diff options
482 files changed, 34844 insertions, 19523 deletions
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index d9a372d06e7..e3f93fb9224 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -17,6 +17,10 @@ SunXi family + User Manual http://dl.linux-sunxi.org/A10/A10%20User%20Manual%20-%20v1.20%20%282012-04-09%2c%20DECRYPTED%29.pdf + - Allwinner A10s (sun5i) + + Datasheet + http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf + - Allwinner A13 (sun5i) + Datasheet http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt new file mode 100644 index 00000000000..92d36e2aa87 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cci.txt @@ -0,0 +1,172 @@ +======================================================= +ARM CCI cache coherent interconnect binding description +======================================================= + +ARM multi-cluster systems maintain intra-cluster coherency through a +cache coherent interconnect (CCI) that is capable of monitoring bus +transactions and manage coherency, TLB invalidations and memory barriers. + +It allows snooping and distributed virtual memory message broadcast across +clusters, through memory mapped interface, with a global control register +space and multiple sets of interface control registers, one per slave +interface. + +Bindings for the CCI node follow the ePAPR standard, available from: + +www.power.org/documentation/epapr-version-1-1/ + +with the addition of the bindings described in this document which are +specific to ARM. + +* CCI interconnect node + + Description: Describes a CCI cache coherent Interconnect component + + Node name must be "cci". + Node's parent must be the root node /, and the address space visible + through the CCI interconnect is the same as the one seen from the + root node (ie from CPUs perspective as per DT standard). + Every CCI node has to define the following properties: + + - compatible + Usage: required + Value type: <string> + Definition: must be set to + "arm,cci-400" + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies base physical + address of CCI control registers common to all + interfaces. + + - ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Follow rules in the ePAPR for + hierarchical bus addressing. CCI interfaces + addresses refer to the parent node addressing + scheme to declare their register bases. + + CCI interconnect node can define the following child nodes: + + - CCI control interface nodes + + Node name must be "slave-if". + Parent node must be CCI interconnect node. + + A CCI control interface node must contain the following + properties: + + - compatible + Usage: required + Value type: <string> + Definition: must be set to + "arm,cci-400-ctrl-if" + + - interface-type: + Usage: required + Value type: <string> + Definition: must be set to one of {"ace", "ace-lite"} + depending on the interface type the node + represents. + + - reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the + corresponding interface programming + registers. + +* CCI interconnect bus masters + + Description: masters in the device tree connected to a CCI port + (inclusive of CPUs and their cpu nodes). + + A CCI interconnect bus master node must contain the following + properties: + + - cci-control-port: + Usage: required + Value type: <phandle> + Definition: a phandle containing the CCI control interface node + the master is connected to. + +Example: + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + cci-control-port = <&cci_control1>; + reg = <0x0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + cci-control-port = <&cci_control1>; + reg = <0x1>; + }; + + CPU2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + cci-control-port = <&cci_control2>; + reg = <0x100>; + }; + + CPU3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + cci-control-port = <&cci_control2>; + reg = <0x101>; + }; + + }; + + dma0: dma@3000000 { + compatible = "arm,pl330", "arm,primecell"; + cci-control-port = <&cci_control0>; + reg = <0x0 0x3000000 0x0 0x1000>; + interrupts = <10>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + cci@2c090000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x2c090000 0 0x1000>; + ranges = <0x0 0x0 0x2c090000 0x6000>; + + cci_control0: slave-if@1000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace-lite"; + reg = <0x1000 0x1000>; + }; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + +This CCI node corresponds to a CCI component whose control registers sits +at address 0x000000002c090000. +CCI slave interface @0x000000002c091000 is connected to dma controller dma0. +CCI slave interface @0x000000002c094000 is connected to CPUs {CPU0, CPU1}; +CCI slave interface @0x000000002c095000 is connected to CPUs {CPU2, CPU3}; diff --git a/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/Documentation/devicetree/bindings/arm/keystone/keystone.txt new file mode 100644 index 00000000000..63c0e6ae5cf --- /dev/null +++ b/Documentation/devicetree/bindings/arm/keystone/keystone.txt @@ -0,0 +1,10 @@ +TI Keystone Platforms Device Tree Bindings +----------------------------------------------- + +Boards with Keystone2 based devices (TCI66xxK2H) SOC shall have the +following properties. + +Required properties: + - compatible: All TI specific devices present in Keystone SOC should be in + the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550 + type UART should use the specified compatible for those devices. diff --git a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt new file mode 100644 index 00000000000..3b8fbf3c00c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt @@ -0,0 +1,19 @@ +ARM Dual Cluster System Configuration Block +------------------------------------------- + +The Dual Cluster System Configuration Block (DCSCB) provides basic +functionality for controlling clocks, resets and configuration pins in +the Dual Cluster System implemented by the Real-Time System Model (RTSM). + +Required properties: + +- compatible : should be "arm,rtsm,dcscb" + +- reg : physical base address and the size of the registers window + +Example: + + dcscb@60000000 { + compatible = "arm,rtsm,dcscb"; + reg = <0x60000000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/ste-u300.txt b/Documentation/devicetree/bindings/arm/ste-u300.txt new file mode 100644 index 00000000000..69b5ab0b5f4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ste-u300.txt @@ -0,0 +1,46 @@ +ST-Ericsson U300 Device Tree Bindings + +For various board the "board" node may contain specific properties +that pertain to this particular board, such as board-specific GPIOs +or board power regulator supplies. + +Required root node property: + +compatible="stericsson,u300"; + +Required node: syscon +This contains the system controller. +- compatible: must be "stericsson,u300-syscon". +- reg: the base address and size of the system controller. + +Boards with the U300 SoC include: + +S365 "Small Board U365": + +Required node: s365 +This contains the board-specific information. +- compatible: must be "stericsson,s365". +- vana15-supply: the regulator supplying the 1.5V to drive the + board. +- syscon: a pointer to the syscon node so we can acccess the + syscon registers to set the board as self-powered. + +Example: + +/ { + model = "ST-Ericsson U300"; + compatible = "stericsson,u300"; + #address-cells = <1>; + #size-cells = <1>; + + s365 { + compatible = "stericsson,s365"; + vana15-supply = <&ab3100_ldo_d_reg>; + syscon = <&syscon>; + }; + + syscon: syscon@c0011000 { + compatible = "stericsson,u300-syscon"; + reg = <0xc0011000 0x1000>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt index d71b4b2c077..f46f5625d8a 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt @@ -184,6 +184,19 @@ clocks and IDs. cko2 170 srtc_gate 171 pata_gate 172 + sata_gate 173 + spdif_xtal_sel 174 + spdif0_sel 175 + spdif1_sel 176 + spdif0_pred 177 + spdif0_podf 178 + spdif1_pred 179 + spdif1_podf 180 + spdif0_com_sel 181 + spdif1_com_sel 182 + spdif0_gate 183 + spdif1_gate 184 + spdif_ipg_gate 185 Examples (for mx53): diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index 6deb6fd1c7c..a0e104f0527 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -208,6 +208,7 @@ clocks and IDs. pll4_post_div 193 pll5_post_div 194 pll5_video_div 195 + eim_slow 196 Examples: diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt new file mode 100644 index 00000000000..15e40bdf147 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt @@ -0,0 +1,10 @@ +* Clock bindings for Freescale i.MX6 SoloLite + +Required properties: +- compatible: Should be "fsl,imx6sl-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sl-clock.h +for the full list of i.MX6 SoloLite clock IDs. diff --git a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt new file mode 100644 index 00000000000..7cafcb98ead --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt @@ -0,0 +1,80 @@ +Clock bindings for ST-Ericsson U300 System Controller Clocks + +Bindings for the gated system controller clocks: + +Required properties: +- compatible: must be "stericsson,u300-syscon-clk" +- #clock-cells: must be <0> +- clock-type: specifies the type of clock: + 0 = slow clock + 1 = fast clock + 2 = rest/remaining clock +- clock-id: specifies the clock in the type range + +Optional properties: +- clocks: parent clock(s) + +The available clocks per type are as follows: + +Type: ID: Clock: +------------------- +0 0 Slow peripheral bridge clock +0 1 UART0 clock +0 4 GPIO clock +0 6 RTC clock +0 7 Application timer clock +0 8 Access timer clock + +1 0 Fast peripheral bridge clock +1 1 I2C bus 0 clock +1 2 I2C bus 1 clock +1 5 MMC interface peripheral (silicon) clock +1 6 SPI clock + +2 3 CPU clock +2 4 DMA controller clock +2 5 External Memory Interface (EMIF) clock +2 6 NAND flask interface clock +2 8 XGAM graphics engine clock +2 9 Shared External Memory Interface (SEMI) clock +2 10 AHB Subsystem Bridge clock +2 12 Interrupt controller clock + +Example: + +gpio_clk: gpio_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <4>; + clocks = <&slow_clk>; +}; + +gpio: gpio@c0016000 { + compatible = "stericsson,gpio-coh901"; + (...) + clocks = <&gpio_clk>; +}; + + +Bindings for the MMC/SD card clock: + +Required properties: +- compatible: must be "stericsson,u300-syscon-mclk" +- #clock-cells: must be <0> + +Optional properties: +- clocks: parent clock(s) + +mmc_mclk: mmc_mclk { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-mclk"; + clocks = <&mmc_pclk>; +}; + +mmcsd: mmcsd@c0001000 { + compatible = "arm,pl18x", "arm,primecell"; + clocks = <&mmc_pclk>, <&mmc_mclk>; + clock-names = "apb_pclk", "mclk"; + (...) +}; diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt new file mode 100644 index 00000000000..c80863d344a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt @@ -0,0 +1,26 @@ +* Clock bindings for Freescale Vybrid VF610 SOC + +Required properties: +- compatible: Should be "fsl,vf610-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h +for the full list of VF610 clock IDs. + +Examples: + +clks: ccm@4006b000 { + compatible = "fsl,vf610-ccm"; + reg = <0x4006b000 0x1000>; + #clock-cells = <1>; +}; + +uart1: serial@40028000 { + compatible = "fsl,vf610-uart"; + reg = <0x40028000 0x1000>; + interrupts = <0 62 0x04>; + clocks = <&clks VF610_CLK_UART1>; + clock-names = "ipg"; +}; diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt index 23ae1db1bc1..d99af878f5d 100644 --- a/Documentation/devicetree/bindings/clock/zynq-7000.txt +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt @@ -6,50 +6,99 @@ The purpose of this document is to document their usage. See clock_bindings.txt for more information on the generic clock bindings. See Chapter 25 of Zynq TRM for more information about Zynq clocks. -== PLLs == - -Used to describe the ARM_PLL, DDR_PLL, and IO_PLL. +== Clock Controller == +The clock controller is a logical abstraction of Zynq's clock tree. It reads +required input clock frequencies from the devicetree and acts as clock provider +for all clock consumers of PS clocks. Required properties: -- #clock-cells : shall be 0 (only one clock is output from this node) -- compatible : "xlnx,zynq-pll" -- reg : pair of u32 values, which are the address offsets within the SLCR - of the relevant PLL_CTRL register and PLL_CFG register respectively -- clocks : phandle for parent clock. should be the phandle for ps_clk + - #clock-cells : Must be 1 + - compatible : "xlnx,ps7-clkc" + - ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ + (usually 33 MHz oscillators are used for Zynq platforms) + - clock-output-names : List of strings used to name the clock outputs. Shall be + a list of the outputs given below. Optional properties: -- clock-output-names : name of the output clock - -Example: - armpll: armpll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x100 0x110>; - clock-output-names = "armpll"; - }; - -== Peripheral clocks == + - clocks : as described in the clock bindings + - clock-names : as described in the clock bindings -Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks. +Clock inputs: +The following strings are optional parameters to the 'clock-names' property in +order to provide an optional (E)MIO clock source. + - swdt_ext_clk + - gem0_emio_clk + - gem1_emio_clk + - mio_clk_XX # with XX = 00..53 +... -Required properties: -- #clock-cells : shall be 1 -- compatible : "xlnx,zynq-periph-clock" -- reg : a single u32 value, describing the offset within the SLCR where - the CLK_CTRL register is found for this peripheral -- clocks : phandle for parent clocks. should hold phandles for - the IO_PLL, ARM_PLL, and DDR_PLL in order -- clock-output-names : names of the output clock(s). For peripherals that have - two output clocks (for example, the UART), two clocks - should be listed. +Clock outputs: + 0: armpll + 1: ddrpll + 2: iopll + 3: cpu_6or4x + 4: cpu_3or2x + 5: cpu_2x + 6: cpu_1x + 7: ddr2x + 8: ddr3x + 9: dci + 10: lqspi + 11: smc + 12: pcap + 13: gem0 + 14: gem1 + 15: fclk0 + 16: fclk1 + 17: fclk2 + 18: fclk3 + 19: can0 + 20: can1 + 21: sdio0 + 22: sdio1 + 23: uart0 + 24: uart1 + 25: spi0 + 26: spi1 + 27: dma + 28: usb0_aper + 29: usb1_aper + 30: gem0_aper + 31: gem1_aper + 32: sdio0_aper + 33: sdio1_aper + 34: spi0_aper + 35: spi1_aper + 36: can0_aper + 37: can1_aper + 38: i2c0_aper + 39: i2c1_aper + 40: uart0_aper + 41: uart1_aper + 42: gpio_aper + 43: lqspi_aper + 44: smc_aper + 45: swdt + 46: dbg_trc + 47: dbg_apb Example: - uart_clk: uart_clk { + clkc: clkc { #clock-cells = <1>; - compatible = "xlnx,zynq-periph-clock"; - clocks = <&iopll &armpll &ddrpll>; - reg = <0x154>; - clock-output-names = "uart0_ref_clk", - "uart1_ref_clk"; + compatible = "xlnx,ps7-clkc"; + ps-clk-frequency = <33333333>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; + # optional props + clocks = <&clkc 16>, <&clk_foo>; + clock-names = "gem1_emio_clk", "can_mio_clk_23"; }; diff --git a/Documentation/devicetree/bindings/dma/ste-coh901318.txt b/Documentation/devicetree/bindings/dma/ste-coh901318.txt new file mode 100644 index 00000000000..091ad057e9c --- /dev/null +++ b/Documentation/devicetree/bindings/dma/ste-coh901318.txt @@ -0,0 +1,32 @@ +ST-Ericsson COH 901 318 DMA Controller + +This is a DMA controller which has begun as a fork of the +ARM PL08x PrimeCell VHDL code. + +Required properties: +- compatible: should be "stericsson,coh901318" +- reg: register locations and length +- interrupts: the single DMA IRQ +- #dma-cells: must be set to <1>, as the channels on the + COH 901 318 are simple and identified by a single number +- dma-channels: the number of DMA channels handled + +Example: + +dmac: dma-controller@c00020000 { + compatible = "stericsson,coh901318"; + reg = <0xc0020000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <2>; + #dma-cells = <1>; + dma-channels = <40>; +}; + +Consumers example: + +uart0: serial@c0013000 { + compatible = "..."; + (...) + dmas = <&dmac 17 &dmac 18>; + dma-names = "tx", "rx"; +}; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt new file mode 100644 index 00000000000..9fbbdb783a7 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -0,0 +1,34 @@ +TI EDMA + +Required properties: +- compatible : "ti,edma3" +- ti,edma-regions: Number of regions +- ti,edma-slots: Number of slots +- #dma-cells: Should be set to <1> + Clients should use a single channel number per DMA request. +- dma-channels: Specify total DMA channels per CC +- reg: Memory map for accessing module +- interrupt-parent: Interrupt controller the interrupt is routed through +- interrupts: Exactly 3 interrupts need to be specified in the order: + 1. Transfer completion interrupt. + 2. Memory protection interrupt. + 3. Error interrupt. +Optional properties: +- ti,hwmods: Name of the hwmods associated to the EDMA +- ti,edma-xbar-event-map: Crossbar event to channel map + +Example: + +edma: edma@49000000 { + reg = <0x49000000 0x10000>; + interrupt-parent = <&intc>; + interrupts = <12 13 14>; + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + #dma-cells = <1>; + dma-channels = <64>; + ti,edma-regions = <4>; + ti,edma-slots = <256>; + ti,edma-xbar-event-map = <1 12 + 2 13>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt new file mode 100644 index 00000000000..e0d0446a6b7 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt @@ -0,0 +1,28 @@ +Cirrus Logic CLPS711X GPIO controller + +Required properties: +- compatible: Should be "cirrus,clps711x-gpio" +- reg: Physical base GPIO controller registers location and length. + There should be two registers, first is DATA register, the second + is DIRECTION. +- gpio-controller: Marks the device node as a gpio controller. +- #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low + +Note: Each GPIO port should have an alias correctly numbered in "aliases" +node. + +Example: + +aliases { + gpio0 = &porta; +}; + +porta: gpio@80000000 { + compatible = "cirrus,clps711x-gpio"; + reg = <0x80000000 0x1>, <0x80000040 0x1>; + gpio-controller; + #gpio-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt b/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt new file mode 100644 index 00000000000..fd665b44d76 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt @@ -0,0 +1,7 @@ +ST-Ericsson COH 901 571/3 GPIO controller + +Required properties: +- compatible: Compatible property value should be "stericsson,gpio-coh901" +- reg: Physical base address of the controller and length of memory mapped + region. +- interrupts: the 0...n interrupts assigned to the different GPIO ports/banks. diff --git a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt b/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt new file mode 100644 index 00000000000..bd81a482634 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt @@ -0,0 +1,15 @@ +ST Microelectronics DDC I2C + +Required properties : +- compatible : Must be "st,ddci2c" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- Child nodes conforming to i2c bus binding + +Examples : + diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt new file mode 100644 index 00000000000..e2371f5cdeb --- /dev/null +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -0,0 +1,73 @@ +* Synopsis Designware PCIe interface + +Required properties: +- compatible: should contain "snps,dw-pcie" to identify the + core, plus an identifier for the specific instance, such + as "samsung,exynos5440-pcie". +- reg: base addresses and lengths of the pcie controller, + the phy controller, additional register for the phy controller. +- interrupts: interrupt values for level interrupt, + pulse interrupt, special interrupt. +- clocks: from common clock binding: handle to pci clock. +- clock-names: from common clock binding: should be "pcie" and "pcie_bus". +- #address-cells: set to <3> +- #size-cells: set to <2> +- device_type: set to "pci" +- ranges: ranges for the PCI memory and I/O regions +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map: standard PCI properties + to define the mapping of the PCIe interface to interrupt + numbers. +- reset-gpio: gpio pin number of power good signal + +Example: + +SoC specific DT Entry: + + pcie@290000 { + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; + reg = <0x290000 0x1000 + 0x270000 0x1000 + 0x271000 0x40>; + interrupts = <0 20 0>, <0 21 0>, <0 22 0>; + clocks = <&clock 28>, <&clock 27>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000 /* configuration space */ + 0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 53>; + }; + + pcie@2a0000 { + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; + reg = <0x2a0000 0x1000 + 0x272000 0x1000 + 0x271040 0x40>; + interrupts = <0 23 0>, <0 24 0>, <0 25 0>; + clocks = <&clock 29>, <&clock 27>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000 /* configuration space */ + 0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 56>; + }; + +Board specific DT Entry: + + pcie@290000 { + reset-gpio = <&pin_ctrl 5 0>; + }; + + pcie@2a0000 { + reset-gpio = <&pin_ctrl 22 0>; + }; diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt new file mode 100644 index 00000000000..f8d405897a9 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -0,0 +1,221 @@ +* Marvell EBU PCIe interfaces + +Mandatory properties: +- compatible: one of the following values: + marvell,armada-370-pcie + marvell,armada-xp-pcie + marvell,kirkwood-pcie +- #address-cells, set to <3> +- #size-cells, set to <2> +- #interrupt-cells, set to <1> +- bus-range: PCI bus numbers covered +- device_type, set to "pci" +- ranges: ranges for the PCI memory and I/O regions, as well as the + MMIO registers to control the PCIe interfaces. + +In addition, the Device Tree node must have sub-nodes describing each +PCIe interface, having the following mandatory properties: +- reg: used only for interrupt mapping, so only the first four bytes + are used to refer to the correct bus number and device number. +- assigned-addresses: reference to the MMIO registers used to control + this PCIe interface. +- clocks: the clock associated to this PCIe interface +- marvell,pcie-port: the physical PCIe port number +- status: either "disabled" or "okay" +- device_type, set to "pci" +- #address-cells, set to <3> +- #size-cells, set to <2> +- #interrupt-cells, set to <1> +- ranges, empty property. +- interrupt-map-mask and interrupt-map, standard PCI properties to + define the mapping of the PCIe interface to interrupt numbers. + +and the following optional properties: +- marvell,pcie-lane: the physical PCIe lane number, for ports having + multiple lanes. If this property is not found, we assume that the + value is 0. + +Example: + +pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; +}; diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt new file mode 100644 index 00000000000..41aeed38926 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci.txt @@ -0,0 +1,9 @@ +PCI bus bridges have standardized Device Tree bindings: + +PCI Bus Binding to: IEEE Std 1275-1994 +http://www.openfirmware.org/ofwg/bindings/pci/pci2_1.pdf + +And for the interrupt mapping part: + +Open Firmware Recommended Practice: Interrupt Mapping +http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt new file mode 100644 index 00000000000..30b364e504b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt @@ -0,0 +1,15 @@ +V3 Semiconductor V360 EPC PCI bridge + +This bridge is found in the ARM Integrator/AP (Application Platform) + +Integrator-specific notes: + +- syscon: should contain a link to the syscon device node (since + on the Integrator, some registers in the syscon are required to + operate the V3). + +V360 EPC specific notes: + +- reg: should contain the base address of the V3 adapter. +- interrupts: should contain a reference to the V3 error interrupt + as routed on the system. diff --git a/Documentation/devicetree/bindings/rtc/dw-apb.txt b/Documentation/devicetree/bindings/rtc/dw-apb.txt index 93e2b0f048e..eb2327b2bdb 100644 --- a/Documentation/devicetree/bindings/rtc/dw-apb.txt +++ b/Documentation/devicetree/bindings/rtc/dw-apb.txt @@ -5,9 +5,20 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: IRQ line for the timer. +- either clocks+clock-names or clock-frequency properties + +Optional properties: +- clocks : list of clock specifiers, corresponding to entries in + the clock-names property; +- clock-names : should contain "timer" and "pclk" entries, matching entries + in the clocks property. - clock-frequency: The frequency in HZ of the timer. - clock-freq: For backwards compatibility with picoxcell +If using the clock specifiers, the pclk clock is optional, as not all +systems may use one. + + Example: timer1: timer@ffc09000 { @@ -23,3 +34,11 @@ Example: clock-frequency = <200000000>; reg = <0xffd00000 0x1000>; }; + + timer3: timer@ffe00000 { + compatible = "snps,dw-apb-timer-osc"; + interrupts = <0 170 4>; + reg = <0xffe00000 0x1000>; + clocks = <&timer_clk>, <&timer_pclk>; + clock-names = "timer", "pclk"; + }; diff --git a/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt b/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt new file mode 100644 index 00000000000..9499bc8ee9e --- /dev/null +++ b/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt @@ -0,0 +1,18 @@ +ST-Ericsson U300 apptimer + +Required properties: + +- compatible : should be "stericsson,u300-apptimer" +- reg : Specifies base physical address and size of the registers. +- interrupts : A list of 4 interrupts; one for each subtimer. These + are, in order: OS (operating system), DD (device driver) both + adopted for EPOC/Symbian with two specific IRQs for these tasks, + then GP1 and GP2, which are general-purpose timers. + +Example: + +timer { + compatible = "stericsson,u300-apptimer"; + reg = <0xc0014000 0x1000>; + interrupts = <24 25 26 27>; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 6931c4348d2..d247d100398 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -59,6 +59,7 @@ ste ST-Ericsson stericsson ST-Ericsson ti Texas Instruments toshiba Toshiba Corporation +v3 V3 Semiconductor via VIA Technologies, Inc. wlf Wolfson Microelectronics wm Wondermedia Technologies, Inc. diff --git a/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt b/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt new file mode 100644 index 00000000000..8ffb88e39e7 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt @@ -0,0 +1,19 @@ +ST-Ericsson COH 901 327 Watchdog timer + +Required properties: +- compatible: must be "stericsson,coh901327". +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: the interrupt used for the watchdog timeout warning. + +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + +Example: + +watchdog: watchdog@c0012000 { + compatible = "stericsson,coh901327"; + reg = <0xc0012000 0x1000>; + interrupts = <3>; + timeout-sec = <60>; +}; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 941dbb86a4d..7a13c2cd7a8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,7 +9,7 @@ config ARM select BUILDTIME_EXTABLE_SORT if MMU select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU - select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) + select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW @@ -366,11 +366,12 @@ config ARCH_CLPS711X select ARCH_REQUIRE_GPIOLIB select AUTO_ZRELADDR select CLKDEV_LOOKUP + select CLKSRC_MMIO select COMMON_CLK select CPU_ARM720T select GENERIC_CLOCKEVENTS + select MFD_SYSCON select MULTI_IRQ_HANDLER - select NEED_MACH_MEMORY_H select SPARSE_IRQ help Support for Cirrus Logic 711x/721x/731x based boards. @@ -502,6 +503,7 @@ config ARCH_DOVE config ARCH_KIRKWOOD bool "Marvell Kirkwood" + select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select GENERIC_CLOCKEVENTS @@ -634,6 +636,7 @@ config ARCH_MSM config ARCH_SHMOBILE bool "Renesas SH-Mobile / R-Mobile" + select ARM_PATCH_PHYS_VIRT select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP @@ -643,9 +646,8 @@ config ARCH_SHMOBILE select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select MULTI_IRQ_HANDLER - select NEED_MACH_MEMORY_H select NO_IOPORT - select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB + select PINCTRL select PM_GENERIC_DOMAINS if PM select SPARSE_IRQ help @@ -695,6 +697,7 @@ config ARCH_S3C24XX select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -702,6 +705,7 @@ config ARCH_S3C24XX select MULTI_IRQ_HANDLER select NEED_MACH_GPIO_H select NEED_MACH_IO_H + select SAMSUNG_ATAGS help Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 SoCs based systems, such as the Simtec Electronics BAST @@ -717,6 +721,7 @@ config ARCH_S3C64XX select CLKSRC_MMIO select CPU_V6 select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -726,6 +731,7 @@ config ARCH_S3C64XX select PLAT_SAMSUNG select S3C_DEV_NAND select S3C_GPIO_TRACK + select SAMSUNG_ATAGS select SAMSUNG_CLKSRC select SAMSUNG_GPIOLIB_4BIT select SAMSUNG_IRQ_VIC_TIMER @@ -740,12 +746,14 @@ config ARCH_S5P64X0 select CLKSRC_MMIO select CPU_V6 select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select SAMSUNG_WDT_RESET + select SAMSUNG_ATAGS help Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. @@ -757,12 +765,14 @@ config ARCH_S5PC100 select CLKSRC_MMIO select CPU_V7 select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select SAMSUNG_WDT_RESET + select SAMSUNG_ATAGS help Samsung S5PC100 series based systems @@ -775,12 +785,14 @@ config ARCH_S5PV210 select CLKSRC_MMIO select CPU_V7 select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H + select SAMSUNG_ATAGS help Samsung S5PV210/S5PC110 series based systems @@ -788,7 +800,9 @@ config ARCH_EXYNOS bool "Samsung EXYNOS" select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB select ARCH_SPARSEMEM_ENABLE + select ARM_GIC select CLKDEV_LOOKUP select COMMON_CLK select CPU_V7 @@ -797,8 +811,9 @@ config ARCH_EXYNOS select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H + select SPARSE_IRQ + select USE_OF help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) @@ -816,23 +831,6 @@ config ARCH_SHARK Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). -config ARCH_U300 - bool "ST-Ericsson U300 Series" - depends on MMU - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select ARM_PATCH_PHYS_VIRT - select ARM_VIC - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select COMMON_CLK - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select HAVE_TCM - select SPARSE_IRQ - help - Support for ST-Ericsson U300 series mobile platforms. - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -843,6 +841,7 @@ config ARCH_DAVINCI select GENERIC_IRQ_CHIP select HAVE_IDE select NEED_MACH_GPIO_H + select TI_PRIV_EDMA select USE_OF select ZONE_DMA help @@ -874,20 +873,21 @@ menu "Multiple platform selection" comment "CPU Core family selection" -config ARCH_MULTI_V4 - bool "ARMv4 based platforms (FA526, StrongARM)" - depends on !ARCH_MULTI_V6_V7 - select ARCH_MULTI_V4_V5 - config ARCH_MULTI_V4T bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" depends on !ARCH_MULTI_V6_V7 select ARCH_MULTI_V4_V5 + select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \ + CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \ + CPU_ARM925T || CPU_ARM940T) config ARCH_MULTI_V5 bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" depends on !ARCH_MULTI_V6_V7 select ARCH_MULTI_V4_V5 + select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \ + CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ + CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) config ARCH_MULTI_V4_V5 bool @@ -951,6 +951,8 @@ source "arch/arm/mach-iop13xx/Kconfig" source "arch/arm/mach-ixp4xx/Kconfig" +source "arch/arm/mach-keystone/Kconfig" + source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" @@ -984,6 +986,8 @@ source "arch/arm/mach-mmp/Kconfig" source "arch/arm/mach-realview/Kconfig" +source "arch/arm/mach-rockchip/Kconfig" + source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" @@ -1420,6 +1424,7 @@ config PCI_HOST_ITE8152 select DMABOUNCE source "drivers/pci/Kconfig" +source "drivers/pci/pcie/Kconfig" source "drivers/pcmcia/Kconfig" @@ -1587,6 +1592,7 @@ config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 512 if SOC_OMAP5 + default 512 if ARCH_KEYSTONE default 392 if ARCH_U8500 default 352 if ARCH_VT8500 default 288 if ARCH_SUNXI @@ -1612,7 +1618,7 @@ config SCHED_HRTICK config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY - depends on CPU_V7 && !CPU_V6 && !CPU_V6K + depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K default y if CPU_THUMBONLY select AEABI select ARM_ASM_UNIFIED @@ -2067,7 +2073,7 @@ config CRASH_DUMP config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address" - depends on !ZBOOT_ROM && !ARCH_U300 + depends on !ZBOOT_ROM help ZRELADDR is the physical address where the decompressed kernel image will be placed. If AUTO_ZRELADDR is selected, the address diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 2cef8e13f9f..c859495da48 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -28,7 +28,7 @@ config FLASH_SIZE config PROCESSOR_ID hex 'Hard wire the processor ID' default 0x00007700 - depends on !CPU_CP15 + depends on !(CPU_CP15 || CPU_V7M) help If processor has no CP15 register, this processor ID is used instead of the auto-probing which utilizes the register. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 1d41908d5cd..ab95f07e154 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -251,6 +251,27 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6Q/DL. + config DEBUG_IMX6SL_UART + bool "i.MX6SL Debug UART" + depends on SOC_IMX6SL + help + Say Y here if you want kernel low-level debugging support + on i.MX6SL. + + config DEBUG_KEYSTONE_UART0 + bool "Kernel low-level debugging on KEYSTONE2 using UART0" + depends on ARCH_KEYSTONE + help + Say Y here if you want the debug print routines to direct + their output to UART0 serial port on KEYSTONE2 devices. + + config DEBUG_KEYSTONE_UART1 + bool "Kernel low-level debugging on KEYSTONE2 using UART1" + depends on ARCH_KEYSTONE + help + Say Y here if you want the debug print routines to direct + their output to UART1 serial port on KEYSTONE2 devices. + config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" depends on ARCH_MMP @@ -303,12 +324,37 @@ choice their output to the serial port on MSM 8960 devices. config DEBUG_MVEBU_UART - bool "Kernel low-level debugging messages via MVEBU UART" + bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" depends on ARCH_MVEBU help Say Y here if you want kernel low-level debugging support on MVEBU based platforms. + This option should be used with the old bootloaders + that left the internal registers mapped at + 0xd0000000. As of today, this is the case on + platforms such as the Globalscale Mirabox or the + Plathome OpenBlocks AX3, when using the original + bootloader. + + If the wrong DEBUG_MVEBU_UART* option is selected, + when u-boot hands over to the kernel, the system + silently crashes, with no serial output at all. + + config DEBUG_MVEBU_UART_ALTERNATE + bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)" + depends on ARCH_MVEBU + help + Say Y here if you want kernel low-level debugging support + on MVEBU based platforms. + + This option should be used with the new bootloaders + that remap the internal registers at 0xf1000000. + + If the wrong DEBUG_MVEBU_UART* option is selected, + when u-boot hands over to the kernel, the system + silently crashes, with no serial output at all. + config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK @@ -353,6 +399,13 @@ choice their output to the standard serial port on the RealView PB1176 platform. + config DEBUG_ROCKCHIP_UART + bool "Kernel low-level debugging messages via Rockchip UART" + depends on ARCH_ROCKCHIP + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS @@ -443,6 +496,13 @@ choice Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFmarco devices. + config DEBUG_U300_UART + bool "Kernel low-level debugging messages via U300 UART0" + depends on ARCH_U300 + help + Say Y here if you want the debug print routines to direct + their output to the uart port on U300 devices. + config DEBUG_UX500_UART depends on ARCH_U8500 bool "Use Ux500 UART for low-level debug" @@ -532,7 +592,8 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ DEBUG_IMX53_UART || \ - DEBUG_IMX6Q_UART + DEBUG_IMX6Q_UART || \ + DEBUG_IMX6SL_UART default 1 depends on ARCH_MXC help @@ -589,6 +650,32 @@ endchoice choice prompt "Low-level debug console UART" + depends on DEBUG_ROCKCHIP_UART + + config DEBUG_RK29_UART0 + bool "RK29 UART0" + + config DEBUG_RK29_UART1 + bool "RK29 UART1" + + config DEBUG_RK29_UART2 + bool "RK29 UART2" + + config DEBUG_RK3X_UART0 + bool "RK3X UART0" + + config DEBUG_RK3X_UART1 + bool "RK3X UART1" + + config DEBUG_RK3X_UART2 + bool "RK3X UART2" + + config DEBUG_RK3X_UART3 + bool "RK3X UART3" +endchoice + +choice + prompt "Low-level debug console UART" depends on DEBUG_LL && DEBUG_TEGRA_UART config TEGRA_DEBUG_UART_AUTO_ODMDATA @@ -631,18 +718,24 @@ config DEBUG_LL_INCLUDE DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ - DEBUG_IMX6Q_UART - default "debug/mvebu.S" if DEBUG_MVEBU_UART + DEBUG_IMX6Q_UART || \ + DEBUG_IMX6SL_UART + default "debug/keystone.S" if DEBUG_KEYSTONE_UART0 || \ + DEBUG_KEYSTONE_UART1 + default "debug/mvebu.S" if DEBUG_MVEBU_UART || \ + DEBUG_MVEBU_UART_ALTERNATE default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART default "debug/nomadik.S" if DEBUG_NOMADIK_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \ DEBUG_MMP_UART3 + default "debug/rockchip.S" if DEBUG_ROCKCHIP_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/tegra.S" if DEBUG_TEGRA_UART + default "debug/u300.S" if DEBUG_U300_UART default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7ea15176d10..c01e4a72855 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -59,6 +59,7 @@ comma = , # Note that GCC does not numerically define an architecture version # macro, but instead defines a whole series of macros which makes # testing for a specific architecture or later rather impossible. +arch-$(CONFIG_CPU_32v7M) :=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) # Only override the compiler option if ARMv6. The ARMv6K extensions are @@ -171,6 +172,7 @@ machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_REALVIEW) += realview +machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx @@ -194,9 +196,11 @@ machine-$(CONFIG_PLAT_SPEAR) += spear machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_ARCH_SUNXI) += sunxi +machine-$(CONFIG_ARCH_KEYSTONE) += keystone # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. +plat-$(CONFIG_ARCH_EXYNOS) += samsung plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_ARCH_S3C64XX) += samsung plat-$(CONFIG_PLAT_IOP) += iop diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S index fe3719b516f..e2d636336b7 100644 --- a/arch/arm/boot/compressed/head-shmobile.S +++ b/arch/arm/boot/compressed/head-shmobile.S @@ -46,7 +46,7 @@ __image_start: __image_end: .long _got_end __load_base: - .long CONFIG_MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM + .long MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM __loaded: .long __continue .align @@ -55,26 +55,9 @@ __tmp_stack: __continue: #endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */ - b 1f -__atags:@ tag #1 - .long 12 @ tag->hdr.size = tag_size(tag_core); - .long 0x54410001 @ tag->hdr.tag = ATAG_CORE; - .long 0 @ tag->u.core.flags = 0; - .long 0 @ tag->u.core.pagesize = 0; - .long 0 @ tag->u.core.rootdev = 0; - @ tag #2 - .long 8 @ tag->hdr.size = tag_size(tag_mem32); - .long 0x54410002 @ tag->hdr.tag = ATAG_MEM; - .long CONFIG_MEMORY_SIZE @ tag->u.mem.size = CONFIG_MEMORY_SIZE; - .long CONFIG_MEMORY_START @ @ tag->u.mem.start = CONFIG_MEMORY_START; - @ tag #3 - .long 0 @ tag->hdr.size = 0 - .long 0 @ tag->hdr.tag = ATAG_NONE; -1: - /* Set board ID necessary for boot */ ldr r7, 1f @ Set machine type register - adr r8, __atags @ Set atag register + mov r8, #0 @ pass null pointer as atag b 2f 1 : .long MACH_TYPE diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f0895c581a8..f9eae2f0ae5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -64,6 +64,8 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ + kirkwood-db-88f6281.dtb \ + kirkwood-db-88f6282.dtb \ kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ kirkwood-dockstar.dtb \ @@ -199,6 +201,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra114-pluto.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb +dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index d55042beb5c..f96de398c96 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -30,4 +30,12 @@ clock-frequency = <50000000>; }; }; + + pcie@290000 { + reset-gpio = <&pin_ctrl 5 0>; + }; + + pcie@2a0000 { + reset-gpio = <&pin_ctrl 22 0>; + }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index f6b1c897384..b7ffc4dfe21 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -113,7 +113,7 @@ clock-names = "spi", "spi_busclk0"; }; - pinctrl { + pin_ctrl: pinctrl { compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, @@ -216,4 +216,42 @@ clock-names = "rtc"; status = "disabled"; }; + + pcie@290000 { + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; + reg = <0x290000 0x1000 + 0x270000 0x1000 + 0x271000 0x40>; + interrupts = <0 20 0>, <0 21 0>, <0 22 0>; + clocks = <&clock 28>, <&clock 27>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000 /* configuration space */ + 0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 53>; + }; + + pcie@2a0000 { + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; + reg = <0x2a0000 0x1000 + 0x272000 0x1000 + 0x271040 0x40>; + interrupts = <0 23 0>, <0 24 0>, <0 25 0>; + clocks = <&clock 29>, <&clock 27>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000 /* configuration space */ + 0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 56>; + }; }; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index c9c3fa34464..b6b82eca8d1 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -39,6 +39,47 @@ valid-mask = <0x003fffff>; }; + pci: pciv3@62000000 { + compatible = "v3,v360epc-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x62000000 0x10000>; + interrupt-parent = <&pic>; + interrupts = <17>; /* Bus error IRQ */ + ranges = <0x00000000 0 0x61000000 /* config space */ + 0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */ + 0x01000000 0 0x0 /* I/O space */ + 0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */ + 0x02000000 0 0x00000000 /* non-prefectable memory */ + 0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */ + 0x42000000 0 0x10000000 /* prefetchable memory */ + 0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */ + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = < + /* IDSEL 9 */ + 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ + 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ + 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ + 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ + /* IDSEL 10 */ + 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ + 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ + 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ + 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ + /* IDSEL 11 */ + 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ + 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ + 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ + 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ + /* IDSEL 12 */ + 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ + 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ + 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ + 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ + >; + }; + fpga { /* * The Integator/AP predates the idea to have magic numbers diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts new file mode 100644 index 00000000000..1334b42c6b7 --- /dev/null +++ b/arch/arm/boot/dts/keystone.dts @@ -0,0 +1,117 @@ +/* + * Copyright 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "Texas Instruments Keystone 2 SoC"; + compatible = "ti,keystone-evm"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + }; + + memory { + reg = <0x00000000 0x80000000 0x00000000 0x40000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gic>; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <3>; + }; + }; + + gic: interrupt-controller { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #size-cells = <0>; + #address-cells = <1>; + interrupt-controller; + reg = <0x0 0x02561000 0x0 0x1000>, + <0x0 0x02562000 0x0 0x2000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0x308>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <0 20 0xf01>, + <0 21 0xf01>, + <0 22 0xf01>, + <0 23 0xf01>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,keystone","simple-bus"; + interrupt-parent = <&gic>; + ranges = <0x0 0x0 0x0 0xc0000000>; + + rstctrl: reset-controller { + compatible = "ti,keystone-reset"; + reg = <0x023100e8 4>; /* pll reset control reg */ + }; + + uart0: serial@02530c00 { + compatible = "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02530c00 0x100>; + clock-frequency = <133120000>; + interrupts = <0 277 0xf01>; + }; + + uart1: serial@02531000 { + compatible = "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02531000 0x100>; + clock-frequency = <133120000>; + interrupts = <0 280 0xf01>; + }; + + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index d6c9d65cbae..51376683dbc 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -40,5 +40,36 @@ marvell,function = "sdio"; }; }; + + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 23991e45bc5..66a751ab551 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -65,5 +65,53 @@ clocks = <&gate_clk 7>; status = "disabled"; }; + + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x00044000 0x00044000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 10>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 18>; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts new file mode 100644 index 00000000000..9d777edd1f3 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -0,0 +1,30 @@ +/* + * Marvell DB-88F6281-BP Development Board Setup + * + * Saeed Bishara <saeed@marvell.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/include/ "kirkwood-db.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "Marvell DB-88F6281-BP Development Board"; + compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts new file mode 100644 index 00000000000..f4c852886d2 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -0,0 +1,34 @@ +/* + * Marvell DB-88F6282-BP Development Board Setup + * + * Saeed Bishara <saeed@marvell.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/include/ "kirkwood-db.dtsi" +/include/ "kirkwood-6282.dtsi" + +/ { + model = "Marvell DB-88F6282-BP Development Board"; + compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + ocp@f1000000 { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + + pcie@2,0 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi new file mode 100644 index 00000000000..c87cfb81612 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -0,0 +1,89 @@ +/* + * Marvell DB-{88F6281,88F6282}-BP Development Board Setup + * + * Saeed Bishara <saeed@marvell.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are common between the 6281 + * and 6282 variants of the Marvell Kirkwood Development Board. + */ + +/include/ "kirkwood.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl@10000 { + pmx_sdio_gpios: pmx-sdio-gpios { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + chip-delay = <25>; + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x400000>; + }; + + partition@500000 { + label = "root"; + reg = <0x500000 0x1fb00000>; + }; + }; + + sata@80000 { + nr-ports = <2>; + status = "okay"; + }; + + ehci@50000 { + status = "okay"; + }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio_gpios>; + pinctrl-names = "default"; + wp-gpios = <&gpio1 5 0>; + cd-gpios = <&gpio1 6 0>; + status = "okay"; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 12ccf74ac3c..e591d5df769 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -109,6 +109,14 @@ reg = <0x980000 0x1f400000>; }; }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 758824118a9..90501cf129b 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -139,6 +139,14 @@ cd-gpios = <&gpio1 15 0>; /* No WP GPIO */ }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index 1ca66ab83ad..0f852b40f5c 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -111,6 +111,14 @@ status = "okay"; nr-ports = <2>; }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index a7412b937a8..9ddf218f2cb 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -176,6 +176,14 @@ reg = <0x5040000 0x2fc0000>; }; }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; }; gpio_keys { diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index 8295c833887..42648ab77c6 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -1,7 +1,8 @@ /dts-v1/; -/include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood.dtsi" /include/ "kirkwood-6281.dtsi" +/include/ "kirkwood-ts219.dtsi" / { ocp@f1000000 { diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index df3f95dfba3..95ceeb93ba5 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -1,7 +1,8 @@ /dts-v1/; -/include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood.dtsi" /include/ "kirkwood-6282.dtsi" +/include/ "kirkwood-ts219.dtsi" / { ocp@f1000000 { diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 64ea27cb329..7c022fd4aef 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -1,5 +1,3 @@ -/include/ "kirkwood.dtsi" - / { model = "QNAP TS219 family"; compatible = "qnap,ts219", "marvell,kirkwood"; @@ -74,5 +72,12 @@ status = "okay"; nr-ports = <2>; }; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index fada7e6d24d..7eef88f00fe 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -19,6 +19,7 @@ ocp@f1000000 { compatible = "simple-bus"; ranges = <0x00000000 0xf1000000 0x4000000 + 0xe0000000 0xe0000000 0x8100000 /* PCIE */ 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/rk3066a-clocks.dtsi b/arch/arm/boot/dts/rk3066a-clocks.dtsi new file mode 100644 index 00000000000..6e307fc4c45 --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-clocks.dtsi @@ -0,0 +1,299 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + dummy48m: dummy48m { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + + dummy150m: dummy150m { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + }; + + clk_gates0: gate-clk@200000d0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d0 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_core_periph", "gate_cpu_gpll", + "gate_ddrphy", "gate_aclk_cpu", + "gate_hclk_cpu", "gate_pclk_cpu", + "gate_atclk_cpu", "gate_i2s0", + "gate_i2s0_frac", "gate_i2s1", + "gate_i2s1_frac", "gate_i2s2", + "gate_i2s2_frac", "gate_spdif", + "gate_spdif_frac", "gate_testclk"; + + #clock-cells = <1>; + }; + + clk_gates1: gate-clk@200000d4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d4 0x4>; + clocks = <&xin24m>, <&xin24m>, + <&xin24m>, <&dummy>, + <&dummy>, <&xin24m>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>; + + clock-output-names = + "gate_timer0", "gate_timer1", + "gate_timer2", "gate_jtag", + "gate_aclk_lcdc1_src", "gate_otgphy0", + "gate_otgphy1", "gate_ddr_gpll", + "gate_uart0", "gate_frac_uart0", + "gate_uart1", "gate_frac_uart1", + "gate_uart2", "gate_frac_uart2", + "gate_uart3", "gate_frac_uart3"; + + #clock-cells = <1>; + }; + + clk_gates2: gate-clk@200000d8 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d8 0x4>; + clocks = <&clk_gates2 1>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&clk_gates2 3>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy48m>, + <&dummy>, <&dummy48m>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_periph_src", "gate_aclk_periph", + "gate_hclk_periph", "gate_pclk_periph", + "gate_smc", "gate_mac", + "gate_hsadc", "gate_hsadc_frac", + "gate_saradc", "gate_spi0", + "gate_spi1", "gate_mmc0", + "gate_mac_lbtest", "gate_mmc1", + "gate_emmc", "gate_tsadc"; + + #clock-cells = <1>; + }; + + clk_gates3: gate-clk@200000dc { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000dc 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_aclk_lcdc0_src", "gate_dclk_lcdc0", + "gate_dclk_lcdc1", "gate_pclkin_cif0", + "gate_pclkin_cif1", "reserved", + "reserved", "gate_cif0_out", + "gate_cif1_out", "gate_aclk_vepu", + "gate_hclk_vepu", "gate_aclk_vdpu", + "gate_hclk_vdpu", "gate_gpu_src", + "reserved", "gate_xin27m"; + + #clock-cells = <1>; + }; + + clk_gates4: gate-clk@200000e0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e0 0x4>; + clocks = <&clk_gates2 2>, <&clk_gates2 3>, + <&clk_gates2 1>, <&clk_gates2 1>, + <&clk_gates2 1>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates2 2>, + <&clk_gates0 4>, <&clk_gates0 4>, + <&clk_gates0 3>, <&clk_gates0 3>, + <&clk_gates0 3>, <&clk_gates2 3>, + <&clk_gates0 4>; + + clock-output-names = + "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix", + "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix", + "gate_aclk_pei_niu", "gate_hclk_usb_peri", + "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri", + "gate_hclk_cpubus", "gate_hclk_ahb2apb", + "gate_aclk_strc_sys", "gate_aclk_l2mem_con", + "gate_aclk_intmem", "gate_pclk_tsadc", + "gate_hclk_hdmi"; + + #clock-cells = <1>; + }; + + clk_gates5: gate-clk@200000e4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e4 0x4>; + clocks = <&clk_gates0 3>, <&clk_gates2 1>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 4>, <&clk_gates0 5>, + <&clk_gates2 1>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates4 5>, + <&clk_gates4 5>, <&dummy>; + + clock-output-names = + "gate_aclk_dmac1", "gate_aclk_dmac2", + "gate_pclk_efuse", "gate_pclk_tzpc", + "gate_pclk_grf", "gate_pclk_pmu", + "gate_hclk_rom", "gate_pclk_ddrupctl", + "gate_aclk_smc", "gate_hclk_nandc", + "gate_hclk_mmc0", "gate_hclk_mmc1", + "gate_hclk_emmc", "gate_hclk_otg0", + "gate_hclk_otg1", "gate_aclk_gpu"; + + #clock-cells = <1>; + }; + + clk_gates6: gate-clk@200000e8 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e8 0x4>; + clocks = <&clk_gates3 0>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates0 4>, <&clk_gates3 0>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates3 0>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates0 4>, <&clk_gates3 0>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_aclk_lcdc0", "gate_hclk_lcdc0", + "gate_hclk_lcdc1", "gate_aclk_lcdc1", + "gate_hclk_cif0", "gate_aclk_cif0", + "gate_hclk_cif1", "gate_aclk_cif1", + "gate_aclk_ipp", "gate_hclk_ipp", + "gate_hclk_rga", "gate_aclk_rga", + "gate_hclk_vio_bus", "gate_aclk_vio0", + "gate_aclk_vcodec", "gate_shclk_vio_h2h"; + + #clock-cells = <1>; + }; + + clk_gates7: gate-clk@200000ec { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000ec 0x4>; + clocks = <&clk_gates2 2>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates2 3>; + + clock-output-names = + "gate_hclk_emac", "gate_hclk_spdif", + "gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch", + "gate_hclk_i2s_8ch", "gate_hclk_hsadc", + "gate_hclk_pidf", "gate_pclk_timer0", + "gate_pclk_timer1", "gate_pclk_timer2", + "gate_pclk_pwm01", "gate_pclk_pwm23", + "gate_pclk_spi0", "gate_pclk_spi1", + "gate_pclk_saradc", "gate_pclk_wdt"; + + #clock-cells = <1>; + }; + + clk_gates8: gate-clk@200000f0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000f0 0x4>; + clocks = <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&dummy>, <&clk_gates0 5>; + + clock-output-names = + "gate_pclk_uart0", "gate_pclk_uart1", + "gate_pclk_uart2", "gate_pclk_uart3", + "gate_pclk_i2c0", "gate_pclk_i2c1", + "gate_pclk_i2c2", "gate_pclk_i2c3", + "gate_pclk_i2c4", "gate_pclk_gpio0", + "gate_pclk_gpio1", "gate_pclk_gpio2", + "gate_pclk_gpio3", "gate_pclk_gpio4", + "reserved", "gate_pclk_gpio6"; + + #clock-cells = <1>; + }; + + clk_gates9: gate-clk@200000f4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000f4 0x4>; + clocks = <&dummy>, <&clk_gates0 5>, + <&dummy>, <&dummy>, + <&dummy>, <&clk_gates1 4>, + <&clk_gates0 5>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>; + + clock-output-names = + "gate_clk_core_dbg", "gate_pclk_dbg", + "gate_clk_trace", "gate_atclk", + "gate_clk_l2c", "gate_aclk_vio1", + "gate_pclk_publ", "gate_aclk_intmem0", + "gate_aclk_intmem1", "gate_aclk_intmem2", + "gate_aclk_intmem3"; + + #clock-cells = <1>; + }; + }; + +}; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi new file mode 100644 index 00000000000..56bfac93d3f --- /dev/null +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -0,0 +1,390 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "skeleton.dtsi" +#include "rk3066a-clocks.dtsi" + +/ { + compatible = "rockchip,rk3066a"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x1>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@1013d000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1013d000 0x1000>, + <0x1013c100 0x0100>; + }; + + L2: l2-cache-controller@10138000 { + compatible = "arm,pl310-cache"; + reg = <0x10138000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + local-timer@1013c600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1013c600 0x20>; + interrupts = <GIC_PPI 13 0x304>; + clocks = <&dummy150m>; + }; + + timer@20038000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x20038000 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates1 0>, <&clk_gates7 7>; + clock-names = "timer", "pclk"; + }; + + timer@2003a000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x2003a000 0x100>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates1 1>, <&clk_gates7 8>; + clock-names = "timer", "pclk"; + }; + + timer@2000e000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x2000e000 0x100>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates1 2>, <&clk_gates7 9>; + clock-names = "timer", "pclk"; + }; + + pinctrl@20008000 { + compatible = "rockchip,rk3066a-pinctrl"; + reg = <0x20008000 0x150>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@20034000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20034000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 10>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@2003e000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003e000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 11>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 12>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@20084000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20084000 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 13>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio6@2000a000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2000a000 0x100>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 15>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_default: pcfg_pull_default { + bias-pull-pin-default; + }; + + pcfg_pull_none: pcfg_pull_none { + bias-disable; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + /* no rts / cts for uart2 */ + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + }; + + sd0 { + sd0_clk: sd0-clk { + rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd0_cmd: sd0-cmd { + rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd0_cd: sd0-cd { + rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd0_wp: sd0-wp { + rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd0_bus1: sd0-bus-width1 { + rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd0_bus4: sd0-bus-width4 { + rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + }; + + sd1 { + sd1_clk: sd1-clk { + rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd1_cmd: sd1-cmd { + rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd1_cd: sd1-cd { + rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd1_wp: sd1-wp { + rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd1_bus1: sd1-bus-width1 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd1_bus4: sd1-bus-width4 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + }; + }; + + uart0: serial@10124000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10124000 0x400>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 8>; + status = "disabled"; + }; + + uart1: serial@10126000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10126000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 10>; + status = "disabled"; + }; + + uart2: serial@20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 12>; + status = "disabled"; + }; + + uart3: serial@20068000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20068000 0x400>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 14>; + status = "disabled"; + }; + + dwmmc@10214000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10214000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clk_gates5 10>, <&clk_gates2 11>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + + dwmmc@10218000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10218000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clk_gates5 11>, <&clk_gates2 13>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts new file mode 100644 index 00000000000..8a1032c1ffc --- /dev/null +++ b/arch/arm/boot/dts/ste-u300.dts @@ -0,0 +1,473 @@ +/* + * Device Tree for the ST-Ericsson U300 Machine and SoC + */ + +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "ST-Ericsson U300"; + compatible = "stericsson,u300"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA0,115200n8 earlyprintk"; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory { + reg = <0x48000000 0x03c00000>; + }; + + s365 { + compatible = "stericsson,s365"; + vana15-supply = <&ab3100_ldo_d_reg>; + syscon = <&syscon>; + }; + + syscon: syscon@c0011000 { + compatible = "stericsson,u300-syscon", "syscon"; + reg = <0xc0011000 0x1000>; + clk32: app_32_clk@32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + pll13: pll13@13M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + /* Slow bridge clocks under PLL13 */ + slow_clk: slow_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <0>; + clocks = <&pll13>; + }; + uart0_clk: uart0_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <1>; + clocks = <&slow_clk>; + }; + gpio_clk: gpio_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <4>; + clocks = <&slow_clk>; + }; + rtc_clk: rtc_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <6>; + clocks = <&slow_clk>; + }; + apptimer_clk: app_tmr_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <7>; + clocks = <&slow_clk>; + }; + acc_tmr_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <8>; + clocks = <&slow_clk>; + }; + pll208: pll208@208M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <208000000>; + }; + app208: app_208_clk@208M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&pll208>; + }; + cpu_clk@208M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <3>; + clocks = <&app208>; + }; + app104: app_104_clk@104M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&pll208>; + }; + semi_clk@104M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <9>; + clocks = <&app104>; + }; + app52: app_52_clk@52M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <4>; + clock-mult = <1>; + clocks = <&pll208>; + }; + /* AHB subsystem clocks */ + ahb_clk: ahb_subsys_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <10>; + clocks = <&app52>; + }; + intcon_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <12>; + clocks = <&ahb_clk>; + }; + emif_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <5>; + clocks = <&ahb_clk>; + }; + dmac_clk: dmac_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <4>; + clocks = <&app52>; + }; + fsmc_clk: fsmc_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <6>; + clocks = <&app52>; + }; + xgam_clk: xgam_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <8>; + clocks = <&app52>; + }; + app26: app_26_clk@26M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&app52>; + }; + /* Fast bridge clocks */ + fast_clk: fast_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <0>; + clocks = <&app26>; + }; + i2c0_clk: i2c0_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <1>; + clocks = <&fast_clk>; + }; + i2c1_clk: i2c1_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <2>; + clocks = <&fast_clk>; + }; + mmc_pclk: mmc_p_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <5>; + clocks = <&fast_clk>; + }; + mmc_mclk: mmc_mclk { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-mclk"; + clocks = <&mmc_pclk>; + }; + spi_clk: spi_p_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <6>; + clocks = <&fast_clk>; + }; + }; + + timer: timer@c0014000 { + compatible = "stericsson,u300-apptimer"; + reg = <0xc0014000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <24 25 26 27>; + clocks = <&apptimer_clk>; + }; + + gpio: gpio@c0016000 { + compatible = "stericsson,gpio-coh901"; + reg = <0xc0016000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <0 1 2 18 21 22 23>; + clocks = <&gpio_clk>; + interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@c0011000 { + compatible = "stericsson,pinctrl-u300"; + reg = <0xc0011000 0x1000>; + }; + + watchdog: watchdog@c0012000 { + compatible = "stericsson,coh901327"; + reg = <0xc0012000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <3>; + clocks = <&clk32>; + }; + + rtc: rtc@c0017000 { + compatible = "stericsson,coh901331"; + reg = <0xc0017000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <10>; + clocks = <&rtc_clk>; + }; + + dmac: dma-controller@c00020000 { + compatible = "stericsson,coh901318"; + reg = <0xc0020000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <2>; + #dma-cells = <1>; + dma-channels = <40>; + clocks = <&dmac_clk>; + }; + + /* A NAND flash of 128 MiB */ + fsmc: flash@40000000 { + compatible = "stericsson,fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x9f800000 0x1000>, /* FSMC Register*/ + <0x80000000 0x4000>, /* NAND Base DATA */ + <0x80020000 0x4000>, /* NAND Base ADDR */ + <0x80010000 0x4000>; /* NAND Base CMD */ + reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; + nand-skip-bbtscan; + clocks = <&fsmc_clk>; + + partition@0 { + label = "boot records"; + reg = <0x0 0x20000>; + }; + partition@20000 { + label = "free"; + reg = <0x20000 0x7e0000>; + }; + partition@800000 { + label = "platform"; + reg = <0x800000 0xf800000>; + }; + }; + + i2c0: i2c@c0004000 { + compatible = "st,ddci2c"; + reg = <0xc0004000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <8>; + clocks = <&i2c0_clk>; + #address-cells = <1>; + #size-cells = <0>; + ab3100: ab3100@0x48 { + compatible = "stericsson,ab3100"; + reg = <0x48>; + interrupt-parent = <&vica>; + interrupts = <0>; /* EXT0 IRQ */ + ab3100-regulators { + compatible = "stericsson,ab3100-regulators"; + ab3100_ldo_a_reg: ab3100_ldo_a { + regulator-compatible = "ab3100_ldo_a"; + startup-delay-us = <200>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_c_reg: ab3100_ldo_c { + regulator-compatible = "ab3100_ldo_c"; + startup-delay-us = <200>; + }; + ab3100_ldo_d_reg: ab3100_ldo_d { + regulator-compatible = "ab3100_ldo_d"; + startup-delay-us = <200>; + }; + ab3100_ldo_e_reg: ab3100_ldo_e { + regulator-compatible = "ab3100_ldo_e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <200>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_f_reg: ab3100_ldo_f { + regulator-compatible = "ab3100_ldo_f"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + startup-delay-us = <600>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_g_reg: ab3100_ldo_g { + regulator-compatible = "ab3100_ldo_g"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2850000>; + startup-delay-us = <400>; + }; + ab3100_ldo_h_reg: ab3100_ldo_h { + regulator-compatible = "ab3100_ldo_h"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2750000>; + startup-delay-us = <200>; + }; + ab3100_ldo_k_reg: ab3100_ldo_k { + regulator-compatible = "ab3100_ldo_k"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2750000>; + startup-delay-us = <200>; + }; + ab3100_ext_reg: ab3100_ext { + regulator-compatible = "ab3100_ext"; + }; + ab3100_buck_reg: ab3100_buck { + regulator-compatible = "ab3100_buck"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <1000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + + i2c1: i2c@c0005000 { + compatible = "st,ddci2c"; + reg = <0xc0005000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <9>; + clocks = <&i2c1_clk>; + #address-cells = <1>; + #size-cells = <0>; + fwcam0: fwcam@0x10 { + reg = <0x10>; + }; + fwcam1: fwcam@0x5d { + reg = <0x5d>; + }; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vica: interrupt-controller@a0001000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xa0001000 0x20>; + }; + + vicb: interrupt-controller@a0002000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xa0002000 0x20>; + }; + + uart0: serial@c0013000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xc0013000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <22>; + clocks = <&uart0_clk>, <&uart0_clk>; + clock-names = "apb_pclk", "uart0_clk"; + dmas = <&dmac 17 &dmac 18>; + dma-names = "tx", "rx"; + }; + + uart1: serial@c0007000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xc0007000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <20>; + dmas = <&dmac 38 &dmac 39>; + dma-names = "tx", "rx"; + }; + + mmcsd: mmcsd@c0001000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0xc0001000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <6 7>; + clocks = <&mmc_pclk>, <&mmc_mclk>; + clock-names = "apb_pclk", "mclk"; + max-frequency = <24000000>; + bus-width = <4>; // SD-card slot + mmc-cap-mmc-highspeed; + mmc-cap-sd-highspeed; + cd-gpios = <&gpio 12 0x4>; + cd-inverted; + vmmc-supply = <&ab3100_ldo_g_reg>; + dmas = <&dmac 14>; + dma-names = "rx"; + }; + + spi: ssp@c0006000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xc0006000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <23>; + clocks = <&spi_clk>, <&spi_clk>; + clock-names = "apb_pclk", "spi_clk"; + dmas = <&dmac 27 &dmac 28>; + dma-names = "tx", "rx"; + num-cs = <3>; + #address-cells = <1>; + #size-cells = <0>; + spi-dummy@1 { + compatible = "arm,pl022-dummy"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 14fb2e609ba..0dbee2c2390 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -49,16 +49,18 @@ uart0: uart@e0000000 { compatible = "xlnx,xuartps"; + clocks = <&clkc 23>, <&clkc 40>; + clock-names = "ref_clk", "aper_clk"; reg = <0xE0000000 0x1000>; interrupts = <0 27 4>; - clocks = <&uart_clk 0>; }; uart1: uart@e0001000 { compatible = "xlnx,xuartps"; + clocks = <&clkc 24>, <&clkc 41>; + clock-names = "ref_clk", "aper_clk"; reg = <0xE0001000 0x1000>; interrupts = <0 50 4>; - clocks = <&uart_clk 1>; }; slcr: slcr@f8000000 { @@ -69,50 +71,21 @@ #address-cells = <1>; #size-cells = <0>; - ps_clk: ps_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - /* clock-frequency set in board-specific file */ - clock-output-names = "ps_clk"; - }; - armpll: armpll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x100 0x110>; - clock-output-names = "armpll"; - }; - ddrpll: ddrpll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x104 0x114>; - clock-output-names = "ddrpll"; - }; - iopll: iopll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x108 0x118>; - clock-output-names = "iopll"; - }; - uart_clk: uart_clk { - #clock-cells = <1>; - compatible = "xlnx,zynq-periph-clock"; - clocks = <&iopll &armpll &ddrpll>; - reg = <0x154>; - clock-output-names = "uart0_ref_clk", - "uart1_ref_clk"; - }; - cpu_clk: cpu_clk { + clkc: clkc { #clock-cells = <1>; - compatible = "xlnx,zynq-cpu-clock"; - clocks = <&iopll &armpll &ddrpll>; - reg = <0x120 0x1C4>; - clock-output-names = "cpu_6x4x", - "cpu_3x2x", - "cpu_2x", - "cpu_1x"; + compatible = "xlnx,ps7-clkc"; + ps-clk-frequency = <33333333>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; }; }; }; @@ -121,9 +94,8 @@ interrupt-parent = <&intc>; interrupts = < 0 10 4 0 11 4 0 12 4 >; compatible = "cdns,ttc"; + clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; - clocks = <&cpu_clk 3>; - clock-names = "cpu_1x"; clock-ranges; }; @@ -131,9 +103,8 @@ interrupt-parent = <&intc>; interrupts = < 0 37 4 0 38 4 0 39 4 >; compatible = "cdns,ttc"; + clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; - clocks = <&cpu_clk 3>; - clock-names = "cpu_1x"; clock-ranges; }; scutimer: scutimer@f8f00600 { @@ -141,7 +112,7 @@ interrupts = < 1 13 0x301 >; compatible = "arm,cortex-a9-twd-timer"; reg = < 0xf8f00600 0x20 >; - clocks = <&cpu_clk 1>; + clocks = <&clkc 4>; } ; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 86f44d5b026..e25a307438a 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -28,7 +28,3 @@ }; }; - -&ps_clk { - clock-frequency = <33333330>; -}; diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 9353184d730..c3a4e9ceba3 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -17,3 +17,6 @@ config SHARP_PARAM config SHARP_SCOOP bool + +config TI_PRIV_EDMA + bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 48434cbe3e8..8c60f473e97 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o AFLAGS_mcpm_head.o := -march=armv7-a AFLAGS_vlock.o := -march=armv7-a +obj-$(CONFIG_TI_PRIV_EDMA) += edma.o diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/common/edma.c index 45b7c71d9cc..a432e6c1dac 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/common/edma.c @@ -17,6 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/err.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> @@ -24,8 +25,15 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/edma.h> +#include <linux/err.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_dma.h> +#include <linux/of_irq.h> +#include <linux/pm_runtime.h> -#include <mach/edma.h> +#include <linux/platform_data/edma.h> /* Offsets matching "struct edmacc_param" */ #define PARM_OPT 0x00 @@ -494,26 +502,6 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data) return IRQ_HANDLED; } -/****************************************************************************** - * - * Transfer controller error interrupt handlers - * - *****************************************************************************/ - -#define tc_errs_handled false /* disabled as long as they're NOPs */ - -static irqreturn_t dma_tc0err_handler(int irq, void *data) -{ - dev_dbg(data, "dma_tc0err_handler\n"); - return IRQ_HANDLED; -} - -static irqreturn_t dma_tc1err_handler(int irq, void *data) -{ - dev_dbg(data, "dma_tc1err_handler\n"); - return IRQ_HANDLED; -} - static int reserve_contiguous_slots(int ctlr, unsigned int id, unsigned int num_slots, unsigned int start_slot) @@ -1388,32 +1376,236 @@ void edma_clear_event(unsigned channel) } EXPORT_SYMBOL(edma_clear_event); -/*-----------------------------------------------------------------------*/ +#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES) + +static int edma_of_read_u32_to_s16_array(const struct device_node *np, + const char *propname, s16 *out_values, + size_t sz) +{ + int ret; + + ret = of_property_read_u16_array(np, propname, out_values, sz); + if (ret) + return ret; + + /* Terminate it */ + *out_values++ = -1; + *out_values++ = -1; + + return 0; +} + +static int edma_xbar_event_map(struct device *dev, + struct device_node *node, + struct edma_soc_info *pdata, int len) +{ + int ret, i; + struct resource res; + void __iomem *xbar; + const s16 (*xbar_chans)[2]; + u32 shift, offset, mux; + + xbar_chans = devm_kzalloc(dev, + len/sizeof(s16) + 2*sizeof(s16), + GFP_KERNEL); + if (!xbar_chans) + return -ENOMEM; + + ret = of_address_to_resource(node, 1, &res); + if (ret) + return -EIO; + + xbar = devm_ioremap(dev, res.start, resource_size(&res)); + if (!xbar) + return -ENOMEM; + + ret = edma_of_read_u32_to_s16_array(node, + "ti,edma-xbar-event-map", + (s16 *)xbar_chans, + len/sizeof(u32)); + if (ret) + return -EIO; + + for (i = 0; xbar_chans[i][0] != -1; i++) { + shift = (xbar_chans[i][1] & 0x03) << 3; + offset = xbar_chans[i][1] & 0xfffffffc; + mux = readl(xbar + offset); + mux &= ~(0xff << shift); + mux |= xbar_chans[i][0] << shift; + writel(mux, (xbar + offset)); + } + + pdata->xbar_chans = xbar_chans; + + return 0; +} + +static int edma_of_parse_dt(struct device *dev, + struct device_node *node, + struct edma_soc_info *pdata) +{ + int ret = 0, i; + u32 value; + struct property *prop; + size_t sz; + struct edma_rsv_info *rsv_info; + s8 (*queue_tc_map)[2], (*queue_priority_map)[2]; + + memset(pdata, 0, sizeof(struct edma_soc_info)); + + ret = of_property_read_u32(node, "dma-channels", &value); + if (ret < 0) + return ret; + pdata->n_channel = value; + + ret = of_property_read_u32(node, "ti,edma-regions", &value); + if (ret < 0) + return ret; + pdata->n_region = value; + + ret = of_property_read_u32(node, "ti,edma-slots", &value); + if (ret < 0) + return ret; + pdata->n_slot = value; + + pdata->n_cc = 1; + + rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL); + if (!rsv_info) + return -ENOMEM; + pdata->rsv = rsv_info; + + queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL); + if (!queue_tc_map) + return -ENOMEM; + + for (i = 0; i < 3; i++) { + queue_tc_map[i][0] = i; + queue_tc_map[i][1] = i; + } + queue_tc_map[i][0] = -1; + queue_tc_map[i][1] = -1; + + pdata->queue_tc_mapping = queue_tc_map; + + queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL); + if (!queue_priority_map) + return -ENOMEM; + + for (i = 0; i < 3; i++) { + queue_priority_map[i][0] = i; + queue_priority_map[i][1] = i; + } + queue_priority_map[i][0] = -1; + queue_priority_map[i][1] = -1; + + pdata->queue_priority_mapping = queue_priority_map; + + pdata->default_queue = 0; + + prop = of_find_property(node, "ti,edma-xbar-event-map", &sz); + if (prop) + ret = edma_xbar_event_map(dev, node, pdata, sz); + + return ret; +} + +static struct of_dma_filter_info edma_filter_info = { + .filter_fn = edma_filter_fn, +}; + +static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev, + struct device_node *node) +{ + struct edma_soc_info *info; + int ret; + + info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL); + if (!info) + return ERR_PTR(-ENOMEM); -static int __init edma_probe(struct platform_device *pdev) + ret = edma_of_parse_dt(dev, node, info); + if (ret) + return ERR_PTR(ret); + + dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap); + of_dma_controller_register(dev->of_node, of_dma_simple_xlate, + &edma_filter_info); + + return info; +} +#else +static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev, + struct device_node *node) +{ + return ERR_PTR(-ENOSYS); +} +#endif + +static int edma_probe(struct platform_device *pdev) { struct edma_soc_info **info = pdev->dev.platform_data; - const s8 (*queue_priority_mapping)[2]; - const s8 (*queue_tc_mapping)[2]; + struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL}; + s8 (*queue_priority_mapping)[2]; + s8 (*queue_tc_mapping)[2]; int i, j, off, ln, found = 0; int status = -1; const s16 (*rsv_chans)[2]; const s16 (*rsv_slots)[2]; + const s16 (*xbar_chans)[2]; int irq[EDMA_MAX_CC] = {0, 0}; int err_irq[EDMA_MAX_CC] = {0, 0}; struct resource *r[EDMA_MAX_CC] = {NULL}; - resource_size_t len[EDMA_MAX_CC]; + struct resource res[EDMA_MAX_CC]; char res_name[10]; char irq_name[10]; + struct device_node *node = pdev->dev.of_node; + struct device *dev = &pdev->dev; + int ret; + + if (node) { + /* Check if this is a second instance registered */ + if (arch_num_cc) { + dev_err(dev, "only one EDMA instance is supported via DT\n"); + return -ENODEV; + } + + ninfo[0] = edma_setup_info_from_dt(dev, node); + if (IS_ERR(ninfo[0])) { + dev_err(dev, "failed to get DT data\n"); + return PTR_ERR(ninfo[0]); + } + + info = ninfo; + } if (!info) return -ENODEV; + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "pm_runtime_get_sync() failed\n"); + return ret; + } + for (j = 0; j < EDMA_MAX_CC; j++) { - sprintf(res_name, "edma_cc%d", j); - r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM, + if (!info[j]) { + if (!found) + return -ENODEV; + break; + } + if (node) { + ret = of_address_to_resource(node, j, &res[j]); + if (!ret) + r[j] = &res[j]; + } else { + sprintf(res_name, "edma_cc%d", j); + r[j] = platform_get_resource_byname(pdev, + IORESOURCE_MEM, res_name); - if (!r[j] || !info[j]) { + } + if (!r[j]) { if (found) break; else @@ -1422,26 +1614,14 @@ static int __init edma_probe(struct platform_device *pdev) found = 1; } - len[j] = resource_size(r[j]); - - r[j] = request_mem_region(r[j]->start, len[j], - dev_name(&pdev->dev)); - if (!r[j]) { - status = -EBUSY; - goto fail1; - } - - edmacc_regs_base[j] = ioremap(r[j]->start, len[j]); - if (!edmacc_regs_base[j]) { - status = -EBUSY; - goto fail1; - } + edmacc_regs_base[j] = devm_ioremap_resource(&pdev->dev, r[j]); + if (IS_ERR(edmacc_regs_base[j])) + return PTR_ERR(edmacc_regs_base[j]); - edma_cc[j] = kzalloc(sizeof(struct edma), GFP_KERNEL); - if (!edma_cc[j]) { - status = -ENOMEM; - goto fail1; - } + edma_cc[j] = devm_kzalloc(&pdev->dev, sizeof(struct edma), + GFP_KERNEL); + if (!edma_cc[j]) + return -ENOMEM; edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel, EDMA_MAX_DMACH); @@ -1472,7 +1652,7 @@ static int __init edma_probe(struct platform_device *pdev) off = rsv_chans[i][0]; ln = rsv_chans[i][1]; clear_bits(off, ln, - edma_cc[j]->edma_unused); + edma_cc[j]->edma_unused); } } @@ -1488,26 +1668,48 @@ static int __init edma_probe(struct platform_device *pdev) } } - sprintf(irq_name, "edma%d", j); - irq[j] = platform_get_irq_byname(pdev, irq_name); + /* Clear the xbar mapped channels in unused list */ + xbar_chans = info[j]->xbar_chans; + if (xbar_chans) { + for (i = 0; xbar_chans[i][1] != -1; i++) { + off = xbar_chans[i][1]; + clear_bits(off, 1, + edma_cc[j]->edma_unused); + } + } + + if (node) { + irq[j] = irq_of_parse_and_map(node, 0); + } else { + sprintf(irq_name, "edma%d", j); + irq[j] = platform_get_irq_byname(pdev, irq_name); + } edma_cc[j]->irq_res_start = irq[j]; - status = request_irq(irq[j], dma_irq_handler, 0, "edma", - &pdev->dev); + status = devm_request_irq(&pdev->dev, irq[j], + dma_irq_handler, 0, "edma", + &pdev->dev); if (status < 0) { - dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + dev_dbg(&pdev->dev, + "devm_request_irq %d failed --> %d\n", irq[j], status); - goto fail; + return status; } - sprintf(irq_name, "edma%d_err", j); - err_irq[j] = platform_get_irq_byname(pdev, irq_name); + if (node) { + err_irq[j] = irq_of_parse_and_map(node, 2); + } else { + sprintf(irq_name, "edma%d_err", j); + err_irq[j] = platform_get_irq_byname(pdev, irq_name); + } edma_cc[j]->irq_res_end = err_irq[j]; - status = request_irq(err_irq[j], dma_ccerr_handler, 0, - "edma_error", &pdev->dev); + status = devm_request_irq(&pdev->dev, err_irq[j], + dma_ccerr_handler, 0, + "edma_error", &pdev->dev); if (status < 0) { - dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + dev_dbg(&pdev->dev, + "devm_request_irq %d failed --> %d\n", err_irq[j], status); - goto fail; + return status; } for (i = 0; i < edma_cc[j]->num_channels; i++) @@ -1541,46 +1743,20 @@ static int __init edma_probe(struct platform_device *pdev) arch_num_cc++; } - if (tc_errs_handled) { - status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0, - "edma_tc0", &pdev->dev); - if (status < 0) { - dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", - IRQ_TCERRINT0, status); - return status; - } - status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0, - "edma_tc1", &pdev->dev); - if (status < 0) { - dev_dbg(&pdev->dev, "request_irq %d --> %d\n", - IRQ_TCERRINT, status); - return status; - } - } - return 0; - -fail: - for (i = 0; i < EDMA_MAX_CC; i++) { - if (err_irq[i]) - free_irq(err_irq[i], &pdev->dev); - if (irq[i]) - free_irq(irq[i], &pdev->dev); - } -fail1: - for (i = 0; i < EDMA_MAX_CC; i++) { - if (r[i]) - release_mem_region(r[i]->start, len[i]); - if (edmacc_regs_base[i]) - iounmap(edmacc_regs_base[i]); - kfree(edma_cc[i]); - } - return status; } +static const struct of_device_id edma_of_ids[] = { + { .compatible = "ti,edma3", }, + {} +}; static struct platform_driver edma_driver = { - .driver.name = "edma", + .driver = { + .name = "edma", + .of_match_table = edma_of_ids, + }, + .probe = edma_probe, }; static int __init edma_init(void) diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig deleted file mode 100644 index 66894f736d0..00000000000 --- a/arch/arm/configs/ap4evb_defconfig +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y -CONFIG_ARCH_SH7372=y -CONFIG_MACH_AP4EVB=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200" -CONFIG_KEXEC=y -CONFIG_PM=y -# CONFIG_SUSPEND is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/bonito_defconfig b/arch/arm/configs/bonito_defconfig deleted file mode 100644 index 54571082d92..00000000000 --- a/arch/arm/configs/bonito_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y -CONFIG_ARCH_R8A7740=y -CONFIG_MACH_BONITO=y -# CONFIG_SH_TIMER_TMU is not set -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_FORCE_MAX_ZONEORDER=12 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC5,115200 earlyprintk=sh-sci.5,115200 ignore_loglevel" -CONFIG_KEXEC=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_SUSPEND is not set -CONFIG_PM_RUNTIME=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_ARM_INTEGRATOR=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=9 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_SH_MOBILE=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_UIO=y -CONFIG_UIO_PDRV=y -CONFIG_UIO_PDRV_GENIRQ=y -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig index 1cd94c36321..9e8c8316d6b 100644 --- a/arch/arm/configs/clps711x_defconfig +++ b/arch/arm/configs/clps711x_defconfig @@ -31,21 +31,18 @@ CONFIG_EP7211_DONGLE=y # CONFIG_WIRELESS is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_AUTCPU12=y CONFIG_MTD_PLATRAM=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPIO=y CONFIG_NETDEVICES=y # CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set CONFIG_CS89x0=y CONFIG_CS89x0_PLATFORM=y # CONFIG_NET_VENDOR_FARADAY is not set @@ -63,7 +60,11 @@ CONFIG_CS89x0_PLATFORM=y # CONFIG_VT is not set CONFIG_SERIAL_CLPS711X_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_GPIO=y CONFIG_SPI=y +CONFIG_SPI_CLPS711X=y +CONFIG_GPIO_CLPS711X=y CONFIG_GPIO_GENERIC_PLATFORM=y # CONFIG_HWMON is not set CONFIG_FB=y @@ -87,4 +88,3 @@ CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 227abf9cc60..ad7dfbbafa4 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -50,6 +50,7 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_CROS_EC=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_CYAPA=y @@ -104,6 +105,8 @@ CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_DW=y CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_EXYNOS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_S3C=y CONFIG_COMMON_CLK_MAX77686=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 6ec010f248b..06686e7303a 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -37,6 +37,8 @@ CONFIG_MACH_IMX51_DT=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +CONFIG_SOC_VF610=y CONFIG_MXC_PWM=y CONFIG_SMP=y CONFIG_VMSPLIT_2G=y @@ -47,6 +49,7 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_VFP=y CONFIG_NEON=y CONFIG_BINFMT_MISC=m +CONFIG_PM_RUNTIME=y CONFIG_PM_DEBUG=y CONFIG_PM_TEST_SUSPEND=y CONFIG_NET=y @@ -170,6 +173,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONTS=y @@ -182,6 +186,7 @@ CONFIG_SND_SOC=y CONFIG_SND_IMX_SOC=y CONFIG_SND_SOC_PHYCORE_AC97=y CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_SND_SOC_IMX_WM8962=y CONFIG_SND_SOC_IMX_SGTL5000=y CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB=y @@ -208,10 +213,15 @@ CONFIG_IMX_SDMA=y CONFIG_MXS_DMA=y CONFIG_STAGING=y CONFIG_DRM_IMX=y +CONFIG_DRM_IMX_TVE=y +CONFIG_DRM_IMX_FB_HELPER=y +CONFIG_DRM_IMX_PARALLEL_DISPLAY=y CONFIG_DRM_IMX_IPUV3_CORE=y CONFIG_DRM_IMX_IPUV3=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_PWM=y +CONFIG_PWM_IMX=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig new file mode 100644 index 00000000000..62e968cac9d --- /dev/null +++ b/arch/arm/configs/keystone_defconfig @@ -0,0 +1,157 @@ +# CONFIG_SWAP is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_ELF_CORE is not set +# CONFIG_BASE_FULL is not set +CONFIG_EMBEDDED=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_ARM_LPAE=y +CONFIG_SMP=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_SUSPEND is not set +CONFIG_PM_RUNTIME=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_STATISTICS=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE_DEMUX=y +CONFIG_NET_IPGRE=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V2=y +CONFIG_INET_AH=y +CONFIG_INET_IPCOMP=y +CONFIG_IPV6=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y +CONFIG_NETFILTER_XT_TARGET_CONNMARK=y +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_MATCH_COMMENT=y +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y +CONFIG_NETFILTER_XT_MATCH_CONNMARK=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_CPU=y +CONFIG_NETFILTER_XT_MATCH_IPRANGE=y +CONFIG_NETFILTER_XT_MATCH_LENGTH=y +CONFIG_NETFILTER_XT_MATCH_MAC=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y +CONFIG_NETFILTER_XT_MATCH_STATE=y +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_AH=y +CONFIG_IP_NF_MATCH_ECN=y +CONFIG_IP_NF_MATCH_TTL=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_IP_NF_MANGLE=y +CONFIG_IP_NF_TARGET_CLUSTERIP=y +CONFIG_IP_NF_TARGET_ECN=y +CONFIG_IP_NF_TARGET_TTL=y +CONFIG_IP_NF_RAW=y +CONFIG_IP_NF_ARPTABLES=y +CONFIG_IP_NF_ARPFILTER=y +CONFIG_IP_NF_ARP_MANGLE=y +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP_SCTP=y +CONFIG_VLAN_8021Q=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_CMA=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_UBI=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_EEPROM_AT24=y +CONFIG_NETDEVICES=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_SPIDEV=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_USB_SUPPORT is not set +CONFIG_DMADEVICES=y +CONFIG_COMMON_CLK_DEBUG=y +CONFIG_MEMORY=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_UBIFS_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y +CONFIG_CRYPTO_USER=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_XCBC=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_USER_API_HASH=y +CONFIG_CRYPTO_USER_API_SKCIPHER=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index a1d8252e9ec..0f2aa61911a 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -31,6 +30,7 @@ CONFIG_MACH_T5325=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y CONFIG_MACH_CLOUDBOX_DT=y +CONFIG_MACH_DB88F628X_BP_DT=y CONFIG_MACH_DLINK_KIRKWOOD_DT=y CONFIG_MACH_DOCKSTAR_DT=y CONFIG_MACH_DREAMPLUG_DT=y @@ -50,14 +50,19 @@ CONFIG_MACH_NETSPACE_V2_DT=y CONFIG_MACH_NSA310_DT=y CONFIG_MACH_OPENBLOCKS_A6_DT=y CONFIG_MACH_READYNAS_DT=y +CONFIG_MACH_SHEEVAPLUG_DT=y CONFIG_MACH_TOPKICK_DT=y CONFIG_MACH_TS219_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set +CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_NET=y CONFIG_PACKET=y @@ -68,14 +73,12 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set -CONFIG_NET_DSA=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -140,6 +143,7 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_PRINTER=m diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 2e67a272df7..4aa64010661 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -31,10 +31,12 @@ CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y CONFIG_SATA_AHCI_PLATFORM=y CONFIG_NETDEVICES=y +CONFIG_SUN4I_EMAC=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_SERIO_AMBAKMI=y +CONFIG_MDIO_SUN4I=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index f3e8ae001ff..731814e2c18 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -13,6 +13,8 @@ CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_XP=y # CONFIG_CACHE_L2X0 is not set # CONFIG_SWP_EMULATE is not set +CONFIG_PCI=y +CONFIG_PCI_MVEBU=y CONFIG_SMP=y CONFIG_AEABI=y CONFIG_HIGHMEM=y @@ -60,6 +62,8 @@ CONFIG_USB_SUPPORT=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_STORAGE=y +CONFIG_USB_XHCI_HCD=y CONFIG_MMC=y CONFIG_MMC_MVSDIO=y CONFIG_NEW_LEDS=y @@ -96,5 +100,3 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 374000ec4e4..fd81a1b99cc 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,8 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y # CONFIG_AIO is not set @@ -11,12 +12,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_U300=y -CONFIG_MACH_U300=y -CONFIG_MACH_U300_BS335=y CONFIG_MACH_U300_SPIDUMMY=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -44,14 +42,15 @@ CONFIG_I2C=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_CLKGATE=y +CONFIG_MMC_UNSAFE_RESUME=y +# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set @@ -70,4 +69,3 @@ CONFIG_DEBUG_FS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 05ee9eebad6..a5fef710af3 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -136,7 +136,11 @@ * assumes FIQs are enabled, and that the processor is in SVC mode. */ .macro save_and_disable_irqs, oldcpsr +#ifdef CONFIG_CPU_V7M + mrs \oldcpsr, primask +#else mrs \oldcpsr, cpsr +#endif disable_irq .endm @@ -150,7 +154,11 @@ * guarantee that this will preserve the flags. */ .macro restore_irqs_notrace, oldcpsr +#ifdef CONFIG_CPU_V7M + msr primask, \oldcpsr +#else msr cpsr_c, \oldcpsr +#endif .endm .macro restore_irqs, oldcpsr @@ -229,7 +237,14 @@ #endif .endm -#ifdef CONFIG_THUMB2_KERNEL +#if defined(CONFIG_CPU_V7M) + /* + * setmode is used to assert to be in svc mode during boot. For v7-M + * this is done in __v7m_setup, so setmode can be empty here. + */ + .macro setmode, mode, reg + .endm +#elif defined(CONFIG_THUMB2_KERNEL) .macro setmode, mode, reg mov \reg, #\mode msr cpsr_c, \reg diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index 1f3262e99d8..cedd3721318 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -61,6 +61,20 @@ static inline void set_cr(unsigned int val) isb(); } +static inline unsigned int get_auxcr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 1 @ get AUXCR" : "=r" (val)); + return val; +} + +static inline void set_auxcr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 1 @ set AUXCR" + : : "r" (val)); + isb(); +} + #ifndef CONFIG_SMP extern void adjust_cr(unsigned long mask, unsigned long set); #endif diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index dba62cb1ad0..d7deb62554c 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -10,6 +10,22 @@ #define CPUID_TLBTYPE 3 #define CPUID_MPIDR 5 +#ifdef CONFIG_CPU_V7M +#define CPUID_EXT_PFR0 0x40 +#define CPUID_EXT_PFR1 0x44 +#define CPUID_EXT_DFR0 0x48 +#define CPUID_EXT_AFR0 0x4c +#define CPUID_EXT_MMFR0 0x50 +#define CPUID_EXT_MMFR1 0x54 +#define CPUID_EXT_MMFR2 0x58 +#define CPUID_EXT_MMFR3 0x5c +#define CPUID_EXT_ISAR0 0x60 +#define CPUID_EXT_ISAR1 0x64 +#define CPUID_EXT_ISAR2 0x68 +#define CPUID_EXT_ISAR3 0x6c +#define CPUID_EXT_ISAR4 0x70 +#define CPUID_EXT_ISAR5 0x74 +#else #define CPUID_EXT_PFR0 "c1, 0" #define CPUID_EXT_PFR1 "c1, 1" #define CPUID_EXT_DFR0 "c1, 2" @@ -24,6 +40,7 @@ #define CPUID_EXT_ISAR3 "c2, 3" #define CPUID_EXT_ISAR4 "c2, 4" #define CPUID_EXT_ISAR5 "c2, 5" +#endif #define MPIDR_SMP_BITMASK (0x3 << 30) #define MPIDR_SMP_VALUE (0x2 << 30) @@ -81,7 +98,23 @@ extern unsigned int processor_id; __val; \ }) -#else /* ifdef CONFIG_CPU_CP15 */ +#elif defined(CONFIG_CPU_V7M) + +#include <asm/io.h> +#include <asm/v7m.h> + +#define read_cpuid(reg) \ + ({ \ + WARN_ON_ONCE(1); \ + 0; \ + }) + +static inline unsigned int __attribute_const__ read_cpuid_ext(unsigned offset) +{ + return readl(BASEADDR_V7M_SCB + offset); +} + +#else /* ifdef CONFIG_CPU_CP15 / elif defined (CONFIG_CPU_V7M) */ /* * read_cpuid and read_cpuid_ext should only ever be called on machines that @@ -108,7 +141,14 @@ static inline unsigned int __attribute_const__ read_cpuid_id(void) return read_cpuid(CPUID_ID); } -#else /* ifdef CONFIG_CPU_CP15 */ +#elif defined(CONFIG_CPU_V7M) + +static inline unsigned int __attribute_const__ read_cpuid_id(void) +{ + return readl(BASEADDR_V7M_SCB + V7M_SCB_CPUID); +} + +#else /* ifdef CONFIG_CPU_CP15 / elif defined(CONFIG_CPU_V7M) */ static inline unsigned int __attribute_const__ read_cpuid_id(void) { diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index ea289e1435e..c81adc08b3f 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -117,10 +117,37 @@ # endif #endif +#if defined(CONFIG_CPU_V7M) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE nop +# endif +#endif + #if !defined(_CACHE) && !defined(MULTI_CACHE) #error Unknown cache maintenance model #endif +#ifndef __ASSEMBLER__ +extern inline void nop_flush_icache_all(void) { } +extern inline void nop_flush_kern_cache_all(void) { } +extern inline void nop_flush_kern_cache_louis(void) { } +extern inline void nop_flush_user_cache_all(void) { } +extern inline void nop_flush_user_cache_range(unsigned long a, + unsigned long b, unsigned int c) { } + +extern inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { } +extern inline int nop_coherent_user_range(unsigned long a, + unsigned long b) { return 0; } +extern inline void nop_flush_kern_dcache_area(void *a, size_t s) { } + +extern inline void nop_dma_flush_range(const void *a, const void *b) { } + +extern inline void nop_dma_map_area(const void *s, size_t l, int f) { } +extern inline void nop_dma_unmap_area(const void *s, size_t l, int f) { } +#endif + #ifndef MULTI_CACHE #define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all) #define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h index b6e9f2c108b..6b70f1b46a6 100644 --- a/arch/arm/include/asm/glue-df.h +++ b/arch/arm/include/asm/glue-df.h @@ -95,6 +95,14 @@ # endif #endif +#ifdef CONFIG_CPU_ABRT_NOMMU +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER nommu_early_abort +# endif +#endif + #ifndef CPU_DABORT_HANDLER #error Unknown data abort handler type #endif diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h index 8017e94acc5..e6168c0c18e 100644 --- a/arch/arm/include/asm/glue-proc.h +++ b/arch/arm/include/asm/glue-proc.h @@ -239,6 +239,15 @@ # endif #endif +#ifdef CONFIG_CPU_V7M +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_v7m +# endif +#endif + #ifndef MULTI_CPU #define cpu_proc_init __glue(CPU_NAME,_proc_init) #define cpu_proc_fin __glue(CPU_NAME,_proc_fin) diff --git a/arch/arm/include/asm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h deleted file mode 100644 index 2811c7e2cfd..00000000000 --- a/arch/arm/include/asm/hardware/pci_v3.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * arch/arm/include/asm/hardware/pci_v3.h - * - * Internal header file PCI V3 chip - * - * Copyright (C) ARM Limited - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef ASM_ARM_HARDWARE_PCI_V3_H -#define ASM_ARM_HARDWARE_PCI_V3_H - -/* ------------------------------------------------------------------------------- - * V3 Local Bus to PCI Bridge definitions - * ------------------------------------------------------------------------------- - * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04 - * All V3 register names are prefaced by V3_ to avoid clashing with any other - * PCI definitions. Their names match the user's manual. - * - * I'm assuming that I20 is disabled. - * - */ -#define V3_PCI_VENDOR 0x00000000 -#define V3_PCI_DEVICE 0x00000002 -#define V3_PCI_CMD 0x00000004 -#define V3_PCI_STAT 0x00000006 -#define V3_PCI_CC_REV 0x00000008 -#define V3_PCI_HDR_CFG 0x0000000C -#define V3_PCI_IO_BASE 0x00000010 -#define V3_PCI_BASE0 0x00000014 -#define V3_PCI_BASE1 0x00000018 -#define V3_PCI_SUB_VENDOR 0x0000002C -#define V3_PCI_SUB_ID 0x0000002E -#define V3_PCI_ROM 0x00000030 -#define V3_PCI_BPARAM 0x0000003C -#define V3_PCI_MAP0 0x00000040 -#define V3_PCI_MAP1 0x00000044 -#define V3_PCI_INT_STAT 0x00000048 -#define V3_PCI_INT_CFG 0x0000004C -#define V3_LB_BASE0 0x00000054 -#define V3_LB_BASE1 0x00000058 -#define V3_LB_MAP0 0x0000005E -#define V3_LB_MAP1 0x00000062 -#define V3_LB_BASE2 0x00000064 -#define V3_LB_MAP2 0x00000066 -#define V3_LB_SIZE 0x00000068 -#define V3_LB_IO_BASE 0x0000006E -#define V3_FIFO_CFG 0x00000070 -#define V3_FIFO_PRIORITY 0x00000072 -#define V3_FIFO_STAT 0x00000074 -#define V3_LB_ISTAT 0x00000076 -#define V3_LB_IMASK 0x00000077 -#define V3_SYSTEM 0x00000078 -#define V3_LB_CFG 0x0000007A -#define V3_PCI_CFG 0x0000007C -#define V3_DMA_PCI_ADR0 0x00000080 -#define V3_DMA_PCI_ADR1 0x00000090 -#define V3_DMA_LOCAL_ADR0 0x00000084 -#define V3_DMA_LOCAL_ADR1 0x00000094 -#define V3_DMA_LENGTH0 0x00000088 -#define V3_DMA_LENGTH1 0x00000098 -#define V3_DMA_CSR0 0x0000008B -#define V3_DMA_CSR1 0x0000009B -#define V3_DMA_CTLB_ADR0 0x0000008C -#define V3_DMA_CTLB_ADR1 0x0000009C -#define V3_DMA_DELAY 0x000000E0 -#define V3_MAIL_DATA 0x000000C0 -#define V3_PCI_MAIL_IEWR 0x000000D0 -#define V3_PCI_MAIL_IERD 0x000000D2 -#define V3_LB_MAIL_IEWR 0x000000D4 -#define V3_LB_MAIL_IERD 0x000000D6 -#define V3_MAIL_WR_STAT 0x000000D8 -#define V3_MAIL_RD_STAT 0x000000DA -#define V3_QBA_MAP 0x000000DC - -/* PCI COMMAND REGISTER bits - */ -#define V3_COMMAND_M_FBB_EN (1 << 9) -#define V3_COMMAND_M_SERR_EN (1 << 8) -#define V3_COMMAND_M_PAR_EN (1 << 6) -#define V3_COMMAND_M_MASTER_EN (1 << 2) -#define V3_COMMAND_M_MEM_EN (1 << 1) -#define V3_COMMAND_M_IO_EN (1 << 0) - -/* SYSTEM REGISTER bits - */ -#define V3_SYSTEM_M_RST_OUT (1 << 15) -#define V3_SYSTEM_M_LOCK (1 << 14) - -/* PCI_CFG bits - */ -#define V3_PCI_CFG_M_I2O_EN (1 << 15) -#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14) -#define V3_PCI_CFG_M_IO_DIS (1 << 13) -#define V3_PCI_CFG_M_EN3V (1 << 12) -#define V3_PCI_CFG_M_RETRY_EN (1 << 10) -#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) -#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) - -/* PCI_BASE register bits (PCI -> Local Bus) - */ -#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000 -#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00 -#define V3_PCI_BASE_M_PREFETCH (1 << 3) -#define V3_PCI_BASE_M_TYPE (3 << 1) -#define V3_PCI_BASE_M_IO (1 << 0) - -/* PCI MAP register bits (PCI -> Local bus) - */ -#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 -#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) -#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) -#define V3_PCI_MAP_M_SWAP (3 << 8) -#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 -#define V3_PCI_MAP_M_REG_EN (1 << 1) -#define V3_PCI_MAP_M_ENABLE (1 << 0) - -/* - * LB_BASE0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_BASE_ADR_BASE 0xfff00000 -#define V3_LB_BASE_SWAP (3 << 8) -#define V3_LB_BASE_ADR_SIZE (15 << 4) -#define V3_LB_BASE_PREFETCH (1 << 3) -#define V3_LB_BASE_ENABLE (1 << 0) - -#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) -#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) -#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) -#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) -#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) -#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) -#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) -#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) -#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) -#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) -#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) -#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) - -#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) - -/* - * LB_MAP0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_MAP_MAP_ADR 0xfff0 -#define V3_LB_MAP_TYPE (7 << 1) -#define V3_LB_MAP_AD_LOW_EN (1 << 0) - -#define V3_LB_MAP_TYPE_IACK (0 << 1) -#define V3_LB_MAP_TYPE_IO (1 << 1) -#define V3_LB_MAP_TYPE_MEM (3 << 1) -#define V3_LB_MAP_TYPE_CONFIG (5 << 1) -#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) - -#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) - -/* - * LB_BASE2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_BASE2_ADR_BASE 0xff00 -#define V3_LB_BASE2_SWAP (3 << 6) -#define V3_LB_BASE2_ENABLE (1 << 0) - -#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) - -/* - * LB_MAP2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_MAP2_MAP_ADR 0xff00 - -#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) - -#endif diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h index 1e6cca55c75..3b763d6652a 100644 --- a/arch/arm/include/asm/irqflags.h +++ b/arch/arm/include/asm/irqflags.h @@ -8,6 +8,16 @@ /* * CPU interrupt mask handling. */ +#ifdef CONFIG_CPU_V7M +#define IRQMASK_REG_NAME_R "primask" +#define IRQMASK_REG_NAME_W "primask" +#define IRQMASK_I_BIT 1 +#else +#define IRQMASK_REG_NAME_R "cpsr" +#define IRQMASK_REG_NAME_W "cpsr_c" +#define IRQMASK_I_BIT PSR_I_BIT +#endif + #if __LINUX_ARM_ARCH__ >= 6 static inline unsigned long arch_local_irq_save(void) @@ -15,7 +25,7 @@ static inline unsigned long arch_local_irq_save(void) unsigned long flags; asm volatile( - " mrs %0, cpsr @ arch_local_irq_save\n" + " mrs %0, " IRQMASK_REG_NAME_R " @ arch_local_irq_save\n" " cpsid i" : "=r" (flags) : : "memory", "cc"); return flags; @@ -129,7 +139,7 @@ static inline unsigned long arch_local_save_flags(void) { unsigned long flags; asm volatile( - " mrs %0, cpsr @ local_save_flags" + " mrs %0, " IRQMASK_REG_NAME_R " @ local_save_flags" : "=r" (flags) : : "memory", "cc"); return flags; } @@ -140,7 +150,7 @@ static inline unsigned long arch_local_save_flags(void) static inline void arch_local_irq_restore(unsigned long flags) { asm volatile( - " msr cpsr_c, %0 @ local_irq_restore" + " msr " IRQMASK_REG_NAME_W ", %0 @ local_irq_restore" : : "r" (flags) : "memory", "cc"); @@ -148,8 +158,8 @@ static inline void arch_local_irq_restore(unsigned long flags) static inline int arch_irqs_disabled_flags(unsigned long flags) { - return flags & PSR_I_BIT; + return flags & IRQMASK_I_BIT; } -#endif -#endif +#endif /* ifdef __KERNEL__ */ +#endif /* ifndef __ASM_ARM_IRQFLAGS_H */ diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 308ad7d6f98..75bf07910b8 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <linux/types.h> + #ifndef __ASSEMBLY__ struct tag; @@ -16,8 +18,10 @@ struct pt_regs; struct smp_operations; #ifdef CONFIG_SMP #define smp_ops(ops) (&(ops)) +#define smp_init_ops(ops) (&(ops)) #else #define smp_ops(ops) (struct smp_operations *)NULL +#define smp_init_ops(ops) (bool (*)(void))NULL #endif struct machine_desc { @@ -41,6 +45,7 @@ struct machine_desc { unsigned char reserve_lp2 :1; /* never has lp2 */ char restart_mode; /* default restart mode */ struct smp_operations *smp; /* SMP operations */ + bool (*smp_init)(void); void (*fixup)(struct tag *, char **, struct meminfo *); void (*reserve)(void);/* reserve mem blocks */ diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 7d2c3c84380..a1c90d7feb0 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -16,6 +16,7 @@ struct pci_sys_data; struct pci_ops; struct pci_bus; +struct device; struct hw_pci { #ifdef CONFIG_PCI_DOMAINS @@ -68,7 +69,16 @@ struct pci_sys_data { /* * Call this with your hw_pci struct to initialise the PCI system. */ -void pci_common_init(struct hw_pci *); +void pci_common_init_dev(struct device *, struct hw_pci *); + +/* + * Compatibility wrapper for older platforms that do not care about + * passing the parent device. + */ +static inline void pci_common_init(struct hw_pci *hw) +{ + pci_common_init_dev(NULL, hw); +} /* * Setup early fixed I/O mapping. @@ -96,9 +106,4 @@ extern struct pci_ops via82c505_ops; extern int via82c505_setup(int nr, struct pci_sys_data *); extern void via82c505_init(void *sysdata); -extern struct pci_ops pci_v3_ops; -extern int pci_v3_setup(int nr, struct pci_sys_data *); -extern void pci_v3_preinit(void); -extern void pci_v3_postinit(void); - #endif /* __ASM_MACH_PCI_H */ diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h index ce0dbe7c162..c4ae171850f 100644 --- a/arch/arm/include/asm/psci.h +++ b/arch/arm/include/asm/psci.h @@ -32,5 +32,14 @@ struct psci_operations { }; extern struct psci_operations psci_ops; +extern struct smp_operations psci_smp_ops; + +#ifdef CONFIG_ARM_PSCI +void psci_init(void); +bool psci_smp_available(void); +#else +static inline void psci_init(void) { } +static inline bool psci_smp_available(void) { return false; } +#endif #endif /* __ASM_ARM_PSCI_H */ diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 3d52ee1bfb3..04c99f36ff7 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -45,6 +45,7 @@ struct pt_regs { */ static inline int valid_user_regs(struct pt_regs *regs) { +#ifndef CONFIG_CPU_V7M unsigned long mode = regs->ARM_cpsr & MODE_MASK; /* @@ -67,6 +68,9 @@ static inline int valid_user_regs(struct pt_regs *regs) regs->ARM_cpsr |= USR_MODE; return 0; +#else /* ifndef CONFIG_CPU_V7M */ + return 1; +#endif } static inline long regs_return_value(struct pt_regs *regs) diff --git a/arch/arm/include/asm/system_info.h b/arch/arm/include/asm/system_info.h index dfd386d0c02..720ea0320a6 100644 --- a/arch/arm/include/asm/system_info.h +++ b/arch/arm/include/asm/system_info.h @@ -11,6 +11,7 @@ #define CPU_ARCH_ARMv5TEJ 7 #define CPU_ARCH_ARMv6 8 #define CPU_ARCH_ARMv7 9 +#define CPU_ARCH_ARMv7M 10 #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h new file mode 100644 index 00000000000..fa88d09fa3d --- /dev/null +++ b/arch/arm/include/asm/v7m.h @@ -0,0 +1,44 @@ +/* + * Common defines for v7m cpus + */ +#define V7M_SCS_ICTR IOMEM(0xe000e004) +#define V7M_SCS_ICTR_INTLINESNUM_MASK 0x0000000f + +#define BASEADDR_V7M_SCB IOMEM(0xe000ed00) + +#define V7M_SCB_CPUID 0x00 + +#define V7M_SCB_ICSR 0x04 +#define V7M_SCB_ICSR_PENDSVSET (1 << 28) +#define V7M_SCB_ICSR_PENDSVCLR (1 << 27) +#define V7M_SCB_ICSR_RETTOBASE (1 << 11) + +#define V7M_SCB_VTOR 0x08 + +#define V7M_SCB_SCR 0x10 +#define V7M_SCB_SCR_SLEEPDEEP (1 << 2) + +#define V7M_SCB_CCR 0x14 +#define V7M_SCB_CCR_STKALIGN (1 << 9) + +#define V7M_SCB_SHPR2 0x1c +#define V7M_SCB_SHPR3 0x20 + +#define V7M_SCB_SHCSR 0x24 +#define V7M_SCB_SHCSR_USGFAULTENA (1 << 18) +#define V7M_SCB_SHCSR_BUSFAULTENA (1 << 17) +#define V7M_SCB_SHCSR_MEMFAULTENA (1 << 16) + +#define V7M_xPSR_FRAMEPTRALIGN 0x00000200 +#define V7M_xPSR_EXCEPTIONNO 0x000001ff + +/* + * When branching to an address that has bits [31:28] == 0xf an exception return + * occurs. Bits [27:5] are reserved (SBOP). If the processor implements the FP + * extension Bit [4] defines if the exception frame has space allocated for FP + * state information, SBOP otherwise. Bit [3] defines the mode that is returned + * to (0 -> handler mode; 1 -> thread mode). Bit [2] defines which sp is used + * (0 -> msp; 1 -> psp). Bits [1:0] are fixed to 0b01. + */ +#define EXC_RET_STACK_MASK 0x00000004 +#define EXC_RET_THREADMODE_PROCESSSTACK 0xfffffffd diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index 91d38e38a0b..29da84e183f 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -65,6 +65,14 @@ #define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR #define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n) +#define IMX6SL_UART1_BASE_ADDR 0x02020000 +#define IMX6SL_UART2_BASE_ADDR 0x02024000 +#define IMX6SL_UART3_BASE_ADDR 0x02034000 +#define IMX6SL_UART4_BASE_ADDR 0x02038000 +#define IMX6SL_UART5_BASE_ADDR 0x02018000 +#define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR +#define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n) + #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT) #ifdef CONFIG_DEBUG_IMX1_UART @@ -83,6 +91,8 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX53) #elif defined(CONFIG_DEBUG_IMX6Q_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q) +#elif defined(CONFIG_DEBUG_IMX6SL_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) #endif #endif /* __DEBUG_IMX_UART_H */ diff --git a/arch/arm/include/debug/keystone.S b/arch/arm/include/debug/keystone.S new file mode 100644 index 00000000000..9aef9ba3f4f --- /dev/null +++ b/arch/arm/include/debug/keystone.S @@ -0,0 +1,43 @@ +/* + * Early serial debug output macro for Keystone SOCs + * + * Copyright 2013 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Based on RMKs low level debug code. + * Copyright (C) 1994-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/serial_reg.h> + +#define UART_SHIFT 2 +#if defined(CONFIG_DEBUG_KEYSTONE_UART0) +#define UART_PHYS 0x02530c00 +#define UART_VIRT 0xfeb30c00 +#elif defined(CONFIG_DEBUG_KEYSTONE_UART1) +#define UART_PHYS 0x02531000 +#define UART_VIRT 0xfeb31000 +#endif + + .macro addruart, rp, rv, tmp + ldr \rv, =UART_VIRT @ physical base address + ldr \rp, =UART_PHYS @ virtual base address + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx + .endm diff --git a/arch/arm/include/debug/mvebu.S b/arch/arm/include/debug/mvebu.S index df191afa3be..6517311a1c9 100644 --- a/arch/arm/include/debug/mvebu.S +++ b/arch/arm/include/debug/mvebu.S @@ -11,7 +11,12 @@ * published by the Free Software Foundation. */ +#ifdef CONFIG_DEBUG_MVEBU_UART_ALTERNATE +#define ARMADA_370_XP_REGS_PHYS_BASE 0xf1000000 +#else #define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 +#endif + #define ARMADA_370_XP_REGS_VIRT_BASE 0xfec00000 .macro addruart, rp, rv, tmp diff --git a/arch/arm/include/debug/rockchip.S b/arch/arm/include/debug/rockchip.S new file mode 100644 index 00000000000..cfd883e6958 --- /dev/null +++ b/arch/arm/include/debug/rockchip.S @@ -0,0 +1,42 @@ +/* + * Early serial output macro for Rockchip SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#if defined(CONFIG_DEBUG_RK29_UART0) +#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20060000 +#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed60000 +#elif defined(CONFIG_DEBUG_RK29_UART1) +#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20064000 +#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed64000 +#elif defined(CONFIG_DEBUG_RK29_UART2) +#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20068000 +#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed68000 +#elif defined(CONFIG_DEBUG_RK3X_UART0) +#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x10124000 +#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfeb24000 +#elif defined(CONFIG_DEBUG_RK3X_UART1) +#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x10126000 +#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfeb26000 +#elif defined(CONFIG_DEBUG_RK3X_UART2) +#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20064000 +#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed64000 +#elif defined(CONFIG_DEBUG_RK3X_UART3) +#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20068000 +#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed68000 +#endif + + .macro addruart, rp, rv, tmp + ldr \rp, =ROCKCHIP_UART_DEBUG_PHYS_BASE + ldr \rv, =ROCKCHIP_UART_DEBUG_VIRT_BASE + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/include/debug/u300.S index 8ae8e4ab34b..6f04f08a203 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/include/debug/u300.S @@ -1,14 +1,11 @@ /* - * - * arch-arm/mach-u300/include/mach/debug-macro.S - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB + * Copyright (C) 2006-2013 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * Debugging macro include header. * Author: Linus Walleij <linus.walleij@stericsson.com> */ -#include <mach/hardware.h> +#define U300_SLOW_PER_PHYS_BASE 0xc0010000 +#define U300_SLOW_PER_VIRT_BASE 0xff000000 .macro addruart, rp, rv, tmp /* If we move the address using MMU, use this. */ diff --git a/arch/arm/include/uapi/asm/ptrace.h b/arch/arm/include/uapi/asm/ptrace.h index 96ee0929790..5af0ed1b825 100644 --- a/arch/arm/include/uapi/asm/ptrace.h +++ b/arch/arm/include/uapi/asm/ptrace.h @@ -34,28 +34,47 @@ /* * PSR bits + * Note on V7M there is no mode contained in the PSR */ #define USR26_MODE 0x00000000 #define FIQ26_MODE 0x00000001 #define IRQ26_MODE 0x00000002 #define SVC26_MODE 0x00000003 +#if defined(__KERNEL__) && defined(CONFIG_CPU_V7M) +/* + * Use 0 here to get code right that creates a userspace + * or kernel space thread. + */ +#define USR_MODE 0x00000000 +#define SVC_MODE 0x00000000 +#else #define USR_MODE 0x00000010 +#define SVC_MODE 0x00000013 +#endif #define FIQ_MODE 0x00000011 #define IRQ_MODE 0x00000012 -#define SVC_MODE 0x00000013 #define ABT_MODE 0x00000017 #define HYP_MODE 0x0000001a #define UND_MODE 0x0000001b #define SYSTEM_MODE 0x0000001f #define MODE32_BIT 0x00000010 #define MODE_MASK 0x0000001f -#define PSR_T_BIT 0x00000020 -#define PSR_F_BIT 0x00000040 -#define PSR_I_BIT 0x00000080 -#define PSR_A_BIT 0x00000100 -#define PSR_E_BIT 0x00000200 -#define PSR_J_BIT 0x01000000 -#define PSR_Q_BIT 0x08000000 + +#define V4_PSR_T_BIT 0x00000020 /* >= V4T, but not V7M */ +#define V7M_PSR_T_BIT 0x01000000 +#if defined(__KERNEL__) && defined(CONFIG_CPU_V7M) +#define PSR_T_BIT V7M_PSR_T_BIT +#else +/* for compatibility */ +#define PSR_T_BIT V4_PSR_T_BIT +#endif + +#define PSR_F_BIT 0x00000040 /* >= V4, but not V7M */ +#define PSR_I_BIT 0x00000080 /* >= V4, but not V7M */ +#define PSR_A_BIT 0x00000100 /* >= V6, but not V7M */ +#define PSR_E_BIT 0x00000200 /* >= V6, but not V7M */ +#define PSR_J_BIT 0x01000000 /* >= V5J, but not V7M */ +#define PSR_Q_BIT 0x08000000 /* >= V5E, including V7M */ #define PSR_V_BIT 0x10000000 #define PSR_C_BIT 0x20000000 #define PSR_Z_BIT 0x40000000 diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 5f3338eacad..f4285b5ffb0 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -15,7 +15,7 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. -obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ +obj-y := elf.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o sched_clock.o \ setup.o signal.o stacktrace.o sys_arm.o time.o traps.o @@ -23,6 +23,12 @@ obj-$(CONFIG_ATAGS) += atags_parse.o obj-$(CONFIG_ATAGS_PROC) += atags_proc.o obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o +ifeq ($(CONFIG_CPU_V7M),y) +obj-y += entry-v7m.o +else +obj-y += entry-armv.o +endif + obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o @@ -82,6 +88,9 @@ obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o -obj-$(CONFIG_ARM_PSCI) += psci.o +ifeq ($(CONFIG_ARM_PSCI),y) +obj-y += psci.o +obj-$(CONFIG_SMP) += psci_smp.o +endif extra-y := $(head-y) vmlinux.lds diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index b2ed73c4548..261fcc82616 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -445,7 +445,8 @@ static int pcibios_init_resources(int busnr, struct pci_sys_data *sys) return 0; } -static void pcibios_init_hw(struct hw_pci *hw, struct list_head *head) +static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, + struct list_head *head) { struct pci_sys_data *sys = NULL; int ret; @@ -480,7 +481,7 @@ static void pcibios_init_hw(struct hw_pci *hw, struct list_head *head) if (hw->scan) sys->bus = hw->scan(nr, sys); else - sys->bus = pci_scan_root_bus(NULL, sys->busnr, + sys->bus = pci_scan_root_bus(parent, sys->busnr, hw->ops, sys, &sys->resources); if (!sys->bus) @@ -497,7 +498,7 @@ static void pcibios_init_hw(struct hw_pci *hw, struct list_head *head) } } -void pci_common_init(struct hw_pci *hw) +void pci_common_init_dev(struct device *parent, struct hw_pci *hw) { struct pci_sys_data *sys; LIST_HEAD(head); @@ -505,7 +506,7 @@ void pci_common_init(struct hw_pci *hw) pci_add_flags(PCI_REASSIGN_ALL_RSRC); if (hw->preinit) hw->preinit(); - pcibios_init_hw(hw, &head); + pcibios_init_hw(parent, hw, &head); if (hw->postinit) hw->postinit(); diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index bc5bc0a9713..85a72b0809c 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -350,6 +350,9 @@ ENDPROC(ftrace_stub) .align 5 ENTRY(vector_swi) +#ifdef CONFIG_CPU_V7M + v7m_exception_entry +#else sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0 - r12 ARM( add r8, sp, #S_PC ) @@ -360,6 +363,7 @@ ENTRY(vector_swi) str lr, [sp, #S_PC] @ Save calling PC str r8, [sp, #S_PSR] @ Save CPSR str r0, [sp, #S_OLD_R0] @ Save OLD_R0 +#endif zero_fp /* diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 160f3376ba6..de23a9beed1 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -5,6 +5,7 @@ #include <asm/asm-offsets.h> #include <asm/errno.h> #include <asm/thread_info.h> +#include <asm/v7m.h> @ Bad Abort numbers @ ----------------- @@ -44,6 +45,116 @@ #endif .endm +#ifdef CONFIG_CPU_V7M +/* + * ARMv7-M exception entry/exit macros. + * + * xPSR, ReturnAddress(), LR (R14), R12, R3, R2, R1, and R0 are + * automatically saved on the current stack (32 words) before + * switching to the exception stack (SP_main). + * + * If exception is taken while in user mode, SP_main is + * empty. Otherwise, SP_main is aligned to 64 bit automatically + * (CCR.STKALIGN set). + * + * Linux assumes that the interrupts are disabled when entering an + * exception handler and it may BUG if this is not the case. Interrupts + * are disabled during entry and reenabled in the exit macro. + * + * v7m_exception_slow_exit is used when returning from SVC or PendSV. + * When returning to kernel mode, we don't return from exception. + */ + .macro v7m_exception_entry + @ determine the location of the registers saved by the core during + @ exception entry. Depending on the mode the cpu was in when the + @ exception happend that is either on the main or the process stack. + @ Bit 2 of EXC_RETURN stored in the lr register specifies which stack + @ was used. + tst lr, #EXC_RET_STACK_MASK + mrsne r12, psp + moveq r12, sp + + @ we cannot rely on r0-r3 and r12 matching the value saved in the + @ exception frame because of tail-chaining. So these have to be + @ reloaded. + ldmia r12!, {r0-r3} + + @ Linux expects to have irqs off. Do it here before taking stack space + cpsid i + + sub sp, #S_FRAME_SIZE-S_IP + stmdb sp!, {r0-r11} + + @ load saved r12, lr, return address and xPSR. + @ r0-r7 are used for signals and never touched from now on. Clobbering + @ r8-r12 is OK. + mov r9, r12 + ldmia r9!, {r8, r10-r12} + + @ calculate the original stack pointer value. + @ r9 currently points to the memory location just above the auto saved + @ xPSR. + @ The cpu might automatically 8-byte align the stack. Bit 9 + @ of the saved xPSR specifies if stack aligning took place. In this case + @ another 32-bit value is included in the stack. + + tst r12, V7M_xPSR_FRAMEPTRALIGN + addne r9, r9, #4 + + @ store saved r12 using str to have a register to hold the base for stm + str r8, [sp, #S_IP] + add r8, sp, #S_SP + @ store r13-r15, xPSR + stmia r8!, {r9-r12} + @ store old_r0 + str r0, [r8] + .endm + + /* + * PENDSV and SVCALL are configured to have the same exception + * priorities. As a kernel thread runs at SVCALL execution priority it + * can never be preempted and so we will never have to return to a + * kernel thread here. + */ + .macro v7m_exception_slow_exit ret_r0 + cpsid i + ldr lr, =EXC_RET_THREADMODE_PROCESSSTACK + + @ read original r12, sp, lr, pc and xPSR + add r12, sp, #S_IP + ldmia r12, {r1-r5} + + @ an exception frame is always 8-byte aligned. To tell the hardware if + @ the sp to be restored is aligned or not set bit 9 of the saved xPSR + @ accordingly. + tst r2, #4 + subne r2, r2, #4 + orrne r5, V7M_xPSR_FRAMEPTRALIGN + biceq r5, V7M_xPSR_FRAMEPTRALIGN + + @ write basic exception frame + stmdb r2!, {r1, r3-r5} + ldmia sp, {r1, r3-r5} + .if \ret_r0 + stmdb r2!, {r0, r3-r5} + .else + stmdb r2!, {r1, r3-r5} + .endif + + @ restore process sp + msr psp, r2 + + @ restore original r4-r11 + ldmia sp!, {r0-r11} + + @ restore main sp + add sp, sp, #S_FRAME_SIZE-S_IP + + cpsie i + bx lr + .endm +#endif /* CONFIG_CPU_V7M */ + @ @ Store/load the USER SP and LR registers by switching to the SYS @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not @@ -165,6 +276,18 @@ rfeia sp! .endm +#ifdef CONFIG_CPU_V7M + /* + * Note we don't need to do clrex here as clearing the local monitor is + * part of each exception entry and exit sequence. + */ + .macro restore_user_regs, fast = 0, offset = 0 + .if \offset + add sp, #\offset + .endif + v7m_exception_slow_exit ret_r0 = \fast + .endm +#else /* ifdef CONFIG_CPU_V7M */ .macro restore_user_regs, fast = 0, offset = 0 clrex @ clear the exclusive monitor mov r2, sp @@ -181,6 +304,7 @@ add sp, sp, #S_FRAME_SIZE - S_SP movs pc, lr @ return & move spsr_svc into cpsr .endm +#endif /* ifdef CONFIG_CPU_V7M / else */ .macro get_thread_info, rd mov \rd, sp diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S new file mode 100644 index 00000000000..e00621f1403 --- /dev/null +++ b/arch/arm/kernel/entry-v7m.S @@ -0,0 +1,143 @@ +/* + * linux/arch/arm/kernel/entry-v7m.S + * + * Copyright (C) 2008 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Low-level vector interface routines for the ARMv7-M architecture + */ +#include <asm/memory.h> +#include <asm/glue.h> +#include <asm/thread_notify.h> +#include <asm/v7m.h> + +#include <mach/entry-macro.S> + +#include "entry-header.S" + +#ifdef CONFIG_TRACE_IRQFLAGS +#error "CONFIG_TRACE_IRQFLAGS not supported on the current ARMv7M implementation" +#endif + +__invalid_entry: + v7m_exception_entry + adr r0, strerr + mrs r1, ipsr + mov r2, lr + bl printk + mov r0, sp + bl show_regs +1: b 1b +ENDPROC(__invalid_entry) + +strerr: .asciz "\nUnhandled exception: IPSR = %08lx LR = %08lx\n" + + .align 2 +__irq_entry: + v7m_exception_entry + + @ + @ Invoke the IRQ handler + @ + mrs r0, ipsr + ldr r1, =V7M_xPSR_EXCEPTIONNO + and r0, r1 + sub r0, #16 + mov r1, sp + stmdb sp!, {lr} + @ routine called with r0 = irq number, r1 = struct pt_regs * + bl nvic_do_IRQ + + pop {lr} + @ + @ Check for any pending work if returning to user + @ + ldr r1, =BASEADDR_V7M_SCB + ldr r0, [r1, V7M_SCB_ICSR] + tst r0, V7M_SCB_ICSR_RETTOBASE + beq 2f + + get_thread_info tsk + ldr r2, [tsk, #TI_FLAGS] + tst r2, #_TIF_WORK_MASK + beq 2f @ no work pending + mov r0, #V7M_SCB_ICSR_PENDSVSET + str r0, [r1, V7M_SCB_ICSR] @ raise PendSV + +2: + @ registers r0-r3 and r12 are automatically restored on exception + @ return. r4-r7 were not clobbered in v7m_exception_entry so for + @ correctness they don't need to be restored. So only r8-r11 must be + @ restored here. The easiest way to do so is to restore r0-r7, too. + ldmia sp!, {r0-r11} + add sp, #S_FRAME_SIZE-S_IP + cpsie i + bx lr +ENDPROC(__irq_entry) + +__pendsv_entry: + v7m_exception_entry + + ldr r1, =BASEADDR_V7M_SCB + mov r0, #V7M_SCB_ICSR_PENDSVCLR + str r0, [r1, V7M_SCB_ICSR] @ clear PendSV + + @ execute the pending work, including reschedule + get_thread_info tsk + mov why, #0 + b ret_to_user +ENDPROC(__pendsv_entry) + +/* + * Register switch for ARMv7-M processors. + * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info + * previous and next are guaranteed not to be the same. + */ +ENTRY(__switch_to) + .fnstart + .cantunwind + add ip, r1, #TI_CPU_SAVE + stmia ip!, {r4 - r11} @ Store most regs on stack + str sp, [ip], #4 + str lr, [ip], #4 + mov r5, r0 + add r4, r2, #TI_CPU_SAVE + ldr r0, =thread_notify_head + mov r1, #THREAD_NOTIFY_SWITCH + bl atomic_notifier_call_chain + mov ip, r4 + mov r0, r5 + ldmia ip!, {r4 - r11} @ Load all regs saved previously + ldr sp, [ip] + ldr pc, [ip, #4]! + .fnend +ENDPROC(__switch_to) + + .data + .align 8 +/* + * Vector table (64 words => 256 bytes natural alignment) + */ +ENTRY(vector_table) + .long 0 @ 0 - Reset stack pointer + .long __invalid_entry @ 1 - Reset + .long __invalid_entry @ 2 - NMI + .long __invalid_entry @ 3 - HardFault + .long __invalid_entry @ 4 - MemManage + .long __invalid_entry @ 5 - BusFault + .long __invalid_entry @ 6 - UsageFault + .long __invalid_entry @ 7 - Reserved + .long __invalid_entry @ 8 - Reserved + .long __invalid_entry @ 9 - Reserved + .long __invalid_entry @ 10 - Reserved + .long vector_swi @ 11 - SVCall + .long __invalid_entry @ 12 - Debug Monitor + .long __invalid_entry @ 13 - Reserved + .long __pendsv_entry @ 14 - PendSV + .long __invalid_entry @ 15 - SysTick + .rept 64 - 16 + .long __irq_entry @ 16..64 - External Interrupts + .endr diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 6a2e09c952c..8812ce88f7a 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -19,6 +19,7 @@ #include <asm/asm-offsets.h> #include <asm/cp15.h> #include <asm/thread_info.h> +#include <asm/v7m.h> /* * Kernel startup entry point. @@ -50,10 +51,13 @@ ENTRY(stext) setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled -#ifndef CONFIG_CPU_CP15 - ldr r9, =CONFIG_PROCESSOR_ID -#else +#if defined(CONFIG_CPU_CP15) mrc p15, 0, r9, c0, c0 @ get processor id +#elif defined(CONFIG_CPU_V7M) + ldr r9, =BASEADDR_V7M_SCB + ldr r9, [r9, V7M_SCB_CPUID] +#else + ldr r9, =CONFIG_PROCESSOR_ID #endif bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c index 36531643cc2..46931880093 100644 --- a/arch/arm/kernel/psci.c +++ b/arch/arm/kernel/psci.c @@ -158,7 +158,7 @@ static const struct of_device_id psci_of_match[] __initconst = { {}, }; -static int __init psci_init(void) +void __init psci_init(void) { struct device_node *np; const char *method; @@ -166,7 +166,7 @@ static int __init psci_init(void) np = of_find_matching_node(NULL, psci_of_match); if (!np) - return 0; + return; pr_info("probing function IDs from device-tree\n"); @@ -206,6 +206,5 @@ static int __init psci_init(void) out_put_node: of_node_put(np); - return 0; + return; } -early_initcall(psci_init); diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c new file mode 100644 index 00000000000..23a11424c56 --- /dev/null +++ b/arch/arm/kernel/psci_smp.c @@ -0,0 +1,84 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +#include <linux/init.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/smp.h> +#include <linux/of.h> + +#include <asm/psci.h> +#include <asm/smp_plat.h> + +/* + * psci_smp assumes that the following is true about PSCI: + * + * cpu_suspend Suspend the execution on a CPU + * @state we don't currently describe affinity levels, so just pass 0. + * @entry_point the first instruction to be executed on return + * returns 0 success, < 0 on failure + * + * cpu_off Power down a CPU + * @state we don't currently describe affinity levels, so just pass 0. + * no return on successful call + * + * cpu_on Power up a CPU + * @cpuid cpuid of target CPU, as from MPIDR + * @entry_point the first instruction to be executed on return + * returns 0 success, < 0 on failure + * + * migrate Migrate the context to a different CPU + * @cpuid cpuid of target CPU, as from MPIDR + * returns 0 success, < 0 on failure + * + */ + +extern void secondary_startup(void); + +static int __cpuinit psci_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + if (psci_ops.cpu_on) + return psci_ops.cpu_on(cpu_logical_map(cpu), + __pa(secondary_startup)); + return -ENODEV; +} + +#ifdef CONFIG_HOTPLUG_CPU +void __ref psci_cpu_die(unsigned int cpu) +{ + const struct psci_power_state ps = { + .type = PSCI_POWER_STATE_TYPE_POWER_DOWN, + }; + + if (psci_ops.cpu_off) + psci_ops.cpu_off(ps); + + /* We should never return */ + panic("psci: cpu %d failed to shutdown\n", cpu); +} +#else +#define psci_cpu_die NULL +#endif + +bool __init psci_smp_available(void) +{ + /* is cpu_on available at least? */ + return (psci_ops.cpu_on != NULL); +} + +struct smp_operations __initdata psci_smp_ops = { + .smp_boot_secondary = psci_boot_secondary, + .cpu_die = psci_cpu_die, +}; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b4b1d397592..1c8278de6c4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -37,6 +37,7 @@ #include <asm/cputype.h> #include <asm/elf.h> #include <asm/procinfo.h> +#include <asm/psci.h> #include <asm/sections.h> #include <asm/setup.h> #include <asm/smp_plat.h> @@ -128,7 +129,9 @@ struct stack { u32 und[3]; } ____cacheline_aligned; +#ifndef CONFIG_CPU_V7M static struct stack stacks[NR_CPUS]; +#endif char elf_platform[ELF_PLATFORM_SIZE]; EXPORT_SYMBOL(elf_platform); @@ -207,7 +210,7 @@ static const char *proc_arch[] = { "5TEJ", "6TEJ", "7", - "?(11)", + "7M", "?(12)", "?(13)", "?(14)", @@ -216,6 +219,12 @@ static const char *proc_arch[] = { "?(17)", }; +#ifdef CONFIG_CPU_V7M +static int __get_cpu_architecture(void) +{ + return CPU_ARCH_ARMv7M; +} +#else static int __get_cpu_architecture(void) { int cpu_arch; @@ -248,6 +257,7 @@ static int __get_cpu_architecture(void) return cpu_arch; } +#endif int __pure cpu_architecture(void) { @@ -293,7 +303,9 @@ static void __init cacheid_init(void) { unsigned int arch = cpu_architecture(); - if (arch >= CPU_ARCH_ARMv6) { + if (arch == CPU_ARCH_ARMv7M) { + cacheid = 0; + } else if (arch >= CPU_ARCH_ARMv6) { unsigned int cachetype = read_cpuid_cachetype(); if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ @@ -392,6 +404,7 @@ static void __init feat_v6_fixup(void) */ void notrace cpu_init(void) { +#ifndef CONFIG_CPU_V7M unsigned int cpu = smp_processor_id(); struct stack *stk = &stacks[cpu]; @@ -442,6 +455,7 @@ void notrace cpu_init(void) "I" (offsetof(struct stack, und[0])), PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE) : "r14"); +#endif } u32 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID }; @@ -796,9 +810,15 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); arm_dt_init_cpu_maps(); + psci_init(); #ifdef CONFIG_SMP if (is_smp()) { - smp_set_ops(mdesc->smp); + if (!mdesc->smp_init || !mdesc->smp_init()) { + if (psci_smp_available()) + smp_set_ops(&psci_smp_ops); + else if (mdesc->smp) + smp_set_ops(mdesc->smp); + } smp_init_cpus(); } #endif diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 18b32e8e449..486e12a0f26 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -812,6 +812,7 @@ static void __init kuser_get_tls_init(unsigned long vectors) void __init early_trap_init(void *vectors_base) { +#ifndef CONFIG_CPU_V7M unsigned long vectors = (unsigned long)vectors_base; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; @@ -843,4 +844,11 @@ void __init early_trap_init(void *vectors_base) flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); +#else /* ifndef CONFIG_CPU_V7M */ + /* + * on V7-M there is no need to copy the vector table to a dedicated + * memory area. The address is configurable and so a table in the kernel + * image can be used. + */ +#endif } diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 2d00165e85e..01ad4d41e72 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -22,8 +22,7 @@ config ARCH_CLEP7312 config ARCH_EDB7211 bool "EDB7211" - select ARCH_SELECT_MEMORY_MODEL - select ARCH_SPARSEMEM_ENABLE + select ARCH_HAS_HOLES_MEMORYMODEL help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 992995af666..f30ed2b496f 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -4,10 +4,7 @@ # Object file lists. -obj-y := common.o -obj-m := -obj-n := -obj- := +obj-y := common.o devices.o obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c index f38584709df..5867aebd8d0 100644 --- a/arch/arm/mach-clps711x/board-autcpu12.c +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -26,6 +26,8 @@ #include <linux/gpio.h> #include <linux/ioport.h> #include <linux/interrupt.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand-gpio.h> #include <linux/platform_device.h> @@ -40,38 +42,49 @@ #include <asm/page.h> #include <asm/mach/map.h> -#include <mach/autcpu12.h> #include "common.h" +#include "devices.h" -#define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300) -#define AUTCPU12_CS8900_IRQ (IRQ_EINT3) +/* NOR flash */ +#define AUTCPU12_FLASH_BASE (CS0_PHYS_BASE) + +/* Board specific hardware definitions */ +#define AUTCPU12_CHAR_LCD_BASE (CS1_PHYS_BASE + 0x00000000) +#define AUTCPU12_CSAUX1_BASE (CS1_PHYS_BASE + 0x04000000) +#define AUTCPU12_CAN_BASE (CS1_PHYS_BASE + 0x08000000) +#define AUTCPU12_TOUCH_BASE (CS1_PHYS_BASE + 0x0a000000) +#define AUTCPU12_IO_BASE (CS1_PHYS_BASE + 0x0c000000) +#define AUTCPU12_LPT_BASE (CS1_PHYS_BASE + 0x0e000000) + +/* NVRAM */ +#define AUTCPU12_NVRAM_BASE (CS1_PHYS_BASE + 0x02000000) +/* SmartMedia flash */ #define AUTCPU12_SMC_BASE (CS1_PHYS_BASE + 0x06000000) #define AUTCPU12_SMC_SEL_BASE (AUTCPU12_SMC_BASE + 0x10) +/* Ethernet */ +#define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define AUTCPU12_CS8900_IRQ (IRQ_EINT3) + +/* NAND flash */ #define AUTCPU12_MMGPIO_BASE (CLPS711X_NR_GPIO) #define AUTCPU12_SMC_NCE (AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */ #define AUTCPU12_SMC_RDY CLPS711X_GPIO(1, 2) #define AUTCPU12_SMC_ALE CLPS711X_GPIO(1, 3) #define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 3) +/* LCD contrast digital potentiometer */ +#define AUTCPU12_DPOT_CS CLPS711X_GPIO(4, 0) +#define AUTCPU12_DPOT_CLK CLPS711X_GPIO(4, 1) +#define AUTCPU12_DPOT_UD CLPS711X_GPIO(4, 2) + static struct resource autcpu12_cs8900_resource[] __initdata = { DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K), DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ), }; -static struct resource autcpu12_nvram_resource[] __initdata = { - DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"), -}; - -static struct platform_device autcpu12_nvram_pdev __initdata = { - .name = "autcpu12_nvram", - .id = -1, - .resource = autcpu12_nvram_resource, - .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), -}; - static struct resource autcpu12_nand_resource[] __initdata = { DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16), }; @@ -147,17 +160,106 @@ static struct platform_device autcpu12_mmgpio_pdev __initdata = { }, }; +static const struct gpio autcpu12_gpios[] __initconst = { + { AUTCPU12_DPOT_CS, GPIOF_OUT_INIT_HIGH, "DPOT CS" }, + { AUTCPU12_DPOT_CLK, GPIOF_OUT_INIT_LOW, "DPOT CLK" }, + { AUTCPU12_DPOT_UD, GPIOF_OUT_INIT_LOW, "DPOT UD" }, +}; + +static struct mtd_partition autcpu12_flash_partitions[] = { + { + .name = "NOR.0", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data autcpu12_flash_pdata = { + .width = 4, + .parts = autcpu12_flash_partitions, + .nr_parts = ARRAY_SIZE(autcpu12_flash_partitions), +}; + +static struct resource autcpu12_flash_resources[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_FLASH_BASE, SZ_8M), +}; + +static struct platform_device autcpu12_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = autcpu12_flash_resources, + .num_resources = ARRAY_SIZE(autcpu12_flash_resources), + .dev = { + .platform_data = &autcpu12_flash_pdata, + }, +}; + +static struct resource autcpu12_nvram_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_NVRAM_BASE, 0), +}; + +static struct platdata_mtd_ram autcpu12_nvram_pdata = { + .bankwidth = 4, +}; + +static struct platform_device autcpu12_nvram_pdev __initdata = { + .name = "mtd-ram", + .id = 0, + .resource = autcpu12_nvram_resource, + .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), + .dev = { + .platform_data = &autcpu12_nvram_pdata, + }, +}; + +static void __init autcpu12_nvram_init(void) +{ + void __iomem *nvram; + unsigned int save[2]; + resource_size_t nvram_size = SZ_128K; + + /* + * Check for 32K/128K + * Read ofs 0K + * Read ofs 64K + * Write complement to ofs 64K + * Read and check result on ofs 0K + * Restore contents + */ + nvram = ioremap(autcpu12_nvram_resource[0].start, SZ_128K); + if (nvram) { + save[0] = readl(nvram + 0); + save[1] = readl(nvram + SZ_64K); + writel(~save[0], nvram + SZ_64K); + if (readl(nvram + 0) != save[0]) { + writel(save[0], nvram + 0); + nvram_size = SZ_32K; + } else + writel(save[1], nvram + SZ_64K); + iounmap(nvram); + + autcpu12_nvram_resource[0].end = + autcpu12_nvram_resource[0].start + nvram_size - 1; + platform_device_register(&autcpu12_nvram_pdev); + } else + pr_err("Failed to remap NVRAM resource\n"); +} + static void __init autcpu12_init(void) { + clps711x_devices_init(); + platform_device_register(&autcpu12_flash_pdev); platform_device_register_simple("video-clps711x", 0, NULL, 0); platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource, ARRAY_SIZE(autcpu12_cs8900_resource)); platform_device_register(&autcpu12_mmgpio_pdev); - platform_device_register(&autcpu12_nvram_pdev); + autcpu12_nvram_init(); } static void __init autcpu12_init_late(void) { + gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios)); + if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) { /* We are need both drivers to handle NAND */ platform_device_register(&autcpu12_nand_pdev); @@ -169,6 +271,7 @@ MACHINE_START(AUTCPU12, "autronix autcpu12") .atag_offset = 0x20000, .nr_irqs = CLPS711X_NR_IRQS, .map_io = clps711x_map_io, + .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .init_machine = autcpu12_init, diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c index baab7da33c9..a9e38c6bcfb 100644 --- a/arch/arm/mach-clps711x/board-cdb89712.c +++ b/arch/arm/mach-clps711x/board-cdb89712.c @@ -39,6 +39,7 @@ #include <asm/mach/map.h> #include "common.h" +#include "devices.h" #define CDB89712_CS8900_BASE (CS2_PHYS_BASE + 0x300) #define CDB89712_CS8900_IRQ (IRQ_EINT3) @@ -127,6 +128,7 @@ static struct platform_device cdb89712_sram_pdev __initdata = { static void __init cdb89712_init(void) { + clps711x_devices_init(); platform_device_register(&cdb89712_flash_pdev); platform_device_register(&cdb89712_bootrom_pdev); platform_device_register(&cdb89712_sram_pdev); @@ -139,6 +141,7 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712") .atag_offset = 0x100, .nr_irqs = CLPS711X_NR_IRQS, .map_io = clps711x_map_io, + .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .init_machine = cdb89712_init, diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c index 014aa3c19a0..b4764246d0f 100644 --- a/arch/arm/mach-clps711x/board-clep7312.c +++ b/arch/arm/mach-clps711x/board-clep7312.c @@ -39,6 +39,7 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_clep7312, .map_io = clps711x_map_io, + .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .handle_irq = clps711x_handle_irq, diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c index 5f928e9ed2e..9dfb990f080 100644 --- a/arch/arm/mach-clps711x/board-edb7211.c +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -12,6 +12,7 @@ #include <linux/delay.h> #include <linux/memblock.h> #include <linux/types.h> +#include <linux/i2c-gpio.h> #include <linux/interrupt.h> #include <linux/backlight.h> #include <linux/platform_device.h> @@ -29,6 +30,7 @@ #include <mach/hardware.h> #include "common.h" +#include "devices.h" #define VIDEORAM_SIZE SZ_128K @@ -36,11 +38,24 @@ #define EDB7211_LCDEN CLPS711X_GPIO(3, 2) #define EDB7211_LCDBL CLPS711X_GPIO(3, 3) +#define EDB7211_I2C_SDA CLPS711X_GPIO(3, 4) +#define EDB7211_I2C_SCL CLPS711X_GPIO(3, 5) + #define EDB7211_FLASH0_BASE (CS0_PHYS_BASE) #define EDB7211_FLASH1_BASE (CS1_PHYS_BASE) + #define EDB7211_CS8900_BASE (CS2_PHYS_BASE + 0x300) #define EDB7211_CS8900_IRQ (IRQ_EINT3) +/* The extra 8 lines of the keyboard matrix */ +#define EDB7211_EXTKBD_BASE (CS3_PHYS_BASE) + +static struct i2c_gpio_platform_data edb7211_i2c_pdata __initdata = { + .sda_pin = EDB7211_I2C_SDA, + .scl_pin = EDB7211_I2C_SCL, + .scl_is_output_only = 1, +}; + static struct resource edb7211_cs8900_resource[] __initdata = { DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K), DEFINE_RES_IRQ(EDB7211_CS8900_IRQ), @@ -94,13 +109,14 @@ static struct plat_lcd_data edb7211_lcd_power_pdata = { static void edb7211_lcd_backlight_set_intensity(int intensity) { - gpio_set_value(EDB7211_LCDBL, intensity); + gpio_set_value(EDB7211_LCDBL, !!intensity); + clps_writel((clps_readl(PMPCON) & 0xf0ff) | (intensity << 8), PMPCON); } static struct generic_bl_info edb7211_lcd_backlight_pdata = { .name = "lcd-backlight.0", .default_intensity = 0x01, - .max_intensity = 0x01, + .max_intensity = 0x0f, .set_bl_intensity = edb7211_lcd_backlight_set_intensity, }; @@ -112,8 +128,8 @@ static struct gpio edb7211_gpios[] __initconst = { static struct map_desc edb7211_io_desc[] __initdata = { { /* Memory-mapped extra keyboard row */ - .virtual = IO_ADDRESS(EP7211_PHYS_EXTKBD), - .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), + .virtual = IO_ADDRESS(EDB7211_EXTKBD_BASE), + .pfn = __phys_to_pfn(EDB7211_EXTKBD_BASE), .length = SZ_1M, .type = MT_DEVICE, }, @@ -151,6 +167,11 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) static void __init edb7211_init(void) { + clps711x_devices_init(); +} + +static void __init edb7211_init_late(void) +{ gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios)); platform_device_register(&edb7211_flash_pdev); @@ -163,6 +184,9 @@ static void __init edb7211_init(void) platform_device_register_simple("video-clps711x", 0, NULL, 0); platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource, ARRAY_SIZE(edb7211_cs8900_resource)); + platform_device_register_data(&platform_bus, "i2c-gpio", 0, + &edb7211_i2c_pdata, + sizeof(edb7211_i2c_pdata)); } MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") @@ -172,9 +196,11 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") .fixup = fixup_edb7211, .reserve = edb7211_reserve, .map_io = edb7211_map_io, + .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .init_machine = edb7211_init, + .init_late = edb7211_init_late, .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c index c5675efc8c6..b1561e3d7c5 100644 --- a/arch/arm/mach-clps711x/board-fortunet.c +++ b/arch/arm/mach-clps711x/board-fortunet.c @@ -77,6 +77,7 @@ MACHINE_START(FORTUNET, "ARM-FortuNet") .nr_irqs = CLPS711X_NR_IRQS, .fixup = fortunet_fixup, .map_io = clps711x_map_io, + .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .handle_irq = clps711x_handle_irq, diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c index 8d3ee677113..dd81b06f68f 100644 --- a/arch/arm/mach-clps711x/board-p720t.c +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -23,10 +23,12 @@ #include <linux/string.h> #include <linux/mm.h> #include <linux/io.h> +#include <linux/gpio.h> #include <linux/slab.h> #include <linux/leds.h> #include <linux/sizes.h> #include <linux/backlight.h> +#include <linux/basic_mmio_gpio.h> #include <linux/platform_device.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand-gpio.h> @@ -38,11 +40,11 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/syspld.h> #include <video/platform_lcd.h> #include "common.h" +#include "devices.h" #define P720T_USERLED CLPS711X_GPIO(3, 0) #define P720T_NAND_CLE CLPS711X_GPIO(4, 0) @@ -51,6 +53,178 @@ #define P720T_NAND_BASE (CLPS711X_SDRAM1_BASE) +#define P720T_MMGPIO_BASE (CLPS711X_NR_GPIO) + +#define SYSPLD_PHYS_BASE IOMEM(CS1_PHYS_BASE) + +#define PLD_INT (SYSPLD_PHYS_BASE + 0x000000) +#define PLD_INT_MMGPIO_BASE (P720T_MMGPIO_BASE + 0) +#define PLD_INT_PENIRQ (PLD_INT_MMGPIO_BASE + 5) +#define PLD_INT_UCB_IRQ (PLD_INT_MMGPIO_BASE + 1) +#define PLD_INT_KBD_ATN (PLD_INT_MMGPIO_BASE + 0) /* EINT1 */ + +#define PLD_PWR (SYSPLD_PHYS_BASE + 0x000004) +#define PLD_PWR_MMGPIO_BASE (P720T_MMGPIO_BASE + 8) +#define PLD_PWR_EXT (PLD_PWR_MMGPIO_BASE + 5) +#define PLD_PWR_MODE (PLD_PWR_MMGPIO_BASE + 4) /* 1 = PWM, 0 = PFM */ +#define PLD_S4_ON (PLD_PWR_MMGPIO_BASE + 3) /* LCD bias voltage enable */ +#define PLD_S3_ON (PLD_PWR_MMGPIO_BASE + 2) /* LCD backlight enable */ +#define PLD_S2_ON (PLD_PWR_MMGPIO_BASE + 1) /* LCD 3V3 supply enable */ +#define PLD_S1_ON (PLD_PWR_MMGPIO_BASE + 0) /* LCD 3V supply enable */ + +#define PLD_KBD (SYSPLD_PHYS_BASE + 0x000008) +#define PLD_KBD_MMGPIO_BASE (P720T_MMGPIO_BASE + 16) +#define PLD_KBD_WAKE (PLD_KBD_MMGPIO_BASE + 1) +#define PLD_KBD_EN (PLD_KBD_MMGPIO_BASE + 0) + +#define PLD_SPI (SYSPLD_PHYS_BASE + 0x00000c) +#define PLD_SPI_MMGPIO_BASE (P720T_MMGPIO_BASE + 24) +#define PLD_SPI_EN (PLD_SPI_MMGPIO_BASE + 0) + +#define PLD_IO (SYSPLD_PHYS_BASE + 0x000010) +#define PLD_IO_MMGPIO_BASE (P720T_MMGPIO_BASE + 32) +#define PLD_IO_BOOTSEL (PLD_IO_MMGPIO_BASE + 6) /* Boot sel switch */ +#define PLD_IO_USER (PLD_IO_MMGPIO_BASE + 5) /* User defined switch */ +#define PLD_IO_LED3 (PLD_IO_MMGPIO_BASE + 4) +#define PLD_IO_LED2 (PLD_IO_MMGPIO_BASE + 3) +#define PLD_IO_LED1 (PLD_IO_MMGPIO_BASE + 2) +#define PLD_IO_LED0 (PLD_IO_MMGPIO_BASE + 1) +#define PLD_IO_LEDEN (PLD_IO_MMGPIO_BASE + 0) + +#define PLD_IRDA (SYSPLD_PHYS_BASE + 0x000014) +#define PLD_IRDA_MMGPIO_BASE (P720T_MMGPIO_BASE + 40) +#define PLD_IRDA_EN (PLD_IRDA_MMGPIO_BASE + 0) + +#define PLD_COM2 (SYSPLD_PHYS_BASE + 0x000018) +#define PLD_COM2_MMGPIO_BASE (P720T_MMGPIO_BASE + 48) +#define PLD_COM2_EN (PLD_COM2_MMGPIO_BASE + 0) + +#define PLD_COM1 (SYSPLD_PHYS_BASE + 0x00001c) +#define PLD_COM1_MMGPIO_BASE (P720T_MMGPIO_BASE + 56) +#define PLD_COM1_EN (PLD_COM1_MMGPIO_BASE + 0) + +#define PLD_AUD (SYSPLD_PHYS_BASE + 0x000020) +#define PLD_AUD_MMGPIO_BASE (P720T_MMGPIO_BASE + 64) +#define PLD_AUD_DIV1 (PLD_AUD_MMGPIO_BASE + 6) +#define PLD_AUD_DIV0 (PLD_AUD_MMGPIO_BASE + 5) +#define PLD_AUD_CLK_SEL1 (PLD_AUD_MMGPIO_BASE + 4) +#define PLD_AUD_CLK_SEL0 (PLD_AUD_MMGPIO_BASE + 3) +#define PLD_AUD_MIC_PWR (PLD_AUD_MMGPIO_BASE + 2) +#define PLD_AUD_MIC_GAIN (PLD_AUD_MMGPIO_BASE + 1) +#define PLD_AUD_CODEC_EN (PLD_AUD_MMGPIO_BASE + 0) + +#define PLD_CF (SYSPLD_PHYS_BASE + 0x000024) +#define PLD_CF_MMGPIO_BASE (P720T_MMGPIO_BASE + 72) +#define PLD_CF2_SLEEP (PLD_CF_MMGPIO_BASE + 5) +#define PLD_CF1_SLEEP (PLD_CF_MMGPIO_BASE + 4) +#define PLD_CF2_nPDREQ (PLD_CF_MMGPIO_BASE + 3) +#define PLD_CF1_nPDREQ (PLD_CF_MMGPIO_BASE + 2) +#define PLD_CF2_nIRQ (PLD_CF_MMGPIO_BASE + 1) +#define PLD_CF1_nIRQ (PLD_CF_MMGPIO_BASE + 0) + +#define PLD_SDC (SYSPLD_PHYS_BASE + 0x000028) +#define PLD_SDC_MMGPIO_BASE (P720T_MMGPIO_BASE + 80) +#define PLD_SDC_INT_EN (PLD_SDC_MMGPIO_BASE + 2) +#define PLD_SDC_WP (PLD_SDC_MMGPIO_BASE + 1) +#define PLD_SDC_CD (PLD_SDC_MMGPIO_BASE + 0) + +#define PLD_CODEC (SYSPLD_PHYS_BASE + 0x400000) +#define PLD_CODEC_MMGPIO_BASE (P720T_MMGPIO_BASE + 88) +#define PLD_CODEC_IRQ3 (PLD_CODEC_MMGPIO_BASE + 4) +#define PLD_CODEC_IRQ2 (PLD_CODEC_MMGPIO_BASE + 3) +#define PLD_CODEC_IRQ1 (PLD_CODEC_MMGPIO_BASE + 2) +#define PLD_CODEC_EN (PLD_CODEC_MMGPIO_BASE + 0) + +#define PLD_BRITE (SYSPLD_PHYS_BASE + 0x400004) +#define PLD_BRITE_MMGPIO_BASE (P720T_MMGPIO_BASE + 96) +#define PLD_BRITE_UP (PLD_BRITE_MMGPIO_BASE + 1) +#define PLD_BRITE_DN (PLD_BRITE_MMGPIO_BASE + 0) + +#define PLD_LCDEN (SYSPLD_PHYS_BASE + 0x400008) +#define PLD_LCDEN_MMGPIO_BASE (P720T_MMGPIO_BASE + 104) +#define PLD_LCDEN_EN (PLD_LCDEN_MMGPIO_BASE + 0) + +#define PLD_TCH (SYSPLD_PHYS_BASE + 0x400010) +#define PLD_TCH_MMGPIO_BASE (P720T_MMGPIO_BASE + 112) +#define PLD_TCH_PENIRQ (PLD_TCH_MMGPIO_BASE + 1) +#define PLD_TCH_EN (PLD_TCH_MMGPIO_BASE + 0) + +#define PLD_GPIO (SYSPLD_PHYS_BASE + 0x400014) +#define PLD_GPIO_MMGPIO_BASE (P720T_MMGPIO_BASE + 120) +#define PLD_GPIO2 (PLD_GPIO_MMGPIO_BASE + 2) +#define PLD_GPIO1 (PLD_GPIO_MMGPIO_BASE + 1) +#define PLD_GPIO0 (PLD_GPIO_MMGPIO_BASE + 0) + +static struct gpio p720t_gpios[] __initconst = { + { PLD_S1_ON, GPIOF_OUT_INIT_LOW, "PLD_S1_ON" }, + { PLD_S2_ON, GPIOF_OUT_INIT_LOW, "PLD_S2_ON" }, + { PLD_S3_ON, GPIOF_OUT_INIT_LOW, "PLD_S3_ON" }, + { PLD_S4_ON, GPIOF_OUT_INIT_LOW, "PLD_S4_ON" }, + { PLD_KBD_EN, GPIOF_OUT_INIT_LOW, "PLD_KBD_EN" }, + { PLD_SPI_EN, GPIOF_OUT_INIT_LOW, "PLD_SPI_EN" }, + { PLD_IO_USER, GPIOF_OUT_INIT_LOW, "PLD_IO_USER" }, + { PLD_IO_LED0, GPIOF_OUT_INIT_LOW, "PLD_IO_LED0" }, + { PLD_IO_LED1, GPIOF_OUT_INIT_LOW, "PLD_IO_LED1" }, + { PLD_IO_LED2, GPIOF_OUT_INIT_LOW, "PLD_IO_LED2" }, + { PLD_IO_LED3, GPIOF_OUT_INIT_LOW, "PLD_IO_LED3" }, + { PLD_IO_LEDEN, GPIOF_OUT_INIT_LOW, "PLD_IO_LEDEN" }, + { PLD_IRDA_EN, GPIOF_OUT_INIT_LOW, "PLD_IRDA_EN" }, + { PLD_COM1_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM1_EN" }, + { PLD_COM2_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM2_EN" }, + { PLD_CODEC_EN, GPIOF_OUT_INIT_LOW, "PLD_CODEC_EN" }, + { PLD_LCDEN_EN, GPIOF_OUT_INIT_LOW, "PLD_LCDEN_EN" }, + { PLD_TCH_EN, GPIOF_OUT_INIT_LOW, "PLD_TCH_EN" }, + { P720T_USERLED,GPIOF_OUT_INIT_LOW, "USER_LED" }, +}; + +static struct resource p720t_mmgpio_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(0, 4, "dat"), +}; + +static struct bgpio_pdata p720t_mmgpio_pdata = { + .ngpio = 8, +}; + +static struct platform_device p720t_mmgpio __initdata = { + .name = "basic-mmio-gpio", + .id = -1, + .resource = p720t_mmgpio_resource, + .num_resources = ARRAY_SIZE(p720t_mmgpio_resource), + .dev = { + .platform_data = &p720t_mmgpio_pdata, + }, +}; + +static void __init p720t_mmgpio_init(void __iomem *addrbase, int gpiobase) +{ + p720t_mmgpio_resource[0].start = (unsigned long)addrbase; + p720t_mmgpio_pdata.base = gpiobase; + + platform_device_register(&p720t_mmgpio); +} + +static struct { + void __iomem *addrbase; + int gpiobase; +} mmgpios[] __initconst = { + { PLD_INT, PLD_INT_MMGPIO_BASE }, + { PLD_PWR, PLD_PWR_MMGPIO_BASE }, + { PLD_KBD, PLD_KBD_MMGPIO_BASE }, + { PLD_SPI, PLD_SPI_MMGPIO_BASE }, + { PLD_IO, PLD_IO_MMGPIO_BASE }, + { PLD_IRDA, PLD_IRDA_MMGPIO_BASE }, + { PLD_COM2, PLD_COM2_MMGPIO_BASE }, + { PLD_COM1, PLD_COM1_MMGPIO_BASE }, + { PLD_AUD, PLD_AUD_MMGPIO_BASE }, + { PLD_CF, PLD_CF_MMGPIO_BASE }, + { PLD_SDC, PLD_SDC_MMGPIO_BASE }, + { PLD_CODEC, PLD_CODEC_MMGPIO_BASE }, + { PLD_BRITE, PLD_BRITE_MMGPIO_BASE }, + { PLD_LCDEN, PLD_LCDEN_MMGPIO_BASE }, + { PLD_TCH, PLD_TCH_MMGPIO_BASE }, + { PLD_GPIO, PLD_GPIO_MMGPIO_BASE }, +}; + static struct resource p720t_nand_resource[] __initdata = { DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4), }; @@ -92,11 +266,15 @@ static struct platform_device p720t_nand_pdev __initdata = { static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) { if (power) { - PLD_LCDEN = PLD_LCDEN_EN; - PLD_PWR |= PLD_S4_ON | PLD_S2_ON | PLD_S1_ON; + gpio_set_value(PLD_LCDEN_EN, 1); + gpio_set_value(PLD_S1_ON, 1); + gpio_set_value(PLD_S2_ON, 1); + gpio_set_value(PLD_S4_ON, 1); } else { - PLD_PWR &= ~(PLD_S4_ON | PLD_S2_ON | PLD_S1_ON); - PLD_LCDEN = 0; + gpio_set_value(PLD_S1_ON, 0); + gpio_set_value(PLD_S2_ON, 0); + gpio_set_value(PLD_S4_ON, 0); + gpio_set_value(PLD_LCDEN_EN, 0); } } @@ -106,10 +284,7 @@ static struct plat_lcd_data p720t_lcd_power_pdata = { static void p720t_lcd_backlight_set_intensity(int intensity) { - if (intensity) - PLD_PWR |= PLD_S3_ON; - else - PLD_PWR = 0; + gpio_set_value(PLD_S3_ON, intensity); } static struct generic_bl_info p720t_lcd_backlight_pdata = { @@ -119,19 +294,6 @@ static struct generic_bl_info p720t_lcd_backlight_pdata = { .set_bl_intensity = p720t_lcd_backlight_set_intensity, }; -/* - * Map the P720T system PLD. It occupies two address spaces: - * 0x10000000 and 0x10400000. We map both regions as one. - */ -static struct map_desc p720t_io_desc[] __initdata = { - { - .virtual = SYSPLD_VIRT_BASE, - .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), - .length = SZ_8M, - .type = MT_DEVICE, - }, -}; - static void __init fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) { @@ -157,33 +319,6 @@ fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) } } -static void __init p720t_map_io(void) -{ - clps711x_map_io(); - iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); -} - -static void __init p720t_init_early(void) -{ - /* - * Power down as much as possible in case we don't - * have the drivers loaded. - */ - PLD_LCDEN = 0; - PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON); - - PLD_KBD = 0; - PLD_IO = 0; - PLD_IRDA = 0; - PLD_CODEC = 0; - PLD_TCH = 0; - PLD_SPI = 0; - if (!IS_ENABLED(CONFIG_DEBUG_LL)) { - PLD_COM2 = 0; - PLD_COM1 = 0; - } -} - static struct gpio_led p720t_gpio_leds[] = { { .name = "User LED", @@ -199,7 +334,20 @@ static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = { static void __init p720t_init(void) { + int i; + + clps711x_devices_init(); + + for (i = 0; i < ARRAY_SIZE(mmgpios); i++) + p720t_mmgpio_init(mmgpios[i].addrbase, mmgpios[i].gpiobase); + platform_device_register(&p720t_nand_pdev); +} + +static void __init p720t_init_late(void) +{ + WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios))); + platform_device_register_data(&platform_bus, "platform-lcd", 0, &p720t_lcd_power_pdata, sizeof(p720t_lcd_power_pdata)); @@ -207,10 +355,6 @@ static void __init p720t_init(void) &p720t_lcd_backlight_pdata, sizeof(p720t_lcd_backlight_pdata)); platform_device_register_simple("video-clps711x", 0, NULL, 0); -} - -static void __init p720t_init_late(void) -{ platform_device_register_data(&platform_bus, "leds-gpio", 0, &p720t_gpio_led_pdata, sizeof(p720t_gpio_led_pdata)); @@ -221,8 +365,8 @@ MACHINE_START(P720T, "ARM-Prospector720T") .atag_offset = 0x100, .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_p720t, - .map_io = p720t_map_io, - .init_early = p720t_init_early, + .map_io = clps711x_map_io, + .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .init_machine = p720t_init, diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 20ff50f3ccf..f6d1746366d 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -27,12 +27,14 @@ #include <linux/clk.h> #include <linux/clkdev.h> #include <linux/clockchips.h> +#include <linux/clocksource.h> #include <linux/clk-provider.h> #include <asm/exception.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/sched_clock.h> #include <asm/system_misc.h> #include <mach/hardware.h> @@ -213,7 +215,7 @@ void __init clps711x_init_irq(void) } } -inline u32 fls16(u32 x) +static inline u32 fls16(u32 x) { u32 r = 15; @@ -237,27 +239,52 @@ inline u32 fls16(u32 x) asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs) { - u32 irqstat; - void __iomem *base = CLPS711X_VIRT_BASE; - - irqstat = readl_relaxed(base + INTSR1) & readl_relaxed(base + INTMR1); - if (irqstat) { - handle_IRQ(fls16(irqstat), regs); - return; - } + do { + u32 irqstat; + void __iomem *base = CLPS711X_VIRT_BASE; + + irqstat = readw_relaxed(base + INTSR1) & + readw_relaxed(base + INTMR1); + if (irqstat) + handle_IRQ(fls16(irqstat), regs); + + irqstat = readw_relaxed(base + INTSR2) & + readw_relaxed(base + INTMR2); + if (irqstat) { + handle_IRQ(fls16(irqstat) + 16, regs); + continue; + } + + break; + } while (1); +} - irqstat = readl_relaxed(base + INTSR2) & readl_relaxed(base + INTMR2); - if (likely(irqstat)) - handle_IRQ(fls16(irqstat) + 16, regs); +static u32 notrace clps711x_sched_clock_read(void) +{ + return ~readw_relaxed(CLPS711X_VIRT_BASE + TC1D); } static void clps711x_clockevent_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { + disable_irq(IRQ_TC2OI); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + enable_irq(IRQ_TC2OI); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* Not supported */ + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } } static struct clock_event_device clockevent_clps711x = { - .name = "CLPS711x Clockevents", + .name = "clps711x-clockevent", .rating = 300, .features = CLOCK_EVT_FEAT_PERIODIC, .set_mode = clps711x_clockevent_set_mode, @@ -271,8 +298,8 @@ static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) } static struct irqaction clps711x_timer_irq = { - .name = "CLPS711x Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .name = "clps711x-timer", + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = clps711x_timer_interrupt, }; @@ -301,6 +328,7 @@ void __init clps711x_timer_init(void) cpu = ext; bus = cpu; spi = 135400; + pll = 0; } else { cpu = pll; if (cpu >= 36864000) @@ -319,9 +347,9 @@ void __init clps711x_timer_init(void) else timh = 541440; } else - timh = cpu / 144; + timh = DIV_ROUND_CLOSEST(cpu, 144); - timl = timh / 256; + timl = DIV_ROUND_CLOSEST(timh, 256); /* All clocks are fixed */ add_fixed_clk(clk_pll, "pll", pll); @@ -334,13 +362,24 @@ void __init clps711x_timer_init(void) pr_info("CPU frequency set at %i Hz.\n", cpu); + /* Start Timer1 in free running mode (Low frequency) */ + tmp = clps_readl(SYSCON1) & ~(SYSCON1_TC1S | SYSCON1_TC1M); + clps_writel(tmp, SYSCON1); + + setup_sched_clock(clps711x_sched_clock_read, 16, timl); + + clocksource_mmio_init(CLPS711X_VIRT_BASE + TC1D, + "clps711x_clocksource", timl, 300, 16, + clocksource_mmio_readw_down); + + /* Set Timer2 prescaler */ clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D); - tmp = clps_readl(SYSCON1); - tmp |= SYSCON1_TC2S | SYSCON1_TC2M; + /* Start Timer2 in prescale mode (High frequency)*/ + tmp = clps_readl(SYSCON1) | SYSCON1_TC2M | SYSCON1_TC2S; clps_writel(tmp, SYSCON1); - clockevents_config_and_register(&clockevent_clps711x, timh, 1, 0xffff); + clockevents_config_and_register(&clockevent_clps711x, timh, 0, 0); setup_irq(IRQ_TC2OI, &clps711x_timer_irq); } @@ -353,15 +392,11 @@ void clps711x_restart(char mode, const char *cmd) static void clps711x_idle(void) { clps_writel(1, HALT); - __asm__ __volatile__( - "mov r0, r0\n\ - mov r0, r0"); + asm("mov r0, r0"); + asm("mov r0, r0"); } -static int __init clps711x_idle_init(void) +void __init clps711x_init_early(void) { arm_pm_idle = clps711x_idle; - return 0; } - -arch_initcall(clps711x_idle_init); diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index f84a7292c70..2a22f4c6cc7 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -13,3 +13,4 @@ extern void clps711x_init_irq(void); extern void clps711x_timer_init(void); extern void clps711x_handle_irq(struct pt_regs *regs); extern void clps711x_restart(char mode, const char *cmd); +extern void clps711x_init_early(void); diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c new file mode 100644 index 00000000000..856b81cf2f8 --- /dev/null +++ b/arch/arm/mach-clps711x/devices.c @@ -0,0 +1,68 @@ +/* + * CLPS711X common devices definitions + * + * Author: Alexander Shiyan <shc_work@mail.ru>, 2013 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/platform_device.h> +#include <linux/sizes.h> + +#include <mach/hardware.h> + +static const phys_addr_t clps711x_gpios[][2] __initconst = { + { PADR, PADDR }, + { PBDR, PBDDR }, + { PCDR, PCDDR }, + { PDDR, PDDDR }, + { PEDR, PEDDR }, +}; + +static void __init clps711x_add_gpio(void) +{ + unsigned i; + struct resource gpio_res[2]; + + memset(gpio_res, 0, sizeof(gpio_res)); + + gpio_res[0].flags = IORESOURCE_MEM; + gpio_res[1].flags = IORESOURCE_MEM; + + for (i = 0; i < ARRAY_SIZE(clps711x_gpios); i++) { + gpio_res[0].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][0]; + gpio_res[0].end = gpio_res[0].start; + gpio_res[1].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][1]; + gpio_res[1].end = gpio_res[1].start; + + platform_device_register_simple("clps711x-gpio", i, + gpio_res, ARRAY_SIZE(gpio_res)); + } +} + +const struct resource clps711x_syscon_res[] __initconst = { + /* SYSCON1, SYSFLG1 */ + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON1, SZ_128), + /* SYSCON2, SYSFLG2 */ + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON2, SZ_128), + /* SYSCON3 */ + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON3, SZ_64), +}; + +static void __init clps711x_add_syscon(void) +{ + unsigned i; + + for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++) + platform_device_register_simple("clps711x-syscon", i + 1, + &clps711x_syscon_res[i], 1); +} + +void __init clps711x_devices_init(void) +{ + clps711x_add_gpio(); + clps711x_add_syscon(); +} diff --git a/arch/arm/mach-clps711x/devices.h b/arch/arm/mach-clps711x/devices.h new file mode 100644 index 00000000000..a5efc1744b8 --- /dev/null +++ b/arch/arm/mach-clps711x/devices.h @@ -0,0 +1,12 @@ +/* + * CLPS711X common devices definitions + * + * Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +void clps711x_devices_init(void); diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h deleted file mode 100644 index 0452f5f3f03..00000000000 --- a/arch/arm/mach-clps711x/include/mach/autcpu12.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * AUTCPU12 specific defines - * - * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_AUTCPU12_H -#define __ASM_ARCH_AUTCPU12_H - -/* - * The flash bank is wired to chip select 0 - */ -#define AUTCPU12_PHYS_FLASH CS0_PHYS_BASE /* physical */ - -/* offset for device specific information structure */ -#define AUTCPU12_LCDINFO_OFFS (0x00010000) - -/* Videomemory in the internal SRAM (CS 6) */ -#define AUTCPU12_PHYS_VIDEO CS6_PHYS_BASE - -/* -* All special IO's are tied to CS1 -*/ -#define AUTCPU12_PHYS_CHAR_LCD CS1_PHYS_BASE +0x00000000 /* physical */ - -#define AUTCPU12_PHYS_NVRAM CS1_PHYS_BASE +0x02000000 /* physical */ - -#define AUTCPU12_PHYS_CSAUX1 CS1_PHYS_BASE +0x04000000 /* physical */ - -#define AUTCPU12_PHYS_CAN CS1_PHYS_BASE +0x08000000 /* physical */ - -#define AUTCPU12_PHYS_TOUCH CS1_PHYS_BASE +0x0A000000 /* physical */ - -#define AUTCPU12_PHYS_IO CS1_PHYS_BASE +0x0C000000 /* physical */ - -#define AUTCPU12_PHYS_LPT CS1_PHYS_BASE +0x0E000000 /* physical */ - -/* -* defines for lcd contrast -*/ -#define AUTCPU12_DPOT_PORT_OFFSET PEDR -#define AUTCPU12_DPOT_CS (1<<0) -#define AUTCPU12_DPOT_CLK (1<<1) -#define AUTCPU12_DPOT_UD (1<<2) - -#endif diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h index 01d1b955971..0286f4bf994 100644 --- a/arch/arm/mach-clps711x/include/mach/clps711x.h +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -21,6 +21,8 @@ #ifndef __MACH_CLPS711X_H #define __MACH_CLPS711X_H +#include <linux/mfd/syscon/clps711x.h> + #define CLPS711X_PHYS_BASE (0x80000000) #define PADR (0x0000) @@ -96,83 +98,9 @@ #define RANDID2 (0x2708) #define RANDID3 (0x270c) -/* common bits: SYSCON1 / SYSCON2 */ -#define SYSCON_UARTEN (1 << 8) - -#define SYSCON1_KBDSCAN(x) ((x) & 15) -#define SYSCON1_KBDSCANMASK (15) -#define SYSCON1_TC1M (1 << 4) -#define SYSCON1_TC1S (1 << 5) -#define SYSCON1_TC2M (1 << 6) -#define SYSCON1_TC2S (1 << 7) -#define SYSCON1_UART1EN SYSCON_UARTEN -#define SYSCON1_BZTOG (1 << 9) -#define SYSCON1_BZMOD (1 << 10) -#define SYSCON1_DBGEN (1 << 11) -#define SYSCON1_LCDEN (1 << 12) -#define SYSCON1_CDENTX (1 << 13) -#define SYSCON1_CDENRX (1 << 14) -#define SYSCON1_SIREN (1 << 15) -#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) -#define SYSCON1_ADCKSEL_MASK (3 << 16) -#define SYSCON1_EXCKEN (1 << 18) -#define SYSCON1_WAKEDIS (1 << 19) -#define SYSCON1_IRTXM (1 << 20) - -/* common bits: SYSFLG1 / SYSFLG2 */ -#define SYSFLG_UBUSY (1 << 11) -#define SYSFLG_URXFE (1 << 22) -#define SYSFLG_UTXFF (1 << 23) - -#define SYSFLG1_MCDR (1 << 0) -#define SYSFLG1_DCDET (1 << 1) -#define SYSFLG1_WUDR (1 << 2) -#define SYSFLG1_WUON (1 << 3) -#define SYSFLG1_CTS (1 << 8) -#define SYSFLG1_DSR (1 << 9) -#define SYSFLG1_DCD (1 << 10) -#define SYSFLG1_UBUSY SYSFLG_UBUSY -#define SYSFLG1_NBFLG (1 << 12) -#define SYSFLG1_RSTFLG (1 << 13) -#define SYSFLG1_PFFLG (1 << 14) -#define SYSFLG1_CLDFLG (1 << 15) -#define SYSFLG1_URXFE SYSFLG_URXFE -#define SYSFLG1_UTXFF SYSFLG_UTXFF -#define SYSFLG1_CRXFE (1 << 24) -#define SYSFLG1_CTXFF (1 << 25) -#define SYSFLG1_SSIBUSY (1 << 26) -#define SYSFLG1_ID (1 << 29) -#define SYSFLG1_VERID(x) (((x) >> 30) & 3) -#define SYSFLG1_VERID_MASK (3 << 30) - -#define SYSFLG2_SSRXOF (1 << 0) -#define SYSFLG2_RESVAL (1 << 1) -#define SYSFLG2_RESFRM (1 << 2) -#define SYSFLG2_SS2RXFE (1 << 3) -#define SYSFLG2_SS2TXFF (1 << 4) -#define SYSFLG2_SS2TXUF (1 << 5) -#define SYSFLG2_CKMODE (1 << 6) -#define SYSFLG2_UBUSY SYSFLG_UBUSY -#define SYSFLG2_URXFE SYSFLG_URXFE -#define SYSFLG2_UTXFF SYSFLG_UTXFF - #define LCDCON_GSEN (1 << 30) #define LCDCON_GSMD (1 << 31) -#define SYSCON2_SERSEL (1 << 0) -#define SYSCON2_KBD6 (1 << 1) -#define SYSCON2_DRAMZ (1 << 2) -#define SYSCON2_KBWEN (1 << 3) -#define SYSCON2_SS2TXEN (1 << 4) -#define SYSCON2_PCCARD1 (1 << 5) -#define SYSCON2_PCCARD2 (1 << 6) -#define SYSCON2_SS2RXEN (1 << 7) -#define SYSCON2_UART2EN SYSCON_UARTEN -#define SYSCON2_SS2MAEN (1 << 9) -#define SYSCON2_OSTB (1 << 12) -#define SYSCON2_CLKENSL (1 << 13) -#define SYSCON2_BUZFREQ (1 << 14) - /* common bits: UARTDR1 / UARTDR2 */ #define UARTDR_FRMERR (1 << 8) #define UARTDR_PARERR (1 << 9) @@ -228,18 +156,6 @@ #define DAI64FS_MCLK256EN (1 << 3) #define DAI64FS_LOOPBACK (1 << 5) -#define SYSCON3_ADCCON (1 << 0) -#define SYSCON3_CLKCTL0 (1 << 1) -#define SYSCON3_CLKCTL1 (1 << 2) -#define SYSCON3_DAISEL (1 << 3) -#define SYSCON3_ADCCKNSEN (1 << 4) -#define SYSCON3_VERSN(x) (((x) >> 5) & 7) -#define SYSCON3_VERSN_MASK (7 << 5) -#define SYSCON3_FASTWAKE (1 << 8) -#define SYSCON3_DAIEN (1 << 9) -#define SYSCON3_128FS SYSCON3_DAIEN -#define SYSCON3_ENPD67 (1 << 10) - #define SDCONF_ACTIVE (1 << 10) #define SDCONF_CLKCTL (1 << 9) #define SDCONF_WIDTH_4 (0 << 7) diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 2f23dd5d73e..c5a8ea6839e 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -70,11 +70,4 @@ #define CLPS711X_SDRAM0_BASE (0xc0000000) #define CLPS711X_SDRAM1_BASE (0xd0000000) -#if defined (CONFIG_ARCH_EDB7211) - -/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */ -#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE - -#endif /* CONFIG_ARCH_EDB7211 */ - #endif diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h deleted file mode 100644 index fc0e028d940..00000000000 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/memory.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0xc0000000) - -/* - * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211 - * uses only one of the two banks (bank #1). However, even within - * bank #1, memory is discontiguous. - * - * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between - * them, so we use 24 for the node max shift to get 16MB node sizes. - */ - -#define SECTION_SIZE_BITS 24 -#define MAX_PHYSMEM_BITS 32 - -#endif - diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h deleted file mode 100644 index 9a433155bf5..00000000000 --- a/arch/arm/mach-clps711x/include/mach/syspld.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/syspld.h - * - * System Control PLD register definitions. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSPLD_H -#define __ASM_ARCH_SYSPLD_H - -#define SYSPLD_PHYS_BASE (0x10000000) -#define SYSPLD_VIRT_BASE IO_ADDRESS(SYSPLD_PHYS_BASE) - -#define SYSPLD_REG(type, off) (*(volatile type *)(SYSPLD_VIRT_BASE + (off))) - -#define PLD_INT SYSPLD_REG(u32, 0x000000) -#define PLD_INT_PENIRQ (1 << 5) -#define PLD_INT_UCB_IRQ (1 << 1) -#define PLD_INT_KBD_ATN (1 << 0) /* EINT1 */ - -#define PLD_PWR SYSPLD_REG(u32, 0x000004) -#define PLD_PWR_EXT (1 << 5) -#define PLD_PWR_MODE (1 << 4) /* 1 = PWM, 0 = PFM */ -#define PLD_S4_ON (1 << 3) /* LCD bias voltage enable */ -#define PLD_S3_ON (1 << 2) /* LCD backlight enable */ -#define PLD_S2_ON (1 << 1) /* LCD 3V3 supply enable */ -#define PLD_S1_ON (1 << 0) /* LCD 3V supply enable */ - -#define PLD_KBD SYSPLD_REG(u32, 0x000008) -#define PLD_KBD_WAKE (1 << 1) -#define PLD_KBD_EN (1 << 0) - -#define PLD_SPI SYSPLD_REG(u32, 0x00000c) -#define PLD_SPI_EN (1 << 0) - -#define PLD_IO SYSPLD_REG(u32, 0x000010) -#define PLD_IO_BOOTSEL (1 << 6) /* boot sel switch */ -#define PLD_IO_USER (1 << 5) /* user defined switch */ -#define PLD_IO_LED3 (1 << 4) -#define PLD_IO_LED2 (1 << 3) -#define PLD_IO_LED1 (1 << 2) -#define PLD_IO_LED0 (1 << 1) -#define PLD_IO_LEDEN (1 << 0) - -#define PLD_IRDA SYSPLD_REG(u32, 0x000014) -#define PLD_IRDA_EN (1 << 0) - -#define PLD_COM2 SYSPLD_REG(u32, 0x000018) -#define PLD_COM2_EN (1 << 0) - -#define PLD_COM1 SYSPLD_REG(u32, 0x00001c) -#define PLD_COM1_EN (1 << 0) - -#define PLD_AUD SYSPLD_REG(u32, 0x000020) -#define PLD_AUD_DIV1 (1 << 6) -#define PLD_AUD_DIV0 (1 << 5) -#define PLD_AUD_CLK_SEL1 (1 << 4) -#define PLD_AUD_CLK_SEL0 (1 << 3) -#define PLD_AUD_MIC_PWR (1 << 2) -#define PLD_AUD_MIC_GAIN (1 << 1) -#define PLD_AUD_CODEC_EN (1 << 0) - -#define PLD_CF SYSPLD_REG(u32, 0x000024) -#define PLD_CF2_SLEEP (1 << 5) -#define PLD_CF1_SLEEP (1 << 4) -#define PLD_CF2_nPDREQ (1 << 3) -#define PLD_CF1_nPDREQ (1 << 2) -#define PLD_CF2_nIRQ (1 << 1) -#define PLD_CF1_nIRQ (1 << 0) - -#define PLD_SDC SYSPLD_REG(u32, 0x000028) -#define PLD_SDC_INT_EN (1 << 2) -#define PLD_SDC_WP (1 << 1) -#define PLD_SDC_CD (1 << 0) - -#define PLD_FPGA SYSPLD_REG(u32, 0x00002c) - -#define PLD_CODEC SYSPLD_REG(u32, 0x400000) -#define PLD_CODEC_IRQ3 (1 << 4) -#define PLD_CODEC_IRQ2 (1 << 3) -#define PLD_CODEC_IRQ1 (1 << 2) -#define PLD_CODEC_EN (1 << 0) - -#define PLD_BRITE SYSPLD_REG(u32, 0x400004) -#define PLD_BRITE_UP (1 << 1) -#define PLD_BRITE_DN (1 << 0) - -#define PLD_LCDEN SYSPLD_REG(u32, 0x400008) -#define PLD_LCDEN_EN (1 << 0) - -#define PLD_ID SYSPLD_REG(u32, 0x40000c) - -#define PLD_TCH SYSPLD_REG(u32, 0x400010) -#define PLD_TCH_PENIRQ (1 << 1) -#define PLD_TCH_EN (1 << 0) - -#define PLD_GPIO SYSPLD_REG(u32, 0x400014) -#define PLD_GPIO2 (1 << 2) -#define PLD_GPIO1 (1 << 1) -#define PLD_GPIO0 (1 << 0) - -#endif diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index dd1ffccc75e..63997a1128e 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o clock.o serial.o psc.o \ - dma.o usb.o common.o sram.o aemif.o + usb.o common.o sram.o aemif.o obj-$(CONFIG_DAVINCI_MUX) += mux.o diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index ba798370fc9..78ea395d2ac 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -26,12 +26,12 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> +#include <linux/platform_data/edma.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <mach/irqs.h> -#include <mach/edma.h> #include <mach/mux.h> #include <mach/cp_intc.h> #include <mach/tnetv107x.h> diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 1ab3df423da..a883043d082 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -23,9 +23,9 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/platform_data/davinci_asp.h> +#include <linux/platform_data/edma.h> #include <linux/platform_data/keyscan-davinci.h> #include <mach/hardware.h> -#include <mach/edma.h> #include <media/davinci/vpfe_capture.h> #include <media/davinci/vpif_types.h> @@ -77,32 +77,32 @@ void davinci_map_sysmod(void); #define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000 /* DM355 function declarations */ -void __init dm355_init(void); +void dm355_init(void); void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); -void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); +void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); int dm355_init_video(struct vpfe_config *, struct vpbe_config *); /* DM365 function declarations */ -void __init dm365_init(void); -void __init dm365_init_asp(struct snd_platform_data *pdata); -void __init dm365_init_vc(struct snd_platform_data *pdata); -void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); -void __init dm365_init_rtc(void); +void dm365_init(void); +void dm365_init_asp(struct snd_platform_data *pdata); +void dm365_init_vc(struct snd_platform_data *pdata); +void dm365_init_ks(struct davinci_ks_platform_data *pdata); +void dm365_init_rtc(void); void dm365_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); int dm365_init_video(struct vpfe_config *, struct vpbe_config *); /* DM644x function declarations */ -void __init dm644x_init(void); -void __init dm644x_init_asp(struct snd_platform_data *pdata); -int __init dm644x_init_video(struct vpfe_config *, struct vpbe_config *); +void dm644x_init(void); +void dm644x_init_asp(struct snd_platform_data *pdata); +int dm644x_init_video(struct vpfe_config *, struct vpbe_config *); /* DM646x function declarations */ -void __init dm646x_init(void); -void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); -void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); -int __init dm646x_init_edma(struct edma_rsv_info *rsv); +void dm646x_init(void); +void dm646x_init_mcasp0(struct snd_platform_data *pdata); +void dm646x_init_mcasp1(struct snd_platform_data *pdata); +int dm646x_init_edma(struct edma_rsv_info *rsv); void dm646x_video_init(void); void dm646x_setup_vpif(struct vpif_display_config *, struct vpif_capture_config *); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index bf572525175..eb254fe861a 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -105,27 +105,27 @@ struct platform_device da8xx_serial_device = { }, }; -static const s8 da8xx_queue_tc_mapping[][2] = { +static s8 da8xx_queue_tc_mapping[][2] = { /* {event queue no, TC no} */ {0, 0}, {1, 1}, {-1, -1} }; -static const s8 da8xx_queue_priority_mapping[][2] = { +static s8 da8xx_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, {1, 7}, {-1, -1} }; -static const s8 da850_queue_tc_mapping[][2] = { +static s8 da850_queue_tc_mapping[][2] = { /* {event queue no, TC no} */ {0, 0}, {-1, -1} }; -static const s8 da850_queue_priority_mapping[][2] = { +static s8 da850_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, {-1, -1} diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index cfb194df18e..128cb9ae80f 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -18,10 +18,10 @@ #include <linux/dma-mapping.h> #include <linux/clk.h> #include <linux/slab.h> +#include <linux/platform_data/edma.h> #include <mach/common.h> #include <mach/irqs.h> -#include <mach/edma.h> #include <mach/tnetv107x.h> #include "clock.h" @@ -58,14 +58,14 @@ #define TNETV107X_DMACH_SDIO1_RX 28 #define TNETV107X_DMACH_SDIO1_TX 29 -static const s8 edma_tc_mapping[][2] = { +static s8 edma_tc_mapping[][2] = { /* event queue no TC no */ { 0, 0 }, { 1, 1 }, { -1, -1 } }; -static const s8 edma_priority_mapping[][2] = { +static s8 edma_priority_mapping[][2] = { /* event queue no Prio */ { 0, 3 }, { 1, 7 }, diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index a7068a3aa9d..90b83d00fe2 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -19,9 +19,10 @@ #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/mux.h> -#include <mach/edma.h> #include <linux/platform_data/mmc-davinci.h> #include <mach/time.h> +#include <linux/platform_data/edma.h> + #include "davinci.h" #include "clock.h" @@ -34,6 +35,9 @@ #define DM365_MMCSD0_BASE 0x01D11000 #define DM365_MMCSD1_BASE 0x01D00000 +#define DAVINCI_DMA_MMCRXEVT 26 +#define DAVINCI_DMA_MMCTXEVT 27 + void __iomem *davinci_sysmod_base; void davinci_map_sysmod(void) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a11034a358f..42ef53f62c6 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -19,7 +19,6 @@ #include <asm/mach/map.h> #include <mach/cputype.h> -#include <mach/edma.h> #include <mach/psc.h> #include <mach/mux.h> #include <mach/irqs.h> @@ -28,6 +27,7 @@ #include <mach/common.h> #include <linux/platform_data/spi-davinci.h> #include <mach/gpio-davinci.h> +#include <linux/platform_data/edma.h> #include "davinci.h" #include "clock.h" @@ -569,7 +569,7 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static const s8 +static s8 queue_tc_mapping[][2] = { /* {event queue no, TC no} */ {0, 0}, @@ -577,7 +577,7 @@ queue_tc_mapping[][2] = { {-1, -1}, }; -static const s8 +static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 40fa4fee933..fa7af5eda52 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -18,11 +18,11 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/spi/spi.h> +#include <linux/platform_data/edma.h> #include <asm/mach/map.h> #include <mach/cputype.h> -#include <mach/edma.h> #include <mach/psc.h> #include <mach/mux.h> #include <mach/irqs.h> @@ -826,7 +826,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { }; /* Four Transfer Controllers on DM365 */ -static const s8 +static s8 dm365_queue_tc_mapping[][2] = { /* {event queue no, TC no} */ {0, 0}, @@ -836,7 +836,7 @@ dm365_queue_tc_mapping[][2] = { {-1, -1}, }; -static const s8 +static s8 dm365_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 7}, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 4d37d3e2a19..a49d18246fe 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -12,11 +12,11 @@ #include <linux/clk.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> +#include <linux/platform_data/edma.h> #include <asm/mach/map.h> #include <mach/cputype.h> -#include <mach/edma.h> #include <mach/irqs.h> #include <mach/psc.h> #include <mach/mux.h> @@ -497,7 +497,7 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static const s8 +static s8 queue_tc_mapping[][2] = { /* {event queue no, TC no} */ {0, 0}, @@ -505,7 +505,7 @@ queue_tc_mapping[][2] = { {-1, -1}, }; -static const s8 +static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index ac7b431c4c8..d1259e80141 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -13,11 +13,11 @@ #include <linux/clk.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> +#include <linux/platform_data/edma.h> #include <asm/mach/map.h> #include <mach/cputype.h> -#include <mach/edma.h> #include <mach/irqs.h> #include <mach/psc.h> #include <mach/mux.h> @@ -531,7 +531,7 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ /* Four Transfer Controllers on DM646x */ -static const s8 +static s8 dm646x_queue_tc_mapping[][2] = { /* {event queue no, TC no} */ {0, 0}, @@ -541,7 +541,7 @@ dm646x_queue_tc_mapping[][2] = { {-1, -1}, }; -static const s8 +static s8 dm646x_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 4}, diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h index d13d8dfa2b0..827bbe9baed 100644 --- a/arch/arm/mach-davinci/include/mach/cp_intc.h +++ b/arch/arm/mach-davinci/include/mach/cp_intc.h @@ -51,7 +51,7 @@ #define CP_INTC_HOST_PRIO_VECTOR(n) (0x1600 + (n << 2)) #define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) -void __init cp_intc_init(void); -int __init cp_intc_of_init(struct device_node *, struct device_node *); +void cp_intc_init(void); +int cp_intc_of_init(struct device_node *, struct device_node *); #endif /* __ASM_HARDWARE_CP_INTC_H */ diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 2e1c9eae0a5..3c797e2272f 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -20,8 +20,8 @@ #include <linux/videodev2.h> #include <mach/serial.h> -#include <mach/edma.h> #include <mach/pm.h> +#include <linux/platform_data/edma.h> #include <linux/platform_data/i2c-davinci.h> #include <linux/platform_data/mmc-davinci.h> #include <linux/platform_data/usb-davinci.h> @@ -79,8 +79,8 @@ extern unsigned int da850_max_speed; #define DA8XX_SHARED_RAM_BASE 0x80000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 -void __init da830_init(void); -void __init da850_init(void); +void da830_init(void); +void da850_init(void); int da830_register_edma(struct edma_rsv_info *rsv); int da850_register_edma(struct edma_rsv_info *rsv[2]); @@ -94,17 +94,17 @@ int da8xx_register_uio_pruss(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); -void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata); +void da8xx_register_mcasp(int id, struct snd_platform_data *pdata); int da8xx_register_rtc(void); int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); -void __iomem * __init da8xx_get_mem_ctlr(void); +void __iomem *da8xx_get_mem_ctlr(void); int da850_register_pm(struct platform_device *pdev); -int __init da850_register_sata(unsigned long refclkpn); -int __init da850_register_vpif(void); -int __init da850_register_vpif_display +int da850_register_sata(unsigned long refclkpn); +int da850_register_vpif(void); +int da850_register_vpif_display (struct vpif_display_config *display_config); -int __init da850_register_vpif_capture +int da850_register_vpif_capture (struct vpif_capture_config *capture_config); void da8xx_restart(char mode, const char *cmd); void da8xx_rproc_reserve_cma(void); diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h index 1656a02e3ed..366e975effa 100644 --- a/arch/arm/mach-davinci/include/mach/tnetv107x.h +++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h @@ -51,9 +51,9 @@ struct tnetv107x_device_info { extern struct platform_device tnetv107x_wdt_device; extern struct platform_device tnetv107x_serial_device; -extern void __init tnetv107x_init(void); -extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *); -extern void __init tnetv107x_irq_init(void); +extern void tnetv107x_init(void); +extern void tnetv107x_devices_init(struct tnetv107x_device_info *); +extern void tnetv107x_irq_init(void); void tnetv107x_restart(char mode, const char *cmd); #endif diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index 36469d81395..dff7b2fd4e2 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -22,8 +22,7 @@ config MACH_CM_A510 config MACH_DOVE_DT bool "Marvell Dove Flattened Device Tree" - select MVEBU_CLK_CORE - select MVEBU_CLK_GATING + select DOVE_CLK select REGULATOR select REGULATOR_FIXED_VOLTAGE select USE_OF diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c index 0b142803b2e..f3755ac8114 100644 --- a/arch/arm/mach-dove/board-dt.c +++ b/arch/arm/mach-dove/board-dt.c @@ -10,7 +10,6 @@ #include <linux/init.h> #include <linux/clk-provider.h> -#include <linux/clk/mvebu.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/platform_data/usb-ehci-orion.h> @@ -49,7 +48,7 @@ static void __init dove_legacy_clk_init(void) static void __init dove_of_clk_init(void) { - mvebu_clocks_init(); + of_clk_init(NULL); dove_legacy_clk_init(); } diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index e2b5da031f9..2a9443d04d9 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -9,7 +9,6 @@ */ #include <linux/clk-provider.h> -#include <linux/clk/mvebu.h> #include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/of.h> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index ff18fc2ea46..0ecd5af2054 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -14,9 +14,11 @@ menu "SAMSUNG EXYNOS SoCs Support" config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" default y + select GIC_NON_BANKED select HAVE_ARM_SCU if SMP select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL help Samsung EXYNOS4 SoCs based systems @@ -24,6 +26,7 @@ config ARCH_EXYNOS5 bool "SAMSUNG EXYNOS5" select HAVE_ARM_SCU if SMP select HAVE_SMP + select PINCTRL help Samsung EXYNOS5 (Cortex-A15) SoC based systems @@ -34,6 +37,7 @@ config CPU_EXYNOS4210 default y depends on ARCH_EXYNOS4 select ARM_CPU_SUSPEND if PM + select PINCTRL_EXYNOS select PM_GENERIC_DOMAINS select S5P_PM if PM select S5P_SLEEP if PM @@ -45,6 +49,7 @@ config SOC_EXYNOS4212 bool "SAMSUNG EXYNOS4212" default y depends on ARCH_EXYNOS4 + select PINCTRL_EXYNOS select S5P_PM if PM select S5P_SLEEP if PM select SAMSUNG_DMADEV @@ -55,6 +60,7 @@ config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y depends on ARCH_EXYNOS4 + select PINCTRL_EXYNOS select SAMSUNG_DMADEV help Enable EXYNOS4412 SoC support @@ -63,6 +69,7 @@ config SOC_EXYNOS5250 bool "SAMSUNG EXYNOS5250" default y depends on ARCH_EXYNOS5 + select PINCTRL_EXYNOS select PM_GENERIC_DOMAINS if PM select S5P_PM if PM select S5P_SLEEP if PM @@ -78,345 +85,25 @@ config SOC_EXYNOS5440 select ARCH_HAS_OPP select ARM_ARCH_TIMER select AUTO_ZRELADDR - select PINCTRL + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI select PINCTRL_EXYNOS5440 select PM_OPP help Enable EXYNOS5440 SoC support -config EXYNOS_ATAGS - bool "ATAGS based boot for EXYNOS (deprecated)" - depends on !ARCH_MULTIPLATFORM - depends on ATAGS - default y - help - The EXYNOS platform is moving towards being completely probed - through device tree. This enables support for board files using - the traditional ATAGS boot format. - Note that this option is not available for multiplatform builds. - -if EXYNOS_ATAGS - -config EXYNOS_DEV_DMA - bool - help - Compile in amba device definitions for DMA controller - -config EXYNOS4_DEV_AHCI - bool - help - Compile in platform device definitions for AHCI - -config EXYNOS4_SETUP_FIMD0 - bool - help - Common setup code for FIMD0. - -config EXYNOS4_DEV_USB_OHCI - bool - help - Compile in platform device definition for USB OHCI - -config EXYNOS4_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config EXYNOS4_SETUP_I2C2 - bool - help - Common setup code for i2c bus 2. - -config EXYNOS4_SETUP_I2C3 - bool - help - Common setup code for i2c bus 3. - -config EXYNOS4_SETUP_I2C4 - bool - help - Common setup code for i2c bus 4. - -config EXYNOS4_SETUP_I2C5 - bool - help - Common setup code for i2c bus 5. - -config EXYNOS4_SETUP_I2C6 - bool - help - Common setup code for i2c bus 6. - -config EXYNOS4_SETUP_I2C7 - bool - help - Common setup code for i2c bus 7. - -config EXYNOS4_SETUP_KEYPAD - bool - help - Common setup code for keypad. - -config EXYNOS4_SETUP_SDHCI - bool - select EXYNOS4_SETUP_SDHCI_GPIO - help - Internal helper functions for EXYNOS4 based SDHCI systems. - -config EXYNOS4_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -config EXYNOS4_SETUP_FIMC - bool - help - Common setup code for the camera interfaces. - -config EXYNOS4_SETUP_USB_PHY - bool - help - Common setup code for USB PHY controller - -config EXYNOS_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations. - -# machine support - -if ARCH_EXYNOS4 - -comment "EXYNOS4210 Boards" - -config MACH_SMDKC210 - bool "SMDKC210" - select MACH_SMDKV310 - help - Machine support for Samsung SMDKC210 - -config MACH_SMDKV310 - bool "SMDKV310" - select CPU_EXYNOS4210 - select EXYNOS4_DEV_AHCI - select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_KEYPAD - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C24XX_PWM - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_I2C_HDMIPHY - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_TV - select S5P_DEV_USB_EHCI - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - help - Machine support for Samsung SMDKV310 - -config MACH_ARMLEX4210 - bool "ARMLEX4210" - select CPU_EXYNOS4210 - select EXYNOS4_DEV_AHCI - select EXYNOS4_SETUP_SDHCI - select EXYNOS_DEV_DMA - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_RTC - select S3C_DEV_WDT - help - Machine support for Samsung ARMLEX4210 based on EXYNOS4210 - -config MACH_UNIVERSAL_C210 - bool "Mobile UNIVERSAL_C210 Board" - select CLKSRC_MMIO - select CLKSRC_SAMSUNG_PWM - select CPU_EXYNOS4210 - select EXYNOS4_SETUP_FIMC - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C5 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C3 - select S3C_DEV_I2C5 - select S3C_DEV_USB_HSOTG - select S5P_DEV_CSIS0 - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_I2C_HDMIPHY - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_ONENAND - select S5P_DEV_TV - select S5P_GPIO_INT - select S5P_SETUP_MIPIPHY - help - Machine support for Samsung Mobile Universal S5PC210 Reference - Board. - -config MACH_NURI - bool "Mobile NURI Board" - select CPU_EXYNOS4210 - select EXYNOS4_SETUP_FIMC - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C5 - select EXYNOS4_SETUP_I2C6 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C3 - select S3C_DEV_I2C5 - select S3C_DEV_I2C6 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_CSIS0 - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_USB_EHCI - select S5P_GPIO_INT - select S5P_SETUP_MIPIPHY - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_PWM - help - Machine support for Samsung Mobile NURI Board. - -config MACH_ORIGEN - bool "ORIGEN" - select CPU_EXYNOS4210 - select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C24XX_PWM - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_I2C_HDMIPHY - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_TV - select S5P_DEV_USB_EHCI - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_PWM - help - Machine support for ORIGEN based on Samsung EXYNOS4210 - -comment "EXYNOS4212 Boards" - -config MACH_SMDK4212 - bool "SMDK4212" - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C7 - select EXYNOS4_SETUP_KEYPAD - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C24XX_PWM - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C3 - select S3C_DEV_I2C7 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_MFC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SOC_EXYNOS4212 - help - Machine support for Samsung SMDK4212 - -comment "EXYNOS4412 Boards" - -config MACH_SMDK4412 - bool "SMDK4412" - select MACH_SMDK4212 - select SOC_EXYNOS4412 - help - Machine support for Samsung SMDK4412 -endif - -endif - comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" + default y depends on ARCH_EXYNOS4 select ARM_AMBA select CLKSRC_OF select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select KEYBOARD_SAMSUNG if INPUT_KEYBOARD - select PINCTRL - select PINCTRL_EXYNOS select S5P_DEV_MFC - select USE_OF help Machine support for Samsung Exynos4 machine with device tree enabled. Select this if a fdt blob is available for the Exynos4 SoC based board. @@ -429,28 +116,11 @@ config MACH_EXYNOS5_DT depends on ARCH_EXYNOS5 select ARM_AMBA select CLKSRC_OF - select USE_OF + select USB_ARCH_HAS_XHCI help Machine support for Samsung EXYNOS5 machine with device tree enabled. Select this if a fdt blob is available for the EXYNOS5 SoC based board. -if ARCH_EXYNOS4 - -comment "Configuration for HSMMC 8-bit bus width" - -config EXYNOS4_SDHCI_CH0_8BIT - bool "Channel 0 with 8-bit bus" - help - Support HSMMC Channel 0 8-bit bus. - If selected, Channel 1 is disabled. - -config EXYNOS4_SDHCI_CH2_8BIT - bool "Channel 2 with 8-bit bus" - help - Support HSMMC Channel 2 8-bit bus. - If selected, Channel 3 is disabled. -endif - endmenu endif diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index b09b027178f..e970a7a4e27 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -32,38 +32,5 @@ AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) # machine support -obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o -obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o -obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o -obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o -obj-$(CONFIG_MACH_NURI) += mach-nuri.o -obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o - -obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o -obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o - obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o - -# device support - -obj-y += dev-uart.o -obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o -obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o -obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o -obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o - -obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o -obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o -obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o -obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o -obj-$(CONFIG_EXYNOS_SETUP_SPI) += setup-spi.o diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index f7e504b7874..81e6320ca09 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -40,20 +40,9 @@ #include <mach/regs-irq.h> #include <mach/regs-pmu.h> -#include <mach/regs-gpio.h> -#include <mach/irqs.h> #include <plat/cpu.h> -#include <plat/devs.h> #include <plat/pm.h> -#include <plat/sdhci.h> -#include <plat/gpio-cfg.h> -#include <plat/adc-core.h> -#include <plat/fb-core.h> -#include <plat/fimc-core.h> -#include <plat/iic-core.h> -#include <plat/tv-core.h> -#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -69,31 +58,25 @@ static const char name_exynos5440[] = "EXYNOS5440"; static void exynos4_map_io(void); static void exynos5_map_io(void); static void exynos5440_map_io(void); -static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); static int exynos_init(void); -unsigned long xxti_f = 0, xusbxti_f = 0; - static struct cpu_table cpu_ids[] __initdata = { { .idcode = EXYNOS4210_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4210, }, { .idcode = EXYNOS4212_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4212, }, { .idcode = EXYNOS4412_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4412, }, { @@ -113,15 +96,6 @@ static struct cpu_table cpu_ids[] __initdata = { /* Initial IO mappings */ -static struct map_desc exynos_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(EXYNOS_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - static struct map_desc exynos4_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -304,13 +278,6 @@ static struct map_desc exynos5440_iodesc0[] __initdata = { }, }; -static struct samsung_pwm_variant exynos4_pwm_variant = { - .bits = 32, - .div_base = 0, - .has_tint_cstat = true, - .tclk_mask = 0, -}; - void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -353,8 +320,7 @@ void __init exynos_init_late(void) exynos_pm_late_initcall(); } -#ifdef CONFIG_OF -int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, +static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, int depth, void *data) { struct map_desc iodesc; @@ -376,7 +342,6 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, iotable_init(&iodesc, 1); return 1; } -#endif /* * exynos_map_io @@ -384,19 +349,11 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, * register the standard cpu IO areas */ -void __init exynos_init_io(struct map_desc *mach_desc, int size) +void __init exynos_init_io(void) { debug_ll_io_init(); -#ifdef CONFIG_OF - if (initial_boot_params) - of_scan_flat_dt(exynos_fdt_map_chipid, NULL); - else -#endif - iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc)); - - if (mach_desc) - iotable_init(mach_desc, size); + of_scan_flat_dt(exynos_fdt_map_chipid, NULL); /* detect cpu id and rev. */ s5p_init_cpu(S5P_VA_CHIPID); @@ -417,34 +374,6 @@ static void __init exynos4_map_io(void) iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); if (soc_is_exynos4212() || soc_is_exynos4412()) iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); - - /* initialize device information early */ - exynos4_default_sdhci0(); - exynos4_default_sdhci1(); - exynos4_default_sdhci2(); - exynos4_default_sdhci3(); - - s3c_adc_setname("samsung-adc-v3"); - - s3c_fimc_setname(0, "exynos4-fimc"); - s3c_fimc_setname(1, "exynos4-fimc"); - s3c_fimc_setname(2, "exynos4-fimc"); - s3c_fimc_setname(3, "exynos4-fimc"); - - s3c_sdhci_setname(0, "exynos4-sdhci"); - s3c_sdhci_setname(1, "exynos4-sdhci"); - s3c_sdhci_setname(2, "exynos4-sdhci"); - s3c_sdhci_setname(3, "exynos4-sdhci"); - - /* The I2C bus controllers are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - s3c_i2c2_setname("s3c2440-i2c"); - - s5p_fb_setname(0, "exynos4-fb"); - s5p_hdmi_setname("exynos4-hdmi"); - - s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos5_map_io(void) @@ -460,81 +389,10 @@ static void __init exynos5440_map_io(void) iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } -void __init exynos_set_timer_source(u8 channels) -{ - exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; - exynos4_pwm_variant.output_mask &= ~channels; -} - void __init exynos_init_time(void) { - unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { - EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC, - EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC, - EXYNOS4_IRQ_TIMER4_VIC, - }; - - if (of_have_populated_dt()) { -#ifdef CONFIG_OF - of_clk_init(NULL); - clocksource_of_init(); -#endif - } else { - /* todo: remove after migrating legacy E4 platforms to dt */ -#ifdef CONFIG_ARCH_EXYNOS4 - exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1); - exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); -#endif -#ifdef CONFIG_CLKSRC_SAMSUNG_PWM - if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) - samsung_pwm_clocksource_init(S3C_VA_TIMER, - timer_irqs, &exynos4_pwm_variant); - else -#endif - mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, - EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); - } -} - -static unsigned int max_combiner_nr(void) -{ - if (soc_is_exynos5250()) - return EXYNOS5_MAX_COMBINER_NR; - else if (soc_is_exynos4412()) - return EXYNOS4412_MAX_COMBINER_NR; - else if (soc_is_exynos4212()) - return EXYNOS4212_MAX_COMBINER_NR; - else - return EXYNOS4210_MAX_COMBINER_NR; -} - - -void __init exynos4_init_irq(void) -{ - unsigned int gic_bank_offset; - - gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; - - if (!of_have_populated_dt()) - gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL); -#ifdef CONFIG_OF - else - irqchip_init(); -#endif - - if (!of_have_populated_dt()) - combiner_init(S5P_VA_COMBINER_BASE, NULL, - max_combiner_nr(), COMBINER_IRQ(0, 0)); - - gic_arch_extn.irq_set_wake = s3c_irq_wake; -} - -void __init exynos5_init_irq(void) -{ -#ifdef CONFIG_OF - irqchip_init(); -#endif - gic_arch_extn.irq_set_wake = s3c_irq_wake; + of_clk_init(NULL); + clocksource_of_init(); } struct bus_type exynos_subsys = { @@ -552,59 +410,19 @@ static int __init exynos_core_init(void) } core_initcall(exynos_core_init); -#ifdef CONFIG_CACHE_L2X0 static int __init exynos4_l2x0_cache_init(void) { int ret; - if (soc_is_exynos5250() || soc_is_exynos5440()) - return 0; - ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); - if (!ret) { - l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); - clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); - return 0; - } - - if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) { - l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC; - /* TAG, Data Latency Control: 2 cycles */ - l2x0_saved_regs.tag_latency = 0x110; - - if (soc_is_exynos4212() || soc_is_exynos4412()) - l2x0_saved_regs.data_latency = 0x120; - else - l2x0_saved_regs.data_latency = 0x110; - - l2x0_saved_regs.prefetch_ctrl = 0x30000007; - l2x0_saved_regs.pwr_ctrl = - (L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN); - - l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); + if (ret) + return ret; - __raw_writel(l2x0_saved_regs.tag_latency, - S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); - __raw_writel(l2x0_saved_regs.data_latency, - S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); - - /* L2X0 Prefetch Control */ - __raw_writel(l2x0_saved_regs.prefetch_ctrl, - S5P_VA_L2CC + L2X0_PREFETCH_CTRL); - - /* L2X0 Power Control */ - __raw_writel(l2x0_saved_regs.pwr_ctrl, - S5P_VA_L2CC + L2X0_POWER_CTRL); - - clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); - clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs)); - } - - l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK); + l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); + clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); return 0; } early_initcall(exynos4_l2x0_cache_init); -#endif static int __init exynos_init(void) { @@ -612,350 +430,3 @@ static int __init exynos_init(void) return device_register(&exynos4_dev); } - -/* uart registration process */ - -static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) - tcfg->has_fracval = 1; - - s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); -} - -static void __iomem *exynos_eint_base; - -static DEFINE_SPINLOCK(eint_lock); - -static unsigned int eint0_15_data[16]; - -static inline int exynos4_irq_to_gpio(unsigned int irq) -{ - if (irq < IRQ_EINT(0)) - return -EINVAL; - - irq -= IRQ_EINT(0); - if (irq < 8) - return EXYNOS4_GPX0(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS4_GPX1(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS4_GPX2(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS4_GPX3(irq); - - return -EINVAL; -} - -static inline int exynos5_irq_to_gpio(unsigned int irq) -{ - if (irq < IRQ_EINT(0)) - return -EINVAL; - - irq -= IRQ_EINT(0); - if (irq < 8) - return EXYNOS5_GPX0(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS5_GPX1(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS5_GPX2(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS5_GPX3(irq); - - return -EINVAL; -} - -static unsigned int exynos4_eint0_15_src_int[16] = { - EXYNOS4_IRQ_EINT0, - EXYNOS4_IRQ_EINT1, - EXYNOS4_IRQ_EINT2, - EXYNOS4_IRQ_EINT3, - EXYNOS4_IRQ_EINT4, - EXYNOS4_IRQ_EINT5, - EXYNOS4_IRQ_EINT6, - EXYNOS4_IRQ_EINT7, - EXYNOS4_IRQ_EINT8, - EXYNOS4_IRQ_EINT9, - EXYNOS4_IRQ_EINT10, - EXYNOS4_IRQ_EINT11, - EXYNOS4_IRQ_EINT12, - EXYNOS4_IRQ_EINT13, - EXYNOS4_IRQ_EINT14, - EXYNOS4_IRQ_EINT15, -}; - -static unsigned int exynos5_eint0_15_src_int[16] = { - EXYNOS5_IRQ_EINT0, - EXYNOS5_IRQ_EINT1, - EXYNOS5_IRQ_EINT2, - EXYNOS5_IRQ_EINT3, - EXYNOS5_IRQ_EINT4, - EXYNOS5_IRQ_EINT5, - EXYNOS5_IRQ_EINT6, - EXYNOS5_IRQ_EINT7, - EXYNOS5_IRQ_EINT8, - EXYNOS5_IRQ_EINT9, - EXYNOS5_IRQ_EINT10, - EXYNOS5_IRQ_EINT11, - EXYNOS5_IRQ_EINT12, - EXYNOS5_IRQ_EINT13, - EXYNOS5_IRQ_EINT14, - EXYNOS5_IRQ_EINT15, -}; -static inline void exynos_irq_eint_mask(struct irq_data *data) -{ - u32 mask; - - spin_lock(&eint_lock); - mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq)); - mask |= EINT_OFFSET_BIT(data->irq); - __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq)); - spin_unlock(&eint_lock); -} - -static void exynos_irq_eint_unmask(struct irq_data *data) -{ - u32 mask; - - spin_lock(&eint_lock); - mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq)); - mask &= ~(EINT_OFFSET_BIT(data->irq)); - __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq)); - spin_unlock(&eint_lock); -} - -static inline void exynos_irq_eint_ack(struct irq_data *data) -{ - __raw_writel(EINT_OFFSET_BIT(data->irq), - EINT_PEND(exynos_eint_base, data->irq)); -} - -static void exynos_irq_eint_maskack(struct irq_data *data) -{ - exynos_irq_eint_mask(data); - exynos_irq_eint_ack(data); -} - -static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = EINT_OFFSET(data->irq); - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - newvalue = S5P_IRQ_TYPE_EDGE_RISING; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S5P_IRQ_TYPE_EDGE_FALLING; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S5P_IRQ_TYPE_EDGE_BOTH; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S5P_IRQ_TYPE_LEVEL_LOW; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - shift = (offs & 0x7) * 4; - mask = 0x7 << shift; - - spin_lock(&eint_lock); - ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq)); - ctrl &= ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq)); - spin_unlock(&eint_lock); - - if (soc_is_exynos5250()) - s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf)); - else - s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf)); - - return 0; -} - -static struct irq_chip exynos_irq_eint = { - .name = "exynos-eint", - .irq_mask = exynos_irq_eint_mask, - .irq_unmask = exynos_irq_eint_unmask, - .irq_mask_ack = exynos_irq_eint_maskack, - .irq_ack = exynos_irq_eint_ack, - .irq_set_type = exynos_irq_eint_set_type, -#ifdef CONFIG_PM - .irq_set_wake = s3c_irqext_wake, -#endif -}; - -/* - * exynos4_irq_demux_eint - * - * This function demuxes the IRQ from from EINTs 16 to 31. - * It is designed to be inlined into the specific handler - * s5p_irq_demux_eintX_Y. - * - * Each EINT pend/mask registers handle eight of them. - */ -static inline void exynos_irq_demux_eint(unsigned int start) -{ - unsigned int irq; - - u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start)); - u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start)); - - status &= ~mask; - status &= 0xff; - - while (status) { - irq = fls(status) - 1; - generic_handle_irq(irq + start); - status &= ~(1 << irq); - } -} - -static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_get_chip(irq); - chained_irq_enter(chip, desc); - exynos_irq_demux_eint(IRQ_EINT(16)); - exynos_irq_demux_eint(IRQ_EINT(24)); - chained_irq_exit(chip, desc); -} - -static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) -{ - u32 *irq_data = irq_get_handler_data(irq); - struct irq_chip *chip = irq_get_chip(irq); - - chained_irq_enter(chip, desc); - generic_handle_irq(*irq_data); - chained_irq_exit(chip, desc); -} - -static int __init exynos_init_irq_eint(void) -{ - int irq; - -#ifdef CONFIG_PINCTRL_SAMSUNG - /* - * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf - * functionality along with support for external gpio and wakeup - * interrupts. If the samsung pinctrl driver is enabled and includes - * the wakeup interrupt support, then the setting up external wakeup - * interrupts here can be skipped. This check here is temporary to - * allow exynos4 platforms that do not use Samsung pinctrl driver to - * co-exist with platforms that do. When all of the Samsung Exynos4 - * platforms switch over to using the pinctrl driver, the wakeup - * interrupt support code here can be completely removed. - */ - static const struct of_device_id exynos_pinctrl_ids[] = { - { .compatible = "samsung,exynos4210-pinctrl", }, - { .compatible = "samsung,exynos4x12-pinctrl", }, - { .compatible = "samsung,exynos5250-pinctrl", }, - }; - struct device_node *pctrl_np, *wkup_np; - const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; - - for_each_matching_node(pctrl_np, exynos_pinctrl_ids) { - if (of_device_is_available(pctrl_np)) { - wkup_np = of_find_compatible_node(pctrl_np, NULL, - wkup_compat); - if (wkup_np) - return -ENODEV; - } - } -#endif - if (soc_is_exynos5440()) - return 0; - - if (soc_is_exynos5250()) - exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K); - else - exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K); - - if (exynos_eint_base == NULL) { - pr_err("unable to ioremap for EINT base address\n"); - return -ENOMEM; - } - - for (irq = 0 ; irq <= 31 ; irq++) { - irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint, - handle_level_irq); - set_irq_flags(IRQ_EINT(irq), IRQF_VALID); - } - - irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31); - - for (irq = 0 ; irq <= 15 ; irq++) { - eint0_15_data[irq] = IRQ_EINT(irq); - - if (soc_is_exynos5250()) { - irq_set_handler_data(exynos5_eint0_15_src_int[irq], - &eint0_15_data[irq]); - irq_set_chained_handler(exynos5_eint0_15_src_int[irq], - exynos_irq_eint0_15); - } else { - irq_set_handler_data(exynos4_eint0_15_src_int[irq], - &eint0_15_data[irq]); - irq_set_chained_handler(exynos4_eint0_15_src_int[irq], - exynos_irq_eint0_15); - } - } - - return 0; -} -arch_initcall(exynos_init_irq_eint); - -static struct resource exynos4_pmu_resource[] = { - DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU), - DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU1), -#if defined(CONFIG_SOC_EXYNOS4412) - DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU2), - DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU3), -#endif -}; - -static struct platform_device exynos4_device_pmu = { - .name = "arm-pmu", - .num_resources = ARRAY_SIZE(exynos4_pmu_resource), - .resource = exynos4_pmu_resource, -}; - -static int __init exynos_armpmu_init(void) -{ - if (!of_have_populated_dt()) { - if (soc_is_exynos4210() || soc_is_exynos4212()) - exynos4_device_pmu.num_resources = 2; - platform_device_register(&exynos4_device_pmu); - } - - return 0; -} -arch_initcall(exynos_armpmu_init); diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 11fc1e29819..38d45fd23be 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -19,9 +19,7 @@ void exynos_init_time(void); extern unsigned long xxti_f, xusbxti_f; struct map_desc; -void exynos_init_io(struct map_desc *mach_desc, int size); -void exynos4_init_irq(void); -void exynos5_init_irq(void); +void exynos_init_io(void); void exynos4_restart(char mode, const char *cmd); void exynos5_restart(char mode, const char *cmd); void exynos_init_late(void); diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c deleted file mode 100644 index ce1aad3eeeb..00000000000 --- a/arch/arm/mach-exynos/dev-ahci.c +++ /dev/null @@ -1,255 +0,0 @@ -/* linux/arch/arm/mach-exynos4/dev-ahci.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - AHCI support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/ahci_platform.h> - -#include <plat/cpu.h> - -#include <mach/irqs.h> -#include <mach/map.h> -#include <mach/regs-pmu.h> - -/* PHY Control Register */ -#define SATA_CTRL0 0x0 -/* PHY Link Control Register */ -#define SATA_CTRL1 0x4 -/* PHY Status Register */ -#define SATA_PHY_STATUS 0x8 - -#define SATA_CTRL0_RX_DATA_VALID(x) (x << 27) -#define SATA_CTRL0_SPEED_MODE (1 << 26) -#define SATA_CTRL0_M_PHY_CAL (1 << 19) -#define SATA_CTRL0_PHY_CMU_RST_N (1 << 10) -#define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9) -#define SATA_CTRL0_PHY_POR_N (1 << 8) - -#define SATA_CTRL1_RST_PMALIVE_N (1 << 8) -#define SATA_CTRL1_RST_RXOOB_N (1 << 7) -#define SATA_CTRL1_RST_RX_N (1 << 6) -#define SATA_CTRL1_RST_TX_N (1 << 5) - -#define SATA_PHY_STATUS_CMU_OK (1 << 18) -#define SATA_PHY_STATUS_LANE_OK (1 << 16) - -#define LANE0 0x200 -#define COM_LANE 0xA00 - -#define HOST_PORTS_IMPL 0xC -#define SCLK_SATA_FREQ (67 * MHZ) - -static void __iomem *phy_base, *phy_ctrl; - -struct phy_reg { - u8 reg; - u8 val; -}; - -/* SATA PHY setup */ -static const struct phy_reg exynos4_sataphy_cmu[] = { - { 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 }, - { 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 }, - { 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 }, - { 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 }, - { 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 }, - { 0x6b, 0xc8 }, { 0x6c, 0x06 }, -}; - -static const struct phy_reg exynos4_sataphy_lane[] = { - { 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 }, - { 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 }, - { 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e }, - { 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 }, - { 0x51, 0x0f }, -}; - -static const struct phy_reg exynos4_sataphy_comlane[] = { - { 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d }, - { 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 }, - { 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 }, - { 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 }, - { 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 }, - { 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 }, - { 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 }, - { 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d }, - { 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 }, - { 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 }, - { 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 }, - { 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff }, - { 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 }, - { 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 }, -}; - -static int wait_for_phy_ready(void __iomem *reg, unsigned long bit) -{ - unsigned long timeout; - - /* wait for maximum of 3 sec */ - timeout = jiffies + msecs_to_jiffies(3000); - while (!(__raw_readl(reg) & bit)) { - if (time_after(jiffies, timeout)) - return -1; - cpu_relax(); - } - return 0; -} - -static int ahci_phy_init(void __iomem *mmio) -{ - int i, ctrl0; - - for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++) - __raw_writeb(exynos4_sataphy_cmu[i].val, - phy_base + (exynos4_sataphy_cmu[i].reg * 4)); - - for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++) - __raw_writeb(exynos4_sataphy_lane[i].val, - phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4); - - for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++) - __raw_writeb(exynos4_sataphy_comlane[i].val, - phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4); - - __raw_writeb(0x07, phy_base); - - ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); - ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N; - __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); - - if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, - SATA_PHY_STATUS_CMU_OK) < 0) { - printk(KERN_ERR "PHY CMU not ready\n"); - return -EBUSY; - } - - __raw_writeb(0x03, phy_base + (COM_LANE * 4)); - - ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); - ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N; - __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); - - if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, - SATA_PHY_STATUS_LANE_OK) < 0) { - printk(KERN_ERR "PHY LANE not ready\n"); - return -EBUSY; - } - - ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); - ctrl0 |= SATA_CTRL0_M_PHY_CAL; - __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); - - return 0; -} - -static int exynos4_ahci_init(struct device *dev, void __iomem *mmio) -{ - struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata; - int val, ret; - - phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K); - if (!phy_base) { - dev_err(dev, "failed to allocate memory for SATA PHY\n"); - return -ENOMEM; - } - - phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16); - if (!phy_ctrl) { - dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n"); - ret = -ENOMEM; - goto err1; - } - - clk_sata = clk_get(dev, "sata"); - if (IS_ERR(clk_sata)) { - dev_err(dev, "failed to get sata clock\n"); - ret = PTR_ERR(clk_sata); - clk_sata = NULL; - goto err2; - - } - clk_enable(clk_sata); - - clk_sataphy = clk_get(dev, "sataphy"); - if (IS_ERR(clk_sataphy)) { - dev_err(dev, "failed to get sataphy clock\n"); - ret = PTR_ERR(clk_sataphy); - clk_sataphy = NULL; - goto err3; - } - clk_enable(clk_sataphy); - - clk_sclk_sata = clk_get(dev, "sclk_sata"); - if (IS_ERR(clk_sclk_sata)) { - dev_err(dev, "failed to get sclk_sata\n"); - ret = PTR_ERR(clk_sclk_sata); - clk_sclk_sata = NULL; - goto err4; - } - clk_enable(clk_sclk_sata); - clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ); - - __raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL); - - /* Enable PHY link control */ - val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N | - SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N; - __raw_writel(val, phy_ctrl + SATA_CTRL1); - - /* Set communication speed as 3Gbps and enable PHY power */ - val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE | - SATA_CTRL0_PHY_POR_N; - __raw_writel(val, phy_ctrl + SATA_CTRL0); - - /* Port0 is available */ - __raw_writel(0x1, mmio + HOST_PORTS_IMPL); - - return ahci_phy_init(mmio); - -err4: - clk_disable(clk_sataphy); - clk_put(clk_sataphy); -err3: - clk_disable(clk_sata); - clk_put(clk_sata); -err2: - iounmap(phy_ctrl); -err1: - iounmap(phy_base); - - return ret; -} - -static struct ahci_platform_data exynos4_ahci_pdata = { - .init = exynos4_ahci_init, -}; - -static struct resource exynos4_ahci_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_SATA, SZ_64K), - [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_SATA), -}; - -static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_ahci = { - .name = "ahci", - .id = -1, - .resource = exynos4_ahci_resource, - .num_resources = ARRAY_SIZE(exynos4_ahci_resource), - .dev = { - .platform_data = &exynos4_ahci_pdata, - .dma_mask = &exynos4_ahci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c deleted file mode 100644 index c662c89794b..00000000000 --- a/arch/arm/mach-exynos/dev-audio.c +++ /dev/null @@ -1,254 +0,0 @@ -/* linux/arch/arm/mach-exynos4/dev-audio.