diff options
211 files changed, 4666 insertions, 5172 deletions
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt index 5580e9c4bd8..00318d083c9 100644 --- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt +++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt @@ -8,6 +8,8 @@ interrupt generation, MMC and NOR Flash control etc. Required node properties: - compatible value : = "arm,vexpress,sysreg"; - reg : physical base address and the size of the registers window + +Deprecated properties, replaced by GPIO subnodes (see below): - gpio-controller : specifies that the node is a GPIO controller - #gpio-cells : size of the GPIO specifier, should be 2: - first cell is the pseudo-GPIO line number: @@ -16,35 +18,86 @@ Required node properties: 2 - NOR FLASH WPn - second cell can take standard GPIO flags (currently ignored). +Control registers providing pseudo-GPIO lines must be represented +by subnodes, each of them requiring the following properties: +- compatible value : one of + "arm,vexpress-sysreg,sys_led" + "arm,vexpress-sysreg,sys_mci" + "arm,vexpress-sysreg,sys_flash" +- gpio-controller : makes the node a GPIO controller +- #gpio-cells : size of the GPIO specifier, must be 2: + - first cell is the function number: + - for sys_led : 0..7 = LED 0..7 + - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT + - for sys_flash : 0 = NOR FLASH WPn + - second cell can take standard GPIO flags (currently ignored). + Example: v2m_sysreg: sysreg@10000000 { compatible = "arm,vexpress-sysreg"; reg = <0x10000000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; This block also can also act a bridge to the platform's configuration bus via "system control" interface, addressing devices with site number, position in the board stack, config controller, function and device -numbers - see motherboard's TRM for more details. - -The node describing a config device must refer to the sysreg node via -"arm,vexpress,config-bridge" phandle (can be also defined in the node's -parent) and relies on the board topology properties - see main vexpress -node documentation for more details. It must also define the following -property: -- arm,vexpress-sysreg,func : must contain two cells: - - first cell defines function number (eg. 1 for clock generator, - 2 for voltage regulators etc.) - - device number (eg. osc 0, osc 1 etc.) +numbers - see motherboard's TRM for more details. All configuration +controller accessible via this interface must reference the sysreg +node via "arm,vexpress,config-bridge" phandle and define appropriate +topology properties - see main vexpress node documentation for more +details. Each child of such node describes one function and must +define the following properties: +- compatible value : must be one of (corresponding to the TRM): + "arm,vexpress-amp" + "arm,vexpress-dvimode" + "arm,vexpress-energy" + "arm,vexpress-muxfpga" + "arm,vexpress-osc" + "arm,vexpress-power" + "arm,vexpress-reboot" + "arm,vexpress-reset" + "arm,vexpress-scc" + "arm,vexpress-shutdown" + "arm,vexpress-temp" + "arm,vexpress-volt" +- arm,vexpress-sysreg,func : must contain a set of two cells long groups: + - first cell of each group defines the function number + (eg. 1 for clock generator, 2 for voltage regulators etc.) + - second cell of each group defines device number (eg. osc 0, + osc 1 etc.) + - some functions (eg. energy meter, with its 64 bit long counter) + are using more than one function/device number pair Example: mcc { + compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; osc@0 { compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; }; + + energy@0 { + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>, <13 1>; + }; }; diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt index ae49161e478..39844cd0bcc 100644 --- a/Documentation/devicetree/bindings/arm/vexpress.txt +++ b/Documentation/devicetree/bindings/arm/vexpress.txt @@ -80,12 +80,17 @@ but also control clock generators, voltage regulators, gather environmental data like temperature, power consumption etc. Even the video output switch (FPGA) is controlled that way. -Nodes describing devices controlled by this infrastructure should -point at the bridge device node: +The controllers are not mapped into normal memory address space +and must be accessed through bridges - other devices capable +of generating transactions on the configuration bus. + +The nodes describing configuration controllers must define +the following properties: +- compatible value: + compatible = "arm,vexpress,config-bus"; - bridge phandle: arm,vexpress,config-bridge = <phandle>; -This property can be also defined in a parent node (eg. for a DCC) -and is effective for all children. +and children describing available functions. Platform topology @@ -197,7 +202,7 @@ Example of a VE tile description (simplified) }; dcc { - compatible = "simple-bus"; + compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; osc@0 { diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt new file mode 100644 index 00000000000..0b64ad8dadf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt @@ -0,0 +1,50 @@ +* Samsung S3C2410 Clock Controller + +The S3C2410 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to the s3c2410, +s3c2440 and s3c2442 SoCs in the s3c24x family. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC. + - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC. + - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC. +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/samsung,s3c2410-clock.h header and can be used in device +tree sources. + +External clocks: + +The xti clock used as input for the plls is generated outside the SoC. It is +expected that is are defined using standard clock bindings with a +clock-output-names value of "xti". + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2410-clock"; + reg = <0x4c000000 0x20>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt new file mode 100644 index 00000000000..2b430960ba4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt @@ -0,0 +1,50 @@ +* Samsung S3C2412 Clock Controller + +The S3C2412 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to the s3c2412 +and s3c2413 SoCs in the s3c24x family. + +Required Properties: + +- compatible: should be "samsung,s3c2412-clock" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s3c2412.h header and can be used in device +tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xti" - crystal input - required, + - "ext" - external clock source - optional, + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2412-clock"; + reg = <0x4c000000 0x20>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2412-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt new file mode 100644 index 00000000000..e67bb05478a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt @@ -0,0 +1,56 @@ +* Samsung S3C2443 Clock Controller + +The S3C2443 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to all SoCs in +the s3c24x family starting with the s3c2443. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC. + - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC. + - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC. +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s3c2443.h header and can be used in device +tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xti" - crystal input - required, + - "ext" - external clock source - optional, + - "ext_i2s" - external I2S clock - optional, + - "ext_uart" - external uart clock - optional, + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; + status = "disabled"; + }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index db3c5414223..860bea828ac 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -314,6 +314,7 @@ config ARCH_MULTIPLATFORM select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_PCI select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index eab8ecbe69c..4678870f8ee 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -625,6 +625,7 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -637,6 +638,7 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -649,6 +651,7 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -670,6 +673,33 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_S3C2410_UART0 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 0 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 0. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART1 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 1 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 1. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART2 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 2 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 2. The port must have been initialised + by the boot-loader before use. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -921,6 +951,13 @@ endchoice config DEBUG_EXYNOS_UART bool +config DEBUG_S3C2410_UART + bool + select DEBUG_S3C24XX_UART + +config DEBUG_S3C24XX_UART + bool + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS @@ -973,6 +1010,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6SL_UART default "debug/msm.S" if DEBUG_MSM_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART + default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART @@ -1029,6 +1067,12 @@ config DEBUG_UART_PHYS default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI + default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ + DEBUG_S3C2410_UART0) + default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ + DEBUG_S3C2410_UART1) + default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ + DEBUG_S3C2410_UART2) default 0x7c0003f8 if FOOTBRIDGE default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART @@ -1058,7 +1102,7 @@ config DEBUG_UART_PHYS default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1075,6 +1119,12 @@ config DEBUG_UART_VIRT default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI + default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ + DEBUG_S3C2410_UART0) + default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ + DEBUG_S3C2410_UART1) + default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ + DEBUG_S3C2410_UART2) default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 @@ -1116,7 +1166,7 @@ config DEBUG_UART_VIRT default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 066b03480b6..3a8b32df6b3 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -60,11 +60,6 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_S3C24XX) - .macro loadsp, rb, tmp - mov \rb, #0x50000000 - add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT - .endm #else .macro loadsp, rb, tmp addruart \rb, \tmp diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 9d72674049d..317bc590a4d 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -195,6 +195,7 @@ compatible = "sirf,prima2-tick"; reg = <0xb0020000 0x1000>; interrupts = <0>; + clocks = <&clks 11>; }; nand@b0030000 { diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 1e82571d682..7e7d8843aba 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -201,6 +201,7 @@ compatible = "sirf,prima2-tick"; reg = <0xb0020000 0x1000>; interrupts = <0>; + clocks = <&clks 11>; }; nand@b0030000 { diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 59594cf1599..ea92fd69529 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -19,6 +19,19 @@ reg = <0x30000000 0x4000000>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + xti: xti { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "xti"; + #clock-cells = <0>; + }; + }; + serial@50000000 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index e6555bdd81b..955e4a4f8c3 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/s3c2443.h> #include "s3c24xx.dtsi" #include "s3c2416-pinctrl.dtsi" @@ -28,26 +29,53 @@ compatible = "samsung,s3c2416-irq"; }; + clocks: clock-controller@0x4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + pinctrl@56000000 { compatible = "samsung,s3c2416-pinctrl"; }; + timer@51000000 { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; + }; + serial@50000000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; }; serial@50004000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; }; serial@50008000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; }; serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, + <&clocks SCLK_UART>; status = "disabled"; }; @@ -55,6 +83,10 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, + <&clocks MUX_HSMMC0>; status = "disabled"; }; @@ -62,18 +94,28 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, + <&clocks MUX_HSMMC1>; status = "disabled"; }; watchdog@53000000 { interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; rtc@57000000 { compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; }; i2c@54000000 { compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index ac870fb3fa0..756c986995a 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -74,8 +74,24 @@ v2m_sysreg: sysreg@010000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; v2m_sysctl: sysctl@020000 { @@ -113,8 +129,8 @@ compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; vmmc-supply = <&v2m_fixed_3v3>; clocks = <&v2m_clk24mhz>, <&smbclk>; @@ -265,6 +281,58 @@ clock-output-names = "v2m:refclk32khz"; }; + leds { + compatible = "gpio-leds"; + + user@1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + user@2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; + + user@3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + user@4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + user@5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + user@6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + user@7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + user@8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + mcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index f1420368355..ba856d604fb 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -73,8 +73,24 @@ v2m_sysreg: sysreg@00000 { compatible = "arm,vexpress-sysreg"; reg = <0x00000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; v2m_sysctl: sysctl@01000 { @@ -112,8 +128,8 @@ compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; vmmc-supply = <&v2m_fixed_3v3>; clocks = <&v2m_clk24mhz>, <&smbclk>; @@ -264,6 +280,58 @@ clock-output-names = "v2m:refclk32khz"; }; + leds { + compatible = "gpio-leds"; + + user@1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + user@2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; + + user@3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + user@4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + user@5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + user@6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + user@7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + user@8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + mcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 15f98cbcb75..a25c262326d 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -312,6 +312,7 @@ arm,vexpress-sysreg,func = <12 0>; label = "A15 Pcore"; }; + power@1 { /* Total power for the three A7 cores */ compatible = "arm,vexpress-power"; @@ -322,14 +323,14 @@ energy@0 { /* Total energy for the two A15 cores */ compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 0>; + arm,vexpress-sysreg,func = <13 0>, <13 1>; label = "A15 Jcore"; }; energy@2 { /* Total energy for the three A7 cores */ compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 2>; + arm,vexpress-sysreg,func = <13 2>, <13 3>; label = "A7 Jcore"; }; }; diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index abe61bf379d..1da5d9e4822 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -76,8 +76,10 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_VERSATILE=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 7079cbe898a..d02e9d911bb 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -75,8 +75,10 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_VERSATILE=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index 073541a50e2..d52b4ffe201 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -61,6 +61,9 @@ CONFIG_SND_ARMAACI=m CONFIG_MMC=y CONFIG_MMC_ARMMMCI=m CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_VERSATILE=y +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S new file mode 100644 index 00000000000..b1f54dc4888 --- /dev/null +++ b/arch/arm/include/debug/s3c24xx.S @@ -0,0 +1,46 @@ +/* arch/arm/mach-s3c2410/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2005 Simtec Electronics + * + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_s3c.h> + +#define S3C2410_UART1_OFF (0x4000) + + .macro addruart, rp, rv, tmp + ldr \rp, = CONFIG_DEBUG_UART_PHYS + ldr \rv, = CONFIG_DEBUG_UART_VIRT + .endm + + .macro fifo_full_s3c2410 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + tst \rd, #S3C2410_UFSTAT_TXFULL + .endm + + .macro fifo_level_s3c2410 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + and \rd, \rd, #S3C2410_UFSTAT_TXMASK + .endm + +/* Select the correct implementation depending on the configuration. The + * S3C2440 will get selected by default, as these are the most widely + * used variants of these +*/ + +#if defined(CONFIG_DEBUG_S3C2410_UART) +#define fifo_full fifo_full_s3c2410 +#define fifo_level fifo_level_s3c2410 +#endif + +/* include the reset of the code which will do the work */ + +#include <debug/samsung.S> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 49c914cd9c7..2113d92c668 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -10,22 +10,51 @@ if ARCH_BCM menu "Broadcom SoC Selection" config ARCH_BCM_MOBILE - bool "Broadcom Mobile SoC" if ARCH_MULTI_V7 - depends on MMU + bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC select GPIO_BCM_KONA select TICK_ONESHOT - select CACHE_L2X0 select HAVE_ARM_ARCH_TIMER select PINCTRL help This enables support for systems based on Broadcom mobile SoCs. - It currently supports the 'BCM281XX' family, which includes - BCM11130, BCM11140, BCM11351, BCM28145 and - BCM28155 variants. + +if ARCH_BCM_MOBILE + +menu "Broadcom Mobile SoC Selection" + +config ARCH_BCM_281XX + bool "Broadcom BCM281XX SoC family" + default y + help + Enable support for the the BCM281XX family, which includes + BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 + variants. + +config ARCH_BCM_21664 + bool "Broadcom BCM21664 SoC family" + default y + help + Enable support for the the BCM21664 family, which includes + BCM21663 and BCM21664 variants. + +config ARCH_BCM_MOBILE_L2_CACHE + bool "Broadcom mobile SoC level 2 cache support" + depends on (ARCH_BCM_281XX || ARCH_BCM_21664) + default y + select CACHE_L2X0 + select ARCH_BCM_MOBILE_SMC + +config ARCH_BCM_MOBILE_SMC + bool + depends on ARCH_BCM_281XX || ARCH_BCM_21664 + +endmenu + +endif config ARCH_BCM2835 bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 @@ -33,10 +62,7 @@ config ARCH_BCM2835 select ARM_AMBA select ARM_ERRATA_411920 select ARM_TIMER_SP804 - select CLKDEV_LOOKUP select CLKSRC_OF - select CPU_V6 - select GENERIC_CLOCKEVENTS select PINCTRL select PINCTRL_BCM2835 help @@ -45,17 +71,12 @@ config ARCH_BCM2835 config ARCH_BCM_5301X bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7 - depends on MMU select ARM_GIC select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select COMMON_CLK - select GENERIC_CLOCKEVENTS select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK - select MIGHT_HAVE_PCI help Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index a326b28c440..73129211497 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -10,10 +10,23 @@ # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o board_bcm21664.o \ - bcm_kona_smc.o bcm_kona_smc_asm.o kona.o +# BCM281XX +obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o + +# BCM21664 +obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o + +# BCM281XX and BCM21664 L2 cache control +obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o + +# Support for secure monitor traps +obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o +ifeq ($(call as-instr,.arch_extension sec,as_has_sec),as_has_sec) +CFLAGS_bcm_kona_smc.o += -Wa,-march=armv7-a+sec -DREQUIRES_SEC +endif + +# BCM2835 obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) +# BCM5301X obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index 5e31e918f32..a55a7ecf146 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -21,11 +21,8 @@ #include "bcm_kona_smc.h" -struct secure_bridge_data { - void __iomem *bounce; /* virtual address */ - u32 __iomem buffer_addr; /* physical address */ - int initialized; -} bridge_data; +static u32 bcm_smc_buffer_phys; /* physical address */ +static void __iomem *bcm_smc_buffer; /* virtual address */ struct bcm_kona_smc_data { unsigned service_id; @@ -33,6 +30,7 @@ struct bcm_kona_smc_data { unsigned arg1; unsigned arg2; unsigned arg3; + unsigned result; }; static const struct of_device_id bcm_kona_smc_ids[] __initconst = { @@ -41,59 +39,125 @@ static const struct of_device_id bcm_kona_smc_ids[] __initconst = { {}, }; -/* Map in the bounce area */ +/* Map in the args buffer area */ int __init bcm_kona_smc_init(void) { struct device_node *node; + const __be32 *prop_val; + u64 prop_size = 0; + unsigned long buffer_size; + u32 buffer_phys; /* Read buffer addr and size from the device tree node */ node = of_find_matching_node(NULL, bcm_kona_smc_ids); if (!node) return -ENODEV; - /* Don't care about size or flags of the DT node */ - bridge_data.buffer_addr = - be32_to_cpu(*of_get_address(node, 0, NULL, NULL)); - BUG_ON(!bridge_data.buffer_addr); + prop_val = of_get_address(node, 0, &prop_size, NULL); + if (!prop_val) + return -EINVAL; - bridge_data.bounce = of_iomap(node, 0); - BUG_ON(!bridge_data.bounce); + /* We assume space for four 32-bit arguments */ + if (prop_size < 4 * sizeof(u32) || prop_size > (u64)ULONG_MAX) + return -EINVAL; + buffer_size = (unsigned long)prop_size; - bridge_data.initialized = 1; + buffer_phys = be32_to_cpup(prop_val); + if (!buffer_phys) + return -EINVAL; + + bcm_smc_buffer = ioremap(buffer_phys, buffer_size); + if (!bcm_smc_buffer) + return -ENOMEM; + bcm_smc_buffer_phys = buffer_phys; pr_info("Kona Secure API initialized\n"); return 0; } +/* + * int bcm_kona_do_smc(u32 service_id, u32 buffer_addr) + * + * Only core 0 can run the secure monitor code. If an "smc" request + * is initiated on a different core it must be redirected to core 0 + * for execution. We rely on the caller to handle this. + * + * Each "smc" request supplies a service id and the address of a + * buffer containing parameters related to the service to be + * performed. A flags value defines the behavior of the level 2 + * cache and interrupt handling while the secure monitor executes. + * + * Parameters to the "smc" request are passed in r4-r6 as follows: + * r4 service id + * r5 flags (SEC_ROM_*) + * r6 physical address of buffer with other parameters + * + * Execution of an "smc" request produces two distinct results. + * + * First, the secure monitor call itself (regardless of the specific + * service request) can succeed, or can produce an error. When an + * "smc" request completes this value is found in r12; it should + * always be SEC_EXIT_NORMAL. + * + * In addition, the particular service performed produces a result. + * The values that should be expected depend on the service. We + * therefore return this value to the caller, so it can handle the + * request result appropriately. This result value is found in r0 + * when the "smc" request completes. + */ +static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys) +{ + register u32 ip asm("ip"); /* Also called r12 */ + register u32 r0 asm("r0"); + register u32 r4 asm("r4"); + register u32 r5 asm("r5"); + register u32 r6 asm("r6"); + + r4 = service_id; + r5 = 0x3; /* Keep IRQ and FIQ off in SM */ + r6 = buffer_phys; + + asm volatile ( + /* Make sure we got the registers we want */ + __asmeq("%0", "ip") + __asmeq("%1", "r0") + __asmeq("%2", "r4") + __asmeq("%3", "r5") + __asmeq("%4", "r6") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + " smc #0\n" + : "=r" (ip), "=r" (r0) + : "r" (r4), "r" (r5), "r" (r6) + : "r1", "r2", "r3", "r7", "lr"); + + BUG_ON(ip != SEC_EXIT_NORMAL); + + return r0; +} + /* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */ static void __bcm_kona_smc(void *info) { struct bcm_kona_smc_data *data = info; - u32 *args = bridge_data.bounce; - int rc = 0; + u32 *args = bcm_smc_buffer; - /* Must run on CPU 0 */ BUG_ON(smp_processor_id() != 0); + BUG_ON(!args); - /* Check map in the bounce area */ - BUG_ON(!bridge_data.initialized); - - /* Copy one 32 bit word into the bounce area */ - args[0] = data->arg0; - args[1] = data->arg1; - args[2] = data->arg2; - args[3] = data->arg3; + /* Copy the four 32 bit argument values into the bounce area */ + writel_relaxed(data->arg0, args++); + writel_relaxed(data->arg1, args++); + writel_relaxed(data->arg2, args++); + writel(data->arg3, args); /* Flush caches for input data passed to Secure Monitor */ - if (data->service_id != SSAPI_BRCM_START_VC_CORE) - flush_cache_all(); - - /* Trap into Secure Monitor */ - rc = bcm_kona_smc_asm(data->service_id, bridge_data.buffer_addr); + flush_cache_all(); - if (rc != SEC_ROM_RET_OK) - pr_err("Secure Monitor call failed (0x%x)!\n", rc); + /* Trap into Secure Monitor and record the request result */ + data->result = bcm_kona_do_smc(data->service_id, bcm_smc_buffer_phys); } unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, unsigned arg1, @@ -106,17 +170,13 @@ unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, unsigned arg1, data.arg1 = arg1; data.arg2 = arg2; data.arg3 = arg3; + data.result = 0; /* * Due to a limitation of the secure monitor, we must use the SMP * infrastructure to forward all secure monitor calls to Core 0. */ - if (get_cpu() != 0) - smp_call_function_single(0, __bcm_kona_smc, (void *)&data, 1); - else - __bcm_kona_smc(&data); + smp_call_function_single(0, __bcm_kona_smc, &data, 1); - put_cpu(); - - return 0; + return data.result; } diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h index d098a7e7674..2e29ec67e41 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.h +++ b/arch/arm/mach-bcm/bcm_kona_smc.h @@ -15,55 +15,12 @@ #define BCM_KONA_SMC_H #include <linux/types.h> -#define FLAGS (SEC_ROM_ICACHE_ENABLE_MASK | SEC_ROM_DCACHE_ENABLE_MASK | \ - SEC_ROM_IRQ_ENABLE_MASK | SEC_ROM_FIQ_ENABLE_MASK) -/*! - * Definitions for IRQ & FIQ Mask for ARM - */ - -#define FIQ_IRQ_MASK 0xC0 -#define FIQ_MASK 0x40 -#define IRQ_MASK 0x80 - -/*! - * Secure Mode FLAGs - */ - -/* When set, enables ICache within the secure mode */ -#define SEC_ROM_ICACHE_ENABLE_MASK 0x00000001 - -/* When set, enables DCache within the secure mode */ -#define SEC_ROM_DCACHE_ENABLE_MASK 0x00000002 - -/* When set, enables IRQ within the secure mode */ -#define SEC_ROM_IRQ_ENABLE_MASK 0x00000004 - -/* When set, enables FIQ within the secure mode */ -#define SEC_ROM_FIQ_ENABLE_MASK 0x00000008 - -/* When set, enables Unified L2 cache within the secure mode */ -#define SEC_ROM_UL2_CACHE_ENABLE_MASK 0x00000010 - -/* Broadcom Secure Service API Service IDs */ -#define SSAPI_DORMANT_ENTRY_SERV 0x01000000 -#define SSAPI_PUBLIC_OTP_SERV 0x01000001 -#define SSAPI_ENABLE_L2_CACHE 0x01000002 -#define SSAPI_DISABLE_L2_CACHE 0x01000003 -#define SSAPI_WRITE_SCU_STATUS 0x01000004 -#define SSAPI_WRITE_PWR_GATE 0x01000005 - -/* Broadcom Secure Service API Return Codes */ +/* Broadcom Secure Service API service IDs, return codes, and exit codes */ +#define SSAPI_ENABLE_L2_CACHE 0x01000002 #define SEC_ROM_RET_OK 0x00000001 -#define SEC_ROM_RET_FAIL 0x00000009 - -#define SSAPI_RET_FROM_INT_SERV 0x4 #define SEC_EXIT_NORMAL 0x1 -#define SSAPI_ROW_AES 0x0E000006 -#define SSAPI_BRCM_START_VC_CORE 0x0E000008 - -#ifndef __ASSEMBLY__ extern int __init bcm_kona_smc_init(void); extern unsigned bcm_kona_smc(unsigned service_id, @@ -72,9 +29,4 @@ extern unsigned bcm_kona_smc(unsigned service_id, unsigned arg2, unsigned arg3); -extern int bcm_kona_smc_asm(u32 service_id, - u32 buffer_addr); - -#endif /* __ASSEMBLY__ */ - #endif /* BCM_KONA_SMC_H */ diff --git a/arch/arm/mach-bcm/bcm_kona_smc_asm.S b/arch/arm/mach-bcm/bcm_kona_smc_asm.S deleted file mode 100644 index a1608480d60..00000000000 --- a/arch/arm/mach-bcm/bcm_kona_smc_asm.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2013 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/linkage.h> -#include "bcm_kona_smc.h" - -/* - * int bcm_kona_smc_asm(u32 service_id, u32 buffer_addr) - */ - -ENTRY(bcm_kona_smc_asm) - stmfd sp!, {r4-r12, lr} - mov r4, r0 @ service_id - mov r5, #3 @ Keep IRQ and FIQ off in SM - /* - * Since interrupts are disabled in the open mode, we must keep - * interrupts disabled in secure mode by setting R5=0x3. If interrupts - * are enabled in open mode, we can set R5=0x0 to allow interrupts in - * secure mode. If we did this, the secure monitor would return back - * control to the open mode to handle the interrupt prior to completing - * the secure service. If this happened, R12 would not be - * SEC_EXIT_NORMAL and we would need to call SMC again after resetting - * R5 (it gets clobbered by the secure monitor) and setting R4 to - * SSAPI_RET_FROM_INT_SERV to indicate that we want the secure monitor - * to finish up the previous uncompleted secure service. - */ - mov r6, r1 @ buffer_addr - smc #0 - /* Check r12 for SEC_EXIT_NORMAL here if interrupts are enabled */ - ldmfd sp!, {r4-r12, pc} -ENDPROC(bcm_kona_smc_asm) diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c index acc1573fd00..f0521cc0640 100644 --- a/arch/arm/mach-bcm/board_bcm21664.c +++ b/arch/arm/mach-bcm/board_bcm21664.c @@ -11,14 +11,13 @@ * GNU General Public License for more details. */ -#include <linux/clocksource.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/io.h> #include <asm/mach/arch.h> -#include "bcm_kona_smc.h" -#include "kona.h" +#include "kona_l2_cache.h" #define RSTMGR_DT_STRING "brcm,bcm21664-resetmgr" diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index 6be54c10f8c..1ac59fc0cb1 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -17,7 +17,7 @@ #include <asm/mach/arch.h> -#include "kona.h" +#include "kona_l2_cache.h" #define SECWDOG_OFFSET 0x00000000 #define SECWDOG_RESERVED_MASK 0xe2000000 diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona_l2_cache.c index 768bc2837bf..b31970377c2 100644 --- a/arch/arm/mach-bcm/kona.c +++ b/arch/arm/mach-bcm/kona_l2_cache.c @@ -11,19 +11,18 @@ * GNU General Public License for more details. */ -#include <linux/of_platform.h> + +#include <linux/init.h> +#include <linux/printk.h> #include <asm/hardware/cache-l2x0.h> #include "bcm_kona_smc.h" -#include "kona.h" void __init kona_l2_cache_init(void) { + unsigned int result; int ret; - if (!IS_ENABLED(CONFIG_CACHE_L2X0)) - return; - ret = bcm_kona_smc_init(); if (ret) { pr_info("Secure API not available (%d). Skipping L2 init.\n", @@ -31,7 +30,12 @@ void __init kona_l2_cache_init(void) return; } - bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); + result = bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); + if (result != SEC_ROM_RET_OK) { + pr_err("Secure Monitor call failed (%u)! Skipping L2 init.\n", + result); + return; + } /* * The aux_val and aux_mask have no effect since L2 cache is already diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona_l2_cache.h index 3a7a017c29c..46f84a95ab1 100644 --- a/arch/arm/mach-bcm/kona.h +++ b/arch/arm/mach-bcm/kona_l2_cache.h @@ -11,4 +11,8 @@ * GNU General Public License for more details. */ -void __init kona_l2_cache_init(void); +#ifdef CONFIG_ARCH_BCM_MOBILE_L2_CACHE +void kona_l2_cache_init(void); +#else +#define kona_l2_cache_init() ((void)0) +#endif diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index dce8decd5d4..66838f42037 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,7 +1,6 @@ config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC - select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index a656dbe3b78..f6dcc256db5 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -12,20 +12,15 @@ obj- := # Core -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o -obj-$(CONFIG_ARCH_EXYNOS) += pmu.o - obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_ARCH_EXYNOS) += exynos-smc.o -obj-$(CONFIG_ARCH_EXYNOS) += firmware.o - plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 9ef3f83efaf..c1a2f2207af 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -15,6 +15,75 @@ #include <linux/reboot.h> #include <linux/of.h> +#define EXYNOS4210_CPU_ID 0x43210000 +#define EXYNOS4212_CPU_ID 0x43220000 +#define EXYNOS4412_CPU_ID 0xE4412200 +#define EXYNOS4_CPU_MASK 0xFFFE0000 + +#define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5420_SOC_ID 0xE5420000 +#define EXYNOS5440_SOC_ID 0xE5440000 +#define EXYNOS5_SOC_MASK 0xFFFFF000 + +extern unsigned long samsung_cpu_id; + +#define IS_SAMSUNG_CPU(name, id, mask) \ +static inline int is_samsung_##name(void) \ +{ \ + return ((samsung_cpu_id & mask) == (id & mask)); \ +} + +IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) + +#if defined(CONFIG_CPU_EXYNOS4210) +# define soc_is_exynos4210() is_samsung_exynos4210() +#else +# define soc_is_exynos4210() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4212) +# define soc_is_exynos4212() is_samsung_exynos4212() +#else +# define soc_is_exynos4212() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4412) +# define soc_is_exynos4412() is_samsung_exynos4412() +#else +# define soc_is_exynos4412() 0 +#endif + +#define EXYNOS4210_REV_0 (0x0) +#define EXYNOS4210_REV_1_0 (0x10) +#define EXYNOS4210_REV_1_1 (0x11) + +#if defined(CONFIG_SOC_EXYNOS5250) +# define soc_is_exynos5250() is_samsung_exynos5250() +#else +# define soc_is_exynos5250() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5420) +# define soc_is_exynos5420() is_samsung_exynos5420() +#else +# define soc_is_exynos5420() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5440) +# define soc_is_exynos5440() is_samsung_exynos5440() +#else +# define soc_is_exynos5440() 0 +#endif + +#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \ + soc_is_exynos4412()) +#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420()) + void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); struct map_desc; @@ -63,4 +132,7 @@ struct exynos_pmu_conf { extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); +extern void s5p_init_cpu(void __iomem *cpuid_addr); +extern unsigned int samsung_rev(void); + #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index c57cae0e877..3dd385ebf19 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -24,7 +24,6 @@ #include <asm/unified.h> #include <asm/cpuidle.h> -#include <plat/cpu.h> #include <plat/pm.h> #include <mach/map.h> diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index b32a907d021..59aab756702 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -26,8 +26,6 @@ #include <asm/mach/map.h> #include <asm/memory.h> -#include <plat/cpu.h> - #include "common.h" #include "mfc.h" #include "regs-pmu.h" @@ -308,17 +306,6 @@ void __init exynos_init_io(void) exynos_map_io(); } -struct bus_type exynos_subsys = { - .name = "exynos-core", - .dev_name = "exynos-core", -}; - -static int __init exynos_core_init(void) -{ - return subsys_system_register(&exynos_subsys, NULL); -} -core_initcall(exynos_core_init); - static int __init exynos4_l2x0_cache_init(void) { int ret; diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index aa01c4222b4..f6cb510aee8 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -18,8 +18,7 @@ #include <mach/map.h> -#include <plat/cpu.h> - +#include "common.h" #include "smc.h" static int exynos_do_idle(void) diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 5eead530c6f..3cab3f50668 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -19,61 +19,9 @@ #include <asm/cp15.h> #include <asm/smp_plat.h> -#include <plat/cpu.h> - #include "common.h" #include "regs-pmu.h" -static inline void cpu_enter_lowpower_a9(void) -{ - unsigned int v; - - asm volatile( - " mcr p15, 0, %1, c7, c5, 0\n" - " mcr p15, 0, %1, c7, c10, 4\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %3\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - -static inline void cpu_enter_lowpower_a15(void) -{ - unsigned int v; - - asm volatile( - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "Ir" (CR_C) - : "cc"); - - flush_cache_louis(); - - asm volatile( - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (0x40) - : "cc"); - - isb(); - dsb(); -} - static inline void cpu_leave_lowpower(void) { unsigned int v; @@ -132,19 +80,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) void __ref exynos_cpu_die(unsigned int cpu) { int spurious = 0; - int primary_part = 0; - /* - * we're ready for shutdown now, so do it. - * Exynos4 is A9 based while Exynos5 is A15; check the CPU part - * number by reading the Main ID register and then perform the - * appropriate sequence for entering low power. - */ - asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc"); - if ((primary_part & 0xfff0) == 0xc0f0) - cpu_enter_lowpower_a15(); - else - cpu_enter_lowpower_a9(); + v7_exit_coherency_flush(louis); platform_do_lowpower(cpu, &spurious); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 03e5e9f9470..c28cdb1c82c 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -26,8 +26,6 @@ #include <asm/smp_scu.h> #include <asm/firmware.h> -#include <plat/cpu.h> - #include "common.h" #include "regs-pmu.h" diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 15af0ceb0a6..ca672e24b5c 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -26,7 +26,6 @@ #include <asm/smp_scu.h> #include <asm/suspend.h> -#include <plat/cpu.h> #include <plat/pm-common.h> #include <plat/pll.h> #include <plat/regs-srom.h> diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index 05c7ce15322..fb0deda3b3a 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -13,8 +13,6 @@ #include <linux/kernel.h> #include <linux/bug.h> -#include <plat/cpu.h> - #include "common.h" #include "regs-pmu.h" diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5740296dc42..50bb546b893 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -796,7 +796,6 @@ config SOC_IMX6Q select ARM_ERRATA_764369 if SMP select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI select PINCTRL_IMX6Q select SOC_IMX6 diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 3f73eecbcfb..2052a90d998 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -3,15 +3,12 @@ config ARCH_MVEBU select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select IRQ_DOMAIN select PINCTRL select PLAT_ORION select MVEBU_MBUS select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB - select MIGHT_HAVE_PCI select PCI_QUIRKS if PCI - select OF_ADDRESS_PCI if ARCH_MVEBU @@ -38,7 +35,6 @@ config MACH_ARMADA_375 select ARM_ERRATA_753970 select ARM_GIC select ARMADA_375_CLK - select CPU_V7 select MACH_MVEBU_V7 select PINCTRL_ARMADA_375 help @@ -51,7 +47,6 @@ config MACH_ARMADA_38X select ARM_ERRATA_753970 select ARM_GIC select ARMADA_38X_CLK - select CPU_V7 select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X help @@ -86,13 +81,11 @@ config MACH_KIRKWOOD select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select KIRKWOOD_CLK - select OF_IRQ select ORION_IRQCHIP select ORION_TIMER select PCI select PCI_QUIRKS select PINCTRL_KIRKWOOD - select USE_OF help Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index b6885e42c0a..e87f2a83d6b 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -160,13 +160,13 @@ static u8 get_gpmc0_type(void) if (!fpga_map_addr) return -ENOMEM; - if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV))) + if (!