diff options
263 files changed, 8626 insertions, 1973 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index e182992ff79..deae37416ee 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -348,6 +348,13 @@ P: Ian Molton M: spyro@f2s.com S: Maintained +ARM/ATMEL AT91RM9200 ARM ARCHITECTURE +P: Andrew Victor +M: andrew@sanpeople.com +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://maxim.org.za/at91_26.html +S: Maintained + ARM/CORGI MACHINE SUPPORT P: Richard Purdie M: rpurdie@rpsys.net diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d654c4f87d0..8c05d4321ae 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -382,6 +382,14 @@ config PLAT_IOP source arch/arm/mm/Kconfig +config IWMMXT + bool "Enable iWMMXt support" + depends CPU_XSCALE || CPU_XSC3 + default y if PXA27x + help + Enable support for iWMMXt context switching at run time if + running on a CPU that supports it. + # bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER config XSCALE_PMU bool @@ -591,7 +599,7 @@ config LEDS ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ - ARCH_AT91RM9200 || MACH_TRIZEPS4 + ARCH_AT91 || MACH_TRIZEPS4 help If you say Y here, the LEDs on your machine will be used to provide useful information about your current system status. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index d22f38b957d..40c5eb1f55c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -32,10 +32,6 @@ config DEBUG_USER 8 - SIGSEGV faults 16 - SIGBUS faults -config DEBUG_WAITQ - bool "Wait queue debugging" - depends on DEBUG_KERNEL - config DEBUG_ERRORS bool "Verbose kernel error messages" depends on DEBUG_KERNEL diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 5f6f9a58570..000f1100b55 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -15,6 +15,8 @@ CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) OBJCOPYFLAGS :=-O binary -R .note -R .comment -S GZFLAGS :=-9 #CFLAGS +=-pipe +# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: +CFLAGS +=$(call cc-option,-marm,) # Do not use arch/arm/defconfig - it's always outdated. # Select a platform tht is kept up-to-date diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index f3e020f2227..09b9d1b6844 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -160,7 +160,7 @@ void __init gic_dist_init(void __iomem *base) */ for (i = 29; i < max_irq; i++) { set_irq_chip(i, &gic_chip); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 80a72c75214..cfe6f4650bc 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -163,11 +163,11 @@ static struct locomo_dev_info locomo_devices[] = { #define LOCOMO_IRQ_LT_START (IRQ_LOCOMO_LT) #define LOCOMO_IRQ_SPI_START (IRQ_LOCOMO_SPI_RFR) -static void locomo_handler(unsigned int irq, struct irqdesc *desc) +static void locomo_handler(unsigned int irq, struct irq_desc *desc) { int req, i; - struct irqdesc *d; - void __iomem *mapbase = get_irq_chipdata(irq); + struct irq_desc *d; + void __iomem *mapbase = get_irq_chip_data(irq); /* Acknowledge the parent IRQ */ desc->chip->ack(irq); @@ -194,7 +194,7 @@ static void locomo_ack_irq(unsigned int irq) static void locomo_mask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_ICR); r &= ~(0x0010 << (irq - LOCOMO_IRQ_START)); @@ -203,7 +203,7 @@ static void locomo_mask_irq(unsigned int irq) static void locomo_unmask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_ICR); r |= (0x0010 << (irq - LOCOMO_IRQ_START)); @@ -217,10 +217,10 @@ static struct irq_chip locomo_chip = { .unmask = locomo_unmask_irq, }; -static void locomo_key_handler(unsigned int irq, struct irqdesc *desc) +static void locomo_key_handler(unsigned int irq, struct irq_desc *desc) { - struct irqdesc *d; - void __iomem *mapbase = get_irq_chipdata(irq); + struct irq_desc *d; + void __iomem *mapbase = get_irq_chip_data(irq); if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) { d = irq_desc + LOCOMO_IRQ_KEY_START; @@ -230,7 +230,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc) static void locomo_key_ack_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START)); @@ -239,7 +239,7 @@ static void locomo_key_ack_irq(unsigned int irq) static void locomo_key_mask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START)); @@ -248,7 +248,7 @@ static void locomo_key_mask_irq(unsigned int irq) static void locomo_key_unmask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START)); @@ -262,11 +262,11 @@ static struct irq_chip locomo_key_chip = { .unmask = locomo_key_unmask_irq, }; -static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc) +static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc) { int req, i; - struct irqdesc *d; - void __iomem *mapbase = get_irq_chipdata(irq); + struct irq_desc *d; + void __iomem *mapbase = get_irq_chip_data(irq); req = locomo_readl(mapbase + LOCOMO_GIR) & locomo_readl(mapbase + LOCOMO_GPD) & @@ -285,7 +285,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc) static void locomo_gpio_ack_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_GWE); r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); @@ -302,7 +302,7 @@ static void locomo_gpio_ack_irq(unsigned int irq) static void locomo_gpio_mask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_GIE); r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); @@ -311,7 +311,7 @@ static void locomo_gpio_mask_irq(unsigned int irq) static void locomo_gpio_unmask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_GIE); r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); @@ -325,10 +325,10 @@ static struct irq_chip locomo_gpio_chip = { .unmask = locomo_gpio_unmask_irq, }; -static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc) +static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc) { - struct irqdesc *d; - void __iomem *mapbase = get_irq_chipdata(irq); + struct irq_desc *d; + void __iomem *mapbase = get_irq_chip_data(irq); if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) { d = irq_desc + LOCOMO_IRQ_LT_START; @@ -338,7 +338,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc) static void locomo_lt_ack_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_LTINT); r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START)); @@ -347,7 +347,7 @@ static void locomo_lt_ack_irq(unsigned int irq) static void locomo_lt_mask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_LTINT); r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START)); @@ -356,7 +356,7 @@ static void locomo_lt_mask_irq(unsigned int irq) static void locomo_lt_unmask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_LTINT); r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START)); @@ -370,11 +370,11 @@ static struct irq_chip locomo_lt_chip = { .unmask = locomo_lt_unmask_irq, }; -static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc) +static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc) { int req, i; - struct irqdesc *d; - void __iomem *mapbase = get_irq_chipdata(irq); + struct irq_desc *d; + void __iomem *mapbase = get_irq_chip_data(irq); req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F; if (req) { @@ -391,7 +391,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc) static void locomo_spi_ack_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE); r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); @@ -408,7 +408,7 @@ static void locomo_spi_ack_irq(unsigned int irq) static void locomo_spi_mask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE); r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); @@ -417,7 +417,7 @@ static void locomo_spi_mask_irq(unsigned int irq) static void locomo_spi_unmask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE); r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); @@ -440,55 +440,55 @@ static void locomo_setup_irq(struct locomo *lchip) * Install handler for IRQ_LOCOMO_HW. */ set_irq_type(lchip->irq, IRQT_FALLING); - set_irq_chipdata(lchip->irq, irqbase); + set_irq_chip_data(lchip->irq, irqbase); set_irq_chained_handler(lchip->irq, locomo_handler); /* Install handlers for IRQ_LOCOMO_*_BASE */ set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip); - set_irq_chipdata(IRQ_LOCOMO_KEY_BASE, irqbase); + set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase); set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler); set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE); set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip); - set_irq_chipdata(IRQ_LOCOMO_GPIO_BASE, irqbase); + set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase); set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler); set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE); set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip); - set_irq_chipdata(IRQ_LOCOMO_LT_BASE, irqbase); + set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase); set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler); set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE); set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip); - set_irq_chipdata(IRQ_LOCOMO_SPI_BASE, irqbase); + set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase); set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler); set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE); /* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */ set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip); - set_irq_chipdata(LOCOMO_IRQ_KEY_START, irqbase); - set_irq_handler(LOCOMO_IRQ_KEY_START, do_edge_IRQ); + set_irq_chip_data(LOCOMO_IRQ_KEY_START, irqbase); + set_irq_handler(LOCOMO_IRQ_KEY_START, handle_edge_irq); set_irq_flags(LOCOMO_IRQ_KEY_START, IRQF_VALID | IRQF_PROBE); /* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */ for (irq = LOCOMO_IRQ_GPIO_START; irq < LOCOMO_IRQ_GPIO_START + 16; irq++) { set_irq_chip(irq, &locomo_gpio_chip); - set_irq_chipdata(irq, irqbase); - set_irq_handler(irq, do_edge_IRQ); + set_irq_chip_data(irq, irqbase); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } /* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */ set_irq_chip(LOCOMO_IRQ_LT_START, &locomo_lt_chip); - set_irq_chipdata(LOCOMO_IRQ_LT_START, irqbase); - set_irq_handler(LOCOMO_IRQ_LT_START, do_edge_IRQ); + set_irq_chip_data(LOCOMO_IRQ_LT_START, irqbase); + set_irq_handler(LOCOMO_IRQ_LT_START, handle_edge_irq); set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE); /* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */ for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) { set_irq_chip(irq, &locomo_spi_chip); - set_irq_chipdata(irq, irqbase); - set_irq_handler(irq, do_edge_IRQ); + set_irq_chip_data(irq, irqbase); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index d5f72010a6f..fe3f05901a2 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -147,7 +147,7 @@ void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *ho * will call us again if there are more interrupts to process. */ static void -sa1111_irq_handler(unsigned int irq, struct irqdesc *desc) +sa1111_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned int stat0, stat1, i; void __iomem *base = get_irq_data(irq); @@ -187,7 +187,7 @@ static void sa1111_ack_irq(unsigned int irq) static void sa1111_mask_lowirq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ie0; ie0 = sa1111_readl(mapbase + SA1111_INTEN0); @@ -197,7 +197,7 @@ static void sa1111_mask_lowirq(unsigned int irq) static void sa1111_unmask_lowirq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ie0; ie0 = sa1111_readl(mapbase + SA1111_INTEN0); @@ -215,7 +215,7 @@ static void sa1111_unmask_lowirq(unsigned int irq) static int sa1111_retrigger_lowirq(unsigned int irq) { unsigned int mask = SA1111_IRQMASK_LO(irq); - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip0; int i; @@ -236,7 +236,7 @@ static int sa1111_retrigger_lowirq(unsigned int irq) static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) { unsigned int mask = SA1111_IRQMASK_LO(irq); - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip0; if (flags == IRQT_PROBE) @@ -259,7 +259,7 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) static int sa1111_wake_lowirq(unsigned int irq, unsigned int on) { unsigned int mask = SA1111_IRQMASK_LO(irq); - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned long we0; we0 = sa1111_readl(mapbase + SA1111_WAKEEN0); @@ -284,7 +284,7 @@ static struct irq_chip sa1111_low_chip = { static void sa1111_mask_highirq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ie1; ie1 = sa1111_readl(mapbase + SA1111_INTEN1); @@ -294,7 +294,7 @@ static void sa1111_mask_highirq(unsigned int irq) static void sa1111_unmask_highirq(unsigned int irq) { - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ie1; ie1 = sa1111_readl(mapbase + SA1111_INTEN1); @@ -312,7 +312,7 @@ static void sa1111_unmask_highirq(unsigned int irq) static int sa1111_retrigger_highirq(unsigned int irq) { unsigned int mask = SA1111_IRQMASK_HI(irq); - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip1; int i; @@ -333,7 +333,7 @@ static int sa1111_retrigger_highirq(unsigned int irq) static int sa1111_type_highirq(unsigned int irq, unsigned int flags) { unsigned int mask = SA1111_IRQMASK_HI(irq); - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip1; if (flags == IRQT_PROBE) @@ -356,7 +356,7 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags) static int sa1111_wake_highirq(unsigned int irq, unsigned int on) { unsigned int mask = SA1111_IRQMASK_HI(irq); - void __iomem *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chip_data(irq); unsigned long we1; we1 = sa1111_readl(mapbase + SA1111_WAKEEN1); @@ -410,15 +410,15 @@ static void sa1111_setup_irq(struct sa1111 *sachip) for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) { set_irq_chip(irq, &sa1111_low_chip); - set_irq_chipdata(irq, irqbase); - set_irq_handler(irq, do_edge_IRQ); + set_irq_chip_data(irq, irqbase); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) { set_irq_chip(irq, &sa1111_high_chip); - set_irq_chipdata(irq, irqbase); - set_irq_handler(irq, do_edge_IRQ); + set_irq_chip_data(irq, irqbase); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 43d27813452..c026fa2214a 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -27,14 +27,14 @@ static void vic_mask_irq(unsigned int irq) { - void __iomem *base = get_irq_chipdata(irq); + void __iomem *base = get_irq_chip_data(irq); irq &= 31; writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); } static void vic_unmask_irq(unsigned int irq) { - void __iomem *base = get_irq_chipdata(irq); + void __iomem *base = get_irq_chip_data(irq); irq &= 31; writel(1 << irq, base + VIC_INT_ENABLE); } @@ -88,10 +88,10 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, unsigned int irq = irq_start + i; set_irq_chip(irq, &vic_chip); - set_irq_chipdata(irq, base); + set_irq_chip_data(irq, base); if (vic_sources & (1 << i)) { - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index b43041476e0..e10d003566d 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -357,9 +357,9 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x10000000 -CONFIG_MTD_PHYSMAP_LEN=0x200000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +CONFIG_MTD_PHYSMAP_START=0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_PLATRAM is not set @@ -585,7 +585,9 @@ CONFIG_AT91RM9200_WATCHDOG=y # CONFIG_USBPCWATCHDOG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set -CONFIG_AT91_RTC=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91RM9200=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -979,7 +981,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index d96fc8386e2..834dddb5131 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -348,9 +348,9 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x10000000 -CONFIG_MTD_PHYSMAP_LEN=0x800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +CONFIG_MTD_PHYSMAP_START=0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_PLATRAM is not set @@ -566,7 +566,9 @@ CONFIG_AT91RM9200_WATCHDOG=y # CONFIG_USBPCWATCHDOG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set -CONFIG_AT91_RTC=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91RM9200=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -968,7 +970,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig new file mode 100644 index 00000000000..79049206dfa --- /dev/null +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -0,0 +1,950 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc6 +# Fri Nov 17 18:42:21 2006 +# +CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_AT91SAM9260=y +# CONFIG_ARCH_AT91SAM9261 is not set + +# +# AT91SAM9260 Board Type +# +CONFIG_MACH_AT91SAM9260EK=y + +# +# AT91 Board Options +# +# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_DEBUG=y +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +# CONFIG_USB_ETH is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig new file mode 100644 index 00000000000..784ad7c0186 --- /dev/null +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -0,0 +1,1106 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc6 +# Fri Nov 17 18:00:38 2006 +# +CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +CONFIG_ARCH_AT91SAM9261=y + +# +# AT91SAM9261 Board Type +# +CONFIG_MACH_AT91SAM9261EK=y + +# +# AT91 Board Options +# +# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_DM9000=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_AT91=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_DEBUG=y +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +# CONFIG_USB_ETH is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_AT91=m +# CONFIG_MMC_TIFM_SD is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index cfe6bd8e81c..821865f7560 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -1216,7 +1216,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig index d24ae8777c3..d392833b31f 100644 --- a/arch/arm/configs/carmeva_defconfig +++ b/arch/arm/configs/carmeva_defconfig @@ -474,7 +474,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set -# CONFIG_AT91_RTC is not set +# CONFIG_AT91RM9200_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig index 09b7acd7f64..ee130b528bd 100644 --- a/arch/arm/configs/cerfcube_defconfig +++ b/arch/arm/configs/cerfcube_defconfig @@ -851,7 +851,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index a3758913c0b..970c8c772eb 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -934,7 +934,6 @@ CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index c41c04fa502..e8980a9bb89 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -1513,7 +1513,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index 20e68250d83..2cadd51506b 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -1113,7 +1113,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index df8595ac031..94908c1df4c 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -623,7 +623,7 @@ CONFIG_AT91RM9200_WATCHDOG=y # CONFIG_USBPCWATCHDOG is not set # CONFIG_NVRAM is not set CONFIG_RTC=y -# CONFIG_AT91_RTC is not set +# CONFIG_AT91RM9200_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -1062,7 +1062,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 3b4802a849e..f8a66b72ad5 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -125,6 +125,7 @@ CONFIG_CRUNCH=y # # EP93xx Platforms # +CONFIG_MACH_ADSSPHERE=y CONFIG_MACH_EDB9302=y CONFIG_MACH_EDB9312=y CONFIG_MACH_EDB9315=y @@ -1134,7 +1135,6 @@ CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_WAITQ=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig index 9d62ed16bf5..0e739af5271 100644 --- a/arch/arm/configs/h7202_defconfig +++ b/arch/arm/configs/h7202_defconfig @@ -702,7 +702,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index a45b57582b8..1c8fb89a673 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -740,7 +740,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_WAITQ=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 692ab57ba1c..3ce96e60b40 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -835,7 +835,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y # CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index 0d67f66e78c..b275c53728e 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -1204,7 +1204,6 @@ CONFIG_FRAME_POINTER=y # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index 2a8fc153969..848e3ace906 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -1051,7 +1051,6 @@ CONFIG_FRAME_POINTER=y # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig index 27b3e31a8ad..bbd2dcf91e5 100644 --- a/arch/arm/configs/ixp2000_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -1026,7 +1026,6 @@ CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig index 7b18997083c..06deefaec1d 100644 --- a/arch/arm/configs/ixp23xx_defconfig +++ b/arch/arm/configs/ixp23xx_defconfig @@ -1305,7 +1305,6 @@ CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index fac7c3b240c..fabf74c51a8 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -1243,7 +1243,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index 80a6fd97eb3..0c556289a3f 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -889,7 +889,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y # CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index b4cd4b41483..c16537d9d67 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -437,7 +437,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set -# CONFIG_AT91_RTC is not set +# CONFIG_AT91RM9200_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -753,7 +753,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index 4b29e099640..e146189ab54 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -949,7 +949,6 @@ CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig index bf9cf9c6d2d..f8ac29d5c65 100644 --- a/arch/arm/configs/lpd7a400_defconfig +++ b/arch/arm/configs/lpd7a400_defconfig @@ -850,7 +850,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig index 3a57be32e84..46a0f7fe1fa 100644 --- a/arch/arm/configs/lpd7a404_defconfig +++ b/arch/arm/configs/lpd7a404_defconfig @@ -1100,7 +1100,6 @@ CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig index 81daadcbe0b..e544bfbbde5 100644 --- a/arch/arm/configs/lubbock_defconfig +++ b/arch/arm/configs/lubbock_defconfig @@ -772,7 +772,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig index b112bd75bda..cc8c95b9929 100644 --- a/arch/arm/configs/mainstone_defconfig +++ b/arch/arm/configs/mainstone_defconfig @@ -766,7 +766,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig index d16f6cd6e03..577d7e1b5d4 100644 --- a/arch/arm/configs/mx1ads_defconfig +++ b/arch/arm/configs/mx1ads_defconfig @@ -691,7 +691,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index df8168e57b7..e86794a10fc 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -1115,7 +1115,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig index 2cae1ead9f9..c1a63a35c58 100644 --- a/arch/arm/configs/netwinder_defconfig +++ b/arch/arm/configs/netwinder_defconfig @@ -994,7 +994,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig index 61115a77338..57f32f39d0f 100644 --- a/arch/arm/configs/netx_defconfig +++ b/arch/arm/configs/netx_defconfig @@ -872,7 +872,6 @@ CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index 9b9f2155af3..0498ebd7d5d 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -1045,7 +1045,6 @@ CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig index 24e8bdd4cb9..a6b47ea8e46 100644 --- a/arch/arm/configs/pleb_defconfig +++ b/arch/arm/configs/pleb_defconfig @@ -721,7 +721,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y # CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig index a4989f44baa..b5e11aa2e29 100644 --- a/arch/arm/configs/pnx4008_defconfig +++ b/arch/arm/configs/pnx4008_defconfig @@ -1604,7 +1604,6 @@ CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig index b71d31a4bb5..46e5089df0a 100644 --- a/arch/arm/configs/pxa255-idp_defconfig +++ b/arch/arm/configs/pxa255-idp_defconfig @@ -768,7 +768,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index ffd905ff19f..fc39ba1a89f 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -967,7 +967,6 @@ CONFIG_FORCED_INLINING=y # CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 3f1ec4e304f..accbf529ce5 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -759,7 +759,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index b498afdc03b..bc091264d35 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -910,7 +910,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index c0152393e49..3b31a33d008 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1319,7 +1319,6 @@ CONFIG_FORCED_INLINING=y # CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig index c48d1706226..9b6561d119a 100644 --- a/arch/arm/configs/shark_defconfig +++ b/arch/arm/configs/shark_defconfig @@ -965,7 +965,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_LL is not set diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig index 140056a3507..03f783e696b 100644 --- a/arch/arm/configs/simpad_defconfig +++ b/arch/arm/configs/simpad_defconfig @@ -934,7 +934,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index bd03238968c..aa7a0117950 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -1406,7 +1406,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index f7bf6ef27d1..48dca69adda 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -972,7 +972,6 @@ CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 1320a0efca7..ab06a86e85d 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -24,7 +24,9 @@ obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 -obj-$(CONFIG_IWMMXT) += iwmmxt.o iwmmxt-notifier.o +obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o +obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o +obj-$(CONFIG_IWMMXT) += iwmmxt.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt ifneq ($(CONFIG_ARCH_EBSA110),y) diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c index ecf4f9472d9..a11fb9a40c0 100644 --- a/arch/arm/kernel/apm.c +++ b/arch/arm/kernel/apm.c @@ -12,7 +12,6 @@ */ #include <linux/module.h> #include <linux/poll.h> -#include <linux/timer.h> #include <linux/slab.h> #include <linux/proc_fs.h> #include <linux/miscdevice.h> @@ -26,6 +25,7 @@ #include <linux/init.h> #include <linux/completion.h> #include <linux/kthread.h> +#include <linux/delay.h> #include <asm/apm.h> /* apm_power_info */ #include <asm/system.h> @@ -71,7 +71,8 @@ struct apm_user { #define SUSPEND_PENDING 1 /* suspend pending read */ #define SUSPEND_READ 2 /* suspend read, pending ack */ #define SUSPEND_ACKED 3 /* suspend acked */ -#define SUSPEND_DONE 4 /* suspend completed */ +#define SUSPEND_WAIT 4 /* waiting for suspend */ +#define SUSPEND_DONE 5 /* suspend completed */ struct apm_queue queue; }; @@ -101,6 +102,7 @@ static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait); static DEFINE_SPINLOCK(kapmd_queue_lock); static struct apm_queue kapmd_queue; +static DEFINE_MUTEX(state_lock); static const char driver_version[] = "1.13"; /* no spaces */ @@ -148,38 +150,60 @@ static void queue_add_event(struct apm_queue *q, apm_event_t event) q->events[q->event_head] = event; } -static void queue_event_one_user(struct apm_user *as, apm_event_t event) +static void queue_event(apm_event_t event) { - if (as->suser && as->writer) { - switch (event) { - case APM_SYS_SUSPEND: - case APM_USER_SUSPEND: - /* - * If this user already has a suspend pending, - * don't queue another one. - */ - if (as->suspend_state != SUSPEND_NONE) - return; + struct apm_user *as; - as->suspend_state = SUSPEND_PENDING; - suspends_pending++; - break; - } + down_read(&user_list_lock); + list_for_each_entry(as, &apm_user_list, list) { + if (as->reader) + queue_add_event(&as->queue, event); } - queue_add_event(&as->queue, event); + up_read(&user_list_lock); + wake_up_interruptible(&apm_waitqueue); } -static void queue_event(apm_event_t event, struct apm_user *sender) +/* + * queue_suspend_event - queue an APM suspend event. + * + * Check that we're in a state where we can suspend. If not, + * return -EBUSY. Otherwise, queue an event to all "writer" + * users. If there are no "writer" users, return '1' to + * indicate that we can immediately suspend. + */ +static int queue_suspend_event(apm_event_t event, struct apm_user *sender) { struct apm_user *as; + int ret = 1; + mutex_lock(&state_lock); down_read(&user_list_lock); + + /* + * If a thread is still processing, we can't suspend, so reject + * the request. + */ list_for_each_entry(as, &apm_user_list, list) { - if (as != sender && as->reader) - queue_event_one_user(as, event); + if (as != sender && as->reader && as->writer && as->suser && + as->suspend_state != SUSPEND_NONE) { + ret = -EBUSY; + goto out; + } } + + list_for_each_entry(as, &apm_user_list, list) { + if (as != sender && as->reader && as->writer && as->suser) { + as->suspend_state = SUSPEND_PENDING; + suspends_pending++; + queue_add_event(&as->queue, event); + ret = 0; + } + } + out: up_read(&user_list_lock); + mutex_unlock(&state_lock); wake_up_interruptible(&apm_waitqueue); + return ret; } static void apm_suspend(void) @@ -191,17 +215,22 @@ static void apm_suspend(void) * Anyone on the APM queues will think we're still suspended. * Send a message so everyone knows we're now awake again. */ - queue_event(APM_NORMAL_RESUME, NULL); + queue_event(APM_NORMAL_RESUME); /* * Finally, wake up anyone who is sleeping on the suspend. */ + mutex_lock(&state_lock); down_read(&user_list_lock); list_for_each_entry(as, &apm_user_list, list) { - as->suspend_result = err; - as->suspend_state = SUSPEND_DONE; + if (as->suspend_state == SUSPEND_WAIT || + as->suspend_state == SUSPEND_ACKED) { + as->suspend_result = err; + as->suspend_state = SUSPEND_DONE; + } } up_read(&user_list_lock); + mutex_unlock(&state_lock); wake_up(&apm_suspend_waitqueue); } @@ -227,8 +256,11 @@ static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t if (copy_to_user(buf, &event, sizeof(event))) break; - if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND) + mutex_lock(&state_lock); + if (as->suspend_state == SUSPEND_PENDING && + (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)) as->suspend_state = SUSPEND_READ; + mutex_unlock(&state_lock); buf += sizeof(event); i -= sizeof(event); @@ -270,9 +302,13 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) switch (cmd) { case APM_IOC_SUSPEND: + mutex_lock(&state_lock); + as->suspend_result = -EINTR; if (as->suspend_state == SUSPEND_READ) { + int pending; + /* * If we read a suspend command from /dev/apm_bios, * then the corresponding APM_IOC_SUSPEND ioctl is @@ -280,47 +316,73 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) */ as->suspend_state = SUSPEND_ACKED; suspends_pending--; + pending = suspends_pending == 0; + mutex_unlock(&state_lock); + + /* + * If there are no further acknowledges required, + * suspend the system. + */ + if (pending) + apm_suspend(); + + /* + * Wait for the suspend/resume to complete. If there + * are pending acknowledges, we wait here for them. + * + * Note: we need to ensure that the PM subsystem does + * not kick us out of the wait when it suspends the + * threads. + */ + flags = current->flags; + current->flags |= PF_NOFREEZE; + + wait_event(apm_suspend_waitqueue, + as->suspend_state == SUSPEND_DONE); } else { + as->suspend_state = SUSPEND_WAIT; + mutex_unlock(&state_lock); + /* * Otherwise it is a request to suspend the system. * Queue an event for all readers, and expect an * acknowledge from all writers who haven't already * acknowledged. */ - queue_event(APM_USER_SUSPEND, as); - } - - /* - * If there are no further acknowledges required, suspend - * the system. - */ - if (suspends_pending == 0) - apm_suspend(); + err = queue_suspend_event(APM_USER_SUSPEND, as); + if (err < 0) { + /* + * Avoid taking the lock here - this + * should be fine. + */ + as->suspend_state = SUSPEND_NONE; + break; + } + + if (err > 0) + apm_suspend(); - /* - * Wait for the suspend/resume to complete. If there are - * pending acknowledges, we wait here for them. - * - * Note that we need to ensure that the PM subsystem does - * not kick us out of the wait when it suspends the threads. - */ - flags = current->flags; - current->flags |= PF_NOFREEZE; + /* + * Wait for the suspend/resume to complete. If there + * are pending acknowledges, we wait here for them. + * + * Note: we need to ensure that the PM subsystem does + * not kick us out of the wait when it suspends the + * threads. + */ + flags = current->flags; + current->flags |= PF_NOFREEZE; - /* - * Note: do not allow a thread which is acking the suspend - * to escape until the resume is complete. - */ - if (as->suspend_state == SUSPEND_ACKED) - wait_event(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE); - else wait_event_interruptible(apm_suspend_waitqueue, as->suspend_state == SUSPEND_DONE); + } current->flags = flags; + + mutex_lock(&state_lock); err = as->suspend_result; as->suspend_state = SUSPEND_NONE; + mutex_unlock(&state_lock); break; } @@ -330,6 +392,8 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) static int apm_release(struct inode * inode, struct file * filp) { struct apm_user *as = filp->private_data; + int pending = 0; + filp->private_data = NULL; down_write(&user_list_lock); @@ -342,11 +406,14 @@ static int apm_release(struct inode * inode, struct file * filp) * need to balance suspends_pending, which means the * possibility of sleeping. */ + mutex_lock(&state_lock); if (as->suspend_state != SUSPEND_NONE) { suspends_pending -= 1; - if (suspends_pending == 0) - apm_suspend(); + pending = suspends_pending == 0; } + mutex_unlock(&state_lock); + if (pending) + apm_suspend(); kfree(as); return 0; @@ -470,6 +537,7 @@ static int kapmd(void *arg) { do { apm_event_t event; + int ret; wait_event_interruptible(kapmd_wait, !queue_empty(&kapmd_queue) || kthread_should_stop()); @@ -489,13 +557,20 @@ static int kapmd(void *arg) case APM_LOW_BATTERY: case APM_POWER_STATUS_CHANGE: - queue_event(event, NULL); + queue_event(event); break; case APM_USER_SUSPEND: case APM_SYS_SUSPEND: - queue_event(event, NULL); - if (suspends_pending == 0) + ret = queue_suspend_event(event, NULL); + if (ret < 0) { + /* + * We were busy. Try again in 50ms. + */ + queue_add_event(&kapmd_queue, event); + msleep(50); + } + if (ret > 0) apm_suspend(); break; diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index cc2d58d028e..3c078e34675 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -15,6 +15,7 @@ #include <asm/mach/arch.h> #include <asm/thread_info.h> #include <asm/memory.h> +#include <asm/procinfo.h> /* * Make sure that the compiler and target are compatible. diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index b27513a0f11..a786f769035 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -529,7 +529,7 @@ static void ecard_dump_irq_state(void) } } -static void ecard_check_lockup(struct irqdesc *desc) +static void ecard_check_lockup(struct irq_desc *desc) { static unsigned long last; static int lockup; @@ -567,7 +567,7 @@ static void ecard_check_lockup(struct irqdesc *desc) } static void -ecard_irq_handler(unsigned int irq, struct irqdesc *desc) +ecard_irq_handler(unsigned int irq, struct irq_desc *desc) { ecard_t *ec; int called = 0; @@ -585,7 +585,7 @@ ecard_irq_handler(unsigned int irq, struct irqdesc *desc) pending = ecard_default_ops.irqpending(ec); if (pending) { - struct irqdesc *d = irq_desc + ec->irq; + struct irq_desc *d = irq_desc + ec->irq; desc_handle_irq(ec->irq, d); called ++; } @@ -609,7 +609,7 @@ static unsigned char first_set[] = }; static void -ecard_irqexp_handler(unsigned int irq, struct irqdesc *desc) +ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc) { const unsigned int statusmask = 15; unsigned int status; @@ -1022,7 +1022,7 @@ ecard_probe(int slot, card_type_t type) if (slot < 8) { ec->irq = 32 + slot; set_irq_chip(ec->irq, &ecard_chip); - set_irq_handler(ec->irq, do_level_IRQ); + set_irq_handler(ec->irq, handle_level_irq); set_irq_flags(ec->irq, IRQF_VALID); } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index bd623b73445..2db42b18f53 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -589,10 +589,6 @@ ENTRY(__switch_to) strex r5, r4, [ip] @ Clear exclusive monitor #endif #endif -#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT) - mra r4, r5, acc0 - stmia ip, {r4, r5} -#endif #if defined(CONFIG_HAS_TLS_REG) mcr p15, 0, r3, c13, c0, 3 @ set TLS register #elif !defined(CONFIG_TLS_REG_EMUL) @@ -602,11 +598,6 @@ ENTRY(__switch_to) #ifdef CONFIG_MMU mcr p15, 0, r6, c3, c0, 0 @ Set domain register #endif -#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT) - add r4, r2, #TI_CPU_DOMAIN + 40 @ cpu_context_save->extra - ldmib r4, {r4, r5} - mar acc0, r4, r5 -#endif mov r5, r0 add r4, r2, #TI_CPU_SAVE ldr r0, =thread_notify_head diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index f359a189dcf..0119c0d5f97 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -16,7 +16,6 @@ #include <asm/assembler.h> #include <asm/mach-types.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index ebc3e74a794..bda0748ffb0 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -16,7 +16,6 @@ #include <asm/assembler.h> #include <asm/domain.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> #include <asm/asm-offsets.h> #include <asm/memory.h> diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 2c4ff1cbe33..ec01f08f564 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -112,7 +112,7 @@ static struct irq_desc bad_irq_desc = { asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); - struct irqdesc *desc = irq_desc + irq; + struct irq_desc *desc = irq_desc + irq; /* * Some hardware gives randomly wrong interrupts. Rather @@ -134,7 +134,7 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) void set_irq_flags(unsigned int irq, unsigned int iflags) { - struct irqdesc *desc; + struct irq_desc *desc; unsigned long flags; if (irq >= NR_IRQS) { @@ -171,7 +171,7 @@ void __init init_IRQ(void) #ifdef CONFIG_HOTPLUG_CPU -static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu) +static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu) { pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu); @@ -190,7 +190,7 @@ void migrate_irqs(void) unsigned int i, cpu = smp_processor_id(); for (i = 0; i < NR_IRQS; i++) { - struct irqdesc *desc = irq_desc + i; + struct irq_desc *desc = irq_desc + i; if (desc->cpu == cpu) { unsigned int newcpu = any_online_cpu(desc->affinity); diff --git a/arch/arm/kernel/iwmmxt-notifier.c b/arch/arm/kernel/iwmmxt-notifier.c deleted file mode 100644 index 0d1a1db4006..00000000000 --- a/arch/arm/kernel/iwmmxt-notifier.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/arm/kernel/iwmmxt-notifier.c - * - * XScale iWMMXt (Concan) context switching and handling - * - * Initial code: - * Copyright (c) 2003, Intel Corporation - * - * Full lazy switching support, optimizations and more, by Nicolas Pitre - * Copyright (c) 2003-2004, MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <asm/thread_notify.h> -#include <asm/io.h> - -static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t) -{ - struct thread_info *thread = t; - - switch (cmd) { - case THREAD_NOTIFY_FLUSH: - /* - * flush_thread() zeroes thread->fpstate, so no need - * to do anything here. - * - * FALLTHROUGH: Ensure we don't try to overwrite our newly - * initialised state information on the first fault. - */ - - case THREAD_NOTIFY_RELEASE: - iwmmxt_task_release(thread); - break; - - case THREAD_NOTIFY_SWITCH: - iwmmxt_task_switch(thread); - break; - } - - return NOTIFY_DONE; -} - -static struct notifier_block iwmmxt_notifier_block = { - .notifier_call = iwmmxt_do, -}; - -static int __init iwmmxt_init(void) -{ - thread_register_notifier(&iwmmxt_notifier_block); - - return 0; -} - -late_initcall(iwmmxt_init); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index bf35c178a87..a9e8f7e55fd 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -281,67 +281,6 @@ void show_fpregs(struct user_fp *regs) } /* - * Task structure and kernel stack allocation. - */ -struct thread_info_list { - unsigned long *head; - unsigned int nr; -}; - -static DEFINE_PER_CPU(struct thread_info_list, thread_info_list) = { NULL, 0 }; - -#define EXTRA_TASK_STRUCT 4 - -struct thread_info *alloc_thread_info(struct task_struct *task) -{ - struct thread_info *thread = NULL; - - if (EXTRA_TASK_STRUCT) { - struct thread_info_list *th = &get_cpu_var(thread_info_list); - unsigned long *p = th->head; - - if (p) { - th->head = (unsigned long *)p[0]; - th->nr -= 1; - } - put_cpu_var(thread_info_list); - - thread = (struct thread_info *)p; - } - - if (!thread) - thread = (struct thread_info *) - __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER); - -#ifdef CONFIG_DEBUG_STACK_USAGE - /* - * The stack must be cleared if you want SYSRQ-T to - * give sensible stack usage information - */ - if (thread) - memzero(thread, THREAD_SIZE); -#endif - return thread; -} - -void free_thread_info(struct thread_info *thread) -{ - if (EXTRA_TASK_STRUCT) { - struct thread_info_list *th = &get_cpu_var(thread_info_list); - if (th->nr < EXTRA_TASK_STRUCT) { - unsigned long *p = (unsigned long *)thread; - p[0] = (unsigned long)th->head; - th->head = p; - th->nr += 1; - put_cpu_var(thread_info_list); - return; - } - put_cpu_var(thread_info_list); - } - free_pages((unsigned long)thread, THREAD_SIZE_ORDER); -} - -/* * Free current thread data structures etc.. */ void exit_thread(void) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 29efc9f8205..238dd9b6db8 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -357,9 +357,6 @@ static void __init setup_processor(void) #ifndef CONFIG_VFP elf_hwcap &= ~HWCAP_VFP; #endif -#ifndef CONFIG_IWMMXT - elf_hwcap &= ~HWCAP_IWMMXT; -#endif cpu_proc_init(); } @@ -441,16 +438,19 @@ __early_param("initrd=", early_initrd); static void __init arm_add_memory(unsigned long start, unsigned long size) { + struct membank *bank; + /* * Ensure that start/size are aligned to a page boundary. * Size is appropriately rounded down, start is rounded up. */ size -= start & ~PAGE_MASK; - meminfo.bank[meminfo.nr_banks].start = PAGE_ALIGN(start); - meminfo.bank[meminfo.nr_banks].size = size & PAGE_MASK; - meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(start); - meminfo.nr_banks += 1; + bank = &meminfo.bank[meminfo.nr_banks++]; + + bank->start = PAGE_ALIGN(start); + bank->size = size & PAGE_MASK; + bank->node = PHYS_TO_NID(start); } /* diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 48cf7fffddf..f2b1d61fbc0 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -12,6 +12,7 @@ #include <linux/ptrace.h> #include <linux/personality.h> +#include <asm/elf.h> #include <asm/cacheflush.h> #include <asm/ucontext.h> #include <asm/uaccess.h> diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index bede380c07a..042a12982e9 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -631,12 +631,9 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs) notify_die("unknown data abort code", regs, &info, instr, 0); } -void __attribute__((noreturn)) __bug(const char *file, int line, void *data) +void __attribute__((noreturn)) __bug(const char *file, int line) { - printk(KERN_CRIT"kernel BUG at %s:%d!", file, line); - if (data) - printk(" - extra data = %p", data); - printk("\n"); + printk(KERN_CRIT"kernel BUG at %s:%d!\n", file, line); *(int *)0 = 0; /* Avoid "noreturn function does return" */ diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c new file mode 100644 index 00000000000..180000bfdc8 --- /dev/null +++ b/arch/arm/kernel/xscale-cp0.c @@ -0,0 +1,179 @@ +/* + * linux/arch/arm/kernel/xscale-cp0.c + * + * XScale DSP and iWMMXt coprocessor context switching and handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <asm/thread_notify.h> +#include <asm/io.h> + +static inline void dsp_save_state(u32 *state) +{ + __asm__ __volatile__ ( + "mrrc p0, 0, %0, %1, c0\n" + : "=r" (state[0]), "=r" (state[1])); +} + +static inline void dsp_load_state(u32 *state) +{ + __asm__ __volatile__ ( + "mcrr p0, 0, %0, %1, c0\n" + : : "r" (state[0]), "r" (state[1])); +} + +static int dsp_do(struct notifier_block *self, unsigned long cmd, void *t) +{ + struct thread_info *thread = t; + + switch (cmd) { + case THREAD_NOTIFY_FLUSH: + thread->cpu_context.extra[0] = 0; + thread->cpu_context.extra[1] = 0; + break; + + case THREAD_NOTIFY_SWITCH: + dsp_save_state(current_thread_info()->cpu_context.extra); + dsp_load_state(thread->cpu_context.extra); + break; + } + + return NOTIFY_DONE; +} + +static struct notifier_block dsp_notifier_block = { + .notifier_call = dsp_do, +}; + + +#ifdef CONFIG_IWMMXT +static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t) +{ + struct thread_info *thread = t; + + switch (cmd) { + case THREAD_NOTIFY_FLUSH: + /* + * flush_thread() zeroes thread->fpstate, so no need + * to do anything here. + * + * FALLTHROUGH: Ensure we don't try to overwrite our newly + * initialised state information on the first fault. + */ + + case THREAD_NOTIFY_RELEASE: + iwmmxt_task_release(thread); + break; + + case THREAD_NOTIFY_SWITCH: + iwmmxt_task_switch(thread); + break; + } + + return NOTIFY_DONE; +} + +static struct notifier_block iwmmxt_notifier_block = { + .notifier_call = iwmmxt_do, +}; +#endif + + +static u32 __init xscale_cp_access_read(void) +{ + u32 value; + + __asm__ __volatile__ ( + "mrc p15, 0, %0, c15, c1, 0\n\t" + : "=r" (value)); + + return value; +} + +static void __init xscale_cp_access_write(u32 value) +{ + u32 temp; + + __asm__ __volatile__ ( + "mcr p15, 0, %1, c15, c1, 0\n\t" + "mrc p15, 0, %0, c15, c1, 0\n\t" + "mov %0, %0\n\t" + "sub pc, pc, #4\n\t" + : "=r" (temp) : "r" (value)); +} + +/* + * Detect whether we have a MAC coprocessor (40 bit register) or an + * iWMMXt coprocessor (64 bit registers) by loading 00000100:00000000 + * into a coprocessor register and reading it back, and checking + * whether the upper word survived intact. + */ +static int __init cpu_has_iwmmxt(void) +{ + u32 lo; + u32 hi; + + /* + * This sequence is interpreted by the DSP coprocessor as: + * mar acc0, %2, %3 + * mra %0, %1, acc0 + * + * And by the iWMMXt coprocessor as: + * tmcrr wR0, %2, %3 + * tmrrc %0, %1, wR0 + */ + __asm__ __volatile__ ( + "mcrr p0, 0, %2, %3, c0\n" + "mrrc p0, 0, %0, %1, c0\n" + : "=r" (lo), "=r" (hi) + : "r" (0), "r" (0x100)); + + return !!hi; +} + + +/* + * If we detect that the CPU has iWMMXt (and CONFIG_IWMMXT=y), we + * disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy + * switch code handle iWMMXt context switching. If on the other + * hand the CPU has a DSP coprocessor, we keep access to CP0 enabled + * all the time, and save/restore acc0 on context switch in non-lazy + * fashion. + */ +static int __init xscale_cp0_init(void) +{ + u32 cp_access; + + cp_access = xscale_cp_access_read() & ~3; + xscale_cp_access_write(cp_access | 1); + + if (cpu_has_iwmmxt()) { +#ifndef CONFIG_IWMMXT + printk(KERN_WARNING "CAUTION: XScale iWMMXt coprocessor " + "detected, but kernel support is missing.