48 files changed, 716 insertions, 844 deletions

diff --git a/arch/powerpc/boot/dts/a3m071.dts b/arch/powerpc/boot/dts/a3m071.dts
index 877a28cb77e..bf81b8f9704 100644
--- a/arch/powerpc/boot/dts/a3m071.dts
+++ b/arch/powerpc/boot/dts/a3m071.dts
@@ -17,6 +17,8 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+
 / {
 	model = "anonymous,a3m071";
 	compatible = "anonymous,a3m071";
@@ -30,10 +32,6 @@
 		bus-frequency = <0>; /* From boot loader */
 		system-frequency = <0>; /* From boot loader */
 
-		timer@600 {
-			fsl,has-wdt;
-		};
-
 		spi@f00 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
index fabe7b7d5f1..1f02034c7e9 100644
--- a/arch/powerpc/boot/dts/a4m072.dts
+++ b/arch/powerpc/boot/dts/a4m072.dts
@@ -15,6 +15,11 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+
 / {
 	model = "anonymous,a4m072";
 	compatible = "anonymous,a4m072";
@@ -34,28 +39,6 @@
 			fsl,init-fd-counters = <0x3333>;
 		};
 
-		timer@600 {
-			fsl,has-wdt;
-		};
-
-		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		spi@f00 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index ad3a4f4a2b0..fb580dd84dd 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -12,15 +12,13 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+
 / {
 	model = "schindler,cm5200";
 	compatible = "schindler,cm5200";
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
 		can@900 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index a7511f2d844..955bff629df 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -13,6 +13,9 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { gpio-controller; fsl,has-wdt; };
+&gpt1 { gpio-controller; };
+
 / {
 	model = "intercontrol,digsy-mtc";
 	compatible = "intercontrol,digsy-mtc";
@@ -22,17 +25,6 @@
 	};
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			#gpio-cells = <2>;
-			fsl,has-wdt;
-			gpio-controller;
-		};
-
-		timer@610 {
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index fb288bb882b..5abb46c5cc9 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -12,19 +12,34 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
 / {
 	model = "fsl,lite5200b";
 	compatible = "fsl,lite5200b";
 
+	leds {
+		compatible = "gpio-leds";
+		tmr2 {
+			gpios = <&gpt2 0 1>;
+		};
+		tmr3 {
+			gpios = <&gpt3 0 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led1 { gpios = <&gpio_wkup 2 1>; };
+		led2 { gpios = <&gpio_simple 3 1>; };
+		led3 { gpios = <&gpio_wkup 3 1>; };
+		led4 { gpios = <&gpio_simple 2 1>; };
+	};
+
 	memory {
 		reg = <0x00000000 0x10000000>;	// 256MB
 	};
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
 		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index 48d72f38e5e..b5413cb85f1 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -13,6 +13,8 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+
 / {
 	model = "fsl,media5200";
 	compatible = "fsl,media5200";
@@ -41,10 +43,6 @@
 	soc5200@f0000000 {
 		bus-frequency = <132000000>;// 132 MHz
 
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
 		psc@2000 {	// PSC1
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 0b78e89ac69..bbabd97492a 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -12,26 +12,22 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt6 { // Motion-PRO status LED
+	compatible = "promess,motionpro-led";
+	label = "motionpro-statusled";
+	blink-delay = <100>; // 100 msec
+};
+&gpt7 { // Motion-PRO ready LED
+	compatible = "promess,motionpro-led";
+	label = "motionpro-readyled";
+};
+
 / {
 	model = "promess,motionpro";
 	compatible = "promess,motionpro";
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
-		timer@660 {	// Motion-PRO status LED
-			compatible = "promess,motionpro-led";
-			label = "motionpro-statusled";
-			blink-delay = <100>; // 100 msec
-		};
-
-		timer@670 {	// Motion-PRO ready LED
-			compatible = "promess,motionpro-led";
-			label = "motionpro-readyled";
-		};
-
 		can@900 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
new file mode 100644
index 00000000000..723e292b6b4
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -0,0 +1,410 @@
+/*
+ * base MPC5121 Device Tree Source
+ *
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "mpc5121";
+	compatible = "fsl,mpc5121";
+	#address-cells = <1>;
+	#size-cells = <1>;
+        interrupt-parent = <&ipic>;
+
+	aliases {
+		ethernet0 = &eth0;
+		pci = &pci;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5121@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	/* 32 bytes */
+			i-cache-line-size = <0x20>;	/* 32 bytes */
+			d-cache-size = <0x8000>;	/* L1, 32K */
+			i-cache-size = <0x8000>;	/* L1, 32K */
+			timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */
+			bus-frequency = <198000000>;	/* 198 MHz csb bus */
+			clock-frequency = <396000000>;	/* 396 MHz ppc core */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	/* 256MB at 0 */
+	};
+
+	mbx@20000000 {
+		compatible = "fsl,mpc5121-mbx";
+		reg = <0x20000000 0x4000>;
+		interrupts = <66 0x8>;
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x20000>;	/* 128K at 0x30000000 */
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;	/* 1M at 0x40000000 */
+		interrupts = <6 8>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	localbus@80000020 {
+		compatible = "fsl,mpc5121-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x80000020 0x40>;
+		interrupts = <7 0x8>;
+		ranges = <0x0 0x0 0xfc000000 0x04000000>;
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	/* 66 MHz ips bus */
+
+
+		/*
+		 * IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		/* Watchdog timer */
+		wdt@900 {
+			compatible = "fsl,mpc5121-wdt";
+			reg = <0x900 0x100>;
+		};
+
+		/* Real time clock */
+		rtc@a00 {
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		/* Reset module */
+		reset@e00 {
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		/* Clock control */
+		clock@f00 {
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+		};
+
+		/* Power Management Controller */
+		pmc@1000{
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x8>;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+		};
+
+		can@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x1300 0x80>;
+			interrupts = <12 0x8>;
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x1380 0x80>;
+			interrupts = <13 0x8>;
+		};
+
+		sdhc@1500 {
+			compatible = "fsl,mpc5121-sdhc";
+			reg = <0x1500 0x100>;
+			interrupts = <8 0x8>;
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <9 0x8>;
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1720 0x20>;
+			interrupts = <10 0x8>;
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <11 0x8>;
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+		};
+
+		can@2300 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x2300 0x80>;
+			interrupts = <90 0x8>;
+		};
+
+		can@2380 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x2380 0x80>;
+			interrupts = <91 0x8>;
+		};
+
+		viu@2400 {
+			compatible = "fsl,mpc5121-viu";
+			reg = <0x2400 0x400>;
+			interrupts = <67 0x8>;
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		eth0: ethernet@2800 {
+			device_type = "network";
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+		};
+
+		/* USB1 using external ULPI PHY */
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		/* USB0 using internal UTMI PHY */
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x4000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+		};
+
+		/* IO control */
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		/* LocalPlus controller */
+		lpc@10000 {
+			compatible = "fsl,mpc5121-lpc";
+			reg = <0x10000 0x200>;
+		};
+
+		pata@10200 {
+			compatible = "fsl,mpc5121-pata";
+			reg = <0x10200 0x100>;
+			interrupts = <5 0x8>;
+		};
+
+		/* 512x PSCs are not 52xx PSC compatible */
+
+		/* PSC0 */
+		psc@11000 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11000 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC1 */
+		psc@11100 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC2 */
+		psc@11200 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11200 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC3 */
+		psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			reg = <0x11300 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC4 */
+		psc@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			reg = <0x11400 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC5 */
+		psc@11500 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11500 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC6 */
+		psc@11600 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11600 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC7 */
+		psc@11700 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11700 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC8 */
+		psc@11800 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11800 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC9 */
+		psc@11900 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC10 */
+		psc@11a00 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11a00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC11 */
+		psc@11b00 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11b00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+		};
+
+		dma@14000 {
+			compatible = "fsl,mpc5121-dma";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+		};
+	};
+
+	pci: pci@80008500 {
+		compatible = "fsl,mpc5121-pci";
+		device_type = "pci";
+		interrupts = <1 0x8>;
+		clock-frequency = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80008500 0x100	/* internal registers */
+		       0x80008300 0x8>;	/* config space access registers */
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c9ef6bbe26c..f269b1382ef 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -1,7 +1,7 @@
 /*
  * MPC5121E ADS Device Tree Source
  *
- * Copyright 2007,2008 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,74 +9,26 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5121.dtsi"
 
