diff options
367 files changed, 4088 insertions, 2764 deletions
diff --git a/Documentation/ABI/testing/sysfs-kernel-uids b/Documentation/ABI/testing/sysfs-kernel-uids new file mode 100644 index 00000000000..648d65dbc0e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-uids @@ -0,0 +1,14 @@ +What: /sys/kernel/uids/<uid>/cpu_shares +Date: December 2007 +Contact: Dhaval Giani <dhaval@linux.vnet.ibm.com> + Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> +Description: + The /sys/kernel/uids/<uid>/cpu_shares tunable is used + to set the cpu bandwidth a user is allowed. This is a + propotional value. What that means is that if there + are two users logged in, each with an equal number of + shares, then they will get equal CPU bandwidth. Another + example would be, if User A has shares = 1024 and user + B has shares = 2048, User B will get twice the CPU + bandwidth user A will. For more details refer + Documentation/sched-design-CFS.txt diff --git a/Documentation/i2c/summary b/Documentation/i2c/summary index 003c7319b8c..13ab076dcd9 100644 --- a/Documentation/i2c/summary +++ b/Documentation/i2c/summary @@ -1,5 +1,3 @@ -This is an explanation of what i2c is, and what is supported in this package. - I2C and SMBus ============= @@ -33,52 +31,17 @@ When we talk about I2C, we use the following terms: Client An Algorithm driver contains general code that can be used for a whole class -of I2C adapters. Each specific adapter driver depends on one algorithm -driver. +of I2C adapters. Each specific adapter driver either depends on one algorithm +driver, or includes its own implementation. A Driver driver (yes, this sounds ridiculous, sorry) contains the general code to access some type of device. Each detected device gets its own data in the Client structure. Usually, Driver and Client are more closely integrated than Algorithm and Adapter. -For a given configuration, you will need a driver for your I2C bus (usually -a separate Adapter and Algorithm driver), and drivers for your I2C devices -(usually one driver for each device). There are no I2C device drivers -in this package. See the lm_sensors project http://www.lm-sensors.nu -for device drivers. +For a given configuration, you will need a driver for your I2C bus, and +drivers for your I2C devices (usually one driver for each device). At this time, Linux only operates I2C (or SMBus) in master mode; you can't use these APIs to make a Linux system behave as a slave/device, either to speak a custom protocol or to emulate some other device. - - -Included Bus Drivers -==================== -Note that only stable drivers are patched into the kernel by 'mkpatch'. - - -Base modules ------------- - -i2c-core: The basic I2C code, including the /proc/bus/i2c* interface -i2c-dev: The /dev/i2c-* interface -i2c-proc: The /proc/sys/dev/sensors interface for device (client) drivers - -Algorithm drivers ------------------ - -i2c-algo-bit: A bit-banging algorithm -i2c-algo-pcf: A PCF 8584 style algorithm -i2c-algo-ibm_ocp: An algorithm for the I2C device in IBM 4xx processors (NOT BUILT BY DEFAULT) - -Adapter drivers ---------------- - -i2c-elektor: Elektor ISA card (uses i2c-algo-pcf) -i2c-elv: ELV parallel port adapter (uses i2c-algo-bit) -i2c-pcf-epp: PCF8584 on a EPP parallel port (uses i2c-algo-pcf) (NOT mkpatched) -i2c-philips-par: Philips style parallel port adapter (uses i2c-algo-bit) -i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT) -i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit) -i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit) - diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO index d9d832c010e..488c77fa3aa 100644 --- a/Documentation/ja_JP/HOWTO +++ b/Documentation/ja_JP/HOWTO @@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a fork. So if you have any comments or updates for this file, please try to update the original English file first. -Last Updated: 2007/09/23 +Last Updated: 2007/11/16 ================================== ã“ã‚Œã¯ã€ -linux-2.6.23/Documentation/HOWTO +linux-2.6.24/Documentation/HOWTO ã®å’Œè¨³ã§ã™ã€‚ 翻訳団体： JF プãƒã‚¸ã‚§ã‚¯ãƒˆ < http://www.linux.or.jp/JF/ > -翻訳日： 2007/09/19 +翻訳日： 2007/11/10 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com> æ ¡æ£è€…： æ¾å€‰ã•ã‚“ <nbh--mats at nifty dot com> å°æž— é›…å…¸ã•ã‚“ (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp> @@ -110,7 +110,7 @@ Linux カーãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã¯å¹…広ã„範囲ã®ãƒ‰ã‚ュメントをå æ–°ã—ã„ドã‚ãƒ¥ãƒ¡ãƒ³ãƒˆãƒ•ã‚¡ã‚¤ãƒ«ã‚‚è¿½åŠ ã™ã‚‹ã“ã¨ã‚’勧ã‚ã¾ã™ã€‚ カーãƒãƒ«ã®å¤‰æ›´ãŒã€ã‚«ãƒ¼ãƒãƒ«ãŒãƒ¦ãƒ¼ã‚¶ç©ºé–“ã«å…¬é–‹ã—ã¦ã„るインターフェイス㮠変更を引ãèµ·ã“ã™å ´åˆã€ãã®å¤‰æ›´ã‚’説明ã™ã‚‹ãƒžãƒ‹ãƒ¥ã‚¢ãƒ«ãƒšãƒ¼ã‚¸ã®ãƒ‘ッãƒã‚„æƒ…å ± -をマニュアルページã®ãƒ¡ãƒ³ãƒ†ãƒŠ mtk-manpages@gmx.net ã«é€ã‚‹ã“ã¨ã‚’勧ã‚ã¾ +をマニュアルページã®ãƒ¡ãƒ³ãƒ†ãƒŠ mtk.manpages@gmail.com ã«é€ã‚‹ã“ã¨ã‚’勧ã‚ã¾ ã™ã€‚ 以下ã¯ã‚«ãƒ¼ãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã«å«ã¾ã‚Œã¦ã„ã‚‹èªã‚“ã§ãŠãã¹ãファイルã®ä¸€è¦§ã§ diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO index b51d7ca842b..029fca914c0 100644 --- a/Documentation/ko_KR/HOWTO +++ b/Documentation/ko_KR/HOWTO @@ -1,6 +1,6 @@ NOTE: This is a version of Documentation/HOWTO translated into korean -This document is maintained by minchan Kim < minchan.kim@gmail.com> +This document is maintained by minchan Kim <minchan.kim@gmail.com> If you find any difference between this document and the original file or a problem with the translation, please contact the maintainer of this file. @@ -14,7 +14,7 @@ try to update the original English file first. Documentation/HOWTO ì˜ í•œê¸€ 번ì—입니다. -ì—ìžï¼š 김민찬 <minchan.kim@gmail.com > +ì—ìžï¼š 김민찬 <minchan.kim@gmail.com> ê°ìˆ˜ï¼š ì´ì œì´ë¯¸ <jamee.lee@samsung.com> ================================== @@ -23,11 +23,11 @@ Documentation/HOWTO ì´ ë¬¸ì„œëŠ” ì»¤ë„ ê°œë°œì— ìžˆì–´ 가장 중요한 문서ì´ë‹¤. ì´ ë¬¸ì„œëŠ” 리눅스 ì»¤ë„ ê°œë°œìžê°€ ë˜ëŠ” 법과 리눅스 ì»¤ë„ ê°œë°œ 커뮤니티와 ì¼í•˜ëŠ” -ë²•ì„ ë‹´ê³ ìžˆë‹¤. ì»¤ë„ í”„ë¡œê·¸ëž˜ë°ì˜ê¸°ìˆ ì ì¸ ì¸¡ë©´ê³¼ ê´€ë ¨ëœ ë‚´ìš©ë“¤ì€ -í¬í•¨í•˜ì§€ ì•Šìœ¼ë ¤ê³ í•˜ì˜€ì§€ë§Œ 올바으로 ì—¬ëŸ¬ë¶„ì„ ì•ˆë‚´í•˜ëŠ” ë° ë„ì›€ì´ +ë²•ì„ ë‹´ê³ ìžˆë‹¤. ì»¤ë„ í”„ë¡œê·¸ëž˜ë°ì˜ ê¸°ìˆ ì ì¸ ì¸¡ë©´ê³¼ ê´€ë ¨ëœ ë‚´ìš©ë“¤ì€ +í¬í•¨í•˜ì§€ ì•Šìœ¼ë ¤ê³ í•˜ì˜€ì§€ë§Œ 올바른 길로 ì—¬ëŸ¬ë¶„ì„ ì•ˆë‚´í•˜ëŠ” ë°ëŠ” ë„ì›€ì´ ë 것ì´ë‹¤. -ì´ ë¬¸ì„œì—ì„œ ì˜¤ëž˜ëœ ê²ƒì„ ë°œê²¬í•˜ë©´ ë¬¸ì„œì˜ ì•„ëž˜ìª½ì— ë‚˜ì—´ëœ ë©”ì¸íŠ¸ë„ˆì—게 +ì´ ë¬¸ì„œì—ì„œ ì˜¤ëž˜ëœ ê²ƒì„ ë°œê²¬í•˜ë©´ ë¬¸ì„œì˜ ì•„ëž˜ìª½ì— ë‚˜ì—´ëœ ë©”ì¸í…Œì´ë„ˆì—게 패치를 보내달ë¼. @@ -36,12 +36,12 @@ Documentation/HOWTO ìž, ì—¬ëŸ¬ë¶„ì€ ë¦¬ëˆ…ìŠ¤ ì»¤ë„ ê°œë°œìžê°€ ë˜ëŠ” ë²•ì„ ë°°ìš°ê³ ì‹¶ì€ê°€? 아니면 ìƒì‚¬ë¡œë¶€í„°"ì´ ìž¥ì¹˜ë¥¼ 위한 리눅스 ë“œë¼ì´ë²„를 작성하시오"ë¼ëŠ” ë§ì„ -들었는가? ì´ ë¬¸ì„œëŠ” ì—¬ëŸ¬ë¶„ì´ ê²ªê²Œ ë ê³¼ì •ê³¼ 커뮤니티와 ì¼í•˜ëŠ” ë²•ì„ -조언하여 ì—¬ëŸ¬ë¶„ì˜ ëª©ì ì„ ë‹¬ì„±í•˜ê¸° 위해 필요한 것 모ë‘를 ì•Œë ¤ì£¼ëŠ” -것ì´ë‹¤. +들었는가? ì´ ë¬¸ì„œì˜ ëª©ì ì€ ì—¬ëŸ¬ë¶„ì´ ê²ªê²Œ ë ê³¼ì •ê³¼ 커뮤니티와 í˜‘ë ¥í•˜ëŠ” +ë²•ì„ ì¡°ì–¸í•˜ì—¬ ì—¬ëŸ¬ë¶„ì˜ ëª©ì ì„ ë‹¬ì„±í•˜ê¸° 위해 필요한 것 모ë‘를 ì•Œë ¤ì£¼ê¸° +위함ì´ë‹¤. -커ë„ì€ ëŒ€ë¶€ë¶„ì€ Cë¡œ 작성ë˜ì—ˆì–´ê³ 몇몇 아키í…ì³ì˜ ì˜ì¡´ì ì¸ ë¶€ë¶„ì€ -어셈블리로 작성ë˜ì—ˆë‹¤. ì»¤ë„ ê°œë°œì„ ìœ„í•´ C를 잘 ì´í•´í•˜ê³ 있어야 한다. +커ë„ì€ ëŒ€ë¶€ë¶„ì€ Cë¡œ 작성ë˜ì–´ ìžˆê³ ëª‡ëª‡ 아키í…ì³ì˜ ì˜ì¡´ì ì¸ ë¶€ë¶„ì€ +어셈블리로 작성ë˜ì–´ 있다. ì»¤ë„ ê°œë°œì„ ìœ„í•´ C를 잘 ì´í•´í•˜ê³ 있어야 한다. ì—¬ëŸ¬ë¶„ì´ íŠ¹ì • 아키í…ì³ì˜ low-level ê°œë°œì„ í• ê²ƒì´ ì•„ë‹ˆë¼ë©´ 어셈블리(íŠ¹ì • 아키í…ì³)는 잘 알아야 í• í•„ìš”ëŠ” 없다. 다ìŒì˜ ì°¸ê³ ì„œì ë“¤ì€ ê¸°ë³¸ì— ì¶©ì‹¤í•œ C êµìœ¡ì´ë‚˜ ìˆ˜ë…„ê°„ì˜ ê²½í—˜ì— ê²¬ì£¼ì§€ëŠ” @@ -59,11 +59,11 @@ Documentation/HOWTO ì–´ë–¤ ì°¸ê³ ë¬¸ì„œë„ ìžˆì§€ 않다. ì •ë³´ë¥¼ 얻기 위해서는 gcc info (`info gcc`)페ì´ì§€ë¥¼ 살펴보ë¼. -ì—¬ëŸ¬ë¶„ì€ ê¸°ì¡´ì˜ ê°œë°œ 커뮤니티와 ì¼í•˜ëŠ” ë²•ì„ ë°°ìš°ë ¤ê³ í•˜ê³ ìžˆë‹¤ëŠ” ê²ƒì„ -기억하ë¼. 코딩, 스타ì¼, ì ˆì°¨ì— ê´€í•œ 훌ë¥í•œ í‘œì¤€ì„ ê°€ì§„ ì‚¬ëžŒë“¤ì´ ëª¨ì¸ +ì—¬ëŸ¬ë¶„ì€ ê¸°ì¡´ì˜ ê°œë°œ 커뮤니티와 í˜‘ë ¥í•˜ëŠ” ë²•ì„ ë°°ìš°ë ¤ê³ í•˜ê³ ìžˆë‹¤ëŠ” ê²ƒì„ +기억하ë¼. 코딩, 스타ì¼, í•¨ìˆ˜ì— ê´€í•œ 훌ë¥í•œ í‘œì¤€ì„ ê°€ì§„ ì‚¬ëžŒë“¤ì´ ëª¨ì¸ ë‹¤ì–‘í•œ ê·¸ë£¹ì´ ìžˆë‹¤. ì´ í‘œì¤€ë“¤ì€ ì˜¤ëžœë™ì•ˆ í¬ê³ 지ì—ì 으로 ë¶„ì‚°ëœ íŒ€ë“¤ì— -ì˜í•´ 가장 ì¢‹ì€ ë°©ë²•ìœ¼ë¡œ ì¼í•˜ê¸°ìœ„하여 ì°¾ì€ ê²ƒì„ ê¸°ì´ˆë¡œ ë§Œë“¤ì–´ì ¸ì™”ë‹¤. -ê·¸ í‘œì¤€ë“¤ì€ ë¬¸ì„œí™”ê°€ 잘 ë˜ì–´ 있기 ë•Œë¬¸ì— ê°€ëŠ¥í•œí•œ 미리 ë§Žì€ í‘œì¤€ë“¤ì— +ì˜í•´ 가장 ì¢‹ì€ ë°©ë²•ìœ¼ë¡œ ì¼í•˜ê¸° 위하여 ì°¾ì€ ê²ƒì„ ê¸°ì´ˆë¡œ ë§Œë“¤ì–´ì ¸ 왔다. +ê·¸ í‘œì¤€ë“¤ì€ ë¬¸ì„œí™”ê°€ 잘 ë˜ì–´ìžˆê¸° ë•Œë¬¸ì— ê°€ëŠ¥í•œí•œ 미리 ë§Žì€ í‘œì¤€ë“¤ì— ê´€í•˜ì—¬ ë°°ìš°ë ¤ê³ ì‹œë„하ë¼. 다른 ì‚¬ëžŒë“¤ì€ ì—¬ëŸ¬ë¶„ì´ë‚˜ ì—¬ëŸ¬ë¶„ì˜ íšŒì‚¬ê°€ ì¼í•˜ëŠ” ë°©ì‹ì— ì ì‘하는 ê²ƒì„ ì›í•˜ì§€ëŠ” 않는다. @@ -73,7 +73,7 @@ Documentation/HOWTO 리눅스 ì»¤ë„ ì†ŒìŠ¤ 코드는 GPLë¡œ ë°°í¬(release)ë˜ì—ˆë‹¤. ì†ŒìŠ¤íŠ¸ë¦¬ì˜ ë©”ì¸ ë””ë ‰í† ë¦¬ì— ìžˆëŠ” ë¼ì´ì„¼ìŠ¤ì— 관하여 ìƒì„¸í•˜ê²Œ ì“°ì—¬ 있는 COPYINGì´ë¼ëŠ” -파ì¼ì„ ë´ë¼.ì—¬ëŸ¬ë¶„ì´ ë¼ì´ì„¼ìŠ¤ì— 관한 ë” ê¹Šì€ ë¬¸ì œë¥¼ ê°€ì§€ê³ ìžˆë‹¤ë©´ +파ì¼ì„ ë´ë¼. ì—¬ëŸ¬ë¶„ì´ ë¼ì´ì„¼ìŠ¤ì— 관한 ë” ê¹Šì€ ë¬¸ì œë¥¼ ê°€ì§€ê³ ìžˆë‹¤ë©´ 리눅스 ì»¤ë„ ë©”ì¼ë§ ë¦¬ìŠ¤íŠ¸ì— ë¬»ì§€ë§ê³ 변호사와 ì—°ë½í•˜ë¼. ë©”ì¼ë§ ë¦¬ìŠ¤íŠ¸ë“¤ì— ìžˆëŠ” ì‚¬ëžŒë“¤ì€ ë³€í˜¸ì‚¬ê°€ 아니기 ë•Œë¬¸ì— ë²•ì ë¬¸ì œì— ê´€í•˜ì—¬ ê·¸ë“¤ì˜ ë§ì— ì˜ì§€í•´ì„œëŠ” 안ëœë‹¤. @@ -85,12 +85,12 @@ GPLì— ê´€í•œ ìž¦ì€ ì§ˆë¬¸ë“¤ê³¼ ë‹µë³€ë“¤ì€ ë‹¤ìŒì„ 참조하ë¼. 문서 ---- -리눅스 ì»¤ë„ ì†ŒìŠ¤ 트리는 ì»¤ë„ ì»¤ë®¤ë‹ˆí‹°ì™€ ì¼í•˜ëŠ” ë²•ì„ ë°°ìš°ê¸° 위한 ë§Žì€ -귀중한 ë¬¸ì„œë“¤ì„ ê°€ì§€ê³ ìžˆë‹¤. 새로운 ê¸°ëŠ¥ë“¤ì´ ì»¤ë„ì— ë“¤ì–´ê°€ê²Œ ë ë•Œ, +리눅스 ì»¤ë„ ì†ŒìŠ¤ 트리는 ì»¤ë„ ì»¤ë®¤ë‹ˆí‹°ì™€ í˜‘ë ¥í•˜ëŠ” ë²•ì„ ë°°ìš°ê¸°ìœ„í•´ 훌ë¥í•œ +다양한 ë¬¸ì„œë“¤ì„ ê°€ì§€ê³ ìžˆë‹¤. 새로운 ê¸°ëŠ¥ë“¤ì´ ì»¤ë„ì— ë“¤ì–´ê°€ê²Œ ë ë•Œ, ê·¸ ê¸°ëŠ¥ì„ ì–´ë–»ê²Œ ì‚¬ìš©í•˜ëŠ”ì§€ì— ê´€í•œ ì„¤ëª…ì„ ìœ„í•˜ì—¬ 새로운 문서 파ì¼ì„ 추가하는 ê²ƒì„ ê¶Œìž¥í•œë‹¤. 커ë„ì´ ìœ ì €ìŠ¤íŽ˜ì´ìŠ¤ë¡œ 노출하는 ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ 변경하게 ë˜ë©´ ë³€ê²½ì„ ì„¤ëª…í•˜ëŠ” 메뉴얼 페ì´ì§€ë“¤ì— 대한 패치나 ì •ë³´ë¥¼ -mtk-manpages@gmx.netì˜ ë©”ì¸íŠ¸ë„ˆì—게 보낼 ê²ƒì„ ê¶Œìž¥í•œë‹¤. +mtk.manpages@gmail.comì˜ ë©”ì¸í…Œì´ë„ˆì—게 보낼 ê²ƒì„ ê¶Œìž¥í•œë‹¤. 다ìŒì€ ì»¤ë„ ì†ŒìŠ¤ íŠ¸ë¦¬ì— ìžˆëŠ” ì½ì–´ì•¼ í• íŒŒì¼ë“¤ì˜ 리스트ì´ë‹¤. README @@ -105,7 +105,7 @@ mtk-manpages@gmx.netì˜ ë©”ì¸íŠ¸ë„ˆì—게 보낼 ê²ƒì„ ê¶Œìž¥í•œë‹¤. Documentation/CodingStyle ì´ ë¬¸ì„œëŠ” 리눅스 ì»¤ë„ ì½”ë”© 스타ì¼ê³¼ ê·¸ë ‡ê²Œ í•œ 몇몇 ì´ìœ 를 설명한다. ëª¨ë“ ìƒˆë¡œìš´ 코드는 ì´ ë¬¸ì„œì— ê°€ì´ë“œë¼ì¸ë“¤ì„ ë”°ë¼ì•¼ 한다. ëŒ€ë¶€ë¶„ì˜ - ë©”ì¸íŠ¸ë„ˆë“¤ì€ ì´ ê·œì¹™ì„ ë”°ë¥´ëŠ” íŒ¨ì¹˜ë“¤ë§Œì„ ë°›ì•„ë“¤ì¼ ê²ƒì´ê³ ë§Žì€ ì‚¬ëžŒë“¤ì´ + ë©”ì¸í…Œì´ë„ˆë“¤ì€ ì´ ê·œì¹™ì„ ë”°ë¥´ëŠ” íŒ¨ì¹˜ë“¤ë§Œì„ ë°›ì•„ë“¤ì¼ ê²ƒì´ê³ ë§Žì€ ì‚¬ëžŒë“¤ì´ ê·¸ 패치가 올바른 스타ì¼ì¼ 경우만 코드를 ê²€í† í• ê²ƒì´ë‹¤. Documentation/SubmittingPatches @@ -115,9 +115,10 @@ mtk-manpages@gmx.netì˜ ë©”ì¸íŠ¸ë„ˆì—게 보낼 ê²ƒì„ ê¶Œìž¥í•œë‹¤. - Email 내용들 - Email ì–‘ì‹ - ê·¸ê²ƒì„ ëˆ„êµ¬ì—게 보낼지 - ì´ëŸ¬í•œ ê·œì¹™ë“¤ì„ ë”°ë¥´ëŠ” ê²ƒì´ ì„±ê³µì„ ë³´ìž¥í•˜ì§„ 않는다(왜ëƒí•˜ë©´ ëª¨ë“ - íŒ¨ì¹˜ë“¤ì€ ë‚´ìš©ê³¼ 스타ì¼ì— 관하여 면밀히 ê²€í† ë˜ê¸° 때문ì´ë‹¤). - 그러나 ê·œì¹™ì„ ë”°ë¥´ì§€ 않는다면 ê±°ì˜ ì„±ê³µí•˜ì§€ë„ ëª»í• ê²ƒì´ë‹¤. + ì´ëŸ¬í•œ ê·œì¹™ë“¤ì„ ë”°ë¥´ëŠ” ê²ƒì´ ì„±ê³µ(ì—ìžì£¼: 패치가 받아들여 지는 것)ì„ + 보장하진 않는다(왜ëƒí•˜ë©´ ëª¨ë“ íŒ¨ì¹˜ë“¤ì€ ë‚´ìš©ê³¼ 스타ì¼ì— 관하여 + 면밀히 ê²€í† ë˜ê¸° 때문ì´ë‹¤). 그러나 ê·œì¹™ì„ ë”°ë¥´ì§€ 않는다면 ê±°ì˜ + ì„±ê³µí•˜ì§€ë„ ëª»í• ê²ƒì´ë‹¤. 올바른 íŒ¨ì¹˜ë“¤ì„ ë§Œë“œëŠ” ë²•ì— ê´€í•œ 훌ë¥í•œ 다른 ë¬¸ì„œë“¤ì´ ìžˆë‹¤. "The Perfect Patch" @@ -126,13 +127,13 @@ mtk-manpages@gmx.netì˜ ë©”ì¸íŠ¸ë„ˆì—게 보낼 ê²ƒì„ ê¶Œìž¥í•œë‹¤. http://linux.yyz.us/patch-format.html Documentation/stable_api_nonsense.txt - ì´ ë¬¸ì„œëŠ” ì˜ë„ì 으로 커ë„ì´ ë³€í•˜ì§€ 않는 API를 갖지 ì•Šë„ë¡ ê²°ì •í•œ + ì´ ë¬¸ì„œëŠ” ì˜ë„ì 으로 커ë„ì´ ë¶ˆë³€í•˜ëŠ” API를 갖지 ì•Šë„ë¡ ê²°ì •í•œ ì´ìœ 를 설명하며 다ìŒê³¼ ê°™ì€ ê²ƒë“¤ì„ í¬í•¨í•œë‹¤. - 서브시스템 shim-layer(í˜¸í™˜ì„±ì„ ìœ„í•´?) - - ìš´ì˜ ì²´ì œë“¤ ê°„ì˜ ë“œë¼ì´ë²„ ì´ì‹ì„± + - ìš´ì˜ì²´ì œë“¤ê°„ì˜ ë“œë¼ì´ë²„ ì´ì‹ì„± - ì»¤ë„ ì†ŒìŠ¤ íŠ¸ë¦¬ë‚´ì— ë¹ ë¥¸ 변화를 늦추는 것(ë˜ëŠ” ë¹ ë¥¸ 변화를 막는 것) ì´ ë¬¸ì„œëŠ” 리눅스 개발 ì² í•™ì„ ì´í•´í•˜ëŠ”ë° í•„ìˆ˜ì ì´ë©° 다른 ìš´ì˜ì²´ì œì—ì„œ - 리눅스로 옮겨오는 사람들ì—게는 매우 중요하다. + 리눅스로 ì „í–¥í•˜ëŠ” 사람들ì—게는 매우 중요하다. Documentation/SecurityBugs @@ -141,10 +142,10 @@ mtk-manpages@gmx.netì˜ ë©”ì¸íŠ¸ë„ˆì—게 보낼 ê²ƒì„ ê¶Œìž¥í•œë‹¤. ë„와 달ë¼. Documentation/ManagementStyle - ì´ ë¬¸ì„œëŠ” 리눅스 ì»¤ë„ ë©”ì¸íŠ¸ë„ˆë“¤ì´ 어떻게 ê·¸ë“¤ì˜ ë°©ë²•ë¡ ì˜ ì •ì‹ ì„ - 어떻게 ê³µìœ í•˜ê³ ìš´ì˜í•˜ëŠ”지를 설명한다. ì´ê²ƒì€ ì»¤ë„ ê°œë°œì— ìž…ë¬¸í•˜ëŠ” + ì´ ë¬¸ì„œëŠ” 리눅스 ì»¤ë„ ë©”ì¸í…Œì´ë„ˆë“¤ì´ ê·¸ë“¤ì˜ ë°©ë²•ë¡ ì— ë…¹ì•„ 있는 + ì •ì‹ ì„ ì–´ë–»ê²Œ ê³µìœ í•˜ê³ ìš´ì˜í•˜ëŠ”지를 설명한다. ì´ê²ƒì€ ì»¤ë„ ê°œë°œì— ìž…ë¬¸í•˜ëŠ” ëª¨ë“ ì‚¬ëžŒë“¤(ë˜ëŠ” ì»¤ë„ ê°œë°œì— ìž‘ì€ í˜¸ê¸°ì‹¬ì´ë¼ë„ 있는 사람들)ì´ - ì½ì–´ì•¼ í• ì¤‘ìš”í•œ 문서ì´ë‹¤. 왜ëƒí•˜ë©´ ì´ ë¬¸ì„œëŠ” ì»¤ë„ ë©”ì¸íŠ¸ë„ˆë“¤ì˜ + ì½ì–´ì•¼ í• ì¤‘ìš”í•œ 문서ì´ë‹¤. 왜ëƒí•˜ë©´ ì´ ë¬¸ì„œëŠ” ì»¤ë„ ë©”ì¸í…Œì´ë„ˆë“¤ì˜ ë…특한 í–‰ë™ì— 관하여 í”히 있는 오해들과 í˜¼ëž€ë“¤ì„ í•´ì†Œí•˜ê³ ìžˆê¸° 때문ì´ë‹¤. @@ -160,7 +161,7 @@ mtk-manpages@gmx.netì˜ ë©”ì¸íŠ¸ë„ˆì—게 보낼 ê²ƒì„ ê¶Œìž¥í•œë‹¤. Documentation/applying-patches.txt 패치가 무엇ì´ë©° ê·¸ê²ƒì„ ì»¤ë„ì˜ ë‹¤ë¥¸ 개발 ë¸Œëžœì¹˜ë“¤ì— ì–´ë–»ê²Œ - ì ìš©í•˜ëŠ”ì§€ì— ê´€í•˜ì—¬ ìžì„¸ížˆ 설명 í•˜ê³ ìžˆëŠ” ì¢‹ì€ ìž…ë¬¸ì„œì´ë‹¤. + ì ìš©í•˜ëŠ”ì§€ì— ê´€í•˜ì—¬ ìžì„¸ížˆ ì„¤ëª…í•˜ê³ ìžˆëŠ” ì¢‹ì€ ìž…ë¬¸ì„œì´ë‹¤. 커ë„ì€ ì†ŒìŠ¤ 코드 ê·¸ ìžì²´ì—ì„œ ìžë™ì 으로 만들어질 수 있는 ë§Žì€ ë¬¸ì„œë“¤ì„ ê°€ì§€ê³ ìžˆë‹¤. ì´ê²ƒì€ ì»¤ë„ ë‚´ì˜ APIì— ëŒ€í•œ ëª¨ë“ ì„¤ëª…, ê·¸ë¦¬ê³ ë½í‚¹ì„ @@ -192,7 +193,7 @@ Documentation/DocBook/ ë””ë ‰í† ë¦¬ ë‚´ì—ì„œ 만들어지며 PDF, Postscript, H ì—¬ëŸ¬ë¶„ì´ ì–´ë””ì„œ 시작해야 í• ì§„ 모르지만 ì»¤ë„ ê°œë°œ ì»¤ë®¤ë‹ˆí‹°ì— ì°¸ì—¬í• ìˆ˜ 있는 ì¼ë“¤ì„ 찾길 ì›í•œë‹¤ë©´ 리눅스 ì»¤ë„ Janitor 프로ì 트를 살펴ë´ë¼. http://janitor.kernelnewbies.org/ -ê·¸ê³³ì€ ì‹œìž‘í•˜ê¸°ì— ì•„ì£¼ ë”± ì¢‹ì€ ê³³ì´ë‹¤. ê·¸ê³³ì€ ë¦¬ëˆ…ìŠ¤ ì»¤ë„ ì†ŒìŠ¤ íŠ¸ë¦¬ë‚´ì— +ê·¸ê³³ì€ ì‹œìž‘í•˜ê¸°ì— í›Œë¥í•œ 장소ì´ë‹¤. ê·¸ê³³ì€ ë¦¬ëˆ…ìŠ¤ ì»¤ë„ ì†ŒìŠ¤ íŠ¸ë¦¬ë‚´ì— ê°„ë‹¨ížˆ ì •ë¦¬ë˜ê³ ìˆ˜ì •ë 수 있는 ë¬¸ì œë“¤ì— ê´€í•˜ì—¬ 설명한다. ì—¬ëŸ¬ë¶„ì€ ì´ í”„ë¡œì 트를 대표하는 개발ìžë“¤ê³¼ ì¼í•˜ë©´ì„œ ìžì‹ ì˜ íŒ¨ì¹˜ë¥¼ 리눅스 ì»¤ë„ íŠ¸ë¦¬ì— ë°˜ì˜í•˜ê¸° 위한 기본ì ì¸ ê²ƒë“¤ì„ ë°°ìš°ê²Œ ë 것ì´ë©° ì—¬ëŸ¬ë¶„ì´ ì•„ì§ ì•„ì´ë””어를 @@ -212,7 +213,7 @@ Documentation/DocBook/ ë””ë ‰í† ë¦¬ ë‚´ì—ì„œ 만들어지며 PDF, Postscript, H ê²ƒì€ Linux Cross-Reference projectì´ë©° ê·¸ê²ƒì€ ìžê¸° 참조 ë°©ì‹ì´ë©° 소스코드를 ì¸ë±ìŠ¤ëœ 웹 페ì´ì§€ë“¤ì˜ 형태로 보여준다. ìµœì‹ ì˜ ë©‹ì§„ ì»¤ë„ ì½”ë“œ ì €ìž¥ì†ŒëŠ” 다ìŒì„ 통하여 ì°¸ì¡°í• ìˆ˜ 있다. - http://sosdg.org/~coywolf/lxr/ + http://users.sosdg.org/~qiyong/lxr/ 개발 프로세스 @@ -233,44 +234,45 @@ Documentation/DocBook/ ë””ë ‰í† ë¦¬ ë‚´ì—ì„œ 만들어지며 PDF, Postscript, H 2.6.x 커ë„ë“¤ì€ Linux Torvaldsê°€ 관리하며 kernel.orgì˜ pub/linux/kernel/v2.6/ ë””ë ‰í† ë¦¬ì—ì„œ 참조ë 수 있다.개발 프로세스는 다ìŒê³¼ 같다. - 새로운 커ë„ì´ ë°°í¬ë˜ìžë§ˆìž 2ì£¼ì˜ ì‹œê°„ì´ ì£¼ì–´ì§„ë‹¤. ì´ ê¸°ê°„ë™ì€ - ë©”ì¸íŠ¸ë„ˆë“¤ì€ í° diffë“¤ì„ Linusì—게 ì œì¶œí• ìˆ˜ 있다. 대개 ì´ íŒ¨ì¹˜ë“¤ì€ + ë©”ì¸í…Œì´ë„ˆë“¤ì€ í° diffë“¤ì„ Linusì—게 ì œì¶œí• ìˆ˜ 있다. 대개 ì´ íŒ¨ì¹˜ë“¤ì€ ëª‡ 주 ë™ì•ˆ -mm 커ë„ë‚´ì— ì´ë¯¸ ìžˆì—ˆë˜ ê²ƒë“¤ì´ë‹¤. í° ë³€ê²½ë“¤ì„ ì œì¶œí•˜ëŠ” ë° ì„ í˜¸ë˜ëŠ” ë°©ë²•ì€ git(커ë„ì˜ ì†ŒìŠ¤ 관리 툴, ë” ë§Žì€ ì •ë³´ë“¤ì€ http://git.or.cz/ - ì—ì„œ ì°¸ì¡°í• ìˆ˜ 있다)를 사용하는 것ì´ì§€ë§Œ 순수한 패치파ì¼ì˜ 형ì‹ìœ¼ë¡œ ë³´ë‚´ë„ + ì—ì„œ ì°¸ì¡°í• ìˆ˜ 있다)를 사용하는 것ì´ì§€ë§Œ 순수한 패치파ì¼ì˜ 형ì‹ìœ¼ë¡œ 보내는 ê²ƒë„ ë¬´ê´€í•˜ë‹¤. - 2주 í›„ì— -rc1 커ë„ì´ ë°°í¬ë˜ë©° 지금부터는 ì „ì²´ 커ë„ì˜ ì•ˆì •ì„±ì— ì˜í–¥ì„ - ë¯¸ì¹ ìˆ˜ 있는 새로운 ê¸°ëŠ¥ë“¤ì„ í¬í•¨í•˜ì§€ 않는 íŒ¨ì¹˜ë“¤ë§Œì„ ì¶”ê°€ë 수 있다. + ë¯¸ì¹ ìˆ˜ 있는 새로운 ê¸°ëŠ¥ë“¤ì„ í¬í•¨í•˜ì§€ 않는 íŒ¨ì¹˜ë“¤ë§Œì´ ì¶”ê°€ë 수 있다. ì™„ì „ížˆ 새로운 ë“œë¼ì´ë²„(í˜¹ì€ íŒŒì¼ì‹œìŠ¤í…œ)는 -rc1 ì´í›„ì—만 받아들여진다는 ê²ƒì„ ê¸°ì–µí•´ë¼. 왜ëƒí•˜ë©´ ë³€ê²½ì´ ìžì²´ë‚´ì—서만 ë°œìƒí•˜ê³ ì¶”ê°€ëœ ì½”ë“œê°€ ë“œë¼ì´ë²„ ì™¸ë¶€ì˜ ë‹¤ë¥¸ 부분ì—는 ì˜í–¥ì„ 주지 않으므로 그런 ë³€ê²½ì€ - 퇴보(regression)를 ì¼ìœ¼í‚¬ 만한 ìœ„í—˜ì„ ê°€ì§€ê³ ìžˆì§€ 않기 때문ì´ë‹¤. -rc1ì´ + 회귀(ì—ìžì£¼: ì´ì „ì—는 존재하지 않았지만 새로운 기능추가나 변경으로 ì¸í•´ + ìƒê²¨ë‚œ 버그)를 ì¼ìœ¼í‚¬ 만한 ìœ„í—˜ì„ ê°€ì§€ê³ ìžˆì§€ 않기 때문ì´ë‹¤. -rc1ì´ ë°°í¬ëœ ì´í›„ì— git를 사용하여 íŒ¨ì¹˜ë“¤ì„ Linusì—게 보낼수 있지만 íŒ¨ì¹˜ë“¤ì€ ê³µì‹ì ì¸ ë©”ì¼ë§ 리스트로 ë³´ë‚´ì„œ ê²€í† ë¥¼ ë°›ì„ í•„ìš”ê°€ 있다. - - 새로운 -rc는 Linus는 현재 git treeê°€ 테스트 í•˜ê¸°ì— ì¶©ë¶„ížˆ ì•ˆì •ëœ ìƒíƒœì— + - 새로운 -rc는 Linusê°€ 현재 git treeê°€ 테스트 í•˜ê¸°ì— ì¶©ë¶„ížˆ ì•ˆì •ëœ ìƒíƒœì— ìžˆë‹¤ê³ íŒë‹¨ë 때마다 ë°°í¬ëœë‹¤. 목표는 새로운 -rc 커ë„ì„ ë§¤ì£¼ ë°°í¬í•˜ëŠ” 것ì´ë‹¤. - - ì´ëŸ¬í•œ 프로세스는 커ë„ì´ "준비"ë˜ì—ˆë‹¤ê³ 여겨질때까지 계ì†ëœë‹¤. + - ì´ëŸ¬í•œ 프로세스는 커ë„ì´ "준비(ready)"ë˜ì—ˆë‹¤ê³ 여겨질때까지 계ì†ëœë‹¤. 프로세스는 대체로 6주간 지ì†ëœë‹¤. - - ê° -rc ë°°í¬ì— 있는 ì•Œë ¤ì§„ í‡´ë³´ì˜ ëª©ë¡ë“¤ì€ ë‹¤ìŒ URIì— ë‚¨ê²¨ì§„ë‹¤. + - ê° -rc ë°°í¬ì— 있는 ì•Œë ¤ì§„ íšŒê·€ì˜ ëª©ë¡ë“¤ì€ ë‹¤ìŒ URIì— ë‚¨ê²¨ì§„ë‹¤. http://kernelnewbies.org/known_regressions ì»¤ë„ ë°°í¬ì— 있어서 ì–¸ê¸‰í• ë§Œí•œ 가치가 있는 리눅스 ì»¤ë„ ë©”ì¼ë§ ë¦¬ìŠ¤íŠ¸ì˜ Andrew Mortonì˜ ê¸€ì´ ìžˆë‹¤. - "커ë„ì´ ì–¸ì œ ë°°í¬ë 지는 아무로 모른다. 왜ëƒí•˜ë©´ ë°°í¬ëŠ” ì•Œë ¤ì§„ + "커ë„ì´ ì–¸ì œ ë°°í¬ë 지는 ì•„ë¬´ë„ ëª¨ë¥¸ë‹¤. 왜ëƒí•˜ë©´ ë°°í¬ëŠ” ì•Œë ¤ì§„ ë²„ê·¸ì˜ ìƒí™©ì— ë”°ë¼ ë°°í¬ë˜ëŠ” 것ì´ì§€ ë¯¸ë¦¬ì •í•´ ë†“ì€ ì‹œê°„ì— ë”°ë¼ - ë°°í¬ë˜ëŠ” ê²ƒì€ ì•„ë‹ˆê¸° 때문ì´ë‹¤." + ë°°í¬ë˜ëŠ” ê²ƒì€ ì•„ë‹ˆê¸° 때문ì´ë‹¤." 2.6.x.y - ì•ˆì • ì»¤ë„ íŠ¸ë¦¬ ------------------------ 4 ìžë¦¬ 숫ìžë¡œ ì´ë£¨ì–´ì§„ ë²„ì ¼ì˜ ì»¤ë„ë“¤ì€ -stable 커ë„들ì´ë‹¤. ê·¸ê²ƒë“¤ì€ 2.6.x -커ë„ì—ì„œ ë°œê²¬ëœ í° í‡´ë³´ë“¤ì´ë‚˜ 보안 ë¬¸ì œë“¤ 중 비êµì ìž‘ê³ ì¤‘ìš”í•œ ìˆ˜ì •ë“¤ì„ +커ë„ì—ì„œ ë°œê²¬ëœ í° íšŒê·€ë“¤ì´ë‚˜ 보안 ë¬¸ì œë“¤ 중 비êµì ìž‘ê³ ì¤‘ìš”í•œ ìˆ˜ì •ë“¤ì„ í¬í•¨í•œë‹¤. ì´ê²ƒì€ 가장 ìµœê·¼ì˜ ì•ˆì •ì ì¸ ì»¤ë„ì„ ì›í•˜ëŠ” 사용ìžì—게 추천ë˜ëŠ” 브랜치ì´ë©°, -개발/실험ì ë²„ì ¼ì„ í…ŒìŠ¤íŠ¸í•˜ëŠ” ê²ƒì„ ë•ëŠ”ë°ëŠ” 별로 ê´€ì‹¬ì´ ì—†ë‹¤. +개발/실험ì ë²„ì ¼ì„ í…ŒìŠ¤íŠ¸í•˜ëŠ” ê²ƒì„ ë•ê³ ìž í•˜ëŠ” 사용ìžë“¤ê³¼ëŠ” 별로 ê´€ë ¨ì´ ì—†ë‹¤. -ì–´ë–¤ 2.6.x.y 커ë„ë„ ì‚¬ìš©ê°€ëŠ¥í•˜ì§€ 않다면 그때는 가장 ë†’ì€ ìˆ«ìžì˜ 2.6.x +ì–´ë–¤ 2.6.x.y 커ë„ë„ ì‚¬ìš©í• ìˆ˜ 없다면 그때는 가장 ë†’ì€ ìˆ«ìžì˜ 2.6.x 커ë„ì´ í˜„ìž¬ì˜ ì•ˆì • 커ë„ì´ë‹¤. 2.6.x.y는 "stable" 팀<stable@kernel.org>ì— ì˜í•´ 관리ë˜ë©° ê±°ì˜ ë§¤ë²ˆ 격주로 @@ -294,7 +296,7 @@ Andrew Mortonì— ì˜í•´ ë°°í¬ëœ 실험ì ì¸ ì»¤ë„ íŒ¨ì¹˜ë“¤ì´ë‹¤. Andrew는 서브시스템 ì»¤ë„ íŠ¸ë¦¬ì™€ íŒ¨ì¹˜ë“¤ì„ ê°€ì ¸ì™€ì„œ 리눅스 ì»¤ë„ ë©”ì¼ë§ 리스트로 온 ë§Žì€ íŒ¨ì¹˜ë“¤ê³¼ í•œë° ë¬¶ëŠ”ë‹¤. ì´ íŠ¸ë¦¬ëŠ” 새로운 기능들과 íŒ¨ì¹˜ë“¤ì„ ìœ„í•œ 장소를 ì œê³µí•˜ëŠ” ì—í• ì„ í•œë‹¤. í•˜ë‚˜ì˜ íŒ¨ì¹˜ê°€ -mmì— í•œë™ì•ˆ 있으면서 ê·¸ 가치가 -ì¦ëª…ë˜ê²Œ ë˜ë©´ Andrew나 서브시스템 ë©”ì¸íŠ¸ë„ˆëŠ” ê·¸ê²ƒì„ ë©”ì¸ë¼ì¸ì— í¬í•¨ì‹œí‚¤ê¸° +ì¦ëª…ë˜ê²Œ ë˜ë©´ Andrew나 서브시스템 ë©”ì¸í…Œì´ë„ˆëŠ” ê·¸ê²ƒì„ ë©”ì¸ë¼ì¸ì— í¬í•¨ì‹œí‚¤ê¸° 위하여 Linusì—게 보낸다. ì»¤ë„ íŠ¸ë¦¬ì— í¬í•¨í•˜ê³ ì‹¶ì€ ëª¨ë“ ìƒˆë¡œìš´ íŒ¨ì¹˜ë“¤ì€ Linusì—게 보내지기 ì „ì— @@ -327,7 +329,7 @@ Andrew Mortonì— ì˜í•´ ë°°í¬ëœ 실험ì ì¸ ì»¤ë„ íŒ¨ì¹˜ë“¤ì´ë‹¤. Andrew는 - ACPI development tree, Len Brown <len.brown@intel.com > git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git - - Block development tree, Jens Axboe <axboe@suse.de> + - Block development tree, Jens Axboe <jens.axboe@oracle.com> git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git - DRM development tree, Dave Airlie <airlied@linux.ie> @@ -367,8 +369,8 @@ bugzilla.kernel.org는 리눅스 ì»¤ë„ ê°œë°œìžë“¤ì´ 커ë„ì˜ ë²„ê·¸ë¥¼ 추ì kernel bugzilla를 사용하는 ìžì„¸í•œ ë°©ë²•ì€ ë‹¤ìŒì„ 참조하ë¼. http://test.kernel.org/bugzilla/faq.html -ë©”ì¸ ì»¤ë„ ì†ŒìŠ¤ ë””ë ‰í† ë¦¬ì— ìžˆëŠ” REPORTING-BUGS 파ì¼ì€ ì»¤ë„ ë²„ê·¸ì¼ ê²ƒ ê°™ì€ -ê²ƒì„ ë³´ê³ í•˜ëŠ”ëŠ” ë²•ì— ê´€í•œ ì¢‹ì€ í…œí”Œë¦¿ì´ê³ ë¬¸ì œë¥¼ 추ì 하기 위해서 ì»¤ë„ +ë©”ì¸ ì»¤ë„ ì†ŒìŠ¤ ë””ë ‰í† ë¦¬ì— ìžˆëŠ” REPORTING-BUGS 파ì¼ì€ ì»¤ë„ ë²„ê·¸ë¼ê³ ìƒê°ë˜ëŠ” +ê²ƒì„ ë³´ê³ í•˜ëŠ” ë°©ë²•ì— ê´€í•œ ì¢‹ì€ í…œí”Œë¦¿ì´ë©° ë¬¸ì œë¥¼ 추ì 하기 위해서 ì»¤ë„ ê°œë°œìžë“¤ì´ 필요로 하는 ì •ë³´ê°€ 무엇들ì¸ì§€ë¥¼ ìƒì„¸ížˆ ì„¤ëª…í•˜ê³ ìžˆë‹¤. @@ -383,7 +385,7 @@ kernel bugzilla를 사용하는 ìžì„¸í•œ ë°©ë²•ì€ ë‹¤ìŒì„ 참조하ë¼. ì 수를 ì–»ì„ ìˆ˜ 있는 가장 ì¢‹ì€ ë°©ë²•ì¤‘ì˜ í•˜ë‚˜ì´ë‹¤. 왜ëƒí•˜ë©´ ë§Žì€ ì‚¬ëžŒë“¤ì€ ë‹¤ë¥¸ ì‚¬ëžŒë“¤ì˜ ë²„ê·¸ë“¤ì„ ìˆ˜ì •í•˜ê¸° 위하여 ì‹œê°„ì„ ë‚비하지 않기 때문ì´ë‹¤. -ì´ë¯¸ ë³´ê³ ëœ ë²„ê·¸ 리í¬íŠ¸ë“¤ì„ ê°€ì§€ê³ ìž‘ì—…í•˜ê¸° 위해서 http://bugzilla.kernelorg를 +ì´ë¯¸ ë³´ê³ ëœ ë²„ê·¸ 리í¬íŠ¸ë“¤ì„ ê°€ì§€ê³ ìž‘ì—…í•˜ê¸° 위해서 http://bugzilla.kernel.org를 참조하ë¼. ì—¬ëŸ¬ë¶„ì´ ì•žìœ¼ë¡œ ìƒê²¨ë‚ 버그 리í¬íŠ¸ë“¤ì˜ ì¡°ì–¸ìžê°€ ë˜ê¸¸ ì›í•œë‹¤ë©´ bugme-new ë©”ì¼ë§ 리스트나(새로운 버그 리í¬íŠ¸ë“¤ë§Œì´ ì´ê³³ì—ì„œ ë©”ì¼ë¡œ ì „í•´ì§„ë‹¤) bugme-janitor ë©”ì¼ë§ 리스트(bugzillaì— ëª¨ë“ ë³€í™”ë“¤ì´ ì—¬ê¸°ì„œ ë©”ì¼ë¡œ ì „í•´ì§„ë‹¤) @@ -404,8 +406,8 @@ bugme-janitor ë©”ì¼ë§ 리스트(bugzillaì— ëª¨ë“ ë³€í™”ë“¤ì´ ì—¬ê¸°ì„œ ë©”ì 웹ìƒì˜ ë§Žì€ ë‹¤ë¥¸ ê³³ì—ë„ ë©”ì¼ë§ ë¦¬ìŠ¤íŠ¸ì˜ ì•„ì¹´ì´ë¸Œë“¤ì´ 있다. ì´ëŸ¬í•œ ì•„ì¹´ì´ë¸Œë“¤ì„ ì°¾ìœ¼ë ¤ë©´ 검색 ì—”ì§„ì„ ì‚¬ìš©í•˜ë¼. 예를 들어: http://dir.gmane.org/gmane.linux.kernel -ì—¬ëŸ¬ë¶„ì´ ìƒˆë¡œìš´ ë¬¸ì œì— ê´€í•´ ë¦¬ìŠ¤íŠ¸ì— ì˜¬ë¦¬ê¸° ì „ì— ë§í•˜ê³ ì‹¶ì€ ì£¼ì œì— ëŒ€í•œ -ê²ƒì„ ì•„ì¹´ì´ë¸Œì—ì„œ ë¨¼ì € 찾기를 ê°•ë ¥ížˆ 권장한다. ì´ë¯¸ ìƒì„¸í•˜ê²Œ í† ë¡ ëœ ë§Žì€ +ì—¬ëŸ¬ë¶„ì´ ìƒˆë¡œìš´ ë¬¸ì œì— ê´€í•´ ë¦¬ìŠ¤íŠ¸ì— ì˜¬ë¦¬ê¸° ì „ì— ë§í•˜ê³ ì‹¶ì€ ì£¼ì œì— ê´€í•œ +ê²ƒì„ ì•„ì¹´ì´ë¸Œì—ì„œ ë¨¼ì € 찾아보기를 ê°•ë ¥ížˆ 권장한다. ì´ë¯¸ ìƒì„¸í•˜ê²Œ í† ë¡ ëœ ë§Žì€ ê²ƒë“¤ì´ ë©”ì¼ë§ ë¦¬ìŠ¤íŠ¸ì˜ ì•„ì¹´ì´ë¸Œì— 기ë¡ë˜ì–´ 있다. ê°ê°ì˜ ì»¤ë„ ì„œë¸Œì‹œìŠ¤í…œë“¤ì˜ ëŒ€ë¶€ë¶„ì€ ìžì‹ ë“¤ì˜ ê°œë°œì— ê´€í•œ ë…¸ë ¥ë“¤ë¡œ ì´ë£¨ì–´ì§„ @@ -443,7 +445,7 @@ bugme-janitor ë©”ì¼ë§ 리스트(bugzillaì— ëª¨ë“ ë³€í™”ë“¤ì´ ì—¬ê¸°ì„œ ë©”ì ë¬´ì—‡ë³´ë‹¤ë„ ë©”ì¼ë§ ë¦¬ìŠ¤íŠ¸ì˜ ë‹¤ë¥¸ 구ë…ìžë“¤ì—게 ë³´ì—¬ì£¼ë ¤ 한다는 ê²ƒì„ ê¸°ì–µí•˜ë¼. -커뮤니티와 ì¼í•˜ëŠ” 법 +커뮤니티와 í˜‘ë ¥í•˜ëŠ” 법 -------------------- ì»¤ë„ ì»¤ë®¤ë‹ˆí‹°ì˜ ëª©ì ì€ ê°€ëŠ¥í•œí•œ 가장 ì¢‹ì€ ì»¤ë„ì„ ì œê³µí•˜ëŠ” 것ì´ë‹¤. ì—¬ëŸ¬ë¶„ì´ @@ -474,7 +476,7 @@ bugme-janitor ë©”ì¼ë§ 리스트(bugzillaì— ëª¨ë“ ë³€í™”ë“¤ì´ ì—¬ê¸°ì„œ ë©”ì 올바른 ë°©í–¥ì˜ í•´ê²°ì±…ìœ¼ë¡œ ì´ëŒì–´ê°ˆ ì˜ì§€ê°€ 있다면 받아들여질 것ì´ë¼ëŠ” ì ì„ ê¸°ì–µí•˜ë¼. -ì—¬ëŸ¬ë¶„ì˜ ì²« íŒ¨ì¹˜ì— ì—¬ëŸ¬ë¶„ì´ ìˆ˜ì •í•´ì•¼í•˜ëŠ” ì‹ì—¬ê°œ ì •ë„ì˜ íšŒì‹ ì´ ì˜¤ëŠ” +ì—¬ëŸ¬ë¶„ì˜ ì²« íŒ¨ì¹˜ì— ì—¬ëŸ¬ë¶„ì´ ìˆ˜ì •í•´ì•¼í•˜ëŠ” ì‹ì—¬ê°œ ì •ë„ì˜ íšŒì‹ ì´ ì˜¤ëŠ” ê²½ìš°ë„ í”하다. ì´ê²ƒì€ ì—¬ëŸ¬ë¶„ì˜ íŒ¨ì¹˜ê°€ 받아들여지지 ì•Šì„ ê²ƒì´ë¼ëŠ” ê²ƒì„ ì˜ë¯¸í•˜ëŠ” ê²ƒì´ ì•„ë‹ˆê³ ê°œì¸ì 으로 여러분ì—게 ê°ì •ì´ 있어서 그러는 ê²ƒë„ ì•„ë‹ˆë‹¤. 간단히 ì—¬ëŸ¬ë¶„ì˜ íŒ¨ì¹˜ì— ì œê¸°ëœ ë¬¸ì œë“¤ì„ ìˆ˜ì •í•˜ê³ ê·¸ê²ƒì„ ë‹¤ì‹œ @@ -486,12 +488,12 @@ bugme-janitor ë©”ì¼ë§ 리스트(bugzillaì— ëª¨ë“ ë³€í™”ë“¤ì´ ì—¬ê¸°ì„œ ë©”ì ì»¤ë„ ì»¤ë®¤ë‹ˆí‹°ëŠ” 가장 ì „í†µì ì¸ íšŒì‚¬ì˜ ê°œë°œ 환경과는 다르다. ì—¬ê¸°ì— ì—¬ëŸ¬ë¶„ë“¤ì˜ ë¬¸ì œë¥¼ 피하기 위한 목ë¡ì´ 있다. ì—¬ëŸ¬ë¶„ë“¤ì´ ì œì•ˆí•œ ë³€ê²½ë“¤ì— ê´€í•˜ì—¬ ë§í• ë•Œ ì¢‹ì€ ê²ƒë“¤ : - - " ì´ê²ƒì€ 여러 ë¬¸ì œë“¤ì„ í•´ê²¹í•©ë‹ˆë‹¤." + - "ì´ê²ƒì€ 여러 ë¬¸ì œë“¤ì„ í•´ê²¹í•©ë‹ˆë‹¤." - "ì´ê²ƒì€ 2000 ë¼ì¸ì˜ 코드를 ì œê±°í•©ë‹ˆë‹¤." - "ì´ê²ƒì€ ë‚´ê°€ ë§í•˜ë ¤ëŠ” ê²ƒì— ê´€í•´ 설명하는 패치입니다." - "나는 5ê°œì˜ ë‹¤ë¥¸ 아키í…ì³ì—ì„œ ê·¸ê²ƒì„ í…ŒìŠ¤íŠ¸í–ˆìŠ´ìœ¼ë¡œ..." - - "ì—¬ê¸°ì— ì¼ë ¨ì˜ ìž‘ì€ íŒ¨ì¹˜ë“¤ì´ ìžˆìŠµìŒë¡œ..." - - "ì´ê²ƒì€ ì¼ë°˜ì ì¸ ë¨¸ì‹ ì—ì„œ ì„±ëŠ¥ì„ í–¥ìƒì‹œí‚¤ë¯€ë¡œ..." + - "ì—¬ê¸°ì— ì¼ë ¨ì˜ ìž‘ì€ íŒ¨ì¹˜ë“¤ì´ ìžˆìŠ´ìŒë¡œ..." + - "ì´ê²ƒì€ ì¼ë°˜ì ì¸ ë¨¸ì‹ ì—ì„œ ì„±ëŠ¥ì„ í–¥ìƒì‹œí‚´ìœ¼ë¡œ..." ì—¬ëŸ¬ë¶„ë“¤ì´ ë§í• ë•Œ 피해야 í• ì¢‹ì§€ ì•Šì€ ê²ƒë“¤ : - "우리를 ê·¸ê²ƒì„ AIT/ptx/Solarisì—ì„œ ì´ëŸ¬í•œ 방법으로 했다. 그러므로 ê·¸ê²ƒì€ ì¢‹ì€ ê²ƒìž„ì— í‹€ë¦½ì—†ë‹¤..." @@ -500,7 +502,7 @@ bugme-janitor ë©”ì¼ë§ 리스트(bugzillaì— ëª¨ë“ ë³€í™”ë“¤ì´ ì—¬ê¸°ì„œ ë©”ì - "ì´ê²ƒì€ ìš°ë¦¬ì˜ ì—”í„°í”„ë¼ì´ì¦ˆ ìƒí’ˆ ë¼ì¸ì„ 위한 것ì´ë‹¤." - "ì—¬ê¸°ì— ë‚˜ì˜ ìƒê°ì„ ë§í•˜ê³ 있는 1000 페ì´ì§€ 설계 문서가 있다." - "나는 6달ë™ì•ˆ ì´ê²ƒì„ 했으니..." - - "여기세 5000ë¼ì¸ 짜리 패치가 있으니..." + - "ì—¬ê¸°ì— 5000ë¼ì¸ 짜리 패치가 있으니..." - "나는 현재 ë’¤ì£½ë°•ì£½ì¸ ê²ƒì„ ìž¬ìž‘ì„±í–ˆë‹¤. ê·¸ë¦¬ê³ ì—¬ê¸°ì—..." - "나는 마ê°ì‹œí•œì„ ê°€ì§€ê³ ìžˆìœ¼ë¯€ë¡œ ì´ íŒ¨ì¹˜ëŠ” 지금 ì ìš©ë 필요가 있다." @@ -510,13 +512,13 @@ bugme-janitor ë©”ì¼ë§ 리스트(bugzillaì— ëª¨ë“ ë³€í™”ë“¤ì´ ì—¬ê¸°ì„œ ë©”ì 없다는 것ì´ë‹¤. 리눅스 커ë„ì˜ ìž‘ì—… 환경ì—서는 단지 ì´ë©”ì¼ ì£¼ì†Œë§Œ 알수 있기 ë•Œë¬¸ì— ì—¬ì„±ê³¼ 소수 ë¯¼ì¡±ë“¤ë„ ëª¨ë‘ ë°›ì•„ë“¤ì—¬ì§„ë‹¤. êµì œì 으로 ì¼í•˜ê²Œ ë˜ëŠ” ì¸¡ë©´ì€ ì‚¬ëžŒì˜ ì´ë¦„ì— ê·¼ê±°í•˜ì—¬ ì„±ë³„ì„ ì¶”ì¸¡í• ìˆ˜ 없게 -í•˜ê¸°ë•Œë¬¸ì— ì°¨ë³„ì„ ì—†ì• ëŠ” ë° ë„ì›€ì„ ì¤€ë‹¤. Andreaë¼ëŠ” ì´ë¦„ì„ ê°€ì§„ 남ìžì™€ +í•˜ê¸°ë•Œë¬¸ì— ì°¨ë³„ì„ ì—†ì• ëŠ” ë° ë„ì›€ì„ ì¤€ë‹¤. Andreaë¼ëŠ” ì´ë¦„ì„ ê°€ì§„ 남ìžì™€ Patì´ë¼ëŠ” ì´ë¦„ì„ ê°€ì§„ ì—¬ìžê°€ ìžˆì„ ìˆ˜ë„ ìžˆëŠ” 것ì´ë‹¤. 리눅스 커ë„ì—ì„œ 작업하며 ìƒê°ì„ í‘œí˜„í•´ì™”ë˜ ëŒ€ë¶€ë¶„ì˜ ì—¬ì„±ë“¤ì€ ê¸ì •ì ì¸ ê²½í—˜ì„ ê°€ì§€ê³ ìžˆë‹¤. 언어 ìž¥ë²½ì€ ì˜ì–´ì— ìµìˆ™í•˜ì§€ ì•Šì€ ëª‡ëª‡ 사람들ì—게 ë¬¸ì œê°€ ë ìˆ˜ë„ ìžˆë‹¤. - ì–¸ì–´ì˜ í›Œë¥í•œ 구사는 ë©”ì¼ë§ 리스트ì—ì„œ 올바르게 ìžì‹ ì˜ ìƒê°ì„ +ì–¸ì–´ì˜ í›Œë¥í•œ 구사는 ë©”ì¼ë§ 리스트ì—ì„œ 올바르게 ìžì‹ ì˜ ìƒê°ì„ 표현하기 위하여 필요하다. 그래서 ì—¬ëŸ¬ë¶„ì€ ì´ë©”ì¼ì„ 보내기 ì „ì— ì˜ì–´ë¥¼ 올바르게 ì‚¬ìš©í•˜ê³ ìžˆëŠ”ì§€ë¥¼ ì²´í¬í•˜ëŠ” ê²ƒì´ ë°”ëžŒì§í•˜ë‹¤. @@ -524,13 +526,13 @@ Patì´ë¼ëŠ” ì´ë¦„ì„ ê°€ì§„ ì—¬ìžê°€ ìžˆì„ ìˆ˜ë„ ìžˆëŠ” 것ì´ë‹¤. ë¦¬ëˆ…ìŠ ì—¬ëŸ¬ë¶„ì˜ ë³€ê²½ì„ ë‚˜ëˆ„ì–´ë¼ ------------------------ -리눅스 ì»¤ë„ ì»¤ë®¤ë‹ˆí‹°ëŠ” í•œêº¼ë²ˆì— êµ‰ìž¥ížˆ í° ì½”ë“œì˜ ë¬¶ìŒì„ 쉽게 +리눅스 ì»¤ë„ ì»¤ë®¤ë‹ˆí‹°ëŠ” í•œêº¼ë²ˆì— êµ‰ìž¥ížˆ í° ì½”ë“œì˜ ë¬¶ìŒ(chunk)ì„ ì‰½ê²Œ 받아들ì´ì§€ 않는다. ë³€ê²½ì€ ì ì ˆí•˜ê²Œ 소개ë˜ê³ , ê²€í† ë˜ê³ , ê°ê°ì˜ 부분으로 작게 ë‚˜ëˆ„ì–´ì ¸ì•¼ 한다. ì´ê²ƒì€ 회사ì—ì„œ 하는 것과는 ì •í™•ížˆ 반대ë˜ëŠ” 것ì´ë‹¤. ì—¬ëŸ¬ë¶„ë“¤ì˜ ì œì•ˆì€ ê°œë°œ ì´ˆê¸°ì— ì¼ì°ì´ 소개ë˜ì•¼ 한다. 그래서 ì—¬ëŸ¬ë¶„ë“¤ì€ ìžì‹ ì´ í•˜ê³ ìžˆëŠ” ê²ƒì— ê´€í•˜ì—¬ í”¼ë“œë°±ì„ ë°›ì„ ìˆ˜ 있게 ëœë‹¤. 커뮤니티가 ì—¬ëŸ¬ë¶„ë“¤ì´ ì»¤ë®¤ë‹ˆí‹°ì™€ 함께 ì¼í•˜ê³ 있다는 ê²ƒì„ -ëŠë¼ë„ë¡ ë§Œë“¤ê³ ì»¤ë®¤ë‹ˆí‹°ê°€ ì—¬ëŸ¬ë¶„ì˜ ê¸°ëŠ¥ì„ ìœ„í•œ ì“°ë ˆê¸° 장으로서 +ëŠë¼ë„ë¡ ë§Œë“¤ê³ ì»¤ë®¤ë‹ˆí‹°ê°€ ì—¬ëŸ¬ë¶„ì˜ ê¸°ëŠ¥ì„ ìœ„í•œ ì“°ë ˆê¸° ìž¥ìœ¼ë¡œì¨ ì‚¬ìš©ë˜ì§€ ì•Šê³ ìžˆë‹¤ëŠ” ê²ƒì„ ëŠë¼ê²Œ 하ìž. 그러나 ë©”ì¼ë§ ë¦¬ìŠ¤íŠ¸ì— í•œë²ˆì— 50ê°œì˜ ì´ë©”ì¼ì„ 보내지는 ë§ì•„ë¼. ì—¬ëŸ¬ë¶„ë“¤ì˜ ì¼ë ¨ì˜ íŒ¨ì¹˜ë“¤ì€ í•ìƒ ë” ìž‘ì•„ì•¼ 한다. @@ -539,7 +541,7 @@ Patì´ë¼ëŠ” ì´ë¦„ì„ ê°€ì§„ ì—¬ìžê°€ ìžˆì„ ìˆ˜ë„ ìžˆëŠ” 것ì´ë‹¤. ë¦¬ëˆ…ìŠ 1) ìž‘ì€ íŒ¨ì¹˜ë“¤ì€ ì—¬ëŸ¬ë¶„ì˜ íŒ¨ì¹˜ë“¤ì´ ì ìš©ë 수 있는 í™•ë¥ ì„ ë†’ì—¬ì¤€ë‹¤. 왜ëƒí•˜ë©´ 다른 ì‚¬ëžŒë“¤ì€ ì •í™•ì„±ì„ ê²€ì¦í•˜ê¸° 위하여 ë§Žì€ ì‹œê°„ê³¼ ë…¸ë ¥ì„ - 들ì´ê¸°ë¥¼ ì›í•˜ì§€ 않는다. 5ì¤„ì˜ íŒ¨ì¹˜ëŠ” ë©”ì¸íŠ¸ë„ˆê°€ ê±°ì˜ ëª‡ 초간 ížë— + 들ì´ê¸°ë¥¼ ì›í•˜ì§€ 않는다. 5ì¤„ì˜ íŒ¨ì¹˜ëŠ” ë©”ì¸í…Œì´ë„ˆê°€ ê±°ì˜ ëª‡ 초간 ížë— ë³´ë©´ ì ìš©ë 수 있다. 그러나 500 ì¤„ì˜ íŒ¨ì¹˜ëŠ” ì •í™•ì„±ì„ ê²€í† í•˜ê¸° 위하여 ëª‡ì‹œê°„ì´ ê±¸ë¦´ ìˆ˜ë„ ìžˆë‹¤(걸리는 ì‹œê°„ì€ íŒ¨ì¹˜ì˜ í¬ê¸° í˜¹ì€ ë‹¤ë¥¸ ê²ƒì— ë¹„ë¡€í•˜ì—¬ 기하급수ì 으로 늘어난다). @@ -558,18 +560,18 @@ Patì´ë¼ëŠ” ì´ë¦„ì„ ê°€ì§„ ì—¬ìžê°€ ìžˆì„ ìˆ˜ë„ ìžˆëŠ” 것ì´ë‹¤. ë¦¬ëˆ…ìŠ ê°„ê²°í•˜ê³ ê°€ìž¥ ë›°ì–´ë‚œ ë‹µì„ ë³´ê¸¸ ì›í•œë‹¤. 훌ë¥í•œ í•™ìƒì€ ì´ê²ƒì„ ì•Œê³ ë§ˆì§€ë§‰ìœ¼ë¡œ ë‹µì„ ì–»ê¸° ì „ 중간 ê³¼ì •ë“¤ì„ ì œì¶œí•˜ì§„ 않는다. - ì»¤ë„ ê°œë°œë„ ë§ˆì°¬ê°€ì§€ì´ë‹¤. ë©”ì¸íŠ¸ë„ˆë“¤ê³¼ ê²€í† í•˜ëŠ” ì‚¬ëžŒë“¤ì€ ë¬¸ì œë¥¼ + ì»¤ë„ ê°œë°œë„ ë§ˆì°¬ê°€ì§€ì´ë‹¤. ë©”ì¸í…Œì´ë„ˆë“¤ê³¼ ê²€í† í•˜ëŠ” ì‚¬ëžŒë“¤ì€ ë¬¸ì œë¥¼ 풀어나가는 ê³¼ì •ì†ì— 숨겨진 ê³¼ì •ì„ ë³´ê¸¸ ì›í•˜ì§„ 않는다. ê·¸ë“¤ì€ ê°„ê²°í•˜ê³ ë©‹ì§„ ë‹µì„ ë³´ê¸¸ ì›í•œë‹¤." -커뮤니티와 함께 ì¼í•˜ë©° ë›°ì–´ë‚œ ë‹µì„ ì°¾ê³ ì—¬ëŸ¬ë¶„ë“¤ì˜ ì™„ì„±ë˜ì§€ ì•Šì€ ì¼ë“¤ -사ì´ì— ê· í˜•ì„ ìœ ì§€í•´ì•¼ 하는 ì–´ë ¤ì›€ì´ ìžˆì„ ìˆ˜ 있다. 그러므로 í”„ë¡œì„¸ìŠ¤ì˜ -ì´ˆë°˜ì— ì—¬ëŸ¬ë¶„ì˜ ì¼ì„ í–¥ìƒì‹œí‚¤ê¸°ìœ„í•œ í”¼ë“œë°±ì„ ì–»ëŠ” 것 ë¿ë§Œ ì•„ë‹ˆë¼ +커뮤니티와 í˜‘ë ¥í•˜ë©° ë›°ì–´ë‚œ ë‹µì„ ì°¾ëŠ” 것과 ì—¬ëŸ¬ë¶„ë“¤ì˜ ë마치지 못한 작업들 +사ì´ì— ê· í˜•ì„ ìœ ì§€í•´ì•¼ 하는 ê²ƒì€ ì–´ë ¤ìš¸ì§€ë„ ëª¨ë¥¸ë‹¤. 그러므로 í”„ë¡œì„¸ìŠ¤ì˜ +ì´ˆë°˜ì— ì—¬ëŸ¬ë¶„ì˜ ìž‘ì—…ì„ í–¥ìƒì‹œí‚¤ê¸°ìœ„í•œ í”¼ë“œë°±ì„ ì–»ëŠ” 것 ë¿ë§Œ ì•„ë‹ˆë¼ ì—¬ëŸ¬ë¶„ë“¤ì˜ ë³€ê²½ë“¤ì„ ìž‘ì€ ë¬¶ìŒìœ¼ë¡œ ìœ ì§€í•´ì„œ 심지어는 ì—¬ëŸ¬ë¶„ì˜ ìž‘ì—…ì˜ -ëª¨ë“ ë¶€ë¶„ì´ ì§€ê¸ˆì€ í¬í•¨ë 준비가 ë˜ì–´ìžˆì§€ 않지만 ìž‘ì€ ë¶€ë¶„ì€ ì´ë¯¸ +ëª¨ë“ ë¶€ë¶„ì´ ì§€ê¸ˆì€ í¬í•¨ë 준비가 ë˜ì–´ìžˆì§€ 않지만 ìž‘ì€ ë¶€ë¶„ì€ ë²Œì¨ ë°›ì•„ë“¤ì—¬ì§ˆ 수 있ë„ë¡ ìœ ì§€í•˜ëŠ” ê²ƒì´ ë°”ëžŒì§í•˜ë‹¤. -ë˜í•œ 완성ë˜ì§€ ì•Šì•˜ê³ "ë‚˜ì¤‘ì— ìˆ˜ì •ë 것ì´ë‹¤." 와 ê°™ì€ ê²ƒë“¤ì€ í¬í•¨í•˜ëŠ” +ë˜í•œ 완성ë˜ì§€ ì•Šì•˜ê³ "ë‚˜ì¤‘ì— ìˆ˜ì •ë 것ì´ë‹¤." 와 ê°™ì€ ê²ƒë“¤ì„ í¬í•¨í•˜ëŠ” íŒ¨ì¹˜ë“¤ì€ ë°›ì•„ë“¤ì—¬ì§€ì§€ ì•Šì„ ê²ƒì´ë¼ëŠ” ì ì„ ìœ ë…하ë¼. ë³€ê²½ì„ ì •ë‹¹í™”í•´ë¼ @@ -577,7 +579,7 @@ Patì´ë¼ëŠ” ì´ë¦„ì„ ê°€ì§„ ì—¬ìžê°€ ìžˆì„ ìˆ˜ë„ ìžˆëŠ” 것ì´ë‹¤. ë¦¬ëˆ…ìŠ ì—¬ëŸ¬ë¶„ë“¤ì˜ ë‚˜ëˆ„ì–´ì§„ íŒ¨ì¹˜ë“¤ì„ ë¦¬ëˆ…ìŠ¤ 커뮤니티가 왜 ë°˜ì˜í•´ì•¼ 하는지를 ì•Œë„ë¡ í•˜ëŠ” ê²ƒì€ ë§¤ìš° 중요하다. 새로운 ê¸°ëŠ¥ë“¤ì´ í•„ìš”í•˜ê³ ìœ ìš©í•˜ë‹¤ëŠ” -ê²ƒì€ ë°˜ë“œì‹œ ê·¸ì— ë§žëŠ” ì´ìœ ê°€ 있어야 한다. +ê²ƒì€ ë°˜ë“œì‹œ ê·¸ì— í•©ë‹¹í•œ ì´ìœ ê°€ 있어야 한다. ë³€ê²½ì„ ë¬¸ì„œí™”í•´ë¼ @@ -588,7 +590,7 @@ Patì´ë¼ëŠ” ì´ë¦„ì„ ê°€ì§„ ì—¬ìžê°€ ìžˆì„ ìˆ˜ë„ ìžˆëŠ” 것ì´ë‹¤. ë¦¬ëˆ…ìŠ ê²ƒì´ë‹¤. ê·¸ë¦¬ê³ í•ìƒ ê·¸ ë‚´ìš©ì„ ë³´ê¸¸ ì›í•˜ëŠ” ëª¨ë“ ì‚¬ëžŒë“¤ì„ ìœ„í•´ ë³´ì¡´ë 것ì´ë‹¤. 패치는 완벽하게 다ìŒê³¼ ê°™ì€ ë‚´ìš©ë“¤ì„ í¬í•¨í•˜ì—¬ 설명해야 한다. - ë³€ê²½ì´ ì™œ 필요한지 - - íŒ¨ì¹˜ì— ê´€í•œ ì „ì²´ 설계 어프로치 + - íŒ¨ì¹˜ì— ê´€í•œ ì „ì²´ 설계 ì ‘ê·¼(approach) - 구현 ìƒì„¸ë“¤ - 테스트 결과들 @@ -600,7 +602,7 @@ Patì´ë¼ëŠ” ì´ë¦„ì„ ê°€ì§„ ì—¬ìžê°€ ìžˆì„ ìˆ˜ë„ ìžˆëŠ” 것ì´ë‹¤. ë¦¬ëˆ…ìŠ ì´ ëª¨ë“ ê²ƒì„ í•˜ëŠ” ê²ƒì€ ë§¤ìš° ì–´ë ¤ìš´ ì¼ì´ë‹¤. 완벽히 소화하는 ë°ëŠ” ì ì–´ë„ ëª‡ë…„ì´ -걸릴 ìˆ˜ë„ ìžˆë‹¤. ë§Žì€ ì¸ë‚´ì™€ ê²°ì˜ê°€ 필요한 계ì†ë˜ëŠ” ê°œì„ ì˜ ê³¼ì •ì´ë‹¤. 그러나 +걸릴 ìˆ˜ë„ ìžˆë‹¤. ë§Žì€ ì¸ë‚´ì™€ ê²°ì‹¬ì´ í•„ìš”í•œ 계ì†ë˜ëŠ” ê°œì„ ì˜ ê³¼ì •ì´ë‹¤. 그러나 가능한한 í¬ê¸°í•˜ì§€ ë§ë¼. ë§Žì€ ì‚¬ëžŒë“¤ì€ ì´ì „부터 í•´ì™”ë˜ ê²ƒì´ê³ ê·¸ ì‚¬ëžŒë“¤ë„ ì •í™•í•˜ê²Œ ì—¬ëŸ¬ë¶„ë“¤ì´ ì§€ê¸ˆ ì„œ 있는 ê·¸ 곳부터 시작했었다. @@ -620,4 +622,4 @@ David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepardì—ê²Œë„ ê°ì‚ -ë©”ì¸íŠ¸ë„ˆ: Greg Kroah-Hartman <greg@kroah.com> +ë©”ì¸í…Œì´ë„ˆ: Greg Kroah-Hartman <greg@kroah.com> diff --git a/Documentation/ko_KR/stable_api_nonsense.txt b/Documentation/ko_KR/stable_api_nonsense.txt new file mode 100644 index 00000000000..8f2b0e1d98c --- /dev/null +++ b/Documentation/ko_KR/stable_api_nonsense.txt @@ -0,0 +1,195 @@ +NOTE: +This is a version of Documentation/stable_api_nonsense.txt translated +into korean +This document is maintained by barrios <minchan.kim@gmail.com> +If you find any difference between this document and the original file or +a problem with the translation, please contact the maintainer of this file. + +Please also note that the purpose of this file is to be easier to +read for non English (read: korean) speakers and is not intended as +a fork. So if you have any comments or updates for this file please +try to update the original English file first. + +================================== +ì´ ë¬¸ì„œëŠ” +Documentation/stable_api_nonsense.txt +ì˜ í•œê¸€ 번ì—입니다. + +ì—ìžï¼š 김민찬 <minchan.kim@gmail.com> +ê°ìˆ˜ï¼š ì´ì œì´ë¯¸ <jamee.lee@samsung.com> +================================== + +리눅스 ì»¤ë„ ë“œë¼ì´ë²„ ì¸í„°íŽ˜ì´ìŠ¤ +(ì—¬ëŸ¬ë¶„ë“¤ì˜ ëª¨ë“ ì§ˆë¬¸ì— ëŒ€í•œ 답 ê·¸ë¦¬ê³ ë‹¤ë¥¸ 몇가지) + +Greg Kroah-Hartman <greg@kroah.com> + +ì´ ë¬¸ì„œëŠ” 리눅스가 왜 ë°”ì´ë„ˆë¦¬ ì»¤ë„ ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ 갖지 않는지, 왜 변하지 +않는(stable) ì»¤ë„ ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ 갖지 않는지를 설명하기 위해 쓰여졌다. +ì´ ë¬¸ì„œëŠ” 커ë„ê³¼ ìœ ì €ê³µê°„ 사ì´ì˜ ì¸í„°íŽ˜ì´ìŠ¤ê°€ ì•„ë‹ˆë¼ ì»¤ë„ ë‚´ë¶€ì˜ +ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì„ ì„¤ëª…í•˜ê³ ìžˆë‹¤ëŠ” ê²ƒì„ ìœ ë…하ë¼. 커ë„ê³¼ ìœ ì €ê³µê°„ 사ì´ì˜ +ì¸í„°íŽ˜ì´ìŠ¤ëŠ” ì‘ìš©í”„ë¡œê·¸ëž¨ì´ ì‚¬ìš©í•˜ëŠ” syscall ì¸í„°íŽ˜ì´ìŠ¤ì´ë‹¤. ê·¸ ì¸í„°íŽ˜ì´ìŠ¤ëŠ” +오랫ë™ì•ˆ ê±°ì˜ ë³€í•˜ì§€ ì•Šì•˜ê³ ì•žìœ¼ë¡œë„ ë³€í•˜ì§€ ì•Šì„ ê²ƒì´ë‹¤. 나는 pre 0.9ì—ì„œ +만들어졌지만 ìµœì‹ ì˜ 2.6 ì»¤ë„ ë°°í¬ì—ì„œë„ ìž˜ ë™ìž‘하는 í”„ë¡œê·¸ëž¨ì„ ê°€ì§€ê³ +있다. ì´ ì¸í„°íŽ˜ì´ìŠ¤ëŠ” 사용ìžì™€ ì‘용프로그램 개발ìžë“¤ì´ 변하지 ì•Šì„ ê²ƒì´ë¼ê³ +여길수 있는 것ì´ë‹¤. + + +ì´ˆë¡ +---- +ì—¬ëŸ¬ë¶„ì€ ë³€í•˜ì§€ 않는 ì»¤ë„ ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ ì›í•œë‹¤ê³ ìƒê°í•˜ì§€ë§Œ ì‹¤ì œë¡œëŠ” +ê·¸ë ‡ì§€ 않으며 심지어는 ê·¸ê²ƒì„ ì•Œì•„ì±„ì§€ 못한다. ì—¬ëŸ¬ë¶„ì´ ì›í•˜ëŠ” ê²ƒì€ +ì•ˆì •ë˜ê²Œ 실행ë˜ëŠ” ë“œë¼ì´ë²„ì´ë©° ë“œë¼ì´ë²„ê°€ ë©”ì¸ ì»¤ë„ íŠ¸ë¦¬ì— ìžˆì„ ë•Œ +그런 ì•ˆì •ì ì¸ ë“œë¼ì´ë²„를 ì–»ì„ ìˆ˜ 있게 ëœë‹¤. ë˜í•œ ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„ê°€ +ë©”ì¸ ì»¤ë„ íŠ¸ë¦¬ì— ìžˆë‹¤ë©´ 다른 ë§Žì€ ì¢‹ì€ ì´ì ë“¤ì„ ì–»ê²Œ ëœë‹¤. 그러한 ê²ƒë“¤ì´ +리눅스를 ê°•ê±´í•˜ê³ , ì•ˆì •ì ì´ë©°, 성숙한 ìš´ì˜ì²´ì œë¡œ 만들어 놓ìŒìœ¼ë¡œì¨ +여러분들로 하여금 바로 리눅스를 사용하게 만드는 ì´ìœ ì´ë‹¤. + + +소개 +---- + +ì»¤ë„ ë‚´ë¶€ì˜ ì¸í„°íŽ˜ì´ìŠ¤ê°€ 바뀌는 ê²ƒì„ ê±±ì •í•˜ë©° ì»¤ë„ ë“œë¼ì´ë²„를 ìž‘ì„±í•˜ê³ +싶어하는 ì‚¬ëžŒì€ ì •ë§ ì´ìƒí•œ 사람ì´ë‹¤. 세ìƒì˜ ëŒ€ë‹¤ìˆ˜ì˜ ì‚¬ëžŒë“¤ì€ ì´ ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ +ë³´ì§€ëª»í• ê²ƒì´ë©° ì „í˜€ ê±±ì •í•˜ì§€ë„ ì•ŠëŠ”ë‹¤. + +ë¨¼ì €, 나는 closed 소스, hidden 소스, binary blobs, 소스 wrappers, ë˜ëŠ” GPLë¡œ +ë°°í¬ë˜ì—ˆì§€ë§Œ 소스 코드를 ê°–ê³ ìžˆì§€ ì•Šì€ ì»¤ë„ ë“œë¼ì´ë²„ë“¤ì„ ì„¤ëª…í•˜ëŠ” ì–´ë–¤ 다른 +ìš©ì–´ë“¤ì— ê´€í•œ ì–´ë–¤ 법ì ì¸ ë¬¸ì œì— ê´€í•´ì„œëŠ” 언급하지 ì•Šì„ ê²ƒì´ë‹¤. ì–´ë–¤ 법ì ì¸ +ì§ˆë¬¸ë“¤ì„ ê°€ì§€ê³ ìžˆë‹¤ë©´ 변호사와 ì—°ë½í•˜ë¼. 나는 프로그래머ì´ë¯€ë¡œ 여기서 ê¸°ìˆ ì ì¸ +ë¬¸ì œë“¤ë§Œì„ ì„¤ëª…í•˜ë ¤ê³ í•œë‹¤. (법ì ì¸ ë¬¸ì œë¥¼ 경시하는 ê²ƒì€ ì•„ë‹ˆë‹¤. 그런 ë¬¸ì œë“¤ì€ +엄연히 í˜„ì‹¤ì— ìžˆê³ ì—¬ëŸ¬ë¶„ë“¤ì€ í•ìƒ ê·¸ ë¬¸ì œë“¤ì„ ì¸ì‹í•˜ê³ ìžˆì„ í•„ìš”ëŠ” 있다.) + +ìž, ë‘ê°€ì§€ì˜ ì£¼ìš” ì£¼ì œê°€ 있다. ë°”ì´ë„ˆë¦¬ ì»¤ë„ ì¸í„°íŽ˜ì´ìŠ¤ë“¤ê³¼ 변하지 않는 +ì»¤ë„ ì†ŒìŠ¤ ì¸í„°íŽ˜ì´ë“¤. ê·¸ê²ƒë“¤ì€ ì„œë¡œ ì˜ì¡´ì„±ì„ ê°€ì§€ê³ ìžˆì§€ë§Œ ë°”ì´ë„ˆë¦¬ +ë¬¸ì œë¥¼ ë¨¼ì € í’€ê³ ë„˜ì–´ê°ˆ 것ì´ë‹¤. + + + +ë°”ì´ë„ˆë¦¬ ì»¤ë„ ì¸í„°íŽ˜ì´ìŠ¤ +------------------------ +우리가 변하지 않는 ì»¤ë„ ì†ŒìŠ¤ ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ ê°€ì§€ê³ ìžˆë‹¤ê³ ê°€ì •í•˜ìž. 그러면 +ë°”ì´ë„ˆë¦¬ ì¸í„°íŽ˜ì´ìŠ¤ ë˜í•œ ìžì—°ì 으로 변하지 ì•Šì„까? í‹€ë ¸ë‹¤. 리눅스 커ë„ì— +관한 ë‹¤ìŒ ì‚¬ì‹¤ë“¤ì„ ìƒê°í•´ë³´ë¼. + - ì—¬ëŸ¬ë¶„ë“¤ì´ ì‚¬ìš©í•˜ëŠ” C 컴파ì¼ëŸ¬ì˜ ë²„ì ¼ì— ë”°ë¼ ë‹¤ë¥¸ ì»¤ë„ ìžë£Œ êµ¬ì¡°ë“¤ì€ + 다른 alignmnetë“¤ì„ ê°–ê²Œ ë 것ì´ê³ 다른 방법으로(í•¨ìˆ˜ë“¤ì„ inline으로 + í–ˆëŠëƒ, 아니ëƒ) 다른 í•¨ìˆ˜ë“¤ì„ í¬í•¨í•˜ëŠ” ê²ƒë„ ê°€ëŠ¥í•œë‹¤. 중요한 ê²ƒì€ + 개별ì ì¸ í•¨ìˆ˜ êµ¬ì„±ì´ ì•„ë‹ˆë¼ ìžë£Œ 구조 íŒ¨ë”©ì´ ë‹¬ë¼ì§„다는 ì ì´ë‹¤. + - ì—¬ëŸ¬ë¶„ì´ ì„ íƒí•œ ì»¤ë„ ë¹Œë“œ ì˜µì…˜ì— ë”°ë¼ì„œ 커ë„ì€ ë‹¤ì–‘í•œ ê²ƒë“¤ì„ ê°€ì •í• + 수 있다. + - 다른 êµ¬ì¡°ì²´ë“¤ì€ ë‹¤ë¥¸ í•„ë“œë“¤ì„ í¬í•¨í• 수 있다. + - 몇몇 í•¨ìˆ˜ë“¤ì€ ì „í˜€ 구현ë˜ì§€ ì•Šì„ ìˆ˜ë„ ìžˆë‹¤(즉, 몇몇 lockë“¤ì€ + non-SMP 빌드ì—서는 사ë¼ì ¸ ë²„ë¦´ìˆ˜ë„ ìžˆë‹¤). + - 커ë„ë‚´ì— ë©”ëª¨ë¦¬ëŠ” build optoinë“¤ì— ë”°ë¼ ë‹¤ë¥¸ 방법으로 alignë 수 + 있다. + - 리눅스는 ë§Žì€ ë‹¤ì–‘í•œ 프로세서 아키í…ì³ì—ì„œ 실행ëœë‹¤. í•œ 아키í…ì³ì˜ + ë°”ì´ë„ˆë¦¬ ë“œë¼ì´ë²„를 다른 아키í…ì³ì—ì„œ ì •ìƒì 으로 실행시킬 ë°©ë²•ì€ + 없다. + +커ë„ì„ ë¹Œë“œí–ˆë˜ C 컴파ì¼ëŸ¬ì™€ ì •í™•í•˜ê²Œ ê°™ì€ ê²ƒì„ ì‚¬ìš©í•˜ê³ ì •í™•í•˜ê²Œ ê°™ì€ +ì»¤ë„ êµ¬ì„±(configuration)ì„ ì‚¬ìš©í•˜ì—¬ ì—¬ëŸ¬ë¶„ë“¤ì˜ ëª¨ë“ˆì„ ë¹Œë“œí•˜ë©´ 간단히 +ë§Žì€ ë¬¸ì œë“¤ì„ í•´ê²°í• ìˆ˜ 있다. ì´ë ‡ê²Œ 하는 ê²ƒì€ ì—¬ëŸ¬ë¶„ë“¤ì´ í•˜ë‚˜ì˜ ë¦¬ëˆ…ìŠ¤ +ë°°í¬íŒì˜ í•˜ë‚˜ì˜ ë°°í¬ ë²„ì ¼ì„ ìœ„í•œ ëª¨ë“ˆë§Œì„ ì œê³µí•œë‹¤ë©´ ë³„ì¼ ì•„ë‹ ê²ƒì´ë‹¤. +그러나 ê°ê¸° 다른 리눅스 ë°°í¬íŒë§ˆë‹¤ 한번씩 빌드하는 수를 ê° ë¦¬ëˆ…ìŠ¤ ë°°í¬íŒë§ˆë‹¤ +ì œê³µí•˜ëŠ” 다른 ë¦´ë¦¬ì¦ˆì˜ ìˆ˜ì™€ 곱하게 ë˜ë©´ ì´ë²ˆì—는 ê° ë¦´ë¦¬ì¦ˆë“¤ì˜ ë‹¤ë¥¸ 빌드 +ì˜µì…˜ì˜ ì•…ëª½ê³¼ 마주하게 것ì´ë‹¤. ë˜í•œ ê° ë¦¬ëˆ…ìŠ¤ ë°°í¬íŒë“¤ì€ 다른 하드웨어 +종류ì—(다른 프로세서 타입과 다른 옵션들) ë§žì¶°ì ¸ 있는 ë§Žì€ ë‹¤ë¥¸ 커ë„ë“¤ì„ +ë°°í¬í•œë‹¤. 그러므로 í•œë²ˆì˜ ë°°í¬ì—서조차 ì—¬ëŸ¬ë¶„ë“¤ì˜ ëª¨ë“ˆì€ ì—¬ëŸ¬ ë²„ì ¼ì„ +만들 필요가 있다. + +나를 믿어ë¼. ì—¬ëŸ¬ë¶„ë“¤ì€ ì´ëŸ¬í•œ ì¢…ë¥˜ì˜ ë°°í¬ë¥¼ 지ì›í•˜ë ¤ê³ ì‹œë„한다면 ì‹œê°„ì´ +지나면 ë¯¸ì¹ ì§€ê²½ì´ ë 것ì´ë‹¤. ë‚œ ì´ëŸ¬í•œ ê²ƒì„ ì˜¤ëž˜ì „ì— ì•„ì£¼ ì–´ë µê²Œ ë°°ì› ë‹¤... + + + +변하지않는 ì»¤ë„ ì†ŒìŠ¤ ì¸í„°íŽ˜ì´ìŠ¤ë“¤ +--------------------------------- + +리눅스 ì»¤ë„ ë“œë¼ì´ë²„를 계ì†í•´ì„œ ë©”ì¸ ì»¤ë„ íŠ¸ë¦¬ì— ë°˜ì˜í•˜ì§€ ì•Šê³ +ìœ ì§€ë³´ìˆ˜í•˜ë ¤ê³ í•˜ëŠ” 사름들과 ì´ ë¬¸ì œë¥¼ ë…¼ì˜í•˜ê²Œ ë˜ë©´ 훨씬 ë” +"ë…¼ëž€ì˜ ì—¬ì§€ê°€ 많ì€" ì£¼ì œê°€ ë 것ì´ë‹¤. + +리눅스 ì»¤ë„ ê°œë°œì€ ëŠìž„ì—†ì´ ë¹ ë¥¸ ì†ë„ë¡œ ì´ë£¨ì–´ì§€ê³ 있으며 ê²°ì½” +ëŠìŠ¨í•´ì§„ ì ì´ ì—†ë‹¤. ì»¤ë„ ê°œë°œìžë“¤ì´ 현재 ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì—ì„œ 버그를 +발견하거나 무엇ì¸ê°€ í• ìˆ˜ 있는 ë” ì¢‹ì€ ë°©ë²•ì„ ì°¾ê²Œ ë˜ì—ˆë‹¤ê³ 하ìž. +ê·¸ë“¤ì´ ë°œê²¬í•œ ê²ƒì„ ì‹¤í–‰í•œë‹¤ë©´ ì•„ë§ˆë„ ë” ìž˜ ë™ìž‘하ë„ë¡ í˜„ìž¬ ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì„ +ìˆ˜ì •í•˜ê²Œ ë 것ì´ë‹¤. ê·¸ë“¤ì´ ê·¸ëŸ° ì¼ì„ 하게ë˜ë©´ 함수 ì´ë¦„ë“¤ì€ ë³€í•˜ê²Œ ë˜ê³ , +êµ¬ì¡°ì²´ë“¤ì€ ëŠ˜ì–´ë‚˜ê±°ë‚˜ 줄어들게 ë˜ê³ , 함수 파ë¼ë¯¸í„°ë“¤ì€ 재작업ë 것ì´ë‹¤. +ì´ëŸ¬í•œ ì¼ì´ ë°œìƒë˜ë©´ ì»¤ë„ ë‚´ì— ì´ ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ ì‚¬ìš©í–ˆë˜ ì¸ìŠ¤í„´ìŠ¤ë“¤ì´ ë™ì‹œì— +ìˆ˜ì •ë 것ì´ë©° ì´ëŸ¬í•œ ê³¼ì •ì€ ëª¨ë“ ê²ƒì´ ê³„ì†í•´ì„œ 올바르게 ë™ìž‘í• ê²ƒì´ë¼ëŠ” +ê²ƒì„ ë³´ìž¥í•œë‹¤. + +ì´ëŸ¬í•œ ê²ƒì˜ í•œ 예로ì¨, ì»¤ë„ ë‚´ë¶€ì˜ USB ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì€ ì´ ì„œë¸Œì‹œìŠ¤í…œì´ +ìƒê¸´ ì´í›„ë¡œ ì ì–´ë„ 3ë²ˆì˜ ë‹¤ë¥¸ ìž¬ìž‘ì—…ì„ ê²ªì—ˆë‹¤. ì´ ìž¬ìž‘ì—…ë“¤ì€ ë§Žì€ ë‹¤ë¥¸ +ë¬¸ì œë“¤ì„ í’€ì—ˆë‹¤. + - ë°ì´í„° ìŠ¤íŠ¸ë¦¼ë“¤ì˜ ë™ê¸°ì ì¸ ëª¨ë¸ì—ì„œ 비ë™ê¸°ì ì¸ ëª¨ë¸ë¡œì˜ 변화. ì´ê²ƒì€ + ë§Žì€ ë“œë¼ì´ë²„ë“¤ì˜ ë³µìž¡ì„±ì„ ì¤„ì´ê³ ì²˜ë¦¬ëŸ‰ì„ í–¥ìƒì‹œì¼œ 현재는 ê±°ì˜ ëª¨ë“ + USB ìž¥ì¹˜ë“¤ì˜ ê±°ì˜ ìµœëŒ€ ì†ë„ë¡œ 실행ë˜ê³ 있다. + - USB ë“œë¼ì´ë²„ê°€ USB 코어로부터 ë°ì´í„° íŒ¨í‚·ë“¤ì„ í• ë‹¹ë°›ë¡œë¡ í•œ 변경으로 + ì¸í•´ì„œ ì§€ê¸ˆì˜ ëª¨ë“ ë“œë¼ì´ë²„ë“¤ì€ ë§Žì€ ë¬¸ì„œí™”ëœ ë°ë“œë½ì„ ìˆ˜ì •í•˜ê¸° 위하여 + USB 코어ì—게 ë” ë§Žì€ ì •ë³´ë¥¼ ì œê³µí•´ì•¼ë§Œ 한다. + +ì´ê²ƒì€ 오랫ë™ì•ˆ ìžì‹ ì˜ ì˜¤ëž˜ëœ USB ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì„ ìœ ì§€í•´ì•¼ 하는 closed ìš´ì˜ì²´ì œë“¤ê³¼ëŠ” +ì™„ì „ížˆ 반대ë˜ëŠ” 것ì´ë‹¤. closedëœ ìš´ì˜ì²´ì œë“¤ì€ 새로운 개발ìžë“¤ì—게 우연히 ë‚¡ì€ +ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ 사용하게 í• ê¸°íšŒë¥¼ 주게ë˜ë©°, ì ì ˆí•˜ì§€ 못한 방법으로 처리하게 ë˜ì–´ +ìš´ì˜ì²´ì œì˜ ì•ˆì •ì„±ì„ í•´ì¹˜ëŠ” ë¬¸ì œë¥¼ 야기하게 ëœë‹¤. + +ì´ ë‘ê°€ì§€ì˜ ì˜ˆë“¤ 모ë‘, ëª¨ë“ ê°œë°œìžë“¤ì€ ê¼ ì´ë£¨ì–´ì ¸ì•¼ 하는 중요한 변화들ì´ë¼ê³ +ë™ì˜ë¥¼ í•˜ì˜€ê³ ë¹„êµì ì ì€ ê³ í†µìœ¼ë¡œ 변경ë˜ì–´ì¡Œë‹¤. 리눅스가 변하지 않는 소스 +ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ ê³ ì§‘í•œë‹¤ë©´, 새로운 ì¸í„°íŽ˜ì´ìŠ¤ê°€ 만들어지게 ë˜ë©° 반면 ê¸°ì¡´ì˜ ì˜¤ëž˜ëœ +것들, ê·¸ë¦¬ê³ ê¹¨ì§„ ê²ƒë“¤ì€ ê³„ì†í•´ì„œ ìœ ì§€ë˜ì–´ì•¼ 하며 ì´ëŸ¬í•œ ì¼ë“¤ì€ USB 개발ìžë“¤ì—게 +ë˜ ë‹¤ë¥¸ ì¼ê±°ë¦¬ë¥¼ 주게 ëœë‹¤. ëª¨ë“ ë¦¬ëˆ…ìŠ¤ USB 개발ìžë“¤ì—게 ìžì‹ ì˜ ê·¸ë“¤ì˜ ì—…ë¬´ë¥¼ +마친 후 ì‹œê°„ì„ íˆ¬ìží•˜ì—¬ 아무 ë“ë„ ì—†ëŠ” 무료 봉사를 해달ë¼ê³ 하는 ê²ƒì€ ê°€ëŠ¥ì„±ì´ +í¬ë°•í•œ ì¼ì´ë‹¤. + +보안 ë¬¸ì œ ì—ì‹œ 리눅스ì—게는 매우 중요하다. 보안 ë¬¸ì œê°€ 발견ë˜ë©´ ê·¸ê²ƒì€ +매우 ì§§ì€ ì‹œê°„ ì•ˆì— ìˆ˜ì •ëœë‹¤. 보안 ë¬¸ì œëŠ” ê·¸ ë¬¸ì œë¥¼ 해결하기 위하여 +여러번 내부 ì»¤ë„ ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì„ 재작업하게 만들었다. ì´ëŸ¬í•œ ë¬¸ì œê°€ +ë°œìƒí•˜ì˜€ì„ ë•Œ ê·¸ ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì„ 사용하는 ëª¨ë“ ë“œë¼ì´ë²„ë“¤ë„ ë™ì‹œì— +ìˆ˜ì •ë˜ì–´ 보안 ë¬¸ì œê°€ 앞으로 갑작스럽게 ìƒê¸°ì§€ëŠ” ì•Šì„ ê²ƒì´ë¼ëŠ” ê²ƒì„ +보장한다. 내부 ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì˜ ë³€ê²½ì´ í—ˆë½ë˜ì§€ 않으면 ì´ëŸ¬í•œ ì¢…ë¥˜ì˜ ë³´ì•ˆ +ë¬¸ì œë¥¼ ìˆ˜ì •í•˜ê³ ê·¸ê²ƒì´ ë‹¤ì‹œ ë°œìƒí•˜ì§€ ì•Šì„ ê²ƒì´ë¼ê³ 보장하는 ê²ƒì€ ê°€ëŠ¥í•˜ì§€ +ì•Šì„ ê²ƒì´ë‹¤. + +ì»¤ë„ ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì€ 계ì†í•´ì„œ ì •ë¦¬ë˜ê³ 있다. 현재 ì¸í„°íŽ˜ì´ìŠ¤ë¥¼ 사용하는 +ì‚¬ëžŒì´ í•œëª…ë„ ì—†ë‹¤ë©´ ê·¸ê²ƒì€ ì‚ì œëœë‹¤. ì´ê²ƒì€ 커ë„ì´ ê°€ëŠ¥í•œí•œ 가장 작게 +ìœ ì§€ë˜ë©° 존재하는 ëª¨ë“ ê°€ëŠ¥ì„±ì´ ìžˆëŠ” ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì´ 테스트ëœë‹¤ëŠ” ê²ƒì„ +보장한다(사용ë˜ì§€ 않는 ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì€ ìœ íš¨ì„± ê²€ì¦ì„ 하기가 ê±°ì˜ ë¶ˆê°€ëŠ¥í•˜ë‹¤). + + +ë¬´ì—‡ì„ í•´ì•¼ 하나 +--------------- +ìž, ì—¬ëŸ¬ë¶„ì´ ë©”ì¸ ì»¤ë„ íŠ¸ë¦¬ì— ìžˆì§€ ì•Šì€ ë¦¬ëˆ…ìŠ¤ ì»¤ë„ ë“œë¼ì´ë²„를 ê°€ì§€ê³ +있다면 ì—¬ëŸ¬ë¶„ì€ ì¦‰, 개발ìžëŠ” ë¬´ì—‡ì„ í•´ì•¼ 하나? ëª¨ë“ ë°°í¬íŒë§ˆë‹¤ 다른 +ì»¤ë„ ë²„ì ¼ì„ ìœ„í•œ ë°”ì´ë„ˆë¦¬ ë“œë¼ì´ë²„를 ë°°í¬í•˜ëŠ” ê²ƒì€ ì•…ëª½ì´ë©° 계ì†í•´ì„œ +ë³€í•˜ê³ ìžˆëŠ” ì»¤ë„ ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì˜ 맞처 ìœ ì§€ë³´ìˆ˜í•˜ë ¤ê³ ì‹œë„하는 ê²ƒì€ íž˜ë“ +ì¼ì´ë‹¤. + +간단하다. ì—¬ëŸ¬ë¶„ì˜ ì»¤ë„ ë“œë¼ì´ë²„를 ë©”ì¸ ì»¤ë„ íŠ¸ë¦¬ì— ë°˜ì˜í•˜ë¼(우리는 여기서 +GPLì„ ë”°ë¥´ëŠ” ë°°í¬ ë“œë¼ì´ë²„ì— ê´€í•´ ì–˜ê¸°í•˜ê³ ìžˆë‹¤ëŠ” ê²ƒì„ ìƒê¸°í•˜ë¼. ì—¬ëŸ¬ë¶„ì˜ +코드가 ì´ëŸ¬í•œ ë¶„ë¥˜ì— í•´ë‹¹ë˜ì§€ 않는다면 í–‰ìš´ì„ ë¹ˆë‹¤. 여러분 스스로 ì–´ë–»ê²Œë“ +해야만 한다). ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„ê°€ íŠ¸ë¦¬ì— ìžˆê²Œë˜ë©´ ì»¤ë„ ì¸í„°íŽ˜ì´ìŠ¤ê°€ +변경ë˜ë”ë¼ë„ 가장 ë¨¼ì € 커ë„ì— ë³€ê²½ì„ ê°€í–ˆë˜ ì‚¬ëžŒì— ì˜í•´ì„œ ìˆ˜ì •ë 것ì´ë‹¤. +ì´ê²ƒì€ ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„ê°€ ì—¬ëŸ¬ë¶„ì˜ ë³„ë‹¤ë¥¸ ë…¸ë ¥ì—†ì´ í•ìƒ 빌드가 가능하며 +ë™ìž‘하는 ê²ƒì„ ë³´ìž¥í•œë‹¤. + +ë©”ì¸ ì»¤ë„ íŠ¸ë¦¬ì— ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„를 ë°˜ì˜í•˜ë©´ 얻게 ë˜ëŠ” 장ì ë“¤ì€ ë‹¤ìŒê³¼ 같다. + - ê´€ë¦¬ì˜ ë“œëŠ” 비용(ì›ëž˜ 개발ìžì˜)ì€ ì¤„ì–´ì¤„ë©´ì„œ ë“œë¼ì´ë²„ì˜ ì§ˆì€ í–¥ìƒë 것ì´ë‹¤. + - 다른 개발ìžë“¤ì´ ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„ì— ê¸°ëŠ¥ë“¤ì„ ì¶”ê°€ í• ê²ƒì´ë‹¤. + - 다른 ì‚¬ëžŒë“¤ì€ ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„ì— ë²„ê·¸ë¥¼ ë°œê²¬í•˜ê³ ìˆ˜ì •í• ê²ƒì´ë‹¤. + - 다른 ì‚¬ëžŒë“¤ì€ ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„ì˜ ê°œì„ ì ì„ ì°¾ì„ ì¤„ 것ì´ë‹¤. + - 외부 ì¸í„°íŽ˜ì´ìŠ¤ 변경으로 ì¸í•´ ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„ì˜ ìˆ˜ì •ì´ í•„ìš”í•˜ë‹¤ë©´ 다른 + ì‚¬ëžŒë“¤ì´ ë“œë¼ì´ë²„를 ì—…ë°ì´íŠ¸í• 것ì´ë‹¤. + - ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„는 별다른 ë…¸ë ¥ ì—†ì´ ëª¨ë“ ë¦¬ëˆ…ìŠ¤ ë°°í¬íŒì— ìžë™ì 으로 + 추가ë 것ì´ë‹¤. + +리눅스는 다른 ìš´ì˜ ì²´ì œë³´ë‹¤ "쉽게 쓸수 있는(out of the box)" ë§Žì€ ë‹¤ë¥¸ ìž¥ì¹˜ë“¤ì„ +지ì›í•˜ê³ ì–´ë–¤ 다른 ìš´ì˜ ì²´ì œë³´ë‹¤ 다양한 아키í…ì³ìœ„ì—ì„œ ì´ëŸ¬í•œ ìž¥ì¹˜ë“¤ì„ ì§€ì›í•˜ê¸° ë•Œë¬¸ì— +ì´ëŸ¬í•œ ì¦ëª…ëœ ê°œë°œ 모ë¸ì€ í‹€ë¦¼ì—†ì´ ë°”ë¡œ ê°€ê³ ìžˆëŠ” 것ì´ë‹¤. + + + +------ + +ì´ ë¬¸ì„œì˜ ì´ˆì•ˆì„ ê²€í† í•´ì£¼ê³ ì½”ë©˜íŠ¸ 해준 Randy Dunlap, Andrew Morton, David Brownell, +Hanna Linder, Robert Love, ê·¸ë¦¬ê³ Nishanth Aravamudanì—게 ê°ì‚¬í•œë‹¤. diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt index 7885ab2d5f5..722d4e7fbeb 100644 --- a/Documentation/lguest/lguest.txt +++ b/Documentation/lguest/lguest.txt @@ -109,10 +109,6 @@ Running Lguest: See http://linux-net.osdl.org/index.php/Bridge for general information on how to get bridging working. -- You can also create an inter-guest network using - "--sharenet=<filename>": any two guests using the same file are on - the same network. This file is created if it does not exist. - There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest Good luck! diff --git a/Documentation/nfsroot.txt b/Documentation/nfsroot.txt index 16a7cae2721..9b956a96936 100644 --- a/Documentation/nfsroot.txt +++ b/Documentation/nfsroot.txt @@ -92,8 +92,14 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf> autoconfiguration. The <autoconf> parameter can appear alone as the value to the `ip' - parameter (without all the ':' characters before) in which case auto- - configuration is used. + parameter (without all the ':' characters before). If the value is + "ip=off" or "ip=none", no autoconfiguration will take place, otherwise + autoconfiguration will take place. The most common way to use this + is "ip=dhcp". + + Note that "ip=off" is not the same thing as "ip=::::::off", because in + the latter autoconfiguration will take place if any of DHCP, BOOTP or RARP + are compiled in the kernel. <client-ip> IP address of the client. @@ -142,7 +148,7 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf> into the kernel will be used, regardless of the value of this option. - off or none: don't use autoconfiguration (default) + off or none: don't use autoconfiguration on or any: use any protocol available in the kernel dhcp: use DHCP bootp: use BOOTP diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index b89570c3043..6f31f0a247d 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -34,6 +34,8 @@ Currently, these files are in /proc/sys/vm: - oom_kill_allocating_task - mmap_min_address - numa_zonelist_order +- nr_hugepages +- nr_overcommit_hugepages ============================================================== @@ -305,3 +307,20 @@ will select "node" order in following case. Otherwise, "zone" order will be selected. Default order is recommended unless this is causing problems for your system/application. + +============================================================== + +nr_hugepages + +Change the minimum size of the hugepage pool. + +See Documentation/vm/hugetlbpage.txt + +============================================================== + +nr_overcommit_hugepages + +Change the maximum size of the hugepage pool. The maximum is +nr_hugepages + nr_overcommit_hugepages. + +See Documentation/vm/hugetlbpage.txt diff --git a/Documentation/tipar.txt b/Documentation/tipar.txt deleted file mode 100644 index 67133baef6e..00000000000 --- a/Documentation/tipar.txt +++ /dev/null @@ -1,93 +0,0 @@ - - Parallel link cable for Texas Instruments handhelds - =================================================== - - -Author: Romain Lievin -Homepage: http://lpg.ticalc.org/prj_tidev/index.html - - -INTRODUCTION: - -This is a driver for the very common home-made parallel link cable, a cable -designed for connecting TI8x/9x graphing calculators (handhelds) to a computer -or workstation (Alpha, Sparc). Given that driver is built on parport, the -parallel port abstraction layer, this driver is architecture-independent. - -It can also be used with another device plugged on the same port (such as a -ZIP drive). I have a 100MB ZIP and both of them work fine! - -If you need more information, please visit the 'TI drivers' homepage at the URL -above. - -WHAT YOU NEED: - -A TI calculator and a program capable of communicating with your calculator. - -TiLP will work for sure (since I am its developer!). yal92 may be able to use -it by changing tidev for tipar (may require some hacking...). - -HOW TO USE IT: - -You must have first compiled parport support (CONFIG_PARPORT_DEV): either -compiled in your kernel, either as a module. - -Next, (as root): - - modprobe parport - modprobe tipar - -If it is not already there (it usually is), create the device: - - mknod /dev/tipar0 c 115 0 - mknod /dev/tipar1 c 115 1 - mknod /dev/tipar2 c 115 2 - -You will have to set permissions on this device to allow you to read/write -from it: - - chmod 666 /dev/tipar[0..2] - -Now you are ready to run a linking program such as TiLP. Be sure to configure -it properly (RTFM). - -MODULE PARAMETERS: - - You can set these with: modprobe tipar NAME=VALUE - There is currently no way to set these on a per-cable basis. - - NAME: timeout - TYPE: integer - DEFAULT: 15 - DESC: Timeout value in tenth of seconds. If no data is available once this - time has expired then the driver will return with a timeout error. - - NAME: delay - TYPE: integer - DEFAULT: 10 - DESC: Inter-bit delay in micro-seconds. A lower value gives an higher data - rate but makes transmission less reliable. - -These parameters can be changed at run time by any program via ioctl(2) calls -as listed in ./include/linux/ticable.h. - -Rather than write 50 pages describing the ioctl() and so on, it is -perhaps more useful you look at ticables library (dev_link.c) that demonstrates -how to use them, and demonstrates the features of the driver. This is -probably a lot more useful to people interested in writing applications -that will be using this driver. - -QUIRKS/BUGS: - -None. - -HOW TO CONTACT US: - -You can email me at roms@lpg.ticalc.org. Please prefix the subject line -with "TIPAR: " so that I am certain to notice your message. -You can also mail JB at jb@jblache.org. He packaged these drivers for Debian. - -CREDITS: - -The code is based on tidev.c & parport.c. -The driver has been developed independently of Texas Instruments. diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index 51ccc48aa76..f962d01bea2 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -30,9 +30,10 @@ alignment and size of the arguments to the above system calls. The output of "cat /proc/meminfo" will have lines like: ..... -HugePages_Total: xxx -HugePages_Free: yyy -HugePages_Rsvd: www +HugePages_Total: vvv +HugePages_Free: www +HugePages_Rsvd: xxx +HugePages_Surp: yyy Hugepagesize: zzz kB where: @@ -42,6 +43,10 @@ allocated. HugePages_Rsvd is short for "reserved," and is the number of hugepages for which a commitment to allocate from the pool has been made, but no allocation has yet been made. It's vaguely analogous to overcommit. +HugePages_Surp is short for "surplus," and is the number of hugepages in +the pool above the value in /proc/sys/vm/nr_hugepages. The maximum +number of surplus hugepages is controlled by +/proc/sys/vm/nr_overcommit_hugepages. /proc/filesystems should also show a filesystem of type "hugetlbfs" configured in the kernel. @@ -71,7 +76,25 @@ or failure of allocation depends on the amount of physically contiguous memory that is preset in system at this time. System administrators may want to put this command in one of the local rc init files. This will enable the kernel to request huge pages early in the boot process (when the possibility -of getting physical contiguous pages is still very high). +of getting physical contiguous pages is still very high). In either +case, adminstrators will want to verify the number of hugepages actually +allocated by checking the sysctl or meminfo. + +/proc/sys/vm/nr_overcommit_hugepages indicates how large the pool of +hugepages can grow, if more hugepages than /proc/sys/vm/nr_hugepages are +requested by applications. echo'ing any non-zero value into this file +indicates that the hugetlb subsystem is allowed to try to obtain +hugepages from the buddy allocator, if the normal pool is exhausted. As +these surplus hugepages go out of use, they are freed back to the buddy +allocator. + +Caveat: Shrinking the pool via nr_hugepages while a surplus is in effect +will allow the number of surplus huge pages to exceed the overcommit +value, as the pool hugepages (which must have been in use for a surplus +hugepages to be allocated) will become surplus hugepages. As long as +this condition holds, however, no more surplus huge pages will be +allowed on the system until one of the two sysctls are increased +sufficiently, or the surplus huge pages go out of use and are freed. If the user applications are going to request hugepages using mmap system call, then it is required that system administrator mount a file system of @@ -94,8 +117,8 @@ provided on command line then no limits are set. For size and nr_inodes options, you can use [G|g]/[M|m]/[K|k] to represent giga/mega/kilo. For example, size=2K has the same meaning as size=2048. -read and write system calls are not supported on files that reside on hugetlb -file systems. +While read system calls are supported on files that reside on hugetlb +file systems, write system calls are not. Regular chown, chgrp, and chmod commands (with right permissions) could be used to change the file attributes on hugetlbfs. diff --git a/MAINTAINERS b/MAINTAINERS index f3d7256bc74..3c7db6222f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -88,7 +88,6 @@ S: Status, one of the following: P: Mike Phillips M: mikep@linuxtr.net L: netdev@vger.kernel.org -L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -167,7 +166,6 @@ S: Maintained A2232 SERIAL BOARD DRIVER P: Enver Haase -M: ehaase@inf.fu-berlin.de M: A2232@gmx.net L: linux-m68k@lists.linux-m68k.org S: Maintained @@ -439,7 +437,7 @@ S: Maintained ARM/ATMEL AT91RM9200 ARM ARCHITECTURE P: Andrew Victor -M: linux@maxim.org.za +M: andrew@sanpeople.com L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://maxim.org.za/at91_26.html S: Maintained @@ -2064,7 +2062,7 @@ S: Maintained IOC3 SERIAL DRIVER P: Pat Gefre M: pfg@sgi.com -L: linux-kernel@linux-mips.org +L: linux-mips@linux-mips.org S: Maintained IP MASQUERADING: @@ -2491,6 +2489,12 @@ M: mtk.manpages@gmail.com W: ftp://ftp.kernel.org/pub/linux/docs/manpages S: Maintained +MARVELL LIBERTAS WIRELESS DRIVER +P: Dan Williams +M: dcbw@redhat.com +L: libertas-dev@lists.infradead.org +S: Maintained + MARVELL MV643XX ETHERNET DRIVER P: Dale Farnsworth M: dale@farnsworth.org @@ -2753,8 +2757,10 @@ S: Maintained NFS CLIENT P: Trond Myklebust -M: trond.myklebust@fys.uio.no -L: linux-kernel@vger.kernel.org +M: Trond.Myklebust@netapp.com +L: linux-nfs@vger.kernel.org +W: http://client.linux-nfs.org +T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git S: Maintained NI5010 NETWORK DRIVER @@ -2815,7 +2821,6 @@ M: p2@ace.ulyssis.student.kuleuven.ac.be P: Mike Phillips M: mikep@linuxtr.net L: netdev@vger.kernel.org -L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -2953,7 +2958,7 @@ S: Supported PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@lists.infradead.org -L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia +W: http://lists.infradead.org/mailman/listinfo/linux-pcmcia T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git S: Maintained @@ -3702,11 +3707,6 @@ M: nagar@watson.ibm.com L: linux-kernel@vger.kernel.org S: Maintained -TI PARALLEL LINK CABLE DRIVER -P: Romain Lievin -M: roms@lpg.ticalc.org -S: Maintained - TIPC NETWORK LAYER P: Per Liden M: per.liden@ericsson.com @@ -3731,7 +3731,6 @@ TOKEN-RING NETWORK DRIVER P: Mike Phillips M: mikep@linuxtr.net L: netdev@vger.kernel.org -L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -4049,7 +4048,7 @@ S: Maintained USER-MODE LINUX P: Jeff Dike -M: jdike@karaya.com +M: jdike@addtoit.com L: user-mode-linux-devel@lists.sourceforge.net L: user-mode-linux-user@lists.sourceforge.net W: http://user-mode-linux.sourceforge.net @@ -4280,13 +4279,6 @@ L: mjpeg-users@lists.sourceforge.net W: http://mjpeg.sourceforge.net/driver-zoran/ S: Maintained -ZR36120 VIDEO FOR LINUX DRIVER -P: Pauline Middelink -M: middelin@polyware.nl -W: http://www.polyware.nl/~middelin/En/hobbies.html -W: http://www.polyware.nl/~middelin/hobbies.html -S: Maintained - ZS DECSTATION Z85C30 SERIAL DRIVER P: Maciej W. Rozycki M: macro@linux-mips.org @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 24 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc6 NAME = Arr Matey! A Hairy Bilge Rat! # *DOCUMENTATION* diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile index 63104ebd180..4e1a8e2c454 100644 --- a/arch/alpha/Makefile +++ b/arch/alpha/Makefile @@ -14,13 +14,13 @@ LDFLAGS_vmlinux := -static -N #-relax CHECKFLAGS += -D__alpha__ -m64 cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data -cpuflags-$(CONFIG_ALPHA_EV67) := -mcpu=ev67 -cpuflags-$(CONFIG_ALPHA_EV6) := -mcpu=ev6 +cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4 +cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5 +cpuflags-$(CONFIG_ALPHA_EV56) := -mcpu=ev56 cpuflags-$(CONFIG_ALPHA_POLARIS) := -mcpu=pca56 cpuflags-$(CONFIG_ALPHA_SX164) := -mcpu=pca56 -cpuflags-$(CONFIG_ALPHA_EV56) := -mcpu=ev56 -cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5 -cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4 +cpuflags-$(CONFIG_ALPHA_EV6) := -mcpu=ev6 +cpuflags-$(CONFIG_ALPHA_EV67) := -mcpu=ev67 # If GENERIC, make sure to turn off any instruction set extensions that # the host compiler might have on by default. Given that EV4 and EV5 # have the same instruction set, prefer EV5 because an EV5 schedule is diff --git a/arch/alpha/kernel/err_ev7.c b/arch/alpha/kernel/err_ev7.c index bc799f72d8c..68cd493f54c 100644 --- a/arch/alpha/kernel/err_ev7.c +++ b/arch/alpha/kernel/err_ev7.c @@ -273,7 +273,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header) struct el_subpacket_handler ev7_pal_subpacket_handler = SUBPACKET_HANDLER_INIT(EL_CLASS__PAL, ev7_process_pal_subpacket); -void +void __init ev7_register_error_handlers(void) { int i; diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c index 497877bf201..413bf37eb09 100644 --- a/arch/alpha/kernel/err_marvel.c +++ b/arch/alpha/kernel/err_marvel.c @@ -1152,7 +1152,7 @@ marvel_machine_check(u64 vector, u64 la_ptr) mb(); } -void +void __init marvel_register_error_handlers(void) { ev7_register_error_handlers(); diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c index 6f3867877d9..257449ed15e 100644 --- a/arch/alpha/kernel/err_titan.c +++ b/arch/alpha/kernel/err_titan.c @@ -564,7 +564,7 @@ static struct el_subpacket_handler titan_subpacket_handler = SUBPACKET_HANDLER_INIT(EL_CLASS__REGATTA_FAMILY, el_process_regatta_subpacket); -void +void __init titan_register_error_handlers(void) { size_t i; diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h index 0caa45aa128..466c9dff818 100644 --- a/arch/alpha/kernel/machvec_impl.h +++ b/arch/alpha/kernel/machvec_impl.h @@ -134,7 +134,7 @@ #define __initmv __initdata #define ALIAS_MV(x) #else -#define __initmv +#define __initmv __initdata_refok /* GCC actually has a syntax for defining aliases, but is under some delusion that you shouldn't be able to declare it extern somewhere diff --git a/arch/alpha/lib/ev6-stxncpy.S b/arch/alpha/lib/ev6-stxncpy.S index b581a7af245..1aa6e97e04b 100644 --- a/arch/alpha/lib/ev6-stxncpy.S +++ b/arch/alpha/lib/ev6-stxncpy.S @@ -362,10 +362,10 @@ $unaligned: extql t2, a1, t2 # U : cmpbge zero, t1, t8 # E : is there a zero? - andnot t2, t6, t12 # E : dest mask for a single word copy + andnot t2, t6, t2 # E : dest mask for a single word copy or t8, t10, t5 # E : test for end-of-count too - cmpbge zero, t12, t3 # E : + cmpbge zero, t2, t3 # E : cmoveq a2, t5, t8 # E : Latency=2, extra map slot nop # E : keep with cmoveq andnot t8, t3, t8 # E : (stall) @@ -379,13 +379,13 @@ $unaligned: negq t8, t6 # E : build bitmask of bytes <= zero mskqh t1, t4, t1 # U : - and t6, t8, t2 # E : - subq t2, 1, t6 # E : (stall) - or t6, t2, t8 # E : (stall) - zapnot t12, t8, t12 # U : prepare source word; mirror changes (stall) + and t6, t8, t12 # E : + subq t12, 1, t6 # E : (stall) + or t6, t12, t8 # E : (stall) + zapnot t2, t8, t2 # U : prepare source word; mirror changes (stall) zapnot t1, t8, t1 # U : to source validity mask - andnot t0, t12, t0 # E : zero place for source to reside + andnot t0, t2, t0 # E : zero place for source to reside or t0, t1, t0 # E : and put it there (stall both t0, t1) stq_u t0, 0(a0) # L : (stall) diff --git a/arch/alpha/lib/strncpy.S b/arch/alpha/lib/strncpy.S index bbdef1be5f9..a46f7f3ad8c 100644 --- a/arch/alpha/lib/strncpy.S +++ b/arch/alpha/lib/strncpy.S @@ -35,7 +35,7 @@ strncpy: or $3, $24, $3 # clear the bits between the last or $4, $27, $4 # written byte and the last byte in COUNT - andnot $4, $3, $4 + andnot $3, $4, $4 zap $1, $4, $1 stq_u $1, 0($16) diff --git a/arch/alpha/lib/stxncpy.S b/arch/alpha/lib/stxncpy.S index da1a72740d2..3dece25283a 100644 --- a/arch/alpha/lib/stxncpy.S +++ b/arch/alpha/lib/stxncpy.S @@ -315,9 +315,9 @@ $unaligned: extql t2, a1, t2 # e0 : cmpbge zero, t1, t8 # .. e1 : is there a zero? - andnot t2, t6, t12 # e0 : dest mask for a single word copy + andnot t2, t6, t2 # e0 : dest mask for a single word copy or t8, t10, t5 # .. e1 : test for end-of-count too - cmpbge zero, t12, t3 # e0 : + cmpbge zero, t2, t3 # e0 : cmoveq a2, t5, t8 # .. e1 : andnot t8, t3, t8 # e0 : beq t8, $u_head # .. e1 (zdb) @@ -330,14 +330,14 @@ $unaligned: ldq_u t0, 0(a0) # e0 : negq t8, t6 # .. e1 : build bitmask of bytes <= zero mskqh t1, t4, t1 # e0 : - and t6, t8, t2 # .. e1 : - subq t2, 1, t6 # e0 : - or t6, t2, t8 # e1 : + and t6, t8, t12 # .. e1 : + subq t12, 1, t6 # e0 : + or t6, t12, t8 # e1 : - zapnot t12, t8, t12 # e0 : prepare source word; mirror changes + zapnot t2, t8, t2 # e0 : prepare source word; mirror changes zapnot t1, t8, t1 # .. e1 : to source validity mask - andnot t0, t12, t0 # e0 : zero place for source to reside + andnot t0, t2, t0 # e0 : zero place for source to reside or t0, t1, t0 # e1 : and put it there stq_u t0, 0(a0) # e0 : ret (t9) # .. e1 : diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a7e9fea978a..c4de2d4664d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -537,7 +537,7 @@ config ISA_DMA_API bool config PCI - bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 + bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -558,6 +558,12 @@ config PCI_HOST_VIA82C505 depends on PCI && ARCH_SHARK default y +config PCI_HOST_ITE8152 + bool + depends on PCI && MACH_ARMCORE + default y + select DMABOUNCE + source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b9b03eda70e..5cac46a19bb 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -31,7 +31,7 @@ .macro loadsp, rb .endm .macro writeb, ch, rb - mcr p14, 0, \ch, c0, c1, 0 + mcr p14, 0, \ch, c1, c0, 0 .endm #endif diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index c03de9bfd76..97b7dc13d9a 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -70,8 +70,6 @@ static inline void it8152_irq(int irq) { struct irq_desc *desc; - printk(KERN_DEBUG "===> %s: irq=%d\n", __FUNCTION__, irq); - desc = irq_desc + irq; desc_handle_irq(irq, desc); } @@ -106,8 +104,6 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc) int bits_pd, bits_lp, bits_ld; int i; - printk(KERN_DEBUG "=> %s: irq = %d\n", __FUNCTION__, irq); - while (1) { /* Read all */ bits_pd = __raw_readl(IT8152_INTC_PDCNIRR); @@ -293,8 +289,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) */ int pci_set_dma_mask(struct pci_dev *dev, u64 mask) { - printk(KERN_DEBUG "%s: %s %llx\n", - __FUNCTION__, dev->dev.bus_id, mask); + dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask); if (mask >= PHYS_OFFSET + SZ_64M - 1) return 0; @@ -304,8 +299,7 @@ int pci_set_dma_mask(struct pci_dev *dev, u64 mask) int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) { - printk(KERN_DEBUG "%s: %s %llx\n", - __FUNCTION__, dev->dev.bus_id, mask); + dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask); if (mask >= PHYS_OFFSET + SZ_64M - 1) return 0; diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index c1271c44924..f6d66dce685 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -442,7 +442,8 @@ static int ixp4xx_set_next_event(unsigned long evt, static void ixp4xx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - unsigned long opts, osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; + unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; + unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; switch (mode) { case CLOCK_EVT_MODE_PERIODIC: @@ -455,12 +456,15 @@ static void ixp4xx_set_mode(enum clock_event_mode mode, opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT; break; case CLOCK_EVT_MODE_SHUTDOWN: + opts &= ~IXP4XX_OST_ENABLE; + break; + case CLOCK_EVT_MODE_RESUME: + opts |= IXP4XX_OST_ENABLE; + break; case CLOCK_EVT_MODE_UNUSED: default: osrt = opts = 0; break; - case CLOCK_EVT_MODE_RESUME: - break; } *IXP4XX_OSRT1 = osrt | opts; diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index 878d3b9b863..15c4e0df3e1 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -40,7 +40,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, { unsigned int sz = SZ_64M >> PAGE_SHIFT; - printk(KERN_INFO "Adjusting zones for CM-x270\n"); + pr_info("Adjusting zones for CM-x270\n"); /* * Only adjust if > 64M on current system @@ -104,8 +104,7 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; - printk(KERN_DEBUG "===> %s: %s slot=%x, pin=%x\n", __FUNCTION__, - pci_name(dev), slot, pin); + dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin); irq = it8152_pci_map_irq(dev, slot, pin); if (irq) @@ -141,14 +140,13 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) return(0); } -static struct pci_bus * __init -cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys) +static void cmx270_pci_preinit(void) { - printk(KERN_INFO "Initializing CM-X270 PCI subsystem\n"); + pr_info("Initializing CM-X270 PCI subsystem\n"); __raw_writel(0x800, IT8152_PCI_CFG_ADDR); if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) { - printk(KERN_INFO "PCI Bridge found.