summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-s3c2440/mach-gta02.c76
-rw-r--r--drivers/mfd/pcf50633-core.c3
-rw-r--r--drivers/video/backlight/88pm860x_bl.c2
-rw-r--r--drivers/video/backlight/Kconfig116
-rw-r--r--drivers/video/backlight/Makefile4
-rw-r--r--drivers/video/backlight/adp8860_bl.c838
-rw-r--r--drivers/video/backlight/adx_bl.c4
-rw-r--r--drivers/video/backlight/ep93xx_bl.c160
-rw-r--r--drivers/video/backlight/l4f00242t03.c11
-rw-r--r--drivers/video/backlight/max8925_bl.c1
-rw-r--r--drivers/video/backlight/mbp_nvidia_bl.c47
-rw-r--r--drivers/video/backlight/pcf50633-backlight.c190
-rw-r--r--drivers/video/backlight/s6e63m0.c920
-rw-r--r--drivers/video/backlight/s6e63m0_gamma.h266
-rw-r--r--include/linux/i2c/adp8860.h154
-rw-r--r--include/linux/lcd.h23
-rw-r--r--include/linux/mfd/pcf50633/backlight.h51
-rw-r--r--include/linux/mfd/pcf50633/core.h4
18 files changed, 2750 insertions, 120 deletions
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 45799c608d8..9e39faa283b 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -49,7 +49,6 @@
#include <linux/io.h>
#include <linux/i2c.h>
-#include <linux/backlight.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/pcf50633/core.h>
@@ -57,6 +56,7 @@
#include <linux/mfd/pcf50633/adc.h>
#include <linux/mfd/pcf50633/gpio.h>
#include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/backlight.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -254,6 +254,12 @@ static char *gta02_batteries[] = {
"battery",
};
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+ .default_brightness = 0x3f,
+ .default_brightness_limit = 0,
+ .ramp_time = 5,
+};
+
struct pcf50633_platform_data gta02_pcf_pdata = {
.resumers = {
[0] = PCF50633_INT1_USBINS |
@@ -271,6 +277,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.charger_reference_current_ma = 1000,
+ .backlight_data = &gta02_backlight_data,
+
.reg_init_data = {
[PCF50633_REGULATOR_AUTO] = {
.constraints = {
@@ -478,71 +486,6 @@ static struct s3c2410_udc_mach_info gta02_udc_cfg = {
};
-
-
-static void gta02_bl_set_intensity(int intensity)
-{
- struct pcf50633 *pcf = gta02_pcf;
- int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-
- /* We map 8-bit intensity to 6-bit intensity in hardware. */
- intensity >>= 2;
-
- /*
- * This can happen during, eg, print of panic on blanked console,
- * but we can't service i2c without interrupts active, so abort.
- */
- if (in_atomic()) {
- printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
- return;
- }
-
- old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
- if (intensity == old_intensity)
- return;
-
- /* We can't do this anywhere else. */
- pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
-
- if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
- old_intensity = 0;
-
- /*
- * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
- * if seen, you have to re-enable the LED unit.
- */
- if (!intensity || !old_intensity)
- pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
-
- /* Illegal to set LEDOUT to 0. */
- if (!intensity)
- pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
- else
- pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
- intensity);
-
- if (intensity)
- pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
-
-}
-
-static struct generic_bl_info gta02_bl_info = {
- .name = "gta02-bl",
- .max_intensity = 0xff,
- .default_intensity = 0xff,
- .set_bl_intensity = gta02_bl_set_intensity,
-};
-
-static struct platform_device gta02_bl_dev = {
- .name = "generic-bl",
- .id = 1,
- .dev = {
- .platform_data = &gta02_bl_info,
- },
-};
-
-
-
/* USB */
static struct s3c2410_hcd_info gta02_usb_info __initdata = {
.port[0] = {
@@ -579,7 +522,6 @@ static struct platform_device *gta02_devices[] __initdata = {
/* These guys DO need to be children of PMU. */
static struct platform_device *gta02_devices_pmu_children[] = {
- &gta02_bl_dev,
};
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 63a614d696c..dc95ddb708f 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -620,6 +620,9 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
&pcf->mbc_pdev);
pcf50633_client_dev_register(pcf, "pcf50633-adc",
&pcf->adc_pdev);
+ pcf50633_client_dev_register(pcf, "pcf50633-backlight",
+ &pcf->bl_pdev);
+
for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
struct platform_device *pdev;
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index 68d2518fada..38ffc3fbcbe 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -222,6 +222,7 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
data->port = __check_device(pdata, name);
if (data->port < 0) {
dev_err(&pdev->dev, "wrong platform data is assigned");
+ kfree(data);
return -EINVAL;
}
@@ -266,6 +267,7 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
backlight_update_status(bl);
return 0;
out:
+ backlight_device_unregister(bl);
kfree(data);
return ret;
}
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index c025c84601b..e54a337227e 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -8,12 +8,13 @@ menuconfig BACKLIGHT_LCD_SUPPORT
Enable this to be able to choose the drivers for controlling the
backlight and the LCD panel on some platforms, for example on PDAs.
+if BACKLIGHT_LCD_SUPPORT
+
#
# LCD
#
config LCD_CLASS_DEVICE
tristate "Lowlevel LCD controls"
- depends on BACKLIGHT_LCD_SUPPORT
default m
help
This framework adds support for low-level control of LCD.
@@ -24,31 +25,32 @@ config LCD_CLASS_DEVICE
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
+if LCD_CLASS_DEVICE
+
config LCD_CORGI
tristate "LCD Panel support for SHARP corgi/spitz model"
- depends on LCD_CLASS_DEVICE && SPI_MASTER && PXA_SHARPSL
+ depends on SPI_MASTER && PXA_SHARPSL
help
Say y here to support the LCD panels usually found on SHARP
corgi (C7x0) and spitz (Cxx00) models.
config LCD_L4F00242T03
tristate "Epson L4F00242T03 LCD"
- depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
+ depends on SPI_MASTER && GENERIC_GPIO
help
SPI driver for Epson L4F00242T03. This provides basic support
for init and powering the LCD up/down through a sysfs interface.
config LCD_LMS283GF05
tristate "Samsung LMS283GF05 LCD"
- depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
+ depends on SPI_MASTER && GENERIC_GPIO
help
SPI driver for Samsung LMS283GF05. This provides basic support
for powering the LCD up/down through a sysfs interface.
config LCD_LTV350QV
tristate "Samsung LTV350QV LCD Panel"
- depends on LCD_CLASS_DEVICE && SPI_MASTER
- default n
+ depends on SPI_MASTER
help
If you have a Samsung LTV350QV LCD panel, say y to include a
power control driver for it. The panel starts up in power
@@ -59,60 +61,61 @@ config LCD_LTV350QV
config LCD_ILI9320
tristate
- depends on LCD_CLASS_DEVICE && BACKLIGHT_LCD_SUPPORT
- default n
help
If you have a panel based on the ILI9320 controller chip
then say y to include a power driver for it.
config LCD_TDO24M
tristate "Toppoly TDO24M and TDO35S LCD Panels support"
- depends on LCD_CLASS_DEVICE && SPI_MASTER
- default n
+ depends on SPI_MASTER
help
If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
include the support for it.
config LCD_VGG2432A4
tristate "VGG2432A4 LCM device support"
- depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER
+ depends on SPI_MASTER
select LCD_ILI9320
- default n
help
If you have a VGG2432A4 panel based on the ILI9320 controller chip
then say y to include a power driver for it.
config LCD_PLATFORM
tristate "Platform LCD controls"
- depends on LCD_CLASS_DEVICE
help
This driver provides a platform-device registered LCD power
control interface.
config LCD_TOSA
tristate "Sharp SL-6000 LCD Driver"
- depends on LCD_CLASS_DEVICE && SPI
- depends on MACH_TOSA
- default n
+ depends on SPI && MACH_TOSA
help
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its LCD.
config LCD_HP700
tristate "HP Jornada 700 series LCD Driver"
- depends on LCD_CLASS_DEVICE
depends on SA1100_JORNADA720_SSP && !PREEMPT
default y
help
If you have an HP Jornada 700 series handheld (710/720/728)
say Y to enable LCD control driver.
+config LCD_S6E63M0
+ tristate "S6E63M0 AMOLED LCD Driver"
+ depends on SPI && BACKLIGHT_CLASS_DEVICE
+ default n
+ help
+ If you have an S6E63M0 LCD Panel, say Y to enable its
+ LCD control driver.
+
+endif # LCD_CLASS_DEVICE
+
#
# Backlight
#
config BACKLIGHT_CLASS_DEVICE
tristate "Lowlevel Backlight controls"
- depends on BACKLIGHT_LCD_SUPPORT
default m
help
This framework adds support for low-level control of the LCD
@@ -121,9 +124,11 @@ config BACKLIGHT_CLASS_DEVICE
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
+if BACKLIGHT_CLASS_DEVICE
+
config BACKLIGHT_ATMEL_LCDC
bool "Atmel LCDC Contrast-as-Backlight control"
- depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
+ depends on FB_ATMEL
default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
help
This provides a backlight control internal to the Atmel LCDC
@@ -136,8 +141,7 @@ config BACKLIGHT_ATMEL_LCDC
config BACKLIGHT_ATMEL_PWM
tristate "Atmel PWM backlight control"
- depends on BACKLIGHT_CLASS_DEVICE && ATMEL_PWM
- default n
+ depends on ATMEL_PWM
help
Say Y here if you want to use the PWM peripheral in Atmel AT91 and
AVR32 devices. This driver will need additional platform data to know
@@ -146,9 +150,18 @@ config BACKLIGHT_ATMEL_PWM
To compile this driver as a module, choose M here: the module will be
called atmel-pwm-bl.
+config BACKLIGHT_EP93XX
+ tristate "Cirrus EP93xx Backlight Driver"
+ depends on FB_EP93XX
+ help
+ If you have a LCD backlight connected to the BRIGHT output of
+ the EP93xx, say Y here to enable this driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ep93xx_bl.
+
config BACKLIGHT_GENERIC
tristate "Generic (aka Sharp Corgi) Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE
default y
help
Say y to enable the generic platform backlight driver previously
@@ -157,7 +170,7 @@ config BACKLIGHT_GENERIC
config BACKLIGHT_LOCOMO
tristate "Sharp LOCOMO LCD/Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO
+ depends on SHARP_LOCOMO
default y
help
If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
@@ -165,7 +178,7 @@ config BACKLIGHT_LOCOMO
config BACKLIGHT_OMAP1
tristate "OMAP1 PWL-based LCD Backlight"
- depends on BACKLIGHT_CLASS_DEVICE && ARCH_OMAP1
+ depends on ARCH_OMAP1
default y
help
This driver controls the LCD backlight level and power for
@@ -174,7 +187,7 @@ config BACKLIGHT_OMAP1
config BACKLIGHT_HP680
tristate "HP Jornada 680 Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && SH_HP6XX
+ depends on SH_HP6XX
default y
help
If you have a HP Jornada 680, say y to enable the
@@ -182,7 +195,6 @@ config BACKLIGHT_HP680
config BACKLIGHT_HP700
tristate "HP Jornada 700 series Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE
depends on SA1100_JORNADA720_SSP && !PREEMPT
default y
help
@@ -191,76 +203,70 @@ config BACKLIGHT_HP700
config BACKLIGHT_PROGEAR
tristate "Frontpath ProGear Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && PCI && X86
- default n
+ depends on PCI && X86
help
If you have a Frontpath ProGear say Y to enable the
backlight driver.
config BACKLIGHT_CARILLO_RANCH
tristate "Intel Carillo Ranch Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
- default n
+ depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
help
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
backlight driver.
config BACKLIGHT_PWM
tristate "Generic PWM based Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && HAVE_PWM
+ depends on HAVE_PWM
help
If you have a LCD backlight adjustable by PWM, say Y to enable
this driver.
config BACKLIGHT_DA903X
tristate "Backlight Driver for DA9030/DA9034 using WLED"
- depends on BACKLIGHT_CLASS_DEVICE && PMIC_DA903X
+ depends on PMIC_DA903X
help
If you have a LCD backlight connected to the WLED output of DA9030
or DA9034 WLED output, say Y here to enable this driver.
config BACKLIGHT_MAX8925
tristate "Backlight driver for MAX8925"
- depends on BACKLIGHT_CLASS_DEVICE && MFD_MAX8925
+ depends on MFD_MAX8925
help
If you have a LCD backlight connected to the WLED output of MAX8925
WLED output, say Y here to enable this driver.
config BACKLIGHT_MBP_NVIDIA
tristate "MacBook Pro Nvidia Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && X86
- default n
+ depends on X86
help
If you have an Apple Macbook Pro with Nvidia graphics hardware say Y
to enable a driver for its backlight
config BACKLIGHT_TOSA
tristate "Sharp SL-6000 Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && I2C
- depends on MACH_TOSA && LCD_TOSA
- default n
+ depends on I2C && MACH_TOSA && LCD_TOSA
help
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its backlight
config BACKLIGHT_SAHARA
tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && X86
- default n
+ depends on X86
help
If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
backlight driver.
config BACKLIGHT_WM831X
tristate "WM831x PMIC Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X
+ depends on MFD_WM831X
help
If you have a backlight driven by the ISINK and DCDC of a
WM831x PMIC say y to enable the backlight driver for it.
config BACKLIGHT_ADX
tristate "Avionic Design Xanthos Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && ARCH_PXA_ADX
+ depends on ARCH_PXA_ADX
default y
help
Say Y to enable the backlight driver on Avionic Design Xanthos-based
@@ -268,7 +274,7 @@ config BACKLIGHT_ADX
config BACKLIGHT_ADP5520
tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
- depends on BACKLIGHT_CLASS_DEVICE && PMIC_ADP5520
+ depends on PMIC_ADP5520
help
If you have a LCD backlight connected to the BST/BL_SNK output of
ADP5520 or ADP5501, say Y here to enable this driver.