(readw_relaxed(fpga_map_addr + REG_FPGA_REV))) /* we dont have an DEBUG FPGA??? */ /* Depend on #defines!! default to strata boot return param */ goto unmap; /* S8-DIP-OFF = 1, S8-DIP-ON = 0 */ - cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf; + cs = readw_relaxed(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf; /* ES2.0 SDP's onwards 4 dip switches are provided for CS */ if (omap_rev() >= OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index 3ff32543493..59cf310bc1e 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -138,7 +138,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate, if (!dd) return -EINVAL; - tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); + tmpset.cm_clksel1_pll = readl_relaxed(dd->mult_div1_reg); tmpset.cm_clksel1_pll &= ~(dd->mult_mask | dd->div1_mask); div = ((curr_prcm_set->xtal_speed / 1000000) - 1); diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c index 19f54d43349..0717dff1bc0 100644 --- a/arch/arm/mach-omap2/clkt2xxx_osc.c +++ b/arch/arm/mach-omap2/clkt2xxx_osc.c @@ -39,9 +39,9 @@ int omap2_enable_osc_ck(struct clk_hw *clk) { u32 pcc; - pcc = __raw_readl(prcm_clksrc_ctrl); + pcc = readl_relaxed(prcm_clksrc_ctrl); - __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); + writel_relaxed(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); return 0; } @@ -57,9 +57,9 @@ void omap2_disable_osc_ck(struct clk_hw *clk) { u32 pcc; - pcc = __raw_readl(prcm_clksrc_ctrl); + pcc = readl_relaxed(prcm_clksrc_ctrl); - __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); + writel_relaxed(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); } unsigned long omap2_osc_clk_recalc(struct clk_hw *clk, diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c index f467d072cd0..58dd3a9b726 100644 --- a/arch/arm/mach-omap2/clkt2xxx_sys.c +++ b/arch/arm/mach-omap2/clkt2xxx_sys.c @@ -33,7 +33,7 @@ u32 omap2xxx_get_sysclkdiv(void) { u32 div; - div = __raw_readl(prcm_clksrc_ctrl); + div = readl_relaxed(prcm_clksrc_ctrl); div &= OMAP_SYSCLKDIV_MASK; div >>= OMAP_SYSCLKDIV_SHIFT; diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index f17f00697cc..82c37b1becc 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -18,7 +18,6 @@ #include "powerdomain.h" #include "clock.h" -#include "omap_hwmod.h" /* * Clockdomain flags @@ -98,6 +97,8 @@ struct clkdm_dep { /* Possible flags for struct clockdomain._flags */ #define _CLKDM_FLAG_HWSUP_ENABLED BIT(0) +struct omap_hwmod; + /** * struct clockdomain - OMAP clockdomain * @name: clockdomain name diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index ce25abbcffa..8be6ea50c09 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -18,9 +18,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "soc.h" -#include "iomap.h" -#include "common.h" #include "prm2xxx.h" #include "cm.h" #include "cm2xxx.h" @@ -390,7 +387,7 @@ void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm) tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1); - if (cpu_is_omap2430()) + if (mdm) omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL); } @@ -405,19 +402,11 @@ static struct cm_ll_data omap2xxx_cm_ll_data = { int __init omap2xxx_cm_init(void) { - if (!cpu_is_omap24xx()) - return 0; - return cm_register(&omap2xxx_cm_ll_data); } static void __exit omap2xxx_cm_exit(void) { - if (!cpu_is_omap24xx()) - return; - - /* Should never happen */ - WARN(cm_unregister(&omap2xxx_cm_ll_data), - "%s: cm_ll_data function pointer mismatch\n", __func__); + cm_unregister(&omap2xxx_cm_ll_data); } __exitcall(omap2xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h index bfbd16fe915..72928a3ce2a 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h @@ -52,12 +52,12 @@ static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx) { - return __raw_readl(cm_base + module + idx); + return readl_relaxed(cm_base + module + idx); } static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx) { - __raw_writel(val, cm_base + module + idx); + writel_relaxed(val, cm_base + module + idx); } /* Read-modify-write a register in a CM module. Caller must lock */ diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index 40a22e5649a..b3f99e93def 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -50,13 +50,13 @@ /* Read a register in a CM instance */ static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx) { - return __raw_readl(cm_base + inst + idx); + return readl_relaxed(cm_base + inst + idx); } /* Write into a register in a CM */ static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx) { - __raw_writel(val, cm_base + inst + idx); + writel_relaxed(val, cm_base + inst + idx); } /* Read-modify-write a register in CM */ diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index cfb8891b0c0..15a778ce770 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -17,11 +17,8 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H #define __ARCH_ARM_MACH_OMAP2_CM_33XX_H -#include "common.h" - #include "cm.h" #include "cm-regbits-33xx.h" -#include "iomap.h" /* CM base address */ #define AM33XX_CM_BASE 0x44e00000 diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index f6f028867bf..129a4e7f6ef 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -18,9 +18,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "soc.h" -#include "iomap.h" -#include "common.h" #include "prm2xxx_3xxx.h" #include "cm.h" #include "cm3xxx.h" @@ -388,7 +385,8 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1); cm_context.iva2_cm_clksel2 = omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2); - cm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG); + cm_context.cm_sysconfig = + omap2_cm_read_mod_reg(OCP_MOD, OMAP3430_CM_SYSCONFIG); cm_context.sgx_cm_clksel = omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL); cm_context.dss_cm_clksel = @@ -418,7 +416,8 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5); cm_context.pll_cm_clken2 = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2); - cm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL); + cm_context.cm_polctrl = + omap2_cm_read_mod_reg(OCP_MOD, OMAP3430_CM_POLCTRL); cm_context.iva2_cm_fclken = omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN); cm_context.iva2_cm_clken_pll = @@ -519,7 +518,8 @@ void omap3_cm_restore_context(void) CM_CLKSEL1); omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD, CM_CLKSEL2); - __raw_writel(cm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG); + omap2_cm_write_mod_reg(cm_context.cm_sysconfig, OCP_MOD, + OMAP3430_CM_SYSCONFIG); omap2_cm_write_mod_reg(cm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD, CM_CLKSEL); omap2_cm_write_mod_reg(cm_context.dss_cm_clksel, OMAP3430_DSS_MOD, @@ -547,7 +547,8 @@ void omap3_cm_restore_context(void) OMAP3430ES2_CM_CLKSEL5); omap2_cm_write_mod_reg(cm_context.pll_cm_clken2, PLL_MOD, OMAP3430ES2_CM_CLKEN2); - __raw_writel(cm_context.cm_polctrl, OMAP3430_CM_POLCTRL); + omap2_cm_write_mod_reg(cm_context.cm_polctrl, OCP_MOD, + OMAP3430_CM_POLCTRL); omap2_cm_write_mod_reg(cm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD, CM_FCLKEN); omap2_cm_write_mod_reg(cm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD, @@ -669,19 +670,11 @@ static struct cm_ll_data omap3xxx_cm_ll_data = { int __init omap3xxx_cm_init(void) { - if (!cpu_is_omap34xx()) - return 0; - return cm_register(&omap3xxx_cm_ll_data); } static void __exit omap3xxx_cm_exit(void) { - if (!cpu_is_omap34xx()) - return; - - /* Should never happen */ - WARN(cm_unregister(&omap3xxx_cm_ll_data), - "%s: cm_ll_data function pointer mismatch\n", __func__); + cm_unregister(&omap3xxx_cm_ll_data); } __exitcall(omap3xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h index 8224c91b4d7..7a16b559812 100644 --- a/arch/arm/mach-omap2/cm3xxx.h +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -29,9 +29,8 @@ * These registers appear once per CM module. */ -#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3430_CM_SYSCONFIG 0x0010 +#define OMAP3430_CM_POLCTRL 0x009c #define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c index 535d66e2822..fe5cc7bae48 100644 --- a/arch/arm/mach-omap2/cm44xx.c +++ b/arch/arm/mach-omap2/cm44xx.c @@ -18,35 +18,32 @@ #include <linux/err.h> #include <linux/io.h> -#include "iomap.h" -#include "common.h" #include "cm.h" #include "cm1_44xx.h" #include "cm2_44xx.h" -#include "cm-regbits-44xx.h" /* CM1 hardware module low-level functions */ /* Read a register in CM1 */ u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_CM1_REGADDR(inst, reg)); + return readl_relaxed(cm_base + inst + reg); } /* Write into a register in CM1 */ void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_CM1_REGADDR(inst, reg)); + writel_relaxed(val, cm_base + inst + reg); } /* Read a register in CM2 */ u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_CM2_REGADDR(inst, reg)); + return readl_relaxed(cm2_base + inst + reg); } /* Write into a register in CM2 */ void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_CM2_REGADDR(inst, reg)); + writel_relaxed(val, cm2_base + inst + reg); } diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index 40b3b5a8445..8f6c4710877 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -14,11 +14,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> +#include <linux/bug.h> #include "cm2xxx.h" #include "cm3xxx.h" #include "cm44xx.h" -#include "common.h" /* * cm_ll_data: function pointers to SoC-specific implementations of diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index f5c4731b6f0..12aca56942c 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -21,8 +21,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "iomap.h" -#include "common.h" #include "clockdomain.h" #include "cm.h" #include "cm1_44xx.h" @@ -30,12 +28,18 @@ #include "cm44xx.h" #include "cminst44xx.h" #include "cm-regbits-34xx.h" -#include "cm-regbits-44xx.h" #include "prcm44xx.h" #include "prm44xx.h" #include "prcm_mpu44xx.h" #include "prcm-common.h" +#define OMAP4430_IDLEST_SHIFT 16 +#define OMAP4430_IDLEST_MASK (0x3 << 16) +#define OMAP4430_CLKTRCTRL_SHIFT 0 +#define OMAP4430_CLKTRCTRL_MASK (0x3 << 0) +#define OMAP4430_MODULEMODE_SHIFT 0 +#define OMAP4430_MODULEMODE_MASK (0x3 << 0) + /* * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield: * @@ -116,7 +120,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_cm_bases[part]); - return __raw_readl(_cm_bases[part] + inst + idx); + return readl_relaxed(_cm_bases[part] + inst + idx); } /* Write into a register in a CM instance */ @@ -125,7 +129,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_cm_bases[part]); - __raw_writel(val, _cm_bases[part] + inst + idx); + writel_relaxed(val, _cm_bases[part] + inst + idx); } /* Read-modify-write a register in CM1. Caller must lock */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 44bb4d544dc..751f3549bf6 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -151,32 +151,32 @@ void __iomem *omap_ctrl_base_get(void) u8 omap_ctrl_readb(u16 offset) { - return __raw_readb(OMAP_CTRL_REGADDR(offset)); + return readb_relaxed(OMAP_CTRL_REGADDR(offset)); } u16 omap_ctrl_readw(u16 offset) { - return __raw_readw(OMAP_CTRL_REGADDR(offset)); + return readw_relaxed(OMAP_CTRL_REGADDR(offset)); } u32 omap_ctrl_readl(u16 offset) { - return __raw_readl(OMAP_CTRL_REGADDR(offset)); + return readl_relaxed(OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writeb(u8 val, u16 offset) { - __raw_writeb(val, OMAP_CTRL_REGADDR(offset)); + writeb_relaxed(val, OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writew(u16 val, u16 offset) { - __raw_writew(val, OMAP_CTRL_REGADDR(offset)); + writew_relaxed(val, OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writel(u32 val, u16 offset) { - __raw_writel(val, OMAP_CTRL_REGADDR(offset)); + writel_relaxed(val, OMAP_CTRL_REGADDR(offset)); } /* @@ -188,12 +188,12 @@ void omap_ctrl_writel(u32 val, u16 offset) u32 omap4_ctrl_pad_readl(u16 offset) { - return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset)); + return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset)); } void omap4_ctrl_pad_writel(u32 val, u16 offset) { - __raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset)); + writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset)); } #ifdef CONFIG_ARCH_OMAP3 @@ -222,7 +222,7 @@ void omap3_ctrl_write_boot_mode(u8 bootmode) * * XXX This should use some omap_ctrl_writel()-type function */ - __raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4)); + writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4)); } #endif @@ -285,7 +285,7 @@ void omap3_clear_scratchpad_contents(void) if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & OMAP3430_GLOBAL_COLD_RST_MASK) { for ( ; offset <= max_offset; offset += 0x4) - __raw_writel(0x0, (v_addr + offset)); + writel_relaxed(0x0, (v_addr + offset)); omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK, OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET); diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 5689c88d986..a6d2cf1f8d0 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -91,7 +91,7 @@ static inline void dma_write(u32 val, int reg, int lch) addr += reg_map[reg].offset; addr += reg_map[reg].stride * lch; - __raw_writel(val, addr); + writel_relaxed(val, addr); } static inline u32 dma_read(int reg, int lch) @@ -101,7 +101,7 @@ static inline u32 dma_read(int reg, int lch) addr += reg_map[reg].offset; addr += reg_map[reg].stride * lch; - return __raw_readl(addr); + return readl_relaxed(addr); } static void omap2_clear_dma(int lch) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 9fe8c949305..852b19a367f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -170,12 +170,12 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev); static void gpmc_write_reg(int idx, u32 val) { - __raw_writel(val, gpmc_base + idx); + writel_relaxed(val, gpmc_base + idx); } static u32 gpmc_read_reg(int idx) { - return __raw_readl(gpmc_base + idx); + return readl_relaxed(gpmc_base + idx); } void gpmc_cs_write_reg(int cs, int idx, u32 val) @@ -183,7 +183,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val) void __iomem *reg_addr; reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - __raw_writel(val, reg_addr); + writel_relaxed(val, reg_addr); } static u32 gpmc_cs_read_reg(int cs, int idx) @@ -191,7 +191,7 @@ static u32 gpmc_cs_read_reg(int cs, int idx) void __iomem *reg_addr; reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - return __raw_readl(reg_addr); + return readl_relaxed(reg_addr); } /* TODO: Add support for gpmc_fck to clock framework and use it */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 157412e4273..f61f1bf68df 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -94,7 +94,7 @@ EXPORT_SYMBOL(omap_type); #define OMAP_TAP_DIE_ID_44XX_2 0x020c #define OMAP_TAP_DIE_ID_44XX_3 0x0210 -#define read_tap_reg(reg) __raw_readl(tap_base + (reg)) +#define read_tap_reg(reg) readl_relaxed(tap_base + (reg)) struct omap_id { u16 hawkeye; /* Silicon type (Hawkeye id) */ diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 6037a9a01ed..35b8590c322 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -83,12 +83,12 @@ struct omap3_intc_regs { static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) { - __raw_writel(val, bank->base_reg + reg); + writel_relaxed(val, bank->base_reg + reg); } static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) { - return __raw_readl(bank->base_reg + reg); + return readl_relaxed(bank->base_reg + reg); } /* XXX: FIQ and additional INTC support (only MPU at the moment) */ diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 48094b58c88..fd88edeb027 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -70,18 +70,18 @@ struct omap_mux_partition *omap_mux_get(const char *name) u16 omap_mux_read(struct omap_mux_partition *partition, u16 reg) { if (partition->flags & OMAP_MUX_REG_8BIT) - return __raw_readb(partition->base + reg); + return readb_relaxed(partition->base + reg); else - return __raw_readw(partition->base + reg); + return readw_relaxed(partition->base + reg); } void omap_mux_write(struct omap_mux_partition *partition, u16 val, u16 reg) { if (partition->flags & OMAP_MUX_REG_8BIT) - __raw_writeb(val, partition->base + reg); + writeb_relaxed(val, partition->base + reg); else - __raw_writew(val, partition->base + reg); + writew_relaxed(val, partition->base + reg); } void omap_mux_write_array(struct omap_mux_partition *partition, diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 458f72f9dc8..971791fe9a3 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -39,7 +39,7 @@ void __ref omap4_cpu_die(unsigned int cpu) if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0) pr_err("Secure clear status failed\n"); } else { - __raw_writel(0, base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(0, base + OMAP_AUX_CORE_BOOT_0); } @@ -53,7 +53,7 @@ void __ref omap4_cpu_die(unsigned int cpu) boot_cpu = omap_read_auxcoreboot0(); else boot_cpu = - __raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5; + readl_relaxed(base + OMAP_AUX_CORE_BOOT_0) >> 5; if (boot_cpu == smp_processor_id()) { /* diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 667915d236f..eb76e47091a 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -116,7 +116,7 @@ static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - __raw_writel(addr, pm_info->wkup_sar_addr); + writel_relaxed(addr, pm_info->wkup_sar_addr); } /* @@ -141,7 +141,7 @@ static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state) break; } - __raw_writel(scu_pwr_st, pm_info->scu_sar_addr); + writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr); } /* Helper functions for MPUSS OSWR */ @@ -179,7 +179,7 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - __raw_writel(save_state, pm_info->l2x0_sar_addr); + writel_relaxed(save_state, pm_info->l2x0_sar_addr); } /* @@ -192,10 +192,10 @@ static void save_l2x0_context(void) u32 val; void __iomem *l2x0_base = omap4_get_l2cache_base(); if (l2x0_base) { - val = __raw_readl(l2x0_base + L2X0_AUX_CTRL); - __raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET); - val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL); - __raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET); + val = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + writel_relaxed(val, sar_base + L2X0_AUXCTRL_OFFSET); + val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); + writel_relaxed(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET); } } #else @@ -386,9 +386,9 @@ int __init omap4_mpuss_init(void) /* Save device type on scratchpad for low level code to use */ if (omap_type() != OMAP2_DEVICE_TYPE_GP) - __raw_writel(1, sar_base + OMAP_TYPE_OFFSET); + writel_relaxed(1, sar_base + OMAP_TYPE_OFFSET); else - __raw_writel(0, sar_base + OMAP_TYPE_OFFSET); + writel_relaxed(0, sar_base + OMAP_TYPE_OFFSET); save_l2x0_context(); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 17550aa39d0..256e84ef0f6 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -99,7 +99,7 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) if (omap_secure_apis_support()) omap_modify_auxcoreboot0(0x200, 0xfffffdff); else - __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0); if (!cpu1_clkdm && !cpu1_pwrdm) { cpu1_clkdm = clkdm_lookup("mpu1_clkdm"); @@ -227,8 +227,8 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) if (omap_secure_apis_support()) omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else - __raw_writel(virt_to_phys(omap5_secondary_startup), - base + OMAP_AUX_CORE_BOOT_1); + writel_relaxed(virt_to_phys(omap5_secondary_startup), + base + OMAP_AUX_CORE_BOOT_1); } diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 693fe486e91..37843a7d363 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -60,19 +60,19 @@ static unsigned int omap_secure_apis; */ static inline u32 wakeupgen_readl(u8 idx, u32 cpu) { - return __raw_readl(wakeupgen_base + OMAP_WKG_ENB_A_0 + + return readl_relaxed(wakeupgen_base + OMAP_WKG_ENB_A_0 + (cpu * CPU_ENA_OFFSET) + (idx * 4)); } static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu) { - __raw_writel(val, wakeupgen_base + OMAP_WKG_ENB_A_0 + + writel_relaxed(val, wakeupgen_base + OMAP_WKG_ENB_A_0 + (cpu * CPU_ENA_OFFSET) + (idx * 4)); } static inline void sar_writel(u32 val, u32 offset, u8 idx) { - __raw_writel(val, sar_base + offset + (idx * 4)); + writel_relaxed(val, sar_base + offset + (idx * 4)); } static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index) @@ -231,21 +231,21 @@ static inline void omap4_irq_save_context(void) } /* Save AuxBoot* registers */ - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); - __raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET); - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_1); - __raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(val, sar_base + AUXCOREBOOT0_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_1); + writel_relaxed(val, sar_base + AUXCOREBOOT1_OFFSET); /* Save SyncReq generation logic */ - val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK); - __raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET); - val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN); - __raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_MASK); + writel_relaxed(val, sar_base + PTMSYNCREQ_MASK_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_EN); + writel_relaxed(val, sar_base + PTMSYNCREQ_EN_OFFSET); /* Set the Backup Bit Mask status */ - val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); + val = readl_relaxed(sar_base + SAR_BACKUP_STATUS_OFFSET); val |= SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET); + writel_relaxed(val, sar_base + SAR_BACKUP_STATUS_OFFSET); } @@ -264,15 +264,15 @@ static inline void omap5_irq_save_context(void) } /* Save AuxBoot* registers */ - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); - __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET); - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); - __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET); /* Set the Backup Bit Mask status */ - val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); + val = readl_relaxed(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); val |= SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); + writel_relaxed(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); } @@ -306,9 +306,9 @@ static void irq_sar_clear(void) if (soc_is_omap54xx()) offset = OMAP5_SAR_BACKUP_STATUS_OFFSET; - val = __raw_readl(sar_base + offset); + val = readl_relaxed(sar_base + offset); val &= ~SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + offset); + writel_relaxed(val, sar_base + offset); } /* diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 95e171a055f..99b0154493a 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -125,25 +125,25 @@ void __init gic_init_irq(void) void gic_dist_disable(void) { if (gic_dist_base_addr) - __raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL); + writel_relaxed(0x0, gic_dist_base_addr + GIC_DIST_CTRL); } void gic_dist_enable(void) { if (gic_dist_base_addr) - __raw_writel(0x1, gic_dist_base_addr + GIC_DIST_CTRL); + writel_relaxed(0x1, gic_dist_base_addr + GIC_DIST_CTRL); } bool gic_dist_disabled(void) { - return !(__raw_readl(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1); + return !(readl_relaxed(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1); } void gic_timer_retrigger(void) { - u32 twd_int = __raw_readl(twd_base + TWD_TIMER_INTSTAT); - u32 gic_int = __raw_readl(gic_dist_base_addr + GIC_DIST_PENDING_SET); - u32 twd_ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + u32 twd_int = readl_relaxed(twd_base + TWD_TIMER_INTSTAT); + u32 gic_int = readl_relaxed(gic_dist_base_addr + GIC_DIST_PENDING_SET); + u32 twd_ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL); if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) { /* @@ -151,11 +151,11 @@ void gic_timer_retrigger(void) * disabled. Ack the pending interrupt, and retrigger it. */ pr_warn("%s: lost localtimer interrupt\n", __func__); - __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT); if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) { - __raw_writel(1, twd_base + TWD_TIMER_COUNTER); + writel_relaxed(1, twd_base + TWD_TIMER_COUNTER); twd_ctrl |= TWD_TIMER_CONTROL_ENABLE; - __raw_writel(twd_ctrl, twd_base + TWD_TIMER_CONTROL); + writel_relaxed(twd_ctrl, twd_base + TWD_TIMER_CONTROL); } } } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 66c60fe1104..f7bb435bb54 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -72,7 +72,7 @@ * | (../mach-omap2/omap_hwmod*) | * +-------------------------------+ * | OMAP clock/PRCM/register fns | - * | (__raw_{read,write}l, clk*) | + * | ({read,write}l_relaxed, clk*) | * +-------------------------------+ * * Device drivers should not contain any OMAP-specific code or data in @@ -3230,17 +3230,17 @@ static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh, u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) { if (oh->flags & HWMOD_16BIT_REG) - return __raw_readw(oh->_mpu_rt_va + reg_offs); + return readw_relaxed(oh->_mpu_rt_va + reg_offs); else - return __raw_readl(oh->_mpu_rt_va + reg_offs); + return readl_relaxed(oh->_mpu_rt_va + reg_offs); } void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) { if (oh->flags & HWMOD_16BIT_REG) - __raw_writew(v, oh->_mpu_rt_va + reg_offs); + writew_relaxed(v, oh->_mpu_rt_va + reg_offs); else - __raw_writel(v, oh->_mpu_rt_va + reg_offs); + writel_relaxed(v, oh->_mpu_rt_va + reg_offs); } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 0f178623e7d..a579b89ce9b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -24,6 +24,7 @@ #include "prm33xx.h" #include "omap_hwmod_33xx_43xx_common_data.h" #include "prcm43xx.h" +#include "common.h" #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl)) #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl)) diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index eb8a25de67e..50640b38f0b 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -57,7 +57,7 @@ static int __init omap4430_phy_power_down(void) } /* Power down the phy */ - __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); + writel_relaxed(PHY_PD, ctrl_base + CONTROL_DEV_CONF); iounmap(ctrl_base); @@ -162,7 +162,7 @@ void ti81xx_musb_phy_power(u8 on) return; } - usbphycfg = __raw_readl(scm_base + USBCTRL0); + usbphycfg = readl_relaxed(scm_base + USBCTRL0); if (on) { if (cpu_is_ti816x()) { @@ -181,7 +181,7 @@ void ti81xx_musb_phy_power(u8 on) usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; } - __raw_writel(usbphycfg, scm_base + USBCTRL0); + writel_relaxed(usbphycfg, scm_base + USBCTRL0); iounmap(scm_base); } diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c index c0aeabfcf00..c40e5f00982 100644 --- a/arch/arm/mach-omap2/powerdomain-common.c +++ b/arch/arm/mach-omap2/powerdomain-common.c @@ -17,7 +17,6 @@ #include "pm.h" #include "cm.h" #include "cm-regbits-34xx.h" -#include "cm-regbits-44xx.h" #include "prm-regbits-34xx.h" #include "prm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 93a2a6e4260..faebd5f076a 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -32,6 +32,7 @@ #include "powerdomain.h" #include "clockdomain.h" +#include "voltage.h" #include "soc.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index da5a59ae77b..f4727117f6c 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -21,8 +21,6 @@ #include <linux/list.h> #include <linux/spinlock.h> -#include "voltage.h" - /* Powerdomain basic power states */ #define PWRDM_POWER_OFF 0x0 #define PWRDM_POWER_RET 0x1 @@ -75,6 +73,7 @@ struct clockdomain; struct powerdomain; +struct voltagedomain; /** * struct powerdomain - OMAP powerdomain diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 0e841fd9498..a8e4b582c52 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -428,6 +428,28 @@ #define MAX_IOPAD_LATCH_TIME 100 # ifndef __ASSEMBLER__ +#include <linux/delay.h> + +/** + * omap_test_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + */ +#define omap_test_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + /** * struct omap_prcm_irq - describes a PRCM interrupt bit * @name: a short name describing the interrupt type, e.g. "wkup" or "io" @@ -458,6 +480,7 @@ struct omap_prcm_irq { * @ocp_barrier: fn ptr to force buffered PRM writes to complete * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs * @restore_irqen: fn ptr to save and clear IRQENABLE regs + * @reconfigure_io_chain: fn ptr to reconfigure IO chain * @saved_mask: IRQENABLE regs are saved here during suspend * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init @@ -479,6 +502,7 @@ struct omap_prcm_irq_setup { void (*ocp_barrier)(void); void (*save_and_clear_irqen)(u32 *saved_mask); void (*restore_irqen)(u32 *saved_mask); + void (*reconfigure_io_chain)(void); u32 *saved_mask; u32 *priority_mask; int base_irq; diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index c30e44a7fab..cdbee6326d2 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -30,12 +30,12 @@ void __iomem *prcm_mpu_base; u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); + return readl_relaxed(OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); } void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); + writel_relaxed(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); } u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 059bd4f4903..ac9cb455023 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -26,7 +26,6 @@ #define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H #include "prcm_mpu_44xx_54xx.h" -#include "common.h" #define OMAP4430_PRCM_MPU_BASE 0x48243000 diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 623db40fdbb..48480d557b6 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -17,10 +17,18 @@ # ifndef __ASSEMBLER__ extern void __iomem *prm_base; +extern u16 prm_features; extern void omap2_set_globals_prm(void __iomem *prm); int of_prcm_init(void); # endif +/* + * prm_features flag values + * + * PRM_HAS_IO_WAKEUP: has IO wakeup capability + * PRM_HAS_VOLTAGE: has voltage domains + */ +#define PRM_HAS_IO_WAKEUP (1 << 0) /* * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP @@ -118,6 +126,7 @@ struct prm_reset_src_map { * @read_reset_sources: ptr to the SoC PRM-specific get_reset_source impl * @was_any_context_lost_old: ptr to the SoC PRM context loss test fn * @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn + * @late_init: ptr to the late init function * * XXX @was_any_context_lost_old and @clear_context_loss_flags_old are * deprecated. @@ -126,6 +135,7 @@ struct prm_ll_data { u32 (*read_reset_sources)(void); bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx); void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx); + int (*late_init)(void); }; extern int prm_register(struct prm_ll_data *pld); diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index 418de9c3b31..a3a3cca2bcc 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -18,9 +18,6 @@ #include <linux/io.h> #include <linux/irq.h> -#include "soc.h" -#include "common.h" -#include "vp.h" #include "powerdomain.h" #include "clockdomain.h" #include "prm2xxx.h" @@ -201,19 +198,11 @@ static struct prm_ll_data omap2xxx_prm_ll_data = { int __init omap2xxx_prm_init(void) { - if (!cpu_is_omap24xx()) - return 0; - return prm_register(&omap2xxx_prm_ll_data); } static void __exit omap2xxx_prm_exit(void) { - if (!cpu_is_omap24xx()) - return; - - /* Should never happen */ - WARN(prm_unregister(&omap2xxx_prm_ll_data), - "%s: prm_ll_data function pointer mismatch\n", __func__); + prm_unregister(&omap2xxx_prm_ll_data); } __exitcall(omap2xxx_prm_exit); diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h index 3194dd87e0e..d2cb6365716 100644 --- a/arch/arm/mach-omap2/prm2xxx.h +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -27,7 +27,7 @@ /* * OMAP2-specific global PRM registers - * Use __raw_{read,write}l() with these registers. + * Use {read,write}l_relaxed() with these registers. * * With a few exceptions, these are the register names beginning with * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 947f6adfed0..c13b4e293ff 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -16,7 +16,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "common.h" #include "powerdomain.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 9624b40836d..1a3a96392b9 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -55,12 +55,12 @@ /* Power/reset management domain register get/set */ static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) { - return __raw_readl(prm_base + module + idx); + return readl_relaxed(prm_base + module + idx); } static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) { - __raw_writel(val, prm_base + module + idx); + writel_relaxed(val, prm_base + module + idx); } /* Read-modify-write a register in a PRM module. Caller must lock */ diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index 72044073774..62709cd2f9c 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -19,7 +19,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "common.h" #include "powerdomain.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" @@ -27,13 +26,13 @@ /* Read a register in a PRM instance */ u32 am33xx_prm_read_reg(s16 inst, u16 idx) { - return __raw_readl(prm_base + inst + idx); + return readl_relaxed(prm_base + inst + idx); } /* Write into a register in a PRM instance */ void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx) { - __raw_writel(val, prm_base + inst + idx); + writel_relaxed(val, prm_base + inst + idx); } /* Read-modify-write a register in PRM. Caller must lock */ diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 7721990d200..4bd7a2dca8a 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -43,6 +43,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { .ocp_barrier = &omap3xxx_prm_ocp_barrier, .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, .restore_irqen = &omap3xxx_prm_restore_irqen, + .reconfigure_io_chain = &omap3xxx_prm_reconfigure_io_chain, }; /* @@ -246,7 +247,7 @@ void omap3xxx_prm_reconfigure_io_chain(void) */ static void __init omap3xxx_prm_enable_io_wakeup(void) { - if (omap3_has_io_wakeup()) + if (prm_features & PRM_HAS_IO_WAKEUP) omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); } @@ -400,23 +401,26 @@ struct pwrdm_ops omap3_pwrdm_operations = { * */ +static int omap3xxx_prm_late_init(void); + static struct prm_ll_data omap3xxx_prm_ll_data = { .read_reset_sources = &omap3xxx_prm_read_reset_sources, + .late_init = &omap3xxx_prm_late_init, }; int __init omap3xxx_prm_init(void) { - if (!cpu_is_omap34xx()) - return 0; + if (omap3_has_io_wakeup()) + prm_features |= PRM_HAS_IO_WAKEUP; return prm_register(&omap3xxx_prm_ll_data); } -static int __init omap3xxx_prm_late_init(void) +static int omap3xxx_prm_late_init(void) { int ret; - if (!cpu_is_omap34xx()) + if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; omap3xxx_prm_enable_io_wakeup(); @@ -427,15 +431,9 @@ static int __init omap3xxx_prm_late_init(void) return ret; } -omap_subsys_initcall(omap3xxx_prm_late_init); static void __exit omap3xxx_prm_exit(void) { - if (!cpu_is_omap34xx()) - return; - - /* Should never happen */ - WARN(prm_unregister(&omap3xxx_prm_ll_data), - "%s: prm_ll_data function pointer mismatch\n", __func__); + prm_unregister(&omap3xxx_prm_ll_data); } __exitcall(omap3xxx_prm_exit); diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index f8eb83323b1..1dacfc5b195 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -26,7 +26,7 @@ /* * OMAP3-specific global PRM registers - * Use __raw_{read,write}l() with these registers. + * Use {read,write}l_relaxed() with these registers. * * With a few exceptions, these are the register names beginning with * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 03a603476cf..a7f6ea27180 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -47,6 +47,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { .ocp_barrier = &omap44xx_prm_ocp_barrier, .save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen, .restore_irqen = &omap44xx_prm_restore_irqen, + .reconfigure_io_chain = &omap44xx_prm_reconfigure_io_chain, }; /* @@ -81,13 +82,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { /* Read a register in a CM/PRM instance in the PRM module */ u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(prm_base + inst + reg); + return readl_relaxed(prm_base + inst + reg); } /* Write into a register in a CM/PRM instance in the PRM module */ void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, prm_base + inst + reg); + writel_relaxed(val, prm_base + inst + reg); } /* Read-modify-write a register in a PRM module. Caller must lock */ @@ -649,6 +650,8 @@ struct pwrdm_ops omap4_pwrdm_operations = { .pwrdm_has_voltdm = omap4_check_vcvp, }; +static int omap44xx_prm_late_init(void); + /* * XXX document */ @@ -656,34 +659,29 @@ static struct prm_ll_data omap44xx_prm_ll_data = { .read_reset_sources = &omap44xx_prm_read_reset_sources, .was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old, .clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old, + .late_init = &omap44xx_prm_late_init, }; int __init omap44xx_prm_init(void) { - if (!cpu_is_omap44xx() && !soc_is_omap54xx() && !soc_is_dra7xx()) - return 0; + if (cpu_is_omap44xx()) + prm_features |= PRM_HAS_IO_WAKEUP; return prm_register(&omap44xx_prm_ll_data); } -static int __init omap44xx_prm_late_init(void) +static int omap44xx_prm_late_init(void) { - if (!cpu_is_omap44xx()) + if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; omap44xx_prm_enable_io_wakeup(); return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); } -omap_subsys_initcall(omap44xx_prm_late_init); static void __exit omap44xx_prm_exit(void) { - if (!cpu_is_omap44xx()) - return; - - /* Should never happen */ - WARN(prm_unregister(&omap44xx_prm_ll_data), - "%s: prm_ll_data function pointer mismatch\n", __func__); + prm_unregister(&omap44xx_prm_ll_data); } __exitcall(omap44xx_prm_exit); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index b4c4ab9c804..25e8b823211 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -62,6 +62,8 @@ static struct omap_prcm_irq_setup *prcm_irq_setup; /* prm_base: base virtual address of the PRM IP block */ void __iomem *prm_base; +u16 prm_features; + /* * prm_ll_data: function pointers to SoC-specific implementations of * common PRM functions @@ -330,12 +332,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) if (of_have_populated_dt()) { int irq = omap_prcm_event_to_irq("io"); - if (cpu_is_omap34xx()) - omap_pcs_legacy_init(irq, - omap3xxx_prm_reconfigure_io_chain); - else - omap_pcs_legacy_init(irq, - omap44xx_prm_reconfigure_io_chain); + omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain); } return 0; @@ -530,3 +527,11 @@ int __init of_prcm_init(void) return 0; } + +static int __init prm_late_init(void) +{ + if (prm_ll_data->late_init) + return prm_ll_data->late_init(); + return 0; +} +subsys_initcall(prm_late_init); diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 05fcf6de44e..69f0dd08629 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -49,7 +49,7 @@ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_prm_bases[part]); - return __raw_readl(_prm_bases[part] + inst + idx); + return readl_relaxed(_prm_bases[part] + inst + idx); } /* Write into a register in a PRM instance */ @@ -58,7 +58,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_prm_bases[part]); - __raw_writel(val, _prm_bases[part] + inst + idx); + writel_relaxed(val, _prm_bases[part] + inst + idx); } /* Read-modify-write a register in PRM. Caller must lock */ diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 446aa13511f..645a2a46b21 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -31,24 +31,24 @@ extern void __iomem *omap2_sms_base; static inline void sdrc_write_reg(u32 val, u16 reg) { - __raw_writel(val, OMAP_SDRC_REGADDR(reg)); + writel_relaxed(val, OMAP_SDRC_REGADDR(reg)); } static inline u32 sdrc_read_reg(u16 reg) { - return __raw_readl(OMAP_SDRC_REGADDR(reg)); + return readl_relaxed(OMAP_SDRC_REGADDR(reg)); } /* SMS global register get/set */ static inline void sms_write_reg(u32 val, u16 reg) { - __raw_writel(val, OMAP_SMS_REGADDR(reg)); + writel_relaxed(val, OMAP_SMS_REGADDR(reg)); } static inline u32 sms_read_reg(u16 reg) { - return __raw_readl(OMAP_SMS_REGADDR(reg)); + return readl_relaxed(OMAP_SMS_REGADDR(reg)); } extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms); diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 90729171464..ae3f1553158 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -103,9 +103,9 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force) * prm2xxx.c function */ if (cpu_is_omap2420()) - __raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP); + writel_relaxed(0xffff, OMAP2420_PRCM_VOLTSETUP); else - __raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP); + writel_relaxed(0xffff, OMAP2430_PRCM_VOLTSETUP); omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type); curr_perf_level = level; local_irq_restore(flags); diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index d7bc33f1534..1b91ef0c182 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -57,7 +57,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, /* * In OMAP4 the efuse registers are 24 bit aligned. - * A __raw_readl will fail for non-32 bit aligned address + * A readl_relaxed will fail for non-32 bit aligned address * and hence the 8-bit read and shift. */ if (cpu_is_omap44xx()) { diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c index 4bd09683623..ddf1818af22 100644 --- a/arch/arm/mach-omap2/sram.c +++ b/arch/arm/mach-omap2/sram.c @@ -70,16 +70,16 @@ static int is_sram_locked(void) if (OMAP2_DEVICE_TYPE_GP == omap_type()) { /* RAMFW: R/W access to all initiators for all qualifier sets */ if (cpu_is_omap242x()) { - __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ + writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ + writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ + writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ } if (cpu_is_omap34xx()) { - __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ - __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); - __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); + writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ + writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ + writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ + writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2); + writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); } return 0; } else diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 842b81f3195..43d03fbf4c0 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -546,15 +546,15 @@ static void __init realtime_counter_init(void) } /* Program numerator and denumerator registers */ - reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) & + reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) & NUMERATOR_DENUMERATOR_MASK; reg |= num; - __raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET); + writel_relaxed(reg, base + INCREMENTER_NUMERATOR_OFFSET); - reg = __raw_readl(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) & + reg = readl_relaxed(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) & NUMERATOR_DENUMERATOR_MASK; reg |= den; - __raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); + writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); arch_timer_freq = (rate / den) * num; set_cntfreq(); diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 49ac7977e03..267f204559c 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -462,7 +462,7 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode) val |= omap4_usec_to_val_scrm(tshut, OMAP4_DOWNTIME_SHIFT, OMAP4_DOWNTIME_MASK); - __raw_writel(val, OMAP4_SCRM_CLKSETUPTIME); + writel_relaxed(val, OMAP4_SCRM_CLKSETUPTIME); } /* OMAP4 specific voltage init functions */ @@ -584,7 +584,7 @@ static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm) val = i2c_data->loadbits << 25 | i2c_data->loadbits << 29; /* Write to SYSCTRL_PADCONF_WKUP_CTRL_I2C_2 to setup I2C pull */ - __raw_writel(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP + + writel_relaxed(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP + OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2)); /* HSSCLH can always be zero */ diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index d15c7bbab8e..97d6607d447 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -49,12 +49,12 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh) } /* sequence required to disable watchdog */ - __raw_writel(0xAAAA, base + OMAP_WDT_SPR); - while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) + writel_relaxed(0xAAAA, base + OMAP_WDT_SPR); + while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10) cpu_relax(); - __raw_writel(0x5555, base + OMAP_WDT_SPR); - while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) + writel_relaxed(0x5555, base + OMAP_WDT_SPR); + while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10) cpu_relax(); return 0; diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index 4887a2a4c69..3dffcb2d714 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -36,27 +36,33 @@ static int sirfsoc_reset_module(struct reset_controller_dev *rcdev, if (of_device_is_compatible(rcdev->of_node, "sirf,prima2-rstc")) { /* - * Writing 1 to this bit resets corresponding block. Writing 0 to this - * bit de-asserts reset signal of the corresponding block. - * datasheet doesn't require explicit delay between the set and clear - * of reset bit. it could be shorter if tests pass. + * Writing 1 to this bit resets corresponding block. + * Writing 0 to this bit de-asserts reset signal of the + * corresponding block. datasheet doesn't require explicit + * delay between the set and clear of reset bit. it could + * be shorter if tests pass. */ - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | (1 << reset_bit), + writel(readl(sirfsoc_rstc_base + + (reset_bit / 32) * 4) | (1 << reset_bit), sirfsoc_rstc_base + (reset_bit / 32) * 4); - msleep(10); - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~(1 << reset_bit), + msleep(20); + writel(readl(sirfsoc_rstc_base + + (reset_bit / 32) * 4) & ~(1 << reset_bit), sirfsoc_rstc_base + (reset_bit / 32) * 4); } else { /* * For MARCO and POLO - * Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR - * register de-asserts reset signal of the corresponding block. - * datasheet doesn't require explicit delay between the set and clear - * of reset bit. it could be shorter if tests pass. + * Writing 1 to SET register resets corresponding block. + * Writing 1 to CLEAR register de-asserts reset signal of the + * corresponding block. + * datasheet doesn't require explicit delay between the set and + * clear of reset bit. it could be shorter if tests pass. */ - writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); - msleep(10); - writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); + writel(1 << reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 8); + msleep(20); + writel(1 << reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); } mutex_unlock(&rstc_lock); diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index a028be23433..6aa22147cac 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -3,8 +3,6 @@ config ARCH_QCOM select ARCH_REQUIRE_GPIOLIB select ARM_GIC select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_SMP select QCOM_SCM if SMP help Support for Qualcomm's devicetree based systems. diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 1d5ee5c9a1d..960b8dd78c4 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -148,6 +148,21 @@ struct platform_device realview_cf_device = { }, }; +static struct resource realview_leds_resources[] = { + { + .start = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET, + .end = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET + 4, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device realview_leds_device = { + .name = "versatile-leds", + .id = -1, + .num_resources = ARRAY_SIZE(realview_leds_resources), + .resource = realview_leds_resources, +}; + static struct resource realview_i2c_resource = { .start = REALVIEW_I2C_BASE, .end = REALVIEW_I2C_BASE + SZ_4K - 1, diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 602ca5ec52c..13dc830ef46 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -37,6 +37,7 @@ struct machine_desc; extern struct platform_device realview_flash_device; extern struct platform_device realview_cf_device; +extern struct platform_device realview_leds_device; extern struct platform_device realview_i2c_device; extern struct mmci_platform_data realview_mmc0_plat_data; extern struct mmci_platform_data realview_mmc1_plat_data; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index c85ddb2a0ad..6bb070e8012 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -452,6 +452,7 @@ static void __init realview_eb_init(void) realview_flash_register(&realview_eb_flash_resource, 1); platform_device_register(&realview_i2c_device); platform_device_register(&char_lcd_device); + platform_device_register(&realview_leds_device); eth_device_register(); realview_usb_register(realview_eb_isp1761_resources); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index c5eade76461..173f2c15de4 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -367,6 +367,7 @@ static void __init realview_pb1176_init(void) realview_usb_register(realview_pb1176_isp1761_resources); platform_device_register(&pmu_device); platform_device_register(&char_lcd_device); + platform_device_register(&realview_leds_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index f4b0962578f..bde7e6b1fd4 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -347,6 +347,7 @@ static void __init realview_pb11mp_init(void) realview_eth_register(NULL, realview_pb11mp_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); + platform_device_register(&realview_leds_device); realview_usb_register(realview_pb11mp_isp1761_resources); platform_device_register(&pmu_device); diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 10a3e1d7689..4e57a859926 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -289,6 +289,7 @@ static void __init realview_pba8_init(void) realview_eth_register(NULL, realview_pba8_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); + platform_device_register(&realview_leds_device); realview_usb_register(realview_pba8_isp1761_resources); platform_device_register(&pmu_device); diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 9d75493e3f0..72c96caebef 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -385,6 +385,7 @@ static void __init realview_pbx_init(void) realview_eth_register(NULL, realview_pbx_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); + platform_device_register(&realview_leds_device); realview_usb_register(realview_pbx_isp1761_resources); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 40cf50b9940..45a7026e941 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -18,6 +18,18 @@ config PLAT_S3C24XX help Base platform code for any Samsung S3C24XX device +config S3C2410_COMMON_CLK + bool + help + Build the s3c2410 clock driver based on the common clock framework. + +config S3C2410_COMMON_DCLK + bool + select REGMAP_MMIO + help + Temporary symbol to build the dclk driver based on the common clock + framework. + menu "SAMSUNG S3C24XX SoCs Support" comment "S3C24XX SoCs" @@ -25,9 +37,9 @@ comment "S3C24XX SoCs" config CPU_S3C2410 bool "SAMSUNG S3C2410" default y + select COMMON_CLK select CPU_ARM920T - select CPU_LLSERIAL_S3C2410 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM @@ -38,8 +50,9 @@ config CPU_S3C2410 config CPU_S3C2412 bool "SAMSUNG S3C2412" + select COMMON_CLK select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 + select S3C2412_COMMON_CLK select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM help @@ -47,20 +60,19 @@ config CPU_S3C2412 config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" + select COMMON_CLK select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2416 SoC from the S3C24XX line config CPU_S3C2440 bool "SAMSUNG S3C2440" + select COMMON_CLK select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA help @@ -68,9 +80,9 @@ config CPU_S3C2440 config CPU_S3C2442 bool "SAMSUNG S3C2442" + select COMMON_CLK select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help @@ -83,27 +95,15 @@ config CPU_S3C244X config CPU_S3C2443 bool "SAMSUNG S3C2443" + select COMMON_CLK select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2443 SoC from the S3C24XX line # common code -config S3C2410_CLOCK - bool - help - Clock code for the S3C2410, and similar processors which - is currently includes the S3C2410, S3C2440, S3C2442. - -config S3C24XX_DCLK - bool - help - Clock code for supporting DCLK/CLKOUT on S3C24XX architectures - config S3C24XX_SMDK bool help @@ -158,28 +158,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -# low-level serial option nodes - -config CPU_LLSERIAL_S3C2410_ONLY - bool - default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 - -config CPU_LLSERIAL_S3C2440_ONLY - bool - default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 - -config CPU_LLSERIAL_S3C2410 - bool - help - Selected if there is an S3C2410 (or register compatible) serial - low-level implementation needed - -config CPU_LLSERIAL_S3C2440 - bool - help - Selected if there is an S3C2440 (or register compatible) serial - low-level implementation needed - config S3C24XX_PLL bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" depends on ARM_S3C24XX_CPUFREQ @@ -258,8 +236,8 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ - select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -340,7 +318,7 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select MACH_BAST_IDE - select S3C24XX_DCLK + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -359,6 +337,11 @@ config S3C2412_PM_SLEEP if CPU_S3C2412 +config S3C2412_COMMON_CLK + bool + help + Build the s3c2412 clock driver based on the common clock framework. + config CPU_S3C2412_ONLY bool depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ @@ -519,8 +502,8 @@ comment "S3C2440 Boards" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select HAVE_PATA_PLATFORM + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help @@ -558,9 +541,9 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST @@ -629,9 +612,9 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 - select S3C24XX_DCLK select S3C24XX_PWM select S3C_DEV_NAND help @@ -641,11 +624,11 @@ endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 -config S3C2443_COMMON +config S3C2443_COMMON_CLK bool help - Common code for the S3C2443 and similar processors, which includes - the S3C2416 and S3C2450. + Temporary symbol to build the clock driver based on the common clock + framework. config S3C2443_DMA bool diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 7f54e5b954c..2235d0d3b38 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -21,22 +21,22 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o clock-s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o # PM @@ -44,16 +44,13 @@ obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o # common code -obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_S3C24XX_DMA) += dma.o -obj-$(CONFIG_S3C2410_CLOCK) += clock-s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o -obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o # diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c deleted file mode 100644 index 1edd9b2369c..00000000000 --- a/arch/arm/mach-s3c24xx/clock-dclk.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (c) 2004-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX - definitions for DCLK and CLKOUT registers - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* clocks that could be registered by external code */ - -static int s3c24xx_dclk_enable(struct clk *clk, int enable) -{ - unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (enable) - dclkcon |= clk->ctrlbit; - else - dclkcon &= ~clk->ctrlbit; - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} - -static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long dclkcon; - unsigned int uclk; - - if (parent == &clk_upll) - uclk = 1; - else if (parent == &clk_p) - uclk = 0; - else - return -EINVAL; - - clk->parent = parent; - - dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; - } else { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; - } - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} -static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate) -{ - unsigned long div; - - if ((rate == 0) || !clk->parent) - return 0; - - div = clk_get_rate(clk->parent) / rate; - if (div < 2) - div = 2; - else if (div > 16) - div = 16; - - return div; -} - -static unsigned long s3c24xx_round_dclk_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return 0; - - return clk_get_rate(clk->parent) / div; -} - -static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate) -{ - unsigned long mask, data, div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return -EINVAL; - - if (clk == &s3c24xx_dclk0) { - mask = S3C2410_DCLKCON_DCLK0_DIV_MASK | - S3C2410_DCLKCON_DCLK0_CMP_MASK; - data = S3C2410_DCLKCON_DCLK0_DIV(div) | - S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2); - } else if (clk == &s3c24xx_dclk1) { - mask = S3C2410_DCLKCON_DCLK1_DIV_MASK | - S3C2410_DCLKCON_DCLK1_CMP_MASK; - data = S3C2410_DCLKCON_DCLK1_DIV(div) | - S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2); - } else - return -EINVAL; - - clk->rate = clk_get_rate(clk->parent) / div; - __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data), - S3C24XX_DCLKCON); - return clk->rate; -} -static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long mask; - unsigned long source; - - /* calculate the MISCCR setting for the clock */ - - if (parent == &clk_mpll) - source = S3C2410_MISCCR_CLK0_MPLL; - else if (parent == &clk_upll) - source = S3C2410_MISCCR_CLK0_UPLL; - else if (parent == &clk_f) - source = S3C2410_MISCCR_CLK0_FCLK; - else if (parent == &clk_h) - source = S3C2410_MISCCR_CLK0_HCLK; - else if (parent == &clk_p) - source = S3C2410_MISCCR_CLK0_PCLK; - else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) - source = S3C2410_MISCCR_CLK0_DCLK0; - else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) - source = S3C2410_MISCCR_CLK0_DCLK0; - else - return -EINVAL; - - clk->parent = parent; - - if (clk == &s3c24xx_clkout0) - mask = S3C2410_MISCCR_CLK0_MASK; - else { - source <<= 4; - mask = S3C2410_MISCCR_CLK1_MASK; - } - - s3c2410_modify_misccr(mask, source); - return 0; -} - -/* external clock definitions */ - -static struct clk_ops dclk_ops = { - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, -}; - -struct clk s3c24xx_dclk0 = { - .name = "dclk0", - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -struct clk s3c24xx_dclk1 = { - .name = "dclk1", - .ctrlbit = S3C2410_DCLKCON_DCLK1EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -static struct clk_ops clkout_ops = { - .set_parent = s3c24xx_clkout_setparent, -}; - -struct clk s3c24xx_clkout0 = { - .name = "clkout0", - .ops = &clkout_ops, -}; - -struct clk s3c24xx_clkout1 = { - .name = "clkout1", - .ops = &clkout_ops, -}; diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c deleted file mode 100644 index d1afcf9252d..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410,S3C2440,S3C2442 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -int s3c2410_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - /* ensure none of the special function bits set */ - clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2410_upll_enable(struct clk *clk, int enable) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long orig = clkslow; - - if (enable) - clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; - else - clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - - __raw_writel(clkslow, S3C2410_CLKSLOW); - - /* if we started the UPLL, then allow to settle */ - - if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) - udelay(200); - - return 0; -} - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI, - } -}; - -static struct clk clk_lcd = { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, -}; - -static struct clk clk_gpio = { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, -}; - -static struct clk clk_usb_host = { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, -}; - -static struct clk clk_usb_device = { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, -}; - -static struct clk clk_timers = { - .name = "timers", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, -}; - -struct clk s3c24xx_clk_uart0 = { - .name = "uart", - .devname = "s3c2410-uart.0", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, -}; - -struct clk s3c24xx_clk_uart1 = { - .name = "uart", - .devname = "s3c2410-uart.1", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, -}; - -struct clk s3c24xx_clk_uart2 = { - .name = "uart", - .devname = "s3c2410-uart.2", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, -}; - -static struct clk clk_rtc = { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, -}; - -static struct clk clk_watchdog = { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, -}; - -static struct clk clk_usb_bus_host = { - .name = "usb-bus-host", - .parent = &clk_usb_bus, -}; - -static struct clk clk_usb_bus_gadget = { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, -}; - -static struct clk *init_clocks[] = { - &clk_lcd, - &clk_gpio, - &clk_usb_host, - &clk_usb_device, - &clk_timers, - &s3c24xx_clk_uart0, - &s3c24xx_clk_uart1, - &s3c24xx_clk_uart2, - &clk_rtc, - &clk_watchdog, - &clk_usb_bus_host, - &clk_usb_bus_gadget, -}; - -/* s3c2410_baseclk_add() - * - * Add all the clocks used by the s3c2410 or compatible CPUs - * such as the S3C2440 and S3C2442. - * - * We cannot use a system device as we are needed before any - * of the init-calls that initialise the devices are actually - * done. -*/ - -int __init s3c2410_baseclk_add(void) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *xtal; - int ret; - int ptr; - - clk_upll.enable = s3c2410_upll_enable; - - if (s3c24xx_register_clock(&clk_usb_bus) < 0) - printk(KERN_ERR "failed to register usb bus clock\n"); - - /* register clocks from clock array */ - - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) { - struct clk *clkp = init_clocks[ptr]; - - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - /* show the clock-slow value */ - - xtal = clk_get(NULL, "xtal"); - - printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", - print_mhz(clk_get_rate(xtal) / - ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), - (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", - (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", - (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); - - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c deleted file mode 100644 index 192a5b2550b..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ /dev/null @@ -1,760 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/clock.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412,S3C2413 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -static int s3c2412_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2412_upll_enable(struct clk *clk, int enable) -{ - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - unsigned long orig = upllcon; - - if (!enable) - upllcon |= S3C2412_PLLCON_OFF; - else - upllcon &= ~S3C2412_PLLCON_OFF; - - __raw_writel(upllcon, S3C2410_UPLLCON); - - /* allow ~150uS for the PLL to settle and lock */ - - if (enable && (orig & S3C2412_PLLCON_OFF)) - udelay(150); - - return 0; -} - -/* clock selections */ - -static struct clk clk_erefclk = { - .name = "erefclk", -}; - -static struct clk clk_urefclk = { - .name = "urefclk", -}; - -static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_urefclk) - clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL; - else if (parent == &clk_upll) - clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_usysclk = { - .name = "usysclk", - .parent = &clk_xtal, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_usysclk, - }, -}; - -static struct clk clk_mrefclk = { - .name = "mrefclk", - .parent = &clk_xtal, -}; - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_xtal, -}; - -static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_USBCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - if (div > 2) - div = 2; - - return parent_rate / div; -} - -static unsigned long s3c2412_getrate_usbsrc(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1); -} - -static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_usbsrc(clk, rate); - - if ((parent_rate / rate) == 2) - clkdivn |= S3C2412_CLKDIVN_USB48DIV; - else - clkdivn &= ~S3C2412_CLKDIVN_USB48DIV; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_usbsrc = { - .name = "usbsrc", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_usbsrc, - .set_rate = s3c2412_setrate_usbsrc, - .round_rate = s3c2412_roundrate_usbsrc, - .set_parent = s3c2412_setparent_usbsrc, - }, -}; - -static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_mdivclk) - clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_msysclk = { - .name = "msysclk", - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_msysclk, - }, -}; - -static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - unsigned long clkdiv; - unsigned long dvs; - - /* Note, we current equate fclk andf msysclk for S3C2412 */ - - if (parent == &clk_msysclk || parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2412_CLKDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - /* update this under irq lockdown, clkdivn is not protected - * by the clock system. */ - - local_irq_save(flags); - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - clkdiv &= ~S3C2412_CLKDIVN_DVSEN; - clkdiv |= dvs; - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - local_irq_restore(flags); - - return 0; -} - -static struct clk clk_armclk = { - .name = "armclk", - .parent = &clk_msysclk, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_armclk, - }, -}; - -/* these next clocks have an divider immediately after them, - * so we can register them with their divider and leave out the - * intermediate clock stage -*/ -static unsigned long s3c2412_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations as they cancel out */ - - div = (rate / parent_rate); - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / div; -} - -static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_uart(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_UARTDIV_MASK; - div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_uart = { - .name = "uartclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_uart, - .set_rate = s3c2412_setrate_uart, - .set_parent = s3c2412_setparent_uart, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_i2s(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_I2SDIV_MASK; - div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_i2s = { - .name = "i2sclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_i2s, - .set_rate = s3c2412_setrate_i2s, - .set_parent = s3c2412_setparent_i2s, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} -static unsigned long s3c2412_getrate_cam(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_CAMDIV_MASK; - div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_cam = { - .name = "camif-upll", /* same as 2440 name */ - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_cam, - .set_rate = s3c2412_setrate_cam, - .set_parent = s3c2412_setparent_cam, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SPI, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma.0", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA0, - }, { - .name = "dma.1", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA1, - }, { - .name = "dma.2", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA2, - }, { - .name = "dma.3", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA3, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_LCDC, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBD, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_PWMT, - }, { - .name = "uart", - .devname = "s3c2412-uart.0", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2412-uart.1", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2412-uart.2", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART2, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_DEV48, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_HOST48, - } -}; - -/* clocks to add where we need to check their parentage */ - -struct clk_init { - struct clk *clk; - unsigned int bit; - struct clk *src_0; - struct clk *src_1; -}; - -static struct clk_init clks_src[] __initdata = { - { - .clk = &clk_usysclk, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_urefclk, - .src_1 = &clk_upll, - }, { - .clk = &clk_i2s, - .bit = S3C2412_CLKSRC_I2SCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_cam, - .bit = S3C2412_CLKSRC_CAMCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - }, { - .clk = &clk_msysclk, - .bit = S3C2412_CLKSRC_MSYSCLK_MPLL, - .src_0 = &clk_mdivclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_uart, - .bit = S3C2412_CLKSRC_UARTCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_usbsrc, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - /* here we assume OM[4] select xtal */ - }, { - .clk = &clk_erefclk, - .bit = S3C2412_CLKSRC_EREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, { - .clk = &clk_urefclk, - .bit = S3C2412_CLKSRC_UREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, -}; - -/* s3c2412_clk_initparents - * - * Initialise the parents for the clocks that we get at start-time -*/ - -static void __init s3c2412_clk_initparents(void) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - struct clk_init *cip = clks_src; - struct clk *src; - int ptr; - int ret; - - for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) { - ret = s3c24xx_register_clock(cip->clk); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - cip->clk->name, ret); - } - - src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0; - - printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name); - clk_set_parent(cip->clk, src); - } -} - -/* clocks to add straight away */ - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_usb_bus, - &clk_mrefclk, - &clk_armclk, -}; - -static struct clk_lookup s3c2412_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk), -}; - -int __init s3c2412_baseclk_add(void) -{ - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - unsigned int dvs; - struct clk *clkp; - int ret; - int ptr; - - clk_upll.enable = s3c2412_upll_enable; - clk_usb_bus.parent = &clk_usbsrc; - clk_usb_bus.rate = 0x0; - - clk_f.parent = &clk_msysclk; - - s3c2412_clk_initparents(); - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* set the dvs state according to what we got at boot time */ - - dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN; - - if (dvs) - clk_armclk.parent = &clk_h; - - printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off"); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n"); - - /* for the moment, let's use the UPLL, and see if we can - * get 48MHz */ - - clk_set_parent(&clk_usysclk, &clk_upll); - clk_set_parent(&clk_usbsrc, &clk_usysclk); - clk_set_rate(&clk_usbsrc, 48*1000*1000); - } - - printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_upll)), - print_mhz(clk_get_rate(&clk_usb_bus))); - - /* register clocks from clock array */ - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2412_clkcon_enable(clkp, 0); - } - - clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup)); - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c deleted file mode 100644 index d421a72920a..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ /dev/null @@ -1,171 +0,0 @@ -/* linux/arch/arm/mach-s3c2416/clock.c - * - * Copyright (c) 2010 Simtec Electronics - * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org> - * - * S3C2416 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/clk.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> -#include <plat/pll.h> - -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> -#include <mach/regs-s3c2443-clock.h> - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[8] = { - [0] = 1, - [1] = 2, - [2] = 3, - [3] = 4, - [5] = 6, - [7] = 8, -}; - -static struct clksrc_clk hsspi_eplldiv = { - .clk = { - .name = "hsspi-eplldiv", - .parent = &clk_esysclk.clk, - .ctrlbit = (1 << 14), - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 }, -}; - -static struct clk *hsspi_sources[] = { - [0] = &hsspi_eplldiv.clk, - [1] = NULL, /* to fix */ -}; - -static struct clksrc_clk hsspi_mux = { - .clk = { - .name = "hsspi-if", - }, - .sources = &(struct clksrc_sources) { - .sources = hsspi_sources, - .nr_sources = ARRAY_SIZE(hsspi_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 }, -}; - -static struct clksrc_clk hsmmc_div[] = { - [0] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.0", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 }, - }, - [1] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, - }, -}; - -static struct clksrc_clk hsmmc_mux0 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 6), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[0].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, -}; - -static struct clksrc_clk hsmmc_mux1 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 12), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[1].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, -}; - -static struct clk hsmmc0_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2416_HCLKCON_HSMMC0, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &hsspi_eplldiv, - &hsspi_mux, - &hsmmc_div[0], - &hsmmc_div[1], - &hsmmc_mux0, - &hsmmc_mux1, -}; - -static struct clk_lookup s3c2416_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk), - /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */ - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk), -}; - -void __init s3c2416_init_clocks(int xtal) -{ - u32 epllcon = __raw_readl(S3C2443_EPLLCON); - u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4); - int ptr; - - /* s3c2416 EPLL compatible with s3c64xx */ - clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1); - - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2416_get_pll, - armdiv, ARRAY_SIZE(armdiv), - S3C2416_CLKDIV0_ARMDIV_MASK); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c24xx_register_clock(&hsmmc0_clk); - clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup)); - -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c deleted file mode 100644 index 5527226fd61..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/clock.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440 Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mutex.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* S3C2440 extended clock support */ - -static unsigned long s3c2440_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div = (parent_rate / rate) / 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2440_camif_upll_round(clk, rate); - - camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); - - if (rate != parent_rate) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static unsigned long s3c2440_camif_upll_getrate(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL)) - return parent_rate; - - camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK; - - return parent_rate / (camdivn + 1) / 2; -} - -/* Extra S3C2440 clocks */ - -static struct clk s3c2440_clk_cam = { - .name = "camif", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2440_clk_cam_upll = { - .name = "camif-upll", - .ops = &(struct clk_ops) { - .set_rate = s3c2440_camif_upll_setrate, - .get_rate = s3c2440_camif_upll_getrate, - .round_rate = s3c2440_camif_upll_round, - }, -}; - -static struct clk s3c2440_clk_ac97 = { - .name = "ac97", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_AC97, -}; - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) -{ - unsigned long ucon0, ucon1, ucon2, divisor; - - /* the fun of calculating the uart divisors on the s3c2440 */ - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) - divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; - else if (ucon1 != 0) - divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; - else if (ucon2 != 0) - divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; - else - /* manual calims 44, seems to be 9 */ - divisor = 9; - - return clk_get_rate(clk->parent) / divisor; -} - -static struct clk s3c2440_clk_fclk_n = { - .name = "fclk_n", - .parent = &clk_f, - .ops = &(struct clk_ops) { - .get_rate = s3c2440_fclk_n_getrate, - }, -}; - -static struct clk_lookup s3c2440_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), - CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0), - CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1), - CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2), - CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll), -}; - -static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2440_clk_cam.parent = clock_h; - s3c2440_clk_ac97.parent = clock_p; - s3c2440_clk_cam_upll.parent = clock_upll; - s3c24xx_register_clock(&s3c2440_clk_fclk_n); - - s3c24xx_register_clock(&s3c2440_clk_ac97); - s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_cam_upll); - clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); - - clk_disable(&s3c2440_clk_ac97); - clk_disable(&s3c2440_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_clk_add, -}; - -static __init int s3c24xx_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c24xx_clk_init); diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c deleted file mode 100644 index 76cd31f7804..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ /dev/null @@ -1,212 +0,0 @@ -/* linux/arch/arm/mach-s3c2443/clock.c - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2443 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/serial_core.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/cpu-freq.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -/* clock selections */ - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[16] = { - [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, - [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, - [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, - [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, - [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, - [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, - [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, - [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, -}; - -/* hsspi - * - * high-speed spi clock, sourced from esysclk -*/ - -static struct clksrc_clk clk_hsspi = { - .clk = { - .name = "hsspi-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_HSSPICLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - - -/* clk_hsmcc_div - * - * this clock is sourced from epll, and is fed through a divider, - * to a mux controlled by sclkcon where either it or a extclk can - * be fed to the hsmmc block -*/ - -static struct clksrc_clk clk_hsmmc_div = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, -}; - -static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2443_SCLKCON); - - clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT | - S3C2443_SCLKCON_HSMMCCLK_EPLL); - - if (parent == &clk_epll) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL; - else if (parent == &clk_ext) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT; - else - return -EINVAL; - - if (clk->usage > 0) { - __raw_writel(clksrc, S3C2443_SCLKCON); - } - - clk->parent = parent; - return 0; -} - -static int s3c2443_enable_hsmmc(struct clk *clk, int enable) -{ - return s3c2443_setparent_hsmmc(clk, clk->parent); -} - -static struct clk clk_hsmmc = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .parent = &clk_hsmmc_div.clk, - .enable = s3c2443_enable_hsmmc, - .ops = &(struct clk_ops) { - .set_parent = s3c2443_setparent_hsmmc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SDI, - }, { - .name = "spi", - .devname = "s3c2410-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SPI1, - } -}; - -/* clocks to add straight away */ - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_hsspi, - &clk_hsmmc_div, -}; - -static struct clk *clks[] __initdata = { - &clk_hsmmc, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk), -}; - -void __init s3c2443_init_clocks(int xtal) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ptr; - - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, - armdiv, ARRAY_SIZE(armdiv), - S3C2443_CLKDIV0_ARMDIV_MASK); - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c deleted file mode 100644 index 6d9b688c442..