summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/mips/AU1xxx_IDE.README168
-rw-r--r--arch/mips/Kconfig2
-rw-r--r--arch/mips/au1000/common/dbdma.c6
-rw-r--r--arch/mips/au1000/common/platform.c32
-rw-r--r--arch/mips/au1000/pb1200/irqmap.c6
-rw-r--r--drivers/ide/Kconfig31
-rw-r--r--drivers/ide/ide-proc.c1
-rw-r--r--drivers/ide/mips/au1xxx-ide.c1250
-rw-r--r--include/asm-mips/mach-au1x00/au1xxx.h44
-rw-r--r--include/asm-mips/mach-au1x00/au1xxx_dbdma.h4
-rw-r--r--include/asm-mips/mach-au1x00/au1xxx_ide.h301
-rw-r--r--include/linux/ide.h2
12 files changed, 1840 insertions, 7 deletions
diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
new file mode 100644
index 00000000000..a7e4c4ea356
--- /dev/null
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -0,0 +1,168 @@
+README for MIPS AU1XXX IDE driver - Released 2005-07-15
+
+ABOUT
+-----
+This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the
+services they provide.
+
+If you are short in patience and just want to know how to add your hard disc to
+the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
+section.
+
+
+LICENSE
+-------
+
+Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 2 of the License, or (at your option) any later
+version.
+
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+675 Mass Ave, Cambridge, MA 02139, USA.
+
+Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ Interface and Linux Device Driver" Application Note.
+
+
+FILES, CONFIGS AND COMPATABILITY
+--------------------------------
+
+Two files are introduced:
+
+ a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+ containes : struct _auide_hwif
+ struct drive_list_entry dma_white_list
+ struct drive_list_entry dma_black_list
+ timing parameters for PIO mode 0/1/2/3/4
+ timing parameters for MWDMA 0/1/2
+
+ b) 'drivers/ide/mips/au1xxx-ide.c'
+ contains the functionality of the AU1XXX IDE driver
+
+Four configs variables are introduced:
+
+ CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
+ CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
+ CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
+ controler
+ CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
+ per descriptor
+
+If MWDMA is enabled and the connected hard disc is not on the white list, the
+kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE
+performance is substantial slower then in full speed mwdma. In this case
+please add your hard disc to the white list (follow instruction from 'ADD NEW
+HARD DISC TO WHITE OR BLACK LIST' section).
+
+
+SUPPORTED IDE MODES
+-------------------
+
+The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
+MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
+
+To change the PIO mode use the program hdparm with option -p, e.g.
+'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option
+-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
+
+
+PERFORMANCE CONFIGURATIONS
+--------------------------
+
+If the used system doesn't need USB support enable the following kernel configs:
+
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDEDMA_AUTO=y
+
+If the used system need the USB support enable the following kernel configs for
+high IDE to USB throughput.
+
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDEDMA_AUTO=y
+
+
+ADD NEW HARD DISC TO WHITE OR BLACK LIST
+----------------------------------------
+
+Step 1 : detect the model name of your hard disc
+
+ a) connect your hard disc to the AU1XXX
+
+ b) boot your kernel and get the hard disc model.
+
+ Example boot log:
+
+ --snipped--
+ Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
+ ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
+ Au1xxx IDE(builtin) configured for MWDMA2
+ Probing IDE interface ide0...
+ hda: Maxtor 6E040L0, ATA DISK drive
+ ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64
+ hda: max request size: 64KiB
+ hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA
+ --snipped--
+
+ In this example 'Maxtor 6E040L0'.
+
+Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+
+ Add your hard disc to the dma_white_list or dma_black_list structur.
+
+Step 3 : Recompile the kernel
+
+ Enable MWDMA support in the kernel configuration. Recompile the kernel and
+ reboot.
+
+Step 4 : Tests
+
+ If you have add a hard disc to the white list, please run some stress tests
+ for verification.
+
+
+ACKNOWLEDGMENTS
+---------------
+
+These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
+IDE driver from AMD.
+
+Additional input also from:
+Matthias Lenk <matthias.lenk@amd.com>
+
+Happy hacking!
+Enrico Walther <enrico.walther@amd.com>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8746e1b1621..dc5c629af10 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -799,7 +799,7 @@ config MIPS_BOSPORUS
config MIPS_DB1200
bool "AMD Alchemy DB1200 board"
select SOC_AU1200
- select DMA_NONCOHERENT
+ select DMA_COHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 8f78c2fe7cf..eb5803aed91 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -197,6 +197,12 @@ find_dbdev_id (u32 id)
return NULL;
}
+void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+{
+ return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+}
+EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
+
u32
au1xxx_ddma_add_device(dbdev_tab_t *dev)
{
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 0c3fd726c3d..4aca18f0e29 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/resource.h>
-#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx.h>
/* OHCI (USB full speed host controller) */
static struct resource au1xxx_usb_ohci_resources[] = {
@@ -154,7 +154,6 @@ static struct platform_device au1xxx_usb_otg_device = {
.resource = au1xxx_usb_otg_resources,
};
-/*** AU1200 LCD controller ***/
static struct resource au1200_lcd_resources[] = {
[0] = {
.start = LCD_PHYS_ADDR,
@@ -168,6 +167,19 @@ static struct resource au1200_lcd_resources[] = {
}
};
+static struct resource au1200_ide0_resources[] = {
+ [0] = {
+ .start = AU1XXX_ATA_PHYS_ADDR,
+ .end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1XXX_ATA_INT,
+ .end = AU1XXX_ATA_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
static u64 au1200_lcd_dmamask = ~(u32)0;
static struct platform_device au1200_lcd_device = {
@@ -180,6 +192,21 @@ static struct platform_device au1200_lcd_device = {
.num_resources = ARRAY_SIZE(au1200_lcd_resources),
.resource = au1200_lcd_resources,
};
+
+
+static u64 ide0_dmamask = ~(u32)0;
+
+static struct platform_device au1200_ide0_device = {
+ .name = "au1200-ide",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ide0_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1200_ide0_resources),
+ .resource = au1200_ide0_resources,
+};
+
#endif
static struct platform_device *au1xxx_platform_devices[] __initdata = {
@@ -194,6 +221,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xxx_usb_gdt_device,
&au1xxx_usb_otg_device,
&au1200_lcd_device,
+ &au1200_ide0_device,
#endif
};
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
index 2ec64e78aa0..59e70e5cf32 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -22,6 +22,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/config.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/irq.h>
@@ -65,7 +66,7 @@ int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
*/
static volatile int pb1200_cascade_en=0;
-void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
{
unsigned short bisr = bcsr->int_status;
int extirq_nr = 0;
@@ -78,6 +79,7 @@ void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
/* Ack and dispatch IRQ */
do_IRQ(extirq_nr,regs);
}
+ return IRQ_RETVAL(1);
}
inline void pb1200_enable_irq(unsigned int irq_nr)
@@ -97,7 +99,7 @@ static unsigned int pb1200_startup_irq( unsigned int irq_nr )
if (++pb1200_cascade_en == 1)
{
request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
- 0, "Pb1200 Cascade", &pb1200_cascade_handler );
+ 0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler );
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev3. Enable a workaround */
if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1cadd2c3cad..a737886e39d 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -778,6 +778,35 @@ config BLK_DEV_IDE_PMAC_BLINK
This option enables the use of the sleep LED as a hard drive
activity LED.
