diff options
-rw-r--r-- | drivers/scsi/Kconfig | 7 | ||||
-rw-r--r-- | drivers/scsi/Makefile | 1 | ||||
-rw-r--r-- | drivers/scsi/scsi_transport_sas.c | 819 | ||||
-rw-r--r-- | include/scsi/scsi_transport_sas.h | 100 |
4 files changed, 927 insertions, 0 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 2d21265e650..20019b82b4a 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -235,6 +235,13 @@ config SCSI_ISCSI_ATTRS each attached iSCSI device to sysfs, say Y. Otherwise, say N. +config SCSI_SAS_ATTRS + tristate "SAS Transport Attributes" + depends on SCSI + help + If you wish to export transport-specific information about + each attached SAS device to sysfs, say Y. + endmenu menu "SCSI low-level drivers" diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 4b4fd94c267..1e4edbdf273 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_RAID_ATTRS) += raid_class.o obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o +obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c new file mode 100644 index 00000000000..ac4a53a019c --- /dev/null +++ b/drivers/scsi/scsi_transport_sas.c @@ -0,0 +1,819 @@ +/* + * Copyright (C) 2005 Dell Inc. + * Released under GPL v2. + * + * Serial Attached SCSI (SAS) transport class. + * + * The SAS transport class contains common code to deal with SAS HBAs, + * an aproximated representation of SAS topologies in the driver model, + * and various sysfs attributes to expose these topologies and managment + * interfaces to userspace. + * + * In addition to the basic SCSI core objects this transport class + * introduces two additional intermediate objects: The SAS PHY + * as represented by struct sas_phy defines an "outgoing" PHY on + * a SAS HBA or Expander, and the SAS remote PHY represented by + * struct sas_rphy defines an "incoming" PHY on a SAS Expander or + * end device. Note that this is purely a software concept, the + * underlying hardware for a PHY and a remote PHY is the exactly + * the same. + * + * There is no concept of a SAS port in this code, users can see + * what PHYs form a wide port based on the port_identifier attribute, + * which is the same for all PHYs in a port. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/err.h> + +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_sas.h> + + +#define SAS_HOST_ATTRS 0 +#define SAS_PORT_ATTRS 11 +#define SAS_RPORT_ATTRS 5 + +struct sas_internal { + struct scsi_transport_template t; + struct sas_function_template *f; + + struct class_device_attribute private_host_attrs[SAS_HOST_ATTRS]; + struct class_device_attribute private_phy_attrs[SAS_PORT_ATTRS]; + struct class_device_attribute private_rphy_attrs[SAS_RPORT_ATTRS]; + + struct transport_container phy_attr_cont; + struct transport_container rphy_attr_cont; + + /* + * The array of null terminated pointers to attributes + * needed by scsi_sysfs.c + */ + struct class_device_attribute *host_attrs[SAS_HOST_ATTRS + 1]; + struct class_device_attribute *phy_attrs[SAS_PORT_ATTRS + 1]; + struct class_device_attribute *rphy_attrs[SAS_RPORT_ATTRS + 1]; +}; +#define to_sas_internal(tmpl) container_of(tmpl, struct sas_internal, t) + +struct sas_host_attrs { + struct list_head rphy_list; + spinlock_t lock; + u32 next_target_id; +}; +#define to_sas_host_attrs(host) ((struct sas_host_attrs *)(host)->shost_data) + + +/* + * Hack to allow attributes of the same name in different objects. + */ +#define SAS_CLASS_DEVICE_ATTR(_prefix,_name,_mode,_show,_store) \ + struct class_device_attribute class_device_attr_##_prefix##_##_name = \ + __ATTR(_name,_mode,_show,_store) + + +/* + * Pretty printing helpers + */ + +#define sas_bitfield_name_match(title, table) \ +static ssize_t \ +get_sas_##title##_names(u32 table_key, char *buf) \ +{ \ + char *prefix = ""; \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < sizeof(table)/sizeof(table[0]); i++) { \ + if (table[i].value & table_key) { \ + len += sprintf(buf + len, "%s%s", \ + prefix, table[i].name); \ + prefix = ", "; \ + } \ + } \ + len += sprintf(buf + len, "\n"); \ + return len; \ +} + +#define sas_bitfield_name_search(title, table) \ +static ssize_t \ +get_sas_##title##_names(u32 table_key, char *buf) \ +{ \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < sizeof(table)/sizeof(table[0]); i++) { \ + if (table[i].value == table_key) { \ + len += sprintf(buf + len, "%s", \ + table[i].name); \ + break; \ + } \ + } \ + len += sprintf(buf + len, "\n"); \ + return len; \ +} + +static struct { + u32 value; + char *name; +} sas_device_type_names[] = { + { SAS_PHY_UNUSED, "unused" }, + { SAS_END_DEVICE, "end device" }, + { SAS_EDGE_EXPANDER_DEVICE, "edge expander" }, + { SAS_FANOUT_EXPANDER_DEVICE, "fanout expander" }, +}; +sas_bitfield_name_search(device_type, sas_device_type_names) + + +static struct { + u32 value; + char *name; +} sas_protocol_names[] = { + { SAS_PROTOCOL_SATA, "sata" }, + { SAS_PROTOCOL_SMP, "smp" }, + { SAS_PROTOCOL_STP, "stp" }, + { SAS_PROTOCOL_SSP, "ssp" }, +}; +sas_bitfield_name_match(protocol, sas_protocol_names) + +static struct { + u32 value; + char *name; +} sas_linkspeed_names[] = { + { SAS_LINK_RATE_UNKNOWN, "Unknown" }, + { SAS_PHY_DISABLED, "Phy disabled" }, + { SAS_LINK_RATE_FAILED, "Link Rate failed" }, + { SAS_SATA_SPINUP_HOLD, "Spin-up hold" }, + { SAS_LINK_RATE_1_5_GBPS, "1.5 Gbit" }, + { SAS_LINK_RATE_3_0_GBPS, "3.0 Gbit" }, +}; +sas_bitfield_name_search(linkspeed, sas_linkspeed_names) + + +/* + * SAS host attributes + */ + +static int sas_host_setup(struct device *dev) +{ + struct Scsi_Host *shost = dev_to_shost(dev); + struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); + + INIT_LIST_HEAD(&sas_host->rphy_list); + spin_lock_init(&sas_host->lock); + sas_host->next_target_id = 0; + return 0; +} + +static DECLARE_TRANSPORT_CLASS(sas_host_class, + "sas_host", sas_host_setup, NULL, NULL); + +static int sas_host_match(struct attribute_container *cont, + struct device *dev) +{ + struct Scsi_Host *shost; + struct sas_internal *i; + + if (!scsi_is_host_device(dev)) + return 0; + shost = dev_to_shost(dev); + + if (!shost->transportt) + return 0; + if (shost->transportt->host_attrs.ac.class != + &sas_host_class.class) + return 0; + + i = to_sas_internal(shost->transportt); + return &i->t.host_attrs.ac == cont; +} + +static int do_sas_phy_delete(struct device *dev, void *data) +{ + if (scsi_is_sas_phy(dev)) + sas_phy_delete(dev_to_phy(dev)); + return 0; +} + +/** + * sas_remove_host -- tear down a Scsi_Host's SAS data structures + * @shost: Scsi Host that is torn down + * + * Removes all SAS PHYs and remote PHYs for a given Scsi_Host. + * Must be called just before scsi_remove_host for SAS HBAs. + */ +void sas_remove_host(struct Scsi_Host *shost) +{ + device_for_each_child(&shost->shost_gendev, NULL, do_sas_phy_delete); +} +EXPORT_SYMBOL(sas_remove_host); + + +/* + * SAS Port attributes + */ + +#define sas_phy_show_simple(field, name, format_string, cast) \ +static ssize_t \ +show_sas_phy_##name(struct class_device *cdev, char *buf) \ +{ \ + struct sas_phy *phy = transport_class_to_phy(cdev); \ + \ + return snprintf(buf, 20, format_string, cast phy->field); \ +} + +#define sas_phy_simple_attr(field, name, format_string, type) \ + sas_phy_show_simple(field, name, format_string, (type)) \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL) + +#define sas_phy_show_protocol(field, name) \ +static