diff options
76 files changed, 2190 insertions, 908 deletions
diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt index d53b857a371..841c353297e 100644 --- a/Documentation/input/joystick.txt +++ b/Documentation/input/joystick.txt @@ -39,7 +39,6 @@ them. Bug reports and success stories are also welcome. The input project website is at: - http://www.suse.cz/development/input/ http://atrey.karlin.mff.cuni.cz/~vojtech/input/ There is also a mailing list for the driver at: diff --git a/MAINTAINERS b/MAINTAINERS index 21116cc3b4a..3bab239e82f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -889,6 +889,12 @@ M: rdunlap@xenotime.net T: git http://tali.admingilde.org/git/linux-docbook.git S: Maintained +DOCKING STATION DRIVER +P: Kristen Carlson Accardi +M: kristen.c.accardi@intel.com +L: linux-acpi@vger.kernel.org +S: Maintained + DOUBLETALK DRIVER P: James R. Van Zandt M: jrv@vanzandt.mv.com diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 5b7c26395b4..028bdc9228f 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -179,17 +179,19 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr, static inline struct safe_buffer * find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr) { - struct safe_buffer *b = NULL; + struct safe_buffer *b, *rb = NULL; unsigned long flags; read_lock_irqsave(&device_info->lock, flags); list_for_each_entry(b, &device_info->safe_buffers, node) - if (b->safe_dma_addr == safe_dma_addr) + if (b->safe_dma_addr == safe_dma_addr) { + rb = b; break; + } read_unlock_irqrestore(&device_info->lock, flags); - return b; + return rb; } static inline void diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 7ea5f01dfc7..de4e3313790 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -634,6 +634,14 @@ ENTRY(__switch_to) * purpose. */ + .macro usr_ret, reg +#ifdef CONFIG_ARM_THUMB + bx \reg +#else + mov pc, \reg +#endif + .endm + .align 5 .globl __kuser_helper_start __kuser_helper_start: @@ -675,7 +683,7 @@ __kuser_memory_barrier: @ 0xffff0fa0 #if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP) mcr p15, 0, r0, c7, c10, 5 @ dmb #endif - mov pc, lr + usr_ret lr .align 5 @@ -778,7 +786,7 @@ __kuser_cmpxchg: @ 0xffff0fc0 mov r0, #-1 adds r0, r0, #0 #endif - mov pc, lr + usr_ret lr #else @@ -792,7 +800,7 @@ __kuser_cmpxchg: @ 0xffff0fc0 #ifdef CONFIG_SMP mcr p15, 0, r0, c7, c10, 5 @ dmb #endif - mov pc, lr + usr_ret lr #endif @@ -834,16 +842,11 @@ __kuser_cmpxchg: @ 0xffff0fc0 __kuser_get_tls: @ 0xffff0fe0 #if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL) - ldr r0, [pc, #(16 - 8)] @ TLS stored at 0xffff0ff0 - mov pc, lr - #else - mrc p15, 0, r0, c13, c0, 3 @ read TLS register - mov pc, lr - #endif + usr_ret lr .rep 5 .word 0 @ pad up to __kuser_helper_version diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 4fe386eea4b..5365d4e5949 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -118,7 +118,7 @@ ENTRY(secondary_startup) sub r4, r4, r5 @ mmu has been enabled ldr r4, [r7, r4] @ get secondary_data.pgdir adr lr, __enable_mmu @ return address - add pc, r10, #12 @ initialise processor + add pc, r10, #PROCINFO_INITFUNC @ initialise processor @ (return control reg) /* diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 0c7938645df..273e05f2b8d 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -10,45 +10,47 @@ obj-m := obj-n := obj- := +# DMA +obj-$(CONFIG_S3C2410_DMA) += dma.o + # S3C2400 support files -obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o +obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o # S3C2410 support files -obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o -obj-$(CONFIG_S3C2410_DMA) += dma.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o # Power Management support -obj-$(CONFIG_PM) += pm.o sleep.o -obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o +obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2412 support -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o # # S3C244X support -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o # Clock control -obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o +obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o # S3C2440 support -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o -obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o +obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o # S3C2442 support -obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o +obj-$(CONFIG_CPU_S3C2442) += s3c2442.o +obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o # bast extras diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 094cc52745c..25855452fe8 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -112,7 +112,7 @@ dmadbg_capture(s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs) } static void -dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan, +dmadbg_dumpregs(const char *fname, int line, s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs) { printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n", @@ -132,7 +132,16 @@ dmadbg_showchan(const char *fname, int line, s3c2410_dma_chan_t *chan) chan->number, fname, line, chan->load_state, chan->curr, chan->next, chan->end); - dmadbg_showregs(fname, line, chan, &state); + dmadbg_dumpregs(fname, line, chan, &state); +} + +static void +dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan) +{ + struct s3c2410_dma_regstate state; + + dmadbg_capture(chan, &state); + dmadbg_dumpregs(fname, line, chan, &state); } #define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan)) @@ -253,10 +262,14 @@ s3c2410_dma_loadbuffer(s3c2410_dma_chan_t *chan, buf->next); reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0; } else { - pr_debug("load_state is %d => autoreload\n", chan->load_state); + //pr_debug("load_state is %d => autoreload\n", chan->load_state); reload = S3C2410_DCON_AUTORELOAD; } + if ((buf->data & 0xf0000000) != 0x30000000) { + dmawarn("dmaload: buffer is %p\n", (void *)buf->data); + } + writel(buf->data, chan->addr_reg); dma_wrreg(chan, S3C2410_DMA_DCON, @@ -370,7 +383,7 @@ static int s3c2410_dma_start(s3c2410_dma_chan_t *chan) tmp |= S3C2410_DMASKTRIG_ON; dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); - pr_debug("wrote %08lx to DMASKTRIG\n", tmp); + pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp); #if 0 /* the dma buffer loads should take care of clearing the AUTO @@ -384,7 +397,30 @@ static int s3c2410_dma_start(s3c2410_dma_chan_t *chan) dbg_showchan(chan); + /* if we've only loaded one buffer onto the channel, then chec + * to see if we have another, and if so, try and load it so when + * the first buffer is finished, the new one will be loaded onto + * the channel */ + + if (chan->next != NULL) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + pr_debug("%s: buff not yet loaded, no more todo\n", + __FUNCTION__); + } else { + chan->load_state = S3C2410_DMALOAD_1RUNNING; + s3c2410_dma_loadbuffer(chan, chan->next); + } + + } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } + + local_irq_restore(flags); + return 0; } @@ -436,12 +472,11 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); if (buf == NULL) { pr_debug("%s: out of memory (%ld alloc)\n", - __FUNCTION__, sizeof(*buf)); + __FUNCTION__, (long)sizeof(*buf)); return -ENOMEM; } - pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); - + //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); //dbg_showchan(chan); buf->next = NULL; @@ -537,14 +572,20 @@ s3c2410_dma_lastxfer(s3c2410_dma_chan_t *chan) case S3C2410_DMALOAD_1LOADED: if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load\n", - chan->number); + printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", + chan->number, __FUNCTION__); return; } break; + case S3C2410_DMALOAD_1LOADED_1RUNNING: + /* I belive in this case we do not have anything to do + * until the next buffer comes along, and we turn off the + * reload */ + return; + default: - pr_debug("dma%d: lastxfer: unhandled load_state %d with no next", + pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n", chan->number, chan->load_state); return; @@ -629,7 +670,14 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) } else { } - if (chan->next != NULL) { + /* only reload if the channel is still running... our buffer done + * routine may have altered the state by requesting the dma channel + * to stop or shutdown... */ + + /* todo: check that when the channel is shut-down from inside this + * function, we cope with unsetting reload, etc */ + + if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) { unsigned long flags; switch (chan->load_state) { @@ -644,8 +692,8 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) case S3C2410_DMALOAD_1LOADED: if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load\n", - chan->number); + printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", + chan->number, __FUNCTION__); return IRQ_HANDLED; } @@ -678,8 +726,6 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) return IRQ_HANDLED; } - - /* s3c2410_request_dma * * get control of an dma channel @@ -718,11 +764,17 @@ int s3c2410_dma_request(unsigned int channel, s3c2410_dma_client_t *client, pr_debug("dma%d: %s : requesting irq %d\n", channel, __FUNCTION__, chan->irq); + chan->irq_claimed = 1; + local_irq_restore(flags); + err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, client->name, (void *)chan); + local_irq_save(flags); + if (err) { chan->in_use = 0; + chan->irq_claimed = 0; local_irq_restore(flags); printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", @@ -730,7 +782,6 @@ int s3c2410_dma_request(unsigned int channel, s3c2410_dma_client_t *client, return err; } - chan->irq_claimed = 1; chan->irq_enabled = 1; } @@ -810,6 +861,7 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan) tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); tmp |= S3C2410_DMASKTRIG_STOP; + //tmp &= ~S3C2410_DMASKTRIG_ON; dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); #if 0 @@ -819,6 +871,7 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan) dma_wrreg(chan, S3C2410_DMA_DCON, tmp); #endif + /* should stop do this, or should we wait for flush? */ chan->state = S3C2410_DMA_IDLE; chan->load_state = S3C2410_DMALOAD_NONE; @@ -827,6 +880,22 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan) return 0; } +void s3c2410_dma_waitforstop(s3c2410_dma_chan_t *chan) +{ + unsigned long tmp; + unsigned int timeout = 0x10000; + + while (timeout-- > 0) { + tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); + + if (!(tmp & S3C2410_DMASKTRIG_ON)) + return; + } + + pr_debug("dma%d: failed to stop?\n", chan->number); +} + + /* s3c2410_dma_flush * * stop the channel, and remove all current and pending transfers @@ -837,7 +906,9 @@ static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan) s3c2410_dma_buf_t *buf, *next; unsigned long flags; - pr_debug("%s:\n", __FUNCTION__); + pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number); + + dbg_showchan(chan); local_irq_save(flags); @@ -864,11 +935,64 @@ static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan) } } + dbg_showregs(chan); + + s3c2410_dma_waitforstop(chan); + +#if 0 + /* should also clear interrupts, according to WinCE BSP */ + { + unsigned long tmp; + + tmp = dma_rdreg(chan, S3C2410_DMA_DCON); + tmp |= S3C2410_DCON_NORELOAD; + dma_wrreg(chan, S3C2410_DMA_DCON, tmp); + } +#endif + + dbg_showregs(chan); + local_irq_restore(flags); return 0; } +int +s3c2410_dma_started(s3c2410_dma_chan_t *chan) +{ + unsigned long flags; + + local_irq_save(flags); + + dbg_showchan(chan); + + /* if we've only loaded one buffer onto the channel, then chec + * to see if we have another, and if so, try and load it so when + * the first buffer is finished, the new one will be loaded onto + * the channel */ + + if (chan->next != NULL) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + pr_debug("%s: buff not yet loaded, no more todo\n", + __FUNCTION__); + } else { + chan->load_state = S3C2410_DMALOAD_1RUNNING; + s3c2410_dma_loadbuffer(chan, chan->next); + } + + } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } + + + local_irq_restore(flags); + + return 0; + +} int s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op) @@ -885,14 +1009,15 @@ s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op) return s3c2410_dma_dostop(chan); case S3C2410_DMAOP_PAUSE: - return -ENOENT; - case S3C2410_DMAOP_RESUME: return -ENOENT; case S3C2410_DMAOP_FLUSH: return s3c2410_dma_flush(chan); + case S3C2410_DMAOP_STARTED: + return s3c2410_dma_started(chan); + case S3C2410_DMAOP_TIMEOUT: return 0; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index c4e3f8c6847..f2bbef07b1e 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -285,7 +285,7 @@ static struct flash_platform_data versatile_flash_data = { static struct resource versatile_flash_resource = { .start = VERSATILE_FLASH_BASE, - .