+config BLK_DEV_IDE_AU1XXX
+ bool "IDE for AMD Alchemy Au1200"
+ depends on SOC_AU1200
+choice
+ prompt "IDE Mode for AMD Alchemy Au1200"
+ default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+
+config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
+
+config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
+ depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+endchoice
+
+config BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+ bool "Enable burstable Mode on DbDMA"
+ default false
+ depends BLK_DEV_IDE_AU1XXX
+ help
+ This option enable the burstable Flag on DbDMA controller
+ (cf. "AMD Alchemy 'Au1200' Processor Data Book - PRELIMINARY").
+
+config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
+ int "Maximum transfer size (KB) per request (up to 128)"
+ default "128"
+ depends BLK_DEV_IDE_AU1XXX
+
config IDE_ARM
def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
@@ -1013,7 +1042,7 @@ config BLK_DEV_UMC8672
endif
config BLK_DEV_IDEDMA
- def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS
+ def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
config IDEDMA_IVB
bool "IGNORE word93 Validation BITS"
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 4063d2c34e3..84665e2ba3c 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -64,6 +64,7 @@ static int proc_ide_read_imodel
case ide_cy82c693: name = "cy82c693"; break;
case ide_4drives: name = "4drives"; break;
case ide_pmac: name = "mac-io"; break;
+ case ide_au1xxx: name = "au1xxx"; break;
default: name = "(unknown)"; break;
}
len = sprintf(page, "%s\n", name);
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
new file mode 100644
index 00000000000..2b6327c576b
--- /dev/null
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -0,0 +1,1250 @@
+/*
+ * linux/drivers/ide/mips/au1xxx-ide.c version 01.30.00 Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ * Interface and Linux Device Driver" Application Note.
+ */
+#undef REALLY_SLOW_IO /* most systems can safely undef this */
+
+#include <linux/config.h> /* for CONFIG_BLK_DEV_IDEPCI */
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/hdreg.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <linux/sysdev.h>
+
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+
+#if CONFIG_PM
+#include <asm/mach-au1x00/au1xxx_pm.h>
+#endif
+
+#include <asm/mach-au1x00/au1xxx_ide.h>
+
+#define DRV_NAME "au1200-ide"
+#define DRV_VERSION "1.0"
+#define DRV_AUTHOR "AMD PCS / Pete Popov <ppopov@embeddedalley.com>"
+#define DRV_DESC "Au1200 IDE"
+
+static _auide_hwif auide_hwif;
+static spinlock_t ide_tune_drive_spin_lock = SPIN_LOCK_UNLOCKED;
+static spinlock_t ide_tune_chipset_spin_lock = SPIN_LOCK_UNLOCKED;
+static int dbdma_init_done = 0;
+
+/*
+ * local I/O functions
+ */
+u8 auide_inb(unsigned long port)
+{
+ return (au_readb(port));
+}
+
+u16 auide_inw(unsigned long port)
+{
+ return (au_readw(port));
+}
+
+u32 auide_inl(unsigned long port)
+{
+ return (au_readl(port));
+}
+
+void auide_insw(unsigned long port, void *addr, u32 count)
+{
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+
+ _auide_hwif *ahwif = &auide_hwif;
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+
+ if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1,
+ DDMA_FLAGS_NOIE)) {
+ printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
+ return;
+ }
+ ctp = *((chan_tab_t **)ahwif->rx_chan);
+ dp = ctp->cur_ptr;
+ while (dp->dscr_cmd0 & DSCR_CMD0_V)
+ ;
+ ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
+#else
+ while (count--)
+ {
+ *(u16 *)addr = au_readw(port);
+ addr +=2 ;
+ }
+#endif
+}
+
+void auide_insl(unsigned long port, void *addr, u32 count)
+{
+ while (count--)
+ {
+ *(u32 *)addr = au_readl(port);
+ /* NOTE: For IDE interfaces over PCMCIA,
+ * 32-bit access does not work
+ */
+ addr += 4;
+ }
+}
+
+void auide_outb(u8 addr, unsigned long port)
+{
+ return (au_writeb(addr, port));
+}
+
+void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port)
+{
+ return (au_writeb(addr, port));
+}
+
+void auide_outw(u16 addr, unsigned long port)
+{
+ return (au_writew(addr, port));
+}
+
+void auide_outl(u32 addr, unsigned long port)
+{
+ return (au_writel(addr, port));
+}
+
+void auide_outsw(unsigned long port, void *addr, u32 count)
+{
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+ _auide_hwif *ahwif = &auide_hwif;
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+
+ if(!put_source_flags(ahwif->tx_chan, (void*)addr,
+ count << 1, DDMA_FLAGS_NOIE)) {
+ printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
+ return;
+ }
+ ctp = *((chan_tab_t **)ahwif->tx_chan);
+ dp = ctp->cur_ptr;
+ while (dp->dscr_cmd0 & DSCR_CMD0_V)
+ ;
+ ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
+#else
+ while (count--)
+ {
+ au_writew(*(u16 *)addr, port);
+ addr += 2;
+ }
+#endif
+}
+
+void auide_outsl(unsigned long port, void *addr, u32 count)
+{
+ while (count--)
+ {
+ au_writel(*(u32 *)addr, port);
+ /* NOTE: For IDE interfaces over PCMCIA,
+ * 32-bit access does not work
+ */
+ addr += 4;
+ }
+}
+
+static void auide_tune_drive(ide_drive_t *drive, byte pio)
+{
+ int mem_sttime;
+ int mem_stcfg;
+ unsigned long flags;
+ u8 speed;
+
+ /* get the best pio mode for the drive */
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+
+ printk("%s: setting Au1XXX IDE to PIO mode%d\n",
+ drive->name, pio);
+
+ spin_lock_irqsave(&ide_tune_drive_spin_lock, flags);
+
+ mem_sttime = 0;
+ mem_stcfg = au_readl(MEM_STCFG2);
+
+ /* set pio mode! */
+ switch(pio) {
+ case 0:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO0_TWCS
+ | SBC_IDE_PIO0_TCSH
+ | SBC_IDE_PIO0_TCSOFF
+ | SBC_IDE_PIO0_TWP
+ | SBC_IDE_PIO0_TCSW
+ | SBC_IDE_PIO0_TPM
+ | SBC_IDE_PIO0_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
+
+ au_writel(mem_sttime,MEM_STTIME2);
+ au_writel(mem_stcfg,MEM_STCFG2);
+ break;
+
+ case 1:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO1_TWCS
+ | SBC_IDE_PIO1_TCSH
+ | SBC_IDE_PIO1_TCSOFF
+ | SBC_IDE_PIO1_TWP
+ | SBC_IDE_PIO1_TCSW
+ | SBC_IDE_PIO1_TPM
+ | SBC_IDE_PIO1_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
+ break;
+
+ case 2:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO2_TWCS
+ | SBC_IDE_PIO2_TCSH
+ | SBC_IDE_PIO2_TCSOFF
+ | SBC_IDE_PIO2_TWP
+ | SBC_IDE_PIO2_TCSW
+ | SBC_IDE_PIO2_TPM
+ | SBC_IDE_PIO2_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
+ break;
+
+ case 3:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO3_TWCS
+ | SBC_IDE_PIO3_TCSH
+ | SBC_IDE_PIO3_TCSOFF
+ | SBC_IDE_PIO3_TWP
+ | SBC_IDE_PIO3_TCSW
+ | SBC_IDE_PIO3_TPM
+ | SBC_IDE_PIO3_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;
+
+ break;
+
+ case 4:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO4_TWCS
+ | SBC_IDE_PIO4_TCSH
+ | SBC_IDE_PIO4_TCSOFF
+ | SBC_IDE_PIO4_TWP
+ | SBC_IDE_PIO4_TCSW
+ | SBC_IDE_PIO4_TPM
+ | SBC_IDE_PIO4_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
+ break;
+ }
+
+ au_writel(mem_sttime,MEM_STTIME2);
+ au_writel(mem_stcfg,MEM_STCFG2);
+
+ spin_unlock_irqrestore(&ide_tune_drive_spin_lock, flags);
+
+ speed = pio + XFER_PIO_0;
+ ide_config_drive_speed(drive, speed);
+}
+
+static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
+{
+ u8 mode = 0;
+ int mem_sttime;
+ int mem_stcfg;
+ unsigned long flags;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ struct hd_driveid *id = drive->id;
+
+ /*
+ * Now see what the current drive is capable of,
+ * selecting UDMA only if the mate said it was ok.
