22 files changed, 124 insertions, 85 deletions

diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt
index 7304bcf5a30..5e6b64c20d2 100644
--- a/Documentation/usb/anchors.txt
+++ b/Documentation/usb/anchors.txt
@@ -42,9 +42,21 @@ This function kills all URBs associated with an anchor. The URBs
 are called in the reverse temporal order they were submitted.
 This way no data can be reordered.
 
+usb_unlink_anchored_urbs()
+--------------------------
+
+This function unlinks all URBs associated with an anchor. The URBs
+are processed in the reverse temporal order they were submitted.
+This is similar to usb_kill_anchored_urbs(), but it will not sleep.
+Therefore no guarantee is made that the URBs have been unlinked when
+the call returns. They may be unlinked later but will be unlinked in
+finite time.
+
 usb_wait_anchor_empty_timeout()
 -------------------------------
 
 This function waits for all URBs associated with an anchor to finish
 or a timeout, whichever comes first. Its return value will tell you
 whether the timeout was reached.
+
+
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 8abd4e59bf4..8ab389dca2b 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1876,7 +1876,8 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		 * with IRQF_SHARED. As usb_hcd_irq() will always disable
 		 * interrupts we can remove it here.
 		 */
-		irqflags &= ~IRQF_DISABLED;
+		if (irqflags & IRQF_SHARED)
+			irqflags &= ~IRQF_DISABLED;
 
 		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
 				hcd->driver->description, hcd->self.busnum);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 6a5cb018383..d99963873e3 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2683,35 +2683,17 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 				USB_PORT_STAT_C_ENABLE);
 #endif
 
-	/* Try to use the debounce delay for protection against
-	 * port-enable changes caused, for example, by EMI.
-	 */
-	if (portchange & (USB_PORT_STAT_C_CONNECTION |
-				USB_PORT_STAT_C_ENABLE)) {
-		status = hub_port_debounce(hub, port1);
-		if (status < 0) {
-			if (printk_ratelimit())
-				dev_err (hub_dev, "connect-debounce failed, "
-						"port %d disabled\n", port1);
-			portstatus &= ~USB_PORT_STAT_CONNECTION;
-		} else {
-			portstatus = status;
-		}
-	}
-
 	/* Try to resuscitate an existing device */
 	udev = hdev->children[port1-1];
 	if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
 			udev->state != USB_STATE_NOTATTACHED) {
-
 		usb_lock_device(udev);
 		if (portstatus & USB_PORT_STAT_ENABLE) {
 			status = 0;		/* Nothing to do */
-		} else if (!udev->persist_enabled) {
-			status = -ENODEV;	/* Mustn't resuscitate */
 
 #ifdef CONFIG_USB_SUSPEND
-		} else if (udev->state == USB_STATE_SUSPENDED) {
+		} else if (udev->state == USB_STATE_SUSPENDED &&
+				udev->persist_enabled) {
 			/* For a suspended device, treat this as a
 			 * remote wakeup event.
 			 */
@@ -2726,7 +2708,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 #endif
 
 		} else {
-			status = usb_reset_device(udev);
+			status = -ENODEV;	/* Don't resuscitate */
 		}
 		usb_unlock_device(udev);
 
@@ -2741,6 +2723,19 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		usb_disconnect(&hdev->children[port1-1]);
 	clear_bit(port1, hub->change_bits);
 
+	if (portchange & (USB_PORT_STAT_C_CONNECTION |
+				USB_PORT_STAT_C_ENABLE)) {
+		status = hub_port_debounce(hub, port1);
+		if (status < 0) {
+			if (printk_ratelimit())
+				dev_err(hub_dev, "connect-debounce failed, "
+						"port %d disabled\n", port1);
+			portstatus &= ~USB_PORT_STAT_CONNECTION;
+		} else {
+			portstatus = status;
+		}
+	}
+
 	/* Return now if debouncing failed or nothing is connected */
 	if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
 
@@ -2748,7 +2743,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
 				&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
- 
+
 		if (portstatus & USB_PORT_STAT_ENABLE)
   			goto done;
 		return;
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 1cfccf102a2..45ad556169f 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -223,7 +223,7 @@ static int dr_controller_setup(struct fsl_udc *udc)
 	fsl_writel(tmp, &dr_regs->endpointlistaddr);
 