@@ -276,9 +282,31 @@ config BACKLIGHT_ADP5520
To compile this driver as a module, choose M here: the module will
be called adp5520_bl.
+config BACKLIGHT_ADP8860
+ tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ select NEW_LEDS
+ select LEDS_CLASS
+ help
+ If you have a LCD backlight connected to the ADP8860, ADP8861 or
+ ADP8863 say Y here to enable this driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called adp8860_bl.
+
config BACKLIGHT_88PM860X
tristate "Backlight Driver for 88PM8606 using WLED"
- depends on BACKLIGHT_CLASS_DEVICE && MFD_88PM860X
+ depends on MFD_88PM860X
help
Say Y to enable the backlight driver for Marvell 88PM8606.
+config BACKLIGHT_PCF50633
+ tristate "Backlight driver for NXP PCF50633 MFD"
+ depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633
+ help
+ If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
+ enable its driver.
+
+endif # BACKLIGHT_CLASS_DEVICE
+
+endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 09d1f14d625..44c0f81ad85 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -11,9 +11,11 @@ obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
+obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
+obj-$(CONFIG_BACKLIGHT_EP93XX) += ep93xx_bl.o
obj-$(CONFIG_BACKLIGHT_GENERIC) += generic_bl.o
obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
@@ -30,5 +32,7 @@ obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
+obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
+obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
new file mode 100644
index 00000000000..921ca37398f
--- /dev/null
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -0,0 +1,838 @@
+/*
+ * Backlight driver for Analog Devices ADP8860 Backlight Devices
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include <linux/i2c/adp8860.h>
+#define ADP8860_EXT_FEATURES
+#define ADP8860_USE_LEDS
+
+#define ADP8860_MFDVID 0x00 /* Manufacturer and device ID */
+#define ADP8860_MDCR 0x01 /* Device mode and status */
+#define ADP8860_MDCR2 0x02 /* Device mode and Status Register 2 */
+#define ADP8860_INTR_EN 0x03 /* Interrupts enable */
+#define ADP8860_CFGR 0x04 /* Configuration register */
+#define ADP8860_BLSEN 0x05 /* Sink enable backlight or independent */
+#define ADP8860_BLOFF 0x06 /* Backlight off timeout */
+#define ADP8860_BLDIM 0x07 /* Backlight dim timeout */
+#define ADP8860_BLFR 0x08 /* Backlight fade in and out rates */
+#define ADP8860_BLMX1 0x09 /* Backlight (Brightness Level 1-daylight) maximum current */
+#define ADP8860_BLDM1 0x0A /* Backlight (Brightness Level 1-daylight) dim current */
+#define ADP8860_BLMX2 0x0B /* Backlight (Brightness Level 2-office) maximum current */
+#define ADP8860_BLDM2 0x0C /* Backlight (Brightness Level 2-office) dim current */
+#define ADP8860_BLMX3 0x0D /* Backlight (Brightness Level 3-dark) maximum current */
+#define ADP8860_BLDM3 0x0E /* Backlight (Brightness Level 3-dark) dim current */
+#define ADP8860_ISCFR 0x0F /* Independent sink current fade control register */
+#define ADP8860_ISCC 0x10 /* Independent sink current control register */
+#define ADP8860_ISCT1 0x11 /* Independent Sink Current Timer Register LED[7:5] */
+#define ADP8860_ISCT2 0x12 /* Independent Sink Current Timer Register LED[4:1] */
+#define ADP8860_ISCF 0x13 /* Independent sink current fade register */
+#define ADP8860_ISC7 0x14 /* Independent Sink Current LED7 */
+#define ADP8860_ISC6 0x15 /* Independent Sink Current LED6 */
+#define ADP8860_ISC5 0x16 /* Independent Sink Current LED5 */
+#define ADP8860_ISC4 0x17 /* Independent Sink Current LED4 */
+#define ADP8860_ISC3 0x18 /* Independent Sink Current LED3 */
+#define ADP8860_ISC2 0x19 /* Independent Sink Current LED2 */
+#define ADP8860_ISC1 0x1A /* Independent Sink Current LED1 */
+#define ADP8860_CCFG 0x1B /* Comparator configuration */
+#define ADP8860_CCFG2 0x1C /* Second comparator configuration */
+#define ADP8860_L2_TRP 0x1D /* L2 comparator reference */
+#define ADP8860_L2_HYS 0x1E /* L2 hysteresis */
+#define ADP8860_L3_TRP 0x1F /* L3 comparator reference */
+#define ADP8860_L3_HYS 0x20 /* L3 hysteresis */
+#define ADP8860_PH1LEVL 0x21 /* First phototransistor ambient light level-low byte register */
+#define ADP8860_PH1LEVH 0x22 /* First phototransistor ambient light level-high byte register */
+#define ADP8860_PH2LEVL 0x23 /* Second phototransistor ambient light level-low byte register */
+#define ADP8860_PH2LEVH 0x24 /* Second phototransistor ambient light level-high byte register */
+
+#define ADP8860_MANUFID 0x0 /* Analog Devices ADP8860 Manufacturer ID */
+#define ADP8861_MANUFID 0x4 /* Analog Devices ADP8861 Manufacturer ID */
+#define ADP8863_MANUFID 0x2 /* Analog Devices ADP8863 Manufacturer ID */
+
+#define ADP8860_DEVID(x) ((x) & 0xF)
+#define ADP8860_MANID(x) ((x) >> 4)
+
+/* MDCR Device mode and status */
+#define INT_CFG (1 << 6)
+#define NSTBY (1 << 5)
+#define DIM_EN (1 << 4)
+#define GDWN_DIS (1 << 3)
+#define SIS_EN (1 << 2)
+#define CMP_AUTOEN (1 << 1)
+#define BLEN (1 << 0)
+
+/* ADP8860_CCFG Main ALS comparator level enable */
+#define L3_EN (1 << 1)
+#define L2_EN (1 << 0)
+
+#define CFGR_BLV_SHIFT 3
+#define CFGR_BLV_MASK 0x3
+#define ADP8860_FLAG_LED_MASK 0xFF
+
+#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4))
+#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1))
+#define ALS_CCFG_VAL(filt) ((0x7 & filt) << 5)
+
+enum {
+ adp8860,
+ adp8861,
+ adp8863
+};
+
+struct adp8860_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct i2c_client *client;
+ enum led_brightness new_brightness;
+ int id;
+ int flags;
+};
+
+struct adp8860_bl {
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct adp8860_led *led;
+ struct adp8860_backlight_platform_data *pdata;
+ struct mutex lock;
+ unsigned long cached_daylight_max;
+ int id;
+ int revid;
+ int current_brightness;
+ unsigned en_ambl_sens:1;
+ unsigned gdwn_dis:1;
+};
+
+static int adp8860_read(struct i2c_client *client, int reg, uint8_t *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
+ return ret;
+ }
+
+ *val = (uint8_t)ret;
+ return 0;
+}
+
+static int adp8860_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static int adp8860_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8860_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8860_read(client, reg, &reg_val);
+
+ if (!ret && ((reg_val & bit_mask) == 0)) {
+ reg_val |= bit_mask;
+ ret = adp8860_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+static int adp8860_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8860_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8860_read(client, reg, &reg_val);
+
+ if (!ret && (reg_val & bit_mask)) {
+ reg_val &= ~bit_mask;
+ ret = adp8860_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+/*
+ * Independent sink / LED
+ */
+#if defined(ADP8860_USE_LEDS)
+static void adp8860_led_work(struct work_struct *work)
+{
+ struct adp8860_led *led = container_of(work, struct adp8860_led, work);
+ adp8860_write(led->client, ADP8860_ISC1 - led->id + 1,
+ led->new_brightness >> 1);
+}
+
+static void adp8860_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct adp8860_led *led;
+
+ led = container_of(led_cdev, struct adp8860_led, cdev);
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+static int adp8860_led_setup(struct adp8860_led *led)
+{
+ struct i2c_client *client = led->client;
+ int ret = 0;
+
+ ret = adp8860_write(client, ADP8860_ISC1 - led->id + 1, 0);
+ ret |= adp8860_set_bits(client, ADP8860_ISCC, 1 << (led->id - 1));
+
+ if (led->id > 4)
+ ret |= adp8860_set_bits(client, ADP8860_ISCT1,
+ (led->flags & 0x3) << ((led->id - 5) * 2));
+ else
+ ret |= adp8860_set_bits(client, ADP8860_ISCT2,
+ (led->flags & 0x3) << ((led->id - 1) * 2));
+
+ return ret;
+}
+
+static int __devinit adp8860_led_probe(struct i2c_client *client)
+{
+ struct adp8860_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8860_bl *data = i2c_get_clientdata(client);
+ struct adp8860_led *led, *led_dat;
+ struct led_info *cur_led;
+ int ret, i;
+
+ led = kzalloc(sizeof(*led) * pdata->num_leds, GFP_KERNEL);
+ if (led == NULL) {
+ dev_err(&client->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ ret = adp8860_write(client, ADP8860_ISCFR, pdata->led_fade_law);
+ ret = adp8860_write(client, ADP8860_ISCT1,
+ (pdata->led_on_time & 0x3) << 6);
+ ret |= adp8860_write(client, ADP8860_ISCF,
+ FADE_VAL(pdata->led_fade_in, pdata->led_fade_out));
+
+ if (ret) {
+ dev_err(&client->dev, "failed to write\n");
+ goto err_free;
+ }
+
+ for (i = 0; i < pdata->num_leds; ++i) {
+ cur_led = &pdata->leds[i];
+ led_dat = &led[i];
+
+ led_dat->id = cur_led->flags & ADP8860_FLAG_LED_MASK;
+
+ if (led_dat->id > 7 || led_dat->id < 1) {
+ dev_err(&client->dev, "Invalid LED ID %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) {
+ dev_err(&client->dev, "LED %d used by Backlight\n",
+ led_dat->id);
+ goto err;
+ }
+
+ led_dat->cdev.name = cur_led->name;
+ led_dat->cdev.default_trigger = cur_led->default_trigger;
+ led_dat->cdev.brightness_set = adp8860_led_set;
+ led_dat->cdev.brightness = LED_OFF;
+ led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT;
+ led_dat->client = client;
+ led_dat->new_brightness = LED_OFF;
+ INIT_WORK(&led_dat->work, adp8860_led_work);
+
+ ret = led_classdev_register(&client->dev, &led_dat->cdev);
+ if (ret) {
+ dev_err(&client->dev, "failed to register LED %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ ret = adp8860_led_setup(led_dat);
+ if (ret) {
+ dev_err(&client->dev, "failed to write\n");
+ i++;
+ goto err;
+ }
+ }
+
+ data->led = led;
+
+ return 0;
+
+ err:
+ for (i = i - 1; i >= 0; --i) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ err_free:
+ kfree(led);
+
+ return ret;
+}
+
+static int __devexit adp8860_led_remove(struct i2c_client *client)
+{
+ struct adp8860_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8860_bl *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ led_classdev_unregister(&data->led[i].cdev);
+ cancel_work_sync(&data->led[i].work);
+ }
+
+ kfree(data->led);
+ return 0;
+}
+#else
+static int __devinit adp8860_led_probe(struct i2c_client *client)
+{
+ return 0;
+}
+
+static int __devexit adp8860_led_remove(struct i2c_client *client)
+{
+ return 0;
+}
+#endif
+
+static int adp8860_bl_set(struct backlight_device *bl, int brightness)
+{
+ struct adp8860_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ int ret = 0;
+
+ if (data->en_ambl_sens) {
+ if ((brightness > 0) && (brightness < ADP8860_MAX_BRIGHTNESS)) {
+ /* Disable Ambient Light auto adjust */
+ ret |= adp8860_clr_bits(client, ADP8860_MDCR,
+ CMP_AUTOEN);
+ ret |= adp8860_write(client, ADP8860_BLMX1, brightness);
+ } else {
+ /*
+ * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
+ * restore daylight l1 sysfs brightness
+ */
+ ret |= adp8860_write(client, ADP8860_BLMX1,
+ data->cached_daylight_max);
+ ret |= adp8860_set_bits(client, ADP8860_MDCR,
+ CMP_AUTOEN);
+ }
+ } else
+ ret |= adp8860_write(client, ADP8860_BLMX1, brightness);
+
+ if (data->current_brightness && brightness == 0)
+ ret |= adp8860_set_bits(client,
+ ADP8860_MDCR, DIM_EN);
+ else if (data->current_brightness == 0 && brightness)
+ ret |= adp8860_clr_bits(client,
+ ADP8860_MDCR, DIM_EN);
+
+ if (!ret)
+ data->current_brightness = brightness;
+
+ return ret;
+}
+
+static int adp8860_bl_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ return adp8860_bl_set(bl, brightness);