\n"); +#else + printk(KERN_INFO "XScale iWMMXt coprocessor detected.\n"); + elf_hwcap |= HWCAP_IWMMXT; + thread_register_notifier(&iwmmxt_notifier_block); +#endif + } else { + printk(KERN_INFO "XScale DSP coprocessor detected.\n"); + thread_register_notifier(&dsp_notifier_block); + cp_access |= 1; + } + + xscale_cp_access_write(cp_access); + + return 0; +} + +late_initcall(xscale_cp0_init); diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index fe3d297d682..a950160fcfb 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -82,7 +82,7 @@ static void aaec2000_int_unmask(unsigned int irq) IRQ_INTENS |= (1 << irq); } -static struct irqchip aaec2000_irq_chip = { +static struct irq_chip aaec2000_irq_chip = { .ack = aaec2000_int_ack, .mask = aaec2000_int_mask, .unmask = aaec2000_int_unmask, @@ -93,7 +93,7 @@ void __init aaec2000_init_irq(void) unsigned int i; for (i = 0; i < NR_IRQS; i++) { - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_chip(i, &aaec2000_irq_chip); set_irq_flags(i, IRQF_VALID); } diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig index 2f85e8693b1..9f11db8af23 100644 --- a/arch/arm/mach-at91rm9200/Kconfig +++ b/arch/arm/mach-at91rm9200/Kconfig @@ -2,7 +2,8 @@ if ARCH_AT91 menu "Atmel AT91 System-on-Chip" -comment "Atmel AT91 Processors" +choice + prompt "Atmel AT91 Processor" config ARCH_AT91RM9200 bool "AT91RM9200" @@ -13,6 +14,8 @@ config ARCH_AT91SAM9260 config ARCH_AT91SAM9261 bool "AT91SAM9261" +endchoice + # ---------------------------------------------------------- if ARCH_AT91RM9200 @@ -33,7 +36,6 @@ config ARCH_AT91RM9200DK Select this if you are using Atmel's AT91RM9200-DK Development board. (Discontinued) - config MACH_AT91RM9200EK bool "Atmel AT91RM9200-EK Evaluation Kit" depends on ARCH_AT91RM9200 @@ -90,6 +92,13 @@ if ARCH_AT91SAM9260 comment "AT91SAM9260 Board Type" +config MACH_AT91SAM9260EK + bool "Atmel AT91SAM9260-EK Evaluation Kit" + depends on ARCH_AT91SAM9260 + help + Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> + endif # ---------------------------------------------------------- @@ -98,8 +107,31 @@ if ARCH_AT91SAM9261 comment "AT91SAM9261 Board Type" +config MACH_AT91SAM9261EK + bool "Atmel AT91SAM9261-EK Evaluation Kit" + depends on ARCH_AT91SAM9261 + help + Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> + endif +# ---------------------------------------------------------- + +comment "AT91 Board Options" + +config MTD_AT91_DATAFLASH_CARD + bool "Enable DataFlash Card support" + depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK) + help + Enable support for the DataFlash card. + +config MTD_NAND_AT91_BUSWIDTH_16 + bool "Enable 16-bit data bus interface to NAND flash" + depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK) + help + On AT91SAM926x boards both types of NAND flash can be present + (8 and 16 bit data bus width). # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile index c174805c24e..cf777007847 100644 --- a/arch/arm/mach-at91rm9200/Makefile +++ b/arch/arm/mach-at91rm9200/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := clock.o irq.o gpio.o devices.o +obj-y := clock.o irq.o gpio.o obj-m := obj-n := obj- := @@ -10,11 +10,11 @@ obj- := obj-$(CONFIG_PM) += pm.o # CPU-specific support -obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o -obj-$(CONFIG_ARCH_AT91SAM9260) += -obj-$(CONFIG_ARCH_AT91SAM9261) += +obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o +obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o +obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o -# AT91RM9200 Board-specific support +# AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o @@ -26,8 +26,10 @@ obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o # AT91SAM9260 board-specific support +obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o # AT91SAM9261 board-specific support +obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o # LEDs support led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c index dcf6136fedf..a92e9a495b0 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200.c +++ b/arch/arm/mach-at91rm9200/at91rm9200.c @@ -14,8 +14,10 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/arch/at91rm9200.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_st.h> -#include <asm/hardware.h> #include "generic.h" #include "clock.h" @@ -26,32 +28,12 @@ static struct map_desc at91rm9200_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = AT91_VA_BASE_SPI, - .pfn = __phys_to_pfn(AT91RM9200_BASE_SPI), - .length = SZ_16K, - .type = MT_DEVICE, - }, { .virtual = AT91_VA_BASE_EMAC, .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), .length = SZ_16K, .type = MT_DEVICE, }, { - .virtual = AT91_VA_BASE_TWI, - .pfn = __phys_to_pfn(AT91RM9200_BASE_TWI), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_MCI, - .pfn = __phys_to_pfn(AT91RM9200_BASE_MCI), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_UDP, - .pfn = __phys_to_pfn(AT91RM9200_BASE_UDP), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_SRAM_VIRT_BASE, + .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE, .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE), .length = AT91RM9200_SRAM_SIZE, .type = MT_DEVICE, @@ -222,6 +204,16 @@ static struct at91_gpio_bank at91rm9200_gpio[] = { } }; +static void at91rm9200_reset(void) +{ + /* + * Perform a hardware reset with the use of the Watchdog timer. + */ + at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); + at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); +} + + /* -------------------------------------------------------------------- * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ @@ -230,6 +222,12 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks /* Map peripherals */ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); + at91_arch_reset = at91rm9200_reset; + at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) + | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) + | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) + | (1 << AT91RM9200_ID_IRQ6); + /* Init clock subsystem */ at91_clock_init(main_clock); diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/at91rm9200_devices.c index 05982437662..4641b99db0e 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/at91rm9200_devices.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-at91rm9200/devices.c + * arch/arm/mach-at91rm9200/at91rm9200_devices.c * * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> * Copyright (C) 2005 David Brownell @@ -15,9 +15,10 @@ #include <linux/platform_device.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> +#include <asm/arch/at91rm9200.h> +#include <asm/arch/at91rm9200_mc.h> #include "generic.h" @@ -33,7 +34,7 @@ static u64 ohci_dmamask = 0xffffffffUL; static struct at91_usbh_data usbh_data; -static struct resource at91_usbh_resources[] = { +static struct resource usbh_resources[] = { [0] = { .start = AT91RM9200_UHP_BASE, .end = AT91RM9200_UHP_BASE + SZ_1M - 1, @@ -54,8 +55,8 @@ static struct platform_device at91rm9200_usbh_device = { .coherent_dma_mask = 0xffffffff, .platform_data = &usbh_data, }, - .resource = at91_usbh_resources, - .num_resources = ARRAY_SIZE(at91_usbh_resources), + .resource = usbh_resources, + .num_resources = ARRAY_SIZE(usbh_resources), }; void __init at91_add_device_usbh(struct at91_usbh_data *data) @@ -78,7 +79,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} #ifdef CONFIG_USB_GADGET_AT91 static struct at91_udc_data udc_data; -static struct resource at91_udc_resources[] = { +static struct resource udc_resources[] = { [0] = { .start = AT91RM9200_BASE_UDP, .end = AT91RM9200_BASE_UDP + SZ_16K - 1, @@ -97,8 +98,8 @@ static struct platform_device at91rm9200_udc_device = { .dev = { .platform_data = &udc_data, }, - .resource = at91_udc_resources, - .num_resources = ARRAY_SIZE(at91_udc_resources), + .resource = udc_resources, + .num_resources = ARRAY_SIZE(udc_resources), }; void __init at91_add_device_udc(struct at91_udc_data *data) @@ -129,7 +130,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} static u64 eth_dmamask = 0xffffffffUL; static struct at91_eth_data eth_data; -static struct resource at91_eth_resources[] = { +static struct resource eth_resources[] = { [0] = { .start = AT91_VA_BASE_EMAC, .end = AT91_VA_BASE_EMAC + SZ_16K - 1, @@ -150,8 +151,8 @@ static struct platform_device at91rm9200_eth_device = { .coherent_dma_mask = 0xffffffff, .platform_data = ð_data, }, - .resource = at91_eth_resources, - .num_resources = ARRAY_SIZE(at91_eth_resources), + .resource = eth_resources, + .num_resources = ARRAY_SIZE(eth_resources), }; void __init at91_add_device_eth(struct at91_eth_data *data) @@ -202,11 +203,13 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {} #if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf_data; -static struct resource at91_cf_resources[] = { +#define CF_BASE AT91_CHIPSELECT_4 + +static struct resource cf_resources[] = { [0] = { - .start = AT91_CF_BASE, + .start = CF_BASE, /* ties up CS4, CS5 and CS6 */ - .end = AT91_CF_BASE + (0x30000000 - 1), + .end = CF_BASE + (0x30000000 - 1), .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, }, }; @@ -217,15 +220,38 @@ static struct platform_device at91rm9200_cf_device = { .dev = { .platform_data = &cf_data, }, - .resource = at91_cf_resources, - .num_resources = ARRAY_SIZE(at91_cf_resources), + .resource = cf_resources, + .num_resources = ARRAY_SIZE(cf_resources), }; void __init at91_add_device_cf(struct at91_cf_data *data) { + unsigned int csa; + if (!data) return; + data->chipselect = 4; /* can only use EBI ChipSelect 4 */ + + /* CF takes over CS4, CS5, CS6 */ + csa = at91_sys_read(AT91_EBI_CSA); + at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH); + + /* + * Static memory controller timing adjustments. + * REVISIT: these timings are in terms of MCK cycles, so + * when MCK changes (cpufreq etc) so must these values... + */ + at91_sys_write(AT91_SMC_CSR(4), + AT91_SMC_ACSS_STD + | AT91_SMC_DBW_16 + | AT91_SMC_BAT + | AT91_SMC_WSEN + | AT91_SMC_NWS_(32) /* wait states */ + | AT91_SMC_RWSETUP_(6) /* setup time */ + | AT91_SMC_RWHOLD_(4) /* hold time */ + ); + /* input/irq */ if (data->irq_pin) { at91_set_gpio_input(data->irq_pin, 1); @@ -245,6 +271,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */ at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */ + /* nWAIT is _not_ a default setting */ + at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */ + cf_data = *data; platform_device_register(&at91rm9200_cf_device); } @@ -257,11 +286,11 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91RM9200) || defined(CONFIG_MMC_AT91RM9200_MODULE) +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) static u64 mmc_dmamask = 0xffffffffUL; static struct at91_mmc_data mmc_data; -static struct resource at91_mmc_resources[] = { +static struct resource mmc_resources[] = { [0] = { .start = AT91RM9200_BASE_MCI, .end = AT91RM9200_BASE_MCI + SZ_16K - 1, @@ -282,8 +311,8 @@ static struct platform_device at91rm9200_mmc_device = { .coherent_dma_mask = 0xffffffff, .platform_data = &mmc_data, }, - .resource = at91_mmc_resources, - .num_resources = ARRAY_SIZE(at91_mmc_resources), + .resource = mmc_resources, + .num_resources = ARRAY_SIZE(mmc_resources), }; void __init at91_add_device_mmc(struct at91_mmc_data *data) @@ -298,31 +327,33 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data) } if (data->wp_pin) at91_set_gpio_input(data->wp_pin, 1); + if (data->vcc_pin) + at91_set_gpio_output(data->vcc_pin, 0); /* CLK */ at91_set_A_periph(AT91_PIN_PA27, 0); - if (data->is_b) { + if (data->slot_b) { /* CMD */ - at91_set_B_periph(AT91_PIN_PA8, 0); + at91_set_B_periph(AT91_PIN_PA8, 1); /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA9, 0); + at91_set_B_periph(AT91_PIN_PA9, 1); if (data->wire4) { - at91_set_B_periph(AT91_PIN_PA10, 0); - at91_set_B_periph(AT91_PIN_PA11, 0); - at91_set_B_periph(AT91_PIN_PA12, 0); + at91_set_B_periph(AT91_PIN_PA10, 1); + at91_set_B_periph(AT91_PIN_PA11, 1); + at91_set_B_periph(AT91_PIN_PA12, 1); } } else { /* CMD */ - at91_set_A_periph(AT91_PIN_PA28, 0); + at91_set_A_periph(AT91_PIN_PA28, 1); /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA29, 0); + at91_set_A_periph(AT91_PIN_PA29, 1); if (data->wire4) { - at91_set_B_periph(AT91_PIN_PB3, 0); - at91_set_B_periph(AT91_PIN_PB4, 0); - at91_set_B_periph(AT91_PIN_PB5, 0); + at91_set_B_periph(AT91_PIN_PB3, 1); + at91_set_B_periph(AT91_PIN_PB4, 1); + at91_set_B_periph(AT91_PIN_PB5, 1); } } @@ -341,29 +372,45 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data) {} #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) static struct at91_nand_data nand_data; -static struct resource at91_nand_resources[] = { +#define NAND_BASE AT91_CHIPSELECT_3 + +static struct resource nand_resources[] = { { - .start = AT91_SMARTMEDIA_BASE, - .end = AT91_SMARTMEDIA_BASE + SZ_8M - 1, + .start = NAND_BASE, + .end = NAND_BASE + SZ_8M - 1, .flags = IORESOURCE_MEM, } }; -static struct platform_device at91_nand_device = { +static struct platform_device at91rm9200_nand_device = { .name = "at91_nand", .id = -1, .dev = { .platform_data = &nand_data, }, - .resource = at91_nand_resources, - .num_resources = ARRAY_SIZE(at91_nand_resources), + .resource = nand_resources, + .num_resources = ARRAY_SIZE(nand_resources), }; void __init at91_add_device_nand(struct at91_nand_data *data) { + unsigned int csa; + if (!data) return; + /* enable the address range of CS3 */ + csa = at91_sys_read(AT91_EBI_CSA); + at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA); + + /* set the bus interface characteristics */ + at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN + | AT91_SMC_NWS_(5) + | AT91_SMC_TDF_(1) + | AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */ + | AT91_SMC_RWHOLD_(1) /* tDH Data Hold Time 20 - ns */ + ); + /* enable pin */ if (data->enable_pin) at91_set_gpio_output(data->enable_pin, 1); @@ -380,7 +427,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */ nand_data = *data; - platform_device_register(&at91_nand_device); + platform_device_register(&at91rm9200_nand_device); } #else void __init at91_add_device_nand(struct at91_nand_data *data) {} @@ -392,10 +439,25 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) + +static struct resource twi_resources[] = { + [0] = { + .start = AT91RM9200_BASE_TWI, + .end = AT91RM9200_BASE_TWI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_TWI, + .end = AT91RM9200_ID_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device at91rm9200_twi_device = { .name = "at91_i2c", .id = -1, - .num_resources = 0, + .resource = twi_resources, + .num_resources = ARRAY_SIZE(twi_resources), }; void __init at91_add_device_i2c(void) @@ -421,7 +483,7 @@ void __init at91_add_device_i2c(void) {} #if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) static u64 spi_dmamask = 0xffffffffUL; -static struct resource at91_spi_resources[] = { +static struct resource spi_resources[] = { [0] = { .start = AT91RM9200_BASE_SPI, .end = AT91RM9200_BASE_SPI + SZ_16K - 1, @@ -438,14 +500,14 @@ static struct platform_device at91rm9200_spi_device = { .name = "at91_spi", .id = 0, .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &spi_dmamask, + .coherent_dma_mask = 0xffffffff, }, - .resource = at91_spi_resources, - .num_resources = ARRAY_SIZE(at91_spi_resources), + .resource = spi_resources, + .num_resources = ARRAY_SIZE(spi_resources), }; -static const unsigned at91_spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; +static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) { @@ -461,7 +523,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) if (devices[i].controller_data) cs_pin = (unsigned long) devices[i].controller_data; else - cs_pin = at91_spi_standard_cs[devices[i].chip_select]; + cs_pin = spi_standard_cs[devices[i].chip_select]; #ifdef CONFIG_SPI_AT91_MANUAL_CS at91_set_gpio_output(cs_pin, 1); @@ -474,7 +536,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) } spi_register_board_info(devices, nr_devices); - at91_clock_associate("spi0_clk", &at91rm9200_spi_device.dev, "spi"); + at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi"); platform_device_register(&at91rm9200_spi_device); } #else @@ -486,7 +548,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * RTC * -------------------------------------------------------------------- */ -#if defined(CONFIG_RTC_DRV_AT91) || defined(CONFIG_RTC_DRV_AT91_MODULE) +#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) static struct platform_device at91rm9200_rtc_device = { .name = "at91_rtc", .id = -1, @@ -506,7 +568,7 @@ static void __init at91_add_device_rtc(void) {} * Watchdog * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91_WATCHDOG) || defined(CONFIG_AT91_WATCHDOG_MODULE) +#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE) static struct platform_device at91rm9200_wdt_device = { .name = "at91_wdt", .id = -1, diff --git a/arch/arm/mach-at91rm9200/at91rm9200_time.c b/arch/arm/mach-at91rm9200/at91rm9200_time.c index 07c9cea8961..b999e192a7e 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200_time.c +++ b/arch/arm/mach-at91rm9200/at91rm9200_time.c @@ -30,6 +30,8 @@ #include <asm/io.h> #include <asm/mach/time.h> +#include <asm/arch/at91_st.h> + static unsigned long last_crtr; /* @@ -99,6 +101,9 @@ void at91rm9200_timer_reset(void) /* Set Period Interval timer */ at91_sys_write(AT91_ST_PIMR, LATCH); + /* Clear any pending interrupts */ + (void) at91_sys_read(AT91_ST_SR); + /* Enable Period Interval Timer interrupt */ at91_sys_write(AT91_ST_IER, AT91_ST_PITS); } diff --git a/arch/arm/mach-at91rm9200/at91sam9260.c b/arch/arm/mach-at91rm9200/at91sam9260.c new file mode 100644 index 00000000000..203f073a53e --- /dev/null +++ b/arch/arm/mach-at91rm9200/at91sam9260.c @@ -0,0 +1,294 @@ +/* + * arch/arm/mach-at91rm9200/at91sam9260.c + * + * Copyright (C) 2006 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/module.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/at91_pmc.h> + +#include "generic.h" +#include "clock.h" + +static struct map_desc at91sam9260_io_desc[] __initdata = { + { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE, + .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE), + .length = AT91SAM9260_SRAM0_SIZE, + .type = MT_DEVICE, + }, { + .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE, + .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE), + .length = AT91SAM9260_SRAM1_SIZE, + .type = MT_DEVICE, + }, +}; + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioA_clk = { + .name = "pioA_clk", + .pmc_mask = 1 << AT91SAM9260_ID_PIOA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioB_clk = { + .name = "pioB_clk", + .pmc_mask = 1 << AT91SAM9260_ID_PIOB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioC_clk = { + .name = "pioC_clk", + .pmc_mask = 1 << AT91SAM9260_ID_PIOC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pmc_mask = 1 << AT91SAM9260_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91SAM9260_ID_US0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91SAM9260_ID_US1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91SAM9260_ID_US2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc_clk = { + .name = "mci_clk", + .pmc_mask = 1 << AT91SAM9260_ID_MCI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udc_clk = { + .name = "udc_clk", + .pmc_mask = 1 << AT91SAM9260_ID_UDP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .pmc_mask = 1 << AT91SAM9260_ID_TWI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91SAM9260_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91SAM9260_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .pmc_mask = 1 << AT91SAM9260_ID_UHP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ether_clk = { + .name = "ether_clk", + .pmc_mask = 1 << AT91SAM9260_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk isi_clk = { + .name = "isi_clk", + .pmc_mask = 1 << AT91SAM9260_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart3_clk = { + .name = "usart3_clk", + .pmc_mask = 1 << AT91SAM9260_ID_US3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart4_clk = { + .name = "usart4_clk", + .pmc_mask = 1 << AT91SAM9260_ID_US4, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart5_clk = { + .name = "usart5_clk", + .pmc_mask = 1 << AT91SAM9260_ID_US5, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioA_clk, + &pioB_clk, + &pioC_clk, + &adc_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &mmc_clk, + &udc_clk, + &twi_clk, + &spi0_clk, + &spi1_clk, + // ssc + // tc0 .. tc2 + &ohci_clk, + ðer_clk, + &isi_clk, + &usart3_clk, + &usart4_clk, + &usart5_clk, + // tc3 .. tc5 + // irq0 .. irq2 +}; + +/* + * The two programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; + +static void __init at91sam9260_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clk_register(&pck0); + clk_register(&pck1); +} + +/* -------------------------------------------------------------------- + * GPIO + * -------------------------------------------------------------------- */ + +static struct at91_gpio_bank at91sam9260_gpio[] = { + { + .id = AT91SAM9260_ID_PIOA, + .offset = AT91_PIOA, + .clock = &pioA_clk, + }, { + .id = AT91SAM9260_ID_PIOB, + .offset = AT91_PIOB, + .clock = &pioB_clk, + }, { + .id = AT91SAM9260_ID_PIOC, + .offset = AT91_PIOC, + .clock = &pioC_clk, + } +}; + +static void at91sam9260_reset(void) +{ +#warning "Implement CPU reset" +} + + +/* -------------------------------------------------------------------- + * AT91SAM9260 processor initialization + * -------------------------------------------------------------------- */ + +void __init at91sam9260_initialize(unsigned long main_clock) +{ + /* Map peripherals */ + iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); + + at91_arch_reset = at91sam9260_reset; + at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) + | (1 << AT91SAM9260_ID_IRQ2); + + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91sam9260_register_clocks(); + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9260_gpio, 3); +} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ + +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller */ + 7, /* System Peripherals */ + 0, /* Parallel IO Controller A */ + 0, /* Parallel IO Controller B */ + 0, /* Parallel IO Controller C */ + 0, /* Analog-to-Digital Converter */ + 6, /* USART 0 */ + 6, /* USART 1 */ + 6, /* USART 2 */ + 0, /* Multimedia Card Interface */ + 4, /* USB Device Port */ + 0, /* Two-Wire Interface */ + 6, /* Serial Peripheral Interface 0 */ + 6, /* Serial Peripheral Interface 1 */ + 5, /* Serial Synchronous Controller */ + 0, + 0, + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ + 3, /* USB Host port */ + 3, /* Ethernet */ + 0, /* Image Sensor Interface */ + 6, /* USART 3 */ + 6, /* USART 4 */ + 6, /* USART 5 */ + 0, /* Timer Counter 3 */ + 0, /* Timer Counter 4 */ + 0, /* Timer Counter 5 */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ +}; + +void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS]) +{ + if (!priority) + priority = at91sam9260_default_irq_priority; + + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} diff --git a/arch/arm/mach-at91rm9200/at91sam9260_devices.c b/arch/arm/mach-at91rm9200/at91sam9260_devices.c new file mode 100644 index 00000000000..a6c596dc451 --- /dev/null +++ b/arch/arm/mach-at91rm9200/at91sam9260_devices.c @@ -0,0 +1,866 @@ +/* + * arch/arm/mach-at91rm9200/at91sam9260_devices.c + * + * Copyright (C) 2006 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <linux/platform_device.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/at91sam926x_mc.h> + +#include "generic.h" + +#define SZ_512 0x00000200 +#define SZ_256 0x00000100 +#define SZ_16 0x00000010 + +/* -------------------------------------------------------------------- + * USB Host + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static u64 ohci_dmamask = 0xffffffffUL; +static struct at91_usbh_data usbh_data; + +static struct resource usbh_resources[] = { + [0] = { + .start = AT91SAM9260_UHP_BASE, + .end = AT91SAM9260_UHP_BASE + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_UHP, + .end = AT91SAM9260_ID_UHP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_usbh_device = { + .name = "at91_ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbh_data, + }, + .resource = usbh_resources, + .num_resources = ARRAY_SIZE(usbh_resources), +}; + +void __init at91_add_device_usbh(struct at91_usbh_data *data) +{ + if (!data) + return; + + usbh_data = *data; + platform_device_register(&at91_usbh_device); +} +#else +void __init at91_add_device_usbh(struct at91_usbh_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * USB Device (Gadget) + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_USB_GADGET_AT91 +static struct at91_udc_data udc_data; + +static struct resource udc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_UDP, + .end = AT91SAM9260_BASE_UDP + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_UDP, + .end = AT91SAM9260_ID_UDP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_udc_device = { + .name = "at91_udc", + .id = -1, + .dev = { + .platform_data = &udc_data, + }, + .resource = udc_resources, + .num_resources = ARRAY_SIZE(udc_resources), +}; + +void __init at91_add_device_udc(struct at91_udc_data *data) +{ + if (!data) + return; + + if (data->vbus_pin) { + at91_set_gpio_input(data->vbus_pin, 0); + at91_set_deglitch(data->vbus_pin, 1); + } + + /* Pullup pin is handled internally by USB device peripheral */ + + udc_data = *data; + platform_device_register(&at91_udc_device); +} +#else +void __init at91_add_device_udc(struct at91_udc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * Ethernet + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) +static u64 eth_dmamask = 0xffffffffUL; +static struct eth_platform_data eth_data; + +static struct resource eth_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_EMAC, + .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_EMAC, + .end = AT91SAM9260_ID_EMAC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_eth_device = { + .name = "macb", + .id = -1, + .dev = { + .dma_mask = ð_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = ð_data, + }, + .resource = eth_resources, + .num_resources = ARRAY_SIZE(eth_resources), +}; + +void __init at91_add_device_eth(struct eth_platform_data *data) +{ + if (!data) + return; + + if (data->phy_irq_pin) { + at91_set_gpio_input(data->phy_irq_pin, 0); + at91_set_deglitch(data->phy_irq_pin, 1); + } + + /* Pins used for MII and RMII */ + at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ + + if (!data->is_rmii) { + at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ + } + + eth_data = *data; + platform_device_register(&at91sam9260_eth_device); +} +#else +void __init at91_add_device_eth(struct eth_platform_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * MMC / SD + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +static u64 mmc_dmamask = 0xffffffffUL; +static struct at91_mmc_data mmc_data; + +static struct resource mmc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_MCI, + .end = AT91SAM9260_BASE_MCI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_MCI, + .end = AT91SAM9260_ID_MCI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_mmc_device = { + .name = "at91_mci", + .id = -1, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &mmc_data, + }, + .resource = mmc_resources, + .num_resources = ARRAY_SIZE(mmc_resources), +}; + +void __init at91_add_device_mmc(struct at91_mmc_data *data) +{ + if (!data) + return; + + /* input/irq */ + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + } + if (data->wp_pin) + at91_set_gpio_input(data->wp_pin, 1); + if (data->vcc_pin) + at91_set_gpio_output(data->vcc_pin, 0); + + /* CLK */ + at91_set_A_periph(AT91_PIN_PA8, 0); + + if (data->slot_b) { + /* CMD */ + at91_set_B_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_B_periph(AT91_PIN_PA0, 1); + if (data->wire4) { + at91_set_B_periph(AT91_PIN_PA5, 1); + at91_set_B_periph(AT91_PIN_PA4, 1); + at91_set_B_periph(AT91_PIN_PA3, 1); + } + } else { + /* CMD */ + at91_set_A_periph(AT91_PIN_PA7, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA6, 1); + if (data->wire4) { + at91_set_A_periph(AT91_PIN_PA9, 1); + at91_set_A_periph(AT91_PIN_PA10, 1); + at91_set_A_periph(AT91_PIN_PA11, 1); + } + } + + mmc_data = *data; + platform_device_register(&at91sam9260_mmc_device); +} +#else +void __init at91_add_device_mmc(struct at91_mmc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * NAND / SmartMedia + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +static struct at91_nand_data nand_data; + +#define NAND_BASE AT91_CHIPSELECT_3 + +static struct resource nand_resources[] = { + { + .start = NAND_BASE, + .end = NAND_BASE + SZ_8M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9260_nand_device = { + .name = "at91_nand", + .id = -1, + .dev = { + .platform_data = &nand_data, + }, + .resource = nand_resources, + .num_resources = ARRAY_SIZE(nand_resources), +}; + +void __init at91_add_device_nand(struct at91_nand_data *data) +{ + unsigned long csa, mode; + + if (!data) + return; + + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); + + /* set the bus interface characteristics */ + at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) + | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + + at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) + | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5)); + + at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); + + if (data->bus_width_16) + mode = AT91_SMC_DBW_16; + else + mode = AT91_SMC_DBW_8; + at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1)); + + /* enable pin */ + if (data->enable_pin) + at91_set_gpio_output(data->enable_pin, 1); + + /* ready/busy pin */ + if (data->rdy_pin) + at91_set_gpio_input(data->rdy_pin, 1); + + /* card detect pin */ + if (data->det_pin) + at91_set_gpio_input(data->det_pin, 1); + + nand_data = *data; + platform_device_register(&at91sam9260_nand_device); +} +#else +void __init at91_add_device_nand(struct at91_nand_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * TWI (i2c) + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) + +static struct resource twi_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_TWI, + .end = AT91SAM9260_BASE_TWI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_TWI, + .end = AT91SAM9260_ID_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_twi_device = { + .name = "at91_i2c", + .id = -1, + .resource = twi_resources, + .num_resources = ARRAY_SIZE(twi_resources), +}; + +void __init at91_add_device_i2c(void) +{ + /* pins used for TWI interface */ + at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ + at91_set_multi_drive(AT91_PIN_PA23, 1); + + at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */ + at91_set_multi_drive(AT91_PIN_PA24, 1); + + platform_device_register(&at91sam9260_twi_device); +} +#else +void __init at91_add_device_i2c(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SPI + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) +static u64 spi_dmamask = 0xffffffffUL; + +static struct resource spi0_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_SPI0, + .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_SPI0, + .end = AT91SAM9260_ID_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_spi0_device = { + .name = "atmel_spi", + .id = 0, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .resource = spi0_resources, + .num_resources = ARRAY_SIZE(spi0_resources), +}; + +static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 }; + +static struct resource spi1_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_SPI1, + .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_SPI1, + .end = AT91SAM9260_ID_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_spi1_device = { + .name = "atmel_spi", + .id = 1, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .resource = spi1_resources, + .num_resources = ARRAY_SIZE(spi1_resources), +}; + +static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; + +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) +{ + int i; + unsigned long cs_pin; + short enable_spi0 = 0; + short enable_spi1 = 0; + + /* Choose SPI chip-selects */ + for (i = 0; i < nr_devices; i++) { + if (devices[i].controller_data) + cs_pin = (unsigned long) devices[i].controller_data; + else if (devices[i].bus_num == 0) + cs_pin = spi0_standard_cs[devices[i].chip_select]; + else + cs_pin = spi1_standard_cs[devices[i].chip_select]; + + if (devices[i].bus_num == 0) + enable_spi0 = 1; + else + enable_spi1 = 1; + + /* enable chip-select pin */ + at91_set_gpio_output(cs_pin, 1); + + /* pass chip-select pin to driver */ + devices[i].controller_data = (void *) cs_pin; + } + + spi_register_board_info(devices, nr_devices); + + /* Configure SPI bus(es) */ + if (enable_spi0) { + at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ + + at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk"); + platform_device_register(&at91sam9260_spi0_device); + } + if (enable_spi1) { + at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */ + at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */ + at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */ + + at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk"); + platform_device_register(&at91sam9260_spi1_device); + } +} +#else +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} +#endif + + +/* -------------------------------------------------------------------- + * LEDs + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_LEDS) +u8 at91_leds_cpu; +u8 at91_leds_timer; + +void __init at91_init_leds(u8 cpu_led, u8 timer_led) +{ + at91_leds_cpu = cpu_led; + at91_leds_timer = timer_led; +} +#else +void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +#endif + + +/* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +#if defined(CONFIG_SERIAL_ATMEL) +static struct resource dbgu_resources[] = { + [0] = { + .start = AT91_VA_BASE_SYS + AT91_DBGU, + .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_SYS, + .end = AT91_ID_SYS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data dbgu_data = { + .use_dma_tx = 0, + .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), +}; + +static struct platform_device at91sam9260_dbgu_device = { + .name = "atmel_usart", + .id = 0, + .dev = { + .platform_data = &dbgu_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = dbgu_resources, + .num_resources = ARRAY_SIZE(dbgu_resources), +}; + +static inline void configure_dbgu_pins(void) +{ + at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ +} + +static struct resource uart0_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_US0, + .end = AT91SAM9260_BASE_US0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_US0, + .end = AT91SAM9260_ID_US0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart0_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9260_uart0_device = { + .name = "atmel_usart", + .id = 1, + .dev = { + .platform_data = &uart0_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart0_resources, + .num_resources = ARRAY_SIZE(uart0_resources), +}; + +static inline void configure_usart0_pins(void) +{ + at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ + at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ + at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ +} + +static struct resource uart1_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_US1, + .end = AT91SAM9260_BASE_US1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_US1, + .end = AT91SAM9260_ID_US1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart1_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9260_uart1_device = { + .name = "atmel_usart", + .id = 2, + .dev = { + .platform_data = &uart1_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart1_resources, + .num_resources = ARRAY_SIZE(uart1_resources), +}; + +static inline void configure_usart1_pins(void) +{ + at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ + at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ +} + +static struct resource uart2_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_US2, + .end = AT91SAM9260_BASE_US2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_US2, + .end = AT91SAM9260_ID_US2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart2_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9260_uart2_device = { + .name = "atmel_usart", + .id = 3, + .dev = { + .platform_data = &uart2_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart2_resources, + .num_resources = ARRAY_SIZE(uart2_resources), +}; + +static inline void configure_usart2_pins(void) +{ + at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ +} + +static struct resource uart3_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_US3, + .end = AT91SAM9260_BASE_US3 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_US3, + .end = AT91SAM9260_ID_US3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart3_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9260_uart3_device = { + .name = "atmel_usart", + .id = 4, + .dev = { + .platform_data = &uart3_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart3_resources, + .num_resources = ARRAY_SIZE(uart3_resources), +}; + +static inline void configure_usart3_pins(void) +{ + at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */ + at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */ +} + +static struct resource uart4_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_US4, + .end = AT91SAM9260_BASE_US4 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_US4, + .end = AT91SAM9260_ID_US4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart4_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9260_uart4_device = { + .name = "atmel_usart", + .id = 5, + .dev = { + .platform_data = &uart4_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart4_resources, + .num_resources = ARRAY_SIZE(uart4_resources), +}; + +static inline void configure_usart4_pins(void) +{ + at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */ + at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */ +} + +static struct resource uart5_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_US5, + .end = AT91SAM9260_BASE_US5 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_US5, + .end = AT91SAM9260_ID_US5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart5_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9260_uart5_device = { + .name = "atmel_usart", + .id = 6, + .dev = { + .platform_data = &uart5_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart5_resources, + .num_resources = ARRAY_SIZE(uart5_resources), +}; + +static inline void configure_usart5_pins(void) +{ + at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */ + at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ +} + +struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +struct platform_device *atmel_default_console_device; /* the serial console device */ + +void __init at91_init_serial(struct at91_uart_config *config) +{ + int i; + + /* Fill in list of supported UARTs */ + for (i = 0; i < config->nr_tty; i++) { + switch (config->tty_map[i]) { + case 0: + configure_usart0_pins(); + at91_uarts[i] = &at91sam9260_uart0_device; + at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart"); + break; + case 1: + configure_usart1_pins(); + at91_uarts[i] = &at91sam9260_uart1_device; + at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart"); + break; + case 2: + configure_usart2_pins(); + at91_uarts[i] = &at91sam9260_uart2_device; + at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart"); + break; + case 3: + configure_usart3_pins(); + at91_uarts[i] = &at91sam9260_uart3_device; + at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart"); + break; + case 4: + configure_usart4_pins(); + at91_uarts[i] = &at91sam9260_uart4_device; + at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart"); + break; + case 5: + configure_usart5_pins(); + at91_uarts[i] = &at91sam9260_uart5_device; + at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart"); + break; + case 6: + configure_dbgu_pins(); + at91_uarts[i] = &at91sam9260_dbgu_device; + at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart"); + break; + default: + continue; + } + at91_uarts[i]->id = i; /* update ID number to mapped ID */ + } + + /* Set serial console device */ + if (config->console_tty < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[config->console_tty]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + +void __init at91_add_device_serial(void) +{ + int i; + + for (i = 0; i < ATMEL_MAX_UART; i++) { + if (at91_uarts[i]) + platform_device_register(at91_uarts[i]); + } +} +#else +void __init at91_init_serial(struct at91_uart_config *config) {} +void __init at91_add_device_serial(void) {} +#endif + + +/* -------------------------------------------------------------------- */ +/* + * These devices are always present and don't need any board-specific + * setup. + */ +static int __init at91_add_standard_devices(void) +{ + return 0; +} + +arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91rm9200/at91sam9261.c b/arch/arm/mach-at91rm9200/at91sam9261.c new file mode 100644 index 00000000000..5a82f35da2e --- /dev/null +++ b/arch/arm/mach-at91rm9200/at91sam9261.c @@ -0,0 +1,289 @@ +/* + * arch/arm/mach-at91rm9200/at91sam9261.c + * + * Copyright (C) 2005 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/module.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/arch/at91sam9261.h> +#include <asm/arch/at91_pmc.h> + +#include "generic.h" +#include "clock.h" + +static struct map_desc at91sam9261_io_desc[] __initdata = { + { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE, + .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE), + .length = AT91SAM9261_SRAM_SIZE, + .type = MT_DEVICE, + }, +}; + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioA_clk = { + .name = "pioA_clk", + .pmc_mask = 1 << AT91SAM9261_ID_PIOA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioB_clk = { + .name = "pioB_clk", + .pmc_mask = 1 << AT91SAM9261_ID_PIOB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioC_clk = { + .name = "pioC_clk", + .pmc_mask = 1 << AT91SAM9261_ID_PIOC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91SAM9261_ID_US0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91SAM9261_ID_US1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91SAM9261_ID_US2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc_clk = { + .name = "mci_clk", + .pmc_mask = 1 << AT91SAM9261_ID_MCI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udc_clk = { + .name = "udc_clk", + .pmc_mask = 1 << AT91SAM9261_ID_UDP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .pmc_mask = 1 << AT91SAM9261_ID_TWI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91SAM9261_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91SAM9261_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .pmc_mask = 1 << AT91SAM9261_ID_UHP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91SAM9261_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioA_clk, + &pioB_clk, + &pioC_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &mmc_clk, + &udc_clk, + &twi_clk, + &spi0_clk, + &spi1_clk, + // ssc 0 .. ssc2 + // tc0 .. tc2 + &ohci_clk, + &lcdc_clk, + // irq0 .. irq2 +}; + +/* + * The four programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 2, +}; +static struct clk pck3 = { + .name = "pck3", + .pmc_mask = AT91_PMC_PCK3, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 3, +}; + +/* HClocks */ +static struct clk hck0 = { + .name = "hck0", + .pmc_mask = AT91_PMC_HCK0, + .type = CLK_TYPE_SYSTEM, + .id = 0, +}; +static struct clk hck1 = { + .name = "hck1", + .pmc_mask = AT91_PMC_HCK1, + .type = CLK_TYPE_SYSTEM, + .id = 1, +}; + +static void __init at91sam9261_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clk_register(&pck0); + clk_register(&pck1); + clk_register(&pck2); + clk_register(&pck3); + + clk_register(&hck0); + clk_register(&hck1); +} + +/* -------------------------------------------------------------------- + * GPIO + * -------------------------------------------------------------------- */ + +static struct at91_gpio_bank at91sam9261_gpio[] = { + { + .id = AT91SAM9261_ID_PIOA, + .offset = AT91_PIOA, + .clock = &pioA_clk, + }, { + .id = AT91SAM9261_ID_PIOB, + .offset = AT91_PIOB, + .clock = &pioB_clk, + }, { + .id = AT91SAM9261_ID_PIOC, + .offset = AT91_PIOC, + .clock = &pioC_clk, + } +}; + +static void at91sam9261_reset(void) +{ +#warning "Implement CPU reset" +} + + +/* -------------------------------------------------------------------- + * AT91SAM9261 processor initialization + * -------------------------------------------------------------------- */ + +void __init at91sam9261_initialize(unsigned long main_clock) +{ + /* Map peripherals */ + iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); + + at91_arch_reset = at91sam9261_reset; + at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) + | (1 << AT91SAM9261_ID_IRQ2); + + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91sam9261_register_clocks(); + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9261_gpio, 3); +} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ + +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller */ + 7, /* System Peripherals */ + 0, /* Parallel IO Controller A */ + 0, /* Parallel IO Controller B */ + 0, /* Parallel IO Controller C */ + 0, + 6, /* USART 0 */ + 6, /* USART 1 */ + 6, /* USART 2 */ + 0, /* Multimedia Card Interface */ + 4, /* USB Device Port */ + 0, /* Two-Wire Interface */ + 6, /* Serial Peripheral Interface 0 */ + 6, /* Serial Peripheral Interface 1 */ + 5, /* Serial Synchronous Controller 0 */ + 5, /* Serial Synchronous Controller 1 */ + 5, /* Serial Synchronous Controller 2 */ + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ + 3, /* USB Host port */ + 3, /* LCD Controller */ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ +}; + +void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS]) +{ + if (!priority) + priority = at91sam9261_default_irq_priority; + + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} diff --git a/arch/arm/mach-at91rm9200/at91sam9261_devices.c b/arch/arm/mach-at91rm9200/at91sam9261_devices.c new file mode 100644 index 00000000000..ed1d79081b3 --- /dev/null +++ b/arch/arm/mach-at91rm9200/at91sam9261_devices.c @@ -0,0 +1,741 @@ +/* + * arch/arm/mach-at91rm9200/at91sam9261_devices.c + * + * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <linux/platform_device.