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_data/asoc-s3c.h> - -#include <plat/gpio-cfg.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -#define EXYNOS4_AUDSS_INT_MEM (0x03000000) - -static int exynos4_cfg_i2s(struct platform_device *pdev) -{ - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 7, S3C_GPIO_SFN(2)); - break; - case 1: - s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(2)); - break; - case 2: - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(4)); - break; - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata i2sv5_pdata = { - .cfg_gpio = exynos4_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI - | QUIRK_NEED_RSTCLR, - .idma_addr = EXYNOS4_AUDSS_INT_MEM, - }, - }, -}; - -static struct resource exynos4_i2s0_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), - [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX), -}; - -struct platform_device exynos4_device_i2s0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(exynos4_i2s0_resource), - .resource = exynos4_i2s0_resource, - .dev = { - .platform_data = &i2sv5_pdata, - }, -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = exynos4_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_NO_MUXPSR, - }, - }, -}; - -static struct resource exynos4_i2s1_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), -}; - -struct platform_device exynos4_device_i2s1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(exynos4_i2s1_resource), - .resource = exynos4_i2s1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -static struct resource exynos4_i2s2_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), -}; - -struct platform_device exynos4_device_i2s2 = { - .name = "samsung-i2s", - .id = 2, - .num_resources = ARRAY_SIZE(exynos4_i2s2_resource), - .resource = exynos4_i2s2_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int exynos4_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 5, S3C_GPIO_SFN(3)); - break; - case 1: - s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(3)); - break; - case 2: - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(3)); - break; - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = exynos4_pcm_cfg_gpio, -}; - -static struct resource exynos4_pcm0_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), -}; - -struct platform_device exynos4_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(exynos4_pcm0_resource), - .resource = exynos4_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource exynos4_pcm1_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), -}; - -struct platform_device exynos4_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(exynos4_pcm1_resource), - .resource = exynos4_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource exynos4_pcm2_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM2_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM2_RX), -}; - -struct platform_device exynos4_device_pcm2 = { - .name = "samsung-pcm", - .id = 2, - .num_resources = ARRAY_SIZE(exynos4_pcm2_resource), - .resource = exynos4_pcm2_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -/* AC97 Controller platform devices */ - -static int exynos4_ac97_cfg_gpio(struct platform_device *pdev) -{ - return s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(4)); -} - -static struct resource exynos4_ac97_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_AC97, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), - [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), - [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), - [4] = DEFINE_RES_IRQ(EXYNOS4_IRQ_AC97), -}; - -static struct s3c_audio_pdata s3c_ac97_pdata = { - .cfg_gpio = exynos4_ac97_cfg_gpio, -}; - -static u64 exynos4_ac97_dmamask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_ac97 = { - .name = "samsung-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(exynos4_ac97_resource), - .resource = exynos4_ac97_resource, - .dev = { - .platform_data = &s3c_ac97_pdata, - .dma_mask = &exynos4_ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* S/PDIF Controller platform_device */ - -static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) -{ - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4)); - - return 0; -} - -static struct resource exynos4_spdif_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_SPDIF, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPDIF), -}; - -static struct s3c_audio_pdata samsung_spdif_pdata = { - .cfg_gpio = exynos4_spdif_cfg_gpio, -}; - -static u64 exynos4_spdif_dmamask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_spdif = { - .name = "samsung-spdif", - .id = -1, - .num_resources = ARRAY_SIZE(exynos4_spdif_resource), - .resource = exynos4_spdif_resource, - .dev = { - .platform_data = &samsung_spdif_pdata, - .dma_mask = &exynos4_spdif_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c deleted file mode 100644 index d5bc129e6bb..00000000000 --- a/arch/arm/mach-exynos/dev-ohci.c +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/arch/arm/mach-exynos/dev-ohci.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - OHCI support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/platform_data/usb-ohci-exynos.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/devs.h> -#include <plat/usb-phy.h> - -static struct resource exynos4_ohci_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256), - [1] = DEFINE_RES_IRQ(IRQ_USB_HOST), -}; - -static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_ohci = { - .name = "exynos-ohci", - .id = -1, - .num_resources = ARRAY_SIZE(exynos4_ohci_resource), - .resource = exynos4_ohci_resource, - .dev = { - .dma_mask = &exynos4_ohci_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; - -void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd) -{ - struct exynos4_ohci_platdata *npd; - - npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata), - &exynos4_device_ohci); - - if (!npd->phy_init) - npd->phy_init = s5p_usb_phy_init; - if (!npd->phy_exit) - npd->phy_exit = s5p_usb_phy_exit; -} diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c deleted file mode 100644 index c48aff02c78..00000000000 --- a/arch/arm/mach-exynos/dev-uart.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Base EXYNOS UART resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/irqs.h> - -#include <plat/devs.h> - -#define EXYNOS_UART_RESOURCE(_series, _nr) \ -static struct resource exynos##_series##_uart##_nr##_resource[] = { \ - [0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART), \ - [1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr), \ -}; - -EXYNOS_UART_RESOURCE(4, 0) -EXYNOS_UART_RESOURCE(4, 1) -EXYNOS_UART_RESOURCE(4, 2) -EXYNOS_UART_RESOURCE(4, 3) - -struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = { - [0] = { - .resources = exynos4_uart0_resource, - .nr_resources = ARRAY_SIZE(exynos4_uart0_resource), - }, - [1] = { - .resources = exynos4_uart1_resource, - .nr_resources = ARRAY_SIZE(exynos4_uart1_resource), - }, - [2] = { - .resources = exynos4_uart2_resource, - .nr_resources = ARRAY_SIZE(exynos4_uart2_resource), - }, - [3] = { - .resources = exynos4_uart3_resource, - .nr_resources = ARRAY_SIZE(exynos4_uart3_resource), - }, -}; diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c deleted file mode 100644 index 87e07d6fc61..00000000000 --- a/arch/arm/mach-exynos/dma.c +++ /dev/null @@ -1,322 +0,0 @@ -/* linux/arch/arm/mach-exynos4/dma.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/dma-mapping.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl330.h> -#include <linux/of.h> - -#include <asm/irq.h> -#include <plat/devs.h> -#include <plat/irqs.h> -#include <plat/cpu.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/dma.h> - -static u8 exynos4210_pdma0_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM2_RX, - DMACH_PCM2_TX, - DMACH_MSM_REQ0, - DMACH_MSM_REQ2, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_SLIMBUS0_RX, - DMACH_SLIMBUS0_TX, - DMACH_SLIMBUS2_RX, - DMACH_SLIMBUS2_TX, - DMACH_SLIMBUS4_RX, - DMACH_SLIMBUS4_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, -}; - -static u8 exynos4212_pdma0_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM2_RX, - DMACH_PCM2_TX, - DMACH_MIPI_HSI0, - DMACH_MIPI_HSI1, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_SLIMBUS0_RX, - DMACH_SLIMBUS0_TX, - DMACH_SLIMBUS2_RX, - DMACH_SLIMBUS2_TX, - DMACH_SLIMBUS4_RX, - DMACH_SLIMBUS4_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, - DMACH_MIPI_HSI4, - DMACH_MIPI_HSI5, -}; - -static u8 exynos5250_pdma0_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM2_RX, - DMACH_PCM2_TX, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_SLIMBUS0_RX, - DMACH_SLIMBUS0_TX, - DMACH_SLIMBUS2_RX, - DMACH_SLIMBUS2_TX, - DMACH_SLIMBUS4_RX, - DMACH_SLIMBUS4_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, - DMACH_MIPI_HSI0, - DMACH_MIPI_HSI2, - DMACH_MIPI_HSI4, - DMACH_MIPI_HSI6, -}; - -static struct dma_pl330_platdata exynos_pdma0_pdata; - -static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330, - EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata); - -static u8 exynos4210_pdma1_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_MSM_REQ1, - DMACH_MSM_REQ3, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_SLIMBUS1_RX, - DMACH_SLIMBUS1_TX, - DMACH_SLIMBUS3_RX, - DMACH_SLIMBUS3_TX, - DMACH_SLIMBUS5_RX, - DMACH_SLIMBUS5_TX, -}; - -static u8 exynos4212_pdma1_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_MIPI_HSI2, - DMACH_MIPI_HSI3, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_SLIMBUS1_RX, - DMACH_SLIMBUS1_TX, - DMACH_SLIMBUS3_RX, - DMACH_SLIMBUS3_TX, - DMACH_SLIMBUS5_RX, - DMACH_SLIMBUS5_TX, - DMACH_SLIMBUS0AUX_RX, - DMACH_SLIMBUS0AUX_TX, - DMACH_SPDIF, - DMACH_MIPI_HSI6, - DMACH_MIPI_HSI7, -}; - -static u8 exynos5250_pdma1_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_PWM, - DMACH_SPDIF, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_SLIMBUS1_RX, - DMACH_SLIMBUS1_TX, - DMACH_SLIMBUS3_RX, - DMACH_SLIMBUS3_TX, - DMACH_SLIMBUS5_RX, - DMACH_SLIMBUS5_TX, - DMACH_SLIMBUS0AUX_RX, - DMACH_SLIMBUS0AUX_TX, - DMACH_DISP1, - DMACH_MIPI_HSI1, - DMACH_MIPI_HSI3, - DMACH_MIPI_HSI5, - DMACH_MIPI_HSI7, -}; - -static struct dma_pl330_platdata exynos_pdma1_pdata; - -static AMBA_AHB_DEVICE(exynos_pdma1, "dma-pl330.1", 0x00041330, - EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata); - -static u8 mdma_peri[] = { - DMACH_MTOM_0, - DMACH_MTOM_1, - DMACH_MTOM_2, - DMACH_MTOM_3, - DMACH_MTOM_4, - DMACH_MTOM_5, - DMACH_MTOM_6, - DMACH_MTOM_7, -}; - -static struct dma_pl330_platdata exynos_mdma1_pdata = { - .nr_valid_peri = ARRAY_SIZE(mdma_peri), - .peri_id = mdma_peri, -}; - -static AMBA_AHB_DEVICE(exynos_mdma1, "dma-pl330.2", 0x00041330, - EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata); - -static int __init exynos_dma_init(void) -{ - if (of_have_populated_dt()) - return 0; - - if (soc_is_exynos4210()) { - exynos_pdma0_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4210_pdma0_peri); - exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri; - exynos_pdma1_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4210_pdma1_peri); - exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri; - - if (samsung_rev() == EXYNOS4210_REV_0) - exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1; - } else if (soc_is_exynos4212() || soc_is_exynos4412()) { - exynos_pdma0_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4212_pdma0_peri); - exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri; - exynos_pdma1_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4212_pdma1_peri); - exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri; - } else if (soc_is_exynos5250()) { - exynos_pdma0_pdata.nr_valid_peri = - ARRAY_SIZE(exynos5250_pdma0_peri); - exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri; - exynos_pdma1_pdata.nr_valid_peri = - ARRAY_SIZE(exynos5250_pdma1_peri); - exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri; - - exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0; - exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K; - exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0; - exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1; - exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K; - exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1; - exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1; - exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K; - exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1; - } - - dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask); - dma_cap_set(DMA_PRIVATE, exynos_pdma0_pdata.cap_mask); - amba_device_register(&exynos_pdma0_device, &iomem_resource); - - dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask); - dma_cap_set(DMA_PRIVATE, exynos_pdma1_pdata.cap_mask); - amba_device_register(&exynos_pdma1_device, &iomem_resource); - - dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask); - amba_device_register(&exynos_mdma1_device, &iomem_resource); - - return 0; -} -arch_initcall(exynos_dma_init); diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index ed11f100d47..932129ef26c 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -48,20 +48,18 @@ static const struct firmware_ops exynos_firmware_ops = { void __init exynos_firmware_init(void) { - if (of_have_populated_dt()) { - struct device_node *nd; - const __be32 *addr; + struct device_node *nd; + const __be32 *addr; - nd = of_find_compatible_node(NULL, NULL, - "samsung,secure-firmware"); - if (!nd) - return; + nd = of_find_compatible_node(NULL, NULL, + "samsung,secure-firmware"); + if (!nd) + return; - addr = of_get_address(nd, 0, NULL, NULL); - if (!addr) { - pr_err("%s: No address specified.\n", __func__); - return; - } + addr = of_get_address(nd, 0, NULL, NULL); + if (!addr) { + pr_err("%s: No address specified.\n", __func__); + return; } pr_info("Running under secure firmware.\n"); diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h deleted file mode 100644 index eb24f1eb8e3..00000000000 --- a/arch/arm/mach-exynos/include/mach/gpio.h +++ /dev/null @@ -1,289 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -/* Macro for EXYNOS GPIO numbering */ - -#define EXYNOS_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -/* EXYNOS4 GPIO bank sizes */ - -#define EXYNOS4_GPIO_A0_NR (8) -#define EXYNOS4_GPIO_A1_NR (6) -#define EXYNOS4_GPIO_B_NR (8) -#define EXYNOS4_GPIO_C0_NR (5) -#define EXYNOS4_GPIO_C1_NR (5) -#define EXYNOS4_GPIO_D0_NR (4) -#define EXYNOS4_GPIO_D1_NR (4) -#define EXYNOS4_GPIO_E0_NR (5) -#define EXYNOS4_GPIO_E1_NR (8) -#define EXYNOS4_GPIO_E2_NR (6) -#define EXYNOS4_GPIO_E3_NR (8) -#define EXYNOS4_GPIO_E4_NR (8) -#define EXYNOS4_GPIO_F0_NR (8) -#define EXYNOS4_GPIO_F1_NR (8) -#define EXYNOS4_GPIO_F2_NR (8) -#define EXYNOS4_GPIO_F3_NR (6) -#define EXYNOS4_GPIO_J0_NR (8) -#define EXYNOS4_GPIO_J1_NR (5) -#define EXYNOS4_GPIO_K0_NR (7) -#define EXYNOS4_GPIO_K1_NR (7) -#define EXYNOS4_GPIO_K2_NR (7) -#define EXYNOS4_GPIO_K3_NR (7) -#define EXYNOS4_GPIO_L0_NR (8) -#define EXYNOS4_GPIO_L1_NR (3) -#define EXYNOS4_GPIO_L2_NR (8) -#define EXYNOS4_GPIO_X0_NR (8) -#define EXYNOS4_GPIO_X1_NR (8) -#define EXYNOS4_GPIO_X2_NR (8) -#define EXYNOS4_GPIO_X3_NR (8) -#define EXYNOS4_GPIO_Y0_NR (6) -#define EXYNOS4_GPIO_Y1_NR (4) -#define EXYNOS4_GPIO_Y2_NR (6) -#define EXYNOS4_GPIO_Y3_NR (8) -#define EXYNOS4_GPIO_Y4_NR (8) -#define EXYNOS4_GPIO_Y5_NR (8) -#define EXYNOS4_GPIO_Y6_NR (8) -#define EXYNOS4_GPIO_Z_NR (7) - -/* EXYNOS4 GPIO bank numbers */ - -enum exynos4_gpio_number { - EXYNOS4_GPIO_A0_START = 0, - EXYNOS4_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A0), - EXYNOS4_GPIO_B_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A1), - EXYNOS4_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_B), - EXYNOS4_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0), - EXYNOS4_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1), - EXYNOS4_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0), - EXYNOS4_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1), - EXYNOS4_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0), - EXYNOS4_GPIO_E2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1), - EXYNOS4_GPIO_E3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2), - EXYNOS4_GPIO_E4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3), - EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4), - EXYNOS4_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0), - EXYNOS4_GPIO_F2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1), - EXYNOS4_GPIO_F3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2), - EXYNOS4_GPIO_J0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F3), - EXYNOS4_GPIO_J1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J0), - EXYNOS4_GPIO_K0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J1), - EXYNOS4_GPIO_K1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K0), - EXYNOS4_GPIO_K2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K1), - EXYNOS4_GPIO_K3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K2), - EXYNOS4_GPIO_L0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K3), - EXYNOS4_GPIO_L1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L0), - EXYNOS4_GPIO_L2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L1), - EXYNOS4_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L2), - EXYNOS4_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X0), - EXYNOS4_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X1), - EXYNOS4_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X2), - EXYNOS4_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X3), - EXYNOS4_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y0), - EXYNOS4_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y1), - EXYNOS4_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y2), - EXYNOS4_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y3), - EXYNOS4_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y4), - EXYNOS4_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y5), - EXYNOS4_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y6), -}; - -/* EXYNOS4 GPIO number definitions */ - -#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr)) -#define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr)) -#define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr)) -#define EXYNOS4_GPC0(_nr) (EXYNOS4_GPIO_C0_START + (_nr)) -#define EXYNOS4_GPC1(_nr) (EXYNOS4_GPIO_C1_START + (_nr)) -#define EXYNOS4_GPD0(_nr) (EXYNOS4_GPIO_D0_START + (_nr)) -#define EXYNOS4_GPD1(_nr) (EXYNOS4_GPIO_D1_START + (_nr)) -#define EXYNOS4_GPE0(_nr) (EXYNOS4_GPIO_E0_START + (_nr)) -#define EXYNOS4_GPE1(_nr) (EXYNOS4_GPIO_E1_START + (_nr)) -#define EXYNOS4_GPE2(_nr) (EXYNOS4_GPIO_E2_START + (_nr)) -#define EXYNOS4_GPE3(_nr) (EXYNOS4_GPIO_E3_START + (_nr)) -#define EXYNOS4_GPE4(_nr) (EXYNOS4_GPIO_E4_START + (_nr)) -#define EXYNOS4_GPF0(_nr) (EXYNOS4_GPIO_F0_START + (_nr)) -#define EXYNOS4_GPF1(_nr) (EXYNOS4_GPIO_F1_START + (_nr)) -#define EXYNOS4_GPF2(_nr) (EXYNOS4_GPIO_F2_START + (_nr)) -#define EXYNOS4_GPF3(_nr) (EXYNOS4_GPIO_F3_START + (_nr)) -#define EXYNOS4_GPJ0(_nr) (EXYNOS4_GPIO_J0_START + (_nr)) -#define EXYNOS4_GPJ1(_nr) (EXYNOS4_GPIO_J1_START + (_nr)) -#define EXYNOS4_GPK0(_nr) (EXYNOS4_GPIO_K0_START + (_nr)) -#define EXYNOS4_GPK1(_nr) (EXYNOS4_GPIO_K1_START + (_nr)) -#define EXYNOS4_GPK2(_nr) (EXYNOS4_GPIO_K2_START + (_nr)) -#define EXYNOS4_GPK3(_nr) (EXYNOS4_GPIO_K3_START + (_nr)) -#define EXYNOS4_GPL0(_nr) (EXYNOS4_GPIO_L0_START + (_nr)) -#define EXYNOS4_GPL1(_nr) (EXYNOS4_GPIO_L1_START + (_nr)) -#define EXYNOS4_GPL2(_nr) (EXYNOS4_GPIO_L2_START + (_nr)) -#define EXYNOS4_GPX0(_nr) (EXYNOS4_GPIO_X0_START + (_nr)) -#define EXYNOS4_GPX1(_nr) (EXYNOS4_GPIO_X1_START + (_nr)) -#define EXYNOS4_GPX2(_nr) (EXYNOS4_GPIO_X2_START + (_nr)) -#define EXYNOS4_GPX3(_nr) (EXYNOS4_GPIO_X3_START + (_nr)) -#define EXYNOS4_GPY0(_nr) (EXYNOS4_GPIO_Y0_START + (_nr)) -#define EXYNOS4_GPY1(_nr) (EXYNOS4_GPIO_Y1_START + (_nr)) -#define EXYNOS4_GPY2(_nr) (EXYNOS4_GPIO_Y2_START + (_nr)) -#define EXYNOS4_GPY3(_nr) (EXYNOS4_GPIO_Y3_START + (_nr)) -#define EXYNOS4_GPY4(_nr) (EXYNOS4_GPIO_Y4_START + (_nr)) -#define EXYNOS4_GPY5(_nr) (EXYNOS4_GPIO_Y5_START + (_nr)) -#define EXYNOS4_GPY6(_nr) (EXYNOS4_GPIO_Y6_START + (_nr)) -#define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr)) - -/* the end of the EXYNOS4 specific gpios */ - -#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1) - -/* EXYNOS5 GPIO bank sizes */ - -#define EXYNOS5_GPIO_A0_NR (8) -#define EXYNOS5_GPIO_A1_NR (6) -#define EXYNOS5_GPIO_A2_NR (8) -#define EXYNOS5_GPIO_B0_NR (5) -#define EXYNOS5_GPIO_B1_NR (5) -#define EXYNOS5_GPIO_B2_NR (4) -#define EXYNOS5_GPIO_B3_NR (4) -#define EXYNOS5_GPIO_C0_NR (7) -#define EXYNOS5_GPIO_C1_NR (4) -#define EXYNOS5_GPIO_C2_NR (7) -#define EXYNOS5_GPIO_C3_NR (7) -#define EXYNOS5_GPIO_C4_NR (7) -#define EXYNOS5_GPIO_D0_NR (4) -#define EXYNOS5_GPIO_D1_NR (8) -#define EXYNOS5_GPIO_Y0_NR (6) -#define EXYNOS5_GPIO_Y1_NR (4) -#define EXYNOS5_GPIO_Y2_NR (6) -#define EXYNOS5_GPIO_Y3_NR (8) -#define EXYNOS5_GPIO_Y4_NR (8) -#define EXYNOS5_GPIO_Y5_NR (8) -#define EXYNOS5_GPIO_Y6_NR (8) -#define EXYNOS5_GPIO_X0_NR (8) -#define EXYNOS5_GPIO_X1_NR (8) -#define EXYNOS5_GPIO_X2_NR (8) -#define EXYNOS5_GPIO_X3_NR (8) -#define EXYNOS5_GPIO_E0_NR (8) -#define EXYNOS5_GPIO_E1_NR (2) -#define EXYNOS5_GPIO_F0_NR (4) -#define EXYNOS5_GPIO_F1_NR (4) -#define EXYNOS5_GPIO_G0_NR (8) -#define EXYNOS5_GPIO_G1_NR (8) -#define EXYNOS5_GPIO_G2_NR (2) -#define EXYNOS5_GPIO_H0_NR (4) -#define EXYNOS5_GPIO_H1_NR (8) -#define EXYNOS5_GPIO_V0_NR (8) -#define EXYNOS5_GPIO_V1_NR (8) -#define EXYNOS5_GPIO_V2_NR (8) -#define EXYNOS5_GPIO_V3_NR (8) -#define EXYNOS5_GPIO_V4_NR (2) -#define EXYNOS5_GPIO_Z_NR (7) - -/* EXYNOS5 GPIO bank numbers */ - -enum exynos5_gpio_number { - EXYNOS5_GPIO_A0_START = 0, - EXYNOS5_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A0), - EXYNOS5_GPIO_A2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A1), - EXYNOS5_GPIO_B0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A2), - EXYNOS5_GPIO_B1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B0), - EXYNOS5_GPIO_B2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B1), - EXYNOS5_GPIO_B3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B2), - EXYNOS5_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B3), - EXYNOS5_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0), - EXYNOS5_GPIO_C2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1), - EXYNOS5_GPIO_C3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2), - EXYNOS5_GPIO_C4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3), - EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C4), - EXYNOS5_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0), - EXYNOS5_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1), - EXYNOS5_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0), - EXYNOS5_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y1), - EXYNOS5_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y2), - EXYNOS5_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y3), - EXYNOS5_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y4), - EXYNOS5_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y5), - EXYNOS5_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y6), - EXYNOS5_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X0), - EXYNOS5_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X1), - EXYNOS5_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X2), - EXYNOS5_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X3), - EXYNOS5_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E0), - EXYNOS5_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E1), - EXYNOS5_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F0), - EXYNOS5_GPIO_G0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F1), - EXYNOS5_GPIO_G1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G0), - EXYNOS5_GPIO_G2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G1), - EXYNOS5_GPIO_H0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G2), - EXYNOS5_GPIO_H1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H0), - EXYNOS5_GPIO_V0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H1), - EXYNOS5_GPIO_V1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V0), - EXYNOS5_GPIO_V2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V1), - EXYNOS5_GPIO_V3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V2), - EXYNOS5_GPIO_V4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V3), - EXYNOS5_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V4), -}; - -/* EXYNOS5 GPIO number definitions */ - -#define EXYNOS5_GPA0(_nr) (EXYNOS5_GPIO_A0_START + (_nr)) -#define EXYNOS5_GPA1(_nr) (EXYNOS5_GPIO_A1_START + (_nr)) -#define EXYNOS5_GPA2(_nr) (EXYNOS5_GPIO_A2_START + (_nr)) -#define EXYNOS5_GPB0(_nr) (EXYNOS5_GPIO_B0_START + (_nr)) -#define EXYNOS5_GPB1(_nr) (EXYNOS5_GPIO_B1_START + (_nr)) -#define EXYNOS5_GPB2(_nr) (EXYNOS5_GPIO_B2_START + (_nr)) -#define EXYNOS5_GPB3(_nr) (EXYNOS5_GPIO_B3_START + (_nr)) -#define EXYNOS5_GPC0(_nr) (EXYNOS5_GPIO_C0_START + (_nr)) -#define EXYNOS5_GPC1(_nr) (EXYNOS5_GPIO_C1_START + (_nr)) -#define EXYNOS5_GPC2(_nr) (EXYNOS5_GPIO_C2_START + (_nr)) -#define EXYNOS5_GPC3(_nr) (EXYNOS5_GPIO_C3_START + (_nr)) -#define EXYNOS5_GPC4(_nr) (EXYNOS5_GPIO_C4_START + (_nr)) -#define EXYNOS5_GPD0(_nr) (EXYNOS5_GPIO_D0_START + (_nr)) -#define EXYNOS5_GPD1(_nr) (EXYNOS5_GPIO_D1_START + (_nr)) -#define EXYNOS5_GPY0(_nr) (EXYNOS5_GPIO_Y0_START + (_nr)) -#define EXYNOS5_GPY1(_nr) (EXYNOS5_GPIO_Y1_START + (_nr)) -#define EXYNOS5_GPY2(_nr) (EXYNOS5_GPIO_Y2_START + (_nr)) -#define EXYNOS5_GPY3(_nr) (EXYNOS5_GPIO_Y3_START + (_nr)) -#define EXYNOS5_GPY4(_nr) (EXYNOS5_GPIO_Y4_START + (_nr)) -#define EXYNOS5_GPY5(_nr) (EXYNOS5_GPIO_Y5_START + (_nr)) -#define EXYNOS5_GPY6(_nr) (EXYNOS5_GPIO_Y6_START + (_nr)) -#define EXYNOS5_GPX0(_nr) (EXYNOS5_GPIO_X0_START + (_nr)) -#define EXYNOS5_GPX1(_nr) (EXYNOS5_GPIO_X1_START + (_nr)) -#define EXYNOS5_GPX2(_nr) (EXYNOS5_GPIO_X2_START + (_nr)) -#define EXYNOS5_GPX3(_nr) (EXYNOS5_GPIO_X3_START + (_nr)) -#define EXYNOS5_GPE0(_nr) (EXYNOS5_GPIO_E0_START + (_nr)) -#define EXYNOS5_GPE1(_nr) (EXYNOS5_GPIO_E1_START + (_nr)) -#define EXYNOS5_GPF0(_nr) (EXYNOS5_GPIO_F0_START + (_nr)) -#define EXYNOS5_GPF1(_nr) (EXYNOS5_GPIO_F1_START + (_nr)) -#define EXYNOS5_GPG0(_nr) (EXYNOS5_GPIO_G0_START + (_nr)) -#define EXYNOS5_GPG1(_nr) (EXYNOS5_GPIO_G1_START + (_nr)) -#define EXYNOS5_GPG2(_nr) (EXYNOS5_GPIO_G2_START + (_nr)) -#define EXYNOS5_GPH0(_nr) (EXYNOS5_GPIO_H0_START + (_nr)) -#define EXYNOS5_GPH1(_nr) (EXYNOS5_GPIO_H1_START + (_nr)) -#define EXYNOS5_GPV0(_nr) (EXYNOS5_GPIO_V0_START + (_nr)) -#define EXYNOS5_GPV1(_nr) (EXYNOS5_GPIO_V1_START + (_nr)) -#define EXYNOS5_GPV2(_nr) (EXYNOS5_GPIO_V2_START + (_nr)) -#define EXYNOS5_GPV3(_nr) (EXYNOS5_GPIO_V3_START + (_nr)) -#define EXYNOS5_GPV4(_nr) (EXYNOS5_GPIO_V4_START + (_nr)) -#define EXYNOS5_GPZ(_nr) (EXYNOS5_GPIO_Z_START + (_nr)) - -/* the end of the EXYNOS5 specific gpios */ - -#define EXYNOS5_GPIO_END (EXYNOS5_GPZ(EXYNOS5_GPIO_Z_NR) + 1) - -/* actually, EXYNOS5_GPIO_END is bigger than EXYNOS4 */ - -#define S3C_GPIO_END (EXYNOS5_GPIO_END) - -/* define the number of gpios */ - -#define ARCH_NR_GPIOS (CONFIG_SAMSUNG_GPIO_EXTRA + S3C_GPIO_END) - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h deleted file mode 100644 index c72f59d91fc..00000000000 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ /dev/null @@ -1,476 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -/* PPI: Private Peripheral Interrupt */ - -#define IRQ_PPI(x) (x + 16) - -/* SPI: Shared Peripheral Interrupt */ - -#define IRQ_SPI(x) (x + 32) - -/* COMBINER */ - -#define MAX_IRQ_IN_COMBINER 8 -#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128)) -#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) - -/* For EXYNOS4 and EXYNOS5 */ - -#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32) - -/* For EXYNOS4 SoCs */ - -#define EXYNOS4_IRQ_EINT0 IRQ_SPI(16) -#define EXYNOS4_IRQ_EINT1 IRQ_SPI(17) -#define EXYNOS4_IRQ_EINT2 IRQ_SPI(18) -#define EXYNOS4_IRQ_EINT3 IRQ_SPI(19) -#define EXYNOS4_IRQ_EINT4 IRQ_SPI(20) -#define EXYNOS4_IRQ_EINT5 IRQ_SPI(21) -#define EXYNOS4_IRQ_EINT6 IRQ_SPI(22) -#define EXYNOS4_IRQ_EINT7 IRQ_SPI(23) -#define EXYNOS4_IRQ_EINT8 IRQ_SPI(24) -#define EXYNOS4_IRQ_EINT9 IRQ_SPI(25) -#define EXYNOS4_IRQ_EINT10 IRQ_SPI(26) -#define EXYNOS4_IRQ_EINT11 IRQ_SPI(27) -#define EXYNOS4_IRQ_EINT12 IRQ_SPI(28) -#define EXYNOS4_IRQ_EINT13 IRQ_SPI(29) -#define EXYNOS4_IRQ_EINT14 IRQ_SPI(30) -#define EXYNOS4_IRQ_EINT15 IRQ_SPI(31) - -#define EXYNOS4_IRQ_MDMA0 IRQ_SPI(33) -#define EXYNOS4_IRQ_MDMA1 IRQ_SPI(34) -#define EXYNOS4_IRQ_PDMA0 IRQ_SPI(35) -#define EXYNOS4_IRQ_PDMA1 IRQ_SPI(36) -#define EXYNOS4_IRQ_TIMER0_VIC IRQ_SPI(37) -#define EXYNOS4_IRQ_TIMER1_VIC IRQ_SPI(38) -#define EXYNOS4_IRQ_TIMER2_VIC IRQ_SPI(39) -#define EXYNOS4_IRQ_TIMER3_VIC IRQ_SPI(40) -#define EXYNOS4_IRQ_TIMER4_VIC IRQ_SPI(41) -#define EXYNOS4_IRQ_MCT_L0 IRQ_SPI(42) -#define EXYNOS4_IRQ_WDT IRQ_SPI(43) -#define EXYNOS4_IRQ_RTC_ALARM IRQ_SPI(44) -#define EXYNOS4_IRQ_RTC_TIC IRQ_SPI(45) -#define EXYNOS4_IRQ_GPIO_XB IRQ_SPI(46) -#define EXYNOS4_IRQ_GPIO_XA IRQ_SPI(47) -#define EXYNOS4_IRQ_MCT_L1 IRQ_SPI(48) - -#define EXYNOS4_IRQ_UART0 IRQ_SPI(52) -#define EXYNOS4_IRQ_UART1 IRQ_SPI(53) -#define EXYNOS4_IRQ_UART2 IRQ_SPI(54) -#define EXYNOS4_IRQ_UART3 IRQ_SPI(55) -#define EXYNOS4_IRQ_UART4 IRQ_SPI(56) -#define EXYNOS4_IRQ_MCT_G0 IRQ_SPI(57) -#define EXYNOS4_IRQ_IIC IRQ_SPI(58) -#define EXYNOS4_IRQ_IIC1 IRQ_SPI(59) -#define EXYNOS4_IRQ_IIC2 IRQ_SPI(60) -#define EXYNOS4_IRQ_IIC3 IRQ_SPI(61) -#define EXYNOS4_IRQ_IIC4 IRQ_SPI(62) -#define EXYNOS4_IRQ_IIC5 IRQ_SPI(63) -#define EXYNOS4_IRQ_IIC6 IRQ_SPI(64) -#define EXYNOS4_IRQ_IIC7 IRQ_SPI(65) -#define EXYNOS4_IRQ_SPI0 IRQ_SPI(66) -#define EXYNOS4_IRQ_SPI1 IRQ_SPI(67) -#define EXYNOS4_IRQ_SPI2 IRQ_SPI(68) - -#define EXYNOS4_IRQ_USB_HOST IRQ_SPI(70) -#define EXYNOS4_IRQ_USB_HSOTG IRQ_SPI(71) -#define EXYNOS4_IRQ_MODEM_IF IRQ_SPI(72) -#define EXYNOS4_IRQ_HSMMC0 IRQ_SPI(73) -#define EXYNOS4_IRQ_HSMMC1 IRQ_SPI(74) -#define EXYNOS4_IRQ_HSMMC2 IRQ_SPI(75) -#define EXYNOS4_IRQ_HSMMC3 IRQ_SPI(76) -#define EXYNOS4_IRQ_DWMCI IRQ_SPI(77) - -#define EXYNOS4_IRQ_MIPI_CSIS0 IRQ_SPI(78) -#define EXYNOS4_IRQ_MIPI_CSIS1 IRQ_SPI(80) - -#define EXYNOS4_IRQ_ONENAND_AUDI IRQ_SPI(82) -#define EXYNOS4_IRQ_ROTATOR IRQ_SPI(83) -#define EXYNOS4_IRQ_FIMC0 IRQ_SPI(84) -#define EXYNOS4_IRQ_FIMC1 IRQ_SPI(85) -#define EXYNOS4_IRQ_FIMC2 IRQ_SPI(86) -#define EXYNOS4_IRQ_FIMC3 IRQ_SPI(87) -#define EXYNOS4_IRQ_JPEG IRQ_SPI(88) -#define EXYNOS4_IRQ_2D IRQ_SPI(89) -#define EXYNOS4_IRQ_PCIE IRQ_SPI(90) - -#define EXYNOS4_IRQ_MIXER IRQ_SPI(91) -#define EXYNOS4_IRQ_HDMI IRQ_SPI(92) -#define EXYNOS4_IRQ_IIC_HDMIPHY IRQ_SPI(93) -#define EXYNOS4_IRQ_MFC IRQ_SPI(94) -#define EXYNOS4_IRQ_SDO IRQ_SPI(95) - -#define EXYNOS4_IRQ_AUDIO_SS IRQ_SPI(96) -#define EXYNOS4_IRQ_I2S0 IRQ_SPI(97) -#define EXYNOS4_IRQ_I2S1 IRQ_SPI(98) -#define EXYNOS4_IRQ_I2S2 IRQ_SPI(99) -#define EXYNOS4_IRQ_AC97 IRQ_SPI(100) - -#define EXYNOS4_IRQ_SPDIF IRQ_SPI(104) -#define EXYNOS4_IRQ_ADC0 IRQ_SPI(105) -#define EXYNOS4_IRQ_PEN0 IRQ_SPI(106) -#define EXYNOS4_IRQ_ADC1 IRQ_SPI(107) -#define EXYNOS4_IRQ_PEN1 IRQ_SPI(108) -#define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109) -#define EXYNOS4_IRQ_POWER_PMU IRQ_SPI(110) -#define EXYNOS4_IRQ_GPS IRQ_SPI(111) -#define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) -#define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113) - -#define EXYNOS4_IRQ_TSI IRQ_SPI(115) -#define EXYNOS4_IRQ_SATA IRQ_SPI(116) - -#define EXYNOS4_IRQ_PMU COMBINER_IRQ(2, 2) -#define EXYNOS4_IRQ_PMU_CPU1 COMBINER_IRQ(3, 2) -#define EXYNOS4_IRQ_PMU_CPU2 COMBINER_IRQ(18, 2) -#define EXYNOS4_IRQ_PMU_CPU3 COMBINER_IRQ(19, 2) - -#define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4) -#define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4) - -#define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) -#define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1) -#define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2) -#define EXYNOS4_IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3) -#define EXYNOS4_IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4) -#define EXYNOS4_IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5) -#define EXYNOS4_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6) -#define EXYNOS4_IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7) - -#define EXYNOS4_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0) -#define EXYNOS4_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1) -#define EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2) -#define EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3) -#define EXYNOS4_IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4) -#define EXYNOS4_IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5) -#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) -#define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) - -#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE0_0 COMBINER_IRQ(16, 0) -#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE1_0 COMBINER_IRQ(16, 1) -#define EXYNOS4_IRQ_SYSMMU_FIMC_ISP_0 COMBINER_IRQ(16, 2) -#define EXYNOS4_IRQ_SYSMMU_FIMC_DRC_0 COMBINER_IRQ(16, 3) -#define EXYNOS4_IRQ_SYSMMU_FIMC_FD_0 COMBINER_IRQ(16, 4) -#define EXYNOS4_IRQ_SYSMMU_FIMC_CX_0 COMBINER_IRQ(16, 5) - -#define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0) -#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) -#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) - -#define EXYNOS4210_MAX_COMBINER_NR 16 -#define EXYNOS4212_MAX_COMBINER_NR 18 -#define EXYNOS4412_MAX_COMBINER_NR 20 -#define EXYNOS4_MAX_COMBINER_NR EXYNOS4412_MAX_COMBINER_NR - -#define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16 -#define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9 - -/* - * For Compatibility: - * the default is for EXYNOS4, and - * for exynos5, should be re-mapped at function - */ - -#define IRQ_TIMER0_VIC EXYNOS4_IRQ_TIMER0_VIC -#define IRQ_TIMER1_VIC EXYNOS4_IRQ_TIMER1_VIC -#define IRQ_TIMER2_VIC EXYNOS4_IRQ_TIMER2_VIC -#define IRQ_TIMER3_VIC EXYNOS4_IRQ_TIMER3_VIC -#define IRQ_TIMER4_VIC EXYNOS4_IRQ_TIMER4_VIC - -#define IRQ_WDT EXYNOS4_IRQ_WDT -#define IRQ_RTC_ALARM EXYNOS4_IRQ_RTC_ALARM -#define IRQ_RTC_TIC EXYNOS4_IRQ_RTC_TIC -#define IRQ_GPIO_XB EXYNOS4_IRQ_GPIO_XB -#define IRQ_GPIO_XA EXYNOS4_IRQ_GPIO_XA - -#define IRQ_IIC EXYNOS4_IRQ_IIC -#define IRQ_IIC1 EXYNOS4_IRQ_IIC1 -#define IRQ_IIC3 EXYNOS4_IRQ_IIC3 -#define IRQ_IIC5 EXYNOS4_IRQ_IIC5 -#define IRQ_IIC6 EXYNOS4_IRQ_IIC6 -#define IRQ_IIC7 EXYNOS4_IRQ_IIC7 - -#define IRQ_SPI0 EXYNOS4_IRQ_SPI0 -#define IRQ_SPI1 EXYNOS4_IRQ_SPI1 -#define IRQ_SPI2 EXYNOS4_IRQ_SPI2 - -#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST -#define IRQ_OTG EXYNOS4_IRQ_USB_HSOTG - -#define IRQ_HSMMC0 EXYNOS4_IRQ_HSMMC0 -#define IRQ_HSMMC1 EXYNOS4_IRQ_HSMMC1 -#define IRQ_HSMMC2 EXYNOS4_IRQ_HSMMC2 -#define IRQ_HSMMC3 EXYNOS4_IRQ_HSMMC3 - -#define IRQ_MIPI_CSIS0 EXYNOS4_IRQ_MIPI_CSIS0 - -#define IRQ_ONENAND_AUDI EXYNOS4_IRQ_ONENAND_AUDI - -#define IRQ_FIMC0 EXYNOS4_IRQ_FIMC0 -#define IRQ_FIMC1 EXYNOS4_IRQ_FIMC1 -#define IRQ_FIMC2 EXYNOS4_IRQ_FIMC2 -#define IRQ_FIMC3 EXYNOS4_IRQ_FIMC3 -#define IRQ_JPEG EXYNOS4_IRQ_JPEG -#define IRQ_2D EXYNOS4_IRQ_2D - -#define IRQ_MIXER EXYNOS4_IRQ_MIXER -#define IRQ_HDMI EXYNOS4_IRQ_HDMI -#define IRQ_IIC_HDMIPHY EXYNOS4_IRQ_IIC_HDMIPHY -#define IRQ_MFC EXYNOS4_IRQ_MFC -#define IRQ_SDO EXYNOS4_IRQ_SDO - -#define IRQ_I2S0 EXYNOS4_IRQ_I2S0 - -#define IRQ_ADC EXYNOS4_IRQ_ADC0 -#define IRQ_TC EXYNOS4_IRQ_PEN0 - -#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD - -#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO -#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC -#define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM - -#define IRQ_GPIO1_NR_GROUPS EXYNOS4_IRQ_GPIO1_NR_GROUPS -#define IRQ_GPIO2_NR_GROUPS EXYNOS4_IRQ_GPIO2_NR_GROUPS - -/* For EXYNOS5 SoCs */ - -#define EXYNOS5_IRQ_MDMA0 IRQ_SPI(33) -#define EXYNOS5_IRQ_PDMA0 IRQ_SPI(34) -#define EXYNOS5_IRQ_PDMA1 IRQ_SPI(35) -#define EXYNOS5_IRQ_TIMER0_VIC IRQ_SPI(36) -#define EXYNOS5_IRQ_TIMER1_VIC IRQ_SPI(37) -#define EXYNOS5_IRQ_TIMER2_VIC IRQ_SPI(38) -#define EXYNOS5_IRQ_TIMER3_VIC IRQ_SPI(39) -#define EXYNOS5_IRQ_TIMER4_VIC IRQ_SPI(40) -#define EXYNOS5_IRQ_RTIC IRQ_SPI(41) -#define EXYNOS5_IRQ_WDT IRQ_SPI(42) -#define EXYNOS5_IRQ_RTC_ALARM IRQ_SPI(43) -#define EXYNOS5_IRQ_RTC_TIC IRQ_SPI(44) -#define EXYNOS5_IRQ_GPIO_XB IRQ_SPI(45) -#define EXYNOS5_IRQ_GPIO_XA IRQ_SPI(46) -#define EXYNOS5_IRQ_GPIO IRQ_SPI(47) -#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48) -#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49) -#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50) -#define EXYNOS5_IRQ_IIC IRQ_SPI(56) -#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57) -#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58) -#define EXYNOS5_IRQ_IIC3 IRQ_SPI(59) -#define EXYNOS5_IRQ_IIC4 IRQ_SPI(60) -#define EXYNOS5_IRQ_IIC5 IRQ_SPI(61) -#define EXYNOS5_IRQ_IIC6 IRQ_SPI(62) -#define EXYNOS5_IRQ_IIC7 IRQ_SPI(63) -#define EXYNOS5_IRQ_IIC_HDMIPHY IRQ_SPI(64) -#define EXYNOS5_IRQ_TMU IRQ_SPI(65) -#define EXYNOS5_IRQ_FIQ_0 IRQ_SPI(66) -#define EXYNOS5_IRQ_FIQ_1 IRQ_SPI(67) -#define EXYNOS5_IRQ_SPI0 IRQ_SPI(68) -#define EXYNOS5_IRQ_SPI1 IRQ_SPI(69) -#define EXYNOS5_IRQ_SPI2 IRQ_SPI(70) -#define EXYNOS5_IRQ_USB_HOST IRQ_SPI(71) -#define EXYNOS5_IRQ_USB3_DRD IRQ_SPI(72) -#define EXYNOS5_IRQ_MIPI_HSI IRQ_SPI(73) -#define EXYNOS5_IRQ_USB_HSOTG IRQ_SPI(74) -#define EXYNOS5_IRQ_HSMMC0 IRQ_SPI(75) -#define EXYNOS5_IRQ_HSMMC1 IRQ_SPI(76) -#define EXYNOS5_IRQ_HSMMC2 IRQ_SPI(77) -#define EXYNOS5_IRQ_HSMMC3 IRQ_SPI(78) -#define EXYNOS5_IRQ_MIPICSI0 IRQ_SPI(79) -#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80) -#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81) -#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82) -#define EXYNOS5_IRQ_WDT_IOP IRQ_SPI(83) -#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84) -#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85) -#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86) -#define EXYNOS5_IRQ_GSC2 IRQ_SPI(87) -#define EXYNOS5_IRQ_GSC3 IRQ_SPI(88) -#define EXYNOS5_IRQ_JPEG IRQ_SPI(89) -#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90) -#define EXYNOS5_IRQ_2D IRQ_SPI(91) -#define EXYNOS5_IRQ_EFNFCON_0 IRQ_SPI(92) -#define EXYNOS5_IRQ_EFNFCON_1 IRQ_SPI(93) -#define EXYNOS5_IRQ_MIXER IRQ_SPI(94) -#define EXYNOS5_IRQ_HDMI IRQ_SPI(95) -#define EXYNOS5_IRQ_MFC IRQ_SPI(96) -#define EXYNOS5_IRQ_AUDIO_SS IRQ_SPI(97) -#define EXYNOS5_IRQ_I2S0 IRQ_SPI(98) -#define EXYNOS5_IRQ_I2S1 IRQ_SPI(99) -#define EXYNOS5_IRQ_I2S2 IRQ_SPI(100) -#define EXYNOS5_IRQ_AC97 IRQ_SPI(101) -#define EXYNOS5_IRQ_PCM0 IRQ_SPI(102) -#define EXYNOS5_IRQ_PCM1 IRQ_SPI(103) -#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104) -#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105) -#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106) -#define EXYNOS5_IRQ_ADC1 IRQ_SPI(107) -#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108) -#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109) -#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110) -#define EXYNOS5_IRQ_EAGLE_PMU IRQ_SPI(111) -#define EXYNOS5_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) -#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113) -#define EXYNOS5_IRQ_CEC IRQ_SPI(114) -#define EXYNOS5_IRQ_SATA IRQ_SPI(115) - -#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123) -#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124) -#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125) -#define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126) -#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127) - -/* EXYNOS5440 */ - -#define EXYNOS5440_IRQ_UART0 IRQ_SPI(2) -#define EXYNOS5440_IRQ_UART1 IRQ_SPI(3) - -#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2) - -#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0) -#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1) -#define EXYNOS5_IRQ_SYSMMU_GSC1_0 COMBINER_IRQ(2, 2) -#define EXYNOS5_IRQ_SYSMMU_GSC1_1 COMBINER_IRQ(2, 3) -#define EXYNOS5_IRQ_SYSMMU_GSC2_0 COMBINER_IRQ(2, 4) -#define EXYNOS5_IRQ_SYSMMU_GSC2_1 COMBINER_IRQ(2, 5) -#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6) -#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7) - -#define EXYNOS5_IRQ_SYSMMU_LITE2_0 COMBINER_IRQ(3, 0) -#define EXYNOS5_IRQ_SYSMMU_LITE2_1 COMBINER_IRQ(3, 1) -#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2) -#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3) -#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4) -#define EXYNOS5_IRQ_SYSMMU_LITE0_1 COMBINER_IRQ(3, 5) -#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_0 COMBINER_IRQ(3, 6) -#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_1 COMBINER_IRQ(3, 7) - -#define EXYNOS5_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(4, 0) -#define EXYNOS5_IRQ_SYSMMU_ROTATOR_1 COMBINER_IRQ(4, 1) -#define EXYNOS5_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 2) -#define EXYNOS5_IRQ_SYSMMU_JPEG_1 COMBINER_IRQ(4, 3) - -#define EXYNOS5_IRQ_SYSMMU_FD_0 COMBINER_IRQ(5, 0) -#define EXYNOS5_IRQ_SYSMMU_FD_1 COMBINER_IRQ(5, 1) -#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_0 COMBINER_IRQ(5, 2) -#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_1 COMBINER_IRQ(5, 3) -#define EXYNOS5_IRQ_SYSMMU_MCUISP_0 COMBINER_IRQ(5, 4) -#define EXYNOS5_IRQ_SYSMMU_MCUISP_1 COMBINER_IRQ(5, 5) -#define EXYNOS5_IRQ_SYSMMU_3DNR_0 COMBINER_IRQ(5, 6) -#define EXYNOS5_IRQ_SYSMMU_3DNR_1 COMBINER_IRQ(5, 7) - -#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0) -#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1) -#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(6, 2) -#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(6, 3) -#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4) -#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5) -#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6) -#define EXYNOS5_IRQ_SYSMMU_SSS_1 COMBINER_IRQ(6, 7) - -#define EXYNOS5_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(7, 0) -#define EXYNOS5_IRQ_SYSMMU_MDMA0_1 COMBINER_IRQ(7, 1) -#define EXYNOS5_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(7, 2) -#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3) -#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4) -#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5) - -#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(8, 5) -#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(8, 6) - -#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4) -#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5) - -#define EXYNOS5_IRQ_DP COMBINER_IRQ(10, 3) -#define EXYNOS5_IRQ_SYSMMU_DIS0_0 COMBINER_IRQ(10, 4) -#define EXYNOS5_IRQ_SYSMMU_DIS0_1 COMBINER_IRQ(10, 5) -#define EXYNOS5_IRQ_SYSMMU_ISP_0 COMBINER_IRQ(10, 6) -#define EXYNOS5_IRQ_SYSMMU_ISP_1 COMBINER_IRQ(10, 7) - -#define EXYNOS5_IRQ_SYSMMU_ODC_0 COMBINER_IRQ(11, 0) -#define EXYNOS5_IRQ_SYSMMU_ODC_1 COMBINER_IRQ(11, 1) -#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6) -#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7) - -#define EXYNOS5_IRQ_MDMA1_ABORT COMBINER_IRQ(13, 1) - -#define EXYNOS5_IRQ_MDMA0_ABORT COMBINER_IRQ(15, 3) - -#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4) -#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5) -#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6) - -#define EXYNOS5_IRQ_ARMIOP_GIC COMBINER_IRQ(19, 0) -#define EXYNOS5_IRQ_ARMISP_GIC COMBINER_IRQ(19, 1) -#define EXYNOS5_IRQ_IOP_GIC COMBINER_IRQ(19, 3) -#define EXYNOS5_IRQ_ISP_GIC COMBINER_IRQ(19, 4) - -#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4) - -#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0) - -#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0) -#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1) -#define EXYNOS5_IRQ_SYSMMU_LITE1_1 COMBINER_IRQ(24, 2) -#define EXYNOS5_IRQ_SYSMMU_2D_0 COMBINER_IRQ(24, 5) -#define EXYNOS5_IRQ_SYSMMU_2D_1 COMBINER_IRQ(24, 6) - -#define EXYNOS5_IRQ_EINT2 COMBINER_IRQ(25, 0) -#define EXYNOS5_IRQ_EINT3 COMBINER_IRQ(25, 1) - -#define EXYNOS5_IRQ_EINT4 COMBINER_IRQ(26, 0) -#define EXYNOS5_IRQ_EINT5 COMBINER_IRQ(26, 1) - -#define EXYNOS5_IRQ_EINT6 COMBINER_IRQ(27, 0) -#define EXYNOS5_IRQ_EINT7 COMBINER_IRQ(27, 1) - -#define EXYNOS5_IRQ_EINT8 COMBINER_IRQ(28, 0) -#define EXYNOS5_IRQ_EINT9 COMBINER_IRQ(28, 1) - -#define EXYNOS5_IRQ_EINT10 COMBINER_IRQ(29, 0) -#define EXYNOS5_IRQ_EINT11 COMBINER_IRQ(29, 1) - -#define EXYNOS5_IRQ_EINT12 COMBINER_IRQ(30, 0) -#define EXYNOS5_IRQ_EINT13 COMBINER_IRQ(30, 1) - -#define EXYNOS5_IRQ_EINT14 COMBINER_IRQ(31, 0) -#define EXYNOS5_IRQ_EINT15 COMBINER_IRQ(31, 1) - -#define EXYNOS5_MAX_COMBINER_NR 32 - -#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 14 -#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9 -#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5 -#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1 - -#define MAX_COMBINER_NR (EXYNOS4_MAX_COMBINER_NR > EXYNOS5_MAX_COMBINER_NR ? \ - EXYNOS4_MAX_COMBINER_NR : EXYNOS5_MAX_COMBINER_NR) - -#define S5P_EINT_BASE1 COMBINER_IRQ(MAX_COMBINER_NR, 0) -#define S5P_EINT_BASE2 (S5P_EINT_BASE1 + 16) -#define S5P_GPIOINT_BASE (S5P_EINT_BASE1 + 32) -#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) -#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) - -/* Set the default NR_IRQS */ -#define EXYNOS_NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) - -#ifndef CONFIG_SPARSE_IRQ -#define NR_IRQS EXYNOS_NR_IRQS -#endif - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 92b29bb583c..7b046b59d9e 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -30,31 +30,6 @@ #define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 #define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 -#define EXYNOS4_PA_FIMC0 0x11800000 -#define EXYNOS4_PA_FIMC1 0x11810000 -#define EXYNOS4_PA_FIMC2 0x11820000 -#define EXYNOS4_PA_FIMC3 0x11830000 - -#define EXYNOS4_PA_JPEG 0x11840000 - -/* x = 0...1 */ -#define EXYNOS4_PA_FIMC_LITE(x) (0x12390000 + ((x) * 0x10000)) - -#define EXYNOS4_PA_G2D 0x12800000 - -#define EXYNOS4_PA_I2S0 0x03830000 -#define EXYNOS4_PA_I2S1 0xE3100000 -#define EXYNOS4_PA_I2S2 0xE2A00000 - -#define EXYNOS4_PA_PCM0 0x03840000 -#define EXYNOS4_PA_PCM1 0x13980000 -#define EXYNOS4_PA_PCM2 0x13990000 - -#define EXYNOS4_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) - -#define EXYNOS4_PA_ONENAND 0x0C000000 -#define EXYNOS4_PA_ONENAND_DMA 0x0C600000 - #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_SYSCON 0x10010000 @@ -71,10 +46,6 @@ #define EXYNOS4_PA_WATCHDOG 0x10060000 #define EXYNOS5_PA_WATCHDOG 0x101D0000 -#define EXYNOS4_PA_RTC 0x10070000 - -#define EXYNOS4_PA_KEYPAD 0x100A0000 - #define EXYNOS4_PA_DMC0 0x10400000 #define EXYNOS4_PA_DMC1 0x10410000 @@ -87,207 +58,22 @@ #define EXYNOS5_PA_GIC_DIST 0x10481000 #define EXYNOS4_PA_COREPERI 0x10500000 -#define EXYNOS4_PA_TWD 0x10500600 #define EXYNOS4_PA_L2CC 0x10502000 -#define EXYNOS4_PA_TMU 0x100C0000 - -#define EXYNOS4_PA_MDMA0 0x10810000 -#define EXYNOS4_PA_MDMA1 0x12850000 -#define EXYNOS4_PA_S_MDMA1 0x12840000 -#define EXYNOS4_PA_PDMA0 0x12680000 -#define EXYNOS4_PA_PDMA1 0x12690000 -#define EXYNOS5_PA_MDMA0 0x10800000 -#define EXYNOS5_PA_MDMA1 0x11C10000 -#define EXYNOS5_PA_PDMA0 0x121A0000 -#define EXYNOS5_PA_PDMA1 0x121B0000 - -#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 -#define EXYNOS4_PA_SYSMMU_2D_ACP 0x10A40000 -#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 -#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000 -#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000 -#define EXYNOS4_PA_SYSMMU_FIMC2 0x11A40000 -#define EXYNOS4_PA_SYSMMU_FIMC3 0x11A50000 -#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000 -#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000 -#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000 -#define EXYNOS4_PA_SYSMMU_FIMC_ISP 0x12260000 -#define EXYNOS4_PA_SYSMMU_FIMC_DRC 0x12270000 -#define EXYNOS4_PA_SYSMMU_FIMC_FD 0x122A0000 -#define EXYNOS4_PA_SYSMMU_ISPCPU 0x122B0000 -#define EXYNOS4_PA_SYSMMU_FIMC_LITE0 0x123B0000 -#define EXYNOS4_PA_SYSMMU_FIMC_LITE1 0x123C0000 -#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000 -#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000 -#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000 -#define EXYNOS4_PA_SYSMMU_MDMA2 0x12A40000 -#define EXYNOS4_PA_SYSMMU_TV 0x12E20000 -#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000 -#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000 - -#define EXYNOS5_PA_GSC0 0x13E00000 -#define EXYNOS5_PA_GSC1 0x13E10000 -#define EXYNOS5_PA_GSC2 0x13E20000 -#define EXYNOS5_PA_GSC3 0x13E30000 - -#define EXYNOS5_PA_SYSMMU_MDMA1 0x10A40000 -#define EXYNOS5_PA_SYSMMU_SSS 0x10A50000 -#define EXYNOS5_PA_SYSMMU_2D 0x10A60000 -#define EXYNOS5_PA_SYSMMU_MFC_L 0x11200000 -#define EXYNOS5_PA_SYSMMU_MFC_R 0x11210000 -#define EXYNOS5_PA_SYSMMU_ROTATOR 0x11D40000 -#define EXYNOS5_PA_SYSMMU_MDMA2 0x11D50000 -#define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000 -#define EXYNOS5_PA_SYSMMU_IOP 0x12360000 -#define EXYNOS5_PA_SYSMMU_RTIC 0x12370000 -#define EXYNOS5_PA_SYSMMU_ISP 0x13260000 -#define EXYNOS5_PA_SYSMMU_DRC 0x12370000 -#define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000 -#define EXYNOS5_PA_SYSMMU_SCALERP 0x13290000 -#define EXYNOS5_PA_SYSMMU_FD 0x132A0000 -#define EXYNOS5_PA_SYSMMU_ISPCPU 0x132B0000 -#define EXYNOS5_PA_SYSMMU_ODC 0x132C0000 -#define EXYNOS5_PA_SYSMMU_DIS0 0x132D0000 -#define EXYNOS5_PA_SYSMMU_DIS1 0x132E0000 -#define EXYNOS5_PA_SYSMMU_3DNR 0x132F0000 -#define EXYNOS5_PA_SYSMMU_LITE0 0x13C40000 -#define EXYNOS5_PA_SYSMMU_LITE1 0x13C50000 -#define EXYNOS5_PA_SYSMMU_GSC0 0x13E80000 -#define EXYNOS5_PA_SYSMMU_GSC1 0x13E90000 -#define EXYNOS5_PA_SYSMMU_GSC2 0x13EA0000 -#define EXYNOS5_PA_SYSMMU_GSC3 0x13EB0000 -#define EXYNOS5_PA_SYSMMU_FIMD1 0x14640000 -#define EXYNOS5_PA_SYSMMU_TV 0x14650000 - -#define EXYNOS4_PA_SPI0 0x13920000 -#define EXYNOS4_PA_SPI1 0x13930000 -#define EXYNOS4_PA_SPI2 0x13940000 -#define EXYNOS5_PA_SPI0 0x12D20000 -#define EXYNOS5_PA_SPI1 0x12D30000 -#define EXYNOS5_PA_SPI2 0x12D40000 - -#define EXYNOS4_PA_GPIO1 0x11400000 -#define EXYNOS4_PA_GPIO2 0x11000000 -#define EXYNOS4_PA_GPIO3 0x03860000 -#define EXYNOS5_PA_GPIO1 0x11400000 -#define EXYNOS5_PA_GPIO2 0x13400000 -#define EXYNOS5_PA_GPIO3 0x10D10000 -#define EXYNOS5_PA_GPIO4 0x03860000 - -#define EXYNOS4_PA_MIPI_CSIS0 0x11880000 -#define EXYNOS4_PA_MIPI_CSIS1 0x11890000 - -#define EXYNOS4_PA_FIMD0 0x11C00000 - -#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) -#define EXYNOS4_PA_DWMCI 0x12550000 -#define EXYNOS5_PA_DWMCI0 0x12200000 -#define EXYNOS5_PA_DWMCI1 0x12210000 -#define EXYNOS5_PA_DWMCI2 0x12220000 -#define EXYNOS5_PA_DWMCI3 0x12230000 - -#define EXYNOS4_PA_HSOTG 0x12480000 -#define EXYNOS4_PA_USB_HSPHY 0x125B0000 - -#define EXYNOS4_PA_SATA 0x12560000 -#define EXYNOS4_PA_SATAPHY 0x125D0000 -#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000 - #define EXYNOS4_PA_SROMC 0x12570000 #define EXYNOS5_PA_SROMC 0x12250000 -#define EXYNOS4_PA_EHCI 0x12580000 -#define EXYNOS4_PA_OHCI 0x12590000 #define EXYNOS4_PA_HSPHY 0x125B0000 -#define EXYNOS4_PA_MFC 0x13400000 #define EXYNOS4_PA_UART 0x13800000 #define EXYNOS5_PA_UART 0x12C00000 -#define EXYNOS4_PA_VP 0x12C00000 -#define EXYNOS4_PA_MIXER 0x12C10000 -#define EXYNOS4_PA_SDO 0x12C20000 -#define EXYNOS4_PA_HDMI 0x12D00000 -#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000 - -#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) -#define EXYNOS5_PA_IIC(x) (0x12C60000 + ((x) * 0x10000)) - -#define EXYNOS4_PA_ADC 0x13910000 -#define EXYNOS4_PA_ADC1 0x13911000 - -#define EXYNOS4_PA_AC97 0x139A0000 - -#define EXYNOS4_PA_SPDIF 0x139B0000 - #define EXYNOS4_PA_TIMER 0x139D0000 #define EXYNOS5_PA_TIMER 0x12DD0000 -#define EXYNOS4_PA_SDRAM 0x40000000 -#define EXYNOS5_PA_SDRAM 0x40000000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_HSMMC0 EXYNOS4_PA_HSMMC(0) -#define S3C_PA_HSMMC1 EXYNOS4_PA_HSMMC(1) -#define S3C_PA_HSMMC2 EXYNOS4_PA_HSMMC(2) -#define S3C_PA_HSMMC3 EXYNOS4_PA_HSMMC(3) -#define S3C_PA_IIC EXYNOS4_PA_IIC(0) -#define S3C_PA_IIC1 EXYNOS4_PA_IIC(1) -#define S3C_PA_IIC2 EXYNOS4_PA_IIC(2) -#define S3C_PA_IIC3 EXYNOS4_PA_IIC(3) -#define S3C_PA_IIC4 EXYNOS4_PA_IIC(4) -#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5) -#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6) -#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7) -#define S3C_PA_RTC EXYNOS4_PA_RTC -#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG -#define S3C_PA_SPI0 EXYNOS4_PA_SPI0 -#define S3C_PA_SPI1 EXYNOS4_PA_SPI1 -#define S3C_PA_SPI2 EXYNOS4_PA_SPI2 -#define S3C_PA_USB_HSOTG EXYNOS4_PA_HSOTG - -#define S5P_PA_EHCI EXYNOS4_PA_EHCI -#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0 -#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1 -#define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2 -#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3 -#define S5P_PA_JPEG EXYNOS4_PA_JPEG -#define S5P_PA_G2D EXYNOS4_PA_G2D -#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0 -#define S5P_PA_HDMI EXYNOS4_PA_HDMI -#define S5P_PA_IIC_HDMIPHY EXYNOS4_PA_IIC_HDMIPHY -#define S5P_PA_MFC EXYNOS4_PA_MFC -#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0 -#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1 -#define S5P_PA_MIXER EXYNOS4_PA_MIXER -#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND -#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA -#define S5P_PA_SDO EXYNOS4_PA_SDO -#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM -#define S5P_PA_VP EXYNOS4_PA_VP - -#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC -#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1 -#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD - /* Compatibility UART */ -#define EXYNOS4_PA_UART0 0x13800000 -#define EXYNOS4_PA_UART1 0x13810000 -#define EXYNOS4_PA_UART2 0x13820000 -#define EXYNOS4_PA_UART3 0x13830000 -#define EXYNOS4_SZ_UART SZ_256 - -#define EXYNOS5_PA_UART0 0x12C00000 -#define EXYNOS5_PA_UART1 0x12C10000 -#define EXYNOS5_PA_UART2 0x12C20000 -#define EXYNOS5_PA_UART3 0x12C30000 - #define EXYNOS5440_PA_UART0 0x000B0000 -#define EXYNOS5440_PA_UART1 0x000C0000 -#define EXYNOS5440_SZ_UART SZ_256 #define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index 296090e7f42..2b00833b664 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -34,12 +34,7 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - u32 eintmask = s3c_irqwake_eintmask; - - if (of_have_populated_dt()) - eintmask = exynos_get_eint_wake_mask(); - - __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK); + __raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK); __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } @@ -69,4 +64,9 @@ static inline void samsung_pm_saved_gpios(void) /* nothing here yet */ } +/* Compatibility definitions to make plat-samsung/pm.c compile */ +#define IRQ_EINT_BIT(x) 1 +#define s3c_irqwake_intallow 0 +#define s3c_irqwake_eintallow 0 + #endif /* __ASM_ARCH_PM_CORE_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-gpio.h b/arch/arm/mach-exynos/include/mach/regs-gpio.h deleted file mode 100644 index e4b5b60dcb8..00000000000 --- a/arch/arm/mach-exynos/include/mach/regs-gpio.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/regs-gpio.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - GPIO (including EINT) register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H __FILE__ - -#include <mach/map.h> -#include <mach/irqs.h> - -#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) -#define EINT_CON(b, x) (b + 0xE00 + (EINT_REG_NR(x) * 4)) -#define EINT_FLTCON(b, x) (b + 0xE80 + (EINT_REG_NR(x) * 4)) -#define EINT_MASK(b, x) (b + 0xF00 + (EINT_REG_NR(x) * 4)) -#define EINT_PEND(b, x) (b + 0xF40 + (EINT_REG_NR(x) * 4)) - -#define EINT_OFFSET_BIT(x) (1 << (EINT_OFFSET(x) & 0x7)) - -/* compatibility for plat-s5p/irq-pm.c */ -#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00) -#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4)) - -#define EXYNOS4_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80) -#define S5P_EINT_FLTCON(x) (EXYNOS4_EINT40FLTCON0 + ((x) * 0x4)) - -#define EXYNOS4_EINT40MASK (S5P_VA_GPIO2 + 0xF00) -#define S5P_EINT_MASK(x) (EXYNOS4_EINT40MASK + ((x) * 0x4)) - -#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40) -#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4)) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h deleted file mode 100644 index 07277735252..00000000000 --- a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PLAT_S5P_REGS_USB_PHY_H -#define __PLAT_S5P_REGS_USB_PHY_H - -#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY) - -#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00) -#define PHY1_HSIC_NORMAL_MASK (0xf << 9) -#define PHY1_HSIC1_SLEEP (1 << 12) -#define PHY1_HSIC1_FORCE_SUSPEND (1 << 11) -#define PHY1_HSIC0_SLEEP (1 << 10) -#define PHY1_HSIC0_FORCE_SUSPEND (1 << 9) - -#define PHY1_STD_NORMAL_MASK (0x7 << 6) -#define PHY1_STD_SLEEP (1 << 8) -#define PHY1_STD_ANALOG_POWERDOWN (1 << 7) -#define PHY1_STD_FORCE_SUSPEND (1 << 6) - -#define PHY0_NORMAL_MASK (0x39 << 0) -#define PHY0_SLEEP (1 << 5) -#define PHY0_OTG_DISABLE (1 << 4) -#define PHY0_ANALOG_POWERDOWN (1 << 3) -#define PHY0_FORCE_SUSPEND (1 << 0) - -#define EXYNOS4_PHYCLK EXYNOS4_HSOTG_PHYREG(0x04) -#define PHY1_COMMON_ON_N (1 << 7) -#define PHY0_COMMON_ON_N (1 << 4) -#define PHY0_ID_PULLUP (1 << 2) - -#define EXYNOS4_CLKSEL_SHIFT (0) - -#define EXYNOS4210_CLKSEL_MASK (0x3 << 0) -#define EXYNOS4210_CLKSEL_48M (0x0 << 0) -#define EXYNOS4210_CLKSEL_12M (0x2 << 0) -#define EXYNOS4210_CLKSEL_24M (0x3 << 0) - -#define EXYNOS4X12_CLKSEL_MASK (0x7 << 0) -#define EXYNOS4X12_CLKSEL_9600K (0x0 << 0) -#define EXYNOS4X12_CLKSEL_10M (0x1 << 0) -#define EXYNOS4X12_CLKSEL_12M (0x2 << 0) -#define EXYNOS4X12_CLKSEL_19200K (0x3 << 0) -#define EXYNOS4X12_CLKSEL_20M (0x4 << 0) -#define EXYNOS4X12_CLKSEL_24M (0x5 << 0) - -#define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08) -#define HOST_LINK_PORT_SWRST_MASK (0xf << 6) -#define HOST_LINK_PORT2_SWRST (1 << 9) -#define HOST_LINK_PORT1_SWRST (1 << 8) -#define HOST_LINK_PORT0_SWRST (1 << 7) -#define HOST_LINK_ALL_SWRST (1 << 6) - -#define PHY1_SWRST_MASK (0x7 << 3) -#define PHY1_HSIC_SWRST (1 << 5) -#define PHY1_STD_SWRST (1 << 4) -#define PHY1_ALL_SWRST (1 << 3) - -#define PHY0_SWRST_MASK (0x7 << 0) -#define PHY0_PHYLINK_SWRST (1 << 2) -#define PHY0_HLINK_SWRST (1 << 1) -#define PHY0_SWRST (1 << 0) - -#define EXYNOS4_PHY1CON EXYNOS4_HSOTG_PHYREG(0x34) -#define FPENABLEN (1 << 0) - -#endif /* __PLAT_S5P_REGS_USB_PHY_H */ diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c deleted file mode 100644 index 5f0f5570137..00000000000 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ /dev/null @@ -1,207 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-armlex4210.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gpio.h> -#include <linux/io.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/smsc911x.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> -#include <plat/regs-srom.h> -#include <plat/sdhci.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = ARMLEX4210_UCON_DEFAULT, - .ulcon = ARMLEX4210_ULCON_DEFAULT, - .ufcon = ARMLEX4210_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = ARMLEX4210_UCON_DEFAULT, - .ulcon = ARMLEX4210_ULCON_DEFAULT, - .ufcon = ARMLEX4210_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = ARMLEX4210_UCON_DEFAULT, - .ulcon = ARMLEX4210_ULCON_DEFAULT, - .ufcon = ARMLEX4210_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = ARMLEX4210_UCON_DEFAULT, - .ulcon = ARMLEX4210_ULCON_DEFAULT, - .ufcon = ARMLEX4210_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_PERMANENT, -#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPX2(5), - .ext_cd_gpio_invert = 1, - .max_width = 4, -}; - -static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_PERMANENT, - .max_width = 4, -}; - -static void __init armlex4210_sdhci_init(void) -{ - s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata); - s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata); -} - -static void __init armlex4210_wlan_init(void) -{ - /* enable */ - s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP); - - /* reset */ - s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP); - - /* wakeup */ - s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP); -} - -static struct resource armlex4210_smsc911x_resources[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K), - [1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \ - | IRQF_TRIGGER_HIGH), -}; - -static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, - .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, -}; - -static struct platform_device armlex4210_smsc911x = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources), - .resource = armlex4210_smsc911x_resources, - .dev = { - .platform_data = &smsc9215_config, - }, -}; - -static struct platform_device *armlex4210_devices[] __initdata = { - &s3c_device_hsmmc0, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_rtc, - &s3c_device_wdt, - &armlex4210_smsc911x, - &exynos4_device_ahci, -}; - -static void __init armlex4210_smsc911x_init(void) -{ - u32 cs1; - - /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5P_SROM_BW) & - ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | - (0 << S5P_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5P_SROM_BW__ADDRMODE__SHIFT) | - (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << - S5P_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5P_SROM_BW); - - /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | - (0x9 << S5P_SROM_BCX__TACP__SHIFT) | - (0xc << S5P_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5P_SROM_BCX__TACC__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); -} - -static void __init armlex4210_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(armlex4210_uartcfgs, - ARRAY_SIZE(armlex4210_uartcfgs)); -} - -static void __init armlex4210_machine_init(void) -{ - armlex4210_smsc911x_init(); - - armlex4210_sdhci_init(); - - armlex4210_wlan_init(); - - platform_add_devices(armlex4210_devices, - ARRAY_SIZE(armlex4210_devices)); -} - -MACHINE_START(ARMLEX4210, "ARMLEX4210") - /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = armlex4210_map_io, - .init_machine = armlex4210_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .restart = exynos4_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index b9ed834a7ee..0099c6c13bb 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -23,11 +23,6 @@ #include "common.h" -static void __init exynos4_dt_map_io(void) -{ - exynos_init_io(NULL, 0); -} - static void __init exynos4_dt_machine_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -55,8 +50,7 @@ static void __init exynos4_reserve(void) DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = exynos4_dt_map_io, + .map_io = exynos_init_io, .init_early = exynos_firmware_init, .init_machine = exynos4_dt_machine_init, .init_late = exynos_init_late, diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 753b94f3fca..d5c8afdeaa3 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -23,11 +23,6 @@ #include "common.h" -static void __init exynos5_dt_map_io(void) -{ - exynos_init_io(NULL, 0); -} - static void __init exynos5_dt_machine_init(void) { struct device_node *i2c_np; @@ -76,9 +71,8 @@ static void __init exynos5_reserve(void) DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .init_irq = exynos5_init_irq, .smp = smp_ops(exynos_smp_ops), - .map_io = exynos5_dt_map_io, + .map_io = exynos_init_io, .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, .init_time = exynos_init_time, diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c deleted file mode 100644 index 5c8b2878dbb..00000000000 --- a/arch/arm/mach-exynos/mach-nuri.c +++ /dev/null @@ -1,1388 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/mach-nuri.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/i2c/atmel_mxt_ts.h> -#include <linux/i2c-gpio.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/power/max8903_charger.h> -#include <linux/power/max17042_battery.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/mfd/max8997.h> -#include <linux/mfd/max8997-private.h> -#include <linux/mmc/host.h> -#include <linux/fb.h> -#include <linux/pwm_backlight.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/mipi-csis.h> -#include <linux/platform_data/s3c-hsotg.h> -#include <linux/platform_data/usb-ehci-s5p.h> -#include <drm/exynos_drm.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> -#include <media/m5mols.h> -#include <media/s5k6aa.h> -#include <media/s5p_fimc.h> -#include <media/v4l2-mediabus.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <plat/adc.h> -#include <plat/regs-serial.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/fb.h> -#include <plat/sdhci.h> -#include <plat/clock.h> -#include <plat/gpio-cfg.h> -#include <plat/mfc.h> -#include <plat/fimc-core.h> -#include <plat/camport.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG256 | \ - S5PV210_UFCON_RXTRIG256) - -enum fixed_regulator_id { - FIXED_REG_ID_MMC = 0, - FIXED_REG_ID_MAX8903, - FIXED_REG_ID_CAM_A28V, - FIXED_REG_ID_CAM_12V, - FIXED_REG_ID_CAM_VT_15V, -}; - -static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { - { - .hwport = 0, - .ucon = NURI_UCON_DEFAULT, - .ulcon = NURI_ULCON_DEFAULT, - .ufcon = NURI_UFCON_DEFAULT, - }, - { - .hwport = 1, - .ucon = NURI_UCON_DEFAULT, - .ulcon = NURI_ULCON_DEFAULT, - .ufcon = NURI_UFCON_DEFAULT, - }, - { - .hwport = 2, - .ucon = NURI_UCON_DEFAULT, - .ulcon = NURI_ULCON_DEFAULT, - .ufcon = NURI_UFCON_DEFAULT, - }, - { - .hwport = 3, - .ucon = NURI_UCON_DEFAULT, - .ulcon = NURI_ULCON_DEFAULT, - .ufcon = NURI_UFCON_DEFAULT, - }, -}; - -/* eMMC */ -static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { - .max_width = 8, - .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_ERASE), - .cd_type = S3C_SDHCI_CD_PERMANENT, -}; - -static struct regulator_consumer_supply emmc_supplies[] = { - REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"), - REGULATOR_SUPPLY("vmmc", "dw_mmc"), -}; - -static struct regulator_init_data emmc_fixed_voltage_init_data = { - .constraints = { - .name = "VMEM_VDD_2.8V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(emmc_supplies), - .consumer_supplies = emmc_supplies, -}; - -static struct fixed_voltage_config emmc_fixed_voltage_config = { - .supply_name = "MASSMEMORY_EN (inverted)", - .microvolts = 2800000, - .gpio = EXYNOS4_GPL1(1), - .enable_high = false, - .init_data = &emmc_fixed_voltage_init_data, -}; - -static struct platform_device emmc_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = FIXED_REG_ID_MMC, - .dev = { - .platform_data = &emmc_fixed_voltage_config, - }, -}; - -/* SD */ -static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */ - .ext_cd_gpio_invert = 1, - .cd_type = S3C_SDHCI_CD_GPIO, -}; - -/* WLAN */ -static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .cd_type = S3C_SDHCI_CD_EXTERNAL, -}; - -static void __init nuri_sdhci_init(void) -{ - s3c_sdhci0_set_platdata(&nuri_hsmmc0_data); - s3c_sdhci2_set_platdata(&nuri_hsmmc2_data); - s3c_sdhci3_set_platdata(&nuri_hsmmc3_data); -} - -/* GPIO KEYS */ -static struct gpio_keys_button nuri_gpio_keys_tables[] = { - { - .code = KEY_VOLUMEUP, - .gpio = EXYNOS4_GPX2(0), /* XEINT16 */ - .desc = "gpio-keys: KEY_VOLUMEUP", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_VOLUMEDOWN, - .gpio = EXYNOS4_GPX2(1), /* XEINT17 */ - .desc = "gpio-keys: KEY_VOLUMEDOWN", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_POWER, - .gpio = EXYNOS4_GPX2(7), /* XEINT23 */ - .desc = "gpio-keys: KEY_POWER", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data nuri_gpio_keys_data = { - .buttons = nuri_gpio_keys_tables, - .nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables), -}; - -static struct platform_device nuri_gpio_keys = { - .name = "gpio-keys", - .dev = { - .platform_data = &nuri_gpio_keys_data, - }, -}; - -#ifdef CONFIG_DRM_EXYNOS -static struct exynos_drm_fimd_pdata drm_fimd_pdata = { - .panel = { - .timing = { - .xres = 1024, - .yres = 600, - .hsync_len = 40, - .left_margin = 79, - .right_margin = 200, - .vsync_len = 10, - .upper_margin = 10, - .lower_margin = 11, - .refresh = 60, - }, - }, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | - VIDCON0_CLKSEL_LCD, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .default_win = 3, - .bpp = 32, -}; - -#else -/* Frame Buffer */ -static struct s3c_fb_pd_win nuri_fb_win0 = { - .max_bpp = 24, - .default_bpp = 16, - .xres = 1024, - .yres = 600, - .virtual_x = 1024, - .virtual_y = 2 * 600, -}; - -static struct fb_videomode nuri_lcd_timing = { - .left_margin = 64, - .right_margin = 16, - .upper_margin = 64, - .lower_margin = 1, - .hsync_len = 48, - .vsync_len = 3, - .xres = 1024, - .yres = 600, - .refresh = 60, -}; - -static struct s3c_fb_platdata nuri_fb_pdata __initdata = { - .win[0] = &nuri_fb_win0, - .vtiming = &nuri_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | - VIDCON0_CLKSEL_LCD, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; -#endif - -static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power) -{ - int gpio = EXYNOS4_GPE1(5); - - gpio_request(gpio, "LVDS_nSHDN"); - gpio_direction_output(gpio, power); - gpio_free(gpio); -} - -static int nuri_bl_init(struct device *dev) -{ - return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW, - "LCD_LD0_EN"); -} - -static int nuri_bl_notify(struct device *dev, int brightness) -{ - if (brightness < 1) - brightness = 0; - - gpio_set_value(EXYNOS4_GPE2(3), 1); - - return brightness; -} - -static void nuri_bl_exit(struct device *dev) -{ - gpio_free(EXYNOS4_GPE2(3)); -} - -/* nuri pwm backlight */ -static struct platform_pwm_backlight_data nuri_backlight_data = { - .pwm_id = 0, - .pwm_period_ns = 30000, - .max_brightness = 100, - .dft_brightness = 50, - .init = nuri_bl_init, - .notify = nuri_bl_notify, - .exit = nuri_bl_exit, -}; - -static struct platform_device nuri_backlight_device = { - .name = "pwm-backlight", - .id = -1, - .dev = { - .parent = &s3c_device_timer[0].dev, - .platform_data = &nuri_backlight_data, - }, -}; - -static struct plat_lcd_data nuri_lcd_platform_data = { - .set_power = nuri_lcd_power_on, -}; - -static struct platform_device nuri_lcd_device = { - .name = "platform-lcd", - .id = -1, - .dev = { - .platform_data = &nuri_lcd_platform_data, - }, -}; - -/* I2C1 */ -static struct i2c_board_info i2c1_devs[] __initdata = { - /* Gyro, To be updated */ -}; - -/* TSP */ -static struct mxt_platform_data mxt_platform_data = { - .x_line = 18, - .y_line = 11, - .x_size = 1024, - .y_size = 600, - .blen = 0x1, - .threshold = 0x28, - .voltage = 2800000, /* 2.8V */ - .orient = MXT_DIAGONAL_COUNTER, - .irqflags = IRQF_TRIGGER_FALLING, -}; - -static struct s3c2410_platform_i2c i2c3_data __initdata = { - .flags = 0, - .bus_num = 3, - .slave_addr = 0x10, - .frequency = 400 * 1000, - .sda_delay = 100, -}; - -static struct i2c_board_info i2c3_devs[] __initdata = { - { - I2C_BOARD_INFO("atmel_mxt_ts", 0x4a), - .platform_data = &mxt_platform_data, - .irq = IRQ_EINT(4), - }, -}; - -static void __init nuri_tsp_init(void) -{ - int gpio; - - /* TOUCH_INT: XEINT_4 */ - gpio = EXYNOS4_GPX0(4); - gpio_request(gpio, "TOUCH_INT"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); -} - -static struct regulator_consumer_supply __initdata max8997_ldo1_[] = { - REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo3_[] = { - REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */ - REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo4_[] = { - REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo5_[] = { - REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */ -}; -static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = { - REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo7_[] = { - REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo8_[] = { - REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* USB */ - REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo11_[] = { - REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo12_[] = { - REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo13_[] = { - REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo14_[] = { - REGULATOR_SUPPLY("inmotor", "max8997-haptic"), -}; -static struct regulator_consumer_supply __initdata max8997_ldo15_[] = { - REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo16_[] = { - REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo18_[] = { - REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */ -}; -static struct regulator_consumer_supply __initdata max8997_buck1_[] = { - REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ -}; -static struct regulator_consumer_supply __initdata max8997_buck2_[] = { - REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */ -}; -static struct regulator_consumer_supply __initdata max8997_buck3_[] = { - REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */ -}; -static struct regulator_consumer_supply __initdata max8997_buck4_[] = { - REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */ -}; -static struct regulator_consumer_supply __initdata max8997_buck6_[] = { - REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */ -}; -static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = { - REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */ -}; -static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = { - REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */ -}; - -static struct regulator_consumer_supply __initdata max8997_charger_[] = { - REGULATOR_SUPPLY("vinchg1", "charger-manager.0"), -}; -static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = { - REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */ -}; - -static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = { - REGULATOR_SUPPLY("gps_clk", "bcm4751"), - REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"), - REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"), -}; - -static struct regulator_init_data __initdata max8997_ldo1_data = { - .constraints = { - .name = "VADC_3.3V_C210", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_), - .consumer_supplies = max8997_ldo1_, -}; - -static struct regulator_init_data __initdata max8997_ldo2_data = { - .constraints = { - .name = "VALIVE_1.1V_C210", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo3_data = { - .constraints = { - .name = "VUSB_1.1V_C210", - .min_uV = 1100000, - .max_uV = 1100000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_), - .consumer_supplies = max8997_ldo3_, -}; - -static struct regulator_init_data __initdata max8997_ldo4_data = { - .constraints = { - .name = "VMIPI_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_), - .consumer_supplies = max8997_ldo4_, -}; - -static struct regulator_init_data __initdata max8997_ldo5_data = { - .constraints = { - .name = "VHSIC_1.2V_C210", - .min_uV = 1200000, - .max_uV = 1200000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_), - .consumer_supplies = max8997_ldo5_, -}; - -static struct regulator_init_data __initdata max8997_ldo6_data = { - .constraints = { - .name = "VCC_1.8V_PDA", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer), - .consumer_supplies = nuri_max8997_ldo6_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo7_data = { - .constraints = { - .name = "CAM_ISP_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_), - .consumer_supplies = max8997_ldo7_, -}; - -static struct regulator_init_data __initdata max8997_ldo8_data = { - .constraints = { - .name = "VUSB+VDAC_3.3V_C210", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_), - .consumer_supplies = max8997_ldo8_, -}; - -static struct regulator_init_data __initdata max8997_ldo9_data = { - .constraints = { - .name = "VCC_2.8V_PDA", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo10_data = { - .constraints = { - .name = "VPLL_1.1V_C210", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo11_data = { - .constraints = { - .name = "LVDS_VDD3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .boot_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_), - .consumer_supplies = max8997_ldo11_, -}; - -static struct regulator_init_data __initdata max8997_ldo12_data = { - .constraints = { - .name = "VT_CAM_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_), - .consumer_supplies = max8997_ldo12_, -}; - -static struct regulator_init_data __initdata max8997_ldo13_data = { - .constraints = { - .name = "VTF_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_), - .consumer_supplies = max8997_ldo13_, -}; - -static struct regulator_init_data __initdata max8997_ldo14_data = { - .constraints = { - .name = "VCC_3.0V_MOTOR", - .min_uV = 3000000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_), - .consumer_supplies = max8997_ldo14_, -}; - -static struct regulator_init_data __initdata max8997_ldo15_data = { - .constraints = { - .name = "VTOUCH_ADVV2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_), - .consumer_supplies = max8997_ldo15_, -}; - -static struct regulator_init_data __initdata max8997_ldo16_data = { - .constraints = { - .name = "CAM_SENSOR_IO_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_), - .consumer_supplies = max8997_ldo16_, -}; - -static struct regulator_init_data __initdata max8997_ldo18_data = { - .constraints = { - .name = "VTOUCH_VDD2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_), - .consumer_supplies = max8997_ldo18_, -}; - -static struct regulator_init_data __initdata max8997_ldo21_data = { - .constraints = { - .name = "VDDQ_M1M2_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_buck1_data = { - .constraints = { - .name = "VARM_1.2V_C210", - .min_uV = 900000, - .max_uV = 1350000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_), - .consumer_supplies = max8997_buck1_, -}; - -static struct regulator_init_data __initdata max8997_buck2_data = { - .constraints = { - .name = "VINT_1.1V_C210", - .min_uV = 900000, - .max_uV = 1200000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_), - .consumer_supplies = max8997_buck2_, -}; - -static struct regulator_init_data __initdata max8997_buck3_data = { - .constraints = { - .name = "VG3D_1.1V_C210", - .min_uV = 900000, - .max_uV = 1100000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_), - .consumer_supplies = max8997_buck3_, -}; - -static struct regulator_init_data __initdata max8997_buck4_data = { - .constraints = { - .name = "CAM_ISP_CORE_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_), - .consumer_supplies = max8997_buck4_, -}; - -static struct regulator_init_data __initdata max8997_buck5_data = { - .constraints = { - .name = "VMEM_1.2V_C210", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_buck6_data = { - .constraints = { - .name = "CAM_AF_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_), - .consumer_supplies = max8997_buck6_, -}; - -static struct regulator_init_data __initdata max8997_buck7_data = { - .constraints = { - .name = "VCC_SUB_2.0V", - .min_uV = 2000000, - .max_uV = 2000000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_32khz_ap_data = { - .constraints = { - .name = "32KHz AP", - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_), - .consumer_supplies = max8997_32khz_ap_, -}; - -static struct regulator_init_data __initdata max8997_32khz_cp_data = { - .constraints = { - .name = "32KHz CP", - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_vichg_data = { - .constraints = { - .name = "VICHG", - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_esafeout1_data = { - .constraints = { - .name = "SAFEOUT1", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_), - .consumer_supplies = max8997_esafeout1_, -}; - -static struct regulator_init_data __initdata max8997_esafeout2_data = { - .constraints = { - .name = "SAFEOUT2", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_), - .consumer_supplies = max8997_esafeout2_, -}; - -static struct regulator_init_data __initdata max8997_charger_cv_data = { - .constraints = { - .name = "CHARGER_CV", - .min_uV = 4200000, - .max_uV = 4200000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data __initdata max8997_charger_data = { - .constraints = { - .name = "CHARGER", - .min_uA = 200000, - .max_uA = 950000, - .boot_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_CURRENT, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_charger_), - .consumer_supplies = max8997_charger_, -}; - -static struct regulator_init_data __initdata max8997_charger_topoff_data = { - .constraints = { - .name = "CHARGER TOPOFF", - .min_uA = 50000, - .max_uA = 200000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_), - .consumer_supplies = max8997_chg_toff_, -}; - -static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = { - { MAX8997_LDO1, &max8997_ldo1_data }, - { MAX8997_LDO2, &max8997_ldo2_data }, - { MAX8997_LDO3, &max8997_ldo3_data }, - { MAX8997_LDO4, &max8997_ldo4_data }, - { MAX8997_LDO5, &max8997_ldo5_data }, - { MAX8997_LDO6, &max8997_ldo6_data }, - { MAX8997_LDO7, &max8997_ldo7_data }, - { MAX8997_LDO8, &max8997_ldo8_data }, - { MAX8997_LDO9, &max8997_ldo9_data }, - { MAX8997_LDO10, &max8997_ldo10_data }, - { MAX8997_LDO11, &max8997_ldo11_data }, - { MAX8997_LDO12, &max8997_ldo12_data }, - { MAX8997_LDO13, &max8997_ldo13_data }, - { MAX8997_LDO14, &max8997_ldo14_data }, - { MAX8997_LDO15, &max8997_ldo15_data }, - { MAX8997_LDO16, &max8997_ldo16_data }, - - { MAX8997_LDO18, &max8997_ldo18_data }, - { MAX8997_LDO21, &max8997_ldo21_data }, - - { MAX8997_BUCK1, &max8997_buck1_data }, - { MAX8997_BUCK2, &max8997_buck2_data }, - { MAX8997_BUCK3, &max8997_buck3_data }, - { MAX8997_BUCK4, &max8997_buck4_data }, - { MAX8997_BUCK5, &max8997_buck5_data }, - { MAX8997_BUCK6, &max8997_buck6_data }, - { MAX8997_BUCK7, &max8997_buck7_data }, - - { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data }, - { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data }, - - { MAX8997_ENVICHG, &max8997_vichg_data }, - { MAX8997_ESAFEOUT1, &max8997_esafeout1_data }, - { MAX8997_ESAFEOUT2, &max8997_esafeout2_data }, - { MAX8997_CHARGER_CV, &max8997_charger_cv_data }, - { MAX8997_CHARGER, &max8997_charger_data }, - { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data }, -}; - -static struct max8997_platform_data __initdata nuri_max8997_pdata = { - .wakeup = 1, - - .num_regulators = ARRAY_SIZE(nuri_max8997_regulators), - .regulators = nuri_max8997_regulators, - - .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) }, - - .buck1_voltage[0] = 1350000, /* 1.35V */ - .buck1_voltage[1] = 1300000, /* 1.3V */ - .buck1_voltage[2] = 1250000, /* 1.25V */ - .buck1_voltage[3] = 1200000, /* 1.2V */ - .buck1_voltage[4] = 1150000, /* 1.15V */ - .buck1_voltage[5] = 1100000, /* 1.1V */ - .buck1_voltage[6] = 1000000, /* 1.0V */ - .buck1_voltage[7] = 950000, /* 0.95V */ - - .buck2_voltage[0] = 1100000, /* 1.1V */ - .buck2_voltage[1] = 1000000, /* 1.0V */ - .buck2_voltage[2] = 950000, /* 0.95V */ - .buck2_voltage[3] = 900000, /* 0.9V */ - .buck2_voltage[4] = 1100000, /* 1.1V */ - .buck2_voltage[5] = 1000000, /* 1.0V */ - .buck2_voltage[6] = 950000, /* 0.95V */ - .buck2_voltage[7] = 900000, /* 0.9V */ - - .buck5_voltage[0] = 1200000, /* 1.2V */ - .buck5_voltage[1] = 1200000, /* 1.2V */ - .buck5_voltage[2] = 1200000, /* 1.2V */ - .buck5_voltage[3] = 1200000, /* 1.2V */ - .buck5_voltage[4] = 1200000, /* 1.2V */ - .buck5_voltage[5] = 1200000, /* 1.2V */ - .buck5_voltage[6] = 1200000, /* 1.2V */ - .buck5_voltage[7] = 1200000, /* 1.2V */ -}; - -/* GPIO I2C 5 (PMIC) */ -enum { I2C5_MAX8997 }; -static struct i2c_board_info i2c5_devs[] __initdata = { - [I2C5_MAX8997] = { - I2C_BOARD_INFO("max8997", 0xCC >> 1), - .platform_data = &nuri_max8997_pdata, - }, -}; - -static struct max17042_platform_data nuri_battery_platform_data = { -}; - -/* GPIO I2C 9 (Fuel Gauge) */ -static struct i2c_gpio_platform_data i2c9_gpio_data = { - .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */ - .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */ -}; -static struct platform_device i2c9_gpio = { - .name = "i2c-gpio", - .id = 9, - .dev = { - .platform_data = &i2c9_gpio_data, - }, -}; -enum { I2C9_MAX17042}; -static struct i2c_board_info i2c9_devs[] __initdata = { - [I2C9_MAX17042] = { - I2C_BOARD_INFO("max17042", 0x36), - .platform_data = &nuri_battery_platform_data, - }, -}; - -/* MAX8903 Secondary Charger */ -static struct regulator_consumer_supply supplies_max8903[] = { - REGULATOR_SUPPLY("vinchg2", "charger-manager.0"), -}; - -static struct regulator_init_data max8903_charger_en_data = { - .constraints = { - .name = "VOUT_CHARGER", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(supplies_max8903), - .consumer_supplies = supplies_max8903, -}; - -static struct fixed_voltage_config max8903_charger_en = { - .supply_name = "VOUT_CHARGER", - .microvolts = 5000000, /* Assume 5VDC */ - .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */ - .enable_high = 0, /* Enable = Low */ - .enabled_at_boot = 1, - .init_data = &max8903_charger_en_data, -}; - -static struct platform_device max8903_fixed_reg_dev = { - .name = "reg-fixed-voltage", - .id = FIXED_REG_ID_MAX8903, - .dev = { .platform_data = &max8903_charger_en }, -}; - -static struct max8903_pdata nuri_max8903 = { - /* - * cen: don't control with the driver, let it be - * controlled by regulator above - */ - .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */ - /* uok, usus: not connected */ - .chg = EXYNOS4_GPE2(0), /* TA_nCHG */ - /* flt: vcc_1.8V_pda */ - .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */ - - .dc_valid = true, - .usb_valid = false, /* USB is not wired to MAX8903 */ -}; - -static struct platform_device nuri_max8903_device = { - .name = "max8903-charger", - .dev = { - .platform_data = &nuri_max8903, - }, -}; - -static void __init nuri_power_init(void) -{ - int gpio; - int ta_en = 0; - - gpio = EXYNOS4_GPX0(7); - gpio_request(gpio, "AP_PMIC_IRQ"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - - gpio = EXYNOS4_GPX2(3); - gpio_request(gpio, "FUEL_ALERT"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - - gpio = nuri_max8903.dok; - gpio_request(gpio, "TA_nCONNECTED"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - ta_en = gpio_get_value(gpio) ? 0 : 1; - - gpio = nuri_max8903.chg; - gpio_request(gpio, "TA_nCHG"); - gpio_direction_input(gpio); - - gpio = nuri_max8903.dcm; - gpio_request(gpio, "CURR_ADJ"); - gpio_direction_output(gpio, ta_en); -} - -/* USB EHCI */ -static struct s5p_ehci_platdata nuri_ehci_pdata; - -static void __init nuri_ehci_init(void) -{ - struct s5p_ehci_platdata *pdata = &nuri_ehci_pdata; - - s5p_ehci_set_platdata(pdata); -} - -/* USB OTG */ -static struct s3c_hsotg_plat nuri_hsotg_pdata; - -/* CAMERA */ -static struct regulator_consumer_supply cam_vt_cam15_supply = - REGULATOR_SUPPLY("vdd_core", "6-003c"); - -static struct regulator_init_data cam_vt_cam15_reg_init_data = { - .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, - .num_consumer_supplies = 1, - .consumer_supplies = &cam_vt_cam15_supply, -}; - -static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = { - .supply_name = "VT_CAM_1.5V", - .microvolts = 1500000, - .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */ - .enable_high = 1, - .init_data = &cam_vt_cam15_reg_init_data, -}; - -static struct platform_device cam_vt_cam15_fixed_rdev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V, - .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg }, -}; - -static struct regulator_consumer_supply cam_vdda_supply[] = { - REGULATOR_SUPPLY("vdda", "6-003c"), - REGULATOR_SUPPLY("a_sensor", "0-001f"), -}; - -static struct regulator_init_data cam_vdda_reg_init_data = { - .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, - .num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply), - .consumer_supplies = cam_vdda_supply, -}; - -static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = { - .supply_name = "CAM_IO_EN", - .microvolts = 2800000, - .gpio = EXYNOS4_GPE2(1), /* CAM_IO_EN */ - .enable_high = 1, - .init_data = &cam_vdda_reg_init_data, -}; - -static struct platform_device cam_vdda_fixed_rdev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V, - .dev = { .platform_data = &cam_vdda_fixed_voltage_cfg }, -}; - -static struct regulator_consumer_supply camera_8m_12v_supply = - REGULATOR_SUPPLY("dig_12", "0-001f"); - -static struct regulator_init_data cam_8m_12v_reg_init_data = { - .num_consumer_supplies = 1, - .consumer_supplies = &camera_8m_12v_supply, - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS - }, -}; - -static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = { - .supply_name = "8M_1.2V", - .microvolts = 1200000, - .gpio = EXYNOS4_GPE2(5), /* 8M_1.2V_EN */ - .enable_high = 1, - .init_data = &cam_8m_12v_reg_init_data, -}; - -static struct platform_device cam_8m_12v_fixed_rdev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V, - .dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg }, -}; - -static struct s5p_platform_mipi_csis mipi_csis_platdata = { - .clk_rate = 166000000UL, - .lanes = 2, - .hs_settle = 12, -}; - -#define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */ -#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5) -#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0) -#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1) - -static struct s5k6aa_platform_data s5k6aa_pldata = { - .mclk_frequency = 24000000UL, - .gpio_reset = { GPIO_CAM_VT_NRST, 0 }, - .gpio_stby = { GPIO_CAM_VT_NSTBY, 0 }, - .bus_type = V4L2_MBUS_PARALLEL, - .horiz_flip = 1, -}; - -static struct i2c_board_info s5k6aa_board_info = { - I2C_BOARD_INFO("S5K6AA", 0x3c), - .platform_data = &s5k6aa_pldata, -}; - -static struct m5mols_platform_data m5mols_platdata = { - .gpio_reset = GPIO_CAM_MEGA_RST, -}; - -static struct i2c_board_info m5mols_board_info = { - I2C_BOARD_INFO("M5MOLS", 0x1F), - .platform_data = &m5mols_platdata, -}; - -static struct fimc_source_info nuri_camera_sensors[] = { - { - .flags = V4L2_MBUS_PCLK_SAMPLE_RISING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, - .board_info = &s5k6aa_board_info, - .clk_frequency = 24000000UL, - .i2c_bus_num = 6, - }, { - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2, - .board_info = &m5mols_board_info, - .clk_frequency = 24000000UL, - }, -}; - -static struct s5p_platform_fimc fimc_md_platdata = { - .source_info = nuri_camera_sensors, - .num_clients = ARRAY_SIZE(nuri_camera_sensors), -}; - -static struct gpio nuri_camera_gpios[] = { - { GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, - { GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, - { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, - { GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, -}; - -static void __init nuri_camera_init(void) -{ - s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), - &s5p_device_mipi_csis0); - s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata), - &s5p_device_fimc_md); - - if (gpio_request_array(nuri_camera_gpios, - ARRAY_SIZE(nuri_camera_gpios))) { - pr_err("%s: GPIO request failed\n", __func__); - return; - } - - m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT); - if (m5mols_board_info.irq >= 0) - s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF)); - else - pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__); - - /* Free GPIOs controlled directly by the sensor drivers. */ - gpio_free(GPIO_CAM_VT_NRST); - gpio_free(GPIO_CAM_VT_NSTBY); - gpio_free(GPIO_CAM_MEGA_RST); - - if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) { - pr_err("%s: Camera port A setup failed\n", __func__); - return; - } - /* Increase drive strength of the sensor clock output */ - s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4); -} - -static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = { - .frequency = 400000U, - .sda_delay = 200, - .bus_num = 6, -}; - -static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = { - .frequency = 400000U, - .sda_delay = 200, -}; - -/* DEVFREQ controlling memory/bus */ -static struct platform_device exynos4_bus_devfreq = { - .name = "exynos4210-busfreq", -}; - -static struct platform_device *nuri_devices[] __initdata = { - /* Samsung Platform Devices */ - &s3c_device_i2c5, /* PMIC should initialize first */ - &s3c_device_i2c0, - &s3c_device_i2c6, - &emmc_fixed_voltage, - &s5p_device_mipi_csis0, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc3, - &s5p_device_fimd0, - &s3c_device_hsmmc0, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_wdt, - &s3c_device_timer[0], - &s5p_device_ehci, - &s3c_device_i2c3, - &i2c9_gpio, - &s3c_device_adc, - &s5p_device_g2d, - &s5p_device_jpeg, - &s3c_device_rtc, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &s5p_device_fimc_md, - &s3c_device_usb_hsotg, - - /* NURI Devices */ - &nuri_gpio_keys, - &nuri_lcd_device, - &nuri_backlight_device, - &max8903_fixed_reg_dev, - &nuri_max8903_device, - &cam_vt_cam15_fixed_rdev, - &cam_vdda_fixed_rdev, - &cam_8m_12v_fixed_rdev, - &exynos4_bus_devfreq, -}; - -static void __init nuri_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); - xxti_f = 0; - xusbxti_f = 24000000; -} - -static void __init nuri_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init nuri_machine_init(void) -{ - nuri_sdhci_init(); - nuri_tsp_init(); - nuri_power_init(); - - s3c_i2c0_set_platdata(&nuri_i2c0_platdata); - i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); - s3c_i2c3_set_platdata(&i2c3_data); - i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); - s3c_i2c5_set_platdata(NULL); - i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7)); - i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); - i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); - i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); - s3c_i2c6_set_platdata(&nuri_i2c6_platdata); - -#ifdef CONFIG_DRM_EXYNOS - s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; - exynos4_fimd0_gpio_setup_24bpp(); -#else - s5p_fimd0_set_platdata(&nuri_fb_pdata); -#endif - - nuri_camera_init(); - - nuri_ehci_init(); - s3c_hsotg_set_platdata(&nuri_hsotg_pdata); - - /* Last */ - platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); -} - -MACHINE_START(NURI, "NURI") - /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = nuri_map_io, - .init_machine = nuri_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .reserve = &nuri_reserve, - .restart = exynos4_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c deleted file mode 100644 index 27f03ed5d06..00000000000 --- a/arch/arm/mach-exynos/mach-origen.c +++ /dev/null @@ -1,823 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-origen.c - * - * Copyright (c) 2011 Insignal Co., Ltd. - * http://www.insignal.co.kr/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/serial_core.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/gpio_keys.h> -#include <linux/i2c.h> -#include <linux/regulator/machine.h> -#include <linux/mfd/max8997.h> -#include <linux/lcd.h> -#include <linux/rfkill-gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/s3c-hsotg.h> -#include <linux/platform_data/usb-ehci-s5p.h> -#include <linux/platform_data/usb-ohci-exynos.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> - -#include <plat/regs-serial.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/sdhci.h> -#include <plat/clock.h> -#include <plat/gpio-cfg.h> -#include <plat/backlight.h> -#include <plat/fb.h> -#include <plat/mfc.h> -#include <plat/hdmi.h> - -#include <mach/map.h> -#include <mach/irqs.h> - -#include <drm/exynos_drm.h> -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = ORIGEN_UCON_DEFAULT, - .ulcon = ORIGEN_ULCON_DEFAULT, - .ufcon = ORIGEN_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = ORIGEN_UCON_DEFAULT, - .ulcon = ORIGEN_ULCON_DEFAULT, - .ufcon = ORIGEN_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = ORIGEN_UCON_DEFAULT, - .ulcon = ORIGEN_ULCON_DEFAULT, - .ufcon = ORIGEN_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = ORIGEN_UCON_DEFAULT, - .ulcon = ORIGEN_ULCON_DEFAULT, - .ufcon = ORIGEN_UFCON_DEFAULT, - }, -}; - -static struct regulator_consumer_supply __initdata ldo3_consumer[] = { - REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */ - REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */ - REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */ - REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */ -}; -static struct regulator_consumer_supply __initdata ldo6_consumer[] = { - REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */ -}; -static struct regulator_consumer_supply __initdata ldo7_consumer[] = { - REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */ -}; -static struct regulator_consumer_supply __initdata ldo8_consumer[] = { - REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */ - REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */ - REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */ -}; -static struct regulator_consumer_supply __initdata ldo9_consumer[] = { - REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ -}; -static struct regulator_consumer_supply __initdata ldo11_consumer[] = { - REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */ -}; -static struct regulator_consumer_supply __initdata ldo14_consumer[] = { - REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ -}; -static struct regulator_consumer_supply __initdata ldo17_consumer[] = { - REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ -}; -static struct regulator_consumer_supply __initdata buck1_consumer[] = { - REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ -}; -static struct regulator_consumer_supply __initdata buck2_consumer[] = { - REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ -}; -static struct regulator_consumer_supply __initdata buck3_consumer[] = { - REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */ -}; -static struct regulator_consumer_supply __initdata buck7_consumer[] = { - REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */ -}; - -static struct regulator_init_data __initdata max8997_ldo1_data = { - .constraints = { - .name = "VDD_ABB_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo2_data = { - .constraints = { - .name = "VDD_ALIVE_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo3_data = { - .constraints = { - .name = "VMIPI_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo3_consumer), - .consumer_supplies = ldo3_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo4_data = { - .constraints = { - .name = "VDD_RTC_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo6_data = { - .constraints = { - .name = "VMIPI_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo6_consumer), - .consumer_supplies = ldo6_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo7_data = { - .constraints = { - .name = "VDD_AUD_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo7_consumer), - .consumer_supplies = ldo7_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo8_data = { - .constraints = { - .name = "VADC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo8_consumer), - .consumer_supplies = ldo8_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo9_data = { - .constraints = { - .name = "DVDD_SWB_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo9_consumer), - .consumer_supplies = ldo9_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo10_data = { - .constraints = { - .name = "VDD_PLL_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo11_data = { - .constraints = { - .name = "VDD_AUD_3V", - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo11_consumer), - .consumer_supplies = ldo11_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo14_data = { - .constraints = { - .name = "AVDD18_SWB_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo14_consumer), - .consumer_supplies = ldo14_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo17_data = { - .constraints = { - .name = "VDD_SWB_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo17_consumer), - .consumer_supplies = ldo17_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo21_data = { - .constraints = { - .name = "VDD_MIF_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_buck1_data = { - .constraints = { - .name = "VDD_ARM_1.2V", - .min_uV = 950000, - .max_uV = 1350000, - .always_on = 1, - .boot_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), - .consumer_supplies = buck1_consumer, -}; - -static struct regulator_init_data __initdata max8997_buck2_data = { - .constraints = { - .name = "VDD_INT_1.1V", - .min_uV = 900000, - .max_uV = 1100000, - .always_on = 1, - .boot_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), - .consumer_supplies = buck2_consumer, -}; - -static struct regulator_init_data __initdata max8997_buck3_data = { - .constraints = { - .name = "VDD_G3D_1.1V", - .min_uV = 900000, - .max_uV = 1100000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(buck3_consumer), - .consumer_supplies = buck3_consumer, -}; - -static struct regulator_init_data __initdata max8997_buck5_data = { - .constraints = { - .name = "VDDQ_M1M2_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_buck7_data = { - .constraints = { - .name = "VDD_LCD_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .boot_on = 1, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1 - }, - }, - .num_consumer_supplies = ARRAY_SIZE(buck7_consumer), - .consumer_supplies = buck7_consumer, -}; - -static struct max8997_regulator_data __initdata origen_max8997_regulators[] = { - { MAX8997_LDO1, &max8997_ldo1_data }, - { MAX8997_LDO2, &max8997_ldo2_data }, - { MAX8997_LDO3, &max8997_ldo3_data }, - { MAX8997_LDO4, &max8997_ldo4_data }, - { MAX8997_LDO6, &max8997_ldo6_data }, - { MAX8997_LDO7, &max8997_ldo7_data }, - { MAX8997_LDO8, &max8997_ldo8_data }, - { MAX8997_LDO9, &max8997_ldo9_data }, - { MAX8997_LDO10, &max8997_ldo10_data }, - { MAX8997_LDO11, &max8997_ldo11_data }, - { MAX8997_LDO14, &max8997_ldo14_data }, - { MAX8997_LDO17, &max8997_ldo17_data }, - { MAX8997_LDO21, &max8997_ldo21_data }, - { MAX8997_BUCK1, &max8997_buck1_data }, - { MAX8997_BUCK2, &max8997_buck2_data }, - { MAX8997_BUCK3, &max8997_buck3_data }, - { MAX8997_BUCK5, &max8997_buck5_data }, - { MAX8997_BUCK7, &max8997_buck7_data }, -}; - -static struct max8997_platform_data __initdata origen_max8997_pdata = { - .num_regulators = ARRAY_SIZE(origen_max8997_regulators), - .regulators = origen_max8997_regulators, - - .wakeup = true, - .buck1_gpiodvs = false, - .buck2_gpiodvs = false, - .buck5_gpiodvs = false, - - .ignore_gpiodvs_side_effect = true, - .buck125_default_idx = 0x0, - - .buck125_gpios[0] = EXYNOS4_GPX0(0), - .buck125_gpios[1] = EXYNOS4_GPX0(1), - .buck125_gpios[2] = EXYNOS4_GPX0(2), - - .buck1_voltage[0] = 1350000, - .buck1_voltage[1] = 1300000, - .buck1_voltage[2] = 1250000, - .buck1_voltage[3] = 1200000, - .buck1_voltage[4] = 1150000, - .buck1_voltage[5] = 1100000, - .buck1_voltage[6] = 1000000, - .buck1_voltage[7] = 950000, - - .buck2_voltage[0] = 1100000, - .buck2_voltage[1] = 1100000, - .buck2_voltage[2] = 1100000, - .buck2_voltage[3] = 1100000, - .buck2_voltage[4] = 1000000, - .buck2_voltage[5] = 1000000, - .buck2_voltage[6] = 1000000, - .buck2_voltage[7] = 1000000, - - .buck5_voltage[0] = 1200000, - .buck5_voltage[1] = 1200000, - .buck5_voltage[2] = 1200000, - .buck5_voltage[3] = 1200000, - .buck5_voltage[4] = 1200000, - .buck5_voltage[5] = 1200000, - .buck5_voltage[6] = 1200000, - .buck5_voltage[7] = 1200000, -}; - -/* I2C0 */ -static struct i2c_board_info i2c0_devs[] __initdata = { - { - I2C_BOARD_INFO("max8997", (0xCC >> 1)), - .platform_data = &origen_max8997_pdata, - .irq = IRQ_EINT(4), - }, -}; - -static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -}; - -static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -}; - -/* USB EHCI */ -static struct s5p_ehci_platdata origen_ehci_pdata; - -static void __init origen_ehci_init(void) -{ - struct s5p_ehci_platdata *pdata = &origen_ehci_pdata; - - s5p_ehci_set_platdata(pdata); -} - -/* USB OHCI */ -static struct exynos4_ohci_platdata origen_ohci_pdata; - -static void __init origen_ohci_init(void) -{ - struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata; - - exynos4_ohci_set_platdata(pdata); -} - -/* USB OTG */ -static struct s3c_hsotg_plat origen_hsotg_pdata; - -static struct gpio_led origen_gpio_leds[] = { - { - .name = "origen::status1", - .default_trigger = "heartbeat", - .gpio = EXYNOS4_GPX1(3), - .active_low = 1, - }, - { - .name = "origen::status2", - .default_trigger = "mmc0", - .gpio = EXYNOS4_GPX1(4), - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data origen_gpio_led_info = { - .leds = origen_gpio_leds, - .num_leds = ARRAY_SIZE(origen_gpio_leds), -}; - -static struct platform_device origen_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &origen_gpio_led_info, - }, -}; - -static struct gpio_keys_button origen_gpio_keys_table[] = { - { - .code = KEY_MENU, - .gpio = EXYNOS4_GPX1(5), - .desc = "gpio-keys: KEY_MENU", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, { - .code = KEY_HOME, - .gpio = EXYNOS4_GPX1(6), - .desc = "gpio-keys: KEY_HOME", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, { - .code = KEY_BACK, - .gpio = EXYNOS4_GPX1(7), - .desc = "gpio-keys: KEY_BACK", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, { - .code = KEY_UP, - .gpio = EXYNOS4_GPX2(0), - .desc = "gpio-keys: KEY_UP", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, { - .code = KEY_DOWN, - .gpio = EXYNOS4_GPX2(1), - .desc = "gpio-keys: KEY_DOWN", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data origen_gpio_keys_data = { - .buttons = origen_gpio_keys_table, - .nbuttons = ARRAY_SIZE(origen_gpio_keys_table), -}; - -static struct platform_device origen_device_gpiokeys = { - .name = "gpio-keys", - .dev = { - .platform_data = &origen_gpio_keys_data, - }, -}; - -static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power) -{ - int ret; - - if (power) - ret = gpio_request_one(EXYNOS4_GPE3(4), - GPIOF_OUT_INIT_HIGH, "GPE3_4"); - else - ret = gpio_request_one(EXYNOS4_GPE3(4), - GPIOF_OUT_INIT_LOW, "GPE3_4"); - - gpio_free(EXYNOS4_GPE3(4)); - - if (ret) - pr_err("failed to request gpio for LCD power: %d\n", ret); -} - -static struct plat_lcd_data origen_lcd_hv070wsa_data = { - .set_power = lcd_hv070wsa_set_power, -}; - -static struct platform_device origen_lcd_hv070wsa = { - .name = "platform-lcd", - .dev.parent = &s5p_device_fimd0.dev, - .dev.platform_data = &origen_lcd_hv070wsa_data, -}; - -static struct pwm_lookup origen_pwm_lookup[] = { - PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL), -}; - -#ifdef CONFIG_DRM_EXYNOS_FIMD -static struct exynos_drm_fimd_pdata drm_fimd_pdata = { - .panel = { - .timing = { - .left_margin = 64, - .right_margin = 16, - .upper_margin = 64, - .lower_margin = 16, - .hsync_len = 48, - .vsync_len = 3, - .xres = 1024, - .yres = 600, - }, - }, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | - VIDCON1_INV_VCLK, - .default_win = 0, - .bpp = 32, -}; -#else -static struct s3c_fb_pd_win origen_fb_win0 = { - .xres = 1024, - .yres = 600, - .max_bpp = 32, - .default_bpp = 24, - .virtual_x = 1024, - .virtual_y = 2 * 600, -}; - -static struct fb_videomode origen_lcd_timing = { - .left_margin = 64, - .right_margin = 16, - .upper_margin = 64, - .lower_margin = 16, - .hsync_len = 48, - .vsync_len = 3, - .xres = 1024, - .yres = 600, -}; - -static struct s3c_fb_platdata origen_lcd_pdata __initdata = { - .win[0] = &origen_fb_win0, - .vtiming = &origen_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | - VIDCON1_INV_VCLK, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; -#endif - -/* Bluetooth rfkill gpio platform data */ -static struct rfkill_gpio_platform_data origen_bt_pdata = { - .reset_gpio = EXYNOS4_GPX2(2), - .shutdown_gpio = -1, - .type = RFKILL_TYPE_BLUETOOTH, - .name = "origen-bt", -}; - -/* Bluetooth Platform device */ -static struct platform_device origen_device_bluetooth = { - .name = "rfkill_gpio", - .id = -1, - .dev = { - .platform_data = &origen_bt_pdata, - }, -}; - -static struct platform_device *origen_devices[] __initdata = { - &s3c_device_hsmmc2, - &s3c_device_hsmmc0, - &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_usb_hsotg, - &s3c_device_wdt, - &s5p_device_ehci, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc3, - &s5p_device_fimc_md, - &s5p_device_fimd0, - &s5p_device_g2d, - &s5p_device_hdmi, - &s5p_device_i2c_hdmiphy, - &s5p_device_jpeg, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &s5p_device_mixer, - &exynos4_device_ohci, - &origen_device_gpiokeys, - &origen_lcd_hv070wsa, - &origen_leds_gpio, - &origen_device_bluetooth, -}; - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info origen_bl_gpio_info = { - .no = EXYNOS4_GPD0(0), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data origen_bl_data = { - .pwm_id = 0, - .pwm_period_ns = 1000, -}; - -static void __init origen_bt_setup(void) -{ - gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART"); - /* 4 UART Pins configuration */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2)); - /* Setup BT Reset, this gpio will be requesed by rfkill-gpio */ - s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT); - s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); -} - -/* I2C module and id for HDMIPHY */ -static struct i2c_board_info hdmiphy_info = { - I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), -}; - -static void s5p_tv_setup(void) -{ - /* Direct HPD to HDMI chip */ - gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); - s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); - s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); -} - -static void __init origen_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); - xxti_f = 0; - xusbxti_f = 24000000; -} - -static void __init origen_power_init(void) -{ - gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ"); - s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE); -} - -static void __init origen_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init origen_machine_init(void) -{ - origen_power_init(); - - s3c_i2c0_set_platdata(NULL); - i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); - - /* - * Since sdhci instance 2 can contain a bootable media, - * sdhci instance 0 is registered after instance 2. - */ - s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata); - s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata); - - origen_ehci_init(); - origen_ohci_init(); - s3c_hsotg_set_platdata(&origen_hsotg_pdata); - - s5p_tv_setup(); - s5p_i2c_hdmiphy_set_platdata(NULL); - s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); - -#ifdef CONFIG_DRM_EXYNOS_FIMD - s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; - exynos4_fimd0_gpio_setup_24bpp(); -#else - s5p_fimd0_set_platdata(&origen_lcd_pdata); -#endif - - platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); - - pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup)); - samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); - - origen_bt_setup(); -} - -MACHINE_START(ORIGEN, "ORIGEN") - /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = origen_map_io, - .init_machine = origen_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .reserve = &origen_reserve, - .restart = exynos4_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c deleted file mode 100644 index 2c8af961792..00000000000 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/mach-smdk4x12.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/lcd.h> -#include <linux/mfd/max8997.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/regulator/machine.h> -#include <linux/serial_core.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/s3c-hsotg.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/samsung_fimd.h> -#include <plat/backlight.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/fb.h> -#include <plat/gpio-cfg.h> -#include <plat/keypad.h> -#include <plat/mfc.h> -#include <plat/regs-serial.h> -#include <plat/sdhci.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <drm/exynos_drm.h> -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK4X12_UCON_DEFAULT, - .ulcon = SMDK4X12_ULCON_DEFAULT, - .ufcon = SMDK4X12_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK4X12_UCON_DEFAULT, - .ulcon = SMDK4X12_ULCON_DEFAULT, - .ufcon = SMDK4X12_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK4X12_UCON_DEFAULT, - .ulcon = SMDK4X12_ULCON_DEFAULT, - .ufcon = SMDK4X12_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDK4X12_UCON_DEFAULT, - .ulcon = SMDK4X12_ULCON_DEFAULT, - .ufcon = SMDK4X12_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -}; - -static struct regulator_consumer_supply max8997_buck1 = - REGULATOR_SUPPLY("vdd_arm", NULL); - -static struct regulator_consumer_supply max8997_buck2 = - REGULATOR_SUPPLY("vdd_int", NULL); - -static struct regulator_consumer_supply max8997_buck3 = - REGULATOR_SUPPLY("vdd_g3d", NULL); - -static struct regulator_init_data max8997_buck1_data = { - .constraints = { - .name = "VDD_ARM_SMDK4X12", - .min_uV = 925000, - .max_uV = 1350000, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8997_buck1, -}; - -static struct regulator_init_data max8997_buck2_data = { - .constraints = { - .name = "VDD_INT_SMDK4X12", - .min_uV = 950000, - .max_uV = 1150000, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8997_buck2, -}; - -static struct regulator_init_data max8997_buck3_data = { - .constraints = { - .name = "VDD_G3D_SMDK4X12", - .min_uV = 950000, - .max_uV = 1150000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8997_buck3, -}; - -static struct max8997_regulator_data smdk4x12_max8997_regulators[] = { - { MAX8997_BUCK1, &max8997_buck1_data }, - { MAX8997_BUCK2, &max8997_buck2_data }, - { MAX8997_BUCK3, &max8997_buck3_data }, -}; - -static struct max8997_platform_data smdk4x12_max8997_pdata = { - .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators), - .regulators = smdk4x12_max8997_regulators, - - .buck1_voltage[0] = 1100000, /* 1.1V */ - .buck1_voltage[1] = 1100000, /* 1.1V */ - .buck1_voltage[2] = 1100000, /* 1.1V */ - .buck1_voltage[3] = 1100000, /* 1.1V */ - .buck1_voltage[4] = 1100000, /* 1.1V */ - .buck1_voltage[5] = 1100000, /* 1.1V */ - .buck1_voltage[6] = 1000000, /* 1.0V */ - .buck1_voltage[7] = 950000, /* 0.95V */ - - .buck2_voltage[0] = 1100000, /* 1.1V */ - .buck2_voltage[1] = 1000000, /* 1.0V */ - .buck2_voltage[2] = 950000, /* 0.95V */ - .buck2_voltage[3] = 900000, /* 0.9V */ - .buck2_voltage[4] = 1100000, /* 1.1V */ - .buck2_voltage[5] = 1000000, /* 1.0V */ - .buck2_voltage[6] = 950000, /* 0.95V */ - .buck2_voltage[7] = 900000, /* 0.9V */ - - .buck5_voltage[0] = 1100000, /* 1.1V */ - .buck5_voltage[1] = 1100000, /* 1.1V */ - .buck5_voltage[2] = 1100000, /* 1.1V */ - .buck5_voltage[3] = 1100000, /* 1.1V */ - .buck5_voltage[4] = 1100000, /* 1.1V */ - .buck5_voltage[5] = 1100000, /* 1.1V */ - .buck5_voltage[6] = 1100000, /* 1.1V */ - .buck5_voltage[7] = 1100000, /* 1.1V */ -}; - -static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = { - { - I2C_BOARD_INFO("max8997", 0x66), - .platform_data = &smdk4x12_max8997_pdata, - } -}; - -static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = { - { I2C_BOARD_INFO("wm8994", 0x1a), } -}; - -static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = { - /* nothing here yet */ -}; - -static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = { - /* nothing here yet */ -}; - -static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = { - .no = EXYNOS4_GPD0(1), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdk4x12_bl_data = { - .pwm_id = 1, - .pwm_period_ns = 1000, -}; - -static struct pwm_lookup smdk4x12_pwm_lookup[] = { - PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL), -}; - -static uint32_t smdk4x12_keymap[] __initdata = { - /* KEY(row, col, keycode) */ - KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3), - KEY(1, 6, KEY_4), KEY(1, 7, KEY_5), - KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B), - KEY(0, 7, KEY_E), KEY(0, 5, KEY_C) -}; - -static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { - .keymap = smdk4x12_keymap, - .keymap_size = ARRAY_SIZE(smdk4x12_keymap), -}; - -static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = { - .keymap_data = &smdk4x12_keymap_data, - .rows = 3, - .cols = 8, -}; - -#ifdef CONFIG_DRM_EXYNOS_FIMD -static struct exynos_drm_fimd_pdata drm_fimd_pdata = { - .panel = { - .timing = { - .left_margin = 8, - .right_margin = 8, - .upper_margin = 6, - .lower_margin = 6, - .hsync_len = 6, - .vsync_len = 4, - .xres = 480, - .yres = 800, - }, - }, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .default_win = 0, - .bpp = 32, -}; -#else -static struct s3c_fb_pd_win smdk4x12_fb_win0 = { - .xres = 480, - .yres = 800, - .virtual_x = 480, - .virtual_y = 800 * 2, - .max_bpp = 32, - .default_bpp = 24, -}; - -static struct fb_videomode smdk4x12_lcd_timing = { - .left_margin = 8, - .right_margin = 8, - .upper_margin = 6, - .lower_margin = 6, - .hsync_len = 6, - .vsync_len = 4, - .xres = 480, - .yres = 800, -}; - -static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = { - .win[0] = &smdk4x12_fb_win0, - .vtiming = &smdk4x12_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; -#endif - -/* USB OTG */ -static struct s3c_hsotg_plat smdk4x12_hsotg_pdata; - -static struct platform_device *smdk4x12_devices[] __initdata = { - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c0, - &s3c_device_i2c1, - &s3c_device_i2c3, - &s3c_device_i2c7, - &s3c_device_rtc, - &s3c_device_usb_hsotg, - &s3c_device_wdt, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc3, - &s5p_device_fimc_md, - &s5p_device_fimd0, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &samsung_device_keypad, -}; - -static void __init smdk4x12_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); -} - -static void __init smdk4x12_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init smdk4x12_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - i2c_register_board_info(0, smdk4x12_i2c_devs0, - ARRAY_SIZE(smdk4x12_i2c_devs0)); - - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, smdk4x12_i2c_devs1, - ARRAY_SIZE(smdk4x12_i2c_devs1)); - - s3c_i2c3_set_platdata(NULL); - i2c_register_board_info(3, smdk4x12_i2c_devs3, - ARRAY_SIZE(smdk4x12_i2c_devs3)); - - s3c_i2c7_set_platdata(NULL); - i2c_register_board_info(7, smdk4x12_i2c_devs7, - ARRAY_SIZE(smdk4x12_i2c_devs7)); - - samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data); - pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup)); - - samsung_keypad_set_platdata(&smdk4x12_keypad_data); - - s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata); - - s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata); - -#ifdef CONFIG_DRM_EXYNOS_FIMD - s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; - exynos4_fimd0_gpio_setup_24bpp(); -#else - s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata); -#endif - - platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices)); -} - -MACHINE_START(SMDK4212, "SMDK4212") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = smdk4x12_map_io, - .init_machine = smdk4x12_machine_init, - .init_time = exynos_init_time, - .restart = exynos4_restart, - .reserve = &smdk4x12_reserve, -MACHINE_END - -MACHINE_START(SMDK4412, "SMDK4412") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = smdk4x12_map_io, - .init_machine = smdk4x12_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .restart = exynos4_restart, - .reserve = &smdk4x12_reserve, -MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c deleted file mode 100644 index d95b8cf8525..00000000000 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ /dev/null @@ -1,444 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-smdkv310.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/serial_core.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/lcd.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/smsc911x.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/input.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/s3c-hsotg.h> -#include <linux/platform_data/usb-ehci-s5p.h> -#include <linux/platform_data/usb-ohci-exynos.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> -#include <plat/regs-serial.h> -#include <plat/regs-srom.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/fb.h> -#include <plat/keypad.h> -#include <plat/sdhci.h> -#include <plat/gpio-cfg.h> -#include <plat/backlight.h> -#include <plat/mfc.h> -#include <plat/clock.h> -#include <plat/hdmi.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <drm/exynos_drm.h> -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, -}; - -static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0"); - gpio_free(EXYNOS4_GPD0(1)); -#endif - /* fire nRESET on power up */ - gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0"); - mdelay(100); - - gpio_set_value(EXYNOS4_GPX0(6), 0); - mdelay(10); - - gpio_set_value(EXYNOS4_GPX0(6), 1); - mdelay(10); - - gpio_free(EXYNOS4_GPX0(6)); - } else { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0"); - gpio_free(EXYNOS4_GPD0(1)); -#endif - } -} - -static struct plat_lcd_data smdkv310_lcd_lte480wv_data = { - .set_power = lcd_lte480wv_set_power, -}; - -static struct platform_device smdkv310_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s5p_device_fimd0.dev, - .dev.platform_data = &smdkv310_lcd_lte480wv_data, -}; - -#ifdef CONFIG_DRM_EXYNOS_FIMD -static struct exynos_drm_fimd_pdata drm_fimd_pdata = { - .panel = { - .timing = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - }, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .default_win = 0, - .bpp = 32, -}; -#else -static struct s3c_fb_pd_win smdkv310_fb_win0 = { - .max_bpp = 32, - .default_bpp = 24, - .xres = 800, - .yres = 480, -}; - -static struct fb_videomode smdkv310_lcd_timing = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, -}; - -static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = { - .win[0] = &smdkv310_fb_win0, - .vtiming = &smdkv310_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; -#endif - -static struct resource smdkv310_smsc911x_resources[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K), - [1] = DEFINE_RES_NAMED(IRQ_EINT(5), 1, NULL, IORESOURCE_IRQ \ - | IRQF_TRIGGER_LOW), -}; - -static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, - .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, -}; - -static struct platform_device smdkv310_smsc911x = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources), - .resource = smdkv310_smsc911x_resources, - .dev = { - .platform_data = &smsc9215_config, - }, -}; - -static uint32_t smdkv310_keymap[] __initdata = { - /* KEY(row, col, keycode) */ - KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), - KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), - KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), - KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) -}; - -static struct matrix_keymap_data smdkv310_keymap_data __initdata = { - .keymap = smdkv310_keymap, - .keymap_size = ARRAY_SIZE(smdkv310_keymap), -}; - -static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = { - .keymap_data = &smdkv310_keymap_data, - .rows = 2, - .cols = 8, -}; - -static struct i2c_board_info i2c_devs1[] __initdata = { - {I2C_BOARD_INFO("wm8994", 0x1a),}, -}; - -/* USB EHCI */ -static struct s5p_ehci_platdata smdkv310_ehci_pdata; - -static void __init smdkv310_ehci_init(void) -{ - struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata; - - s5p_ehci_set_platdata(pdata); -} - -/* USB OHCI */ -static struct exynos4_ohci_platdata smdkv310_ohci_pdata; - -static void __init smdkv310_ohci_init(void) -{ - struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata; - - exynos4_ohci_set_platdata(pdata); -} - -/* USB OTG */ -static struct s3c_hsotg_plat smdkv310_hsotg_pdata; - -/* Audio device */ -static struct platform_device smdkv310_device_audio = { - .name = "smdk-audio", - .id = -1, -}; - -static struct platform_device *smdkv310_devices[] __initdata = { - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c1, - &s5p_device_i2c_hdmiphy, - &s3c_device_rtc, - &s3c_device_usb_hsotg, - &s3c_device_wdt, - &s5p_device_ehci, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc3, - &s5p_device_fimc_md, - &s5p_device_g2d, - &s5p_device_jpeg, - &exynos4_device_ac97, - &exynos4_device_i2s0, - &exynos4_device_ohci, - &samsung_device_keypad, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &exynos4_device_spdif, - &samsung_asoc_idma, - &s5p_device_fimd0, - &smdkv310_device_audio, - &smdkv310_lcd_lte480wv, - &smdkv310_smsc911x, - &exynos4_device_ahci, - &s5p_device_hdmi, - &s5p_device_mixer, -}; - -static void __init smdkv310_smsc911x_init(void) -{ - u32 cs1; - - /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5P_SROM_BW) & - ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << - S5P_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5P_SROM_BW); - - /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | - (0x9 << S5P_SROM_BCX__TACP__SHIFT) | - (0xc << S5P_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5P_SROM_BCX__TACC__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); -} - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = { - .no = EXYNOS4_GPD0(1), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdkv310_bl_data = { - .pwm_id = 1, - .pwm_period_ns = 1000, -}; - -/* I2C module and id for HDMIPHY */ -static struct i2c_board_info hdmiphy_info = { - I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), -}; - -static struct pwm_lookup smdkv310_pwm_lookup[] = { - PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL), -}; - -static void s5p_tv_setup(void) -{ - /* direct HPD to HDMI chip */ - WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug")); - s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); - s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); -} - -static void __init smdkv310_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); - xxti_f = 12000000; - xusbxti_f = 24000000; -} - -static void __init smdkv310_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init smdkv310_machine_init(void) -{ - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); - - smdkv310_smsc911x_init(); - - s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata); - - s5p_tv_setup(); - s5p_i2c_hdmiphy_set_platdata(NULL); - s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); - - samsung_keypad_set_platdata(&smdkv310_keypad_data); - - samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); - pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup)); - -#ifdef CONFIG_DRM_EXYNOS_FIMD - s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; - exynos4_fimd0_gpio_setup_24bpp(); -#else - s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata); -#endif - - smdkv310_ehci_init(); - smdkv310_ohci_init(); - s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata); - - platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); -} - -MACHINE_START(SMDKV310, "SMDKV310") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = smdkv310_map_io, - .init_machine = smdkv310_machine_init, - .init_time = exynos_init_time, - .reserve = &smdkv310_reserve, - .restart = exynos4_restart, -MACHINE_END - -MACHINE_START(SMDKC210, "SMDKC210") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = smdkv310_map_io, - .init_machine = smdkv310_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .reserve = &smdkv310_reserve, - .restart = exynos4_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c deleted file mode 100644 index 74ddb2b5561..00000000000 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ /dev/null @@ -1,1159 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-universal_c210.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/fb.h> -#include <linux/mfd/max8998.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/max8952.h> -#include <linux/mmc/host.h> -#include <linux/i2c-gpio.h> -#include <linux/i2c/mcs.h> -#include <linux/i2c/atmel_mxt_ts.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/mipi-csis.h> -#include <linux/platform_data/s3c-hsotg.h> -#include <drm/exynos_drm.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/samsung_fimd.h> -#include <plat/regs-serial.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/gpio-cfg.h> -#include <plat/fb.h> -#include <plat/mfc.h> -#include <plat/sdhci.h> -#include <plat/fimc-core.h> -#include <plat/camport.h> - -#include <mach/map.h> - -#include <media/v4l2-mediabus.h> -#include <media/s5p_fimc.h> -#include <media/m5mols.h> -#include <media/s5k6aa.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG256 | \ - S5PV210_UFCON_RXTRIG256) - -static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, -}; - -static struct regulator_consumer_supply max8952_consumer = - REGULATOR_SUPPLY("vdd_arm", NULL); - -static struct regulator_init_data universal_max8952_reg_data = { - .constraints = { - .name = "VARM_1.2V", - .min_uV = 770000, - .max_uV = 1400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8952_consumer, -}; - -static struct max8952_platform_data universal_max8952_pdata __initdata = { - .gpio_vid0 = EXYNOS4_GPX0(3), - .gpio_vid1 = EXYNOS4_GPX0(4), - .gpio_en = -1, /* Not controllable, set "Always High" */ - .default_mode = 0, /* vid0 = 0, vid1 = 0 */ - .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */ - .sync_freq = 0, /* default: fastest */ - .ramp_speed = 0, /* default: fastest */ - .reg_data = &universal_max8952_reg_data, -}; - -static struct regulator_consumer_supply lp3974_buck1_consumer = - REGULATOR_SUPPLY("vdd_int", NULL); - -static struct regulator_consumer_supply lp3974_buck2_consumer = - REGULATOR_SUPPLY("vddg3d", NULL); - -static struct regulator_consumer_supply lp3974_buck3_consumer[] = { - REGULATOR_SUPPLY("vdet", "s5p-sdo"), - REGULATOR_SUPPLY("vdd_reg", "0-003c"), -}; - -static struct regulator_init_data lp3974_buck1_data = { - .constraints = { - .name = "VINT_1.1V", - .min_uV = 750000, - .max_uV = 1500000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_buck1_consumer, -}; - -static struct regulator_init_data lp3974_buck2_data = { - .constraints = { - .name = "VG3D_1.1V", - .min_uV = 750000, - .max_uV = 1500000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_buck2_consumer, -}; - -static struct regulator_init_data lp3974_buck3_data = { - .constraints = { - .name = "VCC_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer), - .consumer_supplies = lp3974_buck3_consumer, -}; - -static struct regulator_init_data lp3974_buck4_data = { - .constraints = { - .name = "VMEM_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_ldo2_data = { - .constraints = { - .name = "VALIVE_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_consumer_supply lp3974_ldo3_consumer[] = { - REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), - REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), - REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), - REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), -}; - -static struct regulator_init_data lp3974_ldo3_data = { - .constraints = { - .name = "VUSB+MIPI_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer), - .consumer_supplies = lp3974_ldo3_consumer, -}; - -static struct regulator_consumer_supply lp3974_ldo4_consumer[] = { - REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), -}; - -static struct regulator_init_data lp3974_ldo4_data = { - .constraints = { - .name = "VADC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer), - .consumer_supplies = lp3974_ldo4_consumer, -}; - -static struct regulator_init_data lp3974_ldo5_data = { - .constraints = { - .name = "VTF_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_ldo6_data = { - .constraints = { - .name = "LDO6", - .min_uV = 2000000, - .max_uV = 2000000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_consumer_supply lp3974_ldo7_consumer[] = { - REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), -}; - -static struct regulator_init_data lp3974_ldo7_data = { - .constraints = { - .name = "VLCD+VMIPI_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer), - .consumer_supplies = lp3974_ldo7_consumer, -}; - -static struct regulator_consumer_supply lp3974_ldo8_consumer[] = { - REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), - REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), -}; - -static struct regulator_init_data lp3974_ldo8_data = { - .constraints = { - .name = "VUSB+VDAC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer), - .consumer_supplies = lp3974_ldo8_consumer, -}; - -static struct regulator_consumer_supply lp3974_ldo9_consumer = - REGULATOR_SUPPLY("vddio", "0-003c"); - -static struct regulator_init_data lp3974_ldo9_data = { - .constraints = { - .name = "VCC_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_ldo9_consumer, -}; - -static struct regulator_init_data lp3974_ldo10_data = { - .constraints = { - .name = "VPLL_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .boot_on = 1, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_consumer_supply lp3974_ldo11_consumer = - REGULATOR_SUPPLY("dig_28", "0-001f"); - -static struct regulator_init_data lp3974_ldo11_data = { - .constraints = { - .name = "CAM_AF_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_ldo11_consumer, -}; - -static struct regulator_init_data lp3974_ldo12_data = { - .constraints = { - .name = "PS_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_ldo13_data = { - .constraints = { - .name = "VHIC_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_consumer_supply lp3974_ldo14_consumer = - REGULATOR_SUPPLY("dig_18", "0-001f"); - -static struct regulator_init_data lp3974_ldo14_data = { - .constraints = { - .name = "CAM_I_HOST_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_ldo14_consumer, -}; - - -static struct regulator_consumer_supply lp3974_ldo15_consumer = - REGULATOR_SUPPLY("dig_12", "0-001f"); - -static struct regulator_init_data lp3974_ldo15_data = { - .constraints = { - .name = "CAM_S_DIG+FM33_CORE_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_ldo15_consumer, -}; - -static struct regulator_consumer_supply lp3974_ldo16_consumer[] = { - REGULATOR_SUPPLY("vdda", "0-003c"), - REGULATOR_SUPPLY("a_sensor", "0-001f"), -}; - -static struct regulator_init_data lp3974_ldo16_data = { - .constraints = { - .name = "CAM_S_ANA_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer), - .consumer_supplies = lp3974_ldo16_consumer, -}; - -static struct regulator_init_data lp3974_ldo17_data = { - .constraints = { - .name = "VCC_3.0V_LCD", - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_32khz_ap_data = { - .constraints = { - .name = "32KHz AP", - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_32khz_cp_data = { - .constraints = { - .name = "32KHz CP", - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_vichg_data = { - .constraints = { - .name = "VICHG", - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_esafeout1_data = { - .constraints = { - .name = "SAFEOUT1", - .min_uV = 4800000, - .max_uV = 4800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_esafeout2_data = { - .constraints = { - .name = "SAFEOUT2", - .boot_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct max8998_regulator_data lp3974_regulators[] = { - { MAX8998_LDO2, &lp3974_ldo2_data }, - { MAX8998_LDO3, &lp3974_ldo3_data }, - { MAX8998_LDO4, &lp3974_ldo4_data }, - { MAX8998_LDO5, &lp3974_ldo5_data }, - { MAX8998_LDO6, &lp3974_ldo6_data }, - { MAX8998_LDO7, &lp3974_ldo7_data }, - { MAX8998_LDO8, &lp3974_ldo8_data }, - { MAX8998_LDO9, &lp3974_ldo9_data }, - { MAX8998_LDO10, &lp3974_ldo10_data }, - { MAX8998_LDO11, &lp3974_ldo11_data }, - { MAX8998_LDO12, &lp3974_ldo12_data }, - { MAX8998_LDO13, &lp3974_ldo13_data }, - { MAX8998_LDO14, &lp3974_ldo14_data }, - { MAX8998_LDO15, &lp3974_ldo15_data }, - { MAX8998_LDO16, &lp3974_ldo16_data }, - { MAX8998_LDO17, &lp3974_ldo17_data }, - { MAX8998_BUCK1, &lp3974_buck1_data }, - { MAX8998_BUCK2, &lp3974_buck2_data }, - { MAX8998_BUCK3, &lp3974_buck3_data }, - { MAX8998_BUCK4, &lp3974_buck4_data }, - { MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data }, - { MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data }, - { MAX8998_ENVICHG, &lp3974_vichg_data }, - { MAX8998_ESAFEOUT1, &lp3974_esafeout1_data }, - { MAX8998_ESAFEOUT2, &lp3974_esafeout2_data }, -}; - -static struct max8998_platform_data universal_lp3974_pdata = { - .num_regulators = ARRAY_SIZE(lp3974_regulators), - .regulators = lp3974_regulators, - .buck1_voltage1 = 1100000, /* INT */ - .buck1_voltage2 = 1000000, - .buck1_voltage3 = 1100000, - .buck1_voltage4 = 1000000, - .buck1_set1 = EXYNOS4_GPX0(5), - .buck1_set2 = EXYNOS4_GPX0(6), - .buck2_voltage1 = 1200000, /* G3D */ - .buck2_voltage2 = 1100000, - .buck1_default_idx = 0, - .buck2_set3 = EXYNOS4_GPE2(0), - .buck2_default_idx = 0, - .wakeup = true, -}; - - -enum fixed_regulator_id { - FIXED_REG_ID_MMC0, - FIXED_REG_ID_HDMI_5V, - FIXED_REG_ID_CAM_S_IF, - FIXED_REG_ID_CAM_I_CORE, - FIXED_REG_ID_CAM_VT_DIO, -}; - -static struct regulator_consumer_supply hdmi_fixed_consumer = - REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi"); - -static struct regulator_init_data hdmi_fixed_voltage_init_data = { - .constraints = { - .name = "HDMI_5V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &hdmi_fixed_consumer, -}; - -static struct fixed_voltage_config hdmi_fixed_voltage_config = { - .supply_name = "HDMI_EN1", - .microvolts = 5000000, - .gpio = EXYNOS4_GPE0(1), - .enable_high = true, - .init_data = &hdmi_fixed_voltage_init_data, -}; - -static struct platform_device hdmi_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = FIXED_REG_ID_HDMI_5V, - .dev = { - .platform_data = &hdmi_fixed_voltage_config, - }, -}; - -/* GPIO I2C 5 (PMIC) */ -static struct i2c_board_info i2c5_devs[] __initdata = { - { - I2C_BOARD_INFO("max8952", 0xC0 >> 1), - .platform_data = &universal_max8952_pdata, - }, { - I2C_BOARD_INFO("lp3974", 0xCC >> 1), - .platform_data = &universal_lp3974_pdata, - }, -}; - -/* I2C3 (TSP) */ -static struct mxt_platform_data qt602240_platform_data = { - .x_line = 19, - .y_line = 11, - .x_size = 800, - .y_size = 480, - .blen = 0x11, - .threshold = 0x28, - .voltage = 2800000, /* 2.8V */ - .orient = MXT_DIAGONAL, - .irqflags = IRQF_TRIGGER_FALLING, -}; - -static struct i2c_board_info i2c3_devs[] __initdata = { - { - I2C_BOARD_INFO("qt602240_ts", 0x4a), - .platform_data = &qt602240_platform_data, - }, -}; - -static void __init universal_tsp_init(void) -{ - int gpio; - - /* TSP_LDO_ON: XMDMADDR_11 */ - gpio = EXYNOS4_GPE2(3); - gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON"); - gpio_export(gpio, 0); - - /* TSP_INT: XMDMADDR_7 */ - gpio = EXYNOS4_GPE1(7); - gpio_request(gpio, "TSP_INT"); - - s5p_register_gpio_interrupt(gpio); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - i2c3_devs[0].irq = gpio_to_irq(gpio); -} - - -/* GPIO I2C 12 (3 Touchkey) */ -static uint32_t touchkey_keymap[] = { - /* MCS_KEY_MAP(value, keycode) */ - MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */ - MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */ -}; - -static struct mcs_platform_data touchkey_data = { - .keymap = touchkey_keymap, - .keymap_size = ARRAY_SIZE(touchkey_keymap), - .key_maxval = 2, -}; - -/* GPIO I2C 3_TOUCH 2.8V */ -#define I2C_GPIO_BUS_12 12 -static struct i2c_gpio_platform_data i2c_gpio12_data = { - .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */ - .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */ -}; - -static struct platform_device i2c_gpio12 = { - .name = "i2c-gpio", - .id = I2C_GPIO_BUS_12, - .dev = { - .platform_data = &i2c_gpio12_data, - }, -}; - -static struct i2c_board_info i2c_gpio12_devs[] __initdata = { - { - I2C_BOARD_INFO("mcs5080_touchkey", 0x20), - .platform_data = &touchkey_data, - }, -}; - -static void __init universal_touchkey_init(void) -{ - int gpio; - - gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */ - gpio_request(gpio, "3_TOUCH_INT"); - s5p_register_gpio_interrupt(gpio); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - i2c_gpio12_devs[0].irq = gpio_to_irq(gpio); - - gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */ - gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN"); -} - -static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = { - .frequency = 300 * 1000, - .sda_delay = 200, -}; - -/* GPIO KEYS */ -static struct gpio_keys_button universal_gpio_keys_tables[] = { - { - .code = KEY_VOLUMEUP, - .gpio = EXYNOS4_GPX2(0), /* XEINT16 */ - .desc = "gpio-keys: KEY_VOLUMEUP", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_VOLUMEDOWN, - .gpio = EXYNOS4_GPX2(1), /* XEINT17 */ - .desc = "gpio-keys: KEY_VOLUMEDOWN", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_CONFIG, - .gpio = EXYNOS4_GPX2(2), /* XEINT18 */ - .desc = "gpio-keys: KEY_CONFIG", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_CAMERA, - .gpio = EXYNOS4_GPX2(3), /* XEINT19 */ - .desc = "gpio-keys: KEY_CAMERA", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_OK, - .gpio = EXYNOS4_GPX3(5), /* XEINT29 */ - .desc = "gpio-keys: KEY_OK", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data universal_gpio_keys_data = { - .buttons = universal_gpio_keys_tables, - .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables), -}; - -static struct platform_device universal_gpio_keys = { - .name = "gpio-keys", - .dev = { - .platform_data = &universal_gpio_keys_data, - }, -}; - -/* eMMC */ -static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { - .max_width = 8, - .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .cd_type = S3C_SDHCI_CD_PERMANENT, -}; - -static struct regulator_consumer_supply mmc0_supplies[] = { - REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"), -}; - -static struct regulator_init_data mmc0_fixed_voltage_init_data = { - .constraints = { - .name = "VMEM_VDD_2.8V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies), - .consumer_supplies = mmc0_supplies, -}; - -static struct fixed_voltage_config mmc0_fixed_voltage_config = { - .supply_name = "MASSMEMORY_EN", - .microvolts = 2800000, - .gpio = EXYNOS4_GPE1(3), - .enable_high = true, - .init_data = &mmc0_fixed_voltage_init_data, -}; - -static struct platform_device mmc0_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = FIXED_REG_ID_MMC0, - .dev = { - .platform_data = &mmc0_fixed_voltage_config, - }, -}; - -/* SD */ -static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ - .ext_cd_gpio_invert = 1, - .cd_type = S3C_SDHCI_CD_GPIO, -}; - -/* WiFi */ -static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .cd_type = S3C_SDHCI_CD_EXTERNAL, -}; - -static void __init universal_sdhci_init(void) -{ - s3c_sdhci0_set_platdata(&universal_hsmmc0_data); - s3c_sdhci2_set_platdata(&universal_hsmmc2_data); - s3c_sdhci3_set_platdata(&universal_hsmmc3_data); -} - -/* I2C1 */ -static struct i2c_board_info i2c1_devs[] __initdata = { - /* Gyro, To be updated */ -}; - -#ifdef CONFIG_DRM_EXYNOS -static struct exynos_drm_fimd_pdata drm_fimd_pdata = { - .panel = { - .timing = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 2, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 1, - .xres = 480, - .yres = 800, - .refresh = 55, - }, - }, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | - VIDCON0_CLKSEL_LCD, - .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN - | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .default_win = 3, - .bpp = 32, -}; -#else -/* Frame Buffer */ -static struct s3c_fb_pd_win universal_fb_win0 = { - .max_bpp = 32, - .default_bpp = 16, - .xres = 480, - .yres = 800, - .virtual_x = 480, - .virtual_y = 2 * 800, -}; - -static struct fb_videomode universal_lcd_timing = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 2, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 1, - .xres = 480, - .yres = 800, - .refresh = 55, -}; - -static struct s3c_fb_platdata universal_lcd_pdata __initdata = { - .win[0] = &universal_fb_win0, - .vtiming = &universal_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | - VIDCON0_CLKSEL_LCD, - .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN - | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; -#endif - -static struct regulator_consumer_supply cam_vt_dio_supply = - REGULATOR_SUPPLY("vdd_core", "0-003c"); - -static struct regulator_init_data cam_vt_dio_reg_init_data = { - .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, - .num_consumer_supplies = 1, - .consumer_supplies = &cam_vt_dio_supply, -}; - -static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = { - .supply_name = "CAM_VT_D_IO", - .microvolts = 2800000, - .gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */ - .enable_high = 1, - .init_data = &cam_vt_dio_reg_init_data, -}; - -static struct platform_device cam_vt_dio_fixed_reg_dev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO, - .dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg }, -}; - -static struct regulator_consumer_supply cam_i_core_supply = - REGULATOR_SUPPLY("core", "0-001f"); - -static struct regulator_init_data cam_i_core_reg_init_data = { - .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, - .num_consumer_supplies = 1, - .consumer_supplies = &cam_i_core_supply, -}; - -static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = { - .supply_name = "CAM_I_CORE_1.2V", - .microvolts = 1200000, - .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */ - .enable_high = 1, - .init_data = &cam_i_core_reg_init_data, -}; - -static struct platform_device cam_i_core_fixed_reg_dev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE, - .dev = { .platform_data = &cam_i_core_fixed_voltage_cfg }, -}; - -static struct regulator_consumer_supply cam_s_if_supply = - REGULATOR_SUPPLY("d_sensor", "0-001f"); - -static struct regulator_init_data cam_s_if_reg_init_data = { - .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, - .num_consumer_supplies = 1, - .consumer_supplies = &cam_s_if_supply, -}; - -static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = { - .supply_name = "CAM_S_IF_1.8V", - .microvolts = 1800000, - .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */ - .enable_high = 1, - .init_data = &cam_s_if_reg_init_data, -}; - -static struct platform_device cam_s_if_fixed_reg_dev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF, - .dev = { .platform_data = &cam_s_if_fixed_voltage_cfg }, -}; - -static struct s5p_platform_mipi_csis mipi_csis_platdata = { - .clk_rate = 166000000UL, - .lanes = 2, - .hs_settle = 12, -}; - -#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3) -#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */ -#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5) -#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7) -#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6) - -static int s5k6aa_set_power(int on) -{ - gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on); - return 0; -} - -static struct s5k6aa_platform_data s5k6aa_platdata = { - .mclk_frequency = 21600000UL, - .gpio_reset = { GPIO_CAM_VGA_NRST, 0 }, - .gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 }, - .bus_type = V4L2_MBUS_PARALLEL, - .horiz_flip = 1, - .set_power = s5k6aa_set_power, -}; - -static struct i2c_board_info s5k6aa_board_info = { - I2C_BOARD_INFO("S5K6AA", 0x3C), - .platform_data = &s5k6aa_platdata, -}; - -static int m5mols_set_power(struct device *dev, int on) -{ - gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on); - gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on); - return 0; -} - -static struct m5mols_platform_data m5mols_platdata = { - .gpio_reset = GPIO_CAM_MEGA_nRST, - .reset_polarity = 0, - .set_power = m5mols_set_power, -}; - -static struct i2c_board_info m5mols_board_info = { - I2C_BOARD_INFO("M5MOLS", 0x1F), - .platform_data = &m5mols_platdata, -}; - -static struct fimc_source_info universal_camera_sensors[] = { - { - .mux_id = 0, - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, - .board_info = &s5k6aa_board_info, - .i2c_bus_num = 0, - .clk_frequency = 24000000UL, - }, { - .mux_id = 0, - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2, - .board_info = &m5mols_board_info, - .i2c_bus_num = 0, - .clk_frequency = 24000000UL, - }, -}; - -static struct s5p_platform_fimc fimc_md_platdata = { - .source_info = universal_camera_sensors, - .num_clients = ARRAY_SIZE(universal_camera_sensors), -}; - -static struct gpio universal_camera_gpios[] = { - { GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" }, - { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" }, - { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, - { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, - { GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, - { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, -}; - -/* USB OTG */ -static struct s3c_hsotg_plat universal_hsotg_pdata; - -static void __init universal_camera_init(void) -{ - s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), - &s5p_device_mipi_csis0); - s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata), - &s5p_device_fimc_md); - - if (gpio_request_array(universal_camera_gpios, - ARRAY_SIZE(universal_camera_gpios))) { - pr_err("%s: GPIO request failed\n", __func__); - return; - } - - if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf))) - m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT); - else - pr_err("Failed to configure 8M_ISP_INT GPIO\n"); - - /* Free GPIOs controlled directly by the sensor drivers. */ - gpio_free(GPIO_CAM_MEGA_nRST); - gpio_free(GPIO_CAM_8M_ISP_INT); - gpio_free(GPIO_CAM_VGA_NRST); - gpio_free(GPIO_CAM_VGA_NSTBY); - - if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) - pr_err("Camera port A setup failed\n"); -} - -static struct platform_device *universal_devices[] __initdata = { - /* Samsung Platform Devices */ - &s5p_device_mipi_csis0, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc3, - &s5p_device_g2d, - &mmc0_fixed_voltage, - &s3c_device_hsmmc0, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c0, - &s3c_device_i2c3, - &s3c_device_i2c5, - &s5p_device_i2c_hdmiphy, - &hdmi_fixed_voltage, - &s5p_device_hdmi, - &s5p_device_sdo, - &s5p_device_mixer, - - /* Universal Devices */ - &i2c_gpio12, - &universal_gpio_keys, - &s5p_device_onenand, - &s5p_device_fimd0, - &s5p_device_jpeg, - &s3c_device_usb_hsotg, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &cam_vt_dio_fixed_reg_dev, - &cam_i_core_fixed_reg_dev, - &cam_s_if_fixed_reg_dev, - &s5p_device_fimc_md, -}; - -static void __init universal_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - exynos_set_timer_source(BIT(2) | BIT(4)); - xxti_f = 0; - xusbxti_f = 24000000; -} - -static void s5p_tv_setup(void) -{ - /* direct HPD to HDMI chip */ - gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); - s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); - s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); -} - -static void __init universal_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init universal_machine_init(void) -{ - universal_sdhci_init(); - s5p_tv_setup(); - - s3c_i2c0_set_platdata(&universal_i2c0_platdata); - i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); - - universal_tsp_init(); - s3c_i2c3_set_platdata(NULL); - i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); - - s3c_i2c5_set_platdata(NULL); - s5p_i2c_hdmiphy_set_platdata(NULL); - i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); - -#ifdef CONFIG_DRM_EXYNOS - s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; - exynos4_fimd0_gpio_setup_24bpp(); -#else - s5p_fimd0_set_platdata(&universal_lcd_pdata); -#endif - - universal_touchkey_init(); - i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, - ARRAY_SIZE(i2c_gpio12_devs)); - - s3c_hsotg_set_platdata(&universal_hsotg_pdata); - universal_camera_init(); - - /* Last */ - platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); -} - -MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") - /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = universal_map_io, - .init_machine = universal_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .reserve = &universal_reserve, - .restart = exynos4_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index a0e8ff7758a..d9c6d0ab6a0 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -200,7 +200,7 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { int i; - if (!(soc_is_exynos5250() || soc_is_exynos5440())) + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); /* diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index e3faaa81201..41c20692a13 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -30,7 +30,6 @@ #include <plat/regs-srom.h> #include <mach/regs-irq.h> -#include <mach/regs-gpio.h> #include <mach/regs-clock.h> #include <mach/regs-pmu.h> #include <mach/pm-core.h> diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 9f1351de52f..1703593e366 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -74,17 +74,6 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain) return exynos_pd_power(domain, false); } -#define EXYNOS_GPD(PD, BASE, NAME) \ -static struct exynos_pm_domain PD = { \ - .base = (void __iomem *)BASE, \ - .name = NAME, \ - .pd = { \ - .power_off = exynos_pd_power_off, \ - .power_on = exynos_pd_power_on, \ - }, \ -} - -#ifdef CONFIG_OF static void exynos_add_device_to_domain(struct exynos_pm_domain *pd, struct device *dev) { @@ -157,7 +146,7 @@ static struct notifier_block platform_nb = { .notifier_call = exynos_pm_notifier_call, }; -static __init int exynos_pm_dt_parse_domains(void) +static __init int exynos4_pm_init_power_domain(void) { struct platform_device *pdev; struct device_node *np; @@ -193,94 +182,6 @@ static __init int exynos_pm_dt_parse_domains(void) return 0; } -#else -static __init int exynos_pm_dt_parse_domains(void) -{ - return 0; -} -#endif /* CONFIG_OF */ - -static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, - struct exynos_pm_domain *pd) -{ - if (pdev->dev.bus) { - if (!pm_genpd_add_device(&pd->pd, &pdev->dev)) - pm_genpd_dev_need_restore(&pdev->dev, true); - else - pr_info("%s: error in adding %s device to %s power" - "domain\n", __func__, dev_name(&pdev->dev), - pd->name); - } -} - -EXYNOS_GPD(exynos4_pd_mfc, S5P_PMU_MFC_CONF, "pd-mfc"); -EXYNOS_GPD(exynos4_pd_g3d, S5P_PMU_G3D_CONF, "pd-g3d"); -EXYNOS_GPD(exynos4_pd_lcd0, S5P_PMU_LCD0_CONF, "pd-lcd0"); -EXYNOS_GPD(exynos4_pd_lcd1, S5P_PMU_LCD1_CONF, "pd-lcd1"); -EXYNOS_GPD(exynos4_pd_tv, S5P_PMU_TV_CONF, "pd-tv"); -EXYNOS_GPD(exynos4_pd_cam, S5P_PMU_CAM_CONF, "pd-cam"); -EXYNOS_GPD(exynos4_pd_gps, S5P_PMU_GPS_CONF, "pd-gps"); - -static struct exynos_pm_domain *exynos4_pm_domains[] = { - &exynos4_pd_mfc, - &exynos4_pd_g3d, - &exynos4_pd_lcd0, - &exynos4_pd_lcd1, - &exynos4_pd_tv, - &exynos4_pd_cam, - &exynos4_pd_gps, -}; - -static __init int exynos4_pm_init_power_domain(void) -{ - int idx; - - if (of_have_populated_dt()) - return exynos_pm_dt_parse_domains(); - - for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) { - struct exynos_pm_domain *pd = exynos4_pm_domains[idx]; - int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; - - pm_genpd_init(&pd->pd, NULL, !on); - } - -#ifdef CONFIG_S5P_DEV_FIMD0 - exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0); -#endif -#ifdef CONFIG_S5P_DEV_TV - exynos_pm_add_dev_to_genpd(&s5p_device_hdmi, &exynos4_pd_tv); - exynos_pm_add_dev_to_genpd(&s5p_device_mixer, &exynos4_pd_tv); -#endif -#ifdef CONFIG_S5P_DEV_MFC - exynos_pm_add_dev_to_genpd(&s5p_device_mfc, &exynos4_pd_mfc); -#endif -#ifdef CONFIG_S5P_DEV_FIMC0 - exynos_pm_add_dev_to_genpd(&s5p_device_fimc0, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_FIMC1 - exynos_pm_add_dev_to_genpd(&s5p_device_fimc1, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_FIMC2 - exynos_pm_add_dev_to_genpd(&s5p_device_fimc2, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_FIMC3 - exynos_pm_add_dev_to_genpd(&s5p_device_fimc3, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_CSIS0 - exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis0, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_CSIS1 - exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_G2D - exynos_pm_add_dev_to_genpd(&s5p_device_g2d, &exynos4_pd_lcd0); -#endif -#ifdef CONFIG_S5P_DEV_JPEG - exynos_pm_add_dev_to_genpd(&s5p_device_jpeg, &exynos4_pd_cam); -#endif - return 0; -} arch_initcall(exynos4_pm_init_power_domain); int __init exynos_pm_late_initcall(void) diff --git a/arch/arm/mach-exynos/setup-fimc.c b/arch/arm/mach-exynos/setup-fimc.c deleted file mode 100644 index 6a45078d9d1..00000000000 --- a/arch/arm/mach-exynos/setup-fimc.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * - * Exynos4 camera interface GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> -#include <plat/camport.h> - -int exynos4_fimc_setup_gpio(enum s5p_camport_id id) -{ - u32 gpio8, gpio5; - u32 sfn; - int ret; - - switch (id) { - case S5P_CAMPORT_A: - gpio8 = EXYNOS4_GPJ0(0); /* PCLK, VSYNC, HREF, DATA[0:4] */ - gpio5 = EXYNOS4_GPJ1(0); /* DATA[5:7], CLKOUT, FIELD */ - sfn = S3C_GPIO_SFN(2); - break; - - case S5P_CAMPORT_B: - gpio8 = EXYNOS4_GPE0(0); /* DATA[0:7] */ - gpio5 = EXYNOS4_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD */ - sfn = S3C_GPIO_SFN(3); - break; - - default: - WARN(1, "Wrong camport id: %d\n", id); - return -EINVAL; - } - - ret = s3c_gpio_cfgall_range(gpio8, 8, sfn, S3C_GPIO_PULL_UP); - if (ret) - return ret; - - return s3c_gpio_cfgall_range(gpio5, 5, sfn, S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-fimd0.c b/arch/arm/mach-exynos/setup-fimd0.c deleted file mode 100644 index 5665bb4e980..00000000000 --- a/arch/arm/mach-exynos/setup-fimd0.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/mach-exynos4/setup-fimd0.c - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Base Exynos4 FIMD 0 configuration - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/fb.h> -#include <linux/gpio.h> - -#include <video/samsung_fimd.h> -#include <plat/gpio-cfg.h> - -#include <mach/map.h> - -void exynos4_fimd0_gpio_setup_24bpp(void) -{ - unsigned int reg; - - s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2)); - - /* - * Set DISPLAY_CONTROL register for Display path selection. - * - * DISPLAY_CONTROL[1:0] - * --------------------- - * 00 | MIE - * 01 | MDINE - * 10 | FIMD : selected - * 11 | FIMD - */ - reg = __raw_readl(S3C_VA_SYS + 0x0210); - reg |= (1 << 1); - __raw_writel(reg, S3C_VA_SYS + 0x0210); -} diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c deleted file mode 100644 index e2d9dfbf102..00000000000 --- a/arch/arm/mach-exynos/setup-i2c0.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> -#include <plat/cpu.h> - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - if (soc_is_exynos5250() || soc_is_exynos5440()) - /* will be implemented with gpio function */ - return; - - s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c1.c b/arch/arm/mach-exynos/setup-i2c1.c deleted file mode 100644 index 8d2279cc85d..00000000000 --- a/arch/arm/mach-exynos/setup-i2c1.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c1.c - * - * Copyright (C) 2010 Samsung Electronics Co., Ltd. - * - * I2C1 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c1_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPD1(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c2.c b/arch/arm/mach-exynos/setup-i2c2.c deleted file mode 100644 index 0ed62fc42a7..00000000000 --- a/arch/arm/mach-exynos/setup-i2c2.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c2.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * - * I2C2 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c2_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPA0(6), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c3.c b/arch/arm/mach-exynos/setup-i2c3.c deleted file mode 100644 index 7787fd26076..00000000000 --- a/arch/arm/mach-exynos/setup-i2c3.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c3.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C3 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c3_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPA1(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c4.c b/arch/arm/mach-exynos/setup-i2c4.c deleted file mode 100644 index edc847f8982..00000000000 --- a/arch/arm/mach-exynos/setup-i2c4.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c4.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C4 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c4_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c5.c b/arch/arm/mach-exynos/setup-i2c5.c deleted file mode 100644 index d88af7f7595..00000000000 --- a/arch/arm/mach-exynos/setup-i2c5.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c5.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C5 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c5_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c6.c b/arch/arm/mach-exynos/setup-i2c6.c deleted file mode 100644 index c590286c9d3..00000000000 --- a/arch/arm/mach-exynos/setup-i2c6.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c6.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C6 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c6_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2, - S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c7.c b/arch/arm/mach-exynos/setup-i2c7.c deleted file mode 100644 index 1bba75568a5..00000000000 --- a/arch/arm/mach-exynos/setup-i2c7.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c7.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C7 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c7_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPD0(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-keypad.c b/arch/arm/mach-exynos/setup-keypad.c deleted file mode 100644 index 7862bfb5933..00000000000 --- a/arch/arm/mach-exynos/setup-keypad.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/mach-exynos4/setup-keypad.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * GPIO configuration for Exynos4 KeyPad device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) -{ - /* Keypads can be of various combinations, Just making sure */ - - if (rows > 8) { - /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), - S3C_GPIO_PULL_UP); - - /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); - } else { - /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), - S3C_GPIO_PULL_UP); - } - - /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(0), cols, S3C_GPIO_SFN(3)); -} diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c deleted file mode 100644 index d5b98c86673..00000000000 --- a/arch/arm/mach-exynos/setup-sdhci-gpio.c +++ /dev/null @@ -1,152 +0,0 @@ -/* linux/arch/arm/mach-exynos4/setup-sdhci-gpio.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/card.h> - -#include <mach/gpio.h> -#include <plat/gpio-cfg.h> -#include <plat/sdhci.h> - -void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK0[0:1] pins to special-function 2 */ - for (gpio = EXYNOS4_GPK0(0); gpio < EXYNOS4_GPK0(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - switch (width) { - case 8: - for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-function 3 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - case 4: - for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { - /* Data pin GPK0[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - default: - break; - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(EXYNOS4_GPK0(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPK0(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} - -void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK1[0:1] pins to special-function 2 */ - for (gpio = EXYNOS4_GPK1(0); gpio < EXYNOS4_GPK1(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(EXYNOS4_GPK1(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPK1(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} - -void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK2[0:1] pins to special-function 2 */ - for (gpio = EXYNOS4_GPK2(0); gpio < EXYNOS4_GPK2(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - switch (width) { - case 8: - for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { - /* Data pin GPK3[3:6] to special-function 3 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - case 4: - for (gpio = EXYNOS4_GPK2(3); gpio <= EXYNOS4_GPK2(6); gpio++) { - /* Data pin GPK2[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - default: - break; - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(EXYNOS4_GPK2(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPK2(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} - -void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK3[0:1] pins to special-function 2 */ - for (gpio = EXYNOS4_GPK3(0); gpio < EXYNOS4_GPK3(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { - /* Data pin GPK3[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(EXYNOS4_GPK3(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPK3(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c deleted file mode 100644 index 4999829d1c6..00000000000 --- a/arch/arm/mach-exynos/setup-spi.c +++ /dev/null @@ -1,45 +0,0 @@ -/* linux/arch/arm/mach-exynos4/setup-spi.c - * - * Copyright (C) 2011 Samsung Electronics Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -#ifdef CONFIG_S3C64XX_DEV_SPI0 -int s3c64xx_spi0_cfg_gpio(void) -{ - s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif - -#ifdef CONFIG_S3C64XX_DEV_SPI1 -int s3c64xx_spi1_cfg_gpio(void) -{ - s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif - -#ifdef CONFIG_S3C64XX_DEV_SPI2 -int s3c64xx_spi2_cfg_gpio(void) -{ - s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5)); - s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2, - S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP); - return 0; -} -#endif diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c deleted file mode 100644 index 6af40662a44..00000000000 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <mach/regs-pmu.h> -#include <mach/regs-usb-phy.h> -#include <plat/cpu.h> -#include <plat/usb-phy.h> - -static atomic_t host_usage; - -static int exynos4_usb_host_phy_is_on(void) -{ - return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1; -} - -static void exynos4210_usb_phy_clkset(struct platform_device *pdev) -{ - struct clk *xusbxti_clk; - u32 phyclk; - - xusbxti_clk = clk_get(&pdev->dev, "xusbxti"); - if (xusbxti_clk && !IS_ERR(xusbxti_clk)) { - if (soc_is_exynos4210()) { - /* set clock frequency for PLL */ - phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4210_CLKSEL_MASK; - - switch (clk_get_rate(xusbxti_clk)) { - case 12 * MHZ: - phyclk |= EXYNOS4210_CLKSEL_12M; - break; - case 48 * MHZ: - phyclk |= EXYNOS4210_CLKSEL_48M; - break; - default: - case 24 * MHZ: - phyclk |= EXYNOS4210_CLKSEL_24M; - break; - } - writel(phyclk, EXYNOS4_PHYCLK); - } else if (soc_is_exynos4212() || soc_is_exynos4412()) { - /* set clock frequency for PLL */ - phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4X12_CLKSEL_MASK; - - switch (clk_get_rate(xusbxti_clk)) { - case 9600 * KHZ: - phyclk |= EXYNOS4X12_CLKSEL_9600K; - break; - case 10 * MHZ: - phyclk |= EXYNOS4X12_CLKSEL_10M; - break; - case 12 * MHZ: - phyclk |= EXYNOS4X12_CLKSEL_12M; - break; - case 19200 * KHZ: - phyclk |= EXYNOS4X12_CLKSEL_19200K; - break; - case 20 * MHZ: - phyclk |= EXYNOS4X12_CLKSEL_20M; - break; - default: - case 24 * MHZ: - /* default reference clock */ - phyclk |= EXYNOS4X12_CLKSEL_24M; - break; - } - writel(phyclk, EXYNOS4_PHYCLK); - } - clk_put(xusbxti_clk); - } -} - -static int exynos4210_usb_phy0_init(struct platform_device *pdev) -{ - u32 rstcon; - - writel(readl(S5P_USBDEVICE_PHY_CONTROL) | S5P_USBDEVICE_PHY_ENABLE, - S5P_USBDEVICE_PHY_CONTROL); - - exynos4210_usb_phy_clkset(pdev); - - /* set to normal PHY0 */ - writel((readl(EXYNOS4_PHYPWR) & ~PHY0_NORMAL_MASK), EXYNOS4_PHYPWR); - - /* reset PHY0 and Link */ - rstcon = readl(EXYNOS4_RSTCON) | PHY0_SWRST_MASK; - writel(rstcon, EXYNOS4_RSTCON); - udelay(10); - - rstcon &= ~PHY0_SWRST_MASK; - writel(rstcon, EXYNOS4_RSTCON); - - return 0; -} - -static int exynos4210_usb_phy0_exit(struct platform_device *pdev) -{ - writel((readl(EXYNOS4_PHYPWR) | PHY0_ANALOG_POWERDOWN | - PHY0_OTG_DISABLE), EXYNOS4_PHYPWR); - - writel(readl(S5P_USBDEVICE_PHY_CONTROL) & ~S5P_USBDEVICE_PHY_ENABLE, - S5P_USBDEVICE_PHY_CONTROL); - - return 0; -} - -static int exynos4210_usb_phy1_init(struct platform_device *pdev) -{ - struct clk *otg_clk; - u32 rstcon; - int err; - - atomic_inc(&host_usage); - - otg_clk = clk_get(&pdev->dev, "otg"); - if (IS_ERR(otg_clk)) { - dev_err(&pdev->dev, "Failed to get otg clock\n"); - return PTR_ERR(otg_clk); - } - - err = clk_enable(otg_clk); - if (err) { - clk_put(otg_clk); - return err; - } - - if (exynos4_usb_host_phy_is_on()) - return 0; - - writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE, - S5P_USBHOST_PHY_CONTROL); - - exynos4210_usb_phy_clkset(pdev); - - /* floating prevention logic: disable */ - writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON); - - /* set to normal HSIC 0 and 1 of PHY1 */ - writel((readl(EXYNOS4_PHYPWR) & ~PHY1_HSIC_NORMAL_MASK), - EXYNOS4_PHYPWR); - - /* set to normal standard USB of PHY1 */ - writel((readl(EXYNOS4_PHYPWR) & ~PHY1_STD_NORMAL_MASK), EXYNOS4_PHYPWR); - - /* reset all ports of both PHY and Link */ - rstcon = readl(EXYNOS4_RSTCON) | HOST_LINK_PORT_SWRST_MASK | - PHY1_SWRST_MASK; - writel(rstcon, EXYNOS4_RSTCON); - udelay(10); - - rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK); - writel(rstcon, EXYNOS4_RSTCON); - udelay(80); - - clk_disable(otg_clk); - clk_put(otg_clk); - - return 0; -} - -static int exynos4210_usb_phy1_exit(struct platform_device *pdev) -{ - struct clk *otg_clk; - int err; - - if (atomic_dec_return(&host_usage) > 0) - return 0; - - otg_clk = clk_get(&pdev->dev, "otg"); - if (IS_ERR(otg_clk)) { - dev_err(&pdev->dev, "Failed to get otg clock\n"); - return PTR_ERR(otg_clk); - } - - err = clk_enable(otg_clk); - if (err) { - clk_put(otg_clk); - return err; - } - - writel((readl(EXYNOS4_PHYPWR) | PHY1_STD_ANALOG_POWERDOWN), - EXYNOS4_PHYPWR); - - writel(readl(S5P_USBHOST_PHY_CONTROL) & ~S5P_USBHOST_PHY_ENABLE, - S5P_USBHOST_PHY_CONTROL); - - clk_disable(otg_clk); - clk_put(otg_clk); - - return 0; -} - -int s5p_usb_phy_init(struct platform_device *pdev, int type) -{ - if (type == USB_PHY_TYPE_DEVICE) - return exynos4210_usb_phy0_init(pdev); - else if (type == USB_PHY_TYPE_HOST) - return exynos4210_usb_phy1_init(pdev); - - return -EINVAL; -} - -int s5p_usb_phy_exit(struct platform_device *pdev, int type) -{ - if (type == USB_PHY_TYPE_DEVICE) - return exynos4210_usb_phy0_exit(pdev); - else if (type == USB_PHY_TYPE_HOST) - return exynos4210_usb_phy1_exit(pdev); - - return -EINVAL; -} diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ba44328464f..60661a4b0e2 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -56,9 +56,6 @@ config MXC_USE_EPIT uses the same clocks as the GPT. Anyway, on some systems the GPT may be in use for other purposes. -config MXC_ULPI - bool - config ARCH_HAS_RNGA bool @@ -176,6 +173,7 @@ config ARCH_MX1ADS config MACH_SCB9328 bool "Synertronixx scb9328" select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX1 help Say Y here if you are using a Synertronixx scb9328 board @@ -233,7 +231,7 @@ config MACH_EUKREA_CPUIMX25SD select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX25 choice @@ -284,7 +282,7 @@ config MACH_PCM038 select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for phyCORE-i.MX27 (aka pcm038) platform. This @@ -314,7 +312,7 @@ config MACH_CPUIMX27 select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for Eukrea CPUIMX27 platform. This includes @@ -369,7 +367,7 @@ config MACH_MX27_3DS select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for MX27PDK platform. This includes specific @@ -414,7 +412,7 @@ config MACH_PCA100 select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for phyCARD-s (aka pca100) platform. This @@ -481,7 +479,7 @@ config MACH_MX31LILLY select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for mx31 based LILLY1131 modules. This includes @@ -497,7 +495,7 @@ config MACH_MX31LITE select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for MX31 LITEKIT platform. This includes specific @@ -514,7 +512,7 @@ config MACH_PCM037 select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for Phytec pcm037 platform. This includes @@ -544,7 +542,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for MX31PDK (3DS) platform. This includes specific @@ -571,7 +569,7 @@ config MACH_MX31MOBOARD select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for mx31moboard platform. This includes specific @@ -595,7 +593,7 @@ config MACH_ARMADILLO5X0 select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for Atmark Armadillo-500 platform. This includes @@ -639,7 +637,7 @@ config MACH_PCM043 select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX35 help Include support for Phytec pcm043 platform. This includes @@ -673,7 +671,7 @@ config MACH_EUKREA_CPUIMX35SD select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX35 help Include support for Eukrea CPUIMX35 platform. This includes @@ -816,6 +814,41 @@ config SOC_IMX6Q help This enables support for Freescale i.MX6 Quad processor. +config SOC_IMX6SL + bool "i.MX6 SoloLite support" + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + select ARM_GIC + select CPU_V7 + select HAVE_IMX_ANATOP + select HAVE_IMX_GPC + select HAVE_IMX_MMDC + select HAVE_IMX_SRC + select MFD_SYSCON + select PINCTRL + select PINCTRL_IMX6SL + select PL310_ERRATA_588369 if CACHE_PL310 + select PL310_ERRATA_727915 if CACHE_PL310 + select PL310_ERRATA_769419 if CACHE_PL310 + + help + This enables support for Freescale i.MX6 SoloLite processor. + +config SOC_VF610 + bool "Vybrid Family VF610 support" + select CPU_V7 + select ARM_GIC + select CLKSRC_OF + select PINCTRL + select PINCTRL_VF610 + select VF_PIT_TIMER + select PL310_ERRATA_588369 if CACHE_PL310 + select PL310_ERRATA_727915 if CACHE_PL310 + select PL310_ERRATA_769419 if CACHE_PL310 + + help + This enable support for Freescale Vybrid VF610 processor. + endif source "arch/arm/mach-imx/devices/Kconfig" diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 70ae7c490ac..e20f22d58fd 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o -obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o @@ -98,6 +97,7 @@ AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o +obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o @@ -111,4 +111,6 @@ obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o +obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o + obj-y += devices/ diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 6fc486b6a3c..04b1bad6835 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -73,6 +73,12 @@ static const char *mx53_cko2_sel[] = { "tve_sel", "lp_apm", "uart_root", "dummy"/* spdif0_clk_root */, "dummy", "dummy", }; +static const char *mx51_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", }; +static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw", }; +static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", }; +static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", }; +static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", }; + enum imx5_clks { dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred, @@ -110,7 +116,9 @@ enum imx5_clks { owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate, cko1_sel, cko1_podf, cko1, cko2_sel, cko2_podf, cko2, - srtc_gate, pata_gate, + srtc_gate, pata_gate, sata_gate, spdif_xtal_sel, spdif0_sel, + spdif1_sel, spdif0_pred, spdif0_podf, spdif1_pred, spdif1_podf, + spdif0_com_s, spdif1_com_sel, spdif0_gate, spdif1_gate, spdif_ipg_gate, clk_max }; @@ -123,11 +131,13 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, { int i; + of_clk_init(NULL); + clk[dummy] = imx_clk_fixed("dummy", 0); - clk[ckil] = imx_clk_fixed("ckil", rate_ckil); - clk[osc] = imx_clk_fixed("osc", rate_osc); - clk[ckih1] = imx_clk_fixed("ckih1", rate_ckih1); - clk[ckih2] = imx_clk_fixed("ckih2", rate_ckih2); + clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil); + clk[osc] = imx_obtain_fixed_clock("osc", rate_osc); + clk[ckih1] = imx_obtain_fixed_clock("ckih1", rate_ckih1); + clk[ckih2] = imx_obtain_fixed_clock("ckih2", rate_ckih2); clk[lp_apm] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1, lp_apm_sel, ARRAY_SIZE(lp_apm_sel)); @@ -267,6 +277,13 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22); clk[srtc_gate] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28); clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0); + clk[spdif0_sel] = imx_clk_mux("spdif0_sel", MXC_CCM_CSCMR2, 0, 2, spdif_sel, ARRAY_SIZE(spdif_sel)); + clk[spdif0_pred] = imx_clk_divider("spdif0_pred", "spdif0_sel", MXC_CCM_CDCDR, 25, 3); + clk[spdif0_podf] = imx_clk_divider("spdif0_podf", "spdif0_pred", MXC_CCM_CDCDR, 19, 6); + clk[spdif0_com_s] = imx_clk_mux_flags("spdif0_com_sel", MXC_CCM_CSCMR2, 4, 1, + spdif0_com_sel, ARRAY_SIZE(spdif0_com_sel), CLK_SET_RATE_PARENT); + clk[spdif0_gate] = imx_clk_gate2("spdif0_gate", "spdif0_com_sel", MXC_CCM_CCGR5, 26); + clk[spdif_ipg_gate] = imx_clk_gate2("spdif_ipg_gate", "ipg", MXC_CCM_CCGR5, 30); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) @@ -378,6 +395,15 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk[mipi_hsc2_gate] = imx_clk_gate2("mipi_hsc2_gate", "ipg", MXC_CCM_CCGR4, 8); clk[mipi_esc_gate] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10); clk[mipi_hsp_gate] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12); + clk[spdif_xtal_sel] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2, + mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel)); + clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2, + spdif_sel, ARRAY_SIZE(spdif_sel)); + clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3); + clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6); + clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1, + mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel)); + clk[spdif1_gate] = imx_clk_gate2("spdif1_gate", "spdif1_com_sel", MXC_CCM_CCGR5, 28); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) @@ -485,6 +511,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8); clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6); clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22); + clk[sata_gate] = imx_clk_gate2("sata_gate", "ipg", MXC_CCM_CCGR4, 2); clk[cko1_sel] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4, mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel)); @@ -495,6 +522,8 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel)); clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3); clk[cko2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24); + clk[spdif_xtal_sel] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2, + mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel)); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) @@ -542,42 +571,12 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, return 0; } -#ifdef CONFIG_OF -static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc, - unsigned long *ckih1, unsigned long *ckih2) -{ - struct device_node *np; - - /* retrieve the freqency of fixed clocks from device tree */ - for_each_compatible_node(np, NULL, "fixed-clock") { - u32 rate; - if (of_property_read_u32(np, "clock-frequency", &rate)) - continue; - - if (of_device_is_compatible(np, "fsl,imx-ckil")) - *ckil = rate; - else if (of_device_is_compatible(np, "fsl,imx-osc")) - *osc = rate; - else if (of_device_is_compatible(np, "fsl,imx-ckih1")) - *ckih1 = rate; - else if (of_device_is_compatible(np, "fsl,imx-ckih2")) - *ckih2 = rate; - } -} - int __init mx51_clocks_init_dt(void) { - unsigned long ckil, osc, ckih1, ckih2; - - clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2); - return mx51_clocks_init(ckil, osc, ckih1, ckih2); + return mx51_clocks_init(0, 0, 0, 0); } int __init mx53_clocks_init_dt(void) { - unsigned long ckil, osc, ckih1, ckih2; - - clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2); - return mx53_clocks_init(ckil, osc, ckih1, ckih2); + return mx53_clocks_init(0, 0, 0, 0); } -#endif diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 4e3148ce852..4282e99f5ca 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -238,7 +238,7 @@ enum mx6q_clks { pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg, ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, - usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max + usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, clk_max }; static struct clk *clk[clk_max]; @@ -270,27 +270,16 @@ static struct clk_div_table video_div_table[] = { { } }; -int __init mx6q_clocks_init(void) +static void __init imx6q_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; int i, irq; clk[dummy] = imx_clk_fixed("dummy", 0); - - /* retrieve the freqency of fixed clocks from device tree */ - for_each_compatible_node(np, NULL, "fixed-clock") { - u32 rate; - if (of_property_read_u32(np, "clock-frequency", &rate)) - continue; - - if (of_device_is_compatible(np, "fsl,imx-ckil")) - clk[ckil] = imx_clk_fixed("ckil", rate); - else if (of_device_is_compatible(np, "fsl,imx-ckih1")) - clk[ckih] = imx_clk_fixed("ckih", rate); - else if (of_device_is_compatible(np, "fsl,imx-osc")) - clk[osc] = imx_clk_fixed("osc", rate); - } + clk[ckil] = imx_obtain_fixed_clock("ckil", 0); + clk[ckih] = imx_obtain_fixed_clock("ckih1", 0); + clk[osc] = imx_obtain_fixed_clock("osc", 0); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); base = of_iomap(np, 0); @@ -312,7 +301,6 @@ int __init mx6q_clocks_init(void) clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); clk[pll6_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3); - clk[pll8_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll8_mlb", "osc", base + 0xd0, 0x0); /* * Bit 20 is the reserved and read-only bit, we do this only for: @@ -360,7 +348,7 @@ int __init mx6q_clocks_init(void) clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm"); + np = ccm_node; base = of_iomap(np, 0); WARN_ON(!base); ccm_base = base; @@ -481,7 +469,14 @@ int __init mx6q_clocks_init(void) clk[esai] = imx_clk_gate2("esai", "esai_podf", base + 0x6c, 16); clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); - clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); + if (cpu_is_imx6dl()) + /* + * The multiplexer and divider of imx6q clock gpu3d_shader get + * redefined/reused as gpu2d_core_sel and gpu2d_core_podf on imx6dl. + */ + clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24); + else + clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); clk[gpu3d_core] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26); clk[hdmi_iahb] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0); clk[hdmi_isfr] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4); @@ -499,7 +494,14 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); + if (cpu_is_imx6dl()) + /* + * The multiplexer and divider of the imx6q clock gpu2d get + * redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl. + */ + clk[mlb] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18); + else + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); @@ -528,6 +530,7 @@ int __init mx6q_clocks_init(void) clk[usdhc2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); clk[usdhc3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); clk[usdhc4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); + clk[eim_slow] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10); clk[vdo_axi] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12); clk[vpu_axi] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14); clk[cko1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); @@ -547,6 +550,8 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); clk_register_clkdev(clk[arm], NULL, "cpu0"); + clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL); + clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL); if (imx6q_revision() != IMX_CHIP_REVISION_1_0) { clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]); @@ -576,6 +581,5 @@ int __init mx6q_clocks_init(void) WARN_ON(!base); irq = irq_of_parse_and_map(np, 0); mxc_timer_init(base, irq); - - return 0; } +CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c new file mode 100644 index 00000000000..a307ac22dff --- /dev/null +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -0,0 +1,267 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <dt-bindings/clock/imx6sl-clock.h> + +#include "clk.h" +#include "common.h" + +static const char const *step_sels[] = { "osc", "pll2_pfd2", }; +static const char const *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char const *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", }; +static const char const *ocram_sels[] = { "periph", "ocram_alt_sels", }; +static const char const *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", }; +static const char const *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char const *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; +static const char const *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; +static const char const *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; +static const char const *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; +static const char const *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; +static const char const *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_post_div", "dummy", }; +static const char const *perclk_sels[] = { "ipg", "osc", }; +static const char const *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", }; +static const char const *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; +static const char const *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; +static const char const *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; +static const char const *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", }; +static const char const *audio_sels[] = { "pll4_post_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; +static const char const *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char const *uart_sels[] = { "pll3_80m", "osc", }; + +static struct clk_div_table clk_enet_ref_table[] = { + { .val = 0, .div = 20, }, + { .val = 1, .div = 10, }, + { .val = 2, .div = 5, }, + { .val = 3, .div = 4, }, + { } +}; + +static struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + +static struct clk *clks[IMX6SL_CLK_CLK_END]; +static struct clk_onecell_data clk_data; + +static void __init imx6sl_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + void __iomem *base; + int irq; + int i; + + clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); + clks[IMX6SL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop"); + base = of_iomap(np, 0); + WARN_ON(!base); + + /* type name parent base div_mask */ + clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); + clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); + clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); + clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); + clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); + clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); + clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3); + + /* + * usbphy1 and usbphy2 are implemented as dummy gates using reserve + * bit 20. They are used by phy driver to keep the refcount of + * parent PLL correct. usbphy1_gate and usbphy2_gate only needs to be + * turned on during boot, and software will not need to control it + * anymore after that. + */ + clks[IMX6SL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); + clks[IMX6SL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); + clks[IMX6SL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); + clks[IMX6SL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); + + /* dev name parent_name flags reg shift width div: flags, div_table lock */ + clks[IMX6SL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + clks[IMX6SL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock); + + /* name parent_name reg idx */ + clks[IMX6SL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0", "pll2_bus", base + 0x100, 0); + clks[IMX6SL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", base + 0x100, 1); + clks[IMX6SL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", base + 0x100, 2); + clks[IMX6SL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0", "pll3_usb_otg", base + 0xf0, 0); + clks[IMX6SL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", base + 0xf0, 1); + clks[IMX6SL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", base + 0xf0, 2); + clks[IMX6SL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", base + 0xf0, 3); + + /* name parent_name mult div */ + clks[IMX6SL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2", 1, 2); + clks[IMX6SL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); + clks[IMX6SL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); + clks[IMX6SL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); + + np = ccm_node; + base = of_iomap(np, 0); + WARN_ON(!base); + + /* name reg shift width parent_names num_parents */ + clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); + clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); + clks[IMX6SL_CLK_OCRAM_ALT_SEL] = imx_clk_mux("ocram_alt_sel", base + 0x14, 7, 1, ocram_alt_sels, ARRAY_SIZE(ocram_alt_sels)); + clks[IMX6SL_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 1, ocram_sels, ARRAY_SIZE(ocram_sels)); + clks[IMX6SL_CLK_PRE_PERIPH2_SEL] = imx_clk_mux("pre_periph2_sel", base + 0x18, 21, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); + clks[IMX6SL_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); + clks[IMX6SL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); + clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels)); + clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels)); + clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SL_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SL_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); + clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels)); + clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels)); + clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels)); + clks[IMX6SL_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", base + 0x18, 8, 2, gpu2d_sels, ARRAY_SIZE(gpu2d_sels)); + clks[IMX6SL_CLK_LCDIF_PIX_SEL] = imx_clk_mux("lcdif_pix_sel", base + 0x38, 6, 3, lcdif_pix_sels, ARRAY_SIZE(lcdif_pix_sels)); + clks[IMX6SL_CLK_EPDC_PIX_SEL] = imx_clk_mux("epdc_pix_sel", base + 0x38, 15, 3, epdc_pix_sels, ARRAY_SIZE(epdc_pix_sels)); + clks[IMX6SL_CLK_SPDIF0_SEL] = imx_clk_mux("spdif0_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SL_CLK_SPDIF1_SEL] = imx_clk_mux("spdif1_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); + clks[IMX6SL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); + + /* name reg shift width busy: reg, shift parent_names num_parents */ + clks[IMX6SL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); + clks[IMX6SL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); + + /* name parent_name reg shift width */ + clks[IMX6SL_CLK_OCRAM_PODF] = imx_clk_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3); + clks[IMX6SL_CLK_PERIPH_CLK2_PODF] = imx_clk_divider("periph_clk2_podf", "periph_clk2_sel", base + 0x14, 27, 3); + clks[IMX6SL_CLK_PERIPH2_CLK2_PODF] = imx_clk_divider("periph2_clk2_podf", "periph2_clk2_sel", base + 0x14, 0, 3); + clks[IMX6SL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); + clks[IMX6SL_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3); + clks[IMX6SL_CLK_LCDIF_AXI_PODF] = imx_clk_divider("lcdif_axi_podf", "lcdif_axi_sel", base + 0x3c, 16, 3); + clks[IMX6SL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); + clks[IMX6SL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); + clks[IMX6SL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); + clks[IMX6SL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); + clks[IMX6SL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); + clks[IMX6SL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); + clks[IMX6SL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); + clks[IMX6SL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); + clks[IMX6SL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); + clks[IMX6SL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); + clks[IMX6SL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SL_CLK_PXP_AXI_PODF] = imx_clk_divider("pxp_axi_podf", "pxp_axi_sel", base + 0x34, 3, 3); + clks[IMX6SL_CLK_EPDC_AXI_PODF] = imx_clk_divider("epdc_axi_podf", "epdc_axi_sel", base + 0x34, 12, 3); + clks[IMX6SL_CLK_GPU2D_OVG_PODF] = imx_clk_divider("gpu2d_ovg_podf", "gpu2d_ovg_sel", base + 0x18, 26, 3); + clks[IMX6SL_CLK_GPU2D_PODF] = imx_clk_divider("gpu2d_podf", "gpu2d_sel", base + 0x18, 29, 3); + clks[IMX6SL_CLK_LCDIF_PIX_PRED] = imx_clk_divider("lcdif_pix_pred", "lcdif_pix_sel", base + 0x38, 3, 3); + clks[IMX6SL_CLK_EPDC_PIX_PRED] = imx_clk_divider("epdc_pix_pred", "epdc_pix_sel", base + 0x38, 12, 3); + clks[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3); + clks[IMX6SL_CLK_EPDC_PIX_PODF] = imx_clk_divider("epdc_pix_podf", "epdc_pix_pred", base + 0x18, 23, 3); + clks[IMX6SL_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", base + 0x30, 25, 3); + clks[IMX6SL_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", base + 0x30, 22, 3); + clks[IMX6SL_CLK_SPDIF1_PRED] = imx_clk_divider("spdif1_pred", "spdif1_sel", base + 0x30, 12, 3); + clks[IMX6SL_CLK_SPDIF1_PODF] = imx_clk_divider("spdif1_podf", "spdif1_pred", base + 0x30, 9, 3); + clks[IMX6SL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x28, 9, 3); + clks[IMX6SL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x28, 25, 3); + clks[IMX6SL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "ecspi_sel", base + 0x38, 19, 6); + clks[IMX6SL_CLK_UART_ROOT] = imx_clk_divider("uart_root", "uart_sel", base + 0x24, 0, 6); + + /* name parent_name reg shift width busy: reg, shift */ + clks[IMX6SL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); + clks[IMX6SL_CLK_MMDC_ROOT] = imx_clk_busy_divider("mmdc", "periph2", base + 0x14, 3, 3, base + 0x48, 2); + clks[IMX6SL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); + + /* name parent_name reg shift */ + clks[IMX6SL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0); + clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); + clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); + clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); + clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); + clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); + clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16); + clks[IMX6SL_CLK_GPT] = imx_clk_gate2("gpt", "perclk", base + 0x6c, 20); + clks[IMX6SL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22); + clks[IMX6SL_CLK_GPU2D_OVG] = imx_clk_gate2("gpu2d_ovg", "gpu2d_ovg_podf", base + 0x6c, 26); + clks[IMX6SL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); + clks[IMX6SL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); + clks[IMX6SL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); + clks[IMX6SL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); + clks[IMX6SL_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x74, 0); + clks[IMX6SL_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "pxp_axi_podf", base + 0x74, 2); + clks[IMX6SL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_axi", "epdc_axi_podf", base + 0x74, 4); + clks[IMX6SL_CLK_LCDIF_AXI] = imx_clk_gate2("lcdif_axi", "lcdif_axi_podf", base + 0x74, 6); + clks[IMX6SL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_pix_podf", base + 0x74, 8); + clks[IMX6SL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_pix_podf", base + 0x74, 10); + clks[IMX6SL_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28); + clks[IMX6SL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); + clks[IMX6SL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); + clks[IMX6SL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); + clks[IMX6SL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); + clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6); + clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif0_podf", base + 0x7c, 14); + clks[IMX6SL_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18); + clks[IMX6SL_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20); + clks[IMX6SL_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22); + clks[IMX6SL_CLK_UART] = imx_clk_gate2("uart", "ipg", base + 0x7c, 24); + clks[IMX6SL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_root", base + 0x7c, 26); + clks[IMX6SL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); + clks[IMX6SL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); + clks[IMX6SL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); + clks[IMX6SL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); + clks[IMX6SL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); + + for (i = 0; i < ARRAY_SIZE(clks); i++) + if (IS_ERR(clks[i])) + pr_err("i.MX6SL clk %d: register failed with %ld\n", + i, PTR_ERR(clks[i])); + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0"); + clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0"); + + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { + clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]); + clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]); + } + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt"); + base = of_iomap(np, 0); + WARN_ON(!base); + irq = irq_of_parse_and_map(np, 0); + mxc_timer_init(base, irq); +} +CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init); diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index d09bc3df9a7..a9fad5f8d34 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -296,13 +296,6 @@ static const struct clk_ops clk_pllv3_enet_ops = { .recalc_rate = clk_pllv3_enet_recalc_rate, }; -static const struct clk_ops clk_pllv3_mlb_ops = { - .prepare = clk_pllv3_prepare, - .unprepare = clk_pllv3_unprepare, - .enable = clk_pllv3_enable, - .disable = clk_pllv3_disable, -}; - struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, const char *parent_name, void __iomem *base, u32 div_mask) @@ -330,9 +323,6 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, case IMX_PLLV3_ENET: ops = &clk_pllv3_enet_ops; break; - case IMX_PLLV3_MLB: - ops = &clk_pllv3_mlb_ops; - break; default: ops = &clk_pllv3_ops; } diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c new file mode 100644 index 00000000000..d617c0b7c80 --- /dev/null +++ b/arch/arm/mach-imx/clk-vf610.c @@ -0,0 +1,319 @@ +/* + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/of_address.h> +#include <linux/clk.h> +#include <dt-bindings/clock/vf610-clock.h> + +#include "clk.h" + +#define CCM_CCR (ccm_base + 0x00) +#define CCM_CSR (ccm_base + 0x04) +#define CCM_CCSR (ccm_base + 0x08) +#define CCM_CACRR (ccm_base + 0x0c) +#define CCM_CSCMR1 (ccm_base + 0x10) +#define CCM_CSCDR1 (ccm_base + 0x14) +#define CCM_CSCDR2 (ccm_base + 0x18) +#define CCM_CSCDR3 (ccm_base + 0x1c) +#define CCM_CSCMR2 (ccm_base + 0x20) +#define CCM_CSCDR4 (ccm_base + 0x24) +#define CCM_CLPCR (ccm_base + 0x2c) +#define CCM_CISR (ccm_base + 0x30) +#define CCM_CIMR (ccm_base + 0x34) +#define CCM_CGPR (ccm_base + 0x3c) +#define CCM_CCGR0 (ccm_base + 0x40) +#define CCM_CCGR1 (ccm_base + 0x44) +#define CCM_CCGR2 (ccm_base + 0x48) +#define CCM_CCGR3 (ccm_base + 0x4c) +#define CCM_CCGR4 (ccm_base + 0x50) +#define CCM_CCGR5 (ccm_base + 0x54) +#define CCM_CCGR6 (ccm_base + 0x58) +#define CCM_CCGR7 (ccm_base + 0x5c) +#define CCM_CCGR8 (ccm_base + 0x60) +#define CCM_CCGR9 (ccm_base + 0x64) +#define CCM_CCGR10 (ccm_base + 0x68) +#define CCM_CCGR11 (ccm_base + 0x6c) +#define CCM_CMEOR0 (ccm_base + 0x70) +#define CCM_CMEOR1 (ccm_base + 0x74) +#define CCM_CMEOR2 (ccm_base + 0x78) +#define CCM_CMEOR3 (ccm_base + 0x7c) +#define CCM_CMEOR4 (ccm_base + 0x80) +#define CCM_CMEOR5 (ccm_base + 0x84) +#define CCM_CPPDSR (ccm_base + 0x88) +#define CCM_CCOWR (ccm_base + 0x8c) +#define CCM_CCPGR0 (ccm_base + 0x90) +#define CCM_CCPGR1 (ccm_base + 0x94) +#define CCM_CCPGR2 (ccm_base + 0x98) +#define CCM_CCPGR3 (ccm_base + 0x9c) + +#define CCM_CCGRx_CGn(n) ((n) * 2) + +#define PFD_PLL1_BASE (anatop_base + 0x2b0) +#define PFD_PLL2_BASE (anatop_base + 0x100) +#define PFD_PLL3_BASE (anatop_base + 0xf0) + +static void __iomem *anatop_base; +static void __iomem *ccm_base; + +/* sources for multiplexer clocks, this is used multiple times */ +static const char const *fast_sels[] = { "firc", "fxosc", }; +static const char const *slow_sels[] = { "sirc_32k", "sxosc", }; +static const char const *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; +static const char const *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; +static const char const *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", }; +static const char const *ddr_sels[] = { "pll2_pfd2", "sys_sel", }; +static const char const *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", }; +static const char const *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", }; +static const char const *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char const *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char const *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", }; +static const char const *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; +static const char const *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; +static const char const *dcu_sels[] = { "pll1_pfd2", "pll3_main", }; +static const char const *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", }; +static const char const *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", }; +/* FTM counter clock source, not module clock */ +static const char const *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", }; +static const char const *ftm_fix_sels[] = { "sxosc", "ipg_bus", }; + +static struct clk_div_table pll4_main_div_table[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 6 }, + { .val = 3, .div = 8 }, + { .val = 4, .div = 10 }, + { .val = 5, .div = 12 }, + { .val = 6, .div = 14 }, + { .val = 7, .div = 16 }, + { } +}; + +static struct clk *clk[VF610_CLK_END]; +static struct clk_onecell_data clk_data; + +static void __init vf610_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + + clk[VF610_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + clk[VF610_CLK_SIRC_128K] = imx_clk_fixed("sirc_128k", 128000); + clk[VF610_CLK_SIRC_32K] = imx_clk_fixed("sirc_32k", 32000); + clk[VF610_CLK_FIRC] = imx_clk_fixed("firc", 24000000); + + clk[VF610_CLK_SXOSC] = imx_obtain_fixed_clock("sxosc", 0); + clk[VF610_CLK_FXOSC] = imx_obtain_fixed_clock("fxosc", 0); + clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0); + clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0); + + clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2); + + np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop"); + anatop_base = of_iomap(np, 0); + BUG_ON(!anatop_base); + + np = ccm_node; + ccm_base = of_iomap(np, 0); + BUG_ON(!ccm_base); + + clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels)); + clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels)); + + clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1); + clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0); + clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1); + clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2); + clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3); + + clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1); + clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0); + clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1); + clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2); + clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3); + + clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1); + clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0); + clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1); + clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2); + clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3); + + clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1); + /* Enet pll: fixed 50Mhz */ + clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6); + /* pll6: default 960Mhz */ + clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1); + clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5); + clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5); + clk[VF610_CLK_SYS_SEL] = imx_clk_mux("sys_sel", CCM_CCSR, 0, 3, sys_sels, ARRAY_SIZE(sys_sels)); + clk[VF610_CLK_DDR_SEL] = imx_clk_mux("ddr_sel", CCM_CCSR, 6, 1, ddr_sels, ARRAY_SIZE(ddr_sels)); + clk[VF610_CLK_SYS_BUS] = imx_clk_divider("sys_bus", "sys_sel", CCM_CACRR, 0, 3); + clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3); + clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2); + + clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1); + clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock); + clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1); + + clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "pll3_main", CCM_CCGR1, CCM_CCGRx_CGn(4)); + clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "pll3_main", CCM_CCGR7, CCM_CCGRx_CGn(4)); + + clk[VF610_CLK_QSPI0_SEL] = imx_clk_mux("qspi0_sel", CCM_CSCMR1, 22, 2, qspi_sels, 4); + clk[VF610_CLK_QSPI0_EN] = imx_clk_gate("qspi0_en", "qspi0_sel", CCM_CSCDR3, 4); + clk[VF610_CLK_QSPI0_X4_DIV] = imx_clk_divider("qspi0_x4", "qspi0_en", CCM_CSCDR3, 0, 2); + clk[VF610_CLK_QSPI0_X2_DIV] = imx_clk_divider("qspi0_x2", "qspi0_x4", CCM_CSCDR3, 2, 1); + clk[VF610_CLK_QSPI0_X1_DIV] = imx_clk_divider("qspi0_x1", "qspi0_x2", CCM_CSCDR3, 3, 1); + clk[VF610_CLK_QSPI0] = imx_clk_gate2("qspi0", "qspi0_x1", CCM_CCGR2, CCM_CCGRx_CGn(4)); + + clk[VF610_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", CCM_CSCMR1, 24, 2, qspi_sels, 4); + clk[VF610_CLK_QSPI1_EN] = imx_clk_gate("qspi1_en", "qspi1_sel", CCM_CSCDR3, 12); + clk[VF610_CLK_QSPI1_X4_DIV] = imx_clk_divider("qspi1_x4", "qspi1_en", CCM_CSCDR3, 8, 2); + clk[VF610_CLK_QSPI1_X2_DIV] = imx_clk_divider("qspi1_x2", "qspi1_x4", CCM_CSCDR3, 10, 1); + clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1); + clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4)); + + clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10); + clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20); + clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4); + clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7); + clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24); + clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23); + + clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7)); + + clk[VF610_CLK_UART0] = imx_clk_gate2("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7)); + clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8)); + clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9)); + clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10)); + + clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6)); + clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7)); + + clk[VF610_CLK_DSPI0] = imx_clk_gate2("dspi0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(12)); + clk[VF610_CLK_DSPI1] = imx_clk_gate2("dspi1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(13)); + clk[VF610_CLK_DSPI2] = imx_clk_gate2("dspi2", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(12)); + clk[VF610_CLK_DSPI3] = imx_clk_gate2("dspi3", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(13)); + + clk[VF610_CLK_WDT] = imx_clk_gate2("wdt", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(14)); + + clk[VF610_CLK_ESDHC0_SEL] = imx_clk_mux("esdhc0_sel", CCM_CSCMR1, 16, 2, esdhc_sels, 4); + clk[VF610_CLK_ESDHC0_EN] = imx_clk_gate("esdhc0_en", "esdhc0_sel", CCM_CSCDR2, 28); + clk[VF610_CLK_ESDHC0_DIV] = imx_clk_divider("esdhc0_div", "esdhc0_en", CCM_CSCDR2, 16, 4); + clk[VF610_CLK_ESDHC0] = imx_clk_gate2("eshc0", "esdhc0_div", CCM_CCGR7, CCM_CCGRx_CGn(1)); + + clk[VF610_CLK_ESDHC1_SEL] = imx_clk_mux("esdhc1_sel", CCM_CSCMR1, 18, 2, esdhc_sels, 4); + clk[VF610_CLK_ESDHC1_EN] = imx_clk_gate("esdhc1_en", "esdhc1_sel", CCM_CSCDR2, 29); + clk[VF610_CLK_ESDHC1_DIV] = imx_clk_divider("esdhc1_div", "esdhc1_en", CCM_CSCDR2, 20, 4); + clk[VF610_CLK_ESDHC1] = imx_clk_gate2("eshc1", "esdhc1_div", CCM_CCGR7, CCM_CCGRx_CGn(2)); + + /* + * ftm_ext_clk and ftm_fix_clk are FTM timer counter's + * selectable clock sources, both use a common enable bit + * in CCM_CSCDR1, selecting "dummy" clock as parent of + * "ftm0_ext_fix" make it serve only for enable/disable. + */ + clk[VF610_CLK_FTM0_EXT_SEL] = imx_clk_mux("ftm0_ext_sel", CCM_CSCMR2, 6, 2, ftm_ext_sels, 4); + clk[VF610_CLK_FTM0_FIX_SEL] = imx_clk_mux("ftm0_fix_sel", CCM_CSCMR2, 14, 1, ftm_fix_sels, 2); + clk[VF610_CLK_FTM0_EXT_FIX_EN] = imx_clk_gate("ftm0_ext_fix_en", "dummy", CCM_CSCDR1, 25); + clk[VF610_CLK_FTM1_EXT_SEL] = imx_clk_mux("ftm1_ext_sel", CCM_CSCMR2, 8, 2, ftm_ext_sels, 4); + clk[VF610_CLK_FTM1_FIX_SEL] = imx_clk_mux("ftm1_fix_sel", CCM_CSCMR2, 15, 1, ftm_fix_sels, 2); + clk[VF610_CLK_FTM1_EXT_FIX_EN] = imx_clk_gate("ftm1_ext_fix_en", "dummy", CCM_CSCDR1, 26); + clk[VF610_CLK_FTM2_EXT_SEL] = imx_clk_mux("ftm2_ext_sel", CCM_CSCMR2, 10, 2, ftm_ext_sels, 4); + clk[VF610_CLK_FTM2_FIX_SEL] = imx_clk_mux("ftm2_fix_sel", CCM_CSCMR2, 16, 1, ftm_fix_sels, 2); + clk[VF610_CLK_FTM2_EXT_FIX_EN] = imx_clk_gate("ftm2_ext_fix_en", "dummy", CCM_CSCDR1, 27); + clk[VF610_CLK_FTM3_EXT_SEL] = imx_clk_mux("ftm3_ext_sel", CCM_CSCMR2, 12, 2, ftm_ext_sels, 4); + clk[VF610_CLK_FTM3_FIX_SEL] = imx_clk_mux("ftm3_fix_sel", CCM_CSCMR2, 17, 1, ftm_fix_sels, 2); + clk[VF610_CLK_FTM3_EXT_FIX_EN] = imx_clk_gate("ftm3_ext_fix_en", "dummy", CCM_CSCDR1, 28); + + /* ftm(n)_clk are FTM module operation clock */ + clk[VF610_CLK_FTM0] = imx_clk_gate2("ftm0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(8)); + clk[VF610_CLK_FTM1] = imx_clk_gate2("ftm1", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(9)); + clk[VF610_CLK_FTM2] = imx_clk_gate2("ftm2", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(8)); + clk[VF610_CLK_FTM3] = imx_clk_gate2("ftm3", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(9)); + + clk[VF610_CLK_DCU0_SEL] = imx_clk_mux("dcu0_sel", CCM_CSCMR1, 28, 1, dcu_sels, 2); + clk[VF610_CLK_DCU0_EN] = imx_clk_gate("dcu0_en", "dcu0_sel", CCM_CSCDR3, 19); + clk[VF610_CLK_DCU0_DIV] = imx_clk_divider("dcu0_div", "dcu0_en", CCM_CSCDR3, 16, 3); + clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "dcu0_div", CCM_CCGR3, CCM_CCGRx_CGn(8)); + clk[VF610_CLK_DCU1_SEL] = imx_clk_mux("dcu1_sel", CCM_CSCMR1, 29, 1, dcu_sels, 2); + clk[VF610_CLK_DCU1_EN] = imx_clk_gate("dcu1_en", "dcu1_sel", CCM_CSCDR3, 23); + clk[VF610_CLK_DCU1_DIV] = imx_clk_divider("dcu1_div", "dcu1_en", CCM_CSCDR3, 20, 3); + clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "dcu1_div", CCM_CCGR9, CCM_CCGRx_CGn(8)); + + clk[VF610_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", CCM_CSCMR1, 20, 2, esai_sels, 4); + clk[VF610_CLK_ESAI_EN] = imx_clk_gate("esai_en", "esai_sel", CCM_CSCDR2, 30); + clk[VF610_CLK_ESAI_DIV] = imx_clk_divider("esai_div", "esai_en", CCM_CSCDR2, 24, 4); + clk[VF610_CLK_ESAI] = imx_clk_gate2("esai", "esai_div", CCM_CCGR4, CCM_CCGRx_CGn(2)); + + clk[VF610_CLK_SAI0_SEL] = imx_clk_mux("sai0_sel", CCM_CSCMR1, 0, 2, sai_sels, 4); + clk[VF610_CLK_SAI0_EN] = imx_clk_gate("sai0_en", "sai0_sel", CCM_CSCDR1, 16); + clk[VF610_CLK_SAI0_DIV] = imx_clk_divider("sai0_div", "sai0_en", CCM_CSCDR1, 0, 4); + clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "sai0_div", CCM_CCGR0, CCM_CCGRx_CGn(15)); + + clk[VF610_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", CCM_CSCMR1, 2, 2, sai_sels, 4); + clk[VF610_CLK_SAI1_EN] = imx_clk_gate("sai1_en", "sai1_sel", CCM_CSCDR1, 17); + clk[VF610_CLK_SAI1_DIV] = imx_clk_divider("sai1_div", "sai1_en", CCM_CSCDR1, 4, 4); + clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "sai1_div", CCM_CCGR1, CCM_CCGRx_CGn(0)); + + clk[VF610_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", CCM_CSCMR1, 4, 2, sai_sels, 4); + clk[VF610_CLK_SAI2_EN] = imx_clk_gate("sai2_en", "sai2_sel", CCM_CSCDR1, 18); + clk[VF610_CLK_SAI2_DIV] = imx_clk_divider("sai2_div", "sai2_en", CCM_CSCDR1, 8, 4); + clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "sai2_div", CCM_CCGR1, CCM_CCGRx_CGn(1)); + + clk[VF610_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", CCM_CSCMR1, 6, 2, sai_sels, 4); + clk[VF610_CLK_SAI3_EN] = imx_clk_gate("sai3_en", "sai3_sel", CCM_CSCDR1, 19); + clk[VF610_CLK_SAI3_DIV] = imx_clk_divider("sai3_div", "sai3_en", CCM_CSCDR1, 12, 4); + clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "sai3_div", CCM_CCGR1, CCM_CCGRx_CGn(2)); + + clk[VF610_CLK_NFC_SEL] = imx_clk_mux("nfc_sel", CCM_CSCMR1, 12, 2, nfc_sels, 4); + clk[VF610_CLK_NFC_EN] = imx_clk_gate("nfc_en", "nfc_sel", CCM_CSCDR2, 9); + clk[VF610_CLK_NFC_PRE_DIV] = imx_clk_divider("nfc_pre_div", "nfc_en", CCM_CSCDR3, 13, 3); + clk[VF610_CLK_NFC_FRAC_DIV] = imx_clk_divider("nfc_frac_div", "nfc_pre_div", CCM_CSCDR2, 4, 4); + clk[VF610_CLK_NFC] = imx_clk_gate2("nfc", "nfc_frac_div", CCM_CCGR10, CCM_CCGRx_CGn(0)); + + clk[VF610_CLK_GPU_SEL] = imx_clk_mux("gpu_sel", CCM_CSCMR1, 14, 1, gpu_sels, 2); + clk[VF610_CLK_GPU_EN] = imx_clk_gate("gpu_en", "gpu_sel", CCM_CSCDR2, 10); + clk[VF610_CLK_GPU2D] = imx_clk_gate2("gpu", "gpu_en", CCM_CCGR8, CCM_CCGRx_CGn(15)); + + clk[VF610_CLK_VADC_SEL] = imx_clk_mux("vadc_sel", CCM_CSCMR1, 8, 2, vadc_sels, 3); + clk[VF610_CLK_VADC_EN] = imx_clk_gate("vadc_en", "vadc_sel", CCM_CSCDR1, 22); + clk[VF610_CLK_VADC_DIV] = imx_clk_divider("vadc_div", "vadc_en", CCM_CSCDR1, 20, 2); + clk[VF610_CLK_VADC_DIV_HALF] = imx_clk_fixed_factor("vadc_div_half", "vadc_div", 1, 2); + clk[VF610_CLK_VADC] = imx_clk_gate2("vadc", "vadc_div", CCM_CCGR8, CCM_CCGRx_CGn(7)); + + clk[VF610_CLK_ADC0] = imx_clk_gate2("adc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(11)); + clk[VF610_CLK_ADC1] = imx_clk_gate2("adc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(11)); + clk[VF610_CLK_DAC0] = imx_clk_gate2("dac0", "ipg_bus", CCM_CCGR8, CCM_CCGRx_CGn(12)); + clk[VF610_CLK_DAC1] = imx_clk_gate2("dac1", "ipg_bus", CCM_CCGR8, CCM_CCGRx_CGn(13)); + + clk[VF610_CLK_ASRC] = imx_clk_gate2("asrc", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(1)); + + clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(0)); + clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(4)); + + clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]); + clk_set_rate(clk[VF610_CLK_QSPI0_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_SEL]) / 2); + clk_set_rate(clk[VF610_CLK_QSPI0_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X4_DIV]) / 2); + clk_set_rate(clk[VF610_CLK_QSPI0_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X2_DIV]) / 2); + + clk_set_parent(clk[VF610_CLK_QSPI1_SEL], clk[VF610_CLK_PLL1_PFD4]); + clk_set_rate(clk[VF610_CLK_QSPI1_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_SEL]) / 2); + clk_set_rate(clk[VF610_CLK_QSPI1_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X4_DIV]) / 2); + clk_set_rate(clk[VF610_CLK_QSPI1_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X2_DIV]) / 2); + + clk_set_parent(clk[VF610_CLK_SAI0_SEL], clk[VF610_CLK_AUDIO_EXT]); + clk_set_parent(clk[VF610_CLK_SAI1_SEL], clk[VF610_CLK_AUDIO_EXT]); + clk_set_parent(clk[VF610_CLK_SAI2_SEL], clk[VF610_CLK_AUDIO_EXT]); + clk_set_parent(clk[VF610_CLK_SAI3_SEL], clk[VF610_CLK_AUDIO_EXT]); + + /* Add the clocks to provider list */ + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} +CLK_OF_DECLARE(vf610, "fsl,vf610-ccm", vf610_clocks_init); diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c index 37e884ed1cd..55bc80a0066 100644 --- a/arch/arm/mach-imx/clk.c +++ b/arch/arm/mach-imx/clk.c @@ -1,4 +1,39 @@ +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include "clk.h" DEFINE_SPINLOCK(imx_ccm_lock); + +static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name) +{ + struct of_phandle_args phandle; + struct clk *clk = ERR_PTR(-ENODEV); + char *path; + + path = kasprintf(GFP_KERNEL, "/clocks/%s", name); + if (!path) + return ERR_PTR(-ENOMEM); + + phandle.np = of_find_node_by_path(path); + kfree(path); + + if (phandle.np) { + clk = of_clk_get_from_provider(&phandle); + of_node_put(phandle.np); + } + return clk; +} + +struct clk * __init imx_obtain_fixed_clock( + const char *name, unsigned long rate) +{ + struct clk *clk; + + clk = imx_obtain_fixed_clock_from_dt(name); + if (IS_ERR(clk)) + clk = imx_clk_fixed(name, rate); + return clk; +} diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index d9d9d9c66df..0e4e8bb261b 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -18,7 +18,6 @@ enum imx_pllv3_type { IMX_PLLV3_USB, IMX_PLLV3_AV, IMX_PLLV3_ENET, - IMX_PLLV3_MLB, }; struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, @@ -29,6 +28,9 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, void __iomem *reg, u8 bit_idx, u8 clk_gate_flags, spinlock_t *lock); +struct clk * imx_obtain_fixed_clock( + const char *name, unsigned long rate); + static inline struct clk *imx_clk_gate2(const char *name, const char *parent, void __iomem *reg, u8 shift) { diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index c08ae3f99ce..ee78847abf4 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -68,12 +68,12 @@ extern int mx27_clocks_init_dt(void); extern int mx31_clocks_init_dt(void); extern int mx51_clocks_init_dt(void); extern int mx53_clocks_init_dt(void); -extern int mx6q_clocks_init(void); extern struct platform_device *mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_restart(char, const char *); extern void mxc_arch_reset_init(void __iomem *); +extern void mxc_arch_reset_init_dt(void); extern int mx53_revision(void); extern int imx6q_revision(void); extern int mx53_display_revision(void); diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 356131f7b59..a3b0b04b45c 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -20,6 +20,7 @@ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ #define __ASM_ARCH_MXC_HARDWARE_H__ +#include <asm/io.h> #include <asm/sizes.h> #define addr_in_module(addr, mod) \ diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index 82348391582..3e1ec5ffe63 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -19,6 +19,8 @@ static void __init imx25_dt_init(void) { + mxc_arch_reset_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 4aaead0a77f..4e235ecb402 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -22,6 +22,8 @@ static void __init imx27_dt_init(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + mxc_arch_reset_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_full(&devinfo); diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index 67de611e29a..818a1cc2fe4 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -20,6 +20,8 @@ static void __init imx31_dt_init(void) { + mxc_arch_reset_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index ab24cc32211..53e43e579dd 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -23,6 +23,8 @@ static void __init imx51_dt_init(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + mxc_arch_reset_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_full(&devinfo); } diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c index 4b34f52dc46..0a920d18486 100644 --- a/arch/arm/mach-imx/irq-common.c +++ b/arch/arm/mach-imx/irq-common.