 / {
 	model = "mpc5121ads";
 	compatible = "fsl,mpc5121ads";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		pci = &pci;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5121@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
-			bus-frequency = <198000000>;	// 198 MHz csb bus
-			clock-frequency = <396000000>;	// 396 MHz ppc core
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	// 256MB at 0
-	};
-
-	mbx@20000000 {
-		compatible = "fsl,mpc5121-mbx";
-		reg = <0x20000000 0x4000>;
-		interrupts = <66 0x8>;
-		interrupt-parent = < &ipic >;
-	};
-
-	sram@30000000 {
-		compatible = "fsl,mpc5121-sram";
-		reg = <0x30000000 0x20000>;		// 128K at 0x30000000
-	};
 
 	nfc@40000000 {
-		compatible = "fsl,mpc5121-nfc";
-		reg = <0x40000000 0x100000>;	// 1M at 0x40000000
-		interrupts = <6 8>;
-		interrupt-parent = < &ipic >;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		// ADS has two Hynix 512MB Nand flash chips in a single
-		// stacked package.
+		/*
+		 * ADS has two Hynix 512MB Nand flash chips in a single
+		 * stacked package.
+		 */
 		chips = <2>;
+
 		nand@0 {
 			label = "nand";
-			reg = <0x00000000 0x40000000>;	// 512MB + 512MB
+			reg = <0x00000000 0x40000000>;	/* 512MB + 512MB */
 		};
 	};
 
 	localbus@80000020 {
-		compatible = "fsl,mpc5121-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x80000020 0x40>;
-
 		ranges = <0x0 0x0 0xfc000000 0x04000000
 			  0x2 0x0 0x82000000 0x00008000>;
 
@@ -87,6 +39,7 @@
 			#size-cells = <1>;
 			bank-width = <4>;
 			device-width = <2>;
+
 			protected@0 {
 				label = "protected";
 				reg = <0x00000000 0x00040000>;  // first sector is protected
@@ -121,91 +74,18 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x2 0xa 0x5>;
-			interrupt-parent = < &ipic >;
-			// irq routing
-			//	all irqs but touch screen are routed to irq0 (ipic 48)
-			//	touch screen is statically routed to irq1 (ipic 17)
-			//	so don't use it here
+			/* irq routing:
+			 * all irqs but touch screen are routed to irq0 (ipic 48)
+			 * touch screen is statically routed to irq1 (ipic 17)
+			 * so don't use it here
+			 */
 			interrupts = <48 0x8>;
 		};
 	};
 
 	soc@80000000 {
-		compatible = "fsl,mpc5121-immr";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		ranges = <0x0 0x80000000 0x400000>;
-		reg = <0x80000000 0x400000>;
-		bus-frequency = <66000000>;	// 66 MHz ips bus
-
-
-		// IPIC
-		// interrupts cell = <intr #, sense>
-		// sense values match linux IORESOURCE_IRQ_* defines:
-		// sense == 8: Level, low assertion
-		// sense == 2: Edge, high-to-low change
-		//
-		ipic: interrupt-controller@c00 {
-			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0xc00 0x100>;
-		};
-
-		rtc@a00 {	// Real time clock
-			compatible = "fsl,mpc5121-rtc";
-			reg = <0xa00 0x100>;
-			interrupts = <79 0x8 80 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		reset@e00 {	// Reset module
-			compatible = "fsl,mpc5121-reset";
-			reg = <0xe00 0x100>;
-		};
-
-		clock@f00 {	// Clock control
-			compatible = "fsl,mpc5121-clock";
-			reg = <0xf00 0x100>;
-		};
-
-		pmc@1000{  //Power Management Controller
-			compatible = "fsl,mpc5121-pmc";
-			reg = <0x1000 0x100>;
-			interrupts = <83 0x2>;
-			interrupt-parent = < &ipic >;
-		};
-
-		gpio@1100 {
-			compatible = "fsl,mpc5121-gpio";
-			reg = <0x1100 0x100>;
-			interrupts = <78 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		can@1300 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <12 0x8>;
-			interrupt-parent = < &ipic >;
-			reg = <0x1300 0x80>;
-		};
-
-		can@1380 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <13 0x8>;
-			interrupt-parent = < &ipic >;
-			reg = <0x1380 0x80>;
-		};
 
 		i2c@1700 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1700 0x20>;
-			interrupts = <9 0x8>;
-			interrupt-parent = < &ipic >;
 			fsl,preserve-clocking;
 
 			hwmon@4a {
@@ -224,196 +104,75 @@
 			};
 		};
 
-		i2c@1720 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1720 0x20>;
-			interrupts = <10 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		i2c@1740 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1740 0x20>;
-			interrupts = <11 0x8>;
-			interrupt-parent = < &ipic >;
+		eth0: ethernet@2800 {
+			phy-handle = <&phy0>;
 		};
 
-		i2ccontrol@1760 {
-			compatible = "fsl,mpc5121-i2c-ctrl";
-			reg = <0x1760 0x8>;
+		can@2300 {
+			status = "disabled";
 		};
 