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91sam9261.h> +#include <asm/arch/at91sam9261_matrix.h> +#include <asm/arch/at91sam926x_mc.h> + +#include "generic.h" + +#define SZ_512 0x00000200 +#define SZ_256 0x00000100 +#define SZ_16 0x00000010 + +/* -------------------------------------------------------------------- + * USB Host + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static u64 ohci_dmamask = 0xffffffffUL; +static struct at91_usbh_data usbh_data; + +static struct resource usbh_resources[] = { + [0] = { + .start = AT91SAM9261_UHP_BASE, + .end = AT91SAM9261_UHP_BASE + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_UHP, + .end = AT91SAM9261_ID_UHP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_usbh_device = { + .name = "at91_ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbh_data, + }, + .resource = usbh_resources, + .num_resources = ARRAY_SIZE(usbh_resources), +}; + +void __init at91_add_device_usbh(struct at91_usbh_data *data) +{ + if (!data) + return; + + usbh_data = *data; + platform_device_register(&at91sam9261_usbh_device); +} +#else +void __init at91_add_device_usbh(struct at91_usbh_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * USB Device (Gadget) + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_USB_GADGET_AT91 +static struct at91_udc_data udc_data; + +static struct resource udc_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_UDP, + .end = AT91SAM9261_BASE_UDP + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_UDP, + .end = AT91SAM9261_ID_UDP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_udc_device = { + .name = "at91_udc", + .id = -1, + .dev = { + .platform_data = &udc_data, + }, + .resource = udc_resources, + .num_resources = ARRAY_SIZE(udc_resources), +}; + +void __init at91_add_device_udc(struct at91_udc_data *data) +{ + unsigned long x; + + if (!data) + return; + + if (data->vbus_pin) { + at91_set_gpio_input(data->vbus_pin, 0); + at91_set_deglitch(data->vbus_pin, 1); + } + + /* Pullup pin is handled internally */ + x = at91_sys_read(AT91_MATRIX_USBPUCR); + at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON); + + udc_data = *data; + platform_device_register(&at91sam9261_udc_device); +} +#else +void __init at91_add_device_udc(struct at91_udc_data *data) {} +#endif + +/* -------------------------------------------------------------------- + * MMC / SD + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +static u64 mmc_dmamask = 0xffffffffUL; +static struct at91_mmc_data mmc_data; + +static struct resource mmc_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_MCI, + .end = AT91SAM9261_BASE_MCI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_MCI, + .end = AT91SAM9261_ID_MCI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_mmc_device = { + .name = "at91_mci", + .id = -1, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &mmc_data, + }, + .resource = mmc_resources, + .num_resources = ARRAY_SIZE(mmc_resources), +}; + +void __init at91_add_device_mmc(struct at91_mmc_data *data) +{ + if (!data) + return; + + /* input/irq */ + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + } + if (data->wp_pin) + at91_set_gpio_input(data->wp_pin, 1); + if (data->vcc_pin) + at91_set_gpio_output(data->vcc_pin, 0); + + /* CLK */ + at91_set_B_periph(AT91_PIN_PA2, 0); + + /* CMD */ + at91_set_B_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_B_periph(AT91_PIN_PA0, 1); + if (data->wire4) { + at91_set_B_periph(AT91_PIN_PA4, 1); + at91_set_B_periph(AT91_PIN_PA5, 1); + at91_set_B_periph(AT91_PIN_PA6, 1); + } + + mmc_data = *data; + platform_device_register(&at91sam9261_mmc_device); +} +#else +void __init at91_add_device_mmc(struct at91_mmc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * NAND / SmartMedia + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +static struct at91_nand_data nand_data; + +#define NAND_BASE AT91_CHIPSELECT_3 + +static struct resource nand_resources[] = { + { + .start = NAND_BASE, + .end = NAND_BASE + SZ_256M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91_nand_device = { + .name = "at91_nand", + .id = -1, + .dev = { + .platform_data = &nand_data, + }, + .resource = nand_resources, + .num_resources = ARRAY_SIZE(nand_resources), +}; + +void __init at91_add_device_nand(struct at91_nand_data *data) +{ + unsigned long csa, mode; + + if (!data) + return; + + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); + + /* set the bus interface characteristics */ + at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) + | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + + at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) + | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5)); + + at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); + + if (data->bus_width_16) + mode = AT91_SMC_DBW_16; + else + mode = AT91_SMC_DBW_8; + at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1)); + + /* enable pin */ + if (data->enable_pin) + at91_set_gpio_output(data->enable_pin, 1); + + /* ready/busy pin */ + if (data->rdy_pin) + at91_set_gpio_input(data->rdy_pin, 1); + + /* card detect pin */ + if (data->det_pin) + at91_set_gpio_input(data->det_pin, 1); + + at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ + at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ + + nand_data = *data; + platform_device_register(&at91_nand_device); +} + +#else +void __init at91_add_device_nand(struct at91_nand_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * TWI (i2c) + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) + +static struct resource twi_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_TWI, + .end = AT91SAM9261_BASE_TWI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_TWI, + .end = AT91SAM9261_ID_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_twi_device = { + .name = "at91_i2c", + .id = -1, + .resource = twi_resources, + .num_resources = ARRAY_SIZE(twi_resources), +}; + +void __init at91_add_device_i2c(void) +{ + /* pins used for TWI interface */ + at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */ + at91_set_multi_drive(AT91_PIN_PA7, 1); + + at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */ + at91_set_multi_drive(AT91_PIN_PA8, 1); + + platform_device_register(&at91sam9261_twi_device); +} +#else +void __init at91_add_device_i2c(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SPI + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) +static u64 spi_dmamask = 0xffffffffUL; + +static struct resource spi0_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SPI0, + .end = AT91SAM9261_BASE_SPI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SPI0, + .end = AT91SAM9261_ID_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_spi0_device = { + .name = "atmel_spi", + .id = 0, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .resource = spi0_resources, + .num_resources = ARRAY_SIZE(spi0_resources), +}; + +static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; + +static struct resource spi1_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SPI1, + .end = AT91SAM9261_BASE_SPI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SPI1, + .end = AT91SAM9261_ID_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_spi1_device = { + .name = "atmel_spi", + .id = 1, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .resource = spi1_resources, + .num_resources = ARRAY_SIZE(spi1_resources), +}; + +static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 }; + +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) +{ + int i; + unsigned long cs_pin; + short enable_spi0 = 0; + short enable_spi1 = 0; + + /* Choose SPI chip-selects */ + for (i = 0; i < nr_devices; i++) { + if (devices[i].controller_data) + cs_pin = (unsigned long) devices[i].controller_data; + else if (devices[i].bus_num == 0) + cs_pin = spi0_standard_cs[devices[i].chip_select]; + else + cs_pin = spi1_standard_cs[devices[i].chip_select]; + + if (devices[i].bus_num == 0) + enable_spi0 = 1; + else + enable_spi1 = 1; + + /* enable chip-select pin */ + at91_set_gpio_output(cs_pin, 1); + + /* pass chip-select pin to driver */ + devices[i].controller_data = (void *) cs_pin; + } + + spi_register_board_info(devices, nr_devices); + + /* Configure SPI bus(es) */ + if (enable_spi0) { + at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk"); + platform_device_register(&at91sam9261_spi0_device); + } + if (enable_spi1) { + at91_set_A_periph(AT91_PIN_PB30, 0); /* SPI1_MISO */ + at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */ + + at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk"); + platform_device_register(&at91sam9261_spi1_device); + } +} +#else +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} +#endif + + +/* -------------------------------------------------------------------- + * LCD Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE) +static u64 lcdc_dmamask = 0xffffffffUL; +static struct at91fb_info lcdc_data; + +static struct resource lcdc_resources[] = { + [0] = { + .start = AT91SAM9261_LCDC_BASE, + .end = AT91SAM9261_LCDC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_LCDC, + .end = AT91SAM9261_ID_LCDC, + .flags = IORESOURCE_IRQ, + }, +#if defined(CONFIG_FB_INTSRAM) + [2] = { + .start = AT91SAM9261_SRAM_BASE, + .end = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device at91_lcdc_device = { + .name = "at91-fb", + .id = 0, + .dev = { + .dma_mask = &lcdc_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &lcdc_data, + }, + .resource = lcdc_resources, + .num_resources = ARRAY_SIZE(lcdc_resources), +}; + +void __init at91_add_device_lcdc(struct at91fb_info *data) +{ + if (!data) { + return; + } + + at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ + at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */ + at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */ + at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */ + at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */ + at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */ + at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ + at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ + at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ + + lcdc_data = *data; + platform_device_register(&at91_lcdc_device); +} +#else +void __init at91_add_device_lcdc(struct at91fb_info *data) {} +#endif + + +/* -------------------------------------------------------------------- + * LEDs + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_LEDS) +u8 at91_leds_cpu; +u8 at91_leds_timer; + +void __init at91_init_leds(u8 cpu_led, u8 timer_led) +{ + at91_leds_cpu = cpu_led; + at91_leds_timer = timer_led; +} +#else +void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +#endif + + +/* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SERIAL_ATMEL) +static struct resource dbgu_resources[] = { + [0] = { + .start = AT91_VA_BASE_SYS + AT91_DBGU, + .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_SYS, + .end = AT91_ID_SYS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data dbgu_data = { + .use_dma_tx = 0, + .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), +}; + +static struct platform_device at91sam9261_dbgu_device = { + .name = "atmel_usart", + .id = 0, + .dev = { + .platform_data = &dbgu_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = dbgu_resources, + .num_resources = ARRAY_SIZE(dbgu_resources), +}; + +static inline void configure_dbgu_pins(void) +{ + at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */ +} + +static struct resource uart0_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_US0, + .end = AT91SAM9261_BASE_US0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_US0, + .end = AT91SAM9261_ID_US0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart0_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9261_uart0_device = { + .name = "atmel_usart", + .id = 1, + .dev = { + .platform_data = &uart0_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart0_resources, + .num_resources = ARRAY_SIZE(uart0_resources), +}; + +static inline void configure_usart0_pins(void) +{ + at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ + at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ + at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ +} + +static struct resource uart1_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_US1, + .end = AT91SAM9261_BASE_US1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_US1, + .end = AT91SAM9261_ID_US1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart1_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9261_uart1_device = { + .name = "atmel_usart", + .id = 2, + .dev = { + .platform_data = &uart1_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart1_resources, + .num_resources = ARRAY_SIZE(uart1_resources), +}; + +static inline void configure_usart1_pins(void) +{ + at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ +} + +static struct resource uart2_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_US2, + .end = AT91SAM9261_BASE_US2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_US2, + .end = AT91SAM9261_ID_US2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart2_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9261_uart2_device = { + .name = "atmel_usart", + .id = 3, + .dev = { + .platform_data = &uart2_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart2_resources, + .num_resources = ARRAY_SIZE(uart2_resources), +}; + +static inline void configure_usart2_pins(void) +{ + at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ + at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ +} + +struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +struct platform_device *atmel_default_console_device; /* the serial console device */ + +void __init at91_init_serial(struct at91_uart_config *config) +{ + int i; + + /* Fill in list of supported UARTs */ + for (i = 0; i < config->nr_tty; i++) { + switch (config->tty_map[i]) { + case 0: + configure_usart0_pins(); + at91_uarts[i] = &at91sam9261_uart0_device; + at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart"); + break; + case 1: + configure_usart1_pins(); + at91_uarts[i] = &at91sam9261_uart1_device; + at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart"); + break; + case 2: + configure_usart2_pins(); + at91_uarts[i] = &at91sam9261_uart2_device; + at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart"); + break; + case 3: + configure_dbgu_pins(); + at91_uarts[i] = &at91sam9261_dbgu_device; + at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart"); + break; + default: + continue; + } + at91_uarts[i]->id = i; /* update ID number to mapped ID */ + } + + /* Set serial console device */ + if (config->console_tty < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[config->console_tty]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + +void __init at91_add_device_serial(void) +{ + int i; + + for (i = 0; i < ATMEL_MAX_UART; i++) { + if (at91_uarts[i]) + platform_device_register(at91_uarts[i]); + } +} +#else +void __init at91_init_serial(struct at91_uart_config *config) {} +void __init at91_add_device_serial(void) {} +#endif + + +/* -------------------------------------------------------------------- */ + +/* + * These devices are always present and don't need any board-specific + * setup. + */ +static int __init at91_add_standard_devices(void) +{ + return 0; +} + +arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91rm9200/at91sam926x_time.c b/arch/arm/mach-at91rm9200/at91sam926x_time.c new file mode 100644 index 00000000000..99df5f6ee42 --- /dev/null +++ b/arch/arm/mach-at91rm9200/at91sam926x_time.c @@ -0,0 +1,114 @@ +/* + * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c + * + * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France + * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/time.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mach/time.h> + +#include <asm/arch/at91_pit.h> + + +#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) +#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) + +/* + * Returns number of microseconds since last timer interrupt. Note that interrupts + * will have been disabled by do_gettimeofday() + * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. + * 'tick' is usecs per jiffy (linux/timex.h). + */ +static unsigned long at91sam926x_gettimeoffset(void) +{ + unsigned long elapsed; + unsigned long t = at91_sys_read(AT91_PIT_PIIR); + + elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */ + + return (unsigned long)(elapsed * 1000000) / LATCH; +} + +/* + * IRQ handler for the timer. + */ +static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id) +{ + volatile long nr_ticks; + + if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */ + write_seqlock(&xtime_lock); + + /* Get number to ticks performed before interrupt and clear PIT interrupt */ + nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); + do { + timer_tick(); + nr_ticks--; + } while (nr_ticks); + + write_sequnlock(&xtime_lock); + return IRQ_HANDLED; + } else + return IRQ_NONE; /* not handled */ +} + +static struct irqaction at91sam926x_timer_irq = { + .name = "at91_tick", + .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER, + .handler = at91sam926x_timer_interrupt +}; + +void at91sam926x_timer_reset(void) +{ + /* Disable timer */ + at91_sys_write(AT91_PIT_MR, 0); + + /* Clear any pending interrupts */ + (void) at91_sys_read(AT91_PIT_PIVR); + + /* Set Period Interval timer and enable its interrupt */ + at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN); +} + +/* + * Set up timer interrupt. + */ +void __init at91sam926x_timer_init(void) +{ + /* Initialize and enable the timer */ + at91sam926x_timer_reset(); + + /* Make IRQs happen for the system timer. */ + setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq); +} + +#ifdef CONFIG_PM +static void at91sam926x_timer_suspend(void) +{ + /* Disable timer */ + at91_sys_write(AT91_PIT_MR, 0); +} +#else +#define at91sam926x_timer_suspend NULL +#endif + +struct sys_timer at91sam926x_timer = { + .init = at91sam926x_timer_init, + .offset = at91sam926x_gettimeoffset, + .suspend = at91sam926x_timer_suspend, + .resume = at91sam926x_timer_reset, +}; + diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91rm9200/board-carmeva.c index 98208740e7c..654f0379550 100644 --- a/arch/arm/mach-at91rm9200/board-carmeva.c +++ b/arch/arm/mach-at91rm9200/board-carmeva.c @@ -65,7 +65,6 @@ static void __init carmeva_init_irq(void) at91rm9200_init_interrupts(NULL); } - static struct at91_eth_data __initdata carmeva_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -89,8 +88,33 @@ static struct at91_udc_data __initdata carmeva_udc_data = { // }; static struct at91_mmc_data __initdata carmeva_mmc_data = { - .is_b = 0, + .slot_b = 0, .wire4 = 1, + .det_pin = AT91_PIN_PB10, + .wp_pin = AT91_PIN_PC14, +}; + +static struct spi_board_info carmeva_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + }, + { /* User accessable spi - cs1 (250KHz) */ + .modalias = "spi-cs1", + .chip_select = 1, + .max_speed_hz = 250 * 1000, + }, + { /* User accessable spi - cs2 (1MHz) */ + .modalias = "spi-cs2", + .chip_select = 2, + .max_speed_hz = 1 * 1000 * 1000, + }, + { /* User accessable spi - cs3 (10MHz) */ + .modalias = "spi-cs3", + .chip_select = 3, + .max_speed_hz = 10 * 1000 * 1000, + }, }; static void __init carmeva_board_init(void) @@ -105,10 +129,10 @@ static void __init carmeva_board_init(void) at91_add_device_udc(&carmeva_udc_data); /* I2C */ at91_add_device_i2c(); + /* SPI */ + at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices)); /* Compact Flash */ // at91_add_device_cf(&carmeva_cf_data); - /* SPI */ -// at91_add_device_spi(NULL, 0); /* MMC */ at91_add_device_mmc(&carmeva_mmc_data); } diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c index 8eeae491ce7..b8bb8052607 100644 --- a/arch/arm/mach-at91rm9200/board-csb337.c +++ b/arch/arm/mach-at91rm9200/board-csb337.c @@ -99,7 +99,7 @@ static struct at91_cf_data __initdata csb337_cf_data = { static struct at91_mmc_data __initdata csb337_mmc_data = { .det_pin = AT91_PIN_PD5, - .is_b = 0, + .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PD6, }; diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c index c699f3984d4..7522bf91bce 100644 --- a/arch/arm/mach-at91rm9200/board-dk.c +++ b/arch/arm/mach-at91rm9200/board-dk.c @@ -27,6 +27,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/mtd/physmap.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -39,6 +40,7 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> +#include <asm/arch/at91rm9200_mc.h> #include "generic.h" @@ -93,7 +95,7 @@ static struct at91_cf_data __initdata dk_cf_data = { }; static struct at91_mmc_data __initdata dk_mmc_data = { - .is_b = 0, + .slot_b = 0, .wire4 = 1, }; @@ -145,6 +147,30 @@ static struct at91_nand_data __initdata dk_nand_data = { .partition_info = nand_partitions, }; +#define DK_FLASH_BASE AT91_CHIPSELECT_0 +#define DK_FLASH_SIZE 0x200000 + +static struct physmap_flash_data dk_flash_data = { + .width = 2, +}; + +static struct resource dk_flash_resource = { + .start = DK_FLASH_BASE, + .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device dk_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &dk_flash_data, + }, + .resource = &dk_flash_resource, + .num_resources = 1, +}; + + static void __init dk_board_init(void) { /* Serial */ @@ -172,6 +198,8 @@ static void __init dk_board_init(void) #endif /* NAND */ at91_add_device_nand(&dk_nand_data); + /* NOR Flash */ + platform_device_register(&dk_flash); /* VGA */ // dk_add_device_video(); } diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91rm9200/board-eb9200.c index 65e867ba2df..80b72cf7264 100644 --- a/arch/arm/mach-at91rm9200/board-eb9200.c +++ b/arch/arm/mach-at91rm9200/board-eb9200.c @@ -87,7 +87,7 @@ static struct at91_cf_data __initdata eb9200_cf_data = { }; static struct at91_mmc_data __initdata eb9200_mmc_data = { - .is_b = 0, + .slot_b = 0, .wire4 = 1, }; diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c index 830eb793217..c4fdb415f20 100644 --- a/arch/arm/mach-at91rm9200/board-ek.c +++ b/arch/arm/mach-at91rm9200/board-ek.c @@ -27,6 +27,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/mtd/physmap.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -39,6 +40,7 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> +#include <asm/arch/at91rm9200_mc.h> #include "generic.h" @@ -87,7 +89,7 @@ static struct at91_udc_data __initdata ek_udc_data = { static struct at91_mmc_data __initdata ek_mmc_data = { .det_pin = AT91_PIN_PB27, - .is_b = 0, + .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PA17, }; @@ -107,6 +109,30 @@ static struct spi_board_info ek_spi_devices[] = { #endif }; +#define EK_FLASH_BASE AT91_CHIPSELECT_0 +#define EK_FLASH_SIZE 0x200000 + +static struct physmap_flash_data ek_flash_data = { + .width = 2, +}; + +static struct resource ek_flash_resource = { + .start = EK_FLASH_BASE, + .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ek_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ek_flash_data, + }, + .resource = &ek_flash_resource, + .num_resources = 1, +}; + + static void __init ek_board_init(void) { /* Serial */ @@ -130,6 +156,8 @@ static void __init ek_board_init(void) at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(&ek_mmc_data); #endif + /* NOR Flash */ + platform_device_register(&ek_flash); /* VGA */ // ek_add_device_video(); } diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c index 35a954a44b1..759d8191854 100644 --- a/arch/arm/mach-at91rm9200/board-kb9202.c +++ b/arch/arm/mach-at91rm9200/board-kb9202.c @@ -84,7 +84,7 @@ static struct at91_udc_data __initdata kb9202_udc_data = { static struct at91_mmc_data __initdata kb9202_mmc_data = { .det_pin = AT91_PIN_PB2, - .is_b = 0, + .slot_b = 0, .wire4 = 1, }; diff --git a/arch/arm/mach-at91rm9200/board-sam9260ek.c b/arch/arm/mach-at91rm9200/board-sam9260ek.c new file mode 100644 index 00000000000..ffca9bdec37 --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-sam9260ek.c @@ -0,0 +1,201 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-ek.c + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91sam926x_mc.h> + +#include "generic.h" + + +/* + * Serial port configuration. + * 0 .. 5 = USART0 .. USART5 + * 6 = DBGU + */ +static struct at91_uart_config __initdata ek_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 3, + .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */ +}; + +static void __init ek_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* Setup the serial ports and console */ + at91_init_serial(&ek_uart_config); +} + +static void __init ek_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + + +/* + * USB Host port + */ +static struct at91_usbh_data __initdata ek_usbh_data = { + .ports = 2, +}; + +/* + * USB Device port + */ +static struct at91_udc_data __initdata ek_udc_data = { + .vbus_pin = AT91_PIN_PC5, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + + +/* + * SPI devices. + */ +static struct spi_board_info ek_spi_devices[] = { +#if !defined(CONFIG_MMC_AT91) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#endif +#endif +#if defined(CONFIG_SND_AT73C213) + { /* AT73C213 DAC */ + .modalias = "snd_at73c213", + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 1, + }, +#endif +}; + + +/* + * MACB Ethernet device + */ +static struct __initdata eth_platform_data ek_macb_data = { + .is_rmii = 1, +}; + + +/* + * NAND flash + */ +static struct mtd_partition __initdata ek_nand_partition[] = { + { + .name = "Partition 1", + .offset = 0, + .size = 256 * 1024, + }, + { + .name = "Partition 2", + .offset = 256 * 1024, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(ek_nand_partition); + return ek_nand_partition; +} + +static struct at91_nand_data __initdata ek_nand_data = { + .ale = 21, + .cle = 22, +// .det_pin = ... not connected + .rdy_pin = AT91_PIN_PC13, + .enable_pin = AT91_PIN_PC14, + .partition_info = nand_partitions, +#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) + .bus_width_16 = 1, +#else + .bus_width_16 = 0, +#endif +}; + + +/* + * MCI (SD/MMC) + */ +static struct at91_mmc_data __initdata ek_mmc_data = { + .slot_b = 1, + .wire4 = 1, +// .det_pin = ... not connected +// .wp_pin = ... not connected +// .vcc_pin = ... not connected +}; + +static void __init ek_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&ek_usbh_data); + /* USB Device */ + at91_add_device_udc(&ek_udc_data); + /* SPI */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); + /* NAND */ + at91_add_device_nand(&ek_nand_data); + /* Ethernet */ + at91_add_device_eth(&ek_macb_data); + /* MMC */ + at91_add_device_mmc(&ek_mmc_data); +} + +MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") + /* Maintainer: Atmel */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = ek_map_io, + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91rm9200/board-sam9261ek.c b/arch/arm/mach-at91rm9200/board-sam9261ek.c new file mode 100644 index 00000000000..30b490d8886 --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-sam9261ek.c @@ -0,0 +1,259 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-ek.c + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/dm9000.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91sam926x_mc.h> + +#include "generic.h" + + +/* + * Serial port configuration. + * 0 .. 2 = USART0 .. USART2 + * 3 = DBGU + */ +static struct at91_uart_config __initdata ek_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 1, + .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */ +}; + +static void __init ek_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9261_initialize(18432000); + + /* Setup the serial ports and console */ + at91_init_serial(&ek_uart_config); +} + +static void __init ek_init_irq(void) +{ + at91sam9261_init_interrupts(NULL); +} + + +/* + * DM9000 ethernet device + */ +#if defined(CONFIG_DM9000) +static struct resource at91sam9261_dm9000_resource[] = { + [0] = { + .start = AT91_CHIPSELECT_2, + .end = AT91_CHIPSELECT_2 + 3, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = AT91_CHIPSELECT_2 + 0x44, + .end = AT91_CHIPSELECT_2 + 0xFF, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = AT91_PIN_PC11, + .end = AT91_PIN_PC11, + .flags = IORESOURCE_IRQ + } +}; + +static struct dm9000_plat_data dm9000_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device at91sam9261_dm9000_device = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(at91sam9261_dm9000_resource), + .resource = at91sam9261_dm9000_resource, + .dev = { + .platform_data = &dm9000_platdata, + } +}; + +static void __init ek_add_device_dm9000(void) +{ + /* + * Configure Chip-Select 2 on SMC for the DM9000. + * Note: These timings were calculated for MASTER_CLOCK = 100000000 + * according to the DM9000 timings. + */ + at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8)); + at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); + at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); + + /* Configure Reset signal as output */ + at91_set_gpio_output(AT91_PIN_PC10, 0); + + /* Configure Interrupt pin as input, no pull-up */ + at91_set_gpio_input(AT91_PIN_PC11, 0); + + platform_device_register(&at91sam9261_dm9000_device); +} +#else +static void __init ek_add_device_dm9000(void) {} +#endif /* CONFIG_DM9000 */ + + +/* + * USB Host Port + */ +static struct at91_usbh_data __initdata ek_usbh_data = { + .ports = 2, +}; + + +/* + * USB Device Port + */ +static struct at91_udc_data __initdata ek_udc_data = { + .vbus_pin = AT91_PIN_PB29, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + + +/* + * MCI (SD/MMC) + */ +static struct at91_mmc_data __initdata ek_mmc_data = { + .wire4 = 1, +// .det_pin = ... not connected +// .wp_pin = ... not connected +// .vcc_pin = ... not connected +}; + + +/* + * NAND flash + */ +static struct mtd_partition __initdata ek_nand_partition[] = { + { + .name = "Partition 1", + .offset = 0, + .size = 256 * 1024, + }, + { + .name = "Partition 2", + .offset = 256 * 1024 , + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(ek_nand_partition); + return ek_nand_partition; +} + +static struct at91_nand_data __initdata ek_nand_data = { + .ale = 22, + .cle = 21, +// .det_pin = ... not connected + .rdy_pin = AT91_PIN_PC15, + .enable_pin = AT91_PIN_PC14, + .partition_info = nand_partitions, +#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) + .bus_width_16 = 1, +#else + .bus_width_16 = 0, +#endif +}; + +/* + * SPI devices + */ +static struct spi_board_info ek_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) + { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */ + .modalias = "mtd_dataflash", + .chip_select = 3, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#elif defined(CONFIG_SND_AT73C213) + { /* AT73C213 DAC */ + .modalias = "snd_at73c213", + .chip_select = 3, + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, + }, +#endif +}; + + +static void __init ek_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&ek_usbh_data); + /* USB Device */ + at91_add_device_udc(&ek_udc_data); + /* I2C */ + at91_add_device_i2c(); + /* NAND */ + at91_add_device_nand(&ek_nand_data); + /* DM9000 ethernet */ + ek_add_device_dm9000(); + + /* spi0 and mmc/sd share the same PIO pins */ +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) + /* SPI */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); +#else + /* MMC */ + at91_add_device_mmc(&ek_mmc_data); +#endif +} + +MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") + /* Maintainer: Atmel */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = ek_map_io, + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c index a43b061a7c8..4dee21fefe5 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91rm9200/clock.c @@ -28,6 +28,8 @@ #include <asm/mach-types.h> #include <asm/hardware.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/cpu.h> #include "clock.h" @@ -41,6 +43,7 @@ #define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY) #define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE) #define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL) +#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM) static LIST_HEAD(clocks); @@ -114,13 +117,11 @@ static void pmc_sys_mode(struct clk *clk, int is_on) static struct clk udpck = { .name = "udpck", .parent = &pllb, - .pmc_mask = AT91_PMC_UDP, .mode = pmc_sys_mode, }; static struct clk uhpck = { .name = "uhpck", .parent = &pllb, - .pmc_mask = AT91_PMC_UHP, .mode = pmc_sys_mode, }; @@ -434,6 +435,12 @@ int __init clk_register(struct clk *clk) clk->mode = pmc_periph_mode; list_add_tail(&clk->node, &clocks); } + else if (clk_is_sys(clk)) { + clk->parent = &mck; + clk->mode = pmc_sys_mode; + + list_add_tail(&clk->node, &clocks); + } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS else if (clk_is_programmable(clk)) { clk->mode = pmc_sys_mode; @@ -586,9 +593,21 @@ int __init at91_clock_init(unsigned long main_clock) */ at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP); + if (cpu_is_at91rm9200()) { + uhpck.pmc_mask = AT91RM9200_PMC_UHP; + udpck.pmc_mask = AT91RM9200_PMC_UDP; + at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP); + at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); + } else if (cpu_is_at91sam9260()) { + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + udpck.pmc_mask = AT91SAM926x_PMC_UDP; + at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP); + } else if (cpu_is_at91sam9261()) { + uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0); + udpck.pmc_mask = AT91SAM926x_PMC_UDP; + at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP); + } at91_sys_write(AT91_CKGR_PLLBR, 0); - at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP); udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); diff --git a/arch/arm/mach-at91rm9200/clock.h b/arch/arm/mach-at91rm9200/clock.h index 0592e662ab3..b5c7a2eb2d1 100644 --- a/arch/arm/mach-at91rm9200/clock.h +++ b/arch/arm/mach-at91rm9200/clock.h @@ -10,6 +10,7 @@ #define CLK_TYPE_PLL 0x2 #define CLK_TYPE_PROGRAMMABLE 0x4 #define CLK_TYPE_PERIPHERAL 0x8 +#define CLK_TYPE_SYSTEM 0x10 struct clk { diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h index 694e411e285..8c4d5a77d48 100644 --- a/arch/arm/mach-at91rm9200/generic.h +++ b/arch/arm/mach-at91rm9200/generic.h @@ -10,14 +10,19 @@ /* Processors */ extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); +extern void __init at91sam9260_initialize(unsigned long main_clock); +extern void __init at91sam9261_initialize(unsigned long main_clock); /* Interrupts */ extern void __init at91rm9200_init_interrupts(unsigned int priority[]); +extern void __init at91sam9260_init_interrupts(unsigned int priority[]); +extern void __init at91sam9261_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ struct sys_timer; extern struct sys_timer at91rm9200_timer; +extern struct sys_timer at91sam926x_timer; /* Clocks */ extern int __init at91_clock_init(unsigned long main_clock); @@ -39,3 +44,6 @@ struct at91_gpio_bank { }; extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks); extern void __init at91_gpio_irq_setup(void); + +extern void (*at91_arch_reset)(void); +extern int at91_extern_irq; diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index 7467d644f0a..3f188508c39 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -19,6 +19,8 @@ #include <asm/io.h> #include <asm/hardware.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> #include "generic.h" @@ -332,10 +334,10 @@ static struct irq_chip gpio_irqchip = { .set_wake = gpio_irq_set_wake, }; -static void gpio_irq_handler(unsigned irq, struct irqdesc *desc) +static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { unsigned pin; - struct irqdesc *gpio; + struct irq_desc *gpio; void __iomem *pio; u32 isr; @@ -396,7 +398,7 @@ void __init at91_gpio_irq_setup(void) __raw_writel(~0, controller + PIO_IDR); set_irq_data(id, (void *) pin); - set_irq_chipdata(id, controller); + set_irq_chip_data(id, controller); for (i = 0; i < 32; i++, pin++) { /* @@ -404,7 +406,7 @@ void __init at91_gpio_irq_setup(void) * shorter, and the AIC handles interupts sanely. */ set_irq_chip(pin, &gpio_irqchip); - set_irq_handler(pin, do_simple_IRQ); + set_irq_handler(pin, handle_simple_irq); set_irq_flags(pin, IRQF_VALID); } diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c index 3e488117ca9..2148daafd29 100644 --- a/arch/arm/mach-at91rm9200/irq.c +++ b/arch/arm/mach-at91rm9200/irq.c @@ -47,6 +47,10 @@ static void at91_aic_unmask_irq(unsigned int irq) at91_sys_write(AT91_AIC_IECR, 1 << irq); } +unsigned int at91_extern_irq; + +#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq) + static int at91_aic_set_type(unsigned irq, unsigned type) { unsigned int smr, srctype; @@ -59,14 +63,16 @@ static int at91_aic_set_type(unsigned irq, unsigned type) srctype = AT91_AIC_SRCTYPE_RISING; break; case IRQT_LOW: - if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */ + if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */ + srctype = AT91_AIC_SRCTYPE_LOW; + else return -EINVAL; - srctype = AT91_AIC_SRCTYPE_LOW; break; case IRQT_FALLING: - if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */ + if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */ + srctype = AT91_AIC_SRCTYPE_FALLING; + else return -EINVAL; - srctype = AT91_AIC_SRCTYPE_FALLING; break; default: return -EINVAL; @@ -139,7 +145,7 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); set_irq_chip(i, &at91_aic_chip); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */ diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c index 32c95d8eaac..67aa5572a3e 100644 --- a/arch/arm/mach-at91rm9200/pm.c +++ b/arch/arm/mach-at91rm9200/pm.c @@ -26,7 +26,10 @@ #include <asm/mach/irq.h> #include <asm/mach-types.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91rm9200_mc.h> #include <asm/arch/gpio.h> +#include <asm/arch/cpu.h> #include "generic.h" @@ -68,9 +71,15 @@ static int at91_pm_verify_clocks(void) scsr = at91_sys_read(AT91_PMC_SCSR); /* USB must not be using PLLB */ - if ((scsr & (AT91_PMC_UHP | AT91_PMC_UDP)) != 0) { - pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); - return 0; + if (cpu_is_at91rm9200()) { + if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) { + pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); + return 0; + } + } else if (cpu_is_at91sam9260()) { +#warning "Check SAM9260 USB clocks" + } else if (cpu_is_at91sam9261()) { +#warning "Check SAM9261 USB clocks" } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS @@ -112,7 +121,6 @@ EXPORT_SYMBOL(at91_suspend_entering_slow_clock); static void (*slow_clock)(void); - static int at91_pm_enter(suspend_state_t state) { at91_gpio_suspend(); @@ -123,13 +131,7 @@ static int at91_pm_enter(suspend_state_t state) (at91_sys_read(AT91_PMC_PCSR) | (1 << AT91_ID_FIQ) | (1 << AT91_ID_SYS) - | (1 << AT91RM9200_ID_IRQ0) - | (1 << AT91RM9200_ID_IRQ1) - | (1 << AT91RM9200_ID_IRQ2) - | (1 << AT91RM9200_ID_IRQ3) - | (1 << AT91RM9200_ID_IRQ4) - | (1 << AT91RM9200_ID_IRQ5) - | (1 << AT91RM9200_ID_IRQ6)) + | (at91_extern_irq)) & at91_sys_read(AT91_AIC_IMR), state); diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c index 7ee926e5bad..ca102960f52 100644 --- a/arch/arm/mach-clps711x/irq.c +++ b/arch/arm/mach-clps711x/irq.c @@ -63,7 +63,7 @@ static void int1_unmask(unsigned int irq) clps_writel(intmr1, INTMR1); } -static struct irqchip int1_chip = { +static struct irq_chip int1_chip = { .ack = int1_ack, .mask = int1_mask, .unmask = int1_unmask, @@ -100,7 +100,7 @@ static void int2_unmask(unsigned int irq) clps_writel(intmr2, INTMR2); } -static struct irqchip int2_chip = { +static struct irq_chip int2_chip = { .ack = int2_ack, .mask = int2_mask, .unmask = int2_unmask, @@ -112,12 +112,12 @@ void __init clps711x_init_irq(void) for (i = 0; i < NR_IRQS; i++) { if (INT1_IRQS & (1 << i)) { - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_chip(i, &int1_chip); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } if (INT2_IRQS & (1 << i)) { - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_chip(i, &int2_chip); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index fb10cf25258..231b9000473 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -57,7 +57,7 @@ static void cl7500_unmask_irq_a(unsigned int irq) iomd_writeb(val | mask, IOMD_IRQMASKA); } -static struct irqchip clps7500_a_chip = { +static struct irq_chip clps7500_a_chip = { .ack = cl7500_ack_irq_a, .mask = cl7500_mask_irq_a, .unmask = cl7500_unmask_irq_a, @@ -81,7 +81,7 @@ static void cl7500_unmask_irq_b(unsigned int irq) iomd_writeb(val | mask, IOMD_IRQMASKB); } -static struct irqchip clps7500_b_chip = { +static struct irq_chip clps7500_b_chip = { .ack = cl7500_mask_irq_b, .mask = cl7500_mask_irq_b, .unmask = cl7500_unmask_irq_b, @@ -105,7 +105,7 @@ static void cl7500_unmask_irq_c(unsigned int irq) iomd_writeb(val | mask, IOMD_IRQMASKC); } -static struct irqchip clps7500_c_chip = { +static struct irq_chip clps7500_c_chip = { .ack = cl7500_mask_irq_c, .mask = cl7500_mask_irq_c, .unmask = cl7500_unmask_irq_c, @@ -129,7 +129,7 @@ static void cl7500_unmask_irq_d(unsigned int irq) iomd_writeb(val | mask, IOMD_IRQMASKD); } -static struct irqchip clps7500_d_chip = { +static struct irq_chip clps7500_d_chip = { .ack = cl7500_mask_irq_d, .mask = cl7500_mask_irq_d, .unmask = cl7500_unmask_irq_d, @@ -153,7 +153,7 @@ static void cl7500_unmask_irq_dma(unsigned int irq) iomd_writeb(val | mask, IOMD_DMAMASK); } -static struct irqchip clps7500_dma_chip = { +static struct irq_chip clps7500_dma_chip = { .ack = cl7500_mask_irq_dma, .mask = cl7500_mask_irq_dma, .unmask = cl7500_unmask_irq_dma, @@ -177,7 +177,7 @@ static void cl7500_unmask_irq_fiq(unsigned int irq) iomd_writeb(val | mask, IOMD_FIQMASK); } -static struct irqchip clps7500_fiq_chip = { +static struct irq_chip clps7500_fiq_chip = { .ack = cl7500_mask_irq_fiq, .mask = cl7500_mask_irq_fiq, .unmask = cl7500_unmask_irq_fiq, @@ -187,7 +187,7 @@ static void cl7500_no_action(unsigned int irq) { } -static struct irqchip clps7500_no_chip = { +static struct irq_chip clps7500_no_chip = { .ack = cl7500_no_action, .mask = cl7500_no_action, .unmask = cl7500_no_action, @@ -214,43 +214,43 @@ static void __init clps7500_init_irq(void) switch (irq) { case 0 ... 7: set_irq_chip(irq, &clps7500_a_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, flags); break; case 8 ... 15: set_irq_chip(irq, &clps7500_b_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, flags); break; case 16 ... 22: set_irq_chip(irq, &clps7500_dma_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, flags); break; case 24 ... 31: set_irq_chip(irq, &clps7500_c_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, flags); break; case 40 ... 47: set_irq_chip(irq, &clps7500_d_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, flags); break; case 48 ... 55: set_irq_chip(irq, &clps7500_no_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, flags); break; case 64 ... 72: set_irq_chip(irq, &clps7500_fiq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, flags); break; } diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 90103ab373a..8459431cfd7 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -45,7 +45,7 @@ static void ebsa110_unmask_irq(unsigned int irq) __raw_writeb(1 << irq, IRQ_MSET); } -static struct irqchip ebsa110_irq_chip = { +static struct irq_chip ebsa110_irq_chip = { .ack = ebsa110_mask_irq, .mask = ebsa110_mask_irq, .unmask = ebsa110_unmask_irq, @@ -67,7 +67,7 @@ static void __init ebsa110_init_irq(void) for (irq = 0; irq < NR_IRQS; irq++) { set_irq_chip(irq, &ebsa110_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index e346b03cd92..af7904b3d0a 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -9,12 +9,24 @@ config CRUNCH comment "EP93xx Platforms" +config MACH_ADSSPHERE + bool "Support ADS Sphere" + help + Say 'Y' here if you want your kernel to support the ADS + Sphere board. + config MACH_EDB9302 bool "Support Cirrus Logic EDB9302" help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302 Evaluation Board. +config MACH_EDB9302A + bool "Support Cirrus Logic EDB9302A" + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9302A Evaluation Board. + config MACH_EDB9312 bool "Support Cirrus Logic EDB9312" help diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index c2eb18b530c..b06641dd450 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -6,7 +6,9 @@ obj-m := obj-n := obj- := +obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o obj-$(CONFIG_MACH_EDB9302) += edb9302.o +obj-$(CONFIG_MACH_EDB9302A) += edb9302a.o obj-$(CONFIG_MACH_EDB9312) += edb9312.o obj-$(CONFIG_MACH_EDB9315) += edb9315.o obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c new file mode 100644 index 00000000000..ac5d5818eb7 --- /dev/null +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -0,0 +1,91 @@ +/* + * arch/arm/mach-ep93xx/adssphere.c + * ADS Sphere support. + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/io.