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE, + .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1, .flags = IORESOURCE_MEM, }; diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 0db6387025c..ee003bc0e8b 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -59,7 +59,7 @@ static inline int gsi_irq_sharing(int gsi) { return gsi; } #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ - ((acpi_table_entry_header *)entry)->length != sizeof(*entry)) + ((acpi_table_entry_header *)entry)->length < sizeof(*entry)) #define PREFIX "ACPI: " diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S index 9f408eee4e6..b781b38131c 100644 --- a/arch/i386/kernel/acpi/wakeup.S +++ b/arch/i386/kernel/acpi/wakeup.S @@ -292,7 +292,10 @@ ENTRY(do_suspend_lowlevel) pushl $3 call acpi_enter_sleep_state addl $4, %esp - ret + +# In case of S3 failure, we'll emerge here. Jump +# to ret_point to recover + jmp ret_point .p2align 4,,7 ret_point: call restore_registers diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 99761b81db4..0176556aeec 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -55,7 +55,7 @@ #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ - ((acpi_table_entry_header *)entry)->length != sizeof(*entry)) + ((acpi_table_entry_header *)entry)->length < sizeof(*entry)) #define PREFIX "ACPI: " diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts new file mode 100644 index 00000000000..5f41c1f7a5f --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -0,0 +1,257 @@ +/* + * MPC8540 ADS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8540ADS"; + compatible = "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8540@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8540@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 E0 0C 00 73 00 ]; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 E0 0C 00 73 01 ]; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "FEC"; + compatible = "gianfar"; + reg = <26000 1000>; + address = [ 00 E0 0C 00 73 02 ]; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <19 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x02 */ + 1000 0 0 1 40000 31 1 + 1000 0 0 2 40000 32 1 + 1000 0 0 3 40000 33 1 + 1000 0 0 4 40000 34 1 + + /* IDSEL 0x03 */ + 1800 0 0 1 40000 34 1 + 1800 0 0 2 40000 31 1 + 1800 0 0 3 40000 32 1 + 1800 0 0 4 40000 33 1 + + /* IDSEL 0x04 */ + 2000 0 0 1 40000 33 1 + 2000 0 0 2 40000 34 1 + 2000 0 0 3 40000 31 1 + 2000 0 0 4 40000 32 1 + + /* IDSEL 0x05 */ + 2800 0 0 1 40000 32 1 + 2800 0 0 2 40000 33 1 + 2800 0 0 3 40000 34 1 + 2800 0 0 4 40000 31 1 + + /* IDSEL 0x0c */ + 6000 0 0 1 40000 31 1 + 6000 0 0 2 40000 32 1 + 6000 0 0 3 40000 33 1 + 6000 0 0 4 40000 34 1 + + /* IDSEL 0x0d */ + 6800 0 0 1 40000 34 1 + 6800 0 0 2 40000 31 1 + 6800 0 0 3 40000 32 1 + 6800 0 0 4 40000 33 1 + + /* IDSEL 0x0e */ + 7000 0 0 1 40000 33 1 + 7000 0 0 2 40000 34 1 + 7000 0 0 3 40000 31 1 + 7000 0 0 4 40000 32 1 + + /* IDSEL 0x0f */ + 7800 0 0 1 40000 32 1 + 7800 0 0 2 40000 33 1 + 7800 0 0 3 40000 34 1 + 7800 0 0 4 40000 31 1 + + /* IDSEL 0x12 */ + 9000 0 0 1 40000 31 1 + 9000 0 0 2 40000 32 1 + 9000 0 0 3 40000 33 1 + 9000 0 0 4 40000 34 1 + + /* IDSEL 0x13 */ + 9800 0 0 1 40000 34 1 + 9800 0 0 2 40000 31 1 + 9800 0 0 3 40000 32 1 + 9800 0 0 4 40000 33 1 + + /* IDSEL 0x14 */ + a000 0 0 1 40000 33 1 + a000 0 0 2 40000 34 1 + a000 0 0 3 40000 31 1 + a000 0 0 4 40000 32 1 + + /* IDSEL 0x15 */ + a800 0 0 1 40000 32 1 + a800 0 0 2 40000 33 1 + a800 0 0 3 40000 34 1 + a800 0 0 4 40000 31 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts new file mode 100644 index 00000000000..7be0bc659e1 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -0,0 +1,244 @@ +/* + * MPC8541 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8541CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8541@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8541@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts new file mode 100644 index 00000000000..893d7957c17 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -0,0 +1,287 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8548CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8548@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <f 2 10 2 11 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + +/* eTSEC 4 is currently broken + ethernet@27000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <27000 1000>; + local-mac-address = [ 00 E0 0C 00 73 03 ]; + interrupts = <15 2 16 2 17 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + */ + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts new file mode 100644 index 00000000000..118f5a88765 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -0,0 +1,244 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8555CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <0d 2 0e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 359ab89748e..40a39291861 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -115,6 +115,7 @@ static int __init add_legacy_soc_port(struct device_node *np, u64 addr; u32 *addrp; upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + struct device_node *tsi = of_get_parent(np); /* We only support ports that have a clock frequency properly * encoded in the device-tree. @@ -134,7 +135,10 @@ static int __init add_legacy_soc_port(struct device_node *np, /* Add port, irq will be dealt with later. We passed a translated * IO port value. It will be fixed up later along with the irq */ - return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); + if (tsi && !strcmp(tsi->type, "tsi-bridge")) + return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0); + else + return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); } static int __init add_legacy_isa_port(struct device_node *np, @@ -464,7 +468,7 @@ static int __init serial_dev_init(void) fixup_port_irq(i, np, port); if (port->iotype == UPIO_PORT) fixup_port_pio(i, np, port); - if (port->iotype == UPIO_MEM) + if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI)) fixup_port_mmio(i, np, port); } diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 6a7e997c401..11052c212ad 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -598,11 +598,6 @@ static struct device_node *of_irq_find_parent(struct device_node *child) return p; } -static u8 of_irq_pci_swizzle(u8 slot, u8 pin) -{ - return (((pin - 1) + slot) % 4) + 1; -} - /* This doesn't need to be called if you don't have any special workaround * flags to pass */ @@ -891,6 +886,12 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq } EXPORT_SYMBOL_GPL(of_irq_map_one); +#ifdef CONFIG_PCI +static u8 of_irq_pci_swizzle(u8 slot, u8 pin) +{ + return (((pin - 1) + slot) % 4) + 1; +} + int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) { struct device_node *dn, *ppnode; @@ -967,4 +968,4 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) return of_irq_map_raw(ppnode, &lspec, laddr, out_irq); } EXPORT_SYMBOL_GPL(of_irq_map_pci); - +#endif /* CONFIG_PCI */ diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 774c0a3c501..18e59e43d2b 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -417,7 +417,7 @@ static __inline__ void timer_check_rtc(void) /* * This version of gettimeofday has microsecond resolution. */ -static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) +static inline void __do_gettimeofday(struct timeval *tv) { unsigned long sec, usec; u64 tb_ticks, xsec; @@ -431,7 +431,12 @@ static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) * without a divide (and in fact, without a multiply) */ temp_varp = do_gtod.varp; - tb_ticks = tb_val - temp_varp->tb_orig_stamp; + + /* Sampling the time base must be done after loading + * do_gtod.varp in order to avoid racing with update_gtod. + */ + data_barrier(temp_varp); + tb_ticks = get_tb() - temp_varp->tb_orig_stamp; temp_tb_to_xs = temp_varp->tb_to_xs; temp_stamp_xsec = temp_varp->stamp_xsec; xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs); @@ -464,7 +469,7 @@ void do_gettimeofday(struct timeval *tv) tv->tv_usec = usec; return; } - __do_gettimeofday(tv, get_tb()); + __do_gettimeofday(tv); } EXPORT_SYMBOL(do_gettimeofday); @@ -650,6 +655,7 @@ void timer_interrupt(struct pt_regs * regs) int next_dec; int cpu = smp_processor_id(); unsigned long ticks; + u64 tb_next_jiffy; #ifdef CONFIG_PPC32 if (atomic_read(&ppc_n_lost_interrupts) != 0) @@ -691,11 +697,14 @@ void timer_interrupt(struct pt_regs * regs) continue; write_seqlock(&xtime_lock); - tb_last_jiffy += tb_ticks_per_jiffy; - tb_last_stamp = per_cpu(last_jiffy, cpu); - do_timer(regs); - timer_recalc_offset(tb_last_jiffy); - timer_check_rtc(); + tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy; + if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) { + tb_last_jiffy = tb_next_jiffy; + tb_last_stamp = per_cpu(last_jiffy, cpu); + do_timer(regs); + timer_recalc_offset(tb_last_jiffy); + timer_check_rtc(); + } write_sequnlock(&xtime_lock); } diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index e4d1713e8ae..9b352bd0a46 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -585,14 +585,14 @@ static void parse_fpe(struct pt_regs *regs) #define INST_MFSPR_PVR_MASK 0xfc1fffff #define INST_DCBA 0x7c0005ec -#define INST_DCBA_MASK 0x7c0007fe +#define INST_DCBA_MASK 0xfc0007fe #define INST_MCRXR 0x7c000400 -#define INST_MCRXR_MASK 0x7c0007fe +#define INST_MCRXR_MASK 0xfc0007fe #define INST_STRING 0x7c00042a -#define INST_STRING_MASK 0x7c0007fe -#define INST_STRING_GEN_MASK 0x7c00067e +#define INST_STRING_MASK 0xfc0007fe +#define INST_STRING_GEN_MASK 0xfc00067e #define INST_LSWI 0x7c0004aa #define INST_LSWX 0x7c00042a #define INST_STSWI 0x7c0005aa diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 266b8b2ceac..5615acc2952 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -153,7 +153,7 @@ static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp) hpdp->pd = 0; tlb->need_flush = 1; pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM, - HUGEPTE_TABLE_SIZE-1)); + PGF_CACHENUM_MASK)); } #ifdef CONFIG_PPC_64K_PAGES diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 454fc53289a..c3268d9877e 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -14,7 +14,6 @@ config MPC8540_ADS config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE - select PPC_I8259 if PCI help This option enables support for the MPC85xx CDS board diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 06a497676c9..9d2acfbbecc 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -37,79 +37,7 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */ -#else - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ - -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * This is little evil, but works around the fact - * that revA boards have IDSEL starting at 18 - * and others boards (older) start at 12 - * - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */ - }; - - const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - int mpc85xx_exclude_device(u_char bus, u_char devfn) { @@ -119,44 +47,63 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } +void __init +mpc85xx_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} #endif /* CONFIG_PCI */ void __init mpc85xx_ads_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; - - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; - - mpic1 = mpic_alloc(OpenPIC_PAddr, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_ads_openpic_initsenses, - sizeof(mpc85xx_ads_openpic_initsenses), - " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - mpic_init(mpic1); + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if(of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Could not map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Unused on this platform (leave room for 8548) */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); } /* @@ -165,7 +112,9 @@ void __init mpc85xx_ads_pic_init(void) static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; +#ifdef