+ */
+ if (id && (id->capability & 1) && drive->autodma &&
+ !__ide_dma_bad_drive(drive)) {
+ if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
+ if (id->dma_mword & 4)
+ mode = XFER_MW_DMA_2;
+ else if (id->dma_mword & 2)
+ mode = XFER_MW_DMA_1;
+ else if (id->dma_mword & 1)
+ mode = XFER_MW_DMA_0;
+ }
+ }
+#endif
+
+ spin_lock_irqsave(&ide_tune_chipset_spin_lock, flags);
+
+ mem_sttime = 0;
+ mem_stcfg = au_readl(MEM_STCFG2);
+
+ switch(speed) {
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ auide_tune_drive(drive, (speed - XFER_PIO_0));
+ break;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ case XFER_MW_DMA_2:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_MDMA2_TWCS
+ | SBC_IDE_MDMA2_TCSH
+ | SBC_IDE_MDMA2_TCSOFF
+ | SBC_IDE_MDMA2_TWP
+ | SBC_IDE_MDMA2_TCSW
+ | SBC_IDE_MDMA2_TPM
+ | SBC_IDE_MDMA2_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;
+
+ mode = XFER_MW_DMA_2;
+ break;
+ case XFER_MW_DMA_1:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_MDMA1_TWCS
+ | SBC_IDE_MDMA1_TCSH
+ | SBC_IDE_MDMA1_TCSOFF
+ | SBC_IDE_MDMA1_TWP
+ | SBC_IDE_MDMA1_TCSW
+ | SBC_IDE_MDMA1_TPM
+ | SBC_IDE_MDMA1_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;
+
+ mode = XFER_MW_DMA_1;
+ break;
+ case XFER_MW_DMA_0:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_MDMA0_TWCS
+ | SBC_IDE_MDMA0_TCSH
+ | SBC_IDE_MDMA0_TCSOFF
+ | SBC_IDE_MDMA0_TWP
+ | SBC_IDE_MDMA0_TCSW
+ | SBC_IDE_MDMA0_TPM
+ | SBC_IDE_MDMA0_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;
+
+ mode = XFER_MW_DMA_0;
+ break;
+#endif
+ default:
+ return 1;
+ }
+
+ /*
+ * Tell the drive to switch to the new mode; abort on failure.
+ */
+ if (!mode || ide_config_drive_speed(drive, mode))
+ {
+ return 1; /* failure */
+ }
+
+
+ au_writel(mem_sttime,MEM_STTIME2);
+ au_writel(mem_stcfg,MEM_STCFG2);
+
+ spin_unlock_irqrestore(&ide_tune_chipset_spin_lock, flags);
+
+ return 0;
+}
+
+/*
+ * Multi-Word DMA + DbDMA functions
+ */
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+
+static int in_drive_list(struct hd_driveid *id,
+ const struct drive_list_entry *drive_table)
+{
+ for ( ; drive_table->id_model ; drive_table++){
+ if ((!strcmp(drive_table->id_model, id->model)) &&
+ ((strstr(drive_table->id_firmware, id->fw_rev)) ||
+ (!strcmp(drive_table->id_firmware, "ALL")))
+ )
+ return 1;
+ }
+ return 0;
+}
+
+static int auide_build_sglist(ide_drive_t *drive, struct request *rq)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
+ struct scatterlist *sg = hwif->sg_table;
+
+ ide_map_sg(drive, rq);
+
+ if (rq_data_dir(rq) == READ)
+ hwif->sg_dma_direction = DMA_FROM_DEVICE;
+ else
+ hwif->sg_dma_direction = DMA_TO_DEVICE;
+
+ return dma_map_sg(ahwif->dev, sg, hwif->sg_nents,
+ hwif->sg_dma_direction);
+}
+
+static int auide_build_dmatable(ide_drive_t *drive)
+{
+ int i, iswrite, count = 0;
+ ide_hwif_t *hwif = HWIF(drive);
+
+ struct request *rq = HWGROUP(drive)->rq;
+
+ _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
+ struct scatterlist *sg;
+
+ iswrite = (rq_data_dir(rq) == WRITE);
+ /* Save for interrupt context */
+ ahwif->drive = drive;
+
+ /* Build sglist */
+ hwif->sg_nents = i = auide_build_sglist(drive, rq);
+
+ if (!i)
+ return 0;
+
+ /* fill the descriptors */
+ sg = hwif->sg_table;
+ while (i && sg_dma_len(sg)) {
+ u32 cur_addr;
+ u32 cur_len;
+
+ cur_addr = sg_dma_address(sg);
+ cur_len = sg_dma_len(sg);
+
+ while (cur_len) {
+ u32 flags = DDMA_FLAGS_NOIE;
+ unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
+
+ if (++count >= PRD_ENTRIES) {
+ printk(KERN_WARNING "%s: DMA table too small\n",
+ drive->name);
+ goto use_pio_instead;
+ }
+
+ /* Lets enable intr for the last descriptor only */
+ if (1==i)
+ flags = DDMA_FLAGS_IE;
+ else
+ flags = DDMA_FLAGS_NOIE;
+
+ if (iswrite) {
+ if(!put_source_flags(ahwif->tx_chan,
+ (void*)(page_address(sg->page)
+ + sg->offset),
+ tc, flags)) {
+ printk(KERN_ERR "%s failed %d\n",
+ __FUNCTION__, __LINE__);
+ }
+ } else
+ {
+ if(!put_dest_flags(ahwif->rx_chan,
+ (void*)(page_address(sg->page)
+ + sg->offset),
+ tc, flags)) {
+ printk(KERN_ERR "%s failed %d\n",
+ __FUNCTION__, __LINE__);
+ }
+ }
+
+ cur_addr += tc;
+ cur_len -= tc;
+ }
+ sg++;
+ i--;
+ }
+
+ if (count)
+ return 1;
+
+use_pio_instead:
+ dma_unmap_sg(ahwif->dev,
+ hwif->sg_table,
+ hwif->sg_nents,
+ hwif->sg_dma_direction);
+
+ return 0; /* revert to PIO for this request */
+}
+
+static int auide_dma_end(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
+
+ if (hwif->sg_nents) {
+ dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents,
+ hwif->sg_dma_direction);
+ hwif->sg_nents = 0;
+ }
+
+ return 0;
+}
+
+static void auide_dma_start(ide_drive_t *drive )
+{
+// printk("%s\n", __FUNCTION__);
+}
+
+ide_startstop_t auide_dma_intr(ide_drive_t *drive)
+{
+ //printk("%s\n", __FUNCTION__);
+
+ u8 stat = 0, dma_stat = 0;
+
+ dma_stat = HWIF(drive)->ide_dma_end(drive);
+ stat = HWIF(drive)->INB(IDE_STATUS_REG); /* get drive status */
+ if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
+ if (!dma_stat) {
+ struct request *rq = HWGROUP(drive)->rq;
+
+ ide_end_request(drive, 1, rq->nr_sectors);
+ return ide_stopped;
+ }
+ printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n",
+ drive->name, dma_stat);
+ }
+ return ide_error(drive, "dma_intr", stat);
+}
+
+static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command)
+{
+ //printk("%s\n", __FUNCTION__);
+
+ /* issue cmd to drive */
+ ide_execute_command(drive, command, &auide_dma_intr,
+ (2*WAIT_CMD), NULL);
+}
+
+static int auide_dma_setup(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ if (drive->media != ide_disk)
+ return 1;
+
+ if (!auide_build_dmatable(drive))
+ /* try PIO instead of DMA */
+ return 1;
+
+ drive->waiting_for_dma = 1;
+
+ return 0;
+}
+
+static int auide_dma_check(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ if( !dbdma_init_done ){
+ auide_hwif.white_list = in_drive_list(drive->id,
+ dma_white_list);
+ auide_hwif.black_list = in_drive_list(drive->id,
+ dma_black_list);
+ auide_hwif.drive = drive;