+}
+
+static int adp8860_bl_get_brightness(struct backlight_device *bl)
+{
+ struct adp8860_bl *data = bl_get_data(bl);
+
+ return data->current_brightness;
+}
+
+static const struct backlight_ops adp8860_bl_ops = {
+ .update_status = adp8860_bl_update_status,
+ .get_brightness = adp8860_bl_get_brightness,
+};
+
+static int adp8860_bl_setup(struct backlight_device *bl)
+{
+ struct adp8860_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ struct adp8860_backlight_platform_data *pdata = data->pdata;
+ int ret = 0;
+
+ ret |= adp8860_write(client, ADP8860_BLSEN, ~pdata->bl_led_assign);
+ ret |= adp8860_write(client, ADP8860_BLMX1, pdata->l1_daylight_max);
+ ret |= adp8860_write(client, ADP8860_BLDM1, pdata->l1_daylight_dim);
+
+ if (data->en_ambl_sens) {
+ data->cached_daylight_max = pdata->l1_daylight_max;
+ ret |= adp8860_write(client, ADP8860_BLMX2,
+ pdata->l2_office_max);
+ ret |= adp8860_write(client, ADP8860_BLDM2,
+ pdata->l2_office_dim);
+ ret |= adp8860_write(client, ADP8860_BLMX3,
+ pdata->l3_dark_max);
+ ret |= adp8860_write(client, ADP8860_BLDM3,
+ pdata->l3_dark_dim);
+
+ ret |= adp8860_write(client, ADP8860_L2_TRP, pdata->l2_trip);
+ ret |= adp8860_write(client, ADP8860_L2_HYS, pdata->l2_hyst);
+ ret |= adp8860_write(client, ADP8860_L3_TRP, pdata->l3_trip);
+ ret |= adp8860_write(client, ADP8860_L3_HYS, pdata->l3_hyst);
+ ret |= adp8860_write(client, ADP8860_CCFG, L2_EN | L3_EN |
+ ALS_CCFG_VAL(pdata->abml_filt));
+ }
+
+ ret |= adp8860_write(client, ADP8860_CFGR,
+ BL_CFGR_VAL(pdata->bl_fade_law, 0));
+
+ ret |= adp8860_write(client, ADP8860_BLFR, FADE_VAL(pdata->bl_fade_in,
+ pdata->bl_fade_out));
+
+ ret |= adp8860_set_bits(client, ADP8860_MDCR, BLEN | DIM_EN | NSTBY |
+ (data->gdwn_dis ? GDWN_DIS : 0));
+
+ return ret;
+}
+
+static ssize_t adp8860_show(struct device *dev, char *buf, int reg)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8860_read(data->client, reg, &reg_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n", reg_val);
+}
+
+static ssize_t adp8860_store(struct device *dev, const char *buf,
+ size_t count, int reg)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->lock);
+ adp8860_write(data->client, reg, val);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t adp8860_bl_l3_dark_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLMX3);
+}
+
+static ssize_t adp8860_bl_l3_dark_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8860_store(dev, buf, count, ADP8860_BLMX3);
+}
+
+static DEVICE_ATTR(l3_dark_max, 0664, adp8860_bl_l3_dark_max_show,
+ adp8860_bl_l3_dark_max_store);
+
+static ssize_t adp8860_bl_l2_office_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLMX2);
+}
+
+static ssize_t adp8860_bl_l2_office_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8860_store(dev, buf, count, ADP8860_BLMX2);
+}
+static DEVICE_ATTR(l2_office_max, 0664, adp8860_bl_l2_office_max_show,
+ adp8860_bl_l2_office_max_store);
+
+static ssize_t adp8860_bl_l1_daylight_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLMX1);
+}
+
+static ssize_t adp8860_bl_l1_daylight_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+
+ strict_strtoul(buf, 10, &data->cached_daylight_max);
+ return adp8860_store(dev, buf, count, ADP8860_BLMX1);
+}
+static DEVICE_ATTR(l1_daylight_max, 0664, adp8860_bl_l1_daylight_max_show,
+ adp8860_bl_l1_daylight_max_store);
+
+static ssize_t adp8860_bl_l3_dark_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLDM3);
+}
+
+static ssize_t adp8860_bl_l3_dark_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8860_store(dev, buf, count, ADP8860_BLDM3);
+}
+static DEVICE_ATTR(l3_dark_dim, 0664, adp8860_bl_l3_dark_dim_show,
+ adp8860_bl_l3_dark_dim_store);
+
+static ssize_t adp8860_bl_l2_office_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLDM2);
+}
+
+static ssize_t adp8860_bl_l2_office_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8860_store(dev, buf, count, ADP8860_BLDM2);
+}
+static DEVICE_ATTR(l2_office_dim, 0664, adp8860_bl_l2_office_dim_show,
+ adp8860_bl_l2_office_dim_store);
+
+static ssize_t adp8860_bl_l1_daylight_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLDM1);
+}
+
+static ssize_t adp8860_bl_l1_daylight_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8860_store(dev, buf, count, ADP8860_BLDM1);
+}
+static DEVICE_ATTR(l1_daylight_dim, 0664, adp8860_bl_l1_daylight_dim_show,
+ adp8860_bl_l1_daylight_dim_store);
+
+#ifdef ADP8860_EXT_FEATURES
+static ssize_t adp8860_bl_ambient_light_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+ uint16_t ret_val;
+
+ mutex_lock(&data->lock);
+ error = adp8860_read(data->client, ADP8860_PH1LEVL, &reg_val);
+ ret_val = reg_val;
+ error |= adp8860_read(data->client, ADP8860_PH1LEVH, &reg_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ /* Return 13-bit conversion value for the first light sensor */
+ ret_val += (reg_val & 0x1F) << 8;
+
+ return sprintf(buf, "%u\n", ret_val);
+}
+static DEVICE_ATTR(ambient_light_level, 0444,
+ adp8860_bl_ambient_light_level_show, NULL);
+
+static ssize_t adp8860_bl_ambient_light_zone_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8860_read(data->client, ADP8860_CFGR, &reg_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n",
+ ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1);
+}
+
+static ssize_t adp8860_bl_ambient_light_zone_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ uint8_t reg_val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ if (val == 0) {
+ /* Enable automatic ambient light sensing */
+ adp8860_set_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
+ } else if ((val > 0) && (val < 6)) {
+ /* Disable automatic ambient light sensing */
+ adp8860_clr_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
+
+ /* Set user supplied ambient light zone */
+ mutex_lock(&data->lock);
+ adp8860_read(data->client, ADP8860_CFGR, &reg_val);
+ reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
+ reg_val |= val << CFGR_BLV_SHIFT;
+ adp8860_write(data->client, ADP8860_CFGR, reg_val);
+ mutex_unlock(&data->lock);
+ }
+
+ return count;
+}
+static DEVICE_ATTR(ambient_light_zone, 0664,
+ adp8860_bl_ambient_light_zone_show,
+ adp8860_bl_ambient_light_zone_store);
+#endif
+
+static struct attribute *adp8860_bl_attributes[] = {
+ &dev_attr_l3_dark_max.attr,
+ &dev_attr_l3_dark_dim.attr,
+ &dev_attr_l2_office_max.attr,
+ &dev_attr_l2_office_dim.attr,
+ &dev_attr_l1_daylight_max.attr,
+ &dev_attr_l1_daylight_dim.attr,
+#ifdef ADP8860_EXT_FEATURES
+ &dev_attr_ambient_light_level.attr,
+ &dev_attr_ambient_light_zone.attr,
+#endif
+ NULL
+};
+
+static const struct attribute_group adp8860_bl_attr_group = {
+ .attrs = adp8860_bl_attributes,
+};
+
+static int __devinit adp8860_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct backlight_device *bl;
+ struct adp8860_bl *data;
+ struct adp8860_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct backlight_properties props;
+ uint8_t reg_val;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data?\n");
+ return -EINVAL;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ ret = adp8860_read(client, ADP8860_MFDVID, &reg_val);
+ if (ret < 0)
+ goto out2;
+
+ switch (ADP8860_MANID(reg_val)) {
+ case ADP8863_MANUFID:
+ data->gdwn_dis = !!pdata->gdwn_dis;
+ case ADP8860_MANUFID:
+ data->en_ambl_sens = !!pdata->en_ambl_sens;
+ break;
+ case ADP8861_MANUFID:
+ data->gdwn_dis = !!pdata->gdwn_dis;
+ break;
+ default:
+ dev_err(&client->dev, "failed to probe\n");
+ ret = -ENODEV;
+ goto out2;
+ }
+
+ /* It's confirmed that the DEVID field is actually a REVID */
+
+ data->revid = ADP8860_DEVID(reg_val);
+ data->client = client;
+ data->pdata = pdata;
+ data->id = id->driver_data;
+ data->current_brightness = 0;
+ i2c_set_clientdata(client, data);
+
+ memset(&props, 0, sizeof(props));
+ props.max_brightness = ADP8860_MAX_BRIGHTNESS;
+
+ mutex_init(&data->lock);
+
+ bl = backlight_device_register(dev_driver_string(&client->dev),
+ &client->dev, data, &adp8860_bl_ops, &props);
+ if (IS_ERR(bl)) {
+ dev_err(&client->dev, "failed to register backlight\n");
+ ret = PTR_ERR(bl);
+ goto out2;
+ }
+
+ bl->props.max_brightness =
+ bl->props.brightness = ADP8860_MAX_BRIGHTNESS;
+
+ data->bl = bl;
+
+ if (data->en_ambl_sens)
+ ret = sysfs_create_group(&bl->dev.kobj,
+ &adp8860_bl_attr_group);
+
+ if (ret) {
+ dev_err(&client->dev, "failed to register sysfs\n");
+ goto out1;
+ }
+
+ ret = adp8860_bl_setup(bl);
+ if (ret) {
+ ret = -EIO;
+ goto out;
+ }
+
+ backlight_update_status(bl);
+
+ dev_info(&client->dev, "%s Rev.%d Backlight\n",
+ client->name, data->revid);
+
+ if (pdata->num_leds)
+ adp8860_led_probe(client);
+
+ return 0;
+
+out:
+ if (data->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8860_bl_attr_group);
+out1:
+ backlight_device_unregister(bl);
+out2:
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+
+ return ret;
+}
+
+static int __devexit adp8860_remove(struct i2c_client *client)
+{
+ struct adp8860_bl *data = i2c_get_clientdata(client);
+
+ adp8860_clr_bits(client, ADP8860_MDCR, NSTBY);
+
+ if (data->led)
+ adp8860_led_remove(client);
+
+ if (data->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8860_bl_attr_group);
+
+ backlight_device_unregister(data->bl);
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp8860_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+ adp8860_clr_bits(client, ADP8860_MDCR, NSTBY);
+
+ return 0;
+}
+
+static int adp8860_i2c_resume(struct i2c_client *client)
+{
+ adp8860_set_bits(client, ADP8860_MDCR, NSTBY);
+
+ return 0;
+}
+#else
+#define adp8860_i2c_suspend NULL
+#define adp8860_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id adp8860_id[] = {
+ { "adp8860", adp8860 },
+ { "adp8861", adp8861 },
+ { "adp8863", adp8863 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adp8860_id);
+
+static struct i2c_driver adp8860_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+ .probe = adp8860_probe,
+ .remove = __devexit_p(adp8860_remove),
+ .suspend = adp8860_i2c_suspend,
+ .resume = adp8860_i2c_resume,
+ .id_table = adp8860_id,
+};
+
+static int __init adp8860_init(void)
+{
+ return i2c_add_driver(&adp8860_driver);
+}
+module_init(adp8860_init);
+
+static void __exit adp8860_exit(void)
+{
+ i2c_del_driver(&adp8860_driver);
+}
+module_exit(adp8860_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP8860 Backlight driver");
+MODULE_ALIAS("i2c:adp8860-backlight");
diff --git a/drivers/video/backlight/adx_bl.c b/drivers/video/backlight/adx_bl.c
index 7f4a7c30a98..fe9af129c5d 100644
--- a/drivers/video/backlight/adx_bl.c
+++ b/drivers/video/backlight/adx_bl.c
@@ -107,8 +107,8 @@ static int __devinit adx_backlight_probe(struct platform_device *pdev)
props.max_brightness = 0xff;
bldev = backlight_device_register(dev_name(&pdev->dev), &pdev->dev,
bl, &adx_backlight_ops, &props);
- if (!bldev) {
- ret = -ENOMEM;
+ if (IS_ERR(bldev)) {
+ ret = PTR_ERR(bldev);
goto out;
}
diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c
new file mode 100644
index 00000000000..b0cc4918480
--- /dev/null
+++ b/drivers/video/backlight/ep93xx_bl.c
@@ -0,0 +1,160 @@
+/*
+ * Driver for the Cirrus EP93xx lcd backlight
+ *
+ * Copyright (c) 2010 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver controls the pulse width modulated brightness control output,
+ * BRIGHT, on the Cirrus EP9307, EP9312, and EP9315 processors.