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/irq.h> +#include <linux/platform_data/asoc-imx-ssi.h> #include "irq-common.h" diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index f579c616fee..74e7b94c22e 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -21,6 +21,7 @@ #include <asm/mach/time.h> #include "common.h" +#include "hardware.h" #include "mx53.h" static void __init imx53_qsb_init(void) @@ -38,6 +39,8 @@ static void __init imx53_qsb_init(void) static void __init imx53_dt_init(void) { + mxc_arch_reset_init_dt(); + if (of_machine_is_compatible("fsl,imx53-qsb")) imx53_qsb_init(); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5536fd81379..f5965220a4d 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -11,6 +11,7 @@ */ #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/clkdev.h> #include <linux/clocksource.h> #include <linux/cpu.h> @@ -145,6 +146,45 @@ static void __init imx6q_sabrelite_init(void) imx6q_sabrelite_cko1_setup(); } +static void __init imx6q_sabresd_cko1_setup(void) +{ + struct clk *cko1_sel, *pll4, *pll4_post, *cko1; + unsigned long rate; + + cko1_sel = clk_get_sys(NULL, "cko1_sel"); + pll4 = clk_get_sys(NULL, "pll4_audio"); + pll4_post = clk_get_sys(NULL, "pll4_post_div"); + cko1 = clk_get_sys(NULL, "cko1"); + if (IS_ERR(cko1_sel) || IS_ERR(pll4) + || IS_ERR(pll4_post) || IS_ERR(cko1)) { + pr_err("cko1 setup failed!\n"); + goto put_clk; + } + /* + * Setting pll4 at 768MHz (24MHz * 32) + * So its child clock can get 24MHz easily + */ + clk_set_rate(pll4, 768000000); + + clk_set_parent(cko1_sel, pll4_post); + rate = clk_round_rate(cko1, 24000000); + clk_set_rate(cko1, rate); +put_clk: + if (!IS_ERR(cko1_sel)) + clk_put(cko1_sel); + if (!IS_ERR(pll4_post)) + clk_put(pll4_post); + if (!IS_ERR(pll4)) + clk_put(pll4); + if (!IS_ERR(cko1)) + clk_put(cko1); +} + +static void __init imx6q_sabresd_init(void) +{ + imx6q_sabresd_cko1_setup(); +} + static void __init imx6q_1588_init(void) { struct regmap *gpr; @@ -165,6 +205,9 @@ static void __init imx6q_init_machine(void) { if (of_machine_is_compatible("fsl,imx6q-sabrelite")) imx6q_sabrelite_init(); + else if (of_machine_is_compatible("fsl,imx6q-sabresd") || + of_machine_is_compatible("fsl,imx6dl-sabresd")) + imx6q_sabresd_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -253,10 +296,44 @@ static void __init imx6q_map_io(void) imx_scu_map_io(); } +#ifdef CONFIG_CACHE_L2X0 +static void __init imx6q_init_l2cache(void) +{ + void __iomem *l2x0_base; + struct device_node *np; + unsigned int val; + + np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); + if (!np) + goto out; + + l2x0_base = of_iomap(np, 0); + if (!l2x0_base) { + of_node_put(np); + goto out; + } + + /* Configure the L2 PREFETCH and POWER registers */ + val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); + val |= 0x70800000; + writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); + val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; + writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); + + iounmap(l2x0_base); + of_node_put(np); + +out: + l2x0_of_init(0, ~0UL); +} +#else +static inline void imx6q_init_l2cache(void) {} +#endif + static void __init imx6q_init_irq(void) { imx6q_init_revision(); - l2x0_of_init(0, ~0UL); + imx6q_init_l2cache(); imx_src_init(); imx_gpc_init(); irqchip_init(); @@ -264,7 +341,7 @@ static void __init imx6q_init_irq(void) static void __init imx6q_timer_init(void) { - mx6q_clocks_init(); + of_clk_init(NULL); clocksource_of_init(); imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", imx6q_revision()); diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c new file mode 100644 index 00000000000..132db260950 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -0,0 +1,52 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/clk-provider.h> +#include <linux/irqchip.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +static void __init imx6sl_init_machine(void) +{ + mxc_arch_reset_init_dt(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void __init imx6sl_init_irq(void) +{ + l2x0_of_init(0, ~0UL); + imx_src_init(); + imx_gpc_init(); + irqchip_init(); +} + +static void __init imx6sl_timer_init(void) +{ + of_clk_init(NULL); +} + +static const char *imx6sl_dt_compat[] __initdata = { + "fsl,imx6sl", + NULL, +}; + +DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)") + .map_io = debug_ll_io_init, + .init_irq = imx6sl_init_irq, + .init_time = imx6sl_timer_init, + .init_machine = imx6sl_init_machine, + .dt_compat = imx6sl_dt_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index b8b15bb1ffd..19bb6441a7d 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -398,8 +398,8 @@ static void __init pca100_init(void) imx27_add_fsl_usb2_udc(&otg_device_pdata); } - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + usbh2_pdata.otg = imx_otg_ulpi_create( + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); if (usbh2_pdata.otg) imx27_add_mxc_ehci_hs(2, &usbh2_pdata); diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c new file mode 100644 index 00000000000..816991deb9b --- /dev/null +++ b/arch/arm/mach-imx/mach-vf610.c @@ -0,0 +1,48 @@ +/* + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/of_platform.h> +#include <linux/clocksource.h> +#include <linux/irqchip.h> +#include <linux/clk-provider.h> +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> + +#include "common.h" + +static void __init vf610_init_machine(void) +{ + mxc_arch_reset_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void __init vf610_init_irq(void) +{ + l2x0_of_init(0, ~0UL); + irqchip_init(); +} + +static void __init vf610_init_time(void) +{ + of_clk_init(NULL); + clocksource_of_init(); +} + +static const char *vf610_dt_compat[] __initdata = { + "fsl,vf610", + NULL, +}; + +DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)") + .init_irq = vf610_init_irq, + .init_time = vf610_init_time, + .init_machine = vf610_init_machine, + .dt_compat = vf610_dt_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 3c609c52d3e..e065fedb3ad 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -39,7 +39,6 @@ void __init mx1_map_io(void) void __init imx1_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX1); - mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), MX1_NUM_GPIO_PORT); } @@ -51,6 +50,7 @@ void __init mx1_init_irq(void) void __init imx1_soc_init(void) { + mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); mxc_device_init(); mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index d8ccd3a8ec5..2e91ab2ca37 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -66,7 +66,6 @@ void __init mx21_map_io(void) void __init imx21_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX21); - mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR)); imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR), MX21_NUM_GPIO_PORT); } @@ -82,6 +81,7 @@ static const struct resource imx21_audmux_res[] __initconst = { void __init imx21_soc_init(void) { + mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR)); mxc_device_init(); mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 9357707bb7a..e065c117f5a 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -54,7 +54,6 @@ void __init imx25_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX25); mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); } void __init mx25_init_irq(void) @@ -89,6 +88,7 @@ static const struct resource imx25_audmux_res[] __initconst = { void __init imx25_soc_init(void) { + mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); mxc_device_init(); /* i.mx25 has the i.mx35 type gpio */ diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 4f1be65a7b5..7d82a5a5b16 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -66,7 +66,6 @@ void __init mx27_map_io(void) void __init imx27_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX27); - mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR), MX27_NUM_GPIO_PORT); } @@ -82,6 +81,7 @@ static const struct resource imx27_audmux_res[] __initconst = { void __init imx27_soc_init(void) { + mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); mxc_device_init(); /* i.mx27 has the i.mx21 type gpio */ diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index e0e69a68217..8f0f60697f5 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -138,7 +138,6 @@ void __init mx31_map_io(void) void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); - mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); arch_ioremap_caller = imx3_ioremap_caller; arm_pm_idle = imx3_idle; mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR); @@ -174,6 +173,7 @@ void __init imx31_soc_init(void) imx3_init_l2x0(); + mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); mxc_device_init(); mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); @@ -216,7 +216,6 @@ void __init imx35_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); arm_pm_idle = imx3_idle; arch_ioremap_caller = imx3_ioremap_caller; mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR); @@ -272,6 +271,7 @@ void __init imx35_soc_init(void) imx3_init_l2x0(); + mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); mxc_device_init(); mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index b7c4e70e508..cf193d87274 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -83,7 +83,6 @@ void __init imx51_init_early(void) imx51_ipu_mipi_setup(); mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); imx_src_init(); } @@ -91,7 +90,6 @@ void __init imx53_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX53); mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); imx_src_init(); } @@ -129,6 +127,7 @@ static const struct resource imx51_audmux_res[] __initconst = { void __init imx51_soc_init(void) { + mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); mxc_device_init(); /* i.mx51 has the i.mx35 type gpio */ diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 695e0d73bf8..7cdc79a9657 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -21,6 +21,8 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/system_misc.h> #include <asm/proc-fns.h> @@ -30,6 +32,7 @@ #include "hardware.h" static void __iomem *wdog_base; +static struct clk *wdog_clk; /* * Reset the system. It is called by machine_restart(). @@ -38,16 +41,13 @@ void mxc_restart(char mode, const char *cmd) { unsigned int wcr_enable; - if (cpu_is_mx1()) { - wcr_enable = (1 << 0); - } else { - struct clk *clk; + if (wdog_clk) + clk_enable(wdog_clk); - clk = clk_get_sys("imx2-wdt.0", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); + if (cpu_is_mx1()) + wcr_enable = (1 << 0); + else wcr_enable = (1 << 2); - } /* Assert SRS signal */ __raw_writew(wcr_enable, wdog_base); @@ -55,7 +55,7 @@ void mxc_restart(char mode, const char *cmd) /* wait for reset to assert... */ mdelay(500); - printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + pr_err("%s: Watchdog reset failed to assert reset\n", __func__); /* delay to allow the serial port to show the message */ mdelay(50); @@ -64,7 +64,34 @@ void mxc_restart(char mode, const char *cmd) soft_restart(0); } -void mxc_arch_reset_init(void __iomem *base) +void __init mxc_arch_reset_init(void __iomem *base) { wdog_base = base; + + wdog_clk = clk_get_sys("imx2-wdt.0", NULL); + if (IS_ERR(wdog_clk)) { + pr_warn("%s: failed to get wdog clock\n", __func__); + wdog_clk = NULL; + return; + } + + clk_prepare(wdog_clk); +} + +void __init mxc_arch_reset_init_dt(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx21-wdt"); + wdog_base = of_iomap(np, 0); + WARN_ON(!wdog_base); + + wdog_clk = of_clk_get(np, 0); + if (IS_ERR(wdog_clk)) { + pr_warn("%s: failed to get wdog clock\n", __func__); + wdog_clk = NULL; + return; + } + + clk_prepare(wdog_clk); } diff --git a/arch/arm/mach-imx/ulpi.c b/arch/arm/mach-imx/ulpi.c deleted file mode 100644 index 0f051957d10..00000000000 --- a/arch/arm/mach-imx/ulpi.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> - * Copyright 2009 Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include "ulpi.h" - -/* ULPIVIEW register bits */ -#define ULPIVW_WU (1 << 31) /* Wakeup */ -#define ULPIVW_RUN (1 << 30) /* read/write run */ -#define ULPIVW_WRITE (1 << 29) /* 0 = read 1 = write */ -#define ULPIVW_SS (1 << 27) /* SyncState */ -#define ULPIVW_PORT_MASK 0x07 /* Port field */ -#define ULPIVW_PORT_SHIFT 24 -#define ULPIVW_ADDR_MASK 0xff /* data address field */ -#define ULPIVW_ADDR_SHIFT 16 -#define ULPIVW_RDATA_MASK 0xff /* read data field */ -#define ULPIVW_RDATA_SHIFT 8 -#define ULPIVW_WDATA_MASK 0xff /* write data field */ -#define ULPIVW_WDATA_SHIFT 0 - -static int ulpi_poll(void __iomem *view, u32 bit) -{ - int timeout = 10000; - - while (timeout--) { - u32 data = __raw_readl(view); - - if (!(data & bit)) - return 0; - - cpu_relax(); - }; - - printk(KERN_WARNING "timeout polling for ULPI device\n"); - - return -ETIMEDOUT; -} - -static int ulpi_read(struct usb_phy *otg, u32 reg) -{ - int ret; - void __iomem *view = otg->io_priv; - - /* make sure interface is running */ - if (!(__raw_readl(view) & ULPIVW_SS)) { - __raw_writel(ULPIVW_WU, view); - - /* wait for wakeup */ - ret = ulpi_poll(view, ULPIVW_WU); - if (ret) - return ret; - } - - /* read the register */ - __raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view); - - /* wait for completion */ - ret = ulpi_poll(view, ULPIVW_RUN); - if (ret) - return ret; - - return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK; -} - -static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg) -{ - int ret; - void __iomem *view = otg->io_priv; - - /* make sure the interface is running */ - if (!(__raw_readl(view) & ULPIVW_SS)) { - __raw_writel(ULPIVW_WU, view); - /* wait for wakeup */ - ret = ulpi_poll(view, ULPIVW_WU); - if (ret) - return ret; - } - - __raw_writel((ULPIVW_RUN | ULPIVW_WRITE | - (reg << ULPIVW_ADDR_SHIFT) | - ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view); - - /* wait for completion */ - return ulpi_poll(view, ULPIVW_RUN); -} - -struct usb_phy_io_ops mxc_ulpi_access_ops = { - .read = ulpi_read, - .write = ulpi_write, -}; -EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops); - -struct usb_phy *imx_otg_ulpi_create(unsigned int flags) -{ - return otg_ulpi_create(&mxc_ulpi_access_ops, flags); -} diff --git a/arch/arm/mach-imx/ulpi.h b/arch/arm/mach-imx/ulpi.h index 42bdaca6d7d..23f5c0349e8 100644 --- a/arch/arm/mach-imx/ulpi.h +++ b/arch/arm/mach-imx/ulpi.h @@ -1,8 +1,13 @@ #ifndef __MACH_ULPI_H #define __MACH_ULPI_H -#ifdef CONFIG_USB_ULPI -struct usb_phy *imx_otg_ulpi_create(unsigned int flags); +#include <linux/usb/ulpi.h> + +#ifdef CONFIG_USB_ULPI_VIEWPORT +static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) +{ + return otg_ulpi_create(&ulpi_viewport_access_ops, flags); +} #else static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) { @@ -10,7 +15,5 @@ static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) } #endif -extern struct usb_phy_io_ops mxc_ulpi_access_ops; - #endif /* __MACH_ULPI_H */ diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index d14d6b76f4c..ec759ded7b6 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -8,5 +8,5 @@ obj-y := core.o lm.o leds.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o -obj-$(CONFIG_PCI) += pci_v3.o pci.o +obj-$(CONFIG_PCI) += pci_v3.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index be5859efe10..306d025d973 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -305,29 +305,6 @@ /* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */ /* ------------------------------------------------------------------------ - * Where in the memory map does PCI live? - * ------------------------------------------------------------------------ - * This represents a fairly liberal usage of address space. Even though - * the V3 only has two windows (therefore we need to map stuff on the fly), - * we maintain the same addresses, even if they're not mapped. - * - */ -#define PHYS_PCI_MEM_BASE 0x40000000 /* 512M to xxx */ -/* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? - */ -#define PHYS_PCI_IO_BASE 0x60000000 /* 16M to xxx */ -/* unused (128-16)M from B1000000-B7FFFFFF - */ -#define PHYS_PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */ -/* unused ((128-16)M - 64K) from XXX - */ -#define PHYS_PCI_V3_BASE 0x62000000 - -#define PCI_MEMORY_VADDR IOMEM(0xe8000000) -#define PCI_CONFIG_VADDR IOMEM(0xec000000) -#define PCI_V3_VADDR IOMEM(0xed000000) - -/* ------------------------------------------------------------------------ * Integrator Interrupt Controllers * ------------------------------------------------------------------------ * diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index b23c8e4f28e..a5b15c4e8de 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -41,7 +41,6 @@ #include <linux/stat.h> #include <linux/sys_soc.h> #include <linux/termios.h> -#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -57,10 +56,10 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <asm/mach/pci.h> #include <asm/mach/time.h> #include "common.h" +#include "pci_v3.h" /* Base address to the AP system controller */ void __iomem *ap_syscon_base; @@ -78,10 +77,6 @@ void __iomem *ap_syscon_base; /* * Logical Physical - * e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M) - * ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M) - * ed000000 62000000 PCI V3 regs PHYS_PCI_V3_BASE (max 64k) - * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M) * ef000000 Cache flush * f1000000 10000000 Core module registers * f1100000 11000000 System controller registers @@ -130,29 +125,13 @@ static struct map_desc ap_io_desc[] __initdata __maybe_unused = { .pfn = __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE), .length = SZ_4K, .type = MT_DEVICE - }, { - .virtual = (unsigned long)PCI_MEMORY_VADDR, - .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE), - .length = SZ_16M, - .type = MT_DEVICE - }, { - .virtual = (unsigned long)PCI_CONFIG_VADDR, - .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE), - .length = SZ_16M, - .type = MT_DEVICE - }, { - .virtual = (unsigned long)PCI_V3_VADDR, - .pfn = __phys_to_pfn(PHYS_PCI_V3_BASE), - .length = SZ_64K, - .type = MT_DEVICE } }; static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); - vga_base = (unsigned long)PCI_MEMORY_VADDR; - pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE)); + pci_v3_early_init(); } #ifdef CONFIG_PM @@ -615,6 +594,11 @@ static void __init ap_map_io_atag(void) * for eventual deletion. */ +static struct platform_device pci_v3_device = { + .name = "pci-v3", + .id = 0, +}; + static struct resource cfi_flash_resource = { .start = INTEGRATOR_FLASH_BASE, .end = INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1, @@ -672,6 +656,7 @@ static void __init ap_init(void) unsigned long sc_dec; int i; + platform_device_register(&pci_v3_device); platform_device_register(&cfi_flash_device); ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); diff --git a/arch/arm/mach-integrator/pci.c b/arch/arm/mach-integrator/pci.c deleted file mode 100644 index 6c1667e728f..00000000000 --- a/arch/arm/mach-integrator/pci.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * linux/arch/arm/mach-integrator/pci-integrator.c - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * PCI functions for Integrator - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/init.h> - -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -#include <mach/irqs.h> - -/* - * A small note about bridges and interrupts. The DECchip 21050 (and - * later) adheres to the PCI-PCI bridge specification. This says that - * the interrupts on the other side of a bridge are swizzled in the - * following manner: - * - * Dev Interrupt Interrupt - * Pin on Pin on - * Device Connector - * - * 4 A A - * B B - * C C - * D D - * - * 5 A B - * B C - * C D - * D A - * - * 6 A C - * B D - * C A - * D B - * - * 7 A D - * B A - * C B - * D C - * - * Where A = pin 1, B = pin 2 and so on and pin=0 = default = A. - * Thus, each swizzle is ((pin-1) + (device#-4)) % 4 - */ - -/* - * This routine handles multiple bridges. - */ -static u8 __init integrator_swizzle(struct pci_dev *dev, u8 *pinp) -{ - if (*pinp == 0) - *pinp = 1; - - return pci_common_swizzle(dev, pinp); -} - -static int irq_tab[4] __initdata = { - IRQ_AP_PCIINT0, IRQ_AP_PCIINT1, IRQ_AP_PCIINT2, IRQ_AP_PCIINT3 -}; - -/* - * map the specified device/slot/pin to an IRQ. This works out such - * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. - */ -static int __init integrator_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int intnr = ((slot - 9) + (pin - 1)) & 3; - - return irq_tab[intnr]; -} - -extern void pci_v3_init(void *); - -static struct hw_pci integrator_pci __initdata = { - .swizzle = integrator_swizzle, - .map_irq = integrator_map_irq, - .setup = pci_v3_setup, - .nr_controllers = 1, - .ops = &pci_v3_ops, - .preinit = pci_v3_preinit, - .postinit = pci_v3_postinit, -}; - -static int __init integrator_pci_init(void) -{ - if (machine_is_integrator()) - pci_common_init(&integrator_pci); - return 0; -} - -subsys_initcall(integrator_pci_init); diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index e7fcea7f330..bef100527c4 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -27,16 +27,199 @@ #include <linux/spinlock.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_pci.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> #include <mach/irqs.h> +#include <asm/mach/map.h> #include <asm/signal.h> #include <asm/mach/pci.h> #include <asm/irq_regs.h> -#include <asm/hardware/pci_v3.h> +#include "pci_v3.h" + +/* + * Where in the memory map does PCI live? + * + * This represents a fairly liberal usage of address space. Even though + * the V3 only has two windows (therefore we need to map stuff on the fly), + * we maintain the same addresses, even if they're not mapped. + */ +#define PHYS_PCI_MEM_BASE 0x40000000 /* 256M */ +#define PHYS_PCI_PRE_BASE 0x50000000 /* 256M */ +#define PHYS_PCI_IO_BASE 0x60000000 /* 16M */ +#define PHYS_PCI_CONFIG_BASE 0x61000000 /* 16M */ +#define PHYS_PCI_V3_BASE 0x62000000 /* 64K */ + +#define PCI_MEMORY_VADDR IOMEM(0xe8000000) +#define PCI_CONFIG_VADDR IOMEM(0xec000000) + +/* + * V3 Local Bus to PCI Bridge definitions + * + * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04 + * All V3 register names are prefaced by V3_ to avoid clashing with any other + * PCI definitions. Their names match the user's manual. + * + * I'm assuming that I20 is disabled. + * + */ +#define V3_PCI_VENDOR 0x00000000 +#define V3_PCI_DEVICE 0x00000002 +#define V3_PCI_CMD 0x00000004 +#define V3_PCI_STAT 0x00000006 +#define V3_PCI_CC_REV 0x00000008 +#define V3_PCI_HDR_CFG 0x0000000C +#define V3_PCI_IO_BASE 0x00000010 +#define V3_PCI_BASE0 0x00000014 +#define V3_PCI_BASE1 0x00000018 +#define V3_PCI_SUB_VENDOR 0x0000002C +#define V3_PCI_SUB_ID 0x0000002E +#define V3_PCI_ROM 0x00000030 +#define V3_PCI_BPARAM 0x0000003C +#define V3_PCI_MAP0 0x00000040 +#define V3_PCI_MAP1 0x00000044 +#define V3_PCI_INT_STAT 0x00000048 +#define V3_PCI_INT_CFG 0x0000004C +#define V3_LB_BASE0 0x00000054 +#define V3_LB_BASE1 0x00000058 +#define V3_LB_MAP0 0x0000005E +#define V3_LB_MAP1 0x00000062 +#define V3_LB_BASE2 0x00000064 +#define V3_LB_MAP2 0x00000066 +#define V3_LB_SIZE 0x00000068 +#define V3_LB_IO_BASE 0x0000006E +#define V3_FIFO_CFG 0x00000070 +#define V3_FIFO_PRIORITY 0x00000072 +#define V3_FIFO_STAT 0x00000074 +#define V3_LB_ISTAT 0x00000076 +#define V3_LB_IMASK 0x00000077 +#define V3_SYSTEM 0x00000078 +#define V3_LB_CFG 0x0000007A +#define V3_PCI_CFG 0x0000007C +#define V3_DMA_PCI_ADR0 0x00000080 +#define V3_DMA_PCI_ADR1 0x00000090 +#define V3_DMA_LOCAL_ADR0 0x00000084 +#define V3_DMA_LOCAL_ADR1 0x00000094 +#define V3_DMA_LENGTH0 0x00000088 +#define V3_DMA_LENGTH1 0x00000098 +#define V3_DMA_CSR0 0x0000008B +#define V3_DMA_CSR1 0x0000009B +#define V3_DMA_CTLB_ADR0 0x0000008C +#define V3_DMA_CTLB_ADR1 0x0000009C +#define V3_DMA_DELAY 0x000000E0 +#define V3_MAIL_DATA 0x000000C0 +#define V3_PCI_MAIL_IEWR 0x000000D0 +#define V3_PCI_MAIL_IERD 0x000000D2 +#define V3_LB_MAIL_IEWR 0x000000D4 +#define V3_LB_MAIL_IERD 0x000000D6 +#define V3_MAIL_WR_STAT 0x000000D8 +#define V3_MAIL_RD_STAT 0x000000DA +#define V3_QBA_MAP 0x000000DC + +/* PCI COMMAND REGISTER bits + */ +#define V3_COMMAND_M_FBB_EN (1 << 9) +#define V3_COMMAND_M_SERR_EN (1 << 8) +#define V3_COMMAND_M_PAR_EN (1 << 6) +#define V3_COMMAND_M_MASTER_EN (1 << 2) +#define V3_COMMAND_M_MEM_EN (1 << 1) +#define V3_COMMAND_M_IO_EN (1 << 0) + +/* SYSTEM REGISTER bits + */ +#define V3_SYSTEM_M_RST_OUT (1 << 15) +#define V3_SYSTEM_M_LOCK (1 << 14) + +/* PCI_CFG bits + */ +#define V3_PCI_CFG_M_I2O_EN (1 << 15) +#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14) +#define V3_PCI_CFG_M_IO_DIS (1 << 13) +#define V3_PCI_CFG_M_EN3V (1 << 12) +#define V3_PCI_CFG_M_RETRY_EN (1 << 10) +#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) +#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) + +/* PCI_BASE register bits (PCI -> Local Bus) + */ +#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000 +#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00 +#define V3_PCI_BASE_M_PREFETCH (1 << 3) +#define V3_PCI_BASE_M_TYPE (3 << 1) +#define V3_PCI_BASE_M_IO (1 << 0) + +/* PCI MAP register bits (PCI -> Local bus) + */ +#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 +#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) +#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) +#define V3_PCI_MAP_M_SWAP (3 << 8) +#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 +#define V3_PCI_MAP_M_REG_EN (1 << 1) +#define V3_PCI_MAP_M_ENABLE (1 << 0) + +/* + * LB_BASE0,1 register bits (Local bus -> PCI) + */ +#define V3_LB_BASE_ADR_BASE 0xfff00000 +#define V3_LB_BASE_SWAP (3 << 8) +#define V3_LB_BASE_ADR_SIZE (15 << 4) +#define V3_LB_BASE_PREFETCH (1 << 3) +#define V3_LB_BASE_ENABLE (1 << 0) + +#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) +#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) +#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) +#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) +#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) +#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) +#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) +#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) +#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) +#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) +#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) +#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) + +#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) + +/* + * LB_MAP0,1 register bits (Local bus -> PCI) + */ +#define V3_LB_MAP_MAP_ADR 0xfff0 +#define V3_LB_MAP_TYPE (7 << 1) +#define V3_LB_MAP_AD_LOW_EN (1 << 0) + +#define V3_LB_MAP_TYPE_IACK (0 << 1) +#define V3_LB_MAP_TYPE_IO (1 << 1) +#define V3_LB_MAP_TYPE_MEM (3 << 1) +#define V3_LB_MAP_TYPE_CONFIG (5 << 1) +#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) + +#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) + +/* + * LB_BASE2 register bits (Local bus -> PCI IO) + */ +#define V3_LB_BASE2_ADR_BASE 0xff00 +#define V3_LB_BASE2_SWAP (3 << 6) +#define V3_LB_BASE2_ENABLE (1 << 0) + +#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) + +/* + * LB_MAP2 register bits (Local bus -> PCI IO) + */ +#define V3_LB_MAP2_MAP_ADR 0xff00 + +#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) /* * The V3 PCI interface chip in Integrator provides several windows from @@ -101,15 +284,28 @@ * the mappings into PCI memory. */ +/* Filled in by probe */ +static void __iomem *pci_v3_base; +/* CPU side memory ranges */ +static struct resource conf_mem; /* FIXME: remap this instead of static map */ +static struct resource io_mem; +static struct resource non_mem; +static struct resource pre_mem; +/* PCI side memory ranges */ +static u64 non_mem_pci; +static u64 non_mem_pci_sz; +static u64 pre_mem_pci; +static u64 pre_mem_pci_sz; + // V3 access routines -#define v3_writeb(o,v) __raw_writeb(v, PCI_V3_VADDR + (unsigned int)(o)) -#define v3_readb(o) (__raw_readb(PCI_V3_VADDR + (unsigned int)(o))) +#define v3_writeb(o,v) __raw_writeb(v, pci_v3_base + (unsigned int)(o)) +#define v3_readb(o) (__raw_readb(pci_v3_base + (unsigned int)(o))) -#define v3_writew(o,v) __raw_writew(v, PCI_V3_VADDR + (unsigned int)(o)) -#define v3_readw(o) (__raw_readw(PCI_V3_VADDR + (unsigned int)(o))) +#define v3_writew(o,v) __raw_writew(v, pci_v3_base + (unsigned int)(o)) +#define v3_readw(o) (__raw_readw(pci_v3_base + (unsigned int)(o))) -#define v3_writel(o,v) __raw_writel(v, PCI_V3_VADDR + (unsigned int)(o)) -#define v3_readl(o) (__raw_readl(PCI_V3_VADDR + (unsigned int)(o))) +#define v3_writel(o,v) __raw_writel(v, pci_v3_base + (unsigned int)(o)) +#define v3_readl(o) (__raw_readl(pci_v3_base + (unsigned int)(o))) /*============================================================================ * @@ -165,19 +361,6 @@ */ static DEFINE_RAW_SPINLOCK(v3_lock); -#define PCI_BUS_NONMEM_START 0x00000000 -#define PCI_BUS_NONMEM_SIZE SZ_256M - -#define PCI_BUS_PREMEM_START PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE -#define PCI_BUS_PREMEM_SIZE SZ_256M - -#if PCI_BUS_NONMEM_START & 0x000fffff -#error PCI_BUS_NONMEM_START must be megabyte aligned -#endif -#if PCI_BUS_PREMEM_START & 0x000fffff -#error PCI_BUS_PREMEM_START must be megabyte aligned -#endif - #undef V3_LB_BASE_PREFETCH #define V3_LB_BASE_PREFETCH 0 @@ -243,13 +426,13 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus, * prefetchable), this frees up base1 for re-use by * configuration memory */ - v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | + v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) | V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE); /* * Set up base1/map1 to point into configuration space. */ - v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_CONFIG_BASE) | + v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(conf_mem.start) | V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE); v3_writew(V3_LB_MAP1, mapaddress); @@ -261,16 +444,16 @@ static void v3_close_config_window(void) /* * Reassign base1 for use by prefetchable PCI memory */ - v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) | + v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) | V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH | V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) | + v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(pre_mem_pci) | V3_LB_MAP_TYPE_MEM_MULTIPLE); /* * And shrink base0 back to a 256M window (NOTE: MAP0 already correct) */ - v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | + v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) | V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE); } @@ -337,25 +520,11 @@ static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, return PCIBIOS_SUCCESSFUL; } -struct pci_ops pci_v3_ops = { +static struct pci_ops pci_v3_ops = { .read = v3_read_config, .write = v3_write_config, }; -static struct resource non_mem = { - .name = "PCI non-prefetchable", - .start = PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START, - .end = PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct resource pre_mem = { - .name = "PCI prefetchable", - .start = PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START, - .end = PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START + PCI_BUS_PREMEM_SIZE - 1, - .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, -}; - static int __init pci_v3_setup_resources(struct pci_sys_data *sys) { if (request_resource(&iomem_resource, &non_mem)) { @@ -471,7 +640,7 @@ static irqreturn_t v3_irq(int dummy, void *devid) return IRQ_HANDLED; } -int __init pci_v3_setup(int nr, struct pci_sys_data *sys) +static int __init pci_v3_setup(int nr, struct pci_sys_data *sys) { int ret = 0; @@ -479,7 +648,7 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) return -EINVAL; if (nr == 0) { - sys->mem_offset = PHYS_PCI_MEM_BASE; + sys->mem_offset = non_mem.start; ret = pci_v3_setup_resources(sys); } @@ -490,18 +659,10 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) * V3_LB_BASE? - local bus address * V3_LB_MAP? - pci bus address */ -void __init pci_v3_preinit(void) +static void __init pci_v3_preinit(void) { unsigned long flags; unsigned int temp; - int ret; - - /* Remap the Integrator system controller */ - ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); - if (!ap_syscon_base) { - pr_err("unable to remap the AP syscon for PCIv3\n"); - return; - } pcibios_min_mem = 0x00100000; @@ -525,25 +686,25 @@ void __init pci_v3_preinit(void) * Setup window 0 - PCI non-prefetchable memory * Local: 0x40000000 Bus: 0x00000000 Size: 256MB */ - v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | + v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) | V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP0, v3_addr_to_lb_map(PCI_BUS_NONMEM_START) | + v3_writew(V3_LB_MAP0, v3_addr_to_lb_map(non_mem_pci) | V3_LB_MAP_TYPE_MEM); /* * Setup window 1 - PCI prefetchable memory * Local: 0x50000000 Bus: 0x10000000 Size: 256MB */ - v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) | + v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) | V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH | V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) | + v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(pre_mem_pci) | V3_LB_MAP_TYPE_MEM_MULTIPLE); /* * Setup window 2 - PCI IO */ - v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(PHYS_PCI_IO_BASE) | + v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) | V3_LB_BASE_ENABLE); v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0)); @@ -578,18 +739,10 @@ void __init pci_v3_preinit(void) v3_writeb(V3_LB_IMASK, 0x28); __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); - /* - * Grab the PCI error interrupt. - */ - ret = request_irq(IRQ_AP_V3INT, v3_irq, 0, "V3", NULL); - if (ret) - printk(KERN_ERR "PCI: unable to grab PCI error " - "interrupt: %d\n", ret); - raw_spin_unlock_irqrestore(&v3_lock, flags); } -void __init pci_v3_postinit(void) +static void __init pci_v3_postinit(void) { unsigned int pci_cmd; @@ -608,5 +761,284 @@ void __init pci_v3_postinit(void) "interrupt: %d\n", ret); #endif - register_isa_ports(PHYS_PCI_MEM_BASE, PHYS_PCI_IO_BASE, 0); + register_isa_ports(non_mem.start, io_mem.start, 0); +} + +/* + * A small note about bridges and interrupts. The DECchip 21050 (and + * later) adheres to the PCI-PCI bridge specification. This says that + * the interrupts on the other side of a bridge are swizzled in the + * following manner: + * + * Dev Interrupt Interrupt + * Pin on Pin on + * Device Connector + * + * 4 A A + * B B + * C C + * D D + * + * 5 A B + * B C + * C D + * D A + * + * 6 A C + * B D + * C A + * D B + * + * 7 A D + * B A + * C B + * D C + * + * Where A = pin 1, B = pin 2 and so on and pin=0 = default = A. + * Thus, each swizzle is ((pin-1) + (device#-4)) % 4 + */ + +/* + * This routine handles multiple bridges. + */ +static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp) +{ + if (*pinp == 0) + *pinp = 1; + + return pci_common_swizzle(dev, pinp); +} + +static int irq_tab[4] __initdata = { + IRQ_AP_PCIINT0, IRQ_AP_PCIINT1, IRQ_AP_PCIINT2, IRQ_AP_PCIINT3 +}; + +/* + * map the specified device/slot/pin to an IRQ. This works out such + * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. + */ +static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int intnr = ((slot - 9) + (pin - 1)) & 3; + + return irq_tab[intnr]; +} + +static struct hw_pci pci_v3 __initdata = { + .swizzle = pci_v3_swizzle, + .setup = pci_v3_setup, + .nr_controllers = 1, + .ops = &pci_v3_ops, + .preinit = pci_v3_preinit, + .postinit = pci_v3_postinit, +}; + +#ifdef CONFIG_OF + +static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct of_irq oirq; + int ret; + + ret = of_irq_map_pci(dev, &oirq); + if (ret) { + dev_err(&dev->dev, "of_irq_map_pci() %d\n", ret); + /* Proper return code 0 == NO_IRQ */ + return 0; + } + + return irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); +} + +static int __init pci_v3_dtprobe(struct platform_device *pdev, + struct device_node *np) +{ + struct of_pci_range_parser parser; + struct of_pci_range range; + struct resource *res; + int irq, ret; + + if (of_pci_range_parser_init(&parser, np)) + return -EINVAL; + + /* Get base for bridge registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "unable to obtain PCIv3 base\n"); + return -ENODEV; + } + pci_v3_base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!pci_v3_base) { + dev_err(&pdev->dev, "unable to remap PCIv3 base\n"); + return -ENODEV; + } + + /* Get and request error IRQ resource */ + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, "unable to obtain PCIv3 error IRQ\n"); + return -ENODEV; + } + ret = devm_request_irq(&pdev->dev, irq, v3_irq, 0, + "PCIv3 error", NULL); + if (ret < 0) { + dev_err(&pdev->dev, "unable to request PCIv3 error IRQ %d (%d)\n", irq, ret); + return ret; + } + + for_each_of_pci_range(&parser, &range) { + if (!range.flags) { + of_pci_range_to_resource(&range, np, &conf_mem); + conf_mem.name = "PCIv3 config"; + } + if (range.flags & IORESOURCE_IO) { + of_pci_range_to_resource(&range, np, &io_mem); + io_mem.name = "PCIv3 I/O"; + } + if ((range.flags & IORESOURCE_MEM) && + !(range.flags & IORESOURCE_PREFETCH)) { + non_mem_pci = range.pci_addr; + non_mem_pci_sz = range.size; + of_pci_range_to_resource(&range, np, &non_mem); + non_mem.name = "PCIv3 non-prefetched mem"; + } + if ((range.flags & IORESOURCE_MEM) && + (range.flags & IORESOURCE_PREFETCH)) { + pre_mem_pci = range.pci_addr; + pre_mem_pci_sz = range.size; + of_pci_range_to_resource(&range, np, &pre_mem); + pre_mem.name = "PCIv3 prefetched mem"; + } + } + + if (!conf_mem.start || !io_mem.start || + !non_mem.start || !pre_mem.start) { + dev_err(&pdev->dev, "missing ranges in device node\n"); + return -EINVAL; + } + + pci_v3.map_irq = pci_v3_map_irq_dt; + pci_common_init_dev(&pdev->dev, &pci_v3); + + return 0; +} + +#else + +static inline int pci_v3_dtprobe(struct platform_device *pdev, + struct device_node *np) +{ + return -EINVAL; +} + +#endif + +static int __init pci_v3_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) { + dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n"); + return -ENODEV; + } + + /* Device tree probe path */ + if (np) + return pci_v3_dtprobe(pdev, np); + + pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K); + if (!pci_v3_base) { + dev_err(&pdev->dev, "unable to remap PCIv3 base\n"); + return -ENODEV; + } + + ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL); + if (ret) { + dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n", + ret); + return -ENODEV; + } + + conf_mem.name = "PCIv3 config"; + conf_mem.start = PHYS_PCI_CONFIG_BASE; + conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1; + conf_mem.flags = IORESOURCE_MEM; + + io_mem.name = "PCIv3 I/O"; + io_mem.start = PHYS_PCI_IO_BASE; + io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1; + io_mem.flags = IORESOURCE_MEM; + + non_mem_pci = 0x00000000; + non_mem_pci_sz = SZ_256M; + non_mem.name = "PCIv3 non-prefetched mem"; + non_mem.start = PHYS_PCI_MEM_BASE; + non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1; + non_mem.flags = IORESOURCE_MEM; + + pre_mem_pci = 0x10000000; + pre_mem_pci_sz = SZ_256M; + pre_mem.name = "PCIv3 prefetched mem"; + pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M; + pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1; + pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; + + pci_v3.map_irq = pci_v3_map_irq; + + pci_common_init_dev(&pdev->dev, &pci_v3); + + return 0; +} + +static const struct of_device_id pci_ids[] = { + { .compatible = "v3,v360epc-pci", }, + {}, +}; + +static struct platform_driver pci_v3_driver = { + .driver = { + .name = "pci-v3", + .of_match_table = pci_ids, + }, +}; + +static int __init pci_v3_init(void) +{ + return platform_driver_probe(&pci_v3_driver, pci_v3_probe); +} + +subsys_initcall(pci_v3_init); + +/* + * Static mappings for the PCIv3 bridge + * + * e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M) + * ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M) + * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M) + */ +static struct map_desc pci_v3_io_desc[] __initdata __maybe_unused = { + { + .virtual = (unsigned long)PCI_MEMORY_VADDR, + .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = (unsigned long)PCI_CONFIG_VADDR, + .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE), + .length = SZ_16M, + .type = MT_DEVICE + } +}; + +int __init pci_v3_early_init(void) +{ + iotable_init(pci_v3_io_desc, ARRAY_SIZE(pci_v3_io_desc)); + vga_base = (unsigned long)PCI_MEMORY_VADDR; + pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE)); + return 0; } diff --git a/arch/arm/mach-integrator/pci_v3.h b/arch/arm/mach-integrator/pci_v3.h new file mode 100644 index 00000000000..755fd29fed4 --- /dev/null +++ b/arch/arm/mach-integrator/pci_v3.h @@ -0,0 +1,2 @@ +/* Simple oneliner include to the PCIv3 early init */ +extern int pci_v3_early_init(void); diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig new file mode 100644 index 00000000000..51a50e99684 --- /dev/null +++ b/arch/arm/mach-keystone/Kconfig @@ -0,0 +1,15 @@ +config ARCH_KEYSTONE + bool "Texas Instruments Keystone Devices" + depends on ARCH_MULTI_V7 + select CPU_V7 + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select HAVE_SMP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_ERRATA_798181 if SMP + help + Support for boards based on the Texas Instruments Keystone family of + SoCs. diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile new file mode 100644 index 00000000000..ddc52b05dc8 --- /dev/null +++ b/arch/arm/mach-keystone/Makefile @@ -0,0 +1,6 @@ +obj-y := keystone.o smc.o + +plus_sec := $(call as-instr,.arch_extension sec,+sec) +AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) + +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-keystone/Makefile.boot b/arch/arm/mach-keystone/Makefile.boot new file mode 100644 index 00000000000..f3835c43af6 --- /dev/null +++ b/arch/arm/mach-keystone/Makefile.boot @@ -0,0 +1 @@ +zreladdr-y := 0x80008000 diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c new file mode 100644 index 00000000000..fe4d9ff93a7 --- /dev/null +++ b/arch/arm/mach-keystone/keystone.c @@ -0,0 +1,75 @@ +/* + * Keystone2 based boards and SOC related code. + * + * Copyright 2013 Texas Instruments, Inc. + * Cyril Chemparathy <cyril@ti.com> + * Santosh Shilimkar <santosh.shillimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/of.h> +#include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> + +#include <asm/setup.h> +#include <asm/mach/map.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/smp_plat.h> + +#include "keystone.h" + +#define PLL_RESET_WRITE_KEY_MASK 0xffff0000 +#define PLL_RESET_WRITE_KEY 0x5a69 +#define PLL_RESET BIT(16) + +static void __iomem *keystone_rstctrl; + +static void __init keystone_init(void) +{ + struct device_node *node; + + node = of_find_compatible_node(NULL, NULL, "ti,keystone-reset"); + if (WARN_ON(!node)) + pr_warn("ti,keystone-reset node undefined\n"); + + keystone_rstctrl = of_iomap(node, 0); + if (WARN_ON(!keystone_rstctrl)) + pr_warn("ti,keystone-reset iomap error\n"); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *keystone_match[] __initconst = { + "ti,keystone-evm", + NULL, +}; + +void keystone_restart(char mode, const char *cmd) +{ + u32 val; + + BUG_ON(!keystone_rstctrl); + + /* Enable write access to RSTCTRL */ + val = readl(keystone_rstctrl); + val &= PLL_RESET_WRITE_KEY_MASK; + val |= PLL_RESET_WRITE_KEY; + writel(val, keystone_rstctrl); + + /* Reset the SOC */ + val = readl(keystone_rstctrl); + val &= ~PLL_RESET; + writel(val, keystone_rstctrl); +} + +DT_MACHINE_START(KEYSTONE, "Keystone") + .smp = smp_ops(keystone_smp_ops), + .init_machine = keystone_init, + .dt_compat = keystone_match, + .restart = keystone_restart, +MACHINE_END diff --git a/arch/arm/mach-keystone/keystone.h b/arch/arm/mach-keystone/keystone.h new file mode 100644 index 00000000000..60bef9dedb1 --- /dev/null +++ b/arch/arm/mach-keystone/keystone.h @@ -0,0 +1,23 @@ +/* + * Copyright 2013 Texas Instruments, Inc. + * Cyril Chemparathy <cyril@ti.com> + * Santosh Shilimkar <santosh.shillimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#ifndef __KEYSTONE_H__ +#define __KEYSTONE_H__ + +#define KEYSTONE_MON_CPU_UP_IDX 0x00 + +#ifndef __ASSEMBLER__ + +extern struct smp_operations keystone_smp_ops; +extern void secondary_startup(void); +extern u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr); + +#endif /* __ASSEMBLER__ */ +#endif /* __KEYSTONE_H__ */ diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c new file mode 100644 index 00000000000..1d4181e1daf --- /dev/null +++ b/arch/arm/mach-keystone/platsmp.c @@ -0,0 +1,43 @@ +/* + * Keystone SOC SMP platform code + * + * Copyright 2013 Texas Instruments, Inc. + * Cyril Chemparathy <cyril@ti.com> + * Santosh Shilimkar <santosh.shillimkar@ti.com> + * + * Based on platsmp.c, Copyright (C) 2002 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/io.h> + +#include <asm/smp_plat.h> +#include <asm/prom.h> + +#include "keystone.h" + +static int __cpuinit keystone_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + unsigned long start = virt_to_phys(&secondary_startup); + int error; + + pr_debug("keystone-smp: booting cpu %d, vector %08lx\n", + cpu, start); + + error = keystone_cpu_smc(KEYSTONE_MON_CPU_UP_IDX, cpu, start); + if (error) + pr_err("CPU %d bringup failed with %d\n", cpu, error); + + return error; +} + +struct smp_operations keystone_smp_ops __initdata = { + .smp_init_cpus = arm_dt_init_cpu_maps, + .smp_boot_secondary = keystone_smp_boot_secondary, +}; diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S new file mode 100644 index 00000000000..9b9e4f7b241 --- /dev/null +++ b/arch/arm/mach-keystone/smc.S @@ -0,0 +1,29 @@ +/* + * Keystone Secure APIs + * + * Copyright (C) 2013 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + +/** + * u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr) + * + * Low level CPU monitor API + * @command: Monitor command. + * @cpu: CPU Number + * @addr: Kernel jump address for boot CPU + * + * Return: Non zero value on failure + */ +ENTRY(keystone_cpu_smc) + stmfd sp!, {r4-r12, lr} + smc #0 + dsb + ldmfd sp!, {r4-r12, pc} +ENDPROC(keystone_cpu_smc) diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 7509a89af96..e610e137aa3 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -8,12 +8,6 @@ config MACH_D2NET_V2 Say 'Y' here if you want your kernel to support the LaCie d2 Network v2 NAS. -config MACH_DB88F6281_BP - bool "Marvell DB-88F6281-BP Development Board" - help - Say 'Y' here if you want your kernel to support the - Marvell DB-88F6281-BP Development Board. - config MACH_DOCKSTAR bool "Seagate FreeAgent DockStar" help @@ -134,13 +128,12 @@ comment "Device tree entries" config ARCH_KIRKWOOD_DT bool "Marvell Kirkwood Flattened Device Tree" + select KIRKWOOD_CLK select POWER_SUPPLY select POWER_RESET select POWER_RESET_GPIO select REGULATOR select REGULATOR_FIXED_VOLTAGE - select MVEBU_CLK_CORE - select MVEBU_CLK_GATING select USE_OF help Say 'Y' here if you want your kernel to support the @@ -153,6 +146,13 @@ config MACH_CLOUDBOX_DT Say 'Y' here if you want your kernel to support the LaCie CloudBox NAS, using Flattened Device Tree. +config MACH_DB88F628X_BP_DT + bool "Marvell DB-88F628x-BP Development Board (Flattened Device Tree)" + help + Say 'Y' here if you want your kernel to support the Marvell + DB-88F6281-BP and DB-88F6282-BP Development Board (Flattened + Device Tree). + config MACH_DLINK_KIRKWOOD_DT bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT @@ -272,14 +272,6 @@ config MACH_NETSPACE_V2_DT Say 'Y' here if you want your kernel to support the LaCie Network Space v2 NAS, using Flattened Device Tree. -config MACH_NSA310_DT - bool "ZyXEL NSA-310 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - select ARM_ATAG_DTB_COMPAT - help - Say 'Y' here if you want your kernel to support the - ZyXEL NSA-310 board (Flattened Device Tree). - config MACH_OPENBLOCKS_A6_DT bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" select ARCH_KIRKWOOD_DT diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index e1f3735d341..2fdc3a7ad22 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,7 +1,6 @@ obj-y += common.o irq.o pcie.o mpp.o obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o @@ -21,6 +20,7 @@ obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o +obj-$(CONFIG_MACH_DB88F628X_BP_DT) += board-db88f628x-bp.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o @@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o diff --git a/arch/arm/mach-kirkwood/board-db88f628x-bp.c b/arch/arm/mach-kirkwood/board-db88f628x-bp.c new file mode 100644 index 00000000000..2f574bc8ed4 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-db88f628x-bp.c @@ -0,0 +1,24 @@ +/* + * Saeed Bishara <saeed@marvell.com> + * + * Marvell DB-88F628{1,2}-BP Development Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/mv643xx_eth.h> +#include "common.h" + +static struct mv643xx_eth_platform_data db88f628x_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +void __init db88f628x_init(void) +{ + kirkwood_ge00_init(&db88f628x_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e9647b80cb5..cee5dc71cb6 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -15,7 +15,6 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/clk-provider.h> -#include <linux/clk/mvebu.h> #include <linux/kexec.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -25,11 +24,6 @@ #include <plat/common.h> #include "common.h" -static struct of_device_id kirkwood_dt_match_table[] __initdata = { - { .compatible = "simple-bus", }, - { } -}; - /* * There are still devices that doesn't know about DT yet. Get clock * gates here and add a clock lookup alias, so that old platform @@ -77,7 +71,7 @@ static void __init kirkwood_legacy_clk_init(void) static void __init kirkwood_of_clk_init(void) { - mvebu_clocks_init(); + of_clk_init(NULL); kirkwood_legacy_clk_init(); } @@ -97,6 +91,8 @@ static void __init kirkwood_dt_init(void) kirkwood_l2_init(); + kirkwood_cpufreq_init(); + /* Setup root of clk tree */ kirkwood_of_clk_init(); @@ -147,6 +143,10 @@ static void __init kirkwood_dt_init(void) of_machine_is_compatible("lacie,netspace_v2")) ns2_init(); + if (of_machine_is_compatible("marvell,db-88f6281-bp") || + of_machine_is_compatible("marvell,db-88f6282-bp")) + db88f628x_init(); + if (of_machine_is_compatible("mpl,cec4")) mplcec4_init(); @@ -159,7 +159,7 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("usi,topkick")) usi_topkick_init(); - of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const kirkwood_dt_board_compat[] = { @@ -181,6 +181,8 @@ static const char * const kirkwood_dt_board_compat[] = { "lacie,netspace_max_v2", "lacie,netspace_mini_v2", "lacie,netspace_v2", + "marvell,db-88f6281-bp", + "marvell,db-88f6282-bp", "mpl,cec4", "netgear,readynas-duo-v2", "plathome,openblocks-a6", diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index c8ebde4919e..98b5ad1bba9 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -22,11 +22,3 @@ void __init iconnect_init(void) { kirkwood_ge00_init(&iconnect_ge00_data); } - -static int __init iconnect_pci_init(void) -{ - if (of_machine_is_compatible("iom,iconnect")) - kirkwood_pcie_init(KW_PCIE0); - return 0; -} -subsys_initcall(iconnect_pci_init); diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c index 7d6dc669e17..938712e248f 100644 --- a/arch/arm/mach-kirkwood/board-mplcec4.c +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -29,7 +29,6 @@ void __init mplcec4_init(void) */ kirkwood_ge00_init(&mplcec4_ge00_data); kirkwood_ge01_init(&mplcec4_ge01_data); - kirkwood_pcie_init(KW_PCIE0); } diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c deleted file mode 100644 index 55ade93b93b..00000000000 --- a/arch/arm/mach-kirkwood/board-nsa310.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-kirkwood/nsa-310-setup.c - * - * ZyXEL NSA-310 Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <mach/kirkwood.h> -#include <linux/of.h> -#include "common.h" - -static int __init nsa310_pci_init(void) -{ - if (of_machine_is_compatible("zyxel,nsa310")) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} - -subsys_initcall(nsa310_pci_init); diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c index fb42c20e273..341b82d9cad 100644 --- a/arch/arm/mach-kirkwood/board-readynas.c +++ b/arch/arm/mach-kirkwood/board-readynas.c @@ -24,5 +24,4 @@ static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = { void __init netgear_readynas_init(void) { kirkwood_ge00_init(&netgear_readynas_ge00_data); - kirkwood_pcie_init(KW_PCIE0); } diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index f3892289756..7c72c725b71 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -598,6 +598,29 @@ void __init kirkwood_audio_init(void) } /***************************************************************************** + * CPU Frequency + ****************************************************************************/ +static struct resource kirkwood_cpufreq_resources[] = { + [0] = { + .start = CPU_CONTROL_PHYS, + .end = CPU_CONTROL_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_cpufreq_device = { + .name = "kirkwood-cpufreq", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), + .resource = kirkwood_cpufreq_resources, +}; + +void __init kirkwood_cpufreq_init(void) +{ + platform_device_register(&kirkwood_cpufreq_device); +} + +/***************************************************************************** * General ****************************************************************************/ /* @@ -648,30 +671,6 @@ char * __init kirkwood_id(void) void __init kirkwood_setup_wins(void) { - /* - * The PCIe windows will no longer be statically allocated - * here once Kirkwood is migrated to the pci-mvebu driver. - */ - mvebu_mbus_add_window_remap_flags("pcie0.0", - KIRKWOOD_PCIE_IO_PHYS_BASE, - KIRKWOOD_PCIE_IO_SIZE, - KIRKWOOD_PCIE_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie0.0", - KIRKWOOD_PCIE_MEM_PHYS_BASE, - KIRKWOOD_PCIE_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window_remap_flags("pcie1.0", - KIRKWOOD_PCIE1_IO_PHYS_BASE, - KIRKWOOD_PCIE1_IO_SIZE, - KIRKWOOD_PCIE1_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie1.0", - KIRKWOOD_PCIE1_MEM_PHYS_BASE, - KIRKWOOD_PCIE1_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE); mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE, diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 21da3b1ebd7..e2e19b302c2 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -51,6 +51,8 @@ void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *)); void kirkwood_audio_init(void); void kirkwood_cpuidle_init(void); +void kirkwood_cpufreq_init(void); + void kirkwood_restart(char, const char *); void kirkwood_clk_init(void); @@ -119,6 +121,12 @@ void km_kirkwood_init(void); static inline void km_kirkwood_init(void) {}; #endif +#ifdef CONFIG_MACH_DB88F628X_BP_DT +void db88f628x_init(void); +#else +static inline void db88f628x_init(void) {}; +#endif + #ifdef CONFIG_MACH_MPLCEC4_DT void mplcec4_init(void); #else diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c deleted file mode 100644 index 5a369fe7475..00000000000 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * arch/arm/mach-kirkwood/db88f6281-bp-setup.c - * - * Marvell DB-88F6281-BP Development Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sizes.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <linux/platform_data/mmc-mvsdio.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition db88f6281_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data db88f6281_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv_sata_platform_data db88f6281_sata_data = { - .n_ports = 2, -}; - -static struct mvsdio_platform_data db88f6281_mvsdio_data = { - .gpio_write_protect = 37, - .gpio_card_detect = 38, -}; - -static unsigned int db88f6281_mpp_config[] __initdata = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP37_GPIO, - MPP38_GPIO, - 0 -}; - -static void __init db88f6281_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(db88f6281_mpp_config); - - kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25); - kirkwood_ehci_init(); - kirkwood_ge00_init(&db88f6281_ge00_data); - kirkwood_sata_init(&db88f6281_sata_data); - kirkwood_uart0_init(); - kirkwood_sdio_init(&db88f6281_mvsdio_data); -} - -static int __init db88f6281_pci_init(void) -{ - if (machine_is_db88f6281_bp()) { - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - if (dev == MV88F6282_DEV_ID) - kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); - else - kirkwood_pcie_init(KW_PCIE0); - } - return 0; -} -subsys_initcall(db88f6281_pci_init); - -MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board") - /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .atag_offset = 0x100, - .init_machine = db88f6281_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 5c82b7dce4e..d4cbe5e81bb 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -17,6 +17,7 @@ #define CPU_CONFIG_ERROR_PROP 0x00000004 #define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) +#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104) #define CPU_RESET 0x00000002 #define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) @@ -69,6 +70,7 @@ #define CGC_RUNIT (1 << 7) #define CGC_XOR0 (1 << 8) #define CGC_AUDIO (1 << 9) +#define CGC_POWERSAVE (1 << 11) #define CGC_SATA0 (1 << 14) #define CGC_SATA1 (1 << 15) #define CGC_XOR1 (1 << 16) diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 7f43e6c2f8c..ddcb09f5bdd 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -12,6 +12,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/clk.h> +#include <linux/mbus.h> #include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> @@ -253,6 +254,27 @@ static void __init add_pcie_port(int index, void __iomem *base) void __init kirkwood_pcie_init(unsigned int portmask) { + mvebu_mbus_add_window_remap_flags("pcie0.0", + KIRKWOOD_PCIE_IO_PHYS_BASE, + KIRKWOOD_PCIE_IO_SIZE, + KIRKWOOD_PCIE_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie0.0", + KIRKWOOD_PCIE_MEM_PHYS_BASE, + KIRKWOOD_PCIE_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window_remap_flags("pcie1.0", + KIRKWOOD_PCIE1_IO_PHYS_BASE, + KIRKWOOD_PCIE1_IO_SIZE, + KIRKWOOD_PCIE1_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie1.0", + KIRKWOOD_PCIE1_MEM_PHYS_BASE, + KIRKWOOD_PCIE1_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE; if (portmask & KW_PCIE0) diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 80a8bcacd9d..9eb63d72460 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -10,12 +10,11 @@ config ARCH_MVEBU select PLAT_ORION select SPARSE_IRQ select CLKDEV_LOOKUP - select MVEBU_CLK_CORE - select MVEBU_CLK_CPU - select MVEBU_CLK_GATING select MVEBU_MBUS select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB + select MIGHT_HAVE_PCI + select PCI_QUIRKS if PCI if ARCH_MVEBU @@ -30,6 +29,7 @@ config MACH_ARMADA_370_XP config MACH_ARMADA_370 bool "Marvell Armada 370 boards" + select ARMADA_370_CLK select MACH_ARMADA_370_XP select PINCTRL_ARMADA_370 help @@ -38,6 +38,7 @@ config MACH_ARMADA_370 config MACH_ARMADA_XP bool "Marvell Armada XP boards" + select ARMADA_XP_CLK select MACH_ARMADA_370_XP select PINCTRL_ARMADA_XP help diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index cf8e357a0a0..97cbb802191 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -14,10 +14,11 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/io.h> #include <linux/time-armada-370-xp.h> -#include <linux/clk/mvebu.h> #include <linux/dma-mapping.h> #include <linux/mbus.h> #include <asm/hardware/cache-l2x0.h> @@ -28,45 +29,49 @@ #include "common.h" #include "coherency.h" -static struct map_desc armada_370_xp_io_desc[] __initdata = { - { - .virtual = (unsigned long) ARMADA_370_XP_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE), - .length = ARMADA_370_XP_REGS_SIZE, - .type = MT_DEVICE, - }, -}; - static void __init armada_370_xp_map_io(void) { - iotable_init(armada_370_xp_io_desc, ARRAY_SIZE(armada_370_xp_io_desc)); + debug_ll_io_init(); } -static void __init armada_370_xp_timer_and_clk_init(void) -{ - mvebu_clocks_init(); - armada_370_xp_timer_init(); -} +/* + * This initialization will be replaced by a DT-based + * initialization once the mvebu-mbus driver gains DT support. + */ -static void __init armada_370_xp_init_early(void) +#define ARMADA_370_XP_MBUS_WINS_OFFS 0x20000 +#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100 +#define ARMADA_370_XP_SDRAM_WINS_OFFS 0x20180 +#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20 + +static void __init armada_370_xp_mbus_init(void) { char *mbus_soc_name; + struct device_node *dn; + const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS); + const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS); - /* - * This initialization will be replaced by a DT-based - * initialization once the mvebu-mbus driver gains DT support. - */ if (of_machine_is_compatible("marvell,armada370")) mbus_soc_name = "marvell,armada370-mbus"; else mbus_soc_name = "marvell,armadaxp-mbus"; + dn = of_find_node_by_name(NULL, "internal-regs"); + BUG_ON(!dn); + mvebu_mbus_init(mbus_soc_name, - ARMADA_370_XP_MBUS_WINS_BASE, + of_translate_address(dn, &mbus_wins_offs), ARMADA_370_XP_MBUS_WINS_SIZE, - ARMADA_370_XP_SDRAM_WINS_BASE, + of_translate_address(dn, &sdram_wins_offs), ARMADA_370_XP_SDRAM_WINS_SIZE); +} +static void __init armada_370_xp_timer_and_clk_init(void) +{ + of_clk_init(NULL); + armada_370_xp_timer_init(); + coherency_init(); + armada_370_xp_mbus_init(); #ifdef CONFIG_CACHE_L2X0 l2x0_of_init(0, ~0UL); #endif @@ -75,7 +80,6 @@ static void __init armada_370_xp_init_early(void) static void __init armada_370_xp_dt_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - coherency_init(); } static const char * const armada_370_xp_dt_compat[] = { @@ -87,7 +91,6 @@ DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)") .smp = smp_ops(armada_xp_smp_ops), .init_machine = armada_370_xp_dt_init, .map_io = armada_370_xp_map_io, - .init_early = armada_370_xp_init_early, .init_time = armada_370_xp_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h index 2070e1b4f34..c612b2c4ed6 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.h +++ b/arch/arm/mach-mvebu/armada-370-xp.h @@ -15,16 +15,6 @@ #ifndef __MACH_ARMADA_370_XP_H #define __MACH_ARMADA_370_XP_H -#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 -#define ARMADA_370_XP_REGS_VIRT_BASE IOMEM(0xfec00000) -#define ARMADA_370_XP_REGS_SIZE SZ_1M - -/* These defines can go away once mvebu-mbus has a DT binding */ -#define ARMADA_370_XP_MBUS_WINS_BASE (ARMADA_370_XP_REGS_PHYS_BASE + 0x20000) -#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100 -#define ARMADA_370_XP_SDRAM_WINS_BASE (ARMADA_370_XP_REGS_PHYS_BASE + 0x20180) -#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20 - #ifdef CONFIG_SMP #include <linux/cpumask.h> diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 8278960066c..be117591f7f 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -25,16 +25,11 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <asm/smp_plat.h> +#include <asm/cacheflush.h> #include "armada-370-xp.h" -/* - * Some functions in this file are called very early during SMP - * initialization. At that time the device tree framework is not yet - * ready, and it is not possible to get the register address to - * ioremap it. That's why the pointer below is given with an initial - * value matching its virtual mapping - */ -static void __iomem *coherency_base = ARMADA_370_XP_REGS_VIRT_BASE + 0x20200; +unsigned long __cpuinitdata coherency_phys_base; +static void __iomem *coherency_base; static void __iomem *coherency_cpu_base; /* Coherency fabric registers */ @@ -47,18 +42,6 @@ static struct of_device_id of_coherency_table[] = { { /* end of list */ }, }; -#ifdef CONFIG_SMP -int coherency_get_cpu_count(void) -{ - int reg, cnt; - - reg = readl(coherency_base + COHERENCY_FABRIC_CFG_OFFSET); - cnt = (reg & 0xF) + 1; - - return cnt; -} -#endif - /* Function defined in coherency_ll.S */ int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id); @@ -143,13 +126,31 @@ int __init coherency_init(void) np = of_find_matching_node(NULL, of_coherency_table); if (np) { + struct resource res; pr_info("Initializing Coherency fabric\n"); + of_address_to_resource(np, 0, &res); + coherency_phys_base = res.start; + /* + * Ensure secondary CPUs will see the updated value, + * which they read before they join the coherency + * fabric, and therefore before they are coherent with + * the boot CPU cache. + */ + sync_cache_w(&coherency_phys_base); coherency_base = of_iomap(np, 0); coherency_cpu_base = of_iomap(np, 1); set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); - bus_register_notifier(&platform_bus_type, - &mvebu_hwcc_platform_nb); } return 0; } + +static int __init coherency_late_init(void) +{ + if (of_find_matching_node(NULL, of_coherency_table)) + bus_register_notifier(&platform_bus_type, + &mvebu_hwcc_platform_nb); + return 0; +} + +postcore_initcall(coherency_late_init); diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h index 2f428137f6f..df33ad8a6c0 100644 --- a/arch/arm/mach-mvebu/coherency.h +++ b/arch/arm/mach-mvebu/coherency.h @@ -14,10 +14,6 @@ #ifndef __MACH_370_XP_COHERENCY_H #define __MACH_370_XP_COHERENCY_H -#ifdef CONFIG_SMP -int coherency_get_cpu_count(void); -#endif - int set_cpu_coherent(int cpu_id, int smp_group_id); int coherency_init(void); diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h index aa27bc2ffb6..98defd5e92c 100644 --- a/arch/arm/mach-mvebu/common.h +++ b/arch/arm/mach-mvebu/common.h @@ -15,6 +15,8 @@ #ifndef __ARCH_MVEBU_COMMON_H #define __ARCH_MVEBU_COMMON_H +#define ARMADA_XP_MAX_CPUS 4 + void mvebu_restart(char mode, const char *cmd); void armada_370_xp_init_irq(void); diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S index a06e0ede8c0..7147300c8af 100644 --- a/arch/arm/mach-mvebu/headsmp.S +++ b/arch/arm/mach-mvebu/headsmp.S @@ -21,12 +21,6 @@ #include <linux/linkage.h> #include <linux/init.h> -/* - * At this stage the secondary CPUs don't have acces yet to the MMU, so - * we have to provide physical addresses - */ -#define ARMADA_XP_CFB_BASE 0xD0020200 - __CPUINIT /* @@ -35,15 +29,21 @@ * startup */ ENTRY(armada_xp_secondary_startup) + /* Get coherency fabric base physical address */ + adr r0, 1f + ldr r1, [r0] + ldr r0, [r0, r1] /* Read CPU id */ mrc p15, 0, r1, c0, c0, 5 and r1, r1, #0xF /* Add CPU to coherency fabric */ - ldr r0, =ARMADA_XP_CFB_BASE - bl ll_set_cpu_coherent b secondary_startup ENDPROC(armada_xp_secondary_startup) + + .align 2 +1: + .long coherency_phys_base - . diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index 875ea748391..93f2f3ab45f 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -88,8 +88,16 @@ static int __cpuinit armada_xp_boot_secondary(unsigned int cpu, static void __init armada_xp_smp_init_cpus(void) { + struct device_node *np; unsigned int i, ncores; - ncores = coherency_get_cpu_count(); + + np = of_find_node_by_name(NULL, "cpus"); + if (!np) + panic("No 'cpus' node found\n"); + + ncores = of_get_child_count(np); + if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS) + panic("Invalid number of CPUs in DT\n"); /* Limit possible CPUs to defconfig */ if (ncores > nr_cpu_ids) { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 6903d47f625..1fdb4621659 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS select PROC_DEVICETREE if PROC_FS select SOC_BUS select SPARSE_IRQ + select TI_PRIV_EDMA select USE_OF help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 @@ -149,6 +150,14 @@ config SOC_AM33XX select MULTI_IRQ_HANDLER select COMMON_CLK +config SOC_AM43XX + bool "TI AM43x" + select CPU_V7 + select MULTI_IRQ_HANDLER + select ARM_GIC + select COMMON_CLK + select MACH_OMAP_GENERIC + config OMAP_PACKAGE_ZAF bool diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index add1d27a7d9..8e8c605ebef 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o @@ -34,10 +35,10 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o smp-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o smp-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o -omap-4-5-common = omap4-common.o omap-wakeupgen.o \ - sleep44xx.o -obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y) -obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) +omap-4-5-common = omap4-common.o omap-wakeupgen.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y) sleep44xx.o +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) sleep44xx.o +obj-$(CONFIG_SOC_AM43XX) += $(omap-4-5-common) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) @@ -58,6 +59,8 @@ obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o obj-$(CONFIG_SOC_AM33XX) += am33xx-restart.o obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o +obj-$(CONFIG_ARCH_OMAP4) += omap4-restart.o +obj-$(CONFIG_SOC_OMAP5) += omap4-restart.o # Pin multiplexing obj-$(CONFIG_SOC_OMAP2420) += mux2420.o @@ -109,6 +112,7 @@ obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o +obj-$(CONFIG_SOC_AM43XX) += prm33xx.o cm33xx.o omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ vc44xx_data.o vp44xx_data.o @@ -124,7 +128,9 @@ obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common) +obj-$(CONFIG_SOC_AM43XX) += $(voltagedomain-common) obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common) +obj-$(CONFIG_SOC_OMAP5) += voltagedomains54xx_data.o # OMAP powerdomain framework powerdomain-common += powerdomain.o powerdomain-common.o @@ -138,7 +144,9 @@ obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common) obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o +obj-$(CONFIG_SOC_AM43XX) += $(powerdomain-common) obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) +obj-$(CONFIG_SOC_OMAP5) += powerdomains54xx_data.o # PRCM clockdomain control clockdomain-common += clockdomain.o @@ -153,7 +161,9 @@ obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common) obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o +obj-$(CONFIG_SOC_AM43XX) += $(clockdomain-common) obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) +obj-$(CONFIG_SOC_OMAP5) += clockdomains54xx_data.o # Clock framework obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o @@ -196,6 +206,7 @@ obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_interconnect_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_data.o obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o +obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o # EMU peripherals obj-$(CONFIG_OMAP3_EMU) += emu.o diff --git a/arch/arm/mach-omap2/am33xx.h b/arch/arm/mach-omap2/am33xx.h index 43296c1af9e..5eef093e673 100644 --- a/arch/arm/mach-omap2/am33xx.h +++ b/arch/arm/mach-omap2/am33xx.h @@ -21,6 +21,7 @@ #define AM33XX_SCM_BASE 0x44E10000 #define AM33XX_CTRL_BASE AM33XX_SCM_BASE #define AM33XX_PRCM_BASE 0x44E00000 +#define AM43XX_PRCM_BASE 0x44DF0000 #define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + 0x3FC) #endif /* __ASM_ARCH_AM33XX_H */ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 88aa6b1835c..e5fbfed69aa 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -185,3 +185,19 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") .restart = omap44xx_restart, MACHINE_END #endif + +#ifdef CONFIG_SOC_AM43XX +static const char *am43_boards_compat[] __initdata = { + "ti,am43", + NULL, +}; + +DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") + .map_io = am33xx_map_io, + .init_early = am43xx_init_early, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_time = omap3_sync32k_timer_init, + .dt_compat = am43_boards_compat, +MACHINE_END +#endif diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index af3544ce4f0..0346de56436 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -862,6 +862,33 @@ static struct clk_hw_omap wdt1_fck_hw = { DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops); +static const char *pwmss_clk_parents[] = { + "dpll_per_m2_ck", +}; + +static const struct clk_ops ehrpwm_tbclk_ops = { + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, +}; + +DEFINE_CLK_OMAP_MUX_GATE(ehrpwm0_tbclk, "l4ls_clkdm", + NULL, NULL, 0, + AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL), + AM33XX_PWMSS0_TBCLKEN_SHIFT, + NULL, pwmss_clk_parents, ehrpwm_tbclk_ops); + +DEFINE_CLK_OMAP_MUX_GATE(ehrpwm1_tbclk, "l4ls_clkdm", + NULL, NULL, 0, + AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL), + AM33XX_PWMSS1_TBCLKEN_SHIFT, + NULL, pwmss_clk_parents, ehrpwm_tbclk_ops); + +DEFINE_CLK_OMAP_MUX_GATE(ehrpwm2_tbclk, "l4ls_clkdm", + NULL, NULL, 0, + AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL), + AM33XX_PWMSS2_TBCLKEN_SHIFT, + NULL, pwmss_clk_parents, ehrpwm_tbclk_ops); + /* * clkdev */ @@ -942,6 +969,9 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "clkout2_div_ck", &clkout2_div_ck), CLK(NULL, "timer_32k_ck", &clkdiv32k_ick), CLK(NULL, "timer_sys_ck", &sys_clkin_ck), + CLK("48300200.ehrpwm", "tbclk", &ehrpwm0_tbclk), + CLK("48302200.ehrpwm", "tbclk", &ehrpwm1_tbclk), + CLK("48304200.ehrpwm", "tbclk", &ehrpwm2_tbclk), }; diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 45cd26430d1..334b7674590 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -3329,11 +3329,7 @@ static struct omap_clk omap36xx_am35xx_omap3430es2plus_clks[] = { CLK(NULL, "cpefuse_fck", &cpefuse_fck), CLK(NULL, "ts_fck", &ts_fck), CLK(NULL, "usbtll_fck", &usbtll_fck), - CLK("usbhs_omap", "usbtll_fck", &usbtll_fck), - CLK("usbhs_tll", "usbtll_fck", &usbtll_fck), CLK(NULL, "usbtll_ick", &usbtll_ick), - CLK("usbhs_omap", "usbtll_ick", &usbtll_ick), - CLK("usbhs_tll", "usbtll_ick", &usbtll_ick), CLK("omap_hsmmc.2", "ick", &mmchs3_ick), CLK(NULL, "mmchs3_ick", &mmchs3_ick), CLK(NULL, "mmchs3_fck", &mmchs3_fck), @@ -3343,7 +3339,6 @@ static struct omap_clk omap36xx_am35xx_omap3430es2plus_clks[] = { CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck), CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck), CLK(NULL, "usbhost_ick", &usbhost_ick), - CLK("usbhs_omap", "usbhost_ick", &usbhost_ick), }; /* @@ -3463,12 +3458,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "utmi_p2_gfclk", &dummy_ck), CLK(NULL, "xclk60mhsp1_ck", &dummy_ck), CLK(NULL, "xclk60mhsp2_ck", &dummy_ck), - CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck), - CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck), - CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck), - CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck), - CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck), - CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck), CLK(NULL, "init_60m_fclk", &dummy_ck), CLK(NULL, "gpt1_fck", &gpt1_fck), CLK(NULL, "aes2_ick", &aes2_ick), diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 2da37656a69..daeecf1b89f 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -216,6 +216,7 @@ extern void __init omap243x_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); extern void __init am33xx_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); +extern void __init omap54xx_clockdomains_init(void); extern void clkdm_add_autodeps(struct clockdomain *clkdm); extern void clkdm_del_autodeps(struct clockdomain *clkdm); diff --git a/arch/arm/mach-omap2/clockdomains54xx_data.c b/arch/arm/mach-omap2/clockdomains54xx_data.c new file mode 100644 index 00000000000..1a3c69d2e14 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains54xx_data.c @@ -0,0 +1,464 @@ +/* + * OMAP54XX Clock domains framework + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Abhijit Pagare (abhijitpagare@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * Paul Walmsley (paul@pwsan.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/io.h> + +#include "clockdomain.h" +#include "cm1_54xx.h" +#include "cm2_54xx.h" + +#include "cm-regbits-54xx.h" +#include "prm54xx.h" +#include "prcm44xx.h" +#include "prcm_mpu54xx.h" + +/* Static Dependencies for OMAP4 Clock Domains */ + +static struct clkdm_dep c2c_wkup_sleep_deps[] = { + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "iva_clkdm" }, + { .clkdm_name = "l3init_clkdm" }, + { .clkdm_name = "l3main1_clkdm" }, + { .clkdm_name = "l3main2_clkdm" }, + { .clkdm_name = "l4cfg_clkdm" }, + { .clkdm_name = "l4per_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep cam_wkup_sleep_deps[] = { + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "iva_clkdm" }, + { .clkdm_name = "l3main1_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep dma_wkup_sleep_deps[] = { + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "dss_clkdm" }, + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "ipu_clkdm" }, + { .clkdm_name = "iva_clkdm" }, + { .clkdm_name = "l3init_clkdm" }, + { .clkdm_name = "l3main1_clkdm" }, + { .clkdm_name = "l4cfg_clkdm" }, + { .clkdm_name = "l4per_clkdm" }, + { .clkdm_name = "l4sec_clkdm" }, + { .clkdm_name = "wkupaon_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep dsp_wkup_sleep_deps[] = { + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "iva_clkdm" }, + { .clkdm_name = "l3init_clkdm" }, + { .clkdm_name = "l3main1_clkdm" }, + { .clkdm_name = "l3main2_clkdm" }, + { .clkdm_name = "l4cfg_clkdm" }, + { .clkdm_name = "l4per_clkdm" }, + { .clkdm_name = "wkupaon_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep dss_wkup_sleep_deps[] = { + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "iva_clkdm" }, + { .clkdm_name = "l3main2_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep gpu_wkup_sleep_deps[] = { + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "iva_clkdm" }, + { .clkdm_name = "l3main1_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep ipu_wkup_sleep_deps[] = { + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "dsp_clkdm" }, + { .clkdm_name = "dss_clkdm" }, + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "gpu_clkdm" }, + { .clkdm_name = "iva_clkdm" }, + { .clkdm_name = "l3init_clkdm" }, + { .clkdm_name = "l3main1_clkdm" }, + { .clkdm_name = "l3main2_clkdm" }, + { .clkdm_name = "l4cfg_clkdm" }, + { .clkdm_name = "l4per_clkdm" }, + { .clkdm_name = "l4sec_clkdm" }, + { .clkdm_name = "wkupaon_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep iva_wkup_sleep_deps[] = { + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "l3main1_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep l3init_wkup_sleep_deps[] = { + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "iva_clkdm" }, + { .clkdm_name = "l4cfg_clkdm" }, + { .clkdm_name = "l4per_clkdm" }, + { .clkdm_name = "l4sec_clkdm" }, + { .clkdm_name = "wkupaon_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep l4sec_wkup_sleep_deps[] = { + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "l3main1_clkdm" }, + { .clkdm_name = "l4per_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep mipiext_wkup_sleep_deps[] = { + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "iva_clkdm" }, + { .clkdm_name = "l3init_clkdm" }, + { .clkdm_name = "l3main1_clkdm" }, + { .clkdm_name = "l3main2_clkdm" }, + { .clkdm_name = "l4cfg_clkdm" }, + { .clkdm_name = "l4per_clkdm" }, + { NULL }, +}; + +static struct clkdm_dep mpu_wkup_sleep_deps[] = { + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "dsp_clkdm" }, + { .clkdm_name = "dss_clkdm" }, + { .clkdm_name = "emif_clkdm" }, + { .clkdm_name = "gpu_clkdm" }, + { .clkdm_name = "ipu_clkdm" }, + { .clkdm_name = "iva_clkdm" }, + { .clkdm_name = "l3init_clkdm" }, + { .clkdm_name = "l3main1_clkdm" }, + { .clkdm_name = "l3main2_clkdm" }, + { .clkdm_name = "l4cfg_clkdm" }, + { .clkdm_name = "l4per_clkdm" }, + { .clkdm_name = "l4sec_clkdm" }, + { .clkdm_name = "wkupaon_clkdm" }, + { NULL }, +}; + +static struct clockdomain l4sec_54xx_clkdm = { + .name = "l4sec_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_L4SEC_CDOFFS, + .dep_bit = OMAP54XX_L4SEC_STATDEP_SHIFT, + .wkdep_srcs = l4sec_wkup_sleep_deps, + .sleepdep_srcs = l4sec_wkup_sleep_deps, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain iva_54xx_clkdm = { + .name = "iva_clkdm", + .pwrdm = { .name = "iva_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_IVA_INST, + .clkdm_offs = OMAP54XX_CM_CORE_IVA_IVA_CDOFFS, + .dep_bit = OMAP54XX_IVA_STATDEP_SHIFT, + .wkdep_srcs = iva_wkup_sleep_deps, + .sleepdep_srcs = iva_wkup_sleep_deps, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain mipiext_54xx_clkdm = { + .name = "mipiext_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_MIPIEXT_CDOFFS, + .wkdep_srcs = mipiext_wkup_sleep_deps, + .sleepdep_srcs = mipiext_wkup_sleep_deps, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain l3main2_54xx_clkdm = { + .name = "l3main2_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_L3MAIN2_CDOFFS, + .dep_bit = OMAP54XX_L3MAIN2_STATDEP_SHIFT, + .flags = CLKDM_CAN_HWSUP, +}; + +static struct clockdomain l3main1_54xx_clkdm = { + .name = "l3main1_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_L3MAIN1_CDOFFS, + .dep_bit = OMAP54XX_L3MAIN1_STATDEP_SHIFT, + .flags = CLKDM_CAN_HWSUP, +}; + +static struct clockdomain custefuse_54xx_clkdm = { + .name = "custefuse_clkdm", + .pwrdm = { .name = "custefuse_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CUSTEFUSE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CUSTEFUSE_CUSTEFUSE_CDOFFS, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain ipu_54xx_clkdm = { + .name = "ipu_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_IPU_CDOFFS, + .dep_bit = OMAP54XX_IPU_STATDEP_SHIFT, + .wkdep_srcs = ipu_wkup_sleep_deps, + .sleepdep_srcs = ipu_wkup_sleep_deps, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain l4cfg_54xx_clkdm = { + .name = "l4cfg_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_L4CFG_CDOFFS, + .dep_bit = OMAP54XX_L4CFG_STATDEP_SHIFT, + .flags = CLKDM_CAN_HWSUP, +}; + +static struct clockdomain abe_54xx_clkdm = { + .name = "abe_clkdm", + .pwrdm = { .name = "abe_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_AON_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_AON_ABE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_AON_ABE_ABE_CDOFFS, + .dep_bit = OMAP54XX_ABE_STATDEP_SHIFT, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain dss_54xx_clkdm = { + .name = "dss_clkdm", + .pwrdm = { .name = "dss_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_DSS_INST, + .clkdm_offs = OMAP54XX_CM_CORE_DSS_DSS_CDOFFS, + .dep_bit = OMAP54XX_DSS_STATDEP_SHIFT, + .wkdep_srcs = dss_wkup_sleep_deps, + .sleepdep_srcs = dss_wkup_sleep_deps, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain dsp_54xx_clkdm = { + .name = "dsp_clkdm", + .pwrdm = { .name = "dsp_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_AON_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_AON_DSP_INST, + .clkdm_offs = OMAP54XX_CM_CORE_AON_DSP_DSP_CDOFFS, + .dep_bit = OMAP54XX_DSP_STATDEP_SHIFT, + .wkdep_srcs = dsp_wkup_sleep_deps, + .sleepdep_srcs = dsp_wkup_sleep_deps, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain c2c_54xx_clkdm = { + .name = "c2c_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_C2C_CDOFFS, + .wkdep_srcs = c2c_wkup_sleep_deps, + .sleepdep_srcs = c2c_wkup_sleep_deps, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain l4per_54xx_clkdm = { + .name = "l4per_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_L4PER_CDOFFS, + .dep_bit = OMAP54XX_L4PER_STATDEP_SHIFT, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain gpu_54xx_clkdm = { + .name = "gpu_clkdm", + .pwrdm = { .name = "gpu_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_GPU_INST, + .clkdm_offs = OMAP54XX_CM_CORE_GPU_GPU_CDOFFS, + .dep_bit = OMAP54XX_GPU_STATDEP_SHIFT, + .wkdep_srcs = gpu_wkup_sleep_deps, + .sleepdep_srcs = gpu_wkup_sleep_deps, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain wkupaon_54xx_clkdm = { + .name = "wkupaon_clkdm", + .pwrdm = { .name = "wkupaon_pwrdm" }, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .cm_inst = OMAP54XX_PRM_WKUPAON_CM_INST, + .clkdm_offs = OMAP54XX_PRM_WKUPAON_CM_WKUPAON_CDOFFS, + .dep_bit = OMAP54XX_WKUPAON_STATDEP_SHIFT, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain mpu0_54xx_clkdm = { + .name = "mpu0_clkdm", + .pwrdm = { .name = "cpu0_pwrdm" }, + .prcm_partition = OMAP54XX_PRCM_MPU_PARTITION, + .cm_inst = OMAP54XX_PRCM_MPU_CM_C0_INST, + .clkdm_offs = OMAP54XX_PRCM_MPU_CM_C0_CPU0_CDOFFS, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain mpu1_54xx_clkdm = { + .name = "mpu1_clkdm", + .pwrdm = { .name = "cpu1_pwrdm" }, + .prcm_partition = OMAP54XX_PRCM_MPU_PARTITION, + .cm_inst = OMAP54XX_PRCM_MPU_CM_C1_INST, + .clkdm_offs = OMAP54XX_PRCM_MPU_CM_C1_CPU1_CDOFFS, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain coreaon_54xx_clkdm = { + .name = "coreaon_clkdm", + .pwrdm = { .name = "coreaon_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_COREAON_INST, + .clkdm_offs = OMAP54XX_CM_CORE_COREAON_COREAON_CDOFFS, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain mpu_54xx_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_AON_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_AON_MPU_INST, + .clkdm_offs = OMAP54XX_CM_CORE_AON_MPU_MPU_CDOFFS, + .wkdep_srcs = mpu_wkup_sleep_deps, + .sleepdep_srcs = mpu_wkup_sleep_deps, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain l3init_54xx_clkdm = { + .name = "l3init_clkdm", + .pwrdm = { .name = "l3init_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_L3INIT_INST, + .clkdm_offs = OMAP54XX_CM_CORE_L3INIT_L3INIT_CDOFFS, + .dep_bit = OMAP54XX_L3INIT_STATDEP_SHIFT, + .wkdep_srcs = l3init_wkup_sleep_deps, + .sleepdep_srcs = l3init_wkup_sleep_deps, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain dma_54xx_clkdm = { + .name = "dma_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_DMA_CDOFFS, + .wkdep_srcs = dma_wkup_sleep_deps, + .sleepdep_srcs = dma_wkup_sleep_deps, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain l3instr_54xx_clkdm = { + .name = "l3instr_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_L3INSTR_CDOFFS, +}; + +static struct clockdomain emif_54xx_clkdm = { + .name = "emif_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CORE_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CORE_EMIF_CDOFFS, + .dep_bit = OMAP54XX_EMIF_STATDEP_SHIFT, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain emu_54xx_clkdm = { + .name = "emu_clkdm", + .pwrdm = { .name = "emu_pwrdm" }, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .cm_inst = OMAP54XX_PRM_EMU_CM_INST, + .clkdm_offs = OMAP54XX_PRM_EMU_CM_EMU_CDOFFS, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, +}; + +static struct clockdomain cam_54xx_clkdm = { + .name = "cam_clkdm", + .pwrdm = { .name = "cam_pwrdm" }, + .prcm_partition = OMAP54XX_CM_CORE_PARTITION, + .cm_inst = OMAP54XX_CM_CORE_CAM_INST, + .clkdm_offs = OMAP54XX_CM_CORE_CAM_CAM_CDOFFS, + .wkdep_srcs = cam_wkup_sleep_deps, + .sleepdep_srcs = cam_wkup_sleep_deps, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +/* As clockdomains are added or removed above, this list must also be changed */ +static struct clockdomain *clockdomains_omap54xx[] __initdata = { + &l4sec_54xx_clkdm, + &iva_54xx_clkdm, + &mipiext_54xx_clkdm, + &l3main2_54xx_clkdm, + &l3main1_54xx_clkdm, + &custefuse_54xx_clkdm, + &ipu_54xx_clkdm, + &l4cfg_54xx_clkdm, + &abe_54xx_clkdm, + &dss_54xx_clkdm, + &dsp_54xx_clkdm, + &c2c_54xx_clkdm, + &l4per_54xx_clkdm, + &gpu_54xx_clkdm, + &wkupaon_54xx_clkdm, + &mpu0_54xx_clkdm, + &mpu1_54xx_clkdm, + &coreaon_54xx_clkdm, + &mpu_54xx_clkdm, + &l3init_54xx_clkdm, + &dma_54xx_clkdm, + &l3instr_54xx_clkdm, + &emif_54xx_clkdm, + &emu_54xx_clkdm, + &cam_54xx_clkdm, + NULL +}; + +void __init omap54xx_clockdomains_init(void) +{ + clkdm_register_platform_funcs(&omap4_clkdm_operations); + clkdm_register_clkdms(clockdomains_omap54xx); + clkdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/cm-regbits-54xx.h b/arch/arm/mach-omap2/cm-regbits-54xx.h new file mode 100644 index 00000000000..e83b8e352b6 --- /dev/null +++ b/arch/arm/mach-omap2/cm-regbits-54xx.h @@ -0,0 +1,1737 @@ +/* + * OMAP54xx Clock Management register bits + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_54XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_54XX_H + +/* Used by CM_DSP_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP, CM_MPU_DYNAMICDEP */ +#define OMAP54XX_ABE_DYNDEP_SHIFT 3 +#define OMAP54XX_ABE_DYNDEP_WIDTH 0x1 +#define OMAP54XX_ABE_DYNDEP_MASK (1 << 3) + +/* + * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP, + * CM_IPU_STATICDEP, CM_L3INIT_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP + */ +#define OMAP54XX_ABE_STATDEP_SHIFT 3 +#define OMAP54XX_ABE_STATDEP_WIDTH 0x1 +#define OMAP54XX_ABE_STATDEP_MASK (1 << 3) + +/* + * Used by CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_IVA, + * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO1, + * CM_AUTOIDLE_DPLL_UNIPRO2, CM_AUTOIDLE_DPLL_USB + */ +#define OMAP54XX_AUTO_DPLL_MODE_SHIFT 0 +#define OMAP54XX_AUTO_DPLL_MODE_WIDTH 0x3 +#define OMAP54XX_AUTO_DPLL_MODE_MASK (0x7 << 0) + +/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +#define OMAP54XX_C2C_DYNDEP_SHIFT 18 +#define OMAP54XX_C2C_DYNDEP_WIDTH 0x1 +#define OMAP54XX_C2C_DYNDEP_MASK (1 << 18) + +/* Used by CM_MPU_STATICDEP */ +#define OMAP54XX_C2C_STATDEP_SHIFT 18 +#define OMAP54XX_C2C_STATDEP_WIDTH 0x1 +#define OMAP54XX_C2C_STATDEP_MASK (1 << 18) + +/* Used by CM_IPU_DYNAMICDEP, CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +#define OMAP54XX_CAM_DYNDEP_SHIFT 9 +#define OMAP54XX_CAM_DYNDEP_WIDTH 0x1 +#define OMAP54XX_CAM_DYNDEP_MASK (1 << 9) + +/* + * Used by CM_DMA_STATICDEP, CM_DSP_STATICDEP, CM_IPU_STATICDEP, + * CM_MPU_STATICDEP + */ +#define OMAP54XX_CAM_STATDEP_SHIFT 9 +#define OMAP54XX_CAM_STATDEP_WIDTH 0x1 +#define OMAP54XX_CAM_STATDEP_MASK (1 << 9) + +/* Used by CM_ABE_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_ABE_24M_GFCLK_SHIFT 13 +#define OMAP54XX_CLKACTIVITY_ABE_24M_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_ABE_24M_GFCLK_MASK (1 << 13) + +/* Used by CM_ABE_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_ABE_32K_CLK_SHIFT 12 +#define OMAP54XX_CLKACTIVITY_ABE_32K_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_ABE_32K_CLK_MASK (1 << 12) + +/* Used by CM_ABE_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_ABE_GICLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_ABE_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_ABE_GICLK_MASK (1 << 9) + +/* Used by CM_WKUPAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_ABE_LP_CLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_ABE_LP_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_ABE_LP_CLK_MASK (1 << 9) + +/* Used by CM_ABE_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_ABE_SYS_CLK_SHIFT 11 +#define OMAP54XX_CLKACTIVITY_ABE_SYS_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_ABE_SYS_CLK_MASK (1 << 11) + +/* Used by CM_ABE_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_ABE_X2_CLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_ABE_X2_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_ABE_X2_CLK_MASK (1 << 8) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_BB2D_GFCLK_SHIFT 13 +#define OMAP54XX_CLKACTIVITY_BB2D_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_BB2D_GFCLK_MASK (1 << 13) + +/* Used by CM_C2C_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_C2C_GFCLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_C2C_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_C2C_GFCLK_MASK (1 << 9) + +/* Used by CM_C2C_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_C2C_GICLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_C2C_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_C2C_GICLK_MASK (1 << 10) + +/* Used by CM_C2C_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_C2C_L4_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_C2C_L4_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_C2C_L4_GICLK_MASK (1 << 8) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_CAM_BOOST_GCLK_SHIFT 11 +#define OMAP54XX_CLKACTIVITY_CAM_BOOST_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_CAM_BOOST_GCLK_MASK (1 << 11) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_CAM_GCLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_CAM_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_CAM_GCLK_MASK (1 << 8) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_CAM_L3_GICLK_SHIFT 12 +#define OMAP54XX_CLKACTIVITY_CAM_L3_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_CAM_L3_GICLK_MASK (1 << 12) + +/* Used by CM_COREAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_COREAON_32K_GFCLK_SHIFT 12 +#define OMAP54XX_CLKACTIVITY_COREAON_32K_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_COREAON_32K_GFCLK_MASK (1 << 12) + +/* Used by CM_COREAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_COREAON_IO_SRCOMP_GFCLK_SHIFT 14 +#define OMAP54XX_CLKACTIVITY_COREAON_IO_SRCOMP_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_COREAON_IO_SRCOMP_GFCLK_MASK (1 << 14) + +/* Used by CM_COREAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_COREAON_L4_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_COREAON_L4_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_COREAON_L4_GICLK_MASK (1 << 8) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_CSI_PHY_GFCLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_CSI_PHY_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_CSI_PHY_GFCLK_MASK (1 << 9) + +/* Used by CM_CUSTEFUSE_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_L4_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_L4_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_L4_GICLK_MASK (1 << 8) + +/* Used by CM_CUSTEFUSE_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_SYS_GFCLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_SYS_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_SYS_GFCLK_MASK (1 << 9) + +/* Used by CM_EMIF_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_DLL_GCLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_DLL_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_DLL_GCLK_MASK (1 << 9) + +/* Used by CM_DMA_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_DMA_L3_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_DMA_L3_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_DMA_L3_GICLK_MASK (1 << 8) + +/* Used by CM_DSP_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_DSP_GCLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_DSP_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_DSP_GCLK_MASK (1 << 8) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_DSS_GFCLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_DSS_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_DSS_GFCLK_MASK (1 << 9) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_DSS_L3_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_DSS_L3_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_DSS_L3_GICLK_MASK (1 << 8) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_DSS_SYS_GFCLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_DSS_SYS_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_DSS_SYS_GFCLK_MASK (1 << 10) + +/* Used by CM_EMIF_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_EMIF_L3_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_EMIF_L3_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_EMIF_L3_GICLK_MASK (1 << 8) + +/* Used by CM_EMIF_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_EMIF_LL_GCLK_SHIFT 11 +#define OMAP54XX_CLKACTIVITY_EMIF_LL_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_EMIF_LL_GCLK_MASK (1 << 11) + +/* Used by CM_EMIF_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_EMIF_PHY_GCLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_EMIF_PHY_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_EMIF_PHY_GCLK_MASK (1 << 10) + +/* Used by CM_EMU_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_EMU_SYS_GCLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_EMU_SYS_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_EMU_SYS_GCLK_MASK (1 << 8) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_FDIF_GCLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_FDIF_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_FDIF_GCLK_MASK (1 << 10) + +/* Used by CM_ABE_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_FUNC_24M_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_FUNC_24M_GFCLK_MASK (1 << 10) + +/* Used by CM_GPU_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_GPU_CORE_GCLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_GPU_CORE_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_GPU_CORE_GCLK_MASK (1 << 9) + +/* Used by CM_GPU_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_GPU_HYD_GCLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_GPU_HYD_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_GPU_HYD_GCLK_MASK (1 << 10) + +/* Used by CM_GPU_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_GPU_SYS_GCLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_GPU_SYS_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_GPU_SYS_GCLK_MASK (1 << 8) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_HDMI_CEC_GFCLK_SHIFT 12 +#define OMAP54XX_CLKACTIVITY_HDMI_CEC_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_HDMI_CEC_GFCLK_MASK (1 << 12) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_HDMI_PHY_GFCLK_SHIFT 11 +#define OMAP54XX_CLKACTIVITY_HDMI_PHY_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_HDMI_PHY_GFCLK_MASK (1 << 11) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT 20 +#define OMAP54XX_CLKACTIVITY_HSIC_P1_480M_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK (1 << 20) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT 26 +#define OMAP54XX_CLKACTIVITY_HSIC_P1_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_HSIC_P1_GFCLK_MASK (1 << 26) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT 21 +#define OMAP54XX_CLKACTIVITY_HSIC_P2_480M_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK (1 << 21) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT 27 +#define OMAP54XX_CLKACTIVITY_HSIC_P2_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_HSIC_P2_GFCLK_MASK (1 << 27) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_HSIC_P3_480M_GFCLK_SHIFT 6 +#define OMAP54XX_CLKACTIVITY_HSIC_P3_480M_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_HSIC_P3_480M_GFCLK_MASK (1 << 6) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_HSIC_P3_GFCLK_SHIFT 7 +#define OMAP54XX_CLKACTIVITY_HSIC_P3_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_HSIC_P3_GFCLK_MASK (1 << 7) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_HSI_GFCLK_SHIFT 16 +#define OMAP54XX_CLKACTIVITY_HSI_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_HSI_GFCLK_MASK (1 << 16) + +/* Used by CM_IPU_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_IPU_GCLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_IPU_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_IPU_GCLK_MASK (1 << 8) + +/* Used by CM_IVA_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_IVA_GCLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_IVA_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_IVA_GCLK_MASK (1 << 8) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3INIT_48M_GFCLK_SHIFT 12 +#define OMAP54XX_CLKACTIVITY_L3INIT_48M_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3INIT_48M_GFCLK_MASK (1 << 12) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P1_GFCLK_SHIFT 28 +#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P1_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P1_GFCLK_MASK (1 << 28) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P2_GFCLK_SHIFT 29 +#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P2_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P2_GFCLK_MASK (1 << 29) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3INIT_L3_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_L3INIT_L3_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3INIT_L3_GICLK_MASK (1 << 8) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3INIT_L4_GICLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_L3INIT_L4_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3INIT_L4_GICLK_MASK (1 << 9) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3INIT_USB_OTG_SS_LFPS_TX_GFCLK_SHIFT 11 +#define OMAP54XX_CLKACTIVITY_L3INIT_USB_OTG_SS_LFPS_TX_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3INIT_USB_OTG_SS_LFPS_TX_GFCLK_MASK (1 << 11) + +/* Used by CM_L3INSTR_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3INSTR_DLL_AGING_GCLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_L3INSTR_DLL_AGING_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3INSTR_DLL_AGING_GCLK_MASK (1 << 9) + +/* Used by CM_L3INSTR_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3INSTR_L3_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_L3INSTR_L3_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3INSTR_L3_GICLK_MASK (1 << 8) + +/* Used by CM_L3INSTR_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3INSTR_TS_GCLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_L3INSTR_TS_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3INSTR_TS_GCLK_MASK (1 << 10) + +/* Used by CM_L3MAIN1_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3MAIN1_L3_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_L3MAIN1_L3_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3MAIN1_L3_GICLK_MASK (1 << 8) + +/* Used by CM_L3MAIN2_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L3MAIN2_L3_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_L3MAIN2_L3_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L3MAIN2_L3_GICLK_MASK (1 << 8) + +/* Used by CM_L4CFG_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L4CFG_L4_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_L4CFG_L4_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L4CFG_L4_GICLK_MASK (1 << 8) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L4PER_L4_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_L4PER_L4_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L4PER_L4_GICLK_MASK (1 << 8) + +/* Used by CM_L4SEC_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L4SEC_L3_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_L4SEC_L3_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L4SEC_L3_GICLK_MASK (1 << 8) + +/* Used by CM_L4SEC_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_L4SEC_L4_GICLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_L4SEC_L4_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_L4SEC_L4_GICLK_MASK (1 << 9) + +/* Used by CM_MIPIEXT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_MIPIEXT_L3_GICLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_MIPIEXT_L3_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_MIPIEXT_L3_GICLK_MASK (1 << 8) + +/* Used by CM_MIPIEXT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_MIPIEXT_PHY_REF_GFCLK_SHIFT 11 +#define OMAP54XX_CLKACTIVITY_MIPIEXT_PHY_REF_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_MIPIEXT_PHY_REF_GFCLK_MASK (1 << 11) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_MMC1_32K_GFCLK_SHIFT 2 +#define OMAP54XX_CLKACTIVITY_MMC1_32K_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_MMC1_32K_GFCLK_MASK (1 << 2) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_MMC1_GFCLK_SHIFT 17 +#define OMAP54XX_CLKACTIVITY_MMC1_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_MMC1_GFCLK_MASK (1 << 17) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_MMC2_GFCLK_SHIFT 18 +#define OMAP54XX_CLKACTIVITY_MMC2_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_MMC2_GFCLK_MASK (1 << 18) + +/* Used by CM_MPU_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_MPU_GCLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_MPU_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_MPU_GCLK_MASK (1 << 8) + +/* Used by CM_ABE_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_PAD_CLKS_SHIFT 14 +#define OMAP54XX_CLKACTIVITY_PAD_CLKS_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_PAD_CLKS_MASK (1 << 14) + +/* Used by CM_ABE_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_PAD_SLIMBUS1_CLK_SHIFT 15 +#define OMAP54XX_CLKACTIVITY_PAD_SLIMBUS1_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_PAD_SLIMBUS1_CLK_MASK (1 << 15) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP1_SHIFT 3 +#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP1_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP1_MASK (1 << 3) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP2_SHIFT 4 +#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP2_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP2_MASK (1 << 4) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_PER_12M_GFCLK_SHIFT 15 +#define OMAP54XX_CLKACTIVITY_PER_12M_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_PER_12M_GFCLK_MASK (1 << 15) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_PER_32K_GFCLK_SHIFT 17 +#define OMAP54XX_CLKACTIVITY_PER_32K_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_PER_32K_GFCLK_MASK (1 << 17) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_PER_48M_GFCLK_SHIFT 18 +#define OMAP54XX_CLKACTIVITY_PER_48M_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_PER_48M_GFCLK_MASK (1 << 18) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_PER_96M_GFCLK_SHIFT 19 +#define OMAP54XX_CLKACTIVITY_PER_96M_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_PER_96M_GFCLK_MASK (1 << 19) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_SATA_REF_GFCLK_SHIFT 19 +#define OMAP54XX_CLKACTIVITY_SATA_REF_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_SATA_REF_GFCLK_MASK (1 << 19) + +/* Used by CM_COREAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_SR_CORE_SYS_GFCLK_SHIFT 11 +#define OMAP54XX_CLKACTIVITY_SR_CORE_SYS_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_SR_CORE_SYS_GFCLK_MASK (1 << 11) + +/* Used by CM_COREAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_SR_MM_SYS_GFCLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_SR_MM_SYS_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_SR_MM_SYS_GFCLK_MASK (1 << 10) + +/* Used by CM_COREAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_SR_MPU_SYS_GFCLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_SR_MPU_SYS_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_SR_MPU_SYS_GFCLK_MASK (1 << 9) + +/* Used by CM_WKUPAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_SYS_CLK_SHIFT 8 +#define OMAP54XX_CLKACTIVITY_SYS_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_SYS_CLK_MASK (1 << 8) + +/* Used by CM_WKUPAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_SYS_CLK_ALL_SHIFT 15 +#define OMAP54XX_CLKACTIVITY_SYS_CLK_ALL_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_SYS_CLK_ALL_MASK (1 << 15) + +/* Used by CM_WKUPAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_SYS_CLK_FUNC_SHIFT 14 +#define OMAP54XX_CLKACTIVITY_SYS_CLK_FUNC_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_SYS_CLK_FUNC_MASK (1 << 14) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_TIMER10_GFCLK_SHIFT 9 +#define OMAP54XX_CLKACTIVITY_TIMER10_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_TIMER10_GFCLK_MASK (1 << 9) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_TIMER11_GFCLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_TIMER11_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_TIMER11_GFCLK_MASK (1 << 10) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_TIMER2_GFCLK_SHIFT 11 +#define OMAP54XX_CLKACTIVITY_TIMER2_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_TIMER2_GFCLK_MASK (1 << 11) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_TIMER3_GFCLK_SHIFT 12 +#define OMAP54XX_CLKACTIVITY_TIMER3_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_TIMER3_GFCLK_MASK (1 << 12) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_TIMER4_GFCLK_SHIFT 13 +#define OMAP54XX_CLKACTIVITY_TIMER4_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_TIMER4_GFCLK_MASK (1 << 13) + +/* Used by CM_L4PER_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_TIMER9_GFCLK_SHIFT 14 +#define OMAP54XX_CLKACTIVITY_TIMER9_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_TIMER9_GFCLK_MASK (1 << 14) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT 22 +#define OMAP54XX_CLKACTIVITY_TLL_CH0_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_TLL_CH0_GFCLK_MASK (1 << 22) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT 23 +#define OMAP54XX_CLKACTIVITY_TLL_CH1_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_TLL_CH1_GFCLK_MASK (1 << 23) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT 24 +#define OMAP54XX_CLKACTIVITY_TLL_CH2_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_TLL_CH2_GFCLK_MASK (1 << 24) + +/* Used by CM_MIPIEXT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_UNIPRO1_DPLL_CLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_UNIPRO1_DPLL_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_UNIPRO1_DPLL_CLK_MASK (1 << 10) + +/* Used by CM_MIPIEXT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_UNIPRO1_PHY_GFCLK_SHIFT 13 +#define OMAP54XX_CLKACTIVITY_UNIPRO1_PHY_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_UNIPRO1_PHY_GFCLK_MASK (1 << 13) + +/* Used by CM_MIPIEXT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_UNIPRO1_TXPHY_LS_GFCLK_SHIFT 12 +#define OMAP54XX_CLKACTIVITY_UNIPRO1_TXPHY_LS_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_UNIPRO1_TXPHY_LS_GFCLK_MASK (1 << 12) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_UNIPRO2_DPLL_CLK_SHIFT 10 +#define OMAP54XX_CLKACTIVITY_UNIPRO2_DPLL_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_UNIPRO2_DPLL_CLK_MASK (1 << 10) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_GFCLK_SHIFT 13 +#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_GFCLK_MASK (1 << 13) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_REF_GFCLK_SHIFT 5 +#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_REF_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_REF_GFCLK_MASK (1 << 5) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_USB_DPLL_CLK_SHIFT 14 +#define OMAP54XX_CLKACTIVITY_USB_DPLL_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_USB_DPLL_CLK_MASK (1 << 14) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT 15 +#define OMAP54XX_CLKACTIVITY_USB_DPLL_HS_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_USB_DPLL_HS_CLK_MASK (1 << 15) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_USB_OTG_SS_REF_CLK_SHIFT 31 +#define OMAP54XX_CLKACTIVITY_USB_OTG_SS_REF_CLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_USB_OTG_SS_REF_CLK_MASK (1 << 31) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT 30 +#define OMAP54XX_CLKACTIVITY_UTMI_P3_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_UTMI_P3_GFCLK_MASK (1 << 30) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT 25 +#define OMAP54XX_CLKACTIVITY_UTMI_ROOT_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK (1 << 25) + +/* Used by CM_WKUPAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_WKUPAON_32K_GFCLK_SHIFT 11 +#define OMAP54XX_CLKACTIVITY_WKUPAON_32K_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_WKUPAON_32K_GFCLK_MASK (1 << 11) + +/* Used by CM_WKUPAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_WKUPAON_GICLK_SHIFT 12 +#define OMAP54XX_CLKACTIVITY_WKUPAON_GICLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_WKUPAON_GICLK_MASK (1 << 12) + +/* Used by CM_WKUPAON_CLKSTCTRL */ +#define OMAP54XX_CLKACTIVITY_WKUPAON_IO_SRCOMP_GFCLK_SHIFT 13 +#define OMAP54XX_CLKACTIVITY_WKUPAON_IO_SRCOMP_GFCLK_WIDTH 0x1 +#define OMAP54XX_CLKACTIVITY_WKUPAON_IO_SRCOMP_GFCLK_MASK (1 << 13) + +/* Used by CM_COREAON_IO_SRCOMP_CLKCTRL, CM_WKUPAON_IO_SRCOMP_CLKCTRL */ +#define OMAP54XX_CLKEN_SRCOMP_FCLK_SHIFT 8 +#define OMAP54XX_CLKEN_SRCOMP_FCLK_WIDTH 0x1 +#define OMAP54XX_CLKEN_SRCOMP_FCLK_MASK (1 << 8) + +/* + * Used by CM_ABE_TIMER5_CLKCTRL, CM_ABE_TIMER6_CLKCTRL, CM_ABE_TIMER7_CLKCTRL, + * CM_ABE_TIMER8_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L4PER_TIMER10_CLKCTRL, + * CM_L4PER_TIMER11_CLKCTRL, CM_L4PER_TIMER2_CLKCTRL, CM_L4PER_TIMER3_CLKCTRL, + * CM_L4PER_TIMER4_CLKCTRL, CM_L4PER_TIMER9_CLKCTRL, CM_WKUPAON_TIMER1_CLKCTRL + */ +#define OMAP54XX_CLKSEL_SHIFT 24 +#define OMAP54XX_CLKSEL_WIDTH 0x1 +#define OMAP54XX_CLKSEL_MASK (1 << 24) + +/* + * Renamed from CLKSEL Used by CM_CLKSEL_ABE_DSS_SYS, CM_CLKSEL_ABE_PLL_REF, + * CM_CLKSEL_USB_60MHZ, CM_CLKSEL_WKUPAON + */ +#define OMAP54XX_CLKSEL_0_0_SHIFT 0 +#define OMAP54XX_CLKSEL_0_0_WIDTH 0x1 +#define OMAP54XX_CLKSEL_0_0_MASK (1 << 0) + +/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */ +#define OMAP54XX_CLKSEL_0_1_SHIFT 0 +#define OMAP54XX_CLKSEL_0_1_WIDTH 0x2 +#define OMAP54XX_CLKSEL_0_1_MASK (0x3 << 0) + +/* Renamed from CLKSEL Used by CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL */ +#define OMAP54XX_CLKSEL_24_25_SHIFT 24 +#define OMAP54XX_CLKSEL_24_25_WIDTH 0x2 +#define OMAP54XX_CLKSEL_24_25_MASK (0x3 << 24) + +/* Used by CM_MPU_MPU_CLKCTRL */ +#define OMAP54XX_CLKSEL_ABE_DIV_MODE_SHIFT 26 +#define OMAP54XX_CLKSEL_ABE_DIV_MODE_WIDTH 0x1 +#define OMAP54XX_CLKSEL_ABE_DIV_MODE_MASK (1 << 26) + +/* Used by CM_ABE_AESS_CLKCTRL */ +#define OMAP54XX_CLKSEL_AESS_FCLK_SHIFT 24 +#define OMAP54XX_CLKSEL_AESS_FCLK_WIDTH 0x1 +#define OMAP54XX_CLKSEL_AESS_FCLK_MASK (1 << 24) + +/* Used by CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL */ +#define OMAP54XX_CLKSEL_DIV_SHIFT 25 +#define OMAP54XX_CLKSEL_DIV_WIDTH 0x1 +#define OMAP54XX_CLKSEL_DIV_MASK (1 << 25) + +/* Used by CM_MPU_MPU_CLKCTRL */ +#define OMAP54XX_CLKSEL_EMIF_DIV_MODE_SHIFT 24 +#define OMAP54XX_CLKSEL_EMIF_DIV_MODE_WIDTH 0x2 +#define OMAP54XX_CLKSEL_EMIF_DIV_MODE_MASK (0x3 << 24) + +/* Used by CM_CAM_FDIF_CLKCTRL */ +#define OMAP54XX_CLKSEL_FCLK_SHIFT 24 +#define OMAP54XX_CLKSEL_FCLK_WIDTH 0x1 +#define OMAP54XX_CLKSEL_FCLK_MASK (1 << 24) + +/* Used by CM_GPU_GPU_CLKCTRL */ +#define OMAP54XX_CLKSEL_GPU_CORE_GCLK_SHIFT 24 +#define OMAP54XX_CLKSEL_GPU_CORE_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKSEL_GPU_CORE_GCLK_MASK (1 << 24) + +/* Used by CM_GPU_GPU_CLKCTRL */ +#define OMAP54XX_CLKSEL_GPU_HYD_GCLK_SHIFT 25 +#define OMAP54XX_CLKSEL_GPU_HYD_GCLK_WIDTH 0x1 +#define OMAP54XX_CLKSEL_GPU_HYD_GCLK_MASK (1 << 25) + +/* Used by CM_GPU_GPU_CLKCTRL */ +#define OMAP54XX_CLKSEL_GPU_SYS_CLK_SHIFT 26 +#define OMAP54XX_CLKSEL_GPU_SYS_CLK_WIDTH 0x1 +#define OMAP54XX_CLKSEL_GPU_SYS_CLK_MASK (1 << 26) + +/* + * Used by CM_ABE_DMIC_CLKCTRL, CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL, + * CM_ABE_MCBSP2_CLKCTRL, CM_ABE_MCBSP3_CLKCTRL + */ +#define OMAP54XX_CLKSEL_INTERNAL_SOURCE_SHIFT 26 +#define OMAP54XX_CLKSEL_INTERNAL_SOURCE_WIDTH 0x2 +#define OMAP54XX_CLKSEL_INTERNAL_SOURCE_MASK (0x3 << 26) + +/* Used by CM_CLKSEL_CORE */ +#define OMAP54XX_CLKSEL_L3_SHIFT 4 +#define OMAP54XX_CLKSEL_L3_WIDTH 0x1 +#define OMAP54XX_CLKSEL_L3_MASK (1 << 4) + +/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP54XX_CLKSEL_L3_1_1_SHIFT 1 +#define OMAP54XX_CLKSEL_L3_1_1_WIDTH 0x1 +#define OMAP54XX_CLKSEL_L3_1_1_MASK (1 << 1) + +/* Used by CM_CLKSEL_CORE */ +#define OMAP54XX_CLKSEL_L4_SHIFT 8 +#define OMAP54XX_CLKSEL_L4_WIDTH 0x1 +#define OMAP54XX_CLKSEL_L4_MASK (1 << 8) + +/* Used by CM_EMIF_EMIF1_CLKCTRL */ +#define OMAP54XX_CLKSEL_LL_SHIFT 24 +#define OMAP54XX_CLKSEL_LL_WIDTH 0x1 +#define OMAP54XX_CLKSEL_LL_MASK (1 << 24) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP54XX_CLKSEL_OPP_SHIFT 0 +#define OMAP54XX_CLKSEL_OPP_WIDTH 0x2 +#define OMAP54XX_CLKSEL_OPP_MASK (0x3 << 0) + +/* Renamed from CLKSEL_OPP Used by CM_L3INIT_UNIPRO2_CLKCTRL */ +#define OMAP54XX_CLKSEL_OPP_24_24_SHIFT 24 +#define OMAP54XX_CLKSEL_OPP_24_24_WIDTH 0x1 +#define OMAP54XX_CLKSEL_OPP_24_24_MASK (1 << 24) + +/* + * Used by CM_ABE_DMIC_CLKCTRL, CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL, + * CM_ABE_MCBSP2_CLKCTRL, CM_ABE_MCBSP3_CLKCTRL + */ +#define OMAP54XX_CLKSEL_SOURCE_SHIFT 24 +#define OMAP54XX_CLKSEL_SOURCE_WIDTH 0x2 +#define OMAP54XX_CLKSEL_SOURCE_MASK (0x3 << 24) + +/* + * Renamed from CLKSEL_SOURCE Used by CM_L3INIT_MMC1_CLKCTRL, + * CM_L3INIT_MMC2_CLKCTRL + */ +#define OMAP54XX_CLKSEL_SOURCE_L3INIT_MMC1_SHIFT 24 +#define OMAP54XX_CLKSEL_SOURCE_L3INIT_MMC1_WIDTH 0x1 +#define OMAP54XX_CLKSEL_SOURCE_L3INIT_MMC1_MASK (1 << 24) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_CLKSEL_UTMI_P1_SHIFT 24 +#define OMAP54XX_CLKSEL_UTMI_P1_WIDTH 0x1 +#define OMAP54XX_CLKSEL_UTMI_P1_MASK (1 << 24) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_CLKSEL_UTMI_P2_SHIFT 25 +#define OMAP54XX_CLKSEL_UTMI_P2_WIDTH 0x1 +#define OMAP54XX_CLKSEL_UTMI_P2_MASK (1 << 25) + +/* + * Used by CM_DIV_H11_DPLL_CORE, CM_DIV_H11_DPLL_IVA, CM_DIV_H11_DPLL_PER, + * CM_DIV_H12_DPLL_CORE, CM_DIV_H12_DPLL_IVA, CM_DIV_H12_DPLL_PER, + * CM_DIV_H13_DPLL_CORE, CM_DIV_H13_DPLL_PER, CM_DIV_H14_DPLL_CORE, + * CM_DIV_H14_DPLL_PER, CM_DIV_H21_DPLL_CORE, CM_DIV_H22_DPLL_CORE, + * CM_DIV_H23_DPLL_CORE, CM_DIV_H24_DPLL_CORE, CM_DIV_M2_DPLL_ABE, + * CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, + * CM_DIV_M2_DPLL_UNIPRO1, CM_DIV_M2_DPLL_UNIPRO2, CM_DIV_M2_DPLL_USB, + * CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER + */ +#define OMAP54XX_CLKST_SHIFT 9 +#define OMAP54XX_CLKST_WIDTH 0x1 +#define OMAP54XX_CLKST_MASK (1 << 9) + +/* + * Used by CM_ABE_CLKSTCTRL, CM_C2C_CLKSTCTRL, CM_CAM_CLKSTCTRL, + * CM_COREAON_CLKSTCTRL, CM_CUSTEFUSE_CLKSTCTRL, CM_DMA_CLKSTCTRL, + * CM_DSP_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_EMIF_CLKSTCTRL, CM_EMU_CLKSTCTRL, + * CM_GPU_CLKSTCTRL, CM_IPU_CLKSTCTRL, CM_IVA_CLKSTCTRL, CM_L3INIT_CLKSTCTRL, + * CM_L3INSTR_CLKSTCTRL, CM_L3MAIN1_CLKSTCTRL, CM_L3MAIN2_CLKSTCTRL, + * CM_L4CFG_CLKSTCTRL, CM_L4PER_CLKSTCTRL, CM_L4SEC_CLKSTCTRL, + * CM_MIPIEXT_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_WKUPAON_CLKSTCTRL + */ +#define OMAP54XX_CLKTRCTRL_SHIFT 0 +#define OMAP54XX_CLKTRCTRL_WIDTH 0x2 +#define OMAP54XX_CLKTRCTRL_MASK (0x3 << 0) + +/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER */ +#define OMAP54XX_CLKX2ST_SHIFT 11 +#define OMAP54XX_CLKX2ST_WIDTH 0x1 +#define OMAP54XX_CLKX2ST_MASK (1 << 11) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP54XX_COREAON_DYNDEP_SHIFT 16 +#define OMAP54XX_COREAON_DYNDEP_WIDTH 0x1 +#define OMAP54XX_COREAON_DYNDEP_MASK (1 << 16) + +/* Used by CM_DSP_STATICDEP, CM_IPU_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP54XX_COREAON_STATDEP_SHIFT 16 +#define OMAP54XX_COREAON_STATDEP_WIDTH 0x1 +#define OMAP54XX_COREAON_STATDEP_MASK (1 << 16) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP54XX_CUSTEFUSE_DYNDEP_SHIFT 17 +#define OMAP54XX_CUSTEFUSE_DYNDEP_WIDTH 0x1 +#define OMAP54XX_CUSTEFUSE_DYNDEP_MASK (1 << 17) + +/* Used by CM_DSP_STATICDEP, CM_IPU_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP54XX_CUSTEFUSE_STATDEP_SHIFT 17 +#define OMAP54XX_CUSTEFUSE_STATDEP_WIDTH 0x1 +#define OMAP54XX_CUSTEFUSE_STATDEP_MASK (1 << 17) + +/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */ +#define OMAP54XX_CUSTOM_SHIFT 6 +#define OMAP54XX_CUSTOM_WIDTH 0x2 +#define OMAP54XX_CUSTOM_MASK (0x3 << 6) + +/* + * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA, + * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO1, + * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB + */ +#define OMAP54XX_DCC_EN_SHIFT 22 +#define OMAP54XX_DCC_EN_WIDTH 0x1 +#define OMAP54XX_DCC_EN_MASK (1 << 22) + +/* + * Used by CM_CORE_AON_DEBUG_CM_CORE_AON_FD_TRANS, + * CM_CORE_AON_DEBUG_DSS_FD_TRANS, CM_CORE_AON_DEBUG_EMIF_FD_TRANS, + * CM_CORE_AON_DEBUG_L4SEC_FD_TRANS + */ +#define OMAP54XX_CM_DEBUG_OUT_SHIFT 0 +#define OMAP54XX_CM_DEBUG_OUT_WIDTH 0xd +#define OMAP54XX_CM_DEBUG_OUT_MASK (0x1fff << 0) + +/* + * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_ABE_FD_TRANS, + * CM_CORE_AON_DEBUG_L3INIT_FD_TRANS, CM_CORE_AON_DEBUG_L4PER_FD_TRANS + */ +#define OMAP54XX_DEBUG_OUT_0_31_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_31_WIDTH 0x20 +#define OMAP54XX_DEBUG_OUT_0_31_MASK (0xffffffff << 0) + +/* + * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_C2C_FD_TRANS, + * CM_CORE_AON_DEBUG_COREAON_FD_TRANS, CM_CORE_AON_DEBUG_L4CFG_FD_TRANS + */ +#define OMAP54XX_DEBUG_OUT_0_8_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_8_WIDTH 0x9 +#define OMAP54XX_DEBUG_OUT_0_8_MASK (0x1ff << 0) + +/* + * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_CUSTEFUSE_FD_TRANS, + * CM_CORE_AON_DEBUG_DMA_FD_TRANS, CM_CORE_AON_DEBUG_L3MAIN1_FD_TRANS + */ +#define OMAP54XX_DEBUG_OUT_0_4_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_4_WIDTH 0x5 +#define OMAP54XX_DEBUG_OUT_0_4_MASK (0x1f << 0) + +/* + * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_DSP_FD_TRANS, + * CM_CORE_AON_DEBUG_IPU_FD_TRANS, CM_CORE_AON_DEBUG_MPU_FD_TRANS + */ +#define OMAP54XX_DEBUG_OUT_0_5_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_5_WIDTH 0x6 +#define OMAP54XX_DEBUG_OUT_0_5_MASK (0x3f << 0) + +/* + * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_CAM_FD_TRANS, + * CM_CORE_AON_DEBUG_MIPIEXT_FD_TRANS + */ +#define OMAP54XX_DEBUG_OUT_0_10_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_10_WIDTH 0xb +#define OMAP54XX_DEBUG_OUT_0_10_MASK (0x7ff << 0) + +/* + * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_IVA_FD_TRANS, + * CM_CORE_AON_DEBUG_L3MAIN2_FD_TRANS + */ +#define OMAP54XX_DEBUG_OUT_0_6_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_6_WIDTH 0x7 +#define OMAP54XX_DEBUG_OUT_0_6_MASK (0x7f << 0) + +/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_ABE_FD_TRANS2 */ +#define OMAP54XX_DEBUG_OUT_0_19_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_19_WIDTH 0x14 +#define OMAP54XX_DEBUG_OUT_0_19_MASK (0xfffff << 0) + +/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_GPU_FD_TRANS */ +#define OMAP54XX_DEBUG_OUT_0_9_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_9_WIDTH 0xa +#define OMAP54XX_DEBUG_OUT_0_9_MASK (0x3ff << 0) + +/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_L3INIT_FD_TRANS2 */ +#define OMAP54XX_DEBUG_OUT_0_26_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_26_WIDTH 0x1b +#define OMAP54XX_DEBUG_OUT_0_26_MASK (0x7ffffff << 0) + +/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_L3INSTR_FD_TRANS */ +#define OMAP54XX_DEBUG_OUT_0_13_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_13_WIDTH 0xe +#define OMAP54XX_DEBUG_OUT_0_13_MASK (0x3fff << 0) + +/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_L4PER_FD_TRANS2 */ +#define OMAP54XX_DEBUG_OUT_0_21_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_21_WIDTH 0x16 +#define OMAP54XX_DEBUG_OUT_0_21_MASK (0x3fffff << 0) + +/* + * Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE, + * CM_SSC_DELTAMSTEP_DPLL_IVA, CM_SSC_DELTAMSTEP_DPLL_MPU, + * CM_SSC_DELTAMSTEP_DPLL_PER + */ +#define OMAP54XX_DELTAMSTEP_SHIFT 0 +#define OMAP54XX_DELTAMSTEP_WIDTH 0x14 +#define OMAP54XX_DELTAMSTEP_MASK (0xfffff << 0) + +/* + * Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_UNIPRO1, + * CM_SSC_DELTAMSTEP_DPLL_UNIPRO2, CM_SSC_DELTAMSTEP_DPLL_USB + */ +#define OMAP54XX_DELTAMSTEP_0_20_SHIFT 0 +#define OMAP54XX_DELTAMSTEP_0_20_WIDTH 0x15 +#define OMAP54XX_DELTAMSTEP_0_20_MASK (0x1fffff << 0) + +/* + * Used by CM_DIV_H11_DPLL_CORE, CM_DIV_H11_DPLL_IVA, CM_DIV_H11_DPLL_PER, + * CM_DIV_H12_DPLL_CORE, CM_DIV_H12_DPLL_IVA, CM_DIV_H12_DPLL_PER, + * CM_DIV_H13_DPLL_CORE, CM_DIV_H13_DPLL_PER, CM_DIV_H14_DPLL_CORE, + * CM_DIV_H14_DPLL_PER, CM_DIV_H21_DPLL_CORE, CM_DIV_H22_DPLL_CORE, + * CM_DIV_H23_DPLL_CORE, CM_DIV_H24_DPLL_CORE + */ +#define OMAP54XX_DIVHS_SHIFT 0 +#define OMAP54XX_DIVHS_WIDTH 0x6 +#define OMAP54XX_DIVHS_MASK (0x3f << 0) + +/* + * Renamed from DIVHS Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER + */ +#define OMAP54XX_DIVHS_0_4_SHIFT 0 +#define OMAP54XX_DIVHS_0_4_WIDTH 0x5 +#define OMAP54XX_DIVHS_0_4_MASK (0x1f << 0) + +/* + * Renamed from DIVHS Used by CM_DIV_M2_DPLL_UNIPRO1, CM_DIV_M2_DPLL_UNIPRO2, + * CM_DIV_M2_DPLL_USB + */ +#define OMAP54XX_DIVHS_0_6_SHIFT 0 +#define OMAP54XX_DIVHS_0_6_WIDTH 0x7 +#define OMAP54XX_DIVHS_0_6_MASK (0x7f << 0) + +/* Used by CM_DLL_CTRL */ +#define OMAP54XX_DLL_OVERRIDE_SHIFT 0 +#define OMAP54XX_DLL_OVERRIDE_WIDTH 0x1 +#define OMAP54XX_DLL_OVERRIDE_MASK (1 << 0) + +/* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP54XX_DLL_OVERRIDE_2_2_SHIFT 2 +#define OMAP54XX_DLL_OVERRIDE_2_2_WIDTH 0x1 +#define OMAP54XX_DLL_OVERRIDE_2_2_MASK (1 << 2) + +/* Used by CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP54XX_DLL_RESET_SHIFT 3 +#define OMAP54XX_DLL_RESET_WIDTH 0x1 +#define OMAP54XX_DLL_RESET_MASK (1 << 3) + +/* + * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA, + * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO1, + * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB + */ +#define OMAP54XX_DPLL_BYP_CLKSEL_SHIFT 23 +#define OMAP54XX_DPLL_BYP_CLKSEL_WIDTH 0x1 +#define OMAP54XX_DPLL_BYP_CLKSEL_MASK (1 << 23) + +/* Used by CM_CLKSEL_DPLL_CORE */ +#define OMAP54XX_DPLL_CLKOUTHIF_CLKSEL_SHIFT 20 +#define OMAP54XX_DPLL_CLKOUTHIF_CLKSEL_WIDTH 0x1 +#define OMAP54XX_DPLL_CLKOUTHIF_CLKSEL_MASK (1 << 20) + +/* Used by CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP54XX_DPLL_CORE_DPLL_EN_SHIFT 8 +#define OMAP54XX_DPLL_CORE_DPLL_EN_WIDTH 0x3 +#define OMAP54XX_DPLL_CORE_DPLL_EN_MASK (0x7 << 8) + +/* Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP54XX_DPLL_CORE_H12_DIV_SHIFT 2 +#define OMAP54XX_DPLL_CORE_H12_DIV_WIDTH 0x6 +#define OMAP54XX_DPLL_CORE_H12_DIV_MASK (0x3f << 2) + +/* Used by CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP54XX_DPLL_CORE_M2_DIV_SHIFT 11 +#define OMAP54XX_DPLL_CORE_M2_DIV_WIDTH 0x5 +#define OMAP54XX_DPLL_CORE_M2_DIV_MASK (0x1f << 11) + +/* + * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA, + * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER + */ +#define OMAP54XX_DPLL_DIV_SHIFT 0 +#define OMAP54XX_DPLL_DIV_WIDTH 0x7 +#define OMAP54XX_DPLL_DIV_MASK (0x7f << 0) + +/* + * Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_UNIPRO1, + * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB + */ +#define OMAP54XX_DPLL_DIV_0_7_SHIFT 0 +#define OMAP54XX_DPLL_DIV_0_7_WIDTH 0x8 +#define OMAP54XX_DPLL_DIV_0_7_MASK (0xff << 0) + +/* + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define OMAP54XX_DPLL_DRIFTGUARD_EN_SHIFT 8 +#define OMAP54XX_DPLL_DRIFTGUARD_EN_WIDTH 0x1 +#define OMAP54XX_DPLL_DRIFTGUARD_EN_MASK (1 << 8) + +/* + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1, + * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB + */ +#define OMAP54XX_DPLL_EN_SHIFT 0 +#define OMAP54XX_DPLL_EN_WIDTH 0x3 +#define OMAP54XX_DPLL_EN_MASK (0x7 << 0) + +/* + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define OMAP54XX_DPLL_LPMODE_EN_SHIFT 10 +#define OMAP54XX_DPLL_LPMODE_EN_WIDTH 0x1 +#define OMAP54XX_DPLL_LPMODE_EN_MASK (1 << 10) + +/* + * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA, + * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER + */ +#define OMAP54XX_DPLL_MULT_SHIFT 8 +#define OMAP54XX_DPLL_MULT_WIDTH 0xb +#define OMAP54XX_DPLL_MULT_MASK (0x7ff << 8) + +/* + * Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_UNIPRO1, + * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB + */ +#define OMAP54XX_DPLL_MULT_UNIPRO1_SHIFT 8 +#define OMAP54XX_DPLL_MULT_UNIPRO1_WIDTH 0xc +#define OMAP54XX_DPLL_MULT_UNIPRO1_MASK (0xfff << 8) + +/* + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define OMAP54XX_DPLL_REGM4XEN_SHIFT 11 +#define OMAP54XX_DPLL_REGM4XEN_WIDTH 0x1 +#define OMAP54XX_DPLL_REGM4XEN_MASK (1 << 11) + +/* Used by CM_CLKSEL_DPLL_UNIPRO1, CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB */ +#define OMAP54XX_DPLL_SD_DIV_SHIFT 24 +#define OMAP54XX_DPLL_SD_DIV_WIDTH 0x8 +#define OMAP54XX_DPLL_SD_DIV_MASK (0xff << 24) + +/* Used by CM_CLKSEL_DPLL_UNIPRO1, CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB */ +#define OMAP54XX_DPLL_SELFREQDCO_SHIFT 21 +#define OMAP54XX_DPLL_SELFREQDCO_WIDTH 0x1 +#define OMAP54XX_DPLL_SELFREQDCO_MASK (1 << 21) + +/* + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1, + * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB + */ +#define OMAP54XX_DPLL_SSC_ACK_SHIFT 13 +#define OMAP54XX_DPLL_SSC_ACK_WIDTH 0x1 +#define OMAP54XX_DPLL_SSC_ACK_MASK (1 << 13) + +/* + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1, + * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB + */ +#define OMAP54XX_DPLL_SSC_DOWNSPREAD_SHIFT 14 +#define OMAP54XX_DPLL_SSC_DOWNSPREAD_WIDTH 0x1 +#define OMAP54XX_DPLL_SSC_DOWNSPREAD_MASK (1 << 14) + +/* + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1, + * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB + */ +#define OMAP54XX_DPLL_SSC_EN_SHIFT 12 +#define OMAP54XX_DPLL_SSC_EN_WIDTH 0x1 +#define OMAP54XX_DPLL_SSC_EN_MASK (1 << 12) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP54XX_DSP_DYNDEP_SHIFT 1 +#define OMAP54XX_DSP_DYNDEP_WIDTH 0x1 +#define OMAP54XX_DSP_DYNDEP_MASK (1 << 1) + +/* Used by CM_IPU_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP54XX_DSP_STATDEP_SHIFT 1 +#define OMAP54XX_DSP_STATDEP_WIDTH 0x1 +#define OMAP54XX_DSP_STATDEP_MASK (1 << 1) + +/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP54XX_DSS_DYNDEP_SHIFT 8 +#define OMAP54XX_DSS_DYNDEP_WIDTH 0x1 +#define OMAP54XX_DSS_DYNDEP_MASK (1 << 8) + +/* Used by CM_DMA_STATICDEP, CM_IPU_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP54XX_DSS_STATDEP_SHIFT 8 +#define OMAP54XX_DSS_STATDEP_WIDTH 0x1 +#define OMAP54XX_DSS_STATDEP_MASK (1 << 8) + +/* + * Used by CM_C2C_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, + * CM_MIPIEXT_DYNAMICDEP, CM_MPU_DYNAMICDEP + */ +#define OMAP54XX_EMIF_DYNDEP_SHIFT 4 +#define OMAP54XX_EMIF_DYNDEP_WIDTH 0x1 +#define OMAP54XX_EMIF_DYNDEP_MASK (1 << 4) + +/* + * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP, + * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP, + * CM_IVA_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, + * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP + */ +#define OMAP54XX_EMIF_STATDEP_SHIFT 4 +#define OMAP54XX_EMIF_STATDEP_WIDTH 0x1 +#define OMAP54XX_EMIF_STATDEP_MASK (1 << 4) + +/* Used by CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP54XX_FREQ_UPDATE_SHIFT 0 +#define OMAP54XX_FREQ_UPDATE_WIDTH 0x1 +#define OMAP54XX_FREQ_UPDATE_MASK (1 << 0) + +/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */ +#define OMAP54XX_FUNC_SHIFT 16 +#define OMAP54XX_FUNC_WIDTH 0xc +#define OMAP54XX_FUNC_MASK (0xfff << 16) + +/* Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP54XX_GPMC_FREQ_UPDATE_SHIFT 0 +#define OMAP54XX_GPMC_FREQ_UPDATE_WIDTH 0x1 +#define OMAP54XX_GPMC_FREQ_UPDATE_MASK (1 << 0) + +/* Used by CM_L3MAIN2_DYNAMICDEP */ +#define OMAP54XX_GPU_DYNDEP_SHIFT 10 +#define OMAP54XX_GPU_DYNDEP_WIDTH 0x1 +#define OMAP54XX_GPU_DYNDEP_MASK (1 << 10) + +/* Used by CM_IPU_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP54XX_GPU_STATDEP_SHIFT 10 +#define OMAP54XX_GPU_STATDEP_WIDTH 0x1 +#define OMAP54XX_GPU_STATDEP_MASK (1 << 10) + +/* + * Used by CM_ABE_AESS_CLKCTRL, CM_ABE_DMIC_CLKCTRL, CM_ABE_L4_ABE_CLKCTRL, + * CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL, CM_ABE_MCBSP2_CLKCTRL, + * CM_ABE_MCBSP3_CLKCTRL, CM_ABE_MCPDM_CLKCTRL, CM_ABE_SLIMBUS1_CLKCTRL, + * CM_ABE_TIMER5_CLKCTRL, CM_ABE_TIMER6_CLKCTRL, CM_ABE_TIMER7_CLKCTRL, + * CM_ABE_TIMER8_CLKCTRL, CM_ABE_WD_TIMER3_CLKCTRL, CM_C2C_C2C_CLKCTRL, + * CM_C2C_C2C_OCP_FW_CLKCTRL, CM_C2C_MODEM_ICR_CLKCTRL, CM_CAM_CAL_CLKCTRL, + * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CM_CORE_AON_PROFILING_CLKCTRL, + * CM_CM_CORE_PROFILING_CLKCTRL, CM_COREAON_SMARTREFLEX_CORE_CLKCTRL, + * CM_COREAON_SMARTREFLEX_MM_CLKCTRL, CM_COREAON_SMARTREFLEX_MPU_CLKCTRL, + * CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL, CM_DMA_DMA_SYSTEM_CLKCTRL, + * CM_DSP_DSP_CLKCTRL, CM_DSS_BB2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, + * CM_EMIF_DMM_CLKCTRL, CM_EMIF_EMIF1_CLKCTRL, CM_EMIF_EMIF2_CLKCTRL, + * CM_EMIF_EMIF_OCP_FW_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, + * CM_EMU_MPU_EMU_DBG_CLKCTRL, CM_GPU_GPU_CLKCTRL, CM_IPU_IPU_CLKCTRL, + * CM_IVA_IVA_CLKCTRL, CM_IVA_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, + * CM_L3INIT_IEEE1500_2_OCP_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, + * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MPHY_UNIPRO2_CLKCTRL, + * CM_L3INIT_OCP2SCP1_CLKCTRL, CM_L3INIT_OCP2SCP3_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_UNIPRO2_CLKCTRL, + * CM_L3INIT_USB_HOST_HS_CLKCTRL, CM_L3INIT_USB_OTG_SS_CLKCTRL, + * CM_L3INIT_USB_TLL_HS_CLKCTRL, CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL, + * CM_L3INSTR_DLL_AGING_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, + * CM_L3INSTR_L3_MAIN_3_CLKCTRL, CM_L3INSTR_OCP_WP_NOC_CLKCTRL, + * CM_L3MAIN1_L3_MAIN_1_CLKCTRL, CM_L3MAIN2_GPMC_CLKCTRL, + * CM_L3MAIN2_L3_MAIN_2_CLKCTRL, CM_L3MAIN2_OCMC_RAM_CLKCTRL, + * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, + * CM_L4CFG_OCP2SCP2_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, + * CM_L4CFG_SPINLOCK_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO7_CLKCTRL, CM_L4PER_GPIO8_CLKCTRL, + * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, + * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, + * CM_L4PER_L4_PER_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, + * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMC3_CLKCTRL, + * CM_L4PER_MMC4_CLKCTRL, CM_L4PER_MMC5_CLKCTRL, CM_L4PER_TIMER10_CLKCTRL, + * CM_L4PER_TIMER11_CLKCTRL, CM_L4PER_TIMER2_CLKCTRL, CM_L4PER_TIMER3_CLKCTRL, + * CM_L4PER_TIMER4_CLKCTRL, CM_L4PER_TIMER9_CLKCTRL, CM_L4PER_UART1_CLKCTRL, + * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, + * CM_L4PER_UART5_CLKCTRL, CM_L4PER_UART6_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, + * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL, + * CM_L4SEC_DMA_CRYPTO_CLKCTRL, CM_L4SEC_FPKA_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, + * CM_L4SEC_SHA2MD5_CLKCTRL, CM_MIPIEXT_LLI_CLKCTRL, + * CM_MIPIEXT_LLI_OCP_FW_CLKCTRL, CM_MIPIEXT_MPHY_CLKCTRL, CM_MPU_MPU_CLKCTRL, + * CM_MPU_MPU_MPU_DBG_CLKCTRL, CM_WKUPAON_COUNTER_32K_CLKCTRL, + * CM_WKUPAON_GPIO1_CLKCTRL, CM_WKUPAON_KBD_CLKCTRL, + * CM_WKUPAON_L4_WKUP_CLKCTRL, CM_WKUPAON_SAR_RAM_CLKCTRL, + * CM_WKUPAON_TIMER12_CLKCTRL, CM_WKUPAON_TIMER1_CLKCTRL, + * CM_WKUPAON_WD_TIMER1_CLKCTRL, CM_WKUPAON_WD_TIMER2_CLKCTRL + */ +#define OMAP54XX_IDLEST_SHIFT 16 +#define OMAP54XX_IDLEST_WIDTH 0x2 +#define OMAP54XX_IDLEST_MASK (0x3 << 16) + +/* Used by CM_L3MAIN2_DYNAMICDEP */ +#define OMAP54XX_IPU_DYNDEP_SHIFT 0 +#define OMAP54XX_IPU_DYNDEP_WIDTH 0x1 +#define OMAP54XX_IPU_DYNDEP_MASK (1 << 0) + +/* Used by CM_DMA_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP54XX_IPU_STATDEP_SHIFT 0 +#define OMAP54XX_IPU_STATDEP_WIDTH 0x1 +#define OMAP54XX_IPU_STATDEP_MASK (1 << 0) + +/* Used by CM_DSP_DYNAMICDEP, CM_L3MAIN2_DYNAMICDEP */ +#define OMAP54XX_IVA_DYNDEP_SHIFT 2 +#define OMAP54XX_IVA_DYNDEP_WIDTH 0x1 +#define OMAP54XX_IVA_DYNDEP_MASK (1 << 2) + +/* + * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP, + * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP, + * CM_L3INIT_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP + */ +#define OMAP54XX_IVA_STATDEP_SHIFT 2 +#define OMAP54XX_IVA_STATDEP_WIDTH 0x1 +#define OMAP54XX_IVA_STATDEP_MASK (1 << 2) + +/* Used by CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP54XX_L3INIT_DYNDEP_SHIFT 7 +#define OMAP54XX_L3INIT_DYNDEP_WIDTH 0x1 +#define OMAP54XX_L3INIT_DYNDEP_MASK (1 << 7) + +/* + * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP, + * CM_IPU_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP + */ +#define OMAP54XX_L3INIT_STATDEP_SHIFT 7 +#define OMAP54XX_L3INIT_STATDEP_WIDTH 0x1 +#define OMAP54XX_L3INIT_STATDEP_MASK (1 << 7) + +/* + * Used by CM_DSP_DYNAMICDEP, CM_DSS_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, + * CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP + */ +#define OMAP54XX_L3MAIN1_DYNDEP_SHIFT 5 +#define OMAP54XX_L3MAIN1_DYNDEP_WIDTH 0x1 +#define OMAP54XX_L3MAIN1_DYNDEP_MASK (1 << 5) + +/* + * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP, + * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP, + * CM_IVA_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, + * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP + */ +#define OMAP54XX_L3MAIN1_STATDEP_SHIFT 5 +#define OMAP54XX_L3MAIN1_STATDEP_WIDTH 0x1 +#define OMAP54XX_L3MAIN1_STATDEP_MASK (1 << 5) + +/* + * Used by CM_C2C_DYNAMICDEP, CM_CAM_DYNAMICDEP, CM_DMA_DYNAMICDEP, + * CM_DSS_DYNAMICDEP, CM_EMU_DYNAMICDEP, CM_GPU_DYNAMICDEP, CM_IPU_DYNAMICDEP, + * CM_IVA_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP, + * CM_L4CFG_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_MIPIEXT_DYNAMICDEP + */ +#define OMAP54XX_L3MAIN2_DYNDEP_SHIFT 6 +#define OMAP54XX_L3MAIN2_DYNDEP_WIDTH 0x1 +#define OMAP54XX_L3MAIN2_DYNDEP_MASK (1 << 6) + +/* + * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP, + * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP, + * CM_IVA_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, + * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP + */ +#define OMAP54XX_L3MAIN2_STATDEP_SHIFT 6 +#define OMAP54XX_L3MAIN2_STATDEP_WIDTH 0x1 +#define OMAP54XX_L3MAIN2_STATDEP_MASK (1 << 6) + +/* Used by CM_L3MAIN1_DYNAMICDEP */ +#define OMAP54XX_L4CFG_DYNDEP_SHIFT 12 +#define OMAP54XX_L4CFG_DYNDEP_WIDTH 0x1 +#define OMAP54XX_L4CFG_DYNDEP_MASK (1 << 12) + +/* + * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP, + * CM_IPU_STATICDEP, CM_L3INIT_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP + */ +#define OMAP54XX_L4CFG_STATDEP_SHIFT 12 +#define OMAP54XX_L4CFG_STATDEP_WIDTH 0x1 +#define OMAP54XX_L4CFG_STATDEP_MASK (1 << 12) + +/* Used by CM_L3MAIN2_DYNAMICDEP */ +#define OMAP54XX_L4PER_DYNDEP_SHIFT 13 +#define OMAP54XX_L4PER_DYNDEP_WIDTH 0x1 +#define OMAP54XX_L4PER_DYNDEP_MASK (1 << 13) + +/* + * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP, + * CM_IPU_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, + * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP + */ +#define OMAP54XX_L4PER_STATDEP_SHIFT 13 +#define OMAP54XX_L4PER_STATDEP_WIDTH 0x1 +#define OMAP54XX_L4PER_STATDEP_MASK (1 << 13) + +/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP54XX_L4SEC_DYNDEP_SHIFT 14 +#define OMAP54XX_L4SEC_DYNDEP_WIDTH 0x1 +#define OMAP54XX_L4SEC_DYNDEP_MASK (1 << 14) + +/* + * Used by CM_DMA_STATICDEP, CM_IPU_STATICDEP, CM_L3INIT_STATICDEP, + * CM_MPU_STATICDEP + */ +#define OMAP54XX_L4SEC_STATDEP_SHIFT 14 +#define OMAP54XX_L4SEC_STATDEP_WIDTH 0x1 +#define OMAP54XX_L4SEC_STATDEP_MASK (1 << 14) + +/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +#define OMAP54XX_MIPIEXT_DYNDEP_SHIFT 21 +#define OMAP54XX_MIPIEXT_DYNDEP_WIDTH 0x1 +#define OMAP54XX_MIPIEXT_DYNDEP_MASK (1 << 21) + +/* Used by CM_MPU_STATICDEP */ +#define OMAP54XX_MIPIEXT_STATDEP_SHIFT 21 +#define OMAP54XX_MIPIEXT_STATDEP_WIDTH 0x1 +#define OMAP54XX_MIPIEXT_STATDEP_MASK (1 << 21) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, + * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU, + * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO1, + * CM_SSC_MODFREQDIV_DPLL_UNIPRO2, CM_SSC_MODFREQDIV_DPLL_USB + */ +#define OMAP54XX_MODFREQDIV_EXPONENT_SHIFT 8 +#define OMAP54XX_MODFREQDIV_EXPONENT_WIDTH 0x3 +#define OMAP54XX_MODFREQDIV_EXPONENT_MASK (0x7 << 8) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, + * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU, + * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO1, + * CM_SSC_MODFREQDIV_DPLL_UNIPRO2, CM_SSC_MODFREQDIV_DPLL_USB + */ +#define OMAP54XX_MODFREQDIV_MANTISSA_SHIFT 0 +#define OMAP54XX_MODFREQDIV_MANTISSA_WIDTH 0x7 +#define OMAP54XX_MODFREQDIV_MANTISSA_MASK (0x7f << 0) + +/* + * Used by CM_ABE_AESS_CLKCTRL, CM_ABE_DMIC_CLKCTRL, CM_ABE_L4_ABE_CLKCTRL, + * CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL, CM_ABE_MCBSP2_CLKCTRL, + * CM_ABE_MCBSP3_CLKCTRL, CM_ABE_MCPDM_CLKCTRL, CM_ABE_SLIMBUS1_CLKCTRL, + * CM_ABE_TIMER5_CLKCTRL, CM_ABE_TIMER6_CLKCTRL, CM_ABE_TIMER7_CLKCTRL, + * CM_ABE_TIMER8_CLKCTRL, CM_ABE_WD_TIMER3_CLKCTRL, CM_C2C_C2C_CLKCTRL, + * CM_C2C_C2C_OCP_FW_CLKCTRL, CM_C2C_MODEM_ICR_CLKCTRL, CM_CAM_CAL_CLKCTRL, + * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CM_CORE_AON_PROFILING_CLKCTRL, + * CM_CM_CORE_PROFILING_CLKCTRL, CM_COREAON_SMARTREFLEX_CORE_CLKCTRL, + * CM_COREAON_SMARTREFLEX_MM_CLKCTRL, CM_COREAON_SMARTREFLEX_MPU_CLKCTRL, + * CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL, CM_DMA_DMA_SYSTEM_CLKCTRL, + * CM_DSP_DSP_CLKCTRL, CM_DSS_BB2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, + * CM_EMIF_DMM_CLKCTRL, CM_EMIF_EMIF1_CLKCTRL, CM_EMIF_EMIF2_CLKCTRL, + * CM_EMIF_EMIF_OCP_FW_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, + * CM_EMU_MPU_EMU_DBG_CLKCTRL, CM_GPU_GPU_CLKCTRL, CM_IPU_IPU_CLKCTRL, + * CM_IVA_IVA_CLKCTRL, CM_IVA_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, + * CM_L3INIT_IEEE1500_2_OCP_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, + * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MPHY_UNIPRO2_CLKCTRL, + * CM_L3INIT_OCP2SCP1_CLKCTRL, CM_L3INIT_OCP2SCP3_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_UNIPRO2_CLKCTRL, + * CM_L3INIT_USB_HOST_HS_CLKCTRL, CM_L3INIT_USB_OTG_SS_CLKCTRL, + * CM_L3INIT_USB_TLL_HS_CLKCTRL, CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL, + * CM_L3INSTR_DLL_AGING_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, + * CM_L3INSTR_L3_MAIN_3_CLKCTRL, CM_L3INSTR_OCP_WP_NOC_CLKCTRL, + * CM_L3MAIN1_L3_MAIN_1_CLKCTRL, CM_L3MAIN2_GPMC_CLKCTRL, + * CM_L3MAIN2_L3_MAIN_2_CLKCTRL, CM_L3MAIN2_OCMC_RAM_CLKCTRL, + * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, + * CM_L4CFG_OCP2SCP2_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, + * CM_L4CFG_SPINLOCK_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO7_CLKCTRL, CM_L4PER_GPIO8_CLKCTRL, + * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, + * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, + * CM_L4PER_L4_PER_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, + * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMC3_CLKCTRL, + * CM_L4PER_MMC4_CLKCTRL, CM_L4PER_MMC5_CLKCTRL, CM_L4PER_TIMER10_CLKCTRL, + * CM_L4PER_TIMER11_CLKCTRL, CM_L4PER_TIMER2_CLKCTRL, CM_L4PER_TIMER3_CLKCTRL, + * CM_L4PER_TIMER4_CLKCTRL, CM_L4PER_TIMER9_CLKCTRL, CM_L4PER_UART1_CLKCTRL, + * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, + * CM_L4PER_UART5_CLKCTRL, CM_L4PER_UART6_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, + * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL, + * CM_L4SEC_DMA_CRYPTO_CLKCTRL, CM_L4SEC_FPKA_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, + * CM_L4SEC_SHA2MD5_CLKCTRL, CM_MIPIEXT_LLI_CLKCTRL, + * CM_MIPIEXT_LLI_OCP_FW_CLKCTRL, CM_MIPIEXT_MPHY_CLKCTRL, CM_MPU_MPU_CLKCTRL, + * CM_MPU_MPU_MPU_DBG_CLKCTRL, CM_WKUPAON_COUNTER_32K_CLKCTRL, + * CM_WKUPAON_GPIO1_CLKCTRL, CM_WKUPAON_KBD_CLKCTRL, + * CM_WKUPAON_L4_WKUP_CLKCTRL, CM_WKUPAON_SAR_RAM_CLKCTRL, + * CM_WKUPAON_TIMER12_CLKCTRL, CM_WKUPAON_TIMER1_CLKCTRL, + * CM_WKUPAON_WD_TIMER1_CLKCTRL, CM_WKUPAON_WD_TIMER2_CLKCTRL + */ +#define OMAP54XX_MODULEMODE_SHIFT 0 +#define OMAP54XX_MODULEMODE_WIDTH 0x2 +#define OMAP54XX_MODULEMODE_MASK (0x3 << 0) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP54XX_MPU_DYNDEP_SHIFT 19 +#define OMAP54XX_MPU_DYNDEP_WIDTH 0x1 +#define OMAP54XX_MPU_DYNDEP_MASK (1 << 19) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_SHIFT 11 +#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_MASK (1 << 11) + +/* Renamed from OPTFCLKEN_32KHZ_CLK Used by CM_L3INIT_MMC1_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_8_8_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_8_8_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_8_8_MASK (1 << 8) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_48MHZ_CLK_SHIFT 9 +#define OMAP54XX_OPTFCLKEN_48MHZ_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_48MHZ_CLK_MASK (1 << 9) + +/* Used by CM_COREAON_USB_PHY_CORE_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_CLK32K_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_CLK32K_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_CLK32K_MASK (1 << 8) + +/* Used by CM_CAM_ISS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_CTRLCLK_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_CTRLCLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_CTRLCLK_MASK (1 << 8) + +/* + * Used by CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, + * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, + * CM_L4PER_GPIO7_CLKCTRL, CM_L4PER_GPIO8_CLKCTRL, CM_WKUPAON_GPIO1_CLKCTRL + */ +#define OMAP54XX_OPTFCLKEN_DBCLK_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_DBCLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_DBCLK_MASK (1 << 8) + +/* Used by CM_EMIF_EMIF_DLL_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_DLL_CLK_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_DLL_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_DLL_CLK_MASK (1 << 8) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_DSSCLK_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_DSSCLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_DSSCLK_MASK (1 << 8) + +/* Used by CM_ABE_SLIMBUS1_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_FCLK0_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_FCLK0_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_FCLK0_MASK (1 << 8) + +/* Used by CM_ABE_SLIMBUS1_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_FCLK1_SHIFT 9 +#define OMAP54XX_OPTFCLKEN_FCLK1_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_FCLK1_MASK (1 << 9) + +/* Used by CM_ABE_SLIMBUS1_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_FCLK2_SHIFT 10 +#define OMAP54XX_OPTFCLKEN_FCLK2_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_FCLK2_MASK (1 << 10) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_FUNC48M_CLK_SHIFT 15 +#define OMAP54XX_OPTFCLKEN_FUNC48M_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_FUNC48M_CLK_MASK (1 << 15) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT 13 +#define OMAP54XX_OPTFCLKEN_HSIC480M_P1_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_HSIC480M_P1_CLK_MASK (1 << 13) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT 14 +#define OMAP54XX_OPTFCLKEN_HSIC480M_P2_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_HSIC480M_P2_CLK_MASK (1 << 14) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_HSIC480M_P3_CLK_SHIFT 7 +#define OMAP54XX_OPTFCLKEN_HSIC480M_P3_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_HSIC480M_P3_CLK_MASK (1 << 7) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT 11 +#define OMAP54XX_OPTFCLKEN_HSIC60M_P1_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_HSIC60M_P1_CLK_MASK (1 << 11) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT 12 +#define OMAP54XX_OPTFCLKEN_HSIC60M_P2_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_HSIC60M_P2_CLK_MASK (1 << 12) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_HSIC60M_P3_CLK_SHIFT 6 +#define OMAP54XX_OPTFCLKEN_HSIC60M_P3_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_HSIC60M_P3_CLK_MASK (1 << 6) + +/* Used by CM_L3INIT_USB_OTG_SS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_REFCLK960M_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_REFCLK960M_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_REFCLK960M_MASK (1 << 8) + +/* Used by CM_L3INIT_SATA_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_REF_CLK_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_REF_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_REF_CLK_MASK (1 << 8) + +/* Used by CM_WKUPAON_SCRM_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_SCRM_CORE_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_SCRM_CORE_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_SCRM_CORE_MASK (1 << 8) + +/* Used by CM_WKUPAON_SCRM_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_SCRM_PER_SHIFT 9 +#define OMAP54XX_OPTFCLKEN_SCRM_PER_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_SCRM_PER_MASK (1 << 9) + +/* Used by CM_ABE_SLIMBUS1_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_SLIMBUS_CLK_SHIFT 11 +#define OMAP54XX_OPTFCLKEN_SLIMBUS_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_SLIMBUS_CLK_MASK (1 << 11) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_SYS_CLK_SHIFT 10 +#define OMAP54XX_OPTFCLKEN_SYS_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_SYS_CLK_MASK (1 << 10) + +/* Used by CM_MIPIEXT_LLI_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_TXPHY_CLK_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_TXPHY_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_TXPHY_CLK_MASK (1 << 8) + +/* Used by CM_MIPIEXT_LLI_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_TXPHY_LS_CLK_SHIFT 9 +#define OMAP54XX_OPTFCLKEN_TXPHY_LS_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_TXPHY_LS_CLK_MASK (1 << 9) + +/* Used by CM_L3INIT_USB_TLL_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_USB_CH0_CLK_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_USB_CH0_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_USB_CH0_CLK_MASK (1 << 8) + +/* Used by CM_L3INIT_USB_TLL_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_USB_CH1_CLK_SHIFT 9 +#define OMAP54XX_OPTFCLKEN_USB_CH1_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_USB_CH1_CLK_MASK (1 << 9) + +/* Used by CM_L3INIT_USB_TLL_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_USB_CH2_CLK_SHIFT 10 +#define OMAP54XX_OPTFCLKEN_USB_CH2_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_USB_CH2_CLK_MASK (1 << 10) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_UTMI_P1_CLK_SHIFT 8 +#define OMAP54XX_OPTFCLKEN_UTMI_P1_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_UTMI_P1_CLK_MASK (1 << 8) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_UTMI_P2_CLK_SHIFT 9 +#define OMAP54XX_OPTFCLKEN_UTMI_P2_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_UTMI_P2_CLK_MASK (1 << 9) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OMAP54XX_OPTFCLKEN_UTMI_P3_CLK_SHIFT 10 +#define OMAP54XX_OPTFCLKEN_UTMI_P3_CLK_WIDTH 0x1 +#define OMAP54XX_OPTFCLKEN_UTMI_P3_CLK_MASK (1 << 10) + +/* Used by CM_CORE_AON_DEBUG_OUT, CM_CORE_DEBUG_OUT */ +#define OMAP54XX_OUTPUT_SHIFT 0 +#define OMAP54XX_OUTPUT_WIDTH 0x20 +#define OMAP54XX_OUTPUT_MASK (0xffffffff << 0) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP54XX_PAD_CLKS_GATE_SHIFT 8 +#define OMAP54XX_PAD_CLKS_GATE_WIDTH 0x1 +#define OMAP54XX_PAD_CLKS_GATE_MASK (1 << 8) + +/* Used by CM_RESTORE_ST */ +#define OMAP54XX_PHASE1_COMPLETED_SHIFT 0 +#define OMAP54XX_PHASE1_COMPLETED_WIDTH 0x1 +#define OMAP54XX_PHASE1_COMPLETED_MASK (1 << 0) + +/* Used by CM_RESTORE_ST */ +#define OMAP54XX_PHASE2A_COMPLETED_SHIFT 1 +#define OMAP54XX_PHASE2A_COMPLETED_WIDTH 0x1 +#define OMAP54XX_PHASE2A_COMPLETED_MASK (1 << 1) + +/* Used by CM_RESTORE_ST */ +#define OMAP54XX_PHASE2B_COMPLETED_SHIFT 2 +#define OMAP54XX_PHASE2B_COMPLETED_WIDTH 0x1 +#define OMAP54XX_PHASE2B_COMPLETED_MASK (1 << 2) + +/* Used by CM_DYN_DEP_PRESCAL */ +#define OMAP54XX_PRESCAL_SHIFT 0 +#define OMAP54XX_PRESCAL_WIDTH 0x6 +#define OMAP54XX_PRESCAL_MASK (0x3f << 0) + +/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */ +#define OMAP54XX_R_RTL_SHIFT 11 +#define OMAP54XX_R_RTL_WIDTH 0x5 +#define OMAP54XX_R_RTL_MASK (0x1f << 11) + +/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL, CM_L3INIT_USB_TLL_HS_CLKCTRL */ +#define OMAP54XX_SAR_MODE_SHIFT 4 +#define OMAP54XX_SAR_MODE_WIDTH 0x1 +#define OMAP54XX_SAR_MODE_MASK (1 << 4) + +/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */ +#define OMAP54XX_SCHEME_SHIFT 30 +#define OMAP54XX_SCHEME_WIDTH 0x2 +#define OMAP54XX_SCHEME_MASK (0x3 << 30) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP54XX_SDMA_DYNDEP_SHIFT 11 +#define OMAP54XX_SDMA_DYNDEP_WIDTH 0x1 +#define OMAP54XX_SDMA_DYNDEP_MASK (1 << 11) + +/* Used by CM_IPU_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP54XX_SDMA_STATDEP_SHIFT 11 +#define OMAP54XX_SDMA_STATDEP_WIDTH 0x1 +#define OMAP54XX_SDMA_STATDEP_MASK (1 << 11) + +/* Used by CM_CORE_AON_DEBUG_CFG */ +#define OMAP54XX_SEL0_SHIFT 0 +#define OMAP54XX_SEL0_WIDTH 0x7 +#define OMAP54XX_SEL0_MASK (0x7f << 0) + +/* Renamed from SEL0 Used by CM_CORE_DEBUG_CFG */ +#define OMAP54XX_SEL0_0_7_SHIFT 0 +#define OMAP54XX_SEL0_0_7_WIDTH 0x8 +#define OMAP54XX_SEL0_0_7_MASK (0xff << 0) + +/* Used by CM_CORE_AON_DEBUG_CFG */ +#define OMAP54XX_SEL1_SHIFT 8 +#define OMAP54XX_SEL1_WIDTH 0x7 +#define OMAP54XX_SEL1_MASK (0x7f << 8) + +/* Renamed from SEL1 Used by CM_CORE_DEBUG_CFG */ +#define OMAP54XX_SEL1_CORE_DEBUG_CFG_SHIFT 8 +#define OMAP54XX_SEL1_CORE_DEBUG_CFG_WIDTH 0x8 +#define OMAP54XX_SEL1_CORE_DEBUG_CFG_MASK (0xff << 8) + +/* Used by CM_CORE_AON_DEBUG_CFG */ +#define OMAP54XX_SEL2_SHIFT 16 +#define OMAP54XX_SEL2_WIDTH 0x7 +#define OMAP54XX_SEL2_MASK (0x7f << 16) + +/* Renamed from SEL2 Used by CM_CORE_DEBUG_CFG */ +#define OMAP54XX_SEL2_CORE_DEBUG_CFG_SHIFT 16 +#define OMAP54XX_SEL2_CORE_DEBUG_CFG_WIDTH 0x8 +#define OMAP54XX_SEL2_CORE_DEBUG_CFG_MASK (0xff << 16) + +/* Used by CM_CORE_AON_DEBUG_CFG */ +#define OMAP54XX_SEL3_SHIFT 24 +#define OMAP54XX_SEL3_WIDTH 0x7 +#define OMAP54XX_SEL3_MASK (0x7f << 24) + +/* Renamed from SEL3 Used by CM_CORE_DEBUG_CFG */ +#define OMAP54XX_SEL3_CORE_DEBUG_CFG_SHIFT 24 +#define OMAP54XX_SEL3_CORE_DEBUG_CFG_WIDTH 0x8 +#define OMAP54XX_SEL3_CORE_DEBUG_CFG_MASK (0xff << 24) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP54XX_SLIMBUS1_CLK_GATE_SHIFT 10 +#define OMAP54XX_SLIMBUS1_CLK_GATE_WIDTH 0x1 +#define OMAP54XX_SLIMBUS1_CLK_GATE_MASK (1 << 10) + +/* + * Used by CM_ABE_AESS_CLKCTRL, CM_C2C_C2C_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_DMA_DMA_SYSTEM_CLKCTRL, CM_DSP_DSP_CLKCTRL, + * CM_DSS_BB2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, + * CM_GPU_GPU_CLKCTRL, CM_IPU_IPU_CLKCTRL, CM_IVA_IVA_CLKCTRL, + * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_IEEE1500_2_OCP_CLKCTRL, + * CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_SATA_CLKCTRL, + * CM_L3INIT_UNIPRO2_CLKCTRL, CM_L3INIT_USB_HOST_HS_CLKCTRL, + * CM_L3INIT_USB_OTG_SS_CLKCTRL, CM_L4SEC_DMA_CRYPTO_CLKCTRL, + * CM_MIPIEXT_LLI_CLKCTRL, CM_MPU_MPU_CLKCTRL + */ +#define OMAP54XX_STBYST_SHIFT 18 +#define OMAP54XX_STBYST_WIDTH 0x1 +#define OMAP54XX_STBYST_MASK (1 << 18) + +/* + * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_IVA, + * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO1, + * CM_IDLEST_DPLL_UNIPRO2, CM_IDLEST_DPLL_USB + */ +#define OMAP54XX_ST_DPLL_CLK_SHIFT 0 +#define OMAP54XX_ST_DPLL_CLK_WIDTH 0x1 +#define OMAP54XX_ST_DPLL_CLK_MASK (1 << 0) + +/* + * Used by CM_CLKDCOLDO_DPLL_UNIPRO1, CM_CLKDCOLDO_DPLL_UNIPRO2, + * CM_CLKDCOLDO_DPLL_USB + */ +#define OMAP54XX_ST_DPLL_CLKDCOLDO_SHIFT 9 +#define OMAP54XX_ST_DPLL_CLKDCOLDO_WIDTH 0x1 +#define OMAP54XX_ST_DPLL_CLKDCOLDO_MASK (1 << 9) + +/* + * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_IVA, + * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO1, + * CM_IDLEST_DPLL_UNIPRO2, CM_IDLEST_DPLL_USB + */ +#define OMAP54XX_ST_DPLL_INIT_SHIFT 4 +#define OMAP54XX_ST_DPLL_INIT_WIDTH 0x1 +#define OMAP54XX_ST_DPLL_INIT_MASK (1 << 4) + +/* + * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_IVA, + * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO1, + * CM_IDLEST_DPLL_UNIPRO2, CM_IDLEST_DPLL_USB + */ +#define OMAP54XX_ST_DPLL_MODE_SHIFT 1 +#define OMAP54XX_ST_DPLL_MODE_WIDTH 0x3 +#define OMAP54XX_ST_DPLL_MODE_MASK (0x7 << 1) + +/* Used by CM_CLKSEL_SYS */ +#define OMAP54XX_SYS_CLKSEL_SHIFT 0 +#define OMAP54XX_SYS_CLKSEL_WIDTH 0x3 +#define OMAP54XX_SYS_CLKSEL_MASK (0x7 << 0) + +/* + * Used by CM_C2C_DYNAMICDEP, CM_DSP_DYNAMICDEP, CM_EMU_DYNAMICDEP, + * CM_IPU_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP, CM_L3MAIN2_DYNAMICDEP, + * CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP, CM_MIPIEXT_DYNAMICDEP, + * CM_MPU_DYNAMICDEP + */ +#define OMAP54XX_WINDOWSIZE_SHIFT 24 +#define OMAP54XX_WINDOWSIZE_WIDTH 0x4 +#define OMAP54XX_WINDOWSIZE_MASK (0xf << 24) + +/* Used by CM_L3MAIN1_DYNAMICDEP */ +#define OMAP54XX_WKUPAON_DYNDEP_SHIFT 15 +#define OMAP54XX_WKUPAON_DYNDEP_WIDTH 0x1 +#define OMAP54XX_WKUPAON_DYNDEP_MASK (1 << 15) + +/* + * Used by CM_DMA_STATICDEP, CM_DSP_STATICDEP, CM_IPU_STATICDEP, + * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP + */ +#define OMAP54XX_WKUPAON_STATDEP_SHIFT 15 +#define OMAP54XX_WKUPAON_STATDEP_WIDTH 0x1 +#define OMAP54XX_WKUPAON_STATDEP_MASK (1 << 15) + +/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */ +#define OMAP54XX_X_MAJOR_SHIFT 8 +#define OMAP54XX_X_MAJOR_WIDTH 0x3 +#define OMAP54XX_X_MAJOR_MASK (0x7 << 8) + +/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */ +#define OMAP54XX_Y_MINOR_SHIFT 0 +#define OMAP54XX_Y_MINOR_WIDTH 0x6 +#define OMAP54XX_Y_MINOR_MASK (0x3f << 0) +#endif diff --git a/arch/arm/mach-omap2/cm1_44xx.h b/arch/arm/mach-omap2/cm1_44xx.h index 1bc00dc4876..5ae8fe39d6e 100644 --- a/arch/arm/mach-omap2/cm1_44xx.h +++ b/arch/arm/mach-omap2/cm1_44xx.h @@ -25,6 +25,8 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM1_44XX_H #define __ARCH_ARM_MACH_OMAP2_CM1_44XX_H +#include "cm_44xx_54xx.h" + /* CM1 base address */ #define OMAP4430_CM1_BASE 0x4a004000 @@ -217,9 +219,4 @@ #define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET 0x0088 #define OMAP4430_CM1_ABE_WDT3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0088) -/* Function prototypes */ -extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx); -extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx); -extern u32 omap4_cm1_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); - #endif diff --git a/arch/arm/mach-omap2/cm1_54xx.h b/arch/arm/mach-omap2/cm1_54xx.h new file mode 100644 index 00000000000..90b3348e667 --- /dev/null +++ b/arch/arm/mach-omap2/cm1_54xx.h @@ -0,0 +1,213 @@ +/* + * OMAP54xx CM1 instance offset macros + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM1_54XX_H +#define __ARCH_ARM_MACH_OMAP2_CM1_54XX_H + +#include "cm_44xx_54xx.h" + +/* CM1 base address */ +#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000 + +#define OMAP54XX_CM_CORE_AON_REGADDR(inst, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE + (inst) + (reg)) + +/* CM_CORE_AON instances */ +#define OMAP54XX_CM_CORE_AON_OCP_SOCKET_INST 0x0000 +#define OMAP54XX_CM_CORE_AON_CKGEN_INST 0x0100 +#define OMAP54XX_CM_CORE_AON_MPU_INST 0x0300 +#define OMAP54XX_CM_CORE_AON_DSP_INST 0x0400 +#define OMAP54XX_CM_CORE_AON_ABE_INST 0x0500 +#define OMAP54XX_CM_CORE_AON_RESTORE_INST 0x0e00 +#define OMAP54XX_CM_CORE_AON_INSTR_INST 0x0f00 + +/* CM_CORE_AON clockdomain register offsets (from instance start) */ +#define OMAP54XX_CM_CORE_AON_MPU_MPU_CDOFFS 0x0000 +#define OMAP54XX_CM_CORE_AON_DSP_DSP_CDOFFS 0x0000 +#define OMAP54XX_CM_CORE_AON_ABE_ABE_CDOFFS 0x0000 + +/* CM_CORE_AON */ + +/* CM_CORE_AON.OCP_SOCKET_CM_CORE_AON register offsets */ +#define OMAP54XX_REVISION_CM_CORE_AON_OFFSET 0x0000 +#define OMAP54XX_CM_CM_CORE_AON_PROFILING_CLKCTRL_OFFSET 0x0040 +#define OMAP54XX_CM_CM_CORE_AON_PROFILING_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_OCP_SOCKET_INST, 0x0040) +#define OMAP54XX_CM_CORE_AON_DEBUG_CFG_OFFSET 0x0080 +#define OMAP54XX_CM_CORE_AON_DEBUG_OUT_OFFSET 0x0084 +#define OMAP54XX_CM_CORE_AON_DEBUG_MPU_FD_TRANS_OFFSET 0x0090 +#define OMAP54XX_CM_CORE_AON_DEBUG_DSP_FD_TRANS_OFFSET 0x0094 +#define OMAP54XX_CM_CORE_AON_DEBUG_ABE_FD_TRANS_OFFSET 0x0098 +#define OMAP54XX_CM_CORE_AON_DEBUG_ABE_FD_TRANS2_OFFSET 0x009c +#define OMAP54XX_CM_CORE_AON_DEBUG_CM_CORE_AON_FD_TRANS_OFFSET 0x00a0 +#define OMAP54XX_CM_CORE_AON_DEBUG_C2C_FD_TRANS_OFFSET 0x00a4 +#define OMAP54XX_CM_CORE_AON_DEBUG_CAM_FD_TRANS_OFFSET 0x00a8 +#define OMAP54XX_CM_CORE_AON_DEBUG_COREAON_FD_TRANS_OFFSET 0x00ac +#define OMAP54XX_CM_CORE_AON_DEBUG_CUSTEFUSE_FD_TRANS_OFFSET 0x00b0 +#define OMAP54XX_CM_CORE_AON_DEBUG_DMA_FD_TRANS_OFFSET 0x00b4 +#define OMAP54XX_CM_CORE_AON_DEBUG_DSS_FD_TRANS_OFFSET 0x00b8 +#define OMAP54XX_CM_CORE_AON_DEBUG_EMIF_FD_TRANS_OFFSET 0x00bc +#define OMAP54XX_CM_CORE_AON_DEBUG_GPU_FD_TRANS_OFFSET 0x00c0 +#define OMAP54XX_CM_CORE_AON_DEBUG_IPU_FD_TRANS_OFFSET 0x00c4 +#define OMAP54XX_CM_CORE_AON_DEBUG_IVA_FD_TRANS_OFFSET 0x00c8 +#define OMAP54XX_CM_CORE_AON_DEBUG_L3INIT_FD_TRANS_OFFSET 0x00cc +#define OMAP54XX_CM_CORE_AON_DEBUG_L3INIT_FD_TRANS2_OFFSET 0x00d0 +#define OMAP54XX_CM_CORE_AON_DEBUG_L3INSTR_FD_TRANS_OFFSET 0x00d4 +#define OMAP54XX_CM_CORE_AON_DEBUG_L3MAIN1_FD_TRANS_OFFSET 0x00d8 +#define OMAP54XX_CM_CORE_AON_DEBUG_L3MAIN2_FD_TRANS_OFFSET 0x00dc +#define OMAP54XX_CM_CORE_AON_DEBUG_L4CFG_FD_TRANS_OFFSET 0x00e0 +#define OMAP54XX_CM_CORE_AON_DEBUG_L4PER_FD_TRANS_OFFSET 0x00e4 +#define OMAP54XX_CM_CORE_AON_DEBUG_L4PER_FD_TRANS2_OFFSET 0x00e8 +#define OMAP54XX_CM_CORE_AON_DEBUG_L4SEC_FD_TRANS_OFFSET 0x00ec +#define OMAP54XX_CM_CORE_AON_DEBUG_MIPIEXT_FD_TRANS_OFFSET 0x00f0 + +/* CM_CORE_AON.CKGEN_CM_CORE_AON register offsets */ +#define OMAP54XX_CM_CLKSEL_CORE_OFFSET 0x0000 +#define OMAP54XX_CM_CLKSEL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0000) +#define OMAP54XX_CM_CLKSEL_ABE_OFFSET 0x0008 +#define OMAP54XX_CM_CLKSEL_ABE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0008) +#define OMAP54XX_CM_DLL_CTRL_OFFSET 0x0010 +#define OMAP54XX_CM_CLKMODE_DPLL_CORE_OFFSET 0x0020 +#define OMAP54XX_CM_CLKMODE_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0020) +#define OMAP54XX_CM_IDLEST_DPLL_CORE_OFFSET 0x0024 +#define OMAP54XX_CM_IDLEST_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0024) +#define OMAP54XX_CM_AUTOIDLE_DPLL_CORE_OFFSET 0x0028 +#define OMAP54XX_CM_AUTOIDLE_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0028) +#define OMAP54XX_CM_CLKSEL_DPLL_CORE_OFFSET 0x002c +#define OMAP54XX_CM_CLKSEL_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x002c) +#define OMAP54XX_CM_DIV_M2_DPLL_CORE_OFFSET 0x0030 +#define OMAP54XX_CM_DIV_M2_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0030) +#define OMAP54XX_CM_DIV_M3_DPLL_CORE_OFFSET 0x0034 +#define OMAP54XX_CM_DIV_M3_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0034) +#define OMAP54XX_CM_DIV_H11_DPLL_CORE_OFFSET 0x0038 +#define OMAP54XX_CM_DIV_H11_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0038) +#define OMAP54XX_CM_DIV_H12_DPLL_CORE_OFFSET 0x003c +#define OMAP54XX_CM_DIV_H12_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x003c) +#define OMAP54XX_CM_DIV_H13_DPLL_CORE_OFFSET 0x0040 +#define OMAP54XX_CM_DIV_H13_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0040) +#define OMAP54XX_CM_DIV_H14_DPLL_CORE_OFFSET 0x0044 +#define OMAP54XX_CM_DIV_H14_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0044) +#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0048 +#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x004c +#define OMAP54XX_CM_DIV_H21_DPLL_CORE_OFFSET 0x0050 +#define OMAP54XX_CM_DIV_H21_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0050) +#define OMAP54XX_CM_DIV_H22_DPLL_CORE_OFFSET 0x0054 +#define OMAP54XX_CM_DIV_H22_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0054) +#define OMAP54XX_CM_DIV_H23_DPLL_CORE_OFFSET 0x0058 +#define OMAP54XX_CM_DIV_H23_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0058) +#define OMAP54XX_CM_DIV_H24_DPLL_CORE_OFFSET 0x005c +#define OMAP54XX_CM_DIV_H24_DPLL_CORE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x005c) +#define OMAP54XX_CM_CLKMODE_DPLL_MPU_OFFSET 0x0060 +#define OMAP54XX_CM_CLKMODE_DPLL_MPU OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0060) +#define OMAP54XX_CM_IDLEST_DPLL_MPU_OFFSET 0x0064 +#define OMAP54XX_CM_IDLEST_DPLL_MPU OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0064) +#define OMAP54XX_CM_AUTOIDLE_DPLL_MPU_OFFSET 0x0068 +#define OMAP54XX_CM_AUTOIDLE_DPLL_MPU OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0068) +#define OMAP54XX_CM_CLKSEL_DPLL_MPU_OFFSET 0x006c +#define OMAP54XX_CM_CLKSEL_DPLL_MPU OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x006c) +#define OMAP54XX_CM_DIV_M2_DPLL_MPU_OFFSET 0x0070 +#define OMAP54XX_CM_DIV_M2_DPLL_MPU OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0070) +#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0088 +#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x008c +#define OMAP54XX_CM_BYPCLK_DPLL_MPU_OFFSET 0x009c +#define OMAP54XX_CM_BYPCLK_DPLL_MPU OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x009c) +#define OMAP54XX_CM_CLKMODE_DPLL_IVA_OFFSET 0x00a0 +#define OMAP54XX_CM_CLKMODE_DPLL_IVA OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00a0) +#define OMAP54XX_CM_IDLEST_DPLL_IVA_OFFSET 0x00a4 +#define OMAP54XX_CM_IDLEST_DPLL_IVA OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00a4) +#define OMAP54XX_CM_AUTOIDLE_DPLL_IVA_OFFSET 0x00a8 +#define OMAP54XX_CM_AUTOIDLE_DPLL_IVA OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00a8) +#define OMAP54XX_CM_CLKSEL_DPLL_IVA_OFFSET 0x00ac +#define OMAP54XX_CM_CLKSEL_DPLL_IVA OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00ac) +#define OMAP54XX_CM_DIV_H11_DPLL_IVA_OFFSET 0x00b8 +#define OMAP54XX_CM_DIV_H11_DPLL_IVA OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00b8) +#define OMAP54XX_CM_DIV_H12_DPLL_IVA_OFFSET 0x00bc +#define OMAP54XX_CM_DIV_H12_DPLL_IVA OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00bc) +#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET 0x00c8 +#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET 0x00cc +#define OMAP54XX_CM_BYPCLK_DPLL_IVA_OFFSET 0x00dc +#define OMAP54XX_CM_BYPCLK_DPLL_IVA OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00dc) +#define OMAP54XX_CM_CLKMODE_DPLL_ABE_OFFSET 0x00e0 +#define OMAP54XX_CM_CLKMODE_DPLL_ABE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00e0) +#define OMAP54XX_CM_IDLEST_DPLL_ABE_OFFSET 0x00e4 +#define OMAP54XX_CM_IDLEST_DPLL_ABE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00e4) +#define OMAP54XX_CM_AUTOIDLE_DPLL_ABE_OFFSET 0x00e8 +#define OMAP54XX_CM_AUTOIDLE_DPLL_ABE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00e8) +#define OMAP54XX_CM_CLKSEL_DPLL_ABE_OFFSET 0x00ec +#define OMAP54XX_CM_CLKSEL_DPLL_ABE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00ec) +#define OMAP54XX_CM_DIV_M2_DPLL_ABE_OFFSET 0x00f0 +#define OMAP54XX_CM_DIV_M2_DPLL_ABE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00f0) +#define OMAP54XX_CM_DIV_M3_DPLL_ABE_OFFSET 0x00f4 +#define OMAP54XX_CM_DIV_M3_DPLL_ABE OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00f4) +#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET 0x0108 +#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET 0x010c +#define OMAP54XX_CM_SHADOW_FREQ_CONFIG1_OFFSET 0x0160 +#define OMAP54XX_CM_SHADOW_FREQ_CONFIG2_OFFSET 0x0164 +#define OMAP54XX_CM_DYN_DEP_PRESCAL_OFFSET 0x0170 +#define OMAP54XX_CM_RESTORE_ST_OFFSET 0x0180 + +/* CM_CORE_AON.MPU_CM_CORE_AON register offsets */ +#define OMAP54XX_CM_MPU_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_MPU_STATICDEP_OFFSET 0x0004 +#define OMAP54XX_CM_MPU_DYNAMICDEP_OFFSET 0x0008 +#define OMAP54XX_CM_MPU_MPU_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_MPU_MPU_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_MPU_INST, 0x0020) +#define OMAP54XX_CM_MPU_MPU_MPU_DBG_CLKCTRL_OFFSET 0x0028 +#define OMAP54XX_CM_MPU_MPU_MPU_DBG_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_MPU_INST, 0x0028) + +/* CM_CORE_AON.DSP_CM_CORE_AON register offsets */ +#define OMAP54XX_CM_DSP_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_DSP_STATICDEP_OFFSET 0x0004 +#define OMAP54XX_CM_DSP_DYNAMICDEP_OFFSET 0x0008 +#define OMAP54XX_CM_DSP_DSP_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_DSP_DSP_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_DSP_INST, 0x0020) + +/* CM_CORE_AON.ABE_CM_CORE_AON register offsets */ +#define OMAP54XX_CM_ABE_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_ABE_L4_ABE_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_ABE_L4_ABE_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0020) +#define OMAP54XX_CM_ABE_AESS_CLKCTRL_OFFSET 0x0028 +#define OMAP54XX_CM_ABE_AESS_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0028) +#define OMAP54XX_CM_ABE_MCPDM_CLKCTRL_OFFSET 0x0030 +#define OMAP54XX_CM_ABE_MCPDM_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0030) +#define OMAP54XX_CM_ABE_DMIC_CLKCTRL_OFFSET 0x0038 +#define OMAP54XX_CM_ABE_DMIC_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0038) +#define OMAP54XX_CM_ABE_MCASP_CLKCTRL_OFFSET 0x0040 +#define OMAP54XX_CM_ABE_MCASP_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0040) +#define OMAP54XX_CM_ABE_MCBSP1_CLKCTRL_OFFSET 0x0048 +#define OMAP54XX_CM_ABE_MCBSP1_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0048) +#define OMAP54XX_CM_ABE_MCBSP2_CLKCTRL_OFFSET 0x0050 +#define OMAP54XX_CM_ABE_MCBSP2_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0050) +#define OMAP54XX_CM_ABE_MCBSP3_CLKCTRL_OFFSET 0x0058 +#define OMAP54XX_CM_ABE_MCBSP3_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0058) +#define OMAP54XX_CM_ABE_SLIMBUS1_CLKCTRL_OFFSET 0x0060 +#define OMAP54XX_CM_ABE_SLIMBUS1_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0060) +#define OMAP54XX_CM_ABE_TIMER5_CLKCTRL_OFFSET 0x0068 +#define OMAP54XX_CM_ABE_TIMER5_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0068) +#define OMAP54XX_CM_ABE_TIMER6_CLKCTRL_OFFSET 0x0070 +#define OMAP54XX_CM_ABE_TIMER6_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0070) +#define OMAP54XX_CM_ABE_TIMER7_CLKCTRL_OFFSET 0x0078 +#define OMAP54XX_CM_ABE_TIMER7_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0078) +#define OMAP54XX_CM_ABE_TIMER8_CLKCTRL_OFFSET 0x0080 +#define OMAP54XX_CM_ABE_TIMER8_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0080) +#define OMAP54XX_CM_ABE_WD_TIMER3_CLKCTRL_OFFSET 0x0088 +#define OMAP54XX_CM_ABE_WD_TIMER3_CLKCTRL OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0088) + +#endif diff --git a/arch/arm/mach-omap2/cm2_44xx.h b/arch/arm/mach-omap2/cm2_44xx.h index b9de72da1a8..ee5136d7cdd 100644 --- a/arch/arm/mach-omap2/cm2_44xx.h +++ b/arch/arm/mach-omap2/cm2_44xx.h @@ -25,6 +25,8 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM2_44XX_H #define __ARCH_ARM_MACH_OMAP2_CM2_44XX_H +#include "cm_44xx_54xx.h" + /* CM2 base address */ #define OMAP4430_CM2_BASE 0x4a008000 @@ -449,9 +451,4 @@ #define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0020) -/* Function prototypes */ -extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx); -extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx); -extern u32 omap4_cm2_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); - #endif diff --git a/arch/arm/mach-omap2/cm2_54xx.h b/arch/arm/mach-omap2/cm2_54xx.h new file mode 100644 index 00000000000..2683231b299 --- /dev/null +++ b/arch/arm/mach-omap2/cm2_54xx.h @@ -0,0 +1,389 @@ +/* + * OMAP54xx CM2 instance offset macros + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM2_54XX_H +#define __ARCH_ARM_MACH_OMAP2_CM2_54XX_H + +#include "cm_44xx_54xx.h" + +/* CM2 base address */ +#define OMAP54XX_CM_CORE_BASE 0x4a008000 + +#define OMAP54XX_CM_CORE_REGADDR(inst, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE + (inst) + (reg)) + +/* CM_CORE instances */ +#define OMAP54XX_CM_CORE_OCP_SOCKET_INST 0x0000 +#define OMAP54XX_CM_CORE_CKGEN_INST 0x0100 +#define OMAP54XX_CM_CORE_COREAON_INST 0x0600 +#define OMAP54XX_CM_CORE_CORE_INST 0x0700 +#define OMAP54XX_CM_CORE_IVA_INST 0x1200 +#define OMAP54XX_CM_CORE_CAM_INST 0x1300 +#define OMAP54XX_CM_CORE_DSS_INST 0x1400 +#define OMAP54XX_CM_CORE_GPU_INST 0x1500 +#define OMAP54XX_CM_CORE_L3INIT_INST 0x1600 +#define OMAP54XX_CM_CORE_CUSTEFUSE_INST 0x1700 +#define OMAP54XX_CM_CORE_RESTORE_INST 0x1e00 +#define OMAP54XX_CM_CORE_INSTR_INST 0x1f00 + +/* CM_CORE clockdomain register offsets (from instance start) */ +#define OMAP54XX_CM_CORE_COREAON_COREAON_CDOFFS 0x0000 +#define OMAP54XX_CM_CORE_CORE_L3MAIN1_CDOFFS 0x0000 +#define OMAP54XX_CM_CORE_CORE_L3MAIN2_CDOFFS 0x0100 +#define OMAP54XX_CM_CORE_CORE_IPU_CDOFFS 0x0200 +#define OMAP54XX_CM_CORE_CORE_DMA_CDOFFS 0x0300 +#define OMAP54XX_CM_CORE_CORE_EMIF_CDOFFS 0x0400 +#define OMAP54XX_CM_CORE_CORE_C2C_CDOFFS 0x0500 +#define OMAP54XX_CM_CORE_CORE_L4CFG_CDOFFS 0x0600 +#define OMAP54XX_CM_CORE_CORE_L3INSTR_CDOFFS 0x0700 +#define OMAP54XX_CM_CORE_CORE_MIPIEXT_CDOFFS 0x0800 +#define OMAP54XX_CM_CORE_CORE_L4PER_CDOFFS 0x0900 +#define OMAP54XX_CM_CORE_CORE_L4SEC_CDOFFS 0x0a80 +#define OMAP54XX_CM_CORE_IVA_IVA_CDOFFS 0x0000 +#define OMAP54XX_CM_CORE_CAM_CAM_CDOFFS 0x0000 +#define OMAP54XX_CM_CORE_DSS_DSS_CDOFFS 0x0000 +#define OMAP54XX_CM_CORE_GPU_GPU_CDOFFS 0x0000 +#define OMAP54XX_CM_CORE_L3INIT_L3INIT_CDOFFS 0x0000 +#define OMAP54XX_CM_CORE_CUSTEFUSE_CUSTEFUSE_CDOFFS 0x0000 + +/* CM_CORE */ + +/* CM_CORE.OCP_SOCKET_CM_CORE register offsets */ +#define OMAP54XX_REVISION_CM_CORE_OFFSET 0x0000 +#define OMAP54XX_CM_CM_CORE_PROFILING_CLKCTRL_OFFSET 0x0040 +#define OMAP54XX_CM_CM_CORE_PROFILING_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_OCP_SOCKET_INST, 0x0040) +#define OMAP54XX_CM_CORE_DEBUG_CFG_OFFSET 0x0080 +#define OMAP54XX_CM_CORE_DEBUG_OUT_OFFSET 0x0084 + +/* CM_CORE.CKGEN_CM_CORE register offsets */ +#define OMAP54XX_CM_CLKSEL_USB_60MHZ_OFFSET 0x0004 +#define OMAP54XX_CM_CLKSEL_USB_60MHZ OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0004) +#define OMAP54XX_CM_CLKMODE_DPLL_PER_OFFSET 0x0040 +#define OMAP54XX_CM_CLKMODE_DPLL_PER OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0040) +#define OMAP54XX_CM_IDLEST_DPLL_PER_OFFSET 0x0044 +#define OMAP54XX_CM_IDLEST_DPLL_PER OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0044) +#define OMAP54XX_CM_AUTOIDLE_DPLL_PER_OFFSET 0x0048 +#define OMAP54XX_CM_AUTOIDLE_DPLL_PER OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0048) +#define OMAP54XX_CM_CLKSEL_DPLL_PER_OFFSET 0x004c +#define OMAP54XX_CM_CLKSEL_DPLL_PER OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x004c) +#define OMAP54XX_CM_DIV_M2_DPLL_PER_OFFSET 0x0050 +#define OMAP54XX_CM_DIV_M2_DPLL_PER OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0050) +#define OMAP54XX_CM_DIV_M3_DPLL_PER_OFFSET 0x0054 +#define OMAP54XX_CM_DIV_M3_DPLL_PER OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0054) +#define OMAP54XX_CM_DIV_H11_DPLL_PER_OFFSET 0x0058 +#define OMAP54XX_CM_DIV_H11_DPLL_PER OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0058) +#define OMAP54XX_CM_DIV_H12_DPLL_PER_OFFSET 0x005c +#define OMAP54XX_CM_DIV_H12_DPLL_PER OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x005c) +#define OMAP54XX_CM_DIV_H13_DPLL_PER_OFFSET 0x0060 +#define OMAP54XX_CM_DIV_H13_DPLL_PER OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0060) +#define OMAP54XX_CM_DIV_H14_DPLL_PER_OFFSET 0x0064 +#define OMAP54XX_CM_DIV_H14_DPLL_PER OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0064) +#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0068 +#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x006c +#define OMAP54XX_CM_CLKMODE_DPLL_USB_OFFSET 0x0080 +#define OMAP54XX_CM_CLKMODE_DPLL_USB OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0080) +#define OMAP54XX_CM_IDLEST_DPLL_USB_OFFSET 0x0084 +#define OMAP54XX_CM_IDLEST_DPLL_USB OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0084) +#define OMAP54XX_CM_AUTOIDLE_DPLL_USB_OFFSET 0x0088 +#define OMAP54XX_CM_AUTOIDLE_DPLL_USB OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0088) +#define OMAP54XX_CM_CLKSEL_DPLL_USB_OFFSET 0x008c +#define OMAP54XX_CM_CLKSEL_DPLL_USB OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x008c) +#define OMAP54XX_CM_DIV_M2_DPLL_USB_OFFSET 0x0090 +#define OMAP54XX_CM_DIV_M2_DPLL_USB OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0090) +#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET 0x00a8 +#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET 0x00ac +#define OMAP54XX_CM_CLKDCOLDO_DPLL_USB_OFFSET 0x00b4 +#define OMAP54XX_CM_CLKDCOLDO_DPLL_USB OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00b4) +#define OMAP54XX_CM_CLKMODE_DPLL_UNIPRO2_OFFSET 0x00c0 +#define OMAP54XX_CM_CLKMODE_DPLL_UNIPRO2 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00c0) +#define OMAP54XX_CM_IDLEST_DPLL_UNIPRO2_OFFSET 0x00c4 +#define OMAP54XX_CM_IDLEST_DPLL_UNIPRO2 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00c4) +#define OMAP54XX_CM_AUTOIDLE_DPLL_UNIPRO2_OFFSET 0x00c8 +#define OMAP54XX_CM_AUTOIDLE_DPLL_UNIPRO2 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00c8) +#define OMAP54XX_CM_CLKSEL_DPLL_UNIPRO2_OFFSET 0x00cc +#define OMAP54XX_CM_CLKSEL_DPLL_UNIPRO2 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00cc) +#define OMAP54XX_CM_DIV_M2_DPLL_UNIPRO2_OFFSET 0x00d0 +#define OMAP54XX_CM_DIV_M2_DPLL_UNIPRO2 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00d0) +#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_UNIPRO2_OFFSET 0x00e8 +#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_UNIPRO2_OFFSET 0x00ec +#define OMAP54XX_CM_CLKDCOLDO_DPLL_UNIPRO2_OFFSET 0x00f4 +#define OMAP54XX_CM_CLKDCOLDO_DPLL_UNIPRO2 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00f4) +#define OMAP54XX_CM_CLKMODE_DPLL_UNIPRO1_OFFSET 0x0100 +#define OMAP54XX_CM_CLKMODE_DPLL_UNIPRO1 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0100) +#define OMAP54XX_CM_IDLEST_DPLL_UNIPRO1_OFFSET 0x0104 +#define OMAP54XX_CM_IDLEST_DPLL_UNIPRO1 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0104) +#define OMAP54XX_CM_AUTOIDLE_DPLL_UNIPRO1_OFFSET 0x0108 +#define OMAP54XX_CM_AUTOIDLE_DPLL_UNIPRO1 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0108) +#define OMAP54XX_CM_CLKSEL_DPLL_UNIPRO1_OFFSET 0x010c +#define OMAP54XX_CM_CLKSEL_DPLL_UNIPRO1 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x010c) +#define OMAP54XX_CM_DIV_M2_DPLL_UNIPRO1_OFFSET 0x0110 +#define OMAP54XX_CM_DIV_M2_DPLL_UNIPRO1 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0110) +#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_UNIPRO1_OFFSET 0x0128 +#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_UNIPRO1_OFFSET 0x012c +#define OMAP54XX_CM_CLKDCOLDO_DPLL_UNIPRO1_OFFSET 0x0134 +#define OMAP54XX_CM_CLKDCOLDO_DPLL_UNIPRO1 OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0134) + +/* CM_CORE.COREAON_CM_CORE register offsets */ +#define OMAP54XX_CM_COREAON_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL_OFFSET 0x0028 +#define OMAP54XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_COREAON_INST, 0x0028) +#define OMAP54XX_CM_COREAON_SMARTREFLEX_MM_CLKCTRL_OFFSET 0x0030 +#define OMAP54XX_CM_COREAON_SMARTREFLEX_MM_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_COREAON_INST, 0x0030) +#define OMAP54XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL_OFFSET 0x0038 +#define OMAP54XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_COREAON_INST, 0x0038) +#define OMAP54XX_CM_COREAON_USB_PHY_CORE_CLKCTRL_OFFSET 0x0040 +#define OMAP54XX_CM_COREAON_USB_PHY_CORE_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_COREAON_INST, 0x0040) +#define OMAP54XX_CM_COREAON_IO_SRCOMP_CLKCTRL_OFFSET 0x0050 +#define OMAP54XX_CM_COREAON_IO_SRCOMP_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_COREAON_INST, 0x0050) + +/* CM_CORE.CORE_CM_CORE register offsets */ +#define OMAP54XX_CM_L3MAIN1_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_L3MAIN1_DYNAMICDEP_OFFSET 0x0008 +#define OMAP54XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0020) +#define OMAP54XX_CM_L3MAIN2_CLKSTCTRL_OFFSET 0x0100 +#define OMAP54XX_CM_L3MAIN2_DYNAMICDEP_OFFSET 0x0108 +#define OMAP54XX_CM_L3MAIN2_L3_MAIN_2_CLKCTRL_OFFSET 0x0120 +#define OMAP54XX_CM_L3MAIN2_L3_MAIN_2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0120) +#define OMAP54XX_CM_L3MAIN2_GPMC_CLKCTRL_OFFSET 0x0128 +#define OMAP54XX_CM_L3MAIN2_GPMC_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0128) +#define OMAP54XX_CM_L3MAIN2_OCMC_RAM_CLKCTRL_OFFSET 0x0130 +#define OMAP54XX_CM_L3MAIN2_OCMC_RAM_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0130) +#define OMAP54XX_CM_IPU_CLKSTCTRL_OFFSET 0x0200 +#define OMAP54XX_CM_IPU_STATICDEP_OFFSET 0x0204 +#define OMAP54XX_CM_IPU_DYNAMICDEP_OFFSET 0x0208 +#define OMAP54XX_CM_IPU_IPU_CLKCTRL_OFFSET 0x0220 +#define OMAP54XX_CM_IPU_IPU_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0220) +#define OMAP54XX_CM_DMA_CLKSTCTRL_OFFSET 0x0300 +#define OMAP54XX_CM_DMA_STATICDEP_OFFSET 0x0304 +#define OMAP54XX_CM_DMA_DYNAMICDEP_OFFSET 0x0308 +#define OMAP54XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET 0x0320 +#define OMAP54XX_CM_DMA_DMA_SYSTEM_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0320) +#define OMAP54XX_CM_EMIF_CLKSTCTRL_OFFSET 0x0400 +#define OMAP54XX_CM_EMIF_DMM_CLKCTRL_OFFSET 0x0420 +#define OMAP54XX_CM_EMIF_DMM_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0420) +#define OMAP54XX_CM_EMIF_EMIF_OCP_FW_CLKCTRL_OFFSET 0x0428 +#define OMAP54XX_CM_EMIF_EMIF_OCP_FW_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0428) +#define OMAP54XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET 0x0430 +#define OMAP54XX_CM_EMIF_EMIF1_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0430) +#define OMAP54XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET 0x0438 +#define OMAP54XX_CM_EMIF_EMIF2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0438) +#define OMAP54XX_CM_EMIF_EMIF_DLL_CLKCTRL_OFFSET 0x0440 +#define OMAP54XX_CM_EMIF_EMIF_DLL_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0440) +#define OMAP54XX_CM_C2C_CLKSTCTRL_OFFSET 0x0500 +#define OMAP54XX_CM_C2C_STATICDEP_OFFSET 0x0504 +#define OMAP54XX_CM_C2C_DYNAMICDEP_OFFSET 0x0508 +#define OMAP54XX_CM_C2C_C2C_CLKCTRL_OFFSET 0x0520 +#define OMAP54XX_CM_C2C_C2C_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0520) +#define OMAP54XX_CM_C2C_MODEM_ICR_CLKCTRL_OFFSET 0x0528 +#define OMAP54XX_CM_C2C_MODEM_ICR_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0528) +#define OMAP54XX_CM_C2C_C2C_OCP_FW_CLKCTRL_OFFSET 0x0530 +#define OMAP54XX_CM_C2C_C2C_OCP_FW_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0530) +#define OMAP54XX_CM_L4CFG_CLKSTCTRL_OFFSET 0x0600 +#define OMAP54XX_CM_L4CFG_DYNAMICDEP_OFFSET 0x0608 +#define OMAP54XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET 0x0620 +#define OMAP54XX_CM_L4CFG_L4_CFG_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0620) +#define OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET 0x0628 +#define OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0628) +#define OMAP54XX_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET 0x0630 +#define OMAP54XX_CM_L4CFG_MAILBOX_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0630) +#define OMAP54XX_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET 0x0638 +#define OMAP54XX_CM_L4CFG_SAR_ROM_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0638) +#define OMAP54XX_CM_L4CFG_OCP2SCP2_CLKCTRL_OFFSET 0x0640 +#define OMAP54XX_CM_L4CFG_OCP2SCP2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0640) +#define OMAP54XX_CM_L3INSTR_CLKSTCTRL_OFFSET 0x0700 +#define OMAP54XX_CM_L3INSTR_L3_MAIN_3_CLKCTRL_OFFSET 0x0720 +#define OMAP54XX_CM_L3INSTR_L3_MAIN_3_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0720) +#define OMAP54XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET 0x0728 +#define OMAP54XX_CM_L3INSTR_L3_INSTR_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0728) +#define OMAP54XX_CM_L3INSTR_OCP_WP_NOC_CLKCTRL_OFFSET 0x0740 +#define OMAP54XX_CM_L3INSTR_OCP_WP_NOC_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0740) +#define OMAP54XX_CM_L3INSTR_DLL_AGING_CLKCTRL_OFFSET 0x0748 +#define OMAP54XX_CM_L3INSTR_DLL_AGING_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0748) +#define OMAP54XX_CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL_OFFSET 0x0750 +#define OMAP54XX_CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0750) +#define OMAP54XX_CM_MIPIEXT_CLKSTCTRL_OFFSET 0x0800 +#define OMAP54XX_CM_MIPIEXT_STATICDEP_OFFSET 0x0804 +#define OMAP54XX_CM_MIPIEXT_DYNAMICDEP_OFFSET 0x0808 +#define OMAP54XX_CM_MIPIEXT_LLI_CLKCTRL_OFFSET 0x0820 +#define OMAP54XX_CM_MIPIEXT_LLI_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0820) +#define OMAP54XX_CM_MIPIEXT_LLI_OCP_FW_CLKCTRL_OFFSET 0x0828 +#define OMAP54XX_CM_MIPIEXT_LLI_OCP_FW_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0828) +#define OMAP54XX_CM_MIPIEXT_MPHY_CLKCTRL_OFFSET 0x0830 +#define OMAP54XX_CM_MIPIEXT_MPHY_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0830) +#define OMAP54XX_CM_L4PER_CLKSTCTRL_OFFSET 0x0900 +#define OMAP54XX_CM_L4PER_DYNAMICDEP_OFFSET 0x0908 +#define OMAP54XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET 0x0928 +#define OMAP54XX_CM_L4PER_TIMER10_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0928) +#define OMAP54XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET 0x0930 +#define OMAP54XX_CM_L4PER_TIMER11_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0930) +#define OMAP54XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET 0x0938 +#define OMAP54XX_CM_L4PER_TIMER2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0938) +#define OMAP54XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET 0x0940 +#define OMAP54XX_CM_L4PER_TIMER3_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0940) +#define OMAP54XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET 0x0948 +#define OMAP54XX_CM_L4PER_TIMER4_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0948) +#define OMAP54XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET 0x0950 +#define OMAP54XX_CM_L4PER_TIMER9_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0950) +#define OMAP54XX_CM_L4PER_ELM_CLKCTRL_OFFSET 0x0958 +#define OMAP54XX_CM_L4PER_ELM_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0958) +#define OMAP54XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET 0x0960 +#define OMAP54XX_CM_L4PER_GPIO2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0960) +#define OMAP54XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET 0x0968 +#define OMAP54XX_CM_L4PER_GPIO3_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0968) +#define OMAP54XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET 0x0970 +#define OMAP54XX_CM_L4PER_GPIO4_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0970) +#define OMAP54XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET 0x0978 +#define OMAP54XX_CM_L4PER_GPIO5_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0978) +#define OMAP54XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET 0x0980 +#define OMAP54XX_CM_L4PER_GPIO6_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0980) +#define OMAP54XX_CM_L4PER_HDQ1W_CLKCTRL_OFFSET 0x0988 +#define OMAP54XX_CM_L4PER_HDQ1W_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0988) +#define OMAP54XX_CM_L4PER_I2C1_CLKCTRL_OFFSET 0x09a0 +#define OMAP54XX_CM_L4PER_I2C1_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09a0) +#define OMAP54XX_CM_L4PER_I2C2_CLKCTRL_OFFSET 0x09a8 +#define OMAP54XX_CM_L4PER_I2C2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09a8) +#define OMAP54XX_CM_L4PER_I2C3_CLKCTRL_OFFSET 0x09b0 +#define OMAP54XX_CM_L4PER_I2C3_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09b0) +#define OMAP54XX_CM_L4PER_I2C4_CLKCTRL_OFFSET 0x09b8 +#define OMAP54XX_CM_L4PER_I2C4_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09b8) +#define OMAP54XX_CM_L4PER_L4_PER_CLKCTRL_OFFSET 0x09c0 +#define OMAP54XX_CM_L4PER_L4_PER_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09c0) +#define OMAP54XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET 0x09f0 +#define OMAP54XX_CM_L4PER_MCSPI1_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09f0) +#define OMAP54XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET 0x09f8 +#define OMAP54XX_CM_L4PER_MCSPI2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09f8) +#define OMAP54XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET 0x0a00 +#define OMAP54XX_CM_L4PER_MCSPI3_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a00) +#define OMAP54XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET 0x0a08 +#define OMAP54XX_CM_L4PER_MCSPI4_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a08) +#define OMAP54XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET 0x0a10 +#define OMAP54XX_CM_L4PER_GPIO7_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a10) +#define OMAP54XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET 0x0a18 +#define OMAP54XX_CM_L4PER_GPIO8_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a18) +#define OMAP54XX_CM_L4PER_MMC3_CLKCTRL_OFFSET 0x0a20 +#define OMAP54XX_CM_L4PER_MMC3_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a20) +#define OMAP54XX_CM_L4PER_MMC4_CLKCTRL_OFFSET 0x0a28 +#define OMAP54XX_CM_L4PER_MMC4_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a28) +#define OMAP54XX_CM_L4PER_UART1_CLKCTRL_OFFSET 0x0a40 +#define OMAP54XX_CM_L4PER_UART1_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a40) +#define OMAP54XX_CM_L4PER_UART2_CLKCTRL_OFFSET 0x0a48 +#define OMAP54XX_CM_L4PER_UART2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a48) +#define OMAP54XX_CM_L4PER_UART3_CLKCTRL_OFFSET 0x0a50 +#define OMAP54XX_CM_L4PER_UART3_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a50) +#define OMAP54XX_CM_L4PER_UART4_CLKCTRL_OFFSET 0x0a58 +#define OMAP54XX_CM_L4PER_UART4_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a58) +#define OMAP54XX_CM_L4PER_MMC5_CLKCTRL_OFFSET 0x0a60 +#define OMAP54XX_CM_L4PER_MMC5_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a60) +#define OMAP54XX_CM_L4PER_I2C5_CLKCTRL_OFFSET 0x0a68 +#define OMAP54XX_CM_L4PER_I2C5_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a68) +#define OMAP54XX_CM_L4PER_UART5_CLKCTRL_OFFSET 0x0a70 +#define OMAP54XX_CM_L4PER_UART5_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a70) +#define OMAP54XX_CM_L4PER_UART6_CLKCTRL_OFFSET 0x0a78 +#define OMAP54XX_CM_L4PER_UART6_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a78) +#define OMAP54XX_CM_L4SEC_CLKSTCTRL_OFFSET 0x0a80 +#define OMAP54XX_CM_L4SEC_STATICDEP_OFFSET 0x0a84 +#define OMAP54XX_CM_L4SEC_DYNAMICDEP_OFFSET 0x0a88 +#define OMAP54XX_CM_L4SEC_AES1_CLKCTRL_OFFSET 0x0aa0 +#define OMAP54XX_CM_L4SEC_AES1_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0aa0) +#define OMAP54XX_CM_L4SEC_AES2_CLKCTRL_OFFSET 0x0aa8 +#define OMAP54XX_CM_L4SEC_AES2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0aa8) +#define OMAP54XX_CM_L4SEC_DES3DES_CLKCTRL_OFFSET 0x0ab0 +#define OMAP54XX_CM_L4SEC_DES3DES_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0ab0) +#define OMAP54XX_CM_L4SEC_FPKA_CLKCTRL_OFFSET 0x0ab8 +#define OMAP54XX_CM_L4SEC_FPKA_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0ab8) +#define OMAP54XX_CM_L4SEC_RNG_CLKCTRL_OFFSET 0x0ac0 +#define OMAP54XX_CM_L4SEC_RNG_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0ac0) +#define OMAP54XX_CM_L4SEC_SHA2MD5_CLKCTRL_OFFSET 0x0ac8 +#define OMAP54XX_CM_L4SEC_SHA2MD5_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0ac8) +#define OMAP54XX_CM_L4SEC_DMA_CRYPTO_CLKCTRL_OFFSET 0x0ad8 +#define OMAP54XX_CM_L4SEC_DMA_CRYPTO_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0ad8) + +/* CM_CORE.IVA_CM_CORE register offsets */ +#define OMAP54XX_CM_IVA_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_IVA_STATICDEP_OFFSET 0x0004 +#define OMAP54XX_CM_IVA_DYNAMICDEP_OFFSET 0x0008 +#define OMAP54XX_CM_IVA_IVA_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_IVA_IVA_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_IVA_INST, 0x0020) +#define OMAP54XX_CM_IVA_SL2_CLKCTRL_OFFSET 0x0028 +#define OMAP54XX_CM_IVA_SL2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_IVA_INST, 0x0028) + +/* CM_CORE.CAM_CM_CORE register offsets */ +#define OMAP54XX_CM_CAM_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_CAM_STATICDEP_OFFSET 0x0004 +#define OMAP54XX_CM_CAM_DYNAMICDEP_OFFSET 0x0008 +#define OMAP54XX_CM_CAM_ISS_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_CAM_ISS_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CAM_INST, 0x0020) +#define OMAP54XX_CM_CAM_FDIF_CLKCTRL_OFFSET 0x0028 +#define OMAP54XX_CM_CAM_FDIF_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CAM_INST, 0x0028) +#define OMAP54XX_CM_CAM_CAL_CLKCTRL_OFFSET 0x0030 +#define OMAP54XX_CM_CAM_CAL_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CAM_INST, 0x0030) + +/* CM_CORE.DSS_CM_CORE register offsets */ +#define OMAP54XX_CM_DSS_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_DSS_STATICDEP_OFFSET 0x0004 +#define OMAP54XX_CM_DSS_DYNAMICDEP_OFFSET 0x0008 +#define OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_DSS_DSS_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_DSS_INST, 0x0020) +#define OMAP54XX_CM_DSS_BB2D_CLKCTRL_OFFSET 0x0030 +#define OMAP54XX_CM_DSS_BB2D_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_DSS_INST, 0x0030) + +/* CM_CORE.GPU_CM_CORE register offsets */ +#define OMAP54XX_CM_GPU_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_GPU_STATICDEP_OFFSET 0x0004 +#define OMAP54XX_CM_GPU_DYNAMICDEP_OFFSET 0x0008 +#define OMAP54XX_CM_GPU_GPU_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_GPU_GPU_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_GPU_INST, 0x0020) + +/* CM_CORE.L3INIT_CM_CORE register offsets */ +#define OMAP54XX_CM_L3INIT_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_L3INIT_STATICDEP_OFFSET 0x0004 +#define OMAP54XX_CM_L3INIT_DYNAMICDEP_OFFSET 0x0008 +#define OMAP54XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET 0x0028 +#define OMAP54XX_CM_L3INIT_MMC1_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0028) +#define OMAP54XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET 0x0030 +#define OMAP54XX_CM_L3INIT_MMC2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0030) +#define OMAP54XX_CM_L3INIT_HSI_CLKCTRL_OFFSET 0x0038 +#define OMAP54XX_CM_L3INIT_HSI_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0038) +#define OMAP54XX_CM_L3INIT_UNIPRO2_CLKCTRL_OFFSET 0x0040 +#define OMAP54XX_CM_L3INIT_UNIPRO2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0040) +#define OMAP54XX_CM_L3INIT_MPHY_UNIPRO2_CLKCTRL_OFFSET 0x0048 +#define OMAP54XX_CM_L3INIT_MPHY_UNIPRO2_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0048) +#define OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET 0x0058 +#define OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0058) +#define OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET 0x0068 +#define OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0068) +#define OMAP54XX_CM_L3INIT_IEEE1500_2_OCP_CLKCTRL_OFFSET 0x0078 +#define OMAP54XX_CM_L3INIT_IEEE1500_2_OCP_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0078) +#define OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET 0x0088 +#define OMAP54XX_CM_L3INIT_SATA_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0088) +#define OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET 0x00e0 +#define OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x00e0) +#define OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET 0x00e8 +#define OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x00e8) +#define OMAP54XX_CM_L3INIT_USB_OTG_SS_CLKCTRL_OFFSET 0x00f0 +#define OMAP54XX_CM_L3INIT_USB_OTG_SS_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x00f0) + +/* CM_CORE.CUSTEFUSE_CM_CORE register offsets */ +#define OMAP54XX_CM_CUSTEFUSE_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CUSTEFUSE_INST, 0x0020) + +#endif diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index 64f4bafe7bd..9d1f4fcdebb 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -383,7 +383,7 @@ extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs); extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs); extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs); -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, diff --git a/arch/arm/mach-omap2/cm_44xx_54xx.h b/arch/arm/mach-omap2/cm_44xx_54xx.h new file mode 100644 index 00000000000..cbb21169032 --- /dev/null +++ b/arch/arm/mach-omap2/cm_44xx_54xx.h @@ -0,0 +1,36 @@ +/* + * OMAP44xx and OMAP54xx CM1/CM2 function prototypes + * + * Copyright (C) 2009-2013 Texas Instruments, Inc. + * Copyright (C) 2009-2010 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_44XX_54XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_44XX_55XX_H + +/* CM1 Function prototypes */ +extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx); +extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx); +extern u32 omap4_cm1_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); + +/* CM2 Function prototypes */ +extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx); +extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx); +extern u32 omap4_cm2_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); + +#endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index d555cf2459e..72cab3f4f16 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -96,6 +96,7 @@ void am33xx_init_early(void); void am35xx_init_early(void); void ti81xx_init_early(void); void am33xx_init_early(void); +void am43xx_init_early(void); void omap4430_init_early(void); void omap5_init_early(void); void omap3_init_late(void); /* Do not use this one */ @@ -237,8 +238,8 @@ extern void omap_do_wfi(void); #ifdef CONFIG_SMP /* Needed for secondary core boot */ -extern void omap_secondary_startup(void); -extern void omap_secondary_startup_4460(void); +extern void omap4_secondary_startup(void); +extern void omap4460_secondary_startup(void); extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); extern void omap_auxcoreboot_addr(u32 cpu_addr); extern u32 omap_read_auxcoreboot0(void); diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index e6c328128a0..f7d7c2ef1b4 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -358,6 +358,18 @@ #define AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH 0x2 #define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22) +/* AM33XX PWMSS Control register */ +#define AM33XX_PWMSS_TBCLK_CLKCTRL 0x664 + +/* AM33XX PWMSS Control bitfields */ +#define AM33XX_PWMSS0_TBCLKEN_SHIFT 0 +#define AM33XX_PWMSS1_TBCLKEN_SHIFT 1 +#define AM33XX_PWMSS2_TBCLKEN_SHIFT 2 + +/* DEV Feature register to identify AM33XX features */ +#define AM33XX_DEV_FEATURE 0x604 +#define AM33XX_SGX_MASK BIT(29) + /* CONTROL OMAP STATUS register to identify OMAP3 features */ #define OMAP3_CONTROL_OMAP_STATUS 0x044c diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 54e4c16ce53..2dc62a25f2c 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -55,7 +55,7 @@ int omap_type(void) if (cpu_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); - } else if (soc_is_am33xx()) { + } else if (soc_is_am33xx() || soc_is_am43xx()) { val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); } else if (cpu_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); @@ -209,6 +209,8 @@ static void __init omap3_cpuinfo(void) cpu_name = "TI816X"; } else if (soc_is_am335x()) { cpu_name = "AM335X"; + } else if (soc_is_am437x()) { + cpu_name = "AM437x"; } else if (cpu_is_ti814x()) { cpu_name = "TI814X"; } else if (omap3_has_iva() && omap3_has_sgx()) { @@ -302,6 +304,19 @@ void __init ti81xx_check_features(void) omap3_cpuinfo(); } +void __init am33xx_check_features(void) +{ + u32 status; + + omap_features = OMAP3_HAS_NEON; + + status = omap_ctrl_readl(AM33XX_DEV_FEATURE); + if (status & AM33XX_SGX_MASK) + omap_features |= OMAP3_HAS_SGX; + + omap3_cpuinfo(); +} + void __init omap3xxx_check_revision(void) { const char *cpu_rev; @@ -405,11 +420,18 @@ void __init omap3xxx_check_revision(void) cpu_rev = "1.0"; break; case 1: - /* FALLTHROUGH */ - default: omap_revision = TI8168_REV_ES1_1; cpu_rev = "1.1"; break; + case 2: + omap_revision = TI8168_REV_ES2_0; + cpu_rev = "2.0"; + break; + case 3: + /* FALLTHROUGH */ + default: + omap_revision = TI8168_REV_ES2_1; + cpu_rev = "2.1"; } break; case 0xb944: @@ -430,6 +452,10 @@ void __init omap3xxx_check_revision(void) break; } break; + case 0xb98c: + omap_revision = AM437X_REV_ES1_0; + cpu_rev = "1.0"; + break; case 0xb8f2: switch (rev) { case 0: diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 50b93df4584..fe3253a100e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -202,7 +202,7 @@ static struct map_desc omapti81xx_io_desc[] __initdata = { }; #endif -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static struct map_desc omapam33xx_io_desc[] __initdata = { { .virtual = L4_34XX_VIRT, @@ -318,7 +318,7 @@ void __init ti81xx_map_io(void) } #endif -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) void __init am33xx_map_io(void) { iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc)); @@ -576,7 +576,7 @@ void __init am33xx_init_early(void) omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE)); omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL); omap3xxx_check_revision(); - ti81xx_check_features(); + am33xx_check_features(); am33xx_powerdomains_init(); am33xx_clockdomains_init(); am33xx_hwmod_init(); @@ -585,6 +585,19 @@ void __init am33xx_init_early(void) } #endif +#ifdef CONFIG_SOC_AM43XX +void __init am43xx_init_early(void) +{ + omap2_set_globals_tap(AM335X_CLASS, + AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE)); + omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), + NULL); + omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE)); + omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL); + omap3xxx_check_revision(); +} +#endif + #ifdef CONFIG_ARCH_OMAP4 void __init omap4430_init_early(void) { @@ -630,7 +643,13 @@ void __init omap5_init_early(void) omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); omap_prm_base_init(); omap_cm_base_init(); + omap44xx_prm_init(); omap5xxx_check_revision(); + omap54xx_voltagedomains_init(); + omap54xx_powerdomains_init(); + omap54xx_clockdomains_init(); + omap54xx_hwmod_init(); + omap_hwmod_init_postsetup(); } #endif diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 0ea09faf327..4ea30811416 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -49,7 +49,7 @@ END(omap5_secondary_startup) * The primary core will update this flag using a hardware * register AuxCoreBoot0. */ -ENTRY(omap_secondary_startup) +ENTRY(omap4_secondary_startup) hold: ldr r12,=0x103 dsb smc #0 @ read from AuxCoreBoot0 @@ -64,9 +64,9 @@ hold: ldr r12,=0x103 * should now contain the SVC stack for this core */ b secondary_startup -ENDPROC(omap_secondary_startup) +ENDPROC(omap4_secondary_startup) -ENTRY(omap_secondary_startup_4460) +ENTRY(omap4460_secondary_startup) hold_2: ldr r12,=0x103 dsb smc #0 @ read from AuxCoreBoot0 @@ -101,4 +101,4 @@ hold_2: ldr r12,=0x103 * should now contain the SVC stack for this core */ b secondary_startup -ENDPROC(omap_secondary_startup_4460) +ENDPROC(omap4460_secondary_startup) diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index e80327b6c81..f993a418870 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -71,10 +71,43 @@ struct omap4_cpu_pm_info { void (*secondary_startup)(void); }; +/** + * struct cpu_pm_ops - CPU pm operations + * @finish_suspend: CPU suspend finisher function pointer + * @resume: CPU resume function pointer + * @scu_prepare: CPU Snoop Control program function pointer + * + * Structure holds functions pointer for CPU low power operations like + * suspend, resume and scu programming. + */ +struct cpu_pm_ops { + int (*finish_suspend)(unsigned long cpu_state); + void (*resume)(void); + void (*scu_prepare)(unsigned int cpu_id, unsigned int cpu_state); +}; + static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); static struct powerdomain *mpuss_pd; static void __iomem *sar_base; +static int default_finish_suspend(unsigned long cpu_state) +{ + omap_do_wfi(); + return 0; +} + +static void dummy_cpu_resume(void) +{} + +static void dummy_scu_prepare(unsigned int cpu_id, unsigned int cpu_state) +{} + +struct cpu_pm_ops omap_pm_ops = { + .finish_suspend = default_finish_suspend, + .resume = dummy_cpu_resume, + .scu_prepare = dummy_scu_prepare, +}; + /* * Program the wakeup routine address for the CPU0 and CPU1 * used for OFF or DORMANT wakeup. @@ -158,11 +191,12 @@ static void save_l2x0_context(void) { u32 val; void __iomem *l2x0_base = omap4_get_l2cache_base(); - - val = __raw_readl(l2x0_base + L2X0_AUX_CTRL); - __raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET); - val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL); - __raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET); + if (l2x0_base) { + val = __raw_readl(l2x0_base + L2X0_AUX_CTRL); + __raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET); + val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL); + __raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET); + } } #else static void save_l2x0_context(void) @@ -225,14 +259,17 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) cpu_clear_prev_logic_pwrst(cpu); pwrdm_set_next_pwrst(pm_info->pwrdm, power_state); - set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume)); - scu_pwrst_prepare(cpu, power_state); + set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.resume)); + omap_pm_ops.scu_prepare(cpu, power_state); l2x0_pwrst_prepare(cpu, save_state); /* * Call low level function with targeted low power state. */ - cpu_suspend(save_state, omap4_finish_suspend); + if (save_state) + cpu_suspend(save_state, omap_pm_ops.finish_suspend); + else + omap_pm_ops.finish_suspend(save_state); /* * Restore the CPUx power state to ON otherwise CPUx @@ -268,14 +305,14 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) pwrdm_clear_all_prev_pwrst(pm_info->pwrdm); pwrdm_set_next_pwrst(pm_info->pwrdm, power_state); set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); - scu_pwrst_prepare(cpu, power_state); + omap_pm_ops.scu_prepare(cpu, power_state); /* * CPU never retuns back if targeted power state is OFF mode. * CPU ONLINE follows normal CPU ONLINE ptah via - * omap_secondary_startup(). + * omap4_secondary_startup(). */ - omap4_finish_suspend(cpu_state); + omap_pm_ops.finish_suspend(cpu_state); pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); return 0; @@ -319,9 +356,9 @@ int __init omap4_mpuss_init(void) pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; if (cpu_is_omap446x()) - pm_info->secondary_startup = omap_secondary_startup_4460; + pm_info->secondary_startup = omap4460_secondary_startup; else - pm_info->secondary_startup = omap_secondary_startup; + pm_info->secondary_startup = omap4_secondary_startup; pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); if (!pm_info->pwrdm) { @@ -352,6 +389,12 @@ int __init omap4_mpuss_init(void) save_l2x0_context(); + if (cpu_is_omap44xx()) { + omap_pm_ops.finish_suspend = omap4_finish_suspend; + omap_pm_ops.resume = omap4_cpu_resume; + omap_pm_ops.scu_prepare = scu_pwrst_prepare; + } + return 0; } diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 2a551f997ae..98a11463a84 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -87,7 +87,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * /* * Update the AuxCoreBoot0 with boot state for secondary core. - * omap_secondary_startup() routine will hold the secondary core till + * omap4_secondary_startup() routine will hold the secondary core till * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ @@ -200,7 +200,7 @@ static void __init omap4_smp_init_cpus(void) static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) { - void *startup_addr = omap_secondary_startup; + void *startup_addr = omap4_secondary_startup; void __iomem *base = omap_get_wakeupgen_base(); /* @@ -211,7 +211,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) scu_enable(scu_base); if (cpu_is_omap446x()) { - startup_addr = omap_secondary_startup_4460; + startup_addr = omap4460_secondary_startup; pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; } diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 13b27ffaf45..38cd3a69cff 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -339,19 +339,3 @@ int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } #endif - -/** - * omap44xx_restart - trigger a software restart of the SoC - * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c - * @cmd: passed from the userspace program rebooting the system (if provided) - * - * Resets the SoC. For @cmd, see the 'reboot' syscall in - * kernel/sys.c. No return value. - */ -void omap44xx_restart(char mode, const char *cmd) -{ - /* XXX Should save 'cmd' into scratchpad for use after reboot */ - omap4_prminst_global_warm_sw_reset(); /* never returns */ - while (1); -} - diff --git a/arch/arm/mach-omap2/omap4-restart.c b/arch/arm/mach-omap2/omap4-restart.c new file mode 100644 index 00000000000..f90e02e1189 --- /dev/null +++ b/arch/arm/mach-omap2/omap4-restart.c @@ -0,0 +1,27 @@ +/* + * omap4-restart.c - Common to OMAP4 and OMAP5 + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/types.h> +#include "prminst44xx.h" + +/** + * omap44xx_restart - trigger a software restart of the SoC + * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c + * @cmd: passed from the userspace program rebooting the system (if provided) + * + * Resets the SoC. For @cmd, see the 'reboot' syscall in + * kernel/sys.c. No return value. + */ +void omap44xx_restart(char mode, const char *cmd) +{ + /* XXX Should save 'cmd' into scratchpad for use after reboot */ + omap4_prminst_global_warm_sw_reset(); /* never returns */ + while (1) + ; +} diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 0c898f58ac9..aab33fd814c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -699,6 +699,7 @@ extern int omap2420_hwmod_init(void); extern int omap2430_hwmod_init(void); extern int omap3xxx_hwmod_init(void); extern int omap44xx_hwmod_init(void); +extern int omap54xx_hwmod_init(void); extern int am33xx_hwmod_init(void); extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 3c7675a6a8f..28bbd56346a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -249,7 +249,7 @@ static struct omap_hwmod_class am33xx_gfx_hwmod_class = { }; static struct omap_hwmod_rst_info am33xx_gfx_resets[] = { - { .name = "gfx", .rst_shift = 0 }, + { .name = "gfx", .rst_shift = 0, .st_shift = 0}, }; static struct omap_hwmod am33xx_gfx_hwmod = { @@ -261,6 +261,7 @@ static struct omap_hwmod am33xx_gfx_hwmod = { .omap4 = { .clkctrl_offs = AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET, .rstctrl_offs = AM33XX_RM_GFX_RSTCTRL_OFFSET, + .rstst_offs = AM33XX_RM_GFX_RSTST_OFFSET, .modulemode = MODULEMODE_SWCTRL, }, }, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c new file mode 100644 index 00000000000..f37ae96b70a --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -0,0 +1,2150 @@ +/* + * Hardware modules present on the OMAP54xx chips + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Paul Walmsley + * Benoit Cousson + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/power/smartreflex.h> +#include <linux/i2c-omap.h> + +#include <linux/omap-dma.h> +#include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/asoc-ti-mcbsp.h> +#include <plat/dmtimer.h> + +#include "omap_hwmod.h" +#include "omap_hwmod_common_data.h" +#include "cm1_54xx.h" +#include "cm2_54xx.h" +#include "prm54xx.h" +#include "prm-regbits-54xx.h" +#include "i2c.h" +#include "mmc.h" +#include "wd_timer.h" + +/* Base offset for all OMAP5 interrupts external to MPUSS */ +#define OMAP54XX_IRQ_GIC_START 32 + +/* Base offset for all OMAP5 dma requests */ +#define OMAP54XX_DMA_REQ_START 1 + + +/* + * IP blocks + */ + +/* + * 'dmm' class + * instance(s): dmm + */ +static struct omap_hwmod_class omap54xx_dmm_hwmod_class = { + .name = "dmm", +}; + +/* dmm */ +static struct omap_hwmod omap54xx_dmm_hwmod = { + .name = "dmm", + .class = &omap54xx_dmm_hwmod_class, + .clkdm_name = "emif_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_EMIF_DMM_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_EMIF_DMM_CONTEXT_OFFSET, + }, + }, +}; + +/* + * 'l3' class + * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3 + */ +static struct omap_hwmod_class omap54xx_l3_hwmod_class = { + .name = "l3", +}; + +/* l3_instr */ +static struct omap_hwmod omap54xx_l3_instr_hwmod = { + .name = "l3_instr", + .class = &omap54xx_l3_hwmod_class, + .clkdm_name = "l3instr_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* l3_main_1 */ +static struct omap_hwmod omap54xx_l3_main_1_hwmod = { + .name = "l3_main_1", + .class = &omap54xx_l3_hwmod_class, + .clkdm_name = "l3main1_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET, + }, + }, +}; + +/* l3_main_2 */ +static struct omap_hwmod omap54xx_l3_main_2_hwmod = { + .name = "l3_main_2", + .class = &omap54xx_l3_hwmod_class, + .clkdm_name = "l3main2_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3MAIN2_L3_MAIN_2_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3MAIN2_L3_MAIN_2_CONTEXT_OFFSET, + }, + }, +}; + +/* l3_main_3 */ +static struct omap_hwmod omap54xx_l3_main_3_hwmod = { + .name = "l3_main_3", + .class = &omap54xx_l3_hwmod_class, + .clkdm_name = "l3instr_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_MAIN_3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INSTR_L3_MAIN_3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* + * 'l4' class + * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup + */ +static struct omap_hwmod_class omap54xx_l4_hwmod_class = { + .name = "l4", +}; + +/* l4_abe */ +static struct omap_hwmod omap54xx_l4_abe_hwmod = { + .name = "l4_abe", + .class = &omap54xx_l4_hwmod_class, + .clkdm_name = "abe_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_ABE_L4_ABE_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, +}; + +/* l4_cfg */ +static struct omap_hwmod omap54xx_l4_cfg_hwmod = { + .name = "l4_cfg", + .class = &omap54xx_l4_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET, + }, + }, +}; + +/* l4_per */ +static struct omap_hwmod omap54xx_l4_per_hwmod = { + .name = "l4_per", + .class = &omap54xx_l4_hwmod_class, + .clkdm_name = "l4per_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_L4_PER_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_L4_PER_CONTEXT_OFFSET, + }, + }, +}; + +/* l4_wkup */ +static struct omap_hwmod omap54xx_l4_wkup_hwmod = { + .name = "l4_wkup", + .class = &omap54xx_l4_hwmod_class, + .clkdm_name = "wkupaon_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET, + }, + }, +}; + +/* + * 'mpu_bus' class + * instance(s): mpu_private + */ +static struct omap_hwmod_class omap54xx_mpu_bus_hwmod_class = { + .name = "mpu_bus", +}; + +/* mpu_private */ +static struct omap_hwmod omap54xx_mpu_private_hwmod = { + .name = "mpu_private", + .class = &omap54xx_mpu_bus_hwmod_class, + .clkdm_name = "mpu_clkdm", + .prcm = { + .omap4 = { + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, +}; + +/* + * 'counter' class + * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock + */ + +static struct omap_hwmod_class_sysconfig omap54xx_counter_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_counter_hwmod_class = { + .name = "counter", + .sysc = &omap54xx_counter_sysc, +}; + +/* counter_32k */ +static struct omap_hwmod omap54xx_counter_32k_hwmod = { + .name = "counter_32k", + .class = &omap54xx_counter_hwmod_class, + .clkdm_name = "wkupaon_clkdm", + .flags = HWMOD_SWSUP_SIDLE, + .main_clk = "wkupaon_iclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET, + }, + }, +}; + +/* + * 'dma' class + * dma controller for data exchange between memory to memory (i.e. internal or + * external memory) and gp peripherals to memory or memory to gp peripherals + */ + +static struct omap_hwmod_class_sysconfig omap54xx_dma_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x002c, + .syss_offs = 0x0028, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_dma_hwmod_class = { + .name = "dma", + .sysc = &omap54xx_dma_sysc, +}; + +/* dma dev_attr */ +static struct omap_dma_dev_attr dma_dev_attr = { + .