-		axe@2000 {
-			compatible = "fsl,mpc5121-axe";
-			reg = <0x2000 0x100>;
-			interrupts = <42 0x8>;
-			interrupt-parent = < &ipic >;
+		can@2380 {
+			status = "disabled";
 		};
 
-		display@2100 {
-			compatible = "fsl,mpc5121-diu";
-			reg = <0x2100 0x100>;
-			interrupts = <64 0x8>;
-			interrupt-parent = < &ipic >;
+		viu@2400 {
+			status = "disabled";
 		};
 
 		mdio@2800 {
-			compatible = "fsl,mpc5121-fec-mdio";
-			reg = <0x2800 0x800>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy: ethernet-phy@0 {
+			phy0: ethernet-phy@0 {
 				reg = <1>;
-				device_type = "ethernet-phy";
 			};
 		};
 
-		ethernet@2800 {
-			device_type = "network";
-			compatible = "fsl,mpc5121-fec";
-			reg = <0x2800 0x800>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <4 0x8>;
-			interrupt-parent = < &ipic >;
-			phy-handle = < &phy >;
-			fsl,align-tx-packets = <4>;
+		/* mpc5121ads only uses USB0 */
+		usb@3000 {
+			status = "disabled";
 		};
 
-		// 5121e has two dr usb modules
-		// mpc5121_ads only uses USB0
-
-		// USB1 using external ULPI PHY
-		//usb@3000 {
-		//	compatible = "fsl,mpc5121-usb2-dr";
-		//	reg = <0x3000 0x1000>;
-		//	#address-cells = <1>;
-		//	#size-cells = <0>;
-		//	interrupt-parent = < &ipic >;
-		//	interrupts = <43 0x8>;
-		//	dr_mode = "otg";
-		//	phy_type = "ulpi";
-		//};
-
-		// USB0 using internal UTMI PHY
+		/* USB0 using internal UTMI PHY */
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x4000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = < &ipic >;
-			interrupts = <44 0x8>;
-			dr_mode = "otg";
-			phy_type = "utmi_wide";
+			dr_mode = "host";
 			fsl,invert-drvvbus;
 			fsl,invert-pwr-fault;
 		};
 
-		// IO control
-		ioctl@a000 {
-			compatible = "fsl,mpc5121-ioctl";
-			reg = <0xA000 0x1000>;
-		};
-
-		pata@10200 {
-			compatible = "fsl,mpc5121-pata";
-			reg = <0x10200 0x100>;
-			interrupts = <5 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		// 512x PSCs are not 52xx PSC compatible
-		// PSC3 serial port A aka ttyPSC0
-		serial@11300 {
-			device_type = "serial";
+		/* PSC3 serial port A aka ttyPSC0 */
+		psc@11300 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			// Logical port assignment needed until driver
-			// learns to use aliases
-			port-number = <0>;
-			cell-index = <3>;
-			reg = <0x11300 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
-			rx-fifo-size = <16>;
-			tx-fifo-size = <16>;
 		};
 
-		// PSC4 serial port B aka ttyPSC1
-		serial@11400 {
-			device_type = "serial";
+		/* PSC4 serial port B aka ttyPSC1 */
+		psc@11400 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			// Logical port assignment needed until driver
-			// learns to use aliases
-			port-number = <1>;
-			cell-index = <4>;
-			reg = <0x11400 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
-			rx-fifo-size = <16>;
-			tx-fifo-size = <16>;
 		};
 
-		// PSC5 in ac97 mode
-		ac97@11500 {
+		/* PSC5 in ac97 mode */
+		ac97: psc@11500 {
 			compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
-			cell-index = <5>;
-			reg = <0x11500 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
 			fsl,mode = "ac97-slave";
-			rx-fifo-size = <384>;
-			tx-fifo-size = <384>;
-		};
-
-		pscfifo@11f00 {
-			compatible = "fsl,mpc5121-psc-fifo";
-			reg = <0x11f00 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
+			fsl,rx-fifo-size = <384>;
+			fsl,tx-fifo-size = <384>;
 		};
-
-		dma@14000 {
-			compatible = "fsl,mpc5121-dma";
-			reg = <0x14000 0x1800>;
-			interrupts = <65 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
 	};
 
 	pci: pci@80008500 {
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
-				// IDSEL 0x15 - Slot 1 PCI
+				/* IDSEL 0x15 - Slot 1 PCI */
 				 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
 				 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
 				 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
 				 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
 
-				// IDSEL 0x16 - Slot 2 MiniPCI
+				/* IDSEL 0x16 - Slot 2 MiniPCI */
 				 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
 				 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
 
-				// IDSEL 0x17 - Slot 3 MiniPCI
+				/* IDSEL 0x17 - Slot 3 MiniPCI */
 				 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
 				 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
 				>;
-		interrupt-parent = < &ipic >;
-		interrupts = <1 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
-		clock-frequency = <0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0x80008500 0x100		/* internal registers */
-		       0x80008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc5121-pci";
-		device_type = "pci";
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
index 39ed65a44c5..969b2200b2f 100644
--- a/arch/powerpc/boot/dts/mpc5200b.dtsi
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -64,50 +64,59 @@
 			reg = <0x500 0x80>;
 		};
 
-		timer@600 {	// General Purpose Timer
+		gpt0: timer@600 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x600 0x10>;
 			interrupts = <1 9 0>;
+			// add 'fsl,has-wdt' to enable watchdog
 		};
 
-		timer@610 {	// General Purpose Timer
+		gpt1: timer@610 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x610 0x10>;
 			interrupts = <1 10 0>;
 		};
 
-		timer@620 {	// General Purpose Timer
+		gpt2: timer@620 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x620 0x10>;
 			interrupts = <1 11 0>;
 		};
 
-		timer@630 {	// General Purpose Timer
+		gpt3: timer@630 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x630 0x10>;
 			interrupts = <1 12 0>;
 		};
 
-		timer@640 {	// General Purpose Timer
+		gpt4: timer@640 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x640 0x10>;
 			interrupts = <1 13 0>;
 		};
 
-		timer@650 {	// General Purpose Timer
+		gpt5: timer@650 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x650 0x10>;
 			interrupts = <1 14 0>;
 		};
 
-		timer@660 {	// General Purpose Timer
+		gpt6: timer@660 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x660 0x10>;
 			interrupts = <1 15 0>;
 		};
 
-		timer@670 {	// General Purpose Timer
+		gpt7: timer@670 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x670 0x10>;
 			interrupts = <1 16 0>;
 		};
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
index 21d34720fcc..d3a792bb5c1 100644
--- a/arch/powerpc/boot/dts/mucmc52.dts
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -13,47 +13,23 @@
 
 /include/ "mpc5200b.dtsi"
 
