diff options
| -rw-r--r-- | arch/parisc/kernel/hardware.c | 1 | ||||
| -rw-r--r-- | drivers/parisc/iosapic.c | 66 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_gsc.c | 10 |
3 files changed, 76 insertions, 1 deletions
diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index 9e2d2e40852..872275659d9 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -1205,6 +1205,7 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, {HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"}, {HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"}, + {HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"}, {HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"}, {HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"}, {HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"}, diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 9544cdc0d1a..e79e006eb9a 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -811,6 +811,70 @@ int iosapic_fixup_irq(void *isi_obj, struct pci_dev *pcidev) return pcidev->irq; } +static struct iosapic_info *first_isi = NULL; + +#ifdef CONFIG_64BIT +int iosapic_serial_irq(int num) +{ + struct iosapic_info *isi = first_isi; + struct irt_entry *irte = NULL; /* only used if PAT PDC */ + struct vector_info *vi; + int isi_line; /* line used by device */ + + /* lookup IRT entry for isi/slot/pin set */ + irte = &irt_cell[num]; + + DBG_IRT("iosapic_serial_irq(): irte %p %x %x %x %x %x %x %x %x\n", + irte, + irte->entry_type, + irte->entry_length, + irte->polarity_trigger, + irte->src_bus_irq_devno, + irte->src_bus_id, + irte->src_seg_id, + irte->dest_iosapic_intin, + (u32) irte->dest_iosapic_addr); + isi_line = irte->dest_iosapic_intin; + + /* get vector info for this input line */ + vi = isi->isi_vector + isi_line; + DBG_IRT("iosapic_serial_irq: line %d vi 0x%p\n", isi_line, vi); + + /* If this IRQ line has already been setup, skip it */ + if (vi->irte) + goto out; + + vi->irte = irte; + + /* + * Allocate processor IRQ + * + * XXX/FIXME The txn_alloc_irq() code and related code should be + * moved to enable_irq(). That way we only allocate processor IRQ + * bits for devices that actually have drivers claiming them. + * Right now we assign an IRQ to every PCI device present, + * regardless of whether it's used or not. + */ + vi->txn_irq = txn_alloc_irq(8); + + if (vi->txn_irq < 0) + panic("I/O sapic: couldn't get TXN IRQ\n"); + + /* enable_irq() will use txn_* to program IRdT */ + vi->txn_addr = txn_alloc_addr(vi->txn_irq); + vi->txn_data = txn_alloc_data(vi->txn_irq); + + vi->eoi_addr = isi->addr + IOSAPIC_REG_EOI; + vi->eoi_data = cpu_to_le32(vi->txn_data); + + cpu_claim_irq(vi->txn_irq, &iosapic_interrupt_type, vi); + + out: + + return vi->txn_irq; +} +#endif + /* ** squirrel away the I/O Sapic Version @@ -877,6 +941,8 @@ void *iosapic_register(unsigned long hpa) vip->irqline = (unsigned char) cnt; vip->iosapic = isi; } + if (!first_isi) + first_isi = isi; return isi; } diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index 097dff9c08a..bb91b4713eb 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -30,6 +30,12 @@ static int __init serial_init_chip(struct parisc_device *dev) unsigned long address; int err; +#ifdef CONFIG_64BIT + extern int iosapic_serial_irq(int cellnum); + if (!dev->irq && (dev->id.sversion == 0xad)) + dev->irq = iosapic_serial_irq(dev->mod_index-1); +#endif + if (!dev->irq) { /* We find some unattached serial ports by walking native * busses. These should be silently ignored. Otherwise, @@ -51,7 +57,8 @@ static int __init serial_init_chip(struct parisc_device *dev) memset(&uart, 0, sizeof(uart)); uart.port.iotype = UPIO_MEM; /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ - uart.port.uartclk = 7272727; + uart.port.uartclk = (dev->id.sversion != 0xad) ? + 7272727 : 1843200; uart.port.mapbase = address; uart.port.membase = ioremap_nocache(address, 16); uart.port.irq = dev->irq; @@ -73,6 +80,7 @@ static struct parisc_device_id serial_tbl[] = { { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x000ad }, { 0 } }; |