ssize_t \ +show_sas_phy_##name(struct class_device *cdev, char *buf) \ +{ \ + struct sas_phy *phy = transport_class_to_phy(cdev); \ + \ + if (!phy->field) \ + return snprintf(buf, 20, "none\n"); \ + return get_sas_protocol_names(phy->field, buf); \ +} + +#define sas_phy_protocol_attr(field, name) \ + sas_phy_show_protocol(field, name) \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL) + +#define sas_phy_show_linkspeed(field) \ +static ssize_t \ +show_sas_phy_##field(struct class_device *cdev, char *buf) \ +{ \ + struct sas_phy *phy = transport_class_to_phy(cdev); \ + \ + return get_sas_linkspeed_names(phy->field, buf); \ +} + +#define sas_phy_linkspeed_attr(field) \ + sas_phy_show_linkspeed(field) \ +static CLASS_DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL) + +static ssize_t +show_sas_device_type(struct class_device *cdev, char *buf) +{ + struct sas_phy *phy = transport_class_to_phy(cdev); + + if (!phy->identify.device_type) + return snprintf(buf, 20, "none\n"); + return get_sas_device_type_names(phy->identify.device_type, buf); +} + +static CLASS_DEVICE_ATTR(device_type, S_IRUGO, show_sas_device_type, NULL); + +sas_phy_protocol_attr(identify.initiator_port_protocols, + initiator_port_protocols); +sas_phy_protocol_attr(identify.target_port_protocols, + target_port_protocols); +sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n", + unsigned long long); +sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8); +sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", u8); +sas_phy_linkspeed_attr(negotiated_linkrate); +sas_phy_linkspeed_attr(minimum_linkrate_hw); +sas_phy_linkspeed_attr(minimum_linkrate); +sas_phy_linkspeed_attr(maximum_linkrate_hw); +sas_phy_linkspeed_attr(maximum_linkrate); + + +static DECLARE_TRANSPORT_CLASS(sas_phy_class, + "sas_phy", NULL, NULL, NULL); + +static int sas_phy_match(struct attribute_container *cont, struct device *dev) +{ + struct Scsi_Host *shost; + struct sas_internal *i; + + if (!scsi_is_sas_phy(dev)) + return 0; + shost = dev_to_shost(dev->parent); + + if (!shost->transportt) + return 0; + if (shost->transportt->host_attrs.ac.class != + &sas_host_class.class) + return 0; + + i = to_sas_internal(shost->transportt); + return &i->phy_attr_cont.ac == cont; +} + +static void sas_phy_release(struct device *dev) +{ + struct sas_phy *phy = dev_to_phy(dev); + + put_device(dev->parent); + kfree(phy); +} + +/** + * sas_phy_alloc -- allocates and initialize a SAS PHY structure + * @parent: Parent device + * @number: Port number + * + * Allocates an SAS PHY structure. It will be added in the device tree + * below the device specified by @parent, which has to be either a Scsi_Host + * or sas_rphy. + * + * Returns: + * SAS PHY allocated or %NULL if the allocation failed. + */ +struct sas_phy *sas_phy_alloc(struct device *parent, int number) +{ + struct Scsi_Host *shost = dev_to_shost(parent); + struct sas_phy *phy; + + phy = kmalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) + return NULL; + memset(phy, 0, sizeof(*phy)); + + get_device(parent); + + phy->number = number; + + device_initialize(&phy->dev); + phy->dev.parent = get_device(parent); + phy->dev.release = sas_phy_release; + sprintf(phy->dev.bus_id, "phy-%d:%d", shost->host_no, number); + + transport_setup_device(&phy->dev); + + return phy; +} +EXPORT_SYMBOL(sas_phy_alloc); + +/** + * sas_phy_add -- add a SAS PHY to the device hierachy + * @phy: The PHY to be added + * + * Publishes a SAS PHY to the rest of the system. + */ +int sas_phy_add(struct sas_phy *phy) +{ + int error; + + error = device_add(&phy->dev); + if (!error) { + transport_add_device(&phy->dev); + transport_configure_device(&phy->dev); + } + + return