\n"); + pr_info("PCI Bridge found.\n"); /* set PCI I/O base at 0 */ writel(0x848, IT8152_PCI_CFG_ADDR); @@ -163,7 +161,7 @@ cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys) /* CardBus Controller on ATXbase baseboard */ writel(0x4000, IT8152_PCI_CFG_ADDR); if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) { - printk(KERN_INFO "CardBus Bridge found.\n"); + pr_info("CardBus Bridge found.\n"); /* Configure socket 0 */ writel(0x408C, IT8152_PCI_CFG_ADDR); @@ -196,7 +194,6 @@ cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys) writel(0xb0000000, IT8152_PCI_CFG_DATA); } } - return it8152_pci_scan_bus(nr, sys); } static struct hw_pci cmx270_pci __initdata = { @@ -204,7 +201,8 @@ static struct hw_pci cmx270_pci __initdata = { .map_irq = cmx270_pci_map_irq, .nr_controllers = 1, .setup = it8152_pci_setup, - .scan = cmx270_pci_scan_bus, + .scan = it8152_pci_scan_bus, + .preinit = cmx270_pci_preinit, }; static int __init cmx270_init_pci(void) diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index bc859a311ea..45bf04eb7d7 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -2034,7 +2034,8 @@ sba_init(void) if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb")) return 0; -#if defined(CONFIG_IA64_GENERIC) && defined(CONFIG_CRASH_DUMP) +#if defined(CONFIG_IA64_GENERIC) && defined(CONFIG_CRASH_DUMP) && \ + defined(CONFIG_PROC_FS) /* If we are booting a kdump kernel, the sba_iommu will * cause devices that were not shutdown properly to MCA * as soon as they are turned back on. Our only option for diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c index f6ae3ec9381..3e35987af45 100644 --- a/arch/ia64/ia32/binfmt_elf32.c +++ b/arch/ia64/ia32/binfmt_elf32.c @@ -52,33 +52,29 @@ extern struct page *ia32_shared_page[]; extern unsigned long *ia32_gdt; extern struct page *ia32_gate_page; -struct page * -ia32_install_shared_page (struct vm_area_struct *vma, unsigned long address, int *type) +int +ia32_install_shared_page (struct vm_area_struct *vma, struct vm_fault *vmf) { - struct page *pg = ia32_shared_page[smp_processor_id()]; - get_page(pg); - if (type) - *type = VM_FAULT_MINOR; - return pg; + vmf->page = ia32_shared_page[smp_processor_id()]; + get_page(vmf->page); + return 0; } -struct page * -ia32_install_gate_page (struct vm_area_struct *vma, unsigned long address, int *type) +int +ia32_install_gate_page (struct vm_area_struct *vma, struct vm_fault *vmf) { - struct page *pg = ia32_gate_page; - get_page(pg); - if (type) - *type = VM_FAULT_MINOR; - return pg; + vmf->page = ia32_gate_page; + get_page(vmf->page); + return 0; } static struct vm_operations_struct ia32_shared_page_vm_ops = { - .nopage = ia32_install_shared_page + .fault = ia32_install_shared_page }; static struct vm_operations_struct ia32_gate_page_vm_ops = { - .nopage = ia32_install_gate_page + .fault = ia32_install_gate_page }; void diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 4e5e27540e2..d3a41d5f8d1 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -1176,6 +1176,7 @@ tlb_purge_done: RESTORE_REG(cr.dcr, r25, r17);; RESTORE_REG(cr.iva, r25, r17);; RESTORE_REG(cr.pta, r25, r17);; + srlz.d;; // required not to violate RAW dependency RESTORE_REG(cr.itv, r25, r17);; RESTORE_REG(cr.pmv, r25, r17);; RESTORE_REG(cr.cmcv, r25, r17);; diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index 00a4599e5f4..0b52f19ed04 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -200,7 +200,7 @@ assign_irq_vector (int irq) { unsigned long flags; int vector, cpu; - cpumask_t domain; + cpumask_t domain = CPU_MASK_NONE; vector = -ENOSPC; @@ -340,7 +340,7 @@ int create_irq(void) { unsigned long flags; int irq, vector, cpu; - cpumask_t domain; + cpumask_t domain = CPU_MASK_NONE; irq = vector = -ENOSPC; spin_lock_irqsave(&vector_lock, flags); diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 10b48cd15a8..6dbf5919d2d 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -75,6 +75,7 @@ #include <linux/workqueue.h> #include <linux/cpumask.h> #include <linux/kdebug.h> +#include <linux/cpu.h> #include <asm/delay.h> #include <asm/machvec.h> @@ -1813,6 +1814,36 @@ ia64_mca_cpu_init(void *cpu_data) PAGE_KERNEL)); } +static void __cpuinit ia64_mca_cmc_vector_adjust(void *dummy) +{ + unsigned long flags; + + local_irq_save(flags); + if (!cmc_polling_enabled) + ia64_mca_cmc_vector_enable(NULL); + local_irq_restore(flags); +} + +static int __cpuinit mca_cpu_callback(struct notifier_block *nfb, + unsigned long action, + void *hcpu) +{ + int hotcpu = (unsigned long) hcpu; + + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + smp_call_function_single(hotcpu, ia64_mca_cmc_vector_adjust, + NULL, 1, 0); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block mca_cpu_notifier __cpuinitdata = { + .notifier_call = mca_cpu_callback +}; + /* * ia64_mca_init * @@ -1996,6 +2027,8 @@ ia64_mca_late_init(void) if (!mca_init) return 0; + register_hotcpu_notifier(&mca_cpu_notifier); + /* Setup the CMCI/P vector and handler */ init_timer(&cmc_poll_timer); cmc_poll_timer.function = ia64_mca_cmc_poll; diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 2418289ee5c..7377d323131 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -27,6 +27,7 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/kdebug.h> +#include <linux/utsname.h> #include <asm/cpu.h> #include <asm/delay.h> @@ -107,8 +108,9 @@ show_regs (struct pt_regs *regs) print_modules(); printk("\nPid: %d, CPU %d, comm: %20s\n", task_pid_nr(current), smp_processor_id(), current->comm); - printk("psr : %016lx ifs : %016lx ip : [<%016lx>] %s\n", - regs->cr_ipsr, regs->cr_ifs, ip, print_tainted()); + printk("psr : %016lx ifs : %016lx ip : [<%016lx>] %s (%s)\n", + regs->cr_ipsr, regs->cr_ifs, ip, print_tainted(), + init_utsname()->release); print_symbol("ip is at %s\n", ip); printk("unat: %016lx pfs : %016lx rsc : %016lx\n", regs->ar_unat, regs->ar_pfs, regs->ar_rsc); @@ -737,6 +739,7 @@ flush_thread (void) ia32_drop_ia64_partial_page_list(current); current->thread.task_size = IA32_PAGE_OFFSET; set_fs(USER_DS); + memset(current->thread.tls_array, 0, sizeof(current->thread.tls_array)); } #endif } diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 4c730099d58..309da3567bc 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -280,15 +280,7 @@ setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratc err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8); /* r15 */ err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip); - if (flags & IA64_SC_FLAG_IN_SYSCALL) { - /* Clear scratch registers if the signal interrupted a system call. */ - err |= __put_user(0, &sc->sc_ar_ccv); /* ar.ccv */ - err |= __put_user(0, &sc->sc_br[7]); /* b7 */ - err |= __put_user(0, &sc->sc_gr[14]); /* r14 */ - err |= __clear_user(&sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */ - err |= __clear_user(&sc->sc_gr[2], 2*8); /* r2-r3 */ - err |= __clear_user(&sc->sc_gr[16], 16*8); /* r16-r31 */ - } else { + if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) { /* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */ err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */ err |= __put_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */ diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c index a7be4f20342..2a90c32024f 100644 --- a/arch/ia64/kernel/uncached.c +++ b/arch/ia64/kernel/uncached.c @@ -118,7 +118,7 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid) for (i = 0; i < (IA64_GRANULE_SIZE / PAGE_SIZE); i++) SetPageUncached(&page[i]); - flush_tlb_kernel_range(uc_addr, uc_adddr + IA64_GRANULE_SIZE); + flush_tlb_kernel_range(uc_addr, uc_addr + IA64_GRANULE_SIZE); status = ia64_pal_prefetch_visibility(PAL_VISIBILITY_PHYSICAL); if (status == PAL_VISIBILITY_OK_REMOTE_NEEDED) { diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index cef164729db..655da240d13 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -10,6 +10,7 @@ * IPI based ptc implementation and A-step IPI implementation. * Rohit Seth <rohit.seth@intel.com> * Ken Chen <kenneth.w.chen@intel.com> + * Christophe de Dinechin <ddd@hp.com>: Avoid ptc.e on memory allocation */ #include <linux/module.h> #include <linux/init.h> @@ -89,9 +90,16 @@ ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, { static DEFINE_SPINLOCK(ptcg_lock); - if (mm != current->active_mm || !current->mm) { - flush_tlb_all(); - return; + struct mm_struct *active_mm = current->active_mm; + + if (mm != active_mm) { + /* Restore region IDs for mm */ + if (mm && active_mm) { + activate_context(mm); + } else { + flush_tlb_all(); + return; + } } /* HW requires global serialization of ptc.ga. */ @@ -107,6 +115,10 @@ ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, } while (start < end); } spin_unlock(&ptcg_lock); + + if (mm != active_mm) { + activate_context(active_mm); + } } void diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index b362d6d6a8c..9456d403402 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. */ #include <linux/module.h> @@ -227,7 +227,7 @@ retry_bteop: BTE_LNSTAT_LOAD(bte), *bte->most_rcnt_na)); if (transfer_stat & IBLS_ERROR) { - bte_status = transfer_stat & ~IBLS_ERROR; + bte_status = BTE_GET_ERROR_STATUS(transfer_stat); } else { bte_status = BTE_SUCCESS; } diff --git a/arch/ia64/sn/kernel/bte_error.c b/arch/ia64/sn/kernel/bte_error.c index 27c5936ccfe..4cb09f3f1ef 100644 --- a/arch/ia64/sn/kernel/bte_error.c +++ b/arch/ia64/sn/kernel/bte_error.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. */ #include <linux/types.h> @@ -148,7 +148,11 @@ int shub2_bte_error_handler(unsigned long _nodepda) for (i = 0; i < BTES_PER_NODE; i++) { bte = &err_nodepda->bte_if[i]; status = BTE_LNSTAT_LOAD(bte); - if ((status & IBLS_ERROR) || !(status & IBLS_BUSY)) + if (status & IBLS_ERROR) { + bte->bh_error = BTE_SHUB2_ERROR(status); + continue; + } + if (!(status & IBLS_BUSY)) continue; mod_timer(recovery_timer, jiffies + (HZ * 5)); BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda, diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index cee9379d44e..e1a3e19d3d9 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -41,7 +41,7 @@ * } else * do desired mmr access * - * According to hw, we can use reads instead of writes to the above addres + * According to hw, we can use reads instead of writes to the above address * * Note this WAR can only to be used for accessing internal MMR's in the * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig index 05d1354aad3..1fe97cccead 100644 --- a/arch/mips/au1000/Kconfig +++ b/arch/mips/au1000/Kconfig @@ -7,7 +7,6 @@ config MIPS_MTX1 bool "4G Systems MTX-1 board" select DMA_NONCOHERENT select HW_HAS_PCI - select RESOURCES_64BIT if PCI select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN @@ -22,7 +21,6 @@ config MIPS_DB1000 select SOC_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_DB1100 @@ -44,7 +42,6 @@ config MIPS_DB1500 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN @@ -54,7 +51,6 @@ config MIPS_DB1550 select HW_HAS_PCI select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_MIRAGE @@ -68,7 +64,6 @@ config MIPS_PB1000 select SOC_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI - select RESOURCES_64BIT if PCI select SWAP_IO_SPACE select SYS_SUPPORTS_LITTLE_ENDIAN @@ -77,7 +72,6 @@ config MIPS_PB1100 select SOC_AU1100 select DMA_NONCOHERENT select HW_HAS_PCI - select RESOURCES_64BIT if PCI select SWAP_IO_SPACE select SYS_SUPPORTS_LITTLE_ENDIAN @@ -86,7 +80,6 @@ config MIPS_PB1200 select SOC_AU1200 select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_PB1500 @@ -94,7 +87,6 @@ config MIPS_PB1500 select SOC_AU1500 select DMA_NONCOHERENT select HW_HAS_PCI - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_PB1550 @@ -103,7 +95,6 @@ config MIPS_PB1550 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_XXS1500 diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c index 9be99a68932..6fa70a36a25 100644 --- a/arch/mips/au1000/common/pci.c +++ b/arch/mips/au1000/common/pci.c @@ -39,15 +39,15 @@ /* TBD */ static struct resource pci_io_resource = { - .start = (resource_size_t)PCI_IO_START, - .end = (resource_size_t)PCI_IO_END, + .start = PCI_IO_START, + .end = PCI_IO_END, .name = "PCI IO space", .flags = IORESOURCE_IO }; static struct resource pci_mem_resource = { - .start = (resource_size_t)PCI_MEM_START, - .end = (resource_size_t)PCI_MEM_END, + .start = PCI_MEM_START, + .end = PCI_MEM_END, .name = "PCI memory space", .flags = IORESOURCE_MEM }; diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index a90d425d465..d885e3848ec 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -137,12 +137,11 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) #ifdef CONFIG_PCI { - u32 start, end; + u32 start = (u32)Au1500_PCI_MEM_START; + u32 end = (u32)Au1500_PCI_MEM_END; - start = (u32)Au1500_PCI_MEM_START; - end = (u32)Au1500_PCI_MEM_END; - /* check for pci memory window */ - if ((phys_addr >= start) && ((phys_addr + size) < end)) + /* Check for PCI memory window */ + if (phys_addr >= start && (phys_addr + size - 1) <= end) return (phys_t) ((phys_addr - start) + Au1500_PCI_MEM_START); } diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c index fa819fccd5d..4a570e7145f 100644 --- a/arch/mips/cobalt/time.c +++ b/arch/mips/cobalt/time.c @@ -27,9 +27,28 @@ void __init plat_time_init(void) { + u32 start, end; + int i = HZ / 10; + setup_pit_timer(); gt641xx_set_base_clock(GT641XX_BASE_CLOCK); - mips_timer_state = gt641xx_timer0_state; + /* + * MIPS counter frequency is measured during a 100msec interval + * using GT64111 timer0. + */ + while (!gt641xx_timer0_state()) + ; + + start = read_c0_count(); + + while (i--) + while (!gt641xx_timer0_state()) + ; + + end = read_c0_count(); + + mips_hpt_frequency = (end - start) * 10; + printk(KERN_INFO "MIPS counter frequency %dHz\n", mips_hpt_frequency); } diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 80b0c99c2cf..3c70c9d16d0 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -76,9 +76,13 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_CEVT_BCM1480=y +CONFIG_CSRC_BCM1480=y CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -91,6 +95,11 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index fbd2d802fdf..4b7e43c9f69 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -49,10 +49,13 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_CEVT_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y @@ -76,6 +79,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set CONFIG_CPU_MIPS32_R2=y @@ -253,6 +260,7 @@ CONFIG_HW_HAS_PCI=y CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y +CONFIG_I8253=y # # PCCARD (PCMCIA/CardBus) support diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 11cb264f59c..2c09a442e5e 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -77,9 +77,8 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) unsigned long status; /* New thread loses kernel privileges. */ - status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|KU_MASK); + status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK); #ifdef CONFIG_64BIT - status &= ~ST0_FR; status |= test_thread_flag(TIF_32BIT_REGS) ? 0 : ST0_FR; #endif status |= KU_USER; diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 52075426c37..1ecfbb7eba6 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -109,10 +109,6 @@ void __cpuinit clockevent_set_clock(struct clock_event_device *cd, cd->mult = (u32) temp; } -void __init __weak plat_time_init(void) -{ -} - /* * This function exists in order to cause an error due to a duplicate * definition if platform code should have its own implementation. The hook diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 23e73d0650a..fcae6675297 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1317,12 +1317,12 @@ void __init per_cpu_trap_init(void) #endif if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV) status_set |= ST0_XX; + if (cpu_has_dsp) + status_set |= ST0_MX; + change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX, status_set); - if (cpu_has_dsp) - set_c0_status(ST0_MX); - #ifdef CONFIG_CPU_MIPSR2 if (cpu_has_mips_r2) { unsigned int enable = 0x0000000f; diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c index 5d600054090..2a0057cfc30 100644 --- a/arch/mips/mips-boards/generic/display.c +++ b/arch/mips/mips-boards/generic/display.c @@ -37,9 +37,9 @@ void mips_display_message(const char *str) for (i = 0; i <= 14; i=i+2) { if (*str) - writel(*str++, display + i); + __raw_writel(*str++, display + i); else - writel(' ', display + i); + __raw_writel(' ', display + i); } } diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index dc272c18823..2c5c27c8e86 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -169,6 +169,7 @@ void __init prom_meminit(void) void __init prom_free_prom_memory(void) { +#if 0 /* for now ... */ unsigned long addr; int i; @@ -180,4 +181,5 @@ void __init prom_free_prom_memory(void) free_init_pages("prom memory", addr, addr + boot_mem_map.map[i].size); } +#endif } diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 589b745d822..6e6981fd793 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -242,6 +242,8 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, for (i = 0; i < PCI_NUM_RESOURCES; i++) { if (!dev->resource[i].start) continue; + if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) + continue; if (dev->resource[i].flags & IORESOURCE_IO) offset = hose->io_offset; else if (dev->resource[i].flags & IORESOURCE_MEM) diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c index 11f98476788..7df36dbe65c 100644 --- a/arch/mips/qemu/q-irq.c +++ b/arch/mips/qemu/q-irq.c @@ -33,5 +33,5 @@ void __init arch_init_irq(void) mips_cpu_irq_init(); init_i8259_irqs(); - set_c0_status(0x8400); + set_c0_status(0x400); } diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index a31b7a030a6..5eae305215d 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:30 2007 +# Linux kernel version: 2.6.24-rc5 +# Thu Dec 13 22:40:57 2007 # # CONFIG_PPC64 is not set @@ -491,7 +491,7 @@ CONFIG_MII=y CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y -# CONFIG_FS_ENET_MDIO_FCC is not set +CONFIG_FS_ENET_MDIO_FCC=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 142d206d687..a3bfbb65a93 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:49:09 2007 +# Linux kernel version: 2.6.24-rc5 +# Thu Dec 13 22:39:18 2007 # # CONFIG_PPC64 is not set @@ -548,7 +548,7 @@ CONFIG_MII=y CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y -# CONFIG_FS_ENET_MDIO_FCC is not set +CONFIG_FS_ENET_MDIO_FCC=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 5bd547ecd60..0b5469fb6e0 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -157,7 +157,7 @@ CONFIG_PS3_HTAB_SIZE=20 CONFIG_PS3_USE_LPAR_ADDR=y CONFIG_PS3_VUART=y CONFIG_PS3_PS3AV=y -CONFIG_PS3_SYS_MANAGER=m +CONFIG_PS3_SYS_MANAGER=y CONFIG_PS3_STORAGE=y CONFIG_PS3_DISK=y CONFIG_PS3_ROM=y diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index c6b1aa3efbb..13ebeb2d71e 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -45,10 +45,6 @@ #include <asm/signal.h> #include <asm/dcr.h> -#ifdef CONFIG_8xx -#include <asm/commproc.h> -#endif - #ifdef CONFIG_PPC64 EXPORT_SYMBOL(local_irq_restore); #endif @@ -172,14 +168,6 @@ EXPORT_SYMBOL(console_drivers); EXPORT_SYMBOL(cacheable_memcpy); #endif -#ifdef CONFIG_8xx -EXPORT_SYMBOL(cpm_install_handler); -EXPORT_SYMBOL(cpm_free_handler); -#endif /* CONFIG_8xx */ -#if defined(CONFIG_8xx) -EXPORT_SYMBOL(__res); -#endif - #ifdef CONFIG_PPC32 EXPORT_SYMBOL(next_mmu_context); EXPORT_SYMBOL(set_context); diff --git a/arch/powerpc/math-emu/op-2.h b/arch/powerpc/math-emu/op-2.h index b9b06b4c6ea..7d6f17cc292 100644 --- a/arch/powerpc/math-emu/op-2.h +++ b/arch/powerpc/math-emu/op-2.h @@ -59,7 +59,8 @@ else \ { \ X##_f0 = (X##_f1 >> ((N) - _FP_W_TYPE_SIZE) | \ - (((X##_f1 << (sz - (N))) | X##_f0) != 0)); \ + (((X##_f1 << (2 * _FP_W_TYPE_SIZE - (N))) | \ + X##_f0) != 0)); \ X##_f1 = 0; \ } \ } while (0) diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 02c142227b5..e5b40e3e008 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -121,6 +121,7 @@ void process_hvlpevents(void) { struct HvLpEvent * event; + restart: /* If we have recursed, just return */ if (!spin_trylock(&hvlpevent_queue.hq_lock)) return; @@ -146,8 +147,20 @@ void process_hvlpevents(void) if (event->xType < HvLpEvent_Type_NumTypes && lpEventHandler[event->xType]) lpEventHandler[event->xType](event); - else - printk(KERN_INFO "Unexpected Lp Event type=%d\n", event->xType ); + else { + u8 type = event->xType; + + /* + * Don't printk in the spinlock as printk + * may require ack events form the HV to send + * any characters there. + */ + hvlpevent_clear_valid(event); + spin_unlock(&hvlpevent_queue.hq_lock); + printk(KERN_INFO + "Unexpected Lp Event type=%d\n", type); + goto restart; + } hvlpevent_clear_valid(event); } else if (hvlpevent_queue.hq_overflow_pending) diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 67144d1d140..298f1c9679f 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -91,7 +91,7 @@ config PS3_SYS_MANAGER depends on PPC_PS3 tristate "PS3 System Manager driver" if PS3_ADVANCED select PS3_VUART - default m + default y help Include support for the PS3 System Manager. diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c index 0a7054579d9..f7188e2ba66 100644 --- a/arch/powerpc/sysdev/cpm2_common.c +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -61,8 +61,7 @@ cpm2_map_t __iomem *cpm2_immr; of space for CPM as it is larger than on PQ2 */ -void -cpm2_reset(void) +void __init cpm2_reset(void) { #ifdef CONFIG_PPC_85xx cpm2_immr = ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index c9b0d7af64a..ea257e82836 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -2593,3 +2593,15 @@ sun4v_mmustat_info: retl nop .size sun4v_mmustat_info, .-sun4v_mmustat_info + + .globl sun4v_mmu_demap_all + .type sun4v_mmu_demap_all,#function +sun4v_mmu_demap_all: + clr %o0 + clr %o1 + mov HV_MMU_ALL, %o2 + mov HV_FAST_MMU_DEMAP_ALL, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_mmu_demap_all, .-sun4v_mmu_demap_all diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 894b506f963..c39944927f1 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -476,7 +476,7 @@ static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpuma */ static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) { - u64 pstate, ver; + u64 pstate, ver, busy_mask; int nack_busy_id, is_jbus, need_more; if (cpus_empty(mask)) @@ -508,14 +508,20 @@ retry: "i" (ASI_INTR_W)); nack_busy_id = 0; + busy_mask = 0; { int i; for_each_cpu_mask(i, mask) { u64 target = (i << 14) | 0x70; - if (!is_jbus) + if (is_jbus) { + busy_mask |= (0x1UL << (i * 2)); + } else { target |= (nack_busy_id << 24); + busy_mask |= (0x1UL << + (nack_busy_id * 2)); + } __asm__ __volatile__( "stxa %%g0, [%0] %1\n\t" "membar #Sync\n\t" @@ -531,15 +537,16 @@ retry: /* Now, poll for completion. */ { - u64 dispatch_stat; + u64 dispatch_stat, nack_mask; long stuck; stuck = 100000 * nack_busy_id; + nack_mask = busy_mask << 1; do { __asm__ __volatile__("ldxa [%%g0] %1, %0" : "=r" (dispatch_stat) : "i" (ASI_INTR_DISPATCH_STAT)); - if (dispatch_stat == 0UL) { + if (!(dispatch_stat & (busy_mask | nack_mask))) { __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate)); if (unlikely(need_more)) { @@ -556,12 +563,12 @@ retry: } if (!--stuck) break; - } while (dispatch_stat & 0x5555555555555555UL); + } while (dispatch_stat & busy_mask); __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate)); - if ((dispatch_stat & ~(0x5555555555555555UL)) == 0) { + if (dispatch_stat & busy_mask) { /* Busy bits will not clear, continue instead * of freezing up on this cpu. */ diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index e18ccf85224..fbeb55d71e7 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1133,14 +1133,9 @@ static void __init mark_kpte_bitmap(unsigned long start, unsigned long end) } } -static void __init kernel_physical_mapping_init(void) +static void __init init_kpte_bitmap(void) { unsigned long i; -#ifdef CONFIG_DEBUG_PAGEALLOC - unsigned long mem_alloced = 0UL; -#endif - - read_obp_memory("reg", &pall[0], &pall_ents); for (i = 0; i < pall_ents; i++) { unsigned long phys_start, phys_end; @@ -1149,14 +1144,24 @@ static void __init kernel_physical_mapping_init(void) phys_end = phys_start + pall[i].reg_size; mark_kpte_bitmap(phys_start, phys_end); + } +} +static void __init kernel_physical_mapping_init(void) +{ #ifdef CONFIG_DEBUG_PAGEALLOC + unsigned long i, mem_alloced = 0UL; + + for (i = 0; i < pall_ents; i++) { + unsigned long phys_start, phys_end; + + phys_start = pall[i].phys_addr; + phys_end = phys_start + pall[i].reg_size; + mem_alloced += kernel_map_range(phys_start, phys_end, PAGE_KERNEL); -#endif } -#ifdef CONFIG_DEBUG_PAGEALLOC printk("Allocated %ld bytes for kernel page tables.\n", mem_alloced); @@ -1398,6 +1403,10 @@ void __init paging_init(void) inherit_prom_mappings(); + read_obp_memory("reg", &pall[0], &pall_ents); + + init_kpte_bitmap(); + /* Ok, we can use our TLB miss and window trap handlers safely. */ setup_tba(); @@ -1904,7 +1913,9 @@ void __flush_tlb_all(void) "wrpr %0, %1, %%pstate" : "=r" (pstate) : "i" (PSTATE_IE)); - if (tlb_type == spitfire) { + if (tlb_type == hypervisor) { + sun4v_mmu_demap_all(); + } else if (tlb_type == spitfire) { for (i = 0; i < 64; i++) { /* Spitfire Errata #32 workaround */ /* NOTE: Always runs on spitfire, so no diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 73681f14f9f..3c6c44ca1ff 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -98,10 +98,10 @@ static int uml_net_rx(struct net_device *dev) if (pkt_len > 0) { skb_trim(skb, pkt_len); skb->protocol = (*lp->protocol)(skb); - netif_rx(skb); lp->stats.rx_bytes += skb->len; lp->stats.rx_packets++; + netif_rx(skb); return pkt_len; } diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 90d7f2e8ead..29185cad9ff 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -201,7 +201,7 @@ static int change_tramp(char **argv, char *output, int output_len) close(fds[1]); if (pid > 0) - CATCH_EINTR(err = waitpid(pid, NULL, 0)); + helper_wait(pid, 0, "change_tramp"); return pid; } diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index 5f06204d687..b8711e50da8 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -77,7 +77,7 @@ static int slip_tramp(char **argv, int fd) { struct slip_pre_exec_data pe_data; char *output; - int status, pid, fds[2], err, output_len; + int pid, fds[2], err, output_len; err = os_pipe(fds, 1, 0); if (err < 0) { @@ -109,15 +109,7 @@ static int slip_tramp(char **argv, int fd) read_output(fds[0], output, output_len); printk("%s", output); - CATCH_EINTR(err = waitpid(pid, &status, 0)); - if (err < 0) - err = errno; - else if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) { - printk(UM_KERN_ERR "'%s' didn't exit with status 0\n", argv[0]); - err = -EINVAL; - } - else err = 0; - + err = helper_wait(pid, 0, argv[0]); close(fds[0]); out_free: diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index 1865089ff41..89c1be225fd 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -79,7 +79,7 @@ out: static void slirp_close(int fd, void *data) { struct slirp_data *pri = data; - int status,err; + int err; close(fd); close(pri->slave); @@ -98,18 +98,9 @@ static void slirp_close(int fd, void *data) "(%d)\n", pri->pid, errno); } #endif - - CATCH_EINTR(err = waitpid(pri->pid, &status, WNOHANG)); - if (err < 0) { - printk(UM_KERN_ERR "slirp_close: waitpid returned %d\n", errno); - return; - } - - if (err == 0) { - printk(UM_KERN_ERR "slirp_close: process %d has not exited\n", - pri->pid); + err = helper_wait(pri->pid, 1, "slirp_close"); + if (err < 0) return; - } pri->pid = -1; } diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c index 41d254bd38d..48fc7452bc1 100644 --- a/arch/um/drivers/ubd_user.c +++ b/arch/um/drivers/ubd_user.c @@ -49,8 +49,7 @@ int start_io_thread(unsigned long sp, int *fd_out) goto out_close; } - pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD, - NULL); + pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM, NULL); if(pid < 0){ err = -errno; printk("start_io_thread - clone failed : errno = %d\n", errno); diff --git a/arch/um/include/os.h b/arch/um/include/os.h index fbf0a87c6ea..6f0d1c741bc 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -214,7 +214,7 @@ extern int execvp_noalloc(char *buf, const char *file, char *const argv[]); extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv); extern int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, unsigned long *stack_out); -extern int helper_wait(int pid); +extern int helper_wait(int pid, int nohang, char *pname); /* tls.c */ diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index 4158118c4a5..93dc0c80eba 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -218,7 +218,7 @@ static int init_aio_24(void) goto out_close_pipe; err = run_helper_thread(not_aio_thread, NULL, - CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack); + CLONE_FILES | CLONE_VM, &aio_stack); if (err < 0) goto out_close_pipe; @@ -254,7 +254,7 @@ static int init_aio_26(void) } err = run_helper_thread(aio_thread, NULL, - CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack); + CLONE_FILES | CLONE_VM, &aio_stack); if (err < 0) return err; diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c index 4ff55360344..07ca0cb472a 100644 --- a/arch/um/os-Linux/drivers/ethertap_user.c +++ b/arch/um/os-Linux/drivers/ethertap_user.c @@ -94,7 +94,7 @@ static int etap_tramp(char *dev, char *gate, int control_me, int control_remote, int data_me, int data_remote) { struct etap_pre_exec_data pe_data; - int pid, status, err, n; + int pid, err, n; char version_buf[sizeof("nnnnn\0")]; char data_fd_buf[sizeof("nnnnnn\0")]; char gate_buf[sizeof("nnn.nnn.nnn.nnn\0")]; @@ -131,13 +131,7 @@ static int etap_tramp(char *dev, char *gate, int control_me, } if (c != 1) { printk(UM_KERN_ERR "etap_tramp : uml_net failed\n"); - err = -EINVAL; - CATCH_EINTR(n = waitpid(pid, &status, 0)); - if (n < 0) - err = -errno; - else if (!WIFEXITED(status) || (WEXITSTATUS(status) != 1)) - printk(UM_KERN_ERR "uml_net didn't exit with " - "status 1\n"); + err = helper_wait(pid, 0, "uml_net"); } return err; } diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c index 6c55d3c8ead..1037a3b6386 100644 --- a/arch/um/os-Linux/drivers/tuntap_user.c +++ b/arch/um/os-Linux/drivers/tuntap_user.c @@ -107,7 +107,7 @@ static int tuntap_open_tramp(char *gate, int *fd_out, int me, int remote, "errno = %d\n", errno); return err; } - CATCH_EINTR(waitpid(pid, NULL, 0)); + helper_wait(pid, 0, "tuntap_open_tramp"); cmsg = CMSG_FIRSTHDR(&msg); if (cmsg == NULL) { diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c index 7a72dbb61b0..fba3f0fefee 100644 --- a/arch/um/os-Linux/helper.c +++ b/arch/um/os-Linux/helper.c @@ -76,7 +76,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv) data.fd = fds[1]; data.buf = __cant_sleep() ? kmalloc(PATH_MAX, UM_GFP_ATOMIC) : kmalloc(PATH_MAX, UM_GFP_KERNEL); - pid = clone(helper_child, (void *) sp, CLONE_VM | SIGCHLD, &data); + pid = clone(helper_child, (void *) sp, CLONE_VM, &data); if (pid < 0) { ret = -errno; printk("run_helper : clone failed, errno = %d\n", errno); @@ -101,7 +101,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv) ret = n; kill(pid, SIGKILL); } - CATCH_EINTR(waitpid(pid, NULL, 0)); + CATCH_EINTR(waitpid(pid, NULL, __WCLONE)); } out_free2: @@ -126,7 +126,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, return -ENOMEM; sp = stack + UM_KERN_PAGE_SIZE - sizeof(void *); - pid = clone(proc, (void *) sp, flags | SIGCHLD, arg); + pid = clone(proc, (void *) sp, flags, arg); if (pid < 0) { err = -errno; printk("run_helper_thread : clone failed, errno = %d\n", @@ -134,7 +134,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, return err; } if (stack_out == NULL) { - CATCH_EINTR(pid = waitpid(pid, &status, 0)); + CATCH_EINTR(pid = waitpid(pid, &status, __WCLONE)); if (pid < 0) { err = -errno; printk("run_helper_thread - wait failed, errno = %d\n", @@ -150,14 +150,30 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, return pid; } -int helper_wait(int pid) +int helper_wait(int pid, int nohang, char *pname) { - int ret; + int ret, status; + int wflags = __WCLONE; - CATCH_EINTR(ret = waitpid(pid, NULL, WNOHANG)); + if (nohang) + wflags |= WNOHANG; + + if (!pname) + pname = "helper_wait"; + + CATCH_EINTR(ret = waitpid(pid, &status, wflags)); if (ret < 0) { - ret = -errno; - printk("helper_wait : waitpid failed, errno = %d\n", errno); - } - return ret; + printk(UM_KERN_ERR "%s : waitpid process %d failed, " + "errno = %d\n", pname, pid, errno); + return -errno; + } else if (nohang && ret == 0) { + printk(UM_KERN_ERR "%s : process %d has not exited\n", + pname, pid); + return -ECHILD; + } else if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) { + printk(UM_KERN_ERR "%s : process %d didn't exit with " + "status 0\n", pname, pid); + return -ECHILD; + } else + return 0; } diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index 37781db4cec..bda5c3150d6 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -101,7 +101,7 @@ void os_kill_process(int pid, int reap_child) { kill(pid, SIGKILL); if (reap_child) - CATCH_EINTR(waitpid(pid, NULL, 0)); + CATCH_EINTR(waitpid(pid, NULL, __WALL)); } /* This is here uniquely to have access to the userspace errno, i.e. the one @@ -130,7 +130,7 @@ void os_kill_ptraced_process(int pid, int reap_child) ptrace(PTRACE_KILL, pid); ptrace(PTRACE_CONT, pid); if (reap_child) - CATCH_EINTR(waitpid(pid, NULL, 0)); + CATCH_EINTR(waitpid(pid, NULL, __WALL)); } /* Don't use the glibc version, which caches the result in TLS. It misses some diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index d77c81d7068..e8b7a97e83d 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -64,7 +64,7 @@ void wait_stub_done(int pid) int n, status, err; while (1) { - CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); + CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL)); if ((n < 0) || !WIFSTOPPED(status)) goto bad_wait; @@ -153,7 +153,7 @@ static void handle_trap(int pid, struct uml_pt_regs *regs, panic("handle_trap - continuing to end of syscall " "failed, errno = %d\n", errno); - CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED)); + CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL)); if ((err < 0) || !WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP + 0x80)) { err = ptrace_dump_regs(pid); @@ -255,16 +255,18 @@ int start_userspace(unsigned long stub_stack) panic("start_userspace : mmap failed, errno = %d", errno); sp = (unsigned long) stack + UM_KERN_PAGE_SIZE - sizeof(void *); - flags = CLONE_FILES | SIGCHLD; + flags = CLONE_FILES; if (proc_mm) flags |= CLONE_VM; + else + flags |= SIGCHLD; pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack); if (pid < 0) panic("start_userspace : clone failed, errno = %d", errno); do { - CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); + CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL)); if (n < 0) panic("start_userspace : wait failed, errno = %d", errno); @@ -314,7 +316,7 @@ void userspace(struct uml_pt_regs *regs) "pid=%d, ptrace operation = %d, errno = %d\n", pid, op, errno); - CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED)); + CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL)); if (err < 0) panic("userspace - waitpid failed, errno = %d\n", errno); diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c index ef095436a78..3e058ce9ffb 100644 --- a/arch/um/os-Linux/util.c +++ b/arch/um/os-Linux/util.c @@ -141,7 +141,7 @@ void os_dump_core(void) * nothing reasonable to do if that fails. */ - while ((pid = waitpid(-1, NULL, WNOHANG)) > 0) + while ((pid = waitpid(-1, NULL, WNOHANG | __WALL)) > 0) os_kill_ptraced_process(pid, 0); abort(); diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 96986b46bc8..edb5108e5d0 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -849,7 +849,7 @@ void __init init_bsp_APIC(void) /** * setup_local_APIC - setup the local APIC */ -void __devinit setup_local_APIC(void) +void __cpuinit setup_local_APIC(void) { unsigned long oldvalue, value, maxlvt, integrated; int i, j; diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 606fe4d55a9..9f530ff43c2 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -49,6 +49,7 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x3c, LVL_2, 256 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x3d, LVL_2, 384 }, /* 6-way set assoc, sectored cache, 64 byte line size */ { 0x3e, LVL_2, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */ + { 0x3f, LVL_2, 256 }, /* 2-way set assoc, 64 byte line size */ { 0x41, LVL_2, 128 }, /* 4-way set assoc, 32 byte line size */ { 0x42, LVL_2, 256 }, /* 4-way set assoc, 32 byte line size */ { 0x43, LVL_2, 512 }, /* 4-way set assoc, 32 byte line size */ diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 6cf27319a91..c3a565bba10 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -1882,13 +1882,16 @@ __setup("no_timer_check", notimercheck); static int __init timer_irq_works(void) { unsigned long t1 = jiffies; + unsigned long flags; if (no_timer_check) return 1; + local_save_flags(flags); local_irq_enable(); /* Let ten ticks pass... */ mdelay((10 * 1000) / HZ); + local_irq_restore(flags); /* * Expect a few ticks at least, to be sure some possible @@ -2167,6 +2170,9 @@ static inline void __init check_timer(void) int apic1, pin1, apic2, pin2; int vector; unsigned int ver; + unsigned long flags; + + local_irq_save(flags); ver = apic_read(APIC_LVR); ver = GET_APIC_VERSION(ver); @@ -2219,7 +2225,7 @@ static inline void __init check_timer(void) } if (disable_timer_pin_1 > 0) clear_IO_APIC_pin(0, pin1); - return; + goto out; } clear_IO_APIC_pin(apic1, pin1); printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " @@ -2242,7 +2248,7 @@ static inline void __init check_timer(void) if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); } - return; + goto out; } /* * Cleanup, just in case ... @@ -2266,7 +2272,7 @@ static inline void __init check_timer(void) if (timer_irq_works()) { printk(" works.\n"); - return; + goto out; } apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); printk(" failed.\n"); @@ -2282,11 +2288,13 @@ static inline void __init check_timer(void) if (timer_irq_works()) { printk(" works.\n"); - return; + goto out; } printk(" failed :(.\n"); panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " "report. Then try booting with the 'noapic' option"); +out: + local_irq_restore(flags); } /* diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 435a8c9b55f..cbac1670c7c 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1281,10 +1281,13 @@ void disable_IO_APIC(void) static int __init timer_irq_works(void) { unsigned long t1 = jiffies; + unsigned long flags; + local_save_flags(flags); local_irq_enable(); /* Let ten ticks pass... */ mdelay((10 * 1000) / HZ); + local_irq_restore(flags); /* * Expect a few ticks at least, to be sure some possible @@ -1655,6 +1658,9 @@ static inline void check_timer(void) { struct irq_cfg *cfg = irq_cfg + 0; int apic1, pin1, apic2, pin2; + unsigned long flags; + + local_irq_save(flags); /* * get/set the timer IRQ vector: @@ -1696,7 +1702,7 @@ static inline void check_timer(void) } if (disable_timer_pin_1 > 0) clear_IO_APIC_pin(0, pin1); - return; + goto out; } clear_IO_APIC_pin(apic1, pin1); apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not " @@ -1718,7 +1724,7 @@ static inline void check_timer(void) if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); } - return; + goto out; } /* * Cleanup, just in case ... @@ -1741,7 +1747,7 @@ static inline void check_timer(void) if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); - return; + goto out; } apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); apic_printk(APIC_VERBOSE," failed.\n"); @@ -1756,10 +1762,12 @@ static inline void check_timer(void) if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); - return; + goto out; } apic_printk(APIC_VERBOSE," failed :(.\n"); panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n"); +out: + local_irq_restore(flags); } static int __init notimercheck(char *s) diff --git a/arch/x86/kernel/kprobes_32.c b/arch/x86/kernel/kprobes_32.c index d87a523070d..3a020f79f82 100644 --- a/arch/x86/kernel/kprobes_32.c +++ b/arch/x86/kernel/kprobes_32.c @@ -727,9 +727,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { if (®s->esp != kcb->jprobe_saved_esp) { - struct pt_regs *saved_regs = - container_of(kcb->jprobe_saved_esp, - struct pt_regs, esp); + struct pt_regs *saved_regs = &kcb->jprobe_saved_regs; printk("current esp %p does not match saved esp %p\n", ®s->esp, kcb->jprobe_saved_esp); printk("Saved registers for jprobe %p\n", jp); diff --git a/arch/x86/kernel/kprobes_64.c b/arch/x86/kernel/kprobes_64.c index 0c467644589..5df19a9f923 100644 --- a/arch/x86/kernel/kprobes_64.c +++ b/arch/x86/kernel/kprobes_64.c @@ -485,7 +485,6 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)regs->rsp; - unsigned long next_rip = 0; unsigned long copy_rip = (unsigned long)p->ainsn.insn; unsigned long orig_rip = (unsigned long)p->addr; kprobe_opcode_t *insn = p->ainsn.insn; @@ -494,46 +493,42 @@ static void __kprobes resume_execution(struct kprobe *p, if (*insn >= 0x40 && *insn <= 0x4f) insn++; + regs->eflags &= ~TF_MASK; switch (*insn) { - case 0x9c: /* pushfl */ + case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); *tos |= kcb->kprobe_old_rflags; break; - case 0xc3: /* ret/lret */ - case 0xcb: - case 0xc2: + case 0xc2: /* iret/ret/lret */ + case 0xc3: case 0xca: - regs->eflags &= ~TF_MASK; - /* rip is already adjusted, no more changes required*/ - return; - case 0xe8: /* call relative - Fix return addr */ + case 0xcb: + case 0xcf: + case 0xea: /* jmp absolute -- ip is correct */ + /* ip is already adjusted, no more changes required */ + goto no_change; + case 0xe8: /* call relative - Fix return addr */ *tos = orig_rip + (*tos - copy_rip); break; case 0xff: if ((insn[1] & 0x30) == 0x10) { /* call absolute, indirect */ - /* Fix return addr; rip is correct. */ - next_rip = regs->rip; + /* Fix return addr; ip is correct. */ *tos = orig_rip + (*tos - copy_rip); + goto no_change; } else if (((insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */ ((insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */ - /* rip is correct. */ - next_rip = regs->rip; + /* ip is correct. */ + goto no_change; } - break; - case 0xea: /* jmp absolute -- rip is correct */ - next_rip = regs->rip; - break; default: break; } - regs->eflags &= ~TF_MASK; - if (next_rip) { - regs->rip = next_rip; - } else { - regs->rip = orig_rip + (regs->rip - copy_rip); - } + regs->rip = orig_rip + (regs->rip - copy_rip); +no_change: + + return; } int __kprobes post_kprobe_handler(struct pt_regs *regs) @@ -716,10 +711,8 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) struct jprobe *jp = container_of(p, struct jprobe, kp); if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if ((long *)regs->rsp != kcb->jprobe_saved_rsp) { - struct pt_regs *saved_regs = - container_of(kcb->jprobe_saved_rsp, - struct pt_regs, rsp); + if ((unsigned long *)regs->rsp != kcb->jprobe_saved_rsp) { + struct pt_regs *saved_regs = &kcb->jprobe_saved_regs; printk("current rsp %p does not match saved rsp %p\n", (long *)regs->rsp, kcb->jprobe_saved_rsp); printk("Saved registers for jprobe %p\n", jp); diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 7b899584d29..9663c2a7483 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -261,7 +261,7 @@ static void mwait_idle(void) mwait_idle_with_hints(0, 0); } -void __devinit select_idle_routine(const struct cpuinfo_x86 *c) +void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) { if (cpu_has(c, X86_FEATURE_MWAIT)) { printk("monitor/mwait feature present.\n"); diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index e1e18c34c82..9c24b45b513 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -67,7 +67,7 @@ address, and must not be in the .bss segment! */ unsigned long init_pg_tables_end __initdata = ~0UL; -int disable_pse __devinitdata = 0; +int disable_pse __cpuinitdata = 0; /* * Machine setup.. diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot_32.c index ef0f34ede1a..4ea80cbe52e 100644 --- a/arch/x86/kernel/smpboot_32.c +++ b/arch/x86/kernel/smpboot_32.c @@ -60,7 +60,7 @@ #include <asm/mtrr.h> /* Set if we find a B stepping CPU */ -static int __devinitdata smp_b_stepping; +static int __cpuinitdata smp_b_stepping; /* Number of siblings per CPU package */ int smp_num_siblings = 1; @@ -745,8 +745,8 @@ static inline int alloc_cpu_id(void) } #ifdef CONFIG_HOTPLUG_CPU -static struct task_struct * __devinitdata cpu_idle_tasks[NR_CPUS]; -static inline struct task_struct * alloc_idle_task(int cpu) +static struct task_struct * __cpuinitdata cpu_idle_tasks[NR_CPUS]; +static inline struct task_struct * __cpuinit alloc_idle_task(int cpu) { struct task_struct *idle; diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c index 500670c93d8..594889521da 100644 --- a/arch/x86/kernel/smpboot_64.c +++ b/arch/x86/kernel/smpboot_64.c @@ -141,8 +141,8 @@ static void __cpuinit smp_store_cpu_info(int id) struct cpuinfo_x86 *c = &cpu_data(id); *c = boot_cpu_data; - c->cpu_index = id; identify_cpu(c); + c->cpu_index = id; print_cpu_info(c); } diff --git a/arch/x86/kernel/suspend_64.c b/arch/x86/kernel/suspend_64.c index db284ef44d5..2e5efaaf880 100644 --- a/arch/x86/kernel/suspend_64.c +++ b/arch/x86/kernel/suspend_64.c @@ -192,42 +192,25 @@ static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long en return 0; } -static int res_kernel_text_pud_init(pud_t *pud, unsigned long start) -{ - pmd_t *pmd; - unsigned long paddr; - - pmd = (pmd_t *)get_safe_page(GFP_ATOMIC); - if (!pmd) - return -ENOMEM; - set_pud(pud + pud_index(start), __pud(__pa(pmd) | _KERNPG_TABLE)); - for (paddr = 0; paddr < KERNEL_TEXT_SIZE; pmd++, paddr += PMD_SIZE) { - unsigned long pe; - - pe = __PAGE_KERNEL_LARGE_EXEC | _PAGE_GLOBAL | paddr; - pe &= __supported_pte_mask; - set_pmd(pmd, __pmd(pe)); - } - - return 0; -} - static int set_up_temporary_mappings(void) { unsigned long start, end, next; - pud_t *pud; int error; temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC); if (!temp_level4_pgt) return -ENOMEM; + /* It is safe to reuse the original kernel mapping */ + set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map), + init_level4_pgt[pgd_index(__START_KERNEL_map)]); + /* Set up the direct mapping from scratch */ start = (unsigned long)pfn_to_kaddr(0); end = (unsigned long)pfn_to_kaddr(end_pfn); for (; start < end; start = next) { - pud = (pud_t *)get_safe_page(GFP_ATOMIC); + pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC); if (!pud) return -ENOMEM; next = start + PGDIR_SIZE; @@ -238,17 +221,7 @@ static int set_up_temporary_mappings(void) set_pgd(temp_level4_pgt + pgd_index(start), mk_kernel_pgd(__pa(pud))); } - - /* Set up the kernel text mapping from scratch */ - pud = (pud_t *)get_safe_page(GFP_ATOMIC); - if (!pud) - return -ENOMEM; - error = res_kernel_text_pud_init(pud, __START_KERNEL_map); - if (!error) - set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map), - __pgd(__pa(pud) | _PAGE_TABLE)); - - return error; + return 0; } int swsusp_arch_resume(void) diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index ef601026259..c88bbffcaa0 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -373,14 +373,13 @@ void die(const char * str, struct pt_regs * regs, long err) if (die.lock_owner != raw_smp_processor_id()) { console_verbose(); + raw_local_irq_save(flags); __raw_spin_lock(&die.lock); - raw_local_save_flags(flags); die.lock_owner = smp_processor_id(); die.lock_owner_depth = 0; bust_spinlocks(1); - } - else - raw_local_save_flags(flags); + } else + raw_local_irq_save(flags); if (++die.lock_owner_depth < 3) { unsigned long esp; diff --git a/arch/x86/oprofile/op_model_athlon.c b/arch/x86/oprofile/op_model_athlon.c index 3057a19e464..c3ee43333f2 100644 --- a/arch/x86/oprofile/op_model_athlon.c +++ b/arch/x86/oprofile/op_model_athlon.c @@ -1,6 +1,6 @@ /** * @file op_model_athlon.h - * athlon / K7 model-specific MSR operations + * athlon / K7 / K8 / Family 10h model-specific MSR operations * * @remark Copyright 2002 OProfile authors * @remark Read the file COPYING @@ -31,12 +31,16 @@ #define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0) #define CTRL_SET_ACTIVE(n) (n |= (1<<22)) #define CTRL_SET_INACTIVE(n) (n &= ~(1<<22)) -#define CTRL_CLEAR(x) (x &= (1<<21)) +#define CTRL_CLEAR_LO(x) (x &= (1<<21)) +#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0) #define CTRL_SET_ENABLE(val) (val |= 1<<20) #define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16)) #define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17)) #define CTRL_SET_UM(val, m) (val |= (m << 8)) -#define CTRL_SET_EVENT(val, e) (val |= e) +#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff)) +#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf)) +#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9)) +#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8)) static unsigned long reset_value[NUM_COUNTERS]; @@ -70,7 +74,8 @@ static void athlon_setup_ctrs(struct op_msrs const * const msrs) if (unlikely(!CTRL_IS_RESERVED(msrs,i))) continue; CTRL_READ(low, high, msrs, i); - CTRL_CLEAR(low); + CTRL_CLEAR_LO(low); + CTRL_CLEAR_HI(high); CTRL_WRITE(low, high, msrs, i); } @@ -89,12 +94,17 @@ static void athlon_setup_ctrs(struct op_msrs const * const msrs) CTR_WRITE(counter_config[i].count, msrs, i); CTRL_READ(low, high, msrs, i); - CTRL_CLEAR(low); + CTRL_CLEAR_LO(low); + CTRL_CLEAR_HI(high); CTRL_SET_ENABLE(low); CTRL_SET_USR(low, counter_config[i].user); CTRL_SET_KERN(low, counter_config[i].kernel); CTRL_SET_UM(low, counter_config[i].unit_mask); - CTRL_SET_EVENT(low, counter_config[i].event); + CTRL_SET_EVENT_LOW(low, counter_config[i].event); + CTRL_SET_EVENT_HIGH(high, counter_config[i].event); + CTRL_SET_HOST_ONLY(high, 0); + CTRL_SET_GUEST_ONLY(high, 0); + CTRL_WRITE(low, high, msrs, i); } else { reset_value[i] = 0; diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 94c39aaf695..b6af3ea43c7 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1131,7 +1131,7 @@ asmlinkage void __init xen_start_kernel(void) if (!xen_start_info) return; - BUG_ON(memcmp(xen_start_info->magic, "xen-3.0", 7) != 0); + BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0); /* Install Xen paravirt ops */ pv_info = xen_info; diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c index b61fb36674e..f21b9b0899a 100644 --- a/arch/xtensa/platform-iss/network.c +++ b/arch/xtensa/platform-iss/network.c @@ -393,11 +393,11 @@ static int iss_net_rx(struct net_device *dev) if (pkt_len > 0) { skb_trim(skb, pkt_len); skb->protocol = lp->tp.protocol(skb); - // netif_rx(skb); - netif_rx_ni(skb); lp->stats.rx_bytes += skb->len; lp->stats.rx_packets++; + // netif_rx(skb); + netif_rx_ni(skb); return pkt_len; } kfree_skb(skb); diff --git a/block/as-iosched.c b/block/as-iosched.c index dc715a562e1..cb5e53b05c7 100644 --- a/block/as-iosched.c +++ b/block/as-iosched.c @@ -880,7 +880,7 @@ static void as_remove_queued_request(struct request_queue *q, } /* - * as_fifo_expired returns 0 if there are no expired reads on the fifo, + * as_fifo_expired returns 0 if there are no expired requests on the fifo, * 1 otherwise. It is ratelimited so that we only perform the check once per * `fifo_expire' interval. Otherwise a large number of expired requests * would create a hopeless seekstorm. @@ -1097,7 +1097,8 @@ dispatch_writes: ad->batch_data_dir = REQ_ASYNC; ad->current_write_count = ad->write_batch_count; ad->write_batch_idled = 0; - rq = ad->next_rq[ad->batch_data_dir]; + rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next); + ad->last_check_fifo[REQ_ASYNC] = jiffies; goto dispatch_request; } @@ -1159,7 +1160,7 @@ static void as_add_request(struct request_queue *q, struct request *rq) as_add_rq_rb(ad, rq); /* - * set expire time (only used for reads) and add to fifo list + * set expire time and add to fifo list */ rq_set_fifo_time(rq, jiffies + ad->fifo_expire[data_dir]); list_add_tail(&rq->queuelist, &ad->fifo_list[data_dir]); @@ -1463,7 +1464,9 @@ static struct elevator_type iosched_as = { static int __init as_init(void) { - return elv_register(&iosched_as); + elv_register(&iosched_as); + + return 0; } static void __exit as_exit(void) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 0b4a4790557..13553e015d7 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2279,8 +2279,6 @@ static struct elevator_type iosched_cfq = { static int __init cfq_init(void) { - int ret; - /* * could be 0 on HZ < 1000 setups */ @@ -2292,11 +2290,9 @@ static int __init cfq_init(void) if (cfq_slab_setup()) return -ENOMEM; - ret = elv_register(&iosched_cfq); - if (ret) - cfq_slab_kill(); + elv_register(&iosched_cfq); - return ret; + return 0; } static void __exit cfq_exit(void) diff --git a/block/deadline-iosched.c b/block/deadline-iosched.c index a054eef8dff..342448c3d2d 100644 --- a/block/deadline-iosched.c +++ b/block/deadline-iosched.c @@ -467,7 +467,9 @@ static struct elevator_type iosched_deadline = { static int __init deadline_init(void) { - return elv_register(&iosched_deadline); + elv_register(&iosched_deadline); + + return 0; } static void __exit deadline_exit(void) diff --git a/block/elevator.c b/block/elevator.c index 446aea2a3cf..e452deb8039 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -960,7 +960,7 @@ void elv_unregister_queue(struct request_queue *q) __elv_unregister_queue(q->elevator); } -int elv_register(struct elevator_type *e) +void elv_register(struct elevator_type *e) { char *def = ""; @@ -975,7 +975,6 @@ int elv_register(struct elevator_type *e) def = " (default)"; printk(KERN_INFO "io scheduler %s registered%s\n", e->elevator_name, def); - return 0; } EXPORT_SYMBOL_GPL(elv_register); diff --git a/block/noop-iosched.c b/block/noop-iosched.c index 7563d8aa394..c23e0296965 100644 --- a/block/noop-iosched.c +++ b/block/noop-iosched.c @@ -101,7 +101,9 @@ static struct elevator_type elevator_noop = { static int __init noop_init(void) { - return elv_register(&elevator_noop); + elv_register(&elevator_noop); + + return 0; } static void __exit noop_exit(void) diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 91c73224f4c..9675b34638d 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -230,7 +230,7 @@ static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq, rq->cmd_len = hdr->cmd_len; rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->timeout = (hdr->timeout * HZ) / 1000; + rq->timeout = msecs_to_jiffies(hdr->timeout); if (!rq->timeout) rq->timeout = q->sg_timeout; if (!rq->timeout) @@ -366,7 +366,7 @@ static int sg_io(struct file *file, struct request_queue *q, */ blk_execute_rq(q, bd_disk, rq, 0); - hdr->duration = ((jiffies - start_time) * 1000) / HZ; + hdr->duration = jiffies_to_msecs(jiffies - start_time); return blk_complete_sghdr_rq(rq, hdr, bio); out: diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 7d6be23eff8..8f7505d304b 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -125,7 +125,7 @@ static int acpi_battery_technology(struct acpi_battery *battery) return POWER_SUPPLY_TECHNOLOGY_NiMH; if (!strcasecmp("LION", battery->type)) return POWER_SUPPLY_TECHNOLOGY_LION; - if (!strcasecmp("LI-ION", battery->type)) + if (!strncasecmp("LI-ION", battery->type, 6)) return POWER_SUPPLY_TECHNOLOGY_LION; if (!strcasecmp("LiP", battery->type)) return POWER_SUPPLY_TECHNOLOGY_LIPO; diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index ab04d848b19..0822d9fc1cb 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -38,9 +38,9 @@ ACPI_MODULE_NAME("numa"); static nodemask_t nodes_found_map = NODE_MASK_NONE; /* maps to convert between proximity domain and logical node ID */ -static int __cpuinitdata pxm_to_node_map[MAX_PXM_DOMAINS] +static int pxm_to_node_map[MAX_PXM_DOMAINS] = { [0 ... MAX_PXM_DOMAINS - 1] = NID_INVAL }; -static int __cpuinitdata node_to_pxm_map[MAX_NUMNODES] +static int node_to_pxm_map[MAX_NUMNODES] = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; int pxm_to_node(int pxm) diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index 028969370bb..388300de005 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -294,9 +294,6 @@ int acpi_pci_unbind(struct acpi_device *device) acpi_get_data(device->handle, acpi_pci_data_handler, (void **)&data); if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Unable to get data from device %s", - acpi_device_bid(device))); result = -ENODEV; goto end; } diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index 6045cdbe176..22cb95b349e 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -54,12 +54,6 @@ #define ACPI_BATTERY_DIR_NAME "BAT%i" #define ACPI_AC_DIR_NAME "AC0" -enum acpi_sbs_device_addr { - ACPI_SBS_CHARGER = 0x9, - ACPI_SBS_MANAGER = 0xa, - ACPI_SBS_BATTERY = 0xb, -}; - #define ACPI_SBS_NOTIFY_STATUS 0x80 #define ACPI_SBS_NOTIFY_INFO 0x81 @@ -539,7 +533,7 @@ static struct proc_dir_entry *acpi_battery_dir = NULL; static inline char *acpi_battery_units(struct acpi_battery *battery) { - return acpi_battery_mode(battery) ? " mWh" : " mAh"; + return acpi_battery_mode(battery) ? " mW" : " mA"; } @@ -556,10 +550,10 @@ static int acpi_battery_read_info(struct seq_file *seq, void *offset) if (!battery->present) goto end; - seq_printf(seq, "design capacity: %i%s\n", + seq_printf(seq, "design capacity: %i%sh\n", battery->design_capacity * acpi_battery_scale(battery), acpi_battery_units(battery)); - seq_printf(seq, "last full capacity: %i%s\n", + seq_printf(seq, "last full capacity: %i%sh\n", battery->full_charge_capacity * acpi_battery_scale(battery), acpi_battery_units(battery)); seq_printf(seq, "battery technology: rechargeable\n"); @@ -590,7 +584,7 @@ static int acpi_battery_read_state(struct seq_file *seq, void *offset) { struct acpi_battery *battery = seq->private; struct acpi_sbs *sbs = battery->sbs; - int result = 0; + int rate; mutex_lock(&sbs->lock); seq_printf(seq, "present: %s\n", @@ -604,9 +598,12 @@ static int acpi_battery_read_state(struct seq_file *seq, void *offset) seq_printf(seq, "charging state: %s\n", (battery->current_now < 0) ? "discharging" : ((battery->current_now > 0) ? "charging" : "charged")); - seq_printf(seq, "present rate: %d mA\n", - abs(battery->current_now) * acpi_battery_ipscale(battery)); - seq_printf(seq, "remaining capacity: %i%s\n", + rate = abs(battery->current_now) * acpi_battery_ipscale(battery); + rate *= (acpi_battery_mode(battery))?