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY | + IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY, + .lch_count = 32, +}; + +/* dma_system */ +static struct omap_hwmod_irq_info omap54xx_dma_system_irqs[] = { + { .name = "0", .irq = 12 + OMAP54XX_IRQ_GIC_START }, + { .name = "1", .irq = 13 + OMAP54XX_IRQ_GIC_START }, + { .name = "2", .irq = 14 + OMAP54XX_IRQ_GIC_START }, + { .name = "3", .irq = 15 + OMAP54XX_IRQ_GIC_START }, + { .irq = -1 } +}; + +static struct omap_hwmod omap54xx_dma_system_hwmod = { + .name = "dma_system", + .class = &omap54xx_dma_hwmod_class, + .clkdm_name = "dma_clkdm", + .mpu_irqs = omap54xx_dma_system_irqs, + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET, + }, + }, + .dev_attr = &dma_dev_attr, +}; + +/* + * 'dmic' class + * digital microphone controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_dmic_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_dmic_hwmod_class = { + .name = "dmic", + .sysc = &omap54xx_dmic_sysc, +}; + +/* dmic */ +static struct omap_hwmod omap54xx_dmic_hwmod = { + .name = "dmic", + .class = &omap54xx_dmic_hwmod_class, + .clkdm_name = "abe_clkdm", + .main_clk = "dmic_gfclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_ABE_DMIC_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_ABE_DMIC_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'emif' class + * external memory interface no1 (wrapper) + */ + +static struct omap_hwmod_class_sysconfig omap54xx_emif_sysc = { + .rev_offs = 0x0000, +}; + +static struct omap_hwmod_class omap54xx_emif_hwmod_class = { + .name = "emif", + .sysc = &omap54xx_emif_sysc, +}; + +/* emif1 */ +static struct omap_hwmod omap54xx_emif1_hwmod = { + .name = "emif1", + .class = &omap54xx_emif_hwmod_class, + .clkdm_name = "emif_clkdm", + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .main_clk = "dpll_core_h11x2_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_EMIF_EMIF1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* emif2 */ +static struct omap_hwmod omap54xx_emif2_hwmod = { + .name = "emif2", + .class = &omap54xx_emif_hwmod_class, + .clkdm_name = "emif_clkdm", + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .main_clk = "dpll_core_h11x2_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_EMIF_EMIF2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* + * 'gpio' class + * general purpose io module + */ + +static struct omap_hwmod_class_sysconfig omap54xx_gpio_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0114, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_gpio_hwmod_class = { + .name = "gpio", + .sysc = &omap54xx_gpio_sysc, + .rev = 2, +}; + +/* gpio dev_attr */ +static struct omap_gpio_dev_attr gpio_dev_attr = { + .bank_width = 32, + .dbck_flag = true, +}; + +/* gpio1 */ +static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { + { .role = "dbclk", .clk = "gpio1_dbclk" }, +}; + +static struct omap_hwmod omap54xx_gpio1_hwmod = { + .name = "gpio1", + .class = &omap54xx_gpio_hwmod_class, + .clkdm_name = "wkupaon_clkdm", + .main_clk = "wkupaon_iclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .opt_clks = gpio1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* gpio2 */ +static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { + { .role = "dbclk", .clk = "gpio2_dbclk" }, +}; + +static struct omap_hwmod omap54xx_gpio2_hwmod = { + .name = "gpio2", + .class = &omap54xx_gpio_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_GPIO2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .opt_clks = gpio2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* gpio3 */ +static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { + { .role = "dbclk", .clk = "gpio3_dbclk" }, +}; + +static struct omap_hwmod omap54xx_gpio3_hwmod = { + .name = "gpio3", + .class = &omap54xx_gpio_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_GPIO3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .opt_clks = gpio3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* gpio4 */ +static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { + { .role = "dbclk", .clk = "gpio4_dbclk" }, +}; + +static struct omap_hwmod omap54xx_gpio4_hwmod = { + .name = "gpio4", + .class = &omap54xx_gpio_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_GPIO4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .opt_clks = gpio4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* gpio5 */ +static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { + { .role = "dbclk", .clk = "gpio5_dbclk" }, +}; + +static struct omap_hwmod omap54xx_gpio5_hwmod = { + .name = "gpio5", + .class = &omap54xx_gpio_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_GPIO5_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .opt_clks = gpio5_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* gpio6 */ +static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { + { .role = "dbclk", .clk = "gpio6_dbclk" }, +}; + +static struct omap_hwmod omap54xx_gpio6_hwmod = { + .name = "gpio6", + .class = &omap54xx_gpio_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_GPIO6_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .opt_clks = gpio6_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* gpio7 */ +static struct omap_hwmod_opt_clk gpio7_opt_clks[] = { + { .role = "dbclk", .clk = "gpio7_dbclk" }, +}; + +static struct omap_hwmod omap54xx_gpio7_hwmod = { + .name = "gpio7", + .class = &omap54xx_gpio_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_GPIO7_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .opt_clks = gpio7_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio7_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* gpio8 */ +static struct omap_hwmod_opt_clk gpio8_opt_clks[] = { + { .role = "dbclk", .clk = "gpio8_dbclk" }, +}; + +static struct omap_hwmod omap54xx_gpio8_hwmod = { + .name = "gpio8", + .class = &omap54xx_gpio_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_GPIO8_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .opt_clks = gpio8_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio8_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* + * 'i2c' class + * multimaster high-speed i2c controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_i2c_sysc = { + .sysc_offs = 0x0010, + .syss_offs = 0x0090, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .clockact = CLOCKACT_TEST_ICLK, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_i2c_hwmod_class = { + .name = "i2c", + .sysc = &omap54xx_i2c_sysc, + .reset = &omap_i2c_reset, + .rev = OMAP_I2C_IP_VERSION_2, +}; + +/* i2c dev_attr */ +static struct omap_i2c_dev_attr i2c_dev_attr = { + .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE, +}; + +/* i2c1 */ +static struct omap_hwmod omap54xx_i2c1_hwmod = { + .name = "i2c1", + .class = &omap54xx_i2c_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, + .main_clk = "func_96m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_I2C1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_I2C1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &i2c_dev_attr, +}; + +/* i2c2 */ +static struct omap_hwmod omap54xx_i2c2_hwmod = { + .name = "i2c2", + .class = &omap54xx_i2c_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, + .main_clk = "func_96m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_I2C2_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_I2C2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &i2c_dev_attr, +}; + +/* i2c3 */ +static struct omap_hwmod omap54xx_i2c3_hwmod = { + .name = "i2c3", + .class = &omap54xx_i2c_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, + .main_clk = "func_96m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_I2C3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_I2C3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &i2c_dev_attr, +}; + +/* i2c4 */ +static struct omap_hwmod omap54xx_i2c4_hwmod = { + .name = "i2c4", + .class = &omap54xx_i2c_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, + .main_clk = "func_96m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_I2C4_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_I2C4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &i2c_dev_attr, +}; + +/* i2c5 */ +static struct omap_hwmod omap54xx_i2c5_hwmod = { + .name = "i2c5", + .class = &omap54xx_i2c_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, + .main_clk = "func_96m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_I2C5_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_I2C5_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &i2c_dev_attr, +}; + +/* + * 'kbd' class + * keyboard controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_kbd_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_kbd_hwmod_class = { + .name = "kbd", + .sysc = &omap54xx_kbd_sysc, +}; + +/* kbd */ +static struct omap_hwmod omap54xx_kbd_hwmod = { + .name = "kbd", + .class = &omap54xx_kbd_hwmod_class, + .clkdm_name = "wkupaon_clkdm", + .main_clk = "sys_32k_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_WKUPAON_KBD_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_WKUPAON_KBD_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'mcbsp' class + * multi channel buffered serial port controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_mcbsp_sysc = { + .sysc_offs = 0x008c, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_mcbsp_hwmod_class = { + .name = "mcbsp", + .sysc = &omap54xx_mcbsp_sysc, + .rev = MCBSP_CONFIG_TYPE4, +}; + +/* mcbsp1 */ +static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" }, +}; + +static struct omap_hwmod omap54xx_mcbsp1_hwmod = { + .name = "mcbsp1", + .class = &omap54xx_mcbsp_hwmod_class, + .clkdm_name = "abe_clkdm", + .main_clk = "mcbsp1_gfclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_ABE_MCBSP1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_ABE_MCBSP1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = mcbsp1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks), +}; + +/* mcbsp2 */ +static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" }, +}; + +static struct omap_hwmod omap54xx_mcbsp2_hwmod = { + .name = "mcbsp2", + .class = &omap54xx_mcbsp_hwmod_class, + .clkdm_name = "abe_clkdm", + .main_clk = "mcbsp2_gfclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_ABE_MCBSP2_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_ABE_MCBSP2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = mcbsp2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks), +}; + +/* mcbsp3 */ +static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" }, +}; + +static struct omap_hwmod omap54xx_mcbsp3_hwmod = { + .name = "mcbsp3", + .class = &omap54xx_mcbsp_hwmod_class, + .clkdm_name = "abe_clkdm", + .main_clk = "mcbsp3_gfclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_ABE_MCBSP3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_ABE_MCBSP3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = mcbsp3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks), +}; + +/* + * 'mcpdm' class + * multi channel pdm controller (proprietary interface with phoenix power + * ic) + */ + +static struct omap_hwmod_class_sysconfig omap54xx_mcpdm_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_mcpdm_hwmod_class = { + .name = "mcpdm", + .sysc = &omap54xx_mcpdm_sysc, +}; + +/* mcpdm */ +static struct omap_hwmod omap54xx_mcpdm_hwmod = { + .name = "mcpdm", + .class = &omap54xx_mcpdm_hwmod_class, + .clkdm_name = "abe_clkdm", + /* + * It's suspected that the McPDM requires an off-chip main + * functional clock, controlled via I2C. This IP block is + * currently reset very early during boot, before I2C is + * available, so it doesn't seem that we have any choice in + * the kernel other than to avoid resetting it. XXX This is + * really a hardware issue workaround: every IP block should + * be able to source its main functional clock from either + * on-chip or off-chip sources. McPDM seems to be the only + * current exception. + */ + + .flags = HWMOD_EXT_OPT_MAIN_CLK, + .main_clk = "pad_clks_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_ABE_MCPDM_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_ABE_MCPDM_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'mcspi' class + * multichannel serial port interface (mcspi) / master/slave synchronous serial + * bus + */ + +static struct omap_hwmod_class_sysconfig omap54xx_mcspi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_mcspi_hwmod_class = { + .name = "mcspi", + .sysc = &omap54xx_mcspi_sysc, + .rev = OMAP4_MCSPI_REV, +}; + +/* mcspi1 */ +/* mcspi1 dev_attr */ +static struct omap2_mcspi_dev_attr mcspi1_dev_attr = { + .num_chipselect = 4, +}; + +static struct omap_hwmod omap54xx_mcspi1_hwmod = { + .name = "mcspi1", + .class = &omap54xx_mcspi_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mcspi1_dev_attr, +}; + +/* mcspi2 */ +/* mcspi2 dev_attr */ +static struct omap2_mcspi_dev_attr mcspi2_dev_attr = { + .num_chipselect = 2, +}; + +static struct omap_hwmod omap54xx_mcspi2_hwmod = { + .name = "mcspi2", + .class = &omap54xx_mcspi_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mcspi2_dev_attr, +}; + +/* mcspi3 */ +/* mcspi3 dev_attr */ +static struct omap2_mcspi_dev_attr mcspi3_dev_attr = { + .num_chipselect = 2, +}; + +static struct omap_hwmod omap54xx_mcspi3_hwmod = { + .name = "mcspi3", + .class = &omap54xx_mcspi_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mcspi3_dev_attr, +}; + +/* mcspi4 */ +/* mcspi4 dev_attr */ +static struct omap2_mcspi_dev_attr mcspi4_dev_attr = { + .num_chipselect = 1, +}; + +static struct omap_hwmod omap54xx_mcspi4_hwmod = { + .name = "mcspi4", + .class = &omap54xx_mcspi_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mcspi4_dev_attr, +}; + +/* + * 'mmc' class + * multimedia card high-speed/sd/sdio (mmc/sd/sdio) host controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_mmc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_mmc_hwmod_class = { + .name = "mmc", + .sysc = &omap54xx_mmc_sysc, +}; + +/* mmc1 */ +static struct omap_hwmod_opt_clk mmc1_opt_clks[] = { + { .role = "32khz_clk", .clk = "mmc1_32khz_clk" }, +}; + +/* mmc1 dev_attr */ +static struct omap_mmc_dev_attr mmc1_dev_attr = { + .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, +}; + +static struct omap_hwmod omap54xx_mmc1_hwmod = { + .name = "mmc1", + .class = &omap54xx_mmc_hwmod_class, + .clkdm_name = "l3init_clkdm", + .main_clk = "mmc1_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_MMC1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = mmc1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mmc1_opt_clks), + .dev_attr = &mmc1_dev_attr, +}; + +/* mmc2 */ +static struct omap_hwmod omap54xx_mmc2_hwmod = { + .name = "mmc2", + .class = &omap54xx_mmc_hwmod_class, + .clkdm_name = "l3init_clkdm", + .main_clk = "mmc2_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_MMC2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* mmc3 */ +static struct omap_hwmod omap54xx_mmc3_hwmod = { + .name = "mmc3", + .class = &omap54xx_mmc_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_MMC3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_MMC3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* mmc4 */ +static struct omap_hwmod omap54xx_mmc4_hwmod = { + .name = "mmc4", + .class = &omap54xx_mmc_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_MMC4_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_MMC4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* mmc5 */ +static struct omap_hwmod omap54xx_mmc5_hwmod = { + .name = "mmc5", + .class = &omap54xx_mmc_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_96m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_MMC5_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_MMC5_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'mpu' class + * mpu sub-system + */ + +static struct omap_hwmod_class omap54xx_mpu_hwmod_class = { + .name = "mpu", +}; + +/* mpu */ +static struct omap_hwmod omap54xx_mpu_hwmod = { + .name = "mpu", + .class = &omap54xx_mpu_hwmod_class, + .clkdm_name = "mpu_clkdm", + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .main_clk = "dpll_mpu_m2_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_MPU_MPU_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_MPU_MPU_CONTEXT_OFFSET, + }, + }, +}; + +/* + * 'timer' class + * general purpose timer module with accurate 1ms tick + * This class contains several variants: ['timer_1ms', 'timer'] + */ + +static struct omap_hwmod_class_sysconfig omap54xx_timer_1ms_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, + .clockact = CLOCKACT_TEST_ICLK, +}; + +static struct omap_hwmod_class omap54xx_timer_1ms_hwmod_class = { + .name = "timer", + .sysc = &omap54xx_timer_1ms_sysc, +}; + +static struct omap_hwmod_class_sysconfig omap54xx_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_timer_hwmod_class = { + .name = "timer", + .sysc = &omap54xx_timer_sysc, +}; + +/* timer1 */ +static struct omap_hwmod omap54xx_timer1_hwmod = { + .name = "timer1", + .class = &omap54xx_timer_1ms_hwmod_class, + .clkdm_name = "wkupaon_clkdm", + .main_clk = "timer1_gfclk_mux", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer2 */ +static struct omap_hwmod omap54xx_timer2_hwmod = { + .name = "timer2", + .class = &omap54xx_timer_1ms_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "timer2_gfclk_mux", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_TIMER2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer3 */ +static struct omap_hwmod omap54xx_timer3_hwmod = { + .name = "timer3", + .class = &omap54xx_timer_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "timer3_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_TIMER3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer4 */ +static struct omap_hwmod omap54xx_timer4_hwmod = { + .name = "timer4", + .class = &omap54xx_timer_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "timer4_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_TIMER4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer5 */ +static struct omap_hwmod omap54xx_timer5_hwmod = { + .name = "timer5", + .class = &omap54xx_timer_hwmod_class, + .clkdm_name = "abe_clkdm", + .main_clk = "timer5_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_ABE_TIMER5_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_ABE_TIMER5_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer6 */ +static struct omap_hwmod omap54xx_timer6_hwmod = { + .name = "timer6", + .class = &omap54xx_timer_hwmod_class, + .clkdm_name = "abe_clkdm", + .main_clk = "timer6_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_ABE_TIMER6_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_ABE_TIMER6_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer7 */ +static struct omap_hwmod omap54xx_timer7_hwmod = { + .name = "timer7", + .class = &omap54xx_timer_hwmod_class, + .clkdm_name = "abe_clkdm", + .main_clk = "timer7_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_ABE_TIMER7_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_ABE_TIMER7_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer8 */ +static struct omap_hwmod omap54xx_timer8_hwmod = { + .name = "timer8", + .class = &omap54xx_timer_hwmod_class, + .clkdm_name = "abe_clkdm", + .main_clk = "timer8_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_ABE_TIMER8_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_ABE_TIMER8_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer9 */ +static struct omap_hwmod omap54xx_timer9_hwmod = { + .name = "timer9", + .class = &omap54xx_timer_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "timer9_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_TIMER9_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer10 */ +static struct omap_hwmod omap54xx_timer10_hwmod = { + .name = "timer10", + .class = &omap54xx_timer_1ms_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "timer10_gfclk_mux", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_TIMER10_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer11 */ +static struct omap_hwmod omap54xx_timer11_hwmod = { + .name = "timer11", + .class = &omap54xx_timer_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "timer11_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_TIMER11_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'uart' class + * universal asynchronous receiver/transmitter (uart) + */ + +static struct omap_hwmod_class_sysconfig omap54xx_uart_sysc = { + .rev_offs = 0x0050, + .sysc_offs = 0x0054, + .syss_offs = 0x0058, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_uart_hwmod_class = { + .name = "uart", + .sysc = &omap54xx_uart_sysc, +}; + +/* uart1 */ +static struct omap_hwmod omap54xx_uart1_hwmod = { + .name = "uart1", + .class = &omap54xx_uart_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_UART1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_UART1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart2 */ +static struct omap_hwmod omap54xx_uart2_hwmod = { + .name = "uart2", + .class = &omap54xx_uart_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_UART2_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_UART2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart3 */ +static struct omap_hwmod omap54xx_uart3_hwmod = { + .name = "uart3", + .class = &omap54xx_uart_hwmod_class, + .clkdm_name = "l4per_clkdm", + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_UART3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_UART3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart4 */ +static struct omap_hwmod omap54xx_uart4_hwmod = { + .name = "uart4", + .class = &omap54xx_uart_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_UART4_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_UART4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart5 */ +static struct omap_hwmod omap54xx_uart5_hwmod = { + .name = "uart5", + .class = &omap54xx_uart_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_UART5_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_UART5_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart6 */ +static struct omap_hwmod omap54xx_uart6_hwmod = { + .name = "uart6", + .class = &omap54xx_uart_hwmod_class, + .clkdm_name = "l4per_clkdm", + .main_clk = "func_48m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4PER_UART6_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4PER_UART6_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'usb_otg_ss' class + * 2.0 super speed (usb_otg_ss) controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_usb_otg_ss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_usb_otg_ss_hwmod_class = { + .name = "usb_otg_ss", + .sysc = &omap54xx_usb_otg_ss_sysc, +}; + +/* usb_otg_ss */ +static struct omap_hwmod_opt_clk usb_otg_ss_opt_clks[] = { + { .role = "refclk960m", .clk = "usb_otg_ss_refclk960m" }, +}; + +static struct omap_hwmod omap54xx_usb_otg_ss_hwmod = { + .name = "usb_otg_ss", + .class = &omap54xx_usb_otg_ss_hwmod_class, + .clkdm_name = "l3init_clkdm", + .flags = HWMOD_SWSUP_SIDLE, + .main_clk = "dpll_core_h13x2_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_USB_OTG_SS_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_USB_OTG_SS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .opt_clks = usb_otg_ss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(usb_otg_ss_opt_clks), +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap54xx_wd_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap54xx_wd_timer_sysc, + .pre_shutdown = &omap2_wd_timer_disable, +}; + +/* wd_timer2 */ +static struct omap_hwmod omap54xx_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap54xx_wd_timer_hwmod_class, + .clkdm_name = "wkupaon_clkdm", + .main_clk = "sys_32k_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + + +/* + * Interfaces + */ + +/* l3_main_1 -> dmm */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_1__dmm = { + .master = &omap54xx_l3_main_1_hwmod, + .slave = &omap54xx_dmm_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_SDMA, +}; + +/* l3_main_3 -> l3_instr */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_3__l3_instr = { + .master = &omap54xx_l3_main_3_hwmod, + .slave = &omap54xx_l3_instr_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_1 = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_l3_main_1_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_l3_main_1_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = { + .master = &omap54xx_mpu_hwmod, + .slave = &omap54xx_l3_main_1_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + +/* l3_main_1 -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_2 = { + .master = &omap54xx_l3_main_1_hwmod, + .slave = &omap54xx_l3_main_2_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + +/* l4_cfg -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_l3_main_2_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = { + .master = &omap54xx_l3_main_1_hwmod, + .slave = &omap54xx_l3_main_3_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + +/* l3_main_2 -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_3 = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_l3_main_3_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_3 = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_l3_main_3_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> l4_abe */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_abe = { + .master = &omap54xx_l3_main_1_hwmod, + .slave = &omap54xx_l4_abe_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> l4_abe */ +static struct omap_hwmod_ocp_if omap54xx_mpu__l4_abe = { + .master = &omap54xx_mpu_hwmod, + .slave = &omap54xx_l4_abe_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> l4_cfg */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_cfg = { + .master = &omap54xx_l3_main_1_hwmod, + .slave = &omap54xx_l4_cfg_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> l4_per */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l4_per = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_l4_per_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> l4_wkup */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_wkup = { + .master = &omap54xx_l3_main_1_hwmod, + .slave = &omap54xx_l4_wkup_hwmod, + .clk = "wkupaon_iclk_mux", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> mpu_private */ +static struct omap_hwmod_ocp_if omap54xx_mpu__mpu_private = { + .master = &omap54xx_mpu_hwmod, + .slave = &omap54xx_mpu_private_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> counter_32k */ +static struct omap_hwmod_ocp_if omap54xx_l4_wkup__counter_32k = { + .master = &omap54xx_l4_wkup_hwmod, + .slave = &omap54xx_counter_32k_hwmod, + .clk = "wkupaon_iclk_mux", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap54xx_dma_system_addrs[] = { + { + .pa_start = 0x4a056000, + .pa_end = 0x4a056fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_cfg -> dma_system */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__dma_system = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_dma_system_hwmod, + .clk = "l4_root_clk_div", + .addr = omap54xx_dma_system_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_abe -> dmic */ +static struct omap_hwmod_ocp_if omap54xx_l4_abe__dmic = { + .master = &omap54xx_l4_abe_hwmod, + .slave = &omap54xx_dmic_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU, +}; + +/* mpu -> emif1 */ +static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = { + .master = &omap54xx_mpu_hwmod, + .slave = &omap54xx_emif1_hwmod, + .clk = "dpll_core_h11x2_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> emif2 */ +static struct omap_hwmod_ocp_if omap54xx_mpu__emif2 = { + .master = &omap54xx_mpu_hwmod, + .slave = &omap54xx_emif2_hwmod, + .clk = "dpll_core_h11x2_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_wkup__gpio1 = { + .master = &omap54xx_l4_wkup_hwmod, + .slave = &omap54xx_gpio1_hwmod, + .clk = "wkupaon_iclk_mux", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio2 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio2 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_gpio2_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio3 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_gpio3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio4 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio4 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_gpio4_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio5 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio5 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_gpio5_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio6 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio6 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_gpio6_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio7 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio7 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_gpio7_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio8 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio8 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_gpio8_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> i2c1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c1 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_i2c1_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> i2c2 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c2 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_i2c2_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> i2c3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c3 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_i2c3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> i2c4 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c4 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_i2c4_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> i2c5 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c5 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_i2c5_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> kbd */ +static struct omap_hwmod_ocp_if omap54xx_l4_wkup__kbd = { + .master = &omap54xx_l4_wkup_hwmod, + .slave = &omap54xx_kbd_hwmod, + .clk = "wkupaon_iclk_mux", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_abe -> mcbsp1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp1 = { + .master = &omap54xx_l4_abe_hwmod, + .slave = &omap54xx_mcbsp1_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU, +}; + +/* l4_abe -> mcbsp2 */ +static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp2 = { + .master = &omap54xx_l4_abe_hwmod, + .slave = &omap54xx_mcbsp2_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU, +}; + +/* l4_abe -> mcbsp3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp3 = { + .master = &omap54xx_l4_abe_hwmod, + .slave = &omap54xx_mcbsp3_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU, +}; + +/* l4_abe -> mcpdm */ +static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcpdm = { + .master = &omap54xx_l4_abe_hwmod, + .slave = &omap54xx_mcpdm_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU, +}; + +/* l4_per -> mcspi1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi1 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_mcspi1_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> mcspi2 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi2 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_mcspi2_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> mcspi3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi3 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_mcspi3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> mcspi4 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi4 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_mcspi4_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> mmc1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc1 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_mmc1_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> mmc2 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc2 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_mmc2_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> mmc3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc3 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_mmc3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> mmc4 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc4 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_mmc4_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> mmc5 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc5 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_mmc5_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> mpu */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_mpu_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> timer1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = { + .master = &omap54xx_l4_wkup_hwmod, + .slave = &omap54xx_timer1_hwmod, + .clk = "wkupaon_iclk_mux", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> timer2 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__timer2 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_timer2_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> timer3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__timer3 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_timer3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> timer4 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__timer4 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_timer4_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_abe -> timer5 */ +static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer5 = { + .master = &omap54xx_l4_abe_hwmod, + .slave = &omap54xx_timer5_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU, +}; + +/* l4_abe -> timer6 */ +static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer6 = { + .master = &omap54xx_l4_abe_hwmod, + .slave = &omap54xx_timer6_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU, +}; + +/* l4_abe -> timer7 */ +static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer7 = { + .master = &omap54xx_l4_abe_hwmod, + .slave = &omap54xx_timer7_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU, +}; + +/* l4_abe -> timer8 */ +static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer8 = { + .master = &omap54xx_l4_abe_hwmod, + .slave = &omap54xx_timer8_hwmod, + .clk = "abe_iclk", + .user = OCP_USER_MPU, +}; + +/* l4_per -> timer9 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__timer9 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_timer9_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> timer10 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__timer10 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_timer10_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> timer11 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__timer11 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_timer11_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> uart1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__uart1 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_uart1_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> uart2 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__uart2 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_uart2_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> uart3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__uart3 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_uart3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> uart4 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__uart4 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_uart4_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> uart5 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__uart5 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_uart5_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> uart6 */ +static struct omap_hwmod_ocp_if omap54xx_l4_per__uart6 = { + .master = &omap54xx_l4_per_hwmod, + .slave = &omap54xx_uart6_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> usb_otg_ss */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_usb_otg_ss_hwmod, + .clk = "dpll_core_h13x2_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_ocp_if omap54xx_l4_wkup__wd_timer2 = { + .master = &omap54xx_l4_wkup_hwmod, + .slave = &omap54xx_wd_timer2_hwmod, + .clk = "wkupaon_iclk_mux", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { + &omap54xx_l3_main_1__dmm, + &omap54xx_l3_main_3__l3_instr, + &omap54xx_l3_main_2__l3_main_1, + &omap54xx_l4_cfg__l3_main_1, + &omap54xx_mpu__l3_main_1, + &omap54xx_l3_main_1__l3_main_2, + &omap54xx_l4_cfg__l3_main_2, + &omap54xx_l3_main_1__l3_main_3, + &omap54xx_l3_main_2__l3_main_3, + &omap54xx_l4_cfg__l3_main_3, + &omap54xx_l3_main_1__l4_abe, + &omap54xx_mpu__l4_abe, + &omap54xx_l3_main_1__l4_cfg, + &omap54xx_l3_main_2__l4_per, + &omap54xx_l3_main_1__l4_wkup, + &omap54xx_mpu__mpu_private, + &omap54xx_l4_wkup__counter_32k, + &omap54xx_l4_cfg__dma_system, + &omap54xx_l4_abe__dmic, + &omap54xx_mpu__emif1, + &omap54xx_mpu__emif2, + &omap54xx_l4_wkup__gpio1, + &omap54xx_l4_per__gpio2, + &omap54xx_l4_per__gpio3, + &omap54xx_l4_per__gpio4, + &omap54xx_l4_per__gpio5, + &omap54xx_l4_per__gpio6, + &omap54xx_l4_per__gpio7, + &omap54xx_l4_per__gpio8, + &omap54xx_l4_per__i2c1, + &omap54xx_l4_per__i2c2, + &omap54xx_l4_per__i2c3, + &omap54xx_l4_per__i2c4, + &omap54xx_l4_per__i2c5, + &omap54xx_l4_wkup__kbd, + &omap54xx_l4_abe__mcbsp1, + &omap54xx_l4_abe__mcbsp2, + &omap54xx_l4_abe__mcbsp3, + &omap54xx_l4_abe__mcpdm, + &omap54xx_l4_per__mcspi1, + &omap54xx_l4_per__mcspi2, + &omap54xx_l4_per__mcspi3, + &omap54xx_l4_per__mcspi4, + &omap54xx_l4_per__mmc1, + &omap54xx_l4_per__mmc2, + &omap54xx_l4_per__mmc3, + &omap54xx_l4_per__mmc4, + &omap54xx_l4_per__mmc5, + &omap54xx_l4_cfg__mpu, + &omap54xx_l4_wkup__timer1, + &omap54xx_l4_per__timer2, + &omap54xx_l4_per__timer3, + &omap54xx_l4_per__timer4, + &omap54xx_l4_abe__timer5, + &omap54xx_l4_abe__timer6, + &omap54xx_l4_abe__timer7, + &omap54xx_l4_abe__timer8, + &omap54xx_l4_per__timer9, + &omap54xx_l4_per__timer10, + &omap54xx_l4_per__timer11, + &omap54xx_l4_per__uart1, + &omap54xx_l4_per__uart2, + &omap54xx_l4_per__uart3, + &omap54xx_l4_per__uart4, + &omap54xx_l4_per__uart5, + &omap54xx_l4_per__uart6, + &omap54xx_l4_cfg__usb_otg_ss, + &omap54xx_l4_wkup__wd_timer2, + NULL, +}; + +int __init omap54xx_hwmod_init(void) +{ + omap_hwmod_init(); + return omap_hwmod_register_links(omap54xx_hwmod_ocp_ifs); +} diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index a251f87fa2a..82f0698933d 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -1,7 +1,7 @@ /* - * OMAP4 Power Management Routines + * OMAP4+ Power Management Routines * - * Copyright (C) 2010-2011 Texas Instruments, Inc. + * Copyright (C) 2010-2013 Texas Instruments, Inc. * Rajendra Nayak <rnayak@ti.com> * Santosh Shilimkar <santosh.shilimkar@ti.com> * @@ -135,16 +135,16 @@ static void omap_default_idle(void) } /** - * omap4_pm_init - Init routine for OMAP4 PM + * omap4_init_static_deps - Add OMAP4 static dependencies * - * Initializes all powerdomain and clockdomain target states - * and all PRCM settings. + * Add needed static clockdomain dependencies on OMAP4 devices. + * Return: 0 on success or 'err' on failures */ -int __init omap4_pm_init(void) +static inline int omap4_init_static_deps(void) { - int ret; struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; struct clockdomain *ducati_clkdm, *l3_2_clkdm; + int ret = 0; if (omap_rev() == OMAP4430_REV_ES1_0) { WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); @@ -163,7 +163,7 @@ int __init omap4_pm_init(void) ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { pr_err("Failed to setup powerdomains\n"); - goto err2; + return ret; } /* @@ -171,6 +171,10 @@ int __init omap4_pm_init(void) * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as * expected. The hardware recommendation is to enable static * dependencies for these to avoid system lock ups or random crashes. + * The L4 wakeup depedency is added to workaround the OCP sync hardware + * BUG with 32K synctimer which lead to incorrect timer value read + * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which + * are part of L4 wakeup clockdomain. */ mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); emif_clkdm = clkdm_lookup("l3_emif_clkdm"); @@ -179,7 +183,7 @@ int __init omap4_pm_init(void) ducati_clkdm = clkdm_lookup("ducati_clkdm"); if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l3_2_clkdm) || (!ducati_clkdm)) - goto err2; + return -EINVAL; ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); @@ -188,9 +192,42 @@ int __init omap4_pm_init(void) ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n"); + return -EINVAL; + } + + return ret; +} + +/** + * omap4_pm_init - Init routine for OMAP4+ devices + * + * Initializes all powerdomain and clockdomain target states + * and all PRCM settings. + * Return: Returns the error code returned by called functions. + */ +int __init omap4_pm_init(void) +{ + int ret = 0; + + if (omap_rev() == OMAP4430_REV_ES1_0) { + WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); + return -ENODEV; + } + + pr_info("Power Management for TI OMAP4+ devices.\n"); + + ret = pwrdm_for_each(pwrdms_setup, NULL); + if (ret) { + pr_err("Failed to setup powerdomains.\n"); goto err2; } + if (cpu_is_omap44xx()) { + ret = omap4_init_static_deps(); + if (ret) + goto err2; + } + ret = omap4_mpuss_init(); if (ret) { pr_err("Failed to initialise OMAP4 MPUSS\n"); @@ -206,7 +243,8 @@ int __init omap4_pm_init(void) /* Overwrite the default cpu_do_idle() */ arm_pm_idle = omap_default_idle; - omap4_idle_init(); + if (cpu_is_omap44xx()) + omap4_idle_init(); err2: return ret; diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 9701ad5778b..e4d7bd6f94b 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -255,6 +255,7 @@ extern void omap243x_powerdomains_init(void); extern void omap3xxx_powerdomains_init(void); extern void am33xx_powerdomains_init(void); extern void omap44xx_powerdomains_init(void); +extern void omap54xx_powerdomains_init(void); extern struct pwrdm_ops omap2_pwrdm_operations; extern struct pwrdm_ops omap3_pwrdm_operations; diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index f0e14e9efe5..e2d4bd80452 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -336,6 +336,54 @@ static struct powerdomain dpll5_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain device_81xx_pwrdm = { + .name = "device_pwrdm", + .prcm_offs = TI81XX_PRM_DEVICE_MOD, + .voltdm = { .name = "core" }, +}; + +static struct powerdomain active_816x_pwrdm = { + .name = "active_pwrdm", + .prcm_offs = TI816X_PRM_ACTIVE_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "core" }, +}; + +static struct powerdomain default_816x_pwrdm = { + .name = "default_pwrdm", + .prcm_offs = TI81XX_PRM_DEFAULT_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "core" }, +}; + +static struct powerdomain ivahd0_816x_pwrdm = { + .name = "ivahd0_pwrdm", + .prcm_offs = TI816X_PRM_IVAHD0_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "mpu_iva" }, +}; + +static struct powerdomain ivahd1_816x_pwrdm = { + .name = "ivahd1_pwrdm", + .prcm_offs = TI816X_PRM_IVAHD1_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "mpu_iva" }, +}; + +static struct powerdomain ivahd2_816x_pwrdm = { + .name = "ivahd2_pwrdm", + .prcm_offs = TI816X_PRM_IVAHD2_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "mpu_iva" }, +}; + +static struct powerdomain sgx_816x_pwrdm = { + .name = "sgx_pwrdm", + .prcm_offs = TI816X_PRM_SGX_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "core" }, +}; + /* As powerdomains are added or removed above, this list must also be changed */ static struct powerdomain *powerdomains_omap3430_common[] __initdata = { &wkup_omap2_pwrdm, @@ -393,6 +441,17 @@ static struct powerdomain *powerdomains_am35x[] __initdata = { NULL }; +static struct powerdomain *powerdomains_ti81xx[] __initdata = { + &device_81xx_pwrdm, + &active_816x_pwrdm, + &default_816x_pwrdm, + &ivahd0_816x_pwrdm, + &ivahd1_816x_pwrdm, + &ivahd2_816x_pwrdm, + &sgx_816x_pwrdm, + NULL +}; + void __init omap3xxx_powerdomains_init(void) { unsigned int rev; @@ -406,6 +465,9 @@ void __init omap3xxx_powerdomains_init(void) if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { pwrdm_register_pwrdms(powerdomains_am35x); + } else if (rev == TI8168_REV_ES1_0 || rev == TI8168_REV_ES1_1 + || rev == TI8168_REV_ES2_0 || rev == TI8168_REV_ES2_1) { + pwrdm_register_pwrdms(powerdomains_ti81xx); } else { pwrdm_register_pwrdms(powerdomains_omap3430_common); diff --git a/arch/arm/mach-omap2/powerdomains54xx_data.c b/arch/arm/mach-omap2/powerdomains54xx_data.c new file mode 100644 index 00000000000..81f8a7cc26e --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains54xx_data.c @@ -0,0 +1,331 @@ +/* + * OMAP54XX Power domains framework + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Abhijit Pagare (abhijitpagare@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * Paul Walmsley (paul@pwsan.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include "powerdomain.h" + +#include "prcm-common.h" +#include "prcm44xx.h" +#include "prm-regbits-54xx.h" +#include "prm54xx.h" +#include "prcm_mpu54xx.h" + +/* core_54xx_pwrdm: CORE power domain */ +static struct powerdomain core_54xx_pwrdm = { + .name = "core_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = OMAP54XX_PRM_CORE_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 5, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* core_nret_bank */ + [1] = PWRSTS_OFF_RET, /* core_ocmram */ + [2] = PWRSTS_OFF_RET, /* core_other_bank */ + [3] = PWRSTS_OFF_RET, /* ipu_l2ram */ + [4] = PWRSTS_OFF_RET, /* ipu_unicache */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET, /* core_nret_bank */ + [1] = PWRSTS_OFF_RET, /* core_ocmram */ + [2] = PWRSTS_OFF_RET, /* core_other_bank */ + [3] = PWRSTS_OFF_RET, /* ipu_l2ram */ + [4] = PWRSTS_OFF_RET, /* ipu_unicache */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +/* abe_54xx_pwrdm: Audio back end power domain */ +static struct powerdomain abe_54xx_pwrdm = { + .name = "abe_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = OMAP54XX_PRM_ABE_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF, + .banks = 2, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* aessmem */ + [1] = PWRSTS_OFF_RET, /* periphmem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET, /* aessmem */ + [1] = PWRSTS_OFF_RET, /* periphmem */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +/* coreaon_54xx_pwrdm: Always ON logic that sits in VDD_CORE voltage domain */ +static struct powerdomain coreaon_54xx_pwrdm = { + .name = "coreaon_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = OMAP54XX_PRM_COREAON_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_ON, +}; + +/* dss_54xx_pwrdm: Display subsystem power domain */ +static struct powerdomain dss_54xx_pwrdm = { + .name = "dss_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = OMAP54XX_PRM_DSS_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* dss_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET, /* dss_mem */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +/* cpu0_54xx_pwrdm: MPU0 processor and Neon coprocessor power domain */ +static struct powerdomain cpu0_54xx_pwrdm = { + .name = "cpu0_pwrdm", + .voltdm = { .name = "mpu" }, + .prcm_offs = OMAP54XX_PRCM_MPU_PRM_C0_INST, + .prcm_partition = OMAP54XX_PRCM_MPU_PARTITION, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* cpu0_l1 */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* cpu0_l1 */ + }, +}; + +/* cpu1_54xx_pwrdm: MPU1 processor and Neon coprocessor power domain */ +static struct powerdomain cpu1_54xx_pwrdm = { + .name = "cpu1_pwrdm", + .voltdm = { .name = "mpu" }, + .prcm_offs = OMAP54XX_PRCM_MPU_PRM_C1_INST, + .prcm_partition = OMAP54XX_PRCM_MPU_PARTITION, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* cpu1_l1 */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* cpu1_l1 */ + }, +}; + +/* emu_54xx_pwrdm: Emulation power domain */ +static struct powerdomain emu_54xx_pwrdm = { + .name = "emu_pwrdm", + .voltdm = { .name = "wkup" }, + .prcm_offs = OMAP54XX_PRM_EMU_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* emu_bank */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET, /* emu_bank */ + }, +}; + +/* mpu_54xx_pwrdm: Modena processor and the Neon coprocessor power domain */ +static struct powerdomain mpu_54xx_pwrdm = { + .name = "mpu_pwrdm", + .voltdm = { .name = "mpu" }, + .prcm_offs = OMAP54XX_PRM_MPU_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 2, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* mpu_l2 */ + [1] = PWRSTS_RET, /* mpu_ram */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET, /* mpu_l2 */ + [1] = PWRSTS_OFF_RET, /* mpu_ram */ + }, +}; + +/* custefuse_54xx_pwrdm: Customer efuse controller power domain */ +static struct powerdomain custefuse_54xx_pwrdm = { + .name = "custefuse_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = OMAP54XX_PRM_CUSTEFUSE_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_ON, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +/* dsp_54xx_pwrdm: Tesla processor power domain */ +static struct powerdomain dsp_54xx_pwrdm = { + .name = "dsp_pwrdm", + .voltdm = { .name = "mm" }, + .prcm_offs = OMAP54XX_PRM_DSP_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 3, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* dsp_edma */ + [1] = PWRSTS_OFF_RET, /* dsp_l1 */ + [2] = PWRSTS_OFF_RET, /* dsp_l2 */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET, /* dsp_edma */ + [1] = PWRSTS_OFF_RET, /* dsp_l1 */ + [2] = PWRSTS_OFF_RET, /* dsp_l2 */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +/* cam_54xx_pwrdm: Camera subsystem power domain */ +static struct powerdomain cam_54xx_pwrdm = { + .name = "cam_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = OMAP54XX_PRM_CAM_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* cam_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET, /* cam_mem */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +/* l3init_54xx_pwrdm: L3 initators pheripherals power domain */ +static struct powerdomain l3init_54xx_pwrdm = { + .name = "l3init_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = OMAP54XX_PRM_L3INIT_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 2, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* l3init_bank1 */ + [1] = PWRSTS_OFF_RET, /* l3init_bank2 */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET, /* l3init_bank1 */ + [1] = PWRSTS_OFF_RET, /* l3init_bank2 */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +/* gpu_54xx_pwrdm: 3D accelerator power domain */ +static struct powerdomain gpu_54xx_pwrdm = { + .name = "gpu_pwrdm", + .voltdm = { .name = "mm" }, + .prcm_offs = OMAP54XX_PRM_GPU_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* gpu_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET, /* gpu_mem */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +/* wkupaon_54xx_pwrdm: Wake-up power domain */ +static struct powerdomain wkupaon_54xx_pwrdm = { + .name = "wkupaon_pwrdm", + .voltdm = { .name = "wkup" }, + .prcm_offs = OMAP54XX_PRM_WKUPAON_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* wkup_bank */ + }, +}; + +/* iva_54xx_pwrdm: IVA-HD power domain */ +static struct powerdomain iva_54xx_pwrdm = { + .name = "iva_pwrdm", + .voltdm = { .name = "mm" }, + .prcm_offs = OMAP54XX_PRM_IVA_INST, + .prcm_partition = OMAP54XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF, + .banks = 4, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* hwa_mem */ + [1] = PWRSTS_OFF_RET, /* sl2_mem */ + [2] = PWRSTS_OFF_RET, /* tcm1_mem */ + [3] = PWRSTS_OFF_RET, /* tcm2_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET, /* hwa_mem */ + [1] = PWRSTS_OFF_RET, /* sl2_mem */ + [2] = PWRSTS_OFF_RET, /* tcm1_mem */ + [3] = PWRSTS_OFF_RET, /* tcm2_mem */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +/* + * The following power domains are not under SW control + * + * mpuaon + * mmaon + */ + +/* As powerdomains are added or removed above, this list must also be changed */ +static struct powerdomain *powerdomains_omap54xx[] __initdata = { + &core_54xx_pwrdm, + &abe_54xx_pwrdm, + &coreaon_54xx_pwrdm, + &dss_54xx_pwrdm, + &cpu0_54xx_pwrdm, + &cpu1_54xx_pwrdm, + &emu_54xx_pwrdm, + &mpu_54xx_pwrdm, + &custefuse_54xx_pwrdm, + &dsp_54xx_pwrdm, + &cam_54xx_pwrdm, + &l3init_54xx_pwrdm, + &gpu_54xx_pwrdm, + &wkupaon_54xx_pwrdm, + &iva_54xx_pwrdm, + NULL +}; + +void __init omap54xx_powerdomains_init(void) +{ + pwrdm_register_platform_funcs(&omap4_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_omap54xx); + pwrdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index c7d355fafd2..ff1ac4a82a0 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -48,6 +48,17 @@ #define OMAP3430_NEON_MOD 0xb00 #define OMAP3430ES2_USBHOST_MOD 0xc00 +/* + * TI81XX PRM module offsets + */ +#define TI81XX_PRM_DEVICE_MOD 0x0000 +#define TI816X_PRM_ACTIVE_MOD 0x0a00 +#define TI81XX_PRM_DEFAULT_MOD 0x0b00 +#define TI816X_PRM_IVAHD0_MOD 0x0c00 +#define TI816X_PRM_IVAHD1_MOD 0x0d00 +#define TI816X_PRM_IVAHD2_MOD 0x0e00 +#define TI816X_PRM_SGX_MOD 0x0f00 + /* 24XX register bits shared between CM & PRM registers */ /* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */ diff --git a/arch/arm/mach-omap2/prcm44xx.h b/arch/arm/mach-omap2/prcm44xx.h index 7334ffb9d2c..f429cdd5a11 100644 --- a/arch/arm/mach-omap2/prcm44xx.h +++ b/arch/arm/mach-omap2/prcm44xx.h @@ -32,6 +32,12 @@ #define OMAP4430_SCRM_PARTITION 4 #define OMAP4430_PRCM_MPU_PARTITION 5 +#define OMAP54XX_PRM_PARTITION 1 +#define OMAP54XX_CM_CORE_AON_PARTITION 2 +#define OMAP54XX_CM_CORE_PARTITION 3 +#define OMAP54XX_SCRM_PARTITION 4 +#define OMAP54XX_PRCM_MPU_PARTITION 5 + /* * OMAP4_MAX_PRCM_PARTITIONS: set to the highest value of the PRCM partition * IDs, plus one diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 884af7bb4af..059bd4f4903 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -25,12 +25,9 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H #define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H +#include "prcm_mpu_44xx_54xx.h" #include "common.h" -# ifndef __ASSEMBLER__ -extern void __iomem *prcm_mpu_base; -# endif - #define OMAP4430_PRCM_MPU_BASE 0x48243000 #define OMAP44XX_PRCM_MPU_REGADDR(inst, reg) \ @@ -98,13 +95,4 @@ extern void __iomem *prcm_mpu_base; #define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET 0x0018 #define OMAP4430_CM_CPU1_CLKSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0018) -/* Function prototypes */ -# ifndef __ASSEMBLER__ -extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx); -extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx); -extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, - s16 idx); -extern void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu); -# endif - #endif diff --git a/arch/arm/mach-omap2/prcm_mpu54xx.h b/arch/arm/mach-omap2/prcm_mpu54xx.h new file mode 100644 index 00000000000..bc2ce328831 --- /dev/null +++ b/arch/arm/mach-omap2/prcm_mpu54xx.h @@ -0,0 +1,87 @@ +/* + * OMAP54xx PRCM MPU instance offset macros + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU54XX_H +#define __ARCH_ARM_MACH_OMAP2_PRCM_MPU54XX_H + +#include "prcm_mpu_44xx_54xx.h" +#include "common.h" + +#define OMAP54XX_PRCM_MPU_BASE 0x48243000 + +#define OMAP54XX_PRCM_MPU_REGADDR(inst, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE + (inst) + (reg)) + +/* PRCM_MPU instances */ +#define OMAP54XX_PRCM_MPU_OCP_SOCKET_INST 0x0000 +#define OMAP54XX_PRCM_MPU_DEVICE_INST 0x0200 +#define OMAP54XX_PRCM_MPU_PRM_C0_INST 0x0400 +#define OMAP54XX_PRCM_MPU_CM_C0_INST 0x0600 +#define OMAP54XX_PRCM_MPU_PRM_C1_INST 0x0800 +#define OMAP54XX_PRCM_MPU_CM_C1_INST 0x0a00 + +/* PRCM_MPU clockdomain register offsets (from instance start) */ +#define OMAP54XX_PRCM_MPU_CM_C0_CPU0_CDOFFS 0x0000 +#define OMAP54XX_PRCM_MPU_CM_C1_CPU1_CDOFFS 0x0000 + + +/* + * PRCM_MPU + * + * The PRCM_MPU is a local PRCM inside the MPU subsystem. For the PRCM (global) + * point of view the PRCM_MPU is a single entity. It shares the same + * programming model as the global PRCM and thus can be assimilate as two new + * MOD inside the PRCM + */ + +/* PRCM_MPU.PRCM_MPU_OCP_SOCKET register offsets */ +#define OMAP54XX_REVISION_PRCM_MPU_OFFSET 0x0000 + +/* PRCM_MPU.PRCM_MPU_DEVICE register offsets */ +#define OMAP54XX_PRCM_MPU_PRM_RSTST_OFFSET 0x0000 +#define OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET 0x0004 +#define OMAP54XX_PRM_FRAC_INCREMENTER_NUMERATOR_OFFSET 0x0010 +#define OMAP54XX_PRM_FRAC_INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x0014 + +/* PRCM_MPU.PRCM_MPU_PRM_C0 register offsets */ +#define OMAP54XX_PM_CPU0_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_CPU0_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_CPU0_CPU0_RSTCTRL_OFFSET 0x0010 +#define OMAP54XX_RM_CPU0_CPU0_RSTST_OFFSET 0x0014 +#define OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET 0x0024 + +/* PRCM_MPU.PRCM_MPU_CM_C0 register offsets */ +#define OMAP54XX_CM_CPU0_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_CPU0_CPU0_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_CPU0_CPU0_CLKCTRL OMAP54XX_PRCM_MPU_REGADDR(OMAP54XX_PRCM_MPU_CM_C0_INST, 0x0020) + +/* PRCM_MPU.PRCM_MPU_PRM_C1 register offsets */ +#define OMAP54XX_PM_CPU1_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_CPU1_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_CPU1_CPU1_RSTCTRL_OFFSET 0x0010 +#define OMAP54XX_RM_CPU1_CPU1_RSTST_OFFSET 0x0014 +#define OMAP54XX_RM_CPU1_CPU1_CONTEXT_OFFSET 0x0024 + +/* PRCM_MPU.PRCM_MPU_CM_C1 register offsets */ +#define OMAP54XX_CM_CPU1_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_CPU1_CPU1_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_CPU1_CPU1_CLKCTRL OMAP54XX_PRCM_MPU_REGADDR(OMAP54XX_PRCM_MPU_CM_C1_INST, 0x0020) + +#endif diff --git a/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h b/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h new file mode 100644 index 00000000000..ca149e70bed --- /dev/null +++ b/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h @@ -0,0 +1,36 @@ +/* + * OMAP44xx and OMAP54xx PRCM MPU function prototypes + * + * Copyright (C) 2010, 2013 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU_44XX_54XX_H +#define __ARCH_ARM_MACH_OMAP2_PRCM_MPU_44XX_54XX_H + +#ifndef __ASSEMBLER__ +extern void __iomem *prcm_mpu_base; + +extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx); +extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx); +extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, + s16 idx); +extern void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu); +#endif + +#endif diff --git a/arch/arm/mach-omap2/prm-regbits-54xx.h b/arch/arm/mach-omap2/prm-regbits-54xx.h new file mode 100644 index 00000000000..be31b21aa9c --- /dev/null +++ b/arch/arm/mach-omap2/prm-regbits-54xx.h @@ -0,0 +1,2701 @@ +/* + * OMAP54xx Power Management register bits + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_54XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_54XX_H + +/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */ +#define OMAP54XX_ABBOFF_ACT_SHIFT 1 +#define OMAP54XX_ABBOFF_ACT_WIDTH 0x1 +#define OMAP54XX_ABBOFF_ACT_MASK (1 << 1) + +/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */ +#define OMAP54XX_ABBOFF_SLEEP_SHIFT 2 +#define OMAP54XX_ABBOFF_SLEEP_WIDTH 0x1 +#define OMAP54XX_ABBOFF_SLEEP_MASK (1 << 2) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_ABB_MM_DONE_EN_SHIFT 31 +#define OMAP54XX_ABB_MM_DONE_EN_WIDTH 0x1 +#define OMAP54XX_ABB_MM_DONE_EN_MASK (1 << 31) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_ABB_MM_DONE_ST_SHIFT 31 +#define OMAP54XX_ABB_MM_DONE_ST_WIDTH 0x1 +#define OMAP54XX_ABB_MM_DONE_ST_MASK (1 << 31) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP54XX_ABB_MPU_DONE_EN_SHIFT 7 +#define OMAP54XX_ABB_MPU_DONE_EN_WIDTH 0x1 +#define OMAP54XX_ABB_MPU_DONE_EN_MASK (1 << 7) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP54XX_ABB_MPU_DONE_ST_SHIFT 7 +#define OMAP54XX_ABB_MPU_DONE_ST_WIDTH 0x1 +#define OMAP54XX_ABB_MPU_DONE_ST_MASK (1 << 7) + +/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */ +#define OMAP54XX_ACTIVE_FBB_SEL_SHIFT 2 +#define OMAP54XX_ACTIVE_FBB_SEL_WIDTH 0x1 +#define OMAP54XX_ACTIVE_FBB_SEL_MASK (1 << 2) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP54XX_AESSMEM_ONSTATE_SHIFT 16 +#define OMAP54XX_AESSMEM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_AESSMEM_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP54XX_AESSMEM_RETSTATE_SHIFT 8 +#define OMAP54XX_AESSMEM_RETSTATE_WIDTH 0x1 +#define OMAP54XX_AESSMEM_RETSTATE_MASK (1 << 8) + +/* Used by PM_ABE_PWRSTST */ +#define OMAP54XX_AESSMEM_STATEST_SHIFT 4 +#define OMAP54XX_AESSMEM_STATEST_WIDTH 0x2 +#define OMAP54XX_AESSMEM_STATEST_MASK (0x3 << 4) + +/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */ +#define OMAP54XX_AIPOFF_SHIFT 8 +#define OMAP54XX_AIPOFF_WIDTH 0x1 +#define OMAP54XX_AIPOFF_MASK (1 << 8) + +/* Used by PRM_VOLTCTRL */ +#define OMAP54XX_AUTO_CTRL_VDD_CORE_L_SHIFT 0 +#define OMAP54XX_AUTO_CTRL_VDD_CORE_L_WIDTH 0x2 +#define OMAP54XX_AUTO_CTRL_VDD_CORE_L_MASK (0x3 << 0) + +/* Used by PRM_VOLTCTRL */ +#define OMAP54XX_AUTO_CTRL_VDD_MM_L_SHIFT 4 +#define OMAP54XX_AUTO_CTRL_VDD_MM_L_WIDTH 0x2 +#define OMAP54XX_AUTO_CTRL_VDD_MM_L_MASK (0x3 << 4) + +/* Used by PRM_VOLTCTRL */ +#define OMAP54XX_AUTO_CTRL_VDD_MPU_L_SHIFT 2 +#define OMAP54XX_AUTO_CTRL_VDD_MPU_L_WIDTH 0x2 +#define OMAP54XX_AUTO_CTRL_VDD_MPU_L_MASK (0x3 << 2) + +/* Used by PRM_VC_BYPASS_ERRST */ +#define OMAP54XX_BYPS_RA_ERR_SHIFT 1 +#define OMAP54XX_BYPS_RA_ERR_WIDTH 0x1 +#define OMAP54XX_BYPS_RA_ERR_MASK (1 << 1) + +/* Used by PRM_VC_BYPASS_ERRST */ +#define OMAP54XX_BYPS_SA_ERR_SHIFT 0 +#define OMAP54XX_BYPS_SA_ERR_WIDTH 0x1 +#define OMAP54XX_BYPS_SA_ERR_MASK (1 << 0) + +/* Used by PRM_VC_BYPASS_ERRST */ +#define OMAP54XX_BYPS_TIMEOUT_ERR_SHIFT 2 +#define OMAP54XX_BYPS_TIMEOUT_ERR_WIDTH 0x1 +#define OMAP54XX_BYPS_TIMEOUT_ERR_MASK (1 << 2) + +/* Used by PRM_RSTST */ +#define OMAP54XX_C2C_RST_SHIFT 10 +#define OMAP54XX_C2C_RST_WIDTH 0x1 +#define OMAP54XX_C2C_RST_MASK (1 << 10) + +/* Used by PM_CAM_PWRSTCTRL */ +#define OMAP54XX_CAM_MEM_ONSTATE_SHIFT 16 +#define OMAP54XX_CAM_MEM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_CAM_MEM_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_CAM_PWRSTST */ +#define OMAP54XX_CAM_MEM_STATEST_SHIFT 4 +#define OMAP54XX_CAM_MEM_STATEST_WIDTH 0x2 +#define OMAP54XX_CAM_MEM_STATEST_MASK (0x3 << 4) + +/* Used by PRM_CLKREQCTRL */ +#define OMAP54XX_CLKREQ_COND_SHIFT 0 +#define OMAP54XX_CLKREQ_COND_WIDTH 0x3 +#define OMAP54XX_CLKREQ_COND_MASK (0x7 << 0) + +/* Used by PRM_VC_SMPS_CORE_CONFIG */ +#define OMAP54XX_CMDRA_VDD_CORE_L_SHIFT 16 +#define OMAP54XX_CMDRA_VDD_CORE_L_WIDTH 0x8 +#define OMAP54XX_CMDRA_VDD_CORE_L_MASK (0xff << 16) + +/* Used by PRM_VC_SMPS_MM_CONFIG */ +#define OMAP54XX_CMDRA_VDD_MM_L_SHIFT 16 +#define OMAP54XX_CMDRA_VDD_MM_L_WIDTH 0x8 +#define OMAP54XX_CMDRA_VDD_MM_L_MASK (0xff << 16) + +/* Used by PRM_VC_SMPS_MPU_CONFIG */ +#define OMAP54XX_CMDRA_VDD_MPU_L_SHIFT 16 +#define OMAP54XX_CMDRA_VDD_MPU_L_WIDTH 0x8 +#define OMAP54XX_CMDRA_VDD_MPU_L_MASK (0xff << 16) + +/* Used by PRM_VC_SMPS_CORE_CONFIG */ +#define OMAP54XX_CMD_VDD_CORE_L_SHIFT 28 +#define OMAP54XX_CMD_VDD_CORE_L_WIDTH 0x1 +#define OMAP54XX_CMD_VDD_CORE_L_MASK (1 << 28) + +/* Used by PRM_VC_SMPS_MM_CONFIG */ +#define OMAP54XX_CMD_VDD_MM_L_SHIFT 28 +#define OMAP54XX_CMD_VDD_MM_L_WIDTH 0x1 +#define OMAP54XX_CMD_VDD_MM_L_MASK (1 << 28) + +/* Used by PRM_VC_SMPS_MPU_CONFIG */ +#define OMAP54XX_CMD_VDD_MPU_L_SHIFT 28 +#define OMAP54XX_CMD_VDD_MPU_L_WIDTH 0x1 +#define OMAP54XX_CMD_VDD_MPU_L_MASK (1 << 28) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP54XX_CORE_OCMRAM_ONSTATE_SHIFT 18 +#define OMAP54XX_CORE_OCMRAM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_CORE_OCMRAM_ONSTATE_MASK (0x3 << 18) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP54XX_CORE_OCMRAM_RETSTATE_SHIFT 9 +#define OMAP54XX_CORE_OCMRAM_RETSTATE_WIDTH 0x1 +#define OMAP54XX_CORE_OCMRAM_RETSTATE_MASK (1 << 9) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP54XX_CORE_OCMRAM_STATEST_SHIFT 6 +#define OMAP54XX_CORE_OCMRAM_STATEST_WIDTH 0x2 +#define OMAP54XX_CORE_OCMRAM_STATEST_MASK (0x3 << 6) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP54XX_CORE_OTHER_BANK_ONSTATE_SHIFT 16 +#define OMAP54XX_CORE_OTHER_BANK_ONSTATE_WIDTH 0x2 +#define OMAP54XX_CORE_OTHER_BANK_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP54XX_CORE_OTHER_BANK_RETSTATE_SHIFT 8 +#define OMAP54XX_CORE_OTHER_BANK_RETSTATE_WIDTH 0x1 +#define OMAP54XX_CORE_OTHER_BANK_RETSTATE_MASK (1 << 8) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP54XX_CORE_OTHER_BANK_STATEST_SHIFT 4 +#define OMAP54XX_CORE_OTHER_BANK_STATEST_WIDTH 0x2 +#define OMAP54XX_CORE_OTHER_BANK_STATEST_MASK (0x3 << 4) + +/* Used by REVISION_PRM */ +#define OMAP54XX_CUSTOM_SHIFT 6 +#define OMAP54XX_CUSTOM_WIDTH 0x2 +#define OMAP54XX_CUSTOM_MASK (0x3 << 6) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP54XX_DATA_SHIFT 16 +#define OMAP54XX_DATA_WIDTH 0x8 +#define OMAP54XX_DATA_MASK (0xff << 16) + +/* Used by PRM_DEBUG_CORE_RET_TRANS */ +#define OMAP54XX_PRM_DEBUG_OUT_SHIFT 0 +#define OMAP54XX_PRM_DEBUG_OUT_WIDTH 0x1c +#define OMAP54XX_PRM_DEBUG_OUT_MASK (0xfffffff << 0) + +/* Renamed from DEBUG_OUT Used by PRM_DEBUG_MM_RET_TRANS */ +#define OMAP54XX_DEBUG_OUT_0_9_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_9_WIDTH 0xa +#define OMAP54XX_DEBUG_OUT_0_9_MASK (0x3ff << 0) + +/* Renamed from DEBUG_OUT Used by PRM_DEBUG_MPU_RET_TRANS */ +#define OMAP54XX_DEBUG_OUT_0_6_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_6_WIDTH 0x7 +#define OMAP54XX_DEBUG_OUT_0_6_MASK (0x7f << 0) + +/* Renamed from DEBUG_OUT Used by PRM_DEBUG_OFF_TRANS */ +#define OMAP54XX_DEBUG_OUT_0_31_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_31_WIDTH 0x20 +#define OMAP54XX_DEBUG_OUT_0_31_MASK (0xffffffff << 0) + +/* Renamed from DEBUG_OUT Used by PRM_DEBUG_WKUPAON_FD_TRANS */ +#define OMAP54XX_DEBUG_OUT_0_11_SHIFT 0 +#define OMAP54XX_DEBUG_OUT_0_11_WIDTH 0xc +#define OMAP54XX_DEBUG_OUT_0_11_MASK (0xfff << 0) + +/* Used by PRM_DEVICE_OFF_CTRL */ +#define OMAP54XX_DEVICE_OFF_ENABLE_SHIFT 0 +#define OMAP54XX_DEVICE_OFF_ENABLE_WIDTH 0x1 +#define OMAP54XX_DEVICE_OFF_ENABLE_MASK (1 << 0) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP54XX_DFILTEREN_SHIFT 6 +#define OMAP54XX_DFILTEREN_WIDTH 0x1 +#define OMAP54XX_DFILTEREN_MASK (1 << 6) + +/* Used by PRM_IRQENABLE_DSP, PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_DPLL_ABE_RECAL_EN_SHIFT 4 +#define OMAP54XX_DPLL_ABE_RECAL_EN_WIDTH 0x1 +#define OMAP54XX_DPLL_ABE_RECAL_EN_MASK (1 << 4) + +/* Used by PRM_IRQSTATUS_DSP, PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_DPLL_ABE_RECAL_ST_SHIFT 4 +#define OMAP54XX_DPLL_ABE_RECAL_ST_WIDTH 0x1 +#define OMAP54XX_DPLL_ABE_RECAL_ST_MASK (1 << 4) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_DPLL_CORE_RECAL_EN_SHIFT 0 +#define OMAP54XX_DPLL_CORE_RECAL_EN_WIDTH 0x1 +#define OMAP54XX_DPLL_CORE_RECAL_EN_MASK (1 << 0) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_DPLL_CORE_RECAL_ST_SHIFT 0 +#define OMAP54XX_DPLL_CORE_RECAL_ST_WIDTH 0x1 +#define OMAP54XX_DPLL_CORE_RECAL_ST_MASK (1 << 0) + +/* Used by PRM_IRQENABLE_DSP, PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_DPLL_IVA_RECAL_EN_SHIFT 2 +#define OMAP54XX_DPLL_IVA_RECAL_EN_WIDTH 0x1 +#define OMAP54XX_DPLL_IVA_RECAL_EN_MASK (1 << 2) + +/* Used by PRM_IRQSTATUS_DSP, PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_DPLL_IVA_RECAL_ST_SHIFT 2 +#define OMAP54XX_DPLL_IVA_RECAL_ST_WIDTH 0x1 +#define OMAP54XX_DPLL_IVA_RECAL_ST_MASK (1 << 2) + +/* Used by PRM_IRQENABLE_MPU */ +#define OMAP54XX_DPLL_MPU_RECAL_EN_SHIFT 1 +#define OMAP54XX_DPLL_MPU_RECAL_EN_WIDTH 0x1 +#define OMAP54XX_DPLL_MPU_RECAL_EN_MASK (1 << 1) + +/* Used by PRM_IRQSTATUS_MPU */ +#define OMAP54XX_DPLL_MPU_RECAL_ST_SHIFT 1 +#define OMAP54XX_DPLL_MPU_RECAL_ST_WIDTH 0x1 +#define OMAP54XX_DPLL_MPU_RECAL_ST_MASK (1 << 1) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_DPLL_PER_RECAL_EN_SHIFT 3 +#define OMAP54XX_DPLL_PER_RECAL_EN_WIDTH 0x1 +#define OMAP54XX_DPLL_PER_RECAL_EN_MASK (1 << 3) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_DPLL_PER_RECAL_ST_SHIFT 3 +#define OMAP54XX_DPLL_PER_RECAL_ST_WIDTH 0x1 +#define OMAP54XX_DPLL_PER_RECAL_ST_MASK (1 << 3) + +/* Used by PM_DSP_PWRSTCTRL */ +#define OMAP54XX_DSP_EDMA_ONSTATE_SHIFT 20 +#define OMAP54XX_DSP_EDMA_ONSTATE_WIDTH 0x2 +#define OMAP54XX_DSP_EDMA_ONSTATE_MASK (0x3 << 20) + +/* Used by PM_DSP_PWRSTCTRL */ +#define OMAP54XX_DSP_EDMA_RETSTATE_SHIFT 10 +#define OMAP54XX_DSP_EDMA_RETSTATE_WIDTH 0x1 +#define OMAP54XX_DSP_EDMA_RETSTATE_MASK (1 << 10) + +/* Used by PM_DSP_PWRSTST */ +#define OMAP54XX_DSP_EDMA_STATEST_SHIFT 8 +#define OMAP54XX_DSP_EDMA_STATEST_WIDTH 0x2 +#define OMAP54XX_DSP_EDMA_STATEST_MASK (0x3 << 8) + +/* Used by PM_DSP_PWRSTCTRL */ +#define OMAP54XX_DSP_L1_ONSTATE_SHIFT 16 +#define OMAP54XX_DSP_L1_ONSTATE_WIDTH 0x2 +#define OMAP54XX_DSP_L1_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_DSP_PWRSTCTRL */ +#define OMAP54XX_DSP_L1_RETSTATE_SHIFT 8 +#define OMAP54XX_DSP_L1_RETSTATE_WIDTH 0x1 +#define OMAP54XX_DSP_L1_RETSTATE_MASK (1 << 8) + +/* Used by PM_DSP_PWRSTST */ +#define OMAP54XX_DSP_L1_STATEST_SHIFT 4 +#define OMAP54XX_DSP_L1_STATEST_WIDTH 0x2 +#define OMAP54XX_DSP_L1_STATEST_MASK (0x3 << 4) + +/* Used by PM_DSP_PWRSTCTRL */ +#define OMAP54XX_DSP_L2_ONSTATE_SHIFT 18 +#define OMAP54XX_DSP_L2_ONSTATE_WIDTH 0x2 +#define OMAP54XX_DSP_L2_ONSTATE_MASK (0x3 << 18) + +/* Used by PM_DSP_PWRSTCTRL */ +#define OMAP54XX_DSP_L2_RETSTATE_SHIFT 9 +#define OMAP54XX_DSP_L2_RETSTATE_WIDTH 0x1 +#define OMAP54XX_DSP_L2_RETSTATE_MASK (1 << 9) + +/* Used by PM_DSP_PWRSTST */ +#define OMAP54XX_DSP_L2_STATEST_SHIFT 6 +#define OMAP54XX_DSP_L2_STATEST_WIDTH 0x2 +#define OMAP54XX_DSP_L2_STATEST_MASK (0x3 << 6) + +/* Used by PM_DSS_PWRSTCTRL */ +#define OMAP54XX_DSS_MEM_ONSTATE_SHIFT 16 +#define OMAP54XX_DSS_MEM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_DSS_MEM_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_DSS_PWRSTCTRL */ +#define OMAP54XX_DSS_MEM_RETSTATE_SHIFT 8 +#define OMAP54XX_DSS_MEM_RETSTATE_WIDTH 0x1 +#define OMAP54XX_DSS_MEM_RETSTATE_MASK (1 << 8) + +/* Used by PM_DSS_PWRSTST */ +#define OMAP54XX_DSS_MEM_STATEST_SHIFT 4 +#define OMAP54XX_DSS_MEM_STATEST_WIDTH 0x2 +#define OMAP54XX_DSS_MEM_STATEST_MASK (0x3 << 4) + +/* Used by PRM_DEVICE_OFF_CTRL */ +#define OMAP54XX_EMIF1_OFFWKUP_DISABLE_SHIFT 8 +#define OMAP54XX_EMIF1_OFFWKUP_DISABLE_WIDTH 0x1 +#define OMAP54XX_EMIF1_OFFWKUP_DISABLE_MASK (1 << 8) + +/* Used by PRM_DEVICE_OFF_CTRL */ +#define OMAP54XX_EMIF2_OFFWKUP_DISABLE_SHIFT 9 +#define OMAP54XX_EMIF2_OFFWKUP_DISABLE_WIDTH 0x1 +#define OMAP54XX_EMIF2_OFFWKUP_DISABLE_MASK (1 << 9) + +/* Used by PM_EMU_PWRSTCTRL */ +#define OMAP54XX_EMU_BANK_ONSTATE_SHIFT 16 +#define OMAP54XX_EMU_BANK_ONSTATE_WIDTH 0x2 +#define OMAP54XX_EMU_BANK_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_EMU_PWRSTST */ +#define OMAP54XX_EMU_BANK_STATEST_SHIFT 4 +#define OMAP54XX_EMU_BANK_STATEST_WIDTH 0x2 +#define OMAP54XX_EMU_BANK_STATEST_MASK (0x3 << 4) + +/* + * Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP, + * PRM_SRAM_WKUP_SETUP + */ +#define OMAP54XX_ENABLE_RTA_SHIFT 0 +#define OMAP54XX_ENABLE_RTA_WIDTH 0x1 +#define OMAP54XX_ENABLE_RTA_MASK (1 << 0) + +/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */ +#define OMAP54XX_ENFUNC1_SHIFT 3 +#define OMAP54XX_ENFUNC1_WIDTH 0x1 +#define OMAP54XX_ENFUNC1_MASK (1 << 3) + +/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */ +#define OMAP54XX_ENFUNC2_SHIFT 4 +#define OMAP54XX_ENFUNC2_WIDTH 0x1 +#define OMAP54XX_ENFUNC2_MASK (1 << 4) + +/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */ +#define OMAP54XX_ENFUNC3_SHIFT 5 +#define OMAP54XX_ENFUNC3_WIDTH 0x1 +#define OMAP54XX_ENFUNC3_MASK (1 << 5) + +/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */ +#define OMAP54XX_ENFUNC4_SHIFT 6 +#define OMAP54XX_ENFUNC4_WIDTH 0x1 +#define OMAP54XX_ENFUNC4_MASK (1 << 6) + +/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */ +#define OMAP54XX_ENFUNC5_SHIFT 7 +#define OMAP54XX_ENFUNC5_WIDTH 0x1 +#define OMAP54XX_ENFUNC5_MASK (1 << 7) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP54XX_ERRORGAIN_SHIFT 16 +#define OMAP54XX_ERRORGAIN_WIDTH 0x8 +#define OMAP54XX_ERRORGAIN_MASK (0xff << 16) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP54XX_ERROROFFSET_SHIFT 24 +#define OMAP54XX_ERROROFFSET_WIDTH 0x8 +#define OMAP54XX_ERROROFFSET_MASK (0xff << 24) + +/* Used by PRM_RSTST */ +#define OMAP54XX_EXTERNAL_WARM_RST_SHIFT 5 +#define OMAP54XX_EXTERNAL_WARM_RST_WIDTH 0x1 +#define OMAP54XX_EXTERNAL_WARM_RST_MASK (1 << 5) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP54XX_FORCEUPDATE_SHIFT 1 +#define OMAP54XX_FORCEUPDATE_WIDTH 0x1 +#define OMAP54XX_FORCEUPDATE_MASK (1 << 1) + +/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_MM_VOLTAGE, PRM_VP_MPU_VOLTAGE */ +#define OMAP54XX_FORCEUPDATEWAIT_SHIFT 8 +#define OMAP54XX_FORCEUPDATEWAIT_WIDTH 0x18 +#define OMAP54XX_FORCEUPDATEWAIT_MASK (0xffffff << 8) + +/* Used by PRM_IRQENABLE_DSP, PRM_IRQENABLE_IPU */ +#define OMAP54XX_FORCEWKUP_EN_SHIFT 10 +#define OMAP54XX_FORCEWKUP_EN_WIDTH 0x1 +#define OMAP54XX_FORCEWKUP_EN_MASK (1 << 10) + +/* Used by PRM_IRQSTATUS_DSP, PRM_IRQSTATUS_IPU */ +#define OMAP54XX_FORCEWKUP_ST_SHIFT 10 +#define OMAP54XX_FORCEWKUP_ST_WIDTH 0x1 +#define OMAP54XX_FORCEWKUP_ST_MASK (1 << 10) + +/* Used by REVISION_PRM */ +#define OMAP54XX_FUNC_SHIFT 16 +#define OMAP54XX_FUNC_WIDTH 0xc +#define OMAP54XX_FUNC_MASK (0xfff << 16) + +/* Used by PRM_RSTST */ +#define OMAP54XX_GLOBAL_COLD_RST_SHIFT 0 +#define OMAP54XX_GLOBAL_COLD_RST_WIDTH 0x1 +#define OMAP54XX_GLOBAL_COLD_RST_MASK (1 << 0) + +/* Used by PRM_RSTST */ +#define OMAP54XX_GLOBAL_WARM_SW_RST_SHIFT 1 +#define OMAP54XX_GLOBAL_WARM_SW_RST_WIDTH 0x1 +#define OMAP54XX_GLOBAL_WARM_SW_RST_MASK (1 << 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP54XX_GLOBAL_WUEN_SHIFT 16 +#define OMAP54XX_GLOBAL_WUEN_WIDTH 0x1 +#define OMAP54XX_GLOBAL_WUEN_MASK (1 << 16) + +/* Used by PM_GPU_PWRSTCTRL */ +#define OMAP54XX_GPU_MEM_ONSTATE_SHIFT 16 +#define OMAP54XX_GPU_MEM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_GPU_MEM_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_GPU_PWRSTST */ +#define OMAP54XX_GPU_MEM_STATEST_SHIFT 4 +#define OMAP54XX_GPU_MEM_STATEST_WIDTH 0x2 +#define OMAP54XX_GPU_MEM_STATEST_MASK (0x3 << 4) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP54XX_HSMCODE_SHIFT 0 +#define OMAP54XX_HSMCODE_WIDTH 0x3 +#define OMAP54XX_HSMCODE_MASK (0x7 << 0) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP54XX_HSMODEEN_SHIFT 3 +#define OMAP54XX_HSMODEEN_WIDTH 0x1 +#define OMAP54XX_HSMODEEN_MASK (1 << 3) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP54XX_HSSCLH_SHIFT 16 +#define OMAP54XX_HSSCLH_WIDTH 0x8 +#define OMAP54XX_HSSCLH_MASK (0xff << 16) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP54XX_HSSCLL_SHIFT 24 +#define OMAP54XX_HSSCLL_WIDTH 0x8 +#define OMAP54XX_HSSCLL_MASK (0xff << 24) + +/* Used by PM_IVA_PWRSTCTRL */ +#define OMAP54XX_HWA_MEM_ONSTATE_SHIFT 16 +#define OMAP54XX_HWA_MEM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_HWA_MEM_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_IVA_PWRSTCTRL */ +#define OMAP54XX_HWA_MEM_RETSTATE_SHIFT 8 +#define OMAP54XX_HWA_MEM_RETSTATE_WIDTH 0x1 +#define OMAP54XX_HWA_MEM_RETSTATE_MASK (1 << 8) + +/* Used by PM_IVA_PWRSTST */ +#define OMAP54XX_HWA_MEM_STATEST_SHIFT 4 +#define OMAP54XX_HWA_MEM_STATEST_WIDTH 0x2 +#define OMAP54XX_HWA_MEM_STATEST_MASK (0x3 << 4) + +/* Used by PRM_RSTST */ +#define OMAP54XX_ICEPICK_RST_SHIFT 9 +#define OMAP54XX_ICEPICK_RST_WIDTH 0x1 +#define OMAP54XX_ICEPICK_RST_MASK (1 << 9) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP54XX_INITVDD_SHIFT 2 +#define OMAP54XX_INITVDD_WIDTH 0x1 +#define OMAP54XX_INITVDD_MASK (1 << 2) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP54XX_INITVOLTAGE_SHIFT 8 +#define OMAP54XX_INITVOLTAGE_WIDTH 0x8 +#define OMAP54XX_INITVOLTAGE_MASK (0xff << 8) + +/* + * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST, + * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST, + * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST, + * PRM_VOLTST_MM, PRM_VOLTST_MPU + */ +#define OMAP54XX_INTRANSITION_SHIFT 20 +#define OMAP54XX_INTRANSITION_WIDTH 0x1 +#define OMAP54XX_INTRANSITION_MASK (1 << 20) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_IO_EN_SHIFT 9 +#define OMAP54XX_IO_EN_WIDTH 0x1 +#define OMAP54XX_IO_EN_MASK (1 << 9) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP54XX_IO_ON_STATUS_SHIFT 5 +#define OMAP54XX_IO_ON_STATUS_WIDTH 0x1 +#define OMAP54XX_IO_ON_STATUS_MASK (1 << 5) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_IO_ST_SHIFT 9 +#define OMAP54XX_IO_ST_WIDTH 0x1 +#define OMAP54XX_IO_ST_MASK (1 << 9) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP54XX_IPU_L2RAM_ONSTATE_SHIFT 20 +#define OMAP54XX_IPU_L2RAM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_IPU_L2RAM_ONSTATE_MASK (0x3 << 20) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP54XX_IPU_L2RAM_RETSTATE_SHIFT 10 +#define OMAP54XX_IPU_L2RAM_RETSTATE_WIDTH 0x1 +#define OMAP54XX_IPU_L2RAM_RETSTATE_MASK (1 << 10) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP54XX_IPU_L2RAM_STATEST_SHIFT 8 +#define OMAP54XX_IPU_L2RAM_STATEST_WIDTH 0x2 +#define OMAP54XX_IPU_L2RAM_STATEST_MASK (0x3 << 8) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP54XX_IPU_UNICACHE_ONSTATE_SHIFT 22 +#define OMAP54XX_IPU_UNICACHE_ONSTATE_WIDTH 0x2 +#define OMAP54XX_IPU_UNICACHE_ONSTATE_MASK (0x3 << 22) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP54XX_IPU_UNICACHE_RETSTATE_SHIFT 11 +#define OMAP54XX_IPU_UNICACHE_RETSTATE_WIDTH 0x1 +#define OMAP54XX_IPU_UNICACHE_RETSTATE_MASK (1 << 11) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP54XX_IPU_UNICACHE_STATEST_SHIFT 10 +#define OMAP54XX_IPU_UNICACHE_STATEST_WIDTH 0x2 +#define OMAP54XX_IPU_UNICACHE_STATEST_MASK (0x3 << 10) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP54XX_ISOCLK_OVERRIDE_SHIFT 0 +#define OMAP54XX_ISOCLK_OVERRIDE_WIDTH 0x1 +#define OMAP54XX_ISOCLK_OVERRIDE_MASK (1 << 0) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP54XX_ISOCLK_STATUS_SHIFT 1 +#define OMAP54XX_ISOCLK_STATUS_WIDTH 0x1 +#define OMAP54XX_ISOCLK_STATUS_MASK (1 << 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP54XX_ISOOVR_EXTEND_SHIFT 4 +#define OMAP54XX_ISOOVR_EXTEND_WIDTH 0x1 +#define OMAP54XX_ISOOVR_EXTEND_MASK (1 << 4) + +/* Used by PRM_IO_COUNT */ +#define OMAP54XX_ISO_2_ON_TIME_SHIFT 0 +#define OMAP54XX_ISO_2_ON_TIME_WIDTH 0x8 +#define OMAP54XX_ISO_2_ON_TIME_MASK (0xff << 0) + +/* Used by PM_L3INIT_PWRSTCTRL */ +#define OMAP54XX_L3INIT_BANK1_ONSTATE_SHIFT 16 +#define OMAP54XX_L3INIT_BANK1_ONSTATE_WIDTH 0x2 +#define OMAP54XX_L3INIT_BANK1_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_L3INIT_PWRSTCTRL */ +#define OMAP54XX_L3INIT_BANK1_RETSTATE_SHIFT 8 +#define OMAP54XX_L3INIT_BANK1_RETSTATE_WIDTH 0x1 +#define OMAP54XX_L3INIT_BANK1_RETSTATE_MASK (1 << 8) + +/* Used by PM_L3INIT_PWRSTST */ +#define OMAP54XX_L3INIT_BANK1_STATEST_SHIFT 4 +#define OMAP54XX_L3INIT_BANK1_STATEST_WIDTH 0x2 +#define OMAP54XX_L3INIT_BANK1_STATEST_MASK (0x3 << 4) + +/* Used by PM_L3INIT_PWRSTCTRL */ +#define OMAP54XX_L3INIT_BANK2_ONSTATE_SHIFT 18 +#define OMAP54XX_L3INIT_BANK2_ONSTATE_WIDTH 0x2 +#define OMAP54XX_L3INIT_BANK2_ONSTATE_MASK (0x3 << 18) + +/* Used by PM_L3INIT_PWRSTCTRL */ +#define OMAP54XX_L3INIT_BANK2_RETSTATE_SHIFT 9 +#define OMAP54XX_L3INIT_BANK2_RETSTATE_WIDTH 0x1 +#define OMAP54XX_L3INIT_BANK2_RETSTATE_MASK (1 << 9) + +/* Used by PM_L3INIT_PWRSTST */ +#define OMAP54XX_L3INIT_BANK2_STATEST_SHIFT 6 +#define OMAP54XX_L3INIT_BANK2_STATEST_WIDTH 0x2 +#define OMAP54XX_L3INIT_BANK2_STATEST_MASK (0x3 << 6) + +/* + * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST, + * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST, + * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST + */ +#define OMAP54XX_LASTPOWERSTATEENTERED_SHIFT 24 +#define OMAP54XX_LASTPOWERSTATEENTERED_WIDTH 0x2 +#define OMAP54XX_LASTPOWERSTATEENTERED_MASK (0x3 << 24) + +/* Used by PRM_RSTST */ +#define OMAP54XX_LLI_RST_SHIFT 14 +#define OMAP54XX_LLI_RST_WIDTH 0x1 +#define OMAP54XX_LLI_RST_MASK (1 << 14) + +/* + * Used by PM_ABE_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_DSP_PWRSTCTRL, + * PM_DSS_PWRSTCTRL, PM_IVA_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_MPU_PWRSTCTRL + */ +#define OMAP54XX_LOGICRETSTATE_SHIFT 2 +#define OMAP54XX_LOGICRETSTATE_WIDTH 0x1 +#define OMAP54XX_LOGICRETSTATE_MASK (1 << 2) + +/* + * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST, + * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST, + * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST + */ +#define OMAP54XX_LOGICSTATEST_SHIFT 2 +#define OMAP54XX_LOGICSTATEST_WIDTH 0x1 +#define OMAP54XX_LOGICSTATEST_MASK (1 << 2) + +/* + * Used by RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT, + * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT, + * RM_ABE_MCPDM_CONTEXT, RM_ABE_SLIMBUS1_CONTEXT, RM_ABE_TIMER5_CONTEXT, + * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT, + * RM_ABE_WD_TIMER3_CONTEXT, RM_C2C_C2C_CONTEXT, RM_C2C_C2C_OCP_FW_CONTEXT, + * RM_CAM_CAL_CONTEXT, RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT, + * RM_COREAON_SMARTREFLEX_CORE_CONTEXT, RM_COREAON_SMARTREFLEX_MM_CONTEXT, + * RM_COREAON_SMARTREFLEX_MPU_CONTEXT, RM_CUSTEFUSE_EFUSE_CTRL_CUST_CONTEXT, + * RM_DSP_DSP_CONTEXT, RM_DSS_BB2D_CONTEXT, RM_DSS_DSS_CONTEXT, + * RM_EMIF_DMM_CONTEXT, RM_EMIF_EMIF1_CONTEXT, RM_EMIF_EMIF2_CONTEXT, + * RM_EMIF_EMIF_DLL_CONTEXT, RM_EMIF_EMIF_OCP_FW_CONTEXT, + * RM_EMU_DEBUGSS_CONTEXT, RM_GPU_GPU_CONTEXT, RM_IPU_IPU_CONTEXT, + * RM_IVA_IVA_CONTEXT, RM_IVA_SL2_CONTEXT, RM_L3INIT_IEEE1500_2_OCP_CONTEXT, + * RM_L3INIT_OCP2SCP1_CONTEXT, RM_L3INIT_OCP2SCP3_CONTEXT, + * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_UNIPRO2_CONTEXT, + * RM_L3INSTR_L3_INSTR_CONTEXT, RM_L3INSTR_L3_MAIN_3_CONTEXT, + * RM_L3INSTR_OCP_WP_NOC_CONTEXT, RM_L3MAIN1_L3_MAIN_1_CONTEXT, + * RM_L3MAIN2_L3_MAIN_2_CONTEXT, RM_L3MAIN2_OCMC_RAM_CONTEXT, + * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_OCP2SCP2_CONTEXT, + * RM_L4CFG_SAR_ROM_CONTEXT, RM_L4PER_ELM_CONTEXT, RM_L4PER_HDQ1W_CONTEXT, + * RM_L4PER_I2C2_CONTEXT, RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT, + * RM_L4PER_I2C5_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCSPI1_CONTEXT, + * RM_L4PER_MCSPI2_CONTEXT, RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT, + * RM_L4PER_MMC3_CONTEXT, RM_L4PER_MMC4_CONTEXT, RM_L4PER_MMC5_CONTEXT, + * RM_L4PER_TIMER10_CONTEXT, RM_L4PER_TIMER11_CONTEXT, RM_L4PER_TIMER2_CONTEXT, + * RM_L4PER_TIMER3_CONTEXT, RM_L4PER_TIMER4_CONTEXT, RM_L4PER_TIMER9_CONTEXT, + * RM_L4SEC_FPKA_CONTEXT, RM_MIPIEXT_LLI_CONTEXT, + * RM_MIPIEXT_LLI_OCP_FW_CONTEXT, RM_MIPIEXT_MPHY_CONTEXT, RM_MPU_MPU_CONTEXT, + * RM_WKUPAON_COUNTER_32K_CONTEXT, RM_WKUPAON_GPIO1_CONTEXT, + * RM_WKUPAON_KBD_CONTEXT, RM_WKUPAON_L4_WKUP_CONTEXT, + * RM_WKUPAON_SAR_RAM_CONTEXT, RM_WKUPAON_TIMER12_CONTEXT, + * RM_WKUPAON_TIMER1_CONTEXT, RM_WKUPAON_WD_TIMER1_CONTEXT, + * RM_WKUPAON_WD_TIMER2_CONTEXT + */ +#define OMAP54XX_LOSTCONTEXT_DFF_SHIFT 0 +#define OMAP54XX_LOSTCONTEXT_DFF_WIDTH 0x1 +#define OMAP54XX_LOSTCONTEXT_DFF_MASK (1 << 0) + +/* + * Used by RM_C2C_C2C_CONTEXT, RM_C2C_C2C_OCP_FW_CONTEXT, + * RM_C2C_MODEM_ICR_CONTEXT, RM_DMA_DMA_SYSTEM_CONTEXT, RM_DSP_DSP_CONTEXT, + * RM_DSS_DSS_CONTEXT, RM_EMIF_DMM_CONTEXT, RM_EMIF_EMIF1_CONTEXT, + * RM_EMIF_EMIF2_CONTEXT, RM_EMIF_EMIF_OCP_FW_CONTEXT, RM_IPU_IPU_CONTEXT, + * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, + * RM_L3INIT_USB_HOST_HS_CONTEXT, RM_L3INIT_USB_OTG_SS_CONTEXT, + * RM_L3INIT_USB_TLL_HS_CONTEXT, RM_L3INSTR_L3_MAIN_3_CONTEXT, + * RM_L3INSTR_OCP_WP_NOC_CONTEXT, RM_L3MAIN1_L3_MAIN_1_CONTEXT, + * RM_L3MAIN2_GPMC_CONTEXT, RM_L3MAIN2_L3_MAIN_2_CONTEXT, + * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_MAILBOX_CONTEXT, + * RM_L4CFG_SPINLOCK_CONTEXT, RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT, + * RM_L4PER_GPIO4_CONTEXT, RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT, + * RM_L4PER_GPIO7_CONTEXT, RM_L4PER_GPIO8_CONTEXT, RM_L4PER_I2C1_CONTEXT, + * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT, + * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4PER_UART5_CONTEXT, + * RM_L4PER_UART6_CONTEXT, RM_L4SEC_AES1_CONTEXT, RM_L4SEC_AES2_CONTEXT, + * RM_L4SEC_DES3DES_CONTEXT, RM_L4SEC_DMA_CRYPTO_CONTEXT, RM_L4SEC_RNG_CONTEXT, + * RM_L4SEC_SHA2MD5_CONTEXT, RM_MIPIEXT_LLI_CONTEXT, + * RM_MIPIEXT_LLI_OCP_FW_CONTEXT, RM_MIPIEXT_MPHY_CONTEXT, RM_MPU_MPU_CONTEXT + */ +#define OMAP54XX_LOSTCONTEXT_RFF_SHIFT 1 +#define OMAP54XX_LOSTCONTEXT_RFF_WIDTH 0x1 +#define OMAP54XX_LOSTCONTEXT_RFF_MASK (1 << 1) + +/* Used by RM_ABE_AESS_CONTEXT */ +#define OMAP54XX_LOSTMEM_AESSMEM_SHIFT 8 +#define OMAP54XX_LOSTMEM_AESSMEM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_AESSMEM_MASK (1 << 8) + +/* Used by RM_CAM_CAL_CONTEXT */ +#define OMAP54XX_LOSTMEM_CAL_MEM_SHIFT 8 +#define OMAP54XX_LOSTMEM_CAL_MEM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_CAL_MEM_MASK (1 << 8) + +/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */ +#define OMAP54XX_LOSTMEM_CAM_MEM_SHIFT 8 +#define OMAP54XX_LOSTMEM_CAM_MEM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_CAM_MEM_MASK (1 << 8) + +/* Used by RM_EMIF_DMM_CONTEXT */ +#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_SHIFT 9 +#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_MASK (1 << 9) + +/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_L3INSTR_OCP_WP_NOC_CONTEXT */ +#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_8_8_SHIFT 8 +#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_8_8_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_8_8_MASK (1 << 8) + +/* Used by RM_L3MAIN2_OCMC_RAM_CONTEXT */ +#define OMAP54XX_LOSTMEM_CORE_OCMRAM_SHIFT 8 +#define OMAP54XX_LOSTMEM_CORE_OCMRAM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_CORE_OCMRAM_MASK (1 << 8) + +/* Used by RM_DMA_DMA_SYSTEM_CONTEXT, RM_EMIF_DMM_CONTEXT */ +#define OMAP54XX_LOSTMEM_CORE_OTHER_BANK_SHIFT 8 +#define OMAP54XX_LOSTMEM_CORE_OTHER_BANK_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_CORE_OTHER_BANK_MASK (1 << 8) + +/* Used by RM_DSP_DSP_CONTEXT */ +#define OMAP54XX_LOSTMEM_DSP_EDMA_SHIFT 10 +#define OMAP54XX_LOSTMEM_DSP_EDMA_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_DSP_EDMA_MASK (1 << 10) + +/* Used by RM_DSP_DSP_CONTEXT */ +#define OMAP54XX_LOSTMEM_DSP_L1_SHIFT 8 +#define OMAP54XX_LOSTMEM_DSP_L1_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_DSP_L1_MASK (1 << 8) + +/* Used by RM_DSP_DSP_CONTEXT */ +#define OMAP54XX_LOSTMEM_DSP_L2_SHIFT 9 +#define OMAP54XX_LOSTMEM_DSP_L2_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_DSP_L2_MASK (1 << 9) + +/* Used by RM_DSS_BB2D_CONTEXT, RM_DSS_DSS_CONTEXT */ +#define OMAP54XX_LOSTMEM_DSS_MEM_SHIFT 8 +#define OMAP54XX_LOSTMEM_DSS_MEM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_DSS_MEM_MASK (1 << 8) + +/* Used by RM_EMU_DEBUGSS_CONTEXT */ +#define OMAP54XX_LOSTMEM_EMU_BANK_SHIFT 8 +#define OMAP54XX_LOSTMEM_EMU_BANK_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_EMU_BANK_MASK (1 << 8) + +/* Used by RM_GPU_GPU_CONTEXT */ +#define OMAP54XX_LOSTMEM_GPU_MEM_SHIFT 8 +#define OMAP54XX_LOSTMEM_GPU_MEM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_GPU_MEM_MASK (1 << 8) + +/* Used by RM_IVA_IVA_CONTEXT */ +#define OMAP54XX_LOSTMEM_HWA_MEM_SHIFT 10 +#define OMAP54XX_LOSTMEM_HWA_MEM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_HWA_MEM_MASK (1 << 10) + +/* Used by RM_IPU_IPU_CONTEXT */ +#define OMAP54XX_LOSTMEM_IPU_L2RAM_SHIFT 9 +#define OMAP54XX_LOSTMEM_IPU_L2RAM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_IPU_L2RAM_MASK (1 << 9) + +/* Used by RM_IPU_IPU_CONTEXT */ +#define OMAP54XX_LOSTMEM_IPU_UNICACHE_SHIFT 8 +#define OMAP54XX_LOSTMEM_IPU_UNICACHE_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_IPU_UNICACHE_MASK (1 << 8) + +/* + * Used by RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, + * RM_L3INIT_MMC2_CONTEXT, RM_L3INIT_SATA_CONTEXT, RM_L3INIT_UNIPRO2_CONTEXT, + * RM_L3INIT_USB_OTG_SS_CONTEXT + */ +#define OMAP54XX_LOSTMEM_L3INIT_BANK1_SHIFT 8 +#define OMAP54XX_LOSTMEM_L3INIT_BANK1_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_L3INIT_BANK1_MASK (1 << 8) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP54XX_LOSTMEM_MPU_L2_SHIFT 9 +#define OMAP54XX_LOSTMEM_MPU_L2_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_MPU_L2_MASK (1 << 9) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP54XX_LOSTMEM_MPU_RAM_SHIFT 10 +#define OMAP54XX_LOSTMEM_MPU_RAM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_MPU_RAM_MASK (1 << 10) + +/* + * Used by RM_L4PER_MMC3_CONTEXT, RM_L4PER_MMC4_CONTEXT, RM_L4PER_MMC5_CONTEXT, + * RM_L4SEC_FPKA_CONTEXT + */ +#define OMAP54XX_LOSTMEM_NONRETAINED_BANK_SHIFT 8 +#define OMAP54XX_LOSTMEM_NONRETAINED_BANK_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_NONRETAINED_BANK_MASK (1 << 8) + +/* + * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, + * RM_ABE_MCBSP3_CONTEXT, RM_ABE_MCPDM_CONTEXT, RM_ABE_SLIMBUS1_CONTEXT + */ +#define OMAP54XX_LOSTMEM_PERIHPMEM_SHIFT 8 +#define OMAP54XX_LOSTMEM_PERIHPMEM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_PERIHPMEM_MASK (1 << 8) + +/* + * Used by RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT, + * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4PER_UART5_CONTEXT, + * RM_L4PER_UART6_CONTEXT, RM_L4SEC_DMA_CRYPTO_CONTEXT + */ +#define OMAP54XX_LOSTMEM_RETAINED_BANK_SHIFT 8 +#define OMAP54XX_LOSTMEM_RETAINED_BANK_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_RETAINED_BANK_MASK (1 << 8) + +/* Used by RM_IVA_SL2_CONTEXT */ +#define OMAP54XX_LOSTMEM_SL2_MEM_SHIFT 8 +#define OMAP54XX_LOSTMEM_SL2_MEM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_SL2_MEM_MASK (1 << 8) + +/* Used by RM_IVA_IVA_CONTEXT */ +#define OMAP54XX_LOSTMEM_TCM1_MEM_SHIFT 8 +#define OMAP54XX_LOSTMEM_TCM1_MEM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_TCM1_MEM_MASK (1 << 8) + +/* Used by RM_IVA_IVA_CONTEXT */ +#define OMAP54XX_LOSTMEM_TCM2_MEM_SHIFT 9 +#define OMAP54XX_LOSTMEM_TCM2_MEM_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_TCM2_MEM_MASK (1 << 9) + +/* Used by RM_WKUPAON_SAR_RAM_CONTEXT */ +#define OMAP54XX_LOSTMEM_WKUP_BANK_SHIFT 8 +#define OMAP54XX_LOSTMEM_WKUP_BANK_WIDTH 0x1 +#define OMAP54XX_LOSTMEM_WKUP_BANK_MASK (1 << 8) + +/* + * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CORE_PWRSTCTRL, + * PM_CUSTEFUSE_PWRSTCTRL, PM_DSP_PWRSTCTRL, PM_DSS_PWRSTCTRL, + * PM_GPU_PWRSTCTRL, PM_IVA_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_MPU_PWRSTCTRL + */ +#define OMAP54XX_LOWPOWERSTATECHANGE_SHIFT 4 +#define OMAP54XX_LOWPOWERSTATECHANGE_WIDTH 0x1 +#define OMAP54XX_LOWPOWERSTATECHANGE_MASK (1 << 4) + +/* Used by PRM_DEBUG_TRANS_CFG */ +#define OMAP54XX_MODE_SHIFT 0 +#define OMAP54XX_MODE_WIDTH 0x2 +#define OMAP54XX_MODE_MASK (0x3 << 0) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP54XX_MODEM_SHUTDOWN_IRQ_SHIFT 9 +#define OMAP54XX_MODEM_SHUTDOWN_IRQ_WIDTH 0x1 +#define OMAP54XX_MODEM_SHUTDOWN_IRQ_MASK (1 << 9) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP54XX_MODEM_WAKE_IRQ_SHIFT 8 +#define OMAP54XX_MODEM_WAKE_IRQ_WIDTH 0x1 +#define OMAP54XX_MODEM_WAKE_IRQ_MASK (1 << 8) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP54XX_MPU_L2_ONSTATE_SHIFT 18 +#define OMAP54XX_MPU_L2_ONSTATE_WIDTH 0x2 +#define OMAP54XX_MPU_L2_ONSTATE_MASK (0x3 << 18) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP54XX_MPU_L2_RETSTATE_SHIFT 9 +#define OMAP54XX_MPU_L2_RETSTATE_WIDTH 0x1 +#define OMAP54XX_MPU_L2_RETSTATE_MASK (1 << 9) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP54XX_MPU_L2_STATEST_SHIFT 6 +#define OMAP54XX_MPU_L2_STATEST_WIDTH 0x2 +#define OMAP54XX_MPU_L2_STATEST_MASK (0x3 << 6) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP54XX_MPU_RAM_ONSTATE_SHIFT 20 +#define OMAP54XX_MPU_RAM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_MPU_RAM_ONSTATE_MASK (0x3 << 20) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP54XX_MPU_RAM_RETSTATE_SHIFT 10 +#define OMAP54XX_MPU_RAM_RETSTATE_WIDTH 0x1 +#define OMAP54XX_MPU_RAM_RETSTATE_MASK (1 << 10) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP54XX_MPU_RAM_STATEST_SHIFT 8 +#define OMAP54XX_MPU_RAM_STATEST_WIDTH 0x2 +#define OMAP54XX_MPU_RAM_STATEST_MASK (0x3 << 8) + +/* Used by PRM_RSTST */ +#define OMAP54XX_MPU_SECURITY_VIOL_RST_SHIFT 2 +#define OMAP54XX_MPU_SECURITY_VIOL_RST_WIDTH 0x1 +#define OMAP54XX_MPU_SECURITY_VIOL_RST_MASK (1 << 2) + +/* Used by PRM_RSTST */ +#define OMAP54XX_MPU_WDT_RST_SHIFT 3 +#define OMAP54XX_MPU_WDT_RST_WIDTH 0x1 +#define OMAP54XX_MPU_WDT_RST_MASK (1 << 3) + +/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */ +#define OMAP54XX_NOCAP_SHIFT 4 +#define OMAP54XX_NOCAP_WIDTH 0x1 +#define OMAP54XX_NOCAP_MASK (1 << 4) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP54XX_OCP_NRET_BANK_ONSTATE_SHIFT 24 +#define OMAP54XX_OCP_NRET_BANK_ONSTATE_WIDTH 0x2 +#define OMAP54XX_OCP_NRET_BANK_ONSTATE_MASK (0x3 << 24) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP54XX_OCP_NRET_BANK_RETSTATE_SHIFT 12 +#define OMAP54XX_OCP_NRET_BANK_RETSTATE_WIDTH 0x1 +#define OMAP54XX_OCP_NRET_BANK_RETSTATE_MASK (1 << 12) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP54XX_OCP_NRET_BANK_STATEST_SHIFT 12 +#define OMAP54XX_OCP_NRET_BANK_STATEST_WIDTH 0x2 +#define OMAP54XX_OCP_NRET_BANK_STATEST_MASK (0x3 << 12) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP54XX_OFF_SHIFT 0 +#define OMAP54XX_OFF_WIDTH 0x8 +#define OMAP54XX_OFF_MASK (0xff << 0) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP54XX_ON_SHIFT 24 +#define OMAP54XX_ON_WIDTH 0x8 +#define OMAP54XX_ON_MASK (0xff << 24) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP54XX_ONLP_SHIFT 16 +#define OMAP54XX_ONLP_WIDTH 0x8 +#define OMAP54XX_ONLP_MASK (0xff << 16) + +/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */ +#define OMAP54XX_OPP_CHANGE_SHIFT 2 +#define OMAP54XX_OPP_CHANGE_WIDTH 0x1 +#define OMAP54XX_OPP_CHANGE_MASK (1 << 2) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP54XX_OPP_CHANGE_EMIF_LVL_SHIFT 25 +#define OMAP54XX_OPP_CHANGE_EMIF_LVL_WIDTH 0x1 +#define OMAP54XX_OPP_CHANGE_EMIF_LVL_MASK (1 << 25) + +/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */ +#define OMAP54XX_OPP_SEL_SHIFT 0 +#define OMAP54XX_OPP_SEL_WIDTH 0x2 +#define OMAP54XX_OPP_SEL_MASK (0x3 << 0) + +/* Used by PRM_DEBUG_OUT */ +#define OMAP54XX_OUTPUT_SHIFT 0 +#define OMAP54XX_OUTPUT_WIDTH 0x20 +#define OMAP54XX_OUTPUT_MASK (0xffffffff << 0) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP54XX_PCHARGECNT_VALUE_SHIFT 0 +#define OMAP54XX_PCHARGECNT_VALUE_WIDTH 0x6 +#define OMAP54XX_PCHARGECNT_VALUE_MASK (0x3f << 0) + +/* Used by PRM_PSCON_COUNT */ +#define OMAP54XX_PCHARGE_TIME_SHIFT 0 +#define OMAP54XX_PCHARGE_TIME_WIDTH 0x8 +#define OMAP54XX_PCHARGE_TIME_MASK (0xff << 0) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP54XX_PERIPHMEM_ONSTATE_SHIFT 20 +#define OMAP54XX_PERIPHMEM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_PERIPHMEM_ONSTATE_MASK (0x3 << 20) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP54XX_PERIPHMEM_RETSTATE_SHIFT 10 +#define OMAP54XX_PERIPHMEM_RETSTATE_WIDTH 0x1 +#define OMAP54XX_PERIPHMEM_RETSTATE_MASK (1 << 10) + +/* Used by PM_ABE_PWRSTST */ +#define OMAP54XX_PERIPHMEM_STATEST_SHIFT 8 +#define OMAP54XX_PERIPHMEM_STATEST_WIDTH 0x2 +#define OMAP54XX_PERIPHMEM_STATEST_MASK (0x3 << 8) + +/* Used by PRM_PHASE1_CNDP */ +#define OMAP54XX_PHASE1_CNDP_SHIFT 0 +#define OMAP54XX_PHASE1_CNDP_WIDTH 0x20 +#define OMAP54XX_PHASE1_CNDP_MASK (0xffffffff << 0) + +/* Used by PRM_PHASE2A_CNDP */ +#define OMAP54XX_PHASE2A_CNDP_SHIFT 0 +#define OMAP54XX_PHASE2A_CNDP_WIDTH 0x20 +#define OMAP54XX_PHASE2A_CNDP_MASK (0xffffffff << 0) + +/* Used by PRM_PHASE2B_CNDP */ +#define OMAP54XX_PHASE2B_CNDP_SHIFT 0 +#define OMAP54XX_PHASE2B_CNDP_WIDTH 0x20 +#define OMAP54XX_PHASE2B_CNDP_MASK (0xffffffff << 0) + +/* Used by PRM_PSCON_COUNT */ +#define OMAP54XX_PONOUT_2_PGOODIN_TIME_SHIFT 8 +#define OMAP54XX_PONOUT_2_PGOODIN_TIME_WIDTH 0x8 +#define OMAP54XX_PONOUT_2_PGOODIN_TIME_MASK (0xff << 8) + +/* + * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CORE_PWRSTCTRL, + * PM_CUSTEFUSE_PWRSTCTRL, PM_DSP_PWRSTCTRL, PM_DSS_PWRSTCTRL, + * PM_EMU_PWRSTCTRL, PM_GPU_PWRSTCTRL, PM_IVA_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, + * PM_MPU_PWRSTCTRL + */ +#define OMAP54XX_POWERSTATE_SHIFT 0 +#define OMAP54XX_POWERSTATE_WIDTH 0x2 +#define OMAP54XX_POWERSTATE_MASK (0x3 << 0) + +/* + * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST, + * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST, + * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST + */ +#define OMAP54XX_POWERSTATEST_SHIFT 0 +#define OMAP54XX_POWERSTATEST_WIDTH 0x2 +#define OMAP54XX_POWERSTATEST_MASK (0x3 << 0) + +/* Used by PRM_PWRREQCTRL */ +#define OMAP54XX_PWRREQ_COND_SHIFT 0 +#define OMAP54XX_PWRREQ_COND_WIDTH 0x2 +#define OMAP54XX_PWRREQ_COND_MASK (0x3 << 0) + +/* Used by PRM_VC_SMPS_CORE_CONFIG */ +#define OMAP54XX_RACEN_VDD_CORE_L_SHIFT 27 +#define OMAP54XX_RACEN_VDD_CORE_L_WIDTH 0x1 +#define OMAP54XX_RACEN_VDD_CORE_L_MASK (1 << 27) + +/* Used by PRM_VC_SMPS_MM_CONFIG */ +#define OMAP54XX_RACEN_VDD_MM_L_SHIFT 27 +#define OMAP54XX_RACEN_VDD_MM_L_WIDTH 0x1 +#define OMAP54XX_RACEN_VDD_MM_L_MASK (1 << 27) + +/* Used by PRM_VC_SMPS_MPU_CONFIG */ +#define OMAP54XX_RACEN_VDD_MPU_L_SHIFT 27 +#define OMAP54XX_RACEN_VDD_MPU_L_WIDTH 0x1 +#define OMAP54XX_RACEN_VDD_MPU_L_MASK (1 << 27) + +/* Used by PRM_VC_SMPS_CORE_CONFIG */ +#define OMAP54XX_RAC_VDD_CORE_L_SHIFT 26 +#define OMAP54XX_RAC_VDD_CORE_L_WIDTH 0x1 +#define OMAP54XX_RAC_VDD_CORE_L_MASK (1 << 26) + +/* Used by PRM_VC_SMPS_MM_CONFIG */ +#define OMAP54XX_RAC_VDD_MM_L_SHIFT 26 +#define OMAP54XX_RAC_VDD_MM_L_WIDTH 0x1 +#define OMAP54XX_RAC_VDD_MM_L_MASK (1 << 26) + +/* Used by PRM_VC_SMPS_MPU_CONFIG */ +#define OMAP54XX_RAC_VDD_MPU_L_SHIFT 26 +#define OMAP54XX_RAC_VDD_MPU_L_WIDTH 0x1 +#define OMAP54XX_RAC_VDD_MPU_L_MASK (1 << 26) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP54XX_RAMP_DOWN_COUNT_SHIFT 16 +#define OMAP54XX_RAMP_DOWN_COUNT_WIDTH 0x6 +#define OMAP54XX_RAMP_DOWN_COUNT_MASK (0x3f << 16) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP54XX_RAMP_DOWN_PRESCAL_SHIFT 24 +#define OMAP54XX_RAMP_DOWN_PRESCAL_WIDTH 0x2 +#define OMAP54XX_RAMP_DOWN_PRESCAL_MASK (0x3 << 24) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP54XX_RAMP_UP_COUNT_SHIFT 0 +#define OMAP54XX_RAMP_UP_COUNT_WIDTH 0x6 +#define OMAP54XX_RAMP_UP_COUNT_MASK (0x3f << 0) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP54XX_RAMP_UP_PRESCAL_SHIFT 8 +#define OMAP54XX_RAMP_UP_PRESCAL_WIDTH 0x2 +#define OMAP54XX_RAMP_UP_PRESCAL_MASK (0x3 << 8) + +/* Used by PRM_VC_SMPS_CORE_CONFIG */ +#define OMAP54XX_RAV_VDD_CORE_L_SHIFT 25 +#define OMAP54XX_RAV_VDD_CORE_L_WIDTH 0x1 +#define OMAP54XX_RAV_VDD_CORE_L_MASK (1 << 25) + +/* Used by PRM_VC_SMPS_MM_CONFIG */ +#define OMAP54XX_RAV_VDD_MM_L_SHIFT 25 +#define OMAP54XX_RAV_VDD_MM_L_WIDTH 0x1 +#define OMAP54XX_RAV_VDD_MM_L_MASK (1 << 25) + +/* Used by PRM_VC_SMPS_MPU_CONFIG */ +#define OMAP54XX_RAV_VDD_MPU_L_SHIFT 25 +#define OMAP54XX_RAV_VDD_MPU_L_WIDTH 0x1 +#define OMAP54XX_RAV_VDD_MPU_L_MASK (1 << 25) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP54XX_REGADDR_SHIFT 8 +#define OMAP54XX_REGADDR_WIDTH 0x8 +#define OMAP54XX_REGADDR_MASK (0xff << 8) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP54XX_RET_SHIFT 8 +#define OMAP54XX_RET_WIDTH 0x8 +#define OMAP54XX_RET_MASK (0xff << 8) + +/* Used by PRM_SLDO_CORE_CTRL, PRM_SLDO_MM_CTRL, PRM_SLDO_MPU_CTRL */ +#define OMAP54XX_RETMODE_ENABLE_SHIFT 0 +#define OMAP54XX_RETMODE_ENABLE_WIDTH 0x1 +#define OMAP54XX_RETMODE_ENABLE_MASK (1 << 0) + +/* Used by PRM_RSTTIME */ +#define OMAP54XX_RSTTIME1_SHIFT 0 +#define OMAP54XX_RSTTIME1_WIDTH 0xa +#define OMAP54XX_RSTTIME1_MASK (0x3ff << 0) + +/* Used by PRM_RSTTIME */ +#define OMAP54XX_RSTTIME2_SHIFT 10 +#define OMAP54XX_RSTTIME2_WIDTH 0x5 +#define OMAP54XX_RSTTIME2_MASK (0x1f << 10) + +/* Used by RM_IPU_RSTCTRL, RM_IPU_RSTST */ +#define OMAP54XX_RST_CPU0_SHIFT 0 +#define OMAP54XX_RST_CPU0_WIDTH 0x1 +#define OMAP54XX_RST_CPU0_MASK (1 << 0) + +/* Used by RM_IPU_RSTCTRL, RM_IPU_RSTST */ +#define OMAP54XX_RST_CPU1_SHIFT 1 +#define OMAP54XX_RST_CPU1_WIDTH 0x1 +#define OMAP54XX_RST_CPU1_MASK (1 << 1) + +/* Used by RM_DSP_RSTCTRL, RM_DSP_RSTST */ +#define OMAP54XX_RST_DSP_SHIFT 0 +#define OMAP54XX_RST_DSP_WIDTH 0x1 +#define OMAP54XX_RST_DSP_MASK (1 << 0) + +/* Used by RM_DSP_RSTST */ +#define OMAP54XX_RST_DSP_EMU_SHIFT 2 +#define OMAP54XX_RST_DSP_EMU_WIDTH 0x1 +#define OMAP54XX_RST_DSP_EMU_MASK (1 << 2) + +/* Used by RM_DSP_RSTST */ +#define OMAP54XX_RST_DSP_EMU_REQ_SHIFT 3 +#define OMAP54XX_RST_DSP_EMU_REQ_WIDTH 0x1 +#define OMAP54XX_RST_DSP_EMU_REQ_MASK (1 << 3) + +/* Used by RM_DSP_RSTCTRL, RM_DSP_RSTST */ +#define OMAP54XX_RST_DSP_MMU_CACHE_SHIFT 1 +#define OMAP54XX_RST_DSP_MMU_CACHE_WIDTH 0x1 +#define OMAP54XX_RST_DSP_MMU_CACHE_MASK (1 << 1) + +/* Used by RM_IPU_RSTST */ +#define OMAP54XX_RST_EMULATION_CPU0_SHIFT 3 +#define OMAP54XX_RST_EMULATION_CPU0_WIDTH 0x1 +#define OMAP54XX_RST_EMULATION_CPU0_MASK (1 << 3) + +/* Used by RM_IPU_RSTST */ +#define OMAP54XX_RST_EMULATION_CPU1_SHIFT 4 +#define OMAP54XX_RST_EMULATION_CPU1_WIDTH 0x1 +#define OMAP54XX_RST_EMULATION_CPU1_MASK (1 << 4) + +/* Used by RM_IVA_RSTST */ +#define OMAP54XX_RST_EMULATION_SEQ1_SHIFT 3 +#define OMAP54XX_RST_EMULATION_SEQ1_WIDTH 0x1 +#define OMAP54XX_RST_EMULATION_SEQ1_MASK (1 << 3) + +/* Used by RM_IVA_RSTST */ +#define OMAP54XX_RST_EMULATION_SEQ2_SHIFT 4 +#define OMAP54XX_RST_EMULATION_SEQ2_WIDTH 0x1 +#define OMAP54XX_RST_EMULATION_SEQ2_MASK (1 << 4) + +/* Used by PRM_RSTCTRL */ +#define OMAP54XX_RST_GLOBAL_COLD_SW_SHIFT 1 +#define OMAP54XX_RST_GLOBAL_COLD_SW_WIDTH 0x1 +#define OMAP54XX_RST_GLOBAL_COLD_SW_MASK (1 << 1) + +/* Used by PRM_RSTCTRL */ +#define OMAP54XX_RST_GLOBAL_WARM_SW_SHIFT 0 +#define OMAP54XX_RST_GLOBAL_WARM_SW_WIDTH 0x1 +#define OMAP54XX_RST_GLOBAL_WARM_SW_MASK (1 << 0) + +/* Used by RM_IPU_RSTST */ +#define OMAP54XX_RST_ICECRUSHER_CPU0_SHIFT 5 +#define OMAP54XX_RST_ICECRUSHER_CPU0_WIDTH 0x1 +#define OMAP54XX_RST_ICECRUSHER_CPU0_MASK (1 << 5) + +/* Used by RM_IPU_RSTST */ +#define OMAP54XX_RST_ICECRUSHER_CPU1_SHIFT 6 +#define OMAP54XX_RST_ICECRUSHER_CPU1_WIDTH 0x1 +#define OMAP54XX_RST_ICECRUSHER_CPU1_MASK (1 << 6) + +/* Used by RM_IVA_RSTST */ +#define OMAP54XX_RST_ICECRUSHER_SEQ1_SHIFT 5 +#define OMAP54XX_RST_ICECRUSHER_SEQ1_WIDTH 0x1 +#define OMAP54XX_RST_ICECRUSHER_SEQ1_MASK (1 << 5) + +/* Used by RM_IVA_RSTST */ +#define OMAP54XX_RST_ICECRUSHER_SEQ2_SHIFT 6 +#define OMAP54XX_RST_ICECRUSHER_SEQ2_WIDTH 0x1 +#define OMAP54XX_RST_ICECRUSHER_SEQ2_MASK (1 << 6) + +/* Used by RM_IPU_RSTCTRL, RM_IPU_RSTST */ +#define OMAP54XX_RST_IPU_MMU_CACHE_SHIFT 2 +#define OMAP54XX_RST_IPU_MMU_CACHE_WIDTH 0x1 +#define OMAP54XX_RST_IPU_MMU_CACHE_MASK (1 << 2) + +/* Used by RM_IVA_RSTCTRL, RM_IVA_RSTST */ +#define OMAP54XX_RST_LOGIC_SHIFT 2 +#define OMAP54XX_RST_LOGIC_WIDTH 0x1 +#define OMAP54XX_RST_LOGIC_MASK (1 << 2) + +/* Used by RM_IVA_RSTCTRL, RM_IVA_RSTST */ +#define OMAP54XX_RST_SEQ1_SHIFT 0 +#define OMAP54XX_RST_SEQ1_WIDTH 0x1 +#define OMAP54XX_RST_SEQ1_MASK (1 << 0) + +/* Used by RM_IVA_RSTCTRL, RM_IVA_RSTST */ +#define OMAP54XX_RST_SEQ2_SHIFT 1 +#define OMAP54XX_RST_SEQ2_WIDTH 0x1 +#define OMAP54XX_RST_SEQ2_MASK (1 << 1) + +/* Used by REVISION_PRM */ +#define OMAP54XX_R_RTL_SHIFT 11 +#define OMAP54XX_R_RTL_WIDTH 0x5 +#define OMAP54XX_R_RTL_MASK (0x1f << 11) + +/* Used by PRM_VC_SMPS_CORE_CONFIG */ +#define OMAP54XX_SA_VDD_CORE_L_SHIFT 0 +#define OMAP54XX_SA_VDD_CORE_L_WIDTH 0x7 +#define OMAP54XX_SA_VDD_CORE_L_MASK (0x7f << 0) + +/* Used by PRM_VC_SMPS_MM_CONFIG */ +#define OMAP54XX_SA_VDD_MM_L_SHIFT 0 +#define OMAP54XX_SA_VDD_MM_L_WIDTH 0x7 +#define OMAP54XX_SA_VDD_MM_L_MASK (0x7f << 0) + +/* Used by PRM_VC_SMPS_MPU_CONFIG */ +#define OMAP54XX_SA_VDD_MPU_L_SHIFT 0 +#define OMAP54XX_SA_VDD_MPU_L_WIDTH 0x7 +#define OMAP54XX_SA_VDD_MPU_L_MASK (0x7f << 0) + +/* Used by REVISION_PRM */ +#define OMAP54XX_SCHEME_SHIFT 30 +#define OMAP54XX_SCHEME_WIDTH 0x2 +#define OMAP54XX_SCHEME_MASK (0x3 << 30) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP54XX_SCLH_SHIFT 0 +#define OMAP54XX_SCLH_WIDTH 0x8 +#define OMAP54XX_SCLH_MASK (0xff << 0) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP54XX_SCLL_SHIFT 8 +#define OMAP54XX_SCLL_WIDTH 0x8 +#define OMAP54XX_SCLL_MASK (0xff << 8) + +/* Used by PRM_RSTST */ +#define OMAP54XX_SECURE_WDT_RST_SHIFT 4 +#define OMAP54XX_SECURE_WDT_RST_WIDTH 0x1 +#define OMAP54XX_SECURE_WDT_RST_MASK (1 << 4) + +/* Used by PRM_VC_SMPS_CORE_CONFIG */ +#define OMAP54XX_SEL_SA_VDD_CORE_L_SHIFT 24 +#define OMAP54XX_SEL_SA_VDD_CORE_L_WIDTH 0x1 +#define OMAP54XX_SEL_SA_VDD_CORE_L_MASK (1 << 24) + +/* Used by PRM_VC_SMPS_MM_CONFIG */ +#define OMAP54XX_SEL_SA_VDD_MM_L_SHIFT 24 +#define OMAP54XX_SEL_SA_VDD_MM_L_WIDTH 0x1 +#define OMAP54XX_SEL_SA_VDD_MM_L_MASK (1 << 24) + +/* Used by PRM_VC_SMPS_MPU_CONFIG */ +#define OMAP54XX_SEL_SA_VDD_MPU_L_SHIFT 24 +#define OMAP54XX_SEL_SA_VDD_MPU_L_WIDTH 0x1 +#define OMAP54XX_SEL_SA_VDD_MPU_L_MASK (1 << 24) + +/* Used by PM_IVA_PWRSTCTRL */ +#define OMAP54XX_SL2_MEM_ONSTATE_SHIFT 18 +#define OMAP54XX_SL2_MEM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_SL2_MEM_ONSTATE_MASK (0x3 << 18) + +/* Used by PM_IVA_PWRSTCTRL */ +#define OMAP54XX_SL2_MEM_RETSTATE_SHIFT 9 +#define OMAP54XX_SL2_MEM_RETSTATE_WIDTH 0x1 +#define OMAP54XX_SL2_MEM_RETSTATE_MASK (1 << 9) + +/* Used by PM_IVA_PWRSTST */ +#define OMAP54XX_SL2_MEM_STATEST_SHIFT 6 +#define OMAP54XX_SL2_MEM_STATEST_WIDTH 0x2 +#define OMAP54XX_SL2_MEM_STATEST_MASK (0x3 << 6) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP54XX_SLAVEADDR_SHIFT 0 +#define OMAP54XX_SLAVEADDR_WIDTH 0x7 +#define OMAP54XX_SLAVEADDR_MASK (0x7f << 0) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP54XX_SLPCNT_VALUE_SHIFT 16 +#define OMAP54XX_SLPCNT_VALUE_WIDTH 0x8 +#define OMAP54XX_SLPCNT_VALUE_MASK (0xff << 16) + +/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_MM_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */ +#define OMAP54XX_SMPSWAITTIMEMAX_SHIFT 8 +#define OMAP54XX_SMPSWAITTIMEMAX_WIDTH 0x10 +#define OMAP54XX_SMPSWAITTIMEMAX_MASK (0xffff << 8) + +/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_MM_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */ +#define OMAP54XX_SMPSWAITTIMEMIN_SHIFT 8 +#define OMAP54XX_SMPSWAITTIMEMIN_WIDTH 0x10 +#define OMAP54XX_SMPSWAITTIMEMIN_MASK (0xffff << 8) + +/* Used by PRM_VC_CORE_ERRST */ +#define OMAP54XX_SMPS_RA_ERR_CORE_SHIFT 1 +#define OMAP54XX_SMPS_RA_ERR_CORE_WIDTH 0x1 +#define OMAP54XX_SMPS_RA_ERR_CORE_MASK (1 << 1) + +/* Used by PRM_VC_MM_ERRST */ +#define OMAP54XX_SMPS_RA_ERR_MM_SHIFT 1 +#define OMAP54XX_SMPS_RA_ERR_MM_WIDTH 0x1 +#define OMAP54XX_SMPS_RA_ERR_MM_MASK (1 << 1) + +/* Used by PRM_VC_MPU_ERRST */ +#define OMAP54XX_SMPS_RA_ERR_MPU_SHIFT 1 +#define OMAP54XX_SMPS_RA_ERR_MPU_WIDTH 0x1 +#define OMAP54XX_SMPS_RA_ERR_MPU_MASK (1 << 1) + +/* Used by PRM_VC_CORE_ERRST */ +#define OMAP54XX_SMPS_SA_ERR_CORE_SHIFT 0 +#define OMAP54XX_SMPS_SA_ERR_CORE_WIDTH 0x1 +#define OMAP54XX_SMPS_SA_ERR_CORE_MASK (1 << 0) + +/* Used by PRM_VC_MM_ERRST */ +#define OMAP54XX_SMPS_SA_ERR_MM_SHIFT 0 +#define OMAP54XX_SMPS_SA_ERR_MM_WIDTH 0x1 +#define OMAP54XX_SMPS_SA_ERR_MM_MASK (1 << 0) + +/* Used by PRM_VC_MPU_ERRST */ +#define OMAP54XX_SMPS_SA_ERR_MPU_SHIFT 0 +#define OMAP54XX_SMPS_SA_ERR_MPU_WIDTH 0x1 +#define OMAP54XX_SMPS_SA_ERR_MPU_MASK (1 << 0) + +/* Used by PRM_VC_CORE_ERRST */ +#define OMAP54XX_SMPS_TIMEOUT_ERR_CORE_SHIFT 2 +#define OMAP54XX_SMPS_TIMEOUT_ERR_CORE_WIDTH 0x1 +#define OMAP54XX_SMPS_TIMEOUT_ERR_CORE_MASK (1 << 2) + +/* Used by PRM_VC_MM_ERRST */ +#define OMAP54XX_SMPS_TIMEOUT_ERR_MM_SHIFT 2 +#define OMAP54XX_SMPS_TIMEOUT_ERR_MM_WIDTH 0x1 +#define OMAP54XX_SMPS_TIMEOUT_ERR_MM_MASK (1 << 2) + +/* Used by PRM_VC_MPU_ERRST */ +#define OMAP54XX_SMPS_TIMEOUT_ERR_MPU_SHIFT 2 +#define OMAP54XX_SMPS_TIMEOUT_ERR_MPU_WIDTH 0x1 +#define OMAP54XX_SMPS_TIMEOUT_ERR_MPU_MASK (1 << 2) + +/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */ +#define OMAP54XX_SR2EN_SHIFT 0 +#define OMAP54XX_SR2EN_WIDTH 0x1 +#define OMAP54XX_SR2EN_MASK (1 << 0) + +/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */ +#define OMAP54XX_SR2_IN_TRANSITION_SHIFT 6 +#define OMAP54XX_SR2_IN_TRANSITION_WIDTH 0x1 +#define OMAP54XX_SR2_IN_TRANSITION_MASK (1 << 6) + +/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */ +#define OMAP54XX_SR2_STATUS_SHIFT 3 +#define OMAP54XX_SR2_STATUS_WIDTH 0x2 +#define OMAP54XX_SR2_STATUS_MASK (0x3 << 3) + +/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */ +#define OMAP54XX_SR2_WTCNT_VALUE_SHIFT 8 +#define OMAP54XX_SR2_WTCNT_VALUE_WIDTH 0x8 +#define OMAP54XX_SR2_WTCNT_VALUE_MASK (0xff << 8) + +/* Used by PRM_SLDO_CORE_CTRL, PRM_SLDO_MM_CTRL, PRM_SLDO_MPU_CTRL */ +#define OMAP54XX_SRAMLDO_STATUS_SHIFT 8 +#define OMAP54XX_SRAMLDO_STATUS_WIDTH 0x1 +#define OMAP54XX_SRAMLDO_STATUS_MASK (1 << 8) + +/* Used by PRM_SLDO_CORE_CTRL, PRM_SLDO_MM_CTRL, PRM_SLDO_MPU_CTRL */ +#define OMAP54XX_SRAM_IN_TRANSITION_SHIFT 9 +#define OMAP54XX_SRAM_IN_TRANSITION_WIDTH 0x1 +#define OMAP54XX_SRAM_IN_TRANSITION_MASK (1 << 9) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP54XX_SRMODEEN_SHIFT 4 +#define OMAP54XX_SRMODEEN_WIDTH 0x1 +#define OMAP54XX_SRMODEEN_MASK (1 << 4) + +/* Used by PRM_VOLTSETUP_WARMRESET */ +#define OMAP54XX_STABLE_COUNT_SHIFT 0 +#define OMAP54XX_STABLE_COUNT_WIDTH 0x6 +#define OMAP54XX_STABLE_COUNT_MASK (0x3f << 0) + +/* Used by PRM_VOLTSETUP_WARMRESET */ +#define OMAP54XX_STABLE_PRESCAL_SHIFT 8 +#define OMAP54XX_STABLE_PRESCAL_WIDTH 0x2 +#define OMAP54XX_STABLE_PRESCAL_MASK (0x3 << 8) + +/* Used by PRM_BANDGAP_SETUP */ +#define OMAP54XX_STARTUP_COUNT_SHIFT 0 +#define OMAP54XX_STARTUP_COUNT_WIDTH 0x8 +#define OMAP54XX_STARTUP_COUNT_MASK (0xff << 0) + +/* Renamed from STARTUP_COUNT Used by PRM_SRAM_COUNT */ +#define OMAP54XX_STARTUP_COUNT_24_31_SHIFT 24 +#define OMAP54XX_STARTUP_COUNT_24_31_WIDTH 0x8 +#define OMAP54XX_STARTUP_COUNT_24_31_MASK (0xff << 24) + +/* Used by PM_IVA_PWRSTCTRL */ +#define OMAP54XX_TCM1_MEM_ONSTATE_SHIFT 20 +#define OMAP54XX_TCM1_MEM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_TCM1_MEM_ONSTATE_MASK (0x3 << 20) + +/* Used by PM_IVA_PWRSTCTRL */ +#define OMAP54XX_TCM1_MEM_RETSTATE_SHIFT 10 +#define OMAP54XX_TCM1_MEM_RETSTATE_WIDTH 0x1 +#define OMAP54XX_TCM1_MEM_RETSTATE_MASK (1 << 10) + +/* Used by PM_IVA_PWRSTST */ +#define OMAP54XX_TCM1_MEM_STATEST_SHIFT 8 +#define OMAP54XX_TCM1_MEM_STATEST_WIDTH 0x2 +#define OMAP54XX_TCM1_MEM_STATEST_MASK (0x3 << 8) + +/* Used by PM_IVA_PWRSTCTRL */ +#define OMAP54XX_TCM2_MEM_ONSTATE_SHIFT 22 +#define OMAP54XX_TCM2_MEM_ONSTATE_WIDTH 0x2 +#define OMAP54XX_TCM2_MEM_ONSTATE_MASK (0x3 << 22) + +/* Used by PM_IVA_PWRSTCTRL */ +#define OMAP54XX_TCM2_MEM_RETSTATE_SHIFT 11 +#define OMAP54XX_TCM2_MEM_RETSTATE_WIDTH 0x1 +#define OMAP54XX_TCM2_MEM_RETSTATE_MASK (1 << 11) + +/* Used by PM_IVA_PWRSTST */ +#define OMAP54XX_TCM2_MEM_STATEST_SHIFT 10 +#define OMAP54XX_TCM2_MEM_STATEST_WIDTH 0x2 +#define OMAP54XX_TCM2_MEM_STATEST_MASK (0x3 << 10) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_MM_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP54XX_TIMEOUT_SHIFT 0 +#define OMAP54XX_TIMEOUT_WIDTH 0x10 +#define OMAP54XX_TIMEOUT_MASK (0xffff << 0) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP54XX_TIMEOUTEN_SHIFT 3 +#define OMAP54XX_TIMEOUTEN_WIDTH 0x1 +#define OMAP54XX_TIMEOUTEN_MASK (1 << 3) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_TRANSITION_EN_SHIFT 8 +#define OMAP54XX_TRANSITION_EN_WIDTH 0x1 +#define OMAP54XX_TRANSITION_EN_MASK (1 << 8) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_TRANSITION_ST_SHIFT 8 +#define OMAP54XX_TRANSITION_ST_WIDTH 0x1 +#define OMAP54XX_TRANSITION_ST_MASK (1 << 8) + +/* Used by PRM_DEBUG_TRANS_CFG */ +#define OMAP54XX_TRIGGER_CLEAR_SHIFT 2 +#define OMAP54XX_TRIGGER_CLEAR_WIDTH 0x1 +#define OMAP54XX_TRIGGER_CLEAR_MASK (1 << 2) + +/* Used by PRM_RSTST */ +#define OMAP54XX_TSHUT_CORE_RST_SHIFT 13 +#define OMAP54XX_TSHUT_CORE_RST_WIDTH 0x1 +#define OMAP54XX_TSHUT_CORE_RST_MASK (1 << 13) + +/* Used by PRM_RSTST */ +#define OMAP54XX_TSHUT_MM_RST_SHIFT 12 +#define OMAP54XX_TSHUT_MM_RST_WIDTH 0x1 +#define OMAP54XX_TSHUT_MM_RST_MASK (1 << 12) + +/* Used by PRM_RSTST */ +#define OMAP54XX_TSHUT_MPU_RST_SHIFT 11 +#define OMAP54XX_TSHUT_MPU_RST_WIDTH 0x1 +#define OMAP54XX_TSHUT_MPU_RST_MASK (1 << 11) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP54XX_VALID_SHIFT 24 +#define OMAP54XX_VALID_WIDTH 0x1 +#define OMAP54XX_VALID_MASK (1 << 24) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VC_BYPASSACK_EN_SHIFT 14 +#define OMAP54XX_VC_BYPASSACK_EN_WIDTH 0x1 +#define OMAP54XX_VC_BYPASSACK_EN_MASK (1 << 14) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VC_BYPASSACK_ST_SHIFT 14 +#define OMAP54XX_VC_BYPASSACK_ST_WIDTH 0x1 +#define OMAP54XX_VC_BYPASSACK_ST_MASK (1 << 14) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VC_CORE_VPACK_EN_SHIFT 22 +#define OMAP54XX_VC_CORE_VPACK_EN_WIDTH 0x1 +#define OMAP54XX_VC_CORE_VPACK_EN_MASK (1 << 22) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VC_CORE_VPACK_ST_SHIFT 22 +#define OMAP54XX_VC_CORE_VPACK_ST_WIDTH 0x1 +#define OMAP54XX_VC_CORE_VPACK_ST_MASK (1 << 22) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VC_MM_VPACK_EN_SHIFT 30 +#define OMAP54XX_VC_MM_VPACK_EN_WIDTH 0x1 +#define OMAP54XX_VC_MM_VPACK_EN_MASK (1 << 30) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VC_MM_VPACK_ST_SHIFT 30 +#define OMAP54XX_VC_MM_VPACK_ST_WIDTH 0x1 +#define OMAP54XX_VC_MM_VPACK_ST_MASK (1 << 30) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP54XX_VC_MPU_VPACK_EN_SHIFT 6 +#define OMAP54XX_VC_MPU_VPACK_EN_WIDTH 0x1 +#define OMAP54XX_VC_MPU_VPACK_EN_MASK (1 << 6) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP54XX_VC_MPU_VPACK_ST_SHIFT 6 +#define OMAP54XX_VC_MPU_VPACK_ST_WIDTH 0x1 +#define OMAP54XX_VC_MPU_VPACK_ST_MASK (1 << 6) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VC_RAERR_EN_SHIFT 12 +#define OMAP54XX_VC_RAERR_EN_WIDTH 0x1 +#define OMAP54XX_VC_RAERR_EN_MASK (1 << 12) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VC_RAERR_ST_SHIFT 12 +#define OMAP54XX_VC_RAERR_ST_WIDTH 0x1 +#define OMAP54XX_VC_RAERR_ST_MASK (1 << 12) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VC_SAERR_EN_SHIFT 11 +#define OMAP54XX_VC_SAERR_EN_WIDTH 0x1 +#define OMAP54XX_VC_SAERR_EN_MASK (1 << 11) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VC_SAERR_ST_SHIFT 11 +#define OMAP54XX_VC_SAERR_ST_WIDTH 0x1 +#define OMAP54XX_VC_SAERR_ST_MASK (1 << 11) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VC_TOERR_EN_SHIFT 13 +#define OMAP54XX_VC_TOERR_EN_WIDTH 0x1 +#define OMAP54XX_VC_TOERR_EN_MASK (1 << 13) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VC_TOERR_ST_SHIFT 13 +#define OMAP54XX_VC_TOERR_ST_WIDTH 0x1 +#define OMAP54XX_VC_TOERR_ST_MASK (1 << 13) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_MM_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP54XX_VDDMAX_SHIFT 24 +#define OMAP54XX_VDDMAX_WIDTH 0x8 +#define OMAP54XX_VDDMAX_MASK (0xff << 24) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_MM_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP54XX_VDDMIN_SHIFT 16 +#define OMAP54XX_VDDMIN_WIDTH 0x8 +#define OMAP54XX_VDDMIN_MASK (0xff << 16) + +/* Used by PRM_VOLTCTRL */ +#define OMAP54XX_VDD_CORE_I2C_DISABLE_SHIFT 12 +#define OMAP54XX_VDD_CORE_I2C_DISABLE_WIDTH 0x1 +#define OMAP54XX_VDD_CORE_I2C_DISABLE_MASK (1 << 12) + +/* Used by PRM_RSTST */ +#define OMAP54XX_VDD_CORE_VOLT_MGR_RST_SHIFT 8 +#define OMAP54XX_VDD_CORE_VOLT_MGR_RST_WIDTH 0x1 +#define OMAP54XX_VDD_CORE_VOLT_MGR_RST_MASK (1 << 8) + +/* Used by PRM_VOLTCTRL */ +#define OMAP54XX_VDD_MM_I2C_DISABLE_SHIFT 14 +#define OMAP54XX_VDD_MM_I2C_DISABLE_WIDTH 0x1 +#define OMAP54XX_VDD_MM_I2C_DISABLE_MASK (1 << 14) + +/* Used by PRM_VOLTCTRL */ +#define OMAP54XX_VDD_MM_PRESENCE_SHIFT 9 +#define OMAP54XX_VDD_MM_PRESENCE_WIDTH 0x1 +#define OMAP54XX_VDD_MM_PRESENCE_MASK (1 << 9) + +/* Used by PRM_RSTST */ +#define OMAP54XX_VDD_MM_VOLT_MGR_RST_SHIFT 7 +#define OMAP54XX_VDD_MM_VOLT_MGR_RST_WIDTH 0x1 +#define OMAP54XX_VDD_MM_VOLT_MGR_RST_MASK (1 << 7) + +/* Used by PRM_VOLTCTRL */ +#define OMAP54XX_VDD_MPU_I2C_DISABLE_SHIFT 13 +#define OMAP54XX_VDD_MPU_I2C_DISABLE_WIDTH 0x1 +#define OMAP54XX_VDD_MPU_I2C_DISABLE_MASK (1 << 13) + +/* Used by PRM_VOLTCTRL */ +#define OMAP54XX_VDD_MPU_PRESENCE_SHIFT 8 +#define OMAP54XX_VDD_MPU_PRESENCE_WIDTH 0x1 +#define OMAP54XX_VDD_MPU_PRESENCE_MASK (1 << 8) + +/* Used by PRM_RSTST */ +#define OMAP54XX_VDD_MPU_VOLT_MGR_RST_SHIFT 6 +#define OMAP54XX_VDD_MPU_VOLT_MGR_RST_WIDTH 0x1 +#define OMAP54XX_VDD_MPU_VOLT_MGR_RST_MASK (1 << 6) + +/* Used by PRM_VC_CORE_ERRST */ +#define OMAP54XX_VFSM_RA_ERR_CORE_SHIFT 4 +#define OMAP54XX_VFSM_RA_ERR_CORE_WIDTH 0x1 +#define OMAP54XX_VFSM_RA_ERR_CORE_MASK (1 << 4) + +/* Used by PRM_VC_MM_ERRST */ +#define OMAP54XX_VFSM_RA_ERR_MM_SHIFT 4 +#define OMAP54XX_VFSM_RA_ERR_MM_WIDTH 0x1 +#define OMAP54XX_VFSM_RA_ERR_MM_MASK (1 << 4) + +/* Used by PRM_VC_MPU_ERRST */ +#define OMAP54XX_VFSM_RA_ERR_MPU_SHIFT 4 +#define OMAP54XX_VFSM_RA_ERR_MPU_WIDTH 0x1 +#define OMAP54XX_VFSM_RA_ERR_MPU_MASK (1 << 4) + +/* Used by PRM_VC_CORE_ERRST */ +#define OMAP54XX_VFSM_SA_ERR_CORE_SHIFT 3 +#define OMAP54XX_VFSM_SA_ERR_CORE_WIDTH 0x1 +#define OMAP54XX_VFSM_SA_ERR_CORE_MASK (1 << 3) + +/* Used by PRM_VC_MM_ERRST */ +#define OMAP54XX_VFSM_SA_ERR_MM_SHIFT 3 +#define OMAP54XX_VFSM_SA_ERR_MM_WIDTH 0x1 +#define OMAP54XX_VFSM_SA_ERR_MM_MASK (1 << 3) + +/* Used by PRM_VC_MPU_ERRST */ +#define OMAP54XX_VFSM_SA_ERR_MPU_SHIFT 3 +#define OMAP54XX_VFSM_SA_ERR_MPU_WIDTH 0x1 +#define OMAP54XX_VFSM_SA_ERR_MPU_MASK (1 << 3) + +/* Used by PRM_VC_CORE_ERRST */ +#define OMAP54XX_VFSM_TIMEOUT_ERR_CORE_SHIFT 5 +#define OMAP54XX_VFSM_TIMEOUT_ERR_CORE_WIDTH 0x1 +#define OMAP54XX_VFSM_TIMEOUT_ERR_CORE_MASK (1 << 5) + +/* Used by PRM_VC_MM_ERRST */ +#define OMAP54XX_VFSM_TIMEOUT_ERR_MM_SHIFT 5 +#define OMAP54XX_VFSM_TIMEOUT_ERR_MM_WIDTH 0x1 +#define OMAP54XX_VFSM_TIMEOUT_ERR_MM_MASK (1 << 5) + +/* Used by PRM_VC_MPU_ERRST */ +#define OMAP54XX_VFSM_TIMEOUT_ERR_MPU_SHIFT 5 +#define OMAP54XX_VFSM_TIMEOUT_ERR_MPU_WIDTH 0x1 +#define OMAP54XX_VFSM_TIMEOUT_ERR_MPU_MASK (1 << 5) + +/* Used by PRM_VC_SMPS_CORE_CONFIG */ +#define OMAP54XX_VOLRA_VDD_CORE_L_SHIFT 8 +#define OMAP54XX_VOLRA_VDD_CORE_L_WIDTH 0x8 +#define OMAP54XX_VOLRA_VDD_CORE_L_MASK (0xff << 8) + +/* Used by PRM_VC_SMPS_MM_CONFIG */ +#define OMAP54XX_VOLRA_VDD_MM_L_SHIFT 8 +#define OMAP54XX_VOLRA_VDD_MM_L_WIDTH 0x8 +#define OMAP54XX_VOLRA_VDD_MM_L_MASK (0xff << 8) + +/* Used by PRM_VC_SMPS_MPU_CONFIG */ +#define OMAP54XX_VOLRA_VDD_MPU_L_SHIFT 8 +#define OMAP54XX_VOLRA_VDD_MPU_L_WIDTH 0x8 +#define OMAP54XX_VOLRA_VDD_MPU_L_MASK (0xff << 8) + +/* Used by PRM_VOLTST_MM, PRM_VOLTST_MPU */ +#define OMAP54XX_VOLTSTATEST_SHIFT 0 +#define OMAP54XX_VOLTSTATEST_WIDTH 0x2 +#define OMAP54XX_VOLTSTATEST_MASK (0x3 << 0) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP54XX_VPENABLE_SHIFT 0 +#define OMAP54XX_VPENABLE_WIDTH 0x1 +#define OMAP54XX_VPENABLE_MASK (1 << 0) + +/* Used by PRM_VP_CORE_STATUS, PRM_VP_MM_STATUS, PRM_VP_MPU_STATUS */ +#define OMAP54XX_VPINIDLE_SHIFT 0 +#define OMAP54XX_VPINIDLE_WIDTH 0x1 +#define OMAP54XX_VPINIDLE_MASK (1 << 0) + +/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_MM_VOLTAGE, PRM_VP_MPU_VOLTAGE */ +#define OMAP54XX_VPVOLTAGE_SHIFT 0 +#define OMAP54XX_VPVOLTAGE_WIDTH 0x8 +#define OMAP54XX_VPVOLTAGE_MASK (0xff << 0) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_CORE_EQVALUE_EN_SHIFT 20 +#define OMAP54XX_VP_CORE_EQVALUE_EN_WIDTH 0x1 +#define OMAP54XX_VP_CORE_EQVALUE_EN_MASK (1 << 20) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_CORE_EQVALUE_ST_SHIFT 20 +#define OMAP54XX_VP_CORE_EQVALUE_ST_WIDTH 0x1 +#define OMAP54XX_VP_CORE_EQVALUE_ST_MASK (1 << 20) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_CORE_MAXVDD_EN_SHIFT 18 +#define OMAP54XX_VP_CORE_MAXVDD_EN_WIDTH 0x1 +#define OMAP54XX_VP_CORE_MAXVDD_EN_MASK (1 << 18) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_CORE_MAXVDD_ST_SHIFT 18 +#define OMAP54XX_VP_CORE_MAXVDD_ST_WIDTH 0x1 +#define OMAP54XX_VP_CORE_MAXVDD_ST_MASK (1 << 18) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_CORE_MINVDD_EN_SHIFT 17 +#define OMAP54XX_VP_CORE_MINVDD_EN_WIDTH 0x1 +#define OMAP54XX_VP_CORE_MINVDD_EN_MASK (1 << 17) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_CORE_MINVDD_ST_SHIFT 17 +#define OMAP54XX_VP_CORE_MINVDD_ST_WIDTH 0x1 +#define OMAP54XX_VP_CORE_MINVDD_ST_MASK (1 << 17) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_CORE_NOSMPSACK_EN_SHIFT 19 +#define OMAP54XX_VP_CORE_NOSMPSACK_EN_WIDTH 0x1 +#define OMAP54XX_VP_CORE_NOSMPSACK_EN_MASK (1 << 19) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_CORE_NOSMPSACK_ST_SHIFT 19 +#define OMAP54XX_VP_CORE_NOSMPSACK_ST_WIDTH 0x1 +#define OMAP54XX_VP_CORE_NOSMPSACK_ST_MASK (1 << 19) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_CORE_OPPCHANGEDONE_EN_SHIFT 16 +#define OMAP54XX_VP_CORE_OPPCHANGEDONE_EN_WIDTH 0x1 +#define OMAP54XX_VP_CORE_OPPCHANGEDONE_EN_MASK (1 << 16) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_CORE_OPPCHANGEDONE_ST_SHIFT 16 +#define OMAP54XX_VP_CORE_OPPCHANGEDONE_ST_WIDTH 0x1 +#define OMAP54XX_VP_CORE_OPPCHANGEDONE_ST_MASK (1 << 16) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_CORE_TRANXDONE_EN_SHIFT 21 +#define OMAP54XX_VP_CORE_TRANXDONE_EN_WIDTH 0x1 +#define OMAP54XX_VP_CORE_TRANXDONE_EN_MASK (1 << 21) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_CORE_TRANXDONE_ST_SHIFT 21 +#define OMAP54XX_VP_CORE_TRANXDONE_ST_WIDTH 0x1 +#define OMAP54XX_VP_CORE_TRANXDONE_ST_MASK (1 << 21) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_MM_EQVALUE_EN_SHIFT 28 +#define OMAP54XX_VP_MM_EQVALUE_EN_WIDTH 0x1 +#define OMAP54XX_VP_MM_EQVALUE_EN_MASK (1 << 28) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_MM_EQVALUE_ST_SHIFT 28 +#define OMAP54XX_VP_MM_EQVALUE_ST_WIDTH 0x1 +#define OMAP54XX_VP_MM_EQVALUE_ST_MASK (1 << 28) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_MM_MAXVDD_EN_SHIFT 26 +#define OMAP54XX_VP_MM_MAXVDD_EN_WIDTH 0x1 +#define OMAP54XX_VP_MM_MAXVDD_EN_MASK (1 << 26) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_MM_MAXVDD_ST_SHIFT 26 +#define OMAP54XX_VP_MM_MAXVDD_ST_WIDTH 0x1 +#define OMAP54XX_VP_MM_MAXVDD_ST_MASK (1 << 26) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_MM_MINVDD_EN_SHIFT 25 +#define OMAP54XX_VP_MM_MINVDD_EN_WIDTH 0x1 +#define OMAP54XX_VP_MM_MINVDD_EN_MASK (1 << 25) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_MM_MINVDD_ST_SHIFT 25 +#define OMAP54XX_VP_MM_MINVDD_ST_WIDTH 0x1 +#define OMAP54XX_VP_MM_MINVDD_ST_MASK (1 << 25) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_MM_NOSMPSACK_EN_SHIFT 27 +#define OMAP54XX_VP_MM_NOSMPSACK_EN_WIDTH 0x1 +#define OMAP54XX_VP_MM_NOSMPSACK_EN_MASK (1 << 27) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_MM_NOSMPSACK_ST_SHIFT 27 +#define OMAP54XX_VP_MM_NOSMPSACK_ST_WIDTH 0x1 +#define OMAP54XX_VP_MM_NOSMPSACK_ST_MASK (1 << 27) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_MM_OPPCHANGEDONE_EN_SHIFT 24 +#define OMAP54XX_VP_MM_OPPCHANGEDONE_EN_WIDTH 0x1 +#define OMAP54XX_VP_MM_OPPCHANGEDONE_EN_MASK (1 << 24) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_MM_OPPCHANGEDONE_ST_SHIFT 24 +#define OMAP54XX_VP_MM_OPPCHANGEDONE_ST_WIDTH 0x1 +#define OMAP54XX_VP_MM_OPPCHANGEDONE_ST_MASK (1 << 24) + +/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */ +#define OMAP54XX_VP_MM_TRANXDONE_EN_SHIFT 29 +#define OMAP54XX_VP_MM_TRANXDONE_EN_WIDTH 0x1 +#define OMAP54XX_VP_MM_TRANXDONE_EN_MASK (1 << 29) + +/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */ +#define OMAP54XX_VP_MM_TRANXDONE_ST_SHIFT 29 +#define OMAP54XX_VP_MM_TRANXDONE_ST_WIDTH 0x1 +#define OMAP54XX_VP_MM_TRANXDONE_ST_MASK (1 << 29) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP54XX_VP_MPU_EQVALUE_EN_SHIFT 4 +#define OMAP54XX_VP_MPU_EQVALUE_EN_WIDTH 0x1 +#define OMAP54XX_VP_MPU_EQVALUE_EN_MASK (1 << 4) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP54XX_VP_MPU_EQVALUE_ST_SHIFT 4 +#define OMAP54XX_VP_MPU_EQVALUE_ST_WIDTH 0x1 +#define OMAP54XX_VP_MPU_EQVALUE_ST_MASK (1 << 4) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP54XX_VP_MPU_MAXVDD_EN_SHIFT 2 +#define OMAP54XX_VP_MPU_MAXVDD_EN_WIDTH 0x1 +#define OMAP54XX_VP_MPU_MAXVDD_EN_MASK (1 << 2) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP54XX_VP_MPU_MAXVDD_ST_SHIFT 2 +#define OMAP54XX_VP_MPU_MAXVDD_ST_WIDTH 0x1 +#define OMAP54XX_VP_MPU_MAXVDD_ST_MASK (1 << 2) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP54XX_VP_MPU_MINVDD_EN_SHIFT 1 +#define OMAP54XX_VP_MPU_MINVDD_EN_WIDTH 0x1 +#define OMAP54XX_VP_MPU_MINVDD_EN_MASK (1 << 1) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP54XX_VP_MPU_MINVDD_ST_SHIFT 1 +#define OMAP54XX_VP_MPU_MINVDD_ST_WIDTH 0x1 +#define OMAP54XX_VP_MPU_MINVDD_ST_MASK (1 << 1) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP54XX_VP_MPU_NOSMPSACK_EN_SHIFT 3 +#define OMAP54XX_VP_MPU_NOSMPSACK_EN_WIDTH 0x1 +#define OMAP54XX_VP_MPU_NOSMPSACK_EN_MASK (1 << 3) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP54XX_VP_MPU_NOSMPSACK_ST_SHIFT 3 +#define OMAP54XX_VP_MPU_NOSMPSACK_ST_WIDTH 0x1 +#define OMAP54XX_VP_MPU_NOSMPSACK_ST_MASK (1 << 3) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP54XX_VP_MPU_OPPCHANGEDONE_EN_SHIFT 0 +#define OMAP54XX_VP_MPU_OPPCHANGEDONE_EN_WIDTH 0x1 +#define OMAP54XX_VP_MPU_OPPCHANGEDONE_EN_MASK (1 << 0) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP54XX_VP_MPU_OPPCHANGEDONE_ST_SHIFT 0 +#define OMAP54XX_VP_MPU_OPPCHANGEDONE_ST_WIDTH 0x1 +#define OMAP54XX_VP_MPU_OPPCHANGEDONE_ST_MASK (1 << 0) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP54XX_VP_MPU_TRANXDONE_EN_SHIFT 5 +#define OMAP54XX_VP_MPU_TRANXDONE_EN_WIDTH 0x1 +#define OMAP54XX_VP_MPU_TRANXDONE_EN_MASK (1 << 5) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP54XX_VP_MPU_TRANXDONE_ST_SHIFT 5 +#define OMAP54XX_VP_MPU_TRANXDONE_ST_WIDTH 0x1 +#define OMAP54XX_VP_MPU_TRANXDONE_ST_MASK (1 << 5) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP54XX_VSETUPCNT_VALUE_SHIFT 8 +#define OMAP54XX_VSETUPCNT_VALUE_WIDTH 0x8 +#define OMAP54XX_VSETUPCNT_VALUE_MASK (0xff << 8) + +/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_MM_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */ +#define OMAP54XX_VSTEPMAX_SHIFT 0 +#define OMAP54XX_VSTEPMAX_WIDTH 0x8 +#define OMAP54XX_VSTEPMAX_MASK (0xff << 0) + +/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_MM_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */ +#define OMAP54XX_VSTEPMIN_SHIFT 0 +#define OMAP54XX_VSTEPMIN_WIDTH 0x8 +#define OMAP54XX_VSTEPMIN_MASK (0xff << 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DISPC_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_DISPC_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DISPC_DSP_MASK (1 << 2) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DISPC_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_DISPC_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DISPC_IPU_MASK (1 << 1) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DISPC_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_DISPC_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DISPC_MPU_MASK (1 << 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DISPC_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_DISPC_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DISPC_SDMA_MASK (1 << 3) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP54XX_WKUPDEP_DMIC_DMA_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_DMIC_DMA_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DMIC_DMA_DSP_MASK (1 << 6) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP54XX_WKUPDEP_DMIC_DMA_SDMA_SHIFT 7 +#define OMAP54XX_WKUPDEP_DMIC_DMA_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DMIC_DMA_SDMA_MASK (1 << 7) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP54XX_WKUPDEP_DMIC_IRQ_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_DMIC_IRQ_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DMIC_IRQ_DSP_MASK (1 << 2) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP54XX_WKUPDEP_DMIC_IRQ_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_DMIC_IRQ_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DMIC_IRQ_MPU_MASK (1 << 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_A_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_DSI1_A_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_A_DSP_MASK (1 << 6) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_A_IPU_SHIFT 5 +#define OMAP54XX_WKUPDEP_DSI1_A_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_A_IPU_MASK (1 << 5) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_A_MPU_SHIFT 4 +#define OMAP54XX_WKUPDEP_DSI1_A_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_A_MPU_MASK (1 << 4) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_A_SDMA_SHIFT 7 +#define OMAP54XX_WKUPDEP_DSI1_A_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_A_SDMA_MASK (1 << 7) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_B_DSP_SHIFT 10 +#define OMAP54XX_WKUPDEP_DSI1_B_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_B_DSP_MASK (1 << 10) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_B_IPU_SHIFT 9 +#define OMAP54XX_WKUPDEP_DSI1_B_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_B_IPU_MASK (1 << 9) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_B_MPU_SHIFT 8 +#define OMAP54XX_WKUPDEP_DSI1_B_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_B_MPU_MASK (1 << 8) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_B_SDMA_SHIFT 11 +#define OMAP54XX_WKUPDEP_DSI1_B_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_B_SDMA_MASK (1 << 11) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_C_DSP_SHIFT 17 +#define OMAP54XX_WKUPDEP_DSI1_C_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_C_DSP_MASK (1 << 17) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_C_IPU_SHIFT 16 +#define OMAP54XX_WKUPDEP_DSI1_C_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_C_IPU_MASK (1 << 16) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_C_MPU_SHIFT 15 +#define OMAP54XX_WKUPDEP_DSI1_C_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_C_MPU_MASK (1 << 15) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_DSI1_C_SDMA_SHIFT 18 +#define OMAP54XX_WKUPDEP_DSI1_C_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_DSI1_C_SDMA_MASK (1 << 18) + +/* Used by PM_WKUPAON_GPIO1_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_IPU_MASK (1 << 1) + +/* Used by PM_WKUPAON_GPIO1_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_MPU_MASK (1 << 0) + +/* Used by PM_WKUPAON_GPIO1_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO1_IRQ2_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_GPIO1_IRQ2_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO1_IRQ2_DSP_MASK (1 << 6) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO2_IRQ2_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_GPIO2_IRQ2_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO2_IRQ2_DSP_MASK (1 << 6) + +/* Used by PM_L4PER_GPIO3_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_GPIO3_IRQ1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO3_IRQ1_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_GPIO3_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO3_IRQ2_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_GPIO3_IRQ2_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO3_IRQ2_DSP_MASK (1 << 6) + +/* Used by PM_L4PER_GPIO4_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_GPIO4_IRQ1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO4_IRQ1_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_GPIO4_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO4_IRQ2_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_GPIO4_IRQ2_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO4_IRQ2_DSP_MASK (1 << 6) + +/* Used by PM_L4PER_GPIO5_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_GPIO5_IRQ1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO5_IRQ1_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_GPIO5_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO5_IRQ2_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_GPIO5_IRQ2_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO5_IRQ2_DSP_MASK (1 << 6) + +/* Used by PM_L4PER_GPIO6_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_GPIO6_IRQ1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO6_IRQ1_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_GPIO6_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO6_IRQ2_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_GPIO6_IRQ2_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO6_IRQ2_DSP_MASK (1 << 6) + +/* Used by PM_L4PER_GPIO7_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO7_IRQ1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_GPIO7_IRQ1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO7_IRQ1_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_GPIO8_WKDEP */ +#define OMAP54XX_WKUPDEP_GPIO8_IRQ1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_GPIO8_IRQ1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_GPIO8_IRQ1_MPU_MASK (1 << 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_HDMIDMA_SDMA_SHIFT 19 +#define OMAP54XX_WKUPDEP_HDMIDMA_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_HDMIDMA_SDMA_MASK (1 << 19) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_HDMIIRQ_DSP_SHIFT 14 +#define OMAP54XX_WKUPDEP_HDMIIRQ_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_HDMIIRQ_DSP_MASK (1 << 14) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_HDMIIRQ_IPU_SHIFT 13 +#define OMAP54XX_WKUPDEP_HDMIIRQ_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_HDMIIRQ_IPU_MASK (1 << 13) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP54XX_WKUPDEP_HDMIIRQ_MPU_SHIFT 12 +#define OMAP54XX_WKUPDEP_HDMIIRQ_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_HDMIIRQ_MPU_MASK (1 << 12) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP54XX_WKUPDEP_HSI_DSP_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_HSI_DSP_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_HSI_DSP_DSP_MASK (1 << 6) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP54XX_WKUPDEP_HSI_MCU_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_HSI_MCU_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_HSI_MCU_IPU_MASK (1 << 1) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP54XX_WKUPDEP_HSI_MCU_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_HSI_MCU_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_HSI_MCU_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C1_DMA_SDMA_SHIFT 7 +#define OMAP54XX_WKUPDEP_I2C1_DMA_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C1_DMA_SDMA_MASK (1 << 7) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C1_IRQ_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_I2C1_IRQ_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C1_IRQ_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C1_IRQ_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_I2C1_IRQ_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C1_IRQ_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C2_DMA_SDMA_SHIFT 7 +#define OMAP54XX_WKUPDEP_I2C2_DMA_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C2_DMA_SDMA_MASK (1 << 7) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C2_IRQ_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_I2C2_IRQ_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C2_IRQ_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C2_IRQ_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_I2C2_IRQ_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C2_IRQ_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C3_DMA_SDMA_SHIFT 7 +#define OMAP54XX_WKUPDEP_I2C3_DMA_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C3_DMA_SDMA_MASK (1 << 7) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C3_IRQ_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_I2C3_IRQ_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C3_IRQ_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C3_IRQ_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_I2C3_IRQ_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C3_IRQ_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C4_DMA_SDMA_SHIFT 7 +#define OMAP54XX_WKUPDEP_I2C4_DMA_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C4_DMA_SDMA_MASK (1 << 7) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C4_IRQ_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_I2C4_IRQ_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C4_IRQ_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C4_IRQ_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_I2C4_IRQ_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C4_IRQ_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_I2C5_WKDEP */ +#define OMAP54XX_WKUPDEP_I2C5_IRQ_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_I2C5_IRQ_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_I2C5_IRQ_MPU_MASK (1 << 0) + +/* Used by PM_WKUPAON_KBD_WKDEP */ +#define OMAP54XX_WKUPDEP_KBD_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_KBD_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_KBD_MPU_MASK (1 << 0) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP54XX_WKUPDEP_MCASP_DMA_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_MCASP_DMA_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCASP_DMA_DSP_MASK (1 << 6) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP54XX_WKUPDEP_MCASP_DMA_SDMA_SHIFT 7 +#define OMAP54XX_WKUPDEP_MCASP_DMA_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCASP_DMA_SDMA_MASK (1 << 7) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP54XX_WKUPDEP_MCASP_IRQ_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_MCASP_IRQ_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCASP_IRQ_DSP_MASK (1 << 2) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP54XX_WKUPDEP_MCASP_IRQ_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MCASP_IRQ_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCASP_IRQ_MPU_MASK (1 << 0) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP54XX_WKUPDEP_MCBSP1_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_MCBSP1_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCBSP1_DSP_MASK (1 << 2) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP54XX_WKUPDEP_MCBSP1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MCBSP1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCBSP1_MPU_MASK (1 << 0) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP54XX_WKUPDEP_MCBSP1_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MCBSP1_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCBSP1_SDMA_MASK (1 << 3) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP54XX_WKUPDEP_MCBSP2_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_MCBSP2_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCBSP2_DSP_MASK (1 << 2) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP54XX_WKUPDEP_MCBSP2_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MCBSP2_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCBSP2_MPU_MASK (1 << 0) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP54XX_WKUPDEP_MCBSP2_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MCBSP2_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCBSP2_SDMA_MASK (1 << 3) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP54XX_WKUPDEP_MCBSP3_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_MCBSP3_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCBSP3_DSP_MASK (1 << 2) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP54XX_WKUPDEP_MCBSP3_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MCBSP3_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCBSP3_MPU_MASK (1 << 0) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP54XX_WKUPDEP_MCBSP3_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MCBSP3_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCBSP3_SDMA_MASK (1 << 3) + +/* Used by PM_ABE_MCPDM_WKDEP */ +#define OMAP54XX_WKUPDEP_MCPDM_DMA_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_MCPDM_DMA_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCPDM_DMA_DSP_MASK (1 << 6) + +/* Used by PM_ABE_MCPDM_WKDEP */ +#define OMAP54XX_WKUPDEP_MCPDM_DMA_SDMA_SHIFT 7 +#define OMAP54XX_WKUPDEP_MCPDM_DMA_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCPDM_DMA_SDMA_MASK (1 << 7) + +/* Used by PM_ABE_MCPDM_WKDEP */ +#define OMAP54XX_WKUPDEP_MCPDM_IRQ_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_MCPDM_IRQ_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCPDM_IRQ_DSP_MASK (1 << 2) + +/* Used by PM_ABE_MCPDM_WKDEP */ +#define OMAP54XX_WKUPDEP_MCPDM_IRQ_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MCPDM_IRQ_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCPDM_IRQ_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI1_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_MCSPI1_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI1_DSP_MASK (1 << 2) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI1_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_MCSPI1_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI1_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MCSPI1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI1_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI1_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MCSPI1_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI1_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI2_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_MCSPI2_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI2_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI2_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MCSPI2_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI2_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI2_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MCSPI2_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI2_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_MCSPI3_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI3_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MCSPI3_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI3_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_MCSPI3_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI3_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MCSPI3_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI3_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_MCSPI4_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI4_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MCSPI4_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI4_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_MCSPI4_WKDEP */ +#define OMAP54XX_WKUPDEP_MCSPI4_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MCSPI4_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MCSPI4_SDMA_MASK (1 << 3) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC1_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_MMC1_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC1_DSP_MASK (1 << 2) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC1_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_MMC1_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC1_IPU_MASK (1 << 1) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MMC1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC1_MPU_MASK (1 << 0) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC1_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MMC1_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC1_SDMA_MASK (1 << 3) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC2_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_MMC2_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC2_DSP_MASK (1 << 2) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC2_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_MMC2_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC2_IPU_MASK (1 << 1) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC2_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MMC2_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC2_MPU_MASK (1 << 0) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC2_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MMC2_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC2_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_MMC3_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC3_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_MMC3_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC3_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_MMC3_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC3_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MMC3_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC3_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_MMC3_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC3_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MMC3_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC3_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_MMC4_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC4_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MMC4_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC4_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_MMC4_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC4_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MMC4_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC4_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_MMC5_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC5_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_MMC5_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC5_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_MMC5_WKDEP */ +#define OMAP54XX_WKUPDEP_MMC5_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_MMC5_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_MMC5_SDMA_MASK (1 << 3) + +/* Used by PM_L3INIT_SATA_WKDEP */ +#define OMAP54XX_WKUPDEP_SATA_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_SATA_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_SATA_MPU_MASK (1 << 0) + +/* Used by PM_ABE_SLIMBUS1_WKDEP */ +#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_DSP_SHIFT 6 +#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_DSP_MASK (1 << 6) + +/* Used by PM_ABE_SLIMBUS1_WKDEP */ +#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT 7 +#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK (1 << 7) + +/* Used by PM_ABE_SLIMBUS1_WKDEP */ +#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_DSP_MASK (1 << 2) + +/* Used by PM_ABE_SLIMBUS1_WKDEP */ +#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK (1 << 0) + +/* Used by PM_COREAON_SMARTREFLEX_CORE_WKDEP */ +#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_IPU_MASK (1 << 1) + +/* Used by PM_COREAON_SMARTREFLEX_CORE_WKDEP */ +#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_MPU_MASK (1 << 0) + +/* Used by PM_COREAON_SMARTREFLEX_MM_WKDEP */ +#define OMAP54XX_WKUPDEP_SMARTREFLEX_MM_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_SMARTREFLEX_MM_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_SMARTREFLEX_MM_MPU_MASK (1 << 0) + +/* Used by PM_COREAON_SMARTREFLEX_MPU_WKDEP */ +#define OMAP54XX_WKUPDEP_SMARTREFLEX_MPU_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_SMARTREFLEX_MPU_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_SMARTREFLEX_MPU_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_TIMER10_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER10_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER10_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER10_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_TIMER11_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER11_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_TIMER11_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER11_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_TIMER11_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER11_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER11_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER11_MPU_MASK (1 << 0) + +/* Used by PM_WKUPAON_TIMER12_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER12_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER12_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER12_MPU_MASK (1 << 0) + +/* Used by PM_WKUPAON_TIMER1_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER1_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_TIMER2_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER2_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER2_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER2_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_TIMER3_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER3_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_TIMER3_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER3_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_TIMER3_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER3_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER3_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER3_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_TIMER4_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER4_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_TIMER4_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER4_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_TIMER4_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER4_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER4_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER4_MPU_MASK (1 << 0) + +/* Used by PM_ABE_TIMER5_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER5_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_TIMER5_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER5_DSP_MASK (1 << 2) + +/* Used by PM_ABE_TIMER5_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER5_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER5_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER5_MPU_MASK (1 << 0) + +/* Used by PM_ABE_TIMER6_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER6_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_TIMER6_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER6_DSP_MASK (1 << 2) + +/* Used by PM_ABE_TIMER6_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER6_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER6_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER6_MPU_MASK (1 << 0) + +/* Used by PM_ABE_TIMER7_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER7_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_TIMER7_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER7_DSP_MASK (1 << 2) + +/* Used by PM_ABE_TIMER7_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER7_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER7_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER7_MPU_MASK (1 << 0) + +/* Used by PM_ABE_TIMER8_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER8_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_TIMER8_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER8_DSP_MASK (1 << 2) + +/* Used by PM_ABE_TIMER8_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER8_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER8_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER8_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_TIMER9_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER9_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_TIMER9_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER9_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_TIMER9_WKDEP */ +#define OMAP54XX_WKUPDEP_TIMER9_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_TIMER9_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_TIMER9_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_UART1_WKDEP */ +#define OMAP54XX_WKUPDEP_UART1_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_UART1_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART1_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_UART1_WKDEP */ +#define OMAP54XX_WKUPDEP_UART1_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_UART1_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART1_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_UART2_WKDEP */ +#define OMAP54XX_WKUPDEP_UART2_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_UART2_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART2_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_UART2_WKDEP */ +#define OMAP54XX_WKUPDEP_UART2_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_UART2_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART2_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP54XX_WKUPDEP_UART3_DSP_SHIFT 2 +#define OMAP54XX_WKUPDEP_UART3_DSP_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART3_DSP_MASK (1 << 2) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP54XX_WKUPDEP_UART3_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_UART3_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART3_IPU_MASK (1 << 1) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP54XX_WKUPDEP_UART3_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_UART3_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART3_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP54XX_WKUPDEP_UART3_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_UART3_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART3_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_UART4_WKDEP */ +#define OMAP54XX_WKUPDEP_UART4_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_UART4_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART4_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_UART4_WKDEP */ +#define OMAP54XX_WKUPDEP_UART4_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_UART4_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART4_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_UART5_WKDEP */ +#define OMAP54XX_WKUPDEP_UART5_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_UART5_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART5_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_UART5_WKDEP */ +#define OMAP54XX_WKUPDEP_UART5_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_UART5_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART5_SDMA_MASK (1 << 3) + +/* Used by PM_L4PER_UART6_WKDEP */ +#define OMAP54XX_WKUPDEP_UART6_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_UART6_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART6_MPU_MASK (1 << 0) + +/* Used by PM_L4PER_UART6_WKDEP */ +#define OMAP54XX_WKUPDEP_UART6_SDMA_SHIFT 3 +#define OMAP54XX_WKUPDEP_UART6_SDMA_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UART6_SDMA_MASK (1 << 3) + +/* Used by PM_L3INIT_UNIPRO2_WKDEP */ +#define OMAP54XX_WKUPDEP_UNIPRO2_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_UNIPRO2_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_UNIPRO2_MPU_MASK (1 << 0) + +/* Used by PM_L3INIT_USB_HOST_HS_WKDEP */ +#define OMAP54XX_WKUPDEP_USB_HOST_HS_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_USB_HOST_HS_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_USB_HOST_HS_IPU_MASK (1 << 1) + +/* Used by PM_L3INIT_USB_HOST_HS_WKDEP */ +#define OMAP54XX_WKUPDEP_USB_HOST_HS_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_USB_HOST_HS_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_USB_HOST_HS_MPU_MASK (1 << 0) + +/* Used by PM_L3INIT_USB_OTG_SS_WKDEP */ +#define OMAP54XX_WKUPDEP_USB_OTG_SS_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_USB_OTG_SS_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_USB_OTG_SS_IPU_MASK (1 << 1) + +/* Used by PM_L3INIT_USB_OTG_SS_WKDEP */ +#define OMAP54XX_WKUPDEP_USB_OTG_SS_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_USB_OTG_SS_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_USB_OTG_SS_MPU_MASK (1 << 0) + +/* Used by PM_L3INIT_USB_TLL_HS_WKDEP */ +#define OMAP54XX_WKUPDEP_USB_TLL_HS_IPU_SHIFT 1 +#define OMAP54XX_WKUPDEP_USB_TLL_HS_IPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_USB_TLL_HS_IPU_MASK (1 << 1) + +/* Used by PM_L3INIT_USB_TLL_HS_WKDEP */ +#define OMAP54XX_WKUPDEP_USB_TLL_HS_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_USB_TLL_HS_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_USB_TLL_HS_MPU_MASK (1 << 0) + +/* Used by PM_WKUPAON_WD_TIMER2_WKDEP */ +#define OMAP54XX_WKUPDEP_WD_TIMER2_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_WD_TIMER2_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_WD_TIMER2_MPU_MASK (1 << 0) + +/* Used by PM_ABE_WD_TIMER3_WKDEP */ +#define OMAP54XX_WKUPDEP_WD_TIMER3_MPU_SHIFT 0 +#define OMAP54XX_WKUPDEP_WD_TIMER3_MPU_WIDTH 0x1 +#define OMAP54XX_WKUPDEP_WD_TIMER3_MPU_MASK (1 << 0) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP54XX_WUCLK_CTRL_SHIFT 8 +#define OMAP54XX_WUCLK_CTRL_WIDTH 0x1 +#define OMAP54XX_WUCLK_CTRL_MASK (1 << 8) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP54XX_WUCLK_STATUS_SHIFT 9 +#define OMAP54XX_WUCLK_STATUS_WIDTH 0x1 +#define OMAP54XX_WUCLK_STATUS_MASK (1 << 9) + +/* Used by REVISION_PRM */ +#define OMAP54XX_X_MAJOR_SHIFT 8 +#define OMAP54XX_X_MAJOR_WIDTH 0x3 +#define OMAP54XX_X_MAJOR_MASK (0x7 << 8) + +/* Used by REVISION_PRM */ +#define OMAP54XX_Y_MINOR_SHIFT 0 +#define OMAP54XX_Y_MINOR_WIDTH 0x6 +#define OMAP54XX_Y_MINOR_MASK (0x3f << 0) +#endif diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 8ee1fbdec56..7db2422faa1 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -25,6 +25,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_H #define __ARCH_ARM_MACH_OMAP2_PRM44XX_H +#include "prm44xx_54xx.h" #include "prcm-common.h" #include "prm.h" @@ -744,36 +745,4 @@ #define OMAP4_PRM_VC_ERRST_OFFSET 0x00f8 #define OMAP4430_PRM_VC_ERRST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f8) -/* Function prototypes */ -# ifndef __ASSEMBLER__ - -extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx); -extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx); -extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); - -/* OMAP4-specific VP functions */ -u32 omap4_prm_vp_check_txdone(u8 vp_id); -void omap4_prm_vp_clear_txdone(u8 vp_id); - -/* - * OMAP4 access functions for voltage controller (VC) and - * voltage proccessor (VP) in the PRM. - */ -extern u32 omap4_prm_vcvp_read(u8 offset); -extern void omap4_prm_vcvp_write(u32 val, u8 offset); -extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); - -extern void omap44xx_prm_reconfigure_io_chain(void); - -/* PRM interrupt-related functions */ -extern void omap44xx_prm_read_pending_irqs(unsigned long *events); -extern void omap44xx_prm_ocp_barrier(void); -extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask); -extern void omap44xx_prm_restore_irqen(u32 *saved_mask); - -extern int __init omap44xx_prm_init(void); -extern u32 omap44xx_prm_get_reset_sources(void); - -# endif - #endif diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h new file mode 100644 index 00000000000..7cd22abb8f1 --- /dev/null +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -0,0 +1,58 @@ +/* + * OMAP44xx and 54xx PRM common functions + * + * Copyright (C) 2009-2013 Texas Instruments, Inc. + * Copyright (C) 2009-2010 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H + +/* Function prototypes */ +#ifndef __ASSEMBLER__ + +extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx); +extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx); +extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); + +/* OMAP4/OMAP5-specific VP functions */ +u32 omap4_prm_vp_check_txdone(u8 vp_id); +void omap4_prm_vp_clear_txdone(u8 vp_id); + +/* + * OMAP4/OMAP5 access functions for voltage controller (VC) and + * voltage proccessor (VP) in the PRM. + */ +extern u32 omap4_prm_vcvp_read(u8 offset); +extern void omap4_prm_vcvp_write(u32 val, u8 offset); +extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); + +extern void omap44xx_prm_reconfigure_io_chain(void); + +/* PRM interrupt-related functions */ +extern void omap44xx_prm_read_pending_irqs(unsigned long *events); +extern void omap44xx_prm_ocp_barrier(void); +extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask); +extern void omap44xx_prm_restore_irqen(u32 *saved_mask); + +extern int __init omap44xx_prm_init(void); +extern u32 omap44xx_prm_get_reset_sources(void); + +#endif + +#endif diff --git a/arch/arm/mach-omap2/prm54xx.h b/arch/arm/mach-omap2/prm54xx.h new file mode 100644 index 00000000000..e4411010309 --- /dev/null +++ b/arch/arm/mach-omap2/prm54xx.h @@ -0,0 +1,421 @@ +/* + * OMAP54xx PRM instance offset macros + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM54XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM54XX_H + +#include "prm44xx_54xx.h" +#include "prcm-common.h" +#include "prm.h" + +#define OMAP54XX_PRM_BASE 0x4ae06000 + +#define OMAP54XX_PRM_REGADDR(inst, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE + (inst) + (reg)) + + +/* PRM instances */ +#define OMAP54XX_PRM_OCP_SOCKET_INST 0x0000 +#define OMAP54XX_PRM_CKGEN_INST 0x0100 +#define OMAP54XX_PRM_MPU_INST 0x0300 +#define OMAP54XX_PRM_DSP_INST 0x0400 +#define OMAP54XX_PRM_ABE_INST 0x0500 +#define OMAP54XX_PRM_COREAON_INST 0x0600 +#define OMAP54XX_PRM_CORE_INST 0x0700 +#define OMAP54XX_PRM_IVA_INST 0x1200 +#define OMAP54XX_PRM_CAM_INST 0x1300 +#define OMAP54XX_PRM_DSS_INST 0x1400 +#define OMAP54XX_PRM_GPU_INST 0x1500 +#define OMAP54XX_PRM_L3INIT_INST 0x1600 +#define OMAP54XX_PRM_CUSTEFUSE_INST 0x1700 +#define OMAP54XX_PRM_WKUPAON_INST 0x1800 +#define OMAP54XX_PRM_WKUPAON_CM_INST 0x1900 +#define OMAP54XX_PRM_EMU_INST 0x1a00 +#define OMAP54XX_PRM_EMU_CM_INST 0x1b00 +#define OMAP54XX_PRM_DEVICE_INST 0x1c00 +#define OMAP54XX_PRM_INSTR_INST 0x1f00 + +/* PRM clockdomain register offsets (from instance start) */ +#define OMAP54XX_PRM_WKUPAON_CM_WKUPAON_CDOFFS 0x0000 +#define OMAP54XX_PRM_EMU_CM_EMU_CDOFFS 0x0000 + +/* PRM */ + +/* PRM.OCP_SOCKET_PRM register offsets */ +#define OMAP54XX_REVISION_PRM_OFFSET 0x0000 +#define OMAP54XX_PRM_IRQSTATUS_MPU_OFFSET 0x0010 +#define OMAP54XX_PRM_IRQSTATUS_MPU_2_OFFSET 0x0014 +#define OMAP54XX_PRM_IRQENABLE_MPU_OFFSET 0x0018 +#define OMAP54XX_PRM_IRQENABLE_MPU_2_OFFSET 0x001c +#define OMAP54XX_PRM_IRQSTATUS_IPU_OFFSET 0x0020 +#define OMAP54XX_PRM_IRQENABLE_IPU_OFFSET 0x0028 +#define OMAP54XX_PRM_IRQSTATUS_DSP_OFFSET 0x0030 +#define OMAP54XX_PRM_IRQENABLE_DSP_OFFSET 0x0038 +#define OMAP54XX_CM_PRM_PROFILING_CLKCTRL_OFFSET 0x0040 +#define OMAP54XX_CM_PRM_PROFILING_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_OCP_SOCKET_INST, 0x0040) +#define OMAP54XX_PRM_DEBUG_OUT_OFFSET 0x0084 +#define OMAP54XX_PRM_DEBUG_TRANS_CFG_OFFSET 0x0090 +#define OMAP54XX_PRM_DEBUG_OFF_TRANS_OFFSET 0x0094 +#define OMAP54XX_PRM_DEBUG_CORE_RET_TRANS_OFFSET 0x0098 +#define OMAP54XX_PRM_DEBUG_MPU_RET_TRANS_OFFSET 0x009c +#define OMAP54XX_PRM_DEBUG_MM_RET_TRANS_OFFSET 0x00a0 +#define OMAP54XX_PRM_DEBUG_WKUPAON_FD_TRANS_OFFSET 0x00a4 + +/* PRM.CKGEN_PRM register offsets */ +#define OMAP54XX_CM_CLKSEL_ABE_DSS_SYS_OFFSET 0x0000 +#define OMAP54XX_CM_CLKSEL_ABE_DSS_SYS OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_CKGEN_INST, 0x0000) +#define OMAP54XX_CM_CLKSEL_WKUPAON_OFFSET 0x0008 +#define OMAP54XX_CM_CLKSEL_WKUPAON OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_CKGEN_INST, 0x0008) +#define OMAP54XX_CM_CLKSEL_ABE_PLL_REF_OFFSET 0x000c +#define OMAP54XX_CM_CLKSEL_ABE_PLL_REF OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_CKGEN_INST, 0x000c) +#define OMAP54XX_CM_CLKSEL_SYS_OFFSET 0x0010 +#define OMAP54XX_CM_CLKSEL_SYS OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_CKGEN_INST, 0x0010) + +/* PRM.MPU_PRM register offsets */ +#define OMAP54XX_PM_MPU_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_MPU_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_MPU_MPU_CONTEXT_OFFSET 0x0024 + +/* PRM.DSP_PRM register offsets */ +#define OMAP54XX_PM_DSP_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_DSP_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_DSP_RSTCTRL_OFFSET 0x0010 +#define OMAP54XX_RM_DSP_RSTST_OFFSET 0x0014 +#define OMAP54XX_RM_DSP_DSP_CONTEXT_OFFSET 0x0024 + +/* PRM.ABE_PRM register offsets */ +#define OMAP54XX_PM_ABE_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_ABE_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_ABE_AESS_CONTEXT_OFFSET 0x002c +#define OMAP54XX_PM_ABE_MCPDM_WKDEP_OFFSET 0x0030 +#define OMAP54XX_RM_ABE_MCPDM_CONTEXT_OFFSET 0x0034 +#define OMAP54XX_PM_ABE_DMIC_WKDEP_OFFSET 0x0038 +#define OMAP54XX_RM_ABE_DMIC_CONTEXT_OFFSET 0x003c +#define OMAP54XX_PM_ABE_MCASP_WKDEP_OFFSET 0x0040 +#define OMAP54XX_RM_ABE_MCASP_CONTEXT_OFFSET 0x0044 +#define OMAP54XX_PM_ABE_MCBSP1_WKDEP_OFFSET 0x0048 +#define OMAP54XX_RM_ABE_MCBSP1_CONTEXT_OFFSET 0x004c +#define OMAP54XX_PM_ABE_MCBSP2_WKDEP_OFFSET 0x0050 +#define OMAP54XX_RM_ABE_MCBSP2_CONTEXT_OFFSET 0x0054 +#define OMAP54XX_PM_ABE_MCBSP3_WKDEP_OFFSET 0x0058 +#define OMAP54XX_RM_ABE_MCBSP3_CONTEXT_OFFSET 0x005c +#define OMAP54XX_PM_ABE_SLIMBUS1_WKDEP_OFFSET 0x0060 +#define OMAP54XX_RM_ABE_SLIMBUS1_CONTEXT_OFFSET 0x0064 +#define OMAP54XX_PM_ABE_TIMER5_WKDEP_OFFSET 0x0068 +#define OMAP54XX_RM_ABE_TIMER5_CONTEXT_OFFSET 0x006c +#define OMAP54XX_PM_ABE_TIMER6_WKDEP_OFFSET 0x0070 +#define OMAP54XX_RM_ABE_TIMER6_CONTEXT_OFFSET 0x0074 +#define OMAP54XX_PM_ABE_TIMER7_WKDEP_OFFSET 0x0078 +#define OMAP54XX_RM_ABE_TIMER7_CONTEXT_OFFSET 0x007c +#define OMAP54XX_PM_ABE_TIMER8_WKDEP_OFFSET 0x0080 +#define OMAP54XX_RM_ABE_TIMER8_CONTEXT_OFFSET 0x0084 +#define OMAP54XX_PM_ABE_WD_TIMER3_WKDEP_OFFSET 0x0088 +#define OMAP54XX_RM_ABE_WD_TIMER3_CONTEXT_OFFSET 0x008c + +/* PRM.COREAON_PRM register offsets */ +#define OMAP54XX_PM_COREAON_SMARTREFLEX_MPU_WKDEP_OFFSET 0x0028 +#define OMAP54XX_RM_COREAON_SMARTREFLEX_MPU_CONTEXT_OFFSET 0x002c +#define OMAP54XX_PM_COREAON_SMARTREFLEX_MM_WKDEP_OFFSET 0x0030 +#define OMAP54XX_RM_COREAON_SMARTREFLEX_MM_CONTEXT_OFFSET 0x0034 +#define OMAP54XX_PM_COREAON_SMARTREFLEX_CORE_WKDEP_OFFSET 0x0038 +#define OMAP54XX_RM_COREAON_SMARTREFLEX_CORE_CONTEXT_OFFSET 0x003c + +/* PRM.CORE_PRM register offsets */ +#define OMAP54XX_PM_CORE_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_CORE_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET 0x0024 +#define OMAP54XX_RM_L3MAIN2_L3_MAIN_2_CONTEXT_OFFSET 0x0124 +#define OMAP54XX_RM_L3MAIN2_GPMC_CONTEXT_OFFSET 0x012c +#define OMAP54XX_RM_L3MAIN2_OCMC_RAM_CONTEXT_OFFSET 0x0134 +#define OMAP54XX_RM_IPU_RSTCTRL_OFFSET 0x0210 +#define OMAP54XX_RM_IPU_RSTST_OFFSET 0x0214 +#define OMAP54XX_RM_IPU_IPU_CONTEXT_OFFSET 0x0224 +#define OMAP54XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET 0x0324 +#define OMAP54XX_RM_EMIF_DMM_CONTEXT_OFFSET 0x0424 +#define OMAP54XX_RM_EMIF_EMIF_OCP_FW_CONTEXT_OFFSET 0x042c +#define OMAP54XX_RM_EMIF_EMIF1_CONTEXT_OFFSET 0x0434 +#define OMAP54XX_RM_EMIF_EMIF2_CONTEXT_OFFSET 0x043c +#define OMAP54XX_RM_EMIF_EMIF_DLL_CONTEXT_OFFSET 0x0444 +#define OMAP54XX_RM_C2C_C2C_CONTEXT_OFFSET 0x0524 +#define OMAP54XX_RM_C2C_MODEM_ICR_CONTEXT_OFFSET 0x052c +#define OMAP54XX_RM_C2C_C2C_OCP_FW_CONTEXT_OFFSET 0x0534 +#define OMAP54XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET 0x0624 +#define OMAP54XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET 0x062c +#define OMAP54XX_RM_L4CFG_MAILBOX_CONTEXT_OFFSET 0x0634 +#define OMAP54XX_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET 0x063c +#define OMAP54XX_RM_L4CFG_OCP2SCP2_CONTEXT_OFFSET 0x0644 +#define OMAP54XX_RM_L3INSTR_L3_MAIN_3_CONTEXT_OFFSET 0x0724 +#define OMAP54XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET 0x072c +#define OMAP54XX_RM_L3INSTR_OCP_WP_NOC_CONTEXT_OFFSET 0x0744 +#define OMAP54XX_RM_MIPIEXT_LLI_CONTEXT_OFFSET 0x0824 +#define OMAP54XX_RM_MIPIEXT_LLI_OCP_FW_CONTEXT_OFFSET 0x082c +#define OMAP54XX_RM_MIPIEXT_MPHY_CONTEXT_OFFSET 0x0834 +#define OMAP54XX_PM_L4PER_TIMER10_WKDEP_OFFSET 0x0928 +#define OMAP54XX_RM_L4PER_TIMER10_CONTEXT_OFFSET 0x092c +#define OMAP54XX_PM_L4PER_TIMER11_WKDEP_OFFSET 0x0930 +#define OMAP54XX_RM_L4PER_TIMER11_CONTEXT_OFFSET 0x0934 +#define OMAP54XX_PM_L4PER_TIMER2_WKDEP_OFFSET 0x0938 +#define OMAP54XX_RM_L4PER_TIMER2_CONTEXT_OFFSET 0x093c +#define OMAP54XX_PM_L4PER_TIMER3_WKDEP_OFFSET 0x0940 +#define OMAP54XX_RM_L4PER_TIMER3_CONTEXT_OFFSET 0x0944 +#define OMAP54XX_PM_L4PER_TIMER4_WKDEP_OFFSET 0x0948 +#define OMAP54XX_RM_L4PER_TIMER4_CONTEXT_OFFSET 0x094c +#define OMAP54XX_PM_L4PER_TIMER9_WKDEP_OFFSET 0x0950 +#define OMAP54XX_RM_L4PER_TIMER9_CONTEXT_OFFSET 0x0954 +#define OMAP54XX_RM_L4PER_ELM_CONTEXT_OFFSET 0x095c +#define OMAP54XX_PM_L4PER_GPIO2_WKDEP_OFFSET 0x0960 +#define OMAP54XX_RM_L4PER_GPIO2_CONTEXT_OFFSET 0x0964 +#define OMAP54XX_PM_L4PER_GPIO3_WKDEP_OFFSET 0x0968 +#define OMAP54XX_RM_L4PER_GPIO3_CONTEXT_OFFSET 0x096c +#define OMAP54XX_PM_L4PER_GPIO4_WKDEP_OFFSET 0x0970 +#define OMAP54XX_RM_L4PER_GPIO4_CONTEXT_OFFSET 0x0974 +#define OMAP54XX_PM_L4PER_GPIO5_WKDEP_OFFSET 0x0978 +#define OMAP54XX_RM_L4PER_GPIO5_CONTEXT_OFFSET 0x097c +#define OMAP54XX_PM_L4PER_GPIO6_WKDEP_OFFSET 0x0980 +#define OMAP54XX_RM_L4PER_GPIO6_CONTEXT_OFFSET 0x0984 +#define OMAP54XX_RM_L4PER_HDQ1W_CONTEXT_OFFSET 0x098c +#define OMAP54XX_PM_L4PER_I2C1_WKDEP_OFFSET 0x09a0 +#define OMAP54XX_RM_L4PER_I2C1_CONTEXT_OFFSET 0x09a4 +#define OMAP54XX_PM_L4PER_I2C2_WKDEP_OFFSET 0x09a8 +#define OMAP54XX_RM_L4PER_I2C2_CONTEXT_OFFSET 0x09ac +#define OMAP54XX_PM_L4PER_I2C3_WKDEP_OFFSET 0x09b0 +#define OMAP54XX_RM_L4PER_I2C3_CONTEXT_OFFSET 0x09b4 +#define OMAP54XX_PM_L4PER_I2C4_WKDEP_OFFSET 0x09b8 +#define OMAP54XX_RM_L4PER_I2C4_CONTEXT_OFFSET 0x09bc +#define OMAP54XX_RM_L4PER_L4_PER_CONTEXT_OFFSET 0x09c0 +#define OMAP54XX_PM_L4PER_MCSPI1_WKDEP_OFFSET 0x09f0 +#define OMAP54XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET 0x09f4 +#define OMAP54XX_PM_L4PER_MCSPI2_WKDEP_OFFSET 0x09f8 +#define OMAP54XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET 0x09fc +#define OMAP54XX_PM_L4PER_MCSPI3_WKDEP_OFFSET 0x0a00 +#define OMAP54XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET 0x0a04 +#define OMAP54XX_PM_L4PER_MCSPI4_WKDEP_OFFSET 0x0a08 +#define OMAP54XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET 0x0a0c +#define OMAP54XX_PM_L4PER_GPIO7_WKDEP_OFFSET 0x0a10 +#define OMAP54XX_RM_L4PER_GPIO7_CONTEXT_OFFSET 0x0a14 +#define OMAP54XX_PM_L4PER_GPIO8_WKDEP_OFFSET 0x0a18 +#define OMAP54XX_RM_L4PER_GPIO8_CONTEXT_OFFSET 0x0a1c +#define OMAP54XX_PM_L4PER_MMC3_WKDEP_OFFSET 0x0a20 +#define OMAP54XX_RM_L4PER_MMC3_CONTEXT_OFFSET 0x0a24 +#define OMAP54XX_PM_L4PER_MMC4_WKDEP_OFFSET 0x0a28 +#define OMAP54XX_RM_L4PER_MMC4_CONTEXT_OFFSET 0x0a2c +#define OMAP54XX_PM_L4PER_UART1_WKDEP_OFFSET 0x0a40 +#define OMAP54XX_RM_L4PER_UART1_CONTEXT_OFFSET 0x0a44 +#define OMAP54XX_PM_L4PER_UART2_WKDEP_OFFSET 0x0a48 +#define OMAP54XX_RM_L4PER_UART2_CONTEXT_OFFSET 0x0a4c +#define OMAP54XX_PM_L4PER_UART3_WKDEP_OFFSET 0x0a50 +#define OMAP54XX_RM_L4PER_UART3_CONTEXT_OFFSET 0x0a54 +#define OMAP54XX_RM_L4PER_UART4_CONTEXT_OFFSET 0x0a58 +#define OMAP54XX_PM_L4PER_UART4_WKDEP_OFFSET 0x0a5c +#define OMAP54XX_PM_L4PER_MMC5_WKDEP_OFFSET 0x0a60 +#define OMAP54XX_RM_L4PER_MMC5_CONTEXT_OFFSET 0x0a64 +#define OMAP54XX_PM_L4PER_I2C5_WKDEP_OFFSET 0x0a68 +#define OMAP54XX_RM_L4PER_I2C5_CONTEXT_OFFSET 0x0a6c +#define OMAP54XX_PM_L4PER_UART5_WKDEP_OFFSET 0x0a70 +#define OMAP54XX_RM_L4PER_UART5_CONTEXT_OFFSET 0x0a74 +#define OMAP54XX_PM_L4PER_UART6_WKDEP_OFFSET 0x0a78 +#define OMAP54XX_RM_L4PER_UART6_CONTEXT_OFFSET 0x0a7c +#define OMAP54XX_RM_L4SEC_AES1_CONTEXT_OFFSET 0x0aa4 +#define OMAP54XX_RM_L4SEC_AES2_CONTEXT_OFFSET 0x0aac +#define OMAP54XX_RM_L4SEC_DES3DES_CONTEXT_OFFSET 0x0ab4 +#define OMAP54XX_RM_L4SEC_FPKA_CONTEXT_OFFSET 0x0abc +#define OMAP54XX_RM_L4SEC_RNG_CONTEXT_OFFSET 0x0ac4 +#define OMAP54XX_RM_L4SEC_SHA2MD5_CONTEXT_OFFSET 0x0acc +#define OMAP54XX_RM_L4SEC_DMA_CRYPTO_CONTEXT_OFFSET 0x0adc + +/* PRM.IVA_PRM register offsets */ +#define OMAP54XX_PM_IVA_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_IVA_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_IVA_RSTCTRL_OFFSET 0x0010 +#define OMAP54XX_RM_IVA_RSTST_OFFSET 0x0014 +#define OMAP54XX_RM_IVA_IVA_CONTEXT_OFFSET 0x0024 +#define OMAP54XX_RM_IVA_SL2_CONTEXT_OFFSET 0x002c + +/* PRM.CAM_PRM register offsets */ +#define OMAP54XX_PM_CAM_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_CAM_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_CAM_ISS_CONTEXT_OFFSET 0x0024 +#define OMAP54XX_RM_CAM_FDIF_CONTEXT_OFFSET 0x002c +#define OMAP54XX_RM_CAM_CAL_CONTEXT_OFFSET 0x0034 + +/* PRM.DSS_PRM register offsets */ +#define OMAP54XX_PM_DSS_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_DSS_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_PM_DSS_DSS_WKDEP_OFFSET 0x0020 +#define OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET 0x0024 +#define OMAP54XX_RM_DSS_BB2D_CONTEXT_OFFSET 0x0034 + +/* PRM.GPU_PRM register offsets */ +#define OMAP54XX_PM_GPU_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_GPU_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_GPU_GPU_CONTEXT_OFFSET 0x0024 + +/* PRM.L3INIT_PRM register offsets */ +#define OMAP54XX_PM_L3INIT_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_L3INIT_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_PM_L3INIT_MMC1_WKDEP_OFFSET 0x0028 +#define OMAP54XX_RM_L3INIT_MMC1_CONTEXT_OFFSET 0x002c +#define OMAP54XX_PM_L3INIT_MMC2_WKDEP_OFFSET 0x0030 +#define OMAP54XX_RM_L3INIT_MMC2_CONTEXT_OFFSET 0x0034 +#define OMAP54XX_PM_L3INIT_HSI_WKDEP_OFFSET 0x0038 +#define OMAP54XX_RM_L3INIT_HSI_CONTEXT_OFFSET 0x003c +#define OMAP54XX_PM_L3INIT_UNIPRO2_WKDEP_OFFSET 0x0040 +#define OMAP54XX_RM_L3INIT_UNIPRO2_CONTEXT_OFFSET 0x0044 +#define OMAP54XX_PM_L3INIT_USB_HOST_HS_WKDEP_OFFSET 0x0058 +#define OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET 0x005c +#define OMAP54XX_PM_L3INIT_USB_TLL_HS_WKDEP_OFFSET 0x0068 +#define OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET 0x006c +#define OMAP54XX_RM_L3INIT_IEEE1500_2_OCP_CONTEXT_OFFSET 0x007c +#define OMAP54XX_PM_L3INIT_SATA_WKDEP_OFFSET 0x0088 +#define OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET 0x008c +#define OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET 0x00e4 +#define OMAP54XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET 0x00ec +#define OMAP54XX_PM_L3INIT_USB_OTG_SS_WKDEP_OFFSET 0x00f0 +#define OMAP54XX_RM_L3INIT_USB_OTG_SS_CONTEXT_OFFSET 0x00f4 + +/* PRM.CUSTEFUSE_PRM register offsets */ +#define OMAP54XX_PM_CUSTEFUSE_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_CUSTEFUSE_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_CUSTEFUSE_EFUSE_CTRL_CUST_CONTEXT_OFFSET 0x0024 + +/* PRM.WKUPAON_PRM register offsets */ +#define OMAP54XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET 0x0024 +#define OMAP54XX_RM_WKUPAON_WD_TIMER1_CONTEXT_OFFSET 0x002c +#define OMAP54XX_PM_WKUPAON_WD_TIMER2_WKDEP_OFFSET 0x0030 +#define OMAP54XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET 0x0034 +#define OMAP54XX_PM_WKUPAON_GPIO1_WKDEP_OFFSET 0x0038 +#define OMAP54XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET 0x003c +#define OMAP54XX_PM_WKUPAON_TIMER1_WKDEP_OFFSET 0x0040 +#define OMAP54XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET 0x0044 +#define OMAP54XX_PM_WKUPAON_TIMER12_WKDEP_OFFSET 0x0048 +#define OMAP54XX_RM_WKUPAON_TIMER12_CONTEXT_OFFSET 0x004c +#define OMAP54XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET 0x0054 +#define OMAP54XX_RM_WKUPAON_SAR_RAM_CONTEXT_OFFSET 0x0064 +#define OMAP54XX_PM_WKUPAON_KBD_WKDEP_OFFSET 0x0078 +#define OMAP54XX_RM_WKUPAON_KBD_CONTEXT_OFFSET 0x007c + +/* PRM.WKUPAON_CM register offsets */ +#define OMAP54XX_CM_WKUPAON_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_WKUPAON_L4_WKUP_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0020) +#define OMAP54XX_CM_WKUPAON_WD_TIMER1_CLKCTRL_OFFSET 0x0028 +#define OMAP54XX_CM_WKUPAON_WD_TIMER1_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0028) +#define OMAP54XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET 0x0030 +#define OMAP54XX_CM_WKUPAON_WD_TIMER2_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0030) +#define OMAP54XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET 0x0038 +#define OMAP54XX_CM_WKUPAON_GPIO1_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0038) +#define OMAP54XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET 0x0040 +#define OMAP54XX_CM_WKUPAON_TIMER1_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0040) +#define OMAP54XX_CM_WKUPAON_TIMER12_CLKCTRL_OFFSET 0x0048 +#define OMAP54XX_CM_WKUPAON_TIMER12_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0048) +#define OMAP54XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET 0x0050 +#define OMAP54XX_CM_WKUPAON_COUNTER_32K_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0050) +#define OMAP54XX_CM_WKUPAON_SAR_RAM_CLKCTRL_OFFSET 0x0060 +#define OMAP54XX_CM_WKUPAON_SAR_RAM_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0060) +#define OMAP54XX_CM_WKUPAON_KBD_CLKCTRL_OFFSET 0x0078 +#define OMAP54XX_CM_WKUPAON_KBD_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0078) +#define OMAP54XX_CM_WKUPAON_SCRM_CLKCTRL_OFFSET 0x0090 +#define OMAP54XX_CM_WKUPAON_SCRM_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0090) +#define OMAP54XX_CM_WKUPAON_IO_SRCOMP_CLKCTRL_OFFSET 0x0098 +#define OMAP54XX_CM_WKUPAON_IO_SRCOMP_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0098) + +/* PRM.EMU_PRM register offsets */ +#define OMAP54XX_PM_EMU_PWRSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PM_EMU_PWRSTST_OFFSET 0x0004 +#define OMAP54XX_RM_EMU_DEBUGSS_CONTEXT_OFFSET 0x0024 + +/* PRM.EMU_CM register offsets */ +#define OMAP54XX_CM_EMU_CLKSTCTRL_OFFSET 0x0000 +#define OMAP54XX_CM_EMU_DYNAMICDEP_OFFSET 0x0008 +#define OMAP54XX_CM_EMU_DEBUGSS_CLKCTRL_OFFSET 0x0020 +#define OMAP54XX_CM_EMU_DEBUGSS_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_EMU_CM_INST, 0x0020) +#define OMAP54XX_CM_EMU_MPU_EMU_DBG_CLKCTRL_OFFSET 0x0028 +#define OMAP54XX_CM_EMU_MPU_EMU_DBG_CLKCTRL OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_EMU_CM_INST, 0x0028) + +/* PRM.DEVICE_PRM register offsets */ +#define OMAP54XX_PRM_RSTCTRL_OFFSET 0x0000 +#define OMAP54XX_PRM_RSTST_OFFSET 0x0004 +#define OMAP54XX_PRM_RSTTIME_OFFSET 0x0008 +#define OMAP54XX_PRM_CLKREQCTRL_OFFSET 0x000c +#define OMAP54XX_PRM_VOLTCTRL_OFFSET 0x0010 +#define OMAP54XX_PRM_PWRREQCTRL_OFFSET 0x0014 +#define OMAP54XX_PRM_PSCON_COUNT_OFFSET 0x0018 +#define OMAP54XX_PRM_IO_COUNT_OFFSET 0x001c +#define OMAP54XX_PRM_IO_PMCTRL_OFFSET 0x0020 +#define OMAP54XX_PRM_VOLTSETUP_WARMRESET_OFFSET 0x0024 +#define OMAP54XX_PRM_VOLTSETUP_CORE_OFF_OFFSET 0x0028 +#define OMAP54XX_PRM_VOLTSETUP_MPU_OFF_OFFSET 0x002c +#define OMAP54XX_PRM_VOLTSETUP_MM_OFF_OFFSET 0x0030 +#define OMAP54XX_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET 0x0034 +#define OMAP54XX_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET 0x0038 +#define OMAP54XX_PRM_VOLTSETUP_MM_RET_SLEEP_OFFSET 0x003c +#define OMAP54XX_PRM_VP_CORE_CONFIG_OFFSET 0x0040 +#define OMAP54XX_PRM_VP_CORE_STATUS_OFFSET 0x0044 +#define OMAP54XX_PRM_VP_CORE_VLIMITTO_OFFSET 0x0048 +#define OMAP54XX_PRM_VP_CORE_VOLTAGE_OFFSET 0x004c +#define OMAP54XX_PRM_VP_CORE_VSTEPMAX_OFFSET 0x0050 +#define OMAP54XX_PRM_VP_CORE_VSTEPMIN_OFFSET 0x0054 +#define OMAP54XX_PRM_VP_MPU_CONFIG_OFFSET 0x0058 +#define OMAP54XX_PRM_VP_MPU_STATUS_OFFSET 0x005c +#define OMAP54XX_PRM_VP_MPU_VLIMITTO_OFFSET 0x0060 +#define OMAP54XX_PRM_VP_MPU_VOLTAGE_OFFSET 0x0064 +#define OMAP54XX_PRM_VP_MPU_VSTEPMAX_OFFSET 0x0068 +#define OMAP54XX_PRM_VP_MPU_VSTEPMIN_OFFSET 0x006c +#define OMAP54XX_PRM_VP_MM_CONFIG_OFFSET 0x0070 +#define OMAP54XX_PRM_VP_MM_STATUS_OFFSET 0x0074 +#define OMAP54XX_PRM_VP_MM_VLIMITTO_OFFSET 0x0078 +#define OMAP54XX_PRM_VP_MM_VOLTAGE_OFFSET 0x007c +#define OMAP54XX_PRM_VP_MM_VSTEPMAX_OFFSET 0x0080 +#define OMAP54XX_PRM_VP_MM_VSTEPMIN_OFFSET 0x0084 +#define OMAP54XX_PRM_VC_SMPS_CORE_CONFIG_OFFSET 0x0088 +#define OMAP54XX_PRM_VC_SMPS_MM_CONFIG_OFFSET 0x008c +#define OMAP54XX_PRM_VC_SMPS_MPU_CONFIG_OFFSET 0x0090 +#define OMAP54XX_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET 0x0094 +#define OMAP54XX_PRM_VC_VAL_CMD_VDD_MM_L_OFFSET 0x0098 +#define OMAP54XX_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET 0x009c +#define OMAP54XX_PRM_VC_VAL_BYPASS_OFFSET 0x00a0 +#define OMAP54XX_PRM_VC_CORE_ERRST_OFFSET 0x00a4 +#define OMAP54XX_PRM_VC_MM_ERRST_OFFSET 0x00a8 +#define OMAP54XX_PRM_VC_MPU_ERRST_OFFSET 0x00ac +#define OMAP54XX_PRM_VC_BYPASS_ERRST_OFFSET 0x00b0 +#define OMAP54XX_PRM_VC_CFG_I2C_MODE_OFFSET 0x00b4 +#define OMAP54XX_PRM_VC_CFG_I2C_CLK_OFFSET 0x00b8 +#define OMAP54XX_PRM_SRAM_COUNT_OFFSET 0x00bc +#define OMAP54XX_PRM_SRAM_WKUP_SETUP_OFFSET 0x00c0 +#define OMAP54XX_PRM_SLDO_CORE_SETUP_OFFSET 0x00c4 +#define OMAP54XX_PRM_SLDO_CORE_CTRL_OFFSET 0x00c8 +#define OMAP54XX_PRM_SLDO_MPU_SETUP_OFFSET 0x00cc +#define OMAP54XX_PRM_SLDO_MPU_CTRL_OFFSET 0x00d0 +#define OMAP54XX_PRM_SLDO_MM_SETUP_OFFSET 0x00d4 +#define OMAP54XX_PRM_SLDO_MM_CTRL_OFFSET 0x00d8 +#define OMAP54XX_PRM_ABBLDO_MPU_SETUP_OFFSET 0x00dc +#define OMAP54XX_PRM_ABBLDO_MPU_CTRL_OFFSET 0x00e0 +#define OMAP54XX_PRM_ABBLDO_MM_SETUP_OFFSET 0x00e4 +#define OMAP54XX_PRM_ABBLDO_MM_CTRL_OFFSET 0x00e8 +#define OMAP54XX_PRM_BANDGAP_SETUP_OFFSET 0x00ec +#define OMAP54XX_PRM_DEVICE_OFF_CTRL_OFFSET 0x00f0 +#define OMAP54XX_PRM_PHASE1_CNDP_OFFSET 0x00f4 +#define OMAP54XX_PRM_PHASE2A_CNDP_OFFSET 0x00f8 +#define OMAP54XX_PRM_PHASE2B_CNDP_OFFSET 0x00fc +#define OMAP54XX_PRM_MODEM_IF_CTRL_OFFSET 0x0100 +#define OMAP54XX_PRM_VOLTST_MPU_OFFSET 0x0110 +#define OMAP54XX_PRM_VOLTST_MM_OFFSET 0x0114 + +#endif diff --git a/arch/arm/mach-omap2/scrm54xx.h b/arch/arm/mach-omap2/scrm54xx.h new file mode 100644 index 00000000000..57e86c8f823 --- /dev/null +++ b/arch/arm/mach-omap2/scrm54xx.h @@ -0,0 +1,231 @@ +/* + * OMAP54XX SCRM registers and bitfields + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_SCRM_54XX_H +#define __ARCH_ARM_MACH_OMAP2_SCRM_54XX_H + +#define OMAP5_SCRM_BASE 0x4ae0a000 + +#define OMAP54XX_SCRM_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP5_SCRM_BASE + (reg)) + +/* SCRM */ + +/* SCRM.SCRM register offsets */ +#define OMAP5_SCRM_REVISION_SCRM_OFFSET 0x0000 +#define OMAP5_SCRM_REVISION_SCRM OMAP54XX_SCRM_REGADDR(0x0000) +#define OMAP5_SCRM_CLKSETUPTIME_OFFSET 0x0100 +#define OMAP5_SCRM_CLKSETUPTIME OMAP54XX_SCRM_REGADDR(0x0100) +#define OMAP5_SCRM_PMICSETUPTIME_OFFSET 0x0104 +#define OMAP5_SCRM_PMICSETUPTIME OMAP54XX_SCRM_REGADDR(0x0104) +#define OMAP5_SCRM_ALTCLKSRC_OFFSET 0x0110 +#define OMAP5_SCRM_ALTCLKSRC OMAP54XX_SCRM_REGADDR(0x0110) +#define OMAP5_SCRM_MODEMCLKM_OFFSET 0x0118 +#define OMAP5_SCRM_MODEMCLKM OMAP54XX_SCRM_REGADDR(0x0118) +#define OMAP5_SCRM_D2DCLKM_OFFSET 0x011c +#define OMAP5_SCRM_D2DCLKM OMAP54XX_SCRM_REGADDR(0x011c) +#define OMAP5_SCRM_EXTCLKREQ_OFFSET 0x0200 +#define OMAP5_SCRM_EXTCLKREQ OMAP54XX_SCRM_REGADDR(0x0200) +#define OMAP5_SCRM_ACCCLKREQ_OFFSET 0x0204 +#define OMAP5_SCRM_ACCCLKREQ OMAP54XX_SCRM_REGADDR(0x0204) +#define OMAP5_SCRM_PWRREQ_OFFSET 0x0208 +#define OMAP5_SCRM_PWRREQ OMAP54XX_SCRM_REGADDR(0x0208) +#define OMAP5_SCRM_AUXCLKREQ0_OFFSET 0x0210 +#define OMAP5_SCRM_AUXCLKREQ0 OMAP54XX_SCRM_REGADDR(0x0210) +#define OMAP5_SCRM_AUXCLKREQ1_OFFSET 0x0214 +#define OMAP5_SCRM_AUXCLKREQ1 OMAP54XX_SCRM_REGADDR(0x0214) +#define OMAP5_SCRM_AUXCLKREQ2_OFFSET 0x0218 +#define OMAP5_SCRM_AUXCLKREQ2 OMAP54XX_SCRM_REGADDR(0x0218) +#define OMAP5_SCRM_AUXCLKREQ3_OFFSET 0x021c +#define OMAP5_SCRM_AUXCLKREQ3 OMAP54XX_SCRM_REGADDR(0x021c) +#define OMAP5_SCRM_AUXCLKREQ4_OFFSET 0x0220 +#define OMAP5_SCRM_AUXCLKREQ4 OMAP54XX_SCRM_REGADDR(0x0220) +#define OMAP5_SCRM_AUXCLKREQ5_OFFSET 0x0224 +#define OMAP5_SCRM_AUXCLKREQ5 OMAP54XX_SCRM_REGADDR(0x0224) +#define OMAP5_SCRM_D2DCLKREQ_OFFSET 0x0234 +#define OMAP5_SCRM_D2DCLKREQ OMAP54XX_SCRM_REGADDR(0x0234) +#define OMAP5_SCRM_AUXCLK0_OFFSET 0x0310 +#define OMAP5_SCRM_AUXCLK0 OMAP54XX_SCRM_REGADDR(0x0310) +#define OMAP5_SCRM_AUXCLK1_OFFSET 0x0314 +#define OMAP5_SCRM_AUXCLK1 OMAP54XX_SCRM_REGADDR(0x0314) +#define OMAP5_SCRM_AUXCLK2_OFFSET 0x0318 +#define OMAP5_SCRM_AUXCLK2 OMAP54XX_SCRM_REGADDR(0x0318) +#define OMAP5_SCRM_AUXCLK3_OFFSET 0x031c +#define OMAP5_SCRM_AUXCLK3 OMAP54XX_SCRM_REGADDR(0x031c) +#define OMAP5_SCRM_AUXCLK4_OFFSET 0x0320 +#define OMAP5_SCRM_AUXCLK4 OMAP54XX_SCRM_REGADDR(0x0320) +#define OMAP5_SCRM_AUXCLK5_OFFSET 0x0324 +#define OMAP5_SCRM_AUXCLK5 OMAP54XX_SCRM_REGADDR(0x0324) +#define OMAP5_SCRM_RSTTIME_OFFSET 0x0400 +#define OMAP5_SCRM_RSTTIME OMAP54XX_SCRM_REGADDR(0x0400) +#define OMAP5_SCRM_MODEMRSTCTRL_OFFSET 0x0418 +#define OMAP5_SCRM_MODEMRSTCTRL OMAP54XX_SCRM_REGADDR(0x0418) +#define OMAP5_SCRM_D2DRSTCTRL_OFFSET 0x041c +#define OMAP5_SCRM_D2DRSTCTRL OMAP54XX_SCRM_REGADDR(0x041c) +#define OMAP5_SCRM_EXTPWRONRSTCTRL_OFFSET 0x0420 +#define OMAP5_SCRM_EXTPWRONRSTCTRL OMAP54XX_SCRM_REGADDR(0x0420) +#define OMAP5_SCRM_EXTWARMRSTST_OFFSET 0x0510 +#define OMAP5_SCRM_EXTWARMRSTST OMAP54XX_SCRM_REGADDR(0x0510) +#define OMAP5_SCRM_APEWARMRSTST_OFFSET 0x0514 +#define OMAP5_SCRM_APEWARMRSTST OMAP54XX_SCRM_REGADDR(0x0514) +#define OMAP5_SCRM_MODEMWARMRSTST_OFFSET 0x0518 +#define OMAP5_SCRM_MODEMWARMRSTST OMAP54XX_SCRM_REGADDR(0x0518) +#define OMAP5_SCRM_D2DWARMRSTST_OFFSET 0x051c +#define OMAP5_SCRM_D2DWARMRSTST OMAP54XX_SCRM_REGADDR(0x051c) + +/* + * Used by AUXCLKREQ0, AUXCLKREQ1, AUXCLKREQ2, AUXCLKREQ3, AUXCLKREQ4, + * AUXCLKREQ5, D2DCLKREQ + */ +#define OMAP5_ACCURACY_SHIFT 1 +#define OMAP5_ACCURACY_WIDTH 0x1 +#define OMAP5_ACCURACY_MASK (1 << 1) + +/* Used by APEWARMRSTST */ +#define OMAP5_APEWARMRSTST_SHIFT 1 +#define OMAP5_APEWARMRSTST_WIDTH 0x1 +#define OMAP5_APEWARMRSTST_MASK (1 << 1) + +/* Used by AUXCLK0, AUXCLK1, AUXCLK2, AUXCLK3, AUXCLK4, AUXCLK5 */ +#define OMAP5_CLKDIV_SHIFT 16 +#define OMAP5_CLKDIV_WIDTH 0x4 +#define OMAP5_CLKDIV_MASK (0xf << 16) + +/* Used by D2DCLKM, MODEMCLKM */ +#define OMAP5_CLK_32KHZ_SHIFT 0 +#define OMAP5_CLK_32KHZ_WIDTH 0x1 +#define OMAP5_CLK_32KHZ_MASK (1 << 0) + +/* Used by D2DRSTCTRL, MODEMRSTCTRL */ +#define OMAP5_COLDRST_SHIFT 0 +#define OMAP5_COLDRST_WIDTH 0x1 +#define OMAP5_COLDRST_MASK (1 << 0) + +/* Used by D2DWARMRSTST */ +#define OMAP5_D2DWARMRSTST_SHIFT 3 +#define OMAP5_D2DWARMRSTST_WIDTH 0x1 +#define OMAP5_D2DWARMRSTST_MASK (1 << 3) + +/* Used by AUXCLK0 */ +#define OMAP5_DISABLECLK_SHIFT 9 +#define OMAP5_DISABLECLK_WIDTH 0x1 +#define OMAP5_DISABLECLK_MASK (1 << 9) + +/* Used by CLKSETUPTIME */ +#define OMAP5_DOWNTIME_SHIFT 16 +#define OMAP5_DOWNTIME_WIDTH 0x6 +#define OMAP5_DOWNTIME_MASK (0x3f << 16) + +/* Used by AUXCLK0, AUXCLK1, AUXCLK2, AUXCLK3, AUXCLK4, AUXCLK5 */ +#define OMAP5_ENABLE_SHIFT 8 +#define OMAP5_ENABLE_WIDTH 0x1 +#define OMAP5_ENABLE_MASK (1 << 8) + +/* Renamed from ENABLE Used by EXTPWRONRSTCTRL */ +#define OMAP5_ENABLE_0_0_SHIFT 0 +#define OMAP5_ENABLE_0_0_WIDTH 0x1 +#define OMAP5_ENABLE_0_0_MASK (1 << 0) + +/* Used by ALTCLKSRC */ +#define OMAP5_ENABLE_EXT_SHIFT 3 +#define OMAP5_ENABLE_EXT_WIDTH 0x1 +#define OMAP5_ENABLE_EXT_MASK (1 << 3) + +/* Used by ALTCLKSRC */ +#define OMAP5_ENABLE_INT_SHIFT 2 +#define OMAP5_ENABLE_INT_WIDTH 0x1 +#define OMAP5_ENABLE_INT_MASK (1 << 2) + +/* Used by EXTWARMRSTST */ +#define OMAP5_EXTWARMRSTST_SHIFT 0 +#define OMAP5_EXTWARMRSTST_WIDTH 0x1 +#define OMAP5_EXTWARMRSTST_MASK (1 << 0) + +/* + * Used by AUXCLKREQ0, AUXCLKREQ1, AUXCLKREQ2, AUXCLKREQ3, AUXCLKREQ4, + * AUXCLKREQ5 + */ +#define OMAP5_MAPPING_SHIFT 2 +#define OMAP5_MAPPING_WIDTH 0x3 +#define OMAP5_MAPPING_MASK (0x7 << 2) + +/* Used by ALTCLKSRC */ +#define OMAP5_MODE_SHIFT 0 +#define OMAP5_MODE_WIDTH 0x2 +#define OMAP5_MODE_MASK (0x3 << 0) + +/* Used by MODEMWARMRSTST */ +#define OMAP5_MODEMWARMRSTST_SHIFT 2 +#define OMAP5_MODEMWARMRSTST_WIDTH 0x1 +#define OMAP5_MODEMWARMRSTST_MASK (1 << 2) + +/* + * Used by ACCCLKREQ, AUXCLK0, AUXCLK1, AUXCLK2, AUXCLK3, AUXCLK4, AUXCLK5, + * AUXCLKREQ0, AUXCLKREQ1, AUXCLKREQ2, AUXCLKREQ3, AUXCLKREQ4, AUXCLKREQ5, + * D2DCLKREQ, EXTCLKREQ, PWRREQ + */ +#define OMAP5_POLARITY_SHIFT 0 +#define OMAP5_POLARITY_WIDTH 0x1 +#define OMAP5_POLARITY_MASK (1 << 0) + +/* Used by EXTPWRONRSTCTRL */ +#define OMAP5_PWRONRST_SHIFT 1 +#define OMAP5_PWRONRST_WIDTH 0x1 +#define OMAP5_PWRONRST_MASK (1 << 1) + +/* Used by REVISION_SCRM */ +#define OMAP5_REV_SHIFT 0 +#define OMAP5_REV_WIDTH 0x8 +#define OMAP5_REV_MASK (0xff << 0) + +/* Used by RSTTIME */ +#define OMAP5_RSTTIME_SHIFT 0 +#define OMAP5_RSTTIME_WIDTH 0x4 +#define OMAP5_RSTTIME_MASK (0xf << 0) + +/* Used by CLKSETUPTIME */ +#define OMAP5_SETUPTIME_SHIFT 0 +#define OMAP5_SETUPTIME_WIDTH 0xc +#define OMAP5_SETUPTIME_MASK (0xfff << 0) + +/* Used by PMICSETUPTIME */ +#define OMAP5_SLEEPTIME_SHIFT 0 +#define OMAP5_SLEEPTIME_WIDTH 0x6 +#define OMAP5_SLEEPTIME_MASK (0x3f << 0) + +/* Used by AUXCLK0, AUXCLK1, AUXCLK2, AUXCLK3, AUXCLK4, AUXCLK5 */ +#define OMAP5_SRCSELECT_SHIFT 1 +#define OMAP5_SRCSELECT_WIDTH 0x2 +#define OMAP5_SRCSELECT_MASK (0x3 << 1) + +/* Used by D2DCLKM */ +#define OMAP5_SYSCLK_SHIFT 1 +#define OMAP5_SYSCLK_WIDTH 0x1 +#define OMAP5_SYSCLK_MASK (1 << 1) + +/* Used by PMICSETUPTIME */ +#define OMAP5_WAKEUPTIME_SHIFT 16 +#define OMAP5_WAKEUPTIME_WIDTH 0x6 +#define OMAP5_WAKEUPTIME_MASK (0x3f << 16) + +/* Used by D2DRSTCTRL, MODEMRSTCTRL */ +#define OMAP5_WARMRST_SHIFT 1 +#define OMAP5_WARMRST_WIDTH 0x1 +#define OMAP5_WARMRST_MASK (1 << 1) + +#endif diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 197cc16870d..8c616e436bc 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -96,6 +96,15 @@ # endif #endif +#ifdef CONFIG_SOC_AM43XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am43xx +# endif +#endif + /* * Omap device type i.e. EMU/HS/TST/GP/BAD */ @@ -187,6 +196,7 @@ IS_OMAP_CLASS(44xx, 0x44) IS_AM_CLASS(35xx, 0x35) IS_OMAP_CLASS(54xx, 0x54) IS_AM_CLASS(33xx, 0x33) +IS_AM_CLASS(43xx, 0x43) IS_TI_CLASS(81xx, 0x81) @@ -202,6 +212,7 @@ IS_OMAP_SUBCLASS(543x, 0x543) IS_TI_SUBCLASS(816x, 0x816) IS_TI_SUBCLASS(814x, 0x814) IS_AM_SUBCLASS(335x, 0x335) +IS_AM_SUBCLASS(437x, 0x437) #define cpu_is_omap24xx() 0 #define cpu_is_omap242x() 0 @@ -214,6 +225,8 @@ IS_AM_SUBCLASS(335x, 0x335) #define soc_is_am35xx() 0 #define soc_is_am33xx() 0 #define soc_is_am335x() 0 +#define soc_is_am43xx() 0 +#define soc_is_am437x() 0 #define cpu_is_omap44xx() 0 #define cpu_is_omap443x() 0 #define cpu_is_omap446x() 0 @@ -341,6 +354,13 @@ IS_OMAP_TYPE(3430, 0x3430) # define soc_is_am335x() is_am335x() #endif +#ifdef CONFIG_SOC_AM43XX +# undef soc_is_am43xx +# undef soc_is_am437x +# define soc_is_am43xx() is_am43xx() +# define soc_is_am437x() is_am437x() +#endif + # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x @@ -383,6 +403,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define TI816X_CLASS 0x81600034 #define TI8168_REV_ES1_0 TI816X_CLASS #define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) +#define TI8168_REV_ES2_0 (TI816X_CLASS | (0x2 << 8)) +#define TI8168_REV_ES2_1 (TI816X_CLASS | (0x3 << 8)) #define TI814X_CLASS 0x81400034 #define TI8148_REV_ES1_0 TI814X_CLASS @@ -398,6 +420,9 @@ IS_OMAP_TYPE(3430, 0x3430) #define AM335X_REV_ES2_0 (AM335X_CLASS | (0x1 << 8)) #define AM335X_REV_ES2_1 (AM335X_CLASS | (0x2 << 8)) +#define AM437X_CLASS 0x43700000 +#define AM437X_REV_ES1_0 AM437X_CLASS + #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) #define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) @@ -424,6 +449,7 @@ void omap4xxx_check_revision(void); void omap5xxx_check_revision(void); void omap3xxx_check_features(void); void ti81xx_check_features(void); +void am33xx_check_features(void); void omap4xxx_check_features(void); /* diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c index 0ff0f068bea..4bd09683623 100644 --- a/arch/arm/mach-omap2/sram.c +++ b/arch/arm/mach-omap2/sram.c @@ -119,6 +119,9 @@ static void __init omap_detect_sram(void) if (soc_is_am33xx()) { omap_sram_start = AM33XX_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ + } else if (soc_is_am43xx()) { + omap_sram_start = AM33XX_SRAM_PA; + omap_sram_size = SZ_256K; } else if (cpu_is_omap34xx()) { omap_sram_start = OMAP3_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index f8b23b8040d..3bdb0fb0202 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -582,7 +582,7 @@ OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon", 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP2 */ -#ifdef CONFIG_ARCH_OMAP3 +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX) OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon", 2, "timer_sys_ck", NULL); OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 9bf796df1b9..f7f2879b31b 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -170,6 +170,7 @@ int omap_voltage_late_init(void); extern void omap2xxx_voltagedomains_init(void); extern void omap3xxx_voltagedomains_init(void); extern void omap44xx_voltagedomains_init(void); +extern void omap54xx_voltagedomains_init(void); struct voltagedomain *voltdm_lookup(const char *name); void voltdm_init(struct voltagedomain **voltdm_list); diff --git a/arch/arm/mach-omap2/voltagedomains54xx_data.c b/arch/arm/mach-omap2/voltagedomains54xx_data.c new file mode 100644 index 00000000000..33d22b87252 --- /dev/null +++ b/arch/arm/mach-omap2/voltagedomains54xx_data.c @@ -0,0 +1,92 @@ +/* + * OMAP5 Voltage Management Routines + * + * Based on voltagedomains44xx_data.c + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/init.h> + +#include "common.h" + +#include "prm54xx.h" +#include "voltage.h" +#include "omap_opp_data.h" +#include "vc.h" +#include "vp.h" + +static const struct omap_vfsm_instance omap5_vdd_mpu_vfsm = { + .voltsetup_reg = OMAP54XX_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET, +}; + +static const struct omap_vfsm_instance omap5_vdd_mm_vfsm = { + .voltsetup_reg = OMAP54XX_PRM_VOLTSETUP_MM_RET_SLEEP_OFFSET, +}; + +static const struct omap_vfsm_instance omap5_vdd_core_vfsm = { + .voltsetup_reg = OMAP54XX_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET, +}; + +static struct voltagedomain omap5_voltdm_mpu = { + .name = "mpu", + .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, + .vc = &omap4_vc_mpu, + .vfsm = &omap5_vdd_mpu_vfsm, + .vp = &omap4_vp_mpu, +}; + +static struct voltagedomain omap5_voltdm_mm = { + .name = "mm", + .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, + .vc = &omap4_vc_iva, + .vfsm = &omap5_vdd_mm_vfsm, + .vp = &omap4_vp_iva, +}; + +static struct voltagedomain omap5_voltdm_core = { + .name = "core", + .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, + .vc = &omap4_vc_core, + .vfsm = &omap5_vdd_core_vfsm, + .vp = &omap4_vp_core, +}; + +static struct voltagedomain omap5_voltdm_wkup = { + .name = "wkup", +}; + +static struct voltagedomain *voltagedomains_omap5[] __initdata = { + &omap5_voltdm_mpu, + &omap5_voltdm_mm, + &omap5_voltdm_core, + &omap5_voltdm_wkup, + NULL, +}; + +static const char *sys_clk_name __initdata = "sys_clkin"; + +void __init omap54xx_voltagedomains_init(void) +{ + struct voltagedomain *voltdm; + int i; + + for (i = 0; voltdm = voltagedomains_omap5[i], voltdm; i++) + voltdm->sys_clk.name = sys_clk_name; + + voltdm_init(voltagedomains_omap5); +}; diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index 13bae78b215..b1022f4315f 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -4,7 +4,6 @@ config ARCH_PICOXCELL select ARM_PATCH_PHYS_VIRT select ARM_VIC select CPU_V6K - select DW_APB_TIMER select DW_APB_TIMER_OF select GENERIC_CLOCKEVENTS select HAVE_TCM diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c index aa6a7e0e80a..b13f51bc35c 100644 --- a/arch/arm/mach-picoxcell/common.c +++ b/arch/arm/mach-picoxcell/common.c @@ -11,7 +11,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_platform.h> -#include <linux/dw_apb_timer.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -80,7 +79,6 @@ static void picoxcell_wdt_restart(char mode, const char *cmd) DT_MACHINE_START(PICOXCELL, "Picochip picoXcell") .map_io = picoxcell_map_io, - .init_time = dw_apb_timer_init, .init_machine = picoxcell_init_machine, .dt_compat = picoxcell_dt_match, .restart = picoxcell_wdt_restart, diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig new file mode 100644 index 00000000000..25ee12b21f0 --- /dev/null +++ b/arch/arm/mach-rockchip/Kconfig @@ -0,0 +1,16 @@ +config ARCH_ROCKCHIP + bool "Rockchip RK2928 and RK3xxx SOCs" if ARCH_MULTI_V7 + select PINCTRL + select PINCTRL_ROCKCHIP + select ARCH_REQUIRE_GPIOLIB + select ARM_GIC + select CACHE_L2X0 + select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_SMP + select LOCAL_TIMERS if SMP + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select DW_APB_TIMER_OF + help + Support for Rockchip's Cortex-A9 Single-to-Quad-Core-SoCs + containing the RK2928, RK30xx and RK31xx series. diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile new file mode 100644 index 00000000000..1547d4fc920 --- /dev/null +++ b/arch/arm/mach-rockchip/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c new file mode 100644 index 00000000000..724d2d81f97 --- /dev/null +++ b/arch/arm/mach-rockchip/rockchip.c @@ -0,0 +1,52 @@ +/* + * Device Tree support for Rockchip SoCs + * + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/irqchip.h> +#include <linux/dw_apb_timer.h> +#include <linux/clk-provider.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/hardware/cache-l2x0.h> + +static void __init rockchip_timer_init(void) +{ + of_clk_init(NULL); + clocksource_of_init(); +} + +static void __init rockchip_dt_init(void) +{ + l2x0_of_init(0, ~0UL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const rockchip_board_dt_compat[] = { + "rockchip,rk2928", + "rockchip,rk3066a", + "rockchip,rk3066b", + "rockchip,rk3188", + NULL, +}; + +DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") + .init_machine = rockchip_dt_init, + .init_time = rockchip_timer_init, + .dt_compat = rockchip_board_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index ab1700ec8e6..b7e09467152 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c @@ -35,121 +35,95 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { [DMACH_XD0] = { .name = "xdreq0", .channels = MAP(S3C2412_DMAREQSEL_XDREQ0), - .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ0), }, [DMACH_XD1] = { .name = "xdreq1", .channels = MAP(S3C2412_DMAREQSEL_XDREQ1), - .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ1), }, [DMACH_SDI] = { .name = "sdi", .channels = MAP(S3C2412_DMAREQSEL_SDI), - .channels_rx = MAP(S3C2412_DMAREQSEL_SDI), }, - [DMACH_SPI0] = { - .name = "spi0", + [DMACH_SPI0_RX] = { + .name = "spi0-rx", + .channels = MAP(S3C2412_DMAREQSEL_SPI0RX), + }, + [DMACH_SPI0_TX] = { + .name = "spi0-tx", .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), - .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX), }, - [DMACH_SPI1] = { - .name = "spi1", + [DMACH_SPI1_RX] = { + .name = "spi1-rx", + .channels = MAP(S3C2412_DMAREQSEL_SPI1RX), + }, + [DMACH_SPI1_TX] = { + .name = "spi1-tx", .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), - .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX), }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_0), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0), }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_0), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0), }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_0), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0), }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_1), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1), }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_1), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1), }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_1), - .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1), }, [DMACH_TIMER] = { .name = "timer", .channels = MAP(S3C2412_DMAREQSEL_TIMER), - .channels_rx = MAP(S3C2412_DMAREQSEL_TIMER), }, [DMACH_I2S_IN] = { .name = "i2s-sdi", .channels = MAP(S3C2412_DMAREQSEL_I2SRX), - .channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX), }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels = MAP(S3C2412_DMAREQSEL_I2STX), - .channels_rx = MAP(S3C2412_DMAREQSEL_I2STX), }, [DMACH_USB_EP1] = { .name = "usb-ep1", .channels = MAP(S3C2412_DMAREQSEL_USBEP1), - .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP1), }, [DMACH_USB_EP2] = { .name = "usb-ep2", .channels = MAP(S3C2412_DMAREQSEL_USBEP2), - .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP2), }, [DMACH_USB_EP3] = { .name = "usb-ep3", .channels = MAP(S3C2412_DMAREQSEL_USBEP3), - .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP3), }, [DMACH_USB_EP4] = { .name = "usb-ep4", .channels = MAP(S3C2412_DMAREQSEL_USBEP4), - .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP4), }, }; -static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map, - enum dma_data_direction dir) -{ - unsigned long chsel; - - if (dir == DMA_FROM_DEVICE) - chsel = map->channels_rx[0]; - else - chsel = map->channels[0]; - - chsel &= ~DMA_CH_VALID; - chsel |= S3C2412_DMAREQSEL_HW; - - writel(chsel, chan->regs + S3C2412_DMA_DMAREQSEL); -} - static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map) { - s3c2412_dma_direction(chan, map, chan->source); + unsigned long chsel = map->channels[0] & (~DMA_CH_VALID); + writel(chsel | S3C2412_DMAREQSEL_HW, + chan->regs + S3C2412_DMA_DMAREQSEL); } static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { .select = s3c2412_dma_select, - .direction = s3c2412_dma_direction, .dcon_mask = 0, .map = s3c2412_dma_mappings, .map_size = ARRAY_SIZE(s3c2412_dma_mappings), diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 5fe3539dc2b..95b9f759fe9 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -128,7 +128,8 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { static void s3c2443_dma_select(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map) { - writel(map->channels[0] | S3C2443_DMAREQSEL_HW, + unsigned long chsel = map->channels[0] & (~DMA_CH_VALID); + writel(chsel | S3C2443_DMAREQSEL_HW, chan->regs + S3C2443_DMA_DMAREQSEL); } diff --git a/arch/arm/mach-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c index aab64909e9a..4a65cba3295 100644 --- a/arch/arm/mach-s3c24xx/dma.c +++ b/arch/arm/mach-s3c24xx/dma.c @@ -1159,9 +1159,6 @@ int s3c2410_dma_devconfig(enum dma_ch channel, return -EINVAL; } - if (dma_sel.direction != NULL) - (dma_sel.direction)(chan, chan->map, source); - return 0; } diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 1a517e2fe44..65e1547678b 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -36,10 +36,13 @@ config ARCH_R8A7740 select RENESAS_INTC_IRQPIN config ARCH_R8A7778 - bool "R-Car M1 (R8A77780)" + bool "R-Car M1A (R8A77781)" + select ARCH_WANT_OPTIONAL_GPIOLIB select CPU_V7 select SH_CLK_CPG select ARM_GIC + select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_OHCI config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" @@ -68,27 +71,6 @@ config ARCH_EMEV2 comment "SH-Mobile Board Type" -config MACH_AP4EVB - bool "AP4EVB board" - depends on ARCH_SH7372 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SH_LCD_MIPI_DSI - select SND_SOC_AK4642 if SND_SIMPLE_CARD - -choice - prompt "AP4EVB LCD panel selection" - default AP4EVB_QHD - depends on MACH_AP4EVB - -config AP4EVB_QHD - bool "MIPI-DSI QHD (960x540)" - -config AP4EVB_WVGA - bool "Parallel WVGA (800x480)" - -endchoice - config MACH_AG5EVM bool "AG5EVM board" depends on ARCH_SH73A0 @@ -115,12 +97,6 @@ config MACH_KOTA2 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_BONITO - bool "bonito board" - depends on ARCH_R8A7740 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - config MACH_ARMADILLO800EVA bool "Armadillo-800 EVA board" depends on ARCH_R8A7740 @@ -169,6 +145,8 @@ config MACH_KZM9D config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR select SND_SOC_AK4642 if SND_SIMPLE_CARD @@ -194,37 +172,6 @@ config CPU_HAS_INTEVT bool default y -menu "Memory configuration" - -config MEMORY_START - hex "Physical memory start address" - default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \ - MACH_MACKEREL || MACH_BONITO || \ - MACH_ARMADILLO800EVA || MACH_APE6EVM || \ - MACH_LAGER - default "0x41000000" if MACH_KOTA2 - default "0x00000000" - ---help--- - Tweak this only when porting to a new machine which does not - already have a defconfig. Changing it from the known correct - value on any of the known systems will only lead to disaster. - -config MEMORY_SIZE - hex "Physical memory size" - default "0x80000000" if MACH_LAGER - default "0x40000000" if MACH_APE6EVM - default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \ - MACH_ARMADILLO800EVA - default "0x1e000000" if MACH_KOTA2 - default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL - default "0x04000000" - help - This sets the default memory size assumed by your kernel. It can - be overridden as normal by the 'mem=' argument on the kernel command - line. - -endmenu - menu "Timer and clock configuration" config SHMOBILE_TIMER_HZ diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 068f1dadc46..76f1639c594 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -35,12 +35,10 @@ obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o # Board objects -obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_KOTA2) += board-kota2.o -obj-$(CONFIG_MACH_BONITO) += board-bonito.o obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 498efd99338..84c6868580f 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -1,6 +1,20 @@ -__ZRELADDR := $(shell /bin/bash -c 'printf "0x%08x" \ - $$[$(CONFIG_MEMORY_START) + 0x8000]') +# per-board load address for uImage +loadaddr-y := +loadaddr-$(CONFIG_MACH_AG5EVM) += 0x40008000 +loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000 +loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000 +loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 +loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 +loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000 +loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000 +loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 +loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 +loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 +loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000 +loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000 +loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000 +__ZRELADDR := $(sort $(loadaddr-y)) zreladdr-y += $(__ZRELADDR) # Unsupported legacy stuff diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c deleted file mode 100644 index 45f78cadec1..00000000000 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ /dev/null @@ -1,1332 +0,0 @@ -/* - * AP4EVB board support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/clk.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mfd/tmio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mmc/sh_mmcif.h> -#include <linux/i2c.h> -#include <linux/i2c/tsc2007.h> -#include <linux/io.h> -#include <linux/pinctrl/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/smsc911x.h> -#include <linux/sh_intc.h> -#include <linux/sh_clk.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/leds.h> -#include <linux/input/sh_keysc.h> -#include <linux/usb/r8a66597.h> -#include <linux/pm_clock.h> -#include <linux/dma-mapping.h> - -#include <media/sh_mobile_ceu.h> -#include <media/sh_mobile_csi2.h> -#include <media/soc_camera.h> - -#include <sound/sh_fsi.h> -#include <sound/simple_card.h> - -#include <video/sh_mobile_hdmi.h> -#include <video/sh_mobile_lcdc.h> -#include <video/sh_mipi_dsi.h> - -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/sh7372.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/setup.h> - -#include "sh-gpio.h" - -/* - * Address Interface BusWidth note - * ------------------------------------------------------------------ - * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON - * 0x0800_0000 user area - - * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF - * 0x1400_0000 Ether (LAN9220) 16bit - * 0x1600_0000 user area - cannot use with NAND - * 0x1800_0000 user area - - * 0x1A00_0000 - - * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit - */ - -/* - * NOR Flash ROM - * - * SW1 | SW2 | SW7 | NOR Flash ROM - * bit1 | bit1 bit2 | bit1 | Memory allocation - * ------+------------+------+------------------ - * OFF | ON OFF | ON | Area 0 - * OFF | ON OFF | OFF | Area 4 - */ - -/* - * NAND Flash ROM - * - * SW1 | SW2 | SW7 | NAND Flash ROM - * bit1 | bit1 bit2 | bit2 | Memory allocation - * ------+------------+------+------------------ - * OFF | ON OFF | ON | FCE 0 - * OFF | ON OFF | OFF | FCE 1 - */ - -/* - * SMSC 9220 - * - * SW1 SMSC 9220 - * ----------------------- - * ON access disable - * OFF access enable - */ - -/* - * LCD / IRQ / KEYSC / IrDA - * - * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen) - * LCD = 2nd LCDC (WVGA) - * - * | SW43 | - * SW3 | ON | OFF | - * -------------+-----------------------+---------------+ - * ON | KEY / IrDA | LCD | - * OFF | KEY / IrDA / IRQ | IRQ | - * - * - * QHD / WVGA display - * - * You can choice display type on menuconfig. - * Then, check above dip-switch. - */ - -/* - * USB - * - * J7 : 1-2 MAX3355E VBUS - * 2-3 DC 5.0V - * - * S39: bit2: off - */ - -/* - * FSI/FSMI - * - * SW41 : ON : SH-Mobile AP4 Audio Mode - * : OFF : Bluetooth Audio Mode - * - * it needs amixer settings for playing - * - * amixer set "Headphone Enable" on - */ - -/* - * MMC0/SDHI1 (CN7) - * - * J22 : select card voltage - * 1-2 pin : 1.8v - * 2-3 pin : 3.3v - * - * SW1 | SW33 - * | bit1 | bit2 | bit3 | bit4 - * ------------+------+------+------+------- - * MMC0 OFF | OFF | ON | ON | X - * SDHI1 OFF | ON | X | OFF | ON - * - * voltage lebel - * CN7 : 1.8v - * CN12: 3.3v - */ - -/* Dummy supplies, where voltage doesn't matter */ -static struct regulator_consumer_supply fixed1v8_power_consumers[] = -{ - /* J22 default position: 1.8V */ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), -}; - -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), -}; - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), -}; - -/* MTD */ -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x20000000, /* CS0 shadow instead of regular CS0 */ - .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */ - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* SMSC 9220 */ -static struct resource smc911x_resources[] = { - { - .start = 0x14000000, - .end = 0x16000000 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = evt2irq(0x02c0) /* IRQ6A */, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config smsc911x_info = { - .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, -}; - -static struct platform_device smc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smc911x_resources), - .resource = smc911x_resources, - .dev = { - .platform_data = &smsc911x_info, - }, -}; - -/* - * The card detect pin of the top SD/MMC slot (CN7) is active low and is - * connected to GPIO A22 of SH7372 (GPIO 41). - */ -static int slot_cn7_get_cd(struct platform_device *pdev) -{ - return !gpio_get_value(41); -} -/* MERAM */ -static struct sh_mobile_meram_info meram_info = { - .addr_mode = SH_MOBILE_MERAM_MODE1, -}; - -static struct resource meram_resources[] = { - [0] = { - .name = "regs", - .start = 0xe8000000, - .end = 0xe807ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "meram", - .start = 0xe8080000, - .end = 0xe81fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device meram_device = { - .name = "sh_mobile_meram", - .id = 0, - .num_resources = ARRAY_SIZE(meram_resources), - .resource = meram_resources, - .dev = { - .platform_data = &meram_info, - }, -}; - -/* SH_MMCIF */ -static struct resource sh_mmcif_resources[] = { - [0] = { - .name = "MMCIF", - .start = 0xE6BD0000, - .end = 0xE6BD00FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - /* MMC ERR */ - .start = evt2irq(0x1ac0), - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* MMC NOR */ - .start = evt2irq(0x1ae0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct sh_mmcif_plat_data sh_mmcif_plat = { - .sup_pclk = 0, - .