+ */
+
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+
+#include <mach/hardware.h>
+
+#define EP93XX_RASTER_REG(x) (EP93XX_RASTER_BASE + (x))
+#define EP93XX_RASTER_BRIGHTNESS EP93XX_RASTER_REG(0x20)
+
+#define EP93XX_MAX_COUNT 255
+#define EP93XX_MAX_BRIGHT 255
+#define EP93XX_DEF_BRIGHT 128
+
+struct ep93xxbl {
+ void __iomem *mmio;
+ int brightness;
+};
+
+static int ep93xxbl_set(struct backlight_device *bl, int brightness)
+{
+ struct ep93xxbl *ep93xxbl = bl_get_data(bl);
+
+ __raw_writel((brightness << 8) | EP93XX_MAX_COUNT, ep93xxbl->mmio);
+
+ ep93xxbl->brightness = brightness;
+
+ return 0;
+}
+
+static int ep93xxbl_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK ||
+ bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ return ep93xxbl_set(bl, brightness);
+}
+
+static int ep93xxbl_get_brightness(struct backlight_device *bl)
+{
+ struct ep93xxbl *ep93xxbl = bl_get_data(bl);
+
+ return ep93xxbl->brightness;
+}
+
+static const struct backlight_ops ep93xxbl_ops = {
+ .update_status = ep93xxbl_update_status,
+ .get_brightness = ep93xxbl_get_brightness,
+};
+
+static int __init ep93xxbl_probe(struct platform_device *dev)
+{
+ struct ep93xxbl *ep93xxbl;
+ struct backlight_device *bl;
+ struct backlight_properties props;
+
+ ep93xxbl = devm_kzalloc(&dev->dev, sizeof(*ep93xxbl), GFP_KERNEL);
+ if (!ep93xxbl)
+ return -ENOMEM;
+
+ /*
+ * This register is located in the range already ioremap'ed by
+ * the framebuffer driver. A MFD driver seems a bit of overkill
+ * to handle this so use the static I/O mapping; this address
+ * is already virtual.
+ *
+ * NOTE: No locking is required; the framebuffer does not touch
+ * this register.
+ */
+ ep93xxbl->mmio = EP93XX_RASTER_BRIGHTNESS;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = EP93XX_MAX_BRIGHT;
+ bl = backlight_device_register(dev->name, &dev->dev, ep93xxbl,
+ &ep93xxbl_ops, &props);
+ if (IS_ERR(bl))
+ return PTR_ERR(bl);
+
+ bl->props.brightness = EP93XX_DEF_BRIGHT;
+
+ platform_set_drvdata(dev, bl);
+
+ ep93xxbl_update_status(bl);
+
+ return 0;
+}
+
+static int ep93xxbl_remove(struct platform_device *dev)
+{
+ struct backlight_device *bl = platform_get_drvdata(dev);
+
+ backlight_device_unregister(bl);
+ platform_set_drvdata(dev, NULL);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ep93xxbl_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct backlight_device *bl = platform_get_drvdata(dev);
+
+ return ep93xxbl_set(bl, 0);
+}
+
+static int ep93xxbl_resume(struct platform_device *dev)
+{
+ struct backlight_device *bl = platform_get_drvdata(dev);
+
+ backlight_update_status(bl);
+ return 0;
+}
+#else
+#define ep93xxbl_suspend NULL
+#define ep93xxbl_resume NULL
+#endif
+
+static struct platform_driver ep93xxbl_driver = {
+ .driver = {
+ .name = "ep93xx-bl",
+ .owner = THIS_MODULE,
+ },
+ .probe = ep93xxbl_probe,
+ .remove = __devexit_p(ep93xxbl_remove),
+ .suspend = ep93xxbl_suspend,
+ .resume = ep93xxbl_resume,
+};
+
+static int __init ep93xxbl_init(void)
+{
+ return platform_driver_register(&ep93xxbl_driver);
+}
+module_init(ep93xxbl_init);
+
+static void __exit ep93xxbl_exit(void)
+{
+ platform_driver_unregister(&ep93xxbl_driver);
+}
+module_exit(ep93xxbl_exit);
+
+MODULE_DESCRIPTION("EP93xx Backlight Driver");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ep93xx-bl");
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index bcdb12c93ef..9093ef0fa86 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -125,8 +125,7 @@ static int __devinit l4f00242t03_probe(struct spi_device *spi)
if (priv == NULL) {
dev_err(&spi->dev, "No memory for this device.\n");
- ret = -ENOMEM;
- goto err;
+ return -ENOMEM;
}
dev_set_drvdata(&spi->dev, priv);
@@ -139,7 +138,7 @@ static int __devinit l4f00242t03_probe(struct spi_device *spi)
if (ret) {
dev_err(&spi->dev,
"Unable to get the lcd l4f00242t03 reset gpio.\n");
- return ret;
+ goto err;
}
ret = gpio_direction_output(pdata->reset_gpio, 1);
@@ -151,7 +150,7 @@ static int __devinit l4f00242t03_probe(struct spi_device *spi)
if (ret) {
dev_err(&spi->dev,
"Unable to get the lcd l4f00242t03 data en gpio.\n");
- return ret;
+ goto err2;
}
ret = gpio_direction_output(pdata->data_enable_gpio, 0);
@@ -222,9 +221,9 @@ static int __devexit l4f00242t03_remove(struct spi_device *spi)
gpio_free(pdata->reset_gpio);
if (priv->io_reg)
- regulator_put(priv->core_reg);
- if (priv->core_reg)
regulator_put(priv->io_reg);
+ if (priv->core_reg)
+ regulator_put(priv->core_reg);
kfree(priv);
diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c
index b5accc957ad..b2b2c7ba1f6 100644
--- a/drivers/video/backlight/max8925_bl.c
+++ b/drivers/video/backlight/max8925_bl.c
@@ -162,6 +162,7 @@ static int __devinit max8925_backlight_probe(struct platform_device *pdev)
backlight_update_status(bl);
return 0;
out:
+ backlight_device_unregister(bl);
kfree(data);
return ret;
}
diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c
index 1b5d3fe6bbb..9fb533f6373 100644
--- a/drivers/video/backlight/mbp_nvidia_bl.c
+++ b/drivers/video/backlight/mbp_nvidia_bl.c
@@ -141,7 +141,7 @@ static const struct dmi_system_id __initdata mbp_device_table[] = {
.callback = mbp_dmi_match,
.ident = "MacBook 1,1",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
},
.driver_data = (void *)&intel_chipset_data,
@@ -184,6 +184,42 @@ static const struct dmi_system_id __initdata mbp_device_table[] = {
},
{
.callback = mbp_dmi_match,
+ .ident = "MacBookPro 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookPro 1,2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,2"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookPro 2,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,1"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookPro 2,2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
.ident = "MacBookPro 3,1",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
@@ -238,6 +274,15 @@ static const struct dmi_system_id __initdata mbp_device_table[] = {
},
{
.callback = mbp_dmi_match,
+ .ident = "MacBook 6,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook6,1"),
+ },
+ .driver_data = (void *)&nvidia_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
.ident = "MacBookAir 2,1",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
diff --git a/drivers/video/backlight/pcf50633-backlight.c b/drivers/video/backlight/pcf50633-backlight.c
new file mode 100644
index 00000000000..3c424f7efdc
--- /dev/null
+++ b/drivers/video/backlight/pcf50633-backlight.c
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * PCF50633 backlight device driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <linux/backlight.h>
+#include <linux/fb.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/backlight.h>
+
+struct pcf50633_bl {
+ struct pcf50633 *pcf;
+ struct backlight_device *bl;
+
+ unsigned int brightness;
+ unsigned int brightness_limit;
+};
+
+/*
+ * pcf50633_bl_set_brightness_limit
+ *
+ * Update the brightness limit for the pc50633 backlight. The actual brightness
+ * will not go above the limit. This is useful to limit power drain for example
+ * on low battery.
