diff options
| -rw-r--r-- | Documentation/thinkpad-acpi.txt | 353 | ||||
| -rw-r--r-- | drivers/misc/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/misc/thinkpad_acpi.c | 602 | ||||
| -rw-r--r-- | drivers/misc/thinkpad_acpi.h | 42 | ||||
| -rw-r--r-- | include/linux/pci_ids.h | 2 |
5 files changed, 854 insertions, 159 deletions
diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index 9e6b94face4..6711fbcf408 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -1,11 +1,11 @@ ThinkPad ACPI Extras Driver - Version 0.14 - April 21st, 2007 + Version 0.15 + July 1st, 2007 Borislav Deianov <borislav@users.sf.net> - Henrique de Moraes Holschuh <hmh@hmh.eng.br> - http://ibm-acpi.sf.net/ + Henrique de Moraes Holschuh <hmh@hmh.eng.br> + http://ibm-acpi.sf.net/ This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It @@ -134,54 +134,68 @@ end of this document. Changes to the sysfs interface done by the kernel subsystems are not documented here, nor are they tracked by this attribute. +Changes to the thinkpad-acpi sysfs interface are only considered +non-experimental when they are submitted to Linux mainline, at which +point the changes in this interface are documented and interface_version +may be updated. If you are using any thinkpad-acpi features not yet +sent to mainline for merging, you do so on your own risk: these features +may disappear, or be implemented in a different and incompatible way by +the time they are merged in Linux mainline. + +Changes that are backwards-compatible by nature (e.g. the addition of +attributes that do not change the way the other attributes work) do not +always warrant an update of interface_version. Therefore, one must +expect that an attribute might not be there, and deal with it properly +(an attribute not being there *is* a valid way to make it clear that a +feature is not available in sysfs). + Hot keys -------- procfs: /proc/acpi/ibm/hotkey sysfs device attribute: hotkey_* -Without this driver, only the Fn-F4 key (sleep button) generates an -ACPI event. With the driver loaded, the hotkey feature enabled and the -mask set (see below), the various hot keys generate ACPI events in the +In a ThinkPad, the ACPI HKEY handler is responsible for comunicating +some important events and also keyboard hot key presses to the operating +system. Enabling the hotkey functionality of thinkpad-acpi signals the +firmware that such a driver is present, and modifies how the ThinkPad +firmware will behave in many situations. + +When the hotkey feature is enabled and the hot key mask is set (see +below), the various hot keys either generate ACPI events in the following format: ibm/hotkey HKEY 00000080 0000xxxx -The last four digits vary depending on the key combination pressed. -All labeled Fn-Fx key combinations generate distinct events. In -addition, the lid microswitch and some docking station buttons may -also generate such events. - -The bit mask allows some control over which hot keys generate ACPI -events. Not all bits in the mask can be modified. Not all bits that -can be modified do anything. Not all hot keys can be individually -controlled by the mask. Most recent ThinkPad models honor the -following bits (assuming the hot keys feature has been enabled): - - key bit behavior when set behavior when unset - - Fn-F3 always generates ACPI event - Fn-F4 always generates ACPI event - Fn-F5 0010 generate ACPI event enable/disable Bluetooth - Fn-F7 0040 generate ACPI event switch LCD and external display - Fn-F8 0080 generate ACPI event expand screen or none - Fn-F9 0100 generate ACPI event none - Fn-F12 always generates ACPI event - -Some models do not support all of the above. For example, the T30 does -not support Fn-F5 and Fn-F9. Other models do not support the mask at -all. On those models, hot keys cannot be controlled individually. - -Note that enabling ACPI events for some keys prevents their default -behavior. For example, if events for Fn-F5 are enabled, that key will -no longer enable/disable Bluetooth by itself. This can still be done -from an acpid handler for the ibm/hotkey event. - -Note also that not all Fn key combinations are supported through -ACPI. For example, on the X40, the brightness, volume and "Access IBM" -buttons do not generate ACPI events even with this driver. They *can* -be used through the "ThinkPad Buttons" utility, see -http://www.nongnu.org/tpb/ +or events over the input layer. The input layer support accepts the +standard IOCTLs to remap the keycodes assigned to each hotkey. + +When the input device is open, the driver will suppress any ACPI hot key +events that get translated into a meaningful input layer event, in order +to avoid sending duplicate events to userspace. Hot keys that are +mapped to KEY_RESERVED in the keymap are not translated, and will always +generate an ACPI ibm/hotkey HKEY event, and no input layer events. + +The hot key bit mask allows some control over which hot keys generate +events. If a key is "masked" (bit set to 0 in the mask), the firmware +will handle it. If it is "unmasked", it signals the firmware that +thinkpad-acpi would prefer to handle it, if the firmware would be so +kind to allow it (and it often doesn't!). + +Not all bits in the mask can be modified. Not all bits that can be +modified do anything. Not all hot keys can be individually controlled +by the mask. Some models do not support the mask at all, and in those +models, hot keys cannot be controlled individually. The behaviour of +the mask is, therefore, higly dependent on the ThinkPad model. + +Note that unmasking some keys prevents their default behavior. For +example, if Fn+F5 is unmasked, that key will no longer enable/disable +Bluetooth by itself. + +Note also that not all Fn key combinations are supported through ACPI. +For example, on the X40, the brightness, volume and "Access IBM" buttons +do not generate ACPI events even with this driver. They *can* be used +through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/ procfs notes: @@ -189,9 +203,9 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file: echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature - echo 0xffff > /proc/acpi/ibm/hotkey -- enable all possible hot keys - echo 0x0000 > /proc/acpi/ibm/hotkey -- disable all possible hot keys - ... any other 4-hex-digit mask ... + echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys + echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys + ... any other 8-hex-digit mask ... echo reset > /proc/acpi/ibm/hotkey -- restore the original mask sysfs notes: @@ -202,7 +216,7 @@ sysfs notes: key feature status will be restored to this value. 