diff options
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac.h | 21 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_core.c | 13 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_mal.h | 3 |
3 files changed, 29 insertions, 8 deletions
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h index 28c476f28c2..d3166da753e 100644 --- a/drivers/net/ibm_emac/ibm_emac.h +++ b/drivers/net/ibm_emac/ibm_emac.h @@ -26,7 +26,7 @@ /* This is a simple check to prevent use of this driver on non-tested SoCs */ #if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \ !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \ - !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) + !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE) #error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK" #endif @@ -246,6 +246,25 @@ struct emac_regs { #define EMAC_STACR_PCDA_SHIFT 5 #define EMAC_STACR_PRA_MASK 0x1f +/* + * For the 440SPe, AMCC inexplicably changed the polarity of + * the "operation complete" bit in the MII control register. + */ +#if defined(CONFIG_440SPE) +static inline int emac_phy_done(u32 stacr) +{ + return !(stacr & EMAC_STACR_OC); +}; +#define EMAC_STACR_START EMAC_STACR_OC + +#else /* CONFIG_440SPE */ +static inline int emac_phy_done(u32 stacr) +{ + return stacr & EMAC_STACR_OC; +}; +#define EMAC_STACR_START 0 +#endif /* !CONFIG_440SPE */ + /* EMACx_TRTR */ #if !defined(CONFIG_IBM_EMAC4) #define EMAC_TRTR_SHIFT 27 diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index 943fbd1546f..48239e17d35 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -546,7 +546,7 @@ static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg) /* Wait for management interface to become idle */ n = 10; - while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { + while (!emac_phy_done(in_be32(&p->stacr))) { udelay(1); if (!--n) goto to; @@ -556,11 +556,12 @@ static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg) out_be32(&p->stacr, EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ | (reg & EMAC_STACR_PRA_MASK) - | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT)); + | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) + | EMAC_STACR_START); /* Wait for read to complete */ n = 100; - while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) { + while (!emac_phy_done(r = in_be32(&p->stacr))) { udelay(1); if (!--n) goto to; @@ -594,7 +595,7 @@ static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg, /* Wait for management interface to be idle */ n = 10; - while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { + while (!emac_phy_done(in_be32(&p->stacr))) { udelay(1); if (!--n) goto to; @@ -605,11 +606,11 @@ static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg, EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE | (reg & EMAC_STACR_PRA_MASK) | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | - (val << EMAC_STACR_PHYD_SHIFT)); + (val << EMAC_STACR_PHYD_SHIFT) | EMAC_STACR_START); /* Wait for write to complete */ n = 100; - while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { + while (!emac_phy_done(in_be32(&p->stacr))) { udelay(1); if (!--n) goto to; diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h index 15b0bdae26a..fb6dfe1197b 100644 --- a/drivers/net/ibm_emac/ibm_emac_mal.h +++ b/drivers/net/ibm_emac/ibm_emac_mal.h @@ -34,7 +34,8 @@ #if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \ defined(CONFIG_440EP) || defined(CONFIG_NP405H) #define MAL_VERSION 1 -#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) +#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \ + defined(CONFIG_440SPE) #define MAL_VERSION 2 #else #error "Unknown SoC, please check chip manual and choose MAL 'version'" |