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static struct physmap_flash_data adssphere_flash_data = { + .width = 4, +}; + +static struct resource adssphere_flash_resource = { + .start = 0x60000000, + .end = 0x61ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device adssphere_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &adssphere_flash_data, + }, + .num_resources = 1, + .resource = &adssphere_flash_resource, +}; + +static struct ep93xx_eth_data adssphere_eth_data = { + .phy_id = 1, +}; + +static struct resource adssphere_eth_resource[] = { + { + .start = EP93XX_ETHERNET_PHYS_BASE, + .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_EP93XX_ETHERNET, + .end = IRQ_EP93XX_ETHERNET, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device adssphere_eth_device = { + .name = "ep93xx-eth", + .id = -1, + .dev = { + .platform_data = &adssphere_eth_data, + }, + .num_resources = 2, + .resource = adssphere_eth_resource, +}; + +static void __init adssphere_init_machine(void) +{ + ep93xx_init_devices(); + platform_device_register(&adssphere_flash); + + memcpy(adssphere_eth_data.dev_addr, + (void *)(EP93XX_ETHERNET_BASE + 0x50), 6); + platform_device_register(&adssphere_eth_device); +} + +MACHINE_START(ADSSPHERE, "ADS Sphere board") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = adssphere_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index e3fd1ab6adc..d649b39711d 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -245,7 +245,7 @@ EXPORT_SYMBOL(gpio_line_set); * EP93xx IRQ handling *************************************************************************/ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { unsigned char status; int i; @@ -335,7 +335,7 @@ static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type) return 0; } -static struct irqchip ep93xx_gpio_ab_irq_chip = { +static struct irq_chip ep93xx_gpio_ab_irq_chip = { .ack = ep93xx_gpio_ab_irq_mask_ack, .mask = ep93xx_gpio_ab_irq_mask, .unmask = ep93xx_gpio_ab_irq_unmask, @@ -352,7 +352,7 @@ void __init ep93xx_init_irq(void) for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) { set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler); diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c new file mode 100644 index 00000000000..62e064bab1d --- /dev/null +++ b/arch/arm/mach-ep93xx/edb9302a.c @@ -0,0 +1,91 @@ +/* + * arch/arm/mach-ep93xx/edb9302a.c + * Cirrus Logic EDB9302A support. + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/io.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static struct physmap_flash_data edb9302a_flash_data = { + .width = 2, +}; + +static struct resource edb9302a_flash_resource = { + .start = 0x60000000, + .end = 0x60ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device edb9302a_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &edb9302a_flash_data, + }, + .num_resources = 1, + .resource = &edb9302a_flash_resource, +}; + +static struct ep93xx_eth_data edb9302a_eth_data = { + .phy_id = 1, +}; + +static struct resource edb9302a_eth_resource[] = { + { + .start = EP93XX_ETHERNET_PHYS_BASE, + .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_EP93XX_ETHERNET, + .end = IRQ_EP93XX_ETHERNET, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device edb9302a_eth_device = { + .name = "ep93xx-eth", + .id = -1, + .dev = { + .platform_data = &edb9302a_eth_data, + }, + .num_resources = 2, + .resource = edb9302a_eth_resource, +}; + +static void __init edb9302a_init_machine(void) +{ + ep93xx_init_devices(); + platform_device_register(&edb9302a_flash); + + memcpy(edb9302a_eth_data.dev_addr, + (void *)(EP93XX_ETHERNET_BASE + 0x50), 6); + platform_device_register(&edb9302a_eth_device); +} + +MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb9302a_init_machine, +MACHINE_END diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index af900f4755a..ef29fc34ce6 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -78,7 +78,7 @@ static void fb_unmask_irq(unsigned int irq) *CSR_IRQ_ENABLE = fb_irq_mask[_DC21285_INR(irq)]; } -static struct irqchip fb_chip = { +static struct irq_chip fb_chip = { .ack = fb_mask_irq, .mask = fb_mask_irq, .unmask = fb_unmask_irq, @@ -96,7 +96,7 @@ static void __init __fb_init_irq(void) for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) { set_irq_chip(irq, &fb_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c index 888dedd501b..79443ffc891 100644 --- a/arch/arm/mach-footbridge/isa-irq.c +++ b/arch/arm/mach-footbridge/isa-irq.c @@ -49,7 +49,7 @@ static void isa_unmask_pic_lo_irq(unsigned int irq) outb(inb(PIC_MASK_LO) & ~mask, PIC_MASK_LO); } -static struct irqchip isa_lo_chip = { +static struct irq_chip isa_lo_chip = { .ack = isa_ack_pic_lo_irq, .mask = isa_mask_pic_lo_irq, .unmask = isa_unmask_pic_lo_irq, @@ -78,14 +78,14 @@ static void isa_unmask_pic_hi_irq(unsigned int irq) outb(inb(PIC_MASK_HI) & ~mask, PIC_MASK_HI); } -static struct irqchip isa_hi_chip = { +static struct irq_chip isa_hi_chip = { .ack = isa_ack_pic_hi_irq, .mask = isa_mask_pic_hi_irq, .unmask = isa_unmask_pic_hi_irq, }; static void -isa_irq_handler(unsigned int irq, struct irqdesc *desc) +isa_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned int isa_irq = *(unsigned char *)PCIIACK_BASE; @@ -150,13 +150,13 @@ void __init isa_init_irq(unsigned int host_irq) if (host_irq != (unsigned int)-1) { for (irq = _ISA_IRQ(0); irq < _ISA_IRQ(8); irq++) { set_irq_chip(irq, &isa_lo_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } for (irq = _ISA_IRQ(8); irq < _ISA_IRQ(16); irq++) { set_irq_chip(irq, &isa_hi_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index 4719229a1a7..7f31816896a 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -101,7 +101,7 @@ static void inline unmask_gpio_irq(u32 irq) static void h720x_gpio_handler(unsigned int mask, unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { IRQDBG("%s irq: %d\n",__FUNCTION__,irq); desc = irq_desc + irq; @@ -117,7 +117,7 @@ h720x_gpio_handler(unsigned int mask, unsigned int irq, } static void -h720x_gpioa_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int mask, irq; @@ -128,7 +128,7 @@ h720x_gpioa_demux_handler(unsigned int irq_unused, struct irqdesc *desc) } static void -h720x_gpiob_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int mask, irq; mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT); @@ -138,7 +138,7 @@ h720x_gpiob_demux_handler(unsigned int irq_unused, struct irqdesc *desc) } static void -h720x_gpioc_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int mask, irq; @@ -149,7 +149,7 @@ h720x_gpioc_demux_handler(unsigned int irq_unused, struct irqdesc *desc) } static void -h720x_gpiod_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int mask, irq; @@ -161,7 +161,7 @@ h720x_gpiod_demux_handler(unsigned int irq_unused, struct irqdesc *desc) #ifdef CONFIG_CPU_H7202 static void -h720x_gpioe_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int mask, irq; @@ -172,13 +172,13 @@ h720x_gpioe_demux_handler(unsigned int irq_unused, struct irqdesc *desc) } #endif -static struct irqchip h720x_global_chip = { +static struct irq_chip h720x_global_chip = { .ack = mask_global_irq, .mask = mask_global_irq, .unmask = unmask_global_irq, }; -static struct irqchip h720x_gpio_chip = { +static struct irq_chip h720x_gpio_chip = { .ack = ack_gpio_irq, .mask = mask_gpio_irq, .unmask = unmask_gpio_irq, @@ -203,14 +203,14 @@ void __init h720x_init_irq (void) /* Initialize global IRQ's, fast path */ for (irq = 0; irq < NR_GLBL_IRQS; irq++) { set_irq_chip(irq, &h720x_global_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } /* Initialize multiplexed IRQ's, slow path */ for (irq = IRQ_CHAINED_GPIOA(0) ; irq <= IRQ_CHAINED_GPIOD(31); irq++) { set_irq_chip(irq, &h720x_gpio_chip); - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID ); } set_irq_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler); @@ -221,7 +221,7 @@ void __init h720x_init_irq (void) #ifdef CONFIG_CPU_H7202 for (irq = IRQ_CHAINED_GPIOE(0) ; irq <= IRQ_CHAINED_GPIOE(31); irq++) { set_irq_chip(irq, &h720x_gpio_chip); - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID ); } set_irq_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler); diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index 06fecaefd8d..703870f30ad 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -106,7 +106,7 @@ static struct platform_device *devices[] __initdata = { * we have to handle all timer interrupts in one place. */ static void -h7202_timerx_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int mask, irq; @@ -162,7 +162,7 @@ static void inline unmask_timerx_irq (u32 irq) CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit; } -static struct irqchip h7202_timerx_chip = { +static struct irq_chip h7202_timerx_chip = { .ack = mask_timerx_irq, .mask = mask_timerx_irq, .unmask = unmask_timerx_irq, @@ -202,7 +202,7 @@ void __init h7202_init_irq (void) irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) { mask_timerx_irq(irq); set_irq_chip(irq, &h7202_timerx_chip); - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID ); } set_irq_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler); diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 12ea58a3b84..b5aa49d00ca 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -104,6 +104,9 @@ EXPORT_SYMBOL(imx_gpio_mode); */ static unsigned int imx_decode_pll(unsigned int pll) { + unsigned long long ll; + unsigned long quot; + u32 mfi = (pll >> 10) & 0xf; u32 mfn = pll & 0x3ff; u32 mfd = (pll >> 16) & 0x3ff; @@ -112,7 +115,11 @@ static unsigned int imx_decode_pll(unsigned int pll) mfi = mfi <= 5 ? 5 : mfi; - return (2 * (f_ref>>10) * ( (mfi<<10) + (mfn<<10) / (mfd+1) )) / (pd+1); + ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) ); + quot = (pd+1) * (1<<16); + ll += quot / 2; + do_div(ll, quot); + return (unsigned int) ll; } unsigned int imx_get_system_clk(void) diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c index 368b13b058a..0791b56caec 100644 --- a/arch/arm/mach-imx/irq.c +++ b/arch/arm/mach-imx/irq.c @@ -146,7 +146,7 @@ imx_gpio_unmask_irq(unsigned int irq) static void imx_gpio_handler(unsigned int mask, unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { desc = irq_desc + irq; while (mask) { @@ -161,7 +161,7 @@ imx_gpio_handler(unsigned int mask, unsigned int irq, } static void -imx_gpioa_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int mask, irq; @@ -171,7 +171,7 @@ imx_gpioa_demux_handler(unsigned int irq_unused, struct irqdesc *desc) } static void -imx_gpiob_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int mask, irq; @@ -181,7 +181,7 @@ imx_gpiob_demux_handler(unsigned int irq_unused, struct irqdesc *desc) } static void -imx_gpioc_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int mask, irq; @@ -191,7 +191,7 @@ imx_gpioc_demux_handler(unsigned int irq_unused, struct irqdesc *desc) } static void -imx_gpiod_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int mask, irq; @@ -230,13 +230,13 @@ imx_init_irq(void) for (irq = 0; irq < IMX_IRQS; irq++) { set_irq_chip(irq, &imx_internal_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) { set_irq_chip(irq, &imx_gpio_chip); - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID); } diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 8ae4a2c5066..40039b2a90b 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -14,6 +14,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/time.h> +#include <linux/clocksource.h> #include <asm/hardware.h> #include <asm/io.h> @@ -24,33 +25,7 @@ /* Use timer 1 as system timer */ #define TIMER_BASE IMX_TIM1_BASE -/* - * Returns number of us since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -static unsigned long imx_gettimeoffset(void) -{ - unsigned long ticks; - - /* - * Get the current number of ticks. Note that there is a race - * condition between us reading the timer and checking for - * an interrupt. We get around this by ensuring that the - * counter has not reloaded between our two reads. - */ - ticks = IMX_TCN(TIMER_BASE); - - /* - * Interrupt pending? If so, we've reloaded once already. - */ - if (IMX_TSTAT(TIMER_BASE) & TSTAT_COMP) - ticks += LATCH; - - /* - * Convert the ticks to usecs - */ - return (1000000 / CLK32) * ticks; -} +static unsigned long evt_diff; /* * IRQ handler for the timer @@ -58,14 +33,23 @@ static unsigned long imx_gettimeoffset(void) static irqreturn_t imx_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); + uint32_t tstat; /* clear the interrupt */ - if (IMX_TSTAT(TIMER_BASE)) - IMX_TSTAT(TIMER_BASE) = 0; + tstat = IMX_TSTAT(TIMER_BASE); + IMX_TSTAT(TIMER_BASE) = 0; + + if (tstat & TSTAT_COMP) { + do { + + write_seqlock(&xtime_lock); + timer_tick(); + write_sequnlock(&xtime_lock); + IMX_TCMP(TIMER_BASE) += evt_diff; - timer_tick(); - write_sequnlock(&xtime_lock); + } while (unlikely((int32_t)(IMX_TCMP(TIMER_BASE) + - IMX_TCN(TIMER_BASE)) < 0)); + } return IRQ_HANDLED; } @@ -77,9 +61,9 @@ static struct irqaction imx_timer_irq = { }; /* - * Set up timer interrupt, and return the current time in seconds. + * Set up timer hardware into expected mode and state. */ -static void __init imx_timer_init(void) +static void __init imx_timer_hardware_init(void) { /* * Initialise to a known state (all timers off, and timing reset) @@ -87,7 +71,38 @@ static void __init imx_timer_init(void) IMX_TCTL(TIMER_BASE) = 0; IMX_TPRER(TIMER_BASE) = 0; IMX_TCMP(TIMER_BASE) = LATCH - 1; - IMX_TCTL(TIMER_BASE) = TCTL_CLK_32 | TCTL_IRQEN | TCTL_TEN; + + IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_IRQEN | TCTL_TEN; + evt_diff = LATCH; +} + +cycle_t imx_get_cycles(void) +{ + return IMX_TCN(TIMER_BASE); +} + +static struct clocksource clocksource_imx = { + .name = "imx_timer1", + .rating = 200, + .read = imx_get_cycles, + .mask = 0xFFFFFFFF, + .shift = 20, + .is_continuous = 1, +}; + +static int __init imx_clocksource_init(void) +{ + clocksource_imx.mult = + clocksource_hz2mult(imx_get_perclk1(), clocksource_imx.shift); + clocksource_register(&clocksource_imx); + + return 0; +} + +static void __init imx_timer_init(void) +{ + imx_timer_hardware_init(); + imx_clocksource_init(); /* * Make irqs happen for the system timer @@ -97,5 +112,4 @@ static void __init imx_timer_init(void) struct sys_timer imx_timer = { .init = imx_timer_init, - .offset = imx_gettimeoffset, }; diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 191c57a3b99..72280754354 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -183,7 +183,7 @@ static void __init ap_init_irq(void) for (i = 0; i < NR_IRQS; i++) { if (((1 << i) & INTEGRATOR_SC_VALID_INT) != 0) { set_irq_chip(i, &sc_chip); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 771b65bffe6..913f64b2240 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -202,7 +202,7 @@ static struct irq_chip sic_chip = { }; static void -sic_handle_irq(unsigned int irq, struct irqdesc *desc) +sic_handle_irq(unsigned int irq, struct irq_desc *desc) { unsigned long status = sic_readl(INTCP_VA_SIC_BASE + IRQ_STATUS); @@ -238,7 +238,7 @@ static void __init intcp_init_irq(void) if (i == 29) break; set_irq_chip(i, &pic_chip); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } @@ -247,7 +247,7 @@ static void __init intcp_init_irq(void) for (i = IRQ_CIC_START; i <= IRQ_CIC_END; i++) { set_irq_chip(i, &cic_chip); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID); } @@ -256,7 +256,7 @@ static void __init intcp_init_irq(void) for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) { set_irq_chip(i, &sic_chip); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c index 1bc8534ef0c..613b841a10f 100644 --- a/arch/arm/mach-integrator/platsmp.c +++ b/arch/arm/mach-integrator/platsmp.c @@ -18,7 +18,6 @@ #include <asm/cacheflush.h> #include <asm/delay.h> #include <asm/mmu_context.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> #include <asm/smp.h> diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index 69d6302f40c..3ec1cd5c4f9 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c @@ -70,7 +70,7 @@ void __init iop32x_init_irq(void) for (i = 0; i < NR_IRQS; i++) { set_irq_chip(i, &ext_chip); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c index 63304b3d0d7..00b37f32d72 100644 --- a/arch/arm/mach-iop33x/irq.c +++ b/arch/arm/mach-iop33x/irq.c @@ -121,7 +121,7 @@ void __init iop33x_init_irq(void) for (i = 0; i < NR_IRQS; i++) { set_irq_chip(i, (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 22c98e9dad2..27b7480f4af 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -308,7 +308,7 @@ EXPORT_SYMBOL(gpio_line_config); /************************************************************************* * IRQ handling IXP2000 *************************************************************************/ -static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc) +static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc) { int i; unsigned long status = *IXP2000_GPIO_INST; @@ -373,7 +373,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq) ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0))); } -static struct irqchip ixp2000_GPIO_irq_chip = { +static struct irq_chip ixp2000_GPIO_irq_chip = { .ack = ixp2000_GPIO_irq_mask_ack, .mask = ixp2000_GPIO_irq_mask, .unmask = ixp2000_GPIO_irq_unmask, @@ -401,7 +401,7 @@ static void ixp2000_pci_irq_unmask(unsigned int irq) /* * Error interrupts. These are used extensively by the microengine drivers */ -static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc) +static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc) { int i; unsigned long status = *IXP2000_IRQ_ERR_STATUS; @@ -426,13 +426,13 @@ static void ixp2000_err_irq_unmask(unsigned int irq) (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); } -static struct irqchip ixp2000_err_irq_chip = { +static struct irq_chip ixp2000_err_irq_chip = { .ack = ixp2000_err_irq_mask, .mask = ixp2000_err_irq_mask, .unmask = ixp2000_err_irq_unmask }; -static struct irqchip ixp2000_pci_irq_chip = { +static struct irq_chip ixp2000_pci_irq_chip = { .ack = ixp2000_pci_irq_mask, .mask = ixp2000_pci_irq_mask, .unmask = ixp2000_pci_irq_unmask @@ -448,7 +448,7 @@ static void ixp2000_irq_unmask(unsigned int irq) ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); } -static struct irqchip ixp2000_irq_chip = { +static struct irq_chip ixp2000_irq_chip = { .ack = ixp2000_irq_mask, .mask = ixp2000_irq_mask, .unmask = ixp2000_irq_unmask @@ -484,7 +484,7 @@ void __init ixp2000_init_irq(void) for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { set_irq_chip(irq, &ixp2000_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } else set_irq_flags(irq, 0); } @@ -493,7 +493,7 @@ void __init ixp2000_init_irq(void) if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) & IXP2000_VALID_ERR_IRQ_MASK) { set_irq_chip(irq, &ixp2000_err_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } else @@ -503,7 +503,7 @@ void __init ixp2000_init_irq(void) for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { set_irq_chip(irq, &ixp2000_GPIO_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler); @@ -516,7 +516,7 @@ void __init ixp2000_init_irq(void) ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI)); for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) { set_irq_chip(irq, &ixp2000_pci_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } } diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index aa2655092d2..52b368b3434 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -106,7 +106,7 @@ static void ixdp2x00_irq_unmask(unsigned int irq) ixp2000_release_slowport(&old_cfg); } -static void ixdp2x00_irq_handler(unsigned int irq, struct irqdesc *desc) +static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc) { volatile u32 ex_interrupt = 0; static struct slowport_cfg old_cfg; @@ -129,7 +129,7 @@ static void ixdp2x00_irq_handler(unsigned int irq, struct irqdesc *desc) for(i = 0; i < board_irq_count; i++) { if(ex_interrupt & (1 << i)) { - struct irqdesc *cpld_desc; + struct irq_desc *cpld_desc; int cpld_irq = IXP2000_BOARD_IRQ(0) + i; cpld_desc = irq_desc + cpld_irq; desc_handle_irq(cpld_irq, cpld_desc); @@ -139,7 +139,7 @@ static void ixdp2x00_irq_handler(unsigned int irq, struct irqdesc *desc) desc->chip->unmask(irq); } -static struct irqchip ixdp2x00_cpld_irq_chip = { +static struct irq_chip ixdp2x00_cpld_irq_chip = { .ack = ixdp2x00_irq_mask, .mask = ixdp2x00_irq_mask, .unmask = ixdp2x00_irq_unmask @@ -162,7 +162,7 @@ void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) { set_irq_chip(irq, &ixdp2x00_cpld_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 9ccae9e63f7..3084a5fa751 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -63,7 +63,7 @@ static void ixdp2x01_irq_unmask(unsigned int irq) static u32 valid_irq_mask; -static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc) +static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc) { u32 ex_interrupt; int i; @@ -79,7 +79,7 @@ static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc) for (i = 0; i < IXP2000_BOARD_IRQS; i++) { if (ex_interrupt & (1 << i)) { - struct irqdesc *cpld_desc; + struct irq_desc *cpld_desc; int cpld_irq = IXP2000_BOARD_IRQ(0) + i; cpld_desc = irq_desc + cpld_irq; desc_handle_irq(cpld_irq, cpld_desc); @@ -89,7 +89,7 @@ static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc) desc->chip->unmask(irq); } -static struct irqchip ixdp2x01_irq_chip = { +static struct irq_chip ixdp2x01_irq_chip = { .mask = ixdp2x01_irq_mask, .ack = ixdp2x01_irq_mask, .unmask = ixdp2x01_irq_unmask @@ -119,7 +119,7 @@ void __init ixdp2x01_init_irq(void) for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) { if (irq & valid_irq_mask) { set_irq_chip(irq, &ixdp2x01_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } else { set_irq_flags(irq, 0); diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index d4bf1e1c003..5a09a90c08f 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -32,7 +32,7 @@ #include <asm/mach/pci.h> -static int pci_master_aborts = 0; +static volatile int pci_master_aborts = 0; static int clear_master_aborts(void); diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index a704a182004..ce6ad635a00 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -224,14 +224,14 @@ static void ixp23xx_irq_edge_unmask(unsigned int irq) *intr_reg |= (1 << (irq % 32)); } -static struct irqchip ixp23xx_irq_level_chip = { +static struct irq_chip ixp23xx_irq_level_chip = { .ack = ixp23xx_irq_mask, .mask = ixp23xx_irq_mask, .unmask = ixp23xx_irq_level_unmask, .set_type = ixp23xx_irq_set_type }; -static struct irqchip ixp23xx_irq_edge_chip = { +static struct irq_chip ixp23xx_irq_edge_chip = { .ack = ixp23xx_irq_ack, .mask = ixp23xx_irq_mask, .unmask = ixp23xx_irq_edge_unmask, @@ -251,11 +251,11 @@ static void ixp23xx_pci_irq_unmask(unsigned int irq) /* * TODO: Should this just be done at ASM level? */ -static void pci_handler(unsigned int irq, struct irqdesc *desc) +static void pci_handler(unsigned int irq, struct irq_desc *desc) { u32 pci_interrupt; unsigned int irqno; - struct irqdesc *int_desc; + struct irq_desc *int_desc; pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS; @@ -276,7 +276,7 @@ static void pci_handler(unsigned int irq, struct irqdesc *desc) desc->chip->unmask(irq); } -static struct irqchip ixp23xx_pci_irq_chip = { +static struct irq_chip ixp23xx_pci_irq_chip = { .ack = ixp23xx_pci_irq_mask, .mask = ixp23xx_pci_irq_mask, .unmask = ixp23xx_pci_irq_unmask @@ -287,11 +287,11 @@ static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type) switch (type) { case IXP23XX_IRQ_LEVEL: set_irq_chip(irq, &ixp23xx_irq_level_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); break; case IXP23XX_IRQ_EDGE: set_irq_chip(irq, &ixp23xx_irq_edge_chip); - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); break; } set_irq_flags(irq, IRQF_VALID); @@ -322,7 +322,7 @@ void __init ixp23xx_init_irq(void) for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) { set_irq_chip(irq, &ixp23xx_pci_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index b6ab0e8bb5e..7a86a2516ea 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -60,7 +60,7 @@ static void ixdp2351_inta_unmask(unsigned int irq) *IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(irq); } -static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc) +static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc) { u16 ex_interrupt = *IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID; @@ -70,7 +70,7 @@ static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc) for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) { if (ex_interrupt & (1 << i)) { - struct irqdesc *cpld_desc; + struct irq_desc *cpld_desc; int cpld_irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i); cpld_desc = irq_desc + cpld_irq; @@ -81,7 +81,7 @@ static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc) desc->chip->unmask(irq); } -static struct irqchip ixdp2351_inta_chip = { +static struct irq_chip ixdp2351_inta_chip = { .ack = ixdp2351_inta_mask, .mask = ixdp2351_inta_mask, .unmask = ixdp2351_inta_unmask @@ -97,7 +97,7 @@ static void ixdp2351_intb_unmask(unsigned int irq) *IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(irq); } -static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc) +static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc) { u16 ex_interrupt = *IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID; @@ -107,7 +107,7 @@ static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc) for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) { if (ex_interrupt & (1 << i)) { - struct irqdesc *cpld_desc; + struct irq_desc *cpld_desc; int cpld_irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i); cpld_desc = irq_desc + cpld_irq; @@ -118,7 +118,7 @@ static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc) desc->chip->unmask(irq); } -static struct irqchip ixdp2351_intb_chip = { +static struct irq_chip ixdp2351_intb_chip = { .ack = ixdp2351_intb_mask, .mask = ixdp2351_intb_mask, .unmask = ixdp2351_intb_unmask @@ -142,7 +142,7 @@ void ixdp2351_init_irq(void) irq++) { if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) { set_irq_flags(irq, IRQF_VALID); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_chip(irq, &ixdp2351_inta_chip); } } @@ -153,7 +153,7 @@ void ixdp2351_init_irq(void) irq++) { if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) { set_irq_flags(irq, IRQF_VALID); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_chip(irq, &ixdp2351_intb_chip); } } diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 3b34fa35e36..ac7d43d23c2 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -36,7 +36,7 @@ extern int (*external_fault) (unsigned long, struct pt_regs *); -static int pci_master_aborts = 0; +static volatile int pci_master_aborts = 0; #ifdef DEBUG #define DBG(x...) printk(x) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index fbe288a8da6..2ec9a9e9a04 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -28,6 +28,7 @@ #include <linux/timex.h> #include <linux/clocksource.h> +#include <asm/arch/udc.h> #include <asm/hardware.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -39,6 +40,8 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> +static int __init ixp4xx_clocksource_init(void); + /************************************************************************* * IXP4xx chipset I/O mapping *************************************************************************/ @@ -195,7 +198,7 @@ static void ixp4xx_irq_unmask(unsigned int irq) *IXP4XX_ICMR |= (1 << irq); } -static struct irqchip ixp4xx_irq_chip = { +static struct irq_chip ixp4xx_irq_chip = { .name = "IXP4xx", .ack = ixp4xx_irq_ack, .mask = ixp4xx_irq_mask, @@ -224,7 +227,7 @@ void __init ixp4xx_init_irq(void) /* Default to all level triggered */ for(i = 0; i < NR_IRQS; i++) { set_irq_chip(i, &ixp4xx_irq_chip); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID); } } @@ -280,12 +283,52 @@ static void __init ixp4xx_timer_init(void) /* Connect the interrupt handler and enable the interrupt */ setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq); + + ixp4xx_clocksource_init(); } struct sys_timer ixp4xx_timer = { .init = ixp4xx_timer_init, }; +static struct pxa2xx_udc_mach_info ixp4xx_udc_info; + +void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info) +{ + memcpy(&ixp4xx_udc_info, info, sizeof *info); +} + +static struct resource ixp4xx_udc_resources[] = { + [0] = { + .start = 0xc800b000, + .end = 0xc800bfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IXP4XX_USB, + .end = IRQ_IXP4XX_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +/* + * USB device controller. The IXP4xx uses the same controller as PXA2XX, + * so we just use the same device. + */ +static struct platform_device ixp4xx_udc_device = { + .name = "pxa2xx-udc", + .id = -1, + .num_resources = 2, + .resource = ixp4xx_udc_resources, + .dev = { + .platform_data = &ixp4xx_udc_info, + }, +}; + +static struct platform_device *ixp4xx_devices[] __initdata = { + &ixp4xx_udc_device, +}; + static struct resource ixp46x_i2c_resources[] = { [0] = { .start = 0xc8011000, @@ -321,6 +364,8 @@ void __init ixp4xx_sys_init(void) { ixp4xx_exp_bus_size = SZ_16M; + platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); + if (cpu_is_ixp46x()) { int region; @@ -363,5 +408,3 @@ static int __init ixp4xx_clocksource_init(void) return 0; } - -device_initcall(ixp4xx_clocksource_init); diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c index b7af5640ea7..561a0fe7095 100644 --- a/arch/arm/mach-l7200/core.c +++ b/arch/arm/mach-l7200/core.c @@ -55,7 +55,7 @@ static void l7200_unmask_irq(unsigned int irq) IRQ_ENABLE = 1 << irq; } -static struct irqchip l7200_irq_chip = { +static struct irq_chip l7200_irq_chip = { .ack = l7200_mask_irq, .mask = l7200_mask_irq, .unmask = l7200_unmask_irq @@ -71,7 +71,7 @@ static void __init l7200_init_irq(void) for (irq = 0; irq < NR_IRQS; irq++) { set_irq_chip(irq, &l7200_irq_chip); set_irq_flags(irq, IRQF_VALID); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); } init_FIQ(); diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c index 15fbcc911fe..6d26661d99f 100644 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c @@ -71,7 +71,7 @@ static struct irq_chip kev7a400_cpld_chip = { }; -static void kev7a400_cpld_handler (unsigned int irq, struct irqdesc *desc) +static void kev7a400_cpld_handler (unsigned int irq, struct irq_desc *desc) { u32 mask = CPLD_LATCHED_INTS; irq = IRQ_KEV7A400_CPLD; @@ -88,7 +88,7 @@ void __init lh7a40x_init_board_irq (void) for (irq = IRQ_KEV7A400_CPLD; irq < IRQ_KEV7A400_CPLD + NR_IRQ_BOARD; ++irq) { set_irq_chip (irq, &kev7a400_cpld_chip); - set_irq_handler (irq, do_edge_IRQ); + set_irq_handler (irq, handle_edge_irq); set_irq_flags (irq, IRQF_VALID); } set_irq_chained_handler (IRQ_CPLD, kev7a400_cpld_handler); diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c index 8441e0a156c..fe64946f9e1 100644 --- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c @@ -207,7 +207,7 @@ static struct irq_chip lpd7a40x_cpld_chip = { .unmask = lh7a40x_unmask_cpld_irq, }; -static void lpd7a40x_cpld_handler (unsigned int irq, struct irqdesc *desc) +static void lpd7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc) { unsigned int mask = CPLD_INTERRUPTS; @@ -279,7 +279,7 @@ void __init lh7a40x_init_board_irq (void) for (irq = IRQ_BOARD_START; irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) { set_irq_chip (irq, &lpd7a40x_cpld_chip); - set_irq_handler (irq, do_level_IRQ); + set_irq_handler (irq, handle_level_irq); set_irq_flags (irq, IRQF_VALID); } diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c index 646071334b8..c7433b3c581 100644 --- a/arch/arm/mach-lh7a40x/irq-kev7a400.c +++ b/arch/arm/mach-lh7a40x/irq-kev7a400.c @@ -51,7 +51,7 @@ irq_chip lh7a400_cpld_chip = { }; static void -lh7a400_cpld_handler (unsigned int irq, struct irqdesc *desc) +lh7a400_cpld_handler (unsigned int irq, struct irq_desc *desc) { u32 mask = CPLD_LATCHED_INTS; irq = IRQ_KEV_7A400_CPLD; @@ -71,7 +71,7 @@ lh7a400_init_board_irq (void) for (irq = IRQ_KEV7A400_CPLD; irq < IRQ_KEV7A400_CPLD + NR_IRQ_KEV7A400_CPLD; ++irq) { set_irq_chip (irq, &lh7a400_cpld_chip); - set_irq_handler (irq, do_edge_IRQ); + set_irq_handler (irq, handle_edge_irq); set_irq_flags (irq, IRQF_VALID); } set_irq_chained_handler (IRQ_CPLD, kev7a400_cpld_handler); diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c index 091b2dc58d2..0b938e8b4d9 100644 --- a/arch/arm/mach-lh7a40x/irq-lh7a400.c +++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c @@ -74,11 +74,11 @@ void __init lh7a400_init_irq (void) case IRQ_GPIO6INTR: case IRQ_GPIO7INTR: set_irq_chip (irq, &lh7a400_gpio_chip); - set_irq_handler (irq, do_level_IRQ); /* OK default */ + set_irq_handler (irq, handle_level_irq); /* OK default */ break; default: set_irq_chip (irq, &lh7a400_internal_chip); - set_irq_handler (irq, do_level_IRQ); + set_irq_handler (irq, handle_level_irq); } set_irq_flags (irq, IRQF_VALID); } diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c index 7059b983724..5760f8c53e8 100644 --- a/arch/arm/mach-lh7a40x/irq-lh7a404.c +++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c @@ -161,13 +161,13 @@ void __init lh7a404_init_irq (void) set_irq_chip (irq, irq < 32 ? &lh7a404_gpio_vic1_chip : &lh7a404_gpio_vic2_chip); - set_irq_handler (irq, do_level_IRQ); /* OK default */ + set_irq_handler (irq, handle_level_irq); /* OK default */ break; default: set_irq_chip (irq, irq < 32 ? &lh7a404_vic1_chip : &lh7a404_vic2_chip); - set_irq_handler (irq, do_level_IRQ); + set_irq_handler (irq, handle_level_irq); } set_irq_flags (irq, IRQF_VALID); } diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c index b20376804bb..15b9577023c 100644 --- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c @@ -57,7 +57,7 @@ static struct irq_chip lh7a40x_cpld_chip = { .unmask = lh7a40x_unmask_cpld_irq, }; -static void lh7a40x_cpld_handler (unsigned int irq, struct irqdesc *desc) +static void lh7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc) { unsigned int mask = CPLD_INTERRUPTS; @@ -118,7 +118,7 @@ void __init lh7a40x_init_board_irq (void) for (irq = IRQ_BOARD_START; irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) { set_irq_chip (irq, &lh7a40x_cpld_chip); - set_irq_handler (irq, do_edge_IRQ); + set_irq_handler (irq, handle_edge_irq); set_irq_flags (irq, IRQF_VALID); } diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index edbbbdc3b06..b9ca8f98265 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -69,7 +69,7 @@ static struct platform_device *devices[] __initdata = { #endif static void -netx_hif_demux_handler(unsigned int irq_unused, struct irqdesc *desc) +netx_hif_demux_handler(unsigned int irq_unused, struct irq_desc *desc) { unsigned int irq = NETX_IRQ_HIF_CHAINED(0); unsigned int stat; @@ -160,7 +160,7 @@ netx_hif_unmask_irq(unsigned int _irq) DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq); } -static struct irqchip netx_hif_chip = { +static struct irq_chip netx_hif_chip = { .ack = netx_hif_ack_irq, .mask = netx_hif_mask_irq, .unmask = netx_hif_unmask_irq, @@ -175,7 +175,7 @@ void __init netx_init_irq(void) for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) { set_irq_chip(irq, &netx_hif_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 8e40208b10b..30e18810904 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -84,9 +84,9 @@ static void fpga_mask_ack_irq(unsigned int irq) fpga_ack_irq(irq); } -void innovator_fpga_IRQ_demux(unsigned int irq, struct irqdesc *desc) +void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc) { - struct irqdesc *d; + struct irq_desc *d; u32 stat; int fpga_irq; @@ -168,7 +168,7 @@ void omap1510_fpga_init_irq(void) set_irq_chip(i, &omap_fpga_irq); } - set_irq_handler(i, do_edge_IRQ); + set_irq_handler(i, handle_edge_irq); set_irq_flags(i, IRQF_VALID); } diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 3ea140bb9eb..6383a12ad97 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -229,7 +229,7 @@ void __init omap_init_irq(void) omap_irq_set_cfg(j, 0, 0, irq_trigger); set_irq_chip(j, &omap_irq_chip); - set_irq_handler(j, do_level_IRQ); + set_irq_handler(j, handle_level_irq); set_irq_flags(j, IRQF_VALID); } } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 11870093d7a..a39d3068030 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -130,7 +130,7 @@ void __init omap_init_irq(void) for (i = 0; i < nr_irqs; i++) { set_irq_chip(i, &omap_irq_chip); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID); } } diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c index 3a4bcf3d91f..968d0b02759 100644 --- a/arch/arm/mach-pnx4008/irq.c +++ b/arch/arm/mach-pnx4008/irq.c @@ -59,22 +59,22 @@ static int pnx4008_set_irq_type(unsigned int irq, unsigned int type) case IRQT_RISING: __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /*rising edge */ - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); break; case IRQT_FALLING: __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*falling edge */ - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); break; case IRQT_LOW: __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*low level */ - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); break; case IRQT_HIGH: __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /* high level */ - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); break; /* IRQT_BOTHEDGE is not supported */ @@ -85,7 +85,7 @@ static int pnx4008_set_irq_type(unsigned int irq, unsigned int type) return 0; } -static struct irqchip pnx4008_irq_chip = { +static struct irq_chip pnx4008_irq_chip = { .ack = pnx4008_mask_ack_irq, .mask = pnx4008_mask_irq, .unmask = pnx4008_unmask_irq, diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 03d07cae26c..9e3d0bdcba0 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -13,12 +13,10 @@ config ARCH_LUBBOCK config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x - select IWMMXT config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform" select PXA27x - select IWMMXT config ARCH_PXA_IDP bool "Accelent Xscale IDP" @@ -53,7 +51,6 @@ config PXA_SHARPSL_25x config PXA_SHARPSL_27x bool "Sharp PXA270 models (SL-Cxx00)" select PXA27x - select IWMMXT endchoice @@ -129,11 +126,6 @@ config PXA27x help Select code specific to PXA27x variants -config IWMMXT - bool - help - Enable support for iWMMXt - config PXA_SHARP_C7xx bool select PXA_SSP diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 45fb2c3bcf8..6ae605857ca 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -25,6 +25,10 @@ #include <linux/pm.h> #include <linux/string.h> +#include <linux/sched.h> +#include <asm/cnt32_to_63.h> +#include <asm/div64.h> + #include <asm/hardware.h> #include <asm/irq.h> #include <asm/system.h> @@ -41,6 +45,62 @@ #include "generic.h" /* + * This is the PXA2xx sched_clock implementation. This has a resolution + * of at least 308ns and a maximum value that depends on the value of + * CLOCK_TICK_RATE. + * + * The return value is guaranteed to be monotonic in that range as + * long as there is always less than 582 seconds between successive + * calls to this function. + */ +unsigned long long sched_clock(void) +{ + unsigned long long v = cnt32_to_63(OSCR); + /* Note: top bit ov v needs cleared unless multiplier is even. */ + +#if CLOCK_TICK_RATE == 3686400 + /* 1E9 / 3686400 => 78125 / 288, max value = 32025597s (370 days). */ + /* The <<1 is used to get rid of tick.hi top bit */ + v *= 78125<<1; + do_div(v, 288<<1); +#elif CLOCK_TICK_RATE == 3250000 + /* 1E9 / 3250000 => 4000 / 13, max value = 709490156s (8211 days) */ + v *= 4000; + do_div(v, 13); +#elif CLOCK_TICK_RATE == 3249600 + /* 1E9 / 3249600 => 625000 / 2031, max value = 4541295s (52 days) */ + v *= 625000; + do_div(v, 2031); +#else +#warning "consider fixing sched_clock for your value of CLOCK_TICK_RATE" + /* + * 96-bit math to perform tick * NSEC_PER_SEC / CLOCK_TICK_RATE for + * any value of CLOCK_TICK_RATE. Max value is in the 80 thousand + * years range which is nice, but with higher computation cost. + */ + { + union { + unsigned long long val; + struct { unsigned long lo, hi; }; + } x; + unsigned long long y; + + x.val = v; + x.hi &= 0x7fffffff; + y = (unsigned long long)x.lo * NSEC_PER_SEC; + x.lo = y; + y = (y >> 32) + (unsigned long long)x.hi * NSEC_PER_SEC; + x.hi = do_div(y, CLOCK_TICK_RATE); + do_div(x.val, CLOCK_TICK_RATE); + x.hi += y; + v = x.val; + } +#endif + + return v; +} + +/* * Handy function to set GPIO alternate functions */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index ab1a16025d5..f815678a9d6 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -143,7 +143,7 @@ static struct irq_chip pxa_low_gpio_chip = { * Demux handler for GPIO>=2 edge detect interrupts */ -static void pxa_gpio_demux_handler(unsigned int irq, struct irqdesc *desc) +static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) { unsigned int mask; int loop; @@ -286,27 +286,27 @@ void __init pxa_init_irq(void) for (irq = PXA_IRQ(PXA_IRQ_SKIP); irq <= PXA_IRQ(31); irq++) { set_irq_chip(irq, &pxa_internal_chip_low); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } #if PXA_INTERNAL_IRQS > 32 for (irq = PXA_IRQ(32); irq < PXA_IRQ(PXA_INTERNAL_IRQS); irq++) { set_irq_chip(irq, &pxa_internal_chip_high); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } #endif for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { set_irq_chip(irq, &pxa_low_gpio_chip); - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(PXA_LAST_GPIO); irq++) { set_irq_chip(irq, &pxa_muxed_gpio_chip); - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 5749f6b72e1..8e27a64fa9f 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -75,7 +75,7 @@ static struct irq_chip lpd270_irq_chip = { .unmask = lpd270_unmask_irq, }; -static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc) +static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned long pending; @@ -105,7 +105,7 @@ static void __init lpd270_init_irq(void) /* setup extra LogicPD PXA270 irqs */ for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) { set_irq_chip(irq, &lpd270_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 142c33c3dff..055de7f4f00 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -85,7 +85,7 @@ static struct irq_chip lubbock_irq_chip = { .unmask = lubbock_unmask_irq, }; -static void lubbock_irq_handler(unsigned int irq, struct irqdesc *desc) +static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; do { @@ -108,7 +108,7 @@ static void __init lubbock_init_irq(void) /* setup extra lubbock irqs */ for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) { set_irq_chip(irq, &lubbock_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 49c34d94a9f..56d94d88d5c 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -71,7 +71,7 @@ static struct irq_chip mainstone_irq_chip = { .unmask = mainstone_unmask_irq, }; -static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc) +static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled; do { @@ -94,7 +94,7 @@ static void __init mainstone_init_irq(void) /* setup extra Mainstone irqs */ for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) { set_irq_chip(irq, &mainstone_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14)) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); else diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 2112c414f0e..b4d8276d605 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -83,7 +83,8 @@ int pxa_pm_enter(suspend_state_t state) #ifdef CONFIG_IWMMXT /* force any iWMMXt context to ram **/ - iwmmxt_task_disable(NULL); + if (elf_hwcap & HWCAP_IWMMXT) + iwmmxt_task_disable(NULL); #endif /* preserve current time */ diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 3ac268fa419..b9146686102 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -124,6 +124,7 @@ static struct irqaction pxa_timer_irq = { static void __init pxa_timer_init(void) { struct timespec tv; + unsigned long flags; set_rtc = pxa_set_rtc; @@ -132,12 +133,12 @@ static void __init pxa_timer_init(void) do_settimeofday(&tv); OIER = 0; /* disable any timer interrupts */ - OSCR = LATCH*2; /* push OSCR out of the way */ - OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &pxa_timer_irq); + local_irq_save(flags); OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer */ + OSMR0 = OSCR + LATCH; /* set initial match */ + local_irq_restore(flags); } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c index 56b2716f8cf..7a029621db4 100644 --- a/arch/arm/mach-rpc/irq.c +++ b/arch/arm/mach-rpc/irq.c @@ -34,7 +34,7 @@ static void iomd_unmask_irq_a(unsigned int irq) iomd_writeb(val | mask, IOMD_IRQMASKA); } -static struct irqchip iomd_a_chip = { +static struct irq_chip iomd_a_chip = { .ack = iomd_ack_irq_a, .mask = iomd_mask_irq_a, .unmask = iomd_unmask_irq_a, @@ -58,7 +58,7 @@ static void iomd_unmask_irq_b(unsigned int irq) iomd_writeb(val | mask, IOMD_IRQMASKB); } -static struct irqchip iomd_b_chip = { +static struct irq_chip iomd_b_chip = { .ack = iomd_mask_irq_b, .mask = iomd_mask_irq_b, .unmask = iomd_unmask_irq_b, @@ -82,7 +82,7 @@ static void iomd_unmask_irq_dma(unsigned int irq) iomd_writeb(val | mask, IOMD_DMAMASK); } -static struct irqchip iomd_dma_chip = { +static struct irq_chip iomd_dma_chip = { .ack = iomd_mask_irq_dma, .mask = iomd_mask_irq_dma, .unmask = iomd_unmask_irq_dma, @@ -106,7 +106,7 @@ static void iomd_unmask_irq_fiq(unsigned int irq) iomd_writeb(val | mask, IOMD_FIQMASK); } -static struct irqchip iomd_fiq_chip = { +static struct irq_chip iomd_fiq_chip = { .ack = iomd_mask_irq_fiq, .mask = iomd_mask_irq_fiq, .unmask = iomd_unmask_irq_fiq, @@ -134,19 +134,19 @@ void __init rpc_init_irq(void) switch (irq) { case 0 ... 