+ auide_ddma_init(&auide_hwif);
+ dbdma_init_done = 1;
+ }
+#endif
+
+ /* Is the drive in our DMA black list? */
+ if ( auide_hwif.black_list ) {
+ drive->using_dma = 0;
+ printk("%s found in dma_blacklist[]! Disabling DMA.\n",
+ drive->id->model);
+ }
+ else
+ drive->using_dma = 1;
+
+ return HWIF(drive)->ide_dma_host_on(drive);
+}
+
+static int auide_dma_test_irq(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ if (!drive->waiting_for_dma)
+ printk(KERN_WARNING "%s: ide_dma_test_irq \
+ called while not waiting\n", drive->name);
+
+ /* If dbdma didn't execute the STOP command yet, the
+ * active bit is still set
+ */
+ drive->waiting_for_dma++;
+ if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
+ printk(KERN_WARNING "%s: timeout waiting for ddma to \
+ complete\n", drive->name);
+ return 1;
+ }
+ udelay(10);
+ return 0;
+}
+
+static int auide_dma_host_on(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ return 0;
+}
+
+static int auide_dma_on(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ drive->using_dma = 1;
+ return auide_dma_host_on(drive);
+}
+
+
+static int auide_dma_host_off(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ return 0;
+}
+
+static int auide_dma_off_quietly(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ drive->using_dma = 0;
+ return auide_dma_host_off(drive);
+}
+
+static int auide_dma_lostirq(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ printk(KERN_ERR "%s: IRQ lost\n", drive->name);
+ return 0;
+}
+
+static void auide_ddma_tx_callback(int irq, void *param, struct pt_regs *regs)
+{
+// printk("%s\n", __FUNCTION__);
+
+ _auide_hwif *ahwif = (_auide_hwif*)param;
+ ahwif->drive->waiting_for_dma = 0;
+ return;
+}
+
+static void auide_ddma_rx_callback(int irq, void *param, struct pt_regs *regs)
+{
+// printk("%s\n", __FUNCTION__);
+
+ _auide_hwif *ahwif = (_auide_hwif*)param;
+ ahwif->drive->waiting_for_dma = 0;
+ return;
+}
+
+static int auide_dma_timeout(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
+
+ if (HWIF(drive)->ide_dma_test_irq(drive))
+ return 0;
+
+ return HWIF(drive)->ide_dma_end(drive);
+}
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
+
+
+static int auide_ddma_init( _auide_hwif *auide )
+{
+// printk("%s\n", __FUNCTION__);
+
+ dbdev_tab_t source_dev_tab;
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ dbdev_tab_t target_dev_tab;
+ ide_hwif_t *hwif = auide->hwif;
+ char warning_output [2][80];
+ int i;
+#endif
+
+ /* Add our custom device to DDMA device table */
+ /* Create our new device entries in the table */
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ source_dev_tab.dev_id = AU1XXX_ATA_DDMA_REQ;
+
+ if( auide->white_list || auide->black_list ){
+ source_dev_tab.dev_tsize = 8;
+ source_dev_tab.dev_devwidth = 32;
+ source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ source_dev_tab.dev_intlevel = 0;
+ source_dev_tab.dev_intpolarity = 0;
+
+ /* init device table for target - static bus controller - */
+ target_dev_tab.dev_id = DSCR_CMD0_ALWAYS;
+ target_dev_tab.dev_tsize = 8;
+ target_dev_tab.dev_devwidth = 32;
+ target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ target_dev_tab.dev_intlevel = 0;
+ target_dev_tab.dev_intpolarity = 0;
+ target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE;
+ }
+ else{
+ source_dev_tab.dev_tsize = 1;
+ source_dev_tab.dev_devwidth = 16;
+ source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ source_dev_tab.dev_intlevel = 0;
+ source_dev_tab.dev_intpolarity = 0;
+
+ /* init device table for target - static bus controller - */
+ target_dev_tab.dev_id = DSCR_CMD0_ALWAYS;
+ target_dev_tab.dev_tsize = 1;
+ target_dev_tab.dev_devwidth = 16;
+ target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ target_dev_tab.dev_intlevel = 0;
+ target_dev_tab.dev_intpolarity = 0;
+ target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE;
+
+ sprintf(&warning_output[0][0],
+ "%s is not on ide driver white list.",
+ auide_hwif.drive->id->model);
+ for ( i=strlen(&warning_output[0][0]) ; i<76; i++ ){
+ sprintf(&warning_output[0][i]," ");
+ }
+
+ sprintf(&warning_output[1][0],
+ "To add %s please read 'Documentation/mips/AU1xxx_IDE.README'.",
+ auide_hwif.drive->id->model);
+ for ( i=strlen(&warning_output[1][0]) ; i<76; i++ ){
+ sprintf(&warning_output[1][i]," ");
+ }
+
+ printk("\n****************************************");
+ printk("****************************************\n");
+ printk("* %s *\n",&warning_output[0][0]);
+ printk("* Switch to safe MWDMA Mode! ");
+ printk(" *\n");
+ printk("* %s *\n",&warning_output[1][0]);
+ printk("****************************************");
+ printk("****************************************\n\n");
+ }
+#else
+ source_dev_tab.dev_id = DSCR_CMD0_ALWAYS;
+ source_dev_tab.dev_tsize = 8;
+ source_dev_tab.dev_devwidth = 32;
+ source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ source_dev_tab.dev_intlevel = 0;
+ source_dev_tab.dev_intpolarity = 0;
+#endif
+
+#if CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+ /* set flags for tx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_OUT
+ | DEV_FLAGS_SYNC
+ | DEV_FLAGS_BURSTABLE;
+ auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+ /* set flags for rx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_IN
+ | DEV_FLAGS_SYNC
+ | DEV_FLAGS_BURSTABLE;
+ auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+#else
+ /* set flags for tx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_OUT | DEV_FLAGS_SYNC;
+ auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+ /* set flags for rx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_IN | DEV_FLAGS_SYNC;
+ auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+
+ auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);
+
+ /* Get a channel for TX */
+ auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
+ auide->tx_dev_id,
+ auide_ddma_tx_callback,
+ (void*)auide);
+ /* Get a channel for RX */
+ auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
+ auide->target_dev_id,
+ auide_ddma_rx_callback,