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c244x.c +++ /dev/null @@ -1,141 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c - * - * Copyright (c) 2004-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440/S3C2442 Common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long camdivn; - unsigned long dvs; - - if (parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2440_CAMDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - camdivn = __raw_readl(S3C2440_CAMDIVN); - camdivn &= ~S3C2440_CAMDIVN_DVSEN; - camdivn |= dvs; - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .ops = &(struct clk_ops) { - .set_parent = s3c2440_setparent_armclk, - }, -}; - -static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; - struct clk *clock_upll; - int ret; - - printk("S3C244X: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - - clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; - - ret = s3c24xx_register_clock(&clk_arm); - if (ret < 0) { - printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); - return ret; - } - - clock_upll = clk_get(NULL, "upll"); - if (IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); - return -ENOENT; - } - - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - spin_lock(&clocks_lock); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - spin_unlock(&clocks_lock); - } - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2440_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c2440_clk_init); - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c deleted file mode 100644 index 65d3eef7309..00000000000 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * Common code for SoCs starting with the S3C2443 - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> - - -static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) -{ - u32 ctrlbit = clk->ctrlbit; - u32 con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_HCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_p(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_PCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_SCLKCON, clk, enable); -} - -/* mpllref is a direct descendant of clk_xtal by default, but it is not - * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as - * such directly equating the two source clocks is impossible. - */ -static struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, -}; - -static struct clk *clk_epllref_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpllref, - [2] = &clk_xtal, - [3] = &clk_ext, -}; - -struct clksrc_clk clk_epllref = { - .clk = { - .name = "epllref", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_epllref_sources, - .nr_sources = ARRAY_SIZE(clk_epllref_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, -}; - -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ - -static struct clk *clk_sysclk_sources[] = { - [0] = &clk_epllref.clk, - [1] = &clk_epll, -}; - -struct clksrc_clk clk_esysclk = { - .clk = { - .name = "esysclk", - .parent = &clk_epll, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_sysclk_sources, - .nr_sources = ARRAY_SIZE(clk_sysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, -}; - -static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV0); - - div &= S3C2443_CLKDIV0_EXTDIV_MASK; - div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ - - return parent_rate / (div + 1); -} - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_mpllref, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_getrate_mdivclk, - }, -}; - -static struct clk *clk_msysclk_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpll, - [2] = &clk_mdivclk, - [3] = &clk_mpllref, -}; - -static struct clksrc_clk clk_msysclk = { - .clk = { - .name = "msysclk", - .parent = &clk_xtal, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_msysclk_sources, - .nr_sources = ARRAY_SIZE(clk_msysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, -}; - -/* prediv - * - * this divides the msysclk down to pass to h/p/etc. - */ - -static unsigned long s3c2443_prediv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; - - return rate / (clkdiv0 + 1); -} - -static struct clk clk_prediv = { - .name = "prediv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_prediv_getrate, - }, -}; - -/* hclk divider - * - * divides the prediv and provides the hclk. - */ - -static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_h_ops = { - .get_rate = s3c2443_hclkdiv_getrate, -}; - -/* pclk divider - * - * divides the hclk and provides the pclk. - */ - -static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0); - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_p_ops = { - .get_rate = s3c2443_pclkdiv_getrate, -}; - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. -*/ - -static unsigned int *armdiv; -static int nr_armdiv; -static int armdivmask; - -static unsigned long s3c2443_armclk_roundrate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned best = 256; /* bigger than any value */ - unsigned div; - int ptr; - - if (!nr_armdiv) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) - best = div; - } - } - - return parent / best; -} - -static unsigned long s3c2443_armclk_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkcon0; - int val; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= armdivmask; - val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT; - - return rate / armdiv[val]; -} - -static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned div; - unsigned best = 256; /* bigger than any value */ - int ptr; - int val = -1; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) { - best = div; - val = ptr; - } - } - } - - if (val >= 0) { - unsigned long clkcon0; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= ~armdivmask; - clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; - __raw_writel(clkcon0, S3C2443_CLKDIV0); - } - - return (val == -1) ? -EINVAL : 0; -} - -static struct clk clk_armdiv = { - .name = "armdiv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .round_rate = s3c2443_armclk_roundrate, - .get_rate = s3c2443_armclk_getrate, - .set_rate = s3c2443_armclk_setrate, - }, -}; - -/* armclk - * - * this is the clock fed into the ARM core itself, from armdiv or from hclk. - */ - -static struct clk *clk_arm_sources[] = { - [0] = &clk_armdiv, - [1] = &clk_h, -}; - -static struct clksrc_clk clk_arm = { - .clk = { - .name = "armclk", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_arm_sources, - .nr_sources = ARRAY_SIZE(clk_arm_sources), - }, - .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, -}; - -/* usbhost - * - * usb host bus-clock, usually 48MHz to provide USB bus clock timing -*/ - -static struct clksrc_clk clk_usb_bus_host = { - .clk = { - .name = "usb-bus-host-parent", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - -/* common clksrc clocks */ - -static struct clksrc_clk clksrc_clks[] = { - { - /* camera interface bus-clock, divided down from esysclk */ - .clk = { - .name = "camif-upll", /* same as 2440 name */ - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, - }, { - .clk = { - .name = "display-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, - }, -}; - -static struct clksrc_clk clk_esys_uart = { - /* ART baud-rate clock sourced from esysclk via a divisor */ - .clk = { - .name = "uartclk", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, -}; - -static struct clk clk_i2s_ext = { - .name = "i2s-ext", -}; - -/* i2s_eplldiv - * - * This clock is the output from the I2S divisor of ESYSCLK, and is separate - * from the mux that comes after it (cannot merge into one single clock) -*/ - -static struct clksrc_clk clk_i2s_eplldiv = { - .clk = { - .name = "i2s-eplldiv", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, -}; - -/* i2s-ref - * - * i2s bus reference clock, selectable from external, esysclk or epllref - * - * Note, this used to be two clocks, but was compressed into one. -*/ - -static struct clk *clk_i2s_srclist[] = { - [0] = &clk_i2s_eplldiv.clk, - [1] = &clk_i2s_ext, - [2] = &clk_epllref.clk, - [3] = &clk_epllref.clk, -}; - -static struct clksrc_clk clk_i2s = { - .clk = { - .name = "i2s-if", - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - - }, - .sources = &(struct clksrc_sources) { - .sources = clk_i2s_srclist, - .nr_sources = ARRAY_SIZE(clk_i2s_srclist), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "iis", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIS, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIC, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA0, - }, { - .name = "dma.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA1, - }, { - .name = "dma.2", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA2, - }, { - .name = "dma.3", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA3, - }, { - .name = "dma.4", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA4, - }, { - .name = "dma.5", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA5, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBD, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_LCDC, - - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_PWMT, - }, { - .name = "cfc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_CFC, - }, { - .name = "ssmc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_SSMC, - }, { - .name = "uart", - .devname = "s3c2440-uart.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2440-uart.1", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2440-uart.2", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART2, - }, { - .name = "uart", - .devname = "s3c2440-uart.3", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART3, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_WDT, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_AC97, - }, { - .name = "nand", - .parent = &clk_h, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus_host.clk, - } -}; - -static struct clk hsmmc1_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, -}; - -static struct clk hsspi_clk = { - .name = "spi", - .devname = "s3c2443-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_HSSPI, -}; - -/* EPLLCON compatible enough to get on/off information */ - -void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - struct clk *xtal_clk; - unsigned long xtal; - unsigned long pll; - int ptr; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - pll = get_mpll(mpllcon, xtal); - clk_msysclk.clk.rate = pll; - clk_mpll.rate = pll; - - printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)), - print_mhz(clk_get_rate(&clk_h)), - print_mhz(clk_get_rate(&clk_p))); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) - s3c_set_clksrc(&clksrc_clks[ptr], true); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); - } - - printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(clk_get_rate(&clk_epll)), - print_mhz(clk_get_rate(&clk_usb_bus))); -} - -static struct clk *clks[] __initdata = { - &clk_prediv, - &clk_mpllref, - &clk_mdivclk, - &clk_ext, - &clk_epll, - &clk_usb_bus, - &clk_armdiv, - &hsmmc1_clk, - &hsspi_clk, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_i2s_eplldiv, - &clk_i2s, - &clk_usb_bus_host, - &clk_epllref, - &clk_esysclk, - &clk_msysclk, - &clk_arm, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk), -}; - -void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask) -{ - int ptr; - - armdiv = divs; - nr_armdiv = nr_divs; - armdivmask = divmask; - - /* s3c2443 parents h clock from prediv */ - clk_h.parent = &clk_prediv; - clk_h.ops = &clk_h_ops; - - /* and p clock from h clock */ - clk_p.parent = &clk_h; - clk_p.ops = &clk_p_ops; - - clk_usb_bus.parent = &clk_usb_bus_host.clk; - clk_epll.parent = &clk_epllref.clk; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - /* See s3c2443/etc notes on disabling clocks at init time */ - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); - - s3c2443_common_setup_clocks(get_mpll); -} diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 1bc8e73c94f..c0763b83774 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -53,6 +53,7 @@ #include <plat/cpu-freq.h> #include <plat/pll.h> #include <plat/pwm-core.h> +#include <plat/watchdog-reset.h> #include "common.h" @@ -73,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410000, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410_init, .name = name_s3c2410 @@ -82,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410002, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410a_init, .name = name_s3c2410a @@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440000, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440 @@ -100,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440001, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440a @@ -109,7 +106,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aaa, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442 @@ -118,7 +114,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aab, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442b @@ -127,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -136,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412003, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -145,7 +138,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32450003, .idmask = 0xffffffff, .map_io = s3c2416_map_io, - .init_clocks = s3c2416_init_clocks, .init_uarts = s3c2416_init_uarts, .init = s3c2416_init, .name = name_s3c2416, @@ -154,7 +146,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32443001, .idmask = 0xffffffff, .map_io = s3c2443_map_io, - .init_clocks = s3c2443_init_clocks, .init_uarts = s3c2443_init_uarts, .init = s3c2443_init, .name = name_s3c2443, @@ -316,21 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { }, }; -/* initialise all the clocks */ - -void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, - unsigned long hclk, - unsigned long pclk) -{ - clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON), - clk_xtal.rate); - - clk_mpll.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; -} - #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) static struct resource s3c2410_dma_resource[] = { @@ -534,3 +510,62 @@ struct platform_device s3c2443_device_dma = { }, }; #endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410) +void __init s3c2410_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2412 +void __init s3c2412_init_clocks(int xtal) +{ + s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#ifdef CONFIG_CPU_S3C2416 +void __init s3c2416_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440) +void __init s3c2440_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442) +void __init s3c2442_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2443 +void __init s3c2443_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \ + defined(CONFIG_CPU_S3C2442) +static struct resource s3c2410_dclk_resource[] = { + [0] = DEFINE_RES_MEM(0x56000084, 0x4), +}; + +struct platform_device s3c2410_device_dclk = { + .name = "s3c2410-dclk", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dclk_resource), + .resource = s3c2410_dclk_resource, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index e46c1041721..ac3ff12a060 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -67,16 +67,15 @@ extern struct syscore_ops s3c2416_irq_syscore_ops; #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) extern void s3c244x_map_io(void); extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c244x_init_clocks(int xtal); extern void s3c244x_restart(enum reboot_mode mode, const char *cmd); #else -#define s3c244x_init_clocks NULL #define s3c244x_init_uarts NULL #endif #ifdef CONFIG_CPU_S3C2440 extern int s3c2440_init(void); extern void s3c2440_map_io(void); +extern void s3c2440_init_clocks(int xtal); extern void s3c2440_init_irq(void); #else #define s3c2440_init NULL @@ -86,6 +85,7 @@ extern void s3c2440_init_irq(void); #ifdef CONFIG_CPU_S3C2442 extern int s3c2442_init(void); extern void s3c2442_map_io(void); +extern void s3c2442_init_clocks(int xtal); extern void s3c2442_init_irq(void); #else #define s3c2442_init NULL @@ -114,4 +114,21 @@ extern struct platform_device s3c2412_device_dma; extern struct platform_device s3c2440_device_dma; extern struct platform_device s3c2443_device_dma; +extern struct platform_device s3c2410_device_dclk; + +#ifdef CONFIG_S3C2410_COMMON_CLK +void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2412_COMMON_CLK +void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2443_COMMON_CLK +void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif + #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index 2a0aa5684e7..d4d9514335f 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -14,6 +14,7 @@ #include <linux/errno.h> #include <linux/cpufreq.h> #include <linux/io.h> +#include <linux/clk.h> #include <mach/map.h> #include <mach/regs-clock.h> @@ -60,5 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) */ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) { - __raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON); + if (!IS_ERR(cfg->mpll)) + clk_set_rate(cfg->mpll, cfg->pll.frequency); } diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S deleted file mode 100644 index 2f39737544c..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ /dev/null @@ -1,101 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Copyright (C) 2005 Simtec Electronics - * - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <mach/map.h> -#include <mach/regs-gpio.h> -#include <linux/serial_s3c.h> - -#define S3C2410_UART1_OFF (0x4000) -#define SHIFT_2440TXF (14-9) - - .macro addruart, rp, rv, tmp - ldr \rp, = S3C24XX_PA_UART - ldr \rv, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -#endif - .endm - - .macro fifo_full_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 1004f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? -1004: - ldr \rd, [\rx, # S3C2410_UFSTAT] - moveq \rd, \rd, lsr #SHIFT_2440TXF - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - - .macro fifo_full_s3c2410 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - -/* fifo level reading */ - - .macro fifo_level_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 10000f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? - -10000: - ldr \rd, [\rx, # S3C2410_UFSTAT] - andne \rd, \rd, #S3C2410_UFSTAT_TXMASK - andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - - .macro fifo_level_s3c2410 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - and \rd, \rd, #S3C2410_UFSTAT_TXMASK - .endm - -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) -#define fifo_full fifo_full_s3c24xx -#define fifo_level fifo_level_s3c24xx -#endif - -/* include the reset of the code which will do the work */ - -#include <debug/samsung.S> diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h index 3415b60082d..3db6c10de02 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h @@ -42,24 +42,6 @@ #define S3C2410_CLKCON_IIS (1<<17) #define S3C2410_CLKCON_SPI (1<<18) -/* DCLKCON register addresses in gpio.h */ - -#define S3C2410_DCLKCON_DCLK0EN (1<<0) -#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) -#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) -#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) -#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) -#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4) -#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8) - -#define S3C2410_DCLKCON_DCLK1EN (1<<16) -#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) -#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) -#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24) -#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24) - #define S3C2410_CLKDIVN_PDIVN (1<<0) #define S3C2410_CLKDIVN_HDIVN (1<<1) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index c2ef016032a..c6583cfa583 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -457,9 +457,6 @@ /* miscellaneous control */ #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) -#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) - -#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) /* see clock.h for dclk definitions */ diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 8ac9554aa99..5157e250dd1 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = { static void __init amlm5900_map_io(void) { s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init amlm5900_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + #ifdef CONFIG_FB_S3C2410 static struct s3c2410fb_display __initdata amlm5900_lcd_info = { .width = 160, @@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900") .map_io = amlm5900_map_io, .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, - .init_time = samsung_timer_init, + .init_time = amlm5900_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 81a270af233..e053581cab0 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -46,7 +46,6 @@ #include <net/ax88796.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> @@ -352,6 +351,7 @@ static struct platform_device anubis_device_sm501 = { /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, @@ -364,14 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = { &anubis_device_sm501, }; -static struct clk *anubis_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - /* I2C devices. */ static struct i2c_board_info anubis_i2c_devs[] __initdata = { @@ -394,23 +386,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { static void __init anubis_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks)); - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -428,6 +404,12 @@ static void __init anubis_map_io(void) } } +static void __init anubis_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init anubis_init(void) { s3c_i2c0_set_platdata(NULL); @@ -447,6 +429,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .map_io = anubis_map_io, .init_machine = anubis_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = anubis_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index d8f6bb1096c..9db768f448a 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -45,7 +45,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = { static void __init at2440evb_map_io(void) { s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init at2440evb_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); +} + static void __init at2440evb_init(void) { s3c24xx_fb_set_platdata(&at2440evb_fb_info); @@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .map_io = at2440evb_map_io, .init_machine = at2440evb_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = at2440evb_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index e371ff53a40..f9112b801a3 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -51,7 +51,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> @@ -523,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = { // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 static struct platform_device *bast_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -537,14 +537,6 @@ static struct platform_device *bast_devices[] __initdata = { &bast_sio, }; -static struct clk *bast_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata bast_cpufreq = { .refresh = 7800, /* 7.8usec */ .auto_io = 1, @@ -558,29 +550,19 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { static void __init bast_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - s3c_hwmon_set_platdata(&bast_hwmon_info); s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init bast_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init bast_init(void) { register_syscore_ops(&bast_pm_syscore_ops); @@ -608,6 +590,6 @@ MACHINE_START(BAST, "Simtec-BAST") .map_io = bast_map_io, .init_irq = s3c2410_init_irq, .init_machine = bast_init, - .init_time = samsung_timer_init, + .init_time = bast_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index dc4db849f0f..fc3a08d0cb3 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = { static void __init gta02_map_io(void) { s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -585,6 +584,11 @@ static void __init gta02_machine_init(void) regulator_has_full_constraints(); } +static void __init gta02_init_time(void) +{ + s3c2442_init_clocks(12000000); + samsung_timer_init(); +} MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ @@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .map_io = gta02_map_io, .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, - .init_time = samsung_timer_init, + .init_time = gta02_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index e453acd92cb..fbf5487ae5d 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -57,7 +57,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> @@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = { static void __init h1940_map_io(void) { s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -662,6 +660,12 @@ static void __init h1940_map_io(void) WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); } +static void __init h1940_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init h1940_reserve(void) { @@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940") .reserve = h1940_reserve, .init_irq = s3c2410_init_irq, .init_machine = h1940_init, - .init_time = samsung_timer_init, + .init_time = h1940_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 5faa7239e7d..e81ea82c55f 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -507,11 +507,16 @@ static struct syscore_ops jive_pm_syscore_ops = { static void __init jive_map_io(void) { s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init jive_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void jive_power_off(void) { printk(KERN_INFO "powering system down...\n"); @@ -665,6 +670,6 @@ MACHINE_START(JIVE, "JIVE") .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .init_time = samsung_timer_init, + .init_time = jive_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 9e57fd9f4f3..5cc40ec1d25 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -54,7 +54,6 @@ #include <linux/mtd/partitions.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = { static void __init mini2440_map_io(void) { s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init mini2440_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + /* * mini2440_features string * @@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440") .map_io = mini2440_map_io, .init_machine = mini2440_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = mini2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 4cccaad3484..3ac2a54348d 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -45,7 +45,6 @@ #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -535,11 +534,16 @@ static void __init n30_map_io(void) { s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); n30_hwinit(); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init n30_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* GPB3 is the line that controls the pull-up for the USB D+ line */ static void __init n30_init(void) @@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_time = samsung_timer_init, + .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, @@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .init_time = samsung_timer_init, + .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 3066851f584..c82c281ce35 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -42,7 +42,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -135,13 +134,18 @@ static void __init nexcoder_sensorboard_init(void) static void __init nexcoder_map_io(void) { s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); nexcoder_sensorboard_init(); } +static void __init nexcoder_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init nexcoder_init(void) { s3c_i2c0_set_platdata(NULL); @@ -154,6 +158,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .map_io = nexcoder_map_io, .init_machine = nexcoder_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = nexcoder_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index a4ae4bb3666..189147b80ec 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -40,7 +40,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> @@ -344,20 +343,13 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = { /* Standard Osiris devices */ static struct platform_device *osiris_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_i2c0, &s3c_device_wdt, &s3c_device_nand, &osiris_pcmcia, }; -static struct clk *osiris_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata osiris_cpufreq = { .refresh = 7800, /* refresh period is 7.8usec */ .auto_io = 1, @@ -368,23 +360,7 @@ static void __init osiris_map_io(void) { unsigned long flags; - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks)); - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -408,6 +384,12 @@ static void __init osiris_map_io(void) local_irq_restore(flags); } +static void __init osiris_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init osiris_init(void) { register_syscore_ops(&osiris_pm_syscore_ops); @@ -429,6 +411,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .map_io = osiris_map_io, .init_irq = s3c2440_init_irq, .init_machine = osiris_init, - .init_time = samsung_timer_init, + .init_time = osiris_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index bdb3faac2d9..45833001186 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -30,7 +30,6 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/samsung-time.h> @@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = { static void __init otom11_map_io(void) { s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init otom11_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init otom11_init(void) { s3c_i2c0_set_platdata(NULL); @@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .map_io = otom11_map_io, .init_machine = otom11_init, .init_irq = s3c2410_init_irq, - .init_time = samsung_timer_init, + .init_time = otom11_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 8c12787a8fd..228c9094519 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup); static void __init qt2410_map_io(void) { s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); - s3c24xx_init_clocks(12*1000*1000); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init qt2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init qt2410_machine_init(void) { s3c_nand_set_platdata(&qt2410_nand_info); @@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410") .map_io = qt2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, - .init_time = samsung_timer_init, + .init_time = qt2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index afb784e934c..e2c6541909c 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -54,7 +54,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> @@ -710,6 +709,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = { }; static struct platform_device *rx1950_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, @@ -728,20 +728,9 @@ static struct platform_device *rx1950_devices[] __initdata = { &rx1950_leds, }; -static struct clk *rx1950_clocks[] __initdata = { - &s3c24xx_clkout0, - &s3c24xx_clkout1, -}; - static void __init rx1950_map_io(void) { - s3c24xx_clkout0.parent = &clk_h; - s3c24xx_clkout1.parent = &clk_f; - - s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks)); - s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -754,6 +743,12 @@ static void __init rx1950_map_io(void) s3c_pm_init(); } +static void __init rx1950_init_time(void) +{ + s3c2442_init_clocks(16934000); + samsung_timer_init(); +} + static void __init rx1950_init_machine(void) { int i; @@ -816,6 +811,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .reserve = rx1950_reserve, .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, - .init_time = samsung_timer_init, + .init_time = rx1950_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index e6535ce1bc5..6e749ec3a2e 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -46,7 +46,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> @@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = { static void __init rx3715_map_io(void) { s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init rx3715_init_time(void) +{ + s3c2440_init_clocks(16934000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init rx3715_reserve(void) { @@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .reserve = rx3715_reserve, .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, - .init_time = samsung_timer_init, + .init_time = rx3715_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 70f0900d4bc..e4dcb9aa2ca 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -18,7 +18,6 @@ #include <linux/clocksource.h> #include <linux/irqchip.h> #include <linux/of_platform.h> -#include <linux/serial_core.h> #include <linux/serial_s3c.h> #include <asm/mach/arch.h> @@ -29,48 +28,14 @@ #include "common.h" -/* - * The following lookup table is used to override device names when devices - * are registered from device tree. This is temporarily added to enable - * device tree support addition for the S3C2416 architecture. - * - * For drivers that require platform data to be provided from the machine - * file, a platform data pointer can also be supplied along with the - * devices names. Usually, the platform data elements that cannot be parsed - * from the device tree by the drivers (example: function pointers) are - * supplied. But it should be noted that this is a temporary mechanism and - * at some point, the drivers should be capable of parsing all the platform - * data from the device tree. - */ -static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, - "s3c2440-uart.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, - "s3c2440-uart.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, - "s3c2440-uart.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, - "s3c2440-uart.3", NULL), - OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, - "s3c-sdhci.0", NULL), - OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1, - "s3c-sdhci.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC, - "s3c2440-i2c.0", NULL), - {}, -}; - static void __init s3c2416_dt_map_io(void) { s3c24xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); } static void __init s3c2416_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - s3c2416_auxdata_lookup, NULL); - + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); s3c_pm_init(); } @@ -86,6 +51,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") .map_io = s3c2416_dt_map_io, .init_irq = irqchip_init, .init_machine = s3c2416_dt_machine_init, - .init_time = clocksource_of_init, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index f32924ee0e9..419fadd6e44 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = { static void __init smdk2410_map_io(void) { s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2410_init(void) { s3c_i2c0_set_platdata(NULL); @@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc .map_io = smdk2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, - .init_time = samsung_timer_init, + .init_time = smdk2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 233fe52d201..a38f8a049e2 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -106,11 +106,16 @@ static void __init smdk2413_fixup(struct tag *tags, char **cmdline, static void __init smdk2413_map_io(void) { s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2413_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ @@ -159,6 +164,6 @@ MACHINE_START(SMDK2413, "SMDK2413") .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2413_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index b3b54d8e141..fa6f30d2360 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -219,10 +219,15 @@ static struct platform_device *smdk2416_devices[] __initdata = { &s3c2443_device_dma, }; +static void __init smdk2416_init_time(void) +{ + s3c2416_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2416_map_io(void) { s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -257,6 +262,6 @@ MACHINE_START(SMDK2416, "SMDK2416") .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2416_init_time, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index d071dcfea54..5fb89c0ae17 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -38,7 +38,6 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = { static void __init smdk2440_map_io(void) { s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2440_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); +} + static void __init smdk2440_machine_init(void) { s3c24xx_fb_set_platdata(&smdk2440_fb_info); @@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440") .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 06c4d77de3a..ef5d5ea3318 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = { static void __init smdk2443_map_io(void) { s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2443_init_time(void) +{ + s3c2443_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2443_machine_init(void) { s3c_i2c0_set_platdata(NULL); @@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443") .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2443_init_time, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 4108b2f0ced..c616ca2d409 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = { static void __init tct_hammer_map_io(void) { s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init tct_hammer_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init tct_hammer_init(void) { s3c_i2c0_set_platdata(NULL); @@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .map_io = tct_hammer_map_io, .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, - .init_time = samsung_timer_init, + .init_time = tct_hammer_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 1cc5b1bd51c..f88c584c300 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -43,7 +43,6 @@ #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/samsung-time.h> @@ -286,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = { /* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -299,14 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = { &vr1000_led3, }; -static struct clk *vr1000_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static void vr1000_power_off(void) { gpio_direction_output(S3C2410_GPB(9), 1); @@ -314,29 +306,19 @@ static void vr1000_power_off(void) static void __init vr1000_map_io(void) { - /* initialise clock sources */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = NULL; - s3c24xx_dclk1.rate = 3692307; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks)); - pm_power_off = vr1000_power_off; s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init vr1000_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init vr1000_init(void) { s3c_i2c0_set_platdata(NULL); @@ -357,6 +339,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .map_io = vr1000_map_io, .init_machine = vr1000_init, .init_irq = s3c2410_init_irq, - .init_time = samsung_timer_init, + .init_time = vr1000_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 40868c0e0a6..6b706c91538 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -142,11 +142,16 @@ static void __init vstms_fixup(struct tag *tags, char **cmdline, static void __init vstms_map_io(void) { s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init vstms_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void __init vstms_init(void) { s3c_i2c0_set_platdata(NULL); @@ -162,6 +167,6 @@ MACHINE_START(VSTMS, "VSTMS") .