+ *
+ * @dev: Pointer to a pcf50633 device
+ * @limit: The brightness limit. Valid values are 0-63
+ */
+int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit)
+{
+ struct pcf50633_bl *pcf_bl = platform_get_drvdata(pcf->bl_pdev);
+
+ if (!pcf_bl)
+ return -ENODEV;
+
+ pcf_bl->brightness_limit = limit & 0x3f;
+ backlight_update_status(pcf_bl->bl);
+
+ return 0;
+}
+
+static int pcf50633_bl_update_status(struct backlight_device *bl)
+{
+ struct pcf50633_bl *pcf_bl = bl_get_data(bl);
+ unsigned int new_brightness;
+
+
+ if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK) ||
+ bl->props.power != FB_BLANK_UNBLANK)
+ new_brightness = 0;
+ else if (bl->props.brightness < pcf_bl->brightness_limit)
+ new_brightness = bl->props.brightness;
+ else
+ new_brightness = pcf_bl->brightness_limit;
+
+
+ if (pcf_bl->brightness == new_brightness)
+ return 0;
+
+ if (new_brightness) {
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDOUT,
+ new_brightness);
+ if (!pcf_bl->brightness)
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 1);
+ } else {
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 0);
+ }
+
+ pcf_bl->brightness = new_brightness;
+
+ return 0;
+}
+
+static int pcf50633_bl_get_brightness(struct backlight_device *bl)
+{
+ struct pcf50633_bl *pcf_bl = bl_get_data(bl);
+ return pcf_bl->brightness;
+}
+
+static const struct backlight_ops pcf50633_bl_ops = {
+ .get_brightness = pcf50633_bl_get_brightness,
+ .update_status = pcf50633_bl_update_status,
+ .options = BL_CORE_SUSPENDRESUME,
+};
+
+static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct pcf50633_bl *pcf_bl;
+ struct device *parent = pdev->dev.parent;
+ struct pcf50633_platform_data *pcf50633_data = parent->platform_data;
+ struct pcf50633_bl_platform_data *pdata = pcf50633_data->backlight_data;
+ struct backlight_properties bl_props;
+
+ pcf_bl = kzalloc(sizeof(*pcf_bl), GFP_KERNEL);
+ if (!pcf_bl)
+ return -ENOMEM;
+
+ bl_props.max_brightness = 0x3f;
+ bl_props.power = FB_BLANK_UNBLANK;
+
+ if (pdata) {
+ bl_props.brightness = pdata->default_brightness;
+ pcf_bl->brightness_limit = pdata->default_brightness_limit;
+ } else {
+ bl_props.brightness = 0x3f;
+ pcf_bl->brightness_limit = 0x3f;
+ }
+
+ pcf_bl->pcf = dev_to_pcf50633(pdev->dev.parent);
+
+ pcf_bl->bl = backlight_device_register(pdev->name, &pdev->dev, pcf_bl,
+ &pcf50633_bl_ops, &bl_props);
+
+ if (IS_ERR(pcf_bl->bl)) {
+ ret = PTR_ERR(pcf_bl->bl);
+ goto err_free;
+ }
+
+ platform_set_drvdata(pdev, pcf_bl);
+
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDDIM, pdata->ramp_time);
+
+ /* Should be different from bl_props.brightness, so we do not exit
+ * update_status early the first time it's called */
+ pcf_bl->brightness = pcf_bl->bl->props.brightness + 1;
+
+ backlight_update_status(pcf_bl->bl);
+
+ return 0;
+
+err_free:
+ kfree(pcf_bl);
+
+ return ret;
+}
+
+static int __devexit pcf50633_bl_remove(struct platform_device *pdev)
+{
+ struct pcf50633_bl *pcf_bl = platform_get_drvdata(pdev);
+
+ backlight_device_unregister(pcf_bl->bl);
+
+ platform_set_drvdata(pdev, NULL);
+
+ kfree(pcf_bl);
+
+ return 0;
+}
+
+static struct platform_driver pcf50633_bl_driver = {
+ .probe = pcf50633_bl_probe,
+ .remove = __devexit_p(pcf50633_bl_remove),
+ .driver = {
+ .name = "pcf50633-backlight",
+ },
+};
+
+static int __init pcf50633_bl_init(void)
+{
+ return platform_driver_register(&pcf50633_bl_driver);
+}
+module_init(pcf50633_bl_init);
+
+static void __exit pcf50633_bl_exit(void)
+{
+ platform_driver_unregister(&pcf50633_bl_driver);
+}
+module_exit(pcf50633_bl_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("PCF50633 backlight driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-backlight");
diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
new file mode 100644
index 00000000000..a3128c9cb7a
--- /dev/null
+++ b/drivers/video/backlight/s6e63m0.c
@@ -0,0 +1,920 @@
+/*
+ * S6E63M0 AMOLED LCD panel driver.
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ *
+ * Derived from drivers/video/omap/lcd-apollon.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/wait.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/lcd.h>
+#include <linux/backlight.h>
+
+#include "s6e63m0_gamma.h"
+
+#define SLEEPMSEC 0x1000
+#define ENDDEF 0x2000
+#define DEFMASK 0xFF00
+#define COMMAND_ONLY 0xFE
+#define DATA_ONLY 0xFF
+
+#define MIN_BRIGHTNESS 0
+#define MAX_BRIGHTNESS 10
+
+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
+
+struct s6e63m0 {
+ struct device *dev;
+ struct spi_device *spi;
+ unsigned int power;
+ unsigned int current_brightness;
+ unsigned int gamma_mode;
+ unsigned int gamma_table_count;
+ struct lcd_device *ld;
+ struct backlight_device *bd;
+ struct lcd_platform_data *lcd_pd;
+};
+
+static const unsigned short SEQ_PANEL_CONDITION_SET[] = {
+ 0xF8, 0x01,
+ DATA_ONLY, 0x27,
+ DATA_ONLY, 0x27,
+ DATA_ONLY, 0x07,
+ DATA_ONLY, 0x07,
+ DATA_ONLY, 0x54,
+ DATA_ONLY, 0x9f,
+ DATA_ONLY, 0x63,
+ DATA_ONLY, 0x86,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x33,
+ DATA_ONLY, 0x0d,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_DISPLAY_CONDITION_SET[] = {
+ 0xf2, 0x02,
+ DATA_ONLY, 0x03,
+ DATA_ONLY, 0x1c,
+ DATA_ONLY, 0x10,
+ DATA_ONLY, 0x10,
+
+ 0xf7, 0x03,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_GAMMA_SETTING[] = {
+ 0xfa, 0x00,
+ DATA_ONLY, 0x18,
+ DATA_ONLY, 0x08,
+ DATA_ONLY, 0x24,
+ DATA_ONLY, 0x64,
+ DATA_ONLY, 0x56,
+ DATA_ONLY, 0x33,
+ DATA_ONLY, 0xb6,
+ DATA_ONLY, 0xba,
+ DATA_ONLY, 0xa8,
+ DATA_ONLY, 0xac,
+ DATA_ONLY, 0xb1,
+ DATA_ONLY, 0x9d,
+ DATA_ONLY, 0xc1,
+ DATA_ONLY, 0xc1,
+ DATA_ONLY, 0xb7,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x9c,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x9f,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0xd6,
+
+ 0xfa, 0x01,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_ETC_CONDITION_SET[] = {
+ 0xf6, 0x00,
+ DATA_ONLY, 0x8c,
+ DATA_ONLY, 0x07,
+
+ 0xb3, 0xc,
+
+ 0xb5, 0x2c,
+ DATA_ONLY, 0x12,
+ DATA_ONLY, 0x0c,
+ DATA_ONLY, 0x0a,
+ DATA_ONLY, 0x10,
+ DATA_ONLY, 0x0e,
+ DATA_ONLY, 0x17,
+ DATA_ONLY, 0x13,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x2a,
+ DATA_ONLY, 0x24,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1b,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x17,
+
+ DATA_ONLY, 0x2b,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x3a,
+ DATA_ONLY, 0x34,
+ DATA_ONLY, 0x30,
+ DATA_ONLY, 0x2c,
+ DATA_ONLY, 0x29,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x25,
+ DATA_ONLY, 0x23,
+ DATA_ONLY, 0x21,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x1e,
+ DATA_ONLY, 0x1e,
+
+ 0xb6, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x11,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x33,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+
+ 0xb7, 0x2c,
+ DATA_ONLY, 0x12,
+ DATA_ONLY, 0x0c,
+ DATA_ONLY, 0x0a,
+ DATA_ONLY, 0x10,
+ DATA_ONLY, 0x0e,
+ DATA_ONLY, 0x17,
+ DATA_ONLY, 0x13,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x2a,
+ DATA_ONLY, 0x24,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1b,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x17,
+
+ DATA_ONLY, 0x2b,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x3a,
+ DATA_ONLY, 0x34,
+ DATA_ONLY, 0x30,
+ DATA_ONLY, 0x2c,
+ DATA_ONLY, 0x29,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x25,
+ DATA_ONLY, 0x23,
+ DATA_ONLY, 0x21,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x1e,
+ DATA_ONLY, 0x1e,
+
+ 0xb8, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x11,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x33,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+
+ 0xb9, 0x2c,
+ DATA_ONLY, 0x12,
+ DATA_ONLY, 0x0c,
+ DATA_ONLY, 0x0a,
+ DATA_ONLY, 0x10,
+ DATA_ONLY, 0x0e,
+ DATA_ONLY, 0x17,
+ DATA_ONLY, 0x13,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x2a,
+ DATA_ONLY, 0x24,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1b,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x17,
+
+ DATA_ONLY, 0x2b,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x3a,
+ DATA_ONLY, 0x34,
+ DATA_ONLY, 0x30,
+ DATA_ONLY, 0x2c,
+ DATA_ONLY, 0x29,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x25,
+ DATA_ONLY, 0x23,
+ DATA_ONLY, 0x21,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x1e,
+ DATA_ONLY, 0x1e,
+
+ 0xba, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x11,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x33,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+
+ 0xc1, 0x4d,
+ DATA_ONLY, 0x96,
+ DATA_ONLY, 0x1d,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x01,
+ DATA_ONLY, 0xdf,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x03,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x03,
+ DATA_ONLY, 0x06,
+ DATA_ONLY, 0x09,
+ DATA_ONLY, 0x0d,
+ DATA_ONLY, 0x0f,
+ DATA_ONLY, 0x12,
+ DATA_ONLY, 0x15,
+ DATA_ONLY, 0x18,
+
+ 0xb2, 0x10,
+ DATA_ONLY, 0x10,
+ DATA_ONLY, 0x0b,
+ DATA_ONLY, 0x05,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_ACL_ON[] = {
+ /* ACL on */
+ 0xc0, 0x01,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_ACL_OFF[] = {
+ /* ACL off */
+ 0xc0, 0x00,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_ELVSS_ON[] = {
+ /* ELVSS on */
+ 0xb1, 0x0b,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_ELVSS_OFF[] = {
+ /* ELVSS off */
+ 0xb1, 0x0a,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_STAND_BY_OFF[] = {
+ 0x11, COMMAND_ONLY,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_STAND_BY_ON[] = {
+ 0x10, COMMAND_ONLY,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_DISPLAY_ON[] = {
+ 0x29, COMMAND_ONLY,
+
+ ENDDEF, 0x0000
+};
+
+
+static int s6e63m0_spi_write_byte(struct s6e63m0 *lcd, int addr, int data)
+{
+ u16 buf[1];
+ struct spi_message msg;
+
+ struct spi_transfer xfer = {
+ .len = 2,
+ .tx_buf = buf,
+ };
+
+ buf[0] = (addr << 8) | data;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ return spi_sync(lcd->spi, &msg);
+}
+
+static int s6e63m0_spi_write(struct s6e63m0 *lcd, unsigned char address,
+ unsigned char command)
+{
+ int ret = 0;
+
+ if (address != DATA_ONLY)
+ ret = s6e63m0_spi_write_byte(lcd, 0x0, address);
+ if (command != COMMAND_ONLY)
+ ret = s6e63m0_spi_write_byte(lcd, 0x1, command);
+
+ return ret;
+}
+
+static int s6e63m0_panel_send_sequence(struct s6e63m0 *lcd,
+ const unsigned short *wbuf)
+{
+ int ret = 0, i = 0;
+
+ while ((wbuf[i] & DEFMASK) != ENDDEF) {
+ if ((wbuf[i] & DEFMASK) != SLEEPMSEC) {
+ ret = s6e63m0_spi_write(lcd, wbuf[i], wbuf[i+1]);
+ if (ret)
+ break;
+ } else
+ udelay(wbuf[i+1]*1000);
+ i += 2;
+ }
+
+ return ret;
+}
+
+static int _s6e63m0_gamma_ctl(struct s6e63m0 *lcd, const unsigned int *gamma)
+{
+ unsigned int i = 0;
+ int ret = 0;
+
+ /* disable gamma table updating. */
+ ret = s6e63m0_spi_write(lcd, 0xfa, 0x00);
+ if (ret) {
+ dev_err(lcd->dev, "failed to disable gamma table updating.\n");
+ goto gamma_err;
+ }
+
+ for (i = 0 ; i < GAMMA_TABLE_COUNT; i++) {
+ ret = s6e63m0_spi_write(lcd, DATA_ONLY, gamma[i]);