CONFIG_PCI struct device_node *np; +#endif if (ppc_md.progress) ppc_md.progress("mpc85xx_ads_setup_arch()", 0); @@ -186,8 +135,7 @@ static void __init mpc85xx_ads_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; + ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 18e6e11f702..1d357d32a29 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */ -#else - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ -#ifdef CONFIG_PCI - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */ -#else - 0x0, /* External 11: */ -#endif -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - - if (!hose->index) - { - /* Handle PCI1 interrupts */ - char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - - /* Note IRQ assignment for slots is based on which slot the elysium is - * in -- in this setup elysium is in slot #2 (this PIRQA as first - * interrupt on slot */ - { - { 0, 1, 2, 3 }, /* 16 - PMC */ - { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ - { 0, 1, 2, 3 }, /* 18 - Slot 1 */ - { 1, 2, 3, 0 }, /* 19 - Slot 2 */ - { 2, 3, 0, 1 }, /* 20 - Slot 3 */ - { 3, 0, 1, 2 }, /* 21 - Slot 4 */ - }; - - const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; - int i, j; - - for (i = 0; i < 6; i++) - for (j = 0; j < 4; j++) - pci_irq_table[i][j] = - ((pci_irq_table[i][j] + 5 - - cds_pci_slot) & 0x3) + PIRQ0A; - - return PCI_IRQ_TABLE_LOOKUP; - } else { - /* Handle PCI2 interrupts (if we have one) */ - char pci_irq_table[][4] = - { - /* - * We only have one slot and one interrupt - * going to PIRQA - PIRQD */ - { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ - }; - - const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; - - return PCI_IRQ_TABLE_LOOKUP; - } -} #define ARCADIA_HOST_BRIDGE_IDSEL 17 #define ARCADIA_2ND_BRIDGE_IDSEL 3 @@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); pci_dev_put(dev); } + + /* Now map all the PCI irqs */ + dev = NULL; + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + +#ifdef CONFIG_PPC_I8259 +#warning The i8259 PIC support is currently broken +static void mpc85xx_8259_cascade(unsigned int irq, struct + irq_desc *desc, struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + + desc->chip->eoi(irq); } +#endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ void __init mpc85xx_cds_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + struct device_node *cascade_node = NULL; + int cascade_irq; - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } - mpic1 = mpic_alloc(OpenPIC_PAddr, + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_cds_openpic_initsenses, - sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - - mpic_init(mpic1); + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + + /* Return the mpic node */ + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Used only for 8548 so far, but no harm in + * allocating them for everyone */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + +#ifdef CONFIG_PPC_I8259 + /* Initialize the i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + + if (cascade_node == NULL) { + printk(KERN_DEBUG "Could not find i8259 PIC\n"); + return; + } -#ifdef CONFIG_PCI - mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL); + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "Failed to map cascade interrupt\n"); + return; + } - i8259_init(0,0); -#endif + i8259_init(cascade_node, 0); + of_node_put(cascade_node); + + set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade); +#endif /* CONFIG_PPC_I8259 */ } @@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void) add_bridge(np); ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h index 5d2bcf78cef..41e554c4af9 100644 --- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h @@ -16,38 +16,6 @@ #include <linux/init.h> -/* PCI interrupt controller */ -#define PIRQA 3 -#define PIRQB 4 -#define PIRQC 5 -#define PIRQD 6 -#define PIRQ7 7 -#define PIRQE 9 -#define PIRQF 10 -#define PIRQG 11 -#define PIRQH 12 - -/* PCI-Express memory map */ -#define MPC86XX_PCIE_LOWER_IO 0x00000000 -#define MPC86XX_PCIE_UPPER_IO 0x00ffffff - -#define MPC86XX_PCIE_LOWER_MEM 0x80000000 -#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff - -#define MPC86XX_PCIE_IO_BASE 0xe2000000 -#define MPC86XX_PCIE_MEM_OFFSET 0x00000000 - -#define MPC86XX_PCIE_IO_SIZE 0x01000000 - -#define PCIE1_CFG_ADDR_OFFSET (0x8000) -#define PCIE1_CFG_DATA_OFFSET (0x8004) - -#define PCIE2_CFG_ADDR_OFFSET (0x9000) -#define PCIE2_CFG_DATA_OFFSET (0x9004) - -#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET -#define MPC86xx_PCIE_SIZE (0x1000) - #define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */ #endif /* __MPC8641_HPCN_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index ebae73eb006..146da3001c6 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -37,6 +37,14 @@ #include "mpc86xx.h" #include "mpc8641_hpcn.h" +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -44,205 +52,215 @@ unsigned long pci_dram_offset = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - */ - -static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */ - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ - 0x0, /* External 5: */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */ - 0x0, /* External 11: */ - 0x0, - 0x0, - 0x0, - 0x0, -}; - +static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); +} void __init mpc86xx_hpcn_init_irq(void) { struct mpic *mpic1; + struct device_node *np, *cascade_node = NULL; + int cascade_irq; phys_addr_t openpic_paddr; + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) + return; + /* Determine the Physical Address of the OpenPIC regs */ openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; /* Alloc mpic structure and per isu has 16 INT entries. */ - mpic1 = mpic_alloc(openpic_paddr, + mpic1 = mpic_alloc(np, openpic_paddr, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc86xx_hpcn_openpic_initsenses, - sizeof(mpc86xx_hpcn_openpic_initsenses), + 16, NR_IRQS - 4, " MPIC "); BUG_ON(mpic1 == NULL); + mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000); + /* 48 Internal Interrupts */ - mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200); - mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400); - mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600); + mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200); + mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400); + mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600); - /* 16 External interrupts */ - mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000); + /* 16 External interrupts + * Moving them from [0 - 15] to [64 - 79] + */ + mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000); mpic_init(mpic1); #ifdef CONFIG_PCI - mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL); - i8259_init(0, I8259_OFFSET); -#endif -} + /* Initialize i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + if (cascade_node == NULL) { + printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n"); + return; + } + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt"); + return; + } + DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq); + i8259_init(cascade_node, 0); + set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade); +#endif +} #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH}; +const unsigned char uli1575_irq_route_table[16] = { + 0, /* 0: Reserved */ + 0x8, /* 1: 0b1000 */ + 0, /* 2: Reserved */ + 0x2, /* 3: 0b0010 */ + 0x4, /* 4: 0b0100 */ + 0x5, /* 5: 0b0101 */ + 0x7, /* 6: 0b0111 */ + 0x6, /* 7: 0b0110 */ + 0, /* 8: Reserved */ + 0x1, /* 9: 0b0001 */ + 0x3, /* 10: 0b0011 */ + 0x9, /* 11: 0b1001 */ + 0xb, /* 12: 0b1011 */ + 0, /* 13: Reserved */ + 0xd, /* 14, 0b1101 */ + 0xf, /* 15, 0b1111 */ +}; + +static int __devinit +get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) { - static char pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */ - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */ - {0, 0, 0, 0}, /* IDSEL 19 */ - {0, 0, 0, 0}, /* IDSEL 20 */ - {0, 0, 0, 0}, /* IDSEL 21 */ - {0, 0, 0, 0}, /* IDSEL 22 */ - {0, 0, 0, 0}, /* IDSEL 23 */ - {0, 0, 0, 0}, /* IDSEL 24 */ - {0, 0, 0, 0}, /* IDSEL 25 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/ - {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */ - {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */ - {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */ - {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/ - {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */ - }; - - const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; + struct of_irq oirq; + u32 laddr[3]; + struct device_node *hosenode = hose ? hose->arch_data : NULL; + + if (!hosenode) return -EINVAL; + + laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); + laddr[1] = laddr[2] = 0; + of_irq_map_raw(hosenode, &pin, laddr, &oirq); + DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n", + laddr[0], slot, pin, oirq.specifier[0]); + return oirq.specifier[0]; } -static void __devinit quirk_ali1575(struct pci_dev *dev) +static void __devinit quirk_uli1575(struct pci_dev *dev) { unsigned short temp; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned char irq2pin[16]; + unsigned long pirq_map_word = 0; + u32 irq; + int i; /* - * ALI1575 interrupts route table setup: + * ULI1575 interrupts route setup + */ + memset(irq2pin, 0, 16); /* Initialize default value 0 */ + + /* + * PIRQA -> PIRQD mapping read from OF-tree + * + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA + */ + for (i = 0; i < 4; i++){ + irq = get_pci_irq_from_of(hose, 17, i + 1); + if (irq > 0 && irq < 16) + irq2pin[irq] = PIRQA + i; + else + printk(KERN_WARNING "ULI1575 device" + "(slot %d, pin %d) irq %d is invalid.\n", + 17, i, irq); + } + + /* + * PIRQE -> PIRQF mapping set manually * * IRQ pin IRQ# - * PIRQA ---- 3 - * PIRQB ---- 4 - * PIRQC ---- 5 - * PIRQD ---- 6 * PIRQE ---- 9 * PIRQF ---- 10 * PIRQG ---- 11 * PIRQH ---- 12 - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA */ - pci_write_config_dword(dev, 0x48, 0xb9317542); + for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i; + + /* Set IRQ-PIRQ Mapping to ULI1575 */ + for (i = 0; i < 16; i++) + if (irq2pin[i]) + pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) + << ((irq2pin[i] - PIRQA) * 4); - /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x86, 0x0c); + /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ + DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", + pirq_map_word); + pci_write_config_dword(dev, 0x48, pirq_map_word); - /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x87, 0x0d); +#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ + do { \ + int irq; \ + irq = get_pci_irq_from_of(hose, slot, pin); \ + if (irq > 0 && irq < 16) \ + pci_write_config_byte(dev, reg, irq2pin[irq]); \ + else \ + printk(KERN_WARNING "ULI1575 device" \ + "(slot %d, pin %d) irq %d is invalid.\n", \ + slot, pin, irq); \ + } while(0) - /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ - pci_write_config_byte(dev, 0x88, 0x0f); + /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ + ULI1575_SET_DEV_IRQ(28, 1, 0x86); - /* USB 2.0 controller, interrupt: PIRQ7 */ - pci_write_config_byte(dev, 0x74, 0x06); + /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ + ULI1575_SET_DEV_IRQ(28, 2, 0x87); - /* Audio controller, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x8a, 0x0c); + /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ + ULI1575_SET_DEV_IRQ(28, 3, 0x88); - /* Modem controller, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x8b, 0x0d); + /* USB 2.0 controller, slot 28, pin 4 */ + irq = get_pci_irq_from_of(hose, 28, 4); + if (irq >= 0 && irq <=15) + pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - /* HD audio controller, interrupt: PIRQG */ - pci_write_config_byte(dev, 0x8c, 0x0e); + /* Audio controller, slot 29, pin 1 */ + ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - /* Serial ATA interrupt: PIRQD */ - pci_write_config_byte(dev, 0x8d, 0x0b); + /* Modem controller, slot 29, pin 2 */ + ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - /* SMB interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8e, 0x0f); + /* HD audio controller, slot 29, pin 3 */ + ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - /* PMU ACPI SCI interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8f, 0x0f); + /* SMB interrupt: slot 30, pin 1 */ + ULI1575_SET_DEV_IRQ(30, 1, 0x8e); + + /* PMU ACPI SCI interrupt: slot 30, pin 2 */ + ULI1575_SET_DEV_IRQ(30, 2, 0x8f); + + /* Serial ATA interrupt: slot 31, pin 1 */ + ULI1575_SET_DEV_IRQ(31, 1, 0x8d); /* Primary PATA IDE IRQ: 14 * Secondary PATA IDE IRQ: 15 */ - pci_write_config_byte(dev, 0x44, 0x3d); - pci_write_config_byte(dev, 0x75, 0x0f); + pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); + pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); /* Set IRQ14 and IRQ15 to legacy IRQs */ pci_read_config_word(dev, 0x46, &temp); @@ -264,6 +282,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev) */ outb(0xfa, 0x4d0); outb(0x1e, 0x4d1); + +#undef ULI1575_SET_DEV_IRQ } static void __devinit quirk_uli5288(struct pci_dev *dev) @@ -306,7 +326,7 @@ static void __devinit early_uli5249(struct pci_dev *dev) dev->class |= 0x1; } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); @@ -337,8 +357,6 @@ mpc86xx_hpcn_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc86xx_map_irq; ppc_md.pci_exclude_device = mpc86xx_exclude_device; #endif @@ -377,6 +395,15 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) } +void __init mpc86xx_hpcn_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + + /* * Called very early, device-tree isn't unflattened */ @@ -431,6 +458,7 @@ define_machine(mpc86xx_hpcn) { .setup_arch = mpc86xx_hpcn_setup_arch, .init_IRQ = mpc86xx_hpcn_init_irq, .