diff options
| -rw-r--r-- | drivers/net/e1000e/e1000.h | 3 | ||||
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 86 | ||||
| -rw-r--r-- | drivers/net/e1000e/netdev.c | 5 |
3 files changed, 79 insertions, 15 deletions
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 9549879e66a..f8cd56a1ade 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -533,7 +533,8 @@ extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, bool state); extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw); -extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw); +extern void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw); +extern void e1000_resume_workarounds_pchlan(struct e1000_hw *hw); extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable); extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 3369d1f6a39..dcd5db5e34e 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -275,6 +275,19 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) #define ew16flash(reg,val) __ew16flash(hw, (reg), (val)) #define ew32flash(reg,val) __ew32flash(hw, (reg), (val)) +static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw) +{ + u32 ctrl; + + ctrl = er32(CTRL); + ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; + ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; + ew32(CTRL, ctrl); + udelay(10); + ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE; + ew32(CTRL, ctrl); +} + /** * e1000_init_phy_params_pchlan - Initialize PHY function pointers * @hw: pointer to the HW structure @@ -284,7 +297,7 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - u32 ctrl, fwsm; + u32 fwsm; s32 ret_val = 0; phy->addr = 1; @@ -308,13 +321,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) */ fwsm = er32(FWSM); if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) { - ctrl = er32(CTRL); - ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; - ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; - ew32(CTRL, ctrl); - udelay(10); - ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE; - ew32(CTRL, ctrl); + e1000_toggle_lanphypc_value_ich8lan(hw); msleep(50); /* @@ -3586,17 +3593,16 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) } /** - * e1000e_disable_gig_wol_ich8lan - disable gig during WoL + * e1000_suspend_workarounds_ich8lan - workarounds needed during S0->Sx * @hw: pointer to the HW structure * * During S0 to Sx transition, it is possible the link remains at gig * instead of negotiating to a lower speed. Before going to Sx, set * 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation - * to a lower speed. - * - * Should only be called for applicable parts. + * to a lower speed. For PCH and newer parts, the OEM bits PHY register + * (LED, GbE disable and LPLU configurations) also needs to be written. **/ -void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) +void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) { u32 phy_ctrl; s32 ret_val; @@ -3616,6 +3622,60 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) } /** + * e1000_resume_workarounds_pchlan - workarounds needed during Sx->S0 + * @hw: pointer to the HW structure + * + * During Sx to S0 transitions on non-managed devices or managed devices + * on which PHY resets are not blocked, if the PHY registers cannot be + * accessed properly by the s/w toggle the LANPHYPC value to power cycle + * the PHY. + **/ +void e1000_resume_workarounds_pchlan(struct e1000_hw *hw) +{ + u32 fwsm; + + if (hw->mac.type != e1000_pch2lan) + return; + + fwsm = er32(FWSM); + if (!(fwsm & E1000_ICH_FWSM_FW_VALID) || !e1000_check_reset_block(hw)) { + u16 phy_id1, phy_id2; + s32 ret_val; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) { + e_dbg("Failed to acquire PHY semaphore in resume\n"); + return; + } + + /* Test access to the PHY registers by reading the ID regs */ + ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1); + if (ret_val) + goto release; + ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2); + if (ret_val) + goto release; + + if (hw->phy.id == ((u32)(phy_id1 << 16) | + (u32)(phy_id2 & PHY_REVISION_MASK))) + goto release; + + e1000_toggle_lanphypc_value_ich8lan(hw); + + hw->phy.ops.release(hw); + msleep(50); + e1000_phy_hw_reset(hw); + msleep(50); + return; + } + +release: + hw->phy.ops.release(hw); + + return; +} + +/** * e1000_cleanup_led_ich8lan - Restore the default LED operation * @hw: pointer to the HW structure * diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 888bd9cc271..c4a23c7ac17 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -5278,7 +5278,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, } if (adapter->flags & FLAG_IS_ICH) - e1000e_disable_gig_wol_ich8lan(&adapter->hw); + e1000_suspend_workarounds_ich8lan(&adapter->hw); /* Allow time for pending master requests to run */ e1000e_disable_pcie_master(&adapter->hw); @@ -5429,6 +5429,9 @@ static int __e1000_resume(struct pci_dev *pdev) return err; } + if (hw->mac.type == e1000_pch2lan) + e1000_resume_workarounds_pchlan(&adapter->hw); + e1000e_power_up_phy(adapter); /* report the system wakeup cause from S3/S4 */ |