diff options
| -rw-r--r-- | Documentation/hwmon/it87 | 1 | ||||
| -rw-r--r-- | drivers/hwmon/it87.c | 20 |
2 files changed, 16 insertions, 5 deletions
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 659315d98e0..f9ba96c0ac4 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -86,7 +86,6 @@ The IT8712F and IT8716F additionally feature VID inputs, used to report the Vcore voltage of the processor. The early IT8712F have 5 VID pins, the IT8716F and late IT8712F have 6. They are shared with other functions though, so the functionality may not be available on a given system. -The driver dumbly assume it is there. The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value is stored in the Super-I/O configuration space. Due to technical limitations, diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index a3749cb0f18..2f782e3f9a2 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -124,6 +124,7 @@ superio_exit(void) #define IT87_BASE_REG 0x60 /* Logical device 7 registers (IT8712F and later) */ +#define IT87_SIO_GPIO3_REG 0x27 #define IT87_SIO_PINX2_REG 0x2c /* Pin selection */ #define IT87_SIO_VID_REG 0xfc /* VID value */ @@ -244,6 +245,7 @@ struct it87_sio_data { /* Values read from Super-I/O config space */ u8 revision; u8 vid_value; + u8 skip_vid; /* Values set based on DMI strings */ u8 skip_pwm; }; @@ -1028,11 +1030,22 @@ static int __init it87_find(unsigned short *address, chip_type, *address, sio_data->revision); /* Read GPIO config and VID value from LDN 7 (GPIO) */ - if (sio_data->type != it87) { + if (sio_data->type == it87) { + /* The IT8705F doesn't have VID pins at all */ + sio_data->skip_vid = 1; + } else { int reg; superio_select(GPIO); - if (sio_data->type == it8718 || sio_data->type == it8720) + /* We need at least 4 VID pins */ + reg = superio_inb(IT87_SIO_GPIO3_REG); + if (reg & 0x0f) { + pr_info("it87: VID is disabled (pins used for GPIO)\n"); + sio_data->skip_vid = 1; + } + + if ((sio_data->type == it8718 || sio_data->type == it8720) + && !(sio_data->skip_vid)) sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); @@ -1236,8 +1249,7 @@ static int __devinit it87_probe(struct platform_device *pdev) } } - if (data->type == it8712 || data->type == it8716 - || data->type == it8718 || data->type == it8720) { + if (!sio_data->skip_vid) { data->vrm = vid_which_vrm(); /* VID reading from Super-I/O config space if available */ data->vid = sio_data->vid_value; |