diff options
-rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 29 | ||||
-rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 33 |
2 files changed, 14 insertions, 48 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index e5f25c5b9c3..134bef66a31 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -53,6 +53,9 @@ #define SDIO_FUNC1_BLOCKSIZE 64 #define SDIO_FUNC2_BLOCKSIZE 512 +/* Maximum milliseconds to wait for F2 to come up */ +#define SDIO_WAIT_F2RDY 3000 + static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id) { @@ -205,27 +208,8 @@ static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev, * Handle F2 enable/disable and Abort command * as a special case. */ - if (regaddr == SDIO_CCCR_IOEx) { - sdfunc = sdiodev->func[2]; - if (sdfunc) { - if (*byte & SDIO_FUNC_ENABLE_2) { - /* Enable Function 2 */ - err_ret = sdio_enable_func(sdfunc); - if (err_ret) - brcmf_err("enable F2 failed:%d\n", - err_ret); - } else { - /* Disable Function 2 */ - err_ret = sdio_disable_func(sdfunc); - if (err_ret) - brcmf_err("Disable F2 failed:%d\n", - err_ret); - } - } else { - err_ret = -ENOENT; - } - } else if ((regaddr == SDIO_CCCR_ABORT) || - (regaddr == SDIO_CCCR_IENx)) { + if ((regaddr == SDIO_CCCR_ABORT) || + (regaddr == SDIO_CCCR_IENx)) { sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func), GFP_KERNEL); if (!sdfunc) @@ -945,6 +929,9 @@ static int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev) goto out; } + /* increase F2 timeout */ + sdiodev->func[2]->enable_timeout = SDIO_WAIT_F2RDY; + /* Enable Function 1 */ err_ret = sdio_enable_func(sdiodev->func[1]); if (err_ret) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 0f95f3e79c1..c3f3d8d0eab 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -260,9 +260,6 @@ struct rte_console { #define MAX_HDR_READ (1 << 6) #define MAX_RX_DATASZ 2048 -/* Maximum milliseconds to wait for F2 to come up */ -#define BRCMF_WAIT_F2RDY 3000 - /* Bump up limit on waiting for HT to account for first startup; * if the image is doing a CRC calculation before programming the PMU * for HT availability, it could take a couple hundred ms more, so @@ -2265,8 +2262,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) /* Turn off the bus (F2), free any pending packets */ brcmf_dbg(INTR, "disable SDIO interrupts\n"); - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1, - NULL); + sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); /* Clear any pending interrupts now that F2 is disabled */ w_sdreg32(bus, local_hostintmask, @@ -3570,8 +3566,6 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; - unsigned long timeout; - u8 ready, enable; int err, ret = 0; u8 saveclk; @@ -3612,26 +3606,13 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* Enable function 2 (frame transfers) */ w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, offsetof(struct sdpcmd_regs, tosbmailboxdata)); - enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2); - - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL); + err = sdio_enable_func(bus->sdiodev->func[SDIO_FUNC_2]); - timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY); - ready = 0; - while (enable != ready) { - ready = brcmf_sdio_regrb(bus->sdiodev, - SDIO_CCCR_IORx, NULL); - if (time_after(jiffies, timeout)) - break; - else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50)) - /* prevent busy waiting if it takes too long */ - msleep_interruptible(20); - } - brcmf_dbg(INFO, "enable 0x%02x, ready 0x%02x\n", enable, ready); + brcmf_dbg(INFO, "enable F2: err=%d\n", err); /* If F2 successfully enabled, set core and enable interrupts */ - if (ready == enable) { + if (!err) { /* Set up the interrupt mask and enable interrupts */ bus->hostintmask = HOSTINTMASK; w_sdreg32(bus, bus->hostintmask, @@ -3640,8 +3621,7 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err); } else { /* Disable F2 again */ - enable = SDIO_FUNC_ENABLE_1; - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL); + sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); ret = -ENODEV; } @@ -3942,8 +3922,7 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus) sdio_claim_host(bus->sdiodev->func[1]); /* Disable F2 to clear any intermediate frame state on the dongle */ - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, - SDIO_FUNC_ENABLE_1, NULL); + sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; bus->rxflow = false; |