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NEEDS_POLL, - .get_cd = slot_cn7_get_cd, - .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, - .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, -}; - -static struct platform_device sh_mmcif_device = { - .name = "sh_mmcif", - .id = 0, - .dev = { - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - .platform_data = &sh_mmcif_plat, - }, - .num_resources = ARRAY_SIZE(sh_mmcif_resources), - .resource = sh_mmcif_resources, -}; - -/* SDHI0 */ -static struct sh_mobile_sdhi_info sdhi0_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_caps = MMC_CAP_SDIO_IRQ, -}; - -static struct resource sdhi0_resources[] = { - [0] = { - .name = "SDHI0", - .start = 0xe6850000, - .end = 0xe68500ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi0_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi0_resources), - .resource = sdhi0_resources, - .id = 0, - .dev = { - .platform_data = &sdhi0_info, - }, -}; - -/* SDHI1 */ -static struct sh_mobile_sdhi_info sdhi1_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_ocr_mask = MMC_VDD_165_195, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_NEEDS_POLL | MMC_CAP_SDIO_IRQ, - .get_cd = slot_cn7_get_cd, -}; - -static struct resource sdhi1_resources[] = { - [0] = { - .name = "SDHI1", - .start = 0xe6860000, - .end = 0xe68600ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi1_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi1_resources), - .resource = sdhi1_resources, - .id = 1, - .dev = { - .platform_data = &sdhi1_info, - }, -}; - -/* USB1 */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(IOMEM(0xE68B0008)) | 0x600, IOMEM(0xE68B0008)); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS", - .start = 0xE68B0000, - .end = 0xE68B00E6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* - * QHD display - */ -#ifdef CONFIG_AP4EVB_QHD - -/* KEYSC (Needs SW43 set to ON) */ -static struct sh_keysc_info keysc_info = { - .mode = SH_KEYSC_MODE_1, - .scan_timing = 3, - .delay = 2500, - .keycodes = { - KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, - KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, - KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, - KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, - KEY_K, KEY_L, KEY_M, KEY_N, KEY_O, - }, -}; - -static struct resource keysc_resources[] = { - [0] = { - .name = "KEYSC", - .start = 0xe61b0000, - .end = 0xe61b0063, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0be0), /* KEYSC_KEY */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device keysc_device = { - .name = "sh_keysc", - .id = 0, /* "keysc0" clock */ - .num_resources = ARRAY_SIZE(keysc_resources), - .resource = keysc_resources, - .dev = { - .platform_data = &keysc_info, - }, -}; - -/* MIPI-DSI */ -static int sh_mipi_set_dot_clock(struct platform_device *pdev, - void __iomem *base, - int enable) -{ - struct clk *pck = clk_get(&pdev->dev, "dsip_clk"); - - if (IS_ERR(pck)) - return PTR_ERR(pck); - - if (enable) { - /* - * DSIPCLK = 24MHz - * D-PHY = DSIPCLK * ((0x6*2)+1) = 312MHz (see .phyctrl) - * HsByteCLK = D-PHY/8 = 39MHz - * - * X * Y * FPS = - * (544+72+600+16) * (961+8+8+2) * 30 = 36.1MHz - */ - clk_set_rate(pck, clk_round_rate(pck, 24000000)); - clk_enable(pck); - } else { - clk_disable(pck); - } - - clk_put(pck); - - return 0; -} - -static struct resource mipidsi0_resources[] = { - [0] = { - .start = 0xffc60000, - .end = 0xffc63073, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xffc68000, - .end = 0xffc680ef, - .flags = IORESOURCE_MEM, - }, -}; - -static struct sh_mipi_dsi_info mipidsi0_info = { - .data_format = MIPI_RGB888, - .channel = LCDC_CHAN_MAINLCD, - .lane = 2, - .vsynw_offset = 17, - .phyctrl = 0x6 << 8, - .flags = SH_MIPI_DSI_SYNC_PULSES_MODE | - SH_MIPI_DSI_HSbyteCLK, - .set_dot_clock = sh_mipi_set_dot_clock, -}; - -static struct platform_device mipidsi0_device = { - .name = "sh-mipi-dsi", - .num_resources = ARRAY_SIZE(mipidsi0_resources), - .resource = mipidsi0_resources, - .id = 0, - .dev = { - .platform_data = &mipidsi0_info, - }, -}; - -static struct platform_device *qhd_devices[] __initdata = { - &mipidsi0_device, - &keysc_device, -}; -#endif /* CONFIG_AP4EVB_QHD */ - -/* LCDC0 */ -static const struct fb_videomode ap4evb_lcdc_modes[] = { - { -#ifdef CONFIG_AP4EVB_QHD - .name = "R63302(QHD)", - .xres = 544, - .yres = 961, - .left_margin = 72, - .right_margin = 600, - .hsync_len = 16, - .upper_margin = 8, - .lower_margin = 8, - .vsync_len = 2, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, -#else - .name = "WVGA Panel", - .xres = 800, - .yres = 480, - .left_margin = 220, - .right_margin = 110, - .hsync_len = 70, - .upper_margin = 20, - .lower_margin = 5, - .vsync_len = 5, - .sync = 0, -#endif - }, -}; - -static const struct sh_mobile_meram_cfg lcd_meram_cfg = { - .icb[0] = { - .meram_size = 0x40, - }, - .icb[1] = { - .meram_size = 0x40, - }, -}; - -static struct sh_mobile_lcdc_info lcdc_info = { - .meram_dev = &meram_info, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .lcd_modes = ap4evb_lcdc_modes, - .num_modes = ARRAY_SIZE(ap4evb_lcdc_modes), - .meram_cfg = &lcd_meram_cfg, -#ifdef CONFIG_AP4EVB_QHD - .tx_dev = &mipidsi0_device, -#endif - } -}; - -static struct resource lcdc_resources[] = { - [0] = { - .name = "LCDC", - .start = 0xfe940000, /* P4-only space */ - .end = 0xfe943fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x580), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device lcdc_device = { - .name = "sh_mobile_lcdc_fb", - .num_resources = ARRAY_SIZE(lcdc_resources), - .resource = lcdc_resources, - .dev = { - .platform_data = &lcdc_info, - .coherent_dma_mask = ~0, - }, -}; - -/* FSI */ -#define IRQ_FSI evt2irq(0x1840) -static struct sh_fsi_platform_info fsi_info = { - .port_b = { - .flags = SH_FSI_CLK_CPG | - SH_FSI_FMT_SPDIF, - }, -}; - -static struct resource fsi_resources[] = { - [0] = { - .name = "FSI", - .start = 0xFE3C0000, - .end = 0xFE3C0400 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FSI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device fsi_device = { - .name = "sh_fsi2", - .id = -1, - .num_resources = ARRAY_SIZE(fsi_resources), - .resource = fsi_resources, - .dev = { - .platform_data = &fsi_info, - }, -}; - -static struct asoc_simple_card_info fsi2_ak4643_info = { - .name = "AK4643", - .card = "FSI2A-AK4643", - .codec = "ak4642-codec.0-0013", - .platform = "sh_fsi2", - .daifmt = SND_SOC_DAIFMT_LEFT_J, - .cpu_dai = { - .name = "fsia-dai", - .fmt = SND_SOC_DAIFMT_CBS_CFS, - }, - .codec_dai = { - .name = "ak4642-hifi", - .fmt = SND_SOC_DAIFMT_CBM_CFM, - .sysclk = 11289600, - }, -}; - -static struct platform_device fsi_ak4643_device = { - .name = "asoc-simple-card", - .dev = { - .platform_data = &fsi2_ak4643_info, - }, -}; - -/* LCDC1 */ -static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, - unsigned long *parent_freq); - -static struct sh_mobile_hdmi_info hdmi_info = { - .flags = HDMI_SND_SRC_SPDIF, - .clk_optimize_parent = ap4evb_clk_optimize, -}; - -static struct resource hdmi_resources[] = { - [0] = { - .name = "HDMI", - .start = 0xe6be0000, - .end = 0xe6be00ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ - .start = evt2irq(0x17e0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device hdmi_device = { - .name = "sh-mobile-hdmi", - .num_resources = ARRAY_SIZE(hdmi_resources), - .resource = hdmi_resources, - .id = -1, - .dev = { - .platform_data = &hdmi_info, - }, -}; - -static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, - unsigned long *parent_freq) -{ - struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); - long error; - - if (IS_ERR(hdmi_ick)) { - int ret = PTR_ERR(hdmi_ick); - pr_err("Cannot get HDMI ICK: %d\n", ret); - return ret; - } - - error = clk_round_parent(hdmi_ick, target, best_freq, parent_freq, 1, 64); - - clk_put(hdmi_ick); - - return error; -} - -static const struct sh_mobile_meram_cfg hdmi_meram_cfg = { - .icb[0] = { - .meram_size = 0x100, - }, - .icb[1] = { - .meram_size = 0x100, - }, -}; - -static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { - .clock_source = LCDC_CLK_EXTERNAL, - .meram_dev = &meram_info, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .interface_type = RGB24, - .clock_divider = 1, - .flags = LCDC_FLAGS_DWPOL, - .meram_cfg = &hdmi_meram_cfg, - .tx_dev = &hdmi_device, - } -}; - -static struct resource lcdc1_resources[] = { - [0] = { - .name = "LCDC1", - .start = 0xfe944000, - .end = 0xfe947fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x1780), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device lcdc1_device = { - .name = "sh_mobile_lcdc_fb", - .num_resources = ARRAY_SIZE(lcdc1_resources), - .resource = lcdc1_resources, - .id = 1, - .dev = { - .platform_data = &sh_mobile_lcdc1_info, - .coherent_dma_mask = ~0, - }, -}; - -static struct asoc_simple_card_info fsi2_hdmi_info = { - .name = "HDMI", - .card = "FSI2B-HDMI", - .codec = "sh-mobile-hdmi", - .platform = "sh_fsi2", - .cpu_dai = { - .name = "fsib-dai", - .fmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF, - }, - .codec_dai = { - .name = "sh_mobile_hdmi-hifi", - }, -}; - -static struct platform_device fsi_hdmi_device = { - .name = "asoc-simple-card", - .id = 1, - .dev = { - .platform_data = &fsi2_hdmi_info, - }, -}; - -static struct gpio_led ap4evb_leds[] = { - { - .name = "led4", - .gpio = 185, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "led2", - .gpio = 186, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "led3", - .gpio = 187, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "led1", - .gpio = 188, - .default_state = LEDS_GPIO_DEFSTATE_ON, - } -}; - -static struct gpio_led_platform_data ap4evb_leds_pdata = { - .num_leds = ARRAY_SIZE(ap4evb_leds), - .leds = ap4evb_leds, -}; - -static struct platform_device leds_device = { - .name = "leds-gpio", - .id = 0, - .dev = { - .platform_data = &ap4evb_leds_pdata, - }, -}; - -static struct i2c_board_info imx074_info = { - I2C_BOARD_INFO("imx074", 0x1a), -}; - -static struct soc_camera_link imx074_link = { - .bus_id = 0, - .board_info = &imx074_info, - .i2c_adapter_id = 0, - .module_name = "imx074", -}; - -static struct platform_device ap4evb_camera = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &imx074_link, - }, -}; - -static struct sh_csi2_client_config csi2_clients[] = { - { - .phy = SH_CSI2_PHY_MAIN, - .lanes = 0, /* default: 2 lanes */ - .channel = 0, - .pdev = &ap4evb_camera, - }, -}; - -static struct sh_csi2_pdata csi2_info = { - .type = SH_CSI2C, - .clients = csi2_clients, - .num_clients = ARRAY_SIZE(csi2_clients), - .flags = SH_CSI2_ECC | SH_CSI2_CRC, -}; - -static struct resource csi2_resources[] = { - [0] = { - .name = "CSI2", - .start = 0xffc90000, - .end = 0xffc90fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x17a0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct sh_mobile_ceu_companion csi2 = { - .id = 0, - .num_resources = ARRAY_SIZE(csi2_resources), - .resource = csi2_resources, - .platform_data = &csi2_info, -}; - -static struct sh_mobile_ceu_info sh_mobile_ceu_info = { - .flags = SH_CEU_FLAG_USE_8BIT_BUS, - .max_width = 8188, - .max_height = 8188, - .csi2 = &csi2, -}; - -static struct resource ceu_resources[] = { - [0] = { - .name = "CEU", - .start = 0xfe910000, - .end = 0xfe91009f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x880), - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* place holder for contiguous memory */ - }, -}; - -static struct platform_device ceu_device = { - .name = "sh_mobile_ceu", - .id = 0, /* "ceu0" clock */ - .num_resources = ARRAY_SIZE(ceu_resources), - .resource = ceu_resources, - .dev = { - .platform_data = &sh_mobile_ceu_info, - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device *ap4evb_devices[] __initdata = { - &leds_device, - &nor_flash_device, - &smc911x_device, - &sdhi0_device, - &sdhi1_device, - &usb1_host_device, - &fsi_device, - &fsi_ak4643_device, - &fsi_hdmi_device, - &sh_mmcif_device, - &hdmi_device, - &lcdc_device, - &lcdc1_device, - &ceu_device, - &ap4evb_camera, - &meram_device, -}; - -static void __init hdmi_init_pm_clock(void) -{ - struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); - int ret; - long rate; - - if (IS_ERR(hdmi_ick)) { - ret = PTR_ERR(hdmi_ick); - pr_err("Cannot get HDMI ICK: %d\n", ret); - goto out; - } - - ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk); - if (ret < 0) { - pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount); - goto out; - } - - pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk)); - - rate = clk_round_rate(&sh7372_pllc2_clk, 594000000); - if (rate < 0) { - pr_err("Cannot get suitable rate: %ld\n", rate); - ret = rate; - goto out; - } - - ret = clk_set_rate(&sh7372_pllc2_clk, rate); - if (ret < 0) { - pr_err("Cannot set rate %ld: %d\n", rate, ret); - goto out; - } - - pr_debug("PLLC2 set frequency %lu\n", rate); - - ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) - pr_err("Cannot set HDMI parent: %d\n", ret); - -out: - if (!IS_ERR(hdmi_ick)) - clk_put(hdmi_ick); -} - -/* TouchScreen */ -#ifdef CONFIG_AP4EVB_QHD -# define GPIO_TSC_IRQ GPIO_FN_IRQ28_123 -# define GPIO_TSC_PORT 123 -#else /* WVGA */ -# define GPIO_TSC_IRQ GPIO_FN_IRQ7_40 -# define GPIO_TSC_PORT 40 -#endif - -#define IRQ28 evt2irq(0x3380) /* IRQ28A */ -#define IRQ7 evt2irq(0x02e0) /* IRQ7A */ -static int ts_get_pendown_state(void) -{ - int val; - - gpio_free(GPIO_TSC_IRQ); - - gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL); - - val = gpio_get_value(GPIO_TSC_PORT); - - gpio_request(GPIO_TSC_IRQ, NULL); - - return !val; -} - -static int ts_init(void) -{ - gpio_request(GPIO_TSC_IRQ, NULL); - - return 0; -} - -static struct tsc2007_platform_data tsc2007_info = { - .model = 2007, - .x_plate_ohms = 180, - .get_pendown_state = ts_get_pendown_state, - .init_platform_hw = ts_init, -}; - -static struct i2c_board_info tsc_device = { - I2C_BOARD_INFO("tsc2007", 0x48), - .type = "tsc2007", - .platform_data = &tsc2007_info, - /*.irq is selected on ap4evb_init */ -}; - -/* I2C */ -static struct i2c_board_info i2c0_devices[] = { - { - I2C_BOARD_INFO("ak4643", 0x13), - }, -}; - -static struct i2c_board_info i2c1_devices[] = { - { - I2C_BOARD_INFO("r2025sd", 0x32), - }, -}; - - -static const struct pinctrl_map ap4evb_pinctrl_map[] = { - /* MMCIF */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", - "mmc0_data8_0", "mmc0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", - "mmc0_ctrl_0", "mmc0"), - /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", - "sdhi0_cd", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", - "sdhi0_wp", "sdhi0"), - /* SDHI1 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", - "sdhi1_data4", "sdhi1"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", - "sdhi1_ctrl", "sdhi1"), -}; - -#define GPIO_PORT9CR IOMEM(0xE6051009) -#define GPIO_PORT10CR IOMEM(0xE605100A) -#define USCCR1 IOMEM(0xE6058144) -static void __init ap4evb_init(void) -{ - struct pm_domain_device domain_devices[] = { - { "A4LC", &lcdc1_device, }, - { "A4LC", &lcdc_device, }, - { "A4MP", &fsi_device, }, - { "A3SP", &sh_mmcif_device, }, - { "A3SP", &sdhi0_device, }, - { "A3SP", &sdhi1_device, }, - { "A4R", &ceu_device, }, - }; - u32 srcr4; - struct clk *clk; - - regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, - ARRAY_SIZE(fixed1v8_power_consumers), 1800000); - regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - - /* External clock source */ - clk_set_rate(&sh7372_dv_clki_clk, 27000000); - - pinctrl_register_mappings(ap4evb_pinctrl_map, - ARRAY_SIZE(ap4evb_pinctrl_map)); - sh7372_pinmux_init(); - - /* enable SCIFA0 */ - gpio_request(GPIO_FN_SCIFA0_TXD, NULL); - gpio_request(GPIO_FN_SCIFA0_RXD, NULL); - - /* enable SMSC911X */ - gpio_request(GPIO_FN_CS5A, NULL); - gpio_request(GPIO_FN_IRQ6_39, NULL); - - /* enable Debug switch (S6) */ - gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL); - gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL); - gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL); - gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL); - - /* USB enable */ - gpio_request(GPIO_FN_VBUS0_1, NULL); - gpio_request(GPIO_FN_IDIN_1_18, NULL); - gpio_request(GPIO_FN_PWEN_1_115, NULL); - gpio_request(GPIO_FN_OVCN_1_114, NULL); - gpio_request(GPIO_FN_EXTLP_1, NULL); - gpio_request(GPIO_FN_OVCN2_1, NULL); - - /* setup USB phy */ - __raw_writew(0x8a0a, IOMEM(0xE6058130)); /* USBCR4 */ - - /* enable FSI2 port A (ak4643) */ - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAISLD, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); - gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ - - gpio_request(9, NULL); - gpio_request(10, NULL); - gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */ - gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ - - /* card detect pin for MMC slot (CN7) */ - gpio_request_one(41, GPIOF_IN, NULL); - - /* setup FSI2 port B (HDMI) */ - gpio_request(GPIO_FN_FSIBCK, NULL); - __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ - - /* set SPU2 clock to 119.6 MHz */ - clk = clk_get(NULL, "spu_clk"); - if (!IS_ERR(clk)) { - clk_set_rate(clk, clk_round_rate(clk, 119600000)); - clk_put(clk); - } - - /* - * set irq priority, to avoid sound chopping - * when NFS rootfs is used - * FSI(3) > SMSC911X(2) - */ - intc_set_priority(IRQ_FSI, 3); - - i2c_register_board_info(0, i2c0_devices, - ARRAY_SIZE(i2c0_devices)); - - i2c_register_board_info(1, i2c1_devices, - ARRAY_SIZE(i2c1_devices)); - -#ifdef CONFIG_AP4EVB_QHD - - /* - * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and - * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON. - */ - - /* enable KEYSC */ - gpio_request(GPIO_FN_KEYOUT0, NULL); - gpio_request(GPIO_FN_KEYOUT1, NULL); - gpio_request(GPIO_FN_KEYOUT2, NULL); - gpio_request(GPIO_FN_KEYOUT3, NULL); - gpio_request(GPIO_FN_KEYOUT4, NULL); - gpio_request(GPIO_FN_KEYIN0_136, NULL); - gpio_request(GPIO_FN_KEYIN1_135, NULL); - gpio_request(GPIO_FN_KEYIN2_134, NULL); - gpio_request(GPIO_FN_KEYIN3_133, NULL); - gpio_request(GPIO_FN_KEYIN4, NULL); - - /* enable TouchScreen */ - irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW); - - tsc_device.irq = IRQ28; - i2c_register_board_info(1, &tsc_device, 1); - - /* LCDC0 */ - lcdc_info.clock_source = LCDC_CLK_PERIPHERAL; - lcdc_info.ch[0].interface_type = RGB24; - lcdc_info.ch[0].clock_divider = 1; - lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL; - lcdc_info.ch[0].panel_cfg.width = 44; - lcdc_info.ch[0].panel_cfg.height = 79; - - platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices)); - -#else - /* - * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and - * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF. - */ - - gpio_request(GPIO_FN_LCDD17, NULL); - gpio_request(GPIO_FN_LCDD16, NULL); - gpio_request(GPIO_FN_LCDD15, NULL); - gpio_request(GPIO_FN_LCDD14, NULL); - gpio_request(GPIO_FN_LCDD13, NULL); - gpio_request(GPIO_FN_LCDD12, NULL); - gpio_request(GPIO_FN_LCDD11, NULL); - gpio_request(GPIO_FN_LCDD10, NULL); - gpio_request(GPIO_FN_LCDD9, NULL); - gpio_request(GPIO_FN_LCDD8, NULL); - gpio_request(GPIO_FN_LCDD7, NULL); - gpio_request(GPIO_FN_LCDD6, NULL); - gpio_request(GPIO_FN_LCDD5, NULL); - gpio_request(GPIO_FN_LCDD4, NULL); - gpio_request(GPIO_FN_LCDD3, NULL); - gpio_request(GPIO_FN_LCDD2, NULL); - gpio_request(GPIO_FN_LCDD1, NULL); - gpio_request(GPIO_FN_LCDD0, NULL); - gpio_request(GPIO_FN_LCDDISP, NULL); - gpio_request(GPIO_FN_LCDDCK, NULL); - - gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */ - gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ - - lcdc_info.clock_source = LCDC_CLK_BUS; - lcdc_info.ch[0].interface_type = RGB18; - lcdc_info.ch[0].clock_divider = 3; - lcdc_info.ch[0].flags = 0; - lcdc_info.ch[0].panel_cfg.width = 152; - lcdc_info.ch[0].panel_cfg.height = 91; - - /* enable TouchScreen */ - irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); - - tsc_device.irq = IRQ7; - i2c_register_board_info(0, &tsc_device, 1); -#endif /* CONFIG_AP4EVB_QHD */ - - /* CEU */ - - /* - * TODO: reserve memory for V4L2 DMA buffers, when a suitable API - * becomes available - */ - - /* MIPI-CSI stuff */ - gpio_request(GPIO_FN_VIO_CKO, NULL); - - clk = clk_get(NULL, "vck1_clk"); - if (!IS_ERR(clk)) { - clk_set_rate(clk, clk_round_rate(clk, 13000000)); - clk_enable(clk); - clk_put(clk); - } - - sh7372_add_standard_devices(); - - /* HDMI */ - gpio_request(GPIO_FN_HDMI_HPD, NULL); - gpio_request(GPIO_FN_HDMI_CEC, NULL); - - /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ -#define SRCR4 IOMEM(0xe61580bc) - srcr4 = __raw_readl(SRCR4); - __raw_writel(srcr4 | (1 << 13), SRCR4); - udelay(50); - __raw_writel(srcr4 & ~(1 << 13), SRCR4); - - platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); - - rmobile_add_devices_to_domains(domain_devices, - ARRAY_SIZE(domain_devices)); - - hdmi_init_pm_clock(); - sh7372_pm_init(); - pm_clk_add(&fsi_device.dev, "spu2"); - pm_clk_add(&lcdc1_device.dev, "hdmi"); -} - -MACHINE_START(AP4EVB, "ap4evb") - .map_io = sh7372_map_io, - .init_early = sh7372_add_early_devices, - .init_irq = sh7372_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = ap4evb_init, - .init_late = sh7372_pm_init_late, - .init_time = sh7372_earlytimer_init, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index b85b2882dbd..44a621505ee 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -584,7 +584,7 @@ static struct regulator_init_data vcc_sdhi0_init_data = { static struct fixed_voltage_config vcc_sdhi0_info = { .supply_name = "SDHI0 Vcc", .microvolts = 3300000, - .gpio = GPIO_PORT75, + .gpio = 75, .enable_high = 1, .init_data = &vcc_sdhi0_init_data, }; @@ -615,7 +615,7 @@ static struct regulator_init_data vccq_sdhi0_init_data = { }; static struct gpio vccq_sdhi0_gpios[] = { - {GPIO_PORT17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, + {17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, }; static struct gpio_regulator_state vccq_sdhi0_states[] = { @@ -626,7 +626,7 @@ static struct gpio_regulator_state vccq_sdhi0_states[] = { static struct gpio_regulator_config vccq_sdhi0_info = { .supply_name = "vqmmc", - .enable_gpio = GPIO_PORT74, + .enable_gpio = 74, .enable_high = 1, .enabled_at_boot = 0, @@ -664,7 +664,7 @@ static struct regulator_init_data vcc_sdhi1_init_data = { static struct fixed_voltage_config vcc_sdhi1_info = { .supply_name = "SDHI1 Vcc", .microvolts = 3300000, - .gpio = GPIO_PORT16, + .gpio = 16, .enable_high = 1, .init_data = &vcc_sdhi1_init_data, }; @@ -693,7 +693,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = { .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, - .cd_gpio = GPIO_PORT167, + .cd_gpio = 167, }; static struct resource sdhi0_resources[] = { @@ -736,7 +736,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { MMC_CAP_POWER_OFF_CARD, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, /* Port72 cannot generate IRQs, will be used in polling mode. */ - .cd_gpio = GPIO_PORT72, + .cd_gpio = 72, }; static struct resource sdhi1_resources[] = { @@ -1046,6 +1046,35 @@ static struct platform_device *eva_devices[] __initdata = { }; static const struct pinctrl_map eva_pinctrl_map[] = { + /* CEU0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_data_0_7", "ceu0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_clk_0", "ceu0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_sync", "ceu0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_field", "ceu0"), + /* FSIA */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_mclk_out", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_data_in_1", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_data_out_0", "fsia"), + /* FSIB */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740", + "fsib_mclk_in", "fsib"), + /* GETHER */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740", + "gether_mii", "gether"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740", + "gether_int", "gether"), + /* HDMI */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740", + "hdmi", "hdmi"), /* LCD0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", "lcd0_data24_0", "lcd0"), @@ -1058,6 +1087,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = { "mmc0_data8_1", "mmc0"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", "mmc0_ctrl_1", "mmc0"), + /* SCIFA1 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740", + "scifa1_data", "scifa1"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", "sdhi0_data4", "sdhi0"), @@ -1065,6 +1097,12 @@ static const struct pinctrl_map eva_pinctrl_map[] = { "sdhi0_ctrl", "sdhi0"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", "sdhi0_wp", "sdhi0"), + /* ST1232 */ + PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740", + "intc_irq10", "intc"), + /* USBHS */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740", + "intc_irq7_1", "intc"), }; static void __init eva_clock_init(void) @@ -1119,40 +1157,14 @@ static void __init eva_init(void) r8a7740_pinmux_init(); r8a7740_meram_workaround(); - /* SCIFA1 */ - gpio_request(GPIO_FN_SCIFA1_RXD, NULL); - gpio_request(GPIO_FN_SCIFA1_TXD, NULL); - /* LCDC0 */ - gpio_request(GPIO_FN_LCDC0_SELECT, NULL); - gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ /* Touchscreen */ - gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ + gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ /* GETHER */ - gpio_request(GPIO_FN_ET_CRS, NULL); - gpio_request(GPIO_FN_ET_MDC, NULL); - gpio_request(GPIO_FN_ET_MDIO, NULL); - gpio_request(GPIO_FN_ET_TX_ER, NULL); - gpio_request(GPIO_FN_ET_RX_ER, NULL); - gpio_request(GPIO_FN_ET_ERXD0, NULL); - gpio_request(GPIO_FN_ET_ERXD1, NULL); - gpio_request(GPIO_FN_ET_ERXD2, NULL); - gpio_request(GPIO_FN_ET_ERXD3, NULL); - gpio_request(GPIO_FN_ET_TX_CLK, NULL); - gpio_request(GPIO_FN_ET_TX_EN, NULL); - gpio_request(GPIO_FN_ET_ETXD0, NULL); - gpio_request(GPIO_FN_ET_ETXD1, NULL); - gpio_request(GPIO_FN_ET_ETXD2, NULL); - gpio_request(GPIO_FN_ET_ETXD3, NULL); - gpio_request(GPIO_FN_ET_PHY_INT, NULL); - gpio_request(GPIO_FN_ET_COL, NULL); - gpio_request(GPIO_FN_ET_RX_DV, NULL); - gpio_request(GPIO_FN_ET_RX_CLK, NULL); - gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ /* USB */ @@ -1163,34 +1175,17 @@ static void __init eva_init(void) } else { /* USB Func */ /* - * A1 chip has 2 IRQ7 pin and it was controled by MSEL register. - * OTOH, usbhs interrupt needs its value (HI/LOW) to decide - * USB connection/disconnection (usbhsf_get_vbus()). - * This means we needs to select GPIO_FN_IRQ7_PORT209 first, - * and select GPIO 209 here + * The USBHS interrupt handlers needs to read the IRQ pin value + * (HI/LOW) to diffentiate USB connection and disconnection + * events (usbhsf_get_vbus()). We thus need to select both the + * intc_irq7_1 pin group and GPIO 209 here. */ - gpio_request(GPIO_FN_IRQ7_PORT209, NULL); gpio_request_one(209, GPIOF_IN, NULL); platform_device_register(&usbhsf_device); usb = &usbhsf_device; } - /* CEU0 */ - gpio_request(GPIO_FN_VIO0_D7, NULL); - gpio_request(GPIO_FN_VIO0_D6, NULL); - gpio_request(GPIO_FN_VIO0_D5, NULL); - gpio_request(GPIO_FN_VIO0_D4, NULL); - gpio_request(GPIO_FN_VIO0_D3, NULL); - gpio_request(GPIO_FN_VIO0_D2, NULL); - gpio_request(GPIO_FN_VIO0_D1, NULL); - gpio_request(GPIO_FN_VIO0_D0, NULL); - gpio_request(GPIO_FN_VIO0_CLK, NULL); - gpio_request(GPIO_FN_VIO0_HD, NULL); - gpio_request(GPIO_FN_VIO0_VD, NULL); - gpio_request(GPIO_FN_VIO0_FIELD, NULL); - gpio_request(GPIO_FN_VIO_CKO, NULL); - /* CON1/CON15 Camera */ gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ @@ -1198,24 +1193,11 @@ static void __init eva_init(void) gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ /* FSI-WM8978 */ - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAOMC, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); - gpio_request(GPIO_FN_FSIAISLD_PORT5, NULL); - gpio_request(7, NULL); gpio_request(8, NULL); gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */ gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */ - /* FSI-HDMI */ - gpio_request(GPIO_FN_FSIBCK, NULL); - - /* HDMI */ - gpio_request(GPIO_FN_HDMI_HPD, NULL); - gpio_request(GPIO_FN_HDMI_CEC, NULL); - /* * CAUTION * diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 38e5e50fb31..7ed2401b899 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -18,6 +18,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/pinctrl/machine.h> #include <linux/platform_device.h> #include <linux/smsc911x.h> #include <mach/common.h> @@ -37,6 +38,20 @@ static struct resource smsc911x_resources[] = { DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ }; +static struct rcar_phy_platform_data usb_phy_platform_data __initdata; + +static const struct pinctrl_map bockw_pinctrl_map[] = { + /* SCIF0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", + "scif0_data_a", "scif0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", + "scif0_ctrl", "scif0"), + PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", + "usb0", "usb0"), + PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", + "usb1", "usb1"), +}; + #define IRQ0MR 0x30 static void __init bockw_init(void) { @@ -45,6 +60,11 @@ static void __init bockw_init(void) r8a7778_clock_init(); r8a7778_init_irq_extpin(1); r8a7778_add_standard_devices(); + r8a7778_add_usb_phy_device(&usb_phy_platform_data); + + pinctrl_register_mappings(bockw_pinctrl_map, + ARRAY_SIZE(bockw_pinctrl_map)); + r8a7778_pinmux_init(); fpga = ioremap_nocache(0x18200000, SZ_1M); if (fpga) { @@ -78,4 +98,5 @@ DT_MACHINE_START(BOCKW_DT, "bockw") .init_machine = bockw_init, .init_time = shmobile_timer_init, .dt_compat = bockw_boards_compat_dt, + .init_late = r8a7778_init_late, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c deleted file mode 100644 index 70d992c540a..00000000000 --- a/arch/arm/mach-shmobile/board-bonito.c +++ /dev/null @@ -1,495 +0,0 @@ -/* - * bonito board support - * - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - */ - -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/smsc911x.h> -#include <linux/videodev2.h> -#include <mach/common.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <asm/hardware/cache-l2x0.h> -#include <mach/r8a7740.h> -#include <mach/irqs.h> -#include <video/sh_mobile_lcdc.h> - -/* - * CS Address device note - *---------------------------------------------------------------- - * 0 0x0000_0000 NOR Flash (64MB) SW12 : bit3 = OFF - * 2 0x0800_0000 ExtNOR (64MB) SW12 : bit3 = OFF - * 4 - - * 5A - - * 5B 0x1600_0000 SRAM (8MB) - * 6 0x1800_0000 FPGA (64K) - * 0x1801_0000 Ether (4KB) - * 0x1801_1000 USB (4KB) - */ - -/* - * SW12 - * - * bit1 bit2 bit3 - *---------------------------------------------------------------------------- - * ON NOR WriteProtect NAND WriteProtect CS0 ExtNOR / CS2 NOR - * OFF NOR Not WriteProtect NAND Not WriteProtect CS0 NOR / CS2 ExtNOR - */ - -/* - * SCIFA5 (CN42) - * - * S38.3 = ON - * S39.6 = ON - * S43.1 = ON - */ - -/* - * LCDC0 (CN3/CN4/CN7) - * - * S38.1 = OFF - * S38.2 = OFF - */ - -/* Dummy supplies, where voltage doesn't matter */ -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), -}; - -/* - * FPGA - */ -#define IRQSR0 0x0020 -#define IRQSR1 0x0022 -#define IRQMR0 0x0030 -#define IRQMR1 0x0032 -#define BUSSWMR1 0x0070 -#define BUSSWMR2 0x0072 -#define BUSSWMR3 0x0074 -#define BUSSWMR4 0x0076 - -#define LCDCR 0x10B4 -#define DEVRSTCR1 0x10D0 -#define DEVRSTCR2 0x10D2 -#define A1MDSR 0x10E0 -#define BVERR 0x1100 - -/* FPGA IRQ */ -#define FPGA_IRQ_BASE (512) -#define FPGA_IRQ0 (FPGA_IRQ_BASE) -#define FPGA_IRQ1 (FPGA_IRQ_BASE + 16) -#define FPGA_ETH_IRQ (FPGA_IRQ0 + 15) -static u16 bonito_fpga_read(u32 offset) -{ - return __raw_readw(IOMEM(0xf0003000) + offset); -} - -static void bonito_fpga_write(u32 offset, u16 val) -{ - __raw_writew(val, IOMEM(0xf0003000) + offset); -} - -static void bonito_fpga_irq_disable(struct irq_data *data) -{ - unsigned int irq = data->irq; - u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1; - int shift = irq % 16; - - bonito_fpga_write(addr, bonito_fpga_read(addr) | (1 << shift)); -} - -static void bonito_fpga_irq_enable(struct irq_data *data) -{ - unsigned int irq = data->irq; - u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1; - int shift = irq % 16; - - bonito_fpga_write(addr, bonito_fpga_read(addr) & ~(1 << shift)); -} - -static struct irq_chip bonito_fpga_irq_chip __read_mostly = { - .name = "bonito FPGA", - .irq_mask = bonito_fpga_irq_disable, - .irq_unmask = bonito_fpga_irq_enable, -}; - -static void bonito_fpga_irq_demux(unsigned int irq, struct irq_desc *desc) -{ - u32 val = bonito_fpga_read(IRQSR1) << 16 | - bonito_fpga_read(IRQSR0); - u32 mask = bonito_fpga_read(IRQMR1) << 16 | - bonito_fpga_read(IRQMR0); - - int i; - - val &= ~mask; - - for (i = 0; i < 32; i++) { - if (!(val & (1 << i))) - continue; - - generic_handle_irq(FPGA_IRQ_BASE + i); - } -} - -static void bonito_fpga_init(void) -{ - int i; - - bonito_fpga_write(IRQMR0, 0xffff); /* mask all */ - bonito_fpga_write(IRQMR1, 0xffff); /* mask all */ - - /* Device reset */ - bonito_fpga_write(DEVRSTCR1, - (1 << 2)); /* Eth */ - - /* FPGA irq require special handling */ - for (i = FPGA_IRQ_BASE; i < FPGA_IRQ_BASE + 32; i++) { - irq_set_chip_and_handler_name(i, &bonito_fpga_irq_chip, - handle_level_irq, "level"); - set_irq_flags(i, IRQF_VALID); /* yuck */ - } - - irq_set_chained_handler(evt2irq(0x0340), bonito_fpga_irq_demux); - irq_set_irq_type(evt2irq(0x0340), IRQ_TYPE_LEVEL_LOW); -} - -/* -* PMIC settings -* -* FIXME -* -* bonito board needs some settings by pmic which use i2c access. -* pmic settings use device_initcall() here for use it. -*/ -static __u8 *pmic_settings = NULL; -static __u8 pmic_do_2A[] = { - 0x1C, 0x09, - 0x1A, 0x80, - 0xff, 0xff, -}; - -static int __init pmic_init(void) -{ - struct i2c_adapter *a = i2c_get_adapter(0); - struct i2c_msg msg; - __u8 buf[2]; - int i, ret; - - if (!pmic_settings) - return 0; - if (!a) - return 0; - - msg.addr = 0x46; - msg.buf = buf; - msg.len = 2; - msg.flags = 0; - - for (i = 0; ; i += 2) { - buf[0] = pmic_settings[i + 0]; - buf[1] = pmic_settings[i + 1]; - - if ((0xff == buf[0]) && (0xff == buf[1])) - break; - - ret = i2c_transfer(a, &msg, 1); - if (ret < 0) { - pr_err("i2c transfer fail\n"); - break; - } - } - - return 0; -} -device_initcall(pmic_init); - -/* - * LCDC0 - */ -static const struct fb_videomode lcdc0_mode = { - .name = "WVGA Panel", - .xres = 800, - .yres = 480, - .left_margin = 88, - .right_margin = 40, - .hsync_len = 128, - .upper_margin = 20, - .lower_margin = 5, - .vsync_len = 5, - .sync = 0, -}; - -static struct sh_mobile_lcdc_info lcdc0_info = { - .clock_source = LCDC_CLK_BUS, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .interface_type = RGB24, - .clock_divider = 5, - .flags = 0, - .lcd_modes = &lcdc0_mode, - .num_modes = 1, - .panel_cfg = { - .width = 152, - .height = 91, - }, - }, -}; - -static struct resource lcdc0_resources[] = { - [0] = { - .name = "LCDC0", - .start = 0xfe940000, - .end = 0xfe943fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x0580), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device lcdc0_device = { - .name = "sh_mobile_lcdc_fb", - .id = 0, - .resource = lcdc0_resources, - .num_resources = ARRAY_SIZE(lcdc0_resources), - .dev = { - .platform_data = &lcdc0_info, - .coherent_dma_mask = ~0, - }, -}; - -static const struct pinctrl_map lcdc0_pinctrl_map[] = { - /* LCD0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", - "lcd0_data24_1", "lcd0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", - "lcd0_lclk_1", "lcd0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", - "lcd0_sync", "lcd0"), -}; - -/* - * SMSC 9221 - */ -static struct resource smsc_resources[] = { - [0] = { - .start = 0x18010000, - .end = 0x18011000 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = FPGA_ETH_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct smsc911x_platform_config smsc_platdata = { - .flags = SMSC911X_USE_16BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, -}; - -static struct platform_device smsc_device = { - .name = "smsc911x", - .dev = { - .platform_data = &smsc_platdata, - }, - .resource = smsc_resources, - .num_resources = ARRAY_SIZE(smsc_resources), -}; - -/* - * core board devices - */ -static struct platform_device *bonito_core_devices[] __initdata = { -}; - -/* - * base board devices - */ -static struct platform_device *bonito_base_devices[] __initdata = { - &lcdc0_device, - &smsc_device, -}; - -/* - * map I/O - */ -static struct map_desc bonito_io_desc[] __initdata = { - /* - * for FPGA (0x1800000-0x19ffffff) - * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000 - */ - { - .virtual = 0xf0003000, - .pfn = __phys_to_pfn(0x18000000), - .length = PAGE_SIZE * 2, - .type = MT_DEVICE_NONSHARED - } -}; - -static void __init bonito_map_io(void) -{ - r8a7740_map_io(); - iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc)); -} - -/* - * board init - */ -#define BIT_ON(sw, bit) (sw & (1 << bit)) -#define BIT_OFF(sw, bit) (!(sw & (1 << bit))) - -#define VCCQ1CR IOMEM(0xE6058140) -#define VCCQ1LCDCR IOMEM(0xE6058186) - -static void __init bonito_init(void) -{ - u16 val; - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - - r8a7740_pinmux_init(); - bonito_fpga_init(); - - pmic_settings = pmic_do_2A; - - /* - * core board settings - */ - -#ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); -#endif - - r8a7740_add_standard_devices(); - - platform_add_devices(bonito_core_devices, - ARRAY_SIZE(bonito_core_devices)); - - /* - * base board settings - */ - gpio_request_one(176, GPIOF_IN, NULL); - if (!gpio_get_value(176)) { - u16 bsw2; - u16 bsw3; - u16 bsw4; - - /* - * FPGA - */ - gpio_request(GPIO_FN_CS5B, NULL); - gpio_request(GPIO_FN_CS6A, NULL); - gpio_request(GPIO_FN_CS5A_PORT105, NULL); - gpio_request(GPIO_FN_IRQ10, NULL); - - val = bonito_fpga_read(BVERR); - pr_info("bonito version: cpu %02x, base %02x\n", - ((val >> 8) & 0xFF), - ((val >> 0) & 0xFF)); - - bsw2 = bonito_fpga_read(BUSSWMR2); - bsw3 = bonito_fpga_read(BUSSWMR3); - bsw4 = bonito_fpga_read(BUSSWMR4); - - /* - * SCIFA5 (CN42) - */ - if (BIT_OFF(bsw2, 1) && /* S38.3 = ON */ - BIT_OFF(bsw3, 9) && /* S39.6 = ON */ - BIT_OFF(bsw4, 4)) { /* S43.1 = ON */ - gpio_request(GPIO_FN_SCIFA5_TXD_PORT91, NULL); - gpio_request(GPIO_FN_SCIFA5_RXD_PORT92, NULL); - } - - /* - * LCDC0 (CN3) - */ - if (BIT_ON(bsw2, 3) && /* S38.1 = OFF */ - BIT_ON(bsw2, 2)) { /* S38.2 = OFF */ - pinctrl_register_mappings(lcdc0_pinctrl_map, - ARRAY_SIZE(lcdc0_pinctrl_map)); - gpio_request(GPIO_FN_LCDC0_SELECT, NULL); - - gpio_request_one(61, GPIOF_OUT_INIT_HIGH, - NULL); /* LCDDON */ - - /* backlight on */ - bonito_fpga_write(LCDCR, 1); - - /* drivability Max */ - __raw_writew(0x00FF , VCCQ1LCDCR); - __raw_writew(0xFFFF , VCCQ1CR); - } - - platform_add_devices(bonito_base_devices, - ARRAY_SIZE(bonito_base_devices)); - } -} - -static void __init bonito_earlytimer_init(void) -{ - u16 val; - u8 md_ck = 0; - - /* read MD_CK value */ - val = bonito_fpga_read(A1MDSR); - if (val & (1 << 10)) - md_ck |= MD_CK2; - if (val & (1 << 9)) - md_ck |= MD_CK1; - if (val & (1 << 8)) - md_ck |= MD_CK0; - - r8a7740_clock_init(md_ck); - shmobile_earlytimer_init(); -} - -static void __init bonito_add_early_devices(void) -{ - r8a7740_add_early_devices(); -} - -MACHINE_START(BONITO, "bonito") - .map_io = bonito_map_io, - .init_early = bonito_add_early_devices, - .init_irq = r8a7740_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = bonito_init, - .init_late = shmobile_init_late, - .init_time = bonito_earlytimer_init, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index aefa50d385b..44055fe8a45 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -79,7 +79,6 @@ static void __init kzm_init(void) sh73a0_pinmux_init(); /* enable SD */ - gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index e6b775a10aa..1fdf05cb6da 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -663,13 +663,13 @@ static unsigned long pin_pullup_conf[] = { static const struct pinctrl_map kzm_pinctrl_map[] = { /* FSIA (AK4648) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0", "fsia_mclk_in", "fsia"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0", "fsia_sclk_in", "fsia"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0", "fsia_data_in", "fsia"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0", "fsia_data_out", "fsia"), /* I2C3 */ PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0", @@ -788,9 +788,6 @@ static void __init kzm_init(void) /* Touchscreen */ gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */ - /* enable SD */ - gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); - #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index f587187a860..6114edd0a97 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -21,15 +21,30 @@ #include <linux/interrupt.h> #include <linux/irqchip.h> #include <linux/kernel.h> +#include <linux/pinctrl/machine.h> #include <linux/platform_device.h> #include <mach/common.h> #include <mach/r8a7790.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +static const struct pinctrl_map lager_pinctrl_map[] = { + /* SCIF0 (CN19: DEBUG SERIAL0) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790", + "scif0_data", "scif0"), + /* SCIF1 (CN20: DEBUG SERIAL1) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790", + "scif1_data", "scif1"), +}; + static void __init lager_add_standard_devices(void) { r8a7790_clock_init(); + + pinctrl_register_mappings(lager_pinctrl_map, + ARRAY_SIZE(lager_pinctrl_map)); + r8a7790_pinmux_init(); + r8a7790_add_standard_devices(); } diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index fa3407da682..85f51a849a5 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1309,6 +1309,49 @@ static struct i2c_board_info i2c1_devices[] = { }; static const struct pinctrl_map mackerel_pinctrl_map[] = { + /* ADXL34X */ + PIN_MAP_MUX_GROUP_DEFAULT("1-0053", "pfc-sh7372", + "intc_irq21", "intc"), + /* CEU */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", + "ceu_data_0_7", "ceu"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", + "ceu_clk_0", "ceu"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", + "ceu_sync", "ceu"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", + "ceu_field", "ceu"), + /* FLCTL */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372", + "flctl_data", "flctl"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372", + "flctl_ce0", "flctl"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372", + "flctl_ctrl", "flctl"), + /* FSIA (AK4643) */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_data_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_data_out", "fsia"), + /* FSIB (HDMI) */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372", + "fsib_mclk_in", "fsib"), + /* HDMI */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372", + "hdmi", "hdmi"), + /* LCDC */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372", + "lcd_data24", "lcd"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372", + "lcd_sync", "lcd"), + /* SCIFA0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372", + "scifa0_data", "scifa0"), + /* SCIFA2 (GT-720F GPS module) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh7372", + "scifa2_data", "scifa2"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", "sdhi0_data4", "sdhi0"), @@ -1316,6 +1359,8 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = { "sdhi0_ctrl", "sdhi0"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", "sdhi0_wp", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", + "intc_irq26_1", "intc"), /* SDHI1 */ #if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", @@ -1334,6 +1379,25 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = { "sdhi2_data4", "sdhi2"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372", "sdhi2_ctrl", "sdhi2"), + /* SMSC911X */ + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372", + "bsc_cs5a", "bsc"), + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372", + "intc_irq6_0", "intc"), + /* ST1232 */ + PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-sh7372", + "intc_irq7_0", "intc"), + /* TCA6416 */ + PIN_MAP_MUX_GROUP_DEFAULT("0-0020", "pfc-sh7372", + "intc_irq9_0", "intc"), + /* USBHS0 */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372", + "usb0_vbus", "usb0"), + /* USBHS1 */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372", + "usb1_vbus", "usb1"), + PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372", + "usb1_otg_id_0", "usb1"), }; #define GPIO_PORT9CR IOMEM(0xE6051009) @@ -1377,61 +1441,18 @@ static void __init mackerel_init(void) ARRAY_SIZE(mackerel_pinctrl_map)); sh7372_pinmux_init(); - /* enable SCIFA0 */ - gpio_request(GPIO_FN_SCIFA0_TXD, NULL); - gpio_request(GPIO_FN_SCIFA0_RXD, NULL); - - /* enable SMSC911X */ - gpio_request(GPIO_FN_CS5A, NULL); - gpio_request(GPIO_FN_IRQ6_39, NULL); - - /* LCDC */ - gpio_request(GPIO_FN_LCDD23, NULL); - gpio_request(GPIO_FN_LCDD22, NULL); - gpio_request(GPIO_FN_LCDD21, NULL); - gpio_request(GPIO_FN_LCDD20, NULL); - gpio_request(GPIO_FN_LCDD19, NULL); - gpio_request(GPIO_FN_LCDD18, NULL); - gpio_request(GPIO_FN_LCDD17, NULL); - gpio_request(GPIO_FN_LCDD16, NULL); - gpio_request(GPIO_FN_LCDD15, NULL); - gpio_request(GPIO_FN_LCDD14, NULL); - gpio_request(GPIO_FN_LCDD13, NULL); - gpio_request(GPIO_FN_LCDD12, NULL); - gpio_request(GPIO_FN_LCDD11, NULL); - gpio_request(GPIO_FN_LCDD10, NULL); - gpio_request(GPIO_FN_LCDD9, NULL); - gpio_request(GPIO_FN_LCDD8, NULL); - gpio_request(GPIO_FN_LCDD7, NULL); - gpio_request(GPIO_FN_LCDD6, NULL); - gpio_request(GPIO_FN_LCDD5, NULL); - gpio_request(GPIO_FN_LCDD4, NULL); - gpio_request(GPIO_FN_LCDD3, NULL); - gpio_request(GPIO_FN_LCDD2, NULL); - gpio_request(GPIO_FN_LCDD1, NULL); - gpio_request(GPIO_FN_LCDD0, NULL); - gpio_request(GPIO_FN_LCDDISP, NULL); - gpio_request(GPIO_FN_LCDDCK, NULL); - /* backlight, off by default */ gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL); gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ /* USBHS0 */ - gpio_request(GPIO_FN_VBUS0_0, NULL); gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */ /* USBHS1 */ - gpio_request(GPIO_FN_VBUS0_1, NULL); gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */ - gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* enable FSI2 port A (ak4643) */ - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAISLD, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); + /* FSI2 port A (ak4643) */ gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ gpio_request(9, NULL); @@ -1441,8 +1462,7 @@ static void __init mackerel_init(void) intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */ - /* setup FSI2 port B (HDMI) */ - gpio_request(GPIO_FN_FSIBCK, NULL); + /* FSI2 port B (HDMI) */ __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ /* set SPU2 clock to 119.6 MHz */ @@ -1452,68 +1472,15 @@ static void __init mackerel_init(void) clk_put(clk); } - /* enable Keypad */ - gpio_request(GPIO_FN_IRQ9_42, NULL); + /* Keypad */ irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH); - /* enable Touchscreen */ - gpio_request(GPIO_FN_IRQ7_40, NULL); + /* Touchscreen */ irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); - /* enable Accelerometer */ - gpio_request(GPIO_FN_IRQ21, NULL); + /* Accelerometer */ irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH); - /* SDHI0 PORT172 card-detect IRQ26 */ - gpio_request(GPIO_FN_IRQ26_172, NULL); - - /* FLCTL */ - gpio_request(GPIO_FN_D0_NAF0, NULL); - gpio_request(GPIO_FN_D1_NAF1, NULL); - gpio_request(GPIO_FN_D2_NAF2, NULL); - gpio_request(GPIO_FN_D3_NAF3, NULL); - gpio_request(GPIO_FN_D4_NAF4, NULL); - gpio_request(GPIO_FN_D5_NAF5, NULL); - gpio_request(GPIO_FN_D6_NAF6, NULL); - gpio_request(GPIO_FN_D7_NAF7, NULL); - gpio_request(GPIO_FN_D8_NAF8, NULL); - gpio_request(GPIO_FN_D9_NAF9, NULL); - gpio_request(GPIO_FN_D10_NAF10, NULL); - gpio_request(GPIO_FN_D11_NAF11, NULL); - gpio_request(GPIO_FN_D12_NAF12, NULL); - gpio_request(GPIO_FN_D13_NAF13, NULL); - gpio_request(GPIO_FN_D14_NAF14, NULL); - gpio_request(GPIO_FN_D15_NAF15, NULL); - gpio_request(GPIO_FN_FCE0, NULL); - gpio_request(GPIO_FN_WE0_FWE, NULL); - gpio_request(GPIO_FN_FRB, NULL); - gpio_request(GPIO_FN_A4_FOE, NULL); - gpio_request(GPIO_FN_A5_FCDE, NULL); - gpio_request(GPIO_FN_RD_FSC, NULL); - - /* enable GPS module (GT-720F) */ - gpio_request(GPIO_FN_SCIFA2_TXD1, NULL); - gpio_request(GPIO_FN_SCIFA2_RXD1, NULL); - - /* CEU */ - gpio_request(GPIO_FN_VIO_CLK, NULL); - gpio_request(GPIO_FN_VIO_VD, NULL); - gpio_request(GPIO_FN_VIO_HD, NULL); - gpio_request(GPIO_FN_VIO_FIELD, NULL); - gpio_request(GPIO_FN_VIO_CKO, NULL); - gpio_request(GPIO_FN_VIO_D7, NULL); - gpio_request(GPIO_FN_VIO_D6, NULL); - gpio_request(GPIO_FN_VIO_D5, NULL); - gpio_request(GPIO_FN_VIO_D4, NULL); - gpio_request(GPIO_FN_VIO_D3, NULL); - gpio_request(GPIO_FN_VIO_D2, NULL); - gpio_request(GPIO_FN_VIO_D1, NULL); - gpio_request(GPIO_FN_VIO_D0, NULL); - - /* HDMI */ - gpio_request(GPIO_FN_HDMI_HPD, NULL); - gpio_request(GPIO_FN_HDMI_CEC, NULL); - /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ srcr4 = __raw_readl(SRCR4); __raw_writel(srcr4 | (1 << 13), SRCR4); diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index b9594e911ce..b1b41b199f9 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -28,6 +28,7 @@ #include <linux/leds.h> #include <linux/dma-mapping.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/gpio-rcar.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/smsc911x.h> @@ -36,10 +37,6 @@ #include <linux/mmc/host.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> -#include <linux/usb/otg.h> -#include <linux/usb/ehci_pdriver.h> -#include <linux/usb/ohci_pdriver.h> -#include <linux/pm_runtime.h> #include <mach/hardware.h> #include <mach/r8a7779.h> #include <mach/common.h> @@ -60,6 +57,8 @@ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vdd33a", "smsc911x"), }; +static struct rcar_phy_platform_data usb_phy_platform_data __initdata; + /* SMSC LAN89218 */ static struct resource smsc911x_resources[] = { [0] = { @@ -149,39 +148,19 @@ static struct platform_device hspi_device = { .num_resources = ARRAY_SIZE(hspi_resources), }; -/* USB PHY */ -static struct resource usb_phy_resources[] = { - [0] = { - .start = 0xffe70000, - .end = 0xffe70900 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xfff70000, - .end = 0xfff70900 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device usb_phy_device = { - .name = "rcar_usb_phy", - .resource = usb_phy_resources, - .num_resources = ARRAY_SIZE(usb_phy_resources), -}; - /* LEDS */ static struct gpio_led marzen_leds[] = { { .name = "led2", - .gpio = 157, + .gpio = RCAR_GP_PIN(4, 29), .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "led3", - .gpio = 158, + .gpio = RCAR_GP_PIN(4, 30), .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "led4", - .gpio = 159, + .gpio = RCAR_GP_PIN(4, 31), .default_state = LEDS_GPIO_DEFSTATE_ON, }, }; @@ -204,161 +183,9 @@ static struct platform_device *marzen_devices[] __initdata = { &sdhi0_device, &thermal_device, &hspi_device, - &usb_phy_device, &leds_device, }; -/* USB */ -static struct usb_phy *phy; -static int usb_power_on(struct platform_device *pdev) -{ - if (IS_ERR(phy)) - return PTR_ERR(phy); - - pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); - - usb_phy_init(phy); - - return 0; -} - -static void usb_power_off(struct platform_device *pdev) -{ - if (IS_ERR(phy)) - return; - - usb_phy_shutdown(phy); - - pm_runtime_put_sync(&pdev->dev); - pm_runtime_disable(&pdev->dev); -} - -static struct usb_ehci_pdata ehcix_pdata = { - .power_on = usb_power_on, - .power_off = usb_power_off, - .power_suspend = usb_power_off, -}; - -static struct resource ehci0_resources[] = { - [0] = { - .start = 0xffe70000, - .end = 0xffe70400 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_iid(0x4c), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ehci0_device = { - .name = "ehci-platform", - .id = 0, - .dev = { - .dma_mask = &ehci0_device.dev.coherent_dma_mask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &ehcix_pdata, - }, - .num_resources = ARRAY_SIZE(ehci0_resources), - .resource = ehci0_resources, -}; - -static struct resource ehci1_resources[] = { - [0] = { - .start = 0xfff70000, - .end = 0xfff70400 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_iid(0x4d), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ehci1_device = { - .name = "ehci-platform", - .id = 1, - .dev = { - .dma_mask = &ehci1_device.dev.coherent_dma_mask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &ehcix_pdata, - }, - .num_resources = ARRAY_SIZE(ehci1_resources), - .resource = ehci1_resources, -}; - -static struct usb_ohci_pdata ohcix_pdata = { - .power_on = usb_power_on, - .power_off = usb_power_off, - .power_suspend = usb_power_off, -}; - -static struct resource ohci0_resources[] = { - [0] = { - .start = 0xffe70400, - .end = 0xffe70800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_iid(0x4c), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci0_device = { - .name = "ohci-platform", - .id = 0, - .dev = { - .dma_mask = &ohci0_device.dev.coherent_dma_mask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &ohcix_pdata, - }, - .num_resources = ARRAY_SIZE(ohci0_resources), - .resource = ohci0_resources, -}; - -static struct resource ohci1_resources[] = { - [0] = { - .start = 0xfff70400, - .end = 0xfff70800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_iid(0x4d), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci1_device = { - .name = "ohci-platform", - .id = 1, - .dev = { - .dma_mask = &ohci1_device.dev.coherent_dma_mask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &ohcix_pdata, - }, - .num_resources = ARRAY_SIZE(ohci1_resources), - .resource = ohci1_resources, -}; - -static struct platform_device *marzen_late_devices[] __initdata = { - &ehci0_device, - &ehci1_device, - &ohci0_device, - &ohci1_device, -}; - -void __init marzen_init_late(void) -{ - /* get usb phy */ - phy = usb_get_phy(USB_PHY_TYPE_USB2); - - shmobile_init_late(); - platform_add_devices(marzen_late_devices, - ARRAY_SIZE(marzen_late_devices)); -} - static const struct pinctrl_map marzen_pinctrl_map[] = { /* HSPI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779", @@ -406,6 +233,7 @@ static void __init marzen_init(void) r8a7779_pinmux_init(); r8a7779_add_standard_devices(); + r8a7779_add_usb_phy_device(&usb_phy_platform_data); platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); } @@ -416,6 +244,6 @@ MACHINE_START(MARZEN, "marzen") .nr_irqs = NR_IRQS_LEGACY, .init_irq = r8a7779_init_irq, .init_machine = marzen_init, - .init_late = marzen_init_late, + .init_late = r8a7779_init_late, .init_time = r8a7779_earlytimer_init, MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index e710c00c382..5f7fe628b8a 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -22,15 +22,44 @@ #include <linux/kernel.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <mach/clock.h> #include <mach/common.h> #define CPG_BASE 0xe6150000 #define CPG_LEN 0x270 -#define MPCKCR 0xe6150080 #define SMSTPCR2 0xe6150138 +#define SMSTPCR3 0xe615013c #define SMSTPCR5 0xe6150144 +#define FRQCRA 0xE6150000 +#define FRQCRB 0xE6150004 +#define VCLKCR1 0xE6150008 +#define VCLKCR2 0xE615000C +#define VCLKCR3 0xE615001C +#define VCLKCR4 0xE6150014 +#define VCLKCR5 0xE6150034 +#define ZBCKCR 0xE6150010 +#define SD0CKCR 0xE6150074 +#define SD1CKCR 0xE6150078 +#define SD2CKCR 0xE615007C +#define MMC0CKCR 0xE6150240 +#define MMC1CKCR 0xE6150244 +#define FSIACKCR 0xE6150018 +#define FSIBCKCR 0xE6150090 +#define MPCKCR 0xe6150080 +#define SPUVCKCR 0xE6150094 +#define HSICKCR 0xE615026C +#define M4CKCR 0xE6150098 +#define PLLECR 0xE61500D0 +#define PLL1CR 0xE6150028 +#define PLL2CR 0xE615002C +#define PLL2SCR 0xE61501F4 +#define PLL2HCR 0xE61501E4 +#define CKSCR 0xE61500C0 + +#define CPG_MAP(o) ((o - CPG_BASE) + cpg_mapping.base) + static struct clk_mapping cpg_mapping = { .phys = CPG_BASE, .len = CPG_LEN, @@ -51,29 +80,327 @@ static struct clk extal2_clk = { .mapping = &cpg_mapping, }; +static struct sh_clk_ops followparent_clk_ops = { + .recalc = followparent_recalc, +}; + +static struct clk main_clk = { + /* .parent will be set r8a73a4_clock_init */ + .ops = &followparent_clk_ops, +}; + +SH_CLK_RATIO(div2, 1, 2); +SH_CLK_RATIO(div4, 1, 4); + +SH_FIXED_RATIO_CLK(main_div2_clk, main_clk, div2); +SH_FIXED_RATIO_CLK(extal1_div2_clk, extal1_clk, div2); +SH_FIXED_RATIO_CLK(extal2_div2_clk, extal2_clk, div2); +SH_FIXED_RATIO_CLK(extal2_div4_clk, extal2_clk, div4); + +/* External FSIACK/FSIBCK clock */ +static struct clk fsiack_clk = { +}; + +static struct clk fsibck_clk = { +}; + +/* + * PLL clocks + */ +static struct clk *pll_parent_main[] = { + [0] = &main_clk, + [1] = &main_div2_clk +}; + +static struct clk *pll_parent_main_extal[8] = { + [0] = &main_div2_clk, + [1] = &extal2_div2_clk, + [3] = &extal2_div4_clk, + [4] = &main_clk, + [5] = &extal2_clk, +}; + +static unsigned long pll_recalc(struct clk *clk) +{ + unsigned long mult = 1; + + if (ioread32(CPG_MAP(PLLECR)) & (1 << clk->enable_bit)) + mult = (((ioread32(clk->mapped_reg) >> 24) & 0x7f) + 1); + + return clk->parent->rate * mult; +} + +static int pll_set_parent(struct clk *clk, struct clk *parent) +{ + u32 val; + int i, ret; + + if (!clk->parent_table || !clk->parent_num) + return -EINVAL; + + /* Search the parent */ + for (i = 0; i < clk->parent_num; i++) + if (clk->parent_table[i] == parent) + break; + + if (i == clk->parent_num) + return -ENODEV; + + ret = clk_reparent(clk, parent); + if (ret < 0) + return ret; + + val = ioread32(clk->mapped_reg) & + ~(((1 << clk->src_width) - 1) << clk->src_shift); + + iowrite32(val | i << clk->src_shift, clk->mapped_reg); + + return 0; +} + +static struct sh_clk_ops pll_clk_ops = { + .recalc = pll_recalc, + .set_parent = pll_set_parent, +}; + +#define PLL_CLOCK(name, p, pt, w, s, reg, e) \ + static struct clk name = { \ + .ops = &pll_clk_ops, \ + .flags = CLK_ENABLE_ON_INIT, \ + .parent = p, \ + .parent_table = pt, \ + .parent_num = ARRAY_SIZE(pt), \ + .src_width = w, \ + .src_shift = s, \ + .enable_reg = (void __iomem *)reg, \ + .enable_bit = e, \ + .mapping = &cpg_mapping, \ + } + +PLL_CLOCK(pll1_clk, &main_clk, pll_parent_main, 1, 7, PLL1CR, 1); +PLL_CLOCK(pll2_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR, 2); +PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4); +PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5); + +SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2); + static struct clk *main_clks[] = { &extalr_clk, &extal1_clk, + &extal1_div2_clk, &extal2_clk, + &extal2_div2_clk, + &extal2_div4_clk, + &main_clk, + &main_div2_clk, + &fsiack_clk, + &fsibck_clk, + &pll1_clk, + &pll1_div2_clk, + &pll2_clk, + &pll2s_clk, + &pll2h_clk, +}; + +/* DIV4 */ +static void div4_kick(struct clk *clk) +{ + unsigned long value; + + /* set KICK bit in FRQCRB to update hardware setting */ + value = ioread32(CPG_MAP(FRQCRB)); + value |= (1 << 31); + iowrite32(value, CPG_MAP(FRQCRB)); +} + +static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10}; + +static struct clk_div_mult_table div4_div_mult_table = { + .divisors = divisors, + .nr_divisors = ARRAY_SIZE(divisors), +}; + +static struct clk_div4_table div4_table = { + .div_mult_table = &div4_div_mult_table, + .kick = div4_kick, +}; + +enum { + DIV4_I, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2, + DIV4_ZX, DIV4_ZS, DIV4_HP, + DIV4_NR }; + +static struct clk div4_clks[DIV4_NR] = { + [DIV4_I] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 20, 0x0dff, CLK_ENABLE_ON_INIT), + [DIV4_M3] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT), + [DIV4_B] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 8, 0x0dff, CLK_ENABLE_ON_INIT), + [DIV4_M1] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 4, 0x1dff, 0), + [DIV4_M2] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 0, 0x1dff, 0), + [DIV4_ZX] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 12, 0x0dff, 0), + [DIV4_ZS] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 8, 0x0dff, 0), + [DIV4_HP] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 4, 0x0dff, 0), }; enum { + DIV6_ZB, + DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2, + DIV6_MMC0, DIV6_MMC1, + DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VCK4, DIV6_VCK5, + DIV6_FSIA, DIV6_FSIB, + DIV6_MP, DIV6_M4, DIV6_HSI, DIV6_SPUV, + DIV6_NR }; + +static struct clk *div6_parents[8] = { + [0] = &pll1_div2_clk, + [1] = &pll2s_clk, + [3] = &extal2_clk, + [4] = &main_div2_clk, + [6] = &extalr_clk, +}; + +static struct clk *fsia_parents[4] = { + [0] = &pll1_div2_clk, + [1] = &pll2s_clk, + [2] = &fsiack_clk, +}; + +static struct clk *fsib_parents[4] = { + [0] = &pll1_div2_clk, + [1] = &pll2s_clk, + [2] = &fsibck_clk, +}; + +static struct clk *mp_parents[4] = { + [0] = &pll1_div2_clk, + [1] = &pll2s_clk, + [2] = &extal2_clk, + [3] = &extal2_clk, +}; + +static struct clk *m4_parents[2] = { + [0] = &pll2s_clk, +}; + +static struct clk *hsi_parents[4] = { + [0] = &pll2h_clk, + [1] = &pll1_div2_clk, + [3] = &pll2s_clk, +}; + +/*** FIXME *** + * SH_CLK_DIV6_EXT() macro doesn't care .mapping + * but, it is necessary on R-Car (= ioremap() base CPG) + * The difference between + * SH_CLK_DIV6_EXT() <--> SH_CLK_MAP_DIV6_EXT() + * is only .mapping + */ +#define SH_CLK_MAP_DIV6_EXT(_reg, _flags, _parents, \ + _num_parents, _src_shift, _src_width) \ +{ \ + .enable_reg = (void __iomem *)_reg, \ + .enable_bit = 0, /* unused */ \ + .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \ + .div_mask = SH_CLK_DIV6_MSK, \ + .parent_table = _parents, \ + .parent_num = _num_parents, \ + .src_shift = _src_shift, \ + .src_width = _src_width, \ + .mapping = &cpg_mapping, \ +} + +static struct clk div6_clks[DIV6_NR] = { + [DIV6_ZB] = SH_CLK_MAP_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT, + div6_parents, 2, 7, 1), + [DIV6_SDHI0] = SH_CLK_MAP_DIV6_EXT(SD0CKCR, 0, + div6_parents, 2, 6, 2), + [DIV6_SDHI1] = SH_CLK_MAP_DIV6_EXT(SD1CKCR, 0, + div6_parents, 2, 6, 2), + [DIV6_SDHI2] = SH_CLK_MAP_DIV6_EXT(SD2CKCR, 0, + div6_parents, 2, 6, 2), + [DIV6_MMC0] = SH_CLK_MAP_DIV6_EXT(MMC0CKCR, 0, + div6_parents, 2, 6, 2), + [DIV6_MMC1] = SH_CLK_MAP_DIV6_EXT(MMC1CKCR, 0, + div6_parents, 2, 6, 2), + [DIV6_VCK1] = SH_CLK_MAP_DIV6_EXT(VCLKCR1, 0, /* didn't care bit[6-7] */ + div6_parents, ARRAY_SIZE(div6_parents), 12, 3), + [DIV6_VCK2] = SH_CLK_MAP_DIV6_EXT(VCLKCR2, 0, /* didn't care bit[6-7] */ + div6_parents, ARRAY_SIZE(div6_parents), 12, 3), + [DIV6_VCK3] = SH_CLK_MAP_DIV6_EXT(VCLKCR3, 0, /* didn't care bit[6-7] */ + div6_parents, ARRAY_SIZE(div6_parents), 12, 3), + [DIV6_VCK4] = SH_CLK_MAP_DIV6_EXT(VCLKCR4, 0, /* didn't care bit[6-7] */ + div6_parents, ARRAY_SIZE(div6_parents), 12, 3), + [DIV6_VCK5] = SH_CLK_MAP_DIV6_EXT(VCLKCR5, 0, /* didn't care bit[6-7] */ + div6_parents, ARRAY_SIZE(div6_parents), 12, 3), + [DIV6_FSIA] = SH_CLK_MAP_DIV6_EXT(FSIACKCR, 0, + fsia_parents, ARRAY_SIZE(fsia_parents), 6, 2), + [DIV6_FSIB] = SH_CLK_MAP_DIV6_EXT(FSIBCKCR, 0, + fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2), + [DIV6_MP] = SH_CLK_MAP_DIV6_EXT(MPCKCR, 0, /* it needs bit[9-11] control */ + mp_parents, ARRAY_SIZE(mp_parents), 6, 2), + /* pll2s will be selected always for M4 */ + [DIV6_M4] = SH_CLK_MAP_DIV6_EXT(M4CKCR, 0, /* it needs bit[9] control */ + m4_parents, ARRAY_SIZE(m4_parents), 6, 1), + [DIV6_HSI] = SH_CLK_MAP_DIV6_EXT(HSICKCR, 0, /* it needs bit[9] control */ + hsi_parents, ARRAY_SIZE(hsi_parents), 6, 2), + [DIV6_SPUV] = SH_CLK_MAP_DIV6_EXT(SPUVCKCR, 0, + mp_parents, ARRAY_SIZE(mp_parents), 6, 2), +}; + +/* MSTP */ +enum { MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, + MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP522, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { - [MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */ - [MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */ - [MSTP206] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 6, 0), /* SCIFB0 */ - [MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */ - [MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */ - [MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */ + [MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 4, 0), /* SCIFA0 */ + [MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 3, 0), /* SCIFA1 */ + [MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 6, 0), /* SCIFB0 */ + [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */ + [MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */ + [MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */ + [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */ + [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */ + [MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */ + [MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */ + [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */ [MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */ }; static struct clk_lookup lookups[] = { + /* main clock */ + CLKDEV_CON_ID("extal1", &extal1_clk), + CLKDEV_CON_ID("extal1_div2", &extal1_div2_clk), + CLKDEV_CON_ID("extal2", &extal2_clk), + CLKDEV_CON_ID("extal2_div2", &extal2_div2_clk), + CLKDEV_CON_ID("extal2_div4", &extal2_div4_clk), + CLKDEV_CON_ID("fsiack", &fsiack_clk), + CLKDEV_CON_ID("fsibck", &fsibck_clk), + + /* pll clock */ + CLKDEV_CON_ID("pll1", &pll1_clk), + CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk), + CLKDEV_CON_ID("pll2", &pll2_clk), + CLKDEV_CON_ID("pll2s", &pll2s_clk), + CLKDEV_CON_ID("pll2h", &pll2h_clk), + + /* DIV6 */ + CLKDEV_CON_ID("zb", &div6_clks[DIV6_ZB]), + CLKDEV_CON_ID("vck1", &div6_clks[DIV6_VCK1]), + CLKDEV_CON_ID("vck2", &div6_clks[DIV6_VCK2]), + CLKDEV_CON_ID("vck3", &div6_clks[DIV6_VCK3]), + CLKDEV_CON_ID("vck4", &div6_clks[DIV6_VCK4]), + CLKDEV_CON_ID("vck5", &div6_clks[DIV6_VCK5]), + CLKDEV_CON_ID("fsia", &div6_clks[DIV6_FSIA]), + CLKDEV_CON_ID("fsib", &div6_clks[DIV6_FSIB]), + CLKDEV_CON_ID("mp", &div6_clks[DIV6_MP]), + CLKDEV_CON_ID("m4", &div6_clks[DIV6_M4]), + CLKDEV_CON_ID("hsi", &div6_clks[DIV6_HSI]), + CLKDEV_CON_ID("spuv", &div6_clks[DIV6_SPUV]), + + /* MSTP */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), @@ -81,6 +408,16 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), + CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), + CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]), + CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), + CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), /* for DT */ CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]), @@ -88,22 +425,40 @@ static struct clk_lookup lookups[] = { void __init r8a73a4_clock_init(void) { - void __iomem *cpg_base, *reg; + void __iomem *reg; int k, ret = 0; + u32 ckscr; + + reg = ioremap_nocache(CKSCR, PAGE_SIZE); + BUG_ON(!reg); + ckscr = ioread32(reg); + iounmap(reg); - /* fix MPCLK to EXTAL2 for now. - * this is needed until more detailed clock topology is supported - */ - cpg_base = ioremap_nocache(CPG_BASE, CPG_LEN); - BUG_ON(!cpg_base); - reg = cpg_base + (MPCKCR - CPG_BASE); - iowrite32(ioread32(reg) | 1 << 7 | 0x0c, reg); /* set CKSEL */ - iounmap(cpg_base); + switch ((ckscr >> 28) & 0x3) { + case 0: + main_clk.parent = &extal1_clk; + break; + case 1: + main_clk.parent = &extal1_div2_clk; + break; + case 2: + main_clk.parent = &extal2_clk; + break; + case 3: + main_clk.parent = &extal2_div2_clk; + break; + } for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) ret = clk_register(main_clks[k]); if (!ret) + ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); + + if (!ret) + ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR); + + if (!ret) ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index c0d39aa6de5..7fd32d604e3 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -266,7 +266,7 @@ static struct clk fsiack_clk = { static struct clk fsibck_clk = { }; -struct clk *main_clks[] = { +static struct clk *main_clks[] = { &extalr_clk, &extal1_clk, &extal2_clk, @@ -317,7 +317,7 @@ enum { DIV4_NR }; -struct clk div4_clks[DIV4_NR] = { +static struct clk div4_clks[DIV4_NR] = { [DIV4_I] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT), [DIV4_ZG] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT), [DIV4_B] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT), @@ -461,7 +461,7 @@ enum { MSTP329, MSTP328, MSTP323, MSTP320, MSTP314, MSTP313, MSTP312, - MSTP309, + MSTP309, MSTP304, MSTP416, MSTP415, MSTP407, MSTP406, @@ -499,6 +499,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */ [MSTP309] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 9, 0), /* GEther */ + [MSTP304] = SH_CLK_MSTP32(&div4_clks[DIV4_CP], SMSTPCR3, 4, 0), /* TPU0 */ [MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 16, 0), /* USBHOST */ [MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */ @@ -551,6 +552,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_tmu.4", &mstp_clks[MSTP111]), CLKDEV_DEV_ID("sh_tmu.5", &mstp_clks[MSTP111]), CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), + CLKDEV_DEV_ID("fff20000.i2c", &mstp_clks[MSTP116]), CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), @@ -584,6 +586,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), + CLKDEV_DEV_ID("e6c20000.i2c", &mstp_clks[MSTP323]), CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]), @@ -592,6 +595,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP309]), + CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]), + CLKDEV_DEV_ID("renesas_tpu_pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index cd6855290b1..53798e5037d 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -23,9 +23,23 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* + * MD MD MD MD PLLA PLLB EXTAL clki clkz + * 19 18 12 11 (HMz) (MHz) (MHz) + *---------------------------------------------------------------------------- + * 1 0 0 0 x21 x21 38.00 800 800 + * 1 0 0 1 x24 x24 33.33 800 800 + * 1 0 1 0 x28 x28 28.50 800 800 + * 1 0 1 1 x32 x32 25.00 800 800 + * 1 1 0 1 x24 x21 33.33 800 700 + * 1 1 1 0 x28 x21 28.50 800 600 + * 1 1 1 1 x32 x24 25.00 800 600 + */ + #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <mach/clock.h> #include <mach/common.h> #define MSTPCR0 IOMEM(0xffc80030) @@ -37,6 +51,9 @@ #define MSTPCR4 IOMEM(0xffc80050) #define MSTPCR5 IOMEM(0xffc80054) #define MSTPCR6 IOMEM(0xffc80058) +#define MODEMR 0xFFCC0020 + +#define MD(nr) BIT(nr) /* ioremap() through clock mapping mandatory to avoid * collision with ARM coherent DMA virtual memory range. @@ -47,37 +64,94 @@ static struct clk_mapping cpg_mapping = { .len = 0x80, }; -static struct clk clkp = { - .rate = 62500000, /* FIXME: shortcut */ - .flags = CLK_ENABLE_ON_INIT, +static struct clk extal_clk = { + /* .rate will be updated on r8a7778_clock_init() */ .mapping = &cpg_mapping, }; +/* + * clock ratio of these clock will be updated + * on r8a7778_clock_init() + */ +SH_FIXED_RATIO_CLK_SET(plla_clk, extal_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(pllb_clk, extal_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(i_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(s_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(s1_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(s3_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(s4_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(b_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(out_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(p_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(g_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(z_clk, pllb_clk, 1, 1); + static struct clk *main_clks[] = { - &clkp, + &extal_clk, + &plla_clk, + &pllb_clk, + &i_clk, + &s_clk, + &s1_clk, + &s3_clk, + &s4_clk, + &b_clk, + &out_clk, + &p_clk, + &g_clk, + &z_clk, }; enum { + MSTP331, + MSTP323, MSTP322, MSTP321, MSTP114, - MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, + MSTP100, + MSTP030, + MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, + MSTP007, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { - [MSTP114] = SH_CLK_MSTP32(&clkp, MSTPCR1, 14, 0), /* Ether */ - [MSTP026] = SH_CLK_MSTP32(&clkp, MSTPCR0, 26, 0), /* SCIF0 */ - [MSTP025] = SH_CLK_MSTP32(&clkp, MSTPCR0, 25, 0), /* SCIF1 */ - [MSTP024] = SH_CLK_MSTP32(&clkp, MSTPCR0, 24, 0), /* SCIF2 */ - [MSTP023] = SH_CLK_MSTP32(&clkp, MSTPCR0, 23, 0), /* SCIF3 */ - [MSTP022] = SH_CLK_MSTP32(&clkp, MSTPCR0, 22, 0), /* SCIF4 */ - [MSTP021] = SH_CLK_MSTP32(&clkp, MSTPCR0, 21, 0), /* SCIF5 */ - [MSTP016] = SH_CLK_MSTP32(&clkp, MSTPCR0, 16, 0), /* TMU0 */ - [MSTP015] = SH_CLK_MSTP32(&clkp, MSTPCR0, 15, 0), /* TMU1 */ + [MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */ + [MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */ + [MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */ + [MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */ + [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */ + [MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 0, 0), /* USB0/1 */ + [MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */ + [MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */ + [MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */ + [MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */ + [MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */ + [MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */ + [MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */ + [MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */ + [MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */ + [MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */ + [MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */ + [MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */ + [MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 7, 0), /* HSPI */ }; static struct clk_lookup lookups[] = { + /* main */ + CLKDEV_CON_ID("shyway_clk", &s_clk), + CLKDEV_CON_ID("peripheral_clk", &p_clk), + /* MSTP32 clocks */ + CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */ + CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ + CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ + CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */ + CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ + CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ + CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ + CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ + CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */ + CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ @@ -86,12 +160,93 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */ + CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ + CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ + CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ }; void __init r8a7778_clock_init(void) { + void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); + u32 mode; int k, ret = 0; + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) { + case MD(19): + extal_clk.rate = 38000000; + SH_CLK_SET_RATIO(&plla_clk_ratio, 21, 1); + SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); + break; + case MD(19) | MD(11): + extal_clk.rate = 33333333; + SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1); + SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1); + break; + case MD(19) | MD(12): + extal_clk.rate = 28500000; + SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1); + SH_CLK_SET_RATIO(&pllb_clk_ratio, 28, 1); + break; + case MD(19) | MD(12) | MD(11): + extal_clk.rate = 25000000; + SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1); + SH_CLK_SET_RATIO(&pllb_clk_ratio, 32, 1); + break; + case MD(19) | MD(18) | MD(11): + extal_clk.rate = 33333333; + SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1); + SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); + break; + case MD(19) | MD(18) | MD(12): + extal_clk.rate = 28500000; + SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1); + SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); + break; + case MD(19) | MD(18) | MD(12) | MD(11): + extal_clk.rate = 25000000; + SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1); + SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1); + break; + default: + BUG(); + } + + if (mode & MD(1)) { + SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1); + SH_CLK_SET_RATIO(&s_clk_ratio, 1, 3); + SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 6); + SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4); + SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8); + SH_CLK_SET_RATIO(&p_clk_ratio, 1, 12); + SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12); + if (mode & MD(2)) { + SH_CLK_SET_RATIO(&b_clk_ratio, 1, 18); + SH_CLK_SET_RATIO(&out_clk_ratio, 1, 18); + } else { + SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12); + SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12); + } + } else { + SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1); + SH_CLK_SET_RATIO(&s_clk_ratio, 1, 4); + SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 8); + SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4); + SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8); + SH_CLK_SET_RATIO(&p_clk_ratio, 1, 16); + SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12); + if (mode & MD(2)) { + SH_CLK_SET_RATIO(&b_clk_ratio, 1, 16); + SH_CLK_SET_RATIO(&out_clk_ratio, 1, 16); + } else { + SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12); + SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12); + } + } + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) ret = clk_register(main_clks[k]); diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 31d5cd4d978..9daeb8c3748 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -112,7 +112,7 @@ static struct clk *main_clks[] = { }; enum { MSTP323, MSTP322, MSTP321, MSTP320, - MSTP115, MSTP114, + MSTP116, MSTP115, MSTP114, MSTP103, MSTP101, MSTP100, MSTP030, MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, @@ -125,6 +125,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */ [MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */ [MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */ + [MSTP116] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 16, 0), /* PCIe */ [MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */ [MSTP114] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 14, 0), /* Ether */ [MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 3, 0), /* DU */ @@ -161,6 +162,7 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("peripheral_clk", &clkp_clk), /* MSTP32 clocks */ + CLKDEV_DEV_ID("rcar-pcie", &mstp_clks[MSTP116]), /* PCIe */ CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */ CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */ CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */ diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index bad9bf2e34d..5d71313df52 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -22,48 +22,228 @@ #include <linux/kernel.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <mach/clock.h> #include <mach/common.h> +/* + * MD EXTAL PLL0 PLL1 PLL3 + * 14 13 19 (MHz) *1 *1 + *--------------------------------------------------- + * 0 0 0 15 x 1 x172/2 x208/2 x106 + * 0 0 1 15 x 1 x172/2 x208/2 x88 + * 0 1 0 20 x 1 x130/2 x156/2 x80 + * 0 1 1 20 x 1 x130/2 x156/2 x66 + * 1 0 0 26 / 2 x200/2 x240/2 x122 + * 1 0 1 26 / 2 x200/2 x240/2 x102 + * 1 1 0 30 / 2 x172/2 x208/2 x106 + * 1 1 1 30 / 2 x172/2 x208/2 x88 + * + * *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2) + * see "p1 / 2" on R8A7790_CLOCK_ROOT() below + */ + +#define MD(nr) (1 << nr) + #define CPG_BASE 0xe6150000 #define CPG_LEN 0x1000 #define SMSTPCR2 0xe6150138 +#define SMSTPCR3 0xe615013c #define SMSTPCR7 0xe615014c +#define MODEMR 0xE6160060 +#define SDCKCR 0xE6150074 +#define SD2CKCR 0xE6150078 +#define SD3CKCR 0xE615007C +#define MMC0CKCR 0xE6150240 +#define MMC1CKCR 0xE6150244 +#define SSPCKCR 0xE6150248 +#define SSPRSCKCR 0xE615024C + static struct clk_mapping cpg_mapping = { .phys = CPG_BASE, .len = CPG_LEN, }; -static struct clk p_clk = { - .rate = 65000000, /* shortcut for now */ +static struct clk extal_clk = { + /* .rate will be updated on r8a7790_clock_init() */ .mapping = &cpg_mapping, }; -static struct clk mp_clk = { - .rate = 52000000, /* shortcut for now */ - .mapping = &cpg_mapping, +static struct sh_clk_ops followparent_clk_ops = { + .recalc = followparent_recalc, +}; + +static struct clk main_clk = { + /* .parent will be set r8a73a4_clock_init */ + .ops = &followparent_clk_ops, }; +/* + * clock ratio of these clock will be updated + * on r8a7790_clock_init() + */ +SH_FIXED_RATIO_CLK_SET(pll1_clk, main_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(pll3_clk, main_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(lb_clk, pll1_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(qspi_clk, pll1_clk, 1, 1); + +/* fixed ratio clock */ +SH_FIXED_RATIO_CLK_SET(extal_div2_clk, extal_clk, 1, 2); +SH_FIXED_RATIO_CLK_SET(cp_clk, extal_clk, 1, 2); + +SH_FIXED_RATIO_CLK_SET(pll1_div2_clk, pll1_clk, 1, 2); +SH_FIXED_RATIO_CLK_SET(zg_clk, pll1_clk, 1, 3); +SH_FIXED_RATIO_CLK_SET(zx_clk, pll1_clk, 1, 3); +SH_FIXED_RATIO_CLK_SET(zs_clk, pll1_clk, 1, 6); +SH_FIXED_RATIO_CLK_SET(hp_clk, pll1_clk, 1, 12); +SH_FIXED_RATIO_CLK_SET(i_clk, pll1_clk, 1, 2); +SH_FIXED_RATIO_CLK_SET(b_clk, pll1_clk, 1, 12); +SH_FIXED_RATIO_CLK_SET(p_clk, pll1_clk, 1, 24); +SH_FIXED_RATIO_CLK_SET(cl_clk, pll1_clk, 1, 48); +SH_FIXED_RATIO_CLK_SET(m2_clk, pll1_clk, 1, 8); +SH_FIXED_RATIO_CLK_SET(imp_clk, pll1_clk, 1, 4); +SH_FIXED_RATIO_CLK_SET(rclk_clk, pll1_clk, 1, (48 * 1024)); +SH_FIXED_RATIO_CLK_SET(oscclk_clk, pll1_clk, 1, (12 * 1024)); + +SH_FIXED_RATIO_CLK_SET(zb3_clk, pll3_clk, 1, 4); +SH_FIXED_RATIO_CLK_SET(zb3d2_clk, pll3_clk, 1, 8); +SH_FIXED_RATIO_CLK_SET(ddr_clk, pll3_clk, 1, 8); +SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15); + static struct clk *main_clks[] = { + &extal_clk, + &extal_div2_clk, + &main_clk, + &pll1_clk, + &pll1_div2_clk, + &pll3_clk, + &lb_clk, + &qspi_clk, + &zg_clk, + &zx_clk, + &zs_clk, + &hp_clk, + &i_clk, + &b_clk, &p_clk, + &cl_clk, + &m2_clk, + &imp_clk, + &rclk_clk, + &oscclk_clk, + &zb3_clk, + &zb3d2_clk, + &ddr_clk, &mp_clk, + &cp_clk, +}; + +/* SDHI (DIV4) clock */ +static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10 }; + +static struct clk_div_mult_table div4_div_mult_table = { + .divisors = divisors, + .nr_divisors = ARRAY_SIZE(divisors), +}; + +static struct clk_div4_table div4_table = { + .div_mult_table = &div4_div_mult_table, +}; + +enum { + DIV4_SDH, DIV4_SD0, DIV4_SD1, DIV4_NR +}; + +static struct clk div4_clks[DIV4_NR] = { + [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT), + [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT), + [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT), +}; + +/* DIV6 clocks */ +enum { + DIV6_SD2, DIV6_SD3, + DIV6_MMC0, DIV6_MMC1, + DIV6_SSP, DIV6_SSPRS, + DIV6_NR +}; + +static struct clk div6_clks[DIV6_NR] = { + [DIV6_SD2] = SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0), + [DIV6_SD3] = SH_CLK_DIV6(&pll1_div2_clk, SD3CKCR, 0), + [DIV6_MMC0] = SH_CLK_DIV6(&pll1_div2_clk, MMC0CKCR, 0), + [DIV6_MMC1] = SH_CLK_DIV6(&pll1_div2_clk, MMC1CKCR, 0), + [DIV6_SSP] = SH_CLK_DIV6(&pll1_div2_clk, SSPCKCR, 0), + [DIV6_SSPRS] = SH_CLK_DIV6(&pll1_div2_clk, SSPRSCKCR, 0), +}; + +/* MSTP */ +enum { + MSTP721, MSTP720, + MSTP717, MSTP716, + MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304, + MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, + MSTP_NR }; -enum { MSTP721, MSTP720, - MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */ [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */ + [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */ + [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */ + [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */ + [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SD2], SMSTPCR3, 12, 0), /* SDHI2 */ + [MSTP311] = SH_CLK_MSTP32(&div6_clks[DIV6_SD3], SMSTPCR3, 11, 0), /* SDHI3 */ + [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1], SMSTPCR3, 5, 0), /* MMC1 */ + [MSTP304] = SH_CLK_MSTP32(&cp_clk, SMSTPCR3, 4, 0), /* TPU0 */ [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */ [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */ [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */ [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */ [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */ [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */ + [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */ + [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */ }; static struct clk_lookup lookups[] = { + + /* main clocks */ + CLKDEV_CON_ID("extal", &extal_clk), + CLKDEV_CON_ID("extal_div2", &extal_div2_clk), + CLKDEV_CON_ID("main", &main_clk), + CLKDEV_CON_ID("pll1", &pll1_clk), + CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk), + CLKDEV_CON_ID("pll3", &pll3_clk), + CLKDEV_CON_ID("zg", &zg_clk), + CLKDEV_CON_ID("zx", &zx_clk), + CLKDEV_CON_ID("zs", &zs_clk), + CLKDEV_CON_ID("hp", &hp_clk), + CLKDEV_CON_ID("i", &i_clk), + CLKDEV_CON_ID("b", &b_clk), + CLKDEV_CON_ID("lb", &lb_clk), + CLKDEV_CON_ID("p", &p_clk), + CLKDEV_CON_ID("cl", &cl_clk), + CLKDEV_CON_ID("m2", &m2_clk), + CLKDEV_CON_ID("imp", &imp_clk), + CLKDEV_CON_ID("rclk", &rclk_clk), + CLKDEV_CON_ID("oscclk", &oscclk_clk), + CLKDEV_CON_ID("zb3", &zb3_clk), + CLKDEV_CON_ID("zb3d2", &zb3d2_clk), + CLKDEV_CON_ID("ddr", &ddr_clk), + CLKDEV_CON_ID("mp", &mp_clk), + CLKDEV_CON_ID("qspi", &qspi_clk), + CLKDEV_CON_ID("cp", &cp_clk), + + /* DIV4 */ + CLKDEV_CON_ID("sdh", &div4_clks[DIV4_SDH]), + + /* DIV6 */ + CLKDEV_CON_ID("ssp", &div6_clks[DIV6_SSP]), + CLKDEV_CON_ID("ssprs", &div6_clks[DIV6_SSPRS]), + + /* MSTP */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), @@ -72,16 +252,77 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), + CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]), + CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]), + CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), + CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), + CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("ee160000.sdhi", &mstp_clks[MSTP311]), + CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]), + CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]), + CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), }; +#define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31) \ + extal_clk.rate = e * 1000 * 1000; \ + main_clk.parent = m; \ + SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1); \ + if (mode & MD(19)) \ + SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1); \ + else \ + SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1) + + void __init r8a7790_clock_init(void) { + void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); + u32 mode; int k, ret = 0; + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + switch (mode & (MD(14) | MD(13))) { + case 0: + R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88); + break; + case MD(13): + R8A7790_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66); + break; + case MD(14): + R8A7790_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102); + break; + case MD(13) | MD(14): + R8A7790_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88); + break; + } + + if (mode & (MD(18))) + SH_CLK_SET_RATIO(&lb_clk_ratio, 1, 36); + else + SH_CLK_SET_RATIO(&lb_clk_ratio, 1, 24); + + if ((mode & (MD(3) | MD(2) | MD(1))) == MD(2)) + SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 16); + else + SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 20); + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) ret = clk_register(main_clks[k]); if (!ret) + ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); + + if (!ret) + ret = sh_clk_div6_register(div6_clks, DIV6_NR); + + if (!ret) ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 784fbaa4cc5..d9fd0336b91 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -228,6 +228,11 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2, static struct clk div4_clks[DIV4_NR] = { [DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT), + /* + * ZG clock is dividing PLL0 frequency to supply SGX. Make sure not to + * exceed maximum frequencies of 201.5MHz for VDD_DVFS=1.175 and + * 239.2MHz for VDD_DVFS=1.315V. + */ [DIV4_ZG] = SH_CLK_DIV4(&pll0_clk, FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT), [DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT), [DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT), @@ -252,6 +257,101 @@ static struct clk twd_clk = { .ops = &twd_clk_ops, }; +static struct sh_clk_ops zclk_ops, kicker_ops; +static const struct sh_clk_ops *div4_clk_ops; + +static int zclk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret; + + if (!clk->parent || !__clk_get(clk->parent)) + return -ENODEV; + + if (readl(FRQCRB) & (1 << 31)) + return -EBUSY; + + if (rate == clk_get_rate(clk->parent)) { + /* 1:1 - switch off divider */ + __raw_writel(__raw_readl(FRQCRB) & ~(1 << 28), FRQCRB); + /* nullify the divider to prepare for the next time */ + ret = div4_clk_ops->set_rate(clk, rate / 2); + if (!ret) + ret = frqcr_kick(); + if (ret > 0) + ret = 0; + } else { + /* Enable the divider */ + __raw_writel(__raw_readl(FRQCRB) | (1 << 28), FRQCRB); + + ret = frqcr_kick(); + if (ret >= 0) + /* + * set the divider - call the DIV4 method, it will kick + * FRQCRB too + */ + ret = div4_clk_ops->set_rate(clk, rate); + if (ret < 0) + goto esetrate; + } + +esetrate: + __clk_put(clk->parent); + return ret; +} + +static long zclk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long div_freq = div4_clk_ops->round_rate(clk, rate), + parent_freq = clk_get_rate(clk->parent); + + if (rate > div_freq && abs(parent_freq - rate) < rate - div_freq) + return parent_freq; + + return div_freq; +} + +static unsigned long zclk_recalc(struct clk *clk) +{ + /* + * Must recalculate frequencies in case PLL0 has been changed, even if + * the divisor is unused ATM! + */ + unsigned long div_freq = div4_clk_ops->recalc(clk); + + if (__raw_readl(FRQCRB) & (1 << 28)) + return div_freq; + + return clk_get_rate(clk->parent); +} + +static int kicker_set_rate(struct clk *clk, unsigned long rate) +{ + if (__raw_readl(FRQCRB) & (1 << 31)) + return -EBUSY; + + return div4_clk_ops->set_rate(clk, rate); +} + +static void div4_clk_extend(void) +{ + int i; + + div4_clk_ops = div4_clks[0].ops; + + /* Add a kicker-busy check before changing the rate */ + kicker_ops = *div4_clk_ops; + /* We extend the DIV4 clock with a 1:1 pass-through case */ + zclk_ops = *div4_clk_ops; + + kicker_ops.set_rate = kicker_set_rate; + zclk_ops.set_rate = zclk_set_rate; + zclk_ops.round_rate = zclk_round_rate; + zclk_ops.recalc = zclk_recalc; + + for (i = 0; i < DIV4_NR; i++) + div4_clks[i].ops = i == DIV4_Z ? &zclk_ops : &kicker_ops; +} + enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1, DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2, DIV6_FSIA, DIV6_FSIB, DIV6_SUB, @@ -450,7 +550,7 @@ static struct clk *late_main_clks[] = { }; enum { MSTP001, - MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, + MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP112, MSTP100, MSTP219, MSTP218, MSTP217, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322, @@ -471,6 +571,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */ [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */ [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */ + [MSTP112] = MSTP(&div4_clks[DIV4_ZG], SMSTPCR1, 12, 0), /* SGX */ [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */ [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */ @@ -513,6 +614,9 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("r_clk", &r_clk), CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */ + /* DIV4 clocks */ + CLKDEV_DEV_ID("cpufreq-cpu0", &div4_clks[DIV4_Z]), + /* DIV6 clocks */ CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), @@ -604,8 +708,11 @@ void __init sh73a0_clock_init(void) for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) ret = clk_register(main_clks[k]); - if (!ret) + if (!ret) { ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); + if (!ret) + div4_clk_extend(); + } if (!ret) ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR); diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index 7d113f898e7..6f986546725 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -25,31 +25,24 @@ __CPUINIT /* - * Reset vector for secondary CPUs. + * Boot code for secondary CPUs. * * First we turn on L1 cache coherency for our CPU. Then we jump to * shmobile_invalidate_start that invalidates the cache and hands over control * to the common ARM startup code. - * This function will be mapped to address 0 by the SBAR register. - * A normal branch is out of range here so we need a long jump. We jump to - * the physical address as the MMU is still turned off. */ - .align 12 -ENTRY(shmobile_secondary_vector_scu) - mrc p15, 0, r0, c0, c0, 5 @ read MIPDR - and r0, r0, #3 @ mask out cpu ID - lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits - ldr r1, 2f - ldr r1, [r1] @ SCU base address - ldr r2, [r1, #8] @ SCU Power Status Register +ENTRY(shmobile_boot_scu) + @ r0 = SCU base address + mrc p15, 0, r1, c0, c0, 5 @ read MIPDR + and r1, r1, #3 @ mask out cpu ID + lsl r1, r1, #3 @ we will shift by cpu_id * 8 bits + ldr r2, [r0, #8] @ SCU Power Status Register mov r3, #3 - bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode) - str r2, [r1, #8] @ write back + bic r2, r2, r3, lsl r1 @ Clear bits of our CPU (Run Mode) + str r2, [r0, #8] @ write back - ldr pc, 1f -1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET -2: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET -ENDPROC(shmobile_secondary_vector_scu) + b shmobile_invalidate_start +ENDPROC(shmobile_boot_scu) .text .globl shmobile_scu_base diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 96001fd49b6..559d1ce5f57 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -27,7 +27,14 @@ ENDPROC(shmobile_invalidate_start) * We need _long_ jump to the physical address. */ .align 12 -ENTRY(shmobile_secondary_vector) +ENTRY(shmobile_boot_vector) + ldr r0, 2f ldr pc, 1f -1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET -ENDPROC(shmobile_secondary_vector) +ENDPROC(shmobile_boot_vector) + + .globl shmobile_boot_fn +shmobile_boot_fn: +1: .space 4 + .globl shmobile_boot_arg +shmobile_boot_arg: +2: .space 4 diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/include/mach/clock.h index 76ac61292e4..03e56074928 100644 --- a/arch/arm/mach-shmobile/include/mach/clock.h +++ b/arch/arm/mach-shmobile/include/mach/clock.h @@ -24,16 +24,16 @@ struct clk name = { \ } #define SH_FIXED_RATIO_CLK(name, p, r) \ -static SH_FIXED_RATIO_CLKg(name, p, r); +static SH_FIXED_RATIO_CLKg(name, p, r) #define SH_FIXED_RATIO_CLK_SET(name, p, m, d) \ SH_CLK_RATIO(name, m, d); \ - SH_FIXED_RATIO_CLK(name, p, name); + SH_FIXED_RATIO_CLK(name, p, name) #define SH_CLK_SET_RATIO(p, m, d) \ -{ \ +do { \ (p)->mul = m; \ (p)->div = d; \ -} +} while (0) #endif diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 4634a5d4b63..e818f029d8e 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -7,8 +7,10 @@ extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div); struct twd_local_timer; extern void shmobile_setup_console(void); -extern void shmobile_secondary_vector(void); -extern void shmobile_secondary_vector_scu(void); +extern void shmobile_boot_vector(void); +extern unsigned long shmobile_boot_fn; +extern unsigned long shmobile_boot_arg; +extern void shmobile_boot_scu(void); struct clk; extern int shmobile_clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); diff --git a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt deleted file mode 100644 index 9f134dfeffd..00000000000 --- a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt +++ /dev/null @@ -1,93 +0,0 @@ -LIST "partner-jet-setup.txt" -LIST "(C) Copyright 2010 Renesas Solutions Corp" -LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>" - -LIST "RWT Setting" -EW 0xE6020004, 0xA500 -EW 0xE6030004, 0xA500 - -LIST "GPIO Setting" -EB 0xE6051013, 0xA2 - -LIST "CPG" -ED 0xE61500C0, 0x00000002 - -WAIT 1, 0xFE40009C - -LIST "FRQCR" -ED 0xE6150000, 0x2D1305C3 -ED 0xE61500E0, 0x9E40358E -ED 0xE6150004, 0x80331050 - -WAIT 1, 0xFE40009C - -ED 0xE61500E4, 0x00002000 - -WAIT 1, 0xFE40009C - -LIST "PLL" -ED 0xE6150028, 0x00004000 - -WAIT 1, 0xFE40009C - -ED 0xE615002C, 0x93000040 - -WAIT 1, 0xFE40009C - -LIST "SUB/USBClk" -ED 0xE6150080, 0x00000180 - -LIST "BSC" -ED 0xFEC10000, 0x00E0001B - -LIST "SBSC1" -ED 0xFE400354, 0x01AD8000 -ED 0xFE400354, 0x01AD8001 - -WAIT 5, 0xFE40009C - -ED 0xFE400008, 0xBCC90151 -ED 0xFE400040, 0x41774113 -ED 0xFE400044, 0x2712E229 -ED 0xFE400048, 0x20C18505 -ED 0xFE40004C, 0x00110209 -ED 0xFE400010, 0x00000087 - -WAIT 30, 0xFE40009C - -ED 0xFE400084, 0x0000003F -EB 0xFE500000, 0x00 - -WAIT 5, 0xFE40009C - -ED 0xFE400084, 0x0000FF0A -EB 0xFE500000, 0x00 - -WAIT 1, 0xFE40009C - -ED 0xFE400084, 0x00002201 -EB 0xFE500000, 0x00 -ED 0xFE400084, 0x00000302 -EB 0xFE500000, 0x00 -EB 0xFE5C0000, 0x00 -ED 0xFE400008, 0xBCC90159 -ED 0xFE40008C, 0x88800004 -ED 0xFE400094, 0x00000004 -ED 0xFE400028, 0xA55A0032 -ED 0xFE40002C, 0xA55A000C -ED 0xFE400020, 0xA55A2048 -ED 0xFE400008, 0xBCC90959 - -LIST "Change CPGA setting" -ED 0xE61500E0, 0x9E40352E -ED 0xE6150004, 0x80331050 - -WAIT 1, 0xFE40009C - -ED 0xFE400354, 0x01AD8002 - -LIST "SCIF0 - Serial port for earlyprintk" -EB 0xE6053098, 0xe1 -EW 0xE6C40000, 0x0000 -EB 0xE6C40004, 0x19 -EW 0xE6C40008, 0x0030 diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index b2074e2acb1..d241bfd6926 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -16,4 +16,9 @@ #define IRQPIN_BASE 2000 #define irq_pin(nr) ((nr) + IRQPIN_BASE) +/* GPIO IRQ */ +#define _GPIO_IRQ_BASE 2500 +#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x)) +#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y) + #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h deleted file mode 100644 index 0ffbe8155c7..00000000000 --- a/arch/arm/mach-shmobile/include/mach/memory.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_MEMORY_H -#define __ASM_MACH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START) -#define MEM_SIZE UL(CONFIG_MEMORY_SIZE) - -#endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h b/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h deleted file mode 100644 index db59fdbda86..00000000000 --- a/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef MMC_AP4EB_H -#define MMC_AP4EB_H - -#define PORT185CR (void __iomem *)0xe60520b9 -#define PORT186CR (void __iomem *)0xe60520ba -#define PORT187CR (void __iomem *)0xe60520bb -#define PORT188CR (void __iomem *)0xe60520bc - -#define PORTR191_160DR (void __iomem *)0xe6056014 - -static inline void mmc_init_progress(void) -{ - /* Initialise LEDS1-4 - * registers: PORT185CR-PORT188CR (LED1-LED4 Control) - * value: 0x10 - enable output - */ - __raw_writeb(0x10, PORT185CR); - __raw_writeb(0x10, PORT186CR); - __raw_writeb(0x10, PORT187CR); - __raw_writeb(0x10, PORT188CR); -} - -static inline void mmc_update_progress(int n) -{ - __raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) | - (1 << (25 + n)), PORTR191_160DR); -} - -#endif /* MMC_AP4EB_H */ diff --git a/arch/arm/mach-shmobile/include/mach/mmc.h b/arch/arm/mach-shmobile/include/mach/mmc.h index 21a59db638b..e979b8fc1da 100644 --- a/arch/arm/mach-shmobile/include/mach/mmc.h +++ b/arch/arm/mach-shmobile/include/mach/mmc.h @@ -7,9 +7,7 @@ * **************************************************/ -#ifdef CONFIG_MACH_AP4EVB -#include "mach/mmc-ap4eb.h" -#elif defined(CONFIG_MACH_MACKEREL) +#ifdef CONFIG_MACH_MACKEREL #include "mach/mmc-mackerel.h" #else #error "unsupported board." diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index abdc4d4efa2..9c9a66ccaf6 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -28,494 +28,6 @@ #define MD_CK1 (1 << 1) #define MD_CK0 (1 << 0) -/* - * Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* PORT */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119, - - GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124, - GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169, - - GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174, - GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179, - - GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184, - GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189, - - GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, - GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, - - GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, - GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, - - GPIO_PORT210, GPIO_PORT211, - - /* IRQ */ - GPIO_FN_IRQ0_PORT2, GPIO_FN_IRQ0_PORT13, - GPIO_FN_IRQ1, - GPIO_FN_IRQ2_PORT11, GPIO_FN_IRQ2_PORT12, - GPIO_FN_IRQ3_PORT10, GPIO_FN_IRQ3_PORT14, - GPIO_FN_IRQ4_PORT15, GPIO_FN_IRQ4_PORT172, - GPIO_FN_IRQ5_PORT0, GPIO_FN_IRQ5_PORT1, - GPIO_FN_IRQ6_PORT121, GPIO_FN_IRQ6_PORT173, - GPIO_FN_IRQ7_PORT120, GPIO_FN_IRQ7_PORT209, - GPIO_FN_IRQ8, - GPIO_FN_IRQ9_PORT118, GPIO_FN_IRQ9_PORT210, - GPIO_FN_IRQ10, - GPIO_FN_IRQ11, - GPIO_FN_IRQ12_PORT42, GPIO_FN_IRQ12_PORT97, - GPIO_FN_IRQ13_PORT64, GPIO_FN_IRQ13_PORT98, - GPIO_FN_IRQ14_PORT63, GPIO_FN_IRQ14_PORT99, - GPIO_FN_IRQ15_PORT62, GPIO_FN_IRQ15_PORT100, - GPIO_FN_IRQ16_PORT68, GPIO_FN_IRQ16_PORT211, - GPIO_FN_IRQ17, - GPIO_FN_IRQ18, - GPIO_FN_IRQ19, - GPIO_FN_IRQ20, - GPIO_FN_IRQ21, - GPIO_FN_IRQ22, - GPIO_FN_IRQ23, - GPIO_FN_IRQ24, - GPIO_FN_IRQ25, - GPIO_FN_IRQ26_PORT58, GPIO_FN_IRQ26_PORT81, - GPIO_FN_IRQ27_PORT57, GPIO_FN_IRQ27_PORT168, - GPIO_FN_IRQ28_PORT56, GPIO_FN_IRQ28_PORT169, - GPIO_FN_IRQ29_PORT50, GPIO_FN_IRQ29_PORT170, - GPIO_FN_IRQ30_PORT49, GPIO_FN_IRQ30_PORT171, - GPIO_FN_IRQ31_PORT41, GPIO_FN_IRQ31_PORT167, - - /* Function */ - - /* DBGT */ - GPIO_FN_DBGMDT2, GPIO_FN_DBGMDT1, GPIO_FN_DBGMDT0, - GPIO_FN_DBGMD10, GPIO_FN_DBGMD11, GPIO_FN_DBGMD20, - GPIO_FN_DBGMD21, - - /* FSI-A */ - GPIO_FN_FSIAISLD_PORT0, /* FSIAISLD Port 0/5 */ - GPIO_FN_FSIAISLD_PORT5, - GPIO_FN_FSIASPDIF_PORT9, /* FSIASPDIF Port 9/18 */ - GPIO_FN_FSIASPDIF_PORT18, - GPIO_FN_FSIAOSLD1, GPIO_FN_FSIAOSLD2, - GPIO_FN_FSIAOLR, GPIO_FN_FSIAOBT, - GPIO_FN_FSIAOSLD, GPIO_FN_FSIAOMC, - GPIO_FN_FSIACK, GPIO_FN_FSIAILR, - GPIO_FN_FSIAIBT, - - /* FSI-B */ - GPIO_FN_FSIBCK, - - /* FMSI */ - GPIO_FN_FMSISLD_PORT1, /* FMSISLD Port 1/6 */ - GPIO_FN_FMSISLD_PORT6, - GPIO_FN_FMSIILR, GPIO_FN_FMSIIBT, - GPIO_FN_FMSIOLR, GPIO_FN_FMSIOBT, - GPIO_FN_FMSICK, GPIO_FN_FMSOILR, - GPIO_FN_FMSOIBT, GPIO_FN_FMSOOLR, - GPIO_FN_FMSOOBT, GPIO_FN_FMSOSLD, - GPIO_FN_FMSOCK, - - /* SCIFA0 */ - GPIO_FN_SCIFA0_SCK, GPIO_FN_SCIFA0_CTS, - GPIO_FN_SCIFA0_RTS, GPIO_FN_SCIFA0_RXD, - GPIO_FN_SCIFA0_TXD, - - /* SCIFA1 */ - GPIO_FN_SCIFA1_CTS, GPIO_FN_SCIFA1_SCK, - GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_TXD, - GPIO_FN_SCIFA1_RTS, - - /* SCIFA2 */ - GPIO_FN_SCIFA2_SCK_PORT22, /* SCIFA2_SCK Port 22/199 */ - GPIO_FN_SCIFA2_SCK_PORT199, - GPIO_FN_SCIFA2_RXD, GPIO_FN_SCIFA2_TXD, - GPIO_FN_SCIFA2_CTS, GPIO_FN_SCIFA2_RTS, - - /* SCIFA3 */ - GPIO_FN_SCIFA3_RTS_PORT105, /* MSEL5CR_8_0 */ - GPIO_FN_SCIFA3_SCK_PORT116, - GPIO_FN_SCIFA3_CTS_PORT117, - GPIO_FN_SCIFA3_RXD_PORT174, - GPIO_FN_SCIFA3_TXD_PORT175, - - GPIO_FN_SCIFA3_RTS_PORT161, /* MSEL5CR_8_1 */ - GPIO_FN_SCIFA3_SCK_PORT158, - GPIO_FN_SCIFA3_CTS_PORT162, - GPIO_FN_SCIFA3_RXD_PORT159, - GPIO_FN_SCIFA3_TXD_PORT160, - - /* SCIFA4 */ - GPIO_FN_SCIFA4_RXD_PORT12, /* MSEL5CR[12:11] = 00 */ - GPIO_FN_SCIFA4_TXD_PORT13, - - GPIO_FN_SCIFA4_RXD_PORT204, /* MSEL5CR[12:11] = 01 */ - GPIO_FN_SCIFA4_TXD_PORT203, - - GPIO_FN_SCIFA4_RXD_PORT94, /* MSEL5CR[12:11] = 10 */ - GPIO_FN_SCIFA4_TXD_PORT93, - - GPIO_FN_SCIFA4_SCK_PORT21, /* SCIFA4_SCK Port 21/205 */ - GPIO_FN_SCIFA4_SCK_PORT205, - - /* SCIFA5 */ - GPIO_FN_SCIFA5_TXD_PORT20, /* MSEL5CR[15:14] = 00 */ - GPIO_FN_SCIFA5_RXD_PORT10, - - GPIO_FN_SCIFA5_RXD_PORT207, /* MSEL5CR[15:14] = 01 */ - GPIO_FN_SCIFA5_TXD_PORT208, - - GPIO_FN_SCIFA5_TXD_PORT91, /* MSEL5CR[15:14] = 10 */ - GPIO_FN_SCIFA5_RXD_PORT92, - - GPIO_FN_SCIFA5_SCK_PORT23, /* SCIFA5_SCK Port 23/206 */ - GPIO_FN_SCIFA5_SCK_PORT206, - - /* SCIFA6 */ - GPIO_FN_SCIFA6_SCK, GPIO_FN_SCIFA6_RXD, GPIO_FN_SCIFA6_TXD, - - /* SCIFA7 */ - GPIO_FN_SCIFA7_TXD, GPIO_FN_SCIFA7_RXD, - - /* SCIFAB */ - GPIO_FN_SCIFB_SCK_PORT190, /* MSEL5CR_17_0 */ - GPIO_FN_SCIFB_RXD_PORT191, - GPIO_FN_SCIFB_TXD_PORT192, - GPIO_FN_SCIFB_RTS_PORT186, - GPIO_FN_SCIFB_CTS_PORT187, - - GPIO_FN_SCIFB_SCK_PORT2, /* MSEL5CR_17_1 */ - GPIO_FN_SCIFB_RXD_PORT3, - GPIO_FN_SCIFB_TXD_PORT4, - GPIO_FN_SCIFB_RTS_PORT172, - GPIO_FN_SCIFB_CTS_PORT173, - - /* LCD0 */ - GPIO_FN_LCDC0_SELECT, - - /* LCD1 */ - GPIO_FN_LCDC1_SELECT, - - /* RSPI */ - GPIO_FN_RSPI_SSL0_A, GPIO_FN_RSPI_SSL1_A, - GPIO_FN_RSPI_SSL2_A, GPIO_FN_RSPI_SSL3_A, - GPIO_FN_RSPI_MOSI_A, GPIO_FN_RSPI_MISO_A, - GPIO_FN_RSPI_CK_A, - - /* VIO CKO */ - GPIO_FN_VIO_CKO1, - GPIO_FN_VIO_CKO2, - GPIO_FN_VIO_CKO_1, - GPIO_FN_VIO_CKO, - - /* VIO0 */ - GPIO_FN_VIO0_D0, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D2, - GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D4, GPIO_FN_VIO0_D5, - GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D8, - GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D11, - GPIO_FN_VIO0_D12, GPIO_FN_VIO0_VD, GPIO_FN_VIO0_HD, - GPIO_FN_VIO0_CLK, GPIO_FN_VIO0_FIELD, - - GPIO_FN_VIO0_D13_PORT26, /* MSEL5CR_27_0 */ - GPIO_FN_VIO0_D14_PORT25, - GPIO_FN_VIO0_D15_PORT24, - - GPIO_FN_VIO0_D13_PORT22, /* MSEL5CR_27_1 */ - GPIO_FN_VIO0_D14_PORT95, - GPIO_FN_VIO0_D15_PORT96, - - /* VIO1 */ - GPIO_FN_VIO1_D0, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D2, - GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D4, GPIO_FN_VIO1_D5, - GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D7, GPIO_FN_VIO1_VD, - GPIO_FN_VIO1_HD, GPIO_FN_VIO1_CLK, GPIO_FN_VIO1_FIELD, - - /* TPU0 */ - GPIO_FN_TPU0TO0, GPIO_FN_TPU0TO1, - GPIO_FN_TPU0TO3, - GPIO_FN_TPU0TO2_PORT66, /* TPU0TO2 Port 66/202 */ - GPIO_FN_TPU0TO2_PORT202, - - /* SSP1 0 */ - GPIO_FN_STP0_IPD0, GPIO_FN_STP0_IPD1, GPIO_FN_STP0_IPD2, - GPIO_FN_STP0_IPD3, GPIO_FN_STP0_IPD4, GPIO_FN_STP0_IPD5, - GPIO_FN_STP0_IPD6, GPIO_FN_STP0_IPD7, GPIO_FN_STP0_IPEN, - GPIO_FN_STP0_IPCLK, GPIO_FN_STP0_IPSYNC, - - /* SSP1 1 */ - GPIO_FN_STP1_IPD1, GPIO_FN_STP1_IPD2, GPIO_FN_STP1_IPD3, - GPIO_FN_STP1_IPD4, GPIO_FN_STP1_IPD5, GPIO_FN_STP1_IPD6, - GPIO_FN_STP1_IPD7, GPIO_FN_STP1_IPCLK, GPIO_FN_STP1_IPSYNC, - - GPIO_FN_STP1_IPD0_PORT186, /* MSEL5CR_23_0 */ - GPIO_FN_STP1_IPEN_PORT187, - - GPIO_FN_STP1_IPD0_PORT194, /* MSEL5CR_23_1 */ - GPIO_FN_STP1_IPEN_PORT193, - - /* SIM */ - GPIO_FN_SIM_RST, GPIO_FN_SIM_CLK, - GPIO_FN_SIM_D_PORT22, /* SIM_D Port 22/199 */ - GPIO_FN_SIM_D_PORT199, - - /* MSIOF2 */ - GPIO_FN_MSIOF2_TXD, GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TSCK, - GPIO_FN_MSIOF2_SS2, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_SS1, - GPIO_FN_MSIOF2_MCK1, GPIO_FN_MSIOF2_MCK0, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_MSIOF2_RSCK, - - /* KEYSC */ - GPIO_FN_KEYIN4, GPIO_FN_KEYIN5, - GPIO_FN_KEYIN6, GPIO_FN_KEYIN7, - GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2, - GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4, GPIO_FN_KEYOUT5, - GPIO_FN_KEYOUT6, GPIO_FN_KEYOUT7, - - GPIO_FN_KEYIN0_PORT43, /* MSEL4CR_18_0 */ - GPIO_FN_KEYIN1_PORT44, - GPIO_FN_KEYIN2_PORT45, - GPIO_FN_KEYIN3_PORT46, - - GPIO_FN_KEYIN0_PORT58, /* MSEL4CR_18_1 */ - GPIO_FN_KEYIN1_PORT57, - GPIO_FN_KEYIN2_PORT56, - GPIO_FN_KEYIN3_PORT55, - - /* VOU */ - GPIO_FN_DV_D0, GPIO_FN_DV_D1, GPIO_FN_DV_D2, GPIO_FN_DV_D3, - GPIO_FN_DV_D4, GPIO_FN_DV_D5, GPIO_FN_DV_D6, GPIO_FN_DV_D7, - GPIO_FN_DV_D8, GPIO_FN_DV_D9, GPIO_FN_DV_D10, GPIO_FN_DV_D11, - GPIO_FN_DV_D12, GPIO_FN_DV_D13, GPIO_FN_DV_D14, GPIO_FN_DV_D15, - GPIO_FN_DV_CLK, - GPIO_FN_DV_VSYNC, - GPIO_FN_DV_HSYNC, - - /* MEMC */ - GPIO_FN_MEMC_AD0, GPIO_FN_MEMC_AD1, GPIO_FN_MEMC_AD2, - GPIO_FN_MEMC_AD3, GPIO_FN_MEMC_AD4, GPIO_FN_MEMC_AD5, - GPIO_FN_MEMC_AD6, GPIO_FN_MEMC_AD7, GPIO_FN_MEMC_AD8, - GPIO_FN_MEMC_AD9, GPIO_FN_MEMC_AD10, GPIO_FN_MEMC_AD11, - GPIO_FN_MEMC_AD12, GPIO_FN_MEMC_AD13, GPIO_FN_MEMC_AD14, - GPIO_FN_MEMC_AD15, GPIO_FN_MEMC_CS0, GPIO_FN_MEMC_INT, - GPIO_FN_MEMC_NWE, GPIO_FN_MEMC_NOE, - - GPIO_FN_MEMC_CS1, /* MSEL4CR_6_0 */ - GPIO_FN_MEMC_ADV, - GPIO_FN_MEMC_WAIT, - GPIO_FN_MEMC_BUSCLK, - - GPIO_FN_MEMC_A1, /* MSEL4CR_6_1 */ - GPIO_FN_MEMC_DREQ0, - GPIO_FN_MEMC_DREQ1, - GPIO_FN_MEMC_A0, - - /* MSIOF0 */ - GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2, - GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD, - GPIO_FN_MSIOF0_MCK0, GPIO_FN_MSIOF0_MCK1, - GPIO_FN_MSIOF0_RSYNC, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_MSIOF0_TSCK, GPIO_FN_MSIOF0_TSYNC, - - /* MSIOF1 */ - GPIO_FN_MSIOF1_RSCK, GPIO_FN_MSIOF1_RSYNC, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1, - - GPIO_FN_MSIOF1_SS2_PORT116, GPIO_FN_MSIOF1_SS1_PORT117, - GPIO_FN_MSIOF1_RXD_PORT118, GPIO_FN_MSIOF1_TXD_PORT119, - GPIO_FN_MSIOF1_TSYNC_PORT120, - GPIO_FN_MSIOF1_TSCK_PORT121, /* MSEL4CR_10_0 */ - - GPIO_FN_MSIOF1_SS1_PORT67, GPIO_FN_MSIOF1_TSCK_PORT72, - GPIO_FN_MSIOF1_TSYNC_PORT73, GPIO_FN_MSIOF1_TXD_PORT74, - GPIO_FN_MSIOF1_RXD_PORT75, - GPIO_FN_MSIOF1_SS2_PORT202, /* MSEL4CR_10_1 */ - - /* GPIO */ - GPIO_FN_GPO0, GPIO_FN_GPI0, - GPIO_FN_GPO1, GPIO_FN_GPI1, - - /* USB0 */ - GPIO_FN_USB0_OCI, GPIO_FN_USB0_PPON, GPIO_FN_VBUS, - - /* USB1 */ - GPIO_FN_USB1_OCI, GPIO_FN_USB1_PPON, - - /* BBIF1 */ - GPIO_FN_BBIF1_RXD, GPIO_FN_BBIF1_TXD, GPIO_FN_BBIF1_TSYNC, - GPIO_FN_BBIF1_TSCK, GPIO_FN_BBIF1_RSCK, GPIO_FN_BBIF1_RSYNC, - GPIO_FN_BBIF1_FLOW, GPIO_FN_BBIF1_RX_FLOW_N, - - /* BBIF2 */ - GPIO_FN_BBIF2_TXD2_PORT5, /* MSEL5CR_0_0 */ - GPIO_FN_BBIF2_RXD2_PORT60, - GPIO_FN_BBIF2_TSYNC2_PORT6, - GPIO_FN_BBIF2_TSCK2_PORT59, - - GPIO_FN_BBIF2_RXD2_PORT90, /* MSEL5CR_0_1 */ - GPIO_FN_BBIF2_TXD2_PORT183, - GPIO_FN_BBIF2_TSCK2_PORT89, - GPIO_FN_BBIF2_TSYNC2_PORT184, - - /* BSC / FLCTL / PCMCIA */ - GPIO_FN_CS0, GPIO_FN_CS2, GPIO_FN_CS4, - GPIO_FN_CS5B, GPIO_FN_CS6A, - GPIO_FN_CS5A_PORT105, /* CS5A PORT 19/105 */ - GPIO_FN_CS5A_PORT19, - GPIO_FN_IOIS16, /* ? */ - - GPIO_FN_A0, GPIO_FN_A1, GPIO_FN_A2, GPIO_FN_A3, - GPIO_FN_A4_FOE, /* share with FLCTL */ - GPIO_FN_A5_FCDE, /* share with FLCTL */ - GPIO_FN_A6, GPIO_FN_A7, GPIO_FN_A8, GPIO_FN_A9, - GPIO_FN_A10, GPIO_FN_A11, GPIO_FN_A12, GPIO_FN_A13, - GPIO_FN_A14, GPIO_FN_A15, GPIO_FN_A16, GPIO_FN_A17, - GPIO_FN_A18, GPIO_FN_A19, GPIO_FN_A20, GPIO_FN_A21, - GPIO_FN_A22, GPIO_FN_A23, GPIO_FN_A24, GPIO_FN_A25, - GPIO_FN_A26, - - GPIO_FN_D0_NAF0, GPIO_FN_D1_NAF1, /* share with FLCTL */ - GPIO_FN_D2_NAF2, GPIO_FN_D3_NAF3, /* share with FLCTL */ - GPIO_FN_D4_NAF4, GPIO_FN_D5_NAF5, /* share with FLCTL */ - GPIO_FN_D6_NAF6, GPIO_FN_D7_NAF7, /* share with FLCTL */ - GPIO_FN_D8_NAF8, GPIO_FN_D9_NAF9, /* share with FLCTL */ - GPIO_FN_D10_NAF10, GPIO_FN_D11_NAF11, /* share with FLCTL */ - GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, /* share with FLCTL */ - GPIO_FN_D14_NAF14, GPIO_FN_D15_NAF15, /* share with FLCTL */ - - GPIO_FN_D16, GPIO_FN_D17, GPIO_FN_D18, GPIO_FN_D19, - GPIO_FN_D20, GPIO_FN_D21, GPIO_FN_D22, GPIO_FN_D23, - GPIO_FN_D24, GPIO_FN_D25, GPIO_FN_D26, GPIO_FN_D27, - GPIO_FN_D28, GPIO_FN_D29, GPIO_FN_D30, GPIO_FN_D31, - - GPIO_FN_WE0_FWE, /* share with FLCTL */ - GPIO_FN_WE1, - GPIO_FN_WE2_ICIORD, /* share with PCMCIA */ - GPIO_FN_WE3_ICIOWR, /* share with PCMCIA */ - GPIO_FN_CKO, GPIO_FN_BS, GPIO_FN_RDWR, - GPIO_FN_RD_FSC, /* share with FLCTL */ - GPIO_FN_WAIT_PORT177, /* WAIT Port 90/177 */ - GPIO_FN_WAIT_PORT90, - - GPIO_FN_FCE0, GPIO_FN_FCE1, GPIO_FN_FRB, /* FLCTL */ - - /* IRDA */ - GPIO_FN_IRDA_FIRSEL, GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT, - - /* ATAPI */ - GPIO_FN_IDE_D0, GPIO_FN_IDE_D1, GPIO_FN_IDE_D2, - GPIO_FN_IDE_D3, GPIO_FN_IDE_D4, GPIO_FN_IDE_D5, - GPIO_FN_IDE_D6, GPIO_FN_IDE_D7, GPIO_FN_IDE_D8, - GPIO_FN_IDE_D9, GPIO_FN_IDE_D10, GPIO_FN_IDE_D11, - GPIO_FN_IDE_D12, GPIO_FN_IDE_D13, GPIO_FN_IDE_D14, - GPIO_FN_IDE_D15, GPIO_FN_IDE_A0, GPIO_FN_IDE_A1, - GPIO_FN_IDE_A2, GPIO_FN_IDE_CS0, GPIO_FN_IDE_CS1, - GPIO_FN_IDE_IOWR, GPIO_FN_IDE_IORD, GPIO_FN_IDE_IORDY, - GPIO_FN_IDE_INT, GPIO_FN_IDE_RST, GPIO_FN_IDE_DIRECTION, - GPIO_FN_IDE_EXBUF_ENB, GPIO_FN_IDE_IODACK, GPIO_FN_IDE_IODREQ, - - /* RMII */ - GPIO_FN_RMII_CRS_DV, GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_RXD0, - GPIO_FN_RMII_RXD1, GPIO_FN_RMII_TX_EN, GPIO_FN_RMII_TXD0, - GPIO_FN_RMII_MDC, GPIO_FN_RMII_TXD1, GPIO_FN_RMII_MDIO, - GPIO_FN_RMII_REF50CK, /* for RMII */ - GPIO_FN_RMII_REF125CK, /* for GMII */ - - /* GEther */ - GPIO_FN_ET_TX_CLK, GPIO_FN_ET_TX_EN, GPIO_FN_ET_ETXD0, - GPIO_FN_ET_ETXD1, GPIO_FN_ET_ETXD2, GPIO_FN_ET_ETXD3, - GPIO_FN_ET_ETXD4, GPIO_FN_ET_ETXD5, /* for GEther */ - GPIO_FN_ET_ETXD6, GPIO_FN_ET_ETXD7, /* for GEther */ - GPIO_FN_ET_COL, GPIO_FN_ET_TX_ER, - GPIO_FN_ET_RX_CLK, GPIO_FN_ET_RX_DV, - GPIO_FN_ET_ERXD0, GPIO_FN_ET_ERXD1, - GPIO_FN_ET_ERXD2, GPIO_FN_ET_ERXD3, - GPIO_FN_ET_ERXD4, GPIO_FN_ET_ERXD5, /* for GEther */ - GPIO_FN_ET_ERXD6, GPIO_FN_ET_ERXD7, /* for GEther */ - GPIO_FN_ET_RX_ER, GPIO_FN_ET_CRS, - GPIO_FN_ET_MDC, GPIO_FN_ET_MDIO, - GPIO_FN_ET_LINK, GPIO_FN_ET_PHY_INT, - GPIO_FN_ET_WOL, GPIO_FN_ET_GTX_CLK, - - /* DMA0 */ - GPIO_FN_DREQ0, GPIO_FN_DACK0, - - /* DMA1 */ - GPIO_FN_DREQ1, GPIO_FN_DACK1, - - /* SYSC */ - GPIO_FN_RESETOUTS, - GPIO_FN_RESETP_PULLUP, - GPIO_FN_RESETP_PLAIN, - - /* HDMI */ - GPIO_FN_HDMI_HPD, - GPIO_FN_HDMI_CEC, - - /* SDENC */ - GPIO_FN_SDENC_CPG, - GPIO_FN_SDENC_DV_CLKI, - - /* IRREM */ - GPIO_FN_IROUT, - - /* DEBUG */ - GPIO_FN_EDEBGREQ_PULLDOWN, - GPIO_FN_EDEBGREQ_PULLUP, - - GPIO_FN_TRACEAUD_FROM_VIO, - GPIO_FN_TRACEAUD_FROM_LCDC0, - GPIO_FN_TRACEAUD_FROM_MEMC, -}; - /* DMA slave IDs */ enum { SHDMA_SLAVE_INVALID, diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index 951149e6bcc..851d027a2f0 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -18,15 +18,26 @@ #ifndef __ASM_R8A7778_H__ #define __ASM_R8A7778_H__ +#include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/sh_eth.h> +#include <linux/platform_data/usb-rcar-phy.h> extern void r8a7778_add_standard_devices(void); extern void r8a7778_add_standard_devices_dt(void); extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata); +extern void r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata); +extern void r8a7778_add_i2c_device(int id); +extern void r8a7778_add_hspi_device(int id); +extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info); + +extern void r8a7778_init_late(void); extern void r8a7778_init_delay(void); extern void r8a7778_init_irq(void); extern void r8a7778_init_irq_dt(void); extern void r8a7778_clock_init(void); extern void r8a7778_init_irq_extpin(int irlm); +extern void r8a7778_pinmux_init(void); +extern void r8a7778_sdhi_init(int id, struct sh_mobile_sdhi_info *info); #endif /* __ASM_R8A7778_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h index 188b295938a..fc47073c7ba 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h @@ -4,6 +4,7 @@ #include <linux/sh_clk.h> #include <linux/pm_domain.h> #include <linux/sh_eth.h> +#include <linux/platform_data/usb-rcar-phy.h> struct platform_device; @@ -33,6 +34,8 @@ extern void r8a7779_add_early_devices(void); extern void r8a7779_add_standard_devices(void); extern void r8a7779_add_standard_devices_dt(void); extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata); +extern void r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata); +extern void r8a7779_init_late(void); extern void r8a7779_clock_init(void); extern void r8a7779_pinmux_init(void); extern void r8a7779_pm_init(void); diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index fd7cba024c3..854a9f0ca04 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -15,397 +15,6 @@ #include <linux/pm_domain.h> #include <mach/pm-rmobile.h> -/* - * Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* PORT */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119, - - GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124, - GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169, - - GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174, - GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179, - - GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184, - GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189, - - GPIO_PORT190, - - /* IRQ */ - GPIO_FN_IRQ0_6, /* PORT 6 */ - GPIO_FN_IRQ0_162, /* PORT 162 */ - GPIO_FN_IRQ1, /* PORT 12 */ - GPIO_FN_IRQ2_4, /* PORT 4 */ - GPIO_FN_IRQ2_5, /* PORT 5 */ - GPIO_FN_IRQ3_8, /* PORT 8 */ - GPIO_FN_IRQ3_16, /* PORT 16 */ - GPIO_FN_IRQ4_17, /* PORT 17 */ - GPIO_FN_IRQ4_163, /* PORT 163 */ - GPIO_FN_IRQ5, /* PORT 18 */ - GPIO_FN_IRQ6_39, /* PORT 39 */ - GPIO_FN_IRQ6_164, /* PORT 164 */ - GPIO_FN_IRQ7_40, /* PORT 40 */ - GPIO_FN_IRQ7_167, /* PORT 167 */ - GPIO_FN_IRQ8_41, /* PORT 41 */ - GPIO_FN_IRQ8_168, /* PORT 168 */ - GPIO_FN_IRQ9_42, /* PORT 42 */ - GPIO_FN_IRQ9_169, /* PORT 169 */ - GPIO_FN_IRQ10, /* PORT 65 */ - GPIO_FN_IRQ11, /* PORT 67 */ - GPIO_FN_IRQ12_80, /* PORT 80 */ - GPIO_FN_IRQ12_137, /* PORT 137 */ - GPIO_FN_IRQ13_81, /* PORT 81 */ - GPIO_FN_IRQ13_145, /* PORT 145 */ - GPIO_FN_IRQ14_82, /* PORT 82 */ - GPIO_FN_IRQ14_146, /* PORT 146 */ - GPIO_FN_IRQ15_83, /* PORT 83 */ - GPIO_FN_IRQ15_147, /* PORT 147 */ - GPIO_FN_IRQ16_84, /* PORT 84 */ - GPIO_FN_IRQ16_170, /* PORT 170 */ - GPIO_FN_IRQ17, /* PORT 85 */ - GPIO_FN_IRQ18, /* PORT 86 */ - GPIO_FN_IRQ19, /* PORT 87 */ - GPIO_FN_IRQ20, /* PORT 92 */ - GPIO_FN_IRQ21, /* PORT 93 */ - GPIO_FN_IRQ22, /* PORT 94 */ - GPIO_FN_IRQ23, /* PORT 95 */ - GPIO_FN_IRQ24, /* PORT 112 */ - GPIO_FN_IRQ25, /* PORT 119 */ - GPIO_FN_IRQ26_121, /* PORT 121 */ - GPIO_FN_IRQ26_172, /* PORT 172 */ - GPIO_FN_IRQ27_122, /* PORT 122 */ - GPIO_FN_IRQ27_180, /* PORT 180 */ - GPIO_FN_IRQ28_123, /* PORT 123 */ - GPIO_FN_IRQ28_181, /* PORT 181 */ - GPIO_FN_IRQ29_129, /* PORT 129 */ - GPIO_FN_IRQ29_182, /* PORT 182 */ - GPIO_FN_IRQ30_130, /* PORT 130 */ - GPIO_FN_IRQ30_183, /* PORT 183 */ - GPIO_FN_IRQ31_138, /* PORT 138 */ - GPIO_FN_IRQ31_184, /* PORT 184 */ - - /* - * MSIOF0 (PORT 36, 37, 38, 39 - * 40, 41, 42, 43, 44, 45) - */ - GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_TSCK, - GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_MSIOF0_RSYNC, GPIO_FN_MSIOF0_MCK0, - GPIO_FN_MSIOF0_MCK1, GPIO_FN_MSIOF0_SS1, - GPIO_FN_MSIOF0_SS2, GPIO_FN_MSIOF0_TXD, - - /* - * MSIOF1 (PORT 39, 40, 41, 42, 43, 44 - * 84, 85, 86, 87, 88, 89, 90, 91, 92, 93) - */ - GPIO_FN_MSIOF1_TSCK_39, GPIO_FN_MSIOF1_TSYNC_40, - GPIO_FN_MSIOF1_TSCK_88, GPIO_FN_MSIOF1_TSYNC_89, - GPIO_FN_MSIOF1_TXD_41, GPIO_FN_MSIOF1_RXD_42, - GPIO_FN_MSIOF1_TXD_90, GPIO_FN_MSIOF1_RXD_91, - GPIO_FN_MSIOF1_SS1_43, GPIO_FN_MSIOF1_SS2_44, - GPIO_FN_MSIOF1_SS1_92, GPIO_FN_MSIOF1_SS2_93, - GPIO_FN_MSIOF1_RSCK, GPIO_FN_MSIOF1_RSYNC, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1, - - /* - * MSIOF2 (PORT 134, 135, 136, 137, 138, 139 - * 148, 149, 150, 151) - */ - GPIO_FN_MSIOF2_RSCK, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_MSIOF2_MCK0, GPIO_FN_MSIOF2_MCK1, - GPIO_FN_MSIOF2_SS1, GPIO_FN_MSIOF2_SS2, - GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_TSCK, - GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TXD, - - /* MSIOF3 (PORT 76, 77, 78, 79, 80, 81, 82, 83) */ - GPIO_FN_BBIF1_RXD, GPIO_FN_BBIF1_TSYNC, - GPIO_FN_BBIF1_TSCK, GPIO_FN_BBIF1_TXD, - GPIO_FN_BBIF1_RSCK, GPIO_FN_BBIF1_RSYNC, - GPIO_FN_BBIF1_FLOW, GPIO_FN_BB_RX_FLOW_N, - - /* MSIOF4 (PORT 0, 1, 2, 3) */ - GPIO_FN_BBIF2_TSCK1, GPIO_FN_BBIF2_TSYNC1, - GPIO_FN_BBIF2_TXD1, GPIO_FN_BBIF2_RXD, - - /* FSI (PORT 4, 5, 6, 7, 8, 9, 10, 11, 15) */ - GPIO_FN_FSIACK, GPIO_FN_FSIBCK, - GPIO_FN_FSIAILR, GPIO_FN_FSIAIBT, - GPIO_FN_FSIAISLD, GPIO_FN_FSIAOMC, - GPIO_FN_FSIAOLR, GPIO_FN_FSIAOBT, - GPIO_FN_FSIAOSLD, GPIO_FN_FSIASPDIF_11, - GPIO_FN_FSIASPDIF_15, - - /* FMSI (PORT 12, 13, 14, 15, 16, 17, 18, 65) */ - GPIO_FN_FMSOCK, GPIO_FN_FMSOOLR, - GPIO_FN_FMSIOLR, GPIO_FN_FMSOOBT, - GPIO_FN_FMSIOBT, GPIO_FN_FMSOSLD, - GPIO_FN_FMSOILR, GPIO_FN_FMSIILR, - GPIO_FN_FMSOIBT, GPIO_FN_FMSIIBT, - GPIO_FN_FMSISLD, GPIO_FN_FMSICK, - - /* SCIFA0 (PORT 152, 153, 156, 157, 158) */ - GPIO_FN_SCIFA0_TXD, GPIO_FN_SCIFA0_RXD, - GPIO_FN_SCIFA0_SCK, GPIO_FN_SCIFA0_RTS, - GPIO_FN_SCIFA0_CTS, - - /* SCIFA1 (PORT 154, 155, 159, 160, 161) */ - GPIO_FN_SCIFA1_TXD, GPIO_FN_SCIFA1_RXD, - GPIO_FN_SCIFA1_SCK, GPIO_FN_SCIFA1_RTS, - GPIO_FN_SCIFA1_CTS, - - /* SCIFA2 (PORT 94, 95, 96, 97, 98) */ - GPIO_FN_SCIFA2_CTS1, GPIO_FN_SCIFA2_RTS1, - GPIO_FN_SCIFA2_TXD1, GPIO_FN_SCIFA2_RXD1, - GPIO_FN_SCIFA2_SCK1, - - /* SCIFA3 (PORT 43, 44, - 140, 141, 142, 143, 144) */ - GPIO_FN_SCIFA3_CTS_43, GPIO_FN_SCIFA3_CTS_140, - GPIO_FN_SCIFA3_RTS_44, GPIO_FN_SCIFA3_RTS_141, - GPIO_FN_SCIFA3_SCK, GPIO_FN_SCIFA3_TXD, - GPIO_FN_SCIFA3_RXD, - - /* SCIFA4 (PORT 5, 6) */ - GPIO_FN_SCIFA4_RXD, GPIO_FN_SCIFA4_TXD, - - /* SCIFA5 (PORT 8, 12) */ - GPIO_FN_SCIFA5_RXD, GPIO_FN_SCIFA5_TXD, - - /* SCIFB (PORT 162, 163, 164, 165, 166) */ - GPIO_FN_SCIFB_SCK, GPIO_FN_SCIFB_RTS, - GPIO_FN_SCIFB_CTS, GPIO_FN_SCIFB_TXD, - GPIO_FN_SCIFB_RXD, - - /* - * CEU (PORT 16, 17, - * 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, - * 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, - * 120) - */ - GPIO_FN_VIO_HD, GPIO_FN_VIO_CKO1, GPIO_FN_VIO_CKO2, - GPIO_FN_VIO_VD, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD, - GPIO_FN_VIO_CKO, - GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2, - GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5, - GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8, - GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11, - GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14, - GPIO_FN_VIO_D15, - - /* USB0 (PORT 113, 114, 115, 116, 117, 167) */ - GPIO_FN_IDIN_0, GPIO_FN_EXTLP_0, - GPIO_FN_OVCN2_0, GPIO_FN_PWEN_0, - GPIO_FN_OVCN_0, GPIO_FN_VBUS0_0, - - /* USB1 (PORT 18, 113, 114, 115, 116, 117, 138, 162, 168) */ - GPIO_FN_IDIN_1_18, GPIO_FN_IDIN_1_113, - GPIO_FN_PWEN_1_115, GPIO_FN_PWEN_1_138, - GPIO_FN_OVCN_1_114, GPIO_FN_OVCN_1_162, - GPIO_FN_EXTLP_1, GPIO_FN_OVCN2_1, - GPIO_FN_VBUS0_1, - - /* GPIO (PORT 41, 42, 43, 44) */ - GPIO_FN_GPI0, GPIO_FN_GPI1, GPIO_FN_GPO0, GPIO_FN_GPO1, - - /* - * BSC (PORT 19, - * 20, 21, 22, 25, 26, 27, 28, 29, - * 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, - * 40, 41, 42, 43, 44, 45, - * 62, 63, 64, 65, 66, 67, - * 71, 72, 74, 75) - */ - GPIO_FN_BS, GPIO_FN_WE1, - GPIO_FN_CKO, GPIO_FN_WAIT, GPIO_FN_RDWR, - - GPIO_FN_A0, GPIO_FN_A1, GPIO_FN_A2, GPIO_FN_A3, - GPIO_FN_A6, GPIO_FN_A7, GPIO_FN_A8, GPIO_FN_A9, - GPIO_FN_A10, GPIO_FN_A11, GPIO_FN_A12, GPIO_FN_A13, - GPIO_FN_A14, GPIO_FN_A15, GPIO_FN_A16, GPIO_FN_A17, - GPIO_FN_A18, GPIO_FN_A19, GPIO_FN_A20, GPIO_FN_A21, - GPIO_FN_A22, GPIO_FN_A23, GPIO_FN_A24, GPIO_FN_A25, - GPIO_FN_A26, - - GPIO_FN_CS0, GPIO_FN_CS2, GPIO_FN_CS4, - GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_CS6A, - - /* - * BSC/FLCTL (PORT 23, 24, - * 46, 47, 48, 49, - * 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, - * 60, 61, 69, 70) - */ - GPIO_FN_RD_FSC, GPIO_FN_WE0_FWE, - GPIO_FN_A4_FOE, GPIO_FN_A5_FCDE, - GPIO_FN_D0_NAF0, GPIO_FN_D1_NAF1, GPIO_FN_D2_NAF2, - GPIO_FN_D3_NAF3, GPIO_FN_D4_NAF4, GPIO_FN_D5_NAF5, - GPIO_FN_D6_NAF6, GPIO_FN_D7_NAF7, GPIO_FN_D8_NAF8, - GPIO_FN_D9_NAF9, GPIO_FN_D10_NAF10, GPIO_FN_D11_NAF11, - GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, GPIO_FN_D14_NAF14, - GPIO_FN_D15_NAF15, - - /* SPU2 (PORT 65) */ - GPIO_FN_VINT_I, - - /* FLCTL (PORT 66, 68, 73) */ - GPIO_FN_FCE1, GPIO_FN_FCE0, GPIO_FN_FRB, - - /* HSI (PORT 76, 77, 78, 79, 80, 81, 82, 83) */ - GPIO_FN_GP_RX_FLAG, GPIO_FN_GP_RX_DATA, GPIO_FN_GP_TX_READY, - GPIO_FN_GP_RX_WAKE, GPIO_FN_MP_TX_FLAG, GPIO_FN_MP_TX_DATA, - GPIO_FN_MP_RX_READY, GPIO_FN_MP_TX_WAKE, - - /* - * MFI (PORT 76, 77, 78, 79, - * 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, - * 90, 91, 92, 93, 94, 95, 96, 97, 98, 99) - */ - GPIO_FN_MFIv6, /* see MSEL4CR 6 */ - GPIO_FN_MFIv4, /* see MSEL4CR 6 */ - - GPIO_FN_MEMC_CS0, GPIO_FN_MEMC_BUSCLK_MEMC_A0, - GPIO_FN_MEMC_CS1_MEMC_A1, GPIO_FN_MEMC_ADV_MEMC_DREQ0, - GPIO_FN_MEMC_WAIT_MEMC_DREQ1, GPIO_FN_MEMC_NOE, - GPIO_FN_MEMC_NWE, GPIO_FN_MEMC_INT, - - GPIO_FN_MEMC_AD0, GPIO_FN_MEMC_AD1, GPIO_FN_MEMC_AD2, - GPIO_FN_MEMC_AD3, GPIO_FN_MEMC_AD4, GPIO_FN_MEMC_AD5, - GPIO_FN_MEMC_AD6, GPIO_FN_MEMC_AD7, GPIO_FN_MEMC_AD8, - GPIO_FN_MEMC_AD9, GPIO_FN_MEMC_AD10, GPIO_FN_MEMC_AD11, - GPIO_FN_MEMC_AD12, GPIO_FN_MEMC_AD13, GPIO_FN_MEMC_AD14, - GPIO_FN_MEMC_AD15, - - /* SIM (PORT 94, 95, 98) */ - GPIO_FN_SIM_RST, GPIO_FN_SIM_CLK, GPIO_FN_SIM_D, - - /* TPU (PORT 93, 99, 112, 160, 161) */ - GPIO_FN_TPU0TO0, GPIO_FN_TPU0TO1, - GPIO_FN_TPU0TO2_93, GPIO_FN_TPU0TO2_99, - GPIO_FN_TPU0TO3, - - /* I2C2 (PORT 110, 111) */ - GPIO_FN_I2C_SCL2, GPIO_FN_I2C_SDA2, - - /* I2C3(1) (PORT 114, 115) */ - GPIO_FN_I2C_SCL3, GPIO_FN_I2C_SDA3, - - /* I2C3(2) (PORT 137, 145) */ - GPIO_FN_I2C_SCL3S, GPIO_FN_I2C_SDA3S, - - /* I2C4(2) (PORT 116, 117) */ - GPIO_FN_I2C_SCL4, GPIO_FN_I2C_SDA4, - - /* I2C4(2) (PORT 146, 147) */ - GPIO_FN_I2C_SCL4S, GPIO_FN_I2C_SDA4S, - - /* - * KEYSC (PORT 121, 122, 123, 124, 125, 126, 127, 128, 129, - * 130, 131, 132, 133, 134, 135, 136) - */ - GPIO_FN_KEYOUT0, GPIO_FN_KEYIN0_121, GPIO_FN_KEYIN0_136, - GPIO_FN_KEYOUT1, GPIO_FN_KEYIN1_122, GPIO_FN_KEYIN1_135, - GPIO_FN_KEYOUT2, GPIO_FN_KEYIN2_123, GPIO_FN_KEYIN2_134, - GPIO_FN_KEYOUT3, GPIO_FN_KEYIN3_124, GPIO_FN_KEYIN3_133, - GPIO_FN_KEYOUT4, GPIO_FN_KEYIN4, - GPIO_FN_KEYOUT5, GPIO_FN_KEYIN5, - GPIO_FN_KEYOUT6, GPIO_FN_KEYIN6, - GPIO_FN_KEYOUT7, GPIO_FN_KEYIN7, - - /* - * LCDC (PORT 121, 122, 123, 124, 125, 126, 127, 128, 129, - * 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, - * 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, - * 150, 151) - */ - GPIO_FN_LCDC0_SELECT, /* LCDC 0 */ - GPIO_FN_LCDC1_SELECT, /* LCDC 1 */ - GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDVSYN, - GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_LCDRD, - GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_LCDLCLK, - GPIO_FN_LCDDON, - - GPIO_FN_LCDD0, GPIO_FN_LCDD1, GPIO_FN_LCDD2, GPIO_FN_LCDD3, - GPIO_FN_LCDD4, GPIO_FN_LCDD5, GPIO_FN_LCDD6, GPIO_FN_LCDD7, - GPIO_FN_LCDD8, GPIO_FN_LCDD9, GPIO_FN_LCDD10, GPIO_FN_LCDD11, - GPIO_FN_LCDD12, GPIO_FN_LCDD13, GPIO_FN_LCDD14, GPIO_FN_LCDD15, - GPIO_FN_LCDD16, GPIO_FN_LCDD17, GPIO_FN_LCDD18, GPIO_FN_LCDD19, - GPIO_FN_LCDD20, GPIO_FN_LCDD21, GPIO_FN_LCDD22, GPIO_FN_LCDD23, - - /* IRDA (PORT 139, 140, 141, 142) */ - GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL, - GPIO_FN_IROUT_139, GPIO_FN_IROUT_140, - - /* TSIF1 (PORT 156, 157, 158, 159) */ - GPIO_FN_TS0_1SELECT, /* TSIF0 - 1 select */ - GPIO_FN_TS0_2SELECT, /* TSIF0 - 2 select */ - GPIO_FN_TS1_1SELECT, /* TSIF1 - 1 select */ - GPIO_FN_TS1_2SELECT, /* TSIF1 - 2 select */ - - GPIO_FN_TS_SPSYNC1, GPIO_FN_TS_SDAT1, - GPIO_FN_TS_SDEN1, GPIO_FN_TS_SCK1, - - /* TSIF2 (PORT 137, 145, 146, 147) */ - GPIO_FN_TS_SPSYNC2, GPIO_FN_TS_SDAT2, - GPIO_FN_TS_SDEN2, GPIO_FN_TS_SCK2, - - /* HDMI (PORT 169, 170) */ - GPIO_FN_HDMI_HPD, GPIO_FN_HDMI_CEC, - - /* SDENC see MSEL4CR 19 */ - GPIO_FN_SDENC_CPG, - GPIO_FN_SDENC_DV_CLKI, -}; - /* DMA slave IDs */ enum { SHDMA_SLAVE_INVALID, @@ -466,6 +75,8 @@ extern void sh7372_intcs_resume(void); extern void sh7372_intca_suspend(void); extern void sh7372_intca_resume(void); +extern unsigned long sh7372_cpu_resume; + #ifdef CONFIG_PM extern void __init sh7372_init_pm_domains(void); #else diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h index 9320aff0a20..f2d8744c1f1 100644 --- a/arch/arm/mach-shmobile/include/mach/zboot.h +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -10,11 +10,9 @@ * **************************************************/ -#ifdef CONFIG_MACH_AP4EVB -#define MACH_TYPE MACH_TYPE_AP4EVB -#include "mach/head-ap4evb.txt" -#elif defined(CONFIG_MACH_MACKEREL) +#ifdef CONFIG_MACH_MACKEREL #define MACH_TYPE MACH_TYPE_MACKEREL +#define MEMORY_START 0x40000000 #include "mach/head-mackerel.txt" #else #error "unsupported board." diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index dec9293bb90..0de75fd394b 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -351,6 +351,9 @@ static void sh7372_enter_a4s_common(int pllc0_on) static void sh7372_pm_setup_smfram(void) { + /* pass physical address of cpu_resume() to assembly resume code */ + sh7372_cpu_resume = virt_to_phys(cpu_resume); + memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100); } #else diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 326a4ab0bd5..3a6b6fe7b6c 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -70,29 +70,15 @@ void __init r8a7740_map_io(void) } /* PFC */ -static struct resource r8a7740_pfc_resources[] = { - [0] = { - .start = 0xe6050000, - .end = 0xe6057fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xe605800c, - .end = 0xe605802b, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device r8a7740_pfc_device = { - .name = "pfc-r8a7740", - .id = -1, - .resource = r8a7740_pfc_resources, - .num_resources = ARRAY_SIZE(r8a7740_pfc_resources), +static const struct resource pfc_resources[] = { + DEFINE_RES_MEM(0xe6050000, 0x8000), + DEFINE_RES_MEM(0xe605800c, 0x0020), }; void __init r8a7740_pinmux_init(void) { - platform_device_register(&r8a7740_pfc_device); + platform_device_register_simple("pfc-r8a7740", -1, pfc_resources, + ARRAY_SIZE(pfc_resources)); } static struct renesas_intc_irqpin_config irqpin0_platform_data = { diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 30b4a336308..80c20392ad7 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -24,11 +24,18 @@ #include <linux/irqchip/arm-gic.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <linux/platform_device.h> #include <linux/irqchip.h> #include <linux/serial_sci.h> #include <linux/sh_timer.h> +#include <linux/pm_runtime.h> +#include <linux/usb/phy.h> +#include <linux/usb/hcd.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> +#include <linux/dma-mapping.h> #include <mach/irqs.h> #include <mach/r8a7778.h> #include <mach/common.h> @@ -80,12 +87,6 @@ static struct sh_timer_config sh_tmu1_platform_data = { .clocksource_rating = 200, }; -/* Ether */ -static struct resource ether_resources[] = { - DEFINE_RES_MEM(0xfde00000, 0x400), - DEFINE_RES_IRQ(gic_iid(0x89)), -}; - #define r8a7778_register_tmu(idx) \ platform_device_register_resndata( \ &platform_bus, "sh_tmu", idx, \ @@ -94,6 +95,244 @@ static struct resource ether_resources[] = { &sh_tmu##idx##_platform_data, \ sizeof(sh_tmu##idx##_platform_data)) +/* USB PHY */ +static struct resource usb_phy_resources[] __initdata = { + DEFINE_RES_MEM(0xffe70800, 0x100), + DEFINE_RES_MEM(0xffe76000, 0x100), +}; + +void __init r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata) +{ + platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1, + usb_phy_resources, + ARRAY_SIZE(usb_phy_resources), + pdata, sizeof(*pdata)); +} + +/* USB */ +static struct usb_phy *phy; + +static int usb_power_on(struct platform_device *pdev) +{ + if (IS_ERR(phy)) + return PTR_ERR(phy); + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + usb_phy_init(phy); + + return 0; +} + +static void usb_power_off(struct platform_device *pdev) +{ + if (IS_ERR(phy)) + return; + + usb_phy_shutdown(phy); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); +} + +static int ehci_init_internal_buffer(struct usb_hcd *hcd) +{ + /* + * Below are recommended values from the datasheet; + * see [USB :: Setting of EHCI Internal Buffer]. + */ + /* EHCI IP internal buffer setting */ + iowrite32(0x00ff0040, hcd->regs + 0x0094); + /* EHCI IP internal buffer enable */ + iowrite32(0x00000001, hcd->regs + 0x009C); + + return 0; +} + +static struct usb_ehci_pdata ehci_pdata __initdata = { + .power_on = usb_power_on, + .power_off = usb_power_off, + .power_suspend = usb_power_off, + .pre_setup = ehci_init_internal_buffer, +}; + +static struct resource ehci_resources[] __initdata = { + DEFINE_RES_MEM(0xffe70000, 0x400), + DEFINE_RES_IRQ(gic_iid(0x4c)), +}; + +static struct usb_ohci_pdata ohci_pdata __initdata = { + .power_on = usb_power_on, + .power_off = usb_power_off, + .power_suspend = usb_power_off, +}; + +static struct resource ohci_resources[] __initdata = { + DEFINE_RES_MEM(0xffe70400, 0x400), + DEFINE_RES_IRQ(gic_iid(0x4c)), +}; + +#define USB_PLATFORM_INFO(hci) \ +static struct platform_device_info hci##_info __initdata = { \ + .parent = &platform_bus, \ + .name = #hci "-platform", \ + .id = -1, \ + .res = hci##_resources, \ + .num_res = ARRAY_SIZE(hci##_resources), \ + .data = &hci##_pdata, \ + .size_data = sizeof(hci##_pdata), \ + .dma_mask = DMA_BIT_MASK(32), \ +} + +USB_PLATFORM_INFO(ehci); +USB_PLATFORM_INFO(ohci); + +/* Ether */ +static struct resource ether_resources[] = { + DEFINE_RES_MEM(0xfde00000, 0x400), + DEFINE_RES_IRQ(gic_iid(0x89)), +}; + +void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata) +{ + platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1, + ether_resources, + ARRAY_SIZE(ether_resources), + pdata, sizeof(*pdata)); +} + +/* PFC/GPIO */ +static struct resource pfc_resources[] = { + DEFINE_RES_MEM(0xfffc0000, 0x118), +}; + +#define R8A7778_GPIO(idx) \ +static struct resource r8a7778_gpio##idx##_resources[] = { \ + DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \ + DEFINE_RES_IRQ(gic_iid(0x87)), \ +}; \ + \ +static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = { \ + .gpio_base = 32 * (idx), \ + .irq_base = GPIO_IRQ_BASE(idx), \ + .number_of_pins = 32, \ + .pctl_name = "pfc-r8a7778", \ +} + +R8A7778_GPIO(0); +R8A7778_GPIO(1); +R8A7778_GPIO(2); +R8A7778_GPIO(3); +R8A7778_GPIO(4); + +#define r8a7778_register_gpio(idx) \ + platform_device_register_resndata( \ + &platform_bus, "gpio_rcar", idx, \ + r8a7778_gpio##idx##_resources, \ + ARRAY_SIZE(r8a7778_gpio##idx##_resources), \ + &r8a7778_gpio##idx##_platform_data, \ + sizeof(r8a7778_gpio##idx##_platform_data)) + +void __init r8a7778_pinmux_init(void) +{ + platform_device_register_simple( + "pfc-r8a7778", -1, + pfc_resources, + ARRAY_SIZE(pfc_resources)); + + r8a7778_register_gpio(0); + r8a7778_register_gpio(1); + r8a7778_register_gpio(2); + r8a7778_register_gpio(3); + r8a7778_register_gpio(4); +}; + +/* SDHI */ +static struct resource sdhi_resources[] = { + /* SDHI0 */ + DEFINE_RES_MEM(0xFFE4C000, 0x100), + DEFINE_RES_IRQ(gic_iid(0x77)), + /* SDHI1 */ + DEFINE_RES_MEM(0xFFE4D000, 0x100), + DEFINE_RES_IRQ(gic_iid(0x78)), + /* SDHI2 */ + DEFINE_RES_MEM(0xFFE4F000, 0x100), + DEFINE_RES_IRQ(gic_iid(0x76)), +}; + +void __init r8a7778_sdhi_init(int id, + struct sh_mobile_sdhi_info *info) +{ + BUG_ON(id < 0 || id > 2); + + platform_device_register_resndata( + &platform_bus, "sh_mobile_sdhi", id, + sdhi_resources + (2 * id), 2, + info, sizeof(*info)); +} + +/* I2C */ +static struct resource i2c_resources[] __initdata = { + /* I2C0 */ + DEFINE_RES_MEM(0xffc70000, 0x1000), + DEFINE_RES_IRQ(gic_iid(0x63)), + /* I2C1 */ + DEFINE_RES_MEM(0xffc71000, 0x1000), + DEFINE_RES_IRQ(gic_iid(0x6e)), + /* I2C2 */ + DEFINE_RES_MEM(0xffc72000, 0x1000), + DEFINE_RES_IRQ(gic_iid(0x6c)), + /* I2C3 */ + DEFINE_RES_MEM(0xffc73000, 0x1000), + DEFINE_RES_IRQ(gic_iid(0x6d)), +}; + +void __init r8a7778_add_i2c_device(int id) +{ + BUG_ON(id < 0 || id > 3); + + platform_device_register_simple( + "i2c-rcar", id, + i2c_resources + (2 * id), 2); +} + +/* HSPI */ +static struct resource hspi_resources[] __initdata = { + /* HSPI0 */ + DEFINE_RES_MEM(0xfffc7000, 0x18), + DEFINE_RES_IRQ(gic_iid(0x5f)), + /* HSPI1 */ + DEFINE_RES_MEM(0xfffc8000, 0x18), + DEFINE_RES_IRQ(gic_iid(0x74)), + /* HSPI2 */ + DEFINE_RES_MEM(0xfffc6000, 0x18), + DEFINE_RES_IRQ(gic_iid(0x75)), +}; + +void __init r8a7778_add_hspi_device(int id) +{ + BUG_ON(id < 0 || id > 2); + + platform_device_register_simple( + "sh-hspi", id, + hspi_resources + (2 * id), 2); +} + +/* MMC */ +static struct resource mmc_resources[] __initdata = { + DEFINE_RES_MEM(0xffe4e000, 0x100), + DEFINE_RES_IRQ(gic_iid(0x5d)), +}; + +void __init r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info) +{ + platform_device_register_resndata( + &platform_bus, "sh_mmcif", -1, + mmc_resources, ARRAY_SIZE(mmc_resources), + info, sizeof(*info)); +} + void __init r8a7778_add_standard_devices(void) { int i; @@ -118,12 +357,12 @@ void __init r8a7778_add_standard_devices(void) r8a7778_register_tmu(1); } -void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata) +void __init r8a7778_init_late(void) { - platform_device_register_resndata(&platform_bus, "sh_eth", -1, - ether_resources, - ARRAY_SIZE(ether_resources), - pdata, sizeof(*pdata)); + phy = usb_get_phy(USB_PHY_TYPE_USB2); + + platform_device_register_full(&ehci_info); + platform_device_register_full(&ohci_info); } static struct renesas_intc_irqpin_config irqpin_platform_data = { @@ -239,6 +478,7 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_machine = r8a7778_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a7778_compat_dt, + .init_late = r8a7778_init_late, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index b0b394842ea..398687761f5 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -32,6 +32,11 @@ #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <linux/dma-mapping.h> +#include <linux/usb/otg.h> +#include <linux/usb/hcd.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> +#include <linux/pm_runtime.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/r8a7779.h> @@ -65,11 +70,7 @@ void __init r8a7779_map_io(void) } static struct resource r8a7779_pfc_resources[] = { - [0] = { - .start = 0xfffc0000, - .end = 0xfffc023b, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(0xfffc0000, 0x023c), }; static struct platform_device r8a7779_pfc_device = { @@ -81,15 +82,8 @@ static struct platform_device r8a7779_pfc_device = { #define R8A7779_GPIO(idx, npins) \ static struct resource r8a7779_gpio##idx##_resources[] = { \ - [0] = { \ - .start = 0xffc40000 + 0x1000 * (idx), \ - .end = 0xffc4002b + 0x1000 * (idx), \ - .flags = IORESOURCE_MEM, \ - }, \ - [1] = { \ - .start = gic_iid(0xad + (idx)), \ - .flags = IORESOURCE_IRQ, \ - } \ + DEFINE_RES_MEM(0xffc40000 + (0x1000 * (idx)), 0x002c), \ + DEFINE_RES_IRQ(gic_iid(0xad + (idx))), \ }; \ \ static struct gpio_rcar_config r8a7779_gpio##idx##_platform_data = { \ @@ -394,6 +388,165 @@ static struct platform_device sata_device = { }, }; +/* USB PHY */ +static struct resource usb_phy_resources[] __initdata = { + [0] = { + .start = 0xffe70800, + .end = 0xffe70900 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +/* USB */ +static struct usb_phy *phy; + +static int usb_power_on(struct platform_device *pdev) +{ + if (IS_ERR(phy)) + return PTR_ERR(phy); + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + usb_phy_init(phy); + + return 0; +} + +static void usb_power_off(struct platform_device *pdev) +{ + if (IS_ERR(phy)) + return; + + usb_phy_shutdown(phy); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); +} + +static int ehci_init_internal_buffer(struct usb_hcd *hcd) +{ + /* + * Below are recommended values from the datasheet; + * see [USB :: Setting of EHCI Internal Buffer]. + */ + /* EHCI IP internal buffer setting */ + iowrite32(0x00ff0040, hcd->regs + 0x0094); + /* EHCI IP internal buffer enable */ + iowrite32(0x00000001, hcd->regs + 0x009C); + + return 0; +} + +static struct usb_ehci_pdata ehcix_pdata = { + .power_on = usb_power_on, + .power_off = usb_power_off, + .power_suspend = usb_power_off, + .pre_setup = ehci_init_internal_buffer, +}; + +static struct resource ehci0_resources[] = { + [0] = { + .start = 0xffe70000, + .end = 0xffe70400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_iid(0x4c), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ehci0_device = { + .name = "ehci-platform", + .id = 0, + .dev = { + .dma_mask = &ehci0_device.dev.coherent_dma_mask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &ehcix_pdata, + }, + .num_resources = ARRAY_SIZE(ehci0_resources), + .resource = ehci0_resources, +}; + +static struct resource ehci1_resources[] = { + [0] = { + .start = 0xfff70000, + .end = 0xfff70400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_iid(0x4d), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ehci1_device = { + .name = "ehci-platform", + .id = 1, + .dev = { + .dma_mask = &ehci1_device.dev.coherent_dma_mask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &ehcix_pdata, + }, + .num_resources = ARRAY_SIZE(ehci1_resources), + .resource = ehci1_resources, +}; + +static struct usb_ohci_pdata ohcix_pdata = { + .power_on = usb_power_on, + .power_off = usb_power_off, + .power_suspend = usb_power_off, +}; + +static struct resource ohci0_resources[] = { + [0] = { + .start = 0xffe70400, + .end = 0xffe70800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_iid(0x4c), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ohci0_device = { + .name = "ohci-platform", + .id = 0, + .dev = { + .dma_mask = &ohci0_device.dev.coherent_dma_mask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &ohcix_pdata, + }, + .num_resources = ARRAY_SIZE(ohci0_resources), + .resource = ohci0_resources, +}; + +static struct resource ohci1_resources[] = { + [0] = { + .start = 0xfff70400, + .end = 0xfff70800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_iid(0x4d), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ohci1_device = { + .name = "ohci-platform", + .id = 1, + .dev = { + .dma_mask = &ohci1_device.dev.coherent_dma_mask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &ohcix_pdata, + }, + .num_resources = ARRAY_SIZE(ohci1_resources), + .resource = ohci1_resources, +}; + /* Ether */ static struct resource ether_resources[] = { { @@ -417,7 +570,7 @@ static struct platform_device *r8a7779_devices_dt[] __initdata = { &tmu01_device, }; -static struct platform_device *r8a7779_late_devices[] __initdata = { +static struct platform_device *r8a7779_standard_devices[] __initdata = { &i2c0_device, &i2c1_device, &i2c2_device, @@ -437,18 +590,26 @@ void __init r8a7779_add_standard_devices(void) platform_add_devices(r8a7779_devices_dt, ARRAY_SIZE(r8a7779_devices_dt)); - platform_add_devices(r8a7779_late_devices, - ARRAY_SIZE(r8a7779_late_devices)); + platform_add_devices(r8a7779_standard_devices, + ARRAY_SIZE(r8a7779_standard_devices)); } void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata) { - platform_device_register_resndata(&platform_bus, "sh_eth", -1, + platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1, ether_resources, ARRAY_SIZE(ether_resources), pdata, sizeof(*pdata)); } +void __init r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata) +{ + platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1, + usb_phy_resources, + ARRAY_SIZE(usb_phy_resources), + pdata, sizeof(*pdata)); +} + /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ void __init __weak r8a7779_register_twd(void) { } @@ -481,6 +642,23 @@ void __init r8a7779_add_early_devices(void) */ } +static struct platform_device *r8a7779_late_devices[] __initdata = { + &ehci0_device, + &ehci1_device, + &ohci0_device, + &ohci1_device, +}; + +void __init r8a7779_init_late(void) +{ + /* get USB PHY */ + phy = usb_get_phy(USB_PHY_TYPE_USB2); + + shmobile_init_late(); + platform_add_devices(r8a7779_late_devices, + ARRAY_SIZE(r8a7779_late_devices)); +} + #ifdef CONFIG_USE_OF void __init r8a7779_init_delay(void) { @@ -514,6 +692,7 @@ DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)") .init_irq = r8a7779_init_irq_dt, .init_machine = r8a7779_add_standard_devices_dt, .init_time = shmobile_timer_init, + .init_late = r8a7779_init_late, .dt_compat = r8a7779_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index 49de2d56f86..b461d93431e 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/serial_sci.h> +#include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/irq-renesas-irqc.h> #include <mach/common.h> #include <mach/irqs.h> @@ -31,13 +32,46 @@ static const struct resource pfc_resources[] = { DEFINE_RES_MEM(0xe6060000, 0x250), - DEFINE_RES_MEM(0xe6050000, 0x5050), }; +#define R8A7790_GPIO(idx) \ +static struct resource r8a7790_gpio##idx##_resources[] = { \ + DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \ + DEFINE_RES_IRQ(gic_spi(4 + (idx))), \ +}; \ + \ +static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data = { \ + .gpio_base = 32 * (idx), \ + .irq_base = 0, \ + .number_of_pins = 32, \ + .pctl_name = "pfc-r8a7790", \ + .has_both_edge_trigger = 1, \ +}; \ + +R8A7790_GPIO(0); +R8A7790_GPIO(1); +R8A7790_GPIO(2); +R8A7790_GPIO(3); +R8A7790_GPIO(4); +R8A7790_GPIO(5); + +#define r8a7790_register_gpio(idx) \ + platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \ + r8a7790_gpio##idx##_resources, \ + ARRAY_SIZE(r8a7790_gpio##idx##_resources), \ + &r8a7790_gpio##idx##_platform_data, \ + sizeof(r8a7790_gpio##idx##_platform_data)) + void __init r8a7790_pinmux_init(void) { platform_device_register_simple("pfc-r8a7790", -1, pfc_resources, ARRAY_SIZE(pfc_resources)); + r8a7790_register_gpio(0); + r8a7790_register_gpio(1); + r8a7790_register_gpio(2); + r8a7790_register_gpio(3); + r8a7790_register_gpio(4); + r8a7790_register_gpio(5); } #define SCIF_COMMON(scif_type, baseaddr, irq) \ diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 9696f364686..96e7ca1e4e1 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -288,12 +288,7 @@ static struct sh_timer_config tmu00_platform_data = { }; static struct resource tmu00_resources[] = { - [0] = { - .name = "TMU00", - .start = 0xfff60008, - .end = 0xfff60013, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM_NAMED(0xfff60008, 0xc, "TMU00"), [1] = { .start = intcs_evt2irq(0x0e80), /* TMU0_TUNI00 */ .flags = IORESOURCE_IRQ, @@ -318,12 +313,7 @@ static struct sh_timer_config tmu01_platform_data = { }; static struct resource tmu01_resources[] = { - [0] = { - .name = "TMU01", - .start = 0xfff60014, - .end = 0xfff6001f, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM_NAMED(0xfff60014, 0xc, "TMU00"), [1] = { .start = intcs_evt2irq(0x0ea0), /* TMU0_TUNI01 */ .flags = IORESOURCE_IRQ, @@ -341,12 +331,7 @@ static struct platform_device tmu01_device = { }; static struct resource i2c0_resources[] = { - [0] = { - .name = "IIC0", - .start = 0xe6820000, - .end = 0xe6820425 - 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM_NAMED(0xe6820000, 0x426, "IIC0"), [1] = { .start = gic_spi(167), .end = gic_spi(170), @@ -355,12 +340,7 @@ static struct resource i2c0_resources[] = { }; static struct resource i2c1_resources[] = { - [0] = { - .name = "IIC1", - .start = 0xe6822000, - .end = 0xe6822425 - 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM_NAMED(0xe6822000, 0x426, "IIC1"), [1] = { .start = gic_spi(51), .end = gic_spi(54), @@ -369,12 +349,7 @@ static struct resource i2c1_resources[] = { }; static struct resource i2c2_resources[] = { - [0] = { - .name = "IIC2", - .start = 0xe6824000, - .end = 0xe6824425 - 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM_NAMED(0xe6824000, 0x426, "IIC2"), [1] = { .start = gic_spi(171), .end = gic_spi(174), @@ -383,12 +358,7 @@ static struct resource i2c2_resources[] = { }; static struct resource i2c3_resources[] = { - [0] = { - .name = "IIC3", - .start = 0xe6826000, - .end = 0xe6826425 - 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM_NAMED(0xe6826000, 0x426, "IIC3"), [1] = { .start = gic_spi(183), .end = gic_spi(186), @@ -397,12 +367,7 @@ static struct resource i2c3_resources[] = { }; static struct resource i2c4_resources[] = { - [0] = { - .name = "IIC4", - .start = 0xe6828000, - .end = 0xe6828425 - 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM_NAMED(0xe6828000, 0x426, "IIC4"), [1] = { .start = gic_spi(187), .end = gic_spi(190), @@ -623,12 +588,7 @@ static struct sh_dmae_pdata sh73a0_dmae_platform_data = { }; static struct resource sh73a0_dmae_resources[] = { - { - /* Registers including DMAOR and channels including DMARSx */ - .start = 0xfe000020, - .end = 0xfe008a00 - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(0xfe000020, 0x89e0), { .name = "error_irq", .start = gic_spi(129), @@ -727,18 +687,10 @@ static struct sh_dmae_pdata sh73a0_mpdma_platform_data = { /* Resource order important! */ static struct resource sh73a0_mpdma_resources[] = { - { - /* Channel registers and DMAOR */ - .start = 0xec618020, - .end = 0xec61828f, - .flags = IORESOURCE_MEM, - }, - { - /* DMARSx */ - .start = 0xec619000, - .end = 0xec61900b, - .flags = IORESOURCE_MEM, - }, + /* Channel registers and DMAOR */ + DEFINE_RES_MEM(0xec618020, 0x270), + /* DMARSx */ + DEFINE_RES_MEM(0xec619000, 0xc), { .name = "error_irq", .start = gic_spi(181), @@ -785,12 +737,7 @@ static struct platform_device pmu_device = { /* an IPMMU module for ICB */ static struct resource ipmmu_resources[] = { - [0] = { - .name = "IPMMU", - .start = 0xfe951000, - .end = 0xfe9510ff, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM_NAMED(0xfe951000, 0x100, "IPMMU"), }; static const char * const ipmmu_dev_names[] = { @@ -982,11 +929,17 @@ void __init sh73a0_add_standard_devices(void) ARRAY_SIZE(sh73a0_late_devices)); } +void __init sh73a0_init_delay(void) +{ + shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */ +} + /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ void __init __weak sh73a0_register_twd(void) { } void __init sh73a0_earlytimer_init(void) { + sh73a0_init_delay(); sh73a0_clock_init(); shmobile_earlytimer_init(); sh73a0_register_twd(); @@ -1005,17 +958,14 @@ void __init sh73a0_add_early_devices(void) #ifdef CONFIG_USE_OF -void __init sh73a0_init_delay(void) -{ - shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */ -} - static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = { {}, }; void __init sh73a0_add_standard_devices_dt(void) { + struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; + /* clocks are setup late during boot in the case of DT */ sh73a0_clock_init(); @@ -1023,6 +973,9 @@ void __init sh73a0_add_standard_devices_dt(void) ARRAY_SIZE(sh73a0_devices_dt)); of_platform_populate(NULL, of_default_bus_match_table, sh73a0_auxdata_lookup, NULL); + + /* Instantiate cpufreq-cpu0 */ + platform_device_register_full(&devinfo); } static const char *sh73a0_boards_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S index a9df53b69ab..53f4840e494 100644 --- a/arch/arm/mach-shmobile/sleep-sh7372.S +++ b/arch/arm/mach-shmobile/sleep-sh7372.S @@ -40,7 +40,10 @@ .global sh7372_resume_core_standby_sysc sh7372_resume_core_standby_sysc: ldr pc, 1f -1: .long cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET + + .globl sh7372_cpu_resume +sh7372_cpu_resume: +1: .space 4 #define SPDCR 0xe6180008 diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index e38691b4d0d..80991b35f4a 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -40,8 +40,10 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) { scu_enable(shmobile_scu_base); - /* Tell ROM loader about our vector (in headsmp-scu.S) */ - emev2_set_boot_vector(__pa(shmobile_secondary_vector_scu)); + /* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */ + emev2_set_boot_vector(__pa(shmobile_boot_vector)); + shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); + shmobile_boot_arg = (unsigned long)shmobile_scu_base; /* enable cache coherency on booting CPU */ scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index a853bf182ed..526cfaae81c 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -101,8 +101,10 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { scu_enable(shmobile_scu_base); - /* Map the reset vector (in headsmp-scu.S) */ - __raw_writel(__pa(shmobile_secondary_vector_scu), AVECR); + /* Map the reset vector (in headsmp-scu.S, headsmp.S) */ + __raw_writel(__pa(shmobile_boot_vector), AVECR); + shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); + shmobile_boot_arg = (unsigned long)shmobile_scu_base; /* enable cache coherency on booting CPU */ scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 496592b6c76..d613113a04b 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -64,9 +64,11 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) { scu_enable(shmobile_scu_base); - /* Map the reset vector (in headsmp-scu.S) */ + /* Map the reset vector (in headsmp-scu.S, headsmp.S) */ __raw_writel(0, APARMBAREA); /* 4k */ - __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR); + __raw_writel(__pa(shmobile_boot_vector), SBAR); + shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); + shmobile_boot_arg = (unsigned long)shmobile_scu_base; /* enable cache coherency on booting CPU */ scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 566e804d403..dd86db46752 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -7,11 +7,11 @@ config ARCH_SOCFPGA select CLKDEV_LOOKUP select COMMON_CLK select CPU_V7 - select DW_APB_TIMER select DW_APB_TIMER_OF select GENERIC_CLOCKEVENTS select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU select HAVE_SMP + select MFD_SYSCON select SPARSE_IRQ select USE_OF diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 46a051359f0..8ea11b472b9 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -14,7 +14,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <linux/dw_apb_timer.h> #include <linux/clk-provider.h> #include <linux/irqchip.h> #include <linux/of_address.h> @@ -120,7 +119,6 @@ DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA") .smp = smp_ops(socfpga_smp_ops), .map_io = socfpga_map_io, .init_irq = socfpga_init_irq, - .init_time = dw_apb_timer_init, .init_machine = socfpga_cyclone5_init, .restart = socfpga_cyclone5_restart, .dt_compat = altera_dt_match, diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index a3a755fa285..84485a10fc3 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -93,6 +93,7 @@ static void __init sunxi_dt_init(void) static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", + "allwinner,sun5i-a10s", "allwinner,sun5i-a13", NULL, }; diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index d011f0ad49c..98b184efc11 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o +obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o endif diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 9f852c6fe5b..ec5836b1e71 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -29,6 +29,7 @@ #include "board.h" #include "common.h" +#include "cpuidle.h" #include "fuse.h" #include "iomap.h" #include "irq.h" @@ -108,5 +109,6 @@ void __init tegra_init_early(void) void __init tegra_init_late(void) { tegra_init_suspend(); + tegra_cpuidle_init(); tegra_powergate_debugfs_init(); } diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h index 5900cc44f78..32f8eb3fe34 100644 --- a/arch/arm/mach-tegra/common.h +++ b/arch/arm/mach-tegra/common.h @@ -2,3 +2,4 @@ extern struct smp_operations tegra_smp_ops; extern int tegra_cpu_kill(unsigned int cpu); extern void tegra_cpu_die(unsigned int cpu); +extern int tegra_cpu_disable(unsigned int cpu); diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 0cdba8de8c7..706aa4215c3 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -177,7 +177,6 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu; bool entered_lp2 = false; if (tegra_pending_sgi()) @@ -193,16 +192,16 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, local_fiq_disable(); - tegra_set_cpu_in_lp2(cpu); + tegra_set_cpu_in_lp2(); cpu_pm_enter(); - if (cpu == 0) + if (dev->cpu == 0) entered_lp2 = tegra20_cpu_cluster_power_down(dev, drv, index); else entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index); cpu_pm_exit(); - tegra_clear_cpu_in_lp2(cpu); + tegra_clear_cpu_in_lp2(); local_fiq_enable(); @@ -214,8 +213,5 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, int __init tegra20_cpuidle_init(void) { -#ifdef CONFIG_PM_SLEEP - tegra_tear_down_cpu = tegra20_tear_down_cpu; -#endif return cpuidle_register(&tegra_idle_driver, cpu_possible_mask); } diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index 3cf9aca5f3e..ed2a2a7bae4 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -114,16 +114,15 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu; bool entered_lp2 = false; bool last_cpu; local_fiq_disable(); - last_cpu = tegra_set_cpu_in_lp2(cpu); + last_cpu = tegra_set_cpu_in_lp2(); cpu_pm_enter(); - if (cpu == 0) { + if (dev->cpu == 0) { if (last_cpu) entered_lp2 = tegra30_cpu_cluster_power_down(dev, drv, index); @@ -134,7 +133,7 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev, } cpu_pm_exit(); - tegra_clear_cpu_in_lp2(cpu); + tegra_clear_cpu_in_lp2(); local_fiq_enable(); @@ -146,8 +145,5 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev, int __init tegra30_cpuidle_init(void) { -#ifdef CONFIG_PM_SLEEP - tegra_tear_down_cpu = tegra30_tear_down_cpu; -#endif return cpuidle_register(&tegra_idle_driver, NULL); } diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index 4b744c4661e..e85973cef03 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -27,25 +27,20 @@ #include "fuse.h" #include "cpuidle.h" -static int __init tegra_cpuidle_init(void) +void __init tegra_cpuidle_init(void) { - int ret; - switch (tegra_chip_id) { case TEGRA20: - ret = tegra20_cpuidle_init(); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra20_cpuidle_init(); break; case TEGRA30: - ret = tegra30_cpuidle_init(); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) + tegra30_cpuidle_init(); break; case TEGRA114: - ret = tegra114_cpuidle_init(); - break; - default: - ret = -ENODEV; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) + tegra114_cpuidle_init(); break; } - - return ret; } -device_initcall(tegra_cpuidle_init); diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h index d733f75d020..9ec2c1ab0fa 100644 --- a/arch/arm/mach-tegra/cpuidle.h +++ b/arch/arm/mach-tegra/cpuidle.h @@ -17,22 +17,13 @@ #ifndef __MACH_TEGRA_CPUIDLE_H #define __MACH_TEGRA_CPUIDLE_H -#ifdef CONFIG_ARCH_TEGRA_2x_SOC +#ifdef CONFIG_CPU_IDLE int tegra20_cpuidle_init(void); -#else -static inline int tegra20_cpuidle_init(void) { return -ENODEV; } -#endif - -#ifdef CONFIG_ARCH_TEGRA_3x_SOC int tegra30_cpuidle_init(void); -#else -static inline int tegra30_cpuidle_init(void) { return -ENODEV; } -#endif - -#ifdef CONFIG_ARCH_TEGRA_114_SOC int tegra114_cpuidle_init(void); +void tegra_cpuidle_init(void); #else -static inline int tegra114_cpuidle_init(void) { return -ENODEV; } +static inline void tegra_cpuidle_init(void) {} #endif #endif diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index 67eab56699b..7a29bae799a 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -25,6 +25,7 @@ #define FLOW_CTRL_WAITEVENT (2 << 29) #define FLOW_CTRL_WAIT_FOR_INTERRUPT (4 << 29) #define FLOW_CTRL_JTAG_RESUME (1 << 28) +#define FLOW_CTRL_SCLK_RESUME (1 << 27) #define FLOW_CTRL_HALT_CPU_IRQ (1 << 10) #define FLOW_CTRL_HALT_CPU_FIQ (1 << 8) #define FLOW_CTRL_CPU0_CSR 0x8 diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index aacc00d0598..def79683bef 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -19,16 +19,6 @@ #ifndef __MACH_TEGRA_FUSE_H #define __MACH_TEGRA_FUSE_H -enum tegra_revision { - TEGRA_REVISION_UNKNOWN = 0, - TEGRA_REVISION_A01, - TEGRA_REVISION_A02, - TEGRA_REVISION_A03, - TEGRA_REVISION_A03p, - TEGRA_REVISION_A04, - TEGRA_REVISION_MAX, -}; - #define SKU_ID_T20 8 #define SKU_ID_T25SE 20 #define SKU_ID_AP25 23 @@ -40,6 +30,17 @@ enum tegra_revision { #define TEGRA30 0x30 #define TEGRA114 0x35 +#ifndef __ASSEMBLY__ +enum tegra_revision { + TEGRA_REVISION_UNKNOWN = 0, + TEGRA_REVISION_A01, + TEGRA_REVISION_A02, + TEGRA_REVISION_A03, + TEGRA_REVISION_A03p, + TEGRA_REVISION_A04, + TEGRA_REVISION_MAX, +}; + extern int tegra_sku_id; extern int tegra_cpu_process_id; extern int tegra_core_process_id; @@ -72,5 +73,6 @@ void tegra114_init_speedo_data(void); #else static inline void tegra114_init_speedo_data(void) {} #endif +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index 184914a68d7..a52c10e0a85 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -46,6 +46,17 @@ void __ref tegra_cpu_die(unsigned int cpu) BUG(); } +int tegra_cpu_disable(unsigned int cpu) +{ + switch (tegra_chip_id) { + case TEGRA20: + case TEGRA30: + return cpu == 0 ? -EPERM : 0; + default: + return 0; + } +} + void __init tegra_hotplug_init(void) { if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) @@ -55,4 +66,6 @@ void __init tegra_hotplug_init(void) tegra_hotplug_shutdown = tegra20_hotplug_shutdown; if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30) tegra_hotplug_shutdown = tegra30_hotplug_shutdown; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114) + tegra_hotplug_shutdown = tegra30_hotplug_shutdown; } diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index fad4226ef71..24db4ac428a 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -140,8 +140,31 @@ remove_clamps: static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle) { + int ret = 0; + cpu = cpu_logical_map(cpu); - return tegra_pmc_cpu_power_on(cpu); + + if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) { + /* + * Warm boot flow + * The flow controller in charge of the power state and + * control for each CPU. + */ + /* set SCLK as event trigger for flow controller */ + flowctrl_write_cpu_csr(cpu, 1); + flowctrl_write_cpu_halt(cpu, + FLOW_CTRL_WAITEVENT | FLOW_CTRL_SCLK_RESUME); + } else { + /* + * Cold boot flow + * The CPU is powered up by toggling PMC directly. It will + * also initial power state in flow controller. After that, + * the CPU's power state is maintained by flow controller. + */ + ret = tegra_pmc_cpu_power_on(cpu); + } + + return ret; } static int __cpuinit tegra_boot_secondary(unsigned int cpu, @@ -173,5 +196,6 @@ struct smp_operations tegra_smp_ops __initdata = { #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = tegra_cpu_kill, .cpu_die = tegra_cpu_die, + .cpu_disable = tegra_cpu_disable, #endif }; diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 45cf52c7e52..94e69bee3da 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -44,6 +44,20 @@ static DEFINE_SPINLOCK(tegra_lp2_lock); void (*tegra_tear_down_cpu)(void); +static void tegra_tear_down_cpu_init(void) +{ + switch (tegra_chip_id) { + case TEGRA20: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra_tear_down_cpu = tegra20_tear_down_cpu; + break; + case TEGRA30: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) + tegra_tear_down_cpu = tegra30_tear_down_cpu; + break; + } +} + /* * restore_cpu_complex * @@ -91,8 +105,9 @@ static void suspend_cpu_complex(void) flowctrl_cpu_suspend_enter(cpu); } -void tegra_clear_cpu_in_lp2(int phy_cpu_id) +void tegra_clear_cpu_in_lp2(void) { + int phy_cpu_id = cpu_logical_map(smp_processor_id()); u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; spin_lock(&tegra_lp2_lock); @@ -103,8 +118,9 @@ void tegra_clear_cpu_in_lp2(int phy_cpu_id) spin_unlock(&tegra_lp2_lock); } -bool tegra_set_cpu_in_lp2(int phy_cpu_id) +bool tegra_set_cpu_in_lp2(void) { + int phy_cpu_id = cpu_logical_map(smp_processor_id()); bool last_cpu = false; cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask; u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; @@ -192,7 +208,7 @@ static int __cpuinit tegra_suspend_enter(suspend_state_t state) suspend_cpu_complex(); switch (mode) { case TEGRA_SUSPEND_LP2: - tegra_set_cpu_in_lp2(0); + tegra_set_cpu_in_lp2(); break; default: break; @@ -202,7 +218,7 @@ static int __cpuinit tegra_suspend_enter(suspend_state_t state) switch (mode) { case TEGRA_SUSPEND_LP2: - tegra_clear_cpu_in_lp2(0); + tegra_clear_cpu_in_lp2(); break; default: break; @@ -224,6 +240,7 @@ void __init tegra_init_suspend(void) if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE) return; + tegra_tear_down_cpu_init(); tegra_pmc_suspend_init(); suspend_set_ops(&tegra_suspend_ops); diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 778a4aa7c3f..94c4b9d9077 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -28,8 +28,8 @@ extern unsigned long l2x0_saved_regs_addr; void save_cpu_arch_register(void); void restore_cpu_arch_register(void); -void tegra_clear_cpu_in_lp2(int phy_cpu_id); -bool tegra_set_cpu_in_lp2(int phy_cpu_id); +void tegra_clear_cpu_in_lp2(void); +bool tegra_set_cpu_in_lp2(void); void tegra_idle_lp2_last(void); extern void (*tegra_tear_down_cpu)(void); diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index e6de88a2ea0..39dc9e7834f 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -22,11 +22,11 @@ #include <asm/hardware/cache-l2x0.h> #include "flowctrl.h" +#include "fuse.h" #include "iomap.h" #include "reset.h" #include "sleep.h" -#define APB_MISC_GP_HIDREV 0x804 #define PMC_SCRATCH41 0x140 #define RESET_DATA(x) ((TEGRA_RESET_##x)*4) @@ -38,34 +38,40 @@ * CPU boot vector when restarting the a CPU following * an LP2 transition. Also branched to by LP0 and LP1 resume after * re-enabling sdram. + * + * r6: SoC ID */ ENTRY(tegra_resume) bl v7_invalidate_l1 cpu_id r0 + tegra_get_soc_id TEGRA_APB_MISC_BASE, r6 + cmp r6, #TEGRA114 + beq no_cpu0_chk + cmp r0, #0 @ CPU0? THUMB( it ne ) bne cpu_resume @ no +no_cpu0_chk: -#ifdef CONFIG_ARCH_TEGRA_3x_SOC /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) + cmp r6, #TEGRA20 beq 1f @ Yes /* Clear the flow controller flags for this CPU. */ - mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR - ldr r1, [r2] + cpu_to_csr_reg r1, r0 + mov32 r2, TEGRA_FLOW_CTRL_BASE + ldr r1, [r2, r1] /* Clear event & intr flag */ orr r1, r1, \ #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - movw r0, #0x0FFD @ enable, cluster_switch, immed, & bitmaps + movw r0, #0x3FFD @ enable, cluster_switch, immed, bitmaps + @ & ext flags for CPU power mgnt bic r1, r1, r0 str r1, [r2] 1: -#endif + check_cpu_part_num 0xc09, r8, r9 + bne not_ca9 #ifdef CONFIG_HAVE_ARM_SCU /* enable SCU */ mov32 r0, TEGRA_ARM_PERIF_BASE @@ -76,6 +82,7 @@ ENTRY(tegra_resume) /* L2 cache resume & re-enable */ l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr +not_ca9: b cpu_resume ENDPROC(tegra_resume) @@ -98,7 +105,7 @@ ENTRY(__tegra_cpu_reset_handler_start) * Register usage within the reset handler: * * Others: scratch - * R6 = SoC ID << 8 + * R6 = SoC ID * R7 = CPU present (to the OS) mask * R8 = CPU in LP1 state mask * R9 = CPU in LP2 state mask @@ -115,12 +122,10 @@ ENTRY(__tegra_cpu_reset_handler) cpsid aif, 0x13 @ SVC mode, interrupts disabled - mov32 r6, TEGRA_APB_MISC_BASE - ldr r6, [r6, #APB_MISC_GP_HIDREV] - and r6, r6, #0xff00 + tegra_get_soc_id TEGRA_APB_MISC_BASE, r6 #ifdef CONFIG_ARCH_TEGRA_2x_SOC t20_check: - cmp r6, #(0x20 << 8) + cmp r6, #TEGRA20 bne after_t20_check t20_errata: # Tegra20 is a Cortex-A9 r1p1 @@ -136,7 +141,7 @@ after_t20_check: #endif #ifdef CONFIG_ARCH_TEGRA_3x_SOC t30_check: - cmp r6, #(0x30 << 8) + cmp r6, #TEGRA30 bne after_t30_check t30_errata: # Tegra30 is a Cortex-A9 r2p9 @@ -163,7 +168,7 @@ after_errata: #ifdef CONFIG_ARCH_TEGRA_2x_SOC /* Are we on Tegra20? */ - cmp r6, #(0x20 << 8) + cmp r6, #TEGRA20 bne 1f /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ mov32 r5, TEGRA_PMC_BASE @@ -186,11 +191,14 @@ __is_not_lp2: #ifdef CONFIG_SMP /* - * Can only be secondary boot (initial or hotplug) but CPU 0 - * cannot be here. + * Can only be secondary boot (initial or hotplug) + * CPU0 can't be here for Tegra20/30 */ + cmp r6, #TEGRA114 + beq __no_cpu0_chk cmp r10, #0 bleq __die @ CPU0 cannot be here +__no_cpu0_chk: ldr lr, [r12, #RESET_DATA(STARTUP_SECONDARY)] cmp lr, #0 bleq __die @ no secondary startup handler @@ -210,10 +218,7 @@ __die: mov32 r7, TEGRA_CLK_RESET_BASE /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) + cmp r6, #TEGRA20 bne 1f #ifdef CONFIG_ARCH_TEGRA_2x_SOC diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index d29dfcce948..ada8821b48b 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -19,6 +19,7 @@ #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include "fuse.h" #include "sleep.h" #include "flowctrl.h" @@ -43,14 +44,19 @@ ENDPROC(tegra30_hotplug_shutdown) * * Puts the current CPU in wait-for-event mode on the flow controller * and powergates it -- flags (in R0) indicate the request type. - * Must never be called for CPU 0. * - * corrupts r0-r4, r12 + * r10 = SoC ID + * corrupts r0-r4, r10-r12 */ ENTRY(tegra30_cpu_shutdown) cpu_id r3 + tegra_get_soc_id TEGRA_APB_MISC_VIRT, r10 + cmp r10, #TEGRA30 + bne _no_cpu0_chk @ It's not Tegra30 + cmp r3, #0 moveq pc, lr @ Must never be called for CPU 0 +_no_cpu0_chk: ldr r12, =TEGRA_FLOW_CTRL_VIRT cpu_to_csr_reg r1, r3 @@ -65,7 +71,9 @@ ENTRY(tegra30_cpu_shutdown) movw r12, \ FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \ FLOW_CTRL_CSR_ENABLE - mov r4, #(1 << 4) + cmp r10, #TEGRA30 + moveq r4, #(1 << 4) @ wfe bitmap + movne r4, #(1 << 8) @ wfi bitmap ARM( orr r12, r12, r4, lsl r3 ) THUMB( lsl r4, r4, r3 ) THUMB( orr r12, r12, r4 ) @@ -79,9 +87,20 @@ delay_1: cpsid a @ disable imprecise aborts. ldr r3, [r1] @ read CSR str r3, [r1] @ clear CSR + tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN + beq flow_ctrl_setting_for_lp2 + + /* flow controller set up for hotplug */ + mov r3, #FLOW_CTRL_WAITEVENT @ For hotplug + b flow_ctrl_done +flow_ctrl_setting_for_lp2: + /* flow controller set up for LP2 */ + cmp r10, #TEGRA30 moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2 - movne r3, #FLOW_CTRL_WAITEVENT @ For hotplug + movne r3, #FLOW_CTRL_WAITEVENT +flow_ctrl_done: + cmp r10, #TEGRA30 str r3, [r2] ldr r0, [r2] b wfe_war @@ -89,7 +108,8 @@ delay_1: __cpu_reset_again: dsb .align 5 - wfe @ CPU should be power gated here + wfeeq @ CPU should be power gated here + wfine wfe_war: b __cpu_reset_again diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 364d84523fb..9daaef26b0f 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -106,9 +106,11 @@ ENTRY(tegra_shut_off_mmu) isb #ifdef CONFIG_CACHE_L2X0 /* Disable L2 cache */ - mov32 r4, TEGRA_ARM_PERIF_BASE + 0x3000 - mov r5, #0 - str r5, [r4, #L2X0_CTRL] + check_cpu_part_num 0xc09, r9, r10 + movweq r4, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000) + movteq r4, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000) + moveq r5, #0 + streq r5, [r4, #L2X0_CTRL] #endif mov pc, r0 ENDPROC(tegra_shut_off_mmu) diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 2080fb12ce2..98b7da698f2 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -25,6 +25,8 @@ + IO_PPSB_VIRT) #define TEGRA_CLK_RESET_VIRT (TEGRA_CLK_RESET_BASE - IO_PPSB_PHYS \ + IO_PPSB_VIRT) +#define TEGRA_APB_MISC_VIRT (TEGRA_APB_MISC_BASE - IO_APB_PHYS \ + + IO_APB_VIRT) #define TEGRA_PMC_VIRT (TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT) /* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */ @@ -70,19 +72,40 @@ movt \reg, #:upper16:\val .endm +/* Marco to check CPU part num */ +.macro check_cpu_part_num part_num, tmp1, tmp2 + mrc p15, 0, \tmp1, c0, c0, 0 + ubfx \tmp1, \tmp1, #4, #12 + mov32 \tmp2, \part_num + cmp \tmp1, \tmp2 +.endm + /* Macro to exit SMP coherency. */ .macro exit_smp, tmp1, tmp2 mrc p15, 0, \tmp1, c1, c0, 1 @ ACTLR bic \tmp1, \tmp1, #(1<<6) | (1<<0) @ clear ACTLR.SMP | ACTLR.FW mcr p15, 0, \tmp1, c1, c0, 1 @ ACTLR isb - cpu_id \tmp1 - mov \tmp1, \tmp1, lsl #2 - mov \tmp2, #0xf - mov \tmp2, \tmp2, lsl \tmp1 - mov32 \tmp1, TEGRA_ARM_PERIF_VIRT + 0xC - str \tmp2, [\tmp1] @ invalidate SCU tags for CPU +#ifdef CONFIG_HAVE_ARM_SCU + check_cpu_part_num 0xc09, \tmp1, \tmp2 + mrceq p15, 0, \tmp1, c0, c0, 5 + andeq \tmp1, \tmp1, #0xF + moveq \tmp1, \tmp1, lsl #2 + moveq \tmp2, #0xf + moveq \tmp2, \tmp2, lsl \tmp1 + ldreq \tmp1, =(TEGRA_ARM_PERIF_VIRT + 0xC) + streq \tmp2, [\tmp1] @ invalidate SCU tags for CPU dsb +#endif +.endm + +/* Macro to check Tegra revision */ +#define APB_MISC_GP_HIDREV 0x804 +.macro tegra_get_soc_id base, tmp1 + mov32 \tmp1, \base + ldr \tmp1, [\tmp1, #APB_MISC_GP_HIDREV] + and \tmp1, \tmp1, #0xff00 + mov \tmp1, \tmp1, lsr #8 .endm /* Macro to resume & re-enable L2 cache */ diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index 31e69a019bd..3ae4a7f1a2f 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -183,7 +183,7 @@ static struct device_node *tegra_emc_ramcode_devnode(struct device_node *np) u32 reg; for_each_child_of_node(np, iter) { - if (of_property_read_u32(np, "nvidia,ram-code", ®)) + if (of_property_read_u32(iter, "nvidia,ram-code", ®)) continue; if (reg == tegra_bct_strapping) return of_node_get(iter); diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 1f597647d43..a85adcd0088 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,24 +1,46 @@ -if ARCH_U300 - menu "ST-Ericsson AB U300/U335 Platform" comment "ST-Ericsson Mobile Platform Products" -config MACH_U300 - bool "U300" +config ARCH_U300 + bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5 + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_PATCH_PHYS_VIRT + select ARM_VIC + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CLKSRC_OF + select COMMON_CLK + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select HAVE_TCM select PINCTRL select PINCTRL_COH901 select PINCTRL_U300 + select SPARSE_IRQ + select MFD_SYSCON + select USE_OF + help + Support for ST-Ericsson U300 series mobile platforms. comment "ST-Ericsson U300/U335 Feature Selections" +config MACH_U300 + depends on ARCH_U300 + bool "U300" + default y + config U300_DEBUG + depends on ARCH_U300 bool "Debug support for U300" depends on PM help Debug support for U300 in sysfs, procfs etc. config MACH_U300_SPIDUMMY + depends on ARCH_U300 bool "SSP/SPI dummy chip" select SPI select SPI_MASTER @@ -31,5 +53,3 @@ config MACH_U300_SPIDUMMY SPI framework and ARM PL022 support. endmenu - -endif diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 5a86c58da39..0f362b64fb8 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -7,7 +7,5 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_SPI_PL022) += spi.o obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o -obj-$(CONFIG_I2C_STU300) += i2c.o obj-$(CONFIG_REGULATOR_AB3100) += regulator.o diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index a683d17b2ce..4f7ac2a1145 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -9,46 +9,157 @@ * Author: Linus Walleij <linus.walleij@stericsson.com> */ #include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/termios.h> -#include <linux/dmaengine.h> -#include <linux/amba/bus.h> -#include <linux/amba/mmci.h> -#include <linux/amba/serial.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/fsmc.h> #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> -#include <linux/dma-mapping.h> #include <linux/platform_data/clk-u300.h> -#include <linux/platform_data/pinctrl-coh901.h> -#include <linux/platform_data/dma-coh901318.h> -#include <linux/irqchip/arm-vic.h> +#include <linux/irqchip.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/clocksource.h> +#include <linux/clk.h> -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> #include <asm/mach/map.h> -#include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/syscon.h> -#include <mach/irqs.h> +/* + * These are the large blocks of memory allocated for I/O. + * the defines are used for setting up the I/O memory mapping. + */ + +/* NAND Flash CS0 */ +#define U300_NAND_CS0_PHYS_BASE 0x80000000 +/* NFIF */ +#define U300_NAND_IF_PHYS_BASE 0x9f800000 +/* ALE, CLE offset for FSMC NAND */ +#define PLAT_NAND_CLE (1 << 16) +#define PLAT_NAND_ALE (1 << 17) +/* AHB Peripherals */ +#define U300_AHB_PER_PHYS_BASE 0xa0000000 +#define U300_AHB_PER_VIRT_BASE 0xff010000 +/* FAST Peripherals */ +#define U300_FAST_PER_PHYS_BASE 0xc0000000 +#define U300_FAST_PER_VIRT_BASE 0xff020000 +/* SLOW Peripherals */ +#define U300_SLOW_PER_PHYS_BASE 0xc0010000 +#define U300_SLOW_PER_VIRT_BASE 0xff000000 +/* Boot ROM */ +#define U300_BOOTROM_PHYS_BASE 0xffff0000 +#define U300_BOOTROM_VIRT_BASE 0xffff0000 +/* SEMI config base */ +#define U300_SEMI_CONFIG_BASE 0x2FFE0000 + +/* + * AHB peripherals + */ + +/* AHB Peripherals Bridge Controller */ +#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000) +/* Vectored Interrupt Controller 0, servicing 32 interrupts */ +#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) +#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000) +/* Vectored Interrupt Controller 1, servicing 32 interrupts */ +#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) +#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000) +/* Memory Stick Pro (MSPRO) controller */ +#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) +/* EMIF Configuration Area */ +#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000) + +/* + * FAST peripherals + */ + +/* FAST bridge control */ +#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000) +/* MMC/SD controller */ +#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000) +/* PCM I2S0 controller */ +#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000) +/* PCM I2S1 controller */ +#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000) +/* I2C0 controller */ +#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000) +/* I2C1 controller */ +#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000) +/* SPI controller */ +#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) +/* Fast UART1 on U335 only */ +#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000) + +/* + * SLOW peripherals + */ + +/* SLOW bridge control */ +#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE) +/* SYSCON */ +#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) +#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000) +/* Watchdog */ +#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) +/* UART0 */ +#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000) +/* APP side special timer */ +#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) +#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000) +/* Keypad */ +#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) +/* GPIO */ +#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000) +/* RTC */ +#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) +/* Bus tracer */ +#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000) +/* Event handler (hardware queue) */ +#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000) +/* Genric Timer */ +#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000) +/* PPM */ +#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000) + +/* + * REST peripherals + */ + +/* ISP (image signal processor) */ +#define U300_ISP_BASE (0xA0008000) +/* DMA Controller base */ +#define U300_DMAC_BASE (0xC0020000) +/* MSL Base */ +#define U300_MSL_BASE (0xc0022000) +/* APEX Base */ +#define U300_APEX_BASE (0xc0030000) +/* Video Encoder Base */ +#define U300_VIDEOENC_BASE (0xc0080000) +/* XGAM Base */ +#define U300_XGAM_BASE (0xd0000000) + +/* + * SYSCON addresses applicable to the core machine. + */ -#include "timer.h" -#include "spi.h" -#include "i2c.h" -#include "u300-gpio.h" +/* Chip ID register 16bit (R/-) */ +#define U300_SYSCON_CIDR (0x400) +/* SMCR */ +#define U300_SYSCON_SMCR (0x4d0) +#define U300_SYSCON_SMCR_FIELD_MASK (0x000e) +#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008) +#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004) +#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002) +/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */ +#define U300_SYSCON_CSDR (0x4f0) +#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001) +/* PRINT_CONTROL Print Control 16bit (R/-) */ +#define U300_SYSCON_PCR (0x4f8) +#define U300_SYSCON_PCR_SERV_IND (0x0001) +/* BOOT_CONTROL 16bit (R/-) */ +#define U300_SYSCON_BCR (0x4fc) +#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400) +#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200) +#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC) +#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003) + +static void __iomem *syscon_base; /* * Static I/O mappings that are needed for booting the U300 platforms. The @@ -82,365 +193,6 @@ static void __init u300_map_io(void) iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); } -/* - * Declaration of devices found on the U300 board and - * their respective memory locations. - */ - -static struct amba_pl011_data uart0_plat_data = { -#ifdef CONFIG_COH901318 - .dma_filter = coh901318_filter_id, - .dma_rx_param = (void *) U300_DMA_UART0_RX, - .dma_tx_param = (void *) U300_DMA_UART0_TX, -#endif -}; - -/* Slow device at 0x3000 offset */ -static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, - { IRQ_U300_UART0 }, &uart0_plat_data); - -/* The U335 have an additional UART1 on the APP CPU */ -static struct amba_pl011_data uart1_plat_data = { -#ifdef CONFIG_COH901318 - .dma_filter = coh901318_filter_id, - .dma_rx_param = (void *) U300_DMA_UART1_RX, - .dma_tx_param = (void *) U300_DMA_UART1_TX, -#endif -}; - -/* Fast device at 0x7000 offset */ -static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, - { IRQ_U300_UART1 }, &uart1_plat_data); - -/* AHB device at 0x4000 offset */ -static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); - -/* Fast device at 0x6000 offset */ -static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE, - { IRQ_U300_SPI }, NULL); - -/* Fast device at 0x1000 offset */ -#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 } - -static struct mmci_platform_data mmcsd_platform_data = { - /* - * Do not set ocr_mask or voltage translation function, - * we have a regulator we can control instead. - */ - .f_max = 24000000, - .gpio_wp = -1, - .gpio_cd = U300_GPIO_PIN_MMC_CD, - .cd_invert = true, - .capabilities = MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, -#ifdef CONFIG_COH901318 - .dma_filter = coh901318_filter_id, - .dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX, - /* Don't specify a TX channel, this RX channel is bidirectional */ -#endif -}; - -static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, - U300_MMCSD_IRQS, &mmcsd_platform_data); - -/* - * The order of device declaration may be important, since some devices - * have dependencies on other devices being initialized first. - */ -static struct amba_device *amba_devs[] __initdata = { - &uart0_device, - &uart1_device, - &pl022_device, - &pl172_device, - &mmcsd_device, -}; - -/* Here follows a list of all hw resources that the platform devices - * allocate. Note, clock dependencies are not included - */ - -static struct resource gpio_resources[] = { - { - .start = U300_GPIO_BASE, - .end = (U300_GPIO_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - { - .name = "gpio0", - .start = IRQ_U300_GPIO_PORT0, - .end = IRQ_U300_GPIO_PORT0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio1", - .start = IRQ_U300_GPIO_PORT1, - .end = IRQ_U300_GPIO_PORT1, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio2", - .start = IRQ_U300_GPIO_PORT2, - .end = IRQ_U300_GPIO_PORT2, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio3", - .start = IRQ_U300_GPIO_PORT3, - .end = IRQ_U300_GPIO_PORT3, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio4", - .start = IRQ_U300_GPIO_PORT4, - .end = IRQ_U300_GPIO_PORT4, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio5", - .start = IRQ_U300_GPIO_PORT5, - .end = IRQ_U300_GPIO_PORT5, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio6", - .start = IRQ_U300_GPIO_PORT6, - .end = IRQ_U300_GPIO_PORT6, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource keypad_resources[] = { - { - .start = U300_KEYPAD_BASE, - .end = U300_KEYPAD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "coh901461-press", - .start = IRQ_U300_KEYPAD_KEYBF, - .end = IRQ_U300_KEYPAD_KEYBF, - .flags = IORESOURCE_IRQ, - }, - { - .name = "coh901461-release", - .start = IRQ_U300_KEYPAD_KEYBR, - .end = IRQ_U300_KEYPAD_KEYBR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource rtc_resources[] = { - { - .start = U300_RTC_BASE, - .end = U300_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_RTC, - .end = IRQ_U300_RTC, - .flags = IORESOURCE_IRQ, - }, -}; - -/* - * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2) - * but these are not yet used by the driver. - */ -static struct resource fsmc_resources[] = { - { - .name = "nand_addr", - .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE, - .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "nand_cmd", - .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE, - .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "nand_data", - .start = U300_NAND_CS0_PHYS_BASE, - .end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "fsmc_regs", - .start = U300_NAND_IF_PHYS_BASE, - .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource i2c0_resources[] = { - { - .start = U300_I2C0_BASE, - .end = U300_I2C0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_I2C0, - .end = IRQ_U300_I2C0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource i2c1_resources[] = { - { - .start = U300_I2C1_BASE, - .end = U300_I2C1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_I2C1, - .end = IRQ_U300_I2C1, - .flags = IORESOURCE_IRQ, - }, - -}; - -static struct resource wdog_resources[] = { - { - .start = U300_WDOG_BASE, - .end = U300_WDOG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_WDOG, - .end = IRQ_U300_WDOG, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource dma_resource[] = { - { - .start = U300_DMAC_BASE, - .end = U300_DMAC_BASE + PAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_DMA, - .end = IRQ_U300_DMA, - .flags = IORESOURCE_IRQ, - } -}; - - -static struct resource pinctrl_resources[] = { - { - .start = U300_SYSCON_BASE, - .end = U300_SYSCON_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device wdog_device = { - .name = "coh901327_wdog", - .id = -1, - .num_resources = ARRAY_SIZE(wdog_resources), - .resource = wdog_resources, -}; - -static struct platform_device i2c0_device = { - .name = "stu300", - .id = 0, - .num_resources = ARRAY_SIZE(i2c0_resources), - .resource = i2c0_resources, -}; - -static struct platform_device i2c1_device = { - .name = "stu300", - .id = 1, - .num_resources = ARRAY_SIZE(i2c1_resources), - .resource = i2c1_resources, -}; - -static struct platform_device pinctrl_device = { - .name = "pinctrl-u300", - .id = -1, - .num_resources = ARRAY_SIZE(pinctrl_resources), - .resource = pinctrl_resources, -}; - -/* - * The different variants have a few different versions of the - * GPIO block, with different number of ports. - */ -static struct u300_gpio_platform u300_gpio_plat = { - .ports = 7, - .gpio_base = 0, -}; - -static struct platform_device gpio_device = { - .name = "u300-gpio", - .id = -1, - .num_resources = ARRAY_SIZE(gpio_resources), - .resource = gpio_resources, - .dev = { - .platform_data = &u300_gpio_plat, - }, -}; - -static struct platform_device keypad_device = { - .name = "keypad", - .id = -1, - .num_resources = ARRAY_SIZE(keypad_resources), - .resource = keypad_resources, -}; - -static struct platform_device rtc_device = { - .name = "rtc-coh901331", - .id = -1, - .num_resources = ARRAY_SIZE(rtc_resources), - .resource = rtc_resources, -}; - -static struct mtd_partition u300_partitions[] = { - { - .name = "bootrecords", - .offset = 0, - .size = SZ_128K, - }, - { - .name = "free", - .offset = SZ_128K, - .size = 8064 * SZ_1K, - }, - { - .name = "platform", - .offset = 8192 * SZ_1K, - .size = 253952 * SZ_1K, - }, -}; - -static struct fsmc_nand_platform_data nand_platform_data = { - .partitions = u300_partitions, - .nr_partitions = ARRAY_SIZE(u300_partitions), - .options = NAND_SKIP_BBTSCAN, - .width = FSMC_NAND_BW8, -}; - -static struct platform_device nand_device = { - .name = "fsmc-nand", - .id = -1, - .resource = fsmc_resources, - .num_resources = ARRAY_SIZE(fsmc_resources), - .dev = { - .platform_data = &nand_platform_data, - }, -}; - -static struct platform_device dma_device = { - .name = "coh901318", - .id = -1, - .resource = dma_resource, - .num_resources = ARRAY_SIZE(dma_resource), - .dev = { - .coherent_dma_mask = ~0, - }, -}; - static unsigned long pin_pullup_conf[] = { PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1), }; @@ -467,61 +219,6 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = { pin_highz_conf), }; -/* - * Notice that AMBA devices are initialized before platform devices. - * - */ -static struct platform_device *platform_devs[] __initdata = { - &dma_device, - &i2c0_device, - &i2c1_device, - &keypad_device, - &rtc_device, - &pinctrl_device, - &gpio_device, - &nand_device, - &wdog_device, -}; - -/* - * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected - * together so some interrupts are connected to the first one and some - * to the second one. - */ -static void __init u300_init_irq(void) -{ - u32 mask[2] = {0, 0}; - struct clk *clk; - int i; - - /* initialize clocking early, we want to clock the INTCON */ - u300_clk_init(U300_SYSCON_VBASE); - - /* Bootstrap EMIF and SEMI clocks */ - clk = clk_get_sys("pl172", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - clk = clk_get_sys("semi", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - - /* Clock the interrupt controller */ - clk = clk_get_sys("intcon", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - - for (i = 0; i < U300_VIC_IRQS_END; i++) - set_bit(i, (unsigned long *) &mask[0]); - vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START, - mask[0], mask[0]); - vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START, - mask[1], mask[1]); -} - - -/* - * U300 platforms peripheral handling - */ struct db_chip { u16 chipid; const char *name; @@ -578,7 +275,7 @@ static void __init u300_init_check_chip(void) const char unknown[] = "UNKNOWN"; /* Read out and print chip ID */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR); + val = readw(syscon_base + U300_SYSCON_CIDR); /* This is in funky bigendian order... */ val = (val & 0xFFU) << 8 | (val >> 8); chip = db_chips; @@ -600,74 +297,6 @@ static void __init u300_init_check_chip(void) } } -/* - * Some devices and their resources require reserved physical memory from - * the end of the available RAM. This function traverses the list of devices - * and assigns actual addresses to these. - */ -static void __init u300_assign_physmem(void) -{ - unsigned long curr_start = __pa(high_memory); - int i, j; - - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) { - for (j = 0; j < platform_devs[i]->num_resources; j++) { - struct resource *const res = - &platform_devs[i]->resource[j]; - - if (IORESOURCE_MEM == res->flags && - 0 == res->start) { - res->start = curr_start; - res->end += curr_start; - curr_start += resource_size(res); - - printk(KERN_INFO "core.c: Mapping RAM " \ - "%#x-%#x to device %s:%s\n", - res->start, res->end, - platform_devs[i]->name, res->name); - } - } - } -} - -static void __init u300_init_machine(void) -{ - int i; - u16 val; - - /* Check what platform we run and print some status information */ - u300_init_check_chip(); - - /* Initialize SPI device with some board specifics */ - u300_spi_init(&pl022_device); - - /* Register the AMBA devices in the AMBA bus abstraction layer */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - - u300_assign_physmem(); - - /* Initialize pinmuxing */ - pinctrl_register_mappings(u300_pinmux_map, - ARRAY_SIZE(u300_pinmux_map)); - - /* Register subdevices on the I2C buses */ - u300_i2c_register_board_devices(); - - /* Register the platform devices */ - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - - /* Register subdevices on the SPI bus */ - u300_spi_register_board_devices(); - - /* Enable SEMI self refresh */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) | - U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR); -} - /* Forward declare this function from the watchdog */ void coh901327_watchdog_reset(void); @@ -688,13 +317,99 @@ static void u300_restart(char mode, const char *cmd) while (1); } -MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") - /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .atag_offset = 0x100, +/* These are mostly to get the right device names for the clock lookups */ +static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("stericsson,pinctrl-u300", U300_SYSCON_BASE, + "pinctrl-u300", NULL), + OF_DEV_AUXDATA("stericsson,gpio-coh901", U300_GPIO_BASE, + "u300-gpio", NULL), + OF_DEV_AUXDATA("stericsson,coh901327", U300_WDOG_BASE, + "coh901327_wdog", NULL), + OF_DEV_AUXDATA("stericsson,coh901331", U300_RTC_BASE, + "rtc-coh901331", NULL), + OF_DEV_AUXDATA("stericsson,coh901318", U300_DMAC_BASE, + "coh901318", NULL), + OF_DEV_AUXDATA("stericsson,fsmc-nand", U300_NAND_IF_PHYS_BASE, + "fsmc-nand", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_UART0_BASE, + "uart0", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_UART1_BASE, + "uart1", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_SPI_BASE, + "pl022", NULL), + OF_DEV_AUXDATA("st,ddci2c", U300_I2C0_BASE, + "stu300.0", NULL), + OF_DEV_AUXDATA("st,ddci2c", U300_I2C1_BASE, + "stu300.1", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_MMCSD_BASE, + "mmci", NULL), + { /* sentinel */ }, +}; + +static void __init u300_init_irq_dt(void) +{ + struct device_node *syscon; + struct clk *clk; + + syscon = of_find_node_by_path("/syscon@c0011000"); + if (!syscon) { + pr_crit("could not find syscon node\n"); + return; + } + syscon_base = of_iomap(syscon, 0); + if (!syscon_base) { + pr_crit("could not remap syscon\n"); + return; + } + /* initialize clocking early, we want to clock the INTCON */ + u300_clk_init(syscon_base); + + /* Bootstrap EMIF and SEMI clocks */ + clk = clk_get_sys("pl172", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + clk = clk_get_sys("semi", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + + /* Clock the interrupt controller */ + clk = clk_get_sys("intcon", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + + irqchip_init(); +} + +static void __init u300_init_machine_dt(void) +{ + u16 val; + + /* Check what platform we run and print some status information */ + u300_init_check_chip(); + + /* Initialize pinmuxing */ + pinctrl_register_mappings(u300_pinmux_map, + ARRAY_SIZE(u300_pinmux_map)); + + of_platform_populate(NULL, of_default_bus_match_table, + u300_auxdata_lookup, NULL); + + /* Enable SEMI self refresh */ + val = readw(syscon_base + U300_SYSCON_SMCR) | + U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE; + writew(val, syscon_base + U300_SYSCON_SMCR); +} + +static const char * u300_board_compat[] = { + "stericsson,u300", + NULL, +}; + +DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)") .map_io = u300_map_io, - .nr_irqs = 0, - .init_irq = u300_init_irq, - .init_time = u300_timer_init, - .init_machine = u300_init_machine, + .init_irq = u300_init_irq_dt, + .init_time = clocksource_of_init, + .init_machine = u300_init_machine_dt, .restart = u300_restart, + .dt_compat = u300_board_compat, MACHINE_END diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c index 2785cb67b5e..ec0283cf9a3 100644 --- a/arch/arm/mach-u300/dummyspichip.c +++ b/arch/arm/mach-u300/dummyspichip.c @@ -263,28 +263,22 @@ static int pl022_dummy_remove(struct spi_device *spi) return 0; } +static const struct of_device_id pl022_dummy_dt_match[] = { + { .compatible = "arm,pl022-dummy" }, + {}, +}; + static struct spi_driver pl022_dummy_driver = { .driver = { .name = "spi-dummy", .owner = THIS_MODULE, + .of_match_table = pl022_dummy_dt_match, }, .probe = pl022_dummy_probe, .remove = pl022_dummy_remove, }; -static int __init pl022_init_dummy(void) -{ - return spi_register_driver(&pl022_dummy_driver); -} - -static void __exit pl022_exit_dummy(void) -{ - spi_unregister_driver(&pl022_dummy_driver); -} - -module_init(pl022_init_dummy); -module_exit(pl022_exit_dummy); - +module_spi_driver(pl022_dummy_driver); MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver"); MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c deleted file mode 100644 index 96800aa1316..00000000000 --- a/arch/arm/mach-u300/i2c.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * arch/arm/mach-u300/i2c.c - * - * Copyright (C) 2009-2012 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Register board i2c devices - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/mfd/ab3100.h> -#include <linux/regulator/machine.h> -#include <linux/amba/bus.h> -#include <mach/irqs.h> - -/* - * Initial settings of ab3100 registers. - * Common for below LDO regulator settings are that - * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0). - * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode. - */ - -/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */ -#define LDO_A_SETTING 0x16 -/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_C_SETTING 0x10 -/* LDO_D 0x10: 2.65V, ON, sleep mode not used */ -#define LDO_D_SETTING 0x10 -/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_E_SETTING 0x10 -/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */ -#define LDO_E_SLEEP_SETTING 0x00 -/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_F_SETTING 0xD0 -/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */ -#define LDO_G_SETTING 0x00 -/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */ -#define LDO_H_SETTING 0x18 -/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */ -#define LDO_K_SETTING 0x00 -/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */ -#define LDO_EXT_SETTING 0x00 -/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */ -#define BUCK_SETTING 0x7D -/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */ -#define BUCK_SLEEP_SETTING 0xAC - -#ifdef CONFIG_AB3100_CORE -static struct regulator_consumer_supply supply_ldo_c[] = { - { - .dev_name = "ab3100-codec", - .supply = "vaudio", /* Powers the codec */ - }, -}; - -/* - * This one needs to be a supply so we can turn it off - * in order to shut down the system. - */ -static struct regulator_consumer_supply supply_ldo_d[] = { - { - .supply = "vana15", /* Powers the SoC (CPU etc) */ - }, -}; - -static struct regulator_consumer_supply supply_ldo_g[] = { - { - .dev_name = "mmci", - .supply = "vmmc", /* Powers MMC/SD card */ - }, -}; - -static struct regulator_consumer_supply supply_ldo_h[] = { - { - .dev_name = "xgam_pdi", - .supply = "vdisp", /* Powers camera, display etc */ - }, -}; - -static struct regulator_consumer_supply supply_ldo_k[] = { - { - .dev_name = "irda", - .supply = "vir", /* Power IrDA */ - }, -}; - -/* - * This is a placeholder for whoever wish to use the - * external power. - */ -static struct regulator_consumer_supply supply_ldo_ext[] = { - { - .supply = "vext", /* External power */ - }, -}; - -/* Preset (hardware defined) voltages for these regulators */ -#define LDO_A_VOLTAGE 2750000 -#define LDO_C_VOLTAGE 2650000 -#define LDO_D_VOLTAGE 2650000 - -static struct ab3100_platform_data ab3100_plf_data = { - .reg_constraints = { - /* LDO A routing and constraints */ - { - .constraints = { - .name = "vrad", - .min_uV = LDO_A_VOLTAGE, - .max_uV = LDO_A_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .boot_on = 1, - }, - }, - /* LDO C routing and constraints */ - { - .constraints = { - .min_uV = LDO_C_VOLTAGE, - .max_uV = LDO_C_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_c), - .consumer_supplies = supply_ldo_c, - }, - /* LDO D routing and constraints */ - { - .constraints = { - .min_uV = LDO_D_VOLTAGE, - .max_uV = LDO_D_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - /* - * Actually this is boot_on but we need - * to reference count it externally to - * be able to shut down the system. - */ - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_d), - .consumer_supplies = supply_ldo_d, - }, - /* LDO E routing and constraints */ - { - .constraints = { - .name = "vio", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .boot_on = 1, - }, - }, - /* LDO F routing and constraints */ - { - .constraints = { - .name = "vana25", - .min_uV = 2500000, - .max_uV = 2500000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .boot_on = 1, - }, - }, - /* LDO G routing and constraints */ - { - .constraints = { - .min_uV = 1500000, - .max_uV = 2850000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_g), - .consumer_supplies = supply_ldo_g, - }, - /* LDO H routing and constraints */ - { - .constraints = { - .min_uV = 1200000, - .max_uV = 2750000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_h), - .consumer_supplies = supply_ldo_h, - }, - /* LDO K routing and constraints */ - { - .constraints = { - .min_uV = 1800000, - .max_uV = 2750000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_k), - .consumer_supplies = supply_ldo_k, - }, - /* External regulator interface. No fixed voltage specified. - * If we knew the voltage of the external regulator and it - * was connected on the board, we could add the (fixed) - * voltage for it here. - */ - { - .constraints = { - .min_uV = 0, - .max_uV = 0, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext), - .consumer_supplies = supply_ldo_ext, - }, - /* Buck converter routing and constraints */ - { - .constraints = { - .name = "vcore", - .min_uV = 1200000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - }, - }, - }, - .reg_initvals = { - LDO_A_SETTING, - LDO_C_SETTING, - LDO_E_SETTING, - LDO_E_SLEEP_SETTING, - LDO_F_SETTING, - LDO_G_SETTING, - LDO_H_SETTING, - LDO_K_SETTING, - LDO_EXT_SETTING, - BUCK_SETTING, - BUCK_SLEEP_SETTING, - LDO_D_SETTING, - }, -}; -#endif - -static struct i2c_board_info __initdata bus0_i2c_board_info[] = { -#ifdef CONFIG_AB3100_CORE - { - .type = "ab3100", - .addr = 0x48, - .irq = IRQ_U300_IRQ0_EXT, - .platform_data = &ab3100_plf_data, - }, -#else - { }, -#endif -}; - -static struct i2c_board_info __initdata bus1_i2c_board_info[] = { - { - .type = "fwcam", - .addr = 0x10, - }, - { - .type = "fwcam", - .addr = 0x5d, - }, -}; - -void __init u300_i2c_register_board_devices(void) -{ - i2c_register_board_info(0, bus0_i2c_board_info, - ARRAY_SIZE(bus0_i2c_board_info)); - /* - * This makes the core shut down all unused regulators - * after all the initcalls have completed. - */ - regulator_has_full_constraints(); - i2c_register_board_info(1, bus1_i2c_board_info, - ARRAY_SIZE(bus1_i2c_board_info)); -} diff --git a/arch/arm/mach-u300/i2c.h b/arch/arm/mach-u300/i2c.h deleted file mode 100644 index 485c02e5c06..00000000000 --- a/arch/arm/mach-u300/i2c.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-u300/i2c.h - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Register board i2c devices - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef MACH_U300_I2C_H -#define MACH_U300_I2C_H - -#ifdef CONFIG_I2C_STU300 -void __init u300_i2c_register_board_devices(void); -#else -/* Compile out this stuff if no I2C adapter is available */ -static inline void __init u300_i2c_register_board_devices(void) -{ -} -#endif - -#endif diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h deleted file mode 100644 index b99d4ce0ac2..00000000000 --- a/arch/arm/mach-u300/include/mach/hardware.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-u300/include/mach/hardware.h - */ -#include <asm/sizes.h> -#include <mach/u300-regs.h> diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h deleted file mode 100644 index 21d5e76a6cd..00000000000 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/irqs.h - * - * - * Copyright (C) 2006-2012 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * IRQ channel definitions for the U300 platforms. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define IRQ_U300_INTCON0_START 32 -#define IRQ_U300_INTCON1_START 64 -/* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 32 -#define IRQ_U300_IRQ1_EXT 33 -#define IRQ_U300_DMA 34 -#define IRQ_U300_VIDEO_ENC_0 35 -#define IRQ_U300_VIDEO_ENC_1 36 -#define IRQ_U300_AAIF_RX 37 -#define IRQ_U300_AAIF_TX 38 -#define IRQ_U300_AAIF_VGPIO 39 -#define IRQ_U300_AAIF_WAKEUP 40 -#define IRQ_U300_PCM_I2S0_FRAME 41 -#define IRQ_U300_PCM_I2S0_FIFO 42 -#define IRQ_U300_PCM_I2S1_FRAME 43 -#define IRQ_U300_PCM_I2S1_FIFO 44 -#define IRQ_U300_XGAM_GAMCON 45 -#define IRQ_U300_XGAM_CDI 46 -#define IRQ_U300_XGAM_CDICON 47 -#define IRQ_U300_XGAM_PDI 49 -#define IRQ_U300_XGAM_PDICON 50 -#define IRQ_U300_XGAM_GAMEACC 51 -#define IRQ_U300_XGAM_MCIDCT 52 -#define IRQ_U300_APEX 53 -#define IRQ_U300_UART0 54 -#define IRQ_U300_SPI 55 -#define IRQ_U300_TIMER_APP_OS 56 -#define IRQ_U300_TIMER_APP_DD 57 -#define IRQ_U300_TIMER_APP_GP1 58 -#define IRQ_U300_TIMER_APP_GP2 59 -#define IRQ_U300_TIMER_OS 60 -#define IRQ_U300_TIMER_MS 61 -#define IRQ_U300_KEYPAD_KEYBF 62 -#define IRQ_U300_KEYPAD_KEYBR 63 -/* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 64 -#define IRQ_U300_GPIO_PORT1 65 -#define IRQ_U300_GPIO_PORT2 66 - -/* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 67 -#define IRQ_U300_EVHIST 68 -#define IRQ_U300_MSPRO 69 -#define IRQ_U300_MMCSD_MCIINTR0 70 -#define IRQ_U300_MMCSD_MCIINTR1 71 -#define IRQ_U300_I2C0 72 -#define IRQ_U300_I2C1 73 -#define IRQ_U300_RTC 74 -#define IRQ_U300_NFIF 75 -#define IRQ_U300_NFIF2 76 - -/* The DB3350-specific interrupt lines */ -#define IRQ_U300_ISP_F0 77 -#define IRQ_U300_ISP_F1 78 -#define IRQ_U300_ISP_F2 79 -#define IRQ_U300_ISP_F3 80 -#define IRQ_U300_ISP_F4 81 -#define IRQ_U300_GPIO_PORT3 82 -#define IRQ_U300_SYSCON_PLL_LOCK 83 -#define IRQ_U300_UART1 84 -#define IRQ_U300_GPIO_PORT4 85 -#define IRQ_U300_GPIO_PORT5 86 -#define IRQ_U300_GPIO_PORT6 87 -#define U300_VIC_IRQS_END 88 - -#endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h deleted file mode 100644 index 10bdd0be977..00000000000 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ /dev/null @@ -1,592 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/syscon.h - * - * - * Copyright (C) 2008-2012 ST-Ericsson AB - * - * Author: Rickard Andersson <rickard.andersson@stericsson.com> - */ - -#ifndef __MACH_SYSCON_H -#define __MACH_SYSCON_H - -/* - * All register defines for SYSCON registers that concerns individual - * block clocks and reset lines are registered here. This is because - * we don't want any other file to try to fool around with this stuff. - */ - -/* APP side SYSCON registers */ -/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */ -/* CLK Control Register 16bit (R/W) */ -#define U300_SYSCON_CCR (0x0000) -#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040) -#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020) -#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00) -/* CLK Status Register 16bit (R/W) */ -#define U300_SYSCON_CSR (0x0004) -#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002) -#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) -/* Reset lines for SLOW devices 16bit (R/W) */ -#define U300_SYSCON_RSR (0x0014) -#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) -#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) -#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) -#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) -#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020) -#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010) -#define U300_SYSCON_RSR_EH_RESET_EN (0x0008) -#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004) -#define U300_SYSCON_RSR_UART_RESET_EN (0x0002) -#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) -/* Reset lines for FAST devices 16bit (R/W) */ -#define U300_SYSCON_RFR (0x0018) -#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) -#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) -#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) -#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) -#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008) -#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004) -#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002) -#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) -/* Reset lines for the rest of the peripherals 16bit (R/W) */ -#define U300_SYSCON_RRR (0x001c) -#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) -#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) -#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) -#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) -#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) -#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080) -#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040) -#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020) -#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010) -#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008) -#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004) -#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002) -#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) -/* Clock enable for SLOW peripherals 16bit (R/W) */ -#define U300_SYSCON_CESR (0x0020) -#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) -#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) -#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) -#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) -#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010) -#define U300_SYSCON_CESR_EH_CLK_EN (0x0008) -#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004) -#define U300_SYSCON_CESR_UART_CLK_EN (0x0002) -#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) -/* Clock enable for FAST peripherals 16bit (R/W) */ -#define U300_SYSCON_CEFR (0x0024) -#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) -#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) -#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) -#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) -#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) -#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) -#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) -#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) -#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) -#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) -/* Clock enable for the rest of the peripherals 16bit (R/W) */ -#define U300_SYSCON_CERR (0x0028) -#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) -#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) -#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) -#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) -#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) -#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100) -#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080) -#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040) -#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020) -#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010) -#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008) -#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004) -#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002) -#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) -/* Single block clock enable 16bit (-/W) */ -#define U300_SYSCON_SBCER (0x002c) -#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) -#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) -#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) -#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) -#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004) -#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003) -#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) -#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) -#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) -#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) -#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) -#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) -#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) -#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015) -#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014) -#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013) -#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) -#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) -#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) -#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) -#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) -#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) -#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) -#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) -#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028) -#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027) -#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026) -#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025) -#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024) -#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023) -#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022) -#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021) -#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020) -/* Single block clock disable 16bit (-/W) */ -#define U300_SYSCON_SBCDR (0x0030) -/* Same values as above for SBCER */ -/* Clock force SLOW peripherals 16bit (R/W) */ -#define U300_SYSCON_CFSR (0x003c) -#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) -#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) -#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) -#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) -#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010) -#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008) -#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004) -#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002) -#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001) -/* Clock force FAST peripherals 16bit (R/W) */ -#define U300_SYSCON_CFFR (0x40) -/* Values not defined. Define if you want to use them. */ -/* Clock force the rest of the peripherals 16bit (R/W) */ -#define U300_SYSCON_CFRR (0x44) -#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) -#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) -#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) -#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) -#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) -#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100) -#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080) -#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040) -#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020) -#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010) -#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008) -#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004) -#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002) -#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001) -/* PLL208 Frequency Control 16bit (R/W) */ -#define U300_SYSCON_PFCR (0x48) -#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F) -/* Power Management Control 16bit (R/W) */ -#define U300_SYSCON_PMCR (0x50) -#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) -#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) -/* - * All other clocking registers moved to clock.c! - */ -/* Reset Out 16bit (R/W) */ -#define U300_SYSCON_RCR (0x6c) -#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001) -/* EMIF Slew Rate Control 16bit (R/W) */ -#define U300_SYSCON_SRCLR (0x70) -#define U300_SYSCON_SRCLR_MASK (0x03FF) -#define U300_SYSCON_SRCLR_VALUE (0x03FF) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001) -/* EMIF Clock Control Register 16bit (R/W) */ -#define U300_SYSCON_ECCR (0x0078) -#define U300_SYSCON_ECCR_MASK (0x000F) -#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008) -#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) -#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) -#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) -/* Step one for killing the applications system 16bit (-/W) */ -#define U300_SYSCON_KA1R (0x0080) -#define U300_SYSCON_KA1R_MASK (0xFFFF) -#define U300_SYSCON_KA1R_VALUE (0xFFFF) -/* Step two for killing the application system 16bit (-/W) */ -#define U300_SYSCON_KA2R (0x0084) -#define U300_SYSCON_KA2R_MASK (0xFFFF) -#define U300_SYSCON_KA2R_VALUE (0xFFFF) -/* MMC/MSPRO frequency divider register 0 16bit (R/W) */ -#define U300_SYSCON_MMF0R (0x90) -#define U300_SYSCON_MMF0R_MASK (0x00FF) -#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0) -#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F) -/* MMC/MSPRO frequency divider register 1 16bit (R/W) */ -#define U300_SYSCON_MMF1R (0x94) -#define U300_SYSCON_MMF1R_MASK (0x00FF) -#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0) -#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F) -/* AAIF control register 16 bit (R/W) */ -#define U300_SYSCON_AAIFCR (0x98) -#define U300_SYSCON_AAIFCR_MASK (0x0003) -#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK (0x0003) -#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL (0x0000) -#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING (0x0001) -#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT (0x0002) -#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT (0x0003) -/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */ -#define U300_SYSCON_MMCR (0x9C) -#define U300_SYSCON_MMCR_MASK (0x0003) -#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) -#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) -/* Pull up/down control (R/W) */ -#define U300_SYSCON_PUCR (0x104) -#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE (0x0200) -#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE (0x0100) -#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080) -#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040) -#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F) -/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ -#define U300_SYSCON_S0CCR (0x120) -#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) -#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) -#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000) -#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) -#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) -#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) -#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001) -#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1) -#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1) -#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1) -#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1) -#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1) -#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1) -#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1) -#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1) -#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1) -/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */ -#define U300_SYSCON_S1CCR (0x124) -#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) -#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) -#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000) -#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) -#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) -#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) -#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001) -#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1) -#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1) -#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1) -#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1) -#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1) -#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1) -#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1) -#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1) -#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1) -/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */ -#define U300_SYSCON_S2CCR (0x128) -#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) -#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) -#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) -#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000) -#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) -#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) -#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) -#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001) -#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1) -#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1) -#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1) -#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1) -#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1) -#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1) -#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1) -#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1) -#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1) -/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */ -#define U300_SYSCON_MCR (0x12c) -#define U300_SYSCON_MCR_FIELD_MASK (0x00FF) -#define U300_SYSCON_MCR_PMGEN_CR_4_MASK (0x00C0) -#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO (0x0000) -#define U300_SYSCON_MCR_PMGEN_CR_4_SPI (0x0040) -#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF (0x00C0) -#define U300_SYSCON_MCR_PMGEN_CR_2_MASK (0x0030) -#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO (0x0000) -#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC (0x0010) -#define U300_SYSCON_MCR_PMGEN_CR_2_DSP (0x0020) -#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF (0x0030) -#define U300_SYSCON_MCR_PMGEN_CR_0_MASK (0x000C) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1 (0x0000) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2 (0x0004) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3 (0x0008) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C) -#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002) -#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001) -/* SC_PLL_IRQ_CONTROL 16bit (R/W) */ -#define U300_SYSCON_PICR (0x0130) -#define U300_SYSCON_PICR_MASK (0x00FF) -#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080) -#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040) -#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020) -#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010) -#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008) -#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004) -#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002) -#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001) -/* SC_PLL_IRQ_STATUS 16 bit (R/-) */ -#define U300_SYSCON_PISR (0x0134) -#define U300_SYSCON_PISR_MASK (0x000F) -#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008) -#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004) -#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002) -#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001) -/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */ -#define U300_SYSCON_PICLR (0x0138) -#define U300_SYSCON_PICLR_MASK (0x000F) -#define U300_SYSCON_PICLR_RWMASK (0x0000) -#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008) -#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004) -#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002) -#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001) -/* CAMIF_CONTROL 16 bit (-/W) */ -#define U300_SYSCON_CICR (0x013C) -#define U300_SYSCON_CICR_MASK (0x0FFF) -#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK (0x0F00) -#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1 (0x0C00) -#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0 (0x0300) -#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK (0x00F0) -#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1 (0x00C0) -#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0 (0x0030) -#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK (0x000F) -#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1 (0x000C) -#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0 (0x0003) -/* Clock activity observability register 0 */ -#define U300_SYSCON_C0OAR (0x140) -#define U300_SYSCON_C0OAR_MASK (0xFFFF) -#define U300_SYSCON_C0OAR_VALUE (0xFFFF) -#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000) -#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000) -#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000) -#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000) -#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800) -#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400) -#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200) -#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100) -#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080) -#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040) -#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020) -#define U300_SYSCON_C0OAR_APEX_CLK (0x0010) -#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008) -#define U300_SYSCON_C0OAR_AHB_CLK (0x0004) -#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002) -#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001) -/* Clock activity observability register 1 */ -#define U300_SYSCON_C1OAR (0x144) -#define U300_SYSCON_C1OAR_MASK (0x3FFE) -#define U300_SYSCON_C1OAR_VALUE (0x3FFE) -#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000) -#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000) -#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800) -#define U300_SYSCON_C1OAR_MMC_CLK (0x0400) -#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200) -#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100) -#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080) -#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040) -#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020) -#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010) -#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008) -#define U300_SYSCON_C1OAR_PPM_CLK (0x0004) -#define U300_SYSCON_C1OAR_DMA_CLK (0x0002) -/* Clock activity observability register 2 */ -#define U300_SYSCON_C2OAR (0x148) -#define U300_SYSCON_C2OAR_MASK (0x0FFF) -#define U300_SYSCON_C2OAR_VALUE (0x0FFF) -#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800) -#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400) -#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200) -#define U300_SYSCON_C2OAR_VC_CLK (0x0100) -#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080) -#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040) -#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020) -#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010) -#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008) -#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004) -#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002) -#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001) - -/* Chip ID register 16bit (R/-) */ -#define U300_SYSCON_CIDR (0x400) -/* Video IRQ clear 16bit (R/W) */ -#define U300_SYSCON_VICR (0x404) -#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE (0x0002) -#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE (0x0001) -/* SMCR */ -#define U300_SYSCON_SMCR (0x4d0) -#define U300_SYSCON_SMCR_FIELD_MASK (0x000e) -#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008) -#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004) -#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002) -/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */ -#define U300_SYSCON_CSDR (0x4f0) -#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001) -/* PRINT_CONTROL Print Control 16bit (R/-) */ -#define U300_SYSCON_PCR (0x4f8) -#define U300_SYSCON_PCR_SERV_IND (0x0001) -/* BOOT_CONTROL 16bit (R/-) */ -#define U300_SYSCON_BCR (0x4fc) -#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400) -#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200) -#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC) -#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003) - - -/* CPU clock defines */ -/** - * CPU high frequency in MHz - */ -#define SYSCON_CPU_CLOCK_HIGH 208 -/** - * CPU medium frequency in MHz - */ -#define SYSCON_CPU_CLOCK_MEDIUM 52 -/** - * CPU low frequency in MHz - */ -#define SYSCON_CPU_CLOCK_LOW 13 - -/* EMIF clock defines */ -/** - * EMIF high frequency in MHz - */ -#define SYSCON_EMIF_CLOCK_HIGH 104 -/** - * EMIF medium frequency in MHz - */ -#define SYSCON_EMIF_CLOCK_MEDIUM 52 -/** - * EMIF low frequency in MHz - */ -#define SYSCON_EMIF_CLOCK_LOW 13 - -/* AHB clock defines */ -/** - * AHB high frequency in MHz - */ -#define SYSCON_AHB_CLOCK_HIGH 52 -/** - * AHB medium frequency in MHz - */ -#define SYSCON_AHB_CLOCK_MEDIUM 26 -/** - * AHB low frequency in MHz - */ -#define SYSCON_AHB_CLOCK_LOW 7 /* i.e 13/2=6.5MHz */ - -enum syscon_busmaster { - SYSCON_BM_DMAC, - SYSCON_BM_XGAM, - SYSCON_BM_VIDEO_ENC -}; - -/* Selectr a resistor or a set of resistors */ -enum syscon_pull_up_down { - SYSCON_PU_KEY_IN_EN, - SYSCON_PU_EMIF_1_8_BIT_EN, - SYSCON_PU_EMIF_1_16_BIT_EN, - SYSCON_PU_EMIF_1_NFIF_READY_EN, - SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN, -}; - -/* - * Note that this array must match the order of the array "clk_reg" - * in syscon.c - */ -enum syscon_clk { - SYSCON_CLKCONTROL_SLOW_BRIDGE, - SYSCON_CLKCONTROL_UART, - SYSCON_CLKCONTROL_BTR, - SYSCON_CLKCONTROL_EH, - SYSCON_CLKCONTROL_GPIO, - SYSCON_CLKCONTROL_KEYPAD, - SYSCON_CLKCONTROL_APP_TIMER, - SYSCON_CLKCONTROL_ACC_TIMER, - SYSCON_CLKCONTROL_FAST_BRIDGE, - SYSCON_CLKCONTROL_I2C0, - SYSCON_CLKCONTROL_I2C1, - SYSCON_CLKCONTROL_I2S0, - SYSCON_CLKCONTROL_I2S1, - SYSCON_CLKCONTROL_MMC, - SYSCON_CLKCONTROL_SPI, - SYSCON_CLKCONTROL_I2S0_CORE, - SYSCON_CLKCONTROL_I2S1_CORE, - SYSCON_CLKCONTROL_UART1, - SYSCON_CLKCONTROL_AAIF, - SYSCON_CLKCONTROL_AHB, - SYSCON_CLKCONTROL_APEX, - SYSCON_CLKCONTROL_CPU, - SYSCON_CLKCONTROL_DMA, - SYSCON_CLKCONTROL_EMIF, - SYSCON_CLKCONTROL_NAND_IF, - SYSCON_CLKCONTROL_VIDEO_ENC, - SYSCON_CLKCONTROL_XGAM, - SYSCON_CLKCONTROL_SEMI, - SYSCON_CLKCONTROL_AHB_SUBSYS, - SYSCON_CLKCONTROL_MSPRO -}; - -enum syscon_sysclk_mode { - SYSCON_SYSCLK_DISABLED, - SYSCON_SYSCLK_M_CLK, - SYSCON_SYSCLK_ACC_FSM, - SYSCON_SYSCLK_PLL60_48, - SYSCON_SYSCLK_PLL60_60, - SYSCON_SYSCLK_ACC_PLL208, - SYSCON_SYSCLK_APP_PLL13, - SYSCON_SYSCLK_APP_FSM, - SYSCON_SYSCLK_RTC, - SYSCON_SYSCLK_APP_PLL208 -}; - -enum syscon_sysclk_req { - SYSCON_SYSCLKREQ_DISABLED, - SYSCON_SYSCLKREQ_ACTIVE_LOW, - SYSCON_SYSCLKREQ_MONITOR -}; - -enum syscon_clk_mode { - SYSCON_CLKMODE_OFF, - SYSCON_CLKMODE_DEFAULT, - SYSCON_CLKMODE_LOW, - SYSCON_CLKMODE_MEDIUM, - SYSCON_CLKMODE_HIGH, - SYSCON_CLKMODE_PERMANENT, - SYSCON_CLKMODE_ON, -}; - -enum syscon_call_mode { - SYSCON_CLKCALL_NOWAIT, - SYSCON_CLKCALL_WAIT, -}; - -int syscon_dc_on(bool keep_power_on); -int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster, - bool active); -bool syscon_get_busmaster_active_state(void); -int syscon_set_sleep_mask(enum syscon_clk, - bool sleep_ctrl); -int syscon_config_sysclk(u32 sysclk, - enum syscon_sysclk_mode sysclkmode, - bool inverse, - u32 divisor, - enum syscon_sysclk_req sysclkreq); -bool syscon_can_turn_off_semi_clock(void); - -/* This function is restricted to core.c */ -int syscon_request_normal_power(bool req); - -/* This function is restricted to be used by platform_speed.c */ -int syscon_speed_request(enum syscon_call_mode wait_mode, - enum syscon_clk_mode req_clk_mode); -#endif /* __MACH_SYSCON_H */ diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h deleted file mode 100644 index f233b72633f..00000000000 --- a/arch/arm/mach-u300/include/mach/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/timex.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Platform tick rate definition. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#ifndef __MACH_TIMEX_H -#define __MACH_TIMEX_H - -/* This is for the APP OS GP1 (General Purpose 1) timer */ -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h deleted file mode 100644 index 0320495efc4..00000000000 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/u300-regs.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Basic register address definitions in physical memory and - * some block definitions for core devices like the timer. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_REGS_H -#define __MACH_U300_REGS_H - -/* - * These are the large blocks of memory allocated for I/O. - * the defines are used for setting up the I/O memory mapping. - */ - -/* NAND Flash CS0 */ -#define U300_NAND_CS0_PHYS_BASE 0x80000000 - -/* NFIF */ -#define U300_NAND_IF_PHYS_BASE 0x9f800000 - -/* ALE, CLE offset for FSMC NAND */ -#define PLAT_NAND_CLE (1 << 16) -#define PLAT_NAND_ALE (1 << 17) - -/* AHB Peripherals */ -#define U300_AHB_PER_PHYS_BASE 0xa0000000 -#define U300_AHB_PER_VIRT_BASE 0xff010000 - -/* FAST Peripherals */ -#define U300_FAST_PER_PHYS_BASE 0xc0000000 -#define U300_FAST_PER_VIRT_BASE 0xff020000 - -/* SLOW Peripherals */ -#define U300_SLOW_PER_PHYS_BASE 0xc0010000 -#define U300_SLOW_PER_VIRT_BASE 0xff000000 - -/* Boot ROM */ -#define U300_BOOTROM_PHYS_BASE 0xffff0000 -#define U300_BOOTROM_VIRT_BASE 0xffff0000 - -/* SEMI config base */ -#define U300_SEMI_CONFIG_BASE 0x2FFE0000 - -/* - * AHB peripherals - */ - -/* AHB Peripherals Bridge Controller */ -#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000) - -/* Vectored Interrupt Controller 0, servicing 32 interrupts */ -#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) -#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000) - -/* Vectored Interrupt Controller 1, servicing 32 interrupts */ -#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) -#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000) - -/* Memory Stick Pro (MSPRO) controller */ -#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) - -/* EMIF Configuration Area */ -#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000) - - -/* - * FAST peripherals - */ - -/* FAST bridge control */ -#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000) - -/* MMC/SD controller */ -#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000) - -/* PCM I2S0 controller */ -#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000) - -/* PCM I2S1 controller */ -#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000) - -/* I2C0 controller */ -#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000) - -/* I2C1 controller */ -#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000) - -/* SPI controller */ -#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) - -/* Fast UART1 on U335 only */ -#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000) - -/* - * SLOW peripherals - */ - -/* SLOW bridge control */ -#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE) - -/* SYSCON */ -#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) -#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000) - -/* Watchdog */ -#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) - -/* UART0 */ -#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000) - -/* APP side special timer */ -#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) -#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000) - -/* Keypad */ -#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) - -/* GPIO */ -#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000) - -/* RTC */ -#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) - -/* Bus tracer */ -#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000) - -/* Event handler (hardware queue) */ -#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000) - -/* Genric Timer */ -#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000) - -/* PPM */ -#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000) - - -/* - * REST peripherals - */ - -/* ISP (image signal processor) */ -#define U300_ISP_BASE (0xA0008000) - -/* DMA Controller base */ -#define U300_DMAC_BASE (0xC0020000) - -/* MSL Base */ -#define U300_MSL_BASE (0xc0022000) - -/* APEX Base */ -#define U300_APEX_BASE (0xc0030000) - -/* Video Encoder Base */ -#define U300_VIDEOENC_BASE (0xc0080000) - -/* XGAM Base */ -#define U300_XGAM_BASE (0xd0000000) - -#endif diff --git a/arch/arm/mach-u300/include/mach/uncompress.h b/arch/arm/mach-u300/include/mach/uncompress.h deleted file mode 100644 index 783e7e60101..00000000000 --- a/arch/arm/mach-u300/include/mach/uncompress.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/arm/mach-u300/include/mach/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define AMBA_UART_DR (*(volatile unsigned char *)0xc0013000) -#define AMBA_UART_LCRH (*(volatile unsigned char *)0xc001302C) -#define AMBA_UART_CR (*(volatile unsigned char *)0xc0013030) -#define AMBA_UART_FR (*(volatile unsigned char *)0xc0013018) - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = c; -} - -static inline void flush(void) -{ - while (AMBA_UART_FR & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c index 9c53f01c62e..bf40cd478fe 100644 --- a/arch/arm/mach-u300/regulator.c +++ b/arch/arm/mach-u300/regulator.c @@ -10,11 +10,18 @@ #include <linux/device.h> #include <linux/signal.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/machine.h> #include <linux/regulator/consumer.h> -/* Those are just for writing in syscon */ -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/syscon.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> + +/* Power Management Control 16bit (R/W) */ +#define U300_SYSCON_PMCR (0x50) +#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) +#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) /* * Regulators that power the board and chip and which are @@ -47,13 +54,28 @@ void u300_pm_poweroff(void) /* * Hog the regulators needed to power up the board. */ -static int __init u300_init_boardpower(void) +static int __init __u300_init_boardpower(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; + struct device_node *syscon_np; + struct regmap *regmap; int err; - u32 val; pr_info("U300: setting up board power\n"); - main_power_15 = regulator_get(NULL, "vana15"); + + syscon_np = of_parse_phandle(np, "syscon", 0); + if (!syscon_np) { + pr_crit("U300: no syscon node\n"); + return -ENODEV; + } + regmap = syscon_node_to_regmap(syscon_np); + if (!regmap) { + pr_crit("U300: could not locate syscon regmap\n"); + return -ENODEV; + } + + main_power_15 = regulator_get(&pdev->dev, "vana15"); + if (IS_ERR(main_power_15)) { pr_err("could not get vana15"); return PTR_ERR(main_power_15); @@ -72,9 +94,8 @@ static int __init u300_init_boardpower(void) * the rest of the U300 power management is implemented. */ pr_info("U300: disable system controller pull-up\n"); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); - val &= ~U300_SYSCON_PMCR_DCON_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); + regmap_update_bits(regmap, U300_SYSCON_PMCR, + U300_SYSCON_PMCR_DCON_ENABLE, 0); /* Register globally exported PM poweroff hook */ pm_power_off = u300_pm_poweroff; @@ -82,7 +103,31 @@ static int __init u300_init_boardpower(void) return 0; } +static int __init s365_board_probe(struct platform_device *pdev) +{ + return __u300_init_boardpower(pdev); +} + +static const struct of_device_id s365_board_match[] = { + { .compatible = "stericsson,s365" }, + {}, +}; + +static struct platform_driver s365_board_driver = { + .driver = { + .name = "s365-board", + .owner = THIS_MODULE, + .of_match_table = s365_board_match, + }, +}; + /* * So at module init time we hog the regulator! */ -module_init(u300_init_boardpower); +static int __init u300_init_boardpower(void) +{ + return platform_driver_probe(&s365_board_driver, + s365_board_probe); +} + +device_initcall(u300_init_boardpower); diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c deleted file mode 100644 index 910698293d6..00000000000 --- a/arch/arm/mach-u300/spi.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * arch/arm/mach-u300/spi.c - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/spi/spi.h> -#include <linux/amba/pl022.h> -#include <linux/platform_data/dma-coh901318.h> -#include <linux/err.h> - -/* - * The following is for the actual devices on the SSP/SPI bus - */ -#ifdef CONFIG_MACH_U300_SPIDUMMY -static void select_dummy_chip(u32 chipselect) -{ - pr_debug("CORE: %s called with CS=0x%x (%s)\n", - __func__, - chipselect, - chipselect ? "unselect chip" : "select chip"); - /* - * Here you would write the chip select value to the GPIO pins if - * this was a real chip (but this is a loopback dummy). - */ -} - -struct pl022_config_chip dummy_chip_info = { - /* available POLLING_TRANSFER, INTERRUPT_TRANSFER, DMA_TRANSFER */ - .com_mode = DMA_TRANSFER, - .iface = SSP_INTERFACE_MOTOROLA_SPI, - /* We can only act as master but SSP_SLAVE is possible in theory */ - .hierarchy = SSP_MASTER, - /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ - .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, - .ctrl_len = SSP_BITS_12, - .wait_state = SSP_MWIRE_WAIT_ZERO, - .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, - /* - * This is where you insert a call to a function to enable CS - * (usually GPIO) for a certain chip. - */ - .cs_control = select_dummy_chip, -}; -#endif - -static struct spi_board_info u300_spi_devices[] = { -#ifdef CONFIG_MACH_U300_SPIDUMMY - { - /* A dummy chip used for loopback tests */ - .modalias = "spi-dummy", - /* Really dummy, pass in additional chip config here */ - .platform_data = NULL, - /* This defines how the controller shall handle the device */ - .controller_data = &dummy_chip_info, - /* .irq - no external IRQ routed from this device */ - .max_speed_hz = 1000000, - .bus_num = 0, /* Only one bus on this chip */ - .chip_select = 0, - /* Means SPI_CS_HIGH, change if e.g low CS */ - .mode = SPI_MODE_1 | SPI_LOOP, - }, -#endif -}; - -static struct pl022_ssp_controller ssp_platform_data = { - /* If you have several SPI buses this varies, we have only bus 0 */ - .bus_id = 0, - /* - * On the APP CPU GPIO 4, 5 and 6 are connected as generic - * chip selects for SPI. (Same on U330, U335 and U365.) - * TODO: make sure the GPIO driver can select these properly - * and do padmuxing accordingly too. - */ - .num_chipselect = 3, -#ifdef CONFIG_COH901318 - .enable_dma = 1, - .dma_filter = coh901318_filter_id, - .dma_rx_param = (void *) U300_DMA_SPI_RX, - .dma_tx_param = (void *) U300_DMA_SPI_TX, -#else - .enable_dma = 0, -#endif -}; - - -void __init u300_spi_init(struct amba_device *adev) -{ - adev->dev.platform_data = &ssp_platform_data; -} - -void __init u300_spi_register_board_devices(void) -{ - /* Register any SPI devices */ - spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices)); -} diff --git a/arch/arm/mach-u300/spi.h b/arch/arm/mach-u300/spi.h deleted file mode 100644 index bd3d867e240..00000000000 --- a/arch/arm/mach-u300/spi.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-u300/spi.h - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#ifndef SPI_H -#define SPI_H -#include <linux/amba/bus.h> - -#ifdef CONFIG_SPI_PL022 -void __init u300_spi_init(struct amba_device *adev); -void __init u300_spi_register_board_devices(void); -#else -/* Compile out SPI support if PL022 is not selected */ -static inline void __init u300_spi_init(struct amba_device *adev) -{ -} -static inline void __init u300_spi_register_board_devices(void) -{ -} -#endif - -#endif diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index d9e73209c9b..390ae5feb1d 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -18,17 +18,15 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/irq.h> - -#include <mach/hardware.h> -#include <mach/irqs.h> +#include <linux/delay.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> /* Generic stuff */ #include <asm/sched_clock.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include "timer.h" - /* * APP side special timer registers * This timer contains four timers which can fire an interrupt each. @@ -189,6 +187,8 @@ #define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) #define US_PER_TICK ((1000000 + (HZ/2)) / HZ) +static void __iomem *u300_timer_base; + /* * The u300_set_mode() function is always called first, if we * have oneshot timer active, the oneshot scheduling function @@ -201,28 +201,28 @@ static void u300_set_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_PERIODIC: /* Disable interrupts on GPT1 */ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Disable GP1 while we're reprogramming it. */ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + u300_timer_base + U300_TIMER_APP_DGPT1); /* * Set the periodic mode to a certain number of ticks per * jiffy. */ writel(TICKS_PER_JIFFY, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + u300_timer_base + U300_TIMER_APP_GPT1TC); /* * Set continuous mode, so the timer keeps triggering * interrupts. */ writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + u300_timer_base + U300_TIMER_APP_SGPT1M); /* Enable timer interrupts */ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Then enable the OS timer again */ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + u300_timer_base + U300_TIMER_APP_EGPT1); break; case CLOCK_EVT_MODE_ONESHOT: /* Just break; here? */ @@ -233,33 +233,33 @@ static void u300_set_mode(enum clock_event_mode mode, */ /* Disable interrupts on GPT1 */ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Disable GP1 while we're reprogramming it. */ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + u300_timer_base + U300_TIMER_APP_DGPT1); /* * Expire far in the future, u300_set_next_event() will be * called soon... */ - writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC); /* We run one shot per tick here! */ writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + u300_timer_base + U300_TIMER_APP_SGPT1M); /* Enable interrupts for this timer */ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Enable timer */ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + u300_timer_base + U300_TIMER_APP_EGPT1); break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: /* Disable interrupts on GP1 */ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Disable GP1 */ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + u300_timer_base + U300_TIMER_APP_DGPT1); break; case CLOCK_EVT_MODE_RESUME: /* Ignore this call */ @@ -281,27 +281,27 @@ static int u300_set_next_event(unsigned long cycles, { /* Disable interrupts on GPT1 */ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Disable GP1 while we're reprogramming it. */ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + u300_timer_base + U300_TIMER_APP_DGPT1); /* Reset the General Purpose timer 1. */ writel(U300_TIMER_APP_RGPT1_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1); + u300_timer_base + U300_TIMER_APP_RGPT1); /* IRQ in n * cycles */ - writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC); /* * We run one shot per tick here! (This is necessary to reconfigure, * the timer will tilt if you don't!) */ writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + u300_timer_base + U300_TIMER_APP_SGPT1M); /* Enable timer interrupts */ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Then enable the OS timer again */ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + u300_timer_base + U300_TIMER_APP_EGPT1); return 0; } @@ -320,8 +320,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_u300_1mhz; /* ACK/Clear timer IRQ for the APP GPT1 Timer */ + writel(U300_TIMER_APP_GPT1IA_IRQ_ACK, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA); + u300_timer_base + U300_TIMER_APP_GPT1IA); evt->event_handler(evt); return IRQ_HANDLED; } @@ -342,65 +343,88 @@ static struct irqaction u300_timer_irq = { static u32 notrace u300_read_sched_clock(void) { - return readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); + return readl(u300_timer_base + U300_TIMER_APP_GPT2CC); +} + +static unsigned long u300_read_current_timer(void) +{ + return readl(u300_timer_base + U300_TIMER_APP_GPT2CC); } +static struct delay_timer u300_delay_timer; /* * This sets up the system timers, clock source and clock event. */ -void __init u300_timer_init(void) +static void __init u300_timer_init_of(struct device_node *np) { + struct resource irq_res; + int irq; struct clk *clk; unsigned long rate; + u300_timer_base = of_iomap(np, 0); + if (!u300_timer_base) + panic("could not ioremap system timer\n"); + + /* Get the IRQ for the GP1 timer */ + irq = of_irq_to_resource(np, 2, &irq_res); + if (irq <= 0) + panic("no IRQ for system timer\n"); + + pr_info("U300 GP1 timer @ base: %p, IRQ: %d\n", u300_timer_base, irq); + /* Clock the interrupt controller */ - clk = clk_get_sys("apptimer", NULL); + clk = of_clk_get(np, 0); BUG_ON(IS_ERR(clk)); clk_prepare_enable(clk); rate = clk_get_rate(clk); setup_sched_clock(u300_read_sched_clock, 32, rate); + u300_delay_timer.read_current_timer = &u300_read_current_timer; + u300_delay_timer.freq = rate; + register_current_timer_delay(&u300_delay_timer); + /* * Disable the "OS" and "DD" timers - these are designed for Symbian! * Example usage in cnh1601578 cpu subsystem pd_timer_app.c */ writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC); + u300_timer_base + U300_TIMER_APP_CRC); writel(U300_TIMER_APP_ROST_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST); + u300_timer_base + U300_TIMER_APP_ROST); writel(U300_TIMER_APP_DOST_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST); + u300_timer_base + U300_TIMER_APP_DOST); writel(U300_TIMER_APP_RDDT_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT); + u300_timer_base + U300_TIMER_APP_RDDT); writel(U300_TIMER_APP_DDDT_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT); + u300_timer_base + U300_TIMER_APP_DDDT); /* Reset the General Purpose timer 1. */ writel(U300_TIMER_APP_RGPT1_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1); + u300_timer_base + U300_TIMER_APP_RGPT1); /* Set up the IRQ handler */ - setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq); + setup_irq(irq, &u300_timer_irq); /* Reset the General Purpose timer 2 */ writel(U300_TIMER_APP_RGPT2_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2); + u300_timer_base + U300_TIMER_APP_RGPT2); /* Set this timer to run around forever */ - writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC); + writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC); /* Set continuous mode so it wraps around */ writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M); + u300_timer_base + U300_TIMER_APP_SGPT2M); /* Disable timer interrupts */ writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE); + u300_timer_base + U300_TIMER_APP_GPT2IE); /* Then enable the GP2 timer to use as a free running us counter */ writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2); + u300_timer_base + U300_TIMER_APP_EGPT2); /* Use general purpose timer 2 as clock source */ - if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC, + if (clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC, "GPT2", rate, 300, 32, clocksource_mmio_readl_up)) pr_err("timer: failed to initialize U300 clock source\n"); @@ -413,3 +437,6 @@ void __init u300_timer_init(void) * used by hrtimers! */ } + +CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer", + u300_timer_init_of); diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h deleted file mode 100644 index d34287bc34f..00000000000 --- a/arch/arm/mach-u300/timer.h +++ /dev/null @@ -1 +0,0 @@ -extern void u300_timer_init(void); diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h deleted file mode 100644 index 83f50772e16..00000000000 --- a/arch/arm/mach-u300/u300-gpio.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Individual pin assignments for the B335/S335. - * Notice that the actual usage of these pins depends on the - * PAD MUX settings, that is why the same number can potentially - * appear several times. In the reference design each pin is only - * used for one purpose. These were determined by inspecting the - * S365 schematic. - */ -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_UART_CTS 2 -#define U300_GPIO_PIN_UART_RTS 3 -#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ -#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ -#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ -#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ - -#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ -#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ -#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ -#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ -#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ -#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ -#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ -#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ -#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ -#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ -#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ -#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ -#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ -#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ -#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ -#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ -#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ -#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ -#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ -#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ -#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ -#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ -#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ -#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ -#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ -#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ -#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ -#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ -#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ -#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ -#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ -#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ -#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ -#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ -#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 5907e10c37f..b8bbabec631 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -57,4 +57,13 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" +config ARCH_VEXPRESS_DCSCB + bool "Dual Cluster System Control Block (DCSCB) support" + depends on MCPM + select ARM_CCI + help + Support for the Dual Cluster System Configuration Block (DCSCB). + This is needed to provide CPU and cluster power management + on RTSM implementing big.LITTLE. + endmenu diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 42703e8b4d3..48ba89a8149 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -6,5 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o +obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index f134cd4a85f..bde4374ab6d 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -6,6 +6,8 @@ void vexpress_dt_smp_map_io(void); +bool vexpress_smp_init_ops(void); + extern struct smp_operations vexpress_smp_ops; extern void vexpress_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c new file mode 100644 index 00000000000..16d57a8a9d5 --- /dev/null +++ b/arch/arm/mach-vexpress/dcscb.c @@ -0,0 +1,253 @@ +/* + * arch/arm/mach-vexpress/dcscb.c - Dual Cluster System Configuration Block + * + * Created by: Nicolas Pitre, May 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/of_address.h> +#include <linux/vexpress.h> +#include <linux/arm-cci.h> + +#include <asm/mcpm.h> +#include <asm/proc-fns.h> +#include <asm/cacheflush.h> +#include <asm/cputype.h> +#include <asm/cp15.h> + + +#define RST_HOLD0 0x0 +#define RST_HOLD1 0x4 +#define SYS_SWRESET 0x8 +#define RST_STAT0 0xc +#define RST_STAT1 0x10 +#define EAG_CFG_R 0x20 +#define EAG_CFG_W 0x24 +#define KFC_CFG_R 0x28 +#define KFC_CFG_W 0x2c +#define DCS_CFG_R 0x30 + +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() while its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t dcscb_lock = __ARCH_SPIN_LOCK_UNLOCKED; + +static void __iomem *dcscb_base; +static int dcscb_use_count[4][2]; +static int dcscb_allcpus_mask[2]; + +static int dcscb_power_up(unsigned int cpu, unsigned int cluster) +{ + unsigned int rst_hold, cpumask = (1 << cpu); + unsigned int all_mask = dcscb_allcpus_mask[cluster]; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cpu >= 4 || cluster >= 2) + return -EINVAL; + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&dcscb_lock); + + dcscb_use_count[cpu][cluster]++; + if (dcscb_use_count[cpu][cluster] == 1) { + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + if (rst_hold & (1 << 8)) { + /* remove cluster reset and add individual CPU's reset */ + rst_hold &= ~(1 << 8); + rst_hold |= all_mask; + } + rst_hold &= ~(cpumask | (cpumask << 4)); + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); + } else if (dcscb_use_count[cpu][cluster] != 2) { + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG(); + } + + arch_spin_unlock(&dcscb_lock); + local_irq_enable(); + + return 0; +} + +static void dcscb_power_down(void) +{ + unsigned int mpidr, cpu, cluster, rst_hold, cpumask, all_mask; + bool last_man = false, skip_wfi = false; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + cpumask = (1 << cpu); + all_mask = dcscb_allcpus_mask[cluster]; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= 4 || cluster >= 2); + + __mcpm_cpu_going_down(cpu, cluster); + + arch_spin_lock(&dcscb_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + dcscb_use_count[cpu][cluster]--; + if (dcscb_use_count[cpu][cluster] == 0) { + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold |= cpumask; + if (((rst_hold | (rst_hold >> 4)) & all_mask) == all_mask) { + rst_hold |= (1 << 8); + last_man = true; + } + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); + } else if (dcscb_use_count[cpu][cluster] == 1) { + /* + * A power_up request went ahead of us. + * Even if we do not want to shut this CPU down, + * the caller expects a certain state as if the WFI + * was aborted. So let's continue with cache cleaning. + */ + skip_wfi = true; + } else + BUG(); + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + arch_spin_unlock(&dcscb_lock); + + /* + * Flush all cache levels for this cluster. + * + * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need + * a preliminary flush here for those CPUs. At least, that's + * the theory -- without the extra flush, Linux explodes on + * RTSM (to be investigated). + */ + flush_cache_all(); + set_cr(get_cr() & ~CR_C); + flush_cache_all(); + + /* + * This is a harmless no-op. On platforms with a real + * outer cache this might either be needed or not, + * depending on where the outer cache sits. + */ + outer_flush_all(); + + /* Disable local coherency by clearing the ACTLR "SMP" bit: */ + set_auxcr(get_auxcr() & ~(1 << 6)); + + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(mpidr); + + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + arch_spin_unlock(&dcscb_lock); + + /* + * Flush the local CPU cache. + * + * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need + * a preliminary flush here for those CPUs. At least, that's + * the theory -- without the extra flush, Linux explodes on + * RTSM (to be investigated). + */ + flush_cache_louis(); + set_cr(get_cr() & ~CR_C); + flush_cache_louis(); + + /* Disable local coherency by clearing the ACTLR "SMP" bit: */ + set_auxcr(get_auxcr() & ~(1 << 6)); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + dsb(); + if (!skip_wfi) + wfi(); + + /* Not dead at this point? Let our caller cope. */ +} + +static const struct mcpm_platform_ops dcscb_power_ops = { + .power_up = dcscb_power_up, + .power_down = dcscb_power_down, +}; + +static void __init dcscb_usage_count_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= 4 || cluster >= 2); + dcscb_use_count[cpu][cluster] = 1; +} + +extern void dcscb_power_up_setup(unsigned int affinity_level); + +static int __init dcscb_init(void) +{ + struct device_node *node; + unsigned int cfg; + int ret; + + if (!cci_probed()) + return -ENODEV; + + node = of_find_compatible_node(NULL, NULL, "arm,rtsm,dcscb"); + if (!node) + return -ENODEV; + dcscb_base = of_iomap(node, 0); + if (!dcscb_base) + return -EADDRNOTAVAIL; + cfg = readl_relaxed(dcscb_base + DCS_CFG_R); + dcscb_allcpus_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1; + dcscb_allcpus_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1; + dcscb_usage_count_init(); + + ret = mcpm_platform_register(&dcscb_power_ops); + if (!ret) + ret = mcpm_sync_init(dcscb_power_up_setup); + if (ret) { + iounmap(dcscb_base); + return ret; + } + + pr_info("VExpress DCSCB support installed\n"); + + /* + * Future entries into the kernel can now go + * through the cluster entry vectors. + */ + vexpress_flags_set(virt_to_phys(mcpm_entry_point)); + + return 0; +} + +early_initcall(dcscb_init); diff --git a/arch/arm/mach-vexpress/dcscb_setup.S b/arch/arm/mach-vexpress/dcscb_setup.S new file mode 100644 index 00000000000..4bb7fbe0f62 --- /dev/null +++ b/arch/arm/mach-vexpress/dcscb_setup.S @@ -0,0 +1,38 @@ +/* + * arch/arm/include/asm/dcscb_setup.S + * + * Created by: Dave Martin, 2012-06-22 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + + +ENTRY(dcscb_power_up_setup) + + cmp r0, #0 @ check affinity level + beq 2f + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + * The ACTLR SMP bit does not need to be set here, because cpu_resume() + * already restores that. + * + * A15/A7 may not require explicit L2 invalidation on reset, dependent + * on hardware integration decisions. + * For now, this code assumes that L2 is either already invalidated, + * or invalidation is not required. + */ + + b cci_enable_port_for_self + +2: @ Implementation-specific local CPU setup operations should go here, + @ if any. In this case, there is nothing to do. + + bx lr + +ENDPROC(dcscb_power_up_setup) diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index dc1ace55d55..993c9ae5dc5 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -12,9 +12,11 @@ #include <linux/errno.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/of_fdt.h> #include <linux/vexpress.h> +#include <asm/mcpm.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -203,3 +205,21 @@ struct smp_operations __initdata vexpress_smp_ops = { .cpu_die = vexpress_cpu_die, #endif }; + +bool __init vexpress_smp_init_ops(void) +{ +#ifdef CONFIG_MCPM + /* + * The best way to detect a multi-cluster configuration at the moment + * is to look for the presence of a CCI in the system. + * Override the default vexpress_smp_ops if so. + */ + struct device_node *node; + node = of_find_compatible_node(NULL, NULL, "arm,cci-400"); + if (node && of_device_is_available(node)) { + mcpm_smp_set_ops(); + return true; + } +#endif + return false; +} diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index d6016970e2f..95a469e23e3 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -455,6 +455,7 @@ static const char * const v2m_dt_match[] __initconst = { DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .dt_compat = v2m_dt_match, .smp = smp_ops(vexpress_smp_ops), + .smp_init = smp_init_ops(vexpress_smp_init_ops), .map_io = v2m_dt_map_io, .init_early = v2m_dt_init_early, .init_time = v2m_dt_timer_init, diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile index 042afc1f8c4..7ddbfa60227 100644 --- a/arch/arm/mach-virt/Makefile +++ b/arch/arm/mach-virt/Makefile @@ -3,4 +3,3 @@ # obj-y := virt.o -obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-virt/platsmp.c b/arch/arm/mach-virt/platsmp.c deleted file mode 100644 index f4143f5bfa5..00000000000 --- a/arch/arm/mach-virt/platsmp.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Dummy Virtual Machine - does what it says on the tin. - * - * Copyright (C) 2012 ARM Ltd - * Author: Will Deacon <will.deacon@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/of.h> - -#include <asm/psci.h> -#include <asm/smp_plat.h> - -extern void secondary_startup(void); - -static void __init virt_smp_init_cpus(void) -{ -} - -static void __init virt_smp_prepare_cpus(unsigned int max_cpus) -{ -} - -static int __cpuinit virt_boot_secondary(unsigned int cpu, - struct task_struct *idle) -{ - if (psci_ops.cpu_on) - return psci_ops.cpu_on(cpu_logical_map(cpu), - __pa(secondary_startup)); - return -ENODEV; -} - -struct smp_operations __initdata virt_smp_ops = { - .smp_init_cpus = virt_smp_init_cpus, - .smp_prepare_cpus = virt_smp_prepare_cpus, - .smp_boot_secondary = virt_boot_secondary, -}; diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c index bdf05f41ca9..b184e57d185 100644 --- a/arch/arm/mach-virt/virt.c +++ b/arch/arm/mach-virt/virt.c @@ -35,10 +35,7 @@ static const char *virt_dt_match[] = { NULL }; -extern struct smp_operations virt_smp_ops; - DT_MACHINE_START(VIRT, "Dummy Virtual Machine") .init_machine = virt_init, - .smp = smp_ops(virt_smp_ops), .dt_compat = virt_dt_match, MACHINE_END diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index c70969b9c25..50d008d8f87 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -117,7 +117,7 @@ int __init zynq_slcr_init(void) pr_info("%s mapped to %p\n", np->name, zynq_slcr_base); - xilinx_zynq_clocks_init(zynq_slcr_base); + zynq_clock_init(zynq_slcr_base); of_node_put(np); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 35955b54944..9e8101ecd63 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -397,6 +397,15 @@ config CPU_V7 select CPU_PABRT_V7 select CPU_TLB_V7 if MMU +# ARMv7M +config CPU_V7M + bool + select CPU_32v7M + select CPU_ABRT_NOMMU + select CPU_CACHE_NOP + select CPU_PABRT_LEGACY + select CPU_THUMBONLY + config CPU_THUMBONLY bool # There are no CPUs available with MMU that don't implement an ARM ISA: @@ -441,6 +450,9 @@ config CPU_32v6K config CPU_32v7 bool +config CPU_32v7M + bool + # The abort model config CPU_ABRT_NOMMU bool @@ -491,6 +503,9 @@ config CPU_CACHE_V6 config CPU_CACHE_V7 bool +config CPU_CACHE_NOP + bool + config CPU_CACHE_VIVT bool @@ -613,7 +628,11 @@ config ARCH_DMA_ADDR_T_64BIT config ARM_THUMB bool "Support Thumb user binaries" if !CPU_THUMBONLY - depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON + depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || \ + CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || \ + CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ + CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || \ + CPU_V7 || CPU_FEROCEON || CPU_V7M default y help Say Y if you want to include kernel support for running user space diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 9e51be96f63..ee558a01f39 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o +obj-$(CONFIG_CPU_CACHE_NOP) += cache-nop.o AFLAGS_cache-v6.o :=-Wa,-march=armv6 AFLAGS_cache-v7.o :=-Wa,-march=armv7-a @@ -87,6 +88,7 @@ obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o obj-$(CONFIG_CPU_V6) += proc-v6.o obj-$(CONFIG_CPU_V6K) += proc-v6.o obj-$(CONFIG_CPU_V7) += proc-v7.o +obj-$(CONFIG_CPU_V7M) += proc-v7m.o AFLAGS_proc-v6.o :=-Wa,-march=armv6 AFLAGS_proc-v7.o :=-Wa,-march=armv7-a diff --git a/arch/arm/mm/cache-nop.S b/arch/arm/mm/cache-nop.S new file mode 100644 index 00000000000..8e12ddca003 --- /dev/null +++ b/arch/arm/mm/cache-nop.S @@ -0,0 +1,50 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + +#include "proc-macros.S" + +ENTRY(nop_flush_icache_all) + mov pc, lr +ENDPROC(nop_flush_icache_all) + + .globl nop_flush_kern_cache_all + .equ nop_flush_kern_cache_all, nop_flush_icache_all + + .globl nop_flush_kern_cache_louis + .equ nop_flush_kern_cache_louis, nop_flush_icache_all + + .globl nop_flush_user_cache_all + .equ nop_flush_user_cache_all, nop_flush_icache_all + + .globl nop_flush_user_cache_range + .equ nop_flush_user_cache_range, nop_flush_icache_all + + .globl nop_coherent_kern_range + .equ nop_coherent_kern_range, nop_flush_icache_all + +ENTRY(nop_coherent_user_range) + mov r0, 0 + mov pc, lr +ENDPROC(nop_coherent_user_range) + + .globl nop_flush_kern_dcache_area + .equ nop_flush_kern_dcache_area, nop_flush_icache_all + + .globl nop_dma_flush_range + .equ nop_dma_flush_range, nop_flush_icache_all + + .globl nop_dma_map_area + .equ nop_dma_map_area, nop_flush_icache_all + + .globl nop_dma_unmap_area + .equ nop_dma_unmap_area, nop_flush_icache_all + + __INITDATA + + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions nop diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index eb5293a69a8..5a3aba614a4 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -20,12 +20,19 @@ void __init arm_mm_memblock_reserve(void) { +#ifndef CONFIG_CPU_V7M /* * Register the exception vector page. * some architectures which the DRAM is the exception vector to trap, * alloc_page breaks with error, although it is not NULL, but "0." */ memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE); +#else /* ifndef CONFIG_CPU_V7M */ + /* + * There is no dedicated vector page on V7-M. So nothing needs to be + * reserved here. + */ +#endif } void __init sanity_check_meminfo(void) diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S new file mode 100644 index 00000000000..0c93588fcb9 --- /dev/null +++ b/arch/arm/mm/proc-v7m.S @@ -0,0 +1,157 @@ +/* + * linux/arch/arm/mm/proc-v7m.S + * + * Copyright (C) 2008 ARM Ltd. + * Copyright (C) 2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This is the "shell" of the ARMv7-M processor support. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/v7m.h> +#include "proc-macros.S" + +ENTRY(cpu_v7m_proc_init) + mov pc, lr +ENDPROC(cpu_v7m_proc_init) + +ENTRY(cpu_v7m_proc_fin) + mov pc, lr +ENDPROC(cpu_v7m_proc_fin) + +/* + * cpu_v7m_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * - loc - location to jump to for soft reset + */ + .align 5 +ENTRY(cpu_v7m_reset) + mov pc, r0 +ENDPROC(cpu_v7m_reset) + +/* + * cpu_v7m_do_idle() + * + * Idle the processor (eg, wait for interrupt). + * + * IRQs are already disabled. + */ +ENTRY(cpu_v7m_do_idle) + wfi + mov pc, lr +ENDPROC(cpu_v7m_do_idle) + +ENTRY(cpu_v7m_dcache_clean_area) + mov pc, lr +ENDPROC(cpu_v7m_dcache_clean_area) + +/* + * There is no MMU, so here is nothing to do. + */ +ENTRY(cpu_v7m_switch_mm) + mov pc, lr +ENDPROC(cpu_v7m_switch_mm) + +.globl cpu_v7m_suspend_size +.equ cpu_v7m_suspend_size, 0 + +#ifdef CONFIG_ARM_CPU_SUSPEND +ENTRY(cpu_v7m_do_suspend) + mov pc, lr +ENDPROC(cpu_v7m_do_suspend) + +ENTRY(cpu_v7m_do_resume) + mov pc, lr +ENDPROC(cpu_v7m_do_resume) +#endif + + .section ".text.init", #alloc, #execinstr + +/* + * __v7m_setup + * + * This should be able to cover all ARMv7-M cores. + */ +__v7m_setup: + @ Configure the vector table base address + ldr r0, =BASEADDR_V7M_SCB + ldr r12, =vector_table + str r12, [r0, V7M_SCB_VTOR] + + @ enable UsageFault, BusFault and MemManage fault. + ldr r5, [r0, #V7M_SCB_SHCSR] + orr r5, #(V7M_SCB_SHCSR_USGFAULTENA | V7M_SCB_SHCSR_BUSFAULTENA | V7M_SCB_SHCSR_MEMFAULTENA) + str r5, [r0, #V7M_SCB_SHCSR] + + @ Lower the priority of the SVC and PendSV exceptions + mov r5, #0x80000000 + str r5, [r0, V7M_SCB_SHPR2] @ set SVC priority + mov r5, #0x00800000 + str r5, [r0, V7M_SCB_SHPR3] @ set PendSV priority + + @ SVC to run the kernel in this mode + adr r1, BSYM(1f) + ldr r5, [r12, #11 * 4] @ read the SVC vector entry + str r1, [r12, #11 * 4] @ write the temporary SVC vector entry + mov r6, lr @ save LR + mov r7, sp @ save SP + ldr sp, =__v7m_setup_stack_top + cpsie i + svc #0 +1: cpsid i + str r5, [r12, #11 * 4] @ restore the original SVC vector entry + mov lr, r6 @ restore LR + mov sp, r7 @ restore SP + + @ Special-purpose control register + mov r1, #1 + msr control, r1 @ Thread mode has unpriviledged access + + @ Configure the System Control Register to ensure 8-byte stack alignment + @ Note the STKALIGN bit is either RW or RAO. + ldr r12, [r0, V7M_SCB_CCR] @ system control register + orr r12, #V7M_SCB_CCR_STKALIGN + str r12, [r0, V7M_SCB_CCR] + mov pc, lr +ENDPROC(__v7m_setup) + + define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 + + .section ".rodata" + string cpu_arch_name, "armv7m" + string cpu_elf_name "v7m" + string cpu_v7m_name "ARMv7-M" + + .section ".proc.info.init", #alloc, #execinstr + + /* + * Match any ARMv7-M processor core. + */ + .type __v7m_proc_info, #object +__v7m_proc_info: + .long 0x000f0000 @ Required ID value + .long 0x000f0000 @ Mask for ID + .long 0 @ proc_info_list.__cpu_mm_mmu_flags + .long 0 @ proc_info_list.__cpu_io_mmu_flags + b __v7m_setup @ proc_info_list.__cpu_flush + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT + .long cpu_v7m_name + .long v7m_processor_functions @ proc_info_list.proc + .long 0 @ proc_info_list.tlb + .long 0 @ proc_info_list.user + .long nop_cache_fns @ proc_info_list.cache + .size __v7m_proc_info, . - __v7m_proc_info + +__v7m_setup_stack: + .space 4 * 8 @ 8 registers +__v7m_setup_stack_top: diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index ec68155a8bf..3dc5cbea86c 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -6,7 +6,7 @@ config PLAT_SAMSUNG bool - depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P + depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS default y select GENERIC_IRQ_CHIP select NO_IOPORT @@ -15,12 +15,10 @@ config PLAT_SAMSUNG config PLAT_S5P bool - depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) default y select ARCH_REQUIRE_GPIOLIB - select ARM_GIC if ARCH_EXYNOS - select ARM_VIC if !ARCH_EXYNOS - select GIC_NON_BANKED if ARCH_EXYNOS4 + select ARM_VIC select NO_IOPORT select PLAT_SAMSUNG select S3C_GPIO_TRACK @@ -60,6 +58,20 @@ config S3C_LOWLEVEL_UART_PORT this configuration should be between zero and two. The port must have been initialised by the boot-loader before use. +config SAMSUNG_ATAGS + def_bool n + depends on !ARCH_MULTIPLATFORM + depends on ATAGS + help + This option enables ATAGS based boot support code for + Samsung platforms, including static platform devices, legacy + clock, timer and interrupt initialization, etc. + + Platforms that support only DT based boot need not to select + this option. + +if SAMSUNG_ATAGS + # timer options config SAMSUNG_HRT @@ -367,11 +379,6 @@ config S5P_DEV_JPEG help Compile in platform device definitions for JPEG codec -config S5P_DEV_MFC - bool - help - Compile in setup memory (init) code for MFC - config S5P_DEV_ONENAND bool help @@ -412,6 +419,21 @@ config S3C_DMA help Internal configuration for S3C DMA core +config S5P_IRQ_PM + bool + default y if S5P_PM + help + Legacy IRQ power management for S5P platforms + +config SAMSUNG_PM_GPIO + bool + default y if GPIO_SAMSUNG && PM + help + Include legacy GPIO power management code for platforms not using + pinctrl-samsung driver. + +endif + config SAMSUNG_DMADEV bool select ARM_AMBA @@ -421,6 +443,11 @@ config SAMSUNG_DMADEV help Use DMA device engine for PL330 DMAC. +config S5P_DEV_MFC + bool + help + Compile in setup memory (init) code for MFC + comment "Power management" config SAMSUNG_PM_DEBUG diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 03cea140cfd..98d07d8fc7a 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -31,10 +31,10 @@ obj-$(CONFIG_S3C_ADC) += adc.o # devices -obj-y += platformdata.o +obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o -obj-y += devs.o -obj-y += dev-uart.o +obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o +obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o @@ -52,11 +52,12 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += pm-gpio.o +obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o obj-$(CONFIG_SAMSUNG_WDT_RESET) += watchdog-reset.o -obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o +obj-$(CONFIG_S5P_PM) += s5p-pm.o +obj-$(CONFIG_S5P_IRQ_PM) += s5p-irq-pm.o obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h index d01576318b2..bd3a6db14cb 100644 --- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h +++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h @@ -28,7 +28,6 @@ struct s3c24xx_dma_map { const char *name; unsigned long channels[S3C_DMA_CHANNELS]; - unsigned long channels_rx[S3C_DMA_CHANNELS]; }; struct s3c24xx_dma_selection { @@ -38,10 +37,6 @@ struct s3c24xx_dma_selection { void (*select)(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map); - - void (*direction)(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map, - enum dma_data_direction dir); }; extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index f6fcadeee96..5d47ca35cab 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -166,6 +166,7 @@ extern void s3c_pm_check_store(void); */ extern void s3c_pm_configure_extint(void); +#ifdef CONFIG_GPIO_SAMSUNG /** * samsung_pm_restore_gpios() - restore the state of the gpios after sleep. * @@ -181,6 +182,10 @@ extern void samsung_pm_restore_gpios(void); * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios(). */ extern void samsung_pm_save_gpios(void); +#else +static inline void samsung_pm_restore_gpios(void) {} +static inline void samsung_pm_save_gpios(void) {} +#endif extern void s3c_pm_save_core(void); extern void s3c_pm_restore_core(void); diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 79d10fca909..3e5c4619caa 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -87,7 +87,7 @@ void __init s3c24xx_init_clocks(int xtal) } /* uart management */ - +#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) static int nr_uarts __initdata = 0; static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; @@ -134,11 +134,12 @@ void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) if (cpu == NULL) return; - if (cpu->init_uarts == NULL) { + if (cpu->init_uarts == NULL && IS_ENABLED(CONFIG_SAMSUNG_ATAGS)) { printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); } else (cpu->init_uarts)(cfg, no); } +#endif static int __init s3c_arch_init(void) { @@ -152,8 +153,9 @@ static int __init s3c_arch_init(void) ret = (cpu->init)(); if (ret != 0) return ret; - +#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts); +#endif return ret; } diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index c2ff92c30bd..a8de3cfe2ee 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -192,7 +192,8 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = { .resume = samsung_gpio_pm_2bit_resume, }; -#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) +#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) \ + || defined(CONFIG_ARCH_EXYNOS) static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); @@ -302,7 +303,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = { .save = samsung_gpio_pm_4bit_save, .resume = samsung_gpio_pm_4bit_resume, }; -#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ +#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P || CONFIG_ARCH_EXYNOS */ /** * samsung_pm_save_gpio() - save gpio chip data for suspend diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index bd7124c87fe..ea361364245 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -22,13 +22,17 @@ #include <asm/cacheflush.h> #include <asm/suspend.h> -#include <mach/hardware.h> -#include <mach/map.h> #include <plat/regs-serial.h> + +#ifdef CONFIG_SAMSUNG_ATAGS +#include <mach/hardware.h> +#include <mach/map.h> #include <mach/regs-clock.h> #include <mach/regs-irq.h> #include <mach/irqs.h> +#endif + #include <asm/irq.h> #include <plat/pm.h> diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index a93fb6fb660..ad51f85fbd0 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -17,10 +17,12 @@ #include <linux/of_fdt.h> #include <linux/of.h> +#include <plat/mfc.h> + +#ifdef CONFIG_SAMSUNG_ATAGS #include <mach/map.h> #include <mach/irqs.h> #include <plat/devs.h> -#include <plat/mfc.h> static struct resource s5p_mfc_resource[] = { [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), @@ -61,6 +63,10 @@ struct platform_device s5p_device_mfc_r = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; +#else +static struct platform_device s5p_device_mfc_l; +static struct platform_device s5p_device_mfc_r; +#endif struct s5p_mfc_reserved_mem { phys_addr_t base; @@ -70,6 +76,7 @@ struct s5p_mfc_reserved_mem { static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata; + void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, phys_addr_t lbase, unsigned int lsize) { @@ -93,6 +100,7 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, } } +#ifdef CONFIG_SAMSUNG_ATAGS static int __init s5p_mfc_memory_init(void) { int i; @@ -111,6 +119,7 @@ static int __init s5p_mfc_memory_init(void) return 0; } device_initcall(s5p_mfc_memory_init); +#endif #ifdef CONFIG_OF int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname, diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index b05ecab915c..5286e2d333b 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -26,4 +26,11 @@ config OMAP_INTERCONNECT help Driver to enable OMAP interconnect error handling driver. + +config ARM_CCI + bool "ARM CCI driver support" + depends on ARM + help + Driver supporting the CCI cache coherent interconnect for ARM + platforms. endmenu diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 3c7b53c1209..670cea44380 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -7,3 +7,5 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o # Interconnect bus driver for OMAP SoCs. obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o +# CCI cache coherent interconnect for ARM platforms +obj-$(CONFIG_ARM_CCI) += arm-cci.o diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c new file mode 100644 index 00000000000..733288967d4 --- /dev/null +++ b/drivers/bus/arm-cci.c @@ -0,0 +1,533 @@ +/* + * CCI cache coherent interconnect driver + * + * Copyright (C) 2013 ARM Ltd. + * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/arm-cci.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +#include <asm/cacheflush.h> +#include <asm/smp_plat.h> + +#define CCI_PORT_CTRL 0x0 +#define CCI_CTRL_STATUS 0xc + +#define CCI_ENABLE_SNOOP_REQ 0x1 +#define CCI_ENABLE_DVM_REQ 0x2 +#define CCI_ENABLE_REQ (CCI_ENABLE_SNOOP_REQ | CCI_ENABLE_DVM_REQ) + +struct cci_nb_ports { + unsigned int nb_ace; + unsigned int nb_ace_lite; +}; + +enum cci_ace_port_type { + ACE_INVALID_PORT = 0x0, + ACE_PORT, + ACE_LITE_PORT, +}; + +struct cci_ace_port { + void __iomem *base; + unsigned long phys; + enum cci_ace_port_type type; + struct device_node *dn; +}; + +static struct cci_ace_port *ports; +static unsigned int nb_cci_ports; + +static void __iomem *cci_ctrl_base; +static unsigned long cci_ctrl_phys; + +struct cpu_port { + u64 mpidr; + u32 port; +}; + +/* + * Use the port MSB as valid flag, shift can be made dynamic + * by computing number of bits required for port indexes. + * Code disabling CCI cpu ports runs with D-cache invalidated + * and SCTLR bit clear so data accesses must be kept to a minimum + * to improve performance; for now shift is left static to + * avoid one more data access while disabling the CCI port. + */ +#define PORT_VALID_SHIFT 31 +#define PORT_VALID (0x1 << PORT_VALID_SHIFT) + +static inline void init_cpu_port(struct cpu_port *port, u32 index, u64 mpidr) +{ + port->port = PORT_VALID | index; + port->mpidr = mpidr; +} + +static inline bool cpu_port_is_valid(struct cpu_port *port) +{ + return !!(port->port & PORT_VALID); +} + +static inline bool cpu_port_match(struct cpu_port *port, u64 mpidr) +{ + return port->mpidr == (mpidr & MPIDR_HWID_BITMASK); +} + +static struct cpu_port cpu_port[NR_CPUS]; + +/** + * __cci_ace_get_port - Function to retrieve the port index connected to + * a cpu or device. + * + * @dn: device node of the device to look-up + * @type: port type + * + * Return value: + * - CCI port index if success + * - -ENODEV if failure + */ +static int __cci_ace_get_port(struct device_node *dn, int type) +{ + int i; + bool ace_match; + struct device_node *cci_portn; + + cci_portn = of_parse_phandle(dn, "cci-control-port", 0); + for (i = 0; i < nb_cci_ports; i++) { + ace_match = ports[i].type == type; + if (ace_match && cci_portn == ports[i].dn) + return i; + } + return -ENODEV; +} + +int cci_ace_get_port(struct device_node *dn) +{ + return __cci_ace_get_port(dn, ACE_LITE_PORT); +} +EXPORT_SYMBOL_GPL(cci_ace_get_port); + +static void __init cci_ace_init_ports(void) +{ + int port, ac, cpu; + u64 hwid; + const u32 *cell; + struct device_node *cpun, *cpus; + + cpus = of_find_node_by_path("/cpus"); + if (WARN(!cpus, "Missing cpus node, bailing out\n")) + return; + + if (WARN_ON(of_property_read_u32(cpus, "#address-cells", &ac))) + ac = of_n_addr_cells(cpus); + + /* + * Port index look-up speeds up the function disabling ports by CPU, + * since the logical to port index mapping is done once and does + * not change after system boot. + * The stashed index array is initialized for all possible CPUs + * at probe time. + */ + for_each_child_of_node(cpus, cpun) { + if (of_node_cmp(cpun->type, "cpu")) + continue; + cell = of_get_property(cpun, "reg", NULL); + if (WARN(!cell, "%s: missing reg property\n", cpun->full_name)) + continue; + + hwid = of_read_number(cell, ac); + cpu = get_logical_index(hwid & MPIDR_HWID_BITMASK); + + if (cpu < 0 || !cpu_possible(cpu)) + continue; + port = __cci_ace_get_port(cpun, ACE_PORT); + if (port < 0) + continue; + + init_cpu_port(&cpu_port[cpu], port, cpu_logical_map(cpu)); + } + + for_each_possible_cpu(cpu) { + WARN(!cpu_port_is_valid(&cpu_port[cpu]), + "CPU %u does not have an associated CCI port\n", + cpu); + } +} +/* + * Functions to enable/disable a CCI interconnect slave port + * + * They are called by low-level power management code to disable slave + * interfaces snoops and DVM broadcast. + * Since they may execute with cache data allocation disabled and + * after the caches have been cleaned and invalidated the functions provide + * no explicit locking since they may run with D-cache disabled, so normal + * cacheable kernel locks based on ldrex/strex may not work. + * Locking has to be provided by BSP implementations to ensure proper + * operations. + */ + +/** + * cci_port_control() - function to control a CCI port + * + * @port: index of the port to setup + * @enable: if true enables the port, if false disables it + */ +static void notrace cci_port_control(unsigned int port, bool enable) +{ + void __iomem *base = ports[port].base; + + writel_relaxed(enable ? CCI_ENABLE_REQ : 0, base + CCI_PORT_CTRL); + /* + * This function is called from power down procedures + * and must not execute any instruction that might + * cause the processor to be put in a quiescent state + * (eg wfi). Hence, cpu_relax() can not be added to this + * read loop to optimize power, since it might hide possibly + * disruptive operations. + */ + while (readl_relaxed(cci_ctrl_base + CCI_CTRL_STATUS) & 0x1) + ; +} + +/** + * cci_disable_port_by_cpu() - function to disable a CCI port by CPU + * reference + * + * @mpidr: mpidr of the CPU whose CCI port should be disabled + * + * Disabling a CCI port for a CPU implies disabling the CCI port + * controlling that CPU cluster. Code disabling CPU CCI ports + * must make sure that the CPU running the code is the last active CPU + * in the cluster ie all other CPUs are quiescent in a low power state. + * + * Return: + * 0 on success + * -ENODEV on port look-up failure + */ +int notrace cci_disable_port_by_cpu(u64 mpidr) +{ + int cpu; + bool is_valid; + for (cpu = 0; cpu < nr_cpu_ids; cpu++) { + is_valid = cpu_port_is_valid(&cpu_port[cpu]); + if (is_valid && cpu_port_match(&cpu_port[cpu], mpidr)) { + cci_port_control(cpu_port[cpu].port, false); + return 0; + } + } + return -ENODEV; +} +EXPORT_SYMBOL_GPL(cci_disable_port_by_cpu); + +/** + * cci_enable_port_for_self() - enable a CCI port for calling CPU + * + * Enabling a CCI port for the calling CPU implies enabling the CCI + * port controlling that CPU's cluster. Caller must make sure that the + * CPU running the code is the first active CPU in the cluster and all + * other CPUs are quiescent in a low power state or waiting for this CPU + * to complete the CCI initialization. + * + * Because this is called when the MMU is still off and with no stack, + * the code must be position independent and ideally rely on callee + * clobbered registers only. To achieve this we must code this function + * entirely in assembler. + * + * On success this returns with the proper CCI port enabled. In case of + * any failure this never returns as the inability to enable the CCI is + * fatal and there is no possible recovery at this stage. + */ +asmlinkage void __naked cci_enable_port_for_self(void) +{ + asm volatile ("\n" +" .arch armv7-a\n" +" mrc p15, 0, r0, c0, c0, 5 @ get MPIDR value \n" +" and r0, r0, #"__stringify(MPIDR_HWID_BITMASK)" \n" +" adr r1, 5f \n" +" ldr r2, [r1] \n" +" add r1, r1, r2 @ &cpu_port \n" +" add ip, r1, %[sizeof_cpu_port] \n" + + /* Loop over the cpu_port array looking for a matching MPIDR */ +"1: ldr r2, [r1, %[offsetof_cpu_port_mpidr_lsb]] \n" +" cmp r2, r0 @ compare MPIDR \n" +" bne 2f \n" + + /* Found a match, now test port validity */ +" ldr r3, [r1, %[offsetof_cpu_port_port]] \n" +" tst r3, #"__stringify(PORT_VALID)" \n" +" bne 3f \n" + + /* no match, loop with the next cpu_port entry */ +"2: add r1, r1, %[sizeof_struct_cpu_port] \n" +" cmp r1, ip @ done? \n" +" blo 1b \n" + + /* CCI port not found -- cheaply try to stall this CPU */ +"cci_port_not_found: \n" +" wfi \n" +" wfe \n" +" b cci_port_not_found \n" + + /* Use matched port index to look up the corresponding ports entry */ +"3: bic r3, r3, #"__stringify(PORT_VALID)" \n" +" adr r0, 6f \n" +" ldmia r0, {r1, r2} \n" +" sub r1, r1, r0 @ virt - phys \n" +" ldr r0, [r0, r2] @ *(&ports) \n" +" mov r2, %[sizeof_struct_ace_port] \n" +" mla r0, r2, r3, r0 @ &ports[index] \n" +" sub r0, r0, r1 @ virt_to_phys() \n" + + /* Enable the CCI port */ +" ldr r0, [r0, %[offsetof_port_phys]] \n" +" mov r3, #"__stringify(CCI_ENABLE_REQ)" \n" +" str r3, [r0, #"__stringify(CCI_PORT_CTRL)"] \n" + + /* poll the status reg for completion */ +" adr r1, 7f \n" +" ldr r0, [r1] \n" +" ldr r0, [r0, r1] @ cci_ctrl_base \n" +"4: ldr r1, [r0, #"__stringify(CCI_CTRL_STATUS)"] \n" +" tst r1, #1 \n" +" bne 4b \n" + +" mov r0, #0 \n" +" bx lr \n" + +" .align 2 \n" +"5: .word cpu_port - . \n" +"6: .word . \n" +" .word ports - 6b \n" +"7: .word cci_ctrl_phys - . \n" + : : + [sizeof_cpu_port] "i" (sizeof(cpu_port)), +#ifndef __ARMEB__ + [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)), +#else + [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)+4), +#endif + [offsetof_cpu_port_port] "i" (offsetof(struct cpu_port, port)), + [sizeof_struct_cpu_port] "i" (sizeof(struct cpu_port)), + [sizeof_struct_ace_port] "i" (sizeof(struct cci_ace_port)), + [offsetof_port_phys] "i" (offsetof(struct cci_ace_port, phys)) ); + + unreachable(); +} + +/** + * __cci_control_port_by_device() - function to control a CCI port by device + * reference + * + * @dn: device node pointer of the device whose CCI port should be + * controlled + * @enable: if true enables the port, if false disables it + * + * Return: + * 0 on success + * -ENODEV on port look-up failure + */ +int notrace __cci_control_port_by_device(struct device_node *dn, bool enable) +{ + int port; + + if (!dn) + return -ENODEV; + + port = __cci_ace_get_port(dn, ACE_LITE_PORT); + if (WARN_ONCE(port < 0, "node %s ACE lite port look-up failure\n", + dn->full_name)) + return -ENODEV; + cci_port_control(port, enable); + return 0; +} +EXPORT_SYMBOL_GPL(__cci_control_port_by_device); + +/** + * __cci_control_port_by_index() - function to control a CCI port by port index + * + * @port: port index previously retrieved with cci_ace_get_port() + * @enable: if true enables the port, if false disables it + * + * Return: + * 0 on success + * -ENODEV on port index out of range + * -EPERM if operation carried out on an ACE PORT + */ +int notrace __cci_control_port_by_index(u32 port, bool enable) +{ + if (port >= nb_cci_ports || ports[port].type == ACE_INVALID_PORT) + return -ENODEV; + /* + * CCI control for ports connected to CPUS is extremely fragile + * and must be made to go through a specific and controlled + * interface (ie cci_disable_port_by_cpu(); control by general purpose + * indexing is therefore disabled for ACE ports. + */ + if (ports[port].type == ACE_PORT) + return -EPERM; + + cci_port_control(port, enable); + return 0; +} +EXPORT_SYMBOL_GPL(__cci_control_port_by_index); + +static const struct cci_nb_ports cci400_ports = { + .nb_ace = 2, + .nb_ace_lite = 3 +}; + +static const struct of_device_id arm_cci_matches[] = { + {.compatible = "arm,cci-400", .data = &cci400_ports }, + {}, +}; + +static const struct of_device_id arm_cci_ctrl_if_matches[] = { + {.compatible = "arm,cci-400-ctrl-if", }, + {}, +}; + +static int __init cci_probe(void) +{ + struct cci_nb_ports const *cci_config; + int ret, i, nb_ace = 0, nb_ace_lite = 0; + struct device_node *np, *cp; + struct resource res; + const char *match_str; + bool is_ace; + + np = of_find_matching_node(NULL, arm_cci_matches); + if (!np) + return -ENODEV; + + cci_config = of_match_node(arm_cci_matches, np)->data; + if (!cci_config) + return -ENODEV; + + nb_cci_ports = cci_config->nb_ace + cci_config->nb_ace_lite; + + ports = kcalloc(sizeof(*ports), nb_cci_ports, GFP_KERNEL); + if (!ports) + return -ENOMEM; + + ret = of_address_to_resource(np, 0, &res); + if (!ret) { + cci_ctrl_base = ioremap(res.start, resource_size(&res)); + cci_ctrl_phys = res.start; + } + if (ret || !cci_ctrl_base) { + WARN(1, "unable to ioremap CCI ctrl\n"); + ret = -ENXIO; + goto memalloc_err; + } + + for_each_child_of_node(np, cp) { + if (!of_match_node(arm_cci_ctrl_if_matches, cp)) + continue; + + i = nb_ace + nb_ace_lite; + + if (i >= nb_cci_ports) + break; + + if (of_property_read_string(cp, "interface-type", + &match_str)) { + WARN(1, "node %s missing interface-type property\n", + cp->full_name); + continue; + } + is_ace = strcmp(match_str, "ace") == 0; + if (!is_ace && strcmp(match_str, "ace-lite")) { + WARN(1, "node %s containing invalid interface-type property, skipping it\n", + cp->full_name); + continue; + } + + ret = of_address_to_resource(cp, 0, &res); + if (!ret) { + ports[i].base = ioremap(res.start, resource_size(&res)); + ports[i].phys = res.start; + } + if (ret || !ports[i].base) { + WARN(1, "unable to ioremap CCI port %d\n", i); + continue; + } + + if (is_ace) { + if (WARN_ON(nb_ace >= cci_config->nb_ace)) + continue; + ports[i].type = ACE_PORT; + ++nb_ace; + } else { + if (WARN_ON(nb_ace_lite >= cci_config->nb_ace_lite)) + continue; + ports[i].type = ACE_LITE_PORT; + ++nb_ace_lite; + } + ports[i].dn = cp; + } + + /* initialize a stashed array of ACE ports to speed-up look-up */ + cci_ace_init_ports(); + + /* + * Multi-cluster systems may need this data when non-coherent, during + * cluster power-up/power-down. Make sure it reaches main memory. + */ + sync_cache_w(&cci_ctrl_base); + sync_cache_w(&cci_ctrl_phys); + sync_cache_w(&ports); + sync_cache_w(&cpu_port); + __sync_cache_range_w(ports, sizeof(*ports) * nb_cci_ports); + pr_info("ARM CCI driver probed\n"); + return 0; + +memalloc_err: + + kfree(ports); + return ret; +} + +static int cci_init_status = -EAGAIN; +static DEFINE_MUTEX(cci_probing); + +static int __init cci_init(void) +{ + if (cci_init_status != -EAGAIN) + return cci_init_status; + + mutex_lock(&cci_probing); + if (cci_init_status == -EAGAIN) + cci_init_status = cci_probe(); + mutex_unlock(&cci_probing); + return cci_init_status; +} + +/* + * To sort out early init calls ordering a helper function is provided to + * check if the CCI driver has beed initialized. Function check if the driver + * has been initialized, if not it calls the init function that probes + * the driver and updates the return value. + */ +bool __init cci_probed(void) +{ + return cci_init() == 0; +} +EXPORT_SYMBOL_GPL(cci_probed); + +early_initcall(cci_init); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ARM CCI support"); diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f0e46997bb1..f9cf7085ef7 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -27,7 +27,7 @@ obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o -obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o +obj-$(CONFIG_ARCH_ZYNQ) += zynq/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c index a15f7928fb1..8774e058cb6 100644 --- a/drivers/clk/clk-u300.c +++ b/drivers/clk/clk-u300.c @@ -11,7 +11,349 @@ #include <linux/io.h> #include <linux/clk-provider.h> #include <linux/spinlock.h> -#include <mach/syscon.h> +#include <linux/of.h> + +/* APP side SYSCON registers */ +/* CLK Control Register 16bit (R/W) */ +#define U300_SYSCON_CCR (0x0000) +#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040) +#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020) +#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00) +/* CLK Status Register 16bit (R/W) */ +#define U300_SYSCON_CSR (0x0004) +#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002) +#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) +/* Reset lines for SLOW devices 16bit (R/W) */ +#define U300_SYSCON_RSR (0x0014) +#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) +#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) +#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) +#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) +#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020) +#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010) +#define U300_SYSCON_RSR_EH_RESET_EN (0x0008) +#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004) +#define U300_SYSCON_RSR_UART_RESET_EN (0x0002) +#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) +/* Reset lines for FAST devices 16bit (R/W) */ +#define U300_SYSCON_RFR (0x0018) +#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) +#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) +#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) +#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) +#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008) +#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004) +#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002) +#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) +/* Reset lines for the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_RRR (0x001c) +#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) +#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) +#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) +#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) +#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) +#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080) +#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040) +#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020) +#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010) +#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008) +#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004) +#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002) +#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) +/* Clock enable for SLOW peripherals 16bit (R/W) */ +#define U300_SYSCON_CESR (0x0020) +#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) +#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) +#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) +#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) +#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010) +#define U300_SYSCON_CESR_EH_CLK_EN (0x0008) +#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004) +#define U300_SYSCON_CESR_UART_CLK_EN (0x0002) +#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) +/* Clock enable for FAST peripherals 16bit (R/W) */ +#define U300_SYSCON_CEFR (0x0024) +#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) +#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) +#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) +#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) +#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) +#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) +#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) +#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) +#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) +#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) +/* Clock enable for the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_CERR (0x0028) +#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) +#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) +#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) +#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) +#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) +#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100) +#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080) +#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040) +#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020) +#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010) +#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008) +#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004) +#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002) +#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) +/* Single block clock enable 16bit (-/W) */ +#define U300_SYSCON_SBCER (0x002c) +#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) +#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) +#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) +#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) +#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004) +#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003) +#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) +#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) +#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) +#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) +#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) +#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) +#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) +#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015) +#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014) +#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013) +#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) +#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) +#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) +#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) +#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) +#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) +#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) +#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) +#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028) +#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027) +#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026) +#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025) +#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024) +#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023) +#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022) +#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021) +#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020) +/* Single block clock disable 16bit (-/W) */ +#define U300_SYSCON_SBCDR (0x0030) +/* Same values as above for SBCER */ +/* Clock force SLOW peripherals 16bit (R/W) */ +#define U300_SYSCON_CFSR (0x003c) +#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) +#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) +#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) +#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) +#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010) +#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008) +#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004) +#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002) +#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001) +/* Clock force FAST peripherals 16bit (R/W) */ +#define U300_SYSCON_CFFR (0x40) +/* Values not defined. Define if you want to use them. */ +/* Clock force the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_CFRR (0x44) +#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) +#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) +#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) +#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) +#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) +#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100) +#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080) +#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040) +#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020) +#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010) +#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008) +#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004) +#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002) +#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001) +/* PLL208 Frequency Control 16bit (R/W) */ +#define U300_SYSCON_PFCR (0x48) +#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F) +/* Power Management Control 16bit (R/W) */ +#define U300_SYSCON_PMCR (0x50) +#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) +#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) +/* Reset Out 16bit (R/W) */ +#define U300_SYSCON_RCR (0x6c) +#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001) +/* EMIF Slew Rate Control 16bit (R/W) */ +#define U300_SYSCON_SRCLR (0x70) +#define U300_SYSCON_SRCLR_MASK (0x03FF) +#define U300_SYSCON_SRCLR_VALUE (0x03FF) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001) +/* EMIF Clock Control Register 16bit (R/W) */ +#define U300_SYSCON_ECCR (0x0078) +#define U300_SYSCON_ECCR_MASK (0x000F) +#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008) +#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) +#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) +#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) +/* MMC/MSPRO frequency divider register 0 16bit (R/W) */ +#define U300_SYSCON_MMF0R (0x90) +#define U300_SYSCON_MMF0R_MASK (0x00FF) +#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0) +#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F) +/* MMC/MSPRO frequency divider register 1 16bit (R/W) */ +#define U300_SYSCON_MMF1R (0x94) +#define U300_SYSCON_MMF1R_MASK (0x00FF) +#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0) +#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F) +/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */ +#define U300_SYSCON_MMCR (0x9C) +#define U300_SYSCON_MMCR_MASK (0x0003) +#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) +#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) +/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ +#define U300_SYSCON_S0CCR (0x120) +#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) +#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000) +#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */ +#define U300_SYSCON_S1CCR (0x124) +#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) +#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000) +#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */ +#define U300_SYSCON_S2CCR (0x128) +#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) +#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) +#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000) +#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SC_PLL_IRQ_CONTROL 16bit (R/W) */ +#define U300_SYSCON_PICR (0x0130) +#define U300_SYSCON_PICR_MASK (0x00FF) +#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080) +#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040) +#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020) +#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010) +#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008) +#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004) +#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002) +#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001) +/* SC_PLL_IRQ_STATUS 16 bit (R/-) */ +#define U300_SYSCON_PISR (0x0134) +#define U300_SYSCON_PISR_MASK (0x000F) +#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008) +#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004) +#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002) +#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001) +/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */ +#define U300_SYSCON_PICLR (0x0138) +#define U300_SYSCON_PICLR_MASK (0x000F) +#define U300_SYSCON_PICLR_RWMASK (0x0000) +#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008) +#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004) +#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002) +#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001) +/* Clock activity observability register 0 */ +#define U300_SYSCON_C0OAR (0x140) +#define U300_SYSCON_C0OAR_MASK (0xFFFF) +#define U300_SYSCON_C0OAR_VALUE (0xFFFF) +#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000) +#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000) +#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000) +#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000) +#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800) +#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400) +#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200) +#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100) +#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080) +#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040) +#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020) +#define U300_SYSCON_C0OAR_APEX_CLK (0x0010) +#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008) +#define U300_SYSCON_C0OAR_AHB_CLK (0x0004) +#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002) +#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001) +/* Clock activity observability register 1 */ +#define U300_SYSCON_C1OAR (0x144) +#define U300_SYSCON_C1OAR_MASK (0x3FFE) +#define U300_SYSCON_C1OAR_VALUE (0x3FFE) +#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000) +#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000) +#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800) +#define U300_SYSCON_C1OAR_MMC_CLK (0x0400) +#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200) +#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100) +#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080) +#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040) +#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020) +#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010) +#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008) +#define U300_SYSCON_C1OAR_PPM_CLK (0x0004) +#define U300_SYSCON_C1OAR_DMA_CLK (0x0002) +/* Clock activity observability register 2 */ +#define U300_SYSCON_C2OAR (0x148) +#define U300_SYSCON_C2OAR_MASK (0x0FFF) +#define U300_SYSCON_C2OAR_VALUE (0x0FFF) +#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800) +#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400) +#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200) +#define U300_SYSCON_C2OAR_VC_CLK (0x0100) +#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080) +#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040) +#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020) +#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010) +#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008) +#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004) +#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002) +#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001) + /* * The clocking hierarchy currently looks like this. @@ -386,6 +728,213 @@ syscon_clk_register(struct device *dev, const char *name, return clk; } +#define U300_CLK_TYPE_SLOW 0 +#define U300_CLK_TYPE_FAST 1 +#define U300_CLK_TYPE_REST 2 + +/** + * struct u300_clock - defines the bits and pieces for a certain clock + * @type: the clock type, slow fast or rest + * @id: the bit in the slow/fast/rest register for this clock + * @hw_ctrld: whether the clock is hardware controlled + * @clk_val: a value to poke in the one-write enable/disable registers + */ +struct u300_clock { + u8 type; + u8 id; + bool hw_ctrld; + u16 clk_val; +}; + +struct u300_clock const __initconst u300_clk_lookup[] = { + { + .type = U300_CLK_TYPE_REST, + .id = 3, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_CPU_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 4, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 5, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 6, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 8, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 9, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 10, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 12, + .hw_ctrld = false, + /* INTCON: cannot be enabled, just taken out of reset */ + .clk_val = 0xFFFFU, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 0, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 1, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 2, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 5, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 6, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 0, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 1, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 4, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 6, + .hw_ctrld = true, + /* No clock enable register bit */ + .clk_val = 0xFFFFU, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 7, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 8, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, + }, +}; + +static void __init of_u300_syscon_clk_init(struct device_node *np) +{ + struct clk *clk = ERR_PTR(-EINVAL); + const char *clk_name = np->name; + const char *parent_name; + void __iomem *res_reg; + void __iomem *en_reg; + u32 clk_type; + u32 clk_id; + int i; + + if (of_property_read_u32(np, "clock-type", &clk_type)) { + pr_err("%s: syscon clock \"%s\" missing clock-type property\n", + __func__, clk_name); + return; + } + if (of_property_read_u32(np, "clock-id", &clk_id)) { + pr_err("%s: syscon clock \"%s\" missing clock-id property\n", + __func__, clk_name); + return; + } + parent_name = of_clk_get_parent_name(np, 0); + + switch (clk_type) { + case U300_CLK_TYPE_SLOW: + res_reg = syscon_vbase + U300_SYSCON_RSR; + en_reg = syscon_vbase + U300_SYSCON_CESR; + break; + case U300_CLK_TYPE_FAST: + res_reg = syscon_vbase + U300_SYSCON_RFR; + en_reg = syscon_vbase + U300_SYSCON_CEFR; + break; + case U300_CLK_TYPE_REST: + res_reg = syscon_vbase + U300_SYSCON_RRR; + en_reg = syscon_vbase + U300_SYSCON_CERR; + break; + default: + pr_err("unknown clock type %x specified\n", clk_type); + return; + } + + for (i = 0; i < ARRAY_SIZE(u300_clk_lookup); i++) { + const struct u300_clock *u3clk = &u300_clk_lookup[i]; + + if (u3clk->type == clk_type && u3clk->id == clk_id) + clk = syscon_clk_register(NULL, + clk_name, parent_name, + 0, u3clk->hw_ctrld, + res_reg, u3clk->id, + en_reg, u3clk->id, + u3clk->clk_val); + } + + if (!IS_ERR(clk)) { + of_clk_add_provider(np, of_clk_src_simple_get, clk); + + /* + * Some few system clocks - device tree does not + * represent clocks without a corresponding device node. + * for now we add these three clocks here. + */ + if (clk_type == U300_CLK_TYPE_REST && clk_id == 5) + clk_register_clkdev(clk, NULL, "pl172"); + if (clk_type == U300_CLK_TYPE_REST && clk_id == 9) + clk_register_clkdev(clk, NULL, "semi"); + if (clk_type == U300_CLK_TYPE_REST && clk_id == 12) + clk_register_clkdev(clk, NULL, "intcon"); + } +} + /** * struct clk_mclk - U300 MCLK clock (MMC/SD clock) * @hw: corresponding clock hardware entry @@ -590,10 +1139,41 @@ mclk_clk_register(struct device *dev, const char *name, return clk; } +static void __init of_u300_syscon_mclk_init(struct device_node *np) +{ + struct clk *clk = ERR_PTR(-EINVAL); + const char *clk_name = np->name; + const char *parent_name; + + parent_name = of_clk_get_parent_name(np, 0); + clk = mclk_clk_register(NULL, clk_name, parent_name, false); + if (!IS_ERR(clk)) + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static const __initconst struct of_device_id u300_clk_match[] = { + { + .compatible = "fixed-clock", + .data = of_fixed_clk_setup, + }, + { + .compatible = "fixed-factor-clock", + .data = of_fixed_factor_clk_setup, + }, + { + .compatible = "stericsson,u300-syscon-clk", + .data = of_u300_syscon_clk_init, + }, + { + .compatible = "stericsson,u300-syscon-mclk", + .data = of_u300_syscon_mclk_init, + }, +}; + + void __init u300_clk_init(void __iomem *base) { u16 val; - struct clk *clk; syscon_vbase = base; @@ -610,137 +1190,5 @@ void __init u300_clk_init(void __iomem *base) val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; writew(val, syscon_vbase + U300_SYSCON_PMCR); - /* These are always available (RTC and PLL13) */ - clk = clk_register_fixed_rate(NULL, "app_32_clk", NULL, - CLK_IS_ROOT, 32768); - /* The watchdog sits directly on the 32 kHz clock */ - clk_register_clkdev(clk, NULL, "coh901327_wdog"); - clk = clk_register_fixed_rate(NULL, "pll13", NULL, - CLK_IS_ROOT, 13000000); - - /* These derive from PLL208 */ - clk = clk_register_fixed_rate(NULL, "pll208", NULL, - CLK_IS_ROOT, 208000000); - clk = clk_register_fixed_factor(NULL, "app_208_clk", "pll208", - 0, 1, 1); - clk = clk_register_fixed_factor(NULL, "app_104_clk", "pll208", - 0, 1, 2); - clk = clk_register_fixed_factor(NULL, "app_52_clk", "pll208", - 0, 1, 4); - /* The 52 MHz is divided down to 26 MHz */ - clk = clk_register_fixed_factor(NULL, "app_26_clk", "app_52_clk", - 0, 1, 2); - - /* Directly on the AMBA interconnect */ - clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 3, - syscon_vbase + U300_SYSCON_CERR, 3, - U300_SYSCON_SBCER_CPU_CLK_EN); - clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 4, - syscon_vbase + U300_SYSCON_CERR, 4, - U300_SYSCON_SBCER_DMAC_CLK_EN); - clk_register_clkdev(clk, NULL, "dma"); - clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 6, - syscon_vbase + U300_SYSCON_CERR, 6, - U300_SYSCON_SBCER_NANDIF_CLK_EN); - clk_register_clkdev(clk, NULL, "fsmc-nand"); - clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 8, - syscon_vbase + U300_SYSCON_CERR, 8, - U300_SYSCON_SBCER_XGAM_CLK_EN); - clk_register_clkdev(clk, NULL, "xgam"); - clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 9, - syscon_vbase + U300_SYSCON_CERR, 9, - U300_SYSCON_SBCER_SEMI_CLK_EN); - clk_register_clkdev(clk, NULL, "semi"); - - /* AHB bridge clocks */ - clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 10, - syscon_vbase + U300_SYSCON_CERR, 10, - U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN); - clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 12, - syscon_vbase + U300_SYSCON_CERR, 12, - /* Cannot be enabled, just taken out of reset */ - 0xFFFFU); - clk_register_clkdev(clk, NULL, "intcon"); - clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 5, - syscon_vbase + U300_SYSCON_CERR, 5, - U300_SYSCON_SBCER_EMIF_CLK_EN); - clk_register_clkdev(clk, NULL, "pl172"); - - /* FAST bridge clocks */ - clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true, - syscon_vbase + U300_SYSCON_RFR, 0, - syscon_vbase + U300_SYSCON_CEFR, 0, - U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN); - clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 1, - syscon_vbase + U300_SYSCON_CEFR, 1, - U300_SYSCON_SBCER_I2C0_CLK_EN); - clk_register_clkdev(clk, NULL, "stu300.0"); - clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 2, - syscon_vbase + U300_SYSCON_CEFR, 2, - U300_SYSCON_SBCER_I2C1_CLK_EN); - clk_register_clkdev(clk, NULL, "stu300.1"); - clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 5, - syscon_vbase + U300_SYSCON_CEFR, 5, - U300_SYSCON_SBCER_MMC_CLK_EN); - clk_register_clkdev(clk, "apb_pclk", "mmci"); - clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 6, - syscon_vbase + U300_SYSCON_CEFR, 6, - U300_SYSCON_SBCER_SPI_CLK_EN); - /* The SPI has no external clock for the outward bus, uses the pclk */ - clk_register_clkdev(clk, NULL, "pl022"); - clk_register_clkdev(clk, "apb_pclk", "pl022"); - - /* SLOW bridge clocks */ - clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true, - syscon_vbase + U300_SYSCON_RSR, 0, - syscon_vbase + U300_SYSCON_CESR, 0, - U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN); - clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 1, - syscon_vbase + U300_SYSCON_CESR, 1, - U300_SYSCON_SBCER_UART_CLK_EN); - /* Same clock is used for APB and outward bus */ - clk_register_clkdev(clk, NULL, "uart0"); - clk_register_clkdev(clk, "apb_pclk", "uart0"); - clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 4, - syscon_vbase + U300_SYSCON_CESR, 4, - U300_SYSCON_SBCER_GPIO_CLK_EN); - clk_register_clkdev(clk, NULL, "u300-gpio"); - clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 5, - syscon_vbase + U300_SYSCON_CESR, 6, - U300_SYSCON_SBCER_KEYPAD_CLK_EN); - clk_register_clkdev(clk, NULL, "coh901461-keypad"); - clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true, - syscon_vbase + U300_SYSCON_RSR, 6, - /* No clock enable register bit */ - NULL, 0, 0xFFFFU); - clk_register_clkdev(clk, NULL, "rtc-coh901331"); - clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 7, - syscon_vbase + U300_SYSCON_CESR, 7, - U300_SYSCON_SBCER_APP_TMR_CLK_EN); - clk_register_clkdev(clk, NULL, "apptimer"); - clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 8, - syscon_vbase + U300_SYSCON_CESR, 8, - U300_SYSCON_SBCER_ACC_TMR_CLK_EN); - clk_register_clkdev(clk, NULL, "timer"); - - /* Then this special MMC/SD clock */ - clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false); - clk_register_clkdev(clk, NULL, "mmci"); + of_clk_init(u300_clk_match); } diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c deleted file mode 100644 index 32062977f45..00000000000 --- a/drivers/clk/clk-zynq.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * Copyright (c) 2012 National Instruments - * - * Josh Cartwright <josh.cartwright@ni.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/io.h> -#include <linux/of.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/clk-provider.h> -#include <linux/clk/zynq.h> - -static void __iomem *slcr_base; - -struct zynq_pll_clk { - struct clk_hw hw; - void __iomem *pll_ctrl; - void __iomem *pll_cfg; -}; - -#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw) - -#define CTRL_PLL_FDIV(x) ((x) >> 12) - -static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_pll_clk *pll = to_zynq_pll_clk(hw); - return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl)); -} - -static const struct clk_ops zynq_pll_clk_ops = { - .recalc_rate = zynq_pll_recalc_rate, -}; - -static void __init zynq_pll_clk_setup(struct device_node *np) -{ - struct clk_init_data init; - struct zynq_pll_clk *pll; - const char *parent_name; - struct clk *clk; - u32 regs[2]; - int ret; - - ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs)); - if (WARN_ON(ret)) - return; - - pll = kzalloc(sizeof(*pll), GFP_KERNEL); - if (WARN_ON(!pll)) - return; - - pll->pll_ctrl = slcr_base + regs[0]; - pll->pll_cfg = slcr_base + regs[1]; - - of_property_read_string(np, "clock-output-names", &init.name); - - init.ops = &zynq_pll_clk_ops; - parent_name = of_clk_get_parent_name(np, 0); - init.parent_names = &parent_name; - init.num_parents = 1; - - pll->hw.init = &init; - - clk = clk_register(NULL, &pll->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(ret)) - return; -} -CLK_OF_DECLARE(zynq_pll, "xlnx,zynq-pll", zynq_pll_clk_setup); - -struct zynq_periph_clk { - struct clk_hw hw; - struct clk_onecell_data onecell_data; - struct clk *gates[2]; - void __iomem *clk_ctrl; - spinlock_t clkact_lock; -}; - -#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw) - -static const u8 periph_clk_parent_map[] = { - 0, 0, 1, 2 -}; -#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4]) -#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) - -static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); - return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl)); -} - -static u8 zynq_periph_get_parent(struct clk_hw *hw) -{ - struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); - return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl)); -} - -static const struct clk_ops zynq_periph_clk_ops = { - .recalc_rate = zynq_periph_recalc_rate, - .get_parent = zynq_periph_get_parent, -}; - -static void __init zynq_periph_clk_setup(struct device_node *np) -{ - struct zynq_periph_clk *periph; - const char *parent_names[3]; - struct clk_init_data init; - int clk_num = 0, err; - const char *name; - struct clk *clk; - u32 reg; - int i; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - periph = kzalloc(sizeof(*periph), GFP_KERNEL); - if (WARN_ON(!periph)) - return; - - periph->clk_ctrl = slcr_base + reg; - spin_lock_init(&periph->clkact_lock); - - init.name = np->name; - init.ops = &zynq_periph_clk_ops; - for (i = 0; i < ARRAY_SIZE(parent_names); i++) - parent_names[i] = of_clk_get_parent_name(np, i); - init.parent_names = parent_names; - init.num_parents = ARRAY_SIZE(parent_names); - - periph->hw.init = &init; - - clk = clk_register(NULL, &periph->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - err = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(err)) - return; - - err = of_property_read_string_index(np, "clock-output-names", 0, - &name); - if (WARN_ON(err)) - return; - - periph->gates[0] = clk_register_gate(NULL, name, np->name, 0, - periph->clk_ctrl, 0, 0, - &periph->clkact_lock); - if (WARN_ON(IS_ERR(periph->gates[0]))) - return; - clk_num++; - - /* some periph clks have 2 downstream gates */ - err = of_property_read_string_index(np, "clock-output-names", 1, - &name); - if (err != -ENODATA) { - periph->gates[1] = clk_register_gate(NULL, name, np->name, 0, - periph->clk_ctrl, 1, 0, - &periph->clkact_lock); - if (WARN_ON(IS_ERR(periph->gates[1]))) - return; - clk_num++; - } - - periph->onecell_data.clks = periph->gates; - periph->onecell_data.clk_num = clk_num; - - err = of_clk_add_provider(np, of_clk_src_onecell_get, - &periph->onecell_data); - if (WARN_ON(err)) - return; -} -CLK_OF_DECLARE(zynq_periph, "xlnx,zynq-periph-clock", zynq_periph_clk_setup); - -/* CPU Clock domain is modelled as a mux with 4 children subclks, whose - * derivative rates depend on CLK_621_TRUE - */ - -struct zynq_cpu_clk { - struct clk_hw hw; - struct clk_onecell_data onecell_data; - struct clk *subclks[4]; - void __iomem *clk_ctrl; - spinlock_t clkact_lock; -}; - -#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw) - -static const u8 zynq_cpu_clk_parent_map[] = { - 1, 1, 2, 0 -}; -#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)]) -#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) - -static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw) -{ - struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); - return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl)); -} - -static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); - return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl)); -} - -static const struct clk_ops zynq_cpu_clk_ops = { - .get_parent = zynq_cpu_clk_get_parent, - .recalc_rate = zynq_cpu_clk_recalc_rate, -}; - -struct zynq_cpu_subclk { - struct clk_hw hw; - void __iomem *clk_621; - enum { - CPU_SUBCLK_6X4X, - CPU_SUBCLK_3X2X, - CPU_SUBCLK_2X, - CPU_SUBCLK_1X, - } which; -}; - -#define CLK_621_TRUE(x) ((x) & 1) - -#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw); - -static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - unsigned long uninitialized_var(rate); - struct zynq_cpu_subclk *subclk; - bool is_621; - - subclk = to_zynq_cpu_subclk(hw) - is_621 = CLK_621_TRUE(ioread32(subclk->clk_621)); - - switch (subclk->which) { - case CPU_SUBCLK_6X4X: - rate = parent_rate; - break; - case CPU_SUBCLK_3X2X: - rate = parent_rate / 2; - break; - case CPU_SUBCLK_2X: - rate = parent_rate / (is_621 ? 3 : 2); - break; - case CPU_SUBCLK_1X: - rate = parent_rate / (is_621 ? 6 : 4); - break; - }; - - return rate; -} - -static const struct clk_ops zynq_cpu_subclk_ops = { - .recalc_rate = zynq_cpu_subclk_recalc_rate, -}; - -static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which, - void __iomem *clk_621) -{ - struct zynq_cpu_subclk *subclk; - struct clk_init_data init; - struct clk *clk; - int err; - - err = of_property_read_string_index(np, "clock-output-names", - which, &init.name); - if (WARN_ON(err)) - goto err_read_output_name; - - subclk = kzalloc(sizeof(*subclk), GFP_KERNEL); - if (!subclk) - goto err_subclk_alloc; - - subclk->clk_621 = clk_621; - subclk->which = which; - - init.ops = &zynq_cpu_subclk_ops; - init.parent_names = &np->name; - init.num_parents = 1; - - subclk->hw.init = &init; - - clk = clk_register(NULL, &subclk->hw); - if (WARN_ON(IS_ERR(clk))) - goto err_clk_register; - - return clk; - -err_clk_register: - kfree(subclk); -err_subclk_alloc: -err_read_output_name: - return ERR_PTR(-EINVAL); -} - -static void __init zynq_cpu_clk_setup(struct device_node *np) -{ - struct zynq_cpu_clk *cpuclk; - const char *parent_names[3]; - struct clk_init_data init; - void __iomem *clk_621; - struct clk *clk; - u32 reg[2]; - int err; - int i; - - err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg)); - if (WARN_ON(err)) - return; - - cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL); - if (WARN_ON(!cpuclk)) - return; - - cpuclk->clk_ctrl = slcr_base + reg[0]; - clk_621 = slcr_base + reg[1]; - spin_lock_init(&cpuclk->clkact_lock); - - init.name = np->name; - init.ops = &zynq_cpu_clk_ops; - for (i = 0; i < ARRAY_SIZE(parent_names); i++) - parent_names[i] = of_clk_get_parent_name(np, i); - init.parent_names = parent_names; - init.num_parents = ARRAY_SIZE(parent_names); - - cpuclk->hw.init = &init; - - clk = clk_register(NULL, &cpuclk->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - err = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(err)) - return; - - for (i = 0; i < 4; i++) { - cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621); - if (WARN_ON(IS_ERR(cpuclk->subclks[i]))) - return; - } - - cpuclk->onecell_data.clks = cpuclk->subclks; - cpuclk->onecell_data.clk_num = i; - - err = of_clk_add_provider(np, of_clk_src_onecell_get, - &cpuclk->onecell_data); - if (WARN_ON(err)) - return; -} -CLK_OF_DECLARE(zynq_cpu, "xlnx,zynq-cpu-clock", zynq_cpu_clk_setup); - -void __init xilinx_zynq_clocks_init(void __iomem *slcr) -{ - slcr_base = slcr; - of_clk_init(NULL); -} diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig index 57323fd15ec..0b0f3e729cf 100644 --- a/drivers/clk/mvebu/Kconfig +++ b/drivers/clk/mvebu/Kconfig @@ -1,8 +1,23 @@ -config MVEBU_CLK_CORE - bool +config MVEBU_CLK_COMMON + bool config MVEBU_CLK_CPU - bool + bool -config MVEBU_CLK_GATING - bool +config ARMADA_370_CLK + bool + select MVEBU_CLK_COMMON + select MVEBU_CLK_CPU + +config ARMADA_XP_CLK + bool + select MVEBU_CLK_COMMON + select MVEBU_CLK_CPU + +config DOVE_CLK + bool + select MVEBU_CLK_COMMON + +config KIRKWOOD_CLK + bool + select MVEBU_CLK_COMMON diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile index 58df3dc4936..1c7e70c63fb 100644 --- a/drivers/clk/mvebu/Makefile +++ b/drivers/clk/mvebu/Makefile @@ -1,3 +1,7 @@ -obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o +obj-$(CONFIG_MVEBU_CLK_COMMON) += common.o obj-$(CONFIG_MVEBU_CLK_CPU) += clk-cpu.o -obj-$(CONFIG_MVEBU_CLK_GATING) += clk-gating-ctrl.o + +obj-$(CONFIG_ARMADA_370_CLK) += armada-370.o +obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o +obj-$(CONFIG_DOVE_CLK) += dove.o +obj-$(CONFIG_KIRKWOOD_CLK) += kirkwood.o diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c new file mode 100644 index 00000000000..079960e7c30 --- /dev/null +++ b/drivers/clk/mvebu/armada-370.c @@ -0,0 +1,176 @@ +/* + * Marvell Armada 370 SoC clocks + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include "common.h" + +/* + * Core Clocks + */ + +#define SARL 0 /* Low part [0:31] */ +#define SARL_A370_PCLK_FREQ_OPT 11 +#define SARL_A370_PCLK_FREQ_OPT_MASK 0xF +#define SARL_A370_FAB_FREQ_OPT 15 +#define SARL_A370_FAB_FREQ_OPT_MASK 0x1F +#define SARL_A370_TCLK_FREQ_OPT 20 +#define SARL_A370_TCLK_FREQ_OPT_MASK 0x1 + +enum { A370_CPU_TO_NBCLK, A370_CPU_TO_HCLK, A370_CPU_TO_DRAMCLK }; + +static const struct coreclk_ratio __initconst a370_coreclk_ratios[] = { + { .id = A370_CPU_TO_NBCLK, .name = "nbclk" }, + { .id = A370_CPU_TO_HCLK, .name = "hclk" }, + { .id = A370_CPU_TO_DRAMCLK, .name = "dramclk" }, +}; + +static const u32 __initconst a370_tclk_freqs[] = { + 16600000, + 20000000, +}; + +static u32 __init a370_get_tclk_freq(void __iomem *sar) +{ + u8 tclk_freq_select = 0; + + tclk_freq_select = ((readl(sar) >> SARL_A370_TCLK_FREQ_OPT) & + SARL_A370_TCLK_FREQ_OPT_MASK); + return a370_tclk_freqs[tclk_freq_select]; +} + +static const u32 __initconst a370_cpu_freqs[] = { + 400000000, + 533000000, + 667000000, + 800000000, + 1000000000, + 1067000000, + 1200000000, +}; + +static u32 __init a370_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) & + SARL_A370_PCLK_FREQ_OPT_MASK); + if (cpu_freq_select >= ARRAY_SIZE(a370_cpu_freqs)) { + pr_err("CPU freq select unsupported %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = a370_cpu_freqs[cpu_freq_select]; + + return cpu_freq; +} + +static const int __initconst a370_nbclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 2}, {2, 2}, + {1, 2}, {1, 2}, {1, 1}, {2, 3}, + {0, 1}, {1, 2}, {2, 4}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {2, 2}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst a370_hclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 6}, {2, 3}, + {1, 3}, {1, 4}, {1, 2}, {2, 6}, + {0, 1}, {1, 6}, {2, 10}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 2}, + {2, 6}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst a370_dramclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 3}, {2, 3}, + {1, 3}, {1, 2}, {1, 2}, {2, 6}, + {0, 1}, {1, 3}, {2, 5}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static void __init a370_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + u32 opt = ((readl(sar) >> SARL_A370_FAB_FREQ_OPT) & + SARL_A370_FAB_FREQ_OPT_MASK); + + switch (id) { + case A370_CPU_TO_NBCLK: + *mult = a370_nbclk_ratios[opt][0]; + *div = a370_nbclk_ratios[opt][1]; + break; + case A370_CPU_TO_HCLK: + *mult = a370_hclk_ratios[opt][0]; + *div = a370_hclk_ratios[opt][1]; + break; + case A370_CPU_TO_DRAMCLK: + *mult = a370_dramclk_ratios[opt][0]; + *div = a370_dramclk_ratios[opt][1]; + break; + } +} + +static const struct coreclk_soc_desc a370_coreclks = { + .get_tclk_freq = a370_get_tclk_freq, + .get_cpu_freq = a370_get_cpu_freq, + .get_clk_ratio = a370_get_clk_ratio, + .ratios = a370_coreclk_ratios, + .num_ratios = ARRAY_SIZE(a370_coreclk_ratios), +}; + +static void __init a370_coreclk_init(struct device_node *np) +{ + mvebu_coreclk_setup(np, &a370_coreclks); +} +CLK_OF_DECLARE(a370_core_clk, "marvell,armada-370-core-clock", + a370_coreclk_init); + +/* + * Clock Gating Control + */ + +static const struct clk_gating_soc_desc __initconst a370_gating_desc[] = { + { "audio", NULL, 0, 0 }, + { "pex0_en", NULL, 1, 0 }, + { "pex1_en", NULL, 2, 0 }, + { "ge1", NULL, 3, 0 }, + { "ge0", NULL, 4, 0 }, + { "pex0", "pex0_en", 5, 0 }, + { "pex1", "pex1_en", 9, 0 }, + { "sata0", NULL, 15, 0 }, + { "sdio", NULL, 17, 0 }, + { "tdm", NULL, 25, 0 }, + { "ddr", NULL, 28, CLK_IGNORE_UNUSED }, + { "sata1", NULL, 30, 0 }, + { } +}; + +static void __init a370_clk_gating_init(struct device_node *np) +{ + mvebu_clk_gating_setup(np, a370_gating_desc); +} +CLK_OF_DECLARE(a370_clk_gating, "marvell,armada-370-gating-clock", + a370_clk_gating_init); diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c new file mode 100644 index 00000000000..13b62ceb340 --- /dev/null +++ b/drivers/clk/mvebu/armada-xp.c @@ -0,0 +1,210 @@ +/* + * Marvell Armada XP SoC clocks + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include "common.h" + +/* + * Core Clocks + * + * Armada XP Sample At Reset is a 64 bit bitfiled split in two + * register of 32 bits + */ + +#define SARL 0 /* Low part [0:31] */ +#define SARL_AXP_PCLK_FREQ_OPT 21 +#define SARL_AXP_PCLK_FREQ_OPT_MASK 0x7 +#define SARL_AXP_FAB_FREQ_OPT 24 +#define SARL_AXP_FAB_FREQ_OPT_MASK 0xF +#define SARH 4 /* High part [32:63] */ +#define SARH_AXP_PCLK_FREQ_OPT (52-32) +#define SARH_AXP_PCLK_FREQ_OPT_MASK 0x1 +#define SARH_AXP_PCLK_FREQ_OPT_SHIFT 3 +#define SARH_AXP_FAB_FREQ_OPT (51-32) +#define SARH_AXP_FAB_FREQ_OPT_MASK 0x1 +#define SARH_AXP_FAB_FREQ_OPT_SHIFT 4 + +enum { AXP_CPU_TO_NBCLK, AXP_CPU_TO_HCLK, AXP_CPU_TO_DRAMCLK }; + +static const struct coreclk_ratio __initconst axp_coreclk_ratios[] = { + { .id = AXP_CPU_TO_NBCLK, .name = "nbclk" }, + { .id = AXP_CPU_TO_HCLK, .name = "hclk" }, + { .id = AXP_CPU_TO_DRAMCLK, .name = "dramclk" }, +}; + +/* Armada XP TCLK frequency is fixed to 250MHz */ +static u32 __init axp_get_tclk_freq(void __iomem *sar) +{ + return 250000000; +} + +static const u32 __initconst axp_cpu_freqs[] = { + 1000000000, + 1066000000, + 1200000000, + 1333000000, + 1500000000, + 1666000000, + 1800000000, + 2000000000, + 667000000, + 0, + 800000000, + 1600000000, +}; + +static u32 __init axp_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar + SARL) >> SARL_AXP_PCLK_FREQ_OPT) & + SARL_AXP_PCLK_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + cpu_freq_select |= (((readl(sar + SARH) >> SARH_AXP_PCLK_FREQ_OPT) & + SARH_AXP_PCLK_FREQ_OPT_MASK) << SARH_AXP_PCLK_FREQ_OPT_SHIFT); + if (cpu_freq_select >= ARRAY_SIZE(axp_cpu_freqs)) { + pr_err("CPU freq select unsupported: %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = axp_cpu_freqs[cpu_freq_select]; + + return cpu_freq; +} + +static const int __initconst axp_nbclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 2}, {2, 2}, + {1, 2}, {1, 2}, {1, 1}, {2, 3}, + {0, 1}, {1, 2}, {2, 4}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {2, 2}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst axp_hclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 6}, {2, 3}, + {1, 3}, {1, 4}, {1, 2}, {2, 6}, + {0, 1}, {1, 6}, {2, 10}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 2}, + {2, 6}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst axp_dramclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 3}, {2, 3}, + {1, 3}, {1, 2}, {1, 2}, {2, 6}, + {0, 1}, {1, 3}, {2, 5}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static void __init axp_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + u32 opt = ((readl(sar + SARL) >> SARL_AXP_FAB_FREQ_OPT) & + SARL_AXP_FAB_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + opt |= (((readl(sar + SARH) >> SARH_AXP_FAB_FREQ_OPT) & + SARH_AXP_FAB_FREQ_OPT_MASK) << SARH_AXP_FAB_FREQ_OPT_SHIFT); + + switch (id) { + case AXP_CPU_TO_NBCLK: + *mult = axp_nbclk_ratios[opt][0]; + *div = axp_nbclk_ratios[opt][1]; + break; + case AXP_CPU_TO_HCLK: + *mult = axp_hclk_ratios[opt][0]; + *div = axp_hclk_ratios[opt][1]; + break; + case AXP_CPU_TO_DRAMCLK: + *mult = axp_dramclk_ratios[opt][0]; + *div = axp_dramclk_ratios[opt][1]; + break; + } +} + +static const struct coreclk_soc_desc axp_coreclks = { + .get_tclk_freq = axp_get_tclk_freq, + .get_cpu_freq = axp_get_cpu_freq, + .get_clk_ratio = axp_get_clk_ratio, + .ratios = axp_coreclk_ratios, + .num_ratios = ARRAY_SIZE(axp_coreclk_ratios), +}; + +static void __init axp_coreclk_init(struct device_node *np) +{ + mvebu_coreclk_setup(np, &axp_coreclks); +} +CLK_OF_DECLARE(axp_core_clk, "marvell,armada-xp-core-clock", + axp_coreclk_init); + +/* + * Clock Gating Control + */ + +static const struct clk_gating_soc_desc __initconst axp_gating_desc[] = { + { "audio", NULL, 0, 0 }, + { "ge3", NULL, 1, 0 }, + { "ge2", NULL, 2, 0 }, + { "ge1", NULL, 3, 0 }, + { "ge0", NULL, 4, 0 }, + { "pex00", NULL, 5, 0 }, + { "pex01", NULL, 6, 0 }, + { "pex02", NULL, 7, 0 }, + { "pex03", NULL, 8, 0 }, + { "pex10", NULL, 9, 0 }, + { "pex11", NULL, 10, 0 }, + { "pex12", NULL, 11, 0 }, + { "pex13", NULL, 12, 0 }, + { "bp", NULL, 13, 0 }, + { "sata0lnk", NULL, 14, 0 }, + { "sata0", "sata0lnk", 15, 0 }, + { "lcd", NULL, 16, 0 }, + { "sdio", NULL, 17, 0 }, + { "usb0", NULL, 18, 0 }, + { "usb1", NULL, 19, 0 }, + { "usb2", NULL, 20, 0 }, + { "xor0", NULL, 22, 0 }, + { "crypto", NULL, 23, 0 }, + { "tdm", NULL, 25, 0 }, + { "pex20", NULL, 26, 0 }, + { "pex30", NULL, 27, 0 }, + { "xor1", NULL, 28, 0 }, + { "sata1lnk", NULL, 29, 0 }, + { "sata1", "sata1lnk", 30, 0 }, + { } +}; + +static void __init axp_clk_gating_init(struct device_node *np) +{ + mvebu_clk_gating_setup(np, axp_gating_desc); +} +CLK_OF_DECLARE(axp_clk_gating, "marvell,armada-xp-gating-clock", + axp_clk_gating_init); diff --git a/drivers/clk/mvebu/clk-core.c b/drivers/clk/mvebu/clk-core.c deleted file mode 100644 index 0a53edbae8b..00000000000 --- a/drivers/clk/mvebu/clk-core.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * Marvell EBU clock core handling defined at reset - * - * Copyright (C) 2012 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> -#include <linux/of_address.h> -#include <linux/io.h> -#include <linux/of.h> -#include "clk-core.h" - -struct core_ratio { - int id; - const char *name; -}; - -struct core_clocks { - u32 (*get_tclk_freq)(void __iomem *sar); - u32 (*get_cpu_freq)(void __iomem *sar); - void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); - const struct core_ratio *ratios; - int num_ratios; -}; - -static struct clk_onecell_data clk_data; - -static void __init mvebu_clk_core_setup(struct device_node *np, - struct core_clocks *coreclk) -{ - const char *tclk_name = "tclk"; - const char *cpuclk_name = "cpuclk"; - void __iomem *base; - unsigned long rate; - int n; - - base = of_iomap(np, 0); - if (WARN_ON(!base)) - return; - - /* - * Allocate struct for TCLK, cpu clk, and core ratio clocks - */ - clk_data.clk_num = 2 + coreclk->num_ratios; - clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *), - GFP_KERNEL); - if (WARN_ON(!clk_data.clks)) - return; - - /* - * Register TCLK - */ - of_property_read_string_index(np, "clock-output-names", 0, - &tclk_name); - rate = coreclk->get_tclk_freq(base); - clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL, - CLK_IS_ROOT, rate); - WARN_ON(IS_ERR(clk_data.clks[0])); - - /* - * Register CPU clock - */ - of_property_read_string_index(np, "clock-output-names", 1, - &cpuclk_name); - rate = coreclk->get_cpu_freq(base); - clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, - CLK_IS_ROOT, rate); - WARN_ON(IS_ERR(clk_data.clks[1])); - - /* - * Register fixed-factor clocks derived from CPU clock - */ - for (n = 0; n < coreclk->num_ratios; n++) { - const char *rclk_name = coreclk->ratios[n].name; - int mult, div; - - of_property_read_string_index(np, "clock-output-names", - 2+n, &rclk_name); - coreclk->get_clk_ratio(base, coreclk->ratios[n].id, - &mult, &div); - clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name, - cpuclk_name, 0, mult, div); - WARN_ON(IS_ERR(clk_data.clks[2+n])); - }; - - /* - * SAR register isn't needed anymore - */ - iounmap(base); - - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -} - -#ifdef CONFIG_MACH_ARMADA_370_XP -/* - * Armada 370/XP Sample At Reset is a 64 bit bitfiled split in two - * register of 32 bits - */ - -#define SARL 0 /* Low part [0:31] */ -#define SARL_AXP_PCLK_FREQ_OPT 21 -#define SARL_AXP_PCLK_FREQ_OPT_MASK 0x7 -#define SARL_A370_PCLK_FREQ_OPT 11 -#define SARL_A370_PCLK_FREQ_OPT_MASK 0xF -#define SARL_AXP_FAB_FREQ_OPT 24 -#define SARL_AXP_FAB_FREQ_OPT_MASK 0xF -#define SARL_A370_FAB_FREQ_OPT 15 -#define SARL_A370_FAB_FREQ_OPT_MASK 0x1F -#define SARL_A370_TCLK_FREQ_OPT 20 -#define SARL_A370_TCLK_FREQ_OPT_MASK 0x1 -#define SARH 4 /* High part [32:63] */ -#define SARH_AXP_PCLK_FREQ_OPT (52-32) -#define SARH_AXP_PCLK_FREQ_OPT_MASK 0x1 -#define SARH_AXP_PCLK_FREQ_OPT_SHIFT 3 -#define SARH_AXP_FAB_FREQ_OPT (51-32) -#define SARH_AXP_FAB_FREQ_OPT_MASK 0x1 -#define SARH_AXP_FAB_FREQ_OPT_SHIFT 4 - -static const u32 __initconst armada_370_tclk_frequencies[] = { - 16600000, - 20000000, -}; - -static u32 __init armada_370_get_tclk_freq(void __iomem *sar) -{ - u8 tclk_freq_select = 0; - - tclk_freq_select = ((readl(sar) >> SARL_A370_TCLK_FREQ_OPT) & - SARL_A370_TCLK_FREQ_OPT_MASK); - return armada_370_tclk_frequencies[tclk_freq_select]; -} - -static const u32 __initconst armada_370_cpu_frequencies[] = { - 400000000, - 533000000, - 667000000, - 800000000, - 1000000000, - 1067000000, - 1200000000, -}; - -static u32 __init armada_370_get_cpu_freq(void __iomem *sar) -{ - u32 cpu_freq; - u8 cpu_freq_select = 0; - - cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) & - SARL_A370_PCLK_FREQ_OPT_MASK); - if (cpu_freq_select >= ARRAY_SIZE(armada_370_cpu_frequencies)) { - pr_err("CPU freq select unsupported %d\n", cpu_freq_select); - cpu_freq = 0; - } else - cpu_freq = armada_370_cpu_frequencies[cpu_freq_select]; - - return cpu_freq; -} - -enum { A370_XP_NBCLK, A370_XP_HCLK, A370_XP_DRAMCLK }; - -static const struct core_ratio __initconst armada_370_xp_core_ratios[] = { - { .id = A370_XP_NBCLK, .name = "nbclk" }, - { .id = A370_XP_HCLK, .name = "hclk" }, - { .id = A370_XP_DRAMCLK, .name = "dramclk" }, -}; - -static const int __initconst armada_370_xp_nbclk_ratios[32][2] = { - {0, 1}, {1, 2}, {2, 2}, {2, 2}, - {1, 2}, {1, 2}, {1, 1}, {2, 3}, - {0, 1}, {1, 2}, {2, 4}, {0, 1}, - {1, 2}, {0, 1}, {0, 1}, {2, 2}, - {0, 1}, {0, 1}, {0, 1}, {1, 1}, - {2, 3}, {0, 1}, {0, 1}, {0, 1}, - {0, 1}, {0, 1}, {0, 1}, {1, 1}, - {0, 1}, {0, 1}, {0, 1}, {0, 1}, -}; - -static const int __initconst armada_370_xp_hclk_ratios[32][2] = { - {0, 1}, {1, 2}, {2, 6}, {2, 3}, - {1, 3}, {1, 4}, {1, 2}, {2, 6}, - {0, 1}, {1, 6}, {2, 10}, {0, 1}, - {1, 4}, {0, 1}, {0, 1}, {2, 5}, - {0, 1}, {0, 1}, {0, 1}, {1, 2}, - {2, 6}, {0, 1}, {0, 1}, {0, 1}, - {0, 1}, {0, 1}, {0, 1}, {1, 1}, - {0, 1}, {0, 1}, {0, 1}, {0, 1}, -}; - -static const int __initconst armada_370_xp_dramclk_ratios[32][2] = { - {0, 1}, {1, 2}, {2, 3}, {2, 3}, - {1, 3}, {1, 2}, {1, 2}, {2, 6}, - {0, 1}, {1, 3}, {2, 5}, {0, 1}, - {1, 4}, {0, 1}, {0, 1}, {2, 5}, - {0, 1}, {0, 1}, {0, 1}, {1, 1}, - {2, 3}, {0, 1}, {0, 1}, {0, 1}, - {0, 1}, {0, 1}, {0, 1}, {1, 1}, - {0, 1}, {0, 1}, {0, 1}, {0, 1}, -}; - -static void __init armada_370_xp_get_clk_ratio(u32 opt, - void __iomem *sar, int id, int *mult, int *div) -{ - switch (id) { - case A370_XP_NBCLK: - *mult = armada_370_xp_nbclk_ratios[opt][0]; - *div = armada_370_xp_nbclk_ratios[opt][1]; - break; - case A370_XP_HCLK: - *mult = armada_370_xp_hclk_ratios[opt][0]; - *div = armada_370_xp_hclk_ratios[opt][1]; - break; - case A370_XP_DRAMCLK: - *mult = armada_370_xp_dramclk_ratios[opt][0]; - *div = armada_370_xp_dramclk_ratios[opt][1]; - break; - } -} - -static void __init armada_370_get_clk_ratio( - void __iomem *sar, int id, int *mult, int *div) -{ - u32 opt = ((readl(sar) >> SARL_A370_FAB_FREQ_OPT) & - SARL_A370_FAB_FREQ_OPT_MASK); - - armada_370_xp_get_clk_ratio(opt, sar, id, mult, div); -} - - -static const struct core_clocks armada_370_core_clocks = { - .get_tclk_freq = armada_370_get_tclk_freq, - .get_cpu_freq = armada_370_get_cpu_freq, - .get_clk_ratio = armada_370_get_clk_ratio, - .ratios = armada_370_xp_core_ratios, - .num_ratios = ARRAY_SIZE(armada_370_xp_core_ratios), -}; - -static const u32 __initconst armada_xp_cpu_frequencies[] = { - 1000000000, - 1066000000, - 1200000000, - 1333000000, - 1500000000, - 1666000000, - 1800000000, - 2000000000, - 667000000, - 0, - 800000000, - 1600000000, -}; - -/* For Armada XP TCLK frequency is fix: 250MHz */ -static u32 __init armada_xp_get_tclk_freq(void __iomem *sar) -{ - return 250 * 1000 * 1000; -} - -static u32 __init armada_xp_get_cpu_freq(void __iomem *sar) -{ - u32 cpu_freq; - u8 cpu_freq_select = 0; - - cpu_freq_select = ((readl(sar) >> SARL_AXP_PCLK_FREQ_OPT) & - SARL_AXP_PCLK_FREQ_OPT_MASK); - /* - * The upper bit is not contiguous to the other ones and - * located in the high part of the SAR registers - */ - cpu_freq_select |= (((readl(sar+4) >> SARH_AXP_PCLK_FREQ_OPT) & - SARH_AXP_PCLK_FREQ_OPT_MASK) - << SARH_AXP_PCLK_FREQ_OPT_SHIFT); - if (cpu_freq_select >= ARRAY_SIZE(armada_xp_cpu_frequencies)) { - pr_err("CPU freq select unsupported: %d\n", cpu_freq_select); - cpu_freq = 0; - } else - cpu_freq = armada_xp_cpu_frequencies[cpu_freq_select]; - - return cpu_freq; -} - -static void __init armada_xp_get_clk_ratio( - void __iomem *sar, int id, int *mult, int *div) -{ - - u32 opt = ((readl(sar) >> SARL_AXP_FAB_FREQ_OPT) & - SARL_AXP_FAB_FREQ_OPT_MASK); - /* - * The upper bit is not contiguous to the other ones and - * located in the high part of the SAR registers - */ - opt |= (((readl(sar+4) >> SARH_AXP_FAB_FREQ_OPT) & - SARH_AXP_FAB_FREQ_OPT_MASK) - << SARH_AXP_FAB_FREQ_OPT_SHIFT); - - armada_370_xp_get_clk_ratio(opt, sar, id, mult, div); -} - -static const struct core_clocks armada_xp_core_clocks = { - .get_tclk_freq = armada_xp_get_tclk_freq, - .get_cpu_freq = armada_xp_get_cpu_freq, - .get_clk_ratio = armada_xp_get_clk_ratio, - .ratios = armada_370_xp_core_ratios, - .num_ratios = ARRAY_SIZE(armada_370_xp_core_ratios), -}; - -#endif /* CONFIG_MACH_ARMADA_370_XP */ - -/* - * Dove PLL sample-at-reset configuration - * - * SAR0[8:5] : CPU frequency - * 5 = 1000 MHz - * 6 = 933 MHz - * 7 = 933 MHz - * 8 = 800 MHz - * 9 = 800 MHz - * 10 = 800 MHz - * 11 = 1067 MHz - * 12 = 667 MHz - * 13 = 533 MHz - * 14 = 400 MHz - * 15 = 333 MHz - * others reserved. - * - * SAR0[11:9] : CPU to L2 Clock divider ratio - * 0 = (1/1) * CPU - * 2 = (1/2) * CPU - * 4 = (1/3) * CPU - * 6 = (1/4) * CPU - * others reserved. - * - * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio - * 0 = (1/1) * CPU - * 2 = (1/2) * CPU - * 3 = (2/5) * CPU - * 4 = (1/3) * CPU - * 6 = (1/4) * CPU - * 8 = (1/5) * CPU - * 10 = (1/6) * CPU - * 12 = (1/7) * CPU - * 14 = (1/8) * CPU - * 15 = (1/10) * CPU - * others reserved. - * - * SAR0[24:23] : TCLK frequency - * 0 = 166 MHz - * 1 = 125 MHz - * others reserved. - */ -#ifdef CONFIG_ARCH_DOVE -#define SAR_DOVE_CPU_FREQ 5 -#define SAR_DOVE_CPU_FREQ_MASK 0xf -#define SAR_DOVE_L2_RATIO 9 -#define SAR_DOVE_L2_RATIO_MASK 0x7 -#define SAR_DOVE_DDR_RATIO 12 -#define SAR_DOVE_DDR_RATIO_MASK 0xf -#define SAR_DOVE_TCLK_FREQ 23 -#define SAR_DOVE_TCLK_FREQ_MASK 0x3 - -static const u32 __initconst dove_tclk_frequencies[] = { - 166666667, - 125000000, - 0, 0 -}; - -static u32 __init dove_get_tclk_freq(void __iomem *sar) -{ - u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) & - SAR_DOVE_TCLK_FREQ_MASK; - return dove_tclk_frequencies[opt]; -} - -static const u32 __initconst dove_cpu_frequencies[] = { - 0, 0, 0, 0, 0, - 1000000000, - 933333333, 933333333, - 800000000, 800000000, 800000000, - 1066666667, - 666666667, - 533333333, - 400000000, - 333333333 -}; - -static u32 __init dove_get_cpu_freq(void __iomem *sar) -{ - u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) & - SAR_DOVE_CPU_FREQ_MASK; - return dove_cpu_frequencies[opt]; -} - -enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR }; - -static const struct core_ratio __initconst dove_core_ratios[] = { - { .id = DOVE_CPU_TO_L2, .name = "l2clk", }, - { .id = DOVE_CPU_TO_DDR, .name = "ddrclk", } -}; - -static const int __initconst dove_cpu_l2_ratios[8][2] = { - { 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, - { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 } -}; - -static const int __initconst dove_cpu_ddr_ratios[16][2] = { - { 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 }, - { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }, - { 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 }, - { 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 } -}; - -static void __init dove_get_clk_ratio( - void __iomem *sar, int id, int *mult, int *div) -{ - switch (id) { - case DOVE_CPU_TO_L2: - { - u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) & - SAR_DOVE_L2_RATIO_MASK; - *mult = dove_cpu_l2_ratios[opt][0]; - *div = dove_cpu_l2_ratios[opt][1]; - break; - } - case DOVE_CPU_TO_DDR: - { - u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) & - SAR_DOVE_DDR_RATIO_MASK; - *mult = dove_cpu_ddr_ratios[opt][0]; - *div = dove_cpu_ddr_ratios[opt][1]; - break; - } - } -} - -static const struct core_clocks dove_core_clocks = { - .get_tclk_freq = dove_get_tclk_freq, - .get_cpu_freq = dove_get_cpu_freq, - .get_clk_ratio = dove_get_clk_ratio, - .ratios = dove_core_ratios, - .num_ratios = ARRAY_SIZE(dove_core_ratios), -}; -#endif /* CONFIG_ARCH_DOVE */ - -/* - * Kirkwood PLL sample-at-reset configuration - * (6180 has different SAR layout than other Kirkwood SoCs) - * - * SAR0[4:3,22,1] : CPU frequency (6281,6292,6282) - * 4 = 600 MHz - * 6 = 800 MHz - * 7 = 1000 MHz - * 9 = 1200 MHz - * 12 = 1500 MHz - * 13 = 1600 MHz - * 14 = 1800 MHz - * 15 = 2000 MHz - * others reserved. - * - * SAR0[19,10:9] : CPU to L2 Clock divider ratio (6281,6292,6282) - * 1 = (1/2) * CPU - * 3 = (1/3) * CPU - * 5 = (1/4) * CPU - * others reserved. - * - * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282) - * 2 = (1/2) * CPU - * 4 = (1/3) * CPU - * 6 = (1/4) * CPU - * 7 = (2/9) * CPU - * 8 = (1/5) * CPU - * 9 = (1/6) * CPU - * others reserved. - * - * SAR0[4:2] : Kirkwood 6180 cpu/l2/ddr clock configuration (6180 only) - * 5 = [CPU = 600 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/3) * CPU] - * 6 = [CPU = 800 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/4) * CPU] - * 7 = [CPU = 1000 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/5) * CPU] - * others reserved. - * - * SAR0[21] : TCLK frequency - * 0 = 200 MHz - * 1 = 166 MHz - * others reserved. - */ -#ifdef CONFIG_ARCH_KIRKWOOD -#define SAR_KIRKWOOD_CPU_FREQ(x) \ - (((x & (1 << 1)) >> 1) | \ - ((x & (1 << 22)) >> 21) | \ - ((x & (3 << 3)) >> 1)) -#define SAR_KIRKWOOD_L2_RATIO(x) \ - (((x & (3 << 9)) >> 9) | \ - (((x & (1 << 19)) >> 17))) -#define SAR_KIRKWOOD_DDR_RATIO 5 -#define SAR_KIRKWOOD_DDR_RATIO_MASK 0xf -#define SAR_MV88F6180_CLK 2 -#define SAR_MV88F6180_CLK_MASK 0x7 -#define SAR_KIRKWOOD_TCLK_FREQ 21 -#define SAR_KIRKWOOD_TCLK_FREQ_MASK 0x1 - -enum { KIRKWOOD_CPU_TO_L2, KIRKWOOD_CPU_TO_DDR }; - -static const struct core_ratio __initconst kirkwood_core_ratios[] = { - { .id = KIRKWOOD_CPU_TO_L2, .name = "l2clk", }, - { .id = KIRKWOOD_CPU_TO_DDR, .name = "ddrclk", } -}; - -static u32 __init kirkwood_get_tclk_freq(void __iomem *sar) -{ - u32 opt = (readl(sar) >> SAR_KIRKWOOD_TCLK_FREQ) & - SAR_KIRKWOOD_TCLK_FREQ_MASK; - return (opt) ? 166666667 : 200000000; -} - -static const u32 __initconst kirkwood_cpu_frequencies[] = { - 0, 0, 0, 0, - 600000000, - 0, - 800000000, - 1000000000, - 0, - 1200000000, - 0, 0, - 1500000000, - 1600000000, - 1800000000, - 2000000000 -}; - -static u32 __init kirkwood_get_cpu_freq(void __iomem *sar) -{ - u32 opt = SAR_KIRKWOOD_CPU_FREQ(readl(sar)); - return kirkwood_cpu_frequencies[opt]; -} - -static const int __initconst kirkwood_cpu_l2_ratios[8][2] = { - { 0, 1 }, { 1, 2 }, { 0, 1 }, { 1, 3 }, - { 0, 1 }, { 1, 4 }, { 0, 1 }, { 0, 1 } -}; - -static const int __initconst kirkwood_cpu_ddr_ratios[16][2] = { - { 0, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, - { 1, 3 }, { 0, 1 }, { 1, 4 }, { 2, 9 }, - { 1, 5 }, { 1, 6 }, { 0, 1 }, { 0, 1 }, - { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 } -}; - -static void __init kirkwood_get_clk_ratio( - void __iomem *sar, int id, int *mult, int *div) -{ - switch (id) { - case KIRKWOOD_CPU_TO_L2: - { - u32 opt = SAR_KIRKWOOD_L2_RATIO(readl(sar)); - *mult = kirkwood_cpu_l2_ratios[opt][0]; - *div = kirkwood_cpu_l2_ratios[opt][1]; - break; - } - case KIRKWOOD_CPU_TO_DDR: - { - u32 opt = (readl(sar) >> SAR_KIRKWOOD_DDR_RATIO) & - SAR_KIRKWOOD_DDR_RATIO_MASK; - *mult = kirkwood_cpu_ddr_ratios[opt][0]; - *div = kirkwood_cpu_ddr_ratios[opt][1]; - break; - } - } -} - -static const struct core_clocks kirkwood_core_clocks = { - .get_tclk_freq = kirkwood_get_tclk_freq, - .get_cpu_freq = kirkwood_get_cpu_freq, - .get_clk_ratio = kirkwood_get_clk_ratio, - .ratios = kirkwood_core_ratios, - .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), -}; - -static const u32 __initconst mv88f6180_cpu_frequencies[] = { - 0, 0, 0, 0, 0, - 600000000, - 800000000, - 1000000000 -}; - -static u32 __init mv88f6180_get_cpu_freq(void __iomem *sar) -{ - u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & SAR_MV88F6180_CLK_MASK; - return mv88f6180_cpu_frequencies[opt]; -} - -static const int __initconst mv88f6180_cpu_ddr_ratios[8][2] = { - { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 }, - { 0, 1 }, { 1, 3 }, { 1, 4 }, { 1, 5 } -}; - -static void __init mv88f6180_get_clk_ratio( - void __iomem *sar, int id, int *mult, int *div) -{ - switch (id) { - case KIRKWOOD_CPU_TO_L2: - { - /* mv88f6180 has a fixed 1:2 CPU-to-L2 ratio */ - *mult = 1; - *div = 2; - break; - } - case KIRKWOOD_CPU_TO_DDR: - { - u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & - SAR_MV88F6180_CLK_MASK; - *mult = mv88f6180_cpu_ddr_ratios[opt][0]; - *div = mv88f6180_cpu_ddr_ratios[opt][1]; - break; - } - } -} - -static const struct core_clocks mv88f6180_core_clocks = { - .get_tclk_freq = kirkwood_get_tclk_freq, - .get_cpu_freq = mv88f6180_get_cpu_freq, - .get_clk_ratio = mv88f6180_get_clk_ratio, - .ratios = kirkwood_core_ratios, - .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), -}; -#endif /* CONFIG_ARCH_KIRKWOOD */ - -static const __initdata struct of_device_id clk_core_match[] = { -#ifdef CONFIG_MACH_ARMADA_370_XP - { - .compatible = "marvell,armada-370-core-clock", - .data = &armada_370_core_clocks, - }, - { - .compatible = "marvell,armada-xp-core-clock", - .data = &armada_xp_core_clocks, - }, -#endif -#ifdef CONFIG_ARCH_DOVE - { - .compatible = "marvell,dove-core-clock", - .data = &dove_core_clocks, - }, -#endif - -#ifdef CONFIG_ARCH_KIRKWOOD - { - .compatible = "marvell,kirkwood-core-clock", - .data = &kirkwood_core_clocks, - }, - { - .compatible = "marvell,mv88f6180-core-clock", - .data = &mv88f6180_core_clocks, - }, -#endif - - { } -}; - -void __init mvebu_core_clk_init(void) -{ - struct device_node *np; - - for_each_matching_node(np, clk_core_match) { - const struct of_device_id *match = - of_match_node(clk_core_match, np); - mvebu_clk_core_setup(np, (struct core_clocks *)match->data); - } -} diff --git a/drivers/clk/mvebu/clk-core.h b/drivers/clk/mvebu/clk-core.h deleted file mode 100644 index 28b5e02e988..00000000000 --- a/drivers/clk/mvebu/clk-core.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * * Marvell EBU clock core handling defined at reset - * - * Copyright (C) 2012 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MVEBU_CLK_CORE_H -#define __MVEBU_CLK_CORE_H - -void __init mvebu_core_clk_init(void); - -#endif diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c deleted file mode 100644 index ebf141d4374..00000000000 --- a/drivers/clk/mvebu/clk-gating-ctrl.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * Marvell MVEBU clock gating control. - * - * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/kernel.h> -#include <linux/bitops.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> -#include <linux/clk/mvebu.h> -#include <linux/of.h> -#include <linux/of_address.h> - -struct mvebu_gating_ctrl { - spinlock_t lock; - struct clk **gates; - int num_gates; -}; - -struct mvebu_soc_descr { - const char *name; - const char *parent; - int bit_idx; -}; - -#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) - -static struct clk *mvebu_clk_gating_get_src( - struct of_phandle_args *clkspec, void *data) -{ - struct mvebu_gating_ctrl *ctrl = (struct mvebu_gating_ctrl *)data; - int n; - - if (clkspec->args_count < 1) - return ERR_PTR(-EINVAL); - - for (n = 0; n < ctrl->num_gates; n++) { - struct clk_gate *gate = - to_clk_gate(__clk_get_hw(ctrl->gates[n])); - if (clkspec->args[0] == gate->bit_idx) - return ctrl->gates[n]; - } - return ERR_PTR(-ENODEV); -} - -static void __init mvebu_clk_gating_setup( - struct device_node *np, const struct mvebu_soc_descr *descr) -{ - struct mvebu_gating_ctrl *ctrl; - struct clk *clk; - void __iomem *base; - const char *default_parent = NULL; - int n; - - base = of_iomap(np, 0); - - clk = of_clk_get(np, 0); - if (!IS_ERR(clk)) { - default_parent = __clk_get_name(clk); - clk_put(clk); - } - - ctrl = kzalloc(sizeof(struct mvebu_gating_ctrl), GFP_KERNEL); - if (WARN_ON(!ctrl)) - return; - - spin_lock_init(&ctrl->lock); - - /* - * Count, allocate, and register clock gates - */ - for (n = 0; descr[n].name;) - n++; - - ctrl->num_gates = n; - ctrl->gates = kzalloc(ctrl->num_gates * sizeof(struct clk *), - GFP_KERNEL); - if (WARN_ON(!ctrl->gates)) { - kfree(ctrl); - return; - } - - for (n = 0; n < ctrl->num_gates; n++) { - u8 flags = 0; - const char *parent = - (descr[n].parent) ? descr[n].parent : default_parent; - - /* - * On Armada 370, the DDR clock is a special case: it - * isn't taken by any driver, but should anyway be - * kept enabled, so we mark it as IGNORE_UNUSED for - * now. - */ - if (!strcmp(descr[n].name, "ddr")) - flags |= CLK_IGNORE_UNUSED; - - ctrl->gates[n] = clk_register_gate(NULL, descr[n].name, parent, - flags, base, descr[n].bit_idx, 0, &ctrl->lock); - WARN_ON(IS_ERR(ctrl->gates[n])); - } - of_clk_add_provider(np, mvebu_clk_gating_get_src, ctrl); -} - -/* - * SoC specific clock gating control - */ - -#ifdef CONFIG_MACH_ARMADA_370 -static const struct mvebu_soc_descr __initconst armada_370_gating_descr[] = { - { "audio", NULL, 0 }, - { "pex0_en", NULL, 1 }, - { "pex1_en", NULL, 2 }, - { "ge1", NULL, 3 }, - { "ge0", NULL, 4 }, - { "pex0", NULL, 5 }, - { "pex1", NULL, 9 }, - { "sata0", NULL, 15 }, - { "sdio", NULL, 17 }, - { "tdm", NULL, 25 }, - { "ddr", NULL, 28 }, - { "sata1", NULL, 30 }, - { } -}; -#endif - -#ifdef CONFIG_MACH_ARMADA_XP -static const struct mvebu_soc_descr __initconst armada_xp_gating_descr[] = { - { "audio", NULL, 0 }, - { "ge3", NULL, 1 }, - { "ge2", NULL, 2 }, - { "ge1", NULL, 3 }, - { "ge0", NULL, 4 }, - { "pex0", NULL, 5 }, - { "pex1", NULL, 6 }, - { "pex2", NULL, 7 }, - { "pex3", NULL, 8 }, - { "bp", NULL, 13 }, - { "sata0lnk", NULL, 14 }, - { "sata0", "sata0lnk", 15 }, - { "lcd", NULL, 16 }, - { "sdio", NULL, 17 }, - { "usb0", NULL, 18 }, - { "usb1", NULL, 19 }, - { "usb2", NULL, 20 }, - { "xor0", NULL, 22 }, - { "crypto", NULL, 23 }, - { "tdm", NULL, 25 }, - { "xor1", NULL, 28 }, - { "sata1lnk", NULL, 29 }, - { "sata1", "sata1lnk", 30 }, - { } -}; -#endif - -#ifdef CONFIG_ARCH_DOVE -static const struct mvebu_soc_descr __initconst dove_gating_descr[] = { - { "usb0", NULL, 0 }, - { "usb1", NULL, 1 }, - { "ge", "gephy", 2 }, - { "sata", NULL, 3 }, - { "pex0", NULL, 4 }, - { "pex1", NULL, 5 }, - { "sdio0", NULL, 8 }, - { "sdio1", NULL, 9 }, - { "nand", NULL, 10 }, - { "camera", NULL, 11 }, - { "i2s0", NULL, 12 }, - { "i2s1", NULL, 13 }, - { "crypto", NULL, 15 }, - { "ac97", NULL, 21 }, - { "pdma", NULL, 22 }, - { "xor0", NULL, 23 }, - { "xor1", NULL, 24 }, - { "gephy", NULL, 30 }, - { } -}; -#endif - -#ifdef CONFIG_ARCH_KIRKWOOD -static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = { - { "ge0", NULL, 0 }, - { "pex0", NULL, 2 }, - { "usb0", NULL, 3 }, - { "sdio", NULL, 4 }, - { "tsu", NULL, 5 }, - { "runit", NULL, 7 }, - { "xor0", NULL, 8 }, - { "audio", NULL, 9 }, - { "powersave", "cpuclk", 11 }, - { "sata0", NULL, 14 }, - { "sata1", NULL, 15 }, - { "xor1", NULL, 16 }, - { "crypto", NULL, 17 }, - { "pex1", NULL, 18 }, - { "ge1", NULL, 19 }, - { "tdm", NULL, 20 }, - { } -}; -#endif - -static const __initdata struct of_device_id clk_gating_match[] = { -#ifdef CONFIG_MACH_ARMADA_370 - { - .compatible = "marvell,armada-370-gating-clock", - .data = armada_370_gating_descr, - }, -#endif - -#ifdef CONFIG_MACH_ARMADA_XP - { - .compatible = "marvell,armada-xp-gating-clock", - .data = armada_xp_gating_descr, - }, -#endif - -#ifdef CONFIG_ARCH_DOVE - { - .compatible = "marvell,dove-gating-clock", - .data = dove_gating_descr, - }, -#endif - -#ifdef CONFIG_ARCH_KIRKWOOD - { - .compatible = "marvell,kirkwood-gating-clock", - .data = kirkwood_gating_descr, - }, -#endif - - { } -}; - -void __init mvebu_gating_clk_init(void) -{ - struct device_node *np; - - for_each_matching_node(np, clk_gating_match) { - const struct of_device_id *match = - of_match_node(clk_gating_match, np); - mvebu_clk_gating_setup(np, - (const struct mvebu_soc_descr *)match->data); - } -} diff --git a/drivers/clk/mvebu/clk-gating-ctrl.h b/drivers/clk/mvebu/clk-gating-ctrl.h deleted file mode 100644 index 9275d1e51f1..00000000000 --- a/drivers/clk/mvebu/clk-gating-ctrl.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Marvell EBU gating clock handling - * - * Copyright (C) 2012 Marvell - * - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MVEBU_CLK_GATING_H -#define __MVEBU_CLK_GATING_H - -#ifdef CONFIG_MVEBU_CLK_GATING -void __init mvebu_gating_clk_init(void); -#else -void mvebu_gating_clk_init(void) {} -#endif - -#endif diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c deleted file mode 100644 index 29f10fb3006..00000000000 --- a/drivers/clk/mvebu/clk.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Marvell EBU SoC clock handling. - * - * Copyright (C) 2012 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/kernel.h> -#include <linux/clk-provider.h> -#include <linux/of.h> -#include "clk-core.h" -#include "clk-gating-ctrl.h" - -void __init mvebu_clocks_init(void) -{ - mvebu_core_clk_init(); - mvebu_gating_clk_init(); - of_clk_init(NULL); -} diff --git a/drivers/clk/mvebu/common.c b/drivers/clk/mvebu/common.c new file mode 100644 index 00000000000..adaa4a1821b --- /dev/null +++ b/drivers/clk/mvebu/common.c @@ -0,0 +1,163 @@ +/* + * Marvell EBU SoC common clock handling + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "common.h" + +/* + * Core Clocks + */ + +static struct clk_onecell_data clk_data; + +void __init mvebu_coreclk_setup(struct device_node *np, + const struct coreclk_soc_desc *desc) +{ + const char *tclk_name = "tclk"; + const char *cpuclk_name = "cpuclk"; + void __iomem *base; + unsigned long rate; + int n; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* Allocate struct for TCLK, cpu clk, and core ratio clocks */ + clk_data.clk_num = 2 + desc->num_ratios; + clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!clk_data.clks)) + return; + + /* Register TCLK */ + of_property_read_string_index(np, "clock-output-names", 0, + &tclk_name); + rate = desc->get_tclk_freq(base); + clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[0])); + + /* Register CPU clock */ + of_property_read_string_index(np, "clock-output-names", 1, + &cpuclk_name); + rate = desc->get_cpu_freq(base); + clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[1])); + + /* Register fixed-factor clocks derived from CPU clock */ + for (n = 0; n < desc->num_ratios; n++) { + const char *rclk_name = desc->ratios[n].name; + int mult, div; + + of_property_read_string_index(np, "clock-output-names", + 2+n, &rclk_name); + desc->get_clk_ratio(base, desc->ratios[n].id, &mult, &div); + clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name, + cpuclk_name, 0, mult, div); + WARN_ON(IS_ERR(clk_data.clks[2+n])); + }; + + /* SAR register isn't needed anymore */ + iounmap(base); + + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +/* + * Clock Gating Control + */ + +struct clk_gating_ctrl { + spinlock_t lock; + struct clk **gates; + int num_gates; +}; + +#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) + +static struct clk *clk_gating_get_src( + struct of_phandle_args *clkspec, void *data) +{ + struct clk_gating_ctrl *ctrl = (struct clk_gating_ctrl *)data; + int n; + + if (clkspec->args_count < 1) + return ERR_PTR(-EINVAL); + + for (n = 0; n < ctrl->num_gates; n++) { + struct clk_gate *gate = + to_clk_gate(__clk_get_hw(ctrl->gates[n])); + if (clkspec->args[0] == gate->bit_idx) + return ctrl->gates[n]; + } + return ERR_PTR(-ENODEV); +} + +void __init mvebu_clk_gating_setup(struct device_node *np, + const struct clk_gating_soc_desc *desc) +{ + struct clk_gating_ctrl *ctrl; + struct clk *clk; + void __iomem *base; + const char *default_parent = NULL; + int n; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + clk = of_clk_get(np, 0); + if (!IS_ERR(clk)) { + default_parent = __clk_get_name(clk); + clk_put(clk); + } + + ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); + if (WARN_ON(!ctrl)) + return; + + spin_lock_init(&ctrl->lock); + + /* Count, allocate, and register clock gates */ + for (n = 0; desc[n].name;) + n++; + + ctrl->num_gates = n; + ctrl->gates = kzalloc(ctrl->num_gates * sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!ctrl->gates)) { + kfree(ctrl); + return; + } + + for (n = 0; n < ctrl->num_gates; n++) { + const char *parent = + (desc[n].parent) ? desc[n].parent : default_parent; + ctrl->gates[n] = clk_register_gate(NULL, desc[n].name, parent, + desc[n].flags, base, desc[n].bit_idx, + 0, &ctrl->lock); + WARN_ON(IS_ERR(ctrl->gates[n])); + } + + of_clk_add_provider(np, clk_gating_get_src, ctrl); +} diff --git a/drivers/clk/mvebu/common.h b/drivers/clk/mvebu/common.h new file mode 100644 index 00000000000..f968b4d9df9 --- /dev/null +++ b/drivers/clk/mvebu/common.h @@ -0,0 +1,48 @@ +/* + * Marvell EBU SoC common clock handling + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __CLK_MVEBU_COMMON_H_ +#define __CLK_MVEBU_COMMON_H_ + +#include <linux/kernel.h> + +struct device_node; + +struct coreclk_ratio { + int id; + const char *name; +}; + +struct coreclk_soc_desc { + u32 (*get_tclk_freq)(void __iomem *sar); + u32 (*get_cpu_freq)(void __iomem *sar); + void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); + const struct coreclk_ratio *ratios; + int num_ratios; +}; + +struct clk_gating_soc_desc { + const char *name; + const char *parent; + int bit_idx; + unsigned long flags; +}; + +void __init mvebu_coreclk_setup(struct device_node *np, + const struct coreclk_soc_desc *desc); + +void __init mvebu_clk_gating_setup(struct device_node *np, + const struct clk_gating_soc_desc *desc); + +#endif diff --git a/drivers/clk/mvebu/dove.c b/drivers/clk/mvebu/dove.c new file mode 100644 index 00000000000..79d7aedf03f --- /dev/null +++ b/drivers/clk/mvebu/dove.c @@ -0,0 +1,194 @@ +/* + * Marvell Dove SoC clocks + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include "common.h" + +/* + * Core Clocks + * + * Dove PLL sample-at-reset configuration + * + * SAR0[8:5] : CPU frequency + * 5 = 1000 MHz + * 6 = 933 MHz + * 7 = 933 MHz + * 8 = 800 MHz + * 9 = 800 MHz + * 10 = 800 MHz + * 11 = 1067 MHz + * 12 = 667 MHz + * 13 = 533 MHz + * 14 = 400 MHz + * 15 = 333 MHz + * others reserved. + * + * SAR0[11:9] : CPU to L2 Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * others reserved. + * + * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 3 = (2/5) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 8 = (1/5) * CPU + * 10 = (1/6) * CPU + * 12 = (1/7) * CPU + * 14 = (1/8) * CPU + * 15 = (1/10) * CPU + * others reserved. + * + * SAR0[24:23] : TCLK frequency + * 0 = 166 MHz + * 1 = 125 MHz + * others reserved. + */ + +#define SAR_DOVE_CPU_FREQ 5 +#define SAR_DOVE_CPU_FREQ_MASK 0xf +#define SAR_DOVE_L2_RATIO 9 +#define SAR_DOVE_L2_RATIO_MASK 0x7 +#define SAR_DOVE_DDR_RATIO 12 +#define SAR_DOVE_DDR_RATIO_MASK 0xf +#define SAR_DOVE_TCLK_FREQ 23 +#define SAR_DOVE_TCLK_FREQ_MASK 0x3 + +enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR }; + +static const struct coreclk_ratio __initconst dove_coreclk_ratios[] = { + { .id = DOVE_CPU_TO_L2, .name = "l2clk", }, + { .id = DOVE_CPU_TO_DDR, .name = "ddrclk", } +}; + +static const u32 __initconst dove_tclk_freqs[] = { + 166666667, + 125000000, + 0, 0 +}; + +static u32 __init dove_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) & + SAR_DOVE_TCLK_FREQ_MASK; + return dove_tclk_freqs[opt]; +} + +static const u32 __initconst dove_cpu_freqs[] = { + 0, 0, 0, 0, 0, + 1000000000, + 933333333, 933333333, + 800000000, 800000000, 800000000, + 1066666667, + 666666667, + 533333333, + 400000000, + 333333333 +}; + +static u32 __init dove_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) & + SAR_DOVE_CPU_FREQ_MASK; + return dove_cpu_freqs[opt]; +} + +static const int __initconst dove_cpu_l2_ratios[8][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 } +}; + +static const int __initconst dove_cpu_ddr_ratios[16][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }, + { 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 }, + { 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 } +}; + +static void __init dove_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case DOVE_CPU_TO_L2: + { + u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) & + SAR_DOVE_L2_RATIO_MASK; + *mult = dove_cpu_l2_ratios[opt][0]; + *div = dove_cpu_l2_ratios[opt][1]; + break; + } + case DOVE_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) & + SAR_DOVE_DDR_RATIO_MASK; + *mult = dove_cpu_ddr_ratios[opt][0]; + *div = dove_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct coreclk_soc_desc dove_coreclks = { + .get_tclk_freq = dove_get_tclk_freq, + .get_cpu_freq = dove_get_cpu_freq, + .get_clk_ratio = dove_get_clk_ratio, + .ratios = dove_coreclk_ratios, + .num_ratios = ARRAY_SIZE(dove_coreclk_ratios), +}; + +static void __init dove_coreclk_init(struct device_node *np) +{ + mvebu_coreclk_setup(np, &dove_coreclks); +} +CLK_OF_DECLARE(dove_core_clk, "marvell,dove-core-clock", dove_coreclk_init); + +/* + * Clock Gating Control + */ + +static const struct clk_gating_soc_desc __initconst dove_gating_desc[] = { + { "usb0", NULL, 0, 0 }, + { "usb1", NULL, 1, 0 }, + { "ge", "gephy", 2, 0 }, + { "sata", NULL, 3, 0 }, + { "pex0", NULL, 4, 0 }, + { "pex1", NULL, 5, 0 }, + { "sdio0", NULL, 8, 0 }, + { "sdio1", NULL, 9, 0 }, + { "nand", NULL, 10, 0 }, + { "camera", NULL, 11, 0 }, + { "i2s0", NULL, 12, 0 }, + { "i2s1", NULL, 13, 0 }, + { "crypto", NULL, 15, 0 }, + { "ac97", NULL, 21, 0 }, + { "pdma", NULL, 22, 0 }, + { "xor0", NULL, 23, 0 }, + { "xor1", NULL, 24, 0 }, + { "gephy", NULL, 30, 0 }, + { } +}; + +static void __init dove_clk_gating_init(struct device_node *np) +{ + mvebu_clk_gating_setup(np, dove_gating_desc); +} +CLK_OF_DECLARE(dove_clk_gating, "marvell,dove-gating-clock", + dove_clk_gating_init); diff --git a/drivers/clk/mvebu/kirkwood.c b/drivers/clk/mvebu/kirkwood.c new file mode 100644 index 00000000000..71d24619ccd --- /dev/null +++ b/drivers/clk/mvebu/kirkwood.c @@ -0,0 +1,247 @@ +/* + * Marvell Kirkwood SoC clocks + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include "common.h" + +/* + * Core Clocks + * + * Kirkwood PLL sample-at-reset configuration + * (6180 has different SAR layout than other Kirkwood SoCs) + * + * SAR0[4:3,22,1] : CPU frequency (6281,6292,6282) + * 4 = 600 MHz + * 6 = 800 MHz + * 7 = 1000 MHz + * 9 = 1200 MHz + * 12 = 1500 MHz + * 13 = 1600 MHz + * 14 = 1800 MHz + * 15 = 2000 MHz + * others reserved. + * + * SAR0[19,10:9] : CPU to L2 Clock divider ratio (6281,6292,6282) + * 1 = (1/2) * CPU + * 3 = (1/3) * CPU + * 5 = (1/4) * CPU + * others reserved. + * + * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282) + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 7 = (2/9) * CPU + * 8 = (1/5) * CPU + * 9 = (1/6) * CPU + * others reserved. + * + * SAR0[4:2] : Kirkwood 6180 cpu/l2/ddr clock configuration (6180 only) + * 5 = [CPU = 600 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/3) * CPU] + * 6 = [CPU = 800 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/4) * CPU] + * 7 = [CPU = 1000 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/5) * CPU] + * others reserved. + * + * SAR0[21] : TCLK frequency + * 0 = 200 MHz + * 1 = 166 MHz + * others reserved. + */ + +#define SAR_KIRKWOOD_CPU_FREQ(x) \ + (((x & (1 << 1)) >> 1) | \ + ((x & (1 << 22)) >> 21) | \ + ((x & (3 << 3)) >> 1)) +#define SAR_KIRKWOOD_L2_RATIO(x) \ + (((x & (3 << 9)) >> 9) | \ + (((x & (1 << 19)) >> 17))) +#define SAR_KIRKWOOD_DDR_RATIO 5 +#define SAR_KIRKWOOD_DDR_RATIO_MASK 0xf +#define SAR_MV88F6180_CLK 2 +#define SAR_MV88F6180_CLK_MASK 0x7 +#define SAR_KIRKWOOD_TCLK_FREQ 21 +#define SAR_KIRKWOOD_TCLK_FREQ_MASK 0x1 + +enum { KIRKWOOD_CPU_TO_L2, KIRKWOOD_CPU_TO_DDR }; + +static const struct coreclk_ratio __initconst kirkwood_coreclk_ratios[] = { + { .id = KIRKWOOD_CPU_TO_L2, .name = "l2clk", }, + { .id = KIRKWOOD_CPU_TO_DDR, .name = "ddrclk", } +}; + +static u32 __init kirkwood_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_KIRKWOOD_TCLK_FREQ) & + SAR_KIRKWOOD_TCLK_FREQ_MASK; + return (opt) ? 166666667 : 200000000; +} + +static const u32 __initconst kirkwood_cpu_freqs[] = { + 0, 0, 0, 0, + 600000000, + 0, + 800000000, + 1000000000, + 0, + 1200000000, + 0, 0, + 1500000000, + 1600000000, + 1800000000, + 2000000000 +}; + +static u32 __init kirkwood_get_cpu_freq(void __iomem *sar) +{ + u32 opt = SAR_KIRKWOOD_CPU_FREQ(readl(sar)); + return kirkwood_cpu_freqs[opt]; +} + +static const int __initconst kirkwood_cpu_l2_ratios[8][2] = { + { 0, 1 }, { 1, 2 }, { 0, 1 }, { 1, 3 }, + { 0, 1 }, { 1, 4 }, { 0, 1 }, { 0, 1 } +}; + +static const int __initconst kirkwood_cpu_ddr_ratios[16][2] = { + { 0, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 2, 9 }, + { 1, 5 }, { 1, 6 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 } +}; + +static void __init kirkwood_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + u32 opt = SAR_KIRKWOOD_L2_RATIO(readl(sar)); + *mult = kirkwood_cpu_l2_ratios[opt][0]; + *div = kirkwood_cpu_l2_ratios[opt][1]; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_KIRKWOOD_DDR_RATIO) & + SAR_KIRKWOOD_DDR_RATIO_MASK; + *mult = kirkwood_cpu_ddr_ratios[opt][0]; + *div = kirkwood_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const u32 __initconst mv88f6180_cpu_freqs[] = { + 0, 0, 0, 0, 0, + 600000000, + 800000000, + 1000000000 +}; + +static u32 __init mv88f6180_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & SAR_MV88F6180_CLK_MASK; + return mv88f6180_cpu_freqs[opt]; +} + +static const int __initconst mv88f6180_cpu_ddr_ratios[8][2] = { + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 1, 3 }, { 1, 4 }, { 1, 5 } +}; + +static void __init mv88f6180_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + /* mv88f6180 has a fixed 1:2 CPU-to-L2 ratio */ + *mult = 1; + *div = 2; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & + SAR_MV88F6180_CLK_MASK; + *mult = mv88f6180_cpu_ddr_ratios[opt][0]; + *div = mv88f6180_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct coreclk_soc_desc kirkwood_coreclks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = kirkwood_get_cpu_freq, + .get_clk_ratio = kirkwood_get_clk_ratio, + .ratios = kirkwood_coreclk_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_coreclk_ratios), +}; + +static void __init kirkwood_coreclk_init(struct device_node *np) +{ + mvebu_coreclk_setup(np, &kirkwood_coreclks); +} +CLK_OF_DECLARE(kirkwood_core_clk, "marvell,kirkwood-core-clock", + kirkwood_coreclk_init); + +static const struct coreclk_soc_desc mv88f6180_coreclks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = mv88f6180_get_cpu_freq, + .get_clk_ratio = mv88f6180_get_clk_ratio, + .ratios = kirkwood_coreclk_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_coreclk_ratios), +}; + +static void __init mv88f6180_coreclk_init(struct device_node *np) +{ + mvebu_coreclk_setup(np, &mv88f6180_coreclks); +} +CLK_OF_DECLARE(mv88f6180_core_clk, "marvell,mv88f6180-core-clock", + mv88f6180_coreclk_init); + +/* + * Clock Gating Control + */ + +static const struct clk_gating_soc_desc __initconst kirkwood_gating_desc[] = { + { "ge0", NULL, 0, 0 }, + { "pex0", NULL, 2, 0 }, + { "usb0", NULL, 3, 0 }, + { "sdio", NULL, 4, 0 }, + { "tsu", NULL, 5, 0 }, + { "runit", NULL, 7, 0 }, + { "xor0", NULL, 8, 0 }, + { "audio", NULL, 9, 0 }, + { "powersave", "cpuclk", 11, 0 }, + { "sata0", NULL, 14, 0 }, + { "sata1", NULL, 15, 0 }, + { "xor1", NULL, 16, 0 }, + { "crypto", NULL, 17, 0 }, + { "pex1", NULL, 18, 0 }, + { "ge1", NULL, 19, 0 }, + { "tdm", NULL, 20, 0 }, + { } +}; + +static void __init kirkwood_clk_gating_init(struct device_node *np) +{ + mvebu_clk_gating_setup(np, kirkwood_gating_desc); +} +CLK_OF_DECLARE(kirkwood_clk_gating, "marvell,kirkwood-gating-clock", + kirkwood_clk_gating_init); diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c index bd11315cf5a..5bb848cac6e 100644 --- a/drivers/clk/socfpga/clk.c +++ b/drivers/clk/socfpga/clk.c @@ -24,15 +24,17 @@ #include <linux/of.h> /* Clock Manager offsets */ -#define CLKMGR_CTRL 0x0 -#define CLKMGR_BYPASS 0x4 +#define CLKMGR_CTRL 0x0 +#define CLKMGR_BYPASS 0x4 +#define CLKMGR_L4SRC 0x70 +#define CLKMGR_PERPLL_SRC 0xAC /* Clock bypass bits */ -#define MAINPLL_BYPASS (1<<0) -#define SDRAMPLL_BYPASS (1<<1) -#define SDRAMPLL_SRC_BYPASS (1<<2) -#define PERPLL_BYPASS (1<<3) -#define PERPLL_SRC_BYPASS (1<<4) +#define MAINPLL_BYPASS (1<<0) +#define SDRAMPLL_BYPASS (1<<1) +#define SDRAMPLL_SRC_BYPASS (1<<2) +#define PERPLL_BYPASS (1<<3) +#define PERPLL_SRC_BYPASS (1<<4) #define SOCFPGA_PLL_BG_PWRDWN 0 #define SOCFPGA_PLL_EXT_ENA 1 @@ -41,6 +43,17 @@ #define SOCFPGA_PLL_DIVF_SHIFT 3 #define SOCFPGA_PLL_DIVQ_MASK 0x003F0000 #define SOCFPGA_PLL_DIVQ_SHIFT 16 +#define SOCFGPA_MAX_PARENTS 3 + +#define SOCFPGA_L4_MP_CLK "l4_mp_clk" +#define SOCFPGA_L4_SP_CLK "l4_sp_clk" +#define SOCFPGA_NAND_CLK "nand_clk" +#define SOCFPGA_NAND_X_CLK "nand_x_clk" +#define SOCFPGA_MMC_CLK "mmc_clk" +#define SOCFPGA_DB_CLK "gpio_db_clk" + +#define div_mask(width) ((1 << (width)) - 1) +#define streq(a, b) (strcmp((a), (b)) == 0) extern void __iomem *clk_mgr_base_addr; @@ -49,6 +62,9 @@ struct socfpga_clk { char *parent_name; char *clk_name; u32 fixed_div; + void __iomem *div_reg; + u32 width; /* only valid if div_reg != 0 */ + u32 shift; /* only valid if div_reg != 0 */ }; #define to_socfpga_clk(p) container_of(p, struct socfpga_clk, hw.hw) @@ -132,8 +148,9 @@ static __init struct clk *socfpga_clk_init(struct device_node *node, socfpga_clk->hw.hw.init = &init; - if (strcmp(clk_name, "main_pll") || strcmp(clk_name, "periph_pll") || - strcmp(clk_name, "sdram_pll")) { + if (streq(clk_name, "main_pll") || + streq(clk_name, "periph_pll") || + streq(clk_name, "sdram_pll")) { socfpga_clk->hw.bit_idx = SOCFPGA_PLL_EXT_ENA; clk_pll_ops.enable = clk_gate_ops.enable; clk_pll_ops.disable = clk_gate_ops.disable; @@ -148,6 +165,159 @@ static __init struct clk *socfpga_clk_init(struct device_node *node, return clk; } +static u8 socfpga_clk_get_parent(struct clk_hw *hwclk) +{ + u32 l4_src; + u32 perpll_src; + + if (streq(hwclk->init->name, SOCFPGA_L4_MP_CLK)) { + l4_src = readl(clk_mgr_base_addr + CLKMGR_L4SRC); + return l4_src &= 0x1; + } + if (streq(hwclk->init->name, SOCFPGA_L4_SP_CLK)) { + l4_src = readl(clk_mgr_base_addr + CLKMGR_L4SRC); + return !!(l4_src & 2); + } + + perpll_src = readl(clk_mgr_base_addr + CLKMGR_PERPLL_SRC); + if (streq(hwclk->init->name, SOCFPGA_MMC_CLK)) + return perpll_src &= 0x3; + if (streq(hwclk->init->name, SOCFPGA_NAND_CLK) || + streq(hwclk->init->name, SOCFPGA_NAND_X_CLK)) + return (perpll_src >> 2) & 3; + + /* QSPI clock */ + return (perpll_src >> 4) & 3; + +} + +static int socfpga_clk_set_parent(struct clk_hw *hwclk, u8 parent) +{ + u32 src_reg; + + if (streq(hwclk->init->name, SOCFPGA_L4_MP_CLK)) { + src_reg = readl(clk_mgr_base_addr + CLKMGR_L4SRC); + src_reg &= ~0x1; + src_reg |= parent; + writel(src_reg, clk_mgr_base_addr + CLKMGR_L4SRC); + } else if (streq(hwclk->init->name, SOCFPGA_L4_SP_CLK)) { + src_reg = readl(clk_mgr_base_addr + CLKMGR_L4SRC); + src_reg &= ~0x2; + src_reg |= (parent << 1); + writel(src_reg, clk_mgr_base_addr + CLKMGR_L4SRC); + } else { + src_reg = readl(clk_mgr_base_addr + CLKMGR_PERPLL_SRC); + if (streq(hwclk->init->name, SOCFPGA_MMC_CLK)) { + src_reg &= ~0x3; + src_reg |= parent; + } else if (streq(hwclk->init->name, SOCFPGA_NAND_CLK) || + streq(hwclk->init->name, SOCFPGA_NAND_X_CLK)) { + src_reg &= ~0xC; + src_reg |= (parent << 2); + } else {/* QSPI clock */ + src_reg &= ~0x30; + src_reg |= (parent << 4); + } + writel(src_reg, clk_mgr_base_addr + CLKMGR_PERPLL_SRC); + } + + return 0; +} + +static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct socfpga_clk *socfpgaclk = to_socfpga_clk(hwclk); + u32 div = 1, val; + + if (socfpgaclk->fixed_div) + div = socfpgaclk->fixed_div; + else if (socfpgaclk->div_reg) { + val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift; + val &= div_mask(socfpgaclk->width); + if (streq(hwclk->init->name, SOCFPGA_DB_CLK)) + div = val + 1; + else + div = (1 << val); + } + + return parent_rate / div; +} + +static struct clk_ops gateclk_ops = { + .recalc_rate = socfpga_clk_recalc_rate, + .get_parent = socfpga_clk_get_parent, + .set_parent = socfpga_clk_set_parent, +}; + +static void __init socfpga_gate_clk_init(struct device_node *node, + const struct clk_ops *ops) +{ + u32 clk_gate[2]; + u32 div_reg[3]; + u32 fixed_div; + struct clk *clk; + struct socfpga_clk *socfpga_clk; + const char *clk_name = node->name; + const char *parent_name[SOCFGPA_MAX_PARENTS]; + struct clk_init_data init; + int rc; + int i = 0; + + socfpga_clk = kzalloc(sizeof(*socfpga_clk), GFP_KERNEL); + if (WARN_ON(!socfpga_clk)) + return; + + rc = of_property_read_u32_array(node, "clk-gate", clk_gate, 2); + if (rc) + clk_gate[0] = 0; + + if (clk_gate[0]) { + socfpga_clk->hw.reg = clk_mgr_base_addr + clk_gate[0]; + socfpga_clk->hw.bit_idx = clk_gate[1]; + + gateclk_ops.enable = clk_gate_ops.enable; + gateclk_ops.disable = clk_gate_ops.disable; + } + + rc = of_property_read_u32(node, "fixed-divider", &fixed_div); + if (rc) + socfpga_clk->fixed_div = 0; + else + socfpga_clk->fixed_div = fixed_div; + + rc = of_property_read_u32_array(node, "div-reg", div_reg, 3); + if (!rc) { + socfpga_clk->div_reg = clk_mgr_base_addr + div_reg[0]; + socfpga_clk->shift = div_reg[1]; + socfpga_clk->width = div_reg[2]; + } else { + socfpga_clk->div_reg = 0; + } + + of_property_read_string(node, "clock-output-names", &clk_name); + + init.name = clk_name; + init.ops = ops; + init.flags = 0; + while (i < SOCFGPA_MAX_PARENTS && (parent_name[i] = + of_clk_get_parent_name(node, i)) != NULL) + i++; + + init.parent_names = parent_name; + init.num_parents = i; + socfpga_clk->hw.hw.init = &init; + + clk = clk_register(NULL, &socfpga_clk->hw.hw); + if (WARN_ON(IS_ERR(clk))) { + kfree(socfpga_clk); + return; + } + rc = of_clk_add_provider(node, of_clk_src_simple_get, clk); + if (WARN_ON(rc)) + return; +} + static void __init socfpga_pll_init(struct device_node *node) { socfpga_clk_init(node, &clk_pll_ops); @@ -160,6 +330,12 @@ static void __init socfpga_periph_init(struct device_node *node) } CLK_OF_DECLARE(socfpga_periph, "altr,socfpga-perip-clk", socfpga_periph_init); +static void __init socfpga_gate_init(struct device_node *node) +{ + socfpga_gate_clk_init(node, &gateclk_ops); +} +CLK_OF_DECLARE(socfpga_gate, "altr,socfpga-gate-clk", socfpga_gate_init); + void __init socfpga_init_clocks(void) { struct clk *clk; diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c index d78e16ee161..40d939d091b 100644 --- a/drivers/clk/tegra/clk-tegra114.c +++ b/drivers/clk/tegra/clk-tegra114.c @@ -250,6 +250,9 @@ #define CLK_SOURCE_XUSB_DEV_SRC 0x60c #define CLK_SOURCE_EMC 0x19c +/* Tegra CPU clock and reset control regs */ +#define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470 + static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32]; static void __iomem *clk_base; @@ -2000,7 +2003,25 @@ static __init void tegra114_periph_clk_init(void __iomem *clk_base) } } -static struct tegra_cpu_car_ops tegra114_cpu_car_ops; +/* Tegra114 CPU clock and reset control functions */ +static void tegra114_wait_cpu_in_reset(u32 cpu) +{ + unsigned int reg; + + do { + reg = readl(clk_base + CLK_RST_CONTROLLER_CPU_CMPLX_STATUS); + cpu_relax(); + } while (!(reg & (1 << cpu))); /* check CPU been reset or not */ +} +static void tegra114_disable_cpu_clock(u32 cpu) +{ + /* flow controller would take care in the power sequence. */ +} + +static struct tegra_cpu_car_ops tegra114_cpu_car_ops = { + .wait_for_reset = tegra114_wait_cpu_in_reset, + .disable_clock = tegra114_disable_cpu_clock, +}; static const struct of_device_id pmc_match[] __initconst = { { .compatible = "nvidia,tegra114-pmc" }, diff --git a/drivers/clk/zynq/Makefile b/drivers/clk/zynq/Makefile new file mode 100644 index 00000000000..156d923f4fa --- /dev/null +++ b/drivers/clk/zynq/Makefile @@ -0,0 +1,3 @@ +# Zynq clock specific Makefile + +obj-$(CONFIG_ARCH_ZYNQ) += clkc.o pll.o diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c new file mode 100644 index 00000000000..5c205b60a82 --- /dev/null +++ b/drivers/clk/zynq/clkc.c @@ -0,0 +1,533 @@ +/* + * Zynq clock controller + * + * Copyright (C) 2012 - 2013 Xilinx + * + * Sören Brinkmann <soren.brinkmann@xilinx.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk/zynq.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/io.h> + +static void __iomem *zynq_slcr_base_priv; + +#define SLCR_ARMPLL_CTRL (zynq_slcr_base_priv + 0x100) +#define SLCR_DDRPLL_CTRL (zynq_slcr_base_priv + 0x104) +#define SLCR_IOPLL_CTRL (zynq_slcr_base_priv + 0x108) +#define SLCR_PLL_STATUS (zynq_slcr_base_priv + 0x10c) +#define SLCR_ARM_CLK_CTRL (zynq_slcr_base_priv + 0x120) +#define SLCR_DDR_CLK_CTRL (zynq_slcr_base_priv + 0x124) +#define SLCR_DCI_CLK_CTRL (zynq_slcr_base_priv + 0x128) +#define SLCR_APER_CLK_CTRL (zynq_slcr_base_priv + 0x12c) +#define SLCR_GEM0_CLK_CTRL (zynq_slcr_base_priv + 0x140) +#define SLCR_GEM1_CLK_CTRL (zynq_slcr_base_priv + 0x144) +#define SLCR_SMC_CLK_CTRL (zynq_slcr_base_priv + 0x148) +#define SLCR_LQSPI_CLK_CTRL (zynq_slcr_base_priv + 0x14c) +#define SLCR_SDIO_CLK_CTRL (zynq_slcr_base_priv + 0x150) +#define SLCR_UART_CLK_CTRL (zynq_slcr_base_priv + 0x154) +#define SLCR_SPI_CLK_CTRL (zynq_slcr_base_priv + 0x158) +#define SLCR_CAN_CLK_CTRL (zynq_slcr_base_priv + 0x15c) +#define SLCR_CAN_MIOCLK_CTRL (zynq_slcr_base_priv + 0x160) +#define SLCR_DBG_CLK_CTRL (zynq_slcr_base_priv + 0x164) +#define SLCR_PCAP_CLK_CTRL (zynq_slcr_base_priv + 0x168) +#define SLCR_FPGA0_CLK_CTRL (zynq_slcr_base_priv + 0x170) +#define SLCR_621_TRUE (zynq_slcr_base_priv + 0x1c4) +#define SLCR_SWDT_CLK_SEL (zynq_slcr_base_priv + 0x304) + +#define NUM_MIO_PINS 54 + +enum zynq_clk { + armpll, ddrpll, iopll, + cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x, + ddr2x, ddr3x, dci, + lqspi, smc, pcap, gem0, gem1, fclk0, fclk1, fclk2, fclk3, can0, can1, + sdio0, sdio1, uart0, uart1, spi0, spi1, dma, + usb0_aper, usb1_aper, gem0_aper, gem1_aper, + sdio0_aper, sdio1_aper, spi0_aper, spi1_aper, can0_aper, can1_aper, + i2c0_aper, i2c1_aper, uart0_aper, uart1_aper, gpio_aper, lqspi_aper, + smc_aper, swdt, dbg_trc, dbg_apb, clk_max}; + +static struct clk *ps_clk; +static struct clk *clks[clk_max]; +static struct clk_onecell_data clk_data; + +static DEFINE_SPINLOCK(armpll_lock); +static DEFINE_SPINLOCK(ddrpll_lock); +static DEFINE_SPINLOCK(iopll_lock); +static DEFINE_SPINLOCK(armclk_lock); +static DEFINE_SPINLOCK(ddrclk_lock); +static DEFINE_SPINLOCK(dciclk_lock); +static DEFINE_SPINLOCK(gem0clk_lock); +static DEFINE_SPINLOCK(gem1clk_lock); +static DEFINE_SPINLOCK(canclk_lock); +static DEFINE_SPINLOCK(canmioclk_lock); +static DEFINE_SPINLOCK(dbgclk_lock); +static DEFINE_SPINLOCK(aperclk_lock); + +static const char dummy_nm[] __initconst = "dummy_name"; + +static const char *armpll_parents[] __initdata = {"armpll_int", "ps_clk"}; +static const char *ddrpll_parents[] __initdata = {"ddrpll_int", "ps_clk"}; +static const char *iopll_parents[] __initdata = {"iopll_int", "ps_clk"}; +static const char *gem0_mux_parents[] __initdata = {"gem0_div1", dummy_nm}; +static const char *gem1_mux_parents[] __initdata = {"gem1_div1", dummy_nm}; +static const char *can0_mio_mux2_parents[] __initdata = {"can0_gate", + "can0_mio_mux"}; +static const char *can1_mio_mux2_parents[] __initdata = {"can1_gate", + "can1_mio_mux"}; +static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div", + dummy_nm}; + +static const char *dbgtrc_emio_input_names[] __initdata = {"trace_emio_clk"}; +static const char *gem0_emio_input_names[] __initdata = {"gem0_emio_clk"}; +static const char *gem1_emio_input_names[] __initdata = {"gem1_emio_clk"}; +static const char *swdt_ext_clk_input_names[] __initdata = {"swdt_ext_clk"}; + +static void __init zynq_clk_register_fclk(enum zynq_clk fclk, + const char *clk_name, void __iomem *fclk_ctrl_reg, + const char **parents) +{ + struct clk *clk; + char *mux_name; + char *div0_name; + char *div1_name; + spinlock_t *fclk_lock; + spinlock_t *fclk_gate_lock; + void __iomem *fclk_gate_reg = fclk_ctrl_reg + 8; + + fclk_lock = kmalloc(sizeof(*fclk_lock), GFP_KERNEL); + if (!fclk_lock) + goto err; + fclk_gate_lock = kmalloc(sizeof(*fclk_gate_lock), GFP_KERNEL); + if (!fclk_gate_lock) + goto err; + spin_lock_init(fclk_lock); + spin_lock_init(fclk_gate_lock); + + mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name); + div0_name = kasprintf(GFP_KERNEL, "%s_div0", clk_name); + div1_name = kasprintf(GFP_KERNEL, "%s_div1", clk_name); + + clk = clk_register_mux(NULL, mux_name, parents, 4, 0, + fclk_ctrl_reg, 4, 2, 0, fclk_lock); + + clk = clk_register_divider(NULL, div0_name, mux_name, + 0, fclk_ctrl_reg, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, fclk_lock); + + clk = clk_register_divider(NULL, div1_name, div0_name, + CLK_SET_RATE_PARENT, fclk_ctrl_reg, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + fclk_lock); + + clks[fclk] = clk_register_gate(NULL, clk_name, + div1_name, CLK_SET_RATE_PARENT, fclk_gate_reg, + 0, CLK_GATE_SET_TO_DISABLE, fclk_gate_lock); + kfree(mux_name); + kfree(div0_name); + kfree(div1_name); + + return; + +err: + clks[fclk] = ERR_PTR(-ENOMEM); +} + +static void __init zynq_clk_register_periph_clk(enum zynq_clk clk0, + enum zynq_clk clk1, const char *clk_name0, + const char *clk_name1, void __iomem *clk_ctrl, + const char **parents, unsigned int two_gates) +{ + struct clk *clk; + char *mux_name; + char *div_name; + spinlock_t *lock; + + lock = kmalloc(sizeof(*lock), GFP_KERNEL); + if (!lock) + goto err; + spin_lock_init(lock); + + mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name0); + div_name = kasprintf(GFP_KERNEL, "%s_div", clk_name0); + + clk = clk_register_mux(NULL, mux_name, parents, 4, 0, + clk_ctrl, 4, 2, 0, lock); + + clk = clk_register_divider(NULL, div_name, mux_name, 0, clk_ctrl, 8, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, lock); + + clks[clk0] = clk_register_gate(NULL, clk_name0, div_name, + CLK_SET_RATE_PARENT, clk_ctrl, 0, 0, lock); + if (two_gates) + clks[clk1] = clk_register_gate(NULL, clk_name1, div_name, + CLK_SET_RATE_PARENT, clk_ctrl, 1, 0, lock); + + kfree(mux_name); + kfree(div_name); + + return; + +err: + clks[clk0] = ERR_PTR(-ENOMEM); + if (two_gates) + clks[clk1] = ERR_PTR(-ENOMEM); +} + +static void __init zynq_clk_setup(struct device_node *np) +{ + int i; + u32 tmp; + int ret; + struct clk *clk; + char *clk_name; + const char *clk_output_name[clk_max]; + const char *cpu_parents[4]; + const char *periph_parents[4]; + const char *swdt_ext_clk_mux_parents[2]; + const char *can_mio_mux_parents[NUM_MIO_PINS]; + + pr_info("Zynq clock init\n"); + + /* get clock output names from DT */ + for (i = 0; i < clk_max; i++) { + if (of_property_read_string_index(np, "clock-output-names", + i, &clk_output_name[i])) { + pr_err("%s: clock output name not in DT\n", __func__); + BUG(); + } + } + cpu_parents[0] = clk_output_name[armpll]; + cpu_parents[1] = clk_output_name[armpll]; + cpu_parents[2] = clk_output_name[ddrpll]; + cpu_parents[3] = clk_output_name[iopll]; + periph_parents[0] = clk_output_name[iopll]; + periph_parents[1] = clk_output_name[iopll]; + periph_parents[2] = clk_output_name[armpll]; + periph_parents[3] = clk_output_name[ddrpll]; + + /* ps_clk */ + ret = of_property_read_u32(np, "ps-clk-frequency", &tmp); + if (ret) { + pr_warn("ps_clk frequency not specified, using 33 MHz.\n"); + tmp = 33333333; + } + ps_clk = clk_register_fixed_rate(NULL, "ps_clk", NULL, CLK_IS_ROOT, + tmp); + + /* PLLs */ + clk = clk_register_zynq_pll("armpll_int", "ps_clk", SLCR_ARMPLL_CTRL, + SLCR_PLL_STATUS, 0, &armpll_lock); + clks[armpll] = clk_register_mux(NULL, clk_output_name[armpll], + armpll_parents, 2, 0, SLCR_ARMPLL_CTRL, 4, 1, 0, + &armpll_lock); + + clk = clk_register_zynq_pll("ddrpll_int", "ps_clk", SLCR_DDRPLL_CTRL, + SLCR_PLL_STATUS, 1, &ddrpll_lock); + clks[ddrpll] = clk_register_mux(NULL, clk_output_name[ddrpll], + ddrpll_parents, 2, 0, SLCR_DDRPLL_CTRL, 4, 1, 0, + &ddrpll_lock); + + clk = clk_register_zynq_pll("iopll_int", "ps_clk", SLCR_IOPLL_CTRL, + SLCR_PLL_STATUS, 2, &iopll_lock); + clks[iopll] = clk_register_mux(NULL, clk_output_name[iopll], + iopll_parents, 2, 0, SLCR_IOPLL_CTRL, 4, 1, 0, + &iopll_lock); + + /* CPU clocks */ + tmp = readl(SLCR_621_TRUE) & 1; + clk = clk_register_mux(NULL, "cpu_mux", cpu_parents, 4, 0, + SLCR_ARM_CLK_CTRL, 4, 2, 0, &armclk_lock); + clk = clk_register_divider(NULL, "cpu_div", "cpu_mux", 0, + SLCR_ARM_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &armclk_lock); + + clks[cpu_6or4x] = clk_register_gate(NULL, clk_output_name[cpu_6or4x], + "cpu_div", CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + SLCR_ARM_CLK_CTRL, 24, 0, &armclk_lock); + + clk = clk_register_fixed_factor(NULL, "cpu_3or2x_div", "cpu_div", 0, + 1, 2); + clks[cpu_3or2x] = clk_register_gate(NULL, clk_output_name[cpu_3or2x], + "cpu_3or2x_div", CLK_IGNORE_UNUSED, + SLCR_ARM_CLK_CTRL, 25, 0, &armclk_lock); + + clk = clk_register_fixed_factor(NULL, "cpu_2x_div", "cpu_div", 0, 1, + 2 + tmp); + clks[cpu_2x] = clk_register_gate(NULL, clk_output_name[cpu_2x], + "cpu_2x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, + 26, 0, &armclk_lock); + + clk = clk_register_fixed_factor(NULL, "cpu_1x_div", "cpu_div", 0, 1, + 4 + 2 * tmp); + clks[cpu_1x] = clk_register_gate(NULL, clk_output_name[cpu_1x], + "cpu_1x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, 27, + 0, &armclk_lock); + + /* Timers */ + swdt_ext_clk_mux_parents[0] = clk_output_name[cpu_1x]; + for (i = 0; i < ARRAY_SIZE(swdt_ext_clk_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + swdt_ext_clk_input_names[i]); + if (idx >= 0) + swdt_ext_clk_mux_parents[i + 1] = + of_clk_get_parent_name(np, idx); + else + swdt_ext_clk_mux_parents[i + 1] = dummy_nm; + } + clks[swdt] = clk_register_mux(NULL, clk_output_name[swdt], + swdt_ext_clk_mux_parents, 2, CLK_SET_RATE_PARENT, + SLCR_SWDT_CLK_SEL, 0, 1, 0, &gem0clk_lock); + + /* DDR clocks */ + clk = clk_register_divider(NULL, "ddr2x_div", "ddrpll", 0, + SLCR_DDR_CLK_CTRL, 26, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock); + clks[ddr2x] = clk_register_gate(NULL, clk_output_name[ddr2x], + "ddr2x_div", 0, SLCR_DDR_CLK_CTRL, 1, 0, &ddrclk_lock); + clk_prepare_enable(clks[ddr2x]); + clk = clk_register_divider(NULL, "ddr3x_div", "ddrpll", 0, + SLCR_DDR_CLK_CTRL, 20, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock); + clks[ddr3x] = clk_register_gate(NULL, clk_output_name[ddr3x], + "ddr3x_div", 0, SLCR_DDR_CLK_CTRL, 0, 0, &ddrclk_lock); + clk_prepare_enable(clks[ddr3x]); + + clk = clk_register_divider(NULL, "dci_div0", "ddrpll", 0, + SLCR_DCI_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &dciclk_lock); + clk = clk_register_divider(NULL, "dci_div1", "dci_div0", + CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &dciclk_lock); + clks[dci] = clk_register_gate(NULL, clk_output_name[dci], "dci_div1", + CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 0, 0, + &dciclk_lock); + clk_prepare_enable(clks[dci]); + + /* Peripheral clocks */ + for (i = fclk0; i <= fclk3; i++) + zynq_clk_register_fclk(i, clk_output_name[i], + SLCR_FPGA0_CLK_CTRL + 0x10 * (i - fclk0), + periph_parents); + + zynq_clk_register_periph_clk(lqspi, 0, clk_output_name[lqspi], NULL, + SLCR_LQSPI_CLK_CTRL, periph_parents, 0); + + zynq_clk_register_periph_clk(smc, 0, clk_output_name[smc], NULL, + SLCR_SMC_CLK_CTRL, periph_parents, 0); + + zynq_clk_register_periph_clk(pcap, 0, clk_output_name[pcap], NULL, + SLCR_PCAP_CLK_CTRL, periph_parents, 0); + + zynq_clk_register_periph_clk(sdio0, sdio1, clk_output_name[sdio0], + clk_output_name[sdio1], SLCR_SDIO_CLK_CTRL, + periph_parents, 1); + + zynq_clk_register_periph_clk(uart0, uart1, clk_output_name[uart0], + clk_output_name[uart1], SLCR_UART_CLK_CTRL, + periph_parents, 1); + + zynq_clk_register_periph_clk(spi0, spi1, clk_output_name[spi0], + clk_output_name[spi1], SLCR_SPI_CLK_CTRL, + periph_parents, 1); + + for (i = 0; i < ARRAY_SIZE(gem0_emio_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + gem0_emio_input_names[i]); + if (idx >= 0) + gem0_mux_parents[i + 1] = of_clk_get_parent_name(np, + idx); + } + clk = clk_register_mux(NULL, "gem0_mux", periph_parents, 4, 0, + SLCR_GEM0_CLK_CTRL, 4, 2, 0, &gem0clk_lock); + clk = clk_register_divider(NULL, "gem0_div0", "gem0_mux", 0, + SLCR_GEM0_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &gem0clk_lock); + clk = clk_register_divider(NULL, "gem0_div1", "gem0_div0", + CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &gem0clk_lock); + clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, 0, + SLCR_GEM0_CLK_CTRL, 6, 1, 0, &gem0clk_lock); + clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0], + "gem0_emio_mux", CLK_SET_RATE_PARENT, + SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock); + + for (i = 0; i < ARRAY_SIZE(gem1_emio_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + gem1_emio_input_names[i]); + if (idx >= 0) + gem1_mux_parents[i + 1] = of_clk_get_parent_name(np, + idx); + } + clk = clk_register_mux(NULL, "gem1_mux", periph_parents, 4, 0, + SLCR_GEM1_CLK_CTRL, 4, 2, 0, &gem1clk_lock); + clk = clk_register_divider(NULL, "gem1_div0", "gem1_mux", 0, + SLCR_GEM1_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &gem1clk_lock); + clk = clk_register_divider(NULL, "gem1_div1", "gem1_div0", + CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &gem1clk_lock); + clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, 0, + SLCR_GEM1_CLK_CTRL, 6, 1, 0, &gem1clk_lock); + clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1], + "gem1_emio_mux", CLK_SET_RATE_PARENT, + SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock); + + tmp = strlen("mio_clk_00x"); + clk_name = kmalloc(tmp, GFP_KERNEL); + for (i = 0; i < NUM_MIO_PINS; i++) { + int idx; + + snprintf(clk_name, tmp, "mio_clk_%2.2d", i); + idx = of_property_match_string(np, "clock-names", clk_name); + if (idx >= 0) + can_mio_mux_parents[i] = of_clk_get_parent_name(np, + idx); + else + can_mio_mux_parents[i] = dummy_nm; + } + kfree(clk_name); + clk = clk_register_mux(NULL, "can_mux", periph_parents, 4, 0, + SLCR_CAN_CLK_CTRL, 4, 2, 0, &canclk_lock); + clk = clk_register_divider(NULL, "can_div0", "can_mux", 0, + SLCR_CAN_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &canclk_lock); + clk = clk_register_divider(NULL, "can_div1", "can_div0", + CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &canclk_lock); + clk = clk_register_gate(NULL, "can0_gate", "can_div1", + CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 0, 0, + &canclk_lock); + clk = clk_register_gate(NULL, "can1_gate", "can_div1", + CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 1, 0, + &canclk_lock); + clk = clk_register_mux(NULL, "can0_mio_mux", + can_mio_mux_parents, 54, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 0, 6, 0, &canmioclk_lock); + clk = clk_register_mux(NULL, "can1_mio_mux", + can_mio_mux_parents, 54, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 16, 6, 0, &canmioclk_lock); + clks[can0] = clk_register_mux(NULL, clk_output_name[can0], + can0_mio_mux2_parents, 2, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 6, 1, 0, &canmioclk_lock); + clks[can1] = clk_register_mux(NULL, clk_output_name[can1], + can1_mio_mux2_parents, 2, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 22, 1, 0, &canmioclk_lock); + + for (i = 0; i < ARRAY_SIZE(dbgtrc_emio_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + dbgtrc_emio_input_names[i]); + if (idx >= 0) + dbg_emio_mux_parents[i + 1] = of_clk_get_parent_name(np, + idx); + } + clk = clk_register_mux(NULL, "dbg_mux", periph_parents, 4, 0, + SLCR_DBG_CLK_CTRL, 4, 2, 0, &dbgclk_lock); + clk = clk_register_divider(NULL, "dbg_div", "dbg_mux", 0, + SLCR_DBG_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &dbgclk_lock); + clk = clk_register_mux(NULL, "dbg_emio_mux", dbg_emio_mux_parents, 2, 0, + SLCR_DBG_CLK_CTRL, 6, 1, 0, &dbgclk_lock); + clks[dbg_trc] = clk_register_gate(NULL, clk_output_name[dbg_trc], + "dbg_emio_mux", CLK_SET_RATE_PARENT, SLCR_DBG_CLK_CTRL, + 0, 0, &dbgclk_lock); + clks[dbg_apb] = clk_register_gate(NULL, clk_output_name[dbg_apb], + clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0, + &dbgclk_lock); + + /* One gated clock for all APER clocks. */ + clks[dma] = clk_register_gate(NULL, clk_output_name[dma], + clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0, + &aperclk_lock); + clks[usb0_aper] = clk_register_gate(NULL, clk_output_name[usb0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 2, 0, + &aperclk_lock); + clks[usb1_aper] = clk_register_gate(NULL, clk_output_name[usb1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 3, 0, + &aperclk_lock); + clks[gem0_aper] = clk_register_gate(NULL, clk_output_name[gem0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 6, 0, + &aperclk_lock); + clks[gem1_aper] = clk_register_gate(NULL, clk_output_name[gem1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 7, 0, + &aperclk_lock); + clks[sdio0_aper] = clk_register_gate(NULL, clk_output_name[sdio0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 10, 0, + &aperclk_lock); + clks[sdio1_aper] = clk_register_gate(NULL, clk_output_name[sdio1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 11, 0, + &aperclk_lock); + clks[spi0_aper] = clk_register_gate(NULL, clk_output_name[spi0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 14, 0, + &aperclk_lock); + clks[spi1_aper] = clk_register_gate(NULL, clk_output_name[spi1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 15, 0, + &aperclk_lock); + clks[can0_aper] = clk_register_gate(NULL, clk_output_name[can0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 16, 0, + &aperclk_lock); + clks[can1_aper] = clk_register_gate(NULL, clk_output_name[can1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 17, 0, + &aperclk_lock); + clks[i2c0_aper] = clk_register_gate(NULL, clk_output_name[i2c0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 18, 0, + &aperclk_lock); + clks[i2c1_aper] = clk_register_gate(NULL, clk_output_name[i2c1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 19, 0, + &aperclk_lock); + clks[uart0_aper] = clk_register_gate(NULL, clk_output_name[uart0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 20, 0, + &aperclk_lock); + clks[uart1_aper] = clk_register_gate(NULL, clk_output_name[uart1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 21, 0, + &aperclk_lock); + clks[gpio_aper] = clk_register_gate(NULL, clk_output_name[gpio_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 22, 0, + &aperclk_lock); + clks[lqspi_aper] = clk_register_gate(NULL, clk_output_name[lqspi_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 23, 0, + &aperclk_lock); + clks[smc_aper] = clk_register_gate(NULL, clk_output_name[smc_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 24, 0, + &aperclk_lock); + + for (i = 0; i < ARRAY_SIZE(clks); i++) { + if (IS_ERR(clks[i])) { + pr_err("Zynq clk %d: register failed with %ld\n", + i, PTR_ERR(clks[i])); + BUG(); + } + } + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +CLK_OF_DECLARE(zynq_clkc, "xlnx,ps7-clkc", zynq_clk_setup); + +void __init zynq_clock_init(void __iomem *slcr_base) +{ + zynq_slcr_base_priv = slcr_base; + of_clk_init(NULL); +} diff --git a/drivers/clk/zynq/pll.c b/drivers/clk/zynq/pll.c new file mode 100644 index 00000000000..47e307c25a7 --- /dev/null +++ b/drivers/clk/zynq/pll.c @@ -0,0 +1,235 @@ +/* + * Zynq PLL driver + * + * Copyright (C) 2013 Xilinx + * + * Sören Brinkmann <soren.brinkmann@xilinx.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#include <linux/clk/zynq.h> +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> + +/** + * struct zynq_pll + * @hw: Handle between common and hardware-specific interfaces + * @pll_ctrl: PLL control register + * @pll_status: PLL status register + * @lock: Register lock + * @lockbit: Indicates the associated PLL_LOCKED bit in the PLL status + * register. + */ +struct zynq_pll { + struct clk_hw hw; + void __iomem *pll_ctrl; + void __iomem *pll_status; + spinlock_t *lock; + u8 lockbit; +}; +#define to_zynq_pll(_hw) container_of(_hw, struct zynq_pll, hw) + +/* Register bitfield defines */ +#define PLLCTRL_FBDIV_MASK 0x7f000 +#define PLLCTRL_FBDIV_SHIFT 12 +#define PLLCTRL_BPQUAL_MASK (1 << 3) +#define PLLCTRL_PWRDWN_MASK 2 +#define PLLCTRL_PWRDWN_SHIFT 1 +#define PLLCTRL_RESET_MASK 1 +#define PLLCTRL_RESET_SHIFT 0 + +/** + * zynq_pll_round_rate() - Round a clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @rate: Desired clock frequency + * @prate: Clock frequency of parent clock + * Returns frequency closest to @rate the hardware can generate. + */ +static long zynq_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + u32 fbdiv; + + fbdiv = DIV_ROUND_CLOSEST(rate, *prate); + if (fbdiv < 13) + fbdiv = 13; + else if (fbdiv > 66) + fbdiv = 66; + + return *prate * fbdiv; +} + +/** + * zynq_pll_recalc_rate() - Recalculate clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @parent_rate: Clock frequency of parent clock + * Returns current clock frequency. + */ +static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_pll *clk = to_zynq_pll(hw); + u32 fbdiv; + + /* + * makes probably sense to redundantly save fbdiv in the struct + * zynq_pll to save the IO access. + */ + fbdiv = (readl(clk->pll_ctrl) & PLLCTRL_FBDIV_MASK) >> + PLLCTRL_FBDIV_SHIFT; + + return parent_rate * fbdiv; +} + +/** + * zynq_pll_is_enabled - Check if a clock is enabled + * @hw: Handle between common and hardware-specific interfaces + * Returns 1 if the clock is enabled, 0 otherwise. + * + * Not sure this is a good idea, but since disabled means bypassed for + * this clock implementation we say we are always enabled. + */ +static int zynq_pll_is_enabled(struct clk_hw *hw) +{ + unsigned long flags = 0; + u32 reg; + struct zynq_pll *clk = to_zynq_pll(hw); + + spin_lock_irqsave(clk->lock, flags); + + reg = readl(clk->pll_ctrl); + + spin_unlock_irqrestore(clk->lock, flags); + + return !(reg & (PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK)); +} + +/** + * zynq_pll_enable - Enable clock + * @hw: Handle between common and hardware-specific interfaces + * Returns 0 on success + */ +static int zynq_pll_enable(struct clk_hw *hw) +{ + unsigned long flags = 0; + u32 reg; + struct zynq_pll *clk = to_zynq_pll(hw); + + if (zynq_pll_is_enabled(hw)) + return 0; + + pr_info("PLL: enable\n"); + + /* Power up PLL and wait for lock */ + spin_lock_irqsave(clk->lock, flags); + + reg = readl(clk->pll_ctrl); + reg &= ~(PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK); + writel(reg, clk->pll_ctrl); + while (!(readl(clk->pll_status) & (1 << clk->lockbit))) + ; + + spin_unlock_irqrestore(clk->lock, flags); + + return 0; +} + +/** + * zynq_pll_disable - Disable clock + * @hw: Handle between common and hardware-specific interfaces + * Returns 0 on success + */ +static void zynq_pll_disable(struct clk_hw *hw) +{ + unsigned long flags = 0; + u32 reg; + struct zynq_pll *clk = to_zynq_pll(hw); + + if (!zynq_pll_is_enabled(hw)) + return; + + pr_info("PLL: shutdown\n"); + + /* shut down PLL */ + spin_lock_irqsave(clk->lock, flags); + + reg = readl(clk->pll_ctrl); + reg |= PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK; + writel(reg, clk->pll_ctrl); + + spin_unlock_irqrestore(clk->lock, flags); +} + +static const struct clk_ops zynq_pll_ops = { + .enable = zynq_pll_enable, + .disable = zynq_pll_disable, + .is_enabled = zynq_pll_is_enabled, + .round_rate = zynq_pll_round_rate, + .recalc_rate = zynq_pll_recalc_rate +}; + +/** + * clk_register_zynq_pll() - Register PLL with the clock framework + * @np Pointer to the DT device node + */ +struct clk *clk_register_zynq_pll(const char *name, const char *parent, + void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index, + spinlock_t *lock) +{ + struct zynq_pll *pll; + struct clk *clk; + u32 reg; + const char *parent_arr[1] = {parent}; + unsigned long flags = 0; + struct clk_init_data initd = { + .name = name, + .parent_names = parent_arr, + .ops = &zynq_pll_ops, + .num_parents = 1, + .flags = 0 + }; + + pll = kmalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("%s: Could not allocate Zynq PLL clk.\n", __func__); + return ERR_PTR(-ENOMEM); + } + + /* Populate the struct */ + pll->hw.init = &initd; + pll->pll_ctrl = pll_ctrl; + pll->pll_status = pll_status; + pll->lockbit = lock_index; + pll->lock = lock; + + spin_lock_irqsave(pll->lock, flags); + + reg = readl(pll->pll_ctrl); + reg &= ~PLLCTRL_BPQUAL_MASK; + writel(reg, pll->pll_ctrl); + + spin_unlock_irqrestore(pll->lock, flags); + + clk = clk_register(NULL, &pll->hw); + if (WARN_ON(IS_ERR(clk))) + goto free_pll; + + return clk; + +free_pll: + kfree(pll); + + return clk; +} diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index f151c6cf27c..5871933c4e5 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -21,6 +21,8 @@ config DW_APB_TIMER config DW_APB_TIMER_OF bool + select DW_APB_TIMER + select CLKSRC_OF config ARMADA_370_XP_TIMER bool diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c index 685bc60e210..4cbe28c7463 100644 --- a/drivers/clocksource/cadence_ttc_timer.c +++ b/drivers/clocksource/cadence_ttc_timer.c @@ -51,6 +51,8 @@ #define TTC_CNT_CNTRL_DISABLE_MASK 0x1 +#define TTC_CLK_CNTRL_CSRC_MASK (1 << 5) /* clock source */ + /* * Setup the timers to use pre-scaling, using a fixed value for now that will * work across most input frequency, but it may need to be more dynamic @@ -396,8 +398,9 @@ static void __init ttc_timer_init(struct device_node *timer) { unsigned int irq; void __iomem *timer_baseaddr; - struct clk *clk; + struct clk *clk_cs, *clk_ce; static int initialized; + int clksel; if (initialized) return; @@ -421,14 +424,24 @@ static void __init ttc_timer_init(struct device_node *timer) BUG(); } - clk = of_clk_get_by_name(timer, "cpu_1x"); - if (IS_ERR(clk)) { + clksel = __raw_readl(timer_baseaddr + TTC_CLK_CNTRL_OFFSET); + clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK); + clk_cs = of_clk_get(timer, clksel); + if (IS_ERR(clk_cs)) { + pr_err("ERROR: timer input clock not found\n"); + BUG(); + } + + clksel = __raw_readl(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET); + clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK); + clk_ce = of_clk_get(timer, clksel); + if (IS_ERR(clk_ce)) { pr_err("ERROR: timer input clock not found\n"); BUG(); } - ttc_setup_clocksource(clk, timer_baseaddr); - ttc_setup_clockevent(clk, timer_baseaddr + 4, irq); + ttc_setup_clocksource(clk_cs, timer_baseaddr); + ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq); pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq); } diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c index ab09ed3742e..cef554432a3 100644 --- a/drivers/clocksource/dw_apb_timer_of.c +++ b/drivers/clocksource/dw_apb_timer_of.c @@ -20,6 +20,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/clk.h> #include <asm/mach/time.h> #include <asm/sched_clock.h> @@ -27,14 +28,37 @@ static void timer_get_base_and_rate(struct device_node *np, void __iomem **base, u32 *rate) { + struct clk *timer_clk; + struct clk *pclk; + *base = of_iomap(np, 0); if (!*base) panic("Unable to map regs for %s", np->name); + /* + * Not all implementations use a periphal clock, so don't panic + * if it's not present + */ + pclk = of_clk_get_by_name(np, "pclk"); + if (!IS_ERR(pclk)) + if (clk_prepare_enable(pclk)) + pr_warn("pclk for %s is present, but could not be activated\n", + np->name); + + timer_clk = of_clk_get_by_name(np, "timer"); + if (IS_ERR(timer_clk)) + goto try_clock_freq; + + if (!clk_prepare_enable(timer_clk)) { + *rate = clk_get_rate(timer_clk); + return; + } + +try_clock_freq: if (of_property_read_u32(np, "clock-freq", rate) && of_property_read_u32(np, "clock-frequency", rate)) - panic("No clock-frequency property for %s", np->name); + panic("No clock nor clock-frequency property for %s", np->name); } static void add_clockevent(struct device_node *event_timer) @@ -57,6 +81,9 @@ static void add_clockevent(struct device_node *event_timer) dw_apb_clockevent_register(ced); } +static void __iomem *sched_io_base; +static u32 sched_rate; + static void add_clocksource(struct device_node *source_timer) { void __iomem *iobase; @@ -71,9 +98,15 @@ static void add_clocksource(struct device_node *source_timer) dw_apb_clocksource_start(cs); dw_apb_clocksource_register(cs); -} -static void __iomem *sched_io_base; + /* + * Fallback to use the clocksource as sched_clock if no separate + * timer is found. sched_io_base then points to the current_value + * register of the clocksource timer. + */ + sched_io_base = iobase + 0x04; + sched_rate = rate; +} static u32 read_sched_clock(void) { @@ -89,39 +122,37 @@ static const struct of_device_id sptimer_ids[] __initconst = { static void init_sched_clock(void) { struct device_node *sched_timer; - u32 rate; sched_timer = of_find_matching_node(NULL, sptimer_ids); - if (!sched_timer) - panic("No RTC for sched clock to use"); + if (sched_timer) { + timer_get_base_and_rate(sched_timer, &sched_io_base, + &sched_rate); + of_node_put(sched_timer); + } - timer_get_base_and_rate(sched_timer, &sched_io_base, &rate); - of_node_put(sched_timer); - - setup_sched_clock(read_sched_clock, 32, rate); + setup_sched_clock(read_sched_clock, 32, sched_rate); } -static const struct of_device_id osctimer_ids[] __initconst = { - { .compatible = "picochip,pc3x2-timer" }, - { .compatible = "snps,dw-apb-timer-osc" }, - {}, -}; - -void __init dw_apb_timer_init(void) +static int num_called; +static void __init dw_apb_timer_init(struct device_node *timer) { - struct device_node *event_timer, *source_timer; - - event_timer = of_find_matching_node(NULL, osctimer_ids); - if (!event_timer) - panic("No timer for clockevent"); - add_clockevent(event_timer); - - source_timer = of_find_matching_node(event_timer, osctimer_ids); - if (!source_timer) - panic("No timer for clocksource"); - add_clocksource(source_timer); - - of_node_put(source_timer); - - init_sched_clock(); + switch (num_called) { + case 0: + pr_debug("%s: found clockevent timer\n", __func__); + add_clockevent(timer); + of_node_put(timer); + break; + case 1: + pr_debug("%s: found clocksource timer\n", __func__); + add_clocksource(timer); + of_node_put(timer); + init_sched_clock(); + break; + default: + break; + } + + num_called++; } +CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init); +CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer-osc", dw_apb_timer_init); diff --git a/drivers/cpuidle/cpuidle-calxeda.c b/drivers/cpuidle/cpuidle-calxeda.c index 223379169cb..0e6e408c0a6 100644 --- a/drivers/cpuidle/cpuidle-calxeda.c +++ b/drivers/cpuidle/cpuidle-calxeda.c @@ -37,20 +37,6 @@ extern void highbank_set_cpu_jump(int cpu, void *jump_addr); extern void *scu_base_addr; -static inline unsigned int get_auxcr(void) -{ - unsigned int val; - asm("mrc p15, 0, %0, c1, c0, 1 @ get AUXCR" : "=r" (val) : : "cc"); - return val; -} - -static inline void set_auxcr(unsigned int val) -{ - asm volatile("mcr p15, 0, %0, c1, c0, 1 @ set AUXCR" - : : "r" (val) : "cc"); - isb(); -} - static noinline void calxeda_idle_restore(void) { set_cr(get_cr() | CR_C); diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index e9924898043..3215a3cb3de 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -213,7 +213,7 @@ config SIRF_DMA config TI_EDMA tristate "TI EDMA support" - depends on ARCH_DAVINCI + depends on ARCH_DAVINCI || ARCH_OMAP select DMA_ENGINE select DMA_VIRTUAL_CHANNELS default n diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index 3b23061cdb4..9bfaddd57ef 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -22,6 +22,7 @@ #include <linux/uaccess.h> #include <linux/debugfs.h> #include <linux/platform_data/dma-coh901318.h> +#include <linux/of_dma.h> #include "coh901318.h" #include "dmaengine.h" @@ -1788,6 +1789,35 @@ bool coh901318_filter_id(struct dma_chan *chan, void *chan_id) } EXPORT_SYMBOL(coh901318_filter_id); +struct coh901318_filter_args { + struct coh901318_base *base; + unsigned int ch_nr; +}; + +static bool coh901318_filter_base_and_id(struct dma_chan *chan, void *data) +{ + struct coh901318_filter_args *args = data; + + if (&args->base->dma_slave == chan->device && + args->ch_nr == to_coh901318_chan(chan)->id) + return true; + + return false; +} + +static struct dma_chan *coh901318_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct coh901318_filter_args args = { + .base = ofdma->of_dma_data, + .ch_nr = dma_spec->args[0], + }; + dma_cap_mask_t cap; + dma_cap_zero(cap); + dma_cap_set(DMA_SLAVE, cap); + + return dma_request_channel(cap, coh901318_filter_base_and_id, &args); +} /* * DMA channel allocation */ @@ -2735,12 +2765,19 @@ static int __init coh901318_probe(struct platform_device *pdev) if (err) goto err_register_memcpy; + err = of_dma_controller_register(pdev->dev.of_node, coh901318_xlate, + base); + if (err) + goto err_register_of_dma; + platform_set_drvdata(pdev, base); dev_info(&pdev->dev, "Initialized COH901318 DMA on virtual base 0x%08x\n", (u32) base->virtbase); return err; + err_register_of_dma: + dma_async_device_unregister(&base->dma_memcpy); err_register_memcpy: dma_async_device_unregister(&base->dma_slave); err_register_slave: @@ -2752,17 +2789,23 @@ static int coh901318_remove(struct platform_device *pdev) { struct coh901318_base *base = platform_get_drvdata(pdev); + of_dma_controller_free(pdev->dev.of_node); dma_async_device_unregister(&base->dma_memcpy); dma_async_device_unregister(&base->dma_slave); coh901318_pool_destroy(&base->pool); return 0; } +static const struct of_device_id coh901318_dt_match[] = { + { .compatible = "stericsson,coh901318" }, + {}, +}; static struct platform_driver coh901318_driver = { .remove = coh901318_remove, .driver = { .name = "coh901318", + .of_match_table = coh901318_dt_match, }, }; diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index cd7e3280fad..5f3e532436e 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -24,7 +24,7 @@ #include <linux/slab.h> #include <linux/spinlock.h> -#include <mach/edma.h> +#include <linux/platform_data/edma.h> #include "dmaengine.h" #include "virt-dma.h" diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 847a6dc15a5..94624370caa 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -109,8 +109,11 @@ config GPIO_MAX730X comment "Memory mapped GPIO drivers:" config GPIO_CLPS711X - def_bool y + tristate "CLPS711X GPIO support" depends on ARCH_CLPS711X + select GPIO_GENERIC + help + Say yes here to support GPIO on CLPS711X SoCs. config GPIO_GENERIC_PLATFORM tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" @@ -209,6 +212,13 @@ config GPIO_RCAR help Say yes here to support GPIO on Renesas R-Car SoCs. +config GPIO_SAMSUNG + bool + depends on PLAT_SAMSUNG + help + Legacy GPIO support. Use only for platforms without support for + pinctrl. + config GPIO_SPEAR_SPICS bool "ST SPEAr13xx SPI Chip Select as GPIO support" depends on PLAT_SPEAR diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 0cb2d656ad1..ef3e983a2f1 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -59,7 +59,7 @@ obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o -obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o +obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c index ce63b75b13f..0edaf2ce926 100644 --- a/drivers/gpio/gpio-clps711x.c +++ b/drivers/gpio/gpio-clps711x.c @@ -1,7 +1,7 @@ /* * CLPS711X GPIO driver * - * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * Copyright (C) 2012,2013 Alexander Shiyan <shc_work@mail.ru> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -9,191 +9,91 @@ * (at your option) any later version. */ -#include <linux/io.h> -#include <linux/slab.h> +#include <linux/err.h> #include <linux/gpio.h> #include <linux/module.h> -#include <linux/spinlock.h> +#include <linux/basic_mmio_gpio.h> #include <linux/platform_device.h> -#include <mach/hardware.h> - -#define CLPS711X_GPIO_PORTS 5 -#define CLPS711X_GPIO_NAME "gpio-clps711x" - -struct clps711x_gpio { - struct gpio_chip chip[CLPS711X_GPIO_PORTS]; - spinlock_t lock; -}; - -static void __iomem *clps711x_ports[] = { - CLPS711X_VIRT_BASE + PADR, - CLPS711X_VIRT_BASE + PBDR, - CLPS711X_VIRT_BASE + PCDR, - CLPS711X_VIRT_BASE + PDDR, - CLPS711X_VIRT_BASE + PEDR, -}; - -static void __iomem *clps711x_pdirs[] = { - CLPS711X_VIRT_BASE + PADDR, - CLPS711X_VIRT_BASE + PBDDR, - CLPS711X_VIRT_BASE + PCDDR, - CLPS711X_VIRT_BASE + PDDDR, - CLPS711X_VIRT_BASE + PEDDR, -}; - -#define clps711x_port(x) clps711x_ports[x->base / 8] -#define clps711x_pdir(x) clps711x_pdirs[x->base / 8] - -static int gpio_clps711x_get(struct gpio_chip *chip, unsigned offset) +static int clps711x_gpio_probe(struct platform_device *pdev) { - return !!(readb(clps711x_port(chip)) & (1 << offset)); -} + struct device_node *np = pdev->dev.of_node; + void __iomem *dat, *dir; + struct bgpio_chip *bgc; + struct resource *res; + int err, id = np ? of_alias_get_id(np, "gpio") : pdev->id; -static void gpio_clps711x_set(struct gpio_chip *chip, unsigned offset, - int value) -{ - int tmp; - unsigned long flags; - struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev); - - spin_lock_irqsave(&gpio->lock, flags); - tmp = readb(clps711x_port(chip)) & ~(1 << offset); - if (value) - tmp |= 1 << offset; - writeb(tmp, clps711x_port(chip)); - spin_unlock_irqrestore(&gpio->lock, flags); -} - -static int gpio_clps711x_dir_in(struct gpio_chip *chip, unsigned offset) -{ - int tmp; - unsigned long flags; - struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev); + if ((id < 0) || (id > 4)) + return -ENODEV; - spin_lock_irqsave(&gpio->lock, flags); - tmp = readb(clps711x_pdir(chip)) & ~(1 << offset); - writeb(tmp, clps711x_pdir(chip)); - spin_unlock_irqrestore(&gpio->lock, flags); + bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL); + if (!bgc) + return -ENOMEM; - return 0; -} + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dat = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dat)) + return PTR_ERR(dat); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + dir = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dir)) + return PTR_ERR(dir); + + switch (id) { + case 3: + /* PORTD is inverted logic for direction register */ + err = bgpio_init(bgc, &pdev->dev, 1, dat, NULL, NULL, + NULL, dir, 0); + break; + default: + err = bgpio_init(bgc, &pdev->dev, 1, dat, NULL, NULL, + dir, NULL, 0); + break; + } -static int gpio_clps711x_dir_out(struct gpio_chip *chip, unsigned offset, - int value) -{ - int tmp; - unsigned long flags; - struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev); - - spin_lock_irqsave(&gpio->lock, flags); - tmp = readb(clps711x_pdir(chip)) | (1 << offset); - writeb(tmp, clps711x_pdir(chip)); - tmp = readb(clps711x_port(chip)) & ~(1 << offset); - if (value) - tmp |= 1 << offset; - writeb(tmp, clps711x_port(chip)); - spin_unlock_irqrestore(&gpio->lock, flags); - - return 0; -} + if (err) + return err; -static int gpio_clps711x_dir_in_inv(struct gpio_chip *chip, unsigned offset) -{ - int tmp; - unsigned long flags; - struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev); + switch (id) { + case 4: + /* PORTE is 3 lines only */ + bgc->gc.ngpio = 3; + break; + default: + break; + } - spin_lock_irqsave(&gpio->lock, flags); - tmp = readb(clps711x_pdir(chip)) | (1 << offset); - writeb(tmp, clps711x_pdir(chip)); - spin_unlock_irqrestore(&gpio->lock, flags); + bgc->gc.base = id * 8; + platform_set_drvdata(pdev, bgc); - return 0; + return gpiochip_add(&bgc->gc); } -static int gpio_clps711x_dir_out_inv(struct gpio_chip *chip, unsigned offset, - int value) +static int clps711x_gpio_remove(struct platform_device *pdev) { - int tmp; - unsigned long flags; - struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev); - - spin_lock_irqsave(&gpio->lock, flags); - tmp = readb(clps711x_pdir(chip)) & ~(1 << offset); - writeb(tmp, clps711x_pdir(chip)); - tmp = readb(clps711x_port(chip)) & ~(1 << offset); - if (value) - tmp |= 1 << offset; - writeb(tmp, clps711x_port(chip)); - spin_unlock_irqrestore(&gpio->lock, flags); - - return 0; + struct bgpio_chip *bgc = platform_get_drvdata(pdev); + + return bgpio_remove(bgc); } -static struct { - char *name; - int nr; - int inv_dir; -} clps711x_gpio_ports[] __initconst = { - { "PORTA", 8, 0, }, - { "PORTB", 8, 0, }, - { "PORTC", 8, 0, }, - { "PORTD", 8, 1, }, - { "PORTE", 3, 0, }, +static const struct of_device_id clps711x_gpio_ids[] = { + { .compatible = "cirrus,clps711x-gpio" }, + { } }; +MODULE_DEVICE_TABLE(of, clps711x_gpio_ids); + +static struct platform_driver clps711x_gpio_driver = { + .driver = { + .name = "clps711x-gpio", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(clps711x_gpio_ids), + }, + .probe = clps711x_gpio_probe, + .remove = clps711x_gpio_remove, +}; +module_platform_driver(clps711x_gpio_driver); -static int __init gpio_clps711x_init(void) -{ - int i; - struct platform_device *pdev; - struct clps711x_gpio *gpio; - - pdev = platform_device_alloc(CLPS711X_GPIO_NAME, 0); - if (!pdev) { - pr_err("Cannot create platform device: %s\n", - CLPS711X_GPIO_NAME); - return -ENOMEM; - } - - platform_device_add(pdev); - - gpio = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_gpio), - GFP_KERNEL); - if (!gpio) { - dev_err(&pdev->dev, "GPIO allocating memory error\n"); - platform_device_unregister(pdev); - return -ENOMEM; - } - - platform_set_drvdata(pdev, gpio); - - spin_lock_init(&gpio->lock); - - for (i = 0; i < CLPS711X_GPIO_PORTS; i++) { - gpio->chip[i].owner = THIS_MODULE; - gpio->chip[i].dev = &pdev->dev; - gpio->chip[i].label = clps711x_gpio_ports[i].name; - gpio->chip[i].base = i * 8; - gpio->chip[i].ngpio = clps711x_gpio_ports[i].nr; - gpio->chip[i].get = gpio_clps711x_get; - gpio->chip[i].set = gpio_clps711x_set; - if (!clps711x_gpio_ports[i].inv_dir) { - gpio->chip[i].direction_input = gpio_clps711x_dir_in; - gpio->chip[i].direction_output = gpio_clps711x_dir_out; - } else { - gpio->chip[i].direction_input = gpio_clps711x_dir_in_inv; - gpio->chip[i].direction_output = gpio_clps711x_dir_out_inv; - } - WARN_ON(gpiochip_add(&gpio->chip[i])); - } - - dev_info(&pdev->dev, "GPIO driver initialized\n"); - - return 0; -} -arch_initcall(gpio_clps711x_init); - -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); MODULE_DESCRIPTION("CLPS711X GPIO driver"); diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index b4ca450947b..d173d56dbb8 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -49,6 +49,7 @@ struct gpio_rcar_priv { #define POSNEG 0x20 #define EDGLEVEL 0x24 #define FILONOFF 0x28 +#define BOTHEDGE 0x4c static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs) { @@ -91,7 +92,8 @@ static void gpio_rcar_irq_enable(struct irq_data *d) static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, unsigned int hwirq, bool active_high_rising_edge, - bool level_trigger) + bool level_trigger, + bool both) { unsigned long flags; @@ -108,6 +110,10 @@ static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, /* Configure edge or level trigger in EDGLEVEL */ gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger); + /* Select one edge or both edges in BOTHEDGE */ + if (p->config.has_both_edge_trigger) + gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both); + /* Select "Interrupt Input Mode" in IOINTSEL */ gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true); @@ -127,16 +133,26 @@ static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type) switch (type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_LEVEL_HIGH: - gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true); + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true, + false); break; case IRQ_TYPE_LEVEL_LOW: - gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true); + gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true, + false); break; case IRQ_TYPE_EDGE_RISING: - gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false); + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, + false); break; case IRQ_TYPE_EDGE_FALLING: - gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false); + gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false, + false); + break; + case IRQ_TYPE_EDGE_BOTH: + if (!p->config.has_both_edge_trigger) + return -EINVAL; + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, + true); break; default: return -EINVAL; @@ -333,7 +349,7 @@ static int gpio_rcar_probe(struct platform_device *pdev) } if (devm_request_irq(&pdev->dev, irq->start, - gpio_rcar_irq_handler, 0, name, p)) { + gpio_rcar_irq_handler, IRQF_SHARED, name, p)) { dev_err(&pdev->dev, "failed to request IRQ\n"); ret = -ENOENT; goto err1; diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 0a6f941133f..d1a6b204af0 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -17,6 +17,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/of_i2c.h> /* the name of this kernel module */ #define NAME "stu300" @@ -867,7 +868,6 @@ stu300_probe(struct platform_device *pdev) struct resource *res; int bus_nr; int ret = 0; - char clk_name[] = "I2C0"; dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL); if (!dev) { @@ -876,8 +876,7 @@ stu300_probe(struct platform_device *pdev) } bus_nr = pdev->id; - clk_name[3] += (char)bus_nr; - dev->clk = devm_clk_get(&pdev->dev, clk_name); + dev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { dev_err(&pdev->dev, "could not retrieve i2c bus clock\n"); return PTR_ERR(dev->clk); @@ -923,6 +922,7 @@ stu300_probe(struct platform_device *pdev) adap->nr = bus_nr; adap->algo = &stu300_algo; adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; i2c_set_adapdata(adap, dev); /* i2c device drivers may be active on return from add_adapter() */ @@ -934,6 +934,10 @@ stu300_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, dev); + dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n", + dev->virtbase, dev->irq); + of_i2c_register_devices(adap); + return 0; } @@ -978,11 +982,17 @@ stu300_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id stu300_dt_match[] = { + { .compatible = "st,ddci2c" }, + {}, +}; + static struct platform_driver stu300_i2c_driver = { .driver = { .name = NAME, .owner = THIS_MODULE, .pm = STU300_I2C_PM, + .of_match_table = stu300_dt_match, }, .remove = __exit_p(stu300_remove), diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 0494d2769fd..bce695d42f1 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -159,7 +159,7 @@ config VIDEO_MEM2MEM_DEINTERLACE config VIDEO_SAMSUNG_S5P_G2D tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" - depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS) select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV default n @@ -169,7 +169,7 @@ config VIDEO_SAMSUNG_S5P_G2D config VIDEO_SAMSUNG_S5P_JPEG tristate "Samsung S5P/Exynos4 JPEG codec driver" - depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS) select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV ---help--- @@ -177,7 +177,7 @@ config VIDEO_SAMSUNG_S5P_JPEG config VIDEO_SAMSUNG_S5P_MFC tristate "Samsung S5P MFC Video Codec" - depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS) select VIDEOBUF2_DMA_CONTIG default n help diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index 6ff99b5849f..004fd0b4e9d 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -1,7 +1,8 @@ config VIDEO_SAMSUNG_EXYNOS4_IS bool "Samsung S5P/EXYNOS4 SoC series Camera Subsystem driver" - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && PLAT_S5P && PM_RUNTIME + depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && PM_RUNTIME + depends on (PLAT_S5P || ARCH_EXYNOS) help Say Y here to enable camera host interface devices for Samsung S5P and EXYNOS SoC series. diff --git a/drivers/media/platform/s5p-tv/Kconfig b/drivers/media/platform/s5p-tv/Kconfig index 7b659bd09bf..369a4c191e1 100644 --- a/drivers/media/platform/s5p-tv/Kconfig +++ b/drivers/media/platform/s5p-tv/Kconfig @@ -8,7 +8,7 @@ config VIDEO_SAMSUNG_S5P_TV bool "Samsung TV driver for S5P platform" - depends on PLAT_S5P && PM_RUNTIME + depends on (PLAT_S5P || ARCH_EXYNOS) && PM_RUNTIME default n ---help--- Say Y here to enable selecting the TV output devices for diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index 962a6e17a01..1a31512369f 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -159,6 +159,9 @@ static int syscon_probe(struct platform_device *pdev) static const struct platform_device_id syscon_ids[] = { { "syscon", }, +#ifdef CONFIG_ARCH_CLPS711X + { "clps711x-syscon", }, +#endif { } }; diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index 3946a0eb3a0..5dfb70c669d 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -37,6 +37,7 @@ #include <linux/of.h> #include <linux/of_device.h> +#include <linux/platform_data/edma.h> #include <linux/platform_data/mmc-davinci.h> /* diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index bed9d58d574..8b27ca054c5 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -297,13 +297,6 @@ config MTD_IXP4XX IXDP425 and Coyote. If you have an IXP4xx based board and would like to use the flash chips on it, say 'Y'. -config MTD_AUTCPU12 - bool "NV-RAM mapping AUTCPU12 board" - depends on ARCH_AUTCPU12 - help - This enables access to the NV-RAM on autronix autcpu12 board. - If you have such a board, say 'Y'. - config MTD_IMPA7 tristate "JEDEC Flash device mapped on impA7" depends on ARM && MTD_JEDECPROBE diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 395a1244404..9fdbd4ba644 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_MTD_VMAX) += vmax301.o obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o -obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o obj-$(CONFIG_MTD_IMPA7) += impa7.o obj-$(CONFIG_MTD_UCLINUX) += uclinux.o obj-$(CONFIG_MTD_NETtel) += nettel.o diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c deleted file mode 100644 index c3525d2a2fa..00000000000 --- a/drivers/mtd/maps/autcpu12-nvram.