
+#define PCA9532_REG_LS0 0x6
+#define LED_REG(led) ((led>>2)+PCA9532_REG_LS0)
+#define LED_NUM(led) (led & 0x3)
+
+#define ldev_to_led(c) container_of(c, struct pca9532_led, ldev)
+
+struct pca9532_data {
+ struct i2c_client *client;
+ struct pca9532_led leds[16];
+ struct mutex update_lock;
+ struct input_dev *idev;
+ u8 pwm[2];
+ u8 psc[2];
+};
+
+static int pca9532_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int pca9532_remove(struct i2c_client *client);
+
+static const struct i2c_device_id pca9532_id[] = {
+ { "pca9532", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, pca9532_id);
+
+static struct i2c_driver pca9532_driver = {
+ .driver = {
+ .name = "pca9532",
+ },
+ .probe = pca9532_probe,
+ .remove = pca9532_remove,
+ .id_table = pca9532_id,
+};
+
+/* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly,
+ * the clever Thecus people are using one pwm to drive the beeper. So,
+ * as a compromise we average one pwm to the values requested by all
+ * leds that are not ON/OFF.
+ * */
+static int pca9532_setpwm(struct i2c_client *client, int pwm, int blink,
+ enum led_brightness value)
+{
+ int a = 0, b = 0, i = 0;
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ for (i = 0; i < 16; i++) {
+ if (data->leds[i].type == PCA9532_TYPE_LED &&
+ data->leds[i].state == PCA9532_PWM0+pwm) {
+ a++;
+ b += data->leds[i].ldev.brightness;
+ }
+ }
+ if (a == 0) {
+ dev_err(&client->dev,
+ "fear of division by zero %d/%d, wanted %d\n",
+ b, a, value);
+ return -EINVAL;
+ }
+ b = b/a;
+ if (b > 0xFF)
+ return -EINVAL;
+ mutex_lock(&data->update_lock);
+ data->pwm[pwm] = b;
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
+ data->pwm[pwm]);
+ data->psc[pwm] = blink;
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
+ data->psc[pwm]);
+ mutex_unlock(&data->update_lock);
+ return 0;
+}
+
+/* Set LED routing */
+static void pca9532_setled(struct pca9532_led *led)
+{
+ struct i2c_client *client = led->client;
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ char reg;
+
+ mutex_lock(&data->update_lock);
+ reg = i2c_smbus_read_byte_data(client, LED_REG(led->id));
+ /* zero led bits */
+ reg = reg & ~(0x3<<LED_NUM(led->id)*2);
+ /* set the new value */
+ reg = reg | (led->state << LED_NUM(led->id)*2);
+ i2c_smbus_write_byte_data(client, LED_REG(led->id), reg);
+ mutex_unlock(&data->update_lock);
+}
+
+static void pca9532_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ int err = 0;
+ struct pca9532_led *led = ldev_to_led(led_cdev);
+
+ if (value == LED_OFF)
+ led->state = PCA9532_OFF;
+ else if (value == LED_FULL)
+ led->state = PCA9532_ON;
+ else {
+ led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
+ err = pca9532_setpwm(led->client, 0, 0, value);
+ if (err)
+ return; /* XXX: led api doesn't allow error code? */
+ }
+ pca9532_setled(led);
+}
+
+static int pca9532_set_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ struct pca9532_led *led = ldev_to_led(led_cdev);
+ struct i2c_client *client = led->client;
+ int psc;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* led subsystem ask us for a blink rate */
+ *delay_on = 1000;
+ *delay_off = 1000;
+ }
+ if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
+ return -EINVAL;
+
+ /* Thecus specific: only use PSC/PWM 0 */
+ psc = (*delay_on * 152-1)/1000;
+ return pca9532_setpwm(client, 0, psc, led_cdev->brightness);
+}
+
+int pca9532_event(struct input_dev *dev, unsigned int type, unsigned int code,
+ int value)
+{
+ struct pca9532_data *data = input_get_drvdata(dev);
+
+ if (type != EV_SND && (code != SND_BELL || code != SND_TONE))
+ return -1;
+
+ /* XXX: allow different kind of beeps with psc/pwm modifications */
+ if (value > 1 && value < 32767)
+ data->pwm[1] = 127;
+ else
+ data->pwm[1] = 0;
+
+ dev_info(&dev->dev, "setting beep to %d \n", data->pwm[1]);
+ mutex_lock(&data->update_lock);
+ i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
+ data->pwm[1]);
+ mutex_unlock(&data->update_lock);
+
+ return 0;
+}
+
+static int pca9532_configure(struct i2c_client *client,
+ struct pca9532_data *data, struct pca9532_platform_data *pdata)
+{
+ int i, err = 0;
+
+ for (i = 0; i < 2; i++) {
+ data->pwm[i] = pdata->pwm[i];
+ data->psc[i] = pdata->psc[i];
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(i),
+ data->pwm[i]);
