summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/powerpc/booting-without-of.txt261
-rw-r--r--arch/powerpc/boot/dts/walnut.dts4
-rwxr-xr-xarch/powerpc/boot/wrapper32
-rw-r--r--arch/powerpc/kernel/cputable.c36
-rw-r--r--arch/powerpc/kernel/entry_32.S23
-rw-r--r--arch/powerpc/kernel/misc_32.S32
-rw-r--r--arch/powerpc/kernel/prom.c12
-rw-r--r--arch/powerpc/mm/40x_mmu.c17
-rw-r--r--arch/powerpc/mm/44x_mmu.c1
-rw-r--r--arch/powerpc/mm/fault.c2
-rw-r--r--arch/powerpc/mm/mmu_decl.h4
-rw-r--r--arch/ppc/kernel/entry.S23
-rw-r--r--arch/ppc/kernel/misc.S31
-rw-r--r--arch/ppc/mm/44x_mmu.c1
-rw-r--r--arch/ppc/mm/4xx_mmu.c17
-rw-r--r--arch/ppc/mm/fault.c2
-rw-r--r--arch/ppc/mm/mmu_decl.h4
-rw-r--r--arch/ppc/platforms/4xx/ebony.c2
-rw-r--r--arch/ppc/platforms/4xx/luan.c7
-rw-r--r--arch/ppc/platforms/4xx/ocotea.c2
-rw-r--r--arch/ppc/platforms/4xx/taishan.c2
-rw-r--r--drivers/serial/uartlite.c10
-rw-r--r--include/asm-powerpc/pgtable-ppc32.h13
-rw-r--r--include/asm-powerpc/tlbflush.h12
24 files changed, 472 insertions, 78 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 2233e3d5e5f..ac1be25c1e2 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -52,6 +52,7 @@ Table of Contents
i) Freescale QUICC Engine module (QE)
j) CFI or JEDEC memory-mapped NOR flash
k) Global Utilities Block
+ l) Xilinx IP cores
VII - Specifying interrupt information for devices
1) interrupts property
@@ -2252,6 +2253,266 @@ platforms are moved over to use the flattened-device-tree model.
available.
For Axon: 0x0000012a
+ l) Xilinx IP cores
+
+ The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+ in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
+ of standard device types (network, serial, etc.) and miscellanious
+ devices (gpio, LCD, spi, etc). Also, since these devices are
+ implemented within the fpga fabric every instance of the device can be
+ synthesised with different options that change the behaviour.
+
+ Each IP-core has a set of parameters which the FPGA designer can use to
+ control how the core is synthesized. Historically, the EDK tool would
+ extract the device parameters relevant to device drivers and copy them
+ into an 'xparameters.h' in the form of #define symbols. This tells the
+ device drivers how the IP cores are configured, but it requres the kernel
+ to be recompiled every time the FPGA bitstream is resynthesized.
+
+ The new approach is to export the parameters into the device tree and
+ generate a new device tree each time the FPGA bitstream changes. The
+ parameters which used to be exported as #defines will now become
+ properties of the device node. In general, device nodes for IP-cores
+ will take the following form:
+
+ (name)@(base-address) {
+ compatible = "xlnx,(ip-core-name)-(HW_VER)"
+ [, (list of compatible devices), ...];
+ reg = <(baseaddr) (size)>;
+ interrupt-parent = <&interrupt-controller-phandle>;
+ interrupts = < ... >;
+ xlnx,(parameter1) = "(string-value)";
+ xlnx,(parameter2) = <(int-value)>;
+ };
+
+ (ip-core-name): the name of the ip block (given after the BEGIN
+ directive in system.mhs). Should be in lowercase
+ and all underscores '_' converted to dashes '-'.
+ (name): is derived from the "PARAMETER INSTANCE" value.
+ (parameter#): C_* parameters from system.mhs. The C_ prefix is
+ dropped from the parameter name, the name is converted
+ to lowercase and all underscore '_' characters are
+ converted to dashes '-'.
+ (baseaddr): the C_BASEADDR parameter.
+ (HW_VER): from the HW_VER parameter.
+ (size): equals C_HIGHADDR - C_BASEADDR + 1
+
+ Typically, the compatible list will include the exact IP core version
+ followed by an older IP core version which implements the same
+ interface or any other device with the same interface.