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * NV-RAM memory access on autcpu12 - * (C) 2002 Thomas Gleixner (gleixner@autronix.de) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/err.h> -#include <linux/sizes.h> - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/module.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> - -struct autcpu12_nvram_priv { - struct mtd_info *mtd; - struct map_info map; -}; - -static int autcpu12_nvram_probe(struct platform_device *pdev) -{ - map_word tmp, save0, save1; - struct resource *res; - struct autcpu12_nvram_priv *priv; - - priv = devm_kzalloc(&pdev->dev, - sizeof(struct autcpu12_nvram_priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - platform_set_drvdata(pdev, priv); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get memory resource\n"); - return -ENOENT; - } - - priv->map.bankwidth = 4; - priv->map.phys = res->start; - priv->map.size = resource_size(res); - priv->map.virt = devm_ioremap_resource(&pdev->dev, res); - strcpy((char *)priv->map.name, res->name); - if (IS_ERR(priv->map.virt)) - return PTR_ERR(priv->map.virt); - - simple_map_init(&priv->map); - - /* - * Check for 32K/128K - * read ofs 0 - * read ofs 0x10000 - * Write complement to ofs 0x100000 - * Read and check result on ofs 0x0 - * Restore contents - */ - save0 = map_read(&priv->map, 0); - save1 = map_read(&priv->map, 0x10000); - tmp.x[0] = ~save0.x[0]; - map_write(&priv->map, tmp, 0x10000); - tmp = map_read(&priv->map, 0); - /* if we find this pattern on 0x0, we have 32K size */ - if (!map_word_equal(&priv->map, tmp, save0)) { - map_write(&priv->map, save0, 0x0); - priv->map.size = SZ_32K; - } else - map_write(&priv->map, save1, 0x10000); - - priv->mtd = do_map_probe("map_ram", &priv->map); - if (!priv->mtd) { - dev_err(&pdev->dev, "probing failed\n"); - return -ENXIO; - } - - priv->mtd->owner = THIS_MODULE; - priv->mtd->erasesize = 16; - priv->mtd->dev.parent = &pdev->dev; - if (!mtd_device_register(priv->mtd, NULL, 0)) { - dev_info(&pdev->dev, - "NV-RAM device size %ldKiB registered on AUTCPU12\n", - priv->map.size / SZ_1K); - return 0; - } - - map_destroy(priv->mtd); - dev_err(&pdev->dev, "NV-RAM device addition failed\n"); - return -ENOMEM; -} - -static int autcpu12_nvram_remove(struct platform_device *pdev) -{ - struct autcpu12_nvram_priv *priv = platform_get_drvdata(pdev); - - mtd_device_unregister(priv->mtd); - map_destroy(priv->mtd); - - return 0; -} - -static struct platform_driver autcpu12_nvram_driver = { - .driver = { - .name = "autcpu12_nvram", - .owner = THIS_MODULE, - }, - .probe = autcpu12_nvram_probe, - .remove = autcpu12_nvram_remove, -}; -module_platform_driver(autcpu12_nvram_driver); - -MODULE_AUTHOR("Thomas Gleixner"); -MODULE_DESCRIPTION("autcpu12 NVRAM map driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 77497f140d6..81944fb7311 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -117,3 +117,5 @@ config PCI_IOAPIC config PCI_LABEL def_bool y if (DMI || ACPI) select NLS + +source "drivers/pci/host/Kconfig" diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 0c3efcffa83..6ebf5bf8e7a 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -67,3 +67,6 @@ obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o obj-$(CONFIG_OF) += of.o ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG + +# PCI host controller drivers +obj-y += host/ diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig new file mode 100644 index 00000000000..1184ff6fe86 --- /dev/null +++ b/drivers/pci/host/Kconfig @@ -0,0 +1,17 @@ +menu "PCI host controller drivers" + depends on PCI + +config PCI_MVEBU + bool "Marvell EBU PCIe controller" + depends on ARCH_MVEBU || ARCH_KIRKWOOD + +config PCIE_DW + bool + +config PCI_EXYNOS + bool "Samsung Exynos PCIe controller" + depends on SOC_EXYNOS5440 + select PCIEPORTBUS + select PCIE_DW + +endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile new file mode 100644 index 00000000000..086d8500e84 --- /dev/null +++ b/drivers/pci/host/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o +obj-$(CONFIG_PCIE_DW) += pcie-designware.o diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c new file mode 100644 index 00000000000..13a633b1612 --- /dev/null +++ b/drivers/pci/host/pci-mvebu.c @@ -0,0 +1,914 @@ +/* + * PCIe driver for Marvell Armada 370 and Armada XP SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/mbus.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/of_pci.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +/* + * PCIe unit register offsets. + */ +#define PCIE_DEV_ID_OFF 0x0000 +#define PCIE_CMD_OFF 0x0004 +#define PCIE_DEV_REV_OFF 0x0008 +#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) +#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) +#define PCIE_HEADER_LOG_4_OFF 0x0128 +#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4)) +#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) +#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) +#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) +#define PCIE_WIN5_CTRL_OFF 0x1880 +#define PCIE_WIN5_BASE_OFF 0x1884 +#define PCIE_WIN5_REMAP_OFF 0x188c +#define PCIE_CONF_ADDR_OFF 0x18f8 +#define PCIE_CONF_ADDR_EN 0x80000000 +#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) +#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) +#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) +#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8) +#define PCIE_CONF_ADDR(bus, devfn, where) \ + (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \ + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \ + PCIE_CONF_ADDR_EN) +#define PCIE_CONF_DATA_OFF 0x18fc +#define PCIE_MASK_OFF 0x1910 +#define PCIE_MASK_ENABLE_INTS 0x0f000000 +#define PCIE_CTRL_OFF 0x1a00 +#define PCIE_CTRL_X1_MODE 0x0001 +#define PCIE_STAT_OFF 0x1a04 +#define PCIE_STAT_BUS 0xff00 +#define PCIE_STAT_DEV 0x1f0000 +#define PCIE_STAT_LINK_DOWN BIT(0) +#define PCIE_DEBUG_CTRL 0x1a60 +#define PCIE_DEBUG_SOFT_RESET BIT(20) + +/* + * This product ID is registered by Marvell, and used when the Marvell + * SoC is not the root complex, but an endpoint on the PCIe bus. It is + * therefore safe to re-use this PCI ID for our emulated PCI-to-PCI + * bridge. + */ +#define MARVELL_EMULATED_PCI_PCI_BRIDGE_ID 0x7846 + +/* PCI configuration space of a PCI-to-PCI bridge */ +struct mvebu_sw_pci_bridge { + u16 vendor; + u16 device; + u16 command; + u16 class; + u8 interface; + u8 revision; + u8 bist; + u8 header_type; + u8 latency_timer; + u8 cache_line_size; + u32 bar[2]; + u8 primary_bus; + u8 secondary_bus; + u8 subordinate_bus; + u8 secondary_latency_timer; + u8 iobase; + u8 iolimit; + u16 secondary_status; + u16 membase; + u16 memlimit; + u16 prefmembase; + u16 prefmemlimit; + u32 prefbaseupper; + u32 preflimitupper; + u16 iobaseupper; + u16 iolimitupper; + u8 cappointer; + u8 reserved1; + u16 reserved2; + u32 romaddr; + u8 intline; + u8 intpin; + u16 bridgectrl; +}; + +struct mvebu_pcie_port; + +/* Structure representing all PCIe interfaces */ +struct mvebu_pcie { + struct platform_device *pdev; + struct mvebu_pcie_port *ports; + struct resource io; + struct resource realio; + struct resource mem; + struct resource busn; + int nports; +}; + +/* Structure representing one PCIe interface */ +struct mvebu_pcie_port { + char *name; + void __iomem *base; + spinlock_t conf_lock; + int haslink; + u32 port; + u32 lane; + int devfn; + struct clk *clk; + struct mvebu_sw_pci_bridge bridge; + struct device_node *dn; + struct mvebu_pcie *pcie; + phys_addr_t memwin_base; + size_t memwin_size; + phys_addr_t iowin_base; + size_t iowin_size; +}; + +static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port) +{ + return !(readl(port->base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); +} + +static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr) +{ + u32 stat; + + stat = readl(port->base + PCIE_STAT_OFF); + stat &= ~PCIE_STAT_BUS; + stat |= nr << 8; + writel(stat, port->base + PCIE_STAT_OFF); +} + +static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr) +{ + u32 stat; + + stat = readl(port->base + PCIE_STAT_OFF); + stat &= ~PCIE_STAT_DEV; + stat |= nr << 16; + writel(stat, port->base + PCIE_STAT_OFF); +} + +/* + * Setup PCIE BARs and Address Decode Wins: + * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks + * WIN[0-3] -> DRAM bank[0-3] + */ +static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) +{ + const struct mbus_dram_target_info *dram; + u32 size; + int i; + + dram = mv_mbus_dram_info(); + + /* First, disable and clear BARs and windows. */ + for (i = 1; i < 3; i++) { + writel(0, port->base + PCIE_BAR_CTRL_OFF(i)); + writel(0, port->base + PCIE_BAR_LO_OFF(i)); + writel(0, port->base + PCIE_BAR_HI_OFF(i)); + } + + for (i = 0; i < 5; i++) { + writel(0, port->base + PCIE_WIN04_CTRL_OFF(i)); + writel(0, port->base + PCIE_WIN04_BASE_OFF(i)); + writel(0, port->base + PCIE_WIN04_REMAP_OFF(i)); + } + + writel(0, port->base + PCIE_WIN5_CTRL_OFF); + writel(0, port->base + PCIE_WIN5_BASE_OFF); + writel(0, port->base + PCIE_WIN5_REMAP_OFF); + + /* Setup windows for DDR banks. Count total DDR size on the fly. */ + size = 0; + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + + writel(cs->base & 0xffff0000, + port->base + PCIE_WIN04_BASE_OFF(i)); + writel(0, port->base + PCIE_WIN04_REMAP_OFF(i)); + writel(((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + port->base + PCIE_WIN04_CTRL_OFF(i)); + + size += cs->size; + } + + /* Round up 'size' to the nearest power of two. */ + if ((size & (size - 1)) != 0) + size = 1 << fls(size); + + /* Setup BAR[1] to all DRAM banks. */ + writel(dram->cs[0].base, port->base + PCIE_BAR_LO_OFF(1)); + writel(0, port->base + PCIE_BAR_HI_OFF(1)); + writel(((size - 1) & 0xffff0000) | 1, + port->base + PCIE_BAR_CTRL_OFF(1)); +} + +static void __init mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) +{ + u16 cmd; + u32 mask; + + /* Point PCIe unit MBUS decode windows to DRAM space. */ + mvebu_pcie_setup_wins(port); + + /* Master + slave enable. */ + cmd = readw(port->base + PCIE_CMD_OFF); + cmd |= PCI_COMMAND_IO; + cmd |= PCI_COMMAND_MEMORY; + cmd |= PCI_COMMAND_MASTER; + writew(cmd, port->base + PCIE_CMD_OFF); + + /* Enable interrupt lines A-D. */ + mask = readl(port->base + PCIE_MASK_OFF); + mask |= PCIE_MASK_ENABLE_INTS; + writel(mask, port->base + PCIE_MASK_OFF); +} + +static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, + struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + writel(PCIE_CONF_ADDR(bus->number, devfn, where), + port->base + PCIE_CONF_ADDR_OFF); + + *val = readl(port->base + PCIE_CONF_DATA_OFF); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, + struct pci_bus *bus, + u32 devfn, int where, int size, u32 val) +{ + int ret = PCIBIOS_SUCCESSFUL; + + writel(PCIE_CONF_ADDR(bus->number, devfn, where), + port->base + PCIE_CONF_ADDR_OFF); + + if (size == 4) + writel(val, port->base + PCIE_CONF_DATA_OFF); + else if (size == 2) + writew(val, port->base + PCIE_CONF_DATA_OFF + (where & 3)); + else if (size == 1) + writeb(val, port->base + PCIE_CONF_DATA_OFF + (where & 3)); + else + ret = PCIBIOS_BAD_REGISTER_NUMBER; + + return ret; +} + +static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) +{ + phys_addr_t iobase; + + /* Are the new iobase/iolimit values invalid? */ + if (port->bridge.iolimit < port->bridge.iobase || + port->bridge.iolimitupper < port->bridge.iobaseupper) { + + /* If a window was configured, remove it */ + if (port->iowin_base) { + mvebu_mbus_del_window(port->iowin_base, + port->iowin_size); + port->iowin_base = 0; + port->iowin_size = 0; + } + + return; + } + + /* + * We read the PCI-to-PCI bridge emulated registers, and + * calculate the base address and size of the address decoding + * window to setup, according to the PCI-to-PCI bridge + * specifications. iobase is the bus address, port->iowin_base + * is the CPU address. + */ + iobase = ((port->bridge.iobase & 0xF0) << 8) | + (port->bridge.iobaseupper << 16); + port->iowin_base = port->pcie->io.start + iobase; + port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | + (port->bridge.iolimitupper << 16)) - + iobase); + + mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base, + port->iowin_size, + iobase, + MVEBU_MBUS_PCI_IO); + + pci_ioremap_io(iobase, port->iowin_base); +} + +static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) +{ + /* Are the new membase/memlimit values invalid? */ + if (port->bridge.memlimit < port->bridge.membase) { + + /* If a window was configured, remove it */ + if (port->memwin_base) { + mvebu_mbus_del_window(port->memwin_base, + port->memwin_size); + port->memwin_base = 0; + port->memwin_size = 0; + } + + return; + } + + /* + * We read the PCI-to-PCI bridge emulated registers, and + * calculate the base address and size of the address decoding + * window to setup, according to the PCI-to-PCI bridge + * specifications. + */ + port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16); + port->memwin_size = + (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - + port->memwin_base; + + mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base, + port->memwin_size, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); +} + +/* + * Initialize the configuration space of the PCI-to-PCI bridge + * associated with the given PCIe interface. + */ +static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port) +{ + struct mvebu_sw_pci_bridge *bridge = &port->bridge; + + memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge)); + + bridge->class = PCI_CLASS_BRIDGE_PCI; + bridge->vendor = PCI_VENDOR_ID_MARVELL; + bridge->device = MARVELL_EMULATED_PCI_PCI_BRIDGE_ID; + bridge->header_type = PCI_HEADER_TYPE_BRIDGE; + bridge->cache_line_size = 0x10; + + /* We support 32 bits I/O addressing */ + bridge->iobase = PCI_IO_RANGE_TYPE_32; + bridge->iolimit = PCI_IO_RANGE_TYPE_32; +} + +/* + * Read the configuration space of the PCI-to-PCI bridge associated to + * the given PCIe interface. + */ +static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port, + unsigned int where, int size, u32 *value) +{ + struct mvebu_sw_pci_bridge *bridge = &port->bridge; + + switch (where & ~3) { + case PCI_VENDOR_ID: + *value = bridge->device << 16 | bridge->vendor; + break; + + case PCI_COMMAND: + *value = bridge->command; + break; + + case PCI_CLASS_REVISION: + *value = bridge->class << 16 | bridge->interface << 8 | + bridge->revision; + break; + + case PCI_CACHE_LINE_SIZE: + *value = bridge->bist << 24 | bridge->header_type << 16 | + bridge->latency_timer << 8 | bridge->cache_line_size; + break; + + case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1: + *value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4]; + break; + + case PCI_PRIMARY_BUS: + *value = (bridge->secondary_latency_timer << 24 | + bridge->subordinate_bus << 16 | + bridge->secondary_bus << 8 | + bridge->primary_bus); + break; + + case PCI_IO_BASE: + *value = (bridge->secondary_status << 16 | + bridge->iolimit << 8 | + bridge->iobase); + break; + + case PCI_MEMORY_BASE: + *value = (bridge->memlimit << 16 | bridge->membase); + break; + + case PCI_PREF_MEMORY_BASE: + *value = (bridge->prefmemlimit << 16 | bridge->prefmembase); + break; + + case PCI_PREF_BASE_UPPER32: + *value = bridge->prefbaseupper; + break; + + case PCI_PREF_LIMIT_UPPER32: + *value = bridge->preflimitupper; + break; + + case PCI_IO_BASE_UPPER16: + *value = (bridge->iolimitupper << 16 | bridge->iobaseupper); + break; + + case PCI_ROM_ADDRESS1: + *value = 0; + break; + + default: + *value = 0xffffffff; + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + if (size == 2) + *value = (*value >> (8 * (where & 3))) & 0xffff; + else if (size == 1) + *value = (*value >> (8 * (where & 3))) & 0xff; + + return PCIBIOS_SUCCESSFUL; +} + +/* Write to the PCI-to-PCI bridge configuration space */ +static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port, + unsigned int where, int size, u32 value) +{ + struct mvebu_sw_pci_bridge *bridge = &port->bridge; + u32 mask, reg; + int err; + + if (size == 4) + mask = 0x0; + else if (size == 2) + mask = ~(0xffff << ((where & 3) * 8)); + else if (size == 1) + mask = ~(0xff << ((where & 3) * 8)); + else + return PCIBIOS_BAD_REGISTER_NUMBER; + + err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, ®); + if (err) + return err; + + value = (reg & mask) | value << ((where & 3) * 8); + + switch (where & ~3) { + case PCI_COMMAND: + bridge->command = value & 0xffff; + break; + + case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1: + bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value; + break; + + case PCI_IO_BASE: + /* + * We also keep bit 1 set, it is a read-only bit that + * indicates we support 32 bits addressing for the + * I/O + */ + bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32; + bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32; + bridge->secondary_status = value >> 16; + mvebu_pcie_handle_iobase_change(port); + break; + + case PCI_MEMORY_BASE: + bridge->membase = value & 0xffff; + bridge->memlimit = value >> 16; + mvebu_pcie_handle_membase_change(port); + break; + + case PCI_PREF_MEMORY_BASE: + bridge->prefmembase = value & 0xffff; + bridge->prefmemlimit = value >> 16; + break; + + case PCI_PREF_BASE_UPPER32: + bridge->prefbaseupper = value; + break; + + case PCI_PREF_LIMIT_UPPER32: + bridge->preflimitupper = value; + break; + + case PCI_IO_BASE_UPPER16: + bridge->iobaseupper = value & 0xffff; + bridge->iolimitupper = value >> 16; + mvebu_pcie_handle_iobase_change(port); + break; + + case PCI_PRIMARY_BUS: + bridge->primary_bus = value & 0xff; + bridge->secondary_bus = (value >> 8) & 0xff; + bridge->subordinate_bus = (value >> 16) & 0xff; + bridge->secondary_latency_timer = (value >> 24) & 0xff; + mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus); + break; + + default: + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + +static struct mvebu_pcie_port * +mvebu_pcie_find_port(struct mvebu_pcie *pcie, struct pci_bus *bus, + int devfn) +{ + int i; + + for (i = 0; i < pcie->nports; i++) { + struct mvebu_pcie_port *port = &pcie->ports[i]; + if (bus->number == 0 && port->devfn == devfn) + return port; + if (bus->number != 0 && + bus->number >= port->bridge.secondary_bus && + bus->number <= port->bridge.subordinate_bus) + return port; + } + + return NULL; +} + +/* PCI configuration space write function */ +static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata); + struct mvebu_pcie_port *port; + unsigned long flags; + int ret; + + port = mvebu_pcie_find_port(pcie, bus, devfn); + if (!port) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Access the emulated PCI-to-PCI bridge */ + if (bus->number == 0) + return mvebu_sw_pci_bridge_write(port, where, size, val); + + if (!port->haslink) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * On the secondary bus, we don't want to expose any other + * device than the device physically connected in the PCIe + * slot, visible in slot 0. In slot 1, there's a special + * Marvell device that only makes sense when the Armada is + * used as a PCIe endpoint. + */ + if (bus->number == port->bridge.secondary_bus && + PCI_SLOT(devfn) != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Access the real PCIe interface */ + spin_lock_irqsave(&port->conf_lock, flags); + ret = mvebu_pcie_hw_wr_conf(port, bus, devfn, + where, size, val); + spin_unlock_irqrestore(&port->conf_lock, flags); + + return ret; +} + +/* PCI configuration space read function */ +static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata); + struct mvebu_pcie_port *port; + unsigned long flags; + int ret; + + port = mvebu_pcie_find_port(pcie, bus, devfn); + if (!port) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* Access the emulated PCI-to-PCI bridge */ + if (bus->number == 0) + return mvebu_sw_pci_bridge_read(port, where, size, val); + + if (!port->haslink) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * On the secondary bus, we don't want to expose any other + * device than the device physically connected in the PCIe + * slot, visible in slot 0. In slot 1, there's a special + * Marvell device that only makes sense when the Armada is + * used as a PCIe endpoint. + */ + if (bus->number == port->bridge.secondary_bus && + PCI_SLOT(devfn) != 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* Access the real PCIe interface */ + spin_lock_irqsave(&port->conf_lock, flags); + ret = mvebu_pcie_hw_rd_conf(port, bus, devfn, + where, size, val); + spin_unlock_irqrestore(&port->conf_lock, flags); + + return ret; +} + +static struct pci_ops mvebu_pcie_ops = { + .read = mvebu_pcie_rd_conf, + .write = mvebu_pcie_wr_conf, +}; + +static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct mvebu_pcie *pcie = sys_to_pcie(sys); + int i; + + pci_add_resource_offset(&sys->resources, &pcie->realio, sys->io_offset); + pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset); + pci_add_resource(&sys->resources, &pcie->busn); + + for (i = 0; i < pcie->nports; i++) { + struct mvebu_pcie_port *port = &pcie->ports[i]; + mvebu_pcie_setup_hw(port); + } + + return 1; +} + +static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct of_irq oirq; + int ret; + + ret = of_irq_map_pci(dev, &oirq); + if (ret) + return ret; + + return irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); +} + +static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct mvebu_pcie *pcie = sys_to_pcie(sys); + struct pci_bus *bus; + + bus = pci_create_root_bus(&pcie->pdev->dev, sys->busnr, + &mvebu_pcie_ops, sys, &sys->resources); + if (!bus) + return NULL; + + pci_scan_child_bus(bus); + + return bus; +} + +resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, + resource_size_t size, + resource_size_t align) +{ + if (dev->bus->number != 0) + return start; + + /* + * On the PCI-to-PCI bridge side, the I/O windows must have at + * least a 64 KB size and be aligned on their size, and the + * memory windows must have at least a 1 MB size and be + * aligned on their size + */ + if (res->flags & IORESOURCE_IO) + return round_up(start, max((resource_size_t)SZ_64K, size)); + else if (res->flags & IORESOURCE_MEM) + return round_up(start, max((resource_size_t)SZ_1M, size)); + else + return start; +} + +static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie) +{ + struct hw_pci hw; + + memset(&hw, 0, sizeof(hw)); + + hw.nr_controllers = 1; + hw.private_data = (void **)&pcie; + hw.setup = mvebu_pcie_setup; + hw.scan = mvebu_pcie_scan_bus; + hw.map_irq = mvebu_pcie_map_irq; + hw.ops = &mvebu_pcie_ops; + hw.align_resource = mvebu_pcie_align_resource; + + pci_common_init(&hw); +} + +/* + * Looks up the list of register addresses encoded into the reg = + * <...> property for one that matches the given port/lane. Once + * found, maps it. + */ +static void __iomem * __init +mvebu_pcie_map_registers(struct platform_device *pdev, + struct device_node *np, + struct mvebu_pcie_port *port) +{ + struct resource regs; + int ret = 0; + + ret = of_address_to_resource(np, 0, ®s); + if (ret) + return NULL; + + return devm_request_and_ioremap(&pdev->dev, ®s); +} + +static int __init mvebu_pcie_probe(struct platform_device *pdev) +{ + struct mvebu_pcie *pcie; + struct device_node *np = pdev->dev.of_node; + struct of_pci_range range; + struct of_pci_range_parser parser; + struct device_node *child; + int i, ret; + + pcie = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pcie), + GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + pcie->pdev = pdev; + + if (of_pci_range_parser_init(&parser, np)) + return -EINVAL; + + /* Get the I/O and memory ranges from DT */ + for_each_of_pci_range(&parser, &range) { + unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; + if (restype == IORESOURCE_IO) { + of_pci_range_to_resource(&range, np, &pcie->io); + of_pci_range_to_resource(&range, np, &pcie->realio); + pcie->io.name = "I/O"; + pcie->realio.start = max_t(resource_size_t, + PCIBIOS_MIN_IO, + range.pci_addr); + pcie->realio.end = min_t(resource_size_t, + IO_SPACE_LIMIT, + range.pci_addr + range.size); + } + if (restype == IORESOURCE_MEM) { + of_pci_range_to_resource(&range, np, &pcie->mem); + pcie->mem.name = "MEM"; + } + } + + /* Get the bus range */ + ret = of_pci_parse_bus_range(np, &pcie->busn); + if (ret) { + dev_err(&pdev->dev, "failed to parse bus-range property: %d\n", + ret); + return ret; + } + + for_each_child_of_node(pdev->dev.of_node, child) { + if (!of_device_is_available(child)) + continue; + pcie->nports++; + } + + pcie->ports = devm_kzalloc(&pdev->dev, pcie->nports * + sizeof(struct mvebu_pcie_port), + GFP_KERNEL); + if (!pcie->ports) + return -ENOMEM; + + i = 0; + for_each_child_of_node(pdev->dev.of_node, child) { + struct mvebu_pcie_port *port = &pcie->ports[i]; + + if (!of_device_is_available(child)) + continue; + + port->pcie = pcie; + + if (of_property_read_u32(child, "marvell,pcie-port", + &port->port)) { + dev_warn(&pdev->dev, + "ignoring PCIe DT node, missing pcie-port property\n"); + continue; + } + + if (of_property_read_u32(child, "marvell,pcie-lane", + &port->lane)) + port->lane = 0; + + port->name = kasprintf(GFP_KERNEL, "pcie%d.%d", + port->port, port->lane); + + port->devfn = of_pci_get_devfn(child); + if (port->devfn < 0) + continue; + + port->base = mvebu_pcie_map_registers(pdev, child, port); + if (!port->base) { + dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n", + port->port, port->lane); + continue; + } + + mvebu_pcie_set_local_dev_nr(port, 1); + + if (mvebu_pcie_link_up(port)) { + port->haslink = 1; + dev_info(&pdev->dev, "PCIe%d.%d: link up\n", + port->port, port->lane); + } else { + port->haslink = 0; + dev_info(&pdev->dev, "PCIe%d.%d: link down\n", + port->port, port->lane); + } + + port->clk = of_clk_get_by_name(child, NULL); + if (IS_ERR(port->clk)) { + dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n", + port->port, port->lane); + iounmap(port->base); + port->haslink = 0; + continue; + } + + port->dn = child; + + clk_prepare_enable(port->clk); + spin_lock_init(&port->conf_lock); + + mvebu_sw_pci_bridge_init(port); + + i++; + } + + mvebu_pcie_enable(pcie); + + return 0; +} + +static const struct of_device_id mvebu_pcie_of_match_table[] = { + { .compatible = "marvell,armada-xp-pcie", }, + { .compatible = "marvell,armada-370-pcie", }, + { .compatible = "marvell,kirkwood-pcie", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table); + +static struct platform_driver mvebu_pcie_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "mvebu-pcie", + .of_match_table = + of_match_ptr(mvebu_pcie_of_match_table), + }, +}; + +static int __init mvebu_pcie_init(void) +{ + return platform_driver_probe(&mvebu_pcie_driver, + mvebu_pcie_probe); +} + +subsys_initcall(mvebu_pcie_init); + +MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>"); +MODULE_DESCRIPTION("Marvell EBU PCIe driver"); +MODULE_LICENSE("GPLv2"); diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c new file mode 100644 index 00000000000..26bdbda8ff9 --- /dev/null +++ b/drivers/pci/host/pcie-designware.c @@ -0,0 +1,1057 @@ +/* + * PCIe host controller driver for Samsung EXYNOS SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Jingoo Han <jg1.han@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_gpio.h> +#include <linux/of_pci.h> +#include <linux/pci.h> +#include <linux/pci_regs.h> +#include <linux/platform_device.h> +#include <linux/resource.h> +#include <linux/signal.h> +#include <linux/slab.h> +#include <linux/types.h> + +struct pcie_port_info { + u32 cfg0_size; + u32 cfg1_size; + u32 io_size; + u32 mem_size; + phys_addr_t io_bus_addr; + phys_addr_t mem_bus_addr; +}; + +struct pcie_port { + struct device *dev; + u8 controller; + u8 root_bus_nr; + void __iomem *dbi_base; + void __iomem *elbi_base; + void __iomem *phy_base; + void __iomem *purple_base; + u64 cfg0_base; + void __iomem *va_cfg0_base; + u64 cfg1_base; + void __iomem *va_cfg1_base; + u64 io_base; + u64 mem_base; + spinlock_t conf_lock; + struct resource cfg; + struct resource io; + struct resource mem; + struct pcie_port_info config; + struct clk *clk; + struct clk *bus_clk; + int irq; + int reset_gpio; +}; + +/* + * Exynos PCIe IP consists of Synopsys specific part and Exynos + * specific part. Only core block is a Synopsys designware part; + * other parts are Exynos specific. + */ + +/* Synopsis specific PCIE configuration registers */ +#define PCIE_PORT_LINK_CONTROL 0x710 +#define PORT_LINK_MODE_MASK (0x3f << 16) +#define PORT_LINK_MODE_4_LANES (0x7 << 16) + +#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C +#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17) +#define PORT_LOGIC_LINK_WIDTH_MASK (0x1ff << 8) +#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x7 << 8) + +#define PCIE_MSI_ADDR_LO 0x820 +#define PCIE_MSI_ADDR_HI 0x824 +#define PCIE_MSI_INTR0_ENABLE 0x828 +#define PCIE_MSI_INTR0_MASK 0x82C +#define PCIE_MSI_INTR0_STATUS 0x830 + +#define PCIE_ATU_VIEWPORT 0x900 +#define PCIE_ATU_REGION_INBOUND (0x1 << 31) +#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) +#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) +#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) +#define PCIE_ATU_CR1 0x904 +#define PCIE_ATU_TYPE_MEM (0x0 << 0) +#define PCIE_ATU_TYPE_IO (0x2 << 0) +#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) +#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) +#define PCIE_ATU_CR2 0x908 +#define PCIE_ATU_ENABLE (0x1 << 31) +#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) +#define PCIE_ATU_LOWER_BASE 0x90C +#define PCIE_ATU_UPPER_BASE 0x910 +#define PCIE_ATU_LIMIT 0x914 +#define PCIE_ATU_LOWER_TARGET 0x918 +#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) +#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) +#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) +#define PCIE_ATU_UPPER_TARGET 0x91C + +/* Exynos specific PCIE configuration registers */ + +/* PCIe ELBI registers */ +#define PCIE_IRQ_PULSE 0x000 +#define IRQ_INTA_ASSERT (0x1 << 0) +#define IRQ_INTB_ASSERT (0x1 << 2) +#define IRQ_INTC_ASSERT (0x1 << 4) +#define IRQ_INTD_ASSERT (0x1 << 6) +#define PCIE_IRQ_LEVEL 0x004 +#define PCIE_IRQ_SPECIAL 0x008 +#define PCIE_IRQ_EN_PULSE 0x00c +#define PCIE_IRQ_EN_LEVEL 0x010 +#define PCIE_IRQ_EN_SPECIAL 0x014 +#define PCIE_PWR_RESET 0x018 +#define PCIE_CORE_RESET 0x01c +#define PCIE_CORE_RESET_ENABLE (0x1 << 0) +#define PCIE_STICKY_RESET 0x020 +#define PCIE_NONSTICKY_RESET 0x024 +#define PCIE_APP_INIT_RESET 0x028 +#define PCIE_APP_LTSSM_ENABLE 0x02c +#define PCIE_ELBI_RDLH_LINKUP 0x064 +#define PCIE_ELBI_LTSSM_ENABLE 0x1 +#define PCIE_ELBI_SLV_AWMISC 0x11c +#define PCIE_ELBI_SLV_ARMISC 0x120 +#define PCIE_ELBI_SLV_DBI_ENABLE (0x1 << 21) + +/* PCIe Purple registers */ +#define PCIE_PHY_GLOBAL_RESET 0x000 +#define PCIE_PHY_COMMON_RESET 0x004 +#define PCIE_PHY_CMN_REG 0x008 +#define PCIE_PHY_MAC_RESET 0x00c +#define PCIE_PHY_PLL_LOCKED 0x010 +#define PCIE_PHY_TRSVREG_RESET 0x020 +#define PCIE_PHY_TRSV_RESET 0x024 + +/* PCIe PHY registers */ +#define PCIE_PHY_IMPEDANCE 0x004 +#define PCIE_PHY_PLL_DIV_0 0x008 +#define PCIE_PHY_PLL_BIAS 0x00c +#define PCIE_PHY_DCC_FEEDBACK 0x014 +#define PCIE_PHY_PLL_DIV_1 0x05c +#define PCIE_PHY_TRSV0_EMP_LVL 0x084 +#define PCIE_PHY_TRSV0_DRV_LVL 0x088 +#define PCIE_PHY_TRSV0_RXCDR 0x0ac +#define PCIE_PHY_TRSV0_LVCC 0x0dc +#define PCIE_PHY_TRSV1_EMP_LVL 0x144 +#define PCIE_PHY_TRSV1_RXCDR 0x16c +#define PCIE_PHY_TRSV1_LVCC 0x19c +#define PCIE_PHY_TRSV2_EMP_LVL 0x204 +#define PCIE_PHY_TRSV2_RXCDR 0x22c +#define PCIE_PHY_TRSV2_LVCC 0x25c +#define PCIE_PHY_TRSV3_EMP_LVL 0x2c4 +#define PCIE_PHY_TRSV3_RXCDR 0x2ec +#define PCIE_PHY_TRSV3_LVCC 0x31c + +static struct hw_pci exynos_pci; + +static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + +static inline int cfg_read(void *addr, int where, int size, u32 *val) +{ + *val = readl(addr); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + else if (size != 4) + return PCIBIOS_BAD_REGISTER_NUMBER; + + return PCIBIOS_SUCCESSFUL; +} + +static inline int cfg_write(void *addr, int where, int size, u32 val) +{ + if (size == 4) + writel(val, addr); + else if (size == 2) + writew(val, addr + (where & 2)); + else if (size == 1) + writeb(val, addr + (where & 3)); + else + return PCIBIOS_BAD_REGISTER_NUMBER; + + return PCIBIOS_SUCCESSFUL; +} + +static void exynos_pcie_sideband_dbi_w_mode(struct pcie_port *pp, bool on) +{ + u32 val; + + if (on) { + val = readl(pp->elbi_base + PCIE_ELBI_SLV_AWMISC); + val |= PCIE_ELBI_SLV_DBI_ENABLE; + writel(val, pp->elbi_base + PCIE_ELBI_SLV_AWMISC); + } else { + val = readl(pp->elbi_base + PCIE_ELBI_SLV_AWMISC); + val &= ~PCIE_ELBI_SLV_DBI_ENABLE; + writel(val, pp->elbi_base + PCIE_ELBI_SLV_AWMISC); + } +} + +static void exynos_pcie_sideband_dbi_r_mode(struct pcie_port *pp, bool on) +{ + u32 val; + + if (on) { + val = readl(pp->elbi_base + PCIE_ELBI_SLV_ARMISC); + val |= PCIE_ELBI_SLV_DBI_ENABLE; + writel(val, pp->elbi_base + PCIE_ELBI_SLV_ARMISC); + } else { + val = readl(pp->elbi_base + PCIE_ELBI_SLV_ARMISC); + val &= ~PCIE_ELBI_SLV_DBI_ENABLE; + writel(val, pp->elbi_base + PCIE_ELBI_SLV_ARMISC); + } +} + +static inline void readl_rc(struct pcie_port *pp, void *dbi_base, u32 *val) +{ + exynos_pcie_sideband_dbi_r_mode(pp, true); + *val = readl(dbi_base); + exynos_pcie_sideband_dbi_r_mode(pp, false); + return; +} + +static inline void writel_rc(struct pcie_port *pp, u32 val, void *dbi_base) +{ + exynos_pcie_sideband_dbi_w_mode(pp, true); + writel(val, dbi_base); + exynos_pcie_sideband_dbi_w_mode(pp, false); + return; +} + +static int exynos_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, + u32 *val) +{ + int ret; + + exynos_pcie_sideband_dbi_r_mode(pp, true); + ret = cfg_read(pp->dbi_base + (where & ~0x3), where, size, val); + exynos_pcie_sideband_dbi_r_mode(pp, false); + return ret; +} + +static int exynos_pcie_wr_own_conf(struct pcie_port *pp, int where, int size, + u32 val) +{ + int ret; + + exynos_pcie_sideband_dbi_w_mode(pp, true); + ret = cfg_write(pp->dbi_base + (where & ~0x3), where, size, val); + exynos_pcie_sideband_dbi_w_mode(pp, false); + return ret; +} + +static void exynos_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) +{ + u32 val; + void __iomem *dbi_base = pp->dbi_base; + + /* Program viewport 0 : OUTBOUND : CFG0 */ + val = PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0; + writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT); + writel_rc(pp, pp->cfg0_base, dbi_base + PCIE_ATU_LOWER_BASE); + writel_rc(pp, (pp->cfg0_base >> 32), dbi_base + PCIE_ATU_UPPER_BASE); + writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1, + dbi_base + PCIE_ATU_LIMIT); + writel_rc(pp, busdev, dbi_base + PCIE_ATU_LOWER_TARGET); + writel_rc(pp, 0, dbi_base + PCIE_ATU_UPPER_TARGET); + writel_rc(pp, PCIE_ATU_TYPE_CFG0, dbi_base + PCIE_ATU_CR1); + val = PCIE_ATU_ENABLE; + writel_rc(pp, val, dbi_base + PCIE_ATU_CR2); +} + +static void exynos_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) +{ + u32 val; + void __iomem *dbi_base = pp->dbi_base; + + /* Program viewport 1 : OUTBOUND : CFG1 */ + val = PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1; + writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT); + writel_rc(pp, PCIE_ATU_TYPE_CFG1, dbi_base + PCIE_ATU_CR1); + val = PCIE_ATU_ENABLE; + writel_rc(pp, val, dbi_base + PCIE_ATU_CR2); + writel_rc(pp, pp->cfg1_base, dbi_base + PCIE_ATU_LOWER_BASE); + writel_rc(pp, (pp->cfg1_base >> 32), dbi_base + PCIE_ATU_UPPER_BASE); + writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1, + dbi_base + PCIE_ATU_LIMIT); + writel_rc(pp, busdev, dbi_base + PCIE_ATU_LOWER_TARGET); + writel_rc(pp, 0, dbi_base + PCIE_ATU_UPPER_TARGET); +} + +static void exynos_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) +{ + u32 val; + void __iomem *dbi_base = pp->dbi_base; + + /* Program viewport 0 : OUTBOUND : MEM */ + val = PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0; + writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT); + writel_rc(pp, PCIE_ATU_TYPE_MEM, dbi_base + PCIE_ATU_CR1); + val = PCIE_ATU_ENABLE; + writel_rc(pp, val, dbi_base + PCIE_ATU_CR2); + writel_rc(pp, pp->mem_base, dbi_base + PCIE_ATU_LOWER_BASE); + writel_rc(pp, (pp->mem_base >> 32), dbi_base + PCIE_ATU_UPPER_BASE); + writel_rc(pp, pp->mem_base + pp->config.mem_size - 1, + dbi_base + PCIE_ATU_LIMIT); + writel_rc(pp, pp->config.mem_bus_addr, + dbi_base + PCIE_ATU_LOWER_TARGET); + writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr), + dbi_base + PCIE_ATU_UPPER_TARGET); +} + +static void exynos_pcie_prog_viewport_io_outbound(struct pcie_port *pp) +{ + u32 val; + void __iomem *dbi_base = pp->dbi_base; + + /* Program viewport 1 : OUTBOUND : IO */ + val = PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1; + writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT); + writel_rc(pp, PCIE_ATU_TYPE_IO, dbi_base + PCIE_ATU_CR1); + val = PCIE_ATU_ENABLE; + writel_rc(pp, val, dbi_base + PCIE_ATU_CR2); + writel_rc(pp, pp->io_base, dbi_base + PCIE_ATU_LOWER_BASE); + writel_rc(pp, (pp->io_base >> 32), dbi_base + PCIE_ATU_UPPER_BASE); + writel_rc(pp, pp->io_base + pp->config.io_size - 1, + dbi_base + PCIE_ATU_LIMIT); + writel_rc(pp, pp->config.io_bus_addr, + dbi_base + PCIE_ATU_LOWER_TARGET); + writel_rc(pp, upper_32_bits(pp->config.io_bus_addr), + dbi_base + PCIE_ATU_UPPER_TARGET); +} + +static int exynos_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + int ret = PCIBIOS_SUCCESSFUL; + u32 address, busdev; + + busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) | + PCIE_ATU_FUNC(PCI_FUNC(devfn)); + address = where & ~0x3; + + if (bus->parent->number == pp->root_bus_nr) { + exynos_pcie_prog_viewport_cfg0(pp, busdev); + ret = cfg_read(pp->va_cfg0_base + address, where, size, val); + exynos_pcie_prog_viewport_mem_outbound(pp); + } else { + exynos_pcie_prog_viewport_cfg1(pp, busdev); + ret = cfg_read(pp->va_cfg1_base + address, where, size, val); + exynos_pcie_prog_viewport_io_outbound(pp); + } + + return ret; +} + +static int exynos_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, + u32 devfn, int where, int size, u32 val) +{ + int ret = PCIBIOS_SUCCESSFUL; + u32 address, busdev; + + busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) | + PCIE_ATU_FUNC(PCI_FUNC(devfn)); + address = where & ~0x3; + + if (bus->parent->number == pp->root_bus_nr) { + exynos_pcie_prog_viewport_cfg0(pp, busdev); + ret = cfg_write(pp->va_cfg0_base + address, where, size, val); + exynos_pcie_prog_viewport_mem_outbound(pp); + } else { + exynos_pcie_prog_viewport_cfg1(pp, busdev); + ret = cfg_write(pp->va_cfg1_base + address, where, size, val); + exynos_pcie_prog_viewport_io_outbound(pp); + } + + return ret; +} + +static unsigned long global_io_offset; + +static int exynos_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct pcie_port *pp; + + pp = sys_to_pcie(sys); + + if (!pp) + return 0; + + if (global_io_offset < SZ_1M && pp->config.io_size > 0) { + sys->io_offset = global_io_offset - pp->config.io_bus_addr; + pci_ioremap_io(sys->io_offset, pp->io.start); + global_io_offset += SZ_64K; + pci_add_resource_offset(&sys->resources, &pp->io, + sys->io_offset); + } + + sys->mem_offset = pp->mem.start - pp->config.mem_bus_addr; + pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset); + + return 1; +} + +static int exynos_pcie_link_up(struct pcie_port *pp) +{ + u32 val = readl(pp->elbi_base + PCIE_ELBI_RDLH_LINKUP); + + if (val == PCIE_ELBI_LTSSM_ENABLE) + return 1; + + return 0; +} + +static int exynos_pcie_valid_config(struct pcie_port *pp, + struct pci_bus *bus, int dev) +{ + /* If there is no link, then there is no device */ + if (bus->number != pp->root_bus_nr) { + if (!exynos_pcie_link_up(pp)) + return 0; + } + + /* access only one slot on each root port */ + if (bus->number == pp->root_bus_nr && dev > 0) + return 0; + + /* + * do not read more than one device on the bus directly attached + * to RC's (Virtual Bridge's) DS side. + */ + if (bus->primary == pp->root_bus_nr && dev > 0) + return 0; + + return 1; +} + +static int exynos_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + struct pcie_port *pp = sys_to_pcie(bus->sysdata); + unsigned long flags; + int ret; + + if (!pp) { + BUG(); + return -EINVAL; + } + + if (exynos_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + spin_lock_irqsave(&pp->conf_lock, flags); + if (bus->number != pp->root_bus_nr) + ret = exynos_pcie_rd_other_conf(pp, bus, devfn, + where, size, val); + else + ret = exynos_pcie_rd_own_conf(pp, where, size, val); + spin_unlock_irqrestore(&pp->conf_lock, flags); + + return ret; +} + +static int exynos_pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + struct pcie_port *pp = sys_to_pcie(bus->sysdata); + unsigned long flags; + int ret; + + if (!pp) { + BUG(); + return -EINVAL; + } + + if (exynos_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&pp->conf_lock, flags); + if (bus->number != pp->root_bus_nr) + ret = exynos_pcie_wr_other_conf(pp, bus, devfn, + where, size, val); + else + ret = exynos_pcie_wr_own_conf(pp, where, size, val); + spin_unlock_irqrestore(&pp->conf_lock, flags); + + return ret; +} + +static struct pci_ops exynos_pcie_ops = { + .read = exynos_pcie_rd_conf, + .write = exynos_pcie_wr_conf, +}; + +static struct pci_bus *exynos_pcie_scan_bus(int nr, + struct pci_sys_data *sys) +{ + struct pci_bus *bus; + struct pcie_port *pp = sys_to_pcie(sys); + + if (pp) { + pp->root_bus_nr = sys->busnr; + bus = pci_scan_root_bus(NULL, sys->busnr, &exynos_pcie_ops, + sys, &sys->resources); + } else { + bus = NULL; + BUG(); + } + + return bus; +} + +static int exynos_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata); + + return pp->irq; +} + +static struct hw_pci exynos_pci = { + .setup = exynos_pcie_setup, + .scan = exynos_pcie_scan_bus, + .map_irq = exynos_pcie_map_irq, +}; + +static void exynos_pcie_setup_rc(struct pcie_port *pp) +{ + struct pcie_port_info *config = &pp->config; + void __iomem *dbi_base = pp->dbi_base; + u32 val; + u32 membase; + u32 memlimit; + + /* set the number of lines as 4 */ + readl_rc(pp, dbi_base + PCIE_PORT_LINK_CONTROL, &val); + val &= ~PORT_LINK_MODE_MASK; + val |= PORT_LINK_MODE_4_LANES; + writel_rc(pp, val, dbi_base + PCIE_PORT_LINK_CONTROL); + + /* set link width speed control register */ + readl_rc(pp, dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL, &val); + val &= ~PORT_LOGIC_LINK_WIDTH_MASK; + val |= PORT_LOGIC_LINK_WIDTH_4_LANES; + writel_rc(pp, val, dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL); + + /* setup RC BARs */ + writel_rc(pp, 0x00000004, dbi_base + PCI_BASE_ADDRESS_0); + writel_rc(pp, 0x00000004, dbi_base + PCI_BASE_ADDRESS_1); + + /* setup interrupt pins */ + readl_rc(pp, dbi_base + PCI_INTERRUPT_LINE, &val); + val &= 0xffff00ff; + val |= 0x00000100; + writel_rc(pp, val, dbi_base + PCI_INTERRUPT_LINE); + + /* setup bus numbers */ + readl_rc(pp, dbi_base + PCI_PRIMARY_BUS, &val); + val &= 0xff000000; + val |= 0x00010100; + writel_rc(pp, val, dbi_base + PCI_PRIMARY_BUS); + + /* setup memory base, memory limit */ + membase = ((u32)pp->mem_base & 0xfff00000) >> 16; + memlimit = (config->mem_size + (u32)pp->mem_base) & 0xfff00000; + val = memlimit | membase; + writel_rc(pp, val, dbi_base + PCI_MEMORY_BASE); + + /* setup command register */ + readl_rc(pp, dbi_base + PCI_COMMAND, &val); + val &= 0xffff0000; + val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER | PCI_COMMAND_SERR; + writel_rc(pp, val, dbi_base + PCI_COMMAND); +} + +static void exynos_pcie_assert_core_reset(struct pcie_port *pp) +{ + u32 val; + void __iomem *elbi_base = pp->elbi_base; + + val = readl(elbi_base + PCIE_CORE_RESET); + val &= ~PCIE_CORE_RESET_ENABLE; + writel(val, elbi_base + PCIE_CORE_RESET); + writel(0, elbi_base + PCIE_PWR_RESET); + writel(0, elbi_base + PCIE_STICKY_RESET); + writel(0, elbi_base + PCIE_NONSTICKY_RESET); +} + +static void exynos_pcie_deassert_core_reset(struct pcie_port *pp) +{ + u32 val; + void __iomem *elbi_base = pp->elbi_base; + void __iomem *purple_base = pp->purple_base; + + val = readl(elbi_base + PCIE_CORE_RESET); + val |= PCIE_CORE_RESET_ENABLE; + writel(val, elbi_base + PCIE_CORE_RESET); + writel(1, elbi_base + PCIE_STICKY_RESET); + writel(1, elbi_base + PCIE_NONSTICKY_RESET); + writel(1, elbi_base + PCIE_APP_INIT_RESET); + writel(0, elbi_base + PCIE_APP_INIT_RESET); + writel(1, purple_base + PCIE_PHY_MAC_RESET); +} + +static void exynos_pcie_assert_phy_reset(struct pcie_port *pp) +{ + void __iomem *purple_base = pp->purple_base; + + writel(0, purple_base + PCIE_PHY_MAC_RESET); + writel(1, purple_base + PCIE_PHY_GLOBAL_RESET); +} + +static void exynos_pcie_deassert_phy_reset(struct pcie_port *pp) +{ + void __iomem *elbi_base = pp->elbi_base; + void __iomem *purple_base = pp->purple_base; + + writel(0, purple_base + PCIE_PHY_GLOBAL_RESET); + writel(1, elbi_base + PCIE_PWR_RESET); + writel(0, purple_base + PCIE_PHY_COMMON_RESET); + writel(0, purple_base + PCIE_PHY_CMN_REG); + writel(0, purple_base + PCIE_PHY_TRSVREG_RESET); + writel(0, purple_base + PCIE_PHY_TRSV_RESET); +} + +static void exynos_pcie_init_phy(struct pcie_port *pp) +{ + void __iomem *phy_base = pp->phy_base; + + /* DCC feedback control off */ + writel(0x29, phy_base + PCIE_PHY_DCC_FEEDBACK); + + /* set TX/RX impedance */ + writel(0xd5, phy_base + PCIE_PHY_IMPEDANCE); + + /* set 50Mhz PHY clock */ + writel(0x14, phy_base + PCIE_PHY_PLL_DIV_0); + writel(0x12, phy_base + PCIE_PHY_PLL_DIV_1); + + /* set TX Differential output for lane 0 */ + writel(0x7f, phy_base + PCIE_PHY_TRSV0_DRV_LVL); + + /* set TX Pre-emphasis Level Control for lane 0 to minimum */ + writel(0x0, phy_base + PCIE_PHY_TRSV0_EMP_LVL); + + /* set RX clock and data recovery bandwidth */ + writel(0xe7, phy_base + PCIE_PHY_PLL_BIAS); + writel(0x82, phy_base + PCIE_PHY_TRSV0_RXCDR); + writel(0x82, phy_base + PCIE_PHY_TRSV1_RXCDR); + writel(0x82, phy_base + PCIE_PHY_TRSV2_RXCDR); + writel(0x82, phy_base + PCIE_PHY_TRSV3_RXCDR); + + /* change TX Pre-emphasis Level Control for lanes */ + writel(0x39, phy_base + PCIE_PHY_TRSV0_EMP_LVL); + writel(0x39, phy_base + PCIE_PHY_TRSV1_EMP_LVL); + writel(0x39, phy_base + PCIE_PHY_TRSV2_EMP_LVL); + writel(0x39, phy_base + PCIE_PHY_TRSV3_EMP_LVL); + + /* set LVCC */ + writel(0x20, phy_base + PCIE_PHY_TRSV0_LVCC); + writel(0xa0, phy_base + PCIE_PHY_TRSV1_LVCC); + writel(0xa0, phy_base + PCIE_PHY_TRSV2_LVCC); + writel(0xa0, phy_base + PCIE_PHY_TRSV3_LVCC); +} + +static void exynos_pcie_assert_reset(struct pcie_port *pp) +{ + if (pp->reset_gpio >= 0) + devm_gpio_request_one(pp->dev, pp->reset_gpio, + GPIOF_OUT_INIT_HIGH, "RESET"); + return; +} + +static int exynos_pcie_establish_link(struct pcie_port *pp) +{ + u32 val; + int count = 0; + void __iomem *elbi_base = pp->elbi_base; + void __iomem *purple_base = pp->purple_base; + void __iomem *phy_base = pp->phy_base; + + if (exynos_pcie_link_up(pp)) { + dev_err(pp->dev, "Link already up\n"); + return 0; + } + + /* assert reset signals */ + exynos_pcie_assert_core_reset(pp); + exynos_pcie_assert_phy_reset(pp); + + /* de-assert phy reset */ + exynos_pcie_deassert_phy_reset(pp); + + /* initialize phy */ + exynos_pcie_init_phy(pp); + + /* pulse for common reset */ + writel(1, purple_base + PCIE_PHY_COMMON_RESET); + udelay(500); + writel(0, purple_base + PCIE_PHY_COMMON_RESET); + + /* de-assert core reset */ + exynos_pcie_deassert_core_reset(pp); + + /* setup root complex */ + exynos_pcie_setup_rc(pp); + + /* assert reset signal */ + exynos_pcie_assert_reset(pp); + + /* assert LTSSM enable */ + writel(PCIE_ELBI_LTSSM_ENABLE, elbi_base + PCIE_APP_LTSSM_ENABLE); + + /* check if the link is up or not */ + while (!exynos_pcie_link_up(pp)) { + mdelay(100); + count++; + if (count == 10) { + while (readl(phy_base + PCIE_PHY_PLL_LOCKED) == 0) { + val = readl(purple_base + PCIE_PHY_PLL_LOCKED); + dev_info(pp->dev, "PLL Locked: 0x%x\n", val); + } + dev_err(pp->dev, "PCIe Link Fail\n"); + return -EINVAL; + } + } + + dev_info(pp->dev, "Link up\n"); + + return 0; +} + +static void exynos_pcie_clear_irq_pulse(struct pcie_port *pp) +{ + u32 val; + void __iomem *elbi_base = pp->elbi_base; + + val = readl(elbi_base + PCIE_IRQ_PULSE); + writel(val, elbi_base + PCIE_IRQ_PULSE); + return; +} + +static void exynos_pcie_enable_irq_pulse(struct pcie_port *pp) +{ + u32 val; + void __iomem *elbi_base = pp->elbi_base; + + /* enable INTX interrupt */ + val = IRQ_INTA_ASSERT | IRQ_INTB_ASSERT | + IRQ_INTC_ASSERT | IRQ_INTD_ASSERT, + writel(val, elbi_base + PCIE_IRQ_EN_PULSE); + return; +} + +static irqreturn_t exynos_pcie_irq_handler(int irq, void *arg) +{ + struct pcie_port *pp = arg; + + exynos_pcie_clear_irq_pulse(pp); + return IRQ_HANDLED; +} + +static void exynos_pcie_enable_interrupts(struct pcie_port *pp) +{ + exynos_pcie_enable_irq_pulse(pp); + return; +} + +static void exynos_pcie_host_init(struct pcie_port *pp) +{ + struct pcie_port_info *config = &pp->config; + u32 val; + + /* Keep first 64K for IO */ + pp->cfg0_base = pp->cfg.start; + pp->cfg1_base = pp->cfg.start + config->cfg0_size; + pp->io_base = pp->io.start; + pp->mem_base = pp->mem.start; + + /* enable link */ + exynos_pcie_establish_link(pp); + + exynos_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); + + /* program correct class for RC */ + exynos_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); + + exynos_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val); + val |= PORT_LOGIC_SPEED_CHANGE; + exynos_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); + + exynos_pcie_enable_interrupts(pp); +} + +static int add_pcie_port(struct pcie_port *pp, struct platform_device *pdev) +{ + struct resource *elbi_base; + struct resource *phy_base; + struct resource *purple_base; + int ret; + + elbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!elbi_base) { + dev_err(&pdev->dev, "couldn't get elbi base resource\n"); + return -EINVAL; + } + pp->elbi_base = devm_ioremap_resource(&pdev->dev, elbi_base); + if (IS_ERR(pp->elbi_base)) + return PTR_ERR(pp->elbi_base); + + phy_base = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!phy_base) { + dev_err(&pdev->dev, "couldn't get phy base resource\n"); + return -EINVAL; + } + pp->phy_base = devm_ioremap_resource(&pdev->dev, phy_base); + if (IS_ERR(pp->phy_base)) + return PTR_ERR(pp->phy_base); + + purple_base = platform_get_resource(pdev, IORESOURCE_MEM, 2); + if (!purple_base) { + dev_err(&pdev->dev, "couldn't get purple base resource\n"); + return -EINVAL; + } + pp->purple_base = devm_ioremap_resource(&pdev->dev, purple_base); + if (IS_ERR(pp->purple_base)) + return PTR_ERR(pp->purple_base); + + pp->irq = platform_get_irq(pdev, 1); + if (!pp->irq) { + dev_err(&pdev->dev, "failed to get irq\n"); + return -ENODEV; + } + ret = devm_request_irq(&pdev->dev, pp->irq, exynos_pcie_irq_handler, + IRQF_SHARED, "exynos-pcie", pp); + if (ret) { + dev_err(&pdev->dev, "failed to request irq\n"); + return ret; + } + + pp->dbi_base = devm_ioremap(&pdev->dev, pp->cfg.start, + resource_size(&pp->cfg)); + if (!pp->dbi_base) { + dev_err(&pdev->dev, "error with ioremap\n"); + return -ENOMEM; + } + + pp->root_bus_nr = -1; + + spin_lock_init(&pp->conf_lock); + exynos_pcie_host_init(pp); + pp->va_cfg0_base = devm_ioremap(&pdev->dev, pp->cfg0_base, + pp->config.cfg0_size); + if (!pp->va_cfg0_base) { + dev_err(pp->dev, "error with ioremap in function\n"); + return -ENOMEM; + } + pp->va_cfg1_base = devm_ioremap(&pdev->dev, pp->cfg1_base, + pp->config.cfg1_size); + if (!pp->va_cfg1_base) { + dev_err(pp->dev, "error with ioremap\n"); + return -ENOMEM; + } + + return 0; +} + +static int __init exynos_pcie_probe(struct platform_device *pdev) +{ + struct pcie_port *pp; + struct device_node *np = pdev->dev.of_node; + struct of_pci_range range; + struct of_pci_range_parser parser; + int ret; + + pp = devm_kzalloc(&pdev->dev, sizeof(*pp), GFP_KERNEL); + if (!pp) { + dev_err(&pdev->dev, "no memory for pcie port\n"); + return -ENOMEM; + } + + pp->dev = &pdev->dev; + + if (of_pci_range_parser_init(&parser, np)) { + dev_err(&pdev->dev, "missing ranges property\n"); + return -EINVAL; + } + + /* Get the I/O and memory ranges from DT */ + for_each_of_pci_range(&parser, &range) { + unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; + if (restype == IORESOURCE_IO) { + of_pci_range_to_resource(&range, np, &pp->io); + pp->io.name = "I/O"; + pp->io.start = max_t(resource_size_t, + PCIBIOS_MIN_IO, + range.pci_addr + global_io_offset); + pp->io.end = min_t(resource_size_t, + IO_SPACE_LIMIT, + range.pci_addr + range.size + + global_io_offset); + pp->config.io_size = resource_size(&pp->io); + pp->config.io_bus_addr = range.pci_addr; + } + if (restype == IORESOURCE_MEM) { + of_pci_range_to_resource(&range, np, &pp->mem); + pp->mem.name = "MEM"; + pp->config.mem_size = resource_size(&pp->mem); + pp->config.mem_bus_addr = range.pci_addr; + } + if (restype == 0) { + of_pci_range_to_resource(&range, np, &pp->cfg); + pp->config.cfg0_size = resource_size(&pp->cfg)/2; + pp->config.cfg1_size = resource_size(&pp->cfg)/2; + } + } + + pp->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0); + + pp->clk = devm_clk_get(&pdev->dev, "pcie"); + if (IS_ERR(pp->clk)) { + dev_err(&pdev->dev, "Failed to get pcie rc clock\n"); + return PTR_ERR(pp->clk); + } + ret = clk_prepare_enable(pp->clk); + if (ret) + return ret; + + pp->bus_clk = devm_clk_get(&pdev->dev, "pcie_bus"); + if (IS_ERR(pp->bus_clk)) { + dev_err(&pdev->dev, "Failed to get pcie bus clock\n"); + ret = PTR_ERR(pp->bus_clk); + goto fail_clk; + } + ret = clk_prepare_enable(pp->bus_clk); + if (ret) + goto fail_clk; + + ret = add_pcie_port(pp, pdev); + if (ret < 0) + goto fail_bus_clk; + + pp->controller = exynos_pci.nr_controllers; + exynos_pci.nr_controllers = 1; + exynos_pci.private_data = (void **)&pp; + + pci_common_init(&exynos_pci); + pci_assign_unassigned_resources(); +#ifdef CONFIG_PCI_DOMAINS + exynos_pci.domain++; +#endif + + platform_set_drvdata(pdev, pp); + return 0; + +fail_bus_clk: + clk_disable_unprepare(pp->bus_clk); +fail_clk: + clk_disable_unprepare(pp->clk); + return ret; +} + +static int __exit exynos_pcie_remove(struct platform_device *pdev) +{ + struct pcie_port *pp = platform_get_drvdata(pdev); + + clk_disable_unprepare(pp->bus_clk); + clk_disable_unprepare(pp->clk); + + return 0; +} + +static const struct of_device_id exynos_pcie_of_match[] = { + { .compatible = "samsung,exynos5440-pcie", }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos_pcie_of_match); + +static struct platform_driver exynos_pcie_driver = { + .remove = __exit_p(exynos_pcie_remove), + .driver = { + .name = "exynos-pcie", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(exynos_pcie_of_match), + }, +}; + +static int exynos_pcie_abort(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + unsigned long instr = *(unsigned long *)pc; + + WARN_ONCE(1, "pcie abort\n"); + + /* + * If the instruction being executed was a read, + * make it look like it read all-ones. + */ + if ((instr & 0x0c100000) == 0x04100000) { + int reg = (instr >> 12) & 15; + unsigned long val; + + if (instr & 0x00400000) + val = 255; + else + val = -1; + + regs->uregs[reg] = val; + regs->ARM_pc += 4; + return 0; + } + + if ((instr & 0x0e100090) == 0x00100090) { + int reg = (instr >> 12) & 15; + + regs->uregs[reg] = -1; + regs->ARM_pc += 4; + return 0; + } + + return 1; +} + +/* Exynos PCIe driver does not allow module unload */ + +static int __init pcie_init(void) +{ + hook_fault_code(16 + 6, exynos_pcie_abort, SIGBUS, 0, + "imprecise external abort"); + + platform_driver_probe(&exynos_pcie_driver, exynos_pcie_probe); + + return 0; +} +subsys_initcall(pcie_init); + +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); +MODULE_DESCRIPTION("Samsung PCIe host controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 8f669243814..a1c6dd32e14 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -207,12 +207,13 @@ config PINCTRL_SAMSUNG select PINCONF config PINCTRL_EXYNOS - bool "Pinctrl driver data for Samsung EXYNOS SoCs" - depends on OF && GPIOLIB + bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440" + depends on OF && GPIOLIB && ARCH_EXYNOS select PINCTRL_SAMSUNG config PINCTRL_EXYNOS5440 bool "Samsung EXYNOS5440 SoC pinctrl driver" + depends on SOC_EXYNOS5440 select PINMUX select PINCONF diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index d6b41747d68..eeff7f7fc92 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -22,7 +22,6 @@ #include <linux/slab.h> #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> -#include <linux/platform_data/pinctrl-coh901.h> #include "pinctrl-coh901.h" #define U300_GPIO_PORT_STRIDE (0x30) @@ -58,8 +57,9 @@ #define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) /* 8 bits per port, no version has more than 7 ports */ +#define U300_GPIO_NUM_PORTS 7 #define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7) +#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS) struct u300_gpio { struct gpio_chip chip; @@ -111,9 +111,6 @@ struct u300_gpio_confdata { int outval; }; -/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */ -#define BS335_GPIO_NUM_PORTS 7 - #define U300_FLOATING_INPUT { \ .bias_mode = PIN_CONFIG_BIAS_HIGH_IMPEDANCE, \ .output = false, \ @@ -136,7 +133,7 @@ struct u300_gpio_confdata { /* Initial configuration */ static const struct __initconst u300_gpio_confdata -bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { +bs335_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { /* Port 0, pins 0-7 */ { U300_FLOATING_INPUT, @@ -630,13 +627,12 @@ static void __init u300_gpio_init_pin(struct u300_gpio *gpio, } } -static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio, - struct u300_gpio_platform *plat) +static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio) { int i, j; /* Write default config and values to all pins */ - for (i = 0; i < plat->ports; i++) { + for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { for (j = 0; j < 8; j++) { const struct u300_gpio_confdata *conf; int offset = (i*8) + j; @@ -693,7 +689,6 @@ static struct coh901_pinpair coh901_pintable[] = { static int __init u300_gpio_probe(struct platform_device *pdev) { - struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev); struct u300_gpio *gpio; struct resource *memres; int err = 0; @@ -707,9 +702,9 @@ static int __init u300_gpio_probe(struct platform_device *pdev) return -ENOMEM; gpio->chip = u300_gpio_chip; - gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT; + gpio->chip.ngpio = U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT; gpio->chip.dev = &pdev->dev; - gpio->chip.base = plat->gpio_base; + gpio->chip.base = 0; gpio->dev = &pdev->dev; memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -750,11 +745,11 @@ static int __init u300_gpio_probe(struct platform_device *pdev) ((val & 0x0000FE00) >> 9) * 8); writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, gpio->base + U300_GPIO_CR); - u300_gpio_init_coh901571(gpio, plat); + u300_gpio_init_coh901571(gpio); /* Add each port with its IRQ separately */ INIT_LIST_HEAD(&gpio->port_list); - for (portno = 0 ; portno < plat->ports; portno++) { + for (portno = 0 ; portno < U300_GPIO_NUM_PORTS; portno++) { struct u300_gpio_port *port = kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL); @@ -768,8 +763,7 @@ static int __init u300_gpio_probe(struct platform_device *pdev) port->number = portno; port->gpio = gpio; - port->irq = platform_get_irq_byname(pdev, - port->name); + port->irq = platform_get_irq(pdev, portno); dev_dbg(gpio->dev, "register IRQ %d for port %s\n", port->irq, port->name); @@ -806,6 +800,9 @@ static int __init u300_gpio_probe(struct platform_device *pdev) } dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno); +#ifdef CONFIG_OF_GPIO + gpio->chip.of_node = pdev->dev.of_node; +#endif err = gpiochip_add(&gpio->chip); if (err) { dev_err(gpio->dev, "unable to add gpiochip: %d\n", err); @@ -860,9 +857,15 @@ static int __exit u300_gpio_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id u300_gpio_match[] = { + { .compatible = "stericsson,gpio-coh901" }, + {}, +}; + static struct platform_driver u300_gpio_driver = { .driver = { .name = "u300-gpio", + .of_match_table = u300_gpio_match, }, .remove = __exit_p(u300_gpio_remove), }; diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c index 6a3a7503e6a..06bfa09bb15 100644 --- a/drivers/pinctrl/pinctrl-u300.c +++ b/drivers/pinctrl/pinctrl-u300.c @@ -1105,10 +1105,17 @@ static int u300_pmx_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id u300_pinctrl_match[] = { + { .compatible = "stericsson,pinctrl-u300" }, + {}, +}; + + static struct platform_driver u300_pmx_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = u300_pinctrl_match, }, .probe = u300_pmx_probe, .remove = u300_pmx_remove, diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig index f8a2ae413c7..636a882b406 100644 --- a/drivers/pinctrl/sh-pfc/Kconfig +++ b/drivers/pinctrl/sh-pfc/Kconfig @@ -5,8 +5,6 @@ if ARCH_SHMOBILE || SUPERH config PINCTRL_SH_PFC - # XXX move off the gpio dependency - depends on GPIOLIB select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB select PINMUX select PINCONF @@ -32,11 +30,21 @@ config PINCTRL_PFC_R8A7740 depends on ARCH_R8A7740 select PINCTRL_SH_PFC +config PINCTRL_PFC_R8A7778 + def_bool y + depends on ARCH_R8A7778 + select PINCTRL_SH_PFC + config PINCTRL_PFC_R8A7779 def_bool y depends on ARCH_R8A7779 select PINCTRL_SH_PFC +config PINCTRL_PFC_R8A7790 + def_bool y + depends on ARCH_R8A7790 + select PINCTRL_SH_PFC + config PINCTRL_PFC_SH7203 def_bool y depends on CPU_SUBTYPE_SH7203 @@ -64,6 +72,7 @@ config PINCTRL_PFC_SH73A0 def_bool y depends on ARCH_SH73A0 select PINCTRL_SH_PFC + select REGULATOR config PINCTRL_PFC_SH7720 def_bool y diff --git a/drivers/pinctrl/sh-pfc/Makefile b/drivers/pinctrl/sh-pfc/Makefile index 211cd8e98a8..5e0c222c12d 100644 --- a/drivers/pinctrl/sh-pfc/Makefile +++ b/drivers/pinctrl/sh-pfc/Makefile @@ -5,7 +5,9 @@ endif obj-$(CONFIG_PINCTRL_SH_PFC) += sh-pfc.o obj-$(CONFIG_PINCTRL_PFC_R8A73A4) += pfc-r8a73a4.o obj-$(CONFIG_PINCTRL_PFC_R8A7740) += pfc-r8a7740.o +obj-$(CONFIG_PINCTRL_PFC_R8A7778) += pfc-r8a7778.o obj-$(CONFIG_PINCTRL_PFC_R8A7779) += pfc-r8a7779.o +obj-$(CONFIG_PINCTRL_PFC_R8A7790) += pfc-r8a7790.o obj-$(CONFIG_PINCTRL_PFC_SH7203) += pfc-sh7203.o obj-$(CONFIG_PINCTRL_PFC_SH7264) += pfc-sh7264.o obj-$(CONFIG_PINCTRL_PFC_SH7269) += pfc-sh7269.o diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c index b551336924a..3b2fd43ff29 100644 --- a/drivers/pinctrl/sh-pfc/core.c +++ b/drivers/pinctrl/sh-pfc/core.c @@ -372,6 +372,12 @@ static int sh_pfc_probe(struct platform_device *pdev) spin_lock_init(&pfc->lock); + if (info->ops && info->ops->init) { + ret = info->ops->init(pfc); + if (ret < 0) + return ret; + } + pinctrl_provide_dummies(); /* @@ -379,7 +385,7 @@ static int sh_pfc_probe(struct platform_device *pdev) */ ret = sh_pfc_register_pinctrl(pfc); if (unlikely(ret != 0)) - return ret; + goto error; #ifdef CONFIG_GPIO_SH_PFC /* @@ -401,6 +407,11 @@ static int sh_pfc_probe(struct platform_device *pdev) dev_info(pfc->dev, "%s support registered\n", info->name); return 0; + +error: + if (info->ops && info->ops->exit) + info->ops->exit(pfc); + return ret; } static int sh_pfc_remove(struct platform_device *pdev) @@ -412,6 +423,9 @@ static int sh_pfc_remove(struct platform_device *pdev) #endif sh_pfc_unregister_pinctrl(pfc); + if (pfc->info->ops && pfc->info->ops->exit) + pfc->info->ops->exit(pfc); + platform_set_drvdata(pdev, NULL); return 0; @@ -424,9 +438,15 @@ static const struct platform_device_id sh_pfc_id_table[] = { #ifdef CONFIG_PINCTRL_PFC_R8A7740 { "pfc-r8a7740", (kernel_ulong_t)&r8a7740_pinmux_info }, #endif +#ifdef CONFIG_PINCTRL_PFC_R8A7778 + { "pfc-r8a7778", (kernel_ulong_t)&r8a7778_pinmux_info }, +#endif #ifdef CONFIG_PINCTRL_PFC_R8A7779 { "pfc-r8a7779", (kernel_ulong_t)&r8a7779_pinmux_info }, #endif +#ifdef CONFIG_PINCTRL_PFC_R8A7790 + { "pfc-r8a7790", (kernel_ulong_t)&r8a7790_pinmux_info }, +#endif #ifdef CONFIG_PINCTRL_PFC_SH7203 { "pfc-sh7203", (kernel_ulong_t)&sh7203_pinmux_info }, #endif diff --git a/drivers/pinctrl/sh-pfc/core.h b/drivers/pinctrl/sh-pfc/core.h index 89cb4289d76..f02ba1dde3a 100644 --- a/drivers/pinctrl/sh-pfc/core.h +++ b/drivers/pinctrl/sh-pfc/core.h @@ -11,6 +11,7 @@ #define __SH_PFC_CORE_H__ #include <linux/compiler.h> +#include <linux/spinlock.h> #include <linux/types.h> #include "sh_pfc.h" @@ -27,6 +28,7 @@ struct sh_pfc_pinctrl; struct sh_pfc { struct device *dev; const struct sh_pfc_soc_info *info; + void *soc_data; spinlock_t lock; unsigned int num_windows; @@ -56,7 +58,9 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type); extern const struct sh_pfc_soc_info r8a73a4_pinmux_info; extern const struct sh_pfc_soc_info r8a7740_pinmux_info; +extern const struct sh_pfc_soc_info r8a7778_pinmux_info; extern const struct sh_pfc_soc_info r8a7779_pinmux_info; +extern const struct sh_pfc_soc_info r8a7790_pinmux_info; extern const struct sh_pfc_soc_info sh7203_pinmux_info; extern const struct sh_pfc_soc_info sh7264_pinmux_info; extern const struct sh_pfc_soc_info sh7269_pinmux_info; diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c index bbd87d29bfd..f6ea47c433b 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c @@ -18,10 +18,14 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/io.h> #include <linux/kernel.h> +#include <linux/pinctrl/pinconf-generic.h> + #include <mach/r8a7740.h> #include <mach/irqs.h> +#include "core.h" #include "sh_pfc.h" #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -30,6 +34,29 @@ PORT_10(fn, pfx##20, sfx), \ PORT_1(fn, pfx##210, sfx), PORT_1(fn, pfx##211, sfx) +#undef _GPIO_PORT +#define _GPIO_PORT(gpio, sfx) \ + [gpio] = { \ + .name = __stringify(PORT##gpio), \ + .enum_id = PORT##gpio##_DATA, \ + } + +#define IRQC_PIN_MUX(irq, pin) \ +static const unsigned int intc_irq##irq##_pins[] = { \ + pin, \ +}; \ +static const unsigned int intc_irq##irq##_mux[] = { \ + IRQ##irq##_MARK, \ +} + +#define IRQC_PINS_MUX(irq, idx, pin) \ +static const unsigned int intc_irq##irq##_##idx##_pins[] = { \ + pin, \ +}; \ +static const unsigned int intc_irq##irq##_##idx##_mux[] = { \ + IRQ##irq##_PORT##pin##_MARK, \ +} + enum { PINMUX_RESERVED = 0, @@ -43,16 +70,6 @@ enum { PORT_ALL(IN), PINMUX_INPUT_END, - /* PORT0_IN_PU -> PORT211_IN_PU */ - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), - PINMUX_INPUT_PULLUP_END, - - /* PORT0_IN_PD -> PORT211_IN_PD */ - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), - PINMUX_INPUT_PULLDOWN_END, - /* PORT0_OUT -> PORT211_OUT */ PINMUX_OUTPUT_BEGIN, PORT_ALL(OUT), @@ -261,8 +278,6 @@ enum { SCIFB_CTS_PORT173_MARK, /* LCD0 */ - LCDC0_SELECT_MARK, - LCD0_D0_MARK, LCD0_D1_MARK, LCD0_D2_MARK, LCD0_D3_MARK, LCD0_D4_MARK, LCD0_D5_MARK, LCD0_D6_MARK, LCD0_D7_MARK, LCD0_D8_MARK, LCD0_D9_MARK, LCD0_D10_MARK, LCD0_D11_MARK, @@ -285,8 +300,6 @@ enum { LCD0_LCLK_PORT102_MARK, /* LCD1 */ - LCDC1_SELECT_MARK, - LCD1_D0_MARK, LCD1_D1_MARK, LCD1_D2_MARK, LCD1_D3_MARK, LCD1_D4_MARK, LCD1_D5_MARK, LCD1_D6_MARK, LCD1_D7_MARK, LCD1_D8_MARK, LCD1_D9_MARK, LCD1_D10_MARK, LCD1_D11_MARK, @@ -577,137 +590,11 @@ enum { PINMUX_MARK_END, }; +#define _PORT_DATA(pfx, sfx) PORT_DATA_IO(pfx) +#define PINMUX_DATA_GP_ALL() CPU_ALL_PORT(_PORT_DATA, , unused) + static const pinmux_enum_t pinmux_data[] = { - /* specify valid pin states for each pin in GPIO mode */ - - /* I/O and Pull U/D */ - PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1), - PORT_DATA_IO_PD(2), PORT_DATA_IO_PD(3), - PORT_DATA_IO_PD(4), PORT_DATA_IO_PD(5), - PORT_DATA_IO_PD(6), PORT_DATA_IO(7), - PORT_DATA_IO(8), PORT_DATA_IO(9), - - PORT_DATA_IO_PD(10), PORT_DATA_IO_PD(11), - PORT_DATA_IO_PD(12), PORT_DATA_IO_PU_PD(13), - PORT_DATA_IO_PD(14), PORT_DATA_IO_PD(15), - PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17), - PORT_DATA_IO(18), PORT_DATA_IO_PU(19), - - PORT_DATA_IO_PU_PD(20), PORT_DATA_IO_PD(21), - PORT_DATA_IO_PU_PD(22), PORT_DATA_IO(23), - PORT_DATA_IO_PU(24), PORT_DATA_IO_PU(25), - PORT_DATA_IO_PU(26), PORT_DATA_IO_PU(27), - PORT_DATA_IO_PU(28), PORT_DATA_IO_PU(29), - - PORT_DATA_IO_PU(30), PORT_DATA_IO_PD(31), - PORT_DATA_IO_PD(32), PORT_DATA_IO_PD(33), - PORT_DATA_IO_PD(34), PORT_DATA_IO_PU(35), - PORT_DATA_IO_PU(36), PORT_DATA_IO_PD(37), - PORT_DATA_IO_PU(38), PORT_DATA_IO_PD(39), - - PORT_DATA_IO_PU_PD(40), PORT_DATA_IO_PD(41), - PORT_DATA_IO_PD(42), PORT_DATA_IO_PU_PD(43), - PORT_DATA_IO_PU_PD(44), PORT_DATA_IO_PU_PD(45), - PORT_DATA_IO_PU_PD(46), PORT_DATA_IO_PU_PD(47), - PORT_DATA_IO_PU_PD(48), PORT_DATA_IO_PU_PD(49), - - PORT_DATA_IO_PU_PD(50), PORT_DATA_IO_PD(51), - PORT_DATA_IO_PD(52), PORT_DATA_IO_PD(53), - PORT_DATA_IO_PD(54), PORT_DATA_IO_PU_PD(55), - PORT_DATA_IO_PU_PD(56), PORT_DATA_IO_PU_PD(57), - PORT_DATA_IO_PU_PD(58), PORT_DATA_IO_PU_PD(59), - - PORT_DATA_IO_PU_PD(60), PORT_DATA_IO_PD(61), - PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63), - PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65), - PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67), - PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69), - - PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71), - PORT_DATA_IO_PU_PD(72), PORT_DATA_IO_PU_PD(73), - PORT_DATA_IO_PU_PD(74), PORT_DATA_IO_PU_PD(75), - PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77), - PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79), - - PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81), - PORT_DATA_IO(82), PORT_DATA_IO_PU_PD(83), - PORT_DATA_IO(84), PORT_DATA_IO_PD(85), - PORT_DATA_IO_PD(86), PORT_DATA_IO_PD(87), - PORT_DATA_IO_PD(88), PORT_DATA_IO_PD(89), - - PORT_DATA_IO_PD(90), PORT_DATA_IO_PU_PD(91), - PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93), - PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95), - PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), - PORT_DATA_IO_PU_PD(98), PORT_DATA_IO_PU_PD(99), - - PORT_DATA_IO_PU_PD(100), PORT_DATA_IO(101), - PORT_DATA_IO_PU(102), PORT_DATA_IO_PU_PD(103), - PORT_DATA_IO_PU(104), PORT_DATA_IO_PU(105), - PORT_DATA_IO_PU_PD(106), PORT_DATA_IO(107), - PORT_DATA_IO(108), PORT_DATA_IO(109), - - PORT_DATA_IO(110), PORT_DATA_IO(111), - PORT_DATA_IO(112), PORT_DATA_IO(113), - PORT_DATA_IO_PU_PD(114), PORT_DATA_IO(115), - PORT_DATA_IO_PD(116), PORT_DATA_IO_PD(117), - PORT_DATA_IO_PD(118), PORT_DATA_IO_PD(119), - - PORT_DATA_IO_PD(120), PORT_DATA_IO_PD(121), - PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123), - PORT_DATA_IO_PD(124), PORT_DATA_IO(125), - PORT_DATA_IO(126), PORT_DATA_IO(127), - PORT_DATA_IO(128), PORT_DATA_IO(129), - - PORT_DATA_IO(130), PORT_DATA_IO(131), - PORT_DATA_IO(132), PORT_DATA_IO(133), - PORT_DATA_IO(134), PORT_DATA_IO(135), - PORT_DATA_IO(136), PORT_DATA_IO(137), - PORT_DATA_IO(138), PORT_DATA_IO(139), - - PORT_DATA_IO(140), PORT_DATA_IO(141), - PORT_DATA_IO_PU(142), PORT_DATA_IO_PU(143), - PORT_DATA_IO_PU(144), PORT_DATA_IO_PU(145), - PORT_DATA_IO_PU(146), PORT_DATA_IO_PU(147), - PORT_DATA_IO_PU(148), PORT_DATA_IO_PU(149), - - PORT_DATA_IO_PU(150), PORT_DATA_IO_PU(151), - PORT_DATA_IO_PU(152), PORT_DATA_IO_PU(153), - PORT_DATA_IO_PU(154), PORT_DATA_IO_PU(155), - PORT_DATA_IO_PU(156), PORT_DATA_IO_PU(157), - PORT_DATA_IO_PD(158), PORT_DATA_IO_PD(159), - - PORT_DATA_IO_PU_PD(160), PORT_DATA_IO_PD(161), - PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), - PORT_DATA_IO_PD(164), PORT_DATA_IO_PD(165), - PORT_DATA_IO_PU(166), PORT_DATA_IO_PU(167), - PORT_DATA_IO_PU(168), PORT_DATA_IO_PU(169), - - PORT_DATA_IO_PU(170), PORT_DATA_IO_PU(171), - PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173), - PORT_DATA_IO_PD(174), PORT_DATA_IO_PD(175), - PORT_DATA_IO_PU(176), PORT_DATA_IO_PU_PD(177), - PORT_DATA_IO_PU(178), PORT_DATA_IO_PD(179), - - PORT_DATA_IO_PD(180), PORT_DATA_IO_PU(181), - PORT_DATA_IO_PU(182), PORT_DATA_IO(183), - PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), - PORT_DATA_IO_PD(186), PORT_DATA_IO_PD(187), - PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189), - - PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), - PORT_DATA_IO_PD(192), PORT_DATA_IO_PU_PD(193), - PORT_DATA_IO_PU_PD(194), PORT_DATA_IO_PD(195), - PORT_DATA_IO_PU_PD(196), PORT_DATA_IO_PD(197), - PORT_DATA_IO_PU_PD(198), PORT_DATA_IO_PU_PD(199), - - PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU(201), - PORT_DATA_IO_PU_PD(202), PORT_DATA_IO(203), - PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205), - PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PU_PD(207), - PORT_DATA_IO_PU_PD(208), PORT_DATA_IO_PD(209), - - PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), + PINMUX_DATA_GP_ALL(), /* Port0 */ PINMUX_DATA(DBGMDT2_MARK, PORT0_FN1), @@ -986,7 +873,7 @@ static const pinmux_enum_t pinmux_data[] = { PINMUX_DATA(IRQ27_PORT57_MARK, PORT57_FN0, MSEL1CR_27_1), /* Port58 */ - PINMUX_DATA(LCD0_D0_MARK, PORT58_FN1), + PINMUX_DATA(LCD0_D0_MARK, PORT58_FN1, MSEL3CR_6_0), PINMUX_DATA(KEYOUT7_MARK, PORT58_FN3), PINMUX_DATA(KEYIN0_PORT58_MARK, PORT58_FN4, MSEL4CR_18_1), PINMUX_DATA(DV_D0_MARK, PORT58_FN6), @@ -1633,10 +1520,6 @@ static const pinmux_enum_t pinmux_data[] = { PINMUX_DATA(IRQ16_PORT211_MARK, PORT211_FN0, MSEL1CR_16_1), PINMUX_DATA(HDMI_CEC_MARK, PORT211_FN1), - /* LCDC select */ - PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0), - PINMUX_DATA(LCDC1_SELECT_MARK, MSEL3CR_6_1), - /* SDENC */ PINMUX_DATA(SDENC_CPG_MARK, MSEL4CR_19_0), PINMUX_DATA(SDENC_DV_CLKI_MARK, MSEL4CR_19_1), @@ -1654,9 +1537,565 @@ static const pinmux_enum_t pinmux_data[] = { PINMUX_DATA(TRACEAUD_FROM_MEMC_MARK, MSEL5CR_30_1, MSEL5CR_29_0), }; +#define R8A7740_PIN(pin, cfgs) \ + { \ + .name = __stringify(PORT##pin), \ + .enum_id = PORT##pin##_DATA, \ + .configs = cfgs, \ + } + +#define __I (SH_PFC_PIN_CFG_INPUT) +#define __O (SH_PFC_PIN_CFG_OUTPUT) +#define __IO (SH_PFC_PIN_CFG_INPUT | SH_PFC_PIN_CFG_OUTPUT) +#define __PD (SH_PFC_PIN_CFG_PULL_DOWN) +#define __PU (SH_PFC_PIN_CFG_PULL_UP) +#define __PUD (SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP) + +#define R8A7740_PIN_I_PD(pin) R8A7740_PIN(pin, __I | __PD) +#define R8A7740_PIN_I_PU(pin) R8A7740_PIN(pin, __I | __PU) +#define R8A7740_PIN_I_PU_PD(pin) R8A7740_PIN(pin, __I | __PUD) +#define R8A7740_PIN_IO(pin) R8A7740_PIN(pin, __IO) +#define R8A7740_PIN_IO_PD(pin) R8A7740_PIN(pin, __IO | __PD) +#define R8A7740_PIN_IO_PU(pin) R8A7740_PIN(pin, __IO | __PU) +#define R8A7740_PIN_IO_PU_PD(pin) R8A7740_PIN(pin, __IO | __PUD) +#define R8A7740_PIN_O(pin) R8A7740_PIN(pin, __O) +#define R8A7740_PIN_O_PU_PD(pin) R8A7740_PIN(pin, __O | __PUD) + static struct sh_pfc_pin pinmux_pins[] = { - GPIO_PORT_ALL(), + /* Table 56-1 (I/O and Pull U/D) */ + R8A7740_PIN_IO_PD(0), R8A7740_PIN_IO_PD(1), + R8A7740_PIN_IO_PD(2), R8A7740_PIN_IO_PD(3), + R8A7740_PIN_IO_PD(4), R8A7740_PIN_IO_PD(5), + R8A7740_PIN_IO_PD(6), R8A7740_PIN_IO(7), + R8A7740_PIN_IO(8), R8A7740_PIN_IO(9), + R8A7740_PIN_IO_PD(10), R8A7740_PIN_IO_PD(11), + R8A7740_PIN_IO_PD(12), R8A7740_PIN_IO_PU_PD(13), + R8A7740_PIN_IO_PD(14), R8A7740_PIN_IO_PD(15), + R8A7740_PIN_IO_PD(16), R8A7740_PIN_IO_PD(17), + R8A7740_PIN_IO(18), R8A7740_PIN_IO_PU(19), + R8A7740_PIN_IO_PU_PD(20), R8A7740_PIN_IO_PD(21), + R8A7740_PIN_IO_PU_PD(22), R8A7740_PIN_IO(23), + R8A7740_PIN_IO_PU(24), R8A7740_PIN_IO_PU(25), + R8A7740_PIN_IO_PU(26), R8A7740_PIN_IO_PU(27), + R8A7740_PIN_IO_PU(28), R8A7740_PIN_IO_PU(29), + R8A7740_PIN_IO_PU(30), R8A7740_PIN_IO_PD(31), + R8A7740_PIN_IO_PD(32), R8A7740_PIN_IO_PD(33), + R8A7740_PIN_IO_PD(34), R8A7740_PIN_IO_PU(35), + R8A7740_PIN_IO_PU(36), R8A7740_PIN_IO_PD(37), + R8A7740_PIN_IO_PU(38), R8A7740_PIN_IO_PD(39), + R8A7740_PIN_IO_PU_PD(40), R8A7740_PIN_IO_PD(41), + R8A7740_PIN_IO_PD(42), R8A7740_PIN_IO_PU_PD(43), + R8A7740_PIN_IO_PU_PD(44), R8A7740_PIN_IO_PU_PD(45), + R8A7740_PIN_IO_PU_PD(46), R8A7740_PIN_IO_PU_PD(47), + R8A7740_PIN_IO_PU_PD(48), R8A7740_PIN_IO_PU_PD(49), + R8A7740_PIN_IO_PU_PD(50), R8A7740_PIN_IO_PD(51), + R8A7740_PIN_IO_PD(52), R8A7740_PIN_IO_PD(53), + R8A7740_PIN_IO_PD(54), R8A7740_PIN_IO_PU_PD(55), + R8A7740_PIN_IO_PU_PD(56), R8A7740_PIN_IO_PU_PD(57), + R8A7740_PIN_IO_PU_PD(58), R8A7740_PIN_IO_PU_PD(59), + R8A7740_PIN_IO_PU_PD(60), R8A7740_PIN_IO_PD(61), + R8A7740_PIN_IO_PD(62), R8A7740_PIN_IO_PD(63), + R8A7740_PIN_IO_PD(64), R8A7740_PIN_IO_PD(65), + R8A7740_PIN_IO_PU_PD(66), R8A7740_PIN_IO_PU_PD(67), + R8A7740_PIN_IO_PU_PD(68), R8A7740_PIN_IO_PU_PD(69), + R8A7740_PIN_IO_PU_PD(70), R8A7740_PIN_IO_PU_PD(71), + R8A7740_PIN_IO_PU_PD(72), R8A7740_PIN_IO_PU_PD(73), + R8A7740_PIN_IO_PU_PD(74), R8A7740_PIN_IO_PU_PD(75), + R8A7740_PIN_IO_PU_PD(76), R8A7740_PIN_IO_PU_PD(77), + R8A7740_PIN_IO_PU_PD(78), R8A7740_PIN_IO_PU_PD(79), + R8A7740_PIN_IO_PU_PD(80), R8A7740_PIN_IO_PU_PD(81), + R8A7740_PIN_IO(82), R8A7740_PIN_IO_PU_PD(83), + R8A7740_PIN_IO(84), R8A7740_PIN_IO_PD(85), + R8A7740_PIN_IO_PD(86), R8A7740_PIN_IO_PD(87), + R8A7740_PIN_IO_PD(88), R8A7740_PIN_IO_PD(89), + R8A7740_PIN_IO_PD(90), R8A7740_PIN_IO_PU_PD(91), + R8A7740_PIN_IO_PU_PD(92), R8A7740_PIN_IO_PU_PD(93), + R8A7740_PIN_IO_PU_PD(94), R8A7740_PIN_IO_PU_PD(95), + R8A7740_PIN_IO_PU_PD(96), R8A7740_PIN_IO_PU_PD(97), + R8A7740_PIN_IO_PU_PD(98), R8A7740_PIN_IO_PU_PD(99), + R8A7740_PIN_IO_PU_PD(100), R8A7740_PIN_IO(101), + R8A7740_PIN_IO_PU(102), R8A7740_PIN_IO_PU_PD(103), + R8A7740_PIN_IO_PU(104), R8A7740_PIN_IO_PU(105), + R8A7740_PIN_IO_PU_PD(106), R8A7740_PIN_IO(107), + R8A7740_PIN_IO(108), R8A7740_PIN_IO(109), + R8A7740_PIN_IO(110), R8A7740_PIN_IO(111), + R8A7740_PIN_IO(112), R8A7740_PIN_IO(113), + R8A7740_PIN_IO_PU_PD(114), R8A7740_PIN_IO(115), + R8A7740_PIN_IO_PD(116), R8A7740_PIN_IO_PD(117), + R8A7740_PIN_IO_PD(118), R8A7740_PIN_IO_PD(119), + R8A7740_PIN_IO_PD(120), R8A7740_PIN_IO_PD(121), + R8A7740_PIN_IO_PD(122), R8A7740_PIN_IO_PD(123), + R8A7740_PIN_IO_PD(124), R8A7740_PIN_IO(125), + R8A7740_PIN_IO(126), R8A7740_PIN_IO(127), + R8A7740_PIN_IO(128), R8A7740_PIN_IO(129), + R8A7740_PIN_IO(130), R8A7740_PIN_IO(131), + R8A7740_PIN_IO(132), R8A7740_PIN_IO(133), + R8A7740_PIN_IO(134), R8A7740_PIN_IO(135), + R8A7740_PIN_IO(136), R8A7740_PIN_IO(137), + R8A7740_PIN_IO(138), R8A7740_PIN_IO(139), + R8A7740_PIN_IO(140), R8A7740_PIN_IO(141), + R8A7740_PIN_IO_PU(142), R8A7740_PIN_IO_PU(143), + R8A7740_PIN_IO_PU(144), R8A7740_PIN_IO_PU(145), + R8A7740_PIN_IO_PU(146), R8A7740_PIN_IO_PU(147), + R8A7740_PIN_IO_PU(148), R8A7740_PIN_IO_PU(149), + R8A7740_PIN_IO_PU(150), R8A7740_PIN_IO_PU(151), + R8A7740_PIN_IO_PU(152), R8A7740_PIN_IO_PU(153), + R8A7740_PIN_IO_PU(154), R8A7740_PIN_IO_PU(155), + R8A7740_PIN_IO_PU(156), R8A7740_PIN_IO_PU(157), + R8A7740_PIN_IO_PD(158), R8A7740_PIN_IO_PD(159), + R8A7740_PIN_IO_PU_PD(160), R8A7740_PIN_IO_PD(161), + R8A7740_PIN_IO_PD(162), R8A7740_PIN_IO_PD(163), + R8A7740_PIN_IO_PD(164), R8A7740_PIN_IO_PD(165), + R8A7740_PIN_IO_PU(166), R8A7740_PIN_IO_PU(167), + R8A7740_PIN_IO_PU(168), R8A7740_PIN_IO_PU(169), + R8A7740_PIN_IO_PU(170), R8A7740_PIN_IO_PU(171), + R8A7740_PIN_IO_PD(172), R8A7740_PIN_IO_PD(173), + R8A7740_PIN_IO_PD(174), R8A7740_PIN_IO_PD(175), + R8A7740_PIN_IO_PU(176), R8A7740_PIN_IO_PU_PD(177), + R8A7740_PIN_IO_PU(178), R8A7740_PIN_IO_PD(179), + R8A7740_PIN_IO_PD(180), R8A7740_PIN_IO_PU(181), + R8A7740_PIN_IO_PU(182), R8A7740_PIN_IO(183), + R8A7740_PIN_IO_PD(184), R8A7740_PIN_IO_PD(185), + R8A7740_PIN_IO_PD(186), R8A7740_PIN_IO_PD(187), + R8A7740_PIN_IO_PD(188), R8A7740_PIN_IO_PD(189), + R8A7740_PIN_IO_PD(190), R8A7740_PIN_IO_PD(191), + R8A7740_PIN_IO_PD(192), R8A7740_PIN_IO_PU_PD(193), + R8A7740_PIN_IO_PU_PD(194), R8A7740_PIN_IO_PD(195), + R8A7740_PIN_IO_PU_PD(196), R8A7740_PIN_IO_PD(197), + R8A7740_PIN_IO_PU_PD(198), R8A7740_PIN_IO_PU_PD(199), + R8A7740_PIN_IO_PU_PD(200), R8A7740_PIN_IO_PU(201), + R8A7740_PIN_IO_PU_PD(202), R8A7740_PIN_IO(203), + R8A7740_PIN_IO_PU_PD(204), R8A7740_PIN_IO_PU_PD(205), + R8A7740_PIN_IO_PU_PD(206), R8A7740_PIN_IO_PU_PD(207), + R8A7740_PIN_IO_PU_PD(208), R8A7740_PIN_IO_PD(209), + R8A7740_PIN_IO_PD(210), R8A7740_PIN_IO_PD(211), +}; + +/* - BSC -------------------------------------------------------------------- */ +static const unsigned int bsc_data8_pins[] = { + /* D[0:7] */ + 157, 156, 155, 154, 153, 152, 151, 150, +}; +static const unsigned int bsc_data8_mux[] = { + D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, D3_NAF3_MARK, + D4_NAF4_MARK, D5_NAF5_MARK, D6_NAF6_MARK, D7_NAF7_MARK, +}; +static const unsigned int bsc_data16_pins[] = { + /* D[0:15] */ + 157, 156, 155, 154, 153, 152, 151, 150, + 149, 148, 147, 146, 145, 144, 143, 142, +}; +static const unsigned int bsc_data16_mux[] = { + D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, D3_NAF3_MARK, + D4_NAF4_MARK, D5_NAF5_MARK, D6_NAF6_MARK, D7_NAF7_MARK, + D8_NAF8_MARK, D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK, + D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, D15_NAF15_MARK, +}; +static const unsigned int bsc_data32_pins[] = { + /* D[0:31] */ + 157, 156, 155, 154, 153, 152, 151, 150, + 149, 148, 147, 146, 145, 144, 143, 142, + 171, 170, 169, 168, 167, 166, 173, 172, + 165, 164, 163, 162, 161, 160, 159, 158, +}; +static const unsigned int bsc_data32_mux[] = { + D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, D3_NAF3_MARK, + D4_NAF4_MARK, D5_NAF5_MARK, D6_NAF6_MARK, D7_NAF7_MARK, + D8_NAF8_MARK, D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK, + D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, D15_NAF15_MARK, + D16_MARK, D17_MARK, D18_MARK, D19_MARK, + D20_MARK, D21_MARK, D22_MARK, D23_MARK, + D24_MARK, D25_MARK, D26_MARK, D27_MARK, + D28_MARK, D29_MARK, D30_MARK, D31_MARK, +}; +static const unsigned int bsc_cs0_pins[] = { + /* CS */ + 109, +}; +static const unsigned int bsc_cs0_mux[] = { + CS0_MARK, +}; +static const unsigned int bsc_cs2_pins[] = { + /* CS */ + 110, +}; +static const unsigned int bsc_cs2_mux[] = { + CS2_MARK, +}; +static const unsigned int bsc_cs4_pins[] = { + /* CS */ + 111, +}; +static const unsigned int bsc_cs4_mux[] = { + CS4_MARK, +}; +static const unsigned int bsc_cs5a_0_pins[] = { + /* CS */ + 105, +}; +static const unsigned int bsc_cs5a_0_mux[] = { + CS5A_PORT105_MARK, +}; +static const unsigned int bsc_cs5a_1_pins[] = { + /* CS */ + 19, +}; +static const unsigned int bsc_cs5a_1_mux[] = { + CS5A_PORT19_MARK, +}; +static const unsigned int bsc_cs5b_pins[] = { + /* CS */ + 103, +}; +static const unsigned int bsc_cs5b_mux[] = { + CS5B_MARK, +}; +static const unsigned int bsc_cs6a_pins[] = { + /* CS */ + 104, +}; +static const unsigned int bsc_cs6a_mux[] = { + CS6A_MARK, +}; +static const unsigned int bsc_rd_we8_pins[] = { + /* RD, WE[0] */ + 115, 113, +}; +static const unsigned int bsc_rd_we8_mux[] = { + RD_FSC_MARK, WE0_FWE_MARK, +}; +static const unsigned int bsc_rd_we16_pins[] = { + /* RD, WE[0:1] */ + 115, 113, 112, +}; +static const unsigned int bsc_rd_we16_mux[] = { + RD_FSC_MARK, WE0_FWE_MARK, WE1_MARK, +}; +static const unsigned int bsc_rd_we32_pins[] = { + /* RD, WE[0:3] */ + 115, 113, 112, 108, 107, +}; +static const unsigned int bsc_rd_we32_mux[] = { + RD_FSC_MARK, WE0_FWE_MARK, WE1_MARK, WE2_ICIORD_MARK, WE3_ICIOWR_MARK, +}; +static const unsigned int bsc_bs_pins[] = { + /* BS */ + 175, +}; +static const unsigned int bsc_bs_mux[] = { + BS_MARK, +}; +static const unsigned int bsc_rdwr_pins[] = { + /* RDWR */ + 114, +}; +static const unsigned int bsc_rdwr_mux[] = { + RDWR_MARK, +}; +/* - CEU0 ------------------------------------------------------------------- */ +static const unsigned int ceu0_data_0_7_pins[] = { + /* D[0:7] */ + 34, 33, 32, 31, 30, 29, 28, 27, +}; +static const unsigned int ceu0_data_0_7_mux[] = { + VIO0_D0_MARK, VIO0_D1_MARK, VIO0_D2_MARK, VIO0_D3_MARK, + VIO0_D4_MARK, VIO0_D5_MARK, VIO0_D6_MARK, VIO0_D7_MARK, +}; +static const unsigned int ceu0_data_8_15_0_pins[] = { + /* D[8:15] */ + 182, 181, 180, 179, 178, 26, 25, 24, +}; +static const unsigned int ceu0_data_8_15_0_mux[] = { + VIO0_D8_MARK, VIO0_D9_MARK, VIO0_D10_MARK, VIO0_D11_MARK, + VIO0_D12_MARK, VIO0_D13_PORT26_MARK, VIO0_D14_PORT25_MARK, + VIO0_D15_PORT24_MARK, +}; +static const unsigned int ceu0_data_8_15_1_pins[] = { + /* D[8:15] */ + 182, 181, 180, 179, 178, 22, 95, 96, +}; +static const unsigned int ceu0_data_8_15_1_mux[] = { + VIO0_D8_MARK, VIO0_D9_MARK, VIO0_D10_MARK, VIO0_D11_MARK, + VIO0_D12_MARK, VIO0_D13_PORT22_MARK, VIO0_D14_PORT95_MARK, + VIO0_D15_PORT96_MARK, +}; +static const unsigned int ceu0_clk_0_pins[] = { + /* CKO */ + 36, +}; +static const unsigned int ceu0_clk_0_mux[] = { + VIO_CKO_MARK, +}; +static const unsigned int ceu0_clk_1_pins[] = { + /* CKO */ + 14, +}; +static const unsigned int ceu0_clk_1_mux[] = { + VIO_CKO1_MARK, +}; +static const unsigned int ceu0_clk_2_pins[] = { + /* CKO */ + 15, +}; +static const unsigned int ceu0_clk_2_mux[] = { + VIO_CKO2_MARK, +}; +static const unsigned int ceu0_sync_pins[] = { + /* CLK, VD, HD */ + 35, 39, 37, +}; +static const unsigned int ceu0_sync_mux[] = { + VIO0_CLK_MARK, VIO0_VD_MARK, VIO0_HD_MARK, +}; +static const unsigned int ceu0_field_pins[] = { + /* FIELD */ + 38, +}; +static const unsigned int ceu0_field_mux[] = { + VIO0_FIELD_MARK, +}; +/* - CEU1 ------------------------------------------------------------------- */ +static const unsigned int ceu1_data_pins[] = { + /* D[0:7] */ + 182, 181, 180, 179, 178, 26, 25, 24, +}; +static const unsigned int ceu1_data_mux[] = { + VIO1_D0_MARK, VIO1_D1_MARK, VIO1_D2_MARK, VIO1_D3_MARK, + VIO1_D4_MARK, VIO1_D5_MARK, VIO1_D6_MARK, VIO1_D7_MARK, +}; +static const unsigned int ceu1_clk_pins[] = { + /* CKO */ + 23, +}; +static const unsigned int ceu1_clk_mux[] = { + VIO_CKO_1_MARK, +}; +static const unsigned int ceu1_sync_pins[] = { + /* CLK, VD, HD */ + 197, 198, 160, +}; +static const unsigned int ceu1_sync_mux[] = { + VIO1_CLK_MARK, VIO1_VD_MARK, VIO1_HD_MARK, +}; +static const unsigned int ceu1_field_pins[] = { + /* FIELD */ + 21, +}; +static const unsigned int ceu1_field_mux[] = { + VIO1_FIELD_MARK, +}; +/* - FSIA ------------------------------------------------------------------- */ +static const unsigned int fsia_mclk_in_pins[] = { + /* CK */ + 11, +}; +static const unsigned int fsia_mclk_in_mux[] = { + FSIACK_MARK, +}; +static const unsigned int fsia_mclk_out_pins[] = { + /* OMC */ + 10, +}; +static const unsigned int fsia_mclk_out_mux[] = { + FSIAOMC_MARK, +}; +static const unsigned int fsia_sclk_in_pins[] = { + /* ILR, IBT */ + 12, 13, +}; +static const unsigned int fsia_sclk_in_mux[] = { + FSIAILR_MARK, FSIAIBT_MARK, +}; +static const unsigned int fsia_sclk_out_pins[] = { + /* OLR, OBT */ + 7, 8, +}; +static const unsigned int fsia_sclk_out_mux[] = { + FSIAOLR_MARK, FSIAOBT_MARK, +}; +static const unsigned int fsia_data_in_0_pins[] = { + /* ISLD */ + 0, }; +static const unsigned int fsia_data_in_0_mux[] = { + FSIAISLD_PORT0_MARK, +}; +static const unsigned int fsia_data_in_1_pins[] = { + /* ISLD */ + 5, +}; +static const unsigned int fsia_data_in_1_mux[] = { + FSIAISLD_PORT5_MARK, +}; +static const unsigned int fsia_data_out_0_pins[] = { + /* OSLD */ + 9, +}; +static const unsigned int fsia_data_out_0_mux[] = { + FSIAOSLD_MARK, +}; +static const unsigned int fsia_data_out_1_pins[] = { + /* OSLD */ + 0, +}; +static const unsigned int fsia_data_out_1_mux[] = { + FSIAOSLD1_MARK, +}; +static const unsigned int fsia_data_out_2_pins[] = { + /* OSLD */ + 1, +}; +static const unsigned int fsia_data_out_2_mux[] = { + FSIAOSLD2_MARK, +}; +static const unsigned int fsia_spdif_0_pins[] = { + /* SPDIF */ + 9, +}; +static const unsigned int fsia_spdif_0_mux[] = { + FSIASPDIF_PORT9_MARK, +}; +static const unsigned int fsia_spdif_1_pins[] = { + /* SPDIF */ + 18, +}; +static const unsigned int fsia_spdif_1_mux[] = { + FSIASPDIF_PORT18_MARK, +}; +/* - FSIB ------------------------------------------------------------------- */ +static const unsigned int fsib_mclk_in_pins[] = { + /* CK */ + 11, +}; +static const unsigned int fsib_mclk_in_mux[] = { + FSIBCK_MARK, +}; +/* - GETHER ----------------------------------------------------------------- */ +static const unsigned int gether_rmii_pins[] = { + /* RXD[0:1], RX_ER, CRS_DV, TXD[0:1], TX_EN, REF_CLK, MDC, MDIO */ + 195, 196, 194, 193, 200, 201, 199, 159, 202, 208, +}; +static const unsigned int gether_rmii_mux[] = { + RMII_RXD0_MARK, RMII_RXD1_MARK, RMII_RX_ER_MARK, RMII_CRS_DV_MARK, + RMII_TXD0_MARK, RMII_TXD1_MARK, RMII_TX_EN_MARK, RMII_REF50CK_MARK, + RMII_MDC_MARK, RMII_MDIO_MARK, +}; +static const unsigned int gether_mii_pins[] = { + /* RXD[0:3], RX_CLK, RX_DV, RX_ER + * TXD[0:3], TX_CLK, TX_EN, TX_ER + * CRS, COL, MDC, MDIO, + */ + 185, 186, 187, 188, 174, 161, 204, + 171, 170, 169, 168, 184, 183, 203, + 205, 163, 206, 207, +}; +static const unsigned int gether_mii_mux[] = { + ET_ERXD0_MARK, ET_ERXD1_MARK, ET_ERXD2_MARK, ET_ERXD3_MARK, + ET_RX_CLK_MARK, ET_RX_DV_MARK, ET_RX_ER_MARK, + ET_ETXD0_MARK, ET_ETXD1_MARK, ET_ETXD2_MARK, ET_ETXD3_MARK, + ET_TX_CLK_MARK, ET_TX_EN_MARK, ET_TX_ER_MARK, + ET_CRS_MARK, ET_COL_MARK, ET_MDC_MARK, ET_MDIO_MARK, +}; +static const unsigned int gether_gmii_pins[] = { + /* RXD[0:7], RX_CLK, RX_DV, RX_ER + * TXD[0:7], GTX_CLK, TX_CLK, TX_EN, TX_ER + * CRS, COL, MDC, MDIO, REF125CK_MARK, + */ + 185, 186, 187, 188, 189, 190, 191, 192, 174, 161, 204, + 171, 170, 169, 168, 167, 166, 173, 172, 176, 184, 183, 203, + 205, 163, 206, 207, +}; +static const unsigned int gether_gmii_mux[] = { + ET_ERXD0_MARK, ET_ERXD1_MARK, ET_ERXD2_MARK, ET_ERXD3_MARK, + ET_ERXD4_MARK, ET_ERXD5_MARK, ET_ERXD6_MARK, ET_ERXD7_MARK, + ET_RX_CLK_MARK, ET_RX_DV_MARK, ET_RX_ER_MARK, + ET_ETXD0_MARK, ET_ETXD1_MARK, ET_ETXD2_MARK, ET_ETXD3_MARK, + ET_ETXD4_MARK, ET_ETXD5_MARK, ET_ETXD6_MARK, ET_ETXD7_MARK, + ET_GTX_CLK_MARK, ET_TX_CLK_MARK, ET_TX_EN_MARK, ET_TX_ER_MARK, + ET_CRS_MARK, ET_COL_MARK, ET_MDC_MARK, ET_MDIO_MARK, + RMII_REF125CK_MARK, +}; +static const unsigned int gether_int_pins[] = { + /* PHY_INT */ + 164, +}; +static const unsigned int gether_int_mux[] = { + ET_PHY_INT_MARK, +}; +static const unsigned int gether_link_pins[] = { + /* LINK */ + 177, +}; +static const unsigned int gether_link_mux[] = { + ET_LINK_MARK, +}; +static const unsigned int gether_wol_pins[] = { + /* WOL */ + 175, +}; +static const unsigned int gether_wol_mux[] = { + ET_WOL_MARK, +}; +/* - HDMI ------------------------------------------------------------------- */ +static const unsigned int hdmi_pins[] = { + /* HPD, CEC */ + 210, 211, +}; +static const unsigned int hdmi_mux[] = { + HDMI_HPD_MARK, HDMI_CEC_MARK, +}; +/* - INTC ------------------------------------------------------------------- */ +IRQC_PINS_MUX(0, 0, 2); +IRQC_PINS_MUX(0, 1, 13); +IRQC_PIN_MUX(1, 20); +IRQC_PINS_MUX(2, 0, 11); +IRQC_PINS_MUX(2, 1, 12); +IRQC_PINS_MUX(3, 0, 10); +IRQC_PINS_MUX(3, 1, 14); +IRQC_PINS_MUX(4, 0, 15); +IRQC_PINS_MUX(4, 1, 172); +IRQC_PINS_MUX(5, 0, 0); +IRQC_PINS_MUX(5, 1, 1); +IRQC_PINS_MUX(6, 0, 121); +IRQC_PINS_MUX(6, 1, 173); +IRQC_PINS_MUX(7, 0, 120); +IRQC_PINS_MUX(7, 1, 209); +IRQC_PIN_MUX(8, 119); +IRQC_PINS_MUX(9, 0, 118); +IRQC_PINS_MUX(9, 1, 210); +IRQC_PIN_MUX(10, 19); +IRQC_PIN_MUX(11, 104); +IRQC_PINS_MUX(12, 0, 42); +IRQC_PINS_MUX(12, 1, 97); +IRQC_PINS_MUX(13, 0, 64); +IRQC_PINS_MUX(13, 1, 98); +IRQC_PINS_MUX(14, 0, 63); +IRQC_PINS_MUX(14, 1, 99); +IRQC_PINS_MUX(15, 0, 62); +IRQC_PINS_MUX(15, 1, 100); +IRQC_PINS_MUX(16, 0, 68); +IRQC_PINS_MUX(16, 1, 211); +IRQC_PIN_MUX(17, 69); +IRQC_PIN_MUX(18, 70); +IRQC_PIN_MUX(19, 71); +IRQC_PIN_MUX(20, 67); +IRQC_PIN_MUX(21, 202); +IRQC_PIN_MUX(22, 95); +IRQC_PIN_MUX(23, 96); +IRQC_PIN_MUX(24, 180); +IRQC_PIN_MUX(25, 38); +IRQC_PINS_MUX(26, 0, 58); +IRQC_PINS_MUX(26, 1, 81); +IRQC_PINS_MUX(27, 0, 57); +IRQC_PINS_MUX(27, 1, 168); +IRQC_PINS_MUX(28, 0, 56); +IRQC_PINS_MUX(28, 1, 169); +IRQC_PINS_MUX(29, 0, 50); +IRQC_PINS_MUX(29, 1, 170); +IRQC_PINS_MUX(30, 0, 49); +IRQC_PINS_MUX(30, 1, 171); +IRQC_PINS_MUX(31, 0, 41); +IRQC_PINS_MUX(31, 1, 167); /* - LCD0 ------------------------------------------------------------------- */ static const unsigned int lcd0_data8_pins[] = { @@ -1930,6 +2369,260 @@ static const unsigned int mmc0_ctrl_1_pins[] = { static const unsigned int mmc0_ctrl_1_mux[] = { MMC1_CMD_PORT104_MARK, MMC1_CLK_PORT103_MARK, }; +/* - SCIFA0 ----------------------------------------------------------------- */ +static const unsigned int scifa0_data_pins[] = { + /* RXD, TXD */ + 197, 198, +}; +static const unsigned int scifa0_data_mux[] = { + SCIFA0_RXD_MARK, SCIFA0_TXD_MARK, +}; +static const unsigned int scifa0_clk_pins[] = { + /* SCK */ + 188, +}; +static const unsigned int scifa0_clk_mux[] = { + SCIFA0_SCK_MARK, +}; +static const unsigned int scifa0_ctrl_pins[] = { + /* RTS, CTS */ + 194, 193, +}; +static const unsigned int scifa0_ctrl_mux[] = { + SCIFA0_RTS_MARK, SCIFA0_CTS_MARK, +}; +/* - SCIFA1 ----------------------------------------------------------------- */ +static const unsigned int scifa1_data_pins[] = { + /* RXD, TXD */ + 195, 196, +}; +static const unsigned int scifa1_data_mux[] = { + SCIFA1_RXD_MARK, SCIFA1_TXD_MARK, +}; +static const unsigned int scifa1_clk_pins[] = { + /* SCK */ + 185, +}; +static const unsigned int scifa1_clk_mux[] = { + SCIFA1_SCK_MARK, +}; +static const unsigned int scifa1_ctrl_pins[] = { + /* RTS, CTS */ + 23, 21, +}; +static const unsigned int scifa1_ctrl_mux[] = { + SCIFA1_RTS_MARK, SCIFA1_CTS_MARK, +}; +/* - SCIFA2 ----------------------------------------------------------------- */ +static const unsigned int scifa2_data_pins[] = { + /* RXD, TXD */ + 200, 201, +}; +static const unsigned int scifa2_data_mux[] = { + SCIFA2_RXD_MARK, SCIFA2_TXD_MARK, +}; +static const unsigned int scifa2_clk_0_pins[] = { + /* SCK */ + 22, +}; +static const unsigned int scifa2_clk_0_mux[] = { + SCIFA2_SCK_PORT22_MARK, +}; +static const unsigned int scifa2_clk_1_pins[] = { + /* SCK */ + 199, +}; +static const unsigned int scifa2_clk_1_mux[] = { + SCIFA2_SCK_PORT199_MARK, +}; +static const unsigned int scifa2_ctrl_pins[] = { + /* RTS, CTS */ + 96, 95, +}; +static const unsigned int scifa2_ctrl_mux[] = { + SCIFA2_RTS_MARK, SCIFA2_CTS_MARK, +}; +/* - SCIFA3 ----------------------------------------------------------------- */ +static const unsigned int scifa3_data_0_pins[] = { + /* RXD, TXD */ + 174, 175, +}; +static const unsigned int scifa3_data_0_mux[] = { + SCIFA3_RXD_PORT174_MARK, SCIFA3_TXD_PORT175_MARK, +}; +static const unsigned int scifa3_clk_0_pins[] = { + /* SCK */ + 116, +}; +static const unsigned int scifa3_clk_0_mux[] = { + SCIFA3_SCK_PORT116_MARK, +}; +static const unsigned int scifa3_ctrl_0_pins[] = { + /* RTS, CTS */ + 105, 117, +}; +static const unsigned int scifa3_ctrl_0_mux[] = { + SCIFA3_RTS_PORT105_MARK, SCIFA3_CTS_PORT117_MARK, +}; +static const unsigned int scifa3_data_1_pins[] = { + /* RXD, TXD */ + 159, 160, +}; +static const unsigned int scifa3_data_1_mux[] = { + SCIFA3_RXD_PORT159_MARK, SCIFA3_TXD_PORT160_MARK, +}; +static const unsigned int scifa3_clk_1_pins[] = { + /* SCK */ + 158, +}; +static const unsigned int scifa3_clk_1_mux[] = { + SCIFA3_SCK_PORT158_MARK, +}; +static const unsigned int scifa3_ctrl_1_pins[] = { + /* RTS, CTS */ + 161, 162, +}; +static const unsigned int scifa3_ctrl_1_mux[] = { + SCIFA3_RTS_PORT161_MARK, SCIFA3_CTS_PORT162_MARK, +}; +/* - SCIFA4 ----------------------------------------------------------------- */ +static const unsigned int scifa4_data_0_pins[] = { + /* RXD, TXD */ + 12, 13, +}; +static const unsigned int scifa4_data_0_mux[] = { + SCIFA4_RXD_PORT12_MARK, SCIFA4_TXD_PORT13_MARK, +}; +static const unsigned int scifa4_data_1_pins[] = { + /* RXD, TXD */ + 204, 203, +}; +static const unsigned int scifa4_data_1_mux[] = { + SCIFA4_RXD_PORT204_MARK, SCIFA4_TXD_PORT203_MARK, +}; +static const unsigned int scifa4_data_2_pins[] = { + /* RXD, TXD */ + 94, 93, +}; +static const unsigned int scifa4_data_2_mux[] = { + SCIFA4_RXD_PORT94_MARK, SCIFA4_TXD_PORT93_MARK, +}; +static const unsigned int scifa4_clk_0_pins[] = { + /* SCK */ + 21, +}; +static const unsigned int scifa4_clk_0_mux[] = { + SCIFA4_SCK_PORT21_MARK, +}; +static const unsigned int scifa4_clk_1_pins[] = { + /* SCK */ + 205, +}; +static const unsigned int scifa4_clk_1_mux[] = { + SCIFA4_SCK_PORT205_MARK, +}; +/* - SCIFA5 ----------------------------------------------------------------- */ +static const unsigned int scifa5_data_0_pins[] = { + /* RXD, TXD */ + 10, 20, +}; +static const unsigned int scifa5_data_0_mux[] = { + SCIFA5_RXD_PORT10_MARK, SCIFA5_TXD_PORT20_MARK, +}; +static const unsigned int scifa5_data_1_pins[] = { + /* RXD, TXD */ + 207, 208, +}; +static const unsigned int scifa5_data_1_mux[] = { + SCIFA5_RXD_PORT207_MARK, SCIFA5_TXD_PORT208_MARK, +}; +static const unsigned int scifa5_data_2_pins[] = { + /* RXD, TXD */ + 92, 91, +}; +static const unsigned int scifa5_data_2_mux[] = { + SCIFA5_RXD_PORT92_MARK, SCIFA5_TXD_PORT91_MARK, +}; +static const unsigned int scifa5_clk_0_pins[] = { + /* SCK */ + 23, +}; +static const unsigned int scifa5_clk_0_mux[] = { + SCIFA5_SCK_PORT23_MARK, +}; +static const unsigned int scifa5_clk_1_pins[] = { + /* SCK */ + 206, +}; +static const unsigned int scifa5_clk_1_mux[] = { + SCIFA5_SCK_PORT206_MARK, +}; +/* - SCIFA6 ----------------------------------------------------------------- */ +static const unsigned int scifa6_data_pins[] = { + /* RXD, TXD */ + 25, 26, +}; +static const unsigned int scifa6_data_mux[] = { + SCIFA6_RXD_MARK, SCIFA6_TXD_MARK, +}; +static const unsigned int scifa6_clk_pins[] = { + /* SCK */ + 24, +}; +static const unsigned int scifa6_clk_mux[] = { + SCIFA6_SCK_MARK, +}; +/* - SCIFA7 ----------------------------------------------------------------- */ +static const unsigned int scifa7_data_pins[] = { + /* RXD, TXD */ + 0, 1, +}; +static const unsigned int scifa7_data_mux[] = { + SCIFA7_RXD_MARK, SCIFA7_TXD_MARK, +}; +/* - SCIFB ------------------------------------------------------------------ */ +static const unsigned int scifb_data_0_pins[] = { + /* RXD, TXD */ + 191, 192, +}; +static const unsigned int scifb_data_0_mux[] = { + SCIFB_RXD_PORT191_MARK, SCIFB_TXD_PORT192_MARK, +}; +static const unsigned int scifb_clk_0_pins[] = { + /* SCK */ + 190, +}; +static const unsigned int scifb_clk_0_mux[] = { + SCIFB_SCK_PORT190_MARK, +}; +static const unsigned int scifb_ctrl_0_pins[] = { + /* RTS, CTS */ + 186, 187, +}; +static const unsigned int scifb_ctrl_0_mux[] = { + SCIFB_RTS_PORT186_MARK, SCIFB_CTS_PORT187_MARK, +}; +static const unsigned int scifb_data_1_pins[] = { + /* RXD, TXD */ + 3, 4, +}; +static const unsigned int scifb_data_1_mux[] = { + SCIFB_RXD_PORT3_MARK, SCIFB_TXD_PORT4_MARK, +}; +static const unsigned int scifb_clk_1_pins[] = { + /* SCK */ + 2, +}; +static const unsigned int scifb_clk_1_mux[] = { + SCIFB_SCK_PORT2_MARK, +}; +static const unsigned int scifb_ctrl_1_pins[] = { + /* RTS, CTS */ + 172, 173, +}; +static const unsigned int scifb_ctrl_1_mux[] = { + SCIFB_RTS_PORT172_MARK, SCIFB_CTS_PORT173_MARK, +}; /* - SDHI0 ------------------------------------------------------------------ */ static const unsigned int sdhi0_data1_pins[] = { /* D0 */ @@ -2052,8 +2745,141 @@ static const unsigned int sdhi2_wp_1_pins[] = { static const unsigned int sdhi2_wp_1_mux[] = { SDHI2_WP_PORT25_MARK, }; +/* - TPU0 ------------------------------------------------------------------- */ +static const unsigned int tpu0_to0_pins[] = { + /* TO */ + 23, +}; +static const unsigned int tpu0_to0_mux[] = { + TPU0TO0_MARK, +}; +static const unsigned int tpu0_to1_pins[] = { + /* TO */ + 21, +}; +static const unsigned int tpu0_to1_mux[] = { + TPU0TO1_MARK, +}; +static const unsigned int tpu0_to2_0_pins[] = { + /* TO */ + 66, +}; +static const unsigned int tpu0_to2_0_mux[] = { + TPU0TO2_PORT66_MARK, +}; +static const unsigned int tpu0_to2_1_pins[] = { + /* TO */ + 202, +}; +static const unsigned int tpu0_to2_1_mux[] = { + TPU0TO2_PORT202_MARK, +}; +static const unsigned int tpu0_to3_pins[] = { + /* TO */ + 180, +}; +static const unsigned int tpu0_to3_mux[] = { + TPU0TO3_MARK, +}; static const struct sh_pfc_pin_group pinmux_groups[] = { + SH_PFC_PIN_GROUP(bsc_data8), + SH_PFC_PIN_GROUP(bsc_data16), + SH_PFC_PIN_GROUP(bsc_data32), + SH_PFC_PIN_GROUP(bsc_cs0), + SH_PFC_PIN_GROUP(bsc_cs2), + SH_PFC_PIN_GROUP(bsc_cs4), + SH_PFC_PIN_GROUP(bsc_cs5a_0), + SH_PFC_PIN_GROUP(bsc_cs5a_1), + SH_PFC_PIN_GROUP(bsc_cs5b), + SH_PFC_PIN_GROUP(bsc_cs6a), + SH_PFC_PIN_GROUP(bsc_rd_we8), + SH_PFC_PIN_GROUP(bsc_rd_we16), + SH_PFC_PIN_GROUP(bsc_rd_we32), + SH_PFC_PIN_GROUP(bsc_bs), + SH_PFC_PIN_GROUP(bsc_rdwr), + SH_PFC_PIN_GROUP(ceu0_data_0_7), + SH_PFC_PIN_GROUP(ceu0_data_8_15_0), + SH_PFC_PIN_GROUP(ceu0_data_8_15_1), + SH_PFC_PIN_GROUP(ceu0_clk_0), + SH_PFC_PIN_GROUP(ceu0_clk_1), + SH_PFC_PIN_GROUP(ceu0_clk_2), + SH_PFC_PIN_GROUP(ceu0_sync), + SH_PFC_PIN_GROUP(ceu0_field), + SH_PFC_PIN_GROUP(ceu1_data), + SH_PFC_PIN_GROUP(ceu1_clk), + SH_PFC_PIN_GROUP(ceu1_sync), + SH_PFC_PIN_GROUP(ceu1_field), + SH_PFC_PIN_GROUP(fsia_mclk_in), + SH_PFC_PIN_GROUP(fsia_mclk_out), + SH_PFC_PIN_GROUP(fsia_sclk_in), + SH_PFC_PIN_GROUP(fsia_sclk_out), + SH_PFC_PIN_GROUP(fsia_data_in_0), + SH_PFC_PIN_GROUP(fsia_data_in_1), + SH_PFC_PIN_GROUP(fsia_data_out_0), + SH_PFC_PIN_GROUP(fsia_data_out_1), + SH_PFC_PIN_GROUP(fsia_data_out_2), + SH_PFC_PIN_GROUP(fsia_spdif_0), + SH_PFC_PIN_GROUP(fsia_spdif_1), + SH_PFC_PIN_GROUP(fsib_mclk_in), + SH_PFC_PIN_GROUP(gether_rmii), + SH_PFC_PIN_GROUP(gether_mii), + SH_PFC_PIN_GROUP(gether_gmii), + SH_PFC_PIN_GROUP(gether_int), + SH_PFC_PIN_GROUP(gether_link), + SH_PFC_PIN_GROUP(gether_wol), + SH_PFC_PIN_GROUP(hdmi), + SH_PFC_PIN_GROUP(intc_irq0_0), + SH_PFC_PIN_GROUP(intc_irq0_1), + SH_PFC_PIN_GROUP(intc_irq1), + SH_PFC_PIN_GROUP(intc_irq2_0), + SH_PFC_PIN_GROUP(intc_irq2_1), + SH_PFC_PIN_GROUP(intc_irq3_0), + SH_PFC_PIN_GROUP(intc_irq3_1), + SH_PFC_PIN_GROUP(intc_irq4_0), + SH_PFC_PIN_GROUP(intc_irq4_1), + SH_PFC_PIN_GROUP(intc_irq5_0), + SH_PFC_PIN_GROUP(intc_irq5_1), + SH_PFC_PIN_GROUP(intc_irq6_0), + SH_PFC_PIN_GROUP(intc_irq6_1), + SH_PFC_PIN_GROUP(intc_irq7_0), + SH_PFC_PIN_GROUP(intc_irq7_1), + SH_PFC_PIN_GROUP(intc_irq8), + SH_PFC_PIN_GROUP(intc_irq9_0), + SH_PFC_PIN_GROUP(intc_irq9_1), + SH_PFC_PIN_GROUP(intc_irq10), + SH_PFC_PIN_GROUP(intc_irq11), + SH_PFC_PIN_GROUP(intc_irq12_0), + SH_PFC_PIN_GROUP(intc_irq12_1), + SH_PFC_PIN_GROUP(intc_irq13_0), + SH_PFC_PIN_GROUP(intc_irq13_1), + SH_PFC_PIN_GROUP(intc_irq14_0), + SH_PFC_PIN_GROUP(intc_irq14_1), + SH_PFC_PIN_GROUP(intc_irq15_0), + SH_PFC_PIN_GROUP(intc_irq15_1), + SH_PFC_PIN_GROUP(intc_irq16_0), + SH_PFC_PIN_GROUP(intc_irq16_1), + SH_PFC_PIN_GROUP(intc_irq17), + SH_PFC_PIN_GROUP(intc_irq18), + SH_PFC_PIN_GROUP(intc_irq19), + SH_PFC_PIN_GROUP(intc_irq20), + SH_PFC_PIN_GROUP(intc_irq21), + SH_PFC_PIN_GROUP(intc_irq22), + SH_PFC_PIN_GROUP(intc_irq23), + SH_PFC_PIN_GROUP(intc_irq24), + SH_PFC_PIN_GROUP(intc_irq25), + SH_PFC_PIN_GROUP(intc_irq26_0), + SH_PFC_PIN_GROUP(intc_irq26_1), + SH_PFC_PIN_GROUP(intc_irq27_0), + SH_PFC_PIN_GROUP(intc_irq27_1), + SH_PFC_PIN_GROUP(intc_irq28_0), + SH_PFC_PIN_GROUP(intc_irq28_1), + SH_PFC_PIN_GROUP(intc_irq29_0), + SH_PFC_PIN_GROUP(intc_irq29_1), + SH_PFC_PIN_GROUP(intc_irq30_0), + SH_PFC_PIN_GROUP(intc_irq30_1), + SH_PFC_PIN_GROUP(intc_irq31_0), + SH_PFC_PIN_GROUP(intc_irq31_1), SH_PFC_PIN_GROUP(lcd0_data8), SH_PFC_PIN_GROUP(lcd0_data9), SH_PFC_PIN_GROUP(lcd0_data12), @@ -2084,6 +2910,41 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(mmc0_data4_1), SH_PFC_PIN_GROUP(mmc0_data8_1), SH_PFC_PIN_GROUP(mmc0_ctrl_1), + SH_PFC_PIN_GROUP(scifa0_data), + SH_PFC_PIN_GROUP(scifa0_clk), + SH_PFC_PIN_GROUP(scifa0_ctrl), + SH_PFC_PIN_GROUP(scifa1_data), + SH_PFC_PIN_GROUP(scifa1_clk), + SH_PFC_PIN_GROUP(scifa1_ctrl), + SH_PFC_PIN_GROUP(scifa2_data), + SH_PFC_PIN_GROUP(scifa2_clk_0), + SH_PFC_PIN_GROUP(scifa2_clk_1), + SH_PFC_PIN_GROUP(scifa2_ctrl), + SH_PFC_PIN_GROUP(scifa3_data_0), + SH_PFC_PIN_GROUP(scifa3_clk_0), + SH_PFC_PIN_GROUP(scifa3_ctrl_0), + SH_PFC_PIN_GROUP(scifa3_data_1), + SH_PFC_PIN_GROUP(scifa3_clk_1), + SH_PFC_PIN_GROUP(scifa3_ctrl_1), + SH_PFC_PIN_GROUP(scifa4_data_0), + SH_PFC_PIN_GROUP(scifa4_data_1), + SH_PFC_PIN_GROUP(scifa4_data_2), + SH_PFC_PIN_GROUP(scifa4_clk_0), + SH_PFC_PIN_GROUP(scifa4_clk_1), + SH_PFC_PIN_GROUP(scifa5_data_0), + SH_PFC_PIN_GROUP(scifa5_data_1), + SH_PFC_PIN_GROUP(scifa5_data_2), + SH_PFC_PIN_GROUP(scifa5_clk_0), + SH_PFC_PIN_GROUP(scifa5_clk_1), + SH_PFC_PIN_GROUP(scifa6_data), + SH_PFC_PIN_GROUP(scifa6_clk), + SH_PFC_PIN_GROUP(scifa7_data), + SH_PFC_PIN_GROUP(scifb_data_0), + SH_PFC_PIN_GROUP(scifb_clk_0), + SH_PFC_PIN_GROUP(scifb_ctrl_0), + SH_PFC_PIN_GROUP(scifb_data_1), + SH_PFC_PIN_GROUP(scifb_clk_1), + SH_PFC_PIN_GROUP(scifb_ctrl_1), SH_PFC_PIN_GROUP(sdhi0_data1), SH_PFC_PIN_GROUP(sdhi0_data4), SH_PFC_PIN_GROUP(sdhi0_ctrl), @@ -2101,6 +2962,132 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(sdhi2_wp_0), SH_PFC_PIN_GROUP(sdhi2_cd_1), SH_PFC_PIN_GROUP(sdhi2_wp_1), + SH_PFC_PIN_GROUP(tpu0_to0), + SH_PFC_PIN_GROUP(tpu0_to1), + SH_PFC_PIN_GROUP(tpu0_to2_0), + SH_PFC_PIN_GROUP(tpu0_to2_1), + SH_PFC_PIN_GROUP(tpu0_to3), +}; + +static const char * const bsc_groups[] = { + "bsc_data8", + "bsc_data16", + "bsc_data32", + "bsc_cs0", + "bsc_cs2", + "bsc_cs4", + "bsc_cs5a_0", + "bsc_cs5a_1", + "bsc_cs5b", + "bsc_cs6a", + "bsc_rd_we8", + "bsc_rd_we16", + "bsc_rd_we32", + "bsc_bs", + "bsc_rdwr", +}; + +static const char * const ceu0_groups[] = { + "ceu0_data_0_7", + "ceu0_data_8_15_0", + "ceu0_data_8_15_1", + "ceu0_clk_0", + "ceu0_clk_1", + "ceu0_clk_2", + "ceu0_sync", + "ceu0_field", +}; + +static const char * const ceu1_groups[] = { + "ceu1_data", + "ceu1_clk", + "ceu1_sync", + "ceu1_field", +}; + +static const char * const fsia_groups[] = { + "fsia_mclk_in", + "fsia_mclk_out", + "fsia_sclk_in", + "fsia_sclk_out", + "fsia_data_in_0", + "fsia_data_in_1", + "fsia_data_out_0", + "fsia_data_out_1", + "fsia_data_out_2", + "fsia_spdif_0", + "fsia_spdif_1", +}; + +static const char * const fsib_groups[] = { + "fsib_mclk_in", +}; + +static const char * const gether_groups[] = { + "gether_rmii", + "gether_mii", + "gether_gmii", + "gether_int", + "gether_link", + "gether_wol", +}; + +static const char * const hdmi_groups[] = { + "hdmi", +}; + +static const char * const intc_groups[] = { + "intc_irq0_0", + "intc_irq0_1", + "intc_irq1", + "intc_irq2_0", + "intc_irq2_1", + "intc_irq3_0", + "intc_irq3_1", + "intc_irq4_0", + "intc_irq4_1", + "intc_irq5_0", + "intc_irq5_1", + "intc_irq6_0", + "intc_irq6_1", + "intc_irq7_0", + "intc_irq7_1", + "intc_irq8", + "intc_irq9_0", + "intc_irq9_1", + "intc_irq10", + "intc_irq11", + "intc_irq12_0", + "intc_irq12_1", + "intc_irq13_0", + "intc_irq13_1", + "intc_irq14_0", + "intc_irq14_1", + "intc_irq15_0", + "intc_irq15_1", + "intc_irq16_0", + "intc_irq16_1", + "intc_irq17", + "intc_irq18", + "intc_irq19", + "intc_irq20", + "intc_irq21", + "intc_irq22", + "intc_irq23", + "intc_irq24", + "intc_irq25", + "intc_irq26_0", + "intc_irq26_1", + "intc_irq27_0", + "intc_irq27_1", + "intc_irq28_0", + "intc_irq28_1", + "intc_irq29_0", + "intc_irq29_1", + "intc_irq30_0", + "intc_irq30_1", + "intc_irq31_0", + "intc_irq31_1", }; static const char * const lcd0_groups[] = { @@ -2142,6 +3129,68 @@ static const char * const mmc0_groups[] = { "mmc0_ctrl_1", }; +static const char * const scifa0_groups[] = { + "scifa0_data", + "scifa0_clk", + "scifa0_ctrl", +}; + +static const char * const scifa1_groups[] = { + "scifa1_data", + "scifa1_clk", + "scifa1_ctrl", +}; + +static const char * const scifa2_groups[] = { + "scifa2_data", + "scifa2_clk_0", + "scifa2_clk_1", + "scifa2_ctrl", +}; + +static const char * const scifa3_groups[] = { + "scifa3_data_0", + "scifa3_clk_0", + "scifa3_ctrl_0", + "scifa3_data_1", + "scifa3_clk_1", + "scifa3_ctrl_1", +}; + +static const char * const scifa4_groups[] = { + "scifa4_data_0", + "scifa4_data_1", + "scifa4_data_2", + "scifa4_clk_0", + "scifa4_clk_1", +}; + +static const char * const scifa5_groups[] = { + "scifa5_data_0", + "scifa5_data_1", + "scifa5_data_2", + "scifa5_clk_0", + "scifa5_clk_1", +}; + +static const char * const scifa6_groups[] = { + "scifa6_data", + "scifa6_clk", +}; + +static const char * const scifa7_groups[] = { + "scifa7_data", +}; + +static const char * const scifb_groups[] = { + "scifb_data_0", + "scifb_clk_0", + "scifb_ctrl_0", + "scifb_data_1", + "scifb_clk_1", + "scifb_ctrl_1", +}; + static const char * const sdhi0_groups[] = { "sdhi0_data1", "sdhi0_data4", @@ -2168,412 +3217,51 @@ static const char * const sdhi2_groups[] = { "sdhi2_wp_1", }; +static const char * const tpu0_groups[] = { + "tpu0_to0", + "tpu0_to1", + "tpu0_to2_0", + "tpu0_to2_1", + "tpu0_to3", +}; + static const struct sh_pfc_function pinmux_functions[] = { + SH_PFC_FUNCTION(bsc), + SH_PFC_FUNCTION(ceu0), + SH_PFC_FUNCTION(ceu1), + SH_PFC_FUNCTION(fsia), + SH_PFC_FUNCTION(fsib), + SH_PFC_FUNCTION(gether), + SH_PFC_FUNCTION(hdmi), + SH_PFC_FUNCTION(intc), SH_PFC_FUNCTION(lcd0), SH_PFC_FUNCTION(lcd1), SH_PFC_FUNCTION(mmc0), + SH_PFC_FUNCTION(scifa0), + SH_PFC_FUNCTION(scifa1), + SH_PFC_FUNCTION(scifa2), + SH_PFC_FUNCTION(scifa3), + SH_PFC_FUNCTION(scifa4), + SH_PFC_FUNCTION(scifa5), + SH_PFC_FUNCTION(scifa6), + SH_PFC_FUNCTION(scifa7), + SH_PFC_FUNCTION(scifb), SH_PFC_FUNCTION(sdhi0), SH_PFC_FUNCTION(sdhi1), SH_PFC_FUNCTION(sdhi2), + SH_PFC_FUNCTION(tpu0), }; -#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins) - -static const struct pinmux_func pinmux_func_gpios[] = { - /* IRQ */ - GPIO_FN(IRQ0_PORT2), GPIO_FN(IRQ0_PORT13), - GPIO_FN(IRQ1), - GPIO_FN(IRQ2_PORT11), GPIO_FN(IRQ2_PORT12), - GPIO_FN(IRQ3_PORT10), GPIO_FN(IRQ3_PORT14), - GPIO_FN(IRQ4_PORT15), GPIO_FN(IRQ4_PORT172), - GPIO_FN(IRQ5_PORT0), GPIO_FN(IRQ5_PORT1), - GPIO_FN(IRQ6_PORT121), GPIO_FN(IRQ6_PORT173), - GPIO_FN(IRQ7_PORT120), GPIO_FN(IRQ7_PORT209), - GPIO_FN(IRQ8), - GPIO_FN(IRQ9_PORT118), GPIO_FN(IRQ9_PORT210), - GPIO_FN(IRQ10), - GPIO_FN(IRQ11), - GPIO_FN(IRQ12_PORT42), GPIO_FN(IRQ12_PORT97), - GPIO_FN(IRQ13_PORT64), GPIO_FN(IRQ13_PORT98), - GPIO_FN(IRQ14_PORT63), GPIO_FN(IRQ14_PORT99), - GPIO_FN(IRQ15_PORT62), GPIO_FN(IRQ15_PORT100), - GPIO_FN(IRQ16_PORT68), GPIO_FN(IRQ16_PORT211), - GPIO_FN(IRQ17), - GPIO_FN(IRQ18), - GPIO_FN(IRQ19), - GPIO_FN(IRQ20), - GPIO_FN(IRQ21), - GPIO_FN(IRQ22), - GPIO_FN(IRQ23), - GPIO_FN(IRQ24), - GPIO_FN(IRQ25), - GPIO_FN(IRQ26_PORT58), GPIO_FN(IRQ26_PORT81), - GPIO_FN(IRQ27_PORT57), GPIO_FN(IRQ27_PORT168), - GPIO_FN(IRQ28_PORT56), GPIO_FN(IRQ28_PORT169), - GPIO_FN(IRQ29_PORT50), GPIO_FN(IRQ29_PORT170), - GPIO_FN(IRQ30_PORT49), GPIO_FN(IRQ30_PORT171), - GPIO_FN(IRQ31_PORT41), GPIO_FN(IRQ31_PORT167), - - /* Function */ - - /* DBGT */ - GPIO_FN(DBGMDT2), GPIO_FN(DBGMDT1), GPIO_FN(DBGMDT0), - GPIO_FN(DBGMD10), GPIO_FN(DBGMD11), GPIO_FN(DBGMD20), - GPIO_FN(DBGMD21), - - /* FSI-A */ - GPIO_FN(FSIAISLD_PORT0), /* FSIAISLD Port 0/5 */ - GPIO_FN(FSIAISLD_PORT5), - GPIO_FN(FSIASPDIF_PORT9), /* FSIASPDIF Port 9/18 */ - GPIO_FN(FSIASPDIF_PORT18), - GPIO_FN(FSIAOSLD1), GPIO_FN(FSIAOSLD2), GPIO_FN(FSIAOLR), - GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), GPIO_FN(FSIAOMC), - GPIO_FN(FSIACK), GPIO_FN(FSIAILR), GPIO_FN(FSIAIBT), - - /* FSI-B */ - GPIO_FN(FSIBCK), - - /* FMSI */ - GPIO_FN(FMSISLD_PORT1), /* FMSISLD Port 1/6 */ - GPIO_FN(FMSISLD_PORT6), - GPIO_FN(FMSIILR), GPIO_FN(FMSIIBT), GPIO_FN(FMSIOLR), - GPIO_FN(FMSIOBT), GPIO_FN(FMSICK), GPIO_FN(FMSOILR), - GPIO_FN(FMSOIBT), GPIO_FN(FMSOOLR), GPIO_FN(FMSOOBT), - GPIO_FN(FMSOSLD), GPIO_FN(FMSOCK), - - /* SCIFA0 */ - GPIO_FN(SCIFA0_SCK), GPIO_FN(SCIFA0_CTS), GPIO_FN(SCIFA0_RTS), - GPIO_FN(SCIFA0_RXD), GPIO_FN(SCIFA0_TXD), - - /* SCIFA1 */ - GPIO_FN(SCIFA1_CTS), GPIO_FN(SCIFA1_SCK), - GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_TXD), GPIO_FN(SCIFA1_RTS), - - /* SCIFA2 */ - GPIO_FN(SCIFA2_SCK_PORT22), /* SCIFA2_SCK Port 22/199 */ - GPIO_FN(SCIFA2_SCK_PORT199), - GPIO_FN(SCIFA2_RXD), GPIO_FN(SCIFA2_TXD), - GPIO_FN(SCIFA2_CTS), GPIO_FN(SCIFA2_RTS), - - /* SCIFA3 */ - GPIO_FN(SCIFA3_RTS_PORT105), /* MSEL5CR_8_0 */ - GPIO_FN(SCIFA3_SCK_PORT116), - GPIO_FN(SCIFA3_CTS_PORT117), - GPIO_FN(SCIFA3_RXD_PORT174), - GPIO_FN(SCIFA3_TXD_PORT175), - - GPIO_FN(SCIFA3_RTS_PORT161), /* MSEL5CR_8_1 */ - GPIO_FN(SCIFA3_SCK_PORT158), - GPIO_FN(SCIFA3_CTS_PORT162), - GPIO_FN(SCIFA3_RXD_PORT159), - GPIO_FN(SCIFA3_TXD_PORT160), - - /* SCIFA4 */ - GPIO_FN(SCIFA4_RXD_PORT12), /* MSEL5CR[12:11] = 00 */ - GPIO_FN(SCIFA4_TXD_PORT13), - - GPIO_FN(SCIFA4_RXD_PORT204), /* MSEL5CR[12:11] = 01 */ - GPIO_FN(SCIFA4_TXD_PORT203), - - GPIO_FN(SCIFA4_RXD_PORT94), /* MSEL5CR[12:11] = 10 */ - GPIO_FN(SCIFA4_TXD_PORT93), - - GPIO_FN(SCIFA4_SCK_PORT21), /* SCIFA4_SCK Port 21/205 */ - GPIO_FN(SCIFA4_SCK_PORT205), - - /* SCIFA5 */ - GPIO_FN(SCIFA5_TXD_PORT20), /* MSEL5CR[15:14] = 00 */ - GPIO_FN(SCIFA5_RXD_PORT10), - - GPIO_FN(SCIFA5_RXD_PORT207), /* MSEL5CR[15:14] = 01 */ - GPIO_FN(SCIFA5_TXD_PORT208), - - GPIO_FN(SCIFA5_TXD_PORT91), /* MSEL5CR[15:14] = 10 */ - GPIO_FN(SCIFA5_RXD_PORT92), - - GPIO_FN(SCIFA5_SCK_PORT23), /* SCIFA5_SCK Port 23/206 */ - GPIO_FN(SCIFA5_SCK_PORT206), - - /* SCIFA6 */ - GPIO_FN(SCIFA6_SCK), GPIO_FN(SCIFA6_RXD), GPIO_FN(SCIFA6_TXD), - - /* SCIFA7 */ - GPIO_FN(SCIFA7_TXD), GPIO_FN(SCIFA7_RXD), - - /* SCIFAB */ - GPIO_FN(SCIFB_SCK_PORT190), /* MSEL5CR_17_0 */ - GPIO_FN(SCIFB_RXD_PORT191), - GPIO_FN(SCIFB_TXD_PORT192), - GPIO_FN(SCIFB_RTS_PORT186), - GPIO_FN(SCIFB_CTS_PORT187), - - GPIO_FN(SCIFB_SCK_PORT2), /* MSEL5CR_17_1 */ - GPIO_FN(SCIFB_RXD_PORT3), - GPIO_FN(SCIFB_TXD_PORT4), - GPIO_FN(SCIFB_RTS_PORT172), - GPIO_FN(SCIFB_CTS_PORT173), - - /* RSPI */ - GPIO_FN(RSPI_SSL0_A), GPIO_FN(RSPI_SSL1_A), GPIO_FN(RSPI_SSL2_A), - GPIO_FN(RSPI_SSL3_A), GPIO_FN(RSPI_CK_A), GPIO_FN(RSPI_MOSI_A), - GPIO_FN(RSPI_MISO_A), - - /* VIO CKO */ - GPIO_FN(VIO_CKO1), - GPIO_FN(VIO_CKO2), - GPIO_FN(VIO_CKO_1), - GPIO_FN(VIO_CKO), - - /* VIO0 */ - GPIO_FN(VIO0_D0), GPIO_FN(VIO0_D1), GPIO_FN(VIO0_D2), - GPIO_FN(VIO0_D3), GPIO_FN(VIO0_D4), GPIO_FN(VIO0_D5), - GPIO_FN(VIO0_D6), GPIO_FN(VIO0_D7), GPIO_FN(VIO0_D8), - GPIO_FN(VIO0_D9), GPIO_FN(VIO0_D10), GPIO_FN(VIO0_D11), - GPIO_FN(VIO0_D12), GPIO_FN(VIO0_VD), GPIO_FN(VIO0_HD), - GPIO_FN(VIO0_CLK), GPIO_FN(VIO0_FIELD), - - GPIO_FN(VIO0_D13_PORT26), /* MSEL5CR_27_0 */ - GPIO_FN(VIO0_D14_PORT25), - GPIO_FN(VIO0_D15_PORT24), - - GPIO_FN(VIO0_D13_PORT22), /* MSEL5CR_27_1 */ - GPIO_FN(VIO0_D14_PORT95), - GPIO_FN(VIO0_D15_PORT96), - - /* VIO1 */ - GPIO_FN(VIO1_D0), GPIO_FN(VIO1_D1), GPIO_FN(VIO1_D2), - GPIO_FN(VIO1_D3), GPIO_FN(VIO1_D4), GPIO_FN(VIO1_D5), - GPIO_FN(VIO1_D6), GPIO_FN(VIO1_D7), GPIO_FN(VIO1_VD), - GPIO_FN(VIO1_HD), GPIO_FN(VIO1_CLK), GPIO_FN(VIO1_FIELD), - - /* TPU0 */ - GPIO_FN(TPU0TO0), GPIO_FN(TPU0TO1), GPIO_FN(TPU0TO3), - GPIO_FN(TPU0TO2_PORT66), /* TPU0TO2 Port 66/202 */ - GPIO_FN(TPU0TO2_PORT202), - - /* SSP1 0 */ - GPIO_FN(STP0_IPD0), GPIO_FN(STP0_IPD1), GPIO_FN(STP0_IPD2), - GPIO_FN(STP0_IPD3), GPIO_FN(STP0_IPD4), GPIO_FN(STP0_IPD5), - GPIO_FN(STP0_IPD6), GPIO_FN(STP0_IPD7), GPIO_FN(STP0_IPEN), - GPIO_FN(STP0_IPCLK), GPIO_FN(STP0_IPSYNC), - - /* SSP1 1 */ - GPIO_FN(STP1_IPD1), GPIO_FN(STP1_IPD2), GPIO_FN(STP1_IPD3), - GPIO_FN(STP1_IPD4), GPIO_FN(STP1_IPD5), GPIO_FN(STP1_IPD6), - GPIO_FN(STP1_IPD7), GPIO_FN(STP1_IPCLK), GPIO_FN(STP1_IPSYNC), - - GPIO_FN(STP1_IPD0_PORT186), /* MSEL5CR_23_0 */ - GPIO_FN(STP1_IPEN_PORT187), - - GPIO_FN(STP1_IPD0_PORT194), /* MSEL5CR_23_1 */ - GPIO_FN(STP1_IPEN_PORT193), - - /* SIM */ - GPIO_FN(SIM_RST), GPIO_FN(SIM_CLK), - GPIO_FN(SIM_D_PORT22), /* SIM_D Port 22/199 */ - GPIO_FN(SIM_D_PORT199), - - /* MSIOF2 */ - GPIO_FN(MSIOF2_TXD), GPIO_FN(MSIOF2_RXD), GPIO_FN(MSIOF2_TSCK), - GPIO_FN(MSIOF2_SS2), GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_SS1), - GPIO_FN(MSIOF2_MCK1), GPIO_FN(MSIOF2_MCK0), GPIO_FN(MSIOF2_RSYNC), - GPIO_FN(MSIOF2_RSCK), - - /* KEYSC */ - GPIO_FN(KEYIN4), GPIO_FN(KEYIN5), - GPIO_FN(KEYIN6), GPIO_FN(KEYIN7), - GPIO_FN(KEYOUT0), GPIO_FN(KEYOUT1), GPIO_FN(KEYOUT2), - GPIO_FN(KEYOUT3), GPIO_FN(KEYOUT4), GPIO_FN(KEYOUT5), - GPIO_FN(KEYOUT6), GPIO_FN(KEYOUT7), - - GPIO_FN(KEYIN0_PORT43), /* MSEL4CR_18_0 */ - GPIO_FN(KEYIN1_PORT44), - GPIO_FN(KEYIN2_PORT45), - GPIO_FN(KEYIN3_PORT46), - - GPIO_FN(KEYIN0_PORT58), /* MSEL4CR_18_1 */ - GPIO_FN(KEYIN1_PORT57), - GPIO_FN(KEYIN2_PORT56), - GPIO_FN(KEYIN3_PORT55), - - /* VOU */ - GPIO_FN(DV_D0), GPIO_FN(DV_D1), GPIO_FN(DV_D2), - GPIO_FN(DV_D3), GPIO_FN(DV_D4), GPIO_FN(DV_D5), - GPIO_FN(DV_D6), GPIO_FN(DV_D7), GPIO_FN(DV_D8), - GPIO_FN(DV_D9), GPIO_FN(DV_D10), GPIO_FN(DV_D11), - GPIO_FN(DV_D12), GPIO_FN(DV_D13), GPIO_FN(DV_D14), - GPIO_FN(DV_D15), GPIO_FN(DV_CLK), - GPIO_FN(DV_VSYNC), GPIO_FN(DV_HSYNC), - - /* MEMC */ - GPIO_FN(MEMC_AD0), GPIO_FN(MEMC_AD1), GPIO_FN(MEMC_AD2), - GPIO_FN(MEMC_AD3), GPIO_FN(MEMC_AD4), GPIO_FN(MEMC_AD5), - GPIO_FN(MEMC_AD6), GPIO_FN(MEMC_AD7), GPIO_FN(MEMC_AD8), - GPIO_FN(MEMC_AD9), GPIO_FN(MEMC_AD10), GPIO_FN(MEMC_AD11), - GPIO_FN(MEMC_AD12), GPIO_FN(MEMC_AD13), GPIO_FN(MEMC_AD14), - GPIO_FN(MEMC_AD15), GPIO_FN(MEMC_CS0), GPIO_FN(MEMC_INT), - GPIO_FN(MEMC_NWE), GPIO_FN(MEMC_NOE), GPIO_FN(MEMC_CS1), - GPIO_FN(MEMC_A1), GPIO_FN(MEMC_ADV), GPIO_FN(MEMC_DREQ0), - GPIO_FN(MEMC_WAIT), GPIO_FN(MEMC_DREQ1), GPIO_FN(MEMC_BUSCLK), - GPIO_FN(MEMC_A0), - - /* MSIOF0 */ - GPIO_FN(MSIOF0_SS1), GPIO_FN(MSIOF0_SS2), GPIO_FN(MSIOF0_RXD), - GPIO_FN(MSIOF0_TXD), GPIO_FN(MSIOF0_MCK0), GPIO_FN(MSIOF0_MCK1), - GPIO_FN(MSIOF0_RSYNC), GPIO_FN(MSIOF0_RSCK), GPIO_FN(MSIOF0_TSCK), - GPIO_FN(MSIOF0_TSYNC), - - /* MSIOF1 */ - GPIO_FN(MSIOF1_RSCK), GPIO_FN(MSIOF1_RSYNC), - GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1), - - GPIO_FN(MSIOF1_SS2_PORT116), GPIO_FN(MSIOF1_SS1_PORT117), - GPIO_FN(MSIOF1_RXD_PORT118), GPIO_FN(MSIOF1_TXD_PORT119), - GPIO_FN(MSIOF1_TSYNC_PORT120), - GPIO_FN(MSIOF1_TSCK_PORT121), /* MSEL4CR_10_0 */ - - GPIO_FN(MSIOF1_SS1_PORT67), GPIO_FN(MSIOF1_TSCK_PORT72), - GPIO_FN(MSIOF1_TSYNC_PORT73), GPIO_FN(MSIOF1_TXD_PORT74), - GPIO_FN(MSIOF1_RXD_PORT75), - GPIO_FN(MSIOF1_SS2_PORT202), /* MSEL4CR_10_1 */ - - /* GPIO */ - GPIO_FN(GPO0), GPIO_FN(GPI0), - GPIO_FN(GPO1), GPIO_FN(GPI1), - - /* USB0 */ - GPIO_FN(USB0_OCI), GPIO_FN(USB0_PPON), GPIO_FN(VBUS), - - /* USB1 */ - GPIO_FN(USB1_OCI), GPIO_FN(USB1_PPON), - - /* BBIF1 */ - GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_TSYNC), - GPIO_FN(BBIF1_TSCK), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC), - GPIO_FN(BBIF1_FLOW), GPIO_FN(BBIF1_RX_FLOW_N), - - /* BBIF2 */ - GPIO_FN(BBIF2_TXD2_PORT5), /* MSEL5CR_0_0 */ - GPIO_FN(BBIF2_RXD2_PORT60), - GPIO_FN(BBIF2_TSYNC2_PORT6), - GPIO_FN(BBIF2_TSCK2_PORT59), - - GPIO_FN(BBIF2_RXD2_PORT90), /* MSEL5CR_0_1 */ - GPIO_FN(BBIF2_TXD2_PORT183), - GPIO_FN(BBIF2_TSCK2_PORT89), - GPIO_FN(BBIF2_TSYNC2_PORT184), - - /* BSC / FLCTL / PCMCIA */ - GPIO_FN(CS0), GPIO_FN(CS2), GPIO_FN(CS4), - GPIO_FN(CS5B), GPIO_FN(CS6A), - GPIO_FN(CS5A_PORT105), /* CS5A PORT 19/105 */ - GPIO_FN(CS5A_PORT19), - GPIO_FN(IOIS16), /* ? */ - - GPIO_FN(A0), GPIO_FN(A1), GPIO_FN(A2), GPIO_FN(A3), - GPIO_FN(A4_FOE), GPIO_FN(A5_FCDE), /* share with FLCTL */ - GPIO_FN(A6), GPIO_FN(A7), GPIO_FN(A8), GPIO_FN(A9), - GPIO_FN(A10), GPIO_FN(A11), GPIO_FN(A12), GPIO_FN(A13), - GPIO_FN(A14), GPIO_FN(A15), GPIO_FN(A16), GPIO_FN(A17), - GPIO_FN(A18), GPIO_FN(A19), GPIO_FN(A20), GPIO_FN(A21), - GPIO_FN(A22), GPIO_FN(A23), GPIO_FN(A24), GPIO_FN(A25), - GPIO_FN(A26), - - GPIO_FN(D0_NAF0), GPIO_FN(D1_NAF1), /* share with FLCTL */ - GPIO_FN(D2_NAF2), GPIO_FN(D3_NAF3), /* share with FLCTL */ - GPIO_FN(D4_NAF4), GPIO_FN(D5_NAF5), /* share with FLCTL */ - GPIO_FN(D6_NAF6), GPIO_FN(D7_NAF7), /* share with FLCTL */ - GPIO_FN(D8_NAF8), GPIO_FN(D9_NAF9), /* share with FLCTL */ - GPIO_FN(D10_NAF10), GPIO_FN(D11_NAF11), /* share with FLCTL */ - GPIO_FN(D12_NAF12), GPIO_FN(D13_NAF13), /* share with FLCTL */ - GPIO_FN(D14_NAF14), GPIO_FN(D15_NAF15), /* share with FLCTL */ - GPIO_FN(D16), GPIO_FN(D17), GPIO_FN(D18), GPIO_FN(D19), - GPIO_FN(D20), GPIO_FN(D21), GPIO_FN(D22), GPIO_FN(D23), - GPIO_FN(D24), GPIO_FN(D25), GPIO_FN(D26), GPIO_FN(D27), - GPIO_FN(D28), GPIO_FN(D29), GPIO_FN(D30), GPIO_FN(D31), - - GPIO_FN(WE0_FWE), /* share with FLCTL */ - GPIO_FN(WE1), - GPIO_FN(WE2_ICIORD), /* share with PCMCIA */ - GPIO_FN(WE3_ICIOWR), /* share with PCMCIA */ - GPIO_FN(CKO), GPIO_FN(BS), GPIO_FN(RDWR), - GPIO_FN(RD_FSC), /* share with FLCTL */ - GPIO_FN(WAIT_PORT177), /* WAIT Port 90/177 */ - GPIO_FN(WAIT_PORT90), - - GPIO_FN(FCE0), GPIO_FN(FCE1), GPIO_FN(FRB), /* FLCTL */ - - /* IRDA */ - GPIO_FN(IRDA_FIRSEL), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_OUT), - - /* ATAPI */ - GPIO_FN(IDE_D0), GPIO_FN(IDE_D1), GPIO_FN(IDE_D2), - GPIO_FN(IDE_D3), GPIO_FN(IDE_D4), GPIO_FN(IDE_D5), - GPIO_FN(IDE_D6), GPIO_FN(IDE_D7), GPIO_FN(IDE_D8), - GPIO_FN(IDE_D9), GPIO_FN(IDE_D10), GPIO_FN(IDE_D11), - GPIO_FN(IDE_D12), GPIO_FN(IDE_D13), GPIO_FN(IDE_D14), - GPIO_FN(IDE_D15), GPIO_FN(IDE_A0), GPIO_FN(IDE_A1), - GPIO_FN(IDE_A2), GPIO_FN(IDE_CS0), GPIO_FN(IDE_CS1), - GPIO_FN(IDE_IOWR), GPIO_FN(IDE_IORD), GPIO_FN(IDE_IORDY), - GPIO_FN(IDE_INT), GPIO_FN(IDE_RST), GPIO_FN(IDE_DIRECTION), - GPIO_FN(IDE_EXBUF_ENB), GPIO_FN(IDE_IODACK), GPIO_FN(IDE_IODREQ), - - /* RMII */ - GPIO_FN(RMII_CRS_DV), GPIO_FN(RMII_RX_ER), GPIO_FN(RMII_RXD0), - GPIO_FN(RMII_RXD1), GPIO_FN(RMII_TX_EN), GPIO_FN(RMII_TXD0), - GPIO_FN(RMII_MDC), GPIO_FN(RMII_TXD1), GPIO_FN(RMII_MDIO), - GPIO_FN(RMII_REF50CK), GPIO_FN(RMII_REF125CK), /* for GMII */ - - /* GEther */ - GPIO_FN(ET_TX_CLK), GPIO_FN(ET_TX_EN), GPIO_FN(ET_ETXD0), - GPIO_FN(ET_ETXD1), GPIO_FN(ET_ETXD2), GPIO_FN(ET_ETXD3), - GPIO_FN(ET_ETXD4), GPIO_FN(ET_ETXD5), /* for GEther */ - GPIO_FN(ET_ETXD6), GPIO_FN(ET_ETXD7), /* for GEther */ - GPIO_FN(ET_COL), GPIO_FN(ET_TX_ER), GPIO_FN(ET_RX_CLK), - GPIO_FN(ET_RX_DV), GPIO_FN(ET_ERXD0), GPIO_FN(ET_ERXD1), - GPIO_FN(ET_ERXD2), GPIO_FN(ET_ERXD3), - GPIO_FN(ET_ERXD4), GPIO_FN(ET_ERXD5), /* for GEther */ - GPIO_FN(ET_ERXD6), GPIO_FN(ET_ERXD7), /* for GEther */ - GPIO_FN(ET_RX_ER), GPIO_FN(ET_CRS), GPIO_FN(ET_MDC), - GPIO_FN(ET_MDIO), GPIO_FN(ET_LINK), GPIO_FN(ET_PHY_INT), - GPIO_FN(ET_WOL), GPIO_FN(ET_GTX_CLK), - - /* DMA0 */ - GPIO_FN(DREQ0), GPIO_FN(DACK0), - - /* DMA1 */ - GPIO_FN(DREQ1), GPIO_FN(DACK1), - - /* SYSC */ - GPIO_FN(RESETOUTS), - - /* IRREM */ - GPIO_FN(IROUT), - - /* LCDC */ - GPIO_FN(LCDC0_SELECT), - GPIO_FN(LCDC1_SELECT), - - /* SDENC */ - GPIO_FN(SDENC_CPG), - GPIO_FN(SDENC_DV_CLKI), - - /* HDMI */ - GPIO_FN(HDMI_HPD), - GPIO_FN(HDMI_CEC), - - /* SYSC */ - GPIO_FN(RESETP_PULLUP), - GPIO_FN(RESETP_PLAIN), - - /* DEBUG */ - GPIO_FN(EDEBGREQ_PULLDOWN), - GPIO_FN(EDEBGREQ_PULLUP), - - GPIO_FN(TRACEAUD_FROM_VIO), - GPIO_FN(TRACEAUD_FROM_LCDC0), - GPIO_FN(TRACEAUD_FROM_MEMC), -}; +#undef PORTCR +#define PORTCR(nr, reg) \ + { \ + PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \ + _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT), \ + PORT##nr##_FN0, PORT##nr##_FN1, \ + PORT##nr##_FN2, PORT##nr##_FN3, \ + PORT##nr##_FN4, PORT##nr##_FN5, \ + PORT##nr##_FN6, PORT##nr##_FN7 } \ + } static const struct pinmux_cfg_reg pinmux_config_regs[] = { PORTCR(0, 0xe6050000), /* PORT0CR */ @@ -2994,48 +3682,114 @@ static const struct pinmux_data_reg pinmux_data_regs[] = { }; static const struct pinmux_irq pinmux_irqs[] = { - PINMUX_IRQ(irq_pin(0), GPIO_PORT2, GPIO_PORT13), /* IRQ0A */ - PINMUX_IRQ(irq_pin(1), GPIO_PORT20), /* IRQ1A */ - PINMUX_IRQ(irq_pin(2), GPIO_PORT11, GPIO_PORT12), /* IRQ2A */ - PINMUX_IRQ(irq_pin(3), GPIO_PORT10, GPIO_PORT14), /* IRQ3A */ - PINMUX_IRQ(irq_pin(4), GPIO_PORT15, GPIO_PORT172),/* IRQ4A */ - PINMUX_IRQ(irq_pin(5), GPIO_PORT0, GPIO_PORT1), /* IRQ5A */ - PINMUX_IRQ(irq_pin(6), GPIO_PORT121, GPIO_PORT173),/* IRQ6A */ - PINMUX_IRQ(irq_pin(7), GPIO_PORT120, GPIO_PORT209),/* IRQ7A */ - PINMUX_IRQ(irq_pin(8), GPIO_PORT119), /* IRQ8A */ - PINMUX_IRQ(irq_pin(9), GPIO_PORT118, GPIO_PORT210),/* IRQ9A */ - PINMUX_IRQ(irq_pin(10), GPIO_PORT19), /* IRQ10A */ - PINMUX_IRQ(irq_pin(11), GPIO_PORT104), /* IRQ11A */ - PINMUX_IRQ(irq_pin(12), GPIO_PORT42, GPIO_PORT97), /* IRQ12A */ - PINMUX_IRQ(irq_pin(13), GPIO_PORT64, GPIO_PORT98), /* IRQ13A */ - PINMUX_IRQ(irq_pin(14), GPIO_PORT63, GPIO_PORT99), /* IRQ14A */ - PINMUX_IRQ(irq_pin(15), GPIO_PORT62, GPIO_PORT100),/* IRQ15A */ - PINMUX_IRQ(irq_pin(16), GPIO_PORT68, GPIO_PORT211),/* IRQ16A */ - PINMUX_IRQ(irq_pin(17), GPIO_PORT69), /* IRQ17A */ - PINMUX_IRQ(irq_pin(18), GPIO_PORT70), /* IRQ18A */ - PINMUX_IRQ(irq_pin(19), GPIO_PORT71), /* IRQ19A */ - PINMUX_IRQ(irq_pin(20), GPIO_PORT67), /* IRQ20A */ - PINMUX_IRQ(irq_pin(21), GPIO_PORT202), /* IRQ21A */ - PINMUX_IRQ(irq_pin(22), GPIO_PORT95), /* IRQ22A */ - PINMUX_IRQ(irq_pin(23), GPIO_PORT96), /* IRQ23A */ - PINMUX_IRQ(irq_pin(24), GPIO_PORT180), /* IRQ24A */ - PINMUX_IRQ(irq_pin(25), GPIO_PORT38), /* IRQ25A */ - PINMUX_IRQ(irq_pin(26), GPIO_PORT58, GPIO_PORT81), /* IRQ26A */ - PINMUX_IRQ(irq_pin(27), GPIO_PORT57, GPIO_PORT168),/* IRQ27A */ - PINMUX_IRQ(irq_pin(28), GPIO_PORT56, GPIO_PORT169),/* IRQ28A */ - PINMUX_IRQ(irq_pin(29), GPIO_PORT50, GPIO_PORT170),/* IRQ29A */ - PINMUX_IRQ(irq_pin(30), GPIO_PORT49, GPIO_PORT171),/* IRQ30A */ - PINMUX_IRQ(irq_pin(31), GPIO_PORT41, GPIO_PORT167),/* IRQ31A */ + PINMUX_IRQ(irq_pin(0), 2, 13), /* IRQ0A */ + PINMUX_IRQ(irq_pin(1), 20), /* IRQ1A */ + PINMUX_IRQ(irq_pin(2), 11, 12), /* IRQ2A */ + PINMUX_IRQ(irq_pin(3), 10, 14), /* IRQ3A */ + PINMUX_IRQ(irq_pin(4), 15, 172), /* IRQ4A */ + PINMUX_IRQ(irq_pin(5), 0, 1), /* IRQ5A */ + PINMUX_IRQ(irq_pin(6), 121, 173), /* IRQ6A */ + PINMUX_IRQ(irq_pin(7), 120, 209), /* IRQ7A */ + PINMUX_IRQ(irq_pin(8), 119), /* IRQ8A */ + PINMUX_IRQ(irq_pin(9), 118, 210), /* IRQ9A */ + PINMUX_IRQ(irq_pin(10), 19), /* IRQ10A */ + PINMUX_IRQ(irq_pin(11), 104), /* IRQ11A */ + PINMUX_IRQ(irq_pin(12), 42, 97), /* IRQ12A */ + PINMUX_IRQ(irq_pin(13), 64, 98), /* IRQ13A */ + PINMUX_IRQ(irq_pin(14), 63, 99), /* IRQ14A */ + PINMUX_IRQ(irq_pin(15), 62, 100), /* IRQ15A */ + PINMUX_IRQ(irq_pin(16), 68, 211), /* IRQ16A */ + PINMUX_IRQ(irq_pin(17), 69), /* IRQ17A */ + PINMUX_IRQ(irq_pin(18), 70), /* IRQ18A */ + PINMUX_IRQ(irq_pin(19), 71), /* IRQ19A */ + PINMUX_IRQ(irq_pin(20), 67), /* IRQ20A */ + PINMUX_IRQ(irq_pin(21), 202), /* IRQ21A */ + PINMUX_IRQ(irq_pin(22), 95), /* IRQ22A */ + PINMUX_IRQ(irq_pin(23), 96), /* IRQ23A */ + PINMUX_IRQ(irq_pin(24), 180), /* IRQ24A */ + PINMUX_IRQ(irq_pin(25), 38), /* IRQ25A */ + PINMUX_IRQ(irq_pin(26), 58, 81), /* IRQ26A */ + PINMUX_IRQ(irq_pin(27), 57, 168), /* IRQ27A */ + PINMUX_IRQ(irq_pin(28), 56, 169), /* IRQ28A */ + PINMUX_IRQ(irq_pin(29), 50, 170), /* IRQ29A */ + PINMUX_IRQ(irq_pin(30), 49, 171), /* IRQ30A */ + PINMUX_IRQ(irq_pin(31), 41, 167), /* IRQ31A */ +}; + +#define PORTnCR_PULMD_OFF (0 << 6) +#define PORTnCR_PULMD_DOWN (2 << 6) +#define PORTnCR_PULMD_UP (3 << 6) +#define PORTnCR_PULMD_MASK (3 << 6) + +struct r8a7740_portcr_group { + unsigned int end_pin; + unsigned int offset; +}; + +static const struct r8a7740_portcr_group r8a7740_portcr_offsets[] = { + { 83, 0x0000 }, { 114, 0x1000 }, { 209, 0x2000 }, { 211, 0x3000 }, +}; + +static void __iomem *r8a7740_pinmux_portcr(struct sh_pfc *pfc, unsigned int pin) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(r8a7740_portcr_offsets); ++i) { + const struct r8a7740_portcr_group *group = + &r8a7740_portcr_offsets[i]; + + if (i <= group->end_pin) + return pfc->window->virt + group->offset + pin; + } + + return NULL; +} + +static unsigned int r8a7740_pinmux_get_bias(struct sh_pfc *pfc, unsigned int pin) +{ + void __iomem *addr = r8a7740_pinmux_portcr(pfc, pin); + u32 value = ioread8(addr) & PORTnCR_PULMD_MASK; + + switch (value) { + case PORTnCR_PULMD_UP: + return PIN_CONFIG_BIAS_PULL_UP; + case PORTnCR_PULMD_DOWN: + return PIN_CONFIG_BIAS_PULL_DOWN; + case PORTnCR_PULMD_OFF: + default: + return PIN_CONFIG_BIAS_DISABLE; + } +} + +static void r8a7740_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin, + unsigned int bias) +{ + void __iomem *addr = r8a7740_pinmux_portcr(pfc, pin); + u32 value = ioread8(addr) & ~PORTnCR_PULMD_MASK; + + switch (bias) { + case PIN_CONFIG_BIAS_PULL_UP: + value |= PORTnCR_PULMD_UP; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + value |= PORTnCR_PULMD_DOWN; + break; + } + + iowrite8(value, addr); +} + +static const struct sh_pfc_soc_operations r8a7740_pinmux_ops = { + .get_bias = r8a7740_pinmux_get_bias, + .set_bias = r8a7740_pinmux_set_bias, }; const struct sh_pfc_soc_info r8a7740_pinmux_info = { .name = "r8a7740_pfc", + .ops = &r8a7740_pinmux_ops, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, - PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, - PINMUX_INPUT_PULLDOWN_END }, .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, .function = { PINMUX_FUNCTION_BEGIN, @@ -3048,9 +3802,6 @@ const struct sh_pfc_soc_info r8a7740_pinmux_info = { .functions = pinmux_functions, .nr_functions = ARRAY_SIZE(pinmux_functions), - .func_gpios = pinmux_func_gpios, - .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios), - .cfg_regs = pinmux_config_regs, .data_regs = pinmux_data_regs, diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c new file mode 100644 index 00000000000..1dcbabcd7b3 --- /dev/null +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c @@ -0,0 +1,2783 @@ +/* + * r8a7778 processor support - PFC hardware block + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * based on + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_data/gpio-rcar.h> +#include <linux/kernel.h> +#include "sh_pfc.h" + +#define PORT_GP_1(bank, pin, fn, sfx) fn(bank, pin, GP_##bank##_##pin, sfx) + +#define PORT_GP_32(bank, fn, sfx) \ + PORT_GP_1(bank, 0, fn, sfx), PORT_GP_1(bank, 1, fn, sfx), \ + PORT_GP_1(bank, 2, fn, sfx), PORT_GP_1(bank, 3, fn, sfx), \ + PORT_GP_1(bank, 4, fn, sfx), PORT_GP_1(bank, 5, fn, sfx), \ + PORT_GP_1(bank, 6, fn, sfx), PORT_GP_1(bank, 7, fn, sfx), \ + PORT_GP_1(bank, 8, fn, sfx), PORT_GP_1(bank, 9, fn, sfx), \ + PORT_GP_1(bank, 10, fn, sfx), PORT_GP_1(bank, 11, fn, sfx), \ + PORT_GP_1(bank, 12, fn, sfx), PORT_GP_1(bank, 13, fn, sfx), \ + PORT_GP_1(bank, 14, fn, sfx), PORT_GP_1(bank, 15, fn, sfx), \ + PORT_GP_1(bank, 16, fn, sfx), PORT_GP_1(bank, 17, fn, sfx), \ + PORT_GP_1(bank, 18, fn, sfx), PORT_GP_1(bank, 19, fn, sfx), \ + PORT_GP_1(bank, 20, fn, sfx), PORT_GP_1(bank, 21, fn, sfx), \ + PORT_GP_1(bank, 22, fn, sfx), PORT_GP_1(bank, 23, fn, sfx), \ + PORT_GP_1(bank, 24, fn, sfx), PORT_GP_1(bank, 25, fn, sfx), \ + PORT_GP_1(bank, 26, fn, sfx), PORT_GP_1(bank, 27, fn, sfx), \ + PORT_GP_1(bank, 28, fn, sfx), PORT_GP_1(bank, 29, fn, sfx), \ + PORT_GP_1(bank, 30, fn, sfx), PORT_GP_1(bank, 31, fn, sfx) + +#define PORT_GP_27(bank, fn, sfx) \ + PORT_GP_1(bank, 0, fn, sfx), PORT_GP_1(bank, 1, fn, sfx), \ + PORT_GP_1(bank, 2, fn, sfx), PORT_GP_1(bank, 3, fn, sfx), \ + PORT_GP_1(bank, 4, fn, sfx), PORT_GP_1(bank, 5, fn, sfx), \ + PORT_GP_1(bank, 6, fn, sfx), PORT_GP_1(bank, 7, fn, sfx), \ + PORT_GP_1(bank, 8, fn, sfx), PORT_GP_1(bank, 9, fn, sfx), \ + PORT_GP_1(bank, 10, fn, sfx), PORT_GP_1(bank, 11, fn, sfx), \ + PORT_GP_1(bank, 12, fn, sfx), PORT_GP_1(bank, 13, fn, sfx), \ + PORT_GP_1(bank, 14, fn, sfx), PORT_GP_1(bank, 15, fn, sfx), \ + PORT_GP_1(bank, 16, fn, sfx), PORT_GP_1(bank, 17, fn, sfx), \ + PORT_GP_1(bank, 18, fn, sfx), PORT_GP_1(bank, 19, fn, sfx), \ + PORT_GP_1(bank, 20, fn, sfx), PORT_GP_1(bank, 21, fn, sfx), \ + PORT_GP_1(bank, 22, fn, sfx), PORT_GP_1(bank, 23, fn, sfx), \ + PORT_GP_1(bank, 24, fn, sfx), PORT_GP_1(bank, 25, fn, sfx), \ + PORT_GP_1(bank, 26, fn, sfx) + +#define CPU_ALL_PORT(fn, sfx) \ + PORT_GP_32(0, fn, sfx), \ + PORT_GP_32(1, fn, sfx), \ + PORT_GP_32(2, fn, sfx), \ + PORT_GP_32(3, fn, sfx), \ + PORT_GP_27(4, fn, sfx) + +#define _GP_PORT_ALL(bank, pin, name, sfx) name##_##sfx + +#define _GP_GPIO(bank, pin, _name, sfx) \ + [RCAR_GP_PIN(bank, pin)] = { \ + .name = __stringify(_name), \ + .enum_id = _name##_DATA, \ + } + +#define _GP_DATA(bank, pin, name, sfx) \ + PINMUX_DATA(name##_DATA, name##_FN) + +#define GP_ALL(str) CPU_ALL_PORT(_GP_PORT_ALL, str) +#define PINMUX_GPIO_GP_ALL() CPU_ALL_PORT(_GP_GPIO, unused) +#define PINMUX_DATA_GP_ALL() CPU_ALL_PORT(_GP_DATA, unused) + +#define PINMUX_IPSR_NOGP(ispr, fn) PINMUX_DATA(fn##_MARK, FN_##fn) +#define PINMUX_IPSR_DATA(ipsr, fn) PINMUX_DATA(fn##_MARK, FN_##fn, FN_##ipsr) +#define PINMUX_IPSR_MSEL(ipsr, fn, ms) PINMUX_DATA(fn##_MARK, FN_##fn, FN_##ipsr, FN_##ms) +#define PINMUX_IPSR_NOGM(ispr, fn, ms) PINMUX_DATA(fn##_MARK, FN_##fn, FN_##ms) + +enum { + PINMUX_RESERVED = 0, + + PINMUX_DATA_BEGIN, + GP_ALL(DATA), /* GP_0_0_DATA -> GP_4_26_DATA */ + PINMUX_DATA_END, + + PINMUX_FUNCTION_BEGIN, + GP_ALL(FN), /* GP_0_0_FN -> GP_4_26_FN */ + + /* GPSR0 */ + FN_IP0_1_0, FN_PENC0, FN_PENC1, FN_IP0_4_2, + FN_IP0_7_5, FN_IP0_11_8, FN_IP0_14_12, FN_A1, + FN_A2, FN_A3, FN_IP0_15, FN_IP0_16, + FN_IP0_17, FN_IP0_18, FN_IP0_19, FN_IP0_20, + FN_IP0_21, FN_IP0_22, FN_IP0_23, FN_IP0_24, + FN_IP0_25, FN_IP0_26, FN_IP0_27, FN_IP0_28, + FN_IP0_29, FN_IP0_30, FN_IP1_0, FN_IP1_1, + FN_IP1_4_2, FN_IP1_7_5, FN_IP1_10_8, FN_IP1_14_11, + + /* GPSR1 */ + FN_IP1_23_21, FN_WE0, FN_IP1_24, FN_IP1_27_25, + FN_IP1_29_28, FN_IP2_2_0, FN_IP2_5_3, FN_IP2_8_6, + FN_IP2_11_9, FN_IP2_13_12, FN_IP2_16_14, FN_IP2_17, + FN_IP2_30, FN_IP2_31, FN_IP3_1_0, FN_IP3_4_2, + FN_IP3_7_5, FN_IP3_9_8, FN_IP3_12_10, FN_IP3_15_13, + FN_IP3_18_16, FN_IP3_20_19, FN_IP3_23_21, FN_IP3_26_24, + FN_IP3_27, FN_IP3_28, FN_IP3_29, FN_IP3_30, + FN_IP3_31, FN_IP4_0, FN_IP4_3_1, FN_IP4_6_4, + + /* GPSR2 */ + FN_IP4_7, FN_IP4_8, FN_IP4_10_9, FN_IP4_12_11, + FN_IP4_14_13, FN_IP4_16_15, FN_IP4_20_17, FN_IP4_24_21, + FN_IP4_26_25, FN_IP4_28_27, FN_IP4_30_29, FN_IP5_1_0, + FN_IP5_3_2, FN_IP5_5_4, FN_IP5_6, FN_IP5_7, + FN_IP5_9_8, FN_IP5_11_10, FN_IP5_12, FN_IP5_14_13, + FN_IP5_17_15, FN_IP5_20_18, FN_AUDIO_CLKA, FN_AUDIO_CLKB, + FN_IP5_22_21, FN_IP5_25_23, FN_IP5_28_26, FN_IP5_30_29, + FN_IP6_1_0, FN_IP6_4_2, FN_IP6_6_5, FN_IP6_7, + + /* GPSR3 */ + FN_IP6_8, FN_IP6_9, FN_SSI_SCK34, FN_IP6_10, + FN_IP6_12_11, FN_IP6_13, FN_IP6_15_14, FN_IP6_16, + FN_IP6_18_17, FN_IP6_20_19, FN_IP6_21, FN_IP6_23_22, + FN_IP6_25_24, FN_IP6_27_26, FN_IP6_29_28, FN_IP6_31_30, + FN_IP7_1_0, FN_IP7_3_2, FN_IP7_5_4, FN_IP7_8_6, + FN_IP7_11_9, FN_IP7_14_12, FN_IP7_17_15, FN_IP7_20_18, + FN_IP7_21, FN_IP7_24_22, FN_IP7_28_25, FN_IP7_31_29, + FN_IP8_2_0, FN_IP8_5_3, FN_IP8_8_6, FN_IP8_10_9, + + /* GPSR4 */ + FN_IP8_13_11, FN_IP8_15_14, FN_IP8_18_16, FN_IP8_21_19, + FN_IP8_23_22, FN_IP8_26_24, FN_IP8_29_27, FN_IP9_2_0, + FN_IP9_5_3, FN_IP9_8_6, FN_IP9_11_9, FN_IP9_14_12, + FN_IP9_17_15, FN_IP9_20_18, FN_IP9_23_21, FN_IP9_26_24, + FN_IP9_29_27, FN_IP10_2_0, FN_IP10_5_3, FN_IP10_8_6, + FN_IP10_12_9, FN_IP10_15_13, FN_IP10_18_16, FN_IP10_21_19, + FN_IP10_24_22, FN_AVS1, FN_AVS2, + + /* IPSR0 */ + FN_PRESETOUT, FN_PWM1, FN_AUDATA0, FN_ARM_TRACEDATA_0, + FN_GPSCLK_C, FN_USB_OVC0, FN_TX2_E, FN_SDA2_B, + FN_AUDATA1, FN_ARM_TRACEDATA_1, FN_GPSIN_C, + FN_USB_OVC1, FN_RX2_E, FN_SCL2_B, FN_SD1_DAT2_A, + FN_MMC_D2, FN_BS, FN_ATADIR0_A, FN_SDSELF_A, + FN_PWM4_B, FN_SD1_DAT3_A, FN_MMC_D3, FN_A0, + FN_ATAG0_A, FN_REMOCON_B, FN_A4, FN_A5, + FN_A6, FN_A7, FN_A8, FN_A9, + FN_A10, FN_A11, FN_A12, FN_A13, + FN_A14, FN_A15, FN_A16, FN_A17, + FN_A18, FN_A19, + + /* IPSR1 */ + FN_A20, FN_HSPI_CS1_B, FN_A21, FN_HSPI_CLK1_B, + FN_A22, FN_HRTS0_B, FN_RX2_B, FN_DREQ2_A, + FN_A23, FN_HTX0_B, FN_TX2_B, FN_DACK2_A, + FN_TS_SDEN0_A, FN_SD1_CD_A, FN_MMC_D6, FN_A24, + FN_DREQ1_A, FN_HRX0_B, FN_TS_SPSYNC0_A, + FN_SD1_WP_A, FN_MMC_D7, FN_A25, FN_DACK1_A, + FN_HCTS0_B, FN_RX3_C, FN_TS_SDAT0_A, FN_CLKOUT, + FN_HSPI_TX1_B, FN_PWM0_B, FN_CS0, FN_HSPI_RX1_B, + FN_SSI_SCK1_B, FN_ATAG0_B, FN_CS1_A26, FN_SDA2_A, + FN_SCK2_B, FN_MMC_D5, FN_ATADIR0_B, FN_RD_WR, + FN_WE1, FN_ATAWR0_B, FN_SSI_WS1_B, FN_EX_CS0, + FN_SCL2_A, FN_TX3_C, FN_TS_SCK0_A, FN_EX_CS1, + FN_MMC_D4, + + /* IPSR2 */ + FN_SD1_CLK_A, FN_MMC_CLK, FN_ATACS00, FN_EX_CS2, + FN_SD1_CMD_A, FN_MMC_CMD, FN_ATACS10, FN_EX_CS3, + FN_SD1_DAT0_A, FN_MMC_D0, FN_ATARD0, FN_EX_CS4, + FN_EX_WAIT1_A, FN_SD1_DAT1_A, FN_MMC_D1, FN_ATAWR0_A, + FN_EX_CS5, FN_EX_WAIT2_A, FN_DREQ0_A, FN_RX3_A, + FN_DACK0, FN_TX3_A, FN_DRACK0, FN_EX_WAIT0, + FN_PWM0_C, FN_D0, FN_D1, FN_D2, + FN_D3, FN_D4, FN_D5, FN_D6, + FN_D7, FN_D8, FN_D9, FN_D10, + FN_D11, FN_RD_WR_B, FN_IRQ0, FN_MLB_CLK, + FN_IRQ1_A, + + /* IPSR3 */ + FN_MLB_SIG, FN_RX5_B, FN_SDA3_A, FN_IRQ2_A, + FN_MLB_DAT, FN_TX5_B, FN_SCL3_A, FN_IRQ3_A, + FN_SDSELF_B, FN_SD1_CMD_B, FN_SCIF_CLK, FN_AUDIO_CLKOUT_B, + FN_CAN_CLK_B, FN_SDA3_B, FN_SD1_CLK_B, FN_HTX0_A, + FN_TX0_A, FN_SD1_DAT0_B, FN_HRX0_A, FN_RX0_A, + FN_SD1_DAT1_B, FN_HSCK0, FN_SCK0, FN_SCL3_B, + FN_SD1_DAT2_B, FN_HCTS0_A, FN_CTS0, FN_SD1_DAT3_B, + FN_HRTS0_A, FN_RTS0, FN_SSI_SCK4, FN_DU0_DR0, + FN_LCDOUT0, FN_AUDATA2, FN_ARM_TRACEDATA_2, + FN_SDA3_C, FN_ADICHS1, FN_TS_SDEN0_B, FN_SSI_WS4, + FN_DU0_DR1, FN_LCDOUT1, FN_AUDATA3, FN_ARM_TRACEDATA_3, + FN_SCL3_C, FN_ADICHS2, FN_TS_SPSYNC0_B, + FN_DU0_DR2, FN_LCDOUT2, FN_DU0_DR3, FN_LCDOUT3, + FN_DU0_DR4, FN_LCDOUT4, FN_DU0_DR5, FN_LCDOUT5, + FN_DU0_DR6, FN_LCDOUT6, + + /* IPSR4 */ + FN_DU0_DR7, FN_LCDOUT7, FN_DU0_DG0, FN_LCDOUT8, + FN_AUDATA4, FN_ARM_TRACEDATA_4, FN_TX1_D, + FN_CAN0_TX_A, FN_ADICHS0, FN_DU0_DG1, FN_LCDOUT9, + FN_AUDATA5, FN_ARM_TRACEDATA_5, FN_RX1_D, + FN_CAN0_RX_A, FN_ADIDATA, FN_DU0_DG2, FN_LCDOUT10, + FN_DU0_DG3, FN_LCDOUT11, FN_DU0_DG4, FN_LCDOUT12, + FN_RX0_B, FN_DU0_DG5, FN_LCDOUT13, FN_TX0_B, + FN_DU0_DG6, FN_LCDOUT14, FN_RX4_A, FN_DU0_DG7, + FN_LCDOUT15, FN_TX4_A, FN_SSI_SCK2_B, FN_VI0_R0_B, + FN_DU0_DB0, FN_LCDOUT16, FN_AUDATA6, FN_ARM_TRACEDATA_6, + FN_GPSCLK_A, FN_PWM0_A, FN_ADICLK, FN_TS_SDAT0_B, + FN_AUDIO_CLKC, FN_VI0_R1_B, FN_DU0_DB1, FN_LCDOUT17, + FN_AUDATA7, FN_ARM_TRACEDATA_7, FN_GPSIN_A, + FN_ADICS_SAMP, FN_TS_SCK0_B, FN_VI0_R2_B, FN_DU0_DB2, + FN_LCDOUT18, FN_VI0_R3_B, FN_DU0_DB3, FN_LCDOUT19, + FN_VI0_R4_B, FN_DU0_DB4, FN_LCDOUT20, + + /* IPSR5 */ + FN_VI0_R5_B, FN_DU0_DB5, FN_LCDOUT21, FN_VI1_DATA10_B, + FN_DU0_DB6, FN_LCDOUT22, FN_VI1_DATA11_B, + FN_DU0_DB7, FN_LCDOUT23, FN_DU0_DOTCLKIN, + FN_QSTVA_QVS, FN_DU0_DOTCLKO_UT0, FN_QCLK, + FN_DU0_DOTCLKO_UT1, FN_QSTVB_QVE, FN_AUDIO_CLKOUT_A, + FN_REMOCON_C, FN_SSI_WS2_B, FN_DU0_EXHSYNC_DU0_HSYNC, + FN_QSTH_QHS, FN_DU0_EXVSYNC_DU0_VSYNC, FN_QSTB_QHE, + FN_DU0_EXODDF_DU0_ODDF_DISP_CDE, + FN_QCPV_QDE, FN_FMCLK_D, FN_SSI_SCK1_A, FN_DU0_DISP, + FN_QPOLA, FN_AUDCK, FN_ARM_TRACECLK, + FN_BPFCLK_D, FN_SSI_WS1_A, FN_DU0_CDE, FN_QPOLB, + FN_AUDSYNC, FN_ARM_TRACECTL, FN_FMIN_D, + FN_SD1_CD_B, FN_SSI_SCK78, FN_HSPI_RX0_B, FN_TX1_B, + FN_SD1_WP_B, FN_SSI_WS78, FN_HSPI_CLK0_B, FN_RX1_B, + FN_CAN_CLK_D, FN_SSI_SDATA8, FN_SSI_SCK2_A, FN_HSPI_CS0_B, + FN_TX2_A, FN_CAN0_TX_B, FN_SSI_SDATA7, FN_HSPI_TX0_B, + FN_RX2_A, FN_CAN0_RX_B, + + /* IPSR6 */ + FN_SSI_SCK6, FN_HSPI_RX2_A, FN_FMCLK_B, FN_CAN1_TX_B, + FN_SSI_WS6, FN_HSPI_CLK2_A, FN_BPFCLK_B, FN_CAN1_RX_B, + FN_SSI_SDATA6, FN_HSPI_TX2_A, FN_FMIN_B, FN_SSI_SCK5, + FN_RX4_C, FN_SSI_WS5, FN_TX4_C, FN_SSI_SDATA5, + FN_RX0_D, FN_SSI_WS34, FN_ARM_TRACEDATA_8, + FN_SSI_SDATA4, FN_SSI_WS2_A, FN_ARM_TRACEDATA_9, + FN_SSI_SDATA3, FN_ARM_TRACEDATA_10, + FN_SSI_SCK012, FN_ARM_TRACEDATA_11, + FN_TX0_D, FN_SSI_WS012, FN_ARM_TRACEDATA_12, + FN_SSI_SDATA2, FN_HSPI_CS2_A, FN_ARM_TRACEDATA_13, + FN_SDA1_A, FN_SSI_SDATA1, FN_ARM_TRACEDATA_14, + FN_SCL1_A, FN_SCK2_A, FN_SSI_SDATA0, + FN_ARM_TRACEDATA_15, + FN_SD0_CLK, FN_SUB_TDO, FN_SD0_CMD, FN_SUB_TRST, + FN_SD0_DAT0, FN_SUB_TMS, FN_SD0_DAT1, FN_SUB_TCK, + FN_SD0_DAT2, FN_SUB_TDI, + + /* IPSR7 */ + FN_SD0_DAT3, FN_IRQ1_B, FN_SD0_CD, FN_TX5_A, + FN_SD0_WP, FN_RX5_A, FN_VI1_CLKENB, FN_HSPI_CLK0_A, + FN_HTX1_A, FN_RTS1_C, FN_VI1_FIELD, FN_HSPI_CS0_A, + FN_HRX1_A, FN_SCK1_C, FN_VI1_HSYNC, FN_HSPI_RX0_A, + FN_HRTS1_A, FN_FMCLK_A, FN_RX1_C, FN_VI1_VSYNC, + FN_HSPI_TX0, FN_HCTS1_A, FN_BPFCLK_A, FN_TX1_C, + FN_TCLK0, FN_HSCK1_A, FN_FMIN_A, FN_IRQ2_C, + FN_CTS1_C, FN_SPEEDIN, FN_VI0_CLK, FN_CAN_CLK_A, + FN_VI0_CLKENB, FN_SD2_DAT2_B, FN_VI1_DATA0, FN_DU1_DG6, + FN_HSPI_RX1_A, FN_RX4_B, FN_VI0_FIELD, FN_SD2_DAT3_B, + FN_VI0_R3_C, FN_VI1_DATA1, FN_DU1_DG7, FN_HSPI_CLK1_A, + FN_TX4_B, FN_VI0_HSYNC, FN_SD2_CD_B, FN_VI1_DATA2, + FN_DU1_DR2, FN_HSPI_CS1_A, FN_RX3_B, + + /* IPSR8 */ + FN_VI0_VSYNC, FN_SD2_WP_B, FN_VI1_DATA3, FN_DU1_DR3, + FN_HSPI_TX1_A, FN_TX3_B, FN_VI0_DATA0_VI0_B0, + FN_DU1_DG2, FN_IRQ2_B, FN_RX3_D, FN_VI0_DATA1_VI0_B1, + FN_DU1_DG3, FN_IRQ3_B, FN_TX3_D, FN_VI0_DATA2_VI0_B2, + FN_DU1_DG4, FN_RX0_C, FN_VI0_DATA3_VI0_B3, + FN_DU1_DG5, FN_TX1_A, FN_TX0_C, FN_VI0_DATA4_VI0_B4, + FN_DU1_DB2, FN_RX1_A, FN_VI0_DATA5_VI0_B5, + FN_DU1_DB3, FN_SCK1_A, FN_PWM4, FN_HSCK1_B, + FN_VI0_DATA6_VI0_G0, FN_DU1_DB4, FN_CTS1_A, + FN_PWM5, FN_VI0_DATA7_VI0_G1, FN_DU1_DB5, + FN_RTS1_A, FN_VI0_G2, FN_SD2_CLK_B, FN_VI1_DATA4, + FN_DU1_DR4, FN_HTX1_B, FN_VI0_G3, FN_SD2_CMD_B, + FN_VI1_DATA5, FN_DU1_DR5, FN_HRX1_B, + + /* IPSR9 */ + FN_VI0_G4, FN_SD2_DAT0_B, FN_VI1_DATA6, FN_DU1_DR6, + FN_HRTS1_B, FN_VI0_G5, FN_SD2_DAT1_B, FN_VI1_DATA7, + FN_DU1_DR7, FN_HCTS1_B, FN_VI0_R0_A, FN_VI1_CLK, + FN_ETH_REF_CLK, FN_DU1_DOTCLKIN, FN_VI0_R1_A, + FN_VI1_DATA8, FN_DU1_DB6, FN_ETH_TXD0, FN_PWM2, + FN_TCLK1, FN_VI0_R2_A, FN_VI1_DATA9, FN_DU1_DB7, + FN_ETH_TXD1, FN_PWM3, FN_VI0_R3_A, FN_ETH_CRS_DV, + FN_IECLK, FN_SCK2_C, FN_VI0_R4_A, FN_ETH_TX_EN, + FN_IETX, FN_TX2_C, FN_VI0_R5_A, FN_ETH_RX_ER, + FN_FMCLK_C, FN_IERX, FN_RX2_C, FN_VI1_DATA10_A, + FN_DU1_DOTCLKOUT, FN_ETH_RXD0, FN_BPFCLK_C, + FN_TX2_D, FN_SDA2_C, FN_VI1_DATA11_A, + FN_DU1_EXHSYNC_DU1_HSYNC, FN_ETH_RXD1, FN_FMIN_C, + FN_RX2_D, FN_SCL2_C, + + /* IPSR10 */ + FN_SD2_CLK_A, FN_DU1_EXVSYNC_DU1_VSYNC, FN_ATARD1, + FN_ETH_MDC, FN_SDA1_B, FN_SD2_CMD_A, + FN_DU1_EXODDF_DU1_ODDF_DISP_CDE, FN_ATAWR1, + FN_ETH_MDIO, FN_SCL1_B, FN_SD2_DAT0_A, FN_DU1_DISP, + FN_ATACS01, FN_DREQ1_B, FN_ETH_LINK, FN_CAN1_RX_A, + FN_SD2_DAT1_A, FN_DU1_CDE, FN_ATACS11, FN_DACK1_B, + FN_ETH_MAGIC, FN_CAN1_TX_A, FN_PWM6, FN_SD2_DAT2_A, + FN_VI1_DATA12, FN_DREQ2_B, FN_ATADIR1, FN_HSPI_CLK2_B, + FN_GPSCLK_B, FN_SD2_DAT3_A, FN_VI1_DATA13, FN_DACK2_B, + FN_ATAG1, FN_HSPI_CS2_B, FN_GPSIN_B, FN_SD2_CD_A, + FN_VI1_DATA14, FN_EX_WAIT1_B, FN_DREQ0_B, FN_HSPI_RX2_B, + FN_REMOCON_A, FN_SD2_WP_A, FN_VI1_DATA15, FN_EX_WAIT2_B, + FN_DACK0_B, FN_HSPI_TX2_B, FN_CAN_CLK_C, + + /* SEL */ + FN_SEL_SCIF5_A, FN_SEL_SCIF5_B, + FN_SEL_SCIF4_A, FN_SEL_SCIF4_B, FN_SEL_SCIF4_C, + FN_SEL_SCIF3_A, FN_SEL_SCIF3_B, FN_SEL_SCIF3_C, FN_SEL_SCIF3_D, + FN_SEL_SCIF2_A, FN_SEL_SCIF2_B, FN_SEL_SCIF2_C, FN_SEL_SCIF2_D, FN_SEL_SCIF2_E, + FN_SEL_SCIF1_A, FN_SEL_SCIF1_B, FN_SEL_SCIF1_C, FN_SEL_SCIF1_D, + FN_SEL_SCIF0_A, FN_SEL_SCIF0_B, FN_SEL_SCIF0_C, FN_SEL_SCIF0_D, + FN_SEL_SSI2_A, FN_SEL_SSI2_B, + FN_SEL_SSI1_A, FN_SEL_SSI1_B, + FN_SEL_VI1_A, FN_SEL_VI1_B, + FN_SEL_VI0_A, FN_SEL_VI0_B, FN_SEL_VI0_C, FN_SEL_VI0_D, + FN_SEL_SD2_A, FN_SEL_SD2_B, + FN_SEL_SD1_A, FN_SEL_SD1_B, + FN_SEL_IRQ3_A, FN_SEL_IRQ3_B, + FN_SEL_IRQ2_A, FN_SEL_IRQ2_B, FN_SEL_IRQ2_C, + FN_SEL_IRQ1_A, FN_SEL_IRQ1_B, + FN_SEL_DREQ2_A, FN_SEL_DREQ2_B, + FN_SEL_DREQ1_A, FN_SEL_DREQ1_B, + FN_SEL_DREQ0_A, FN_SEL_DREQ0_B, + FN_SEL_WAIT2_A, FN_SEL_WAIT2_B, + FN_SEL_WAIT1_A, FN_SEL_WAIT1_B, + FN_SEL_CAN1_A, FN_SEL_CAN1_B, + FN_SEL_CAN0_A, FN_SEL_CAN0_B, + FN_SEL_CANCLK_A, FN_SEL_CANCLK_B, + FN_SEL_CANCLK_C, FN_SEL_CANCLK_D, + FN_SEL_HSCIF1_A, FN_SEL_HSCIF1_B, + FN_SEL_HSCIF0_A, FN_SEL_HSCIF0_B, + FN_SEL_REMOCON_A, FN_SEL_REMOCON_B, FN_SEL_REMOCON_C, + FN_SEL_FM_A, FN_SEL_FM_B, FN_SEL_FM_C, FN_SEL_FM_D, + FN_SEL_GPS_A, FN_SEL_GPS_B, FN_SEL_GPS_C, + FN_SEL_TSIF0_A, FN_SEL_TSIF0_B, + FN_SEL_HSPI2_A, FN_SEL_HSPI2_B, + FN_SEL_HSPI1_A, FN_SEL_HSPI1_B, + FN_SEL_HSPI0_A, FN_SEL_HSPI0_B, + FN_SEL_I2C3_A, FN_SEL_I2C3_B, FN_SEL_I2C3_C, + FN_SEL_I2C2_A, FN_SEL_I2C2_B, FN_SEL_I2C2_C, + FN_SEL_I2C1_A, FN_SEL_I2C1_B, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + + /* GPSR0 */ + PENC0_MARK, PENC1_MARK, A1_MARK, A2_MARK, A3_MARK, + + /* GPSR1 */ + WE0_MARK, + + /* GPSR2 */ + AUDIO_CLKA_MARK, + AUDIO_CLKB_MARK, + + /* GPSR3 */ + SSI_SCK34_MARK, + + /* GPSR4 */ + AVS1_MARK, + AVS2_MARK, + + VI0_R0_C_MARK, /* see sel_vi0 */ + VI0_R1_C_MARK, /* see sel_vi0 */ + VI0_R2_C_MARK, /* see sel_vi0 */ + /* VI0_R3_C_MARK, */ + VI0_R4_C_MARK, /* see sel_vi0 */ + VI0_R5_C_MARK, /* see sel_vi0 */ + + VI0_R0_D_MARK, /* see sel_vi0 */ + VI0_R1_D_MARK, /* see sel_vi0 */ + VI0_R2_D_MARK, /* see sel_vi0 */ + VI0_R3_D_MARK, /* see sel_vi0 */ + VI0_R4_D_MARK, /* see sel_vi0 */ + VI0_R5_D_MARK, /* see sel_vi0 */ + + /* IPSR0 */ + PRESETOUT_MARK, PWM1_MARK, AUDATA0_MARK, + ARM_TRACEDATA_0_MARK, GPSCLK_C_MARK, USB_OVC0_MARK, + TX2_E_MARK, SDA2_B_MARK, AUDATA1_MARK, ARM_TRACEDATA_1_MARK, + GPSIN_C_MARK, USB_OVC1_MARK, RX2_E_MARK, SCL2_B_MARK, + SD1_DAT2_A_MARK, MMC_D2_MARK, BS_MARK, + ATADIR0_A_MARK, SDSELF_A_MARK, PWM4_B_MARK, SD1_DAT3_A_MARK, + MMC_D3_MARK, A0_MARK, ATAG0_A_MARK, REMOCON_B_MARK, + A4_MARK, A5_MARK, A6_MARK, A7_MARK, + A8_MARK, A9_MARK, A10_MARK, A11_MARK, + A12_MARK, A13_MARK, A14_MARK, A15_MARK, + A16_MARK, A17_MARK, A18_MARK, A19_MARK, + + /* IPSR1 */ + A20_MARK, HSPI_CS1_B_MARK, A21_MARK, + HSPI_CLK1_B_MARK, A22_MARK, HRTS0_B_MARK, + RX2_B_MARK, DREQ2_A_MARK, A23_MARK, HTX0_B_MARK, + TX2_B_MARK, DACK2_A_MARK, TS_SDEN0_A_MARK, + SD1_CD_A_MARK, MMC_D6_MARK, A24_MARK, DREQ1_A_MARK, + HRX0_B_MARK, TS_SPSYNC0_A_MARK, SD1_WP_A_MARK, + MMC_D7_MARK, A25_MARK, DACK1_A_MARK, HCTS0_B_MARK, + RX3_C_MARK, TS_SDAT0_A_MARK, CLKOUT_MARK, + HSPI_TX1_B_MARK, PWM0_B_MARK, CS0_MARK, + HSPI_RX1_B_MARK, SSI_SCK1_B_MARK, + ATAG0_B_MARK, CS1_A26_MARK, SDA2_A_MARK, SCK2_B_MARK, + MMC_D5_MARK, ATADIR0_B_MARK, RD_WR_MARK, WE1_MARK, + ATAWR0_B_MARK, SSI_WS1_B_MARK, EX_CS0_MARK, SCL2_A_MARK, + TX3_C_MARK, TS_SCK0_A_MARK, EX_CS1_MARK, MMC_D4_MARK, + + /* IPSR2 */ + SD1_CLK_A_MARK, MMC_CLK_MARK, ATACS00_MARK, EX_CS2_MARK, + SD1_CMD_A_MARK, MMC_CMD_MARK, ATACS10_MARK, EX_CS3_MARK, + SD1_DAT0_A_MARK, MMC_D0_MARK, ATARD0_MARK, + EX_CS4_MARK, EX_WAIT1_A_MARK, SD1_DAT1_A_MARK, + MMC_D1_MARK, ATAWR0_A_MARK, EX_CS5_MARK, EX_WAIT2_A_MARK, + DREQ0_A_MARK, RX3_A_MARK, DACK0_MARK, TX3_A_MARK, + DRACK0_MARK, EX_WAIT0_MARK, PWM0_C_MARK, D0_MARK, + D1_MARK, D2_MARK, D3_MARK, D4_MARK, + D5_MARK, D6_MARK, D7_MARK, D8_MARK, + D9_MARK, D10_MARK, D11_MARK, RD_WR_B_MARK, + IRQ0_MARK, MLB_CLK_MARK, IRQ1_A_MARK, + + /* IPSR3 */ + MLB_SIG_MARK, RX5_B_MARK, SDA3_A_MARK, IRQ2_A_MARK, + MLB_DAT_MARK, TX5_B_MARK, SCL3_A_MARK, IRQ3_A_MARK, + SDSELF_B_MARK, SD1_CMD_B_MARK, SCIF_CLK_MARK, AUDIO_CLKOUT_B_MARK, + CAN_CLK_B_MARK, SDA3_B_MARK, SD1_CLK_B_MARK, HTX0_A_MARK, + TX0_A_MARK, SD1_DAT0_B_MARK, HRX0_A_MARK, + RX0_A_MARK, SD1_DAT1_B_MARK, HSCK0_MARK, + SCK0_MARK, SCL3_B_MARK, SD1_DAT2_B_MARK, + HCTS0_A_MARK, CTS0_MARK, SD1_DAT3_B_MARK, + HRTS0_A_MARK, RTS0_MARK, SSI_SCK4_MARK, + DU0_DR0_MARK, LCDOUT0_MARK, AUDATA2_MARK, ARM_TRACEDATA_2_MARK, + SDA3_C_MARK, ADICHS1_MARK, TS_SDEN0_B_MARK, + SSI_WS4_MARK, DU0_DR1_MARK, LCDOUT1_MARK, AUDATA3_MARK, + ARM_TRACEDATA_3_MARK, SCL3_C_MARK, ADICHS2_MARK, + TS_SPSYNC0_B_MARK, DU0_DR2_MARK, LCDOUT2_MARK, + DU0_DR3_MARK, LCDOUT3_MARK, DU0_DR4_MARK, LCDOUT4_MARK, + DU0_DR5_MARK, LCDOUT5_MARK, DU0_DR6_MARK, LCDOUT6_MARK, + + /* IPSR4 */ + DU0_DR7_MARK, LCDOUT7_MARK, DU0_DG0_MARK, LCDOUT8_MARK, + AUDATA4_MARK, ARM_TRACEDATA_4_MARK, + TX1_D_MARK, CAN0_TX_A_MARK, ADICHS0_MARK, DU0_DG1_MARK, + LCDOUT9_MARK, AUDATA5_MARK, ARM_TRACEDATA_5_MARK, + RX1_D_MARK, CAN0_RX_A_MARK, ADIDATA_MARK, DU0_DG2_MARK, + LCDOUT10_MARK, DU0_DG3_MARK, LCDOUT11_MARK, DU0_DG4_MARK, + LCDOUT12_MARK, RX0_B_MARK, DU0_DG5_MARK, LCDOUT13_MARK, + TX0_B_MARK, DU0_DG6_MARK, LCDOUT14_MARK, RX4_A_MARK, + DU0_DG7_MARK, LCDOUT15_MARK, TX4_A_MARK, SSI_SCK2_B_MARK, + VI0_R0_B_MARK, DU0_DB0_MARK, LCDOUT16_MARK, AUDATA6_MARK, + ARM_TRACEDATA_6_MARK, GPSCLK_A_MARK, PWM0_A_MARK, + ADICLK_MARK, TS_SDAT0_B_MARK, AUDIO_CLKC_MARK, + VI0_R1_B_MARK, DU0_DB1_MARK, LCDOUT17_MARK, AUDATA7_MARK, + ARM_TRACEDATA_7_MARK, GPSIN_A_MARK, ADICS_SAMP_MARK, + TS_SCK0_B_MARK, VI0_R2_B_MARK, DU0_DB2_MARK, LCDOUT18_MARK, + VI0_R3_B_MARK, DU0_DB3_MARK, LCDOUT19_MARK, VI0_R4_B_MARK, + DU0_DB4_MARK, LCDOUT20_MARK, + + /* IPSR5 */ + VI0_R5_B_MARK, DU0_DB5_MARK, LCDOUT21_MARK, VI1_DATA10_B_MARK, + DU0_DB6_MARK, LCDOUT22_MARK, VI1_DATA11_B_MARK, + DU0_DB7_MARK, LCDOUT23_MARK, DU0_DOTCLKIN_MARK, + QSTVA_QVS_MARK, DU0_DOTCLKO_UT0_MARK, + QCLK_MARK, DU0_DOTCLKO_UT1_MARK, QSTVB_QVE_MARK, + AUDIO_CLKOUT_A_MARK, REMOCON_C_MARK, SSI_WS2_B_MARK, + DU0_EXHSYNC_DU0_HSYNC_MARK, QSTH_QHS_MARK, + DU0_EXVSYNC_DU0_VSYNC_MARK, QSTB_QHE_MARK, + DU0_EXODDF_DU0_ODDF_DISP_CDE_MARK, + QCPV_QDE_MARK, FMCLK_D_MARK, SSI_SCK1_A_MARK, + DU0_DISP_MARK, QPOLA_MARK, AUDCK_MARK, ARM_TRACECLK_MARK, + BPFCLK_D_MARK, SSI_WS1_A_MARK, DU0_CDE_MARK, QPOLB_MARK, + AUDSYNC_MARK, ARM_TRACECTL_MARK, FMIN_D_MARK, + SD1_CD_B_MARK, SSI_SCK78_MARK, HSPI_RX0_B_MARK, + TX1_B_MARK, SD1_WP_B_MARK, SSI_WS78_MARK, HSPI_CLK0_B_MARK, + RX1_B_MARK, CAN_CLK_D_MARK, SSI_SDATA8_MARK, + SSI_SCK2_A_MARK, HSPI_CS0_B_MARK, + TX2_A_MARK, CAN0_TX_B_MARK, SSI_SDATA7_MARK, + HSPI_TX0_B_MARK, RX2_A_MARK, CAN0_RX_B_MARK, + + /* IPSR6 */ + SSI_SCK6_MARK, HSPI_RX2_A_MARK, FMCLK_B_MARK, + CAN1_TX_B_MARK, SSI_WS6_MARK, HSPI_CLK2_A_MARK, + BPFCLK_B_MARK, CAN1_RX_B_MARK, SSI_SDATA6_MARK, + HSPI_TX2_A_MARK, FMIN_B_MARK, SSI_SCK5_MARK, + RX4_C_MARK, SSI_WS5_MARK, TX4_C_MARK, SSI_SDATA5_MARK, + RX0_D_MARK, SSI_WS34_MARK, ARM_TRACEDATA_8_MARK, + SSI_SDATA4_MARK, SSI_WS2_A_MARK, ARM_TRACEDATA_9_MARK, + SSI_SDATA3_MARK, ARM_TRACEDATA_10_MARK, + SSI_SCK012_MARK, ARM_TRACEDATA_11_MARK, + TX0_D_MARK, SSI_WS012_MARK, ARM_TRACEDATA_12_MARK, + SSI_SDATA2_MARK, HSPI_CS2_A_MARK, + ARM_TRACEDATA_13_MARK, SDA1_A_MARK, SSI_SDATA1_MARK, + ARM_TRACEDATA_14_MARK, SCL1_A_MARK, SCK2_A_MARK, + SSI_SDATA0_MARK, ARM_TRACEDATA_15_MARK, + SD0_CLK_MARK, SUB_TDO_MARK, SD0_CMD_MARK, SUB_TRST_MARK, + SD0_DAT0_MARK, SUB_TMS_MARK, SD0_DAT1_MARK, SUB_TCK_MARK, + SD0_DAT2_MARK, SUB_TDI_MARK, + + /* IPSR7 */ + SD0_DAT3_MARK, IRQ1_B_MARK, SD0_CD_MARK, TX5_A_MARK, + SD0_WP_MARK, RX5_A_MARK, VI1_CLKENB_MARK, + HSPI_CLK0_A_MARK, HTX1_A_MARK, RTS1_C_MARK, VI1_FIELD_MARK, + HSPI_CS0_A_MARK, HRX1_A_MARK, SCK1_C_MARK, VI1_HSYNC_MARK, + HSPI_RX0_A_MARK, HRTS1_A_MARK, FMCLK_A_MARK, RX1_C_MARK, + VI1_VSYNC_MARK, HSPI_TX0_MARK, HCTS1_A_MARK, BPFCLK_A_MARK, + TX1_C_MARK, TCLK0_MARK, HSCK1_A_MARK, FMIN_A_MARK, + IRQ2_C_MARK, CTS1_C_MARK, SPEEDIN_MARK, VI0_CLK_MARK, + CAN_CLK_A_MARK, VI0_CLKENB_MARK, SD2_DAT2_B_MARK, + VI1_DATA0_MARK, DU1_DG6_MARK, HSPI_RX1_A_MARK, + RX4_B_MARK, VI0_FIELD_MARK, SD2_DAT3_B_MARK, + VI0_R3_C_MARK, VI1_DATA1_MARK, DU1_DG7_MARK, HSPI_CLK1_A_MARK, + TX4_B_MARK, VI0_HSYNC_MARK, SD2_CD_B_MARK, VI1_DATA2_MARK, + DU1_DR2_MARK, HSPI_CS1_A_MARK, RX3_B_MARK, + + /* IPSR8 */ + VI0_VSYNC_MARK, SD2_WP_B_MARK, VI1_DATA3_MARK, DU1_DR3_MARK, + HSPI_TX1_A_MARK, TX3_B_MARK, VI0_DATA0_VI0_B0_MARK, + DU1_DG2_MARK, IRQ2_B_MARK, RX3_D_MARK, VI0_DATA1_VI0_B1_MARK, + DU1_DG3_MARK, IRQ3_B_MARK, TX3_D_MARK, VI0_DATA2_VI0_B2_MARK, + DU1_DG4_MARK, RX0_C_MARK, VI0_DATA3_VI0_B3_MARK, + DU1_DG5_MARK, TX1_A_MARK, TX0_C_MARK, VI0_DATA4_VI0_B4_MARK, + DU1_DB2_MARK, RX1_A_MARK, VI0_DATA5_VI0_B5_MARK, + DU1_DB3_MARK, SCK1_A_MARK, PWM4_MARK, HSCK1_B_MARK, + VI0_DATA6_VI0_G0_MARK, DU1_DB4_MARK, CTS1_A_MARK, + PWM5_MARK, VI0_DATA7_VI0_G1_MARK, DU1_DB5_MARK, + RTS1_A_MARK, VI0_G2_MARK, SD2_CLK_B_MARK, VI1_DATA4_MARK, + DU1_DR4_MARK, HTX1_B_MARK, VI0_G3_MARK, SD2_CMD_B_MARK, + VI1_DATA5_MARK, DU1_DR5_MARK, HRX1_B_MARK, + + /* IPSR9 */ + VI0_G4_MARK, SD2_DAT0_B_MARK, VI1_DATA6_MARK, + DU1_DR6_MARK, HRTS1_B_MARK, VI0_G5_MARK, SD2_DAT1_B_MARK, + VI1_DATA7_MARK, DU1_DR7_MARK, HCTS1_B_MARK, VI0_R0_A_MARK, + VI1_CLK_MARK, ETH_REF_CLK_MARK, DU1_DOTCLKIN_MARK, + VI0_R1_A_MARK, VI1_DATA8_MARK, DU1_DB6_MARK, ETH_TXD0_MARK, + PWM2_MARK, TCLK1_MARK, VI0_R2_A_MARK, VI1_DATA9_MARK, + DU1_DB7_MARK, ETH_TXD1_MARK, PWM3_MARK, VI0_R3_A_MARK, + ETH_CRS_DV_MARK, IECLK_MARK, SCK2_C_MARK, + VI0_R4_A_MARK, ETH_TX_EN_MARK, IETX_MARK, + TX2_C_MARK, VI0_R5_A_MARK, ETH_RX_ER_MARK, FMCLK_C_MARK, + IERX_MARK, RX2_C_MARK, VI1_DATA10_A_MARK, + DU1_DOTCLKOUT_MARK, ETH_RXD0_MARK, + BPFCLK_C_MARK, TX2_D_MARK, SDA2_C_MARK, VI1_DATA11_A_MARK, + DU1_EXHSYNC_DU1_HSYNC_MARK, ETH_RXD1_MARK, FMIN_C_MARK, + RX2_D_MARK, SCL2_C_MARK, + + /* IPSR10 */ + SD2_CLK_A_MARK, DU1_EXVSYNC_DU1_VSYNC_MARK, ATARD1_MARK, + ETH_MDC_MARK, SDA1_B_MARK, SD2_CMD_A_MARK, + DU1_EXODDF_DU1_ODDF_DISP_CDE_MARK, ATAWR1_MARK, + ETH_MDIO_MARK, SCL1_B_MARK, SD2_DAT0_A_MARK, + DU1_DISP_MARK, ATACS01_MARK, DREQ1_B_MARK, ETH_LINK_MARK, + CAN1_RX_A_MARK, SD2_DAT1_A_MARK, DU1_CDE_MARK, + ATACS11_MARK, DACK1_B_MARK, ETH_MAGIC_MARK, CAN1_TX_A_MARK, + PWM6_MARK, SD2_DAT2_A_MARK, VI1_DATA12_MARK, + DREQ2_B_MARK, ATADIR1_MARK, HSPI_CLK2_B_MARK, + GPSCLK_B_MARK, SD2_DAT3_A_MARK, VI1_DATA13_MARK, + DACK2_B_MARK, ATAG1_MARK, HSPI_CS2_B_MARK, + GPSIN_B_MARK, SD2_CD_A_MARK, VI1_DATA14_MARK, + EX_WAIT1_B_MARK, DREQ0_B_MARK, HSPI_RX2_B_MARK, + REMOCON_A_MARK, SD2_WP_A_MARK, VI1_DATA15_MARK, + EX_WAIT2_B_MARK, DACK0_B_MARK, + HSPI_TX2_B_MARK, CAN_CLK_C_MARK, + + PINMUX_MARK_END, +}; + +static const pinmux_enum_t pinmux_data[] = { + PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */ + + PINMUX_DATA(PENC0_MARK, FN_PENC0), + PINMUX_DATA(PENC1_MARK, FN_PENC1), + PINMUX_DATA(A1_MARK, FN_A1), + PINMUX_DATA(A2_MARK, FN_A2), + PINMUX_DATA(A3_MARK, FN_A3), + PINMUX_DATA(WE0_MARK, FN_WE0), + PINMUX_DATA(AUDIO_CLKA_MARK, FN_AUDIO_CLKA), + PINMUX_DATA(AUDIO_CLKB_MARK, FN_AUDIO_CLKB), + PINMUX_DATA(SSI_SCK34_MARK, FN_SSI_SCK34), + PINMUX_DATA(AVS1_MARK, FN_AVS1), + PINMUX_DATA(AVS2_MARK, FN_AVS2), + + /* IPSR0 */ + PINMUX_IPSR_DATA(IP0_1_0, PRESETOUT), + PINMUX_IPSR_DATA(IP0_1_0, PWM1), + + PINMUX_IPSR_DATA(IP0_4_2, AUDATA0), + PINMUX_IPSR_DATA(IP0_4_2, ARM_TRACEDATA_0), + PINMUX_IPSR_MSEL(IP0_4_2, GPSCLK_C, SEL_GPS_C), + PINMUX_IPSR_DATA(IP0_4_2, USB_OVC0), + PINMUX_IPSR_DATA(IP0_4_2, TX2_E), + PINMUX_IPSR_MSEL(IP0_4_2, SDA2_B, SEL_I2C2_B), + + PINMUX_IPSR_DATA(IP0_7_5, AUDATA1), + PINMUX_IPSR_DATA(IP0_7_5, ARM_TRACEDATA_1), + PINMUX_IPSR_MSEL(IP0_7_5, GPSIN_C, SEL_GPS_C), + PINMUX_IPSR_DATA(IP0_7_5, USB_OVC1), + PINMUX_IPSR_MSEL(IP0_7_5, RX2_E, SEL_SCIF2_E), + PINMUX_IPSR_MSEL(IP0_7_5, SCL2_B, SEL_I2C2_B), + + PINMUX_IPSR_MSEL(IP0_11_8, SD1_DAT2_A, SEL_SD1_A), + PINMUX_IPSR_DATA(IP0_11_8, MMC_D2), + PINMUX_IPSR_DATA(IP0_11_8, BS), + PINMUX_IPSR_DATA(IP0_11_8, ATADIR0_A), + PINMUX_IPSR_DATA(IP0_11_8, SDSELF_A), + PINMUX_IPSR_DATA(IP0_11_8, PWM4_B), + + PINMUX_IPSR_MSEL(IP0_14_12, SD1_DAT3_A, SEL_SD1_A), + PINMUX_IPSR_DATA(IP0_14_12, MMC_D3), + PINMUX_IPSR_DATA(IP0_14_12, A0), + PINMUX_IPSR_DATA(IP0_14_12, ATAG0_A), + PINMUX_IPSR_MSEL(IP0_14_12, REMOCON_B, SEL_REMOCON_B), + + PINMUX_IPSR_DATA(IP0_15, A4), + PINMUX_IPSR_DATA(IP0_16, A5), + PINMUX_IPSR_DATA(IP0_17, A6), + PINMUX_IPSR_DATA(IP0_18, A7), + PINMUX_IPSR_DATA(IP0_19, A8), + PINMUX_IPSR_DATA(IP0_20, A9), + PINMUX_IPSR_DATA(IP0_21, A10), + PINMUX_IPSR_DATA(IP0_22, A11), + PINMUX_IPSR_DATA(IP0_23, A12), + PINMUX_IPSR_DATA(IP0_24, A13), + PINMUX_IPSR_DATA(IP0_25, A14), + PINMUX_IPSR_DATA(IP0_26, A15), + PINMUX_IPSR_DATA(IP0_27, A16), + PINMUX_IPSR_DATA(IP0_28, A17), + PINMUX_IPSR_DATA(IP0_29, A18), + PINMUX_IPSR_DATA(IP0_30, A19), + + /* IPSR1 */ + PINMUX_IPSR_DATA(IP1_0, A20), + PINMUX_IPSR_MSEL(IP1_0, HSPI_CS1_B, SEL_HSPI1_B), + + PINMUX_IPSR_DATA(IP1_1, A21), + PINMUX_IPSR_MSEL(IP1_1, HSPI_CLK1_B, SEL_HSPI1_B), + + PINMUX_IPSR_DATA(IP1_4_2, A22), + PINMUX_IPSR_MSEL(IP1_4_2, HRTS0_B, SEL_HSCIF0_B), + PINMUX_IPSR_MSEL(IP1_4_2, RX2_B, SEL_SCIF2_B), + PINMUX_IPSR_MSEL(IP1_4_2, DREQ2_A, SEL_DREQ2_A), + + PINMUX_IPSR_DATA(IP1_7_5, A23), + PINMUX_IPSR_DATA(IP1_7_5, HTX0_B), + PINMUX_IPSR_DATA(IP1_7_5, TX2_B), + PINMUX_IPSR_DATA(IP1_7_5, DACK2_A), + PINMUX_IPSR_MSEL(IP1_7_5, TS_SDEN0_A, SEL_TSIF0_A), + + PINMUX_IPSR_MSEL(IP1_10_8, SD1_CD_A, SEL_SD1_A), + PINMUX_IPSR_DATA(IP1_10_8, MMC_D6), + PINMUX_IPSR_DATA(IP1_10_8, A24), + PINMUX_IPSR_MSEL(IP1_10_8, DREQ1_A, SEL_DREQ1_A), + PINMUX_IPSR_MSEL(IP1_10_8, HRX0_B, SEL_HSCIF0_B), + PINMUX_IPSR_MSEL(IP1_10_8, TS_SPSYNC0_A, SEL_TSIF0_A), + + PINMUX_IPSR_MSEL(IP1_14_11, SD1_WP_A, SEL_SD1_A), + PINMUX_IPSR_DATA(IP1_14_11, MMC_D7), + PINMUX_IPSR_DATA(IP1_14_11, A25), + PINMUX_IPSR_DATA(IP1_14_11, DACK1_A), + PINMUX_IPSR_MSEL(IP1_14_11, HCTS0_B, SEL_HSCIF0_B), + PINMUX_IPSR_MSEL(IP1_14_11, RX3_C, SEL_SCIF3_C), + PINMUX_IPSR_MSEL(IP1_14_11, TS_SDAT0_A, SEL_TSIF0_A), + + PINMUX_IPSR_NOGP(IP1_16_15, CLKOUT), + PINMUX_IPSR_NOGP(IP1_16_15, HSPI_TX1_B), + PINMUX_IPSR_NOGP(IP1_16_15, PWM0_B), + + PINMUX_IPSR_NOGP(IP1_17, CS0), + PINMUX_IPSR_NOGM(IP1_17, HSPI_RX1_B, SEL_HSPI1_B), + + PINMUX_IPSR_NOGM(IP1_20_18, SSI_SCK1_B, SEL_SSI1_B), + PINMUX_IPSR_NOGP(IP1_20_18, ATAG0_B), + PINMUX_IPSR_NOGP(IP1_20_18, CS1_A26), + PINMUX_IPSR_NOGM(IP1_20_18, SDA2_A, SEL_I2C2_A), + PINMUX_IPSR_NOGM(IP1_20_18, SCK2_B, SEL_SCIF2_B), + + PINMUX_IPSR_DATA(IP1_23_21, MMC_D5), + PINMUX_IPSR_DATA(IP1_23_21, ATADIR0_B), + PINMUX_IPSR_DATA(IP1_23_21, RD_WR), + + PINMUX_IPSR_DATA(IP1_24, WE1), + PINMUX_IPSR_DATA(IP1_24, ATAWR0_B), + + PINMUX_IPSR_MSEL(IP1_27_25, SSI_WS1_B, SEL_SSI1_B), + PINMUX_IPSR_DATA(IP1_27_25, EX_CS0), + PINMUX_IPSR_MSEL(IP1_27_25, SCL2_A, SEL_I2C2_A), + PINMUX_IPSR_DATA(IP1_27_25, TX3_C), + PINMUX_IPSR_MSEL(IP1_27_25, TS_SCK0_A, SEL_TSIF0_A), + + PINMUX_IPSR_DATA(IP1_29_28, EX_CS1), + PINMUX_IPSR_DATA(IP1_29_28, MMC_D4), + + /* IPSR2 */ + PINMUX_IPSR_DATA(IP2_2_0, SD1_CLK_A), + PINMUX_IPSR_DATA(IP2_2_0, MMC_CLK), + PINMUX_IPSR_DATA(IP2_2_0, ATACS00), + PINMUX_IPSR_DATA(IP2_2_0, EX_CS2), + + PINMUX_IPSR_MSEL(IP2_5_3, SD1_CMD_A, SEL_SD1_A), + PINMUX_IPSR_DATA(IP2_5_3, MMC_CMD), + PINMUX_IPSR_DATA(IP2_5_3, ATACS10), + PINMUX_IPSR_DATA(IP2_5_3, EX_CS3), + + PINMUX_IPSR_MSEL(IP2_8_6, SD1_DAT0_A, SEL_SD1_A), + PINMUX_IPSR_DATA(IP2_8_6, MMC_D0), + PINMUX_IPSR_DATA(IP2_8_6, ATARD0), + PINMUX_IPSR_DATA(IP2_8_6, EX_CS4), + PINMUX_IPSR_MSEL(IP2_8_6, EX_WAIT1_A, SEL_WAIT1_A), + + PINMUX_IPSR_MSEL(IP2_11_9, SD1_DAT1_A, SEL_SD1_A), + PINMUX_IPSR_DATA(IP2_11_9, MMC_D1), + PINMUX_IPSR_DATA(IP2_11_9, ATAWR0_A), + PINMUX_IPSR_DATA(IP2_11_9, EX_CS5), + PINMUX_IPSR_MSEL(IP2_11_9, EX_WAIT2_A, SEL_WAIT2_A), + + PINMUX_IPSR_MSEL(IP2_13_12, DREQ0_A, SEL_DREQ0_A), + PINMUX_IPSR_MSEL(IP2_13_12, RX3_A, SEL_SCIF3_A), + + PINMUX_IPSR_DATA(IP2_16_14, DACK0), + PINMUX_IPSR_DATA(IP2_16_14, TX3_A), + PINMUX_IPSR_DATA(IP2_16_14, DRACK0), + + PINMUX_IPSR_DATA(IP2_17, EX_WAIT0), + PINMUX_IPSR_DATA(IP2_17, PWM0_C), + + PINMUX_IPSR_NOGP(IP2_18, D0), + PINMUX_IPSR_NOGP(IP2_19, D1), + PINMUX_IPSR_NOGP(IP2_20, D2), + PINMUX_IPSR_NOGP(IP2_21, D3), + PINMUX_IPSR_NOGP(IP2_22, D4), + PINMUX_IPSR_NOGP(IP2_23, D5), + PINMUX_IPSR_NOGP(IP2_24, D6), + PINMUX_IPSR_NOGP(IP2_25, D7), + PINMUX_IPSR_NOGP(IP2_26, D8), + PINMUX_IPSR_NOGP(IP2_27, D9), + PINMUX_IPSR_NOGP(IP2_28, D10), + PINMUX_IPSR_NOGP(IP2_29, D11), + + PINMUX_IPSR_DATA(IP2_30, RD_WR_B), + PINMUX_IPSR_DATA(IP2_30, IRQ0), + + PINMUX_IPSR_DATA(IP2_31, MLB_CLK), + PINMUX_IPSR_MSEL(IP2_31, IRQ1_A, SEL_IRQ1_A), + + /* IPSR3 */ + PINMUX_IPSR_DATA(IP3_1_0, MLB_SIG), + PINMUX_IPSR_MSEL(IP3_1_0, RX5_B, SEL_SCIF5_B), + PINMUX_IPSR_MSEL(IP3_1_0, SDA3_A, SEL_I2C3_A), + PINMUX_IPSR_MSEL(IP3_1_0, IRQ2_A, SEL_IRQ2_A), + + PINMUX_IPSR_DATA(IP3_4_2, MLB_DAT), + PINMUX_IPSR_DATA(IP3_4_2, TX5_B), + PINMUX_IPSR_MSEL(IP3_4_2, SCL3_A, SEL_I2C3_A), + PINMUX_IPSR_MSEL(IP3_4_2, IRQ3_A, SEL_IRQ3_A), + PINMUX_IPSR_DATA(IP3_4_2, SDSELF_B), + + PINMUX_IPSR_MSEL(IP3_7_5, SD1_CMD_B, SEL_SD1_B), + PINMUX_IPSR_DATA(IP3_7_5, SCIF_CLK), + PINMUX_IPSR_DATA(IP3_7_5, AUDIO_CLKOUT_B), + PINMUX_IPSR_MSEL(IP3_7_5, CAN_CLK_B, SEL_CANCLK_B), + PINMUX_IPSR_MSEL(IP3_7_5, SDA3_B, SEL_I2C3_B), + + PINMUX_IPSR_DATA(IP3_9_8, SD1_CLK_B), + PINMUX_IPSR_DATA(IP3_9_8, HTX0_A), + PINMUX_IPSR_DATA(IP3_9_8, TX0_A), + + PINMUX_IPSR_MSEL(IP3_12_10, SD1_DAT0_B, SEL_SD1_B), + PINMUX_IPSR_MSEL(IP3_12_10, HRX0_A, SEL_HSCIF0_A), + PINMUX_IPSR_MSEL(IP3_12_10, RX0_A, SEL_SCIF0_A), + + PINMUX_IPSR_MSEL(IP3_15_13, SD1_DAT1_B, SEL_SD1_B), + PINMUX_IPSR_MSEL(IP3_15_13, HSCK0, SEL_HSCIF0_A), + PINMUX_IPSR_DATA(IP3_15_13, SCK0), + PINMUX_IPSR_MSEL(IP3_15_13, SCL3_B, SEL_I2C3_B), + + PINMUX_IPSR_MSEL(IP3_18_16, SD1_DAT2_B, SEL_SD1_B), + PINMUX_IPSR_MSEL(IP3_18_16, HCTS0_A, SEL_HSCIF0_A), + PINMUX_IPSR_DATA(IP3_18_16, CTS0), + + PINMUX_IPSR_MSEL(IP3_20_19, SD1_DAT3_B, SEL_SD1_B), + PINMUX_IPSR_MSEL(IP3_20_19, HRTS0_A, SEL_HSCIF0_A), + PINMUX_IPSR_DATA(IP3_20_19, RTS0), + + PINMUX_IPSR_DATA(IP3_23_21, SSI_SCK4), + PINMUX_IPSR_DATA(IP3_23_21, DU0_DR0), + PINMUX_IPSR_DATA(IP3_23_21, LCDOUT0), + PINMUX_IPSR_DATA(IP3_23_21, AUDATA2), + PINMUX_IPSR_DATA(IP3_23_21, ARM_TRACEDATA_2), + PINMUX_IPSR_MSEL(IP3_23_21, SDA3_C, SEL_I2C3_C), + PINMUX_IPSR_DATA(IP3_23_21, ADICHS1), + PINMUX_IPSR_MSEL(IP3_23_21, TS_SDEN0_B, SEL_TSIF0_B), + + PINMUX_IPSR_DATA(IP3_26_24, SSI_WS4), + PINMUX_IPSR_DATA(IP3_26_24, DU0_DR1), + PINMUX_IPSR_DATA(IP3_26_24, LCDOUT1), + PINMUX_IPSR_DATA(IP3_26_24, AUDATA3), + PINMUX_IPSR_DATA(IP3_26_24, ARM_TRACEDATA_3), + PINMUX_IPSR_MSEL(IP3_26_24, SCL3_C, SEL_I2C3_C), + PINMUX_IPSR_DATA(IP3_26_24, ADICHS2), + PINMUX_IPSR_MSEL(IP3_26_24, TS_SPSYNC0_B, SEL_TSIF0_B), + + PINMUX_IPSR_DATA(IP3_27, DU0_DR2), + PINMUX_IPSR_DATA(IP3_27, LCDOUT2), + + PINMUX_IPSR_DATA(IP3_28, DU0_DR3), + PINMUX_IPSR_DATA(IP3_28, LCDOUT3), + + PINMUX_IPSR_DATA(IP3_29, DU0_DR4), + PINMUX_IPSR_DATA(IP3_29, LCDOUT4), + + PINMUX_IPSR_DATA(IP3_30, DU0_DR5), + PINMUX_IPSR_DATA(IP3_30, LCDOUT5), + + PINMUX_IPSR_DATA(IP3_31, DU0_DR6), + PINMUX_IPSR_DATA(IP3_31, LCDOUT6), + + /* IPSR4 */ + PINMUX_IPSR_DATA(IP4_0, DU0_DR7), + PINMUX_IPSR_DATA(IP4_0, LCDOUT7), + + PINMUX_IPSR_DATA(IP4_3_1, DU0_DG0), + PINMUX_IPSR_DATA(IP4_3_1, LCDOUT8), + PINMUX_IPSR_DATA(IP4_3_1, AUDATA4), + PINMUX_IPSR_DATA(IP4_3_1, ARM_TRACEDATA_4), + PINMUX_IPSR_DATA(IP4_3_1, TX1_D), + PINMUX_IPSR_DATA(IP4_3_1, CAN0_TX_A), + PINMUX_IPSR_DATA(IP4_3_1, ADICHS0), + + PINMUX_IPSR_DATA(IP4_6_4, DU0_DG1), + PINMUX_IPSR_DATA(IP4_6_4, LCDOUT9), + PINMUX_IPSR_DATA(IP4_6_4, AUDATA5), + PINMUX_IPSR_DATA(IP4_6_4, ARM_TRACEDATA_5), + PINMUX_IPSR_MSEL(IP4_6_4, RX1_D, SEL_SCIF1_D), + PINMUX_IPSR_MSEL(IP4_6_4, CAN0_RX_A, SEL_CAN0_A), + PINMUX_IPSR_DATA(IP4_6_4, ADIDATA), + + PINMUX_IPSR_DATA(IP4_7, DU0_DG2), + PINMUX_IPSR_DATA(IP4_7, LCDOUT10), + + PINMUX_IPSR_DATA(IP4_8, DU0_DG3), + PINMUX_IPSR_DATA(IP4_8, LCDOUT11), + + PINMUX_IPSR_DATA(IP4_10_9, DU0_DG4), + PINMUX_IPSR_DATA(IP4_10_9, LCDOUT12), + PINMUX_IPSR_MSEL(IP4_10_9, RX0_B, SEL_SCIF0_B), + + PINMUX_IPSR_DATA(IP4_12_11, DU0_DG5), + PINMUX_IPSR_DATA(IP4_12_11, LCDOUT13), + PINMUX_IPSR_DATA(IP4_12_11, TX0_B), + + PINMUX_IPSR_DATA(IP4_14_13, DU0_DG6), + PINMUX_IPSR_DATA(IP4_14_13, LCDOUT14), + PINMUX_IPSR_MSEL(IP4_14_13, RX4_A, SEL_SCIF4_A), + + PINMUX_IPSR_DATA(IP4_16_15, DU0_DG7), + PINMUX_IPSR_DATA(IP4_16_15, LCDOUT15), + PINMUX_IPSR_DATA(IP4_16_15, TX4_A), + + PINMUX_IPSR_MSEL(IP4_20_17, SSI_SCK2_B, SEL_SSI2_B), + PINMUX_DATA(VI0_R0_B_MARK, FN_IP4_20_17, FN_VI0_R0_B, FN_SEL_VI0_B), /* see sel_vi0 */ + PINMUX_DATA(VI0_R0_D_MARK, FN_IP4_20_17, FN_VI0_R0_B, FN_SEL_VI0_D), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP4_20_17, DU0_DB0), + PINMUX_IPSR_DATA(IP4_20_17, LCDOUT16), + PINMUX_IPSR_DATA(IP4_20_17, AUDATA6), + PINMUX_IPSR_DATA(IP4_20_17, ARM_TRACEDATA_6), + PINMUX_IPSR_MSEL(IP4_20_17, GPSCLK_A, SEL_GPS_A), + PINMUX_IPSR_DATA(IP4_20_17, PWM0_A), + PINMUX_IPSR_DATA(IP4_20_17, ADICLK), + PINMUX_IPSR_MSEL(IP4_20_17, TS_SDAT0_B, SEL_TSIF0_B), + + PINMUX_IPSR_DATA(IP4_24_21, AUDIO_CLKC), + PINMUX_DATA(VI0_R1_B_MARK, FN_IP4_24_21, FN_VI0_R1_B, FN_SEL_VI0_B), /* see sel_vi0 */ + PINMUX_DATA(VI0_R1_D_MARK, FN_IP4_24_21, FN_VI0_R1_B, FN_SEL_VI0_D), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP4_24_21, DU0_DB1), + PINMUX_IPSR_DATA(IP4_24_21, LCDOUT17), + PINMUX_IPSR_DATA(IP4_24_21, AUDATA7), + PINMUX_IPSR_DATA(IP4_24_21, ARM_TRACEDATA_7), + PINMUX_IPSR_MSEL(IP4_24_21, GPSIN_A, SEL_GPS_A), + PINMUX_IPSR_DATA(IP4_24_21, ADICS_SAMP), + PINMUX_IPSR_MSEL(IP4_24_21, TS_SCK0_B, SEL_TSIF0_B), + + PINMUX_DATA(VI0_R2_B_MARK, FN_IP4_26_25, FN_VI0_R2_B, FN_SEL_VI0_B), /* see sel_vi0 */ + PINMUX_DATA(VI0_R2_D_MARK, FN_IP4_26_25, FN_VI0_R2_B, FN_SEL_VI0_D), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP4_26_25, DU0_DB2), + PINMUX_IPSR_DATA(IP4_26_25, LCDOUT18), + + PINMUX_IPSR_MSEL(IP4_28_27, VI0_R3_B, SEL_VI0_B), + PINMUX_IPSR_DATA(IP4_28_27, DU0_DB3), + PINMUX_IPSR_DATA(IP4_28_27, LCDOUT19), + + PINMUX_DATA(VI0_R4_B_MARK, FN_IP4_30_29, FN_VI0_R4_B, FN_SEL_VI0_B), /* see sel_vi0 */ + PINMUX_DATA(VI0_R4_D_MARK, FN_IP4_30_29, FN_VI0_R4_B, FN_SEL_VI0_D), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP4_30_29, DU0_DB4), + PINMUX_IPSR_DATA(IP4_30_29, LCDOUT20), + + /* IPSR5 */ + PINMUX_DATA(VI0_R5_B_MARK, FN_IP5_1_0, FN_VI0_R5_B, FN_SEL_VI0_B), /* see sel_vi0 */ + PINMUX_DATA(VI0_R5_D_MARK, FN_IP5_1_0, FN_VI0_R5_B, FN_SEL_VI0_D), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP5_1_0, DU0_DB5), + PINMUX_IPSR_DATA(IP5_1_0, LCDOUT21), + + PINMUX_IPSR_MSEL(IP5_3_2, VI1_DATA10_B, SEL_VI1_B), + PINMUX_IPSR_DATA(IP5_3_2, DU0_DB6), + PINMUX_IPSR_DATA(IP5_3_2, LCDOUT22), + + PINMUX_IPSR_MSEL(IP5_5_4, VI1_DATA11_B, SEL_VI1_B), + PINMUX_IPSR_DATA(IP5_5_4, DU0_DB7), + PINMUX_IPSR_DATA(IP5_5_4, LCDOUT23), + + PINMUX_IPSR_DATA(IP5_6, DU0_DOTCLKIN), + PINMUX_IPSR_DATA(IP5_6, QSTVA_QVS), + + PINMUX_IPSR_DATA(IP5_7, DU0_DOTCLKO_UT0), + PINMUX_IPSR_DATA(IP5_7, QCLK), + + PINMUX_IPSR_DATA(IP5_9_8, DU0_DOTCLKO_UT1), + PINMUX_IPSR_DATA(IP5_9_8, QSTVB_QVE), + PINMUX_IPSR_DATA(IP5_9_8, AUDIO_CLKOUT_A), + PINMUX_IPSR_MSEL(IP5_9_8, REMOCON_C, SEL_REMOCON_C), + + PINMUX_IPSR_MSEL(IP5_11_10, SSI_WS2_B, SEL_SSI2_B), + PINMUX_IPSR_DATA(IP5_11_10, DU0_EXHSYNC_DU0_HSYNC), + PINMUX_IPSR_DATA(IP5_11_10, QSTH_QHS), + + PINMUX_IPSR_DATA(IP5_12, DU0_EXVSYNC_DU0_VSYNC), + PINMUX_IPSR_DATA(IP5_12, QSTB_QHE), + + PINMUX_IPSR_DATA(IP5_14_13, DU0_EXODDF_DU0_ODDF_DISP_CDE), + PINMUX_IPSR_DATA(IP5_14_13, QCPV_QDE), + PINMUX_IPSR_MSEL(IP5_14_13, FMCLK_D, SEL_FM_D), + + PINMUX_IPSR_MSEL(IP5_17_15, SSI_SCK1_A, SEL_SSI1_A), + PINMUX_IPSR_DATA(IP5_17_15, DU0_DISP), + PINMUX_IPSR_DATA(IP5_17_15, QPOLA), + PINMUX_IPSR_DATA(IP5_17_15, AUDCK), + PINMUX_IPSR_DATA(IP5_17_15, ARM_TRACECLK), + PINMUX_IPSR_DATA(IP5_17_15, BPFCLK_D), + + PINMUX_IPSR_MSEL(IP5_20_18, SSI_WS1_A, SEL_SSI1_A), + PINMUX_IPSR_DATA(IP5_20_18, DU0_CDE), + PINMUX_IPSR_DATA(IP5_20_18, QPOLB), + PINMUX_IPSR_DATA(IP5_20_18, AUDSYNC), + PINMUX_IPSR_DATA(IP5_20_18, ARM_TRACECTL), + PINMUX_IPSR_MSEL(IP5_20_18, FMIN_D, SEL_FM_D), + + PINMUX_IPSR_MSEL(IP5_22_21, SD1_CD_B, SEL_SD1_B), + PINMUX_IPSR_DATA(IP5_22_21, SSI_SCK78), + PINMUX_IPSR_MSEL(IP5_22_21, HSPI_RX0_B, SEL_HSPI0_B), + PINMUX_IPSR_DATA(IP5_22_21, TX1_B), + + PINMUX_IPSR_MSEL(IP5_25_23, SD1_WP_B, SEL_SD1_B), + PINMUX_IPSR_DATA(IP5_25_23, SSI_WS78), + PINMUX_IPSR_MSEL(IP5_25_23, HSPI_CLK0_B, SEL_HSPI0_B), + PINMUX_IPSR_MSEL(IP5_25_23, RX1_B, SEL_SCIF1_B), + PINMUX_IPSR_MSEL(IP5_25_23, CAN_CLK_D, SEL_CANCLK_D), + + PINMUX_IPSR_DATA(IP5_28_26, SSI_SDATA8), + PINMUX_IPSR_MSEL(IP5_28_26, SSI_SCK2_A, SEL_SSI2_A), + PINMUX_IPSR_MSEL(IP5_28_26, HSPI_CS0_B, SEL_HSPI0_B), + PINMUX_IPSR_DATA(IP5_28_26, TX2_A), + PINMUX_IPSR_DATA(IP5_28_26, CAN0_TX_B), + + PINMUX_IPSR_DATA(IP5_30_29, SSI_SDATA7), + PINMUX_IPSR_DATA(IP5_30_29, HSPI_TX0_B), + PINMUX_IPSR_MSEL(IP5_30_29, RX2_A, SEL_SCIF2_A), + PINMUX_IPSR_MSEL(IP5_30_29, CAN0_RX_B, SEL_CAN0_B), + + /* IPSR6 */ + PINMUX_IPSR_DATA(IP6_1_0, SSI_SCK6), + PINMUX_IPSR_MSEL(IP6_1_0, HSPI_RX2_A, SEL_HSPI2_A), + PINMUX_IPSR_MSEL(IP6_1_0, FMCLK_B, SEL_FM_B), + PINMUX_IPSR_DATA(IP6_1_0, CAN1_TX_B), + + PINMUX_IPSR_DATA(IP6_4_2, SSI_WS6), + PINMUX_IPSR_MSEL(IP6_4_2, HSPI_CLK2_A, SEL_HSPI2_A), + PINMUX_IPSR_DATA(IP6_4_2, BPFCLK_B), + PINMUX_IPSR_MSEL(IP6_4_2, CAN1_RX_B, SEL_CAN1_B), + + PINMUX_IPSR_DATA(IP6_6_5, SSI_SDATA6), + PINMUX_IPSR_DATA(IP6_6_5, HSPI_TX2_A), + PINMUX_IPSR_MSEL(IP6_6_5, FMIN_B, SEL_FM_B), + + PINMUX_IPSR_DATA(IP6_7, SSI_SCK5), + PINMUX_IPSR_MSEL(IP6_7, RX4_C, SEL_SCIF4_C), + + PINMUX_IPSR_DATA(IP6_8, SSI_WS5), + PINMUX_IPSR_DATA(IP6_8, TX4_C), + + PINMUX_IPSR_DATA(IP6_9, SSI_SDATA5), + PINMUX_IPSR_MSEL(IP6_9, RX0_D, SEL_SCIF0_D), + + PINMUX_IPSR_DATA(IP6_10, SSI_WS34), + PINMUX_IPSR_DATA(IP6_10, ARM_TRACEDATA_8), + + PINMUX_IPSR_DATA(IP6_12_11, SSI_SDATA4), + PINMUX_IPSR_MSEL(IP6_12_11, SSI_WS2_A, SEL_SSI2_A), + PINMUX_IPSR_DATA(IP6_12_11, ARM_TRACEDATA_9), + + PINMUX_IPSR_DATA(IP6_13, SSI_SDATA3), + PINMUX_IPSR_DATA(IP6_13, ARM_TRACEDATA_10), + + PINMUX_IPSR_DATA(IP6_15_14, SSI_SCK012), + PINMUX_IPSR_DATA(IP6_15_14, ARM_TRACEDATA_11), + PINMUX_IPSR_DATA(IP6_15_14, TX0_D), + + PINMUX_IPSR_DATA(IP6_16, SSI_WS012), + PINMUX_IPSR_DATA(IP6_16, ARM_TRACEDATA_12), + + PINMUX_IPSR_DATA(IP6_18_17, SSI_SDATA2), + PINMUX_IPSR_MSEL(IP6_18_17, HSPI_CS2_A, SEL_HSPI2_A), + PINMUX_IPSR_DATA(IP6_18_17, ARM_TRACEDATA_13), + PINMUX_IPSR_MSEL(IP6_18_17, SDA1_A, SEL_I2C1_A), + + PINMUX_IPSR_DATA(IP6_20_19, SSI_SDATA1), + PINMUX_IPSR_DATA(IP6_20_19, ARM_TRACEDATA_14), + PINMUX_IPSR_MSEL(IP6_20_19, SCL1_A, SEL_I2C1_A), + PINMUX_IPSR_MSEL(IP6_20_19, SCK2_A, SEL_SCIF2_A), + + PINMUX_IPSR_DATA(IP6_21, SSI_SDATA0), + PINMUX_IPSR_DATA(IP6_21, ARM_TRACEDATA_15), + + PINMUX_IPSR_DATA(IP6_23_22, SD0_CLK), + PINMUX_IPSR_DATA(IP6_23_22, SUB_TDO), + + PINMUX_IPSR_DATA(IP6_25_24, SD0_CMD), + PINMUX_IPSR_DATA(IP6_25_24, SUB_TRST), + + PINMUX_IPSR_DATA(IP6_27_26, SD0_DAT0), + PINMUX_IPSR_DATA(IP6_27_26, SUB_TMS), + + PINMUX_IPSR_DATA(IP6_29_28, SD0_DAT1), + PINMUX_IPSR_DATA(IP6_29_28, SUB_TCK), + + PINMUX_IPSR_DATA(IP6_31_30, SD0_DAT2), + PINMUX_IPSR_DATA(IP6_31_30, SUB_TDI), + + /* IPSR7 */ + PINMUX_IPSR_DATA(IP7_1_0, SD0_DAT3), + PINMUX_IPSR_MSEL(IP7_1_0, IRQ1_B, SEL_IRQ1_B), + + PINMUX_IPSR_DATA(IP7_3_2, SD0_CD), + PINMUX_IPSR_DATA(IP7_3_2, TX5_A), + + PINMUX_IPSR_DATA(IP7_5_4, SD0_WP), + PINMUX_IPSR_MSEL(IP7_5_4, RX5_A, SEL_SCIF5_A), + + PINMUX_IPSR_DATA(IP7_8_6, VI1_CLKENB), + PINMUX_IPSR_MSEL(IP7_8_6, HSPI_CLK0_A, SEL_HSPI0_A), + PINMUX_IPSR_DATA(IP7_8_6, HTX1_A), + PINMUX_IPSR_MSEL(IP7_8_6, RTS1_C, SEL_SCIF1_C), + + PINMUX_IPSR_DATA(IP7_11_9, VI1_FIELD), + PINMUX_IPSR_MSEL(IP7_11_9, HSPI_CS0_A, SEL_HSPI0_A), + PINMUX_IPSR_MSEL(IP7_11_9, HRX1_A, SEL_HSCIF1_A), + PINMUX_IPSR_MSEL(IP7_11_9, SCK1_C, SEL_SCIF1_C), + + PINMUX_IPSR_DATA(IP7_14_12, VI1_HSYNC), + PINMUX_IPSR_MSEL(IP7_14_12, HSPI_RX0_A, SEL_HSPI0_A), + PINMUX_IPSR_MSEL(IP7_14_12, HRTS1_A, SEL_HSCIF1_A), + PINMUX_IPSR_MSEL(IP7_14_12, FMCLK_A, SEL_FM_A), + PINMUX_IPSR_MSEL(IP7_14_12, RX1_C, SEL_SCIF1_C), + + PINMUX_IPSR_DATA(IP7_17_15, VI1_VSYNC), + PINMUX_IPSR_DATA(IP7_17_15, HSPI_TX0), + PINMUX_IPSR_MSEL(IP7_17_15, HCTS1_A, SEL_HSCIF1_A), + PINMUX_IPSR_DATA(IP7_17_15, BPFCLK_A), + PINMUX_IPSR_DATA(IP7_17_15, TX1_C), + + PINMUX_IPSR_DATA(IP7_20_18, TCLK0), + PINMUX_IPSR_MSEL(IP7_20_18, HSCK1_A, SEL_HSCIF1_A), + PINMUX_IPSR_MSEL(IP7_20_18, FMIN_A, SEL_FM_A), + PINMUX_IPSR_MSEL(IP7_20_18, IRQ2_C, SEL_IRQ2_C), + PINMUX_IPSR_MSEL(IP7_20_18, CTS1_C, SEL_SCIF1_C), + PINMUX_IPSR_DATA(IP7_20_18, SPEEDIN), + + PINMUX_IPSR_DATA(IP7_21, VI0_CLK), + PINMUX_IPSR_MSEL(IP7_21, CAN_CLK_A, SEL_CANCLK_A), + + PINMUX_IPSR_DATA(IP7_24_22, VI0_CLKENB), + PINMUX_IPSR_MSEL(IP7_24_22, SD2_DAT2_B, SEL_SD2_B), + PINMUX_IPSR_DATA(IP7_24_22, VI1_DATA0), + PINMUX_IPSR_DATA(IP7_24_22, DU1_DG6), + PINMUX_IPSR_MSEL(IP7_24_22, HSPI_RX1_A, SEL_HSPI1_A), + PINMUX_IPSR_MSEL(IP7_24_22, RX4_B, SEL_SCIF4_B), + + PINMUX_IPSR_DATA(IP7_28_25, VI0_FIELD), + PINMUX_IPSR_MSEL(IP7_28_25, SD2_DAT3_B, SEL_SD2_B), + PINMUX_DATA(VI0_R3_C_MARK, FN_IP7_28_25, FN_VI0_R3_C, FN_SEL_VI0_C), /* see sel_vi0 */ + PINMUX_DATA(VI0_R3_D_MARK, FN_IP7_28_25, FN_VI0_R3_C, FN_SEL_VI0_D), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP7_28_25, VI1_DATA1), + PINMUX_IPSR_DATA(IP7_28_25, DU1_DG7), + PINMUX_IPSR_MSEL(IP7_28_25, HSPI_CLK1_A, SEL_HSPI1_A), + PINMUX_IPSR_DATA(IP7_28_25, TX4_B), + + PINMUX_IPSR_DATA(IP7_31_29, VI0_HSYNC), + PINMUX_IPSR_MSEL(IP7_31_29, SD2_CD_B, SEL_SD2_B), + PINMUX_IPSR_DATA(IP7_31_29, VI1_DATA2), + PINMUX_IPSR_DATA(IP7_31_29, DU1_DR2), + PINMUX_IPSR_MSEL(IP7_31_29, HSPI_CS1_A, SEL_HSPI1_A), + PINMUX_IPSR_MSEL(IP7_31_29, RX3_B, SEL_SCIF3_B), + + /* IPSR8 */ + PINMUX_IPSR_DATA(IP8_2_0, VI0_VSYNC), + PINMUX_IPSR_MSEL(IP8_2_0, SD2_WP_B, SEL_SD2_B), + PINMUX_IPSR_DATA(IP8_2_0, VI1_DATA3), + PINMUX_IPSR_DATA(IP8_2_0, DU1_DR3), + PINMUX_IPSR_DATA(IP8_2_0, HSPI_TX1_A), + PINMUX_IPSR_DATA(IP8_2_0, TX3_B), + + PINMUX_IPSR_DATA(IP8_5_3, VI0_DATA0_VI0_B0), + PINMUX_IPSR_DATA(IP8_5_3, DU1_DG2), + PINMUX_IPSR_MSEL(IP8_5_3, IRQ2_B, SEL_IRQ2_B), + PINMUX_IPSR_MSEL(IP8_5_3, RX3_D, SEL_SCIF3_D), + + PINMUX_IPSR_DATA(IP8_8_6, VI0_DATA1_VI0_B1), + PINMUX_IPSR_DATA(IP8_8_6, DU1_DG3), + PINMUX_IPSR_MSEL(IP8_8_6, IRQ3_B, SEL_IRQ3_B), + PINMUX_IPSR_DATA(IP8_8_6, TX3_D), + + PINMUX_IPSR_DATA(IP8_10_9, VI0_DATA2_VI0_B2), + PINMUX_IPSR_DATA(IP8_10_9, DU1_DG4), + PINMUX_IPSR_MSEL(IP8_10_9, RX0_C, SEL_SCIF0_C), + + PINMUX_IPSR_DATA(IP8_13_11, VI0_DATA3_VI0_B3), + PINMUX_IPSR_DATA(IP8_13_11, DU1_DG5), + PINMUX_IPSR_DATA(IP8_13_11, TX1_A), + PINMUX_IPSR_DATA(IP8_13_11, TX0_C), + + PINMUX_IPSR_DATA(IP8_15_14, VI0_DATA4_VI0_B4), + PINMUX_IPSR_DATA(IP8_15_14, DU1_DB2), + PINMUX_IPSR_MSEL(IP8_15_14, RX1_A, SEL_SCIF1_A), + + PINMUX_IPSR_DATA(IP8_18_16, VI0_DATA5_VI0_B5), + PINMUX_IPSR_DATA(IP8_18_16, DU1_DB3), + PINMUX_IPSR_MSEL(IP8_18_16, SCK1_A, SEL_SCIF1_A), + PINMUX_IPSR_DATA(IP8_18_16, PWM4), + PINMUX_IPSR_MSEL(IP8_18_16, HSCK1_B, SEL_HSCIF1_B), + + PINMUX_IPSR_DATA(IP8_21_19, VI0_DATA6_VI0_G0), + PINMUX_IPSR_DATA(IP8_21_19, DU1_DB4), + PINMUX_IPSR_MSEL(IP8_21_19, CTS1_A, SEL_SCIF1_A), + PINMUX_IPSR_DATA(IP8_21_19, PWM5), + + PINMUX_IPSR_DATA(IP8_23_22, VI0_DATA7_VI0_G1), + PINMUX_IPSR_DATA(IP8_23_22, DU1_DB5), + PINMUX_IPSR_MSEL(IP8_23_22, RTS1_A, SEL_SCIF1_A), + + PINMUX_IPSR_DATA(IP8_26_24, VI0_G2), + PINMUX_IPSR_DATA(IP8_26_24, SD2_CLK_B), + PINMUX_IPSR_DATA(IP8_26_24, VI1_DATA4), + PINMUX_IPSR_DATA(IP8_26_24, DU1_DR4), + PINMUX_IPSR_DATA(IP8_26_24, HTX1_B), + + PINMUX_IPSR_DATA(IP8_29_27, VI0_G3), + PINMUX_IPSR_MSEL(IP8_29_27, SD2_CMD_B, SEL_SD2_B), + PINMUX_IPSR_DATA(IP8_29_27, VI1_DATA5), + PINMUX_IPSR_DATA(IP8_29_27, DU1_DR5), + PINMUX_IPSR_MSEL(IP8_29_27, HRX1_B, SEL_HSCIF1_B), + + /* IPSR9 */ + PINMUX_IPSR_DATA(IP9_2_0, VI0_G4), + PINMUX_IPSR_MSEL(IP9_2_0, SD2_DAT0_B, SEL_SD2_B), + PINMUX_IPSR_DATA(IP9_2_0, VI1_DATA6), + PINMUX_IPSR_DATA(IP9_2_0, DU1_DR6), + PINMUX_IPSR_MSEL(IP9_2_0, HRTS1_B, SEL_HSCIF1_B), + + PINMUX_IPSR_DATA(IP9_5_3, VI0_G5), + PINMUX_IPSR_MSEL(IP9_5_3, SD2_DAT1_B, SEL_SD2_B), + PINMUX_IPSR_DATA(IP9_5_3, VI1_DATA7), + PINMUX_IPSR_DATA(IP9_5_3, DU1_DR7), + PINMUX_IPSR_MSEL(IP9_5_3, HCTS1_B, SEL_HSCIF1_B), + + PINMUX_DATA(VI0_R0_A_MARK, FN_IP9_8_6, FN_VI0_R0_A, FN_SEL_VI0_A), /* see sel_vi0 */ + PINMUX_DATA(VI0_R0_C_MARK, FN_IP9_8_6, FN_VI0_R0_A, FN_SEL_VI0_C), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP9_8_6, VI1_CLK), + PINMUX_IPSR_DATA(IP9_8_6, ETH_REF_CLK), + PINMUX_IPSR_DATA(IP9_8_6, DU1_DOTCLKIN), + + PINMUX_DATA(VI0_R1_A_MARK, FN_IP9_11_9, FN_VI0_R1_A, FN_SEL_VI0_A), /* see sel_vi0 */ + PINMUX_DATA(VI0_R1_C_MARK, FN_IP9_11_9, FN_VI0_R1_A, FN_SEL_VI0_C), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP9_11_9, VI1_DATA8), + PINMUX_IPSR_DATA(IP9_11_9, DU1_DB6), + PINMUX_IPSR_DATA(IP9_11_9, ETH_TXD0), + PINMUX_IPSR_DATA(IP9_11_9, PWM2), + PINMUX_IPSR_DATA(IP9_11_9, TCLK1), + + PINMUX_DATA(VI0_R2_A_MARK, FN_IP9_14_12, FN_VI0_R2_A, FN_SEL_VI0_A), /* see sel_vi0 */ + PINMUX_DATA(VI0_R2_C_MARK, FN_IP9_14_12, FN_VI0_R2_A, FN_SEL_VI0_C), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP9_14_12, VI1_DATA9), + PINMUX_IPSR_DATA(IP9_14_12, DU1_DB7), + PINMUX_IPSR_DATA(IP9_14_12, ETH_TXD1), + PINMUX_IPSR_DATA(IP9_14_12, PWM3), + + PINMUX_IPSR_MSEL(IP9_17_15, VI0_R3_A, SEL_VI0_A), + PINMUX_IPSR_DATA(IP9_17_15, ETH_CRS_DV), + PINMUX_IPSR_DATA(IP9_17_15, IECLK), + PINMUX_IPSR_MSEL(IP9_17_15, SCK2_C, SEL_SCIF2_C), + + PINMUX_DATA(VI0_R4_A_MARK, FN_IP9_20_18, FN_VI0_R4_A, FN_SEL_VI0_A), /* see sel_vi0 */ + PINMUX_DATA(VI0_R3_C_MARK, FN_IP9_20_18, FN_VI0_R4_A, FN_SEL_VI0_C), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP9_20_18, ETH_TX_EN), + PINMUX_IPSR_DATA(IP9_20_18, IETX), + PINMUX_IPSR_DATA(IP9_20_18, TX2_C), + + PINMUX_DATA(VI0_R5_A_MARK, FN_IP9_23_21, FN_VI0_R5_A, FN_SEL_VI0_A), /* see sel_vi0 */ + PINMUX_DATA(VI0_R5_C_MARK, FN_IP9_23_21, FN_VI0_R5_A, FN_SEL_VI0_C), /* see sel_vi0 */ + PINMUX_IPSR_DATA(IP9_23_21, ETH_RX_ER), + PINMUX_IPSR_MSEL(IP9_23_21, FMCLK_C, SEL_FM_C), + PINMUX_IPSR_DATA(IP9_23_21, IERX), + PINMUX_IPSR_MSEL(IP9_23_21, RX2_C, SEL_SCIF2_C), + + PINMUX_IPSR_MSEL(IP9_26_24, VI1_DATA10_A, SEL_VI1_A), + PINMUX_IPSR_DATA(IP9_26_24, DU1_DOTCLKOUT), + PINMUX_IPSR_DATA(IP9_26_24, ETH_RXD0), + PINMUX_IPSR_DATA(IP9_26_24, BPFCLK_C), + PINMUX_IPSR_DATA(IP9_26_24, TX2_D), + PINMUX_IPSR_MSEL(IP9_26_24, SDA2_C, SEL_I2C2_C), + + PINMUX_IPSR_MSEL(IP9_29_27, VI1_DATA11_A, SEL_VI1_A), + PINMUX_IPSR_DATA(IP9_29_27, DU1_EXHSYNC_DU1_HSYNC), + PINMUX_IPSR_DATA(IP9_29_27, ETH_RXD1), + PINMUX_IPSR_MSEL(IP9_29_27, FMIN_C, SEL_FM_C), + PINMUX_IPSR_MSEL(IP9_29_27, RX2_D, SEL_SCIF2_D), + PINMUX_IPSR_MSEL(IP9_29_27, SCL2_C, SEL_I2C2_C), + + /* IPSR10 */ + PINMUX_IPSR_DATA(IP10_2_0, SD2_CLK_A), + PINMUX_IPSR_DATA(IP10_2_0, DU1_EXVSYNC_DU1_VSYNC), + PINMUX_IPSR_DATA(IP10_2_0, ATARD1), + PINMUX_IPSR_DATA(IP10_2_0, ETH_MDC), + PINMUX_IPSR_MSEL(IP10_2_0, SDA1_B, SEL_I2C1_B), + + PINMUX_IPSR_MSEL(IP10_5_3, SD2_CMD_A, SEL_SD2_A), + PINMUX_IPSR_DATA(IP10_5_3, DU1_EXODDF_DU1_ODDF_DISP_CDE), + PINMUX_IPSR_DATA(IP10_5_3, ATAWR1), + PINMUX_IPSR_DATA(IP10_5_3, ETH_MDIO), + PINMUX_IPSR_MSEL(IP10_5_3, SCL1_B, SEL_I2C1_B), + + PINMUX_IPSR_MSEL(IP10_8_6, SD2_DAT0_A, SEL_SD2_A), + PINMUX_IPSR_DATA(IP10_8_6, DU1_DISP), + PINMUX_IPSR_DATA(IP10_8_6, ATACS01), + PINMUX_IPSR_MSEL(IP10_8_6, DREQ1_B, SEL_DREQ1_B), + PINMUX_IPSR_DATA(IP10_8_6, ETH_LINK), + PINMUX_IPSR_MSEL(IP10_8_6, CAN1_RX_A, SEL_CAN1_A), + + PINMUX_IPSR_MSEL(IP10_12_9, SD2_DAT1_A, SEL_SD2_A), + PINMUX_IPSR_DATA(IP10_12_9, DU1_CDE), + PINMUX_IPSR_DATA(IP10_12_9, ATACS11), + PINMUX_IPSR_DATA(IP10_12_9, DACK1_B), + PINMUX_IPSR_DATA(IP10_12_9, ETH_MAGIC), + PINMUX_IPSR_DATA(IP10_12_9, CAN1_TX_A), + PINMUX_IPSR_DATA(IP10_12_9, PWM6), + + PINMUX_IPSR_MSEL(IP10_15_13, SD2_DAT2_A, SEL_SD2_A), + PINMUX_IPSR_DATA(IP10_15_13, VI1_DATA12), + PINMUX_IPSR_MSEL(IP10_15_13, DREQ2_B, SEL_DREQ2_B), + PINMUX_IPSR_DATA(IP10_15_13, ATADIR1), + PINMUX_IPSR_MSEL(IP10_15_13, HSPI_CLK2_B, SEL_HSPI2_B), + PINMUX_IPSR_MSEL(IP10_15_13, GPSCLK_B, SEL_GPS_B), + + PINMUX_IPSR_MSEL(IP10_18_16, SD2_DAT3_A, SEL_SD2_A), + PINMUX_IPSR_DATA(IP10_18_16, VI1_DATA13), + PINMUX_IPSR_DATA(IP10_18_16, DACK2_B), + PINMUX_IPSR_DATA(IP10_18_16, ATAG1), + PINMUX_IPSR_MSEL(IP10_18_16, HSPI_CS2_B, SEL_HSPI2_B), + PINMUX_IPSR_MSEL(IP10_18_16, GPSIN_B, SEL_GPS_B), + + PINMUX_IPSR_MSEL(IP10_21_19, SD2_CD_A, SEL_SD2_A), + PINMUX_IPSR_DATA(IP10_21_19, VI1_DATA14), + PINMUX_IPSR_MSEL(IP10_21_19, EX_WAIT1_B, SEL_WAIT1_B), + PINMUX_IPSR_MSEL(IP10_21_19, DREQ0_B, SEL_DREQ0_B), + PINMUX_IPSR_MSEL(IP10_21_19, HSPI_RX2_B, SEL_HSPI2_B), + PINMUX_IPSR_MSEL(IP10_21_19, REMOCON_A, SEL_REMOCON_A), + + PINMUX_IPSR_MSEL(IP10_24_22, SD2_WP_A, SEL_SD2_A), + PINMUX_IPSR_DATA(IP10_24_22, VI1_DATA15), + PINMUX_IPSR_MSEL(IP10_24_22, EX_WAIT2_B, SEL_WAIT2_B), + PINMUX_IPSR_DATA(IP10_24_22, DACK0_B), + PINMUX_IPSR_DATA(IP10_24_22, HSPI_TX2_B), + PINMUX_IPSR_MSEL(IP10_24_22, CAN_CLK_C, SEL_CANCLK_C), +}; + +static struct sh_pfc_pin pinmux_pins[] = { + PINMUX_GPIO_GP_ALL(), +}; + +/* Pin numbers for pins without a corresponding GPIO port number are computed + * from the row and column numbers with a 1000 offset to avoid collisions with + * GPIO port numbers. + */ +#define PIN_NUMBER(row, col) (1000+((row)-1)*25+(col)-1) + +/* - macro */ +#define SH_PFC_PINS(name, args...) \ + static const unsigned int name ##_pins[] = { args } +#define SH_PFC_MUX1(name, arg1) \ + static const unsigned int name ##_mux[] = { arg1##_MARK } +#define SH_PFC_MUX2(name, arg1, arg2) \ + static const unsigned int name ##_mux[] = { arg1##_MARK, arg2##_MARK, } +#define SH_PFC_MUX3(name, arg1, arg2, arg3) \ + static const unsigned int name ##_mux[] = { arg1##_MARK, arg2##_MARK, \ + arg3##_MARK } +#define SH_PFC_MUX4(name, arg1, arg2, arg3, arg4) \ + static const unsigned int name ##_mux[] = { arg1##_MARK, arg2##_MARK, \ + arg3##_MARK, arg4##_MARK } +#define SH_PFC_MUX8(name, arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8) \ + static const unsigned int name ##_mux[] = { arg1##_MARK, arg2##_MARK, \ + arg3##_MARK, arg4##_MARK, \ + arg5##_MARK, arg6##_MARK, \ + arg7##_MARK, arg8##_MARK, } + +/* - Ether ------------------------------------------------------------------ */ +SH_PFC_PINS(ether_rmii, RCAR_GP_PIN(4, 10), RCAR_GP_PIN(4, 11), + RCAR_GP_PIN(4, 13), RCAR_GP_PIN(4, 9), + RCAR_GP_PIN(4, 15), RCAR_GP_PIN(4, 16), + RCAR_GP_PIN(4, 12), RCAR_GP_PIN(4, 14), + RCAR_GP_PIN(4, 18), RCAR_GP_PIN(4, 17)); +static const unsigned int ether_rmii_mux[] = { + ETH_TXD0_MARK, ETH_TXD1_MARK, ETH_TX_EN_MARK, ETH_REF_CLK_MARK, + ETH_RXD0_MARK, ETH_RXD1_MARK, ETH_CRS_DV_MARK, ETH_RX_ER_MARK, + ETH_MDIO_MARK, ETH_MDC_MARK, +}; +SH_PFC_PINS(ether_link, RCAR_GP_PIN(4, 19)); +SH_PFC_MUX1(ether_link, ETH_LINK); +SH_PFC_PINS(ether_magic, RCAR_GP_PIN(4, 20)); +SH_PFC_MUX1(ether_magic, ETH_MAGIC); + +/* - SCIF macro ------------------------------------------------------------- */ +#define SCIF_PFC_PIN(name, args...) SH_PFC_PINS(name, args) +#define SCIF_PFC_DAT(name, tx, rx) SH_PFC_MUX2(name, tx, rx) +#define SCIF_PFC_CTR(name, cts, rts) SH_PFC_MUX2(name, cts, rts) +#define SCIF_PFC_CLK(name, sck) SH_PFC_MUX1(name, sck) + +/* - HSCIF0 ----------------------------------------------------------------- */ +SCIF_PFC_PIN(hscif0_data_a, RCAR_GP_PIN(1, 17), RCAR_GP_PIN(1, 18)); +SCIF_PFC_DAT(hscif0_data_a, HTX0_A, HRX0_A); +SCIF_PFC_PIN(hscif0_data_b, RCAR_GP_PIN(0, 29), RCAR_GP_PIN(0, 30)); +SCIF_PFC_DAT(hscif0_data_b, HTX0_B, HRX0_B); +SCIF_PFC_PIN(hscif0_ctrl_a, RCAR_GP_PIN(1, 20), RCAR_GP_PIN(1, 21)); +SCIF_PFC_CTR(hscif0_ctrl_a, HCTS0_A, HRTS0_A); +SCIF_PFC_PIN(hscif0_ctrl_b, RCAR_GP_PIN(0, 31), RCAR_GP_PIN(0, 28)); +SCIF_PFC_CTR(hscif0_ctrl_b, HCTS0_B, HRTS0_B); +SCIF_PFC_PIN(hscif0_clk, RCAR_GP_PIN(1, 19)); +SCIF_PFC_CLK(hscif0_clk, HSCK0); + +/* - HSCIF1 ----------------------------------------------------------------- */ +SCIF_PFC_PIN(hscif1_data_a, RCAR_GP_PIN(3, 19), RCAR_GP_PIN(3, 20)); +SCIF_PFC_DAT(hscif1_data_a, HTX1_A, HRX1_A); +SCIF_PFC_PIN(hscif1_data_b, RCAR_GP_PIN(4, 5), RCAR_GP_PIN(4, 6)); +SCIF_PFC_DAT(hscif1_data_b, HTX1_B, HRX1_B); +SCIF_PFC_PIN(hscif1_ctrl_a, RCAR_GP_PIN(3, 22), RCAR_GP_PIN(3, 21)); +SCIF_PFC_CTR(hscif1_ctrl_a, HCTS1_A, HRTS1_A); +SCIF_PFC_PIN(hscif1_ctrl_b, RCAR_GP_PIN(4, 8), RCAR_GP_PIN(4, 7)); +SCIF_PFC_CTR(hscif1_ctrl_b, HCTS1_B, HRTS1_B); +SCIF_PFC_PIN(hscif1_clk_a, RCAR_GP_PIN(3, 23)); +SCIF_PFC_CLK(hscif1_clk_a, HSCK1_A); +SCIF_PFC_PIN(hscif1_clk_b, RCAR_GP_PIN(4, 2)); +SCIF_PFC_CLK(hscif1_clk_b, HSCK1_B); + +/* - HSPI macro --------------------------------------------------------------*/ +#define HSPI_PFC_PIN(name, args...) SH_PFC_PINS(name, args) +#define HSPI_PFC_DAT(name, clk, cs, rx, tx) SH_PFC_MUX4(name, clk, cs, rx, tx) + +/* - HSPI0 -------------------------------------------------------------------*/ +HSPI_PFC_PIN(hspi0_a, RCAR_GP_PIN(3, 19), RCAR_GP_PIN(3, 20), + RCAR_GP_PIN(3, 21), RCAR_GP_PIN(3, 22)); +HSPI_PFC_DAT(hspi0_a, HSPI_CLK0_A, HSPI_CS0_A, + HSPI_RX0_A, HSPI_TX0); + +HSPI_PFC_PIN(hspi0_b, RCAR_GP_PIN(2, 25), RCAR_GP_PIN(2, 26), + RCAR_GP_PIN(2, 24), RCAR_GP_PIN(2, 27)); +HSPI_PFC_DAT(hspi0_b, HSPI_CLK0_B, HSPI_CS0_B, + HSPI_RX0_B, HSPI_TX0_B); + +/* - HSPI1 -------------------------------------------------------------------*/ +HSPI_PFC_PIN(hspi1_a, RCAR_GP_PIN(3, 26), RCAR_GP_PIN(3, 27), + RCAR_GP_PIN(3, 25), RCAR_GP_PIN(3, 28)); +HSPI_PFC_DAT(hspi1_a, HSPI_CLK1_A, HSPI_CS1_A, + HSPI_RX1_A, HSPI_TX1_A); + +HSPI_PFC_PIN(hspi1_b, RCAR_GP_PIN(0, 27), RCAR_GP_PIN(0, 26), + PIN_NUMBER(20, 1), PIN_NUMBER(25, 2)); +HSPI_PFC_DAT(hspi1_b, HSPI_CLK1_B, HSPI_CS1_B, + HSPI_RX1_B, HSPI_TX1_B); + +/* - HSPI2 -------------------------------------------------------------------*/ +HSPI_PFC_PIN(hspi2_a, RCAR_GP_PIN(2, 29), RCAR_GP_PIN(3, 8), + RCAR_GP_PIN(2, 28), RCAR_GP_PIN(2, 30)); +HSPI_PFC_DAT(hspi2_a, HSPI_CLK2_A, HSPI_CS2_A, + HSPI_RX2_A, HSPI_TX2_A); + +HSPI_PFC_PIN(hspi2_b, RCAR_GP_PIN(4, 21), RCAR_GP_PIN(4, 22), + RCAR_GP_PIN(4, 23), RCAR_GP_PIN(4, 24)); +HSPI_PFC_DAT(hspi2_b, HSPI_CLK2_B, HSPI_CS2_B, + HSPI_RX2_B, HSPI_TX2_B); + +/* - I2C macro ------------------------------------------------------------- */ +#define I2C_PFC_PIN(name, args...) SH_PFC_PINS(name, args) +#define I2C_PFC_MUX(name, sda, scl) SH_PFC_MUX2(name, sda, scl) + +/* - I2C1 ------------------------------------------------------------------ */ +I2C_PFC_PIN(i2c1_a, RCAR_GP_PIN(3, 8), RCAR_GP_PIN(3, 9)); +I2C_PFC_MUX(i2c1_a, SDA1_A, SCL1_A); +I2C_PFC_PIN(i2c1_b, RCAR_GP_PIN(4, 17), RCAR_GP_PIN(4, 18)); +I2C_PFC_MUX(i2c1_b, SDA1_B, SCL1_B); + +/* - I2C2 ------------------------------------------------------------------ */ +I2C_PFC_PIN(i2c2_a, PIN_NUMBER(3, 20), RCAR_GP_PIN(1, 3)); +I2C_PFC_MUX(i2c2_a, SDA2_A, SCL2_A); +I2C_PFC_PIN(i2c2_b, RCAR_GP_PIN(0, 3), RCAR_GP_PIN(0, 4)); +I2C_PFC_MUX(i2c2_b, SDA2_B, SCL2_B); +I2C_PFC_PIN(i2c2_c, RCAR_GP_PIN(4, 15), RCAR_GP_PIN(4, 16)); +I2C_PFC_MUX(i2c2_c, SDA2_C, SCL2_C); + +/* - I2C3 ------------------------------------------------------------------ */ +I2C_PFC_PIN(i2c3_a, RCAR_GP_PIN(1, 14), RCAR_GP_PIN(1, 15)); +I2C_PFC_MUX(i2c3_a, SDA3_A, SCL3_A); +I2C_PFC_PIN(i2c3_b, RCAR_GP_PIN(1, 16), RCAR_GP_PIN(1, 19)); +I2C_PFC_MUX(i2c3_b, SDA3_B, SCL3_B); +I2C_PFC_PIN(i2c3_c, RCAR_GP_PIN(1, 22), RCAR_GP_PIN(1, 23)); +I2C_PFC_MUX(i2c3_c, SDA3_C, SCL3_C); + +/* - MMC macro -------------------------------------------------------------- */ +#define MMC_PFC_PINS(name, args...) SH_PFC_PINS(name, args) +#define MMC_PFC_CTRL(name, clk, cmd) SH_PFC_MUX2(name, clk, cmd) +#define MMC_PFC_DAT1(name, d0) SH_PFC_MUX1(name, d0) +#define MMC_PFC_DAT4(name, d0, d1, d2, d3) SH_PFC_MUX4(name, d0, d1, d2, d3) +#define MMC_PFC_DAT8(name, d0, d1, d2, d3, d4, d5, d6, d7) \ + SH_PFC_MUX8(name, d0, d1, d2, d3, d4, d5, d6, d7) + +/* - MMC -------------------------------------------------------------------- */ +MMC_PFC_PINS(mmc_ctrl, RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 6)); +MMC_PFC_CTRL(mmc_ctrl, MMC_CLK, MMC_CMD); +MMC_PFC_PINS(mmc_data1, RCAR_GP_PIN(1, 7)); +MMC_PFC_DAT1(mmc_data1, MMC_D0); +MMC_PFC_PINS(mmc_data4, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(2, 8), + RCAR_GP_PIN(0, 5), RCAR_GP_PIN(0, 6)); +MMC_PFC_DAT4(mmc_data4, MMC_D0, MMC_D1, + MMC_D2, MMC_D3); +MMC_PFC_PINS(mmc_data8, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(2, 8), + RCAR_GP_PIN(0, 5), RCAR_GP_PIN(0, 6), + RCAR_GP_PIN(1, 4), RCAR_GP_PIN(1, 0), + RCAR_GP_PIN(0, 30), RCAR_GP_PIN(0, 31)); +MMC_PFC_DAT8(mmc_data8, MMC_D0, MMC_D1, + MMC_D2, MMC_D3, + MMC_D4, MMC_D5, + MMC_D6, MMC_D7); + +/* - SCIF CLOCK ------------------------------------------------------------- */ +SCIF_PFC_PIN(scif_clk, RCAR_GP_PIN(1, 16)); +SCIF_PFC_CLK(scif_clk, SCIF_CLK); + +/* - SCIF0 ------------------------------------------------------------------ */ +SCIF_PFC_PIN(scif0_data_a, RCAR_GP_PIN(1, 17), RCAR_GP_PIN(1, 18)); +SCIF_PFC_DAT(scif0_data_a, TX0_A, RX0_A); +SCIF_PFC_PIN(scif0_data_b, RCAR_GP_PIN(2, 3), RCAR_GP_PIN(2, 2)); +SCIF_PFC_DAT(scif0_data_b, TX0_B, RX0_B); +SCIF_PFC_PIN(scif0_data_c, RCAR_GP_PIN(4, 0), RCAR_GP_PIN(3, 31)); +SCIF_PFC_DAT(scif0_data_c, TX0_C, RX0_C); +SCIF_PFC_PIN(scif0_data_d, RCAR_GP_PIN(3, 6), RCAR_GP_PIN(3, 1)); +SCIF_PFC_DAT(scif0_data_d, TX0_D, RX0_D); +SCIF_PFC_PIN(scif0_ctrl, RCAR_GP_PIN(1, 20), RCAR_GP_PIN(1, 21)); +SCIF_PFC_CTR(scif0_ctrl, CTS0, RTS0); +SCIF_PFC_PIN(scif0_clk, RCAR_GP_PIN(1, 19)); +SCIF_PFC_CLK(scif0_clk, SCK0); + +/* - SCIF1 ------------------------------------------------------------------ */ +SCIF_PFC_PIN(scif1_data_a, RCAR_GP_PIN(4, 0), RCAR_GP_PIN(4, 1)); +SCIF_PFC_DAT(scif1_data_a, TX1_A, RX1_A); +SCIF_PFC_PIN(scif1_data_b, RCAR_GP_PIN(2, 24), RCAR_GP_PIN(2, 25)); +SCIF_PFC_DAT(scif1_data_b, TX1_B, RX1_B); +SCIF_PFC_PIN(scif1_data_c, RCAR_GP_PIN(3, 22), RCAR_GP_PIN(3, 21)); +SCIF_PFC_DAT(scif1_data_c, TX1_C, RX1_C); +SCIF_PFC_PIN(scif1_data_d, RCAR_GP_PIN(1, 30), RCAR_GP_PIN(1, 31)); +SCIF_PFC_DAT(scif1_data_d, TX1_D, RX1_D); +SCIF_PFC_PIN(scif1_ctrl_a, RCAR_GP_PIN(4, 3), RCAR_GP_PIN(4, 4)); +SCIF_PFC_CTR(scif1_ctrl_a, CTS1_A, RTS1_A); +SCIF_PFC_PIN(scif1_ctrl_c, RCAR_GP_PIN(3, 23), RCAR_GP_PIN(3, 19)); +SCIF_PFC_CTR(scif1_ctrl_c, CTS1_C, RTS1_C); +SCIF_PFC_PIN(scif1_clk_a, RCAR_GP_PIN(4, 2)); +SCIF_PFC_CLK(scif1_clk_a, SCK1_A); +SCIF_PFC_PIN(scif1_clk_c, RCAR_GP_PIN(3, 20)); +SCIF_PFC_CLK(scif1_clk_c, SCK1_C); + +/* - SCIF2 ------------------------------------------------------------------ */ +SCIF_PFC_PIN(scif2_data_a, RCAR_GP_PIN(2, 26), RCAR_GP_PIN(2, 27)); +SCIF_PFC_DAT(scif2_data_a, TX2_A, RX2_A); +SCIF_PFC_PIN(scif2_data_b, RCAR_GP_PIN(0, 29), RCAR_GP_PIN(0, 28)); +SCIF_PFC_DAT(scif2_data_b, TX2_B, RX2_B); +SCIF_PFC_PIN(scif2_data_c, RCAR_GP_PIN(4, 13), RCAR_GP_PIN(4, 14)); +SCIF_PFC_DAT(scif2_data_c, TX2_C, RX2_C); +SCIF_PFC_PIN(scif2_data_d, RCAR_GP_PIN(4, 15), RCAR_GP_PIN(4, 16)); +SCIF_PFC_DAT(scif2_data_d, TX2_D, RX2_D); +SCIF_PFC_PIN(scif2_data_e, RCAR_GP_PIN(0, 3), RCAR_GP_PIN(0, 4)); +SCIF_PFC_DAT(scif2_data_e, TX2_E, RX2_E); +SCIF_PFC_PIN(scif2_clk_a, RCAR_GP_PIN(3, 9)); +SCIF_PFC_CLK(scif2_clk_a, SCK2_A); +SCIF_PFC_PIN(scif2_clk_b, PIN_NUMBER(3, 20)); +SCIF_PFC_CLK(scif2_clk_b, SCK2_B); +SCIF_PFC_PIN(scif2_clk_c, RCAR_GP_PIN(4, 12)); +SCIF_PFC_CLK(scif2_clk_c, SCK2_C); + +/* - SCIF3 ------------------------------------------------------------------ */ +SCIF_PFC_PIN(scif3_data_a, RCAR_GP_PIN(1, 10), RCAR_GP_PIN(1, 9)); +SCIF_PFC_DAT(scif3_data_a, TX3_A, RX3_A); +SCIF_PFC_PIN(scif3_data_b, RCAR_GP_PIN(3, 28), RCAR_GP_PIN(3, 27)); +SCIF_PFC_DAT(scif3_data_b, TX3_B, RX3_B); +SCIF_PFC_PIN(scif3_data_c, RCAR_GP_PIN(1, 3), RCAR_GP_PIN(0, 31)); +SCIF_PFC_DAT(scif3_data_c, TX3_C, RX3_C); +SCIF_PFC_PIN(scif3_data_d, RCAR_GP_PIN(3, 30), RCAR_GP_PIN(3, 29)); +SCIF_PFC_DAT(scif3_data_d, TX3_D, RX3_D); + +/* - SCIF4 ------------------------------------------------------------------ */ +SCIF_PFC_PIN(scif4_data_a, RCAR_GP_PIN(2, 5), RCAR_GP_PIN(2, 4)); +SCIF_PFC_DAT(scif4_data_a, TX4_A, RX4_A); +SCIF_PFC_PIN(scif4_data_b, RCAR_GP_PIN(3, 26), RCAR_GP_PIN(3, 25)); +SCIF_PFC_DAT(scif4_data_b, TX4_B, RX4_B); +SCIF_PFC_PIN(scif4_data_c, RCAR_GP_PIN(3, 0), RCAR_GP_PIN(2, 31)); +SCIF_PFC_DAT(scif4_data_c, TX4_C, RX4_C); + +/* - SCIF5 ------------------------------------------------------------------ */ +SCIF_PFC_PIN(scif5_data_a, RCAR_GP_PIN(3, 17), RCAR_GP_PIN(3, 18)); +SCIF_PFC_DAT(scif5_data_a, TX5_A, RX5_A); +SCIF_PFC_PIN(scif5_data_b, RCAR_GP_PIN(1, 15), RCAR_GP_PIN(1, 14)); +SCIF_PFC_DAT(scif5_data_b, TX5_B, RX5_B); + +/* - SDHI macro ------------------------------------------------------------- */ +#define SDHI_PFC_PINS(name, args...) SH_PFC_PINS(name, args) +#define SDHI_PFC_DAT1(name, d0) SH_PFC_MUX1(name, d0) +#define SDHI_PFC_DAT4(name, d0, d1, d2, d3) SH_PFC_MUX4(name, d0, d1, d2, d3) +#define SDHI_PFC_CTRL(name, clk, cmd) SH_PFC_MUX2(name, clk, cmd) +#define SDHI_PFC_CDPN(name, cd) SH_PFC_MUX1(name, cd) +#define SDHI_PFC_WPPN(name, wp) SH_PFC_MUX1(name, wp) + +/* - SDHI0 ------------------------------------------------------------------ */ +SDHI_PFC_PINS(sdhi0_cd, RCAR_GP_PIN(3, 17)); +SDHI_PFC_CDPN(sdhi0_cd, SD0_CD); +SDHI_PFC_PINS(sdhi0_ctrl, RCAR_GP_PIN(3, 11), RCAR_GP_PIN(3, 12)); +SDHI_PFC_CTRL(sdhi0_ctrl, SD0_CLK, SD0_CMD); +SDHI_PFC_PINS(sdhi0_data1, RCAR_GP_PIN(3, 13)); +SDHI_PFC_DAT1(sdhi0_data1, SD0_DAT0); +SDHI_PFC_PINS(sdhi0_data4, RCAR_GP_PIN(3, 13), RCAR_GP_PIN(3, 14), + RCAR_GP_PIN(3, 15), RCAR_GP_PIN(3, 16)); +SDHI_PFC_DAT4(sdhi0_data4, SD0_DAT0, SD0_DAT1, + SD0_DAT2, SD0_DAT3); +SDHI_PFC_PINS(sdhi0_wp, RCAR_GP_PIN(3, 18)); +SDHI_PFC_WPPN(sdhi0_wp, SD0_WP); + +/* - SDHI1 ------------------------------------------------------------------ */ +SDHI_PFC_PINS(sdhi1_cd_a, RCAR_GP_PIN(0, 30)); +SDHI_PFC_CDPN(sdhi1_cd_a, SD1_CD_A); +SDHI_PFC_PINS(sdhi1_cd_b, RCAR_GP_PIN(2, 24)); +SDHI_PFC_CDPN(sdhi1_cd_b, SD1_CD_B); +SDHI_PFC_PINS(sdhi1_ctrl_a, RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 6)); +SDHI_PFC_CTRL(sdhi1_ctrl_a, SD1_CLK_A, SD1_CMD_A); +SDHI_PFC_PINS(sdhi1_ctrl_b, RCAR_GP_PIN(1, 17), RCAR_GP_PIN(1, 16)); +SDHI_PFC_CTRL(sdhi1_ctrl_b, SD1_CLK_B, SD1_CMD_B); +SDHI_PFC_PINS(sdhi1_data1_a, RCAR_GP_PIN(1, 7)); +SDHI_PFC_DAT1(sdhi1_data1_a, SD1_DAT0_A); +SDHI_PFC_PINS(sdhi1_data1_b, RCAR_GP_PIN(1, 18)); +SDHI_PFC_DAT1(sdhi1_data1_b, SD1_DAT0_B); +SDHI_PFC_PINS(sdhi1_data4_a, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(1, 8), + RCAR_GP_PIN(0, 5), RCAR_GP_PIN(0, 6)); +SDHI_PFC_DAT4(sdhi1_data4_a, SD1_DAT0_A, SD1_DAT1_A, + SD1_DAT2_A, SD1_DAT3_A); +SDHI_PFC_PINS(sdhi1_data4_b, RCAR_GP_PIN(1, 18), RCAR_GP_PIN(1, 19), + RCAR_GP_PIN(1, 20), RCAR_GP_PIN(1, 21)); +SDHI_PFC_DAT4(sdhi1_data4_b, SD1_DAT0_B, SD1_DAT1_B, + SD1_DAT2_B, SD1_DAT3_B); +SDHI_PFC_PINS(sdhi1_wp_a, RCAR_GP_PIN(0, 31)); +SDHI_PFC_WPPN(sdhi1_wp_a, SD1_WP_A); +SDHI_PFC_PINS(sdhi1_wp_b, RCAR_GP_PIN(2, 25)); +SDHI_PFC_WPPN(sdhi1_wp_b, SD1_WP_B); + +/* - SDH2 ------------------------------------------------------------------- */ +SDHI_PFC_PINS(sdhi2_cd_a, RCAR_GP_PIN(4, 23)); +SDHI_PFC_CDPN(sdhi2_cd_a, SD2_CD_A); +SDHI_PFC_PINS(sdhi2_cd_b, RCAR_GP_PIN(3, 27)); +SDHI_PFC_CDPN(sdhi2_cd_b, SD2_CD_B); +SDHI_PFC_PINS(sdhi2_ctrl_a, RCAR_GP_PIN(4, 17), RCAR_GP_PIN(4, 18)); +SDHI_PFC_CTRL(sdhi2_ctrl_a, SD2_CLK_A, SD2_CMD_A); +SDHI_PFC_PINS(sdhi2_ctrl_b, RCAR_GP_PIN(4, 5), RCAR_GP_PIN(4, 6)); +SDHI_PFC_CTRL(sdhi2_ctrl_b, SD2_CLK_B, SD2_CMD_B); +SDHI_PFC_PINS(sdhi2_data1_a, RCAR_GP_PIN(4, 19)); +SDHI_PFC_DAT1(sdhi2_data1_a, SD2_DAT0_A); +SDHI_PFC_PINS(sdhi2_data1_b, RCAR_GP_PIN(4, 7)); +SDHI_PFC_DAT1(sdhi2_data1_b, SD2_DAT0_B); +SDHI_PFC_PINS(sdhi2_data4_a, RCAR_GP_PIN(4, 19), RCAR_GP_PIN(4, 20), + RCAR_GP_PIN(4, 21), RCAR_GP_PIN(4, 22)); +SDHI_PFC_DAT4(sdhi2_data4_a, SD2_DAT0_A, SD2_DAT1_A, + SD2_DAT2_A, SD2_DAT3_A); +SDHI_PFC_PINS(sdhi2_data4_b, RCAR_GP_PIN(4, 7), RCAR_GP_PIN(4, 8), + RCAR_GP_PIN(3, 25), RCAR_GP_PIN(3, 26)); +SDHI_PFC_DAT4(sdhi2_data4_b, SD2_DAT0_B, SD2_DAT1_B, + SD2_DAT2_B, SD2_DAT3_B); +SDHI_PFC_PINS(sdhi2_wp_a, RCAR_GP_PIN(4, 24)); +SDHI_PFC_WPPN(sdhi2_wp_a, SD2_WP_A); +SDHI_PFC_PINS(sdhi2_wp_b, RCAR_GP_PIN(3, 28)); +SDHI_PFC_WPPN(sdhi2_wp_b, SD2_WP_B); + +/* - USB0 ------------------------------------------------------------------- */ +SH_PFC_PINS(usb0, RCAR_GP_PIN(0, 1)); +SH_PFC_MUX1(usb0, PENC0); +SH_PFC_PINS(usb0_ovc, RCAR_GP_PIN(0, 3)); +SH_PFC_MUX1(usb0_ovc, USB_OVC0); + +/* - USB1 ------------------------------------------------------------------- */ +SH_PFC_PINS(usb1, RCAR_GP_PIN(0, 2)); +SH_PFC_MUX1(usb1, PENC1); +SH_PFC_PINS(usb1_ovc, RCAR_GP_PIN(0, 4)); +SH_PFC_MUX1(usb1_ovc, USB_OVC1); + +/* - VIN macros ------------------------------------------------------------- */ +#define VIN_PFC_PINS(name, args...) SH_PFC_PINS(name, args) +#define VIN_PFC_DAT8(name, d0, d1, d2, d3, d4, d5, d6, d7) \ + SH_PFC_MUX8(name, d0, d1, d2, d3, d4, d5, d6, d7) +#define VIN_PFC_CLK(name, clk) SH_PFC_MUX1(name, clk) +#define VIN_PFC_SYNC(name, hsync, vsync) SH_PFC_MUX2(name, hsync, vsync) + +/* - VIN0 ------------------------------------------------------------------- */ +VIN_PFC_PINS(vin0_data8, RCAR_GP_PIN(3, 29), RCAR_GP_PIN(3, 30), + RCAR_GP_PIN(3, 31), RCAR_GP_PIN(4, 0), + RCAR_GP_PIN(4, 1), RCAR_GP_PIN(4, 2), + RCAR_GP_PIN(4, 3), RCAR_GP_PIN(4, 4)); +VIN_PFC_DAT8(vin0_data8, VI0_DATA0_VI0_B0, VI0_DATA1_VI0_B1, + VI0_DATA2_VI0_B2, VI0_DATA3_VI0_B3, + VI0_DATA4_VI0_B4, VI0_DATA5_VI0_B5, + VI0_DATA6_VI0_G0, VI0_DATA7_VI0_G1); +VIN_PFC_PINS(vin0_clk, RCAR_GP_PIN(3, 24)); +VIN_PFC_CLK(vin0_clk, VI0_CLK); +VIN_PFC_PINS(vin0_sync, RCAR_GP_PIN(3, 27), RCAR_GP_PIN(3, 28)); +VIN_PFC_SYNC(vin0_sync, VI0_HSYNC, VI0_VSYNC); +/* - VIN1 ------------------------------------------------------------------- */ +VIN_PFC_PINS(vin1_data8, RCAR_GP_PIN(3, 25), RCAR_GP_PIN(3, 26), + RCAR_GP_PIN(3, 27), RCAR_GP_PIN(3, 28), + RCAR_GP_PIN(4, 5), RCAR_GP_PIN(4, 6), + RCAR_GP_PIN(4, 7), RCAR_GP_PIN(4, 8)); +VIN_PFC_DAT8(vin1_data8, VI1_DATA0, VI1_DATA1, + VI1_DATA2, VI1_DATA3, + VI1_DATA4, VI1_DATA5, + VI1_DATA6, VI1_DATA7); +VIN_PFC_PINS(vin1_clk, RCAR_GP_PIN(4, 9)); +VIN_PFC_CLK(vin1_clk, VI1_CLK); +VIN_PFC_PINS(vin1_sync, RCAR_GP_PIN(3, 21), RCAR_GP_PIN(3, 22)); +VIN_PFC_SYNC(vin1_sync, VI1_HSYNC, VI1_VSYNC); + +static const struct sh_pfc_pin_group pinmux_groups[] = { + SH_PFC_PIN_GROUP(ether_rmii), + SH_PFC_PIN_GROUP(ether_link), + SH_PFC_PIN_GROUP(ether_magic), + SH_PFC_PIN_GROUP(hscif0_data_a), + SH_PFC_PIN_GROUP(hscif0_data_b), + SH_PFC_PIN_GROUP(hscif0_ctrl_a), + SH_PFC_PIN_GROUP(hscif0_ctrl_b), + SH_PFC_PIN_GROUP(hscif0_clk), + SH_PFC_PIN_GROUP(hscif1_data_a), + SH_PFC_PIN_GROUP(hscif1_data_b), + SH_PFC_PIN_GROUP(hscif1_ctrl_a), + SH_PFC_PIN_GROUP(hscif1_ctrl_b), + SH_PFC_PIN_GROUP(hscif1_clk_a), + SH_PFC_PIN_GROUP(hscif1_clk_b), + SH_PFC_PIN_GROUP(hspi0_a), + SH_PFC_PIN_GROUP(hspi0_b), + SH_PFC_PIN_GROUP(hspi1_a), + SH_PFC_PIN_GROUP(hspi1_b), + SH_PFC_PIN_GROUP(hspi2_a), + SH_PFC_PIN_GROUP(hspi2_b), + SH_PFC_PIN_GROUP(i2c1_a), + SH_PFC_PIN_GROUP(i2c1_b), + SH_PFC_PIN_GROUP(i2c2_a), + SH_PFC_PIN_GROUP(i2c2_b), + SH_PFC_PIN_GROUP(i2c2_c), + SH_PFC_PIN_GROUP(i2c3_a), + SH_PFC_PIN_GROUP(i2c3_b), + SH_PFC_PIN_GROUP(i2c3_c), + SH_PFC_PIN_GROUP(mmc_ctrl), + SH_PFC_PIN_GROUP(mmc_data1), + SH_PFC_PIN_GROUP(mmc_data4), + SH_PFC_PIN_GROUP(mmc_data8), + SH_PFC_PIN_GROUP(scif_clk), + SH_PFC_PIN_GROUP(scif0_data_a), + SH_PFC_PIN_GROUP(scif0_data_b), + SH_PFC_PIN_GROUP(scif0_data_c), + SH_PFC_PIN_GROUP(scif0_data_d), + SH_PFC_PIN_GROUP(scif0_ctrl), + SH_PFC_PIN_GROUP(scif0_clk), + SH_PFC_PIN_GROUP(scif1_data_a), + SH_PFC_PIN_GROUP(scif1_data_b), + SH_PFC_PIN_GROUP(scif1_data_c), + SH_PFC_PIN_GROUP(scif1_data_d), + SH_PFC_PIN_GROUP(scif1_ctrl_a), + SH_PFC_PIN_GROUP(scif1_ctrl_c), + SH_PFC_PIN_GROUP(scif1_clk_a), + SH_PFC_PIN_GROUP(scif1_clk_c), + SH_PFC_PIN_GROUP(scif2_data_a), + SH_PFC_PIN_GROUP(scif2_data_b), + SH_PFC_PIN_GROUP(scif2_data_c), + SH_PFC_PIN_GROUP(scif2_data_d), + SH_PFC_PIN_GROUP(scif2_data_e), + SH_PFC_PIN_GROUP(scif2_clk_a), + SH_PFC_PIN_GROUP(scif2_clk_b), + SH_PFC_PIN_GROUP(scif2_clk_c), + SH_PFC_PIN_GROUP(scif3_data_a), + SH_PFC_PIN_GROUP(scif3_data_b), + SH_PFC_PIN_GROUP(scif3_data_c), + SH_PFC_PIN_GROUP(scif3_data_d), + SH_PFC_PIN_GROUP(scif4_data_a), + SH_PFC_PIN_GROUP(scif4_data_b), + SH_PFC_PIN_GROUP(scif4_data_c), + SH_PFC_PIN_GROUP(scif5_data_a), + SH_PFC_PIN_GROUP(scif5_data_b), + SH_PFC_PIN_GROUP(sdhi0_cd), + SH_PFC_PIN_GROUP(sdhi0_ctrl), + SH_PFC_PIN_GROUP(sdhi0_data1), + SH_PFC_PIN_GROUP(sdhi0_data4), + SH_PFC_PIN_GROUP(sdhi0_wp), + SH_PFC_PIN_GROUP(sdhi1_cd_a), + SH_PFC_PIN_GROUP(sdhi1_cd_b), + SH_PFC_PIN_GROUP(sdhi1_ctrl_a), + SH_PFC_PIN_GROUP(sdhi1_ctrl_b), + SH_PFC_PIN_GROUP(sdhi1_data1_a), + SH_PFC_PIN_GROUP(sdhi1_data1_b), + SH_PFC_PIN_GROUP(sdhi1_data4_a), + SH_PFC_PIN_GROUP(sdhi1_data4_b), + SH_PFC_PIN_GROUP(sdhi1_wp_a), + SH_PFC_PIN_GROUP(sdhi1_wp_b), + SH_PFC_PIN_GROUP(sdhi2_cd_a), + SH_PFC_PIN_GROUP(sdhi2_cd_b), + SH_PFC_PIN_GROUP(sdhi2_ctrl_a), + SH_PFC_PIN_GROUP(sdhi2_ctrl_b), + SH_PFC_PIN_GROUP(sdhi2_data1_a), + SH_PFC_PIN_GROUP(sdhi2_data1_b), + SH_PFC_PIN_GROUP(sdhi2_data4_a), + SH_PFC_PIN_GROUP(sdhi2_data4_b), + SH_PFC_PIN_GROUP(sdhi2_wp_a), + SH_PFC_PIN_GROUP(sdhi2_wp_b), + SH_PFC_PIN_GROUP(usb0), + SH_PFC_PIN_GROUP(usb0_ovc), + SH_PFC_PIN_GROUP(usb1), + SH_PFC_PIN_GROUP(usb1_ovc), + SH_PFC_PIN_GROUP(vin0_data8), + SH_PFC_PIN_GROUP(vin0_clk), + SH_PFC_PIN_GROUP(vin0_sync), + SH_PFC_PIN_GROUP(vin1_data8), + SH_PFC_PIN_GROUP(vin1_clk), + SH_PFC_PIN_GROUP(vin1_sync), +}; + +static const char * const ether_groups[] = { + "ether_rmii", + "ether_link", + "ether_magic", +}; + +static const char * const hscif0_groups[] = { + "hscif0_data_a", + "hscif0_data_b", + "hscif0_ctrl_a", + "hscif0_ctrl_b", + "hscif0_clk", +}; + +static const char * const hscif1_groups[] = { + "hscif1_data_a", + "hscif1_data_b", + "hscif1_ctrl_a", + "hscif1_ctrl_b", + "hscif1_clk_a", + "hscif1_clk_b", +}; + +static const char * const hspi0_groups[] = { + "hspi0_a", + "hspi0_b", +}; + +static const char * const hspi1_groups[] = { + "hspi1_a", + "hspi1_b", +}; + +static const char * const hspi2_groups[] = { + "hspi2_a", + "hspi2_b", +}; + +static const char * const i2c1_groups[] = { + "i2c1_a", + "i2c1_b", +}; + +static const char * const i2c2_groups[] = { + "i2c2_a", + "i2c2_b", + "i2c2_c", +}; + +static const char * const i2c3_groups[] = { + "i2c3_a", + "i2c3_b", + "i2c3_c", +}; + +static const char * const mmc_groups[] = { + "mmc_ctrl", + "mmc_data1", + "mmc_data4", + "mmc_data8", +}; + +static const char * const scif_clk_groups[] = { + "scif_clk", +}; + +static const char * const scif0_groups[] = { + "scif0_data_a", + "scif0_data_b", + "scif0_data_c", + "scif0_data_d", + "scif0_ctrl", + "scif0_clk", +}; + +static const char * const scif1_groups[] = { + "scif1_data_a", + "scif1_data_b", + "scif1_data_c", + "scif1_data_d", + "scif1_ctrl_a", + "scif1_ctrl_c", + "scif1_clk_a", + "scif1_clk_c", +}; + +static const char * const scif2_groups[] = { + "scif2_data_a", + "scif2_data_b", + "scif2_data_c", + "scif2_data_d", + "scif2_data_e", + "scif2_clk_a", + "scif2_clk_b", + "scif2_clk_c", +}; + +static const char * const scif3_groups[] = { + "scif3_data_a", + "scif3_data_b", + "scif3_data_c", + "scif3_data_d", +}; + +static const char * const scif4_groups[] = { + "scif4_data_a", + "scif4_data_b", + "scif4_data_c", +}; + +static const char * const scif5_groups[] = { + "scif5_data_a", + "scif5_data_b", +}; + + +static const char * const sdhi0_groups[] = { + "sdhi0_cd", + "sdhi0_ctrl", + "sdhi0_data1", + "sdhi0_data4", + "sdhi0_wp", +}; + +static const char * const sdhi1_groups[] = { + "sdhi1_cd_a", + "sdhi1_cd_b", + "sdhi1_ctrl_a", + "sdhi1_ctrl_b", + "sdhi1_data1_a", + "sdhi1_data1_b", + "sdhi1_data4_a", + "sdhi1_data4_b", + "sdhi1_wp_a", + "sdhi1_wp_b", +}; + +static const char * const sdhi2_groups[] = { + "sdhi2_cd_a", + "sdhi2_cd_b", + "sdhi2_ctrl_a", + "sdhi2_ctrl_b", + "sdhi2_data1_a", + "sdhi2_data1_b", + "sdhi2_data4_a", + "sdhi2_data4_b", + "sdhi2_wp_a", + "sdhi2_wp_b", +}; + +static const char * const usb0_groups[] = { + "usb0", + "usb0_ovc", +}; + +static const char * const usb1_groups[] = { + "usb1", + "usb1_ovc", +}; + +static const char * const vin0_groups[] = { + "vin0_data8", + "vin0_clk", + "vin0_sync", +}; + +static const char * const vin1_groups[] = { + "vin1_data8", + "vin1_clk", + "vin1_sync", +}; + +static const struct sh_pfc_function pinmux_functions[] = { + SH_PFC_FUNCTION(ether), + SH_PFC_FUNCTION(hscif0), + SH_PFC_FUNCTION(hscif1), + SH_PFC_FUNCTION(hspi0), + SH_PFC_FUNCTION(hspi1), + SH_PFC_FUNCTION(hspi2), + SH_PFC_FUNCTION(i2c1), + SH_PFC_FUNCTION(i2c2), + SH_PFC_FUNCTION(i2c3), + SH_PFC_FUNCTION(mmc), + SH_PFC_FUNCTION(scif_clk), + SH_PFC_FUNCTION(scif0), + SH_PFC_FUNCTION(scif1), + SH_PFC_FUNCTION(scif2), + SH_PFC_FUNCTION(scif3), + SH_PFC_FUNCTION(scif4), + SH_PFC_FUNCTION(scif5), + SH_PFC_FUNCTION(sdhi0), + SH_PFC_FUNCTION(sdhi1), + SH_PFC_FUNCTION(sdhi2), + SH_PFC_FUNCTION(usb0), + SH_PFC_FUNCTION(usb1), + SH_PFC_FUNCTION(vin0), + SH_PFC_FUNCTION(vin1), +}; + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + { PINMUX_CFG_REG("GPSR0", 0xfffc0004, 32, 1) { + GP_0_31_FN, FN_IP1_14_11, + GP_0_30_FN, FN_IP1_10_8, + GP_0_29_FN, FN_IP1_7_5, + GP_0_28_FN, FN_IP1_4_2, + GP_0_27_FN, FN_IP1_1, + GP_0_26_FN, FN_IP1_0, + GP_0_25_FN, FN_IP0_30, + GP_0_24_FN, FN_IP0_29, + GP_0_23_FN, FN_IP0_28, + GP_0_22_FN, FN_IP0_27, + GP_0_21_FN, FN_IP0_26, + GP_0_20_FN, FN_IP0_25, + GP_0_19_FN, FN_IP0_24, + GP_0_18_FN, FN_IP0_23, + GP_0_17_FN, FN_IP0_22, + GP_0_16_FN, FN_IP0_21, + GP_0_15_FN, FN_IP0_20, + GP_0_14_FN, FN_IP0_19, + GP_0_13_FN, FN_IP0_18, + GP_0_12_FN, FN_IP0_17, + GP_0_11_FN, FN_IP0_16, + GP_0_10_FN, FN_IP0_15, + GP_0_9_FN, FN_A3, + GP_0_8_FN, FN_A2, + GP_0_7_FN, FN_A1, + GP_0_6_FN, FN_IP0_14_12, + GP_0_5_FN, FN_IP0_11_8, + GP_0_4_FN, FN_IP0_7_5, + GP_0_3_FN, FN_IP0_4_2, + GP_0_2_FN, FN_PENC1, + GP_0_1_FN, FN_PENC0, + GP_0_0_FN, FN_IP0_1_0 } + }, + { PINMUX_CFG_REG("GPSR1", 0xfffc0008, 32, 1) { + GP_1_31_FN, FN_IP4_6_4, + GP_1_30_FN, FN_IP4_3_1, + GP_1_29_FN, FN_IP4_0, + GP_1_28_FN, FN_IP3_31, + GP_1_27_FN, FN_IP3_30, + GP_1_26_FN, FN_IP3_29, + GP_1_25_FN, FN_IP3_28, + GP_1_24_FN, FN_IP3_27, + GP_1_23_FN, FN_IP3_26_24, + GP_1_22_FN, FN_IP3_23_21, + GP_1_21_FN, FN_IP3_20_19, + GP_1_20_FN, FN_IP3_18_16, + GP_1_19_FN, FN_IP3_15_13, + GP_1_18_FN, FN_IP3_12_10, + GP_1_17_FN, FN_IP3_9_8, + GP_1_16_FN, FN_IP3_7_5, + GP_1_15_FN, FN_IP3_4_2, + GP_1_14_FN, FN_IP3_1_0, + GP_1_13_FN, FN_IP2_31, + GP_1_12_FN, FN_IP2_30, + GP_1_11_FN, FN_IP2_17, + GP_1_10_FN, FN_IP2_16_14, + GP_1_9_FN, FN_IP2_13_12, + GP_1_8_FN, FN_IP2_11_9, + GP_1_7_FN, FN_IP2_8_6, + GP_1_6_FN, FN_IP2_5_3, + GP_1_5_FN, FN_IP2_2_0, + GP_1_4_FN, FN_IP1_29_28, + GP_1_3_FN, FN_IP1_27_25, + GP_1_2_FN, FN_IP1_24, + GP_1_1_FN, FN_WE0, + GP_1_0_FN, FN_IP1_23_21 } + }, + { PINMUX_CFG_REG("GPSR2", 0xfffc000c, 32, 1) { + GP_2_31_FN, FN_IP6_7, + GP_2_30_FN, FN_IP6_6_5, + GP_2_29_FN, FN_IP6_4_2, + GP_2_28_FN, FN_IP6_1_0, + GP_2_27_FN, FN_IP5_30_29, + GP_2_26_FN, FN_IP5_28_26, + GP_2_25_FN, FN_IP5_25_23, + GP_2_24_FN, FN_IP5_22_21, + GP_2_23_FN, FN_AUDIO_CLKB, + GP_2_22_FN, FN_AUDIO_CLKA, + GP_2_21_FN, FN_IP5_20_18, + GP_2_20_FN, FN_IP5_17_15, + GP_2_19_FN, FN_IP5_14_13, + GP_2_18_FN, FN_IP5_12, + GP_2_17_FN, FN_IP5_11_10, + GP_2_16_FN, FN_IP5_9_8, + GP_2_15_FN, FN_IP5_7, + GP_2_14_FN, FN_IP5_6, + GP_2_13_FN, FN_IP5_5_4, + GP_2_12_FN, FN_IP5_3_2, + GP_2_11_FN, FN_IP5_1_0, + GP_2_10_FN, FN_IP4_30_29, + GP_2_9_FN, FN_IP4_28_27, + GP_2_8_FN, FN_IP4_26_25, + GP_2_7_FN, FN_IP4_24_21, + GP_2_6_FN, FN_IP4_20_17, + GP_2_5_FN, FN_IP4_16_15, + GP_2_4_FN, FN_IP4_14_13, + GP_2_3_FN, FN_IP4_12_11, + GP_2_2_FN, FN_IP4_10_9, + GP_2_1_FN, FN_IP4_8, + GP_2_0_FN, FN_IP4_7 } + }, + { PINMUX_CFG_REG("GPSR3", 0xfffc0010, 32, 1) { + GP_3_31_FN, FN_IP8_10_9, + GP_3_30_FN, FN_IP8_8_6, + GP_3_29_FN, FN_IP8_5_3, + GP_3_28_FN, FN_IP8_2_0, + GP_3_27_FN, FN_IP7_31_29, + GP_3_26_FN, FN_IP7_28_25, + GP_3_25_FN, FN_IP7_24_22, + GP_3_24_FN, FN_IP7_21, + GP_3_23_FN, FN_IP7_20_18, + GP_3_22_FN, FN_IP7_17_15, + GP_3_21_FN, FN_IP7_14_12, + GP_3_20_FN, FN_IP7_11_9, + GP_3_19_FN, FN_IP7_8_6, + GP_3_18_FN, FN_IP7_5_4, + GP_3_17_FN, FN_IP7_3_2, + GP_3_16_FN, FN_IP7_1_0, + GP_3_15_FN, FN_IP6_31_30, + GP_3_14_FN, FN_IP6_29_28, + GP_3_13_FN, FN_IP6_27_26, + GP_3_12_FN, FN_IP6_25_24, + GP_3_11_FN, FN_IP6_23_22, + GP_3_10_FN, FN_IP6_21, + GP_3_9_FN, FN_IP6_20_19, + GP_3_8_FN, FN_IP6_18_17, + GP_3_7_FN, FN_IP6_16, + GP_3_6_FN, FN_IP6_15_14, + GP_3_5_FN, FN_IP6_13, + GP_3_4_FN, FN_IP6_12_11, + GP_3_3_FN, FN_IP6_10, + GP_3_2_FN, FN_SSI_SCK34, + GP_3_1_FN, FN_IP6_9, + GP_3_0_FN, FN_IP6_8 } + }, + { PINMUX_CFG_REG("GPSR4", 0xfffc0014, 32, 1) { + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + GP_4_26_FN, FN_AVS2, + GP_4_25_FN, FN_AVS1, + GP_4_24_FN, FN_IP10_24_22, + GP_4_23_FN, FN_IP10_21_19, + GP_4_22_FN, FN_IP10_18_16, + GP_4_21_FN, FN_IP10_15_13, + GP_4_20_FN, FN_IP10_12_9, + GP_4_19_FN, FN_IP10_8_6, + GP_4_18_FN, FN_IP10_5_3, + GP_4_17_FN, FN_IP10_2_0, + GP_4_16_FN, FN_IP9_29_27, + GP_4_15_FN, FN_IP9_26_24, + GP_4_14_FN, FN_IP9_23_21, + GP_4_13_FN, FN_IP9_20_18, + GP_4_12_FN, FN_IP9_17_15, + GP_4_11_FN, FN_IP9_14_12, + GP_4_10_FN, FN_IP9_11_9, + GP_4_9_FN, FN_IP9_8_6, + GP_4_8_FN, FN_IP9_5_3, + GP_4_7_FN, FN_IP9_2_0, + GP_4_6_FN, FN_IP8_29_27, + GP_4_5_FN, FN_IP8_26_24, + GP_4_4_FN, FN_IP8_23_22, + GP_4_3_FN, FN_IP8_21_19, + GP_4_2_FN, FN_IP8_18_16, + GP_4_1_FN, FN_IP8_15_14, + GP_4_0_FN, FN_IP8_13_11 } + }, + + { PINMUX_CFG_REG_VAR("IPSR0", 0xfffc0020, 32, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 3, 4, 3, 3, 2) { + /* IP0_31 [1] */ + 0, 0, + /* IP0_30 [1] */ + FN_A19, 0, + /* IP0_29 [1] */ + FN_A18, 0, + /* IP0_28 [1] */ + FN_A17, 0, + /* IP0_27 [1] */ + FN_A16, 0, + /* IP0_26 [1] */ + FN_A15, 0, + /* IP0_25 [1] */ + FN_A14, 0, + /* IP0_24 [1] */ + FN_A13, 0, + /* IP0_23 [1] */ + FN_A12, 0, + /* IP0_22 [1] */ + FN_A11, 0, + /* IP0_21 [1] */ + FN_A10, 0, + /* IP0_20 [1] */ + FN_A9, 0, + /* IP0_19 [1] */ + FN_A8, 0, + /* IP0_18 [1] */ + FN_A7, 0, + /* IP0_17 [1] */ + FN_A6, 0, + /* IP0_16 [1] */ + FN_A5, 0, + /* IP0_15 [1] */ + FN_A4, 0, + /* IP0_14_12 [3] */ + FN_SD1_DAT3_A, FN_MMC_D3, 0, FN_A0, + FN_ATAG0_A, 0, FN_REMOCON_B, 0, + /* IP0_11_8 [4] */ + FN_SD1_DAT2_A, FN_MMC_D2, 0, FN_BS, + FN_ATADIR0_A, 0, FN_SDSELF_B, 0, + FN_PWM4_B, 0, 0, 0, + 0, 0, 0, 0, + /* IP0_7_5 [3] */ + FN_AUDATA1, FN_ARM_TRACEDATA_1, FN_GPSIN_C, FN_USB_OVC1, + FN_RX2_E, FN_SCL2_B, 0, 0, + /* IP0_4_2 [3] */ + FN_AUDATA0, FN_ARM_TRACEDATA_0, FN_GPSCLK_C, FN_USB_OVC0, + FN_TX2_E, FN_SDA2_B, 0, 0, + /* IP0_1_0 [2] */ + FN_PRESETOUT, 0, FN_PWM1, 0, + } + }, + { PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32, + 1, 1, 2, 3, 1, 3, 3, 1, 2, 4, 3, 3, 3, 1, 1) { + /* IP1_31 [1] */ + 0, 0, + /* IP1_30 [1] */ + 0, 0, + /* IP1_29_28 [2] */ + FN_EX_CS1, FN_MMC_D4, 0, 0, + /* IP1_27_25 [3] */ + FN_SSI_WS1_B, FN_EX_CS0, FN_SCL2_A, FN_TX3_C, + FN_TS_SCK0_A, 0, 0, 0, + /* IP1_24 [1] */ + FN_WE1, FN_ATAWR0_B, + /* IP1_23_21 [3] */ + FN_MMC_D5, FN_ATADIR0_B, 0, FN_RD_WR, + 0, 0, 0, 0, + /* IP1_20_18 [3] */ + FN_SSI_SCK1_B, FN_ATAG0_B, FN_CS1_A26, FN_SDA2_A, + FN_SCK2_B, 0, 0, 0, + /* IP1_17 [1] */ + FN_CS0, FN_HSPI_RX1_B, + /* IP1_16_15 [2] */ + FN_CLKOUT, FN_HSPI_TX1_B, FN_PWM0_B, 0, + /* IP1_14_11 [4] */ + FN_SD1_WP_A, FN_MMC_D7, 0, FN_A25, + FN_DACK1_A, 0, FN_HCTS0_B, FN_RX3_C, + FN_TS_SDAT0_A, 0, 0, 0, + 0, 0, 0, 0, + /* IP1_10_8 [3] */ + FN_SD1_CLK_B, FN_MMC_D6, 0, FN_A24, + FN_DREQ1_A, 0, FN_HRX0_B, FN_TS_SPSYNC0_A, + /* IP1_7_5 [3] */ + FN_A23, FN_HTX0_B, FN_TX2_B, FN_DACK2_A, + FN_TS_SDEN0_A, 0, 0, 0, + /* IP1_4_2 [3] */ + FN_A22, FN_HRTS0_B, FN_RX2_B, FN_DREQ2_A, + 0, 0, 0, 0, + /* IP1_1 [1] */ + FN_A21, FN_HSPI_CLK1_B, + /* IP1_0 [1] */ + FN_A20, FN_HSPI_CS1_B, + } + }, + { PINMUX_CFG_REG_VAR("IPSR2", 0xfffc0028, 32, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 3, 2, 3, 3, 3, 3) { + /* IP2_31 [1] */ + FN_MLB_CLK, FN_IRQ1_A, + /* IP2_30 [1] */ + FN_RD_WR_B, FN_IRQ0, + /* IP2_29 [1] */ + FN_D11, 0, + /* IP2_28 [1] */ + FN_D10, 0, + /* IP2_27 [1] */ + FN_D9, 0, + /* IP2_26 [1] */ + FN_D8, 0, + /* IP2_25 [1] */ + FN_D7, 0, + /* IP2_24 [1] */ + FN_D6, 0, + /* IP2_23 [1] */ + FN_D5, 0, + /* IP2_22 [1] */ + FN_D4, 0, + /* IP2_21 [1] */ + FN_D3, 0, + /* IP2_20 [1] */ + FN_D2, 0, + /* IP2_19 [1] */ + FN_D1, 0, + /* IP2_18 [1] */ + FN_D0, 0, + /* IP2_17 [1] */ + FN_EX_WAIT0, FN_PWM0_C, + /* IP2_16_14 [3] */ + FN_DACK0, 0, 0, FN_TX3_A, + FN_DRACK0, 0, 0, 0, + /* IP2_13_12 [2] */ + FN_DREQ0_A, 0, 0, FN_RX3_A, + /* IP2_11_9 [3] */ + FN_SD1_DAT1_A, FN_MMC_D1, 0, FN_ATAWR0_A, + FN_EX_CS5, FN_EX_WAIT2_A, 0, 0, + /* IP2_8_6 [3] */ + FN_SD1_DAT0_A, FN_MMC_D0, 0, FN_ATARD0, + FN_EX_CS4, FN_EX_WAIT1_A, 0, 0, + /* IP2_5_3 [3] */ + FN_SD1_CMD_A, FN_MMC_CMD, 0, FN_ATACS10, + FN_EX_CS3, 0, 0, 0, + /* IP2_2_0 [3] */ + FN_SD1_CLK_A, FN_MMC_CLK, 0, FN_ATACS00, + FN_EX_CS2, 0, 0, 0, + } + }, + { PINMUX_CFG_REG_VAR("IPSR3", 0xfffc002c, 32, + 1, 1, 1, 1, 1, 3, 3, 2, + 3, 3, 3, 2, 3, 3, 2) { + /* IP3_31 [1] */ + FN_DU0_DR6, FN_LCDOUT6, + /* IP3_30 [1] */ + FN_DU0_DR5, FN_LCDOUT5, + /* IP3_29 [1] */ + FN_DU0_DR4, FN_LCDOUT4, + /* IP3_28 [1] */ + FN_DU0_DR3, FN_LCDOUT3, + /* IP3_27 [1] */ + FN_DU0_DR2, FN_LCDOUT2, + /* IP3_26_24 [3] */ + FN_SSI_WS4, FN_DU0_DR1, FN_LCDOUT1, FN_AUDATA3, + FN_ARM_TRACEDATA_3, FN_SCL3_C, FN_ADICHS2, FN_TS_SPSYNC0_B, + /* IP3_23_21 [3] */ + FN_SSI_SCK4, FN_DU0_DR0, FN_LCDOUT0, FN_AUDATA2, + FN_ARM_TRACEDATA_2, FN_SDA3_C, FN_ADICHS1, FN_TS_SDEN0_B, + /* IP3_20_19 [2] */ + FN_SD1_DAT3_B, FN_HRTS0_A, FN_RTS0, 0, + /* IP3_18_16 [3] */ + FN_SD1_DAT2_B, FN_HCTS0_A, FN_CTS0, 0, + 0, 0, 0, 0, + /* IP3_15_13 [3] */ + FN_SD1_DAT1_B, FN_HSCK0, FN_SCK0, FN_SCL3_B, + 0, 0, 0, 0, + /* IP3_12_10 [3] */ + FN_SD1_DAT0_B, FN_HRX0_A, FN_RX0_A, 0, + 0, 0, 0, 0, + /* IP3_9_8 [2] */ + FN_SD1_CLK_B, FN_HTX0_A, FN_TX0_A, 0, + /* IP3_7_5 [3] */ + FN_SD1_CMD_B, FN_SCIF_CLK, FN_AUDIO_CLKOUT_B, FN_CAN_CLK_B, + FN_SDA3_B, 0, 0, 0, + /* IP3_4_2 [3] */ + FN_MLB_DAT, FN_TX5_B, FN_SCL3_A, FN_IRQ3_A, + FN_SDSELF_B, 0, 0, 0, + /* IP3_1_0 [2] */ + FN_MLB_SIG, FN_RX5_B, FN_SDA3_A, FN_IRQ2_A, + } + }, + { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, + 1, 2, 2, 2, 4, 4, 2, 2, 2, 2, 1, 1, 3, 3, 1) { + /* IP4_31 [1] */ + 0, 0, + /* IP4_30_29 [2] */ + FN_VI0_R4_B, FN_DU0_DB4, FN_LCDOUT20, 0, + /* IP4_28_27 [2] */ + FN_VI0_R3_B, FN_DU0_DB3, FN_LCDOUT19, 0, + /* IP4_26_25 [2] */ + FN_VI0_R2_B, FN_DU0_DB2, FN_LCDOUT18, 0, + /* IP4_24_21 [4] */ + FN_AUDIO_CLKC, FN_VI0_R1_B, FN_DU0_DB1, FN_LCDOUT17, + FN_AUDATA7, FN_ARM_TRACEDATA_7, FN_GPSIN_A, 0, + FN_ADICS_SAMP, FN_TS_SCK0_B, 0, 0, + 0, 0, 0, 0, + /* IP4_20_17 [4] */ + FN_SSI_SCK2_B, FN_VI0_R0_B, FN_DU0_DB0, FN_LCDOUT16, + FN_AUDATA6, FN_ARM_TRACEDATA_6, FN_GPSCLK_A, FN_PWM0_A, + FN_ADICLK, FN_TS_SDAT0_B, 0, 0, + 0, 0, 0, 0, + /* IP4_16_15 [2] */ + FN_DU0_DG7, FN_LCDOUT15, FN_TX4_A, 0, + /* IP4_14_13 [2] */ + FN_DU0_DG6, FN_LCDOUT14, FN_RX4_A, 0, + /* IP4_12_11 [2] */ + FN_DU0_DG5, FN_LCDOUT13, FN_TX0_B, 0, + /* IP4_10_9 [2] */ + FN_DU0_DG4, FN_LCDOUT12, FN_RX0_B, 0, + /* IP4_8 [1] */ + FN_DU0_DG3, FN_LCDOUT11, + /* IP4_7 [1] */ + FN_DU0_DG2, FN_LCDOUT10, + /* IP4_6_4 [3] */ + FN_DU0_DG1, FN_LCDOUT9, FN_AUDATA5, FN_ARM_TRACEDATA_5, + FN_RX1_D, FN_CAN0_RX_A, FN_ADIDATA, 0, + /* IP4_3_1 [3] */ + FN_DU0_DG0, FN_LCDOUT8, FN_AUDATA4, FN_ARM_TRACEDATA_4, + FN_TX1_D, FN_CAN0_TX_A, FN_ADICHS0, 0, + /* IP4_0 [1] */ + FN_DU0_DR7, FN_LCDOUT7, + } + }, + { PINMUX_CFG_REG_VAR("IPSR5", 0xfffc0034, 32, + 1, 2, 3, 3, 2, 3, 3, 2, 1, 2, 2, 1, 1, 2, 2, 2) { + + /* IP5_31 [1] */ + 0, 0, + /* IP5_30_29 [2] */ + FN_SSI_SDATA7, FN_HSPI_TX0_B, FN_RX2_A, FN_CAN0_RX_B, + /* IP5_28_26 [3] */ + FN_SSI_SDATA8, FN_SSI_SCK2_A, FN_HSPI_CS0_B, FN_TX2_A, + FN_CAN0_TX_B, 0, 0, 0, + /* IP5_25_23 [3] */ + FN_SD1_WP_B, FN_SSI_WS78, FN_HSPI_CLK0_B, FN_RX1_B, + FN_CAN_CLK_D, 0, 0, 0, + /* IP5_22_21 [2] */ + FN_SD1_CD_B, FN_SSI_SCK78, FN_HSPI_RX0_B, FN_TX1_B, + /* IP5_20_18 [3] */ + FN_SSI_WS1_A, FN_DU0_CDE, FN_QPOLB, FN_AUDSYNC, + FN_ARM_TRACECTL, FN_FMIN_D, 0, 0, + /* IP5_17_15 [3] */ + FN_SSI_SCK1_A, FN_DU0_DISP, FN_QPOLA, FN_AUDCK, + FN_ARM_TRACECLK, FN_BPFCLK_D, 0, 0, + /* IP5_14_13 [2] */ + FN_DU0_EXODDF_DU0_ODDF_DISP_CDE, FN_QCPV_QDE, + FN_FMCLK_D, 0, + /* IP5_12 [1] */ + FN_DU0_EXVSYNC_DU0_VSYNC, FN_QSTB_QHE, + /* IP5_11_10 [2] */ + FN_SSI_WS2_B, FN_DU0_EXHSYNC_DU0_HSYNC, + FN_QSTH_QHS, 0, + /* IP5_9_8 [2] */ + FN_DU0_DOTCLKO_UT1, FN_QSTVB_QVE, + FN_AUDIO_CLKOUT_A, FN_REMOCON_C, + /* IP5_7 [1] */ + FN_DU0_DOTCLKO_UT0, FN_QCLK, + /* IP5_6 [1] */ + FN_DU0_DOTCLKIN, FN_QSTVA_QVS, + /* IP5_5_4 [2] */ + FN_VI1_DATA11_B, FN_DU0_DB7, FN_LCDOUT23, 0, + /* IP5_3_2 [2] */ + FN_VI1_DATA10_B, FN_DU0_DB6, FN_LCDOUT22, 0, + /* IP5_1_0 [2] */ + FN_VI0_R5_B, FN_DU0_DB5, FN_LCDOUT21, 0, + } + }, + { PINMUX_CFG_REG_VAR("IPSR6", 0xfffc0038, 32, + 2, 2, 2, 2, 2, 1, 2, 2, 1, 2, + 1, 2, 1, 1, 1, 1, 2, 3, 2) { + /* IP6_31_30 [2] */ + FN_SD0_DAT2, 0, FN_SUB_TDI, 0, + /* IP6_29_28 [2] */ + FN_SD0_DAT1, 0, FN_SUB_TCK, 0, + /* IP6_27_26 [2] */ + FN_SD0_DAT0, 0, FN_SUB_TMS, 0, + /* IP6_25_24 [2] */ + FN_SD0_CMD, 0, FN_SUB_TRST, 0, + /* IP6_23_22 [2] */ + FN_SD0_CLK, 0, FN_SUB_TDO, 0, + /* IP6_21 [1] */ + FN_SSI_SDATA0, FN_ARM_TRACEDATA_15, + /* IP6_20_19 [2] */ + FN_SSI_SDATA1, FN_ARM_TRACEDATA_14, + FN_SCL1_A, FN_SCK2_A, + /* IP6_18_17 [2] */ + FN_SSI_SDATA2, FN_HSPI_CS2_A, + FN_ARM_TRACEDATA_13, FN_SDA1_A, + /* IP6_16 [1] */ + FN_SSI_WS012, FN_ARM_TRACEDATA_12, + /* IP6_15_14 [2] */ + FN_SSI_SCK012, FN_ARM_TRACEDATA_11, + FN_TX0_D, 0, + /* IP6_13 [1] */ + FN_SSI_SDATA3, FN_ARM_TRACEDATA_10, + /* IP6_12_11 [2] */ + FN_SSI_SDATA4, FN_SSI_WS2_A, + FN_ARM_TRACEDATA_9, 0, + /* IP6_10 [1] */ + FN_SSI_WS34, FN_ARM_TRACEDATA_8, + /* IP6_9 [1] */ + FN_SSI_SDATA5, FN_RX0_D, + /* IP6_8 [1] */ + FN_SSI_WS5, FN_TX4_C, + /* IP6_7 [1] */ + FN_SSI_SCK5, FN_RX4_C, + /* IP6_6_5 [2] */ + FN_SSI_SDATA6, FN_HSPI_TX2_A, + FN_FMIN_B, 0, + /* IP6_4_2 [3] */ + FN_SSI_WS6, FN_HSPI_CLK2_A, + FN_BPFCLK_B, FN_CAN1_RX_B, + 0, 0, 0, 0, + /* IP6_1_0 [2] */ + FN_SSI_SCK6, FN_HSPI_RX2_A, + FN_FMCLK_B, FN_CAN1_TX_B, + } + }, + { PINMUX_CFG_REG_VAR("IPSR7", 0xfffc003c, 32, + 3, 4, 3, 1, 3, 3, 3, 3, 3, 2, 2, 2) { + + /* IP7_31_29 [3] */ + FN_VI0_HSYNC, FN_SD2_CD_B, FN_VI1_DATA2, FN_DU1_DR2, + 0, FN_HSPI_CS1_A, FN_RX3_B, 0, + /* IP7_28_25 [4] */ + FN_VI0_FIELD, FN_SD2_DAT3_B, FN_VI0_R3_C, FN_VI1_DATA1, + FN_DU1_DG7, 0, FN_HSPI_CLK1_A, FN_TX4_B, + 0, 0, 0, 0, + 0, 0, 0, 0, + /* IP7_24_22 [3] */ + FN_VI0_CLKENB, FN_SD2_DAT2_B, FN_VI1_DATA0, FN_DU1_DG6, + 0, FN_HSPI_RX1_A, FN_RX4_B, 0, + /* IP7_21 [1] */ + FN_VI0_CLK, FN_CAN_CLK_A, + /* IP7_20_18 [3] */ + FN_TCLK0, FN_HSCK1_A, FN_FMIN_A, 0, + FN_IRQ2_C, FN_CTS1_C, FN_SPEEDIN, 0, + /* IP7_17_15 [3] */ + FN_VI1_VSYNC, FN_HSPI_TX0, FN_HCTS1_A, FN_BPFCLK_A, + 0, FN_TX1_C, 0, 0, + /* IP7_14_12 [3] */ + FN_VI1_HSYNC, FN_HSPI_RX0_A, FN_HRTS1_A, FN_FMCLK_A, + 0, FN_RX1_C, 0, 0, + /* IP7_11_9 [3] */ + FN_VI1_FIELD, FN_HSPI_CS0_A, FN_HRX1_A, 0, + FN_SCK1_C, 0, 0, 0, + /* IP7_8_6 [3] */ + FN_VI1_CLKENB, FN_HSPI_CLK0_A, FN_HTX1_A, 0, + FN_RTS1_C, 0, 0, 0, + /* IP7_5_4 [2] */ + FN_SD0_WP, 0, FN_RX5_A, 0, + /* IP7_3_2 [2] */ + FN_SD0_CD, 0, FN_TX5_A, 0, + /* IP7_1_0 [2] */ + FN_SD0_DAT3, 0, FN_IRQ1_B, 0, + } + }, + { PINMUX_CFG_REG_VAR("IPSR8", 0xfffc0040, 32, + 1, 1, 3, 3, 2, 3, 3, 2, 3, 2, 3, 3, 3) { + /* IP8_31 [1] */ + 0, 0, + /* IP8_30 [1] */ + 0, 0, + /* IP8_29_27 [3] */ + FN_VI0_G3, FN_SD2_CMD_B, FN_VI1_DATA5, FN_DU1_DR5, + 0, FN_HRX1_B, 0, 0, + /* IP8_26_24 [3] */ + FN_VI0_G2, FN_SD2_CLK_B, FN_VI1_DATA4, FN_DU1_DR4, + 0, FN_HTX1_B, 0, 0, + /* IP8_23_22 [2] */ + FN_VI0_DATA7_VI0_G1, FN_DU1_DB5, + FN_RTS1_A, 0, + /* IP8_21_19 [3] */ + FN_VI0_DATA6_VI0_G0, FN_DU1_DB4, + FN_CTS1_A, FN_PWM5, + 0, 0, 0, 0, + /* IP8_18_16 [3] */ + FN_VI0_DATA5_VI0_B5, FN_DU1_DB3, FN_SCK1_A, FN_PWM4, + 0, FN_HSCK1_B, 0, 0, + /* IP8_15_14 [2] */ + FN_VI0_DATA4_VI0_B4, FN_DU1_DB2, FN_RX1_A, 0, + /* IP8_13_11 [3] */ + FN_VI0_DATA3_VI0_B3, FN_DU1_DG5, FN_TX1_A, FN_TX0_C, + 0, 0, 0, 0, + /* IP8_10_9 [2] */ + FN_VI0_DATA2_VI0_B2, FN_DU1_DG4, FN_RX0_C, 0, + /* IP8_8_6 [3] */ + FN_VI0_DATA1_VI0_B1, FN_DU1_DG3, FN_IRQ3_B, FN_TX3_D, + 0, 0, 0, 0, + /* IP8_5_3 [3] */ + FN_VI0_DATA0_VI0_B0, FN_DU1_DG2, FN_IRQ2_B, FN_RX3_D, + 0, 0, 0, 0, + /* IP8_2_0 [3] */ + FN_VI0_VSYNC, FN_SD2_WP_B, FN_VI1_DATA3, FN_DU1_DR3, + 0, FN_HSPI_TX1_A, FN_TX3_B, 0, + } + }, + { PINMUX_CFG_REG_VAR("IPSR9", 0xfffc0044, 32, + 1, 1, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3) { + /* IP9_31 [1] */ + 0, 0, + /* IP9_30 [1] */ + 0, 0, + /* IP9_29_27 [3] */ + FN_VI1_DATA11_A, FN_DU1_EXHSYNC_DU1_HSYNC, + FN_ETH_RXD1, FN_FMIN_C, + 0, FN_RX2_D, + FN_SCL2_C, 0, + /* IP9_26_24 [3] */ + FN_VI1_DATA10_A, FN_DU1_DOTCLKOUT, + FN_ETH_RXD0, FN_BPFCLK_C, + 0, FN_TX2_D, + FN_SDA2_C, 0, + /* IP9_23_21 [3] */ + FN_VI0_R5_A, 0, FN_ETH_RX_ER, FN_FMCLK_C, + FN_IERX, FN_RX2_C, 0, 0, + /* IP9_20_18 [3] */ + FN_VI0_R4_A, FN_ETH_TX_EN, 0, 0, + FN_IETX, FN_TX2_C, 0, 0, + /* IP9_17_15 [3] */ + FN_VI0_R3_A, FN_ETH_CRS_DV, 0, FN_IECLK, + FN_SCK2_C, 0, 0, 0, + /* IP9_14_12 [3] */ + FN_VI0_R2_A, FN_VI1_DATA9, FN_DU1_DB7, FN_ETH_TXD1, + 0, FN_PWM3, 0, 0, + /* IP9_11_9 [3] */ + FN_VI0_R1_A, FN_VI1_DATA8, FN_DU1_DB6, FN_ETH_TXD0, + 0, FN_PWM2, FN_TCLK1, 0, + /* IP9_8_6 [3] */ + FN_VI0_R0_A, FN_VI1_CLK, FN_ETH_REF_CLK, FN_DU1_DOTCLKIN, + 0, 0, 0, 0, + /* IP9_5_3 [3] */ + FN_VI0_G5, FN_SD2_DAT1_B, FN_VI1_DATA7, FN_DU1_DR7, + 0, FN_HCTS1_B, 0, 0, + /* IP9_2_0 [3] */ + FN_VI0_G4, FN_SD2_DAT0_B, FN_VI1_DATA6, FN_DU1_DR6, + 0, FN_HRTS1_B, 0, 0, + } + }, + { PINMUX_CFG_REG_VAR("IPSR10", 0xfffc0048, 32, + 1, 1, 1, 1, 1, 1, 1, 3, 3, 3, 3, 4, 3, 3, 3) { + + /* IP10_31 [1] */ + 0, 0, + /* IP10_30 [1] */ + 0, 0, + /* IP10_29 [1] */ + 0, 0, + /* IP10_28 [1] */ + 0, 0, + /* IP10_27 [1] */ + 0, 0, + /* IP10_26 [1] */ + 0, 0, + /* IP10_25 [1] */ + 0, 0, + /* IP10_24_22 [3] */ + FN_SD2_WP_A, FN_VI1_DATA15, FN_EX_WAIT2_B, FN_DACK0_B, + FN_HSPI_TX2_B, FN_CAN_CLK_C, 0, 0, + /* IP10_21_19 [3] */ + FN_SD2_CD_A, FN_VI1_DATA14, FN_EX_WAIT1_B, FN_DREQ0_B, + FN_HSPI_RX2_B, FN_REMOCON_A, 0, 0, + /* IP10_18_16 [3] */ + FN_SD2_DAT3_A, FN_VI1_DATA13, FN_DACK2_B, FN_ATAG1, + FN_HSPI_CS2_B, FN_GPSIN_B, 0, 0, + /* IP10_15_13 [3] */ + FN_SD2_DAT2_A, FN_VI1_DATA12, FN_DREQ2_B, FN_ATADIR1, + FN_HSPI_CLK2_B, FN_GPSCLK_B, 0, 0, + /* IP10_12_9 [4] */ + FN_SD2_DAT1_A, FN_DU1_CDE, FN_ATACS11, FN_DACK1_B, + FN_ETH_MAGIC, FN_CAN1_TX_A, 0, FN_PWM6, + 0, 0, 0, 0, + 0, 0, 0, 0, + /* IP10_8_6 [3] */ + FN_SD2_DAT0_A, FN_DU1_DISP, FN_ATACS01, FN_DREQ1_B, + FN_ETH_LINK, FN_CAN1_RX_A, 0, 0, + /* IP10_5_3 [3] */ + FN_SD2_CMD_A, FN_DU1_EXODDF_DU1_ODDF_DISP_CDE, + FN_ATAWR1, FN_ETH_MDIO, + FN_SCL1_B, 0, + 0, 0, + /* IP10_2_0 [3] */ + FN_SD2_CLK_A, FN_DU1_EXVSYNC_DU1_VSYNC, + FN_ATARD1, FN_ETH_MDC, + FN_SDA1_B, 0, + 0, 0, + } + }, + { PINMUX_CFG_REG_VAR("MOD_SEL0", 0xfffc0050, 32, + 1, 1, 2, 2, 3, 2, 2, 1, 1, 1, 1, 2, + 1, 1, 1, 1, 2, 1, 1, 1, 1, 1, 1, 1) { + + /* SEL 31 [1] */ + 0, 0, + /* SEL_30 (SCIF5) [1] */ + FN_SEL_SCIF5_A, FN_SEL_SCIF5_B, + /* SEL_29_28 (SCIF4) [2] */ + FN_SEL_SCIF4_A, FN_SEL_SCIF4_B, + FN_SEL_SCIF4_C, 0, + /* SEL_27_26 (SCIF3) [2] */ + FN_SEL_SCIF3_A, FN_SEL_SCIF3_B, + FN_SEL_SCIF3_C, FN_SEL_SCIF3_D, + /* SEL_25_23 (SCIF2) [3] */ + FN_SEL_SCIF2_A, FN_SEL_SCIF2_B, + FN_SEL_SCIF2_C, FN_SEL_SCIF2_D, + FN_SEL_SCIF2_E, 0, + 0, 0, + /* SEL_22_21 (SCIF1) [2] */ + FN_SEL_SCIF1_A, FN_SEL_SCIF1_B, + FN_SEL_SCIF1_C, FN_SEL_SCIF1_D, + /* SEL_20_19 (SCIF0) [2] */ + FN_SEL_SCIF0_A, FN_SEL_SCIF0_B, + FN_SEL_SCIF0_C, FN_SEL_SCIF0_D, + /* SEL_18 [1] */ + 0, 0, + /* SEL_17 (SSI2) [1] */ + FN_SEL_SSI2_A, FN_SEL_SSI2_B, + /* SEL_16 (SSI1) [1] */ + FN_SEL_SSI1_A, FN_SEL_SSI1_B, + /* SEL_15 (VI1) [1] */ + FN_SEL_VI1_A, FN_SEL_VI1_B, + /* SEL_14_13 (VI0) [2] */ + FN_SEL_VI0_A, FN_SEL_VI0_B, + FN_SEL_VI0_C, FN_SEL_VI0_D, + /* SEL_12 [1] */ + 0, 0, + /* SEL_11 (SD2) [1] */ + FN_SEL_SD2_A, FN_SEL_SD2_B, + /* SEL_10 (SD1) [1] */ + FN_SEL_SD1_A, FN_SEL_SD1_B, + /* SEL_9 (IRQ3) [1] */ + FN_SEL_IRQ3_A, FN_SEL_IRQ3_B, + /* SEL_8_7 (IRQ2) [2] */ + FN_SEL_IRQ2_A, FN_SEL_IRQ2_B, + FN_SEL_IRQ2_C, 0, + /* SEL_6 (IRQ1) [1] */ + FN_SEL_IRQ1_A, FN_SEL_IRQ1_B, + /* SEL_5 [1] */ + 0, 0, + /* SEL_4 (DREQ2) [1] */ + FN_SEL_DREQ2_A, FN_SEL_DREQ2_B, + /* SEL_3 (DREQ1) [1] */ + FN_SEL_DREQ1_A, FN_SEL_DREQ1_B, + /* SEL_2 (DREQ0) [1] */ + FN_SEL_DREQ0_A, FN_SEL_DREQ0_B, + /* SEL_1 (WAIT2) [1] */ + FN_SEL_WAIT2_A, FN_SEL_WAIT2_B, + /* SEL_0 (WAIT1) [1] */ + FN_SEL_WAIT1_A, FN_SEL_WAIT1_B, + } + }, + { PINMUX_CFG_REG_VAR("MOD_SEL1", 0xfffc0054, 32, + 1, 1, 1, 1, 1, 1, 2, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 2, 2, 2, 1, 1, 1, 1, 2, 2, 1) { + + /* SEL_31 [1] */ + 0, 0, + /* SEL_30 [1] */ + 0, 0, + /* SEL_29 [1] */ + 0, 0, + /* SEL_28 [1] */ + 0, 0, + /* SEL_27 (CAN1) [1] */ + FN_SEL_CAN1_A, FN_SEL_CAN1_B, + /* SEL_26 (CAN0) [1] */ + FN_SEL_CAN0_A, FN_SEL_CAN0_B, + /* SEL_25_24 (CANCLK) [2] */ + FN_SEL_CANCLK_A, FN_SEL_CANCLK_B, + FN_SEL_CANCLK_C, FN_SEL_CANCLK_D, + /* SEL_23 (HSCIF1) [1] */ + FN_SEL_HSCIF1_A, FN_SEL_HSCIF1_B, + /* SEL_22 (HSCIF0) [1] */ + FN_SEL_HSCIF0_A, FN_SEL_HSCIF0_B, + /* SEL_21 [1] */ + 0, 0, + /* SEL_20 [1] */ + 0, 0, + /* SEL_19 [1] */ + 0, 0, + /* SEL_18 [1] */ + 0, 0, + /* SEL_17 [1] */ + 0, 0, + /* SEL_16 [1] */ + 0, 0, + /* SEL_15 [1] */ + 0, 0, + /* SEL_14_13 (REMOCON) [2] */ + FN_SEL_REMOCON_A, FN_SEL_REMOCON_B, + FN_SEL_REMOCON_C, 0, + /* SEL_12_11 (FM) [2] */ + FN_SEL_FM_A, FN_SEL_FM_B, + FN_SEL_FM_C, FN_SEL_FM_D, + /* SEL_10_9 (GPS) [2] */ + FN_SEL_GPS_A, FN_SEL_GPS_B, + FN_SEL_GPS_C, 0, + /* SEL_8 (TSIF0) [1] */ + FN_SEL_TSIF0_A, FN_SEL_TSIF0_B, + /* SEL_7 (HSPI2) [1] */ + FN_SEL_HSPI2_A, FN_SEL_HSPI2_B, + /* SEL_6 (HSPI1) [1] */ + FN_SEL_HSPI1_A, FN_SEL_HSPI1_B, + /* SEL_5 (HSPI0) [1] */ + FN_SEL_HSPI0_A, FN_SEL_HSPI0_B, + /* SEL_4_3 (I2C3) [2] */ + FN_SEL_I2C3_A, FN_SEL_I2C3_B, + FN_SEL_I2C3_C, 0, + /* SEL_2_1 (I2C2) [2] */ + FN_SEL_I2C2_A, FN_SEL_I2C2_B, + FN_SEL_I2C2_C, 0, + /* SEL_0 (I2C1) [1] */ + FN_SEL_I2C1_A, FN_SEL_I2C1_B, + } + }, + { }, +}; + +const struct sh_pfc_soc_info r8a7778_pinmux_info = { + .name = "r8a7778_pfc", + + .unlock_reg = 0xfffc0000, /* PMMR */ + + .