 	VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
-		(int)udc->ep_qh, (int)tmp,
+		udc->ep_qh, (int)tmp,
 		fsl_readl(&dr_regs->endpointlistaddr));
 
 	/* Config PHY interface */
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 574c53831a0..bb54cca4c54 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -787,7 +787,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 			omap_set_dma_dest_params(ep->lch,
 				OMAP_DMA_PORT_TIPB,
 				OMAP_DMA_AMODE_CONSTANT,
-				(unsigned long) io_v2p(UDC_DATA_DMA),
+				UDC_DATA_DMA,
 				0, 0);
 		}
 	} else {
@@ -804,7 +804,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 			omap_set_dma_src_params(ep->lch,
 				OMAP_DMA_PORT_TIPB,
 				OMAP_DMA_AMODE_CONSTANT,
-				(unsigned long) io_v2p(UDC_DATA_DMA),
+				UDC_DATA_DMA,
 				0, 0);
 			/* EMIFF or SDRC */
 			omap_set_dma_dest_burst_mode(ep->lch,
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index d9d53f289ca..8409e0705d6 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -145,16 +145,6 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
 	return -ETIMEDOUT;
 }
 
-static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
-				       u32 mask, u32 done, int usec)
-{
-	int error = handshake(ehci, ptr, mask, done, usec);
-	if (error)
-		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
-
-	return error;
-}
-
 /* force HC to halt state from unknown (EHCI spec section 2.3) */
 static int ehci_halt (struct ehci_hcd *ehci)
 {
@@ -173,6 +163,22 @@ static int ehci_halt (struct ehci_hcd *ehci)
 			  STS_HALT, STS_HALT, 16 * 125);
 }
 
+static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
+				       u32 mask, u32 done, int usec)
+{
+	int error;
+
+	error = handshake(ehci, ptr, mask, done, usec);
+	if (error) {
+		ehci_halt(ehci);
+		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+		ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n",
+			ptr, mask, done, error);
+	}
+
+	return error;
+}
+
 /* put TDI/ARC silicon into EHCI mode */
 static void tdi_reset (struct ehci_hcd *ehci)
 {
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index b7853c8bac0..4a0c5a78b2e 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -437,6 +437,9 @@ static int enable_periodic (struct ehci_hcd *ehci)
 	u32	cmd;
 	int	status;
 
+	if (ehci->periodic_sched++)
+		return 0;
+
 	/* did clearing PSE did take effect yet?
 	 * takes effect only at frame boundaries...
 	 */
@@ -461,6 +464,9 @@ static int disable_periodic (struct ehci_hcd *ehci)
 	u32	cmd;
 	int	status;
 
+	if (--ehci->periodic_sched)
+		return 0;
+
 	/* did setting PSE not take effect yet?
 	 * takes effect only at frame boundaries...
 	 */
@@ -544,13 +550,10 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		: (qh->usecs * 8);
 
 	/* maybe enable periodic schedule processing */
-	if (!ehci->periodic_sched++)
-		return enable_periodic (ehci);
-
-	return 0;
+	return enable_periodic(ehci);
 }
 
-static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
+static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
 	unsigned	i;
 	unsigned	period;
@@ -586,9 +589,7 @@ static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	qh_put (qh);
 
 	/* maybe turn off periodic schedule */
-	ehci->periodic_sched--;
-	if (!ehci->periodic_sched)
-		(void) disable_periodic (ehci);
+	return disable_periodic(ehci);
 }
 
 static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
@@ -1562,9 +1563,7 @@ itd_link_urb (
 	urb->hcpriv = NULL;
 
 	timer_action (ehci, TIMER_IO_WATCHDOG);
-	if (unlikely (!ehci->periodic_sched++))
-		return enable_periodic (ehci);
-	return 0;
+	return enable_periodic(ehci);
 }
 