+
+ 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+ For example, the following block from system.mhs:
+
+ BEGIN opb_uartlite
+ PARAMETER INSTANCE = opb_uartlite_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BAUDRATE = 115200
+ PARAMETER C_DATA_BITS = 8
+ PARAMETER C_ODD_PARITY = 0
+ PARAMETER C_USE_PARITY = 0
+ PARAMETER C_CLK_FREQ = 50000000
+ PARAMETER C_BASEADDR = 0xEC100000
+ PARAMETER C_HIGHADDR = 0xEC10FFFF
+ BUS_INTERFACE SOPB = opb_7
+ PORT OPB_Clk = CLK_50MHz
+ PORT Interrupt = opb_uartlite_0_Interrupt
+ PORT RX = opb_uartlite_0_RX
+ PORT TX = opb_uartlite_0_TX
+ PORT OPB_Rst = sys_bus_reset_0
+ END
+
+ becomes the following device tree node:
+
+ opb-uartlite-0@ec100000 {
+ device_type = "serial";
+ compatible = "xlnx,opb-uartlite-1.00.b";
+ reg = <ec100000 10000>;
+ interrupt-parent = <&opb-intc>;
+ interrupts = <1 0>; // got this from the opb_intc parameters
+ current-speed = <d#115200>; // standard serial device prop
+ clock-frequency = <d#50000000>; // standard serial device prop
+ xlnx,data-bits = <8>;
+ xlnx,odd-parity = <0>;
+ xlnx,use-parity = <0>;
+ };
+
+ Some IP cores actually implement 2 or more logical devices. In this case,
+ the device should still describe the whole IP core with a single node
+ and add a child node for each logical device. The ranges property can
+ be used to translate from parent IP-core to the registers of each device.
+ (Note: this makes the assumption that both logical devices have the same
+ bus binding. If this is not true, then separate nodes should be used for
+ each logical device). The 'cell-index' property can be used to enumerate
+ logical devices within an IP core. For example, the following is the
+ system.mhs entry for the dual ps2 controller found on the ml403 reference
+ design.
+
+ BEGIN opb_ps2_dual_ref
+ PARAMETER INSTANCE = opb_ps2_dual_ref_0
+ PARAMETER HW_VER = 1.00.a
+ PARAMETER C_BASEADDR = 0xA9000000
+ PARAMETER C_HIGHADDR = 0xA9001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ PORT Sys_Intr1 = ps2_1_intr
+ PORT Sys_Intr2 = ps2_2_intr
+ PORT Clkin1 = ps2_clk_rx_1
+ PORT Clkin2 = ps2_clk_rx_2
+ PORT Clkpd1 = ps2_clk_tx_1
+ PORT Clkpd2 = ps2_clk_tx_2
+ PORT Rx1 = ps2_d_rx_1
+ PORT Rx2 = ps2_d_rx_2
+ PORT Txpd1 = ps2_d_tx_1
+ PORT Txpd2 = ps2_d_tx_2
+ END
+
+ It would result in the following device tree nodes:
+
+ opb_ps2_dual_ref_0@a9000000 {
+ ranges = <0 a9000000 2000>;
+ // If this device had extra parameters, then they would
+ // go here.