(battery->voltage_now * + acpi_battery_vscale(battery)/1000):1; + seq_printf(seq, "present rate: %d%s\n", rate, + acpi_battery_units(battery)); + seq_printf(seq, "remaining capacity: %i%sh\n", battery->capacity_now * acpi_battery_scale(battery), acpi_battery_units(battery)); seq_printf(seq, "present voltage: %i mV\n", @@ -614,7 +611,7 @@ static int acpi_battery_read_state(struct seq_file *seq, void *offset) end: mutex_unlock(&sbs->lock); - return result; + return 0; } static int acpi_battery_state_open_fs(struct inode *inode, struct file *file) @@ -638,7 +635,7 @@ static int acpi_battery_read_alarm(struct seq_file *seq, void *offset) acpi_battery_get_alarm(battery); seq_printf(seq, "alarm: "); if (battery->alarm_capacity) - seq_printf(seq, "%i%s\n", + seq_printf(seq, "%i%sh\n", battery->alarm_capacity * acpi_battery_scale(battery), acpi_battery_units(battery)); diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index 046d7c3ed35..fd40b6a1d63 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -202,10 +202,9 @@ int acpi_smbus_unregister_callback(struct acpi_smb_hc *hc) EXPORT_SYMBOL_GPL(acpi_smbus_unregister_callback); -static void acpi_smbus_callback(void *context) +static inline void acpi_smbus_callback(void *context) { struct acpi_smb_hc *hc = context; - if (hc->callback) hc->callback(hc->context); } @@ -214,6 +213,7 @@ static int smbus_alarm(void *context) { struct acpi_smb_hc *hc = context; union acpi_smb_status status; + u8 address; if (smb_hc_read(hc, ACPI_SMB_STATUS, &status.raw)) return 0; /* Check if it is only a completion notify */ @@ -222,9 +222,18 @@ static int smbus_alarm(void *context) if (!status.fields.alarm) return 0; mutex_lock(&hc->lock); + smb_hc_read(hc, ACPI_SMB_ALARM_ADDRESS, &address); + status.fields.alarm = 0; smb_hc_write(hc, ACPI_SMB_STATUS, status.raw); - if (hc->callback) - acpi_os_execute(OSL_GPE_HANDLER, acpi_smbus_callback, hc); + /* We are only interested in events coming from known devices */ + switch (address >> 1) { + case ACPI_SBS_CHARGER: + case ACPI_SBS_MANAGER: + case ACPI_SBS_BATTERY: + acpi_os_execute(OSL_GPE_HANDLER, + acpi_smbus_callback, hc); + default:; + } mutex_unlock(&hc->lock); return 0; } diff --git a/drivers/acpi/sbshc.h b/drivers/acpi/sbshc.h index 3bda3491a97..a57b0762dd7 100644 --- a/drivers/acpi/sbshc.h +++ b/drivers/acpi/sbshc.h @@ -16,6 +16,12 @@ enum acpi_smb_protocol { static const u8 SMBUS_PEC = 0x80; +enum acpi_sbs_device_addr { + ACPI_SBS_CHARGER = 0x9, + ACPI_SBS_MANAGER = 0xa, + ACPI_SBS_BATTERY = 0xb, +}; + typedef void (*smbus_alarm_callback)(void *context); extern int acpi_smbus_read(struct acpi_smb_hc *hc, u8 protocol, u8 address, diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 44a0d9ba9bd..bd77e81e81c 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -577,7 +577,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) struct acpi_video_device_brightness *br = NULL; - memset(&device->cap, 0, 4); + memset(&device->cap, 0, sizeof(device->cap)); if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_ADR", &h_dummy1))) { device->cap._ADR = 1; @@ -697,7 +697,7 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) { acpi_handle h_dummy1; - memset(&video->cap, 0, 4); + memset(&video->cap, 0, sizeof(video->cap)); if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOS", &h_dummy1))) { video->cap._DOS = 1; } diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 545ea865ceb..7bf4befd96b 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -6,6 +6,7 @@ * Copyright (C) 2006 Randy Dunlap */ +#include <linux/module.h> #include <linux/ata.h> #include <linux/delay.h> #include <linux/device.h> @@ -25,6 +26,18 @@ #include <acpi/acmacros.h> #include <acpi/actypes.h> +enum { + ATA_ACPI_FILTER_SETXFER = 1 << 0, + ATA_ACPI_FILTER_LOCK = 1 << 1, + + ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER | + ATA_ACPI_FILTER_LOCK, +}; + +static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT; +module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644); +MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)"); + #define NO_PORT_MULT 0xffff #define SATA_ADR(root, pmp) (((root) << 16) | (pmp)) @@ -41,6 +54,12 @@ static int is_pci_dev(struct device *dev) return (dev->bus == &pci_bus_type); } +static void ata_acpi_clear_gtf(struct ata_device *dev) +{ + kfree(dev->gtf_cache); + dev->gtf_cache = NULL; +} + /** * ata_acpi_associate_sata_port - associate SATA port with ACPI objects * @ap: target SATA port @@ -94,6 +113,9 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap) dev->acpi_handle = acpi_get_child(ap->acpi_handle, i); } + + if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0) + ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; } static void ata_acpi_handle_hotplug(struct ata_port *ap, struct kobject *kobj, @@ -188,6 +210,32 @@ void ata_acpi_associate(struct ata_host *host) } /** + * ata_acpi_dissociate - dissociate ATA host from ACPI objects + * @host: target ATA host + * + * This function is called during driver detach after the whole host + * is shut down. + * + * LOCKING: + * EH context. + */ +void ata_acpi_dissociate(struct ata_host *host) +{ + int i; + + /* Restore initial _GTM values so that driver which attaches + * afterward can use them too. + */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); + + if (ap->acpi_handle && gtm) + ata_acpi_stm(ap, gtm); + } +} + +/** * ata_acpi_gtm - execute _GTM * @ap: target ATA port * @gtm: out parameter for _GTM result @@ -200,7 +248,7 @@ void ata_acpi_associate(struct ata_host *host) * RETURNS: * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure. */ -int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm) +int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm) { struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER }; union acpi_object *out_obj; @@ -259,15 +307,16 @@ EXPORT_SYMBOL_GPL(ata_acpi_gtm); * RETURNS: * 0 on success, -ENOENT if _STM doesn't exist, -errno on failure. */ -int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm) +int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm) { acpi_status status; + struct ata_acpi_gtm stm_buf = *stm; struct acpi_object_list input; union acpi_object in_params[3]; in_params[0].type = ACPI_TYPE_BUFFER; in_params[0].buffer.length = sizeof(struct ata_acpi_gtm); - in_params[0].buffer.pointer = (u8 *)stm; + in_params[0].buffer.pointer = (u8 *)&stm_buf; /* Buffers for id may need byteswapping ? */ in_params[1].type = ACPI_TYPE_BUFFER; in_params[1].buffer.length = 512; @@ -297,7 +346,6 @@ EXPORT_SYMBOL_GPL(ata_acpi_stm); * ata_dev_get_GTF - get the drive bootup default taskfile settings * @dev: target ATA device * @gtf: output parameter for buffer containing _GTF taskfile arrays - * @ptr_to_free: pointer which should be freed * * This applies to both PATA and SATA drives. * @@ -311,11 +359,10 @@ EXPORT_SYMBOL_GPL(ata_acpi_stm); * EH context. * * RETURNS: - * Number of taskfiles on success, 0 if _GTF doesn't exist or doesn't - * contain valid data. + * Number of taskfiles on success, 0 if _GTF doesn't exist. -EINVAL + * if _GTF is invalid. */ -static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, - void **ptr_to_free) +static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) { struct ata_port *ap = dev->link->ap; acpi_status status; @@ -323,6 +370,12 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, union acpi_object *out_obj; int rc = 0; + /* if _GTF is cached, use the cached value */ + if (dev->gtf_cache) { + out_obj = dev->gtf_cache; + goto done; + } + /* set up output buffer */ output.length = ACPI_ALLOCATE_BUFFER; output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ @@ -333,12 +386,14 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, /* _GTF has no input parameters */ status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output); + out_obj = dev->gtf_cache = output.pointer; if (ACPI_FAILURE(status)) { if (status != AE_NOT_FOUND) { ata_dev_printk(dev, KERN_WARNING, "_GTF evaluation failed (AE 0x%x)\n", status); + rc = -EINVAL; } goto out_free; } @@ -350,14 +405,15 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, __FUNCTION__, (unsigned long long)output.length, output.pointer); + rc = -EINVAL; goto out_free; } - out_obj = output.pointer; if (out_obj->type != ACPI_TYPE_BUFFER) { ata_dev_printk(dev, KERN_WARNING, "_GTF unexpected object type 0x%x\n", out_obj->type); + rc = -EINVAL; goto out_free; } @@ -365,21 +421,23 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, ata_dev_printk(dev, KERN_WARNING, "unexpected _GTF length (%d)\n", out_obj->buffer.length); + rc = -EINVAL; goto out_free; } - *ptr_to_free = out_obj; - *gtf = (void *)out_obj->buffer.pointer; + done: rc = out_obj->buffer.length / REGS_PER_GTF; - - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: returning " - "gtf=%p, gtf_count=%d, ptr_to_free=%p\n", - __FUNCTION__, *gtf, rc, *ptr_to_free); + if (gtf) { + *gtf = (void *)out_obj->buffer.pointer; + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, + "%s: returning gtf=%p, gtf_count=%d\n", + __FUNCTION__, *gtf, rc); + } return rc; out_free: - kfree(output.pointer); + ata_acpi_clear_gtf(dev); return rc; } @@ -393,22 +451,21 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, int ata_acpi_cbl_80wire(struct ata_port *ap) { - struct ata_acpi_gtm gtm; + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); int valid = 0; - /* No _GTM data, no information */ - if (ata_acpi_gtm(ap, >m) < 0) + if (!gtm) return 0; /* Split timing, DMA enabled */ - if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55) + if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55) valid |= 1; - if ((gtm.flags & 0x14) == 0x14 && gtm.drive[1].dma < 55) + if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55) valid |= 2; /* Shared timing, DMA enabled */ - if ((gtm.flags & 0x11) == 0x01 && gtm.drive[0].dma < 55) + if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55) valid |= 1; - if ((gtm.flags & 0x14) == 0x04 && gtm.drive[0].dma < 55) + if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55) valid |= 2; /* Drive check */ @@ -421,8 +478,62 @@ int ata_acpi_cbl_80wire(struct ata_port *ap) EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); +static void ata_acpi_gtf_to_tf(struct ata_device *dev, + const struct ata_acpi_gtf *gtf, + struct ata_taskfile *tf) +{ + ata_tf_init(dev, tf); + + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->protocol = ATA_PROT_NODATA; + tf->feature = gtf->tf[0]; /* 0x1f1 */ + tf->nsect = gtf->tf[1]; /* 0x1f2 */ + tf->lbal = gtf->tf[2]; /* 0x1f3 */ + tf->lbam = gtf->tf[3]; /* 0x1f4 */ + tf->lbah = gtf->tf[4]; /* 0x1f5 */ + tf->device = gtf->tf[5]; /* 0x1f6 */ + tf->command = gtf->tf[6]; /* 0x1f7 */ +} + +static int ata_acpi_filter_tf(const struct ata_taskfile *tf, + const struct ata_taskfile *ptf) +{ + if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) { + /* libata doesn't use ACPI to configure transfer mode. + * It will only confuse device configuration. Skip. + */ + if (tf->command == ATA_CMD_SET_FEATURES && + tf->feature == SETFEATURES_XFER) + return 1; + } + + if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) { + /* BIOS writers, sorry but we don't wanna lock + * features unless the user explicitly said so. + */ + + /* DEVICE CONFIGURATION FREEZE LOCK */ + if (tf->command == ATA_CMD_CONF_OVERLAY && + tf->feature == ATA_DCO_FREEZE_LOCK) + return 1; + + /* SECURITY FREEZE LOCK */ + if (tf->command == ATA_CMD_SEC_FREEZE_LOCK) + return 1; + + /* SET MAX LOCK and SET MAX FREEZE LOCK */ + if ((!ptf || ptf->command != ATA_CMD_READ_NATIVE_MAX) && + tf->command == ATA_CMD_SET_MAX && + (tf->feature == ATA_SET_MAX_LOCK || + tf->feature == ATA_SET_MAX_FREEZE_LOCK)) + return 1; + } + + return 0; +} + /** - * taskfile_load_raw - send taskfile registers to host controller + * ata_acpi_run_tf - send taskfile registers to host controller * @dev: target ATA device * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) * @@ -441,56 +552,77 @@ EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); * EH context. * * RETURNS: - * 0 on success, -errno on failure. + * 1 if command is executed successfully. 0 if ignored, rejected or + * filtered out, -errno on other errors. */ -static int taskfile_load_raw(struct ata_device *dev, - const struct ata_acpi_gtf *gtf) +static int ata_acpi_run_tf(struct ata_device *dev, + const struct ata_acpi_gtf *gtf, + const struct ata_acpi_gtf *prev_gtf) { - struct ata_port *ap = dev->link->ap; - struct ata_taskfile tf, rtf; + struct ata_taskfile *pptf = NULL; + struct ata_taskfile tf, ptf, rtf; unsigned int err_mask; + const char *level; + char msg[60]; + int rc; if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0) && (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0) && (gtf->tf[6] == 0)) return 0; - ata_tf_init(dev, &tf); + ata_acpi_gtf_to_tf(dev, gtf, &tf); + if (prev_gtf) { + ata_acpi_gtf_to_tf(dev, prev_gtf, &ptf); + pptf = &ptf; + } - /* convert gtf to tf */ - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */ - tf.protocol = ATA_PROT_NODATA; - tf.feature = gtf->tf[0]; /* 0x1f1 */ - tf.nsect = gtf->tf[1]; /* 0x1f2 */ - tf.lbal = gtf->tf[2]; /* 0x1f3 */ - tf.lbam = gtf->tf[3]; /* 0x1f4 */ - tf.lbah = gtf->tf[4]; /* 0x1f5 */ - tf.device = gtf->tf[5]; /* 0x1f6 */ - tf.command = gtf->tf[6]; /* 0x1f7 */ + if (!ata_acpi_filter_tf(&tf, pptf)) { + rtf = tf; + err_mask = ata_exec_internal(dev, &rtf, NULL, + DMA_NONE, NULL, 0, 0); - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "executing ACPI cmd " - "%02x/%02x:%02x:%02x:%02x:%02x:%02x\n", - tf.command, tf.feature, tf.nsect, - tf.lbal, tf.lbam, tf.lbah, tf.device); - - rtf = tf; - err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0, 0); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, - "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x failed " - "(Emask=0x%x Stat=0x%02x Err=0x%02x)\n", - tf.command, tf.feature, tf.nsect, tf.lbal, tf.lbam, - tf.lbah, tf.device, err_mask, rtf.command, rtf.feature); - return -EIO; + switch (err_mask) { + case 0: + level = KERN_DEBUG; + snprintf(msg, sizeof(msg), "succeeded"); + rc = 1; + break; + + case AC_ERR_DEV: + level = KERN_INFO; + snprintf(msg, sizeof(msg), + "rejected by device (Stat=0x%02x Err=0x%02x)", + rtf.command, rtf.feature); + rc = 0; + break; + + default: + level = KERN_ERR; + snprintf(msg, sizeof(msg), + "failed (Emask=0x%x Stat=0x%02x Err=0x%02x)", + err_mask, rtf.command, rtf.feature); + rc = -EIO; + break; + } + } else { + level = KERN_INFO; + snprintf(msg, sizeof(msg), "filtered out"); + rc = 0; } - return 0; + ata_dev_printk(dev, level, + "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x %s\n", + tf.command, tf.feature, tf.nsect, tf.lbal, + tf.lbam, tf.lbah, tf.device, msg); + + return rc; } /** * ata_acpi_exec_tfs - get then write drive taskfile settings * @dev: target ATA device + * @nr_executed: out paramter for the number of executed commands * * Evaluate _GTF and excute returned taskfiles. * @@ -498,35 +630,36 @@ static int taskfile_load_raw(struct ata_device *dev, * EH context. * * RETURNS: - * Number of executed taskfiles on success, 0 if _GTF doesn't exist or - * doesn't contain valid data. -errno on other errors. + * Number of executed taskfiles on success, 0 if _GTF doesn't exist. + * -errno on other errors. */ -static int ata_acpi_exec_tfs(struct ata_device *dev) +static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed) { - struct ata_acpi_gtf *gtf = NULL; - void *ptr_to_free = NULL; + struct ata_acpi_gtf *gtf = NULL, *pgtf = NULL; int gtf_count, i, rc; /* get taskfiles */ - gtf_count = ata_dev_get_GTF(dev, >f, &ptr_to_free); + rc = ata_dev_get_GTF(dev, >f); + if (rc < 0) + return rc; + gtf_count = rc; /* execute them */ - for (i = 0, rc = 0; i < gtf_count; i++) { - int tmp; - - /* ACPI errors are eventually ignored. Run till the - * end even after errors. - */ - tmp = taskfile_load_raw(dev, gtf++); - if (!rc) - rc = tmp; + for (i = 0; i < gtf_count; i++, gtf++) { + rc = ata_acpi_run_tf(dev, gtf, pgtf); + if (rc < 0) + break; + if (rc) { + (*nr_executed)++; + pgtf = gtf; + } } - kfree(ptr_to_free); + ata_acpi_clear_gtf(dev); - if (rc == 0) - return gtf_count; - return rc; + if (rc < 0) + return rc; + return 0; } /** @@ -596,27 +729,8 @@ static int ata_acpi_push_id(struct ata_device *dev) */ int ata_acpi_on_suspend(struct ata_port *ap) { - unsigned long flags; - int rc; - - /* proceed iff per-port acpi_handle is valid */ - if (!ap->acpi_handle) - return 0; - BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA); - - /* store timing parameters */ - rc = ata_acpi_gtm(ap, &ap->acpi_gtm); - - spin_lock_irqsave(ap->lock, flags); - if (rc == 0) - ap->pflags |= ATA_PFLAG_GTM_VALID; - else - ap->pflags &= ~ATA_PFLAG_GTM_VALID; - spin_unlock_irqrestore(ap->lock, flags); - - if (rc == -ENOENT) - rc = 0; - return rc; + /* nada */ + return 0; } /** @@ -631,18 +745,34 @@ int ata_acpi_on_suspend(struct ata_port *ap) */ void ata_acpi_on_resume(struct ata_port *ap) { + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); struct ata_device *dev; - if (ap->acpi_handle && (ap->pflags & ATA_PFLAG_GTM_VALID)) { - BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA); + if (ap->acpi_handle && gtm) { + /* _GTM valid */ /* restore timing parameters */ - ata_acpi_stm(ap, &ap->acpi_gtm); - } + ata_acpi_stm(ap, gtm); - /* schedule _GTF */ - ata_link_for_each_dev(dev, &ap->link) - dev->flags |= ATA_DFLAG_ACPI_PENDING; + /* _GTF should immediately follow _STM so that it can + * use values set by _STM. Cache _GTF result and + * schedule _GTF. + */ + ata_link_for_each_dev(dev, &ap->link) { + ata_acpi_clear_gtf(dev); + if (ata_dev_get_GTF(dev, NULL) >= 0) + dev->flags |= ATA_DFLAG_ACPI_PENDING; + } + } else { + /* SATA _GTF needs to be evaulated after _SDD and + * there's no reason to evaluate IDE _GTF early + * without _STM. Clear cache and schedule _GTF. + */ + ata_link_for_each_dev(dev, &ap->link) { + ata_acpi_clear_gtf(dev); + dev->flags |= ATA_DFLAG_ACPI_PENDING; + } + } } /** @@ -664,6 +794,7 @@ int ata_acpi_on_devcfg(struct ata_device *dev) struct ata_port *ap = dev->link->ap; struct ata_eh_context *ehc = &ap->link.eh_context; int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA; + int nr_executed = 0; int rc; if (!dev->acpi_handle) @@ -682,14 +813,14 @@ int ata_acpi_on_devcfg(struct ata_device *dev) } /* do _GTF */ - rc = ata_acpi_exec_tfs(dev); - if (rc < 0) + rc = ata_acpi_exec_tfs(dev, &nr_executed); + if (rc) goto acpi_err; dev->flags &= ~ATA_DFLAG_ACPI_PENDING; /* refresh IDENTIFY page if any _GTF command has been executed */ - if (rc > 0) { + if (nr_executed) { rc = ata_dev_reread_id(dev, 0); if (rc < 0) { ata_dev_printk(dev, KERN_ERR, "failed to IDENTIFY " @@ -701,17 +832,39 @@ int ata_acpi_on_devcfg(struct ata_device *dev) return 0; acpi_err: - /* let EH retry on the first failure, disable ACPI on the second */ - if (dev->flags & ATA_DFLAG_ACPI_FAILED) { - ata_dev_printk(dev, KERN_WARNING, "ACPI on devcfg failed the " - "second time, disabling (errno=%d)\n", rc); - - dev->acpi_handle = NULL; + /* ignore evaluation failure if we can continue safely */ + if (rc == -EINVAL && !nr_executed && !(ap->pflags & ATA_PFLAG_FROZEN)) + return 0; - /* if port is working, request IDENTIFY reload and continue */ - if (!(ap->pflags & ATA_PFLAG_FROZEN)) - rc = 1; + /* fail and let EH retry once more for unknown IO errors */ + if (!(dev->flags & ATA_DFLAG_ACPI_FAILED)) { + dev->flags |= ATA_DFLAG_ACPI_FAILED; + return rc; } - dev->flags |= ATA_DFLAG_ACPI_FAILED; + + ata_dev_printk(dev, KERN_WARNING, + "ACPI: failed the second time, disabled\n"); + dev->acpi_handle = NULL; + + /* We can safely continue if no _GTF command has been executed + * and port is not frozen. + */ + if (!nr_executed && !(ap->pflags & ATA_PFLAG_FROZEN)) + return 0; + return rc; } + +/** + * ata_acpi_on_disable - ATA ACPI hook called when a device is disabled + * @dev: target ATA device + * + * This function is called when @dev is about to be disabled. + * + * LOCKING: + * EH context. + */ +void ata_acpi_on_disable(struct ata_device *dev) +{ + ata_acpi_clear_gtf(dev); +} diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e4dea8623a7..4753a1831db 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -64,6 +64,7 @@ #include <linux/libata.h> #include <asm/semaphore.h> #include <asm/byteorder.h> +#include <linux/cdrom.h> #include "libata.h" @@ -622,6 +623,7 @@ void ata_dev_disable(struct ata_device *dev) if (ata_dev_enabled(dev)) { if (ata_msg_drv(dev->link->ap)) ata_dev_printk(dev, KERN_WARNING, "disabled\n"); + ata_acpi_on_disable(dev); ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET); dev->class++; @@ -3923,6 +3925,7 @@ void ata_std_postreset(struct ata_link *link, unsigned int *classes) /* clear SError */ if (sata_scr_read(link, SCR_ERROR, &serror) == 0) sata_scr_write(link, SCR_ERROR, serror); + link->eh_info.serror = 0; /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) @@ -4149,6 +4152,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "HITACHI HDS7250SASUN500G*", NULL, ATA_HORKAGE_NONCQ }, { "HITACHI HDS7225SBSUN250G*", NULL, ATA_HORKAGE_NONCQ }, { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, + { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ @@ -4649,6 +4653,43 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) } /** + * atapi_qc_may_overflow - Check whether data transfer may overflow + * @qc: ATA command in question + * + * ATAPI commands which transfer variable length data to host + * might overflow due to application error or hardare bug. This + * function checks whether overflow should be drained and ignored + * for @qc. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if @qc may overflow; otherwise, 0. + */ +static int atapi_qc_may_overflow(struct ata_queued_cmd *qc) +{ + if (qc->tf.protocol != ATA_PROT_ATAPI && + qc->tf.protocol != ATA_PROT_ATAPI_DMA) + return 0; + + if (qc->tf.flags & ATA_TFLAG_WRITE) + return 0; + + switch (qc->cdb[0]) { + case READ_10: + case READ_12: + case WRITE_10: + case WRITE_12: + case GPCMD_READ_CD: + case GPCMD_READ_CD_MSF: + return 0; + } + + return 1; +} + +/** * ata_std_qc_defer - Check whether a qc needs to be deferred * @qc: ATA command in question * @@ -5136,23 +5177,19 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) * Inherited from caller. * */ - -static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) +static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) { int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct scatterlist *sg = qc->__sg; - struct scatterlist *lsg = sg_last(qc->__sg, qc->n_elem); struct ata_port *ap = qc->ap; + struct ata_eh_info *ehi = &qc->dev->link->eh_info; + struct scatterlist *sg; struct page *page; unsigned char *buf; unsigned int offset, count; - int no_more_sg = 0; - - if (qc->curbytes + bytes >= qc->nbytes) - ap->hsm_task_state = HSM_ST_LAST; next_sg: - if (unlikely(no_more_sg)) { + sg = qc->cursg; + if (unlikely(!sg)) { /* * The end of qc->sg is reached and the device expects * more data to transfer. In order not to overrun qc->sg @@ -5161,21 +5198,28 @@ next_sg: * - for write case, padding zero data to the device */ u16 pad_buf[1] = { 0 }; - unsigned int words = bytes >> 1; unsigned int i; - if (words) /* warning if bytes > 1 */ - ata_dev_printk(qc->dev, KERN_WARNING, - "%u bytes trailing data\n", bytes); + if (bytes > qc->curbytes - qc->nbytes + ATAPI_MAX_DRAIN) { + ata_ehi_push_desc(ehi, "too much trailing data " + "buf=%u cur=%u bytes=%u", + qc->nbytes, qc->curbytes, bytes); + return -1; + } - for (i = 0; i < words; i++) + /* overflow is exptected for misc ATAPI commands */ + if (bytes && !atapi_qc_may_overflow(qc)) + ata_dev_printk(qc->dev, KERN_WARNING, "ATAPI %u bytes " + "trailing data (cdb=%02x nbytes=%u)\n", + bytes, qc->cdb[0], qc->nbytes); + + for (i = 0; i < (bytes + 1) / 2; i++) ap->ops->data_xfer(qc->dev, (unsigned char *)pad_buf, 2, do_write); - ap->hsm_task_state = HSM_ST_LAST; - return; - } + qc->curbytes += bytes; - sg = qc->cursg; + return 0; + } page = sg_page(sg); offset = sg->offset + qc->cursg_ofs; @@ -5210,19 +5254,20 @@ next_sg: } bytes -= count; + if ((count & 1) && bytes) + bytes--; qc->curbytes += count; qc->cursg_ofs += count; if (qc->cursg_ofs == sg->length) { - if (qc->cursg == lsg) - no_more_sg = 1; - qc->cursg = sg_next(qc->cursg); qc->cursg_ofs = 0; } if (bytes) goto next_sg; + + return 0; } /** @@ -5265,7 +5310,8 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); - __atapi_pio_bytes(qc, bytes); + if (__atapi_pio_bytes(qc, bytes)) + goto err_out; ata_altstatus(ap); /* flush */ return; @@ -7208,18 +7254,14 @@ static void ata_port_detach(struct ata_port *ap) ata_port_wait_eh(ap); - /* EH is now guaranteed to see UNLOADING, so no new device - * will be attached. Disable all existing devices. + /* EH is now guaranteed to see UNLOADING - EH context belongs + * to us. Disable all existing devices. */ - spin_lock_irqsave(ap->lock, flags); - ata_port_for_each_link(link, ap) { ata_link_for_each_dev(dev, link) ata_dev_disable(dev); } - spin_unlock_irqrestore(ap->lock, flags); - /* Final freeze & EH. All in-flight commands are aborted. EH * will be skipped and retrials will be terminated with bad * target. @@ -7251,6 +7293,9 @@ void ata_host_detach(struct ata_host *host) for (i = 0; i < host->n_ports; i++) ata_port_detach(host->ports[i]); + + /* the host is dead now, dissociate ACPI */ + ata_acpi_dissociate(host); } /** diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index e6605f03864..f0124a8d313 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1264,8 +1264,8 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) tf.feature |= ATAPI_PKT_DMA; } else { tf.protocol = ATA_PROT_ATAPI; - tf.lbam = (8 * 1024) & 0xff; - tf.lbah = (8 * 1024) >> 8; + tf.lbam = SCSI_SENSE_BUFFERSIZE; + tf.lbah = 0; } return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 0e6cf3a484d..bbe59c2fd1e 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -108,15 +108,19 @@ extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm); #ifdef CONFIG_ATA_ACPI extern void ata_acpi_associate_sata_port(struct ata_port *ap); extern void ata_acpi_associate(struct ata_host *host); +extern void ata_acpi_dissociate(struct ata_host *host); extern int ata_acpi_on_suspend(struct ata_port *ap); extern void ata_acpi_on_resume(struct ata_port *ap); -extern int ata_acpi_on_devcfg(struct ata_device *adev); +extern int ata_acpi_on_devcfg(struct ata_device *dev); +extern void ata_acpi_on_disable(struct ata_device *dev); #else static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { } static inline void ata_acpi_associate(struct ata_host *host) { } +static inline void ata_acpi_dissociate(struct ata_host *host) { } static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; } static inline void ata_acpi_on_resume(struct ata_port *ap) { } -static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; } +static inline int ata_acpi_on_devcfg(struct ata_device *dev) { return 0; } +static inline void ata_acpi_on_disable(struct ata_device *dev) { } #endif /* libata-scsi.c */ diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 46dc70e0dee..c79f066c2bc 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -375,7 +375,7 @@ static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline) pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000); pci_read_config_byte(pdev, 0x5A, &ata66); /* Reset TCBLID/FCBLID to output */ - pci_write_config_word(pdev, 0x52, mcr3); + pci_write_config_word(pdev, mcrbase + 2, mcr3); if (ata66 & (2 >> ap->port_no)) ap->cbl = ATA_CBL_PATA40; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index fe0105d35ba..37b850ae084 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2506,11 +2506,31 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) if (pdev->vendor == PCI_VENDOR_ID_TTI && (pdev->device == 0x2300 || pdev->device == 0x2310)) { - printk(KERN_WARNING "sata_mv: Highpoint RocketRAID BIOS" - " will CORRUPT DATA on attached drives when" - " configured as \"Legacy\". BEWARE!\n"); - printk(KERN_WARNING "sata_mv: Use BIOS \"JBOD\" volumes" - " instead for safety.\n"); + /* + * Highpoint RocketRAID PCIe 23xx series cards: + * + * Unconfigured drives are treated as "Legacy" + * by the BIOS, and it overwrites sector 8 with + * a "Lgcy" metadata block prior to Linux boot. + * + * Configured drives (RAID or JBOD) leave sector 8 + * alone, but instead overwrite a high numbered + * sector for the RAID metadata. This sector can + * be determined exactly, by truncating the physical + * drive capacity to a nice even GB value. + * + * RAID metadata is at: (dev->n_sectors & ~0xfffff) + * + * Warn the user, lest they think we're just buggy. + */ + printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID" + " BIOS CORRUPTS DATA on all attached drives," + " regardless of if/how they are configured." + " BEWARE!\n"); + printk(KERN_WARNING DRV_NAME ": For data safety, do not" + " use sectors 8-9 on \"Legacy\" drives," + " and avoid the final two gigabytes on" + " all RocketRAID BIOS initialized drives.\n"); } case chip_6042: hpriv->ops = &mv6xxx_ops; diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 4e6e381279c..f5119bf40c2 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -390,23 +390,19 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) sil_scr_read(ap, SCR_ERROR, &serror); sil_scr_write(ap, SCR_ERROR, serror); - /* Trigger hotplug and accumulate SError only if the - * port isn't already frozen. Otherwise, PHY events - * during hardreset makes controllers with broken SIEN - * repeat probing needlessly. + /* Sometimes spurious interrupts occur, double check + * it's PHYRDY CHG. */ - if (!(ap->pflags & ATA_PFLAG_FROZEN)) { - ata_ehi_hotplugged(&ap->link.eh_info); + if (serror & SERR_PHYRDY_CHG) { ap->link.eh_info.serror |= serror; + goto freeze; } - goto freeze; + if (!(bmdma2 & SIL_DMA_COMPLETE)) + return; } - if (unlikely(!qc)) - goto freeze; - - if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) { + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { /* this sometimes happens, just clear IRQ */ ata_chk_status(ap); return; diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 8b12925fe7a..f97e050338f 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -2689,7 +2689,7 @@ fore200e_init(struct fore200e* fore200e) return 0; } - +#ifdef CONFIG_ATM_FORE200E_PCA static int __devinit fore200e_pca_detect(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent) { @@ -2756,7 +2756,6 @@ static void __devexit fore200e_pca_remove_one(struct pci_dev *pci_dev) } -#ifdef CONFIG_ATM_FORE200E_PCA static struct pci_device_id fore200e_pca_tbl[] = { { PCI_VENDOR_ID_FORE, PCI_DEVICE_ID_FORE_PCA200E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &fore200e_bus[0] }, diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c index b1d00ef6659..ad00b3d9471 100644 --- a/drivers/block/aoe/aoeblk.c +++ b/drivers/block/aoe/aoeblk.c @@ -6,6 +6,7 @@ #include <linux/hdreg.h> #include <linux/blkdev.h> +#include <linux/backing-dev.h> #include <linux/fs.h> #include <linux/ioctl.h> #include <linux/genhd.h> @@ -210,25 +211,20 @@ aoeblk_gdalloc(void *vp) if (gd == NULL) { printk(KERN_ERR "aoe: cannot allocate disk structure for %ld.%ld\n", d->aoemajor, d->aoeminor); - spin_lock_irqsave(&d->lock, flags); - d->flags &= ~DEVFL_GDALLOC; - spin_unlock_irqrestore(&d->lock, flags); - return; + goto err; } d->bufpool = mempool_create_slab_pool(MIN_BUFS, buf_pool_cache); if (d->bufpool == NULL) { printk(KERN_ERR "aoe: cannot allocate bufpool for %ld.%ld\n", d->aoemajor, d->aoeminor); - put_disk(gd); - spin_lock_irqsave(&d->lock, flags); - d->flags &= ~DEVFL_GDALLOC; - spin_unlock_irqrestore(&d->lock, flags); - return; + goto err_disk; } - spin_lock_irqsave(&d->lock, flags); blk_queue_make_request(&d->blkq, aoeblk_make_request); + if (bdi_init(&d->blkq.backing_dev_info)) + goto err_mempool; + spin_lock_irqsave(&d->lock, flags); gd->major = AOE_MAJOR; gd->first_minor = d->sysminor * AOE_PARTITIONS; gd->fops = &aoe_bdops; @@ -246,6 +242,16 @@ aoeblk_gdalloc(void *vp) add_disk(gd); aoedisk_add_sysfs(d); + return; + +err_mempool: + mempool_destroy(d->bufpool); +err_disk: + put_disk(gd); +err: + spin_lock_irqsave(&d->lock, flags); + d->flags &= ~DEVFL_GDALLOC; + spin_unlock_irqrestore(&d->lock, flags); } void diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index a5ee21319d3..3535ef89667 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -117,8 +117,10 @@ static struct pktcdvd_kobj* pkt_kobj_create(struct pktcdvd_device *pd, p->kobj.parent = parent; p->kobj.ktype = ktype; p->pd = pd; - if (kobject_register(&p->kobj) != 0) + if (kobject_register(&p->kobj) != 0) { + kobject_put(&p->kobj); return NULL; + } return p; } /* diff --git a/drivers/block/umem.c b/drivers/block/umem.c index 99806f9ee4c..c24e1bdbad4 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -34,7 +34,7 @@ * - set initialised bit then. */ -//#define DEBUG /* uncomment if you want debugging info (pr_debug) */ +#undef DEBUG /* #define DEBUG if you want debugging info (pr_debug) */ #include <linux/fs.h> #include <linux/bio.h> #include <linux/kernel.h> @@ -143,17 +143,12 @@ static struct cardinfo cards[MM_MAXCARDS]; static struct block_device_operations mm_fops; static struct timer_list battery_timer; -static int num_cards = 0; +static int num_cards; static struct gendisk *mm_gendisk[MM_MAXCARDS]; static void check_batteries(struct cardinfo *card); -/* ------------------------------------------------------------------------------------ --- get_userbit ------------------------------------------------------------------------------------ -*/ static int get_userbit(struct cardinfo *card, int bit) { unsigned char led; @@ -161,11 +156,7 @@ static int get_userbit(struct cardinfo *card, int bit) led = readb(card->csr_remap + MEMCTRLCMD_LEDCTRL); return led & bit; } -/* ------------------------------------------------------------------------------------ --- set_userbit ------------------------------------------------------------------------------------ -*/ + static int set_userbit(struct cardinfo *card, int bit, unsigned char state) { unsigned char led; @@ -179,11 +170,7 @@ static int set_userbit(struct cardinfo *card, int bit, unsigned char state) return 0; } -/* ------------------------------------------------------------------------------------ --- set_led ------------------------------------------------------------------------------------ -*/ + /* * NOTE: For the power LED, use the LED_POWER_* macros since they differ */ @@ -203,11 +190,6 @@ static void set_led(struct cardinfo *card, int shift, unsigned char state) } #ifdef MM_DIAG -/* ------------------------------------------------------------------------------------ --- dump_regs ------------------------------------------------------------------------------------ -*/ static void dump_regs(struct cardinfo *card) { unsigned char *p; @@ -224,32 +206,28 @@ static void dump_regs(struct cardinfo *card) } } #endif -/* ------------------------------------------------------------------------------------ --- dump_dmastat ------------------------------------------------------------------------------------ -*/ + static void dump_dmastat(struct cardinfo *card, unsigned int dmastat) { dev_printk(KERN_DEBUG, &card->dev->dev, "DMAstat - "); if (dmastat & DMASCR_ANY_ERR) - printk("ANY_ERR "); + printk(KERN_CONT "ANY_ERR "); if (dmastat & DMASCR_MBE_ERR) - printk("MBE_ERR "); + printk(KERN_CONT "MBE_ERR "); if (dmastat & DMASCR_PARITY_ERR_REP) - printk("PARITY_ERR_REP "); + printk(KERN_CONT "PARITY_ERR_REP "); if (dmastat & DMASCR_PARITY_ERR_DET) - printk("PARITY_ERR_DET "); + printk(KERN_CONT "PARITY_ERR_DET "); if (dmastat & DMASCR_SYSTEM_ERR_SIG) - printk("SYSTEM_ERR_SIG "); + printk(KERN_CONT "SYSTEM_ERR_SIG "); if (dmastat & DMASCR_TARGET_ABT) - printk("TARGET_ABT "); + printk(KERN_CONT "TARGET_ABT "); if (dmastat & DMASCR_MASTER_ABT) - printk("MASTER_ABT "); + printk(KERN_CONT "MASTER_ABT "); if (dmastat & DMASCR_CHAIN_COMPLETE) - printk("CHAIN_COMPLETE "); + printk(KERN_CONT "CHAIN_COMPLETE "); if (dmastat & DMASCR_DMA_COMPLETE) - printk("DMA_COMPLETE "); + printk(KERN_CONT "DMA_COMPLETE "); printk("\n"); } @@ -286,7 +264,8 @@ static void mm_start_io(struct cardinfo *card) /* make the last descriptor end the chain */ page = &card->mm_pages[card->Active]; - pr_debug("start_io: %d %d->%d\n", card->Active, page->headcnt, page->cnt-1); + pr_debug("start_io: %d %d->%d\n", + card->Active, page->headcnt, page->cnt - 1); desc = &page->desc[page->cnt-1]; desc->control_bits |= cpu_to_le32(DMASCR_CHAIN_COMP_EN); @@ -310,8 +289,8 @@ static void mm_start_io(struct cardinfo *card) writel(0, card->csr_remap + DMA_SEMAPHORE_ADDR); writel(0, card->csr_remap + DMA_SEMAPHORE_ADDR + 4); - offset = ((char*)desc) - ((char*)page->desc); - writel(cpu_to_le32((page->page_dma+offset)&0xffffffff), + offset = ((char *)desc) - ((char *)page->desc); + writel(cpu_to_le32((page->page_dma+offset) & 0xffffffff), card->csr_remap + DMA_DESCRIPTOR_ADDR); /* Force the value to u64 before shifting otherwise >> 32 is undefined C * and on some ports will do nothing ! */ @@ -352,7 +331,7 @@ static inline void reset_page(struct mm_page *page) page->cnt = 0; page->headcnt = 0; page->bio = NULL; - page->biotail = & page->bio; + page->biotail = &page->bio; } static void mm_unplug_device(struct request_queue *q) @@ -408,7 +387,7 @@ static int add_bio(struct cardinfo *card) vec->bv_page, vec->bv_offset, len, - (rw==READ) ? + (rw == READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE); p = &card->mm_pages[card->Ready]; @@ -427,10 +406,10 @@ static int add_bio(struct cardinfo *card) desc->pci_addr = cpu_to_le64((u64)desc->data_dma_handle); desc->local_addr = cpu_to_le64(card->current_sector << 9); desc->transfer_size = cpu_to_le32(len); - offset = ( ((char*)&desc->sem_control_bits) - ((char*)p->desc)); + offset = (((char *)&desc->sem_control_bits) - ((char *)p->desc)); desc->sem_addr = cpu_to_le64((u64)(p->page_dma+offset)); desc->zero1 = desc->zero2 = 0; - offset = ( ((char*)(desc+1)) - ((char*)p->desc)); + offset = (((char *)(desc+1)) - ((char *)p->desc)); desc->next_desc_addr = cpu_to_le64(p->page_dma+offset); desc->control_bits = cpu_to_le32(DMASCR_GO|DMASCR_ERR_INT_EN| DMASCR_PARITY_INT_EN| @@ -455,11 +434,11 @@ static void process_page(unsigned long data) /* check if any of the requests in the page are DMA_COMPLETE, * and deal with them appropriately. * If we find a descriptor without DMA_COMPLETE in the semaphore, then - * dma must have hit an error on that descriptor, so use dma_status instead - * and assume that all following descriptors must be re-tried. + * dma must have hit an error on that descriptor, so use dma_status + * instead and assume that all following descriptors must be re-tried. */ struct mm_page *page; - struct bio *return_bio=NULL; + struct bio *return_bio = NULL; struct cardinfo *card = (struct cardinfo *)data; unsigned int dma_status = card->dma_status; @@ -472,24 +451,25 @@ static void process_page(unsigned long data) struct bio *bio = page->bio; struct mm_dma_desc *desc = &page->desc[page->headcnt]; int control = le32_to_cpu(desc->sem_control_bits); - int last=0; + int last = 0; int idx; if (!(control & DMASCR_DMA_COMPLETE)) { control = dma_status; - last=1; + last = 1; } page->headcnt++; idx = page->idx; page->idx++; if (page->idx >= bio->bi_vcnt) { page->bio = bio->bi_next; - page->idx = page->bio->bi_idx; + if (page->bio) + page->idx = page->bio->bi_idx; } pci_unmap_page(card->dev, desc->data_dma_handle, - bio_iovec_idx(bio,idx)->bv_len, - (control& DMASCR_TRANSFER_READ) ? + bio_iovec_idx(bio, idx)->bv_len, + (control & DMASCR_TRANSFER_READ) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); if (control & DMASCR_HARD_ERROR) { /* error */ @@ -500,9 +480,10 @@ static void process_page(unsigned long data) le32_to_cpu(desc->transfer_size)); dump_dmastat(card, control); } else if (test_bit(BIO_RW, &bio->bi_rw) && - le32_to_cpu(desc->local_addr)>>9 == card->init_size) { - card->init_size += le32_to_cpu(desc->transfer_size)>>9; - if (card->init_size>>1 >= card->mm_size) { + le32_to_cpu(desc->local_addr) >> 9 == + card->init_size) { + card->init_size += le32_to_cpu(desc->transfer_size) >> 9; + if (card->init_size >> 1 >= card->mm_size) { dev_printk(KERN_INFO, &card->dev->dev, "memory now initialised\n"); set_userbit(card, MEMORY_INITIALIZED, 1); @@ -513,7 +494,8 @@ static void process_page(unsigned long data) return_bio = bio; } - if (last) break; + if (last) + break; } if (debug & DEBUG_LED_ON_TRANSFER) @@ -535,7 +517,7 @@ static void process_page(unsigned long data) out_unlock: spin_unlock_bh(&card->lock); - while(return_bio) { + while (return_bio) { struct bio *bio = return_bio; return_bio = bio->bi_next; @@ -544,11 +526,6 @@ static void process_page(unsigned long data) } } -/* ------------------------------------------------------------------------------------ --- mm_make_request ------------------------------------------------------------------------------------ -*/ static int mm_make_request(struct request_queue *q, struct bio *bio) { struct cardinfo *card = q->queuedata; @@ -565,11 +542,6 @@ static int mm_make_request(struct request_queue *q, struct bio *bio) return 0; } -/* ------------------------------------------------------------------------------------ --- mm_interrupt ------------------------------------------------------------------------------------ -*/ static irqreturn_t mm_interrupt(int irq, void *__card) { struct cardinfo *card = (struct cardinfo *) __card; @@ -583,15 +555,15 @@ HW_TRACE(0x30); if (!(dma_status & (DMASCR_ERROR_MASK | DMASCR_CHAIN_COMPLETE))) { /* interrupt wasn't for me ... */ return IRQ_NONE; - } + } /* clear COMPLETION interrupts */ if (card->flags & UM_FLAG_NO_BYTE_STATUS) writel(cpu_to_le32(DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE), - card->csr_remap+ DMA_STATUS_CTRL); + card->csr_remap + DMA_STATUS_CTRL); else writeb((DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE) >> 16, - card->csr_remap+ DMA_STATUS_CTRL + 2); + card->csr_remap + DMA_STATUS_CTRL + 2); /* log errors and clear interrupt status */ if (dma_status & DMASCR_ANY_ERR) { @@ -601,9 +573,12 @@ HW_TRACE(0x30); stat = readb(card->csr_remap + MEMCTRLCMD_ERRSTATUS); - data_log1 = le32_to_cpu(readl(card->csr_remap + ERROR_DATA_LOG)); - data_log2 = le32_to_cpu(readl(card->csr_remap + ERROR_DATA_LOG + 4)); - addr_log1 = le32_to_cpu(readl(card->csr_remap + ERROR_ADDR_LOG)); + data_log1 = le32_to_cpu(readl(card->csr_remap + + ERROR_DATA_LOG)); + data_log2 = le32_to_cpu(readl(card->csr_remap + + ERROR_DATA_LOG + 4)); + addr_log1 = le32_to_cpu(readl(card->csr_remap + + ERROR_ADDR_LOG)); addr_log2 = readb(card->csr_remap + ERROR_ADDR_LOG + 4); count = readb(card->csr_remap + ERROR_COUNT); @@ -670,11 +645,7 @@ HW_TRACE(0x36); return IRQ_HANDLED; } -/* ------------------------------------------------------------------------------------ --- set_fault_to_battery_status ------------------------------------------------------------------------------------ -*/ + /* * If both batteries are good, no LED * If either battery has been warned, solid LED @@ -695,12 +666,6 @@ static void set_fault_to_battery_status(struct cardinfo *card) static void init_battery_timer(void); - -/* ------------------------------------------------------------------------------------ --- check_battery ------------------------------------------------------------------------------------ -*/ static int check_battery(struct cardinfo *card, int battery, int status) { if (status != card->battery[battery].good) { @@ -729,11 +694,7 @@ static int check_battery(struct cardinfo *card, int battery, int status) return 0; } -/* ------------------------------------------------------------------------------------ --- check_batteries ------------------------------------------------------------------------------------ -*/ + static void check_batteries(struct cardinfo *card) { /* NOTE: this must *never* be called while the card @@ -774,11 +735,7 @@ static void check_all_batteries(unsigned long ptr) init_battery_timer(); } -/* ------------------------------------------------------------------------------------ --- init_battery_timer ------------------------------------------------------------------------------------ -*/ + static void init_battery_timer(void) { init_timer(&battery_timer); @@ -786,20 +743,12 @@ static void init_battery_timer(void) battery_timer.expires = jiffies + (HZ * 60); add_timer(&battery_timer); } -/* ------------------------------------------------------------------------------------ --- del_battery_timer ------------------------------------------------------------------------------------ -*/ + static void del_battery_timer(void) { del_timer(&battery_timer); } -/* ------------------------------------------------------------------------------------ --- mm_revalidate ------------------------------------------------------------------------------------ -*/ + /* * Note no locks taken out here. In a worst case scenario, we could drop * a chunk of system memory. But that should never happen, since validation @@ -832,33 +781,23 @@ static int mm_getgeo(struct block_device *bdev, struct hd_geometry *geo) } /* ------------------------------------------------------------------------------------ --- mm_check_change ------------------------------------------------------------------------------------ - Future support for removable devices -*/ + * Future support for removable devices + */ static int mm_check_change(struct gendisk *disk) { /* struct cardinfo *dev = disk->private_data; */ return 0; } -/* ------------------------------------------------------------------------------------ --- mm_fops ------------------------------------------------------------------------------------ -*/ + static struct block_device_operations mm_fops = { .owner = THIS_MODULE, .getgeo = mm_getgeo, - .revalidate_disk= mm_revalidate, + .revalidate_disk = mm_revalidate, .media_changed = mm_check_change, }; -/* ------------------------------------------------------------------------------------ --- mm_pci_probe ------------------------------------------------------------------------------------ -*/ -static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) + +static int __devinit mm_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) { int ret = -ENODEV; struct cardinfo *card = &cards[num_cards]; @@ -888,7 +827,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i return -ENODEV; dev_printk(KERN_INFO, &dev->dev, - "Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))\n"); + "Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))\n"); if (pci_set_dma_mask(dev, DMA_64BIT_MASK) && pci_set_dma_mask(dev, DMA_32BIT_MASK)) { @@ -916,7 +855,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i "CSR 0x%08lx -> 0x%p (0x%lx)\n", csr_base, card->csr_remap, csr_len); - switch(card->dev->device) { + switch (card->dev->device) { case 0x5415: card->flags |= UM_FLAG_NO_BYTE_STATUS | UM_FLAG_NO_BATTREG; magic_number = 0x59; @@ -928,7 +867,8 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i break; case 0x6155: - card->flags |= UM_FLAG_NO_BYTE_STATUS | UM_FLAG_NO_BATTREG | UM_FLAG_NO_BATT; + card->flags |= UM_FLAG_NO_BYTE_STATUS | + UM_FLAG_NO_BATTREG | UM_FLAG_NO_BATT; magic_number = 0x99; break; @@ -944,11 +884,11 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i } card->mm_pages[0].desc = pci_alloc_consistent(card->dev, - PAGE_SIZE*2, - &card->mm_pages[0].page_dma); + PAGE_SIZE * 2, + &card->mm_pages[0].page_dma); card->mm_pages[1].desc = pci_alloc_consistent(card->dev, - PAGE_SIZE*2, - &card->mm_pages[1].page_dma); + PAGE_SIZE * 2, + &card->mm_pages[1].page_dma); if (card->mm_pages[0].desc == NULL || card->mm_pages[1].desc == NULL) { dev_printk(KERN_ERR, &card->dev->dev, "alloc failed\n"); @@ -1012,9 +952,9 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i dev_printk(KERN_INFO, &card->dev->dev, "Size %d KB, Battery 1 %s (%s), Battery 2 %s (%s)\n", card->mm_size, - (batt_status & BATTERY_1_DISABLED ? "Disabled" : "Enabled"), + batt_status & BATTERY_1_DISABLED ? "Disabled" : "Enabled", card->battery[0].good ? "OK" : "FAILURE", - (batt_status & BATTERY_2_DISABLED ? "Disabled" : "Enabled"), + batt_status & BATTERY_2_DISABLED ? "Disabled" : "Enabled", card->battery[1].good ? "OK" : "FAILURE"); set_fault_to_battery_status(card); @@ -1029,18 +969,18 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i data = ~data; data += 1; - if (request_irq(dev->irq, mm_interrupt, IRQF_SHARED, DRIVER_NAME, card)) { + if (request_irq(dev->irq, mm_interrupt, IRQF_SHARED, DRIVER_NAME, + card)) { dev_printk(KERN_ERR, &card->dev->dev, "Unable to allocate IRQ\n"); ret = -ENODEV; - goto failed_req_irq; } dev_printk(KERN_INFO, &card->dev->dev, "Window size %d bytes, IRQ %d\n", data, dev->irq); - spin_lock_init(&card->lock); + spin_lock_init(&card->lock); pci_set_drvdata(dev, card); @@ -1059,7 +999,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i if (!get_userbit(card, MEMORY_INITIALIZED)) { dev_printk(KERN_INFO, &card->dev->dev, - "memory NOT initialized. Consider over-writing whole device.\n"); + "memory NOT initialized. Consider over-writing whole device.