diff options
89 files changed, 956 insertions, 1008 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067efd484..6207cf734b2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -937,7 +937,6 @@ config ARCH_OMAP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK - select NEED_MACH_GPIO_H help Support for TI's OMAP platform (OMAP1/2/3/4). diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index cd169c38616..f0e69cbc5ba 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o +obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ + serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 8b5800acf72..e067f221f0f 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -30,13 +30,13 @@ #include <mach/tc.h> #include <mach/mux.h> #include <mach/flash.h> -#include <../plat-omap/fpga.h> #include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" /* fsample is pretty close to p2-sample */ diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index c66334f2247..f8033fab0f8 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -33,7 +33,6 @@ #include <mach/mux.h> #include <mach/flash.h> -#include <../plat-omap/fpga.h> #include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 030bd48727b..9a7e483ed6f 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -30,13 +30,13 @@ #include <mach/tc.h> #include <mach/mux.h> -#include <../plat-omap/fpga.h> #include <mach/flash.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" static const unsigned int p2_keymap[] = { KEY(0, 0, KEY_UP), diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 931f3f6d396..4f5fd4a084c 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -24,12 +24,11 @@ #include <mach/hardware.h> -#include "../plat-omap/sram.h" - #include "soc.h" #include "iomap.h" #include "clock.h" #include "opp.h" +#include "sram.h" __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 28aea55a412..cb7c6ae2e3f 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -27,10 +27,9 @@ #include <mach/hardware.h> #include <mach/usb.h> /* for OTG_BASE */ -#include "../plat-omap/sram.h" - #include "iomap.h" #include "clock.h" +#include "sram.h" /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ #define IDL_CLKOUT_ARM_SHIFT 12 diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index d6ac18d04da..dab2e102b9d 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -26,11 +26,10 @@ #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H #define __ARCH_ARM_MACH_OMAP1_COMMON_H -#include "../plat-omap/common.h" #include <linux/mtd/mtd.h> #include <linux/i2c-omap.h> -#include "../plat-omap/i2c.h" +#include <plat/i2c.h> #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 645668e2b1d..7155ed8b97f 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -26,12 +26,11 @@ #include <mach/camera.h> #include <mach/hardware.h> -#include "../plat-omap/sram.h" - #include "common.h" #include "clock.h" #include "dma.h" #include "mmc.h" +#include "sram.h" #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 71305c15fbd..978aed85d32 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -321,6 +321,9 @@ static int __init omap1_system_dma_init(void) d->dev_caps = ENABLE_1510_MODE; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; + if (cpu_is_omap16xx()) + d->dev_caps = ENABLE_16XX_MODE; + d->dev_caps |= SRC_PORT; d->dev_caps |= DST_PORT; d->dev_caps |= SRC_INDEX; diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index d940fac9a9e..8bd71b2d096 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -27,12 +27,11 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <../plat-omap/fpga.h> - #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" static void fpga_mask_irq(struct irq_data *d) { diff --git a/arch/arm/plat-omap/fpga.h b/arch/arm/mach-omap1/fpga.h index 54faaa93e6f..4b4307a80e4 100644 --- a/arch/arm/plat-omap/fpga.h +++ b/arch/arm/mach-omap1/fpga.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/fpga.h - * * Interrupt handler for OMAP-1510 FPGA * * Copyright (C) 2001 RidgeRun, Inc. @@ -38,26 +36,6 @@ #define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ #define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - /* LEDs definition on debug board (16 LEDs, all physically green) */ #define H2P2_DBG_FPGA_LED_GREEN (1 << 15) #define H2P2_DBG_FPGA_LED_AMBER (1 << 14) diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 98e6f39224a..02b3eb2e201 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 33f419236b1..b9952a258d8 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 #define OMAP1610_GPIO3_BASE 0xfffbb400 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 958ce9acee9..f5819b2b7cb 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 #define OMAP7XX_GPIO3_BASE 0xfffbd000 diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index 32bcbb8d6c7..faca808cb3d 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -23,7 +23,7 @@ #include <mach/mux.h> #include "soc.h" -#include "../plat-omap/i2c.h" +#include <plat/i2c.h> #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 @@ -54,6 +54,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, struct platform_device *pdev; struct resource *res; + if (bus_id > 1) + return -EINVAL; + omap1_i2c_mux_pins(bus_id); pdev = &omap_i2c_devices[bus_id - 1]; diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index 88f08cab171..78a8c6c2476 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -13,8 +13,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include "../../iomap.h" - .macro get_irqnr_preamble, base, tmp .endm diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h deleted file mode 100644 index ebf86c0f4f4..00000000000 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/gpio.h - */ diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index dc3237bd72d..5875a5098d3 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -39,7 +39,7 @@ #include <asm/sizes.h> #ifndef __ASSEMBLER__ #include <asm/types.h> -#include "../../mach-omap1/soc.h" +#include <mach/soc.h> /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these @@ -72,6 +72,9 @@ static inline u32 omap_cs3_phys(void) #endif /* ifndef __ASSEMBLER__ */ +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + #include <mach/serial.h> /* diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index 351ae4f2c51..3c253052311 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -19,7 +19,7 @@ * because of the strncmp(). */ #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) -#include "../../mach-omap1/soc.h" +#include <mach/soc.h> /* * OMAP-1510 Local Bus address offset diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h new file mode 100644 index 00000000000..6cf9c1cc2be --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/soc.h @@ -0,0 +1,229 @@ +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +#ifndef __ASSEMBLY__ + +#include <linux/bitops.h> + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730, OMAP850 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap310(): True for OMAP310 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) + +#define cpu_is_omap310() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 + +/* These are needed to compile common code */ +#ifdef CONFIG_ARCH_OMAP1 +#define cpu_is_omap242x() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap24xx() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap44xx() 0 +#define soc_is_omap54xx() 0 +#define soc_is_am33xx() 0 +#define cpu_class_is_omap1() 1 +#define cpu_class_is_omap2() 0 +#endif + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 310 vs. 1510 and 1611B/5912 vs. 1710. + */ + +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 44389d7cd25..5a3b80617a1 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -134,7 +134,6 @@ void __init omap1_init_early(void) */ omap1_clk_init(); omap1_mux_init(); - omap_init_consistent_dma_size(); } void __init omap1_init_late(void) diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h index 330c4716b02..f4e2d7a2136 100644 --- a/arch/arm/mach-omap1/iomap.h +++ b/arch/arm/mach-omap1/iomap.h @@ -22,9 +22,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - /* * ---------------------------------------------------------------------------- * Omap1 specific IO mapping diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index b2c2328d7c1..66d663a6ef3 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -44,6 +44,7 @@ #include <linux/io.h> #include <linux/atomic.h> +#include <asm/fncpy.h> #include <asm/system_misc.h> #include <asm/irq.h> #include <asm/mach/time.h> @@ -56,11 +57,10 @@ #include <mach/irqs.h> -#include "../plat-omap/sram.h" - #include "iomap.h" #include "clock.h" #include "pm.