7: set_irq_chip(irq, &iomd_a_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, flags); break; case 8 ... 15: set_irq_chip(irq, &iomd_b_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, flags); break; case 16 ... 21: set_irq_chip(irq, &iomd_dma_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, flags); break; diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 63965c78de8..08b2f300eb7 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -41,9 +41,16 @@ config BAST_PC104_IRQ Say Y here to enable the PC104 IRQ routing on the Simtec BAST (EB2410ITX) +config PM_H1940 + bool + depends on PM + help + Internal node for H1940 and related PM + config ARCH_H1940 bool "IPAQ H1940" select CPU_S3C2410 + select PM_H1940 help Say Y here if you are using the HP IPAQ H1940 @@ -115,6 +122,7 @@ config MACH_VR1000 config MACH_RX3715 bool "HP iPAQ rx3715" select CPU_S3C2440 + select PM_H1940 help Say Y here if you are using the HP iPAQ rx3715. diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index d66013365b6..27663e28cc8 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o +obj-$(CONFIG_PM_H1940) += pm-h1940.o # S3C2412 support obj-$(CONFIG_CPU_S3C2412) += s3c2412.o diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 23d5beea556..379efe70778 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -88,7 +88,7 @@ bast_pc104_mask(unsigned int irqno) static void bast_pc104_maskack(unsigned int irqno) { - struct irqdesc *desc = irq_desc + IRQ_ISA; + struct irq_desc *desc = irq_desc + IRQ_ISA; bast_pc104_mask(irqno); desc->chip->ack(IRQ_ISA); @@ -104,7 +104,7 @@ bast_pc104_unmask(unsigned int irqno) __raw_writeb(temp, BAST_VA_PC104_IRQMASK); } -static struct irqchip bast_pc104_chip = { +static struct irq_chip bast_pc104_chip = { .mask = bast_pc104_mask, .unmask = bast_pc104_unmask, .ack = bast_pc104_maskack @@ -112,7 +112,7 @@ static struct irqchip bast_pc104_chip = { static void bast_irq_pc104_demux(unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { unsigned int stat; unsigned int irqno; @@ -157,7 +157,7 @@ static __init int bast_irq_init(void) unsigned int irqno = bast_pc104_irqs[i]; set_irq_chip(irqno, &bast_pc104_chip); - set_irq_handler(irqno, do_level_IRQ); + set_irq_handler(irqno, handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } } diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index 683b3491ba3..3c0ed7871c5 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -180,7 +180,7 @@ s3c_irq_unmask(unsigned int irqno) __raw_writel(mask, S3C2410_INTMSK); } -struct irqchip s3c_irq_level_chip = { +struct irq_chip s3c_irq_level_chip = { .name = "s3c-level", .ack = s3c_irq_maskack, .mask = s3c_irq_mask, @@ -188,7 +188,7 @@ struct irqchip s3c_irq_level_chip = { .set_wake = s3c_irq_wake }; -static struct irqchip s3c_irq_chip = { +static struct irq_chip s3c_irq_chip = { .name = "s3c", .ack = s3c_irq_ack, .mask = s3c_irq_mask, @@ -206,18 +206,6 @@ s3c_irqext_mask(unsigned int irqno) mask = __raw_readl(S3C24XX_EINTMASK); mask |= ( 1UL << irqno); __raw_writel(mask, S3C24XX_EINTMASK); - - if (irqno <= (IRQ_EINT7 - EXTINT_OFF)) { - /* check to see if all need masking */ - - if ((mask & (0xf << 4)) == (0xf << 4)) { - /* all masked, mask the parent */ - s3c_irq_mask(IRQ_EINT4t7); - } - } else { - /* todo: the same check as above for the rest of the irq regs...*/ - - } } static void @@ -229,7 +217,6 @@ s3c_irqext_ack(unsigned int irqno) bit = 1UL << (irqno - EXTINT_OFF); - mask = __raw_readl(S3C24XX_EINTMASK); __raw_writel(bit, S3C24XX_EINTPEND); @@ -258,8 +245,6 @@ s3c_irqext_unmask(unsigned int irqno) mask = __raw_readl(S3C24XX_EINTMASK); mask &= ~( 1UL << irqno); __raw_writel(mask, S3C24XX_EINTMASK); - - s3c_irq_unmask((irqno <= (IRQ_EINT7 - EXTINT_OFF)) ? IRQ_EINT4t7 : IRQ_EINT8t23); } int @@ -344,7 +329,7 @@ s3c_irqext_type(unsigned int irq, unsigned int type) return 0; } -static struct irqchip s3c_irqext_chip = { +static struct irq_chip s3c_irqext_chip = { .name = "s3c-ext", .mask = s3c_irqext_mask, .unmask = s3c_irqext_unmask, @@ -353,7 +338,7 @@ static struct irqchip s3c_irqext_chip = { .set_wake = s3c_irqext_wake }; -static struct irqchip s3c_irq_eint0t4 = { +static struct irq_chip s3c_irq_eint0t4 = { .name = "s3c-ext0", .ack = s3c_irq_ack, .mask = s3c_irq_mask, @@ -390,7 +375,7 @@ s3c_irq_uart0_ack(unsigned int irqno) s3c_irqsub_maskack(irqno, INTMSK_UART0, 7); } -static struct irqchip s3c_irq_uart0 = { +static struct irq_chip s3c_irq_uart0 = { .name = "s3c-uart0", .mask = s3c_irq_uart0_mask, .unmask = s3c_irq_uart0_unmask, @@ -417,7 +402,7 @@ s3c_irq_uart1_ack(unsigned int irqno) s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3); } -static struct irqchip s3c_irq_uart1 = { +static struct irq_chip s3c_irq_uart1 = { .name = "s3c-uart1", .mask = s3c_irq_uart1_mask, .unmask = s3c_irq_uart1_unmask, @@ -444,7 +429,7 @@ s3c_irq_uart2_ack(unsigned int irqno) s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6); } -static struct irqchip s3c_irq_uart2 = { +static struct irq_chip s3c_irq_uart2 = { .name = "s3c-uart2", .mask = s3c_irq_uart2_mask, .unmask = s3c_irq_uart2_unmask, @@ -471,7 +456,7 @@ s3c_irq_adc_ack(unsigned int irqno) s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9); } -static struct irqchip s3c_irq_adc = { +static struct irq_chip s3c_irq_adc = { .name = "s3c-adc", .mask = s3c_irq_adc_mask, .unmask = s3c_irq_adc_unmask, @@ -480,11 +465,11 @@ static struct irqchip s3c_irq_adc = { /* irq demux for adc */ static void s3c_irq_demux_adc(unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { unsigned int subsrc, submsk; unsigned int offset = 9; - struct irqdesc *mydesc; + struct irq_desc *mydesc; /* read the current pending interrupts, and the mask * for what it is available */ @@ -512,7 +497,7 @@ static void s3c_irq_demux_uart(unsigned int start) { unsigned int subsrc, submsk; unsigned int offset = start - IRQ_S3CUART_RX0; - struct irqdesc *desc; + struct irq_desc *desc; /* read the current pending interrupts, and the mask * for what it is available */ @@ -549,7 +534,7 @@ static void s3c_irq_demux_uart(unsigned int start) static void s3c_irq_demux_uart0(unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { irq = irq; s3c_irq_demux_uart(IRQ_S3CUART_RX0); @@ -557,7 +542,7 @@ s3c_irq_demux_uart0(unsigned int irq, static void s3c_irq_demux_uart1(unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { irq = irq; s3c_irq_demux_uart(IRQ_S3CUART_RX1); @@ -565,7 +550,7 @@ s3c_irq_demux_uart1(unsigned int irq, static void s3c_irq_demux_uart2(unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { irq = irq; s3c_irq_demux_uart(IRQ_S3CUART_RX2); @@ -573,7 +558,7 @@ s3c_irq_demux_uart2(unsigned int irq, static void s3c_irq_demux_extint8(unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); @@ -595,7 +580,7 @@ s3c_irq_demux_extint8(unsigned int irq, static void s3c_irq_demux_extint4t7(unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); @@ -738,7 +723,7 @@ void __init s3c24xx_init_irq(void) case IRQ_UART2: case IRQ_ADCPARENT: set_irq_chip(irqno, &s3c_irq_level_chip); - set_irq_handler(irqno, do_level_IRQ); + set_irq_handler(irqno, handle_level_irq); break; case IRQ_RESERVED6: @@ -749,7 +734,7 @@ void __init s3c24xx_init_irq(void) default: //irqdbf("registering irq %d (s3c irq)\n", irqno); set_irq_chip(irqno, &s3c_irq_chip); - set_irq_handler(irqno, do_edge_IRQ); + set_irq_handler(irqno, handle_edge_irq); set_irq_flags(irqno, IRQF_VALID); } } @@ -769,14 +754,14 @@ void __init s3c24xx_init_irq(void) for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { irqdbf("registering irq %d (ext int)\n", irqno); set_irq_chip(irqno, &s3c_irq_eint0t4); - set_irq_handler(irqno, do_edge_IRQ); + set_irq_handler(irqno, handle_edge_irq); set_irq_flags(irqno, IRQF_VALID); } for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) { irqdbf("registering irq %d (extended s3c irq)\n", irqno); set_irq_chip(irqno, &s3c_irqext_chip); - set_irq_handler(irqno, do_edge_IRQ); + set_irq_handler(irqno, handle_edge_irq); set_irq_flags(irqno, IRQF_VALID); } @@ -787,28 +772,28 @@ void __init s3c24xx_init_irq(void) for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) { irqdbf("registering irq %d (s3c uart0 irq)\n", irqno); set_irq_chip(irqno, &s3c_irq_uart0); - set_irq_handler(irqno, do_level_IRQ); + set_irq_handler(irqno, handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) { irqdbf("registering irq %d (s3c uart1 irq)\n", irqno); set_irq_chip(irqno, &s3c_irq_uart1); - set_irq_handler(irqno, do_level_IRQ); + set_irq_handler(irqno, handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) { irqdbf("registering irq %d (s3c uart2 irq)\n", irqno); set_irq_chip(irqno, &s3c_irq_uart2); - set_irq_handler(irqno, do_level_IRQ); + set_irq_handler(irqno, handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) { irqdbf("registering irq %d (s3c adc irq)\n", irqno); set_irq_chip(irqno, &s3c_irq_adc); - set_irq_handler(irqno, do_edge_IRQ); + set_irq_handler(irqno, handle_edge_irq); set_irq_flags(irqno, IRQF_VALID); } diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h index 842a9f42c97..3686a008224 100644 --- a/arch/arm/mach-s3c2410/irq.h +++ b/arch/arm/mach-s3c2410/irq.h @@ -17,7 +17,7 @@ #define EXTINT_OFF (IRQ_EINT4 - 4) -extern struct irqchip s3c_irq_level_chip; +extern struct irq_chip s3c_irq_level_chip; static inline void s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 8c895c077d2..f5b98099a5d 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -33,6 +33,7 @@ #include <asm/arch/regs-serial.h> #include <asm/arch/regs-lcd.h> +#include <asm/arch/h1940.h> #include <asm/arch/h1940-latch.h> #include <asm/arch/fb.h> @@ -41,6 +42,7 @@ #include "clock.h" #include "devs.h" #include "cpu.h" +#include "pm.h" static struct map_desc h1940_iodesc[] __initdata = { [0] = { @@ -164,12 +166,16 @@ static void __init h1940_map_io(void) s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); s3c24xx_set_board(&h1940_board); + + /* setup PM */ + + memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); + s3c2410_pm_init(); } static void __init h1940_init_irq(void) { s3c24xx_init_irq(); - } static void __init h1940_init(void) diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c index e193ba69e65..a4ab144e729 100644 --- a/arch/arm/mach-s3c2410/mach-osiris.c +++ b/arch/arm/mach-s3c2410/mach-osiris.c @@ -114,6 +114,15 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { .clocks = osiris_serial_clocks, .clocks_size = ARRAY_SIZE(osiris_serial_clocks), }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = osiris_serial_clocks, + .clocks_size = ARRAY_SIZE(osiris_serial_clocks), + } }; /* NAND Flash on Osiris board */ diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index 23d7c052013..ecbcdf79d73 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -42,6 +42,7 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-lcd.h> +#include <asm/arch/h1940.h> #include <asm/arch/nand.h> #include <asm/arch/fb.h> @@ -224,7 +225,9 @@ static void __init rx3715_init_irq(void) static void __init rx3715_init_machine(void) { + memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); s3c2410_pm_init(); + s3c24xx_fb_set_platdata(&rx3715_lcdcfg); } diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index a0d7692cdb2..e2eda3937ab 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -41,6 +41,7 @@ #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> +#include <asm/arch/leds-gpio.h> #include "clock.h" #include "devs.h" @@ -313,6 +314,50 @@ static struct platform_device vr1000_dm9k1 = { } }; +/* LEDS */ + +static struct s3c24xx_led_platdata vr1000_led1_pdata = { + .name = "led1", + .gpio = S3C2410_GPB0, + .def_trigger = "", +}; + +static struct s3c24xx_led_platdata vr1000_led2_pdata = { + .name = "led2", + .gpio = S3C2410_GPB1, + .def_trigger = "", +}; + +static struct s3c24xx_led_platdata vr1000_led3_pdata = { + .name = "led3", + .gpio = S3C2410_GPB2, + .def_trigger = "", +}; + +static struct platform_device vr1000_led1 = { + .name = "s3c24xx_led", + .id = 1, + .dev = { + .platform_data = &vr1000_led1_pdata, + }, +}; + +static struct platform_device vr1000_led2 = { + .name = "s3c24xx_led", + .id = 2, + .dev = { + .platform_data = &vr1000_led2_pdata, + }, +}; + +static struct platform_device vr1000_led3 = { + .name = "s3c24xx_led", + .id = 1, + .dev = { + .platform_data = &vr1000_led3_pdata, + }, +}; + /* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { @@ -325,7 +370,10 @@ static struct platform_device *vr1000_devices[] __initdata = { &serial_device, &vr1000_nor, &vr1000_dm9k0, - &vr1000_dm9k1 + &vr1000_dm9k1, + &vr1000_led1, + &vr1000_led2, + &vr1000_led3, }; static struct clk *vr1000_clocks[] = { diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c2410/pm-h1940.S new file mode 100644 index 00000000000..7d66de7ff7d --- /dev/null +++ b/arch/arm/mach-s3c2410/pm-h1940.S @@ -0,0 +1,33 @@ +/* linux/arch/arm/mach-s3c2410/pm-h1940.S + * + * Copyright (c) 2006 Ben Dooks <ben-linux@fluff.org> + * + * H1940 Suspend to RAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/hardware.h> +#include <asm/arch/map.h> + +#include <asm/arch/regs-gpio.h> + + .text + .global h1940_pm_return + +h1940_pm_return: + mov r0, #S3C2410_PA_GPIO + ldr pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ] diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c index e51d7666951..77c6814c0f0 100644 --- a/arch/arm/mach-s3c2410/s3c2410-pm.c +++ b/arch/arm/mach-s3c2410/s3c2410-pm.c @@ -32,6 +32,7 @@ #include <asm/mach-types.h> #include <asm/arch/regs-gpio.h> +#include <asm/arch/h1940.h> #include "cpu.h" #include "pm.h" @@ -52,6 +53,35 @@ static void s3c2410_pm_prepare(void) DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); + if (machine_is_h1940()) { + void *base = phys_to_virt(H1940_SUSPEND_CHECK); + unsigned long ptr; + unsigned long calc = 0; + + /* generate check for the bootloader to check on resume */ + + for (ptr = 0; ptr < 0x40000; ptr += 0x400) + calc += __raw_readl(base+ptr); + + __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); + } + + /* the RX3715 uses similar code and the same H1940 and the + * same offsets for resume and checksum pointers */ + + if (machine_is_rx3715()) { + void *base = phys_to_virt(H1940_SUSPEND_CHECK); + unsigned long ptr; + unsigned long calc = 0; + + /* generate check for the bootloader to check on resume */ + + for (ptr = 0; ptr < 0x40000; ptr += 0x4) + calc += __raw_readl(base+ptr); + + __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); + } + if ( machine_is_aml_m5900() ) s3c2410_gpio_setpin(S3C2410_GPF2, 1); diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c index 7f741547658..ffcc30b23a8 100644 --- a/arch/arm/mach-s3c2410/s3c2412-irq.c +++ b/arch/arm/mach-s3c2410/s3c2412-irq.c @@ -98,7 +98,7 @@ s3c2412_irq_unmask(unsigned int irqno) __raw_writel(mask & ~bitval, S3C2410_INTMSK); } -static struct irqchip s3c2412_irq_eint0t4 = { +static struct irq_chip s3c2412_irq_eint0t4 = { .ack = s3c2412_irq_ack, .mask = s3c2412_irq_mask, .unmask = s3c2412_irq_unmask, @@ -112,7 +112,7 @@ static int s3c2412_irq_add(struct sys_device *sysdev) for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { set_irq_chip(irqno, &s3c2412_irq_eint0t4); - set_irq_handler(irqno, do_edge_IRQ); + set_irq_handler(irqno, handle_edge_irq); set_irq_flags(irqno, IRQF_VALID); } diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c index 39db0752d53..1ba19b27ab0 100644 --- a/arch/arm/mach-s3c2410/s3c2440-irq.c +++ b/arch/arm/mach-s3c2410/s3c2440-irq.c @@ -42,10 +42,10 @@ /* WDT/AC97 */ static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { unsigned int subsrc, submsk; - struct irqdesc *mydesc; + struct irq_desc *mydesc; /* read the current pending interrupts, and the mask * for what it is available */ @@ -90,7 +90,7 @@ s3c_irq_wdtac97_ack(unsigned int irqno) s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13); } -static struct irqchip s3c_irq_wdtac97 = { +static struct irq_chip s3c_irq_wdtac97 = { .mask = s3c_irq_wdtac97_mask, .unmask = s3c_irq_wdtac97_unmask, .ack = s3c_irq_wdtac97_ack, @@ -105,12 +105,12 @@ static int s3c2440_irq_add(struct sys_device *sysdev) /* add new chained handler for wdt, ac7 */ set_irq_chip(IRQ_WDT, &s3c_irq_level_chip); - set_irq_handler(IRQ_WDT, do_level_IRQ); + set_irq_handler(IRQ_WDT, handle_level_irq); set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { set_irq_chip(irqno, &s3c_irq_wdtac97); - set_irq_handler(irqno, do_level_IRQ); + set_irq_handler(irqno, handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c index 146f2109dd9..ede94636a72 100644 --- a/arch/arm/mach-s3c2410/s3c244x-irq.c +++ b/arch/arm/mach-s3c2410/s3c244x-irq.c @@ -42,10 +42,10 @@ /* camera irq */ static void s3c_irq_demux_cam(unsigned int irq, - struct irqdesc *desc) + struct irq_desc *desc) { unsigned int subsrc, submsk; - struct irqdesc *mydesc; + struct irq_desc *mydesc; /* read the current pending interrupts, and the mask * for what it is available */ @@ -89,7 +89,7 @@ s3c_irq_cam_ack(unsigned int irqno) s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11); } -static struct irqchip s3c_irq_cam = { +static struct irq_chip s3c_irq_cam = { .mask = s3c_irq_cam_mask, .unmask = s3c_irq_cam_unmask, .ack = s3c_irq_cam_ack, @@ -100,18 +100,18 @@ static int s3c244x_irq_add(struct sys_device *sysdev) unsigned int irqno; set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip); - set_irq_handler(IRQ_NFCON, do_level_IRQ); + set_irq_handler(IRQ_NFCON, handle_level_irq); set_irq_flags(IRQ_NFCON, IRQF_VALID); /* add chained handler for camera */ set_irq_chip(IRQ_CAM, &s3c_irq_level_chip); - set_irq_handler(IRQ_CAM, do_level_IRQ); + set_irq_handler(IRQ_CAM, handle_level_irq); set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam); for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { set_irq_chip(irqno, &s3c_irq_cam); - set_irq_handler(irqno, do_level_IRQ); + set_irq_handler(irqno, handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 4575f316e14..e510295c258 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <asm/div64.h> +#include <asm/cnt32_to_63.h> #include <asm/hardware.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -118,15 +119,21 @@ EXPORT_SYMBOL(cpufreq_get); /* * This is the SA11x0 sched_clock implementation. This has - * a resolution of 271ns, and a maximum value of 1165s. + * a resolution of 271ns, and a maximum value of 32025597s (370 days). + * + * The return value is guaranteed to be monotonic in that range as + * long as there is always less than 582 seconds between successive + * calls to this function. + * * ( * 1E9 / 3686400 => * 78125 / 288) */ unsigned long long sched_clock(void) { - unsigned long long v; + unsigned long long v = cnt32_to_63(OSCR); - v = (unsigned long long)OSCR * 78125; - do_div(v, 288); + /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */ + v *= 78125<<1; + do_div(v, 288<<1); return v; } diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index fa6dc71bd6a..b034ad69a32 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -702,7 +702,7 @@ static u32 gpio_irq_mask[] = { GPIO2_SD_CON_SLT, }; -static void h3800_IRQ_demux(unsigned int irq, struct irqdesc *desc) +static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc) { int i; @@ -719,14 +719,14 @@ static void h3800_IRQ_demux(unsigned int irq, struct irqdesc *desc) if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq); for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++) if (irq & kpio_irq_mask[j]) - do_edge_IRQ(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j); + handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j); /* GPIO2 */ irq = H3800_ASIC2_GPIINTFLAG; if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq); for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++) if (irq & gpio_irq_mask[j]) - do_edge_IRQ(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j); + handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j); } if (i >= MAX_ASIC_ISR_LOOPS) diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index f4c6322ca33..5642aeca079 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -110,7 +110,7 @@ static struct irq_chip sa1100_low_gpio_chip = { * and call the handler. */ static void -sa1100_high_gpio_handler(unsigned int irq, struct irqdesc *desc) +sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc) { unsigned int mask; @@ -327,19 +327,19 @@ void __init sa1100_init_irq(void) for (irq = 0; irq <= 10; irq++) { set_irq_chip(irq, &sa1100_low_gpio_chip); - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } for (irq = 12; irq <= 31; irq++) { set_irq_chip(irq, &sa1100_normal_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } for (irq = 32; irq <= 48; irq++) { set_irq_chip(irq, &sa1100_high_gpio_chip); - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 354d5e91da5..075d4d1d63b 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -29,12 +29,12 @@ * is rather unfortunate. */ static void -neponset_irq_handler(unsigned int irq, struct irqdesc *desc) +neponset_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned int irr; while (1) { - struct irqdesc *d; + struct irq_desc *d; /* * Acknowledge the parent IRQ. @@ -168,9 +168,9 @@ static int neponset_probe(struct platform_device *dev) * Setup other Neponset IRQs. SA1111 will be done by the * generic SA1111 code. */ - set_irq_handler(IRQ_NEPONSET_SMC9196, do_simple_IRQ); + set_irq_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq); set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE); - set_irq_handler(IRQ_NEPONSET_USAR, do_simple_IRQ); + set_irq_handler(IRQ_NEPONSET_USAR, handle_simple_irq); set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE); /* diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 4284bd6f7a1..29c89f9eb2c 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -118,6 +118,7 @@ static struct irqaction sa1100_timer_irq = { static void __init sa1100_timer_init(void) { struct timespec tv; + unsigned long flags; set_rtc = sa1100_set_rtc; @@ -126,12 +127,12 @@ static void __init sa1100_timer_init(void) do_settimeofday(&tv); OIER = 0; /* disable any timer interrupts */ - OSCR = LATCH*2; /* push OSCR out of the way */ - OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &sa1100_timer_irq); + local_irq_save(flags); OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer */ + OSMR0 = OSCR + LATCH; /* set initial match */ + local_irq_restore(flags); } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c index 297ecf13065..00a6c146686 100644 --- a/arch/arm/mach-shark/irq.c +++ b/arch/arm/mach-shark/irq.c @@ -82,7 +82,7 @@ void __init shark_init_irq(void) for (irq = 0; irq < NR_IRQS; irq++) { set_irq_chip(irq, &fb_chip); - set_irq_handler(irq, do_edge_IRQ); + set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 3b8576111c1..57196947559 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -27,6 +27,7 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> +#include <asm/cnt32_to_63.h> #include <asm/system.h> #include <asm/hardware.h> #include <asm/io.h> @@ -77,7 +78,7 @@ static struct irq_chip sic_chip = { }; static void -sic_handle_irq(unsigned int irq, struct irqdesc *desc) +sic_handle_irq(unsigned int irq, struct irq_desc *desc) { unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS); @@ -123,7 +124,7 @@ void __init versatile_init_irq(void) for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) { if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) { set_irq_chip(i, &sic_chip); - set_irq_handler(i, do_level_IRQ); + set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } } @@ -228,14 +229,19 @@ void __init versatile_map_io(void) /* * This is the Versatile sched_clock implementation. This has - * a resolution of 41.7ns, and a maximum value of about 179s. + * a resolution of 41.7ns, and a maximum value of about 35583 days. + * + * The return value is guaranteed to be monotonic in that range as + * long as there is always less than 89 seconds between successive + * calls to this function. */ unsigned long long sched_clock(void) { - unsigned long long v; + unsigned long long v = cnt32_to_63(readl(VERSATILE_REFCOUNTER)); - v = (unsigned long long)readl(VERSATILE_REFCOUNTER) * 125; - do_div(v, 3); + /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */ + v *= 125<<1; + do_div(v, 3<<1); return v; } diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 503725b166f..be439bb9d45 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -81,22 +81,18 @@ static struct amba_device *amba_devs[] __initdata = { &mmc1_device, }; -static int __init versatile_pb_init(void) +static void __init versatile_pb_init(void) { int i; - if (machine_is_versatile_pb()) { - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - } + versatile_init(); - return 0; + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } } -arch_initcall(versatile_pb_init); - MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .phys_io = 0x101f1000, @@ -105,5 +101,5 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") .map_io = versatile_map_io, .init_irq = versatile_init_irq, .timer = &versatile_timer, - .init_machine = versatile_init, + .init_machine = versatile_pb_init, MACHINE_END diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 4c4dae6901f..125cb3ff558 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -580,7 +580,7 @@ config CPU_CACHE_ROUND_ROBIN config CPU_BPREDICT_DISABLE bool "Disable branch prediction" - depends on CPU_ARM1020 || CPU_V6 + depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 help Say Y here to disable branch prediction. If unsure, say N. diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index bb2bc9ab6bd..a44e3097063 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -1,4 +1,7 @@ /* the upper-most page table pointer */ + +#ifdef CONFIG_MMU + extern pmd_t *top_pmd; #define TOP_PTE(x) pte_offset_kernel(top_pmd, x) @@ -13,6 +16,8 @@ static inline pmd_t *pmd_off_k(unsigned long virt) return pmd_off(pgd_offset_k(virt), virt); } +#endif + struct map_desc; struct meminfo; struct pglist_data; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index f866bf6b97d..b7f194af20b 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -265,7 +265,7 @@ static void __init build_mem_type_table(void) if (arch_is_coherent()) { if (cpu_is_xsc3()) { mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT; + mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; } } @@ -619,6 +619,13 @@ void __init reserve_node_zero(pg_data_t *pgdat) if (machine_is_p720t()) res_size = 0x00014000; + /* H1940 and RX3715 need to reserve this for suspend */ + + if (machine_is_h1940() || machine_is_rx3715()) { + reserve_bootmem_node(pgdat, 0x30003000, 0x1000); + reserve_bootmem_node(pgdat, 0x30081000, 0x1000); + } + #ifdef CONFIG_SA1111 /* * Because of the SA1111 DMA bug, we want to preserve our diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index d0e66424a59..05818fc0c70 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -6,10 +6,12 @@ #include <linux/module.h> #include <linux/mm.h> #include <linux/pagemap.h> +#include <linux/bootmem.h> #include <asm/cacheflush.h> #include <asm/io.h> #include <asm/page.h> +#include <asm/mach/arch.h> #include "mm.h" @@ -76,7 +78,7 @@ void __iomem *__ioremap(unsigned long phys_addr, size_t size, } EXPORT_SYMBOL(__ioremap); -void __iounmap(void __iomem *addr) +void __iounmap(volatile void __iomem *addr) { } EXPORT_SYMBOL(__iounmap); diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 1d8316f3cec..289b8e6f504 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -29,9 +29,9 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 89b1d6d3d7c..bed9db6ba58 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -29,9 +29,9 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index a089528e6bc..d2a7c1b9cab 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -18,9 +18,9 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index d6d84d92c7c..3247ce5c017 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -18,9 +18,9 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 0432e480688..ce4f9eef763 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -15,9 +15,9 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> ENTRY(cpu_arm6_dcache_clean_area) diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index c2f0705bfd4..c04c194da78 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -36,9 +36,9 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 40713818a87..7069f495cf9 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -12,9 +12,9 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> .text diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 22d7e3100ea..d091c257182 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -12,9 +12,9 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> .text diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 4adb46b3a4e..65cbb2851bf 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -28,9 +28,9 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/page.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 571f082f024..52761b70d73 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -29,9 +29,9 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/page.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 8d9a9f93b01..5b74339d158 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -52,9 +52,9 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/page.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 44a7a652d62..8628ed29a95 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -28,9 +28,9 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/page.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 2397f4b6e15..786c593778f 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -11,9 +11,9 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> /* ARM940T has a 4KB DCache comprising 256 lines of 4 words */ diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index e1861756442..a60c1421d45 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -13,9 +13,9 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> /* diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 918ebf65d4f..4848eeac86b 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -12,9 +12,9 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/elf.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#include <asm/procinfo.h> #include <asm/ptrace.h> .text diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index c878064e9b8..cd7d865c9d1 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -17,7 +17,7 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> -#include <asm/procinfo.h> +#include <asm/elf.h> #include <asm/hardware.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index b23b66a6155..b776653cc31 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -22,7 +22,7 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> -#include <asm/procinfo.h> +#include <asm/elf.h> #include <asm/hardware.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 6f72549f884..b440c8a1d34 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -13,8 +13,8 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/elf.h> #include <asm/hardware/arm_scu.h> -#include <asm/procinfo.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 4ace2d8090c..1ef564d0957 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -27,7 +27,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/procinfo.h> +#include <asm/elf.h> #include <asm/hardware.h> #include <asm/pgtable.h> #include <asm/pgtable-hwdef.h> @@ -57,11 +57,6 @@ #define L2_CACHE_ENABLE 1 /* - * Enable the Branch Target Buffer (can cause crashes, see erratum #42.) - */ -#define BTB_ENABLE 0 - -/* * This macro is used to wait for a CP15 write and is needed * when we have to ensure that the last operation to the co-pro * was completed before continuing with operation. @@ -371,8 +366,10 @@ ENTRY(cpu_xsc3_switch_mm) ENTRY(cpu_xsc3_set_pte) str r1, [r0], #-2048 @ linux version - bic r2, r1, #0xdf0 @ Keep C, B, coherency bits + bic r2, r1, #0xff0 @ Keep C, B bits orr r2, r2, #PTE_TYPE_EXT @ extended page + tst r1, #L_PTE_SHARED @ Shared? + orrne r2, r2, #0x200 eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY @@ -432,9 +429,7 @@ __xsc3_setup: mrc p15, 0, r0, c1, c0, 0 @ get control register bic r0, r0, r5 @ .... .... .... ..A. orr r0, r0, r6 @ .... .... .... .C.M -#if BTB_ENABLE orr r0, r0, #0x00000800 @ ..VI Z..S .... .... -#endif #if L2_CACHE_ENABLE orr r0, r0, #0x04000000 @ L2 enable #endif diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 2749c1f88d7..cc1004b3e51 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -23,7 +23,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/procinfo.h> +#include <asm/elf.h> #include <asm/pgtable.h> #include <asm/pgtable-hwdef.h> #include <asm/page.h> @@ -491,12 +491,7 @@ __xscale_setup: mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs -#ifdef CONFIG_IWMMXT - mov r0, #0 @ initially disallow access to CP0/CP1 -#else - mov r0, #1 @ Allow access to CP0 -#endif - orr r0, r0, #1 << 6 @ cp6 for IOP3xx and Bulverde + mov r0, #1 << 6 @ cp6 for IOP3xx and Bulverde orr r0, r0, #1 << 13 @ Its undefined whether this mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes @@ -909,7 +904,7 @@ __pxa270_proc_info: b __xscale_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_IWMMXT + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP .long cpu_pxa270_name .long xscale_processor_functions .long v4wbi_tlb_fns diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 8162eed8b50..4f2fd559133 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -410,7 +410,7 @@ static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int tr trigger & __IRQT_RISEDGE); MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, trigger & __IRQT_FALEDGE); - /* FIXME: Possibly do 'set_irq_handler(j, do_level_IRQ)' if only level + /* FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only level * triggering requested. */ } @@ -783,7 +783,7 @@ void omap_free_gpio(int gpio) * line's interrupt handler has been run, we may miss some nested * interrupts. */ -static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc) +static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { void __iomem *isr_reg = NULL; u32 isr; @@ -853,7 +853,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc) gpio_irq = bank->virtual_irq_start; for (; isr != 0; isr >>= 1, gpio_irq++) { - struct irqdesc *d; + struct irq_desc *d; int irq_mask; if (!(isr & 1)) continue; @@ -1092,7 +1092,7 @@ static int __init _omap_gpio_init(void) set_irq_chip(j, &mpuio_irq_chip); else set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, do_simple_IRQ); + set_irq_handler(j, handle_simple_irq); set_irq_flags(j, IRQF_VALID); } set_irq_chained_handler(bank->irq, gpio_irq_handler); diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 9e3e2a69c03..fd5475071ac 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -80,12 +80,38 @@ static int amba_resume(struct device *dev) return ret; } +#define amba_attr_func(name,fmt,arg...) \ +static ssize_t name##_show(struct device *_dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct amba_device *dev = to_amba_device(_dev); \ + return sprintf(buf, fmt, arg); \ +} + +#define amba_attr(name,fmt,arg...) \ +amba_attr_func(name,fmt,arg) \ +static DEVICE_ATTR(name, S_IRUGO, name##_show, NULL) + +amba_attr_func(id, "%08x\n", dev->periphid); +amba_attr(irq0, "%u\n", dev->irq[0]); +amba_attr(irq1, "%u\n", dev->irq[1]); +amba_attr_func(resource, "\t%016llx\t%016llx\t%016lx\n", + (unsigned long long)dev->res.start, (unsigned long long)dev->res.end, + dev->res.flags); + +static struct device_attribute amba_dev_attrs[] = { + __ATTR_RO(id), + __ATTR_RO(resource), + __ATTR_NULL, +}; + /* * Primecells are part of the Advanced Microcontroller Bus Architecture, * so we call the bus "amba". */ static struct bus_type amba_bustype = { .name = "amba", + .dev_attrs = amba_dev_attrs, .match = amba_match, .uevent = amba_uevent, .suspend = amba_suspend, @@ -169,21 +195,6 @@ static void amba_device_release(struct device *dev) kfree(d); } -#define amba_attr(name,fmt,arg...) \ -static ssize_t show_##name(struct device *_dev, struct device_attribute *attr, char *buf) \ -{ \ - struct amba_device *dev = to_amba_device(_dev); \ - return sprintf(buf, fmt, arg); \ -} \ -static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL) - -amba_attr(id, "%08x\n", dev->periphid); -amba_attr(irq0, "%u\n", dev->irq[0]); -amba_attr(irq1, "%u\n", dev->irq[1]); -amba_attr(resource, "\t%016llx\t%016llx\t%016lx\n", - (unsigned long long)dev->res.start, (unsigned long long)dev->res.end, - dev->res.flags); - /** * amba_device_register - register an AMBA device * @dev: AMBA device to register @@ -208,40 +219,46 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) dev_warn(&dev->dev, "coherent dma mask is unset\n"); ret = request_resource(parent, &dev->res); - if (ret == 0) { - tmp = ioremap(dev->res.start, SZ_4K); - if (!tmp) { - ret = -ENOMEM; - goto out; - } - - for (pid = 0, i = 0; i < 4; i++) - pid |= (readl(tmp + 0xfe0 + 4 * i) & 255) << (i * 8); - for (cid = 0, i = 0; i < 4; i++) - cid |= (readl(tmp + 0xff0 + 4 * i) & 255) << (i * 8); - - iounmap(tmp); - - if (cid == 0xb105f00d) - dev->periphid = pid; - - if (dev->periphid) - ret = device_register(&dev->dev); - else - ret = -ENODEV; - - if (ret == 0) { - device_create_file(&dev->dev, &dev_attr_id); - if (dev->irq[0] != NO_IRQ) - device_create_file(&dev->dev, &dev_attr_irq0); - if (dev->irq[1] != NO_IRQ) - device_create_file(&dev->dev, &dev_attr_irq1); - device_create_file(&dev->dev, &dev_attr_resource); - } else { - out: - release_resource(&dev->res); - } + if (ret) + goto err_out; + + tmp = ioremap(dev->res.start, SZ_4K); + if (!tmp) { + ret = -ENOMEM; + goto err_release; } + + for (pid = 0, i = 0; i < 4; i++) + pid |= (readl(tmp + 0xfe0 + 4 * i) & 255) << (i * 8); + for (cid = 0, i = 0; i < 4; i++) + cid |= (readl(tmp + 0xff0 + 4 * i) & 255) << (i * 8); + + iounmap(tmp); + + if (cid == 0xb105f00d) + dev->periphid = pid; + + if (!dev->periphid) { + ret = -ENODEV; + goto err_release; + } + + ret = device_register(&dev->dev); + if (ret) + goto err_release; + + if (dev->irq[0] != NO_IRQ) + ret = device_create_file(&dev->dev, &dev_attr_irq0); + if (ret == 0 && dev->irq[1] != NO_IRQ) + ret = device_create_file(&dev->dev, &dev_attr_irq1); + if (ret == 0) + return ret; + + device_unregister(&dev->dev); + + err_release: + release_resource(&dev->res); + err_out: return ret; } diff --git a/drivers/char/watchdog/at91rm9200_wdt.c b/drivers/char/watchdog/at91rm9200_wdt.c index 4e7a1145e78..cb86967e2c5 100644 --- a/drivers/char/watchdog/at91rm9200_wdt.c +++ b/drivers/char/watchdog/at91rm9200_wdt.c @@ -21,6 +21,7 @@ #include <linux/watchdog.h> #include <asm/bitops.h> #include <asm/uaccess.h> +#include <asm/arch/at91_st.h> #define WDT_DEFAULT_TIME 5 /* seconds */ diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index c95a6c15416..c3b1567c852 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -358,133 +358,6 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) #ifdef CONFIG_I2C_PXA_SLAVE /* - * I2C EEPROM emulation. - */ -static struct i2c_eeprom_emu eeprom = { - .size = I2C_EEPROM_EMU_SIZE, - .watch = LIST_HEAD_INIT(eeprom.watch), -}; - -struct i2c_eeprom_emu *i2c_pxa_get_eeprom(void) -{ - return &eeprom; -} - -int i2c_eeprom_emu_addwatcher(struct i2c_eeprom_emu *emu, void *data, - unsigned int addr, unsigned int size, - struct i2c_eeprom_emu_watcher *watcher) -{ - struct i2c_eeprom_emu_watch *watch; - unsigned long flags; - - if (addr + size > emu->size) - return -EINVAL; - - watch = kmalloc(sizeof(struct i2c_eeprom_emu_watch), GFP_KERNEL); - if (watch) { - watch->start = addr; - watch->end = addr + size - 1; - watch->ops = watcher; - watch->data = data; - - local_irq_save(flags); - list_add(&watch->node, &emu->watch); - local_irq_restore(flags); - } - - return watch ? 0 : -ENOMEM; -} - -void i2c_eeprom_emu_delwatcher(struct i2c_eeprom_emu *emu, void *data, - struct i2c_eeprom_emu_watcher *watcher) -{ - struct i2c_eeprom_emu_watch *watch, *n; - unsigned long flags; - - list_for_each_entry_safe(watch, n, &emu->watch, node) { - if (watch->ops == watcher && watch->data == data) { - local_irq_save(flags); - list_del(&watch->node); - local_irq_restore(flags); - kfree(watch); - } - } -} - -static void i2c_eeprom_emu_event(void *ptr, i2c_slave_event_t event) -{ - struct i2c_eeprom_emu *emu = ptr; - - eedbg(3, "i2c_eeprom_emu_event: %d\n", event); - - switch (event) { - case I2C_SLAVE_EVENT_START_WRITE: - emu->seen_start = 1; - eedbg(2, "i2c_eeprom: write initiated\n"); - break; - - case I2C_SLAVE_EVENT_START_READ: - emu->seen_start = 0; - eedbg(2, "i2c_eeprom: read initiated\n"); - break; - - case I2C_SLAVE_EVENT_STOP: - emu->seen_start = 0; - eedbg(2, "i2c_eeprom: received stop\n"); - break; - - default: - eedbg(0, "i2c_eeprom: unhandled event\n"); - break; - } -} - -static int i2c_eeprom_emu_read(void *ptr) -{ - struct i2c_eeprom_emu *emu = ptr; - int ret; - - ret = emu->bytes[emu->ptr]; - emu->ptr = (emu->ptr + 1) % emu->size; - - return ret; -} - -static void i2c_eeprom_emu_write(void *ptr, unsigned int val) -{ - struct i2c_eeprom_emu *emu = ptr; - struct i2c_eeprom_emu_watch *watch; - - if (emu->seen_start != 0) { - eedbg(2, "i2c_eeprom_emu_write: setting ptr %02x\n", val); - emu->ptr = val; - emu->seen_start = 0; - return; - } - - emu->bytes[emu->ptr] = val; - - eedbg(1, "i2c_eeprom_emu_write: ptr=0x%02x, val=0x%02x\n", - emu->ptr, val); - - list_for_each_entry(watch, &emu->watch, node) { - if (!watch->ops || !watch->ops->write) - continue; - if (watch->start <= emu->ptr && watch->end >= emu->ptr) - watch->ops->write(watch->data, emu->ptr, val); - } - - emu->ptr = (emu->ptr + 1) % emu->size; -} - -struct i2c_slave_client eeprom_client = { - .data = &eeprom, - .event = i2c_eeprom_emu_event, - .read = i2c_eeprom_emu_read, - .write = i2c_eeprom_emu_write -}; - -/* * PXA I2C Slave mode */ @@ -963,11 +836,9 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->slave_addr = I2C_PXA_SLAVE_ADDR; #ifdef CONFIG_I2C_PXA_SLAVE - i2c->slave = &eeprom_client; if (plat) { i2c->slave_addr = plat->slave_addr; - if (plat->slave) - i2c->slave = plat->slave; + i2c->slave = plat->slave; } #endif diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index ea41852ec8c..fbef8da6004 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -91,11 +91,11 @@ config MMC_AU1X If unsure, say N. -config MMC_AT91RM9200 - tristate "AT91RM9200 SD/MMC Card Interface support" - depends on ARCH_AT91RM9200 && MMC +config MMC_AT91 + tristate "AT91 SD/MMC Card Interface support" + depends on ARCH_AT91 && MMC help - This selects the AT91RM9200 MCI controller. + This selects the AT91 MCI controller. If unsure, say N. diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index acfd4de0aba..83ffb9326a5 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -22,7 +22,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o -obj-$(CONFIG_MMC_AT91RM9200) += at91_mci.o +obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o mmc_core-y := mmc.o mmc_sysfs.o diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c index 494b23fb0a0..41761f7189a 100644 --- a/drivers/mmc/at91_mci.c +++ b/drivers/mmc/at91_mci.c @@ -73,8 +73,8 @@ #include <asm/mach/mmc.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> -#include <asm/arch/at91rm9200_mci.h> -#include <asm/arch/at91rm9200_pdc.h> +#include <asm/arch/at91_mci.h> +#include <asm/arch/at91_pdc.h> #define DRIVER_NAME "at91_mci" diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 3bcb7dc3299..69796670351 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -23,9 +23,9 @@ #include <asm/io.h> #include <asm/sizes.h> -#include <asm/arch/at91rm9200.