+ ps2@0 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <0 40>;
+ interrupt-parent = <&opb-intc>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ ps2@1000 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <1000 40>;
+ interrupt-parent = <&opb-intc>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ };
+
+ Also, the system.mhs file defines bus attachments from the processor
+ to the devices. The device tree structure should reflect the bus
+ attachments. Again an example; this system.mhs fragment:
+
+ BEGIN ppc405_virtex4
+ PARAMETER INSTANCE = ppc405_0
+ PARAMETER HW_VER = 1.01.a
+ BUS_INTERFACE DPLB = plb_v34_0
+ BUS_INTERFACE IPLB = plb_v34_0
+ END
+
+ BEGIN opb_intc
+ PARAMETER INSTANCE = opb_intc_0
+ PARAMETER HW_VER = 1.00.c
+ PARAMETER C_BASEADDR = 0xD1000FC0
+ PARAMETER C_HIGHADDR = 0xD1000FDF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN opb_uart16550
+ PARAMETER INSTANCE = opb_uart16550_0
+ PARAMETER HW_VER = 1.00.d
+ PARAMETER C_BASEADDR = 0xa0000000
+ PARAMETER C_HIGHADDR = 0xa0001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN plb_v34
+ PARAMETER INSTANCE = plb_v34_0
+ PARAMETER HW_VER = 1.02.a
+ END
+
+ BEGIN plb_bram_if_cntlr
+ PARAMETER INSTANCE = plb_bram_if_cntlr_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BASEADDR = 0xFFFF0000
+ PARAMETER C_HIGHADDR = 0xFFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ END
+
+ BEGIN plb2opb_bridge
+ PARAMETER INSTANCE = plb2opb_bridge_0
+ PARAMETER HW_VER = 1.01.a
+ PARAMETER C_RNG0_BASEADDR = 0x20000000
+ PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+ PARAMETER C_RNG1_BASEADDR = 0x60000000
+ PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+ PARAMETER C_RNG2_BASEADDR = 0x80000000
+ PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+ PARAMETER C_RNG3_BASEADDR = 0xC0000000
+ PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ BUS_INTERFACE MOPB = opb_v20_0
+ END
+
+ Gives this device tree (some properties removed for clarity):
+
+ plb-v34-0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "ibm,plb";
+ ranges; // 1:1 translation
+
+ plb-bram-if-cntrl-0@ffff0000 {
+ reg = <ffff0000 10000>;
+ }
+
+ opb-v20-0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <20000000 20000000 20000000
+ 60000000 60000000 20000000
+ 80000000 80000000 40000000
+ c0000000 c0000000 20000000>;
+
+ opb-uart16550-0@a0000000 {
+ reg = <a00000000 2000>;
+ };
+
+ opb-intc-0@d1000fc0 {
+ reg = <d1000fc0 20>;
+ };
+ };
+ };
+
+ That covers the general approach to binding xilinx IP cores into the
+ device tree. The following are bindings for specific devices:
+
+ i) Xilinx ML300 Framebuffer
+
+ Simple framebuffer device from the ML300 reference design (also on the
+ ML403 reference design as well as others).
+
+ Optional properties:
+ - resolution = <xres yres> : pixel resolution of framebuffer. Some
+ implementations use a different resolution.
+ Default is <d#640 d#480>
+ - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+ Default is <d#1024 d#480>.
+ - rotate-display (empty) : rotate display 180 degrees.
+
+ ii) Xilinx SystemACE
+
+ The Xilinx SystemACE device is used to program FPGAs from an FPGA
+ bitstream stored on a CF card. It can also be used as a generic CF
+ interface device.
+
+ Optional properties:
+ - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+ iii) Xilinx EMAC and Xilinx TEMAC
+
+ Xilinx Ethernet devices. In addition to general xilinx properties
+ listed above, nodes for these devices should include a phy-handle
+ property, and may include other common network device properties
+ like local-mac-address.
+
+ iv) Xilinx Uartlite
+
+ Xilinx uartlite devices are simple fixed speed serial ports.
+
+ Requred properties:
+ - current-speed : Baud rate of uartlite
+
More devices will be defined as this spec matures.
VII - Specifying interrupt information for devices
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index fa681f5343f..754fa3960f8 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -122,7 +122,9 @@
device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
- interrupts = <9 4 f 4>;
+ interrupts = <
+ f 4 /* Ethernet */
+ 9 4 /* Ethernet Wake Up */>;
local-mac-address = [000000000000]; /* Filled in by zImage */
reg = <ef600800 70>;
mal-device = <&MAL>;
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index ece6f49638d..31147a03772 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -21,6 +21,14 @@