+ if (ret) {
+ dev_err(lcd->dev, "failed to set gamma table.\n");
+ goto gamma_err;
+ }
+ }
+
+ /* update gamma table. */
+ ret = s6e63m0_spi_write(lcd, 0xfa, 0x01);
+ if (ret)
+ dev_err(lcd->dev, "failed to update gamma table.\n");
+
+gamma_err:
+ return ret;
+}
+
+static int s6e63m0_gamma_ctl(struct s6e63m0 *lcd, int gamma)
+{
+ int ret = 0;
+
+ ret = _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]);
+
+ return ret;
+}
+
+
+static int s6e63m0_ldi_init(struct s6e63m0 *lcd)
+{
+ int ret, i;
+ const unsigned short *init_seq[] = {
+ SEQ_PANEL_CONDITION_SET,
+ SEQ_DISPLAY_CONDITION_SET,
+ SEQ_GAMMA_SETTING,
+ SEQ_ETC_CONDITION_SET,
+ SEQ_ACL_ON,
+ SEQ_ELVSS_ON,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
+ ret = s6e63m0_panel_send_sequence(lcd, init_seq[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int s6e63m0_ldi_enable(struct s6e63m0 *lcd)
+{
+ int ret = 0, i;
+ const unsigned short *enable_seq[] = {
+ SEQ_STAND_BY_OFF,
+ SEQ_DISPLAY_ON,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(enable_seq); i++) {
+ ret = s6e63m0_panel_send_sequence(lcd, enable_seq[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int s6e63m0_ldi_disable(struct s6e63m0 *lcd)
+{
+ int ret;
+
+ ret = s6e63m0_panel_send_sequence(lcd, SEQ_STAND_BY_ON);
+
+ return ret;
+}
+
+static int s6e63m0_power_on(struct s6e63m0 *lcd)
+{
+ int ret = 0;
+ struct lcd_platform_data *pd = NULL;
+ struct backlight_device *bd = NULL;
+
+ pd = lcd->lcd_pd;
+ if (!pd) {
+ dev_err(lcd->dev, "platform data is NULL.\n");
+ return -EFAULT;
+ }
+
+ bd = lcd->bd;
+ if (!bd) {
+ dev_err(lcd->dev, "backlight device is NULL.\n");
+ return -EFAULT;
+ }
+
+ if (!pd->power_on) {
+ dev_err(lcd->dev, "power_on is NULL.\n");
+ return -EFAULT;
+ } else {
+ pd->power_on(lcd->ld, 1);
+ mdelay(pd->power_on_delay);
+ }
+
+ if (!pd->reset) {
+ dev_err(lcd->dev, "reset is NULL.\n");
+ return -EFAULT;
+ } else {
+ pd->reset(lcd->ld);
+ mdelay(pd->reset_delay);
+ }
+
+ ret = s6e63m0_ldi_init(lcd);
+ if (ret) {
+ dev_err(lcd->dev, "failed to initialize ldi.\n");
+ return ret;
+ }
+
+ ret = s6e63m0_ldi_enable(lcd);
+ if (ret) {
+ dev_err(lcd->dev, "failed to enable ldi.\n");
+ return ret;
+ }
+
+ /* set brightness to current value after power on or resume. */
+ ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness);
+ if (ret) {
+ dev_err(lcd->dev, "lcd gamma setting failed.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int s6e63m0_power_off(struct s6e63m0 *lcd)
+{
+ int ret = 0;
+ struct lcd_platform_data *pd = NULL;
+
+ pd = lcd->lcd_pd;
+ if (!pd) {
+ dev_err(lcd->dev, "platform data is NULL.\n");
+ return -EFAULT;
+ }
+
+ ret = s6e63m0_ldi_disable(lcd);
+ if (ret) {
+ dev_err(lcd->dev, "lcd setting failed.\n");
+ return -EIO;
+ }
+
+ mdelay(pd->power_off_delay);
+
+ if (!pd->power_on) {
+ dev_err(lcd->dev, "power_on is NULL.\n");
+ return -EFAULT;
+ } else
+ pd->power_on(lcd->ld, 0);
+
+ return 0;
+}
+
+static int s6e63m0_power(struct s6e63m0 *lcd, int power)
+{
+ int ret = 0;
+
+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+ ret = s6e63m0_power_on(lcd);
+ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+ ret = s6e63m0_power_off(lcd);
+
+ if (!ret)
+ lcd->power = power;
+
+ return ret;
+}
+
+static int s6e63m0_set_power(struct lcd_device *ld, int power)
+{
+ struct s6e63m0 *lcd = lcd_get_data(ld);
+
+ if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
+ power != FB_BLANK_NORMAL) {
+ dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
+ return -EINVAL;
+ }
+
+ return s6e63m0_power(lcd, power);
+}
+
+static int s6e63m0_get_power(struct lcd_device *ld)
+{
+ struct s6e63m0 *lcd = lcd_get_data(ld);
+
+ return lcd->power;
+}
+
+static int s6e63m0_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static int s6e63m0_set_brightness(struct backlight_device *bd)
+{
+ int ret = 0, brightness = bd->props.brightness;
+ struct s6e63m0 *lcd = bl_get_data(bd);
+
+ if (brightness < MIN_BRIGHTNESS ||
+ brightness > bd->props.max_brightness) {
+ dev_err(&bd->dev, "lcd brightness should be %d to %d.\n",
+ MIN_BRIGHTNESS, MAX_BRIGHTNESS);
+ return -EINVAL;
+ }
+
+ ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness);
+ if (ret) {
+ dev_err(&bd->dev, "lcd brightness setting failed.\n");
+ return -EIO;
+ }
+
+ return ret;
+}
+
+static struct lcd_ops s6e63m0_lcd_ops = {
+ .set_power = s6e63m0_set_power,
+ .get_power = s6e63m0_get_power,
+};
+
+static const struct backlight_ops s6e63m0_backlight_ops = {
+ .get_brightness = s6e63m0_get_brightness,
+ .update_status = s6e63m0_set_brightness,
+};
+
+static ssize_t s6e63m0_sysfs_show_gamma_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct s6e63m0 *lcd = dev_get_drvdata(dev);
+ char temp[10];
+
+ switch (lcd->gamma_mode) {
+ case 0:
+ sprintf(temp, "2.2 mode\n");
+ strcat(buf, temp);
+ break;
+ case 1:
+ sprintf(temp, "1.9 mode\n");
+ strcat(buf, temp);
+ break;
+ case 2:
+ sprintf(temp, "1.7 mode\n");
+ strcat(buf, temp);
+ break;
+ default:
+ dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7)n");
+ break;
+ }
+
+ return strlen(buf);
+}
+
+static ssize_t s6e63m0_sysfs_store_gamma_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct s6e63m0 *lcd = dev_get_drvdata(dev);
+ struct backlight_device *bd = NULL;
+ int brightness, rc;
+
+ rc = strict_strtoul(buf, 0, (unsigned long *)&lcd->gamma_mode);
+ if (rc < 0)
+ return rc;
+
+ bd = lcd->bd;
+
+ brightness = bd->props.brightness;
+
+ switch (lcd->gamma_mode) {
+ case 0:
+ _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]);
+ break;
+ case 1:
+ _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_19_table[brightness]);
+ break;
+ case 2:
+ _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_17_table[brightness]);
+ break;
+ default:
+ dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7\n");
+ _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]);
+ break;
+ }
+ return len;
+}
+
+static DEVICE_ATTR(gamma_mode, 0644,
+ s6e63m0_sysfs_show_gamma_mode, s6e63m0_sysfs_store_gamma_mode);
+
+static ssize_t s6e63m0_sysfs_show_gamma_table(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct s6e63m0 *lcd = dev_get_drvdata(dev);
+ char temp[3];
+
+ sprintf(temp, "%d\n", lcd->gamma_table_count);
+ strcpy(buf, temp);
+
+ return strlen(buf);
+}
+static DEVICE_ATTR(gamma_table, 0644,
+ s6e63m0_sysfs_show_gamma_table, NULL);
+
+static int __init s6e63m0_probe(struct spi_device *spi)
+{
+ int ret = 0;
+ struct s6e63m0 *lcd = NULL;
+ struct lcd_device *ld = NULL;
+ struct backlight_device *bd = NULL;
+
+ lcd = kzalloc(sizeof(struct s6e63m0), GFP_KERNEL);
+ if (!lcd)
+ return -ENOMEM;
+
+ /* s6e63m0 lcd panel uses 3-wire 9bits SPI Mode. */
+ spi->bits_per_word = 9;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&spi->dev, "spi setup failed.\n");
+ goto out_free_lcd;
+ }
+
+ lcd->spi = spi;
+ lcd->dev = &spi->dev;
+
+ lcd->lcd_pd = (struct lcd_platform_data *)spi->dev.platform_data;
+ if (!lcd->lcd_pd) {
+ dev_err(&spi->dev, "platform data is NULL.\n");
+ goto out_free_lcd;
+ }
+
+ ld = lcd_device_register("s6e63m0", &spi->dev, lcd, &s6e63m0_lcd_ops);
+ if (IS_ERR(ld)) {
+ ret = PTR_ERR(ld);
+ goto out_free_lcd;
+ }
+
+ lcd->ld = ld;
+
+ bd = backlight_device_register("s6e63m0bl-bl", &spi->dev, lcd,
+ &s6e63m0_backlight_ops, NULL);
+ if (IS_ERR(bd)) {
+ ret = PTR_ERR(bd);
+ goto out_lcd_unregister;
+ }
+
+ bd->props.max_brightness = MAX_BRIGHTNESS;
+ bd->props.brightness = MAX_BRIGHTNESS;
+ lcd->bd = bd;
+
+ /*
+ * it gets gamma table count available so it gets user
+ * know that.
+ */
+ lcd->gamma_table_count =
+ sizeof(gamma_table) / (MAX_GAMMA_LEVEL * sizeof(int));
+
+ ret = device_create_file(&(spi->dev), &dev_attr_gamma_mode);
+ if (ret < 0)
+ dev_err(&(spi->dev), "failed to add sysfs entries\n");
+
+ ret = device_create_file(&(spi->dev), &dev_attr_gamma_table);
+ if (ret < 0)
+ dev_err(&(spi->dev), "failed to add sysfs entries\n");
+
+ /*
+ * if lcd panel was on from bootloader like u-boot then
+ * do not lcd on.
+ */
+ if (!lcd->lcd_pd->lcd_enabled) {
+ /*
+ * if lcd panel was off from bootloader then
+ * current lcd status is powerdown and then
+ * it enables lcd panel.
+ */
+ lcd->power = FB_BLANK_POWERDOWN;
+
+ s6e63m0_power(lcd, FB_BLANK_UNBLANK);
+ } else
+ lcd->power = FB_BLANK_UNBLANK;
+
+ dev_set_drvdata(&spi->dev, lcd);
+
+ dev_info(&spi->dev, "s6e63m0 panel driver has been probed.\n");
+
+ return 0;
+
+out_lcd_unregister:
+ lcd_device_unregister(ld);
+out_free_lcd:
+ kfree(lcd);
+ return ret;
+}
+
+static int __devexit s6e63m0_remove(struct spi_device *spi)
+{
+ struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+
+ s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
+ lcd_device_unregister(lcd->ld);
+ kfree(lcd);
+
+ return 0;
+}
+
+#if defined(CONFIG_PM)
+unsigned int before_power;
+
+static int s6e63m0_suspend(struct spi_device *spi, pm_message_t mesg)
+{
+ int ret = 0;
+ struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power);
+
+ before_power = lcd->power;
+
+ /*
+ * when lcd panel is suspend, lcd panel becomes off
+ * regardless of status.
+ */
+ ret = s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
+
+ return ret;
+}
+
+static int s6e63m0_resume(struct spi_device *spi)
+{
+ int ret = 0;
+ struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+
+ /*
+ * after suspended, if lcd panel status is FB_BLANK_UNBLANK
+ * (at that time, before_power is FB_BLANK_UNBLANK) then
+ * it changes that status to FB_BLANK_POWERDOWN to get lcd on.
+ */
+ if (before_power == FB_BLANK_UNBLANK)
+ lcd->power = FB_BLANK_POWERDOWN;
+
+ dev_dbg(&spi->dev, "before_power = %d\n", before_power);
+
+ ret = s6e63m0_power(lcd, before_power);
+
+ return ret;
+}
+#else
+#define s6e63m0_suspend NULL
+#define s6e63m0_resume NULL
+#endif
+
+/* Power down all displays on reboot, poweroff or halt. */
+static void s6e63m0_shutdown(struct spi_device *spi)
+{
+ struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+
+ s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
+}
+
+static struct spi_driver s6e63m0_driver = {
+ .driver = {
+ .name = "s6e63m0",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = s6e63m0_probe,
+ .remove = __devexit_p(s6e63m0_remove),
+ .shutdown = s6e63m0_shutdown,
+ .suspend = s6e63m0_suspend,
+ .resume = s6e63m0_resume,
+};
+
+static int __init s6e63m0_init(void)
+{
+ return spi_register_driver(&s6e63m0_driver);
+}
+
+static void __exit s6e63m0_exit(void)
+{
+ spi_unregister_driver(&s6e63m0_driver);
+}
+
+module_init(s6e63m0_init);
+module_exit(s6e63m0_exit);
+
+MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("S6E63M0 LCD Driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/video/backlight/s6e63m0_gamma.h b/drivers/video/backlight/s6e63m0_gamma.h
new file mode 100644
index 00000000000..2c44bdb0696
--- /dev/null
+++ b/drivers/video/backlight/s6e63m0_gamma.h
@@ -0,0 +1,266 @@
+/* linux/drivers/video/samsung/s6e63m0_brightness.h
+ *
+ * Gamma level definitions.
