diff options
| -rw-r--r-- | Documentation/hwmon/dme1737 | 51 | ||||
| -rw-r--r-- | drivers/hwmon/dme1737.c | 328 |
2 files changed, 266 insertions, 113 deletions
diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index 001d2e70bc1..fc5df7654d6 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -9,11 +9,15 @@ Supported chips: * SMSC SCH3112, SCH3114, SCH3116 Prefix: 'sch311x' Addresses scanned: none, address read from Super-I/O config space - Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf + Datasheet: Available on the Internet * SMSC SCH5027 Prefix: 'sch5027' Addresses scanned: I2C 0x2c, 0x2d, 0x2e Datasheet: Provided by SMSC upon request and under NDA + * SMSC SCH5127 + Prefix: 'sch5127' + Addresses scanned: none, address read from Super-I/O config space + Datasheet: Provided by SMSC upon request and under NDA Authors: Juerg Haefliger <juergh@gmail.com> @@ -36,8 +40,8 @@ Description ----------- This driver implements support for the hardware monitoring capabilities of the -SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC -SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors +SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x, +and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and @@ -48,14 +52,14 @@ Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on the configuration of the chip. The driver will detect which features are present during initialization and create the sysfs attributes accordingly. -For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and -pwm[5-6] don't exist. +For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and +fan[4-6] and pwm[5-6] don't exist. The hardware monitoring features of the DME1737, A8000, and SCH5027 are only -accessible via SMBus, while the SCH311x only provides access via the ISA bus. -The driver will therefore register itself as an I2C client driver if it detects -a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x -chip. +accessible via SMBus, while the SCH311x and SCH5127 only provide access via +the ISA bus. The driver will therefore register itself as an I2C client driver +if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it +detects a SCH311x or SCH5127 chip. Voltage Monitoring @@ -76,7 +80,7 @@ DME1737, A8000: in6: Vbat (+3.0V) 0V - 4.38V SCH311x: - in0: +2.5V 0V - 6.64V + in0: +2.5V 0V - 3.32V in1: Vccp (processor core) 0V - 2V in2: VCC (internal +3.3V) 0V - 4.38V in3: +5V 0V - 6.64V @@ -93,6 +97,15 @@ SCH5027: in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V +SCH5127: + in0: +2.5 0V - 3.32V + in1: Vccp (processor core) 0V - 3V + in2: VCC (internal +3.3V) 0V - 4.38V + in3: V2_IN 0V - 1.5V + in4: V1_IN 0V - 1.5V + in5: VTR (+3.3V standby) 0V - 4.38V + in6: Vbat (+3.0V) 0V - 4.38V + Each voltage input has associated min and max limits which trigger an alarm when crossed. @@ -293,3 +306,21 @@ pwm[1-3]_auto_point1_pwm RW Auto PWM pwm point. Auto_point1 is the pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the full-speed duty-cycle which is hard- wired to 255 (100% duty-cycle). + +Chip Differences +---------------- + +Feature dme1737 sch311x sch5027 sch5127 +------------------------------------------------------- +temp[1-3]_offset yes yes +vid yes +zone3 yes yes yes +zone[1-3]_hyst yes yes +pwm min/off yes yes +fan3 opt yes opt yes +pwm3 opt yes opt yes +fan4 opt opt +fan5 opt opt +pwm5 opt opt +fan6 opt opt +pwm6 opt opt diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 823dd28a902..980c17d5eea 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -1,12 +1,14 @@ /* - * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x and - * SCH5027 Super-I/O chips integrated hardware monitoring features. - * Copyright (c) 2007, 2008 Juerg Haefliger <juergh@gmail.com> + * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x, SCH5027, + * and SCH5127 Super-I/O chips integrated hardware monitoring + * features. + * Copyright (c) 2007, 2008, 2009, 2010 Juerg Haefliger <juergh@gmail.com> * * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access * the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus - * if a SCH311x chip is found. Both types of chips have very similar hardware - * monitoring capabilities but differ in the way they can be accessed. + * if a SCH311x or SCH5127 chip is found. Both types of chips have very + * similar hardware monitoring capabilities but differ in the way they can be + * accessed. