diff options
-rw-r--r-- | arch/powerpc/kernel/pci_32.c | 215 |
1 files changed, 1 insertions, 214 deletions
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 1020d04b0a5..dfb16580252 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -711,217 +711,6 @@ void pcibios_make_OF_bus_map(void) } #endif /* CONFIG_PPC_OF */ -#ifdef CONFIG_PPC_PMAC -/* - * This set of routines checks for PCI<->PCI bridges that have closed - * IO resources and have child devices. It tries to re-open an IO - * window on them. - * - * This is a _temporary_ fix to workaround a problem with Apple's OF - * closing IO windows on P2P bridges when the OF drivers of cards - * below this bridge don't claim any IO range (typically ATI or - * Adaptec). - * - * A more complete fix would be to use drivers/pci/setup-bus.c, which - * involves a working pcibios_fixup_pbus_ranges(), some more care about - * ordering when creating the host bus resources, and maybe a few more - * minor tweaks - */ - -/* Initialize bridges with base/limit values we have collected */ -static void __init -do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga) -{ - struct pci_dev *bridge = bus->self; - struct pci_controller* hose = (struct pci_controller *)bridge->sysdata; - u32 l; - u16 w; - struct resource res; - - if (bus->resource[0] == NULL) - return; - res = *(bus->resource[0]); - - DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge)); - res.start -= ((unsigned long) hose->io_base_virt - isa_io_base); - res.end -= ((unsigned long) hose->io_base_virt - isa_io_base); - DBG(" IO window: %016llx-%016llx\n", res.start, res.end); - - /* Set up the top and bottom of the PCI I/O segment for this bus. */ - pci_read_config_dword(bridge, PCI_IO_BASE, &l); - l &= 0xffff000f; - l |= (res.start >> 8) & 0x00f0; - l |= res.end & 0xf000; - pci_write_config_dword(bridge, PCI_IO_BASE, l); - - if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) { - l = (res.start >> 16) | (res.end & 0xffff0000); - pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l); - } - - pci_read_config_word(bridge, PCI_COMMAND, &w); - w |= PCI_COMMAND_IO; - pci_write_config_word(bridge, PCI_COMMAND, w); - -#if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */ - if (enable_vga) { - pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w); - w |= PCI_BRIDGE_CTL_VGA; - pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w); - } -#endif -} - -/* This function is pretty basic and actually quite broken for the - * general case, it's enough for us right now though. It's supposed - * to tell us if we need to open an IO range at all or not and what - * size. - */ -static int __init -check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga) -{ - struct pci_dev *dev; - int i; - int rc = 0; - -#define push_end(res, mask) do { \ - BUG_ON((mask+1) & mask); \ - res->end = (res->end + mask) | mask; \ -} while (0) - - list_for_each_entry(dev, &bus->devices, bus_list) { - u16 class = dev->class >> 8; - - if (class == PCI_CLASS_DISPLAY_VGA || - class == PCI_CLASS_NOT_DEFINED_VGA) - *found_vga = 1; - if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate) - rc |= check_for_io_childs(dev->subordinate, res, found_vga); - if (class == PCI_CLASS_BRIDGE_CARDBUS) - push_end(res, 0xfff); - - for (i=0; i<PCI_NUM_RESOURCES; i++) { - struct resource *r; - unsigned long r_size; - - if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI - && i >= PCI_BRIDGE_RESOURCES) - continue; - r = &dev->resource[i]; - r_size = r->end - r->start; - if (r_size < 0xfff) - r_size = 0xfff; - if (r->flags & IORESOURCE_IO && (r_size) != 0) { - rc = 1; - push_end(res, r_size); - } - } - } - - return rc; -} - -/* Here we scan all P2P bridges of a given level that have a closed - * IO window. Note that the test for the presence of a VGA card should - * be improved to take into account already configured P2P bridges, - * currently, we don't see them and might end up configuring 2 bridges - * with VGA pass through enabled - */ -static void __init -do_fixup_p2p_level(struct pci_bus *bus) -{ - struct pci_bus *b; - int i, parent_io; - int has_vga = 0; - - for (parent_io=0; parent_io<4; parent_io++) - if (bus->resource[parent_io] - && bus->resource[parent_io]->flags & IORESOURCE_IO) - break; - if (parent_io >= 4) - return; - - list_for_each_entry(b, &bus->children, node) { - struct pci_dev *d = b->self; - struct pci_controller* hose = (struct pci_controller *)d->sysdata; - struct resource *res = b->resource[0]; - struct resource tmp_res; - unsigned long max; - int found_vga = 0; - - memset(&tmp_res, 0, sizeof(tmp_res)); - tmp_res.start = bus->resource[parent_io]->start; - - /* We don't let low addresses go through that closed P2P bridge, well, - * that may not be necessary but I feel safer that way - */ - if (tmp_res.start == 0) - tmp_res.start = 0x1000; - - if (!list_empty(&b->devices) && res && res->flags == 0 && - res != bus->resource[parent_io] && - (d->class >> 8) == PCI_CLASS_BRIDGE_PCI && - check_for_io_childs(b, &tmp_res, &found_vga)) { - u8 io_base_lo; - - printk(KERN_INFO "Fixing up IO bus %s\n", b->name); - - if (found_vga) { - if (has_vga) { - printk(KERN_WARNING "Skipping VGA, already active" - " on bus segment\n"); - found_vga = 0; - } else - has_vga = 1; - } - pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo); - - if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) - max = ((unsigned long) hose->io_base_virt - - isa_io_base) + 0xffffffff; - else - max = ((unsigned long) hose->io_base_virt - - isa_io_base) + 0xffff; - - *res = tmp_res; - res->flags = IORESOURCE_IO; - res->name = b->name; - - /* Find a resource in the parent where we can allocate */ - for (i = 0 ; i < 4; i++) { - struct resource *r = bus->resource[i]; - if (!r) - continue; - if ((r->flags & IORESOURCE_IO) == 0) - continue; - DBG("Trying to allocate from %016llx, size %016llx from parent" - " res %d: %016llx -> %016llx\n", - res->start, res->end, i, r->start, r->end); - - if (allocate_resource(r, res, res->end + 1, res->start, max, - res->end + 1, NULL, NULL) < 0) { - DBG("Failed !\n"); - continue; - } - do_update_p2p_io_resource(b, found_vga); - break; - } - } - do_fixup_p2p_level(b); - } -} - -static void -pcibios_fixup_p2p_bridges(void) -{ - struct pci_bus *b; - - list_for_each_entry(b, &pci_root_buses, node) - do_fixup_p2p_level(b); -} - -#endif /* CONFIG_PPC_PMAC */ - static int __init pcibios_init(void) { @@ -961,9 +750,7 @@ pcibios_init(void) pcibios_allocate_bus_resources(&pci_root_buses); pcibios_allocate_resources(0); pcibios_allocate_resources(1); -#ifdef CONFIG_PPC_PMAC - pcibios_fixup_p2p_bridges(); -#endif /* CONFIG_PPC_PMAC */ + DBG("PCI: Assigning unassigned resouces...\n"); pci_assign_unassigned_resources(); |