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * InKi Dae <inki.dae@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S6E63M0_BRIGHTNESS_H
+#define _S6E63M0_BRIGHTNESS_H
+
+#define MAX_GAMMA_LEVEL 11
+#define GAMMA_TABLE_COUNT 21
+
+/* gamma value: 2.2 */
+static const unsigned int s6e63m0_22_300[] = {
+ 0x18, 0x08, 0x24, 0x5f, 0x50, 0x2d, 0xB6,
+ 0xB9, 0xA7, 0xAd, 0xB1, 0x9f, 0xbe, 0xC0,
+ 0xB5, 0x00, 0xa0, 0x00, 0xa4, 0x00, 0xdb
+};
+
+static const unsigned int s6e63m0_22_280[] = {
+ 0x18, 0x08, 0x24, 0x64, 0x56, 0x33, 0xB6,
+ 0xBA, 0xA8, 0xAC, 0xB1, 0x9D, 0xC1, 0xC1,
+ 0xB7, 0x00, 0x9C, 0x00, 0x9F, 0x00, 0xD6
+};
+
+static const unsigned int s6e63m0_22_260[] = {
+ 0x18, 0x08, 0x24, 0x66, 0x58, 0x34, 0xB6,
+ 0xBA, 0xA7, 0xAF, 0xB3, 0xA0, 0xC1, 0xC2,
+ 0xB7, 0x00, 0x97, 0x00, 0x9A, 0x00, 0xD1
+
+};
+
+static const unsigned int s6e63m0_22_240[] = {
+ 0x18, 0x08, 0x24, 0x62, 0x54, 0x30, 0xB9,
+ 0xBB, 0xA9, 0xB0, 0xB3, 0xA1, 0xC1, 0xC3,
+ 0xB7, 0x00, 0x91, 0x00, 0x95, 0x00, 0xDA
+
+};
+static const unsigned int s6e63m0_22_220[] = {
+ 0x18, 0x08, 0x24, 0x63, 0x53, 0x31, 0xB8,
+ 0xBC, 0xA9, 0xB0, 0xB5, 0xA2, 0xC4, 0xC4,
+ 0xB8, 0x00, 0x8B, 0x00, 0x8E, 0x00, 0xC2
+};
+
+static const unsigned int s6e63m0_22_200[] = {
+ 0x18, 0x08, 0x24, 0x66, 0x55, 0x34, 0xBA,
+ 0xBD, 0xAB, 0xB1, 0xB5, 0xA3, 0xC5, 0xC6,
+ 0xB9, 0x00, 0x85, 0x00, 0x88, 0x00, 0xBA
+};
+
+static const unsigned int s6e63m0_22_170[] = {
+ 0x18, 0x08, 0x24, 0x69, 0x54, 0x37, 0xBB,
+ 0xBE, 0xAC, 0xB4, 0xB7, 0xA6, 0xC7, 0xC8,
+ 0xBC, 0x00, 0x7B, 0x00, 0x7E, 0x00, 0xAB
+};
+
+static const unsigned int s6e63m0_22_140[] = {
+ 0x18, 0x08, 0x24, 0x6C, 0x54, 0x3A, 0xBC,
+ 0xBF, 0xAC, 0xB7, 0xBB, 0xA9, 0xC9, 0xC9,
+ 0xBE, 0x00, 0x71, 0x00, 0x73, 0x00, 0x9E
+};
+
+static const unsigned int s6e63m0_22_110[] = {
+ 0x18, 0x08, 0x24, 0x70, 0x51, 0x3E, 0xBF,
+ 0xC1, 0xAF, 0xB9, 0xBC, 0xAB, 0xCC, 0xCC,
+ 0xC2, 0x00, 0x65, 0x00, 0x67, 0x00, 0x8D
+};
+
+static const unsigned int s6e63m0_22_90[] = {
+ 0x18, 0x08, 0x24, 0x73, 0x4A, 0x3D, 0xC0,
+ 0xC2, 0xB1, 0xBB, 0xBE, 0xAC, 0xCE, 0xCF,
+ 0xC5, 0x00, 0x5D, 0x00, 0x5E, 0x00, 0x82
+};
+
+static const unsigned int s6e63m0_22_30[] = {
+ 0x18, 0x08, 0x24, 0x78, 0xEC, 0x3D, 0xC8,
+ 0xC2, 0xB6, 0xC4, 0xC7, 0xB6, 0xD5, 0xD7,
+ 0xCC, 0x00, 0x39, 0x00, 0x36, 0x00, 0x51
+};
+
+/* gamma value: 1.9 */
+static const unsigned int s6e63m0_19_300[] = {
+ 0x18, 0x08, 0x24, 0x61, 0x5F, 0x39, 0xBA,
+ 0xBD, 0xAD, 0xB1, 0xB6, 0xA5, 0xC4, 0xC5,
+ 0xBC, 0x00, 0xA0, 0x00, 0xA4, 0x00, 0xDB
+};
+
+static const unsigned int s6e63m0_19_280[] = {
+ 0x18, 0x08, 0x24, 0x61, 0x60, 0x39, 0xBB,
+ 0xBE, 0xAD, 0xB2, 0xB6, 0xA6, 0xC5, 0xC7,
+ 0xBD, 0x00, 0x9B, 0x00, 0x9E, 0x00, 0xD5
+};
+
+static const unsigned int s6e63m0_19_260[] = {
+ 0x18, 0x08, 0x24, 0x63, 0x61, 0x3B, 0xBA,
+ 0xBE, 0xAC, 0xB3, 0xB8, 0xA7, 0xC6, 0xC8,
+ 0xBD, 0x00, 0x96, 0x00, 0x98, 0x00, 0xCF
+};
+
+static const unsigned int s6e63m0_19_240[] = {
+ 0x18, 0x08, 0x24, 0x67, 0x64, 0x3F, 0xBB,
+ 0xBE, 0xAD, 0xB3, 0xB9, 0xA7, 0xC8, 0xC9,
+ 0xBE, 0x00, 0x90, 0x00, 0x92, 0x00, 0xC8
+};
+
+static const unsigned int s6e63m0_19_220[] = {
+ 0x18, 0x08, 0x24, 0x68, 0x64, 0x40, 0xBC,
+ 0xBF, 0xAF, 0xB4, 0xBA, 0xA9, 0xC8, 0xCA,
+ 0xBE, 0x00, 0x8B, 0x00, 0x8C, 0x00, 0xC0
+};
+
+static const unsigned int s6e63m0_19_200[] = {
+ 0x18, 0x08, 0x24, 0x68, 0x64, 0x3F, 0xBE,
+ 0xC0, 0xB0, 0xB6, 0xBB, 0xAB, 0xC8, 0xCB,
+ 0xBF, 0x00, 0x85, 0x00, 0x86, 0x00, 0xB8
+};
+
+static const unsigned int s6e63m0_19_170[] = {
+ 0x18, 0x08, 0x24, 0x69, 0x64, 0x40, 0xBF,
+ 0xC1, 0xB0, 0xB9, 0xBE, 0xAD, 0xCB, 0xCD,
+ 0xC2, 0x00, 0x7A, 0x00, 0x7B, 0x00, 0xAA
+};
+
+static const unsigned int s6e63m0_19_140[] = {
+ 0x18, 0x08, 0x24, 0x6E, 0x65, 0x45, 0xC0,
+ 0xC3, 0xB2, 0xBA, 0xBE, 0xAE, 0xCD, 0xD0,
+ 0xC4, 0x00, 0x70, 0x00, 0x70, 0x00, 0x9C
+};
+
+static const unsigned int s6e63m0_19_110[] = {
+ 0x18, 0x08, 0x24, 0x6F, 0x65, 0x46, 0xC2,
+ 0xC4, 0xB3, 0xBF, 0xC2, 0xB2, 0xCF, 0xD1,
+ 0xC6, 0x00, 0x64, 0x00, 0x64, 0x00, 0x8D
+};
+
+static const unsigned int s6e63m0_19_90[] = {
+ 0x18, 0x08, 0x24, 0x74, 0x60, 0x4A, 0xC3,
+ 0xC6, 0xB5, 0xBF, 0xC3, 0xB2, 0xD2, 0xD3,
+ 0xC8, 0x00, 0x5B, 0x00, 0x5B, 0x00, 0x81
+};
+
+static const unsigned int s6e63m0_19_30[] = {
+ 0x18, 0x08, 0x24, 0x84, 0x45, 0x4F, 0xCA,
+ 0xCB, 0xBC, 0xC9, 0xCB, 0xBC, 0xDA, 0xDA,
+ 0xD0, 0x00, 0x35, 0x00, 0x34, 0x00, 0x4E
+};
+
+/* gamma value: 1.7 */
+static const unsigned int s6e63m0_17_300[] = {
+ 0x18, 0x08, 0x24, 0x70, 0x70, 0x4F, 0xBF,
+ 0xC2, 0xB2, 0xB8, 0xBC, 0xAC, 0xCB, 0xCD,
+ 0xC3, 0x00, 0xA0, 0x00, 0xA4, 0x00, 0xDB
+};
+
+static const unsigned int s6e63m0_17_280[] = {
+ 0x18, 0x08, 0x24, 0x71, 0x71, 0x50, 0xBF,
+ 0xC2, 0xB2, 0xBA, 0xBE, 0xAE, 0xCB, 0xCD,
+ 0xC3, 0x00, 0x9C, 0x00, 0x9F, 0x00, 0xD6
+};
+
+static const unsigned int s6e63m0_17_260[] = {
+ 0x18, 0x08, 0x24, 0x72, 0x72, 0x50, 0xC0,
+ 0xC3, 0xB4, 0xB9, 0xBE, 0xAE, 0xCC, 0xCF,
+ 0xC4, 0x00, 0x97, 0x00, 0x9A, 0x00, 0xD1
+};
+
+static const unsigned int s6e63m0_17_240[] = {
+ 0x18, 0x08, 0x24, 0x71, 0x72, 0x4F, 0xC2,
+ 0xC4, 0xB5, 0xBB, 0xBF, 0xB0, 0xCC, 0xCF,
+ 0xC3, 0x00, 0x91, 0x00, 0x95, 0x00, 0xCA
+};
+
+static const unsigned int s6e63m0_17_220[] = {
+ 0x18, 0x08, 0x24, 0x71, 0x73, 0x4F, 0xC2,
+ 0xC5, 0xB5, 0xBD, 0xC0, 0xB2, 0xCD, 0xD1,
+ 0xC5, 0x00, 0x8B, 0x00, 0x8E, 0x00, 0xC2
+};
+
+static const unsigned int s6e63m0_17_200[] = {
+ 0x18, 0x08, 0x24, 0x72, 0x75, 0x51, 0xC2,
+ 0xC6, 0xB5, 0xBF, 0xC1, 0xB3, 0xCE, 0xD1,
+ 0xC6, 0x00, 0x85, 0x00, 0x88, 0x00, 0xBA
+};
+
+static const unsigned int s6e63m0_17_170[] = {
+ 0x18, 0x08, 0x24, 0x75, 0x77, 0x54, 0xC3,
+ 0xC7, 0xB7, 0xC0, 0xC3, 0xB4, 0xD1, 0xD3,
+ 0xC9, 0x00, 0x7B, 0x00, 0x7E, 0x00, 0xAB
+};
+
+static const unsigned int s6e63m0_17_140[] = {
+ 0x18, 0x08, 0x24, 0x7B, 0x77, 0x58, 0xC3,
+ 0xC8, 0xB8, 0xC2, 0xC6, 0xB6, 0xD3, 0xD4,
+ 0xCA, 0x00, 0x71, 0x00, 0x73, 0x00, 0x9E
+};
+
+static const unsigned int s6e63m0_17_110[] = {
+ 0x18, 0x08, 0x24, 0x81, 0x7B, 0x5D, 0xC6,
+ 0xCA, 0xBB, 0xC3, 0xC7, 0xB8, 0xD6, 0xD8,
+ 0xCD, 0x00, 0x65, 0x00, 0x67, 0x00, 0x8D
+};
+
+static const unsigned int s6e63m0_17_90[] = {
+ 0x18, 0x08, 0x24, 0x82, 0x7A, 0x5B, 0xC8,
+ 0xCB, 0xBD, 0xC5, 0xCA, 0xBA, 0xD6, 0xD8,
+ 0xCE, 0x00, 0x5D, 0x00, 0x5E, 0x00, 0x82
+};
+
+static const unsigned int s6e63m0_17_30[] = {
+ 0x18, 0x08, 0x24, 0x8F, 0x73, 0x63, 0xD1,
+ 0xD0, 0xC5, 0xCC, 0xD1, 0xC2, 0xDE, 0xE0,
+ 0xD6, 0x00, 0x39, 0x00, 0x36, 0x00, 0x51
+};
+
+struct s6e63m0_gamma {
+ unsigned int *gamma_22_table[MAX_GAMMA_LEVEL];
+ unsigned int *gamma_19_table[MAX_GAMMA_LEVEL];
+ unsigned int *gamma_17_table[MAX_GAMMA_LEVEL];
+};
+
+static struct s6e63m0_gamma gamma_table = {
+ .gamma_22_table[0] = (unsigned int *)&s6e63m0_22_30,
+ .gamma_22_table[1] = (unsigned int *)&s6e63m0_22_90,
+ .gamma_22_table[2] = (unsigned int *)&s6e63m0_22_110,
+ .gamma_22_table[3] = (unsigned int *)&s6e63m0_22_140,
+ .gamma_22_table[4] = (unsigned int *)&s6e63m0_22_170,
+ .gamma_22_table[5] = (unsigned int *)&s6e63m0_22_200,
+ .gamma_22_table[6] = (unsigned int *)&s6e63m0_22_220,
+ .gamma_22_table[7] = (unsigned int *)&s6e63m0_22_240,
+ .gamma_22_table[8] = (unsigned int *)&s6e63m0_22_260,
+ .gamma_22_table[9] = (unsigned int *)&s6e63m0_22_280,
+ .gamma_22_table[10] = (unsigned int *)&s6e63m0_22_300,
+
+ .gamma_19_table[0] = (unsigned int *)&s6e63m0_19_30,
+ .gamma_19_table[1] = (unsigned int *)&s6e63m0_19_90,
+ .gamma_19_table[2] = (unsigned int *)&s6e63m0_19_110,
+ .gamma_19_table[3] = (unsigned int *)&s6e63m0_19_140,
+ .gamma_19_table[4] = (unsigned int *)&s6e63m0_19_170,
+ .gamma_19_table[5] = (unsigned int *)&s6e63m0_19_200,
+ .gamma_19_table[6] = (unsigned int *)&s6e63m0_19_220,
+ .gamma_19_table[7] = (unsigned int *)&s6e63m0_19_240,
+ .gamma_19_table[8] = (unsigned int *)&s6e63m0_19_260,
+ .gamma_19_table[9] = (unsigned int *)&s6e63m0_19_280,
+ .gamma_19_table[10] = (unsigned int *)&s6e63m0_19_300,
+
+ .gamma_17_table[0] = (unsigned int *)&s6e63m0_17_30,
+ .gamma_17_table[1] = (unsigned int *)&s6e63m0_17_90,
+ .gamma_17_table[2] = (unsigned int *)&s6e63m0_17_110,
+ .gamma_17_table[3] = (unsigned int *)&s6e63m0_17_140,
+ .gamma_17_table[4] = (unsigned int *)&s6e63m0_17_170,
