diff options
| -rw-r--r-- | MAINTAINERS | 2 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 46 | ||||
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/adi/Kconfig | 68 | ||||
| -rw-r--r-- | drivers/net/ethernet/adi/Makefile | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/adi/bfin_mac.c (renamed from drivers/net/bfin_mac.c) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/adi/bfin_mac.h (renamed from drivers/net/bfin_mac.h) | 0 |
9 files changed, 76 insertions, 48 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 879c17ebf38..15d70213be5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1446,7 +1446,7 @@ BLACKFIN EMAC DRIVER L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported -F: drivers/net/bfin_mac.* +F: drivers/net/ethernet/adi/ BLACKFIN RTC DRIVER M: Mike Frysinger <vapier.adi@gmail.com> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index fd333803be8..10c25b5bb2f 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -252,52 +252,6 @@ config SH_ETH This driver supporting CPUs are: - SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757. -config BFIN_MAC - tristate "Blackfin on-chip MAC support" - depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537) - select CRC32 - select MII - select PHYLIB - select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE - help - This is the driver for Blackfin on-chip mac device. Say Y if you want it - compiled into the kernel. This driver is also available as a module - ( = code which can be inserted in and removed from the running kernel - whenever you want). The module will be called bfin_mac. - -config BFIN_MAC_USE_L1 - bool "Use L1 memory for rx/tx packets" - depends on BFIN_MAC && (BF527 || BF537) - default y - help - To get maximum network performance, you should use L1 memory as rx/tx buffers. - Say N here if you want to reserve L1 memory for other uses. - -config BFIN_TX_DESC_NUM - int "Number of transmit buffer packets" - depends on BFIN_MAC - range 6 10 if BFIN_MAC_USE_L1 - range 10 100 - default "10" - help - Set the number of buffer packets used in driver. - -config BFIN_RX_DESC_NUM - int "Number of receive buffer packets" - depends on BFIN_MAC - range 20 100 if BFIN_MAC_USE_L1 - range 20 800 - default "20" - help - Set the number of buffer packets used in driver. - -config BFIN_MAC_USE_HWSTAMP - bool "Use IEEE 1588 hwstamp" - depends on BFIN_MAC && BF518 - default y - help - To support the IEEE 1588 Precision Time Protocol (PTP), select y here - config NET_NETX tristate "NetX Ethernet support" select MII diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 8e6dbd74120..d249d76ce2f 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -57,7 +57,6 @@ obj-$(CONFIG_EQUALIZER) += eql.o obj-$(CONFIG_TUN) += tun.o obj-$(CONFIG_VETH) += veth.o obj-$(CONFIG_NET_NETX) += netx-eth.o -obj-$(CONFIG_BFIN_MAC) += bfin_mac.o obj-$(CONFIG_DM9000) += dm9000.o obj-$(CONFIG_ENC28J60) += enc28j60.o obj-$(CONFIG_ETHOC) += ethoc.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 6b3b3dc172e..e087337f92b 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -15,6 +15,7 @@ source "drivers/net/ethernet/3com/Kconfig" source "drivers/net/ethernet/amd/Kconfig" source "drivers/net/ethernet/apple/Kconfig" source "drivers/net/ethernet/atheros/Kconfig" +source "drivers/net/ethernet/adi/Kconfig" source "drivers/net/ethernet/broadcom/Kconfig" source "drivers/net/ethernet/brocade/Kconfig" source "drivers/net/ethernet/chelsio/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 2a1cbce0278..826db27564a 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_NET_VENDOR_8390) += 8390/ obj-$(CONFIG_NET_VENDOR_AMD) += amd/ obj-$(CONFIG_NET_VENDOR_APPLE) += apple/ obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/ +obj-$(CONFIG_NET_BFIN) += adi/ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/ obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig new file mode 100644 index 00000000000..6de9851045c --- /dev/null +++ b/drivers/net/ethernet/adi/Kconfig @@ -0,0 +1,68 @@ +# +# Blackfin device configuration +# + +config NET_BFIN + bool "Blackfin devices" + depends on BF516 || BF518 || BF526 || BF527 || BF536 || BF537 + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y. + Make sure you know the name of your card. Read the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + If unsure, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the remaining Blackfin card questions. If you say Y, you will be + asked for your specific card in the following questions. + +if NET_BFIN + +config BFIN_MAC + tristate "Blackfin on-chip MAC support" + depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537) + select CRC32 + select MII + select PHYLIB + select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE + ---help--- + This is the driver for Blackfin on-chip mac device. Say Y if you want + it compiled into the kernel. This driver is also available as a + module ( = code which can be inserted in and removed from the running + kernel whenever you want). The module will be called bfin_mac. + +config BFIN_MAC_USE_L1 + bool "Use L1 memory for rx/tx packets" + depends on BFIN_MAC && (BF527 || BF537) + default y + ---help--- + To get maximum network performance, you should use L1 memory as rx/tx + buffers. Say N here if you want to reserve L1 memory for other uses. + +config BFIN_TX_DESC_NUM + int "Number of transmit buffer packets" + depends on BFIN_MAC + range 6 10 if BFIN_MAC_USE_L1 + range 10 100 + default "10" + ---help--- + Set the number of buffer packets used in driver. + +config BFIN_RX_DESC_NUM + int "Number of receive buffer packets" + depends on BFIN_MAC + range 20 100 if BFIN_MAC_USE_L1 + range 20 800 + default "20" + ---help--- + Set the number of buffer packets used in driver. + +config BFIN_MAC_USE_HWSTAMP + bool "Use IEEE 1588 hwstamp" + depends on BFIN_MAC && BF518 + default y + ---help--- + To support the IEEE 1588 Precision Time Protocol (PTP), select y here + +endif # NET_BFIN diff --git a/drivers/net/ethernet/adi/Makefile b/drivers/net/ethernet/adi/Makefile new file mode 100644 index 00000000000..b1fbe195d0e --- /dev/null +++ b/drivers/net/ethernet/adi/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Blackfin device drivers. +# + +obj-$(CONFIG_BFIN_MAC) += bfin_mac.o diff --git a/drivers/net/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c index 6c019e14854..6c019e14854 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/ethernet/adi/bfin_mac.c diff --git a/drivers/net/bfin_mac.h b/drivers/net/ethernet/adi/bfin_mac.h index f8559ac9a40..f8559ac9a40 100644 --- a/drivers/net/bfin_mac.h +++ b/drivers/net/ethernet/adi/bfin_mac.h |