+ (void*)auide);
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+ /*
+ * Note: if call back is not enabled, update ctp->cur_ptr manually
+ */
+ auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
+ auide->tx_dev_id,
+ NULL,
+ (void*)auide);
+ auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
+ DSCR_CMD0_ALWAYS,
+ NULL,
+ (void*)auide);
+#endif
+ auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
+ NUM_DESCRIPTORS);
+ auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
+ NUM_DESCRIPTORS);
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ hwif->dmatable_cpu = dma_alloc_coherent(auide->dev,
+ PRD_ENTRIES * PRD_BYTES, /* 1 Page */
+ &hwif->dmatable_dma, GFP_KERNEL);
+
+ auide->sg_table = kmalloc(sizeof(struct scatterlist) * PRD_ENTRIES,
+ GFP_KERNEL|GFP_DMA);
+ if (auide->sg_table == NULL) {
+ return -ENOMEM;
+ }
+#endif
+ au1xxx_dbdma_start( auide->tx_chan );
+ au1xxx_dbdma_start( auide->rx_chan );
+ return 0;
+}
+
+static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
+{
+ int i;
+#define ide_ioreg_t unsigned long
+ ide_ioreg_t *ata_regs = hw->io_ports;
+
+ /* fixme */
+ for (i = 0; i < IDE_CONTROL_OFFSET; i++) {
+ *ata_regs++ = (ide_ioreg_t) ahwif->regbase
+ + (ide_ioreg_t)(i << AU1XXX_ATA_REG_OFFSET);
+ }
+
+ /* set the Alternative Status register */
+ *ata_regs = (ide_ioreg_t) ahwif->regbase
+ + (ide_ioreg_t)(14 << AU1XXX_ATA_REG_OFFSET);
+}
+
+static int au_ide_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ _auide_hwif *ahwif = &auide_hwif;
+ ide_hwif_t *hwif;
+ struct resource *res;
+ int ret = 0;
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ char *mode = "MWDMA2";
+#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+ char *mode = "PIO+DDMA(offload)";
+#endif
+
+ memset(&auide_hwif, 0, sizeof(_auide_hwif));
+ auide_hwif.dev = 0;
+
+ ahwif->dev = dev;
+ ahwif->irq = platform_get_irq(pdev, 0);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (res == NULL) {
+ pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (!request_mem_region (res->start, res->end-res->start, pdev->name)) {
+ pr_debug("%s: request_mem_region failed\n", DRV_NAME);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ahwif->regbase = (u32)ioremap(res->start, res->end-res->start);
+ if (ahwif->regbase == 0) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ hwif = &ide_hwifs[pdev->id];
+ hw_regs_t *hw = &hwif->hw;
+ hwif->irq = hw->irq = ahwif->irq;
+ hwif->chipset = ide_au1xxx;
+
+ auide_setup_ports(hw, ahwif);
+ memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
+ hwif->rqsize = CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ;
+ hwif->rqsize = ((hwif->rqsize > AU1XXX_ATA_RQSIZE)
+ || (hwif->rqsize < 32)) ? AU1XXX_ATA_RQSIZE : hwif->rqsize;
+#else /* if kernel config is not set */
+ hwif->rqsize = AU1XXX_ATA_RQSIZE;
+#endif
+
+ hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */
+ hwif->swdma_mask = 0x07;
+#else
+ hwif->mwdma_mask = 0x0;
+ hwif->swdma_mask = 0x0;
+#endif
+ //hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
+ hwif->noprobe = 0;
+ hwif->drives[0].unmask = 1;
+ hwif->drives[1].unmask = 1;
+
+ /* hold should be on in all cases */
+ hwif->hold = 1;
+ hwif->mmio = 2;
+
+ /* set up local I/O function entry points */
+ hwif->INB = auide_inb;
+ hwif->INW = auide_inw;
+ hwif->INL = auide_inl;
+ hwif->INSW = auide_insw;
+ hwif->INSL = auide_insl;
+ hwif->OUTB = auide_outb;
+ hwif->OUTBSYNC = auide_outbsync;
+ hwif->OUTW = auide_outw;
+ hwif->OUTL = auide_outl;
+ hwif->OUTSW = auide_outsw;
+ hwif->OUTSL = auide_outsl;
+
+ hwif->tuneproc = &auide_tune_drive;
+ hwif->speedproc = &auide_tune_chipset;
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ hwif->ide_dma_off_quietly = &auide_dma_off_quietly;
+ hwif->ide_dma_timeout = &auide_dma_timeout;
+
+ hwif->ide_dma_check = &auide_dma_check;
+ hwif->dma_exec_cmd = &auide_dma_exec_cmd;
+ hwif->dma_start = &auide_dma_start;
+ hwif->ide_dma_end = &auide_dma_end;
+ hwif->dma_setup = &auide_dma_setup;
+ hwif->ide_dma_test_irq = &auide_dma_test_irq;
+ hwif->ide_dma_host_off = &auide_dma_host_off;
+ hwif->ide_dma_host_on = &auide_dma_host_on;
+ hwif->ide_dma_lostirq = &auide_dma_lostirq;
+ hwif->ide_dma_on = &auide_dma_on;
+
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+ hwif->atapi_dma = 1;
+ hwif->drives[0].using_dma = 1;
+ hwif->drives[1].using_dma = 1;
+#else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
+ hwif->autodma = 0;
+ hwif->channel = 0;
+ hwif->hold = 1;
+ hwif->select_data = 0; /* no chipset-specific code */
+ hwif->config_data = 0; /* no chipset-specific code */
+
+ hwif->drives[0].autodma = 0;
+ hwif->drives[0].drive_data = 0; /* no drive data */
+ hwif->drives[0].using_dma = 0;
+ hwif->drives[0].waiting_for_dma = 0;
+ hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */
+ /* secondary hdd not supported */
+ hwif->drives[1].autodma = 0;
+
+ hwif->drives[1].drive_data = 0;
+ hwif->drives[1].using_dma = 0;
+ hwif->drives[1].waiting_for_dma = 0;
+ hwif->drives[1].autotune = 2; /* 1=autotune, 2=noautotune, 0=default */
+#endif
+ hwif->drives[0].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
+ hwif->drives[1].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
+
+ /*Register Driver with PM Framework*/
+#ifdef CONFIG_PM
+ auide_hwif.pm.lock = SPIN_LOCK_UNLOCKED;
+ auide_hwif.pm.stopped = 0;
+
+ auide_hwif.pm.dev = new_au1xxx_power_device( "ide",
+ &au1200ide_pm_callback,
+ NULL);
+ if ( auide_hwif.pm.dev == NULL )
+ printk(KERN_INFO "Unable to create a power management \
+ device entry for the au1200-IDE.\n");
+ else
+ printk(KERN_INFO "Power management device entry for the \
+ au1200-IDE loaded.\n");
+#endif
+
+ auide_hwif.hwif = hwif;
+ hwif->hwif_data = &auide_hwif;
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ auide_ddma_init(&auide_hwif);
+ dbdma_init_done = 1;
+#endif
+
+ probe_hwif_init(hwif);
+ dev_set_drvdata(dev, hwif);
+
+ printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
+
+out:
+ return ret;
+}
+