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 0e628743bd0..a908c51839a 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -36,6 +36,8 @@ #include <asm/assembler.h> +#include <mach/hardware.h> + #include "iomap.h" #include "pm.h" diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h index 6cf9c1cc2be..69daf0187b1 100644 --- a/arch/arm/mach-omap1/soc.h +++ b/arch/arm/mach-omap1/soc.h @@ -1,229 +1,4 @@ /* - * OMAP cpu type detection - * - * Copyright (C) 2004, 2008 Nokia Corporation - * - * Copyright (C) 2009-11 Texas Instruments. - * - * Written by Tony Lindgren <tony.lindgren@nokia.com> - * - * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * + * We can move mach/soc.h here once the drivers are fixed */ - -#ifndef __ASM_ARCH_OMAP_CPU_H -#define __ASM_ARCH_OMAP_CPU_H - -#ifndef __ASSEMBLY__ - -#include <linux/bitops.h> - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif - -/* - * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] - */ -unsigned int omap_rev(void); - -/* - * Get the CPU revision for OMAP devices - */ -#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - */ -#define GET_OMAP_CLASS (omap_rev() & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap310(): True for OMAP310 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - */ -#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) - -#define cpu_is_omap310() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 - -/* These are needed to compile common code */ -#ifdef CONFIG_ARCH_OMAP1 -#define cpu_is_omap242x() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap44xx() 0 -#define soc_is_omap54xx() 0 -#define soc_is_am33xx() 0 -#define cpu_class_is_omap1() 1 -#define cpu_class_is_omap2() 0 -#endif - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 310 vs. 1510 and 1611B/5912 vs. 1710. - */ - -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#endif /* __ASSEMBLY__ */ -#endif +#include <mach/soc.h> diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c new file mode 100644 index 00000000000..6431b0f862c --- /dev/null +++ b/arch/arm/mach-omap1/sram-init.c @@ -0,0 +1,76 @@ +/* + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "sram.h" + +#define OMAP1_SRAM_PA 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_and_map_sram(void) +{ + unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ; + unsigned long omap_sram_start = OMAP1_SRAM_PA; + unsigned long omap_sram_size; + + if (cpu_is_omap7xx()) + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ + else if (cpu_is_omap1610() || cpu_is_omap1611() || + cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; /* 16K */ + else { + pr_err("Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, 1); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + BUG_ON(!_omap_sram_reprogram_clock); + /* On 730, bit 13 must always be 1 */ + if (cpu_is_omap7xx()) + ckctl |= 0x2000; + _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +int __init omap_sram_init(void) +{ + omap_detect_and_map_sram(); + _omap_sram_reprogram_clock = + omap_sram_push(omap1_sram_reprogram_clock, + omap1_sram_reprogram_clock_sz); + + return 0; +} diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h new file mode 100644 index 00000000000..d5a6c836230 --- /dev/null +++ b/arch/arm/mach-omap1/sram.h @@ -0,0 +1,7 @@ +#include <plat/sram.h> + +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 74529549130..89368195bf0 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -50,6 +50,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include <plat/counter-32k.h> #include <plat/dmtimer.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 84267edd942..104fed366b8 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -301,7 +301,7 @@ static inline void otg_device_init(struct omap_usb_config *pdata) #endif -u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) +static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; @@ -409,7 +409,7 @@ u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) return syscon1 << 16; } -u32 __init omap1_usb1_init(unsigned nwires) +static u32 __init omap1_usb1_init(unsigned nwires) { u32 syscon1 = 0; @@ -475,7 +475,7 @@ bad: return syscon1 << 20; } -u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) { u32 syscon1 = 0; diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ae87a3ea53a..c94d495b8d9 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -5,7 +5,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ - omap_device.o + omap_device.o sram.o omap-2-3-common = irq.o hwmod-common = omap_hwmod.o \ @@ -75,6 +75,7 @@ obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o +obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 3fc6d839fb3..d1c01625fe5 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -28,7 +28,6 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index cf9449bde18..a8cad2237a2 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -44,8 +44,6 @@ #include <video/omap-panel-tfp410.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <mach/hardware.h> - #include "common.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index bd11b0aa949..8668c72ee81 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,7 +33,7 @@ #include <asm/mach/map.h> #include <plat-omap/dma-omap.h> -#include "debug-devices.h" +#include <plat/debug-devices.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index 3432f913f74..0d2f14c2dcc 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -25,14 +25,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index c66276b2bf0..a38ebb20972 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -33,8 +33,6 @@ #include <linux/cpufreq.h> #include <linux/slab.h> -#include "../plat-omap/sram.h" - #include "soc.h" #include "clock.h" #include "clock2xxx.h" @@ -42,6 +40,7 @@ #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" const struct prcm_config *curr_prcm_set; const struct prcm_config *rate_table; diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index 5510d92abe6..6cf298e262f 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -21,12 +21,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "clock.h" #include "clock3xxx.h" #include "clock34xx.h" #include "sdrc.h" +#include "sram.h" #define CYCLES_PER_MHZ 1000000 diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index b2dfcd77719..058ce3c0873 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -22,8 +22,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "../plat-omap/common.h" - #include "clockdomain.h" #include "cm.h" #include "cm33xx.h" diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index c925c805969..426fcfcfd82 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -34,8 +34,6 @@ #include <asm/proc-fns.h> -#include "../plat-omap/common.h" - #include "i2c.h" #include "serial.h" @@ -345,5 +343,8 @@ struct omap2_hsmmc_info; extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); extern void omap_reserve(void); +struct omap_hwmod; +extern int omap_dss_reset(struct omap_hwmod *); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index b1926cd7046..e5aba58da5d 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -276,6 +276,9 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) return -ENOMEM; } + if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + d->dev_caps |= HS_CHANNELS_RESERVED; + /* Check the capabilities register for descriptor loading feature */ if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS) dma_common_ch_end = CCDN; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index e3406dce59b..4a964338992 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -14,7 +14,6 @@ #include <linux/string.h> #include <linux/delay.