# (default ./arch/powerpc/boot)
# -W dir specify working directory for temporary files (default .)
+# Stop execution if any command fails
+set -e
+
+# Allow for verbose output
+if [ "$V" = 1 ]; then
+ set -x
+fi
+
# defaults
kernel=
ofile=zImage
@@ -111,7 +119,7 @@ if [ -n "$dts" ]; then
if [ -z "$dtb" ]; then
dtb="$platform.dtb"
fi
- dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1
+ dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts"
fi
if [ -z "$kernel" ]; then
@@ -283,23 +291,13 @@ ps3)
${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
- msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
- skip=$overlay_dest seek=$system_reset_kernel \
- count=$overlay_size bs=1 2>&1)
+ dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
+ skip=$overlay_dest seek=$system_reset_kernel \
+ count=$overlay_size bs=1
- if [ $? -ne "0" ]; then
- echo $msg
- exit 1
- fi
-
- msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
- skip=$system_reset_overlay seek=$overlay_dest \
- count=$overlay_size bs=1 2>&1)
-
- if [ $? -ne "0" ]; then
- echo $msg
- exit 2
- fi
+ dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
+ skip=$system_reset_overlay seek=$overlay_dest \
+ count=$overlay_size bs=1
gzip --force -9 --stdout "$ofile.bin" > "$object/otheros.bld"
;;
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index d3fb7d0c6c1..9ed351f3c96 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1104,6 +1104,16 @@ static struct cpu_spec __initdata cpu_specs[] = {
{
.pvr_mask = 0xf0000fff,
.pvr_value = 0x40000850,
+ .cpu_name = "440GR Rev. A",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .platform = "ppc440",
+ },
+ { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */
+ .pvr_mask = 0xf0000fff,
+ .pvr_value = 0x40000858,
.cpu_name = "440EP Rev. A",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
@@ -1115,28 +1125,27 @@ static struct cpu_spec __initdata cpu_specs[] = {
{
.pvr_mask = 0xf0000fff,
.pvr_value = 0x400008d3,
- .cpu_name = "440EP Rev. B",
+ .cpu_name = "440GR Rev. B",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.icache_bsize = 32,
.dcache_bsize = 32,
- .cpu_setup = __setup_cpu_440ep,
.platform = "ppc440",
},
- { /* 440EPX */
- .pvr_mask = 0xf0000ffb,
- .pvr_value = 0x200008D0,
- .cpu_name = "440EPX",
+ { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */
+ .pvr_mask = 0xf0000fff,
+ .pvr_value = 0x400008db,
+ .cpu_name = "440EP Rev. B",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.icache_bsize = 32,
.dcache_bsize = 32,
- .cpu_setup = __setup_cpu_440epx,
+ .cpu_setup = __setup_cpu_440ep,
.platform = "ppc440",
},
{ /* 440GRX */
.pvr_mask = 0xf0000ffb,
- .pvr_value = 0x200008D8,
+ .pvr_value = 0x200008D0,
.cpu_name = "440GRX",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
@@ -1145,6 +1154,17 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_setup = __setup_cpu_440grx,
.platform = "ppc440",
},
+ { /* Use logical PVR for 440EPx (logical pvr = pvr | 0x8) */
+ .pvr_mask = 0xf0000ffb,
+ .pvr_value = 0x200008D8,
+ .cpu_name = "440EPX",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_440epx,
+ .platform = "ppc440",
+ },
{ /* 440GP Rev. B */
.pvr_mask = 0xf0000fff,
.pvr_value = 0x40000440,
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 21d889e63e8..a7572cf464b 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -244,6 +244,13 @@ syscall_exit_cont:
andis. r10,r0,DBCR0_IC@h
bnel- load_dbcr0
#endif
+#ifdef CONFIG_44x
+ lis r4,icache_44x_need_flush@ha
+ lwz r5,icache_44x_need_flush@l(r4)
+ cmplwi cr0,r5,0
+ bne- 2f
+1:
+#endif /* CONFIG_44x */
stwcx. r0,0,r1 /* to clear the reservation */
lwz r4,_LINK(r1)
lwz r5,_CCR(r1)
@@ -258,6 +265,12 @@ syscall_exit_cont:
mtspr SPRN_SRR1,r8
SYNC
RFI
+#ifdef CONFIG_44x
+2: li r7,0
+ iccci r0,r0
+ stw r7,icache_44x_need_flush@l(r4)
+ b 1b
+#endif /* CONFIG_44x */
66: li r3,-ENOSYS
b ret_from_syscall
@@ -683,6 +696,16 @@ resume_kernel:
/* interrupts are hard-disabled at this point */
restore:
+#ifdef CONFIG_44x
+ lis r4,icache_44x_need_flush@ha
+ lwz r5,icache_44x_need_flush@l(r4)
+ cmplwi cr0,r5,0
+ beq+ 1f
+ li r6,0
+ iccci r0,r0
+ stw r6,icache_44x_need_flush@l(r4)
+1:
+#endif /* CONFIG_44x */
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 8533de50347..8b642ab26d3 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -288,7 +288,16 @@ _GLOBAL(_tlbia)
*/
_GLOBAL(_tlbie)
#if defined(CONFIG_40x)
+ /* We run the search with interrupts disabled because we have to change
+ * the PID and I don't want to preempt when that happens.