+static int au_ide_remove(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res;
+ ide_hwif_t *hwif = dev_get_drvdata(dev);
+ _auide_hwif *ahwif = &auide_hwif;
+
+ ide_unregister(hwif - ide_hwifs);
+
+ iounmap((void *)ahwif->regbase);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start);
+
+ return 0;
+}
+
+static struct device_driver au1200_ide_driver = {
+ .name = "au1200-ide",
+ .bus = &platform_bus_type,
+ .probe = au_ide_probe,
+ .remove = au_ide_remove,
+};
+
+static int __init au_ide_init(void)
+{
+ return driver_register(&au1200_ide_driver);
+}
+
+static void __init au_ide_exit(void)
+{
+ driver_unregister(&au1200_ide_driver);
+}
+
+#ifdef CONFIG_PM
+int au1200ide_pm_callback( au1xxx_power_dev_t *dev,\
+ au1xxx_request_t request, void *data) {
+
+ unsigned int d, err = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(auide_hwif.pm.lock, flags);
+
+ switch (request){
+ case AU1XXX_PM_SLEEP:
+ err = au1xxxide_pm_sleep(dev);
+ break;
+ case AU1XXX_PM_WAKEUP:
+ d = *((unsigned int*)data);
+ if ( d > 0 && d <= 99) {
+ err = au1xxxide_pm_standby(dev);
+ }
+ else {
+ err = au1xxxide_pm_resume(dev);
+ }
+ break;
+ case AU1XXX_PM_GETSTATUS:
+ err = au1xxxide_pm_getstatus(dev);
+ break;
+ case AU1XXX_PM_ACCESS:
+ err = au1xxxide_pm_access(dev);
+ break;
+ case AU1XXX_PM_IDLE:
+ err = au1xxxide_pm_idle(dev);
+ break;
+ case AU1XXX_PM_CLEANUP:
+ err = au1xxxide_pm_cleanup(dev);
+ break;
+ default:
+ err = -1;
+ break;
+ }
+
+ spin_unlock_irqrestore(auide_hwif.pm.lock, flags);
+
+ return err;
+}
+
+static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev ) {
+ return 0;
+}
+
+static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev ) {
+
+ int retval;
+ ide_hwif_t *hwif = auide_hwif.hwif;
+ struct request rq;
+ struct request_pm_state rqpm;
+ ide_task_t args;
+
+ if(auide_hwif.pm.stopped)
+ return -1;
+
+ /*
+ * wait until hard disc is ready
+ */
+ if ( wait_for_ready(&hwif->drives[0], 35000) ) {
+ printk("Wait for drive sleep timeout!\n");
+ retval = -1;
+ }
+
+ /*
+ * sequenz to tell the high level ide driver that pm is resuming
+ */
+ memset(&rq, 0, sizeof(rq));
+ memset(&rqpm, 0, sizeof(rqpm));
+ memset(&args, 0, sizeof(args));
+ rq.flags = REQ_PM_SUSPEND;
+ rq.special = &args;
+ rq.pm = &rqpm;
+ rqpm.pm_step = ide_pm_state_start_suspend;
+ rqpm.pm_state = PMSG_SUSPEND;
+
+ retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_wait);
+
+ if (wait_for_ready (&hwif->drives[0], 35000)) {
+ printk("Wait for drive sleep timeout!\n");
+ retval = -1;
+ }
+
+ /*
+ * stop dbdma channels
+ */
+ au1xxx_dbdma_reset(auide_hwif.tx_chan);
+ au1xxx_dbdma_reset(auide_hwif.rx_chan);
+
+ auide_hwif.pm.stopped = 1;
+
+ return retval;
+}
+
+static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev ) {
+
+ int retval;
+ ide_hwif_t *hwif = auide_hwif.hwif;
+ struct request rq;
+ struct request_pm_state rqpm;
+ ide_task_t args;
+
+ if(!auide_hwif.pm.stopped)
+ return -1;
+
+ /*
+ * start dbdma channels
+ */
+ au1xxx_dbdma_start(auide_hwif.tx_chan);
+ au1xxx_dbdma_start(auide_hwif.rx_chan);
+
+ /*
+ * wait until hard disc is ready
+ */
+ if (wait_for_ready ( &hwif->drives[0], 35000)) {
+ printk("Wait for drive wake up timeout!\n");
+ retval = -1;
+ }
+
+ /*
+ * sequenz to tell the high level ide driver that pm is resuming
+ */
+ memset(&rq, 0, sizeof(rq));
+ memset(&rqpm, 0, sizeof(rqpm));
+ memset(&args, 0, sizeof(args));
+ rq.flags = REQ_PM_RESUME;
+ rq.special = &args;
+ rq.pm = &rqpm;
+ rqpm.pm_step = ide_pm_state_start_resume;
+ rqpm.pm_state = PMSG_ON;
+
+ retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_head_wait);
+
+ /*
+ * wait for hard disc
+ */
+ if ( wait_for_ready(&hwif->drives[0], 35000) ) {
+ printk("Wait for drive wake up timeout!\n");
+ retval = -1;
+ }
+
+ auide_hwif.pm.stopped = 0;
+
+ return retval;
+}
+
+static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev ) {
+ return dev->cur_state;
+}
+
+static int au1xxxide_pm_access( au1xxx_power_dev_t *dev ) {
+ if (dev->cur_state != AWAKE_STATE)
+ return 0;
+ else
+ return -1;
+}
+
+static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev ) {
+ return 0;
+}
+
+static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev ) {
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("AU1200 IDE driver");
+
+module_init(au_ide_init);
+module_exit(au_ide_exit);
diff --git a/include/asm-mips/mach-au1x00/au1xxx.h b/include/asm-mips/mach-au1x00/au1xxx.h
new file mode 100644
index 00000000000..b7b46dd9b92
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1xxx.h
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _AU1XXX_H_
+#define _AU1XXX_H_
+
+#include <linux/config.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#include <asm/mach-db1x00/db1x00.h>
+
+#elif defined(CONFIG_MIPS_PB1550)
+#include <asm/mach-pb1x00/pb1550.h>
+
+#elif defined(CONFIG_MIPS_PB1200)
+#include <asm/mach-pb1x00/pb1200.h>
+
+#elif defined(CONFIG_MIPS_DB1200)
+#include <asm/mach-db1x00/db1200.h>
+
+#endif
+
+#endif /* _AU1XXX_H_ */
diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
index ddbd9f5a248..b327bcd3fee 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
@@ -368,6 +368,7 @@ void au1xxx_dbdma_dump(u32 chanid);
u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr );
u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
+void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
/*
Some compatibilty macros --
@@ -375,9 +376,12 @@ u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
*/
#define au1xxx_dbdma_put_source(chanid,buf,nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
#define au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+#define put_source_flags(chanid,buf,nbytes,flags) au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags)
+
#define au1xxx_dbdma_put_dest(chanid,buf,nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
#define au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+#define put_dest_flags(chanid,buf,nbytes,flags) au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags)
/*
* Flags for the put_source/put_dest functions.
diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h
new file mode 100644
index 00000000000..33d275c3b84
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h
@@ -0,0 +1,301 @@
+/*
+ * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ * Interface and Linux Device Driver" Application Note.
+ */
+#include <linux/config.h>
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ #define DMA_WAIT_TIMEOUT 100
+ #define NUM_DESCRIPTORS PRD_ENTRIES
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+ #define NUM_DESCRIPTORS 2
+#endif
+
+#ifndef AU1XXX_ATA_RQSIZE
+ #define AU1XXX_ATA_RQSIZE 128
+#endif
+
+/* Disable Burstable-Support for DBDMA */
+#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+ #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
+#endif
+
+#ifdef CONFIG_PM
+/*
+* This will enable the device to be powered up when write() or read()
+* is called. If this is not defined, the driver will return -EBUSY.
+*/
+#define WAKE_ON_ACCESS 1
+
+typedef struct
+{
+ spinlock_t lock; /* Used to block on state transitions */
+ au1xxx_power_dev_t *dev; /* Power Managers device structure */
+ unsigned stopped; /* USed to signaling device is stopped */
+} pm_state;
+#endif
+
+
+typedef struct
+{
+ u32 tx_dev_id, rx_dev_id, target_dev_id;
+ u32 tx_chan, rx_chan;
+ void *tx_desc_head, *rx_desc_head;
+ ide_hwif_t *hwif;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ ide_drive_t *drive;
+ u8 white_list, black_list;
+ struct dbdma_cmd *dma_table_cpu;
+ dma_addr_t dma_table_dma;
+ struct scatterlist *sg_table;
+ int sg_nents;
+ int sg_dma_direction;
+#endif
+ struct device *dev;
+ int irq;
+ u32 regbase;
+#ifdef CONFIG_PM
+ pm_state pm;
+#endif
+} _auide_hwif;
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+struct drive_list_entry {
+ const char * id_model;
+ const char * id_firmware;
+};
+
+/* HD white list */
+static const struct drive_list_entry dma_white_list [] = {
+/*
+ * Hitachi
+ */
+ { "HITACHI_DK14FA-20" , "ALL" },
+ { "HTS726060M9AT00" , "ALL" },
+/*
+ * Maxtor
+ */
+ { "Maxtor 6E040L0" , "ALL" },
+ { "Maxtor 6Y080P0" , "ALL" },
+ { "Maxtor 6Y160P0" , "ALL" },
+/*
+ * Seagate
+ */
+ { "ST3120026A" , "ALL" },
+ { "ST320014A" , "ALL" },
+ { "ST94011A" , "ALL" },
+ { "ST340016A" , "ALL" },
+/*
+ * Western Digital
+ */
+ { "WDC WD400UE-00HCT0" , "ALL" },
+ { "WDC WD400JB-00JJC0" , "ALL" },
+ { NULL , NULL }
+};
+
+/* HD black list */
+static const struct drive_list_entry dma_black_list [] = {
+/*
+ * Western Digital
+ */
+ { "WDC WD100EB-00CGH0" , "ALL" },
+ { "WDC WD200BB-00AUA1" , "ALL" },
+ { "WDC AC24300L" , "ALL" },
+ { NULL , NULL }
+};
+#endif
+
+/* function prototyping */
+u8 auide_inb(unsigned long port);
+u16 auide_inw(unsigned long port);
+u32 auide_inl(unsigned long port);
+void auide_insw(unsigned long port, void *addr, u32 count);
+void auide_insl(unsigned long port, void *addr, u32 count);
+void auide_outb(u8 addr, unsigned long port);
+void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port);
+void auide_outw(u16 addr, unsigned long port);
+void auide_outl(u32 addr, unsigned long port);
+void auide_outsw(unsigned long port, void *addr, u32 count);
+void auide_outsl(unsigned long port, void *addr, u32 count);
+static void auide_tune_drive(ide_drive_t *drive, byte pio);
+static int auide_tune_chipset (ide_drive_t *drive, u8 speed);
+static int auide_ddma_init( _auide_hwif *auide );
+static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif);
+int __init auide_probe(void);
+
+#ifdef CONFIG_PM
+ int au1200ide_pm_callback( au1xxx_power_dev_t *dev,
+ au1xxx_request_t request, void *data);
+ static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_access( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev );
+#endif
+
+
+/*
+ * Multi-Word DMA + DbDMA functions
+ */
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+
+ static int in_drive_list(struct hd_driveid *id,
+ const struct drive_list_entry *drive_table);
+ static int auide_build_sglist(ide_drive_t *drive, struct request *rq);
+ static int auide_build_dmatable(ide_drive_t *drive);
+ static int auide_dma_end(ide_drive_t *drive);
+ static void auide_dma_start(ide_drive_t *drive );
+ ide_startstop_t auide_dma_intr (ide_drive_t *drive);
+ static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command);
+ static int auide_dma_setup(ide_drive_t *drive);
+ static int auide_dma_check(ide_drive_t *drive);
+ static int auide_dma_test_irq(ide_drive_t *drive);
+ static int auide_dma_host_off(ide_drive_t *drive);
+ static int auide_dma_host_on(ide_drive_t *drive);
