diff options
26 files changed, 3519 insertions, 297 deletions
diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 2f0ddc15b5a..9c647bd7c5a 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -81,6 +81,9 @@ This defines trickle and fast charges. For batteries that are already charged or discharging, 'n/a' can be displayed (or 'unknown', if the status is not known). +AUTHENTIC - indicates the power supply (battery or charger) connected +to the platform is authentic(1) or non authentic(0). + HEALTH - represents health of the battery, values corresponds to POWER_SUPPLY_HEALTH_*, defined in battery.h. @@ -113,8 +116,12 @@ be negative; there is no empty or full value. It is only useful for relative, time-based measurements. CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger. +CONSTANT_CHARGE_CURRENT_MAX - maximum charge current supported by the +power supply object. CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger. +CONSTANT_CHARGE_VOLTAGE_MAX - maximum charge voltage supported by the +power supply object. ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 59d117e9fa3..8fa86edf70d 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -24,6 +24,7 @@ #include <linux/mfd/core.h> #include <linux/mfd/88pm860x.h> #include <linux/regulator/machine.h> +#include <linux/power/charger-manager.h> #define INT_STATUS_NUM 3 @@ -150,7 +151,8 @@ static struct resource battery_resources[] __devinitdata = { static struct resource charger_resources[] __devinitdata = { {PM8607_IRQ_CHG, PM8607_IRQ_CHG, "charger detect", IORESOURCE_IRQ,}, {PM8607_IRQ_CHG_DONE, PM8607_IRQ_CHG_DONE, "charging done", IORESOURCE_IRQ,}, - {PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging timeout", IORESOURCE_IRQ,}, + {PM8607_IRQ_CHG_FAIL, PM8607_IRQ_CHG_FAIL, "charging timeout", IORESOURCE_IRQ,}, + {PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging fault", IORESOURCE_IRQ,}, {PM8607_IRQ_GPADC1, PM8607_IRQ_GPADC1, "battery temperature", IORESOURCE_IRQ,}, {PM8607_IRQ_VBAT, PM8607_IRQ_VBAT, "battery voltage", IORESOURCE_IRQ,}, {PM8607_IRQ_VCHG, PM8607_IRQ_VCHG, "vchg voltage", IORESOURCE_IRQ,}, @@ -318,10 +320,15 @@ static struct regulator_init_data preg_init_data = { .consumer_supplies = &preg_supply[0], }; +static struct charger_regulator chg_desc_regulator_data[] = { + { .regulator_name = "preg", }, +}; + static struct mfd_cell power_devs[] = { {"88pm860x-battery", -1,}, {"88pm860x-charger", -1,}, {"88pm860x-preg", -1,}, + {"charger-manager", -1,}, }; static struct mfd_cell rtc_devs[] = { @@ -929,6 +936,19 @@ static void __devinit device_power_init(struct pm860x_chip *chip, NULL, chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add preg subdev\n"); + + if (pdata->chg_desc) { + pdata->chg_desc->charger_regulators = + &chg_desc_regulator_data[0]; + pdata->chg_desc->num_charger_regulators = + ARRAY_SIZE(chg_desc_regulator_data), + power_devs[3].platform_data = pdata->chg_desc; + power_devs[3].pdata_size = sizeof(*pdata->chg_desc); + ret = mfd_add_devices(chip->dev, 0, &power_devs[3], 1, + NULL, chip->irq_base, NULL); + if (ret < 0) + dev_err(chip->dev, "Failed to add chg-manager subdev\n"); + } } static void __devinit device_onkey_init(struct pm860x_chip *chip, diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/88pm860x_battery.c new file mode 100644 index 00000000000..beed5ecf75e --- /dev/null +++ b/drivers/power/88pm860x_battery.c @@ -0,0 +1,1041 @@ +/* + * Battery driver for Marvell 88PM860x PMIC + * + * Copyright (c) 2012 Marvell International Ltd. + * Author: Jett Zhou <jtzhou@marvell.com> + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/string.h> +#include <linux/power_supply.h> +#include <linux/mfd/88pm860x.h> +#include <linux/delay.h> + +/* bit definitions of Status Query Interface 2 */ +#define STATUS2_CHG (1 << 2) +#define STATUS2_BAT (1 << 3) +#define STATUS2_VBUS (1 << 4) + +/* bit definitions of Measurement Enable 1 Register */ +#define MEAS1_TINT (1 << 3) +#define MEAS1_GP1 (1 << 5) + +/* bit definitions of Measurement Enable 3 Register */ +#define MEAS3_IBAT (1 << 0) +#define MEAS3_BAT_DET (1 << 1) +#define MEAS3_CC (1 << 2) + +/* bit definitions of Measurement Off Time Register */ +#define MEAS_OFF_SLEEP_EN (1 << 1) + +/* bit definitions of GPADC Bias Current 2 Register */ +#define GPBIAS2_GPADC1_SET (2 << 4) +/* GPADC1 Bias Current value in uA unit */ +#define GPBIAS2_GPADC1_UA ((GPBIAS2_GPADC1_SET >> 4) * 5 + 1) + +/* bit definitions of GPADC Misc 1 Register */ +#define GPMISC1_GPADC_EN (1 << 0) + +/* bit definitions of Charger Control 6 Register */ +#define CC6_BAT_DET_GPADC1 1 + +/* bit definitions of Coulomb Counter Reading Register */ +#define CCNT_AVG_SEL (4 << 3) + +/* bit definitions of RTC miscellaneous Register1 */ +#define RTC_SOC_5LSB (0x1F << 3) + +/* bit definitions of RTC Register1 */ +#define RTC_SOC_3MSB (0x7) + +/* bit definitions of Power up Log register */ +#define BAT_WU_LOG (1<<6) + +/* coulomb counter index */ +#define CCNT_POS1 0 +#define CCNT_POS2 1 +#define CCNT_NEG1 2 +#define CCNT_NEG2 3 +#define CCNT_SPOS 4 +#define CCNT_SNEG 5 + +/* OCV -- Open Circuit Voltage */ +#define OCV_MODE_ACTIVE 0 +#define OCV_MODE_SLEEP 1 + +/* Vbat range of CC for measuring Rbat */ +#define LOW_BAT_THRESHOLD 3600 +#define VBATT_RESISTOR_MIN 3800 +#define VBATT_RESISTOR_MAX 4100 + +/* TBAT for batt, TINT for chip itself */ +#define PM860X_TEMP_TINT (0) +#define PM860X_TEMP_TBAT (1) + +/* + * Battery temperature based on NTC resistor, defined + * corresponding resistor value -- Ohm / C degeree. + */ +#define TBAT_NEG_25D 127773 /* -25 */ +#define TBAT_NEG_10D 54564 /* -10 */ +#define TBAT_0D 32330 /* 0 */ +#define TBAT_10D 19785 /* 10 */ +#define TBAT_20D 12468 /* 20 */ +#define TBAT_30D 8072 /* 30 */ +#define TBAT_40D 5356 /* 40 */ + +struct pm860x_battery_info { + struct pm860x_chip *chip; + struct i2c_client *i2c; + struct device *dev; + + struct power_supply battery; + struct mutex lock; + int status; + int irq_cc; + int irq_batt; + int max_capacity; + int resistor; /* Battery Internal Resistor */ + int last_capacity; + int start_soc; + unsigned present:1; + unsigned temp_type:1; /* TINT or TBAT */ +}; + +struct ccnt { + unsigned long long int pos; + unsigned long long int neg; + unsigned int spos; + unsigned int sneg; + + int total_chg; /* mAh(3.6C) */ + int total_dischg; /* mAh(3.6C) */ +}; + +/* + * State of Charge. + * The first number is mAh(=3.6C), and the second number is percent point. + */ +static int array_soc[][2] = { + {4170, 100}, {4154, 99}, {4136, 98}, {4122, 97}, {4107, 96}, + {4102, 95}, {4088, 94}, {4081, 93}, {4070, 92}, {4060, 91}, + {4053, 90}, {4044, 89}, {4035, 88}, {4028, 87}, {4019, 86}, + {4013, 85}, {4006, 84}, {3995, 83}, {3987, 82}, {3982, 81}, + {3976, 80}, {3968, 79}, {3962, 78}, {3954, 77}, {3946, 76}, + {3941, 75}, {3934, 74}, {3929, 73}, {3922, 72}, {3916, 71}, + {3910, 70}, {3904, 69}, {3898, 68}, {3892, 67}, {3887, 66}, + {3880, 65}, {3874, 64}, {3868, 63}, {3862, 62}, {3854, 61}, + {3849, 60}, {3843, 59}, {3840, 58}, {3833, 57}, {3829, 56}, + {3824, 55}, {3818, 54}, {3815, 53}, {3810, 52}, {3808, 51}, + {3804, 50}, {3801, 49}, {3798, 48}, {3796, 47}, {3792, 46}, + {3789, 45}, {3785, 44}, {3784, 43}, {3782, 42}, {3780, 41}, + {3777, 40}, {3776, 39}, {3774, 38}, {3772, 37}, {3771, 36}, + {3769, 35}, {3768, 34}, {3764, 33}, {3763, 32}, {3760, 31}, + {3760, 30}, {3754, 29}, {3750, 28}, {3749, 27}, {3744, 26}, + {3740, 25}, {3734, 24}, {3732, 23}, {3728, 22}, {3726, 21}, + {3720, 20}, {3716, 19}, {3709, 18}, {3703, 17}, {3698, 16}, + {3692, 15}, {3683, 14}, {3675, 13}, {3670, 12}, {3665, 11}, + {3661, 10}, {3649, 9}, {3637, 8}, {3622, 7}, {3609, 6}, + {3580, 5}, {3558, 4}, {3540, 3}, {3510, 2}, {3429, 1}, +}; + +static struct ccnt ccnt_data; + +/* + * register 1 bit[7:0] -- bit[11:4] of measured value of voltage + * register 0 bit[3:0] -- bit[3:0] of measured value of voltage + */ +static int measure_12bit_voltage(struct pm860x_battery_info *info, + int offset, int *data) +{ + unsigned char buf[2]; + int ret; + + ret = pm860x_bulk_read(info->i2c, offset, 2, buf); + if (ret < 0) + return ret; + + *data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f); + /* V_MEAS(mV) = data * 1.8 * 1000 / (2^12) */ + *data = ((*data & 0xfff) * 9 * 25) >> 9; + return 0; +} + +static int measure_vbatt(struct pm860x_battery_info *info, int state, + int *data) +{ + unsigned char buf[5]; + int ret; + + switch (state) { + case OCV_MODE_ACTIVE: + ret = measure_12bit_voltage(info, PM8607_VBAT_MEAS1, data); + if (ret) + return ret; + /* V_BATT_MEAS(mV) = value * 3 * 1.8 * 1000 / (2^12) */ + *data *= 3; + break; + case OCV_MODE_SLEEP: + /* + * voltage value of VBATT in sleep mode is saved in different + * registers. + * bit[11:10] -- bit[7:6] of LDO9(0x18) + * bit[9:8] -- bit[7:6] of LDO8(0x17) + * bit[7:6] -- bit[7:6] of LDO7(0x16) + * bit[5:4] -- bit[7:6] of LDO6(0x15) + * bit[3:0] -- bit[7:4] of LDO5(0x14) + */ + ret = pm860x_bulk_read(info->i2c, PM8607_LDO5, 5, buf); + if (ret < 0) + return ret; + ret = ((buf[4] >> 6) << 10) | ((buf[3] >> 6) << 8) + | ((buf[2] >> 6) << 6) | ((buf[1] >> 6) << 4) + | (buf[0] >> 4); + /* V_BATT_MEAS(mV) = data * 3 * 1.8 * 1000 / (2^12) */ + *data = ((*data & 0xff) * 27 * 25) >> 9; + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * Return value is signed data. + * Negative value means discharging, and positive value means charging. + */ +static int measure_current(struct pm860x_battery_info *info, int *data) +{ + unsigned char buf[2]; + short s; + int ret; + + ret = pm860x_bulk_read(info->i2c, PM8607_IBAT_MEAS1, 2, buf); + if (ret < 0) + return ret; + + s = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff); + /* current(mA) = value * 0.125 */ + *data = s >> 3; + return 0; +} + +static int set_charger_current(struct pm860x_battery_info *info, int data, + int *old) +{ + int ret; + + if (data < 50 || data > 1600 || !old) + return -EINVAL; + + data = ((data - 50) / 50) & 0x1f; + *old = pm860x_reg_read(info->i2c, PM8607_CHG_CTRL2); + *old = (*old & 0x1f) * 50 + 50; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, data); + if (ret < 0) + return ret; + return 0; +} + +static int read_ccnt(struct pm860x_battery_info *info, int offset, + int *ccnt) +{ + unsigned char buf[2]; + int ret; + + ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7, offset & 7); + if (ret < 0) + goto out; + ret = pm860x_bulk_read(info->i2c, PM8607_CCNT_MEAS1, 2, buf); + if (ret < 0) + goto out; + *ccnt = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff); + return 0; +out: + return ret; +} + +static int calc_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt) +{ + unsigned int sum; + int ret; + int data; + + ret = read_ccnt(info, CCNT_POS1, &data); + if (ret) + goto out; + sum = data & 0xffff; + ret = read_ccnt(info, CCNT_POS2, &data); + if (ret) + goto out; + sum |= (data & 0xffff) << 16; + ccnt->pos += sum; + + ret = read_ccnt(info, CCNT_NEG1, &data); + if (ret) + goto out; + sum = data & 0xffff; + ret = read_ccnt(info, CCNT_NEG2, &data); + if (ret) + goto out; + sum |= (data & 0xffff) << 16; + sum = ~sum + 1; /* since it's negative */ + ccnt->neg += sum; + + ret = read_ccnt(info, CCNT_SPOS, &data); + if (ret) + goto out; + ccnt->spos += data; + ret = read_ccnt(info, CCNT_SNEG, &data); + if (ret) + goto out; + + /* + * charge(mAh) = count * 1.6984 * 1e(-8) + * = count * 16984 * 1.024 * 1.024 * 1.024 / (2 ^ 40) + * = count * 18236 / (2 ^ 40) + */ + ccnt->total_chg = (int) ((ccnt->pos * 18236) >> 40); + ccnt->total_dischg = (int) ((ccnt->neg * 18236) >> 40); + return 0; +out: + return ret; +} + +static int clear_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt) +{ + int data; + + memset(ccnt, 0, sizeof(*ccnt)); + /* read to clear ccnt */ + read_ccnt(info, CCNT_POS1, &data); + read_ccnt(info, CCNT_POS2, &data); + read_ccnt(info, CCNT_NEG1, &data); + read_ccnt(info, CCNT_NEG2, &data); + read_ccnt(info, CCNT_SPOS, &data); + read_ccnt(info, CCNT_SNEG, &data); + return 0; +} + +/* Calculate Open Circuit Voltage */ +static int calc_ocv(struct pm860x_battery_info *info, int *ocv) +{ + int ret; + int i; + int data; + int vbatt_avg; + int vbatt_sum; + int ibatt_avg; + int ibatt_sum; + + if (!ocv) + return -EINVAL; + + for (i = 0, ibatt_sum = 0, vbatt_sum = 0; i < 10; i++) { + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out; + vbatt_sum += data; + ret = measure_current(info, &data); + if (ret) + goto out; + ibatt_sum += data; + } + vbatt_avg = vbatt_sum / 10; + ibatt_avg = ibatt_sum / 10; + + mutex_lock(&info->lock); + if (info->present) + *ocv = vbatt_avg - ibatt_avg * info->resistor / 1000; + else + *ocv = vbatt_avg; + mutex_unlock(&info->lock); + dev_dbg(info->dev, "VBAT average:%d, OCV:%d\n", vbatt_avg, *ocv); + return 0; +out: + return ret; +} + +/* Calculate State of Charge (percent points) */ +static int calc_soc(struct pm860x_battery_info *info, int state, int *soc) +{ + int i; + int ocv; + int count; + int ret = -EINVAL; + + if (!soc) + return -EINVAL; + + switch (state) { + case OCV_MODE_ACTIVE: + ret = calc_ocv(info, &ocv); + break; + case OCV_MODE_SLEEP: + ret = measure_vbatt(info, OCV_MODE_SLEEP, &ocv); + break; + } + if (ret) + return ret; + + count = ARRAY_SIZE(array_soc); + if (ocv < array_soc[count - 1][0]) { + *soc = 0; + return 0; + } + + for (i = 0; i < count; i++) { + if (ocv >= array_soc[i][0]) { + *soc = array_soc[i][1]; + break; + } + } + return 0; +} + +static irqreturn_t pm860x_coulomb_handler(int irq, void *data) +{ + struct pm860x_battery_info *info = data; + + calc_ccnt(info, &ccnt_data); + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_batt_handler(int irq, void *data) +{ + struct pm860x_battery_info *info = data; + int ret; + + mutex_lock(&info->lock); + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret & STATUS2_BAT) { + info->present = 1; + info->temp_type = PM860X_TEMP_TBAT; + } else { + info->present = 0; + info->temp_type = PM860X_TEMP_TINT; + } + mutex_unlock(&info->lock); + /* clear ccnt since battery is attached or dettached */ + clear_ccnt(info, &ccnt_data); + return IRQ_HANDLED; +} + +static void pm860x_init_battery(struct pm860x_battery_info *info) +{ + unsigned char buf[2]; + int ret; + int data; + int bat_remove; + int soc; + + /* measure enable on GPADC1 */ + data = MEAS1_GP1; + if (info->temp_type == PM860X_TEMP_TINT) + data |= MEAS1_TINT; + ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN1, data, data); + if (ret) + goto out; + + /* measure enable on IBAT, BAT_DET, CC. IBAT is depend on CC. */ + data = MEAS3_IBAT | MEAS3_BAT_DET | MEAS3_CC; + ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN3, data, data); + if (ret) + goto out; + + /* measure disable CC in sleep time */ + ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME1, 0x82); + if (ret) + goto out; + ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME2, 0x6c); + if (ret) + goto out; + + /* enable GPADC */ + ret = pm860x_set_bits(info->i2c, PM8607_GPADC_MISC1, + GPMISC1_GPADC_EN, GPMISC1_GPADC_EN); + if (ret < 0) + goto out; + + /* detect battery via GPADC1 */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6, + CC6_BAT_DET_GPADC1, CC6_BAT_DET_GPADC1); + if (ret < 0) + goto out; + + ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7 << 3, + CCNT_AVG_SEL); + if (ret < 0) + goto out; + + /* set GPADC1 bias */ + ret = pm860x_set_bits(info->i2c, PM8607_GP_BIAS2, 0xF << 4, + GPBIAS2_GPADC1_SET); + if (ret < 0) + goto out; + + /* check whether battery present) */ + mutex_lock(&info->lock); + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret < 0) { + mutex_unlock(&info->lock); + goto out; + } + if (ret & STATUS2_BAT) { + info->present = 1; + info->temp_type = PM860X_TEMP_TBAT; + } else { + info->present = 0; + info->temp_type = PM860X_TEMP_TINT; + } + mutex_unlock(&info->lock); + + calc_soc(info, OCV_MODE_ACTIVE, &soc); + + data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG); + bat_remove = data & BAT_WU_LOG; + + dev_dbg(info->dev, "battery wake up? %s\n", + bat_remove != 0 ? "yes" : "no"); + + /* restore SOC from RTC domain register */ + if (bat_remove == 0) { + buf[0] = pm860x_reg_read(info->i2c, PM8607_RTC_MISC2); + buf[1] = pm860x_reg_read(info->i2c, PM8607_RTC1); + data = ((buf[1] & 0x3) << 5) | ((buf[0] >> 3) & 0x1F); + if (data > soc + 15) + info->start_soc = soc; + else if (data < soc - 15) + info->start_soc = soc; + else + info->start_soc = data; + dev_dbg(info->dev, "soc_rtc %d, soc_ocv :%d\n", data, soc); + } else { + pm860x_set_bits(info->i2c, PM8607_POWER_UP_LOG, + BAT_WU_LOG, BAT_WU_LOG); + info->start_soc = soc; + } + info->last_capacity = info->start_soc; + dev_dbg(info->dev, "init soc : %d\n", info->last_capacity); +out: + return; +} + +static void set_temp_threshold(struct pm860x_battery_info *info, + int min, int max) +{ + int data; + + /* (tmp << 8) / 1800 */ + if (min <= 0) + data = 0; + else + data = (min << 8) / 1800; + pm860x_reg_write(info->i2c, PM8607_GPADC1_HIGHTH, data); + dev_dbg(info->dev, "TEMP_HIGHTH : min: %d, 0x%x\n", min, data); + + if (max <= 0) + data = 0xff; + else + data = (max << 8) / 1800; + pm860x_reg_write(info->i2c, PM8607_GPADC1_LOWTH, data); + dev_dbg(info->dev, "TEMP_LOWTH:max : %d, 0x%x\n", max, data); +} + +static int measure_temp(struct pm860x_battery_info *info, int *data) +{ + int ret; + int temp; + int min; + int max; + + if (info->temp_type == PM860X_TEMP_TINT) { + ret = measure_12bit_voltage(info, PM8607_TINT_MEAS1, data); + if (ret) + return ret; + *data = (*data - 884) * 1000 / 3611; + } else { + ret = measure_12bit_voltage(info, PM8607_GPADC1_MEAS1, data); + if (ret) + return ret; + /* meausered Vtbat(mV) / Ibias_current(11uA)*/ + *data = (*data * 1000) / GPBIAS2_GPADC1_UA; + + if (*data > TBAT_NEG_25D) { + temp = -30; /* over cold , suppose -30 roughly */ + max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, 0, max); + } else if (*data > TBAT_NEG_10D) { + temp = -15; /* -15 degree, code */ + max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, 0, max); + } else if (*data > TBAT_0D) { + temp = -5; /* -5 degree */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_10D) { + temp = 5; /* in range of (0, 10) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_20D) { + temp = 15; /* in range of (10, 20) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_30D) { + temp = 25; /* in range of (20, 30) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_40D) { + temp = 35; /* in range of (30, 40) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else { + min = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, 0); + temp = 45; /* over heat ,suppose 45 roughly */ + } + + dev_dbg(info->dev, "temp_C:%d C,temp_mv:%d mv\n", temp, *data); + *data = temp; + } + return 0; +} + +static int calc_resistor(struct pm860x_battery_info *info) +{ + int vbatt_sum1; + int vbatt_sum2; + int chg_current; + int ibatt_sum1; + int ibatt_sum2; + int data; + int ret; + int i; + + ret = measure_current(info, &data); + /* make sure that charging is launched by data > 0 */ + if (ret || data < 0) + goto out; + + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out; + /* calculate resistor only in CC charge mode */ + if (data < VBATT_RESISTOR_MIN || data > VBATT_RESISTOR_MAX) + goto out; + + /* current is saved */ + if (set_charger_current(info, 500, &chg_current)) + goto out; + + /* + * set charge current as 500mA, wait about 500ms till charging + * process is launched and stable with the newer charging current. + */ + msleep(500); + + for (i = 0, vbatt_sum1 = 0, ibatt_sum1 = 0; i < 10; i++) { + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out_meas; + vbatt_sum1 += data; + ret = measure_current(info, &data); + if (ret) + goto out_meas; + + if (data < 0) + ibatt_sum1 = ibatt_sum1 - data; /* discharging */ + else + ibatt_sum1 = ibatt_sum1 + data; /* charging */ + } + + if (set_charger_current(info, 100, &ret)) + goto out_meas; + /* + * set charge current as 100mA, wait about 500ms till charging + * process is launched and stable with the newer charging current. + */ + msleep(500); + + for (i = 0, vbatt_sum2 = 0, ibatt_sum2 = 0; i < 10; i++) { + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out_meas; + vbatt_sum2 += data; + ret = measure_current(info, &data); + if (ret) + goto out_meas; + + if (data < 0) + ibatt_sum2 = ibatt_sum2 - data; /* discharging */ + else + ibatt_sum2 = ibatt_sum2 + data; /* charging */ + } + + /* restore current setting */ + if (set_charger_current(info, chg_current, &ret)) + goto out_meas; + + if ((vbatt_sum1 > vbatt_sum2) && (ibatt_sum1 > ibatt_sum2) && + (ibatt_sum2 > 0)) { + /* calculate resistor in discharging case */ + data = 1000 * (vbatt_sum1 - vbatt_sum2) + / (ibatt_sum1 - ibatt_sum2); + if ((data - info->resistor > 0) && + (data - info->resistor < info->resistor)) + info->resistor = data; + if ((info->resistor - data > 0) && + (info->resistor - data < data)) + info->resistor = data; + } + return 0; + +out_meas: + set_charger_current(info, chg_current, &ret); +out: + return -EINVAL; +} + +static int calc_capacity(struct pm860x_battery_info *info, int *cap) +{ + int ret; + int data; + int ibat; + int cap_ocv = 0; + int cap_cc = 0; + + ret = calc_ccnt(info, &ccnt_data); + if (ret) + goto out; +soc: + data = info->max_capacity * info->start_soc / 100; + if (ccnt_data.total_dischg - ccnt_data.total_chg <= data) { + cap_cc = + data + ccnt_data.total_chg - ccnt_data.total_dischg; + } else { + clear_ccnt(info, &ccnt_data); + calc_soc(info, OCV_MODE_ACTIVE, &info->start_soc); + dev_dbg(info->dev, "restart soc = %d !\n", + info->start_soc); + goto soc; + } + + cap_cc = cap_cc * 100 / info->max_capacity; + if (cap_cc < 0) + cap_cc = 0; + else if (cap_cc > 100) + cap_cc = 100; + + dev_dbg(info->dev, "%s, last cap : %d", __func__, + info->last_capacity); + + ret = measure_current(info, &ibat); + if (ret) + goto out; + /* Calculate the capacity when discharging(ibat < 0) */ + if (ibat < 0) { + ret = calc_soc(info, OCV_MODE_ACTIVE, &cap_ocv); + if (ret) + cap_ocv = info->last_capacity; + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out; + if (data <= LOW_BAT_THRESHOLD) { + /* choose the lower capacity value to report + * between vbat and CC when vbat < 3.6v; + * than 3.6v; + */ + *cap = min(cap_ocv, cap_cc); + } else { + /* when detect vbat > 3.6v, but cap_cc < 15,and + * cap_ocv is 10% larger than cap_cc, we can think + * CC have some accumulation error, switch to OCV + * to estimate capacity; + * */ + if (cap_cc < 15 && cap_ocv - cap_cc > 10) + *cap = cap_ocv; + else + *cap = cap_cc; + } + /* when discharging, make sure current capacity + * is lower than last*/ + if (*cap > info->last_capacity) + *cap = info->last_capacity; + } else { + *cap = cap_cc; + } + info->last_capacity = *cap; + + dev_dbg(info->dev, "%s, cap_ocv:%d cap_cc:%d, cap:%d\n", + (ibat < 0) ? "discharging" : "charging", + cap_ocv, cap_cc, *cap); + /* + * store the current capacity to RTC domain register, + * after next power up , it will be restored. + */ + pm860x_set_bits(info->i2c, PM8607_RTC_MISC2, RTC_SOC_5LSB, + (*cap & 0x1F) << 3); + pm860x_set_bits(info->i2c, PM8607_RTC1, RTC_SOC_3MSB, + ((*cap >> 5) & 0x3)); + return 0; +out: + return ret; +} + +static void pm860x_external_power_changed(struct power_supply *psy) +{ + struct pm860x_battery_info *info; + + info = container_of(psy, struct pm860x_battery_info, battery); + calc_resistor(info); +} + +static int pm860x_batt_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct pm860x_battery_info *info = dev_get_drvdata(psy->dev->parent); + int data; + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = info->present; + break; + case POWER_SUPPLY_PROP_CAPACITY: + ret = calc_capacity(info, &data); + if (ret) + return ret; + if (data < 0) + data = 0; + else if (data > 100) + data = 100; + /* return 100 if battery is not attached */ + if (!info->present) + data = 100; + val->intval = data; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + /* return real vbatt Voltage */ + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + return ret; + val->intval = data * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* return Open Circuit Voltage (not measured voltage) */ + ret = calc_ocv(info, &data); + if (ret) + return ret; + val->intval = data * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = measure_current(info, &data); + if (ret) + return ret; + val->intval = data; + break; + case POWER_SUPPLY_PROP_TEMP: + if (info->present) { + ret = measure_temp(info, &data); + if (ret) + return ret; + data *= 10; + } else { + /* Fake Temp 25C Without Battery */ + data = 250; + } + val->intval = data; + break; + default: + return -ENODEV; + } + return 0; +} + +static int pm860x_batt_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct pm860x_battery_info *info = dev_get_drvdata(psy->dev->parent); + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_FULL: + clear_ccnt(info, &ccnt_data); + info->start_soc = 100; + dev_dbg(info->dev, "chg done, update soc = %d\n", + info->start_soc); + break; + default: + return -EPERM; + } + + return 0; +} + + +static enum power_supply_property pm860x_batt_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_TEMP, +}; + +static __devinit int pm860x_battery_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_battery_info *info; + struct pm860x_power_pdata *pdata; + int ret; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->irq_cc = platform_get_irq(pdev, 0); + if (info->irq_cc <= 0) { + dev_err(&pdev->dev, "No IRQ resource!\n"); + ret = -EINVAL; + goto out; + } + + info->irq_batt = platform_get_irq(pdev, 1); + if (info->irq_batt <= 0) { + dev_err(&pdev->dev, "No IRQ resource!\n"); + ret = -EINVAL; + goto out; + } + + info->chip = chip; + info->i2c = + (chip->id == CHIP_PM8607) ? chip->client : chip->companion; + info->dev = &pdev->dev; + info->status = POWER_SUPPLY_STATUS_UNKNOWN; + pdata = pdev->dev.platform_data; + + mutex_init(&info->lock); + platform_set_drvdata(pdev, info); + + pm860x_init_battery(info); + + info->battery.name = "battery-monitor"; + info->battery.type = POWER_SUPPLY_TYPE_BATTERY; + info->battery.properties = pm860x_batt_props; + info->battery.num_properties = ARRAY_SIZE(pm860x_batt_props); + info->battery.get_property = pm860x_batt_get_prop; + info->battery.set_property = pm860x_batt_set_prop; + info->battery.external_power_changed = pm860x_external_power_changed; + + if (pdata && pdata->max_capacity) + info->max_capacity = pdata->max_capacity; + else + info->max_capacity = 1500; /* set default capacity */ + if (pdata && pdata->resistor) + info->resistor = pdata->resistor; + else + info->resistor = 300; /* set default internal resistor */ + + ret = power_supply_register(&pdev->dev, &info->battery); + if (ret) + goto out; + info->battery.dev->parent = &pdev->dev; + + ret = request_threaded_irq(info->irq_cc, NULL, + pm860x_coulomb_handler, IRQF_ONESHOT, + "coulomb", info); + if (ret < 0) { + dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", + info->irq_cc, ret); + goto out_reg; + } + + ret = request_threaded_irq(info->irq_batt, NULL, pm860x_batt_handler, + IRQF_ONESHOT, "battery", info); + if (ret < 0) { + dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", + info->irq_batt, ret); + goto out_coulomb; + } + + + return 0; + +out_coulomb: + free_irq(info->irq_cc, info); +out_reg: + power_supply_unregister(&info->battery); +out: + kfree(info); + return ret; +} + +static int __devexit pm860x_battery_remove(struct platform_device *pdev) +{ + struct pm860x_battery_info *info = platform_get_drvdata(pdev); + + power_supply_unregister(&info->battery); + free_irq(info->irq_batt, info); + free_irq(info->irq_cc, info); + kfree(info); + platform_set_drvdata(pdev, NULL); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pm860x_battery_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag |= 1 << PM8607_IRQ_CC; + return 0; +} + +static int pm860x_battery_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag &= ~(1 << PM8607_IRQ_CC); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_battery_pm_ops, + pm860x_battery_suspend, pm860x_battery_resume); + +static struct platform_driver pm860x_battery_driver = { + .driver = { + .name = "88pm860x-battery", + .owner = THIS_MODULE, + .pm = &pm860x_battery_pm_ops, + }, + .probe = pm860x_battery_probe, + .remove = __devexit_p(pm860x_battery_remove), +}; +module_platform_driver(pm860x_battery_driver); + +MODULE_DESCRIPTION("Marvell 88PM860x Battery driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/88pm860x_charger.c b/drivers/power/88pm860x_charger.c new file mode 100644 index 00000000000..2dbeb146090 --- /dev/null +++ b/drivers/power/88pm860x_charger.c @@ -0,0 +1,746 @@ +/* + * Battery driver for Marvell 88PM860x PMIC + * + * Copyright (c) 2012 Marvell International Ltd. + * Author: Jett Zhou <jtzhou@marvell.com> + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/power_supply.h> +#include <linux/mfd/88pm860x.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <asm/div64.h> + +/* bit definitions of Status Query Interface 2 */ +#define STATUS2_CHG (1 << 2) + +/* bit definitions of Reset Out Register */ +#define RESET_SW_PD (1 << 7) + +/* bit definitions of PreReg 1 */ +#define PREREG1_90MA (0x0) +#define PREREG1_180MA (0x1) +#define PREREG1_450MA (0x4) +#define PREREG1_540MA (0x5) +#define PREREG1_1350MA (0xE) +#define PREREG1_VSYS_4_5V (3 << 4) + +/* bit definitions of Charger Control 1 Register */ +#define CC1_MODE_OFF (0) +#define CC1_MODE_PRECHARGE (1) +#define CC1_MODE_FASTCHARGE (2) +#define CC1_MODE_PULSECHARGE (3) +#define CC1_ITERM_20MA (0 << 2) +#define CC1_ITERM_60MA (2 << 2) +#define CC1_VFCHG_4_2V (9 << 4) + +/* bit definitions of Charger Control 2 Register */ +#define CC2_ICHG_100MA (0x1) +#define CC2_ICHG_500MA (0x9) +#define CC2_ICHG_1000MA (0x13) + +/* bit definitions of Charger Control 3 Register */ +#define CC3_180MIN_TIMEOUT (0x6 << 4) +#define CC3_270MIN_TIMEOUT (0x7 << 4) +#define CC3_360MIN_TIMEOUT (0xA << 4) +#define CC3_DISABLE_TIMEOUT (0xF << 4) + +/* bit definitions of Charger Control 4 Register */ +#define CC4_IPRE_40MA (7) +#define CC4_VPCHG_3_2V (3 << 4) +#define CC4_IFCHG_MON_EN (1 << 6) +#define CC4_BTEMP_MON_EN (1 << 7) + +/* bit definitions of Charger Control 6 Register */ +#define CC6_BAT_OV_EN (1 << 2) +#define CC6_BAT_UV_EN (1 << 3) +#define CC6_UV_VBAT_SET (0x3 << 6) /* 2.8v */ + +/* bit definitions of Charger Control 7 Register */ +#define CC7_BAT_REM_EN (1 << 3) +#define CC7_IFSM_EN (1 << 7) + +/* bit definitions of Measurement Enable 1 Register */ +#define MEAS1_VBAT (1 << 0) + +/* bit definitions of Measurement Enable 3 Register */ +#define MEAS3_IBAT_EN (1 << 0) +#define MEAS3_CC_EN (1 << 2) + +#define FSM_INIT 0 +#define FSM_DISCHARGE 1 +#define FSM_PRECHARGE 2 +#define FSM_FASTCHARGE 3 + +#define PRECHARGE_THRESHOLD 3100 +#define POWEROFF_THRESHOLD 3400 +#define CHARGE_THRESHOLD 4000 +#define DISCHARGE_THRESHOLD 4180 + +/* over-temperature on PM8606 setting */ +#define OVER_TEMP_FLAG (1 << 6) +#define OVTEMP_AUTORECOVER (1 << 3) + +/* over-voltage protect on vchg setting mv */ +#define VCHG_NORMAL_LOW 4200 +#define VCHG_NORMAL_CHECK 5800 +#define VCHG_NORMAL_HIGH 6000 +#define VCHG_OVP_LOW 5500 + +struct pm860x_charger_info { + struct pm860x_chip *chip; + struct i2c_client *i2c; + struct i2c_client *i2c_8606; + struct device *dev; + + struct power_supply usb; + struct mutex lock; + int irq_nums; + int irq[7]; + unsigned state:3; /* fsm state */ + unsigned online:1; /* usb charger */ + unsigned present:1; /* battery present */ + unsigned allowed:1; +}; + +static char *pm860x_supplied_to[] = { + "battery-monitor", +}; + +static int measure_vchg(struct pm860x_charger_info *info, int *data) +{ + unsigned char buf[2]; + int ret = 0; + + ret = pm860x_bulk_read(info->i2c, PM8607_VCHG_MEAS1, 2, buf); + if (ret < 0) + return ret; + + *data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f); + /* V_BATT_MEAS(mV) = value * 5 * 1.8 * 1000 / (2^12) */ + *data = ((*data & 0xfff) * 9 * 125) >> 9; + + dev_dbg(info->dev, "%s, vchg: %d mv\n", __func__, *data); + + return ret; +} + +static void set_vchg_threshold(struct pm860x_charger_info *info, + int min, int max) +{ + int data; + + /* (tmp << 8) * / 5 / 1800 */ + if (min <= 0) + data = 0; + else + data = (min << 5) / 1125; + pm860x_reg_write(info->i2c, PM8607_VCHG_LOWTH, data); + dev_dbg(info->dev, "VCHG_LOWTH:%dmv, 0x%x\n", min, data); + + if (max <= 0) + data = 0xff; + else + data = (max << 5) / 1125; + pm860x_reg_write(info->i2c, PM8607_VCHG_HIGHTH, data); + dev_dbg(info->dev, "VCHG_HIGHTH:%dmv, 0x%x\n", max, data); + +} + +static void set_vbatt_threshold(struct pm860x_charger_info *info, + int min, int max) +{ + int data; + + /* (tmp << 8) * 3 / 1800 */ + if (min <= 0) + data = 0; + else + data = (min << 5) / 675; + pm860x_reg_write(info->i2c, PM8607_VBAT_LOWTH, data); + dev_dbg(info->dev, "VBAT Min:%dmv, LOWTH:0x%x\n", min, data); + + if (max <= 0) + data = 0xff; + else + data = (max << 5) / 675; + pm860x_reg_write(info->i2c, PM8607_VBAT_HIGHTH, data); + dev_dbg(info->dev, "VBAT Max:%dmv, HIGHTH:0x%x\n", max, data); + + return; +} + +static int start_precharge(struct pm860x_charger_info *info) +{ + int ret; + + dev_dbg(info->dev, "Start Pre-charging!