diff options
-rw-r--r-- | include/sound/tlv320dac33-plat.h | 1 | ||||
-rw-r--r-- | sound/soc/codecs/tlv320dac33.c | 90 |
2 files changed, 65 insertions, 26 deletions
diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h index 1aa7bdbc208..6c664965679 100644 --- a/include/sound/tlv320dac33-plat.h +++ b/include/sound/tlv320dac33-plat.h @@ -16,6 +16,7 @@ struct tlv320dac33_platform_data { int power_gpio; int mode1_latency; /* latency caused by the i2c writes in us */ + int auto_fifo_config; /* FIFO config based on the period size */ int keep_bclk; /* Keep the BCLK running in FIFO modes */ u8 burst_bclkdiv; }; diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index ced6fbbc9d9..8651b01ed22 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -60,6 +60,9 @@ #define US_TO_SAMPLES(rate, us) \ (rate / (1000000 / us)) +#define UTHR_FROM_PERIOD_SIZE(samples, playrate, burstrate) \ + ((samples * 5000) / ((burstrate * 5000) / (burstrate - playrate))) + static void dac33_calculate_times(struct snd_pcm_substream *substream); static int dac33_prepare_chip(struct snd_pcm_substream *substream); @@ -107,6 +110,8 @@ struct tlv320dac33_priv { unsigned int nsample; /* burst read amount from host */ int mode1_latency; /* latency caused by the i2c writes in * us */ + int auto_fifo_config; /* Configure the FIFO based on the + * period size */ u8 burst_bclkdiv; /* BCLK divider value in burst mode */ unsigned int burst_rate; /* Interface speed in Burst modes */ @@ -538,13 +543,16 @@ static const struct snd_kcontrol_new dac33_snd_controls[] = { DAC33_LINEL_TO_LLO_VOL, DAC33_LINER_TO_RLO_VOL, 0, 127, 1), }; -static const struct snd_kcontrol_new dac33_nsample_snd_controls[] = { +static const struct snd_kcontrol_new dac33_mode_snd_controls[] = { + SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum, + dac33_get_fifo_mode, dac33_set_fifo_mode), +}; + +static const struct snd_kcontrol_new dac33_fifo_snd_controls[] = { SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0, - dac33_get_nsample, dac33_set_nsample), + dac33_get_nsample, dac33_set_nsample), SOC_SINGLE_EXT("UTHR", 0, 0, MODE7_UTHR, 0, dac33_get_uthr, dac33_set_uthr), - SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum, - dac33_get_fifo_mode, dac33_set_fifo_mode), }; /* Analog bypass */ @@ -1057,24 +1065,38 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream) /* Number of samples under i2c latency */ dac33->alarm_threshold = US_TO_SAMPLES(rate, dac33->mode1_latency); - /* nSample time shall not be shorter than i2c latency */ - dac33->nsample_min = dac33->alarm_threshold; - /* - * nSample should not be bigger than alsa buffer minus - * size of one period to avoid overruns - */ - dac33->nsample_max = substream->runtime->buffer_size - - period_size; - nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - - dac33->alarm_threshold; - if (dac33->nsample_max > nsample_limit) - dac33->nsample_max = nsample_limit; - - /* Correct the nSample if it is outside of the ranges */ - if (dac33->nsample < dac33->nsample_min) - dac33->nsample = dac33->nsample_min; - if (dac33->nsample > dac33->nsample_max) - dac33->nsample = dac33->nsample_max; + if (dac33->auto_fifo_config) { + if (period_size <= dac33->alarm_threshold) + /* + * Configure nSamaple to number of periods, + * which covers the latency requironment. + */ + dac33->nsample = period_size * + ((dac33->alarm_threshold / period_size) + + (dac33->alarm_threshold % period_size ? + 1 : 0)); + else + dac33->nsample = period_size; + } else { + /* nSample time shall not be shorter than i2c latency */ + dac33->nsample_min = dac33->alarm_threshold; + /* + * nSample should not be bigger than alsa buffer minus + * size of one period to avoid overruns + */ + dac33->nsample_max = substream->runtime->buffer_size - + period_size; + nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - + dac33->alarm_threshold; + if (dac33->nsample_max > nsample_limit) + dac33->nsample_max = nsample_limit; + + /* Correct the nSample if it is outside of the ranges */ + if (dac33->nsample < dac33->nsample_min) + dac33->nsample = dac33->nsample_min; + if (dac33->nsample > dac33->nsample_max) + dac33->nsample = dac33->nsample_max; + } dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate, dac33->nsample); @@ -1082,6 +1104,16 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream) dac33->t_stamp2 = 0; break; case DAC33_FIFO_MODE7: + if (dac33->auto_fifo_config) { + dac33->uthr = UTHR_FROM_PERIOD_SIZE( + period_size, + rate, + dac33->burst_rate) + 9; + if (dac33->uthr > MODE7_UTHR) + dac33->uthr = MODE7_UTHR; + if (dac33->uthr < (MODE7_LTHR + 10)) + dac33->uthr = (MODE7_LTHR + 10); + } dac33->mode7_us_to_lthr = SAMPLES_TO_US(substream->runtime->rate, dac33->uthr - MODE7_LTHR + 1); @@ -1379,10 +1411,15 @@ static int dac33_soc_probe(struct platform_device *pdev) snd_soc_add_controls(codec, dac33_snd_controls, ARRAY_SIZE(dac33_snd_controls)); - /* Only add the nSample controls, if we have valid IRQ number */ - if (dac33->irq >= 0) - snd_soc_add_controls(codec, dac33_nsample_snd_controls, - ARRAY_SIZE(dac33_nsample_snd_controls)); + /* Only add the FIFO controls, if we have valid IRQ number */ + if (dac33->irq >= 0) { + snd_soc_add_controls(codec, dac33_mode_snd_controls, + ARRAY_SIZE(dac33_mode_snd_controls)); + /* FIFO usage controls only, if autoio config is not selected */ + if (!dac33->auto_fifo_config) + snd_soc_add_controls(codec, dac33_fifo_snd_controls, + ARRAY_SIZE(dac33_fifo_snd_controls)); + } dac33_add_widgets(codec); @@ -1513,6 +1550,7 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client, /* Pre calculate the burst rate */ dac33->burst_rate = BURST_BASEFREQ_HZ / dac33->burst_bclkdiv / 32; dac33->keep_bclk = pdata->keep_bclk; + dac33->auto_fifo_config = pdata->auto_fifo_config; dac33->mode1_latency = pdata->mode1_latency; if (!dac33->mode1_latency) dac33->mode1_latency = 10000; /* 10ms */ |