diff options
| -rw-r--r-- | drivers/i2c/busses/i2c-nomadik.c | 90 |
1 files changed, 10 insertions, 80 deletions
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 650293ff4d6..c7e3b0c1a1c 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -148,10 +148,6 @@ struct i2c_nmk_client { * @stop: stop condition. * @xfer_complete: acknowledge completion for a I2C message. * @result: controller propogated result. - * @pinctrl: pinctrl handle. - * @pins_default: default state for the pins. - * @pins_idle: idle state for the pins. - * @pins_sleep: sleep state for the pins. * @busy: Busy doing transfer. */ struct nmk_i2c_dev { @@ -165,11 +161,6 @@ struct nmk_i2c_dev { int stop; struct completion xfer_complete; int result; - /* Three pin states - default, idle & sleep */ - struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; - struct pinctrl_state *pins_idle; - struct pinctrl_state *pins_sleep; bool busy; }; @@ -645,13 +636,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, } /* Optionaly enable pins to be muxed in and configured */ - if (!IS_ERR(dev->pins_default)) { - status = pinctrl_select_state(dev->pinctrl, - dev->pins_default); - if (status) - dev_err(&dev->adev->dev, - "could not set default pins\n"); - } + pinctrl_pm_select_default_state(&dev->adev->dev); status = init_hw(dev); if (status) @@ -681,13 +666,7 @@ out: clk_disable_unprepare(dev->clk); out_clk: /* Optionally let pins go into idle state */ - if (!IS_ERR(dev->pins_idle)) { - status = pinctrl_select_state(dev->pinctrl, - dev->pins_idle); - if (status) - dev_err(&dev->adev->dev, - "could not set pins to idle state\n"); - } + pinctrl_pm_select_idle_state(&dev->adev->dev); pm_runtime_put_sync(&dev->adev->dev); @@ -882,41 +861,22 @@ static int nmk_i2c_suspend(struct device *dev) { struct amba_device *adev = to_amba_device(dev); struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev); - int ret; if (nmk_i2c->busy) return -EBUSY; - if (!IS_ERR(nmk_i2c->pins_sleep)) { - ret = pinctrl_select_state(nmk_i2c->pinctrl, - nmk_i2c->pins_sleep); - if (ret) - dev_err(dev, "could not set pins to sleep state\n"); - } + pinctrl_pm_select_sleep_state(dev); return 0; } static int nmk_i2c_resume(struct device *dev) { - struct amba_device *adev = to_amba_device(dev); - struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev); - int ret; - /* First go to the default state */ - if (!IS_ERR(nmk_i2c->pins_default)) { - ret = pinctrl_select_state(nmk_i2c->pinctrl, - nmk_i2c->pins_default); - if (ret) - dev_err(dev, "could not set pins to default state\n"); - } + pinctrl_pm_select_default_state(dev); /* Then let's idle the pins until the next transfer happens */ - if (!IS_ERR(nmk_i2c->pins_idle)) { - ret = pinctrl_select_state(nmk_i2c->pinctrl, - nmk_i2c->pins_idle); - if (ret) - dev_err(dev, "could not set pins to idle state\n"); - } + pinctrl_pm_select_idle_state(dev); + return 0; } #else @@ -1004,39 +964,10 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) dev->adev = adev; amba_set_drvdata(adev, dev); - dev->pinctrl = devm_pinctrl_get(&adev->dev); - if (IS_ERR(dev->pinctrl)) { - ret = PTR_ERR(dev->pinctrl); - goto err_pinctrl; - } - - dev->pins_default = pinctrl_lookup_state(dev->pinctrl, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(dev->pins_default)) { - dev_err(&adev->dev, "could not get default pinstate\n"); - } else { - ret = pinctrl_select_state(dev->pinctrl, - dev->pins_default); - if (ret) - dev_dbg(&adev->dev, "could not set default pinstate\n"); - } - - dev->pins_idle = pinctrl_lookup_state(dev->pinctrl, - PINCTRL_STATE_IDLE); - if (IS_ERR(dev->pins_idle)) { - dev_dbg(&adev->dev, "could not get idle pinstate\n"); - } else { - /* If possible, let's go to idle until the first transfer */ - ret = pinctrl_select_state(dev->pinctrl, - dev->pins_idle); - if (ret) - dev_dbg(&adev->dev, "could not set idle pinstate\n"); - } - - dev->pins_sleep = pinctrl_lookup_state(dev->pinctrl, - PINCTRL_STATE_SLEEP); - if (IS_ERR(dev->pins_sleep)) - dev_dbg(&adev->dev, "could not get sleep pinstate\n"); + /* Select default pin state */ + pinctrl_pm_select_default_state(&adev->dev); + /* If possible, let's go to idle until the first transfer */ + pinctrl_pm_select_idle_state(&adev->dev); dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); if (!dev->virtbase) { @@ -1106,7 +1037,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) iounmap(dev->virtbase); err_no_ioremap: kfree(dev); - err_pinctrl: err_no_mem: return ret; |