+/* Timer pins that need to be in GPIO mode */
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
+/* Disabled timers */
+&gpt4 { status = "disabled"; };
+&gpt5 { status = "disabled"; };
+&gpt6 { status = "disabled"; };
+&gpt7 { status = "disabled"; };
+
 / {
 	model = "manroland,mucmc52";
 	compatible = "manroland,mucmc52";
 
 	soc5200@f0000000 {
-		gpt0: timer@600 {	// GPT 0 in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		timer@640 {
-			status = "disabled";
-		};
-
-		timer@650 {
-			status = "disabled";
-		};
-
-		timer@660 {
-			status = "disabled";
-		};
-
-		timer@670 {
-			status = "disabled";
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
index 24f66803929..cf073e693f2 100644
--- a/arch/powerpc/boot/dts/o2d.dtsi
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -12,6 +12,13 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 {
+	gpio-controller;
+	fsl,has-wdt;
+	fsl,wdt-on-boot = <0>;
+};
+&gpt1 { gpio-controller; };
+
 / {
 	model = "ifm,o2d";
 	compatible = "ifm,o2d";
@@ -22,24 +29,6 @@
 
 	soc5200@f0000000 {
 
-		gpio_simple: gpio@b00 {
-		};
-
-		timer@600 {	// General Purpose Timer
-			#gpio-cells = <2>;
-			gpio-controller;
-			fsl,has-wdt;
-			fsl,wdt-on-boot = <0>;
-		};
-
-		timer@610 {
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		timer7: timer@670 {
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};
@@ -118,7 +107,7 @@
 		csi@3,0 {
 			compatible = "ifm,o2d-csi";
 			reg = <3 0 0x00100000>;
-			ifm,csi-clk-handle = <&timer7>;
+			ifm,csi-clk-handle = <&gpt7>;
 			gpios = <&gpio_simple 23 0	/* imag_capture */
 				 &gpio_simple 26 0	/* imag_reset */
 				 &gpio_simple 29 0>;	/* imag_master_en */
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 96512c05803..192e66af000 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -14,51 +14,19 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
 / {
 	model = "phytec,pcm030";
 	compatible = "phytec,pcm030";
 
 	soc5200@f0000000 {
-		timer@600 {		// General Purpose Timer
-			fsl,has-wdt;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		audioplatform: psc@2000 { /* PSC1 in ac97 mode */
 			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 1dd478bfff9..96b139bf50e 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -14,6 +14,14 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
 / {
 	model = "phytec,pcm032";
 	compatible = "phytec,pcm032";
@@ -23,43 +31,6 @@
 	};
 
 	soc5200@f0000000 {
-		timer@600 {		// General Purpose Timer
-			fsl,has-wdt;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		psc@2000 {	/* PSC1 is ac97 */
 			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts
index 94dfa5c9a7f..0b069477838 100644
--- a/arch/powerpc/boot/dts/pdm360ng.dts
+++ b/arch/powerpc/boot/dts/pdm360ng.dts
@@ -13,7 +13,7 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5121.dtsi"
 
 / {
 	model = "pdm360ng";
@@ -22,38 +22,12 @@
 	#size-cells = <1>;
 	interrupt-parent = <&ipic>;
 
-	aliases {
-		ethernet0 = &eth0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5121@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
-			bus-frequency = <198000000>;	// 198 MHz csb bus
-			clock-frequency = <396000000>;	// 396 MHz ppc core
-		};
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>;	// 512MB at 0
 	};
 
 	nfc@40000000 {
-		compatible = "fsl,mpc5121-nfc";
-		reg = <0x40000000 0x100000>;
-		interrupts = <0x6 0x8>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		bank-width = <0x1>;
 		chips = <0x1>;
 
@@ -63,17 +37,7 @@
 		};
 	};
 
-	sram@50000000 {
-		compatible = "fsl,mpc5121-sram";
-		reg = <0x50000000 0x20000>;	// 128K at 0x50000000
-	};
-
 	localbus@80000020 {
-		compatible = "fsl,mpc5121-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x80000020 0x40>;
-
 		ranges = <0x0 0x0 0xf0000000 0x10000000   /* Flash */
 			  0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
 
@@ -129,74 +93,8 @@
 	};
 
 	soc@80000000 {
-		compatible = "fsl,mpc5121-immr";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		ranges = <0x0 0x80000000 0x400000>;
-		reg = <0x80000000 0x400000>;
-		bus-frequency = <66000000>;	// 66 MHz ips bus
-
-		// IPIC
-		// interrupts cell = <intr #, sense>
-		// sense values match linux IORESOURCE_IRQ_* defines:
-		// sense == 8: Level, low assertion
-		// sense == 2: Edge, high-to-low change
-		//
-		ipic: interrupt-controller@c00 {
-			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0xc00 0x100>;
-		};
-
-		rtc@a00 {	// Real time clock
-			compatible = "fsl,mpc5121-rtc";
-			reg = <0xa00 0x100>;
-			interrupts = <79 0x8 80 0x8>;
-		};
-
-		reset@e00 {	// Reset module
-			compatible = "fsl,mpc5121-reset";
-			reg = <0xe00 0x100>;
-		};
-
-		clock@f00 {	// Clock control
-			compatible = "fsl,mpc5121-clock";
-			reg = <0xf00 0x100>;
-		};
-
-		pmc@1000{	//Power Management Controller
-			compatible = "fsl,mpc5121-pmc";
-			reg = <0x1000 0x100>;
-			interrupts = <83 0x2>;
-		};
-
-		gpio@1100 {
-			compatible = "fsl,mpc5121-gpio";
-			reg = <0x1100 0x100>;
-			interrupts = <78 0x8>;
-		};
-
-		can@1300 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <12 0x8>;
-			reg = <0x1300 0x80>;
-		};
-
-		can@1380 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <13 0x8>;
-			reg = <0x1380 0x80>;
-		};
 
 		i2c@1700 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c";
-			reg = <0x1700 0x20>;
-			interrupts = <0x9 0x8>;
 			fsl,preserve-clocking;
 
 			eeprom@50 {
@@ -210,201 +108,92 @@
 			};
 		};
 
-		i2c@1740 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c";
-			reg = <0x1740 0x20>;
-			interrupts = <0xb 0x8>;
-			fsl,preserve-clocking;
-		};
-
-		i2ccontrol@1760 {
-			compatible = "fsl,mpc5121-i2c-ctrl";
-			reg = <0x1760 0x8>;
-		};
-
-		axe@2000 {
-			compatible = "fsl,mpc5121-axe";
-			reg = <0x2000 0x100>;
-			interrupts = <42 0x8>;
-		};
-
-		display@2100 {
-			compatible = "fsl,mpc5121-diu";
-			reg = <0x2100 0x100>;
-			interrupts = <64 0x8>;
+		i2c@1720 {
+			status = "disabled";
 		};
 
-		can@2300 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <90 0x8>;
-			reg = <0x2300 0x80>;
-		};
-
-		can@2380 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <91 0x8>;
-			reg = <0x2380 0x80>;
+		i2c@1740 {
+			fsl,preserve-clocking;
 		};
 
