diff options
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 4 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 14 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 171 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_regs.h | 3 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 19 |
5 files changed, 206 insertions, 5 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index 6827ce338f6..745a1f53361 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -726,6 +726,10 @@ int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, int t4_fw_bye(struct adapter *adap, unsigned int mbox); int t4_early_init(struct adapter *adap, unsigned int mbox); int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset); +int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force); +int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset); +int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, + const u8 *fw_data, unsigned int size, int force); int t4_fw_config_file(struct adapter *adap, unsigned int mbox, unsigned int mtype, unsigned int maddr, u32 *finiver, u32 *finicsum, u32 *cfcsum); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index a3f866d5b8f..94b78461031 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -929,10 +929,18 @@ static int upgrade_fw(struct adapter *adap) */ if (FW_HDR_FW_VER_MAJOR_GET(adap->params.fw_vers) != FW_VERSION_MAJOR || vers > adap->params.fw_vers) { - ret = -t4_load_fw(adap, fw->data, fw->size); + dev_info(dev, "upgrading firmware ...\n"); + ret = t4_fw_upgrade(adap, adap->mbox, fw->data, fw->size, + /*force=*/false); if (!ret) - dev_info(dev, "firmware upgraded to version %pI4 from " - FW_FNAME "\n", &hdr->fw_ver); + dev_info(dev, "firmware successfully upgraded to " + FW_FNAME " (%d.%d.%d.%d)\n", + FW_HDR_FW_VER_MAJOR_GET(vers), + FW_HDR_FW_VER_MINOR_GET(vers), + FW_HDR_FW_VER_MICRO_GET(vers), + FW_HDR_FW_VER_BUILD_GET(vers)); + else + dev_err(dev, "firmware upgrade failed! err=%d\n", -ret); } else { /* * Tell our caller that we didn't upgrade the firmware. diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 61f002d2201..ab732b378c4 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -2537,6 +2537,177 @@ int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) } /** + * t4_fw_halt - issue a reset/halt to FW and put uP into RESET + * @adap: the adapter + * @mbox: mailbox to use for the FW RESET command (if desired) + * @force: force uP into RESET even if FW RESET command fails + * + * Issues a RESET command to firmware (if desired) with a HALT indication + * and then puts the microprocessor into RESET state. The RESET command + * will only be issued if a legitimate mailbox is provided (mbox <= + * FW_PCIE_FW_MASTER_MASK). + * + * This is generally used in order for the host to safely manipulate the + * adapter without fear of conflicting with whatever the firmware might + * be doing. The only way out of this state is to RESTART the firmware + * ... + */ +int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force) +{ + int ret = 0; + + /* + * If a legitimate mailbox is provided, issue a RESET command + * with a HALT indication. + */ + if (mbox <= FW_PCIE_FW_MASTER_MASK) { + struct fw_reset_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, RESET, WRITE); + c.val = htonl(PIORST | PIORSTMODE); + c.halt_pkd = htonl(FW_RESET_CMD_HALT(1U)); + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + } + + /* + * Normally we won't complete the operation if the firmware RESET + * command fails but if our caller insists we'll go ahead and put the + * uP into RESET. This can be useful if the firmware is hung or even + * missing ... We'll have to take the risk of putting the uP into + * RESET without the cooperation of firmware in that case. + * + * We also force the firmware's HALT flag to be on in case we bypassed + * the firmware RESET command above or we're dealing with old firmware + * which doesn't have the HALT capability. This will serve as a flag + * for the incoming firmware to know that it's coming out of a HALT + * rather than a RESET ... if it's new enough to understand that ... + */ + if (ret == 0 || force) { + t4_set_reg_field(adap, CIM_BOOT_CFG, UPCRST, UPCRST); + t4_set_reg_field(adap, PCIE_FW, FW_PCIE_FW_HALT, + FW_PCIE_FW_HALT); + } + + /* + * And we always return the result of the firmware RESET command + * even when we force the uP into RESET ... + */ + return ret; +} + +/** + * t4_fw_restart - restart the firmware by taking the uP out of RESET + * @adap: the adapter + * @reset: if we want to do a RESET to restart things + * + * Restart firmware previously halted by t4_fw_halt(). On successful + * return the previous PF Master remains as the new PF Master and there + * is no need to issue a new HELLO command, etc. + * + * We do this in two ways: + * + * 1. If we're dealing with newer firmware we'll simply want to take + * the chip's microprocessor out of RESET. This will cause the + * firmware to start up from its start vector. And then we'll loop + * until the firmware indicates it's started again (PCIE_FW.HALT + * reset to 0) or we timeout. + * + * 2. If we're