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, + .pcibios_fixup = mpc86xx_hpcn_pcibios_fixup, .get_irq = mpic_get_irq, .restart = mpc86xx_restart, .time_init = mpc86xx_time_init, diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index d7a4fc7ca23..ed00ed2455d 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -1,7 +1,7 @@ /* * mpc7448_hpc2.c * - * Board setup routines for the Freescale Taiga platform + * Board setup routines for the Freescale mpc7448hpc2(taiga) platform * * Author: Jacob Pan * jacob.pan@freescale.com @@ -12,10 +12,10 @@ * * Copyright 2004-2006 Freescale Semiconductor, Inc. * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. */ #include <linux/config.h> @@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; extern int tsi108_setup_pci(struct device_node *dev); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); extern void tsi108_pci_int_init(void); -extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); - -/* - * Define all of the IRQ senses and polarities. Taken from the - * mpc7448hpc manual. - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ - -static u_char mpc7448_hpc2_pic_initsenses[] __initdata = { - /* External on-board sources */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */ - /* Internal Tsi108/109 interrupt sources */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */ -}; +extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs); int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) { @@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; phys_addr_t mpic_paddr = 0; + unsigned int cascade_pci_irq; + struct device_node *tsi_pci; struct device_node *tsi_pic; tsi_pic = of_find_node_by_type(NULL, "open-pic"); @@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void) DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, (u32) mpic_paddr); - mpic = mpic_alloc(mpic_paddr, + mpic = mpic_alloc(tsi_pic, mpic_paddr, MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), 0, /* num_sources used */ - TSI108_IRQ_BASE, 0, /* num_sources used */ - NR_IRQS - 4 /* XXXX */, - mpc7448_hpc2_pic_initsenses, - sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC"); + "Tsi108_PIC"); BUG_ON(mpic == NULL); /* XXXX */ - mpic_init(mpic); - mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); + + tsi_pci = of_find_node_by_type(NULL, "pci"); + if (tsi_pci == 0) { + printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + return; + } + + cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); + set_irq_data(cascade_pci_irq, mpic); + set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); + tsi108_pci_int_init(); /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); + of_node_put(tsi_pic); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) @@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs) return 0; } + define_machine(mpc7448_hpc2){ .name = "MPC7448 HPC2", .probe = mpc7448_hpc2_probe, diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index 6a026c733f6..9d73d0234c5 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -411,8 +411,15 @@ static unsigned long __init bootx_flatten_dt(unsigned long start) DBG("End of boot params: %x\n", mem_end); rsvmap[0] = mem_start; rsvmap[1] = mem_end; - rsvmap[2] = 0; - rsvmap[3] = 0; + if (bootx_info->ramDisk) { + rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk; + rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize; + rsvmap[4] = 0; + rsvmap[5] = 0; + } else { + rsvmap[2] = 0; + rsvmap[3] = 0; + } return (unsigned long)hdr; } @@ -543,12 +550,12 @@ void __init bootx_init(unsigned long r3, unsigned long r4) */ if (bi->version < 5) { space = bi->deviceTreeOffset + bi->deviceTreeSize; - if (bi->ramDisk) + if (bi->ramDisk >= space) space = bi->ramDisk + bi->ramDiskSize; } else space = bi->totalParamsSize; - bootx_printf("Total space used by parameters & ramdisk: %x \n", space); + bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space); /* New BootX will have flushed all TLBs and enters kernel with * MMU switched OFF, so this should not be useful anymore. diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 12b65609c07..ef10bcf2d94 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -85,11 +85,8 @@ static int __init gfar_mdio_of_init(void) mdio_data.irq[k] = -1; while ((child = of_get_next_child(np, child)) != NULL) { - if (child->n_intrs) { - u32 *id = - (u32 *) get_property(child, "reg", NULL); - mdio_data.irq[*id] = child->intrs[0].line; - } + u32 *id = get_property(child, "reg", NULL); + mdio_data.irq[*id] = irq_of_parse_and_map(child, 0); } ret = @@ -131,6 +128,7 @@ static int __init gfar_of_init(void) char *model; void *mac_addr; phandle *ph; + int n_res = 1; memset(r, 0, sizeof(r)); memset(&gfar_data, 0, sizeof(gfar_data)); @@ -139,8 +137,7 @@ static int __init gfar_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; model = get_property(np, "model", NULL); @@ -150,19 +147,19 @@ static int __init gfar_of_init(void) r[1].name = gfar_tx_intr; r[2].name = gfar_rx_intr; - r[2].start = np->intrs[1].line; - r[2].end = np->intrs[1].line; + r[2].start = r[2].end = irq_of_parse_and_map(np, 1); r[2].flags = IORESOURCE_IRQ; r[3].name = gfar_err_intr; - r[3].start = np->intrs[2].line; - r[3].end = np->intrs[2].line; + r[3].start = r[3].end = irq_of_parse_and_map(np, 2); r[3].flags = IORESOURCE_IRQ; + + n_res += 2; } gfar_dev = platform_device_register_simple("fsl-gianfar", i, &r[0], - np->n_intrs + 1); + n_res + 1); if (IS_ERR(gfar_dev)) { ret = PTR_ERR(gfar_dev); @@ -259,8 +256,7 @@ static int __init fsl_i2c_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2); @@ -396,8 +392,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; usb_dev_mph = @@ -445,8 +440,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto unreg_mph; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; usb_dev_dr = diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index 26a0cc820cd..f3038461d4c 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void) goto err; r[1].name = "tx"; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = irq_of_parse_and_map(np, 0); + r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; + DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", + __FUNCTION__,r[1].name, r[1].start, r[1].end); tsi_eth_dev = platform_device_register_simple("tsi-ethernet", i, &r[0], - np->n_intrs + 1); + 1); if (IS_ERR(tsi_eth_dev)) { ret = PTR_ERR(tsi_eth_dev); @@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void) tsi_eth_data.regs = r[0].start; tsi_eth_data.phyregs = res.start; tsi_eth_data.phy = *phy_id; - tsi_eth_data.irq_num = np->intrs[0].line; + tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0); of_node_put(phy); ret = platform_device_add_data(tsi_eth_dev, &tsi_eth_data, diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 3265d54c82e..2ab06ed3ae7 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -26,7 +26,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> - #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> @@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev) (hose)->ops = &tsi108_direct_pci_ops; - printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. " "Firmware bus number: %d->%d\n", rsrc.start, hose->first_busno, hose->last_busno); @@ -278,7 +277,7 @@ static void init_pci_source(void) mb(); } -static inline int get_pci_source(void) +static inline unsigned int get_pci_source(void) { u_int temp = 0; int irq = -1; @@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq) * Interrupt controller descriptor for cascaded PCI interrupt controller. */ -struct hw_interrupt_type tsi108_pci_irq = { +static struct irq_chip tsi108_pci_irq = { .typename = "tsi108_PCI_int", - .enable = tsi108_pci_irq_enable, - .disable = tsi108_pci_irq_disable, + .mask = tsi108_pci_irq_disable, .ack = tsi108_pci_irq_ack, .end = tsi108_pci_irq_end, + .unmask = tsi108_pci_irq_enable, }; /* @@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void) DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); for (i = 0; i < NUM_PCI_IRQS; i++) { - irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; + irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq; irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; } init_pci_source(); } -int tsi108_irq_cascade(struct pt_regs *regs, void *unused) +void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) { - return get_pci_source(); + unsigned int cascade_irq = get_pci_source(); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); } diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index aae3123bf3e..3a3aee08ec5 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1561,7 +1561,7 @@ restart: /* ->key must be copied to avoid race with cfq_exit_queue() */ k = __cic->key; if (unlikely(!k)) { - cfq_drop_dead_cic(ioc, cic); + cfq_drop_dead_cic(ioc, __cic); goto restart; } diff --git a/block/elevator.c b/block/elevator.c index bc7baeec0d1..9b72dc7c8a5 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -765,7 +765,8 @@ void elv_unregister(struct elevator_type *e) read_lock(&tasklist_lock); do_each_thread(g, p) { task_lock(p); - e->ops.trim(p->io_context); + if (p->io_context) + e->ops.trim(p->io_context); task_unlock(p); } while_each_thread(g, p); read_unlock(&tasklist_lock); diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 61d6b3c65b6..ddd9253f9d5 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -3628,6 +3628,8 @@ struct io_context *current_io_context(gfp_t gfp_flags) ret->nr_batch_requests = 0; /* because this is 0 */ ret->aic = NULL; ret->cic_root.rb_node = NULL; + /* make sure set_task_ioprio() sees the settings above */ + smp_wmb(); tsk->io_context = ret; } diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 96309b9660d..11abc7bf777 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -285,6 +285,8 @@ static int __init acpi_ac_init(void) { int result; + if (acpi_disabled) + return -ENODEV; acpi_ac_dir = acpi_lock_ac_dir(); if (!acpi_ac_dir) diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index b0d4b147b19..1dda370f402 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -484,10 +484,8 @@ acpi_memory_register_notify_handler(acpi_handle handle, status = is_memory_device(handle); - if (ACPI_FAILURE(status)){ - ACPI_EXCEPTION((AE_INFO, status, "handle is no memory device")); + if (ACPI_FAILURE(status)) return AE_OK; /* continue */ - } status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, acpi_memory_device_notify, NULL); @@ -503,10 +501,8 @@ acpi_memory_deregister_notify_handler(acpi_handle handle, status = is_memory_device(handle); - if (ACPI_FAILURE(status)){ - ACPI_EXCEPTION((AE_INFO, status, "handle is no memory device")); + if (ACPI_FAILURE(status)) return AE_OK; /* continue */ - } status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 6e5221707d9..9810e2a55d0 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -757,6 +757,9 @@ static int __init acpi_battery_init(void) { int result; + if (acpi_disabled) + return -ENODEV; + acpi_battery_dir = acpi_lock_battery_dir(); if (!acpi_battery_dir) return -ENODEV; diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index b2977695e12..279c4bac92e 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -25,6 +25,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/ioport.h> +#include <linux/kernel.h> #include <linux/list.h> #include <linux/sched.h> #include <linux/pm.h> @@ -68,7 +69,8 @@ int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device) status = acpi_get_data(handle, acpi_bus_data_handler, (void **)device); if (ACPI_FAILURE(status) || !