\n"); + set_vbatt_threshold(info, 0, 0); + + ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA, + PREREG1_1350MA | PREREG1_VSYS_4_5V); + if (ret < 0) + goto out; + /* stop charging */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, + CC1_MODE_OFF); + if (ret < 0) + goto out; + /* set 270 minutes timeout */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4), + CC3_270MIN_TIMEOUT); + if (ret < 0) + goto out; + /* set precharge current, termination voltage, IBAT & TBAT monitor */ + ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL4, + CC4_IPRE_40MA | CC4_VPCHG_3_2V | + CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN); + if (ret < 0) + goto out; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7, + CC7_BAT_REM_EN | CC7_IFSM_EN, + CC7_BAT_REM_EN | CC7_IFSM_EN); + if (ret < 0) + goto out; + /* trigger precharge */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, + CC1_MODE_PRECHARGE); +out: + return ret; +} + +static int start_fastcharge(struct pm860x_charger_info *info) +{ + int ret; + + dev_dbg(info->dev, "Start Fast-charging!\n"); + + /* set fastcharge termination current & voltage, disable charging */ + ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL1, + CC1_MODE_OFF | CC1_ITERM_60MA | + CC1_VFCHG_4_2V); + if (ret < 0) + goto out; + ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA, + PREREG1_540MA | PREREG1_VSYS_4_5V); + if (ret < 0) + goto out; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, + CC2_ICHG_500MA); + if (ret < 0) + goto out; + /* set 270 minutes timeout */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4), + CC3_270MIN_TIMEOUT); + if (ret < 0) + goto out; + /* set IBAT & TBAT monitor */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL4, + CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN, + CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN); + if (ret < 0) + goto out; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6, + CC6_BAT_OV_EN | CC6_BAT_UV_EN | + CC6_UV_VBAT_SET, + CC6_BAT_OV_EN | CC6_BAT_UV_EN | + CC6_UV_VBAT_SET); + if (ret < 0) + goto out; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7, + CC7_BAT_REM_EN | CC7_IFSM_EN, + CC7_BAT_REM_EN | CC7_IFSM_EN); + if (ret < 0) + goto out; + /* launch fast-charge */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, + CC1_MODE_FASTCHARGE); + /* vchg threshold setting */ + set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_NORMAL_HIGH); +out: + return ret; +} + +static void stop_charge(struct pm860x_charger_info *info, int vbatt) +{ + dev_dbg(info->dev, "Stop charging!\n"); + pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, CC1_MODE_OFF); + if (vbatt > CHARGE_THRESHOLD && info->online) + set_vbatt_threshold(info, CHARGE_THRESHOLD, 0); +} + +static void power_off_notification(struct pm860x_charger_info *info) +{ + dev_dbg(info->dev, "Power-off notification!\n"); +} + +static int set_charging_fsm(struct pm860x_charger_info *info) +{ + struct power_supply *psy; + union power_supply_propval data; + unsigned char fsm_state[][16] = { "init", "discharge", "precharge", + "fastcharge", + }; + int ret; + int vbatt; + + psy = power_supply_get_by_name(pm860x_supplied_to[0]); + if (!psy) + return -EINVAL; + ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &data); + if (ret) + return ret; + vbatt = data.intval / 1000; + + ret = psy->get_property(psy, POWER_SUPPLY_PROP_PRESENT, &data); + if (ret) + return ret; + + mutex_lock(&info->lock); + info->present = data.intval; + + dev_dbg(info->dev, "Entering FSM:%s, Charger:%s, Battery:%s, " + "Allowed:%d\n", + &fsm_state[info->state][0], + (info->online) ? "online" : "N/A", + (info->present) ? "present" : "N/A", info->allowed); + dev_dbg(info->dev, "set_charging_fsm:vbatt:%d(mV)\n", vbatt); + + switch (info->state) { + case FSM_INIT: + if (info->online && info->present && info->allowed) { + if (vbatt < PRECHARGE_THRESHOLD) { + info->state = FSM_PRECHARGE; + start_precharge(info); + } else if (vbatt > DISCHARGE_THRESHOLD) { + info->state = FSM_DISCHARGE; + stop_charge(info, vbatt); + } else if (vbatt < DISCHARGE_THRESHOLD) { + info->state = FSM_FASTCHARGE; + start_fastcharge(info); + } + } else { + if (vbatt < POWEROFF_THRESHOLD) { + power_off_notification(info); + } else { + info->state = FSM_DISCHARGE; + stop_charge(info, vbatt); + } + } + break; + case FSM_PRECHARGE: + if (info->online && info->present && info->allowed) { + if (vbatt > PRECHARGE_THRESHOLD) { + info->state = FSM_FASTCHARGE; + start_fastcharge(info); + } + } else { + info->state = FSM_DISCHARGE; + stop_charge(info, vbatt); + } + break; + case FSM_FASTCHARGE: + if (info->online && info->present && info->allowed) { + if (vbatt < PRECHARGE_THRESHOLD) { + info->state = FSM_PRECHARGE; + start_precharge(info); + } + } else { + info->state = FSM_DISCHARGE; + stop_charge(info, vbatt); + } + break; + case FSM_DISCHARGE: + if (info->online && info->present && info->allowed) { + if (vbatt < PRECHARGE_THRESHOLD) { + info->state = FSM_PRECHARGE; + start_precharge(info); + } else if (vbatt < DISCHARGE_THRESHOLD) { + info->state = FSM_FASTCHARGE; + start_fastcharge(info); + } + } else { + if (vbatt < POWEROFF_THRESHOLD) + power_off_notification(info); + else if (vbatt > CHARGE_THRESHOLD && info->online) + set_vbatt_threshold(info, CHARGE_THRESHOLD, 0); + } + break; + default: + dev_warn(info->dev, "FSM meets wrong state:%d\n", + info->state); + break; + } + dev_dbg(info->dev, + "Out FSM:%s, Charger:%s, Battery:%s, Allowed:%d\n", + &fsm_state[info->state][0], + (info->online) ? "online" : "N/A", + (info->present) ? "present" : "N/A", info->allowed); + mutex_unlock(&info->lock); + + return 0; +} + +static irqreturn_t pm860x_charger_handler(int irq, void *data) +{ + struct pm860x_charger_info *info = data; + int ret; + + mutex_lock(&info->lock); + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret < 0) { + mutex_unlock(&info->lock); + goto out; + } + if (ret & STATUS2_CHG) { + info->online = 1; + info->allowed = 1; + } else { + info->online = 0; + info->allowed = 0; + } + mutex_unlock(&info->lock); + dev_dbg(info->dev, "%s, Charger:%s, Allowed:%d\n", __func__, + (info->online) ? "online" : "N/A", info->allowed); + + set_charging_fsm(info); + + power_supply_changed(&info->usb); +out: + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_temp_handler(int irq, void *data) +{ + struct power_supply *psy; + struct pm860x_charger_info *info = data; + union power_supply_propval temp; + int value; + int ret; + + psy = power_supply_get_by_name(pm860x_supplied_to[0]); + if (!psy) + goto out; + ret = psy->get_property(psy, POWER_SUPPLY_PROP_TEMP, &temp); + if (ret) + goto out; + value = temp.intval / 10; + + mutex_lock(&info->lock); + /* Temperature < -10 C or >40 C, Will not allow charge */ + if (value < -10 || value > 40) + info->allowed = 0; + else + info->allowed = 1; + dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); + mutex_unlock(&info->lock); + + set_charging_fsm(info); +out: + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_exception_handler(int irq, void *data) +{ + struct pm860x_charger_info *info = data; + + mutex_lock(&info->lock); + info->allowed = 0; + mutex_unlock(&info->lock); + dev_dbg(info->dev, "%s, irq: %d\n", __func__, irq); + + set_charging_fsm(info); + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_done_handler(int irq, void *data) +{ + struct pm860x_charger_info *info = data; + struct power_supply *psy; + union power_supply_propval val; + int ret; + int vbatt; + + mutex_lock(&info->lock); + /* pre-charge done, will transimit to fast-charge stage */ + if (info->state == FSM_PRECHARGE) { + info->allowed = 1; + goto out; + } + /* + * Fast charge done, delay to read + * the correct status of CHG_DET. + */ + mdelay(5); + info->allowed = 0; + psy = power_supply_get_by_name(pm860x_supplied_to[0]); + if (!psy) + goto out; + ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &val); + if (ret) + goto out; + vbatt = val.intval / 1000; + /* + * CHG_DONE interrupt is faster than CHG_DET interrupt when + * plug in/out usb, So we can not rely on info->online, we + * need check pm8607 status register to check usb is online + * or not, then we can decide it is real charge done + * automatically or it is triggered by usb plug out; + */ + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret < 0) + goto out; + if (vbatt > CHARGE_THRESHOLD && ret & STATUS2_CHG) + psy->set_property(psy, POWER_SUPPLY_PROP_CHARGE_FULL, &val); + +out: + mutex_unlock(&info->lock); + dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); + set_charging_fsm(info); + + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_vbattery_handler(int irq, void *data) +{ + struct pm860x_charger_info *info = data; + + mutex_lock(&info->lock); + + set_vbatt_threshold(info, 0, 0); + + if (info->present && info->online) + info->allowed = 1; + else + info->allowed = 0; + mutex_unlock(&info->lock); + dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); + + set_charging_fsm(info); + + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_vchg_handler(int irq, void *data) +{ + struct pm860x_charger_info *info = data; + int vchg = 0; + + if (info->present) + goto out; + + measure_vchg(info, &vchg); + + mutex_lock(&info->lock); + if (!info->online) { + int status; + /* check if over-temp on pm8606 or not */ + status = pm860x_reg_read(info->i2c_8606, PM8606_FLAGS); + if (status & OVER_TEMP_FLAG) { + /* clear over temp flag and set auto recover */ + pm860x_set_bits(info->i2c_8606, PM8606_FLAGS, + OVER_TEMP_FLAG, OVER_TEMP_FLAG); + pm860x_set_bits(info->i2c_8606, + PM8606_VSYS, + OVTEMP_AUTORECOVER, + OVTEMP_AUTORECOVER); + dev_dbg(info->dev, + "%s, pm8606 over-temp occure\n", __func__); + } + } + + if (vchg > VCHG_NORMAL_CHECK) { + set_vchg_threshold(info, VCHG_OVP_LOW, 0); + info->allowed = 0; + dev_dbg(info->dev, + "%s,pm8607 over-vchg occure,vchg = %dmv\n", + __func__, vchg); + } else if (vchg < VCHG_OVP_LOW) { + set_vchg_threshold(info, VCHG_NORMAL_LOW, + VCHG_NORMAL_HIGH); + info->allowed = 1; + dev_dbg(info->dev, + "%s,pm8607 over-vchg recover,vchg = %dmv\n", + __func__, vchg); + } + mutex_unlock(&info->lock); + + dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); + set_charging_fsm(info); +out: + return IRQ_HANDLED; +} + +static int pm860x_usb_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct pm860x_charger_info *info = + dev_get_drvdata(psy->dev->parent); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (info->state == FSM_FASTCHARGE || + info->state == FSM_PRECHARGE) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = info->online; + break; + default: + return -ENODEV; + } + return 0; +} + +static enum power_supply_property pm860x_usb_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, +}; + +static int pm860x_init_charger(struct pm860x_charger_info *info) +{ + int ret; + + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret < 0) + return ret; + + mutex_lock(&info->lock); + info->state = FSM_INIT; + if (ret & STATUS2_CHG) { + info->online = 1; + info->allowed = 1; + } else { + info->online = 0; + info->allowed = 0; + } + mutex_unlock(&info->lock); + + set_charging_fsm(info); + return 0; +} + +static struct pm860x_irq_desc { + const char *name; + irqreturn_t (*handler)(int irq, void *data); +} pm860x_irq_descs[] = { + { "usb supply detect", pm860x_charger_handler }, + { "charge done", pm860x_done_handler }, + { "charge timeout", pm860x_exception_handler }, + { "charge fault", pm860x_exception_handler }, + { "temperature", pm860x_temp_handler }, + { "vbatt", pm860x_vbattery_handler }, + { "vchg", pm860x_vchg_handler }, +}; + +static __devinit int pm860x_charger_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_charger_info *info; + int ret; + int count; + int i; + int j; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + count = pdev->num_resources; + for (i = 0, j = 0; i < count; i++) { + info->irq[j] = platform_get_irq(pdev, i); + if (info->irq[j] < 0) + continue; + j++; + } + info->irq_nums = j; + + info->chip = chip; + info->i2c = + (chip->id == CHIP_PM8607) ? chip->client : chip->companion; + info->i2c_8606 = + (chip->id == CHIP_PM8607) ? chip->companion : chip->client; + if (!info->i2c_8606) { + dev_err(&pdev->dev, "Missed I2C address of 88PM8606!