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -57,7 +59,7 @@ MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC " /* Addresses to scan */ static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END}; -enum chips { dme1737, sch5027, sch311x }; +enum chips { dme1737, sch5027, sch311x, sch5127 }; /* --------------------------------------------------------------------- * Registers @@ -164,10 +166,29 @@ static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23}; #define DME1737_VERSTEP_MASK 0xf8 #define SCH311X_DEVICE 0x8c #define SCH5027_VERSTEP 0x69 +#define SCH5127_DEVICE 0x8e + +/* Device ID values (global configuration register index 0x20) */ +#define DME1737_ID_1 0x77 +#define DME1737_ID_2 0x78 +#define SCH3112_ID 0x7c +#define SCH3114_ID 0x7d +#define SCH3116_ID 0x7f +#define SCH5027_ID 0x89 +#define SCH5127_ID 0x86 /* Length of ISA address segment */ #define DME1737_EXTENT 2 +/* chip-dependent features */ +#define HAS_TEMP_OFFSET (1 << 0) /* bit 0 */ +#define HAS_VID (1 << 1) /* bit 1 */ +#define HAS_ZONE3 (1 << 2) /* bit 2 */ +#define HAS_ZONE_HYST (1 << 3) /* bit 3 */ +#define HAS_PWM_MIN (1 << 4) /* bit 4 */ +#define HAS_FAN(ix) (1 << ((ix) + 5)) /* bits 5-10 */ +#define HAS_PWM(ix) (1 << ((ix) + 11)) /* bits 11-16 */ + /* --------------------------------------------------------------------- * Data structures and manipulation thereof * --------------------------------------------------------------------- */ @@ -187,8 +208,7 @@ struct dme1737_data { u8 vid; u8 pwm_rr_en; - u8 has_pwm; - u8 has_fan; + u32 has_features; /* Register values */ u16 in[7]; @@ -224,8 +244,11 @@ static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300, 3300}; static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300, 3300}; +static const int IN_NOMINAL_SCH5127[] = {2500, 2250, 3300, 1125, 1125, 3300, + 3300}; #define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \ (type) == sch5027 ? IN_NOMINAL_SCH5027 : \ + (type) == sch5127 ? IN_NOMINAL_SCH5127 : \ IN_NOMINAL_DME1737) /* Voltage input @@ -568,7 +591,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) /* Sample register contents every 1 sec */ if (time_after(jiffies, data->last_update + HZ) || !data->valid) { - if (data->type == dme1737) { + if (data->has_features & HAS_VID) { data->vid = dme1737_read(data, DME1737_REG_VID) & 0x3f; } @@ -599,7 +622,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) DME1737_REG_TEMP_MIN(ix)); data->temp_max[ix] = dme1737_read(data, DME1737_REG_TEMP_MAX(ix)); - if (data->type != sch5027) { + if (data->has_features & HAS_TEMP_OFFSET) { data->temp_offset[ix] = dme1737_read(data, DME1737_REG_TEMP_OFFSET(ix)); } @@ -626,7 +649,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) { /* Skip reading registers if optional fans are not * present */ - if (!(data->has_fan & (1 << ix))) { + if (!(data->has_features & HAS_FAN(ix))) { continue; } data->fan[ix] = dme1737_read(data, @@ -650,7 +673,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) for (ix = 0; ix < ARRAY_SIZE(data->pwm); ix++) { /* Skip reading registers if optional PWMs are not * present */ - if (!(data->has_pwm & (1 << ix))) { + if (!(data->has_features & HAS_PWM(ix))) { continue; } data->pwm[ix] = dme1737_read(data, @@ -672,12 +695,24 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) /* Thermal zone registers */ for (ix = 0; ix < ARRAY_SIZE(data->zone_low); ix++) { - data->zone_low[ix] = dme1737_read(data, - DME1737_REG_ZONE_LOW(ix)); - data->zone_abs[ix] = dme1737_read(data, - DME1737_REG_ZONE_ABS(ix)); + /* Skip reading registers if zone3 is not present */ + if ((ix == 2) && !