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <linux/platform_data/gpio-omap.h> #include "soc.h" diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index ad55b943108..4e63097e3cd 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -109,6 +109,19 @@ int omap_i2c_reset(struct omap_hwmod *oh) return 0; } +static int __init omap_i2c_nr_ports(void) +{ + int ports = 0; + + if (cpu_is_omap24xx()) + ports = 2; + else if (cpu_is_omap34xx()) + ports = 3; + else if (cpu_is_omap44xx()) + ports = 4; + return ports; +} + static const char name[] = "omap_i2c"; int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, @@ -121,6 +134,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, struct omap_i2c_bus_platform_data *pdata; struct omap_i2c_dev_attr *dev_attr; + if (bus_id > omap_i2c_nr_ports()) + return -EINVAL; + omap2_i2c_mux_pins(bus_id); l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h index 81dbb992a6b..42b6f2e7d19 100644 --- a/arch/arm/mach-omap2/i2c.h +++ b/arch/arm/mach-omap2/i2c.h @@ -19,7 +19,7 @@ * */ -#include "../plat-omap/i2c.h" +#include <plat/i2c.h> #ifndef __MACH_OMAP2_I2C_H #define __MACH_OMAP2_I2C_H diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 4b5cbdfac02..cfaed13d004 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include <linux/serial_reg.h> -#include <../mach-omap2/serial.h> +#include <mach/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h deleted file mode 100644 index 5621cc59c9f..00000000000 --- a/arch/arm/mach-omap2/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/gpio.h - */ diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h new file mode 100644 index 00000000000..70eda00db7a --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/serial.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO_OFS 0x3ffc + +/* OMAP2 serial ports */ +#define OMAP2_UART1_BASE 0x4806a000 +#define OMAP2_UART2_BASE 0x4806c000 +#define OMAP2_UART3_BASE 0x4806e000 + +/* OMAP3 serial ports */ +#define OMAP3_UART1_BASE OMAP2_UART1_BASE +#define OMAP3_UART2_BASE OMAP2_UART2_BASE +#define OMAP3_UART3_BASE 0x49020000 +#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ +#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ + +/* OMAP4 serial ports */ +#define OMAP4_UART1_BASE OMAP2_UART1_BASE +#define OMAP4_UART2_BASE OMAP2_UART2_BASE +#define OMAP4_UART3_BASE 0x48020000 +#define OMAP4_UART4_BASE 0x4806e000 + +/* TI81XX serial ports */ +#define TI81XX_UART1_BASE 0x48020000 +#define TI81XX_UART2_BASE 0x48022000 +#define TI81XX_UART3_BASE 0x48024000 + +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + +/* AM33XX serial port */ +#define AM33XX_UART1_BASE 0x44E09000 + +/* OMAP5 serial ports */ +#define OMAP5_UART1_BASE OMAP2_UART1_BASE +#define OMAP5_UART2_BASE OMAP2_UART2_BASE +#define OMAP5_UART3_BASE OMAP4_UART3_BASE +#define OMAP5_UART4_BASE OMAP4_UART4_BASE +#define OMAP5_UART5_BASE 0x48066000 +#define OMAP5_UART6_BASE 0x48068000 + +/* External port on Zoom2/3 */ +#define ZOOM_UART_BASE 0x10000000 +#define ZOOM_UART_VIRT 0xfa400000 + +#define OMAP_PORT_SHIFT 2 +#define ZOOM_PORT_SHIFT 1 + +#define OMAP24XX_BASE_BAUD (48000000/16) + +/* + * DEBUG_LL port encoding stored into the UART1 scratchpad register by + * decomp_setup in uncompress.h + */ +#define OMAP2UART1 21 +#define OMAP2UART2 22 +#define OMAP2UART3 23 +#define OMAP3UART1 OMAP2UART1 +#define OMAP3UART2 OMAP2UART2 +#define OMAP3UART3 33 +#define OMAP3UART4 34 /* Only on 36xx */ +#define OMAP4UART1 OMAP2UART1 +#define OMAP4UART2 OMAP2UART2 +#define OMAP4UART3 43 +#define OMAP4UART4 44 +#define TI81XXUART1 81 +#define TI81XXUART2 82 +#define TI81XXUART3 83 +#define AM33XXUART1 84 +#define OMAP5UART3 OMAP4UART3 +#define OMAP5UART4 OMAP4UART4 +#define ZOOM_UART 95 /* Only on zoom2/3 */ + +#ifndef __ASSEMBLER__ + +struct omap_board_data; +struct omap_uart_port_info; + +extern void omap_serial_init(void); +extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); +extern void omap_serial_init_port(struct omap_board_data *bdata, + struct omap_uart_port_info *platform_data); +#endif diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h index 28d1ec0e869..8e3546d3e04 100644 --- a/arch/arm/mach-omap2/include/mach/uncompress.h +++ b/arch/arm/mach-omap2/include/mach/uncompress.h @@ -23,7 +23,7 @@ #include <asm/memory.h> #include <asm/mach-types.h> -#include <../mach-omap2/serial.h> +#include <mach/serial.h> #define MDR1_MODE_MASK 0x07 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4fadc789557..807b8d919f8 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -27,8 +27,6 @@ #include <plat-omap/dma-omap.h> -#include "../plat-omap/sram.h" - #include "omap_hwmod.h" #include "soc.h" #include "iomap.h" @@ -43,6 +41,7 @@ #include "omap-pm.h" #include "sdrc.h" #include "serial.h" +#include "sram.h" /* * The machine specific code may provide the extra mapping besides the @@ -354,11 +353,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } -static void __init omap_common_init_early(void) -{ - omap_init_consistent_dma_size(); -} - static void __init omap_hwmod_init_postsetup(void) { u8 postsetup_state; @@ -379,7 +373,6 @@ void __init omap2420_init_early(void) { omap2_set_globals_242x(); omap2xxx_check_revision(); - omap_common_init_early(); omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); omap242x_clockdomains_init(); @@ -401,7 +394,6 @@ void __init omap2430_init_early(void) { omap2_set_globals_243x(); omap2xxx_check_revision(); - omap_common_init_early(); omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); omap243x_clockdomains_init(); @@ -428,7 +420,6 @@ void __init omap3_init_early(void) omap2_set_globals_3xxx(); omap3xxx_check_revision(); omap3xxx_check_features(); - omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -462,7 +453,6 @@ void __init ti81xx_init_early(void) omap2_set_globals_ti81xx(); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -520,7 +510,6 @@ void __init am33xx_init_early(void) omap2_set_globals_am33xx(); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); am33xx_voltagedomains_init(); am33xx_powerdomains_init(); am33xx_clockdomains_init(); @@ -536,7 +525,6 @@ void __init omap4430_init_early(void) omap2_set_globals_443x(); omap4xxx_check_revision(); omap4xxx_check_features(); - omap_common_init_early(); omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); @@ -558,7 +546,6 @@ void __init omap5_init_early(void) { omap2_set_globals_5xxx(); omap5xxx_check_revision(); - omap_common_init_early(); } #endif diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c index 198685b894b..6a3be2bebdd 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/mach-omap2/omap-pm-noop.c @@ -22,8 +22,8 @@ #include <linux/device.h> #include <linux/platform_device.h> -#include "../mach-omap2/omap_device.h" -#include "../mach-omap2/omap-pm.h" +#include "omap_device.h" +#include "omap-pm.h" static bool off_mode_enabled; static int dummy_context_loss_counter; diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index d25845c471d..3cfcd41bf8f 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -25,8 +25,6 @@ #include <asm/mach/map.h> #include <asm/memblock.h> -#include "../plat-omap/sram.h" - #include "omap-wakeupgen.h" #include "soc.h" #include "common.h" @@ -34,6 +32,7 @@ #include "hsmmc.h" #include "omap4-sar-layout.h" #include "omap-secure.h" +#include "sram.h" #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 05c6a590655..40d6c93d985 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -12,8 +12,6 @@ #include <plat-omap/dma-omap.h> -#include "../plat-omap/common.h" - #include "omap_hwmod.h" #include "hdq1w.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 5b9be734709..7a6132848f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -30,8 +30,6 @@ #include <plat/dmtimer.h> #include <plat/iommu.h> -#include "../plat-omap/common.h" - #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "cm1_44xx.h" diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 83815ddc478..13e1f430398 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -31,6 +31,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <asm/fncpy.h> + #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> @@ -38,8 +40,6 @@ #include <plat-omap/dma-omap.h> -#include "../plat-omap/sram.h" - #include "soc.h" #include "common.h" #include "clock.h" @@ -48,6 +48,7 @@ #include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" #include "pm.h" #include "control.