+ .gamma_17_table[5] = (unsigned int *)&s6e63m0_17_200,
+ .gamma_17_table[6] = (unsigned int *)&s6e63m0_17_220,
+ .gamma_17_table[7] = (unsigned int *)&s6e63m0_17_240,
+ .gamma_17_table[8] = (unsigned int *)&s6e63m0_17_260,
+ .gamma_17_table[9] = (unsigned int *)&s6e63m0_17_280,
+ .gamma_17_table[10] = (unsigned int *)&s6e63m0_17_300,
+};
+
+#endif
+
diff --git a/include/linux/i2c/adp8860.h b/include/linux/i2c/adp8860.h
new file mode 100644
index 00000000000..0b4d39855c9
--- /dev/null
+++ b/include/linux/i2c/adp8860.h
@@ -0,0 +1,154 @@
+/*
+ * Definitions and platform data for Analog Devices
+ * Backlight drivers ADP8860
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_I2C_ADP8860_H
+#define __LINUX_I2C_ADP8860_H
+
+#include <linux/leds.h>
+#include <linux/types.h>
+
+#define ID_ADP8860 8860
+
+#define ADP8860_MAX_BRIGHTNESS 0x7F
+#define FLAG_OFFT_SHIFT 8
+
+/*
+ * LEDs subdevice platform data
+ */
+
+#define ADP8860_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT)
+#define ADP8860_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT)
+#define ADP8860_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT)
+#define ADP8860_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT)
+
+#define ADP8860_LED_ONT_200ms 0
+#define ADP8860_LED_ONT_600ms 1
+#define ADP8860_LED_ONT_800ms 2
+#define ADP8860_LED_ONT_1200ms 3
+
+#define ADP8860_LED_D7 (7)
+#define ADP8860_LED_D6 (6)
+#define ADP8860_LED_D5 (5)
+#define ADP8860_LED_D4 (4)
+#define ADP8860_LED_D3 (3)
+#define ADP8860_LED_D2 (2)
+#define ADP8860_LED_D1 (1)
+
+/*
+ * Backlight subdevice platform data
+ */
+
+#define ADP8860_BL_D7 (1 << 6)
+#define ADP8860_BL_D6 (1 << 5)
+#define ADP8860_BL_D5 (1 << 4)
+#define ADP8860_BL_D4 (1 << 3)
+#define ADP8860_BL_D3 (1 << 2)
+#define ADP8860_BL_D2 (1 << 1)
+#define ADP8860_BL_D1 (1 << 0)
+
+#define ADP8860_FADE_T_DIS 0 /* Fade Timer Disabled */
+#define ADP8860_FADE_T_300ms 1 /* 0.3 Sec */
+#define ADP8860_FADE_T_600ms 2
+#define ADP8860_FADE_T_900ms 3
+#define ADP8860_FADE_T_1200ms 4
+#define ADP8860_FADE_T_1500ms 5
+#define ADP8860_FADE_T_1800ms 6
+#define ADP8860_FADE_T_2100ms 7
+#define ADP8860_FADE_T_2400ms 8
+#define ADP8860_FADE_T_2700ms 9
+#define ADP8860_FADE_T_3000ms 10
+#define ADP8860_FADE_T_3500ms 11
+#define ADP8860_FADE_T_4000ms 12
+#define ADP8860_FADE_T_4500ms 13
+#define ADP8860_FADE_T_5000ms 14
+#define ADP8860_FADE_T_5500ms 15 /* 5.5 Sec */
+
+#define ADP8860_FADE_LAW_LINEAR 0
+#define ADP8860_FADE_LAW_SQUARE 1
+#define ADP8860_FADE_LAW_CUBIC1 2
+#define ADP8860_FADE_LAW_CUBIC2 3
+
+#define ADP8860_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */
+#define ADP8860_BL_AMBL_FILT_160ms 1
+#define ADP8860_BL_AMBL_FILT_320ms 2
+#define ADP8860_BL_AMBL_FILT_640ms 3
+#define ADP8860_BL_AMBL_FILT_1280ms 4
+#define ADP8860_BL_AMBL_FILT_2560ms 5
+#define ADP8860_BL_AMBL_FILT_5120ms 6
+#define ADP8860_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */
+
+/*
+ * Blacklight current 0..30mA
+ */
+#define ADP8860_BL_CUR_mA(I) ((I * 127) / 30)
+
+/*
+ * L2 comparator current 0..1106uA
+ */
+#define ADP8860_L2_COMP_CURR_uA(I) ((I * 255) / 1106)
+
+/*
+ * L3 comparator current 0..138uA
+ */
+#define ADP8860_L3_COMP_CURR_uA(I) ((I * 255) / 138)
+
+struct adp8860_backlight_platform_data {
+ u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */
+
+ u8 bl_fade_in; /* Backlight Fade-In Timer */
+ u8 bl_fade_out; /* Backlight Fade-Out Timer */
+ u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */
+
+ u8 en_ambl_sens; /* 1 = enable ambient light sensor */
+ u8 abml_filt; /* Light sensor filter time */
+
+ u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+ u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+
+ /**
+ * Independent Current Sinks / LEDS
+ * Sinks not assigned to the Backlight can be exposed to
+ * user space using the LEDS CLASS interface
+ */
+
+ int num_leds;
+ struct led_info *leds;
+ u8 led_fade_in; /* LED Fade-In Timer */
+ u8 led_fade_out; /* LED Fade-Out Timer */
+ u8 led_fade_law; /* fade-on/fade-off transfer characteristic */
+ u8 led_on_time;
+
+ /**
+ * Gain down disable. Setting this option does not allow the
+ * charge pump to switch to lower gains. NOT AVAILABLE on ADP8860
+ * 1 = the charge pump doesn't switch down in gain until all LEDs are 0.
+ * The charge pump switches up in gain as needed. This feature is
+ * useful if the ADP8863 charge pump is used to drive an external load.
+ * This feature must be used when utilizing small fly capacitors
+ * (0402 or smaller).
+ * 0 = the charge pump automatically switches up and down in gain.
+ * This provides optimal efficiency, but is not suitable for driving
+ * loads that are not connected through the ADP8863 diode drivers.
+ * Additionally, the charge pump fly capacitors should be low ESR
+ * and sized 0603 or greater.
+ */
+
+ u8 gdwn_dis;
+};
+
+#endif /* __LINUX_I2C_ADP8860_H */
diff --git a/include/linux/lcd.h b/include/linux/lcd.h
index c67fecafff9..8877123f2d6 100644
--- a/include/linux/lcd.h
+++ b/include/linux/lcd.h
@@ -69,6 +69,29 @@ struct lcd_device {
struct device dev;
};
+struct lcd_platform_data {
+ /* reset lcd panel device. */
+ int (*reset)(struct lcd_device *ld);
+ /* on or off to lcd panel. if 'enable' is 0 then
+ lcd power off and 1, lcd power on. */
+ int (*power_on)(struct lcd_device *ld, int enable);
+
+ /* it indicates whether lcd panel was enabled
+ from bootloader or not. */
+ int lcd_enabled;
+ /* it means delay for stable time when it becomes low to high
+ or high to low that is dependent on whether reset gpio is
+ low active or high active. */
+ unsigned int reset_delay;
+ /* stable time needing to become lcd power on. */
+ unsigned int power_on_delay;
+ /* stable time needing to become lcd power off. */
+ unsigned int power_off_delay;
+
+ /* it could be used for any purpose. */
+ void *pdata;
+};
+
static inline void lcd_set_power(struct lcd_device *ld, int power)
{
mutex_lock(&ld->update_lock);
diff --git a/include/linux/mfd/pcf50633/backlight.h b/include/linux/mfd/pcf50633/backlight.h
new file mode 100644
index 00000000000..83747e217b2
--- /dev/null
+++ b/include/linux/mfd/pcf50633/backlight.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * PCF50633 backlight device driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_PCF50633_BACKLIGHT
+#define __LINUX_MFD_PCF50633_BACKLIGHT
+
+/*
+* @default_brightness: Backlight brightness is initialized to this value
+*
+* Brightness to be used after the driver has been probed.
+* Valid range 0-63.
+*
+* @default_brightness_limit: The actual brightness is limited by this value
+*
+* Brightness limit to be used after the driver has been probed. This is useful
+* when it is not known how much power is available for the backlight during
+* probe.
+* Valid range 0-63. Can be changed later with pcf50633_bl_set_brightness_limit.
+*
+* @ramp_time: Display ramp time when changing brightness
+*
+* When changing the backlights brightness the change is not instant, instead
+* it fades smooth from one state to another. This value specifies how long
+* the fade should take. The lower the value the higher the fade time.
+* Valid range 0-255
+*/
+struct pcf50633_bl_platform_data {
+ unsigned int default_brightness;
+ unsigned int default_brightness_limit;
+ uint8_t ramp_time;
+};
+
+
+struct pcf50633;
+
+int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit);
+
+#endif
+
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index 3398bd9aab1..ad411a78870 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -18,6 +18,7 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/power_supply.h>
+#include <linux/mfd/pcf50633/backlight.h>
struct pcf50633;
@@ -43,6 +44,8 @@ struct pcf50633_platform_data {
void (*force_shutdown)(struct pcf50633 *);
u8 resumers[5];
+
+ struct pcf50633_bl_platform_data *backlight_data;
};
struct pcf50633_irq {
@@ -152,6 +155,7 @@ struct pcf50633 {
struct platform_device *mbc_pdev;
struct platform_device *adc_pdev;
struct platform_device *input_pdev;
+ struct platform_device *bl_pdev;
struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS];
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 13:06:47 +0000