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .init_time = samsung_timer_init, + .init_time = vstms_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 68ea5b7e5dc..b19256ec8d4 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -51,9 +51,6 @@ #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { - SAVE_ITEM(S3C2410_LOCKTIME), - SAVE_ITEM(S3C2410_CLKCON), - /* we restore the timings here, with the proviso that the board * brings the system up in an slower, or equal frequency setting * to the original system. @@ -69,18 +66,6 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_BANKCON3), SAVE_ITEM(S3C2410_BANKCON4), SAVE_ITEM(S3C2410_BANKCON5), - -#ifndef CONFIG_CPU_FREQ - SAVE_ITEM(S3C2410_CLKDIVN), - SAVE_ITEM(S3C2410_MPLLCON), - SAVE_ITEM(S3C2410_REFRESH), -#endif - SAVE_ITEM(S3C2410_UPLLCON), - SAVE_ITEM(S3C2410_CLKSLOW), -}; - -static struct sleep_save misc_save[] = { - SAVE_ITEM(S3C2410_DCLKCON), }; /* s3c_pm_check_resume_pin @@ -140,12 +125,10 @@ void s3c_pm_configure_extint(void) void s3c_pm_restore_core(void) { s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); } void s3c_pm_save_core(void) { - s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); } diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 04b58cb4988..7eab8882988 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -85,62 +85,6 @@ void __init s3c2410_map_io(void) void __init_or_cpufreq s3c2410_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -/* fake ARMCLK for use with cpufreq, etc. */ - -static struct clk s3c2410_armclk = { - .name = "armclk", - .parent = &clk_f, - .id = -1, -}; - -static struct clk_lookup s3c2410_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), -}; - -void __init s3c2410_init_clocks(int xtal) -{ - s3c24xx_register_baseclocks(xtal); - s3c2410_setup_clocks(); - s3c2410_baseclk_add(); - s3c24xx_register_clock(&s3c2410_armclk); - clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup)); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } struct bus_type s3c2410_subsys = { diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 657cbaca80a..d49f52fbc84 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -173,49 +173,6 @@ void __init s3c2412_map_io(void) void __init_or_cpufreq s3c2412_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2); - - clk_mpll.rate = fclk; - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); - hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c2412_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_register_baseclocks(xtal); - s3c2412_setup_clocks(); - s3c2412_baseclk_add(); } /* need to register the subsystem before we actually register the device, and diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 2c8adc02853..fb9da2b603a 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -53,117 +53,6 @@ #include "common.h" -/* S3C2442 extended clock support */ - -static unsigned long s3c2442_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - - if (div == 3) - return parent_rate / 3; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div /= 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2442_camif_upll_round(clk, rate); - - camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3; - - if (rate == parent_rate) { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL; - } else if ((parent_rate / rate) == 3) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3; - } else { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK; - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -/* Extra S3C2442 clocks */ - -static struct clk s3c2442_clk_cam = { - .name = "camif", - .id = -1, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2442_clk_cam_upll = { - .name = "camif-upll", - .id = -1, - .ops = &(struct clk_ops) { - .set_rate = s3c2442_camif_upll_setrate, - .round_rate = s3c2442_camif_upll_round, - }, -}; - -static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2442_clk_cam.parent = clock_h; - s3c2442_clk_cam_upll.parent = clock_upll; - - s3c24xx_register_clock(&s3c2442_clk_cam); - s3c24xx_register_clock(&s3c2442_clk_cam_upll); - - clk_disable(&s3c2442_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c2442_clk_add, -}; - -static __init int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); - - static struct device s3c2442_dev = { .bus = &s3c2442_subsys, }; diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index fe30ebb234d..4a64bcc9eb5 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -46,6 +46,7 @@ #include <plat/nand-core.h> #include <plat/watchdog-reset.h> +#include "common.h" #include "regs-dsc.h" static struct map_desc s3c244x_iodesc[] __initdata = { @@ -74,67 +75,11 @@ void __init s3c244x_map_io(void) s3c_nand_setname("s3c2440-nand"); s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; + s3c2410_device_dclk.name = "s3c2440-dclk"; } void __init_or_cpufreq s3c244x_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long clkdiv; - unsigned long camdiv; - unsigned long xtal; - unsigned long hclk, fclk, pclk; - int hdiv = 1; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - /* work out clock scalings */ - - switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) { - case S3C2440_CLKDIVN_HDIVN_1: - hdiv = 1; - break; - - case S3C2440_CLKDIVN_HDIVN_2: - hdiv = 2; - break; - - case S3C2440_CLKDIVN_HDIVN_4_8: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; - break; - - case S3C2440_CLKDIVN_HDIVN_3_6: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; - break; - } - - hclk = fclk / hdiv; - pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brief summary of clocks, etc */ - - printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c244x_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them, and to add new ones after the initialisation - */ - - s3c24xx_register_baseclocks(xtal); - s3c244x_setup_clocks(); - s3c2410_baseclk_add(); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } /* Since the S3C2442 and S3C2440 share items, put both subsystems here */ diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0f92ba8e788..62eaa42cb13 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -8,7 +8,6 @@ config ARCH_SHMOBILE_MULTI select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ARM_GIC - select MIGHT_HAVE_PCI select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select NO_IOPORT_MAP select PINCTRL @@ -205,8 +204,8 @@ config MACH_ARMADILLO800EVA_REFERENCE select SND_SOC_WM8978 if SND_SIMPLE_CARD select USE_OF ---help--- - Use reference implementation of Aramdillo800 EVA board support - which makes a greater use of device tree at the expense + Use reference implementation of Armadillo800 EVA board support + which makes greater use of device tree at the expense of not supporting a number of devices. This is intended to aid developers diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 8f3c68101d5..a177a7b3bdb 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -765,7 +765,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = { * "Media RAM (MERAM)" on r8a7740 documentation */ #define MEBUFCNTR 0xFE950098 -void r8a7740_meram_workaround(void) +void __init r8a7740_meram_workaround(void) { void __iomem *reg; @@ -869,17 +869,6 @@ void __init r8a7740_add_early_devices(void) #ifdef CONFIG_USE_OF -void __init r8a7740_add_early_devices_dt(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ - - early_platform_add_devices(r8a7740_early_devices, - ARRAY_SIZE(r8a7740_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - void __init r8a7740_add_standard_devices_dt(void) { platform_add_devices(r8a7740_devices_dt, diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 27301278c20..f8176b051be 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -1037,11 +1037,7 @@ void __init sh7372_add_early_devices_dt(void) { shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */ - early_platform_add_devices(sh7372_early_devices, - ARRAY_SIZE(sh7372_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); + sh7372_add_early_devices(); } void __init sh7372_add_standard_devices_dt(void) diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 55b305d5166..e16999e5b73 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -7,7 +7,6 @@ config ARCH_TEGRA select CLKSRC_MMIO select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select MIGHT_HAVE_PCI select PINCTRL select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index f2c89fb8fca..be83ba25f81 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -310,6 +310,21 @@ static struct platform_device char_lcd_device = { .resource = char_lcd_resources, }; +static struct resource leds_resources[] = { + { + .start = VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET, + .end = VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET + 4, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_device = { + .name = "versatile-leds", + .id = -1, + .num_resources = ARRAY_SIZE(leds_resources), + .resource = leds_resources, +}; + /* * Clock handling */ @@ -795,6 +810,7 @@ void __init versatile_init(void) platform_device_register(&versatile_i2c_device); platform_device_register(&smc91x_device); platform_device_register(&char_lcd_device); + platform_device_register(&leds_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 657d52d0391..b8ac752fd24 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -18,6 +18,8 @@ config ARCH_VEXPRESS select POWER_SUPPLY select REGULATOR_FIXED_VOLTAGE if REGULATOR select VEXPRESS_CONFIG + select VEXPRESS_SYSCFG + select MFD_VEXPRESS_SYSREG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard, diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index bde4374ab6d..152fad91b3a 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -4,10 +4,9 @@ /* Tile's peripherals static mappings should start here */ #define V2T_PERIPH 0xf8200000 -void vexpress_dt_smp_map_io(void); - bool vexpress_smp_init_ops(void); extern struct smp_operations vexpress_smp_ops; +extern struct smp_operations vexpress_smp_dt_ops; extern void vexpress_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 6f34497a424..494d70bfdda 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -128,6 +128,10 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static struct clk_lookup osc1_lookup = { + .dev_id = "ct:clcd", +}; + static struct platform_device osc1_device = { .name = "vexpress-osc", .id = 1, @@ -135,6 +139,7 @@ static struct platform_device osc1_device = { .resource = (struct resource []) { VEXPRESS_RES_FUNC(0xf, 1), }, + .dev.platform_data = &osc1_lookup, }; static void __init ct_ca9x4_init(void) @@ -155,10 +160,7 @@ static void __init ct_ca9x4_init(void) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); platform_device_register(&pmu_device); - platform_device_register(&osc1_device); - - WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev), - NULL, "ct:clcd")); + vexpress_syscfg_device_register(&osc1_device); } #ifdef CONFIG_SMP diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 993c9ae5dc5..a1f3804fd5a 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -12,8 +12,7 @@ #include <linux/errno.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/of.h> -#include <linux/of_fdt.h> +#include <linux/of_address.h> #include <linux/vexpress.h> #include <asm/mcpm.h> @@ -26,154 +25,13 @@ #include "core.h" -#if defined(CONFIG_OF) - -static enum { - GENERIC_SCU, - CORTEX_A9_SCU, -} vexpress_dt_scu __initdata = GENERIC_SCU; - -static struct map_desc vexpress_dt_cortex_a9_scu_map __initdata = { - .virtual = V2T_PERIPH, - /* .pfn set in vexpress_dt_init_cortex_a9_scu() */ - .length = SZ_128, - .type = MT_DEVICE, -}; - -static void *vexpress_dt_cortex_a9_scu_base __initdata; - -const static char *vexpress_dt_cortex_a9_match[] __initconst = { - "arm,cortex-a5-scu", - "arm,cortex-a9-scu", - NULL -}; - -static int __init vexpress_dt_find_scu(unsigned long node, - const char *uname, int depth, void *data) -{ - if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) { - phys_addr_t phys_addr; - __be32 *reg = of_get_flat_dt_prop(node, "reg", NULL); - - if (WARN_ON(!reg)) - return -EINVAL; - - phys_addr = be32_to_cpup(reg); - vexpress_dt_scu = CORTEX_A9_SCU; - - vexpress_dt_cortex_a9_scu_map.pfn = __phys_to_pfn(phys_addr); - iotable_init(&vexpress_dt_cortex_a9_scu_map, 1); - vexpress_dt_cortex_a9_scu_base = ioremap(phys_addr, SZ_256); - if (WARN_ON(!vexpress_dt_cortex_a9_scu_base)) - return -EFAULT; - } - - return 0; -} - -void __init vexpress_dt_smp_map_io(void) -{ - if (initial_boot_params) - WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL)); -} - -static int __init vexpress_dt_cpus_num(unsigned long node, const char *uname, - int depth, void *data) -{ - static int prev_depth = -1; - static int nr_cpus = -1; - - if (prev_depth > depth && nr_cpus > 0) - return nr_cpus; - - if (nr_cpus < 0 && strcmp(uname, "cpus") == 0) - nr_cpus = 0; - - if (nr_cpus >= 0) { - const char *device_type = of_get_flat_dt_prop(node, - "device_type", NULL); - - if (device_type && strcmp(device_type, "cpu") == 0) - nr_cpus++; - } - - prev_depth = depth; - - return 0; -} - -static void __init vexpress_dt_smp_init_cpus(void) -{ - int ncores = 0, i; - - switch (vexpress_dt_scu) { - case GENERIC_SCU: - ncores = of_scan_flat_dt(vexpress_dt_cpus_num, NULL); - break; - case CORTEX_A9_SCU: - ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base); - break; - default: - WARN_ON(1); - break; - } - - if (ncores < 2) - return; - - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; ++i) - set_cpu_possible(i, true); -} - -static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) -{ - int i; - - switch (vexpress_dt_scu) { - case GENERIC_SCU: - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - break; - case CORTEX_A9_SCU: - scu_enable(vexpress_dt_cortex_a9_scu_base); - break; - default: - WARN_ON(1); - break; - } -} - -#else - -static void __init vexpress_dt_smp_init_cpus(void) -{ - WARN_ON(1); -} - -void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) -{ - WARN_ON(1); -} - -#endif - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ static void __init vexpress_smp_init_cpus(void) { - if (ct_desc) - ct_desc->init_cpu_map(); - else - vexpress_dt_smp_init_cpus(); - + ct_desc->init_cpu_map(); } static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus) @@ -182,10 +40,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus) * Initialise the present map, which describes the set of CPUs * actually populated at the present time. */ - if (ct_desc) - ct_desc->smp_enable(max_cpus); - else - vexpress_dt_smp_prepare_cpus(max_cpus); + ct_desc->smp_enable(max_cpus); /* * Write the address of secondary startup into the @@ -223,3 +78,39 @@ bool __init vexpress_smp_init_ops(void) #endif return false; } + +#if defined(CONFIG_OF) + +static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = { + { .compatible = "arm,cortex-a5-scu", }, + { .compatible = "arm,cortex-a9-scu", }, + {} +}; + +static void __init vexpress_smp_dt_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *scu = of_find_matching_node(NULL, + vexpress_smp_dt_scu_match); + + if (scu) + scu_enable(of_iomap(scu, 0)); + + /* + * Write the address of secondary startup into the + * system-wide flags register. The boot monitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + vexpress_flags_set(virt_to_phys(versatile_secondary_startup)); +} + +struct smp_operations __initdata vexpress_smp_dt_ops = { + .smp_prepare_cpus = vexpress_smp_dt_prepare_cpus, + .smp_secondary_init = versatile_secondary_init, + .smp_boot_secondary = versatile_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = vexpress_cpu_die, +#endif +}; + +#endif diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 4f8b8cb17ff..38f4f6f3777 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -201,8 +201,9 @@ static struct platform_device v2m_cf_device = { static struct mmci_platform_data v2m_mmci_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_wp = VEXPRESS_GPIO_MMC_WPROT, - .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN, + .status = vexpress_get_mci_cardin, + .gpio_cd = -1, + .gpio_wp = -1, }; static struct resource v2m_sysreg_resources[] = { @@ -340,11 +341,6 @@ static void __init v2m_init(void) regulator_register_fixed(0, v2m_eth_supplies, ARRAY_SIZE(v2m_eth_supplies)); - platform_device_register(&v2m_muxfpga_device); - platform_device_register(&v2m_shutdown_device); - platform_device_register(&v2m_reboot_device); - platform_device_register(&v2m_dvimode_device); - platform_device_register(&v2m_sysreg_device); platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); @@ -356,6 +352,11 @@ static void __init v2m_init(void) for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) amba_device_register(v2m_amba_devs[i], &iomem_resource); + vexpress_syscfg_device_register(&v2m_muxfpga_device); + vexpress_syscfg_device_register(&v2m_shutdown_device); + vexpress_syscfg_device_register(&v2m_reboot_device); + vexpress_syscfg_device_register(&v2m_dvimode_device); + ct_desc->init_tile(); } @@ -369,71 +370,10 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_machine = v2m_init, MACHINE_END -static struct map_desc v2m_rs1_io_desc __initdata = { - .virtual = V2M_PERIPH, - .pfn = __phys_to_pfn(0x1c000000), - .length = SZ_2M, - .type = MT_DEVICE, -}; - -static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname, - int depth, void *data) -{ - const char **map = data; - - if (strcmp(uname, "motherboard") != 0) - return 0; - - *map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL); - - return 1; -} - -void __init v2m_dt_map_io(void) -{ - const char *map = NULL; - - of_scan_flat_dt(v2m_dt_scan_memory_map, &map); - - if (map && strcmp(map, "rs1") == 0) - iotable_init(&v2m_rs1_io_desc, 1); - else - iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); - -#if defined(CONFIG_SMP) - vexpress_dt_smp_map_io(); -#endif -} - -void __init v2m_dt_init_early(void) -{ - u32 dt_hbi; - - vexpress_sysreg_of_early_init(); - - /* Confirm board type against DT property, if available */ - if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) { - u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER); - - if (WARN_ON(dt_hbi != hbi)) - pr_warning("vexpress: DT HBI (%x) is not matching " - "hardware (%x)!\n", dt_hbi, hbi); - } - - versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); -} - -static const struct of_device_id v2m_dt_bus_match[] __initconst = { - { .compatible = "simple-bus", }, - { .compatible = "arm,amba-bus", }, - { .compatible = "arm,vexpress,config-bus", }, - {} -}; - static void __init v2m_dt_init(void) { l2x0_of_init(0x00400000, 0xfe0fffff); - of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const v2m_dt_match[] __initconst = { @@ -443,9 +383,7 @@ static const char * const v2m_dt_match[] __initconst = { DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .dt_compat = v2m_dt_match, - .smp = smp_ops(vexpress_smp_ops), + .smp = smp_ops(vexpress_smp_dt_ops), .smp_init = smp_init_ops(vexpress_smp_init_ops), - .map_io = v2m_dt_map_io, - .init_early = v2m_dt_init_early, .init_machine = v2m_dt_init, MACHINE_END diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 384a776d8eb..61b4d705c26 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -40,7 +40,7 @@ static void __iomem *sync32k_cnt_reg; static u64 notrace omap_32k_read_sched_clock(void) { - return sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0; + return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; } /** @@ -64,7 +64,7 @@ static void omap_read_persistent_clock(struct timespec *ts) spin_lock_irqsave(&read_persistent_clock_lock, flags); last_cycles = cycles; - cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0; + cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; nsecs = clocksource_cyc2ns(cycles - last_cycles, persistent_mult, persistent_shift); @@ -95,7 +95,7 @@ int __init omap_init_clocksource_32k(void __iomem *vbase) * The 'SCHEME' bits(30-31) of the revision register is used * to identify the version. */ - if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) & + if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) & OMAP2_32KSYNCNT_REV_SCHEME) sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH; else diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index aa7ebc6bcd6..48b69de89a5 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -85,12 +85,12 @@ static void dbg_led_set(struct led_classdev *cdev, struct dbg_led *led = container_of(cdev, struct dbg_led, cdev); u16 reg; - reg = __raw_readw(&fpga->leds); + reg = readw_relaxed(&fpga->leds); if (b != LED_OFF) reg |= led->mask; else reg &= ~led->mask; - __raw_writew(reg, &fpga->leds); + writew_relaxed(reg, &fpga->leds); } static enum led_brightness dbg_led_get(struct led_classdev *cdev) @@ -98,7 +98,7 @@ static enum led_brightness dbg_led_get(struct led_classdev *cdev) struct dbg_led *led = container_of(cdev, struct dbg_led, cdev); u16 reg; - reg = __raw_readw(&fpga->leds); + reg = readw_relaxed(&fpga->leds); return (reg & led->mask) ? LED_FULL : LED_OFF; } @@ -112,7 +112,7 @@ static int fpga_probe(struct platform_device *pdev) return -ENODEV; fpga = ioremap(iomem->start, resource_size(iomem)); - __raw_writew(0xff, &fpga->leds); + writew_relaxed(0xff, &fpga->leds); for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) { struct dbg_led *led; @@ -138,15 +138,15 @@ static int fpga_probe(struct platform_device *pdev) static int fpga_suspend_noirq(struct device *dev) { - fpga_led_state = __raw_readw(&fpga->leds); - __raw_writew(0xff, &fpga->leds); + fpga_led_state = readw_relaxed(&fpga->leds); + writew_relaxed(0xff, &fpga->leds); return 0; } static int fpga_resume_noirq(struct device *dev) { - __raw_writew(~fpga_led_state, &fpga->leds); + writew_relaxed(~fpga_led_state, &fpga->leds); return 0; } diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 869254cebf8..db10169a08d 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -103,7 +103,7 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer) timer->context.tmar); omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, timer->context.tsicr); - __raw_writel(timer->context.tier, timer->irq_ena); + writel_relaxed(timer->context.tier, timer->irq_ena); omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, timer->context.tclr); } @@ -699,9 +699,9 @@ int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask) omap_dm_timer_enable(timer); if (timer->revision == 1) - l = __raw_readl(timer->irq_ena) & ~mask; + l = readl_relaxed(timer->irq_ena) & ~mask; - __raw_writel(l, timer->irq_dis); + writel_relaxed(l, timer->irq_dis); l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask; omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l); @@ -722,7 +722,7 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) return 0; } - l = __raw_readl(timer->irq_stat); + l = readl_relaxed(timer->irq_stat); return l; } diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 2861b155485..dd79f3005cd 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -280,20 +280,20 @@ static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg, int posted) { if (posted) - while (__raw_readl(timer->pend) & (reg >> WPSHIFT)) + while (readl_relaxed(timer->pend) & (reg >> WPSHIFT)) cpu_relax(); - return __raw_readl(timer->func_base + (reg & 0xff)); + return readl_relaxed(timer->func_base + (reg & 0xff)); } static inline void __omap_dm_timer_write(struct omap_dm_timer *timer, u32 reg, u32 val, int posted) { if (posted) - while (__raw_readl(timer->pend) & (reg >> WPSHIFT)) + while (readl_relaxed(timer->pend) & (reg >> WPSHIFT)) cpu_relax(); - __raw_writel(val, timer->func_base + (reg & 0xff)); + writel_relaxed(val, timer->func_base + (reg & 0xff)); } static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) @@ -301,7 +301,7 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) u32 tidr; /* Assume v1 ip if bits [31:16] are zero */ - tidr = __raw_readl(timer->io_base); + tidr = readl_relaxed(timer->io_base); if (!(tidr >> 16)) { timer->revision = 1; timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; @@ -385,7 +385,7 @@ static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer, } /* Ack possibly pending interrupt */ - __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat); + writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat); } static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer, @@ -399,7 +399,7 @@ static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer, static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer, unsigned int value) { - __raw_writel(value, timer->irq_ena); + writel_relaxed(value, timer->irq_ena); __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0); } @@ -412,7 +412,7 @@ __omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted) static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) { - __raw_writel(value, timer->irq_stat); + writel_relaxed(value, timer->irq_stat); } #endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 7231c8e4975..72d4178ad23 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -119,6 +119,7 @@ struct s3c_plltab { struct s3c_cpufreq_config { struct s3c_freq freq; struct s3c_freq max; + struct clk *mpll; struct cpufreq_frequency_table pll; struct s3c_clkdivs divs; struct s3c_cpufreq_info *info; /* for core, not drivers */ diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 5992b8dd9b8..5a237db9f9e 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -43,16 +43,6 @@ extern unsigned long samsung_cpu_id; #define S5PV210_CPU_ID 0x43110000 #define S5PV210_CPU_MASK 0xFFFFF000 -#define EXYNOS4210_CPU_ID 0x43210000 -#define EXYNOS4212_CPU_ID 0x43220000 -#define EXYNOS4412_CPU_ID 0xE4412200 -#define EXYNOS4_CPU_MASK 0xFFFE0000 - -#define EXYNOS5250_SOC_ID 0x43520000 -#define EXYNOS5420_SOC_ID 0xE5420000 -#define EXYNOS5440_SOC_ID 0xE5440000 -#define EXYNOS5_SOC_MASK 0xFFFFF000 - #define IS_SAMSUNG_CPU(name, id, mask) \ static inline int is_samsung_##name(void) \ { \ @@ -68,12 +58,6 @@ IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK) IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK) IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) -IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) -IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK) -IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ @@ -126,50 +110,6 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_s5pv210() 0 #endif -#if defined(CONFIG_CPU_EXYNOS4210) -# define soc_is_exynos4210() is_samsung_exynos4210() -#else -# define soc_is_exynos4210() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS4212) -# define soc_is_exynos4212() is_samsung_exynos4212() -#else -# define soc_is_exynos4212() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS4412) -# define soc_is_exynos4412() is_samsung_exynos4412() -#else -# define soc_is_exynos4412() 0 -#endif - -#define EXYNOS4210_REV_0 (0x0) -#define EXYNOS4210_REV_1_0 (0x10) -#define EXYNOS4210_REV_1_1 (0x11) - -#if defined(CONFIG_SOC_EXYNOS5250) -# define soc_is_exynos5250() is_samsung_exynos5250() -#else -# define soc_is_exynos5250() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS5420) -# define soc_is_exynos5420() is_samsung_exynos5420() -#else -# define soc_is_exynos5420() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS5440) -# define soc_is_exynos5440() is_samsung_exynos5440() -#else -# define soc_is_exynos5440() 0 -#endif - -#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \ - soc_is_exynos4412()) -#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420()) - #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef KHZ @@ -239,7 +179,6 @@ extern struct bus_type s3c2443_subsys; extern struct bus_type s3c6410_subsys; extern struct bus_type s5p64x0_subsys; extern struct bus_type s5pv210_subsys; -extern struct bus_type exynos_subsys; extern void (*s5pc1xx_idle)(void); diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 2c4332b9f94..fce41e93b6a 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -6,12 +6,6 @@ config PLAT_VERSATILE_CLOCK config PLAT_VERSATILE_CLCD bool -config PLAT_VERSATILE_LEDS - def_bool y if NEW_LEDS - depends on ARCH_REALVIEW || ARCH_VERSATILE - select LEDS_CLASS - select LEDS_TRIGGERS - config PLAT_VERSATILE_SCHED_CLOCK def_bool y diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index f88d448b629..2e0c472958a 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -2,6 +2,5 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o -obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi index 2f2ecd21736..ac2cb241802 100644 --- a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi @@ -200,7 +200,7 @@ }; mcc { - compatible = "arm,vexpress,config-bus", "simple-bus"; + compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; v2m_oscclk1: osc@1 { diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 552373c4e36..28634277888 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -41,4 +41,14 @@ config ARM_CCI help Driver supporting the CCI cache coherent interconnect for ARM platforms. + +config VEXPRESS_CONFIG + bool "Versatile Express configuration bus" + default y if ARCH_VEXPRESS + depends on ARM || ARM64 + depends on OF + select REGMAP + help + Platform configuration infrastructure for the ARM Ltd. + Versatile Express. endmenu diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 8947bdd0de8..f095aa771de 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -10,3 +10,5 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o # CCI cache coherent interconnect for ARM platforms obj-$(CONFIG_ARM_CCI) += arm-cci.o + +obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c new file mode 100644 index 00000000000..a64763b6b5f --- /dev/null +++ b/drivers/bus/vexpress-config.c @@ -0,0 +1,202 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2014 ARM Limited + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/vexpress.h> + + +struct vexpress_config_bridge { + struct vexpress_config_bridge_ops *ops; + void *context; +}; + + +static DEFINE_MUTEX(vexpress_config_mutex); +static struct class *vexpress_config_class; +static u32 vexpress_config_site_master = VEXPRESS_SITE_MASTER; + + +void vexpress_config_set_master(u32 site) +{ + vexpress_config_site_master = site; +} + +u32 vexpress_config_get_master(void) +{ + return vexpress_config_site_master; +} + +void vexpress_config_lock(void *arg) +{ + mutex_lock(&vexpress_config_mutex); +} + +void vexpress_config_unlock(void *arg) +{ + mutex_unlock(&vexpress_config_mutex); +} + + +static void vexpress_config_find_prop(struct device_node *node, + const char *name, u32 *val) +{ + /* Default value */ + *val = 0; + + of_node_get(node); + while (node) { + if (of_property_read_u32(node, name, val) == 0) { + of_node_put(node); + return; + } + node = of_get_next_parent(node); + } +} + +int vexpress_config_get_topo(struct device_node *node, u32 *site, + u32 *position, u32 *dcc) +{ + vexpress_config_find_prop(node, "arm,vexpress,site", site); + if (*site == VEXPRESS_SITE_MASTER) + *site = vexpress_config_site_master; + if (WARN_ON(vexpress_config_site_master == VEXPRESS_SITE_MASTER)) + return -EINVAL; + vexpress_config_find_prop(node, "arm,vexpress,position", position); + vexpress_config_find_prop(node, "arm,vexpress,dcc", dcc); + + return 0; +} + + +static void vexpress_config_devres_release(struct device *dev, void *res) +{ + struct vexpress_config_bridge *bridge = dev_get_drvdata(dev->parent); + struct regmap *regmap = res; + + bridge->ops->regmap_exit(regmap, bridge->context); +} + +struct regmap *devm_regmap_init_vexpress_config(struct device *dev) +{ + struct vexpress_config_bridge *bridge; + struct regmap *regmap; + struct regmap **res; + + if (WARN_ON(dev->parent->class != vexpress_config_class)) + return ERR_PTR(-ENODEV); + + bridge = dev_get_drvdata(dev->parent); + if (WARN_ON(!bridge)) + return ERR_PTR(-EINVAL); + + res = devres_alloc(vexpress_config_devres_release, sizeof(*res), + GFP_KERNEL); + if (!res) + return ERR_PTR(-ENOMEM); + + regmap = bridge->ops->regmap_init(dev, bridge->context); + if (IS_ERR(regmap)) { + devres_free(res); + return regmap; + } + + *res = regmap; + devres_add(dev, res); + + return regmap; +} +EXPORT_SYMBOL_GPL(devm_regmap_init_vexpress_config); + +struct device *vexpress_config_bridge_register(struct device *parent, + struct vexpress_config_bridge_ops *ops, void *context) +{ + struct device *dev; + struct vexpress_config_bridge *bridge; + + if (!vexpress_config_class) { + vexpress_config_class = class_create(THIS_MODULE, + "vexpress-config"); + if (IS_ERR(vexpress_config_class)) + return (void *)vexpress_config_class; + } + + dev = device_create(vexpress_config_class, parent, 0, + NULL, "%s.bridge", dev_name(parent)); + + if (IS_ERR(dev)) + return dev; + + bridge = devm_kmalloc(dev, sizeof(*bridge), GFP_KERNEL); + if (!bridge) { + put_device(dev); + device_unregister(dev); + return ERR_PTR(-ENOMEM); + } + bridge->ops = ops; + bridge->context = context; + + dev_set_drvdata(dev, bridge); + + dev_dbg(parent, "Registered bridge '%s', parent node %p\n", + dev_name(dev), parent->of_node); + + return dev; +} + + +static int vexpress_config_node_match(struct device *dev, const void *data) +{ + const struct device_node *node = data; + + dev_dbg(dev, "Parent node %p, looking for %p\n", + dev->parent->of_node, node); + + return dev->parent->of_node == node; +} + +static int vexpress_config_populate(struct device_node *node) +{ + struct device_node *bridge; + struct device *parent; + + bridge = of_parse_phandle(node, "arm,vexpress,config-bridge", 0); + if (!bridge) + return -EINVAL; + + parent = class_find_device(vexpress_config_class, NULL, bridge, + vexpress_config_node_match); + if (WARN_ON(!parent)) + return -ENODEV; + + return of_platform_populate(node, NULL, NULL, parent); +} + +static int __init vexpress_config_init(void) +{ + int err = 0; + struct device_node *node; + + /* Need the config devices early, before the "normal" devices... */ + for_each_compatible_node(node, NULL, "arm,vexpress,config-bus") { + err = vexpress_config_populate(node); + if (err) + break; + } + + return err; +} +postcore_initcall(vexpress_config_init); + diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 6f56d3a4f01..4fdfd6c70bd 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -30,14 +30,7 @@ config COMMON_CLK_WM831X Supports the clocking subsystem of the WM831x/2x series of PMICs from Wolfson Microlectronics. -config COMMON_CLK_VERSATILE - bool "Clock driver for ARM Reference designs" - depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS || ARM64 - ---help--- - Supports clocking on ARM Reference designs: - - Integrator/AP and Integrator/CP - - RealView PB1176, EB, PB11MP and PBX - - Versatile Express +source "drivers/clk/versatile/Kconfig" config COMMON_CLK_MAX77686 tristate "Clock driver for Maxim 77686 MFD" diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 8eb4799237f..2cb62f87e06 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -8,4 +8,8 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o +obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o +obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o +obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o +obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 81e6d2f49aa..7fb0a28e65d 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -11,6 +11,7 @@ #include <linux/errno.h> #include <linux/hrtimer.h> +#include <linux/delay.h> #include "clk.h" #include "clk-pll.h" @@ -59,6 +60,72 @@ static long samsung_pll_round_rate(struct clk_hw *hw, } /* + * PLL2126 Clock Type + */ + +#define PLL2126_MDIV_MASK (0xff) +#define PLL2126_PDIV_MASK (0x3f) +#define PLL2126_SDIV_MASK (0x3) +#define PLL2126_MDIV_SHIFT (16) +#define PLL2126_PDIV_SHIFT (8) +#define PLL2126_SDIV_SHIFT (0) + +static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK; + pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK; + sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK; + + fvco *= (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll2126_clk_ops = { + .recalc_rate = samsung_pll2126_recalc_rate, +}; + +/* + * PLL3000 Clock Type + */ + +#define PLL3000_MDIV_MASK (0xff) +#define PLL3000_PDIV_MASK (0x3) +#define PLL3000_SDIV_MASK (0x3) +#define PLL3000_MDIV_SHIFT (16) +#define PLL3000_PDIV_SHIFT (8) +#define PLL3000_SDIV_SHIFT (0) + +static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK; + pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK; + sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK; + + fvco *= (2 * (mdiv + 8)); + do_div(fvco, pdiv << sdiv); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll3000_clk_ops = { + .recalc_rate = samsung_pll3000_recalc_rate, +}; + +/* * PLL35xx Clock Type */ /* Maximum lock time can be 270 * PDIV cycles */ @@ -564,7 +631,9 @@ static const struct clk_ops samsung_pll46xx_clk_min_ops = { #define PLL6552_PDIV_MASK 0x3f #define PLL6552_SDIV_MASK 0x7 #define PLL6552_MDIV_SHIFT 16 +#define PLL6552_MDIV_SHIFT_2416 14 #define PLL6552_PDIV_SHIFT 8 +#define PLL6552_PDIV_SHIFT_2416 5 #define PLL6552_SDIV_SHIFT 0 static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw, @@ -575,8 +644,13 @@ static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw, u64 fvco = parent_rate; pll_con = __raw_readl(pll->con_reg); - mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK; - pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK; + if (pll->type == pll_6552_s3c2416) { + mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK; + pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK; + } else { + mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK; + pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK; + } sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK; fvco *= mdiv; @@ -628,6 +702,169 @@ static const struct clk_ops samsung_pll6553_clk_ops = { }; /* + * PLL Clock Type of S3C24XX before S3C2443 + */ + +#define PLLS3C2410_MDIV_MASK (0xff) +#define PLLS3C2410_PDIV_MASK (0x1f) +#define PLLS3C2410_SDIV_MASK (0x3) +#define PLLS3C2410_MDIV_SHIFT (12) +#define PLLS3C2410_PDIV_SHIFT (4) +#define PLLS3C2410_SDIV_SHIFT (0) + +#define PLLS3C2410_ENABLE_REG_OFFSET 0x10 + +static unsigned long samsung_s3c2410_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK; + pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK; + sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK; + + fvco *= (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +static unsigned long samsung_s3c2440_mpll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK; + pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK; + sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK; + + fvco *= (2 * (mdiv + 8)); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +static int samsung_s3c2410_pll_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + const struct samsung_pll_rate_table *rate; + u32 tmp; + + /* Get required rate settings from table */ + rate = samsung_get_pll_settings(pll, drate); + if (!rate) { + pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, + drate, __clk_get_name(hw->clk)); + return -EINVAL; + } + + tmp = __raw_readl(pll->con_reg); + + /* Change PLL PMS values */ + tmp &= ~((PLLS3C2410_MDIV_MASK << PLLS3C2410_MDIV_SHIFT) | + (PLLS3C2410_PDIV_MASK << PLLS3C2410_PDIV_SHIFT) | + (PLLS3C2410_SDIV_MASK << PLLS3C2410_SDIV_SHIFT)); + tmp |= (rate->mdiv << PLLS3C2410_MDIV_SHIFT) | + (rate->pdiv << PLLS3C2410_PDIV_SHIFT) | + (rate->sdiv << PLLS3C2410_SDIV_SHIFT); + __raw_writel(tmp, pll->con_reg); + + /* Time to settle according to the manual */ + udelay(300); + + return 0; +} + +static int samsung_s3c2410_pll_enable(struct clk_hw *hw, int bit, bool enable) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_en = __raw_readl(pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET); + u32 pll_en_orig = pll_en; + + if (enable) + pll_en &= ~BIT(bit); + else + pll_en |= BIT(bit); + + __raw_writel(pll_en, pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET); + + /* if we started the UPLL, then allow to settle */ + if (enable && (pll_en_orig & BIT(bit))) + udelay(300); + + return 0; +} + +static int samsung_s3c2410_mpll_enable(struct clk_hw *hw) +{ + return samsung_s3c2410_pll_enable(hw, 5, true); +} + +static void samsung_s3c2410_mpll_disable(struct clk_hw *hw) +{ + samsung_s3c2410_pll_enable(hw, 5, false); +} + +static int samsung_s3c2410_upll_enable(struct clk_hw *hw) +{ + return samsung_s3c2410_pll_enable(hw, 7, true); +} + +static void samsung_s3c2410_upll_disable(struct clk_hw *hw) +{ + samsung_s3c2410_pll_enable(hw, 7, false); +} + +static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, +}; + +static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_upll_enable, + .disable = samsung_s3c2410_upll_disable, +}; + +static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = { + .recalc_rate = samsung_s3c2440_mpll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, +}; + +static const struct clk_ops samsung_s3c2410_mpll_clk_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +static const struct clk_ops samsung_s3c2410_upll_clk_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_upll_enable, + .disable = samsung_s3c2410_upll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +static const struct clk_ops samsung_s3c2440_mpll_clk_ops = { + .recalc_rate = samsung_s3c2440_mpll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +/* * PLL2550x Clock Type */ @@ -746,6 +983,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, } switch (pll_clk->type) { + case pll_2126: + init.ops = &samsung_pll2126_clk_ops; + break; + case pll_3000: + init.ops = &samsung_pll3000_clk_ops; + break; /* clk_ops for 35xx and 2550 are similar */ case pll_35xx: case pll_2550: @@ -773,6 +1016,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, init.ops = &samsung_pll36xx_clk_ops; break; case pll_6552: + case pll_6552_s3c2416: init.ops = &samsung_pll6552_clk_ops; break; case pll_6553: @@ -786,6 +1030,24 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, else init.ops = &samsung_pll46xx_clk_ops; break; + case pll_s3c2410_mpll: + if (!pll->rate_table) + init.ops = &samsung_s3c2410_mpll_clk_min_ops; + else + init.ops = &samsung_s3c2410_mpll_clk_ops; + break; + case pll_s3c2410_upll: + if (!pll->rate_table) + init.ops = &samsung_s3c2410_upll_clk_min_ops; + else + init.ops = &samsung_s3c2410_upll_clk_ops; + break; + case pll_s3c2440_mpll: + if (!pll->rate_table) + init.ops = &samsung_s3c2440_mpll_clk_min_ops; + else + init.ops = &samsung_s3c2440_mpll_clk_ops; + break; default: pr_warn("%s: Unknown pll type for pll clk %s\n", __func__, pll_clk->name); diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h index 6c39030080f..6428bcc6df6 100644 --- a/drivers/clk/samsung/clk-pll.h +++ b/drivers/clk/samsung/clk-pll.h @@ -13,6 +13,8 @@ #define __SAMSUNG_CLK_PLL_H enum samsung_pll_type { + pll_2126, + pll_3000, pll_35xx, pll_36xx, pll_2550, @@ -24,7 +26,11 @@ enum samsung_pll_type { pll_4650, pll_4650c, pll_6552, + pll_6552_s3c2416, pll_6553, + pll_s3c2410_mpll, + pll_s3c2410_upll, + pll_s3c2440_mpll, }; #define PLL_35XX_RATE(_rate, _m, _p, _s) \ diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c new file mode 100644 index 00000000000..0449cc0458e --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2410-dclk.c @@ -0,0 +1,440 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for s3c24xx external clock output. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include "clk.h" + +/* legacy access to misccr, until dt conversion is finished */ +#include <mach/hardware.h> +#include <mach/regs-gpio.h> + +#define MUX_DCLK0 0 +#define MUX_DCLK1 1 +#define DIV_DCLK0 2 +#define DIV_DCLK1 3 +#define GATE_DCLK0 4 +#define GATE_DCLK1 5 +#define MUX_CLKOUT0 6 +#define MUX_CLKOUT1 7 +#define DCLK_MAX_CLKS (MUX_CLKOUT1 + 1) + +enum supported_socs { + S3C2410, + S3C2412, + S3C2440, + S3C2443, +}; + +struct s3c24xx_dclk_drv_data { + const char **clkout0_parent_names; + int clkout0_num_parents; + const char **clkout1_parent_names; + int clkout1_num_parents; + const char **mux_parent_names; + int mux_num_parents; +}; + +/* + * Clock for output-parent selection in misccr + */ + +struct s3c24xx_clkout { + struct clk_hw hw; + u32 mask; + u8 shift; +}; + +#define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw) + +static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw) +{ + struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw); + int num_parents = __clk_get_num_parents(hw->clk); + u32 val; + + val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift; + val >>= clkout->shift; + val &= clkout->mask; + + if (val >= num_parents) + return -EINVAL; + + return val; +} + +static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index) +{ + struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw); + int ret = 0; + + s3c2410_modify_misccr((clkout->mask << clkout->shift), + (index << clkout->shift)); + + return ret; +} + +const struct clk_ops s3c24xx_clkout_ops = { + .get_parent = s3c24xx_clkout_get_parent, + .set_parent = s3c24xx_clkout_set_parent, + .determine_rate = __clk_mux_determine_rate, +}; + +struct clk *s3c24xx_register_clkout(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, + u8 shift, u32 mask) +{ + struct s3c24xx_clkout *clkout; + struct clk *clk; + struct clk_init_data init; + + /* allocate the clkout */ + clkout = kzalloc(sizeof(*clkout), GFP_KERNEL); + if (!clkout) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &s3c24xx_clkout_ops; + init.flags = CLK_IS_BASIC; + init.parent_names = parent_names; + init.num_parents = num_parents; + + clkout->shift = shift; + clkout->mask = mask; + clkout->hw.init = &init; + + clk = clk_register(dev, &clkout->hw); + + return clk; +} + +/* + * dclk and clkout init + */ + +struct s3c24xx_dclk { + struct device *dev; + void __iomem *base; + struct clk_onecell_data clk_data; + struct notifier_block dclk0_div_change_nb; + struct notifier_block dclk1_div_change_nb; + spinlock_t dclk_lock; + unsigned long reg_save; +}; + +#define to_s3c24xx_dclk0(x) \ + container_of(x, struct s3c24xx_dclk, dclk0_div_change_nb) + +#define to_s3c24xx_dclk1(x) \ + container_of(x, struct s3c24xx_dclk, dclk1_div_change_nb) + +static const char *dclk_s3c2410_p[] = { "pclk", "uclk" }; +static const char *clkout0_s3c2410_p[] = { "mpll", "upll", "fclk", "hclk", "pclk", + "gate_dclk0" }; +static const char *clkout1_s3c2410_p[] = { "mpll", "upll", "fclk", "hclk", "pclk", + "gate_dclk1" }; + +static const char *clkout0_s3c2412_p[] = { "mpll", "upll", "rtc_clkout", + "hclk", "pclk", "gate_dclk0" }; +static const char *clkout1_s3c2412_p[] = { "xti", "upll", "fclk", "hclk", "pclk", + "gate_dclk1" }; + +static const char *clkout0_s3c2440_p[] = { "xti", "upll", "fclk", "hclk", "pclk", + "gate_dclk0" }; +static const char *clkout1_s3c2440_p[] = { "mpll", "upll", "rtc_clkout", + "hclk", "pclk", "gate_dclk1" }; + +static const char *dclk_s3c2443_p[] = { "pclk", "epll" }; +static const char *clkout0_s3c2443_p[] = { "xti", "epll", "armclk", "hclk", "pclk", + "gate_dclk0" }; +static const char *clkout1_s3c2443_p[] = { "dummy", "epll", "rtc_clkout", + "hclk", "pclk", "gate_dclk1" }; + +#define DCLKCON_DCLK_DIV_MASK 0xf +#define DCLKCON_DCLK0_DIV_SHIFT 4 +#define DCLKCON_DCLK0_CMP_SHIFT 8 +#define DCLKCON_DCLK1_DIV_SHIFT 20 +#define DCLKCON_DCLK1_CMP_SHIFT 24 + +static void s3c24xx_dclk_update_cmp(struct s3c24xx_dclk *s3c24xx_dclk, + int div_shift, int cmp_shift) +{ + unsigned long flags = 0; + u32 dclk_con, div, cmp; + + spin_lock_irqsave(&s3c24xx_dclk->dclk_lock, flags); + + dclk_con = readl_relaxed(s3c24xx_dclk->base); + + div = ((dclk_con >> div_shift) & DCLKCON_DCLK_DIV_MASK) + 1; + cmp = ((div + 1) / 2) - 1; + + dclk_con &= ~(DCLKCON_DCLK_DIV_MASK << cmp_shift); + dclk_con |= (cmp << cmp_shift); + + writel_relaxed(dclk_con, s3c24xx_dclk->base); + + spin_unlock_irqrestore(&s3c24xx_dclk->dclk_lock, flags); +} + +static int s3c24xx_dclk0_div_notify(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk0(nb); + + if (event == POST_RATE_CHANGE) { + s3c24xx_dclk_update_cmp(s3c24xx_dclk, + DCLKCON_DCLK0_DIV_SHIFT, DCLKCON_DCLK0_CMP_SHIFT); + } + + return NOTIFY_DONE; +} + +static int s3c24xx_dclk1_div_notify(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk1(nb); + + if (event == POST_RATE_CHANGE) { + s3c24xx_dclk_update_cmp(s3c24xx_dclk, + DCLKCON_DCLK1_DIV_SHIFT, DCLKCON_DCLK1_CMP_SHIFT); + } + + return NOTIFY_DONE; +} + +#ifdef CONFIG_PM_SLEEP +static int s3c24xx_dclk_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev); + + s3c24xx_dclk->reg_save = readl_relaxed(s3c24xx_dclk->base); + return 0; +} + +static int s3c24xx_dclk_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev); + + writel_relaxed(s3c24xx_dclk->reg_save, s3c24xx_dclk->base); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(s3c24xx_dclk_pm_ops, + s3c24xx_dclk_suspend, s3c24xx_dclk_resume); + +static int s3c24xx_dclk_probe(struct platform_device *pdev) +{ + struct s3c24xx_dclk *s3c24xx_dclk; + struct resource *mem; + struct clk **clk_table; + struct s3c24xx_dclk_drv_data *dclk_variant; + int ret, i; + + s3c24xx_dclk = devm_kzalloc(&pdev->dev, sizeof(*s3c24xx_dclk), + GFP_KERNEL); + if (!s3c24xx_dclk) + return -ENOMEM; + + s3c24xx_dclk->dev = &pdev->dev; + platform_set_drvdata(pdev, s3c24xx_dclk); + spin_lock_init(&s3c24xx_dclk->dclk_lock); + + clk_table = devm_kzalloc(&pdev->dev, + sizeof(struct clk *) * DCLK_MAX_CLKS, + GFP_KERNEL); + if (!clk_table) + return -ENOMEM; + + s3c24xx_dclk->clk_data.clks = clk_table; + s3c24xx_dclk->clk_data.clk_num = DCLK_MAX_CLKS; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + s3c24xx_dclk->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(s3c24xx_dclk->base)) + return PTR_ERR(s3c24xx_dclk->base); + + dclk_variant = (struct s3c24xx_dclk_drv_data *) + platform_get_device_id(pdev)->driver_data; + + + clk_table[MUX_DCLK0] = clk_register_mux(&pdev->dev, "mux_dclk0", + dclk_variant->mux_parent_names, + dclk_variant->mux_num_parents, 0, + s3c24xx_dclk->base, 1, 1, 0, + &s3c24xx_dclk->dclk_lock); + clk_table[MUX_DCLK1] = clk_register_mux(&pdev->dev, "mux_dclk1", + dclk_variant->mux_parent_names, + dclk_variant->mux_num_parents, 0, + s3c24xx_dclk->base, 17, 1, 0, + &s3c24xx_dclk->dclk_lock); + + clk_table[DIV_DCLK0] = clk_register_divider(&pdev->dev, "div_dclk0", + "mux_dclk0", 0, s3c24xx_dclk->base, + 4, 4, 0, &s3c24xx_dclk->dclk_lock); + clk_table[DIV_DCLK1] = clk_register_divider(&pdev->dev, "div_dclk1", + "mux_dclk1", 0, s3c24xx_dclk->base, + 20, 4, 0, &s3c24xx_dclk->dclk_lock); + + clk_table[GATE_DCLK0] = clk_register_gate(&pdev->dev, "gate_dclk0", + "div_dclk0", CLK_SET_RATE_PARENT, + s3c24xx_dclk->base, 0, 0, + &s3c24xx_dclk->dclk_lock); + clk_table[GATE_DCLK1] = clk_register_gate(&pdev->dev, "gate_dclk1", + "div_dclk1", CLK_SET_RATE_PARENT, + s3c24xx_dclk->base, 16, 0, + &s3c24xx_dclk->dclk_lock); + + clk_table[MUX_CLKOUT0] = s3c24xx_register_clkout(&pdev->dev, + "clkout0", dclk_variant->clkout0_parent_names, + dclk_variant->clkout0_num_parents, 4, 7); + clk_table[MUX_CLKOUT1] = s3c24xx_register_clkout(&pdev->dev, + "clkout1", dclk_variant->clkout1_parent_names, + dclk_variant->clkout1_num_parents, 8, 7); + + for (i = 0; i < DCLK_MAX_CLKS; i++) + if (IS_ERR(clk_table[i])) { + dev_err(&pdev->dev, "clock %d failed to register\n", i); + ret = PTR_ERR(clk_table[i]); + goto err_clk_register; + } + + ret = clk_register_clkdev(clk_table[MUX_DCLK0], "dclk0", NULL); + if (!ret) + ret = clk_register_clkdev(clk_table[MUX_DCLK1], "dclk1", NULL); + if (!ret) + ret = clk_register_clkdev(clk_table[MUX_CLKOUT0], + "clkout0", NULL); + if (!ret) + ret = clk_register_clkdev(clk_table[MUX_CLKOUT1], + "clkout1", NULL); + if (ret) { + dev_err(&pdev->dev, "failed to register aliases, %d\n", ret); + goto err_clk_register; + } + + s3c24xx_dclk->dclk0_div_change_nb.notifier_call = + s3c24xx_dclk0_div_notify; + + s3c24xx_dclk->dclk1_div_change_nb.notifier_call = + s3c24xx_dclk1_div_notify; + + ret = clk_notifier_register(clk_table[DIV_DCLK0], + &s3c24xx_dclk->dclk0_div_change_nb); + if (ret) + goto err_clk_register; + + ret = clk_notifier_register(clk_table[DIV_DCLK1], + &s3c24xx_dclk->dclk1_div_change_nb); + if (ret) + goto err_dclk_notify; + + return 0; + +err_dclk_notify: + clk_notifier_unregister(clk_table[DIV_DCLK0], + &s3c24xx_dclk->dclk0_div_change_nb); +err_clk_register: + for (i = 0; i < DCLK_MAX_CLKS; i++) + if (clk_table[i] && !IS_ERR(clk_table[i])) + clk_unregister(clk_table[i]); + + return ret; +} + +static int s3c24xx_dclk_remove(struct platform_device *pdev) +{ + struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev); + struct clk **clk_table = s3c24xx_dclk->clk_data.clks; + int i; + + clk_notifier_unregister(clk_table[DIV_DCLK1], + &s3c24xx_dclk->dclk1_div_change_nb); + clk_notifier_unregister(clk_table[DIV_DCLK0], + &s3c24xx_dclk->dclk0_div_change_nb); + + for (i = 0; i < DCLK_MAX_CLKS; i++) + clk_unregister(clk_table[i]); + + return 0; +} + +static struct s3c24xx_dclk_drv_data dclk_variants[] = { + [S3C2410] = { + .clkout0_parent_names = clkout0_s3c2410_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2410_p), + .clkout1_parent_names = clkout1_s3c2410_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2410_p), + .mux_parent_names = dclk_s3c2410_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p), + }, + [S3C2412] = { + .clkout0_parent_names = clkout0_s3c2412_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2412_p), + .clkout1_parent_names = clkout1_s3c2412_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2412_p), + .mux_parent_names = dclk_s3c2410_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p), + }, + [S3C2440] = { + .clkout0_parent_names = clkout0_s3c2440_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2440_p), + .clkout1_parent_names = clkout1_s3c2440_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2440_p), + .mux_parent_names = dclk_s3c2410_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p), + }, + [S3C2443] = { + .clkout0_parent_names = clkout0_s3c2443_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2443_p), + .clkout1_parent_names = clkout1_s3c2443_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2443_p), + .mux_parent_names = dclk_s3c2443_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2443_p), + }, +}; + +static struct platform_device_id s3c24xx_dclk_driver_ids[] = { + { + .name = "s3c2410-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2410], + }, { + .name = "s3c2412-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2412], + }, { + .name = "s3c2440-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2440], + }, { + .name = "s3c2443-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2443], + }, + { } +}; + +MODULE_DEVICE_TABLE(platform, s3c24xx_dclk_driver_ids); + +static struct platform_driver s3c24xx_dclk_driver = { + .driver = { + .name = "s3c24xx-dclk", + .owner = THIS_MODULE, + .pm = &s3c24xx_dclk_pm_ops, + }, + .probe = s3c24xx_dclk_probe, + .remove = s3c24xx_dclk_remove, + .id_table = s3c24xx_dclk_driver_ids, +}; +module_platform_driver(s3c24xx_dclk_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); +MODULE_DESCRIPTION("Driver for the S3C24XX external clock outputs"); diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c new file mode 100644 index 00000000000..7b4182186a3 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -0,0 +1,477 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2410 and following SoCs. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/s3c2410.h> + +#include "clk.h" +#include "clk-pll.h" + +#define LOCKTIME 0x00 +#define MPLLCON 0x04 +#define UPLLCON 0x08 +#define CLKCON 0x0c +#define CLKSLOW 0x10 +#define CLKDIVN 0x14 +#define CAMDIVN 0x18 + +/* the soc types */ +enum supported_socs { + S3C2410, + S3C2440, + S3C2442, +}; + +/* list of PLLs to be registered */ +enum s3c2410_plls { + mpll, upll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2410_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2410_clk_regs[] __initdata = { + LOCKTIME, + MPLLCON, + UPLLCON, + CLKCON, + CLKSLOW, + CLKDIVN, + CAMDIVN, +}; + +static int s3c2410_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2410_save, + ARRAY_SIZE(s3c2410_clk_regs)); + + return 0; +} + +static void s3c2410_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2410_save, + ARRAY_SIZE(s3c2410_clk_regs)); +} + +static struct syscore_ops s3c2410_clk_syscore_ops = { + .suspend = s3c2410_clk_suspend, + .resume = s3c2410_clk_resume, +}; + +static void s3c2410_clk_sleep_init(void) +{ + s3c2410_save = samsung_clk_alloc_reg_dump(s3c2410_clk_regs, + ARRAY_SIZE(s3c2410_clk_regs)); + if (!s3c2410_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2410_clk_syscore_ops); + return; +} +#else +static void s3c2410_clk_sleep_init(void) {} +#endif + +PNAME(fclk_p) = { "mpll", "div_slow" }; + +struct samsung_mux_clock s3c2410_common_muxes[] __initdata = { + MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1), +}; + +static struct clk_div_table divslow_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 6 }, + { .val = 4, .div = 8 }, + { .val = 5, .div = 10 }, + { .val = 6, .div = 12 }, + { .val = 7, .div = 14 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2410_common_dividers[] __initdata = { + DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d), + DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1), +}; + +struct samsung_gate_clock s3c2410_common_gates[] __initdata = { + GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0), + GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0), + GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0), + GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0), + GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0), + GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0), + GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0), + GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0), +}; + +/* should be added _after_ the soc-specific clocks are created */ +struct samsung_clock_alias s3c2410_common_aliases[] __initdata = { + ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(HCLK_USBD, NULL, "usb-device"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(UCLK, NULL, "usb-bus-host"), + ALIAS(UCLK, NULL, "usb-bus-gadget"), + ALIAS(ARMCLK, NULL, "armclk"), + ALIAS(UCLK, NULL, "uclk"), + ALIAS(HCLK, NULL, "hclk"), + ALIAS(MPLL, NULL, "mpll"), + ALIAS(FCLK, NULL, "fclk"), +}; + +/* S3C2410 specific clocks */ + +static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = { + /* sorted in descending order */ + /* 2410A extras */ + PLL_35XX_RATE(270000000, 127, 1, 1), + PLL_35XX_RATE(268000000, 126, 1, 1), + PLL_35XX_RATE(266000000, 125, 1, 1), + PLL_35XX_RATE(226000000, 105, 1, 1), + PLL_35XX_RATE(210000000, 132, 2, 1), + /* 2410 common */ + PLL_35XX_RATE(203000000, 161, 3, 1), + PLL_35XX_RATE(192000000, 88, 1, 1), + PLL_35XX_RATE(186000000, 85, 1, 1), + PLL_35XX_RATE(180000000, 82, 1, 1), + PLL_35XX_RATE(170000000, 77, 1, 1), + PLL_35XX_RATE(158000000, 71, 1, 1), + PLL_35XX_RATE(152000000, 68, 1, 1), + PLL_35XX_RATE(147000000, 90, 2, 1), + PLL_35XX_RATE(135000000, 82, 2, 1), + PLL_35XX_RATE(124000000, 116, 1, 2), + PLL_35XX_RATE(118000000, 150, 2, 2), + PLL_35XX_RATE(113000000, 105, 1, 2), + PLL_35XX_RATE(101000000, 127, 2, 2), + PLL_35XX_RATE(90000000, 112, 2, 2), + PLL_35XX_RATE(85000000, 105, 2, 2), + PLL_35XX_RATE(79000000, 71, 1, 2), + PLL_35XX_RATE(68000000, 82, 2, 2), + PLL_35XX_RATE(56000000, 142, 2, 3), + PLL_35XX_RATE(48000000, 120, 2, 3), + PLL_35XX_RATE(51000000, 161, 3, 3), + PLL_35XX_RATE(45000000, 82, 1, 3), + PLL_35XX_RATE(34000000, 82, 2, 3), + { /* sentinel */ }, +}; + +static struct samsung_pll_clock s3c2410_plls[] __initdata = { + [mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti", + LOCKTIME, UPLLCON, NULL), +}; + +struct samsung_div_clock s3c2410_dividers[] __initdata = { + DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1), +}; + +struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = { + /* + * armclk is directly supplied by the fclk, without + * switching possibility like on the s3c244x below. + */ + FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0), + + /* uclk is fed from the unmodified upll */ + FFACTOR(UCLK, "uclk", "upll", 1, 1, 0), +}; + +struct samsung_clock_alias s3c2410_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"), + ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"), + ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"), + ALIAS(UCLK, NULL, "clk_uart_baud1"), +}; + +/* S3C244x specific clocks */ + +static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = { + /* sorted in descending order */ + PLL_35XX_RATE(400000000, 0x5c, 1, 1), + PLL_35XX_RATE(390000000, 0x7a, 2, 1), + PLL_35XX_RATE(380000000, 0x57, 1, 1), + PLL_35XX_RATE(370000000, 0xb1, 4, 1), + PLL_35XX_RATE(360000000, 0x70, 2, 1), + PLL_35XX_RATE(350000000, 0xa7, 4, 1), + PLL_35XX_RATE(340000000, 0x4d, 1, 1), + PLL_35XX_RATE(330000000, 0x66, 2, 1), + PLL_35XX_RATE(320000000, 0x98, 4, 1), + PLL_35XX_RATE(310000000, 0x93, 4, 1), + PLL_35XX_RATE(300000000, 0x75, 3, 1), + PLL_35XX_RATE(240000000, 0x70, 1, 2), + PLL_35XX_RATE(230000000, 0x6b, 1, 2), + PLL_35XX_RATE(220000000, 0x66, 1, 2), + PLL_35XX_RATE(210000000, 0x84, 2, 2), + PLL_35XX_RATE(200000000, 0x5c, 1, 2), + PLL_35XX_RATE(190000000, 0x57, 1, 2), + PLL_35XX_RATE(180000000, 0x70, 2, 2), + PLL_35XX_RATE(170000000, 0x4d, 1, 2), + PLL_35XX_RATE(160000000, 0x98, 4, 2), + PLL_35XX_RATE(150000000, 0x75, 3, 2), + PLL_35XX_RATE(120000000, 0x70, 1, 3), + PLL_35XX_RATE(110000000, 0x66, 1, 3), + PLL_35XX_RATE(100000000, 0x5c, 1, 3), + PLL_35XX_RATE(90000000, 0x70, 2, 3), + PLL_35XX_RATE(80000000, 0x98, 4, 3), + PLL_35XX_RATE(75000000, 0x75, 3, 3), + { /* sentinel */ }, +}; + +static struct samsung_pll_clock s3c244x_common_plls[] __initdata = { + [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti", + LOCKTIME, UPLLCON, NULL), +}; + +PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" }; +PNAME(armclk_p) = { "fclk", "hclk" }; + +struct samsung_mux_clock s3c244x_common_muxes[] __initdata = { + MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2), + MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1), +}; + +struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = { + FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0), + FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT), +}; + +static struct clk_div_table div_hclk_4_d[] = { + { .val = 0, .div = 4 }, + { .val = 1, .div = 8 }, + { /* sentinel */ }, +}; + +static struct clk_div_table div_hclk_3_d[] = { + { .val = 0, .div = 3 }, + { .val = 1, .div = 6 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c244x_common_dividers[] __initdata = { + DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1), + DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1), + DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d), + DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d), + DIV(0, "div_cam", "upll", CAMDIVN, 0, 3), +}; + +struct samsung_gate_clock s3c244x_common_gates[] __initdata = { + GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0), +}; + +struct samsung_clock_alias s3c244x_common_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"), + ALIAS(HCLK_CAM, NULL, "camif"), + ALIAS(CAMIF, NULL, "camif-upll"), +}; + +/* S3C2440 specific clocks */ + +PNAME(s3c2440_camif_p) = { "upll", "ff_cam" }; + +struct samsung_mux_clock s3c2440_muxes[] __initdata = { + MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1), +}; + +struct samsung_gate_clock s3c2440_gates[] __initdata = { + GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0), +}; + +/* S3C2442 specific clocks */ + +struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = { + FFACTOR(0, "upll_3", "upll", 1, 3, 0), +}; + +PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" }; + +struct samsung_mux_clock s3c2442_muxes[] __initdata = { + MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +#define XTI 1 +struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = { + FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2410_common_clk_register_fixed_ext(unsigned long xti_f) +{ + struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal"); + + s3c2410_common_frate_clks[0].fixed_rate = xti_f; + samsung_clk_register_fixed_rate(s3c2410_common_frate_clks, + ARRAY_SIZE(s3c2410_common_frate_clks)); + + samsung_clk_register_alias(&xti_alias, 1); +} + +void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *base) +{ + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + samsung_clk_init(np, reg_base, NR_CLKS); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2410_common_clk_register_fixed_ext(xti_f); + + if (current_soc == 2410) { + if (_get_rate("xti") == 12 * MHZ) { + s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl; + s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl; + } + + /* Register PLLs. */ + samsung_clk_register_pll(s3c2410_plls, + ARRAY_SIZE(s3c2410_plls), reg_base); + + } else { /* S3C2440, S3C2442 */ + if (_get_rate("xti") == 12 * MHZ) { + /* + * plls follow different calculation schemes, with the + * upll following the same scheme as the s3c2410 plls + */ + s3c244x_common_plls[mpll].rate_table = + pll_s3c244x_12mhz_tbl; + s3c244x_common_plls[upll].rate_table = + pll_s3c2410_12mhz_tbl; + } + + /* Register PLLs. */ + samsung_clk_register_pll(s3c244x_common_plls, + ARRAY_SIZE(s3c244x_common_plls), reg_base); + } + + /* Register common internal clocks. */ + samsung_clk_register_mux(s3c2410_common_muxes, + ARRAY_SIZE(s3c2410_common_muxes)); + samsung_clk_register_div(s3c2410_common_dividers, + ARRAY_SIZE(s3c2410_common_dividers)); + samsung_clk_register_gate(s3c2410_common_gates, + ARRAY_SIZE(s3c2410_common_gates)); + + if (current_soc == S3C2440 || current_soc == S3C2442) { + samsung_clk_register_div(s3c244x_common_dividers, + ARRAY_SIZE(s3c244x_common_dividers)); + samsung_clk_register_gate(s3c244x_common_gates, + ARRAY_SIZE(s3c244x_common_gates)); + samsung_clk_register_mux(s3c244x_common_muxes, + ARRAY_SIZE(s3c244x_common_muxes)); + samsung_clk_register_fixed_factor(s3c244x_common_ffactor, + ARRAY_SIZE(s3c244x_common_ffactor)); + } + + /* Register SoC-specific clocks. */ + switch (current_soc) { + case S3C2410: + samsung_clk_register_div(s3c2410_dividers, + ARRAY_SIZE(s3c2410_dividers)); + samsung_clk_register_fixed_factor(s3c2410_ffactor, + ARRAY_SIZE(s3c2410_ffactor)); + samsung_clk_register_alias(s3c2410_aliases, + ARRAY_SIZE(s3c2410_common_aliases)); + break; + case S3C2440: + samsung_clk_register_mux(s3c2440_muxes, + ARRAY_SIZE(s3c2440_muxes)); + samsung_clk_register_gate(s3c2440_gates, + ARRAY_SIZE(s3c2440_gates)); + break; + case S3C2442: + samsung_clk_register_mux(s3c2442_muxes, + ARRAY_SIZE(s3c2442_muxes)); + samsung_clk_register_fixed_factor(s3c2442_ffactor, + ARRAY_SIZE(s3c2442_ffactor)); + break; + } + + /* + * Register common aliases at the end, as some of the aliased clocks + * are SoC specific. + */ + samsung_clk_register_alias(s3c2410_common_aliases, + ARRAY_SIZE(s3c2410_common_aliases)); + + if (current_soc == S3C2440 || current_soc == S3C2442) { + samsung_clk_register_alias(s3c244x_common_aliases, + ARRAY_SIZE(s3c244x_common_aliases)); + } + + s3c2410_clk_sleep_init(); +} + +static void __init s3c2410_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2410, 0); +} +CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init); + +static void __init s3c2440_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2440, 0); +} +CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init); + +static void __init s3c2442_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2442, 0); +} +CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init); diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c new file mode 100644 index 00000000000..0f11a07d5c0 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2412.c @@ -0,0 +1,269 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2412 and S3C2413. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/s3c2412.h> + +#include "clk.h" +#include "clk-pll.h" + +#define LOCKTIME 0x00 +#define MPLLCON 0x04 +#define UPLLCON 0x08 +#define CLKCON 0x0c +#define CLKDIVN 0x14 +#define CLKSRC 0x1c + +/* list of PLLs to be registered */ +enum s3c2412_plls { + mpll, upll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2412_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2412_clk_regs[] __initdata = { + LOCKTIME, + MPLLCON, + UPLLCON, + CLKCON, + CLKDIVN, + CLKSRC, +}; + +static int s3c2412_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2412_save, + ARRAY_SIZE(s3c2412_clk_regs)); + + return 0; +} + +static void s3c2412_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2412_save, + ARRAY_SIZE(s3c2412_clk_regs)); +} + +static struct syscore_ops s3c2412_clk_syscore_ops = { + .suspend = s3c2412_clk_suspend, + .resume = s3c2412_clk_resume, +}; + +static void s3c2412_clk_sleep_init(void) +{ + s3c2412_save = samsung_clk_alloc_reg_dump(s3c2412_clk_regs, + ARRAY_SIZE(s3c2412_clk_regs)); + if (!s3c2412_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2412_clk_syscore_ops); + return; +} +#else +static void s3c2412_clk_sleep_init(void) {} +#endif + +static struct clk_div_table divxti_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 6 }, + { .val = 4, .div = 8 }, + { .val = 5, .div = 10 }, + { .val = 6, .div = 12 }, + { .val = 7, .div = 14 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2412_dividers[] __initdata = { + DIV_T(0, "div_xti", "xti", CLKSRC, 0, 3, divxti_d), + DIV(0, "div_cam", "mux_cam", CLKDIVN, 16, 4), + DIV(0, "div_i2s", "mux_i2s", CLKDIVN, 12, 4), + DIV(0, "div_uart", "mux_uart", CLKDIVN, 8, 4), + DIV(0, "div_usb", "mux_usb", CLKDIVN, 6, 1), + DIV(0, "div_hclk_half", "hclk", CLKDIVN, 5, 1), + DIV(ARMDIV, "armdiv", "msysclk", CLKDIVN, 3, 1), + DIV(PCLK, "pclk", "hclk", CLKDIVN, 2, 1), + DIV(HCLK, "hclk", "armdiv", CLKDIVN, 0, 2), +}; + +struct samsung_fixed_factor_clock s3c2412_ffactor[] __initdata = { + FFACTOR(0, "ff_hclk", "hclk", 2, 1, CLK_SET_RATE_PARENT), +}; + +/* + * The first two use the OM[4] setting, which is not readable from + * software, so assume it is set to xti. + */ +PNAME(erefclk_p) = { "xti", "xti", "xti", "ext" }; +PNAME(urefclk_p) = { "xti", "xti", "xti", "ext" }; + +PNAME(camclk_p) = { "usysclk", "hclk" }; +PNAME(usbclk_p) = { "usysclk", "hclk" }; +PNAME(i2sclk_p) = { "erefclk", "mpll" }; +PNAME(uartclk_p) = { "erefclk", "mpll" }; +PNAME(usysclk_p) = { "urefclk", "upll" }; +PNAME(msysclk_p) = { "mdivclk", "mpll" }; +PNAME(mdivclk_p) = { "xti", "div_xti" }; +PNAME(armclk_p) = { "armdiv", "hclk" }; + +struct samsung_mux_clock s3c2412_muxes[] __initdata = { + MUX(0, "erefclk", erefclk_p, CLKSRC, 14, 2), + MUX(0, "urefclk", urefclk_p, CLKSRC, 12, 2), + MUX(0, "mux_cam", camclk_p, CLKSRC, 11, 1), + MUX(0, "mux_usb", usbclk_p, CLKSRC, 10, 1), + MUX(0, "mux_i2s", i2sclk_p, CLKSRC, 9, 1), + MUX(0, "mux_uart", uartclk_p, CLKSRC, 8, 1), + MUX(USYSCLK, "usysclk", usysclk_p, CLKSRC, 5, 1), + MUX(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1), + MUX(MDIVCLK, "mdivclk", mdivclk_p, CLKSRC, 3, 1), + MUX(ARMCLK, "armclk", armclk_p, CLKDIVN, 4, 1), +}; + +static struct samsung_pll_clock s3c2412_plls[] __initdata = { + [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "urefclk", + LOCKTIME, UPLLCON, NULL), +}; + +struct samsung_gate_clock s3c2412_gates[] __initdata = { + GATE(PCLK_WDT, "wdt", "pclk", CLKCON, 28, 0, 0), + GATE(PCLK_SPI, "spi", "pclk", CLKCON, 27, 0, 0), + GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 26, 0, 0), + GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 25, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", CLKCON, 24, 0, 0), + GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 23, 0, 0), + GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 22, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 21, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 20, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 19, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 18, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 17, 0, 0), + GATE(PCLK_USBD, "usb-device", "pclk", CLKCON, 16, 0, 0), + GATE(SCLK_CAM, "sclk_cam", "div_cam", CLKCON, 15, 0, 0), + GATE(SCLK_UART, "sclk_uart", "div_uart", CLKCON, 14, 0, 0), + GATE(SCLK_I2S, "sclk_i2s", "div_i2s", CLKCON, 13, 0, 0), + GATE(SCLK_USBH, "sclk_usbh", "div_usb", CLKCON, 12, 0, 0), + GATE(SCLK_USBD, "sclk_usbd", "div_usb", CLKCON, 11, 0, 0), + GATE(HCLK_HALF, "hclk_half", "div_hclk_half", CLKCON, 10, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_X2, "hclkx2", "ff_hclk", CLKCON, 9, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_SDRAM, "sdram", "hclk", CLKCON, 8, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0), + GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0), + GATE(HCLK_DMA3, "dma3", "hclk", CLKCON, 3, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA2, "dma2", "hclk", CLKCON, 2, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA1, "dma1", "hclk", CLKCON, 1, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA0, "dma0", "hclk", CLKCON, 0, CLK_IGNORE_UNUSED, 0), +}; + +struct samsung_clock_alias s3c2412_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2412-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2412-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2412-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2412-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2412-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2412-uart.2", "clk_uart_baud2"), + ALIAS(SCLK_UART, NULL, "clk_uart_baud3"), + ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(PCLK_USBD, NULL, "usb-device"), + ALIAS(SCLK_USBD, NULL, "usb-bus-gadget"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(SCLK_USBH, NULL, "usb-bus-host"), + ALIAS(ARMCLK, NULL, "armclk"), + ALIAS(HCLK, NULL, "hclk"), + ALIAS(MPLL, NULL, "mpll"), + ALIAS(MSYSCLK, NULL, "fclk"), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +#define XTI 1 +struct samsung_fixed_rate_clock s3c2412_common_frate_clks[] __initdata = { + FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2412_common_clk_register_fixed_ext(unsigned long xti_f, + unsigned long ext_f) +{ + /* xtal alias is necessary for the current cpufreq driver */ + struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal"); + + s3c2412_common_frate_clks[0].fixed_rate = xti_f; + s3c2412_common_frate_clks[1].fixed_rate = ext_f; + samsung_clk_register_fixed_rate(s3c2412_common_frate_clks, + ARRAY_SIZE(s3c2412_common_frate_clks)); + + samsung_clk_register_alias(&xti_alias, 1); +} + +void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *base) +{ + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + samsung_clk_init(np, reg_base, NR_CLKS); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2412_common_clk_register_fixed_ext(xti_f, ext_f); + + /* Register PLLs. */ + samsung_clk_register_pll(s3c2412_plls, ARRAY_SIZE(s3c2412_plls), + reg_base); + + /* Register common internal clocks. */ + samsung_clk_register_mux(s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes)); + samsung_clk_register_div(s3c2412_dividers, + ARRAY_SIZE(s3c2412_dividers)); + samsung_clk_register_gate(s3c2412_gates, ARRAY_SIZE(s3c2412_gates)); + samsung_clk_register_fixed_factor(s3c2412_ffactor, + ARRAY_SIZE(s3c2412_ffactor)); + samsung_clk_register_alias(s3c2412_aliases, + ARRAY_SIZE(s3c2412_aliases)); + + s3c2412_clk_sleep_init(); +} + +static void __init s3c2412_clk_init(struct device_node *np) +{ + s3c2412_common_clk_init(np, 0, 0, 0); +} +CLK_OF_DECLARE(s3c2412_clk, "samsung,s3c2412-clock", s3c2412_clk_init); diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c new file mode 100644 index 00000000000..8e4f4517e95 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2443.c @@ -0,0 +1,462 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2443 and following SoCs. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/s3c2443.h> + +#include "clk.h" +#include "clk-pll.h" + +/* S3C2416 clock controller register offsets */ +#define LOCKCON0 0x00 +#define LOCKCON1 0x04 +#define MPLLCON 0x10 +#define EPLLCON 0x18 +#define EPLLCON_K 0x1C +#define CLKSRC 0x20 +#define CLKDIV0 0x24 +#define CLKDIV1 0x28 +#define CLKDIV2 0x2C +#define HCLKCON 0x30 +#define PCLKCON 0x34 +#define SCLKCON 0x38 + +/* the soc types */ +enum supported_socs { + S3C2416, + S3C2443, + S3C2450, +}; + +/* list of PLLs to be registered */ +enum s3c2443_plls { + mpll, epll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2443_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2443_clk_regs[] __initdata = { + LOCKCON0, + LOCKCON1, + MPLLCON, + EPLLCON, + EPLLCON_K, + CLKSRC, + CLKDIV0, + CLKDIV1, + CLKDIV2, + PCLKCON, + HCLKCON, + SCLKCON, +}; + +static int s3c2443_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2443_save, + ARRAY_SIZE(s3c2443_clk_regs)); + + return 0; +} + +static void s3c2443_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2443_save, + ARRAY_SIZE(s3c2443_clk_regs)); +} + +static struct syscore_ops s3c2443_clk_syscore_ops = { + .suspend = s3c2443_clk_suspend, + .resume = s3c2443_clk_resume, +}; + +static void s3c2443_clk_sleep_init(void) +{ + s3c2443_save = samsung_clk_alloc_reg_dump(s3c2443_clk_regs, + ARRAY_SIZE(s3c2443_clk_regs)); + if (!s3c2443_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2443_clk_syscore_ops); + return; +} +#else +static void s3c2443_clk_sleep_init(void) {} +#endif + +PNAME(epllref_p) = { "mpllref", "mpllref", "xti", "ext" }; +PNAME(esysclk_p) = { "epllref", "epll" }; +PNAME(mpllref_p) = { "xti", "mdivclk" }; +PNAME(msysclk_p) = { "mpllref", "mpll" }; +PNAME(armclk_p) = { "armdiv" , "hclk" }; +PNAME(i2s0_p) = { "div_i2s0", "ext_i2s", "epllref", "epllref" }; + +struct samsung_mux_clock s3c2443_common_muxes[] __initdata = { + MUX(0, "epllref", epllref_p, CLKSRC, 7, 2), + MUX(ESYSCLK, "esysclk", esysclk_p, CLKSRC, 6, 1), + MUX(0, "mpllref", mpllref_p, CLKSRC, 3, 1), + MUX_A(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1, "msysclk"), + MUX_A(ARMCLK, "armclk", armclk_p, CLKDIV0, 13, 1, "armclk"), + MUX(0, "mux_i2s0", i2s0_p, CLKSRC, 14, 2), +}; + +static struct clk_div_table hclk_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 3, .div = 4 }, + { /* sentinel */ }, +}; + +static struct clk_div_table mdivclk_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 3 }, + { .val = 2, .div = 5 }, + { .val = 3, .div = 7 }, + { .val = 4, .div = 9 }, + { .val = 5, .div = 11 }, + { .val = 6, .div = 13 }, + { .val = 7, .div = 15 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2443_common_dividers[] __initdata = { + DIV_T(0, "mdivclk", "xti", CLKDIV0, 6, 3, mdivclk_d), + DIV(0, "prediv", "msysclk", CLKDIV0, 4, 2), + DIV_T(HCLK, "hclk", "prediv", CLKDIV0, 0, 2, hclk_d), + DIV(PCLK, "pclk", "hclk", CLKDIV0, 2, 1), + DIV(0, "div_hsspi0_epll", "esysclk", CLKDIV1, 24, 2), + DIV(0, "div_fimd", "esysclk", CLKDIV1, 16, 8), + DIV(0, "div_i2s0", "esysclk", CLKDIV1, 12, 4), + DIV(0, "div_uart", "esysclk", CLKDIV1, 8, 4), + DIV(0, "div_hsmmc1", "esysclk", CLKDIV1, 6, 2), + DIV(0, "div_usbhost", "esysclk", CLKDIV1, 4, 2), +}; + +struct samsung_gate_clock s3c2443_common_gates[] __initdata = { + GATE(SCLK_HSMMC_EXT, "sclk_hsmmcext", "ext", SCLKCON, 13, 0, 0), + GATE(SCLK_HSMMC1, "sclk_hsmmc1", "div_hsmmc1", SCLKCON, 12, 0, 0), + GATE(SCLK_FIMD, "sclk_fimd", "div_fimd", SCLKCON, 10, 0, 0), + GATE(SCLK_I2S0, "sclk_i2s0", "mux_i2s0", SCLKCON, 9, 0, 0), + GATE(SCLK_UART, "sclk_uart", "div_uart", SCLKCON, 8, 0, 0), + GATE(SCLK_USBH, "sclk_usbhost", "div_usbhost", SCLKCON, 1, 0, 0), + GATE(HCLK_DRAM, "dram", "hclk", HCLKCON, 19, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_SSMC, "ssmc", "hclk", HCLKCON, 18, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_HSMMC1, "hsmmc1", "hclk", HCLKCON, 16, 0, 0), + GATE(HCLK_USBD, "usb-device", "hclk", HCLKCON, 12, 0, 0), + GATE(HCLK_USBH, "usb-host", "hclk", HCLKCON, 11, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", HCLKCON, 9, 0, 0), + GATE(HCLK_DMA5, "dma5", "hclk", HCLKCON, 5, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA4, "dma4", "hclk", HCLKCON, 4, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA3, "dma3", "hclk", HCLKCON, 3, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA2, "dma2", "hclk", HCLKCON, 2, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA1, "dma1", "hclk", HCLKCON, 1, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA0, "dma0", "hclk", HCLKCON, 0, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_GPIO, "gpio", "pclk", PCLKCON, 13, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_RTC, "rtc", "pclk", PCLKCON, 12, 0, 0), + GATE(PCLK_WDT, "wdt", "pclk", PCLKCON, 11, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", PCLKCON, 10, 0, 0), + GATE(PCLK_I2S0, "i2s0", "pclk", PCLKCON, 9, 0, 0), + GATE(PCLK_AC97, "ac97", "pclk", PCLKCON, 8, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", PCLKCON, 7, 0, 0), + GATE(PCLK_SPI0, "spi0", "pclk", PCLKCON, 6, 0, 0), + GATE(PCLK_I2C0, "i2c0", "pclk", PCLKCON, 4, 0, 0), + GATE(PCLK_UART3, "uart3", "pclk", PCLKCON, 3, 0, 0), + GATE(PCLK_UART2, "uart2", "pclk", PCLKCON, 2, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", PCLKCON, 1, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", PCLKCON, 0, 0, 0), +}; + +struct samsung_clock_alias s3c2443_common_aliases[] __initdata = { + ALIAS(HCLK, NULL, "hclk"), + ALIAS(HCLK_SSMC, NULL, "nand"), + ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"), + ALIAS(PCLK_UART3, "s3c2440-uart.3", "uart"), + ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"), + ALIAS(PCLK_UART3, "s3c2440-uart.3", "clk_uart_baud2"), + ALIAS(SCLK_UART, NULL, "clk_uart_baud3"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_WDT, NULL, "watchdog"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_I2C0, "s3c2410-i2c.0", "i2c"), + ALIAS(HCLK_USBD, NULL, "usb-device"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(SCLK_USBH, NULL, "usb-bus-host"), + ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi"), + ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi_busclk0"), + ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "hsmmc"), + ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"), + ALIAS(PCLK_I2S0, "samsung-i2s.0", "iis"), + ALIAS(SCLK_I2S0, NULL, "i2s-if"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(SCLK_FIMD, NULL, "sclk_fimd"), +}; + +/* S3C2416 specific clocks */ + +static struct samsung_pll_clock s3c2416_pll_clks[] __initdata = { + [mpll] = PLL(pll_6552_s3c2416, 0, "mpll", "mpllref", + LOCKCON0, MPLLCON, NULL), + [epll] = PLL(pll_6553, 0, "epll", "epllref", + LOCKCON1, EPLLCON, NULL), +}; + +PNAME(s3c2416_hsmmc0_p) = { "sclk_hsmmc0", "sclk_hsmmcext" }; +PNAME(s3c2416_hsmmc1_p) = { "sclk_hsmmc1", "sclk_hsmmcext" }; +PNAME(s3c2416_hsspi0_p) = { "hsspi0_epll", "hsspi0_mpll" }; + +static struct clk_div_table armdiv_s3c2416_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 3, .div = 4 }, + { .val = 5, .div = 6 }, + { .val = 7, .div = 8 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2416_dividers[] __initdata = { + DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 3, armdiv_s3c2416_d), + DIV(0, "div_hsspi0_mpll", "msysclk", CLKDIV2, 0, 4), + DIV(0, "div_hsmmc0", "esysclk", CLKDIV2, 6, 2), +}; + +struct samsung_mux_clock s3c2416_muxes[] __initdata = { + MUX(MUX_HSMMC0, "mux_hsmmc0", s3c2416_hsmmc0_p, CLKSRC, 16, 1), + MUX(MUX_HSMMC1, "mux_hsmmc1", s3c2416_hsmmc1_p, CLKSRC, 17, 1), + MUX(MUX_HSSPI0, "mux_hsspi0", s3c2416_hsspi0_p, CLKSRC, 18, 1), +}; + +struct samsung_gate_clock s3c2416_gates[] __initdata = { + GATE(0, "hsspi0_mpll", "div_hsspi0_mpll", SCLKCON, 19, 0, 0), + GATE(0, "hsspi0_epll", "div_hsspi0_epll", SCLKCON, 14, 0, 0), + GATE(0, "sclk_hsmmc0", "div_hsmmc0", SCLKCON, 6, 0, 0), + GATE(HCLK_2D, "2d", "hclk", HCLKCON, 20, 0, 0), + GATE(HCLK_HSMMC0, "hsmmc0", "hclk", HCLKCON, 15, 0, 0), + GATE(HCLK_IROM, "irom", "hclk", HCLKCON, 13, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_PCM, "pcm", "pclk", PCLKCON, 19, 0, 0), +}; + +struct samsung_clock_alias s3c2416_aliases[] __initdata = { + ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"), + ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"), + ALIAS(MUX_HSMMC0, "s3c-sdhci.0", "mmc_busclk.2"), + ALIAS(MUX_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"), + ALIAS(MUX_HSSPI0, "s3c2443-spi.0", "spi_busclk2"), + ALIAS(ARMDIV, NULL, "armdiv"), +}; + +/* S3C2443 specific clocks */ + +static struct samsung_pll_clock s3c2443_pll_clks[] __initdata = { + [mpll] = PLL(pll_3000, 0, "mpll", "mpllref", + LOCKCON0, MPLLCON, NULL), + [epll] = PLL(pll_2126, 0, "epll", "epllref", + LOCKCON1, EPLLCON, NULL), +}; + +static struct clk_div_table armdiv_s3c2443_d[] = { + { .val = 0, .div = 1 }, + { .val = 8, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 9, .div = 4 }, + { .val = 10, .div = 6 }, + { .val = 11, .div = 8 }, + { .val = 13, .div = 12 }, + { .val = 15, .div = 16 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2443_dividers[] __initdata = { + DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 4, armdiv_s3c2443_d), + DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4), +}; + +struct samsung_gate_clock s3c2443_gates[] __initdata = { + GATE(SCLK_HSSPI0, "sclk_hsspi0", "div_hsspi0_epll", SCLKCON, 14, 0, 0), + GATE(SCLK_CAM, "sclk_cam", "div_cam", SCLKCON, 11, 0, 0), + GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0), + GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 15, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", PCLKCON, 5, 0, 0), +}; + +struct samsung_clock_alias s3c2443_aliases[] __initdata = { + ALIAS(SCLK_HSSPI0, "s3c2443-spi.0", "spi_busclk2"), + ALIAS(SCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"), + ALIAS(SCLK_CAM, NULL, "camif-upll"), + ALIAS(PCLK_SPI1, "s3c2410-spi.0", "spi"), + ALIAS(PCLK_SDI, NULL, "sdi"), + ALIAS(HCLK_CFC, NULL, "cfc"), + ALIAS(ARMDIV, NULL, "armdiv"), +}; + +/* S3C2450 specific clocks */ + +PNAME(s3c2450_cam_p) = { "div_cam", "hclk" }; +PNAME(s3c2450_hsspi1_p) = { "hsspi1_epll", "hsspi1_mpll" }; +PNAME(i2s1_p) = { "div_i2s1", "ext_i2s", "epllref", "epllref" }; + +struct samsung_div_clock s3c2450_dividers[] __initdata = { + DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4), + DIV(0, "div_hsspi1_epll", "esysclk", CLKDIV2, 24, 2), + DIV(0, "div_hsspi1_mpll", "msysclk", CLKDIV2, 16, 4), + DIV(0, "div_i2s1", "esysclk", CLKDIV2, 12, 4), +}; + +struct samsung_mux_clock s3c2450_muxes[] __initdata = { + MUX(0, "mux_cam", s3c2450_cam_p, CLKSRC, 20, 1), + MUX(MUX_HSSPI1, "mux_hsspi1", s3c2450_hsspi1_p, CLKSRC, 19, 1), + MUX(0, "mux_i2s1", i2s1_p, CLKSRC, 12, 2), +}; + +struct samsung_gate_clock s3c2450_gates[] __initdata = { + GATE(SCLK_I2S1, "sclk_i2s1", "div_i2s1", SCLKCON, 5, 0, 0), + GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, 0, 0), + GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0), + GATE(HCLK_DMA7, "dma7", "hclk", HCLKCON, 7, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA6, "dma6", "hclk", HCLKCON, 6, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_I2S1, "i2s1", "pclk", PCLKCON, 17, 0, 0), + GATE(PCLK_I2C1, "i2c1", "pclk", PCLKCON, 16, 0, 0), + GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 14, 0, 0), +}; + +struct samsung_clock_alias s3c2450_aliases[] __initdata = { + ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi"), + ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi_busclk0"), + ALIAS(MUX_HSSPI1, "s3c2443-spi.1", "spi_busclk2"), + ALIAS(PCLK_I2C1, "s3c2410-i2c.1", "i2c"), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +struct samsung_fixed_rate_clock s3c2443_common_frate_clks[] __initdata = { + FRATE(0, "xti", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext_i2s", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext_uart", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2443_common_clk_register_fixed_ext(unsigned long xti_f) +{ + s3c2443_common_frate_clks[0].fixed_rate = xti_f; + samsung_clk_register_fixed_rate(s3c2443_common_frate_clks, + ARRAY_SIZE(s3c2443_common_frate_clks)); +} + +void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *base) +{ + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + samsung_clk_init(np, reg_base, NR_CLKS); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2443_common_clk_register_fixed_ext(xti_f); + + /* Register PLLs. */ + if (current_soc == S3C2416 || current_soc == S3C2450) + samsung_clk_register_pll(s3c2416_pll_clks, + ARRAY_SIZE(s3c2416_pll_clks), reg_base); + else + samsung_clk_register_pll(s3c2443_pll_clks, + ARRAY_SIZE(s3c2443_pll_clks), reg_base); + + /* Register common internal clocks. */ + samsung_clk_register_mux(s3c2443_common_muxes, + ARRAY_SIZE(s3c2443_common_muxes)); + samsung_clk_register_div(s3c2443_common_dividers, + ARRAY_SIZE(s3c2443_common_dividers)); + samsung_clk_register_gate(s3c2443_common_gates, + ARRAY_SIZE(s3c2443_common_gates)); + samsung_clk_register_alias(s3c2443_common_aliases, + ARRAY_SIZE(s3c2443_common_aliases)); + + /* Register SoC-specific clocks. */ + switch (current_soc) { + case S3C2450: + samsung_clk_register_div(s3c2450_dividers, + ARRAY_SIZE(s3c2450_dividers)); + samsung_clk_register_mux(s3c2450_muxes, + ARRAY_SIZE(s3c2450_muxes)); + samsung_clk_register_gate(s3c2450_gates, + ARRAY_SIZE(s3c2450_gates)); + samsung_clk_register_alias(s3c2450_aliases, + ARRAY_SIZE(s3c2450_aliases)); + /* fall through, as s3c2450 extends the s3c2416 clocks */ + case S3C2416: + samsung_clk_register_div(s3c2416_dividers, + ARRAY_SIZE(s3c2416_dividers)); + samsung_clk_register_mux(s3c2416_muxes, + ARRAY_SIZE(s3c2416_muxes)); + samsung_clk_register_gate(s3c2416_gates, + ARRAY_SIZE(s3c2416_gates)); + samsung_clk_register_alias(s3c2416_aliases, + ARRAY_SIZE(s3c2416_aliases)); + break; + case S3C2443: + samsung_clk_register_div(s3c2443_dividers, + ARRAY_SIZE(s3c2443_dividers)); + samsung_clk_register_gate(s3c2443_gates, + ARRAY_SIZE(s3c2443_gates)); + samsung_clk_register_alias(s3c2443_aliases, + ARRAY_SIZE(s3c2443_aliases)); + break; + } + + s3c2443_clk_sleep_init(); +} + +static void __init s3c2416_clk_init(struct device_node *np) +{ + s3c2443_common_clk_init(np, 0, S3C2416, 0); +} +CLK_OF_DECLARE(s3c2416_clk, "samsung,s3c2416-clock", s3c2416_clk_init); + +static void __init s3c2443_clk_init(struct device_node *np) +{ + s3c2443_common_clk_init(np, 0, S3C2443, 0); +} +CLK_OF_DECLARE(s3c2443_clk, "samsung,s3c2443-clock", s3c2443_clk_init); + +static void __init s3c2450_clk_init(struct device_node *np) +{ + s3c2443_common_clk_init(np, 0, S3C2450, 0); +} +CLK_OF_DECLARE(s3c2450_clk, "samsung,s3c2450-clock", s3c2450_clk_init); diff --git a/drivers/clk/versatile/Kconfig b/drivers/clk/versatile/Kconfig new file mode 100644 index 00000000000..1530c9352a7 --- /dev/null +++ b/drivers/clk/versatile/Kconfig @@ -0,0 +1,26 @@ +config COMMON_CLK_VERSATILE + bool "Clock driver for ARM Reference designs" + depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS || ARM64 + ---help--- + Supports clocking on ARM Reference designs: + - Integrator/AP and Integrator/CP + - RealView PB1176, EB, PB11MP and PBX + - Versatile Express + +config CLK_SP810 + bool "Clock driver for ARM SP810 System Controller" + depends on COMMON_CLK_VERSATILE + default y if ARCH_VEXPRESS + ---help--- + Supports clock muxing (REFCLK/TIMCLK to TIMERCLKEN0-3) capabilities + of the ARM SP810 System Controller cell. + +config CLK_VEXPRESS_OSC + bool "Clock driver for Versatile Express OSC clock generators" + depends on COMMON_CLK_VERSATILE + depends on VEXPRESS_CONFIG + default y if ARCH_VEXPRESS + ---help--- + Simple regmap-based driver driving clock generators on Versatile + Express platforms hidden behind its configuration infrastructure, + commonly known as OSCs. diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile index c16ca787170..fd449f9b006 100644 --- a/drivers/clk/versatile/Makefile +++ b/drivers/clk/versatile/Makefile @@ -3,5 +3,6 @@ obj-$(CONFIG_ICST) += clk-icst.o obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o -obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o clk-sp810.o -obj-$(CONFIG_VEXPRESS_CONFIG) += clk-vexpress-osc.o +obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o +obj-$(CONFIG_CLK_SP810) += clk-sp810.o +obj-$(CONFIG_CLK_VEXPRESS_OSC) += clk-vexpress-osc.o diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c index 422391242b3..529a59c0fbf 100644 --- a/drivers/clk/versatile/clk-vexpress-osc.c +++ b/drivers/clk/versatile/clk-vexpress-osc.c @@ -11,8 +11,6 @@ * Copyright (C) 2012 ARM Limited */ -#define pr_fmt(fmt) "vexpress-osc: " fmt - #include <linux/clkdev.h> #include <linux/clk-provider.h> #include <linux/err.h> @@ -22,7 +20,7 @@ #include <linux/vexpress.h> struct vexpress_osc { - struct vexpress_config_func *func; + struct regmap *reg; struct clk_hw hw; unsigned long rate_min; unsigned long rate_max; @@ -36,7 +34,7 @@ static unsigned long vexpress_osc_recalc_rate(struct clk_hw *hw, struct vexpress_osc *osc = to_vexpress_osc(hw); u32 rate; - vexpress_config_read(osc->func, 0, &rate); + regmap_read(osc->reg, 0, &rate); return rate; } @@ -60,7 +58,7 @@ static int vexpress_osc_set_rate(struct clk_hw *hw, unsigned long rate, { struct vexpress_osc *osc = to_vexpress_osc(hw); - return vexpress_config_write(osc->func, 0, rate); + return regmap_write(osc->reg, 0, rate); } static struct clk_ops vexpress_osc_ops = { @@ -70,58 +68,31 @@ static struct clk_ops vexpress_osc_ops = { }; -struct clk * __init vexpress_osc_setup(struct device *dev) -{ - struct clk_init_data init; - struct vexpress_osc *osc = kzalloc(sizeof(*osc), GFP_KERNEL); - - if (!osc) - return NULL; - - osc->func = vexpress_config_func_get_by_dev(dev); - if (!osc->func) { - kfree(osc); - return NULL; - } - - init.name = dev_name(dev); - init.ops = &vexpress_osc_ops; - init.flags = CLK_IS_ROOT; - init.num_parents = 0; - osc->hw.init = &init; - - return clk_register(NULL, &osc->hw); -} - -void __init vexpress_osc_of_setup(struct device_node *node) +static int vexpress_osc_probe(struct platform_device *pdev) { + struct clk_lookup *cl = pdev->dev.platform_data; /* Non-DT lookup */ struct clk_init_data init; struct vexpress_osc *osc; struct clk *clk; u32 range[2]; - vexpress_sysreg_of_early_init(); - - osc = kzalloc(sizeof(*osc), GFP_KERNEL); + osc = devm_kzalloc(&pdev->dev, sizeof(*osc), GFP_KERNEL); if (!osc) - return; + return -ENOMEM; - osc->func = vexpress_config_func_get_by_node(node); - if (!osc->func) { - pr_err("Failed to obtain config func for node '%s'!\n", - node->full_name); - goto error; - } + osc->reg = devm_regmap_init_vexpress_config(&pdev->dev); + if (IS_ERR(osc->reg)) + return PTR_ERR(osc->reg); - if (of_property_read_u32_array(node, "freq-range", range, + if (of_property_read_u32_array(pdev->dev.of_node, "freq-range", range, ARRAY_SIZE(range)) == 0) { osc->rate_min = range[0]; osc->rate_max = range[1]; } - of_property_read_string(node, "clock-output-names", &init.name); - if (!init.name) - init.name = node->full_name; + if (of_property_read_string(pdev->dev.of_node, "clock-output-names", + &init.name) != 0) + init.name = dev_name(&pdev->dev); init.ops = &vexpress_osc_ops; init.flags = CLK_IS_ROOT; @@ -130,20 +101,37 @@ void __init vexpress_osc_of_setup(struct device_node *node) osc->hw.init = &init; clk = clk_register(NULL, &osc->hw); - if (IS_ERR(clk)) { - pr_err("Failed to register clock '%s'!\n", init.name); - goto error; + if (IS_ERR(clk)) + return PTR_ERR(clk); + + of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, clk); + + /* Only happens for non-DT cases */ + if (cl) { + cl->clk = clk; + clkdev_add(cl); } - of_clk_add_provider(node, of_clk_src_simple_get, clk); + dev_dbg(&pdev->dev, "Registered clock '%s'\n", init.name); + + return 0; +} - pr_debug("Registered clock '%s'\n", init.name); +static struct of_device_id vexpress_osc_of_match[] = { + { .compatible = "arm,vexpress-osc", }, + {} +}; - return; +static struct platform_driver vexpress_osc_driver = { + .driver = { + .name = "vexpress-osc", + .of_match_table = vexpress_osc_of_match, + }, + .probe = vexpress_osc_probe, +}; -error: - if (osc->func) - vexpress_config_func_put(osc->func); - kfree(osc); +static int __init vexpress_osc_init(void) +{ + return platform_driver_register(&vexpress_osc_driver); } -CLK_OF_DECLARE(vexpress_soc, "arm,vexpress-osc", vexpress_osc_of_setup); +core_initcall(vexpress_osc_init); diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 96918e1f26a..43f1acf0d1d 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -191,3 +191,14 @@ config EM_TIMER_STI config CLKSRC_QCOM bool + +config CLKSRC_VERSATILE + bool "ARM Versatile (Express) reference platforms clock source" + depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET + select CLKSRC_OF + default y if MFD_VEXPRESS_SYSREG + help + This option enables clock source based on free running + counter available in the "System Registers" block of + ARM Versatile, RealView and Versatile Express reference + platforms. diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 98cb6c51aa8..6f25bdffc17 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -39,3 +39,4 @@ obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o +obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c index 7f5374dbefd..dbd30398222 100644 --- a/drivers/clocksource/timer-marco.c +++ b/drivers/clocksource/timer-marco.c @@ -252,15 +252,13 @@ static void __init sirfsoc_clockevent_init(void) } /* initialize the kernel jiffy timer source */ -static void __init sirfsoc_marco_timer_init(void) +static void __init sirfsoc_marco_timer_init(struct device_node *np) { unsigned long rate; u32 timer_div; struct clk *clk; - /* timer's input clock is io clock */ - clk = clk_get_sys("io", NULL); - + clk = of_clk_get(np, 0); BUG_ON(IS_ERR(clk)); rate = clk_get_rate(clk); @@ -303,6 +301,6 @@ static void __init sirfsoc_of_timer_init(struct device_node *np) if (!sirfsoc_timer1_irq.irq) panic("No irq passed for timer1 via DT\n"); - sirfsoc_marco_timer_init(); + sirfsoc_marco_timer_init(np); } CLOCKSOURCE_OF_DECLARE(sirfsoc_marco_timer, "sirf,marco-tick", sirfsoc_of_timer_init ); diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c index 1a6b2d6356d..a722aac7ac0 100644 --- a/drivers/clocksource/timer-prima2.c +++ b/drivers/clocksource/timer-prima2.c @@ -61,7 +61,8 @@ static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *ce = dev_id; - WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & BIT(0))); + WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & + BIT(0))); /* clear timer0 interrupt */ writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); @@ -77,9 +78,11 @@ static cycle_t sirfsoc_timer_read(struct clocksource *cs) u64 cycles; /* latch the 64-bit timer counter */ - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, + sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI); - cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); + cycles = (cycles << 32) | + readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); return cycles; } @@ -89,11 +92,13 @@ static int sirfsoc_timer_set_next_event(unsigned long delta, { unsigned long now, next; - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, + sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); next = now + delta; writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0); - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, + sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); return next - now > delta ? -ETIME : 0; @@ -108,10 +113,12 @@ static void sirfsoc_timer_set_mode(enum clock_event_mode mode, WARN_ON(1); break; case CLOCK_EVT_MODE_ONESHOT: - writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); + writel_relaxed(val | BIT(0), + sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); break; case CLOCK_EVT_MODE_SHUTDOWN: - writel_relaxed(val & ~BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); + writel_relaxed(val & ~BIT(0), + sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_RESUME: @@ -123,10 +130,13 @@ static void sirfsoc_clocksource_suspend(struct clocksource *cs) { int i; - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, + sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) - sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); + sirfsoc_timer_reg_val[i] = + readl_relaxed(sirfsoc_timer_base + + sirfsoc_timer_reg_list[i]); } static void sirfsoc_clocksource_resume(struct clocksource *cs) @@ -134,10 +144,13 @@ static void sirfsoc_clocksource_resume(struct clocksource *cs) int i; for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) - writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); + writel_relaxed(sirfsoc_timer_reg_val[i], + sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); + writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], + sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); + writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], + sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); } static struct clock_event_device sirfsoc_clockevent = { @@ -185,11 +198,8 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) unsigned long rate; struct clk *clk; - /* timer's input clock is io clock */ - clk = clk_get_sys("io", NULL); - + clk = of_clk_get(np, 0); BUG_ON(IS_ERR(clk)); - rate = clk_get_rate(clk); BUG_ON(rate < PRIMA2_CLOCK_FREQ); @@ -202,7 +212,7 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0); writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1, - sirfsoc_timer_base + SIRFSOC_TIMER_DIV); + sirfsoc_timer_base + SIRFSOC_TIMER_DIV); writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); @@ -216,4 +226,5 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) sirfsoc_clockevent_init(); } -CLOCKSOURCE_OF_DECLARE(sirfsoc_prima2_timer, "sirf,prima2-tick", sirfsoc_prima2_timer_init); +CLOCKSOURCE_OF_DECLARE(sirfsoc_prima2_timer, + "sirf,prima2-tick", sirfsoc_prima2_timer_init); diff --git a/drivers/clocksource/versatile.c b/drivers/clocksource/versatile.c new file mode 100644 index 00000000000..e4c50ad2f9d --- /dev/null +++ b/drivers/clocksource/versatile.c @@ -0,0 +1,40 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2014 ARM Limited + */ + +#include <linux/clocksource.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/sched_clock.h> + +#define SYS_24MHZ 0x05c + +static void __iomem *versatile_sys_24mhz; + +static u32 notrace versatile_sys_24mhz_read(void) +{ + return readl(versatile_sys_24mhz); +} + +static void __init versatile_sched_clock_init(struct device_node *node) +{ + void __iomem *base = of_iomap(node, 0); + + if (!base) + return; + + versatile_sys_24mhz = base + SYS_24MHZ; + + setup_sched_clock(versatile_sys_24mhz_read, 32, 24000000); +} +CLOCKSOURCE_OF_DECLARE(versatile, "arm,vexpress-sysreg", + versatile_sched_clock_init); diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index f99cfe24e7b..e8a4a7ed38c 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -17,6 +17,7 @@ #include <linux/regulator/consumer.h> #include <linux/cpufreq.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <plat/cpu.h> @@ -163,14 +164,22 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) if (!exynos_info) return -ENOMEM; - if (soc_is_exynos4210()) + if (of_machine_is_compatible("samsung,exynos4210")) { + exynos_info->type = EXYNOS_SOC_4210; ret = exynos4210_cpufreq_init(exynos_info); - else if (soc_is_exynos4212() || soc_is_exynos4412()) + } else if (of_machine_is_compatible("samsung,exynos4212")) { + exynos_info->type = EXYNOS_SOC_4212; ret = exynos4x12_cpufreq_init(exynos_info); - else if (soc_is_exynos5250()) + } else if (of_machine_is_compatible("samsung,exynos4412")) { + exynos_info->type = EXYNOS_SOC_4412; + ret = exynos4x12_cpufreq_init(exynos_info); + } else if (of_machine_is_compatible("samsung,exynos5250")) { + exynos_info->type = EXYNOS_SOC_5250; ret = exynos5250_cpufreq_init(exynos_info); - else - return 0; + } else { + pr_err("%s: Unknown SoC type\n", __func__); + return -ENODEV; + } if (ret) goto err_vdd_arm; diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h index 3ddade8a512..f189547bb44 100644 --- a/drivers/cpufreq/exynos-cpufreq.h +++ b/drivers/cpufreq/exynos-cpufreq.h @@ -17,6 +17,13 @@ enum cpufreq_level_index { L20, }; +enum exynos_soc_type { + EXYNOS_SOC_4210, + EXYNOS_SOC_4212, + EXYNOS_SOC_4412, + EXYNOS_SOC_5250, +}; + #define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \ { \ .freq = (f) * 1000, \ @@ -34,6 +41,7 @@ struct apll_freq { }; struct exynos_dvfs_info { + enum exynos_soc_type type; unsigned long mpll_freq_khz; unsigned int pll_safe_idx; struct clk *cpu_clk; diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c index 466c76ad335..63a3907ce57 100644 --- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ b/drivers/cpufreq/exynos4x12-cpufreq.c @@ -100,7 +100,6 @@ static struct apll_freq apll_freq_4412[] = { static void exynos4x12_set_clkdiv(unsigned int div_index) { unsigned int tmp; - unsigned int stat_cpu1; /* Change Divider - CPU0 */ @@ -115,13 +114,11 @@ static void exynos4x12_set_clkdiv(unsigned int div_index) tmp = apll_freq_4x12[div_index].clk_div_cpu1; __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1); - if (soc_is_exynos4212()) - stat_cpu1 = 0x11; - else - stat_cpu1 = 0x111; - while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1) + do { cpu_relax(); + tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1); + } while (tmp != 0x0); } static void exynos4x12_set_apll(unsigned int index) @@ -184,7 +181,7 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) if (IS_ERR(mout_apll)) goto err_mout_apll; - if (soc_is_exynos4212()) + if (info->type == EXYNOS_SOC_4212) apll_freq_4x12 = apll_freq_4212; else apll_freq_4x12 = apll_freq_4412; diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index be1b2b5c975..227ebf7c1ee 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -141,6 +141,7 @@ static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) { + cfg->mpll = _clk_mpll; (cfg->info->set_fvco)(cfg); } diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress.c index 8242b75d96c..611f34c7333 100644 --- a/drivers/hwmon/vexpress.c +++ b/drivers/hwmon/vexpress.c @@ -26,7 +26,7 @@ struct vexpress_hwmon_data { struct device *hwmon_dev; - struct vexpress_config_func *func; + struct regmap *reg; const char *name; }; @@ -53,7 +53,7 @@ static ssize_t vexpress_hwmon_u32_show(struct device *dev, int err; u32 value; - err = vexpress_config_read(data->func, 0, &value); + err = regmap_read(data->reg, 0, &value); if (err) return err; @@ -68,11 +68,11 @@ static ssize_t vexpress_hwmon_u64_show(struct device *dev, int err; u32 value_hi, value_lo; - err = vexpress_config_read(data->func, 0, &value_lo); + err = regmap_read(data->reg, 0, &value_lo); if (err) return err; - err = vexpress_config_read(data->func, 1, &value_hi); + err = regmap_read(data->reg, 1, &value_hi); if (err) return err; @@ -234,9 +234,9 @@ static int vexpress_hwmon_probe(struct platform_device *pdev) type = match->data; data->name = type->name; - data->func = vexpress_config_func_get_by_dev(&pdev->dev); - if (!data->func) - return -ENODEV; + data->reg = devm_regmap_init_vexpress_config(&pdev->dev); + if (IS_ERR(data->reg)) + return PTR_ERR(data->reg); err = sysfs_create_groups(&pdev->dev.kobj, type->attr_groups); if (err) @@ -252,7 +252,6 @@ static int vexpress_hwmon_probe(struct platform_device *pdev) error: sysfs_remove_group(&pdev->dev.kobj, match->data); - vexpress_config_func_put(data->func); return err; } @@ -266,8 +265,6 @@ static int vexpress_hwmon_remove(struct platform_device *pdev) match = of_match_device(vexpress_hwmon_of_match, &pdev->dev); sysfs_remove_group(&pdev->dev.kobj, match->data); - vexpress_config_func_put(data->func); - return 0; } diff --git a/drivers/irqchip/irq-sirfsoc.c b/drivers/irqchip/irq-sirfsoc.c index 581eefe331a..5e54f6d71e7 100644 --- a/drivers/irqchip/irq-sirfsoc.c +++ b/drivers/irqchip/irq-sirfsoc.c @@ -58,7 +58,8 @@ static void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs) handle_IRQ(irqnr, regs); } -static int __init sirfsoc_irq_init(struct device_node *np, struct device_node *parent) +static int __init sirfsoc_irq_init(struct device_node *np, + struct device_node *parent) { void __iomem *base = of_iomap(np, 0); if (!base) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 6de9dfbf61c..39e717797cc 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -487,6 +487,14 @@ config LEDS_BLINKM This option enables support for the BlinkM RGB LED connected through I2C. Say Y to enable support for the BlinkM LED. +config LEDS_VERSATILE + tristate "LED support for the ARM Versatile and RealView" + depends on ARCH_REALVIEW || ARCH_VERSATILE + depends on LEDS_CLASS + help + This option enabled support for the LEDs on the ARM Versatile + and RealView boards. Say Y to enabled these. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 3cd76dbd9be..8b4c956e11b 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o +obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/arch/arm/plat-versatile/leds.c b/drivers/leds/leds-versatile.c index d2490d00b46..80553022d66 100644 --- a/arch/arm/plat-versatile/leds.c +++ b/drivers/leds/leds-versatile.c @@ -7,22 +7,14 @@ */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/module.h> #include <linux/io.h> #include <linux/slab.h> #include <linux/leds.h> - -#include <mach/hardware.h> -#include <mach/platform.h> - -#ifdef VERSATILE_SYS_BASE -#define LEDREG (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET) -#endif - -#ifdef REALVIEW_SYS_BASE -#define LEDREG (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET) -#endif +#include <linux/platform_device.h> struct versatile_led { + void __iomem *base; struct led_classdev cdev; u8 mask; }; @@ -50,30 +42,37 @@ static void versatile_led_set(struct led_classdev *cdev, { struct versatile_led *led = container_of(cdev, struct versatile_led, cdev); - u32 reg = readl(LEDREG); + u32 reg = readl(led->base); if (b != LED_OFF) reg |= led->mask; else reg &= ~led->mask; - writel(reg, LEDREG); + writel(reg, led->base); } static enum led_brightness versatile_led_get(struct led_classdev *cdev) { struct versatile_led *led = container_of(cdev, struct versatile_led, cdev); - u32 reg = readl(LEDREG); + u32 reg = readl(led->base); return (reg & led->mask) ? LED_FULL : LED_OFF; } -static int __init versatile_leds_init(void) +static int versatile_leds_probe(struct platform_device *dev) { int i; + struct resource *res; + void __iomem *base; - /* All ON */ - writel(0xff, LEDREG); + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + /* All off */ + writel(0, base); for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) { struct versatile_led *led; @@ -81,6 +80,7 @@ static int __init versatile_leds_init(void) if (!led) break; + led->base = base; led->cdev.name = versatile_leds[i].name; led->cdev.brightness_set = versatile_led_set; led->cdev.brightness_get = versatile_led_get; @@ -96,8 +96,15 @@ static int __init versatile_leds_init(void) return 0; } -/* - * Since we may have triggers on any subsystem, defer registration - * until after subsystem_init. - */ -fs_initcall(versatile_leds_init); +static struct platform_driver versatile_leds_driver = { + .driver = { + .name = "versatile-leds", + }, + .probe = versatile_leds_probe, +}; + +module_platform_driver(versatile_leds_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("ARM Versatile LED driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 33834120d05..f04ac62dd76 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1227,12 +1227,17 @@ config MCP_UCB1200_TS endmenu -config VEXPRESS_CONFIG - bool "ARM Versatile Express platform infrastructure" - depends on ARM || ARM64 +config MFD_VEXPRESS_SYSREG + bool "Versatile Express System Registers" + depends on VEXPRESS_CONFIG && GPIOLIB + default y + select CLKSRC_MMIO + select GPIO_GENERIC_PLATFORM + select MFD_CORE + select MFD_SYSCON help - Platform configuration infrastructure for the ARM Ltd. - Versatile Express. + System Registers are the platform configuration block + on the ARM Ltd. Versatile Express board. endmenu endif diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 2851275e265..cec3487b539 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -161,7 +161,7 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o obj-$(CONFIG_MFD_SYSCON) += syscon.o obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o -obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o +obj-$(CONFIG_MFD_VEXPRESS_SYSREG) += vexpress-sysreg.o obj-$(CONFIG_MFD_RETU) += retu-mfd.o obj-$(CONFIG_MFD_AS3711) += as3711.o obj-$(CONFIG_MFD_AS3722) += as3722.o diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index dbea55de439..e2a04bb8bc1 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -18,6 +18,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/platform_data/syscon.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> @@ -119,6 +120,7 @@ static struct regmap_config syscon_regmap_config = { static int syscon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct syscon_platform_data *pdata = dev_get_platdata(dev); struct syscon *syscon; struct resource *res; void __iomem *base; @@ -136,6 +138,8 @@ static int syscon_probe(struct platform_device *pdev) return -ENOMEM; syscon_regmap_config.max_register = res->end - res->start - 3; + if (pdata) + syscon_regmap_config.name = pdata->label; syscon->regmap = devm_regmap_init_mmio(dev, base, &syscon_regmap_config); if (IS_ERR(syscon->regmap)) { diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c deleted file mode 100644 index d0db89d13e0..00000000000 --- a/drivers/mfd/vexpress-config.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Copyright (C) 2012 ARM Limited - */ - -#define pr_fmt(fmt) "vexpress-config: " fmt - -#include <linux/bitops.h> -#include <linux/completion.h> -#include <linux/export.h> -#include <linux/list.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/vexpress.h> - - -#define VEXPRESS_CONFIG_MAX_BRIDGES 2 - -static struct vexpress_config_bridge { - struct device_node *node; - struct vexpress_config_bridge_info *info; - struct list_head transactions; - spinlock_t transactions_lock; -} vexpress_config_bridges[VEXPRESS_CONFIG_MAX_BRIDGES]; - -static DECLARE_BITMAP(vexpress_config_bridges_map, - ARRAY_SIZE(vexpress_config_bridges)); -static DEFINE_MUTEX(vexpress_config_bridges_mutex); - -struct vexpress_config_bridge *vexpress_config_bridge_register( - struct device_node *node, - struct vexpress_config_bridge_info *info) -{ - struct vexpress_config_bridge *bridge; - int i; - - pr_debug("Registering bridge '%s'\n", info->name); - - mutex_lock(&vexpress_config_bridges_mutex); - i = find_first_zero_bit(vexpress_config_bridges_map, - ARRAY_SIZE(vexpress_config_bridges)); - if (i >= ARRAY_SIZE(vexpress_config_bridges)) { - pr_err("Can't register more bridges!\n"); - mutex_unlock(&vexpress_config_bridges_mutex); - return NULL; - } - __set_bit(i, vexpress_config_bridges_map); - bridge = &vexpress_config_bridges[i]; - - bridge->node = node; - bridge->info = info; - INIT_LIST_HEAD(&bridge->transactions); - spin_lock_init(&bridge->transactions_lock); - - mutex_unlock(&vexpress_config_bridges_mutex); - - return bridge; -} -EXPORT_SYMBOL(vexpress_config_bridge_register); - -void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge) -{ - struct vexpress_config_bridge __bridge = *bridge; - int i; - - mutex_lock(&vexpress_config_bridges_mutex); - for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++) - if (&vexpress_config_bridges[i] == bridge) - __clear_bit(i, vexpress_config_bridges_map); - mutex_unlock(&vexpress_config_bridges_mutex); - - WARN_ON(!list_empty(&__bridge.transactions)); - while (!list_empty(&__bridge.transactions)) - cpu_relax(); -} -EXPORT_SYMBOL(vexpress_config_bridge_unregister); - - -struct vexpress_config_func { - struct vexpress_config_bridge *bridge; - void *func; -}; - -struct vexpress_config_func *__vexpress_config_func_get(struct device *dev, - struct device_node *node) -{ - struct device_node *bridge_node; - struct vexpress_config_func *func; - int i; - - if (WARN_ON(dev && node && dev->of_node != node)) - return NULL; - if (dev && !node) - node = dev->of_node; - - func = kzalloc(sizeof(*func), GFP_KERNEL); - if (!func) - return NULL; - - bridge_node = of_node_get(node); - while (bridge_node) { - const __be32 *prop = of_get_property(bridge_node, - "arm,vexpress,config-bridge", NULL); - - if (prop) { - bridge_node = of_find_node_by_phandle( - be32_to_cpup(prop)); - break; - } - - bridge_node = of_get_next_parent(bridge_node); - } - - mutex_lock(&vexpress_config_bridges_mutex); - for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++) { - struct vexpress_config_bridge *bridge = - &vexpress_config_bridges[i]; - - if (test_bit(i, vexpress_config_bridges_map) && - bridge->node == bridge_node) { - func->bridge = bridge; - func->func = bridge->info->func_get(dev, node); - break; - } - } - mutex_unlock(&vexpress_config_bridges_mutex); - - if (!func->func) { - of_node_put(node); - kfree(func); - return NULL; - } - - return func; -} -EXPORT_SYMBOL(__vexpress_config_func_get); - -void vexpress_config_func_put(struct vexpress_config_func *func) -{ - func->bridge->info->func_put(func->func); - of_node_put(func->bridge->node); - kfree(func); -} -EXPORT_SYMBOL(vexpress_config_func_put); - -struct vexpress_config_trans { - struct vexpress_config_func *func; - int offset; - bool write; - u32 *data; - int status; - struct completion completion; - struct list_head list; -}; - -static void vexpress_config_dump_trans(const char *what, - struct vexpress_config_trans *trans) -{ - pr_debug("%s %s trans %p func 0x%p offset %d data 0x%x status %d\n", - what, trans->write ? "write" : "read", trans, - trans->func->func, trans->offset, - trans->data ? *trans->data : 0, trans->status); -} - -static int vexpress_config_schedule(struct vexpress_config_trans *trans) -{ - int status; - struct vexpress_config_bridge *bridge = trans->func->bridge; - unsigned long flags; - - init_completion(&trans->completion); - trans->status = -EFAULT; - - spin_lock_irqsave(&bridge->transactions_lock, flags); - - if (list_empty(&bridge->transactions)) { - vexpress_config_dump_trans("Executing", trans); - status = bridge->info->func_exec(trans->func->func, - trans->offset, trans->write, trans->data); - } else { - vexpress_config_dump_trans("Queuing", trans); - status = VEXPRESS_CONFIG_STATUS_WAIT; - } - - switch (status) { - case VEXPRESS_CONFIG_STATUS_DONE: - vexpress_config_dump_trans("Finished", trans); - trans->status = status; - break; - case VEXPRESS_CONFIG_STATUS_WAIT: - list_add_tail(&trans->list, &bridge->transactions); - break; - } - - spin_unlock_irqrestore(&bridge->transactions_lock, flags); - - return status; -} - -void vexpress_config_complete(struct vexpress_config_bridge *bridge, - int status) -{ - struct vexpress_config_trans *trans; - unsigned long flags; - const char *message = "Completed"; - - spin_lock_irqsave(&bridge->transactions_lock, flags); - - trans = list_first_entry(&bridge->transactions, - struct vexpress_config_trans, list); - trans->status = status; - - do { - vexpress_config_dump_trans(message, trans); - list_del(&trans->list); - complete(&trans->completion); - - if (list_empty(&bridge->transactions)) - break; - - trans = list_first_entry(&bridge->transactions, - struct vexpress_config_trans, list); - vexpress_config_dump_trans("Executing pending", trans); - trans->status = bridge->info->func_exec(trans->func->func, - trans->offset, trans->write, trans->data); - message = "Finished pending"; - } while (trans->status == VEXPRESS_CONFIG_STATUS_DONE); - - spin_unlock_irqrestore(&bridge->transactions_lock, flags); -} -EXPORT_SYMBOL(vexpress_config_complete); - -int vexpress_config_wait(struct vexpress_config_trans *trans) -{ - wait_for_completion(&trans->completion); - - return trans->status; -} -EXPORT_SYMBOL(vexpress_config_wait); - -int vexpress_config_read(struct vexpress_config_func *func, int offset, - u32 *data) -{ - struct vexpress_config_trans trans = { - .func = func, - .offset = offset, - .write = false, - .data = data, - .status = 0, - }; - int status = vexpress_config_schedule(&trans); - - if (status == VEXPRESS_CONFIG_STATUS_WAIT) - status = vexpress_config_wait(&trans); - - return status; -} -EXPORT_SYMBOL(vexpress_config_read); - -int vexpress_config_write(struct vexpress_config_func *func, int offset, - u32 data) -{ - struct vexpress_config_trans trans = { - .func = func, - .offset = offset, - .write = true, - .data = &data, - .status = 0, - }; - int status = vexpress_config_schedule(&trans); - - if (status == VEXPRESS_CONFIG_STATUS_WAIT) - status = vexpress_config_wait(&trans); - - return status; -} -EXPORT_SYMBOL(vexpress_config_write); diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index 35281e804e7..9e21e4fc959 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -11,23 +11,22 @@ * Copyright (C) 2012 ARM Limited */ +#include <linux/basic_mmio_gpio.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/io.h> -#include <linux/leds.h> +#include <linux/mfd/core.h> #include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_data/syscon.h> #include <linux/platform_device.h> -#include <linux/regulator/driver.h> #include <linux/slab.h> #include <linux/stat.h> -#include <linux/timer.h> #include <linux/vexpress.h> #define SYS_ID 0x000 #define SYS_SW 0x004 #define SYS_LED 0x008 #define SYS_100HZ 0x024 -#define SYS_FLAGS 0x030 #define SYS_FLAGSSET 0x030 #define SYS_FLAGSCLR 0x034 #define SYS_NVFLAGS 0x038 @@ -46,465 +45,209 @@ #define SYS_CFGSTAT 0x0a8 #define SYS_HBI_MASK 0xfff -#define SYS_ID_HBI_SHIFT 16 #define SYS_PROCIDx_HBI_SHIFT 0 -#define SYS_LED_LED(n) (1 << (n)) - #define SYS_MCI_CARDIN (1 << 0) #define SYS_MCI_WPROT (1 << 1) -#define SYS_FLASH_WPn (1 << 0) - #define SYS_MISC_MASTERSITE (1 << 14) -#define SYS_CFGCTRL_START (1 << 31) -#define SYS_CFGCTRL_WRITE (1 << 30) -#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26) -#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20) -#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16) -#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12) -#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0) - -#define SYS_CFGSTAT_ERR (1 << 1) -#define SYS_CFGSTAT_COMPLETE (1 << 0) - - -static void __iomem *vexpress_sysreg_base; -static struct device *vexpress_sysreg_dev; -static int vexpress_master_site; - -void vexpress_flags_set(u32 data) -{ - writel(~0, vexpress_sysreg_base + SYS_FLAGSCLR); - writel(data, vexpress_sysreg_base + SYS_FLAGSSET); -} +static void __iomem *__vexpress_sysreg_base; -u32 vexpress_get_procid(int site) +static void __iomem *vexpress_sysreg_base(void) { - if (site == VEXPRESS_SITE_MASTER) - site = vexpress_master_site; - - return readl(vexpress_sysreg_base + (site == VEXPRESS_SITE_DB1 ? - SYS_PROCID0 : SYS_PROCID1)); -} + if (!__vexpress_sysreg_base) { + struct device_node *node = of_find_compatible_node(NULL, NULL, + "arm,vexpress-sysreg"); -u32 vexpress_get_hbi(int site) -{ - u32 id; - - switch (site) { - case VEXPRESS_SITE_MB: - id = readl(vexpress_sysreg_base + SYS_ID); - return (id >> SYS_ID_HBI_SHIFT) & SYS_HBI_MASK; - case VEXPRESS_SITE_MASTER: - case VEXPRESS_SITE_DB1: - case VEXPRESS_SITE_DB2: - id = vexpress_get_procid(site); - return (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK; + __vexpress_sysreg_base = of_iomap(node, 0); } - return ~0; -} + WARN_ON(!