(data->has_features & HAS_ZONE3)) { + continue; + } + /* sch5127 zone2 registers are special */ + if ((ix == 1) && (data->type == sch5127)) { + data->zone_low[1] = dme1737_read(data, + DME1737_REG_ZONE_LOW(2)); + data->zone_abs[1] = dme1737_read(data, + DME1737_REG_ZONE_ABS(2)); + } else { + data->zone_low[ix] = dme1737_read(data, + DME1737_REG_ZONE_LOW(ix)); + data->zone_abs[ix] = dme1737_read(data, + DME1737_REG_ZONE_ABS(ix)); + } } - if (data->type != sch5027) { + if (data->has_features & HAS_ZONE_HYST) { for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) { data->zone_hyst[ix] = dme1737_read(data, DME1737_REG_ZONE_HYST(ix)); @@ -1594,10 +1629,6 @@ static struct attribute *dme1737_attr[] ={ &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr, - &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, - &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, - &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr, NULL }; @@ -1605,27 +1636,23 @@ static const struct attribute_group dme1737_group = { .attrs = dme1737_attr, }; -/* The following struct holds misc attributes, which are not available in all - * chips. Their creation depends on the chip type which is determined during - * module load. */ -static struct attribute *dme1737_misc_attr[] = { - /* Temperatures */ +/* The following struct holds temp offset attributes, which are not available + * in all chips. The following chips support them: + * DME1737, SCH311x */ +static struct attribute *dme1737_temp_offset_attr[] = { &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_offset.dev_attr.attr, - /* Zones */ - &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, - &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, - &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, NULL }; -static const struct attribute_group dme1737_misc_group = { - .attrs = dme1737_misc_attr, +static const struct attribute_group dme1737_temp_offset_group = { + .attrs = dme1737_temp_offset_attr, }; -/* The following struct holds VID-related attributes. Their creation - depends on the chip type which is determined during module load. */ +/* The following struct holds VID related attributes, which are not available + * in all chips. The following chips support them: + * DME1737 */ static struct attribute *dme1737_vid_attr[] = { &dev_attr_vrm.attr, &dev_attr_cpu0_vid.attr, @@ -1636,6 +1663,36 @@ static const struct attribute_group dme1737_vid_group = { .attrs = dme1737_vid_attr, }; +/* The following struct holds temp zone 3 related attributes, which are not + * available in all chips. The following chips support them: + * DME1737, SCH311x, SCH5027 */ +static struct attribute *dme1737_zone3_attr[] = { + &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_zone3_group = { + .attrs = dme1737_zone3_attr, +}; + + +/* The following struct holds temp zone hysteresis related attributes, which + * are not available in all chips. The following chips support them: + * DME1737, SCH311x */ +static struct attribute *dme1737_zone_hyst_attr[] = { + &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_zone_hyst_group = { + .attrs = dme1737_zone_hyst_attr, +}; + /* The following structs hold the PWM attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ @@ -1691,10 +1748,10 @@ static const struct attribute_group dme1737_pwm_group[] = { { .attrs = dme1737_pwm6_attr }, }; -/* The following struct holds misc PWM attributes, which are not available in - * all chips. Their creation depends on the chip type which is determined +/* The following struct holds auto PWM min attributes, which are not available + * in all chips. Their creation depends on the chip type which is determined * during module load. */ -static struct attribute *dme1737_pwm_misc_attr[] = { +static struct attribute *dme1737_auto_pwm_min_attr[] = { &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, @@ -1764,14 +1821,25 @@ static