*device) { - ACPI_EXCEPTION((AE_INFO, status, "No context for object [%p]", handle)); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n", + handle)); return -ENODEV; } @@ -192,7 +194,7 @@ int acpi_bus_set_power(acpi_handle handle, int state) /* Make sure this is a valid target state */ if (!device->flags.power_manageable) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable", + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable\n", device->kobj.name)); return -ENODEV; } @@ -738,7 +740,10 @@ static int __init acpi_init(void) return -ENODEV; } - firmware_register(&acpi_subsys); + result = firmware_register(&acpi_subsys); + if (result < 0) + printk(KERN_WARNING "%s: firmware_register error: %d\n", + __FUNCTION__, result); result = acpi_bus_init(); diff --git a/drivers/acpi/hotkey.c b/drivers/acpi/hotkey.c index 32c9d88fd19..1ba2db67186 100644 --- a/drivers/acpi/hotkey.c +++ b/drivers/acpi/hotkey.c @@ -91,6 +91,14 @@ enum { HK_EVENT_ENTERRING_S5, }; +enum conf_entry_enum { + bus_handle = 0, + bus_method = 1, + action_handle = 2, + method = 3, + LAST_CONF_ENTRY +}; + /* procdir we use */ static struct proc_dir_entry *hotkey_proc_dir; static struct proc_dir_entry *hotkey_config; @@ -244,19 +252,15 @@ static int hotkey_info_open_fs(struct inode *inode, struct file *file) static char *format_result(union acpi_object *object) { - char *buf = NULL; - - buf = (char *)kmalloc(RESULT_STR_LEN, GFP_KERNEL); - if (buf) - memset(buf, 0, RESULT_STR_LEN); - else - goto do_fail; + char *buf; + buf = kzalloc(RESULT_STR_LEN, GFP_KERNEL); + if (!buf) + return NULL; /* Now, just support integer type */ if (object->type == ACPI_TYPE_INTEGER) sprintf(buf, "%d\n", (u32) object->integer.value); - do_fail: - return (buf); + return buf; } static int hotkey_polling_seq_show(struct seq_file *seq, void *offset) @@ -486,98 +490,102 @@ static void free_hotkey_device(union acpi_hotkey *key) static void free_hotkey_buffer(union acpi_hotkey *key) { + /* key would never be null, action method could be */ kfree(key->event_hotkey.action_method); } static void free_poll_hotkey_buffer(union acpi_hotkey *key) { + /* key would never be null, others could be*/ kfree(key->poll_hotkey.action_method); kfree(key->poll_hotkey.poll_method); kfree(key->poll_hotkey.poll_result); } static int -init_hotkey_device(union acpi_hotkey *key, char *bus_str, char *action_str, - char *method, int std_num, int external_num) +init_hotkey_device(union acpi_hotkey *key, char **config_entry, + int std_num, int external_num) { acpi_handle tmp_handle; acpi_status status = AE_OK; - if (std_num < 0 || IS_POLL(std_num) || !key) goto do_fail; - if (!bus_str || !action_str || !method) + if (!config_entry[bus_handle] || !config_entry[action_handle] + || !config_entry[method]) goto do_fail; key->link.hotkey_type = ACPI_HOTKEY_EVENT; key->link.hotkey_standard_num = std_num; key->event_hotkey.flag = 0; - key->event_hotkey.action_method = method; + key->event_hotkey.action_method = config_entry[method]; - status = - acpi_get_handle(NULL, bus_str, &(key->event_hotkey.bus_handle)); + status = acpi_get_handle(NULL, config_entry[bus_handle], + &(key->event_hotkey.bus_handle)); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; key->event_hotkey.external_hotkey_num = external_num; - status = - acpi_get_handle(NULL, action_str, + status = acpi_get_handle(NULL, config_entry[action_handle], &(key->event_hotkey.action_handle)); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; status = acpi_get_handle(key->event_hotkey.action_handle, - method, &tmp_handle); + config_entry[method], &tmp_handle); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; return AE_OK; - do_fail: +do_fail_zero: + key->event_hotkey.action_method = NULL; +do_fail: return -ENODEV; } static int -init_poll_hotkey_device(union acpi_hotkey *key, - char *poll_str, - char *poll_method, - char *action_str, char *action_method, int std_num) +init_poll_hotkey_device(union acpi_hotkey *key, char **config_entry, + int std_num) { acpi_status status = AE_OK; acpi_handle tmp_handle; - if (std_num < 0 || IS_EVENT(std_num) || !key) goto do_fail; - - if (!poll_str || !poll_method || !action_str || !action_method) + if (!config_entry[bus_handle] ||!config_entry[bus_method] || + !config_entry[action_handle] || !config_entry[method]) goto do_fail; key->link.hotkey_type = ACPI_HOTKEY_POLLING; key->link.hotkey_standard_num = std_num; key->poll_hotkey.flag = 0; - key->poll_hotkey.poll_method = poll_method; - key->poll_hotkey.action_method = action_method; + key->poll_hotkey.poll_method = config_entry[bus_method]; + key->poll_hotkey.action_method = config_entry[method]; - status = - acpi_get_handle(NULL, poll_str, &(key->poll_hotkey.poll_handle)); + status = acpi_get_handle(NULL, config_entry[bus_handle], + &(key->poll_hotkey.poll_handle)); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; status = acpi_get_handle(key->poll_hotkey.poll_handle, - poll_method, &tmp_handle); + config_entry[bus_method], &tmp_handle); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; status = - acpi_get_handle(NULL, action_str, + acpi_get_handle(NULL, config_entry[action_handle], &(key->poll_hotkey.action_handle)); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; status = acpi_get_handle(key->poll_hotkey.action_handle, - action_method, &tmp_handle); + config_entry[method], &tmp_handle); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; key->poll_hotkey.poll_result = (union acpi_object *)kmalloc(sizeof(union acpi_object), GFP_KERNEL); if (!key->poll_hotkey.poll_result) - goto do_fail; + goto do_fail_zero; return AE_OK; - do_fail: + +do_fail_zero: + key->poll_hotkey.poll_method = NULL; + key->poll_hotkey.action_method = NULL; +do_fail: return -ENODEV; } @@ -652,17 +660,18 @@ static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset) } static int -get_parms(char *config_record, - int *cmd, - char **bus_handle, - char **bus_method, - char **action_handle, - char **method, int *internal_event_num, int *external_event_num) +get_parms(char *config_record, int *cmd, char **config_entry, + int *internal_event_num, int *external_event_num) { +/* the format of *config_record = + * "1:\d+:*" : "cmd:internal_event_num" + * "\d+:\w+:\w+:\w+:\w+:\d+:\d+" : + * "cmd:bus_handle:bus_method:action_handle:method:internal_event_num:external_event_num" + */ char *tmp, *tmp1, count; + int i; sscanf(config_record, "%d", cmd); - if (*cmd == 1) { if (sscanf(config_record, "%d:%d", cmd, internal_event_num) != 2) @@ -674,59 +683,27 @@ get_parms(char *config_record, if (!tmp) goto do_fail; tmp++; - tmp1 = strchr(tmp, ':'); - if (!tmp1) - goto do_fail; - - count = tmp1 - tmp; - *bus_handle = (char *)kmalloc(count + 1, GFP_KERNEL); - if (!*bus_handle) - goto do_fail; - strncpy(*bus_handle, tmp, count); - *(*bus_handle + count) = 0; - - tmp = tmp1; - tmp++; - tmp1 = strchr(tmp, ':'); - if (!tmp1) - goto do_fail; - count = tmp1 - tmp; - *bus_method = (char *)kmalloc(count + 1, GFP_KERNEL); - if (!*bus_method) - goto do_fail; - strncpy(*bus_method, tmp, count); - *(*bus_method + count) = 0; - - tmp = tmp1; - tmp++; - tmp1 = strchr(tmp, ':'); - if (!tmp1) - goto do_fail; - count = tmp1 - tmp; - *action_handle = (char *)kmalloc(count + 1, GFP_KERNEL); - if (!*action_handle) - goto do_fail; - strncpy(*action_handle, tmp, count); - *(*action_handle + count) = 0; - - tmp = tmp1; - tmp++; - tmp1 = strchr(tmp, ':'); - if (!tmp1) - goto do_fail; - count = tmp1 - tmp; - *method = (char *)kmalloc(count + 1, GFP_KERNEL); - if (!*method) - goto do_fail; - strncpy(*method, tmp, count); - *(*method + count) = 0; - - if (sscanf(tmp1 + 1, "%d:%d", internal_event_num, external_event_num) <= - 0) - goto do_fail; - - return 6; - do_fail: + for (i = 0; i < LAST_CONF_ENTRY; i++) { + tmp1 = strchr(tmp, ':'); + if (!tmp1) { + goto do_fail; + } + count = tmp1 - tmp; + config_entry[i] = kzalloc(count + 1, GFP_KERNEL); + if (!config_entry[i]) + goto handle_failure; + strncpy(config_entry[i], tmp, count); + tmp = tmp1 + 1; + } + if (sscanf(tmp, "%d:%d", internal_event_num, external_event_num) <= 0) + goto handle_failure; + if (!IS_OTHERS(*internal_event_num)) { + return 6; + } +handle_failure: + while (i-- > 0) + kfree(config_entry[i]); +do_fail: return -1; } @@ -736,50 +713,34 @@ static ssize_t hotkey_write_config(struct file *file, size_t count, loff_t * data) { char *config_record = NULL; - char *bus_handle = NULL; - char *bus_method = NULL; - char *action_handle = NULL; - char *method = NULL; + char *config_entry[LAST_CONF_ENTRY]; int cmd, internal_event_num, external_event_num; int ret = 0; - union acpi_hotkey *key = NULL; + union acpi_hotkey *key = kzalloc(sizeof(union acpi_hotkey), GFP_KERNEL); + if (!key) + return -ENOMEM; - config_record = (char *)kmalloc(count + 1, GFP_KERNEL); - if (!config_record) + config_record = kzalloc(count + 1, GFP_KERNEL); + if (!config_record) { + kfree(key); return -ENOMEM; + } if (copy_from_user(config_record, buffer, count)) { kfree(config_record); + kfree(key); printk(KERN_ERR PREFIX "Invalid data\n"); return -EINVAL; } - config_record[count] = 0; - - ret = get_parms(config_record, - &cmd, - &bus_handle, - &bus_method, - &action_handle, - &method, &internal_event_num, &external_event_num); - + ret = get_parms(config_record, &cmd, config_entry, + &internal_event_num, &external_event_num); kfree(config_record); - if (IS_OTHERS(internal_event_num)) - goto do_fail; if (ret != 6) { - do_fail: - kfree(bus_handle); - kfree(bus_method); - kfree(action_handle); - kfree(method); printk(KERN_ERR PREFIX "Invalid data format ret=%d\n", ret); return -EINVAL; } - key = kmalloc(sizeof(union acpi_hotkey), GFP_KERNEL); - if (!key) - goto do_fail; - memset(key, 0, sizeof(union acpi_hotkey)); if (cmd == 1) { union acpi_hotkey *tmp = NULL; tmp = get_hotkey_by_event(&global_hotkey_list, @@ -791,34 +752,19 @@ static ssize_t hotkey_write_config(struct file *file, goto cont_cmd; } if (IS_EVENT(internal_event_num)) { - kfree(bus_method); - ret = init_hotkey_device(key, bus_handle, action_handle, method, - internal_event_num, - external_event_num); - } else - ret = init_poll_hotkey_device(key, bus_handle, bus_method, - action_handle, method, - internal_event_num); - if (ret) { - kfree(bus_handle); - kfree(action_handle); - if (IS_EVENT(internal_event_num)) - free_hotkey_buffer(key); - else - free_poll_hotkey_buffer(key); - kfree(key); - printk(KERN_ERR PREFIX "Invalid hotkey\n"); - return -EINVAL; + if (init_hotkey_device(key, config_entry, + internal_event_num, external_event_num)) + goto init_hotkey_fail; + } else { + if (init_poll_hotkey_device(key, config_entry, + internal_event_num)) + goto init_poll_hotkey_fail; } - - cont_cmd: - kfree(bus_handle); - kfree(action_handle); - +cont_cmd: switch (cmd) { case 0: - if (get_hotkey_by_event - (&global_hotkey_list, key->link.hotkey_standard_num)) + if (get_hotkey_by_event(&global_hotkey_list, + key->link.hotkey_standard_num)) goto fail_out; else hotkey_add(key); @@ -827,6 +773,7 @@ static ssize_t hotkey_write_config(struct file *file, hotkey_remove(key); break; case 2: + /* key is kfree()ed if matched*/ if (hotkey_update(key)) goto fail_out; break; @@ -835,11 +782,22 @@ static ssize_t hotkey_write_config(struct file *file, break; } return count; - fail_out: - if (IS_EVENT(internal_event_num)) - free_hotkey_buffer(key); - else - free_poll_hotkey_buffer(key); + +init_poll_hotkey_fail: /* failed init_poll_hotkey_device */ + kfree(config_entry[bus_method]); + config_entry[bus_method] = NULL; +init_hotkey_fail: /* failed init_hotkey_device */ + kfree(config_entry[method]); +fail_out: + kfree(config_entry[bus_handle]); + kfree(config_entry[action_handle]); + /* No double free since elements =NULL for error cases */ + if (IS_EVENT(internal_event_num)) { + if (config_entry[bus_method]) + kfree(config_entry[bus_method]); + free_hotkey_buffer(key); /* frees [method] */ + } else + free_poll_hotkey_buffer(key); /* frees [bus_method]+[method] */ kfree(key); printk(KERN_ERR PREFIX "invalid key\n"); return -EINVAL; @@ -923,10 +881,9 @@ static ssize_t hotkey_execute_aml_method(struct file *file, union acpi_hotkey *key; - arg = (char *)kmalloc(count + 1, GFP_KERNEL); + arg = kzalloc(count + 1, GFP_KERNEL); if (!arg) return -ENOMEM; - arg[count] = 0; if (copy_from_user(arg, buffer, count)) { kfree(arg); diff --git a/drivers/acpi/i2c_ec.c b/drivers/acpi/i2c_ec.c index 84239d51dc0..6809c283ec5 100644 --- a/drivers/acpi/i2c_ec.c +++ b/drivers/acpi/i2c_ec.c @@ -330,7 +330,7 @@ static int acpi_ec_hc_add(struct acpi_device *device) status = acpi_evaluate_integer(ec_hc->handle, "_EC", NULL, &val); if (ACPI_FAILURE(status)) { ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Error obtaining _EC\n")); - kfree(ec_hc->smbus); + kfree(ec_hc); kfree(smbus); return -EIO; } diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index b7d1514cd19..507f051d1ce 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -746,6 +746,16 @@ acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout) ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Waiting for semaphore[%p|%d|%d]\n", handle, units, timeout)); + /* + * This can be called during resume with interrupts off. + * Like boot-time, we should be single threaded and will + * always get the lock if we try -- timeout or not. + * If this doesn't succeed, then we will oops courtesy of + * might_sleep() in down(). + */ + if (!down_trylock(sem)) + return AE_OK; + switch (timeout) { /* * No Wait: diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index db7b350a503..62bef0b3b61 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -1714,6 +1714,9 @@ static int __init acpi_sbs_init(void) { int result = 0; + if (acpi_disabled) + return -ENODEV; + init_MUTEX(&sbs_sem); if (capacity_mode != DEF_CAPACITY_UNIT diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 5fcb50c7b77..698a1540e30 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -4,6 +4,7 @@ #include <linux/module.h> #include <linux/init.h> +#include <linux/kernel.h> #include <linux/acpi.h> #include <acpi/acpi_drivers.h> @@ -113,6 +114,8 @@ static struct kset acpi_namespace_kset = { static void acpi_device_register(struct acpi_device *device, struct acpi_device *parent) { + int err; + /* * Linkage * ------- @@ -138,7 +141,10 @@ static void acpi_device_register(struct acpi_device *device, device->kobj.parent = &parent->kobj; device->kobj.ktype = &ktype_acpi_ns; device->kobj.kset = &acpi_namespace_kset; - kobject_register(&device->kobj); + err = kobject_register(&device->kobj); + if (err < 0) + printk(KERN_WARNING "%s: kobject_register error: %d\n", + __FUNCTION__, err); create_sysfs_device_files(device); } @@ -1450,7 +1456,9 @@ static int __init acpi_scan_init(void) if (acpi_disabled) return 0; - kset_register(&acpi_namespace_kset); + result = kset_register(&acpi_namespace_kset); + if (result < 0) + printk(KERN_ERR PREFIX "kset_register error: %d\n", result); result = bus_register(&acpi_bus_type); if (result) { diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index f48227f4c8c..d0d84c43a9d 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -262,7 +262,7 @@ acpi_evaluate_integer(acpi_handle handle, if (!data) return AE_BAD_PARAMETER; - element = kmalloc(sizeof(union acpi_object), GFP_KERNEL); + element = kmalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL); if (!element) return AE_NO_MEMORY; diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index e05ca2cdc73..75313ade2e0 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -301,7 +301,8 @@ static void ib_cache_event(struct ib_event_handler *handler, event->event == IB_EVENT_PORT_ACTIVE || event->event == IB_EVENT_LID_CHANGE || event->event == IB_EVENT_PKEY_CHANGE || - event->event == IB_EVENT_SM_CHANGE) { + event->event == IB_EVENT_SM_CHANGE || + event->event == IB_EVENT_CLIENT_REREGISTER) { work = kmalloc(sizeof *work, GFP_ATOMIC); if (work) { INIT_WORK(&work->work, ib_cache_task, work); diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index aeda484ffd8..d6b84226bba 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -405,7 +405,8 @@ static void ib_sa_event(struct ib_event_handler *handler, struct ib_event *event event->event == IB_EVENT_PORT_ACTIVE || event->event == IB_EVENT_LID_CHANGE || event->event == IB_EVENT_PKEY_CHANGE || - event->event == IB_EVENT_SM_CHANGE) { + event->event == IB_EVENT_SM_CHANGE || + event->event == IB_EVENT_CLIENT_REREGISTER) { struct ib_sa_device *sa_dev; sa_dev = container_of(handler, typeof(*sa_dev), event_handler); diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 557cde3a456..7b82c1907f0 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -967,12 +967,12 @@ static struct { } mthca_hca_table[] = { [TAVOR] = { .latest_fw = MTHCA_FW_VER(3, 4, 0), .flags = 0 }, - [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 7, 400), + [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 7, 600), .flags = MTHCA_FLAG_PCIE }, - [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 1, 0), + [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 1, 400), .flags = MTHCA_FLAG_MEMFREE | MTHCA_FLAG_PCIE }, - [SINAI] = { .latest_fw = MTHCA_FW_VER(1, 0, 800), + [SINAI] = { .latest_fw = MTHCA_FW_VER(1, 1, 0), .flags = MTHCA_FLAG_MEMFREE | MTHCA_FLAG_PCIE | MTHCA_FLAG_SINAI_OPT } diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 230ae21db8f..265b1d1c4a6 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1287,11 +1287,7 @@ int mthca_register_device(struct mthca_dev *dev) (1ull << IB_USER_VERBS_CMD_MODIFY_QP) | (1ull << IB_USER_VERBS_CMD_DESTROY_QP) | (1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) | - (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) | - (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) | - (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) | - (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) | - (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ); + (1ull << IB_USER_VERBS_CMD_DETACH_MCAST); dev->ib_dev.node_type = IB_NODE_CA; dev->ib_dev.phys_port_cnt = dev->limits.num_ports; dev->ib_dev.dma_device = &dev->pdev->dev; @@ -1316,6 +1312,11 @@ int mthca_register_device(struct mthca_dev *dev) dev->ib_dev.modify_srq = mthca_modify_srq; dev->ib_dev.query_srq = mthca_query_srq; dev->ib_dev.destroy_srq = mthca_destroy_srq; + dev->ib_dev.uverbs_cmd_mask |= + (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) | + (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) | + (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ); if (mthca_is_memfree(dev)) dev->ib_dev.post_srq_recv = mthca_arbel_post_srq_recv; diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h index 8de2887ba15..9a5bece3fa5 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.h +++ b/drivers/infiniband/hw/mthca/mthca_provider.h @@ -136,8 +136,8 @@ struct mthca_ah { * We have one global lock that protects dev->cq/qp_table. Each * struct mthca_cq/qp also has its own lock. An individual qp lock * may be taken inside of an individual cq lock. Both cqs attached to - * a qp may be locked, with the send cq locked first. No other - * nesting should be done. + * a qp may be locked, with the cq with the lower cqn locked first. + * No other nesting should be done. * * Each struct mthca_cq/qp also has an ref count, protected by the * corresponding table lock. The pointer from the cq/qp_table to the diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index cd8b6721ac9..2e8f6f36e0a 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -99,6 +99,10 @@ enum { MTHCA_QP_BIT_RSC = 1 << 3 }; +enum { + MTHCA_SEND_DOORBELL_FENCE = 1 << 5 +}; + struct mthca_qp_path { __be32 port_pkey; u8 rnr_retry; @@ -1259,6 +1263,32 @@ int mthca_alloc_qp(struct mthca_dev *dev, return 0; } +static void mthca_lock_cqs(struct mthca_cq *send_cq, struct mthca_cq *recv_cq) +{ + if (send_cq == recv_cq) + spin_lock_irq(&send_cq->lock); + else if (send_cq->cqn < recv_cq->cqn) { + spin_lock_irq(&send_cq->lock); + spin_lock_nested(&recv_cq->lock, SINGLE_DEPTH_NESTING); + } else { + spin_lock_irq(&recv_cq->lock); + spin_lock_nested(&send_cq->lock, SINGLE_DEPTH_NESTING); + } +} + +static void mthca_unlock_cqs(struct mthca_cq *send_cq, struct mthca_cq *recv_cq) +{ + if (send_cq == recv_cq) + spin_unlock_irq(&send_cq->lock); + else if (send_cq->cqn < recv_cq->cqn) { + spin_unlock(&recv_cq->lock); + spin_unlock_irq(&send_cq->lock); + } else { + spin_unlock(&send_cq->lock); + spin_unlock_irq(&recv_cq->lock); + } +} + int mthca_alloc_sqp(struct mthca_dev *dev, struct mthca_pd *pd, struct mthca_cq *send_cq, @@ -1311,17 +1341,13 @@ int mthca_alloc_sqp(struct mthca_dev *dev, * Lock CQs here, so that CQ polling code can do QP lookup * without taking a lock. */ - spin_lock_irq(&send_cq->lock); - if (send_cq != recv_cq) - spin_lock(&recv_cq->lock); + mthca_lock_cqs(send_cq, recv_cq); spin_lock(&dev->qp_table.lock); mthca_array_clear(&dev->qp_table.qp, mqpn); spin_unlock(&dev->qp_table.lock); - if (send_cq != recv_cq) - spin_unlock(&recv_cq->lock); - spin_unlock_irq(&send_cq->lock); + mthca_unlock_cqs(send_cq, recv_cq); err_out: dma_free_coherent(&dev->pdev->dev, sqp->header_buf_size, @@ -1355,9 +1381,7 @@ void mthca_free_qp(struct mthca_dev *dev, * Lock CQs here, so that CQ polling code can do QP lookup * without taking a lock. */ - spin_lock_irq(&send_cq->lock); - if (send_cq != recv_cq) - spin_lock(&recv_cq->lock); + mthca_lock_cqs(send_cq, recv_cq); spin_lock(&dev->qp_table.lock); mthca_array_clear(&dev->qp_table.qp, @@ -1365,9 +1389,7 @@ void mthca_free_qp(struct mthca_dev *dev, --qp->refcount; spin_unlock(&dev->qp_table.lock); - if (send_cq != recv_cq) - spin_unlock(&recv_cq->lock); - spin_unlock_irq(&send_cq->lock); + mthca_unlock_cqs(send_cq, recv_cq); wait_event(qp->wait, !get_qp_refcount(dev, qp)); @@ -1502,7 +1524,7 @@ int mthca_tavor_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, int i; int size; int size0 = 0; - u32 f0 = 0; + u32 f0; int ind; u8 op0 = 0; @@ -1686,6 +1708,8 @@ int mthca_tavor_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, if (!size0) { size0 = size; op0 = mthca_opcode[wr->opcode]; + f0 = wr->send_flags & IB_SEND_FENCE ? + MTHCA_SEND_DOORBELL_FENCE : 0; } ++ind; @@ -1843,7 +1867,7 @@ int mthca_arbel_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, int i; int size; int size0 = 0; - u32 f0 = 0; + u32 f0; int ind; u8 op0 = 0; @@ -2051,6 +2075,8 @@ int mthca_arbel_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, if (!size0) { size0 = size; op0 = mthca_opcode[wr->opcode]; + f0 = wr->send_flags & IB_SEND_FENCE ? + MTHCA_SEND_DOORBELL_FENCE : 0; } ++ind; diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 6bfa0cf4b1d..a86afd0a5ef 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -498,7 +498,7 @@ static int atkbd_set_repeat_rate(struct atkbd *atkbd) i++; dev->rep[REP_PERIOD] = period[i]; - while (j < ARRAY_SIZE(period) - 1 && delay[j] < dev->rep[REP_DELAY]) + while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY]) j++; dev->rep[REP_DELAY] = delay[j]; diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index a8efc1af36c..de0f46dd969 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -259,11 +259,11 @@ static int __init dmi_matched(struct dmi_system_id *dmi) return 1; } -static struct key_entry keymap_empty[] __initdata = { +static struct key_entry keymap_empty[] = { { KE_END, 0 } }; -static struct key_entry keymap_fs_amilo_pro_v2000[] __initdata = { +static struct key_entry keymap_fs_amilo_pro_v2000[] = { { KE_KEY, 0x01, KEY_HELP }, { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, @@ -273,7 +273,7 @@ static struct key_entry keymap_fs_amilo_pro_v2000[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_fujitsu_n3510[] __initdata = { +static struct key_entry keymap_fujitsu_n3510[] = { { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, { KE_KEY, 0x36, KEY_WWW }, @@ -285,7 +285,7 @@ static struct key_entry keymap_fujitsu_n3510[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_wistron_ms2111[] __initdata = { +static struct key_entry keymap_wistron_ms2111[] = { { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, { KE_KEY, 0x13, KEY_PROG3 }, @@ -294,7 +294,7 @@ static struct key_entry keymap_wistron_ms2111[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_wistron_ms2141[] __initdata = { +static struct key_entry keymap_wistron_ms2141[] = { { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, { KE_WIFI, 0x30, 0 }, @@ -307,7 +307,7 @@ static struct key_entry keymap_wistron_ms2141[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_acer_aspire_1500[] __initdata = { +static struct key_entry keymap_acer_aspire_1500[] = { { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, { KE_WIFI, 0x30, 0 }, @@ -317,7 +317,7 @@ static struct key_entry keymap_acer_aspire_1500[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_acer_travelmate_240[] __initdata = { +static struct key_entry keymap_acer_travelmate_240[] = { { KE_KEY, 0x31, KEY_MAIL }, { KE_KEY, 0x36, KEY_WWW }, { KE_KEY, 0x11, KEY_PROG1 }, @@ -327,7 +327,7 @@ static struct key_entry keymap_acer_travelmate_240[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_aopen_1559as[] __initdata = { +static struct key_entry keymap_aopen_1559as[] = { { KE_KEY, 0x01, KEY_HELP }, { KE_KEY, 0x06, KEY_PROG3 }, { KE_KEY, 0x11, KEY_PROG1 }, diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 8bc9f51ae6c..343afa38f4c 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -485,13 +485,6 @@ static int im_explorer_detect(struct psmouse *psmouse, int set_properties) param[0] = 40; ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); - param[0] = 200; - ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); - param[0] = 200; - ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); - param[0] = 60; - ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); - if (set_properties) { set_bit(BTN_MIDDLE, psmouse->dev->keybit); set_bit(REL_WHEEL, psmouse->dev->relbit); diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 3c148eaf2f4..8a60f391ffc 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -76,7 +76,7 @@ config HOTPLUG_PCI_IBM config HOTPLUG_PCI_ACPI tristate "ACPI PCI Hotplug driver" - depends on ACPI_DOCK && HOTPLUG_PCI + depends on (!ACPI_DOCK && ACPI && HOTPLUG_PCI) || (ACPI_DOCK && HOTPLUG_PCI) help Say Y here if you have a system that supports PCI Hotplug using ACPI. diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index fb08bc951ac..04618d4d7d7 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1518,6 +1518,63 @@ static void __devinit quirk_netmos(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); +static void __devinit quirk_e100_interrupt(struct pci_dev *dev) +{ + u16 command; + u32 bar; + u8 __iomem *csr; + u8 cmd_hi; + + switch (dev->device) { + /* PCI IDs taken from drivers/net/e100.c */ + case 0x1029: + case 0x1030 ... 0x1034: + case 0x1038 ... 0x103E: + case 0x1050 ... 0x1057: + case 0x1059: + case 0x1064 ... 0x106B: + case 0x1091 ... 0x1095: + case 0x1209: + case 0x1229: + case 0x2449: + case 0x2459: + case 0x245D: + case 0x27DC: + break; + default: + return; + } + + /* + * Some firmware hands off the e100 with interrupts enabled, + * which can cause a flood of interrupts if packets are + * received before the driver attaches to the device. So + * disable all e100 interrupts here. The driver will + * re-enable them when it's ready. + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar); + + if (!(command & PCI_COMMAND_MEMORY) || !bar) + return; + + csr = ioremap(bar, 8); + if (!csr) { + printk(KERN_WARNING "PCI: Can't map %s e100 registers\n", + pci_name(dev)); + return; + } + + cmd_hi = readb(csr + 3); + if (cmd_hi == 0) { + printk(KERN_WARNING "PCI: Firmware left %s e100 interrupts " + "enabled, disabling\n", pci_name(dev)); + writeb(1, csr + 3); + } + + iounmap(csr); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); static void __devinit fixup_rev1_53c810(struct pci_dev* dev) { diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c index 98bd22714d0..5630868c1b2 100644 --- a/drivers/scsi/esp.c +++ b/drivers/scsi/esp.c @@ -1146,7 +1146,7 @@ static struct sbus_dev sun4_esp_dev; static int __init esp_sun4_probe(struct scsi_host_template *tpnt) { if (sun4_esp_physaddr) { - memset(&sun4_esp_dev, 0, sizeof(esp_dev)); + memset(&sun4_esp_dev, 0, sizeof(sun4_esp_dev)); sun4_esp_dev.reg_addrs[0].phys_addr = sun4_esp_physaddr; sun4_esp_dev.irqs[0] = 4; sun4_esp_dev.resource[0].start = sun4_esp_physaddr; @@ -1162,6 +1162,7 @@ static int __init esp_sun4_probe(struct scsi_host_template *tpnt) static int __devexit esp_sun4_remove(void) { + struct of_device *dev = &sun4_esp_dev.ofdev; struct esp *esp = dev_get_drvdata(&dev->dev); return esp_remove_common(esp); diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index dc673e1b6fd..cfe20f73043 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -886,6 +886,15 @@ static int sunsab_console_setup(struct console *con, char *options) unsigned long flags; unsigned int baud, quot; + /* + * The console framework calls us for each and every port + * registered. Defer the console setup until the requested + * port has been properly discovered. A bit of a hack, + * though... + */ + if (up->port.type != PORT_SUNSAB) + return -1; + printk("Console: ttyS%d (SAB82532)\n", (sunsab_reg.minor - 64) + con->index); diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 47bc3d57e01..d34f336d53d 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1146,6 +1146,9 @@ static int __init sunzilog_console_setup(struct console *con, char *options) unsigned long flags; int baud, brg; + if (up->port.type != PORT_SUNZILOG) + return -1; + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", (sunzilog_reg.minor - 64) + con->index, con->index); diff --git a/fs/ioprio.c b/fs/ioprio.c index 93aa5715f22..78b1deae3fa 100644 --- a/fs/ioprio.c +++ b/fs/ioprio.c @@ -44,6 +44,9 @@ static int set_task_ioprio(struct task_struct *task, int ioprio) task->ioprio = ioprio; ioc = task->io_context; + /* see wmb() in current_io_context() */ + smp_read_barrier_depends(); + if (ioc && ioc->set_ioprio) ioc->set_ioprio(ioc, ioprio); @@ -111,9 +114,9 @@ asmlinkage long sys_ioprio_set(int which, int who, int ioprio) continue; ret = set_task_ioprio(p, ioprio); if (ret) - break; + goto free_uid; } while_each_thread(g, p); - +free_uid: if (who) free_uid(user); break; @@ -137,6 +140,29 @@ out: return ret; } +int ioprio_best(unsigned short aprio, unsigned short bprio) +{ + unsigned short aclass = IOPRIO_PRIO_CLASS(aprio); + unsigned short bclass = IOPRIO_PRIO_CLASS(bprio); + + if (!ioprio_valid(aprio)) + return bprio; + if (!ioprio_valid(bprio)) + return aprio; + + if (aclass == IOPRIO_CLASS_NONE) + aclass = IOPRIO_CLASS_BE; + if (bclass == IOPRIO_CLASS_NONE) + bclass = IOPRIO_CLASS_BE; + + if (aclass == bclass) + return min(aprio, bprio); + if (aclass > bclass) + return bprio; + else + return aprio; +} + asmlinkage long sys_ioprio_get(int which, int who) { struct task_struct *g, *p; diff --git a/fs/udf/super.c b/fs/udf/super.c index 7de172efa08..fcce1a21a51 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -1659,7 +1659,7 @@ static int udf_fill_super(struct super_block *sb, void *options, int silent) iput(inode); goto error_out; } - sb->s_maxbytes = MAX_LFS_FILESIZE; + sb->s_maxbytes = 1<<30; return 0; error_out: diff --git a/fs/udf/truncate.c b/fs/udf/truncate.c index e1b0e8cfecb..0abd66ce36e 100644 --- a/fs/udf/truncate.c +++ b/fs/udf/truncate.c @@ -239,37 +239,51 @@ void udf_truncate_extents(struct inode * inode) { if (offset) { - extoffset -= adsize; - etype = udf_next_aext(inode, &bloc, &extoffset, &eloc, &elen, &bh, 1); - if (etype == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30)) - { - extoffset -= adsize; - elen = EXT_NOT_RECORDED_NOT_ALLOCATED | (elen + offset); - udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 0); + /* + * OK, there is not extent covering inode->i_size and + * no extent above inode->i_size => truncate is + * extending the file by 'offset'. + */ + if ((!bh && extoffset == udf_file_entry_alloc_offset(inode)) || + (bh && extoffset == sizeof(struct allocExtDesc))) { + /* File has no extents at all! */ + memset(&eloc, 0x00, sizeof(kernel_lb_addr)); + elen = EXT_NOT_RECORDED_NOT_ALLOCATED | offset; + udf_add_aext(inode, &bloc, &extoffset, eloc, elen, &bh, 1); } - else if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30)) - { - kernel_lb_addr neloc = { 0, 0 }; + else { extoffset -= adsize; - nelen = EXT_NOT_RECORDED_NOT_ALLOCATED | - ((elen + offset + inode->i_sb->s_blocksize - 1) & - ~(inode->i_sb->s_blocksize - 1)); - udf_write_aext(inode, bloc, &extoffset, neloc, nelen, bh, 1); - udf_add_aext(inode, &bloc, &extoffset, eloc, (etype << 30) | elen, &bh, 1); - } - else - { - if (elen & (inode->i_sb->s_blocksize - 1)) + etype = udf_next_aext(inode, &bloc, &extoffset, &eloc, &elen, &bh, 1); + if (etype == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30)) + { + extoffset -= adsize; + elen = EXT_NOT_RECORDED_NOT_ALLOCATED | (elen + offset); + udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 0); + } + else if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30)) { + kernel_lb_addr neloc = { 0, 0 }; extoffset -= adsize; - elen = EXT_RECORDED_ALLOCATED | - ((elen + inode->i_sb->s_blocksize - 1) & + nelen = EXT_NOT_RECORDED_NOT_ALLOCATED | + ((elen + offset + inode->i_sb->s_blocksize - 1) & ~(inode->i_sb->s_blocksize - 1)); - udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 1); + udf_write_aext(inode, bloc, &extoffset, neloc, nelen, bh, 1); + udf_add_aext(inode, &bloc, &extoffset, eloc, (etype << 30) | elen, &bh, 1); + } + else + { + if (elen & (inode->i_sb->s_blocksize - 1)) + { + extoffset -= adsize; + elen = EXT_RECORDED_ALLOCATED | + ((elen + inode->i_sb->s_blocksize - 1) & + ~(inode->i_sb->s_blocksize - 1)); + udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 1); + } + memset(&eloc, 0x00, sizeof(kernel_lb_addr)); + elen = EXT_NOT_RECORDED_NOT_ALLOCATED | offset; + udf_add_aext(inode, &bloc, &extoffset, eloc, elen, &bh, 1); } - memset(&eloc, 0x00, sizeof(kernel_lb_addr)); - elen = EXT_NOT_RECORDED_NOT_ALLOCATED | offset; - udf_add_aext(inode, &bloc, &extoffset, eloc, elen, &bh, 1); } } } diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index 72964f9b841..7463fd5252c 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -104,6 +104,7 @@ enum s3c2410_chan_op_e { S3C2410_DMAOP_RESUME, S3C2410_DMAOP_FLUSH, S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ + S3C2410_DMAOP_STARTED, /* indicate channel started */ }; typedef enum s3c2410_chan_op_e s3c2410_chan_op_t; diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h index edb7b6502fc..91a31adfa8a 100644 --- a/include/asm-arm/procinfo.h +++ b/include/asm-arm/procinfo.h @@ -55,5 +55,6 @@ extern unsigned int elf_hwcap; #define HWCAP_VFP 64 #define HWCAP_EDSP 128 #define HWCAP_JAVA 256 +#define HWCAP_IWMMXT 512 #endif diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h index 9f0917c6865..ae63db7b3e7 100644 --- a/include/asm-powerpc/pgalloc.h +++ b/include/asm-powerpc/pgalloc.h @@ -117,7 +117,7 @@ static inline void pte_free(struct page *ptepage) pte_free_kernel(page_address(ptepage)); } -#define PGF_CACHENUM_MASK 0xf +#define PGF_CACHENUM_MASK 0x3 typedef struct pgtable_free { unsigned long val; diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 7307aa77567..4c9f5229e83 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -53,6 +53,15 @@ #define smp_read_barrier_depends() do { } while(0) #endif /* CONFIG_SMP */ +/* + * This is a barrier which prevents following instructions from being + * started until the value of the argument x is known. For example, if + * x is a variable loaded from memory, this prevents following + * instructions from being executed until the load has been performed. + */ +#define data_barrier(x) \ + asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory"); + struct task_struct; struct pt_regs; diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h index c4c278d72f7..2c702d35a7c 100644 --- a/include/asm-powerpc/tsi108.h +++ b/include/asm-powerpc/tsi108.h @@ -1,16 +1,18 @@ /* - * include/asm-ppc/tsi108.h - * * common routine and memory layout for Tundra TSI108(Grendel) host bridge * memory controller. * * Author: Jacob Pan (jacob.pan@freescale.com) * Alex Bounine (alexandreb@tundra.com) - * 2004 (c) Freescale Semiconductor Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * + * Copyright 2004-2006 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. */ + #ifndef __PPC_KERNEL_TSI108_H #define __PPC_KERNEL_TSI108_H diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h new file mode 100644 