\n"); + ret = -EINVAL; + goto out; + } + info->dev = &pdev->dev; + + /* set init value for the case we are not using battery */ + set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_OVP_LOW); + + mutex_init(&info->lock); + platform_set_drvdata(pdev, info); + + info->usb.name = "usb"; + info->usb.type = POWER_SUPPLY_TYPE_USB; + info->usb.supplied_to = pm860x_supplied_to; + info->usb.num_supplicants = ARRAY_SIZE(pm860x_supplied_to); + info->usb.properties = pm860x_usb_props; + info->usb.num_properties = ARRAY_SIZE(pm860x_usb_props); + info->usb.get_property = pm860x_usb_get_prop; + ret = power_supply_register(&pdev->dev, &info->usb); + if (ret) + goto out; + + pm860x_init_charger(info); + + for (i = 0; i < ARRAY_SIZE(info->irq); i++) { + ret = request_threaded_irq(info->irq[i], NULL, + pm860x_irq_descs[i].handler, + IRQF_ONESHOT, pm860x_irq_descs[i].name, info); + if (ret < 0) { + dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", + info->irq[i], ret); + goto out_irq; + } + } + return 0; + +out_irq: + while (--i >= 0) + free_irq(info->irq[i], info); +out: + kfree(info); + return ret; +} + +static int __devexit pm860x_charger_remove(struct platform_device *pdev) +{ + struct pm860x_charger_info *info = platform_get_drvdata(pdev); + int i; + + platform_set_drvdata(pdev, NULL); + power_supply_unregister(&info->usb); + free_irq(info->irq[0], info); + for (i = 0; i < info->irq_nums; i++) + free_irq(info->irq[i], info); + kfree(info); + return 0; +} + +static struct platform_driver pm860x_charger_driver = { + .driver = { + .name = "88pm860x-charger", + .owner = THIS_MODULE, + }, + .probe = pm860x_charger_probe, + .remove = __devexit_p(pm860x_charger_remove), +}; +module_platform_driver(pm860x_charger_driver); + +MODULE_DESCRIPTION("Marvell 88PM860x Charger driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 80978196aae..49a89397231 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -69,6 +69,12 @@ config TEST_POWER help This driver is used for testing. It's safe to say M here. +config BATTERY_88PM860X + tristate "Marvell 88PM860x battery driver" + depends on MFD_88PM860X + help + Say Y here to enable battery monitor for Marvell 88PM860x chip. + config BATTERY_DS2760 tristate "DS2760 battery driver (HP iPAQ & others)" depends on W1 && W1_SLAVE_DS2760 @@ -174,7 +180,6 @@ config BATTERY_DA9030 config BATTERY_DA9052 tristate "Dialog DA9052 Battery" depends on PMIC_DA9052 - depends on BROKEN help Say Y here to enable support for batteries charger integrated into DA9052 PMIC. @@ -210,6 +215,12 @@ config BATTERY_S3C_ADC help Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery +config CHARGER_88PM860X + tristate "Marvell 88PM860x Charger driver" + depends on MFD_88PM860X && BATTERY_88PM860X + help + Say Y here to enable charger for Marvell 88PM860x chip. + config CHARGER_PCF50633 tristate "NXP PCF50633 MBC" depends on MFD_PCF50633 @@ -262,6 +273,13 @@ config CHARGER_LP8727 help Say Y here to enable support for LP8727 Charger Driver. +config CHARGER_LP8788 + tristate "TI LP8788 charger driver" + depends on MFD_LP8788 + depends on LP8788_ADC + help + Say Y to enable support for the LP8788 linear charger. + config CHARGER_GPIO tristate "GPIO charger" depends on GPIOLIB diff --git a/drivers/power/Makefile b/drivers/power/Makefile index e0b4d4284e1..b949cf85590 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_WM831X_POWER) += wm831x_power.o obj-$(CONFIG_WM8350_POWER) += wm8350_power.o obj-$(CONFIG_TEST_POWER) += test_power.o +obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o @@ -32,6 +33,7 @@ obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o obj-$(CONFIG_BATTERY_Z2) += z2_battery.o obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o +obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o @@ -40,6 +42,7 @@ obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o obj-$(CONFIG_CHARGER_LP8727) += lp8727_charger.o +obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index 3041514f4d3..e3b6395b20d 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -1014,6 +1014,7 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev) create_singlethread_workqueue("ab8500_btemp_wq"); if (di->btemp_wq == NULL) { dev_err(di->dev, "failed to create work queue\n"); + ret = -ENOMEM; goto free_device_info; } diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index 0701dbc2b7e..26ff759e222 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -2614,6 +2614,7 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) create_singlethread_workqueue("ab8500_charger_wq"); if (di->charger_wq == NULL) { dev_err(di->dev, "failed to create work queue\n"); + ret = -ENOMEM; goto free_device_info; } diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index 5c9e7c263c3..2db8cc25439 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -2506,6 +2506,7 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev) di->fg_wq = create_singlethread_workqueue("ab8500_fg_wq"); if (di->fg_wq == NULL) { dev_err(di->dev, "failed to create work queue\n"); + ret = -ENOMEM; goto free_device_info; } diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index 181ddece518..5860d4dfbe9 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -814,7 +814,8 @@ static int bq27x00_battery_probe(struct i2c_client *client, di->bat.name = name; di->bus.read = &bq27x00_read_i2c; - if (bq27x00_powersupply_init(di)) + retval = bq27x00_powersupply_init(di); + if (retval) goto batt_failed_3; i2c_set_clientdata(client, di); diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c index 7ff83cf43c8..8a0aca6364c 100644 --- a/drivers/power/charger-manager.c +++ b/drivers/power/charger-manager.c @@ -22,6 +22,7 @@ #include <linux/platform_device.h> #include <linux/power/charger-manager.h> #include <linux/regulator/consumer.h> +#include <linux/sysfs.h> static const char * const default_event_names[] = { [CM_EVENT_UNKNOWN] = "Unknown", @@ -227,6 +228,58 @@ static bool is_charging(struct charger_manager *cm) } /** + * is_full_charged - Returns true if the battery is fully charged. + * @cm: the Charger Manager representing the battery. + */ +static bool is_full_charged(struct charger_manager *cm) +{ + struct charger_desc *desc = cm->desc; + union power_supply_propval val; + int ret = 0; + int uV; + + /* If there is no battery, it cannot be charged */ + if (!is_batt_present(cm)) { + val.intval = 0; + goto out; + } + + if (cm->fuel_gauge && desc->fullbatt_full_capacity > 0) { + /* Not full if capacity of fuel gauge isn't full */ + ret = cm->fuel_gauge->get_property(cm->fuel_gauge, + POWER_SUPPLY_PROP_CHARGE_FULL, &val); + if (!ret && val.intval > desc->fullbatt_full_capacity) { + val.intval = 1; + goto out; + } + } + + /* Full, if it's over the fullbatt voltage */ + if (desc->fullbatt_uV > 0) { + ret = get_batt_uV(cm, &uV); + if (!ret && uV >= desc->fullbatt_uV) { + val.intval = 1; + goto out; + } + } + + /* Full, if the capacity is more than fullbatt_soc */ + if (cm->fuel_gauge && desc->fullbatt_soc > 0) { + ret = cm->fuel_gauge->get_property(cm->fuel_gauge, + POWER_SUPPLY_PROP_CAPACITY, &val); + if (!ret && val.intval >= desc->fullbatt_soc) { + val.intval = 1; + goto out; + } + } + + val.intval = 0; + +out: + return val.intval ? true : false; +} + +/** * is_polling_required - Return true if need to continue polling for this CM. * @cm: the Charger Manager representing the battery. */ @@ -271,10 +324,46 @@ static int try_charger_enable(struct charger_manager *cm, bool enable) if (enable) { if (cm->emergency_stop) return -EAGAIN; - for (i = 0 ; i < desc->num_charger_regulators ; i++) - regulator_enable(desc->charger_regulators[i].consumer); + + /* + * Save start time of charging to limit + * maximum possible charging time. + */ + cm->charging_start_time = ktime_to_ms(ktime_get()); + cm->charging_end_time = 0; + + for (i = 0 ; i < desc->num_charger_regulators ; i++) { + if (desc->charger_regulators[i].externally_control) + continue; + + err = regulator_enable(desc->charger_regulators[i].consumer); + if (err < 0) { + dev_warn(cm->dev, + "Cannot enable %s regulator\n", + desc->charger_regulators[i].regulator_name); + } + } } else { /* + * Save end time of charging to maintain fully charged state + * of battery after full-batt. + */ + cm->charging_start_time = 0; + cm->charging_end_time = ktime_to_ms(ktime_get()); + + for (i = 0 ; i < desc->num_charger_regulators ; i++) { + if (desc->charger_regulators[i].externally_control) + continue; + + err = regulator_disable(desc->charger_regulators[i].consumer); + if (err < 0) { + dev_warn(cm->dev, + "Cannot disable %s regulator\n", + desc->charger_regulators[i].regulator_name); + } + } + + /* * Abnormal battery state - Stop charging forcibly, * even if charger was enabled at the other places */ @@ -400,15 +489,62 @@ static void fullbatt_vchk(struct work_struct *work) return; } - diff = cm->fullbatt_vchk_uV; + diff = desc->fullbatt_uV; diff -= batt_uV; - dev_dbg(cm->dev, "VBATT dropped %duV after full-batt.\n", diff); + dev_info(cm->dev, "VBATT dropped %duV after full-batt.\n", diff); if (diff > desc->fullbatt_vchkdrop_uV) { try_charger_restart(cm); - uevent_notify(cm, "Recharge"); + uevent_notify(cm, "Recharging"); + } +} + +/** + * check_charging_duration - Monitor charging/discharging duration + * @cm: the Charger Manager representing the battery. + * + * If whole charging duration exceed 'charging_max_duration_ms', + * cm stop charging to prevent overcharge/overheat. If discharging + * duration exceed 'discharging _max_duration_ms', charger cable is + * attached, after full-batt, cm start charging to maintain fully + * charged state for battery. + */ +static int check_charging_duration(struct charger_manager *cm) +{ + struct charger_desc *desc = cm->desc; + u64 curr = ktime_to_ms(ktime_get()); + u64 duration; + int ret = false; + + if (!desc->charging_max_duration_ms && + !desc->discharging_max_duration_ms) + return ret; + + if (cm->charger_enabled) { + duration = curr - cm->charging_start_time; + + if (duration > desc->charging_max_duration_ms) { + dev_info(cm->dev, "Charging duration exceed %lldms", + desc->charging_max_duration_ms); + uevent_notify(cm, "Discharging"); + try_charger_enable(cm, false); + ret = true; + } + } else if (is_ext_pwr_online(cm) && !cm->charger_enabled) { + duration = curr - cm->charging_end_time; + + if (duration > desc->charging_max_duration_ms && + is_ext_pwr_online(cm)) { + dev_info(cm->dev, "DisCharging duration exceed %lldms", + desc->discharging_max_duration_ms); + uevent_notify(cm, "Recharing"); + try_charger_enable(cm, true); + ret = true; + } } + + return ret; } /** @@ -426,10 +562,14 @@ static bool _cm_monitor(struct charger_manager *cm) dev_dbg(cm->dev, "monitoring (%2.2d.%3.3dC)\n", cm->last_temp_mC / 1000, cm->last_temp_mC % 1000); - /* It has been stopped or charging already */ - if (!!temp == !!cm->emergency_stop) + /* It has been stopped already */ + if (temp && cm->emergency_stop) return false; + /* + * Check temperature whether overheat or cold. + * If temperature is out of range normal state, stop charging. + */ if (temp) { cm->emergency_stop = temp; if (!try_charger_enable(cm, false)) { @@ -438,10 +578,41 @@ static bool _cm_monitor(struct charger_manager *cm) else uevent_notify(cm, "COLD"); } + + /* + * Check whole charging duration and discharing duration + * after full-batt. + */ + } else if (!cm->emergency_stop && check_charging_duration(cm)) { + dev_dbg(cm->dev, + "Charging/Discharging duration is out of range"); + /* + * Check dropped voltage of battery. If battery voltage is more + * dropped than fullbatt_vchkdrop_uV after fully charged state, + * charger-manager have to recharge battery. + */ + } else if (!cm->emergency_stop && is_ext_pwr_online(cm) && + !cm->charger_enabled) { + fullbatt_vchk(&cm->fullbatt_vchk_work.work); + + /* + * Check whether fully charged state to protect overcharge + * if charger-manager is charging for battery. + */ + } else if (!cm->emergency_stop && is_full_charged(cm) && + cm->charger_enabled) { + dev_info(cm->dev, "EVENT_HANDLE: Battery Fully Charged.\n"); + uevent_notify(cm, default_event_names[CM_EVENT_BATT_FULL]); + + try_charger_enable(cm, false); + + fullbatt_vchk(&cm->fullbatt_vchk_work.work); } else { cm->emergency_stop = 0; - if (!try_charger_enable(cm, true)) - uevent_notify(cm, "CHARGING"); + if (is_ext_pwr_online(cm)) { + if (!try_charger_enable(cm, true)) + uevent_notify(cm, "CHARGING"); + } } return true; @@ -701,47 +872,10 @@ static int charger_get_property(struct power_supply *psy, val->intval = 0; break; case POWER_SUPPLY_PROP_CHARGE_FULL: - if (cm->fuel_gauge) { - if (cm->fuel_gauge->get_property(cm->fuel_gauge, - POWER_SUPPLY_PROP_CHARGE_FULL, val) == 0) - break; - } - - if (is_ext_pwr_online(cm)) { - /* Not full if it's charging. */ - if (is_charging(cm)) { - val->intval = 0; - break; - } - /* - * Full if it's powered but not charging andi - * not forced stop by emergency - */ - if (!cm->emergency_stop) { - val->intval = 1; - break; - } - } - - /* Full if it's over the fullbatt voltage */ - ret = get_batt_uV(cm, &uV); - if (!ret && desc->fullbatt_uV > 0 && uV >= desc->fullbatt_uV && - !is_charging(cm)) { + if (is_full_charged(cm)) val->intval = 1; - break; - } - - /* Full if the cap is 100 */ - if (cm->fuel_gauge) { - ret = cm->fuel_gauge->get_property(cm->fuel_gauge, - POWER_SUPPLY_PROP_CAPACITY, val); - if (!ret && val->intval >= 100 && !is_charging(cm)) { - val->intval = 1; - break; - } - } - - val->intval = 0; + else + val->intval = 0; ret = 0; break; case POWER_SUPPLY_PROP_CHARGE_NOW: @@ -1031,7 +1165,26 @@ static int charger_extcon_notifier(struct notifier_block *self, struct charger_cable *cable = container_of(self, struct charger_cable, nb); + /* + * The newly state of charger cable. + * If cable is attached, cable->attached is true. + */ cable->attached = event; + + /* + * Setup monitoring to check battery state + * when charger cable is attached. + */ + if (cable->attached && is_polling_required(cable->cm)) { + if (work_pending(&setup_polling)) + cancel_work_sync(&setup_polling); + schedule_work(&setup_polling); + } + + /* + * Setup work for controlling charger(regulator) + * according to charger cable. + */ schedule_work(&cable->wq); return NOTIFY_DONE; @@ -1068,12 +1221,101 @@ static int charger_extcon_init(struct charger_manager *cm, return ret; } +/* help function of sysfs node to control charger(regulator) */ +static ssize_t charger_name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct charger_regulator *charger + = container_of(attr, struct charger_regulator, attr_name); + + return sprintf(buf, "%s\n", charger->regulator_name); +} + +static ssize_t charger_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct charger_regulator *charger + = container_of(attr, struct charger_regulator, attr_state); + int state = 0; + + if (!charger->externally_control) + state = regulator_is_enabled(charger->consumer); + + return sprintf(buf, "%s\n", state ? "enabled" : "disabled"); +} + +static ssize_t charger_externally_control_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct charger_regulator *charger = container_of(attr, + struct charger_regulator, attr_externally_control); + + return sprintf(buf, "%d\n", charger->externally_control); +} + +static ssize_t charger_externally_control_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct charger_regulator *charger + = container_of(attr, struct charger_regulator, + attr_externally_control); + struct charger_manager *cm = charger->cm; + struct charger_desc *desc = cm->desc; + int i; + int ret; + int externally_control; + int chargers_externally_control = 1; + + ret = sscanf(buf, "%d", &externally_control); + if (ret == 0) { + ret = -EINVAL; + return ret; + } + + if (!externally_control) { + charger->externally_control = 0; + return count; + } + + for (i = 0; i < desc->num_charger_regulators; i++) { + if (&desc->charger_regulators[i] != charger && + !desc->charger_regulators[i].externally_control) { + /* + * At least, one charger is controlled by + * charger-manager + */ + chargers_externally_control = 0; + break; + } + } + + if (!chargers_externally_control) { + if (cm->charger_enabled) { + try_charger_enable(charger->cm, false); + charger->externally_control = externally_control; + try_charger_enable(charger->cm, true); + } else { + charger->externally_control = externally_control; + } + } else { + dev_warn(cm->dev, + "'%s' regulator should be controlled " + "in charger-manager because charger-manager " + "must need at least one charger for charging\n", + charger->regulator_name); + } + + return count; +} + static int charger_manager_probe(struct platform_device *pdev) { struct charger_desc *desc = dev_get_platdata(&pdev->dev); struct charger_manager *cm; int ret = 0, i = 0; int j = 0; + int chargers_externally_control = 1; union power_supply_propval val; if (g_desc && !rtc_dev && g_desc->rtc_name) { @@ -1125,6 +1367,15 @@ static int charger_manager_probe(struct platform_device *pdev) desc->fullbatt_vchkdrop_ms = 0; desc->fullbatt_vchkdrop_uV = 0; } + if (desc->fullbatt_soc == 0) { + dev_info(&pdev->dev, "Ignoring full-battery soc(state of" + " charge) threshold as it is not" + " supplied."); + } + if (desc->fullbatt_full_capacity == 0) { + dev_info(&pdev->dev, "Ignoring full-battery full capacity" + " threshold as it is not supplied."); + } if (!desc->charger_regulators || desc->num_charger_regulators < 1) { ret = -EINVAL; @@ -1182,6 +1433,15 @@ static int charger_manager_probe(struct platform_device *pdev) goto err_chg_stat; } + if (!desc->charging_max_duration_ms || + !desc->discharging_max_duration_ms) { + dev_info(&pdev->dev, "Cannot limit charging duration " + "checking mechanism to prevent overcharge/overheat " + "and control discharging duration"); + desc->charging_max_duration_ms = 0; + desc->discharging_max_duration_ms = 0; + } + platform_set_drvdata(pdev, cm); memcpy(&cm->charger_psy, &psy_default, sizeof(psy_default)); @@ -1245,6 +1505,8 @@ static int charger_manager_probe(struct platform_device *pdev) for (i = 0 ; i < desc->num_charger_regulators ; i++) { struct charger_regulator *charger = &desc->charger_regulators[i]; + char buf[11]; + char *str; charger->consumer = regulator_get(&pdev->dev, charger->regulator_name); @@ -1254,6 +1516,7 @@ static int charger_manager_probe(struct platform_device *pdev) ret = -EINVAL; goto err_chg_get; } + charger->cm = cm; for (j = 0 ; j < charger->num_cables ; j++) { struct charger_cable *cable = &charger->cables[j]; @@ -1267,6 +1530,71 @@ static int charger_manager_probe(struct platform_device *pdev) cable->charger = charger; cable->cm = cm; } + + /* Create sysfs entry to control charger(regulator) */ + snprintf(buf, 10, "charger.