 #define	ISO_ERRS (EHCI_ISOC_BUF_ERR | EHCI_ISOC_BABBLE | EHCI_ISOC_XACTERR)
@@ -1642,7 +1641,7 @@ itd_complete (
 	ehci_urb_done(ehci, urb, 0);
 	retval = true;
 	urb = NULL;
-	ehci->periodic_sched--;
+	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
 	if (unlikely (list_empty (&stream->td_list))) {
@@ -1951,9 +1950,7 @@ sitd_link_urb (
 	urb->hcpriv = NULL;
 
 	timer_action (ehci, TIMER_IO_WATCHDOG);
-	if (!ehci->periodic_sched++)
-		return enable_periodic (ehci);
-	return 0;
+	return enable_periodic(ehci);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -2019,7 +2016,7 @@ sitd_complete (
 	ehci_urb_done(ehci, urb, 0);
 	retval = true;
 	urb = NULL;
-	ehci->periodic_sched--;
+	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
 	if (list_empty (&stream->td_list)) {
@@ -2243,8 +2240,7 @@ restart:
 			if (unlikely (modified)) {
 				if (likely(ehci->periodic_sched > 0))
 					goto restart;
-				/* maybe we can short-circuit this scan! */
-				disable_periodic(ehci);
+				/* short-circuit this scan */
 				now_uframe = clock;
 				break;
 			}
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index a0017486ad4..58b2b8fc943 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -9,6 +9,7 @@ comment "Enable Host or Gadget support to see Inventra options"
 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
 config USB_MUSB_HDRC
 	depends on (USB || USB_GADGET) && HAVE_CLK
+	depends on !SUPERH
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
 	help
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c5b8f0296fc..128e949db47 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -100,8 +100,8 @@
 #include <linux/io.h>
 
 #ifdef	CONFIG_ARM
-#include <asm/arch/hardware.h>
-#include <asm/arch/memory.h>
+#include <mach/hardware.h>
+#include <mach/memory.h>
 #include <asm/mach-types.h>
 #endif
 
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 298b22e6ad0..9d2dcb121c5 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -35,8 +35,8 @@
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/mux.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index 786a62071f7..dc7670718cd 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -11,8 +11,8 @@
 #define __MUSB_OMAP243X_H__
 
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
-#include <asm/arch/hardware.h>
-#include <asm/arch/usb.h>
+#include <mach/hardware.h>
+#include <mach/usb.h>
 
 /*
  * OMAP2430-specific definitions
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 442cba69cce..1279553381e 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -72,6 +72,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
@@ -83,6 +84,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
@@ -93,6 +95,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ } /* Terminating Entry */
 };
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 984f6eff4c4..3dc93b542b3 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -654,6 +654,9 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 382265bba96..8a5b6df3a97 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -750,6 +750,7 @@
 
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
+#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
 
 /*
  * ACG Identification Technologies GmbH products (http://www.acg.de/).
@@ -838,6 +839,10 @@
 /* Rig Expert Ukraine devices */
 #define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
 
+/* Domintell products  http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
+#define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9f9cd36455f..73f8277f88f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -218,6 +218,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
 #define ZTE_PRODUCT_MF628			0x0015
+#define ZTE_PRODUCT_CDMA_TECH			0xfffe
 
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -347,6 +348,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 706033753ad..ea1a103c99b 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.2.13a"
+#define DRIVER_VERSION "v.1.3.2"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -30,9 +30,6 @@
 
 #define SWIMS_USB_REQUEST_SetPower	0x00
 #define SWIMS_USB_REQUEST_SetNmea	0x07
-#define SWIMS_USB_REQUEST_SetMode	0x0B
-#define SWIMS_USB_REQUEST_GetSwocInfo	0x0A
-#define SWIMS_SET_MODE_Modem		0x0001
 
 /* per port private data */
 #define N_IN_URB	4
@@ -163,7 +160,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
 	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
-	{ USB_DEVICE(0x0f30, 0x1b1d) },	/* Sierra Wireless MC5720 */
+	{ USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
 	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
 	{ USB_DEVICE(0x1199, 0x0220) },	/* Sierra Wireless MC5725 */
@@ -175,6 +172,8 @@ static struct usb_device_id id_table [] = {
 	 /* Sierra Wireless Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
 	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
+	{ USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
+	{ USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
 
 	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
@@ -187,6 +186,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x6821) },	/* Sierra Wireless AirCard 875U */
 	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780 */
 	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x683A) },	/* Sierra Wireless MC8785 */
 	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
 	{ USB_DEVICE(0x1199, 0x683C) },	/* Sierra Wireless MC8790 */
 	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8790 */
@@ -204,6 +204,8 @@ static struct usb_device_id id_table [] = {
 	/* Sierra Wireless Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
 	/* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
 