+ */
+ mfmsr r5
+ mfspr r6,SPRN_PID
+ wrteei 0
+ mtspr SPRN_PID,r4
tlbsx. r3, 0, r3
+ mtspr SPRN_PID,r6
+ wrtee r5
bne 10f
sync
/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
@@ -297,23 +306,23 @@ _GLOBAL(_tlbie)
tlbwe r3, r3, TLB_TAG
isync
10:
+
#elif defined(CONFIG_44x)
- mfspr r4,SPRN_MMUCR
- mfspr r5,SPRN_PID /* Get PID */
- rlwimi r4,r5,0,24,31 /* Set TID */
+ mfspr r5,SPRN_MMUCR
+ rlwimi r5,r4,0,24,31 /* Set TID */
/* We have to run the search with interrupts disabled, even critical
* and debug interrupts (in fact the only critical exceptions we have
* are debug and machine check). Otherwise an interrupt which causes
* a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
- mfmsr r5
+ mfmsr r4
lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
- andc r6,r5,r6
+ andc r6,r4,r6
mtmsr r6
- mtspr SPRN_MMUCR,r4
+ mtspr SPRN_MMUCR,r5
tlbsx. r3, 0, r3
- mtmsr r5
+ mtmsr r4
bne 10f
sync
/* There are only 64 TLB entries, so r3 < 64,
@@ -534,12 +543,21 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
addi r3,r3,L1_CACHE_BYTES
bdnz 0b
sync
+#ifndef CONFIG_44x
+ /* We don't flush the icache on 44x. Those have a virtual icache
+ * and we don't have access to the virtual address here (it's
+ * not the page vaddr but where it's mapped in user space). The
+ * flushing of the icache on these is handled elsewhere, when
+ * a change in the address space occurs, before returning to
+ * user space
+ */
mtctr r4
1: icbi 0,r6
addi r6,r6,L1_CACHE_BYTES
bdnz 1b
sync
isync
+#endif /* CONFIG_44x */
blr
/*
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 9f329a8928e..acc0d247d3c 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -697,6 +697,18 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
if (prop && (*prop & 0xff000000) == 0x0f000000)
identify_cpu(0, *prop);
+#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
+ /*
+ * Since 440GR(x)/440EP(x) processors have the same pvr,
+ * we check the node path and set bit 28 in the cur_cpu_spec
+ * pvr for EP(x) processor version. This bit is always 0 in
+ * the "real" pvr. Then we call identify_cpu again with
+ * the new logical pvr to enable FPU support.
