diff options
24 files changed, 1620 insertions, 257 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 56a2f678019..8619861dd34 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2503,13 +2503,11 @@ W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org S: Maintained -LINUX FOR POWERPC EMBEDDED MPC52XX +LINUX FOR POWERPC EMBEDDED MPC5XXX P: Sylvain Munaut M: tnt@246tNt.com P: Grant Likely M: grant.likely@secretlab.ca -W: http://www.246tNt.com/mpc52xx/ -W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org S: Maintained @@ -1,3 +1,4 @@ +FRED=42 VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index 94ad7b2b241..1f9036c317b 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -1,7 +1,7 @@ /* - * MPC5121E MDS Device Tree Source + * MPC5121E ADS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007,2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -17,6 +17,10 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + pci = &pci; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -39,8 +43,41 @@ reg = <0x00000000 0x10000000>; // 256MB at 0 }; + mbx@20000000 { + compatible = "fsl,mpc5121-mbx"; + reg = <0x20000000 0x4000>; + interrupts = <66 0x8>; + interrupt-parent = < &ipic >; + }; + + sram@30000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x30000000 0x20000>; // 128K at 0x30000000 + }; + + nfc@40000000 { + compatible = "fsl,mpc5121-nfc"; + reg = <0x40000000 0x100000>; // 1M at 0x40000000 + interrupts = <6 8>; + interrupt-parent = < &ipic >; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <1>; + // ADS has two Hynix 512MB Nand flash chips in a single + // stacked package . + chips = <2>; + nand0@0 { + label = "nand0"; + reg = <0x00000000 0x02000000>; // first 32 MB of chip 0 + }; + nand1@20000000 { + label = "nand1"; + reg = <0x20000000 0x02000000>; // first 32 MB of chip 1 + }; + }; + localbus@80000020 { - compatible = "fsl,mpc5121ads-localbus"; + compatible = "fsl,mpc5121-localbus"; #address-cells = <2>; #size-cells = <1>; reg = <0x80000020 0x40>; @@ -51,14 +88,51 @@ flash@0,0 { compatible = "cfi-flash"; reg = <0 0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; bank-width = <4>; - device-width = <1>; + device-width = <2>; + protected@0 { + label = "protected"; + reg = <0x00000000 0x00040000>; // first sector is protected + read-only; + }; + filesystem@40000 { + label = "filesystem"; + reg = <0x00040000 0x03c00000>; // 60M for filesystem + }; + kernel@3c40000 { + label = "kernel"; + reg = <0x03c40000 0x00280000>; // 2.5M for kernel + }; + device-tree@3ec0000 { + label = "device-tree"; + reg = <0x03ec0000 0x00040000>; // one sector for device tree + }; + u-boot@3f00000 { + label = "u-boot"; + reg = <0x03f00000 0x00100000>; // 1M for u-boot + read-only; + }; }; board-control@2,0 { compatible = "fsl,mpc5121ads-cpld"; reg = <0x2 0x0 0x8000>; }; + + cpld_pic: pic@2,a { + compatible = "fsl,mpc5121ads-cpld-pic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2 0xa 0x5>; + interrupt-parent = < &ipic >; + // irq routing + // all irqs but touch screen are routed to irq0 (ipic 48) + // touch screen is statically routed to irq1 (ipic 17) + // so don't use it here + interrupts = <48 0x8>; + }; }; soc@80000000 { @@ -85,38 +159,252 @@ reg = <0xc00 0x100>; }; - // 512x PSCs are not 52xx PSCs compatible + rtc@a00 { // Real time clock + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + interrupt-parent = < &ipic >; + }; + + clock@f00 { // Clock control + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + }; + + pmc@1000{ //Power Management Controller + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x2>; + interrupt-parent = < &ipic >; + }; + + gpio@1100 { + compatible = "fsl,mpc5121-gpio"; + reg = <0x1100 0x100>; + interrupts = <78 0x8>; + interrupt-parent = < &ipic >; + }; + + mscan@1300 { + compatible = "fsl,mpc5121-mscan"; + cell-index = <0>; + interrupts = <12 0x8>; + interrupt-parent = < &ipic >; + reg = <0x1300 0x80>; + }; + + mscan@1380 { + compatible = "fsl,mpc5121-mscan"; + cell-index = <1>; + interrupts = <13 0x8>; + interrupt-parent = < &ipic >; + reg = <0x1380 0x80>; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + cell-index = <0>; + reg = <0x1700 0x20>; + interrupts = <9 0x8>; + interrupt-parent = < &ipic >; + fsl5200-clocking; + }; + + i2c@1720 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + cell-index = <1>; + reg = <0x1720 0x20>; + interrupts = <10 0x8>; + interrupt-parent = < &ipic >; + fsl5200-clocking; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + cell-index = <2>; + reg = <0x1740 0x20>; + interrupts = <11 0x8>; + interrupt-parent = < &ipic >; + fsl5200-clocking; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + axe@2000 { + compatible = "fsl,mpc5121-axe"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + interrupt-parent = < &ipic >; + }; + + display@2100 { + compatible = "fsl,mpc5121-diu", "fsl-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + interrupt-parent = < &ipic >; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x800>; + #address-cells = <1>; + #size-cells = <0>; + phy: ethernet-phy@0 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@2800 { + device_type = "network"; + compatible = "fsl,mpc5121-fec"; + reg = <0x2800 0x800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + interrupt-parent = < &ipic >; + phy-handle = < &phy >; + fsl,align-tx-packets = <4>; + }; + + // 5121e has two dr usb modules + // mpc5121_ads only uses USB0 + + // USB1 using external ULPI PHY + //usb@3000 { + // compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr"; + // reg = <0x3000 0x1000>; + // #address-cells = <1>; + // #size-cells = <0>; + // interrupt-parent = < &ipic >; + // interrupts = <43 0x8>; + // dr_mode = "otg"; + // phy_type = "ulpi"; + // port1; + //}; + + // USB0 using internal UTMI PHY + usb@4000 { + compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr"; + reg = <0x4000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = < &ipic >; + interrupts = <44 0x8>; + dr_mode = "otg"; + phy_type = "utmi_wide"; + port0; + }; + + // IO control + ioctl@a000 { + compatible = "fsl,mpc5121-ioctl"; + reg = <0xA000 0x1000>; + }; + + pata@10200 { + compatible = "fsl,mpc5121-pata"; + reg = <0x10200 0x100>; + interrupts = <5 0x8>; + interrupt-parent = < &ipic >; + }; + + // 512x PSCs are not 52xx PSC compatible // PSC3 serial port A aka ttyPSC0 serial@11300 { device_type = "serial"; - compatible = "fsl,mpc5121-psc-uart"; + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; // Logical port assignment needed until driver // learns to use aliases port-number = <0>; cell-index = <3>; reg = <0x11300 0x100>; - interrupts = <0x28 0x8>; // actually the fifo irq + interrupts = <40 0x8>; interrupt-parent = < &ipic >; + rx-fifo-size = <16>; + tx-fifo-size = <16>; }; // PSC4 serial port B aka ttyPSC1 serial@11400 { device_type = "serial"; - compatible = "fsl,mpc5121-psc-uart"; + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; // Logical port assignment needed until driver // learns to use aliases port-number = <1>; cell-index = <4>; reg = <0x11400 0x100>; - interrupts = <0x28 0x8>; // actually the fifo irq + interrupts = <40 0x8>; interrupt-parent = < &ipic >; + rx-fifo-size = <16>; + tx-fifo-size = <16>; }; - pscsfifo@11f00 { + // PSC5 in ac97 mode + ac97@11500 { + compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc"; + cell-index = <5>; + reg = <0x11500 0x100>; + interrupts = <40 0x8>; + interrupt-parent = < &ipic >; + fsl,mode = "ac97-slave"; + rx-fifo-size = <384>; + tx-fifo-size = <384>; + }; + + pscfifo@11f00 { compatible = "fsl,mpc5121-psc-fifo"; reg = <0x11f00 0x100>; - interrupts = <0x28 0x8>; + interrupts = <40 0x8>; interrupt-parent = < &ipic >; }; + + dma@14000 { + compatible = "fsl,mpc5121-dma2"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + interrupt-parent = < &ipic >; + }; + + }; + + pci: pci@80008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + // IDSEL 0x15 - Slot 1 PCI + 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8 + 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8 + 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8 + 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8 + + // IDSEL 0x16 - Slot 2 MiniPCI + 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8 + 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8 + + // IDSEL 0x17 - Slot 3 MiniPCI + 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8 + 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8 + >; + interrupt-parent = < &ipic >; + interrupts = <1 0x8>; + bus-range = <0 0>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x80008500 0x100>; + compatible = "fsl,mpc5121-pci"; + device_type = "pci"; }; }; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index 773a68e0005..3008bf8830c 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -70,6 +70,20 @@ fsl,has-wdt; }; + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + interrupt-parent = <&mpc5200_pic>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + interrupt-parent = <&mpc5200_pic>; + reg = <0x980 0x80>; + }; + gpio@b00 { compatible = "fsl,mpc5200-gpio"; reg = <0xb00 0x40>; diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index 4c0da0c079e..c62f893ede1 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -2,18 +2,29 @@ config PPC_MPC512x bool select FSL_SOC select IPIC - default n + select PPC_CLOCK config PPC_MPC5121 bool select PPC_MPC512x - default n config MPC5121_ADS bool "Freescale MPC5121E ADS" depends on PPC_MULTIPLATFORM && PPC32 select DEFAULT_UIMAGE select PPC_MPC5121 + select MPC5121_ADS_CPLD help This option enables support for the MPC5121E ADS board. - default n + +config MPC5121_GENERIC + bool "Generic support for simple MPC5121 based boards" + depends on PPC_MULTIPLATFORM && PPC32 + select DEFAULT_UIMAGE + select PPC_MPC5121 + help + This option enables support for simple MPC5121 based boards + which do not need custom platform specific setup. + + Compatible boards include: Protonic LVT base boards (ZANMCU + and VICVT2). diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile index 232c89f2039..90be2f5717e 100644 --- a/arch/powerpc/platforms/512x/Makefile +++ b/arch/powerpc/platforms/512x/Makefile @@ -1,4 +1,6 @@ # # Makefile for the Freescale PowerPC 512x linux kernel. # -obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o +obj-y += clock.o mpc512x_shared.o +obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o +obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c new file mode 100644 index 00000000000..f416014ee72 --- /dev/null +++ b/arch/powerpc/platforms/512x/clock.c @@ -0,0 +1,729 @@ +/* + * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: John Rigby <jrigby@freescale.com> + * + * Implements the clk api defined in include/linux/clk.h + * + * Original based on linux/arch/arm/mach-integrator/clock.c + * + * Copyright (C) 2004 ARM Limited. + * Written by Deep Blue Solutions Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/io.h> + +#include <linux/of_platform.h> +#include <asm/mpc512x.h> +#include <asm/clk_interface.h> + +#undef CLK_DEBUG + +static int clocks_initialized; + +#define CLK_HAS_RATE 0x1 /* has rate in MHz */ +#define CLK_HAS_CTRL 0x2 /* has control reg and bit */ + +struct clk { + struct list_head node; + char name[32]; + int flags; + struct device *dev; + unsigned long rate; + struct module *owner; + void (*calc) (struct clk *); + struct clk *parent; + int reg, bit; /* CLK_HAS_CTRL */ + int div_shift; /* only used by generic_div_clk_calc */ +}; + +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); + +static struct clk *mpc5121_clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + int dev_match = 0; + int id_match = 0; + + if (dev == NULL && id == NULL) + return NULL; + + mutex_lock(&clocks_mutex); + list_for_each_entry(p, &clocks, node) { + if (dev && dev == p->dev) + dev_match++; + if (strcmp(id, p->name) == 0) + id_match++; + if ((dev_match || id_match) && try_module_get(p->owner)) { + clk = p; + break; + } + } + mutex_unlock(&clocks_mutex); + + return clk; +} + +#ifdef CLK_DEBUG +static void dump_clocks(void) +{ + struct clk *p; + + mutex_lock(&clocks_mutex); + printk(KERN_INFO "CLOCKS:\n"); + list_for_each_entry(p, &clocks, node) { + printk(KERN_INFO " %s %ld", p->name, p->rate); + if (p->parent) + printk(KERN_INFO " %s %ld", p->parent->name, + p->parent->rate); + if (p->flags & CLK_HAS_CTRL) + printk(KERN_INFO " reg/bit %d/%d", p->reg, p->bit); + printk("\n"); + } + mutex_unlock(&clocks_mutex); +} +#define DEBUG_CLK_DUMP() dump_clocks() +#else +#define DEBUG_CLK_DUMP() +#endif + + +static void mpc5121_clk_put(struct clk *clk) +{ + module_put(clk->owner); +} + +#define NRPSC 12 + +struct mpc512x_clockctl { + u32 spmr; /* System PLL Mode Reg */ + u32 sccr[2]; /* System Clk Ctrl Reg 1 & 2 */ + u32 scfr1; /* System Clk Freq Reg 1 */ + u32 scfr2; /* System Clk Freq Reg 2 */ + u32 reserved; + u32 bcr; /* Bread Crumb Reg */ + u32 pccr[NRPSC]; /* PSC Clk Ctrl Reg 0-11 */ + u32 spccr; /* SPDIF Clk Ctrl Reg */ + u32 cccr; /* CFM Clk Ctrl Reg */ + u32 dccr; /* DIU Clk Cnfg Reg */ +}; + +struct mpc512x_clockctl __iomem *clockctl; + +static int mpc5121_clk_enable(struct clk *clk) +{ + unsigned int mask; + + if (clk->flags & CLK_HAS_CTRL) { + mask = in_be32(&clockctl->sccr[clk->reg]); + mask |= 1 << clk->bit; + out_be32(&clockctl->sccr[clk->reg], mask); + } + return 0; +} + +static void mpc5121_clk_disable(struct clk *clk) +{ + unsigned int mask; + + if (clk->flags & CLK_HAS_CTRL) { + mask = in_be32(&clockctl->sccr[clk->reg]); + mask &= ~(1 << clk->bit); + out_be32(&clockctl->sccr[clk->reg], mask); + } +} + +static unsigned long mpc5121_clk_get_rate(struct clk *clk) +{ + if (clk->flags & CLK_HAS_RATE) + return clk->rate; + else + return 0; +} + +static long mpc5121_clk_round_rate(struct clk *clk, unsigned long rate) +{ + return rate; +} + +static int mpc5121_clk_set_rate(struct clk *clk, unsigned long rate) +{ + return 0; +} + +static int clk_register(struct clk *clk) +{ + mutex_lock(&clocks_mutex); + list_add(&clk->node, &clocks); + mutex_unlock(&clocks_mutex); + return 0; +} + +static unsigned long spmf_mult(void) +{ + /* + * Convert spmf to multiplier + */ + static int spmf_to_mult[] = { + 68, 1, 12, 16, + 20, 24, 28, 32, + 36, 40, 44, 48, + 52, 56, 60, 64 + }; + int spmf = (clockctl->spmr >> 24) & 0xf; + return spmf_to_mult[spmf]; +} + +static unsigned long sysdiv_div_x_2(void) +{ + /* + * Convert sysdiv to divisor x 2 + * Some divisors have fractional parts so + * multiply by 2 then divide by this value + */ + static int sysdiv_to_div_x_2[] = { + 4, 5, 6, 7, + 8, 9, 10, 14, + 12, 16, 18, 22, + 20, 24, 26, 30, + 28, 32, 34, 38, + 36, 40, 42, 46, + 44, 48, 50, 54, + 52, 56, 58, 62, + 60, 64, 66, + }; + int sysdiv = (clockctl->scfr2 >> 26) & 0x3f; + return sysdiv_to_div_x_2[sysdiv]; +} + +static unsigned long ref_to_sys(unsigned long rate) +{ + rate *= spmf_mult(); + rate *= 2; + rate /= sysdiv_div_x_2(); + + return rate; +} + +static unsigned long sys_to_ref(unsigned long rate) +{ + rate *= sysdiv_div_x_2(); + rate /= 2; + rate /= spmf_mult(); + + return rate; +} + +static long ips_to_ref(unsigned long rate) +{ + int ips_div = (clockctl->scfr1 >> 23) & 0x7; + + rate *= ips_div; /* csb_clk = ips_clk * ips_div */ + rate *= 2; /* sys_clk = csb_clk * 2 */ + return sys_to_ref(rate); +} + +static unsigned long devtree_getfreq(char *clockname) +{ + struct device_node *np; + const unsigned int *prop; + unsigned int val = 0; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr"); + if (np) { + prop = of_get_property(np, clockname, NULL); + if (prop) + val = *prop; + of_node_put(np); + } + return val; +} + +static void ref_clk_calc(struct clk *clk) +{ + unsigned long rate; + + rate = devtree_getfreq("bus-frequency"); + if (rate == 0) { + printk(KERN_ERR "No bus-frequency in dev tree\n"); + clk->rate = 0; + return; + } + clk->rate = ips_to_ref(rate); +} + +static struct clk ref_clk = { + .name = "ref_clk", + .calc = ref_clk_calc, +}; + + +static void sys_clk_calc(struct clk *clk) +{ + clk->rate = ref_to_sys(ref_clk.rate); +} + +static struct clk sys_clk = { + .name = "sys_clk", + .calc = sys_clk_calc, +}; + +static void diu_clk_calc(struct clk *clk) +{ + int diudiv_x_2 = clockctl->scfr1 & 0xff; + unsigned long rate; + + rate = sys_clk.rate; + + rate *= 2; + rate /= diudiv_x_2; + + clk->rate = rate; +} + +static void half_clk_calc(struct clk *clk) +{ + clk->rate = clk->parent->rate / 2; +} + +static void generic_div_clk_calc(struct clk *clk) +{ + int div = (clockctl->scfr1 >> clk->div_shift) & 0x7; + + clk->rate = clk->parent->rate / div; +} + +static void unity_clk_calc(struct clk *clk) +{ + clk->rate = clk->parent->rate; +} + +static struct clk csb_clk = { + .name = "csb_clk", + .calc = half_clk_calc, + .parent = &sys_clk, +}; + +static void e300_clk_calc(struct clk *clk) +{ + int spmf = (clockctl->spmr >> 16) & 0xf; + int ratex2 = clk->parent->rate * spmf; + + clk->rate = ratex2 / 2; +} + +static struct clk e300_clk = { + .name = "e300_clk", + .calc = e300_clk_calc, + .parent = &csb_clk, +}; + +static struct clk ips_clk = { + .name = "ips_clk", + .calc = generic_div_clk_calc, + .parent = &csb_clk, + .div_shift = 23, +}; + +/* + * Clocks controlled by SCCR1 (.reg = 0) + */ +static struct clk lpc_clk = { + .name = "lpc_clk", + .flags = CLK_HAS_CTRL, + .reg = 0, + .bit = 30, + .calc = generic_div_clk_calc, + .parent = &ips_clk, + .div_shift = 11, +}; + +static struct clk nfc_clk = { + .name = "nfc_clk", + .flags = CLK_HAS_CTRL, + .reg = 0, + .bit = 29, + .calc = generic_div_clk_calc, + .parent = &ips_clk, + .div_shift = 8, +}; + +static struct clk pata_clk = { + .name = "pata_clk", + .flags = CLK_HAS_CTRL, + .reg = 0, + .bit = 28, + .calc = unity_clk_calc, + .parent = &ips_clk, +}; + +/* + * PSC clocks (bits 27 - 16) + * are setup elsewhere + */ + +static struct clk sata_clk = { + .name = "sata_clk", + .flags = CLK_HAS_CTRL, + .reg = 0, + .bit = 14, + .calc = unity_clk_calc, + .parent = &ips_clk, +}; + +static struct clk fec_clk = { + .name = "fec_clk", + .flags = CLK_HAS_CTRL, + .reg = 0, + .bit = 13, + .calc = unity_clk_calc, + .parent = &ips_clk, +}; + +static struct clk pci_clk = { + .name = "pci_clk", + .flags = CLK_HAS_CTRL, + .reg = 0, + .bit = 11, + .calc = generic_div_clk_calc, + .parent = &csb_clk, + .div_shift = 20, +}; + +/* + * Clocks controlled by SCCR2 (.reg = 1) + */ +static struct clk diu_clk = { + .name = "diu_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 31, + .calc = diu_clk_calc, +}; + +static