0: hot keys were disabled - 1: hot keys were enabled + 1: hot keys were enabled (unusual) hotkey_bios_mask: Returns the hot keys mask when thinkpad-acpi was loaded. @@ -217,9 +231,182 @@ sysfs notes: 1: enables the hot keys feature / feature enabled hotkey_mask: - bit mask to enable ACPI event generation for each hot - key (see above). Returns the current status of the hot - keys mask, and allows one to modify it. + bit mask to enable driver-handling and ACPI event + generation for each hot key (see above). Returns the + current status of the hot keys mask, and allows one to + modify it. + + hotkey_all_mask: + bit mask that should enable event reporting for all + supported hot keys, when echoed to hotkey_mask above. + Unless you know which events need to be handled + passively (because the firmware *will* handle them + anyway), do *not* use hotkey_all_mask. Use + hotkey_recommended_mask, instead. You have been warned. + + hotkey_recommended_mask: + bit mask that should enable event reporting for all + supported hot keys, except those which are always + handled by the firmware anyway. Echo it to + hotkey_mask above, to use. + + hotkey_radio_sw: + if the ThinkPad has a hardware radio switch, this + attribute will read 0 if the switch is in the "radios + disabled" postition, and 1 if the switch is in the + "radios enabled" position. + +input layer notes: + +A Hot key is mapped to a single input layer EV_KEY event, possibly +followed by an EV_MSC MSC_SCAN event that shall contain that key's scan +code. An EV_SYN event will always be generated to mark the end of the +event block. + +Do not use the EV_MSC MSC_SCAN events to process keys. They are to be +used as a helper to remap keys, only. They are particularly useful when +remapping KEY_UNKNOWN keys. + +The events are available in an input device, with the following id: + + Bus: BUS_HOST + vendor: 0x1014 (PCI_VENDOR_ID_IBM) or + 0x17aa (PCI_VENDOR_ID_LENOVO) + product: 0x5054 ("TP") + version: 0x4101 + +The version will have its LSB incremented if the keymap changes in a +backwards-compatible way. The MSB shall always be 0x41 for this input +device. If the MSB is not 0x41, do not use the device as described in +this section, as it is either something else (e.g. another input device +exported by a thinkpad driver, such as HDAPS) or its functionality has +been changed in a non-backwards compatible way. + +Adding other event types for other functionalities shall be considered a +backwards-compatible change for this input device. + +Thinkpad-acpi Hot Key event map (version 0x4101): + +ACPI Scan +event code Key Notes + +0x1001 0x00 FN+F1 - +0x1002 0x01 FN+F2 IBM: battery (rare) + Lenovo: Screen lock + +0x1003 0x02 FN+F3 Many IBM models always report + this hot key, even with hot keys + disabled or with Fn+F3 masked + off + IBM: screen lock + Lenovo: battery + +0x1004 0x03 FN+F4 Sleep button (ACPI sleep button + semanthics, i.e. sleep-to-RAM). + It is always generate some kind + of event, either the hot key + event or a ACPI sleep button + event. The firmware may + refuse to generate further FN+F4 + key presses until a S3 or S4 ACPI + sleep cycle is performed or some + time passes. + +0x1005 0x04 FN+F5 Radio. Enables/disables + the internal BlueTooth hardware + and W-WAN card if left in control + of the firmware. Does not affect + the WLAN card. + Should be used to turn on/off all + radios (bluetooth+W-WAN+WLAN), + really. + +0x1006 0x05 FN+F6 - + +0x1007 0x06 FN+F7 Video output cycle. + Do you feel lucky today? + +0x1008 0x07 FN+F8 IBM: toggle screen expand + Lenovo: configure ultranav + +0x1009 0x08 FN+F9 - + .. .. .. +0x100B 0x0A FN+F11 - + +0x100C 0x0B FN+F12 Sleep to disk. You are always + supposed to handle it yourself, + either through the ACPI event, + or through a hotkey event. + The firmware may refuse to + generate further FN+F4 key + press events until a S3 or S4 + ACPI sleep cycle is performed, + or some time passes. + +0x100D 0x0C FN+BACKSPACE - +0x100E 0x0D FN+INSERT - +0x100F 0x0E FN+DELETE - + +0x1010 0x0F FN+HOME Brightness up. This key is + always handled by the firmware + in IBM ThinkPads, even when + unmasked. Just leave it alone. + For Lenovo ThinkPads with a new + BIOS, it has to be handled either + by the ACPI OSI, or by userspace. +0x1011 0x10 FN+END Brightness down. See brightness + up for details. + +0x1012 0x11 FN+PGUP Thinklight toggle. This key is + always handled by the firmware, + even when unmasked. + +0x1013 0x12 FN+PGDOWN - + +0x1014 0x13 FN+SPACE Zoom key + +0x1015 0x14 VOLUME UP Internal mixer volume up. This + key is always handled by the + firmware, even when unmasked. + NOTE: Lenovo seems to be changing + this. +0x1016 0x15 VOLUME DOWN Internal mixer volume up. This + key is always handled by the + firmware, even when unmasked. + NOTE: Lenovo seems to be changing + this. +0x1017 0x16 MUTE Mute internal mixer. This + key is always handled by the + firmware, even when unmasked. + +0x1018 0x17 THINKPAD Thinkpad/Access IBM/Lenovo key + +0x1019 0x18 unknown +.. .. .. +0x1020 0x1F unknown + +The ThinkPad firmware does not allow one to differentiate when most hot +keys are pressed or released (either that, or we don't know how to, yet). +For these keys, the driver generates a set of events for a key press and +immediately issues the same set of events for a key release. It is +unknown by the driver if the ThinkPad firmware triggered these events on +hot key press or release, but the firmware will do it for either one, not +both. + +If a key is mapped to KEY_RESERVED, it generates no input events at all, +and it may generate a legacy thinkpad-acpi ACPI hotkey event. + +If a key is mapped to KEY_UNKNOWN, it generates an input event that +includes an scan code, and it may also generate a legacy thinkpad-acpi +ACPI hotkey event. + +If a key is mapped to anything else, it will only generate legacy +thinkpad-acpi ACPI hotkey events if nobody has opened the input device. + +Non hot-key ACPI HKEY event map: +0x5001 Lid closed +0x5002 