+ */
+ if (strstr(uname, "440EP")) {
+ identify_cpu(0, cur_cpu_spec->pvr_value | 0x8);
+ }
+#endif
}
check_cpu_feature_properties(node);
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index e067df836be..3899ea97fbd 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -98,13 +98,12 @@ unsigned long __init mmu_mapin_ram(void)
v = KERNELBASE;
p = PPC_MEMSTART;
- s = 0;
+ s = total_lowmem;
- if (__map_without_ltlbs) {
- return s;
- }
+ if (__map_without_ltlbs)
+ return 0;
- while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+ while (s >= LARGE_PAGE_SIZE_16M) {
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
@@ -116,10 +115,10 @@ unsigned long __init mmu_mapin_ram(void)
v += LARGE_PAGE_SIZE_16M;
p += LARGE_PAGE_SIZE_16M;
- s += LARGE_PAGE_SIZE_16M;
+ s -= LARGE_PAGE_SIZE_16M;
}
- while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+ while (s >= LARGE_PAGE_SIZE_4M) {
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
@@ -128,8 +127,8 @@ unsigned long __init mmu_mapin_ram(void)
v += LARGE_PAGE_SIZE_4M;
p += LARGE_PAGE_SIZE_4M;
- s += LARGE_PAGE_SIZE_4M;
+ s -= LARGE_PAGE_SIZE_4M;
}
- return s;
+ return total_lowmem - s;
}
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index c3df5047653..04dc08798d3 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -35,6 +35,7 @@
*/
unsigned int tlb_44x_index; /* = 0 */
unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
+int icache_44x_need_flush;
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index a18fda361cc..8135da06e0a 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -309,7 +309,7 @@ good_area:
set_bit(PG_arch_1, &page->flags);
}
pte_update(ptep, 0, _PAGE_HWEXEC);
- _tlbie(address);
+ _tlbie(address, mm->context.id);
pte_unmap_unlock(ptep, ptl);
up_read(&mm->mmap_sem);
return 0;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index c94a64fd3c0..eb3a732e91d 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -61,12 +61,12 @@ extern unsigned long total_lowmem;
#define mmu_mapin_ram() (0UL)
#elif defined(CONFIG_4xx)
-#define flush_HPTE(X, va, pg) _tlbie(va)
+#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
#elif defined(CONFIG_FSL_BOOKE)
-#define flush_HPTE(X, va, pg) _tlbie(va)
+#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
extern void adjust_total_lowmem(void);
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index fba7ca17a67..b19bfef2034 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -244,6 +244,13 @@ syscall_exit_cont:
andis. r10,r0,DBCR0_IC@h
bnel- load_dbcr0
#endif
+#ifdef CONFIG_44x
+ lis r4,icache_44x_need_flush@ha
+ lwz r5,icache_44x_need_flush@l(r4)
+ cmplwi cr0,r5,0
+ bne- 2f
+1:
+#endif /* CONFIG_44x */
stwcx. r0,0,r1 /* to clear the reservation */
lwz r4,_LINK(r1)
lwz r5,_CCR(r1)
@@ -258,6 +265,12 @@ syscall_exit_cont:
mtspr SPRN_SRR1,r8
SYNC
RFI
+#ifdef CONFIG_44x
+2: li r7,0
+ iccci r0,r0
+ stw r7,icache_44x_need_flush@l(r4)
+ b 1b
+#endif /* CONFIG_44x */
66: li r3,-ENOSYS
b ret_from_syscall
@@ -679,6 +692,16 @@ resume_kernel:
/* interrupts are hard-disabled at this point */
restore:
+#ifdef CONFIG_44x
+ lis r4,icache_44x_need_flush@ha
+ lwz r5,icache_44x_need_flush@l(r4)
+ cmplwi cr0,r5,0
+ beq+ 1f
+ li r6,0
+ iccci r0,r0
+ stw r6,icache_44x_need_flush@l(r4)
+1:
+#endif /* CONFIG_44x */
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index a22e1f4d94c..e0c850d85c5 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -224,7 +224,16 @@ _GLOBAL(_tlbia)
*/
_GLOBAL(_tlbie)
#if defined(CONFIG_40x)
+ /* We run the search with interrupts disabled because we have to change
+ * the PID and I don't want to preempt when that happens.