 	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index e39c779e416..9a3e495c769 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1744,7 +1744,7 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
 	if (buffer) {
 		memcpy(buffer, fw_p->data, fw_p->size);
 		memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
-		ti_do_download(dev, pipe, buffer, fw_p->size);
+		status = ti_do_download(dev, pipe, buffer, fw_p->size);
 		kfree(buffer);
 	}
 	release_firmware(fw_p);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index b157c48e8b7..4f7f9e3ae0a 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -733,7 +733,9 @@ int usb_serial_probe(struct usb_interface *interface,
 	    ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
 	     (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
 	    ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
-	     (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) {
+	     (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
+	    ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
+	     (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
 		if (interface != dev->actconfig->interface[0]) {
 			/* check out the endpoints of the other interface*/
 			iface_desc = dev->actconfig->interface[0]->cur_altsetting;
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index c76034672c1..3d9249632ae 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -146,18 +146,6 @@ config USB_STORAGE_KARMA
 	  on the resulting scsi device node returns the Karma to normal
 	  operation.
 
-config USB_STORAGE_SIERRA
-	bool "Sierra Wireless TRU-Install Feature Support"
-	depends on USB_STORAGE
-	help
-	  Say Y here to include additional code to support Sierra Wireless
-	  products with the TRU-Install feature (e.g., AC597E, AC881U).
-
-	  This code switches the Sierra Wireless device from being in
-	  Mass Storage mode to Modem mode. It also has the ability to
-	  support host software upgrades should full Linux support be added
-	  to TRU-Install.
-
 config USB_STORAGE_CYPRESS_ATACB
 	bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
 	depends on USB_STORAGE
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index bc3415b475c..7f8beb5366a 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -21,11 +21,10 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= alauda.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= onetouch.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)	+= karma.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA)	+= sierra_ms.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
-			initializers.o $(usb-storage-obj-y)
+			initializers.o sierra_ms.o $(usb-storage-obj-y)
 
 ifneq ($(CONFIG_USB_LIBUSUAL),)
 	obj-$(CONFIG_USB)	+= libusual.o
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index ba412e68d47..cd155475cb6 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -160,6 +160,13 @@ UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0592,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Filip Joelsson <filip@blueturtle.nu> */
+UNUSUAL_DEV(  0x0421, 0x005d, 0x0001, 0x0600,
+		"Nokia",
+		"Nokia 3110c",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Mario Rettig <mariorettig@web.de> */
 UNUSUAL_DEV(  0x0421, 0x042e, 0x0100, 0x0100,
 		"Nokia",
@@ -232,6 +239,20 @@ UNUSUAL_DEV(  0x0421, 0x04b9, 0x0551, 0x0551,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Richard Nauber <RichardNauber@web.de> */
+UNUSUAL_DEV(  0x0421, 0x04fa, 0x0601, 0x0601,
+		"Nokia",
+		"6300",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/* Patch for Nokia 5310 capacity */
+UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
+	"Nokia",
+	"5310",
+	US_SC_DEVICE, US_PR_DEVICE, NULL,
+	US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		"SMSC",
@@ -987,6 +1008,13 @@ UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
+UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
+		"RockChip",
+		"MP3",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
  * This USB MP3/AVI player device fails and disconnects if more than 128
  * sectors (64kB) are read/written in a single command, and may be present
@@ -1576,7 +1604,6 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		0),
 
-#ifdef CONFIG_USB_STORAGE_SIERRA
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
@@ -1587,7 +1614,6 @@ UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
 		"USB MMC Storage",
 		US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
 		0),
-#endif
 
 /* Reported by Jaco Kroon <jaco@kroon.co.za>
  * The usb-storage module found on the Digitech GNX4 (and supposedly other
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 73679aa506d..27016fd2cad 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -102,9 +102,7 @@
 #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
 #include "cypress_atacb.h"
 #endif
-#ifdef CONFIG_USB_STORAGE_SIERRA
 #include "sierra_ms.h"
-#endif
 
 /* Some informational data */
 MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");