Lid opened +0x7000 Radio Switch may have changed state Bluetooth @@ -437,27 +624,34 @@ CMOS control procfs: /proc/acpi/ibm/cmos sysfs device attribute: cmos_command -This feature is used internally by the ACPI firmware to control the -ThinkLight on most newer ThinkPad models. It may also control LCD -brightness, sounds volume and more, but only on some models. +This feature is mostly used internally by the ACPI firmware to keep the legacy +CMOS NVRAM bits in sync with the current machine state, and to record this +state so that the ThinkPad will retain such settings across reboots. + +Some of these commands actually perform actions in some ThinkPad models, but +this is expected to disappear more and more in newer models. As an example, in +a T43 and in a X40, commands 12 and 13 still control the ThinkLight state for +real, but commands 0 to 2 don't control the mixer anymore (they have been +phased out) and just update the NVRAM. The range of valid cmos command numbers is 0 to 21, but not all have an effect and the behavior varies from model to model. Here is the behavior on the X40 (tpb is the ThinkPad Buttons utility): - 0 - no effect but tpb reports "Volume down" - 1 - no effect but tpb reports "Volume up" - 2 - no effect but tpb reports "Mute on" - 3 - simulate pressing the "Access IBM" button - 4 - LCD brightness up - 5 - LCD brightness down - 11 - toggle screen expansion - 12 - ThinkLight on - 13 - ThinkLight off - 14 - no effect but tpb reports ThinkLight status change + 0 - Related to "Volume down" key press + 1 - Related to "Volume up" key press + 2 - Related to "Mute on" key press + 3 - Related to "Access IBM" key press + 4 - Related to "LCD brightness up" key pess + 5 - Related to "LCD brightness down" key press + 11 - Related to "toggle screen expansion" key press/function + 12 - Related to "ThinkLight on" + 13 - Related to "ThinkLight off" + 14 - Related to "ThinkLight" key press (toggle thinklight) The cmos command interface is prone to firmware split-brain problems, as -in newer ThinkPads it is just a compatibility layer. +in newer ThinkPads it is just a compatibility layer. Do not use it, it is +exported just as a debug tool. LED control -- /proc/acpi/ibm/led --------------------------------- @@ -516,23 +710,15 @@ Temperature sensors procfs: /proc/acpi/ibm/thermal sysfs device attributes: (hwmon) temp*_input -Most ThinkPads include six or more separate temperature sensors but -only expose the CPU temperature through the standard ACPI methods. -This feature shows readings from up to eight different sensors on older -ThinkPads, and it has experimental support for up to sixteen different -sensors on newer ThinkPads. - -EXPERIMENTAL: The 16-sensors feature is marked EXPERIMENTAL because the -implementation directly accesses hardware registers and may not work as -expected. USE WITH CAUTION! To use this feature, you need to supply the -experimental=1 parameter when loading the module. When EXPERIMENTAL -mode is enabled, reading the first 8 sensors on newer ThinkPads will -also use an new experimental thermal sensor access mode. +Most ThinkPads include six or more separate temperature sensors but only +expose the CPU temperature through the standard ACPI methods. This +feature shows readings from up to eight different sensors on older +ThinkPads, and up to sixteen different sensors on newer ThinkPads. For example, on the X40, a typical output may be: temperatures: 42 42 45 41 36 -128 33 -128 -EXPERIMENTAL: On the T43/p, a typical output may be: +On the T43/p, a typical output may be: temperatures: 48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128 The mapping of thermal sensors to physical locations varies depending on @@ -562,7 +748,8 @@ http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p 2: System board, left side (near PCMCIA slot), reported as HDAPS temp 3: PCMCIA slot 9: MCH (northbridge) to DRAM Bus -10: ICH (southbridge), under Mini-PCI card, under touchpad +10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI + card, under touchpad 11: Power regulator, underside of system board, below F2 key The A31 has a very atypical layout for the thermal sensors @@ -681,6 +868,12 @@ cannot be controlled. The backlight control has eight levels, ranging from 0 to 7. Some of the levels may not be distinct. +There are two interfaces to the firmware for brightness control, EC and CMOS. +To select which one should be used, use the brightness_mode module parameter: +brightness_mode=1 selects EC mode, brightness_mode=2 selects CMOS mode, +brightness_mode=3 selects both EC and CMOS. The driver tries to autodetect +which interface to use. + Procfs notes: The available commands are: @@ -976,3 +1169,9 @@ Sysfs interface changelog: 0x000100: Initial sysfs support, as a single platform driver and device. +0x000200: Hot key support for 32 hot keys, and radio slider switch + support. +0x010000: Hot keys are now handled by default over the input + layer, the radio switch generates input event EV_RADIO, + and the driver enables hot key handling by default in + the firmware. diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 1d516f24ba5..aaaa61ea421 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -150,6 +150,7 @@ config THINKPAD_ACPI depends on X86 && ACPI select BACKLIGHT_CLASS_DEVICE select HWMON + select NVRAM ---help--- This is a driver for the IBM and Lenovo ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth control, video @@ -196,4 +197,17 @@ config THINKPAD_ACPI_BAY If you are not sure, say Y here. +config THINKPAD_ACPI_INPUT_ENABLED + bool "Enable input layer support by default" + depends on THINKPAD_ACPI + default y + ---help--- + Enables hot key handling over the input layer by default. If unset, + the driver does not enable any hot key handling by default, and also + starts up with a mostly empty keymap. + + If you are not sure, say Y here. Say N to retain the deprecated + behavior of ibm-acpi, and thinkpad-acpi for kernels up to 2.6.21. + + endif # MISC_DEVICES diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 95c0b96e83f..f15a58f7403 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -21,8 +21,8 @@ * 02110-1301, USA. */ -#define IBM_VERSION "0.14" -#define TPACPI_SYSFS_VERSION 0x000100 +#define IBM_VERSION "0.15" +#define TPACPI_SYSFS_VERSION 0x010000 /* * Changelog: @@ -92,6 +92,29 @@ MODULE_LICENSE("GPL"); /* Please remove this in year 2009 */ MODULE_ALIAS("ibm_acpi"); +/* + * DMI matching for module autoloading + * + * See http://thinkwiki.org/wiki/List_of_DMI_IDs + * See http://thinkwiki.org/wiki/BIOS_Upgrade_Downloads + * + * Only models listed in thinkwiki will be supported, so add yours + * if it is not there yet. + */ +#define IBM_BIOS_MODULE_ALIAS(__type) \ + MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW") + +/* Non-ancient thinkpads */ +MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*"); +MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*"); + +/* Ancient thinkpad BIOSes have to be identified by + * BIOS type or model number, and there are far less + * BIOS types than model numbers... */ +IBM_BIOS_MODULE_ALIAS("I[B,D,H,I,M,N,O,T,W,V,Y,Z]"); +IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]"); +IBM_BIOS_MODULE_ALIAS("K[U,X-Z]"); + #define __unused __attribute__ ((unused)) /**************************************************************************** @@ -106,7 +129,7 @@ MODULE_ALIAS("ibm_acpi"); * ACPI basic handles */ -static acpi_handle root_handle = NULL; +static acpi_handle root_handle; #define IBM_HANDLE(object, parent, paths...) \ static acpi_handle object##_handle; \ @@ -487,19 +510,36 @@ static char *next_cmd(char **cmds) /**************************************************************************** **************************************************************************** * - * Device model: hwmon and platform + * Device model: input, hwmon and platform * **************************************************************************** ****************************************************************************/ -static struct platform_device *tpacpi_pdev = NULL; -static struct class_device *tpacpi_hwmon = NULL; +static struct platform_device *tpacpi_pdev; +static struct class_device *tpacpi_hwmon; +static struct input_dev *tpacpi_inputdev; + + +static int tpacpi_resume_handler(struct platform_device *pdev) +{ + struct ibm_struct *ibm, *itmp; + + list_for_each_entry_safe(ibm, itmp, + &tpacpi_all_drivers, + all_drivers) { + if (ibm->resume) + (ibm->resume)(); + } + + return 0; +} static struct platform_driver tpacpi_pdriver = { .driver = { .name = IBM_DRVR_NAME, .owner = THIS_MODULE, }, + .resume = tpacpi_resume_handler, }; @@ -677,9 +717,19 @@ static int __init thinkpad_acpi_driver_init(struct ibm_init_struct *iibm) printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION); printk(IBM_INFO "%s\n", IBM_URL); - if (ibm_thinkpad_ec_found) - printk(IBM_INFO "ThinkPad EC firmware %s\n", - ibm_thinkpad_ec_found); + printk(IBM_INFO "ThinkPad BIOS %s, EC %s\n", + (thinkpad_id.bios_version_str) ? + thinkpad_id.bios_version_str : "unknown", + (thinkpad_id.ec_version_str) ? + thinkpad_id.ec_version_str : "unknown"); + + if (thinkpad_id.vendor && thinkpad_id.model_str) + printk(IBM_INFO "%s %s\n", + (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) ? + "IBM" : ((thinkpad_id.vendor == + PCI_VENDOR_ID_LENOVO) ? + "Lenovo" : "Unknown vendor"), + thinkpad_id.model_str); return 0; } @@ -704,16 +754,28 @@ static struct ibm_struct thinkpad_acpi_driver_data = { */ static int hotkey_orig_status; -static int hotkey_orig_mask; +static u32 hotkey_orig_mask; +static u32 hotkey_all_mask; +static u32 hotkey_reserved_mask; + +static u16 *hotkey_keycode_map; -static struct attribute_set *hotkey_dev_attributes = NULL; +static struct attribute_set *hotkey_dev_attributes; + +static int hotkey_get_wlsw(int *status) +{ + if (!acpi_evalf(hkey_handle, status, "WLSW", "d")) + return -EIO; + return 0; +} /* sysfs hotkey enable ------------------------------------------------- */ static ssize_t hotkey_enable_show(struct device *dev, struct device_attribute *attr, char *buf) { - int res, status, mask; + int res, status; + u32 mask; res = hotkey_get(&status, &mask); if (res) @@ -727,7 +789,8 @@ static ssize_t hotkey_enable_store(struct device *dev, const char *buf, size_t count) { unsigned long t; - int res, status, mask; + int res, status; + u32 mask; if (parse_strtoul(buf, 1, &t)) return -EINVAL; @@ -748,13 +811,14 @@ static ssize_t hotkey_mask_show(struct device *dev, struct device_attribute *attr, char *buf) { - int res, status, mask; + int res, status; + u32 mask; res = hotkey_get(&status, &mask); if (res) return res; - return snprintf(buf, PAGE_SIZE, "0x%04x\n", mask); + return snprintf(buf, PAGE_SIZE, "0x%08x\n", mask); } static ssize_t hotkey_mask_store(struct device *dev, @@ -762,9 +826,10 @@ static ssize_t hotkey_mask_store(struct device *dev, const char *buf, size_t count) { unsigned long t; - int res, status, mask; + int res, status; + u32 mask; - if (parse_strtoul(buf, 0xffff, &t)) + if (parse_strtoul(buf, 0xffffffffUL, &t)) return -EINVAL; res = hotkey_get(&status, &mask); @@ -794,26 +859,123 @@ static ssize_t hotkey_bios_mask_show(struct device *dev, struct device_attribute *attr, char *buf) { - return snprintf(buf, PAGE_SIZE, "0x%04x\n", hotkey_orig_mask); + return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_orig_mask); } static struct device_attribute dev_attr_hotkey_bios_mask = __ATTR(hotkey_bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL); +/* sysfs hotkey all_mask ----------------------------------------------- */ +static ssize_t hotkey_all_mask_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_all_mask); +} + +static struct device_attribute dev_attr_hotkey_all_mask = + __ATTR(hotkey_all_mask, S_IRUGO, hotkey_all_mask_show, NULL); + +/* sysfs hotkey recommended_mask --------------------------------------- */ +static ssize_t hotkey_recommended_mask_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "0x%08x\n", + hotkey_all_mask & ~hotkey_reserved_mask); +} + +static struct device_attribute dev_attr_hotkey_recommended_mask = + __ATTR(hotkey_recommended_mask, S_IRUGO, + hotkey_recommended_mask_show, NULL); + +/* sysfs hotkey radio_sw ----------------------------------------------- */ +static ssize_t hotkey_radio_sw_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int res, s; + res = hotkey_get_wlsw(&s); + if (res < 0) + return res; + + return snprintf(buf, PAGE_SIZE, "%d\n", !!s); +} + +static struct device_attribute dev_attr_hotkey_radio_sw = + __ATTR(hotkey_radio_sw, S_IRUGO, hotkey_radio_sw_show, NULL); + /* --------------------------------------------------------------------- */ static struct attribute *hotkey_mask_attributes[] = { &dev_attr_hotkey_mask.attr, &dev_attr_hotkey_bios_enabled.attr, &dev_attr_hotkey_bios_mask.attr, + &dev_attr_hotkey_all_mask.attr, + &dev_attr_hotkey_recommended_mask.attr, }; static int __init hotkey_init(struct ibm_init_struct *iibm) { - int res; + + static u16 ibm_keycode_map[] __initdata = { + /* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */ + KEY_FN_F1, KEY_FN_F2, KEY_COFFEE, KEY_SLEEP, + KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8, + KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND, + /* Scan codes 0x0C to 0x0F: Other ACPI HKEY hot keys */ + KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */ + KEY_UNKNOWN, /* 0x0D: FN+INSERT */ + KEY_UNKNOWN, /* 0x0E: FN+DELETE */ + KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */ + /* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */ + KEY_RESERVED, /* 0x10: FN+END (brightness down) */ + KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ + KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ + KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ + KEY_RESERVED, /* 0x14: VOLUME UP */ + KEY_RESERVED, /* 0x15: VOLUME DOWN */ + KEY_RESERVED, /* 0x16: MUTE */ + KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */ + /* (assignments unknown, please report if found) */ + KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, + KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, + }; + static u16 lenovo_keycode_map[] __initdata = { + /* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */ + KEY_FN_F1, KEY_COFFEE, KEY_BATTERY, KEY_SLEEP, + KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8, + KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND, + /* Scan codes 0x0C to 0x0F: Other ACPI HKEY hot keys */ + KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */ + KEY_UNKNOWN, /* 0x0D: FN+INSERT */ + KEY_UNKNOWN, /* 0x0E: FN+DELETE */ + KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */ + /* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */ + KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */ + KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ + KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ + KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ + KEY_RESERVED, /* 0x14: VOLUME UP */ + KEY_RESERVED, /* 0x15: VOLUME DOWN */ + KEY_RESERVED, /* 0x16: MUTE */ + KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */ + /* (assignments unknown, please report if found) */ + KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, + KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, + }; + +#define TPACPI_HOTKEY_MAP_LEN ARRAY_SIZE(ibm_keycode_map) +#define TPACPI_HOTKEY_MAP_SIZE sizeof(ibm_keycode_map) +#define TPACPI_HOTKEY_MAP_TYPESIZE sizeof(ibm_keycode_map[0]) + + int res, i; + int status; vdbg_printk(TPACPI_DBG_INIT, "initializing hotkey subdriver\n"); + BUG_ON(!tpacpi_inputdev); + IBM_ACPIHANDLE_INIT(hkey); mutex_init(&hotkey_mutex); @@ -824,7 +986,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) str_supported(tp_features.hotkey)); if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(4, NULL); + hotkey_dev_attributes = create_attr_set(7, NULL); if (!hotkey_dev_attributes) return -ENOMEM; res = add_to_attr_set(hotkey_dev_attributes, @@ -840,19 +1002,92 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n", str_supported(tp_features.hotkey_mask)); + if (tp_features.hotkey_mask) { + /* MHKA available in A31, R40, R40e, T4x, X31, and later */ + if (!acpi_evalf(hkey_handle, &hotkey_all_mask, + "MHKA", "qd")) + hotkey_all_mask = 0x080cU; /* FN+F12, FN+F4, FN+F3 */ + } + res = hotkey_get(&hotkey_orig_status, &hotkey_orig_mask); if (!res && tp_features.hotkey_mask) { res = add_many_to_attr_set(hotkey_dev_attributes, hotkey_mask_attributes, ARRAY_SIZE(hotkey_mask_attributes)); } + + /* Not all thinkpads have a hardware radio switch */ + if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) { + tp_features.hotkey_wlsw = 1; + printk(IBM_INFO + "radio switch found; radios are %s\n", + enabled(status, 0)); + res = add_to_attr_set(hotkey_dev_attributes, + &dev_attr_hotkey_radio_sw.attr); + } + if (!res) res = register_attr_set_with_sysfs( hotkey_dev_attributes, &tpacpi_pdev->dev.kobj); + if (res) + return res; + + /* Set up key map */ + + hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE, + GFP_KERNEL); + if (!hotkey_keycode_map) { + printk(IBM_ERR "failed to allocate memory for key map\n"); + return -ENOMEM; + } + + if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { + dbg_printk(TPACPI_DBG_INIT, + "using Lenovo default hot key map\n"); + memcpy(hotkey_keycode_map, &lenovo_keycode_map, + TPACPI_HOTKEY_MAP_SIZE); + } else { + dbg_printk(TPACPI_DBG_INIT, + "using IBM default hot key map\n"); + memcpy(hotkey_keycode_map, &ibm_keycode_map, + TPACPI_HOTKEY_MAP_SIZE); + } +#ifndef CONFIG_THINKPAD_ACPI_INPUT_ENABLED + for (i = 0; i < 12; i++) + hotkey_keycode_map[i] = KEY_UNKNOWN; +#endif /* ! CONFIG_THINKPAD_ACPI_INPUT_ENABLED */ + + set_bit(EV_KEY, tpacpi_inputdev->evbit); + set_bit(EV_MSC, tpacpi_inputdev->evbit); + set_bit(MSC_SCAN, tpacpi_inputdev->mscbit); + tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE; + tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN; + tpacpi_inputdev->keycode = hotkey_keycode_map; + for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) { + if (hotkey_keycode_map[i] != KEY_RESERVED) { + set_bit(hotkey_keycode_map[i], + tpacpi_inputdev->keybit); + } else { + if (i < sizeof(hotkey_reserved_mask)*8) + hotkey_reserved_mask |= 1 << i; + } + } + + if (tp_features.hotkey_wlsw) { + set_bit(EV_SW, tpacpi_inputdev->evbit); + set_bit(SW_RADIO, tpacpi_inputdev->swbit); + } + +#ifdef CONFIG_THINKPAD_ACPI_INPUT_ENABLED + dbg_printk(TPACPI_DBG_INIT, + "enabling hot key handling\n"); + res = hotkey_set(1, (hotkey_all_mask & ~hotkey_reserved_mask) + | hotkey_orig_mask); if (res) return res; +#endif /* CONFIG_THINKPAD_ACPI_INPUT_ENABLED */ } return (tp_features.hotkey)? 