+ */
+ mfmsr r5
+ mfspr r6,SPRN_PID
+ wrteei 0
+ mtspr SPRN_PID,r4
tlbsx. r3, 0, r3
+ mtspr SPRN_PID,r6
+ wrtee r5
bne 10f
sync
/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
@@ -234,22 +243,21 @@ _GLOBAL(_tlbie)
isync
10:
#elif defined(CONFIG_44x)
- mfspr r4,SPRN_MMUCR
- mfspr r5,SPRN_PID /* Get PID */
- rlwimi r4,r5,0,24,31 /* Set TID */
+ mfspr r5,SPRN_MMUCR
+ rlwimi r5,r4,0,24,31 /* Set TID */
/* We have to run the search with interrupts disabled, even critical
* and debug interrupts (in fact the only critical exceptions we have
* are debug and machine check). Otherwise an interrupt which causes
* a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
- mfmsr r5
+ mfmsr r4
lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
- andc r6,r5,r6
+ andc r6,r4,r6
mtmsr r6
- mtspr SPRN_MMUCR,r4
+ mtspr SPRN_MMUCR,r5
tlbsx. r3, 0, r3
- mtmsr r5
+ mtmsr r4
bne 10f
sync
/* There are only 64 TLB entries, so r3 < 64,
@@ -491,12 +499,21 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
addi r3,r3,L1_CACHE_BYTES
bdnz 0b
sync
+#ifndef CONFIG_44x
+ /* We don't flush the icache on 44x. Those have a virtual icache
+ * and we don't have access to the virtual address here (it's
+ * not the page vaddr but where it's mapped in user space). The
+ * flushing of the icache on these is handled elsewhere, when
+ * a change in the address space occurs, before returning to
+ * user space
+ */
mtctr r4
1: icbi 0,r6
addi r6,r6,L1_CACHE_BYTES
bdnz 1b
sync
isync
+#endif /* CONFIG_44x */
blr
/*
diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c
index 0a0a0487b33..6536a25cfcb 100644
--- a/arch/ppc/mm/44x_mmu.c
+++ b/arch/ppc/mm/44x_mmu.c
@@ -61,6 +61,7 @@ extern char etext[], _stext[];
*/
unsigned int tlb_44x_index = 0;
unsigned int tlb_44x_hwater = 62;
+int icache_44x_need_flush;
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem
diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c
index 838e09db71d..ea785dbaac7 100644
--- a/arch/ppc/mm/4xx_mmu.c
+++ b/arch/ppc/mm/4xx_mmu.c
@@ -99,13 +99,12 @@ unsigned long __init mmu_mapin_ram(void)
v = KERNELBASE;
p = PPC_MEMSTART;
- s = 0;
+ s = total_lowmem;
- if (__map_without_ltlbs) {
- return s;
- }
+ if (__map_without_ltlbs)
+ return 0;
- while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+ while (s >= LARGE_PAGE_SIZE_16M) {
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
@@ -117,10 +116,10 @@ unsigned long __init mmu_mapin_ram(void)
v += LARGE_PAGE_SIZE_16M;
p += LARGE_PAGE_SIZE_16M;
- s += LARGE_PAGE_SIZE_16M;
+ s -= LARGE_PAGE_SIZE_16M;
}
- while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+ while (s >= LARGE_PAGE_SIZE_4M) {
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
@@ -129,8 +128,8 @@ unsigned long __init mmu_mapin_ram(void)
v += LARGE_PAGE_SIZE_4M;
p += LARGE_PAGE_SIZE_4M;
- s += LARGE_PAGE_SIZE_4M;
+ s -= LARGE_PAGE_SIZE_4M;
}
- return s;
+ return total_lowmem - s;
}
diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c
index 254c23b755e..36c0e7529ed 100644
--- a/arch/ppc/mm/fault.c
+++ b/arch/ppc/mm/fault.c
@@ -227,7 +227,7 @@ good_area:
set_bit(PG_arch_1, &page->flags);
}
pte_update(ptep, 0, _PAGE_HWEXEC);
- _tlbie(address);
+ _tlbie(address, mm->context.id);
pte_unmap_unlock(ptep, ptl);
up_read(&mm->mmap_sem);
return 0;
diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h
index 540f3292b22..f1d4f2109a9 100644
--- a/arch/ppc/mm/mmu_decl.h
+++ b/arch/ppc/mm/mmu_decl.h
@@ -54,12 +54,12 @@ extern unsigned int num_tlbcam_entries;
#define mmu_mapin_ram() (0UL)
#elif defined(CONFIG_4xx)
-#define flush_HPTE(X, va, pg) _tlbie(va)
+#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
#elif defined(CONFIG_FSL_BOOKE)
-#define flush_HPTE(X, va, pg) _tlbie(va)
+#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
extern void adjust_total_lowmem(void);
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
index 05d7184d7e1..453643a0eee 100644
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -236,7 +236,7 @@ ebony_early_serial_map(void)
gen550_init(0, &port);
/* Purge TLB entry added in head_44x.S for early serial access */