+ static int auide_dma_lostirq(ide_drive_t *drive);
+ static int auide_dma_on(ide_drive_t *drive);
+ static void auide_ddma_tx_callback(int irq, void *param,
+ struct pt_regs *regs);
+ static void auide_ddma_rx_callback(int irq, void *param,
+ struct pt_regs *regs);
+ static int auide_dma_off_quietly(ide_drive_t *drive);
+ static int auide_dma_timeout(ide_drive_t *drive);
+
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
+
+/*******************************************************************************
+* PIO Mode timing calculation : *
+* *
+* Static Bus Spec ATA Spec *
+* Tcsoe = t1 *
+* Toecs = t9 *
+* Twcs = t9 *
+* Tcsh = t2i | t2 *
+* Tcsoff = t2i | t2 *
+* Twp = t2 *
+* Tcsw = t1 *
+* Tpm = 0 *
+* Ta = t1+t2 *
+*******************************************************************************/
+
+#define TCSOE_MASK (0x07<<29)
+#define TOECS_MASK (0x07<<26)
+#define TWCS_MASK (0x07<<28)
+#define TCSH_MASK (0x0F<<24)
+#define TCSOFF_MASK (0x07<<20)
+#define TWP_MASK (0x3F<<14)
+#define TCSW_MASK (0x0F<<10)
+#define TPM_MASK (0x0F<<6)
+#define TA_MASK (0x3F<<0)
+#define TS_MASK (1<<8)
+
+/* Timing parameters PIO mode 0 */
+#define SBC_IDE_PIO0_TCSOE (0x04<<29)
+#define SBC_IDE_PIO0_TOECS (0x01<<26)
+#define SBC_IDE_PIO0_TWCS (0x02<<28)
+#define SBC_IDE_PIO0_TCSH (0x08<<24)
+#define SBC_IDE_PIO0_TCSOFF (0x07<<20)
+#define SBC_IDE_PIO0_TWP (0x10<<14)
+#define SBC_IDE_PIO0_TCSW (0x04<<10)
+#define SBC_IDE_PIO0_TPM (0x0<<6)
+#define SBC_IDE_PIO0_TA (0x15<<0)
+/* Timing parameters PIO mode 1 */
+#define SBC_IDE_PIO1_TCSOE (0x03<<29)
+#define SBC_IDE_PIO1_TOECS (0x01<<26)
+#define SBC_IDE_PIO1_TWCS (0x01<<28)
+#define SBC_IDE_PIO1_TCSH (0x06<<24)
+#define SBC_IDE_PIO1_TCSOFF (0x06<<20)
+#define SBC_IDE_PIO1_TWP (0x08<<14)
+#define SBC_IDE_PIO1_TCSW (0x03<<10)
+#define SBC_IDE_PIO1_TPM (0x00<<6)
+#define SBC_IDE_PIO1_TA (0x0B<<0)
+/* Timing parameters PIO mode 2 */
+#define SBC_IDE_PIO2_TCSOE (0x05<<29)
+#define SBC_IDE_PIO2_TOECS (0x01<<26)
+#define SBC_IDE_PIO2_TWCS (0x01<<28)
+#define SBC_IDE_PIO2_TCSH (0x07<<24)
+#define SBC_IDE_PIO2_TCSOFF (0x07<<20)
+#define SBC_IDE_PIO2_TWP (0x1F<<14)
+#define SBC_IDE_PIO2_TCSW (0x05<<10)
+#define SBC_IDE_PIO2_TPM (0x00<<6)
+#define SBC_IDE_PIO2_TA (0x22<<0)
+/* Timing parameters PIO mode 3 */
+#define SBC_IDE_PIO3_TCSOE (0x05<<29)
+#define SBC_IDE_PIO3_TOECS (0x01<<26)
+#define SBC_IDE_PIO3_TWCS (0x01<<28)
+#define SBC_IDE_PIO3_TCSH (0x0D<<24)
+#define SBC_IDE_PIO3_TCSOFF (0x0D<<20)
+#define SBC_IDE_PIO3_TWP (0x15<<14)
+#define SBC_IDE_PIO3_TCSW (0x05<<10)
+#define SBC_IDE_PIO3_TPM (0x00<<6)
+#define SBC_IDE_PIO3_TA (0x1A<<0)
+/* Timing parameters PIO mode 4 */
+#define SBC_IDE_PIO4_TCSOE (0x04<<29)
+#define SBC_IDE_PIO4_TOECS (0x01<<26)
+#define SBC_IDE_PIO4_TWCS (0x01<<28)
+#define SBC_IDE_PIO4_TCSH (0x04<<24)
+#define SBC_IDE_PIO4_TCSOFF (0x04<<20)
+#define SBC_IDE_PIO4_TWP (0x0D<<14)
+#define SBC_IDE_PIO4_TCSW (0x03<<10)
+#define SBC_IDE_PIO4_TPM (0x00<<6)
+#define SBC_IDE_PIO4_TA (0x12<<0)
+/* Timing parameters MDMA mode 0 */
+#define SBC_IDE_MDMA0_TCSOE (0x03<<29)
+#define SBC_IDE_MDMA0_TOECS (0x01<<26)
+#define SBC_IDE_MDMA0_TWCS (0x01<<28)
+#define SBC_IDE_MDMA0_TCSH (0x07<<24)
+#define SBC_IDE_MDMA0_TCSOFF (0x07<<20)
+#define SBC_IDE_MDMA0_TWP (0x0C<<14)
+#define SBC_IDE_MDMA0_TCSW (0x03<<10)
+#define SBC_IDE_MDMA0_TPM (0x00<<6)
+#define SBC_IDE_MDMA0_TA (0x0F<<0)
+/* Timing parameters MDMA mode 1 */
+#define SBC_IDE_MDMA1_TCSOE (0x05<<29)
+#define SBC_IDE_MDMA1_TOECS (0x01<<26)
+#define SBC_IDE_MDMA1_TWCS (0x01<<28)
+#define SBC_IDE_MDMA1_TCSH (0x05<<24)
+#define SBC_IDE_MDMA1_TCSOFF (0x05<<20)
+#define SBC_IDE_MDMA1_TWP (0x0F<<14)
+#define SBC_IDE_MDMA1_TCSW (0x05<<10)
+#define SBC_IDE_MDMA1_TPM (0x00<<6)
+#define SBC_IDE_MDMA1_TA (0x15<<0)
+/* Timing parameters MDMA mode 2 */
+#define SBC_IDE_MDMA2_TCSOE (0x04<<29)
+#define SBC_IDE_MDMA2_TOECS (0x01<<26)
+#define SBC_IDE_MDMA2_TWCS (0x01<<28)
+#define SBC_IDE_MDMA2_TCSH (0x04<<24)
+#define SBC_IDE_MDMA2_TCSOFF (0x04<<20)
+#define SBC_IDE_MDMA2_TWP (0x0D<<14)
+#define SBC_IDE_MDMA2_TCSW (0x04<<10)
+#define SBC_IDE_MDMA2_TPM (0x00<<6)
+#define SBC_IDE_MDMA2_TA (0x12<<0)
+
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a6dbb51ecd7..3461abc1e85 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -218,7 +218,7 @@ typedef enum { ide_unknown, ide_generic, ide_pci,
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
- ide_forced
+ ide_au1xxx, ide_forced
} hwif_chipset_t;
/*
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-24 23:53:54 +0000