struct clk axe_clk = { + .name = "axe_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 30, + .calc = unity_clk_calc, + .parent = &csb_clk, +}; + +static struct clk usb1_clk = { + .name = "usb1_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 28, + .calc = unity_clk_calc, + .parent = &csb_clk, +}; + +static struct clk usb2_clk = { + .name = "usb2_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 27, + .calc = unity_clk_calc, + .parent = &csb_clk, +}; + +static struct clk i2c_clk = { + .name = "i2c_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 26, + .calc = unity_clk_calc, + .parent = &ips_clk, +}; + +static struct clk mscan_clk = { + .name = "mscan_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 25, + .calc = unity_clk_calc, + .parent = &ips_clk, +}; + +static struct clk sdhc_clk = { + .name = "sdhc_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 24, + .calc = unity_clk_calc, + .parent = &ips_clk, +}; + +static struct clk mbx_bus_clk = { + .name = "mbx_bus_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 22, + .calc = half_clk_calc, + .parent = &csb_clk, +}; + +static struct clk mbx_clk = { + .name = "mbx_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 21, + .calc = unity_clk_calc, + .parent = &csb_clk, +}; + +static struct clk mbx_3d_clk = { + .name = "mbx_3d_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 20, + .calc = generic_div_clk_calc, + .parent = &mbx_bus_clk, + .div_shift = 14, +}; + +static void psc_mclk_in_calc(struct clk *clk) +{ + clk->rate = devtree_getfreq("psc_mclk_in"); + if (!clk->rate) + clk->rate = 25000000; +} + +static struct clk psc_mclk_in = { + .name = "psc_mclk_in", + .calc = psc_mclk_in_calc, +}; + +static struct clk spdif_txclk = { + .name = "spdif_txclk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 23, +}; + +static struct clk spdif_rxclk = { + .name = "spdif_rxclk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 23, +}; + +static void ac97_clk_calc(struct clk *clk) +{ + /* ac97 bit clock is always 24.567 MHz */ + clk->rate = 24567000; +} + +static struct clk ac97_clk = { + .name = "ac97_clk_in", + .calc = ac97_clk_calc, +}; + +struct clk *rate_clks[] = { + &ref_clk, + &sys_clk, + &diu_clk, + &csb_clk, + &e300_clk, + &ips_clk, + &fec_clk, + &sata_clk, + &pata_clk, + &nfc_clk, + &lpc_clk, + &mbx_bus_clk, + &mbx_clk, + &mbx_3d_clk, + &axe_clk, + &usb1_clk, + &usb2_clk, + &i2c_clk, + &mscan_clk, + &sdhc_clk, + &pci_clk, + &psc_mclk_in, + &spdif_txclk, + &spdif_rxclk, + &ac97_clk, + NULL +}; + +static void rate_clk_init(struct clk *clk) +{ + if (clk->calc) { + clk->calc(clk); + clk->flags |= CLK_HAS_RATE; + clk_register(clk); + } else { + printk(KERN_WARNING + "Could not initialize clk %s without a calc routine\n", + clk->name); + } +} + +static void rate_clks_init(void) +{ + struct clk **cpp, *clk; + + cpp = rate_clks; + while ((clk = *cpp++)) + rate_clk_init(clk); +} + +/* + * There are two clk enable registers with 32 enable bits each + * psc clocks and device clocks are all stored in dev_clks + */ +struct clk dev_clks[2][32]; + +/* + * Given a psc number return the dev_clk + * associated with it + */ +static struct clk *psc_dev_clk(int pscnum) +{ + int reg, bit; + struct clk *clk; + + reg = 0; + bit = 27 - pscnum; + + clk = &dev_clks[reg][bit]; + clk->reg = 0; + clk->bit = bit; + return clk; +} + +/* + * PSC clock rate calculation + */ +static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np) +{ + unsigned long mclk_src = sys_clk.rate; + unsigned long mclk_div; + + /* + * Can only change value of mclk divider + * when the divider is disabled. + * + * Zero is not a valid divider so minimum + * divider is 1 + * + * disable/set divider/enable + */ + out_be32(&clockctl->pccr[pscnum], 0); + out_be32(&clockctl->pccr[pscnum], 0x00020000); + out_be32(&clockctl->pccr[pscnum], 0x00030000); + + if (clockctl->pccr[pscnum] & 0x80) { + clk->rate = spdif_rxclk.rate; + return; + } + + switch ((clockctl->pccr[pscnum] >> 14) & 0x3) { + case 0: + mclk_src = sys_clk.rate; + break; + case 1: + mclk_src = ref_clk.rate; + break; + case 2: + mclk_src = psc_mclk_in.rate; + break; + case 3: + mclk_src = spdif_txclk.rate; + break; + } + + mclk_div = ((clockctl->pccr[pscnum] >> 17) & 0x7fff) + 1; + clk->rate = mclk_src / mclk_div; +} + +/* + * Find all psc nodes in device tree and assign a clock + * with name "psc%d_mclk" and dev pointing at the device + * returned from of_find_device_by_node + */ +static void psc_clks_init(void) +{ + struct device_node *np; + const u32 *cell_index; + struct of_device *ofdev; + + for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") { + cell_index = of_get_property(np, "cell-index", NULL); + if (cell_index) { + int pscnum = *cell_index; + struct clk *clk = psc_dev_clk(pscnum); + + clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL; + ofdev = of_find_device_by_node(np); + clk->dev = &ofdev->dev; + /* + * AC97 is special rate clock does + * not go through normal path + */ + if (strcmp("ac97", np->name) == 0) + clk->rate = ac97_clk.rate; + else + psc_calc_rate(clk, pscnum, np); + sprintf(clk->name, "psc%d_mclk", pscnum); + clk_register(clk); + clk_enable(clk); + } + } +} + +static struct clk_interface mpc5121_clk_functions = { + .clk_get = mpc5121_clk_get, + .clk_enable = mpc5121_clk_enable, + .clk_disable = mpc5121_clk_disable, + .clk_get_rate = mpc5121_clk_get_rate, + .clk_put = mpc5121_clk_put, + .clk_round_rate = mpc5121_clk_round_rate, + .clk_set_rate = mpc5121_clk_set_rate, + .clk_set_parent = NULL, + .clk_get_parent = NULL, +}; + +static int +mpc5121_clk_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); + if (np) { + clockctl = of_iomap(np, 0); + of_node_put(np); + } + + if (!clockctl) { + printk(KERN_ERR "Could not map clock control registers\n"); + return 0; + } + + rate_clks_init(); + psc_clks_init(); + + /* leave clockctl mapped forever */ + /*iounmap(clockctl); */ + DEBUG_CLK_DUMP(); + clocks_initialized++; + clk_functions = mpc5121_clk_functions; + return 0; +} + + +arch_initcall(mpc5121_clk_init); diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c index 50bd3a31902..5ebf6939a69 100644 --- a/arch/powerpc/platforms/512x/mpc5121_ads.c +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. All rights reserved. * * Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007 * @@ -15,7 +15,6 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <linux/irq.h> #include <linux/of_platform.h> #include <asm/machdep.h> @@ -23,65 +22,22 @@ #include <asm/prom.h> #include <asm/time.h> -/** - * mpc512x_find_ips_freq - Find the IPS bus frequency for a device - * @node: device node - * - * Returns IPS bus frequency, or 0 if the bus frequency cannot be found. - */ -unsigned long -mpc512x_find_ips_freq(struct device_node *node) -{ - struct device_node *np; - const unsigned int *p_ips_freq = NULL; - - of_node_get(node); - while (node) { - p_ips_freq = of_get_property(node, "bus-frequency", NULL); - if (p_ips_freq) - break; - - np = of_get_parent(node); - of_node_put(node); - node = np; - } - if (node) - of_node_put(node); - - return p_ips_freq ? *p_ips_freq : 0; -} -EXPORT_SYMBOL(mpc512x_find_ips_freq); - -static struct of_device_id __initdata of_bus_ids[] = { - { .name = "soc", }, - { .name = "localbus", }, - {}, -}; +#include "mpc512x.h" +#include "mpc5121_ads.h" -static void __init mpc5121_ads_declare_of_platform_devices(void) +static void __init mpc5121_ads_setup_arch(void) { - /* Find every child of the SOC node and add it to of_platform */ - if (of_platform_bus_probe(NULL, of_bus_ids, NULL)) - printk(KERN_ERR __FILE__ ": " - "Error while probing of_platform bus\n"); + printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n"); + /* + * cpld regs are needed early + */ + mpc5121_ads_cpld_map(); } static void __init mpc5121_ads_init_IRQ(void) { - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,ipic"); - if (!np) - return; - - ipic_init(np, 0); - of_node_put(np); - - /* - * Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); + mpc512x_init_IRQ(); + mpc5121_ads_cpld_pic_init(); } /* @@ -97,7 +53,8 @@ static int __init mpc5121_ads_probe(void) define_machine(mpc5121_ads) { .name = "MPC5121 ADS", .probe = mpc5121_ads_probe, - .init = mpc5121_ads_declare_of_platform_devices, + .setup_arch = mpc5121_ads_setup_arch, + .init = mpc512x_declare_of_platform_devices, .init_IRQ = mpc5121_ads_init_IRQ, .get_irq = ipic_get_irq, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.h b/arch/powerpc/platforms/512x/mpc5121_ads.h new file mode 100644 index 00000000000..662076cfee2 --- /dev/null +++ b/arch/powerpc/platforms/512x/mpc5121_ads.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Prototypes for ADS5121 specific code + */ + +#ifndef __MPC512ADS_H__ +#define __MPC512ADS_H__ +extern void __init mpc5121_ads_cpld_map(void); +extern void __init mpc5121_ads_cpld_pic_init(void); +#endif /* __MPC512ADS_H__ */ diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c new file mode 100644 index 00000000000..a6ce8056662 --- /dev/null +++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: John Rigby, <jrigby@freescale.com> + * + * Description: + * MPC5121ADS CPLD irq handling + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/prom.h> + +static struct device_node *cpld_pic_node; +static struct irq_host *cpld_pic_host; + +/* + * Bits to ignore in the misc_status register + * 0x10 touch screen pendown is hard routed to irq1 + * 0x02 pci status is read from pci status register + */ +#define MISC_IGNORE 0x12 + +/* + * Nothing to ignore in pci status register + */ +#define PCI_IGNORE 0x00 + +struct cpld_pic { + u8 pci_mask; + u8 pci_status; + u8 route; + u8 misc_mask; + u8 misc_status; + u8 misc_control; +}; + +static struct cpld_pic __iomem *cpld_regs; + +static void __iomem * +irq_to_pic_mask(unsigned int irq) +{ + return irq <= 7 ? &cpld_regs->pci_mask : &cpld_regs->misc_mask; +} + +static unsigned int +irq_to_pic_bit(unsigned int irq) +{ + return 1 << (irq & 0x7); +} + +static void +cpld_mask_irq(unsigned int irq) +{ + unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq; + void __iomem *pic_mask = irq_to_pic_mask(cpld_irq); + + out_8(pic_mask, + in_8(pic_mask) | irq_to_pic_bit(cpld_irq)); +} + +static void +cpld_unmask_irq(unsigned int irq) +{ + unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq; + void __iomem *pic_mask = irq_to_pic_mask(cpld_irq); + + out_8(pic_mask, + in_8(pic_mask) & ~irq_to_pic_bit(cpld_irq)); +} + +static struct irq_chip cpld_pic = { + .typename = " CPLD PIC ", + .mask = cpld_mask_irq, + .ack = cpld_mask_irq, + .unmask = cpld_unmask_irq, +}; + +static int +cpld_pic_get_irq(int offset, u8 ignore, u8 __iomem *statusp, + u8 __iomem *maskp) +{ + int cpld_irq; + u8 status = in_8(statusp); + u8 mask = in_8(maskp); + + /* ignore don't cares and masked irqs */ + status |= (ignore | mask); + + if (status == 0xff) + return NO_IRQ_IGNORE; + + cpld_irq = ffz(status) + offset; + + return irq_linear_revmap(cpld_pic_host, cpld_irq); +} + +static void +cpld_pic_cascade(unsigned int irq, struct irq_desc *desc) +{ + irq = cpld_pic_get_irq(0, PCI_IGNORE, &cpld_regs->pci_status, + &cpld_regs->pci_mask); + if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) { + generic_handle_irq(irq); + return; + } + + irq = cpld_pic_get_irq(8, MISC_IGNORE, &cpld_regs->misc_status, + &cpld_regs->misc_mask); + if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) { + generic_handle_irq(irq); + return; + } +} + +static int +cpld_pic_host_match(struct irq_host *h, struct device_node *node) +{ + return cpld_pic_node == node; +} + +static int +cpld_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &cpld_pic, handle_level_irq); + return 0; +} + +static struct +irq_host_ops cpld_pic_host_ops = { + .match = cpld_pic_host_match, + .map = cpld_pic_host_map, +}; + +void __init +mpc5121_ads_cpld_map(void) +{ + struct device_node *np = NULL; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic"); + if (!np) { + printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n"); + return; + } + + cpld_regs = of_iomap(np, 0); + of_node_put(np); +} + +void __init +mpc5121_ads_cpld_pic_init(void) +{ + unsigned int cascade_irq; + struct device_node *np = NULL; + + pr_debug("cpld_ic_init\n"); + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic"); + if (!np) { + printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n"); + return; + } + + if (!cpld_regs) + goto end; + + cascade_irq = irq_of_parse_and_map(np, 0); + if (cascade_irq == NO_IRQ) + goto end; + + /* + * statically route touch screen pendown through 1 + * and ignore it here + * route all others through our cascade irq + */ + out_8(&cpld_regs->route, 0xfd); + out_8(&cpld_regs->pci_mask, 0xff); + /* unmask pci ints in misc mask */ + out_8(&cpld_regs->misc_mask, ~(MISC_IGNORE)); + + cpld_pic_node = of_node_get(np); + + cpld_pic_host = + irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 16, &cpld_pic_host_ops, 16); + if (!cpld_pic_host) { + printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n"); + goto end; + } + + set_irq_chained_handler(cascade_irq, cpld_pic_cascade); +end: + of_node_put(np); +} diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c new file mode 100644 index 00000000000..2479de9e2d1 --- /dev/null +++ b/arch/powerpc/platforms/512x/mpc5121_generic.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: John Rigby, <jrigby@freescale.com> + * + * Description: + * MPC5121 SoC setup + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/prom.h> +#include <asm/time.h> + +#include "mpc512x.h" + +/* + * list of supported boards + */ +static char *board[] __initdata = { + "prt,prtlvt", + NULL +}; + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc5121_generic_probe(void) +{ + unsigned long node = of_get_flat_dt_root(); + int i = 0; + + while (board[i]) { + if (of_flat_dt_is_compatible(node, board[i])) + break; + i++; + } + + return board[i] != NULL; +} + +define_machine(mpc5121_generic) { + .name = "MPC5121 generic", + .probe = mpc5121_generic_probe, + .init = mpc512x_declare_of_platform_devices, + .init_IRQ = mpc512x_init_IRQ, + .get_irq = ipic_get_irq, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h new file mode 100644 index 00000000000..9c03693cb00 --- /dev/null +++ b/arch/powerpc/platforms/512x/mpc512x.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Prototypes for MPC512x shared code + */ + +#ifndef __MPC512X_H__ +#define __MPC512X_H__ +extern unsigned long mpc512x_find_ips_freq(struct device_node *node); +extern void __init mpc512x_init_IRQ(void); +void __init mpc512x_declare_of_platform_devices(void); +#endif /* __MPC512X_H__ */ diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c new file mode 100644 index 00000000000..d8cd579f319 --- /dev/null +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: John Rigby <jrigby@freescale.com> + * + * Description: + * MPC512x Shared code + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/prom.h> +#include <asm/time.h> + +#include "mpc512x.h" + +unsigned long +mpc512x_find_ips_freq(struct device_node *node) +{ + struct device_node *np; + const unsigned int *p_ips_freq = NULL; + + of_node_get(node); + while (node) { + p_ips_freq = of_get_property(node, "bus-frequency", NULL); + if (p_ips_freq) + break; + + np = of_get_parent(node); + of_node_put(node); + node = np; + } + if (node) + of_node_put(node); + + return p_ips_freq ? *p_ips_freq : 0; +} +EXPORT_SYMBOL(mpc512x_find_ips_freq); + +void __init mpc512x_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-ipic"); + if (!np) + return; + + ipic_init(np, 0); + of_node_put(np); + + /* + * Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Nodes to do bus probe on, soc and localbus + */ +static struct of_device_id __initdata of_bus_ids[] = { + { .compatible = "fsl,mpc5121-immr", }, + { .compatible = "fsl,mpc5121-localbus", }, + {}, +}; + +void __init mpc512x_declare_of_platform_devices(void) +{ + if (of_platform_bus_probe(NULL, of_bus_ids, NULL)) + printk(KERN_ERR __FILE__ ": " + "Error while probing of_platform bus\n"); +} + diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index e3428ddd904..5a382bb15f6 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -63,6 +63,7 @@ #define MPC52xx_PCI_TCR_P 0x01000000 #define MPC52xx_PCI_TCR_LD 0x00010000 +#define MPC52xx_PCI_TCR_WCT8 0x00000008 #define MPC52xx_PCI_TBATR_DISABLE 0x0 #define MPC52xx_PCI_TBATR_ENABLE 0x1 @@ -313,7 +314,7 @@ mpc52xx_pci_setup(struct pci_controller *hose, out_be32(&pci_regs->tbatr1, MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM ); - out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD); + out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8); tmp = in_be32(&pci_regs->gscr); #if 0 diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c index 64ec7d62936..446c9ea85b3 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm.c +++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c @@ -443,7 +443,7 @@ mpc52xx_bcom_probe(struct of_device *op, const struct of_device_id *match) /* Done ! */ printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n", - bcom_eng->regs_base); + (long)bcom_eng->regs_base); return 0; diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/arch/powerpc/sysdev/bestcomm/gen_bd.c index 8d33eafbb3f..a3a134c35b0 100644 --- a/arch/powerpc/sysdev/bestcomm/gen_bd.c +++ b/arch/powerpc/sysdev/bestcomm/gen_bd.c @@ -20,6 +20,7 @@ #include <asm/io.h> #include <asm/mpc52xx.h> +#include <asm/mpc52xx_psc.h> #include "bestcomm.h" #include "bestcomm_priv.h" @@ -253,6 +254,100 @@ bcom_gen_bd_tx_release(struct bcom_task *tsk) } EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_release); +/* --------------------------------------------------------------------- + * PSC support code + */ + +/** + * bcom_psc_parameters - Bestcomm initialization value table for PSC devices + * + * This structure is only used internally. It is a lookup table for PSC + * specific parameters to bestcomm tasks. + */ +static struct bcom_psc_params { + int rx_initiator; + int rx_ipr; + int tx_initiator; + int tx_ipr; +} bcom_psc_params[] = { + [0] = { + .rx_initiator = BCOM_INITIATOR_PSC1_RX, + .rx_ipr = BCOM_IPR_PSC1_RX, + .tx_initiator = BCOM_INITIATOR_PSC1_TX, + .tx_ipr = BCOM_IPR_PSC1_TX, + }, + [1] = { + .rx_initiator = BCOM_INITIATOR_PSC2_RX, + .rx_ipr = BCOM_IPR_PSC2_RX, + .tx_initiator = BCOM_INITIATOR_PSC2_TX, + .tx_ipr = BCOM_IPR_PSC2_TX, + }, + [2] = { + .rx_initiator = BCOM_INITIATOR_PSC3_RX, + .rx_ipr = BCOM_IPR_PSC3_RX, + .tx_initiator = BCOM_INITIATOR_PSC3_TX, + .tx_ipr = BCOM_IPR_PSC3_TX, + }, + [3] = { + .rx_initiator = BCOM_INITIATOR_PSC4_RX, + .rx_ipr = BCOM_IPR_PSC4_RX, + .tx_initiator = BCOM_INITIATOR_PSC4_TX, + .tx_ipr = BCOM_IPR_PSC4_TX, + }, + [4] = { + .rx_initiator = BCOM_INITIATOR_PSC5_RX, + .rx_ipr = BCOM_IPR_PSC5_RX, + .tx_initiator = BCOM_INITIATOR_PSC5_TX, + .tx_ipr = BCOM_IPR_PSC5_TX, + }, + [5] = { + .rx_initiator = BCOM_INITIATOR_PSC6_RX, + .rx_ipr = BCOM_IPR_PSC6_RX, + .tx_initiator = BCOM_INITIATOR_PSC6_TX, + .tx_ipr = BCOM_IPR_PSC6_TX, + }, +}; + +/** + * bcom_psc_gen_bd_rx_init - Allocate a receive bcom_task for a PSC port + * @psc_num: Number of the PSC to allocate a task for + * @queue_len: number of buffer descriptors to allocate for the task + * @fifo: physical address of FIFO register + * @maxbufsize: Maximum receive data size in bytes. + * + * Allocate a bestcomm task structure for receiving data from a PSC. + */ +struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len, + phys_addr_t fifo, int maxbufsize) +{ + if (psc_num >= MPC52xx_PSC_MAXNUM) + return NULL; + + return bcom_gen_bd_rx_init(queue_len, fifo, + bcom_psc_params[psc_num].rx_initiator, + bcom_psc_params[psc_num].rx_ipr, + maxbufsize); +} +EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_rx_init); + +/** + * bcom_psc_gen_bd_tx_init - Allocate a transmit bcom_task for a PSC port + * @psc_num: Number of the PSC to allocate a task for + * @queue_len: number of buffer descriptors to allocate for the task + * @fifo: physical address of FIFO register + * + * Allocate a bestcomm task structure for transmitting data to a PSC. + */ +struct bcom_task * +bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len, phys_addr_t fifo) +{ + struct psc; + return bcom_gen_bd_tx_init(queue_len, fifo, + bcom_psc_params[psc_num].tx_initiator, + bcom_psc_params[psc_num].tx_ipr); +} +EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_tx_init); + MODULE_DESCRIPTION("BestComm General Buffer Descriptor tasks driver"); MODULE_AUTHOR("Jeff Gibbons <jeff.gibbons@appspec.com>"); diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.h b/arch/powerpc/sysdev/bestcomm/gen_bd.h index 5b6fa803c6a..de47260e69d 100644 --- a/arch/powerpc/sysdev/bestcomm/gen_bd.h +++ b/arch/powerpc/sysdev/bestcomm/gen_bd.h @@ -44,5 +44,10 @@ extern void bcom_gen_bd_tx_release(struct bcom_task *tsk); +/* PSC support utility wrappers */ +struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len, + phys_addr_t fifo, int maxbufsize); +struct bcom_task * bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len, + phys_addr_t fifo); #endif /* __BESTCOMM_GEN_BD_H__ */ diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/arch/powerpc/sysdev/bestcomm/sram.c index 99784383a84..5d74ef7a651 100644 --- a/arch/powerpc/sysdev/bestcomm/sram.c +++ b/arch/powerpc/sysdev/bestcomm/sram.c @@ -86,7 +86,7 @@ int bcom_sram_init(struct device_node *sram_node, char *owner) if (!bcom_sram->base_virt) { printk(KERN_ERR "%s: bcom_sram_init: " "Map error SRAM zone 0x%08lx (0x%0x)!\n", - owner, bcom_sram->base_phys, bcom_sram->size ); + owner, (long)bcom_sram->base_phys, bcom_sram->size ); rv = -ENOMEM; goto error_release; } diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index ca54563d5c7..ebcec7362f9 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -414,139 +414,6 @@ err: arch_initcall(gfar_of_init); -#ifdef CONFIG_I2C_BOARDINFO -#include <linux/i2c.h> -struct i2c_driver_device { - char *of_device; - char *i2c_type; -}; - -static struct i2c_driver_device i2c_devices[] __initdata = { - {"ricoh,rs5c372a", "rs5c372a"}, - {"ricoh,rs5c372b", "rs5c372b"}, - {"ricoh,rv5c386", "rv5c386"}, - {"ricoh,rv5c387a", "rv5c387a"}, - {"dallas,ds1307", "ds1307"}, - {"dallas,ds1337", "ds1337"}, - {"dallas,ds1338", "ds1338"}, - {"dallas,ds1339", "ds1339"}, - {"dallas,ds1340", "ds1340"}, - {"stm,m41t00", "m41t00"}, - {"dallas,ds1374", "ds1374"}, - {"cirrus,cs4270", "cs4270"}, -}; - -static int __init of_find_i2c_driver(struct device_node *node, - struct i2c_board_info *info) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) { - if (!of_device_is_compatible(node, i2c_devices[i].of_device)) - continue; - if (strlcpy(info->type, i2c_devices[i].i2c_type, - I2C_NAME_SIZE) >= I2C_NAME_SIZE) - return -ENOMEM; - return 0; - } - - pr_warning("fsl_soc.c: unrecognized i2c node %s\n", - (const char *) of_get_property(node, "compatible", NULL)); - - return -ENODEV; -} - -static void __init of_register_i2c_devices(struct device_node *adap_node, - int bus_num) -{ - struct device_node *node = NULL; - - while ((node = of_get_next_child(adap_node, node))) { - struct i2c_board_info info = {}; - const u32 *addr; - int len; - - addr = of_get_property(node, "reg", &len); - if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) { - printk(KERN_WARNING "fsl_soc.c: invalid i2c device entry\n"); - continue; - } - - info.irq = irq_of_parse_and_map(node, 0); - if (info.irq == NO_IRQ) - info.irq = -1; - - if (of_find_i2c_driver(node, &info) < 0) - continue; - - info.addr = *addr; - - i2c_register_board_info(bus_num, &info, 1); - } -} - -static int __init fsl_i2c_of_init(void) -{ - struct device_node *np; - unsigned int i = 0; - struct platform_device *i2c_dev; - int ret; - - for_each_compatible_node(np, NULL, "fsl-i2c") { - struct resource r[2]; - struct fsl_i2c_platform_data i2c_data; - const unsigned char *flags = NULL; - int idx; - const u32 *iprop; - - memset(&r, 0, sizeof(r)); - memset(&i2c_data, 0, sizeof(i2c_data)); - - ret = of_address_to_resource(np, 0, &r[0]); - if (ret) - goto err; - - of_irq_to_resource(np, 0, &r[1]); - - iprop = of_get_property(np, "cell-index", NULL); - idx = iprop ? *iprop : i; - - i2c_dev = platform_device_register_simple("fsl-i2c", idx, r, 2); - if (IS_ERR(i2c_dev)) { - ret = PTR_ERR(i2c_dev); - goto err; - } - - i2c_data.device_flags = 0; - flags = of_get_property(np, "dfsrr", NULL); - if (flags) - i2c_data.device_flags |= FSL_I2C_DEV_SEPARATE_DFSRR; - - flags = of_get_property(np, "fsl5200-clocking", NULL); - if (flags) - i2c_data.device_flags |= FSL_I2C_DEV_CLOCK_5200; - - ret = - platform_device_add_data(i2c_dev, &i2c_data, - sizeof(struct - fsl_i2c_platform_data)); - if (ret) - goto unreg; - - of_register_i2c_devices(np, idx); - i++; - } - - return 0; - -unreg: - platform_device_unregister(i2c_dev); -err: - return ret; -} - -arch_initcall(fsl_i2c_of_init); -#endif #ifdef CONFIG_PPC_83xx static int __init mpc83xx_wdt_init(void) diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index bc79df6e7cb..a9e827356d0 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -16,10 +16,10 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/libata.h> +#include <linux/of_platform.h> #include <asm/types.h> #include <asm/prom.h> -#include <asm/of_platform.h> #include <asm/mpc52xx.h> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index a076129de7e..4fdfb62d6f3 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -17,7 +17,8 @@ #include <linux/module.h> #include <linux/sched.h> #include <linux/init.h> -#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/of_i2c.h> #include <asm/io.h> #include <linux/fsl_devices.h> @@ -25,13 +26,13 @@ #include <linux/interrupt.h> #include <linux/delay.h> -#define MPC_I2C_ADDR 0x00 +#define DRV_NAME "mpc-i2c" + #define MPC_I2C_FDR 0x04 #define MPC_I2C_CR 0x08 #define MPC_I2C_SR 0x0c #define MPC_I2C_DR 0x10 #define MPC_I2C_DFSRR 0x14 -#define MPC_I2C_REGION 0x20 #define CCR_MEN 0x80 #define CCR_MIEN 0x40 @@ -315,102 +316,117 @@ static struct i2c_adapter mpc_ops = { .timeout = 1, }; -static int fsl_i2c_probe(struct platform_device *pdev) +static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_id *match) { int result = 0; struct mpc_i2c *i2c; - struct fsl_i2c_platform_data *pdata; - struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data; i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); if (!i2c) return -ENOMEM; - i2c->irq = platform_get_irq(pdev, 0); - if (i2c->irq < 0) - i2c->irq = NO_IRQ; /* Use polling */ + if (of_get_property(op->node, "dfsrr", NULL)) + i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR; - i2c->flags = pdata->device_flags; - init_waitqueue_head(&i2c->queue); + if (of_device_is_compatible(op->node, "fsl,mpc5200-i2c") || + of_device_is_compatible(op->node, "mpc5200-i2c")) + i2c->flags |= FSL_I2C_DEV_CLOCK_5200; - i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION); + init_waitqueue_head(&i2c->queue); + i2c->base = of_iomap(op->node, 0); if (!i2c->base) { printk(KERN_ERR "i2c-mpc - failed to map controller\n"); result = -ENOMEM; goto fail_map; } - if (i2c->irq != NO_IRQ) - if ((result = request_irq(i2c->irq, mpc_i2c_isr, - IRQF_SHARED, "i2c-mpc", i2c)) < 0) { - printk(KERN_ERR - "i2c-mpc - failed to attach interrupt\n"); - goto fail_irq; + i2c->irq = irq_of_parse_and_map(op->node, 0); + if (i2c->irq != NO_IRQ) { /* i2c->irq = NO_IRQ implies polling */ + result = request_irq(i2c->irq, mpc_i2c_isr, + IRQF_SHARED, "i2c-mpc", i2c); + if (result < 0) { + printk(KERN_ERR "i2c-mpc - failed to attach interrupt\n"); + goto fail_request; } - + } + mpc_i2c_setclock(i2c); - platform_set_drvdata(pdev, i2c); + + dev_set_drvdata(&op->dev, i2c); i2c->adap = mpc_ops; - i2c->adap.nr = pdev->id; i2c_set_adapdata(&i2c->adap, i2c); - i2c->adap.dev.parent = &pdev->dev; - if ((result = i2c_add_numbered_adapter(&i2c->adap)) < 0) { + i2c->adap.dev.parent = &op->dev; + + result = i2c_add_adapter(&i2c->adap); + if (result < 0) { printk(KERN_ERR "i2c-mpc - failed to add adapter\n"); goto fail_add; } + of_register_i2c_devices(&i2c->adap, op->node); return result; - fail_add: - if (i2c->irq != NO_IRQ) - free_irq(i2c->irq, i2c); - fail_irq: - iounmap(i2c->base); - fail_map: + fail_add: + dev_set_drvdata(&op->dev, NULL); + free_irq(i2c->irq, i2c); + fail_request: + irq_dispose_mapping(i2c->irq); + iounmap(i2c->base); + fail_map: kfree(i2c); return result; }; -static int fsl_i2c_remove(struct platform_device *pdev) +static int __devexit fsl_i2c_remove(struct of_device *op) { - struct mpc_i2c *i2c = platform_get_drvdata(pdev); + struct mpc_i2c *i2c = dev_get_drvdata(&op->dev); i2c_del_adapter(&i2c->adap); - platform_set_drvdata(pdev, NULL); + dev_set_drvdata(&op->dev, NULL); if (i2c->irq != NO_IRQ) free_irq(i2c->irq, i2c); + irq_dispose_mapping(i2c->irq); iounmap(i2c->base); kfree(i2c); return 0; }; -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:fsl-i2c"); +static const struct of_device_id mpc_i2c_of_match[] = { + {.compatible = "fsl-i2c",}, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc_i2c_of_match); + /* Structure for a device driver */ -static struct platform_driver fsl_i2c_driver = { - .probe = fsl_i2c_probe, - .remove = fsl_i2c_remove, - .driver = { - .owner = THIS_MODULE, - .name = "fsl-i2c", +static struct of_platform_driver mpc_i2c_driver = { + .match_table = mpc_i2c_of_match, + .probe = fsl_i2c_probe, + .remove = __devexit_p(fsl_i2c_remove), + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, }, }; static int __init fsl_i2c_init(void) { - return platform_driver_register(&fsl_i2c_driver); + int rv; + + rv = of_register_platform_driver(&mpc_i2c_driver); + if (rv) + printk(KERN_ERR DRV_NAME + " of_register_platform_driver failed (%i)\n", rv); + return rv; } static void __exit fsl_i2c_exit(void) { - platform_driver_unregister(&fsl_i2c_driver); + of_unregister_platform_driver(&mpc_i2c_driver); } module_init(fsl_i2c_init); diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index b2ccdcbeb89..5c015d310d4 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/of.h> +#include <linux/of_i2c.h> #include <linux/module.h> struct i2c_driver_device { diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index 681d62325d3..604e5f0a2d9 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -17,7 +17,7 @@ #include <linux/interrupt.h> #if defined(CONFIG_PPC_MERGE) -#include <asm/of_platform.h> +#include <linux/of_platform.h> #else #include <linux/platform_device.h> #endif diff --git a/drivers/watchdog/mpc5200_wdt.c b/drivers/watchdog/mpc5200_wdt.c index 80a91d4cea1..77c1c2ae2cc 100644 --- a/drivers/watchdog/mpc5200_wdt.c +++ b/drivers/watchdog/mpc5200_wdt.c @@ -4,7 +4,7 @@ #include <linux/watchdog.h> #include <linux/io.h> #include <linux/spinlock.h> -#include <asm/of_platform.h> +#include <linux/of_platform.h> #include <asm/uaccess.h> #include <asm/mpc52xx.h> |