-		viu@2400 {
-			compatible = "fsl,mpc5121-viu";
-			reg = <0x2400 0x400>;
-			interrupts = <67 0x8>;
+		ethernet@2800 {
+			phy-handle = <&phy0>;
 		};
 
 		mdio@2800 {
-			compatible = "fsl,mpc5121-fec-mdio";
-			reg = <0x2800 0x200>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy: ethernet-phy@0 {
+			phy0: ethernet-phy@1f {
 				compatible = "smsc,lan8700";
 				reg = <0x1f>;
 			};
 		};
 
-		eth0: ethernet@2800 {
-			compatible = "fsl,mpc5121-fec";
-			reg = <0x2800 0x200>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <4 0x8>;
-			phy-handle = < &phy >;
-		};
-
-		// USB1 using external ULPI PHY
+		/* USB1 using external ULPI PHY */
 		usb@3000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x3000 0x600>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <43 0x8>;
 			dr_mode = "host";
-			phy_type = "ulpi";
 		};
 
-		// USB0 using internal UTMI PHY
+		/* USB0 using internal UTMI PHY */
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x4000 0x600>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <44 0x8>;
-			dr_mode = "otg";
-			phy_type = "utmi_wide";
 			fsl,invert-pwr-fault;
 		};
 
-		// IO control
-		ioctl@a000 {
-			compatible = "fsl,mpc5121-ioctl";
-			reg = <0xA000 0x1000>;
-		};
-
-		// 512x PSCs are not 52xx PSCs compatible
-		serial@11000 {
+		psc@11000 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <0>;
-			reg = <0x11000 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11100 {
+		psc@11100 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <1>;
-			reg = <0x11100 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11200 {
+		psc@11200 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <2>;
-			reg = <0x11200 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11300 {
+		psc@11300 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <3>;
-			reg = <0x11300 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11400 {
+		psc@11400 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <4>;
-			reg = <0x11400 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11600 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <6>;
-			reg = <0x11600 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
+		psc@11500 {
+			status = "disabled";
 		};
 
-		serial@11800 {
+		psc@11600 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <8>;
-			reg = <0x11800 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11B00 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <11>;
-			reg = <0x11B00 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
+		psc@11700 {
+			status = "disabled";
 		};
 
-		pscfifo@11f00 {
-			compatible = "fsl,mpc5121-psc-fifo";
-			reg = <0x11f00 0x100>;
-			interrupts = <40 0x8>;
+		psc@11800 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 		};
 
-		spi@11900 {
+		psc@11900 {
 			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
-			cell-index = <9>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x11900 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 
-			// 7845 touch screen controller
+			/* ADS7845 touch screen controller */
 			ts@0 {
 				compatible = "ti,ads7846";
 				reg = <0x0>;
 				spi-max-frequency = <3000000>;
-				// pen irq is GPIO25
+				/* pen irq is GPIO25 */
 				interrupts = <78 0x8>;
 			};
 		};
 
-		dma@14000 {
-			compatible = "fsl,mpc5121-dma";
-			reg = <0x14000 0x1800>;
-			interrupts = <65 0x8>;
+		psc@11a00 {
+			status = "disabled";
+		};
+
+		psc@11b00 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
index ba83d5488ec..5c462194ef0 100644
--- a/arch/powerpc/boot/dts/uc101.dts
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -13,54 +13,20 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
 / {
 	model = "manroland,uc101";
 	compatible = "manroland,uc101";
 
 	soc5200@f0000000 {
-		gpt0: timer@600 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h
index 8c0ab2ca689..885c040d619 100644
--- a/arch/powerpc/include/asm/mpc5121.h
+++ b/arch/powerpc/include/asm/mpc5121.h
@@ -53,4 +53,21 @@ struct mpc512x_ccm {
 	u32	m4ccr;	/* MSCAN4 CCR */
 	u8	res[0x98]; /* Reserved */
 };
+
+/*
+ * LPC Module
+ */
+struct mpc512x_lpc {
+	u32	cs_cfg[8];	/* CS config */
+	u32	cs_ctrl;	/* CS Control Register */
+	u32	cs_status;	/* CS Status Register */
+	u32	burst_ctrl;	/* CS Burst Control Register */
+	u32	deadcycle_ctrl;	/* CS Deadcycle Control Register */
+	u32	holdcycle_ctrl;	/* CS Holdcycle Control Register */
+	u32	alt;		/* Address Latch Timing Register */
+};
+
+int mpc512x_cs_config(unsigned int cs, u32 val);
+int __init mpc5121_clk_init(void);
+
 #endif /* __ASM_POWERPC_MPC5121_H__ */
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index 9f771e05457..52d57d28172 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -26,6 +26,7 @@
 
 #include <linux/of_platform.h>
 #include <asm/mpc5xxx.h>
+#include <asm/mpc5121.h>
 #include <asm/clk_interface.h>
 
 #undef CLK_DEBUG
@@ -122,7 +123,7 @@ struct mpc512x_clockctl {
 	u32 dccr;		/* DIU Clk Cnfg Reg */
 };
 
-struct mpc512x_clockctl __iomem *clockctl;
+static struct mpc512x_clockctl __iomem *clockctl;
 
 static int mpc5121_clk_enable(struct clk *clk)
 {
@@ -184,7 +185,7 @@ static unsigned long spmf_mult(void)
 		36, 40, 44, 48,
 		52, 56, 60, 64
 	};
-	int spmf = (clockctl->spmr >> 24) & 0xf;
+	int spmf = (in_be32(&clockctl->spmr) >> 24) & 0xf;
 	return spmf_to_mult[spmf];
 }
 
@@ -206,7 +207,7 @@ static unsigned long sysdiv_div_x_2(void)
 		52, 56, 58, 62,
 		60, 64, 66,
 	};
-	int sysdiv = (clockctl->scfr2 >> 26) & 0x3f;
+	int sysdiv = (in_be32(&clockctl->scfr2) >> 26) & 0x3f;
 	return sysdiv_to_div_x_2[sysdiv];
 }
 