struct attribute *dme1737_zone_chmod_attr[] = { &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_zone_chmod_group = { + .attrs = dme1737_zone_chmod_attr, +}; + + +/* The permissions of the following zone 3 attributes are changed to read- + * writeable if the chip is *not* locked. Otherwise they stay read-only. */ +static struct attribute *dme1737_zone3_chmod_attr[] = { &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, NULL }; -static const struct attribute_group dme1737_zone_chmod_group = { - .attrs = dme1737_zone_chmod_attr, +static const struct attribute_group dme1737_zone3_chmod_group = { + .attrs = dme1737_zone3_chmod_attr, }; /* The permissions of the following PWM attributes are changed to read- @@ -1887,30 +1955,35 @@ static void dme1737_remove_files(struct device *dev) int ix; for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { - if (data->has_fan & (1 << ix)) { + if (data->has_features & HAS_FAN(ix)) { sysfs_remove_group(&dev->kobj, &dme1737_fan_group[ix]); } } for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) { - if (data->has_pwm & (1 << ix)) { + if (data->has_features & HAS_PWM(ix)) { sysfs_remove_group(&dev->kobj, &dme1737_pwm_group[ix]); - if (data->type != sch5027 && ix < 3) { + if ((data->has_features & HAS_PWM_MIN) && ix < 3) { sysfs_remove_file(&dev->kobj, - dme1737_pwm_misc_attr[ix]); + dme1737_auto_pwm_min_attr[ix]); } } } - if (data->type != sch5027) { - sysfs_remove_group(&dev->kobj, &dme1737_misc_group); + if (data->has_features & HAS_TEMP_OFFSET) { + sysfs_remove_group(&dev->kobj, &dme1737_temp_offset_group); } - if (data->type == dme1737) { + if (data->has_features & HAS_VID) { sysfs_remove_group(&dev->kobj, &dme1737_vid_group); } - + if (data->has_features & HAS_ZONE3) { + sysfs_remove_group(&dev->kobj, &dme1737_zone3_group); + } + if (data->has_features & HAS_ZONE_HYST) { + sysfs_remove_group(&dev->kobj, &dme1737_zone_hyst_group); + } sysfs_remove_group(&dev->kobj, &dme1737_group); if (!data->client) { @@ -1934,23 +2007,31 @@ static int dme1737_create_files(struct device *dev) goto exit_remove; } - /* Create misc sysfs attributes */ - if ((data->type != sch5027) && + /* Create chip-dependent sysfs attributes */ + if ((data->has_features & HAS_TEMP_OFFSET) && (err = sysfs_create_group(&dev->kobj, - &dme1737_misc_group))) { + &dme1737_temp_offset_group))) { goto exit_remove; } - - /* Create VID-related sysfs attributes */ - if ((data->type == dme1737) && + if ((data->has_features & HAS_VID) && (err = sysfs_create_group(&dev->kobj, &dme1737_vid_group))) { goto exit_remove; } + if ((data->has_features & HAS_ZONE3) && + (err = sysfs_create_group(&dev->kobj, + &dme1737_zone3_group))) { + goto exit_remove; + } + if ((data->has_features & HAS_ZONE_HYST) && + (err = sysfs_create_group(&dev->kobj, + &dme1737_zone_hyst_group))) { + goto exit_remove; + } /* Create fan sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { - if (data->has_fan & (1 << ix)) { + if (data->has_features & HAS_FAN(ix)) { if ((err = sysfs_create_group(&dev->kobj, &dme1737_fan_group[ix]))) { goto exit_remove; @@ -1960,14 +2041,14 @@ static int dme1737_create_files(struct device *dev) /* Create PWM sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) { - if (data->has_pwm & (1 << ix)) { + if (data->has_features & HAS_PWM(ix)) { if ((err = sysfs_create_group(&dev->kobj, &dme1737_pwm_group[ix]))) { goto exit_remove; } - if (data->type != sch5027 && ix < 3 && + if ((data->has_features & HAS_PWM_MIN) && ix < 3 && (err = sysfs_create_file(&dev->kobj, - dme1737_pwm_misc_attr[ix]))) { + dme1737_auto_pwm_min_attr[ix]))) { goto exit_remove; } } @@ -1983,21 +2064,30 @@ static int dme1737_create_files(struct device *dev) dme1737_chmod_group(dev, &dme1737_zone_chmod_group, S_IRUGO | S_IWUSR); - /* Change permissions of misc sysfs attributes */ - if (data->type != sch5027) { - dme1737_chmod_group(dev, &dme1737_misc_group, + /* Change permissions of chip-dependent sysfs attributes */ + if (data->has_features & HAS_TEMP_OFFSET) { + dme1737_chmod_group(dev, &dme1737_temp_offset_group, + S_IRUGO | S_IWUSR); + } + if (data->has_features & HAS_ZONE3) { + dme1737_chmod_group(dev, &dme1737_zone3_chmod_group, + S_IRUGO | S_IWUSR); + } + if (data->has_features & HAS_ZONE_HYST) { + dme1737_chmod_group(dev, &dme1737_zone_hyst_group, S_IRUGO | S_IWUSR); } /* Change permissions of PWM sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) { - if (data->has_pwm & (1 << ix)) { + if (data->has_features & HAS_PWM(ix)) { dme1737_chmod_group(dev, &dme1737_pwm_chmod_group[ix], S_IRUGO | S_IWUSR); - if (data->type != sch5027 && ix < 3) { + if ((data->has_features & HAS_PWM_MIN) && + ix < 3) { dme1737_chmod_file(dev, - dme1737_pwm_misc_attr[ix], + dme1737_auto_pwm_min_attr[ix], S_IRUGO | S_IWUSR); } } @@ -2005,7 +2095,7 @@ static int dme1737_create_files(struct device *dev) /* Change permissions of pwm[1-3] if in manual mode */ for (ix = 0; ix < 3; ix++) { - if ((data->has_pwm & (1 << ix)) && + if ((data->has_features & HAS_PWM(ix)) && (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) { dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], @@ -2052,20 +2142,20 @@ static int dme1737_init_device(struct device *dev) return -EFAULT; } - /* Determine which optional fan and pwm features are enabled/present */ + /* Determine which optional fan and pwm features are enabled (only + * valid for I2C devices) */ if (client) { /* I2C chip */ data->config2 = dme1737_read(data, DME1737_REG_CONFIG2); /* Check if optional fan3 input is enabled */ if (data->config2 & 0x04) { - data->has_fan |= (1 << 2); + data->has_features |= HAS_FAN(2); } /* Fan4 and pwm3 are only available if the client's I2C address * is the default 0x2e. Otherwise the I/Os associated with * these functions are used for addr enable/select. */ if (client->addr == 0x2e) { - data->has_fan |= (1 << 3); - data->has_pwm |= (1 << 2); + data->has_features |= HAS_FAN(3) | HAS_PWM(2); } /* Determine which of the optional fan[5-6] and pwm[5-6] @@ -2077,26 +2167,40 @@ static int dme1737_init_device(struct device *dev) dev_warn(dev, "Failed to query Super-IO for optional " "features.\n"); } - } else { /* ISA chip */ - /* Fan3 and pwm3 are always available. Fan[4-5] and pwm[5-6] - * don't exist in the ISA chip. */ - data->has_fan |= (1 << 2); - data->has_pwm |= (1 << 2); } - /* Fan1, fan2, pwm1, and pwm2 are always present */ - data->has_fan |= 0x03; - data->has_pwm |= 0x03; + /* Fan[1-2] and pwm[1-2] are present in all chips */ + data->has_features |= HAS_FAN(0) | HAS_FAN(1) | HAS_PWM(0) | HAS_PWM(1); + + /* Chip-dependent features */ + switch (data->type) { + case dme1737: + data->has_features |= HAS_TEMP_OFFSET | HAS_VID | HAS_ZONE3 | + HAS_ZONE_HYST | HAS_PWM_MIN; + break; + case sch311x: + data->has_features |= HAS_TEMP_OFFSET | HAS_ZONE3 | + HAS_ZONE_HYST | HAS_PWM_MIN | HAS_FAN(2) | HAS_PWM(2); + break; + case sch5027: + data->has_features |= HAS_ZONE3; + break; + case sch5127: + data->has_features |= HAS_FAN(2) | HAS_PWM(2); + break; + default: + break; + } dev_info(dev, "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, " "fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n", - (data->has_pwm & (1 << 2)) ? "yes" : "no", - (data->has_pwm & (1 << 4)) ? "yes" : "no", - (data->has_pwm & (1 << 5)) ? "yes" : "no", - (data->has_fan & (1 << 2)) ? "yes" : "no", - (data->has_fan & (1 << 3)) ? "yes" : "no", - (data->has_fan & (1 << 4)) ? "yes" : "no", - (data->has_fan & (1 << 5)) ? "yes" : "no"); + (data->has_features & HAS_PWM(2)) ? "yes" : "no", + (data->has_features & HAS_PWM(4)) ? "yes" : "no", + (data->has_features & HAS_PWM(5)) ? "yes" : "no", + (data->has_features & HAS_FAN(2)) ? "yes" : "no", + (data->has_features & HAS_FAN(3)) ? "yes" : "no", + (data->has_features & HAS_FAN(4)) ? "yes" : "no", + (data->has_features & HAS_FAN(5)) ? "yes" : "no"); reg = dme1737_read(data, DME1737_REG_TACH_PWM); /* Inform if fan-to-pwm mapping differs from the default */ @@ -2122,7 +2226,7 @@ static int dme1737_init_device(struct device *dev) for (ix = 0; ix < 3; ix++) { data->pwm_config[ix] = dme1737_read(data, DME1737_REG_PWM_CONFIG(ix)); - if ((data->has_pwm & (1 << ix)) && + if ((data->has_features & HAS_PWM(ix)) && (PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) { dev_info(dev, "Switching pwm%d to " "manual mode.