- _tlbie(UART0_IO_BASE);
+ _tlbie(UART0_IO_BASE, 0);
#endif
port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
index 4b169610f15..b79ebb8a3e6 100644
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -230,9 +230,14 @@ luan_setup_hoses(void)
/* Allocate hoses for PCIX1 and PCIX2 */
hose1 = pcibios_alloc_controller();
+ if (!hose1)
+ return;
+
hose2 = pcibios_alloc_controller();
- if (!hose1 || !hose2)
+ if (!hose2) {
+ pcibios_free_controller(hose1);
return;
+ }
/* Setup PCIX1 */
hose1->first_busno = 0;
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index fd0f971881d..28a712cd480 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -259,7 +259,7 @@ ocotea_early_serial_map(void)
gen550_init(0, &port);
/* Purge TLB entry added in head_44x.S for early serial access */
- _tlbie(UART0_IO_BASE);
+ _tlbie(UART0_IO_BASE, 0);
#endif
port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
index 888c492b4a4..f6a0c6650f3 100644
--- a/arch/ppc/platforms/4xx/taishan.c
+++ b/arch/ppc/platforms/4xx/taishan.c
@@ -316,7 +316,7 @@ taishan_early_serial_map(void)
gen550_init(0, &port);
/* Purge TLB entry added in head_44x.S for early serial access */
- _tlbie(UART0_IO_BASE);
+ _tlbie(UART0_IO_BASE, 0);
#endif
port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index dfef83f1496..a85f2d31a68 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -329,12 +329,14 @@ static struct uart_ops ulite_ops = {
static void ulite_console_wait_tx(struct uart_port *port)
{
int i;
+ u8 val;
- /* wait up to 10ms for the character(s) to be sent */
- for (i = 0; i < 10000; i++) {
- if (readb(port->membase + ULITE_STATUS) & ULITE_STATUS_TXEMPTY)
+ /* Spin waiting for TX fifo to have space available */
+ for (i = 0; i < 100000; i++) {
+ val = readb(port->membase + ULITE_STATUS);
+ if ((val & ULITE_STATUS_TXFULL) == 0)
break;
- udelay(1);
+ cpu_relax();
}
}
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index 86a54a4a8a2..fea2d8ff1e7 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -11,6 +11,11 @@
extern unsigned long va_to_phys(unsigned long address);
extern pte_t *va_to_pte(unsigned long address);
extern unsigned long ioremap_bot, ioremap_base;
+
+#ifdef CONFIG_44x
+extern int icache_44x_need_flush;
+#endif
+
#endif /* __ASSEMBLY__ */
/*
@@ -562,6 +567,10 @@ static inline unsigned long pte_update(pte_t *p, unsigned long clr,
: "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" (clr), "r" (set), "m" (*p)
: "cc" );
+#ifdef CONFIG_44x
+ if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+ icache_44x_need_flush = 1;
+#endif
return old;
}
#else
@@ -582,6 +591,10 @@ static inline unsigned long long pte_update(pte_t *p, unsigned long clr,
: "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
: "cc" );
+#ifdef CONFIG_44x
+ if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+ icache_44x_need_flush = 1;
+#endif
return old;
}
#endif
diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h
index b6b036ccee3..e7b4c0d298a 100644
--- a/include/asm-powerpc/tlbflush.h
+++ b/include/asm-powerpc/tlbflush.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_TLBFLUSH_H
#define _ASM_POWERPC_TLBFLUSH_H
+
/*
* TLB flushing:
*
@@ -16,9 +17,6 @@
*/
#ifdef __KERNEL__
-struct mm_struct;
-struct vm_area_struct;
-
#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
/*
* TLB flushing for software loaded TLB chips
@@ -28,7 +26,9 @@ struct vm_area_struct;
* specific tlbie's
*/
-extern void _tlbie(unsigned long address);
+#include <linux/mm.h>
+
+extern void _tlbie(unsigned long address, unsigned int pid);
#if defined(CONFIG_40x) || defined(CONFIG_8xx)
#define _tlbia() asm volatile ("tlbia; sync" : : : "memory")
@@ -44,13 +44,13 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
{
- _tlbie(vmaddr);
+ _tlbie(vmaddr, vma->vm_mm->context.id);
}
static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
unsigned long vmaddr)
{
- _tlbie(vmaddr);
+ _tlbie(vmaddr, vma->vm_mm->context.id);
}
static inline void flush_tlb_range(struct vm_area_struct *vma,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 11:57:42 +0000