dealing with older firmware then we'll need to RESET + * the chip since older firmware won't recognize the PCIE_FW.HALT + * flag and automatically RESET itself on startup. + */ +int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset) +{ + if (reset) { + /* + * Since we're directing the RESET instead of the firmware + * doing it automatically, we need to clear the PCIE_FW.HALT + * bit. + */ + t4_set_reg_field(adap, PCIE_FW, FW_PCIE_FW_HALT, 0); + + /* + * If we've been given a valid mailbox, first try to get the + * firmware to do the RESET. If that works, great and we can + * return success. Otherwise, if we haven't been given a + * valid mailbox or the RESET command failed, fall back to + * hitting the chip with a hammer. + */ + if (mbox <= FW_PCIE_FW_MASTER_MASK) { + t4_set_reg_field(adap, CIM_BOOT_CFG, UPCRST, 0); + msleep(100); + if (t4_fw_reset(adap, mbox, + PIORST | PIORSTMODE) == 0) + return 0; + } + + t4_write_reg(adap, PL_RST, PIORST | PIORSTMODE); + msleep(2000); + } else { + int ms; + + t4_set_reg_field(adap, CIM_BOOT_CFG, UPCRST, 0); + for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { + if (!(t4_read_reg(adap, PCIE_FW) & FW_PCIE_FW_HALT)) + return 0; + msleep(100); + ms += 100; + } + return -ETIMEDOUT; + } + return 0; +} + +/** + * t4_fw_upgrade - perform all of the steps necessary to upgrade FW + * @adap: the adapter + * @mbox: mailbox to use for the FW RESET command (if desired) + * @fw_data: the firmware image to write + * @size: image size + * @force: force upgrade even if firmware doesn't cooperate + * + * Perform all of the steps necessary for upgrading an adapter's + * firmware image. Normally this requires the cooperation of the + * existing firmware in order to halt all existing activities + * but if an invalid mailbox token is passed in we skip that step + * (though we'll still put the adapter microprocessor into RESET in + * that case). + * + * On successful return the new firmware will have been loaded and + * the adapter will have been fully RESET losing all previous setup + * state. On unsuccessful return the adapter may be completely hosed ... + * positive errno indicates that the adapter is ~probably~ intact, a + * negative errno indicates that things are looking bad ... + */ +int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, + const u8 *fw_data, unsigned int size, int force) +{ + const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; + int reset, ret; + + ret = t4_fw_halt(adap, mbox, force); + if (ret < 0 && !force) + return ret; + + ret = t4_load_fw(adap, fw_data, size); + if (ret < 0) + return ret; + + /* + * Older versions of the firmware don't understand the new + * PCIE_FW.HALT flag and so won't know to perform a RESET when they + * restart. So for newly loaded older firmware we'll have to do the + * RESET for it so it starts up on a clean slate. We can tell if + * the newly loaded firmware will handle this right by checking + * its header flags to see if it advertises the capability. + */ + reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); + return t4_fw_restart(adap, mbox, reset); +} + + +/** * t4_fw_config_file - setup an adapter via a Configuration File * @adap: the adapter * @mbox: mailbox to use for the FW command diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h index 732c6da2636..a1a8b57200f 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h @@ -321,6 +321,8 @@ #define WINDOW(x) ((x) << WINDOW_SHIFT) #define PCIE_MEM_ACCESS_OFFSET 0x306c +#define PCIE_FW 0x30b8 + #define PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS 0x5908 #define RNPP 0x80000000U #define RPCP 0x20000000U @@ -419,6 +421,7 @@ #define CIM_BOOT_CFG 0x7b00 #define BOOTADDR_MASK 0xffffff00U +#define UPCRST 0x1U #define CIM_PF_MAILBOX_DATA 0x240 #define CIM_PF_MAILBOX_CTRL 0x280 diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index b1d556128f8..a6364632b49 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -317,9 +317,15 @@ struct fw_reset_cmd { __be32 op_to_write; __be32 retval_len16; __be32 val; - __be32 r3; + __be32 halt_pkd; }; +#define FW_RESET_CMD_HALT_SHIFT 31 +#define FW_RESET_CMD_HALT_MASK 0x1 +#define FW_RESET_CMD_HALT(x) ((x) << FW_RESET_CMD_HALT_SHIFT) +#define FW_RESET_CMD_HALT_GET(x) \ + (((x) >> FW_RESET_CMD_HALT_SHIFT) & FW_RESET_CMD_HALT_MASK) + enum fw_hellow_cmd { fw_hello_cmd_stage_os = 0x0 }; @@ -1648,6 +1654,7 @@ struct fw_debug_cmd { #define FW_PCIE_FW_ERR (1U << 31) #define FW_PCIE_FW_INIT (1U << 30) +#define FW_PCIE_FW_HALT (1U << 29) #define FW_PCIE_FW_MASTER_VLD (1U << 15) #define FW_PCIE_FW_MASTER_MASK 0x7 #define FW_PCIE_FW_MASTER_SHIFT 12 @@ -1669,7 +1676,11 @@ struct fw_hdr { u8 intfver_iscsi; u8 intfver_fcoe; u8 reserved2; - __be32 reserved3[27]; + __u32 reserved3; + __u32 reserved4; + __u32 reserved5; + __be32 flags; + __be32 reserved6[23]; }; #define FW_HDR_FW_VER_MAJOR_GET(x) (((x) >> 24) & 0xff) @@ -1677,4 +1688,8 @@ struct fw_hdr { #define FW_HDR_FW_VER_MICRO_GET(x) (((x) >> 8) & 0xff) #define FW_HDR_FW_VER_BUILD_GET(x) (((x) >> 0) & 0xff) +enum fw_hdr_flags { + FW_HDR_FLAGS_RESET_HALT = 0x00000001, +}; + #endif /* _T4FW_INTERFACE_H_ */ |