\n"); card->init_size = 0; } else { dev_printk(KERN_INFO, &card->dev->dev, @@ -1090,11 +1030,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i return ret; } -/* ------------------------------------------------------------------------------------ --- mm_pci_remove ------------------------------------------------------------------------------------ -*/ + static void mm_pci_remove(struct pci_dev *dev) { struct cardinfo *card = pci_get_drvdata(dev); @@ -1118,16 +1054,16 @@ static void mm_pci_remove(struct pci_dev *dev) } static const struct pci_device_id mm_pci_ids[] = { - {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_5415CN)}, - {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_5425CN)}, - {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_6155)}, + {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_5415CN)}, + {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_5425CN)}, + {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_6155)}, { .vendor = 0x8086, .device = 0xB555, - .subvendor= 0x1332, - .subdevice= 0x5460, - .class = 0x050000, - .class_mask= 0, + .subvendor = 0x1332, + .subdevice = 0x5460, + .class = 0x050000, + .class_mask = 0, }, { /* end: all zeroes */ } }; @@ -1140,12 +1076,6 @@ static struct pci_driver mm_pci_driver = { .remove = mm_pci_remove, }; -/* ------------------------------------------------------------------------------------ --- mm_init ------------------------------------------------------------------------------------ -*/ - static int __init mm_init(void) { int retval, i; @@ -1192,18 +1122,14 @@ out: put_disk(mm_gendisk[i]); return -ENOMEM; } -/* ------------------------------------------------------------------------------------ --- mm_cleanup ------------------------------------------------------------------------------------ -*/ + static void __exit mm_cleanup(void) { int i; del_battery_timer(); - for (i=0; i < num_cards ; i++) { + for (i = 0; i < num_cards ; i++) { del_gendisk(mm_gendisk[i]); put_disk(mm_gendisk[i]); } diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index a509b8d7978..ef1ed5d7012 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -543,28 +543,6 @@ config PPDEV If unsure, say N. -config TIPAR - tristate "Texas Instruments parallel link cable support" - depends on PARPORT - ---help--- - If you own a Texas Instruments graphing calculator and use a - parallel link cable, then you might be interested in this driver. - - If you enable this driver, you will be able to communicate with - your calculator through a set of device nodes under /dev. The - main advantage of this driver is that you don't have to be root - to use this precise link cable (depending on the permissions on - the device nodes, though). - - To compile this driver as a module, choose M here: the - module will be called tipar. - - If you don't know what a parallel link cable is or what a Texas - Instruments graphing calculator is, then you probably don't need this - driver. - - If unsure, say N. - config HVC_DRIVER bool help diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index e686fc92516..8f45ca9235a 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -669,6 +669,7 @@ static int ipmi_ioctl(struct inode *inode, struct file *file, return 0; case WDIOC_SET_PRETIMEOUT: + case WDIOC_SETPRETIMEOUT: i = copy_from_user(&val, argp, sizeof(int)); if (i) return -EFAULT; @@ -676,6 +677,7 @@ static int ipmi_ioctl(struct inode *inode, struct file *file, return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); case WDIOC_GET_PRETIMEOUT: + case WDIOC_GETPRETIMEOUT: i = copy_to_user(argp, &pretimeout, sizeof(pretimeout)); if (i) return -EFAULT; diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c deleted file mode 100644 index cef55c40654..00000000000 --- a/drivers/char/tipar.c +++ /dev/null @@ -1,557 +0,0 @@ -/* Hey EMACS -*- linux-c -*- - * - * tipar - low level driver for handling a parallel link cable designed - * for Texas Instruments graphing calculators (http://lpg.ticalc.org). - * A part of the TiLP project. - * - * Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org> - * under the terms of the GNU General Public License. - * - * Various fixes & clean-up from the Linux Kernel Mailing List - * (Alan Cox, Richard B. Johnson, Christoph Hellwig). - */ - -/* This driver should, in theory, work with any parallel port that has an - * appropriate low-level driver; all I/O is done through the parport - * abstraction layer. - * - * If this driver is built into the kernel, you can configure it using the - * kernel command-line. For example: - * - * tipar=timeout,delay (set timeout and delay) - * - * If the driver is loaded as a module, similar functionality is available - * using module parameters. The equivalent of the above commands would be: - * - * # insmod tipar timeout=15 delay=10 - */ - -/* COMPATIBILITY WITH OLD KERNELS - * - * Usually, parallel cables were bound to ports at - * particular I/O addresses, as follows: - * - * tipar0 0x378 - * tipar1 0x278 - * tipar2 0x3bc - * - * - * This driver, by default, binds tipar devices according to parport and - * the minor number. - * - */ -#undef DEBUG /* change to #define to get debugging - * output - for pr_debug() */ -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/delay.h> -#include <linux/fcntl.h> -#include <linux/fs.h> -#include <linux/init.h> -#include <asm/uaccess.h> -#include <linux/ioport.h> -#include <asm/io.h> -#include <linux/bitops.h> -#include <linux/parport.h> /* Our code depend on parport */ -#include <linux/device.h> - -/* - * TI definitions - */ -#include <linux/ticable.h> - -/* - * Version Information - */ -#define DRIVER_VERSION "1.19" -#define DRIVER_AUTHOR "Romain Lievin <roms@lpg.ticalc.org>" -#define DRIVER_DESC "Device driver for TI/PC parallel link cables" -#define DRIVER_LICENSE "GPL" - -#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) - -/* ----- global variables --------------------------------------------- */ - -struct tipar_struct { - struct pardevice *dev; /* Parport device entry */ -}; - -#define PP_NO 3 -static struct tipar_struct table[PP_NO]; - -static int delay = IO_DELAY; /* inter-bit delay in microseconds */ -static int timeout = TIMAXTIME; /* timeout in tenth of seconds */ - -static unsigned int tp_count; /* tipar count */ -static unsigned long opened; /* opened devices */ - -static struct class *tipar_class; - -/* --- macros for parport access -------------------------------------- */ - -#define r_dtr(x) (parport_read_data(table[(x)].dev->port)) -#define r_str(x) (parport_read_status(table[(x)].dev->port)) -#define w_ctr(x,y) (parport_write_control(table[(x)].dev->port, (y))) -#define w_dtr(x,y) (parport_write_data(table[(x)].dev->port, (y))) - -/* --- setting states on the D-bus with the right timing: ------------- */ - -static inline void -outbyte(int value, int minor) -{ - w_dtr(minor, value); -} - -static inline int -inbyte(int minor) -{ - return (r_str(minor)); -} - -static inline void -init_ti_parallel(int minor) -{ - outbyte(3, minor); -} - -/* ----- global defines ----------------------------------------------- */ - -#define START(x) { x = jiffies + (HZ * timeout) / 10; } -#define WAIT(x) { \ - if (time_before((x), jiffies)) return -1; \ - if (need_resched()) schedule(); } - -/* ----- D-bus bit-banging functions ---------------------------------- */ - -/* D-bus protocol (45kbit/s max): - 1 0 0 - _______ ______|______ __________|________ __________ -Red : ________ | ____ | ____ - _ ____________|________ ______|__________ _____ -White: ________ | ______ | _______ -*/ - -/* Try to transmit a byte on the specified port (-1 if error). */ -static int -put_ti_parallel(int minor, unsigned char data) -{ - unsigned int bit; - unsigned long max; - - for (bit = 0; bit < 8; bit++) { - if (data & 1) { - outbyte(2, minor); - START(max); - do { - WAIT(max); - } while (inbyte(minor) & 0x10); - - outbyte(3, minor); - START(max); - do { - WAIT(max); - } while (!(inbyte(minor) & 0x10)); - } else { - outbyte(1, minor); - START(max); - do { - WAIT(max); - } while (inbyte(minor) & 0x20); - - outbyte(3, minor); - START(max); - do { - WAIT(max); - } while (!(inbyte(minor) & 0x20)); - } - - data >>= 1; - udelay(delay); - - if (need_resched()) - schedule(); - } - - return 0; -} - -/* Receive a byte on the specified port or -1 if error. */ -static int -get_ti_parallel(int minor) -{ - unsigned int bit; - unsigned char v, data = 0; - unsigned long max; - - for (bit = 0; bit < 8; bit++) { - START(max); - do { - WAIT(max); - } while ((v = inbyte(minor) & 0x30) == 0x30); - - if (v == 0x10) { - data = (data >> 1) | 0x80; - outbyte(1, minor); - START(max); - do { - WAIT(max); - } while (!(inbyte(minor) & 0x20)); - outbyte(3, minor); - } else { - data = data >> 1; - outbyte(2, minor); - START(max); - do { - WAIT(max); - } while (!(inbyte(minor) & 0x10)); - outbyte(3, minor); - } - - udelay(delay); - if (need_resched()) - schedule(); - } - - return (int) data; -} - -/* Try to detect a parallel link cable on the specified port */ -static int -probe_ti_parallel(int minor) -{ - int i; - int seq[] = { 0x00, 0x20, 0x10, 0x30 }; - int data; - - for (i = 3; i >= 0; i--) { - outbyte(3, minor); - outbyte(i, minor); - udelay(delay); - data = inbyte(minor) & 0x30; - pr_debug("tipar: Probing -> %i: 0x%02x 0x%02x\n", i, - data, seq[i]); - if (data != seq[i]) { - outbyte(3, minor); - return -1; - } - } - - outbyte(3, minor); - return 0; -} - -/* ----- kernel module functions--------------------------------------- */ - -static int -tipar_open(struct inode *inode, struct file *file) -{ - unsigned int minor = iminor(inode) - TIPAR_MINOR; - - if (tp_count == 0 || minor > tp_count - 1) - return -ENXIO; - - if (test_and_set_bit(minor, &opened)) - return -EBUSY; - - if (!table[minor].dev) { - printk(KERN_ERR "%s: NULL device for minor %u\n", - __FUNCTION__, minor); - return -ENXIO; - } - parport_claim_or_block(table[minor].dev); - init_ti_parallel(minor); - parport_release(table[minor].dev); - - return nonseekable_open(inode, file); -} - -static int -tipar_close(struct inode *inode, struct file *file) -{ - unsigned int minor = iminor(inode) - TIPAR_MINOR; - - if (minor > tp_count - 1) - return -ENXIO; - - clear_bit(minor, &opened); - - return 0; -} - -static ssize_t -tipar_write (struct file *file, const char __user *buf, size_t count, - loff_t * ppos) -{ - unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR; - ssize_t n; - - parport_claim_or_block(table[minor].dev); - - for (n = 0; n < count; n++) { - unsigned char b; - - if (get_user(b, buf + n)) { - n = -EFAULT; - goto out; - } - - if (put_ti_parallel(minor, b) == -1) { - init_ti_parallel(minor); - n = -ETIMEDOUT; - goto out; - } - } - out: - parport_release(table[minor].dev); - return n; -} - -static ssize_t -tipar_read(struct file *file, char __user *buf, size_t count, loff_t * ppos) -{ - int b = 0; - unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR; - ssize_t retval = 0; - ssize_t n = 0; - - if (count == 0) - return 0; - - parport_claim_or_block(table[minor].dev); - - while (n < count) { - b = get_ti_parallel(minor); - if (b == -1) { - init_ti_parallel(minor); - retval = -ETIMEDOUT; - goto out; - } else { - if (put_user(b, buf + n)) { - retval = -EFAULT; - break; - } else - retval = ++n; - } - - /* Non-blocking mode : try again ! */ - if (file->f_flags & O_NONBLOCK) { - retval = -EAGAIN; - goto out; - } - - /* Signal pending, try again ! */ - if (signal_pending(current)) { - retval = -ERESTARTSYS; - goto out; - } - - if (need_resched()) - schedule(); - } - - out: - parport_release(table[minor].dev); - return retval; -} - -static int -tipar_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - int retval = 0; - - switch (cmd) { - case IOCTL_TIPAR_DELAY: - delay = (int)arg; //get_user(delay, &arg); - break; - case IOCTL_TIPAR_TIMEOUT: - if (arg != 0) - timeout = (int)arg; - else - retval = -EINVAL; - break; - default: - retval = -ENOTTY; - break; - } - - return retval; -} - -/* ----- kernel module registering ------------------------------------ */ - -static const struct file_operations tipar_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = tipar_read, - .write = tipar_write, - .ioctl = tipar_ioctl, - .open = tipar_open, - .release = tipar_close, -}; - -/* --- initialisation code ------------------------------------- */ - -#ifndef MODULE -/* You must set these - there is no sane way to probe for this cable. - * You can use 'tipar=timeout,delay' to set these now. */ -static int __init -tipar_setup(char *str) -{ - int ints[3]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - if (ints[0] > 0) { - if (ints[1] != 0) - timeout = ints[1]; - else - printk(KERN_WARNING "tipar: bad timeout value (0), " - "using default value instead"); - if (ints[0] > 1) { - delay = ints[2]; - } - } - - return 1; -} -#endif - -/* - * Register our module into parport. - * Pass also 2 callbacks functions to parport: a pre-emptive function and an - * interrupt handler function (unused). - * Display a message such "tipar0: using parport0 (polling)". - */ -static int -tipar_register(int nr, struct parport *port) -{ - int err = 0; - - /* Register our module into parport */ - table[nr].dev = parport_register_device(port, "tipar", - NULL, NULL, NULL, 0, - (void *) &table[nr]); - - if (table[nr].dev == NULL) { - err = 1; - goto out; - } - - device_create(tipar_class, port->dev, MKDEV(TIPAR_MAJOR, - TIPAR_MINOR + nr), "par%d", nr); - - /* Display informations */ - pr_info("tipar%d: using %s (%s)\n", nr, port->name, (port->irq == - PARPORT_IRQ_NONE) ? "polling" : "interrupt-driven"); - - if (probe_ti_parallel(nr) != -1) - pr_info("tipar%d: link cable found\n", nr); - else - pr_info("tipar%d: link cable not found\n", nr); - - err = 0; - -out: - return err; -} - -static void -tipar_attach(struct parport *port) -{ - if (tp_count == PP_NO) { - pr_info("tipar: ignoring parallel port (max. %d)\n", PP_NO); - return; - } - - if (!tipar_register(tp_count, port)) - tp_count++; -} - -static void -tipar_detach(struct parport *port) -{ - /* Nothing to do */ -} - -static struct parport_driver tipar_driver = { - .name = "tipar", - .attach = tipar_attach, - .detach = tipar_detach, -}; - -static int __init -tipar_init_module(void) -{ - int err = 0; - - pr_info("tipar: parallel link cable driver, version %s\n", - DRIVER_VERSION); - - if (register_chrdev(TIPAR_MAJOR, "tipar", &tipar_fops)) { - printk(KERN_ERR "tipar: unable to get major %d\n", TIPAR_MAJOR); - err = -EIO; - goto out; - } - - tipar_class = class_create(THIS_MODULE, "ticables"); - if (IS_ERR(tipar_class)) { - err = PTR_ERR(tipar_class); - goto out_chrdev; - } - if (parport_register_driver(&tipar_driver)) { - printk(KERN_ERR "tipar: unable to register with parport\n"); - err = -EIO; - goto out_class; - } - - err = 0; - goto out; - -out_class: - class_destroy(tipar_class); - -out_chrdev: - unregister_chrdev(TIPAR_MAJOR, "tipar"); -out: - return err; -} - -static void __exit -tipar_cleanup_module(void) -{ - unsigned int i; - - /* Unregistering module */ - parport_unregister_driver(&tipar_driver); - - unregister_chrdev(TIPAR_MAJOR, "tipar"); - - for (i = 0; i < PP_NO; i++) { - if (table[i].dev == NULL) - continue; - parport_unregister_device(table[i].dev); - device_destroy(tipar_class, MKDEV(TIPAR_MAJOR, i)); - } - class_destroy(tipar_class); - - pr_info("tipar: module unloaded\n"); -} - -/* --------------------------------------------------------------------- */ - -__setup("tipar=", tipar_setup); -module_init(tipar_init_module); -module_exit(tipar_cleanup_module); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE(DRIVER_LICENSE); - -module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)"); -module_param(delay, int, 0); -MODULE_PARM_DESC(delay, "Inter-bit delay (default=10 microseconds)"); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 5e626b12b97..79581fab82d 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -841,19 +841,25 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) drv_attr = cpufreq_driver->attr; while ((drv_attr) && (*drv_attr)) { ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); - if (ret) + if (ret) { + unlock_policy_rwsem_write(cpu); goto err_out_driver_exit; + } drv_attr++; } if (cpufreq_driver->get){ ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); - if (ret) + if (ret) { + unlock_policy_rwsem_write(cpu); goto err_out_driver_exit; + } } if (cpufreq_driver->target){ ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); - if (ret) + if (ret) { + unlock_policy_rwsem_write(cpu); goto err_out_driver_exit; + } } spin_lock_irqsave(&cpufreq_driver_lock, flags); diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 8a45d0f93e2..1b8312b0200 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -164,7 +164,7 @@ freq_table_get_index(struct cpufreq_stats *stat, unsigned int freq) return -1; } -static void __cpuexit cpufreq_stats_free_table(unsigned int cpu) +static void cpufreq_stats_free_table(unsigned int cpu) { struct cpufreq_stats *stat = cpufreq_stats_table[cpu]; struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index c1c2dcc6fc2..45e7b4666c7 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -173,10 +173,47 @@ static void ioat_set_dest(dma_addr_t addr, tx_to_ioat_desc(tx)->dst = addr; } +/** + * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended + * descriptors to hw + * @chan: DMA channel handle + */ static inline void __ioat1_dma_memcpy_issue_pending( - struct ioat_dma_chan *ioat_chan); + struct ioat_dma_chan *ioat_chan) +{ + ioat_chan->pending = 0; + writeb(IOAT_CHANCMD_APPEND, ioat_chan->reg_base + IOAT1_CHANCMD_OFFSET); +} + +static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan) +{ + struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan); + + if (ioat_chan->pending != 0) { + spin_lock_bh(&ioat_chan->desc_lock); + __ioat1_dma_memcpy_issue_pending(ioat_chan); + spin_unlock_bh(&ioat_chan->desc_lock); + } +} + static inline void __ioat2_dma_memcpy_issue_pending( - struct ioat_dma_chan *ioat_chan); + struct ioat_dma_chan *ioat_chan) +{ + ioat_chan->pending = 0; + writew(ioat_chan->dmacount, + ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET); +} + +static void ioat2_dma_memcpy_issue_pending(struct dma_chan *chan) +{ + struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan); + + if (ioat_chan->pending != 0) { + spin_lock_bh(&ioat_chan->desc_lock); + __ioat2_dma_memcpy_issue_pending(ioat_chan); + spin_unlock_bh(&ioat_chan->desc_lock); + } +} static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx) { @@ -203,7 +240,7 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx) prev = to_ioat_desc(ioat_chan->used_desc.prev); prefetch(prev->hw); do { - copy = min((u32) len, ioat_chan->xfercap); + copy = min_t(size_t, len, ioat_chan->xfercap); new->async_tx.ack = 1; @@ -291,10 +328,12 @@ static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx) orig_ack = first->async_tx.ack; new = first; - /* ioat_chan->desc_lock is still in force in version 2 path */ - + /* + * ioat_chan->desc_lock is still in force in version 2 path + * it gets unlocked at end of this function + */ do { - copy = min((u32) len, ioat_chan->xfercap); + copy = min_t(size_t, len, ioat_chan->xfercap); new->async_tx.ack = 1; @@ -432,7 +471,7 @@ static void ioat2_dma_massage_chan_desc(struct ioat_dma_chan *ioat_chan) static int ioat_dma_alloc_chan_resources(struct dma_chan *chan) { struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan); - struct ioat_desc_sw *desc = NULL; + struct ioat_desc_sw *desc; u16 chanctrl; u32 chanerr; int i; @@ -575,7 +614,7 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan) static struct ioat_desc_sw * ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) { - struct ioat_desc_sw *new = NULL; + struct ioat_desc_sw *new; if (!list_empty(&ioat_chan->free_desc)) { new = to_ioat_desc(ioat_chan->free_desc.next); @@ -583,9 +622,11 @@ ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) } else { /* try to get another desc */ new = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC); - /* will this ever happen? */ - /* TODO add upper limit on these */ - BUG_ON(!new); + if (!new) { + dev_err(&ioat_chan->device->pdev->dev, + "alloc failed\n"); + return NULL; + } } prefetch(new->hw); @@ -595,7 +636,7 @@ ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) static struct ioat_desc_sw * ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) { - struct ioat_desc_sw *new = NULL; + struct ioat_desc_sw *new; /* * used.prev points to where to start processing @@ -609,8 +650,8 @@ ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) if (ioat_chan->used_desc.prev && ioat_chan->used_desc.next == ioat_chan->used_desc.prev->prev) { - struct ioat_desc_sw *desc = NULL; - struct ioat_desc_sw *noop_desc = NULL; + struct ioat_desc_sw *desc; + struct ioat_desc_sw *noop_desc; int i; /* set up the noop descriptor */ @@ -624,10 +665,14 @@ ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) ioat_chan->pending++; ioat_chan->dmacount++; - /* get a few more descriptors */ + /* try to get a few more descriptors */ for (i = 16; i; i--) { desc = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC); - BUG_ON(!desc); + if (!desc) { + dev_err(&ioat_chan->device->pdev->dev, + "alloc failed\n"); + break; + } list_add_tail(&desc->node, ioat_chan->used_desc.next); desc->hw->next @@ -677,10 +722,13 @@ static struct dma_async_tx_descriptor *ioat1_dma_prep_memcpy( spin_lock_bh(&ioat_chan->desc_lock); new = ioat_dma_get_next_descriptor(ioat_chan); - new->len = len; spin_unlock_bh(&ioat_chan->desc_lock); - return new ? &new->async_tx : NULL; + if (new) { + new->len = len; + return &new->async_tx; + } else + return NULL; } static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy( @@ -693,53 +741,17 @@ static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy( spin_lock_bh(&ioat_chan->desc_lock); new = ioat2_dma_get_next_descriptor(ioat_chan); - new->len = len; - - /* leave ioat_chan->desc_lock set in version 2 path */ - return new ? &new->async_tx : NULL; -} + /* + * leave ioat_chan->desc_lock set in ioat 2 path + * it will get unlocked at end of tx_submit + */ -/** - * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended - * descriptors to hw - * @chan: DMA channel handle - */ -static inline void __ioat1_dma_memcpy_issue_pending( - struct ioat_dma_chan *ioat_chan) -{ - ioat_chan->pending = 0; - writeb(IOAT_CHANCMD_APPEND, ioat_chan->reg_base + IOAT1_CHANCMD_OFFSET); -} - -static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan) -{ - struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan); - - if (ioat_chan->pending != 0) { - spin_lock_bh(&ioat_chan->desc_lock); - __ioat1_dma_memcpy_issue_pending(ioat_chan); - spin_unlock_bh(&ioat_chan->desc_lock); - } -} - -static inline void __ioat2_dma_memcpy_issue_pending( - struct ioat_dma_chan *ioat_chan) -{ - ioat_chan->pending = 0; - writew(ioat_chan->dmacount, - ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET); -} - -static void ioat2_dma_memcpy_issue_pending(struct dma_chan *chan) -{ - struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan); - - if (ioat_chan->pending != 0) { - spin_lock_bh(&ioat_chan->desc_lock); - __ioat2_dma_memcpy_issue_pending(ioat_chan); - spin_unlock_bh(&ioat_chan->desc_lock); - } + if (new) { + new->len = len; + return &new->async_tx; + } else + return NULL; } static void ioat_dma_cleanup_tasklet(unsigned long data) @@ -1019,7 +1031,7 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan) static void ioat_dma_test_callback(void *dma_async_param) { printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n", - dma_async_param); + dma_async_param); } /** @@ -1032,7 +1044,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device) u8 *src; u8 *dest; struct dma_chan *dma_chan; - struct dma_async_tx_descriptor *tx = NULL; + struct dma_async_tx_descriptor *tx; dma_addr_t addr; dma_cookie_t cookie; int err = 0; @@ -1351,7 +1363,7 @@ err_completion_pool: err_dma_pool: kfree(device); err_kzalloc: - dev_err(&device->pdev->dev, + dev_err(&pdev->dev, "Intel(R) I/OAT DMA Engine initialization failed\n"); return NULL; } diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h index b668234ef65..f2c7fedbf00 100644 --- a/drivers/dma/ioatdma.h +++ b/drivers/dma/ioatdma.h @@ -76,7 +76,7 @@ struct ioat_dma_chan { dma_cookie_t completed_cookie; unsigned long last_completion; - u32 xfercap; /* XFERCAP register value expanded out */ + size_t xfercap; /* XFERCAP register value expanded out */ spinlock_t cleanup_lock; spinlock_t desc_lock; diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index c9b9081831d..436a855a4c6 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -437,6 +437,21 @@ static void ar_context_run(struct ar_context *ctx) flush_writes(ctx->ohci); } +static struct descriptor * +find_branch_descriptor(struct descriptor *d, int z) +{ + int b, key; + + b = (le16_to_cpu(d->control) & DESCRIPTOR_BRANCH_ALWAYS) >> 2; + key = (le16_to_cpu(d->control) & DESCRIPTOR_KEY_IMMEDIATE) >> 8; + + /* figure out which descriptor the branch address goes in */ + if (z == 2 && (b == 3 || key == 2)) + return d; + else + return d + z - 1; +} + static void context_tasklet(unsigned long data) { struct context *ctx = (struct context *) data; @@ -455,7 +470,7 @@ static void context_tasklet(unsigned long data) address = le32_to_cpu(last->branch_address); z = address & 0xf; d = ctx->buffer + (address - ctx->buffer_bus) / sizeof(*d); - last = (z == 2) ? d : d + z - 1; + last = find_branch_descriptor(d, z); if (!ctx->callback(ctx, d, last)) break; @@ -566,7 +581,7 @@ static void context_append(struct context *ctx, ctx->head_descriptor = d + z + extra; ctx->prev_descriptor->branch_address = cpu_to_le32(d_bus | z); - ctx->prev_descriptor = z == 2 ? d : d + z - 1; + ctx->prev_descriptor = find_branch_descriptor(d, z); dma_sync_single_for_device(ctx->ohci->card.device, ctx->buffer_bus, ctx->buffer_size, DMA_TO_DEVICE); @@ -655,7 +670,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet) driver_data = (struct driver_data *) &d[3]; driver_data->packet = packet; packet->driver_data = driver_data; - + if (packet->payload_length > 0) { payload_bus = dma_map_single(ohci->card.device, packet->payload, @@ -903,7 +918,7 @@ at_context_transmit(struct context *ctx, struct fw_packet *packet) if (retval < 0) packet->callback(packet, &ctx->ohci->card, packet->ack); - + } static void bus_reset_tasklet(unsigned long data) @@ -1431,6 +1446,57 @@ static int handle_ir_dualbuffer_packet(struct context *context, return 1; } +static int handle_ir_packet_per_buffer(struct context *context, + struct descriptor *d, + struct descriptor *last) +{ + struct iso_context *ctx = + container_of(context, struct iso_context, context); + struct descriptor *pd = d + 1; + __le32 *ir_header; + size_t header_length; + void *p, *end; + int i, z; + + if (pd->res_count == pd->req_count) + /* Descriptor(s) not done yet, stop iteration */ + return 0; + + header_length = le16_to_cpu(d->req_count); + + i = ctx->header_length; + z = le32_to_cpu(pd->branch_address) & 0xf; + p = d + z; + end = p + header_length; + + while (p < end && i + ctx->base.header_size <= PAGE_SIZE) { + /* + * The iso header is byteswapped to little endian by + * the controller, but the remaining header quadlets + * are big endian. We want to present all the headers + * as big endian, so we have to swap the first quadlet. + */ + *(u32 *) (ctx->header + i) = __swab32(*(u32 *) (p + 4)); + memcpy(ctx->header + i + 4, p + 8, ctx->base.header_size - 4); + i += ctx->base.header_size; + p += ctx->base.header_size + 4; + } + + ctx->header_length = i; + + if (le16_to_cpu(pd->control) & DESCRIPTOR_IRQ_ALWAYS) { + ir_header = (__le32 *) (d + z); + ctx->base.callback(&ctx->base, + le32_to_cpu(ir_header[0]) & 0xffff, + ctx->header_length, ctx->header, + ctx->base.callback_data); + ctx->header_length = 0; + } + + + return 1; +} + static int handle_it_packet(struct context *context, struct descriptor *d, struct descriptor *last) @@ -1466,14 +1532,12 @@ ohci_allocate_iso_context(struct fw_card *card, int type, size_t header_size) } else { mask = &ohci->ir_context_mask; list = ohci->ir_context_list; - callback = handle_ir_dualbuffer_packet; + if (ohci->version >= OHCI_VERSION_1_1) + callback = handle_ir_dualbuffer_packet; + else + callback = handle_ir_packet_per_buffer; } - /* FIXME: We need a fallback for pre 1.1 OHCI. */ - if (callback == handle_ir_dualbuffer_packet && - ohci->version < OHCI_VERSION_1_1) - return ERR_PTR(-ENOSYS); - spin_lock_irqsave(&ohci->lock, flags); index = ffs(*mask) - 1; if (index >= 0) @@ -1532,7 +1596,9 @@ static int ohci_start_iso(struct fw_iso_context *base, context_run(&ctx->context, match); } else { index = ctx - ohci->ir_context_list; - control = IR_CONTEXT_DUAL_BUFFER_MODE | IR_CONTEXT_ISOCH_HEADER; + control = IR_CONTEXT_ISOCH_HEADER; + if (ohci->version >= OHCI_VERSION_1_1) + control |= IR_CONTEXT_DUAL_BUFFER_MODE; match = (tags << 28) | (sync << 8) | ctx->base.channel; if (cycle >= 0) { match |= (cycle & 0x07fff) << 12; @@ -1738,7 +1804,6 @@ ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base, offset = payload & ~PAGE_MASK; rest = p->payload_length; - /* FIXME: OHCI 1.0 doesn't support dual buffer receive */ /* FIXME: make packet-per-buffer/dual-buffer a context option */ while (rest > 0) { d = context_get_descriptors(&ctx->context, @@ -1777,6 +1842,81 @@ ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base, } static int +ohci_queue_iso_receive_packet_per_buffer(struct fw_iso_context *base, + struct fw_iso_packet *packet, + struct fw_iso_buffer *buffer, + unsigned long payload) +{ + struct iso_context *ctx = container_of(base, struct iso_context, base); + struct descriptor *d = NULL, *pd = NULL; + struct fw_iso_packet *p; + dma_addr_t d_bus, page_bus; + u32 z, header_z, rest; + int i, page, offset, packet_count, header_size; + + if (packet->skip) { + d = context_get_descriptors(&ctx->context, 1, &d_bus); + if (d == NULL) + return -ENOMEM; + + d->control = cpu_to_le16(DESCRIPTOR_STATUS | + DESCRIPTOR_INPUT_LAST | + DESCRIPTOR_BRANCH_ALWAYS | + DESCRIPTOR_WAIT); + context_append(&ctx->context, d, 1, 0); + } + + /* one descriptor for header, one for payload */ + /* FIXME: handle cases where we need multiple desc. for payload */ + z = 2; + p = packet; + + /* + * The OHCI controller puts the status word in the + * buffer too, so we need 4 extra bytes per packet. + */ + packet_count = p->header_length / ctx->base.header_size; + header_size = packet_count * (ctx->base.header_size + 4); + + /* Get header size in number of descriptors. */ + header_z = DIV_ROUND_UP(header_size, sizeof(*d)); + page = payload >> PAGE_SHIFT; + offset = payload & ~PAGE_MASK; + rest = p->payload_length; + + for (i = 0; i < packet_count; i++) { + /* d points to the header descriptor */ + d = context_get_descriptors(&ctx->context, + z + header_z, &d_bus); + if (d == NULL) + return -ENOMEM; + + d->control = cpu_to_le16(DESCRIPTOR_INPUT_MORE); + d->req_count = cpu_to_le16(header_size); + d->res_count = d->req_count; + d->data_address = cpu_to_le32(d_bus + (z * sizeof(*d))); + + /* pd points to the payload descriptor */ + pd = d + 1; + pd->control = cpu_to_le16(DESCRIPTOR_STATUS | + DESCRIPTOR_INPUT_LAST | + DESCRIPTOR_BRANCH_ALWAYS); + if (p->interrupt) + pd->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS); + + pd->req_count = cpu_to_le16(rest); + pd->res_count = pd->req_count; + + page_bus = page_private(buffer->pages[page]); + pd->data_address = cpu_to_le32(page_bus + offset); + + context_append(&ctx->context, d, z, header_z); + } + + return 0; +} + +static int ohci_queue_iso(struct fw_iso_context *base, struct fw_iso_packet *packet, struct fw_iso_buffer *buffer, @@ -1790,8 +1930,9 @@ ohci_queue_iso(struct fw_iso_context *base, return ohci_queue_iso_receive_dualbuffer(base, packet, buffer, payload); else - /* FIXME: Implement fallback for OHCI 1.0 controllers. */ - return -ENOSYS; + return ohci_queue_iso_receive_packet_per_buffer(base, packet, + buffer, + payload); } static const struct fw_card_driver ohci_driver = { @@ -1911,12 +2052,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) ohci->version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff; fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n", dev->dev.bus_id, ohci->version >> 16, ohci->version & 0xff); - if (ohci->version < OHCI_VERSION_1_1) { - fw_notify(" Isochronous I/O is not yet implemented for " - "OHCI 1.0 chips.\n"); - fw_notify(" Cameras, audio devices etc. won't work on " - "this controller with this driver version.\n"); - } return 0; fail_self_id: diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index bd7aaff3524..67679882ebe 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -404,7 +404,7 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) DAVINCI_I2C_STR_REG, w); } else - dev_err(dev->dev, "RDR IRQ while no" + dev_err(dev->dev, "RDR IRQ while no " "data requested\n"); break; @@ -423,7 +423,7 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) DAVINCI_I2C_IMR_REG, w); } else - dev_err(dev->dev, "TDR IRQ while no data to" + dev_err(dev->dev, "TDR IRQ while no data to " "send\n"); break; diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 44e1cd21bb0..3ca19fc234f 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -140,6 +140,7 @@ static int __init i2c_gpio_probe(struct platform_device *pdev) adap->owner = THIS_MODULE; snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id); adap->algo_data = bit_data; + adap->class = I2C_CLASS_HWMON; adap->dev.parent = &pdev->dev; /* diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 89a30028ddb..cb55cf2ba1e 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -203,7 +203,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) & OMAP_I2C_SYSS_RDONE)) { if (time_after(jiffies, timeout)) { - dev_warn(dev->dev, "timeout waiting" + dev_warn(dev->dev, "timeout waiting " "for controller reset\n"); return -ETIMEDOUT; } @@ -483,7 +483,7 @@ omap_i2c_isr(int this_irq, void *dev_id) dev->buf_len--; } } else - dev_err(dev->dev, "RRDY IRQ while no data" + dev_err(dev->dev, "RRDY IRQ while no data " "requested\n"); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); continue; @@ -498,7 +498,7 @@ omap_i2c_isr(int this_irq, void *dev_id) dev->buf_len--; } } else - dev_err(dev->dev, "XRDY IRQ while no" + dev_err(dev->dev, "XRDY IRQ while no " "data to send\n"); omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index fe04e46991a..b767603a07b 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -26,7 +26,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <linux/usb.h> #include <linux/usb/otg.h> #include <linux/i2c.h> diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 45b22282f14..fb06555708a 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -390,7 +390,7 @@ config IDEPCI_PCIBUS_ORDER # TODO: split it on per host driver config options (or module parameters) config BLK_DEV_OFFBOARD - bool "Boot off-board chipsets first support" + bool "Boot off-board chipsets first support (DEPRECATED)" depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT34X || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001) help Normally, IDE controllers built into the motherboard (on-board @@ -410,6 +410,10 @@ config BLK_DEV_OFFBOARD Note that, if you do this, the order of the hd* devices will be rearranged which may require modification of fstab and other files. + Please also note that this method of assuring stable naming of + IDE devices is unreliable and use other means for achieving it + (i.e. udev). + If in doubt, say N. config BLK_DEV_GENERIC diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 57a5f63d6ae..92ac658dac3 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1650,31 +1650,6 @@ static int cdrom_write_check_ireason(ide_drive_t *drive, int len, int ireason) return 1; } -static void post_transform_command(struct request *req) -{ - u8 *c = req->cmd; - char *ibuf; - - if (!blk_pc_request(req)) - return; - - if (req->bio) - ibuf = bio_data(req->bio); - else - ibuf = req->data; - - if (!ibuf) - return; - - /* - * set ansi-revision and response data as atapi - */ - if (c[0] == GPCMD_INQUIRY) { - ibuf[2] |= 2; - ibuf[3] = (ibuf[3] & 0xf0) | 2; - } -} - typedef void (xfer_func_t)(ide_drive_t *, void *, u32); /* @@ -1810,9 +1785,6 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) return ide_started; end_request: - if (!rq->data_len) - post_transform_command(rq); - spin_lock_irqsave(&ide_lock, flags); blkdev_dequeue_request(rq); end_that_request_last(rq, 1); @@ -3049,12 +3021,7 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) else printk(" drive"); - printk(", %dkB Cache", be16_to_cpu(cap.buffer_size)); - - if (drive->using_dma) - ide_dma_verbose(drive); - - printk("\n"); + printk(KERN_CONT ", %dkB Cache\n", be16_to_cpu(cap.buffer_size)); return nslots; } diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 00123d99527..b1781908e1f 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -13,32 +13,6 @@ * and Andre Hedrick <andre@linux-ide.org> * * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. - * - * Version 1.00 move disk only code from ide.c to ide-disk.c - * support optional byte-swapping of all data - * Version 1.01 fix previous byte-swapping code - * Version 1.02 remove ", LBA" from drive identification msgs - * Version 1.03 fix display of id->buf_size for big-endian - * Version 1.04 add /proc configurable settings and S.M.A.R.T support - * Version 1.05 add capacity support for ATA3 >= 8GB - * Version 1.06 get boot-up messages to show full cyl count - * Version 1.07 disable door-locking if it fails - * Version 1.08 fixed CHS/LBA translations for ATA4 > 8GB, - * process of adding new ATA4 compliance. - * fixed problems in allowing fdisk to see - * the entire disk. - * Version 1.09 added increment of rq->sector in ide_multwrite - * added UDMA 3/4 reporting - * Version 1.10 request queue changes, Ultra DMA 100 - * Version 1.11 added 48-bit lba - * Version 1.12 adding taskfile io access method - * Version 1.13 added standby and flush-cache for notifier - * Version 1.14 added acoustic-wcache - * Version 1.15 convert all calls to ide_raw_taskfile - * since args will return register content. - * Version 1.16 added suspend-resume-checkpower - * Version 1.17 do flush on standby, do flush on ATA < ATA6 - * fix wcache setup. */ #define IDEDISK_VERSION "1.18" @@ -961,11 +935,8 @@ static void idedisk_setup (ide_drive_t *drive) if (id->buf_size) printk (" w/%dKiB Cache", id->buf_size/2); - printk(", CHS=%d/%d/%d", - drive->bios_cyl, drive->bios_head, drive->bios_sect); - if (drive->using_dma) - ide_dma_verbose(drive); - printk("\n"); + printk(KERN_CONT ", CHS=%d/%d/%d\n", + drive->bios_cyl, drive->bios_head, drive->bios_sect); /* write cache enabled? */ if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5))) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 0d795a1678c..4703837bf1f 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -611,12 +611,6 @@ static int __ide_dma_test_irq(ide_drive_t *drive) ide_hwif_t *hwif = HWIF(drive); u8 dma_stat = hwif->INB(hwif->dma_status); -#if 0 /* do not set unless you know what you are doing */ - if (dma_stat & 4) { - u8 stat = hwif->INB(IDE_STATUS_REG); - hwif->OUTB(hwif->dma_status, dma_stat & 0xE4); - } -#endif /* return 1 if INTR asserted */ if ((dma_stat & 4) == 4) return 1; @@ -753,10 +747,12 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode) mode = XFER_MW_DMA_1; } - printk(KERN_DEBUG "%s: %s mode selected\n", drive->name, + mode = min(mode, req_mode); + + printk(KERN_INFO "%s: %s mode selected\n", drive->name, mode ? ide_xfer_verbose(mode) : "no DMA"); - return min(mode, req_mode); + return mode; } EXPORT_SYMBOL_GPL(ide_find_dma_mode); @@ -772,6 +768,9 @@ static int ide_tune_dma(ide_drive_t *drive) if (__ide_dma_bad_drive(drive)) return 0; + if (ide_id_dma_bug(drive)) + return 0; + if (drive->hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) return config_drive_for_dma(drive); @@ -806,58 +805,23 @@ static int ide_dma_check(ide_drive_t *drive) return vdma ? 0 : -1; } -void ide_dma_verbose(ide_drive_t *drive) +int ide_id_dma_bug(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; - ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; if (id->field_valid & 4) { if ((id->dma_ultra >> 8) && (id->dma_mword >> 8)) - goto bug_dma_off; - if (id->dma_ultra & ((id->dma_ultra >> 8) & hwif->ultra_mask)) { - if (((id->dma_ultra >> 11) & 0x1F) && - eighty_ninty_three(drive)) { - if ((id->dma_ultra >> 15) & 1) { - printk(", UDMA(mode 7)"); - } else if ((id->dma_ultra >> 14) & 1) { - printk(", UDMA(133)"); - } else if ((id->dma_ultra >> 13) & 1) { - printk(", UDMA(100)"); - } else if ((id->dma_ultra >> 12) & 1) { - printk(", UDMA(66)"); - } else if ((id->dma_ultra >> 11) & 1) { - printk(", UDMA(44)"); - } else - goto mode_two; - } else { - mode_two: - if ((id->dma_ultra >> 10) & 1) { - printk(", UDMA(33)"); - } else if ((id->dma_ultra >> 9) & 1) { - printk(", UDMA(25)"); - } else if ((id->dma_ultra >> 8) & 1) { - printk(", UDMA(16)"); - } - } - } else { - printk(", (U)DMA"); /* Can be BIOS-enabled! */ - } + goto err_out; } else if (id->field_valid & 2) { if ((id->dma_mword >> 8) && (id->dma_1word >> 8)) - goto bug_dma_off; - printk(", DMA"); - } else if (id->field_valid & 1) { - goto bug_dma_off; + goto err_out; } - return; -bug_dma_off: - printk(", BUG DMA OFF"); - hwif->dma_off_quietly(drive); - return; + return 0; +err_out: + printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name); + return 1; } -EXPORT_SYMBOL(ide_dma_verbose); - int ide_set_dma(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index db22d1ff4e5..bef781fec50 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -970,7 +970,8 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) if (rc) printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name); SELECT_DRIVE(drive); - HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]); + if (IDE_CONTROL_REG) + HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); rc = ide_wait_not_busy(HWIF(drive), 100000); if (rc) printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 5c3256180ae..cef405ddaf0 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -748,6 +748,9 @@ int ide_driveid_update(ide_drive_t *drive) drive->id->dma_1word = id->dma_1word; /* anything more ? */ kfree(id); + + if (drive->using_dma && ide_id_dma_bug(drive)) + ide_dma_off(drive); } return 1; diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 1609b8604f5..062d3bcb247 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -29,41 +29,44 @@ * Add common non I/O op stuff here. Make sure it has proper * kernel-doc function headers or your patch will be rejected */ - + +static const char *udma_str[] = + { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", + "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; +static const char *mwdma_str[] = + { "MWDMA0", "MWDMA1", "MWDMA2" }; +static const char *swdma_str[] = + { "SWDMA0", "SWDMA1", "SWDMA2" }; +static const char *pio_str[] = + { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" }; /** * ide_xfer_verbose - return IDE mode names - * @xfer_rate: rate to name + * @mode: transfer mode * * Returns a constant string giving the name of the mode * requested. */ -char *ide_xfer_verbose (u8 xfer_rate) +const char *ide_xfer_verbose(u8 mode) { - switch(xfer_rate) { - case XFER_UDMA_7: return("UDMA 7"); - case XFER_UDMA_6: return("UDMA 6"); - case XFER_UDMA_5: return("UDMA 5"); - case XFER_UDMA_4: return("UDMA 4"); - case XFER_UDMA_3: return("UDMA 3"); - case XFER_UDMA_2: return("UDMA 2"); - case XFER_UDMA_1: return("UDMA 1"); - case XFER_UDMA_0: return("UDMA 0"); - case XFER_MW_DMA_2: return("MW DMA 2"); - case XFER_MW_DMA_1: return("MW DMA 1"); - case XFER_MW_DMA_0: return("MW DMA 0"); - case XFER_SW_DMA_2: return("SW DMA 2"); - case XFER_SW_DMA_1: return("SW DMA 1"); - case XFER_SW_DMA_0: return("SW DMA 0"); - case XFER_PIO_4: return("PIO 4"); - case XFER_PIO_3: return("PIO 3"); - case XFER_PIO_2: return("PIO 2"); - case XFER_PIO_1: return("PIO 1"); - case XFER_PIO_0: return("PIO 0"); - case XFER_PIO_SLOW: return("PIO SLOW"); - default: return("XFER ERROR"); - } + const char *s; + u8 i = mode & 0xf; + + if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7) + s = udma_str[i]; + else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2) + s = mwdma_str[i]; + else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2) + s = swdma_str[i]; + else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5) + s = pio_str[i & 0x7]; + else if (mode == XFER_PIO_SLOW) + s = "PIO SLOW"; + else + s = "XFER ERROR"; + + return s; } EXPORT_SYMBOL(ide_xfer_verbose); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index ee848c70599..2994523be7b 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -13,22 +13,8 @@ * * This is the IDE probe module, as evolved from hd.c and ide.c. * - * Version 1.00 move drive probing code from ide.c to ide-probe.c - * Version 1.01 fix compilation problem for m68k - * Version 1.02 increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot - * by Andrea Arcangeli - * Version 1.03 fix for (hwif->chipset == ide_4drives) - * Version 1.04 fixed buggy treatments of known flash memory cards - * - * Version 1.05 fix for (hwif->chipset == ide_pdc4030) - * added ide6/7/8/9 - * allowed for secondary flash card to be detectable - * with new flag : drive->ata_flash : 1; - * Version 1.06 stream line request queue and prep for cascade project. - * Version 1.07 max_sect <= 255; slower disks would get behind and - * then fall over when they get to 256. Paul G. - * Version 1.10 Update set for new IDE. drive->id is now always - * valid after probe time even with noprobe + * -- increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot + * by Andrea Arcangeli */ #include <linux/module.h> @@ -667,7 +653,8 @@ static int wait_hwif_ready(ide_hwif_t *hwif) /* Ignore disks that we will not probe for later. */ if (!drive->noprobe || drive->present) { SELECT_DRIVE(drive); - hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); + if (IDE_CONTROL_REG) + hwif->OUTB(drive->ctl, IDE_CONTROL_REG); mdelay(2); rc = ide_wait_not_busy(hwif, 35000); if (rc) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 674a65c1a13..54943da6e4e 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -800,11 +800,17 @@ int set_io_32bit(ide_drive_t *drive, int arg) if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1)) return -EINVAL; + if (ide_spin_wait_hwgroup(drive)) + return -EBUSY; + drive->io_32bit = arg; #ifdef CONFIG_BLK_DEV_DTC2278 if (HWIF(drive)->chipset == ide_dtc2278) HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg; #endif /* CONFIG_BLK_DEV_DTC2278 */ + + spin_unlock_irq(&ide_lock); + return 0; } @@ -1670,10 +1676,34 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "ide:m-%s\n", media_string(drive)); } +static ssize_t model_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + ide_drive_t *drive = to_ide_device(dev); + return sprintf(buf, "%s\n", drive->id->model); +} + +static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + ide_drive_t *drive = to_ide_device(dev); + return sprintf(buf, "%s\n", drive->id->fw_rev); +} + +static ssize_t serial_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + ide_drive_t *drive = to_ide_device(dev); + return sprintf(buf, "%s\n", drive->id->serial_no); +} + static struct device_attribute ide_dev_attrs[] = { __ATTR_RO(media), __ATTR_RO(drivename), __ATTR_RO(modalias), + __ATTR_RO(model), + __ATTR_RO(firmware), + __ATTR(serial, 0400, serial_show, NULL), __ATTR_NULL }; diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 5682895d36d..9fce25bdec8 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.21 Oct 23, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.22 Dec 4, 2007 * * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -310,6 +310,8 @@ static u32 twenty_five_base_hpt36x[] = { /* XFER_PIO_0 */ 0xc0d08585 }; +#if 0 +/* These are the timing tables from the HighPoint open source drivers... */ static u32 thirty_three_base_hpt37x[] = { /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */ /* XFER_UDMA_5 */ 0x12446231, @@ -369,6 +371,73 @@ static u32 sixty_six_base_hpt37x[] = { /* XFER_PIO_1 */ 0x0d029d26, /* XFER_PIO_0 */ 0x0d029d5e }; +#else +/* + * The following are the new timing tables with PIO mode data/taskfile transfer + * overclocking fixed... + */ + +/* This table is taken from the HPT370 data manual rev. 1.02 */ +static u32 thirty_three_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x16455031, /* 0x16655031 ?? */ + /* XFER_UDMA_5 */ 0x16455031, + /* XFER_UDMA_4 */ 0x16455031, + /* XFER_UDMA_3 */ 0x166d5031, + /* XFER_UDMA_2 */ 0x16495031, + /* XFER_UDMA_1 */ 0x164d5033, + /* XFER_UDMA_0 */ 0x16515097, + + /* XFER_MW_DMA_2 */ 0x26515031, + /* XFER_MW_DMA_1 */ 0x26515033, + /* XFER_MW_DMA_0 */ 0x26515097, + + /* XFER_PIO_4 */ 0x06515021, + /* XFER_PIO_3 */ 0x06515022, + /* XFER_PIO_2 */ 0x06515033, + /* XFER_PIO_1 */ 0x06915065, + /* XFER_PIO_0 */ 0x06d1508a +}; + +static u32 fifty_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x1a861842, + /* XFER_UDMA_5 */ 0x1a861842, + /* XFER_UDMA_4 */ 0x1aae1842, + /* XFER_UDMA_3 */ 0x1a8e1842, + /* XFER_UDMA_2 */ 0x1a0e1842, + /* XFER_UDMA_1 */ 0x1a161854, + /* XFER_UDMA_0 */ 0x1a1a18ea, + + /* XFER_MW_DMA_2 */ 0x2a821842, + /* XFER_MW_DMA_1 */ 0x2a821854, + /* XFER_MW_DMA_0 */ 0x2a8218ea, + + /* XFER_PIO_4 */ 0x0a821842, + /* XFER_PIO_3 */ 0x0a821843, + /* XFER_PIO_2 */ 0x0a821855, + /* XFER_PIO_1 */ 0x0ac218a8, + /* XFER_PIO_0 */ 0x0b02190c +}; + +static u32 sixty_six_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x1c86fe62, + /* XFER_UDMA_5 */ 0x1caefe62, /* 0x1c8afe62 */ + /* XFER_UDMA_4 */ 0x1c8afe62, + /* XFER_UDMA_3 */ 0x1c8efe62, + /* XFER_UDMA_2 */ 0x1c92fe62, + /* XFER_UDMA_1 */ 0x1c9afe62, + /* XFER_UDMA_0 */ 0x1c82fe62, + + /* XFER_MW_DMA_2 */ 0x2c82fe62, + /* XFER_MW_DMA_1 */ 0x2c82fe66, + /* XFER_MW_DMA_0 */ 0x2c82ff2e, + + /* XFER_PIO_4 */ 0x0c82fe62, + /* XFER_PIO_3 */ 0x0c82fe84, + /* XFER_PIO_2 */ 0x0c82fea6, + /* XFER_PIO_1 */ 0x0d02ff26, + /* XFER_PIO_0 */ 0x0d42ff7f +}; +#endif #define HPT366_DEBUG_DRIVE_INFO 0 #define HPT371_ALLOW_ATA133_6 1 diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 4234efeba60..2b4f44e45a1 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -482,8 +482,9 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) { struct pci_dev *dev2; - dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 2, + dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 1, PCI_FUNC(dev->devfn))); + if (dev2 && dev2->vendor == dev->vendor && dev2->device == dev->device) { diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 25fd0905322..d2cd5a3d38f 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -704,7 +704,7 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_devices); /* * Module interfaces */ - + static int pre_init = 1; /* Before first ordered IDE scan */ static LIST_HEAD(ide_pci_drivers); @@ -714,7 +714,7 @@ static LIST_HEAD(ide_pci_drivers); * @module: owner module of the driver * * Registers a driver with the IDE layer. The IDE layer arranges that - * boot time setup is done in the expected device order and then + * boot time setup is done in the expected device order and then * hands the controllers off to the core PCI code to do the rest of * the work. * @@ -724,13 +724,12 @@ static LIST_HEAD(ide_pci_drivers); int __ide_pci_register_driver(struct pci_driver *driver, struct module *module, const char *mod_name) { - if(!pre_init) + if (!pre_init) return __pci_register_driver(driver, module, mod_name); driver->driver.owner = module; list_add_tail(&driver->node, &ide_pci_drivers); return 0; } - EXPORT_SYMBOL_GPL(__ide_pci_register_driver); /** @@ -741,17 +740,18 @@ EXPORT_SYMBOL_GPL(__ide_pci_register_driver); * This is only used during boot up to get the ordering correct. After * boot up the pci layer takes over the job. */ - + static int __init ide_scan_pcidev(struct pci_dev *dev) { struct list_head *l; struct pci_driver *d; - + list_for_each(l, &ide_pci_drivers) { d = list_entry(l, struct pci_driver, node); if (d->id_table) { - const struct pci_device_id *id = pci_match_id(d->id_table, - dev); + const struct pci_device_id *id = + pci_match_id(d->id_table, dev); + if (id != NULL && d->probe(dev, id) >= 0) { dev->driver = d; pci_dev_get(dev); @@ -779,13 +779,13 @@ void __init ide_scan_pcibus (int scan_direction) pre_init = 0; if (!scan_direction) - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev))) ide_scan_pcidev(dev); else - while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev)) - != NULL) + while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, + dev))) ide_scan_pcidev(dev); - + /* * Hand the drivers over to the PCI layer now we * are post init. @@ -794,9 +794,10 @@ void __init ide_scan_pcibus (int scan_direction) list_for_each_safe(l, n, &ide_pci_drivers) { list_del(l); d = list_entry(l, struct pci_driver, node); - if (__pci_register_driver(d, d->driver.owner, d->driver.mod_name)) - printk(KERN_ERR "%s: failed to register driver for %s\n", - __FUNCTION__, d->driver.mod_name); + if (__pci_register_driver(d, d->driver.owner, + d->driver.mod_name)) + printk(KERN_ERR "%s: failed to register %s driver\n", + __FUNCTION__, d->driver.mod_name); } } #endif diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 87f12d4312a..74d2b72a11d 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -322,6 +322,7 @@ extern int ehca_static_rate; extern int ehca_port_act_time; extern int ehca_use_hp_mr; extern int ehca_scaling_code; +extern int ehca_lock_hcalls; struct ipzu_queue_resp { u32 qe_size; /* queue entry size */ diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 90d4334179b..6a56d86a295 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -43,13 +43,14 @@ #ifdef CONFIG_PPC_64K_PAGES #include <linux/slab.h> #endif + #include "ehca_classes.h" #include "ehca_iverbs.h" #include "ehca_mrmw.h" #include "ehca_tools.h" #include "hcp_if.h" -#define HCAD_VERSION "0024" +#define HCAD_VERSION "0025" MODULE_LICENSE("Dual BSD/GPL"); MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>"); @@ -66,6 +67,7 @@ int ehca_poll_all_eqs = 1; int ehca_static_rate = -1; int ehca_scaling_code = 0; int ehca_mr_largepage = 1; +int ehca_lock_hcalls = -1; module_param_named(open_aqp1, ehca_open_aqp1, int, S_IRUGO); module_param_named(debug_level, ehca_debug_level, int, S_IRUGO); @@ -77,6 +79,7 @@ module_param_named(poll_all_eqs, ehca_poll_all_eqs, int, S_IRUGO); module_param_named(static_rate, ehca_static_rate, int, S_IRUGO); module_param_named(scaling_code, ehca_scaling_code, int, S_IRUGO); module_param_named(mr_largepage, ehca_mr_largepage, int, S_IRUGO); +module_param_named(lock_hcalls, ehca_lock_hcalls, bool, S_IRUGO); MODULE_PARM_DESC(open_aqp1, "AQP1 on startup (0: no (default), 1: yes)"); @@ -102,6 +105,9 @@ MODULE_PARM_DESC(scaling_code, MODULE_PARM_DESC(mr_largepage, "use large page for MR (0: use PAGE_SIZE (default), " "1: use large page depending on MR size"); +MODULE_PARM_DESC(lock_hcalls, + "serialize all hCalls made by the driver " + "(default: autodetect)"); DEFINE_RWLOCK(ehca_qp_idr_lock); DEFINE_RWLOCK(ehca_cq_idr_lock); @@ -258,6 +264,7 @@ static struct cap_descr { { HCA_CAP_UD_LL_QP, "HCA_CAP_UD_LL_QP" }, { HCA_CAP_RESIZE_MR, "HCA_CAP_RESIZE_MR" }, { HCA_CAP_MINI_QP, "HCA_CAP_MINI_QP" }, + { HCA_CAP_H_ALLOC_RES_SYNC, "HCA_CAP_H_ALLOC_RES_SYNC" }, }; static int ehca_sense_attributes(struct ehca_shca *shca) @@ -333,6 +340,12 @@ static int ehca_sense_attributes(struct ehca_shca *shca) if (EHCA_BMASK_GET(hca_cap_descr[i].mask, shca->hca_cap)) ehca_gen_dbg(" %s", hca_cap_descr[i].descr); + /* Autodetect hCall locking -- the "H_ALLOC_RESOURCE synced" flag is + * a firmware property, so it's valid across all adapters + */ + if (ehca_lock_hcalls == -1) + ehca_lock_hcalls = !