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2f1ad87c1bb..b16caea312e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -32,6 +32,7 @@ #include <trace/events/power.h> +#include <asm/fncpy.h> #include <asm/suspend.h> #include <asm/system_misc.h> @@ -40,8 +41,6 @@ #include <plat/prcm.h> #include <plat-omap/dma-omap.h> -#include "../plat-omap/sram.h" - #include "soc.h" #include "common.h" #include "cm3xxx.h" @@ -51,6 +50,7 @@ #include "prm3xxx.h" #include "pm.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* pm34xx errata defined in pm.h */ diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index 53ec9cbaa3d..1ac73883f89 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -19,8 +19,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "../plat-omap/common.h" - #include "common.h" #include "powerdomain.h" #include "prm33xx.h" diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 6c595798c5c..945b4ad6ab8 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,7 +24,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> -#include "../plat-omap/common.h" #include <plat/prcm.h> #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 94d4082f87e..c64ee1904be 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -23,8 +23,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "common.h" #include "clock.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 26c1728e09c..90729171464 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,14 +24,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "soc.h" #include "iomap.h" #include "common.h" #include "prm2xxx.h" #include "clock.h" #include "sdrc.h" +#include "sram.h" /* Memory timing, DLL mode flags */ #define M_DDR 1 diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h index 6a6806271fc..c4014f013df 100644 --- a/arch/arm/mach-omap2/serial.h +++ b/arch/arm/mach-omap2/serial.h @@ -1,112 +1 @@ -/* - * arch/arm/plat-omap/include/mach/serial.h - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include <linux/init.h> - -/* - * Memory entry used for the DEBUG_LL UART configuration, relative to - * start of RAM. See also uncompress.h and debug-macro.S. - * - * Note that using a memory location for storing the UART configuration - * has at least two limitations: - * - * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the - * uncompress code could then partially overwrite itself - * 2. We assume printascii is called at least once before paging_init, - * and addruart has a chance to read OMAP_UART_INFO - */ -#define OMAP_UART_INFO_OFS 0x3ffc - -/* OMAP2 serial ports */ -#define OMAP2_UART1_BASE 0x4806a000 -#define OMAP2_UART2_BASE 0x4806c000 -#define OMAP2_UART3_BASE 0x4806e000 - -/* OMAP3 serial ports */ -#define OMAP3_UART1_BASE OMAP2_UART1_BASE -#define OMAP3_UART2_BASE OMAP2_UART2_BASE -#define OMAP3_UART3_BASE 0x49020000 -#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ -#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ - -/* OMAP4 serial ports */ -#define OMAP4_UART1_BASE OMAP2_UART1_BASE -#define OMAP4_UART2_BASE OMAP2_UART2_BASE -#define OMAP4_UART3_BASE 0x48020000 -#define OMAP4_UART4_BASE 0x4806e000 - -/* TI81XX serial ports */ -#define TI81XX_UART1_BASE 0x48020000 -#define TI81XX_UART2_BASE 0x48022000 -#define TI81XX_UART3_BASE 0x48024000 - -/* AM3505/3517 UART4 */ -#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ - -/* AM33XX serial port */ -#define AM33XX_UART1_BASE 0x44E09000 - -/* OMAP5 serial ports */ -#define OMAP5_UART1_BASE OMAP2_UART1_BASE -#define OMAP5_UART2_BASE OMAP2_UART2_BASE -#define OMAP5_UART3_BASE OMAP4_UART3_BASE -#define OMAP5_UART4_BASE OMAP4_UART4_BASE -#define OMAP5_UART5_BASE 0x48066000 -#define OMAP5_UART6_BASE 0x48068000 - -/* External port on Zoom2/3 */ -#define ZOOM_UART_BASE 0x10000000 -#define ZOOM_UART_VIRT 0xfa400000 - -#define OMAP_PORT_SHIFT 2 -#define ZOOM_PORT_SHIFT 1 - -#define OMAP24XX_BASE_BAUD (48000000/16) - -/* - * DEBUG_LL port encoding stored into the UART1 scratchpad register by - * decomp_setup in uncompress.h - */ -#define OMAP2UART1 21 -#define OMAP2UART2 22 -#define OMAP2UART3 23 -#define OMAP3UART1 OMAP2UART1 -#define OMAP3UART2 OMAP2UART2 -#define OMAP3UART3 33 -#define OMAP3UART4 34 /* Only on 36xx */ -#define OMAP4UART1 OMAP2UART1 -#define OMAP4UART2 OMAP2UART2 -#define OMAP4UART3 43 -#define OMAP4UART4 44 -#define TI81XXUART1 81 -#define TI81XXUART2 82 -#define TI81XXUART3 83 -#define AM33XXUART1 84 -#define OMAP5UART3 OMAP4UART3 -#define OMAP5UART4 OMAP4UART4 -#define ZOOM_UART 95 /* Only on zoom2/3 */ - -#ifndef __ASSEMBLER__ - -struct omap_board_data; -struct omap_uart_port_info; - -extern void omap_serial_init(void); -extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); -extern void omap_serial_init_port(struct omap_board_data *bdata, - struct omap_uart_port_info *platform_data); -#endif - -#endif +#include <mach/serial.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 474dba7263e..d1dedc8195e 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -26,13 +26,12 @@ #include <asm/assembler.h> -#include "../plat-omap/sram.h" - #include "omap34xx.h" #include "iomap.h" #include "cm3xxx.h" #include "prm3xxx.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c new file mode 100644 index 00000000000..0ff0f068bea --- /dev/null +++ b/arch/arm/mach-omap2/sram.c @@ -0,0 +1,305 @@ +/* + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "iomap.h" +#include "prm2xxx_3xxx.h" +#include "sdrc.h" +#include "sram.h" + +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA +#else +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#endif +#define OMAP5_SRAM_PA 0x40300000 + +#define SRAM_BOOTLOADER_SZ 0x00 + +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) + +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) + +#define GP_DEVICE 0x300 + +#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) + +static unsigned long omap_sram_start; +static unsigned long omap_sram_skip; +static unsigned long omap_sram_size; + +/* + * Depending on the target RAMFS firewall setup, the public usable amount of + * SRAM varies. The default accessible size for all device types is 2k. A GP + * device allows ARM11 but not other initiators for full size. This + * functionality seems ok until some nice security API happens. + */ +static int is_sram_locked(void) +{ + if (OMAP2_DEVICE_TYPE_GP == omap_type()) { + /* RAMFW: R/W access to all initiators for all qualifier sets */ + if (cpu_is_omap242x()) { + __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ + } + if (cpu_is_omap34xx()) { + __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ + __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); + __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); + } + return 0; + } else + return 1; /* assume locked with no PPA or security driver */ +} + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_sram(void) +{ + omap_sram_skip = SRAM_BOOTLOADER_SZ; + if (is_sram_locked()) { + if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PUB_PA; + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; + } else { + omap_sram_size = 0x8000; /* 32K */ + } + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PUB_PA; + omap_sram_size = 0x800; /* 2K */ + } + } else { + if (soc_is_am33xx()) { + omap_sram_start = AM33XX_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PA; + omap_sram_size = 0xe000; /* 56K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PA; + if (cpu_is_omap242x()) + omap_sram_size = 0xa0000; /* 640K */ + else if (cpu_is_omap243x()) + omap_sram_size = 0x10000; /* 64K */ + } + } +} + +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +static void __init omap2_map_sram(void) +{ + int cached = 1; + +#ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { + omap_sram_start += PAGE_SIZE; + omap_sram_size -= SZ_16K; + } +#endif + if (cpu_is_omap34xx()) { + /* + * SRAM must be marked as non-cached on OMAP3 since the + * CORE DPLL M2 divider change code (in SRAM) runs with the + * SDRAM controller disabled, and if it is marked cached, + * the ARM may attempt to write cache lines back to SDRAM + * which will cause the system to hang. + */ + cached = 0; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, cached); +} + +static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); + +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ + BUG_ON(!