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> +#include <asm/arch/at91rm9200_mc.h> /* diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 391a1f4167a..9217ee6c786 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1,5 +1,5 @@ /* - * linux/drivers/char/at91_serial.c + * linux/drivers/char/atmel_serial.c * * Driver for Atmel AT91 / AT32 Serial ports * Copyright (C) 2003 Rick Bronson @@ -36,11 +36,11 @@ #include <asm/io.h> -#include <asm/arch/at91rm9200_pdc.h> #include <asm/mach/serial_at91.h> #include <asm/arch/board.h> +#include <asm/arch/at91_pdc.h> #ifdef CONFIG_ARM -#include <asm/arch/system.h> +#include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #endif @@ -137,8 +137,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) unsigned int control = 0; unsigned int mode; -#ifdef CONFIG_ARM - if (arch_identify() == ARCH_ID_AT91RM9200) { +#ifdef CONFIG_ARCH_AT91RM9200 + if (cpu_is_at91rm9200()) { /* * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21. * We need to drive the pin manually. diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h index eced2ad1a8d..fe1763b2a6d 100644 --- a/drivers/serial/atmel_serial.h +++ b/drivers/serial/atmel_serial.h @@ -31,8 +31,8 @@ #define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */ #define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ #define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */ -#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable */ -#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */ +#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */ +#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */ #define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */ #define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */ @@ -92,9 +92,9 @@ #define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ #define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */ #define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */ -#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change */ -#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change */ -#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */ +#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */ +#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */ +#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */ #define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */ #define ATMEL_US_RI (1 << 20) /* RI */ #define ATMEL_US_DSR (1 << 21) /* DSR */ @@ -106,6 +106,7 @@ #define ATMEL_US_CSR 0x14 /* Channel Status Register */ #define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ #define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ +#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [SAM9 only] */ #define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ #define ATMEL_US_CD (0xffff << 0) /* Clock Divider */ diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index f9b1719b9a3..9980a4ddfed 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_S3C2410 default y if PXA27x default y if ARCH_EP93XX - default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261) + default y if ARCH_AT91 default y if ARCH_PNX4008 # PPC: default y if STB03xxx diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index bbbc82a8336..4097a86c4b5 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -189,7 +189,7 @@ config USB_OTG config USB_GADGET_AT91 boolean "AT91 USB Device Port" - depends on ARCH_AT91RM9200 + depends on ARCH_AT91 select USB_GADGET_SELECTED help Many Atmel AT91 processors (such as the AT91RM2000) have a diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index ea4714e557e..4776b3bdf9c 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -935,7 +935,7 @@ MODULE_LICENSE ("GPL"); #include "ohci-ppc-soc.c" #endif -#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261) +#ifdef CONFIG_ARCH_AT91 #include "ohci-at91.c" #endif @@ -952,8 +952,7 @@ MODULE_LICENSE ("GPL"); || defined (CONFIG_ARCH_EP93XX) \ || defined (CONFIG_SOC_AU1X00) \ || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \ - || defined (CONFIG_ARCH_AT91RM9200) \ - || defined (CONFIG_ARCH_AT91SAM9261) \ + || defined (CONFIG_ARCH_AT91) \ || defined (CONFIG_ARCH_PNX4008) \ ) #error "missing bus glue for ohci-hcd" diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h index 24b51cccde8..9eceb414892 100644 --- a/include/asm-arm/arch-aaec2000/memory.h +++ b/include/asm-arm/arch-aaec2000/memory.h @@ -17,8 +17,6 @@ #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) -#ifdef CONFIG_DISCONTIGMEM - /* * The nodes are the followings: * @@ -27,42 +25,6 @@ * node 2: 0xf800.0000 - 0xfbff.ffff * node 3: 0xfc00.0000 - 0xffff.ffff */ - -/* - * Given a kernel address, find the home node of the underlying memory. - */ -#define KVADDR_TO_NID(addr) \ - (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MAX_MEM_SHIFT) - -/* - * Given a page frame number, convert it to a node id. - */ -#define PFN_TO_NID(pfn) \ - (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MAX_MEM_SHIFT - PAGE_SHIFT)) - -/* - * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory - * and return the mem_map of that node. - */ -#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) - -/* - * Given a page frame number, find the owning node of the memory - * and return the mem_map of that node. - */ -#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ -#define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & (NODE_MAX_MEM_SIZE - 1)) >> PAGE_SHIFT) - -#define NODE_MAX_MEM_SHIFT 26 -#define NODE_MAX_MEM_SIZE (1 << NODE_MAX_MEM_SHIFT) - -#endif /* CONFIG_DISCONTIGMEM */ +#define NODE_MEM_SIZE_BITS 26 #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/include/asm-arm/arch-at91rm9200/at91_aic.h b/include/asm-arm/arch-at91rm9200/at91_aic.h new file mode 100644 index 00000000000..267e69812e2 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_aic.h @@ -0,0 +1,53 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_aic.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Advanced Interrupt Controller (AIC) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_AIC_H +#define AT91_AIC_H + +#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */ +#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ +#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ +#define AT91_AIC_SRCTYPE_LOW (0 << 5) +#define AT91_AIC_SRCTYPE_FALLING (1 << 5) +#define AT91_AIC_SRCTYPE_HIGH (2 << 5) +#define AT91_AIC_SRCTYPE_RISING (3 << 5) + +#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ +#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */ +#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */ +#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */ +#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ + +#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */ +#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */ +#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */ +#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ +#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ + +#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */ +#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */ +#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */ +#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */ +#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */ +#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */ +#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */ +#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ +#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ + +#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */ +#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */ +#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91_dbgu.h b/include/asm-arm/arch-at91rm9200/at91_dbgu.h new file mode 100644 index 00000000000..e4b8b27acfc --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_dbgu.h @@ -0,0 +1,45 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_dbgu.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Debug Unit (DBGU) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_DBGU_H +#define AT91_DBGU_H + +#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */ +#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */ +#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */ +#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ +#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ +#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */ +#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */ +#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */ +#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ +#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ +#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ + +#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ +#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ +#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */ +#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */ +#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */ +#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */ +#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */ +#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */ +#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ +#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ + +#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */ +#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91rm9200/at91_ecc.h new file mode 100644 index 00000000000..fddf256a98d --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_ecc.h @@ -0,0 +1,38 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_ecc.h + * + * Error Corrected Code Controller (ECC) - System peripherals regsters. + * Based on AT91SAM9260 datasheet revision B. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef AT91_ECC_H +#define AT91_ECC_H + +#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */ +#define AT91_ECC_RST (1 << 0) /* Reset parity */ + +#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */ +#define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */ +#define AT91_ECC_PAGESIZE_528 (0) +#define AT91_ECC_PAGESIZE_1056 (1) +#define AT91_ECC_PAGESIZE_2112 (2) +#define AT91_ECC_PAGESIZE_4224 (3) + +#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ +#define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */ +#define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ +#define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */ + +#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ +#define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */ +#define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ + +#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ +#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91_lcdc.h b/include/asm-arm/arch-at91rm9200/at91_lcdc.h new file mode 100644 index 00000000000..9cbfcdd3c47 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_lcdc.h @@ -0,0 +1,148 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_lcdc.h + * + * LCD Controller (LCDC). + * Based on AT91SAM9261 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_LCDC_H +#define AT91_LCDC_H + +#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */ +#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */ +#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */ +#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */ +#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */ +#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */ + +#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */ +#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */ +#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */ + +#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */ +#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */ +#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */ +#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */ + +#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */ +#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */ +#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */ +#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */ + +#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */ +#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */ +#define AT91_LCDC_DISTYPE_STNMONO (0 << 0) +#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0) +#define AT91_LCDC_DISTYPE_TFT (2 << 0) +#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */ +#define AT91_LCDC_SCANMOD_SINGLE (0 << 2) +#define AT91_LCDC_SCANMOD_DUAL (1 << 2) +#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */ +#define AT91_LCDC_IFWIDTH_4 (0 << 3) +#define AT91_LCDC_IFWIDTH_8 (1 << 3) +#define AT91_LCDC_IFWIDTH_16 (2 << 3) +#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */ +#define AT91_LCDC_PIXELSIZE_1 (0 << 5) +#define AT91_LCDC_PIXELSIZE_2 (1 << 5) +#define AT91_LCDC_PIXELSIZE_4 (2 << 5) +#define AT91_LCDC_PIXELSIZE_8 (3 << 5) +#define AT91_LCDC_PIXELSIZE_16 (4 << 5) +#define AT91_LCDC_PIXELSIZE_24 (5 << 5) +#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */ +#define AT91_LCDC_INVVD_NORMAL (0 << 8) +#define AT91_LCDC_INVVD_INVERTED (1 << 8) +#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */ +#define AT91_LCDC_INVFRAME_NORMAL (0 << 9) +#define AT91_LCDC_INVFRAME_INVERTED (1 << 9) +#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */ +#define AT91_LCDC_INVLINE_NORMAL (0 << 10) +#define AT91_LCDC_INVLINE_INVERTED (1 << 10) +#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */ +#define AT91_LCDC_INVCLK_NORMAL (0 << 11) +#define AT91_LCDC_INVCLK_INVERTED (1 << 11) +#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */ +#define AT91_LCDC_INVDVAL_NORMAL (0 << 12) +#define AT91_LCDC_INVDVAL_INVERTED (1 << 12) +#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */ +#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15) +#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15) +#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */ +#define AT91_LCDC_MEMOR_BIG (0 << 31) +#define AT91_LCDC_MEMOR_LITTLE (1 << 31) + +#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */ +#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */ +#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */ +#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */ +#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */ + +#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */ +#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */ +#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */ +#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */ + +#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */ +#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */ +#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */ + +#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */ +#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */ + +#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */ +#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */ +#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */ +#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */ +#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */ +#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */ +#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */ +#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */ +#define AT91_LCDC_DP1_2_VAL (0xff) +#define AT91_LCDC_DP4_7_VAL (0xfffffff) +#define AT91_LCDC_DP3_5_VAL (0xfffff) +#define AT91_LCDC_DP2_3_VAL (0xfff) +#define AT91_LCDC_DP5_7_VAL (0xfffffff) +#define AT91_LCDC_DP3_4_VAL (0xffff) +#define AT91_LCDC_DP4_5_VAL (0xfffff) +#define AT91_LCDC_DP6_7_VAL (0xfffffff) + +#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */ +#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */ +#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */ +#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */ + +#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */ +#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */ +#define AT91_LCDC_PS_DIV1 (0 << 0) +#define AT91_LCDC_PS_DIV2 (1 << 0) +#define AT91_LCDC_PS_DIV4 (2 << 0) +#define AT91_LCDC_PS_DIV8 (3 << 0) +#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */ +#define AT91_LCDC_POL_NEGATIVE (0 << 2) +#define AT91_LCDC_POL_POSITIVE (1 << 2) +#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */ +#define AT91_LCDC_ENA_PWMDISABLE (0 << 3) +#define AT91_LCDC_ENA_PWMENABLE (1 << 3) + +#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */ +#define AT91_LCDC_CVAL (0xff) /* PWM compare value */ + +#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */ +#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */ +#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */ +#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */ +#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */ +#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */ +#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */ +#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */ +#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */ +#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */ +#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */ + +#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h b/include/asm-arm/arch-at91rm9200/at91_mci.h index f28636d61e3..9a552cb743c 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h +++ b/include/asm-arm/arch-at91rm9200/at91_mci.h @@ -1,11 +1,11 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200_mci.h + * include/asm-arm/arch-at91rm9200/at91_mci.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People * * MultiMedia Card Interface (MCI) registers. - * Based on AT91RM9200 datasheet revision E. + * Based on AT91RM9200 datasheet revision F. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,8 +13,8 @@ * (at your option) any later version. */ -#ifndef AT91RM9200_MCI_H -#define AT91RM9200_MCI_H +#ifndef AT91_MCI_H +#define AT91_MCI_H #define AT91_MCI_CR 0x00 /* Control Register */ #define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */ @@ -25,10 +25,10 @@ #define AT91_MCI_MR 0x04 /* Mode Register */ #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ -#define AT91_MCI_PWSDIV (3 << 8) /* Power Saving Divider */ +#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */ #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ -#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ +#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ #define AT91_MCI_DTOR 0x08 /* Data Timeout Register */ #define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */ @@ -43,8 +43,8 @@ #define AT91_MCI_DTOMUL_1M (7 << 4) #define AT91_MCI_SDCR 0x0c /* SD Card Register */ -#define AT91_MCI_SDCSEL (0xf << 0) /* SD Card Selector */ -#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */ +#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */ +#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */ #define AT91_MCI_ARGR 0x10 /* Argument Register */ @@ -78,18 +78,20 @@ #define AT91_MCI_SR 0x40 /* Status Register */ #define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */ -#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */ +#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */ #define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */ #define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */ #define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */ #define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */ #define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */ #define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */ +#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */ +#define At91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B [AT91RM9200 only] */ #define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */ #define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */ -#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */ +#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */ #define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ -#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ +#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ #define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ #define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */ #define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ diff --git a/include/asm-avr32/arch-at32ap/at91rm9200_pdc.h b/include/asm-arm/arch-at91rm9200/at91_pdc.h index ce1150d4438..79d6e02fa45 100644 --- a/include/asm-avr32/arch-at32ap/at91rm9200_pdc.h +++ b/include/asm-arm/arch-at91rm9200/at91_pdc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h + * include/asm-arm/arch-at91rm9200/at91_pdc.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People @@ -13,8 +13,8 @@ * (at your option) any later version. */ -#ifndef AT91RM9200_PDC_H -#define AT91RM9200_PDC_H +#ifndef AT91_PDC_H +#define AT91_PDC_H #define AT91_PDC_RPR 0x100 /* Receive Pointer Register */ #define AT91_PDC_RCR 0x104 /* Receive Counter Register */ diff --git a/include/asm-arm/arch-at91rm9200/at91_pio.h b/include/asm-arm/arch-at91rm9200/at91_pio.h new file mode 100644 index 00000000000..680eaa1f591 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_pio.h @@ -0,0 +1,49 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_pio.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Parallel I/O Controller (PIO) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PIO_H +#define AT91_PIO_H + +#define PIO_PER 0x00 /* Enable Register */ +#define PIO_PDR 0x04 /* Disable Register */ +#define PIO_PSR 0x08 /* Status Register */ +#define PIO_OER 0x10 /* Output Enable Register */ +#define PIO_ODR 0x14 /* Output Disable Register */ +#define PIO_OSR 0x18 /* Output Status Register */ +#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ +#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ +#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ +#define PIO_SODR 0x30 /* Set Output Data Register */ +#define PIO_CODR 0x34 /* Clear Output Data Register */ +#define PIO_ODSR 0x38 /* Output Data Status Register */ +#define PIO_PDSR 0x3c /* Pin Data Status Register */ +#define PIO_IER 0x40 /* Interrupt Enable Register */ +#define PIO_IDR 0x44 /* Interrupt Disable Register */ +#define PIO_IMR 0x48 /* Interrupt Mask Register */ +#define PIO_ISR 0x4c /* Interrupt Status Register */ +#define PIO_MDER 0x50 /* Multi-driver Enable Register */ +#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ +#define PIO_MDSR 0x58 /* Multi-driver Status Register */ +#define PIO_PUDR 0x60 /* Pull-up Disable Register */ +#define PIO_PUER 0x64 /* Pull-up Enable Register */ +#define PIO_PUSR 0x68 /* Pull-up Status Register */ +#define PIO_ASR 0x70 /* Peripheral A Select Register */ +#define PIO_BSR 0x74 /* Peripheral B Select Register */ +#define PIO_ABSR 0x78 /* AB Status Register */ +#define PIO_OWER 0xa0 /* Output Write Enable Register */ +#define PIO_OWDR 0xa4 /* Output Write Disable Register */ +#define PIO_OWSR 0xa8 /* Output Write Status Register */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91_pit.h b/include/asm-arm/arch-at91rm9200/at91_pit.h new file mode 100644 index 00000000000..4a30d009c58 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_pit.h @@ -0,0 +1,29 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_pit.h + * + * Periodic Interval Timer (PIT) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PIT_H +#define AT91_PIT_H + +#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */ +#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ +#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ +#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ + +#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */ +#define AT91_PIT_PITS (1 << 0) /* Timer Status */ + +#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */ +#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */ +#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ +#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91rm9200/at91_pmc.h new file mode 100644 index 00000000000..de8c3da74a0 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_pmc.h @@ -0,0 +1,92 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_pmc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Power Management Controller (PMC) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PMC_H +#define AT91_PMC_H + +#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ +#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ + +#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ +#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ +#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ +#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ +#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ +#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ +#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ +#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ +#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ + +#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ +#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ +#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ + +#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */ +#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ +#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ + +#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ +#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ +#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ + +#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ +#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ +#define AT91_PMC_DIV (0xff << 0) /* Divider */ +#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ +#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ +#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ + +#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ +#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ +#define AT91_PMC_CSS_SLOW (0 << 0) +#define AT91_PMC_CSS_MAIN (1 << 0) +#define AT91_PMC_CSS_PLLA (2 << 0) +#define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ +#define AT91_PMC_PRES_1 (0 << 2) +#define AT91_PMC_PRES_2 (1 << 2) +#define AT91_PMC_PRES_4 (2 << 2) +#define AT91_PMC_PRES_8 (3 << 2) +#define AT91_PMC_PRES_16 (4 << 2) +#define AT91_PMC_PRES_32 (5 << 2) +#define AT91_PMC_PRES_64 (6 << 2) +#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ +#define AT91_PMC_MDIV_1 (0 << 8) +#define AT91_PMC_MDIV_2 (1 << 8) +#define AT91_PMC_MDIV_3 (2 << 8) +#define AT91_PMC_MDIV_4 (3 << 8) + +#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ + +#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ +#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ +#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ +#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ +#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ +#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ +#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ +#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91rm9200/at91_rstc.h new file mode 100644 index 00000000000..ccdc52da973 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_rstc.h @@ -0,0 +1,39 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_rstc.h + * + * Reset Controller (RSTC) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_RSTC_H +#define AT91_RSTC_H + +#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ +#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ +#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ +#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ +#define AT01_RSTC_KEY (0xff << 24) /* KEY Password */ + +#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ +#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ +#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ +#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) +#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) +#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) +#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) +#define AT91_RSTC_RSTTYP_USER (4 << 8) +#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ +#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ + +#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ +#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ +#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ +#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ +#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91rm9200/at91_rtc.h new file mode 100644 index 00000000000..6e5065d5626 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_rtc.h @@ -0,0 +1,75 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_rtc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Real Time Clock (RTC) - System peripheral registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_RTC_H +#define AT91_RTC_H + +#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */ +#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ +#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ +#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ +#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) +#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) +#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) +#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) +#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ +#define AT91_RTC_CALEVSEL_WEEK (0 << 16) +#define AT91_RTC_CALEVSEL_MONTH (1 << 16) +#define AT91_RTC_CALEVSEL_YEAR (2 << 16) + +#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */ +#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ + +#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */ +#define AT91_RTC_SEC (0x7f << 0) /* Current Second */ +#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ +#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ +#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ + +#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ +#define AT91_RTC_CENT (0x7f << 0) /* Current Century */ +#define AT91_RTC_YEAR (0xff << 8) /* Current Year */ +#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ +#define AT91_RTC_DAY (7 << 21) /* Current Day */ +#define AT91_RTC_DATE (0x3f << 24) /* Current Date */ + +#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */ +#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ +#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ +#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ + +#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */ +#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ +#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ + +#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */ +#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ +#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ +#define AT91_RTC_SECEV (1 << 2) /* Second Event */ +#define AT91_RTC_TIMEV (1 << 3) /* Time Event */ +#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ + +#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */ +#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */ +#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */ +#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */ + +#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */ +#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ +#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ +#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ +#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91_rtt.h b/include/asm-arm/arch-at91rm9200/at91_rtt.h new file mode 100644 index 00000000000..c6751ba3ccc --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_rtt.h @@ -0,0 +1,32 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_rtt.h + * + * Real-time Timer (RTT) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_RTT_H +#define AT91_RTT_H + +#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */ +#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ +#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ +#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ +#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ + +#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */ +#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ + +#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */ +#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ + +#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */ +#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ +#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91_shdwc.h b/include/asm-arm/arch-at91rm9200/at91_shdwc.h new file mode 100644 index 00000000000..0439250553c --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_shdwc.h @@ -0,0 +1,33 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_shdwc.h + * + * Shutdown Controller (SHDWC) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_SHDWC_H +#define AT91_SHDWC_H + +#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */ +#define AT91_SHDW_SHDW (1 << 0) /* Processor Reset */ +#define AT91_SHDW_KEY (0xff << 24) /* KEY Password */ + +#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */ +#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */ +#define AT91_SHDW_WKMODE0_NONE 0 +#define AT91_SHDW_WKMODE0_HIGH 1 +#define AT91_SHDW_WKMODE0_LOW 2 +#define AT91_SHDW_WKMODE0_ANYLEVEL 3 +#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */ +#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ + +#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */ +#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ +#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h b/include/asm-arm/arch-at91rm9200/at91_spi.h index bff5ea45f60..bec48ca89bb 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h +++ b/include/asm-arm/arch-at91rm9200/at91_spi.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200_spi.h + * include/asm-arm/arch-at91rm9200/at91_spi.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People @@ -13,8 +13,8 @@ * (at your option) any later version. */ -#ifndef AT91RM9200_SPI_H -#define AT91RM9200_SPI_H +#ifndef AT91_SPI_H +#define AT91_SPI_H #define AT91_SPI_CR 0x00 /* Control Register */ #define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ @@ -28,7 +28,7 @@ #define AT91_SPI_PS_FIXED (0 << 1) #define AT91_SPI_PS_VARIABLE (1 << 1) #define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ -#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection */ +#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ #define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ #define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ #define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h b/include/asm-arm/arch-at91rm9200/at91_ssc.h index ac880227147..694bcaa8f7c 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h +++ b/include/asm-arm/arch-at91rm9200/at91_ssc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h + * include/asm-arm/arch-at91rm9200/at91_ssc.h * * Copyright (C) SAN People * @@ -12,8 +12,8 @@ * (at your option) any later version. */ -#ifndef AT91RM9200_SSC_H -#define AT91RM9200_SSC_H +#ifndef AT91_SSC_H +#define AT91_SSC_H #define AT91_SSC_CR 0x00 /* Control Register */ #define AT91_SSC_RXEN (1 << 0) /* Receive Enable */ @@ -36,6 +36,10 @@ #define AT91_SSC_CKI (1 << 5) /* Clock Inversion */ #define AT91_SSC_CKI_FALLING (0 << 5) #define AT91_SSC_CK_RISING (1 << 5) +#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */ +#define AT91_SSC_CKG_NONE (0 << 6) +#define AT91_SSC_CKG_RFLOW (1 << 6) +#define AT91_SSC_CKG_RFHIGH (2 << 6) #define AT91_SSC_START (0xf << 8) /* Start Selection */ #define AT91_SSC_START_CONTINUOUS (0 << 8) #define AT91_SSC_START_TX_RX (1 << 8) @@ -45,6 +49,7 @@ #define AT91_SSC_START_RISING_RF (5 << 8) #define AT91_SSC_START_LEVEL_RF (6 << 8) #define AT91_SSC_START_EDGE_RF (7 << 8) +#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */ #define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */ #define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */ @@ -75,6 +80,9 @@ #define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */ #define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */ +#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */ +#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */ + #define AT91_SSC_SR 0x40 /* Status Register */ #define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */ #define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */ @@ -84,6 +92,8 @@ #define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */ #define AT91_SSC_ENDRX (1 << 6) /* End of Reception */ #define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */ +#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */ +#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */ #define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */ #define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */ #define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */ diff --git a/include/asm-arm/arch-at91rm9200/at91_st.h b/include/asm-arm/arch-at91rm9200/at91_st.h new file mode 100644 index 00000000000..2432ddfc6c4 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_st.h @@ -0,0 +1,49 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_st.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * System Timer (ST) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_ST_H +#define AT91_ST_H + +#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */ +#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ + +#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */ +#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ + +#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */ +#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ +#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ +#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ + +#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */ +#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ + +#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */ +#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ +#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ +#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ +#define AT91_ST_ALMS (1 << 3) /* Alarm Status */ + +#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */ +#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */ +#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */ + +#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */ +#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ + +#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */ +#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h b/include/asm-arm/arch-at91rm9200/at91_tc.h index f4da752bb0c..8d06eb078e1 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h +++ b/include/asm-arm/arch-at91rm9200/at91_tc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200_tc.h + * include/asm-arm/arch-at91rm9200/at91_tc.h * * Copyright (C) SAN People * @@ -12,8 +12,8 @@ * (at your option) any later version. */ -#ifndef AT91RM9200_TC_H -#define AT91RM9200_TC_H +#ifndef AT91_TC_H +#define AT91_TC_H #define AT91_TC_BCR 0xc0 /* TC Block Control Register */ #define AT91_TC_SYNC (1 << 0) /* Synchro Command */ diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h b/include/asm-arm/arch-at91rm9200/at91_twi.h index 93547d7482b..cda914f1e74 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h +++ b/include/asm-arm/arch-at91rm9200/at91_twi.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200_twi.h + * include/asm-arm/arch-at91rm9200/at91_twi.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People @@ -13,8 +13,8 @@ * (at your option) any later version. */ -#ifndef AT91RM9200_TWI_H -#define AT91RM9200_TWI_H +#ifndef AT91_TWI_H +#define AT91_TWI_H #define AT91_TWI_CR 0x00 /* Control Register */ #define AT91_TWI_START (1 << 0) /* Send a Start Condition */ @@ -43,8 +43,8 @@ #define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ #define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ #define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ -#define AT91_TWI_OVRE (1 << 6) /* Overrun Error */ -#define AT91_TWI_UNRE (1 << 7) /* Underrun Error */ +#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */ +#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */ #define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ #define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ diff --git a/include/asm-arm/arch-at91rm9200/at91_wdt.h b/include/asm-arm/arch-at91rm9200/at91_wdt.h new file mode 100644 index 00000000000..ac63e775772 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91_wdt.h @@ -0,0 +1,34 @@ +/* + * include/asm-arm/arch-at91rm9200/at91_wdt.h + * + * Watchdog Timer (WDT) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_WDT_H +#define AT91_WDT_H + +#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */ +#define AT91_WDT_WDRSTT (1 << 0) /* Restart */ +#define AT91_WDT_KEY (0xff << 24) /* KEY Password */ + +#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */ +#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ +#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ +#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ +#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */ +#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */ +#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */ +#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ +#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ + +#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */ +#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */ +#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h index a5a86b1ff88..4d51177efdd 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h @@ -80,6 +80,22 @@ /* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */ +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */ +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */ +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */ +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */ +#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */ +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */ +#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */ +#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */ +#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */ + +#define AT91_MATRIX 0 /* not supported */ + +/* * Internal Memory. */ #define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */ diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h new file mode 100644 index 00000000000..0c0d81480b3 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h @@ -0,0 +1,160 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_mc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_MC_H +#define AT91RM9200_MC_H + +/* Memory Controller */ +#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */ +#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */ + +#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */ +#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */ +#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */ +#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */ +#define AT91_MC_ABTSZ_BYTE (0 << 8) +#define AT91_MC_ABTSZ_HALFWORD (1 << 8) +#define AT91_MC_ABTSZ_WORD (2 << 8) +#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */ +#define AT91_MC_ABTTYP_DATAREAD (0 << 10) +#define AT91_MC_ABTTYP_DATAWRITE (1 << 10) +#define AT91_MC_ABTTYP_FETCH (2 << 10) +#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */ +#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */ +#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */ +#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */ +#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */ +#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */ +#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */ +#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */ + +#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */ + +#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */ +#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */ +#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */ +#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */ +#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */ + +/* External Bus Interface (EBI) registers */ +#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */ +#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */ +#define AT91_EBI_CS0A_SMC (0 << 0) +#define AT91_EBI_CS0A_BFC (1 << 0) +#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_EBI_CS1A_SMC (0 << 1) +#define AT91_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */ +#define AT91_EBI_CS3A_SMC (0 << 3) +#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */ +#define AT91_EBI_CS4A_SMC (0 << 4) +#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4) +#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */ +#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */ + +/* Static Memory Controller (SMC) registers */ +#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */ +#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */ +#define AT91_SMC_NWS_(x) ((x) << 0) +#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */ +#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */ +#define AT91_SMC_TDF_(x) ((x) << 8) +#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */ +#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */ +#define AT91_SMC_DBW_16 (1 << 13) +#define AT91_SMC_DBW_8 (2 << 13) +#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */ +#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */ +#define AT91_SMC_ACSS_STD (0 << 16) +#define AT91_SMC_ACSS_1 (1 << 16) +#define AT91_SMC_ACSS_2 (2 << 16) +#define AT91_SMC_ACSS_3 (3 << 16) +#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */ +#define AT91_SMC_RWSETUP_(x) ((x) << 24) +#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */ +#define AT91_SMC_RWHOLD_(x) ((x) << 28) + +/* SDRAM Controller registers */ +#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */ +#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91_SDRAMC_MODE_NORMAL (0 << 0) +#define AT91_SDRAMC_MODE_NOP (1 << 0) +#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0) +#define AT91_SDRAMC_MODE_LMR (3 << 0) +#define AT91_SDRAMC_MODE_REFRESH (4 << 0) +#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */ +#define AT91_SDRAMC_DBW_32 (0 << 4) +#define AT91_SDRAMC_DBW_16 (1 << 4) + +#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */ +#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ + +#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */ +#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_SDRAMC_NC_8 (0 << 0) +#define AT91_SDRAMC_NC_9 (1 << 0) +#define AT91_SDRAMC_NC_10 (2 << 0) +#define AT91_SDRAMC_NC_11 (3 << 0) +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR_11 (0 << 2) +#define AT91_SDRAMC_NR_12 (1 << 2) +#define AT91_SDRAMC_NR_13 (2 << 2) +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB_2 (0 << 4) +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_CAS_2 (2 << 5) +#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ +#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ +#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ +#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ +#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ +#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ + +#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */ +#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */ +#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */ +#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */ +#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */ +#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */ + +/* Burst Flash Controller register */ +#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */ +#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */ +#define AT91_BFC_BFCOM_DISABLED (0 << 0) +#define AT91_BFC_BFCOM_ASYNC (1 << 0) +#define AT91_BFC_BFCOM_BURST (2 << 0) +#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */ +#define AT91_BFC_BFCC_MCK (1 << 2) +#define AT91_BFC_BFCC_DIV2 (2 << 2) +#define AT91_BFC_BFCC_DIV4 (3 << 2) +#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */ +#define AT91_BFC_PAGES (7 << 8) /* Page Size */ +#define AT91_BFC_PAGES_NO_PAGE (0 << 8) +#define AT91_BFC_PAGES_16 (1 << 8) +#define AT91_BFC_PAGES_32 (2 << 8) +#define AT91_BFC_PAGES_64 (3 << 8) +#define AT91_BFC_PAGES_128 (4 << 8) +#define AT91_BFC_PAGES_256 (5 << 8) +#define AT91_BFC_PAGES_512 (6 << 8) +#define AT91_BFC_PAGES_1024 (7 << 8) +#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */ +#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */ +#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */ +#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */ +#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h deleted file mode 100644 index 73693fea76a..00000000000 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h +++ /dev/null @@ -1,438 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/at91rm9200_sys.