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(i),
+ data->psc[i]);
+ }
+
+ for (i = 0; i < 16; i++) {
+ struct pca9532_led *led = &data->leds[i];
+ struct pca9532_led *pled = &pdata->leds[i];
+ led->client = client;
+ led->id = i;
+ led->type = pled->type;
+ switch (led->type) {
+ case PCA9532_TYPE_NONE:
+ break;
+ case PCA9532_TYPE_LED:
+ led->state = pled->state;
+ led->name = pled->name;
+ led->ldev.name = led->name;
+ led->ldev.brightness = LED_OFF;
+ led->ldev.brightness_set = pca9532_set_brightness;
+ led->ldev.blink_set = pca9532_set_blink;
+ if (led_classdev_register(&client->dev,
+ &led->ldev) < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led->name);
+ goto exit;
+ }
+ pca9532_setled(led);
+ break;
+ case PCA9532_TYPE_N2100_BEEP:
+ BUG_ON(data->idev);
+ led->state = PCA9532_PWM1;
+ pca9532_setled(led);
+ data->idev = input_allocate_device();
+ if (data->idev == NULL) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ data->idev->name = pled->name;
+ data->idev->phys = "i2c/pca9532";
+ data->idev->id.bustype = BUS_HOST;
+ data->idev->id.vendor = 0x001f;
+ data->idev->id.product = 0x0001;
+ data->idev->id.version = 0x0100;
+ data->idev->evbit[0] = BIT_MASK(EV_SND);
+ data->idev->sndbit[0] = BIT_MASK(SND_BELL) |
+ BIT_MASK(SND_TONE);
+ data->idev->event = pca9532_event;
+ input_set_drvdata(data->idev, data);
+ err = input_register_device(data->idev);
+ if (err) {
+ input_free_device(data->idev);
+ data->idev = NULL;
+ goto exit;
+ }
+ break;
+ }
+ }
+ return 0;
+
+exit:
+ if (i > 0)
+ for (i = i - 1; i >= 0; i--)
+ switch (data->leds[i].type) {
+ case PCA9532_TYPE_NONE:
+ break;
+ case PCA9532_TYPE_LED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ break;
+ case PCA9532_TYPE_N2100_BEEP:
+ if (data->idev != NULL) {
+ input_unregister_device(data->idev);
+ input_free_device(data->idev);
+ data->idev = NULL;
+ }
+ break;
+ }
+
+ return err;
+
+}
+
+static int pca9532_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ struct pca9532_platform_data *pca9532_pdata = client->dev.platform_data;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ data = kzalloc(sizeof(struct pca9532_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ dev_info(&client->dev, "setting platform data\n");
+ i2c_set_clientdata(client, data);
+ data->client = client;
+ mutex_init(&data->update_lock);
+
+ if (pca9532_pdata == NULL)
+ return -EIO;
+
+ pca9532_configure(client, data, pca9532_pdata);
+ return 0;
+
+}
+
+static int pca9532_remove(struct i2c_client *client)
+{
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ int i;
+ for (i = 0; i < 16; i++)
+ switch (data->leds[i].type) {
+ case PCA9532_TYPE_NONE:
+ break;
+ case PCA9532_TYPE_LED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ break;
+ case PCA9532_TYPE_N2100_BEEP:
+ if (data->idev != NULL) {
+ input_unregister_device(data->idev);
+ input_free_device(data->idev);
+ data->idev = NULL;
+ }
+ break;
+ }
+
+ kfree(data);
+ i2c_set_clientdata(client, NULL);
+ return 0;
+}
+
+static int __init pca9532_init(void)
+{
+ return i2c_add_driver(&pca9532_driver);
+}
+
+static void __exit pca9532_exit(void)
+{
+ i2c_del_driver(&pca9532_driver);
+}
+
+MODULE_AUTHOR("Riku Voipio <riku.voipio@movial.fi>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCA 9532 LED dimmer");
+
+module_init(pca9532_init);
+module_exit(pca9532_exit);
+
diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h
new file mode 100644
index 00000000000..81b4207deb9
--- /dev/null
+++ b/include/linux/leds-pca9532.h
@@ -0,0 +1,45 @@
+/*
+ * pca9532.h - platform data structure for pca9532 led controller
+ *
+ * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
+ *
+ */
+
+#ifndef __LINUX_PCA9532_H
+#define __LINUX_PCA9532_H
+
+#include <linux/leds.h>
+
+enum pca9532_state {
+ PCA9532_OFF = 0x0,
+ PCA9532_ON = 0x1,
+ PCA9532_PWM0 = 0x2,
+ PCA9532_PWM1 = 0x3
+};
+
+enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED,
+ PCA9532_TYPE_N2100_BEEP };
+
+struct pca9532_led {
+ u8 id;
+ struct i2c_client *client;
+ char *name;
+ struct led_classdev ldev;
+ enum pca9532_type type;
+ enum pca9532_state state;
+};
+
+struct pca9532_platform_data {
+ struct pca9532_led leds[16];
+ u8 pwm[2];
+ u8 psc[2];
+};
+
+#endif /* __LINUX_PCA9532_H */
+
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-21 15:26:57 +0000