_omap2_sram_ddr_init); + _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); +} + +static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, + u32 mem_type); + +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) +{ + BUG_ON(!_omap2_sram_reprogram_sdrc); + _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); +} + +static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) +{ + BUG_ON(!_omap2_set_prcm); + return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); +} + +#ifdef CONFIG_SOC_OMAP2420 +static int __init omap242x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, + omap242x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, + omap242x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, + omap242x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap242x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static int __init omap243x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, + omap243x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, + omap243x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, + omap243x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap243x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 + +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) +{ + BUG_ON(!_omap3_sram_configure_core_dpll); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); +} + +void omap3_sram_restore_context(void) +{ + omap_sram_reset(); + + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); + omap_push_sram_idle(); +} + +static inline int omap34xx_sram_init(void) +{ + omap3_sram_restore_context(); + return 0; +} +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +static inline int am33xx_sram_init(void) +{ + return 0; +} + +int __init omap_sram_init(void) +{ + omap_detect_sram(); + omap2_map_sram(); + + if (cpu_is_omap242x()) + omap242x_sram_init(); + else if (cpu_is_omap2430()) + omap243x_sram_init(); + else if (soc_is_am33xx()) + am33xx_sram_init(); + else if (cpu_is_omap34xx()) + omap34xx_sram_init(); + + return 0; +} diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/mach-omap2/sram.h index cefda2e0986..ca7277c2a9e 100644 --- a/arch/arm/plat-omap/sram.h +++ b/arch/arm/mach-omap2/sram.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/sram.h - * * Interface for functions that need to be run in internal SRAM * * This program is free software; you can redistribute it and/or modify @@ -8,26 +6,8 @@ * published by the Free Software Foundation. */ -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - #ifndef __ASSEMBLY__ -#include <asm/fncpy.h> - -int __init omap_sram_init(void); - -extern void *omap_sram_push_address(unsigned long size); - -/* Macro to push a function to the internal SRAM, using the fncpy API */ -#define omap_sram_push(funcp, size) ({ \ - typeof(&(funcp)) _res = NULL; \ - void *_sram_address = omap_sram_push_address(size); \ - if (_sram_address) \ - _res = fncpy(_sram_address, &(funcp), size); \ - _res; \ -}) - -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); +#include <plat/sram.h> extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock); @@ -44,9 +24,6 @@ extern u32 omap3_configure_core_dpll( extern void omap3_sram_restore_context(void); /* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); extern unsigned long omap24xx_sram_reprogram_clock_sz; @@ -104,4 +81,3 @@ static inline void omap_push_sram_idle(void) {} #define OMAP4_SRAM_PA 0x40300000 #endif #define AM33XX_SRAM_PA 0x40300000 -#endif diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 565e5755c9b..c5bc2cb4d8d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -45,6 +45,7 @@ #include <asm/arch_timer.h> #include "omap_hwmod.h" #include "omap_device.h" +#include <plat/counter-32k.h> #include <plat/dmtimer.h> #include "omap-pm.h" @@ -559,6 +560,8 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) if (timer_dev_attr) pdata->timer_capability = timer_dev_attr->timer_capability; + pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; + pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), NULL, 0, 0); diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 4bd0ace20e9..8d885848600 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o dma.o fb.o counter_32k.o +obj-y := sram.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- := @@ -19,4 +19,3 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c deleted file mode 100644 index a1555e02812..00000000000 --- a/arch/arm/plat-omap/common.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/arch/arm/plat-omap/common.c - * - * Code common to all OMAP machines. - * The file is created by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/dma-mapping.h> - -#include "common.h" -#include <plat-omap/dma-omap.h> - -void __init omap_init_consistent_dma_size(void) -{ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); -#endif -} diff --git a/arch/arm/plat-omap/common.h b/arch/arm/plat-omap/common.h deleted file mode 100644 index 8ae0542a37d..00000000000 --- a/arch/arm/plat-omap/common.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Header for shared OMAP code in plat-omap. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -extern int __init omap_init_clocksource_32k(void __iomem *vbase); - -extern void __init omap_check_revision(void); - -extern void omap_reserve(void); -struct omap_hwmod; -extern int omap_dss_reset(struct omap_hwmod *); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 66bf3f9324f..f3771cdb983 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,8 +22,6 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include "common.h" - /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ #define OMAP2_32KSYNCNT_REV_OFF 0x0 #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 5a4678edd65..a609e216181 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -15,8 +15,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <mach/hardware.h> -#include "../mach-omap2/debug-devices.h" +#include <plat/debug-devices.h> /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index feca128bc8e..c43ea21f33b 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -17,16 +17,33 @@ #include <linux/platform_data/gpio-omap.h> #include <linux/slab.h> -#include <mach/hardware.h> #include <asm/mach-types.h> -#include "fpga.h" - /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the * debug board (all green), accessed through FPGA registers. */ +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + static struct h2p2_dbg_fpga __iomem *fpga; static u16 fpga_led_state; diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 49803cc1878..c288b76f8e6 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -38,9 +38,6 @@ #include <plat-omap/dma-omap.h> -#include "../mach-omap1/soc.h" -#include "../mach-omap2/soc.h" - /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA * channels that an instance of the SDMA IP block can support. Used @@ -182,7 +179,7 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) unsigned long reg; u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { switch (dst_port) { case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ reg = OMAP_TC_OCPT1_PRIOR; @@ -234,7 +231,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, l |= data_type; p->dma_write(l, CSDP, lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 ccr; ccr = p->dma_read(CCR, lch); @@ -250,7 +247,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, p->dma_write(ccr, CCR2, lch); } - if (cpu_class_is_omap2() && dma_trigger) { + if (dma_omap2plus() && dma_trigger) { u32 val; val = p->dma_read(CCR, lch); @@ -290,7 +287,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { BUG_ON(omap_dma_in_1510_mode()); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CCR2, lch); @@ -320,7 +317,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) p->dma_write(w, LCH_CTRL, lch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 val; val = p->dma_read(CCR, lch); @@ -348,7 +345,7 @@ EXPORT_SYMBOL(omap_set_dma_color_mode); void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) { - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 csdp; csdp = p->dma_read(CSDP, lch); @@ -361,7 +358,7 @@ EXPORT_SYMBOL(omap_set_dma_write_mode); void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) { - if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { + if (dma_omap1() && !dma_omap15xx()) { u32 l; l = p->dma_read(LCH_CTRL, lch); @@ -379,7 +376,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CSDP, lch); @@ -421,7 +418,7 @@ EXPORT_SYMBOL(omap_set_dma_params); void omap_set_dma_src_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CSEI, lch); @@ -453,13 +450,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x2; break; } @@ -469,7 +466,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) * fall through */ case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -493,7 +490,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { l = p->dma_read(CSDP, lch); l &= ~(0x1f << 9); l |= dest_port << 9; @@ -514,7 +511,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_params); void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CDEI, lch); @@ -546,19 +543,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x2; else burst = 0x3; break; case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -579,7 +576,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -593,7 +590,7 @@ static inline void omap_disable_channel_irq(int lch) /* disable channel interrupts */ p->dma_write(0, CICR, lch); /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -617,7 +614,7 @@ static inline void enable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); - if (cpu_class_is_omap1()) + if (dma_omap1()) l &= ~(1 << 14); /* Set the ENABLE_LNK bits */ @@ -625,7 +622,7 @@ static inline void enable_lnk(int lch) l = dma_chan[lch].next_lch | (1 << 15); #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) + if (dma_omap2plus()) if (dma_chan[lch].next_linked_ch != -1) l = dma_chan[lch].next_linked_ch | (1 << 15); #endif @@ -642,12 +639,12 @@ static inline void disable_lnk(int lch) /* Disable interrupts */ omap_disable_channel_irq(lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* Set the STOP_LNK bit */ l |= 1 << 14; } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -661,7 +658,7 @@ static inline void omap2_enable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -679,7 +676,7 @@ static inline void omap2_disable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -718,7 +715,7 @@ int omap_request_dma(int dev_id, const char *dev_name, if (p->clear_lch_regs) p->clear_lch_regs(free_ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(free_ch); spin_unlock_irqrestore(&dma_chan_lock, flags); @@ -729,7 +726,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->flags = 0; #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { chan->chain_id = -1; chan->next_linked_ch = -1; } @@ -737,13 +734,13 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - if (cpu_class_is_omap1()) + if (dma_omap1()) chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; - else if (cpu_class_is_omap2()) + else if (dma_omap2plus()) chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | OMAP2_DMA_TRANS_ERR_IRQ; - if (cpu_is_omap16xx()) { + if (dma_omap16xx()) { /* If the sync device is set, configure it dynamically. */ if (dev_id != 0) { set_gdma_dev(free_ch + 1, dev_id); @@ -754,11 +751,11 @@ int omap_request_dma(int dev_id, const char *dev_name, * id. */ p->dma_write(dev_id | (1 << 10), CCR, free_ch); - } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) { + } else if (dma_omap1()) { p->dma_write(dev_id, CCR, free_ch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { omap_enable_channel_irq(free_ch); omap2_enable_irq_lch(free_ch); } @@ -780,7 +777,7 @@ void omap_free_dma(int lch) } /* Disable interrupt for logical channel */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(lch); /* Disable all DMA interrupts for the channel. */ @@ -790,7 +787,7 @@ void omap_free_dma(int lch) p->dma_write(0, CCR, lch); /* Clear registers */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(lch); spin_lock_irqsave(&dma_chan_lock, flags); @@ -816,7 +813,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) { u32 reg; - if (!cpu_class_is_omap2()) { + if (dma_omap1()) { printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); return; } @@ -855,7 +852,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio, } l = p->dma_read(CCR, lch); l &= ~((1 << 6) | (1 << 26)); - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); else l |= ((read_prio & 0x1) << 6); @@ -888,7 +885,7 @@ void omap_start_dma(int lch) * The CPC/CDAC register needs to be initialized to zero * before starting dma transfer. */ - if (cpu_is_omap15xx()) + if (dma_omap15xx()) p->dma_write(0, CPC, lch); else p->dma_write(0, CDAC, lch); @@ -1051,7 +1048,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CSAC, lch); @@ -1059,7 +1056,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0) offset = p->dma_read(CSAC, lch); - if (!cpu_is_omap15xx()) { + if (!dma_omap15xx()) { /* * CDAC == 0 indicates that the DMA transfer on the channel has * not been started (no data has been transferred so far). @@ -1071,7 +1068,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) offset = p->dma_read(CSSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); return offset; @@ -1090,7 +1087,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CDAC, lch); @@ -1099,7 +1096,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is * read before the DMA controller finished disabling the channel. */ - if (!cpu_is_omap15xx() && offset == 0) { + if (!dma_omap15xx() && offset == 0) { offset = p->dma_read(CDAC, lch); /* * CDAC == 0 indicates that the DMA transfer on the channel has @@ -1110,7 +1107,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) offset = p->dma_read(CDSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); return offset; @@ -1127,7 +1124,7 @@ int omap_dma_running(void) { int lch; - if (cpu_class_is_omap1()) + if (dma_omap1()) if (omap_lcd_dma_running()) return 1; @@ -2030,7 +2027,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) dma_chan = d->chan; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * dma_lch_count, GFP_KERNEL); if (!dma_linked_lch) { @@ -2042,7 +2039,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { omap_clear_dma(ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(ch); dma_chan[ch].dev_id = -1; @@ -2051,7 +2048,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) if (ch >= 6 && enable_1510_mode) continue; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* * request_irq() doesn't like dev_id (ie. ch) being * zero, so we have to kludge around this. @@ -2076,11 +2073,11 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0); - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); if (dma_irq < 0) { @@ -2095,9 +2092,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - /* reserve dma channels 0 and 1 in high security devices */ - if (cpu_is_omap34xx() && - (omap_type() != OMAP2_DEVICE_TYPE_GP)) { + /* reserve dma channels 0 and 1 in high security devices on 34xx */ + if (d->dev_caps & HS_CHANNELS_RESERVED) { pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n"); dma_chan[0].dev_id = 0; dma_chan[1].dev_id = 1; @@ -2124,7 +2120,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev) { int dma_irq; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { char irq_name[4]; strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 4a0b30a4ebd..82231a75abd 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -43,10 +43,6 @@ #include <plat/dmtimer.h> -#include <mach/hardware.h> - -#include "../mach-omap2/omap-pm.h" - static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); @@ -272,7 +268,7 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer) EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq); #if defined(CONFIG_ARCH_OMAP1) - +#include <mach/hardware.h> /** * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR * @inputmask: current value of idlect mask @@ -349,7 +345,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -378,9 +375,11 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); - if (!(timer->capability & OMAP_TIMER_ALWON)) - timer->ctx_loss_count = - omap_pm_get_dev_context_loss_count(&timer->pdev->dev); + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (timer->get_context_loss_count) + timer->ctx_loss_count = + timer->get_context_loss_count(&timer->pdev->dev); + } /* * Since the register values are computed and written within @@ -496,7 +495,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -730,6 +730,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->pdev = pdev; timer->capability = pdata->timer_capability; + timer->get_context_loss_count = pdata->get_context_loss_count; /* Skip pm_runtime_enable for OMAP1 */ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index f868caeedfd..3a77b30f53d 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -30,7 +30,6 @@ #include <linux/io.