%d", i); + str = kzalloc(sizeof(char) * (strlen(buf) + 1), GFP_KERNEL); + if (!str) { + for (i--; i >= 0; i--) { + charger = &desc->charger_regulators[i]; + kfree(charger->attr_g.name); + } + ret = -ENOMEM; + + goto err_extcon; + } + strcpy(str, buf); + + charger->attrs[0] = &charger->attr_name.attr; + charger->attrs[1] = &charger->attr_state.attr; + charger->attrs[2] = &charger->attr_externally_control.attr; + charger->attrs[3] = NULL; + charger->attr_g.name = str; + charger->attr_g.attrs = charger->attrs; + + sysfs_attr_init(&charger->attr_name.attr); + charger->attr_name.attr.name = "name"; + charger->attr_name.attr.mode = 0444; + charger->attr_name.show = charger_name_show; + + sysfs_attr_init(&charger->attr_state.attr); + charger->attr_state.attr.name = "state"; + charger->attr_state.attr.mode = 0444; + charger->attr_state.show = charger_state_show; + + sysfs_attr_init(&charger->attr_externally_control.attr); + charger->attr_externally_control.attr.name + = "externally_control"; + charger->attr_externally_control.attr.mode = 0644; + charger->attr_externally_control.show + = charger_externally_control_show; + charger->attr_externally_control.store + = charger_externally_control_store; + + if (!desc->charger_regulators[i].externally_control || + !chargers_externally_control) { + chargers_externally_control = 0; + } + dev_info(&pdev->dev, "'%s' regulator's externally_control" + "is %d\n", charger->regulator_name, + charger->externally_control); + + ret = sysfs_create_group(&cm->charger_psy.dev->kobj, + &charger->attr_g); + if (ret < 0) { + dev_info(&pdev->dev, "Cannot create sysfs entry" + "of %s regulator\n", + charger->regulator_name); + } + } + + if (chargers_externally_control) { + dev_err(&pdev->dev, "Cannot register regulator because " + "charger-manager must need at least " + "one charger for charging battery\n"); + + ret = -EINVAL; + goto err_chg_enable; } ret = try_charger_enable(cm, true); @@ -1292,6 +1620,14 @@ static int charger_manager_probe(struct platform_device *pdev) return 0; err_chg_enable: + for (i = 0; i < desc->num_charger_regulators; i++) { + struct charger_regulator *charger; + + charger = &desc->charger_regulators[i]; + sysfs_remove_group(&cm->charger_psy.dev->kobj, + &charger->attr_g); + kfree(charger->attr_g.name); + } err_extcon: for (i = 0 ; i < desc->num_charger_regulators ; i++) { struct charger_regulator *charger diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c index 3fd3e95d2b8..94762e67e22 100644 --- a/drivers/power/da9030_battery.c +++ b/drivers/power/da9030_battery.c @@ -187,8 +187,8 @@ static const struct file_operations bat_debug_fops = { static struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger) { - charger->debug_file = debugfs_create_file("charger", 0666, 0, charger, - &bat_debug_fops); + charger->debug_file = debugfs_create_file("charger", 0666, NULL, + charger, &bat_debug_fops); return charger->debug_file; } diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c index a5f6a0ec157..d9d034d7496 100644 --- a/drivers/power/da9052-battery.c +++ b/drivers/power/da9052-battery.c @@ -327,7 +327,7 @@ static int da9052_bat_interpolate(int vbat_lower, int vbat_upper, return tmp; } -unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp) +static unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp) { int i; @@ -345,6 +345,13 @@ unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp) && (adc_temp <= vc_tbl_ref[i])) return i + 1; } + /* + * For some reason authors of the driver didn't presume that we can + * end up here. It might be OK, but might be not, no one knows for + * sure. Go check your battery, is it on fire? + */ + WARN_ON(1); + return 0; } static int da9052_bat_read_capacity(struct da9052_battery *bat, int *capacity) @@ -616,7 +623,7 @@ static s32 __devinit da9052_bat_probe(struct platform_device *pdev) return 0; err: - for (; i >= 0; i--) { + while (--i >= 0) { irq = platform_get_irq_byname(pdev, da9052_bat_irqs[i]); free_irq(bat->da9052->irq_base + irq, bat); } diff --git a/drivers/power/ds2781_battery.c b/drivers/power/ds2781_battery.c index 7a1ff4e4cf9..22b3c8c9355 100644 --- a/drivers/power/ds2781_battery.c +++ b/drivers/power/ds2781_battery.c @@ -755,11 +755,9 @@ static int __devinit ds2781_battery_probe(struct platform_device *pdev) int ret = 0; struct ds2781_device_info *dev_info; - dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL); - if (!dev_info) { - ret = -ENOMEM; - goto fail; - } + dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL); + if (!dev_info) + return -ENOMEM; platform_set_drvdata(pdev, dev_info); @@ -774,7 +772,7 @@ static int __devinit ds2781_battery_probe(struct platform_device *pdev) ret = power_supply_register(&pdev->dev, &dev_info->bat); if (ret) { dev_err(dev_info->dev, "failed to register battery\n"); - goto fail_free_info; + goto fail; } ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2781_attr_group); @@ -808,8 +806,6 @@ fail_remove_group: sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2781_attr_group); fail_unregister: power_supply_unregister(&dev_info->bat); -fail_free_info: - kfree(dev_info); fail: return ret; } @@ -823,7 +819,6 @@ static int __devexit ds2781_battery_remove(struct platform_device *pdev) power_supply_unregister(&dev_info->bat); - kfree(dev_info); return 0; } @@ -834,20 +829,7 @@ static struct platform_driver ds2781_battery_driver = { .probe = ds2781_battery_probe, .remove = __devexit_p(ds2781_battery_remove), }; - -static int __init ds2781_battery_init(void) -{ - return platform_driver_register(&ds2781_battery_driver); -} - -static void __exit ds2781_battery_exit(void) -{ - platform_driver_unregister(&ds2781_battery_driver); -} - -module_init(ds2781_battery_init); -module_exit(ds2781_battery_exit); - +module_platform_driver(ds2781_battery_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>"); diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c index 6a364f4798f..c628224b7f5 100644 --- a/drivers/power/lp8727_charger.c +++ b/drivers/power/lp8727_charger.c @@ -17,61 +17,65 @@ #include <linux/power_supply.h> #include <linux/platform_data/lp8727.h> -#define DEBOUNCE_MSEC 270 +#define LP8788_NUM_INTREGS 2 +#define DEFAULT_DEBOUNCE_MSEC 270 /* Registers */ -#define CTRL1 0x1 -#define CTRL2 0x2 -#define SWCTRL 0x3 -#define INT1 0x4 -#define INT2 0x5 -#define STATUS1 0x6 -#define STATUS2 0x7 -#define CHGCTRL2 0x9 +#define LP8727_CTRL1 0x1 +#define LP8727_CTRL2 0x2 +#define LP8727_SWCTRL 0x3 +#define LP8727_INT1 0x4 +#define LP8727_INT2 0x5 +#define LP8727_STATUS1 0x6 +#define LP8727_STATUS2 0x7 +#define LP8727_CHGCTRL2 0x9 /* CTRL1 register */ -#define CP_EN (1 << 0) -#define ADC_EN (1 << 1) -#define ID200_EN (1 << 4) +#define LP8727_CP_EN BIT(0) +#define LP8727_ADC_EN BIT(1) +#define LP8727_ID200_EN BIT(4) /* CTRL2 register */ -#define CHGDET_EN (1 << 1) -#define INT_EN (1 << 6) +#define LP8727_CHGDET_EN BIT(1) +#define LP8727_INT_EN BIT(6) /* SWCTRL register */ -#define SW_DM1_DM (0x0 << 0) -#define SW_DM1_U1 (0x1 << 0) -#define SW_DM1_HiZ (0x7 << 0) -#define SW_DP2_DP (0x0 << 3) -#define SW_DP2_U2 (0x1 << 3) -#define SW_DP2_HiZ (0x7 << 3) +#define LP8727_SW_DM1_DM (0x0 << 0) +#define LP8727_SW_DM1_HiZ (0x7 << 0) +#define LP8727_SW_DP2_DP (0x0 << 3) +#define LP8727_SW_DP2_HiZ (0x7 << 3) /* INT1 register */ -#define IDNO (0xF << 0) -#define VBUS (1 << 4) +#define LP8727_IDNO (0xF << 0) +#define LP8727_VBUS BIT(4) /* STATUS1 register */ -#define CHGSTAT (3 << 4) -#define CHPORT (1 << 6) -#define DCPORT (1 << 7) +#define LP8727_CHGSTAT (3 << 4) +#define LP8727_CHPORT BIT(6) +#define LP8727_DCPORT BIT(7) +#define LP8727_STAT_EOC 0x30 /* STATUS2 register */ -#define TEMP_STAT (3 << 5) +#define LP8727_TEMP_STAT (3 << 5) +#define LP8727_TEMP_SHIFT 5 + +/* CHGCTRL2 register */ +#define LP8727_ICHG_SHIFT 4 enum lp8727_dev_id { - ID_NONE, - ID_TA, - ID_DEDICATED_CHG, - ID_USB_CHG, - ID_USB_DS, - ID_MAX, + LP8727_ID_NONE, + LP8727_ID_TA, + LP8727_ID_DEDICATED_CHG, + LP8727_ID_USB_CHG, + LP8727_ID_USB_DS, + LP8727_ID_MAX, }; -enum lp8727_chg_stat { - PRECHG, - CC, - CV, - EOC, +enum lp8727_die_temp { + LP8788_TEMP_75C, + LP8788_TEMP_95C, + LP8788_TEMP_115C, + LP8788_TEMP_135C, }; struct lp8727_psy { @@ -84,12 +88,17 @@ struct lp8727_chg { struct device *dev; struct i2c_client *client; struct mutex xfer_lock; - struct delayed_work work; - struct workqueue_struct *irqthread; - struct lp8727_platform_data *pdata; struct lp8727_psy *psy; - struct lp8727_chg_param *chg_parm; + struct lp8727_platform_data *pdata; + + /* Charger Data */ enum lp8727_dev_id devid; + struct lp8727_chg_param *chg_param; + + /* Interrupt Handling */ + int irq; + struct delayed_work work; + unsigned long debounce_jiffies; }; static int lp8727_read_bytes(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len) @@ -119,81 +128,84 @@ static int lp8727_write_byte(struct lp8727_chg *pchg, u8 reg, u8 data) return ret; } -static int lp8727_is_charger_attached(const char *name, int id) +static bool lp8727_is_charger_attached(const char *name, int id) { - if (name) { - if (!strcmp(name, "ac")) - return (id == ID_TA || id == ID_DEDICATED_CHG) ? 1 : 0; - else if (!strcmp(name, "usb")) - return (id == ID_USB_CHG) ? 1 : 0; - } + if (!strcmp(name, "ac")) + return id == LP8727_ID_TA || id == LP8727_ID_DEDICATED_CHG; + else if (!strcmp(name, "usb")) + return id == LP8727_ID_USB_CHG; - return (id >= ID_TA && id <= ID_USB_CHG) ? 1 : 0; + return id >= LP8727_ID_TA && id <= LP8727_ID_USB_CHG; } static int lp8727_init_device(struct lp8727_chg *pchg) { u8 val; int ret; + u8 intstat[LP8788_NUM_INTREGS]; - val = ID200_EN | ADC_EN | CP_EN; - ret = lp8727_write_byte(pchg, CTRL1, val); + /* clear interrupts */ + ret = lp8727_read_bytes(pchg, LP8727_INT1, intstat, LP8788_NUM_INTREGS); if (ret) return ret; - val = INT_EN | CHGDET_EN; - ret = lp8727_write_byte(pchg, CTRL2, val); + val = LP8727_ID200_EN | LP8727_ADC_EN | LP8727_CP_EN; + ret = lp8727_write_byte(pchg, LP8727_CTRL1, val); if (ret) return ret; - return 0; + val = LP8727_INT_EN | LP8727_CHGDET_EN; + return lp8727_write_byte(pchg, LP8727_CTRL2, val); } static int lp8727_is_dedicated_charger(struct lp8727_chg *pchg) { u8 val; - lp8727_read_byte(pchg, STATUS1, &val); - return val & DCPORT; + + lp8727_read_byte(pchg, LP8727_STATUS1, &val); + return val & LP8727_DCPORT; } static int lp8727_is_usb_charger(struct lp8727_chg *pchg) { u8 val; - lp8727_read_byte(pchg, STATUS1, &val); - return val & CHPORT; + + lp8727_read_byte(pchg, LP8727_STATUS1, &val); + return val & LP8727_CHPORT; } -static void lp8727_ctrl_switch(struct lp8727_chg *pchg, u8 sw) +static inline void lp8727_ctrl_switch(struct lp8727_chg *pchg, u8 sw) { - lp8727_write_byte(pchg, SWCTRL, sw); + lp8727_write_byte(pchg, LP8727_SWCTRL, sw); } static void lp8727_id_detection(struct lp8727_chg *pchg, u8 id, int vbusin) { - u8 devid = ID_NONE; - u8 swctrl = SW_DM1_HiZ | SW_DP2_HiZ; + struct lp8727_platform_data *pdata = pchg->pdata; + u8 devid = LP8727_ID_NONE; + u8 swctrl = LP8727_SW_DM1_HiZ | LP8727_SW_DP2_HiZ; switch (id) { case 0x5: - devid = ID_TA; - pchg->chg_parm = &pchg->pdata->ac; + devid = LP8727_ID_TA; + pchg->chg_param = pdata ? pdata->ac : NULL; break; case 0xB: if (lp8727_is_dedicated_charger(pchg)) { - pchg->chg_parm = &pchg->pdata->ac; - devid = ID_DEDICATED_CHG; + pchg->chg_param = pdata ? pdata->ac : NULL; + devid = LP8727_ID_DEDICATED_CHG; } else if (lp8727_is_usb_charger(pchg)) { - pchg->chg_parm = &pchg->pdata->usb; - devid = ID_USB_CHG; - swctrl = SW_DM1_DM | SW_DP2_DP; + pchg->chg_param = pdata ? pdata->usb : NULL; + devid = LP8727_ID_USB_CHG; + swctrl = LP8727_SW_DM1_DM | LP8727_SW_DP2_DP; } else if (vbusin) { - devid = ID_USB_DS; - swctrl = SW_DM1_DM | SW_DP2_DP; + devid = LP8727_ID_USB_DS; + swctrl = LP8727_SW_DM1_DM | LP8727_SW_DP2_DP; } break; default: - devid = ID_NONE; - pchg->chg_parm = NULL; + devid = LP8727_ID_NONE; + pchg->chg_param = NULL; break; } @@ -205,24 +217,26 @@ static void lp8727_enable_chgdet(struct lp8727_chg *pchg) { u8 val; - lp8727_read_byte(pchg, CTRL2, &val); - val |= CHGDET_EN; - lp8727_write_byte(pchg, CTRL2, val); + lp8727_read_byte(pchg, LP8727_CTRL2, &val); + val |= LP8727_CHGDET_EN; + lp8727_write_byte(pchg, LP8727_CTRL2, val); } static void lp8727_delayed_func(struct work_struct *_work) { - u8 intstat[2], idno, vbus; - struct lp8727_chg *pchg = - container_of(_work, struct lp8727_chg, work.work); + struct lp8727_chg *pchg = container_of(_work, struct lp8727_chg, + work.work); + u8 intstat[LP8788_NUM_INTREGS]; + u8 idno; + u8 vbus; - if (lp8727_read_bytes(pchg, INT1, intstat, 2)) { + if (lp8727_read_bytes(pchg, LP8727_INT1, intstat, LP8788_NUM_INTREGS)) { dev_err(pchg->dev, "can not read INT registers\n"); return; } - idno = intstat[0] & IDNO; - vbus = intstat[0] & VBUS; + idno = intstat[0] & LP8727_IDNO; + vbus = intstat[0] & LP8727_VBUS; lp8727_id_detection(pchg, idno, vbus); lp8727_enable_chgdet(pchg); @@ -235,29 +249,44 @@ static void lp8727_delayed_func(struct work_struct *_work) static irqreturn_t lp8727_isr_func(int irq, void *ptr) { struct lp8727_chg *pchg = ptr; - unsigned long delay = msecs_to_jiffies(DEBOUNCE_MSEC); - - queue_delayed_work(pchg->irqthread, &pchg->work, delay); + schedule_delayed_work(&pchg->work, pchg->debounce_jiffies); return IRQ_HANDLED; } -static int lp8727_intr_config(struct lp8727_chg *pchg) +static int lp8727_setup_irq(struct lp8727_chg *pchg) { + int ret; + int irq = pchg->client->irq; + unsigned delay_msec = pchg->pdata ? pchg->pdata->debounce_msec : + DEFAULT_DEBOUNCE_MSEC; + INIT_DELAYED_WORK(&pchg->work, lp8727_delayed_func); - pchg->irqthread = create_singlethread_workqueue("lp8727-irqthd"); - if (!pchg->irqthread) { - dev_err(pchg->dev, "can not create thread for lp8727\n"); - return -ENOMEM; + if (irq <= 0) { + dev_warn(pchg->dev, "invalid irq number: %d\n", irq); + return 0; } - return request_threaded_irq(pchg->client->irq, - NULL, - lp8727_isr_func, - IRQF_TRIGGER_FALLING, - "lp8727_irq", - pchg); + ret = request_threaded_irq(irq, NULL, lp8727_isr_func, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "lp8727_irq", pchg); + + if (ret) + return ret; + + pchg->irq = irq; + pchg->debounce_jiffies = msecs_to_jiffies(delay_msec); + + return 0; +} + +static void lp8727_release_irq(struct lp8727_chg *pchg) +{ + cancel_delayed_work_sync(&pchg->work); + + if (pchg->irq) + free_irq(pchg->irq, pchg); } static enum power_supply_property lp8727_charger_prop[] = { @@ -283,54 +312,82 @@ static int lp8727_charger_get_property(struct power_supply *psy, { struct lp8727_chg *pchg = dev_get_drvdata(psy->dev->parent); - if (psp == POWER_SUPPLY_PROP_ONLINE) - val->intval = lp8727_is_charger_attached(psy->name, - pchg->devid); + if (psp != POWER_SUPPLY_PROP_ONLINE) + return -EINVAL; + + val->intval = lp8727_is_charger_attached(psy->name, pchg->devid); return 0; } +static bool lp8727_is_high_temperature(enum lp8727_die_temp temp) +{ + switch (temp) { + case LP8788_TEMP_95C: + case LP8788_TEMP_115C: + case LP8788_TEMP_135C: + return true; + default: + return false; + } +} + static int lp8727_battery_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { struct lp8727_chg *pchg = dev_get_drvdata(psy->dev->parent); + struct lp8727_platform_data *pdata = pchg->pdata; + enum lp8727_die_temp temp; u8 read; switch (psp) { case POWER_SUPPLY_PROP_STATUS: - if (lp8727_is_charger_attached(psy->name, pchg->devid)) { - lp8727_read_byte(pchg, STATUS1, &read); - if (((read & CHGSTAT) >> 4) == EOC) - val->intval = POWER_SUPPLY_STATUS_FULL; - else - val->intval = POWER_SUPPLY_STATUS_CHARGING; - } else { + if (!lp8727_is_charger_attached(psy->name, pchg->devid)) { val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + return 0; } + + lp8727_read_byte(pchg, LP8727_STATUS1, &read); + + val->intval = (read & LP8727_CHGSTAT) == LP8727_STAT_EOC ? + POWER_SUPPLY_STATUS_FULL : + POWER_SUPPLY_STATUS_CHARGING; break; case POWER_SUPPLY_PROP_HEALTH: - lp8727_read_byte(pchg, STATUS2, &read); - read = (read & TEMP_STAT) >> 5; - if (read >= 0x1 && read <= 0x3) - val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; - else - val->intval = POWER_SUPPLY_HEALTH_GOOD; + lp8727_read_byte(pchg, LP8727_STATUS2, &read); + temp = (read & LP8727_TEMP_STAT) >> LP8727_TEMP_SHIFT; + + val->intval = lp8727_is_high_temperature(temp) ? + POWER_SUPPLY_HEALTH_OVERHEAT : + POWER_SUPPLY_HEALTH_GOOD; break; case POWER_SUPPLY_PROP_PRESENT: - if (pchg->pdata->get_batt_present) + if (!pdata) + return -EINVAL; + + if (pdata->get_batt_present) val->intval = pchg->pdata->get_batt_present(); break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: - if (pchg->pdata->get_batt_level) + if (!pdata) + return -EINVAL; + + if (pdata->get_batt_level) val->intval = pchg->pdata->get_batt_level(); break; case POWER_SUPPLY_PROP_CAPACITY: - if (pchg->pdata->get_batt_capacity) + if (!pdata) + return -EINVAL; + + if (pdata->get_batt_capacity) val->intval = pchg->pdata->get_batt_capacity(); break; case POWER_SUPPLY_PROP_TEMP: - if (pchg->pdata->get_batt_temp) + if (!pdata) + return -EINVAL; + + if (pdata->get_batt_temp) val->intval = pchg->pdata->get_batt_temp(); break; default: @@ -343,16 +400,20 @@ static int lp8727_battery_get_property(struct power_supply *psy, static void lp8727_charger_changed(struct power_supply *psy) { struct lp8727_chg *pchg = dev_get_drvdata(psy->dev->parent); + u8 eoc_level; + u8 ichg; u8 val; - u8 eoc_level, ichg; - - if (lp8727_is_charger_attached(psy->name, pchg->devid)) { - if (pchg->chg_parm) { - eoc_level = pchg->chg_parm->eoc_level; - ichg = pchg->chg_parm->ichg; - val = (ichg << 4) | eoc_level; - lp8727_write_byte(pchg, CHGCTRL2, val); - } + + /* skip if no charger exists */ + if (!lp8727_is_charger_attached(psy->name, pchg->devid)) + return; + + /* update charging parameters */ + if (pchg->chg_param) { + eoc_level = pchg->chg_param->eoc_level; + ichg = pchg->chg_param->ichg; + val = (ichg << LP8727_ICHG_SHIFT) | eoc_level; + lp8727_write_byte(pchg, LP8727_CHGCTRL2, val); } } @@ -360,9 +421,9 @@ static int lp8727_register_psy(struct lp8727_chg *pchg) { struct lp8727_psy *psy; - psy = kzalloc(sizeof(*psy), GFP_KERNEL); + psy = devm_kzalloc(pchg->dev, sizeof(*psy), GFP_KERNEL); if (!psy) - goto err_mem; + return -ENOMEM; pchg->psy = psy; @@ -375,7 +436,7 @@ static int lp8727_register_psy(struct lp8727_chg *pchg) psy->ac.num_supplicants = ARRAY_SIZE(battery_supplied_to); if (power_supply_register(pchg->dev, &psy->ac)) - goto err_psy; + goto err_psy_ac; psy->usb.name = "usb"; psy->usb.type = POWER_SUPPLY_TYPE_USB; @@ -386,7 +447,7 @@ static int lp8727_register_psy(struct lp8727_chg *pchg) psy->usb.num_supplicants = ARRAY_SIZE(battery_supplied_to); if (power_supply_register(pchg->dev, &psy->usb)) - goto err_psy; + goto err_psy_usb; psy->batt.name = "main_batt"; psy->batt.type = POWER_SUPPLY_TYPE_BATTERY; @@ -396,14 +457,15 @@ static int lp8727_register_psy(struct lp8727_chg *pchg) psy->batt.external_power_changed = lp8727_charger_changed; if (power_supply_register(pchg->dev, &psy->batt)) - goto err_psy; + goto err_psy_batt; return 0; -err_mem: - return -ENOMEM; -err_psy: - kfree(psy); +err_psy_batt: + power_supply_unregister(&psy->usb); +err_psy_usb: + power_supply_unregister(&psy->ac); +err_psy_ac: return -EPERM; } @@ -417,7 +479,6 @@ static void lp8727_unregister_psy(struct lp8727_chg *pchg) power_supply_unregister(&psy->ac); power_supply_unregister(&psy->usb); power_supply_unregister(&psy->batt); - kfree(psy); } static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id) @@ -428,7 +489,7 @@ static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id) if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) return -EIO; - pchg = kzalloc(sizeof(*pchg), GFP_KERNEL); + pchg = devm_kzalloc(&cl->dev, sizeof(*pchg), GFP_KERNEL); if (!pchg) return -ENOMEM; @@ -442,37 +503,31 @@ static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id) ret = lp8727_init_device(pchg); if (ret) { dev_err(pchg->dev, "i2c communication err: %d", ret); - goto error; + return ret; } - ret = lp8727_intr_config(pchg); + ret = lp8727_register_psy(pchg); if (ret) { - dev_err(pchg->dev, "irq handler err: %d", ret); - goto error; + dev_err(pchg->dev, "power supplies register err: %d", ret); + return ret; } - ret = lp8727_register_psy(pchg); + ret = lp8727_setup_irq(pchg); if (ret) { - dev_err(pchg->dev, "power supplies register err: %d", ret); - goto error; + dev_err(pchg->dev, "irq handler err: %d", ret); + lp8727_unregister_psy(pchg); + return ret; } return 0; - -error: - kfree(pchg); - return ret; } static int __devexit lp8727_remove(struct i2c_client *cl) { struct lp8727_chg *pchg = i2c_get_clientdata(cl); + lp8727_release_irq(pchg); lp8727_unregister_psy(pchg); - free_irq(pchg->client->irq, pchg); - flush_workqueue(pchg->irqthread); - destroy_workqueue(pchg->irqthread); - kfree(pchg); return 0; } @@ -493,6 +548,5 @@ static struct i2c_driver lp8727_driver = { module_i2c_driver(lp8727_driver); MODULE_DESCRIPTION("TI/National Semiconductor LP8727 charger driver"); -MODULE_AUTHOR("Woogyom Kim <milo.kim@ti.com>, " - "Daniel Jeong <daniel.jeong@ti.com>"); +MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>, Daniel Jeong <daniel.jeong@ti.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/power/lp8788-charger.c b/drivers/power/lp8788-charger.c new file mode 100644 index 00000000000..e852d12cd07 --- /dev/null +++ b/drivers/power/lp8788-charger.c @@ -0,0 +1,795 @@ +/* + * TI LP8788 MFD - battery charger driver + * + * Copyright 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/err.h> +#include <linux/iio/consumer.h> +#include <linux/interrupt.h> +#include <linux/irqdomain.h> +#include <linux/mfd/lp8788.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +/* register address */ +#define LP8788_CHG_STATUS 0x07 +#define LP8788_CHG_IDCIN 0x13 +#define LP8788_CHG_IBATT 0x14 +#define LP8788_CHG_VTERM 0x15 +#define LP8788_CHG_EOC 0x16 + +/* mask/shift bits */ +#define LP8788_CHG_INPUT_STATE_M 0x03 /* Addr 07h */ +#define LP8788_CHG_STATE_M 0x3C +#define LP8788_CHG_STATE_S 2 +#define LP8788_NO_BATT_M BIT(6) +#define LP8788_BAD_BATT_M BIT(7) +#define LP8788_CHG_IBATT_M 0x1F /* Addr 14h */ +#define LP8788_CHG_VTERM_M 0x0F /* Addr 15h */ +#define LP8788_CHG_EOC_LEVEL_M 0x30 /* Addr 16h */ +#define LP8788_CHG_EOC_LEVEL_S 4 +#define LP8788_CHG_EOC_TIME_M 0x0E +#define LP8788_CHG_EOC_TIME_S 1 +#define LP8788_CHG_EOC_MODE_M BIT(0) + +#define LP8788_CHARGER_NAME "charger" +#define LP8788_BATTERY_NAME "main_batt" + +#define LP8788_CHG_START 0x11 +#define LP8788_CHG_END 0x1C + +#define LP8788_BUF_SIZE 40 +#define LP8788_ISEL_MAX 23 +#define LP8788_ISEL_STEP 50 +#define LP8788_VTERM_MIN 4100 +#define LP8788_VTERM_STEP 25 +#define LP8788_MAX_BATT_CAPACITY 100 +#define LP8788_MAX_CHG_IRQS 11 + +enum lp8788_charging_state { + LP8788_OFF, + LP8788_WARM_UP, + LP8788_LOW_INPUT = 0x3, + LP8788_PRECHARGE, + LP8788_CC, + LP8788_CV, + LP8788_MAINTENANCE, + LP8788_BATTERY_FAULT, + LP8788_SYSTEM_SUPPORT = 0xC, + LP8788_HIGH_CURRENT = 0xF, + LP8788_MAX_CHG_STATE, +}; + +enum lp8788_charger_adc_sel { + LP8788_VBATT, + LP8788_BATT_TEMP, + LP8788_NUM_CHG_ADC, +}; + +enum lp8788_charger_input_state { + LP8788_SYSTEM_SUPPLY = 1, + LP8788_FULL_FUNCTION, +}; + +/* + * struct lp8788_chg_irq + * @which : lp8788 interrupt id + * @virq : Linux IRQ number from irq_domain + */ +struct lp8788_chg_irq { + enum lp8788_int_id which; + int virq; +}; + +/* + * struct lp8788_charger + * @lp : used for accessing the registers of mfd lp8788 device + * @charger : power supply driver for the battery charger + * @battery : power supply driver for the battery + * @charger_work : work queue for charger input interrupts + * @chan : iio channels for getting adc values + * eg) battery voltage, capacity and temperature + * @irqs : charger dedicated interrupts + * @num_irqs : total numbers of charger interrupts + * @pdata : charger platform specific data + */ +struct lp8788_charger { + struct lp8788 *lp; + struct power_supply charger; + struct power_supply battery; + struct work_struct charger_work; + struct iio_channel *chan[LP8788_NUM_CHG_ADC]; + struct lp8788_chg_irq irqs[LP8788_MAX_CHG_IRQS]; + int num_irqs; + struct lp8788_charger_platform_data *pdata; +}; + +static char *battery_supplied_to[] = { + LP8788_BATTERY_NAME, +}; + +static enum power_supply_property lp8788_charger_prop[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_CURRENT_MAX, +}; + +static enum power_supply_property lp8788_battery_prop[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_TEMP, +}; + +static bool lp8788_is_charger_detected(struct lp8788_charger *pchg) +{ + u8 data; + + lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data); + data &= LP8788_CHG_INPUT_STATE_M; + + return data == LP8788_SYSTEM_SUPPLY || data == LP8788_FULL_FUNCTION; +} + +static int lp8788_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct lp8788_charger *pchg = dev_get_drvdata(psy->dev->parent); + u8 read; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = lp8788_is_charger_detected(pchg); + break; + case POWER_SUPPLY_PROP_CURRENT_MAX: + lp8788_read_byte(pchg->lp, LP8788_CHG_IDCIN, &read); + val->intval = LP8788_ISEL_STEP * + (min_t(int, read, LP8788_ISEL_MAX) + 1); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int lp8788_get_battery_status(struct lp8788_charger *pchg, + union power_supply_propval *val) +{ + enum lp8788_charging_state state; + u8 data; + int ret; + + ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data); + if (ret) + return ret; + + state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S; + switch (state) { + case LP8788_OFF: + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + case LP8788_PRECHARGE: + case LP8788_CC: + case LP8788_CV: + case LP8788_HIGH_CURRENT: + val->intval = POWER_SUPPLY_STATUS_CHARGING; + break; + case LP8788_MAINTENANCE: + val->intval = POWER_SUPPLY_STATUS_FULL; + break; + default: + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + } + + return 0; +} + +static int lp8788_get_battery_health(struct lp8788_charger *pchg, + union power_supply_propval *val) +{ + u8 data; + int ret; + + ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data); + if (ret) + return ret; + + if (data & LP8788_NO_BATT_M) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (data & LP8788_BAD_BATT_M) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + + return 0; +} + +static int lp8788_get_battery_present(struct lp8788_charger *pchg, + union power_supply_propval *val) +{ + u8 data; + int ret; + + ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data); + if (ret) + return ret; + + val->intval = !(data & LP8788_NO_BATT_M); + return 0; +} + +static int lp8788_get_vbatt_adc(struct lp8788_charger *pchg, + unsigned int *result) +{ + struct iio_channel *channel = pchg->chan[LP8788_VBATT]; + int scaleint; + int scalepart; + int ret; + + if (!channel) + return -EINVAL; + + ret = iio_read_channel_scale(channel, &scaleint, &scalepart); + if (ret != IIO_VAL_INT_PLUS_MICRO) + return -EINVAL; + + /* unit: mV */ + *result = (scaleint + scalepart * 1000000) / 1000; + + return 0; +} + +static int lp8788_get_battery_voltage(struct lp8788_charger *pchg, + union power_supply_propval *val) +{ + return lp8788_get_vbatt_adc(pchg, &val->intval); +} + +static int lp8788_get_battery_capacity(struct lp8788_charger *pchg, + union power_supply_propval *val) +{ + struct lp8788 *lp = pchg->lp; + struct lp8788_charger_platform_data *pdata = pchg->pdata; + unsigned int max_vbatt; + unsigned int vbatt; + enum lp8788_charging_state state; + u8 data; + int ret; + + if (!pdata) + return -EINVAL; + + max_vbatt = pdata->max_vbatt_mv; + if (max_vbatt == 0) + return -EINVAL; + + ret = lp8788_read_byte(lp, LP8788_CHG_STATUS, &data); + if (ret) + return ret; + + state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S; + + if (state == LP8788_MAINTENANCE) { + val->intval = LP8788_MAX_BATT_CAPACITY; + } else { + ret = lp8788_get_vbatt_adc(pchg, &vbatt); + if (ret) + return ret; + + val->intval = (vbatt * LP8788_MAX_BATT_CAPACITY) / max_vbatt; + val->intval = min(val->intval, LP8788_MAX_BATT_CAPACITY); + } + + return 0; +} + +static int lp8788_get_battery_temperature(struct lp8788_charger *pchg, + union power_supply_propval *val) +{ + struct iio_channel *channel = pchg->chan[LP8788_BATT_TEMP]; + int scaleint; + int scalepart; + int ret; + + if (!channel) + return -EINVAL; + + ret = iio_read_channel_scale(channel, &scaleint, &scalepart); + if (ret != IIO_VAL_INT_PLUS_MICRO) + return -EINVAL; + + /* unit: 0.1 'C */ + val->intval = (scaleint + scalepart * 1000000) / 100; + + return 0; +} + +static int lp8788_get_battery_charging_current(struct lp8788_charger *pchg, + union power_supply_propval *val) +{ + u8 read; + + lp8788_read_byte(pchg->lp, LP8788_CHG_IBATT, &read); + read &= LP8788_CHG_IBATT_M; + val->intval = LP8788_ISEL_STEP * + (min_t(int, read, LP8788_ISEL_MAX) + 1); + + return 0; +} + +static int lp8788_get_charging_termination_voltage(struct lp8788_charger *pchg, + union power_supply_propval *val) +{ + u8 read; + + lp8788_read_byte(pchg->lp, LP8788_CHG_VTERM, &read); + read &= LP8788_CHG_VTERM_M; + val->intval = LP8788_VTERM_MIN + LP8788_VTERM_STEP * read; + + return 0; +} + +static int lp8788_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct lp8788_charger *pchg = dev_get_drvdata(psy->dev->parent); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + return lp8788_get_battery_status(pchg, val); + case POWER_SUPPLY_PROP_HEALTH: + return lp8788_get_battery_health(pchg, val); + case POWER_SUPPLY_PROP_PRESENT: + return lp8788_get_battery_present(pchg, val); + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + return lp8788_get_battery_voltage(pchg, val); + case POWER_SUPPLY_PROP_CAPACITY: + return lp8788_get_battery_capacity(pchg, val); + case POWER_SUPPLY_PROP_TEMP: + return lp8788_get_battery_temperature(pchg, val); + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + return lp8788_get_battery_charging_current(pchg, val); + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + return lp8788_get_charging_termination_voltage(pchg, val); + default: + return -EINVAL; + } +} + +static inline bool lp8788_is_valid_charger_register(u8 addr) +{ + return addr >= LP8788_CHG_START && addr <= LP8788_CHG_END; +} + +static int lp8788_update_charger_params(struct lp8788_charger *pchg) +{ + struct lp8788 *lp = pchg->lp; + struct lp8788_charger_platform_data *pdata = pchg->pdata; + struct lp8788_chg_param *param; + int i; + int ret; + + if (!pdata || !pdata->chg_params) { + dev_info(lp->dev, "skip