(shca->hca_cap & HCA_CAP_H_ALLOC_RES_SYNC); + /* translate supported MR page sizes; always support 4K */ shca->hca_cap_mr_pgsize = EHCA_PAGESIZE; if (ehca_mr_largepage) { /* support extra sizes only if enabled */ diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index dd126681fed..eff5fb55604 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -838,7 +838,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, /* copy back return values */ srq_init_attr->attr.max_wr = qp_init_attr.cap.max_recv_wr; - srq_init_attr->attr.max_sge = qp_init_attr.cap.max_recv_sge; + srq_init_attr->attr.max_sge = 3; /* drive SRQ into RTR state */ mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL); @@ -1750,7 +1750,7 @@ int ehca_query_srq(struct ib_srq *srq, struct ib_srq_attr *srq_attr) } srq_attr->max_wr = qpcb->max_nr_outst_recv_wr - 1; - srq_attr->max_sge = qpcb->actual_nr_sges_in_rq_wqe; + srq_attr->max_sge = 3; srq_attr->srq_limit = EHCA_BMASK_GET( MQPCB_CURR_SRQ_LIMIT, qpcb->curr_srq_limit); diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c index c16a21374bb..7029aa65375 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.c +++ b/drivers/infiniband/hw/ehca/hcp_if.c @@ -120,26 +120,21 @@ static long ehca_plpar_hcall_norets(unsigned long opcode, unsigned long arg7) { long ret; - int i, sleep_msecs, do_lock; - unsigned long flags; + int i, sleep_msecs; + unsigned long flags = 0; ehca_gen_dbg("opcode=%lx " HCALL7_REGS_FORMAT, opcode, arg1, arg2, arg3, arg4, arg5, arg6, arg7); - /* lock H_FREE_RESOURCE(MR) against itself and H_ALLOC_RESOURCE(MR) */ - if ((opcode == H_FREE_RESOURCE) && (arg7 == 5)) { - arg7 = 0; /* better not upset firmware */ - do_lock = 1; - } - for (i = 0; i < 5; i++) { - if (do_lock) + /* serialize hCalls to work around firmware issue */ + if (ehca_lock_hcalls) spin_lock_irqsave(&hcall_lock, flags); ret = plpar_hcall_norets(opcode, arg1, arg2, arg3, arg4, arg5, arg6, arg7); - if (do_lock) + if (ehca_lock_hcalls) spin_unlock_irqrestore(&hcall_lock, flags); if (H_IS_LONG_BUSY(ret)) { @@ -174,24 +169,22 @@ static long ehca_plpar_hcall9(unsigned long opcode, unsigned long arg9) { long ret; - int i, sleep_msecs, do_lock; + int i, sleep_msecs; unsigned long flags = 0; ehca_gen_dbg("INPUT -- opcode=%lx " HCALL9_REGS_FORMAT, opcode, arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9); - /* lock H_ALLOC_RESOURCE(MR) against itself and H_FREE_RESOURCE(MR) */ - do_lock = ((opcode == H_ALLOC_RESOURCE) && (arg2 == 5)); - for (i = 0; i < 5; i++) { - if (do_lock) + /* serialize hCalls to work around firmware issue */ + if (ehca_lock_hcalls) spin_lock_irqsave(&hcall_lock, flags); ret = plpar_hcall9(opcode, outs, arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9); - if (do_lock) + if (ehca_lock_hcalls) spin_unlock_irqrestore(&hcall_lock, flags); if (H_IS_LONG_BUSY(ret)) { @@ -821,7 +814,7 @@ u64 hipz_h_free_resource_mr(const struct ipz_adapter_handle adapter_handle, return ehca_plpar_hcall_norets(H_FREE_RESOURCE, adapter_handle.handle, /* r4 */ mr->ipz_mr_handle.handle, /* r5 */ - 0, 0, 0, 0, 5); + 0, 0, 0, 0, 0); } u64 hipz_h_reregister_pmr(const struct ipz_adapter_handle adapter_handle, diff --git a/drivers/infiniband/hw/ehca/hipz_hw.h b/drivers/infiniband/hw/ehca/hipz_hw.h index 485b8400359..bf996c7acc4 100644 --- a/drivers/infiniband/hw/ehca/hipz_hw.h +++ b/drivers/infiniband/hw/ehca/hipz_hw.h @@ -378,6 +378,7 @@ struct hipz_query_hca { #define HCA_CAP_UD_LL_QP EHCA_BMASK_IBM(16, 16) #define HCA_CAP_RESIZE_MR EHCA_BMASK_IBM(17, 17) #define HCA_CAP_MINI_QP EHCA_BMASK_IBM(18, 18) +#define HCA_CAP_H_ALLOC_RES_SYNC EHCA_BMASK_IBM(19, 19) /* query port response block */ struct hipz_query_port { diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 9b6fbf044fd..3fa7c77d9bd 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -269,7 +269,7 @@ config DM_MULTIPATH_RDAC config DM_MULTIPATH_HP tristate "HP MSA multipath support (EXPERIMENTAL)" - depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL + depends on DM_MULTIPATH && BLK_DEV_DM && SCSI && EXPERIMENTAL ---help--- Multipath support for HP MSA (Active/Passive) series hardware. diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 28c6ae095c5..6b66ee46b87 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -398,7 +398,8 @@ static struct bio *crypt_alloc_buffer(struct dm_crypt_io *io, unsigned size) struct bio *clone; unsigned int nr_iovecs = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; gfp_t gfp_mask = GFP_NOIO | __GFP_HIGHMEM; - unsigned int i; + unsigned i, len; + struct page *page; clone = bio_alloc_bioset(GFP_NOIO, nr_iovecs, cc->bs); if (!clone) @@ -407,10 +408,8 @@ static struct bio *crypt_alloc_buffer(struct dm_crypt_io *io, unsigned size) clone_init(io, clone); for (i = 0; i < nr_iovecs; i++) { - struct bio_vec *bv = bio_iovec_idx(clone, i); - - bv->bv_page = mempool_alloc(cc->page_pool, gfp_mask); - if (!bv->bv_page) + page = mempool_alloc(cc->page_pool, gfp_mask); + if (!page) break; /* @@ -421,15 +420,14 @@ static struct bio *crypt_alloc_buffer(struct dm_crypt_io *io, unsigned size) if (i == (MIN_BIO_PAGES - 1)) gfp_mask = (gfp_mask | __GFP_NOWARN) & ~__GFP_WAIT; - bv->bv_offset = 0; - if (size > PAGE_SIZE) - bv->bv_len = PAGE_SIZE; - else - bv->bv_len = size; + len = (size > PAGE_SIZE) ? PAGE_SIZE : size; + + if (!bio_add_page(clone, page, len, 0)) { + mempool_free(page, cc->page_pool); + break; + } - clone->bi_size += bv->bv_len; - clone->bi_vcnt++; - size -= bv->bv_len; + size -= len; } if (!clone->bi_size) { @@ -511,6 +509,9 @@ static void crypt_endio(struct bio *clone, int error) struct crypt_config *cc = io->target->private; unsigned read_io = bio_data_dir(clone) == READ; + if (unlikely(!bio_flagged(clone, BIO_UPTODATE) && !error)) + error = -EIO; + /* * free the processed pages */ @@ -519,10 +520,8 @@ static void crypt_endio(struct bio *clone, int error) goto out; } - if (unlikely(!bio_flagged(clone, BIO_UPTODATE))) { - error = -EIO; + if (unlikely(error)) goto out; - } bio_put(clone); kcryptd_queue_crypt(io); diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 138200bf5e0..9627fa0f947 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -332,6 +332,8 @@ static int dm_hash_rename(const char *old, const char *new) dm_table_put(table); } + dm_kobject_uevent(hc->md); + dm_put(hc->md); up_write(&_hash_lock); kfree(old_name); @@ -1250,21 +1252,17 @@ static int target_message(struct dm_ioctl *param, size_t param_size) if (!table) goto out_argv; - if (tmsg->sector >= dm_table_get_size(table)) { + ti = dm_table_find_target(table, tmsg->sector); + if (!dm_target_is_valid(ti)) { DMWARN("Target message sector outside device."); r = -EINVAL; - goto out_table; - } - - ti = dm_table_find_target(table, tmsg->sector); - if (ti->type->message) + } else if (ti->type->message) r = ti->type->message(ti, argc, argv); else { DMWARN("Target type does not support messages"); r = -EINVAL; } - out_table: dm_table_put(table); out_argv: kfree(argv); diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index e298d8d11f2..47818d8249c 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -99,6 +99,9 @@ static void combine_restrictions_low(struct io_restrictions *lhs, lhs->max_segment_size = min_not_zero(lhs->max_segment_size, rhs->max_segment_size); + lhs->max_hw_sectors = + min_not_zero(lhs->max_hw_sectors, rhs->max_hw_sectors); + lhs->seg_boundary_mask = min_not_zero(lhs->seg_boundary_mask, rhs->seg_boundary_mask); @@ -189,8 +192,10 @@ static int alloc_targets(struct dm_table *t, unsigned int num) /* * Allocate both the target array and offset array at once. + * Append an empty entry to catch sectors beyond the end of + * the device. */ - n_highs = (sector_t *) dm_vcalloc(num, sizeof(struct dm_target) + + n_highs = (sector_t *) dm_vcalloc(num + 1, sizeof(struct dm_target) + sizeof(sector_t)); if (!n_highs) return -ENOMEM; @@ -564,6 +569,9 @@ void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev) rs->max_segment_size = min_not_zero(rs->max_segment_size, q->max_segment_size); + rs->max_hw_sectors = + min_not_zero(rs->max_hw_sectors, q->max_hw_sectors); + rs->seg_boundary_mask = min_not_zero(rs->seg_boundary_mask, q->seg_boundary_mask); @@ -701,6 +709,8 @@ static void check_for_valid_limits(struct io_restrictions *rs) { if (!rs->max_sectors) rs->max_sectors = SAFE_MAX_SECTORS; + if (!rs->max_hw_sectors) + rs->max_hw_sectors = SAFE_MAX_SECTORS; if (!rs->max_phys_segments) rs->max_phys_segments = MAX_PHYS_SEGMENTS; if (!rs->max_hw_segments) @@ -867,6 +877,9 @@ struct dm_target *dm_table_get_target(struct dm_table *t, unsigned int index) /* * Search the btree for the correct target. + * + * Caller should check returned pointer with dm_target_is_valid() + * to trap I/O beyond end of device. */ struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector) { @@ -896,6 +909,7 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q) q->max_hw_segments = t->limits.max_hw_segments; q->hardsect_size = t->limits.hardsect_size; q->max_segment_size = t->limits.max_segment_size; + q->max_hw_sectors = t->limits.max_hw_sectors; q->seg_boundary_mask = t->limits.seg_boundary_mask; q->bounce_pfn = t->limits.bounce_pfn; if (t->limits.no_cluster) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 07cbbb8eb3e..88c0fd65782 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -672,13 +672,19 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector, return clone; } -static void __clone_and_map(struct clone_info *ci) +static int __clone_and_map(struct clone_info *ci) { struct bio *clone, *bio = ci->bio; - struct dm_target *ti = dm_table_find_target(ci->map, ci->sector); - sector_t len = 0, max = max_io_len(ci->md, ci->sector, ti); + struct dm_target *ti; + sector_t len = 0, max; struct dm_target_io *tio; + ti = dm_table_find_target(ci->map, ci->sector); + if (!dm_target_is_valid(ti)) + return -EIO; + + max = max_io_len(ci->md, ci->sector, ti); + /* * Allocate a target io object. */ @@ -736,6 +742,9 @@ static void __clone_and_map(struct clone_info *ci) do { if (offset) { ti = dm_table_find_target(ci->map, ci->sector); + if (!dm_target_is_valid(ti)) + return -EIO; + max = max_io_len(ci->md, ci->sector, ti); tio = alloc_tio(ci->md); @@ -759,6 +768,8 @@ static void __clone_and_map(struct clone_info *ci) ci->idx++; } + + return 0; } /* @@ -767,6 +778,7 @@ static void __clone_and_map(struct clone_info *ci) static int __split_bio(struct mapped_device *md, struct bio *bio) { struct clone_info ci; + int error = 0; ci.map = dm_get_table(md); if (unlikely(!ci.map)) @@ -784,11 +796,11 @@ static int __split_bio(struct mapped_device *md, struct bio *bio) ci.idx = bio->bi_idx; start_io_acct(ci.io); - while (ci.sector_count) - __clone_and_map(&ci); + while (ci.sector_count && !error) + error = __clone_and_map(&ci); /* drop the extra reference count */ - dec_pending(ci.io, 0); + dec_pending(ci.io, error); dm_table_put(ci.map); return 0; @@ -1502,7 +1514,7 @@ int dm_resume(struct mapped_device *md) dm_table_unplug_all(map); - kobject_uevent(&md->disk->kobj, KOBJ_CHANGE); + dm_kobject_uevent(md); r = 0; @@ -1516,6 +1528,11 @@ out: /*----------------------------------------------------------------- * Event notification. *---------------------------------------------------------------*/ +void dm_kobject_uevent(struct mapped_device *md) +{ + kobject_uevent(&md->disk->kobj, KOBJ_CHANGE); +} + uint32_t dm_next_uevent_seq(struct mapped_device *md) { return atomic_add_return(1, &md->uevent_seq); diff --git a/drivers/md/dm.h b/drivers/md/dm.h index 4b3faa45277..b4584a39383 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -112,6 +112,11 @@ int dm_table_resume_targets(struct dm_table *t); int dm_table_any_congested(struct dm_table *t, int bdi_bits); void dm_table_unplug_all(struct dm_table *t); +/* + * To check the return value from dm_table_find_target(). + */ +#define dm_target_is_valid(t) ((t)->table) + /*----------------------------------------------------------------- * A registry of target types. *---------------------------------------------------------------*/ @@ -182,4 +187,6 @@ union map_info *dm_get_mapinfo(struct bio *bio); int dm_open_count(struct mapped_device *md); int dm_lock_for_deletion(struct mapped_device *md); +void dm_kobject_uevent(struct mapped_device *md); + #endif diff --git a/drivers/media/Makefile b/drivers/media/Makefile index 8fa19939c2b..8cf91353b56 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -3,6 +3,6 @@ # obj-y := common/ -obj-$(CONFIG_VIDEO_DEV) += video/ +obj-y += video/ obj-$(CONFIG_VIDEO_DEV) += radio/ obj-$(CONFIG_DVB_CORE) += dvb/ diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index f245a3b2ef4..ae36d101006 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -1205,13 +1205,10 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int DEB_D(("VIDIOCGMBUF \n")); q = &fh->video_q; - mutex_lock(&q->lock); err = videobuf_mmap_setup(q,gbuffers,gbufsize, V4L2_MEMORY_MMAP); - if (err < 0) { - mutex_unlock(&q->lock); + if (err < 0) return err; - } gbuffers = err; memset(mbuf,0,sizeof(*mbuf)); @@ -1219,7 +1216,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int mbuf->size = gbuffers * gbufsize; for (i = 0; i < gbuffers; i++) mbuf->offsets[i] = i * gbufsize; - mutex_unlock(&q->lock); return 0; } #endif @@ -1440,10 +1436,7 @@ static void video_close(struct saa7146_dev *dev, struct file *file) err = saa7146_stop_preview(fh); } - // release all capture buffers - mutex_lock(&q->lock); - videobuf_read_stop(q); - mutex_unlock(&q->lock); + videobuf_stop(q); /* hmm, why is this function declared void? */ /* return err */ diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 73ac0a93fde..60a910052c1 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -62,3 +62,6 @@ dvb-usb-af9005-remote-objs = af9005-remote.o obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ +# due to tuner-xc3028 +EXTRA_CFLAGS += -Idrivers/media/video + diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c index 9a184da01c4..8ee6cd4da9e 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-common.c +++ b/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -223,6 +223,9 @@ static struct dibx000_agc_config dib3000p_panasonic_agc_config = { .agc2_slope2 = 0x1e, }; +#if defined(CONFIG_DVB_DIB3000MC) || \ + (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE)) + static struct dib3000mc_config mod3000p_dib3000p_config = { &dib3000p_panasonic_agc_config, @@ -305,6 +308,7 @@ int dibusb_dib3000mc_tuner_attach(struct dvb_usb_adapter *adap) return 0; } EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach); +#endif /* * common remote control stuff diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 8dee7ec9456..562d9208857 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -107,7 +107,7 @@ static struct vsb_snr_tab { u16 val; u16 data; } vsb_snr_tab[] = { - { 1023, 770, }, + { 924, 300, }, { 923, 300, }, { 918, 295, }, { 915, 290, }, @@ -154,6 +154,7 @@ static struct qam64_snr_tab { u16 val; u16 data; } qam64_snr_tab[] = { + { 1, 0, }, { 12, 300, }, { 15, 290, }, { 18, 280, }, @@ -217,6 +218,7 @@ static struct qam64_snr_tab { { 95, 202, }, { 96, 201, }, { 104, 200, }, + { 255, 0, }, }; /* QAM256 SNR lookup table */ @@ -224,6 +226,7 @@ static struct qam256_snr_tab { u16 val; u16 data; } qam256_snr_tab[] = { + { 1, 0, }, { 12, 400, }, { 13, 390, }, { 15, 380, }, @@ -292,6 +295,7 @@ static struct qam256_snr_tab { { 105, 262, }, { 106, 261, }, { 110, 260, }, + { 255, 0, }, }; /* 8 bit registers, 16 bit values */ @@ -670,14 +674,15 @@ static int s5h1409_read_snr(struct dvb_frontend* fe, u16* snr) u16 reg; dprintk("%s()\n", __FUNCTION__); - reg = s5h1409_readreg(state, 0xf1) & 0x1ff; - switch(state->current_modulation) { case QAM_64: + reg = s5h1409_readreg(state, 0xf0) & 0xff; return s5h1409_qam64_lookup_snr(fe, snr, reg); case QAM_256: + reg = s5h1409_readreg(state, 0xf0) & 0xff; return s5h1409_qam256_lookup_snr(fe, snr, reg); case VSB_8: + reg = s5h1409_readreg(state, 0xf1) & 0x3ff; return s5h1409_vsb_lookup_snr(fe, snr, reg); default: break; diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c index 9a8ddc537f8..9d26ace6515 100644 --- a/drivers/media/dvb/frontends/tda10086.c +++ b/drivers/media/dvb/frontends/tda10086.c @@ -158,7 +158,7 @@ static int tda10086_init(struct dvb_frontend* fe) tda10086_write_byte(state, 0x3d, 0x80); // setup SEC - tda10086_write_byte(state, 0x36, 0x00); // all SEC off + tda10086_write_byte(state, 0x36, 0x80); // all SEC off, no 22k tone tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000))); // } tone frequency tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8); // } @@ -183,13 +183,13 @@ static int tda10086_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) dprintk ("%s\n", __FUNCTION__); - switch(tone) { + switch (tone) { case SEC_TONE_OFF: - tda10086_write_byte(state, 0x36, 0x00); + tda10086_write_byte(state, 0x36, 0x80); break; case SEC_TONE_ON: - tda10086_write_byte(state, 0x36, 0x01); + tda10086_write_byte(state, 0x36, 0x81); break; } @@ -212,7 +212,7 @@ static int tda10086_send_master_cmd (struct dvb_frontend* fe, for(i=0; i< cmd->msg_len; i++) { tda10086_write_byte(state, 0x48+i, cmd->msg[i]); } - tda10086_write_byte(state, 0x36, 0x08 | ((cmd->msg_len - 1) << 4)); + tda10086_write_byte(state, 0x36, 0x88 | ((cmd->msg_len - 1) << 4)); tda10086_diseqc_wait(state); @@ -230,11 +230,11 @@ static int tda10086_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minic switch(minicmd) { case SEC_MINI_A: - tda10086_write_byte(state, 0x36, 0x04); + tda10086_write_byte(state, 0x36, 0x84); break; case SEC_MINI_B: - tda10086_write_byte(state, 0x36, 0x06); + tda10086_write_byte(state, 0x36, 0x86); break; } diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c index a97a7fd2c89..0106df4c55e 100644 --- a/drivers/media/dvb/frontends/zl10353.c +++ b/drivers/media/dvb/frontends/zl10353.c @@ -122,7 +122,7 @@ static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, enum fe_bandwidth bandwidth, u16 *nominal_rate) { - u32 adc_clock = 22528; /* 20.480 MHz on the board(!?) */ + u32 adc_clock = 45056; /* 45.056 MHz */ u8 bw; struct zl10353_state *state = fe->demodulator_priv; @@ -142,7 +142,7 @@ static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, break; } - *nominal_rate = (64 * bw * (1<<16) / (7 * 8) * 4000 / adc_clock + 2) / 4; + *nominal_rate = (bw * (1 << 23) / 7 * 125 + adc_clock / 2) / adc_clock; dprintk("%s: bw %d, adc_clock %d => 0x%x\n", __FUNCTION__, bw, adc_clock, *nominal_rate); diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h index cb274dc12b8..1c3d494a6da 100644 --- a/drivers/media/dvb/frontends/zl10353.h +++ b/drivers/media/dvb/frontends/zl10353.h @@ -30,7 +30,7 @@ struct zl10353_config u8 demod_address; /* frequencies in kHz */ - int adc_clock; // default: 22528 + int adc_clock; /* default: 45056 */ /* set if no pll is connected to the secondary i2c bus */ int no_tuner; diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c index b767b098d14..96b415576f0 100644 --- a/drivers/media/video/bt866.c +++ b/drivers/media/video/bt866.c @@ -300,7 +300,6 @@ static struct i2c_client bt866_client_tmpl = .addr = 0, .adapter = NULL, .driver = &i2c_driver_bt866, - .usage_count = 0 }; static int bt866_found_proc(struct i2c_adapter *adapter, diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 3abd9fa54d2..585d1ef95af 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -5080,7 +5080,7 @@ static void PXC200_muxsel(struct bttv *btv, unsigned int input) /* ----------------------------------------------------------------------- */ /* motherboard chipset specific stuff */ -void __devinit bttv_check_chipset(void) +void __init bttv_check_chipset(void) { int pcipci_fail = 0; struct pci_dev *dev = NULL; diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index a88b56e6ca0..c02d92deacd 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3827,10 +3827,7 @@ static int bttv_release(struct inode *inode, struct file *file) /* stop vbi capture */ if (check_btres(fh, RESOURCE_VBI)) { - if (fh->vbi.streaming) - videobuf_streamoff(&fh->vbi); - if (fh->vbi.reading) - videobuf_read_stop(&fh->vbi); + videobuf_stop(&fh->vbi); free_btres(btv,fh,RESOURCE_VBI); } @@ -4988,7 +4985,7 @@ static struct pci_driver bttv_pci_driver = { #endif }; -static int bttv_init_module(void) +static int __init bttv_init_module(void) { int ret; @@ -5021,7 +5018,7 @@ static int bttv_init_module(void) return pci_register_driver(&bttv_pci_driver); } -static void bttv_cleanup_module(void) +static void __exit bttv_cleanup_module(void) { pci_unregister_driver(&bttv_pci_driver); bus_unregister(&bttv_sub_bus_type); diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index f33f0b47142..f802b565356 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1085,10 +1085,7 @@ static int mpeg_release(struct inode *inode, struct file *file) cx8802_cancel_buffers(fh->dev); /* stop mpeg capture */ - if (fh->mpegq.streaming) - videobuf_streamoff(&fh->mpegq); - if (fh->mpegq.reading) - videobuf_read_stop(&fh->mpegq); + videobuf_stop(&fh->mpegq); videobuf_mmap_free(&fh->mpegq); file->private_data = NULL; diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 5ee05f8f3fa..c84dafbdb99 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -851,10 +851,7 @@ static int video_release(struct inode *inode, struct file *file) /* stop vbi capture */ if (res_check(fh, RESOURCE_VBI)) { - if (fh->vbiq.streaming) - videobuf_streamoff(&fh->vbiq); - if (fh->vbiq.reading) - videobuf_read_stop(&fh->vbiq); + videobuf_stop(&fh->vbiq); res_free(dev,fh,RESOURCE_VBI); } diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 2529c298b86..0906bc5766c 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -144,7 +144,8 @@ static int em28xx_config(struct em28xx *dev) { /* Sets I2C speed to 100 KHz */ - em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1); + if (!dev->is_em2800) + em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1); /* enable vbi capturing */ @@ -570,7 +571,9 @@ static void em28xx_vm_close(struct vm_area_struct *vma) { /* NOTE: buffers are not freed here */ struct em28xx_frame_t *f = vma->vm_private_data; - f->vma_use_count--; + + if (f->vma_use_count) + f->vma_use_count--; } static struct vm_operations_struct em28xx_vm_ops = { diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index 623eea2652c..77b27dc750b 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -706,7 +706,7 @@ void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg) } /* init + register i2c algo-bit adapter */ -int __devinit init_ivtv_i2c(struct ivtv *itv) +int init_ivtv_i2c(struct ivtv *itv) { IVTV_DEBUG_I2C("i2c init\n"); diff --git a/drivers/media/video/ivtv/ivtv-i2c.h b/drivers/media/video/ivtv/ivtv-i2c.h index de6a0744229..987042c09b6 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.h +++ b/drivers/media/video/ivtv/ivtv-i2c.h @@ -35,7 +35,7 @@ int ivtv_call_i2c_client(struct ivtv *itv, int addr, unsigned int cmd, void *arg void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg); /* init + register i2c algo-bit adapter */ -int __devinit init_ivtv_i2c(struct ivtv *itv); +int init_ivtv_i2c(struct ivtv *itv); void exit_ivtv_i2c(struct ivtv *itv); #endif diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index aa03e61ef31..74fb0e02197 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -76,7 +76,7 @@ static struct { int minor_offset; int dma, pio; enum v4l2_buf_type buf_type; - struct file_operations *fops; + const struct file_operations *fops; } ivtv_stream_info[] = { { /* IVTV_ENC_STREAM_TYPE_MPG */ "encoder MPG", diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index ad0232935df..996b49491f5 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -187,12 +187,14 @@ static int i2c_senddata(struct saa5246a_device *t, ...) { unsigned char buf[64]; int v; - int ct=0; + int ct = 0; va_list argp; - va_start(argp,t); + va_start(argp, t); - while((v=va_arg(argp,int))!=-1) - buf[ct++]=v; + while ((v = va_arg(argp, int)) != -1) + buf[ct++] = v; + + va_end(argp); return i2c_sendbuf(t, buf[0], ct-1, buf+1); } diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 94bb59a32b1..f55d6e85f20 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -282,12 +282,14 @@ static int i2c_senddata(struct saa5249_device *t, ...) { unsigned char buf[64]; int v; - int ct=0; + int ct = 0; va_list argp; va_start(argp,t); - while((v=va_arg(argp,int))!=-1) - buf[ct++]=v; + while ((v = va_arg(argp, int)) != -1) + buf[ct++] = v; + + va_end(argp); return i2c_sendbuf(t, buf[0], ct-1, buf+1); } diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index b9c5cf7dc84..4878f306778 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -222,7 +222,8 @@ static irqreturn_t saa7134_alsa_irq(int irq, void *dev_id) if (report & SAA7134_IRQ_REPORT_DONE_RA3) { handled = 1; - saa_writel(SAA7134_IRQ_REPORT,report); + saa_writel(SAA7134_IRQ_REPORT, + SAA7134_IRQ_REPORT_DONE_RA3); saa7134_irq_alsa_done(dev, status); } else { goto out; @@ -457,7 +458,7 @@ static struct snd_pcm_hardware snd_card_saa7134_capture = .buffer_bytes_max = (256*1024), .period_bytes_min = 64, .period_bytes_max = (256*1024), - .periods_min = 2, + .periods_min = 4, .periods_max = 1024, }; @@ -491,7 +492,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, snd_assert(period_size >= 0x100 && period_size <= 0x10000, return -EINVAL); - snd_assert(periods >= 2, return -EINVAL); + snd_assert(periods >= 4, return -EINVAL); snd_assert(period_size * periods <= 1024 * 1024, return -EINVAL); dev = saa7134->dev; @@ -647,7 +648,14 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream) saa7134_tvaudio_setmute(dev); } - if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) + err = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) + return err; + + err = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIODS, 2); + if (err < 0) return err; return 0; diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 4f3dad9ae6d..98c1b084a71 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -334,7 +334,7 @@ struct saa7134_board saa7134_boards[] = { .tv = 1, },{ .name = name_comp1, - .vmux = 2, + .vmux = 0, .amux = LINE1, },{ .name = name_comp2, @@ -3221,6 +3221,7 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, + .tuner_config = 1, .mpeg = SAA7134_MPEG_DVB, .inputs = {{ .name = name_tv, diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index a499eea379e..4fd187ac9d7 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -569,21 +569,22 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id) for (loop = 0; loop < 10; loop++) { report = saa_readl(SAA7134_IRQ_REPORT); status = saa_readl(SAA7134_IRQ_STATUS); - if (0 == report) { - if (irq_debug > 1) - printk(KERN_DEBUG "%s/irq: no (more) work\n", - dev->name); - goto out; - } - - /* If dmasound support is active and we get a sound report, exit - and let the saa7134-alsa/oss module deal with it */ + /* If dmasound support is active and we get a sound report, + * mask out the report and let the saa7134-alsa module deal + * with it */ if ((report & SAA7134_IRQ_REPORT_DONE_RA3) && (dev->dmasound.priv_data != NULL) ) { if (irq_debug > 1) - printk(KERN_DEBUG "%s/irq: ignoring interrupt for DMA sound\n", + printk(KERN_DEBUG "%s/irq: preserving DMA sound interrupt\n", + dev->name); + report &= ~SAA7134_IRQ_REPORT_DONE_RA3; + } + + if (0 == report) { + if (irq_debug > 1) + printk(KERN_DEBUG "%s/irq: no (more) work\n", dev->name); goto out; } diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 38d87332cc5..e1ab099ec4c 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -662,6 +662,7 @@ static struct tda1004x_config hauppauge_hvr_1110_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, + .tuner_config = 1, .request_firmware = philips_tda1004x_request_firmware }; diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 75d0c5bf46d..9322f44865b 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -110,11 +110,8 @@ static int ts_release(struct inode *inode, struct file *file) { struct saa7134_dev *dev = file->private_data; - if (dev->empress_tsq.streaming) - videobuf_streamoff(&dev->empress_tsq); mutex_lock(&dev->empress_tsq.lock); - if (dev->empress_tsq.reading) - videobuf_read_stop(&dev->empress_tsq); + videobuf_stop(&dev->empress_tsq); videobuf_mmap_free(&dev->empress_tsq); dev->empress_users--; diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 3b9ffb4b648..6396d9b5c06 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -1445,10 +1445,7 @@ static int video_release(struct inode *inode, struct file *file) /* stop vbi capture */ if (res_check(fh, RESOURCE_VBI)) { - if (fh->vbi.streaming) - videobuf_streamoff(&fh->vbi); - if (fh->vbi.reading) - videobuf_read_stop(&fh->vbi); + videobuf_stop(&fh->vbi); res_free(dev,fh,RESOURCE_VBI); } diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c index 25d0aef88ef..445eba4174d 100644 --- a/drivers/media/video/tvp5150.c +++ b/drivers/media/video/tvp5150.c @@ -290,6 +290,7 @@ static inline void tvp5150_selmux(struct i2c_client *c) int opmode=0; struct tvp5150 *decoder = i2c_get_clientdata(c); int input = 0; + unsigned char val; if ((decoder->route.output & TVP5150_BLACK_SCREEN) || !decoder->enable) input = 8; @@ -315,6 +316,16 @@ static inline void tvp5150_selmux(struct i2c_client *c) tvp5150_write(c, TVP5150_OP_MODE_CTL, opmode); tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, input); + + /* Svideo should enable YCrCb output and disable GPCL output + * For Composite and TV, it should be the reverse + */ + val = tvp5150_read(c, TVP5150_MISC_CTL); + if (decoder->route.input == TVP5150_SVIDEO) + val = (val & ~0x40) | 0x10; + else + val = (val & ~0x10) | 0x40; + tvp5150_write(c, TVP5150_MISC_CTL, val); }; struct i2c_reg_value { diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index 89a44f16f0b..c8a5cb57963 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -141,6 +141,7 @@ void videobuf_queue_core_init(struct videobuf_queue* q, INIT_LIST_HEAD(&q->stream); } +/* Locking: Only usage in bttv unsafe find way to remove */ int videobuf_queue_is_busy(struct videobuf_queue *q) { int i; @@ -178,6 +179,7 @@ int videobuf_queue_is_busy(struct videobuf_queue *q) return 0; } +/* Locking: Caller holds q->lock */ void videobuf_queue_cancel(struct videobuf_queue *q) { unsigned long flags=0; @@ -208,6 +210,7 @@ void videobuf_queue_cancel(struct videobuf_queue *q) /* --------------------------------------------------------------------- */ +/* Locking: Caller holds q->lock */ enum v4l2_field videobuf_next_field(struct videobuf_queue *q) { enum v4l2_field field = q->field; @@ -226,6 +229,7 @@ enum v4l2_field videobuf_next_field(struct videobuf_queue *q) return field; } +/* Locking: Caller holds q->lock */ static void videobuf_status(struct videobuf_queue *q, struct v4l2_buffer *b, struct videobuf_buffer *vb, enum v4l2_buf_type type) { @@ -281,20 +285,108 @@ static void videobuf_status(struct videobuf_queue *q, struct v4l2_buffer *b, b->sequence = vb->field_count >> 1; } +/* Locking: Caller holds q->lock */ +static int __videobuf_mmap_free(struct videobuf_queue *q) +{ + int i; + int rc; + + if (!q) + return 0; + + MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + + rc = CALL(q,mmap_free,q); + if (rc<0) + return rc; + + for (i = 0; i < VIDEO_MAX_FRAME; i++) { + if (NULL == q->bufs[i]) + continue; + q->ops->buf_release(q,q->bufs[i]); + kfree(q->bufs[i]); + q->bufs[i] = NULL; + } + + return rc; +} + +int videobuf_mmap_free(struct videobuf_queue *q) +{ + int ret; + mutex_lock(&q->lock); + ret = __videobuf_mmap_free(q); + mutex_unlock(&q->lock); + return ret; +} + +/* Locking: Caller holds q->lock */ +static int __videobuf_mmap_setup(struct videobuf_queue *q, + unsigned int bcount, unsigned int bsize, + enum v4l2_memory memory) +{ + unsigned int i; + int err; + + MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + + err = __videobuf_mmap_free(q); + if (0 != err) + return err; + + /* Allocate and initialize buffers */ + for (i = 0; i < bcount; i++) { + q->bufs[i] = videobuf_alloc(q); + + if (q->bufs[i] == NULL) + break; + + q->bufs[i]->i = i; + q->bufs[i]->input = UNSET; + q->bufs[i]->memory = memory; + q->bufs[i]->bsize = bsize; + switch (memory) { + case V4L2_MEMORY_MMAP: + q->bufs[i]->boff = bsize * i; + break; + case V4L2_MEMORY_USERPTR: + case V4L2_MEMORY_OVERLAY: + /* nothing */ + break; + } + } + + if (!i) + return -ENOMEM; + + dprintk(1,"mmap setup: %d buffers, %d bytes each\n", + i, bsize); + + return i; +} + +int videobuf_mmap_setup(struct videobuf_queue *q, + unsigned int bcount, unsigned int bsize, + enum v4l2_memory memory) +{ + int ret; + mutex_lock(&q->lock); + ret = __videobuf_mmap_setup(q, bcount, bsize, memory); + mutex_unlock(&q->lock); + return ret; +} + int videobuf_reqbufs(struct videobuf_queue *q, struct v4l2_requestbuffers *req) { unsigned int size,count; int retval; - if (req->type != q->type) { - dprintk(1,"reqbufs: queue type invalid\n"); - return -EINVAL; - } if (req->count < 1) { dprintk(1,"reqbufs: count invalid (%d)\n",req->count); return -EINVAL; } + if (req->memory != V4L2_MEMORY_MMAP && req->memory != V4L2_MEMORY_USERPTR && req->memory != V4L2_MEMORY_OVERLAY) { @@ -303,6 +395,12 @@ int videobuf_reqbufs(struct videobuf_queue *q, } mutex_lock(&q->lock); + if (req->type != q->type) { + dprintk(1,"reqbufs: queue type invalid\n"); + retval = -EINVAL; + goto done; + } + if (q->streaming) { dprintk(1,"reqbufs: streaming already exists\n"); retval = -EBUSY; @@ -323,7 +421,7 @@ int videobuf_reqbufs(struct videobuf_queue *q, dprintk(1,"reqbufs: bufs=%d, size=0x%x [%d pages total]\n", count, size, (count*size)>>PAGE_SHIFT); - retval = videobuf_mmap_setup(q,count,size,req->memory); + retval = __videobuf_mmap_setup(q,count,size,req->memory); if (retval < 0) { dprintk(1,"reqbufs: mmap setup returned %d\n",retval); goto done; @@ -338,20 +436,28 @@ int videobuf_reqbufs(struct videobuf_queue *q, int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b) { + int ret = -EINVAL; + + mutex_lock(&q->lock); if (unlikely(b->type != q->type)) { dprintk(1,"querybuf: Wrong type.\n"); - return -EINVAL; + goto done; } if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) { dprintk(1,"querybuf: index out of range.\n"); - return -EINVAL; + goto done; } if (unlikely(NULL == q->bufs[b->index])) { dprintk(1,"querybuf: buffer is null.\n"); - return -EINVAL; + goto done; } + videobuf_status(q,b,q->bufs[b->index],q->type); - return 0; + + ret = 0; +done: + mutex_unlock(&q->lock); + return ret; } int videobuf_qbuf(struct videobuf_queue *q, @@ -541,22 +647,30 @@ int videobuf_streamon(struct videobuf_queue *q) return retval; } -int videobuf_streamoff(struct videobuf_queue *q) +/* Locking: Caller holds q->lock */ +static int __videobuf_streamoff(struct videobuf_queue *q) { - int retval = -EINVAL; - - mutex_lock(&q->lock); if (!q->streaming) - goto done; + return -EINVAL; + videobuf_queue_cancel(q); q->streaming = 0; - retval = 0; - done: + return 0; +} + +int videobuf_streamoff(struct videobuf_queue *q) +{ + int retval; + + mutex_lock(&q->lock); + retval = __videobuf_streamoff(q); mutex_unlock(&q->lock); + return retval; } +/* Locking: Caller holds q->lock */ static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q, char __user *data, size_t count, loff_t *ppos) @@ -691,7 +805,8 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, return retval; } -int videobuf_read_start(struct videobuf_queue *q) +/* Locking: Caller holds q->lock */ +int __videobuf_read_start(struct videobuf_queue *q) { enum v4l2_field field; unsigned long flags=0; @@ -705,7 +820,7 @@ int videobuf_read_start(struct videobuf_queue *q) count = VIDEO_MAX_FRAME; size = PAGE_ALIGN(size); - err = videobuf_mmap_setup(q, count, size, V4L2_MEMORY_USERPTR); + err = __videobuf_mmap_setup(q, count, size, V4L2_MEMORY_USERPTR); if (err < 0) return err; @@ -728,12 +843,13 @@ int videobuf_read_start(struct videobuf_queue *q) return 0; } -void videobuf_read_stop(struct videobuf_queue *q) +static void __videobuf_read_stop(struct videobuf_queue *q) { int i; + videobuf_queue_cancel(q); - videobuf_mmap_free(q); + __videobuf_mmap_free(q); INIT_LIST_HEAD(&q->stream); for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) @@ -743,8 +859,41 @@ void videobuf_read_stop(struct videobuf_queue *q) } q->read_buf = NULL; q->reading = 0; + } +int videobuf_read_start(struct videobuf_queue *q) +{ + int rc; + + mutex_lock(&q->lock); + rc = __videobuf_read_start(q); + mutex_unlock(&q->lock); + + return rc; +} + +void videobuf_read_stop(struct videobuf_queue *q) +{ + mutex_lock(&q->lock); + __videobuf_read_stop(q); + mutex_unlock(&q->lock); +} + +void videobuf_stop(struct videobuf_queue *q) +{ + mutex_lock(&q->lock); + + if (q->streaming) + __videobuf_streamoff(q); + + if (q->reading) + __videobuf_read_stop(q); + + mutex_unlock(&q->lock); +} + + ssize_t videobuf_read_stream(struct videobuf_queue *q, char __user *data, size_t count, loff_t *ppos, int vbihack, int nonblocking) @@ -760,7 +909,7 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q, if (q->streaming) goto done; if (!q->reading) { - retval = videobuf_read_start(q); + retval = __videobuf_read_start(q); if (retval < 0) goto done; } @@ -833,7 +982,7 @@ unsigned int videobuf_poll_stream(struct file *file, struct videobuf_buffer, stream); } else { if (!q->reading) - videobuf_read_start(q); + __videobuf_read_start(q); if (!q->reading) { rc = POLLERR; } else if (NULL == q->read_buf) { @@ -858,75 +1007,6 @@ unsigned int videobuf_poll_stream(struct file *file, return rc; } -int videobuf_mmap_setup(struct videobuf_queue *q, - unsigned int bcount, unsigned int bsize, - enum v4l2_memory memory) -{ - unsigned int i; - int err; - - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); - - err = videobuf_mmap_free(q); - if (0 != err) - return err; - - /* Allocate and initialize buffers */ - for (i = 0; i < bcount; i++) { - q->bufs[i] = videobuf_alloc(q); - - if (q->bufs[i] == NULL) - break; - - q->bufs[i]->i = i; - q->bufs[i]->input = UNSET; - q->bufs[i]->memory = memory; - q->bufs[i]->bsize = bsize; - switch (memory) { - case V4L2_MEMORY_MMAP: - q->bufs[i]->boff = bsize * i; - break; - case V4L2_MEMORY_USERPTR: - case V4L2_MEMORY_OVERLAY: - /* nothing */ - break; - } - } - - if (!i) - return -ENOMEM; - - dprintk(1,"mmap setup: %d buffers, %d bytes each\n", - i, bsize); - - return i; -} - -int videobuf_mmap_free(struct videobuf_queue *q) -{ - int i; - int rc; - - if (!q) - return 0; - - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); - - rc = CALL(q,mmap_free,q); - if (rc<0) - return rc; - - for (i = 0; i < VIDEO_MAX_FRAME; i++) { - if (NULL == q->bufs[i]) - continue; - q->ops->buf_release(q,q->bufs[i]); - kfree(q->bufs[i]); - q->bufs[i] = NULL; - } - - return rc; -} - int videobuf_mmap_mapper(struct videobuf_queue *q, struct vm_area_struct *vma) { @@ -991,6 +1071,7 @@ EXPORT_SYMBOL_GPL(videobuf_streamoff); EXPORT_SYMBOL_GPL(videobuf_read_start); EXPORT_SYMBOL_GPL(videobuf_read_stop); +EXPORT_SYMBOL_GPL(videobuf_stop); EXPORT_SYMBOL_GPL(videobuf_read_stream); EXPORT_SYMBOL_GPL(videobuf_read_one); EXPORT_SYMBOL_GPL(videobuf_poll_stream); diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c index cd74341c984..e01259438bb 100644 --- a/drivers/media/video/videobuf-vmalloc.c +++ b/drivers/media/video/videobuf-vmalloc.c @@ -51,7 +51,7 @@ videobuf_vm_open(struct vm_area_struct *vma) { struct videobuf_mapping *map = vma->vm_private_data; - dprintk(2,"vm_open %p [count=%d,vma=%08lx-%08lx]\n",map, + dprintk(2,"vm_open %p [count=%u,vma=%08lx-%08lx]\n",map, map->count,vma->vm_start,vma->vm_end); map->count++; @@ -64,7 +64,7 @@ videobuf_vm_close(struct vm_area_struct *vma) struct videobuf_queue *q = map->q; int i; - dprintk(2,"vm_close %p [count=%d,vma=%08lx-%08lx]\n",map, + dprintk(2,"vm_close %p [count=%u,vma=%08lx-%08lx]\n",map, map->count,vma->vm_start,vma->vm_end); map->count--; @@ -221,7 +221,7 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, } /* create mapping + update buffer list */ - map = q->bufs[first]->map = kmalloc(sizeof(struct videobuf_mapping),GFP_KERNEL); + map = q->bufs[first]->map = kzalloc(sizeof(struct videobuf_mapping),GFP_KERNEL); if (NULL == map) return -ENOMEM; diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index ee73dc75131..9b54ff9d2e3 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -1076,6 +1076,7 @@ static int vivi_release(struct inode *inode, struct file *file) int minor = iminor(inode); vivi_stop_thread(vidq); + videobuf_stop(&fh->vb_vidq); videobuf_mmap_free(&fh->vb_vidq); kfree (fh); diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index ab23a322158..cf56647a6ca 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -987,9 +987,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */ KEY_UNKNOWN, /* 0x0D: FN+INSERT */ KEY_UNKNOWN, /* 0x0E: FN+DELETE */ - KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */ + KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */ /* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */ - KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */ + KEY_RESERVED, /* 0x10: FN+END (brightness down) */ KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index ff59d2e0475..785bbdcf4a5 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -7,6 +7,10 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. + * + * Thanks to the following companies for their support: + * + * - JMicron (hardware and technical support) */ #include <linux/delay.h> @@ -26,13 +30,29 @@ static unsigned int debug_quirks = 0; +/* + * Different quirks to handle when the hardware deviates from a strict + * interpretation of the SDHCI specification. + */ + +/* Controller doesn't honor resets unless we touch the clock register */ #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) +/* Controller has bad caps bits, but really supports DMA */ #define SDHCI_QUIRK_FORCE_DMA (1<<1) /* Controller doesn't like some resets when there is no card inserted. */ #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) +/* Controller doesn't like clearing the power reg before a change */ #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) +/* Controller has flaky internal state so reset it on each ios change */ #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) +/* Controller has an unusable DMA engine */ #define SDHCI_QUIRK_BROKEN_DMA (1<<5) +/* Controller can only DMA from 32-bit aligned addresses */ +#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6) +/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7) +/* Controller needs to be reset after each request to stay stable */ +#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) static const struct pci_device_id pci_ids[] __devinitdata = { { @@ -97,6 +117,16 @@ static const struct pci_device_id pci_ids[] __devinitdata = { SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, }, + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_RESET_AFTER_REQUEST, + }, + { /* Generic SD host controller */ PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) }, @@ -419,7 +449,29 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL); - if (host->flags & SDHCI_USE_DMA) { + if (host->flags & SDHCI_USE_DMA) + host->flags |= SDHCI_REQ_USE_DMA; + + if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && + (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) && + ((data->blksz * data->blocks) & 0x3))) { + DBG("Reverting to PIO because of transfer size (%d)\n", + data->blksz * data->blocks); + host->flags &= ~SDHCI_REQ_USE_DMA; + } + + /* + * The assumption here being that alignment is the same after + * translation to device address space. + */ + if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && + (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && + (data->sg->offset & 0x3))) { + DBG("Reverting to PIO because of bad alignment\n"); + host->flags &= ~SDHCI_REQ_USE_DMA; + } + + if (host->flags & SDHCI_REQ_USE_DMA) { int count; count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len, @@ -456,7 +508,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, mode |= SDHCI_TRNS_MULTI; if (data->flags & MMC_DATA_READ) mode |= SDHCI_TRNS_READ; - if (host->flags & SDHCI_USE_DMA) + if (host->flags & SDHCI_REQ_USE_DMA) mode |= SDHCI_TRNS_DMA; writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE); @@ -472,7 +524,7 @@ static void sdhci_finish_data(struct sdhci_host *host) data = host->data; host->data = NULL; - if (host->flags & SDHCI_USE_DMA) { + if (host->flags & SDHCI_REQ_USE_DMA) { pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len, (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE); } @@ -886,7 +938,8 @@ static void sdhci_tasklet_finish(unsigned long param) */ if (mrq->cmd->error || (mrq->data && (mrq->data->error || - (mrq->data->stop && mrq->data->stop->error)))) { + (mrq->data->stop && mrq->data->stop->error))) || + (host->chip->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) { /* Some controllers need this kick or reset won't work here */ if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { @@ -1284,7 +1337,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) version = readw(host->ioaddr + SDHCI_HOST_VERSION); version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; - if (version != 0) { + if (version > 1) { printk(KERN_ERR "%s: Unknown controller version (%d). " "You may experience problems.\n", host->slot_descr, version); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 05195ea900f..e4d77b038bf 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -171,7 +171,8 @@ struct sdhci_host { spinlock_t lock; /* Mutex */ int flags; /* Host attributes */ -#define SDHCI_USE_DMA (1<<0) +#define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */ +#define SDHCI_REQ_USE_DMA (1<<1) /* Use DMA for this req. */ unsigned int max_clk; /* Max possible freq (MHz) */ unsigned int timeout_clk; /* Timeout freq (KHz) */ diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6cde4edc846..d9107e542df 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2588,7 +2588,6 @@ config MLX4_DEBUG config TEHUTI tristate "Tehuti Networks 10G Ethernet" depends on PCI - select ZLIB_INFLATE help Tehuti Networks 10G Ethernet NIC diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index da767d3d5af..4e7b46e4487 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -56,8 +56,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "1.6.8" -#define DRV_MODULE_RELDATE "October 17, 2007" +#define DRV_MODULE_VERSION "1.6.9" +#define DRV_MODULE_RELDATE "December 8, 2007" #define RUN_AT(x) (jiffies + (x)) @@ -2387,18 +2387,24 @@ bnx2_reuse_rx_skb(struct bnx2 *bp, struct sk_buff *skb, prod_bd->rx_bd_haddr_lo = cons_bd->rx_bd_haddr_lo; } +static inline u16 +bnx2_get_hw_rx_cons(struct bnx2 *bp) +{ + u16 cons = bp->status_blk->status_rx_quick_consumer_index0; + + if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT)) + cons++; + return cons; +} + static int bnx2_rx_int(struct bnx2 *bp, int budget) { - struct status_block *sblk = bp->status_blk; u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod; struct l2_fhdr *rx_hdr; int rx_pkt = 0; - hw_cons = bp->hw_rx_cons = sblk->status_rx_quick_consumer_index0; - if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) { - hw_cons++; - } + hw_cons = bnx2_get_hw_rx_cons(bp); sw_cons = bp->rx_cons; sw_prod = bp->rx_prod; @@ -2515,10 +2521,7 @@ next_rx: /* Refresh hw_cons to see if there is new work */ if (sw_cons == hw_cons) { - hw_cons = bp->hw_rx_cons = - sblk->status_rx_quick_consumer_index0; - if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) - hw_cons++; + hw_cons = bnx2_get_hw_rx_cons(bp); rmb(); } } @@ -2622,7 +2625,7 @@ bnx2_has_work(struct bnx2 *bp) { struct status_block *sblk = bp->status_blk; - if ((sblk->status_rx_quick_consumer_index0 != bp->hw_rx_cons) || + if ((bnx2_get_hw_rx_cons(bp) != bp->rx_cons) || (sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons)) return 1; @@ -2655,7 +2658,7 @@ static int bnx2_poll_work(struct bnx2 *bp, int work_done, int budget) if (sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons) bnx2_tx_int(bp); - if (sblk->status_rx_quick_consumer_index0 != bp->hw_rx_cons) + if (bnx2_get_hw_rx_cons(bp) != bp->rx_cons) work_done += bnx2_rx_int(bp, budget - work_done); return work_done; @@ -4177,7 +4180,6 @@ bnx2_init_rx_ring(struct bnx2 *bp) ring_prod = prod = bp->rx_prod = 0; bp->rx_cons = 0; - bp->hw_rx_cons = 0; bp->rx_prod_bseq = 0; for (i = 0; i < bp->rx_max_ring; i++) { @@ -6685,8 +6687,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) } else if (CHIP_NUM(bp) == CHIP_NUM_5706 || CHIP_NUM(bp) == CHIP_NUM_5708) bp->phy_flags |= PHY_CRC_FIX_FLAG; - else if (CHIP_ID(bp) == CHIP_ID_5709_A0 || - CHIP_ID(bp) == CHIP_ID_5709_A1) + else if (CHIP_NUM(bp) == CHIP_NUM_5709 && + (CHIP_REV(bp) == CHIP_REV_Ax || + CHIP_REV(bp) == CHIP_REV_Bx)) bp->phy_flags |= PHY_DIS_EARLY_DAC_FLAG; if ((CHIP_ID(bp) == CHIP_ID_5708_A0) || diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 1dce0d1a258..30ba366608b 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6513,7 +6513,6 @@ struct bnx2 { u32 rx_prod_bseq; u16 rx_prod; u16 rx_cons; - u16 hw_rx_cons; u32 rx_csum; diff --git a/drivers/net/e100.c b/drivers/net/e100.c index e1c8a0d023e..2b06e4b4dab 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2737,8 +2737,9 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } - pci_disable_device(pdev); free_irq(pdev->irq, netdev); + + pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; @@ -2780,6 +2781,8 @@ static void e100_shutdown(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3cold, 0); } + free_irq(pdev->irq, netdev); + pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); } diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c index 5ff856d7590..fe3d8a621c3 100644 --- a/drivers/net/fs_enet/mac-scc.c +++ b/drivers/net/fs_enet/mac-scc.c @@ -149,7 +149,7 @@ static int setup_data(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); -#ifdef CONFIG_PPC_CPM_NEW_BINDING +#ifndef CONFIG_PPC_CPM_NEW_BINDING struct fs_platform_info *fpi = fep->fpi; fep->scc.idx = fs_get_scc_index(fpi->fs_no); diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index ed407c85708..b53f6b6491b 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -204,8 +204,10 @@ KERN_INFO " Further modifications by Keith Underwood <keithu@parl.clemson.edu> /* Condensed bus+endian portability operations. */ #if ADDRLEN == 64 #define cpu_to_leXX(addr) cpu_to_le64(addr) +#define leXX_to_cpu(addr) le64_to_cpu(addr) #else #define cpu_to_leXX(addr) cpu_to_le32(addr) +#define leXX_to_cpu(addr) le32_to_cpu(addr) #endif @@ -465,12 +467,12 @@ enum intr_status_bits { /* The Hamachi Rx and Tx buffer descriptors. */ struct hamachi_desc { - u32 status_n_length; + __le32 status_n_length; #if ADDRLEN == 64 u32 pad; - u64 addr; + __le64 addr; #else - u32 addr; + __le32 addr; #endif }; @@ -874,13 +876,13 @@ static int hamachi_open(struct net_device *dev) #if ADDRLEN == 64 /* writellll anyone ? */ - writel(cpu_to_le64(hmp->rx_ring_dma), ioaddr + RxPtr); - writel(cpu_to_le64(hmp->rx_ring_dma) >> 32, ioaddr + RxPtr + 4); - writel(cpu_to_le64(hmp->tx_ring_dma), ioaddr + TxPtr); - writel(cpu_to_le64(hmp->tx_ring_dma) >> 32, ioaddr + TxPtr + 4); + writel(hmp->rx_ring_dma, ioaddr + RxPtr); + writel(hmp->rx_ring_dma >> 32, ioaddr + RxPtr + 4); + writel(hmp->tx_ring_dma, ioaddr + TxPtr); + writel(hmp->tx_ring_dma >> 32, ioaddr + TxPtr + 4); #else - writel(cpu_to_le32(hmp->rx_ring_dma), ioaddr + RxPtr); - writel(cpu_to_le32(hmp->tx_ring_dma), ioaddr + TxPtr); + writel(hmp->rx_ring_dma, ioaddr + RxPtr); + writel(hmp->tx_ring_dma, ioaddr + TxPtr); #endif /* TODO: It would make sense to organize this as words since the card @@ -1019,8 +1021,8 @@ static inline int hamachi_tx(struct net_device *dev) skb = hmp->tx_skbuff[entry]; if (skb) { pci_unmap_single(hmp->pci_dev, - hmp->tx_ring[entry].addr, skb->len, - PCI_DMA_TODEVICE); + leXX_to_cpu(hmp->tx_ring[entry].addr), + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb(skb); hmp->tx_skbuff[entry] = NULL; } @@ -1071,10 +1073,10 @@ static void hamachi_tx_timeout(struct net_device *dev) { printk(KERN_DEBUG " Rx ring %p: ", hmp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)hmp->rx_ring[i].status_n_length); + printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length)); printk("\n"KERN_DEBUG" Tx ring %p: ", hmp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x", hmp->tx_ring[i].status_n_length); + printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length)); printk("\n"); } @@ -1099,14 +1101,15 @@ static void hamachi_tx_timeout(struct net_device *dev) struct sk_buff *skb; if (i >= TX_RING_SIZE - 1) - hmp->tx_ring[i].status_n_length = cpu_to_le32( - DescEndRing | - (hmp->tx_ring[i].status_n_length & 0x0000FFFF)); + hmp->tx_ring[i].status_n_length = + cpu_to_le32(DescEndRing) | + (hmp->tx_ring[i].status_n_length & + cpu_to_le32(0x0000ffff)); else - hmp->tx_ring[i].status_n_length &= 0x0000ffff; + hmp->tx_ring[i].status_n_length &= cpu_to_le32(0x0000ffff); skb = hmp->tx_skbuff[i]; if (skb){ - pci_unmap_single(hmp->pci_dev, hmp->tx_ring[i].addr, + pci_unmap_single(hmp->pci_dev, leXX_to_cpu(hmp->tx_ring[i].addr), skb->len, PCI_DMA_TODEVICE); dev_kfree_skb(skb); hmp->tx_skbuff[i] = NULL; @@ -1128,7 +1131,8 @@ static void hamachi_tx_timeout(struct net_device *dev) struct sk_buff *skb = hmp->rx_skbuff[i]; if (skb){ - pci_unmap_single(hmp->pci_dev, hmp->rx_ring[i].addr, + pci_unmap_single(hmp->pci_dev, + leXX_to_cpu(hmp->rx_ring[i].addr), hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb(skb); hmp->rx_skbuff[i] = NULL; @@ -1420,7 +1424,7 @@ static irqreturn_t hamachi_interrupt(int irq, void *dev_instance) /* Free the original skb. */ if (skb){ pci_unmap_single(hmp->pci_dev, - hmp->tx_ring[entry].addr, + leXX_to_cpu(hmp->tx_ring[entry].addr), skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_irq(skb); @@ -1500,11 +1504,11 @@ static int hamachi_rx(struct net_device *dev) if (desc_status & DescOwn) break; pci_dma_sync_single_for_cpu(hmp->pci_dev, - desc->addr, + leXX_to_cpu(desc->addr), hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); buf_addr = (u8 *) hmp->rx_skbuff[entry]->data; - frame_status = le32_to_cpu(get_unaligned((s32*)&(buf_addr[data_size - 12]))); + frame_status = le32_to_cpu(get_unaligned((__le32*)&(buf_addr[data_size - 12]))); if (hamachi_debug > 4) printk(KERN_DEBUG " hamachi_rx() status was %8.8x.\n", frame_status); @@ -1518,9 +1522,9 @@ static int hamachi_rx(struct net_device *dev) dev->name, desc, &hmp->rx_ring[hmp->cur_rx % RX_RING_SIZE]); printk(KERN_WARNING "%s: Oversized Ethernet frame -- next status %x/%x last status %x.\n", dev->name, - hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length & 0xffff0000, - hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length & 0x0000ffff, - hmp->rx_ring[(hmp->cur_rx-1) % RX_RING_SIZE].status_n_length); + le32_to_cpu(hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length) & 0xffff0000, + le32_to_cpu(hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length) & 0x0000ffff, + le32_to_cpu(hmp->rx_ring[(hmp->cur_rx-1) % RX_RING_SIZE].status_n_length)); hmp->stats.rx_length_errors++; } /* else Omit for prototype errata??? */ if (frame_status & 0x00380000) { @@ -1566,7 +1570,7 @@ static int hamachi_rx(struct net_device *dev) #endif skb_reserve(skb, 2); /* 16 byte align the IP header */ pci_dma_sync_single_for_cpu(hmp->pci_dev, - hmp->rx_ring[entry].addr, + leXX_to_cpu(hmp->rx_ring[entry].addr), hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); /* Call copy + cksum if available. */ @@ -1579,12 +1583,12 @@ static int hamachi_rx(struct net_device *dev) + entry*sizeof(*desc), pkt_len); #endif pci_dma_sync_single_for_device(hmp->pci_dev, - hmp->rx_ring[entry].addr, + leXX_to_cpu(hmp->rx_ring[entry].addr), hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); } else { pci_unmap_single(hmp->pci_dev, - hmp->rx_ring[entry].addr, + leXX_to_cpu(hmp->rx_ring[entry].addr), hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put(skb = hmp->rx_skbuff[entry], pkt_len); hmp->rx_skbuff[entry] = NULL; @@ -1787,21 +1791,21 @@ static int hamachi_close(struct net_device *dev) for (i = 0; i < RX_RING_SIZE; i++) { skb = hmp->rx_skbuff[i]; hmp->rx_ring[i].status_n_length = 0; - hmp->rx_ring[i].addr = 0xBADF00D0; /* An invalid address. */ if (skb) { pci_unmap_single(hmp->pci_dev, - hmp->rx_ring[i].addr, hmp->rx_buf_sz, - PCI_DMA_FROMDEVICE); + leXX_to_cpu(hmp->rx_ring[i].addr), + hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb(skb); hmp->rx_skbuff[i] = NULL; } + hmp->rx_ring[i].addr = cpu_to_leXX(0xBADF00D0); /* An invalid address. */ } for (i = 0; i < TX_RING_SIZE; i++) { skb = hmp->tx_skbuff[i]; if (skb) { pci_unmap_single(hmp->pci_dev, - hmp->tx_ring[i].addr, skb->len, - PCI_DMA_TODEVICE); + leXX_to_cpu(hmp->tx_ring[i].addr), + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb(skb); hmp->tx_skbuff[i] = NULL; } diff --git a/drivers/net/ibm_newemac/debug.c b/drivers/net/ibm_newemac/debug.c index a2fc660ca5d..86b756a3078 100644 --- a/drivers/net/ibm_newemac/debug.c +++ b/drivers/net/ibm_newemac/debug.c @@ -26,7 +26,7 @@ #include "core.h" -static spinlock_t emac_dbg_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(emac_dbg_lock); static void emac_desc_dump(struct emac_instance *p) { diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index c6355c00fd7..9081234ab45 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1168,6 +1168,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self) static int irda_usb_net_open(struct net_device *netdev) { struct irda_usb_cb *self; + unsigned long flags; char hwname[16]; int i; @@ -1177,13 +1178,16 @@ static int irda_usb_net_open(struct net_device *netdev) self = (struct irda_usb_cb *) netdev->priv; IRDA_ASSERT(self != NULL, return -1;); + spin_lock_irqsave(&self->lock, flags); /* Can only open the device if it's there */ if(!self->present) { + spin_unlock_irqrestore(&self->lock, flags); IRDA_WARNING("%s(), device not present!\n", __FUNCTION__); return -1; } if(self->needspatch) { + spin_unlock_irqrestore(&self->lock, flags); IRDA_WARNING("%s(), device needs patch\n", __FUNCTION__) ; return -EIO ; } @@ -1198,6 +1202,7 @@ static int irda_usb_net_open(struct net_device *netdev) /* To do *before* submitting Rx urbs and starting net Tx queue * Jean II */ self->netopen = 1; + spin_unlock_irqrestore(&self->lock, flags); /* * Now that everything should be initialized properly, diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c index 0b769192d4c..93916cf33f2 100644 --- a/drivers/net/irda/mcs7780.c +++ b/drivers/net/irda/mcs7780.c @@ -677,6 +677,8 @@ static int mcs_net_close(struct net_device *netdev) /* Stop transmit processing */ netif_stop_queue(netdev); + kfree_skb(mcs->rx_buff.skb); + /* kill and free the receive and transmit URBs */ usb_kill_urb(mcs->rx_urb); usb_free_urb(mcs->rx_urb); diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index 042bc2f0417..e59c485bc49 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -142,9 +142,6 @@ enum StirCtrl2Mask { }; enum StirFifoCtlMask { - FIFOCTL_EOF = 0x80, - FIFOCTL_UNDER = 0x40, - FIFOCTL_OVER = 0x20, FIFOCTL_DIR = 0x10, FIFOCTL_CLR = 0x08, FIFOCTL_EMPTY = 0x04, @@ -594,9 +591,10 @@ static int fifo_txwait(struct stir_cb *stir, int space) { int err; unsigned long count, status; + unsigned long prev_count = 0x1fff; /* Read FIFO status and count */ - for(;;) { + for (;; prev_count = count) { err = read_reg(stir, REG_FIFOCTL, stir->fifo_status, FIFO_REGS_SIZE); if (unlikely(err != FIFO_REGS_SIZE)) { @@ -629,6 +627,10 @@ static int fifo_txwait(struct stir_cb *stir, int space) if (space >= 0 && STIR_FIFO_SIZE - 4 > space + count) return 0; + /* queue confused */ + if (prev_count < count) + break; + /* estimate transfer time for remaining chars */ msleep((count * 8000) / stir->speed); } diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 3021234b1e1..bf9085fe035 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -320,10 +320,22 @@ ixgb_down(struct ixgb_adapter *adapter, boolean_t kill_watchdog) void ixgb_reset(struct ixgb_adapter *adapter) { + struct ixgb_hw *hw = &adapter->hw; - ixgb_adapter_stop(&adapter->hw); - if(!ixgb_init_hw(&adapter->hw)) + ixgb_adapter_stop(hw); + if (!ixgb_init_hw(hw)) DPRINTK(PROBE, ERR, "ixgb_init_hw failed.\n"); + + /* restore frame size information */ + IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT); + if (hw->max_frame_size > + IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) { + u32 ctrl0 = IXGB_READ_REG(hw, CTRL0); + if (!