error; +} +EXPORT_SYMBOL(sas_phy_add); + +/** + * sas_phy_free -- free a SAS PHY + * @phy: SAS PHY to free + * + * Frees the specified SAS PHY. + * + * Note: + * This function must only be called on a PHY that has not + * sucessfully been added using sas_phy_add(). + */ +void sas_phy_free(struct sas_phy *phy) +{ + transport_destroy_device(&phy->dev); + put_device(phy->dev.parent); + put_device(phy->dev.parent); + put_device(phy->dev.parent); + kfree(phy); +} +EXPORT_SYMBOL(sas_phy_free); + +/** + * sas_phy_delete -- remove SAS PHY + * @phy: SAS PHY to remove + * + * Removes the specified SAS PHY. If the SAS PHY has an + * associated remote PHY it is removed before. + */ +void +sas_phy_delete(struct sas_phy *phy) +{ + struct device *dev = &phy->dev; + + if (phy->rphy) + sas_rphy_delete(phy->rphy); + + transport_remove_device(dev); + device_del(dev); + transport_destroy_device(dev); + put_device(dev->parent); +} +EXPORT_SYMBOL(sas_phy_delete); + +/** + * scsi_is_sas_phy -- check if a struct device represents a SAS PHY + * @dev: device to check + * + * Returns: + * %1 if the device represents a SAS PHY, %0 else + */ +int scsi_is_sas_phy(const struct device *dev) +{ + return dev->release == sas_phy_release; +} +EXPORT_SYMBOL(scsi_is_sas_phy); + +/* + * SAS remote PHY attributes. + */ + +#define sas_rphy_show_simple(field, name, format_string, cast) \ +static ssize_t \ +show_sas_rphy_##name(struct class_device *cdev, char *buf) \ +{ \ + struct sas_rphy *rphy = transport_class_to_rphy(cdev); \ + \ + return snprintf(buf, 20, format_string, cast rphy->field); \ +} + +#define sas_rphy_simple_attr(field, name, format_string, type) \ + sas_rphy_show_simple(field, name, format_string, (type)) \ +static SAS_CLASS_DEVICE_ATTR(rphy, name, S_IRUGO, \ + show_sas_rphy_##name, NULL) + +#define sas_rphy_show_protocol(field, name) \ +static ssize_t \ +show_sas_rphy_##name(struct class_device *cdev, char *buf) \ +{ \ + struct sas_rphy *rphy = transport_class_to_rphy(cdev); \ + \ + if (!rphy->field) \ + return snprintf(buf, 20, "none\n"); \ + return get_sas_protocol_names(rphy->field, buf); \ +} + +#define sas_rphy_protocol_attr(field, name) \ + sas_rphy_show_protocol(field, name) \ +static SAS_CLASS_DEVICE_ATTR(rphy, name, S_IRUGO, \ + show_sas_rphy_##name, NULL) + +static ssize_t +show_sas_rphy_device_type(struct class_device *cdev, char *buf) +{ + struct sas_rphy *rphy = transport_class_to_rphy(cdev); + + if (!rphy->identify.device_type) + return snprintf(buf, 20, "none\n"); + return get_sas_device_type_names( + rphy->identify.device_type, buf); +} + +static SAS_CLASS_DEVICE_ATTR(rphy, device_type, S_IRUGO, + show_sas_rphy_device_type, NULL); + +sas_rphy_protocol_attr(identify.initiator_port_protocols, + initiator_port_protocols); +sas_rphy_protocol_attr(identify.target_port_protocols, target_port_protocols); +sas_rphy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n", + unsigned long long); +sas_rphy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8); + +static DECLARE_TRANSPORT_CLASS(sas_rphy_class, + "sas_rphy", NULL, NULL, NULL); + +static int sas_rphy_match(struct attribute_container *cont, struct device *dev) +{ + struct Scsi_Host *shost; + struct sas_internal *i; + + if (!scsi_is_sas_rphy(dev)) + return 0; + shost = dev_to_shost(dev->parent->parent); + + if (!shost->transportt) + return 0; + if (shost->transportt->host_attrs.ac.class != + &sas_host_class.class) + return 0; + + i = to_sas_internal(shost->transportt); + return &i->rphy_attr_cont.ac == cont; +} + +static void sas_rphy_release(struct device *dev) +{ + struct sas_rphy *rphy = dev_to_rphy(dev); + + put_device(dev->parent); + kfree(rphy); +} + +/** + * sas_rphy_alloc -- allocates and initialize a SAS remote PHY structure + * @parent: SAS PHY this remote PHY is conneted to + * + * Allocates an SAS remote PHY structure, connected to @parent. + * + * Returns: + * SAS PHY allocated or %NULL if the allocation failed. + */ +struct sas_rphy *sas_rphy_alloc(struct sas_phy *parent) +{ + struct Scsi_Host *shost = dev_to_shost(&parent->dev); + struct sas_rphy *rphy; + + rphy = kmalloc(sizeof(*rphy), GFP_KERNEL); + if (!rphy) { + put_device(&parent->dev); + return NULL; + } + memset(rphy, 0, sizeof(*rphy)); + + device_initialize(&rphy->dev); + rphy->dev.parent = get_device(&parent->dev); + rphy->dev.release = sas_rphy_release; + sprintf(rphy->dev.bus_id, "rphy-%d:%d", + shost->host_no, parent->number); + transport_setup_device(&rphy->dev); + + return rphy; +} +EXPORT_SYMBOL(sas_rphy_alloc); + +/** + * sas_rphy_add -- add a SAS remote PHY to the device hierachy + * @rphy: The remote PHY to be added + * + * Publishes a SAS remote PHY to the rest of the system. + */ +int sas_rphy_add(struct sas_rphy *rphy) +{ + struct sas_phy *parent = dev_to_phy(rphy->dev.parent); + struct Scsi_Host *shost = dev_to_shost(parent->dev.parent); + struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); + struct sas_identify *identify = &rphy->identify; + int error; + + if (parent->rphy) + return -ENXIO; + parent->rphy = rphy; + + error = device_add(&rphy->dev); + if (error) + return error; + transport_add_device(&rphy->dev); + transport_configure_device(&rphy->dev); + + spin_lock(&sas_host->lock); + list_add_tail(&rphy->list, &sas_host->rphy_list); + if (identify->device_type == SAS_END_DEVICE && + (identify->target_port_protocols & + (SAS_PROTOCOL_SSP|SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA))) + rphy->scsi_target_id = sas_host->next_target_id++; + else + rphy->scsi_target_id = -1; + spin_unlock(&sas_host->lock); + + if (rphy->scsi_target_id != -1) { + scsi_scan_target(&rphy->dev, parent->number, + rphy->scsi_target_id, ~0, 0); + } + + return 0; +} +EXPORT_SYMBOL(sas_rphy_add); + +/** + * sas_rphy_free -- free a SAS remote PHY + * @rphy SAS remote PHY to free + * + * Frees the specified SAS remote PHY. + * + * Note: + * This function must only be called on a remote + * PHY that has not sucessfully been added using + * sas_rphy_add(). + */ +void sas_rphy_free(struct sas_rphy *rphy) +{ + struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); + struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); + + spin_lock(&sas_host->lock); + list_del(&rphy->list); + spin_unlock(&sas_host->lock); + + transport_destroy_device(&rphy->dev); + put_device(rphy->dev.parent); + put_device(rphy->dev.parent); + put_device(rphy->dev.parent); + kfree(rphy); +} +EXPORT_SYMBOL(sas_rphy_free); + +/** + * sas_rphy_delete -- remove SAS remote PHY + * @rphy: SAS remote PHY to remove + * + * Removes the specified SAS remote PHY. + */ +void +sas_rphy_delete(struct sas_rphy *rphy) +{ + struct device *dev = &rphy->dev; + struct sas_phy *parent = dev_to_phy(dev->parent); + struct Scsi_Host *shost = dev_to_shost(parent->dev.parent); + struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); + + transport_destroy_device(&rphy->dev); + + scsi_remove_target(&rphy->dev); + + spin_lock(&sas_host->lock); + list_del(&rphy->list); + spin_unlock(&sas_host->lock); + + transport_remove_device(dev); + device_del(dev); + transport_destroy_device(dev); + put_device(&parent->dev); +} +EXPORT_SYMBOL(sas_rphy_delete); + +/** + * scsi_is_sas_rphy -- check if a struct device represents a SAS remote PHY + * @dev: device to check + * + * Returns: + * %1 if the device represents a SAS remote PHY, %0 else + */ +int scsi_is_sas_rphy(const struct device *dev) +{ + return dev->release == sas_rphy_release; +} +EXPORT_SYMBOL(scsi_is_sas_rphy); + + +/* + * SCSI scan helper + */ + +static struct device *sas_target_parent(struct Scsi_Host *shost, + int channel, uint id) +{ + struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); + struct sas_rphy *rphy; + struct device *dev = NULL; + + spin_lock(&sas_host->lock); + list_for_each_entry(rphy, &sas_host->rphy_list, list) { + struct sas_phy *parent = dev_to_phy(rphy->dev.parent); + if (parent->number == channel && + rphy->scsi_target_id == id) + dev = &rphy->dev; + } + spin_unlock(&sas_host->lock); + + return dev; +} + + +/* + * Setup / Teardown code + */ + +#define SETUP_RPORT_ATTRIBUTE(field) \ + i->private_rphy_attrs[count] = class_device_attr_##field; \ + i->private_rphy_attrs[count].attr.mode = S_IRUGO; \ + i->private_rphy_attrs[count].store = NULL; \ + i->rphy_attrs[count] = &i->private_rphy_attrs[count]; \ + count++ + +#define SETUP_PORT_ATTRIBUTE(field) \ + i->private_phy_attrs[count] = class_device_attr_##field; \ + i->private_phy_attrs[count].attr.mode = S_IRUGO; \ + i->private_phy_attrs[count].store = NULL; \ + i->phy_attrs[count] = &i->private_phy_attrs[count]; \ + count++ + + +/** + * sas_attach_transport -- instantiate SAS transport template + * @ft: SAS transport class function template + */ +struct scsi_transport_template * +sas_attach_transport(struct sas_function_template *ft) +{ + struct sas_internal *i; + int count; + + i = kmalloc(sizeof(struct sas_internal), GFP_KERNEL); + if (!i) + return NULL; + memset(i, 0, sizeof(struct sas_internal)); + + i->t.target_parent = sas_target_parent; + + i->t.host_attrs.ac.attrs = &i->host_attrs[0]; + i->t.host_attrs.ac.class = &sas_host_class.class; + i->t.host_attrs.ac.match = sas_host_match; + transport_container_register(&i->t.host_attrs); + i->t.host_size = sizeof(struct sas_host_attrs); + + i->phy_attr_cont.ac.class = &sas_phy_class.class; + i->phy_attr_cont.ac.attrs = &i->phy_attrs[0]; + i->phy_attr_cont.ac.match = sas_phy_match; + transport_container_register(&i->phy_attr_cont); + + i->rphy_attr_cont.ac.class = &sas_rphy_class.class; + i->rphy_attr_cont.ac.attrs = &i->rphy_attrs[0]; + i->rphy_attr_cont.ac.match = sas_rphy_match; + transport_container_register(&i->rphy_attr_cont); + + i->f = ft; + + count = 0; + i->host_attrs[count] = NULL; + + count = 0; + SETUP_PORT_ATTRIBUTE(initiator_port_protocols); + SETUP_PORT_ATTRIBUTE(target_port_protocols); + SETUP_PORT_ATTRIBUTE(device_type); + SETUP_PORT_ATTRIBUTE(sas_address); + SETUP_PORT_ATTRIBUTE(phy_identifier); + SETUP_PORT_ATTRIBUTE(port_identifier); + SETUP_PORT_ATTRIBUTE(negotiated_linkrate); + SETUP_PORT_ATTRIBUTE(minimum_linkrate_hw); + SETUP_PORT_ATTRIBUTE(minimum_linkrate); + SETUP_PORT_ATTRIBUTE(maximum_linkrate_hw); + SETUP_PORT_ATTRIBUTE(maximum_linkrate); + i->phy_attrs[count] = NULL; + + count = 0; + SETUP_RPORT_ATTRIBUTE(rphy_initiator_port_protocols); + SETUP_RPORT_ATTRIBUTE(rphy_target_port_protocols); + SETUP_RPORT_ATTRIBUTE(rphy_device_type); + SETUP_RPORT_ATTRIBUTE(rphy_sas_address); + SETUP_RPORT_ATTRIBUTE(rphy_phy_identifier); + i->rphy_attrs[count] = NULL; + + return &i->t; +} +EXPORT_SYMBOL(sas_attach_transport); + +/** + * sas_release_transport -- release SAS transport template instance + * @t: transport template instance + */ +void sas_release_transport(struct scsi_transport_template *t) +{ + struct sas_internal *i = to_sas_internal(t); + + transport_container_unregister(&i->t.host_attrs); + transport_container_unregister(&i->phy_attr_cont); + transport_container_unregister(&i->rphy_attr_cont); + + kfree(i); +} +EXPORT_SYMBOL(sas_release_transport); + +static __init int sas_transport_init(void) +{ + int error; + + error = transport_class_register(&sas_host_class); + if (error) + goto out; + error = transport_class_register(&sas_phy_class); + if (error) + goto out_unregister_transport; + error = transport_class_register(&sas_rphy_class); + if (error) + goto out_unregister_phy; + + return 0; + + out_unregister_phy: + transport_class_unregister(&sas_phy_class); + out_unregister_transport: + transport_class_unregister(&sas_host_class); + out: + return error; + +} + +static void __exit sas_transport_exit(void) +{ + transport_class_unregister(&sas_host_class); + transport_class_unregister(&sas_phy_class); + transport_class_unregister(&sas_rphy_class); +} + +MODULE_AUTHOR("Christoph Hellwig"); +MODULE_DESCRIPTION("SAS Transphy Attributes"); +MODULE_LICENSE("GPL"); + +module_init(sas_transport_init); +module_exit(sas_transport_exit); diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h new file mode 100644 index 00000000000..bc4aeb660dd --- /dev/null +++ b/include/scsi/scsi_transport_sas.h @@ -0,0 +1,100 @@ +#ifndef SCSI_TRANSPORT_SAS_H +#define SCSI_TRANSPORT_SAS_H + +#include <linux/transport_class.h> +#include <linux/types.h> + +struct scsi_transport_template; +struct sas_rphy; + + +enum sas_device_type { + SAS_PHY_UNUSED, + SAS_END_DEVICE, + SAS_EDGE_EXPANDER_DEVICE, + SAS_FANOUT_EXPANDER_DEVICE, +}; + +enum sas_protocol { + SAS_PROTOCOL_SATA = 0x01, + SAS_PROTOCOL_SMP = 0x02, + SAS_PROTOCOL_STP = 0x04, + SAS_PROTOCOL_SSP = 0x08, +}; + +enum sas_linkrate { + SAS_LINK_RATE_UNKNOWN, + SAS_PHY_DISABLED, + SAS_LINK_RATE_FAILED, + SAS_SATA_SPINUP_HOLD, + SAS_SATA_PORT_SELECTOR, + SAS_LINK_RATE_1_5_GBPS, + SAS_LINK_RATE_3_0_GBPS, + SAS_LINK_VIRTUAL, +}; + +struct sas_identify { + enum sas_device_type device_type; + enum sas_protocol initiator_port_protocols; + enum sas_protocol target_port_protocols; + u64 sas_address; + u8 phy_identifier; +}; + +/* The functions by which the transport class and the driver communicate */ +struct sas_function_template { +}; + +struct sas_phy { + struct device dev; + int number; + struct sas_identify identify; + enum sas_linkrate negotiated_linkrate; + enum sas_linkrate minimum_linkrate_hw; + enum sas_linkrate minimum_linkrate; + enum sas_linkrate maximum_linkrate_hw; + enum sas_linkrate maximum_linkrate; + u8 port_identifier; + struct sas_rphy *rphy; +}; + +#define dev_to_phy(d) \ + container_of((d), struct sas_phy, dev) +#define transport_class_to_phy(cdev) \ + dev_to_phy((cdev)->dev) +#define phy_to_shost(phy) \ + dev_to_shost((phy)->dev.parent) + +struct sas_rphy { + struct device dev; + struct sas_identify identify; + struct list_head list; + u32 scsi_target_id; +}; + +#define dev_to_rphy(d) \ + container_of((d), struct sas_rphy, dev) +#define transport_class_to_rphy(cdev) \ + dev_to_rphy((cdev)->dev) +#define rphy_to_shost(rphy) \ + dev_to_shost((rphy)->dev.parent) + +extern void sas_remove_host(struct Scsi_Host *); + +extern struct sas_phy *sas_phy_alloc(struct device *, int); +extern void sas_phy_free(struct sas_phy *); +extern int sas_phy_add(struct sas_phy *); +extern void sas_phy_delete(struct sas_phy *); +extern int scsi_is_sas_phy(const struct device *); + +extern struct sas_rphy *sas_rphy_alloc(struct sas_phy *); +void sas_rphy_free(struct sas_rphy *); +extern int sas_rphy_add(struct sas_rphy *); +extern void sas_rphy_delete(struct sas_rphy *); +extern int scsi_is_sas_rphy(const struct device *); + +extern struct scsi_transport_template * +sas_attach_transport(struct sas_function_template *); +extern void sas_release_transport(struct scsi_transport_template *); + +#endif /* SCSI_TRANSPORT_SAS_H */ |