0 : 1; @@ -875,22 +1110,101 @@ static void hotkey_exit(void) } } +static void tpacpi_input_send_key(unsigned int scancode, + unsigned int keycode) +{ + if (keycode != KEY_RESERVED) { + input_report_key(tpacpi_inputdev, keycode, 1); + if (keycode == KEY_UNKNOWN) + input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, + scancode); + input_sync(tpacpi_inputdev); + + input_report_key(tpacpi_inputdev, keycode, 0); + if (keycode == KEY_UNKNOWN) + input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, + scancode); + input_sync(tpacpi_inputdev); + } +} + +static void tpacpi_input_send_radiosw(void) +{ + int wlsw; + + if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) + input_report_switch(tpacpi_inputdev, + SW_RADIO, !!wlsw); +} + static void hotkey_notify(struct ibm_struct *ibm, u32 event) { - int hkey; + u32 hkey; + unsigned int keycode, scancode; + int sendacpi = 1; + + if (event == 0x80 && acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) { + if (tpacpi_inputdev->users > 0) { + switch (hkey >> 12) { + case 1: + /* 0x1000-0x1FFF: key presses */ + scancode = hkey & 0xfff; + if (scancode > 0 && scancode < 0x21) { + scancode--; + keycode = hotkey_keycode_map[scancode]; + tpacpi_input_send_key(scancode, keycode); + sendacpi = (keycode == KEY_RESERVED + || keycode == KEY_UNKNOWN); + } else { + printk(IBM_ERR + "hotkey 0x%04x out of range for keyboard map\n", + hkey); + } + break; + case 5: + /* 0x5000-0x5FFF: LID */ + /* we don't handle it through this path, just + * eat up known LID events */ + if (hkey != 0x5001 && hkey != 0x5002) { + printk(IBM_ERR + "unknown LID-related hotkey event: 0x%04x\n", + hkey); + } + break; + case 7: + /* 0x7000-0x7FFF: misc */ + if (tp_features.hotkey_wlsw && hkey == 0x7000) { + tpacpi_input_send_radiosw(); + sendacpi = 0; + break; + } + /* fallthrough to default */ + default: + /* case 2: dock-related */ + /* 0x2305 - T43 waking up due to bay lever eject while aslept */ + /* case 3: ultra-bay related. maybe bay in dock? */ + /* 0x3003 - T43 after wake up by bay lever eject (0x2305) */ + printk(IBM_NOTICE "unhandled hotkey event 0x%04x\n", hkey); + } + } - if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) - acpi_bus_generate_event(ibm->acpi->device, event, hkey); - else { - printk(IBM_ERR "unknown hotkey event %d\n", event); + if (sendacpi) + acpi_bus_generate_event(ibm->acpi->device, event, hkey); + } else { + printk(IBM_ERR "unknown hotkey notification event %d\n", event); acpi_bus_generate_event(ibm->acpi->device, event, 0); } } +static void hotkey_resume(void) +{ + tpacpi_input_send_radiosw(); +} + /* * Call with hotkey_mutex held */ -static int hotkey_get(int *status, int *mask) +static int hotkey_get(int *status, u32 *mask) { if (!acpi_evalf(hkey_handle, status, "DHKC", "d")) return -EIO; @@ -905,7 +1219,7 @@ static int hotkey_get(int *status, int *mask) /* * Call with hotkey_mutex held */ -static int hotkey_set(int status, int mask) +static int hotkey_set(int status, u32 mask) { int i; @@ -926,7 +1240,8 @@ static int hotkey_set(int status, int mask) /* procfs -------------------------------------------------------------- */ static int hotkey_read(char *p) { - int res, status, mask; + int res, status; + u32 mask; int len = 0; if (!tp_features.hotkey) { @@ -944,7 +1259,7 @@ static int hotkey_read(char *p) len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0)); if (tp_features.hotkey_mask) { - len += sprintf(p + len, "mask:\t\t0x%04x\n", mask); + len += sprintf(p + len, "mask:\t\t0x%08x\n", mask); len += sprintf(p + len, "commands:\tenable, disable, reset, <mask>\n"); } else { @@ -957,7 +1272,8 @@ static int hotkey_read(char *p) static int hotkey_write(char *buf) { - int res, status, mask; + int res, status; + u32 mask; char *cmd; int do_cmd = 0; @@ -1012,6 +1328,7 @@ static struct ibm_struct hotkey_driver_data = { .read = hotkey_read, .write = hotkey_write, .exit = hotkey_exit, + .resume = hotkey_resume, .acpi = &ibm_hotkey_acpidriver, }; @@ -1770,7 +2087,10 @@ static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = { .type = ACPI_SYSTEM_NOTIFY, }, { - .hid = IBM_PCI_HID, + /* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING. + * We just use it to get notifications of dock hotplug + * in very old thinkpads */ + .hid = PCI_ROOT_HID_STRING, .notify = dock_notify, .handle = &pci_handle, .type = ACPI_SYSTEM_NOTIFY, @@ -1829,7 +2149,7 @@ static int __init dock_init2(struct ibm_init_struct *iibm) static void dock_notify(struct ibm_struct *ibm, u32 event) { int docked = dock_docked(); - int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, IBM_PCI_HID); + int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, PCI_ROOT_HID_STRING); if (event == 1 && !pci) /* 570 */ acpi_bus_generate_event(ibm->acpi->device, event, 1); /* button */ @@ -2389,7 +2709,7 @@ static int __init thermal_init(struct ibm_init_struct *iibm) acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv"); - if (ibm_thinkpad_ec_found && experimental) { + if (thinkpad_id.ec_model) { /* * Direct EC access mode: sensors at registers * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for @@ -2533,6 +2853,8 @@ static int thermal_get_sensor(int idx, s32 *value) snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx); if (!acpi_evalf(ec_handle, &t, tmpi, "d")) return -EIO; + if (t > 127 || t < -127) + t = TP_EC_THERMAL_TMP_NA; *value = t * 1000; return 0; } @@ -2671,22 +2993,39 @@ static struct ibm_struct ecdump_driver_data = { * Backlight/brightness subdriver */ -static struct backlight_device *ibm_backlight_device = NULL; +static struct backlight_device *ibm_backlight_device; static struct backlight_ops ibm_backlight_data = { .get_brightness = brightness_get, .update_status = brightness_update_status, }; +static struct mutex brightness_mutex; + static int __init brightness_init(struct ibm_init_struct *iibm) { int b; vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n"); + mutex_init(&brightness_mutex); + + if (!brightness_mode) { + if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) + brightness_mode = 2; + else + brightness_mode = 3; + + dbg_printk(TPACPI_DBG_INIT, "selected brightness_mode=%d\n", + brightness_mode); + } + + if (brightness_mode > 3) + return -EINVAL; + b = brightness_get(NULL); if (b < 0) - return b; + return 1; ibm_backlight_device = backlight_device_register( TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL, @@ -2722,34 +3061,79 @@ static int brightness_update_status(struct backlight_device *bd) bd->props.brightness : 0); } +/* + * ThinkPads can read brightness from two places: EC 0x31, or + * CMOS NVRAM byte 0x5E, bits 0-3. + */ static int brightness_get(struct backlight_device *bd) { - u8 level; - if (!acpi_ec_read(brightness_offset, &level)) - return -EIO; + u8 lec = 0, lcmos = 0, level = 0; - level &= 0x7; + if (brightness_mode & 1) { + if (!acpi_ec_read(brightness_offset, &lec)) + return -EIO; + lec &= 7; + level = lec; + }; + if (brightness_mode & 2) { + lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS) + & TP_NVRAM_MASK_LEVEL_BRIGHTNESS) + >> TP_NVRAM_POS_LEVEL_BRIGHTNESS; + level = lcmos; + } + + if (brightness_mode == 3 && lec != lcmos) { + printk(IBM_ERR + "CMOS NVRAM (%u) and EC (%u) do not agree " + "on display brightness level\n", + (unsigned int) lcmos, + (unsigned int) lec); + return -EIO; + } return level; } static int brightness_set(int value) { - int cmos_cmd, inc, i; - int current_value = brightness_get(NULL); + int cmos_cmd, inc, i, res; + int current_value; + + if (value > 7) + return -EINVAL; - value &= 7; + res = mutex_lock_interruptible(&brightness_mutex); + if (res < 0) + return res; + + current_value = brightness_get(NULL); + if (current_value < 0) { + res = current_value; + goto errout; + } - cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? + TP_CMOS_BRIGHTNESS_UP : + TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; + + res = 0; for (i = current_value; i != value; i += inc) { - if (issue_thinkpad_cmos_command(cmos_cmd)) - return -EIO; - if (!acpi_ec_write(brightness_offset, i + inc)) - return -EIO; + if ((brightness_mode & 2) && + issue_thinkpad_cmos_command(cmos_cmd)) { + res = -EIO; + goto errout; + } + if ((brightness_mode & 1) && + !acpi_ec_write(brightness_offset, i + inc)) { + res = -EIO; + goto errout;; + } } - return 0; +errout: + mutex_unlock(&brightness_mutex); + return res; } static int brightness_read(char *p) @@ -3273,20 +3657,19 @@ static int __init fan_init(struct ibm_init_struct *iibm) * Enable for TP-1Y (T43), TP-78 (R51e), * TP-76 (R52), TP-70 (T43, R52), which are known * to be buggy. */ - if (fan_control_initial_status == 0x07 && - ibm_thinkpad_ec_found && - ((ibm_thinkpad_ec_found[0] == '1' && - ibm_thinkpad_ec_found[1] == 'Y') || - (ibm_thinkpad_ec_found[0] == '7' && - (ibm_thinkpad_ec_found[1] == '6' || - ibm_thinkpad_ec_found[1] == '8' || - ibm_thinkpad_ec_found[1] == '0')) - )) { - printk(IBM_NOTICE - "fan_init: initial fan status is " - "unknown, assuming it is in auto " - "mode\n"); - tp_features.fan_ctrl_status_undef = 1; + if (fan_control_initial_status == 0x07) { + switch (thinkpad_id.ec_model) { + case 0x5931: /* TP-1Y */ + case 0x3837: /* TP-78 */ + case 0x3637: /* TP-76 */ + case 0x3037: /* TP-70 */ + printk(IBM_NOTICE + "fan_init: initial fan status is " + "unknown, assuming it is in auto " + "mode\n"); + tp_features.fan_ctrl_status_undef = 1; + ;; + } } } else { printk(IBM_ERR @@ -3474,7 +3857,7 @@ static void fan_watchdog_fire(struct work_struct *ignored) static void fan_watchdog_reset(void) { - static int fan_watchdog_active = 0; + static int fan_watchdog_active; if (fan_control_access_mode == TPACPI_FAN_WR_NONE) return; @@ -3877,7 +4260,7 @@ static struct ibm_struct fan_driver_data = { ****************************************************************************/ /* /proc support */ -static struct proc_dir_entry *proc_dir = NULL; +static struct proc_dir_entry *proc_dir; /* Subdriver registry */ static LIST_HEAD(tpacpi_all_drivers); @@ -4020,13 +4403,30 @@ static void ibm_exit(struct ibm_struct *ibm) /* Probing */ -static char *ibm_thinkpad_ec_found = NULL; - -static char* __init check_dmi_for_ec(void) +static void __init get_thinkpad_model_data(struct thinkpad_id_data *tp) { struct dmi_device *dev = NULL; char ec_fw_string[18]; + if (!tp) + return; + + memset(tp, 0, sizeof(*tp)); + + if (dmi_name_in_vendors("IBM")) + tp->vendor = PCI_VENDOR_ID_IBM; + else if (dmi_name_in_vendors("LENOVO")) + tp->vendor = PCI_VENDOR_ID_LENOVO; + else + return; + + tp->bios_version_str = kstrdup(dmi_get_system_info(DMI_BIOS_VERSION), + GFP_KERNEL); + if (!tp->bios_version_str) + return; + tp->bios_model = tp->bios_version_str[0] + | (tp->bios_version_str[1] << 8); + /* * ThinkPad T23 or newer, A31 or newer, R50e or newer, * X32 or newer, all Z series; Some models must have an @@ -4040,10 +4440,20 @@ static char* __init check_dmi_for_ec(void) ec_fw_string) == 1) { ec_fw_string[sizeof(ec_fw_string) - 1] = 0; ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; - return kstrdup(ec_fw_string, GFP_KERNEL); + + tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL); + tp->ec_model = ec_fw_string[0] + | (ec_fw_string[1] << 8); + break; } } - return NULL; + + tp->model_str = kstrdup(dmi_get_system_info(DMI_PRODUCT_VERSION), + GFP_KERNEL); + if (strnicmp(tp->model_str, "ThinkPad", 8) != 0) { + kfree(tp->model_str); + tp->model_str = NULL; + } } static int __init probe_for_thinkpad(void) @@ -4057,7 +4467,7 @@ static int __init probe_for_thinkpad(void) * Non-ancient models have better DMI tagging, but very old models * don't. */ - is_thinkpad = dmi_name_in_vendors("ThinkPad"); + is_thinkpad = (thinkpad_id.model_str != NULL); /* ec is required because many other handles are relative to it */ IBM_ACPIHANDLE_INIT(ec); @@ -4073,7 +4483,7 @@ static int __init probe_for_thinkpad(void) * false positives a damn great deal */ if (!is_thinkpad) - is_thinkpad = dmi_name_in_vendors("IBM"); + is_thinkpad = (thinkpad_id.vendor == PCI_VENDOR_ID_IBM); if (!is_thinkpad && !force_load) return -ENODEV; @@ -4185,10 +4595,13 @@ static u32 dbg_level; module_param_named(debug, dbg_level, uint, 0); static int force_load; -module_param(force_load, int, 0); +module_param(force_load, bool, 0); static int fan_control_allowed; -module_param_named(fan_control, fan_control_allowed, int, 0); +module_param_named(fan_control, fan_control_allowed, bool, 0); + +static int brightness_mode; +module_param_named(brightness_mode, brightness_mode, int, 0); #define IBM_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0) @@ -4216,12 +4629,16 @@ static int __init thinkpad_acpi_module_init(void) int ret, i; /* Driver-level probe */ + + get_thinkpad_model_data(&thinkpad_id); ret = probe_for_thinkpad(); - if (ret) + if (ret) { + thinkpad_acpi_module_exit(); return ret; + } /* Driver initialization */ - ibm_thinkpad_ec_found = check_dmi_for_ec(); + IBM_ACPIHANDLE_INIT(ecrd); IBM_ACPIHANDLE_INIT(ecwr); @@ -4265,6 +4682,22 @@ static int __init thinkpad_acpi_module_init(void) thinkpad_acpi_module_exit(); return ret; } + tpacpi_inputdev = input_allocate_device(); + if (!tpacpi_inputdev) { + printk(IBM_ERR "unable to allocate input device\n"); + thinkpad_acpi_module_exit(); + return -ENOMEM; + } else { + /* Prepare input device, but don't register */ + tpacpi_inputdev->name = "ThinkPad Extra Buttons"; + tpacpi_inputdev->phys = IBM_DRVR_NAME "/input0"; + tpacpi_inputdev->id.bustype = BUS_HOST; + tpacpi_inputdev->id.vendor = (thinkpad_id.vendor) ? + thinkpad_id.vendor : + PCI_VENDOR_ID_IBM; + tpacpi_inputdev->id.product = TPACPI_HKEY_INPUT_PRODUCT; + tpacpi_inputdev->id.version = TPACPI_HKEY_INPUT_VERSION; + } for (i = 0; i < ARRAY_SIZE(ibms_init); i++) { ret = ibm_init(&ibms_init[i]); if (ret >= 0 && *ibms_init[i].param) @@ -4274,6 +4707,14 @@ static int __init thinkpad_acpi_module_init(void) return ret; } } + ret = input_register_device(tpacpi_inputdev); + if (ret < 0) { + printk(IBM_ERR "unable to register input device\n"); + thinkpad_acpi_module_exit(); + return ret; + } else { + tp_features.input_device_registered = 1; + } return 0; } @@ -4290,6 +4731,13 @@ static void thinkpad_acpi_module_exit(void) dbg_printk(TPACPI_DBG_INIT, "finished subdriver exit path...\n"); + if (tpacpi_inputdev) { + if (tp_features.input_device_registered) + input_unregister_device(tpacpi_inputdev); + else + input_free_device(tpacpi_inputdev); + } + if (tpacpi_hwmon) hwmon_device_unregister(tpacpi_hwmon); @@ -4302,7 +4750,9 @@ static void thinkpad_acpi_module_exit(void) if (proc_dir) remove_proc_entry(IBM_PROC_DIR, acpi_root_dir); - kfree(ibm_thinkpad_ec_found); + kfree(thinkpad_id.bios_version_str); + kfree(thinkpad_id.ec_version_str); + kfree(thinkpad_id.model_str); } module_init(thinkpad_acpi_module_init); diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h index 72d62f2dabb..b7a4a888cc8 100644 --- a/drivers/misc/thinkpad_acpi.h +++ b/drivers/misc/thinkpad_acpi.h @@ -32,6 +32,7 @@ #include <linux/list.h> #include <linux/mutex.h> +#include <linux/nvram.h> #include <linux/proc_fs.h> #include <linux/sysfs.h> #include <linux/backlight.h> @@ -39,6 +40,7 @@ #include <linux/platform_device.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> +#include <linux/input.h> #include <asm/uaccess.h> #include <linux/dmi.h> @@ -48,6 +50,7 @@ #include <acpi/acpi_drivers.h> #include <acpi/acnamesp.h> +#include <linux/pci_ids.h> /**************************************************************************** * Main driver @@ -78,6 +81,11 @@ #define TP_CMOS_BRIGHTNESS_UP 4 #define TP_CMOS_BRIGHTNESS_DOWN 5 +/* ThinkPad CMOS NVRAM constants */ +#define TP_NVRAM_ADDR_BRIGHTNESS 0x5e +#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x07 +#define TP_NVRAM_POS_LEVEL_BRIGHTNESS 0 + #define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") #define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") #define strlencmp(a,b) (strncmp((a), (b), strlen(b))) @@ -98,9 +106,13 @@ static const char *str_supported(int is_supported); #define vdbg_printk(a_dbg_level, format, arg...) #endif +/* Input IDs */ +#define TPACPI_HKEY_INPUT_VENDOR PCI_VENDOR_ID_IBM +#define TPACPI_HKEY_INPUT_PRODUCT 0x5054 /* "TP" */ +#define TPACPI_HKEY_INPUT_VERSION 0x4101 + /* ACPI HIDs */ #define IBM_HKEY_HID "IBM0068" -#define IBM_PCI_HID "PNP0A03" /* ACPI helpers */ static int __must_check acpi_evalf(acpi_handle handle, @@ -161,6 +173,7 @@ static int parse_strtoul(const char *buf, unsigned long max, static struct platform_device *tpacpi_pdev; static struct class_device *tpacpi_hwmon; static struct platform_driver tpacpi_pdriver; +static struct input_dev *tpacpi_inputdev; static int tpacpi_create_driver_attributes(struct device_driver *drv); static void tpacpi_remove_driver_attributes(struct device_driver *drv); @@ -168,9 +181,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv); static int experimental; static u32 dbg_level; static int force_load; -static char *ibm_thinkpad_ec_found; -static char* check_dmi_for_ec(void); static int thinkpad_acpi_module_init(void); static void thinkpad_acpi_module_exit(void); @@ -197,6 +208,7 @@ struct ibm_struct { int (*read) (char *); int (*write) (char *); void (*exit) (void); + void (*resume) (void); struct list_head all_drivers; @@ -228,12 +240,29 @@ static struct { u16 bluetooth:1; u16 hotkey:1; u16 hotkey_mask:1; + u16 hotkey_wlsw:1; u16 light:1; u16 light_status:1; u16 wan:1; u16 fan_ctrl_status_undef:1; + u16 input_device_registered:1; } tp_features; +struct thinkpad_id_data { + unsigned int vendor; /* ThinkPad vendor: + * PCI_VENDOR_ID_IBM/PCI_VENDOR_ID_LENOVO */ + + char *bios_version_str; /* Something like 1ZET51WW (1.03z) */ + char *ec_version_str; /* Something like 1ZHT51WW-1.04a */ + + u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */ + u16 ec_model; + + char *model_str; +}; + +static struct thinkpad_id_data thinkpad_id; + static struct list_head tpacpi_all_drivers; static struct ibm_init_struct ibms_init[]; @@ -300,6 +329,7 @@ static int bluetooth_write(char *buf); static struct backlight_device *ibm_backlight_device; static int brightness_offset = 0x31; +static int brightness_mode; static int brightness_init(struct ibm_init_struct *iibm); static void brightness_exit(void); @@ -415,14 +445,14 @@ static int fan_write_cmd_watchdog(const char *cmd, int *rc); */ static int hotkey_orig_status; -static int hotkey_orig_mask; +static u32 hotkey_orig_mask; static struct mutex hotkey_mutex; static int hotkey_init(struct ibm_init_struct *iibm); static void hotkey_exit(void); -static int hotkey_get(int *status, int *mask); -static int hotkey_set(int status, int mask); +static int hotkey_get(int *status, u32 *mask); +static int hotkey_set(int status, u32 mask); static void hotkey_notify(struct ibm_struct *ibm, u32 event); static int hotkey_read(char *p); static int hotkey_write(char *buf); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b15c6498fe6..ced4d3f7610 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2040,6 +2040,8 @@ #define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea #define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb +#define PCI_VENDOR_ID_LENOVO 0x17aa + #define PCI_VENDOR_ID_ARECA 0x17d3 #define PCI_DEVICE_ID_ARECA_1110 0x1110 #define PCI_DEVICE_ID_ARECA_1120 0x1120 |