(ctrl0 & IXGB_CTRL0_JFE)) { + ctrl0 |= IXGB_CTRL0_JFE; + IXGB_WRITE_REG(hw, CTRL0, ctrl0); + } + } } /** diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index db6a97d1d7b..51bbd582f16 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1746,6 +1746,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"), + PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", 0xb4be14e3, 0x43ac239b, 0x0877b627), PCMCIA_DEVICE_NULL diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 121cb100f93..9d80f1cf73a 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3737,7 +3737,7 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) } /* Handle software interrupt used during MSI(X) test */ -static irqreturn_t __devinit s2io_test_intr(int irq, void *dev_id) +static irqreturn_t s2io_test_intr(int irq, void *dev_id) { struct s2io_nic *sp = dev_id; @@ -3748,7 +3748,7 @@ static irqreturn_t __devinit s2io_test_intr(int irq, void *dev_id) } /* Test interrupt path by forcing a a software IRQ */ -static int __devinit s2io_test_msi(struct s2io_nic *sp) +static int s2io_test_msi(struct s2io_nic *sp) { struct pci_dev *pdev = sp->pdev; struct XENA_dev_config __iomem *bar0 = sp->bar0; diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 720088396bb..7eab072ae79 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -474,7 +474,7 @@ static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping, static inline void sis190_make_unusable_by_asic(struct RxDesc *desc) { desc->PSize = 0x0; - desc->addr = 0xdeadbeef; + desc->addr = cpu_to_le32(0xdeadbeef); desc->size &= cpu_to_le32(RingEnd); wmb(); desc->status = 0x0; @@ -580,7 +580,7 @@ static int sis190_rx_interrupt(struct net_device *dev, struct RxDesc *desc = tp->RxDescRing + entry; u32 status; - if (desc->status & OWNbit) + if (le32_to_cpu(desc->status) & OWNbit) break; status = le32_to_cpu(desc->PSize); @@ -1381,7 +1381,7 @@ out: return rc; } -static void __devexit sis190_mii_remove(struct net_device *dev) +static void sis190_mii_remove(struct net_device *dev) { struct sis190_private *tp = netdev_priv(dev); @@ -1538,9 +1538,9 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, /* Get MAC address from EEPROM */ for (i = 0; i < MAC_ADDR_LEN / 2; i++) { - __le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); + u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); - ((u16 *)dev->dev_addr)[i] = le16_to_cpu(w); + ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(w); } sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo)); diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 6197afb3ed8..a74fc11a648 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -822,8 +822,13 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg); - /* Flush Rx MAC FIFO on any flow control or error */ - sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); + if (hw->chip_id == CHIP_ID_YUKON_XL) { + /* Hardware errata - clear flush mask */ + sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0); + } else { + /* Flush Rx MAC FIFO on any flow control or error */ + sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); + } /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */ reg = RX_GMF_FL_THR_DEF + 1; diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index d04e4fa3520..7defa63b9c7 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h @@ -76,7 +76,7 @@ -#if SMC_USE_PXA_DMA +#ifdef SMC_USE_PXA_DMA #define SMC_USE_DMA /* diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index bcc430bd9e4..6e00dc857af 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1742,7 +1742,7 @@ static void set_rx_mode(struct net_device *dev) if (vlan_group_get_device(np->vlgrp, i)) { if (vlan_count >= 32) break; - writew(cpu_to_be16(i), filter_addr); + writew(i, filter_addr); filter_addr += 16; vlan_count++; } diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index ff98f5d597f..0a6186d4a48 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -340,9 +340,9 @@ enum mac_ctrl1_bits { /* Note that using only 32 bit fields simplifies conversion to big-endian architectures. */ struct netdev_desc { - u32 next_desc; - u32 status; - struct desc_frag { u32 addr, length; } frag[1]; + __le32 next_desc; + __le32 status; + struct desc_frag { __le32 addr, length; } frag[1]; }; /* Bits in netdev_desc.status */ @@ -495,8 +495,8 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, goto err_out_res; for (i = 0; i < 3; i++) - ((u16 *)dev->dev_addr)[i] = - le16_to_cpu(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); + ((__le16 *)dev->dev_addr)[i] = + cpu_to_le16(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); dev->base_addr = (unsigned long)ioaddr; @@ -1090,8 +1090,8 @@ reset_tx (struct net_device *dev) skb = np->tx_skbuff[i]; if (skb) { pci_unmap_single(np->pci_dev, - np->tx_ring[i].frag[0].addr, skb->len, - PCI_DMA_TODEVICE); + le32_to_cpu(np->tx_ring[i].frag[0].addr), + skb->len, PCI_DMA_TODEVICE); if (irq) dev_kfree_skb_irq (skb); else @@ -1214,7 +1214,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) skb = np->tx_skbuff[entry]; /* Free the original skb. */ pci_unmap_single(np->pci_dev, - np->tx_ring[entry].frag[0].addr, + le32_to_cpu(np->tx_ring[entry].frag[0].addr), skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_irq (np->tx_skbuff[entry]); np->tx_skbuff[entry] = NULL; @@ -1233,7 +1233,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) skb = np->tx_skbuff[entry]; /* Free the original skb. */ pci_unmap_single(np->pci_dev, - np->tx_ring[entry].frag[0].addr, + le32_to_cpu(np->tx_ring[entry].frag[0].addr), skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_irq (np->tx_skbuff[entry]); np->tx_skbuff[entry] = NULL; @@ -1311,19 +1311,19 @@ static void rx_poll(unsigned long data) && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { skb_reserve(skb, 2); /* 16 byte align the IP header */ pci_dma_sync_single_for_cpu(np->pci_dev, - desc->frag[0].addr, + le32_to_cpu(desc->frag[0].addr), np->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len); pci_dma_sync_single_for_device(np->pci_dev, - desc->frag[0].addr, + le32_to_cpu(desc->frag[0].addr), np->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put(skb, pkt_len); } else { pci_unmap_single(np->pci_dev, - desc->frag[0].addr, + le32_to_cpu(desc->frag[0].addr), np->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put(skb = np->rx_skbuff[entry], pkt_len); @@ -1709,23 +1709,23 @@ static int netdev_close(struct net_device *dev) /* Free all the skbuffs in the Rx queue. */ for (i = 0; i < RX_RING_SIZE; i++) { np->rx_ring[i].status = 0; - np->rx_ring[i].frag[0].addr = 0xBADF00D0; /* An invalid address. */ skb = np->rx_skbuff[i]; if (skb) { pci_unmap_single(np->pci_dev, - np->rx_ring[i].frag[0].addr, np->rx_buf_sz, - PCI_DMA_FROMDEVICE); + le32_to_cpu(np->rx_ring[i].frag[0].addr), + np->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb(skb); np->rx_skbuff[i] = NULL; } + np->rx_ring[i].frag[0].addr = cpu_to_le32(0xBADF00D0); /* poison */ } for (i = 0; i < TX_RING_SIZE; i++) { np->tx_ring[i].next_desc = 0; skb = np->tx_skbuff[i]; if (skb) { pci_unmap_single(np->pci_dev, - np->tx_ring[i].frag[0].addr, skb->len, - PCI_DMA_TODEVICE); + le32_to_cpu(np->tx_ring[i].frag[0].addr), + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb(skb); np->tx_skbuff[i] = NULL; } diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 0f7626856a6..8d456e379a8 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3447,7 +3447,7 @@ static int ucc_geth_rx(struct ucc_geth_private *ugeth, u8 rxQ, int rx_work_limit u16 length, howmany = 0; u32 bd_status; u8 *bdBuffer; - struct net_device * dev; + struct net_device *dev; ugeth_vdbg("%s: IN", __FUNCTION__); diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h index d8343703991..1e45b2028a5 100644 --- a/drivers/net/ucc_geth_mii.h +++ b/drivers/net/ucc_geth_mii.h @@ -96,5 +96,5 @@ enum enet_tbi_mii_reg { int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum); int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int __init uec_mdio_init(void); -void __exit uec_mdio_exit(void); +void uec_mdio_exit(void); #endif /* __UEC_MII_H */ diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index 232ecba5340..61e24b7a45a 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -107,24 +107,24 @@ struct ppp_header { u8 address; u8 control; - u16 protocol; + __be16 protocol; }; #define PPP_HEADER_LEN sizeof (struct ppp_header) struct lcp_header { u8 type; u8 ident; - u16 len; + __be16 len; }; #define LCP_HEADER_LEN sizeof (struct lcp_header) struct cisco_packet { - u32 type; - u32 par1; - u32 par2; - u16 rel; - u16 time0; - u16 time1; + __be32 type; + __be32 par1; + __be32 par2; + __be16 rel; + __be16 time0; + __be16 time1; }; #define CISCO_PACKET_LEN 18 #define CISCO_BIG_PACKET_LEN 20 @@ -139,7 +139,7 @@ static struct sk_buff_head tx_queue; static void sppp_keepalive (unsigned long dummy); static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type, u8 ident, u16 len, void *data); -static void sppp_cisco_send (struct sppp *sp, int type, long par1, long par2); +static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2); static void sppp_lcp_input (struct sppp *sp, struct sk_buff *m); static void sppp_cisco_input (struct sppp *sp, struct sk_buff *m); static void sppp_ipcp_input (struct sppp *sp, struct sk_buff *m); @@ -447,7 +447,7 @@ static void sppp_keepalive (unsigned long dummy) sppp_cisco_send (sp, CISCO_KEEPALIVE_REQ, ++sp->pp_seq, sp->pp_rseq); else if (sp->lcp.state == LCP_STATE_OPENED) { - long nmagic = htonl (sp->lcp.magic); + __be32 nmagic = htonl (sp->lcp.magic); sp->lcp.echoid = ++sp->pp_seq; sppp_cp_send (sp, PPP_LCP, LCP_ECHO_REQ, sp->lcp.echoid, 4, &nmagic); @@ -667,7 +667,7 @@ badreq: dev->name, len); break; } - if (ntohl (*(long*)(h+1)) == sp->lcp.magic) { + if (ntohl (*(__be32*)(h+1)) == sp->lcp.magic) { /* Line loopback mode detected. */ printk (KERN_WARNING "%s: loopback\n", dev->name); if_down (dev); @@ -680,7 +680,7 @@ badreq: sppp_lcp_open (sp); break; } - *(long*)(h+1) = htonl (sp->lcp.magic); + *(__be32 *)(h+1) = htonl (sp->lcp.magic); sppp_cp_send (sp, PPP_LCP, LCP_ECHO_REPLY, h->ident, len-4, h+1); break; case LCP_ECHO_REPLY: @@ -692,7 +692,7 @@ badreq: dev->name, len); break; } - if (ntohl (*(long*)(h+1)) != sp->lcp.magic) + if (ntohl(*(__be32 *)(h+1)) != sp->lcp.magic) sp->pp_alivecnt = 0; break; } @@ -765,7 +765,7 @@ static void sppp_cisco_input (struct sppp *sp, struct sk_buff *skb) { struct in_device *in_dev; struct in_ifaddr *ifa; - __be32 addr = 0, mask = ~0; /* FIXME: is the mask correct? */ + __be32 addr = 0, mask = htonl(~0U); /* FIXME: is the mask correct? */ #ifdef CONFIG_INET rcu_read_lock(); if ((in_dev = __in_dev_get_rcu(dev)) != NULL) @@ -782,8 +782,7 @@ static void sppp_cisco_input (struct sppp *sp, struct sk_buff *skb) } rcu_read_unlock(); #endif - /* I hope both addr and mask are in the net order */ - sppp_cisco_send (sp, CISCO_ADDR_REPLY, addr, mask); + sppp_cisco_send (sp, CISCO_ADDR_REPLY, ntohl(addr), ntohl(mask)); break; } } @@ -844,7 +843,7 @@ static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type, * Send Cisco keepalive packet. */ -static void sppp_cisco_send (struct sppp *sp, int type, long par1, long par2) +static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2) { struct ppp_header *h; struct cisco_packet *ch; @@ -868,7 +867,7 @@ static void sppp_cisco_send (struct sppp *sp, int type, long par1, long par2) ch->type = htonl (type); ch->par1 = htonl (par1); ch->par2 = htonl (par2); - ch->rel = -1; + ch->rel = htons(0xffff); ch->time0 = htons ((u16) (t >> 16)); ch->time1 = htons ((u16) t); diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 2b733c58291..5583719a0dc 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -264,6 +264,7 @@ config IPW2200_DEBUG config LIBERTAS tristate "Marvell 8xxx Libertas WLAN driver support" depends on WLAN_80211 + select WIRELESS_EXT select IEEE80211 select FW_LOADER ---help--- diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index 19e588582c7..6c0e2b9f776 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -163,6 +163,9 @@ static void b43_map_led(struct b43_wldev *dev, b43_register_led(dev, &dev->led_radio, name, b43_rfkill_led_name(dev), led_index, activelow); + /* Sync the RF-kill LED state with the switch state. */ + if (dev->radio_hw_enable) + b43_led_turn_on(dev, led_index, activelow); break; case B43_LED_WEIRD: case B43_LED_ASSOC: @@ -232,4 +235,5 @@ void b43_leds_exit(struct b43_wldev *dev) b43_unregister_led(&dev->led_tx); b43_unregister_led(&dev->led_rx); b43_unregister_led(&dev->led_assoc); + b43_unregister_led(&dev->led_radio); } diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b45eecc53c4..1c93b4f4bfe 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2163,7 +2163,6 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) static void b43_chip_exit(struct b43_wldev *dev) { b43_radio_turn_off(dev, 1); - b43_leds_exit(dev); b43_gpio_cleanup(dev); /* firmware is released later */ } @@ -2191,11 +2190,10 @@ static int b43_chip_init(struct b43_wldev *dev) err = b43_gpio_init(dev); if (err) goto out; /* firmware is released later */ - b43_leds_init(dev); err = b43_upload_initvals(dev); if (err) - goto err_leds_exit; + goto err_gpio_clean; b43_radio_turn_on(dev); b43_write16(dev, 0x03E6, 0x0000); @@ -2271,8 +2269,7 @@ out: err_radio_off: b43_radio_turn_off(dev, 1); -err_leds_exit: - b43_leds_exit(dev); +err_gpio_clean: b43_gpio_cleanup(dev); return err; } @@ -3273,10 +3270,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev) return; b43_set_status(dev, B43_STAT_UNINIT); - mutex_unlock(&dev->wl->mutex); - b43_rfkill_exit(dev); - mutex_lock(&dev->wl->mutex); - + b43_leds_exit(dev); b43_rng_exit(dev->wl); b43_pio_free(dev); b43_dma_free(dev); @@ -3405,12 +3399,12 @@ static int b43_wireless_core_init(struct b43_wldev *dev) memset(wl->mac_addr, 0, ETH_ALEN); b43_upload_card_macaddress(dev); b43_security_init(dev); - b43_rfkill_init(dev); b43_rng_init(wl); b43_set_status(dev, B43_STAT_INITIALIZED); - out: + b43_leds_init(dev); +out: return err; err_chip_exit: @@ -3499,6 +3493,10 @@ static int b43_start(struct ieee80211_hw *hw) int did_init = 0; int err = 0; + /* First register RFkill. + * LEDs that are registered later depend on it. */ + b43_rfkill_init(dev); + mutex_lock(&wl->mutex); if (b43_status(dev) < B43_STAT_INITIALIZED) { @@ -3528,6 +3526,8 @@ static void b43_stop(struct ieee80211_hw *hw) struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; + b43_rfkill_exit(dev); + mutex_lock(&wl->mutex); if (b43_status(dev) >= B43_STAT_STARTED) b43_wireless_core_stop(dev); diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 9b1f905ffbf..98cf70c5fd4 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -25,6 +25,8 @@ #include "rfkill.h" #include "b43.h" +#include <linux/kmod.h> + /* Returns TRUE, if the radio is enabled in hardware. */ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) @@ -50,7 +52,10 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) bool report_change = 0; mutex_lock(&wl->mutex); - B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED); + if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) { + mutex_unlock(&wl->mutex); + return; + } enabled = b43_is_hw_radio_enabled(dev); if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; @@ -60,8 +65,12 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) } mutex_unlock(&wl->mutex); - if (unlikely(report_change)) - input_report_key(poll_dev->input, KEY_WLAN, enabled); + /* send the radio switch event to the system - note both a key press + * and a release are required */ + if (unlikely(report_change)) { + input_report_key(poll_dev->input, KEY_WLAN, 1); + input_report_key(poll_dev->input, KEY_WLAN, 0); + } } /* Called when the RFKILL toggled in software. */ @@ -69,13 +78,15 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) { struct b43_wldev *dev = data; struct b43_wl *wl = dev->wl; - int err = 0; + int err = -EBUSY; if (!wl->rfkill.registered) return 0; mutex_lock(&wl->mutex); - B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED); + if (b43_status(dev) < B43_STAT_INITIALIZED) + goto out_unlock; + err = 0; switch (state) { case RFKILL_STATE_ON: if (!dev->radio_hw_enable) { @@ -133,9 +144,25 @@ void b43_rfkill_init(struct b43_wldev *dev) rfk->poll_dev->poll = b43_rfkill_poll; rfk->poll_dev->poll_interval = 1000; /* msecs */ + rfk->poll_dev->input->name = rfk->name; + rfk->poll_dev->input->id.bustype = BUS_HOST; + rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor; + rfk->poll_dev->input->evbit[0] = BIT(EV_KEY); + set_bit(KEY_WLAN, rfk->poll_dev->input->keybit); + err = rfkill_register(rfk->rfkill); if (err) goto err_free_polldev; + +#ifdef CONFIG_RFKILL_INPUT_MODULE + /* B43 RF-kill isn't useful without the rfkill-input subsystem. + * Try to load the module. */ + err = request_module("rfkill-input"); + if (err) + b43warn(wl, "Failed to load the rfkill-input module. " + "The built-in radio LED will not work.\n"); +#endif /* CONFIG_RFKILL_INPUT */ + err = input_register_polled_device(rfk->poll_dev); if (err) goto err_unreg_rfk; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c index 35dbe455451..76e9dd843fa 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c @@ -219,7 +219,7 @@ static ssize_t tsf_write_file(struct file *file, const char __user *user_buf, ssize_t buf_size; ssize_t res; unsigned long flags; - u64 tsf; + unsigned long long tsf; buf_size = min(count, sizeof (really_big_buffer) - 1); down(&big_buffer_sem); diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 54f44e5473c..da51f477e9d 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -10751,7 +10751,7 @@ static void ipw_bg_link_down(struct work_struct *work) mutex_unlock(&priv->mutex); } -static int ipw_setup_deferred_work(struct ipw_priv *priv) +static int __devinit ipw_setup_deferred_work(struct ipw_priv *priv) { int ret = 0; @@ -11600,7 +11600,8 @@ static void ipw_prom_free(struct ipw_priv *priv) #endif -static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +static int __devinit ipw_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { int err = 0; struct net_device *net_dev; @@ -11767,7 +11768,7 @@ static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return err; } -static void ipw_pci_remove(struct pci_dev *pdev) +static void __devexit ipw_pci_remove(struct pci_dev *pdev) { struct ipw_priv *priv = pci_get_drvdata(pdev); struct list_head *p, *q; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4bdf237f6ad..3d1da0759b9 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4743,8 +4743,10 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) * when we loaded driver, and is now set to "enable". * After we're Alive, RF_KILL gets handled by * iwl_rx_card_state_notif() */ - if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) + if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) { + clear_bit(STATUS_RF_KILL_HW, &priv->status); queue_work(priv->workqueue, &priv->restart); + } handled |= CSR_INT_BIT_RF_KILL; } @@ -6171,6 +6173,7 @@ static void iwl_alive_start(struct iwl_priv *priv) mutex_lock(&priv->mutex); if (rc) { + iwl_rate_control_unregister(priv->hw); IWL_ERROR("Failed to register network " "device (error %d)\n", rc); return; diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 8f85564ec6f..b54fe5e6d52 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -5059,8 +5059,10 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) * when we loaded driver, and is now set to "enable". * After we're Alive, RF_KILL gets handled by * iwl_rx_card_state_notif() */ - if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) + if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) { + clear_bit(STATUS_RF_KILL_HW, &priv->status); queue_work(priv->workqueue, &priv->restart); + } handled |= CSR_INT_BIT_RF_KILL; } @@ -6527,6 +6529,7 @@ static void iwl_alive_start(struct iwl_priv *priv) mutex_lock(&priv->mutex); if (rc) { + iwl_rate_control_unregister(priv->hw); IWL_ERROR("Failed to register network " "device (error %d)\n", rc); return; diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index a903645e157..5298a8bf112 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -1130,6 +1130,8 @@ static void zd_mac_rx(struct zd_mac *mac, struct sk_buff *skb) __skb_trim(skb, skb->len - (IEEE80211_FCS_LEN + sizeof(struct rx_status))); + ZD_ASSERT(IS_ALIGNED((unsigned long)skb->data, 4)); + update_qual_rssi(mac, skb->data, skb->len, stats.signal, status->signal_strength); @@ -1166,15 +1168,19 @@ static void do_rx(unsigned long mac_ptr) int zd_mac_rx_irq(struct zd_mac *mac, const u8 *buffer, unsigned int length) { struct sk_buff *skb; + unsigned int reserved = + ALIGN(max_t(unsigned int, + sizeof(struct zd_rt_hdr), ZD_PLCP_HEADER_SIZE), 4) - + ZD_PLCP_HEADER_SIZE; - skb = dev_alloc_skb(sizeof(struct zd_rt_hdr) + length); + skb = dev_alloc_skb(reserved + length); if (!skb) { struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); dev_warn(zd_mac_dev(mac), "Could not allocate skb.\n"); ieee->stats.rx_dropped++; return -ENOMEM; } - skb_reserve(skb, sizeof(struct zd_rt_hdr)); + skb_reserve(skb, reserved); memcpy(__skb_put(skb, length), buffer, length); skb_queue_tail(&mac->rx_queue, skb); tasklet_schedule(&mac->rx_tasklet); diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c index ed82e41210d..d950fc34320 100644 --- a/drivers/parport/procfs.c +++ b/drivers/parport/procfs.c @@ -384,7 +384,7 @@ parport_device_sysctl_template = { { .procname = "timeslice", .data = NULL, - .maxlen = sizeof(int), + .maxlen = sizeof(unsigned long), .mode = 0644, .proc_handler = &proc_doulongvec_ms_jiffies_minmax, .extra1 = (void*) &parport_min_timeslice_value, diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index c2f8a78c894..2f75d695eed 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -276,7 +276,8 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK); if (sz) { res->flags = (l & IORESOURCE_ROM_ENABLE) | - IORESOURCE_MEM | IORESOURCE_READONLY; + IORESOURCE_MEM | IORESOURCE_PREFETCH | + IORESOURCE_READONLY | IORESOURCE_CACHEABLE; res->start = l & PCI_ROM_ADDRESS_MASK; res->end = res->start + (unsigned long) sz; } diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index a0aca46ce87..56230dbd347 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -89,7 +89,7 @@ DECLARE_RWSEM(pcmcia_socket_list_rwsem); EXPORT_SYMBOL(pcmcia_socket_list_rwsem); -/** +/* * Low-level PCMCIA socket drivers need to register with the PCCard * core using pcmcia_register_socket. * @@ -174,6 +174,7 @@ static int pccardd(void *__skt); /** * pcmcia_register_socket - add a new pcmcia socket device + * @socket: the &socket to register */ int pcmcia_register_socket(struct pcmcia_socket *socket) { @@ -268,6 +269,7 @@ EXPORT_SYMBOL(pcmcia_register_socket); /** * pcmcia_unregister_socket - remove a pcmcia socket device + * @socket: the &socket to unregister */ void pcmcia_unregister_socket(struct pcmcia_socket *socket) { @@ -311,7 +313,7 @@ struct pcmcia_socket * pcmcia_get_socket_by_nr(unsigned int nr) } EXPORT_SYMBOL(pcmcia_get_socket_by_nr); -/** +/* * The central event handler. Send_event() sends an event to the * 16-bit subsystem, which then calls the relevant device drivers. * Parse_events() interprets the event bits from @@ -380,7 +382,7 @@ static int socket_reset(struct pcmcia_socket *skt) return CS_GENERAL_FAILURE; } -/** +/* * socket_setup() and socket_shutdown() are called by the main event handler * when card insertion and removal events are received. * socket_setup() turns on socket power and resets the socket, in two stages. diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 7bf78c12789..5cf89a91da1 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -320,6 +320,7 @@ pcmcia_create_newid_file(struct pcmcia_driver *drv) /** * pcmcia_register_driver - register a PCMCIA driver with the bus core + * @driver: the &driver being registered * * Registers a PCMCIA driver with the PCMCIA bus core. */ @@ -354,6 +355,7 @@ EXPORT_SYMBOL(pcmcia_register_driver); /** * pcmcia_unregister_driver - unregister a PCMCIA driver with the bus core + * @driver: the &driver being unregistered */ void pcmcia_unregister_driver(struct pcmcia_driver *driver) { @@ -840,8 +842,8 @@ static void pcmcia_bus_rescan(struct pcmcia_socket *skt, int new_cis) /** * pcmcia_load_firmware - load CIS from userspace if device-provided is broken - * @dev - the pcmcia device which needs a CIS override - * @filename - requested filename in /lib/firmware/ + * @dev: the pcmcia device which needs a CIS override + * @filename: requested filename in /lib/firmware/ * * This uses the in-kernel firmware loading mechanism to use a "fake CIS" if * the one provided by the card is broken. The firmware files reside in diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h index 62e9ebf967f..d29657bf1b4 100644 --- a/drivers/pcmcia/ti113x.h +++ b/drivers/pcmcia/ti113x.h @@ -874,7 +874,7 @@ static int ti1250_override(struct yenta_socket *socket) */ #ifdef CONFIG_YENTA_ENE_TUNE -/** +/* * set/clear various test bits: * Defaults to clear the bit. * - mask (u8) defines what bits to change diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 20853a03202..0ab1fb65cdc 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -48,7 +48,7 @@ MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only #define to_cycles(ns) ((ns)/120) #define to_ns(cycles) ((cycles)*120) -/** +/* * yenta PCI irq probing. * currently only used in the TI/EnE initialization code */ @@ -888,7 +888,7 @@ static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mas } -/** +/* * yenta PCI irq probing. * currently only used in the TI/EnE initialization code */ @@ -1012,7 +1012,7 @@ static void yenta_config_init(struct yenta_socket *socket) * invisible during PCI scans because of a misconfigured subordinate number * of the parent brige - some BIOSes seem to be too lazy to set it right. * Does the fixup carefully by checking how far it can go without conflicts. - * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. + * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. */ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) { diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c index 2999214ca53..d3b9b14267a 100644 --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c @@ -225,18 +225,12 @@ static int __init at32_rtc_probe(struct platform_device *pdev) goto out; } - ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc); - if (ret) { - dev_dbg(&pdev->dev, "could not request irq %d\n", irq); - goto out; - } - rtc->irq = irq; rtc->regs = ioremap(regs->start, regs->end - regs->start + 1); if (!rtc->regs) { ret = -ENOMEM; dev_dbg(&pdev->dev, "could not map I/O memory\n"); - goto out_free_irq; + goto out; } spin_lock_init(&rtc->lock); @@ -253,12 +247,18 @@ static int __init at32_rtc_probe(struct platform_device *pdev) | RTC_BIT(CTRL_EN)); } + ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc); + if (ret) { + dev_dbg(&pdev->dev, "could not request irq %d\n", irq); + goto out_iounmap; + } + rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, &at32_rtc_ops, THIS_MODULE); if (IS_ERR(rtc->rtc)) { dev_dbg(&pdev->dev, "could not register rtc device\n"); ret = PTR_ERR(rtc->rtc); - goto out_iounmap; + goto out_free_irq; } platform_set_drvdata(pdev, rtc); @@ -268,10 +268,10 @@ static int __init at32_rtc_probe(struct platform_device *pdev) return 0; -out_iounmap: - iounmap(rtc->regs); out_free_irq: free_irq(irq, rtc); +out_iounmap: + iounmap(rtc->regs); out: kfree(rtc); return ret; diff --git a/drivers/s390/net/ctcmain.c b/drivers/s390/net/ctcmain.c index 97adc701a81..77a503139e3 100644 --- a/drivers/s390/net/ctcmain.c +++ b/drivers/s390/net/ctcmain.c @@ -478,14 +478,14 @@ ctc_unpack_skb(struct channel *ch, struct sk_buff *pskb) skb->dev = pskb->dev; skb->protocol = pskb->protocol; pskb->ip_summed = CHECKSUM_UNNECESSARY; - netif_rx_ni(skb); /** - * Successful rx; reset logflags + * reset logflags */ ch->logflags = 0; - dev->last_rx = jiffies; privptr->stats.rx_packets++; privptr->stats.rx_bytes += skb->len; + netif_rx_ni(skb); + dev->last_rx = jiffies; if (len > 0) { skb_pull(pskb, header->length); if (skb_tailroom(pskb) < LL_HEADER_LENGTH) { diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index 4d18d6419dd..c7ea9381db9 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -639,14 +639,14 @@ static void netiucv_unpack_skb(struct iucv_connection *conn, skb->dev = pskb->dev; skb->protocol = pskb->protocol; pskb->ip_summed = CHECKSUM_UNNECESSARY; + privptr->stats.rx_packets++; + privptr->stats.rx_bytes += skb->len; /* * Since receiving is always initiated from a tasklet (in iucv.c), * we must use netif_rx_ni() instead of netif_rx() */ netif_rx_ni(skb); dev->last_rx = jiffies; - privptr->stats.rx_packets++; - privptr->stats.rx_bytes += skb->len; skb_pull(pskb, header->next); skb_put(pskb, NETIUCV_HDRLEN); } diff --git a/drivers/sbus/char/cpwatchdog.c b/drivers/sbus/char/cpwatchdog.c index 7b5773d8821..a4e75814366 100644 --- a/drivers/sbus/char/cpwatchdog.c +++ b/drivers/sbus/char/cpwatchdog.c @@ -154,7 +154,7 @@ struct wd_device { }; static struct wd_device wd_dev = { - 0, SPIN_LOCK_UNLOCKED, 0, 0, 0, 0, + 0, __SPIN_LOCK_UNLOCKED(wd_dev.lock), 0, 0, 0, 0, }; static struct timer_list wd_timer; diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 8258506ba7d..b31d1c95c9f 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -173,20 +173,20 @@ static struct pci_device_id dptids[] = { }; MODULE_DEVICE_TABLE(pci,dptids); -static void adpt_exit(void); - -static int adpt_detect(void) +static int adpt_detect(struct scsi_host_template* sht) { struct pci_dev *pDev = NULL; adpt_hba* pHba; + adpt_init(); + PINFO("Detecting Adaptec I2O RAID controllers...\n"); /* search for all Adatpec I2O RAID cards */ while ((pDev = pci_get_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) { if(pDev->device == PCI_DPT_DEVICE_ID || pDev->device == PCI_DPT_RAPTOR_DEVICE_ID){ - if(adpt_install_hba(pDev) ){ + if(adpt_install_hba(sht, pDev) ){ PERROR("Could not Init an I2O RAID device\n"); PERROR("Will not try to detect others.\n"); return hba_count-1; @@ -248,33 +248,34 @@ rebuild_sys_tab: } for (pHba = hba_chain; pHba; pHba = pHba->next) { - if (adpt_scsi_register(pHba) < 0) { + if( adpt_scsi_register(pHba,sht) < 0){ adpt_i2o_delete_hba(pHba); continue; } pHba->initialized = TRUE; pHba->state &= ~DPTI_STATE_RESET; - scsi_scan_host(pHba->host); } // Register our control device node // nodes will need to be created in /dev to access this // the nodes can not be created from within the driver if (hba_count && register_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER, &adpt_fops)) { - adpt_exit(); + adpt_i2o_sys_shutdown(); return 0; } return hba_count; } -static int adpt_release(adpt_hba *pHba) +/* + * scsi_unregister will be called AFTER we return. + */ +static int adpt_release(struct Scsi_Host *host) { - struct Scsi_Host *shost = pHba->host; - scsi_remove_host(shost); + adpt_hba* pHba = (adpt_hba*) host->hostdata[0]; // adpt_i2o_quiesce_hba(pHba); adpt_i2o_delete_hba(pHba); - scsi_host_put(shost); + scsi_unregister(host); return 0; } @@ -881,7 +882,7 @@ static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p) #endif -static int adpt_install_hba(struct pci_dev* pDev) +static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) { adpt_hba* pHba = NULL; @@ -905,8 +906,7 @@ static int adpt_install_hba(struct pci_dev* pDev) } pci_set_master(pDev); - if (pci_set_dma_mask(pDev, DMA_64BIT_MASK) && - pci_set_dma_mask(pDev, DMA_32BIT_MASK)) + if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) return -EINVAL; base_addr0_phys = pci_resource_start(pDev,0); @@ -1028,6 +1028,8 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) mutex_lock(&adpt_configuration_lock); + // scsi_unregister calls our adpt_release which + // does a quiese if(pHba->host){ free_irq(pHba->host->irq, pHba); } @@ -1079,6 +1081,17 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) } +static int adpt_init(void) +{ + printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n"); +#ifdef REBOOT_NOTIFIER + register_reboot_notifier(&adpt_reboot_notifier); +#endif + + return 0; +} + + static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun) { struct adpt_device* d; @@ -2164,6 +2177,37 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d } +static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht) +{ + struct Scsi_Host *host = NULL; + + host = scsi_register(sht, sizeof(adpt_hba*)); + if (host == NULL) { + printk ("%s: scsi_register returned NULL\n",pHba->name); + return -1; + } + host->hostdata[0] = (unsigned long)pHba; + pHba->host = host; + + host->irq = pHba->pDev->irq; + /* no IO ports, so don't have to set host->io_port and + * host->n_io_port + */ + host->io_port = 0; + host->n_io_port = 0; + /* see comments in scsi_host.h */ + host->max_id = 16; + host->max_lun = 256; + host->max_channel = pHba->top_scsi_channel + 1; + host->cmd_per_lun = 1; + host->unique_id = (uint) pHba; + host->sg_tablesize = pHba->sg_tablesize; + host->can_queue = pHba->post_fifo_size; + + return 0; +} + + static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) { adpt_hba* pHba; @@ -3279,10 +3323,12 @@ static static void adpt_delay(int millisec) #endif -static struct scsi_host_template adpt_template = { +static struct scsi_host_template driver_template = { .name = "dpt_i2o", .proc_name = "dpt_i2o", .proc_info = adpt_proc_info, + .detect = adpt_detect, + .release = adpt_release, .info = adpt_info, .queuecommand = adpt_queue, .eh_abort_handler = adpt_abort, @@ -3297,62 +3343,5 @@ static struct scsi_host_template adpt_template = { .use_clustering = ENABLE_CLUSTERING, .use_sg_chaining = ENABLE_SG_CHAINING, }; - -static s32 adpt_scsi_register(adpt_hba* pHba) -{ - struct Scsi_Host *host; - - host = scsi_host_alloc(&adpt_template, sizeof(adpt_hba*)); - if (host == NULL) { - printk ("%s: scsi_host_alloc returned NULL\n",pHba->name); - return -1; - } - host->hostdata[0] = (unsigned long)pHba; - pHba->host = host; - - host->irq = pHba->pDev->irq; - /* no IO ports, so don't have to set host->io_port and - * host->n_io_port - */ - host->io_port = 0; - host->n_io_port = 0; - /* see comments in scsi_host.h */ - host->max_id = 16; - host->max_lun = 256; - host->max_channel = pHba->top_scsi_channel + 1; - host->cmd_per_lun = 1; - host->unique_id = (uint) pHba; - host->sg_tablesize = pHba->sg_tablesize; - host->can_queue = pHba->post_fifo_size; - - if (scsi_add_host(host, &pHba->pDev->dev)) { - scsi_host_put(host); - return -1; - } - - return 0; -} - -static int __init adpt_init(void) -{ - int count; - - printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n"); -#ifdef REBOOT_NOTIFIER - register_reboot_notifier(&adpt_reboot_notifier); -#endif - - count = adpt_detect(); - - return count > 0 ? 0 : -ENODEV; -} - -static void adpt_exit(void) -{ - while (hba_chain) - adpt_release(hba_chain); -} - -module_init(adpt_init); -module_exit(adpt_exit); +#include "scsi_module.c" MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h index 0892f6c7031..fd79068c586 100644 --- a/drivers/scsi/dpti.h +++ b/drivers/scsi/dpti.h @@ -28,9 +28,11 @@ * SCSI interface function Prototypes */ +static int adpt_detect(struct scsi_host_template * sht); static int adpt_queue(struct scsi_cmnd * cmd, void (*cmdcomplete) (struct scsi_cmnd *)); static int adpt_abort(struct scsi_cmnd * cmd); static int adpt_reset(struct scsi_cmnd* cmd); +static int adpt_release(struct Scsi_Host *host); static int adpt_slave_configure(struct scsi_device *); static const char *adpt_info(struct Scsi_Host *pSHost); @@ -47,6 +49,8 @@ static int adpt_device_reset(struct scsi_cmnd* cmd); #define DPT_DRIVER_NAME "Adaptec I2O RAID" +#ifndef HOSTS_C + #include "dpt/sys_info.h" #include <linux/wait.h> #include "dpt/dpti_i2o.h" @@ -285,7 +289,7 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba); static s32 adpt_i2o_hrt_get(adpt_hba* pHba); static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice); static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd); -static s32 adpt_scsi_register(adpt_hba* pHba); +static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht); static s32 adpt_hba_reset(adpt_hba* pHba); static s32 adpt_i2o_reset_hba(adpt_hba* pHba); static s32 adpt_rescan(adpt_hba* pHba); @@ -295,7 +299,7 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba); static void adpt_inquiry(adpt_hba* pHba); static void adpt_fail_posted_scbs(adpt_hba* pHba); static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun); -static int adpt_install_hba(struct pci_dev* pDev) ; +static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) ; static int adpt_i2o_online_hba(adpt_hba* pHba); static void adpt_i2o_post_wait_complete(u32, int); static int adpt_i2o_systab_send(adpt_hba* pHba); @@ -339,4 +343,5 @@ static void adpt_i386_info(sysInfo_S* si); #define FW_DEBUG_BLED_OFFSET 8 #define FW_DEBUG_FLAGS_NO_HEADERS_B 0x01 +#endif /* !HOSTS_C */ #endif /* _DPT_H */ diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index 4ed3a529706..bfdee596889 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -2026,8 +2026,8 @@ static void esp_reset_cleanup(struct esp *esp) tp->flags |= ESP_TGT_CHECK_NEGO; if (tp->starget) - starget_for_each_device(tp->starget, NULL, - esp_clear_hold); + __starget_for_each_device(tp->starget, NULL, + esp_clear_hold); } esp->flags &= ~ESP_FLAG_RESETTING; } diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 7a835a35f21..9706de9d98d 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -242,6 +242,11 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign } } +static void ide_scsi_hex_dump(u8 *data, int len) +{ + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0); +} + static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); @@ -272,8 +277,7 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd; if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: queue cmd = ", drive->name); - print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, pc->c, - 6, 0); + ide_scsi_hex_dump(pc->c, 6); } rq->rq_disk = scsi->disk; return ide_do_drive_cmd(drive, rq, ide_preempt); @@ -328,8 +332,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer; if (log) { printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number); - print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, - pc->buffer, 16, 0); + ide_scsi_hex_dump(pc->buffer, 16); } memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE); kfree(pc->buffer); @@ -808,12 +811,10 @@ static int idescsi_queue (struct scsi_cmnd *cmd, if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); - print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, - cmd->cmnd, cmd->cmd_len, 0); + ide_scsi_hex_dump(cmd->cmnd, cmd->cmd_len); if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) { printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number); - print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, - pc->c, 12, 0); + ide_scsi_hex_dump(pc->c, 12); } } diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index 4c4465d39a1..01bf0189367 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -2616,6 +2616,7 @@ static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * c scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) { sg->data = cpu_to_le32((u32)sg_dma_address(sglist)); total_len += sg->len = cpu_to_le32((u32)sg_dma_len(sglist)); + ++sg; } cblk->buflen = (scsi_bufflen(cmnd) > total_len) ? @@ -2867,6 +2868,7 @@ static int initio_probe_one(struct pci_dev *pdev, } host = (struct initio_host *)shost->hostdata; memset(host, 0, sizeof(struct initio_host)); + host->addr = pci_resource_start(pdev, 0); if (!request_region(host->addr, 256, "i91u")) { printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr); diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 19294882245..0fb1709ce5e 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -896,11 +896,11 @@ EXPORT_SYMBOL(__scsi_iterate_devices); * starget_for_each_device - helper to walk all devices of a target * @starget: target whose devices we want to iterate over. * - * This traverses over each devices of @shost. The devices have + * This traverses over each device of @starget. The devices have * a reference that must be released by scsi_host_put when breaking * out of the loop. */ -void starget_for_each_device(struct scsi_target *starget, void * data, +void starget_for_each_device(struct scsi_target *starget, void *data, void (*fn)(struct scsi_device *, void *)) { struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); @@ -915,6 +915,33 @@ void starget_for_each_device(struct scsi_target *starget, void * data, EXPORT_SYMBOL(starget_for_each_device); /** + * __starget_for_each_device - helper to walk all devices of a target + * (UNLOCKED) + * @starget: target whose devices we want to iterate over. + * + * This traverses over each device of @starget. It does _not_ + * take a reference on the scsi_device, so the whole loop must be + * protected by shost->host_lock. + * + * Note: The only reason why drivers would want to use this is because + * they need to access the device list in irq context. Otherwise you + * really want to use starget_for_each_device instead. + **/ +void __starget_for_each_device(struct scsi_target *starget, void *data, + void (*fn)(struct scsi_device *, void *)) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct scsi_device *sdev; + + __shost_for_each_device(sdev, shost) { + if ((sdev->channel == starget->channel) && + (sdev->id == starget->id)) + fn(sdev, data); + } +} +EXPORT_SYMBOL(__starget_for_each_device); + +/** * __scsi_device_lookup_by_target - find a device given the target (UNLOCKED) * @starget: SCSI target pointer * @lun: SCSI Logical Unit Number diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 98dfd6ea209..328c47c6aeb 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -3611,6 +3611,7 @@ static struct st_buffer * tb->dma = need_dma; tb->buffer_size = got; + sg_init_table(tb->sg, max_sg); return tb; } diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 0f74aba5b23..9e0908d1981 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1243,7 +1243,7 @@ static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev) * Free O/S specific resources. */ if (pdev->irq) - free_irq(pdev->irq, np); + free_irq(pdev->irq, np->s.host); if (np->s.ioaddr) pci_iounmap(pdev, np->s.ioaddr); if (np->s.ramaddr) diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 463f119f20e..254bdaeb35f 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -2791,7 +2791,7 @@ irqreturn_t sym_interrupt(struct Scsi_Host *shost) istat = INB(np, nc_istat); if (istat & INTF) { OUTB(np, nc_istat, (istat & SIGP) | INTF | np->istat_sem); - istat = INB(np, nc_istat); /* DUMMY READ */ + istat |= INB(np, nc_istat); /* DUMMY READ */ if (DEBUG_FLAGS & DEBUG_TINY) printf ("F "); sym_wakeup_done(np); } diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c index 70a09a3d5af..707c5b03bce 100644 --- a/drivers/serial/suncore.c +++ b/drivers/serial/suncore.c @@ -23,11 +23,36 @@ #include "suncore.h" -int sunserial_current_minor = 64; +static int sunserial_current_minor = 64; -EXPORT_SYMBOL(sunserial_current_minor); +int sunserial_register_minors(struct uart_driver *drv, int count) +{ + int err = 0; + + drv->minor = sunserial_current_minor; + drv->nr += count; + /* Register the driver on the first call */ + if (drv->nr == count) + err = uart_register_driver(drv); + if (err == 0) { + sunserial_current_minor += count; + drv->tty_driver->name_base = drv->minor - 64; + } + return err; +} +EXPORT_SYMBOL(sunserial_register_minors); + +void sunserial_unregister_minors(struct uart_driver *drv, int count) +{ + drv->nr -= count; + sunserial_current_minor -= count; + + if (drv->nr == 0) + uart_unregister_driver(drv); +} +EXPORT_SYMBOL(sunserial_unregister_minors); -int sunserial_console_match(struct console *con, struct device_node *dp, +int __init sunserial_console_match(struct console *con, struct device_node *dp, struct uart_driver *drv, int line) { int off; @@ -133,8 +158,6 @@ sunserial_console_termios(struct console *con) con->cflag = cflag; } -EXPORT_SYMBOL(sunserial_console_termios); - /* Sun serial MOUSE auto baud rate detection. */ static struct mouse_baud_cflag { int baud; diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h index 829d7d65d6d..042668aa602 100644 --- a/drivers/serial/suncore.h +++ b/drivers/serial/suncore.h @@ -22,7 +22,8 @@ extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *); extern int suncore_mouse_baud_detection(unsigned char, int); -extern int sunserial_current_minor; +extern int sunserial_register_minors(struct uart_driver *, int); +extern void sunserial_unregister_minors(struct uart_driver *, int); extern int sunserial_console_match(struct console *, struct device_node *, struct uart_driver *, int); diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c index 8ff900b0981..be0fe152891 100644 --- a/drivers/serial/sunhv.c +++ b/drivers/serial/sunhv.c @@ -562,16 +562,10 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m port->dev = &op->dev; - sunhv_reg.minor = sunserial_current_minor; - sunhv_reg.nr = 1; - - err = uart_register_driver(&sunhv_reg); + err = sunserial_register_minors(&sunhv_reg, 1); if (err) goto out_free_con_read_page; - sunhv_reg.tty_driver->name_base = sunhv_reg.minor - 64; - sunserial_current_minor += 1; - sunserial_console_match(&sunhv_console, op->node, &sunhv_reg, port->line); @@ -591,8 +585,7 @@ out_remove_port: uart_remove_one_port(&sunhv_reg, port); out_unregister_driver: - sunserial_current_minor -= 1; - uart_unregister_driver(&sunhv_reg); + sunserial_unregister_minors(&sunhv_reg, 1); out_free_con_read_page: kfree(con_read_page); @@ -614,8 +607,7 @@ static int __devexit hv_remove(struct of_device *dev) uart_remove_one_port(&sunhv_reg, port); - sunserial_current_minor -= 1; - uart_unregister_driver(&sunhv_reg); + sunserial_unregister_minors(&sunhv_reg, 1); kfree(port); sunhv_port = NULL; diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index ff610c23314..543f93741e6 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -832,7 +832,6 @@ static struct uart_driver sunsab_reg = { }; static struct uart_sunsab_port *sunsab_ports; -static int num_channels; #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE @@ -1102,8 +1101,8 @@ static int __init sunsab_init(void) { struct device_node *dp; int err; + int num_channels = 0; - num_channels = 0; for_each_node_by_name(dp, "se") num_channels += 2; for_each_node_by_name(dp, "serial") { @@ -1117,20 +1116,14 @@ static int __init sunsab_init(void) if (!sunsab_ports) return -ENOMEM; - sunsab_reg.minor = sunserial_current_minor; - sunsab_reg.nr = num_channels; sunsab_reg.cons = SUNSAB_CONSOLE(); - - err = uart_register_driver(&sunsab_reg); + err = sunserial_register_minors(&sunsab_reg, num_channels); if (err) { kfree(sunsab_ports); sunsab_ports = NULL; return err; } - - sunsab_reg.tty_driver->name_base = sunsab_reg.minor - 64; - sunserial_current_minor += num_channels; } return of_register_driver(&sab_driver, &of_bus_type); @@ -1139,9 +1132,8 @@ static int __init sunsab_init(void) static void __exit sunsab_exit(void) { of_unregister_driver(&sab_driver); - if (num_channels) { - sunserial_current_minor -= num_channels; - uart_unregister_driver(&sunsab_reg); + if (sunsab_reg.nr) { + sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr); } kfree(sunsab_ports); diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index e074943feff..4e2302d43ab 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1528,14 +1528,12 @@ static struct of_platform_driver su_driver = { .remove = __devexit_p(su_remove), }; -static int num_uart; - static int __init sunsu_init(void) { struct device_node *dp; int err; + int num_uart = 0; - num_uart = 0; for_each_node_by_name(dp, "su") { if (su_get_type(dp) == SU_PORT_PORT) num_uart++; @@ -1552,26 +1550,22 @@ static int __init sunsu_init(void) } if (num_uart) { - sunsu_reg.minor = sunserial_current_minor; - sunsu_reg.nr = num_uart; - err = uart_register_driver(&sunsu_reg); + err = sunserial_register_minors(&sunsu_reg, num_uart); if (err) return err; - sunsu_reg.tty_driver->name_base = sunsu_reg.minor - 64; - sunserial_current_minor += num_uart; } err = of_register_driver(&su_driver, &of_bus_type); if (err && num_uart) - uart_unregister_driver(&sunsu_reg); + sunserial_unregister_minors(&sunsu_reg, num_uart); return err; } static void __exit sunsu_exit(void) { - if (num_uart) - uart_unregister_driver(&sunsu_reg); + if (sunsu_reg.nr) + sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr); } module_init(sunsu_init); diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 283bef0d24c..cb2e4050637 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -63,10 +63,6 @@ readb(&((__channel)->control)) #endif -static int num_sunzilog; -#define NUM_SUNZILOG num_sunzilog -#define NUM_CHANNELS (NUM_SUNZILOG * 2) - #define ZS_CLOCK 4915200 /* Zilog input clock rate. */ #define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ @@ -1031,18 +1027,19 @@ static struct uart_driver sunzilog_reg = { .major = TTY_MAJOR, }; -static int __init sunzilog_alloc_tables(void) +static int __init sunzilog_alloc_tables(int num_sunzilog) { struct uart_sunzilog_port *up; unsigned long size; + int num_channels = num_sunzilog * 2; int i; - size = NUM_CHANNELS * sizeof(struct uart_sunzilog_port); + size = num_channels * sizeof(struct uart_sunzilog_port); sunzilog_port_table = kzalloc(size, GFP_KERNEL); if (!sunzilog_port_table) return -ENOMEM; - for (i = 0; i < NUM_CHANNELS; i++) { + for (i = 0; i < num_channels; i++) { up = &sunzilog_port_table[i]; spin_lock_init(&up->port.lock); @@ -1050,13 +1047,13 @@ static int __init sunzilog_alloc_tables(void) if (i == 0) sunzilog_irq_chain = up; - if (i < NUM_CHANNELS - 1) + if (i < num_channels - 1) up->next = up + 1; else up->next = NULL; } - size = NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *); + size = num_sunzilog * sizeof(struct zilog_layout __iomem *); sunzilog_chip_regs = kzalloc(size, GFP_KERNEL); if (!sunzilog_chip_regs) { kfree(sunzilog_port_table); @@ -1496,34 +1493,28 @@ static int __init sunzilog_init(void) struct device_node *dp; int err, uart_count; int num_keybms; + int num_sunzilog = 0; - NUM_SUNZILOG = 0; num_keybms = 0; for_each_node_by_name(dp, "zs") { - NUM_SUNZILOG++; + num_sunzilog++; if (of_find_property(dp, "keyboard", NULL)) num_keybms++; } uart_count = 0; - if (NUM_SUNZILOG) { + if (num_sunzilog) { int uart_count; - err = sunzilog_alloc_tables(); + err = sunzilog_alloc_tables(num_sunzilog); if (err) goto out; - uart_count = (NUM_SUNZILOG * 2) - (2 * num_keybms); + uart_count = (num_sunzilog * 2) - (2 * num_keybms); - sunzilog_reg.nr = uart_count; - sunzilog_reg.minor = sunserial_current_minor; - err = uart_register_driver(&sunzilog_reg); + err = sunserial_register_minors(&sunzilog_reg, uart_count); if (err) goto out_free_tables; - - sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64; - - sunserial_current_minor += uart_count; } err = of_register_driver(&zs_driver, &of_bus_type); @@ -1557,8 +1548,8 @@ out_unregister_driver: of_unregister_driver(&zs_driver); out_unregister_uart: - if (NUM_SUNZILOG) { - uart_unregister_driver(&sunzilog_reg); + if (num_sunzilog) { + sunserial_unregister_minors(&sunzilog_reg, num_sunzilog); sunzilog_reg.cons = NULL; } @@ -1590,8 +1581,8 @@ static void __exit sunzilog_exit(void) zilog_irq = -1; } - if (NUM_SUNZILOG) { - uart_unregister_driver(&sunzilog_reg); + if (sunzilog_reg.nr) { + sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr); sunzilog_free_tables(); } } diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index a85f2d31a68..3f593247c41 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -393,6 +393,7 @@ static inline void __init ulite_console_of_find_device(int id) continue; ulite_ports[id].mapbase = res.start; + of_node_put(np); return; } } diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index ff6a14bf128..ff10808183a 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -195,8 +195,8 @@ static void atmel_spi_next_xfer(struct spi_master *master, xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR)); - spi_writel(as, TCR, len); spi_writel(as, RCR, len); + spi_writel(as, TCR, len); spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); } diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 5f3d808cbc2..1c2ab541d37 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -39,7 +39,7 @@ #include <asm/arch/pxa2xx_spi.h> MODULE_AUTHOR("Stephen Street"); -MODULE_DESCRIPTION("PXA2xx SSP SPI Contoller"); +MODULE_DESCRIPTION("PXA2xx SSP SPI Controller"); MODULE_LICENSE("GPL"); #define MAX_BUSES 3 diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 22697b81220..7ef39a6e8c0 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -54,7 +54,7 @@ #define DRV_NAME "bfin-spi" #define DRV_AUTHOR "Bryan Wu, Luke Yang" -#define DRV_DESC "Blackfin BF5xx on-chip SPI Contoller Driver" +#define DRV_DESC "Blackfin BF5xx on-chip SPI Controller Driver" #define DRV_VERSION "1.0" MODULE_AUTHOR(DRV_AUTHOR); diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 7686ba34430..2cd8573fb09 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -1758,5 +1758,5 @@ static void __exit spi_imx_exit(void) module_exit(spi_imx_exit); MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>"); -MODULE_DESCRIPTION("iMX SPI Contoller Driver"); +MODULE_DESCRIPTION("iMX SPI Controller Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 5cf6d5f9acb..3fb9af80cbf 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -125,7 +125,7 @@ int usb_hcd_pci_probe (struct pci_dev *dev, const struct pci_device_id *id) pci_set_master (dev); - retval = usb_add_hcd (hcd, dev->irq, IRQF_SHARED); + retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err4; return retval; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 13b326a1337..b04d232d4c6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -522,9 +522,9 @@ static void hub_quiesce(struct usb_hub *hub) /* (blocking) stop khubd and related activity */ usb_kill_urb(hub->urb); if (hub->has_indicators) - cancel_delayed_work(&hub->leds); - if (hub->has_indicators || hub->tt.hub) - flush_scheduled_work(); + cancel_delayed_work_sync(&hub->leds); + if (hub->tt.hub) + cancel_work_sync(&hub->tt.kevent); } static void hub_activate(struct usb_hub *hub) diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index a6adf7e0f6f..cd62b029d17 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -887,6 +887,7 @@ static void pullup(struct at91_udc *udc, int is_on) if (is_on) { clk_on(udc); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM); at91_udp_write(udc, AT91_UDP_TXVC, 0); if (cpu_is_at91rm9200()) at91_set_gpio_value(udc->board.pullup_pin, 1); @@ -904,6 +905,7 @@ static void pullup(struct at91_udc *udc, int is_on) } } else { stop_activity(udc); + at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM); at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); if (cpu_is_at91rm9200()) at91_set_gpio_value(udc->board.pullup_pin, 0); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index b7b7bfbce52..430821cb95c 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -122,7 +122,7 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver, temp = in_le32(hcd->regs + 0x1a8); out_le32(hcd->regs + 0x1a8, temp | 0x3); - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err4; return retval; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 704f33fdd2f..ecfe800fd72 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -732,24 +732,27 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) struct ohci_regs __iomem *regs = ohci->regs; int ints; - /* we can eliminate a (slow) ohci_readl() - * if _only_ WDH caused this irq + /* Read interrupt status (and flush pending writes). We ignore the + * optimization of checking the LSB of hcca->done_head; it doesn't + * work on all systems (edge triggering for OHCI can be a factor). */ - if ((ohci->hcca->done_head != 0) - && ! (hc32_to_cpup (ohci, &ohci->hcca->done_head) - & 0x01)) { - ints = OHCI_INTR_WDH; + ints = ohci_readl(ohci, ®s->intrstatus); - /* cardbus/... hardware gone before remove() */ - } else if ((ints = ohci_readl (ohci, ®s->intrstatus)) == ~(u32)0) { + /* Check for an all 1's result which is a typical consequence + * of dead, unclocked, or unplugged (CardBus...) devices + */ + if (ints == ~(u32)0) { disable (ohci); ohci_dbg (ohci, "device removed!\n"); return IRQ_HANDLED; + } + + /* We only care about interrupts that are enabled */ + ints &= ohci_readl(ohci, ®s->intrenable); /* interrupt for some other device? */ - } else if ((ints &= ohci_readl (ohci, ®s->intrenable)) == 0) { + if (ints == 0) return IRQ_NOTMINE; - } if (ints & OHCI_INTR_UE) { // e.g. due to PCI Master/Target Abort diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 0a742692015..0c3e6b790b7 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -142,7 +142,7 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) ohci_hcd_init(ohci); - rv = usb_add_hcd(hcd, irq, 0); + rv = usb_add_hcd(hcd, irq, IRQF_DISABLED); if (rv == 0) return 0; diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c index fe70e72340d..6e9c2d6db88 100644 --- a/drivers/usb/host/ohci-ssb.c +++ b/drivers/usb/host/ohci-ssb.c @@ -160,7 +160,7 @@ static int ssb_ohci_attach(struct ssb_device *dev) hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) goto err_put_hcd; - err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED); + err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (err) goto err_iounmap; diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index ae8ec4474eb..0ce2fc5e396 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2197,7 +2197,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) INIT_LIST_HEAD(&r8a66597->child_device); hcd->rsrc_start = res->start; - ret = usb_add_hcd(hcd, irq, 0); + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); if (ret != 0) { err("Failed to add hcd"); goto clean_up; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4db17f75f4f..ec987897b8e 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -378,7 +378,6 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); unsigned short status; - unsigned long flags; /* * Read the interrupt status, and write it back to clear the @@ -398,7 +397,7 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) dev_err(uhci_dev(uhci), "host controller process " "error, something bad happened!