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach/map.h> #include <plat/cpu.h> diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index be6deb7c12e..f9df624d108 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -31,34 +31,13 @@ #include <linux/err.h> #include <linux/clk.h> -#include <mach/irqs.h> - -#include "../mach-omap1/soc.h" -#include "../mach-omap2/soc.h" - -#include "i2c.h" +#include <plat/i2c.h> #define OMAP_I2C_MAX_CONTROLLERS 4 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static int __init omap_i2c_nr_ports(void) -{ - int ports = 0; - - if (cpu_class_is_omap1()) - ports = 1; - else if (cpu_is_omap24xx()) - ports = 2; - else if (cpu_is_omap34xx()) - ports = 3; - else if (cpu_is_omap44xx()) - ports = 4; - - return ports; -} - /** * omap_i2c_bus_setup - Process command line options for the I2C bus speed * @str: String of options @@ -72,12 +51,11 @@ static int __init omap_i2c_nr_ports(void) */ static int __init omap_i2c_bus_setup(char *str) { - int ports; int ints[3]; - ports = omap_i2c_nr_ports(); get_options(str, 3, ints); - if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports) + if (ints[0] < 2 || ints[1] < 1 || + ints[1] > OMAP_I2C_MAX_CONTROLLERS) return 0; i2c_pdata[ints[1] - 1].clkrate = ints[2]; i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP; @@ -122,7 +100,7 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, { int err; - BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports()); + BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS); if (info) { err = i2c_register_board_info(bus_id, info, len); diff --git a/arch/arm/plat-omap/include/plat-omap/dma-omap.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h index 222be7e934e..6f506ba9e45 100644 --- a/arch/arm/plat-omap/include/plat-omap/dma-omap.h +++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h @@ -130,10 +130,12 @@ #define SRC_PORT BIT(0x7) #define DST_PORT BIT(0x8) #define SRC_INDEX BIT(0x9) -#define DST_INDEX BIT(0xA) -#define IS_BURST_ONLY4 BIT(0xB) -#define CLEAR_CSR_ON_READ BIT(0xC) -#define IS_WORD_16 BIT(0xD) +#define DST_INDEX BIT(0xa) +#define IS_BURST_ONLY4 BIT(0xb) +#define CLEAR_CSR_ON_READ BIT(0xc) +#define IS_WORD_16 BIT(0xd) +#define ENABLE_16XX_MODE BIT(0xe) +#define HS_CHANNELS_RESERVED BIT(0xf) /* Defines for DMA Capabilities */ #define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) @@ -270,7 +272,15 @@ struct omap_system_dma_plat_info { u32 (*dma_read)(int reg, int lch); }; -extern void __init omap_init_consistent_dma_size(void); +#ifdef CONFIG_ARCH_OMAP2PLUS +#define dma_omap2plus() 1 +#else +#define dma_omap2plus() 0 +#endif +#define dma_omap1() (!dma_omap2plus()) +#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE))) +#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE))) + extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (*callback)(int lch, u16 ch_status, void *data), diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h new file mode 100644 index 00000000000..da000d482ff --- /dev/null +++ b/arch/arm/plat-omap/include/plat/counter-32k.h @@ -0,0 +1 @@ +int omap_init_clocksource_32k(void __iomem *vbase); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index ba542ec8d51..b4516aba67e 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -29,7 +29,7 @@ #define __ASM_ARCH_OMAP_CPU_H #ifdef CONFIG_ARCH_OMAP1 -#include "../../mach-omap1/soc.h" +#include <mach/soc.h> #endif #ifdef CONFIG_ARCH_OMAP2PLUS diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h index a4edbd2f748..8fc4287222d 100644 --- a/arch/arm/mach-omap2/debug-devices.h +++ b/arch/arm/plat-omap/include/plat/debug-devices.h @@ -1,9 +1,2 @@ -#ifndef _OMAP_DEBUG_DEVICES_H -#define _OMAP_DEBUG_DEVICES_H - -#include <linux/types.h> - /* for TI reference platforms sharing the same debug card */ extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 85868e98c11..3f5b9cfd9c0 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -94,6 +94,7 @@ struct dmtimer_platform_data { /* set_timer_src - Only used for OMAP1 devices */ int (*set_timer_src)(struct platform_device *pdev, int source); u32 timer_capability; + int (*get_context_loss_count)(struct device *); }; int omap_dm_timer_reserve_systimer(int id); @@ -263,6 +264,7 @@ struct omap_dm_timer { unsigned reserved:1; unsigned posted:1; struct timer_regs context; + int (*get_context_loss_count)(struct device *); int ctx_loss_count; int revision; u32 capability; diff --git a/arch/arm/plat-omap/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 7a9028cb5a7..7a9028cb5a7 100644 --- a/arch/arm/plat-omap/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h new file mode 100644 index 00000000000..ba4525059a9 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -0,0 +1,16 @@ +int omap_sram_init(void); + +void omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached); +void omap_sram_reset(void); + +extern void *omap_sram_push_address(unsigned long size); + +/* Macro to push a function to the internal SRAM, using the fncpy API */ +#define omap_sram_push(funcp, size) ({ \ + typeof(&(funcp)) _res = NULL; \ + void *_sram_address = omap_sram_push_address(size); \ + if (_sram_address) \ + _res = fncpy(_sram_address, &(funcp), size); \ + _res; \ +}) diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 70dcc225157..743fc2836f7 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -20,198 +20,20 @@ #include <linux/init.h> #include <linux/io.h> +#include <asm/fncpy.h> #include <asm/tlb.h> #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include "../mach-omap1/soc.h" -#include "../mach-omap2/soc.h" - -#include "sram.h" - -/* XXX These "sideways" includes will disappear when sram.c becomes a driver */ -#include "../mach-omap2/iomap.h" -#include "../mach-omap2/prm2xxx_3xxx.h" -#include "../mach-omap2/sdrc.h" - -#define OMAP1_SRAM_PA 0x20000000 -#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) -#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA -#else -#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) -#endif -#define OMAP5_SRAM_PA 0x40300000 - -#if defined(CONFIG_ARCH_OMAP2PLUS) -#define SRAM_BOOTLOADER_SZ 0x00 -#else -#define SRAM_BOOTLOADER_SZ 0x80 -#endif - -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) - -#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) - -#define GP_DEVICE 0x300 - #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) -static unsigned long omap_sram_start; static void __iomem *omap_sram_base; static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; /* - * Depending on the target RAMFS firewall setup, the public usable amount of - * SRAM varies. The default accessible size for all device types is 2k. A GP - * device allows ARM11 but not other initiators for full size. This - * functionality seems ok until some nice security API happens. - */ -static int is_sram_locked(void) -{ - if (OMAP2_DEVICE_TYPE_GP == omap_type()) { - /* RAMFW: R/W access to all initiators for all qualifier sets */ - if (cpu_is_omap242x()) { - __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ - } - if (cpu_is_omap34xx()) { - __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ - __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); - __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); - } - return 0; - } else - return 1; /* assume locked with no PPA or security driver */ -} - -/* - * The amount of SRAM depends on the core type. - * Note that we cannot try to test for SRAM here because writes - * to secure SRAM will hang the system. Also the SRAM is not - * yet mapped at this point. - */ -static void __init omap_detect_sram(void) -{ - omap_sram_skip = SRAM_BOOTLOADER_SZ; - if (cpu_class_is_omap2()) { - if (is_sram_locked()) { - if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PUB_PA; - if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || - (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { - omap_sram_size = 0x7000; /* 28K */ - omap_sram_skip += SZ_16K; - } else { - omap_sram_size = 0x8000; /* 32K */ - } - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PUB_PA; - omap_sram_size = 0xa000; /* 40K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PUB_PA; - omap_sram_size = 0x800; /* 2K */ - } - } else { - if (soc_is_am33xx()) { - omap_sram_start = AM33XX_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0xe000; /* 56K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PA; - if (cpu_is_omap242x()) - omap_sram_size = 0xa0000; /* 640K */ - else if (cpu_is_omap243x()) - omap_sram_size = 0x10000; /* 64K */ - } - } - } else { - omap_sram_start = OMAP1_SRAM_PA; - - if (cpu_is_omap7xx()) - omap_sram_size = 0x32000; /* 200K */ - else if (cpu_is_omap15xx()) - omap_sram_size = 0x30000; /* 192K */ - else if (cpu_is_omap1610() || cpu_is_omap1611() || - cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; /* 16K */ - else { - pr_err("Could not detect SRAM size\n"); - omap_sram_size = 0x4000; - } - } -} - -/* - * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. - */ -static void __init omap_map_sram(void) -{ - int cached = 1; - - if (omap_sram_size == 0) - return; - -#ifdef CONFIG_OMAP4_ERRATA_I688 - if (cpu_is_omap44xx()) { - omap_sram_start += PAGE_SIZE; - omap_sram_size -= SZ_16K; - } -#endif - if (cpu_is_omap34xx()) { - /* - * SRAM must be marked as non-cached on OMAP3 since the - * CORE DPLL M2 divider change code (in SRAM) runs with the - * SDRAM controller disabled, and if it is marked cached, - * the ARM may attempt to write cache lines back to SDRAM - * which will cause the system to hang. - */ - cached = 0; - } - - omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); - omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, - cached); - if (!omap_sram_base) { - pr_err("SRAM: Could not map\n"); - return; - } - - omap_sram_ceil = omap_sram_base + omap_sram_size; - - /* - * Looks like we need to preserve some bootloader code at the - * beginning of SRAM for jumping to flash for reboot to work... - */ - memset_io(omap_sram_base + omap_sram_skip, 0, - omap_sram_size - omap_sram_skip); -} - -/* * Memory allocator for SRAM: calculates the new ceiling address * for pushing a function using the fncpy API. * @@ -236,171 +58,39 @@ void *omap_sram_push_address(unsigned long size) return (void *)omap_sram_ceil; } -#ifdef CONFIG_ARCH_OMAP1 - -static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); - -void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) -{ - BUG_ON(!_omap_sram_reprogram_clock); - /* On 730, bit 13 must always be 1 */ - if (cpu_is_omap7xx()) - ckctl |= 0x2000; - _omap_sram_reprogram_clock(dpllctl, ckctl); -} - -static int __init omap1_sram_init(void) -{ - _omap_sram_reprogram_clock = - omap_sram_push(omap1_sram_reprogram_clock, - omap1_sram_reprogram_clock_sz); - - return 0; -} - -#else -#define omap1_sram_init() do {} while (0) -#endif - -#if defined(CONFIG_ARCH_OMAP2) - -static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); - -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock) -{ - BUG_ON(!_omap2_sram_ddr_init); - _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, - base_cs, force_unlock); -} - -static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, - u32 mem_type); - -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) -{ - BUG_ON(!_omap2_sram_reprogram_sdrc); - _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); -} - -static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) -{ - BUG_ON(!_omap2_set_prcm); - return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); -} -#endif - -#ifdef CONFIG_SOC_OMAP2420 -static int __init omap242x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, - omap242x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, - omap242x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, - omap242x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap242x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -static int __init omap243x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, - omap243x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, - omap243x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, - omap243x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap243x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 - -static u32 (*_omap3_sram_configure_core_dpll)( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) -{ - BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll( - m2, unlock_dll, f, inc, - sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, - sdrc_actim_ctrl_b_0, sdrc_mr_0, - sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, - sdrc_actim_ctrl_b_1, sdrc_mr_1); -} - -void omap3_sram_restore_context(void) +/* + * The SRAM context is lost during off-idle and stack + * needs to be reset. + */ +void omap_sram_reset(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; - - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); - omap_push_sram_idle(); } -static inline int omap34xx_sram_init(void) -{ - omap3_sram_restore_context(); - return 0; -} -#else -static inline int omap34xx_sram_init(void) -{ - return 0; -} -#endif /* CONFIG_ARCH_OMAP3 */ - -static inline int am33xx_sram_init(void) +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +void __init omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached) { - return 0; -} + if (size == 0) + return; -int __init omap_sram_init(void) -{ - omap_detect_sram(); - omap_map_sram(); + start = ROUND_DOWN(start, PAGE_SIZE); + omap_sram_size = size; + omap_sram_skip = skip; + omap_sram_base = __arm_ioremap_exec(start, size, cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } - if (!(cpu_class_is_omap2())) - omap1_sram_init(); - else if (cpu_is_omap242x()) - omap242x_sram_init(); - else if (cpu_is_omap2430()) - omap243x_sram_init(); - else if (soc_is_am33xx()) - am33xx_sram_init(); - else if (cpu_is_omap34xx()) - omap34xx_sram_init(); + omap_sram_reset(); - return 0; + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index 56d925312a5..7d35c237fbf 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -21,12 +21,6 @@ #include <plat-omap/dma-omap.h> -#ifdef CONFIG_ARCH_OMAP2PLUS -#define dma_omap2plus() 1 -#else -#define dma_omap2plus() 0 -#endif - struct omap_dmadev { struct dma_device ddev; spinlock_t lock; diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index a0b737fecf1..5bd40e6870c 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -36,7 +36,6 @@ #include <media/v4l2-ioctl.h> #include <plat/iommu.h> #include <plat/iovmm.h> -#include <plat/omap-pm.h> #include "ispvideo.h" #include "isp.h" diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index e8741c2678d..5d50b25a73d 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -26,7 +26,6 @@ #include <linux/io.h> #include <linux/platform_device.h> -#include <mach/irqs.h> #define OMAP1_MPUIO_BASE 0xfffb5000 diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c index fad350682ca..c1900b2a6f2 100644 --- a/sound/soc/omap/am3517evm.c +++ b/sound/soc/omap/am3517evm.c @@ -25,8 +25,6 @@ #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include "omap-mcbsp.h" diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 521bfc3d2b2..230b8c14484 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -29,7 +29,6 @@ #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <linux/gpio.h> #include <linux/module.h> #include <linux/platform_data/asoc-ti-mcbsp.h> diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c index 3960e8df9c7..06ef8d67ed1 100644 --- a/sound/soc/omap/osk5912.c +++ b/sound/soc/omap/osk5912.c @@ -28,7 +28,6 @@ #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <linux/gpio.h> #include <linux/module.h> #include <linux/platform_data/asoc-ti-mcbsp.h> diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index 597cae769ce..b462a2c9385 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -31,8 +31,6 @@ #include <sound/jack.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/asoc-ti-mcbsp.h> diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c index 677b567935f..27c501c301b 100644 --- a/sound/soc/omap/zoom2.c +++ b/sound/soc/omap/zoom2.c @@ -26,9 +26,6 @@ #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> -#include <mach/board-zoom.h> #include <linux/platform_data/asoc-ti-mcbsp.h> /* Register descriptions for twl4030 codec part */ |