index 00000000000..3e4d04effa5 --- /dev/null +++ b/include/asm-powerpc/tsi108_irq.h @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2005 Tundra Semiconductor Corp. + * Alex Bounine, <alexandreb at tundra.com). + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * definitions for interrupt controller initialization and external interrupt + * demultiplexing on TSI108EMU/SVB boards. + */ + +#ifndef _ASM_PPC_TSI108_IRQ_H +#define _ASM_PPC_TSI108_IRQ_H + +/* + * Tsi108 interrupts + */ +#ifndef TSI108_IRQ_REG_BASE +#define TSI108_IRQ_REG_BASE 0 +#endif + +#define TSI108_IRQ(x) (TSI108_IRQ_REG_BASE + (x)) + +#define TSI108_MAX_VECTORS (36 + 4) /* 36 sources + PCI INT demux */ +#define MAX_TASK_PRIO 0xF + +#define TSI108_IRQ_SPURIOUS (TSI108_MAX_VECTORS) + +#define DEFAULT_PRIO_LVL 10 /* initial priority level */ + +/* Interrupt vectors assignment to external and internal + * sources of requests. */ + +/* EXTERNAL INTERRUPT SOURCES */ + +#define IRQ_TSI108_EXT_INT0 TSI108_IRQ(0) /* External Source at INT[0] */ +#define IRQ_TSI108_EXT_INT1 TSI108_IRQ(1) /* External Source at INT[1] */ +#define IRQ_TSI108_EXT_INT2 TSI108_IRQ(2) /* External Source at INT[2] */ +#define IRQ_TSI108_EXT_INT3 TSI108_IRQ(3) /* External Source at INT[3] */ + +/* INTERNAL INTERRUPT SOURCES */ + +#define IRQ_TSI108_RESERVED0 TSI108_IRQ(4) /* Reserved IRQ */ +#define IRQ_TSI108_RESERVED1 TSI108_IRQ(5) /* Reserved IRQ */ +#define IRQ_TSI108_RESERVED2 TSI108_IRQ(6) /* Reserved IRQ */ +#define IRQ_TSI108_RESERVED3 TSI108_IRQ(7) /* Reserved IRQ */ +#define IRQ_TSI108_DMA0 TSI108_IRQ(8) /* DMA0 */ +#define IRQ_TSI108_DMA1 TSI108_IRQ(9) /* DMA1 */ +#define IRQ_TSI108_DMA2 TSI108_IRQ(10) /* DMA2 */ +#define IRQ_TSI108_DMA3 TSI108_IRQ(11) /* DMA3 */ +#define IRQ_TSI108_UART0 TSI108_IRQ(12) /* UART0 */ +#define IRQ_TSI108_UART1 TSI108_IRQ(13) /* UART1 */ +#define IRQ_TSI108_I2C TSI108_IRQ(14) /* I2C */ +#define IRQ_TSI108_GPIO TSI108_IRQ(15) /* GPIO */ +#define IRQ_TSI108_GIGE0 TSI108_IRQ(16) /* GIGE0 */ +#define IRQ_TSI108_GIGE1 TSI108_IRQ(17) /* GIGE1 */ +#define IRQ_TSI108_RESERVED4 TSI108_IRQ(18) /* Reserved IRQ */ +#define IRQ_TSI108_HLP TSI108_IRQ(19) /* HLP */ +#define IRQ_TSI108_SDRAM TSI108_IRQ(20) /* SDC */ +#define IRQ_TSI108_PROC_IF TSI108_IRQ(21) /* Processor IF */ +#define IRQ_TSI108_RESERVED5 TSI108_IRQ(22) /* Reserved IRQ */ +#define IRQ_TSI108_PCI TSI108_IRQ(23) /* PCI/X block */ + +#define IRQ_TSI108_MBOX0 TSI108_IRQ(24) /* Mailbox 0 register */ +#define IRQ_TSI108_MBOX1 TSI108_IRQ(25) /* Mailbox 1 register */ +#define IRQ_TSI108_MBOX2 TSI108_IRQ(26) /* Mailbox 2 register */ +#define IRQ_TSI108_MBOX3 TSI108_IRQ(27) /* Mailbox 3 register */ + +#define IRQ_TSI108_DBELL0 TSI108_IRQ(28) /* Doorbell 0 */ +#define IRQ_TSI108_DBELL1 TSI108_IRQ(29) /* Doorbell 1 */ +#define IRQ_TSI108_DBELL2 TSI108_IRQ(30) /* Doorbell 2 */ +#define IRQ_TSI108_DBELL3 TSI108_IRQ(31) /* Doorbell 3 */ + +#define IRQ_TSI108_TIMER0 TSI108_IRQ(32) /* Global Timer 0 */ +#define IRQ_TSI108_TIMER1 TSI108_IRQ(33) /* Global Timer 1 */ +#define IRQ_TSI108_TIMER2 TSI108_IRQ(34) /* Global Timer 2 */ +#define IRQ_TSI108_TIMER3 TSI108_IRQ(35) /* Global Timer 3 */ + +/* + * PCI bus INTA# - INTD# lines demultiplexor + */ +#define IRQ_PCI_INTAD_BASE TSI108_IRQ(36) +#define IRQ_PCI_INTA (IRQ_PCI_INTAD_BASE + 0) +#define IRQ_PCI_INTB (IRQ_PCI_INTAD_BASE + 1) +#define IRQ_PCI_INTC (IRQ_PCI_INTAD_BASE + 2) +#define IRQ_PCI_INTD (IRQ_PCI_INTAD_BASE + 3) +#define NUM_PCI_IRQS (4) + +/* number of entries in vector dispatch table */ +#define IRQ_TSI108_TAB_SIZE (TSI108_MAX_VECTORS + 1) + +/* Mapping of MPIC outputs to processors' interrupt pins */ + +#define IDIR_INT_OUT0 0x1 +#define IDIR_INT_OUT1 0x2 +#define IDIR_INT_OUT2 0x4 +#define IDIR_INT_OUT3 0x8 + +/*--------------------------------------------------------------- + * IRQ line configuration parameters */ + +/* Interrupt delivery modes */ +typedef enum { + TSI108_IRQ_DIRECTED, + TSI108_IRQ_DISTRIBUTED, +} TSI108_IRQ_MODE; +#endif /* _ASM_PPC_TSI108_IRQ_H */ diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h index 1ba19eb34ce..ebfe395cfb8 100644 --- a/include/asm-sparc64/pgtable.h +++ b/include/asm-sparc64/pgtable.h @@ -234,7 +234,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot) sz_bits = 0UL; if (_PAGE_SZBITS_4U != 0UL || _PAGE_SZBITS_4V != 0UL) { __asm__ __volatile__( - "\n661: sethi %uhi(%1), %0\n" + "\n661: sethi %%uhi(%1), %0\n" " sllx %0, 32, %0\n" " .section .sun4v_2insn_patch, \"ax\"\n" " .word 661b\n" diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h index 88d5961f7a3..8e2042b9d47 100644 --- a/include/linux/ioprio.h +++ b/include/linux/ioprio.h @@ -59,27 +59,6 @@ static inline int task_nice_ioprio(struct task_struct *task) /* * For inheritance, return the highest of the two given priorities */ -static inline int ioprio_best(unsigned short aprio, unsigned short bprio) -{ - unsigned short aclass = IOPRIO_PRIO_CLASS(aprio); - unsigned short bclass = IOPRIO_PRIO_CLASS(bprio); - - if (!ioprio_valid(aprio)) - return bprio; - if (!ioprio_valid(bprio)) - return aprio; - - if (aclass == IOPRIO_CLASS_NONE) - aclass = IOPRIO_CLASS_BE; - if (bclass == IOPRIO_CLASS_NONE) - bclass = IOPRIO_CLASS_BE; - - if (aclass == bclass) - return min(aprio, bprio); - if (aclass > bclass) - return bprio; - else - return aprio; -} +extern int ioprio_best(unsigned short aprio, unsigned short bprio); #endif diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index a9663b49ea5..92eae0e0f3f 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -404,19 +404,6 @@ static inline int sctp_list_single_entry(struct list_head *head) return ((head->next != head) && (head->next == head->prev)); } -/* Calculate the size (in bytes) occupied by the data of an iovec. */ -static inline size_t get_user_iov_size(struct iovec *iov, int iovlen) -{ - size_t retval = 0; - - for (; iovlen > 0; --iovlen) { - retval += iov->iov_len; - iov++; - } - - return retval; -} - /* Generate a random jitter in the range of -50% ~ +50% of input RTO. */ static inline __s32 sctp_jitter(__u32 rto) { diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h index 1eac3d0eb7a..de313de4fef 100644 --- a/include/net/sctp/sm.h +++ b/include/net/sctp/sm.h @@ -221,8 +221,7 @@ struct sctp_chunk *sctp_make_abort_no_data(const struct sctp_association *, const struct sctp_chunk *, __u32 tsn); struct sctp_chunk *sctp_make_abort_user(const struct sctp_association *, - const struct sctp_chunk *, - const struct msghdr *); + const struct msghdr *, size_t msg_len); struct sctp_chunk *sctp_make_abort_violation(const struct sctp_association *, const struct sctp_chunk *, const __u8 *, diff --git a/lib/ts_bm.c b/lib/ts_bm.c index 0110e441480..d90822c378a 100644 --- a/lib/ts_bm.c +++ b/lib/ts_bm.c @@ -111,15 +111,14 @@ static int subpattern(u8 *pattern, int i, int j, int g) return ret; } -static void compute_prefix_tbl(struct ts_bm *bm, const u8 *pattern, - unsigned int len) +static void compute_prefix_tbl(struct ts_bm *bm) { int i, j, g; for (i = 0; i < ASIZE; i++) - bm->bad_shift[i] = len; - for (i = 0; i < len - 1; i++) - bm->bad_shift[pattern[i]] = len - 1 - i; + bm->bad_shift[i] = bm->patlen; + for (i = 0; i < bm->patlen - 1; i++) + bm->bad_shift[bm->pattern[i]] = bm->patlen - 1 - i; /* Compute the good shift array, used to match reocurrences * of a subpattern */ @@ -150,8 +149,8 @@ static struct ts_config *bm_init(const void *pattern, unsigned int len, bm = ts_config_priv(conf); bm->patlen = len; bm->pattern = (u8 *) bm->good_shift + prefix_tbl_len; - compute_prefix_tbl(bm, pattern, len); memcpy(bm->pattern, pattern, len); + compute_prefix_tbl(bm); return conf; } diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c index df4854cf598..8d1d7a6e72a 100644 --- a/net/ipv4/netfilter/arp_tables.c +++ b/net/ipv4/netfilter/arp_tables.c @@ -236,7 +236,7 @@ unsigned int arpt_do_table(struct sk_buff **pskb, struct arpt_entry *e, *back; const char *indev, *outdev; void *table_base; - struct xt_table_info *private = table->private; + struct xt_table_info *private; /* ARP header, plus 2 device addresses, plus 2 IP addresses. */ if (!pskb_may_pull((*pskb), (sizeof(struct arphdr) + @@ -248,6 +248,7 @@ unsigned int arpt_do_table(struct sk_buff **pskb, outdev = out ? out->name : nulldevname; read_lock_bh(&table->lock); + private = table->private; table_base = (void *)private->entries[smp_processor_id()]; e = get_entry(table_base, private->hook_entry[hook]); back = get_entry(table_base, private->underflow[hook]); diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 507adefbc17..b4f3ffe1b3b 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -201,6 +201,7 @@ void tcp_select_initial_window(int __space, __u32 mss, * See RFC1323 for an explanation of the limit to 14 */ space = max_t(u32, sysctl_tcp_rmem[2], sysctl_rmem_max); + space = min_t(u32, space, *window_clamp); while (space > 65535 && (*rcv_wscale) < 14) { space >>= 1; (*rcv_wscale)++; diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 4f11f585820..17b509282cf 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -806,38 +806,26 @@ no_mem: /* Helper to create ABORT with a SCTP_ERROR_USER_ABORT error. */ struct sctp_chunk *sctp_make_abort_user(const struct sctp_association *asoc, - const struct sctp_chunk *chunk, - const struct msghdr *msg) + const struct msghdr *msg, + size_t paylen) { struct sctp_chunk *retval; - void *payload = NULL, *payoff; - size_t paylen = 0; - struct iovec *iov = NULL; - int iovlen = 0; - - if (msg) { - iov = msg->msg_iov; - iovlen = msg->msg_iovlen; - paylen = get_user_iov_size(iov, iovlen); - } + void *payload = NULL; + int err; - retval = sctp_make_abort(asoc, chunk, sizeof(sctp_errhdr_t) + paylen); + retval = sctp_make_abort(asoc, NULL, sizeof(sctp_errhdr_t) + paylen); if (!retval) goto err_chunk; if (paylen) { /* Put the msg_iov together into payload. */ - payload = kmalloc(paylen, GFP_ATOMIC); + payload = kmalloc(paylen, GFP_KERNEL); if (!payload) goto err_payload; - payoff = payload; - for (; iovlen > 0; --iovlen) { - if (copy_from_user(payoff, iov->iov_base,iov->iov_len)) - goto err_copy; - payoff += iov->iov_len; - iov++; - } + err = memcpy_fromiovec(payload, msg->msg_iov, paylen); + if (err < 0) + goto err_copy; } sctp_init_cause(retval, SCTP_ERROR_USER_ABORT, payload, paylen); diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index ead3f1b0ea3..5b5ae795832 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -4031,18 +4031,12 @@ sctp_disposition_t sctp_sf_do_9_1_prm_abort( * from its upper layer, but retransmits data to the far end * if necessary to fill gaps. */ - struct msghdr *msg = arg; - struct sctp_chunk *abort; + struct sctp_chunk *abort = arg; sctp_disposition_t retval; retval = SCTP_DISPOSITION_CONSUME; - /* Generate ABORT chunk to send the peer. */ - abort = sctp_make_abort_user(asoc, NULL, msg); - if (!abort) - retval = SCTP_DISPOSITION_NOMEM; - else - sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); + sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); /* Even if we can't send the ABORT due to low memory delete the * TCB. This is a departure from our typical NOMEM handling. @@ -4166,8 +4160,7 @@ sctp_disposition_t sctp_sf_cookie_wait_prm_abort( void *arg, sctp_cmd_seq_t *commands) { - struct msghdr *msg = arg; - struct sctp_chunk *abort; + struct sctp_chunk *abort = arg; sctp_disposition_t retval; /* Stop T1-init timer */ @@ -4175,12 +4168,7 @@ sctp_disposition_t sctp_sf_cookie_wait_prm_abort( SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT)); retval = SCTP_DISPOSITION_CONSUME; - /* Generate ABORT chunk to send the peer */ - abort = sctp_make_abort_user(asoc, NULL, msg); - if (!abort) - retval = SCTP_DISPOSITION_NOMEM; - else - sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); + sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE, SCTP_STATE(SCTP_STATE_CLOSED)); diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 54722e622e6..fde3f55bfd4 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1520,8 +1520,16 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, goto out_unlock; } if (sinfo_flags & SCTP_ABORT) { + struct sctp_chunk *chunk; + + chunk = sctp_make_abort_user(asoc, msg, msg_len); + if (!chunk) { + err = -ENOMEM; + goto out_unlock; + } + SCTP_DEBUG_PRINTK("Aborting association: %p\n", asoc); - sctp_primitive_ABORT(asoc, msg); + sctp_primitive_ABORT(asoc, chunk); err = 0; goto out_unlock; } |