updating charger parameters\n"); + return 0; + } + + /* settting charging parameters */ + for (i = 0; i < pdata->num_chg_params; i++) { + param = pdata->chg_params + i; + + if (!param) + continue; + + if (lp8788_is_valid_charger_register(param->addr)) { + ret = lp8788_write_byte(lp, param->addr, param->val); + if (ret) + return ret; + } + } + + return 0; +} + +static int lp8788_psy_register(struct platform_device *pdev, + struct lp8788_charger *pchg) +{ + pchg->charger.name = LP8788_CHARGER_NAME; + pchg->charger.type = POWER_SUPPLY_TYPE_MAINS; + pchg->charger.properties = lp8788_charger_prop; + pchg->charger.num_properties = ARRAY_SIZE(lp8788_charger_prop); + pchg->charger.get_property = lp8788_charger_get_property; + pchg->charger.supplied_to = battery_supplied_to; + pchg->charger.num_supplicants = ARRAY_SIZE(battery_supplied_to); + + if (power_supply_register(&pdev->dev, &pchg->charger)) + return -EPERM; + + pchg->battery.name = LP8788_BATTERY_NAME; + pchg->battery.type = POWER_SUPPLY_TYPE_BATTERY; + pchg->battery.properties = lp8788_battery_prop; + pchg->battery.num_properties = ARRAY_SIZE(lp8788_battery_prop); + pchg->battery.get_property = lp8788_battery_get_property; + + if (power_supply_register(&pdev->dev, &pchg->battery)) + return -EPERM; + + return 0; +} + +static void lp8788_psy_unregister(struct lp8788_charger *pchg) +{ + power_supply_unregister(&pchg->battery); + power_supply_unregister(&pchg->charger); +} + +static void lp8788_charger_event(struct work_struct *work) +{ + struct lp8788_charger *pchg = + container_of(work, struct lp8788_charger, charger_work); + struct lp8788_charger_platform_data *pdata = pchg->pdata; + enum lp8788_charger_event event = lp8788_is_charger_detected(pchg); + + pdata->charger_event(pchg->lp, event); +} + +static bool lp8788_find_irq_id(struct lp8788_charger *pchg, int virq, int *id) +{ + bool found; + int i; + + for (i = 0; i < pchg->num_irqs; i++) { + if (pchg->irqs[i].virq == virq) { + *id = pchg->irqs[i].which; + found = true; + break; + } + } + + return found; +} + +static irqreturn_t lp8788_charger_irq_thread(int virq, void *ptr) +{ + struct lp8788_charger *pchg = ptr; + struct lp8788_charger_platform_data *pdata = pchg->pdata; + int id = -1; + + if (!lp8788_find_irq_id(pchg, virq, &id)) + return IRQ_NONE; + + switch (id) { + case LP8788_INT_CHG_INPUT_STATE: + case LP8788_INT_CHG_STATE: + case LP8788_INT_EOC: + case LP8788_INT_BATT_LOW: + case LP8788_INT_NO_BATT: + power_supply_changed(&pchg->charger); + power_supply_changed(&pchg->battery); + break; + default: + break; + } + + /* report charger dectection event if used */ + if (!pdata) + goto irq_handled; + + if (pdata->charger_event && id == LP8788_INT_CHG_INPUT_STATE) + schedule_work(&pchg->charger_work); + +irq_handled: + return IRQ_HANDLED; +} + +static int lp8788_set_irqs(struct platform_device *pdev, + struct lp8788_charger *pchg, const char *name) +{ + struct resource *r; + struct irq_domain *irqdm = pchg->lp->irqdm; + int irq_start; + int irq_end; + int virq; + int nr_irq; + int i; + int ret; + + /* no error even if no irq resource */ + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, name); + if (!r) + return 0; + + irq_start = r->start; + irq_end = r->end; + + for (i = irq_start; i <= irq_end; i++) { + nr_irq = pchg->num_irqs; + + virq = irq_create_mapping(irqdm, i); + pchg->irqs[nr_irq].virq = virq; + pchg->irqs[nr_irq].which = i; + pchg->num_irqs++; + + ret = request_threaded_irq(virq, NULL, + lp8788_charger_irq_thread, + 0, name, pchg); + if (ret) + break; + } + + if (i <= irq_end) + goto err_free_irq; + + return 0; + +err_free_irq: + for (i = 0; i < pchg->num_irqs; i++) + free_irq(pchg->irqs[i].virq, pchg); + return ret; +} + +static int lp8788_irq_register(struct platform_device *pdev, + struct lp8788_charger *pchg) +{ + struct lp8788 *lp = pchg->lp; + const char *name[] = { + LP8788_CHG_IRQ, LP8788_PRSW_IRQ, LP8788_BATT_IRQ + }; + int i; + int ret; + + INIT_WORK(&pchg->charger_work, lp8788_charger_event); + pchg->num_irqs = 0; + + for (i = 0; i < ARRAY_SIZE(name); i++) { + ret = lp8788_set_irqs(pdev, pchg, name[i]); + if (ret) { + dev_warn(lp->dev, "irq setup failed: %s\n", name[i]); + return ret; + } + } + + if (pchg->num_irqs > LP8788_MAX_CHG_IRQS) { + dev_err(lp->dev, "invalid total number of irqs: %d\n", + pchg->num_irqs); + return -EINVAL; + } + + + return 0; +} + +static void lp8788_irq_unregister(struct platform_device *pdev, + struct lp8788_charger *pchg) +{ + int i; + int irq; + + for (i = 0; i < pchg->num_irqs; i++) { + irq = pchg->irqs[i].virq; + if (!irq) + continue; + + free_irq(irq, pchg); + } +} + +static void lp8788_setup_adc_channel(struct lp8788_charger *pchg) +{ + struct lp8788_charger_platform_data *pdata = pchg->pdata; + struct device *dev = pchg->lp->dev; + struct iio_channel *chan; + enum lp8788_adc_id id; + const char *chan_name[LPADC_MAX] = { + [LPADC_VBATT_5P5] = "vbatt-5p5", + [LPADC_VBATT_6P0] = "vbatt-6p0", + [LPADC_VBATT_5P0] = "vbatt-5p0", + [LPADC_ADC1] = "adc1", + [LPADC_ADC2] = "adc2", + [LPADC_ADC3] = "adc3", + [LPADC_ADC4] = "adc4", + }; + + if (!pdata) + return; + + id = pdata->vbatt_adc; + switch (id) { + case LPADC_VBATT_5P5: + case LPADC_VBATT_6P0: + case LPADC_VBATT_5P0: + chan = iio_channel_get(NULL, chan_name[id]); + pchg->chan[LP8788_VBATT] = IS_ERR(chan) ? NULL : chan; + break; + default: + dev_err(dev, "invalid ADC id for VBATT: %d\n", id); + pchg->chan[LP8788_VBATT] = NULL; + break; + } + + id = pdata->batt_temp_adc; + switch (id) { + case LPADC_ADC1: + case LPADC_ADC2: + case LPADC_ADC3: + case LPADC_ADC4: + chan = iio_channel_get(NULL, chan_name[id]); + pchg->chan[LP8788_BATT_TEMP] = IS_ERR(chan) ? NULL : chan; + break; + default: + dev_err(dev, "invalid ADC id for BATT_TEMP : %d\n", id); + pchg->chan[LP8788_BATT_TEMP] = NULL; + break; + } +} + +static void lp8788_release_adc_channel(struct lp8788_charger *pchg) +{ + int i; + + for (i = 0; i < LP8788_NUM_CHG_ADC; i++) { + if (!pchg->chan[i]) + continue; + + iio_channel_release(pchg->chan[i]); + pchg->chan[i] = NULL; + } +} + +static ssize_t lp8788_show_charger_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lp8788_charger *pchg = dev_get_drvdata(dev); + enum lp8788_charging_state state; + char *desc[LP8788_MAX_CHG_STATE] = { + [LP8788_OFF] = "CHARGER OFF", + [LP8788_WARM_UP] = "WARM UP", + [LP8788_LOW_INPUT] = "LOW INPUT STATE", + [LP8788_PRECHARGE] = "CHARGING - PRECHARGE", + [LP8788_CC] = "CHARGING - CC", + [LP8788_CV] = "CHARGING - CV", + [LP8788_MAINTENANCE] = "NO CHARGING - MAINTENANCE", + [LP8788_BATTERY_FAULT] = "BATTERY FAULT", + [LP8788_SYSTEM_SUPPORT] = "SYSTEM SUPPORT", + [LP8788_HIGH_CURRENT] = "HIGH CURRENT", + }; + u8 data; + + lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data); + state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S; + + return scnprintf(buf, LP8788_BUF_SIZE, "%s\n", desc[state]); +} + +static ssize_t lp8788_show_eoc_time(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lp8788_charger *pchg = dev_get_drvdata(dev); + char *stime[] = { "400ms", "5min", "10min", "15min", + "20min", "25min", "30min" "No timeout" }; + u8 val; + + lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val); + val = (val & LP8788_CHG_EOC_TIME_M) >> LP8788_CHG_EOC_TIME_S; + + return scnprintf(buf, LP8788_BUF_SIZE, "End Of Charge Time: %s\n", + stime[val]); +} + +static ssize_t lp8788_show_eoc_level(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lp8788_charger *pchg = dev_get_drvdata(dev); + char *abs_level[] = { "25mA", "49mA", "75mA", "98mA" }; + char *relative_level[] = { "5%", "10%", "15%", "20%" }; + char *level; + u8 val; + u8 mode; + + lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val); + + mode = val & LP8788_CHG_EOC_MODE_M; + val = (val & LP8788_CHG_EOC_LEVEL_M) >> LP8788_CHG_EOC_LEVEL_S; + level = mode ? abs_level[val] : relative_level[val]; + + return scnprintf(buf, LP8788_BUF_SIZE, "End Of Charge Level: %s\n", + level); +} + +static DEVICE_ATTR(charger_status, S_IRUSR, lp8788_show_charger_status, NULL); +static DEVICE_ATTR(eoc_time, S_IRUSR, lp8788_show_eoc_time, NULL); +static DEVICE_ATTR(eoc_level, S_IRUSR, lp8788_show_eoc_level, NULL); + +static struct attribute *lp8788_charger_attr[] = { + &dev_attr_charger_status.attr, + &dev_attr_eoc_time.attr, + &dev_attr_eoc_level.attr, + NULL, +}; + +static const struct attribute_group lp8788_attr_group = { + .attrs = lp8788_charger_attr, +}; + +static __devinit int lp8788_charger_probe(struct platform_device *pdev) +{ + struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent); + struct lp8788_charger *pchg; + int ret; + + pchg = devm_kzalloc(lp->dev, sizeof(struct lp8788_charger), GFP_KERNEL); + if (!pchg) + return -ENOMEM; + + pchg->lp = lp; + pchg->pdata = lp->pdata ? lp->pdata->chg_pdata : NULL; + platform_set_drvdata(pdev, pchg); + + ret = lp8788_update_charger_params(pchg); + if (ret) + return ret; + + lp8788_setup_adc_channel(pchg); + + ret = lp8788_psy_register(pdev, pchg); + if (ret) + return ret; + + ret = sysfs_create_group(&pdev->dev.kobj, &lp8788_attr_group); + if (ret) { + lp8788_psy_unregister(pchg); + return ret; + } + + ret = lp8788_irq_register(pdev, pchg); + if (ret) + dev_warn(lp->dev, "failed to register charger irq: %d\n", ret); + + return 0; +} + +static int __devexit lp8788_charger_remove(struct platform_device *pdev) +{ + struct lp8788_charger *pchg = platform_get_drvdata(pdev); + + flush_work(&pchg->charger_work); + lp8788_irq_unregister(pdev, pchg); + sysfs_remove_group(&pdev->dev.kobj, &lp8788_attr_group); + lp8788_psy_unregister(pchg); + lp8788_release_adc_channel(pchg); + + return 0; +} + +static struct platform_driver lp8788_charger_driver = { + .probe = lp8788_charger_probe, + .remove = __devexit_p(lp8788_charger_remove), + .driver = { + .name = LP8788_DEV_CHARGER, + .owner = THIS_MODULE, + }, +}; +module_platform_driver(lp8788_charger_driver); + +MODULE_DESCRIPTION("TI LP8788 Charger Driver"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lp8788-charger"); diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c index 7312f265164..7df7c5facc1 100644 --- a/drivers/power/pda_power.c +++ b/drivers/power/pda_power.c @@ -281,6 +281,12 @@ static int pda_power_probe(struct platform_device *pdev) goto init_failed; } + ac_draw = regulator_get(dev, "ac_draw"); + if (IS_ERR(ac_draw)) { + dev_dbg(dev, "couldn't get ac_draw regulator\n"); + ac_draw = NULL; + } + update_status(); update_charger(); @@ -309,13 +315,6 @@ static int pda_power_probe(struct platform_device *pdev) pda_psy_usb.num_supplicants = pdata->num_supplicants; } - ac_draw = regulator_get(dev, "ac_draw"); - if (IS_ERR(ac_draw)) { - dev_dbg(dev, "couldn't get ac_draw regulator\n"); - ac_draw = NULL; - ret = PTR_ERR(ac_draw); - } - #ifdef CONFIG_USB_OTG_UTILS transceiver = usb_get_phy(USB_PHY_TYPE_USB2); if (!IS_ERR_OR_NULL(transceiver)) { diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 1d96614a17a..395c2cfa16c 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -138,6 +138,7 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(health), POWER_SUPPLY_ATTR(present), POWER_SUPPLY_ATTR(online), + POWER_SUPPLY_ATTR(authentic), POWER_SUPPLY_ATTR(technology), POWER_SUPPLY_ATTR(cycle_count), POWER_SUPPLY_ATTR(voltage_max), @@ -160,7 +161,9 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(charge_avg), POWER_SUPPLY_ATTR(charge_counter), POWER_SUPPLY_ATTR(constant_charge_current), + POWER_SUPPLY_ATTR(constant_charge_current_max), POWER_SUPPLY_ATTR(constant_charge_voltage), + POWER_SUPPLY_ATTR(constant_charge_voltage_max), POWER_SUPPLY_ATTR(energy_full_design), POWER_SUPPLY_ATTR(energy_empty_design), POWER_SUPPLY_ATTR(energy_full), diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c index a65e8f54157..4146596d254 100644 --- a/drivers/power/sbs-battery.c +++ b/drivers/power/sbs-battery.c @@ -759,6 +759,16 @@ static int __devinit sbs_probe(struct i2c_client *client, chip->irq = irq; skip_gpio: + /* + * Before we register, we need to make sure we can actually talk + * to the battery. + */ + rc = sbs_read_word_data(client, sbs_data[REG_STATUS].addr); + if (rc < 0) { + dev_err(&client->dev, "%s: Failed to get device status\n", + __func__); + goto exit_psupply; + } rc = power_supply_register(&client->dev, &chip->power_supply); if (rc) { diff --git a/drivers/power/smb347-charger.c b/drivers/power/smb347-charger.c index 332dd0110bd..a9707c11fbe 100644 --- a/drivers/power/smb347-charger.c +++ b/drivers/power/smb347-charger.c @@ -80,6 +80,7 @@ #define CFG_FAULT_IRQ_DCIN_UV BIT(2) #define CFG_STATUS_IRQ 0x0d #define CFG_STATUS_IRQ_TERMINATION_OR_TAPER BIT(4) +#define CFG_STATUS_IRQ_CHARGE_TIMEOUT BIT(7) #define CFG_ADDRESS 0x0e /* Command registers */ @@ -96,6 +97,9 @@ #define IRQSTAT_C_TERMINATION_STAT BIT(0) #define IRQSTAT_C_TERMINATION_IRQ BIT(1) #define IRQSTAT_C_TAPER_IRQ BIT(3) +#define IRQSTAT_D 0x38 +#define IRQSTAT_D_CHARGE_TIMEOUT_STAT BIT(2) +#define IRQSTAT_D_CHARGE_TIMEOUT_IRQ BIT(3) #define IRQSTAT_E 0x39 #define IRQSTAT_E_USBIN_UV_STAT BIT(0) #define IRQSTAT_E_USBIN_UV_IRQ BIT(1) @@ -109,8 +113,10 @@ #define STAT_B 0x3c #define STAT_C 0x3d #define STAT_C_CHG_ENABLED BIT(0) +#define STAT_C_HOLDOFF_STAT BIT(3) #define STAT_C_CHG_MASK 0x06 #define STAT_C_CHG_SHIFT 1 +#define STAT_C_CHG_TERM BIT(5) #define STAT_C_CHARGER_ERROR BIT(6) #define STAT_E 0x3f @@ -701,7 +707,7 @@ fail: static irqreturn_t smb347_interrupt(int irq, void *data) { struct smb347_charger *smb = data; - unsigned int stat_c, irqstat_e, irqstat_c; + unsigned int stat_c, irqstat_c, irqstat_d, irqstat_e; bool handled = false; int ret; @@ -717,6 +723,12 @@ static irqreturn_t smb347_interrupt(int irq, void *data) return IRQ_NONE; } + ret = regmap_read(smb->regmap, IRQSTAT_D, &irqstat_d); + if (ret < 0) { + dev_warn(smb->dev, "reading IRQSTAT_D failed\n"); + return IRQ_NONE; + } + ret = regmap_read(smb->regmap, IRQSTAT_E, &irqstat_e); if (ret < 0) { dev_warn(smb->dev, "reading IRQSTAT_E failed\n"); @@ -724,13 +736,11 @@ static irqreturn_t smb347_interrupt(int irq, void *data) } /* - * If we get charger error we report the error back to user and - * disable charging. + * If we get charger error we report the error back to user. + * If the error is recovered charging will resume again. */ if (stat_c & STAT_C_CHARGER_ERROR) { - dev_err(smb->dev, "error in charger, disabling charging\n"); - - smb347_charging_disable(smb); + dev_err(smb->dev, "charging stopped due to charger error\n"); power_supply_changed(&smb->battery); handled = true; } @@ -743,6 +753,20 @@ static irqreturn_t smb347_interrupt(int irq, void *data) if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) { if (irqstat_c & IRQSTAT_C_TERMINATION_STAT) power_supply_changed(&smb->battery); + dev_dbg(smb->dev, "going to HW maintenance mode\n"); + handled = true; + } + + /* + * If we got a charger timeout INT that means the charge + * full is not detected with in charge timeout value. + */ + if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_IRQ) { + dev_dbg(smb->dev, "total Charge Timeout INT received\n"); + + if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_STAT) + dev_warn(smb->dev, "charging stopped due to timeout\n"); + power_supply_changed(&smb->battery); handled = true; } @@ -776,6 +800,7 @@ static int smb347_irq_set(struct smb347_charger *smb, bool enable) * Enable/disable interrupts for: * - under voltage * - termination current reached + * - charger timeout * - charger error */ ret = regmap_update_bits(smb->regmap, CFG_FAULT_IRQ, 0xff, @@ -784,7 +809,8 @@ static int smb347_irq_set(struct smb347_charger *smb, bool enable) goto fail; ret = regmap_update_bits(smb->regmap, CFG_STATUS_IRQ, 0xff, - enable ? CFG_STATUS_IRQ_TERMINATION_OR_TAPER : 0); + enable ? (CFG_STATUS_IRQ_TERMINATION_OR_TAPER | + CFG_STATUS_IRQ_CHARGE_TIMEOUT) : 0); if (ret < 0) goto fail; @@ -988,6 +1014,51 @@ static enum power_supply_property smb347_usb_properties[] = { POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, }; +static int smb347_get_charging_status(struct smb347_charger *smb) +{ + int ret, status; + unsigned int val; + + if (!smb347_is_ps_online(smb)) + return POWER_SUPPLY_STATUS_DISCHARGING; + + ret = regmap_read(smb->regmap, STAT_C, &val); + if (ret < 0) + return ret; + + if ((val & STAT_C_CHARGER_ERROR) || + (val & STAT_C_HOLDOFF_STAT)) { + /* + * set to NOT CHARGING upon charger error + * or charging has stopped. + */ + status = POWER_SUPPLY_STATUS_NOT_CHARGING; + } else { + if ((val & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT) { + /* + * set to charging if battery is in pre-charge, + * fast charge or taper charging mode. + */ + status = POWER_SUPPLY_STATUS_CHARGING; + } else if (val & STAT_C_CHG_TERM) { + /* + * set the status to FULL if battery is not in pre + * charge, fast charge or taper charging mode AND + * charging is terminated at least once. + */ + status = POWER_SUPPLY_STATUS_FULL; + } else { + /* + * in this case no charger error or termination + * occured but charging is not in progress!!! + */ + status = POWER_SUPPLY_STATUS_NOT_CHARGING; + } + } + + return status; +} + static int smb347_battery_get_property(struct power_supply *psy, enum power_supply_property prop, union power_supply_propval *val) @@ -1003,14 +1074,10 @@ static int smb347_battery_get_property(struct power_supply *psy, switch (prop) { case POWER_SUPPLY_PROP_STATUS: - if (!smb347_is_ps_online(smb)) { - val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - break; - } - if (smb347_charging_status(smb)) - val->intval = POWER_SUPPLY_STATUS_CHARGING; - else - val->intval = POWER_SUPPLY_STATUS_FULL; + ret = smb347_get_charging_status(smb); + if (ret < 0) + return ret; + val->intval = ret; break; case POWER_SUPPLY_PROP_CHARGE_TYPE: diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c index 15f4d5d8611..f9e70cf0819 100644 --- a/drivers/power/twl4030_charger.c +++ b/drivers/power/twl4030_charger.c @@ -41,16 +41,16 @@ #define TWL4030_STS_VBUS BIT(7) #define TWL4030_STS_USB_ID BIT(2) #define TWL4030_BBCHEN BIT(4) -#define TWL4030_BBSEL_MASK 0b1100 -#define TWL4030_BBSEL_2V5 0b0000 -#define TWL4030_BBSEL_3V0 0b0100 -#define TWL4030_BBSEL_3V1 0b1000 -#define TWL4030_BBSEL_3V2 0b1100 -#define TWL4030_BBISEL_MASK 0b11 -#define TWL4030_BBISEL_25uA 0b00 -#define TWL4030_BBISEL_150uA 0b01 -#define TWL4030_BBISEL_500uA 0b10 -#define TWL4030_BBISEL_1000uA 0b11 +#define TWL4030_BBSEL_MASK 0x0c +#define TWL4030_BBSEL_2V5 0x00 +#define TWL4030_BBSEL_3V0 0x04 +#define TWL4030_BBSEL_3V1 0x08 +#define TWL4030_BBSEL_3V2 0x0c +#define TWL4030_BBISEL_MASK 0x03 +#define TWL4030_BBISEL_25uA 0x00 +#define TWL4030_BBISEL_150uA 0x01 +#define TWL4030_BBISEL_500uA 0x02 +#define TWL4030_BBISEL_1000uA 0x03 /* BCI interrupts */ #define TWL4030_WOVF BIT(0) /* Watchdog overflow */ @@ -534,7 +534,8 @@ static int __init twl4030_bci_probe(struct platform_device *pdev) } ret = request_threaded_irq(bci->irq_chg, NULL, - twl4030_charger_interrupt, 0, pdev->name, bci); + twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name, + bci); if (ret < 0) { dev_err(&pdev->dev, "could not request irq %d, status %d\n", bci->irq_chg, ret); @@ -542,7 +543,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev) } ret = request_threaded_irq(bci->irq_bci, NULL, - twl4030_bci_interrupt, 0, pdev->name, bci); + twl4030_bci_interrupt, IRQF_ONESHOT, pdev->name, bci); if (ret < 0) { dev_err(&pdev->dev, "could not request irq %d, status %d\n", bci->irq_bci, ret); diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c index 1245fe1f48c..e128a813dc2 100644 --- a/drivers/power/wm97xx_battery.c +++ b/drivers/power/wm97xx_battery.c @@ -212,8 +212,10 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) props++; /* POWER_SUPPLY_PROP_VOLTAGE_MIN */ prop = kzalloc(props * sizeof(*prop), GFP_KERNEL); - if (!prop) + if (!prop) { + ret = -ENOMEM; goto err3; + } prop[i++] = POWER_SUPPLY_PROP_PRESENT; if (pdata->charge_gpio >= 0) diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index ef3e6b70117..cd97530205c 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -39,6 +39,21 @@ enum { #define PM8606_DCM_BOOST (0x00) #define PM8606_PWM (0x01) +#define PM8607_MISC2 (0x42) + +/* Power Up Log Register */ +#define PM8607_POWER_UP_LOG (0x3F) + +/* Charger Control Registers */ +#define PM8607_CCNT (0x47) +#define PM8607_CHG_CTRL1 (0x48) +#define PM8607_CHG_CTRL2 (0x49) +#define PM8607_CHG_CTRL3 (0x4A) +#define PM8607_CHG_CTRL4 (0x4B) +#define PM8607_CHG_CTRL5 (0x4C) +#define PM8607_CHG_CTRL6 (0x4D) +#define PM8607_CHG_CTRL7 (0x4E) + /* Backlight Registers */ #define PM8606_WLED1A (0x02) #define PM8606_WLED1B (0x03) @@ -189,6 +204,71 @@ enum { #define PM8607_PD_PREBIAS (0x56) /* prebias time */ #define PM8607_GPADC_MISC1 (0x57) +/* bit definitions of MEAS_EN1*/ +#define PM8607_MEAS_EN1_VBAT (1 << 0) +#define PM8607_MEAS_EN1_VCHG (1 << 1) +#define PM8607_MEAS_EN1_VSYS (1 << 2) +#define PM8607_MEAS_EN1_TINT (1 << 3) +#define PM8607_MEAS_EN1_RFTMP (1 << 4) +#define PM8607_MEAS_EN1_TBAT (1 << 5) +#define PM8607_MEAS_EN1_GPADC2 (1 << 6) +#define PM8607_MEAS_EN1_GPADC3 (1 << 7) + +/* Battery Monitor Registers */ +#define PM8607_GP_BIAS2 (0x5A) +#define PM8607_VBAT_LOWTH (0x5B) +#define PM8607_VCHG_LOWTH (0x5C) +#define PM8607_VSYS_LOWTH (0x5D) +#define PM8607_TINT_LOWTH (0x5E) +#define PM8607_GPADC0_LOWTH (0x5F) +#define PM8607_GPADC1_LOWTH (0x60) +#define PM8607_GPADC2_LOWTH (0x61) +#define PM8607_GPADC3_LOWTH (0x62) +#define PM8607_VBAT_HIGHTH (0x63) +#define PM8607_VCHG_HIGHTH (0x64) +#define PM8607_VSYS_HIGHTH (0x65) +#define PM8607_TINT_HIGHTH (0x66) +#define PM8607_GPADC0_HIGHTH (0x67) +#define PM8607_GPADC1_HIGHTH (0x68) +#define PM8607_GPADC2_HIGHTH (0x69) +#define PM8607_GPADC3_HIGHTH (0x6A) +#define PM8607_IBAT_MEAS1 (0x6B) +#define PM8607_IBAT_MEAS2 (0x6C) +#define PM8607_VBAT_MEAS1 (0x6D) +#define PM8607_VBAT_MEAS2 (0x6E) +#define PM8607_VCHG_MEAS1 (0x6F) +#define PM8607_VCHG_MEAS2 (0x70) +#define PM8607_VSYS_MEAS1 (0x71) +#define PM8607_VSYS_MEAS2 (0x72) +#define PM8607_TINT_MEAS1 (0x73) +#define PM8607_TINT_MEAS2 (0x74) +#define PM8607_GPADC0_MEAS1 (0x75) +#define PM8607_GPADC0_MEAS2 (0x76) +#define PM8607_GPADC1_MEAS1 (0x77) +#define PM8607_GPADC1_MEAS2 (0x78) +#define PM8607_GPADC2_MEAS1 (0x79) +#define PM8607_GPADC2_MEAS2 (0x7A) +#define PM8607_GPADC3_MEAS1 (0x7B) +#define PM8607_GPADC3_MEAS2 (0x7C) +#define PM8607_CCNT_MEAS1 (0x95) +#define PM8607_CCNT_MEAS2 (0x96) +#define PM8607_VBAT_AVG (0x97) +#define PM8607_VCHG_AVG (0x98) +#define PM8607_VSYS_AVG (0x99) +#define PM8607_VBAT_MIN (0x9A) +#define PM8607_VCHG_MIN (0x9B) +#define PM8607_VSYS_MIN (0x9C) +#define PM8607_VBAT_MAX (0x9D) +#define PM8607_VCHG_MAX (0x9E) +#define PM8607_VSYS_MAX (0x9F) + +#define PM8607_GPADC_MISC2 (0x59) +#define PM8607_GPADC0_GP_BIAS_A0 (1 << 0) +#define PM8607_GPADC1_GP_BIAS_A1 (1 << 1) +#define PM8607_GPADC2_GP_BIAS_A2 (1 << 2) +#define PM8607_GPADC3_GP_BIAS_A3 (1 << 3) +#define PM8607_GPADC2_GP_BIAS_OUT2 (1 << 6) + /* RTC Control Registers */ #define PM8607_RTC1 (0xA0) #define PM8607_RTC_COUNTER1 (0xA1) @@ -350,7 +430,8 @@ struct pm860x_touch_pdata { }; struct pm860x_power_pdata { - unsigned fast_charge; /* charge current */ + int max_capacity; + int resistor; }; struct pm860x_platform_data { @@ -375,6 +456,7 @@ struct pm860x_platform_data { struct regulator_init_data *ldo12; struct regulator_init_data *ldo_vibrator; struct regulator_init_data *ldo14; + struct charger_desc *chg_desc; int companion_addr; /* I2C address of companion chip */ int i2c_port; /* Controlled by GI2C or PI2C */ diff --git a/include/linux/platform_data/lp8727.h b/include/linux/platform_data/lp8727.h index ea98c6133d3..47128a50e04 100644 --- a/include/linux/platform_data/lp8727.h +++ b/include/linux/platform_data/lp8727.h @@ -13,32 +13,32 @@ #define _LP8727_H enum lp8727_eoc_level { - EOC_5P, - EOC_10P, - EOC_16P, - EOC_20P, - EOC_25P, - EOC_33P, - EOC_50P, + LP8727_EOC_5P, + LP8727_EOC_10P, + LP8727_EOC_16P, + LP8727_EOC_20P, + LP8727_EOC_25P, + LP8727_EOC_33P, + LP8727_EOC_50P, }; enum lp8727_ichg { - ICHG_90mA, - ICHG_100mA, - ICHG_400mA, - ICHG_450mA, - ICHG_500mA, - ICHG_600mA, - ICHG_700mA, - ICHG_800mA, - ICHG_900mA, - ICHG_1000mA, + LP8727_ICHG_90mA, + LP8727_ICHG_100mA, + LP8727_ICHG_400mA, + LP8727_ICHG_450mA, + LP8727_ICHG_500mA, + LP8727_ICHG_600mA, + LP8727_ICHG_700mA, + LP8727_ICHG_800mA, + LP8727_ICHG_900mA, + LP8727_ICHG_1000mA, }; /** * struct lp8727_chg_param * @eoc_level : end of charge level setting - * @ichg : charging current + * @ichg : charging current */ struct lp8727_chg_param { enum lp8727_eoc_level eoc_level; @@ -47,19 +47,22 @@ struct lp8727_chg_param { /** * struct lp8727_platform_data - * @get_batt_present : check battery status - exists or not - * @get_batt_level : get battery voltage (mV) + * @get_batt_present : check battery status - exists or not + * @get_batt_level : get battery voltage (mV) * @get_batt_capacity : get battery capacity (%) - * @get_batt_temp : get battery temperature - * @ac, @usb : charging parameters each charger type + * @get_batt_temp : get battery temperature + * @ac : charging parameters for AC type charger + * @usb : charging parameters for USB type charger + * @debounce_msec : interrupt debounce time */ struct lp8727_platform_data { u8 (*get_batt_present)(void); u16 (*get_batt_level)(void); u8 (*get_batt_capacity)(void); u8 (*get_batt_temp)(void); - struct lp8727_chg_param ac; - struct lp8727_chg_param usb; + struct lp8727_chg_param *ac; + struct lp8727_chg_param *usb; + unsigned int debounce_msec; }; #endif diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h index cd22029e32a..0e86840eb60 100644 --- a/include/linux/power/charger-manager.h +++ b/include/linux/power/charger-manager.h @@ -109,24 +109,43 @@ struct charger_cable { * struct charger_regulator * @regulator_name: the name of regulator for using charger. * @consumer: the regulator consumer for the charger. + * @externally_control: + * Set if the charger-manager cannot control charger, + * the charger will be maintained with disabled state. * @cables: * the array of charger cables to enable/disable charger * and set current limit according to constratint data of * struct charger_cable if only charger cable included * in the array of charger cables is attached/detached. * @num_cables: the number of charger cables. + * @attr_g: Attribute group for the charger(regulator) + * @attr_name: "name" sysfs entry + * @attr_state: "state" sysfs entry + * @attr_externally_control: "externally_control" sysfs entry + * @attrs: Arrays pointing to attr_name/state/externally_control for attr_g */ struct charger_regulator { /* The name of regulator for charging */ const char *regulator_name; struct regulator *consumer; + /* charger never on when system is on */ + int externally_control; + /* * Store constraint information related to current limit, * each cable have different condition for charging. */ struct charger_cable *cables; int num_cables; + + struct attribute_group attr_g; + struct device_attribute attr_name; + struct device_attribute attr_state; + struct device_attribute attr_externally_control; + struct attribute *attrs[4]; + + struct charger_manager *cm; }; /** @@ -140,7 +159,11 @@ struct charger_regulator { * If it has dropped more than fullbatt_vchkdrop_uV after * fullbatt_vchkdrop_ms, CM will restart charging. * @fullbatt_uV: voltage in microvolt - * If it is not being charged and VBATT >= fullbatt_uV, + * If VBATT >= fullbatt_uV, it is assumed to be full. + * @fullbatt_soc: state of Charge in % + * If state of Charge >= fullbatt_soc, it is assumed to be full. + * @fullbatt_full_capacity: full capacity measure + * If full capacity of battery >= fullbatt_full_capacity, * it is assumed to be full. * @polling_interval_ms: interval in millisecond at which * charger manager will monitor battery health @@ -148,7 +171,7 @@ struct charger_regulator { * Specify where information for existance of battery can be obtained * @psy_charger_stat: the names of power-supply for chargers * @num_charger_regulator: the number of entries in charger_regulators - * @charger_regulators: array of regulator_bulk_data for chargers + * @charger_regulators: array of charger regulators * @psy_fuel_gauge: the name of power-supply for fuel gauge * @temperature_out_of_range: * Determine whether the status is overheat or cold or normal. @@ -158,6 +181,13 @@ struct charger_regulator { * @measure_battery_temp: * true: measure battery temperature * false: measure ambient temperature + * @charging_max_duration_ms: Maximum possible duration for charging + * If whole charging duration exceed 'charging_max_duration_ms', + * cm stop charging. + * @discharging_max_duration_ms: + * Maximum possible duration for discharging with charger cable + * after full-batt. If discharging duration exceed 'discharging + * max_duration_ms', cm start charging. */ struct charger_desc { char *psy_name; @@ -168,6 +198,8 @@ struct charger_desc { unsigned int fullbatt_vchkdrop_ms; unsigned int fullbatt_vchkdrop_uV; unsigned int fullbatt_uV; + unsigned int fullbatt_soc; + unsigned int fullbatt_full_capacity; enum data_source battery_present; @@ -180,6 +212,9 @@ struct charger_desc { int (*temperature_out_of_range)(int *mC); bool measure_battery_temp; + + u64 charging_max_duration_ms; + u64 discharging_max_duration_ms; }; #define PSY_NAME_MAX 30 @@ -194,8 +229,6 @@ struct charger_desc { * @charger_enabled: the state of charger * @fullbatt_vchk_jiffies_at: * jiffies at the time full battery check will occur. - * @fullbatt_vchk_uV: voltage in microvolt - * criteria for full battery * @fullbatt_vchk_work: work queue for full battery check * @emergency_stop: * When setting true, stop charging @@ -206,6 +239,8 @@ struct charger_desc { * saved status of external power before entering suspend-to-RAM * @status_save_batt: * saved status of battery before entering suspend-to-RAM + * @charging_start_time: saved start time of enabling charging + * @charging_end_time: saved end time of disabling charging */ struct charger_manager { struct list_head entry; @@ -218,7 +253,6 @@ struct charger_manager { bool charger_enabled; unsigned long fullbatt_vchk_jiffies_at; - unsigned int fullbatt_vchk_uV; struct delayed_work fullbatt_vchk_work; int emergency_stop; @@ -229,6 +263,9 @@ struct charger_manager { bool status_save_ext_pwr_inserted; bool status_save_batt; + + u64 charging_start_time; + u64 charging_end_time; }; #ifdef CONFIG_CHARGER_MANAGER diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 0bafbb15f29..e5ef45834c3 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -88,6 +88,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_AUTHENTIC, POWER_SUPPLY_PROP_TECHNOLOGY, POWER_SUPPLY_PROP_CYCLE_COUNT, POWER_SUPPLY_PROP_VOLTAGE_MAX, @@ -110,7 +111,9 @@ enum power_supply_property { POWER_SUPPLY_PROP_CHARGE_AVG, POWER_SUPPLY_PROP_CHARGE_COUNTER, POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN, POWER_SUPPLY_PROP_ENERGY_FULL, @@ -248,6 +251,7 @@ static inline bool power_supply_is_amp_property(enum power_supply_property psp) case POWER_SUPPLY_PROP_CHARGE_AVG: case POWER_SUPPLY_PROP_CHARGE_COUNTER: case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: case POWER_SUPPLY_PROP_CURRENT_MAX: case POWER_SUPPLY_PROP_CURRENT_NOW: case POWER_SUPPLY_PROP_CURRENT_AVG: @@ -276,6 +280,7 @@ static inline bool power_supply_is_watt_property(enum power_supply_property psp) case POWER_SUPPLY_PROP_VOLTAGE_AVG: case POWER_SUPPLY_PROP_VOLTAGE_OCV: case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: case POWER_SUPPLY_PROP_POWER_NOW: return 1; default: |