@@ -230,7 +231,7 @@ static unsigned long sys_to_ref(unsigned long rate)
 
 static long ips_to_ref(unsigned long rate)
 {
-	int ips_div = (clockctl->scfr1 >> 23) & 0x7;
+	int ips_div = (in_be32(&clockctl->scfr1) >> 23) & 0x7;
 
 	rate *= ips_div;	/* csb_clk = ips_clk * ips_div */
 	rate *= 2;		/* sys_clk = csb_clk * 2 */
@@ -284,7 +285,7 @@ static struct clk sys_clk = {
 
 static void diu_clk_calc(struct clk *clk)
 {
-	int diudiv_x_2 = clockctl->scfr1 & 0xff;
+	int diudiv_x_2 = in_be32(&clockctl->scfr1) & 0xff;
 	unsigned long rate;
 
 	rate = sys_clk.rate;
@@ -311,7 +312,7 @@ static void half_clk_calc(struct clk *clk)
 
 static void generic_div_clk_calc(struct clk *clk)
 {
-	int div = (clockctl->scfr1 >> clk->div_shift) & 0x7;
+	int div = (in_be32(&clockctl->scfr1) >> clk->div_shift) & 0x7;
 
 	clk->rate = clk->parent->rate / div;
 }
@@ -329,7 +330,7 @@ static struct clk csb_clk = {
 
 static void e300_clk_calc(struct clk *clk)
 {
-	int spmf = (clockctl->spmr >> 16) & 0xf;
+	int spmf = (in_be32(&clockctl->spmr) >> 16) & 0xf;
 	int ratex2 = clk->parent->rate * spmf;
 
 	clk->rate = ratex2 / 2;
@@ -551,7 +552,7 @@ static struct clk ac97_clk = {
 	.calc = ac97_clk_calc,
 };
 
-struct clk *rate_clks[] = {
+static struct clk *rate_clks[] = {
 	&ref_clk,
 	&sys_clk,
 	&diu_clk,
@@ -607,7 +608,7 @@ static void rate_clks_init(void)
  * There are two clk enable registers with 32 enable bits each
  * psc clocks and device clocks are all stored in dev_clks
  */
-struct clk dev_clks[2][32];
+static struct clk dev_clks[2][32];
 
 /*
  * Given a psc number return the dev_clk
@@ -648,12 +649,12 @@ static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
 	out_be32(&clockctl->pccr[pscnum], 0x00020000);
 	out_be32(&clockctl->pccr[pscnum], 0x00030000);
 
-	if (clockctl->pccr[pscnum] & 0x80) {
+	if (in_be32(&clockctl->pccr[pscnum]) & 0x80) {
 		clk->rate = spdif_rxclk.rate;
 		return;
 	}
 
-	switch ((clockctl->pccr[pscnum] >> 14) & 0x3) {
+	switch ((in_be32(&clockctl->pccr[pscnum]) >> 14) & 0x3) {
 	case 0:
 		mclk_src = sys_clk.rate;
 		break;
@@ -668,7 +669,7 @@ static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
 		break;
 	}
 
-	mclk_div = ((clockctl->pccr[pscnum] >> 17) & 0x7fff) + 1;
+	mclk_div = ((in_be32(&clockctl->pccr[pscnum]) >> 17) & 0x7fff) + 1;
 	clk->rate = mclk_src / mclk_div;
 }
 
@@ -680,13 +681,12 @@ static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
 static void psc_clks_init(void)
 {
 	struct device_node *np;
-	const u32 *cell_index;
 	struct platform_device *ofdev;
+	u32 reg;
 
 	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
-		cell_index = of_get_property(np, "cell-index", NULL);
-		if (cell_index) {
-			int pscnum = *cell_index;
+		if (!of_property_read_u32(np, "reg", &reg)) {
+			int pscnum = (reg & 0xf00) >> 8;
 			struct clk *clk = psc_dev_clk(pscnum);
 
 			clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL;
@@ -696,7 +696,7 @@ static void psc_clks_init(void)
 			 * AC97 is special rate clock does
 			 * not go through normal path
 			 */
-			if (strcmp("ac97", np->name) == 0)
+			if (of_device_is_compatible(np, "fsl,mpc5121-psc-ac97"))
 				clk->rate = ac97_clk.rate;
 			else
 				psc_calc_rate(clk, pscnum, np);
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index c7f47cfa9c2..d30235b7e3f 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -426,8 +426,38 @@ void __init mpc512x_psc_fifo_init(void)
 
 void __init mpc512x_init(void)
 {
-	mpc512x_declare_of_platform_devices();
 	mpc5121_clk_init();
+	mpc512x_declare_of_platform_devices();
 	mpc512x_restart_init();
 	mpc512x_psc_fifo_init();
 }
+
+/**
+ * mpc512x_cs_config - Setup chip select configuration
+ * @cs: chip select number
+ * @val: chip select configuration value
+ *
+ * Perform chip select configuration for devices on LocalPlus Bus.
+ * Intended to dynamically reconfigure the chip select parameters
+ * for configurable devices on the bus.
+ */
+int mpc512x_cs_config(unsigned int cs, u32 val)
+{
+	static struct mpc512x_lpc __iomem *lpc;
+	struct device_node *np;
+
+	if (cs > 7)
+		return -EINVAL;
+
+	if (!lpc) {
+		np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-lpc");
+		lpc = of_iomap(np, 0);
+		of_node_put(np);
+		if (!lpc)
+			return -ENOMEM;
+	}
+
+	out_be32(&lpc->cs_cfg[cs], val);
+	return 0;
+}
+EXPORT_SYMBOL(mpc512x_cs_config);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index f9f4537f546..be7b1aa4d54 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -20,9 +20,9 @@
 #include <asm/mpc52xx.h>
 #include <asm/time.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/bestcomm_priv.h>
-#include <sysdev/bestcomm/gen_bd.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
 
 MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
 MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver");
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 48a920d5148..52de8bccfb3 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -352,8 +352,6 @@ config OF_RTC
 	  Uses information from the OF or flattened device tree to instantiate
 	  platform devices for direct mapped RTC chips like the DS1742 or DS1743.
 
-source "arch/powerpc/sysdev/bestcomm/Kconfig"
-
 config SIMPLE_GPIO
 	bool "Support for simple, memory-mapped GPIO controllers"
 	depends on PPC
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index eca3d19304c..b0a518e9759 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_SIMPLE_GPIO)	+= simple_gpio.o
 obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o fsl_rmu.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
-obj-$(CONFIG_PPC_BESTCOMM)	+= bestcomm/
 mv64x60-$(CONFIG_PCI)		+= mv64x60_pci.o
 obj-$(CONFIG_MV64X60)		+= $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
 				   mv64x60_udbg.o
diff --git a/arch/powerpc/sysdev/mpc5xxx_clocks.c b/arch/powerpc/sysdev/mpc5xxx_clocks.c
index 96f815a55df..5492dc5f56f 100644
--- a/arch/powerpc/sysdev/mpc5xxx_clocks.c
+++ b/arch/powerpc/sysdev/mpc5xxx_clocks.c
@@ -9,9 +9,9 @@
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/export.h>
+#include <asm/mpc5xxx.h>
 
-unsigned int
-mpc5xxx_get_bus_frequency(struct device_node *node)
+unsigned long mpc5xxx_get_bus_frequency(struct device_node *node)
 {
 	struct device_node *np;
 	const unsigned int *p_bus_freq = NULL;
diff --git a/drivers/Makefile b/drivers/Makefile
index 7863b9fee50..d8372ab2e4c 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_PNP)		+= pnp/
 obj-y				+= amba/
 # Many drivers will want to use DMA so this has to be made available
 # really early.
-obj-$(CONFIG_DMA_ENGINE)	+= dma/
+obj-$(CONFIG_DMADEVICES)	+= dma/
 
 obj-$(CONFIG_VIRTIO)		+= virtio/
 obj-$(CONFIG_XEN)		+= xen/
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 652f57e8348..3a8fb28b71f 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -26,9 +26,9 @@
 #include <asm/prom.h>
 #include <asm/mpc52xx.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/bestcomm_priv.h>
-#include <sysdev/bestcomm/ata.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/ata.h>
 
 #define DRV_NAME	"mpc52xx_ata"
 
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index d4c12180c65..40179e749f0 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -125,6 +125,8 @@ config MPC512X_DMA
 	---help---
 	  Enable support for the Freescale MPC512x built-in DMA engine.
 