__vexpress_sysreg_base); -void __iomem *vexpress_get_24mhz_clock_base(void) -{ - return vexpress_sysreg_base + SYS_24MHZ; + return __vexpress_sysreg_base; } -static void vexpress_sysreg_find_prop(struct device_node *node, - const char *name, u32 *val) +static int vexpress_sysreg_get_master(void) { - of_node_get(node); - while (node) { - if (of_property_read_u32(node, name, val) == 0) { - of_node_put(node); - return; - } - node = of_get_next_parent(node); - } -} - -unsigned __vexpress_get_site(struct device *dev, struct device_node *node) -{ - u32 site = 0; - - WARN_ON(dev && node && dev->of_node != node); - if (dev && !node) - node = dev->of_node; - - if (node) { - vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site); - } else if (dev && dev->bus == &platform_bus_type) { - struct platform_device *pdev = to_platform_device(dev); - - if (pdev->num_resources == 1 && - pdev->resource[0].flags == IORESOURCE_BUS) - site = pdev->resource[0].start; - } else if (dev && strncmp(dev_name(dev), "ct:", 3) == 0) { - site = VEXPRESS_SITE_MASTER; - } + if (readl(vexpress_sysreg_base() + SYS_MISC) & SYS_MISC_MASTERSITE) + return VEXPRESS_SITE_DB2; - if (site == VEXPRESS_SITE_MASTER) - site = vexpress_master_site; - - return site; + return VEXPRESS_SITE_DB1; } - -struct vexpress_sysreg_config_func { - u32 template; - u32 device; -}; - -static struct vexpress_config_bridge *vexpress_sysreg_config_bridge; -static struct timer_list vexpress_sysreg_config_timer; -static u32 *vexpress_sysreg_config_data; -static int vexpress_sysreg_config_tries; - -static void *vexpress_sysreg_config_func_get(struct device *dev, - struct device_node *node) +void vexpress_flags_set(u32 data) { - struct vexpress_sysreg_config_func *config_func; - u32 site = 0; - u32 position = 0; - u32 dcc = 0; - u32 func_device[2]; - int err = -EFAULT; - - if (node) { - of_node_get(node); - vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site); - vexpress_sysreg_find_prop(node, "arm,vexpress,position", - &position); - vexpress_sysreg_find_prop(node, "arm,vexpress,dcc", &dcc); - err = of_property_read_u32_array(node, - "arm,vexpress-sysreg,func", func_device, - ARRAY_SIZE(func_device)); - of_node_put(node); - } else if (dev && dev->bus == &platform_bus_type) { - struct platform_device *pdev = to_platform_device(dev); - - if (pdev->num_resources == 1 && - pdev->resource[0].flags == IORESOURCE_BUS) { - site = pdev->resource[0].start; - func_device[0] = pdev->resource[0].end; - func_device[1] = pdev->id; - err = 0; - } - } - if (err) - return NULL; - - config_func = kzalloc(sizeof(*config_func), GFP_KERNEL); - if (!config_func) - return NULL; - - config_func->template = SYS_CFGCTRL_DCC(dcc); - config_func->template |= SYS_CFGCTRL_FUNC(func_device[0]); - config_func->template |= SYS_CFGCTRL_SITE(site == VEXPRESS_SITE_MASTER ? - vexpress_master_site : site); - config_func->template |= SYS_CFGCTRL_POSITION(position); - config_func->device |= func_device[1]; - - dev_dbg(vexpress_sysreg_dev, "func 0x%p = 0x%x, %d\n", config_func, - config_func->template, config_func->device); - - return config_func; + writel(~0, vexpress_sysreg_base() + SYS_FLAGSCLR); + writel(data, vexpress_sysreg_base() + SYS_FLAGSSET); } -static void vexpress_sysreg_config_func_put(void *func) +unsigned int vexpress_get_mci_cardin(struct device *dev) { - kfree(func); + return readl(vexpress_sysreg_base() + SYS_MCI) & SYS_MCI_CARDIN; } -static int vexpress_sysreg_config_func_exec(void *func, int offset, - bool write, u32 *data) +u32 vexpress_get_procid(int site) { - int status; - struct vexpress_sysreg_config_func *config_func = func; - u32 command; - - if (WARN_ON(!vexpress_sysreg_base)) - return -ENOENT; - - command = readl(vexpress_sysreg_base + SYS_CFGCTRL); - if (WARN_ON(command & SYS_CFGCTRL_START)) - return -EBUSY; - - command = SYS_CFGCTRL_START; - command |= write ? SYS_CFGCTRL_WRITE : 0; - command |= config_func->template; - command |= SYS_CFGCTRL_DEVICE(config_func->device + offset); - - /* Use a canary for reads */ - if (!write) - *data = 0xdeadbeef; - - dev_dbg(vexpress_sysreg_dev, "command %x, data %x\n", - command, *data); - writel(*data, vexpress_sysreg_base + SYS_CFGDATA); - writel(0, vexpress_sysreg_base + SYS_CFGSTAT); - writel(command, vexpress_sysreg_base + SYS_CFGCTRL); - mb(); - - if (vexpress_sysreg_dev) { - /* Schedule completion check */ - if (!write) - vexpress_sysreg_config_data = data; - vexpress_sysreg_config_tries = 100; - mod_timer(&vexpress_sysreg_config_timer, - jiffies + usecs_to_jiffies(100)); - status = VEXPRESS_CONFIG_STATUS_WAIT; - } else { - /* Early execution, no timer available, have to spin */ - u32 cfgstat; - - do { - cpu_relax(); - cfgstat = readl(vexpress_sysreg_base + SYS_CFGSTAT); - } while (!cfgstat); - - if (!write && (cfgstat & SYS_CFGSTAT_COMPLETE)) - *data = readl(vexpress_sysreg_base + SYS_CFGDATA); - status = VEXPRESS_CONFIG_STATUS_DONE; - - if (cfgstat & SYS_CFGSTAT_ERR) - status = -EINVAL; - } + if (site == VEXPRESS_SITE_MASTER) + site = vexpress_sysreg_get_master(); - return status; + return readl(vexpress_sysreg_base() + (site == VEXPRESS_SITE_DB1 ? + SYS_PROCID0 : SYS_PROCID1)); } -struct vexpress_config_bridge_info vexpress_sysreg_config_bridge_info = { - .name = "vexpress-sysreg", - .func_get = vexpress_sysreg_config_func_get, - .func_put = vexpress_sysreg_config_func_put, - .func_exec = vexpress_sysreg_config_func_exec, -}; - -static void vexpress_sysreg_config_complete(unsigned long data) +void __iomem *vexpress_get_24mhz_clock_base(void) { - int status = VEXPRESS_CONFIG_STATUS_DONE; - u32 cfgstat = readl(vexpress_sysreg_base + SYS_CFGSTAT); - - if (cfgstat & SYS_CFGSTAT_ERR) - status = -EINVAL; - if (!vexpress_sysreg_config_tries--) - status = -ETIMEDOUT; - - if (status < 0) { - dev_err(vexpress_sysreg_dev, "error %d\n", status); - } else if (!(cfgstat & SYS_CFGSTAT_COMPLETE)) { - mod_timer(&vexpress_sysreg_config_timer, - jiffies + usecs_to_jiffies(50)); - return; - } - - if (vexpress_sysreg_config_data) { - *vexpress_sysreg_config_data = readl(vexpress_sysreg_base + - SYS_CFGDATA); - dev_dbg(vexpress_sysreg_dev, "read data %x\n", - *vexpress_sysreg_config_data); - vexpress_sysreg_config_data = NULL; - } - - vexpress_config_complete(vexpress_sysreg_config_bridge, status); + return vexpress_sysreg_base() + SYS_24MHZ; } -void vexpress_sysreg_setup(struct device_node *node) -{ - if (WARN_ON(!vexpress_sysreg_base)) - return; - - if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE) - vexpress_master_site = VEXPRESS_SITE_DB2; - else - vexpress_master_site = VEXPRESS_SITE_DB1; - - vexpress_sysreg_config_bridge = vexpress_config_bridge_register( - node, &vexpress_sysreg_config_bridge_info); - WARN_ON(!vexpress_sysreg_config_bridge); -} - void __init vexpress_sysreg_early_init(void __iomem *base) { - vexpress_sysreg_base = base; - vexpress_sysreg_setup(NULL); -} - -void __init vexpress_sysreg_of_early_init(void) -{ - struct device_node *node; - - if (vexpress_sysreg_base) - return; + __vexpress_sysreg_base = base; - node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg"); - if (node) { - vexpress_sysreg_base = of_iomap(node, 0); - vexpress_sysreg_setup(node); - } + vexpress_config_set_master(vexpress_sysreg_get_master()); } -#ifdef CONFIG_GPIOLIB - -#define VEXPRESS_SYSREG_GPIO(_name, _reg, _value) \ - [VEXPRESS_GPIO_##_name] = { \ - .reg = _reg, \ - .value = _reg##_##_value, \ - } +/* The sysreg block is just a random collection of various functions... */ -static struct vexpress_sysreg_gpio { - unsigned long reg; - u32 value; -} vexpress_sysreg_gpios[] = { - VEXPRESS_SYSREG_GPIO(MMC_CARDIN, SYS_MCI, CARDIN), - VEXPRESS_SYSREG_GPIO(MMC_WPROT, SYS_MCI, WPROT), - VEXPRESS_SYSREG_GPIO(FLASH_WPn, SYS_FLASH, WPn), - VEXPRESS_SYSREG_GPIO(LED0, SYS_LED, LED(0)), - VEXPRESS_SYSREG_GPIO(LED1, SYS_LED, LED(1)), - VEXPRESS_SYSREG_GPIO(LED2, SYS_LED, LED(2)), - VEXPRESS_SYSREG_GPIO(LED3, SYS_LED, LED(3)), - VEXPRESS_SYSREG_GPIO(LED4, SYS_LED, LED(4)), - VEXPRESS_SYSREG_GPIO(LED5, SYS_LED, LED(5)), - VEXPRESS_SYSREG_GPIO(LED6, SYS_LED, LED(6)), - VEXPRESS_SYSREG_GPIO(LED7, SYS_LED, LED(7)), +static struct syscon_platform_data vexpress_sysreg_sys_id_pdata = { + .label = "sys_id", }; -static int vexpress_sysreg_gpio_direction_input(struct gpio_chip *chip, - unsigned offset) -{ - return 0; -} - -static int vexpress_sysreg_gpio_get(struct gpio_chip *chip, - unsigned offset) -{ - struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset]; - u32 reg_value = readl(vexpress_sysreg_base + gpio->reg); - - return !!(reg_value & gpio->value); -} - -static void vexpress_sysreg_gpio_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset]; - u32 reg_value = readl(vexpress_sysreg_base + gpio->reg); - - if (value) - reg_value |= gpio->value; - else - reg_value &= ~gpio->value; - - writel(reg_value, vexpress_sysreg_base + gpio->reg); -} - -static int vexpress_sysreg_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - vexpress_sysreg_gpio_set(chip, offset, value); - - return 0; -} - -static struct gpio_chip vexpress_sysreg_gpio_chip = { - .label = "vexpress-sysreg", - .direction_input = vexpress_sysreg_gpio_direction_input, - .direction_output = vexpress_sysreg_gpio_direction_output, - .get = vexpress_sysreg_gpio_get, - .set = vexpress_sysreg_gpio_set, - .ngpio = ARRAY_SIZE(vexpress_sysreg_gpios), - .base = 0, +static struct bgpio_pdata vexpress_sysreg_sys_led_pdata = { + .label = "sys_led", + .base = -1, + .ngpio = 8, }; - -#define VEXPRESS_SYSREG_GREEN_LED(_name, _default_trigger, _gpio) \ - { \ - .name = "v2m:green:"_name, \ - .default_trigger = _default_trigger, \ - .gpio = VEXPRESS_GPIO_##_gpio, \ - } - -struct gpio_led vexpress_sysreg_leds[] = { - VEXPRESS_SYSREG_GREEN_LED("user1", "heartbeat", LED0), - VEXPRESS_SYSREG_GREEN_LED("user2", "mmc0", LED1), - VEXPRESS_SYSREG_GREEN_LED("user3", "cpu0", LED2), - VEXPRESS_SYSREG_GREEN_LED("user4", "cpu1", LED3), - VEXPRESS_SYSREG_GREEN_LED("user5", "cpu2", LED4), - VEXPRESS_SYSREG_GREEN_LED("user6", "cpu3", LED5), - VEXPRESS_SYSREG_GREEN_LED("user7", "cpu4", LED6), - VEXPRESS_SYSREG_GREEN_LED("user8", "cpu5", LED7), +static struct bgpio_pdata vexpress_sysreg_sys_mci_pdata = { + .label = "sys_mci", + .base = -1, + .ngpio = 2, }; -struct gpio_led_platform_data vexpress_sysreg_leds_pdata = { - .num_leds = ARRAY_SIZE(vexpress_sysreg_leds), - .leds = vexpress_sysreg_leds, +static struct bgpio_pdata vexpress_sysreg_sys_flash_pdata = { + .label = "sys_flash", + .base = -1, + .ngpio = 1, }; -#endif - +static struct syscon_platform_data vexpress_sysreg_sys_misc_pdata = { + .label = "sys_misc", +}; -static ssize_t vexpress_sysreg_sys_id_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "0x%08x\n", readl(vexpress_sysreg_base + SYS_ID)); -} +static struct syscon_platform_data vexpress_sysreg_sys_procid_pdata = { + .label = "sys_procid", +}; -DEVICE_ATTR(sys_id, S_IRUGO, vexpress_sysreg_sys_id_show, NULL); +static struct mfd_cell vexpress_sysreg_cells[] = { + { + .name = "syscon", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM(SYS_ID, 0x4), + }, + .platform_data = &vexpress_sysreg_sys_id_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_id_pdata), + }, { + .name = "basic-mmio-gpio", + .of_compatible = "arm,vexpress-sysreg,sys_led", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM_NAMED(SYS_LED, 0x4, "dat"), + }, + .platform_data = &vexpress_sysreg_sys_led_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_led_pdata), + }, { + .name = "basic-mmio-gpio", + .of_compatible = "arm,vexpress-sysreg,sys_mci", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM_NAMED(SYS_MCI, 0x4, "dat"), + }, + .platform_data = &vexpress_sysreg_sys_mci_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_mci_pdata), + }, { + .name = "basic-mmio-gpio", + .of_compatible = "arm,vexpress-sysreg,sys_flash", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM_NAMED(SYS_FLASH, 0x4, "dat"), + }, + .platform_data = &vexpress_sysreg_sys_flash_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_flash_pdata), + }, { + .name = "syscon", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM(SYS_MISC, 0x4), + }, + .platform_data = &vexpress_sysreg_sys_misc_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_misc_pdata), + }, { + .name = "syscon", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM(SYS_PROCID0, 0x8), + }, + .platform_data = &vexpress_sysreg_sys_procid_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_procid_pdata), + }, { + .name = "vexpress-syscfg", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM(SYS_CFGDATA, 0xc), + }, + } +}; static int vexpress_sysreg_probe(struct platform_device *pdev) { - int err; - struct resource *res = platform_get_resource(pdev, - IORESOURCE_MEM, 0); - - if (!devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), pdev->name)) { - dev_err(&pdev->dev, "Failed to request memory region!\n"); - return -EBUSY; - } + struct resource *mem; + void __iomem *base; + struct bgpio_chip *mmc_gpio_chip; + u32 dt_hbi; - if (!vexpress_sysreg_base) { - vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); - vexpress_sysreg_setup(pdev->dev.of_node); - } + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -EINVAL; - if (!vexpress_sysreg_base) { - dev_err(&pdev->dev, "Failed to obtain base address!\n"); - return -EFAULT; - } + base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem)); + if (!base) + return -ENOMEM; - setup_timer(&vexpress_sysreg_config_timer, - vexpress_sysreg_config_complete, 0); + vexpress_config_set_master(vexpress_sysreg_get_master()); - vexpress_sysreg_dev = &pdev->dev; + /* Confirm board type against DT property, if available */ + if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) { + u32 id = vexpress_get_procid(VEXPRESS_SITE_MASTER); + u32 hbi = (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK; -#ifdef CONFIG_GPIOLIB - vexpress_sysreg_gpio_chip.dev = &pdev->dev; - err = gpiochip_add(&vexpress_sysreg_gpio_chip); - if (err) { - vexpress_config_bridge_unregister( - vexpress_sysreg_config_bridge); - dev_err(&pdev->dev, "Failed to register GPIO chip! (%d)\n", - err); - return err; + if (WARN_ON(dt_hbi != hbi)) + dev_warn(&pdev->dev, "DT HBI (%x) is not matching hardware (%x)!\n", + dt_hbi, hbi); } - platform_device_register_data(vexpress_sysreg_dev, "leds-gpio", - PLATFORM_DEVID_AUTO, &vexpress_sysreg_leds_pdata, - sizeof(vexpress_sysreg_leds_pdata)); -#endif - - device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id); - - return 0; + /* + * Duplicated SYS_MCI pseudo-GPIO controller for compatibility with + * older trees using sysreg node for MMC control lines. + */ + mmc_gpio_chip = devm_kzalloc(&pdev->dev, sizeof(*mmc_gpio_chip), + GFP_KERNEL); + if (!mmc_gpio_chip) + return -ENOMEM; + bgpio_init(mmc_gpio_chip, &pdev->dev, 0x4, base + SYS_MCI, + NULL, NULL, NULL, NULL, 0); + mmc_gpio_chip->gc.ngpio = 2; + gpiochip_add(&mmc_gpio_chip->gc); + + return mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, + vexpress_sysreg_cells, + ARRAY_SIZE(vexpress_sysreg_cells), mem, 0, NULL); } static const struct of_device_id vexpress_sysreg_match[] = { @@ -522,7 +265,12 @@ static struct platform_driver vexpress_sysreg_driver = { static int __init vexpress_sysreg_init(void) { - vexpress_sysreg_of_early_init(); + struct device_node *node; + + /* Need the sysreg early, before any other device... */ + for_each_matching_node(node, vexpress_sysreg_match) + of_platform_device_create(node, NULL, NULL); + return platform_driver_register(&vexpress_sysreg_driver); } core_initcall(vexpress_sysreg_init); diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 8baff0effc7..d9663ef90ce 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -515,6 +515,15 @@ config SRAM the genalloc API. It is supposed to be used for small on-chip SRAM areas found on many SoCs. +config VEXPRESS_SYSCFG + bool "Versatile Express System Configuration driver" + depends on VEXPRESS_CONFIG + default y + help + ARM Ltd. Versatile Express uses specialised platform configuration + bus. System Configuration interface is one of the possible means + of generating transactions on this bus. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7eb4b69580c..d59ce1261b3 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -55,3 +55,4 @@ obj-$(CONFIG_SRAM) += sram.o obj-y += mic/ obj-$(CONFIG_GENWQE) += genwqe/ obj-$(CONFIG_ECHO) += echo/ +obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c new file mode 100644 index 00000000000..73068e50e56 --- /dev/null +++ b/drivers/misc/vexpress-syscfg.c @@ -0,0 +1,324 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2014 ARM Limited + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/syscore_ops.h> +#include <linux/vexpress.h> + + +#define SYS_CFGDATA 0x0 + +#define SYS_CFGCTRL 0x4 +#define SYS_CFGCTRL_START (1 << 31) +#define SYS_CFGCTRL_WRITE (1 << 30) +#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26) +#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20) +#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16) +#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12) +#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0) + +#define SYS_CFGSTAT 0x8 +#define SYS_CFGSTAT_ERR (1 << 1) +#define SYS_CFGSTAT_COMPLETE (1 << 0) + + +struct vexpress_syscfg { + struct device *dev; + void __iomem *base; + struct list_head funcs; +}; + +struct vexpress_syscfg_func { + struct list_head list; + struct vexpress_syscfg *syscfg; + struct regmap *regmap; + int num_templates; + u32 template[0]; /* Keep it last! */ +}; + + +static int vexpress_syscfg_exec(struct vexpress_syscfg_func *func, + int index, bool write, u32 *data) +{ + struct vexpress_syscfg *syscfg = func->syscfg; + u32 command, status; + int tries; + long timeout; + + if (WARN_ON(index > func->num_templates)) + return -EINVAL; + + command = readl(syscfg->base + SYS_CFGCTRL); + if (WARN_ON(command & SYS_CFGCTRL_START)) + return -EBUSY; + + command = func->template[index]; + command |= SYS_CFGCTRL_START; + command |= write ? SYS_CFGCTRL_WRITE : 0; + + /* Use a canary for reads */ + if (!write) + *data = 0xdeadbeef; + + dev_dbg(syscfg->dev, "func %p, command %x, data %x\n", + func, command, *data); + writel(*data, syscfg->base + SYS_CFGDATA); + writel(0, syscfg->base + SYS_CFGSTAT); + writel(command, syscfg->base + SYS_CFGCTRL); + mb(); + + /* The operation can take ages... Go to sleep, 100us initially */ + tries = 100; + timeout = 100; + do { + if (!irqs_disabled()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(usecs_to_jiffies(timeout)); + if (signal_pending(current)) + return -EINTR; + } else { + udelay(timeout); + } + + status = readl(syscfg->base + SYS_CFGSTAT); + if (status & SYS_CFGSTAT_ERR) + return -EFAULT; + + if (timeout > 20) + timeout -= 20; + } while (--tries && !(status & SYS_CFGSTAT_COMPLETE)); + if (WARN_ON_ONCE(!tries)) + return -ETIMEDOUT; + + if (!write) { + *data = readl(syscfg->base + SYS_CFGDATA); + dev_dbg(syscfg->dev, "func %p, read data %x\n", func, *data); + } + + return 0; +} + +static int vexpress_syscfg_read(void *context, unsigned int index, + unsigned int *val) +{ + struct vexpress_syscfg_func *func = context; + + return vexpress_syscfg_exec(func, index, false, val); +} + +static int vexpress_syscfg_write(void *context, unsigned int index, + unsigned int val) +{ + struct vexpress_syscfg_func *func = context; + + return vexpress_syscfg_exec(func, index, true, &val); +} + +struct regmap_config vexpress_syscfg_regmap_config = { + .lock = vexpress_config_lock, + .unlock = vexpress_config_unlock, + .reg_bits = 32, + .val_bits = 32, + .reg_read = vexpress_syscfg_read, + .reg_write = vexpress_syscfg_write, + .reg_format_endian = REGMAP_ENDIAN_LITTLE, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + + +static struct regmap *vexpress_syscfg_regmap_init(struct device *dev, + void *context) +{ + struct platform_device *pdev = to_platform_device(dev); + struct vexpress_syscfg *syscfg = context; + struct vexpress_syscfg_func *func; + struct property *prop; + const __be32 *val = NULL; + __be32 energy_quirk[4]; + int num; + u32 site, position, dcc; + int i; + + if (dev->of_node) { + int err = vexpress_config_get_topo(dev->of_node, &site, + &position, &dcc); + + if (err) + return ERR_PTR(err); + + prop = of_find_property(dev->of_node, + "arm,vexpress-sysreg,func", NULL); + if (!prop) + return ERR_PTR(-EINVAL); + + num = prop->length / sizeof(u32) / 2; + val = prop->value; + } else { + if (pdev->num_resources != 1 || + pdev->resource[0].flags != IORESOURCE_BUS) + return ERR_PTR(-EFAULT); + + site = pdev->resource[0].start; + if (site == VEXPRESS_SITE_MASTER) + site = vexpress_config_get_master(); + position = 0; + dcc = 0; + num = 1; + } + + /* + * "arm,vexpress-energy" function used to be described + * by its first device only, now it requires both + */ + if (num == 1 && of_device_is_compatible(dev->of_node, + "arm,vexpress-energy")) { + num = 2; + energy_quirk[0] = *val; + energy_quirk[2] = *val++; + energy_quirk[1] = *val; + energy_quirk[3] = cpu_to_be32(be32_to_cpup(val) + 1); + val = energy_quirk; + } + + func = kzalloc(sizeof(*func) + sizeof(*func->template) * num, + GFP_KERNEL); + if (!func) + return NULL; + + func->syscfg = syscfg; + func->num_templates = num; + + for (i = 0; i < num; i++) { + u32 function, device; + + if (dev->of_node) { + function = be32_to_cpup(val++); + device = be32_to_cpup(val++); + } else { + function = pdev->resource[0].end; + device = pdev->id; + } + + dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n", + func, site, position, dcc, + function, device); + + func->template[i] = SYS_CFGCTRL_DCC(dcc); + func->template[i] |= SYS_CFGCTRL_SITE(site); + func->template[i] |= SYS_CFGCTRL_POSITION(position); + func->template[i] |= SYS_CFGCTRL_FUNC(function); + func->template[i] |= SYS_CFGCTRL_DEVICE(device); + } + + vexpress_syscfg_regmap_config.max_register = num - 1; + + func->regmap = regmap_init(dev, NULL, func, + &vexpress_syscfg_regmap_config); + + if (IS_ERR(func->regmap)) + kfree(func); + else + list_add(&func->list, &syscfg->funcs); + + return func->regmap; +} + +static void vexpress_syscfg_regmap_exit(struct regmap *regmap, void *context) +{ + struct vexpress_syscfg *syscfg = context; + struct vexpress_syscfg_func *func, *tmp; + + regmap_exit(regmap); + + list_for_each_entry_safe(func, tmp, &syscfg->funcs, list) { + if (func->regmap == regmap) { + list_del(&syscfg->funcs); + kfree(func); + break; + } + } +} + +static struct vexpress_config_bridge_ops vexpress_syscfg_bridge_ops = { + .regmap_init = vexpress_syscfg_regmap_init, + .regmap_exit = vexpress_syscfg_regmap_exit, +}; + + +/* Non-DT hack, to be gone... */ +static struct device *vexpress_syscfg_bridge; + +int vexpress_syscfg_device_register(struct platform_device *pdev) +{ + pdev->dev.parent = vexpress_syscfg_bridge; + + return platform_device_register(pdev); +} + + +int vexpress_syscfg_probe(struct platform_device *pdev) +{ + struct vexpress_syscfg *syscfg; + struct resource *res; + struct device *bridge; + + syscfg = devm_kzalloc(&pdev->dev, sizeof(*syscfg), GFP_KERNEL); + if (!syscfg) + return -ENOMEM; + syscfg->dev = &pdev->dev; + INIT_LIST_HEAD(&syscfg->funcs); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), pdev->name)) + return -EBUSY; + + syscfg->base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!syscfg->base) + return -EFAULT; + + /* Must use dev.parent (MFD), as that's where DT phandle points at... */ + bridge = vexpress_config_bridge_register(pdev->dev.parent, + &vexpress_syscfg_bridge_ops, syscfg); + if (IS_ERR(bridge)) + return PTR_ERR(bridge); + + /* Non-DT case */ + if (!pdev->dev.of_node) + vexpress_syscfg_bridge = bridge; + + return 0; +} + +static const struct platform_device_id vexpress_syscfg_id_table[] = { + { "vexpress-syscfg", }, + {}, +}; + +static struct platform_driver vexpress_syscfg_driver = { + .driver.name = "vexpress-syscfg", + .id_table = vexpress_syscfg_id_table, + .probe = vexpress_syscfg_probe, +}; + +static int __init vexpress_syscfg_init(void) +{ + return platform_driver_register(&vexpress_syscfg_driver); +} +core_initcall(vexpress_syscfg_init); diff --git a/drivers/of/platform.c b/drivers/of/platform.c index bd47fbc53dc..e8376d646d9 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -206,12 +206,13 @@ static struct platform_device *of_platform_device_create_pdata( { struct platform_device *dev; - if (!of_device_is_available(np)) + if (!of_device_is_available(np) || + of_node_test_and_set_flag(np, OF_POPULATED)) return NULL; dev = of_device_alloc(np, bus_id, parent); if (!dev) - return NULL; + goto err_clear_flag; #if defined(CONFIG_MICROBLAZE) dev->archdata.dma_mask = 0xffffffffUL; @@ -229,10 +230,14 @@ static struct platform_device *of_platform_device_create_pdata( if (of_device_add(dev) != 0) { platform_device_put(dev); - return NULL; + goto err_clear_flag; } return dev; + +err_clear_flag: + of_node_clear_flag(np, OF_POPULATED); + return NULL; } /** @@ -264,14 +269,15 @@ static struct amba_device *of_amba_device_create(struct device_node *node, pr_debug("Creating amba device %s\n", node->full_name); - if (!of_device_is_available(node)) + if (!of_device_is_available(node) || + of_node_test_and_set_flag(node, OF_POPULATED)) return NULL; dev = amba_device_alloc(NULL, 0, 0); if (!dev) { pr_err("%s(): amba_device_alloc() failed for %s\n", __func__, node->full_name); - return NULL; + goto err_clear_flag; } /* setup generic device info */ @@ -311,6 +317,8 @@ static struct amba_device *of_amba_device_create(struct device_node *node, err_free: amba_device_put(dev); +err_clear_flag: + of_node_clear_flag(node, OF_POPULATED); return NULL; } #else /* CONFIG_ARM_AMBA */ @@ -487,4 +495,60 @@ int of_platform_populate(struct device_node *root, return rc; } EXPORT_SYMBOL_GPL(of_platform_populate); + +static int of_platform_device_destroy(struct device *dev, void *data) +{ + bool *children_left = data; + + /* Do not touch devices not populated from the device tree */ + if (!dev->of_node || !of_node_check_flag(dev->of_node, OF_POPULATED)) { + *children_left = true; + return 0; + } + + /* Recurse, but don't touch this device if it has any children left */ + if (of_platform_depopulate(dev) != 0) { + *children_left = true; + return 0; + } + + if (dev->bus == &platform_bus_type) + platform_device_unregister(to_platform_device(dev)); +#ifdef CONFIG_ARM_AMBA + else if (dev->bus == &amba_bustype) + amba_device_unregister(to_amba_device(dev)); +#endif + else { + *children_left = true; + return 0; + } + + of_node_clear_flag(dev->of_node, OF_POPULATED); + + return 0; +} + +/** + * of_platform_depopulate() - Remove devices populated from device tree + * @parent: device which childred will be removed + * + * Complementary to of_platform_populate(), this function removes children + * of the given device (and, recurrently, their children) that have been + * created from their respective device tree nodes (and only those, + * leaving others - eg. manually created - unharmed). + * + * Returns 0 when all children devices have been removed or + * -EBUSY when some children remained. + */ +int of_platform_depopulate(struct device *parent) +{ + bool children_left = false; + + device_for_each_child(parent, &children_left, + of_platform_device_destroy); + + return children_left ? -EBUSY : 0; +} +EXPORT_SYMBOL_GPL(of_platform_depopulate); + #endif /* CONFIG_OF_ADDRESS */ diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c index b95cf71ed69..4dc102e2b23 100644 --- a/drivers/power/reset/vexpress-poweroff.c +++ b/drivers/power/reset/vexpress-poweroff.c @@ -23,10 +23,10 @@ static void vexpress_reset_do(struct device *dev, const char *what) { int err = -ENOENT; - struct vexpress_config_func *func = dev_get_drvdata(dev); + struct regmap *reg = dev_get_drvdata(dev); - if (func) { - err = vexpress_config_write(func, 0, 0); + if (reg) { + err = regmap_write(reg, 0, 0); if (!err) mdelay(1000); } @@ -91,17 +91,17 @@ static int vexpress_reset_probe(struct platform_device *pdev) enum vexpress_reset_func func; const struct of_device_id *match = of_match_device(vexpress_reset_of_match, &pdev->dev); - struct vexpress_config_func *config_func; + struct regmap *regmap; if (match) func = (enum vexpress_reset_func)match->data; else func = pdev->id_entry->driver_data; - config_func = vexpress_config_func_get_by_dev(&pdev->dev); - if (!config_func) - return -EINVAL; - dev_set_drvdata(&pdev->dev, config_func); + regmap = devm_regmap_init_vexpress_config(&pdev->dev); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + dev_set_drvdata(&pdev->dev, regmap); switch (func) { case FUNC_SHUTDOWN: diff --git a/drivers/regulator/vexpress.c b/drivers/regulator/vexpress.c index f3ae28a7e66..2863428813e 100644 --- a/drivers/regulator/vexpress.c +++ b/drivers/regulator/vexpress.c @@ -26,14 +26,14 @@ struct vexpress_regulator { struct regulator_desc desc; struct regulator_dev *regdev; - struct vexpress_config_func *func; + struct regmap *regmap; }; static int vexpress_regulator_get_voltage(struct regulator_dev *regdev) { struct vexpress_regulator *reg = rdev_get_drvdata(regdev); u32 uV; - int err = vexpress_config_read(reg->func, 0, &uV); + int err = regmap_read(reg->regmap, 0, &uV); return err ? err : uV; } @@ -43,7 +43,7 @@ static int vexpress_regulator_set_voltage(struct regulator_dev *regdev, { struct vexpress_regulator *reg = rdev_get_drvdata(regdev); - return vexpress_config_write(reg->func, 0, min_uV); + return regmap_write(reg->regmap, 0, min_uV); } static struct regulator_ops vexpress_regulator_ops_ro = { @@ -57,22 +57,17 @@ static struct regulator_ops vexpress_regulator_ops = { static int vexpress_regulator_probe(struct platform_device *pdev) { - int err; struct vexpress_regulator *reg; struct regulator_init_data *init_data; struct regulator_config config = { }; reg = devm_kzalloc(&pdev->dev, sizeof(*reg), GFP_KERNEL); - if (!reg) { - err = -ENOMEM; - goto error_kzalloc; - } + if (!reg) + return -ENOMEM; - reg->func = vexpress_config_func_get_by_dev(&pdev->dev); - if (!reg->func) { - err = -ENXIO; - goto error_get_func; - } + reg->regmap = devm_regmap_init_vexpress_config(&pdev->dev); + if (IS_ERR(reg->regmap)) + return PTR_ERR(reg->regmap); reg->desc.name = dev_name(&pdev->dev); reg->desc.type = REGULATOR_VOLTAGE; @@ -80,10 +75,8 @@ static int vexpress_regulator_probe(struct platform_device *pdev) reg->desc.continuous_voltage_range = true; init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node); - if (!init_data) { - err = -EINVAL; - goto error_get_regulator_init_data; - } + if (!init_data) + return -EINVAL; init_data->constraints.apply_uV = 0; if (init_data->constraints.min_uV && init_data->constraints.max_uV) @@ -97,30 +90,12 @@ static int vexpress_regulator_probe(struct platform_device *pdev) config.of_node = pdev->dev.of_node; reg->regdev = devm_regulator_register(&pdev->dev, ®->desc, &config); - if (IS_ERR(reg->regdev)) { - err = PTR_ERR(reg->regdev); - goto error_regulator_register; - } + if (IS_ERR(reg->regdev)) + return PTR_ERR(reg->regdev); platform_set_drvdata(pdev, reg); return 0; - -error_regulator_register: -error_get_regulator_init_data: - vexpress_config_func_put(reg->func); -error_get_func: -error_kzalloc: - return err; -} - -static int vexpress_regulator_remove(struct platform_device *pdev) -{ - struct vexpress_regulator *reg = platform_get_drvdata(pdev); - - vexpress_config_func_put(reg->func); - - return 0; } static struct of_device_id vexpress_regulator_of_match[] = { @@ -130,7 +105,6 @@ static struct of_device_id vexpress_regulator_of_match[] = { static struct platform_driver vexpress_regulator_driver = { .probe = vexpress_regulator_probe, - .remove = vexpress_regulator_remove, .driver = { .name = DRVNAME, .owner = THIS_MODULE, diff --git a/include/dt-bindings/clock/s3c2410.h b/include/dt-bindings/clock/s3c2410.h new file mode 100644 index 00000000000..352a7673fc6 --- /dev/null +++ b/include/dt-bindings/clock/s3c2410.h @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2410 and later. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ + +/* id 1 is reserved */ +#define MPLL 2 +#define UPLL 3 +#define FCLK 4 +#define HCLK 5 +#define PCLK 6 +#define UCLK 7 +#define ARMCLK 8 + +/* pclk-gates */ +#define PCLK_UART0 16 +#define PCLK_UART1 17 +#define PCLK_UART2 18 +#define PCLK_I2C 19 +#define PCLK_SDI 20 +#define PCLK_SPI 21 +#define PCLK_ADC 22 +#define PCLK_AC97 23 +#define PCLK_I2S 24 +#define PCLK_PWM 25 +#define PCLK_RTC 26 +#define PCLK_GPIO 27 + + +/* hclk-gates */ +#define HCLK_LCD 32 +#define HCLK_USBH 33 +#define HCLK_USBD 34 +#define HCLK_NAND 35 +#define HCLK_CAM 36 + + +#define CAMIF 40 + + +/* Total number of clocks. */ +#define NR_CLKS (CAMIF + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */ diff --git a/include/dt-bindings/clock/s3c2412.h b/include/dt-bindings/clock/s3c2412.h new file mode 100644 index 00000000000..aac1dcfda81 --- /dev/null +++ b/include/dt-bindings/clock/s3c2412.h @@ -0,0 +1,73 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2412. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ + +/* id 1 is reserved */ +#define MPLL 2 +#define UPLL 3 +#define MDIVCLK 4 +#define MSYSCLK 5 +#define USYSCLK 6 +#define HCLK 7 +#define PCLK 8 +#define ARMDIV 9 +#define ARMCLK 10 + + +/* Special clocks */ +#define SCLK_CAM 16 +#define SCLK_UART 17 +#define SCLK_I2S 18 +#define SCLK_USBD 19 +#define SCLK_USBH 20 + +/* pclk-gates */ +#define PCLK_WDT 32 +#define PCLK_SPI 33 +#define PCLK_I2S 34 +#define PCLK_I2C 35 +#define PCLK_ADC 36 +#define PCLK_RTC 37 +#define PCLK_GPIO 38 +#define PCLK_UART2 39 +#define PCLK_UART1 40 +#define PCLK_UART0 41 +#define PCLK_SDI 42 +#define PCLK_PWM 43 +#define PCLK_USBD 44 + +/* hclk-gates */ +#define HCLK_HALF 48 +#define HCLK_X2 49 +#define HCLK_SDRAM 50 +#define HCLK_USBH 51 +#define HCLK_LCD 52 +#define HCLK_NAND 53 +#define HCLK_DMA3 54 +#define HCLK_DMA2 55 +#define HCLK_DMA1 56 +#define HCLK_DMA0 57 + +/* Total number of clocks. */ +#define NR_CLKS (HCLK_DMA0 + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H */ diff --git a/include/dt-bindings/clock/s3c2443.h b/include/dt-bindings/clock/s3c2443.h new file mode 100644 index 00000000000..37e66b054d6 --- /dev/null +++ b/include/dt-bindings/clock/s3c2443.h @@ -0,0 +1,92 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2443 and later. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ +#define MSYSCLK 1 +#define ESYSCLK 2 +#define ARMDIV 3 +#define ARMCLK 4 +#define HCLK 5 +#define PCLK 6 + +/* Special clocks */ +#define SCLK_HSSPI0 16 +#define SCLK_FIMD 17 +#define SCLK_I2S0 18 +#define SCLK_I2S1 19 +#define SCLK_HSMMC1 20 +#define SCLK_HSMMC_EXT 21 +#define SCLK_CAM 22 +#define SCLK_UART 23 +#define SCLK_USBH 24 + +/* Muxes */ +#define MUX_HSSPI0 32 +#define MUX_HSSPI1 33 +#define MUX_HSMMC0 34 +#define MUX_HSMMC1 35 + +/* hclk-gates */ +#define HCLK_DMA0 48 +#define HCLK_DMA1 49 +#define HCLK_DMA2 50 +#define HCLK_DMA3 51 +#define HCLK_DMA4 52 +#define HCLK_DMA5 53 +#define HCLK_DMA6 54 +#define HCLK_DMA7 55 +#define HCLK_CAM 56 +#define HCLK_LCD 57 +#define HCLK_USBH 58 +#define HCLK_USBD 59 +#define HCLK_IROM 60 +#define HCLK_HSMMC0 61 +#define HCLK_HSMMC1 62 +#define HCLK_CFC 63 +#define HCLK_SSMC 64 +#define HCLK_DRAM 65 +#define HCLK_2D 66 + +/* pclk-gates */ +#define PCLK_UART0 72 +#define PCLK_UART1 73 +#define PCLK_UART2 74 +#define PCLK_UART3 75 +#define PCLK_I2C0 76 +#define PCLK_SDI 77 +#define PCLK_SPI0 78 +#define PCLK_ADC 79 +#define PCLK_AC97 80 +#define PCLK_I2S0 81 +#define PCLK_PWM 82 +#define PCLK_WDT 83 +#define PCLK_RTC 84 +#define PCLK_GPIO 85 +#define PCLK_SPI1 86 +#define PCLK_CHIPID 87 +#define PCLK_I2C1 88 +#define PCLK_I2S1 89 +#define PCLK_PCM 90 + +/* Total number of clocks. */ +#define NR_CLKS (PCLK_PCM + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */ diff --git a/include/linux/of.h b/include/linux/of.h index e6f0988c1c6..fa362867b45 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -130,6 +130,12 @@ static inline int of_node_check_flag(struct device_node *n, unsigned long flag) return test_bit(flag, &n->_flags); } +static inline int of_node_test_and_set_flag(struct device_node *n, + unsigned long flag) +{ + return test_and_set_bit(flag, &n->_flags); +} + static inline void of_node_set_flag(struct device_node *n, unsigned long flag) { set_bit(flag, &n->_flags); @@ -197,6 +203,7 @@ static inline unsigned long of_read_ulong(const __be32 *cell, int size) /* flag descriptions */ #define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */ #define OF_DETACHED 2 /* node has been detached from the device tree */ +#define OF_POPULATED 3 /* device already created for the node */ #define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags) #define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags) diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 05cb4a92825..b1010eeaac0 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -72,6 +72,7 @@ extern int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, struct device *parent); +extern int of_platform_depopulate(struct device *parent); #else static inline int of_platform_populate(struct device_node *root, const struct of_device_id *matches, @@ -80,6 +81,10 @@ static inline int of_platform_populate(struct device_node *root, { return -ENODEV; } +static inline int of_platform_depopulate(struct device *parent) +{ + return -ENODEV; +} #endif #endif /* _LINUX_OF_PLATFORM_H */ diff --git a/include/linux/platform_data/syscon.h b/include/linux/platform_data/syscon.h new file mode 100644 index 00000000000..2354c6fa372 --- /dev/null +++ b/include/linux/platform_data/syscon.h @@ -0,0 +1,8 @@ +#ifndef PLATFORM_DATA_SYSCON_H +#define PLATFORM_DATA_SYSCON_H + +struct syscon_platform_data { + const char *label; +}; + +#endif diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h index 617c01b8f74..a4c9547aae6 100644 --- a/include/linux/vexpress.h +++ b/include/linux/vexpress.h @@ -15,28 +15,15 @@ #define _LINUX_VEXPRESS_H #include <linux/device.h> +#include <linux/platform_device.h> #include <linux/reboot.h> +#include <linux/regmap.h> #define VEXPRESS_SITE_MB 0 #define VEXPRESS_SITE_DB1 1 #define VEXPRESS_SITE_DB2 2 #define VEXPRESS_SITE_MASTER 0xf -#define VEXPRESS_CONFIG_STATUS_DONE 0 -#define VEXPRESS_CONFIG_STATUS_WAIT 1 - -#define VEXPRESS_GPIO_MMC_CARDIN 0 -#define VEXPRESS_GPIO_MMC_WPROT 1 -#define VEXPRESS_GPIO_FLASH_WPn 2 -#define VEXPRESS_GPIO_LED0 3 -#define VEXPRESS_GPIO_LED1 4 -#define VEXPRESS_GPIO_LED2 5 -#define VEXPRESS_GPIO_LED3 6 -#define VEXPRESS_GPIO_LED4 7 -#define VEXPRESS_GPIO_LED5 8 -#define VEXPRESS_GPIO_LED6 9 -#define VEXPRESS_GPIO_LED7 10 - #define VEXPRESS_RES_FUNC(_site, _func) \ { \ .start = (_site), \ @@ -44,84 +31,43 @@ .flags = IORESOURCE_BUS, \ } -/* Config bridge API */ +/* Config infrastructure */ -/** - * struct vexpress_config_bridge_info - description of the platform - * configuration infrastructure bridge. - * - * @name: Bridge name - * - * @func_get: Obtains pointer to a configuration function for a given - * device or a Device Tree node, to be used with @func_put - * and @func_exec. The node pointer should take precedence - * over device pointer when both are passed. - * - * @func_put: Tells the bridge that the function will not be used any - * more, so all allocated resources can be released. - * - * @func_exec: Executes a configuration function read or write operation. - * The offset selects a 32 bit word of the value accessed. - * Must return VEXPRESS_CONFIG_STATUS_DONE when operation - * is finished immediately, VEXPRESS_CONFIG_STATUS_WAIT when - * will be completed in some time or negative value in case - * of error. - */ -struct vexpress_config_bridge_info { - const char *name; - void *(*func_get)(struct device *dev, struct device_node *node); - void (*func_put)(void *func); - int (*func_exec)(void *func, int offset, bool write, u32 *data); -}; +void vexpress_config_set_master(u32 site); +u32 vexpress_config_get_master(void); -struct vexpress_config_bridge; +void vexpress_config_lock(void *arg); +void vexpress_config_unlock(void *arg); -struct vexpress_config_bridge *vexpress_config_bridge_register( - struct device_node *node, - struct vexpress_config_bridge_info *info); -void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge); +int vexpress_config_get_topo(struct device_node *node, u32 *site, + u32 *position, u32 *dcc); -void vexpress_config_complete(struct vexpress_config_bridge *bridge, - int status); +/* Config bridge API */ -/* Config function API */ +struct vexpress_config_bridge_ops { + struct regmap * (*regmap_init)(struct device *dev, void *context); + void (*regmap_exit)(struct regmap *regmap, void *context); +}; -struct vexpress_config_func; +struct device *vexpress_config_bridge_register(struct device *parent, + struct vexpress_config_bridge_ops *ops, void *context); -struct vexpress_config_func *__vexpress_config_func_get(struct device *dev, - struct device_node *node); -#define vexpress_config_func_get_by_dev(dev) \ - __vexpress_config_func_get(dev, NULL) -#define vexpress_config_func_get_by_node(node) \ - __vexpress_config_func_get(NULL, node) -void vexpress_config_func_put(struct vexpress_config_func *func); +/* Config regmap API */ -/* Both may sleep! */ -int vexpress_config_read(struct vexpress_config_func *func, int offset, - u32 *data); -int vexpress_config_write(struct vexpress_config_func *func, int offset, - u32 data); +struct regmap *devm_regmap_init_vexpress_config(struct device *dev); /* Platform control */ +unsigned int vexpress_get_mci_cardin(struct device *dev); u32 vexpress_get_procid(int site); -u32 vexpress_get_hbi(int site); void *vexpress_get_24mhz_clock_base(void); void vexpress_flags_set(u32 data); -#define vexpress_get_site_by_node(node) __vexpress_get_site(NULL, node) -#define vexpress_get_site_by_dev(dev) __vexpress_get_site(dev, NULL) -unsigned __vexpress_get_site(struct device *dev, struct device_node *node); - void vexpress_sysreg_early_init(void __iomem *base); -void vexpress_sysreg_of_early_init(void); +int vexpress_syscfg_device_register(struct platform_device *pdev); /* Clocks */ -struct clk *vexpress_osc_setup(struct device *dev); -void vexpress_osc_of_setup(struct device_node *node); - void vexpress_clk_init(void __iomem *sp810_base); -void vexpress_clk_of_init(void); #endif |