\n", ix + 1); @@ -2142,7 +2246,7 @@ static int dme1737_init_device(struct device *dev) data->pwm_acz[2] = 4; /* pwm3 -> zone3 */ /* Set VRM */ - if (data->type == dme1737) { + if (data->has_features & HAS_VID) { data->vrm = vid_which_vrm(); } @@ -2163,10 +2267,10 @@ static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data) dme1737_sio_enter(sio_cip); /* Check device ID - * The DME1737 can return either 0x78 or 0x77 as its device ID. - * The SCH5027 returns 0x89 as its device ID. */ + * We currently know about two kinds of DME1737 and SCH5027. */ reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20); - if (!(reg == 0x77 || reg == 0x78 || reg == 0x89)) { + if (!(reg == DME1737_ID_1 || reg == DME1737_ID_2 || + reg == SCH5027_ID)) { err = -ENODEV; goto exit; } @@ -2185,16 +2289,16 @@ static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data) * are enabled and available. Bits [3:2] of registers 0x43-0x46 are set * to '10' if the respective feature is enabled. */ if ((inb(addr + 0x43) & 0x0c) == 0x08) { /* fan6 */ - data->has_fan |= (1 << 5); + data->has_features |= HAS_FAN(5); } if ((inb(addr + 0x44) & 0x0c) == 0x08) { /* pwm6 */ - data->has_pwm |= (1 << 5); + data->has_features |= HAS_PWM(5); } if ((inb(addr + 0x45) & 0x0c) == 0x08) { /* fan5 */ - data->has_fan |= (1 << 4); + data->has_features |= HAS_FAN(4); } if ((inb(addr + 0x46) & 0x0c) == 0x08) { /* pwm5 */ - data->has_pwm |= (1 << 4); + data->has_features |= HAS_PWM(4); } exit: @@ -2222,7 +2326,6 @@ static int dme1737_i2c_detect(struct i2c_client *client, if (company == DME1737_COMPANY_SMSC && verstep == SCH5027_VERSTEP) { name = "sch5027"; - } else if (company == DME1737_COMPANY_SMSC && (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) { name = "dme1737"; @@ -2329,10 +2432,10 @@ static int __init dme1737_isa_detect(int sio_cip, unsigned short *addr) dme1737_sio_enter(sio_cip); /* Check device ID - * We currently know about SCH3112 (0x7c), SCH3114 (0x7d), and - * SCH3116 (0x7f). */ + * We currently know about SCH3112, SCH3114, SCH3116, and SCH5127 */ reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20); - if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) { + if (!(reg == SCH3112_ID || reg == SCH3114_ID || reg == SCH3116_ID || + reg == SCH5127_ID)) { err = -ENODEV; goto exit; } @@ -2424,23 +2527,42 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); /* Skip chip detection if module is loaded with force_id parameter */ - if (!force_id) { + switch (force_id) { + case SCH3112_ID: + case SCH3114_ID: + case SCH3116_ID: + data->type = sch311x; + break; + case SCH5127_ID: + data->type = sch5127; + break; + default: company = dme1737_read(data, DME1737_REG_COMPANY); device = dme1737_read(data, DME1737_REG_DEVICE); - if (!((company == DME1737_COMPANY_SMSC) && - (device == SCH311X_DEVICE))) { + if ((company == DME1737_COMPANY_SMSC) && + (device == SCH311X_DEVICE)) { + data->type = sch311x; + } else if ((company == DME1737_COMPANY_SMSC) && + (device == SCH5127_DEVICE)) { + data->type = sch5127; + } else { err = -ENODEV; goto exit_kfree; } } - data->type = sch311x; - /* Fill in the remaining client fields and initialize the mutex */ - data->name = "sch311x"; + if (data->type == sch5127) { + data->name = "sch5127"; + } else { + data->name = "sch311x"; + } + + /* Initialize the mutex */ mutex_init(&data->update_lock); - dev_info(dev, "Found a SCH311x chip at 0x%04x\n", data->addr); + dev_info(dev, "Found a %s chip at 0x%04x\n", + data->type == sch5127 ? "SCH5127" : "SCH311x", data->addr); /* Initialize the chip */ if ((err = dme1737_init_device(dev))) { |