+source "drivers/dma/bestcomm/Kconfig"
+
 config MV_XOR
 	bool "Marvell XOR engine support"
 	depends on PLAT_ORION
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 7428feaa870..642d96736cf 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
+obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/drivers/dma/bestcomm/Kconfig
index 29e427085ef..29e427085ef 100644
--- a/arch/powerpc/sysdev/bestcomm/Kconfig
+++ b/drivers/dma/bestcomm/Kconfig
diff --git a/arch/powerpc/sysdev/bestcomm/Makefile b/drivers/dma/bestcomm/Makefile
index aed2df2a658..aed2df2a658 100644
--- a/arch/powerpc/sysdev/bestcomm/Makefile
+++ b/drivers/dma/bestcomm/Makefile
diff --git a/arch/powerpc/sysdev/bestcomm/ata.c b/drivers/dma/bestcomm/ata.c
index 901c9f91e5d..2fd87f83cf9 100644
--- a/arch/powerpc/sysdev/bestcomm/ata.c
+++ b/drivers/dma/bestcomm/ata.c
@@ -18,9 +18,9 @@
 #include <linux/types.h>
 #include <asm/io.h>
 
-#include "bestcomm.h"
-#include "bestcomm_priv.h"
-#include "ata.h"
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/ata.h>
 
 
 /* ======================================================================== */
diff --git a/arch/powerpc/sysdev/bestcomm/bcom_ata_task.c b/drivers/dma/bestcomm/bcom_ata_task.c
index cc6049a4e46..cc6049a4e46 100644
--- a/arch/powerpc/sysdev/bestcomm/bcom_ata_task.c
+++ b/drivers/dma/bestcomm/bcom_ata_task.c
diff --git a/arch/powerpc/sysdev/bestcomm/bcom_fec_rx_task.c b/drivers/dma/bestcomm/bcom_fec_rx_task.c
index a1ad6a02fce..a1ad6a02fce 100644
--- a/arch/powerpc/sysdev/bestcomm/bcom_fec_rx_task.c
+++ b/drivers/dma/bestcomm/bcom_fec_rx_task.c
diff --git a/arch/powerpc/sysdev/bestcomm/bcom_fec_tx_task.c b/drivers/dma/bestcomm/bcom_fec_tx_task.c
index b1c495c3a65..b1c495c3a65 100644
--- a/arch/powerpc/sysdev/bestcomm/bcom_fec_tx_task.c
+++ b/drivers/dma/bestcomm/bcom_fec_tx_task.c
diff --git a/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_rx_task.c b/drivers/dma/bestcomm/bcom_gen_bd_rx_task.c
index efee022b025..efee022b025 100644
--- a/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_rx_task.c
+++ b/drivers/dma/bestcomm/bcom_gen_bd_rx_task.c
diff --git a/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_tx_task.c b/drivers/dma/bestcomm/bcom_gen_bd_tx_task.c
index c605aa42ecb..c605aa42ecb 100644
--- a/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_tx_task.c
+++ b/drivers/dma/bestcomm/bcom_gen_bd_tx_task.c
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/drivers/dma/bestcomm/bestcomm.c
index d9130630f7e..3a189460328 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/drivers/dma/bestcomm/bestcomm.c
@@ -23,9 +23,9 @@
 #include <asm/irq.h>
 #include <asm/mpc52xx.h>
 
-#include "sram.h"
-#include "bestcomm_priv.h"
-#include "bestcomm.h"
+#include <linux/fsl/bestcomm/sram.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include "linux/fsl/bestcomm/bestcomm.h"
 
 #define DRIVER_NAME "bestcomm-core"
 
diff --git a/arch/powerpc/sysdev/bestcomm/fec.c b/drivers/dma/bestcomm/fec.c
index 957a988d23e..7f1fb1c999e 100644
--- a/arch/powerpc/sysdev/bestcomm/fec.c
+++ b/drivers/dma/bestcomm/fec.c
@@ -16,9 +16,9 @@
 #include <linux/types.h>
 #include <asm/io.h>
 
-#include "bestcomm.h"
-#include "bestcomm_priv.h"
-#include "fec.h"
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/fec.h>
 
 
 /* ======================================================================== */
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/drivers/dma/bestcomm/gen_bd.c
index e0a53e3147b..1a5b22d8812 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.c
+++ b/drivers/dma/bestcomm/gen_bd.c
@@ -21,9 +21,9 @@
 #include <asm/mpc52xx.h>
 #include <asm/mpc52xx_psc.h>
 
-#include "bestcomm.h"
-#include "bestcomm_priv.h"
-#include "gen_bd.h"
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
 
 
 /* ======================================================================== */
diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/drivers/dma/bestcomm/sram.c
index b6db23e085f..5e2ed30ba2c 100644
--- a/arch/powerpc/sysdev/bestcomm/sram.c
+++ b/drivers/dma/bestcomm/sram.c
@@ -23,7 +23,7 @@
 #include <asm/io.h>
 #include <asm/mmu.h>
 
-#include "sram.h"
+#include <linux/fsl/bestcomm/sram.h>
 
 
 /* Struct keeping our 'state' */
diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c
index 817d081d2cd..85e776d500a 100644
--- a/drivers/net/ethernet/freescale/fec_mpc52xx.c
+++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c
@@ -40,8 +40,8 @@
 #include <asm/delay.h>
 #include <asm/mpc52xx.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/fec.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/fec.h>
 
 #include "fec_mpc52xx.h"
 
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 19cfd7a9256..41fbd9453c5 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -944,7 +944,7 @@ static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel)
 #define PF_COMP_0_MASK		0x0000000F
 #define PF_COMP_0_SHIFT		0
 