\n"); if (status & USBSTS_HCH) { - spin_lock_irqsave(&uhci->lock, flags); + spin_lock(&uhci->lock); if (uhci->rh_state >= UHCI_RH_RUNNING) { dev_err(uhci_dev(uhci), "host controller halted, " @@ -415,16 +414,16 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) * pending unlinks */ mod_timer(&hcd->rh_timer, jiffies); } - spin_unlock_irqrestore(&uhci->lock, flags); + spin_unlock(&uhci->lock); } } if (status & USBSTS_RD) usb_hcd_poll_rh_status(hcd); else { - spin_lock_irqsave(&uhci->lock, flags); + spin_lock(&uhci->lock); uhci_scan_schedule(uhci); - spin_unlock_irqrestore(&uhci->lock, flags); + spin_unlock(&uhci->lock); } return IRQ_HANDLED; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 3a83cb4c4bc..da16b515781 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -71,6 +71,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ + { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ @@ -98,8 +99,8 @@ static struct usb_serial_driver cp2101_device = { .usb_driver = &cp2101_driver, .id_table = id_table, .num_interrupt_in = 0, - .num_bulk_in = 0, - .num_bulk_out = 0, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, .open = cp2101_open, .close = cp2101_close, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4590124cf88..d1185f53447 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -158,8 +158,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin XS620/S640 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin S620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1120) }, /* Novatel Merlin EX720 */ diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 605ebccdcd5..e5c274044a5 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -100,6 +100,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ + { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */ @@ -137,7 +138,6 @@ static struct usb_device_id id_table_3port [] = { { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ - { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U*/ diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 836a34ae6ec..7c9593b7b04 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -114,9 +114,15 @@ static int slave_configure(struct scsi_device *sdev) * while others have trouble with more than 64K. At this time we * are limiting both to 32K (64 sectores). */ - if ((us->flags & US_FL_MAX_SECTORS_64) && - sdev->request_queue->max_sectors > 64) - blk_queue_max_sectors(sdev->request_queue, 64); + if (us->flags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) { + unsigned int max_sectors = 64; + + if (us->flags & US_FL_MAX_SECTORS_MIN) + max_sectors = PAGE_CACHE_SIZE >> 9; + if (sdev->request_queue->max_sectors > max_sectors) + blk_queue_max_sectors(sdev->request_queue, + max_sectors); + } /* We can't put these settings in slave_alloc() because that gets * called before the device type is known. Consequently these diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 2c27721bd25..6d6108b3993 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -376,6 +376,13 @@ UNUSUAL_DEV( 0x04b0, 0x0417, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Doug Maxey (dwm@austin.ibm.com) */ +UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, + "IBM", + "IBM RSA2", + US_SC_DEVICE, US_PR_CB, NULL, + US_FL_MAX_SECTORS_MIN), + /* BENQ DC5330 * Reported by Manuel Fombuena <mfombuena@ya.com> and * Frank Copeland <fjc@thingy.apana.org.au> */ @@ -1258,14 +1265,6 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE ), -/* SanDisk that has a second LUN for a driver ISO, reported by - * Ben Collins <bcollins@ubuntu.com> */ -UNUSUAL_DEV( 0x0781, 0x5406, 0x0000, 0xffff, - "SanDisk", - "U3 Cruzer Micro driver ISO", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_SINGLE_LUN ), - #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, "ATI", diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index 9c56c492a69..b3128903d67 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -51,7 +51,8 @@ #define L1GPU_DISPLAY_SYNC_HSYNC 1 #define L1GPU_DISPLAY_SYNC_VSYNC 2 -#define GPU_CMD_BUF_SIZE (64 * 1024) +#define GPU_CMD_BUF_SIZE (2 * 1024 * 1024) +#define GPU_FB_START (64 * 1024) #define GPU_IOIF (0x0d000000UL) #define GPU_ALIGN_UP(x) _ALIGN_UP((x), 64) #define GPU_MAX_LINE_LENGTH (65536 - 64) @@ -406,6 +407,7 @@ static void ps3fb_sync_image(struct device *dev, u64 frame_offset, if (src_line_length != dst_line_length) line_length |= (u64)src_line_length << 32; + src_offset += GPU_FB_START; status = lv1_gpu_context_attribute(ps3fb.context_handle, L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, dst_offset, GPU_IOIF + src_offset, @@ -976,9 +978,8 @@ static int ps3fb_xdr_settings(u64 xdr_lpar, struct device *dev) status = lv1_gpu_context_attribute(ps3fb.context_handle, L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP, - xdr_lpar + ps3fb.xdr_size, - GPU_CMD_BUF_SIZE, - GPU_IOIF + ps3fb.xdr_size, 0); + xdr_lpar, GPU_CMD_BUF_SIZE, + GPU_IOIF, 0); if (status) { dev_err(dev, "%s: lv1_gpu_context_attribute FB_SETUP failed: %d\n", @@ -1061,6 +1062,11 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev) struct task_struct *task; unsigned long max_ps3fb_size; + if (ps3fb_videomemory.size < GPU_CMD_BUF_SIZE) { + dev_err(&dev->core, "%s: Not enough video memory\n", __func__); + return -ENOMEM; + } + status = ps3_open_hv_device(dev); if (status) { dev_err(&dev->core, "%s: ps3_open_hv_device failed\n", @@ -1131,8 +1137,14 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev) /* Clear memory to prevent kernel info leakage into userspace */ memset(ps3fb.xdr_ea, 0, ps3fb_videomemory.size); - /* The GPU command buffer is at the end of video memory */ - ps3fb.xdr_size = ps3fb_videomemory.size - GPU_CMD_BUF_SIZE; + /* + * The GPU command buffer is at the start of video memory + * As we don't use the full command buffer, we can put the actual + * frame buffer at offset GPU_FB_START and save some precious XDR + * memory + */ + ps3fb.xdr_ea += GPU_FB_START; + ps3fb.xdr_size = ps3fb_videomemory.size - GPU_FB_START; retval = ps3fb_xdr_settings(xdr_lpar, &dev->core); if (retval) @@ -1200,7 +1212,7 @@ err_fb_dealloc: err_framebuffer_release: framebuffer_release(info); err_free_irq: - free_irq(ps3fb.irq_no, dev); + free_irq(ps3fb.irq_no, &dev->core); ps3_irq_plug_destroy(ps3fb.irq_no); err_iounmap_dinfo: iounmap((u8 __iomem *)ps3fb.dinfo); @@ -1235,7 +1247,7 @@ static int ps3fb_shutdown(struct ps3_system_bus_device *dev) kthread_stop(task); } if (ps3fb.irq_no) { - free_irq(ps3fb.irq_no, dev); + free_irq(ps3fb.irq_no, &dev->core); ps3_irq_plug_destroy(ps3fb.irq_no); } iounmap((u8 __iomem *)ps3fb.dinfo); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 2792bc1a726..52dff40ec19 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -392,6 +392,16 @@ config ITCO_VENDOR_SUPPORT devices. At this moment we only have additional support for some SuperMicro Inc. motherboards. +config IT8712F_WDT + tristate "IT8712F (Smart Guardian) Watchdog Timer" + depends on X86 + ---help--- + This is the driver for the built-in watchdog timer on the IT8712F + Super I/0 chipset used on many motherboards. + + To compile this driver as a module, choose M here: the + module will be called it8712f_wdt. + config SC1200_WDT tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" depends on X86 @@ -456,6 +466,19 @@ config SBC8360_WDT Most people will say N. +config SBC7240_WDT + tristate "SBC Nano 7240 Watchdog Timer" + depends on X86_32 + ---help--- + This is the driver for the hardware watchdog found on the IEI + single board computers EPIC Nano 7240 (and likely others). This + watchdog simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of + time. + + To compile this driver as a module, choose M here: the + module will be called sbc7240_wdt. + config CPU5_WDT tristate "SMA CPU5 Watchdog" depends on X86 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 7d9e5734f8b..87483cc6325 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -66,11 +66,13 @@ obj-$(CONFIG_IBMASR) += ibmasr.o obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o +obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o obj-$(CONFIG_SBC8360_WDT) += sbc8360.o +obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index 54a516169d0..fb5ed6478f7 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -6,6 +6,19 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * + * Errata: WDT Clear is blocked after WDT Reset + * + * A watchdog timer event will, after reset, block writes to the WDT_CLEAR + * register, preventing the program to clear the next Watchdog Timer Reset. + * + * If you still want to use the WDT after a WDT reset a small code can be + * insterted at the startup checking the AVR32_PM.rcause register for WDT reset + * and use a GPIO pin to reset the system. This method requires that one of the + * GPIO pins are available and connected externally to the RESET_N pin. After + * the GPIO pin has pulled down the reset line the GPIO will be reset and leave + * the pin tristated with pullup. */ #include <linux/init.h> @@ -44,6 +57,13 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" #define WDT_CLR 0x04 +#define WDT_RCAUSE 0x10 +#define WDT_RCAUSE_POR 0 +#define WDT_RCAUSE_EXT 2 +#define WDT_RCAUSE_WDT 3 +#define WDT_RCAUSE_JTAG 4 +#define WDT_RCAUSE_SERP 5 + #define WDT_BIT(name) (1 << WDT_##name) #define WDT_BF(name, value) ((value) << WDT_##name) @@ -56,6 +76,7 @@ struct wdt_at32ap700x { void __iomem *regs; spinlock_t io_lock; int timeout; + int boot_status; unsigned long users; struct miscdevice miscdev; }; @@ -126,7 +147,7 @@ static int at32_wdt_close(struct inode *inode, struct file *file) at32_wdt_stop(); } else { dev_dbg(wdt->miscdev.parent, - "Unexpected close, not stopping watchdog!\n"); + "unexpected close, not stopping watchdog!\n"); at32_wdt_pat(); } clear_bit(1, &wdt->users); @@ -154,6 +175,33 @@ static int at32_wdt_settimeout(int time) return 0; } +/* + * Get the watchdog status. + */ +static int at32_wdt_get_status(void) +{ + int rcause; + int status = 0; + + rcause = wdt_readl(wdt, RCAUSE); + + switch (rcause) { + case WDT_BIT(RCAUSE_EXT): + status = WDIOF_EXTERN1; + break; + case WDT_BIT(RCAUSE_WDT): + status = WDIOF_CARDRESET; + break; + case WDT_BIT(RCAUSE_POR): /* fall through */ + case WDT_BIT(RCAUSE_JTAG): /* fall through */ + case WDT_BIT(RCAUSE_SERP): /* fall through */ + default: + break; + } + + return status; +} + static struct watchdog_info at32_wdt_info = { .identity = "at32ap700x watchdog", .options = WDIOF_SETTIMEOUT | @@ -194,10 +242,12 @@ static int at32_wdt_ioctl(struct inode *inode, struct file *file, case WDIOC_GETTIMEOUT: ret = put_user(wdt->timeout, p); break; - case WDIOC_GETSTATUS: /* fall through */ - case WDIOC_GETBOOTSTATUS: + case WDIOC_GETSTATUS: ret = put_user(0, p); break; + case WDIOC_GETBOOTSTATUS: + ret = put_user(wdt->boot_status, p); + break; case WDIOC_SETOPTIONS: ret = get_user(time, p); if (ret) @@ -282,8 +332,19 @@ static int __init at32_wdt_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "could not map I/O memory\n"); goto err_free; } + spin_lock_init(&wdt->io_lock); - wdt->users = 0; + wdt->boot_status = at32_wdt_get_status(); + + /* Work-around for watchdog silicon errata. */ + if (wdt->boot_status & WDIOF_CARDRESET) { + dev_info(&pdev->dev, "CPU must be reset with external " + "reset or POR due to silicon errata.\n"); + ret = -EIO; + goto err_iounmap; + } else { + wdt->users = 0; + } wdt->miscdev.minor = WATCHDOG_MINOR; wdt->miscdev.name = "watchdog"; wdt->miscdev.fops = &at32_wdt_fops; diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 309d27913fc..31dc7a69e90 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -71,7 +71,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; static struct watchdog_info bfin_wdt_info; static unsigned long open_check; static char expect_close; -static spinlock_t bfin_wdt_spinlock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(bfin_wdt_spinlock); /** * bfin_wdt_keepalive - Keep the Userspace Watchdog Alive diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c new file mode 100644 index 00000000000..6330fc02464 --- /dev/null +++ b/drivers/watchdog/it8712f_wdt.c @@ -0,0 +1,400 @@ +/* + * IT8712F "Smart Guardian" Watchdog support + * + * Copyright (c) 2006-2007 Jorge Boncompte - DTI2 <jorge@dti2.net> + * + * Based on info and code taken from: + * + * drivers/char/watchdog/scx200_wdt.c + * drivers/hwmon/it87.c + * IT8712F EC-LPC I/O Preliminary Specification 0.9.2.pdf + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * The author(s) of this software shall not be held liable for damages + * of any nature resulting due to the use of this software. This + * software is provided AS-IS with no warranties. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/fs.h> +#include <linux/pci.h> +#include <linux/spinlock.h> + +#include <asm/uaccess.h> +#include <asm/io.h> + +#define NAME "it8712f_wdt" + +MODULE_AUTHOR("Jorge Boncompte - DTI2 <jorge@dti2.net>"); +MODULE_DESCRIPTION("IT8712F Watchdog Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + +static int margin = 60; /* in seconds */ +module_param(margin, int, 0); +MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); + +static struct semaphore it8712f_wdt_sem; +static unsigned expect_close; +static spinlock_t io_lock; + +/* Dog Food address - We use the game port address */ +static unsigned short address; + +#define REG 0x2e /* The register to read/write */ +#define VAL 0x2f /* The value to read/write */ + +#define LDN 0x07 /* Register: Logical device select */ +#define DEVID 0x20 /* Register: Device ID */ +#define DEVREV 0x22 /* Register: Device Revision */ +#define ACT_REG 0x30 /* LDN Register: Activation */ +#define BASE_REG 0x60 /* LDN Register: Base address */ + +#define IT8712F_DEVID 0x8712 + +#define LDN_GPIO 0x07 /* GPIO and Watch Dog Timer */ +#define LDN_GAME 0x09 /* Game Port */ + +#define WDT_CONTROL 0x71 /* WDT Register: Control */ +#define WDT_CONFIG 0x72 /* WDT Register: Configuration */ +#define WDT_TIMEOUT 0x73 /* WDT Register: Timeout Value */ + +#define WDT_RESET_GAME 0x10 +#define WDT_RESET_KBD 0x20 +#define WDT_RESET_MOUSE 0x40 +#define WDT_RESET_CIR 0x80 + +#define WDT_UNIT_SEC 0x80 /* If 0 in MINUTES */ + +#define WDT_OUT_PWROK 0x10 +#define WDT_OUT_KRST 0x40 + +static int +superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +static void +superio_outb(int val, int reg) +{ + outb(reg, REG); + outb(val, VAL); +} + +static int +superio_inw(int reg) +{ + int val; + outb(reg++, REG); + val = inb(VAL) << 8; + outb(reg, REG); + val |= inb(VAL); + return val; +} + +static inline void +superio_select(int ldn) +{ + outb(LDN, REG); + outb(ldn, VAL); +} + +static inline void +superio_enter(void) +{ + spin_lock(&io_lock); + outb(0x87, REG); + outb(0x01, REG); + outb(0x55, REG); + outb(0x55, REG); +} + +static inline void +superio_exit(void) +{ + outb(0x02, REG); + outb(0x02, VAL); + spin_unlock(&io_lock); +} + +static inline void +it8712f_wdt_ping(void) +{ + inb(address); +} + +static void +it8712f_wdt_update_margin(void) +{ + int config = WDT_OUT_KRST | WDT_OUT_PWROK; + + printk(KERN_INFO NAME ": timer margin %d seconds\n", margin); + + /* The timeout register only has 8bits wide */ + if (margin < 256) + config |= WDT_UNIT_SEC; /* else UNIT are MINUTES */ + superio_outb(config, WDT_CONFIG); + + superio_outb((margin > 255) ? (margin / 60) : margin, WDT_TIMEOUT); +} + +static void +it8712f_wdt_enable(void) +{ + printk(KERN_DEBUG NAME ": enabling watchdog timer\n"); + superio_enter(); + superio_select(LDN_GPIO); + + superio_outb(WDT_RESET_GAME, WDT_CONTROL); + + it8712f_wdt_update_margin(); + + superio_exit(); + + it8712f_wdt_ping(); +} + +static void +it8712f_wdt_disable(void) +{ + printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); + + superio_enter(); + superio_select(LDN_GPIO); + + superio_outb(0, WDT_CONFIG); + superio_outb(0, WDT_CONTROL); + superio_outb(0, WDT_TIMEOUT); + + superio_exit(); +} + +static int +it8712f_wdt_notify(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_HALT || code == SYS_POWER_OFF) + if (!nowayout) + it8712f_wdt_disable(); + + return NOTIFY_DONE; +} + +static struct notifier_block it8712f_wdt_notifier = { + .notifier_call = it8712f_wdt_notify, +}; + +static ssize_t +it8712f_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* check for a magic close character */ + if (len) { + size_t i; + + it8712f_wdt_ping(); + + expect_close = 0; + for (i = 0; i < len; ++i) { + char c; + if (get_user(c, data+i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + return len; +} + +static int +it8712f_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static struct watchdog_info ident = { + .identity = "IT8712F Watchdog", + .firmware_version = 1, + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + }; + int new_margin; + + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + it8712f_wdt_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + if (new_margin < 1) + return -EINVAL; + margin = new_margin; + superio_enter(); + superio_select(LDN_GPIO); + + it8712f_wdt_update_margin(); + + superio_exit(); + it8712f_wdt_ping(); + case WDIOC_GETTIMEOUT: + if (put_user(margin, p)) + return -EFAULT; + return 0; + } +} + +static int +it8712f_wdt_open(struct inode *inode, struct file *file) +{ + /* only allow one at a time */ + if (down_trylock(&it8712f_wdt_sem)) + return -EBUSY; + it8712f_wdt_enable(); + + return nonseekable_open(inode, file); +} + +static int +it8712f_wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close != 42) { + printk(KERN_WARNING NAME + ": watchdog device closed unexpectedly, will not" + " disable the watchdog timer\n"); + } else if (!nowayout) { + it8712f_wdt_disable(); + } + expect_close = 0; + up(&it8712f_wdt_sem); + + return 0; +} + +static struct file_operations it8712f_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = it8712f_wdt_write, + .ioctl = it8712f_wdt_ioctl, + .open = it8712f_wdt_open, + .release = it8712f_wdt_release, +}; + +static struct miscdevice it8712f_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &it8712f_wdt_fops, +}; + +static int __init +it8712f_wdt_find(unsigned short *address) +{ + int err = -ENODEV; + int chip_type; + + superio_enter(); + chip_type = superio_inw(DEVID); + if (chip_type != IT8712F_DEVID) + goto exit; + + superio_select(LDN_GAME); + superio_outb(1, ACT_REG); + if (!(superio_inb(ACT_REG) & 0x01)) { + printk(KERN_ERR NAME ": Device not activated, skipping\n"); + goto exit; + } + + *address = superio_inw(BASE_REG); + if (*address == 0) { + printk(KERN_ERR NAME ": Base address not set, skipping\n"); + goto exit; + } + + err = 0; + printk(KERN_DEBUG NAME ": Found IT%04xF chip revision %d - " + "using DogFood address 0x%x\n", + chip_type, superio_inb(DEVREV) & 0x0f, *address); + +exit: + superio_exit(); + return err; +} + +static int __init +it8712f_wdt_init(void) +{ + int err = 0; + + spin_lock_init(&io_lock); + + if (it8712f_wdt_find(&address)) + return -ENODEV; + + if (!request_region(address, 1, "IT8712F Watchdog")) { + printk(KERN_WARNING NAME ": watchdog I/O region busy\n"); + return -EBUSY; + } + + it8712f_wdt_disable(); + + sema_init(&it8712f_wdt_sem, 1); + + err = register_reboot_notifier(&it8712f_wdt_notifier); + if (err) { + printk(KERN_ERR NAME ": unable to register reboot notifier\n"); + goto out; + } + + err = misc_register(&it8712f_wdt_miscdev); + if (err) { + printk(KERN_ERR NAME + ": cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, err); + goto reboot_out; + } + + return 0; + + +reboot_out: + unregister_reboot_notifier(&it8712f_wdt_notifier); +out: + release_region(address, 1); + return err; +} + +static void __exit +it8712f_wdt_exit(void) +{ + misc_deregister(&it8712f_wdt_miscdev); + unregister_reboot_notifier(&it8712f_wdt_notifier); + release_region(address, 1); +} + +module_init(it8712f_wdt_init); +module_exit(it8712f_wdt_exit); diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c new file mode 100644 index 00000000000..4c8cefbd862 --- /dev/null +++ b/drivers/watchdog/sbc7240_wdt.c @@ -0,0 +1,324 @@ +/* + * NANO7240 SBC Watchdog device driver + * + * Based on w83877f.c by Scott Jennings, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * (c) Copyright 2007 Gilles GIGAN <gilles.gigan@jcu.edu.au> + * + */ + +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/miscdevice.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <asm/atomic.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/uaccess.h> + +#define SBC7240_PREFIX "sbc7240_wdt: " + +#define SBC7240_ENABLE_PORT 0x443 +#define SBC7240_DISABLE_PORT 0x043 +#define SBC7240_SET_TIMEOUT_PORT SBC7240_ENABLE_PORT +#define SBC7240_MAGIC_CHAR 'V' + +#define SBC7240_TIMEOUT 30 +#define SBC7240_MAX_TIMEOUT 255 +static int timeout = SBC7240_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=" + __MODULE_STRING(SBC7240_MAX_TIMEOUT) ", default=" + __MODULE_STRING(SBC7240_TIMEOUT) ")"); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Disable watchdog when closing device file"); + +#define SBC7240_OPEN_STATUS_BIT 0 +#define SBC7240_ENABLED_STATUS_BIT 1 +#define SBC7240_EXPECT_CLOSE_STATUS_BIT 2 +static unsigned long wdt_status; + +/* + * Utility routines + */ + +static void wdt_disable(void) +{ + /* disable the watchdog */ + if (test_and_clear_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) { + inb_p(SBC7240_DISABLE_PORT); + printk(KERN_INFO SBC7240_PREFIX + "Watchdog timer is now disabled.\n"); + } +} + +static void wdt_enable(void) +{ + /* enable the watchdog */ + if (!test_and_set_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) { + inb_p(SBC7240_ENABLE_PORT); + printk(KERN_INFO SBC7240_PREFIX + "Watchdog timer is now enabled.\n"); + } +} + +static int wdt_set_timeout(int t) +{ + if (t < 1 || t > SBC7240_MAX_TIMEOUT) { + printk(KERN_ERR SBC7240_PREFIX + "timeout value must be 1<=x<=%d\n", + SBC7240_MAX_TIMEOUT); + return -1; + } + /* set the timeout */ + outb_p((unsigned)t, SBC7240_SET_TIMEOUT_PORT); + timeout = t; + printk(KERN_INFO SBC7240_PREFIX "timeout set to %d seconds\n", t); + return 0; +} + +/* Whack the dog */ +static inline void wdt_keepalive(void) +{ + if (test_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) + inb_p(SBC7240_ENABLE_PORT); +} + +/* + * /dev/watchdog handling + */ +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + size_t i; + char c; + + if (count) { + if (!nowayout) { + clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, + &wdt_status); + + /* is there a magic char ? */ + for (i = 0; i != count; i++) { + if (get_user(c, buf + i)) + return -EFAULT; + if (c == SBC7240_MAGIC_CHAR) { + set_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, + &wdt_status); + break; + } + } + } + + wdt_keepalive(); + } + + return count; +} + +static int fop_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status)) + return -EBUSY; + + wdt_enable(); + + return nonseekable_open(inode, file); +} + +static int fop_close(struct inode *inode, struct file *file) +{ + if (test_and_clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, &wdt_status) + || !nowayout) { + wdt_disable(); + } else { + printk(KERN_CRIT SBC7240_PREFIX + "Unexpected close, not stopping watchdog!\n"); + wdt_keepalive(); + } + + clear_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status); + return 0; +} + +static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING| + WDIOF_SETTIMEOUT| + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "SBC7240", +}; + + +static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user + ((void __user *)arg, &ident, sizeof(ident)) + ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, (int __user *)arg); + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETOPTIONS:{ + int options; + int retval = -EINVAL; + + if (get_user(options, (int __user *)arg)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + wdt_enable(); + retval = 0; + } + + return retval; + } + case WDIOC_SETTIMEOUT:{ + int new_timeout; + + if (get_user(new_timeout, (int __user *)arg)) + return -EFAULT; + + if (wdt_set_timeout(new_timeout)) + return -EINVAL; + + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, (int __user *)arg); + default: + return -ENOTTY; + } +} + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = fop_write, + .open = fop_open, + .release = fop_close, + .ioctl = fop_ioctl, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +/* + * Notifier for system down + */ + +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_disable(); + return NOTIFY_DONE; +} + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static void __exit sbc7240_wdt_unload(void) +{ + printk(KERN_INFO SBC7240_PREFIX "Removing watchdog\n"); + misc_deregister(&wdt_miscdev); + + unregister_reboot_notifier(&wdt_notifier); + release_region(SBC7240_ENABLE_PORT, 1); +} + +static int __init sbc7240_wdt_init(void) +{ + int rc = -EBUSY; + + if (!request_region(SBC7240_ENABLE_PORT, 1, "SBC7240 WDT")) { + printk(KERN_ERR SBC7240_PREFIX + "I/O address 0x%04x already in use\n", + SBC7240_ENABLE_PORT); + rc = -EIO; + goto err_out; + } + + /* The IO port 0x043 used to disable the watchdog + * is already claimed by the system timer, so we + * cant request_region() it ...*/ + + if (timeout < 1 || timeout > SBC7240_MAX_TIMEOUT) { + timeout = SBC7240_TIMEOUT; + printk(KERN_INFO SBC7240_PREFIX + "timeout value must be 1<=x<=%d, using %d\n", + SBC7240_MAX_TIMEOUT, timeout); + } + wdt_set_timeout(timeout); + wdt_disable(); + + rc = register_reboot_notifier(&wdt_notifier); + if (rc) { + printk(KERN_ERR SBC7240_PREFIX + "cannot register reboot notifier (err=%d)\n", rc); + goto err_out_region; + } + + rc = misc_register(&wdt_miscdev); + if (rc) { + printk(KERN_ERR SBC7240_PREFIX + "cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); + goto err_out_reboot_notifier; + } + + printk(KERN_INFO SBC7240_PREFIX + "Watchdog driver for SBC7240 initialised (nowayout=%d)\n", + nowayout); + + return 0; + +err_out_reboot_notifier: + unregister_reboot_notifier(&wdt_notifier); +err_out_region: + release_region(SBC7240_ENABLE_PORT, 1); +err_out: + return rc; +} + +module_init(sbc7240_wdt_init); +module_exit(sbc7240_wdt_unload); + +MODULE_AUTHOR("Gilles Gigan"); +MODULE_DESCRIPTION("Watchdog device driver for single board" + " computers EPIC Nano 7240 from iEi"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index c622a0e6c9a..6ea125eabea 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -382,8 +382,10 @@ wdt_init(void) /* we will autodetect the W83697HF/HG watchdog */ for (i = 0; ((!found) && (w83697hf_ioports[i] != 0)); i++) { wdt_io = w83697hf_ioports[i]; - if (!w83697hf_check_wdt()) + if (!w83697hf_check_wdt()) { found++; + break; + } } } else { if (!w83697hf_check_wdt()) diff --git a/fs/Kconfig b/fs/Kconfig index 635f3e286ad..487236c6583 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1305,7 +1305,7 @@ config JFFS2_COMPRESSION_OPTIONS help Enabling this option allows you to explicitly choose which compression modules, if any, are enabled in JFFS2. Removing - compressors and mean you cannot read existing file systems, + compressors can mean you cannot read existing file systems, and enabling experimental compressors can mean that you write a file system which cannot be read by a standard kernel. diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c index e176d195e7e..7596e1e94cd 100644 --- a/fs/binfmt_aout.c +++ b/fs/binfmt_aout.c @@ -319,7 +319,6 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) current->mm->free_area_cache = current->mm->mmap_base; current->mm->cached_hole_size = 0; - current->mm->mmap = NULL; compute_creds(bprm); current->flags &= ~PF_FORKNOEXEC; #ifdef __sparc__ diff --git a/fs/dquot.c b/fs/dquot.c index 2809768d9c4..686ab63a7c6 100644 --- a/fs/dquot.c +++ b/fs/dquot.c @@ -965,7 +965,7 @@ err_out: } #endif -static inline void flush_warnings(struct dquot **dquots, char *warntype) +static inline void flush_warnings(struct dquot * const *dquots, char *warntype) { int i; @@ -1216,7 +1216,7 @@ warn_put_all: for (cnt = 0; cnt < MAXQUOTAS; cnt++) if (inode->i_dquot[cnt]) mark_dquot_dirty(inode->i_dquot[cnt]); - flush_warnings((struct dquot **)inode->i_dquot, warntype); + flush_warnings(inode->i_dquot, warntype); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); return ret; } diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c index 263fed88c0c..f458c1f3556 100644 --- a/fs/ecryptfs/keystore.c +++ b/fs/ecryptfs/keystore.c @@ -1860,7 +1860,7 @@ ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat, struct ecryptfs_global_auth_tok *new_auth_tok; int rc = 0; - new_auth_tok = kmem_cache_alloc(ecryptfs_global_auth_tok_cache, + new_auth_tok = kmem_cache_zalloc(ecryptfs_global_auth_tok_cache, GFP_KERNEL); if (!new_auth_tok) { rc = -ENOMEM; diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index b83a512b7e0..a277754da17 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -523,6 +523,7 @@ static int ecryptfs_read_super(struct super_block *sb, const char *dev_name) lower_mnt = nd.mnt; ecryptfs_set_superblock_lower(sb, lower_root->d_sb); sb->s_maxbytes = lower_root->d_sb->s_maxbytes; + sb->s_blocksize = lower_root->d_sb->s_blocksize; ecryptfs_set_dentry_lower(sb->s_root, lower_root); ecryptfs_set_dentry_lower_mnt(sb->s_root, lower_mnt); rc = ecryptfs_interpose(lower_root, sb->s_root, sb, 0); diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c index 16a7a555f39..32c5711d79a 100644 --- a/fs/ecryptfs/mmap.c +++ b/fs/ecryptfs/mmap.c @@ -263,14 +263,13 @@ out: return 0; } +/* This function must zero any hole we create */ static int ecryptfs_prepare_write(struct file *file, struct page *page, unsigned from, unsigned to) { int rc = 0; + loff_t prev_page_end_size; - if (from == 0 && to == PAGE_CACHE_SIZE) - goto out; /* If we are writing a full page, it will be - up to date. */ if (!PageUptodate(page)) { rc = ecryptfs_read_lower_page_segment(page, page->index, 0, PAGE_CACHE_SIZE, @@ -283,22 +282,32 @@ static int ecryptfs_prepare_write(struct file *file, struct page *page, } else SetPageUptodate(page); } - if (page->index != 0) { - loff_t end_of_prev_pg_pos = - (((loff_t)page->index << PAGE_CACHE_SHIFT) - 1); - if (end_of_prev_pg_pos > i_size_read(page->mapping->host)) { + prev_page_end_size = ((loff_t)page->index << PAGE_CACHE_SHIFT); + + /* + * If creating a page or more of holes, zero them out via truncate. + * Note, this will increase i_size. + */ + if (page->index != 0) { + if (prev_page_end_size > i_size_read(page->mapping->host)) { rc = ecryptfs_truncate(file->f_path.dentry, - end_of_prev_pg_pos); + prev_page_end_size); if (rc) { printk(KERN_ERR "Error on attempt to " "truncate to (higher) offset [%lld];" - " rc = [%d]\n", end_of_prev_pg_pos, rc); + " rc = [%d]\n", prev_page_end_size, rc); goto out; } } - if (end_of_prev_pg_pos + 1 > i_size_read(page->mapping->host)) - zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0); + } + /* + * Writing to a new page, and creating a small hole from start of page? + * Zero it out. + */ + if ((i_size_read(page->mapping->host) == prev_page_end_size) && + (from != 0)) { + zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0); } out: return rc; diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c index 6b7474a4336..948f57624c0 100644 --- a/fs/ecryptfs/read_write.c +++ b/fs/ecryptfs/read_write.c @@ -124,6 +124,10 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, loff_t pos; int rc = 0; + /* + * if we are writing beyond current size, then start pos + * at the current size - we'll fill in zeros from there. + */ if (offset > ecryptfs_file_size) pos = ecryptfs_file_size; else @@ -137,6 +141,7 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, if (num_bytes > total_remaining_bytes) num_bytes = total_remaining_bytes; if (pos < offset) { + /* remaining zeros to write, up to destination offset */ size_t total_remaining_zeros = (offset - pos); if (num_bytes > total_remaining_zeros) @@ -167,17 +172,27 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, } } ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0); + + /* + * pos: where we're now writing, offset: where the request was + * If current pos is before request, we are filling zeros + * If we are at or beyond request, we are writing the *data* + * If we're in a fresh page beyond eof, zero it in either case + */ + if (pos < offset || !start_offset_in_page) { + /* We are extending past the previous end of the file. + * Fill in zero values to the end of the page */ + memset(((char *)ecryptfs_page_virt + + start_offset_in_page), 0, + PAGE_CACHE_SIZE - start_offset_in_page); + } + + /* pos >= offset, we are now writing the data request */ if (pos >= offset) { memcpy(((char *)ecryptfs_page_virt + start_offset_in_page), (data + data_offset), num_bytes); data_offset += num_bytes; - } else { - /* We are extending past the previous end of the file. - * Fill in zero values up to the start of where we - * will be writing data. */ - memset(((char *)ecryptfs_page_virt - + start_offset_in_page), 0, num_bytes); } kunmap_atomic(ecryptfs_page_virt, KM_USER0); flush_dcache_page(ecryptfs_page); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index de55da9e28b..cb14de1502c 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -1676,7 +1676,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group); sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group); sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group); - if (EXT3_INODE_SIZE(sb) == 0) + if (EXT3_INODE_SIZE(sb) == 0 || EXT3_INODES_PER_GROUP(sb) == 0) goto cantfind_ext3; sbi->s_inodes_per_block = blocksize / EXT3_INODE_SIZE(sb); if (sbi->s_inodes_per_block == 0) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 8031dc0e24e..1ca0f546c46 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1797,7 +1797,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) sbi->s_desc_size = EXT4_MIN_DESC_SIZE; sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group); sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group); - if (EXT4_INODE_SIZE(sb) == 0) + if (EXT4_INODE_SIZE(sb) == 0 || EXT4_INODES_PER_GROUP(sb) == 0) goto cantfind_ext4; sbi->s_inodes_per_block = blocksize / EXT4_INODE_SIZE(sb); if (sbi->s_inodes_per_block == 0) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 70587f383f1..a6f62549761 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -410,9 +410,6 @@ static int nfs_create_rpc_client(struct nfs_client *clp, int proto, */ static void nfs_destroy_server(struct nfs_server *server) { - if (!IS_ERR(server->client_acl)) - rpc_shutdown_client(server->client_acl); - if (!(server->flags & NFS_MOUNT_NONLM)) lockd_down(); /* release rpc.lockd */ } @@ -755,6 +752,9 @@ void nfs_free_server(struct nfs_server *server) if (server->destroy != NULL) server->destroy(server); + + if (!IS_ERR(server->client_acl)) + rpc_shutdown_client(server->client_acl); if (!IS_ERR(server->client)) rpc_shutdown_client(server->client); diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 5e8d82f6666..3c9d16b4f80 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -894,8 +894,6 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, const struct iovec *iov, retval = generic_write_checks(file, &pos, &count, 0); if (retval) goto out; - if (!count) - goto out; /* return 0 */ retval = -EINVAL; if ((ssize_t) count < 0) diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c index 0ee43843f4e..e6242cdbaf9 100644 --- a/fs/nfs/getroot.c +++ b/fs/nfs/getroot.c @@ -57,6 +57,17 @@ static int nfs_superblock_set_dummy_root(struct super_block *sb, struct inode *i } /* Circumvent igrab(): we know the inode is not being freed */ atomic_inc(&inode->i_count); + /* + * Ensure that this dentry is invisible to d_find_alias(). + * Otherwise, it may be spliced into the tree by + * d_materialise_unique if a parent directory from the same + * filesystem gets mounted at a later time. + * This again causes shrink_dcache_for_umount_subtree() to + * Oops, since the test for IS_ROOT() will fail. + */ + spin_lock(&dcache_lock); + list_del_init(&sb->s_root->d_alias); + spin_unlock(&dcache_lock); } return 0; } diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 2426e713b77..ea929207f27 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1475,7 +1475,7 @@ static int nfs_xdev_get_sb(struct file_system_type *fs_type, int flags, error = PTR_ERR(mntroot); goto error_splat_super; } - if (mntroot->d_inode->i_op != &nfs_dir_inode_operations) { + if (mntroot->d_inode->i_op != server->nfs_client->rpc_ops->dir_inode_ops) { dput(mntroot); error = -ESTALE; goto error_splat_super; diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index ce62c152823..23c8cda43f1 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -2389,6 +2389,18 @@ static int __ocfs2_rotate_tree_left(struct inode *inode, goto out; } + /* + * Caller might still want to make changes to the + * tree root, so re-add it to the journal here. + */ + ret = ocfs2_journal_access(handle, inode, + path_root_bh(left_path), + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret) { + mlog_errno(ret); + goto out; + } + ret = ocfs2_rotate_subtree_left(inode, handle, left_path, right_path, subtree_root, dealloc, &deleted); @@ -3289,16 +3301,6 @@ static int ocfs2_insert_path(struct inode *inode, int ret, subtree_index; struct buffer_head *leaf_bh = path_leaf_bh(right_path); - /* - * Pass both paths to the journal. The majority of inserts - * will be touching all components anyway. - */ - ret = ocfs2_journal_access_path(inode, handle, right_path); - if (ret < 0) { - mlog_errno(ret); - goto out; - } - if (left_path) { int credits = handle->h_buffer_credits; @@ -3323,6 +3325,16 @@ static int ocfs2_insert_path(struct inode *inode, } } + /* + * Pass both paths to the journal. The majority of inserts + * will be touching all components anyway. + */ + ret = ocfs2_journal_access_path(inode, handle, right_path); + if (ret < 0) { + mlog_errno(ret); + goto out; + } + if (insert->ins_split != SPLIT_NONE) { /* * We could call ocfs2_insert_at_leaf() for some types @@ -3331,6 +3343,17 @@ static int ocfs2_insert_path(struct inode *inode, */ ocfs2_split_record(inode, left_path, right_path, insert_rec, insert->ins_split); + + /* + * Split might have modified either leaf and we don't + * have a guarantee that the later edge insert will + * dirty this for us. + */ + if (left_path) + ret = ocfs2_journal_dirty(handle, + path_leaf_bh(left_path)); + if (ret) + mlog_errno(ret); } else ocfs2_insert_at_leaf(insert_rec, path_leaf_el(right_path), insert, inode); @@ -3430,6 +3453,17 @@ static int ocfs2_do_insert_extent(struct inode *inode, mlog_errno(ret); goto out; } + + /* + * ocfs2_rotate_tree_right() might have extended the + * transaction without re-journaling our tree root. + */ + ret = ocfs2_journal_access(handle, inode, di_bh, + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret) { + mlog_errno(ret); + goto out; + } } else if (type->ins_appending == APPEND_TAIL && type->ins_contig != CONTIG_LEFT) { ret = ocfs2_append_rec_to_path(inode, handle, insert_rec, @@ -3941,7 +3975,7 @@ static int __ocfs2_mark_extent_written(struct inode *inode, { int ret = 0; struct ocfs2_extent_list *el = path_leaf_el(path); - struct buffer_head *eb_bh, *last_eb_bh = NULL; + struct buffer_head *last_eb_bh = NULL; struct ocfs2_extent_rec *rec = &el->l_recs[split_index]; struct ocfs2_merge_ctxt ctxt; struct ocfs2_extent_list *rightmost_el; @@ -3960,14 +3994,6 @@ static int __ocfs2_mark_extent_written(struct inode *inode, goto out; } - eb_bh = path_leaf_bh(path); - ret = ocfs2_journal_access(handle, inode, eb_bh, - OCFS2_JOURNAL_ACCESS_WRITE); - if (ret) { - mlog_errno(ret); - goto out; - } - ctxt.c_contig_type = ocfs2_figure_merge_contig_type(inode, el, split_index, split_rec); @@ -4029,8 +4055,6 @@ static int __ocfs2_mark_extent_written(struct inode *inode, mlog_errno(ret); } - ocfs2_journal_dirty(handle, eb_bh); - out: brelse(last_eb_bh); return ret; @@ -6093,8 +6117,6 @@ start: mlog(0, "clusters_to_del = %u in this pass, tail blk=%llu\n", clusters_to_del, (unsigned long long)path_leaf_bh(path)->b_blocknr); - BUG_ON(clusters_to_del == 0); - mutex_lock(&tl_inode->i_mutex); tl_sem = 1; /* ocfs2_truncate_log_needs_flush guarantees us at least one diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index f9d01e25298..8d81f6c1b87 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -174,6 +174,12 @@ int ocfs2_commit_trans(struct ocfs2_super *osb, * transaction. extend_trans will either extend the current handle by * nblocks, or commit it and start a new one with nblocks credits. * + * This might call journal_restart() which will commit dirty buffers + * and then restart the transaction. Before calling + * ocfs2_extend_trans(), any changed blocks should have been + * dirtied. After calling it, all blocks which need to be changed must + * go through another set of journal_access/journal_dirty calls. + * * WARNING: This will not release any semaphores or disk locks taken * during the transaction, so make sure they were taken *before* * start_trans or we'll have ordering deadlocks. @@ -193,11 +199,15 @@ int ocfs2_extend_trans(handle_t *handle, int nblocks) mlog(0, "Trying to extend transaction by %d blocks\n", nblocks); +#ifdef OCFS2_DEBUG_FS + status = 1; +#else status = journal_extend(handle, nblocks); if (status < 0) { mlog_errno(status); goto bail; } +#endif if (status > 0) { mlog(0, "journal_extend failed, trying journal_restart\n"); @@ -1277,11 +1287,12 @@ static int ocfs2_queue_orphans(struct ocfs2_super *osb, ocfs2_orphan_filldir); if (status) { mlog_errno(status); - goto out; + goto out_cluster; } *head = priv.head; +out_cluster: ocfs2_meta_unlock(orphan_dir_inode, 0); out: mutex_unlock(&orphan_dir_inode->i_mutex); diff --git a/fs/proc/generic.c b/fs/proc/generic.c index 8d49838e555..6a2fe5187b6 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -374,16 +374,9 @@ static int proc_delete_dentry(struct dentry * dentry) return 1; } -static int proc_revalidate_dentry(struct dentry *dentry, struct nameidata *nd) -{ - d_drop(dentry); - return 0; -} - static struct dentry_operations proc_dentry_operations = { .d_delete = proc_delete_dentry, - .d_revalidate = proc_revalidate_dentry, }; /* diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c index 54c564693d9..4847eb83fc1 100644 --- a/fs/xfs/linux-2.6/xfs_file.c +++ b/fs/xfs/linux-2.6/xfs_file.c @@ -347,6 +347,7 @@ xfs_file_readdir( size = buf.used; de = (struct hack_dirent *)buf.dirent; + curr_offset = de->offset /* & 0x7fffffff */; while (size > 0) { if (filldir(dirent, de->name, de->namlen, curr_offset & 0x7fffffff, @@ -356,13 +357,13 @@ xfs_file_readdir( reclen = sizeof(struct hack_dirent) + de->namlen; size -= reclen; - curr_offset = de->offset /* & 0x7fffffff */; de = (struct hack_dirent *)((char *)de + reclen); + curr_offset = de->offset /* & 0x7fffffff */; } } done: - if (!error) { + if (!error) { if (size == 0) filp->f_pos = offset & 0x7fffffff; else if (de) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 37e116779eb..5e8bb7f71b5 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -332,9 +332,7 @@ xfs_vn_mknod( ASSERT(vp); ip = vn_to_inode(vp); - if (S_ISCHR(mode) || S_ISBLK(mode)) - ip->i_rdev = rdev; - else if (S_ISDIR(mode)) + if (S_ISDIR(mode)) xfs_validate_fields(ip); d_instantiate(dentry, ip); xfs_validate_fields(dir); diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index c171767e242..a5f4f4fb886 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -508,7 +508,7 @@ xfs_dir2_block_getdents( continue; cook = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, - ptr - (char *)block); + (char *)dep - (char *)block); ino = be64_to_cpu(dep->inumber); #if XFS_BIG_INUMS ino += mp->m_inoadd; @@ -519,9 +519,7 @@ xfs_dir2_block_getdents( */ if (filldir(dirent, dep->name, dep->namelen, cook, ino, DT_UNKNOWN)) { - *offset = xfs_dir2_db_off_to_dataptr(mp, - mp->m_dirdatablk, - (char *)dep - (char *)block); + *offset = cook; xfs_da_brelse(NULL, bp); return 0; } diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index e7c12fa1303..0ca0020ba09 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1091,7 +1091,7 @@ xfs_dir2_leaf_getdents( * Won't fit. Return to caller. */ if (filldir(dirent, dep->name, dep->namelen, - xfs_dir2_byte_to_dataptr(mp, curoff + length), + xfs_dir2_byte_to_dataptr(mp, curoff), ino, DT_UNKNOWN)) break; diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index 182c70315ad..919d275a1ce 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -752,7 +752,7 @@ xfs_dir2_sf_getdents( #if XFS_BIG_INUMS ino += mp->m_inoadd; #endif - if (filldir(dirent, ".", 1, dotdot_offset, ino, DT_DIR)) { + if (filldir(dirent, ".", 1, dot_offset, ino, DT_DIR)) { *offset = dot_offset; return 0; } @@ -762,13 +762,11 @@ xfs_dir2_sf_getdents( * Put .. entry unless we're starting past it. */ if (*offset <= dotdot_offset) { - off = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, - XFS_DIR2_DATA_FIRST_OFFSET); ino = xfs_dir2_sf_get_inumber(sfp, &sfp->hdr.parent); #if XFS_BIG_INUMS ino += mp->m_inoadd; #endif - if (filldir(dirent, "..", 2, off, ino, DT_DIR)) { + if (filldir(dirent, "..", 2, dotdot_offset, ino, DT_DIR)) { *offset = dotdot_offset; return 0; } @@ -793,8 +791,7 @@ xfs_dir2_sf_getdents( #endif if (filldir(dirent, sfep->name, sfep->namelen, - off + xfs_dir2_data_entsize(sfep->namelen), - ino, DT_UNKNOWN)) { + off, ino, DT_UNKNOWN)) { *offset = off; return 0; } diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index abf509a8891..34494808281 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1459,8 +1459,10 @@ xfs_itruncate_start( mp = ip->i_mount; vp = XFS_ITOV(ip); - vn_iowait(ip); /* wait for the completion of any pending DIOs */ - + /* wait for the completion of any pending DIOs */ + if (new_size < ip->i_size) + vn_iowait(ip); + /* * Call toss_pages or flushinval_pages to get rid of pages * overlapping the region being removed. We have to use diff --git a/include/asm-alpha/io_trivial.h b/include/asm-alpha/io_trivial.h index b10d1aa4cdd..1c77f10b4b3 100644 --- a/include/asm-alpha/io_trivial.h +++ b/include/asm-alpha/io_trivial.h @@ -72,25 +72,29 @@ IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a) __EXTERN_INLINE u8 IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a) { - return IO_CONCAT(__IO_PREFIX,ioread8)((void __iomem *)a); + void __iomem *addr = (void __iomem *)a; + return IO_CONCAT(__IO_PREFIX,ioread8)(addr); } __EXTERN_INLINE u16 IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a) { - return IO_CONCAT(__IO_PREFIX,ioread16)((void __iomem *)a); + void __iomem *addr = (void __iomem *)a; + return IO_CONCAT(__IO_PREFIX,ioread16)(addr); } __EXTERN_INLINE void IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a) { - IO_CONCAT(__IO_PREFIX,iowrite8)(b, (void __iomem *)a); + void __iomem *addr = (void __iomem *)a; + IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr); } __EXTERN_INLINE void IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a) { - IO_CONCAT(__IO_PREFIX,iowrite16)(b, (void __iomem *)a); + void __iomem *addr = (void __iomem *)a; + IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr); } #endif diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 6b33df6f199..1bd398da07d 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1784,6 +1784,7 @@ #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ #define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ #define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ #define CKEN_MEMC (22) /* Memory Controller Clock Enable */ diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index f490e43a90b..799307eea40 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -14,6 +14,7 @@ #define _ASM_GENERIC__TLB_H #include <linux/swap.h> +#include <linux/quicklist.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> @@ -85,6 +86,9 @@ tlb_flush_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { +#ifdef CONFIG_QUICKLIST + tlb->need_flush += &__get_cpu_var(quicklist)[0].nr_pages != 0; +#endif tlb_flush_mmu(tlb, start, end); /* keep the page table cache within bounds */ diff --git a/include/asm-h8300/timex.h b/include/asm-h8300/timex.h index 20413145fab..23e67013439 100644 --- a/include/asm-h8300/timex.h +++ b/include/asm-h8300/timex.h @@ -6,7 +6,7 @@ #ifndef _ASM_H8300_TIMEX_H #define _ASM_H8300_TIMEX_H -#define CLOCK_TICK_RATE CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ +#define CLOCK_TICK_RATE (CONFIG_CPU_CLOCK*1000/8192) /* Timer input freq. */ typedef unsigned long cycles_t; extern short h8300_timer_count; diff --git a/include/asm-ia64/bitops.h b/include/asm-ia64/bitops.h index a977affaebe..a1b9719f5fb 100644 --- a/include/asm-ia64/bitops.h +++ b/include/asm-ia64/bitops.h @@ -124,10 +124,21 @@ clear_bit_unlock (int nr, volatile void *addr) /** * __clear_bit_unlock - Non-atomically clear a bit with release * - * This is like clear_bit_unlock, but the implementation may use a non-atomic - * store (this one uses an atomic, however). + * This is like clear_bit_unlock, but the implementation uses a store + * with release semantics. See also __raw_spin_unlock(). */ -#define __clear_bit_unlock clear_bit_unlock +static __inline__ void +__clear_bit_unlock(int nr, volatile void *addr) +{ + __u32 mask, new; + volatile __u32 *m; + + m = (volatile __u32 *)addr + (nr >> 5); + mask = ~(1 << (nr & 31)); + new = *m & mask; + barrier(); + ia64_st4_rel_nta(m, new); +} /** * __clear_bit - Clears a bit in memory (non-atomic version) diff --git a/include/asm-ia64/gcc_intrin.h b/include/asm-ia64/gcc_intrin.h index 4fb4e439b05..e58d3298fa1 100644 --- a/include/asm-ia64/gcc_intrin.h +++ b/include/asm-ia64/gcc_intrin.h @@ -191,6 +191,11 @@ register unsigned long ia64_r13 asm ("r13") __attribute_used__; asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x)); \ }) +#define ia64_st4_rel_nta(m, val) \ +({ \ + asm volatile ("st4.rel.nta [%0] = %1\n\t" :: "r"(m), "r"(val)); \ +}) + #define ia64_stfs(x, regnum) \ ({ \ register double __f__ asm ("f"#regnum); \ diff --git a/include/asm-ia64/hw_irq.h b/include/asm-ia64/hw_irq.h index bba5baa3c7f..7e6e3779670 100644 --- a/include/asm-ia64/hw_irq.h +++ b/include/asm-ia64/hw_irq.h @@ -63,7 +63,7 @@ extern int ia64_last_device_vector; #define IA64_NUM_DEVICE_VECTORS (IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1) #define IA64_MCA_RENDEZ_VECTOR 0xe8 /* MCA rendez interrupt */ -#define IA64_PERFMON_VECTOR 0xee /* performanc monitor interrupt vector */ +#define IA64_PERFMON_VECTOR 0xee /* performance monitor interrupt vector */ #define IA64_TIMER_VECTOR 0xef /* use highest-prio group 15 interrupt for timer */ #define IA64_MCA_WAKEUP_VECTOR 0xf0 /* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */ #define IA64_IPI_LOCAL_TLB_FLUSH 0xfc /* SMP flush local TLB */ diff --git a/include/asm-ia64/intel_intrin.h b/include/asm-ia64/intel_intrin.h index d069b6acddc..a520d103d80 100644 --- a/include/asm-ia64/intel_intrin.h +++ b/include/asm-ia64/intel_intrin.h @@ -110,6 +110,9 @@ #define ia64_st4_rel __st4_rel #define ia64_st8_rel __st8_rel +/* FIXME: need st4.rel.nta intrinsic */ +#define ia64_st4_rel_nta __st4_rel + #define ia64_ld1_acq __ld1_acq #define ia64_ld2_acq __ld2_acq #define ia64_ld4_acq __ld4_acq diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h index 5335d87ca5f..a0d214f4311 100644 --- a/include/asm-ia64/sn/bte.h +++ b/include/asm-ia64/sn/bte.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. */ @@ -150,6 +150,35 @@ typedef enum { BTEFAIL_NOTAVAIL, /* BTE not available */ } bte_result_t; +#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */ +#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */ +#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */ +#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */ +#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */ +#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */ +#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */ + +#define BTE_ERR_BITS 0x3FUL +#define BTE_ERR_SHIFT 36 +#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT) + +#define BTE_ERROR_RETRY(value) \ + (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \ + : (value != BTEFAIL_TOUT)) + +/* + * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2() + */ +#define BTE_SHUB2_ERROR(_status) \ + ((_status & BTE_ERR_MASK) \ + ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \ + : _status) + +#define BTE_GET_ERROR_STATUS(_status) \ + (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR) + +#define BTE_VALID_SH2_ERROR(value) \ + ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL)) /* * Structure defining a bte. An instance of this diff --git a/include/asm-ia64/sn/xp.h b/include/asm-ia64/sn/xp.h index 6f807e0193b..f7711b308e4 100644 --- a/include/asm-ia64/sn/xp.h +++ b/include/asm-ia64/sn/xp.h @@ -86,7 +86,7 @@ xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification) BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL); ret = bte_copy(src, pdst, len, mode, notification); - if (ret != BTE_SUCCESS) { + if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) { if (!in_interrupt()) { cond_resched(); } @@ -244,7 +244,30 @@ enum xpc_retval { xpcDisconnected, /* 51: channel disconnected (closed) */ - xpcUnknownReason /* 52: unknown reason -- must be last in list */ + xpcBteSh2Start, /* 52: BTE CRB timeout */ + + /* 53: 0x1 BTE Error Response Short */ + xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT, + + /* 54: 0x2 BTE Error Response Long */ + xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG, + + /* 56: 0x4 BTE Error Response DSB */ + xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP, + + /* 60: 0x8 BTE Error Response Access */ + xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS, + + /* 68: 0x10 BTE Error CRB timeout */ + xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO, + + /* 84: 0x20 BTE Error NACK limit */ + xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT, + + /* 115: BTE end */ + xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL, + + xpcUnknownReason /* 116: unknown reason -- must be last in list */ }; diff --git a/include/asm-ia64/sn/xpc.h b/include/asm-ia64/sn/xpc.h index e52b8508083..8e5d7de9c63 100644 --- a/include/asm-ia64/sn/xpc.h +++ b/include/asm-ia64/sn/xpc.