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_SYS_H -#define AT91RM9200_SYS_H - -/* - * Advanced Interrupt Controller. - */ -#define AT91_AIC 0x000 - -#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */ -#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ -#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ -#define AT91_AIC_SRCTYPE_LOW (0 << 5) -#define AT91_AIC_SRCTYPE_FALLING (1 << 5) -#define AT91_AIC_SRCTYPE_HIGH (2 << 5) -#define AT91_AIC_SRCTYPE_RISING (3 << 5) - -#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ -#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */ -#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */ -#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */ -#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ - -#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */ -#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */ -#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */ -#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ -#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ - -#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */ -#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */ -#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */ -#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */ -#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */ -#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */ -#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */ -#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ -#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ - - -/* - * Debug Unit. - */ -#define AT91_DBGU 0x200 - -#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */ -#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */ -#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */ -#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ -#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */ -#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */ -#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */ -#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ -#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ -#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ - -#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ -#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ -#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */ -#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */ -#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */ -#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */ -#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */ -#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */ -#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ -#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ - -#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */ -#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */ -#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */ - -/* - * PIO Controllers. - */ -#define AT91_PIOA 0x400 -#define AT91_PIOB 0x600 -#define AT91_PIOC 0x800 -#define AT91_PIOD 0xa00 - -#define PIO_PER 0x00 /* Enable Register */ -#define PIO_PDR 0x04 /* Disable Register */ -#define PIO_PSR 0x08 /* Status Register */ -#define PIO_OER 0x10 /* Output Enable Register */ -#define PIO_ODR 0x14 /* Output Disable Register */ -#define PIO_OSR 0x18 /* Output Status Register */ -#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ -#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ -#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ -#define PIO_SODR 0x30 /* Set Output Data Register */ -#define PIO_CODR 0x34 /* Clear Output Data Register */ -#define PIO_ODSR 0x38 /* Output Data Status Register */ -#define PIO_PDSR 0x3c /* Pin Data Status Register */ -#define PIO_IER 0x40 /* Interrupt Enable Register */ -#define PIO_IDR 0x44 /* Interrupt Disable Register */ -#define PIO_IMR 0x48 /* Interrupt Mask Register */ -#define PIO_ISR 0x4c /* Interrupt Status Register */ -#define PIO_MDER 0x50 /* Multi-driver Enable Register */ -#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ -#define PIO_MDSR 0x58 /* Multi-driver Status Register */ -#define PIO_PUDR 0x60 /* Pull-up Disable Register */ -#define PIO_PUER 0x64 /* Pull-up Enable Register */ -#define PIO_PUSR 0x68 /* Pull-up Status Register */ -#define PIO_ASR 0x70 /* Peripheral A Select Register */ -#define PIO_BSR 0x74 /* Peripheral B Select Register */ -#define PIO_ABSR 0x78 /* AB Status Register */ -#define PIO_OWER 0xa0 /* Output Write Enable Register */ -#define PIO_OWDR 0xa4 /* Output Write Disable Register */ -#define PIO_OWSR 0xa8 /* Output Write Status Register */ - -#define AT91_PIO_P(n) (1 << (n)) - - -/* - * Power Management Controller. - */ -#define AT91_PMC 0xc00 - -#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ -#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ - -#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ -#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ -#define AT91_PMC_UDP (1 << 1) /* USB Devcice Port Clock */ -#define AT91_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend */ -#define AT91_PMC_UHP (1 << 4) /* USB Host Port Clock */ -#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ -#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ -#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ -#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ - -#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ -#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ -#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ - -#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */ -#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ - -#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ -#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ -#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ - -#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ -#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ -#define AT91_PMC_DIV (0xff << 0) /* Divider */ -#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ -#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ -#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ -#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ - -#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ -#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ -#define AT91_PMC_CSS_SLOW (0 << 0) -#define AT91_PMC_CSS_MAIN (1 << 0) -#define AT91_PMC_CSS_PLLA (2 << 0) -#define AT91_PMC_CSS_PLLB (3 << 0) -#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ -#define AT91_PMC_PRES_1 (0 << 2) -#define AT91_PMC_PRES_2 (1 << 2) -#define AT91_PMC_PRES_4 (2 << 2) -#define AT91_PMC_PRES_8 (3 << 2) -#define AT91_PMC_PRES_16 (4 << 2) -#define AT91_PMC_PRES_32 (5 << 2) -#define AT91_PMC_PRES_64 (6 << 2) -#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ -#define AT91_PMC_MDIV_1 (0 << 8) -#define AT91_PMC_MDIV_2 (1 << 8) -#define AT91_PMC_MDIV_3 (2 << 8) -#define AT91_PMC_MDIV_4 (3 << 8) - -#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ - -#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ -#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ -#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ -#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ -#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ -#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ -#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ -#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ -#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ -#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ - - -/* - * System Timer. - */ -#define AT91_ST 0xd00 - -#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */ -#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ -#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */ -#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ -#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */ -#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ -#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ -#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ -#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */ -#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ -#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */ -#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ -#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ -#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ -#define AT91_ST_ALMS (1 << 3) /* Alarm Status */ -#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */ -#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */ -#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */ -#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */ -#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ -#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */ -#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ - - -/* - * Real-time Clock. - */ -#define AT91_RTC 0xe00 - -#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */ -#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ -#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ -#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ -#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) -#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) -#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) -#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) -#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ -#define AT91_RTC_CALEVSEL_WEEK (0 << 16) -#define AT91_RTC_CALEVSEL_MONTH (1 << 16) -#define AT91_RTC_CALEVSEL_YEAR (2 << 16) - -#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */ -#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ - -#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */ -#define AT91_RTC_SEC (0x7f << 0) /* Current Second */ -#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ -#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ -#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ - -#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ -#define AT91_RTC_CENT (0x7f << 0) /* Current Century */ -#define AT91_RTC_YEAR (0xff << 8) /* Current Year */ -#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ -#define AT91_RTC_DAY (7 << 21) /* Current Day */ -#define AT91_RTC_DATE (0x3f << 24) /* Current Date */ - -#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */ -#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ -#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ -#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ - -#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */ -#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ -#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ - -#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */ -#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ -#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ -#define AT91_RTC_SECEV (1 << 2) /* Second Event */ -#define AT91_RTC_TIMEV (1 << 3) /* Time Event */ -#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ - -#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */ -#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */ -#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */ -#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */ - -#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */ -#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ -#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ -#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ -#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */ - - -/* - * Memory Controller. - */ -#define AT91_MC 0xf00 - -#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */ -#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */ - -#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */ -#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */ -#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */ -#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */ -#define AT91_MC_ABTSZ_BYTE (0 << 8) -#define AT91_MC_ABTSZ_HALFWORD (1 << 8) -#define AT91_MC_ABTSZ_WORD (2 << 8) -#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */ -#define AT91_MC_ABTTYP_DATAREAD (0 << 10) -#define AT91_MC_ABTTYP_DATAWRITE (1 << 10) -#define AT91_MC_ABTTYP_FETCH (2 << 10) -#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */ -#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */ -#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */ -#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */ -#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */ -#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */ -#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */ -#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */ - -#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */ - -#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */ -#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */ -#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */ -#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */ -#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */ - -/* External Bus Interface (EBI) registers */ -#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */ -#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */ -#define AT91_EBI_CS0A_SMC (0 << 0) -#define AT91_EBI_CS0A_BFC (1 << 0) -#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_EBI_CS1A_SMC (0 << 1) -#define AT91_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */ -#define AT91_EBI_CS3A_SMC (0 << 3) -#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */ -#define AT91_EBI_CS4A_SMC (0 << 4) -#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4) -#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */ -#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */ - -/* Static Memory Controller (SMC) registers */ -#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */ -#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */ -#define AT91_SMC_NWS_(x) ((x) << 0) -#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */ -#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */ -#define AT91_SMC_TDF_(x) ((x) << 8) -#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */ -#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */ -#define AT91_SMC_DBW_16 (1 << 13) -#define AT91_SMC_DBW_8 (2 << 13) -#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */ -#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */ -#define AT91_SMC_ACSS_STD (0 << 16) -#define AT91_SMC_ACSS_1 (1 << 16) -#define AT91_SMC_ACSS_2 (2 << 16) -#define AT91_SMC_ACSS_3 (3 << 16) -#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */ -#define AT91_SMC_RWSETUP_(x) ((x) << 24) -#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */ -#define AT91_SMC_RWHOLD_(x) ((x) << 28) - -/* SDRAM Controller registers */ -#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */ -#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91_SDRAMC_MODE_NORMAL (0 << 0) -#define AT91_SDRAMC_MODE_NOP (1 << 0) -#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0) -#define AT91_SDRAMC_MODE_LMR (3 << 0) -#define AT91_SDRAMC_MODE_REFRESH (4 << 0) -#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */ -#define AT91_SDRAMC_DBW_32 (0 << 4) -#define AT91_SDRAMC_DBW_16 (1 << 4) - -#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */ -#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ - -#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */ -#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_SDRAMC_NC_8 (0 << 0) -#define AT91_SDRAMC_NC_9 (1 << 0) -#define AT91_SDRAMC_NC_10 (2 << 0) -#define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_SDRAMC_NR_11 (0 << 2) -#define AT91_SDRAMC_NR_12 (1 << 2) -#define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91_SDRAMC_CAS_2 (2 << 5) -#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ -#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ -#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ -#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ -#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ -#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ - -#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */ -#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */ -#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */ - -/* Burst Flash Controller register */ -#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */ -#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */ -#define AT91_BFC_BFCOM_DISABLED (0 << 0) -#define AT91_BFC_BFCOM_ASYNC (1 << 0) -#define AT91_BFC_BFCOM_BURST (2 << 0) -#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */ -#define AT91_BFC_BFCC_MCK (1 << 2) -#define AT91_BFC_BFCC_DIV2 (2 << 2) -#define AT91_BFC_BFCC_DIV4 (3 << 2) -#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */ -#define AT91_BFC_PAGES (7 << 8) /* Page Size */ -#define AT91_BFC_PAGES_NO_PAGE (0 << 8) -#define AT91_BFC_PAGES_16 (1 << 8) -#define AT91_BFC_PAGES_32 (2 << 8) -#define AT91_BFC_PAGES_64 (3 << 8) -#define AT91_BFC_PAGES_128 (4 << 8) -#define AT91_BFC_PAGES_256 (5 << 8) -#define AT91_BFC_PAGES_512 (6 << 8) -#define AT91_BFC_PAGES_1024 (7 << 8) -#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */ -#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */ -#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */ -#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */ -#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */ - -#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h deleted file mode 100644 index 951e3f61cef..00000000000 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/at91rm9200_udp.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * USB Device Port (UDP) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_UDP_H -#define AT91RM9200_UDP_H - -#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */ -#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */ -#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */ -#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */ - -#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */ -#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */ -#define AT91_UDP_CONFG (1 << 1) /* Configured */ -#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */ -#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */ -#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */ - -#define AT91_UDP_FADDR 0x08 /* Function Address Register */ -#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */ -#define AT91_UDP_FEN (1 << 8) /* Function Enable */ - -#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */ -#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */ -#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */ - -#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */ -#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */ -#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */ -#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ -#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */ -#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ -#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */ -#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */ - -#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */ -#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */ - -#define AT91_UDP_CSR(n) (0x30 + ((n) * 4)) /* Endpoint Control/Status Registers 0-7 */ -#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */ -#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */ -#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */ -#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */ -#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */ -#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */ -#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */ -#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */ -#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */ -#define AT91_UDP_EPTYPE_CTRL (0 << 8) -#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8) -#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8) -#define AT91_UDP_EPTYPE_INT_OUT (3 << 8) -#define AT91_UDP_EPTYPE_ISO_IN (5 << 8) -#define AT91_UDP_EPTYPE_BULK_IN (6 << 8) -#define AT91_UDP_EPTYPE_INT_IN (7 << 8) -#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */ -#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */ -#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */ - -#define AT91_UDP_FDR(n) (0x50 + ((n) * 4)) /* Endpoint FIFO Data Registers 0-7 */ - -#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */ -#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */ - -#endif diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260.h b/include/asm-arm/arch-at91rm9200/at91sam9260.h new file mode 100644 index 00000000000..46f4dd65c03 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91sam9260.h @@ -0,0 +1,125 @@ +/* + * include/asm-arm/arch-at91rm9200/at91sam9260.h + * + * (C) 2006 Andrew Victor + * + * Common definitions. + * Based on AT91SAM9260 datasheet revision A (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9260_H +#define AT91SAM9260_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */ +#define AT91SAM9260_ID_US0 6 /* USART 0 */ +#define AT91SAM9260_ID_US1 7 /* USART 1 */ +#define AT91SAM9260_ID_US2 8 /* USART 2 */ +#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */ +#define AT91SAM9260_ID_UDP 10 /* USB Device Port */ +#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */ +#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */ +#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */ +#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */ +#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */ +#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */ +#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */ +#define AT91SAM9260_ID_UHP 20 /* USB Host port */ +#define AT91SAM9260_ID_EMAC 21 /* Ethernet */ +#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */ +#define AT91SAM9260_ID_US3 23 /* USART 3 */ +#define AT91SAM9260_ID_US4 24 /* USART 4 */ +#define AT91SAM9260_ID_US5 25 /* USART 5 */ +#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */ +#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */ +#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */ +#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ + + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9260_BASE_TCB0 0xfffa0000 +#define AT91SAM9260_BASE_TC0 0xfffa0000 +#define AT91SAM9260_BASE_TC1 0xfffa0040 +#define AT91SAM9260_BASE_TC2 0xfffa0080 +#define AT91SAM9260_BASE_UDP 0xfffa4000 +#define AT91SAM9260_BASE_MCI 0xfffa8000 +#define AT91SAM9260_BASE_TWI 0xfffac000 +#define AT91SAM9260_BASE_US0 0xfffb0000 +#define AT91SAM9260_BASE_US1 0xfffb4000 +#define AT91SAM9260_BASE_US2 0xfffb8000 +#define AT91SAM9260_BASE_SSC 0xfffbc000 +#define AT91SAM9260_BASE_ISI 0xfffc0000 +#define AT91SAM9260_BASE_EMAC 0xfffc4000 +#define AT91SAM9260_BASE_SPI0 0xfffc8000 +#define AT91SAM9260_BASE_SPI1 0xfffcc000 +#define AT91SAM9260_BASE_US3 0xfffd0000 +#define AT91SAM9260_BASE_US4 0xfffd4000 +#define AT91SAM9260_BASE_US5 0xfffd8000 +#define AT91SAM9260_BASE_TCB1 0xfffdc000 +#define AT91SAM9260_BASE_TC3 0xfffdc000 +#define AT91SAM9260_BASE_TC4 0xfffdc040 +#define AT91SAM9260_BASE_TC5 0xfffdc080 +#define AT91SAM9260_BASE_ADC 0xfffe0000 +#define AT91_BASE_SYS 0xffffe800 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) +#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + + +/* + * Internal Memory. + */ +#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ + +#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ +#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */ +#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ +#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */ + +#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ + +#if 0 +/* + * PIO pin definitions (peripheral A/B multiplexing). + */ + +// TODO: Add + +#endif + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h new file mode 100644 index 00000000000..746d973705b --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h @@ -0,0 +1,78 @@ +/* + * include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9260 datasheet revision B. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9260_MATRIX_H +#define AT91SAM9260_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x04) /* Master Configuration Register 5 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_CS3A_SMC (0 << 3) +#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_CS4A_SMC (0 << 4) +#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A_SMC (0 << 5) +#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261.h b/include/asm-arm/arch-at91rm9200/at91sam9261.h new file mode 100644 index 00000000000..8d39672d5b8 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91sam9261.h @@ -0,0 +1,292 @@ +/* + * include/asm-arm/arch-at91rm9200/at91sam9261.h + * + * Copyright (C) SAN People + * + * Common definitions. + * Based on AT91SAM9261 datasheet revision E. (Preliminary) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9261_H +#define AT91SAM9261_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91SAM9261_ID_US0 6 /* USART 0 */ +#define AT91SAM9261_ID_US1 7 /* USART 1 */ +#define AT91SAM9261_ID_US2 8 /* USART 2 */ +#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */ +#define AT91SAM9261_ID_UDP 10 /* USB Device Port */ +#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */ +#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */ +#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */ +#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */ +#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */ +#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */ +#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */ +#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */ +#define AT91SAM9261_ID_UHP 20 /* USB Host port */ +#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */ +#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ + + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9261_BASE_TCB0 0xfffa0000 +#define AT91SAM9261_BASE_TC0 0xfffa0000 +#define AT91SAM9261_BASE_TC1 0xfffa0040 +#define AT91SAM9261_BASE_TC2 0xfffa0080 +#define AT91SAM9261_BASE_UDP 0xfffa4000 +#define AT91SAM9261_BASE_MCI 0xfffa8000 +#define AT91SAM9261_BASE_TWI 0xfffac000 +#define AT91SAM9261_BASE_US0 0xfffb0000 +#define AT91SAM9261_BASE_US1 0xfffb4000 +#define AT91SAM9261_BASE_US2 0xfffb8000 +#define AT91SAM9261_BASE_SSC0 0xfffbc000 +#define AT91SAM9261_BASE_SSC1 0xfffc0000 +#define AT91SAM9261_BASE_SSC2 0xfffc4000 +#define AT91SAM9261_BASE_SPI0 0xfffc8000 +#define AT91SAM9261_BASE_SPI1 0xfffcc000 +#define AT91_BASE_SYS 0xffffea00 + + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + + +/* + * Internal Memory. + */ +#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */ + +#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ + +#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */ +#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */ + + +#if 0 +/* + * PIO pin definitions (peripheral A/B multiplexing). + */ +#define AT91_PA0_SPI0_MISO (1 << 0) /* A: SPI0 Master In Slave */ +#define AT91_PA0_MCDA0 (1 << 0) /* B: Multimedia Card A Data 0 */ +#define AT91_PA1_SPI0_MOSI (1 << 1) /* A: SPI0 Master Out Slave */ +#define AT91_PA1_MCCDA (1 << 1) /* B: Multimedia Card A Command */ +#define AT91_PA2_SPI0_SPCK (1 << 2) /* A: SPI0 Serial Clock */ +#define AT91_PA2_MCCK (1 << 2) /* B: Multimedia Card Clock */ +#define AT91_PA3_SPI0_NPCS0 (1 << 3) /* A: SPI0 Peripheral Chip Select 0 */ +#define AT91_PA4_SPI0_NPCS1 (1 << 4) /* A: SPI0 Peripheral Chip Select 1 */ +#define AT91_PA4_MCDA1 (1 << 4) /* B: Multimedia Card A Data 1 */ +#define AT91_PA5_SPI0_NPCS2 (1 << 5) /* A: SPI0 Peripheral Chip Select 2 */ +#define AT91_PA5_MCDA2 (1 << 5) /* B: Multimedia Card A Data 2 */ +#define AT91_PA6_SPI0_NPCS3 (1 << 6) /* A: SPI0 Peripheral Chip Select 3 */ +#define AT91_PA6_MCDA3 (1 << 6) /* B: Multimedia Card A Data 3 */ +#define AT91_PA7_TWD (1 << 7) /* A: TWI Two-wire Serial Data */ +#define AT91_PA7_PCK0 (1 << 7) /* B: PMC Programmable clock Output 0 */ +#define AT91_PA8_TWCK (1 << 8) /* A: TWI Two-wire Serial Clock */ +#define AT91_PA8_PCK1 (1 << 8) /* B: PMC Programmable clock Output 1 */ +#define AT91_PA9_DRXD (1 << 9) /* A: DBGU Debug Receive Data */ +#define AT91_PA9_PCK2 (1 << 9) /* B: PMC Programmable clock Output 2 */ +#define AT91_PA10_DTXD (1 << 10) /* A: DBGU Debug Transmit Data */ +#define AT91_PA10_PCK3 (1 << 10) /* B: PMC Programmable clock Output 3 */ +#define AT91_PA11_TSYNC (1 << 11) /* A: Trace Synchronization Signal */ +#define AT91_PA11_SCK1 (1 << 11) /* B: USART1 Serial Clock */ +#define AT91_PA12_TCLK (1 << 12) /* A: Trace Clock */ +#define AT91_PA12_RTS1 (1 << 12) /* B: USART1 Ready To Send */ +#define AT91_PA13_TPS0 (1 << 13) /* A: Trace ARM Pipeline Status 0 */ +#define AT91_PA13_CTS1 (1 << 13) /* B: USART1 Clear To Send */ +#define AT91_PA14_TPS1 (1 << 14) /* A: Trace ARM Pipeline Status 1 */ +#define AT91_PA14_SCK2 (1 << 14) /* B: USART2 Serial Clock */ +#define AT91_PA15_TPS2 (1 << 15) /* A: Trace ARM Pipeline Status 2 */ +#define AT91_PA15_RTS2 (1 << 15) /* B: USART2 Ready To Send */ +#define AT91_PA16_TPK0 (1 << 16) /* A: Trace Packet Port 0 */ +#define AT91_PA16_CTS2 (1 << 16) /* B: USART2 Clear To Send */ +#define AT91_PA17_TPK1 (1 << 17) /* A: Trace Packet Port 1 */ +#define AT91_PA17_TF1 (1 << 17) /* B: SSC1 Transmit Frame Sync */ +#define AT91_PA18_TPK2 (1 << 18) /* A: Trace Packet Port 2 */ +#define AT91_PA18_TK1 (1 << 18) /* B: SSC1 Transmit Clock */ +#define AT91_PA19_TPK3 (1 << 19) /* A: Trace Packet Port 3 */ +#define AT91_PA19_TD1 (1 << 19) /* B: SSC1 Transmit Data */ +#define AT91_PA20_TPK4 (1 << 20) /* A: Trace Packet Port 4 */ +#define AT91_PA20_RD1 (1 << 20) /* B: SSC1 Receive Data */ +#define AT91_PA21_TPK5 (1 << 21) /* A: Trace Packet Port 5 */ +#define AT91_PA21_RK1 (1 << 21) /* B: SSC1 Receive Clock */ +#define AT91_PA22_TPK6 (1 << 22) /* A: Trace Packet Port 6 */ +#define AT91_PA22_RF1 (1 << 22) /* B: SSC1 Receive Frame Sync */ +#define AT91_PA23_TPK7 (1 << 23) /* A: Trace Packet Port 7 */ +#define AT91_PA23_RTS0 (1 << 23) /* B: USART0 Ready To Send */ +#define AT91_PA24_TPK8 (1 << 24) /* A: Trace Packet Port 8 */ +#define AT91_PA24_SPI1_NPCS1 (1 << 24) /* B: SPI1 Peripheral Chip Select 1 */ +#define AT91_PA25_TPK9 (1 << 25) /* A: Trace Packet Port 9 */ +#define AT91_PA25_SPI1_NPCS2 (1 << 25) /* B: SPI1 Peripheral Chip Select 2 */ +#define AT91_PA26_TPK10 (1 << 26) /* A: Trace Packet Port 10 */ +#define AT91_PA26_SPI1_NPCS3 (1 << 26) /* B: SPI1 Peripheral Chip Select 3 */ +#define AT91_PA27_TPK11 (1 << 27) /* A: Trace Packet Port 11 */ +#define AT91_PA27_SPI0_NPCS1 (1 << 27) /* B: SPI0 Peripheral Chip Select 1 */ +#define AT91_PA28_TPK12 (1 << 28) /* A: Trace Packet Port 12 */ +#define AT91_PA28_SPI0_NPCS2 (1 << 28) /* B: SPI0 Peripheral Chip Select 2 */ +#define AT91_PA29_TPK13 (1 << 29) /* A: Trace Packet Port 13 */ +#define AT91_PA29_SPI0_NPCS3 (1 << 29) /* B: SPI0 Peripheral Chip Select 3 */ +#define AT91_PA30_TPK14 (1 << 30) /* A: Trace Packet Port 14 */ +#define AT91_PA30_A23 (1 << 30) /* B: Address Bus bit 23 */ +#define AT91_PA31_TPK15 (1 << 31) /* A: Trace Packet Port 15 */ +#define AT91_PA31_A24 (1 << 31) /* B: Address Bus bit 24 */ + +#define AT91_PB0_LCDVSYNC (1 << 0) /* A: LCD Vertical Synchronization */ +#define AT91_PB1_LCDHSYNC (1 << 1) /* A: LCD Horizontal Synchronization */ +#define AT91_PB2_LCDDOTCK (1 << 2) /* A: LCD Dot Clock */ +#define AT91_PB2_PCK0 (1 << 2) /* B: PMC Programmable clock Output 0 */ +#define AT91_PB3_LCDDEN (1 << 3) /* A: LCD Data Enable */ +#define AT91_PB4_LCDCC (1 << 4) /* A: LCD Contrast Control */ +#define AT91_PB4_LCDD2 (1 << 4) /* B: LCD Data Bus Bit 2 */ +#define AT91_PB5_LCDD0 (1 << 5) /* A: LCD Data Bus Bit 0 */ +#define AT91_PB5_LCDD3 (1 << 5) /* B: LCD Data Bus Bit 3 */ +#define AT91_PB6_LCDD1 (1 << 6) /* A: LCD Data Bus Bit 1 */ +#define AT91_PB6_LCDD4 (1 << 6) /* B: LCD Data Bus Bit 4 */ +#define AT91_PB7_LCDD2 (1 << 7) /* A: LCD Data Bus Bit 2 */ +#define AT91_PB7_LCDD5 (1 << 7) /* B: LCD Data Bus Bit 5 */ +#define AT91_PB8_LCDD3 (1 << 8) /* A: LCD Data Bus Bit 3 */ +#define AT91_PB8_LCDD6 (1 << 8) /* B: LCD Data Bus Bit 6 */ +#define AT91_PB9_LCDD4 (1 << 9) /* A: LCD Data Bus Bit 4 */ +#define AT91_PB9_LCDD7 (1 << 9) /* B: LCD Data Bus Bit 7 */ +#define AT91_PB10_LCDD5 (1 << 10) /* A: LCD Data Bus Bit 5 */ +#define AT91_PB10_LCDD10 (1 << 10) /* B: LCD Data Bus Bit 10 */ +#define AT91_PB11_LCDD6 (1 << 11) /* A: LCD Data Bus Bit 6 */ +#define AT91_PB11_LCDD11 (1 << 11) /* B: LCD Data Bus Bit 11 */ +#define AT91_PB12_LCDD7 (1 << 12) /* A: LCD Data Bus Bit 7 */ +#define AT91_PB12_LCDD12 (1 << 12) /* B: LCD Data Bus Bit 12 */ +#define AT91_PB13_LCDD8 (1 << 13) /* A: LCD Data Bus Bit 8 */ +#define AT91_PB13_LCDD13 (1 << 13) /* B: LCD Data Bus Bit 13 */ +#define AT91_PB14_LCDD9 (1 << 14) /* A: LCD Data Bus Bit 9 */ +#define AT91_PB14_LCDD14 (1 << 14) /* B: LCD Data Bus Bit 14 */ +#define AT91_PB15_LCDD10 (1 << 15) /* A: LCD Data Bus Bit 10 */ +#define AT91_PB15_LCDD15 (1 << 15) /* B: LCD Data Bus Bit 15 */ +#define AT91_PB16_LCDD11 (1 << 16) /* A: LCD Data Bus Bit 11 */ +#define AT91_PB16_LCDD19 (1 << 16) /* B: LCD Data Bus Bit 19 */ +#define AT91_PB17_LCDD12 (1 << 17) /* A: LCD Data Bus Bit 12 */ +#define AT91_PB17_LCDD20 (1 << 17) /* B: LCD Data Bus Bit 20 */ +#define AT91_PB18_LCDD13 (1 << 18) /* A: LCD Data Bus Bit 13 */ +#define AT91_PB18_LCDD21 (1 << 18) /* B: LCD Data Bus Bit 21 */ +#define AT91_PB19_LCDD14 (1 << 19) /* A: LCD Data Bus Bit 14 */ +#define AT91_PB19_LCDD22 (1 << 19) /* B: LCD Data Bus Bit 22 */ +#define AT91_PB20_LCDD15 (1 << 20) /* A: LCD Data Bus Bit 15 */ +#define AT91_PB20_LCDD23 (1 << 20) /* B: LCD Data Bus Bit 23 */ +#define AT91_PB21_TF0 (1 << 21) /* A: SSC0 Transmit Frame Sync */ +#define AT91_PB21_LCDD16 (1 << 21) /* B: LCD Data Bus Bit 16 */ +#define AT91_PB22_TK0 (1 << 22) /* A: SSC0 Transmit Clock */ +#define AT91_PB22_LCDD17 (1 << 22) /* B: LCD Data Bus Bit 17 */ +#define AT91_PB23_TD0 (1 << 23) /* A: SSC0 Transmit Data */ +#define AT91_PB23_LCDD18 (1 << 23) /* B: LCD Data Bus Bit 18 */ +#define AT91_PB24_RD0 (1 << 24) /* A: SSC0 Receive Data */ +#define AT91_PB24_LCDD19 (1 << 24) /* B: LCD Data Bus Bit 19 */ +#define AT91_PB25_RK0 (1 << 25) /* A: SSC0 Receive Clock */ +#define AT91_PB25_LCDD20 (1 << 25) /* B: LCD Data Bus Bit 20 */ +#define AT91_PB26_RF0 (1 << 26) /* A: SSC0 Receive Frame Sync */ +#define AT91_PB26_LCDD21 (1 << 26) /* B: LCD Data Bus Bit 21 */ +#define AT91_PB27_SPI1_NPCS1 (1 << 27) /* A: SPI1 Peripheral Chip Select 1 */ +#define AT91_PB27_LCDD22 (1 << 27) /* B: LCD Data Bus Bit 22 */ +#define AT91_PB28_SPI1_NPCS0 (1 << 28) /* A: SPI1 Peripheral Chip Select 0 */ +#define AT91_PB28_LCDD23 (1 << 28) /* B: LCD Data Bus Bit 23 */ +#define AT91_PB29_SPI1_SPCK (1 << 29) /* A: SPI1 Serial Clock */ +#define AT91_PB29_IRQ2 (1 << 29) /* B: Interrupt input 2 */ +#define AT91_PB30_SPI1_MISO (1 << 30) /* A: SPI1 Master In Slave */ +#define AT91_PB30_IRQ1 (1 << 30) /* B: Interrupt input 1 */ +#define AT91_PB31_SPI1_MOSI (1 << 31) /* A: SPI1 Master Out Slave */ +#define AT91_PB31_PCK2 (1 << 31) /* B: PMC Programmable clock Output 2 */ + +#define AT91_PC0_SMOE (1 << 0) /* A: SmartMedia Output Enable */ +#define AT91_PC0_NCS6 (1 << 0) /* B: Chip Select 6 */ +#define AT91_PC1_SMWE (1 << 1) /* A: SmartMedia Write Enable */ +#define AT91_PC1_NCS7 (1 << 1) /* B: Chip Select 7 */ +#define AT91_PC2_NWAIT (1 << 2) /* A: NWAIT */ +#define AT91_PC2_IRQ0 (1 << 2) /* B: Interrupt input 0 */ +#define AT91_PC3_A25_CFRNW (1 << 3) /* A: Address Bus[25] / Compact Flash Read Not Write */ +#define AT91_PC4_NCS4_CFCS0 (1 << 4) /* A: Chip Select 4 / CompactFlash Chip Select 0 */ +#define AT91_PC5_NCS5_CFCS1 (1 << 5) /* A: Chip Select 5 / CompactFlash Chip Select 1 */ +#define AT91_PC6_CFCE1 (1 << 6) /* A: CompactFlash Chip Enable 1 */ +#define AT91_PC7_CFCE2 (1 << 7) /* A: CompactFlash Chip Enable 2 */ +#define AT91_PC8_TXD0 (1 << 8) /* A: USART0 Transmit Data */ +#define AT91_PC8_PCK2 (1 << 8) /* B: PMC Programmable clock Output 2 */ +#define AT91_PC9_RXD0 (1 << 9) /* A: USART0 Receive Data */ +#define AT91_PC9_PCK3 (1 << 9) /* B: PMC Programmable clock Output 3 */ +#define AT91_PC10_RTS0 (1 << 10) /* A: USART0 Ready To Send */ +#define AT91_PC10_SCK0 (1 << 10) /* B: USART0 Serial Clock */ +#define AT91_PC11_CTS0 (1 << 11) /* A: USART0 Clear To Send */ +#define AT91_PC11_FIQ (1 << 11) /* B: AIC Fast Interrupt Input */ +#define AT91_PC12_TXD1 (1 << 12) /* A: USART1 Transmit Data */ +#define AT91_PC12_NCS6 (1 << 12) /* B: Chip Select 6 */ +#define AT91_PC13_RXD1 (1 << 13) /* A: USART1 Receive Data */ +#define AT91_PC13_NCS7 (1 << 13) /* B: Chip Select 7 */ +#define AT91_PC14_TXD2 (1 << 14) /* A: USART2 Transmit Data */ +#define AT91_PC14_SPI1_NPCS2 (1 << 14) /* B: SPI1 Peripheral Chip Select 2 */ +#define AT91_PC15_RXD2 (1 << 15) /* A: USART2 Receive Data */ +#define AT91_PC15_SPI1_NPCS3 (1 << 15) /* B: SPI1 Peripheral Chip Select 3 */ +#define AT91_PC16_D16 (1 << 16) /* A: Data Bus [16] */ +#define AT91_PC16_TCLK0 (1 << 16) /* B: Timer Counter 0 external clock input */ +#define AT91_PC17_D17 (1 << 17) /* A: Data Bus [17] */ +#define AT91_PC17_TCLK1 (1 << 17) /* B: Timer Counter 1 external clock input */ +#define AT91_PC18_D18 (1 << 18) /* A: Data Bus [18] */ +#define AT91_PC18_TCLK2 (1 << 18) /* B: Timer Counter 2 external clock input */ +#define AT91_PC19_D19 (1 << 19) /* A: Data Bus [19] */ +#define AT91_PC19_TIOA0 (1 << 19) /* B: Timer Counter 0 Multipurpose Timer I/O Pin A */ +#define AT91_PC20_D20 (1 << 20) /* A: Data Bus [20] */ +#define AT91_PC20_TIOB0 (1 << 20) /* B: Timer Counter 0 Multipurpose Timer I/O Pin B */ +#define AT91_PC21_D21 (1 << 21) /* A: Data Bus [21] */ +#define AT91_PC21_TIOA1 (1 << 21) /* B: Timer Counter 1 Multipurpose Timer I/O Pin A */ +#define AT91_PC22_D22 (1 << 22) /* A: Data Bus [22] */ +#define AT91_PC22_TIOB1 (1 << 22) /* B: Timer Counter 1 Multipurpose Timer I/O Pin B */ +#define AT91_PC23_D23 (1 << 23) /* A: Data Bus [23] */ +#define AT91_PC23_TIOA2 (1 << 23) /* B: Timer Counter 2 Multipurpose Timer I/O Pin A */ +#define AT91_PC24_D24 (1 << 24) /* A: Data Bus [24] */ +#define AT91_PC24_TIOB2 (1 << 24) /* B: Timer Counter 2 Multipurpose Timer I/O Pin B */ +#define AT91_PC25_D25 (1 << 25) /* A: Data Bus [25] */ +#define AT91_PC25_TF2 (1 << 25) /* B: SSC2 Transmit Frame Sync */ +#define AT91_PC26_D26 (1 << 26) /* A: Data Bus [26] */ +#define AT91_PC26_TK2 (1 << 26) /* B: SSC2 Transmit Clock */ +#define AT91_PC27_D27 (1 << 27) /* A: Data Bus [27] */ +#define AT91_PC27_TD2 (1 << 27) /* B: SSC2 Transmit Data */ +#define AT91_PC28_D28 (1 << 28) /* A: Data Bus [28] */ +#define AT91_PC28_RD2 (1 << 28) /* B: SSC2 Receive Data */ +#define AT91_PC29_D29 (1 << 29) /* A: Data Bus [29] */ +#define AT91_PC29_RK2 (1 << 29) /* B: SSC2 Receive Clock */ +#define AT91_PC30_D30 (1 << 30) /* A: Data Bus [30] */ +#define AT91_PC30_RF2 (1 << 30) /* B: SSC2 Receive Frame Sync */ +#define AT91_PC31_D31 (1 << 31) /* A: Data Bus [31] */ +#define AT91_PC31_PCK1 (1 << 31) /* B: PMC Programmable clock Output 1 */ +#endif + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h new file mode 100644 index 00000000000..270a5dcdf1c --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h @@ -0,0 +1,62 @@ +/* + * include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9261_MATRIX_H +#define AT91SAM9261_MATRIX_H + +#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT01_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ + +#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_16 (5 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_ITCM_64 (7 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_16 (5 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) +#define AT91_MATRIX_DTCM_64 (7 << 4) + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_CS3A_SMC (0 << 3) +#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_CS4A_SMC (0 << 4) +#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A_SMC (0 << 5) +#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ + +#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */ +#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h new file mode 100644 index 00000000000..7d94968b5d5 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h @@ -0,0 +1,134 @@ +/* + * include/asm-arm/arch-at91rm9200/at91sam926x_mc.h + * + * Memory Controllers (SMC, SDRAMC) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM926x_MC_H +#define AT91SAM926x_MC_H + +/* SDRAM Controller (SDRAMC) registers */ +#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ +#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91_SDRAMC_MODE_NORMAL 0 +#define AT91_SDRAMC_MODE_NOP 1 +#define AT91_SDRAMC_MODE_PRECHARGE 2 +#define AT91_SDRAMC_MODE_LMR 3 +#define AT91_SDRAMC_MODE_REFRESH 4 +#define AT91_SDRAMC_MODE_EXT_LMR 5 +#define AT91_SDRAMC_MODE_DEEP 6 + +#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ +#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ +#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_SDRAMC_NC_8 (0 << 0) +#define AT91_SDRAMC_NC_9 (1 << 0) +#define AT91_SDRAMC_NC_10 (2 << 0) +#define AT91_SDRAMC_NC_11 (3 << 0) +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR_11 (0 << 2) +#define AT91_SDRAMC_NR_12 (1 << 2) +#define AT91_SDRAMC_NR_13 (2 << 2) +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB_2 (0 << 4) +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_CAS_1 (1 << 5) +#define AT91_SDRAMC_CAS_2 (2 << 5) +#define AT91_SDRAMC_CAS_3 (3 << 5) +#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ +#define AT91_SDRAMC_DBW_32 (0 << 7) +#define AT91_SDRAMC_DBW_16 (1 << 7) +#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ +#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ +#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ +#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ +#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ +#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ + +#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ +#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_SDRAMC_LPCB_DISABLE 0 +#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 +#define AT91_SDRAMC_LPCB_POWER_DOWN 2 +#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */ +#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) + +#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ +#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ +#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ +#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ +#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ + +#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ +#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ +#define AT91_SDRAMC_MD_SDRAM 0 +#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 + + +/* Static Memory Controller (SMC) registers */ +#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ +#define AT91_SMC_NWESETUP_(x) ((x) << 0) +#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ +#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) +#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ +#define AT91_SMC_NRDSETUP_(x) ((x) << 16) +#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ +#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) + +#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ +#define AT91_SMC_NWEPULSE_(x) ((x) << 0) +#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ +#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) +#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ +#define AT91_SMC_NRDPULSE_(x) ((x) << 16) +#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ +#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) + +#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ +#define AT91_SMC_NWECYCLE_(x) ((x) << 0) +#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ +#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) + +#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ +#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ +#define AT91_SMC_EXNWMODE (3 << 5) /* NWAIT Mode */ +#define AT91_SMC_EXNWMODE_DISABLE (0 << 5) +#define AT91_SMC_EXNWMODE_FROZEN (2 << 5) +#define AT91_SMC_EXNWMODE_READY (3 << 5) +#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ +#define AT91_SMC_BAT_SELECT (0 << 8) +#define AT91_SMC_BAT_WRITE (1 << 8) +#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ +#define AT91_SMC_DBW_8 (0 << 12) +#define AT91_SMC_DBW_16 (1 << 12) +#define AT91_SMC_DBW_32 (2 << 12) +#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ +#define AT91_SMC_TDF_(x) ((x) << 16) +#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ +#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ +#define AT91_SMC_PS (3 << 28) /* Page Size */ +#define AT91_SMC_PS_4 (0 << 28) +#define AT91_SMC_PS_8 (1 << 28) +#define AT91_SMC_PS_16 (2 << 28) +#define AT91_SMC_PS_32 (3 << 28) + +#endif diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h index 3cc9aec80f9..768e0fc6aa2 100644 --- a/include/asm-arm/arch-at91rm9200/board.h +++ b/include/asm-arm/arch-at91rm9200/board.h @@ -48,13 +48,14 @@ struct at91_cf_data { u8 det_pin; /* Card detect */ u8 vcc_pin; /* power switching */ u8 rst_pin; /* card reset */ + u8 chipselect; /* EBI Chip Select number */ }; extern void __init at91_add_device_cf(struct at91_cf_data *data); /* MMC / SD */ struct at91_mmc_data { u8 det_pin; /* card detect IRQ */ - unsigned is_b:1; /* uses B side (vs A) */ + unsigned slot_b:1; /* uses Slot B */ unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ u8 wp_pin; /* (SD) writeprotect detect */ u8 vcc_pin; /* power switching (high == on) */ @@ -81,7 +82,8 @@ struct at91_nand_data { u8 rdy_pin; /* ready/busy */ u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ - struct mtd_partition* (*partition_info)(int, int*); + u8 bus_width_16; /* buswidth is 16 bit */ + struct mtd_partition* (*partition_info)(int, int*); }; extern void __init at91_add_device_nand(struct at91_nand_data *data); diff --git a/include/asm-arm/arch-at91rm9200/cpu.h b/include/asm-arm/arch-at91rm9200/cpu.h new file mode 100644 index 00000000000..6f8d09b0869 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/cpu.h @@ -0,0 +1,49 @@ +/* + * include/asm-arm/arch-at91rm9200/cpu.h + * + * Copyright (C) 2006 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_CPU_H +#define __ASM_ARCH_CPU_H + +#include <asm/hardware.h> +#include <asm/arch/at91_dbgu.h> + + +#define ARCH_ID_AT91RM9200 0x09290780 +#define ARCH_ID_AT91SAM9260 0x019803a0 +#define ARCH_ID_AT91SAM9261 0x019703a0 + + +static inline unsigned long at91_cpu_identify(void) +{ + return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); +} + + +#ifdef CONFIG_ARCH_AT91RM9200 +#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) +#else +#define cpu_is_at91rm9200() (0) +#endif + +#ifdef CONFIG_ARCH_AT91SAM9260 +#define cpu_is_at91sam9260() (at91_cpu_identify() == ARCH_ID_AT91SAM9260) +#else +#define cpu_is_at91sam9260() (0) +#endif + +#ifdef CONFIG_ARCH_AT91SAM9261 +#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261) +#else +#define cpu_is_at91sam9261() (0) +#endif + +#endif diff --git a/include/asm-arm/arch-at91rm9200/debug-macro.S b/include/asm-arm/arch-at91rm9200/debug-macro.S index f496b54c4c3..85cdadf2663 100644 --- a/include/asm-arm/arch-at91rm9200/debug-macro.S +++ b/include/asm-arm/arch-at91rm9200/debug-macro.S @@ -12,6 +12,7 @@ */ #include <asm/hardware.h> +#include <asm/arch/at91_dbgu.h> .