diff options
| -rw-r--r-- | drivers/pinctrl/pinctrl-abx500.c | 30 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-lantiq.c | 3 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-single.c | 3 | ||||
| -rw-r--r-- | drivers/pinctrl/vt8500/pinctrl-wm8750.c | 2 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 12 |
5 files changed, 25 insertions, 25 deletions
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index aa17f7580f6..6d4532702f8 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -851,23 +851,12 @@ static int abx500_gpio_probe(struct platform_device *pdev) if (abx500_pdata) pdata = abx500_pdata->gpio; - if (!pdata) { - if (np) { - const struct of_device_id *match; - match = of_match_device(abx500_gpio_match, &pdev->dev); - if (!match) - return -ENODEV; - id = (unsigned long)match->data; - } else { - dev_err(&pdev->dev, "gpio dt and platform data missing\n"); - return -ENODEV; - } + if (!(pdata || np)) { + dev_err(&pdev->dev, "gpio dt and platform data missing\n"); + return -ENODEV; } - if (platid) - id = platid->driver_data; - pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl), GFP_KERNEL); if (pct == NULL) { @@ -882,6 +871,16 @@ static int abx500_gpio_probe(struct platform_device *pdev) pct->chip.dev = &pdev->dev; pct->chip.base = (np) ? -1 : pdata->gpio_base; + if (platid) + id = platid->driver_data; + else if (np) { + const struct of_device_id *match; + + match = of_match_device(abx500_gpio_match, &pdev->dev); + if (match) + id = (unsigned long)match->data; + } + /* initialize the lock */ mutex_init(&pct->lock); @@ -900,8 +899,7 @@ static int abx500_gpio_probe(struct platform_device *pdev) abx500_pinctrl_ab8505_init(&pct->soc); break; default: - dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", - (int) platid->driver_data); + dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", id); mutex_destroy(&pct->lock); return -EINVAL; } diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c index 615c5002b75..d22ca252b80 100644 --- a/drivers/pinctrl/pinctrl-lantiq.c +++ b/drivers/pinctrl/pinctrl-lantiq.c @@ -52,7 +52,8 @@ static void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, int i; for (i = 0; i < num_maps; i++) - if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN || + map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) kfree(map[i].data.configs.configs); kfree(map); } diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index 5f2d2bfd356..b9fa0461860 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -1166,7 +1166,8 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, (*map)->data.mux.function = np->name; if (pcs->is_pinconf) { - if (pcs_parse_pinconf(pcs, np, function, map)) + res = pcs_parse_pinconf(pcs, np, function, map); + if (res) goto free_pingroups; *num_maps = 2; } else { diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8750.c b/drivers/pinctrl/vt8500/pinctrl-wm8750.c index b964cc55056..de43262398d 100644 --- a/drivers/pinctrl/vt8500/pinctrl-wm8750.c +++ b/drivers/pinctrl/vt8500/pinctrl-wm8750.c @@ -53,7 +53,7 @@ static const struct wmt_pinctrl_bank_registers wm8750_banks[] = { #define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) #define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) #define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) -#define WMT_PIN_WAKEUP1 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17) #define WMT_PIN_SD0CD WMT_PIN(0, 28) #define WMT_PIN_VDOUT0 WMT_PIN(1, 0) #define WMT_PIN_VDOUT1 WMT_PIN(1, 1) diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 72474e18f1e..6aa23809662 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -37,17 +37,17 @@ * if it is 0, pull-down is disabled. * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and * low, this is the most typical case and is typically achieved with two - * active transistors on the output. Sending this config will enabale + * active transistors on the output. Setting this config will enable * push-pull mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports - * which are then pulled up with an external resistor. Sending this - * config will enabale open drain mode, the argument is ignored. + * which are then pulled up with an external resistor. Setting this + * config will enable open drain mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source - * (open emitter). Sending this config will enabale open drain mode, the + * (open emitter). Setting this config will enable open drain mode, the * argument is ignored. - * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as - * argument. The argument is in mA. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current + * passed as argument. The argument is in mA. * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, * schmitt-trigger mode is disabled. |