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2004-2007 Silicon Graphics, Inc. All Rights Reserved. */ @@ -1211,6 +1211,12 @@ xpc_IPI_init(int index) static inline enum xpc_retval xpc_map_bte_errors(bte_result_t error) { + if (is_shub2()) { + if (BTE_VALID_SH2_ERROR(error)) + return xpcBteSh2Start + error; + else + return xpcBteUnmappedError; + } switch (error) { case BTE_SUCCESS: return xpcSuccess; case BTEFAIL_DIR: return xpcBteDirectoryError; diff --git a/include/asm-ia64/tlbflush.h b/include/asm-ia64/tlbflush.h index 80bcb0a38e8..7774a1cac0c 100644 --- a/include/asm-ia64/tlbflush.h +++ b/include/asm-ia64/tlbflush.h @@ -92,6 +92,10 @@ void smp_local_flush_tlb(void); #define smp_local_flush_tlb() #endif -#define flush_tlb_kernel_range(start, end) flush_tlb_all() /* XXX fix me */ +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + flush_tlb_all(); /* XXX fix me */ +} #endif /* _ASM_IA64_TLBFLUSH_H */ diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index bf7701243d7..cb18af98964 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -1680,10 +1680,11 @@ enum soc_au1200_ints { #define Au1500_PCI_MEM_START 0x440000000ULL #define Au1500_PCI_MEM_END 0x44FFFFFFFULL -#define PCI_IO_START (Au1500_PCI_IO_START + 0x1000) -#define PCI_IO_END (Au1500_PCI_IO_END) -#define PCI_MEM_START (Au1500_PCI_MEM_START) -#define PCI_MEM_END (Au1500_PCI_MEM_END) +#define PCI_IO_START 0x00001000 +#define PCI_IO_END 0x000FFFFF +#define PCI_MEM_START 0x40000000 +#define PCI_MEM_END 0x4FFFFFFF + #define PCI_FIRST_DEVFN (0<<3) #define PCI_LAST_DEVFN (19<<3) diff --git a/include/asm-mips/mach-au1x00/au1100_mmc.h b/include/asm-mips/mach-au1x00/au1100_mmc.h index 9e7d1ba21b5..9e0028f60a4 100644 --- a/include/asm-mips/mach-au1x00/au1100_mmc.h +++ b/include/asm-mips/mach-au1x00/au1100_mmc.h @@ -41,8 +41,11 @@ #define NUM_AU1100_MMC_CONTROLLERS 2 - -#define AU1100_SD_IRQ 2 +#if defined(CONFIG_SOC_AU1100) +#define AU1100_SD_IRQ AU1100_SD_INT +#elif defined(CONFIG_SOC_AU1200) +#define AU1100_SD_IRQ AU1200_SD_INT +#endif #define SD0_BASE 0xB0600000 diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h index 0e192cc3ead..9e3b8648648 100644 --- a/include/asm-powerpc/commproc.h +++ b/include/asm-powerpc/commproc.h @@ -698,9 +698,6 @@ typedef struct risc_timer_pram { #define CICR_IEN ((uint)0x00000080) /* Int. enable */ #define CICR_SPS ((uint)0x00000001) /* SCC Spread */ -extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); -extern void cpm_free_handler(int vec); - #define IMAP_ADDR (get_immrbase()) #define CPM_PIN_INPUT 0 diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h index f2cc25b74ad..1f530f8a628 100644 --- a/include/asm-s390/pgtable.h +++ b/include/asm-s390/pgtable.h @@ -453,12 +453,12 @@ static inline int pgd_bad(pgd_t pgd) { return 0; } static inline int pud_present(pud_t pud) { - return pud_val(pud) & _REGION_ENTRY_ORIGIN; + return (pud_val(pud) & _REGION_ENTRY_ORIGIN) != 0UL; } static inline int pud_none(pud_t pud) { - return pud_val(pud) & _REGION_ENTRY_INV; + return (pud_val(pud) & _REGION_ENTRY_INV) != 0UL; } static inline int pud_bad(pud_t pud) @@ -471,12 +471,12 @@ static inline int pud_bad(pud_t pud) static inline int pmd_present(pmd_t pmd) { - return pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN; + return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL; } static inline int pmd_none(pmd_t pmd) { - return pmd_val(pmd) & _SEGMENT_ENTRY_INV; + return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL; } static inline int pmd_bad(pmd_t pmd) diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h index 029b3e0d5e4..0decdf76371 100644 --- a/include/asm-sparc/unistd.h +++ b/include/asm-sparc/unistd.h @@ -333,6 +333,15 @@ #define NR_SYSCALLS 315 +/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, + * it never had the plain ones and there is no value to adding those + * old versions into the syscall table. + */ +#define __IGNORE_setresuid +#define __IGNORE_getresuid +#define __IGNORE_setresgid +#define __IGNORE_getresgid + #ifdef __KERNEL__ #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h index 524d49835df..3ad45dff52f 100644 --- a/include/asm-sparc64/hypervisor.h +++ b/include/asm-sparc64/hypervisor.h @@ -709,6 +709,10 @@ extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, */ #define HV_FAST_MMU_DEMAP_ALL 0x24 +#ifndef __ASSEMBLY__ +extern void sun4v_mmu_demap_all(void); +#endif + /* mmu_map_perm_addr() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR diff --git a/include/asm-x86/kprobes_32.h b/include/asm-x86/kprobes_32.h index b772d5b3868..9fe8f3bddfd 100644 --- a/include/asm-x86/kprobes_32.h +++ b/include/asm-x86/kprobes_32.h @@ -73,7 +73,7 @@ struct kprobe_ctlblk { unsigned long kprobe_status; unsigned long kprobe_old_eflags; unsigned long kprobe_saved_eflags; - long *jprobe_saved_esp; + unsigned long *jprobe_saved_esp; struct pt_regs jprobe_saved_regs; kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; struct prev_kprobe prev_kprobe; diff --git a/include/asm-x86/kprobes_64.h b/include/asm-x86/kprobes_64.h index 53f4d850735..743d76218fc 100644 --- a/include/asm-x86/kprobes_64.h +++ b/include/asm-x86/kprobes_64.h @@ -66,7 +66,7 @@ struct kprobe_ctlblk { unsigned long kprobe_status; unsigned long kprobe_old_rflags; unsigned long kprobe_saved_rflags; - long *jprobe_saved_rsp; + unsigned long *jprobe_saved_rsp; struct pt_regs jprobe_saved_regs; kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; struct prev_kprobe prev_kprobe; diff --git a/include/asm-x86/system_64.h b/include/asm-x86/system_64.h index 4cb23848d46..6e9e4841a2d 100644 --- a/include/asm-x86/system_64.h +++ b/include/asm-x86/system_64.h @@ -7,6 +7,13 @@ #ifdef __KERNEL__ +/* entries in ARCH_DLINFO: */ +#ifdef CONFIG_IA32_EMULATION +# define AT_VECTOR_SIZE_ARCH 2 +#else +# define AT_VECTOR_SIZE_ARCH 1 +#endif + #define __SAVE(reg,offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t" #define __RESTORE(reg,offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t" diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 37bfa19d806..9abf5a806c1 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -145,7 +145,6 @@ header-y += sound.h header-y += taskstats.h header-y += telephony.h header-y += termios.h -header-y += ticable.h header-y += times.h header-y += tiocl.h header-y += tipc.h diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h index 9754baa1492..01a6244c9bc 100644 --- a/include/linux/apm_bios.h +++ b/include/linux/apm_bios.h @@ -18,6 +18,9 @@ #include <linux/types.h> +typedef unsigned short apm_event_t; +typedef unsigned short apm_eventinfo_t; + struct apm_bios_info { __u16 version; __u16 cseg; @@ -32,9 +35,6 @@ struct apm_bios_info { #ifdef __KERNEL__ -typedef unsigned short apm_event_t; -typedef unsigned short apm_eventinfo_t; - #define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8) #define APM_CS_16 (APM_CS + 8) #define APM_DS (APM_CS_16 + 8) diff --git a/include/linux/ata.h b/include/linux/ata.h index 5c4e54a2a8d..72ab80801ef 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -190,6 +190,8 @@ enum { ATA_CMD_READ_LOG_EXT = 0x2f, ATA_CMD_PMP_READ = 0xE4, ATA_CMD_PMP_WRITE = 0xE8, + ATA_CMD_CONF_OVERLAY = 0xB1, + ATA_CMD_SEC_FREEZE_LOCK = 0xF5, /* READ_LOG_EXT pages */ ATA_LOG_SATA_NCQ = 0x10, @@ -239,6 +241,19 @@ enum { SATA_AN = 0x05, /* Asynchronous Notification */ SATA_DIPM = 0x03, /* Device Initiated Power Management */ + /* feature values for SET_MAX */ + ATA_SET_MAX_ADDR = 0x00, + ATA_SET_MAX_PASSWD = 0x01, + ATA_SET_MAX_LOCK = 0x02, + ATA_SET_MAX_UNLOCK = 0x03, + ATA_SET_MAX_FREEZE_LOCK = 0x04, + + /* feature values for DEVICE CONFIGURATION OVERLAY */ + ATA_DCO_RESTORE = 0xC0, + ATA_DCO_FREEZE_LOCK = 0xC1, + ATA_DCO_IDENTIFY = 0xC2, + ATA_DCO_SET = 0xC3, + /* ATAPI stuff */ ATAPI_PKT_DMA = (1 << 0), ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index b8b7c51389f..e765e191663 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -115,6 +115,7 @@ struct io_restrictions { unsigned short max_hw_segments; unsigned short hardsect_size; unsigned int max_segment_size; + unsigned int max_hw_sectors; unsigned long seg_boundary_mask; unsigned long bounce_pfn; unsigned char no_cluster; /* inverted so that 0 is default */ diff --git a/include/linux/elevator.h b/include/linux/elevator.h index e8f42133a61..639624b55fb 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -119,7 +119,7 @@ extern void elv_put_request(struct request_queue *, struct request *); /* * io scheduler registration */ -extern int elv_register(struct elevator_type *); +extern void elv_register(struct elevator_type *); extern void elv_unregister(struct elevator_type *); /* diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 24968790bc3..30d606afcaf 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -33,7 +33,7 @@ void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed); extern unsigned long max_huge_pages; extern unsigned long hugepages_treat_as_movable; -extern int hugetlb_dynamic_pool; +extern unsigned long nr_overcommit_huge_pages; extern const unsigned long hugetlb_zero, hugetlb_infinity; extern int sysctl_hugetlb_shm_group; diff --git a/include/linux/ide.h b/include/linux/ide.h index dc75ccbcf99..9a6a41e7079 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1255,6 +1255,7 @@ int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *); #ifdef CONFIG_BLK_DEV_IDEDMA int __ide_dma_bad_drive(ide_drive_t *); +int ide_id_dma_bug(ide_drive_t *); u8 ide_find_dma_mode(ide_drive_t *, u8); @@ -1264,7 +1265,6 @@ static inline u8 ide_max_dma_mode(ide_drive_t *drive) } void ide_dma_off(ide_drive_t *); -void ide_dma_verbose(ide_drive_t *); int ide_set_dma(ide_drive_t *); ide_startstop_t ide_dma_intr(ide_drive_t *); @@ -1287,6 +1287,7 @@ extern void ide_dma_timeout(ide_drive_t *); #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ #else +static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; } static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; } static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; } static inline void ide_dma_off(ide_drive_t *drive) { ; } @@ -1333,8 +1334,7 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data) hwif->hwif_data = data; } -/* ide-lib.c */ -extern char *ide_xfer_verbose(u8 xfer_rate); +const char *ide_xfer_verbose(u8 mode); extern void ide_toggle_bounce(ide_drive_t *drive, int on); extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate); diff --git a/include/linux/irq.h b/include/linux/irq.h index efc88538b2b..4669be08061 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -339,6 +339,13 @@ extern void __set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained, const char *name); +/* caller has locked the irq_desc and both params are valid */ +static inline void __set_irq_handler_unlocked(int irq, + irq_flow_handler_t handler) +{ + irq_desc[irq].handle_irq = handler; +} + /* * Set a highlevel flow handler for a given IRQ: */ diff --git a/include/linux/libata.h b/include/linux/libata.h index ef52a07c43d..124033cb5e9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -119,6 +119,8 @@ enum { ATA_DEF_BUSY_WAIT = 10000, ATA_SHORT_PAUSE = (HZ >> 6) + 1, + ATAPI_MAX_DRAIN = 16 << 10, + ATA_SHT_EMULATED = 1, ATA_SHT_CMD_PER_LUN = 1, ATA_SHT_THIS_ID = -1, @@ -211,7 +213,7 @@ enum { ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ - ATA_PFLAG_GTM_VALID = (1 << 19), /* acpi_gtm data valid */ + ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */ /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ @@ -498,6 +500,7 @@ struct ata_device { struct scsi_device *sdev; /* attached SCSI device */ #ifdef CONFIG_ATA_ACPI acpi_handle acpi_handle; + union acpi_object *gtf_cache; #endif /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */ u64 n_sectors; /* size of device, if ATA */ @@ -653,7 +656,7 @@ struct ata_port { #ifdef CONFIG_ATA_ACPI acpi_handle acpi_handle; - struct ata_acpi_gtm acpi_gtm; + struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ }; @@ -939,10 +942,20 @@ enum { /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI +static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) +{ + if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID) + return &ap->__acpi_init_gtm; + return NULL; +} extern int ata_acpi_cbl_80wire(struct ata_port *ap); -int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm); -int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm); +int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm); +int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm); #else +static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) +{ + return NULL; +} static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; } #endif @@ -1013,18 +1026,18 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, * printk helpers */ #define ata_port_printk(ap, lv, fmt, args...) \ - printk(lv"ata%u: "fmt, (ap)->print_id , ##args) + printk("%sata%u: "fmt, lv, (ap)->print_id , ##args) #define ata_link_printk(link, lv, fmt, args...) do { \ if ((link)->ap->nr_pmp_links) \ - printk(lv"ata%u.%02u: "fmt, (link)->ap->print_id, \ + printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \ (link)->pmp , ##args); \ else \ - printk(lv"ata%u: "fmt, (link)->ap->print_id , ##args); \ + printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \ } while(0) #define ata_dev_printk(dev, lv, fmt, args...) \ - printk(lv"ata%u.%02u: "fmt, (dev)->link->ap->print_id, \ + printk("%sata%u.%02u: "fmt, lv, (dev)->link->ap->print_id, \ (dev)->link->pmp + (dev)->devno , ##args) /* diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 125eee1407f..7ab962fa1d7 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -118,10 +118,6 @@ struct mmc_host { unsigned int removed:1; /* host is being removed */ #endif - unsigned int mode; /* current card mode of host */ -#define MMC_MODE_MMC 0 -#define MMC_MODE_SD 1 - struct mmc_card *card; /* device attached to this host */ wait_queue_head_t wq; diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index 533ee351a27..499aa937590 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -50,7 +50,8 @@ enum nf_br_hook_priorities { extern int nf_bridge_copy_header(struct sk_buff *skb); static inline int nf_bridge_maybe_copy_header(struct sk_buff *skb) { - if (skb->nf_bridge) + if (skb->nf_bridge && + skb->nf_bridge->mask & (BRNF_BRIDGED | BRNF_BRIDGED_DNAT)) return nf_bridge_copy_header(skb); return 0; } diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 111aa10f113..023656d2f1d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2148,6 +2148,7 @@ #define PCI_DEVICE_ID_JMICRON_JMB365 0x2365 #define PCI_DEVICE_ID_JMICRON_JMB366 0x2366 #define PCI_DEVICE_ID_JMICRON_JMB368 0x2368 +#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381 #define PCI_VENDOR_ID_KORENIX 0x1982 #define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600 diff --git a/include/linux/ticable.h b/include/linux/ticable.h deleted file mode 100644 index 8c2212086dc..00000000000 --- a/include/linux/ticable.h +++ /dev/null @@ -1,44 +0,0 @@ -/* Hey EMACS -*- linux-c -*- - * - * tipar/tiser/tiusb - low level driver for handling link cables - * designed for Texas Instruments graphing calculators. - * - * Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org> - * - * Redistribution of this file is permitted under the terms of the GNU - * Public License (GPL) - */ - -#ifndef _TICABLE_H -#define _TICABLE_H 1 - -/* Internal default constants for the kernel module */ -#define TIMAXTIME 15 /* 1.5 seconds */ -#define IO_DELAY 10 /* 10 micro-seconds */ - -/* Major & minor number for character devices */ -#define TIPAR_MAJOR 115 /* 0 to 7 */ -#define TIPAR_MINOR 0 - -#define TISER_MAJOR 115 /* 8 to 15 */ -#define TISER_MINOR 8 - -#define TIUSB_MAJOR 115 /* 16 to 31 */ -#define TIUSB_MINOR 16 - -/* - * Request values for the 'ioctl' function. - */ -#define IOCTL_TIPAR_DELAY _IOW('p', 0xa8, int) /* set delay */ -#define IOCTL_TIPAR_TIMEOUT _IOW('p', 0xa9, int) /* set timeout */ - -#define IOCTL_TISER_DELAY _IOW('p', 0xa0, int) /* set delay */ -#define IOCTL_TISER_TIMEOUT _IOW('p', 0xa1, int) /* set timeout */ - -#define IOCTL_TIUSB_TIMEOUT _IOW('N', 0x20, int) /* set timeout */ -#define IOCTL_TIUSB_RESET_DEVICE _IOW('N', 0x21, int) /* reset device */ -#define IOCTL_TIUSB_RESET_PIPES _IOW('N', 0x22, int) /* reset both pipes*/ -#define IOCTL_TIUSB_GET_MAXPS _IOR('N', 0x23, int) /* max packet size */ -#define IOCTL_TIUSB_GET_DEVID _IOR('N', 0x24, int) /* get device type */ - -#endif /* TICABLE_H */ diff --git a/include/linux/usb.h b/include/linux/usb.h index 416ee7617d9..5fc8ff73b7b 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -107,6 +107,7 @@ enum usb_interface_condition { * @condition: binding state of the interface: not bound, binding * (in probe()), bound to a driver, or unbinding (in disconnect()) * @is_active: flag set when the interface is bound and not suspended. + * @sysfs_files_created: sysfs attributes exist * @needs_remote_wakeup: flag set when the driver requires remote-wakeup * capability during autosuspend. * @dev: driver model's view of this device diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 1b792b9286b..a417b09b8b3 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -48,7 +48,10 @@ US_FLAG(IGNORE_DEVICE, 0x00000800) \ /* Don't claim device */ \ US_FLAG(CAPACITY_HEURISTICS, 0x00001000) \ - /* sometimes sizes is too big */ + /* sometimes sizes is too big */ \ + US_FLAG(MAX_SECTORS_MIN,0x00002000) \ + /* Sets max_sectors to arch min */ + #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h index 0fa5d591255..4fd5d0eaa93 100644 --- a/include/media/videobuf-core.h +++ b/include/media/videobuf-core.h @@ -208,6 +208,8 @@ int videobuf_cgmbuf(struct videobuf_queue *q, int videobuf_streamon(struct videobuf_queue *q); int videobuf_streamoff(struct videobuf_queue *q); +void videobuf_stop(struct videobuf_queue *q); + int videobuf_read_start(struct videobuf_queue *q); void videobuf_read_stop(struct videobuf_queue *q); ssize_t videobuf_read_stream(struct videobuf_queue *q, diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 66e9058357e..6c2d80b36aa 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -242,6 +242,9 @@ extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *, uint); extern void starget_for_each_device(struct scsi_target *, void *, void (*fn)(struct scsi_device *, void *)); +extern void __starget_for_each_device(struct scsi_target *, void *, + void (*fn)(struct scsi_device *, + void *)); /* only exposed to implement shost_for_each_device */ extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *, diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index 9b5dff6b3f6..44019ce30a1 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -297,18 +297,13 @@ handle_simple_irq(unsigned int irq, struct irq_desc *desc) if (unlikely(desc->status & IRQ_INPROGRESS)) goto out_unlock; + desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); kstat_cpu(cpu).irqs[irq]++; action = desc->action; - if (unlikely(!action || (desc->status & IRQ_DISABLED))) { - if (desc->chip->mask) - desc->chip->mask(irq); - desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); - desc->status |= IRQ_PENDING; + if (unlikely(!action || (desc->status & IRQ_DISABLED))) goto out_unlock; - } - desc->status &= ~(IRQ_REPLAY | IRQ_WAITING | IRQ_PENDING); desc->status |= IRQ_INPROGRESS; spin_unlock(&desc->lock); diff --git a/kernel/panic.c b/kernel/panic.c index 6f6e03e9159..da4d6bac270 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -19,6 +19,7 @@ #include <linux/nmi.h> #include <linux/kexec.h> #include <linux/debug_locks.h> +#include <linux/random.h> int panic_on_oops; int tainted; @@ -266,12 +267,29 @@ void oops_enter(void) } /* + * 64-bit random ID for oopses: + */ +static u64 oops_id; + +static int init_oops_id(void) +{ + if (!oops_id) + get_random_bytes(&oops_id, sizeof(oops_id)); + + return 0; +} +late_initcall(init_oops_id); + +/* * Called when the architecture exits its oops handler, after printing * everything. */ void oops_exit(void) { do_oops_enter_exit(); + init_oops_id(); + printk(KERN_WARNING "---[ end trace %016llx ]---\n", + (unsigned long long)oops_id); } #ifdef CONFIG_CC_STACKPROTECTOR diff --git a/kernel/rwsem.c b/kernel/rwsem.c index 1ec620c0306..cae050b05f5 100644 --- a/kernel/rwsem.c +++ b/kernel/rwsem.c @@ -6,6 +6,7 @@ #include <linux/types.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/module.h> #include <linux/rwsem.h> @@ -15,7 +16,7 @@ /* * lock for reading */ -void down_read(struct rw_semaphore *sem) +void __sched down_read(struct rw_semaphore *sem) { might_sleep(); rwsem_acquire_read(&sem->dep_map, 0, 0, _RET_IP_); @@ -42,7 +43,7 @@ EXPORT_SYMBOL(down_read_trylock); /* * lock for writing */ -void down_write(struct rw_semaphore *sem) +void __sched down_write(struct rw_semaphore *sem) { might_sleep(); rwsem_acquire(&sem->dep_map, 0, 0, _RET_IP_); diff --git a/kernel/sched.c b/kernel/sched.c index c6e551de795..3df84ea6aba 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -508,10 +508,15 @@ EXPORT_SYMBOL_GPL(cpu_clock); # define finish_arch_switch(prev) do { } while (0) #endif +static inline int task_current(struct rq *rq, struct task_struct *p) +{ + return rq->curr == p; +} + #ifndef __ARCH_WANT_UNLOCKED_CTXSW static inline int task_running(struct rq *rq, struct task_struct *p) { - return rq->curr == p; + return task_current(rq, p); } static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next) @@ -540,7 +545,7 @@ static inline int task_running(struct rq *rq, struct task_struct *p) #ifdef CONFIG_SMP return p->oncpu; #else - return rq->curr == p; + return task_current(rq, p); #endif } @@ -663,6 +668,7 @@ void sched_clock_idle_wakeup_event(u64 delta_ns) struct rq *rq = cpu_rq(smp_processor_id()); u64 now = sched_clock(); + touch_softlockup_watchdog(); rq->idle_clock += delta_ns; /* * Override the previous timestamp and ignore all @@ -3334,7 +3340,7 @@ unsigned long long task_sched_runtime(struct task_struct *p) rq = task_rq_lock(p, &flags); ns = p->se.sum_exec_runtime; - if (rq->curr == p) { + if (task_current(rq, p)) { update_rq_clock(rq); delta_exec = rq->clock - p->se.exec_start; if ((s64)delta_exec > 0) @@ -4021,7 +4027,7 @@ void rt_mutex_setprio(struct task_struct *p, int prio) oldprio = p->prio; on_rq = p->se.on_rq; - running = task_running(rq, p); + running = task_current(rq, p); if (on_rq) { dequeue_task(rq, p, 0); if (running) @@ -4332,7 +4338,7 @@ recheck: } update_rq_clock(rq); on_rq = p->se.on_rq; - running = task_running(rq, p); + running = task_current(rq, p); if (on_rq) { deactivate_task(rq, p, 0); if (running) @@ -7101,7 +7107,7 @@ void sched_move_task(struct task_struct *tsk) update_rq_clock(rq); - running = task_running(rq, tsk); + running = task_current(rq, tsk); on_rq = tsk->se.on_rq; if (on_rq) { diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index c33f0ceb3de..da7c061e720 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -511,8 +511,7 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial) if (!initial) { /* sleeps upto a single latency don't count. */ - if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se) && - task_of(se)->policy != SCHED_BATCH) + if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se)) vruntime -= sysctl_sched_latency; /* ensure we never gain time by being placed backwards. */ diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index ee9c8b6529e..9ba3daa0347 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -208,6 +208,8 @@ move_one_task_rt(struct rq *this_rq, int this_cpu, struct rq *busiest, static void task_tick_rt(struct rq *rq, struct task_struct *p) { + update_curr_rt(rq); + /* * RR tasks need a special form of timeslice management. * FIFO tasks have no timeslices. diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 8ac51714b08..c68f68dcc60 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -225,10 +225,10 @@ static struct ctl_table root_table[] = { }; #ifdef CONFIG_SCHED_DEBUG -static unsigned long min_sched_granularity_ns = 100000; /* 100 usecs */ -static unsigned long max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */ -static unsigned long min_wakeup_granularity_ns; /* 0 usecs */ -static unsigned long max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */ +static int min_sched_granularity_ns = 100000; /* 100 usecs */ +static int max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */ +static int min_wakeup_granularity_ns; /* 0 usecs */ +static int max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */ #endif static struct ctl_table kern_table[] = { @@ -906,11 +906,11 @@ static struct ctl_table vm_table[] = { }, { .ctl_name = CTL_UNNUMBERED, - .procname = "hugetlb_dynamic_pool", - .data = &hugetlb_dynamic_pool, - .maxlen = sizeof(hugetlb_dynamic_pool), + .procname = "nr_overcommit_hugepages", + .data = &nr_overcommit_huge_pages, + .maxlen = sizeof(nr_overcommit_huge_pages), .mode = 0644, - .proc_handler = &proc_dointvec, + .proc_handler = &proc_doulongvec_minmax, }, #endif { diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c index bed939f82c3..a68425a5cc1 100644 --- a/kernel/sysctl_check.c +++ b/kernel/sysctl_check.c @@ -428,7 +428,7 @@ static struct trans_ctl_table trans_net_netrom_table[] = { {} }; -static struct trans_ctl_table trans_net_ax25_table[] = { +static struct trans_ctl_table trans_net_ax25_param_table[] = { { NET_AX25_IP_DEFAULT_MODE, "ip_default_mode" }, { NET_AX25_DEFAULT_MODE, "ax25_default_mode" }, { NET_AX25_BACKOFF_TYPE, "backoff_type" }, @@ -446,6 +446,11 @@ static struct trans_ctl_table trans_net_ax25_table[] = { {} }; +static struct trans_ctl_table trans_net_ax25_table[] = { + { 0, NULL, trans_net_ax25_param_table }, + {} +}; + static struct trans_ctl_table trans_net_bridge_table[] = { { NET_BRIDGE_NF_CALL_ARPTABLES, "bridge-nf-call-arptables" }, { NET_BRIDGE_NF_CALL_IPTABLES, "bridge-nf-call-iptables" }, diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index aa82d7bf478..5b86698faa0 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -384,45 +384,19 @@ int tick_resume_broadcast_oneshot(struct clock_event_device *bc) } /* - * Reprogram the broadcast device: - * - * Called with tick_broadcast_lock held and interrupts disabled. - */ -static int tick_broadcast_reprogram(void) -{ - ktime_t expires = { .tv64 = KTIME_MAX }; - struct tick_device *td; - int cpu; - - /* - * Find the event which expires next: - */ - for (cpu = first_cpu(tick_broadcast_oneshot_mask); cpu != NR_CPUS; - cpu = next_cpu(cpu, tick_broadcast_oneshot_mask)) { - td = &per_cpu(tick_cpu_device, cpu); - if (td->evtdev->next_event.tv64 < expires.tv64) - expires = td->evtdev->next_event; - } - - if (expires.tv64 == KTIME_MAX) - return 0; - - return tick_broadcast_set_event(expires, 0); -} - -/* * Handle oneshot mode broadcasting */ static void tick_handle_oneshot_broadcast(struct clock_event_device *dev) { struct tick_device *td; cpumask_t mask; - ktime_t now; + ktime_t now, next_event; int cpu; spin_lock(&tick_broadcast_lock); again: dev->next_event.tv64 = KTIME_MAX; + next_event.tv64 = KTIME_MAX; mask = CPU_MASK_NONE; now = ktime_get(); /* Find all expired events */ @@ -431,19 +405,31 @@ again: td = &per_cpu(tick_cpu_device, cpu); if (td->evtdev->next_event.tv64 <= now.tv64) cpu_set(cpu, mask); + else if (td->evtdev->next_event.tv64 < next_event.tv64) + next_event.tv64 = td->evtdev->next_event.tv64; } /* - * Wakeup the cpus which have an expired event. The broadcast - * device is reprogrammed in the return from idle code. + * Wakeup the cpus which have an expired event. + */ + tick_do_broadcast(mask); + + /* + * Two reasons for reprogram: + * + * - The global event did not expire any CPU local + * events. This happens in dyntick mode, as the maximum PIT + * delta is quite small. + * + * - There are pending events on sleeping CPUs which were not + * in the event mask */ - if (!tick_do_broadcast(mask)) { + if (next_event.tv64 != KTIME_MAX) { /* - * The global event did not expire any CPU local - * events. This happens in dyntick mode, as the - * maximum PIT delta is quite small. + * Rearm the broadcast device. If event expired, + * repeat the above */ - if (tick_broadcast_reprogram()) + if (tick_broadcast_set_event(next_event, 0)) goto again; } spin_unlock(&tick_broadcast_lock); diff --git a/kernel/timer.c b/kernel/timer.c index a05817c021d..d4527dcef1a 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1219,11 +1219,11 @@ asmlinkage long sys_sysinfo(struct sysinfo __user *info) */ static struct lock_class_key base_lock_keys[NR_CPUS]; -static int __devinit init_timers_cpu(int cpu) +static int __cpuinit init_timers_cpu(int cpu) { int j; tvec_base_t *base; - static char __devinitdata tvec_base_done[NR_CPUS]; + static char __cpuinitdata tvec_base_done[NR_CPUS]; if (!tvec_base_done[cpu]) { static char boot_done; diff --git a/lib/kobject.c b/lib/kobject.c index b52e9f4ef37..3590f022a60 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -234,13 +234,13 @@ int kobject_register(struct kobject * kobj) /** - * kobject_set_name - Set the name of an object - * @kobj: object. - * @fmt: format string used to build the name + * kobject_set_name - Set the name of a kobject + * @kobj: kobject to name + * @fmt: format string used to build the name * - * If strlen(name) >= KOBJ_NAME_LEN, then use a dynamically allocated - * string that @kobj->k_name points to. Otherwise, use the static - * @kobj->name array. + * This sets the name of the kobject. If you have already added the + * kobject to the system, you must call kobject_rename() in order to + * change the name of the kobject. */ int kobject_set_name(struct kobject * kobj, const char * fmt, ...) { diff --git a/lib/rwsem.c b/lib/rwsem.c index cdb4e3d0560..7d02700a4b0 100644 --- a/lib/rwsem.c +++ b/lib/rwsem.c @@ -146,7 +146,7 @@ __rwsem_do_wake(struct rw_semaphore *sem, int downgrading) /* * wait for a lock to be granted */ -static struct rw_semaphore * +static struct rw_semaphore __sched * rwsem_down_failed_common(struct rw_semaphore *sem, struct rwsem_waiter *waiter, signed long adjustment) { diff --git a/mm/Kconfig b/mm/Kconfig index c070ec0c15b..9ef97417a0b 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -112,18 +112,17 @@ config SPARSEMEM_EXTREME def_bool y depends on SPARSEMEM && !SPARSEMEM_STATIC -# -# SPARSEMEM_VMEMMAP uses a virtually mapped mem_map to optimise pfn_to_page -# and page_to_pfn. The most efficient option where kernel virtual space is -# not under pressure. -# config SPARSEMEM_VMEMMAP_ENABLE def_bool n config SPARSEMEM_VMEMMAP - bool - depends on SPARSEMEM - default y if (SPARSEMEM_VMEMMAP_ENABLE) + bool "Sparse Memory virtual memmap" + depends on SPARSEMEM && SPARSEMEM_VMEMMAP_ENABLE + default y + help + SPARSEMEM_VMEMMAP uses a virtually mapped memmap to optimise + pfn_to_page and page_to_pfn operations. This is the most + efficient option when sufficient kernel resources are available. # eventually, we can have this option just 'select SPARSEMEM' config MEMORY_HOTPLUG diff --git a/mm/filemap.c b/mm/filemap.c index 188cf5fd3e8..f4d0cded0e1 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -124,6 +124,18 @@ void __remove_from_page_cache(struct page *page) mapping->nrpages--; __dec_zone_page_state(page, NR_FILE_PAGES); BUG_ON(page_mapped(page)); + + /* + * Some filesystems seem to re-dirty the page even after + * the VM has canceled the dirty bit (eg ext3 journaling). + * + * Fix it up by doing a final dirty accounting check after + * having removed the page entirely. + */ + if (PageDirty(page) && mapping_cap_account_dirty(mapping)) { + dec_zone_page_state(page, NR_FILE_DIRTY); + dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); + } } void remove_from_page_cache(struct page *page) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 6121b57bbe9..7224a4f0710 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -31,7 +31,7 @@ static unsigned int free_huge_pages_node[MAX_NUMNODES]; static unsigned int surplus_huge_pages_node[MAX_NUMNODES]; static gfp_t htlb_alloc_mask = GFP_HIGHUSER; unsigned long hugepages_treat_as_movable; -int hugetlb_dynamic_pool; +unsigned long nr_overcommit_huge_pages; static int hugetlb_next_nid; /* @@ -227,22 +227,58 @@ static struct page *alloc_buddy_huge_page(struct vm_area_struct *vma, unsigned long address) { struct page *page; + unsigned int nid; - /* Check if the dynamic pool is enabled */ - if (!hugetlb_dynamic_pool) + /* + * Assume we will successfully allocate the surplus page to + * prevent racing processes from causing the surplus to exceed + * overcommit + * + * This however introduces a different race, where a process B + * tries to grow the static hugepage pool while alloc_pages() is + * called by process A. B will only examine the per-node + * counters in determining if surplus huge pages can be + * converted to normal huge pages in adjust_pool_surplus(). A + * won't be able to increment the per-node counter, until the + * lock is dropped by B, but B doesn't drop hugetlb_lock until + * no more huge pages can be converted from surplus to normal + * state (and doesn't try to convert again). Thus, we have a + * case where a surplus huge page exists, the pool is grown, and + * the surplus huge page still exists after, even though it + * should just have been converted to a normal huge page. This + * does not leak memory, though, as the hugepage will be freed + * once it is out of use. It also does not allow the counters to + * go out of whack in adjust_pool_surplus() as we don't modify + * the node values until we've gotten the hugepage and only the + * per-node value is checked there. + */ + spin_lock(&hugetlb_lock); + if (surplus_huge_pages >= nr_overcommit_huge_pages) { + spin_unlock(&hugetlb_lock); return NULL; + } else { + nr_huge_pages++; + surplus_huge_pages++; + } + spin_unlock(&hugetlb_lock); page = alloc_pages(htlb_alloc_mask|__GFP_COMP|__GFP_NOWARN, HUGETLB_PAGE_ORDER); + + spin_lock(&hugetlb_lock); if (page) { + nid = page_to_nid(page); set_compound_page_dtor(page, free_huge_page); - spin_lock(&hugetlb_lock); - nr_huge_pages++; - nr_huge_pages_node[page_to_nid(page)]++; - surplus_huge_pages++; - surplus_huge_pages_node[page_to_nid(page)]++; - spin_unlock(&hugetlb_lock); + /* + * We incremented the global counters already + */ + nr_huge_pages_node[nid]++; + surplus_huge_pages_node[nid]++; + } else { + nr_huge_pages--; + surplus_huge_pages--; } + spin_unlock(&hugetlb_lock); return page; } @@ -481,6 +517,12 @@ static unsigned long set_max_huge_pages(unsigned long count) * Increase the pool size * First take pages out of surplus state. Then make up the * remaining difference by allocating fresh huge pages. + * + * We might race with alloc_buddy_huge_page() here and be unable + * to convert a surplus huge page to a normal huge page. That is + * not critical, though, it just means the overall size of the + * pool might be one hugepage larger than it needs to be, but + * within all the constraints specified by the sysctls. */ spin_lock(&hugetlb_lock); while (surplus_huge_pages && count > persistent_huge_pages) { @@ -509,6 +551,14 @@ static unsigned long set_max_huge_pages(unsigned long count) * to keep enough around to satisfy reservations). Then place * pages into surplus state as needed so the pool will shrink * to the desired size as pages become free. + * + * By placing pages into the surplus state independent of the + * overcommit value, we are allowing the surplus pool size to + * exceed overcommit. There are few sane options here. Since + * alloc_buddy_huge_page() is checking the global counter, + * though, we'll note that we're not allowed to exceed surplus + * and won't grow the pool anywhere else. Not until one of the + * sysctls are changed, or the surplus pages go out of use. */ min_count = resv_huge_pages + nr_huge_pages - free_huge_pages; min_count = max(count, min_count); @@ -907,7 +957,7 @@ int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, */ pte = huge_pte_offset(mm, vaddr & HPAGE_MASK); - if (!pte || pte_none(*pte)) { + if (!pte || pte_none(*pte) || (write && !pte_write(*pte))) { int ret; spin_unlock(&mm->page_table_lock); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index b5a58d476c1..d73bfad1c32 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -847,8 +847,19 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order, struct page *page = __rmqueue(zone, order, migratetype); if (unlikely(page == NULL)) break; + + /* + * Split buddy pages returned by expand() are received here + * in physical page order. The page is added to the callers and + * list and the list head then moves forward. From the callers + * perspective, the linked list is ordered by page number in + * some conditions. This is useful for IO devices that can + * merge IO requests if the physical pages are ordered + * properly. + */ list_add(&page->lru, list); set_page_private(page, migratetype); + list = &page->lru; } spin_unlock(&zone->lock); return i; diff --git a/mm/slub.c b/mm/slub.c index 9c1d9f3b364..b9f37cb0f2e 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1468,9 +1468,6 @@ static void *__slab_alloc(struct kmem_cache *s, void **object; struct page *new; - /* We handle __GFP_ZERO in the caller */ - gfpflags &= ~__GFP_ZERO; - if (!c->page) goto new_slab; diff --git a/mm/sparse.c b/mm/sparse.c index e06f514fe04..a2183cb5d52 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -83,6 +83,8 @@ static int __meminit sparse_index_init(unsigned long section_nr, int nid) return -EEXIST; section = sparse_index_alloc(nid); + if (!section) + return -ENOMEM; /* * This lock keeps two different sections from * reallocating for the same index @@ -389,9 +391,17 @@ int sparse_add_one_section(struct zone *zone, unsigned long start_pfn, * no locking for this, because it does its own * plus, it does a kmalloc */ - sparse_index_init(section_nr, pgdat->node_id); + ret = sparse_index_init(section_nr, pgdat->node_id); + if (ret < 0 && ret != -EEXIST) + return ret; memmap = kmalloc_section_memmap(section_nr, pgdat->node_id, nr_pages); + if (!memmap) + return -ENOMEM; usemap = __kmalloc_section_usemap(); + if (!usemap) { + __kfree_section_memmap(memmap, nr_pages); + return -ENOMEM; + } pgdat_resize_lock(pgdat, &flags); @@ -401,18 +411,16 @@ int sparse_add_one_section(struct zone *zone, unsigned long start_pfn, goto out; } - if (!usemap) { - ret = -ENOMEM; - goto out; - } ms->section_mem_map |= SECTION_MARKED_PRESENT; ret = sparse_init_one_section(ms, section_nr, memmap, usemap); out: pgdat_resize_unlock(pgdat, &flags); - if (ret <= 0) + if (ret <= 0) { + kfree(usemap); __kfree_section_memmap(memmap, nr_pages); + } return ret; } #endif diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 5b183156307..4add9bd4bc8 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -124,8 +124,8 @@ static void __exit vlan_cleanup_module(void) { int i; - vlan_netlink_fini(); vlan_ioctl_set(NULL); + vlan_netlink_fini(); /* Un-register us from receiving netdevice events */ unregister_netdevice_notifier(&vlan_notifier_block); diff --git a/net/ax25/ax25_subr.c b/net/ax25/ax25_subr.c index 5fe9b2a6697..d8f21573317 100644 --- a/net/ax25/ax25_subr.c +++ b/net/ax25/ax25_subr.c @@ -279,6 +279,7 @@ void ax25_disconnect(ax25_cb *ax25, int reason) ax25_link_failed(ax25, reason); if (ax25->sk != NULL) { + local_bh_disable(); bh_lock_sock(ax25->sk); ax25->sk->sk_state = TCP_CLOSE; ax25->sk->sk_err = reason; @@ -288,5 +289,6 @@ void ax25_disconnect(ax25_cb *ax25, int reason) sock_set_flag(ax25->sk, SOCK_DEAD); } bh_unlock_sock(ax25->sk); + local_bh_enable(); } } diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index c07bac5e3e1..bf7787395fe 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -157,8 +157,7 @@ static struct ethtool_ops br_ethtool_ops = { void br_dev_setup(struct net_device *dev) { - memset(dev->dev_addr, 0, ETH_ALEN); - + random_ether_addr(dev->dev_addr); ether_setup(dev); dev->do_ioctl = br_dev_ioctl; diff --git a/net/core/dev.c b/net/core/dev.c index 86d62611f2f..26a3a3a15be 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3972,8 +3972,7 @@ void synchronize_net(void) * @dev: device * * This function shuts down a device interface and removes it - * from the kernel tables. On success 0 is returned, on a failure - * a negative errno code is returned. + * from the kernel tables. * * Callers must hold the rtnl semaphore. You may want * unregister_netdev() instead of this. @@ -3991,8 +3990,7 @@ void unregister_netdevice(struct net_device *dev) * @dev: device * * This function shuts down a device interface and removes it - * from the kernel tables. On success 0 is returned, on a failure - * a negative errno code is returned. + * from the kernel tables. * * This is just a wrapper for unregister_netdevice that takes * the rtnl semaphore. In general you want to use this and not diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 55d199e4ae2..3168c3de491 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -516,8 +516,6 @@ static struct in_ifaddr *rtm_to_ifaddr(struct nlmsghdr *nlh) goto errout; } - ipv4_devconf_setall(in_dev); - ifa = inet_alloc_ifa(); if (ifa == NULL) { /* @@ -528,6 +526,7 @@ static struct in_ifaddr *rtm_to_ifaddr(struct nlmsghdr *nlh) goto errout; } + ipv4_devconf_setall(in_dev); in_dev_hold(in_dev); if (tb[IFA_ADDRESS] == NULL) diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index c31bccb9b52..1738113268b 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -9,6 +9,7 @@ #include <linux/pfkeyv2.h> #include <linux/random.h> #include <linux/spinlock.h> +#include <linux/in6.h> #include <net/icmp.h> #include <net/protocol.h> #include <net/udp.h> @@ -224,6 +225,10 @@ static int esp_input(struct xfrm_state *x, struct sk_buff *skb) /* ... check padding bits here. Silly. :-) */ + /* RFC4303: Drop dummy packets without any error */ + if (nexthdr[1] == IPPROTO_NONE) + goto out; + iph = ip_hdr(skb); ihl = iph->ihl * 4; diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index c5c107a0182..96400b0bd08 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -1396,25 +1396,7 @@ late_initcall(ip_auto_config); /* * Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel - * command line parameter. It consists of option fields separated by colons in - * the following order: - * - * <client-ip>:<server-ip>:<gw-ip>:<netmask>:<host name>:<device>:<PROTO> - * - * Any of the fields can be empty which means to use a default value: - * <client-ip> - address given by BOOTP or RARP - * <server-ip> - address of host returning BOOTP or RARP packet - * <gw-ip> - none, or the address returned by BOOTP - * <netmask> - automatically determined from <client-ip>, or the - * one returned by BOOTP - * <host name> - <client-ip> in ASCII notation, or the name returned - * by BOOTP - * <device> - use all available devices - * <PROTO>: - * off|none - don't do autoconfig at all (DEFAULT) - * on|any - use any configured protocol - * dhcp|bootp|rarp - use only the specified protocol - * both - use both BOOTP and RARP (not DHCP) + * command line parameter. See Documentation/nfsroot.txt. */ static int __init ic_proto_name(char *name) { diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index 4b10b98640a..b9b189c2620 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -1492,8 +1492,10 @@ static inline int compat_copy_match_to_user(struct ipt_entry_match *m, return xt_compat_match_to_user(m, dstptr, size); } -static int compat_copy_entry_to_user(struct ipt_entry *e, - void __user **dstptr, compat_uint_t *size) +static int +compat_copy_entry_to_user(struct ipt_entry *e, void __user **dstptr, + compat_uint_t *size, struct xt_counters *counters, + unsigned int *i) { struct ipt_entry_target *t; struct compat_ipt_entry __user *ce; @@ -1507,6 +1509,9 @@ static int compat_copy_entry_to_user(struct ipt_entry *e, if (copy_to_user(ce, e, sizeof(struct ipt_entry))) goto out; + if (copy_to_user(&ce->counters, &counters[*i], sizeof(counters[*i]))) + goto out; + *dstptr += sizeof(struct compat_ipt_entry); ret = IPT_MATCH_ITERATE(e, compat_copy_match_to_user, dstptr, size); target_offset = e->target_offset - (origsize - *size); @@ -1522,6 +1527,8 @@ static int compat_copy_entry_to_user(struct ipt_entry *e, goto out; if (put_user(next_offset, &ce->next_offset)) goto out; + + (*i)++; return 0; out: return ret; @@ -1937,14 +1944,13 @@ struct compat_ipt_get_entries static int compat_copy_entries_to_user(unsigned int total_size, struct xt_table *table, void __user *userptr) { - unsigned int off, num; - struct compat_ipt_entry e; struct xt_counters *counters; struct xt_table_info *private = table->private; void __user *pos; unsigned int size; int ret = 0; void *loc_cpu_entry; + unsigned int i = 0; counters = alloc_counters(table); if (IS_ERR(counters)) @@ -1958,48 +1964,9 @@ static int compat_copy_entries_to_user(unsigned int total_size, pos = userptr; size = total_size; ret = IPT_ENTRY_ITERATE(loc_cpu_entry, total_size, - compat_copy_entry_to_user, &pos, &size); - if (ret) - goto free_counters; - - /* ... then go back and fix counters and names */ - for (off = 0, num = 0; off < size; off += e.next_offset, num++) { - unsigned int i; - struct ipt_entry_match m; - struct ipt_entry_target t; + compat_copy_entry_to_user, + &pos, &size, counters, &i); - ret = -EFAULT; - if (copy_from_user(&e, userptr + off, - sizeof(struct compat_ipt_entry))) - goto free_counters; - if (copy_to_user(userptr + off + - offsetof(struct compat_ipt_entry, counters), - &counters[num], sizeof(counters[num]))) - goto free_counters; - - for (i = sizeof(struct compat_ipt_entry); - i < e.target_offset; i += m.u.match_size) { - if (copy_from_user(&m, userptr + off + i, - sizeof(struct ipt_entry_match))) - goto free_counters; - if (copy_to_user(userptr + off + i + - offsetof(struct ipt_entry_match, u.user.name), - m.u.kernel.match->name, - strlen(m.u.kernel.match->name) + 1)) - goto free_counters; - } - - if (copy_from_user(&t, userptr + off + e.target_offset, - sizeof(struct ipt_entry_target))) - goto free_counters; - if (copy_to_user(userptr + off + e.target_offset + - offsetof(struct ipt_entry_target, u.user.name), - t.u.kernel.target->name, - strlen(t.u.kernel.target->name) + 1)) - goto free_counters; - } - ret = 0; -free_counters: vfree(counters); return ret; } diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index b9e429d2d1d..889c89362bf 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -923,7 +923,7 @@ static void tcp_init_metrics(struct sock *sk) } if (dst_metric(dst, RTAX_RTTVAR) > tp->mdev) { tp->mdev = dst_metric(dst, RTAX_RTTVAR); - tp->mdev_max = tp->rttvar = max(tp->mdev, TCP_RTO_MIN); + tp->mdev_max = tp->rttvar = max(tp->mdev, tcp_rto_min(sk)); } tcp_set_rto(sk); tcp_bound_rto(sk); diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index 7db66f10e00..44405325467 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -230,6 +230,12 @@ static int esp6_input(struct xfrm_state *x, struct sk_buff *skb) } /* ... check padding bits here. Silly. :-) */ + /* RFC4303: Drop dummy packets without any error */ + if (nexthdr[1] == IPPROTO_NONE) { + ret = -EINVAL; + goto out; + } + pskb_trim(skb, skb->len - alen - padlen - 2); ret = nexthdr[1]; } diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 1334fc174bc..8c5f80fd03a 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -1046,7 +1046,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, break; default: - return -EINVAL; + return -ENOPROTOOPT; } len = min_t(unsigned int, sizeof(int), len); if(put_user(len, optlen)) @@ -1069,9 +1069,8 @@ int ipv6_getsockopt(struct sock *sk, int level, int optname, err = do_ipv6_getsockopt(sk, level, optname, optval, optlen); #ifdef CONFIG_NETFILTER - /* we need to exclude all possible EINVALs except default case */ - if (err == -EINVAL && optname != IPV6_ADDRFORM && - optname != MCAST_MSFILTER) { + /* we need to exclude all possible ENOPROTOOPTs except default case */ + if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) { int len; if (get_user(len, optlen)) @@ -1108,9 +1107,8 @@ int compat_ipv6_getsockopt(struct sock *sk, int level, int optname, err = do_ipv6_getsockopt(sk, level, optname, optval, optlen); #ifdef CONFIG_NETFILTER - /* we need to exclude all possible EINVALs except default case */ - if (err == -EINVAL && optname != IPV6_ADDRFORM && - optname != MCAST_MSFILTER) { + /* we need to exclude all possible ENOPROTOOPTs except default case */ + if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) { int len; if (get_user(len, optlen)) diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index 82e27b80d07..b8e9eb445d7 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -233,7 +233,7 @@ __xfrm6_bundle_create(struct xfrm_policy *policy, struct xfrm_state **xfrm, int dst_prev->output = dst_prev->xfrm->outer_mode->afinfo->output; /* Sheit... I remember I did this right. Apparently, * it was magically lost, so this code needs audit */ - x->u.rt6.rt6i_flags = rt0->rt6i_flags&(RTCF_BROADCAST|RTCF_MULTICAST|RTCF_LOCAL); + x->u.rt6.rt6i_flags = rt0->rt6i_flags&(RTF_ANYCAST|RTF_LOCAL); x->u.rt6.rt6i_metric = rt0->rt6i_metric; x->u.rt6.rt6i_node = rt0->rt6i_node; x->u.rt6.rt6i_gateway = rt0->rt6i_gateway; diff --git a/net/irda/irlmp.c b/net/irda/irlmp.c index cedff8068fb..f24cb755908 100644 --- a/net/irda/irlmp.c +++ b/net/irda/irlmp.c @@ -353,6 +353,7 @@ void irlmp_unregister_link(__u32 saddr) /* Final cleanup */ del_timer(&link->idle_timer); link->magic = 0; + hashbin_delete(link->lsaps, (FREE_FUNC) __irlmp_close_lsap); kfree(link); } } diff --git a/net/irda/parameters.c b/net/irda/parameters.c index 2627dad7cd8..7183e9ef799 100644 --- a/net/irda/parameters.c +++ b/net/irda/parameters.c @@ -463,7 +463,7 @@ int irda_param_insert(void *self, __u8 pi, __u8 *buf, int len, int n = 0; IRDA_ASSERT(buf != NULL, return ret;); - IRDA_ASSERT(info != 0, return ret;); + IRDA_ASSERT(info != NULL, return ret;); pi_minor = pi & info->pi_mask; pi_major = pi >> info->pi_major_offset; @@ -517,7 +517,7 @@ static int irda_param_extract(void *self, __u8 *buf, int len, int n = 0; IRDA_ASSERT(buf != NULL, return ret;); - IRDA_ASSERT(info != 0, return ret;); + IRDA_ASSERT(info != NULL, return ret;); pi_minor = buf[n] & info->pi_mask; pi_major = buf[n] >> info->pi_major_offset; @@ -570,7 +570,7 @@ int irda_param_extract_all(void *self, __u8 *buf, int len, int n = 0; IRDA_ASSERT(buf != NULL, return ret;); - IRDA_ASSERT(info != 0, return ret;); + IRDA_ASSERT(info != NULL, return ret;); /* * Parse all parameters. Each parameter must be at least two bytes diff --git a/net/mac80211/ieee80211_rate.c b/net/mac80211/ieee80211_rate.c index 7254bd60983..3260a4a0ecc 100644 --- a/net/mac80211/ieee80211_rate.c +++ b/net/mac80211/ieee80211_rate.c @@ -33,6 +33,7 @@ int ieee80211_rate_control_register(struct rate_control_ops *ops) if (!strcmp(alg->ops->name, ops->name)) { /* don't register an algorithm twice */ WARN_ON(1); + mutex_unlock(&rate_ctrl_mutex); return -EALREADY; } } diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 9be1826e6cd..7d231243754 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1024,8 +1024,10 @@ ctnetlink_create_conntrack(struct nlattr *cda[], } /* setup master conntrack: this is a confirmed expectation */ - if (master_ct) + if (master_ct) { + __set_bit(IPS_EXPECTED_BIT, &ct->status); ct->master = master_ct; + } add_timer(&ct->timeout); nf_conntrack_hash_insert(ct); diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c index d9a3bded0d0..b6160e41eb1 100644 --- a/net/netfilter/x_tables.c +++ b/net/netfilter/x_tables.c @@ -377,7 +377,9 @@ int xt_compat_match_to_user(struct xt_entry_match *m, void __user **dstptr, u_int16_t msize = m->u.user.match_size - off; if (copy_to_user(cm, m, sizeof(*cm)) || - put_user(msize, &cm->u.user.match_size)) + put_user(msize, &cm->u.user.match_size) || + copy_to_user(cm->u.user.name, m->u.kernel.match->name, + strlen(m->u.kernel.match->name) + 1)) return -EFAULT; if (match->compat_to_user) { @@ -468,7 +470,9 @@ int xt_compat_target_to_user(struct xt_entry_target *t, void __user **dstptr, u_int16_t tsize = t->u.user.target_size - off; if (copy_to_user(ct, t, sizeof(*ct)) || - put_user(tsize, &ct->u.user.target_size)) + put_user(tsize, &ct->u.user.target_size) || + copy_to_user(ct->u.user.name, t->u.kernel.target->name, + strlen(t->u.kernel.target->name) + 1)) return -EFAULT; if (target->compat_to_user) { diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index 19103678bf2..2ef44d8560c 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -240,7 +240,7 @@ static bool select_all(const struct xt_hashlimit_htable *ht, static bool select_gc(const struct xt_hashlimit_htable *ht, const struct dsthash_ent *he) { - return jiffies >= he->expires; + return time_after_eq(jiffies, he->expires); } static void htable_selective_cleanup(struct xt_hashlimit_htable *ht, diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c index 4908041ffb3..1733fa29a50 100644 --- a/net/sctp/ulpqueue.c +++ b/net/sctp/ulpqueue.c @@ -53,6 +53,7 @@ static struct sctp_ulpevent * sctp_ulpq_reasm(struct sctp_ulpq *ulpq, struct sctp_ulpevent *); static struct sctp_ulpevent * sctp_ulpq_order(struct sctp_ulpq *, struct sctp_ulpevent *); +static void sctp_ulpq_reasm_drain(struct sctp_ulpq *ulpq); /* 1st Level Abstractions */ @@ -190,6 +191,7 @@ static void sctp_ulpq_set_pd(struct sctp_ulpq *ulpq) static int sctp_ulpq_clear_pd(struct sctp_ulpq *ulpq) { ulpq->pd_mode = 0; + sctp_ulpq_reasm_drain(ulpq); return sctp_clear_pd(ulpq->asoc->base.sk, ulpq->asoc); } @@ -699,6 +701,37 @@ void sctp_ulpq_reasm_flushtsn(struct sctp_ulpq *ulpq, __u32 fwd_tsn) } } +/* + * Drain the reassembly queue. If we just cleared parted delivery, it + * is possible that the reassembly queue will contain already reassembled + * messages. Retrieve any such messages and give them to the user. + */ +static void sctp_ulpq_reasm_drain(struct sctp_ulpq *ulpq) +{ + struct sctp_ulpevent *event = NULL; + struct sk_buff_head temp; + + if (skb_queue_empty(&ulpq->reasm)) + return; + + while ((event = sctp_ulpq_retrieve_reassembled(ulpq)) != NULL) { + /* Do ordering if needed. */ + if ((event) && (event->msg_flags & MSG_EOR)){ + skb_queue_head_init(&temp); + __skb_queue_tail(&temp, sctp_event2skb(event)); + + event = sctp_ulpq_order(ulpq, event); + } + + /* Send event to the ULP. 'event' is the + * sctp_ulpevent for very first SKB on the temp' list. + */ + if (event) + sctp_ulpq_tail_event(ulpq, event); + } +} + + /* Helper function to gather skbs that have possibly become * ordered by an an incoming chunk. */ diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c index 9e11ce71595..ee8de7af2a5 100644 --- a/net/sunrpc/xprtrdma/rpc_rdma.c +++ b/net/sunrpc/xprtrdma/rpc_rdma.c @@ -92,7 +92,6 @@ rpcrdma_convert_iovs(struct xdr_buf *xdrbuf, int pos, seg[n].mr_page = NULL; seg[n].mr_offset = xdrbuf->head[0].iov_base; seg[n].mr_len = xdrbuf->head[0].iov_len; - pos += xdrbuf->head[0].iov_len; ++n; } @@ -104,7 +103,6 @@ rpcrdma_convert_iovs(struct xdr_buf *xdrbuf, int pos, seg[n].mr_len = min_t(u32, PAGE_SIZE - xdrbuf->page_base, xdrbuf->page_len); len = xdrbuf->page_len - seg[n].mr_len; - pos += len; ++n; p = 1; while (len > 0) { @@ -119,20 +117,15 @@ rpcrdma_convert_iovs(struct xdr_buf *xdrbuf, int pos, } } - if (pos < xdrbuf->len && xdrbuf->tail[0].iov_len) { + if (xdrbuf->tail[0].iov_len) { if (n == nsegs) return 0; seg[n].mr_page = NULL; seg[n].mr_offset = xdrbuf->tail[0].iov_base; seg[n].mr_len = xdrbuf->tail[0].iov_len; - pos += xdrbuf->tail[0].iov_len; ++n; } - if (pos < xdrbuf->len) - dprintk("RPC: %s: marshaled only %d of %d\n", - __func__, pos, xdrbuf->len); - return n; } diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 6b792265dc0..24ddfd2ca38 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -253,7 +253,7 @@ static int release(struct socket *sock) dbg("sock_delete: %x\n",tsock); if (!tsock) return 0; - down_interruptible(&tsock->sem); + down(&tsock->sem); if (!sock->sk) { up(&tsock->sem); return 0; diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 9a4cf2e45a1..b91b16671c1 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1318,8 +1318,9 @@ restart: if (sk && sk->sk_policy[XFRM_POLICY_OUT]) { policy = xfrm_sk_policy_lookup(sk, XFRM_POLICY_OUT, fl); + err = PTR_ERR(policy); if (IS_ERR(policy)) - return PTR_ERR(policy); + goto dropdst; } if (!policy) { @@ -1330,8 +1331,9 @@ restart: policy = flow_cache_lookup(fl, dst_orig->ops->family, dir, xfrm_policy_lookup); + err = PTR_ERR(policy); if (IS_ERR(policy)) - return PTR_ERR(policy); + goto dropdst; } if (!policy) @@ -1501,8 +1503,9 @@ restart: return 0; error: - dst_release(dst_orig); xfrm_pols_put(pols, npols); +dropdst: + dst_release(dst_orig); *dst_p = NULL; return err; } diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index cf43c49eab3..1af522bf12c 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -2028,6 +2028,7 @@ void xfrm_audit_state_add(struct xfrm_state *x, int result, u32 auid, u32 sid) { struct audit_buffer *audit_buf; + u32 spi; extern int audit_enabled; if (audit_enabled == 0) @@ -2037,8 +2038,8 @@ xfrm_audit_state_add(struct xfrm_state *x, int result, u32 auid, u32 sid) return; audit_log_format(audit_buf, " op=SAD-add res=%u",result); xfrm_audit_common_stateinfo(x, audit_buf); - audit_log_format(audit_buf, " spi=%lu(0x%lx)", - (unsigned long)x->id.spi, (unsigned long)x->id.spi); + spi = ntohl(x->id.spi); + audit_log_format(audit_buf, " spi=%u(0x%x)", spi, spi); audit_log_end(audit_buf); } EXPORT_SYMBOL_GPL(xfrm_audit_state_add); @@ -2047,6 +2048,7 @@ void xfrm_audit_state_delete(struct xfrm_state *x, int result, u32 auid, u32 sid) { struct audit_buffer *audit_buf; + u32 spi; extern int audit_enabled; if (audit_enabled == 0) @@ -2056,8 +2058,8 @@ xfrm_audit_state_delete(struct xfrm_state *x, int result, u32 auid, u32 sid) return; audit_log_format(audit_buf, " op=SAD-delete res=%u",result); xfrm_audit_common_stateinfo(x, audit_buf); - audit_log_format(audit_buf, " spi=%lu(0x%lx)", - (unsigned long)x->id.spi, (unsigned long)x->id.spi); + spi = ntohl(x->id.spi); + audit_log_format(audit_buf, " spi=%u(0x%x)", spi, spi); audit_log_end(audit_buf); } EXPORT_SYMBOL_GPL(xfrm_audit_state_delete); diff --git a/scripts/bloat-o-meter b/scripts/bloat-o-meter index ce59fc2d8de..6501a50e17f 100755 --- a/scripts/bloat-o-meter +++ b/scripts/bloat-o-meter @@ -18,7 +18,8 @@ def getsizes(file): for l in os.popen("nm --size-sort " + file).readlines(): size, type, name = l[:-1].split() if type in "tTdDbB": - if "." in name: name = "static." + name.split(".")[0] + # function names begin with '.' on 64-bit powerpc + if "." in name[1:]: name = "static." + name.split(".")[0] sym[name] = sym.get(name, 0) + int(size, 16) return sym diff --git a/scripts/mkmakefile b/scripts/mkmakefile index 9ad1bd79325..e0f54b9d8fe 100644 --- a/scripts/mkmakefile +++ b/scripts/mkmakefile @@ -13,7 +13,7 @@ test ! -r $2/Makefile -o -O $2/Makefile || exit 0 # Only overwrite automatically generated Makefiles # (so we do not overwrite kernel Makefile) -if ! grep -q Automatically $2/Makefile +if test -e $2/Makefile && ! grep -q Automatically $2/Makefile then exit 0 fi diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 7bc2767e158..55c6c822bec 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -113,9 +113,9 @@ static void pxa2xx_ac97_reset(struct snd_ac97 *ac97) gsr_bits = 0; #ifdef CONFIG_PXA27x /* PXA27x Developers Manual section 13.5.2.2.1 */ - pxa_set_cken(1 << 31, 1); + pxa_set_cken(CKEN_AC97CONF, 1); udelay(5); - pxa_set_cken(1 << 31, 0); + pxa_set_cken(CKEN_AC97CONF, 0); GCR = GCR_COLD_RST; udelay(50); #else diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index dd14abcdf1b..60e6f4677f9 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -160,9 +160,9 @@ static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) gsr_bits = 0; #ifdef CONFIG_PXA27x /* PXA27x Developers Manual section 13.5.2.2.1 */ - pxa_set_cken(31, 1); + pxa_set_cken(CKEN_AC97CONF, 1); udelay(5); - pxa_set_cken(31, 0); + pxa_set_cken(CKEN_AC97CONF, 0); GCR = GCR_COLD_RST; udelay(50); #else |