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/include/asm-arm/arch-at91rm9200/entry-macro.S b/include/asm-arm/arch-at91rm9200/entry-macro.S index 61a326e9490..57248a79647 100644 --- a/include/asm-arm/arch-at91rm9200/entry-macro.S +++ b/include/asm-arm/arch-at91rm9200/entry-macro.S @@ -11,6 +11,7 @@ */ #include <asm/hardware.h> +#include <asm/arch/at91_aic.h> .macro disable_fiq .endm diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 9ca4cc9c0b2..9ea5bfe0632 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -16,8 +16,16 @@ #include <asm/sizes.h> +#if defined(CONFIG_ARCH_AT91RM9200) #include <asm/arch/at91rm9200.h> -#include <asm/arch/at91rm9200_sys.h> +#elif defined(CONFIG_ARCH_AT91SAM9260) +#include <asm/arch/at91sam9260.h> +#elif defined(CONFIG_ARCH_AT91SAM9261) +#include <asm/arch/at91sam9261.h> +#else +#error "Unsupported AT91 processor" +#endif + /* * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF @@ -34,29 +42,27 @@ * Virtual to Physical Address mapping for IO devices. */ #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91RM9200_BASE_SPI) #define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) -#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91RM9200_BASE_TWI) -#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91RM9200_BASE_MCI) -#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91RM9200_BASE_UDP) /* Internal SRAM is mapped below the IO devices */ -#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE) +#define AT91_SRAM_MAX SZ_1M +#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) /* Serial ports */ -#define ATMEL_MAX_UART 5 /* 4 USART3's and one DBGU port */ - -/* FLASH */ -#define AT91_FLASH_BASE 0x10000000 /* NCS0: Flash physical base address */ +#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */ + +/* External Memory Map */ +#define AT91_CHIPSELECT_0 0x10000000 +#define AT91_CHIPSELECT_1 0x20000000 +#define AT91_CHIPSELECT_2 0x30000000 +#define AT91_CHIPSELECT_3 0x40000000 +#define AT91_CHIPSELECT_4 0x50000000 +#define AT91_CHIPSELECT_5 0x60000000 +#define AT91_CHIPSELECT_6 0x70000000 +#define AT91_CHIPSELECT_7 0x80000000 /* SDRAM */ -#define AT91_SDRAM_BASE 0x20000000 /* NCS1: SDRAM physical base address */ - -/* SmartMedia */ -#define AT91_SMARTMEDIA_BASE 0x40000000 /* NCS3: Smartmedia physical base address */ - -/* Compact Flash */ -#define AT91_CF_BASE 0x50000000 /* NCS4-NCS6: Compact Flash physical base address */ +#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h index 763cb96c418..c0679eaefaf 100644 --- a/include/asm-arm/arch-at91rm9200/irqs.h +++ b/include/asm-arm/arch-at91rm9200/irqs.h @@ -21,6 +21,8 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H +#include <asm/arch/at91_aic.h> + #define NR_AIC_IRQS 32 diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91rm9200/system.h index 8a2ff472e4c..9c67130603b 100644 --- a/include/asm-arm/arch-at91rm9200/system.h +++ b/include/asm-arm/arch-at91rm9200/system.h @@ -22,6 +22,8 @@ #define __ASM_ARCH_SYSTEM_H #include <asm/hardware.h> +#include <asm/arch/at91_st.h> +#include <asm/arch/at91_dbgu.h> static inline void arch_idle(void) { @@ -39,21 +41,13 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) -{ - /* - * Perform a hardware reset with the use of the Watchdog timer. - */ - at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); - at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); -} - -#define ARCH_ID_AT91RM9200 0x09200080 -#define ARCH_ID_AT91SAM9261 0x019000a0 +void (*at91_arch_reset)(void); -static inline unsigned long arch_identify(void) +static inline void arch_reset(char mode) { - return at91_sys_read(AT91_DBGU_CIDR) & (AT91_CIDR_EPROC | AT91_CIDR_ARCH); + /* call the CPU-specific reset function */ + if (at91_arch_reset) + (at91_arch_reset)(); } #endif diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91rm9200/timex.h index 88687cefe6e..faeca45a8d4 100644 --- a/include/asm-arm/arch-at91rm9200/timex.h +++ b/include/asm-arm/arch-at91rm9200/timex.h @@ -23,6 +23,15 @@ #include <asm/hardware.h> +#if defined(CONFIG_ARCH_AT91RM9200) + #define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) +#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261) + +#define AT91SAM9_MASTER_CLOCK 99300000 +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + +#endif + #endif diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h index ec7811ab0a5..34b4b93fa01 100644 --- a/include/asm-arm/arch-at91rm9200/uncompress.h +++ b/include/asm-arm/arch-at91rm9200/uncompress.h @@ -22,11 +22,11 @@ #define __ASM_ARCH_UNCOMPRESS_H #include <asm/hardware.h> +#include <asm/arch/at91_dbgu.h> /* * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in + * initialized by the bootloader. If you didn't setup a port in * your bootloader then nothing will appear (which might be desired). * * This does not append a newline diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91rm9200/vmalloc.h index 4c367eb57f4..0a23b8c562b 100644 --- a/include/asm-arm/arch-at91rm9200/vmalloc.h +++ b/include/asm-arm/arch-at91rm9200/vmalloc.h @@ -21,6 +21,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (AT91_SRAM_VIRT_BASE & PGDIR_MASK) +#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK) #endif diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h index c6e8dcf674d..42768cc8bfb 100644 --- a/include/asm-arm/arch-clps711x/memory.h +++ b/include/asm-arm/arch-clps711x/memory.h @@ -62,7 +62,15 @@ * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM. */ -#ifdef CONFIG_DISCONTIGMEM +/* + * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211 + * uses only one of the two banks (bank #1). However, even within + * bank #1, memory is discontiguous. + * + * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between + * them, so we use 24 for the node max shift to get 16MB node sizes. + */ + /* * Because of the wide memory address space between physical RAM banks on the * SA1100, it's much more convenient to use Linux's NUMA support to implement @@ -80,48 +88,7 @@ * node 2: 0xd0000000 - 0xd7ffffff * node 3: 0xd8000000 - 0xdfffffff */ - -/* - * Given a kernel address, find the home node of the underlying memory. - */ -#define KVADDR_TO_NID(addr) \ - (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MAX_MEM_SHIFT) - -/* - * Given a page frame number, convert it to a node id. - */ -#define PFN_TO_NID(pfn) \ - (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MAX_MEM_SHIFT - PAGE_SHIFT)) - -/* - * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory - * and returns the mem_map of that node. - */ -#define ADDR_TO_MAPBASE(kaddr) \ - NODE_MEM_MAP(KVADDR_TO_NID((unsigned long)(kaddr))) - -#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) - -/* - * Given a kaddr, LOCAL_MAR_NR finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ -#define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & (NODE_MAX_MEM_SIZE - 1)) >> PAGE_SHIFT) - -/* - * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211 - * uses only one of the two banks (bank #1). However, even within - * bank #1, memory is discontiguous. - * - * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between - * them, so we use 24 for the node max shift to get 16MB node sizes. - */ -#define NODE_MAX_MEM_SHIFT 24 -#define NODE_MAX_MEM_SIZE (1<<NODE_MAX_MEM_SHIFT) - -#endif /* CONFIG_DISCONTIGMEM */ +#define NODE_MEM_SIZE_BITS 24 #endif diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h index 8c91674706b..e22ba789546 100644 --- a/include/asm-arm/arch-imx/timex.h +++ b/include/asm-arm/arch-imx/timex.h @@ -21,7 +21,6 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -#include <asm/hardware.h> -#define CLOCK_TICK_RATE (CLK32) +#define CLOCK_TICK_RATE (16000000) #endif diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h index 4281838873e..6b437f7c995 100644 --- a/include/asm-arm/arch-ixp4xx/nslu2.h +++ b/include/asm-arm/arch-ixp4xx/nslu2.h @@ -76,6 +76,7 @@ #define NSLU2_GPIO_BUZZ 4 #define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ) + /* LEDs */ #define NSLU2_LED_RED NSLU2_GPIO0 @@ -84,8 +85,8 @@ #define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED) #define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN) -#define NSLU2_LED_DISK1 NSLU2_GPIO2 -#define NSLU2_LED_DISK2 NSLU2_GPIO3 +#define NSLU2_LED_DISK1 NSLU2_GPIO3 +#define NSLU2_LED_DISK2 NSLU2_GPIO2 #define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2) #define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3) diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h new file mode 100644 index 00000000000..dbdec36ff0d --- /dev/null +++ b/include/asm-arm/arch-ixp4xx/udc.h @@ -0,0 +1,8 @@ +/* + * linux/include/asm-arm/arch-ixp4xx/udc.h + * + */ +#include <asm/mach/udc_pxa2xx.h> + +extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info); + diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h index d744d97c18a..645dbdfb390 100644 --- a/include/asm-arm/arch-l7200/io.h +++ b/include/asm-arm/arch-l7200/io.h @@ -17,59 +17,11 @@ /* * There are not real ISA nor PCI buses, so we fake it. */ -#define __io_pci(a) ((void __iomem *)(PCIO_BASE + (a))) -#define __mem_pci(a) (a) - -#define __ioaddr(p) __io_pci(p) - -/* - * Generic virtual read/write - */ -#define __arch_getb(a) (*(volatile unsigned char *)(a)) -#define __arch_getl(a) (*(volatile unsigned int *)(a)) - -static inline unsigned int __arch_getw(unsigned long a) -{ - unsigned int value; - __asm__ __volatile__("ldrh %0, [%1, #0] @ getw" - : "=&r" (value) - : "r" (a) : "cc"); - return value; -} - -#define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v)) -#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) - -static inline void __arch_putw(unsigned int value, unsigned long a) +static inline void __iomem *__io(unsigned long addr) { - __asm__ __volatile__("strh %0, [%1, #0] @ putw" - : : "r" (value), "r" (a) : "cc"); + return (void __iomem *)addr; } - -/* - * Translated address IO functions - * - * IO address has already been translated to a virtual address - */ -#define outb_t(v,p) (*(volatile unsigned char *)(p) = (v)) -#define inb_t(p) (*(volatile unsigned char *)(p)) -#define outw_t(v,p) (*(volatile unsigned int *)(p) = (v)) -#define inw_t(p) (*(volatile unsigned int *)(p)) -#define outl_t(v,p) (*(volatile unsigned long *)(p) = (v)) -#define inl_t(p) (*(volatile unsigned long *)(p)) - -/* - * FIXME - These are to allow for linking. On all the other - * ARM platforms, the entire IO space is contiguous. - * The 7200 has three separate IO spaces. The below - * macros will eventually become more involved. Use - * with caution and don't be surprised by kernel oopses!!! - */ -#define inb(p) inb_t(p) -#define inw(p) inw_t(p) -#define inl(p) inl_t(p) -#define outb(v,p) outb_t(v,p) -#define outw(v,p) outw_t(v,p) -#define outl(v,p) outl_t(v,p) +#define __io(a) __io(a) +#define __mem_pci(a) (a) #endif diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h index 9f1a58cbf40..9b0c8012e71 100644 --- a/include/asm-arm/arch-lh7a40x/memory.h +++ b/include/asm-arm/arch-lh7a40x/memory.h @@ -58,18 +58,6 @@ #endif /* - * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory - * and return the mem_map of that node. - */ -# define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) - -/* - * Given a page frame number, find the owning node of the memory - * and return the mem_map of that node. - */ -# define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) - -/* * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory * and returns the index corresponding to the appropriate page in the * node's mem_map. diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h index eaf6d43939e..e17f9881faf 100644 --- a/include/asm-arm/arch-pxa/memory.h +++ b/include/asm-arm/arch-pxa/memory.h @@ -27,7 +27,6 @@ #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) -#ifdef CONFIG_DISCONTIGMEM /* * The nodes are matched with the physical SDRAM banks as follows: * @@ -35,38 +34,9 @@ * node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff * node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff * node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff + * + * This needs a node mem size of 26 bits. */ - -/* - * Given a kernel address, find the home node of the underlying memory. - */ -#define KVADDR_TO_NID(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> 26) - -/* - * Given a page frame number, convert it to a node id. - */ -#define PFN_TO_NID(pfn) (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT)) - -/* - * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory - * and returns the mem_map of that node. - */ -#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) - -/* - * Given a page frame number, find the owning node of the memory - * and returns the mem_map of that node. - */ -#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ -#define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & 0x03ffffff) >> PAGE_SHIFT) - -#endif +#define NODE_MEM_SIZE_BITS 26 #endif diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index cff752f3523..083e03c5639 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -99,7 +99,7 @@ #define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ #define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ #define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_ENRINTR (1 << 9) /* The end of Receive */ +#define DCSR_EORINTR (1 << 9) /* The end of Receive */ #endif #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ #define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ @@ -803,12 +803,11 @@ #define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ #define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ #define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCISR1_IECC (1 << 31) /* IntEn - Configuration Change */ -#define UDCISR1_IESOF (1 << 30) /* IntEn - Start of Frame */ -#define UDCISR1_IERU (1 << 29) /* IntEn - Resume */ -#define UDCISR1_IESU (1 << 28) /* IntEn - Suspend */ -#define UDCISR1_IERS (1 << 27) /* IntEn - Reset */ - +#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ +#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ +#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ +#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ +#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ #define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ #define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ diff --git a/include/asm-arm/arch-s3c2410/h1940.h b/include/asm-arm/arch-s3c2410/h1940.h new file mode 100644 index 00000000000..6135592e60f --- /dev/null +++ b/include/asm-arm/arch-s3c2410/h1940.h @@ -0,0 +1,21 @@ +/* linux/include/asm-arm/arch-s3c2410/h1940.h + * + * Copyright 2006 Ben Dooks <ben-linux@fluff.org> + * + * H1940 definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_H1940_H +#define __ASM_ARCH_H1940_H + +#define H1940_SUSPEND_CHECKSUM (0x30003ff8) +#define H1940_SUSPEND_RESUMEAT (0x30081000) +#define H1940_SUSPEND_CHECK (0x30080000) + +extern void h1940_pm_return(void); + +#endif /* __ASM_ARCH_H1940_H */ diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h index 718246d8595..4f72a853a5c 100644 --- a/include/asm-arm/arch-s3c2410/system.h +++ b/include/asm-arm/arch-s3c2410/system.h @@ -71,7 +71,7 @@ arch_reset(char mode) /* set the watchdog to go and reset... */ __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | - S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); + S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); /* wait for reset to assert... */ mdelay(5000); diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/include/asm-arm/arch-sa1100/jornada720.h deleted file mode 100644 index 3f37ca07806..00000000000 --- a/include/asm-arm/arch-sa1100/jornada720.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/jornada720.h - * - * Created 2000/11/29 by John Ankcorn <jca@lcs.mit.edu> - * - * This file contains the hardware specific definitions for HP Jornada 720 - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#error "include <asm/hardware.h> instead" -#endif - -#define SA1111_BASE (0x40000000) - -#define GPIO_JORNADA720_KEYBOARD GPIO_GPIO(0) -#define GPIO_JORNADA720_MOUSE GPIO_GPIO(9) - -#define GPIO_JORNADA720_KEYBOARD_IRQ IRQ_GPIO0 -#define GPIO_JORNADA720_MOUSE_IRQ IRQ_GPIO9 - -/* MCU COMMANDS */ -#define MCU_GetBatteryData 0xc0 -#define MCU_GetScanKeyCode 0x90 -#define MCU_GetTouchSamples 0xa0 -#define MCU_GetContrast 0xD0 -#define MCU_SetContrast 0xD1 -#define MCU_GetBrightness 0xD2 -#define MCU_SetBrightness 0xD3 -#define MCU_ContrastOff 0xD8 -#define MCU_BrightnessOff 0xD9 -#define MCU_PWMOFF 0xDF -#define MCU_TxDummy 0x11 -#define MCU_ErrorCode 0x00 - -#ifndef __ASSEMBLY__ - -void jornada720_mcu_init(void); -void jornada_contrast(int arg_contrast); -void jornada720_battery(void); -int jornada720_getkey(unsigned char *data, int size); -#endif diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h index 1ff172dc8e3..0e907fc6d42 100644 --- a/include/asm-arm/arch-sa1100/memory.h +++ b/include/asm-arm/arch-sa1100/memory.h @@ -39,7 +39,6 @@ void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes); #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) -#ifdef CONFIG_DISCONTIGMEM /* * Because of the wide memory address space between physical RAM banks on the * SA1100, it's much convenient to use Linux's NUMA support to implement our @@ -57,38 +56,7 @@ void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes); * node 2: 0xd0000000 - 0xd7ffffff * node 3: 0xd8000000 - 0xdfffffff */ - -/* - * Given a kernel address, find the home node of the underlying memory. - */ -#define KVADDR_TO_NID(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> 27) - -/* - * Given a page frame number, convert it to a node id. - */ -#define PFN_TO_NID(pfn) (((pfn) - PHYS_PFN_OFFSET) >> (27 - PAGE_SHIFT)) - -/* - * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory - * and return the mem_map of that node. - */ -#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) - -/* - * Given a page frame number, find the owning node of the memory - * and return the mem_map of that node. - */ -#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ -#define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & 0x07ffffff) >> PAGE_SHIFT) - -#endif +#define NODE_MEM_SIZE_BITS 27 /* * Cache flushing area - SA1100 zero bank diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h index 0e36fd5d87d..7b62351f097 100644 --- a/include/asm-arm/bug.h +++ b/include/asm-arm/bug.h @@ -4,10 +4,10 @@ #ifdef CONFIG_BUG #ifdef CONFIG_DEBUG_BUGVERBOSE -extern void __bug(const char *file, int line, void *data) __attribute__((noreturn)); +extern void __bug(const char *file, int line) __attribute__((noreturn)); /* give file/line information */ -#define BUG() __bug(__FILE__, __LINE__, NULL) +#define BUG() __bug(__FILE__, __LINE__) #else diff --git a/include/asm-arm/cnt32_to_63.h b/include/asm-arm/cnt32_to_63.h new file mode 100644 index 00000000000..480c873fa74 --- /dev/null +++ b/include/asm-arm/cnt32_to_63.h @@ -0,0 +1,78 @@ +/* + * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits + * + * Author: Nicolas Pitre + * Created: December 3, 2006 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#ifndef __INCLUDE_CNT32_TO_63_H__ +#define __INCLUDE_CNT32_TO_63_H__ + +#include <linux/compiler.h> +#include <asm/types.h> +#include <asm/byteorder.h> + +/* + * Prototype: u64 cnt32_to_63(u32 cnt) + * Many hardware clock counters are only 32 bits wide and therefore have + * a relatively short period making wrap-arounds rather frequent. This + * is a problem when implementing sched_clock() for example, where a 64-bit + * non-wrapping monotonic value is expected to be returned. + * + * To overcome that limitation, let's extend a 32-bit counter to 63 bits + * in a completely lock free fashion. Bits 0 to 31 of the clock are provided + * by the hardware while bits 32 to 62 are stored in memory. The top bit in + * memory is used to synchronize with the hardware clock half-period. When + * the top bit of both counters (hardware and in memory) differ then the + * memory is updated with a new value, incrementing it when the hardware + * counter wraps around. + * + * Because a word store in memory is atomic then the incremented value will + * always be in synch with the top bit indicating to any potential concurrent + * reader if the value in memory is up to date or not with regards to the + * needed increment. And any race in updating the value in memory is harmless + * as the same value would simply be stored more than once. + * + * The only restriction for the algorithm to work properly is that this + * code must be executed at least once per each half period of the 32-bit + * counter to properly update the state bit in memory. This is usually not a + * problem in practice, but if it is then a kernel timer could be scheduled + * to manage for this code to be executed often enough. + * + * Note that the top bit (bit 63) in the returned value should be considered + * as garbage. It is not cleared here because callers are likely to use a + * multiplier on the returned value which can get rid of the top bit + * implicitly by making the multiplier even, therefore saving on a runtime + * clear-bit instruction. Otherwise caller must remember to clear the top + * bit explicitly. + */ + +/* this is used only to give gcc a clue about good code generation */ +typedef union { + struct { +#if defined(__LITTLE_ENDIAN) + u32 lo, hi; +#elif defined(__BIG_ENDIAN) + u32 hi, lo; +#endif + }; + u64 val; +} cnt32_to_63_t; + +#define cnt32_to_63(cnt_lo) \ +({ \ + static volatile u32 __m_cnt_hi = 0; \ + cnt32_to_63_t __x; \ + __x.hi = __m_cnt_hi; \ + __x.lo = (cnt_lo); \ + if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ + __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ + __x.val; \ +}) + +#endif diff --git a/include/asm-arm/div64.h b/include/asm-arm/div64.h index 3682616804c..37e0a96e878 100644 --- a/include/asm-arm/div64.h +++ b/include/asm-arm/div64.h @@ -27,7 +27,7 @@ #define __xh "r1" #endif -#define do_div(n,base) \ +#define __do_div_asm(n, base) \ ({ \ register unsigned int __base asm("r4") = base; \ register unsigned long long __n asm("r0") = n; \ @@ -45,4 +45,182 @@ __rem; \ }) +#if __GNUC__ < 4 + +/* + * gcc versions earlier than 4.0 are simply too problematic for the + * optimized implementation below. First there is gcc PR 15089 that + * tend to trig on more complex constructs, spurious .global __udivsi3 + * are inserted even if none of those symbols are referenced in the + * generated code, and those gcc versions are not able to do constant + * propagation on long long values anyway. + */ +#define do_div(n, base) __do_div_asm(n, base) + +#elif __GNUC__ >= 4 + +#include <asm/bug.h> + +/* + * If the divisor happens to be constant, we determine the appropriate + * inverse at compile time to turn the division into a few inline + * multiplications instead which is much faster. And yet only if compiling + * for ARMv4 or higher (we need umull/umlal) and if the gcc version is + * sufficiently recent to perform proper long long constant propagation. + * (It is unfortunate that gcc doesn't perform all this internally.) + */ +#define do_div(n, base) \ +({ \ + unsigned int __r, __b = (base); \ + if (!__builtin_constant_p(__b) || __b == 0 || \ + (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) { \ + /* non-constant divisor (or zero): slow path */ \ + __r = __do_div_asm(n, __b); \ + } else if ((__b & (__b - 1)) == 0) { \ + /* Trivial: __b is constant and a power of 2 */ \ + /* gcc does the right thing with this code. */ \ + __r = n; \ + __r &= (__b - 1); \ + n /= __b; \ + } else { \ + /* Multiply by inverse of __b: n/b = n*(p/b)/p */ \ + /* We rely on the fact that most of this code gets */ \ + /* optimized away at compile time due to constant */ \ + /* propagation and only a couple inline assembly */ \ + /* instructions should remain. Better avoid any */ \ + /* code construct that might prevent that. */ \ + unsigned long long __res, __x, __t, __m, __n = n; \ + unsigned int __c, __p, __z = 0; \ + /* preserve low part of n for reminder computation */ \ + __r = __n; \ + /* determine number of bits to represent __b */ \ + __p = 1 << __div64_fls(__b); \ + /* compute __m = ((__p << 64) + __b - 1) / __b */ \ + __m = (~0ULL / __b) * __p; \ + __m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b; \ + /* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */ \ + __x = ~0ULL / __b * __b - 1; \ + __res = (__m & 0xffffffff) * (__x & 0xffffffff); \ + __res >>= 32; \ + __res += (__m & 0xffffffff) * (__x >> 32); \ + __t = __res; \ + __res += (__x & 0xffffffff) * (__m >> 32); \ + __t = (__res < __t) ? (1ULL << 32) : 0; \ + __res = (__res >> 32) + __t; \ + __res += (__m >> 32) * (__x >> 32); \ + __res /= __p; \ + /* Now sanitize and optimize what we've got. */ \ + if (~0ULL % (__b / (__b & -__b)) == 0) { \ + /* those cases can be simplified with: */ \ + __n /= (__b & -__b); \ + __m = ~0ULL / (__b / (__b & -__b)); \ + __p = 1; \ + __c = 1; \ + } else if (__res != __x / __b) { \ + /* We can't get away without a correction */ \ + /* to compensate for bit truncation errors. */ \ + /* To avoid it we'd need an additional bit */ \ + /* to represent __m which would overflow it. */ \ + /* Instead we do m=p/b and n/b=(n*m+m)/p. */ \ + __c = 1; \ + /* Compute __m = (__p << 64) / __b */ \ + __m = (~0ULL / __b) * __p; \ + __m += ((~0ULL % __b + 1) * __p) / __b; \ + } else { \ + /* Reduce __m/__p, and try to clear bit 31 */ \ + /* of __m when possible otherwise that'll */ \ + /* need extra overflow handling later. */ \ + unsigned int __bits = -(__m & -__m); \ + __bits |= __m >> 32; \ + __bits = (~__bits) << 1; \ + /* If __bits == 0 then setting bit 31 is */ \ + /* unavoidable. Simply apply the maximum */ \ + /* possible reduction in that case. */ \ + /* Otherwise the MSB of __bits indicates the */ \ + /* best reduction we should apply. */ \ + if (!__bits) { \ + __p /= (__m & -__m); \ + __m /= (__m & -__m); \ + } else { \ + __p >>= __div64_fls(__bits); \ + __m >>= __div64_fls(__bits); \ + } \ + /* No correction needed. */ \ + __c = 0; \ + } \ + /* Now we have a combination of 2 conditions: */ \ + /* 1) whether or not we need a correction (__c), and */ \ + /* 2) whether or not there might be an overflow in */ \ + /* the cross product (__m & ((1<<63) | (1<<31))) */ \ + /* Select the best insn combination to perform the */ \ + /* actual __m * __n / (__p << 64) operation. */ \ + if (!__c) { \ + asm ( "umull %Q0, %R0, %1, %Q2\n\t" \ + "mov %Q0, #0" \ + : "=&r" (__res) \ + : "r" (__m), "r" (__n) \ + : "cc" ); \ + } else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \ + __res = __m; \ + asm ( "umlal %Q0, %R0, %Q1, %Q2\n\t" \ + "mov %Q0, #0" \ + : "+r" (__res) \ + : "r" (__m), "r" (__n) \ + : "cc" ); \ + } else { \ + asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \ + "cmn %Q0, %Q1\n\t" \ + "adcs %R0, %R0, %R1\n\t" \ + "adc %Q0, %3, #0" \ + : "=&r" (__res) \ + : "r" (__m), "r" (__n), "r" (__z) \ + : "cc" ); \ + } \ + if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \ + asm ( "umlal %R0, %Q0, %R1, %Q2\n\t" \ + "umlal %R0, %Q0, %Q1, %R2\n\t" \ + "mov %R0, #0\n\t" \ + "umlal %Q0, %R0, %R1, %R2" \ + : "+r" (__res) \ + : "r" (__m), "r" (__n) \ + : "cc" ); \ + } else { \ + asm ( "umlal %R0, %Q0, %R2, %Q3\n\t" \ + "umlal %R0, %1, %Q2, %R3\n\t" \ + "mov %R0, #0\n\t" \ + "adds %Q0, %1, %Q0\n\t" \ + "adc %R0, %R0, #0\n\t" \ + "umlal %Q0, %R0, %R2, %R3" \ + : "+r" (__res), "+r" (__z) \ + : "r" (__m), "r" (__n) \ + : "cc" ); \ + } \ + __res /= __p; \ + /* The reminder can be computed with 32-bit regs */ \ + /* only, and gcc is good at that. */ \ + { \ + unsigned int __res0 = __res; \ + unsigned int __b0 = __b; \ + __r -= __res0 * __b0; \ + } \ + /* BUG_ON(__r >= __b || __res * __b + __r != n); */ \ + n = __res; \ + } \ + __r; \ +}) + +/* our own fls implementation to make sure constant propagation is fine */ +#define __div64_fls(bits) \ +({ \ + unsigned int __left = (bits), __nr = 0; \ + if (__left & 0xffff0000) __nr += 16, __left >>= 16; \ + if (__left & 0x0000ff00) __nr += 8, __left >>= 8; \ + if (__left & 0x000000f0) __nr += 4, __left >>= 4; \ + if (__left & 0x0000000c) __nr += 2, __left >>= 2; \ + if (__left & 0x00000002) __nr += 1; \ + __nr; \ +}) + +#endif + #endif diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h index 17f0c656d27..642382d2c9f 100644 --- a/include/asm-arm/elf.h +++ b/include/asm-arm/elf.h @@ -1,17 +1,22 @@ #ifndef __ASMARM_ELF_H #define __ASMARM_ELF_H - +#ifndef __ASSEMBLY__ /* * ELF register definitions.. */ - #include <asm/ptrace.h> #include <asm/user.h> typedef unsigned long elf_greg_t; typedef unsigned long elf_freg_t[3]; +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_fp elf_fpregset_t; +#endif + #define EM_ARM 40 #define EF_ARM_APCS26 0x08 #define EF_ARM_SOFT_FLOAT 0x200 @@ -23,11 +28,6 @@ typedef unsigned long elf_freg_t[3]; #define R_ARM_CALL 28 #define R_ARM_JUMP24 29 -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_fp elf_fpregset_t; - /* * These are used to set parameters in the core dumps. */ @@ -39,97 +39,99 @@ typedef struct user_fp elf_fpregset_t; #endif #define ELF_ARCH EM_ARM -#ifdef __KERNEL__ -#include <asm/procinfo.h> - /* - * This is used to ensure we don't load something for the wrong architecture. + * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP */ -#define elf_check_arch(x) ( ((x)->e_machine == EM_ARM) && (ELF_PROC_OK((x))) ) - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - -/* When the program starts, a1 contains a pointer to a function to be - registered with atexit, as per the SVR4 ABI. A value of 0 means we - have no such handler. */ -#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0 - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. */ +#define HWCAP_SWP 1 +#define HWCAP_HALF 2 +#define HWCAP_THUMB 4 +#define HWCAP_26BIT 8 /* Play it safe */ +#define HWCAP_FAST_MULT 16 +#define HWCAP_FPA 32 +#define HWCAP_VFP 64 +#define HWCAP_EDSP 128 +#define HWCAP_JAVA 256 +#define HWCAP_IWMMXT 512 +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +/* + * This yields a mask that user programs can use to figure out what + * instruction set this cpu supports. + */ #define ELF_HWCAP (elf_hwcap) +extern unsigned int elf_hwcap; -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -/* For now we just provide a fairly general string that describes the - processor family. This could be made more specific later if someone - implemented optimisations that require it. 26-bit CPUs give you - "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't - supported). 32-bit CPUs give you "v3[lb]" for anything based on an - ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1 - core. */ - +/* + * This yields a string that ld.so will use to load implementation + * specific libraries for optimization. This is more specific in + * intent than poking at uname or /proc/cpuinfo. + * + * For now we just provide a fairly general string that describes the + * processor family. This could be made more specific later if someone + * implemented optimisations that require it. 26-bit CPUs give you + * "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't + * supported). 32-bit CPUs give you "v3[lb]" for anything based on an + * ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1 + * core. + */ #define ELF_PLATFORM_SIZE 8 -extern char elf_platform[]; #define ELF_PLATFORM (elf_platform) +extern char elf_platform[]; +#endif + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x)) + /* * 32-bit code is always OK. Some cpus can do 26-bit, some can't. */ #define ELF_PROC_OK(x) (ELF_THUMB_OK(x) && ELF_26BIT_OK(x)) #define ELF_THUMB_OK(x) \ - (( (elf_hwcap & HWCAP_THUMB) && ((x)->e_entry & 1) == 1) || \ + ((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \ ((x)->e_entry & 3) == 0) #define ELF_26BIT_OK(x) \ - (( (elf_hwcap & HWCAP_26BIT) && (x)->e_flags & EF_ARM_APCS26) || \ + ((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \ ((x)->e_flags & EF_ARM_APCS26) == 0) -#ifndef CONFIG_IWMMXT +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 -/* Old NetWinder binaries were compiled in such a way that the iBCS - heuristic always trips on them. Until these binaries become uncommon - enough not to care, don't trust the `ibcs' flag here. In any case - there is no other ELF system currently supported by iBCS. - @@ Could print a warning message to encourage users to upgrade. */ -#define SET_PERSONALITY(ex,ibcs2) \ - set_personality(((ex).e_flags&EF_ARM_APCS26 ?PER_LINUX :PER_LINUX_32BIT)) +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ -#else +#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) + +/* When the program starts, a1 contains a pointer to a function to be + registered with atexit, as per the SVR4 ABI. A value of 0 means we + have no such handler. */ +#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0 /* - * All iWMMXt capable CPUs don't support 26-bit mode. Yet they can run - * legacy binaries which used to contain FPA11 floating point instructions - * that have always been emulated by the kernel. PFA11 and iWMMXt overlap - * on coprocessor 1 space though. We therefore must decide if given task - * is allowed to use CP 0 and 1 for iWMMXt, or if they should be blocked - * at all times for the prefetch exception handler to catch FPA11 opcodes - * and emulate them. The best indication to discriminate those two cases - * is the SOFT_FLOAT flag in the ELF header. + * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0 + * and CP1, we only enable access to the iWMMXt coprocessor if the + * binary is EABI or softfloat (and thus, guaranteed not to use + * FPA instructions.) */ - -#define SET_PERSONALITY(ex,ibcs2) \ -do { \ - set_personality(PER_LINUX_32BIT); \ - if (((ex).e_flags & EF_ARM_EABI_MASK) || \ - ((ex).e_flags & EF_ARM_SOFT_FLOAT)) \ - set_thread_flag(TIF_USING_IWMMXT); \ - else \ - clear_thread_flag(TIF_USING_IWMMXT); \ -} while (0) - -#endif +#define SET_PERSONALITY(ex, ibcs2) \ + do { \ + if ((ex).e_flags & EF_ARM_APCS26) { \ + set_personality(PER_LINUX); \ + } else { \ + set_personality(PER_LINUX_32BIT); \ + if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \ + set_thread_flag(TIF_USING_IWMMXT); \ + else \ + clear_thread_flag(TIF_USING_IWMMXT); \ + } \ + } while (0) #endif diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index ae999fd5dc6..288f76b166d 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -75,14 +75,6 @@ extern void __readwrite_bug(const char *fn); */ #include <asm/arch/io.h> -#ifdef __io_pci -#warning machine class uses buggy __io_pci -#endif -#if defined(__arch_putb) || defined(__arch_putw) || defined(__arch_putl) || \ - defined(__arch_getb) || defined(__arch_getw) || defined(__arch_getl) -#warning machine class uses old __arch_putw or __arch_getw -#endif - /* * IO port access primitives * ------------------------- diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h index 0e017ecf209..eb0bfba6570 100644 --- a/include/asm-arm/mach/irq.h +++ b/include/asm-arm/mach/irq.h @@ -22,12 +22,6 @@ extern void init_FIQ(void); extern int show_fiq_list(struct seq_file *, void *); /* - * Function wrappers - */ -#define set_irq_chipdata(irq, d) set_irq_chip_data(irq, d) -#define get_irq_chipdata(irq) get_irq_chip_data(irq) - -/* * Obsolete inline function for calling irq descriptor handlers. */ static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) @@ -44,12 +38,6 @@ void set_irq_flags(unsigned int irq, unsigned int flags); /* * This is for easy migration, but should be changed in the source */ -#define do_level_IRQ handle_level_irq -#define do_edge_IRQ handle_edge_irq -#define do_simple_IRQ handle_simple_irq -#define irqdesc irq_desc -#define irqchip irq_chip - #define do_bad_IRQ(irq,desc) \ do { \ spin_lock(&desc->lock); \ diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h index 91d536c215d..d9bfb39adab 100644 --- a/include/asm-arm/memory.h +++ b/include/asm-arm/memory.h @@ -215,6 +215,7 @@ static inline __deprecated void *bus_to_virt(unsigned long x) * virt_addr_valid(k) indicates whether a virtual address is valid */ #ifndef CONFIG_DISCONTIGMEM + #define ARCH_PFN_OFFSET PHYS_PFN_OFFSET #define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) @@ -230,6 +231,7 @@ static inline __deprecated void *bus_to_virt(unsigned long x) * around in memory. */ #include <linux/numa.h> + #define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn) #define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT) @@ -256,6 +258,43 @@ static inline __deprecated void *bus_to_virt(unsigned long x) */ #define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT) +/* + * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory + * and returns the mem_map of that node. + */ +#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) + +/* + * Given a page frame number, find the owning node of the memory + * and returns the mem_map of that node. + */ +#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) + +#ifdef NODE_MEM_SIZE_BITS +#define NODE_MEM_SIZE_MASK ((1 << NODE_MEM_SIZE_BITS) - 1) + +/* + * Given a kernel address, find the home node of the underlying memory. + */ +#define KVADDR_TO_NID(addr) \ + (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS) + +/* + * Given a page frame number, convert it to a node id. + */ +#define PFN_TO_NID(pfn) \ + (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT)) + +/* + * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory + * and returns the index corresponding to the appropriate page in the + * node's mem_map. + */ +#define LOCAL_MAP_NR(addr) \ + (((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT) + +#endif /* NODE_MEM_SIZE_BITS */ + #endif /* !CONFIG_DISCONTIGMEM */ /* diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h index c1b264dff28..7b1c9acdf79 100644 --- a/include/asm-arm/pgtable-nommu.h +++ b/include/asm-arm/pgtable-nommu.h @@ -44,7 +44,6 @@ #define PAGE_READONLY __pgprot(0) #define PAGE_KERNEL __pgprot(0) -//extern void paging_init(struct meminfo *, struct machine_desc *); #define swapper_pg_dir ((pgd_t *) 0) #define __swp_type(x) (0) diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index ed8cb5963e9..88cd5c784ef 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -169,8 +169,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define L_PTE_WRITE (1 << 5) #define L_PTE_EXEC (1 << 6) #define L_PTE_DIRTY (1 << 7) -#define L_PTE_COHERENT (1 << 9) /* I/O coherent (xsc3) */ -#define L_PTE_SHARED (1 << 10) /* shared between CPUs (v6) */ +#define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */ #define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */ #ifndef __ASSEMBLY__ diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h index 04f4d34c631..b442e8e2a80 100644 --- a/include/asm-arm/processor.h +++ b/include/asm-arm/processor.h @@ -20,7 +20,6 @@ #ifdef __KERNEL__ #include <asm/ptrace.h> -#include <asm/procinfo.h> #include <asm/types.h> union debug_insn { diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h index 91a31adfa8a..4d3c685075e 100644 --- a/include/asm-arm/procinfo.h +++ b/include/asm-arm/procinfo.h @@ -10,7 +10,7 @@ #ifndef __ASM_PROCINFO_H #define __ASM_PROCINFO_H -#ifndef __ASSEMBLY__ +#ifdef __KERNEL__ struct cpu_tlb_fns; struct cpu_user_fns; @@ -42,19 +42,8 @@ struct proc_info_list { struct cpu_cache_fns *cache; }; -extern unsigned int elf_hwcap; - -#endif /* __ASSEMBLY__ */ - -#define HWCAP_SWP 1 -#define HWCAP_HALF 2 -#define HWCAP_THUMB 4 -#define HWCAP_26BIT 8 /* Play it safe */ -#define HWCAP_FAST_MULT 16 -#define HWCAP_FPA 32 -#define HWCAP_VFP 64 -#define HWCAP_EDSP 128 -#define HWCAP_JAVA 256 -#define HWCAP_IWMMXT 512 - +#else /* __KERNEL__ */ +#include <asm/elf.h> +#warning "Please include asm/elf.h instead" +#endif /* __KERNEL__ */ #endif diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index f28b236139e..d9b8bddc873 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -94,8 +94,18 @@ static inline struct thread_info *current_thread_info(void) return (struct thread_info *)(sp & ~(THREAD_SIZE - 1)); } -extern struct thread_info *alloc_thread_info(struct task_struct *task); -extern void free_thread_info(struct thread_info *); +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) \ + ((struct thread_info *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, \ + THREAD_SIZE_ORDER)) +#else +#define alloc_thread_info(tsk) \ + ((struct thread_info *)__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER)) +#endif + +#define free_thread_info(info) \ + free_pages((unsigned long)info, THREAD_SIZE_ORDER); #define thread_saved_pc(tsk) \ ((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc))) diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h b/include/asm-avr32/arch-at32ap/at91_pdc.h index ce1150d4438..79d6e02fa45 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h +++ b/include/asm-avr32/arch-at32ap/at91_pdc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h + * include/asm-arm/arch-at91rm9200/at91_pdc.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People @@ -13,8 +13,8 @@ * (at your option) any later version. */ -#ifndef AT91RM9200_PDC_H -#define AT91RM9200_PDC_H +#ifndef AT91_PDC_H +#define AT91_PDC_H #define AT91_PDC_RPR 0x100 /* Receive Pointer Register */ #define AT91_PDC_RCR 0x104 /* Receive Counter Register */ diff --git a/include/linux/i2c-pxa.h b/include/linux/i2c-pxa.h index 5f3eaf80222..41dcdfe7f62 100644 --- a/include/linux/i2c-pxa.h +++ b/include/linux/i2c-pxa.h @@ -1,29 +1,6 @@ #ifndef _LINUX_I2C_ALGO_PXA_H #define _LINUX_I2C_ALGO_PXA_H -struct i2c_eeprom_emu_watcher { - void (*write)(void *, unsigned int addr, unsigned char newval); -}; - -struct i2c_eeprom_emu_watch { - struct list_head node; - unsigned int start; - unsigned int end; - struct i2c_eeprom_emu_watcher *ops; - void *data; -}; - -#define I2C_EEPROM_EMU_SIZE (256) - -struct i2c_eeprom_emu { - unsigned int size; - unsigned int ptr; - unsigned int seen_start; - struct list_head watch; - - unsigned char bytes[I2C_EEPROM_EMU_SIZE]; -}; - typedef enum i2c_slave_event_e { I2C_SLAVE_EVENT_START_READ, I2C_SLAVE_EVENT_START_WRITE, @@ -37,12 +14,4 @@ struct i2c_slave_client { void (*write)(void *ptr, unsigned int val); }; -extern int i2c_eeprom_emu_addwatcher(struct i2c_eeprom_emu *, void *data, - unsigned int addr, unsigned int size, - struct i2c_eeprom_emu_watcher *); - -extern void i2c_eeprom_emu_delwatcher(struct i2c_eeprom_emu *, void *data, struct i2c_eeprom_emu_watcher *watcher); - -extern struct i2c_eeprom_emu *i2c_pxa_get_eeprom(void); - #endif /* _LINUX_I2C_ALGO_PXA_H */ |