-#define MAKE_PF(alpha, red, blue, green, size, c0, c1, c2, c3) \
+#define MAKE_PF(alpha, red, green, blue, size, c0, c1, c2, c3) \
 	cpu_to_le32(PF_BYTE_F | (alpha << PF_ALPHA_C_SHIFT) | \
 	(blue << PF_BLUE_C_SHIFT) | (green << PF_GREEN_C_SHIFT) | \
 	(red << PF_RED_C_SHIFT) | (c3 << PF_COMP_3_SHIFT) | \
@@ -954,10 +954,10 @@ static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel)
 	switch (bits_per_pixel) {
 	case 32:
 		/* 0x88883316 */
-		return MAKE_PF(3, 2, 0, 1, 3, 8, 8, 8, 8);
+		return MAKE_PF(3, 2, 1, 0, 3, 8, 8, 8, 8);
 	case 24:
 		/* 0x88082219 */
-		return MAKE_PF(4, 0, 1, 2, 2, 0, 8, 8, 8);
+		return MAKE_PF(4, 0, 1, 2, 2, 8, 8, 8, 0);
 	case 16:
 		/* 0x65053118 */
 		return MAKE_PF(4, 2, 1, 0, 1, 5, 6, 5, 0);
@@ -1232,6 +1232,16 @@ static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
 	return 0;
 }
 
+static inline void fsl_diu_enable_interrupts(struct fsl_diu_data *data)
+{
+	u32 int_mask = INT_UNDRUN; /* enable underrun detection */
+
+	if (IS_ENABLED(CONFIG_NOT_COHERENT_CACHE))
+		int_mask |= INT_VSYNC; /* enable vertical sync */
+
+	clrbits32(&data->diu_reg->int_mask, int_mask);
+}
+
 /* turn on fb if count == 1
  */
 static int fsl_diu_open(struct fb_info *info, int user)
@@ -1251,19 +1261,7 @@ static int fsl_diu_open(struct fb_info *info, int user)
 		if (res < 0)
 			mfbi->count--;
 		else {
-			struct fsl_diu_data *data = mfbi->parent;
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-			/*
-			 * Enable underrun detection and vertical sync
-			 * interrupts.
-			 */
-			clrbits32(&data->diu_reg->int_mask,
-				  INT_UNDRUN | INT_VSYNC);
-#else
-			/* Enable underrun detection */
-			clrbits32(&data->diu_reg->int_mask, INT_UNDRUN);
-#endif
+			fsl_diu_enable_interrupts(mfbi->parent);
 			fsl_diu_enable_panel(info);
 		}
 	}
@@ -1283,9 +1281,18 @@ static int fsl_diu_release(struct fb_info *info, int user)
 	mfbi->count--;
 	if (mfbi->count == 0) {
 		struct fsl_diu_data *data = mfbi->parent;
+		bool disable = true;
+		int i;
 
-		/* Disable interrupts */
-		out_be32(&data->diu_reg->int_mask, 0xffffffff);
+		/* Disable interrupts only if all AOIs are closed */
+		for (i = 0; i < NUM_AOIS; i++) {
+			struct mfb_info *mi = data->fsl_diu_info[i].par;
+
+			if (mi->count)
+				disable = false;
+		}
+		if (disable)
+			out_be32(&data->diu_reg->int_mask, 0xffffffff);
 		fsl_diu_disable_panel(info);
 	}
 
@@ -1614,14 +1621,6 @@ static int fsl_diu_probe(struct platform_device *pdev)
 	out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr);
 	out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr);
 
-	for (i = 0; i < NUM_AOIS; i++) {
-		ret = install_fb(&data->fsl_diu_info[i]);
-		if (ret) {
-			dev_err(&pdev->dev, "could not register fb %d\n", i);
-			goto error;
-		}
-	}
-
 	/*
 	 * Older versions of U-Boot leave interrupts enabled, so disable
 	 * all of them and clear the status register.
@@ -1630,12 +1629,21 @@ static int fsl_diu_probe(struct platform_device *pdev)
 	in_be32(&data->diu_reg->int_status);
 
 	ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb",
-			  &data->diu_reg);
+			  data->diu_reg);
 	if (ret) {
 		dev_err(&pdev->dev, "could not claim irq\n");
 		goto error;
 	}
 
+	for (i = 0; i < NUM_AOIS; i++) {
+		ret = install_fb(&data->fsl_diu_info[i]);
+		if (ret) {
+			dev_err(&pdev->dev, "could not register fb %d\n", i);
+			free_irq(data->irq, data->diu_reg);
+			goto error;
+		}
+	}
+
 	sysfs_attr_init(&data->dev_attr.attr);
 	data->dev_attr.attr.name = "monitor";
 	data->dev_attr.attr.mode = S_IRUGO|S_IWUSR;
@@ -1667,7 +1675,7 @@ static int fsl_diu_remove(struct platform_device *pdev)
 	data = dev_get_drvdata(&pdev->dev);
 	disable_lcdc(&data->fsl_diu_info[0]);
 
-	free_irq(data->irq, &data->diu_reg);
+	free_irq(data->irq, data->diu_reg);
 
 	for (i = 0; i < NUM_AOIS; i++)
 		uninstall_fb(&data->fsl_diu_info[i]);
diff --git a/arch/powerpc/sysdev/bestcomm/ata.h b/include/linux/fsl/bestcomm/ata.h
index 0b237181133..0b237181133 100644
--- a/arch/powerpc/sysdev/bestcomm/ata.h
+++ b/include/linux/fsl/bestcomm/ata.h
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.h b/include/linux/fsl/bestcomm/bestcomm.h
index a0e2e6b19b5..a0e2e6b19b5 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.h
+++ b/include/linux/fsl/bestcomm/bestcomm.h
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h b/include/linux/fsl/bestcomm/bestcomm_priv.h
index 3b52f3ffbdf..3b52f3ffbdf 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h
+++ b/include/linux/fsl/bestcomm/bestcomm_priv.h
diff --git a/arch/powerpc/sysdev/bestcomm/fec.h b/include/linux/fsl/bestcomm/fec.h
index ee565d94d50..ee565d94d50 100644
--- a/arch/powerpc/sysdev/bestcomm/fec.h
+++ b/include/linux/fsl/bestcomm/fec.h
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.h b/include/linux/fsl/bestcomm/gen_bd.h
index de47260e69d..de47260e69d 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.h
+++ b/include/linux/fsl/bestcomm/gen_bd.h
diff --git a/arch/powerpc/sysdev/bestcomm/sram.h b/include/linux/fsl/bestcomm/sram.h
index b6d668963cc..b6d668963cc 100644
--- a/arch/powerpc/sysdev/bestcomm/sram.h
+++ b/include/linux/fsl/bestcomm/sram.h
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index 9997c039bb2..2a847ca494b 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -14,8 +14,8 @@
 
 #include <sound/soc.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/gen_bd.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
 #include <asm/mpc52xx_psc.h>
 
 #include "mpc5200_dma.h"