diff options
| -rw-r--r-- | drivers/i2c/busses/i2c-ali1535.c | 11 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-nforce2.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sis5595.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sis630.c | 6 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-viapro.c | 7 |
5 files changed, 20 insertions, 10 deletions
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index b6807db7b36..5b667e53a81 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -140,7 +140,7 @@ static unsigned short ali1535_smba; defined to make the transition easier. */ static int __devinit ali1535_setup(struct pci_dev *dev) { - int retval = -ENODEV; + int retval; unsigned char temp; /* Check the following things: @@ -155,6 +155,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev) if (ali1535_smba == 0) { dev_warn(&dev->dev, "ALI1535_smb region uninitialized - upgrade BIOS?\n"); + retval = -ENODEV; goto exit; } @@ -167,6 +168,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev) ali1535_driver.name)) { dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n", ali1535_smba); + retval = -EBUSY; goto exit; } @@ -174,6 +176,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev) pci_read_config_byte(dev, SMBCFG, &temp); if ((temp & ALI1535_SMBIO_EN) == 0) { dev_err(&dev->dev, "SMB device not enabled - upgrade BIOS?\n"); + retval = -ENODEV; goto exit_free; } @@ -181,6 +184,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev) pci_read_config_byte(dev, SMBHSTCFG, &temp); if ((temp & 1) == 0) { dev_err(&dev->dev, "SMBus controller not enabled - upgrade BIOS?\n"); + retval = -ENODEV; goto exit_free; } @@ -198,12 +202,11 @@ static int __devinit ali1535_setup(struct pci_dev *dev) dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&dev->dev, "ALI1535_smba = 0x%X\n", ali1535_smba); - retval = 0; -exit: - return retval; + return 0; exit_free: release_region(ali1535_smba, ALI1535_SMB_IOSIZE); +exit: return retval; } diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index ff1e127dfea..4853b52a40a 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -356,7 +356,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, error = acpi_check_region(smbus->base, smbus->size, nforce2_driver.name); if (error) - return -1; + return error; if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 437586611d4..6d60284cc04 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -147,7 +147,7 @@ static int __devinit sis5595_setup(struct pci_dev *SIS5595_dev) u16 a; u8 val; int *i; - int retval = -ENODEV; + int retval; /* Look for imposters */ for (i = blacklist; *i != 0; i++) { @@ -223,7 +223,7 @@ static int __devinit sis5595_setup(struct pci_dev *SIS5595_dev) error: release_region(sis5595_base + SMB_INDEX, 2); - return retval; + return -ENODEV; } static int sis5595_transaction(struct i2c_adapter *adap) diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index e6f539e26f6..b617fd068ac 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -393,7 +393,7 @@ static int __devinit sis630_setup(struct pci_dev *sis630_dev) { unsigned char b; struct pci_dev *dummy = NULL; - int retval = -ENODEV, i; + int retval, i; /* check for supported SiS devices */ for (i=0; supported[i] > 0 ; i++) { @@ -418,18 +418,21 @@ static int __devinit sis630_setup(struct pci_dev *sis630_dev) */ if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG,&b)) { dev_err(&sis630_dev->dev, "Error: Can't read bios ctl reg\n"); + retval = -ENODEV; goto exit; } /* if ACPI already enabled , do nothing */ if (!(b & 0x80) && pci_write_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, b | 0x80)) { dev_err(&sis630_dev->dev, "Error: Can't enable ACPI\n"); + retval = -ENODEV; goto exit; } /* Determine the ACPI base address */ if (pci_read_config_word(sis630_dev,SIS630_ACPI_BASE_REG,&acpi_base)) { dev_err(&sis630_dev->dev, "Error: Can't determine ACPI base address\n"); + retval = -ENODEV; goto exit; } @@ -445,6 +448,7 @@ static int __devinit sis630_setup(struct pci_dev *sis630_dev) sis630_driver.name)) { dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already " "in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA); + retval = -EBUSY; goto exit; } diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 0b012f1f8ac..58261d4725b 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -324,7 +324,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, const struct pci_device_id *id) { unsigned char temp; - int error = -ENODEV; + int error; /* Determine the address of the SMBus areas */ if (force_addr) { @@ -390,6 +390,7 @@ found: dev_err(&pdev->dev, "SMBUS: Error: Host SMBus " "controller not enabled! - upgrade BIOS or " "use force=1\n"); + error = -ENODEV; goto release_region; } } @@ -422,9 +423,11 @@ found: "SMBus Via Pro adapter at %04x", vt596_smba); vt596_pdev = pci_dev_get(pdev); - if (i2c_add_adapter(&vt596_adapter)) { + error = i2c_add_adapter(&vt596_adapter); + if (error) { pci_dev_put(vt596_pdev); vt596_pdev = NULL; + goto release_region; } /* Always return failure here. This is to allow other drivers to bind |