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, + + .pins = pinmux_pins, + .nr_pins = ARRAY_SIZE(pinmux_pins), + + .groups = pinmux_groups, + .nr_groups = ARRAY_SIZE(pinmux_groups), + + .functions = pinmux_functions, + .nr_functions = ARRAY_SIZE(pinmux_functions), + + .cfg_regs = pinmux_config_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), +}; diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c index 8cd90e7e945..8e22ca6c104 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c @@ -1,8 +1,9 @@ /* * r8a7779 processor support - PFC hardware block * - * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011, 2013 Renesas Solutions Corp. * Copyright (C) 2011 Magnus Damm + * Copyright (C) 2013 Cogent Embedded, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,6 +20,7 @@ */ #include <linux/kernel.h> +#include <linux/platform_data/gpio-rcar.h> #include "sh_pfc.h" @@ -79,7 +81,7 @@ #define _GP_PORT_ALL(bank, pin, name, sfx) name##_##sfx #define _GP_GPIO(bank, pin, _name, sfx) \ - [(bank * 32) + pin] = { \ + [RCAR_GP_PIN(bank, pin)] = { \ .name = __stringify(_name), \ .enum_id = _name##_DATA, \ } @@ -1472,9 +1474,12 @@ static struct sh_pfc_pin pinmux_pins[] = { /* - DU0 -------------------------------------------------------------------- */ static const unsigned int du0_rgb666_pins[] = { /* R[7:2], G[7:2], B[7:2] */ - 188, 187, 186, 185, 184, 183, - 194, 193, 192, 191, 190, 189, - 200, 199, 198, 197, 196, 195, + RCAR_GP_PIN(5, 28), RCAR_GP_PIN(5, 27), RCAR_GP_PIN(5, 26), + RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 23), + RCAR_GP_PIN(6, 2), RCAR_GP_PIN(6, 1), RCAR_GP_PIN(6, 0), + RCAR_GP_PIN(5, 31), RCAR_GP_PIN(5, 30), RCAR_GP_PIN(5, 29), + RCAR_GP_PIN(6, 8), RCAR_GP_PIN(6, 7), RCAR_GP_PIN(6, 6), + RCAR_GP_PIN(6, 5), RCAR_GP_PIN(6, 4), RCAR_GP_PIN(6, 3), }; static const unsigned int du0_rgb666_mux[] = { DU0_DR7_MARK, DU0_DR6_MARK, DU0_DR5_MARK, DU0_DR4_MARK, @@ -1486,9 +1491,14 @@ static const unsigned int du0_rgb666_mux[] = { }; static const unsigned int du0_rgb888_pins[] = { /* R[7:0], G[7:0], B[7:0] */ - 188, 187, 186, 185, 184, 183, 24, 23, - 194, 193, 192, 191, 190, 189, 26, 25, - 200, 199, 198, 197, 196, 195, 28, 27, + RCAR_GP_PIN(5, 28), RCAR_GP_PIN(5, 27), RCAR_GP_PIN(5, 26), + RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 23), + RCAR_GP_PIN(0, 24), RCAR_GP_PIN(0, 23), RCAR_GP_PIN(6, 2), + RCAR_GP_PIN(6, 1), RCAR_GP_PIN(6, 0), RCAR_GP_PIN(5, 31), + RCAR_GP_PIN(5, 30), RCAR_GP_PIN(5, 29), RCAR_GP_PIN(0, 26), + RCAR_GP_PIN(0, 25), RCAR_GP_PIN(6, 8), RCAR_GP_PIN(6, 7), + RCAR_GP_PIN(6, 6), RCAR_GP_PIN(6, 5), RCAR_GP_PIN(6, 4), + RCAR_GP_PIN(6, 3), RCAR_GP_PIN(0, 28), RCAR_GP_PIN(0, 27), }; static const unsigned int du0_rgb888_mux[] = { DU0_DR7_MARK, DU0_DR6_MARK, DU0_DR5_MARK, DU0_DR4_MARK, @@ -1500,28 +1510,28 @@ static const unsigned int du0_rgb888_mux[] = { }; static const unsigned int du0_clk_in_pins[] = { /* CLKIN */ - 29, + RCAR_GP_PIN(0, 29), }; static const unsigned int du0_clk_in_mux[] = { DU0_DOTCLKIN_MARK, }; static const unsigned int du0_clk_out_0_pins[] = { /* CLKOUT */ - 180, + RCAR_GP_PIN(5, 20), }; static const unsigned int du0_clk_out_0_mux[] = { DU0_DOTCLKOUT0_MARK, }; static const unsigned int du0_clk_out_1_pins[] = { /* CLKOUT */ - 30, + RCAR_GP_PIN(0, 30), }; static const unsigned int du0_clk_out_1_mux[] = { DU0_DOTCLKOUT1_MARK, }; static const unsigned int du0_sync_0_pins[] = { /* VSYNC, HSYNC, DISP */ - 182, 181, 31, + RCAR_GP_PIN(5, 22), RCAR_GP_PIN(5, 21), RCAR_GP_PIN(0, 31), }; static const unsigned int du0_sync_0_mux[] = { DU0_EXHSYNC_DU0_HSYNC_MARK, DU0_EXVSYNC_DU0_VSYNC_MARK, @@ -1529,7 +1539,7 @@ static const unsigned int du0_sync_0_mux[] = { }; static const unsigned int du0_sync_1_pins[] = { /* VSYNC, HSYNC, DISP */ - 182, 181, 32, + RCAR_GP_PIN(5, 22), RCAR_GP_PIN(5, 21), RCAR_GP_PIN(1, 0), }; static const unsigned int du0_sync_1_mux[] = { DU0_EXHSYNC_DU0_HSYNC_MARK, DU0_EXVSYNC_DU0_VSYNC_MARK, @@ -1537,14 +1547,14 @@ static const unsigned int du0_sync_1_mux[] = { }; static const unsigned int du0_oddf_pins[] = { /* ODDF */ - 31, + RCAR_GP_PIN(0, 31), }; static const unsigned int du0_oddf_mux[] = { DU0_EXODDF_DU0_ODDF_DISP_CDE_MARK }; static const unsigned int du0_cde_pins[] = { /* CDE */ - 33, + RCAR_GP_PIN(1, 1), }; static const unsigned int du0_cde_mux[] = { DU0_CDE_MARK @@ -1552,9 +1562,12 @@ static const unsigned int du0_cde_mux[] = { /* - DU1 -------------------------------------------------------------------- */ static const unsigned int du1_rgb666_pins[] = { /* R[7:2], G[7:2], B[7:2] */ - 41, 40, 39, 38, 37, 36, - 49, 48, 47, 46, 45, 44, - 57, 56, 55, 54, 53, 52, + RCAR_GP_PIN(1, 9), RCAR_GP_PIN(1, 8), RCAR_GP_PIN(1, 7), + RCAR_GP_PIN(1, 6), RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 4), + RCAR_GP_PIN(1, 17), RCAR_GP_PIN(1, 16), RCAR_GP_PIN(1, 15), + RCAR_GP_PIN(1, 14), RCAR_GP_PIN(1, 13), RCAR_GP_PIN(1, 12), + RCAR_GP_PIN(1, 25), RCAR_GP_PIN(1, 24), RCAR_GP_PIN(1, 23), + RCAR_GP_PIN(1, 22), RCAR_GP_PIN(1, 21), RCAR_GP_PIN(1, 20), }; static const unsigned int du1_rgb666_mux[] = { DU1_DR7_MARK, DU1_DR6_MARK, DU1_DR5_MARK, DU1_DR4_MARK, @@ -1566,9 +1579,14 @@ static const unsigned int du1_rgb666_mux[] = { }; static const unsigned int du1_rgb888_pins[] = { /* R[7:0], G[7:0], B[7:0] */ - 41, 40, 39, 38, 37, 36, 35, 34, - 49, 48, 47, 46, 45, 44, 43, 32, - 57, 56, 55, 54, 53, 52, 51, 50, + RCAR_GP_PIN(1, 9), RCAR_GP_PIN(1, 8), RCAR_GP_PIN(1, 7), + RCAR_GP_PIN(1, 6), RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 4), + RCAR_GP_PIN(1, 3), RCAR_GP_PIN(1, 2), RCAR_GP_PIN(1, 17), + RCAR_GP_PIN(1, 16), RCAR_GP_PIN(1, 15), RCAR_GP_PIN(1, 14), + RCAR_GP_PIN(1, 13), RCAR_GP_PIN(1, 12), RCAR_GP_PIN(1, 11), + RCAR_GP_PIN(1, 0), RCAR_GP_PIN(1, 25), RCAR_GP_PIN(1, 24), + RCAR_GP_PIN(1, 23), RCAR_GP_PIN(1, 22), RCAR_GP_PIN(1, 21), + RCAR_GP_PIN(1, 20), RCAR_GP_PIN(1, 19), RCAR_GP_PIN(1, 18), }; static const unsigned int du1_rgb888_mux[] = { DU1_DR7_MARK, DU1_DR6_MARK, DU1_DR5_MARK, DU1_DR4_MARK, @@ -1580,21 +1598,21 @@ static const unsigned int du1_rgb888_mux[] = { }; static const unsigned int du1_clk_in_pins[] = { /* CLKIN */ - 58, + RCAR_GP_PIN(1, 26), }; static const unsigned int du1_clk_in_mux[] = { DU1_DOTCLKIN_MARK, }; static const unsigned int du1_clk_out_pins[] = { /* CLKOUT */ - 59, + RCAR_GP_PIN(1, 27), }; static const unsigned int du1_clk_out_mux[] = { DU1_DOTCLKOUT_MARK, }; static const unsigned int du1_sync_0_pins[] = { /* VSYNC, HSYNC, DISP */ - 61, 60, 62, + RCAR_GP_PIN(1, 29), RCAR_GP_PIN(1, 28), RCAR_GP_PIN(1, 30), }; static const unsigned int du1_sync_0_mux[] = { DU1_EXVSYNC_DU1_VSYNC_MARK, DU1_EXHSYNC_DU1_HSYNC_MARK, @@ -1602,7 +1620,7 @@ static const unsigned int du1_sync_0_mux[] = { }; static const unsigned int du1_sync_1_pins[] = { /* VSYNC, HSYNC, DISP */ - 61, 60, 63, + RCAR_GP_PIN(1, 29), RCAR_GP_PIN(1, 28), RCAR_GP_PIN(1, 31), }; static const unsigned int du1_sync_1_mux[] = { DU1_EXVSYNC_DU1_VSYNC_MARK, DU1_EXHSYNC_DU1_HSYNC_MARK, @@ -1610,22 +1628,55 @@ static const unsigned int du1_sync_1_mux[] = { }; static const unsigned int du1_oddf_pins[] = { /* ODDF */ - 62, + RCAR_GP_PIN(1, 30), }; static const unsigned int du1_oddf_mux[] = { DU1_EXODDF_DU1_ODDF_DISP_CDE_MARK }; static const unsigned int du1_cde_pins[] = { /* CDE */ - 64, + RCAR_GP_PIN(2, 0), }; static const unsigned int du1_cde_mux[] = { DU1_CDE_MARK }; +/* - Ether ------------------------------------------------------------------ */ +static const unsigned int ether_rmii_pins[] = { + /* + * ETH_TXD0, ETH_TXD1, ETH_TX_EN, ETH_REFCLK, + * ETH_RXD0, ETH_RXD1, ETH_CRS_DV, ETH_RX_ER, + * ETH_MDIO, ETH_MDC + */ + RCAR_GP_PIN(2, 27), RCAR_GP_PIN(2, 16), RCAR_GP_PIN(2, 18), + RCAR_GP_PIN(2, 26), + RCAR_GP_PIN(2, 20), RCAR_GP_PIN(2, 21), RCAR_GP_PIN(2, 17), + RCAR_GP_PIN(2, 19), + RCAR_GP_PIN(2, 29), RCAR_GP_PIN(2, 28), +}; +static const unsigned int ether_rmii_mux[] = { + ETH_TXD0_MARK, ETH_TXD1_MARK, ETH_TX_EN_MARK, ETH_REFCLK_MARK, + ETH_RXD0_MARK, ETH_RXD1_MARK, ETH_CRS_DV_MARK, ETH_RX_ER_MARK, + ETH_MDIO_MARK, ETH_MDC_MARK, +}; +static const unsigned int ether_link_pins[] = { + /* ETH_LINK */ + RCAR_GP_PIN(2, 24), +}; +static const unsigned int ether_link_mux[] = { + ETH_LINK_MARK, +}; +static const unsigned int ether_magic_pins[] = { + /* ETH_MAGIC */ + RCAR_GP_PIN(2, 25), +}; +static const unsigned int ether_magic_mux[] = { + ETH_MAGIC_MARK, +}; /* - HSPI0 ------------------------------------------------------------------ */ static const unsigned int hspi0_pins[] = { /* CLK, CS, RX, TX */ - 150, 151, 153, 152, + RCAR_GP_PIN(4, 22), RCAR_GP_PIN(4, 23), RCAR_GP_PIN(4, 25), + RCAR_GP_PIN(4, 24), }; static const unsigned int hspi0_mux[] = { HSPI_CLK0_MARK, HSPI_CS0_MARK, HSPI_RX0_MARK, HSPI_TX0_MARK, @@ -1633,28 +1684,32 @@ static const unsigned int hspi0_mux[] = { /* - HSPI1 ------------------------------------------------------------------ */ static const unsigned int hspi1_pins[] = { /* CLK, CS, RX, TX */ - 63, 58, 64, 62, + RCAR_GP_PIN(1, 31), RCAR_GP_PIN(1, 26), RCAR_GP_PIN(2, 0), + RCAR_GP_PIN(1, 30), }; static const unsigned int hspi1_mux[] = { HSPI_CLK1_MARK, HSPI_CS1_MARK, HSPI_RX1_MARK, HSPI_TX1_MARK, }; static const unsigned int hspi1_b_pins[] = { /* CLK, CS, RX, TX */ - 90, 91, 93, 92, + RCAR_GP_PIN(2, 26), RCAR_GP_PIN(2, 27), RCAR_GP_PIN(2, 29), + RCAR_GP_PIN(2, 28), }; static const unsigned int hspi1_b_mux[] = { HSPI_CLK1_B_MARK, HSPI_CS1_B_MARK, HSPI_RX1_B_MARK, HSPI_TX1_B_MARK, }; static const unsigned int hspi1_c_pins[] = { /* CLK, CS, RX, TX */ - 141, 142, 144, 143, + RCAR_GP_PIN(4, 13), RCAR_GP_PIN(4, 14), RCAR_GP_PIN(4, 16), + RCAR_GP_PIN(4, 15), }; static const unsigned int hspi1_c_mux[] = { HSPI_CLK1_C_MARK, HSPI_CS1_C_MARK, HSPI_RX1_C_MARK, HSPI_TX1_C_MARK, }; static const unsigned int hspi1_d_pins[] = { /* CLK, CS, RX, TX */ - 101, 102, 104, 103, + RCAR_GP_PIN(3, 5), RCAR_GP_PIN(3, 6), RCAR_GP_PIN(3, 8), + RCAR_GP_PIN(3, 7), }; static const unsigned int hspi1_d_mux[] = { HSPI_CLK1_D_MARK, HSPI_CS1_D_MARK, HSPI_RX1_D_MARK, HSPI_TX1_D_MARK, @@ -1662,14 +1717,16 @@ static const unsigned int hspi1_d_mux[] = { /* - HSPI2 ------------------------------------------------------------------ */ static const unsigned int hspi2_pins[] = { /* CLK, CS, RX, TX */ - 9, 10, 11, 14, + RCAR_GP_PIN(0, 9), RCAR_GP_PIN(0, 10), RCAR_GP_PIN(0, 11), + RCAR_GP_PIN(0, 14), }; static const unsigned int hspi2_mux[] = { HSPI_CLK2_MARK, HSPI_CS2_MARK, HSPI_RX2_MARK, HSPI_TX2_MARK, }; static const unsigned int hspi2_b_pins[] = { /* CLK, CS, RX, TX */ - 7, 13, 8, 6, + RCAR_GP_PIN(0, 7), RCAR_GP_PIN(0, 13), RCAR_GP_PIN(0, 8), + RCAR_GP_PIN(0, 6), }; static const unsigned int hspi2_b_mux[] = { HSPI_CLK2_B_MARK, HSPI_CS2_B_MARK, HSPI_RX2_B_MARK, HSPI_TX2_B_MARK, @@ -1677,56 +1734,56 @@ static const unsigned int hspi2_b_mux[] = { /* - INTC ------------------------------------------------------------------- */ static const unsigned int intc_irq0_pins[] = { /* IRQ */ - 78, + RCAR_GP_PIN(2, 14), }; static const unsigned int intc_irq0_mux[] = { IRQ0_MARK, }; static const unsigned int intc_irq0_b_pins[] = { /* IRQ */ - 141, + RCAR_GP_PIN(4, 13), }; static const unsigned int intc_irq0_b_mux[] = { IRQ0_B_MARK, }; static const unsigned int intc_irq1_pins[] = { /* IRQ */ - 79, + RCAR_GP_PIN(2, 15), }; static const unsigned int intc_irq1_mux[] = { IRQ1_MARK, }; static const unsigned int intc_irq1_b_pins[] = { /* IRQ */ - 142, + RCAR_GP_PIN(4, 14), }; static const unsigned int intc_irq1_b_mux[] = { IRQ1_B_MARK, }; static const unsigned int intc_irq2_pins[] = { /* IRQ */ - 88, + RCAR_GP_PIN(2, 24), }; static const unsigned int intc_irq2_mux[] = { IRQ2_MARK, }; static const unsigned int intc_irq2_b_pins[] = { /* IRQ */ - 143, + RCAR_GP_PIN(4, 15), }; static const unsigned int intc_irq2_b_mux[] = { IRQ2_B_MARK, }; static const unsigned int intc_irq3_pins[] = { /* IRQ */ - 89, + RCAR_GP_PIN(2, 25), }; static const unsigned int intc_irq3_mux[] = { IRQ3_MARK, }; static const unsigned int intc_irq3_b_pins[] = { /* IRQ */ - 144, + RCAR_GP_PIN(4, 16), }; static const unsigned int intc_irq3_b_mux[] = { IRQ3_B_MARK, @@ -1734,56 +1791,56 @@ static const unsigned int intc_irq3_b_mux[] = { /* - LSBC ------------------------------------------------------------------- */ static const unsigned int lbsc_cs0_pins[] = { /* CS */ - 13, + RCAR_GP_PIN(0, 13), }; static const unsigned int lbsc_cs0_mux[] = { CS0_MARK, }; static const unsigned int lbsc_cs1_pins[] = { /* CS */ - 14, + RCAR_GP_PIN(0, 14), }; static const unsigned int lbsc_cs1_mux[] = { CS1_A26_MARK, }; static const unsigned int lbsc_ex_cs0_pins[] = { /* CS */ - 15, + RCAR_GP_PIN(0, 15), }; static const unsigned int lbsc_ex_cs0_mux[] = { EX_CS0_MARK, }; static const unsigned int lbsc_ex_cs1_pins[] = { /* CS */ - 16, + RCAR_GP_PIN(0, 16), }; static const unsigned int lbsc_ex_cs1_mux[] = { EX_CS1_MARK, }; static const unsigned int lbsc_ex_cs2_pins[] = { /* CS */ - 17, + RCAR_GP_PIN(0, 17), }; static const unsigned int lbsc_ex_cs2_mux[] = { EX_CS2_MARK, }; static const unsigned int lbsc_ex_cs3_pins[] = { /* CS */ - 18, + RCAR_GP_PIN(0, 18), }; static const unsigned int lbsc_ex_cs3_mux[] = { EX_CS3_MARK, }; static const unsigned int lbsc_ex_cs4_pins[] = { /* CS */ - 19, + RCAR_GP_PIN(0, 19), }; static const unsigned int lbsc_ex_cs4_mux[] = { EX_CS4_MARK, }; static const unsigned int lbsc_ex_cs5_pins[] = { /* CS */ - 20, + RCAR_GP_PIN(0, 20), }; static const unsigned int lbsc_ex_cs5_mux[] = { EX_CS5_MARK, @@ -1791,21 +1848,24 @@ static const unsigned int lbsc_ex_cs5_mux[] = { /* - MMCIF ------------------------------------------------------------------ */ static const unsigned int mmc0_data1_pins[] = { /* D[0] */ - 19, + RCAR_GP_PIN(0, 19), }; static const unsigned int mmc0_data1_mux[] = { MMC0_D0_MARK, }; static const unsigned int mmc0_data4_pins[] = { /* D[0:3] */ - 19, 20, 21, 2, + RCAR_GP_PIN(0, 19), RCAR_GP_PIN(0, 20), RCAR_GP_PIN(0, 21), + RCAR_GP_PIN(0, 2), }; static const unsigned int mmc0_data4_mux[] = { MMC0_D0_MARK, MMC0_D1_MARK, MMC0_D2_MARK, MMC0_D3_MARK, }; static const unsigned int mmc0_data8_pins[] = { /* D[0:7] */ - 19, 20, 21, 2, 10, 11, 15, 16, + RCAR_GP_PIN(0, 19), RCAR_GP_PIN(0, 20), RCAR_GP_PIN(0, 21), + RCAR_GP_PIN(0, 2), RCAR_GP_PIN(0, 10), RCAR_GP_PIN(0, 11), + RCAR_GP_PIN(0, 15), RCAR_GP_PIN(0, 16), }; static const unsigned int mmc0_data8_mux[] = { MMC0_D0_MARK, MMC0_D1_MARK, MMC0_D2_MARK, MMC0_D3_MARK, @@ -1813,28 +1873,31 @@ static const unsigned int mmc0_data8_mux[] = { }; static const unsigned int mmc0_ctrl_pins[] = { /* CMD, CLK */ - 18, 17, + RCAR_GP_PIN(0, 18), RCAR_GP_PIN(0, 17), }; static const unsigned int mmc0_ctrl_mux[] = { MMC0_CMD_MARK, MMC0_CLK_MARK, }; static const unsigned int mmc1_data1_pins[] = { /* D[0] */ - 72, + RCAR_GP_PIN(2, 8), }; static const unsigned int mmc1_data1_mux[] = { MMC1_D0_MARK, }; static const unsigned int mmc1_data4_pins[] = { /* D[0:3] */ - 72, 73, 74, 75, + RCAR_GP_PIN(2, 8), RCAR_GP_PIN(2, 9), RCAR_GP_PIN(2, 10), + RCAR_GP_PIN(2, 11), }; static const unsigned int mmc1_data4_mux[] = { MMC1_D0_MARK, MMC1_D1_MARK, MMC1_D2_MARK, MMC1_D3_MARK, }; static const unsigned int mmc1_data8_pins[] = { /* D[0:7] */ - 72, 73, 74, 75, 76, 77, 80, 81, + RCAR_GP_PIN(2, 8), RCAR_GP_PIN(2, 9), RCAR_GP_PIN(2, 10), + RCAR_GP_PIN(2, 11), RCAR_GP_PIN(2, 12), RCAR_GP_PIN(2, 13), + RCAR_GP_PIN(2, 16), RCAR_GP_PIN(2, 17), }; static const unsigned int mmc1_data8_mux[] = { MMC1_D0_MARK, MMC1_D1_MARK, MMC1_D2_MARK, MMC1_D3_MARK, @@ -1842,7 +1905,7 @@ static const unsigned int mmc1_data8_mux[] = { }; static const unsigned int mmc1_ctrl_pins[] = { /* CMD, CLK */ - 68, 65, + RCAR_GP_PIN(2, 4), RCAR_GP_PIN(2, 1), }; static const unsigned int mmc1_ctrl_mux[] = { MMC1_CMD_MARK, MMC1_CLK_MARK, @@ -1850,84 +1913,84 @@ static const unsigned int mmc1_ctrl_mux[] = { /* - SCIF0 ------------------------------------------------------------------ */ static const unsigned int scif0_data_pins[] = { /* RXD, TXD */ - 153, 152, + RCAR_GP_PIN(4, 25), RCAR_GP_PIN(4, 24), }; static const unsigned int scif0_data_mux[] = { RX0_MARK, TX0_MARK, }; static const unsigned int scif0_clk_pins[] = { /* SCK */ - 156, + RCAR_GP_PIN(4, 28), }; static const unsigned int scif0_clk_mux[] = { SCK0_MARK, }; static const unsigned int scif0_ctrl_pins[] = { /* RTS, CTS */ - 151, 150, + RCAR_GP_PIN(4, 23), RCAR_GP_PIN(4, 22), }; static const unsigned int scif0_ctrl_mux[] = { RTS0_TANS_MARK, CTS0_MARK, }; static const unsigned int scif0_data_b_pins[] = { /* RXD, TXD */ - 20, 19, + RCAR_GP_PIN(0, 20), RCAR_GP_PIN(0, 19), }; static const unsigned int scif0_data_b_mux[] = { RX0_B_MARK, TX0_B_MARK, }; static const unsigned int scif0_clk_b_pins[] = { /* SCK */ - 33, + RCAR_GP_PIN(1, 1), }; static const unsigned int scif0_clk_b_mux[] = { SCK0_B_MARK, }; static const unsigned int scif0_ctrl_b_pins[] = { /* RTS, CTS */ - 18, 11, + RCAR_GP_PIN(0, 18), RCAR_GP_PIN(0, 11), }; static const unsigned int scif0_ctrl_b_mux[] = { RTS0_B_TANS_B_MARK, CTS0_B_MARK, }; static const unsigned int scif0_data_c_pins[] = { /* RXD, TXD */ - 146, 147, + RCAR_GP_PIN(4, 18), RCAR_GP_PIN(4, 19), }; static const unsigned int scif0_data_c_mux[] = { RX0_C_MARK, TX0_C_MARK, }; static const unsigned int scif0_clk_c_pins[] = { /* SCK */ - 145, + RCAR_GP_PIN(4, 17), }; static const unsigned int scif0_clk_c_mux[] = { SCK0_C_MARK, }; static const unsigned int scif0_ctrl_c_pins[] = { /* RTS, CTS */ - 149, 148, + RCAR_GP_PIN(4, 21), RCAR_GP_PIN(4, 20), }; static const unsigned int scif0_ctrl_c_mux[] = { RTS0_C_TANS_C_MARK, CTS0_C_MARK, }; static const unsigned int scif0_data_d_pins[] = { /* RXD, TXD */ - 43, 42, + RCAR_GP_PIN(1, 11), RCAR_GP_PIN(1, 10), }; static const unsigned int scif0_data_d_mux[] = { RX0_D_MARK, TX0_D_MARK, }; static const unsigned int scif0_clk_d_pins[] = { /* SCK */ - 50, + RCAR_GP_PIN(1, 18), }; static const unsigned int scif0_clk_d_mux[] = { SCK0_D_MARK, }; static const unsigned int scif0_ctrl_d_pins[] = { /* RTS, CTS */ - 51, 35, + RCAR_GP_PIN(1, 19), RCAR_GP_PIN(1, 3), }; static const unsigned int scif0_ctrl_d_mux[] = { RTS0_D_TANS_D_MARK, CTS0_D_MARK, @@ -1935,63 +1998,63 @@ static const unsigned int scif0_ctrl_d_mux[] = { /* - SCIF1 ------------------------------------------------------------------ */ static const unsigned int scif1_data_pins[] = { /* RXD, TXD */ - 149, 148, + RCAR_GP_PIN(4, 21), RCAR_GP_PIN(4, 20), }; static const unsigned int scif1_data_mux[] = { RX1_MARK, TX1_MARK, }; static const unsigned int scif1_clk_pins[] = { /* SCK */ - 145, + RCAR_GP_PIN(4, 17), }; static const unsigned int scif1_clk_mux[] = { SCK1_MARK, }; static const unsigned int scif1_ctrl_pins[] = { /* RTS, CTS */ - 147, 146, + RCAR_GP_PIN(4, 19), RCAR_GP_PIN(4, 18), }; static const unsigned int scif1_ctrl_mux[] = { RTS1_TANS_MARK, CTS1_MARK, }; static const unsigned int scif1_data_b_pins[] = { /* RXD, TXD */ - 117, 114, + RCAR_GP_PIN(3, 21), RCAR_GP_PIN(3, 18), }; static const unsigned int scif1_data_b_mux[] = { RX1_B_MARK, TX1_B_MARK, }; static const unsigned int scif1_clk_b_pins[] = { /* SCK */ - 113, + RCAR_GP_PIN(3, 17), }; static const unsigned int scif1_clk_b_mux[] = { SCK1_B_MARK, }; static const unsigned int scif1_ctrl_b_pins[] = { /* RTS, CTS */ - 115, 116, + RCAR_GP_PIN(3, 19), RCAR_GP_PIN(3, 20), }; static const unsigned int scif1_ctrl_b_mux[] = { RTS1_B_TANS_B_MARK, CTS1_B_MARK, }; static const unsigned int scif1_data_c_pins[] = { /* RXD, TXD */ - 67, 66, + RCAR_GP_PIN(2, 3), RCAR_GP_PIN(2, 2), }; static const unsigned int scif1_data_c_mux[] = { RX1_C_MARK, TX1_C_MARK, }; static const unsigned int scif1_clk_c_pins[] = { /* SCK */ - 86, + RCAR_GP_PIN(2, 22), }; static const unsigned int scif1_clk_c_mux[] = { SCK1_C_MARK, }; static const unsigned int scif1_ctrl_c_pins[] = { /* RTS, CTS */ - 69, 68, + RCAR_GP_PIN(2, 5), RCAR_GP_PIN(2, 4), }; static const unsigned int scif1_ctrl_c_mux[] = { RTS1_C_TANS_C_MARK, CTS1_C_MARK, @@ -1999,63 +2062,63 @@ static const unsigned int scif1_ctrl_c_mux[] = { /* - SCIF2 ------------------------------------------------------------------ */ static const unsigned int scif2_data_pins[] = { /* RXD, TXD */ - 106, 105, + RCAR_GP_PIN(3, 10), RCAR_GP_PIN(3, 9), }; static const unsigned int scif2_data_mux[] = { RX2_MARK, TX2_MARK, }; static const unsigned int scif2_clk_pins[] = { /* SCK */ - 107, + RCAR_GP_PIN(3, 11), }; static const unsigned int scif2_clk_mux[] = { SCK2_MARK, }; static const unsigned int scif2_data_b_pins[] = { /* RXD, TXD */ - 120, 119, + RCAR_GP_PIN(3, 24), RCAR_GP_PIN(3, 23), }; static const unsigned int scif2_data_b_mux[] = { RX2_B_MARK, TX2_B_MARK, }; static const unsigned int scif2_clk_b_pins[] = { /* SCK */ - 118, + RCAR_GP_PIN(3, 22), }; static const unsigned int scif2_clk_b_mux[] = { SCK2_B_MARK, }; static const unsigned int scif2_data_c_pins[] = { /* RXD, TXD */ - 33, 31, + RCAR_GP_PIN(1, 1), RCAR_GP_PIN(0, 31), }; static const unsigned int scif2_data_c_mux[] = { RX2_C_MARK, TX2_C_MARK, }; static const unsigned int scif2_clk_c_pins[] = { /* SCK */ - 32, + RCAR_GP_PIN(1, 0), }; static const unsigned int scif2_clk_c_mux[] = { SCK2_C_MARK, }; static const unsigned int scif2_data_d_pins[] = { /* RXD, TXD */ - 64, 62, + RCAR_GP_PIN(2, 0), RCAR_GP_PIN(1, 30), }; static const unsigned int scif2_data_d_mux[] = { RX2_D_MARK, TX2_D_MARK, }; static const unsigned int scif2_clk_d_pins[] = { /* SCK */ - 63, + RCAR_GP_PIN(1, 31), }; static const unsigned int scif2_clk_d_mux[] = { SCK2_D_MARK, }; static const unsigned int scif2_data_e_pins[] = { /* RXD, TXD */ - 20, 19, + RCAR_GP_PIN(0, 20), RCAR_GP_PIN(0, 19), }; static const unsigned int scif2_data_e_mux[] = { RX2_E_MARK, TX2_E_MARK, @@ -2063,14 +2126,14 @@ static const unsigned int scif2_data_e_mux[] = { /* - SCIF3 ------------------------------------------------------------------ */ static const unsigned int scif3_data_pins[] = { /* RXD, TXD */ - 137, 136, + RCAR_GP_PIN(4, 9), RCAR_GP_PIN(4, 8), }; static const unsigned int scif3_data_mux[] = { RX3_IRDA_RX_MARK, TX3_IRDA_TX_MARK, }; static const unsigned int scif3_clk_pins[] = { /* SCK */ - 135, + RCAR_GP_PIN(4, 7), }; static const unsigned int scif3_clk_mux[] = { SCK3_MARK, @@ -2078,35 +2141,35 @@ static const unsigned int scif3_clk_mux[] = { static const unsigned int scif3_data_b_pins[] = { /* RXD, TXD */ - 64, 62, + RCAR_GP_PIN(2, 0), RCAR_GP_PIN(1, 30), }; static const unsigned int scif3_data_b_mux[] = { RX3_B_IRDA_RX_B_MARK, TX3_B_IRDA_TX_B_MARK, }; static const unsigned int scif3_data_c_pins[] = { /* RXD, TXD */ - 15, 12, + RCAR_GP_PIN(0, 15), RCAR_GP_PIN(0, 12), }; static const unsigned int scif3_data_c_mux[] = { RX3_C_IRDA_RX_C_MARK, TX3C_IRDA_TX_C_MARK, }; static const unsigned int scif3_data_d_pins[] = { /* RXD, TXD */ - 30, 29, + RCAR_GP_PIN(0, 30), RCAR_GP_PIN(0, 29), }; static const unsigned int scif3_data_d_mux[] = { RX3_D_IRDA_RX_D_MARK, TX3_D_IRDA_TX_D_MARK, }; static const unsigned int scif3_data_e_pins[] = { /* RXD, TXD */ - 35, 34, + RCAR_GP_PIN(1, 3), RCAR_GP_PIN(1, 2), }; static const unsigned int scif3_data_e_mux[] = { RX3_E_IRDA_RX_E_MARK, TX3_E_IRDA_TX_E_MARK, }; static const unsigned int scif3_clk_e_pins[] = { /* SCK */ - 42, + RCAR_GP_PIN(1, 10), }; static const unsigned int scif3_clk_e_mux[] = { SCK3_E_MARK, @@ -2114,42 +2177,42 @@ static const unsigned int scif3_clk_e_mux[] = { /* - SCIF4 ------------------------------------------------------------------ */ static const unsigned int scif4_data_pins[] = { /* RXD, TXD */ - 123, 122, + RCAR_GP_PIN(3, 27), RCAR_GP_PIN(3, 26), }; static const unsigned int scif4_data_mux[] = { RX4_MARK, TX4_MARK, }; static const unsigned int scif4_clk_pins[] = { /* SCK */ - 121, + RCAR_GP_PIN(3, 25), }; static const unsigned int scif4_clk_mux[] = { SCK4_MARK, }; static const unsigned int scif4_data_b_pins[] = { /* RXD, TXD */ - 111, 110, + RCAR_GP_PIN(3, 15), RCAR_GP_PIN(3, 14), }; static const unsigned int scif4_data_b_mux[] = { RX4_B_MARK, TX4_B_MARK, }; static const unsigned int scif4_clk_b_pins[] = { /* SCK */ - 112, + RCAR_GP_PIN(3, 16), }; static const unsigned int scif4_clk_b_mux[] = { SCK4_B_MARK, }; static const unsigned int scif4_data_c_pins[] = { /* RXD, TXD */ - 22, 21, + RCAR_GP_PIN(0, 22), RCAR_GP_PIN(0, 21), }; static const unsigned int scif4_data_c_mux[] = { RX4_C_MARK, TX4_C_MARK, }; static const unsigned int scif4_data_d_pins[] = { /* RXD, TXD */ - 69, 68, + RCAR_GP_PIN(2, 5), RCAR_GP_PIN(2, 4), }; static const unsigned int scif4_data_d_mux[] = { RX4_D_MARK, TX4_D_MARK, @@ -2157,56 +2220,56 @@ static const unsigned int scif4_data_d_mux[] = { /* - SCIF5 ------------------------------------------------------------------ */ static const unsigned int scif5_data_pins[] = { /* RXD, TXD */ - 51, 50, + RCAR_GP_PIN(1, 19), RCAR_GP_PIN(1, 18), }; static const unsigned int scif5_data_mux[] = { RX5_MARK, TX5_MARK, }; static const unsigned int scif5_clk_pins[] = { /* SCK */ - 43, + RCAR_GP_PIN(1, 11), }; static const unsigned int scif5_clk_mux[] = { SCK5_MARK, }; static const unsigned int scif5_data_b_pins[] = { /* RXD, TXD */ - 18, 11, + RCAR_GP_PIN(0, 18), RCAR_GP_PIN(0, 11), }; static const unsigned int scif5_data_b_mux[] = { RX5_B_MARK, TX5_B_MARK, }; static const unsigned int scif5_clk_b_pins[] = { /* SCK */ - 19, + RCAR_GP_PIN(0, 19), }; static const unsigned int scif5_clk_b_mux[] = { SCK5_B_MARK, }; static const unsigned int scif5_data_c_pins[] = { /* RXD, TXD */ - 24, 23, + RCAR_GP_PIN(0, 24), RCAR_GP_PIN(0, 23), }; static const unsigned int scif5_data_c_mux[] = { RX5_C_MARK, TX5_C_MARK, }; static const unsigned int scif5_clk_c_pins[] = { /* SCK */ - 28, + RCAR_GP_PIN(0, 28), }; static const unsigned int scif5_clk_c_mux[] = { SCK5_C_MARK, }; static const unsigned int scif5_data_d_pins[] = { /* RXD, TXD */ - 8, 6, + RCAR_GP_PIN(0, 8), RCAR_GP_PIN(0, 6), }; static const unsigned int scif5_data_d_mux[] = { RX5_D_MARK, TX5_D_MARK, }; static const unsigned int scif5_clk_d_pins[] = { /* SCK */ - 7, + RCAR_GP_PIN(0, 7), }; static const unsigned int scif5_clk_d_mux[] = { SCK5_D_MARK, @@ -2214,35 +2277,36 @@ static const unsigned int scif5_clk_d_mux[] = { /* - SDHI0 ------------------------------------------------------------------ */ static const unsigned int sdhi0_data1_pins[] = { /* D0 */ - 117, + RCAR_GP_PIN(3, 21), }; static const unsigned int sdhi0_data1_mux[] = { SD0_DAT0_MARK, }; static const unsigned int sdhi0_data4_pins[] = { /* D[0:3] */ - 117, 118, 119, 120, + RCAR_GP_PIN(3, 21), RCAR_GP_PIN(3, 22), RCAR_GP_PIN(3, 23), + RCAR_GP_PIN(3, 24), }; static const unsigned int sdhi0_data4_mux[] = { SD0_DAT0_MARK, SD0_DAT1_MARK, SD0_DAT2_MARK, SD0_DAT3_MARK, }; static const unsigned int sdhi0_ctrl_pins[] = { /* CMD, CLK */ - 114, 113, + RCAR_GP_PIN(3, 18), RCAR_GP_PIN(3, 17), }; static const unsigned int sdhi0_ctrl_mux[] = { SD0_CMD_MARK, SD0_CLK_MARK, }; static const unsigned int sdhi0_cd_pins[] = { /* CD */ - 115, + RCAR_GP_PIN(3, 19), }; static const unsigned int sdhi0_cd_mux[] = { SD0_CD_MARK, }; static const unsigned int sdhi0_wp_pins[] = { /* WP */ - 116, + RCAR_GP_PIN(3, 20), }; static const unsigned int sdhi0_wp_mux[] = { SD0_WP_MARK, @@ -2250,35 +2314,36 @@ static const unsigned int sdhi0_wp_mux[] = { /* - SDHI1 ------------------------------------------------------------------ */ static const unsigned int sdhi1_data1_pins[] = { /* D0 */ - 19, + RCAR_GP_PIN(0, 19), }; static const unsigned int sdhi1_data1_mux[] = { SD1_DAT0_MARK, }; static const unsigned int sdhi1_data4_pins[] = { /* D[0:3] */ - 19, 20, 21, 2, + RCAR_GP_PIN(0, 19), RCAR_GP_PIN(0, 20), RCAR_GP_PIN(0, 21), + RCAR_GP_PIN(0, 2), }; static const unsigned int sdhi1_data4_mux[] = { SD1_DAT0_MARK, SD1_DAT1_MARK, SD1_DAT2_MARK, SD1_DAT3_MARK, }; static const unsigned int sdhi1_ctrl_pins[] = { /* CMD, CLK */ - 18, 17, + RCAR_GP_PIN(0, 18), RCAR_GP_PIN(0, 17), }; static const unsigned int sdhi1_ctrl_mux[] = { SD1_CMD_MARK, SD1_CLK_MARK, }; static const unsigned int sdhi1_cd_pins[] = { /* CD */ - 10, + RCAR_GP_PIN(0, 10), }; static const unsigned int sdhi1_cd_mux[] = { SD1_CD_MARK, }; static const unsigned int sdhi1_wp_pins[] = { /* WP */ - 11, + RCAR_GP_PIN(0, 11), }; static const unsigned int sdhi1_wp_mux[] = { SD1_WP_MARK, @@ -2286,35 +2351,36 @@ static const unsigned int sdhi1_wp_mux[] = { /* - SDHI2 ------------------------------------------------------------------ */ static const unsigned int sdhi2_data1_pins[] = { /* D0 */ - 97, + RCAR_GP_PIN(3, 1), }; static const unsigned int sdhi2_data1_mux[] = { SD2_DAT0_MARK, }; static const unsigned int sdhi2_data4_pins[] = { /* D[0:3] */ - 97, 98, 99, 100, + RCAR_GP_PIN(3, 1), RCAR_GP_PIN(3, 2), RCAR_GP_PIN(3, 3), + RCAR_GP_PIN(3, 4), }; static const unsigned int sdhi2_data4_mux[] = { SD2_DAT0_MARK, SD2_DAT1_MARK, SD2_DAT2_MARK, SD2_DAT3_MARK, }; static const unsigned int sdhi2_ctrl_pins[] = { /* CMD, CLK */ - 102, 101, + RCAR_GP_PIN(3, 6), RCAR_GP_PIN(3, 5), }; static const unsigned int sdhi2_ctrl_mux[] = { SD2_CMD_MARK, SD2_CLK_MARK, }; static const unsigned int sdhi2_cd_pins[] = { /* CD */ - 103, + RCAR_GP_PIN(3, 7), }; static const unsigned int sdhi2_cd_mux[] = { SD2_CD_MARK, }; static const unsigned int sdhi2_wp_pins[] = { /* WP */ - 104, + RCAR_GP_PIN(3, 8), }; static const unsigned int sdhi2_wp_mux[] = { SD2_WP_MARK, @@ -2322,35 +2388,36 @@ static const unsigned int sdhi2_wp_mux[] = { /* - SDHI3 ------------------------------------------------------------------ */ static const unsigned int sdhi3_data1_pins[] = { /* D0 */ - 50, + RCAR_GP_PIN(1, 18), }; static const unsigned int sdhi3_data1_mux[] = { SD3_DAT0_MARK, }; static const unsigned int sdhi3_data4_pins[] = { /* D[0:3] */ - 50, 51, 52, 53, + RCAR_GP_PIN(1, 18), RCAR_GP_PIN(1, 19), RCAR_GP_PIN(1, 20), + RCAR_GP_PIN(1, 21), }; static const unsigned int sdhi3_data4_mux[] = { SD3_DAT0_MARK, SD3_DAT1_MARK, SD3_DAT2_MARK, SD3_DAT3_MARK, }; static const unsigned int sdhi3_ctrl_pins[] = { /* CMD, CLK */ - 35, 34, + RCAR_GP_PIN(1, 3), RCAR_GP_PIN(1, 2), }; static const unsigned int sdhi3_ctrl_mux[] = { SD3_CMD_MARK, SD3_CLK_MARK, }; static const unsigned int sdhi3_cd_pins[] = { /* CD */ - 62, + RCAR_GP_PIN(1, 30), }; static const unsigned int sdhi3_cd_mux[] = { SD3_CD_MARK, }; static const unsigned int sdhi3_wp_pins[] = { /* WP */ - 64, + RCAR_GP_PIN(2, 0), }; static const unsigned int sdhi3_wp_mux[] = { SD3_WP_MARK, @@ -2358,14 +2425,14 @@ static const unsigned int sdhi3_wp_mux[] = { /* - USB0 ------------------------------------------------------------------- */ static const unsigned int usb0_pins[] = { /* PENC */ - 154, + RCAR_GP_PIN(4, 26), }; static const unsigned int usb0_mux[] = { USB_PENC0_MARK, }; static const unsigned int usb0_ovc_pins[] = { /* USB_OVC */ - 150 + RCAR_GP_PIN(4, 22), }; static const unsigned int usb0_ovc_mux[] = { USB_OVC0_MARK, @@ -2373,14 +2440,14 @@ static const unsigned int usb0_ovc_mux[] = { /* - USB1 ------------------------------------------------------------------- */ static const unsigned int usb1_pins[] = { /* PENC */ - 155, + RCAR_GP_PIN(4, 27), }; static const unsigned int usb1_mux[] = { USB_PENC1_MARK, }; static const unsigned int usb1_ovc_pins[] = { /* USB_OVC */ - 152, + RCAR_GP_PIN(4, 24), }; static const unsigned int usb1_ovc_mux[] = { USB_OVC1_MARK, @@ -2388,18 +2455,122 @@ static const unsigned int usb1_ovc_mux[] = { /* - USB2 ------------------------------------------------------------------- */ static const unsigned int usb2_pins[] = { /* PENC */ - 156, + RCAR_GP_PIN(4, 28), }; static const unsigned int usb2_mux[] = { USB_PENC2_MARK, }; static const unsigned int usb2_ovc_pins[] = { /* USB_OVC */ - 125, + RCAR_GP_PIN(3, 29), }; static const unsigned int usb2_ovc_mux[] = { USB_OVC2_MARK, }; +/* - VIN0 ------------------------------------------------------------------- */ +static const unsigned int vin0_data8_pins[] = { + /* D[0:7] */ + RCAR_GP_PIN(2, 6), RCAR_GP_PIN(2, 7), RCAR_GP_PIN(2, 8), + RCAR_GP_PIN(2, 9), RCAR_GP_PIN(2, 10), RCAR_GP_PIN(2, 11), + RCAR_GP_PIN(2, 12), RCAR_GP_PIN(2, 13), +}; +static const unsigned int vin0_data8_mux[] = { + VI0_DATA0_VI0_B0_MARK, VI0_DATA1_VI0_B1_MARK, VI0_DATA2_VI0_B2_MARK, + VI0_DATA3_VI0_B3_MARK, VI0_DATA4_VI0_B4_MARK, VI0_DATA5_VI0_B5_MARK, + VI0_DATA6_VI0_B6_MARK, VI0_DATA7_VI0_B7_MARK, +}; +static const unsigned int vin0_clk_pins[] = { + /* CLK */ + RCAR_GP_PIN(2, 1), +}; +static const unsigned int vin0_clk_mux[] = { + VI0_CLK_MARK, +}; +static const unsigned int vin0_sync_pins[] = { + /* HSYNC, VSYNC */ + RCAR_GP_PIN(2, 4), RCAR_GP_PIN(2, 5), +}; +static const unsigned int vin0_sync_mux[] = { + VI0_HSYNC_MARK, VI0_VSYNC_MARK, +}; +/* - VIN1 ------------------------------------------------------------------- */ +static const unsigned int vin1_data8_pins[] = { + /* D[0:7] */ + RCAR_GP_PIN(3, 1), RCAR_GP_PIN(3, 2), RCAR_GP_PIN(3, 3), + RCAR_GP_PIN(3, 4), RCAR_GP_PIN(3, 5), RCAR_GP_PIN(3, 6), + RCAR_GP_PIN(3, 7), RCAR_GP_PIN(3, 8), +}; +static const unsigned int vin1_data8_mux[] = { + VI1_DATA0_VI1_B0_MARK, VI1_DATA1_VI1_B1_MARK, VI1_DATA2_VI1_B2_MARK, + VI1_DATA3_VI1_B3_MARK, VI1_DATA4_VI1_B4_MARK, VI1_DATA5_VI1_B5_MARK, + VI1_DATA6_VI1_B6_MARK, VI1_DATA7_VI1_B7_MARK, +}; +static const unsigned int vin1_clk_pins[] = { + /* CLK */ + RCAR_GP_PIN(2, 30), +}; +static const unsigned int vin1_clk_mux[] = { + VI1_CLK_MARK, +}; +static const unsigned int vin1_sync_pins[] = { + /* HSYNC, VSYNC */ + RCAR_GP_PIN(2, 31), RCAR_GP_PIN(3, 0), +}; +static const unsigned int vin1_sync_mux[] = { + VI1_HSYNC_MARK, VI1_VSYNC_MARK, +}; +/* - VIN2 ------------------------------------------------------------------- */ +static const unsigned int vin2_data8_pins[] = { + /* D[0:7] */ + RCAR_GP_PIN(1, 2), RCAR_GP_PIN(1, 3), RCAR_GP_PIN(1, 10), + RCAR_GP_PIN(1, 11), RCAR_GP_PIN(1, 18), RCAR_GP_PIN(1, 19), + RCAR_GP_PIN(1, 31), RCAR_GP_PIN(2, 0), +}; +static const unsigned int vin2_data8_mux[] = { + VI2_DATA0_VI2_B0_MARK, VI2_DATA1_VI2_B1_MARK, VI2_DATA2_VI2_B2_MARK, + VI2_DATA3_VI2_B3_MARK, VI2_DATA4_VI2_B4_MARK, VI2_DATA5_VI2_B5_MARK, + VI2_DATA6_VI2_B6_MARK, VI2_DATA7_VI2_B7_MARK, +}; +static const unsigned int vin2_clk_pins[] = { + /* CLK */ + RCAR_GP_PIN(1, 30), +}; +static const unsigned int vin2_clk_mux[] = { + VI2_CLK_MARK, +}; +static const unsigned int vin2_sync_pins[] = { + /* HSYNC, VSYNC */ + RCAR_GP_PIN(1, 28), RCAR_GP_PIN(1, 29), +}; +static const unsigned int vin2_sync_mux[] = { + VI2_HSYNC_MARK, VI2_VSYNC_MARK, +}; +/* - VIN3 ------------------------------------------------------------------- */ +static const unsigned int vin3_data8_pins[] = { + /* D[0:7] */ + RCAR_GP_PIN(3, 9), RCAR_GP_PIN(3, 10), RCAR_GP_PIN(3, 11), + RCAR_GP_PIN(3, 12), RCAR_GP_PIN(3, 13), RCAR_GP_PIN(3, 14), + RCAR_GP_PIN(3, 15), RCAR_GP_PIN(3, 16), +}; +static const unsigned int vin3_data8_mux[] = { + VI3_DATA0_MARK, VI3_DATA1_MARK, VI3_DATA2_MARK, + VI3_DATA3_MARK, VI3_DATA4_MARK, VI3_DATA5_MARK, + VI3_DATA6_MARK, VI3_DATA7_MARK, +}; +static const unsigned int vin3_clk_pins[] = { + /* CLK */ + RCAR_GP_PIN(2, 31), +}; +static const unsigned int vin3_clk_mux[] = { + VI3_CLK_MARK, +}; +static const unsigned int vin3_sync_pins[] = { + /* HSYNC, VSYNC */ + RCAR_GP_PIN(1, 28), RCAR_GP_PIN(1, 29), +}; +static const unsigned int vin3_sync_mux[] = { + VI3_HSYNC_MARK, VI3_VSYNC_MARK, +}; static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(du0_rgb666), @@ -2419,6 +2590,9 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(du1_sync_1), SH_PFC_PIN_GROUP(du1_oddf), SH_PFC_PIN_GROUP(du1_cde), + SH_PFC_PIN_GROUP(ether_rmii), + SH_PFC_PIN_GROUP(ether_link), + SH_PFC_PIN_GROUP(ether_magic), SH_PFC_PIN_GROUP(hspi0), SH_PFC_PIN_GROUP(hspi1), SH_PFC_PIN_GROUP(hspi1_b), @@ -2527,6 +2701,18 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(usb1_ovc), SH_PFC_PIN_GROUP(usb2), SH_PFC_PIN_GROUP(usb2_ovc), + SH_PFC_PIN_GROUP(vin0_data8), + SH_PFC_PIN_GROUP(vin0_clk), + SH_PFC_PIN_GROUP(vin0_sync), + SH_PFC_PIN_GROUP(vin1_data8), + SH_PFC_PIN_GROUP(vin1_clk), + SH_PFC_PIN_GROUP(vin1_sync), + SH_PFC_PIN_GROUP(vin2_data8), + SH_PFC_PIN_GROUP(vin2_clk), + SH_PFC_PIN_GROUP(vin2_sync), + SH_PFC_PIN_GROUP(vin3_data8), + SH_PFC_PIN_GROUP(vin3_clk), + SH_PFC_PIN_GROUP(vin3_sync), }; static const char * const du0_groups[] = { @@ -2552,6 +2738,12 @@ static const char * const du1_groups[] = { "du1_cde", }; +static const char * const ether_groups[] = { + "ether_rmii", + "ether_link", + "ether_magic", +}; + static const char * const hspi0_groups[] = { "hspi0", }; @@ -2720,9 +2912,34 @@ static const char * const usb2_groups[] = { "usb2_ovc", }; +static const char * const vin0_groups[] = { + "vin0_data8", + "vin0_clk", + "vin0_sync", +}; + +static const char * const vin1_groups[] = { + "vin1_data8", + "vin1_clk", + "vin1_sync", +}; + +static const char * const vin2_groups[] = { + "vin2_data8", + "vin2_clk", + "vin2_sync", +}; + +static const char * const vin3_groups[] = { + "vin3_data8", + "vin3_clk", + "vin3_sync", +}; + static const struct sh_pfc_function pinmux_functions[] = { SH_PFC_FUNCTION(du0), SH_PFC_FUNCTION(du1), + SH_PFC_FUNCTION(ether), SH_PFC_FUNCTION(hspi0), SH_PFC_FUNCTION(hspi1), SH_PFC_FUNCTION(hspi2), @@ -2743,6 +2960,10 @@ static const struct sh_pfc_function pinmux_functions[] = { SH_PFC_FUNCTION(usb0), SH_PFC_FUNCTION(usb1), SH_PFC_FUNCTION(usb2), + SH_PFC_FUNCTION(vin0), + SH_PFC_FUNCTION(vin1), + SH_PFC_FUNCTION(vin2), + SH_PFC_FUNCTION(vin3), }; static const struct pinmux_cfg_reg pinmux_config_regs[] = { @@ -3547,7 +3768,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = { /* SEL_SCIF [2] */ FN_SEL_SCIF_0, FN_SEL_SCIF_1, FN_SEL_SCIF_2, FN_SEL_SCIF_3, /* SEL_CANCLK [2] */ - FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, FN_SEL_CANCLK_2, + FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, FN_SEL_CANCLK_2, 0, /* SEL_CAN0 [1] */ FN_SEL_CAN0_0, FN_SEL_CAN0_1, /* SEL_HSCIF1 [1] */ diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c new file mode 100644 index 00000000000..85d77a417c0 --- /dev/null +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c @@ -0,0 +1,3835 @@ +/* + * R8A7790 processor support + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Magnus Damm + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/platform_data/gpio-rcar.h> + +#include "core.h" +#include "sh_pfc.h" + +#define PORT_GP_1(bank, pin, fn, sfx) fn(bank, pin, GP_##bank##_##pin, sfx) + +#define PORT_GP_32(bank, fn, sfx) \ + PORT_GP_1(bank, 0, fn, sfx), PORT_GP_1(bank, 1, fn, sfx), \ + PORT_GP_1(bank, 2, fn, sfx), PORT_GP_1(bank, 3, fn, sfx), \ + PORT_GP_1(bank, 4, fn, sfx), PORT_GP_1(bank, 5, fn, sfx), \ + PORT_GP_1(bank, 6, fn, sfx), PORT_GP_1(bank, 7, fn, sfx), \ + PORT_GP_1(bank, 8, fn, sfx), PORT_GP_1(bank, 9, fn, sfx), \ + PORT_GP_1(bank, 10, fn, sfx), PORT_GP_1(bank, 11, fn, sfx), \ + PORT_GP_1(bank, 12, fn, sfx), PORT_GP_1(bank, 13, fn, sfx), \ + PORT_GP_1(bank, 14, fn, sfx), PORT_GP_1(bank, 15, fn, sfx), \ + PORT_GP_1(bank, 16, fn, sfx), PORT_GP_1(bank, 17, fn, sfx), \ + PORT_GP_1(bank, 18, fn, sfx), PORT_GP_1(bank, 19, fn, sfx), \ + PORT_GP_1(bank, 20, fn, sfx), PORT_GP_1(bank, 21, fn, sfx), \ + PORT_GP_1(bank, 22, fn, sfx), PORT_GP_1(bank, 23, fn, sfx), \ + PORT_GP_1(bank, 24, fn, sfx), PORT_GP_1(bank, 25, fn, sfx), \ + PORT_GP_1(bank, 26, fn, sfx), PORT_GP_1(bank, 27, fn, sfx), \ + PORT_GP_1(bank, 28, fn, sfx), PORT_GP_1(bank, 29, fn, sfx), \ + PORT_GP_1(bank, 30, fn, sfx), PORT_GP_1(bank, 31, fn, sfx) + +#define PORT_GP_32_REV(bank, fn, sfx) \ + PORT_GP_1(bank, 31, fn, sfx), PORT_GP_1(bank, 30, fn, sfx), \ + PORT_GP_1(bank, 29, fn, sfx), PORT_GP_1(bank, 28, fn, sfx), \ + PORT_GP_1(bank, 27, fn, sfx), PORT_GP_1(bank, 26, fn, sfx), \ + PORT_GP_1(bank, 25, fn, sfx), PORT_GP_1(bank, 24, fn, sfx), \ + PORT_GP_1(bank, 23, fn, sfx), PORT_GP_1(bank, 22, fn, sfx), \ + PORT_GP_1(bank, 21, fn, sfx), PORT_GP_1(bank, 20, fn, sfx), \ + PORT_GP_1(bank, 19, fn, sfx), PORT_GP_1(bank, 18, fn, sfx), \ + PORT_GP_1(bank, 17, fn, sfx), PORT_GP_1(bank, 16, fn, sfx), \ + PORT_GP_1(bank, 15, fn, sfx), PORT_GP_1(bank, 14, fn, sfx), \ + PORT_GP_1(bank, 13, fn, sfx), PORT_GP_1(bank, 12, fn, sfx), \ + PORT_GP_1(bank, 11, fn, sfx), PORT_GP_1(bank, 10, fn, sfx), \ + PORT_GP_1(bank, 9, fn, sfx), PORT_GP_1(bank, 8, fn, sfx), \ + PORT_GP_1(bank, 7, fn, sfx), PORT_GP_1(bank, 6, fn, sfx), \ + PORT_GP_1(bank, 5, fn, sfx), PORT_GP_1(bank, 4, fn, sfx), \ + PORT_GP_1(bank, 3, fn, sfx), PORT_GP_1(bank, 2, fn, sfx), \ + PORT_GP_1(bank, 1, fn, sfx), PORT_GP_1(bank, 0, fn, sfx) + +#define CPU_ALL_PORT(fn, sfx) \ + PORT_GP_32(0, fn, sfx), \ + PORT_GP_32(1, fn, sfx), \ + PORT_GP_32(2, fn, sfx), \ + PORT_GP_32(3, fn, sfx), \ + PORT_GP_32(4, fn, sfx), \ + PORT_GP_32(5, fn, sfx) + +#define _GP_PORT_ALL(bank, pin, name, sfx) name##_##sfx + +#define _GP_GPIO(bank, pin, _name, sfx) \ + [(bank * 32) + pin] = { \ + .name = __stringify(_name), \ + .enum_id = _name##_DATA, \ + } + +#define _GP_DATA(bank, pin, name, sfx) \ + PINMUX_DATA(name##_DATA, name##_FN) + +#define GP_ALL(str) CPU_ALL_PORT(_GP_PORT_ALL, str) +#define PINMUX_GPIO_GP_ALL() CPU_ALL_PORT(_GP_GPIO, unused) +#define PINMUX_DATA_GP_ALL() CPU_ALL_PORT(_GP_DATA, unused) + +#define PINMUX_IPSR_DATA(ipsr, fn) PINMUX_DATA(fn##_MARK, FN_##ipsr, FN_##fn) +#define PINMUX_IPSR_MODSEL_DATA(ipsr, fn, ms) PINMUX_DATA(fn##_MARK, FN_##ms, \ + FN_##ipsr, FN_##fn) + +enum { + PINMUX_RESERVED = 0, + + PINMUX_DATA_BEGIN, + GP_ALL(DATA), + PINMUX_DATA_END, + + PINMUX_FUNCTION_BEGIN, + GP_ALL(FN), + + /* GPSR0 */ + FN_IP0_2_0, FN_IP0_5_3, FN_IP0_8_6, FN_IP0_11_9, FN_IP0_15_12, + FN_IP0_19_16, FN_IP0_22_20, FN_IP0_26_23, FN_IP0_30_27, + FN_IP1_3_0, FN_IP1_7_4, FN_IP1_11_8, FN_IP1_14_12, + FN_IP1_17_15, FN_IP1_21_18, FN_IP1_25_22, FN_IP1_27_26, + FN_IP1_29_28, FN_IP2_2_0, FN_IP2_5_3, FN_IP2_8_6, FN_IP2_11_9, + FN_IP2_14_12, FN_IP2_17_15, FN_IP2_21_18, FN_IP2_25_22, + FN_IP2_28_26, FN_IP3_3_0, FN_IP3_7_4, FN_IP3_11_8, + FN_IP3_14_12, FN_IP3_17_15, + + /* GPSR1 */ + FN_IP3_19_18, FN_IP3_22_20, FN_IP3_25_23, FN_IP3_28_26, + FN_IP3_31_29, FN_IP4_2_0, FN_IP4_5_3, FN_IP4_8_6, FN_IP4_11_9, + FN_IP4_14_12, FN_IP4_17_15, FN_IP4_20_18, FN_IP4_23_21, + FN_IP4_26_24, FN_IP4_29_27, FN_IP5_2_0, FN_IP5_5_3, FN_IP5_9_6, + FN_IP5_12_10, FN_IP5_14_13, FN_IP5_17_15, FN_IP5_20_18, + FN_IP5_23_21, FN_IP5_26_24, FN_IP5_29_27, FN_IP6_2_0, + FN_IP6_5_3, FN_IP6_8_6, FN_IP6_10_9, FN_IP6_13_11, + + /* GPSR2 */ + FN_IP7_28_27, FN_IP7_30_29, FN_IP8_1_0, FN_IP8_3_2, FN_IP8_5_4, + FN_IP8_7_6, FN_IP8_9_8, FN_IP8_11_10, FN_IP8_13_12, FN_IP8_15_14, + FN_IP8_17_16, FN_IP8_19_18, FN_IP8_21_20, FN_IP8_23_22, + FN_IP8_25_24, FN_IP8_26, FN_IP8_27, FN_VI1_DATA7_VI1_B7, + FN_IP6_16_14, FN_IP6_19_17, FN_IP6_22_20, FN_IP6_25_23, + FN_IP6_28_26, FN_IP6_31_29, FN_IP7_2_0, FN_IP7_5_3, FN_IP7_7_6, + FN_IP7_9_8, FN_IP7_12_10, FN_IP7_15_13, + + /* GPSR3 */ + FN_IP8_28, FN_IP8_30_29, FN_IP9_1_0, FN_IP9_3_2, FN_IP9_5_4, + FN_IP9_7_6, FN_IP9_11_8, FN_IP9_15_12, FN_IP9_17_16, FN_IP9_19_18, + FN_IP9_21_20, FN_IP9_23_22, FN_IP9_25_24, FN_IP9_27_26, + FN_IP9_31_28, FN_IP10_3_0, FN_IP10_6_4, FN_IP10_10_7, FN_IP10_14_11, + FN_IP10_18_15, FN_IP10_22_19, FN_IP10_25_23, FN_IP10_29_26, + FN_IP11_3_0, FN_IP11_4, FN_IP11_6_5, FN_IP11_8_7, FN_IP11_10_9, + FN_IP11_12_11, FN_IP11_14_13, FN_IP11_17_15, FN_IP11_21_18, + + /* GPSR4 */ + FN_IP11_23_22, FN_IP11_26_24, FN_IP11_29_27, FN_IP11_31_30, + FN_IP12_1_0, FN_IP12_3_2, FN_IP12_5_4, FN_IP12_7_6, FN_IP12_10_8, + FN_IP12_13_11, FN_IP12_16_14, FN_IP12_19_17, FN_IP12_22_20, + FN_IP12_24_23, FN_IP12_27_25, FN_IP12_30_28, FN_IP13_2_0, + FN_IP13_6_3, FN_IP13_9_7, FN_IP13_12_10, FN_IP13_15_13, + FN_IP13_18_16, FN_IP13_22_19, FN_IP13_25_23, FN_IP13_28_26, + FN_IP13_30_29, FN_IP14_2_0, FN_IP14_5_3, FN_IP14_8_6, FN_IP14_11_9, + FN_IP14_15_12, FN_IP14_18_16, + + /* GPSR5 */ + FN_IP14_21_19, FN_IP14_24_22, FN_IP14_27_25, FN_IP14_30_28, + FN_IP15_2_0, FN_IP15_5_3, FN_IP15_8_6, FN_IP15_11_9, FN_IP15_13_12, + FN_IP15_15_14, FN_IP15_17_16, FN_IP15_19_18, FN_IP15_22_20, + FN_IP15_25_23, FN_IP15_27_26, FN_IP15_29_28, FN_IP16_2_0, + FN_IP16_5_3, FN_USB0_PWEN, FN_USB0_OVC_VBUS, FN_IP16_6, FN_IP16_7, + FN_USB2_PWEN, FN_USB2_OVC, FN_AVS1, FN_AVS2, FN_DU_DOTCLKIN0, + FN_IP7_26_25, FN_DU_DOTCLKIN2, FN_IP7_18_16, FN_IP7_21_19, FN_IP7_24_22, + + /* IPSR0 */ + FN_D0, FN_MSIOF3_SCK_B, FN_VI3_DATA0, FN_VI0_G4, FN_VI0_G4_B, + FN_D1, FN_MSIOF3_SYNC_B, FN_VI3_DATA1, FN_VI0_G5, + FN_VI0_G5_B, FN_D2, FN_MSIOF3_RXD_B, FN_VI3_DATA2, + FN_VI0_G6, FN_VI0_G6_B, FN_D3, FN_MSIOF3_TXD_B, + FN_VI3_DATA3, FN_VI0_G7, FN_VI0_G7_B, FN_D4, + FN_SCIFB1_RXD_F, FN_SCIFB0_RXD_C, FN_VI3_DATA4, + FN_VI0_R0, FN_VI0_R0_B, FN_RX0_B, FN_D5, + FN_SCIFB1_TXD_F, FN_SCIFB0_TXD_C, FN_VI3_DATA5, + FN_VI0_R1, FN_VI0_R1_B, FN_TX0_B, FN_D6, + FN_SCL2_C, FN_VI3_DATA6, FN_VI0_R2, FN_VI0_R2_B, + FN_SCL2_CIS_C, FN_D7, FN_AD_DI_B, FN_SDA2_C, + FN_VI3_DATA7, FN_VI0_R3, FN_VI0_R3_B, FN_SDA2_CIS_C, + FN_D8, FN_SCIFA1_SCK_C, FN_AVB_TXD0, FN_MII_TXD0, + FN_VI0_G0, FN_VI0_G0_B, FN_VI2_DATA0_VI2_B0, + + /* IPSR1 */ + FN_D9, FN_SCIFA1_RXD_C, FN_AVB_TXD1, FN_MII_TXD1, + FN_VI0_G1, FN_VI0_G1_B, FN_VI2_DATA1_VI2_B1, FN_D10, + FN_SCIFA1_TXD_C, FN_AVB_TXD2, FN_MII_TXD2, + FN_VI0_G2, FN_VI0_G2_B, FN_VI2_DATA2_VI2_B2, FN_D11, + FN_SCIFA1_CTS_N_C, FN_AVB_TXD3, FN_MII_TXD3, + FN_VI0_G3, FN_VI0_G3_B, FN_VI2_DATA3_VI2_B3, + FN_D12, FN_SCIFA1_RTS_N_C, FN_AVB_TXD4, + FN_VI0_HSYNC_N, FN_VI0_HSYNC_N_B, FN_VI2_DATA4_VI2_B4, + FN_D13, FN_AVB_TXD5, FN_VI0_VSYNC_N, + FN_VI0_VSYNC_N_B, FN_VI2_DATA5_VI2_B5, FN_D14, + FN_SCIFB1_RXD_C, FN_AVB_TXD6, FN_RX1_B, + FN_VI0_CLKENB, FN_VI0_CLKENB_B, FN_VI2_DATA6_VI2_B6, + FN_D15, FN_SCIFB1_TXD_C, FN_AVB_TXD7, FN_TX1_B, + FN_VI0_FIELD, FN_VI0_FIELD_B, FN_VI2_DATA7_VI2_B7, + FN_A0, FN_PWM3, FN_A1, FN_PWM4, + + /* IPSR2 */ + FN_A2, FN_PWM5, FN_MSIOF1_SS1_B, FN_A3, + FN_PWM6, FN_MSIOF1_SS2_B, FN_A4, FN_MSIOF1_TXD_B, + FN_TPU0TO0, FN_A5, FN_SCIFA1_TXD_B, FN_TPU0TO1, + FN_A6, FN_SCIFA1_RTS_N_B, FN_TPU0TO2, FN_A7, + FN_SCIFA1_SCK_B, FN_AUDIO_CLKOUT_B, FN_TPU0TO3, + FN_A8, FN_SCIFA1_RXD_B, FN_SSI_SCK5_B, FN_VI0_R4, + FN_VI0_R4_B, FN_SCIFB2_RXD_C, FN_VI2_DATA0_VI2_B0_B, + FN_A9, FN_SCIFA1_CTS_N_B, FN_SSI_WS5_B, FN_VI0_R5, + FN_VI0_R5_B, FN_SCIFB2_TXD_C, FN_VI2_DATA1_VI2_B1_B, + FN_A10, FN_SSI_SDATA5_B, FN_MSIOF2_SYNC, FN_VI0_R6, + FN_VI0_R6_B, FN_VI2_DATA2_VI2_B2_B, + + /* IPSR3 */ + FN_A11, FN_SCIFB2_CTS_N_B, FN_MSIOF2_SCK, FN_VI1_R0, + FN_VI1_R0_B, FN_VI2_G0, FN_VI2_DATA3_VI2_B3_B, + FN_A12, FN_SCIFB2_RXD_B, FN_MSIOF2_TXD, FN_VI1_R1, + FN_VI1_R1_B, FN_VI2_G1, FN_VI2_DATA4_VI2_B4_B, + FN_A13, FN_SCIFB2_RTS_N_B, FN_EX_WAIT2, + FN_MSIOF2_RXD, FN_VI1_R2, FN_VI1_R2_B, FN_VI2_G2, + FN_VI2_DATA5_VI2_B5_B, FN_A14, FN_SCIFB2_TXD_B, + FN_ATACS11_N, FN_MSIOF2_SS1, FN_A15, FN_SCIFB2_SCK_B, + FN_ATARD1_N, FN_MSIOF2_SS2, FN_A16, FN_ATAWR1_N, + FN_A17, FN_AD_DO_B, FN_ATADIR1_N, FN_A18, + FN_AD_CLK_B, FN_ATAG1_N, FN_A19, FN_AD_NCS_N_B, + FN_ATACS01_N, FN_EX_WAIT0_B, FN_A20, FN_SPCLK, + FN_VI1_R3, FN_VI1_R3_B, FN_VI2_G4, + + /* IPSR4 */ + FN_A21, FN_MOSI_IO0, FN_VI1_R4, FN_VI1_R4_B, FN_VI2_G5, + FN_A22, FN_MISO_IO1, FN_VI1_R5, FN_VI1_R5_B, + FN_VI2_G6, FN_A23, FN_IO2, FN_VI1_G7, + FN_VI1_G7_B, FN_VI2_G7, FN_A24, FN_IO3, + FN_VI1_R7, FN_VI1_R7_B, FN_VI2_CLKENB, + FN_VI2_CLKENB_B, FN_A25, FN_SSL, FN_VI1_G6, + FN_VI1_G6_B, FN_VI2_FIELD, FN_VI2_FIELD_B, FN_CS0_N, + FN_VI1_R6, FN_VI1_R6_B, FN_VI2_G3, FN_MSIOF0_SS2_B, + FN_CS1_N_A26, FN_SPEEDIN, FN_VI0_R7, FN_VI0_R7_B, + FN_VI2_CLK, FN_VI2_CLK_B, FN_EX_CS0_N, FN_HRX1_B, + FN_VI1_G5, FN_VI1_G5_B, FN_VI2_R0, FN_HTX0_B, + FN_MSIOF0_SS1_B, FN_EX_CS1_N, FN_GPS_CLK, + FN_HCTS1_N_B, FN_VI1_FIELD, FN_VI1_FIELD_B, + FN_VI2_R1, FN_EX_CS2_N, FN_GPS_SIGN, FN_HRTS1_N_B, + FN_VI3_CLKENB, FN_VI1_G0, FN_VI1_G0_B, FN_VI2_R2, + + /* IPSR5 */ + FN_EX_CS3_N, FN_GPS_MAG, FN_VI3_FIELD, FN_VI1_G1, FN_VI1_G1_B, + FN_VI2_R3, FN_EX_CS4_N, FN_MSIOF1_SCK_B, FN_VI3_HSYNC_N, + FN_VI2_HSYNC_N, FN_SCL1, FN_VI2_HSYNC_N_B, + FN_INTC_EN0_N, FN_SCL1_CIS, FN_EX_CS5_N, FN_CAN0_RX, + FN_MSIOF1_RXD_B, FN_VI3_VSYNC_N, FN_VI1_G2, + FN_VI1_G2_B, FN_VI2_R4, FN_SDA1, FN_INTC_EN1_N, + FN_SDA1_CIS, FN_BS_N, FN_IETX, FN_HTX1_B, + FN_CAN1_TX, FN_DRACK0, FN_IETX_C, FN_RD_N, + FN_CAN0_TX, FN_SCIFA0_SCK_B, FN_RD_WR_N, FN_VI1_G3, + FN_VI1_G3_B, FN_VI2_R5, FN_SCIFA0_RXD_B, + FN_INTC_IRQ4_N, FN_WE0_N, FN_IECLK, FN_CAN_CLK, + FN_VI2_VSYNC_N, FN_SCIFA0_TXD_B, FN_VI2_VSYNC_N_B, + FN_WE1_N, FN_IERX, FN_CAN1_RX, FN_VI1_G4, + FN_VI1_G4_B, FN_VI2_R6, FN_SCIFA0_CTS_N_B, + FN_IERX_C, FN_EX_WAIT0, FN_IRQ3, FN_INTC_IRQ3_N, + FN_VI3_CLK, FN_SCIFA0_RTS_N_B, FN_HRX0_B, + FN_MSIOF0_SCK_B, FN_DREQ0_N, FN_VI1_HSYNC_N, + FN_VI1_HSYNC_N_B, FN_VI2_R7, FN_SSI_SCK78_C, + FN_SSI_WS78_B, + + /* IPSR6 */ + FN_DACK0, FN_IRQ0, FN_INTC_IRQ0_N, FN_SSI_SCK6_B, + FN_VI1_VSYNC_N, FN_VI1_VSYNC_N_B, FN_SSI_WS78_C, + FN_DREQ1_N, FN_VI1_CLKENB, FN_VI1_CLKENB_B, + FN_SSI_SDATA7_C, FN_SSI_SCK78_B, FN_DACK1, FN_IRQ1, + FN_INTC_IRQ1_N, FN_SSI_WS6_B, FN_SSI_SDATA8_C, + FN_DREQ2_N, FN_HSCK1_B, FN_HCTS0_N_B, + FN_MSIOF0_TXD_B, FN_DACK2, FN_IRQ2, FN_INTC_IRQ2_N, + FN_SSI_SDATA6_B, FN_HRTS0_N_B, FN_MSIOF0_RXD_B, + FN_ETH_CRS_DV, FN_RMII_CRS_DV, FN_STP_ISCLK_0_B, + FN_TS_SDEN0_D, FN_GLO_Q0_C, FN_SCL2_E, + FN_SCL2_CIS_E, FN_ETH_RX_ER, FN_RMII_RX_ER, + FN_STP_ISD_0_B, FN_TS_SPSYNC0_D, FN_GLO_Q1_C, + FN_SDA2_E, FN_SDA2_CIS_E, FN_ETH_RXD0, FN_RMII_RXD0, + FN_STP_ISEN_0_B, FN_TS_SDAT0_D, FN_GLO_I0_C, + FN_SCIFB1_SCK_G, FN_SCK1_E, FN_ETH_RXD1, + FN_RMII_RXD1, FN_HRX0_E, FN_STP_ISSYNC_0_B, + FN_TS_SCK0_D, FN_GLO_I1_C, FN_SCIFB1_RXD_G, + FN_RX1_E, FN_ETH_LINK, FN_RMII_LINK, FN_HTX0_E, + FN_STP_IVCXO27_0_B, FN_SCIFB1_TXD_G, FN_TX1_E, + FN_ETH_REF_CLK, FN_RMII_REF_CLK, FN_HCTS0_N_E, + FN_STP_IVCXO27_1_B, FN_HRX0_F, + + /* IPSR7 */ + FN_ETH_MDIO, FN_RMII_MDIO, FN_HRTS0_N_E, + FN_SIM0_D_C, FN_HCTS0_N_F, FN_ETH_TXD1, + FN_RMII_TXD1, FN_HTX0_F, FN_BPFCLK_G, FN_RDS_CLK_F, + FN_ETH_TX_EN, FN_RMII_TX_EN, FN_SIM0_CLK_C, + FN_HRTS0_N_F, FN_ETH_MAGIC, FN_RMII_MAGIC, + FN_SIM0_RST_C, FN_ETH_TXD0, FN_RMII_TXD0, + FN_STP_ISCLK_1_B, FN_TS_SDEN1_C, FN_GLO_SCLK_C, + FN_ETH_MDC, FN_RMII_MDC, FN_STP_ISD_1_B, + FN_TS_SPSYNC1_C, FN_GLO_SDATA_C, FN_PWM0, + FN_SCIFA2_SCK_C, FN_STP_ISEN_1_B, FN_TS_SDAT1_C, + FN_GLO_SS_C, FN_PWM1, FN_SCIFA2_TXD_C, + FN_STP_ISSYNC_1_B, FN_TS_SCK1_C, FN_GLO_RFON_C, + FN_PCMOE_N, FN_PWM2, FN_PWMFSW0, FN_SCIFA2_RXD_C, + FN_PCMWE_N, FN_IECLK_C, FN_DU1_DOTCLKIN, + FN_AUDIO_CLKC, FN_AUDIO_CLKOUT_C, FN_VI0_CLK, + FN_ATACS00_N, FN_AVB_RXD1, FN_MII_RXD1, + FN_VI0_DATA0_VI0_B0, FN_ATACS10_N, FN_AVB_RXD2, + FN_MII_RXD2, + + /* IPSR8 */ + FN_VI0_DATA1_VI0_B1, FN_ATARD0_N, FN_AVB_RXD3, + FN_MII_RXD3, FN_VI0_DATA2_VI0_B2, FN_ATAWR0_N, + FN_AVB_RXD4, FN_VI0_DATA3_VI0_B3, FN_ATADIR0_N, + FN_AVB_RXD5, FN_VI0_DATA4_VI0_B4, FN_ATAG0_N, + FN_AVB_RXD6, FN_VI0_DATA5_VI0_B5, FN_EX_WAIT1, + FN_AVB_RXD7, FN_VI0_DATA6_VI0_B6, FN_AVB_RX_ER, + FN_MII_RX_ER, FN_VI0_DATA7_VI0_B7, FN_AVB_RX_CLK, + FN_MII_RX_CLK, FN_VI1_CLK, FN_AVB_RX_DV, + FN_MII_RX_DV, FN_VI1_DATA0_VI1_B0, FN_SCIFA1_SCK_D, + FN_AVB_CRS, FN_MII_CRS, FN_VI1_DATA1_VI1_B1, + FN_SCIFA1_RXD_D, FN_AVB_MDC, FN_MII_MDC, + FN_VI1_DATA2_VI1_B2, FN_SCIFA1_TXD_D, FN_AVB_MDIO, + FN_MII_MDIO, FN_VI1_DATA3_VI1_B3, FN_SCIFA1_CTS_N_D, + FN_AVB_GTX_CLK, FN_VI1_DATA4_VI1_B4, FN_SCIFA1_RTS_N_D, + FN_AVB_MAGIC, FN_MII_MAGIC, FN_VI1_DATA5_VI1_B5, + FN_AVB_PHY_INT, FN_VI1_DATA6_VI1_B6, FN_AVB_GTXREFCLK, + FN_SD0_CLK, FN_VI1_DATA0_VI1_B0_B, FN_SD0_CMD, + FN_SCIFB1_SCK_B, FN_VI1_DATA1_VI1_B1_B, + + /* IPSR9 */ + FN_SD0_DAT0, FN_SCIFB1_RXD_B, FN_VI1_DATA2_VI1_B2_B, + FN_SD0_DAT1, FN_SCIFB1_TXD_B, FN_VI1_DATA3_VI1_B3_B, + FN_SD0_DAT2, FN_SCIFB1_CTS_N_B, FN_VI1_DATA4_VI1_B4_B, + FN_SD0_DAT3, FN_SCIFB1_RTS_N_B, FN_VI1_DATA5_VI1_B5_B, + FN_SD0_CD, FN_MMC0_D6, FN_TS_SDEN0_B, FN_USB0_EXTP, + FN_GLO_SCLK, FN_VI1_DATA6_VI1_B6_B, FN_SCL1_B, + FN_SCL1_CIS_B, FN_VI2_DATA6_VI2_B6_B, FN_SD0_WP, + FN_MMC0_D7, FN_TS_SPSYNC0_B, FN_USB0_IDIN, + FN_GLO_SDATA, FN_VI1_DATA7_VI1_B7_B, FN_SDA1_B, + FN_SDA1_CIS_B, FN_VI2_DATA7_VI2_B7_B, FN_SD1_CLK, + FN_AVB_TX_EN, FN_MII_TX_EN, FN_SD1_CMD, + FN_AVB_TX_ER, FN_MII_TX_ER, FN_SCIFB0_SCK_B, + FN_SD1_DAT0, FN_AVB_TX_CLK, FN_MII_TX_CLK, + FN_SCIFB0_RXD_B, FN_SD1_DAT1, FN_AVB_LINK, + FN_MII_LINK, FN_SCIFB0_TXD_B, FN_SD1_DAT2, + FN_AVB_COL, FN_MII_COL, FN_SCIFB0_CTS_N_B, + FN_SD1_DAT3, FN_AVB_RXD0, FN_MII_RXD0, + FN_SCIFB0_RTS_N_B, FN_SD1_CD, FN_MMC1_D6, + FN_TS_SDEN1, FN_USB1_EXTP, FN_GLO_SS, FN_VI0_CLK_B, + FN_SCL2_D, FN_SCL2_CIS_D, FN_SIM0_CLK_B, + FN_VI3_CLK_B, + + /* IPSR10 */ + FN_SD1_WP, FN_MMC1_D7, FN_TS_SPSYNC1, FN_USB1_IDIN, + FN_GLO_RFON, FN_VI1_CLK_B, FN_SDA2_D, FN_SDA2_CIS_D, + FN_SIM0_D_B, FN_SD2_CLK, FN_MMC0_CLK, FN_SIM0_CLK, + FN_VI0_DATA0_VI0_B0_B, FN_TS_SDEN0_C, FN_GLO_SCLK_B, + FN_VI3_DATA0_B, FN_SD2_CMD, FN_MMC0_CMD, FN_SIM0_D, + FN_VI0_DATA1_VI0_B1_B, FN_SCIFB1_SCK_E, FN_SCK1_D, + FN_TS_SPSYNC0_C, FN_GLO_SDATA_B, FN_VI3_DATA1_B, + FN_SD2_DAT0, FN_MMC0_D0, FN_FMCLK_B, + FN_VI0_DATA2_VI0_B2_B, FN_SCIFB1_RXD_E, FN_RX1_D, + FN_TS_SDAT0_C, FN_GLO_SS_B, FN_VI3_DATA2_B, + FN_SD2_DAT1, FN_MMC0_D1, FN_FMIN_B, FN_RDS_DATA, + FN_VI0_DATA3_VI0_B3_B, FN_SCIFB1_TXD_E, FN_TX1_D, + FN_TS_SCK0_C, FN_GLO_RFON_B, FN_VI3_DATA3_B, + FN_SD2_DAT2, FN_MMC0_D2, FN_BPFCLK_B, FN_RDS_CLK, + FN_VI0_DATA4_VI0_B4_B, FN_HRX0_D, FN_TS_SDEN1_B, + FN_GLO_Q0_B, FN_VI3_DATA4_B, FN_SD2_DAT3, + FN_MMC0_D3, FN_SIM0_RST, FN_VI0_DATA5_VI0_B5_B, + FN_HTX0_D, FN_TS_SPSYNC1_B, FN_GLO_Q1_B, + FN_VI3_DATA5_B, FN_SD2_CD, FN_MMC0_D4, + FN_TS_SDAT0_B, FN_USB2_EXTP, FN_GLO_I0, + FN_VI0_DATA6_VI0_B6_B, FN_HCTS0_N_D, FN_TS_SDAT1_B, + FN_GLO_I0_B, FN_VI3_DATA6_B, + + /* IPSR11 */ + FN_SD2_WP, FN_MMC0_D5, FN_TS_SCK0_B, FN_USB2_IDIN, + FN_GLO_I1, FN_VI0_DATA7_VI0_B7_B, FN_HRTS0_N_D, + FN_TS_SCK1_B, FN_GLO_I1_B, FN_VI3_DATA7_B, + FN_SD3_CLK, FN_MMC1_CLK, FN_SD3_CMD, FN_MMC1_CMD, + FN_MTS_N, FN_SD3_DAT0, FN_MMC1_D0, FN_STM_N, + FN_SD3_DAT1, FN_MMC1_D1, FN_MDATA, FN_SD3_DAT2, + FN_MMC1_D2, FN_SDATA, FN_SD3_DAT3, FN_MMC1_D3, + FN_SCKZ, FN_SD3_CD, FN_MMC1_D4, FN_TS_SDAT1, + FN_VSP, FN_GLO_Q0, FN_SIM0_RST_B, FN_SD3_WP, + FN_MMC1_D5, FN_TS_SCK1, FN_GLO_Q1, FN_FMIN_C, + FN_RDS_DATA_B, FN_FMIN_E, FN_RDS_DATA_D, FN_FMIN_F, + FN_RDS_DATA_E, FN_MLB_CLK, FN_SCL2_B, FN_SCL2_CIS_B, + FN_MLB_SIG, FN_SCIFB1_RXD_D, FN_RX1_C, FN_SDA2_B, + FN_SDA2_CIS_B, FN_MLB_DAT, FN_SPV_EVEN, + FN_SCIFB1_TXD_D, FN_TX1_C, FN_BPFCLK_C, + FN_RDS_CLK_B, FN_SSI_SCK0129, FN_CAN_CLK_B, + FN_MOUT0, + + /* IPSR12 */ + FN_SSI_WS0129, FN_CAN0_TX_B, FN_MOUT1, + FN_SSI_SDATA0, FN_CAN0_RX_B, FN_MOUT2, + FN_SSI_SDATA1, FN_CAN1_TX_B, FN_MOUT5, + FN_SSI_SDATA2, FN_CAN1_RX_B, FN_SSI_SCK1, FN_MOUT6, + FN_SSI_SCK34, FN_STP_OPWM_0, FN_SCIFB0_SCK, + FN_MSIOF1_SCK, FN_CAN_DEBUG_HW_TRIGGER, FN_SSI_WS34, + FN_STP_IVCXO27_0, FN_SCIFB0_RXD, FN_MSIOF1_SYNC, + FN_CAN_STEP0, FN_SSI_SDATA3, FN_STP_ISCLK_0, + FN_SCIFB0_TXD, FN_MSIOF1_SS1, FN_CAN_TXCLK, + FN_SSI_SCK4, FN_STP_ISD_0, FN_SCIFB0_CTS_N, + FN_MSIOF1_SS2, FN_SSI_SCK5_C, FN_CAN_DEBUGOUT0, + FN_SSI_WS4, FN_STP_ISEN_0, FN_SCIFB0_RTS_N, + FN_MSIOF1_TXD, FN_SSI_WS5_C, FN_CAN_DEBUGOUT1, + FN_SSI_SDATA4, FN_STP_ISSYNC_0, FN_MSIOF1_RXD, + FN_CAN_DEBUGOUT2, FN_SSI_SCK5, FN_SCIFB1_SCK, + FN_IERX_B, FN_DU2_EXHSYNC_DU2_HSYNC, FN_QSTH_QHS, + FN_CAN_DEBUGOUT3, FN_SSI_WS5, FN_SCIFB1_RXD, + FN_IECLK_B, FN_DU2_EXVSYNC_DU2_VSYNC, FN_QSTB_QHE, + FN_CAN_DEBUGOUT4, + + /* IPSR13 */ + FN_SSI_SDATA5, FN_SCIFB1_TXD, FN_IETX_B, FN_DU2_DR2, + FN_LCDOUT2, FN_CAN_DEBUGOUT5, FN_SSI_SCK6, + FN_SCIFB1_CTS_N, FN_BPFCLK_D, FN_RDS_CLK_C, + FN_DU2_DR3, FN_LCDOUT3, FN_CAN_DEBUGOUT6, + FN_BPFCLK_F, FN_RDS_CLK_E, FN_SSI_WS6, + FN_SCIFB1_RTS_N, FN_CAN0_TX_D, FN_DU2_DR4, + FN_LCDOUT4, FN_CAN_DEBUGOUT7, FN_SSI_SDATA6, + FN_FMIN_D, FN_RDS_DATA_C, FN_DU2_DR5, FN_LCDOUT5, + FN_CAN_DEBUGOUT8, FN_SSI_SCK78, FN_STP_IVCXO27_1, + FN_SCK1, FN_SCIFA1_SCK, FN_DU2_DR6, FN_LCDOUT6, + FN_CAN_DEBUGOUT9, FN_SSI_WS78, FN_STP_ISCLK_1, + FN_SCIFB2_SCK, FN_SCIFA2_CTS_N, FN_DU2_DR7, + FN_LCDOUT7, FN_CAN_DEBUGOUT10, FN_SSI_SDATA7, + FN_STP_ISD_1, FN_SCIFB2_RXD, FN_SCIFA2_RTS_N, + FN_TCLK2, FN_QSTVA_QVS, FN_CAN_DEBUGOUT11, + FN_BPFCLK_E, FN_RDS_CLK_D, FN_SSI_SDATA7_B, + FN_FMIN_G, FN_RDS_DATA_F, FN_SSI_SDATA8, + FN_STP_ISEN_1, FN_SCIFB2_TXD, FN_CAN0_TX_C, + FN_CAN_DEBUGOUT12, FN_SSI_SDATA8_B, FN_SSI_SDATA9, + FN_STP_ISSYNC_1, FN_SCIFB2_CTS_N, FN_SSI_WS1, + FN_SSI_SDATA5_C, FN_CAN_DEBUGOUT13, FN_AUDIO_CLKA, + FN_SCIFB2_RTS_N, FN_CAN_DEBUGOUT14, + + /* IPSR14 */ + FN_AUDIO_CLKB, FN_SCIF_CLK, FN_CAN0_RX_D, + FN_DVC_MUTE, FN_CAN0_RX_C, FN_CAN_DEBUGOUT15, + FN_REMOCON, FN_SCIFA0_SCK, FN_HSCK1, FN_SCK0, + FN_MSIOF3_SS2, FN_DU2_DG2, FN_LCDOUT10, FN_SDA1_C, + FN_SDA1_CIS_C, FN_SCIFA0_RXD, FN_HRX1, FN_RX0, + FN_DU2_DR0, FN_LCDOUT0, FN_SCIFA0_TXD, FN_HTX1, + FN_TX0, FN_DU2_DR1, FN_LCDOUT1, FN_SCIFA0_CTS_N, + FN_HCTS1_N, FN_CTS0_N, FN_MSIOF3_SYNC, FN_DU2_DG3, + FN_LCDOUT11, FN_PWM0_B, FN_SCL1_C, FN_SCL1_CIS_C, + FN_SCIFA0_RTS_N, FN_HRTS1_N, FN_RTS0_N_TANS, + FN_MSIOF3_SS1, FN_DU2_DG0, FN_LCDOUT8, FN_PWM1_B, + FN_SCIFA1_RXD, FN_AD_DI, FN_RX1, + FN_DU2_EXODDF_DU2_ODDF_DISP_CDE, FN_QCPV_QDE, + FN_SCIFA1_TXD, FN_AD_DO, FN_TX1, FN_DU2_DG1, + FN_LCDOUT9, FN_SCIFA1_CTS_N, FN_AD_CLK, + FN_CTS1_N, FN_MSIOF3_RXD, FN_DU0_DOTCLKOUT, FN_QCLK, + FN_SCIFA1_RTS_N, FN_AD_NCS_N, FN_RTS1_N_TANS, + FN_MSIOF3_TXD, FN_DU1_DOTCLKOUT, FN_QSTVB_QVE, + FN_HRTS0_N_C, + + /* IPSR15 */ + FN_SCIFA2_SCK, FN_FMCLK, FN_MSIOF3_SCK, FN_DU2_DG7, + FN_LCDOUT15, FN_SCIF_CLK_B, FN_SCIFA2_RXD, FN_FMIN, + FN_DU2_DB0, FN_LCDOUT16, FN_SCL2, FN_SCL2_CIS, + FN_SCIFA2_TXD, FN_BPFCLK, FN_DU2_DB1, FN_LCDOUT17, + FN_SDA2, FN_SDA2_CIS, FN_HSCK0, FN_TS_SDEN0, + FN_DU2_DG4, FN_LCDOUT12, FN_HCTS0_N_C, FN_HRX0, + FN_DU2_DB2, FN_LCDOUT18, FN_HTX0, FN_DU2_DB3, + FN_LCDOUT19, FN_HCTS0_N, FN_SSI_SCK9, FN_DU2_DB4, + FN_LCDOUT20, FN_HRTS0_N, FN_SSI_WS9, FN_DU2_DB5, + FN_LCDOUT21, FN_MSIOF0_SCK, FN_TS_SDAT0, FN_ADICLK, + FN_DU2_DB6, FN_LCDOUT22, FN_MSIOF0_SYNC, FN_TS_SCK0, + FN_SSI_SCK2, FN_ADIDATA, FN_DU2_DB7, FN_LCDOUT23, + FN_SCIFA2_RXD_B, FN_MSIOF0_SS1, FN_ADICHS0, + FN_DU2_DG5, FN_LCDOUT13, FN_MSIOF0_TXD, FN_ADICHS1, + FN_DU2_DG6, FN_LCDOUT14, + + /* IPSR16 */ + FN_MSIOF0_SS2, FN_AUDIO_CLKOUT, FN_ADICHS2, + FN_DU2_DISP, FN_QPOLA, FN_HTX0_C, FN_SCIFA2_TXD_B, + FN_MSIOF0_RXD, FN_TS_SPSYNC0, FN_SSI_WS2, + FN_ADICS_SAMP, FN_DU2_CDE, FN_QPOLB, FN_HRX0_C, + FN_USB1_PWEN, FN_AUDIO_CLKOUT_D, FN_USB1_OVC, + FN_TCLK1_B, + + FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3, + FN_SEL_SCIF1_4, + FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2, + FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1, FN_SEL_SCIFB2_2, + FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1, FN_SEL_SCIFB1_2, FN_SEL_SCIFB1_3, + FN_SEL_SCIFB1_4, + FN_SEL_SCIFB1_5, FN_SEL_SCIFB1_6, + FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2, FN_SEL_SCIFA1_3, + FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, + FN_SEL_SCFA_0, FN_SEL_SCFA_1, + FN_SEL_SOF1_0, FN_SEL_SOF1_1, + FN_SEL_SSI7_0, FN_SEL_SSI7_1, FN_SEL_SSI7_2, + FN_SEL_SSI6_0, FN_SEL_SSI6_1, + FN_SEL_SSI5_0, FN_SEL_SSI5_1, FN_SEL_SSI5_2, + FN_SEL_VI3_0, FN_SEL_VI3_1, + FN_SEL_VI2_0, FN_SEL_VI2_1, + FN_SEL_VI1_0, FN_SEL_VI1_1, + FN_SEL_VI0_0, FN_SEL_VI0_1, + FN_SEL_TSIF1_0, FN_SEL_TSIF1_1, FN_SEL_TSIF1_2, + FN_SEL_LBS_0, FN_SEL_LBS_1, + FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3, + FN_SEL_SOF3_0, FN_SEL_SOF3_1, + FN_SEL_SOF0_0, FN_SEL_SOF0_1, + + FN_SEL_TMU1_0, FN_SEL_TMU1_1, + FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, + FN_SEL_SCIFCLK_0, FN_SEL_SCIFCLK_1, + FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3, + FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, + FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1, FN_SEL_SCIFA2_2, + FN_SEL_CAN1_0, FN_SEL_CAN1_1, + FN_SEL_ADI_0, FN_SEL_ADI_1, + FN_SEL_SSP_0, FN_SEL_SSP_1, + FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2, FN_SEL_FM_3, + FN_SEL_FM_4, FN_SEL_FM_5, FN_SEL_FM_6, + FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2, FN_SEL_HSCIF0_3, + FN_SEL_HSCIF0_4, FN_SEL_HSCIF0_5, + FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, + FN_SEL_RDS_0, FN_SEL_RDS_1, FN_SEL_RDS_2, + FN_SEL_RDS_3, FN_SEL_RDS_4, FN_SEL_RDS_5, + FN_SEL_SIM_0, FN_SEL_SIM_1, FN_SEL_SIM_2, + FN_SEL_SSI8_0, FN_SEL_SSI8_1, FN_SEL_SSI8_2, + + FN_SEL_IICDVFS_0, FN_SEL_IICDVFS_1, + FN_SEL_IIC0_0, FN_SEL_IIC0_1, + FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2, + FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3, + FN_SEL_IIC2_4, + FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2, + FN_SEL_I2C2_0, FN_SEL_I2C2_1, FN_SEL_I2C2_2, FN_SEL_I2C2_3, + FN_SEL_I2C2_4, + FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + + VI1_DATA7_VI1_B7_MARK, + + USB0_PWEN_MARK, USB0_OVC_VBUS_MARK, + USB2_PWEN_MARK, USB2_OVC_MARK, AVS1_MARK, AVS2_MARK, + DU_DOTCLKIN0_MARK, DU_DOTCLKIN2_MARK, + + D0_MARK, MSIOF3_SCK_B_MARK, VI3_DATA0_MARK, VI0_G4_MARK, VI0_G4_B_MARK, + D1_MARK, MSIOF3_SYNC_B_MARK, VI3_DATA1_MARK, VI0_G5_MARK, + VI0_G5_B_MARK, D2_MARK, MSIOF3_RXD_B_MARK, VI3_DATA2_MARK, + VI0_G6_MARK, VI0_G6_B_MARK, D3_MARK, MSIOF3_TXD_B_MARK, + VI3_DATA3_MARK, VI0_G7_MARK, VI0_G7_B_MARK, D4_MARK, + SCIFB1_RXD_F_MARK, SCIFB0_RXD_C_MARK, VI3_DATA4_MARK, + VI0_R0_MARK, VI0_R0_B_MARK, RX0_B_MARK, D5_MARK, + SCIFB1_TXD_F_MARK, SCIFB0_TXD_C_MARK, VI3_DATA5_MARK, + VI0_R1_MARK, VI0_R1_B_MARK, TX0_B_MARK, D6_MARK, + SCL2_C_MARK, VI3_DATA6_MARK, VI0_R2_MARK, VI0_R2_B_MARK, + SCL2_CIS_C_MARK, D7_MARK, AD_DI_B_MARK, SDA2_C_MARK, + VI3_DATA7_MARK, VI0_R3_MARK, VI0_R3_B_MARK, SDA2_CIS_C_MARK, + D8_MARK, SCIFA1_SCK_C_MARK, AVB_TXD0_MARK, MII_TXD0_MARK, + VI0_G0_MARK, VI0_G0_B_MARK, VI2_DATA0_VI2_B0_MARK, + + D9_MARK, SCIFA1_RXD_C_MARK, AVB_TXD1_MARK, MII_TXD1_MARK, + VI0_G1_MARK, VI0_G1_B_MARK, VI2_DATA1_VI2_B1_MARK, D10_MARK, + SCIFA1_TXD_C_MARK, AVB_TXD2_MARK, MII_TXD2_MARK, + VI0_G2_MARK, VI0_G2_B_MARK, VI2_DATA2_VI2_B2_MARK, D11_MARK, + SCIFA1_CTS_N_C_MARK, AVB_TXD3_MARK, MII_TXD3_MARK, + VI0_G3_MARK, VI0_G3_B_MARK, VI2_DATA3_VI2_B3_MARK, + D12_MARK, SCIFA1_RTS_N_C_MARK, AVB_TXD4_MARK, + VI0_HSYNC_N_MARK, VI0_HSYNC_N_B_MARK, VI2_DATA4_VI2_B4_MARK, + D13_MARK, AVB_TXD5_MARK, VI0_VSYNC_N_MARK, + VI0_VSYNC_N_B_MARK, VI2_DATA5_VI2_B5_MARK, D14_MARK, + SCIFB1_RXD_C_MARK, AVB_TXD6_MARK, RX1_B_MARK, + VI0_CLKENB_MARK, VI0_CLKENB_B_MARK, VI2_DATA6_VI2_B6_MARK, + D15_MARK, SCIFB1_TXD_C_MARK, AVB_TXD7_MARK, TX1_B_MARK, + VI0_FIELD_MARK, VI0_FIELD_B_MARK, VI2_DATA7_VI2_B7_MARK, + A0_MARK, PWM3_MARK, A1_MARK, PWM4_MARK, + + A2_MARK, PWM5_MARK, MSIOF1_SS1_B_MARK, A3_MARK, + PWM6_MARK, MSIOF1_SS2_B_MARK, A4_MARK, MSIOF1_TXD_B_MARK, + TPU0TO0_MARK, A5_MARK, SCIFA1_TXD_B_MARK, TPU0TO1_MARK, + A6_MARK, SCIFA1_RTS_N_B_MARK, TPU0TO2_MARK, A7_MARK, + SCIFA1_SCK_B_MARK, AUDIO_CLKOUT_B_MARK, TPU0TO3_MARK, + A8_MARK, SCIFA1_RXD_B_MARK, SSI_SCK5_B_MARK, VI0_R4_MARK, + VI0_R4_B_MARK, SCIFB2_RXD_C_MARK, VI2_DATA0_VI2_B0_B_MARK, + A9_MARK, SCIFA1_CTS_N_B_MARK, SSI_WS5_B_MARK, VI0_R5_MARK, + VI0_R5_B_MARK, SCIFB2_TXD_C_MARK, VI2_DATA1_VI2_B1_B_MARK, + A10_MARK, SSI_SDATA5_B_MARK, MSIOF2_SYNC_MARK, VI0_R6_MARK, + VI0_R6_B_MARK, VI2_DATA2_VI2_B2_B_MARK, + + A11_MARK, SCIFB2_CTS_N_B_MARK, MSIOF2_SCK_MARK, VI1_R0_MARK, + VI1_R0_B_MARK, VI2_G0_MARK, VI2_DATA3_VI2_B3_B_MARK, + A12_MARK, SCIFB2_RXD_B_MARK, MSIOF2_TXD_MARK, VI1_R1_MARK, + VI1_R1_B_MARK, VI2_G1_MARK, VI2_DATA4_VI2_B4_B_MARK, + A13_MARK, SCIFB2_RTS_N_B_MARK, EX_WAIT2_MARK, + MSIOF2_RXD_MARK, VI1_R2_MARK, VI1_R2_B_MARK, VI2_G2_MARK, + VI2_DATA5_VI2_B5_B_MARK, A14_MARK, SCIFB2_TXD_B_MARK, + ATACS11_N_MARK, MSIOF2_SS1_MARK, A15_MARK, SCIFB2_SCK_B_MARK, + ATARD1_N_MARK, MSIOF2_SS2_MARK, A16_MARK, ATAWR1_N_MARK, + A17_MARK, AD_DO_B_MARK, ATADIR1_N_MARK, A18_MARK, + AD_CLK_B_MARK, ATAG1_N_MARK, A19_MARK, AD_NCS_N_B_MARK, + ATACS01_N_MARK, EX_WAIT0_B_MARK, A20_MARK, SPCLK_MARK, + VI1_R3_MARK, VI1_R3_B_MARK, VI2_G4_MARK, + + A21_MARK, MOSI_IO0_MARK, VI1_R4_MARK, VI1_R4_B_MARK, VI2_G5_MARK, + A22_MARK, MISO_IO1_MARK, VI1_R5_MARK, VI1_R5_B_MARK, + VI2_G6_MARK, A23_MARK, IO2_MARK, VI1_G7_MARK, + VI1_G7_B_MARK, VI2_G7_MARK, A24_MARK, IO3_MARK, + VI1_R7_MARK, VI1_R7_B_MARK, VI2_CLKENB_MARK, + VI2_CLKENB_B_MARK, A25_MARK, SSL_MARK, VI1_G6_MARK, + VI1_G6_B_MARK, VI2_FIELD_MARK, VI2_FIELD_B_MARK, CS0_N_MARK, + VI1_R6_MARK, VI1_R6_B_MARK, VI2_G3_MARK, MSIOF0_SS2_B_MARK, + CS1_N_A26_MARK, SPEEDIN_MARK, VI0_R7_MARK, VI0_R7_B_MARK, + VI2_CLK_MARK, VI2_CLK_B_MARK, EX_CS0_N_MARK, HRX1_B_MARK, + VI1_G5_MARK, VI1_G5_B_MARK, VI2_R0_MARK, HTX0_B_MARK, + MSIOF0_SS1_B_MARK, EX_CS1_N_MARK, GPS_CLK_MARK, + HCTS1_N_B_MARK, VI1_FIELD_MARK, VI1_FIELD_B_MARK, + VI2_R1_MARK, EX_CS2_N_MARK, GPS_SIGN_MARK, HRTS1_N_B_MARK, + VI3_CLKENB_MARK, VI1_G0_MARK, VI1_G0_B_MARK, VI2_R2_MARK, + + EX_CS3_N_MARK, GPS_MAG_MARK, VI3_FIELD_MARK, + VI1_G1_MARK, VI1_G1_B_MARK, VI2_R3_MARK, + EX_CS4_N_MARK, MSIOF1_SCK_B_MARK, VI3_HSYNC_N_MARK, + VI2_HSYNC_N_MARK, SCL1_MARK, VI2_HSYNC_N_B_MARK, + INTC_EN0_N_MARK, SCL1_CIS_MARK, EX_CS5_N_MARK, CAN0_RX_MARK, + MSIOF1_RXD_B_MARK, VI3_VSYNC_N_MARK, VI1_G2_MARK, + VI1_G2_B_MARK, VI2_R4_MARK, SDA1_MARK, INTC_EN1_N_MARK, + SDA1_CIS_MARK, BS_N_MARK, IETX_MARK, HTX1_B_MARK, + CAN1_TX_MARK, DRACK0_MARK, IETX_C_MARK, RD_N_MARK, + CAN0_TX_MARK, SCIFA0_SCK_B_MARK, RD_WR_N_MARK, VI1_G3_MARK, + VI1_G3_B_MARK, VI2_R5_MARK, SCIFA0_RXD_B_MARK, + INTC_IRQ4_N_MARK, WE0_N_MARK, IECLK_MARK, CAN_CLK_MARK, + VI2_VSYNC_N_MARK, SCIFA0_TXD_B_MARK, VI2_VSYNC_N_B_MARK, + WE1_N_MARK, IERX_MARK, CAN1_RX_MARK, VI1_G4_MARK, + VI1_G4_B_MARK, VI2_R6_MARK, SCIFA0_CTS_N_B_MARK, + IERX_C_MARK, EX_WAIT0_MARK, IRQ3_MARK, INTC_IRQ3_N_MARK, + VI3_CLK_MARK, SCIFA0_RTS_N_B_MARK, HRX0_B_MARK, + MSIOF0_SCK_B_MARK, DREQ0_N_MARK, VI1_HSYNC_N_MARK, + VI1_HSYNC_N_B_MARK, VI2_R7_MARK, SSI_SCK78_C_MARK, + SSI_WS78_B_MARK, + + DACK0_MARK, IRQ0_MARK, INTC_IRQ0_N_MARK, SSI_SCK6_B_MARK, + VI1_VSYNC_N_MARK, VI1_VSYNC_N_B_MARK, SSI_WS78_C_MARK, + DREQ1_N_MARK, VI1_CLKENB_MARK, VI1_CLKENB_B_MARK, + SSI_SDATA7_C_MARK, SSI_SCK78_B_MARK, DACK1_MARK, IRQ1_MARK, + INTC_IRQ1_N_MARK, SSI_WS6_B_MARK, SSI_SDATA8_C_MARK, + DREQ2_N_MARK, HSCK1_B_MARK, HCTS0_N_B_MARK, + MSIOF0_TXD_B_MARK, DACK2_MARK, IRQ2_MARK, INTC_IRQ2_N_MARK, + SSI_SDATA6_B_MARK, HRTS0_N_B_MARK, MSIOF0_RXD_B_MARK, + ETH_CRS_DV_MARK, RMII_CRS_DV_MARK, STP_ISCLK_0_B_MARK, + TS_SDEN0_D_MARK, GLO_Q0_C_MARK, SCL2_E_MARK, + SCL2_CIS_E_MARK, ETH_RX_ER_MARK, RMII_RX_ER_MARK, + STP_ISD_0_B_MARK, TS_SPSYNC0_D_MARK, GLO_Q1_C_MARK, + SDA2_E_MARK, SDA2_CIS_E_MARK, ETH_RXD0_MARK, RMII_RXD0_MARK, + STP_ISEN_0_B_MARK, TS_SDAT0_D_MARK, GLO_I0_C_MARK, + SCIFB1_SCK_G_MARK, SCK1_E_MARK, ETH_RXD1_MARK, + RMII_RXD1_MARK, HRX0_E_MARK, STP_ISSYNC_0_B_MARK, + TS_SCK0_D_MARK, GLO_I1_C_MARK, SCIFB1_RXD_G_MARK, + RX1_E_MARK, ETH_LINK_MARK, RMII_LINK_MARK, HTX0_E_MARK, + STP_IVCXO27_0_B_MARK, SCIFB1_TXD_G_MARK, TX1_E_MARK, + ETH_REF_CLK_MARK, RMII_REF_CLK_MARK, HCTS0_N_E_MARK, + STP_IVCXO27_1_B_MARK, HRX0_F_MARK, + + ETH_MDIO_MARK, RMII_MDIO_MARK, HRTS0_N_E_MARK, + SIM0_D_C_MARK, HCTS0_N_F_MARK, ETH_TXD1_MARK, + RMII_TXD1_MARK, HTX0_F_MARK, BPFCLK_G_MARK, RDS_CLK_F_MARK, + ETH_TX_EN_MARK, RMII_TX_EN_MARK, SIM0_CLK_C_MARK, + HRTS0_N_F_MARK, ETH_MAGIC_MARK, RMII_MAGIC_MARK, + SIM0_RST_C_MARK, ETH_TXD0_MARK, RMII_TXD0_MARK, + STP_ISCLK_1_B_MARK, TS_SDEN1_C_MARK, GLO_SCLK_C_MARK, + ETH_MDC_MARK, RMII_MDC_MARK, STP_ISD_1_B_MARK, + TS_SPSYNC1_C_MARK, GLO_SDATA_C_MARK, PWM0_MARK, + SCIFA2_SCK_C_MARK, STP_ISEN_1_B_MARK, TS_SDAT1_C_MARK, + GLO_SS_C_MARK, PWM1_MARK, SCIFA2_TXD_C_MARK, + STP_ISSYNC_1_B_MARK, TS_SCK1_C_MARK, GLO_RFON_C_MARK, + PCMOE_N_MARK, PWM2_MARK, PWMFSW0_MARK, SCIFA2_RXD_C_MARK, + PCMWE_N_MARK, IECLK_C_MARK, DU1_DOTCLKIN_MARK, + AUDIO_CLKC_MARK, AUDIO_CLKOUT_C_MARK, VI0_CLK_MARK, + ATACS00_N_MARK, AVB_RXD1_MARK, MII_RXD1_MARK, + VI0_DATA0_VI0_B0_MARK, ATACS10_N_MARK, AVB_RXD2_MARK, + MII_RXD2_MARK, + + VI0_DATA1_VI0_B1_MARK, ATARD0_N_MARK, AVB_RXD3_MARK, + MII_RXD3_MARK, VI0_DATA2_VI0_B2_MARK, ATAWR0_N_MARK, + AVB_RXD4_MARK, VI0_DATA3_VI0_B3_MARK, ATADIR0_N_MARK, + AVB_RXD5_MARK, VI0_DATA4_VI0_B4_MARK, ATAG0_N_MARK, + AVB_RXD6_MARK, VI0_DATA5_VI0_B5_MARK, EX_WAIT1_MARK, + AVB_RXD7_MARK, VI0_DATA6_VI0_B6_MARK, AVB_RX_ER_MARK, + MII_RX_ER_MARK, VI0_DATA7_VI0_B7_MARK, AVB_RX_CLK_MARK, + MII_RX_CLK_MARK, VI1_CLK_MARK, AVB_RX_DV_MARK, + MII_RX_DV_MARK, VI1_DATA0_VI1_B0_MARK, SCIFA1_SCK_D_MARK, + AVB_CRS_MARK, MII_CRS_MARK, VI1_DATA1_VI1_B1_MARK, + SCIFA1_RXD_D_MARK, AVB_MDC_MARK, MII_MDC_MARK, + VI1_DATA2_VI1_B2_MARK, SCIFA1_TXD_D_MARK, AVB_MDIO_MARK, + MII_MDIO_MARK, VI1_DATA3_VI1_B3_MARK, SCIFA1_CTS_N_D_MARK, + AVB_GTX_CLK_MARK, VI1_DATA4_VI1_B4_MARK, SCIFA1_RTS_N_D_MARK, + AVB_MAGIC_MARK, MII_MAGIC_MARK, VI1_DATA5_VI1_B5_MARK, + AVB_PHY_INT_MARK, VI1_DATA6_VI1_B6_MARK, AVB_GTXREFCLK_MARK, + SD0_CLK_MARK, VI1_DATA0_VI1_B0_B_MARK, SD0_CMD_MARK, + SCIFB1_SCK_B_MARK, VI1_DATA1_VI1_B1_B_MARK, + + SD0_DAT0_MARK, SCIFB1_RXD_B_MARK, VI1_DATA2_VI1_B2_B_MARK, + SD0_DAT1_MARK, SCIFB1_TXD_B_MARK, VI1_DATA3_VI1_B3_B_MARK, + SD0_DAT2_MARK, SCIFB1_CTS_N_B_MARK, VI1_DATA4_VI1_B4_B_MARK, + SD0_DAT3_MARK, SCIFB1_RTS_N_B_MARK, VI1_DATA5_VI1_B5_B_MARK, + SD0_CD_MARK, MMC0_D6_MARK, TS_SDEN0_B_MARK, USB0_EXTP_MARK, + GLO_SCLK_MARK, VI1_DATA6_VI1_B6_B_MARK, SCL1_B_MARK, + SCL1_CIS_B_MARK, VI2_DATA6_VI2_B6_B_MARK, SD0_WP_MARK, + MMC0_D7_MARK, TS_SPSYNC0_B_MARK, USB0_IDIN_MARK, + GLO_SDATA_MARK, VI1_DATA7_VI1_B7_B_MARK, SDA1_B_MARK, + SDA1_CIS_B_MARK, VI2_DATA7_VI2_B7_B_MARK, SD1_CLK_MARK, + AVB_TX_EN_MARK, MII_TX_EN_MARK, SD1_CMD_MARK, + AVB_TX_ER_MARK, MII_TX_ER_MARK, SCIFB0_SCK_B_MARK, + SD1_DAT0_MARK, AVB_TX_CLK_MARK, MII_TX_CLK_MARK, + SCIFB0_RXD_B_MARK, SD1_DAT1_MARK, AVB_LINK_MARK, + MII_LINK_MARK, SCIFB0_TXD_B_MARK, SD1_DAT2_MARK, + AVB_COL_MARK, MII_COL_MARK, SCIFB0_CTS_N_B_MARK, + SD1_DAT3_MARK, AVB_RXD0_MARK, MII_RXD0_MARK, + SCIFB0_RTS_N_B_MARK, SD1_CD_MARK, MMC1_D6_MARK, + TS_SDEN1_MARK, USB1_EXTP_MARK, GLO_SS_MARK, VI0_CLK_B_MARK, + SCL2_D_MARK, SCL2_CIS_D_MARK, SIM0_CLK_B_MARK, + VI3_CLK_B_MARK, + + SD1_WP_MARK, MMC1_D7_MARK, TS_SPSYNC1_MARK, USB1_IDIN_MARK, + GLO_RFON_MARK, VI1_CLK_B_MARK, SDA2_D_MARK, SDA2_CIS_D_MARK, + SIM0_D_B_MARK, SD2_CLK_MARK, MMC0_CLK_MARK, SIM0_CLK_MARK, + VI0_DATA0_VI0_B0_B_MARK, TS_SDEN0_C_MARK, GLO_SCLK_B_MARK, + VI3_DATA0_B_MARK, SD2_CMD_MARK, MMC0_CMD_MARK, SIM0_D_MARK, + VI0_DATA1_VI0_B1_B_MARK, SCIFB1_SCK_E_MARK, SCK1_D_MARK, + TS_SPSYNC0_C_MARK, GLO_SDATA_B_MARK, VI3_DATA1_B_MARK, + SD2_DAT0_MARK, MMC0_D0_MARK, FMCLK_B_MARK, + VI0_DATA2_VI0_B2_B_MARK, SCIFB1_RXD_E_MARK, RX1_D_MARK, + TS_SDAT0_C_MARK, GLO_SS_B_MARK, VI3_DATA2_B_MARK, + SD2_DAT1_MARK, MMC0_D1_MARK, FMIN_B_MARK, RDS_DATA_MARK, + VI0_DATA3_VI0_B3_B_MARK, SCIFB1_TXD_E_MARK, TX1_D_MARK, + TS_SCK0_C_MARK, GLO_RFON_B_MARK, VI3_DATA3_B_MARK, + SD2_DAT2_MARK, MMC0_D2_MARK, BPFCLK_B_MARK, RDS_CLK_MARK, + VI0_DATA4_VI0_B4_B_MARK, HRX0_D_MARK, TS_SDEN1_B_MARK, + GLO_Q0_B_MARK, VI3_DATA4_B_MARK, SD2_DAT3_MARK, + MMC0_D3_MARK, SIM0_RST_MARK, VI0_DATA5_VI0_B5_B_MARK, + HTX0_D_MARK, TS_SPSYNC1_B_MARK, GLO_Q1_B_MARK, + VI3_DATA5_B_MARK, SD2_CD_MARK, MMC0_D4_MARK, + TS_SDAT0_B_MARK, USB2_EXTP_MARK, GLO_I0_MARK, + VI0_DATA6_VI0_B6_B_MARK, HCTS0_N_D_MARK, TS_SDAT1_B_MARK, + GLO_I0_B_MARK, VI3_DATA6_B_MARK, + + SD2_WP_MARK, MMC0_D5_MARK, TS_SCK0_B_MARK, USB2_IDIN_MARK, + GLO_I1_MARK, VI0_DATA7_VI0_B7_B_MARK, HRTS0_N_D_MARK, + TS_SCK1_B_MARK, GLO_I1_B_MARK, VI3_DATA7_B_MARK, + SD3_CLK_MARK, MMC1_CLK_MARK, SD3_CMD_MARK, MMC1_CMD_MARK, + MTS_N_MARK, SD3_DAT0_MARK, MMC1_D0_MARK, STM_N_MARK, + SD3_DAT1_MARK, MMC1_D1_MARK, MDATA_MARK, SD3_DAT2_MARK, + MMC1_D2_MARK, SDATA_MARK, SD3_DAT3_MARK, MMC1_D3_MARK, + SCKZ_MARK, SD3_CD_MARK, MMC1_D4_MARK, TS_SDAT1_MARK, + VSP_MARK, GLO_Q0_MARK, SIM0_RST_B_MARK, SD3_WP_MARK, + MMC1_D5_MARK, TS_SCK1_MARK, GLO_Q1_MARK, FMIN_C_MARK, + RDS_DATA_B_MARK, FMIN_E_MARK, RDS_DATA_D_MARK, FMIN_F_MARK, + RDS_DATA_E_MARK, MLB_CLK_MARK, SCL2_B_MARK, SCL2_CIS_B_MARK, + MLB_SIG_MARK, SCIFB1_RXD_D_MARK, RX1_C_MARK, SDA2_B_MARK, + SDA2_CIS_B_MARK, MLB_DAT_MARK, SPV_EVEN_MARK, + SCIFB1_TXD_D_MARK, TX1_C_MARK, BPFCLK_C_MARK, + RDS_CLK_B_MARK, SSI_SCK0129_MARK, CAN_CLK_B_MARK, + MOUT0_MARK, + + SSI_WS0129_MARK, CAN0_TX_B_MARK, MOUT1_MARK, + SSI_SDATA0_MARK, CAN0_RX_B_MARK, MOUT2_MARK, + SSI_SDATA1_MARK, CAN1_TX_B_MARK, MOUT5_MARK, + SSI_SDATA2_MARK, CAN1_RX_B_MARK, SSI_SCK1_MARK, MOUT6_MARK, + SSI_SCK34_MARK, STP_OPWM_0_MARK, SCIFB0_SCK_MARK, + MSIOF1_SCK_MARK, CAN_DEBUG_HW_TRIGGER_MARK, SSI_WS34_MARK, + STP_IVCXO27_0_MARK, SCIFB0_RXD_MARK, MSIOF1_SYNC_MARK, + CAN_STEP0_MARK, SSI_SDATA3_MARK, STP_ISCLK_0_MARK, + SCIFB0_TXD_MARK, MSIOF1_SS1_MARK, CAN_TXCLK_MARK, + SSI_SCK4_MARK, STP_ISD_0_MARK, SCIFB0_CTS_N_MARK, + MSIOF1_SS2_MARK, SSI_SCK5_C_MARK, CAN_DEBUGOUT0_MARK, + SSI_WS4_MARK, STP_ISEN_0_MARK, SCIFB0_RTS_N_MARK, + MSIOF1_TXD_MARK, SSI_WS5_C_MARK, CAN_DEBUGOUT1_MARK, + SSI_SDATA4_MARK, STP_ISSYNC_0_MARK, MSIOF1_RXD_MARK, + CAN_DEBUGOUT2_MARK, SSI_SCK5_MARK, SCIFB1_SCK_MARK, + IERX_B_MARK, DU2_EXHSYNC_DU2_HSYNC_MARK, QSTH_QHS_MARK, + CAN_DEBUGOUT3_MARK, SSI_WS5_MARK, SCIFB1_RXD_MARK, + IECLK_B_MARK, DU2_EXVSYNC_DU2_VSYNC_MARK, QSTB_QHE_MARK, + CAN_DEBUGOUT4_MARK, + + SSI_SDATA5_MARK, SCIFB1_TXD_MARK, IETX_B_MARK, DU2_DR2_MARK, + LCDOUT2_MARK, CAN_DEBUGOUT5_MARK, SSI_SCK6_MARK, + SCIFB1_CTS_N_MARK, BPFCLK_D_MARK, RDS_CLK_C_MARK, + DU2_DR3_MARK, LCDOUT3_MARK, CAN_DEBUGOUT6_MARK, + BPFCLK_F_MARK, RDS_CLK_E_MARK, SSI_WS6_MARK, + SCIFB1_RTS_N_MARK, CAN0_TX_D_MARK, DU2_DR4_MARK, + LCDOUT4_MARK, CAN_DEBUGOUT7_MARK, SSI_SDATA6_MARK, + FMIN_D_MARK, RDS_DATA_C_MARK, DU2_DR5_MARK, LCDOUT5_MARK, + CAN_DEBUGOUT8_MARK, SSI_SCK78_MARK, STP_IVCXO27_1_MARK, + SCK1_MARK, SCIFA1_SCK_MARK, DU2_DR6_MARK, LCDOUT6_MARK, + CAN_DEBUGOUT9_MARK, SSI_WS78_MARK, STP_ISCLK_1_MARK, + SCIFB2_SCK_MARK, SCIFA2_CTS_N_MARK, DU2_DR7_MARK, + LCDOUT7_MARK, CAN_DEBUGOUT10_MARK, SSI_SDATA7_MARK, + STP_ISD_1_MARK, SCIFB2_RXD_MARK, SCIFA2_RTS_N_MARK, + TCLK2_MARK, QSTVA_QVS_MARK, CAN_DEBUGOUT11_MARK, + BPFCLK_E_MARK, RDS_CLK_D_MARK, SSI_SDATA7_B_MARK, + FMIN_G_MARK, RDS_DATA_F_MARK, SSI_SDATA8_MARK, + STP_ISEN_1_MARK, SCIFB2_TXD_MARK, CAN0_TX_C_MARK, + CAN_DEBUGOUT12_MARK, SSI_SDATA8_B_MARK, SSI_SDATA9_MARK, + STP_ISSYNC_1_MARK, SCIFB2_CTS_N_MARK, SSI_WS1_MARK, + SSI_SDATA5_C_MARK, CAN_DEBUGOUT13_MARK, AUDIO_CLKA_MARK, + SCIFB2_RTS_N_MARK, CAN_DEBUGOUT14_MARK, + + AUDIO_CLKB_MARK, SCIF_CLK_MARK, CAN0_RX_D_MARK, + DVC_MUTE_MARK, CAN0_RX_C_MARK, CAN_DEBUGOUT15_MARK, + REMOCON_MARK, SCIFA0_SCK_MARK, HSCK1_MARK, SCK0_MARK, + MSIOF3_SS2_MARK, DU2_DG2_MARK, LCDOUT10_MARK, SDA1_C_MARK, + SDA1_CIS_C_MARK, SCIFA0_RXD_MARK, HRX1_MARK, RX0_MARK, + DU2_DR0_MARK, LCDOUT0_MARK, SCIFA0_TXD_MARK, HTX1_MARK, + TX0_MARK, DU2_DR1_MARK, LCDOUT1_MARK, SCIFA0_CTS_N_MARK, + HCTS1_N_MARK, CTS0_N_MARK, MSIOF3_SYNC_MARK, DU2_DG3_MARK, + LCDOUT11_MARK, PWM0_B_MARK, SCL1_C_MARK, SCL1_CIS_C_MARK, + SCIFA0_RTS_N_MARK, HRTS1_N_MARK, RTS0_N_TANS_MARK, + MSIOF3_SS1_MARK, DU2_DG0_MARK, LCDOUT8_MARK, PWM1_B_MARK, + SCIFA1_RXD_MARK, AD_DI_MARK, RX1_MARK, + DU2_EXODDF_DU2_ODDF_DISP_CDE_MARK, QCPV_QDE_MARK, + SCIFA1_TXD_MARK, AD_DO_MARK, TX1_MARK, DU2_DG1_MARK, + LCDOUT9_MARK, SCIFA1_CTS_N_MARK, AD_CLK_MARK, + CTS1_N_MARK, MSIOF3_RXD_MARK, DU0_DOTCLKOUT_MARK, QCLK_MARK, + SCIFA1_RTS_N_MARK, AD_NCS_N_MARK, RTS1_N_TANS_MARK, + MSIOF3_TXD_MARK, DU1_DOTCLKOUT_MARK, QSTVB_QVE_MARK, + HRTS0_N_C_MARK, + + SCIFA2_SCK_MARK, FMCLK_MARK, MSIOF3_SCK_MARK, DU2_DG7_MARK, + LCDOUT15_MARK, SCIF_CLK_B_MARK, SCIFA2_RXD_MARK, FMIN_MARK, + DU2_DB0_MARK, LCDOUT16_MARK, SCL2_MARK, SCL2_CIS_MARK, + SCIFA2_TXD_MARK, BPFCLK_MARK, DU2_DB1_MARK, LCDOUT17_MARK, + SDA2_MARK, SDA2_CIS_MARK, HSCK0_MARK, TS_SDEN0_MARK, + DU2_DG4_MARK, LCDOUT12_MARK, HCTS0_N_C_MARK, HRX0_MARK, + DU2_DB2_MARK, LCDOUT18_MARK, HTX0_MARK, DU2_DB3_MARK, + LCDOUT19_MARK, HCTS0_N_MARK, SSI_SCK9_MARK, DU2_DB4_MARK, + LCDOUT20_MARK, HRTS0_N_MARK, SSI_WS9_MARK, DU2_DB5_MARK, + LCDOUT21_MARK, MSIOF0_SCK_MARK, TS_SDAT0_MARK, ADICLK_MARK, + DU2_DB6_MARK, LCDOUT22_MARK, MSIOF0_SYNC_MARK, TS_SCK0_MARK, + SSI_SCK2_MARK, ADIDATA_MARK, DU2_DB7_MARK, LCDOUT23_MARK, + SCIFA2_RXD_B_MARK, MSIOF0_SS1_MARK, ADICHS0_MARK, + DU2_DG5_MARK, LCDOUT13_MARK, MSIOF0_TXD_MARK, ADICHS1_MARK, + DU2_DG6_MARK, LCDOUT14_MARK, + + MSIOF0_SS2_MARK, AUDIO_CLKOUT_MARK, ADICHS2_MARK, + DU2_DISP_MARK, QPOLA_MARK, HTX0_C_MARK, SCIFA2_TXD_B_MARK, + MSIOF0_RXD_MARK, TS_SPSYNC0_MARK, SSI_WS2_MARK, + ADICS_SAMP_MARK, DU2_CDE_MARK, QPOLB_MARK, HRX0_C_MARK, + USB1_PWEN_MARK, AUDIO_CLKOUT_D_MARK, USB1_OVC_MARK, + TCLK1_B_MARK, + PINMUX_MARK_END, +}; + +static const pinmux_enum_t pinmux_data[] = { + PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */ + + PINMUX_DATA(VI1_DATA7_VI1_B7_MARK, FN_VI1_DATA7_VI1_B7), + PINMUX_DATA(USB0_PWEN_MARK, FN_USB0_PWEN), + PINMUX_DATA(USB0_OVC_VBUS_MARK, FN_USB0_OVC_VBUS), + PINMUX_DATA(USB2_PWEN_MARK, FN_USB2_PWEN), + PINMUX_DATA(USB2_OVC_MARK, FN_USB2_OVC), + PINMUX_DATA(AVS1_MARK, FN_AVS1), + PINMUX_DATA(AVS2_MARK, FN_AVS2), + PINMUX_DATA(DU_DOTCLKIN0_MARK, FN_DU_DOTCLKIN0), + PINMUX_DATA(DU_DOTCLKIN2_MARK, FN_DU_DOTCLKIN2), + + PINMUX_IPSR_DATA(IP0_2_0, D0), + PINMUX_IPSR_MODSEL_DATA(IP0_2_0, MSIOF3_SCK_B, SEL_SOF3_1), + PINMUX_IPSR_MODSEL_DATA(IP0_2_0, VI3_DATA0, SEL_VI3_0), + PINMUX_IPSR_MODSEL_DATA(IP0_2_0, VI0_G4, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_2_0, VI0_G4_B, SEL_VI0_1), + PINMUX_IPSR_DATA(IP0_5_3, D1), + PINMUX_IPSR_MODSEL_DATA(IP0_5_3, MSIOF3_SYNC_B, SEL_SOF3_1), + PINMUX_IPSR_MODSEL_DATA(IP0_5_3, VI3_DATA1, SEL_VI3_0), + PINMUX_IPSR_MODSEL_DATA(IP0_5_3, VI0_G5, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_5_3, VI0_G5_B, SEL_VI0_1), + PINMUX_IPSR_DATA(IP0_8_6, D2), + PINMUX_IPSR_MODSEL_DATA(IP0_8_6, MSIOF3_RXD_B, SEL_SOF3_1), + PINMUX_IPSR_MODSEL_DATA(IP0_8_6, VI3_DATA2, SEL_VI3_0), + PINMUX_IPSR_MODSEL_DATA(IP0_8_6, VI0_G6, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_8_6, VI0_G6_B, SEL_VI0_1), + PINMUX_IPSR_DATA(IP0_11_9, D3), + PINMUX_IPSR_MODSEL_DATA(IP0_11_9, MSIOF3_TXD_B, SEL_SOF3_1), + PINMUX_IPSR_MODSEL_DATA(IP0_11_9, VI3_DATA3, SEL_VI3_0), + PINMUX_IPSR_MODSEL_DATA(IP0_11_9, VI0_G7, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_11_9, VI0_G7_B, SEL_VI0_1), + PINMUX_IPSR_DATA(IP0_15_12, D4), + PINMUX_IPSR_MODSEL_DATA(IP0_15_12, SCIFB1_RXD_F, SEL_SCIFB1_5), + PINMUX_IPSR_MODSEL_DATA(IP0_15_12, SCIFB0_RXD_C, SEL_SCIFB_2), + PINMUX_IPSR_MODSEL_DATA(IP0_15_12, VI3_DATA4, SEL_VI3_0), + PINMUX_IPSR_MODSEL_DATA(IP0_15_12, VI0_R0, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_15_12, VI0_R0_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP0_15_12, RX0_B, SEL_SCIF0_1), + PINMUX_IPSR_DATA(IP0_19_16, D5), + PINMUX_IPSR_MODSEL_DATA(IP0_19_16, SCIFB1_TXD_F, SEL_SCIFB1_5), + PINMUX_IPSR_MODSEL_DATA(IP0_19_16, SCIFB0_TXD_C, SEL_SCIFB_2), + PINMUX_IPSR_MODSEL_DATA(IP0_19_16, VI3_DATA5, SEL_VI3_0), + PINMUX_IPSR_MODSEL_DATA(IP0_19_16, VI0_R1, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_19_16, VI0_R1_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP0_19_16, TX0_B, SEL_SCIF0_1), + PINMUX_IPSR_DATA(IP0_22_20, D6), + PINMUX_IPSR_MODSEL_DATA(IP0_22_20, SCL2_C, SEL_IIC2_2), + PINMUX_IPSR_MODSEL_DATA(IP0_22_20, VI3_DATA6, SEL_VI3_0), + PINMUX_IPSR_MODSEL_DATA(IP0_22_20, VI0_R2, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_22_20, VI0_R2_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP0_22_20, SCL2_CIS_C, SEL_I2C2_2), + PINMUX_IPSR_DATA(IP0_26_23, D7), + PINMUX_IPSR_MODSEL_DATA(IP0_26_23, AD_DI_B, SEL_ADI_1), + PINMUX_IPSR_MODSEL_DATA(IP0_26_23, SDA2_C, SEL_IIC2_2), + PINMUX_IPSR_MODSEL_DATA(IP0_26_23, VI3_DATA7, SEL_VI3_0), + PINMUX_IPSR_MODSEL_DATA(IP0_26_23, VI0_R3, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_26_23, VI0_R3_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP0_26_23, SDA2_CIS_C, SEL_I2C2_2), + PINMUX_IPSR_DATA(IP0_30_27, D8), + PINMUX_IPSR_MODSEL_DATA(IP0_30_27, SCIFA1_SCK_C, SEL_SCIFA1_2), + PINMUX_IPSR_DATA(IP0_30_27, AVB_TXD0), + PINMUX_IPSR_DATA(IP0_30_27, MII_TXD0), + PINMUX_IPSR_MODSEL_DATA(IP0_30_27, VI0_G0, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_30_27, VI0_G0_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP0_30_27, VI2_DATA0_VI2_B0, SEL_VI2_0), + + PINMUX_IPSR_DATA(IP1_3_0, D9), + PINMUX_IPSR_MODSEL_DATA(IP1_3_0, SCIFA1_RXD_C, SEL_SCIFA1_2), + PINMUX_IPSR_DATA(IP1_3_0, AVB_TXD1), + PINMUX_IPSR_DATA(IP1_3_0, MII_TXD1), + PINMUX_IPSR_MODSEL_DATA(IP1_3_0, VI0_G1, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP1_3_0, VI0_G1_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP1_3_0, VI2_DATA1_VI2_B1, SEL_VI2_0), + PINMUX_IPSR_DATA(IP1_7_4, D10), + PINMUX_IPSR_MODSEL_DATA(IP1_7_4, SCIFA1_TXD_C, SEL_SCIFA1_2), + PINMUX_IPSR_DATA(IP1_7_4, AVB_TXD2), + PINMUX_IPSR_DATA(IP1_7_4, MII_TXD2), + PINMUX_IPSR_MODSEL_DATA(IP1_7_4, VI0_G2, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP1_7_4, VI0_G2_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP1_7_4, VI2_DATA2_VI2_B2, SEL_VI2_0), + PINMUX_IPSR_DATA(IP1_11_8, D11), + PINMUX_IPSR_MODSEL_DATA(IP1_11_8, SCIFA1_CTS_N_C, SEL_SCIFA1_2), + PINMUX_IPSR_DATA(IP1_11_8, AVB_TXD3), + PINMUX_IPSR_DATA(IP1_11_8, MII_TXD3), + PINMUX_IPSR_MODSEL_DATA(IP1_11_8, VI0_G3, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP1_11_8, VI0_G3_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP1_11_8, VI2_DATA3_VI2_B3, SEL_VI2_0), + PINMUX_IPSR_DATA(IP1_14_12, D12), + PINMUX_IPSR_MODSEL_DATA(IP1_14_12, SCIFA1_RTS_N_C, SEL_SCIFA1_2), + PINMUX_IPSR_DATA(IP1_14_12, AVB_TXD4), + PINMUX_IPSR_MODSEL_DATA(IP1_14_12, VI0_HSYNC_N, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP1_14_12, VI0_HSYNC_N_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP1_14_12, VI2_DATA4_VI2_B4, SEL_VI2_0), + PINMUX_IPSR_DATA(IP1_17_15, D13), + PINMUX_IPSR_MODSEL_DATA(IP1_17_15, AVB_TXD5, SEL_SCIFA1_2), + PINMUX_IPSR_MODSEL_DATA(IP1_17_15, VI0_VSYNC_N, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP1_17_15, VI0_VSYNC_N_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP1_17_15, VI2_DATA5_VI2_B5, SEL_VI2_0), + PINMUX_IPSR_DATA(IP1_21_18, D14), + PINMUX_IPSR_MODSEL_DATA(IP1_21_18, SCIFB1_RXD_C, SEL_SCIFB1_2), + PINMUX_IPSR_DATA(IP1_21_18, AVB_TXD6), + PINMUX_IPSR_MODSEL_DATA(IP1_21_18, RX1_B, SEL_SCIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP1_21_18, VI0_CLKENB, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP1_21_18, VI0_CLKENB_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP1_21_18, VI2_DATA6_VI2_B6, SEL_VI2_0), + PINMUX_IPSR_DATA(IP1_25_22, D15), + PINMUX_IPSR_MODSEL_DATA(IP1_25_22, SCIFB1_TXD_C, SEL_SCIFB1_2), + PINMUX_IPSR_DATA(IP1_25_22, AVB_TXD7), + PINMUX_IPSR_MODSEL_DATA(IP1_25_22, TX1_B, SEL_SCIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP1_25_22, VI0_FIELD, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP1_25_22, VI0_FIELD_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP1_25_22, VI2_DATA7_VI2_B7, SEL_VI2_0), + PINMUX_IPSR_DATA(IP1_27_26, A0), + PINMUX_IPSR_DATA(IP1_27_26, PWM3), + PINMUX_IPSR_DATA(IP1_29_28, A1), + PINMUX_IPSR_DATA(IP1_29_28, PWM4), + + PINMUX_IPSR_DATA(IP2_2_0, A2), + PINMUX_IPSR_DATA(IP2_2_0, PWM5), + PINMUX_IPSR_MODSEL_DATA(IP2_2_0, MSIOF1_SS1_B, SEL_SOF1_1), + PINMUX_IPSR_DATA(IP2_5_3, A3), + PINMUX_IPSR_DATA(IP2_5_3, PWM6), + PINMUX_IPSR_MODSEL_DATA(IP2_5_3, MSIOF1_SS2_B, SEL_SOF1_1), + PINMUX_IPSR_DATA(IP2_8_6, A4), + PINMUX_IPSR_MODSEL_DATA(IP2_8_6, MSIOF1_TXD_B, SEL_SOF1_1), + PINMUX_IPSR_DATA(IP2_8_6, TPU0TO0), + PINMUX_IPSR_DATA(IP2_11_9, A5), + PINMUX_IPSR_MODSEL_DATA(IP2_11_9, SCIFA1_TXD_B, SEL_SCIFA1_1), + PINMUX_IPSR_DATA(IP2_11_9, TPU0TO1), + PINMUX_IPSR_DATA(IP2_14_12, A6), + PINMUX_IPSR_MODSEL_DATA(IP2_14_12, SCIFA1_RTS_N_B, SEL_SCIFA1_1), + PINMUX_IPSR_DATA(IP2_14_12, TPU0TO2), + PINMUX_IPSR_DATA(IP2_17_15, A7), + PINMUX_IPSR_MODSEL_DATA(IP2_17_15, SCIFA1_SCK_B, SEL_SCIFA1_1), + PINMUX_IPSR_DATA(IP2_17_15, AUDIO_CLKOUT_B), + PINMUX_IPSR_DATA(IP2_17_15, TPU0TO3), + PINMUX_IPSR_DATA(IP2_21_18, A8), + PINMUX_IPSR_MODSEL_DATA(IP2_21_18, SCIFA1_RXD_B, SEL_SCIFA1_1), + PINMUX_IPSR_MODSEL_DATA(IP2_21_18, SSI_SCK5_B, SEL_SSI5_1), + PINMUX_IPSR_MODSEL_DATA(IP2_21_18, VI0_R4, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP2_21_18, VI0_R4_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP2_21_18, SCIFB2_RXD_C, SEL_SCIFB2_2), + PINMUX_IPSR_MODSEL_DATA(IP2_21_18, VI2_DATA0_VI2_B0_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP2_25_22, A9), + PINMUX_IPSR_MODSEL_DATA(IP2_25_22, SCIFA1_CTS_N_B, SEL_SCIFA1_1), + PINMUX_IPSR_MODSEL_DATA(IP2_25_22, SSI_WS5_B, SEL_SSI5_1), + PINMUX_IPSR_MODSEL_DATA(IP2_25_22, VI0_R5, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP2_25_22, VI0_R5_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP2_25_22, SCIFB2_TXD_C, SEL_SCIFB2_2), + PINMUX_IPSR_MODSEL_DATA(IP2_25_22, VI2_DATA1_VI2_B1_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP2_28_26, A10), + PINMUX_IPSR_MODSEL_DATA(IP2_28_26, SSI_SDATA5_B, SEL_SSI5_1), + PINMUX_IPSR_DATA(IP2_28_26, MSIOF2_SYNC), + PINMUX_IPSR_MODSEL_DATA(IP2_28_26, VI0_R6, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP2_28_26, VI0_R6_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP2_28_26, VI2_DATA2_VI2_B2_B, SEL_VI2_1), + + PINMUX_IPSR_DATA(IP3_3_0, A11), + PINMUX_IPSR_MODSEL_DATA(IP3_3_0, SCIFB2_CTS_N_B, SEL_SCIFB2_1), + PINMUX_IPSR_DATA(IP3_3_0, MSIOF2_SCK), + PINMUX_IPSR_MODSEL_DATA(IP3_3_0, VI1_R0, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP3_3_0, VI1_R0_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP3_3_0, VI2_G0), + PINMUX_IPSR_DATA(IP3_3_0, VI2_DATA3_VI2_B3_B), + PINMUX_IPSR_DATA(IP3_7_4, A12), + PINMUX_IPSR_MODSEL_DATA(IP3_7_4, SCIFB2_RXD_B, SEL_SCIFB2_1), + PINMUX_IPSR_DATA(IP3_7_4, MSIOF2_TXD), + PINMUX_IPSR_MODSEL_DATA(IP3_7_4, VI1_R1, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP3_7_4, VI1_R1_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP3_7_4, VI2_G1), + PINMUX_IPSR_DATA(IP3_7_4, VI2_DATA4_VI2_B4_B), + PINMUX_IPSR_DATA(IP3_11_8, A13), + PINMUX_IPSR_MODSEL_DATA(IP3_11_8, SCIFB2_RTS_N_B, SEL_SCIFB2_1), + PINMUX_IPSR_DATA(IP3_11_8, EX_WAIT2), + PINMUX_IPSR_DATA(IP3_11_8, MSIOF2_RXD), + PINMUX_IPSR_MODSEL_DATA(IP3_11_8, VI1_R2, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP3_11_8, VI1_R2_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP3_11_8, VI2_G2), + PINMUX_IPSR_MODSEL_DATA(IP3_11_8, VI2_DATA5_VI2_B5_B, SEL_VI2_0), + PINMUX_IPSR_DATA(IP3_14_12, A14), + PINMUX_IPSR_MODSEL_DATA(IP3_14_12, SCIFB2_TXD_B, SEL_SCIFB2_1), + PINMUX_IPSR_DATA(IP3_14_12, ATACS11_N), + PINMUX_IPSR_DATA(IP3_14_12, MSIOF2_SS1), + PINMUX_IPSR_DATA(IP3_17_15, A15), + PINMUX_IPSR_MODSEL_DATA(IP3_17_15, SCIFB2_SCK_B, SEL_SCIFB2_1), + PINMUX_IPSR_DATA(IP3_17_15, ATARD1_N), + PINMUX_IPSR_DATA(IP3_17_15, MSIOF2_SS2), + PINMUX_IPSR_DATA(IP3_19_18, A16), + PINMUX_IPSR_DATA(IP3_19_18, ATAWR1_N), + PINMUX_IPSR_DATA(IP3_22_20, A17), + PINMUX_IPSR_MODSEL_DATA(IP3_22_20, AD_DO_B, SEL_ADI_1), + PINMUX_IPSR_DATA(IP3_22_20, ATADIR1_N), + PINMUX_IPSR_DATA(IP3_25_23, A18), + PINMUX_IPSR_MODSEL_DATA(IP3_25_23, AD_CLK_B, SEL_ADI_1), + PINMUX_IPSR_DATA(IP3_25_23, ATAG1_N), + PINMUX_IPSR_DATA(IP3_28_26, A19), + PINMUX_IPSR_MODSEL_DATA(IP3_28_26, AD_NCS_N_B, SEL_ADI_1), + PINMUX_IPSR_DATA(IP3_28_26, ATACS01_N), + PINMUX_IPSR_MODSEL_DATA(IP3_28_26, EX_WAIT0_B, SEL_LBS_1), + PINMUX_IPSR_DATA(IP3_31_29, A20), + PINMUX_IPSR_DATA(IP3_31_29, SPCLK), + PINMUX_IPSR_MODSEL_DATA(IP3_31_29, VI1_R3, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP3_31_29, VI1_R3_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP3_31_29, VI2_G4), + + PINMUX_IPSR_DATA(IP4_2_0, A21), + PINMUX_IPSR_DATA(IP4_2_0, MOSI_IO0), + PINMUX_IPSR_MODSEL_DATA(IP4_2_0, VI1_R4, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP4_2_0, VI1_R4_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP4_2_0, VI2_G5), + PINMUX_IPSR_DATA(IP4_5_3, A22), + PINMUX_IPSR_DATA(IP4_5_3, MISO_IO1), + PINMUX_IPSR_MODSEL_DATA(IP4_5_3, VI1_R5, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP4_5_3, VI1_R5_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP4_5_3, VI2_G6), + PINMUX_IPSR_DATA(IP4_8_6, A23), + PINMUX_IPSR_DATA(IP4_8_6, IO2), + PINMUX_IPSR_MODSEL_DATA(IP4_8_6, VI1_G7, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP4_8_6, VI1_G7_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP4_8_6, VI2_G7), + PINMUX_IPSR_DATA(IP4_11_9, A24), + PINMUX_IPSR_DATA(IP4_11_9, IO3), + PINMUX_IPSR_MODSEL_DATA(IP4_11_9, VI1_R7, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP4_11_9, VI1_R7_B, SEL_VI1_1), + PINMUX_IPSR_MODSEL_DATA(IP4_11_9, VI2_CLKENB, SEL_VI2_0), + PINMUX_IPSR_MODSEL_DATA(IP4_11_9, VI2_CLKENB_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP4_14_12, A25), + PINMUX_IPSR_DATA(IP4_14_12, SSL), + PINMUX_IPSR_MODSEL_DATA(IP4_14_12, VI1_G6, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP4_14_12, VI1_G6_B, SEL_VI1_1), + PINMUX_IPSR_MODSEL_DATA(IP4_14_12, VI2_FIELD, SEL_VI2_0), + PINMUX_IPSR_MODSEL_DATA(IP4_14_12, VI2_FIELD_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP4_17_15, CS0_N), + PINMUX_IPSR_MODSEL_DATA(IP4_17_15, VI1_R6, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP4_17_15, VI1_R6_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP4_17_15, VI2_G3), + PINMUX_IPSR_MODSEL_DATA(IP4_17_15, MSIOF0_SS2_B, SEL_SOF0_1), + PINMUX_IPSR_DATA(IP4_20_18, CS1_N_A26), + PINMUX_IPSR_DATA(IP4_20_18, SPEEDIN), + PINMUX_IPSR_MODSEL_DATA(IP4_20_18, VI0_R7, SEL_VI0_0), + PINMUX_IPSR_MODSEL_DATA(IP4_20_18, VI0_R7_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP4_20_18, VI2_CLK, SEL_VI2_0), + PINMUX_IPSR_MODSEL_DATA(IP4_20_18, VI2_CLK_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP4_23_21, EX_CS0_N), + PINMUX_IPSR_MODSEL_DATA(IP4_23_21, HRX1_B, SEL_HSCIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP4_23_21, VI1_G5, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP4_23_21, VI1_G5_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP4_23_21, VI2_R0), + PINMUX_IPSR_MODSEL_DATA(IP4_23_21, HTX0_B, SEL_HSCIF0_1), + PINMUX_IPSR_MODSEL_DATA(IP4_23_21, MSIOF0_SS1_B, SEL_SOF0_1), + PINMUX_IPSR_DATA(IP4_26_24, EX_CS1_N), + PINMUX_IPSR_DATA(IP4_26_24, GPS_CLK), + PINMUX_IPSR_MODSEL_DATA(IP4_26_24, HCTS1_N_B, SEL_HSCIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP4_26_24, VI1_FIELD, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP4_26_24, VI1_FIELD_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP4_26_24, VI2_R1), + PINMUX_IPSR_DATA(IP4_29_27, EX_CS2_N), + PINMUX_IPSR_DATA(IP4_29_27, GPS_SIGN), + PINMUX_IPSR_MODSEL_DATA(IP4_29_27, HRTS1_N_B, SEL_HSCIF1_1), + PINMUX_IPSR_DATA(IP4_29_27, VI3_CLKENB), + PINMUX_IPSR_MODSEL_DATA(IP4_29_27, VI1_G0, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP4_29_27, VI1_G0_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP4_29_27, VI2_R2), + + PINMUX_IPSR_DATA(IP5_2_0, EX_CS3_N), + PINMUX_IPSR_DATA(IP5_2_0, GPS_MAG), + PINMUX_IPSR_DATA(IP5_2_0, VI3_FIELD), + PINMUX_IPSR_MODSEL_DATA(IP5_2_0, VI1_G1, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP5_2_0, VI1_G1_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP5_2_0, VI2_R3), + PINMUX_IPSR_MODSEL_DATA(IP5_5_3, EX_CS4_N, SEL_I2C1_0), + PINMUX_IPSR_MODSEL_DATA(IP5_5_3, MSIOF1_SCK_B, SEL_SOF1_1), + PINMUX_IPSR_DATA(IP5_5_3, VI3_HSYNC_N), + PINMUX_IPSR_MODSEL_DATA(IP5_5_3, VI2_HSYNC_N, SEL_VI2_0), + PINMUX_IPSR_MODSEL_DATA(IP5_5_3, SCL1, SEL_IIC1_0), + PINMUX_IPSR_MODSEL_DATA(IP5_5_3, VI2_HSYNC_N_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP5_5_3, INTC_EN0_N), + PINMUX_IPSR_MODSEL_DATA(IP5_5_3, SCL1_CIS, SEL_I2C1_0), + PINMUX_IPSR_DATA(IP5_9_6, EX_CS5_N), + PINMUX_IPSR_MODSEL_DATA(IP5_9_6, CAN0_RX, SEL_CAN0_0), + PINMUX_IPSR_MODSEL_DATA(IP5_9_6, MSIOF1_RXD_B, SEL_SOF1_1), + PINMUX_IPSR_DATA(IP5_9_6, VI3_VSYNC_N), + PINMUX_IPSR_MODSEL_DATA(IP5_9_6, VI1_G2, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP5_9_6, VI1_G2_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP5_9_6, VI2_R4), + PINMUX_IPSR_MODSEL_DATA(IP5_9_6, SDA1, SEL_IIC1_0), + PINMUX_IPSR_DATA(IP5_9_6, INTC_EN1_N), + PINMUX_IPSR_MODSEL_DATA(IP5_9_6, SDA1_CIS, SEL_I2C1_0), + PINMUX_IPSR_DATA(IP5_12_10, BS_N), + PINMUX_IPSR_MODSEL_DATA(IP5_12_10, IETX, SEL_IEB_0), + PINMUX_IPSR_MODSEL_DATA(IP5_12_10, HTX1_B, SEL_HSCIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP5_12_10, CAN1_TX, SEL_CAN1_0), + PINMUX_IPSR_DATA(IP5_12_10, DRACK0), + PINMUX_IPSR_MODSEL_DATA(IP5_12_10, IETX_C, SEL_IEB_2), + PINMUX_IPSR_DATA(IP5_14_13, RD_N), + PINMUX_IPSR_MODSEL_DATA(IP5_14_13, CAN0_TX, SEL_CAN0_0), + PINMUX_IPSR_MODSEL_DATA(IP5_14_13, SCIFA0_SCK_B, SEL_SCFA_1), + PINMUX_IPSR_DATA(IP5_17_15, RD_WR_N), + PINMUX_IPSR_MODSEL_DATA(IP5_17_15, VI1_G3, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP5_17_15, VI1_G3_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP5_17_15, VI2_R5), + PINMUX_IPSR_MODSEL_DATA(IP5_17_15, SCIFA0_RXD_B, SEL_SCFA_1), + PINMUX_IPSR_DATA(IP5_17_15, INTC_IRQ4_N), + PINMUX_IPSR_DATA(IP5_20_18, WE0_N), + PINMUX_IPSR_MODSEL_DATA(IP5_20_18, IECLK, SEL_IEB_0), + PINMUX_IPSR_MODSEL_DATA(IP5_20_18, CAN_CLK, SEL_CANCLK_0), + PINMUX_IPSR_MODSEL_DATA(IP5_20_18, VI2_VSYNC_N, SEL_VI2_0), + PINMUX_IPSR_MODSEL_DATA(IP5_20_18, SCIFA0_TXD_B, SEL_SCFA_1), + PINMUX_IPSR_MODSEL_DATA(IP5_20_18, VI2_VSYNC_N_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP5_23_21, WE1_N), + PINMUX_IPSR_MODSEL_DATA(IP5_23_21, IERX, SEL_IEB_0), + PINMUX_IPSR_MODSEL_DATA(IP5_23_21, CAN1_RX, SEL_CAN1_0), + PINMUX_IPSR_MODSEL_DATA(IP5_23_21, VI1_G4, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP5_23_21, VI1_G4_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP5_23_21, VI2_R6), + PINMUX_IPSR_MODSEL_DATA(IP5_23_21, SCIFA0_CTS_N_B, SEL_SCFA_1), + PINMUX_IPSR_MODSEL_DATA(IP5_23_21, IERX_C, SEL_IEB_2), + PINMUX_IPSR_DATA(IP5_26_24, EX_WAIT0), + PINMUX_IPSR_DATA(IP5_26_24, IRQ3), + PINMUX_IPSR_DATA(IP5_26_24, INTC_IRQ3_N), + PINMUX_IPSR_MODSEL_DATA(IP5_26_24, VI3_CLK, SEL_VI3_0), + PINMUX_IPSR_MODSEL_DATA(IP5_26_24, SCIFA0_RTS_N_B, SEL_SCFA_1), + PINMUX_IPSR_MODSEL_DATA(IP5_26_24, HRX0_B, SEL_HSCIF0_1), + PINMUX_IPSR_MODSEL_DATA(IP5_26_24, MSIOF0_SCK_B, SEL_SOF0_1), + PINMUX_IPSR_DATA(IP5_29_27, DREQ0_N), + PINMUX_IPSR_MODSEL_DATA(IP5_29_27, VI1_HSYNC_N, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP5_29_27, VI1_HSYNC_N_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP5_29_27, VI2_R7), + PINMUX_IPSR_MODSEL_DATA(IP5_29_27, SSI_SCK78_C, SEL_SSI7_2), + PINMUX_IPSR_MODSEL_DATA(IP5_29_27, SSI_WS78_B, SEL_SSI7_1), + + PINMUX_IPSR_DATA(IP6_2_0, DACK0), + PINMUX_IPSR_DATA(IP6_2_0, IRQ0), + PINMUX_IPSR_DATA(IP6_2_0, INTC_IRQ0_N), + PINMUX_IPSR_MODSEL_DATA(IP6_2_0, SSI_SCK6_B, SEL_SSI6_1), + PINMUX_IPSR_MODSEL_DATA(IP6_2_0, VI1_VSYNC_N, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP6_2_0, VI1_VSYNC_N_B, SEL_VI1_1), + PINMUX_IPSR_MODSEL_DATA(IP6_2_0, SSI_WS78_C, SEL_SSI7_2), + PINMUX_IPSR_DATA(IP6_5_3, DREQ1_N), + PINMUX_IPSR_MODSEL_DATA(IP6_5_3, VI1_CLKENB, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP6_5_3, VI1_CLKENB_B, SEL_VI1_1), + PINMUX_IPSR_MODSEL_DATA(IP6_5_3, SSI_SDATA7_C, SEL_SSI7_2), + PINMUX_IPSR_MODSEL_DATA(IP6_5_3, SSI_SCK78_B, SEL_SSI7_1), + PINMUX_IPSR_DATA(IP6_8_6, DACK1), + PINMUX_IPSR_DATA(IP6_8_6, IRQ1), + PINMUX_IPSR_DATA(IP6_8_6, INTC_IRQ1_N), + PINMUX_IPSR_MODSEL_DATA(IP6_8_6, SSI_WS6_B, SEL_SSI6_1), + PINMUX_IPSR_MODSEL_DATA(IP6_8_6, SSI_SDATA8_C, SEL_SSI8_2), + PINMUX_IPSR_DATA(IP6_10_9, DREQ2_N), + PINMUX_IPSR_MODSEL_DATA(IP6_10_9, HSCK1_B, SEL_HSCIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP6_10_9, HCTS0_N_B, SEL_HSCIF0_1), + PINMUX_IPSR_MODSEL_DATA(IP6_10_9, MSIOF0_TXD_B, SEL_SOF0_1), + PINMUX_IPSR_DATA(IP6_13_11, DACK2), + PINMUX_IPSR_DATA(IP6_13_11, IRQ2), + PINMUX_IPSR_DATA(IP6_13_11, INTC_IRQ2_N), + PINMUX_IPSR_MODSEL_DATA(IP6_13_11, SSI_SDATA6_B, SEL_SSI6_1), + PINMUX_IPSR_MODSEL_DATA(IP6_13_11, HRTS0_N_B, SEL_HSCIF0_1), + PINMUX_IPSR_MODSEL_DATA(IP6_13_11, MSIOF0_RXD_B, SEL_SOF0_1), + PINMUX_IPSR_DATA(IP6_16_14, ETH_CRS_DV), + PINMUX_IPSR_DATA(IP6_16_14, RMII_CRS_DV), + PINMUX_IPSR_MODSEL_DATA(IP6_16_14, STP_ISCLK_0_B, SEL_SSP_1), + PINMUX_IPSR_MODSEL_DATA(IP6_16_14, TS_SDEN0_D, SEL_TSIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP6_16_14, GLO_Q0_C, SEL_GPS_2), + PINMUX_IPSR_MODSEL_DATA(IP6_16_14, SCL2_E, SEL_IIC2_4), + PINMUX_IPSR_MODSEL_DATA(IP6_16_14, SCL2_CIS_E, SEL_I2C2_4), + PINMUX_IPSR_DATA(IP6_19_17, ETH_RX_ER), + PINMUX_IPSR_DATA(IP6_19_17, RMII_RX_ER), + PINMUX_IPSR_MODSEL_DATA(IP6_19_17, STP_ISD_0_B, SEL_SSP_1), + PINMUX_IPSR_MODSEL_DATA(IP6_19_17, TS_SPSYNC0_D, SEL_TSIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP6_19_17, GLO_Q1_C, SEL_GPS_2), + PINMUX_IPSR_MODSEL_DATA(IP6_19_17, SDA2_E, SEL_IIC2_4), + PINMUX_IPSR_MODSEL_DATA(IP6_19_17, SDA2_CIS_E, SEL_I2C2_4), + PINMUX_IPSR_DATA(IP6_22_20, ETH_RXD0), + PINMUX_IPSR_DATA(IP6_22_20, RMII_RXD0), + PINMUX_IPSR_MODSEL_DATA(IP6_22_20, STP_ISEN_0_B, SEL_SSP_1), + PINMUX_IPSR_MODSEL_DATA(IP6_22_20, TS_SDAT0_D, SEL_TSIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP6_22_20, GLO_I0_C, SEL_GPS_2), + PINMUX_IPSR_MODSEL_DATA(IP6_22_20, SCIFB1_SCK_G, SEL_SCIFB1_6), + PINMUX_IPSR_MODSEL_DATA(IP6_22_20, SCK1_E, SEL_SCIF1_4), + PINMUX_IPSR_DATA(IP6_25_23, ETH_RXD1), + PINMUX_IPSR_DATA(IP6_25_23, RMII_RXD1), + PINMUX_IPSR_MODSEL_DATA(IP6_25_23, HRX0_E, SEL_HSCIF0_4), + PINMUX_IPSR_MODSEL_DATA(IP6_25_23, STP_ISSYNC_0_B, SEL_SSP_1), + PINMUX_IPSR_MODSEL_DATA(IP6_25_23, TS_SCK0_D, SEL_TSIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP6_25_23, GLO_I1_C, SEL_GPS_2), + PINMUX_IPSR_MODSEL_DATA(IP6_25_23, SCIFB1_RXD_G, SEL_SCIFB1_6), + PINMUX_IPSR_MODSEL_DATA(IP6_25_23, RX1_E, SEL_SCIF1_4), + PINMUX_IPSR_DATA(IP6_28_26, ETH_LINK), + PINMUX_IPSR_DATA(IP6_28_26, RMII_LINK), + PINMUX_IPSR_MODSEL_DATA(IP6_28_26, HTX0_E, SEL_HSCIF0_4), + PINMUX_IPSR_MODSEL_DATA(IP6_28_26, STP_IVCXO27_0_B, SEL_SSP_1), + PINMUX_IPSR_MODSEL_DATA(IP6_28_26, SCIFB1_TXD_G, SEL_SCIFB1_6), + PINMUX_IPSR_MODSEL_DATA(IP6_28_26, TX1_E, SEL_SCIF1_4), + PINMUX_IPSR_DATA(IP6_31_29, ETH_REF_CLK), + PINMUX_IPSR_DATA(IP6_31_29, RMII_REF_CLK), + PINMUX_IPSR_MODSEL_DATA(IP6_31_29, HCTS0_N_E, SEL_HSCIF0_4), + PINMUX_IPSR_MODSEL_DATA(IP6_31_29, STP_IVCXO27_1_B, SEL_SSP_1), + PINMUX_IPSR_MODSEL_DATA(IP6_31_29, HRX0_F, SEL_HSCIF0_5), + + PINMUX_IPSR_DATA(IP7_2_0, ETH_MDIO), + PINMUX_IPSR_DATA(IP7_2_0, RMII_MDIO), + PINMUX_IPSR_MODSEL_DATA(IP7_2_0, HRTS0_N_E, SEL_HSCIF0_4), + PINMUX_IPSR_MODSEL_DATA(IP7_2_0, SIM0_D_C, SEL_SIM_2), + PINMUX_IPSR_MODSEL_DATA(IP7_2_0, HCTS0_N_F, SEL_HSCIF0_5), + PINMUX_IPSR_DATA(IP7_5_3, ETH_TXD1), + PINMUX_IPSR_DATA(IP7_5_3, RMII_TXD1), + PINMUX_IPSR_MODSEL_DATA(IP7_5_3, HTX0_F, SEL_HSCIF0_4), + PINMUX_IPSR_MODSEL_DATA(IP7_5_3, BPFCLK_G, SEL_SIM_2), + PINMUX_IPSR_MODSEL_DATA(IP7_5_3, RDS_CLK_F, SEL_HSCIF0_5), + PINMUX_IPSR_DATA(IP7_7_6, ETH_TX_EN), + PINMUX_IPSR_DATA(IP7_7_6, RMII_TX_EN), + PINMUX_IPSR_MODSEL_DATA(IP7_7_6, SIM0_CLK_C, SEL_SIM_2), + PINMUX_IPSR_MODSEL_DATA(IP7_7_6, HRTS0_N_F, SEL_HSCIF0_5), + PINMUX_IPSR_DATA(IP7_9_8, ETH_MAGIC), + PINMUX_IPSR_DATA(IP7_9_8, RMII_MAGIC), + PINMUX_IPSR_MODSEL_DATA(IP7_9_8, SIM0_RST_C, SEL_SIM_2), + PINMUX_IPSR_DATA(IP7_12_10, ETH_TXD0), + PINMUX_IPSR_DATA(IP7_12_10, RMII_TXD0), + PINMUX_IPSR_MODSEL_DATA(IP7_12_10, STP_ISCLK_1_B, SEL_SSP_1), + PINMUX_IPSR_MODSEL_DATA(IP7_12_10, TS_SDEN1_C, SEL_TSIF1_2), + PINMUX_IPSR_MODSEL_DATA(IP7_12_10, GLO_SCLK_C, SEL_GPS_2), + PINMUX_IPSR_DATA(IP7_15_13, ETH_MDC), + PINMUX_IPSR_DATA(IP7_15_13, RMII_MDC), + PINMUX_IPSR_MODSEL_DATA(IP7_15_13, STP_ISD_1_B, SEL_SSP_1), + PINMUX_IPSR_MODSEL_DATA(IP7_15_13, TS_SPSYNC1_C, SEL_TSIF1_2), + PINMUX_IPSR_MODSEL_DATA(IP7_15_13, GLO_SDATA_C, SEL_GPS_2), + PINMUX_IPSR_DATA(IP7_18_16, PWM0), + PINMUX_IPSR_MODSEL_DATA(IP7_18_16, SCIFA2_SCK_C, SEL_SCIFA2_2), + PINMUX_IPSR_MODSEL_DATA(IP7_18_16, STP_ISEN_1_B, SEL_SSP_1), + PINMUX_IPSR_MODSEL_DATA(IP7_18_16, TS_SDAT1_C, SEL_TSIF1_2), + PINMUX_IPSR_MODSEL_DATA(IP7_18_16, GLO_SS_C, SEL_GPS_2), + PINMUX_IPSR_DATA(IP7_21_19, PWM1), + PINMUX_IPSR_MODSEL_DATA(IP7_21_19, SCIFA2_TXD_C, SEL_SCIFA2_2), + PINMUX_IPSR_MODSEL_DATA(IP7_21_19, STP_ISSYNC_1_B, SEL_SSP_1), + PINMUX_IPSR_MODSEL_DATA(IP7_21_19, TS_SCK1_C, SEL_TSIF1_2), + PINMUX_IPSR_MODSEL_DATA(IP7_21_19, GLO_RFON_C, SEL_GPS_2), + PINMUX_IPSR_DATA(IP7_21_19, PCMOE_N), + PINMUX_IPSR_DATA(IP7_24_22, PWM2), + PINMUX_IPSR_DATA(IP7_24_22, PWMFSW0), + PINMUX_IPSR_MODSEL_DATA(IP7_24_22, SCIFA2_RXD_C, SEL_SCIFA2_2), + PINMUX_IPSR_DATA(IP7_24_22, PCMWE_N), + PINMUX_IPSR_MODSEL_DATA(IP7_24_22, IECLK_C, SEL_IEB_2), + PINMUX_IPSR_DATA(IP7_26_25, DU1_DOTCLKIN), + PINMUX_IPSR_DATA(IP7_26_25, AUDIO_CLKC), + PINMUX_IPSR_DATA(IP7_26_25, AUDIO_CLKOUT_C), + PINMUX_IPSR_MODSEL_DATA(IP7_28_27, VI0_CLK, SEL_VI0_0), + PINMUX_IPSR_DATA(IP7_28_27, ATACS00_N), + PINMUX_IPSR_DATA(IP7_28_27, AVB_RXD1), + PINMUX_IPSR_DATA(IP7_28_27, MII_RXD1), + PINMUX_IPSR_MODSEL_DATA(IP7_30_29, VI0_DATA0_VI0_B0, SEL_VI0_0), + PINMUX_IPSR_DATA(IP7_30_29, ATACS10_N), + PINMUX_IPSR_DATA(IP7_30_29, AVB_RXD2), + PINMUX_IPSR_DATA(IP7_30_29, MII_RXD2), + + PINMUX_IPSR_MODSEL_DATA(IP8_1_0, VI0_DATA1_VI0_B1, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_1_0, ATARD0_N), + PINMUX_IPSR_DATA(IP8_1_0, AVB_RXD3), + PINMUX_IPSR_DATA(IP8_1_0, MII_RXD3), + PINMUX_IPSR_MODSEL_DATA(IP8_3_2, VI0_DATA2_VI0_B2, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_3_2, ATAWR0_N), + PINMUX_IPSR_DATA(IP8_3_2, AVB_RXD4), + PINMUX_IPSR_MODSEL_DATA(IP8_5_4, VI0_DATA3_VI0_B3, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_5_4, ATADIR0_N), + PINMUX_IPSR_DATA(IP8_5_4, AVB_RXD5), + PINMUX_IPSR_MODSEL_DATA(IP8_7_6, VI0_DATA4_VI0_B4, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_7_6, ATAG0_N), + PINMUX_IPSR_DATA(IP8_7_6, AVB_RXD6), + PINMUX_IPSR_MODSEL_DATA(IP8_9_8, VI0_DATA5_VI0_B5, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_9_8, EX_WAIT1), + PINMUX_IPSR_DATA(IP8_9_8, AVB_RXD7), + PINMUX_IPSR_MODSEL_DATA(IP8_11_10, VI0_DATA6_VI0_B6, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_11_10, AVB_RX_ER), + PINMUX_IPSR_DATA(IP8_11_10, MII_RX_ER), + PINMUX_IPSR_MODSEL_DATA(IP8_13_12, VI0_DATA7_VI0_B7, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_13_12, AVB_RX_CLK), + PINMUX_IPSR_DATA(IP8_13_12, MII_RX_CLK), + PINMUX_IPSR_MODSEL_DATA(IP8_15_14, VI1_CLK, SEL_VI1_0), + PINMUX_IPSR_DATA(IP8_15_14, AVB_RX_DV), + PINMUX_IPSR_DATA(IP8_15_14, MII_RX_DV), + PINMUX_IPSR_MODSEL_DATA(IP8_17_16, VI1_DATA0_VI1_B0, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_17_16, SCIFA1_SCK_D, SEL_SCIFA1_3), + PINMUX_IPSR_DATA(IP8_17_16, AVB_CRS), + PINMUX_IPSR_DATA(IP8_17_16, MII_CRS), + PINMUX_IPSR_MODSEL_DATA(IP8_19_18, VI1_DATA1_VI1_B1, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_19_18, SCIFA1_RXD_D, SEL_SCIFA1_3), + PINMUX_IPSR_DATA(IP8_19_18, AVB_MDC), + PINMUX_IPSR_DATA(IP8_19_18, MII_MDC), + PINMUX_IPSR_MODSEL_DATA(IP8_21_20, VI1_DATA2_VI1_B2, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_21_20, SCIFA1_TXD_D, SEL_SCIFA1_3), + PINMUX_IPSR_DATA(IP8_21_20, AVB_MDIO), + PINMUX_IPSR_DATA(IP8_21_20, MII_MDIO), + PINMUX_IPSR_MODSEL_DATA(IP8_23_22, VI1_DATA3_VI1_B3, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_23_22, SCIFA1_CTS_N_D, SEL_SCIFA1_3), + PINMUX_IPSR_DATA(IP8_23_22, AVB_GTX_CLK), + PINMUX_IPSR_MODSEL_DATA(IP8_25_24, VI1_DATA4_VI1_B4, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_25_24, SCIFA1_RTS_N_D, SEL_SCIFA1_3), + PINMUX_IPSR_DATA(IP8_25_24, AVB_MAGIC), + PINMUX_IPSR_DATA(IP8_25_24, MII_MAGIC), + PINMUX_IPSR_MODSEL_DATA(IP8_26, VI1_DATA5_VI1_B5, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_26, AVB_PHY_INT, SEL_SCIFA1_3), + PINMUX_IPSR_MODSEL_DATA(IP8_27, VI1_DATA6_VI1_B6, SEL_VI1_0), + PINMUX_IPSR_DATA(IP8_27, AVB_GTXREFCLK), + PINMUX_IPSR_DATA(IP8_28, SD0_CLK), + PINMUX_IPSR_MODSEL_DATA(IP8_28, VI1_DATA0_VI1_B0_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP8_30_29, SD0_CMD), + PINMUX_IPSR_MODSEL_DATA(IP8_30_29, SCIFB1_SCK_B, SEL_SCIFB1_1), + PINMUX_IPSR_MODSEL_DATA(IP8_30_29, VI1_DATA1_VI1_B1_B, SEL_VI1_1), + + PINMUX_IPSR_DATA(IP9_1_0, SD0_DAT0), + PINMUX_IPSR_MODSEL_DATA(IP9_1_0, SCIFB1_RXD_B, SEL_SCIFB1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_1_0, VI1_DATA2_VI1_B2_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP9_3_2, SD0_DAT1), + PINMUX_IPSR_MODSEL_DATA(IP9_3_2, SCIFB1_TXD_B, SEL_SCIFB1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_3_2, VI1_DATA3_VI1_B3_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP9_5_4, SD0_DAT2), + PINMUX_IPSR_MODSEL_DATA(IP9_5_4, SCIFB1_CTS_N_B, SEL_SCIFB1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_5_4, VI1_DATA4_VI1_B4_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP9_7_6, SD0_DAT3), + PINMUX_IPSR_MODSEL_DATA(IP9_7_6, SCIFB1_RTS_N_B, SEL_SCIFB1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_7_6, VI1_DATA5_VI1_B5_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP9_11_8, SD0_CD), + PINMUX_IPSR_DATA(IP9_11_8, MMC0_D6), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, TS_SDEN0_B, SEL_TSIF0_1), + PINMUX_IPSR_DATA(IP9_11_8, USB0_EXTP), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, GLO_SCLK, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, VI1_DATA6_VI1_B6_B, SEL_VI1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, SCL1_B, SEL_IIC1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, SCL1_CIS_B, SEL_I2C1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, VI2_DATA6_VI2_B6_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP9_15_12, SD0_WP), + PINMUX_IPSR_DATA(IP9_15_12, MMC0_D7), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, TS_SPSYNC0_B, SEL_TSIF0_1), + PINMUX_IPSR_DATA(IP9_15_12, USB0_IDIN), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, GLO_SDATA, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, VI1_DATA7_VI1_B7_B, SEL_VI1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, SDA1_B, SEL_IIC1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, SDA1_CIS_B, SEL_I2C1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, VI2_DATA7_VI2_B7_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP9_17_16, SD1_CLK), + PINMUX_IPSR_DATA(IP9_17_16, AVB_TX_EN), + PINMUX_IPSR_DATA(IP9_17_16, MII_TX_EN), + PINMUX_IPSR_DATA(IP9_19_18, SD1_CMD), + PINMUX_IPSR_DATA(IP9_19_18, AVB_TX_ER), + PINMUX_IPSR_DATA(IP9_19_18, MII_TX_ER), + PINMUX_IPSR_MODSEL_DATA(IP9_19_18, SCIFB0_SCK_B, SEL_SCIFB_1), + PINMUX_IPSR_DATA(IP9_21_20, SD1_DAT0), + PINMUX_IPSR_DATA(IP9_21_20, AVB_TX_CLK), + PINMUX_IPSR_DATA(IP9_21_20, MII_TX_CLK), + PINMUX_IPSR_MODSEL_DATA(IP9_21_20, SCIFB0_RXD_B, SEL_SCIFB_1), + PINMUX_IPSR_DATA(IP9_23_22, SD1_DAT1), + PINMUX_IPSR_DATA(IP9_23_22, AVB_LINK), + PINMUX_IPSR_DATA(IP9_23_22, MII_LINK), + PINMUX_IPSR_MODSEL_DATA(IP9_23_22, SCIFB0_TXD_B, SEL_SCIFB_1), + PINMUX_IPSR_DATA(IP9_25_24, SD1_DAT2), + PINMUX_IPSR_DATA(IP9_25_24, AVB_COL), + PINMUX_IPSR_DATA(IP9_25_24, MII_COL), + PINMUX_IPSR_MODSEL_DATA(IP9_25_24, SCIFB0_CTS_N_B, SEL_SCIFB_1), + PINMUX_IPSR_DATA(IP9_27_26, SD1_DAT3), + PINMUX_IPSR_DATA(IP9_27_26, AVB_RXD0), + PINMUX_IPSR_DATA(IP9_27_26, MII_RXD0), + PINMUX_IPSR_MODSEL_DATA(IP9_27_26, SCIFB0_RTS_N_B, SEL_SCIFB_1), + PINMUX_IPSR_DATA(IP9_31_28, SD1_CD), + PINMUX_IPSR_DATA(IP9_31_28, MMC1_D6), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, TS_SDEN1, SEL_TSIF1_0), + PINMUX_IPSR_DATA(IP9_31_28, USB1_EXTP), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, GLO_SS, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, VI0_CLK_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, SCL2_D, SEL_IIC2_3), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, SCL2_CIS_D, SEL_I2C2_3), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, SIM0_CLK_B, SEL_SIM_1), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, VI3_CLK_B, SEL_VI3_1), + + PINMUX_IPSR_DATA(IP10_3_0, SD1_WP), + PINMUX_IPSR_DATA(IP10_3_0, MMC1_D7), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, TS_SPSYNC1, SEL_TSIF1_0), + PINMUX_IPSR_DATA(IP10_3_0, USB1_IDIN), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, GLO_RFON, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, VI1_CLK_B, SEL_VI1_1), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, SDA2_D, SEL_IIC2_3), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, SDA2_CIS_D, SEL_I2C2_3), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, SIM0_D_B, SEL_SIM_1), + PINMUX_IPSR_DATA(IP10_6_4, SD2_CLK), + PINMUX_IPSR_DATA(IP10_6_4, MMC0_CLK), + PINMUX_IPSR_MODSEL_DATA(IP10_6_4, SIM0_CLK, SEL_SIM_0), + PINMUX_IPSR_MODSEL_DATA(IP10_6_4, VI0_DATA0_VI0_B0_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_6_4, TS_SDEN0_C, SEL_TSIF0_2), + PINMUX_IPSR_MODSEL_DATA(IP10_6_4, GLO_SCLK_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_6_4, VI3_DATA0_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_10_7, SD2_CMD), + PINMUX_IPSR_DATA(IP10_10_7, MMC0_CMD), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, SIM0_D, SEL_SIM_0), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, VI0_DATA1_VI0_B1_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, SCIFB1_SCK_E, SEL_SCIFB1_4), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, SCK1_D, SEL_SCIF1_3), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, TS_SPSYNC0_C, SEL_TSIF0_2), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, GLO_SDATA_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, VI3_DATA1_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_14_11, SD2_DAT0), + PINMUX_IPSR_DATA(IP10_14_11, MMC0_D0), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, FMCLK_B, SEL_FM_1), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, VI0_DATA2_VI0_B2_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, SCIFB1_RXD_E, SEL_SCIFB1_4), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, RX1_D, SEL_SCIF1_3), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, TS_SDAT0_C, SEL_TSIF0_2), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, GLO_SS_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, VI3_DATA2_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_18_15, SD2_DAT1), + PINMUX_IPSR_DATA(IP10_18_15, MMC0_D1), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, FMIN_B, SEL_FM_1), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, RDS_DATA, SEL_RDS_0), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, VI0_DATA3_VI0_B3_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, SCIFB1_TXD_E, SEL_SCIFB1_4), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, TX1_D, SEL_SCIF1_3), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, TS_SCK0_C, SEL_TSIF0_2), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, GLO_RFON_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, VI3_DATA3_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_22_19, SD2_DAT2), + PINMUX_IPSR_DATA(IP10_22_19, MMC0_D2), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, BPFCLK_B, SEL_FM_1), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, RDS_CLK, SEL_RDS_0), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, VI0_DATA4_VI0_B4_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, HRX0_D, SEL_HSCIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, TS_SDEN1_B, SEL_TSIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, GLO_Q0_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, VI3_DATA4_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_25_23, SD2_DAT3), + PINMUX_IPSR_DATA(IP10_25_23, MMC0_D3), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, SIM0_RST, SEL_SIM_0), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, VI0_DATA5_VI0_B5_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, HTX0_D, SEL_HSCIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, TS_SPSYNC1_B, SEL_TSIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, GLO_Q1_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, VI3_DATA5_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_29_26, SD2_CD), + PINMUX_IPSR_DATA(IP10_29_26, MMC0_D4), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, TS_SDAT0_B, SEL_TSIF0_1), + PINMUX_IPSR_DATA(IP10_29_26, USB2_EXTP), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, GLO_I0, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, VI0_DATA6_VI0_B6_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, HCTS0_N_D, SEL_HSCIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, TS_SDAT1_B, SEL_TSIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, GLO_I0_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, VI3_DATA6_B, SEL_VI3_1), + + PINMUX_IPSR_DATA(IP11_3_0, SD2_WP), + PINMUX_IPSR_DATA(IP11_3_0, MMC0_D5), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, TS_SCK0_B, SEL_TSIF0_1), + PINMUX_IPSR_DATA(IP11_3_0, USB2_IDIN), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, GLO_I1, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, VI0_DATA7_VI0_B7_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, HRTS0_N_D, SEL_HSCIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, TS_SCK1_B, SEL_TSIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, GLO_I1_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, VI3_DATA7_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP11_4, SD3_CLK), + PINMUX_IPSR_DATA(IP11_4, MMC1_CLK), + PINMUX_IPSR_DATA(IP11_6_5, SD3_CMD), + PINMUX_IPSR_DATA(IP11_6_5, MMC1_CMD), + PINMUX_IPSR_DATA(IP11_6_5, MTS_N), + PINMUX_IPSR_DATA(IP11_8_7, SD3_DAT0), + PINMUX_IPSR_DATA(IP11_8_7, MMC1_D0), + PINMUX_IPSR_DATA(IP11_8_7, STM_N), + PINMUX_IPSR_DATA(IP11_10_9, SD3_DAT1), + PINMUX_IPSR_DATA(IP11_10_9, MMC1_D1), + PINMUX_IPSR_DATA(IP11_10_9, MDATA), + PINMUX_IPSR_DATA(IP11_12_11, SD3_DAT2), + PINMUX_IPSR_DATA(IP11_12_11, MMC1_D2), + PINMUX_IPSR_DATA(IP11_12_11, SDATA), + PINMUX_IPSR_DATA(IP11_14_13, SD3_DAT3), + PINMUX_IPSR_DATA(IP11_14_13, MMC1_D3), + PINMUX_IPSR_DATA(IP11_14_13, SCKZ), + PINMUX_IPSR_DATA(IP11_17_15, SD3_CD), + PINMUX_IPSR_DATA(IP11_17_15, MMC1_D4), + PINMUX_IPSR_MODSEL_DATA(IP11_17_15, TS_SDAT1, SEL_TSIF1_0), + PINMUX_IPSR_DATA(IP11_17_15, VSP), + PINMUX_IPSR_MODSEL_DATA(IP11_17_15, GLO_Q0, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP11_17_15, SIM0_RST_B, SEL_SIM_1), + PINMUX_IPSR_DATA(IP11_21_18, SD3_WP), + PINMUX_IPSR_DATA(IP11_21_18, MMC1_D5), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, TS_SCK1, SEL_TSIF1_0), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, GLO_Q1, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, FMIN_C, SEL_FM_2), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, RDS_DATA_B, SEL_RDS_1), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, FMIN_E, SEL_FM_4), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, RDS_DATA_D, SEL_RDS_3), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, FMIN_F, SEL_FM_5), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, RDS_DATA_E, SEL_RDS_4), + PINMUX_IPSR_DATA(IP11_23_22, MLB_CLK), + PINMUX_IPSR_MODSEL_DATA(IP11_23_22, SCL2_B, SEL_IIC2_1), + PINMUX_IPSR_MODSEL_DATA(IP11_23_22, SCL2_CIS_B, SEL_I2C2_1), + PINMUX_IPSR_DATA(IP11_26_24, MLB_SIG), + PINMUX_IPSR_MODSEL_DATA(IP11_26_24, SCIFB1_RXD_D, SEL_SCIFB1_3), + PINMUX_IPSR_MODSEL_DATA(IP11_26_24, RX1_C, SEL_SCIF1_2), + PINMUX_IPSR_MODSEL_DATA(IP11_26_24, SDA2_B, SEL_IIC2_1), + PINMUX_IPSR_MODSEL_DATA(IP11_26_24, SDA2_CIS_B, SEL_I2C2_1), + PINMUX_IPSR_DATA(IP11_29_27, MLB_DAT), + PINMUX_IPSR_DATA(IP11_29_27, SPV_EVEN), + PINMUX_IPSR_MODSEL_DATA(IP11_29_27, SCIFB1_TXD_D, SEL_SCIFB1_3), + PINMUX_IPSR_MODSEL_DATA(IP11_29_27, TX1_C, SEL_SCIF1_2), + PINMUX_IPSR_MODSEL_DATA(IP11_29_27, BPFCLK_C, SEL_FM_2), + PINMUX_IPSR_MODSEL_DATA(IP11_29_27, RDS_CLK_B, SEL_RDS_1), + PINMUX_IPSR_DATA(IP11_31_30, SSI_SCK0129), + PINMUX_IPSR_MODSEL_DATA(IP11_31_30, CAN_CLK_B, SEL_CANCLK_1), + PINMUX_IPSR_DATA(IP11_31_30, MOUT0), + + PINMUX_IPSR_DATA(IP12_1_0, SSI_WS0129), + PINMUX_IPSR_MODSEL_DATA(IP12_1_0, CAN0_TX_B, SEL_CAN0_1), + PINMUX_IPSR_DATA(IP12_1_0, MOUT1), + PINMUX_IPSR_DATA(IP12_3_2, SSI_SDATA0), + PINMUX_IPSR_MODSEL_DATA(IP12_3_2, CAN0_RX_B, SEL_CAN0_1), + PINMUX_IPSR_DATA(IP12_3_2, MOUT2), + PINMUX_IPSR_DATA(IP12_5_4, SSI_SDATA1), + PINMUX_IPSR_MODSEL_DATA(IP12_5_4, CAN1_TX_B, SEL_CAN1_1), + PINMUX_IPSR_DATA(IP12_5_4, MOUT5), + PINMUX_IPSR_DATA(IP12_7_6, SSI_SDATA2), + PINMUX_IPSR_MODSEL_DATA(IP12_7_6, CAN1_RX_B, SEL_CAN1_1), + PINMUX_IPSR_MODSEL_DATA(IP12_7_6, CAN1_TX_B, SEL_CAN1_1), + PINMUX_IPSR_DATA(IP12_7_6, MOUT6), + PINMUX_IPSR_DATA(IP12_10_8, SSI_SCK34), + PINMUX_IPSR_DATA(IP12_10_8, STP_OPWM_0), + PINMUX_IPSR_MODSEL_DATA(IP12_10_8, SCIFB0_SCK, SEL_SCIFB_0), + PINMUX_IPSR_MODSEL_DATA(IP12_10_8, MSIOF1_SCK, SEL_SOF1_0), + PINMUX_IPSR_DATA(IP12_10_8, CAN_DEBUG_HW_TRIGGER), + PINMUX_IPSR_DATA(IP12_13_11, SSI_WS34), + PINMUX_IPSR_MODSEL_DATA(IP12_13_11, STP_IVCXO27_0, SEL_SSP_0), + PINMUX_IPSR_MODSEL_DATA(IP12_13_11, SCIFB0_RXD, SEL_SCIFB_0), + PINMUX_IPSR_DATA(IP12_13_11, MSIOF1_SYNC), + PINMUX_IPSR_DATA(IP12_13_11, CAN_STEP0), + PINMUX_IPSR_DATA(IP12_16_14, SSI_SDATA3), + PINMUX_IPSR_MODSEL_DATA(IP12_16_14, STP_ISCLK_0, SEL_SSP_0), + PINMUX_IPSR_MODSEL_DATA(IP12_16_14, SCIFB0_TXD, SEL_SCIFB_0), + PINMUX_IPSR_MODSEL_DATA(IP12_16_14, MSIOF1_SS1, SEL_SOF1_0), + PINMUX_IPSR_DATA(IP12_16_14, CAN_TXCLK), + PINMUX_IPSR_DATA(IP12_19_17, SSI_SCK4), + PINMUX_IPSR_MODSEL_DATA(IP12_19_17, STP_ISD_0, SEL_SSP_0), + PINMUX_IPSR_MODSEL_DATA(IP12_19_17, SCIFB0_CTS_N, SEL_SCIFB_0), + PINMUX_IPSR_MODSEL_DATA(IP12_19_17, MSIOF1_SS2, SEL_SOF1_0), + PINMUX_IPSR_MODSEL_DATA(IP12_19_17, SSI_SCK5_C, SEL_SSI5_2), + PINMUX_IPSR_DATA(IP12_19_17, CAN_DEBUGOUT0), + PINMUX_IPSR_DATA(IP12_22_20, SSI_WS4), + PINMUX_IPSR_MODSEL_DATA(IP12_22_20, STP_ISEN_0, SEL_SSP_0), + PINMUX_IPSR_MODSEL_DATA(IP12_22_20, SCIFB0_RTS_N, SEL_SCIFB_0), + PINMUX_IPSR_MODSEL_DATA(IP12_22_20, MSIOF1_TXD, SEL_SOF1_0), + PINMUX_IPSR_MODSEL_DATA(IP12_22_20, SSI_WS5_C, SEL_SSI5_2), + PINMUX_IPSR_DATA(IP12_22_20, CAN_DEBUGOUT1), + PINMUX_IPSR_DATA(IP12_24_23, SSI_SDATA4), + PINMUX_IPSR_MODSEL_DATA(IP12_24_23, STP_ISSYNC_0, SEL_SSP_0), + PINMUX_IPSR_MODSEL_DATA(IP12_24_23, MSIOF1_RXD, SEL_SOF1_0), + PINMUX_IPSR_DATA(IP12_24_23, CAN_DEBUGOUT2), + PINMUX_IPSR_MODSEL_DATA(IP12_27_25, SSI_SCK5, SEL_SSI5_0), + PINMUX_IPSR_MODSEL_DATA(IP12_27_25, SCIFB1_SCK, SEL_SCIFB1_0), + PINMUX_IPSR_MODSEL_DATA(IP12_27_25, IERX_B, SEL_IEB_1), + PINMUX_IPSR_DATA(IP12_27_25, DU2_EXHSYNC_DU2_HSYNC), + PINMUX_IPSR_DATA(IP12_27_25, QSTH_QHS), + PINMUX_IPSR_DATA(IP12_27_25, CAN_DEBUGOUT3), + PINMUX_IPSR_MODSEL_DATA(IP12_30_28, SSI_WS5, SEL_SSI5_0), + PINMUX_IPSR_MODSEL_DATA(IP12_30_28, SCIFB1_RXD, SEL_SCIFB1_0), + PINMUX_IPSR_MODSEL_DATA(IP12_30_28, IECLK_B, SEL_IEB_1), + PINMUX_IPSR_DATA(IP12_30_28, DU2_EXVSYNC_DU2_VSYNC), + PINMUX_IPSR_DATA(IP12_30_28, QSTB_QHE), + PINMUX_IPSR_DATA(IP12_30_28, CAN_DEBUGOUT4), + + PINMUX_IPSR_MODSEL_DATA(IP13_2_0, SSI_SDATA5, SEL_SSI5_0), + PINMUX_IPSR_MODSEL_DATA(IP13_2_0, SCIFB1_TXD, SEL_SCIFB1_0), + PINMUX_IPSR_MODSEL_DATA(IP13_2_0, IETX_B, SEL_IEB_1), + PINMUX_IPSR_DATA(IP13_2_0, DU2_DR2), + PINMUX_IPSR_DATA(IP13_2_0, LCDOUT2), + PINMUX_IPSR_DATA(IP13_2_0, CAN_DEBUGOUT5), + PINMUX_IPSR_MODSEL_DATA(IP13_6_3, SSI_SCK6, SEL_SSI6_0), + PINMUX_IPSR_MODSEL_DATA(IP13_6_3, SCIFB1_CTS_N, SEL_SCIFB1_0), + PINMUX_IPSR_MODSEL_DATA(IP13_6_3, BPFCLK_D, SEL_FM_3), + PINMUX_IPSR_MODSEL_DATA(IP13_6_3, RDS_CLK_C, SEL_RDS_2), + PINMUX_IPSR_DATA(IP13_6_3, DU2_DR3), + PINMUX_IPSR_DATA(IP13_6_3, LCDOUT3), + PINMUX_IPSR_DATA(IP13_6_3, CAN_DEBUGOUT6), + PINMUX_IPSR_MODSEL_DATA(IP13_6_3, BPFCLK_F, SEL_FM_5), + PINMUX_IPSR_MODSEL_DATA(IP13_6_3, RDS_CLK_E, SEL_RDS_4), + PINMUX_IPSR_MODSEL_DATA(IP13_9_7, SSI_WS6, SEL_SSI6_0), + PINMUX_IPSR_MODSEL_DATA(IP13_9_7, SCIFB1_RTS_N, SEL_SCIFB1_0), + PINMUX_IPSR_MODSEL_DATA(IP13_9_7, CAN0_TX_D, SEL_CAN0_3), + PINMUX_IPSR_DATA(IP13_9_7, DU2_DR4), + PINMUX_IPSR_DATA(IP13_9_7, LCDOUT4), + PINMUX_IPSR_DATA(IP13_9_7, CAN_DEBUGOUT7), + PINMUX_IPSR_MODSEL_DATA(IP13_12_10, SSI_SDATA6, SEL_SSI6_0), + PINMUX_IPSR_MODSEL_DATA(IP13_12_10, FMIN_D, SEL_FM_3), + PINMUX_IPSR_MODSEL_DATA(IP13_12_10, RDS_DATA_C, SEL_RDS_2), + PINMUX_IPSR_DATA(IP13_12_10, DU2_DR5), + PINMUX_IPSR_DATA(IP13_12_10, LCDOUT5), + PINMUX_IPSR_DATA(IP13_12_10, CAN_DEBUGOUT8), + PINMUX_IPSR_MODSEL_DATA(IP13_15_13, SSI_SCK78, SEL_SSI7_0), + PINMUX_IPSR_MODSEL_DATA(IP13_15_13, STP_IVCXO27_1, SEL_SSP_0), + PINMUX_IPSR_MODSEL_DATA(IP13_15_13, SCK1, SEL_SCIF1_0), + PINMUX_IPSR_MODSEL_DATA(IP13_15_13, SCIFA1_SCK, SEL_SCIFA1_0), + PINMUX_IPSR_DATA(IP13_15_13, DU2_DR6), + PINMUX_IPSR_DATA(IP13_15_13, LCDOUT6), + PINMUX_IPSR_DATA(IP13_15_13, CAN_DEBUGOUT9), + PINMUX_IPSR_MODSEL_DATA(IP13_18_16, SSI_WS78, SEL_SSI7_0), + PINMUX_IPSR_MODSEL_DATA(IP13_18_16, STP_ISCLK_1, SEL_SSP_0), + PINMUX_IPSR_MODSEL_DATA(IP13_18_16, SCIFB2_SCK, SEL_SCIFB2_0), + PINMUX_IPSR_DATA(IP13_18_16, SCIFA2_CTS_N), + PINMUX_IPSR_DATA(IP13_18_16, DU2_DR7), + PINMUX_IPSR_DATA(IP13_18_16, LCDOUT7), + PINMUX_IPSR_DATA(IP13_18_16, CAN_DEBUGOUT10), + PINMUX_IPSR_MODSEL_DATA(IP13_22_19, SSI_SDATA7, SEL_SSI7_0), + PINMUX_IPSR_MODSEL_DATA(IP13_22_19, STP_ISD_1, SEL_SSP_0), + PINMUX_IPSR_MODSEL_DATA(IP13_22_19, SCIFB2_RXD, SEL_SCIFB2_0), + PINMUX_IPSR_DATA(IP13_22_19, SCIFA2_RTS_N), + PINMUX_IPSR_DATA(IP13_22_19, TCLK2), + PINMUX_IPSR_DATA(IP13_22_19, QSTVA_QVS), + PINMUX_IPSR_DATA(IP13_22_19, CAN_DEBUGOUT11), + PINMUX_IPSR_MODSEL_DATA(IP13_22_19, BPFCLK_E, SEL_FM_4), + PINMUX_IPSR_MODSEL_DATA(IP13_22_19, RDS_CLK_D, SEL_RDS_3), + PINMUX_IPSR_MODSEL_DATA(IP13_22_19, SSI_SDATA7_B, SEL_SSI7_1), + PINMUX_IPSR_MODSEL_DATA(IP13_22_19, FMIN_G, SEL_FM_6), + PINMUX_IPSR_MODSEL_DATA(IP13_22_19, RDS_DATA_F, SEL_RDS_5), + PINMUX_IPSR_MODSEL_DATA(IP13_25_23, SSI_SDATA8, SEL_SSI8_0), + PINMUX_IPSR_MODSEL_DATA(IP13_25_23, STP_ISEN_1, SEL_SSP_0), + PINMUX_IPSR_MODSEL_DATA(IP13_25_23, SCIFB2_TXD, SEL_SCIFB2_0), + PINMUX_IPSR_MODSEL_DATA(IP13_25_23, CAN0_TX_C, SEL_CAN0_2), + PINMUX_IPSR_DATA(IP13_25_23, CAN_DEBUGOUT12), + PINMUX_IPSR_MODSEL_DATA(IP13_25_23, SSI_SDATA8_B, SEL_SSI8_1), + PINMUX_IPSR_DATA(IP13_28_26, SSI_SDATA9), + PINMUX_IPSR_MODSEL_DATA(IP13_28_26, STP_ISSYNC_1, SEL_SSP_0), + PINMUX_IPSR_MODSEL_DATA(IP13_28_26, SCIFB2_CTS_N, SEL_SCIFB2_0), + PINMUX_IPSR_DATA(IP13_28_26, SSI_WS1), + PINMUX_IPSR_MODSEL_DATA(IP13_28_26, SSI_SDATA5_C, SEL_SSI5_2), + PINMUX_IPSR_DATA(IP13_28_26, CAN_DEBUGOUT13), + PINMUX_IPSR_DATA(IP13_30_29, AUDIO_CLKA), + PINMUX_IPSR_MODSEL_DATA(IP13_30_29, SCIFB2_RTS_N, SEL_SCIFB2_0), + PINMUX_IPSR_DATA(IP13_30_29, CAN_DEBUGOUT14), + + PINMUX_IPSR_DATA(IP14_2_0, AUDIO_CLKB), + PINMUX_IPSR_MODSEL_DATA(IP14_2_0, SCIF_CLK, SEL_SCIFCLK_0), + PINMUX_IPSR_MODSEL_DATA(IP14_2_0, CAN0_RX_D, SEL_CAN0_3), + PINMUX_IPSR_DATA(IP14_2_0, DVC_MUTE), + PINMUX_IPSR_MODSEL_DATA(IP14_2_0, CAN0_RX_C, SEL_CAN0_2), + PINMUX_IPSR_DATA(IP14_2_0, CAN_DEBUGOUT15), + PINMUX_IPSR_DATA(IP14_2_0, REMOCON), + PINMUX_IPSR_MODSEL_DATA(IP14_5_3, SCIFA0_SCK, SEL_SCFA_0), + PINMUX_IPSR_MODSEL_DATA(IP14_5_3, HSCK1, SEL_HSCIF1_0), + PINMUX_IPSR_DATA(IP14_5_3, SCK0), + PINMUX_IPSR_DATA(IP14_5_3, MSIOF3_SS2), + PINMUX_IPSR_DATA(IP14_5_3, DU2_DG2), + PINMUX_IPSR_DATA(IP14_5_3, LCDOUT10), + PINMUX_IPSR_MODSEL_DATA(IP14_5_3, SDA1_C, SEL_IIC1_2), + PINMUX_IPSR_MODSEL_DATA(IP14_5_3, SDA1_CIS_C, SEL_I2C1_2), + PINMUX_IPSR_MODSEL_DATA(IP14_8_6, SCIFA0_RXD, SEL_SCFA_0), + PINMUX_IPSR_MODSEL_DATA(IP14_8_6, HRX1, SEL_HSCIF1_0), + PINMUX_IPSR_MODSEL_DATA(IP14_8_6, RX0, SEL_SCIF0_0), + PINMUX_IPSR_DATA(IP14_8_6, DU2_DR0), + PINMUX_IPSR_DATA(IP14_8_6, LCDOUT0), + PINMUX_IPSR_MODSEL_DATA(IP14_11_9, SCIFA0_TXD, SEL_SCFA_0), + PINMUX_IPSR_MODSEL_DATA(IP14_11_9, HTX1, SEL_HSCIF1_0), + PINMUX_IPSR_MODSEL_DATA(IP14_11_9, TX0, SEL_SCIF0_0), + PINMUX_IPSR_DATA(IP14_11_9, DU2_DR1), + PINMUX_IPSR_DATA(IP14_11_9, LCDOUT1), + PINMUX_IPSR_MODSEL_DATA(IP14_15_12, SCIFA0_CTS_N, SEL_SCFA_0), + PINMUX_IPSR_MODSEL_DATA(IP14_15_12, HCTS1_N, SEL_HSCIF1_0), + PINMUX_IPSR_MODSEL_DATA(IP14_15_12, CTS0_N, SEL_SCIF0_0), + PINMUX_IPSR_MODSEL_DATA(IP14_15_12, MSIOF3_SYNC, SEL_SOF3_0), + PINMUX_IPSR_DATA(IP14_15_12, DU2_DG3), + PINMUX_IPSR_MODSEL_DATA(IP14_15_12, LCDOUT11, SEL_HSCIF1_0), + PINMUX_IPSR_MODSEL_DATA(IP14_15_12, PWM0_B, SEL_SCIF0_0), + PINMUX_IPSR_MODSEL_DATA(IP14_15_12, SCL1_C, SEL_IIC1_2), + PINMUX_IPSR_MODSEL_DATA(IP14_15_12, SCL1_CIS_C, SEL_I2C1_2), + PINMUX_IPSR_MODSEL_DATA(IP14_18_16, SCIFA0_RTS_N, SEL_SCFA_0), + PINMUX_IPSR_MODSEL_DATA(IP14_18_16, HRTS1_N, SEL_HSCIF1_0), + PINMUX_IPSR_DATA(IP14_18_16, RTS0_N_TANS), + PINMUX_IPSR_DATA(IP14_18_16, MSIOF3_SS1), + PINMUX_IPSR_DATA(IP14_18_16, DU2_DG0), + PINMUX_IPSR_DATA(IP14_18_16, LCDOUT8), + PINMUX_IPSR_DATA(IP14_18_16, PWM1_B), + PINMUX_IPSR_MODSEL_DATA(IP14_21_19, SCIFA1_RXD, SEL_SCIFA1_0), + PINMUX_IPSR_MODSEL_DATA(IP14_21_19, AD_DI, SEL_ADI_0), + PINMUX_IPSR_MODSEL_DATA(IP14_21_19, RX1, SEL_SCIF1_0), + PINMUX_IPSR_DATA(IP14_21_19, DU2_EXODDF_DU2_ODDF_DISP_CDE), + PINMUX_IPSR_DATA(IP14_21_19, QCPV_QDE), + PINMUX_IPSR_MODSEL_DATA(IP14_24_22, SCIFA1_TXD, SEL_SCIFA1_0), + PINMUX_IPSR_MODSEL_DATA(IP14_24_22, AD_DO, SEL_ADI_0), + PINMUX_IPSR_MODSEL_DATA(IP14_24_22, TX1, SEL_SCIF1_0), + PINMUX_IPSR_DATA(IP14_24_22, DU2_DG1), + PINMUX_IPSR_DATA(IP14_24_22, LCDOUT9), + PINMUX_IPSR_MODSEL_DATA(IP14_27_25, SCIFA1_CTS_N, SEL_SCIFA1_0), + PINMUX_IPSR_MODSEL_DATA(IP14_27_25, AD_CLK, SEL_ADI_0), + PINMUX_IPSR_DATA(IP14_27_25, CTS1_N), + PINMUX_IPSR_MODSEL_DATA(IP14_27_25, MSIOF3_RXD, SEL_SOF3_0), + PINMUX_IPSR_DATA(IP14_27_25, DU0_DOTCLKOUT), + PINMUX_IPSR_DATA(IP14_27_25, QCLK), + PINMUX_IPSR_MODSEL_DATA(IP14_30_28, SCIFA1_RTS_N, SEL_SCIFA1_0), + PINMUX_IPSR_MODSEL_DATA(IP14_30_28, AD_NCS_N, SEL_ADI_0), + PINMUX_IPSR_DATA(IP14_30_28, RTS1_N_TANS), + PINMUX_IPSR_MODSEL_DATA(IP14_30_28, MSIOF3_TXD, SEL_SOF3_0), + PINMUX_IPSR_DATA(IP14_30_28, DU1_DOTCLKOUT), + PINMUX_IPSR_DATA(IP14_30_28, QSTVB_QVE), + PINMUX_IPSR_MODSEL_DATA(IP14_30_28, HRTS0_N_C, SEL_HSCIF0_2), + + PINMUX_IPSR_MODSEL_DATA(IP15_2_0, SCIFA2_SCK, SEL_SCIFA2_0), + PINMUX_IPSR_MODSEL_DATA(IP15_2_0, FMCLK, SEL_FM_0), + PINMUX_IPSR_MODSEL_DATA(IP15_2_0, MSIOF3_SCK, SEL_SOF3_0), + PINMUX_IPSR_DATA(IP15_2_0, DU2_DG7), + PINMUX_IPSR_DATA(IP15_2_0, LCDOUT15), + PINMUX_IPSR_MODSEL_DATA(IP15_2_0, SCIF_CLK_B, SEL_SCIFCLK_0), + PINMUX_IPSR_MODSEL_DATA(IP15_5_3, SCIFA2_RXD, SEL_SCIFA2_0), + PINMUX_IPSR_MODSEL_DATA(IP15_5_3, FMIN, SEL_FM_0), + PINMUX_IPSR_DATA(IP15_5_3, DU2_DB0), + PINMUX_IPSR_DATA(IP15_5_3, LCDOUT16), + PINMUX_IPSR_MODSEL_DATA(IP15_5_3, SCL2, SEL_IIC2_0), + PINMUX_IPSR_MODSEL_DATA(IP15_5_3, SCL2_CIS, SEL_I2C2_0), + PINMUX_IPSR_MODSEL_DATA(IP15_8_6, SCIFA2_TXD, SEL_SCIFA2_0), + PINMUX_IPSR_MODSEL_DATA(IP15_8_6, BPFCLK, SEL_FM_0), + PINMUX_IPSR_DATA(IP15_8_6, DU2_DB1), + PINMUX_IPSR_DATA(IP15_8_6, LCDOUT17), + PINMUX_IPSR_MODSEL_DATA(IP15_8_6, SDA2, SEL_IIC2_0), + PINMUX_IPSR_MODSEL_DATA(IP15_8_6, SDA2_CIS, SEL_I2C2_0), + PINMUX_IPSR_DATA(IP15_11_9, HSCK0), + PINMUX_IPSR_MODSEL_DATA(IP15_11_9, TS_SDEN0, SEL_TSIF0_0), + PINMUX_IPSR_DATA(IP15_11_9, DU2_DG4), + PINMUX_IPSR_DATA(IP15_11_9, LCDOUT12), + PINMUX_IPSR_MODSEL_DATA(IP15_11_9, HCTS0_N_C, SEL_IIC2_0), + PINMUX_IPSR_MODSEL_DATA(IP15_11_9, SDA2_CIS, SEL_I2C2_0), + PINMUX_IPSR_MODSEL_DATA(IP15_13_12, HRX0, SEL_HSCIF0_0), + PINMUX_IPSR_DATA(IP15_13_12, DU2_DB2), + PINMUX_IPSR_DATA(IP15_13_12, LCDOUT18), + PINMUX_IPSR_MODSEL_DATA(IP15_15_14, HTX0, SEL_HSCIF0_0), + PINMUX_IPSR_DATA(IP15_15_14, DU2_DB3), + PINMUX_IPSR_DATA(IP15_15_14, LCDOUT19), + PINMUX_IPSR_MODSEL_DATA(IP15_17_16, HCTS0_N, SEL_HSCIF0_0), + PINMUX_IPSR_DATA(IP15_17_16, SSI_SCK9), + PINMUX_IPSR_DATA(IP15_17_16, DU2_DB4), + PINMUX_IPSR_DATA(IP15_17_16, LCDOUT20), + PINMUX_IPSR_MODSEL_DATA(IP15_19_18, HRTS0_N, SEL_HSCIF0_0), + PINMUX_IPSR_DATA(IP15_19_18, SSI_WS9), + PINMUX_IPSR_DATA(IP15_19_18, DU2_DB5), + PINMUX_IPSR_DATA(IP15_19_18, LCDOUT21), + PINMUX_IPSR_MODSEL_DATA(IP15_22_20, MSIOF0_SCK, SEL_SOF0_0), + PINMUX_IPSR_MODSEL_DATA(IP15_22_20, TS_SDAT0, SEL_TSIF0_0), + PINMUX_IPSR_DATA(IP15_22_20, ADICLK), + PINMUX_IPSR_DATA(IP15_22_20, DU2_DB6), + PINMUX_IPSR_DATA(IP15_22_20, LCDOUT22), + PINMUX_IPSR_DATA(IP15_25_23, MSIOF0_SYNC), + PINMUX_IPSR_MODSEL_DATA(IP15_25_23, TS_SCK0, SEL_TSIF0_0), + PINMUX_IPSR_DATA(IP15_25_23, SSI_SCK2), + PINMUX_IPSR_DATA(IP15_25_23, ADIDATA), + PINMUX_IPSR_DATA(IP15_25_23, DU2_DB7), + PINMUX_IPSR_DATA(IP15_25_23, LCDOUT23), + PINMUX_IPSR_MODSEL_DATA(IP15_25_23, SCIFA2_RXD_B, SEL_SCIFA2_1), + PINMUX_IPSR_MODSEL_DATA(IP15_27_26, MSIOF0_SS1, SEL_SOF0_0), + PINMUX_IPSR_DATA(IP15_27_26, ADICHS0), + PINMUX_IPSR_DATA(IP15_27_26, DU2_DG5), + PINMUX_IPSR_DATA(IP15_27_26, LCDOUT13), + PINMUX_IPSR_MODSEL_DATA(IP15_29_28, MSIOF0_TXD, SEL_SOF0_0), + PINMUX_IPSR_DATA(IP15_29_28, ADICHS1), + PINMUX_IPSR_DATA(IP15_29_28, DU2_DG6), + PINMUX_IPSR_DATA(IP15_29_28, LCDOUT14), + + PINMUX_IPSR_MODSEL_DATA(IP16_2_0, MSIOF0_SS2, SEL_SOF0_0), + PINMUX_IPSR_DATA(IP16_2_0, AUDIO_CLKOUT), + PINMUX_IPSR_DATA(IP16_2_0, ADICHS2), + PINMUX_IPSR_DATA(IP16_2_0, DU2_DISP), + PINMUX_IPSR_DATA(IP16_2_0, QPOLA), + PINMUX_IPSR_MODSEL_DATA(IP16_2_0, HTX0_C, SEL_HSCIF0_2), + PINMUX_IPSR_MODSEL_DATA(IP16_2_0, SCIFA2_TXD_B, SEL_SCIFA2_1), + PINMUX_IPSR_MODSEL_DATA(IP16_5_3, MSIOF0_RXD, SEL_SOF0_0), + PINMUX_IPSR_MODSEL_DATA(IP16_5_3, TS_SPSYNC0, SEL_TSIF0_0), + PINMUX_IPSR_DATA(IP16_5_3, SSI_WS2), + PINMUX_IPSR_DATA(IP16_5_3, ADICS_SAMP), + PINMUX_IPSR_DATA(IP16_5_3, DU2_CDE), + PINMUX_IPSR_DATA(IP16_5_3, QPOLB), + PINMUX_IPSR_MODSEL_DATA(IP16_5_3, HRX0_C, SEL_HSCIF0_2), + PINMUX_IPSR_DATA(IP16_6, USB1_PWEN), + PINMUX_IPSR_DATA(IP16_6, AUDIO_CLKOUT_D), + PINMUX_IPSR_DATA(IP16_7, USB1_OVC), + PINMUX_IPSR_MODSEL_DATA(IP16_7, TCLK1_B, SEL_TMU1_1), +}; + +static struct sh_pfc_pin pinmux_pins[] = { + PINMUX_GPIO_GP_ALL(), +}; + +/* - ETH -------------------------------------------------------------------- */ +static const unsigned int eth_link_pins[] = { + /* LINK */ + RCAR_GP_PIN(2, 22), +}; +static const unsigned int eth_link_mux[] = { + ETH_LINK_MARK, +}; +static const unsigned int eth_magic_pins[] = { + /* MAGIC */ + RCAR_GP_PIN(2, 27), +}; +static const unsigned int eth_magic_mux[] = { + ETH_MAGIC_MARK, +}; +static const unsigned int eth_mdio_pins[] = { + /* MDC, MDIO */ + RCAR_GP_PIN(2, 29), RCAR_GP_PIN(2, 24), +}; +static const unsigned int eth_mdio_mux[] = { + ETH_MDC_MARK, ETH_MDIO_MARK, +}; +static const unsigned int eth_rmii_pins[] = { + /* RXD[0:1], RX_ER, CRS_DV, TXD[0:1], TX_EN, REF_CLK */ + RCAR_GP_PIN(2, 20), RCAR_GP_PIN(2, 21), RCAR_GP_PIN(2, 19), + RCAR_GP_PIN(2, 18), RCAR_GP_PIN(2, 28), RCAR_GP_PIN(2, 25), + RCAR_GP_PIN(2, 26), RCAR_GP_PIN(2, 23), +}; +static const unsigned int eth_rmii_mux[] = { + ETH_RXD0_MARK, ETH_RXD1_MARK, ETH_RX_ER_MARK, ETH_CRS_DV_MARK, + ETH_TXD0_MARK, ETH_TXD1_MARK, ETH_TX_EN_MARK, ETH_REF_CLK_MARK, +}; +/* - INTC ------------------------------------------------------------------- */ +static const unsigned int intc_irq0_pins[] = { + /* IRQ */ + RCAR_GP_PIN(1, 25), +}; +static const unsigned int intc_irq0_mux[] = { + IRQ0_MARK, +}; +static const unsigned int intc_irq1_pins[] = { + /* IRQ */ + RCAR_GP_PIN(1, 27), +}; +static const unsigned int intc_irq1_mux[] = { + IRQ1_MARK, +}; +static const unsigned int intc_irq2_pins[] = { + /* IRQ */ + RCAR_GP_PIN(1, 29), +}; +static const unsigned int intc_irq2_mux[] = { + IRQ2_MARK, +}; +static const unsigned int intc_irq3_pins[] = { + /* IRQ */ + RCAR_GP_PIN(1, 23), +}; +static const unsigned int intc_irq3_mux[] = { + IRQ3_MARK, +}; +/* - SCIF0 ----------------------------------------------------------------- */ +static const unsigned int scif0_data_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(4, 28), RCAR_GP_PIN(4, 29), +}; +static const unsigned int scif0_data_mux[] = { + RX0_MARK, TX0_MARK, +}; +static const unsigned int scif0_clk_pins[] = { + /* SCK */ + RCAR_GP_PIN(4, 27), +}; +static const unsigned int scif0_clk_mux[] = { + SCK0_MARK, +}; +static const unsigned int scif0_ctrl_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(4, 31), RCAR_GP_PIN(4, 30), +}; +static const unsigned int scif0_ctrl_mux[] = { + RTS0_N_TANS_MARK, CTS0_N_MARK, +}; +static const unsigned int scif0_data_b_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(0, 4), RCAR_GP_PIN(0, 5), +}; +static const unsigned int scif0_data_b_mux[] = { + RX0_B_MARK, TX0_B_MARK, +}; +/* - SCIF1 ----------------------------------------------------------------- */ +static const unsigned int scif1_data_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(5, 0), RCAR_GP_PIN(5, 1), +}; +static const unsigned int scif1_data_mux[] = { + RX1_MARK, TX1_MARK, +}; +static const unsigned int scif1_clk_pins[] = { + /* SCK */ + RCAR_GP_PIN(4, 20), +}; +static const unsigned int scif1_clk_mux[] = { + SCK1_MARK, +}; +static const unsigned int scif1_ctrl_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(5, 3), RCAR_GP_PIN(5, 2), +}; +static const unsigned int scif1_ctrl_mux[] = { + RTS1_N_TANS_MARK, CTS1_N_MARK, +}; +static const unsigned int scif1_data_b_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(0, 14), RCAR_GP_PIN(0, 15), +}; +static const unsigned int scif1_data_b_mux[] = { + RX1_B_MARK, TX1_B_MARK, +}; +static const unsigned int scif1_data_c_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(4, 1), RCAR_GP_PIN(4, 2), +}; +static const unsigned int scif1_data_c_mux[] = { + RX1_C_MARK, TX1_C_MARK, +}; +static const unsigned int scif1_data_d_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(3, 18), RCAR_GP_PIN(3, 19), +}; +static const unsigned int scif1_data_d_mux[] = { + RX1_D_MARK, TX1_D_MARK, +}; +static const unsigned int scif1_clk_d_pins[] = { + /* SCK */ + RCAR_GP_PIN(3, 17), +}; +static const unsigned int scif1_clk_d_mux[] = { + SCK1_D_MARK, +}; +static const unsigned int scif1_data_e_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(2, 21), RCAR_GP_PIN(2, 22), +}; +static const unsigned int scif1_data_e_mux[] = { + RX1_E_MARK, TX1_E_MARK, +}; +static const unsigned int scif1_clk_e_pins[] = { + /* SCK */ + RCAR_GP_PIN(2, 20), +}; +static const unsigned int scif1_clk_e_mux[] = { + SCK1_E_MARK, +}; +/* - SCIFA0 ----------------------------------------------------------------- */ +static const unsigned int scifa0_data_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(4, 28), RCAR_GP_PIN(4, 29), +}; +static const unsigned int scifa0_data_mux[] = { + SCIFA0_RXD_MARK, SCIFA0_TXD_MARK, +}; +static const unsigned int scifa0_clk_pins[] = { + /* SCK */ + RCAR_GP_PIN(4, 27), +}; +static const unsigned int scifa0_clk_mux[] = { + SCIFA0_SCK_MARK, +}; +static const unsigned int scifa0_ctrl_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(4, 31), RCAR_GP_PIN(4, 30), +}; +static const unsigned int scifa0_ctrl_mux[] = { + SCIFA0_RTS_N_MARK, SCIFA0_CTS_N_MARK, +}; +static const unsigned int scifa0_data_b_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(1, 20), RCAR_GP_PIN(1, 21), +}; +static const unsigned int scifa0_data_b_mux[] = { + SCIFA0_RXD_B_MARK, SCIFA0_TXD_B_MARK +}; +static const unsigned int scifa0_clk_b_pins[] = { + /* SCK */ + RCAR_GP_PIN(1, 19), +}; +static const unsigned int scifa0_clk_b_mux[] = { + SCIFA0_SCK_B_MARK, +}; +static const unsigned int scifa0_ctrl_b_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(1, 23), RCAR_GP_PIN(1, 22), +}; +static const unsigned int scifa0_ctrl_b_mux[] = { + SCIFA0_RTS_N_B_MARK, SCIFA0_CTS_N_B_MARK, +}; +/* - SCIFA1 ----------------------------------------------------------------- */ +static const unsigned int scifa1_data_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(5, 0), RCAR_GP_PIN(5, 1), +}; +static const unsigned int scifa1_data_mux[] = { + SCIFA1_RXD_MARK, SCIFA1_TXD_MARK, +}; +static const unsigned int scifa1_clk_pins[] = { + /* SCK */ + RCAR_GP_PIN(4, 20), +}; +static const unsigned int scifa1_clk_mux[] = { + SCIFA1_SCK_MARK, +}; +static const unsigned int scifa1_ctrl_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(5, 3), RCAR_GP_PIN(5, 2), +}; +static const unsigned int scifa1_ctrl_mux[] = { + SCIFA1_RTS_N_MARK, SCIFA1_CTS_N_MARK, +}; +static const unsigned int scifa1_data_b_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(0, 24), RCAR_GP_PIN(0, 21), +}; +static const unsigned int scifa1_data_b_mux[] = { + SCIFA1_RXD_B_MARK, SCIFA1_TXD_B_MARK, +}; +static const unsigned int scifa1_clk_b_pins[] = { + /* SCK */ + RCAR_GP_PIN(0, 23), +}; +static const unsigned int scifa1_clk_b_mux[] = { + SCIFA1_SCK_B_MARK, +}; +static const unsigned int scifa1_ctrl_b_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(0, 22), RCAR_GP_PIN(0, 25), +}; +static const unsigned int scifa1_ctrl_b_mux[] = { + SCIFA1_RTS_N_B_MARK, SCIFA1_CTS_N_B_MARK, +}; +static const unsigned int scifa1_data_c_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(0, 9), RCAR_GP_PIN(0, 10), +}; +static const unsigned int scifa1_data_c_mux[] = { + SCIFA1_RXD_C_MARK, SCIFA1_TXD_C_MARK, +}; +static const unsigned int scifa1_clk_c_pins[] = { + /* SCK */ + RCAR_GP_PIN(0, 8), +}; +static const unsigned int scifa1_clk_c_mux[] = { + SCIFA1_SCK_C_MARK, +}; +static const unsigned int scifa1_ctrl_c_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(0, 12), RCAR_GP_PIN(0, 11), +}; +static const unsigned int scifa1_ctrl_c_mux[] = { + SCIFA1_RTS_N_C_MARK, SCIFA1_CTS_N_C_MARK, +}; +static const unsigned int scifa1_data_d_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(2, 11), RCAR_GP_PIN(2, 12), +}; +static const unsigned int scifa1_data_d_mux[] = { + SCIFA1_RXD_D_MARK, SCIFA1_TXD_D_MARK, +}; +static const unsigned int scifa1_clk_d_pins[] = { + /* SCK */ + RCAR_GP_PIN(2, 10), +}; +static const unsigned int scifa1_clk_d_mux[] = { + SCIFA1_SCK_D_MARK, +}; +static const unsigned int scifa1_ctrl_d_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(2, 14), RCAR_GP_PIN(2, 13), +}; +static const unsigned int scifa1_ctrl_d_mux[] = { + SCIFA1_RTS_N_D_MARK, SCIFA1_CTS_N_D_MARK, +}; +/* - SCIFA2 ----------------------------------------------------------------- */ +static const unsigned int scifa2_data_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(5, 5), RCAR_GP_PIN(5, 6), +}; +static const unsigned int scifa2_data_mux[] = { + SCIFA2_RXD_MARK, SCIFA2_TXD_MARK, +}; +static const unsigned int scifa2_clk_pins[] = { + /* SCK */ + RCAR_GP_PIN(5, 4), +}; +static const unsigned int scifa2_clk_mux[] = { + SCIFA2_SCK_MARK, +}; +static const unsigned int scifa2_ctrl_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(4, 22), RCAR_GP_PIN(4, 21), +}; +static const unsigned int scifa2_ctrl_mux[] = { + SCIFA2_RTS_N_MARK, SCIFA2_CTS_N_MARK, +}; +static const unsigned int scifa2_data_b_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 16), +}; +static const unsigned int scifa2_data_b_mux[] = { + SCIFA2_RXD_B_MARK, SCIFA2_TXD_B_MARK, +}; +static const unsigned int scifa2_data_c_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(5, 31), RCAR_GP_PIN(5, 30), +}; +static const unsigned int scifa2_data_c_mux[] = { + SCIFA2_RXD_C_MARK, SCIFA2_TXD_C_MARK, +}; +static const unsigned int scifa2_clk_c_pins[] = { + /* SCK */ + RCAR_GP_PIN(5, 29), +}; +static const unsigned int scifa2_clk_c_mux[] = { + SCIFA2_SCK_C_MARK, +}; +/* - SCIFB0 ----------------------------------------------------------------- */ +static const unsigned int scifb0_data_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(4, 9), RCAR_GP_PIN(4, 10), +}; +static const unsigned int scifb0_data_mux[] = { + SCIFB0_RXD_MARK, SCIFB0_TXD_MARK, +}; +static const unsigned int scifb0_clk_pins[] = { + /* SCK */ + RCAR_GP_PIN(4, 8), +}; +static const unsigned int scifb0_clk_mux[] = { + SCIFB0_SCK_MARK, +}; +static const unsigned int scifb0_ctrl_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(4, 12), RCAR_GP_PIN(4, 11), +}; +static const unsigned int scifb0_ctrl_mux[] = { + SCIFB0_RTS_N_MARK, SCIFB0_CTS_N_MARK, +}; +static const unsigned int scifb0_data_b_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(3, 10), RCAR_GP_PIN(3, 11), +}; +static const unsigned int scifb0_data_b_mux[] = { + SCIFB0_RXD_B_MARK, SCIFB0_TXD_B_MARK, +}; +static const unsigned int scifb0_clk_b_pins[] = { + /* SCK */ + RCAR_GP_PIN(3, 9), +}; +static const unsigned int scifb0_clk_b_mux[] = { + SCIFB0_SCK_B_MARK, +}; +static const unsigned int scifb0_ctrl_b_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(3, 13), RCAR_GP_PIN(3, 12), +}; +static const unsigned int scifb0_ctrl_b_mux[] = { + SCIFB0_RTS_N_B_MARK, SCIFB0_CTS_N_B_MARK, +}; +static const unsigned int scifb0_data_c_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(0, 4), RCAR_GP_PIN(0, 5), +}; +static const unsigned int scifb0_data_c_mux[] = { + SCIFB0_RXD_C_MARK, SCIFB0_TXD_C_MARK, +}; +/* - SCIFB1 ----------------------------------------------------------------- */ +static const unsigned int scifb1_data_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(4, 15), RCAR_GP_PIN(4, 16), +}; +static const unsigned int scifb1_data_mux[] = { + SCIFB1_RXD_MARK, SCIFB1_TXD_MARK, +}; +static const unsigned int scifb1_clk_pins[] = { + /* SCK */ + RCAR_GP_PIN(4, 14), +}; +static const unsigned int scifb1_clk_mux[] = { + SCIFB1_SCK_MARK, +}; +static const unsigned int scifb1_ctrl_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(4, 18), RCAR_GP_PIN(4, 17), +}; +static const unsigned int scifb1_ctrl_mux[] = { + SCIFB1_RTS_N_MARK, SCIFB1_CTS_N_MARK, +}; +static const unsigned int scifb1_data_b_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(3, 2), RCAR_GP_PIN(3, 3), +}; +static const unsigned int scifb1_data_b_mux[] = { + SCIFB1_RXD_B_MARK, SCIFB1_TXD_B_MARK, +}; +static const unsigned int scifb1_clk_b_pins[] = { + /* SCK */ + RCAR_GP_PIN(3, 1), +}; +static const unsigned int scifb1_clk_b_mux[] = { + SCIFB1_SCK_B_MARK, +}; +static const unsigned int scifb1_ctrl_b_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(3, 5), RCAR_GP_PIN(3, 4), +}; +static const unsigned int scifb1_ctrl_b_mux[] = { + SCIFB1_RTS_N_B_MARK, SCIFB1_CTS_N_B_MARK, +}; +static const unsigned int scifb1_data_c_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(0, 14), RCAR_GP_PIN(0, 15), +}; +static const unsigned int scifb1_data_c_mux[] = { + SCIFB1_RXD_C_MARK, SCIFB1_TXD_C_MARK, +}; +static const unsigned int scifb1_data_d_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(4, 1), RCAR_GP_PIN(4, 2), +}; +static const unsigned int scifb1_data_d_mux[] = { + SCIFB1_RXD_D_MARK, SCIFB1_TXD_D_MARK, +}; +static const unsigned int scifb1_data_e_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(3, 18), RCAR_GP_PIN(3, 19), +}; +static const unsigned int scifb1_data_e_mux[] = { + SCIFB1_RXD_E_MARK, SCIFB1_TXD_E_MARK, +}; +static const unsigned int scifb1_clk_e_pins[] = { + /* SCK */ + RCAR_GP_PIN(3, 17), +}; +static const unsigned int scifb1_clk_e_mux[] = { + SCIFB1_SCK_E_MARK, +}; +static const unsigned int scifb1_data_f_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(0, 4), RCAR_GP_PIN(0, 5), +}; +static const unsigned int scifb1_data_f_mux[] = { + SCIFB1_RXD_F_MARK, SCIFB1_TXD_F_MARK, +}; +static const unsigned int scifb1_data_g_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(2, 21), RCAR_GP_PIN(2, 22), +}; +static const unsigned int scifb1_data_g_mux[] = { + SCIFB1_RXD_G_MARK, SCIFB1_TXD_G_MARK, +}; +static const unsigned int scifb1_clk_g_pins[] = { + /* SCK */ + RCAR_GP_PIN(2, 20), +}; +static const unsigned int scifb1_clk_g_mux[] = { + SCIFB1_SCK_G_MARK, +}; +/* - SCIFB2 ----------------------------------------------------------------- */ +static const unsigned int scifb2_data_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(4, 22), RCAR_GP_PIN(4, 23), +}; +static const unsigned int scifb2_data_mux[] = { + SCIFB2_RXD_MARK, SCIFB2_TXD_MARK, +}; +static const unsigned int scifb2_clk_pins[] = { + /* SCK */ + RCAR_GP_PIN(4, 21), +}; +static const unsigned int scifb2_clk_mux[] = { + SCIFB2_SCK_MARK, +}; +static const unsigned int scifb2_ctrl_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(4, 25), RCAR_GP_PIN(4, 24), +}; +static const unsigned int scifb2_ctrl_mux[] = { + SCIFB2_RTS_N_MARK, SCIFB2_CTS_N_MARK, +}; +static const unsigned int scifb2_data_b_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(0, 28), RCAR_GP_PIN(0, 30), +}; +static const unsigned int scifb2_data_b_mux[] = { + SCIFB2_RXD_B_MARK, SCIFB2_TXD_B_MARK, +}; +static const unsigned int scifb2_clk_b_pins[] = { + /* SCK */ + RCAR_GP_PIN(0, 31), +}; +static const unsigned int scifb2_clk_b_mux[] = { + SCIFB2_SCK_B_MARK, +}; +static const unsigned int scifb2_ctrl_b_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(0, 29), RCAR_GP_PIN(0, 27), +}; +static const unsigned int scifb2_ctrl_b_mux[] = { + SCIFB2_RTS_N_B_MARK, SCIFB2_CTS_N_B_MARK, +}; +static const unsigned int scifb2_data_c_pins[] = { + /* RXD, TXD */ + RCAR_GP_PIN(0, 24), RCAR_GP_PIN(0, 25), +}; +static const unsigned int scifb2_data_c_mux[] = { + SCIFB2_RXD_C_MARK, SCIFB2_TXD_C_MARK, +}; +/* - TPU0 ------------------------------------------------------------------- */ +static const unsigned int tpu0_to0_pins[] = { + /* TO */ + RCAR_GP_PIN(0, 20), +}; +static const unsigned int tpu0_to0_mux[] = { + TPU0TO0_MARK, +}; +static const unsigned int tpu0_to1_pins[] = { + /* TO */ + RCAR_GP_PIN(0, 21), +}; +static const unsigned int tpu0_to1_mux[] = { + TPU0TO1_MARK, +}; +static const unsigned int tpu0_to2_pins[] = { + /* TO */ + RCAR_GP_PIN(0, 22), +}; +static const unsigned int tpu0_to2_mux[] = { + TPU0TO2_MARK, +}; +static const unsigned int tpu0_to3_pins[] = { + /* TO */ + RCAR_GP_PIN(0, 23), +}; +static const unsigned int tpu0_to3_mux[] = { + TPU0TO3_MARK, +}; + +/* - MMCIF ------------------------------------------------------------------ */ +static const unsigned int mmc0_data1_pins[] = { + /* D[0] */ + RCAR_GP_PIN(3, 18), +}; +static const unsigned int mmc0_data1_mux[] = { + MMC0_D0_MARK, +}; +static const unsigned int mmc0_data4_pins[] = { + /* D[0:3] */ + RCAR_GP_PIN(3, 18), RCAR_GP_PIN(3, 19), + RCAR_GP_PIN(3, 20), RCAR_GP_PIN(3, 21), +}; +static const unsigned int mmc0_data4_mux[] = { + MMC0_D0_MARK, MMC0_D1_MARK, MMC0_D2_MARK, MMC0_D3_MARK, +}; +static const unsigned int mmc0_data8_pins[] = { + /* D[0:7] */ + RCAR_GP_PIN(3, 18), RCAR_GP_PIN(3, 19), + RCAR_GP_PIN(3, 20), RCAR_GP_PIN(3, 21), + RCAR_GP_PIN(3, 22), RCAR_GP_PIN(3, 23), + RCAR_GP_PIN(3, 6), RCAR_GP_PIN(3, 7), +}; +static const unsigned int mmc0_data8_mux[] = { + MMC0_D0_MARK, MMC0_D1_MARK, MMC0_D2_MARK, MMC0_D3_MARK, + MMC0_D4_MARK, MMC0_D5_MARK, MMC0_D6_MARK, MMC0_D7_MARK, +}; +static const unsigned int mmc0_ctrl_pins[] = { + /* CLK, CMD */ + RCAR_GP_PIN(3, 16), RCAR_GP_PIN(3, 17), +}; +static const unsigned int mmc0_ctrl_mux[] = { + MMC0_CLK_MARK, MMC0_CMD_MARK, +}; + +static const unsigned int mmc1_data1_pins[] = { + /* D[0] */ + RCAR_GP_PIN(3, 26), +}; +static const unsigned int mmc1_data1_mux[] = { + MMC1_D0_MARK, +}; +static const unsigned int mmc1_data4_pins[] = { + /* D[0:3] */ + RCAR_GP_PIN(3, 26), RCAR_GP_PIN(3, 27), + RCAR_GP_PIN(3, 28), RCAR_GP_PIN(3, 29), +}; +static const unsigned int mmc1_data4_mux[] = { + MMC1_D0_MARK, MMC1_D1_MARK, MMC1_D2_MARK, MMC1_D3_MARK, +}; +static const unsigned int mmc1_data8_pins[] = { + /* D[0:7] */ + RCAR_GP_PIN(3, 26), RCAR_GP_PIN(3, 27), + RCAR_GP_PIN(3, 28), RCAR_GP_PIN(3, 29), + RCAR_GP_PIN(3, 30), RCAR_GP_PIN(3, 31), + RCAR_GP_PIN(3, 13), RCAR_GP_PIN(3, 14), +}; +static const unsigned int mmc1_data8_mux[] = { + MMC1_D0_MARK, MMC1_D1_MARK, MMC1_D2_MARK, MMC1_D3_MARK, + MMC1_D4_MARK, MMC1_D5_MARK, MMC1_D6_MARK, MMC1_D7_MARK, +}; +static const unsigned int mmc1_ctrl_pins[] = { + /* CLK, CMD */ + RCAR_GP_PIN(3, 24), RCAR_GP_PIN(3, 25), +}; +static const unsigned int mmc1_ctrl_mux[] = { + MMC1_CLK_MARK, MMC1_CMD_MARK, +}; + +/* - SDHI ------------------------------------------------------------------- */ +static const unsigned int sdhi0_data1_pins[] = { + /* D0 */ + RCAR_GP_PIN(3, 2), +}; +static const unsigned int sdhi0_data1_mux[] = { + SD0_DAT0_MARK, +}; +static const unsigned int sdhi0_data4_pins[] = { + /* D[0:3] */ + RCAR_GP_PIN(3, 2), RCAR_GP_PIN(3, 3), RCAR_GP_PIN(3, 4), RCAR_GP_PIN(3, 5), +}; +static const unsigned int sdhi0_data4_mux[] = { + SD0_DAT0_MARK, SD0_DAT1_MARK, SD0_DAT2_MARK, SD0_DAT3_MARK, +}; +static const unsigned int sdhi0_ctrl_pins[] = { + /* CLK, CMD */ + RCAR_GP_PIN(3, 0), RCAR_GP_PIN(3, 1), +}; +static const unsigned int sdhi0_ctrl_mux[] = { + SD0_CLK_MARK, SD0_CMD_MARK, +}; +static const unsigned int sdhi0_cd_pins[] = { + /* CD */ + RCAR_GP_PIN(3, 6), +}; +static const unsigned int sdhi0_cd_mux[] = { + SD0_CD_MARK, +}; +static const unsigned int sdhi0_wp_pins[] = { + /* WP */ + RCAR_GP_PIN(3, 7), +}; +static const unsigned int sdhi0_wp_mux[] = { + SD0_WP_MARK, +}; + +static const unsigned int sdhi1_data1_pins[] = { + /* D0 */ + RCAR_GP_PIN(3, 10), +}; +static const unsigned int sdhi1_data1_mux[] = { + SD1_DAT0_MARK, +}; +static const unsigned int sdhi1_data4_pins[] = { + /* D[0:3] */ + RCAR_GP_PIN(3, 10), RCAR_GP_PIN(3, 11), RCAR_GP_PIN(3, 12), RCAR_GP_PIN(3, 13), +}; +static const unsigned int sdhi1_data4_mux[] = { + SD1_DAT0_MARK, SD1_DAT1_MARK, SD1_DAT2_MARK, SD1_DAT3_MARK, +}; +static const unsigned int sdhi1_ctrl_pins[] = { + /* CLK, CMD */ + RCAR_GP_PIN(3, 8), RCAR_GP_PIN(3, 9), +}; +static const unsigned int sdhi1_ctrl_mux[] = { + SD1_CLK_MARK, SD1_CMD_MARK, +}; +static const unsigned int sdhi1_cd_pins[] = { + /* CD */ + RCAR_GP_PIN(3, 14), +}; +static const unsigned int sdhi1_cd_mux[] = { + SD1_CD_MARK, +}; +static const unsigned int sdhi1_wp_pins[] = { + /* WP */ + RCAR_GP_PIN(3, 15), +}; +static const unsigned int sdhi1_wp_mux[] = { + SD1_WP_MARK, +}; + +static const unsigned int sdhi2_data1_pins[] = { + /* D0 */ + RCAR_GP_PIN(3, 18), +}; +static const unsigned int sdhi2_data1_mux[] = { + SD2_DAT0_MARK, +}; +static const unsigned int sdhi2_data4_pins[] = { + /* D[0:3] */ + RCAR_GP_PIN(3, 18), RCAR_GP_PIN(3, 19), RCAR_GP_PIN(3, 20), RCAR_GP_PIN(3, 21), +}; +static const unsigned int sdhi2_data4_mux[] = { + SD2_DAT0_MARK, SD2_DAT1_MARK, SD2_DAT2_MARK, SD2_DAT3_MARK, +}; +static const unsigned int sdhi2_ctrl_pins[] = { + /* CLK, CMD */ + RCAR_GP_PIN(3, 16), RCAR_GP_PIN(3, 17), +}; +static const unsigned int sdhi2_ctrl_mux[] = { + SD2_CLK_MARK, SD2_CMD_MARK, +}; +static const unsigned int sdhi2_cd_pins[] = { + /* CD */ + RCAR_GP_PIN(3, 22), +}; +static const unsigned int sdhi2_cd_mux[] = { + SD2_CD_MARK, +}; +static const unsigned int sdhi2_wp_pins[] = { + /* WP */ + RCAR_GP_PIN(3, 23), +}; +static const unsigned int sdhi2_wp_mux[] = { + SD2_WP_MARK, +}; + +static const unsigned int sdhi3_data1_pins[] = { + /* D0 */ + RCAR_GP_PIN(3, 26), +}; +static const unsigned int sdhi3_data1_mux[] = { + SD3_DAT0_MARK, +}; +static const unsigned int sdhi3_data4_pins[] = { + /* D[0:3] */ + RCAR_GP_PIN(3, 26), RCAR_GP_PIN(3, 27), RCAR_GP_PIN(3, 28), RCAR_GP_PIN(3, 29), +}; +static const unsigned int sdhi3_data4_mux[] = { + SD3_DAT0_MARK, SD3_DAT1_MARK, SD3_DAT2_MARK, SD3_DAT3_MARK, +}; +static const unsigned int sdhi3_ctrl_pins[] = { + /* CLK, CMD */ + RCAR_GP_PIN(3, 24), RCAR_GP_PIN(3, 25), +}; +static const unsigned int sdhi3_ctrl_mux[] = { + SD3_CLK_MARK, SD3_CMD_MARK, +}; +static const unsigned int sdhi3_cd_pins[] = { + /* CD */ + RCAR_GP_PIN(3, 30), +}; +static const unsigned int sdhi3_cd_mux[] = { + SD3_CD_MARK, +}; +static const unsigned int sdhi3_wp_pins[] = { + /* WP */ + RCAR_GP_PIN(3, 31), +}; +static const unsigned int sdhi3_wp_mux[] = { + SD3_WP_MARK, +}; + +static const struct sh_pfc_pin_group pinmux_groups[] = { + SH_PFC_PIN_GROUP(eth_link), + SH_PFC_PIN_GROUP(eth_magic), + SH_PFC_PIN_GROUP(eth_mdio), + SH_PFC_PIN_GROUP(eth_rmii), + SH_PFC_PIN_GROUP(intc_irq0), + SH_PFC_PIN_GROUP(intc_irq1), + SH_PFC_PIN_GROUP(intc_irq2), + SH_PFC_PIN_GROUP(intc_irq3), + SH_PFC_PIN_GROUP(scif0_data), + SH_PFC_PIN_GROUP(scif0_clk), + SH_PFC_PIN_GROUP(scif0_ctrl), + SH_PFC_PIN_GROUP(scif0_data_b), + SH_PFC_PIN_GROUP(scif1_data), + SH_PFC_PIN_GROUP(scif1_clk), + SH_PFC_PIN_GROUP(scif1_ctrl), + SH_PFC_PIN_GROUP(scif1_data_b), + SH_PFC_PIN_GROUP(scif1_data_c), + SH_PFC_PIN_GROUP(scif1_data_d), + SH_PFC_PIN_GROUP(scif1_clk_d), + SH_PFC_PIN_GROUP(scif1_data_e), + SH_PFC_PIN_GROUP(scif1_clk_e), + SH_PFC_PIN_GROUP(scifa0_data), + SH_PFC_PIN_GROUP(scifa0_clk), + SH_PFC_PIN_GROUP(scifa0_ctrl), + SH_PFC_PIN_GROUP(scifa0_data_b), + SH_PFC_PIN_GROUP(scifa0_clk_b), + SH_PFC_PIN_GROUP(scifa0_ctrl_b), + SH_PFC_PIN_GROUP(scifa1_data), + SH_PFC_PIN_GROUP(scifa1_clk), + SH_PFC_PIN_GROUP(scifa1_ctrl), + SH_PFC_PIN_GROUP(scifa1_data_b), + SH_PFC_PIN_GROUP(scifa1_clk_b), + SH_PFC_PIN_GROUP(scifa1_ctrl_b), + SH_PFC_PIN_GROUP(scifa1_data_c), + SH_PFC_PIN_GROUP(scifa1_clk_c), + SH_PFC_PIN_GROUP(scifa1_ctrl_c), + SH_PFC_PIN_GROUP(scifa1_data_d), + SH_PFC_PIN_GROUP(scifa1_clk_d), + SH_PFC_PIN_GROUP(scifa1_ctrl_d), + SH_PFC_PIN_GROUP(scifa2_data), + SH_PFC_PIN_GROUP(scifa2_clk), + SH_PFC_PIN_GROUP(scifa2_ctrl), + SH_PFC_PIN_GROUP(scifa2_data_b), + SH_PFC_PIN_GROUP(scifa2_data_c), + SH_PFC_PIN_GROUP(scifa2_clk_c), + SH_PFC_PIN_GROUP(scifb0_data), + SH_PFC_PIN_GROUP(scifb0_clk), + SH_PFC_PIN_GROUP(scifb0_ctrl), + SH_PFC_PIN_GROUP(scifb0_data_b), + SH_PFC_PIN_GROUP(scifb0_clk_b), + SH_PFC_PIN_GROUP(scifb0_ctrl_b), + SH_PFC_PIN_GROUP(scifb0_data_c), + SH_PFC_PIN_GROUP(scifb1_data), + SH_PFC_PIN_GROUP(scifb1_clk), + SH_PFC_PIN_GROUP(scifb1_ctrl), + SH_PFC_PIN_GROUP(scifb1_data_b), + SH_PFC_PIN_GROUP(scifb1_clk_b), + SH_PFC_PIN_GROUP(scifb1_ctrl_b), + SH_PFC_PIN_GROUP(scifb1_data_c), + SH_PFC_PIN_GROUP(scifb1_data_d), + SH_PFC_PIN_GROUP(scifb1_data_e), + SH_PFC_PIN_GROUP(scifb1_clk_e), + SH_PFC_PIN_GROUP(scifb1_data_f), + SH_PFC_PIN_GROUP(scifb1_data_g), + SH_PFC_PIN_GROUP(scifb1_clk_g), + SH_PFC_PIN_GROUP(scifb2_data), + SH_PFC_PIN_GROUP(scifb2_clk), + SH_PFC_PIN_GROUP(scifb2_ctrl), + SH_PFC_PIN_GROUP(scifb2_data_b), + SH_PFC_PIN_GROUP(scifb2_clk_b), + SH_PFC_PIN_GROUP(scifb2_ctrl_b), + SH_PFC_PIN_GROUP(scifb2_data_c), + SH_PFC_PIN_GROUP(tpu0_to0), + SH_PFC_PIN_GROUP(tpu0_to1), + SH_PFC_PIN_GROUP(tpu0_to2), + SH_PFC_PIN_GROUP(tpu0_to3), + SH_PFC_PIN_GROUP(mmc0_data1), + SH_PFC_PIN_GROUP(mmc0_data4), + SH_PFC_PIN_GROUP(mmc0_data8), + SH_PFC_PIN_GROUP(mmc0_ctrl), + SH_PFC_PIN_GROUP(mmc1_data1), + SH_PFC_PIN_GROUP(mmc1_data4), + SH_PFC_PIN_GROUP(mmc1_data8), + SH_PFC_PIN_GROUP(mmc1_ctrl), + SH_PFC_PIN_GROUP(sdhi0_data1), + SH_PFC_PIN_GROUP(sdhi0_data4), + SH_PFC_PIN_GROUP(sdhi0_ctrl), + SH_PFC_PIN_GROUP(sdhi0_cd), + SH_PFC_PIN_GROUP(sdhi0_wp), + SH_PFC_PIN_GROUP(sdhi1_data1), + SH_PFC_PIN_GROUP(sdhi1_data4), + SH_PFC_PIN_GROUP(sdhi1_ctrl), + SH_PFC_PIN_GROUP(sdhi1_cd), + SH_PFC_PIN_GROUP(sdhi1_wp), + SH_PFC_PIN_GROUP(sdhi2_data1), + SH_PFC_PIN_GROUP(sdhi2_data4), + SH_PFC_PIN_GROUP(sdhi2_ctrl), + SH_PFC_PIN_GROUP(sdhi2_cd), + SH_PFC_PIN_GROUP(sdhi2_wp), + SH_PFC_PIN_GROUP(sdhi3_data1), + SH_PFC_PIN_GROUP(sdhi3_data4), + SH_PFC_PIN_GROUP(sdhi3_ctrl), + SH_PFC_PIN_GROUP(sdhi3_cd), + SH_PFC_PIN_GROUP(sdhi3_wp), +}; + +static const char * const eth_groups[] = { + "eth_link", + "eth_magic", + "eth_mdio", + "eth_rmii", +}; + +static const char * const intc_groups[] = { + "intc_irq0", + "intc_irq1", + "intc_irq2", + "intc_irq3", +}; + +static const char * const scif0_groups[] = { + "scif0_data", + "scif0_clk", + "scif0_ctrl", + "scif0_data_b", +}; + +static const char * const scif1_groups[] = { + "scif1_data", + "scif1_clk", + "scif1_ctrl", + "scif1_data_b", + "scif1_data_c", + "scif1_data_d", + "scif1_clk_d", + "scif1_data_e", + "scif1_clk_e", +}; + +static const char * const scifa0_groups[] = { + "scifa0_data", + "scifa0_clk", + "scifa0_ctrl", + "scifa0_data_b", + "scifa0_clk_b", + "scifa0_ctrl_b", +}; + +static const char * const scifa1_groups[] = { + "scifa1_data", + "scifa1_clk", + "scifa1_ctrl", + "scifa1_data_b", + "scifa1_clk_b", + "scifa1_ctrl_b", + "scifa1_data_c", + "scifa1_clk_c", + "scifa1_ctrl_c", + "scifa1_data_d", + "scifa1_clk_d", + "scifa1_ctrl_d", +}; + +static const char * const scifa2_groups[] = { + "scifa2_data", + "scifa2_clk", + "scifa2_ctrl", + "scifa2_data_b", + "scifa2_data_c", + "scifa2_clk_c", +}; + +static const char * const scifb0_groups[] = { + "scifb0_data", + "scifb0_clk", + "scifb0_ctrl", + "scifb0_data_b", + "scifb0_clk_b", + "scifb0_ctrl_b", + "scifb0_data_c", +}; + +static const char * const scifb1_groups[] = { + "scifb1_data", + "scifb1_clk", + "scifb1_ctrl", + "scifb1_data_b", + "scifb1_clk_b", + "scifb1_ctrl_b", + "scifb1_data_c", + "scifb1_data_d", + "scifb1_data_e", + "scifb1_clk_e", + "scifb1_data_f", + "scifb1_data_g", + "scifb1_clk_g", +}; + +static const char * const scifb2_groups[] = { + "scifb2_data", + "scifb2_clk", + "scifb2_ctrl", + "scifb2_data_b", + "scifb2_clk_b", + "scifb2_ctrl_b", + "scifb2_data_c", +}; + +static const char * const tpu0_groups[] = { + "tpu0_to0", + "tpu0_to1", + "tpu0_to2", + "tpu0_to3", +}; + +static const char * const mmc0_groups[] = { + "mmc0_data1", + "mmc0_data4", + "mmc0_data8", + "mmc0_ctrl", +}; + +static const char * const mmc1_groups[] = { + "mmc1_data1", + "mmc1_data4", + "mmc1_data8", + "mmc1_ctrl", +}; + +static const char * const sdhi0_groups[] = { + "sdhi0_data1", + "sdhi0_data4", + "sdhi0_ctrl", + "sdhi0_cd", + "sdhi0_wp", +}; + +static const char * const sdhi1_groups[] = { + "sdhi1_data1", + "sdhi1_data4", + "sdhi1_ctrl", + "sdhi1_cd", + "sdhi1_wp", +}; + +static const char * const sdhi2_groups[] = { + "sdhi2_data1", + "sdhi2_data4", + "sdhi2_ctrl", + "sdhi2_cd", + "sdhi2_wp", +}; + +static const char * const sdhi3_groups[] = { + "sdhi3_data1", + "sdhi3_data4", + "sdhi3_ctrl", + "sdhi3_cd", + "sdhi3_wp", +}; + +static const struct sh_pfc_function pinmux_functions[] = { + SH_PFC_FUNCTION(eth), + SH_PFC_FUNCTION(intc), + SH_PFC_FUNCTION(scif0), + SH_PFC_FUNCTION(scif1), + SH_PFC_FUNCTION(scifa0), + SH_PFC_FUNCTION(scifa1), + SH_PFC_FUNCTION(scifa2), + SH_PFC_FUNCTION(scifb0), + SH_PFC_FUNCTION(scifb1), + SH_PFC_FUNCTION(scifb2), + SH_PFC_FUNCTION(tpu0), + SH_PFC_FUNCTION(mmc0), + SH_PFC_FUNCTION(mmc1), + SH_PFC_FUNCTION(sdhi0), + SH_PFC_FUNCTION(sdhi1), + SH_PFC_FUNCTION(sdhi2), + SH_PFC_FUNCTION(sdhi3), +}; + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + { PINMUX_CFG_REG("GPSR0", 0xE6060004, 32, 1) { + GP_0_31_FN, FN_IP3_17_15, + GP_0_30_FN, FN_IP3_14_12, + GP_0_29_FN, FN_IP3_11_8, + GP_0_28_FN, FN_IP3_7_4, + GP_0_27_FN, FN_IP3_3_0, + GP_0_26_FN, FN_IP2_28_26, + GP_0_25_FN, FN_IP2_25_22, + GP_0_24_FN, FN_IP2_21_18, + GP_0_23_FN, FN_IP2_17_15, + GP_0_22_FN, FN_IP2_14_12, + GP_0_21_FN, FN_IP2_11_9, + GP_0_20_FN, FN_IP2_8_6, + GP_0_19_FN, FN_IP2_5_3, + GP_0_18_FN, FN_IP2_2_0, + GP_0_17_FN, FN_IP1_29_28, + GP_0_16_FN, FN_IP1_27_26, + GP_0_15_FN, FN_IP1_25_22, + GP_0_14_FN, FN_IP1_21_18, + GP_0_13_FN, FN_IP1_17_15, + GP_0_12_FN, FN_IP1_14_12, + GP_0_11_FN, FN_IP1_11_8, + GP_0_10_FN, FN_IP1_7_4, + GP_0_9_FN, FN_IP1_3_0, + GP_0_8_FN, FN_IP0_30_27, + GP_0_7_FN, FN_IP0_26_23, + GP_0_6_FN, FN_IP0_22_20, + GP_0_5_FN, FN_IP0_19_16, + GP_0_4_FN, FN_IP0_15_12, + GP_0_3_FN, FN_IP0_11_9, + GP_0_2_FN, FN_IP0_8_6, + GP_0_1_FN, FN_IP0_5_3, + GP_0_0_FN, FN_IP0_2_0 } + }, + { PINMUX_CFG_REG("GPSR1", 0xE6060008, 32, 1) { + 0, 0, + 0, 0, + GP_1_29_FN, FN_IP6_13_11, + GP_1_28_FN, FN_IP6_10_9, + GP_1_27_FN, FN_IP6_8_6, + GP_1_26_FN, FN_IP6_5_3, + GP_1_25_FN, FN_IP6_2_0, + GP_1_24_FN, FN_IP5_29_27, + GP_1_23_FN, FN_IP5_26_24, + GP_1_22_FN, FN_IP5_23_21, + GP_1_21_FN, FN_IP5_20_18, + GP_1_20_FN, FN_IP5_17_15, + GP_1_19_FN, FN_IP5_14_13, + GP_1_18_FN, FN_IP5_12_10, + GP_1_17_FN, FN_IP5_9_6, + GP_1_16_FN, FN_IP5_5_3, + GP_1_15_FN, FN_IP5_2_0, + GP_1_14_FN, FN_IP4_29_27, + GP_1_13_FN, FN_IP4_26_24, + GP_1_12_FN, FN_IP4_23_21, + GP_1_11_FN, FN_IP4_20_18, + GP_1_10_FN, FN_IP4_17_15, + GP_1_9_FN, FN_IP4_14_12, + GP_1_8_FN, FN_IP4_11_9, + GP_1_7_FN, FN_IP4_8_6, + GP_1_6_FN, FN_IP4_5_3, + GP_1_5_FN, FN_IP4_2_0, + GP_1_4_FN, FN_IP3_31_29, + GP_1_3_FN, FN_IP3_28_26, + GP_1_2_FN, FN_IP3_25_23, + GP_1_1_FN, FN_IP3_22_20, + GP_1_0_FN, FN_IP3_19_18, } + }, + { PINMUX_CFG_REG("GPSR2", 0xE606000C, 32, 1) { + 0, 0, + 0, 0, + GP_2_29_FN, FN_IP7_15_13, + GP_2_28_FN, FN_IP7_12_10, + GP_2_27_FN, FN_IP7_9_8, + GP_2_26_FN, FN_IP7_7_6, + GP_2_25_FN, FN_IP7_5_3, + GP_2_24_FN, FN_IP7_2_0, + GP_2_23_FN, FN_IP6_31_29, + GP_2_22_FN, FN_IP6_28_26, + GP_2_21_FN, FN_IP6_25_23, + GP_2_20_FN, FN_IP6_22_20, + GP_2_19_FN, FN_IP6_19_17, + GP_2_18_FN, FN_IP6_16_14, + GP_2_17_FN, FN_VI1_DATA7_VI1_B7, + GP_2_16_FN, FN_IP8_27, + GP_2_15_FN, FN_IP8_26, + GP_2_14_FN, FN_IP8_25_24, + GP_2_13_FN, FN_IP8_23_22, + GP_2_12_FN, FN_IP8_21_20, + GP_2_11_FN, FN_IP8_19_18, + GP_2_10_FN, FN_IP8_17_16, + GP_2_9_FN, FN_IP8_15_14, + GP_2_8_FN, FN_IP8_13_12, + GP_2_7_FN, FN_IP8_11_10, + GP_2_6_FN, FN_IP8_9_8, + GP_2_5_FN, FN_IP8_7_6, + GP_2_4_FN, FN_IP8_5_4, + GP_2_3_FN, FN_IP8_3_2, + GP_2_2_FN, FN_IP8_1_0, + GP_2_1_FN, FN_IP7_30_29, + GP_2_0_FN, FN_IP7_28_27 } + }, + { PINMUX_CFG_REG("GPSR3", 0xE6060010, 32, 1) { + GP_3_31_FN, FN_IP11_21_18, + GP_3_30_FN, FN_IP11_17_15, + GP_3_29_FN, FN_IP11_14_13, + GP_3_28_FN, FN_IP11_12_11, + GP_3_27_FN, FN_IP11_10_9, + GP_3_26_FN, FN_IP11_8_7, + GP_3_25_FN, FN_IP11_6_5, + GP_3_24_FN, FN_IP11_4, + GP_3_23_FN, FN_IP11_3_0, + GP_3_22_FN, FN_IP10_29_26, + GP_3_21_FN, FN_IP10_25_23, + GP_3_20_FN, FN_IP10_22_19, + GP_3_19_FN, FN_IP10_18_15, + GP_3_18_FN, FN_IP10_14_11, + GP_3_17_FN, FN_IP10_10_7, + GP_3_16_FN, FN_IP10_6_4, + GP_3_15_FN, FN_IP10_3_0, + GP_3_14_FN, FN_IP9_31_28, + GP_3_13_FN, FN_IP9_27_26, + GP_3_12_FN, FN_IP9_25_24, + GP_3_11_FN, FN_IP9_23_22, + GP_3_10_FN, FN_IP9_21_20, + GP_3_9_FN, FN_IP9_19_18, + GP_3_8_FN, FN_IP9_17_16, + GP_3_7_FN, FN_IP9_15_12, + GP_3_6_FN, FN_IP9_11_8, + GP_3_5_FN, FN_IP9_7_6, + GP_3_4_FN, FN_IP9_5_4, + GP_3_3_FN, FN_IP9_3_2, + GP_3_2_FN, FN_IP9_1_0, + GP_3_1_FN, FN_IP8_30_29, + GP_3_0_FN, FN_IP8_28 } + }, + { PINMUX_CFG_REG("GPSR4", 0xE6060014, 32, 1) { + GP_4_31_FN, FN_IP14_18_16, + GP_4_30_FN, FN_IP14_15_12, + GP_4_29_FN, FN_IP14_11_9, + GP_4_28_FN, FN_IP14_8_6, + GP_4_27_FN, FN_IP14_5_3, + GP_4_26_FN, FN_IP14_2_0, + GP_4_25_FN, FN_IP13_30_29, + GP_4_24_FN, FN_IP13_28_26, + GP_4_23_FN, FN_IP13_25_23, + GP_4_22_FN, FN_IP13_22_19, + GP_4_21_FN, FN_IP13_18_16, + GP_4_20_FN, FN_IP13_15_13, + GP_4_19_FN, FN_IP13_12_10, + GP_4_18_FN, FN_IP13_9_7, + GP_4_17_FN, FN_IP13_6_3, + GP_4_16_FN, FN_IP13_2_0, + GP_4_15_FN, FN_IP12_30_28, + GP_4_14_FN, FN_IP12_27_25, + GP_4_13_FN, FN_IP12_24_23, + GP_4_12_FN, FN_IP12_22_20, + GP_4_11_FN, FN_IP12_19_17, + GP_4_10_FN, FN_IP12_16_14, + GP_4_9_FN, FN_IP12_13_11, + GP_4_8_FN, FN_IP12_10_8, + GP_4_7_FN, FN_IP12_7_6, + GP_4_6_FN, FN_IP12_5_4, + GP_4_5_FN, FN_IP12_3_2, + GP_4_4_FN, FN_IP12_1_0, + GP_4_3_FN, FN_IP11_31_30, + GP_4_2_FN, FN_IP11_29_27, + GP_4_1_FN, FN_IP11_26_24, + GP_4_0_FN, FN_IP11_23_22 } + }, + { PINMUX_CFG_REG("GPSR5", 0xE6060018, 32, 1) { + GP_5_31_FN, FN_IP7_24_22, + GP_5_30_FN, FN_IP7_21_19, + GP_5_29_FN, FN_IP7_18_16, + GP_5_28_FN, FN_DU_DOTCLKIN2, + GP_5_27_FN, FN_IP7_26_25, + GP_5_26_FN, FN_DU_DOTCLKIN0, + GP_5_25_FN, FN_AVS2, + GP_5_24_FN, FN_AVS1, + GP_5_23_FN, FN_USB2_OVC, + GP_5_22_FN, FN_USB2_PWEN, + GP_5_21_FN, FN_IP16_7, + GP_5_20_FN, FN_IP16_6, + GP_5_19_FN, FN_USB0_OVC_VBUS, + GP_5_18_FN, FN_USB0_PWEN, + GP_5_17_FN, FN_IP16_5_3, + GP_5_16_FN, FN_IP16_2_0, + GP_5_15_FN, FN_IP15_29_28, + GP_5_14_FN, FN_IP15_27_26, + GP_5_13_FN, FN_IP15_25_23, + GP_5_12_FN, FN_IP15_22_20, + GP_5_11_FN, FN_IP15_19_18, + GP_5_10_FN, FN_IP15_17_16, + GP_5_9_FN, FN_IP15_15_14, + GP_5_8_FN, FN_IP15_13_12, + GP_5_7_FN, FN_IP15_11_9, + GP_5_6_FN, FN_IP15_8_6, + GP_5_5_FN, FN_IP15_5_3, + GP_5_4_FN, FN_IP15_2_0, + GP_5_3_FN, FN_IP14_30_28, + GP_5_2_FN, FN_IP14_27_25, + GP_5_1_FN, FN_IP14_24_22, + GP_5_0_FN, FN_IP14_21_19 } + }, + { PINMUX_CFG_REG_VAR("IPSR0", 0xE6060020, 32, + 1, 4, 4, 3, 4, 4, 3, 3, 3, 3) { + /* IP0_31 [1] */ + 0, 0, + /* IP0_30_27 [4] */ + FN_D8, FN_SCIFA1_SCK_C, FN_AVB_TXD0, FN_MII_TXD0, + FN_VI0_G0, FN_VI0_G0_B, FN_VI2_DATA0_VI2_B0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, + /* IP0_26_23 [4] */ + FN_D7, FN_AD_DI_B, FN_SDA2_C, + FN_VI3_DATA7, FN_VI0_R3, FN_VI0_R3_B, FN_SDA2_CIS_C, + 0, 0, 0, 0, 0, 0, 0, 0, 0, + /* IP0_22_20 [3] */ + FN_D6, FN_SCL2_C, FN_VI3_DATA6, FN_VI0_R2, FN_VI0_R2_B, + FN_SCL2_CIS_C, 0, 0, + /* IP0_19_16 [4] */ + FN_D5, FN_SCIFB1_TXD_F, FN_SCIFB0_TXD_C, FN_VI3_DATA5, + FN_VI0_R1, FN_VI0_R1_B, FN_TX0_B, + 0, 0, 0, 0, 0, 0, 0, 0, 0, + /* IP0_15_12 [4] */ + FN_D4, FN_SCIFB1_RXD_F, FN_SCIFB0_RXD_C, FN_VI3_DATA4, + FN_VI0_R0, FN_VI0_R0_B, FN_RX0_B, + 0, 0, 0, 0, 0, 0, 0, 0, 0, + /* IP0_11_9 [3] */ + FN_D3, FN_MSIOF3_TXD_B, FN_VI3_DATA3, FN_VI0_G7, FN_VI0_G7_B, + 0, 0, 0, + /* IP0_8_6 [3] */ + FN_D2, FN_MSIOF3_RXD_B, FN_VI3_DATA2, FN_VI0_G6, FN_VI0_G6_B, + 0, 0, 0, + /* IP0_5_3 [3] */ + FN_D1, FN_MSIOF3_SYNC_B, FN_VI3_DATA1, FN_VI0_G5, FN_VI0_G5_B, + 0, 0, 0, + /* IP0_2_0 [3] */ + FN_D0, FN_MSIOF3_SCK_B, FN_VI3_DATA0, FN_VI0_G4, FN_VI0_G4_B, + 0, 0, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR1", 0xE6060024, 32, + 2, 2, 2, 4, 4, 3, 3, 4, 4, 4) {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} + }, + { PINMUX_CFG_REG_VAR("IPSR2", 0xE6060028, 32, + 3, 3, 4, 4, 3, 3, 3, 3, 3, 3) { + /* IP2_31_29 [3] */ + 0, 0, 0, 0, 0, 0, 0, 0, + /* IP2_28_26 [3] */ + FN_A10, FN_SSI_SDATA5_B, FN_MSIOF2_SYNC, FN_VI0_R6, + FN_VI0_R6_B, FN_VI2_DATA2_VI2_B2_B, 0, 0, + /* IP2_25_22 [4] */ + FN_A9, FN_SCIFA1_CTS_N_B, FN_SSI_WS5_B, FN_VI0_R5, + FN_VI0_R5_B, FN_SCIFB2_TXD_C, 0, FN_VI2_DATA1_VI2_B1_B, + 0, 0, 0, 0, 0, 0, 0, 0, + /* IP2_21_18 [4] */ + FN_A8, FN_SCIFA1_RXD_B, FN_SSI_SCK5_B, FN_VI0_R4, + FN_VI0_R4_B, FN_SCIFB2_RXD_C, 0, FN_VI2_DATA0_VI2_B0_B, + 0, 0, 0, 0, 0, 0, 0, 0, + /* IP2_17_15 [3] */ + FN_A7, FN_SCIFA1_SCK_B, FN_AUDIO_CLKOUT_B, FN_TPU0TO3, + 0, 0, 0, 0, + /* IP2_14_12 [3] */ + FN_A6, FN_SCIFA1_RTS_N_B, FN_TPU0TO2, 0, 0, 0, 0, 0, + /* IP2_11_9 [3] */ + FN_A5, FN_SCIFA1_TXD_B, FN_TPU0TO1, 0, 0, 0, 0, 0, + /* IP2_8_6 [3] */ + FN_A4, FN_MSIOF1_TXD_B, FN_TPU0TO0, 0, 0, 0, 0, 0, + /* IP2_5_3 [3] */ + FN_A3, FN_PWM6, FN_MSIOF1_SS2_B, 0, 0, 0, 0, 0, + /* IP2_2_0 [3] */ + FN_A2, FN_PWM5, FN_MSIOF1_SS1_B, 0, 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR3", 0xE606002C, 32, + 3, 3, 3, 3, 2, 3, 3, 4, 4, 4) { + /* IP3_31_29 [3] */ + FN_A20, FN_SPCLK, FN_VI1_R3, FN_VI1_R3_B, FN_VI2_G4, + 0, 0, 0, + /* IP3_28_26 [3] */ + FN_A19, FN_AD_NCS_N_B, FN_ATACS01_N, FN_EX_WAIT0_B, + 0, 0, 0, 0, + /* IP3_25_23 [3] */ + FN_A18, FN_AD_CLK_B, FN_ATAG1_N, 0, 0, 0, 0, 0, + /* IP3_22_20 [3] */ + FN_A17, FN_AD_DO_B, FN_ATADIR1_N, 0, 0, 0, 0, 0, + /* IP3_19_18 [2] */ + FN_A16, FN_ATAWR1_N, 0, 0, + /* IP3_17_15 [3] */ + FN_A15, FN_SCIFB2_SCK_B, FN_ATARD1_N, FN_MSIOF2_SS2, + 0, 0, 0, 0, + /* IP3_14_12 [3] */ + FN_A14, FN_SCIFB2_TXD_B, FN_ATACS11_N, FN_MSIOF2_SS1, + 0, 0, 0, 0, + /* IP3_11_8 [4] */ + FN_A13, FN_SCIFB2_RTS_N_B, FN_EX_WAIT2, + FN_MSIOF2_RXD, FN_VI1_R2, FN_VI1_R2_B, FN_VI2_G2, + FN_VI2_DATA5_VI2_B5_B, 0, 0, 0, 0, 0, 0, 0, 0, + /* IP3_7_4 [4] */ + FN_A12, FN_SCIFB2_RXD_B, FN_MSIOF2_TXD, FN_VI1_R1, + FN_VI1_R1_B, FN_VI2_G1, FN_VI2_DATA4_VI2_B4_B, + 0, 0, 0, 0, 0, 0, 0, 0, 0, + /* IP3_3_0 [4] */ + FN_A11, FN_SCIFB2_CTS_N_B, FN_MSIOF2_SCK, FN_VI1_R0, + FN_VI1_R0_B, FN_VI2_G0, FN_VI2_DATA3_VI2_B3_B, 0, + 0, 0, 0, 0, 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR4", 0xE6060030, 32, + 2, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3) { + /* IP4_31_30 [2] */ + 0, 0, 0, 0, + /* IP4_29_27 [3] */ + FN_EX_CS2_N, FN_GPS_SIGN, FN_HRTS1_N_B, + FN_VI3_CLKENB, FN_VI1_G0, FN_VI1_G0_B, FN_VI2_R2, 0, + /* IP4_26_24 [3] */ + FN_EX_CS1_N, FN_GPS_CLK, FN_HCTS1_N_B, FN_VI1_FIELD, + FN_VI1_FIELD_B, FN_VI2_R1, 0, 0, + /* IP4_23_21 [3] */ + FN_EX_CS0_N, FN_HRX1_B, FN_VI1_G5, FN_VI1_G5_B, FN_VI2_R0, + FN_HTX0_B, FN_MSIOF0_SS1_B, 0, + /* IP4_20_18 [3] */ + FN_CS1_N_A26, FN_SPEEDIN, FN_VI0_R7, FN_VI0_R7_B, + FN_VI2_CLK, FN_VI2_CLK_B, 0, 0, + /* IP4_17_15 [3] */ + FN_CS0_N, FN_VI1_R6, FN_VI1_R6_B, FN_VI2_G3, FN_MSIOF0_SS2_B, + 0, 0, 0, + /* IP4_14_12 [3] */ + FN_A25, FN_SSL, FN_VI1_G6, FN_VI1_G6_B, FN_VI2_FIELD, + FN_VI2_FIELD_B, 0, 0, + /* IP4_11_9 [3] */ + FN_A24, FN_IO3, FN_VI1_R7, FN_VI1_R7_B, FN_VI2_CLKENB, + FN_VI2_CLKENB_B, 0, 0, + /* IP4_8_6 [3] */ + FN_A23, FN_IO2, FN_VI1_G7, FN_VI1_G7_B, FN_VI2_G7, 0, 0, 0, + /* IP4_5_3 [3] */ + FN_A22, FN_MISO_IO1, FN_VI1_R5, FN_VI1_R5_B, FN_VI2_G6, 0, 0, 0, + /* IP4_2_0 [3] */ + FN_A21, FN_MOSI_IO0, FN_VI1_R4, FN_VI1_R4_B, FN_VI2_G5, 0, 0, 0, + } + }, + { PINMUX_CFG_REG_VAR("IPSR5", 0xE6060034, 32, + 2, 3, 3, 3, 3, 3, 2, 3, 4, 3, 3) { + /* IP5_31_30 [2] */ + 0, 0, 0, 0, + /* IP5_29_27 [3] */ + FN_DREQ0_N, FN_VI1_HSYNC_N, FN_VI1_HSYNC_N_B, FN_VI2_R7, + FN_SSI_SCK78_C, FN_SSI_WS78_B, 0, 0, + /* IP5_26_24 [3] */ + FN_EX_WAIT0, FN_IRQ3, FN_INTC_IRQ3_N, + FN_VI3_CLK, FN_SCIFA0_RTS_N_B, FN_HRX0_B, + FN_MSIOF0_SCK_B, 0, + /* IP5_23_21 [3] */ + FN_WE1_N, FN_IERX, FN_CAN1_RX, FN_VI1_G4, + FN_VI1_G4_B, FN_VI2_R6, FN_SCIFA0_CTS_N_B, + FN_IERX_C, 0, + /* IP5_20_18 [3] */ + FN_WE0_N, FN_IECLK, FN_CAN_CLK, + FN_VI2_VSYNC_N, FN_SCIFA0_TXD_B, FN_VI2_VSYNC_N_B, 0, 0, + /* IP5_17_15 [3] */ + FN_RD_WR_N, FN_VI1_G3, FN_VI1_G3_B, FN_VI2_R5, FN_SCIFA0_RXD_B, + FN_INTC_IRQ4_N, 0, 0, + /* IP5_14_13 [2] */ + FN_RD_N, FN_CAN0_TX, FN_SCIFA0_SCK_B, 0, + /* IP5_12_10 [3] */ + FN_BS_N, FN_IETX, FN_HTX1_B, FN_CAN1_TX, FN_DRACK0, FN_IETX_C, + 0, 0, + /* IP5_9_6 [4] */ + FN_EX_CS5_N, FN_CAN0_RX, FN_MSIOF1_RXD_B, FN_VI3_VSYNC_N, + FN_VI1_G2, FN_VI1_G2_B, FN_VI2_R4, FN_SDA1, FN_INTC_EN1_N, + FN_SDA1_CIS, 0, 0, 0, 0, 0, 0, + /* IP5_5_3 [3] */ + FN_EX_CS4_N, FN_MSIOF1_SCK_B, FN_VI3_HSYNC_N, + FN_VI2_HSYNC_N, FN_SCL1, FN_VI2_HSYNC_N_B, + FN_INTC_EN0_N, FN_SCL1_CIS, + /* IP5_2_0 [3] */ + FN_EX_CS3_N, FN_GPS_MAG, FN_VI3_FIELD, FN_VI1_G1, FN_VI1_G1_B, + FN_VI2_R3, 0, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR6", 0xE6060038, 32, + 3, 3, 3, 3, 3, 3, 3, 2, 3, 3, 3) { + /* IP6_31_29 [3] */ + FN_ETH_REF_CLK, FN_RMII_REF_CLK, FN_HCTS0_N_E, + FN_STP_IVCXO27_1_B, FN_HRX0_F, 0, 0, 0, + /* IP6_28_26 [3] */ + FN_ETH_LINK, FN_RMII_LINK, FN_HTX0_E, + FN_STP_IVCXO27_0_B, FN_SCIFB1_TXD_G, FN_TX1_E, 0, 0, + /* IP6_25_23 [3] */ + FN_ETH_RXD1, FN_RMII_RXD1, FN_HRX0_E, FN_STP_ISSYNC_0_B, + FN_TS_SCK0_D, FN_GLO_I1_C, FN_SCIFB1_RXD_G, FN_RX1_E, + /* IP6_22_20 [3] */ + FN_ETH_RXD0, FN_RMII_RXD0, FN_STP_ISEN_0_B, FN_TS_SDAT0_D, + FN_GLO_I0_C, FN_SCIFB1_SCK_G, FN_SCK1_E, 0, + /* IP6_19_17 [3] */ + FN_ETH_RX_ER, FN_RMII_RX_ER, FN_STP_ISD_0_B, + FN_TS_SPSYNC0_D, FN_GLO_Q1_C, FN_SDA2_E, FN_SDA2_CIS_E, 0, + /* IP6_16_14 [3] */ + FN_ETH_CRS_DV, FN_RMII_CRS_DV, FN_STP_ISCLK_0_B, + FN_TS_SDEN0_D, FN_GLO_Q0_C, FN_SCL2_E, + FN_SCL2_CIS_E, 0, + /* IP6_13_11 [3] */ + FN_DACK2, FN_IRQ2, FN_INTC_IRQ2_N, + FN_SSI_SDATA6_B, FN_HRTS0_N_B, FN_MSIOF0_RXD_B, 0, 0, + /* IP6_10_9 [2] */ + FN_DREQ2_N, FN_HSCK1_B, FN_HCTS0_N_B, FN_MSIOF0_TXD_B, + /* IP6_8_6 [3] */ + FN_DACK1, FN_IRQ1, FN_INTC_IRQ1_N, FN_SSI_WS6_B, + FN_SSI_SDATA8_C, 0, 0, 0, + /* IP6_5_3 [3] */ + FN_DREQ1_N, FN_VI1_CLKENB, FN_VI1_CLKENB_B, + FN_SSI_SDATA7_C, FN_SSI_SCK78_B, 0, 0, 0, + /* IP6_2_0 [3] */ + FN_DACK0, FN_IRQ0, FN_INTC_IRQ0_N, FN_SSI_SCK6_B, + FN_VI1_VSYNC_N, FN_VI1_VSYNC_N_B, FN_SSI_WS78_C, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR7", 0xE606003C, 32, + 1, 2, 2, 2, 3, 3, 3, 3, 3, 2, 2, 3, 3) { + /* IP7_31 [1] */ + 0, 0, + /* IP7_30_29 [2] */ + FN_VI0_DATA0_VI0_B0, FN_ATACS10_N, FN_AVB_RXD2, + FN_MII_RXD2, + /* IP7_28_27 [2] */ + FN_VI0_CLK, FN_ATACS00_N, FN_AVB_RXD1, FN_MII_RXD1, + /* IP7_26_25 [2] */ + FN_DU1_DOTCLKIN, FN_AUDIO_CLKC, FN_AUDIO_CLKOUT_C, 0, + /* IP7_24_22 [3] */ + FN_PWM2, FN_PWMFSW0, FN_SCIFA2_RXD_C, FN_PCMWE_N, FN_IECLK_C, + 0, 0, 0, + /* IP7_21_19 [3] */ + FN_PWM1, FN_SCIFA2_TXD_C, FN_STP_ISSYNC_1_B, FN_TS_SCK1_C, + FN_GLO_RFON_C, FN_PCMOE_N, 0, 0, + /* IP7_18_16 [3] */ + FN_PWM0, FN_SCIFA2_SCK_C, FN_STP_ISEN_1_B, FN_TS_SDAT1_C, + FN_GLO_SS_C, 0, 0, 0, + /* IP7_15_13 [3] */ + FN_ETH_MDC, FN_RMII_MDC, FN_STP_ISD_1_B, + FN_TS_SPSYNC1_C, FN_GLO_SDATA_C, 0, 0, 0, + /* IP7_12_10 [3] */ + FN_ETH_TXD0, FN_RMII_TXD0, FN_STP_ISCLK_1_B, FN_TS_SDEN1_C, + FN_GLO_SCLK_C, 0, 0, 0, + /* IP7_9_8 [2] */ + FN_ETH_MAGIC, FN_RMII_MAGIC, FN_SIM0_RST_C, 0, + /* IP7_7_6 [2] */ + FN_ETH_TX_EN, FN_RMII_TX_EN, FN_SIM0_CLK_C, FN_HRTS0_N_F, + /* IP7_5_3 [3] */ + FN_ETH_TXD1, FN_RMII_TXD1, FN_HTX0_F, FN_BPFCLK_G, FN_RDS_CLK_F, + 0, 0, 0, + /* IP7_2_0 [3] */ + FN_ETH_MDIO, FN_RMII_MDIO, FN_HRTS0_N_E, + FN_SIM0_D_C, FN_HCTS0_N_F, 0, 0, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR8", 0xE6060040, 32, + 1, 2, 1, 1, 1, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2) { + /* IP8_31 [1] */ + 0, 0, + /* IP8_30_29 [2] */ + FN_SD0_CMD, FN_SCIFB1_SCK_B, FN_VI1_DATA1_VI1_B1_B, 0, + /* IP8_28 [1] */ + FN_SD0_CLK, FN_VI1_DATA0_VI1_B0_B, + /* IP8_27 [1] */ + FN_VI1_DATA6_VI1_B6, FN_AVB_GTXREFCLK, + /* IP8_26 [1] */ + FN_VI1_DATA5_VI1_B5, FN_AVB_PHY_INT, + /* IP8_25_24 [2] */ + FN_VI1_DATA4_VI1_B4, FN_SCIFA1_RTS_N_D, + FN_AVB_MAGIC, FN_MII_MAGIC, + /* IP8_23_22 [2] */ + FN_VI1_DATA3_VI1_B3, FN_SCIFA1_CTS_N_D, FN_AVB_GTX_CLK, 0, + /* IP8_21_20 [2] */ + FN_VI1_DATA2_VI1_B2, FN_SCIFA1_TXD_D, FN_AVB_MDIO, + FN_MII_MDIO, + /* IP8_19_18 [2] */ + FN_VI1_DATA1_VI1_B1, FN_SCIFA1_RXD_D, FN_AVB_MDC, FN_MII_MDC, + /* IP8_17_16 [2] */ + FN_VI1_DATA0_VI1_B0, FN_SCIFA1_SCK_D, FN_AVB_CRS, FN_MII_CRS, + /* IP8_15_14 [2] */ + FN_VI1_CLK, FN_AVB_RX_DV, FN_MII_RX_DV, 0, + /* IP8_13_12 [2] */ + FN_VI0_DATA7_VI0_B7, FN_AVB_RX_CLK, FN_MII_RX_CLK, 0, + /* IP8_11_10 [2] */ + FN_VI0_DATA6_VI0_B6, FN_AVB_RX_ER, FN_MII_RX_ER, 0, + /* IP8_9_8 [2] */ + FN_VI0_DATA5_VI0_B5, FN_EX_WAIT1, FN_AVB_RXD7, 0, + /* IP8_7_6 [2] */ + FN_VI0_DATA4_VI0_B4, FN_ATAG0_N, FN_AVB_RXD6, 0, + /* IP8_5_4 [2] */ + FN_VI0_DATA3_VI0_B3, FN_ATADIR0_N, FN_AVB_RXD5, 0, + /* IP8_3_2 [2] */ + FN_VI0_DATA2_VI0_B2, FN_ATAWR0_N, FN_AVB_RXD4, 0, + /* IP8_1_0 [2] */ + FN_VI0_DATA1_VI0_B1, FN_ATARD0_N, FN_AVB_RXD3, FN_MII_RXD3, } + }, + { PINMUX_CFG_REG_VAR("IPSR9", 0xE6060044, 32, + 4, 2, 2, 2, 2, 2, 2, 4, 4, 2, 2, 2, 2) { + /* IP9_31_28 [4] */ + FN_SD1_CD, FN_MMC1_D6, FN_TS_SDEN1, FN_USB1_EXTP, + FN_GLO_SS, FN_VI0_CLK_B, FN_SCL2_D, FN_SCL2_CIS_D, + FN_SIM0_CLK_B, FN_VI3_CLK_B, 0, 0, 0, 0, 0, 0, + /* IP9_27_26 [2] */ + FN_SD1_DAT3, FN_AVB_RXD0, FN_MII_RXD0, FN_SCIFB0_RTS_N_B, + /* IP9_25_24 [2] */ + FN_SD1_DAT2, FN_AVB_COL, FN_MII_COL, FN_SCIFB0_CTS_N_B, + /* IP9_23_22 [2] */ + FN_SD1_DAT1, FN_AVB_LINK, FN_MII_LINK, FN_SCIFB0_TXD_B, + /* IP9_21_20 [2] */ + FN_SD1_DAT0, FN_AVB_TX_CLK, FN_MII_TX_CLK, FN_SCIFB0_RXD_B, + /* IP9_19_18 [2] */ + FN_SD1_CMD, FN_AVB_TX_ER, FN_MII_TX_ER, FN_SCIFB0_SCK_B, + /* IP9_17_16 [2] */ + FN_SD1_CLK, FN_AVB_TX_EN, FN_MII_TX_EN, 0, + /* IP9_15_12 [4] */ + FN_SD0_WP, FN_MMC0_D7, FN_TS_SPSYNC0_B, FN_USB0_IDIN, + FN_GLO_SDATA, FN_VI1_DATA7_VI1_B7_B, FN_SDA1_B, + FN_SDA1_CIS_B, FN_VI2_DATA7_VI2_B7_B, 0, 0, 0, 0, 0, 0, 0, + /* IP9_11_8 [4] */ + FN_SD0_CD, FN_MMC0_D6, FN_TS_SDEN0_B, FN_USB0_EXTP, + FN_GLO_SCLK, FN_VI1_DATA6_VI1_B6_B, FN_SCL1_B, + FN_SCL1_CIS_B, FN_VI2_DATA6_VI2_B6_B, 0, 0, 0, 0, 0, 0, 0, + /* IP9_7_6 [2] */ + FN_SD0_DAT3, FN_SCIFB1_RTS_N_B, FN_VI1_DATA5_VI1_B5_B, 0, + /* IP9_5_4 [2] */ + FN_SD0_DAT2, FN_SCIFB1_CTS_N_B, FN_VI1_DATA4_VI1_B4_B, 0, + /* IP9_3_2 [2] */ + FN_SD0_DAT1, FN_SCIFB1_TXD_B, FN_VI1_DATA3_VI1_B3_B, 0, + /* IP9_1_0 [2] */ + FN_SD0_DAT0, FN_SCIFB1_RXD_B, FN_VI1_DATA2_VI1_B2_B, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR10", 0xE6060048, 32, + 2, 4, 3, 4, 4, 4, 4, 3, 4) { + /* IP10_31_30 [2] */ + 0, 0, 0, 0, + /* IP10_29_26 [4] */ + FN_SD2_CD, FN_MMC0_D4, FN_TS_SDAT0_B, FN_USB2_EXTP, FN_GLO_I0, + FN_VI0_DATA6_VI0_B6_B, FN_HCTS0_N_D, FN_TS_SDAT1_B, + FN_GLO_I0_B, FN_VI3_DATA6_B, 0, 0, 0, 0, 0, 0, + /* IP10_25_23 [3] */ + FN_SD2_DAT3, FN_MMC0_D3, FN_SIM0_RST, FN_VI0_DATA5_VI0_B5_B, + FN_HTX0_D, FN_TS_SPSYNC1_B, FN_GLO_Q1_B, FN_VI3_DATA5_B, + /* IP10_22_19 [4] */ + FN_SD2_DAT2, FN_MMC0_D2, FN_BPFCLK_B, FN_RDS_CLK, + FN_VI0_DATA4_VI0_B4_B, FN_HRX0_D, FN_TS_SDEN1_B, + FN_GLO_Q0_B, FN_VI3_DATA4_B, 0, 0, 0, 0, 0, 0, 0, + /* IP10_18_15 [4] */ + FN_SD2_DAT1, FN_MMC0_D1, FN_FMIN_B, FN_RDS_DATA, + FN_VI0_DATA3_VI0_B3_B, FN_SCIFB1_TXD_E, FN_TX1_D, + FN_TS_SCK0_C, FN_GLO_RFON_B, FN_VI3_DATA3_B, + 0, 0, 0, 0, 0, 0, + /* IP10_14_11 [4] */ + FN_SD2_DAT0, FN_MMC0_D0, FN_FMCLK_B, + FN_VI0_DATA2_VI0_B2_B, FN_SCIFB1_RXD_E, FN_RX1_D, + FN_TS_SDAT0_C, FN_GLO_SS_B, FN_VI3_DATA2_B, + 0, 0, 0, 0, 0, 0, 0, + /* IP10_10_7 [4] */ + FN_SD2_CMD, FN_MMC0_CMD, FN_SIM0_D, + FN_VI0_DATA1_VI0_B1_B, FN_SCIFB1_SCK_E, FN_SCK1_D, + FN_TS_SPSYNC0_C, FN_GLO_SDATA_B, FN_VI3_DATA1_B, + 0, 0, 0, 0, 0, 0, 0, + /* IP10_6_4 [3] */ + FN_SD2_CLK, FN_MMC0_CLK, FN_SIM0_CLK, + FN_VI0_DATA0_VI0_B0_B, FN_TS_SDEN0_C, FN_GLO_SCLK_B, + FN_VI3_DATA0_B, 0, + /* IP10_3_0 [4] */ + FN_SD1_WP, FN_MMC1_D7, FN_TS_SPSYNC1, FN_USB1_IDIN, + FN_GLO_RFON, FN_VI1_CLK_B, FN_SDA2_D, FN_SDA2_CIS_D, + FN_SIM0_D_B, 0, 0, 0, 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR11", 0xE606004C, 32, + 2, 3, 3, 2, 4, 3, 2, 2, 2, 2, 2, 1, 4) { + /* IP11_31_30 [2] */ + FN_SSI_SCK0129, FN_CAN_CLK_B, FN_MOUT0, 0, + /* IP11_29_27 [3] */ + FN_MLB_DAT, FN_SPV_EVEN, FN_SCIFB1_TXD_D, FN_TX1_C, FN_BPFCLK_C, + FN_RDS_CLK_B, 0, 0, + /* IP11_26_24 [3] */ + FN_MLB_SIG, FN_SCIFB1_RXD_D, FN_RX1_C, FN_SDA2_B, FN_SDA2_CIS_B, + 0, 0, 0, + /* IP11_23_22 [2] */ + FN_MLB_CLK, FN_SCL2_B, FN_SCL2_CIS_B, 0, + /* IP11_21_18 [4] */ + FN_SD3_WP, FN_MMC1_D5, FN_TS_SCK1, FN_GLO_Q1, FN_FMIN_C, + FN_RDS_DATA_B, FN_FMIN_E, FN_RDS_DATA_D, FN_FMIN_F, + FN_RDS_DATA_E, 0, 0, 0, 0, 0, 0, + /* IP11_17_15 [3] */ + FN_SD3_CD, FN_MMC1_D4, FN_TS_SDAT1, + FN_VSP, FN_GLO_Q0, FN_SIM0_RST_B, 0, 0, + /* IP11_14_13 [2] */ + FN_SD3_DAT3, FN_MMC1_D3, FN_SCKZ, 0, + /* IP11_12_11 [2] */ + FN_SD3_DAT2, FN_MMC1_D2, FN_SDATA, 0, + /* IP11_10_9 [2] */ + FN_SD3_DAT1, FN_MMC1_D1, FN_MDATA, 0, + /* IP11_8_7 [2] */ + FN_SD3_DAT0, FN_MMC1_D0, FN_STM_N, 0, + /* IP11_6_5 [2] */ + FN_SD3_CMD, FN_MMC1_CMD, FN_MTS_N, 0, + /* IP11_4 [1] */ + FN_SD3_CLK, FN_MMC1_CLK, + /* IP11_3_0 [4] */ + FN_SD2_WP, FN_MMC0_D5, FN_TS_SCK0_B, FN_USB2_IDIN, + FN_GLO_I1, FN_VI0_DATA7_VI0_B7_B, FN_HRTS0_N_D, + FN_TS_SCK1_B, FN_GLO_I1_B, FN_VI3_DATA7_B, 0, 0, 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR12", 0xE6060050, 32, + 1, 3, 3, 2, 3, 3, 3, 3, 3, 2, 2, 2, 2) { + /* IP12_31 [1] */ + 0, 0, + /* IP12_30_28 [3] */ + FN_SSI_WS5, FN_SCIFB1_RXD, FN_IECLK_B, + FN_DU2_EXVSYNC_DU2_VSYNC, FN_QSTB_QHE, + FN_CAN_DEBUGOUT4, 0, 0, + /* IP12_27_25 [3] */ + FN_SSI_SCK5, FN_SCIFB1_SCK, + FN_IERX_B, FN_DU2_EXHSYNC_DU2_HSYNC, FN_QSTH_QHS, + FN_CAN_DEBUGOUT3, 0, 0, + /* IP12_24_23 [2] */ + FN_SSI_SDATA4, FN_STP_ISSYNC_0, FN_MSIOF1_RXD, + FN_CAN_DEBUGOUT2, + /* IP12_22_20 [3] */ + FN_SSI_WS4, FN_STP_ISEN_0, FN_SCIFB0_RTS_N, + FN_MSIOF1_TXD, FN_SSI_WS5_C, FN_CAN_DEBUGOUT1, 0, 0, + /* IP12_19_17 [3] */ + FN_SSI_SCK4, FN_STP_ISD_0, FN_SCIFB0_CTS_N, + FN_MSIOF1_SS2, FN_SSI_SCK5_C, FN_CAN_DEBUGOUT0, 0, 0, + /* IP12_16_14 [3] */ + FN_SSI_SDATA3, FN_STP_ISCLK_0, + FN_SCIFB0_TXD, FN_MSIOF1_SS1, FN_CAN_TXCLK, 0, 0, 0, + /* IP12_13_11 [3] */ + FN_SSI_WS34, FN_STP_IVCXO27_0, FN_SCIFB0_RXD, FN_MSIOF1_SYNC, + FN_CAN_STEP0, 0, 0, 0, + /* IP12_10_8 [3] */ + FN_SSI_SCK34, FN_STP_OPWM_0, FN_SCIFB0_SCK, + FN_MSIOF1_SCK, FN_CAN_DEBUG_HW_TRIGGER, 0, 0, 0, + /* IP12_7_6 [2] */ + FN_SSI_SDATA2, FN_CAN1_RX_B, FN_SSI_SCK1, FN_MOUT6, + /* IP12_5_4 [2] */ + FN_SSI_SDATA1, FN_CAN1_TX_B, FN_MOUT5, 0, + /* IP12_3_2 [2] */ + FN_SSI_SDATA0, FN_CAN0_RX_B, FN_MOUT2, 0, + /* IP12_1_0 [2] */ + FN_SSI_WS0129, FN_CAN0_TX_B, FN_MOUT1, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR13", 0xE6060054, 32, + 1, 2, 3, 3, 4, 3, 3, 3, 3, 4, 3) { + /* IP13_31 [1] */ + 0, 0, + /* IP13_30_29 [2] */ + FN_AUDIO_CLKA, FN_SCIFB2_RTS_N, FN_CAN_DEBUGOUT14, 0, + /* IP13_28_26 [3] */ + FN_SSI_SDATA9, FN_STP_ISSYNC_1, FN_SCIFB2_CTS_N, FN_SSI_WS1, + FN_SSI_SDATA5_C, FN_CAN_DEBUGOUT13, 0, 0, + /* IP13_25_23 [3] */ + FN_SSI_SDATA8, FN_STP_ISEN_1, FN_SCIFB2_TXD, FN_CAN0_TX_C, + FN_CAN_DEBUGOUT12, FN_SSI_SDATA8_B, 0, 0, + /* IP13_22_19 [4] */ + FN_SSI_SDATA7, FN_STP_ISD_1, FN_SCIFB2_RXD, FN_SCIFA2_RTS_N, + FN_TCLK2, FN_QSTVA_QVS, FN_CAN_DEBUGOUT11, FN_BPFCLK_E, + FN_RDS_CLK_D, FN_SSI_SDATA7_B, FN_FMIN_G, FN_RDS_DATA_F, + 0, 0, 0, 0, + /* IP13_18_16 [3] */ + FN_SSI_WS78, FN_STP_ISCLK_1, FN_SCIFB2_SCK, FN_SCIFA2_CTS_N, + FN_DU2_DR7, FN_LCDOUT7, FN_CAN_DEBUGOUT10, 0, + /* IP13_15_13 [3] */ + FN_SSI_SCK78, FN_STP_IVCXO27_1, FN_SCK1, FN_SCIFA1_SCK, + FN_DU2_DR6, FN_LCDOUT6, FN_CAN_DEBUGOUT9, 0, + /* IP13_12_10 [3] */ + FN_SSI_SDATA6, FN_FMIN_D, FN_RDS_DATA_C, FN_DU2_DR5, FN_LCDOUT5, + FN_CAN_DEBUGOUT8, 0, 0, + /* IP13_9_7 [3] */ + FN_SSI_WS6, FN_SCIFB1_RTS_N, FN_CAN0_TX_D, FN_DU2_DR4, + FN_LCDOUT4, FN_CAN_DEBUGOUT7, 0, 0, + /* IP13_6_3 [4] */ + FN_SSI_SCK6, FN_SCIFB1_CTS_N, FN_BPFCLK_D, FN_RDS_CLK_C, + FN_DU2_DR3, FN_LCDOUT3, FN_CAN_DEBUGOUT6, + FN_BPFCLK_F, FN_RDS_CLK_E, 0, 0, 0, 0, 0, 0, 0, + /* IP13_2_0 [3] */ + FN_SSI_SDATA5, FN_SCIFB1_TXD, FN_IETX_B, FN_DU2_DR2, + FN_LCDOUT2, FN_CAN_DEBUGOUT5, 0, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR14", 0xE6060058, 32, + 1, 3, 3, 3, 3, 3, 4, 3, 3, 3, 3) { + /* IP14_30 [1] */ + 0, 0, + /* IP14_30_28 [3] */ + FN_SCIFA1_RTS_N, FN_AD_NCS_N, FN_RTS1_N_TANS, + FN_MSIOF3_TXD, FN_DU1_DOTCLKOUT, FN_QSTVB_QVE, + FN_HRTS0_N_C, 0, + /* IP14_27_25 [3] */ + FN_SCIFA1_CTS_N, FN_AD_CLK, FN_CTS1_N, FN_MSIOF3_RXD, + FN_DU0_DOTCLKOUT, FN_QCLK, 0, 0, + /* IP14_24_22 [3] */ + FN_SCIFA1_TXD, FN_AD_DO, FN_TX1, FN_DU2_DG1, + FN_LCDOUT9, 0, 0, 0, + /* IP14_21_19 [3] */ + FN_SCIFA1_RXD, FN_AD_DI, FN_RX1, + FN_DU2_EXODDF_DU2_ODDF_DISP_CDE, FN_QCPV_QDE, 0, 0, 0, + /* IP14_18_16 [3] */ + FN_SCIFA0_RTS_N, FN_HRTS1_N, FN_RTS0_N_TANS, + FN_MSIOF3_SS1, FN_DU2_DG0, FN_LCDOUT8, FN_PWM1_B, 0, + /* IP14_15_12 [4] */ + FN_SCIFA0_CTS_N, FN_HCTS1_N, FN_CTS0_N, FN_MSIOF3_SYNC, + FN_DU2_DG3, FN_LCDOUT11, FN_PWM0_B, FN_SCL1_C, FN_SCL1_CIS_C, + 0, 0, 0, 0, 0, 0, 0, + /* IP14_11_9 [3] */ + FN_SCIFA0_TXD, FN_HTX1, FN_TX0, FN_DU2_DR1, FN_LCDOUT1, + 0, 0, 0, + /* IP14_8_6 [3] */ + FN_SCIFA0_RXD, FN_HRX1, FN_RX0, FN_DU2_DR0, FN_LCDOUT0, + 0, 0, 0, + /* IP14_5_3 [3] */ + FN_SCIFA0_SCK, FN_HSCK1, FN_SCK0, FN_MSIOF3_SS2, FN_DU2_DG2, + FN_LCDOUT10, FN_SDA1_C, FN_SDA1_CIS_C, + /* IP14_2_0 [3] */ + FN_AUDIO_CLKB, FN_SCIF_CLK, FN_CAN0_RX_D, + FN_DVC_MUTE, FN_CAN0_RX_C, FN_CAN_DEBUGOUT15, + FN_REMOCON, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR15", 0xE606005C, 32, + 2, 2, 2, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3) { + /* IP15_31_30 [2] */ + 0, 0, 0, 0, + /* IP15_29_28 [2] */ + FN_MSIOF0_TXD, FN_ADICHS1, FN_DU2_DG6, FN_LCDOUT14, + /* IP15_27_26 [2] */ + FN_MSIOF0_SS1, FN_ADICHS0, FN_DU2_DG5, FN_LCDOUT13, + /* IP15_25_23 [3] */ + FN_MSIOF0_SYNC, FN_TS_SCK0, FN_SSI_SCK2, FN_ADIDATA, + FN_DU2_DB7, FN_LCDOUT23, FN_SCIFA2_RXD_B, 0, + /* IP15_22_20 [3] */ + FN_MSIOF0_SCK, FN_TS_SDAT0, FN_ADICLK, + FN_DU2_DB6, FN_LCDOUT22, 0, 0, 0, + /* IP15_19_18 [2] */ + FN_HRTS0_N, FN_SSI_WS9, FN_DU2_DB5, FN_LCDOUT21, + /* IP15_17_16 [2] */ + FN_HCTS0_N, FN_SSI_SCK9, FN_DU2_DB4, FN_LCDOUT20, + /* IP15_15_14 [2] */ + FN_HTX0, FN_DU2_DB3, FN_LCDOUT19, 0, + /* IP15_13_12 [2] */ + FN_HRX0, FN_DU2_DB2, FN_LCDOUT18, 0, + /* IP15_11_9 [3] */ + FN_HSCK0, FN_TS_SDEN0, FN_DU2_DG4, FN_LCDOUT12, FN_HCTS0_N_C, + 0, 0, 0, + /* IP15_8_6 [3] */ + FN_SCIFA2_TXD, FN_BPFCLK, 0, FN_DU2_DB1, FN_LCDOUT17, + FN_SDA2, FN_SDA2_CIS, 0, + /* IP15_5_3 [3] */ + FN_SCIFA2_RXD, FN_FMIN, 0, FN_DU2_DB0, FN_LCDOUT16, + FN_SCL2, FN_SCL2_CIS, 0, + /* IP15_2_0 [3] */ + FN_SCIFA2_SCK, FN_FMCLK, 0, FN_MSIOF3_SCK, FN_DU2_DG7, + FN_LCDOUT15, FN_SCIF_CLK_B, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR16", 0xE6060160, 32, + 4, 4, 4, 4, 4, 4, 1, 1, 3, 3) { + /* IP16_31_28 [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* IP16_27_24 [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* IP16_23_20 [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* IP16_19_16 [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* IP16_15_12 [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* IP16_11_8 [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* IP16_7 [1] */ + FN_USB1_OVC, FN_TCLK1_B, + /* IP16_6 [1] */ + FN_USB1_PWEN, FN_AUDIO_CLKOUT_D, + /* IP16_5_3 [3] */ + FN_MSIOF0_RXD, FN_TS_SPSYNC0, FN_SSI_WS2, + FN_ADICS_SAMP, FN_DU2_CDE, FN_QPOLB, FN_HRX0_C, 0, + /* IP16_2_0 [3] */ + FN_MSIOF0_SS2, FN_AUDIO_CLKOUT, FN_ADICHS2, + FN_DU2_DISP, FN_QPOLA, FN_HTX0_C, FN_SCIFA2_TXD_B, 0, } + }, + { PINMUX_CFG_REG_VAR("MOD_SEL", 0xE6060090, 32, + 3, 2, 2, 3, 2, 1, 1, 1, 2, 1, + 2, 1, 1, 1, 1, 2, 1, 1, 2, 1, 1) { + /* SEL_SCIF1 [3] */ + FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3, + FN_SEL_SCIF1_4, 0, 0, 0, + /* SEL_SCIFB [2] */ + FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2, 0, + /* SEL_SCIFB2 [2] */ + FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1, FN_SEL_SCIFB2_2, 0, + /* SEL_SCIFB1 [3] */ + FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1, FN_SEL_SCIFB1_2, + FN_SEL_SCIFB1_3, FN_SEL_SCIFB1_4, FN_SEL_SCIFB1_5, + FN_SEL_SCIFB1_6, 0, + /* SEL_SCIFA1 [2] */ + FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2, + FN_SEL_SCIFA1_3, + /* SEL_SCIF0 [1] */ + FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, + /* SEL_SCIFA [1] */ + FN_SEL_SCFA_0, FN_SEL_SCFA_1, + /* SEL_SOF1 [1] */ + FN_SEL_SOF1_0, FN_SEL_SOF1_1, + /* SEL_SSI7 [2] */ + FN_SEL_SSI7_0, FN_SEL_SSI7_1, FN_SEL_SSI7_2, 0, + /* SEL_SSI6 [1] */ + FN_SEL_SSI6_0, FN_SEL_SSI6_1, + /* SEL_SSI5 [2] */ + FN_SEL_SSI5_0, FN_SEL_SSI5_1, FN_SEL_SSI5_2, 0, + /* SEL_VI3 [1] */ + FN_SEL_VI3_0, FN_SEL_VI3_1, + /* SEL_VI2 [1] */ + FN_SEL_VI2_0, FN_SEL_VI2_1, + /* SEL_VI1 [1] */ + FN_SEL_VI1_0, FN_SEL_VI1_1, + /* SEL_VI0 [1] */ + FN_SEL_VI0_0, FN_SEL_VI0_1, + /* SEL_TSIF1 [2] */ + FN_SEL_TSIF1_0, FN_SEL_TSIF1_1, FN_SEL_TSIF1_2, 0, + /* RESERVED [1] */ + 0, 0, + /* SEL_LBS [1] */ + FN_SEL_LBS_0, FN_SEL_LBS_1, + /* SEL_TSIF0 [2] */ + FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3, + /* SEL_SOF3 [1] */ + FN_SEL_SOF3_0, FN_SEL_SOF3_1, + /* SEL_SOF0 [1] */ + FN_SEL_SOF0_0, FN_SEL_SOF0_1, } + }, + { PINMUX_CFG_REG_VAR("MOD_SEL2", 0xE6060094, 32, + 3, 1, 1, 1, 2, 1, 2, 1, 2, + 1, 1, 1, 3, 3, 2, 3, 2, 2) { + /* RESERVED [3] */ + 0, 0, 0, 0, 0, 0, 0, 0, + /* SEL_TMU1 [1] */ + FN_SEL_TMU1_0, FN_SEL_TMU1_1, + /* SEL_HSCIF1 [1] */ + FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, + /* SEL_SCIFCLK [1] */ + FN_SEL_SCIFCLK_0, FN_SEL_SCIFCLK_1, + /* SEL_CAN0 [2] */ + FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3, + /* SEL_CANCLK [1] */ + FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, + /* SEL_SCIFA2 [2] */ + FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1, FN_SEL_SCIFA2_2, 0, + /* SEL_CAN1 [1] */ + FN_SEL_CAN1_0, FN_SEL_CAN1_1, + /* RESERVED [2] */ + 0, 0, 0, 0, + /* RESERVED [1] (actually TX2, RX2 vs. TX2_B, RX2_B of SCIF2) */ + 0, 0, + /* SEL_ADI [1] */ + FN_SEL_ADI_0, FN_SEL_ADI_1, + /* SEL_SSP [1] */ + FN_SEL_SSP_0, FN_SEL_SSP_1, + /* SEL_FM [3] */ + FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2, FN_SEL_FM_3, + FN_SEL_FM_4, FN_SEL_FM_5, FN_SEL_FM_6, 0, + /* SEL_HSCIF0 [3] */ + FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2, + FN_SEL_HSCIF0_3, FN_SEL_HSCIF0_4, FN_SEL_HSCIF0_5, 0, 0, + /* SEL_GPS [2] */ + FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, 0, + /* SEL_RDS [3] */ + FN_SEL_RDS_0, FN_SEL_RDS_1, FN_SEL_RDS_2, + FN_SEL_RDS_3, FN_SEL_RDS_4, FN_SEL_RDS_5, 0, 0, + /* SEL_SIM [2] */ + FN_SEL_SIM_0, FN_SEL_SIM_1, FN_SEL_SIM_2, 0, + /* SEL_SSI8 [2] */ + FN_SEL_SSI8_0, FN_SEL_SSI8_1, FN_SEL_SSI8_2, 0, } + }, + { PINMUX_CFG_REG_VAR("MOD_SEL3", 0xE6060098, 32, + 1, 1, 2, 4, 4, 2, 2, + 4, 2, 3, 2, 3, 2) { + /* SEL_IICDVFS [1] */ + FN_SEL_IICDVFS_0, FN_SEL_IICDVFS_1, + /* SEL_IIC0 [1] */ + FN_SEL_IIC0_0, FN_SEL_IIC0_1, + /* RESERVED [2] */ + 0, 0, 0, 0, + /* RESERVED [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* RESERVED [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* RESERVED [2] */ + 0, 0, 0, 0, + /* SEL_IEB [2] */ + FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2, 0, + /* RESERVED [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* RESERVED [2] */ + 0, 0, 0, 0, + /* SEL_IIC2 [3] */ + FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3, + FN_SEL_IIC2_4, 0, 0, 0, + /* SEL_IIC1 [2] */ + FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2, 0, + /* SEL_I2C2 [3] */ + FN_SEL_I2C2_0, FN_SEL_I2C2_1, FN_SEL_I2C2_2, FN_SEL_I2C2_3, + FN_SEL_I2C2_4, 0, 0, 0, + /* SEL_I2C1 [2] */ + FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2, 0, } + }, + { }, +}; + +const struct sh_pfc_soc_info r8a7790_pinmux_info = { + .name = "r8a77900_pfc", + .unlock_reg = 0xe6060000, /* PMMR */ + + .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, + + .pins = pinmux_pins, + .nr_pins = ARRAY_SIZE(pinmux_pins), + .groups = pinmux_groups, + .nr_groups = ARRAY_SIZE(pinmux_groups), + .functions = pinmux_functions, + .nr_functions = ARRAY_SIZE(pinmux_functions), + + .cfg_regs = pinmux_config_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), +}; diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7372.c b/drivers/pinctrl/sh-pfc/pfc-sh7372.c index df0ae21a5ac..6dfb1877257 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh7372.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh7372.c @@ -20,10 +20,14 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/io.h> #include <linux/kernel.h> +#include <linux/pinctrl/pinconf-generic.h> + #include <mach/irqs.h> #include <mach/sh7372.h> +#include "core.h" #include "sh_pfc.h" #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -34,6 +38,35 @@ PORT_10(fn, pfx##16, sfx), PORT_10(fn, pfx##17, sfx), \ PORT_10(fn, pfx##18, sfx), PORT_1(fn, pfx##190, sfx) +#undef _GPIO_PORT +#define _GPIO_PORT(gpio, sfx) \ + [gpio] = { \ + .name = __stringify(PORT##gpio), \ + .enum_id = PORT##gpio##_DATA, \ + } + +#define IRQC_PIN_MUX(irq, pin) \ +static const unsigned int intc_irq##irq##_pins[] = { \ + pin, \ +}; \ +static const unsigned int intc_irq##irq##_mux[] = { \ + IRQ##irq##_MARK, \ +} + +#define IRQC_PINS_MUX(irq, pin0, pin1) \ +static const unsigned int intc_irq##irq##_0_pins[] = { \ + pin0, \ +}; \ +static const unsigned int intc_irq##irq##_0_mux[] = { \ + IRQ##irq##_##pin0##_MARK, \ +}; \ +static const unsigned int intc_irq##irq##_1_pins[] = { \ + pin1, \ +}; \ +static const unsigned int intc_irq##irq##_1_mux[] = { \ + IRQ##irq##_##pin1##_MARK, \ +} + enum { PINMUX_RESERVED = 0, @@ -47,16 +80,6 @@ enum { PORT_ALL(IN), PINMUX_INPUT_END, - /* PORT0_IN_PU -> PORT190_IN_PU */ - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), - PINMUX_INPUT_PULLUP_END, - - /* PORT0_IN_PD -> PORT190_IN_PD */ - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), - PINMUX_INPUT_PULLDOWN_END, - /* PORT0_OUT -> PORT190_OUT */ PINMUX_OUTPUT_BEGIN, PORT_ALL(OUT), @@ -368,124 +391,11 @@ enum { PINMUX_MARK_END, }; -static const pinmux_enum_t pinmux_data[] = { +#define _PORT_DATA(pfx, sfx) PORT_DATA_IO(pfx) +#define PINMUX_DATA_GP_ALL() CPU_ALL_PORT(_PORT_DATA, , unused) - /* specify valid pin states for each pin in GPIO mode */ - PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1), - PORT_DATA_O(2), PORT_DATA_I_PD(3), - PORT_DATA_I_PD(4), PORT_DATA_I_PD(5), - PORT_DATA_IO_PU_PD(6), PORT_DATA_I_PD(7), - PORT_DATA_IO_PD(8), PORT_DATA_O(9), - - PORT_DATA_O(10), PORT_DATA_O(11), - PORT_DATA_IO_PU_PD(12), PORT_DATA_IO_PD(13), - PORT_DATA_IO_PD(14), PORT_DATA_O(15), - PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17), - PORT_DATA_I_PD(18), PORT_DATA_IO(19), - - PORT_DATA_IO(20), PORT_DATA_IO(21), - PORT_DATA_IO(22), PORT_DATA_IO(23), - PORT_DATA_IO(24), PORT_DATA_IO(25), - PORT_DATA_IO(26), PORT_DATA_IO(27), - PORT_DATA_IO(28), PORT_DATA_IO(29), - - PORT_DATA_IO(30), PORT_DATA_IO(31), - PORT_DATA_IO(32), PORT_DATA_IO(33), - PORT_DATA_IO(34), PORT_DATA_IO(35), - PORT_DATA_IO(36), PORT_DATA_IO(37), - PORT_DATA_IO(38), PORT_DATA_IO(39), - - PORT_DATA_IO(40), PORT_DATA_IO(41), - PORT_DATA_IO(42), PORT_DATA_IO(43), - PORT_DATA_IO(44), PORT_DATA_IO(45), - PORT_DATA_IO_PU(46), PORT_DATA_IO_PU(47), - PORT_DATA_IO_PU(48), PORT_DATA_IO_PU(49), - - PORT_DATA_IO_PU(50), PORT_DATA_IO_PU(51), - PORT_DATA_IO_PU(52), PORT_DATA_IO_PU(53), - PORT_DATA_IO_PU(54), PORT_DATA_IO_PU(55), - PORT_DATA_IO_PU(56), PORT_DATA_IO_PU(57), - PORT_DATA_IO_PU(58), PORT_DATA_IO_PU(59), - - PORT_DATA_IO_PU(60), PORT_DATA_IO_PU(61), - PORT_DATA_IO(62), PORT_DATA_O(63), - PORT_DATA_O(64), PORT_DATA_IO_PU(65), - PORT_DATA_O(66), PORT_DATA_IO_PU(67), /*66?*/ - PORT_DATA_O(68), PORT_DATA_IO(69), - - PORT_DATA_IO(70), PORT_DATA_IO(71), - PORT_DATA_O(72), PORT_DATA_I_PU(73), - PORT_DATA_I_PU_PD(74), PORT_DATA_IO_PU_PD(75), - PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77), - PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79), - - PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81), - PORT_DATA_IO_PU_PD(82), PORT_DATA_IO_PU_PD(83), - PORT_DATA_IO_PU_PD(84), PORT_DATA_IO_PU_PD(85), - PORT_DATA_IO_PU_PD(86), PORT_DATA_IO_PU_PD(87), - PORT_DATA_IO_PU_PD(88), PORT_DATA_IO_PU_PD(89), - - PORT_DATA_IO_PU_PD(90), PORT_DATA_IO_PU_PD(91), - PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93), - PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95), - PORT_DATA_IO_PU(96), PORT_DATA_IO_PU_PD(97), - PORT_DATA_IO_PU_PD(98), PORT_DATA_O(99), /*99?*/ - - PORT_DATA_IO_PD(100), PORT_DATA_IO_PD(101), - PORT_DATA_IO_PD(102), PORT_DATA_IO_PD(103), - PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), - PORT_DATA_IO_PU(106), PORT_DATA_IO_PU(107), - PORT_DATA_IO_PU(108), PORT_DATA_IO_PU(109), - - PORT_DATA_IO_PU(110), PORT_DATA_IO_PU(111), - PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113), - PORT_DATA_IO_PU(114), PORT_DATA_IO_PU(115), - PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117), - PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), - - PORT_DATA_IO_PU(120), PORT_DATA_IO_PD(121), - PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123), - PORT_DATA_IO_PD(124), PORT_DATA_IO_PD(125), - PORT_DATA_IO_PD(126), PORT_DATA_IO_PD(127), - PORT_DATA_IO_PD(128), PORT_DATA_IO_PU_PD(129), - - PORT_DATA_IO_PU_PD(130), PORT_DATA_IO_PU_PD(131), - PORT_DATA_IO_PU_PD(132), PORT_DATA_IO_PU_PD(133), - PORT_DATA_IO_PU_PD(134), PORT_DATA_IO_PU_PD(135), - PORT_DATA_IO_PD(136), PORT_DATA_IO_PD(137), - PORT_DATA_IO_PD(138), PORT_DATA_IO_PD(139), - - PORT_DATA_IO_PD(140), PORT_DATA_IO_PD(141), - PORT_DATA_IO_PD(142), PORT_DATA_IO_PU_PD(143), - PORT_DATA_IO_PD(144), PORT_DATA_IO_PD(145), - PORT_DATA_IO_PD(146), PORT_DATA_IO_PD(147), - PORT_DATA_IO_PD(148), PORT_DATA_IO_PD(149), - - PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), - PORT_DATA_IO_PU_PD(152), PORT_DATA_I_PD(153), - PORT_DATA_IO_PU_PD(154), PORT_DATA_I_PD(155), - PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), - PORT_DATA_I_PD(158), PORT_DATA_IO_PD(159), - - PORT_DATA_O(160), PORT_DATA_IO_PD(161), - PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), - PORT_DATA_I_PD(164), PORT_DATA_IO_PD(165), - PORT_DATA_I_PD(166), PORT_DATA_I_PD(167), - PORT_DATA_I_PD(168), PORT_DATA_I_PD(169), - - PORT_DATA_I_PD(170), PORT_DATA_O(171), - PORT_DATA_IO_PU_PD(172), PORT_DATA_IO_PU_PD(173), - PORT_DATA_IO_PU_PD(174), PORT_DATA_IO_PU_PD(175), - PORT_DATA_IO_PU_PD(176), PORT_DATA_IO_PU_PD(177), - PORT_DATA_IO_PU_PD(178), PORT_DATA_O(179), - - PORT_DATA_IO_PU_PD(180), PORT_DATA_IO_PU_PD(181), - PORT_DATA_IO_PU_PD(182), PORT_DATA_IO_PU_PD(183), - PORT_DATA_IO_PU_PD(184), PORT_DATA_O(185), - PORT_DATA_IO_PU_PD(186), PORT_DATA_IO_PU_PD(187), - PORT_DATA_IO_PU_PD(188), PORT_DATA_IO_PU_PD(189), - - PORT_DATA_IO_PU_PD(190), +static const pinmux_enum_t pinmux_data[] = { + PINMUX_DATA_GP_ALL(), /* IRQ */ PINMUX_DATA(IRQ0_6_MARK, PORT6_FN0, MSEL1CR_0_0), @@ -929,10 +839,582 @@ static const pinmux_enum_t pinmux_data[] = { PINMUX_DATA(MFIv4_MARK, MSEL4CR_6_1), }; +#define SH7372_PIN(pin, cfgs) \ + { \ + .name = __stringify(PORT##pin), \ + .enum_id = PORT##pin##_DATA, \ + .configs = cfgs, \ + } + +#define __I (SH_PFC_PIN_CFG_INPUT) +#define __O (SH_PFC_PIN_CFG_OUTPUT) +#define __IO (SH_PFC_PIN_CFG_INPUT | SH_PFC_PIN_CFG_OUTPUT) +#define __PD (SH_PFC_PIN_CFG_PULL_DOWN) +#define __PU (SH_PFC_PIN_CFG_PULL_UP) +#define __PUD (SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP) + +#define SH7372_PIN_I_PD(pin) SH7372_PIN(pin, __I | __PD) +#define SH7372_PIN_I_PU(pin) SH7372_PIN(pin, __I | __PU) +#define SH7372_PIN_I_PU_PD(pin) SH7372_PIN(pin, __I | __PUD) +#define SH7372_PIN_IO(pin) SH7372_PIN(pin, __IO) +#define SH7372_PIN_IO_PD(pin) SH7372_PIN(pin, __IO | __PD) +#define SH7372_PIN_IO_PU(pin) SH7372_PIN(pin, __IO | __PU) +#define SH7372_PIN_IO_PU_PD(pin) SH7372_PIN(pin, __IO | __PUD) +#define SH7372_PIN_O(pin) SH7372_PIN(pin, __O) +#define SH7372_PIN_O_PU_PD(pin) SH7372_PIN(pin, __O | __PUD) + static struct sh_pfc_pin pinmux_pins[] = { - GPIO_PORT_ALL(), + /* Table 57-1 (I/O and Pull U/D) */ + SH7372_PIN_IO_PD(0), SH7372_PIN_IO_PD(1), + SH7372_PIN_O(2), SH7372_PIN_I_PD(3), + SH7372_PIN_I_PD(4), SH7372_PIN_I_PD(5), + SH7372_PIN_IO_PU_PD(6), SH7372_PIN_I_PD(7), + SH7372_PIN_IO_PD(8), SH7372_PIN_O(9), + SH7372_PIN_O(10), SH7372_PIN_O(11), + SH7372_PIN_IO_PU_PD(12), SH7372_PIN_IO_PD(13), + SH7372_PIN_IO_PD(14), SH7372_PIN_O(15), + SH7372_PIN_IO_PD(16), SH7372_PIN_IO_PD(17), + SH7372_PIN_I_PD(18), SH7372_PIN_IO(19), + SH7372_PIN_IO(20), SH7372_PIN_IO(21), + SH7372_PIN_IO(22), SH7372_PIN_IO(23), + SH7372_PIN_IO(24), SH7372_PIN_IO(25), + SH7372_PIN_IO(26), SH7372_PIN_IO(27), + SH7372_PIN_IO(28), SH7372_PIN_IO(29), + SH7372_PIN_IO(30), SH7372_PIN_IO(31), + SH7372_PIN_IO(32), SH7372_PIN_IO(33), + SH7372_PIN_IO(34), SH7372_PIN_IO(35), + SH7372_PIN_IO(36), SH7372_PIN_IO(37), + SH7372_PIN_IO(38), SH7372_PIN_IO(39), + SH7372_PIN_IO(40), SH7372_PIN_IO(41), + SH7372_PIN_IO(42), SH7372_PIN_IO(43), + SH7372_PIN_IO(44), SH7372_PIN_IO(45), + SH7372_PIN_IO_PU(46), SH7372_PIN_IO_PU(47), + SH7372_PIN_IO_PU(48), SH7372_PIN_IO_PU(49), + SH7372_PIN_IO_PU(50), SH7372_PIN_IO_PU(51), + SH7372_PIN_IO_PU(52), SH7372_PIN_IO_PU(53), + SH7372_PIN_IO_PU(54), SH7372_PIN_IO_PU(55), + SH7372_PIN_IO_PU(56), SH7372_PIN_IO_PU(57), + SH7372_PIN_IO_PU(58), SH7372_PIN_IO_PU(59), + SH7372_PIN_IO_PU(60), SH7372_PIN_IO_PU(61), + SH7372_PIN_IO(62), SH7372_PIN_O(63), + SH7372_PIN_O(64), SH7372_PIN_IO_PU(65), + SH7372_PIN_O_PU_PD(66), SH7372_PIN_IO_PU(67), + SH7372_PIN_O(68), SH7372_PIN_IO(69), + SH7372_PIN_IO(70), SH7372_PIN_IO(71), + SH7372_PIN_O(72), SH7372_PIN_I_PU(73), + SH7372_PIN_I_PU_PD(74), SH7372_PIN_IO_PU_PD(75), + SH7372_PIN_IO_PU_PD(76), SH7372_PIN_IO_PU_PD(77), + SH7372_PIN_IO_PU_PD(78), SH7372_PIN_IO_PU_PD(79), + SH7372_PIN_IO_PU_PD(80), SH7372_PIN_IO_PU_PD(81), + SH7372_PIN_IO_PU_PD(82), SH7372_PIN_IO_PU_PD(83), + SH7372_PIN_IO_PU_PD(84), SH7372_PIN_IO_PU_PD(85), + SH7372_PIN_IO_PU_PD(86), SH7372_PIN_IO_PU_PD(87), + SH7372_PIN_IO_PU_PD(88), SH7372_PIN_IO_PU_PD(89), + SH7372_PIN_IO_PU_PD(90), SH7372_PIN_IO_PU_PD(91), + SH7372_PIN_IO_PU_PD(92), SH7372_PIN_IO_PU_PD(93), + SH7372_PIN_IO_PU_PD(94), SH7372_PIN_IO_PU_PD(95), + SH7372_PIN_IO_PU(96), SH7372_PIN_IO_PU_PD(97), + SH7372_PIN_IO_PU_PD(98), SH7372_PIN_O_PU_PD(99), + SH7372_PIN_IO_PD(100), SH7372_PIN_IO_PD(101), + SH7372_PIN_IO_PD(102), SH7372_PIN_IO_PD(103), + SH7372_PIN_IO_PD(104), SH7372_PIN_IO_PD(105), + SH7372_PIN_IO_PU(106), SH7372_PIN_IO_PU(107), + SH7372_PIN_IO_PU(108), SH7372_PIN_IO_PU(109), + SH7372_PIN_IO_PU(110), SH7372_PIN_IO_PU(111), + SH7372_PIN_IO_PD(112), SH7372_PIN_IO_PD(113), + SH7372_PIN_IO_PU(114), SH7372_PIN_IO_PU(115), + SH7372_PIN_IO_PU(116), SH7372_PIN_IO_PU(117), + SH7372_PIN_IO_PU(118), SH7372_PIN_IO_PU(119), + SH7372_PIN_IO_PU(120), SH7372_PIN_IO_PD(121), + SH7372_PIN_IO_PD(122), SH7372_PIN_IO_PD(123), + SH7372_PIN_IO_PD(124), SH7372_PIN_IO_PD(125), + SH7372_PIN_IO_PD(126), SH7372_PIN_IO_PD(127), + SH7372_PIN_IO_PD(128), SH7372_PIN_IO_PU_PD(129), + SH7372_PIN_IO_PU_PD(130), SH7372_PIN_IO_PU_PD(131), + SH7372_PIN_IO_PU_PD(132), SH7372_PIN_IO_PU_PD(133), + SH7372_PIN_IO_PU_PD(134), SH7372_PIN_IO_PU_PD(135), + SH7372_PIN_IO_PD(136), SH7372_PIN_IO_PD(137), + SH7372_PIN_IO_PD(138), SH7372_PIN_IO_PD(139), + SH7372_PIN_IO_PD(140), SH7372_PIN_IO_PD(141), + SH7372_PIN_IO_PD(142), SH7372_PIN_IO_PU_PD(143), + SH7372_PIN_IO_PD(144), SH7372_PIN_IO_PD(145), + SH7372_PIN_IO_PD(146), SH7372_PIN_IO_PD(147), + SH7372_PIN_IO_PD(148), SH7372_PIN_IO_PD(149), + SH7372_PIN_IO_PD(150), SH7372_PIN_IO_PD(151), + SH7372_PIN_IO_PU_PD(152), SH7372_PIN_I_PD(153), + SH7372_PIN_IO_PU_PD(154), SH7372_PIN_I_PD(155), + SH7372_PIN_IO_PD(156), SH7372_PIN_IO_PD(157), + SH7372_PIN_I_PD(158), SH7372_PIN_IO_PD(159), + SH7372_PIN_O(160), SH7372_PIN_IO_PD(161), + SH7372_PIN_IO_PD(162), SH7372_PIN_IO_PD(163), + SH7372_PIN_I_PD(164), SH7372_PIN_IO_PD(165), + SH7372_PIN_I_PD(166), SH7372_PIN_I_PD(167), + SH7372_PIN_I_PD(168), SH7372_PIN_I_PD(169), + SH7372_PIN_I_PD(170), SH7372_PIN_O(171), + SH7372_PIN_IO_PU_PD(172), SH7372_PIN_IO_PU_PD(173), + SH7372_PIN_IO_PU_PD(174), SH7372_PIN_IO_PU_PD(175), + SH7372_PIN_IO_PU_PD(176), SH7372_PIN_IO_PU_PD(177), + SH7372_PIN_IO_PU_PD(178), SH7372_PIN_O(179), + SH7372_PIN_IO_PU_PD(180), SH7372_PIN_IO_PU_PD(181), + SH7372_PIN_IO_PU_PD(182), SH7372_PIN_IO_PU_PD(183), + SH7372_PIN_IO_PU_PD(184), SH7372_PIN_O(185), + SH7372_PIN_IO_PU_PD(186), SH7372_PIN_IO_PU_PD(187), + SH7372_PIN_IO_PU_PD(188), SH7372_PIN_IO_PU_PD(189), + SH7372_PIN_IO_PU_PD(190), }; +/* - BSC -------------------------------------------------------------------- */ +static const unsigned int bsc_data8_pins[] = { + /* D[0:7] */ + 46, 47, 48, 49, 50, 51, 52, 53, +}; +static const unsigned int bsc_data8_mux[] = { + D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, D3_NAF3_MARK, + D4_NAF4_MARK, D5_NAF5_MARK, D6_NAF6_MARK, D7_NAF7_MARK, +}; +static const unsigned int bsc_data16_pins[] = { + /* D[0:15] */ + 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, +}; +static const unsigned int bsc_data16_mux[] = { + D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, D3_NAF3_MARK, + D4_NAF4_MARK, D5_NAF5_MARK, D6_NAF6_MARK, D7_NAF7_MARK, + D8_NAF8_MARK, D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK, + D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, D15_NAF15_MARK, +}; +static const unsigned int bsc_cs0_pins[] = { + /* CS */ + 62, +}; +static const unsigned int bsc_cs0_mux[] = { + CS0_MARK, +}; +static const unsigned int bsc_cs2_pins[] = { + /* CS */ + 63, +}; +static const unsigned int bsc_cs2_mux[] = { + CS2_MARK, +}; +static const unsigned int bsc_cs4_pins[] = { + /* CS */ + 64, +}; +static const unsigned int bsc_cs4_mux[] = { + CS4_MARK, +}; +static const unsigned int bsc_cs5a_pins[] = { + /* CS */ + 65, +}; +static const unsigned int bsc_cs5a_mux[] = { + CS5A_MARK, +}; +static const unsigned int bsc_cs5b_pins[] = { + /* CS */ + 66, +}; +static const unsigned int bsc_cs5b_mux[] = { + CS5B_MARK, +}; +static const unsigned int bsc_cs6a_pins[] = { + /* CS */ + 67, +}; +static const unsigned int bsc_cs6a_mux[] = { + CS6A_MARK, +}; +static const unsigned int bsc_rd_we8_pins[] = { + /* RD, WE[0] */ + 69, 70, +}; +static const unsigned int bsc_rd_we8_mux[] = { + RD_FSC_MARK, WE0_FWE_MARK, +}; +static const unsigned int bsc_rd_we16_pins[] = { + /* RD, WE[0:1] */ + 69, 70, 71, +}; +static const unsigned int bsc_rd_we16_mux[] = { + RD_FSC_MARK, WE0_FWE_MARK, WE1_MARK, +}; +static const unsigned int bsc_bs_pins[] = { + /* BS */ + 19, +}; +static const unsigned int bsc_bs_mux[] = { + BS_MARK, +}; +static const unsigned int bsc_rdwr_pins[] = { + /* RDWR */ + 75, +}; +static const unsigned int bsc_rdwr_mux[] = { + RDWR_MARK, +}; +static const unsigned int bsc_wait_pins[] = { + /* WAIT */ + 74, +}; +static const unsigned int bsc_wait_mux[] = { + WAIT_MARK, +}; +/* - CEU -------------------------------------------------------------------- */ +static const unsigned int ceu_data_0_7_pins[] = { + /* D[0:7] */ + 102, 103, 104, 105, 106, 107, 108, 109, +}; +static const unsigned int ceu_data_0_7_mux[] = { + VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK, VIO_D3_MARK, + VIO_D4_MARK, VIO_D5_MARK, VIO_D6_MARK, VIO_D7_MARK, +}; +static const unsigned int ceu_data_8_15_pins[] = { + /* D[8:15] */ + 110, 111, 112, 113, 114, 115, 116, 117, +}; +static const unsigned int ceu_data_8_15_mux[] = { + VIO_D8_MARK, VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK, + VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK, VIO_D15_MARK, +}; +static const unsigned int ceu_clk_0_pins[] = { + /* CKO */ + 120, +}; +static const unsigned int ceu_clk_0_mux[] = { + VIO_CKO_MARK, +}; +static const unsigned int ceu_clk_1_pins[] = { + /* CKO */ + 16, +}; +static const unsigned int ceu_clk_1_mux[] = { + VIO_CKO1_MARK, +}; +static const unsigned int ceu_clk_2_pins[] = { + /* CKO */ + 17, +}; +static const unsigned int ceu_clk_2_mux[] = { + VIO_CKO2_MARK, +}; +static const unsigned int ceu_sync_pins[] = { + /* CLK, VD, HD */ + 118, 100, 101, +}; +static const unsigned int ceu_sync_mux[] = { + VIO_CLK_MARK, VIO_VD_MARK, VIO_HD_MARK, +}; +static const unsigned int ceu_field_pins[] = { + /* FIELD */ + 119, +}; +static const unsigned int ceu_field_mux[] = { + VIO_FIELD_MARK, +}; +/* - FLCTL ------------------------------------------------------------------ */ +static const unsigned int flctl_data_pins[] = { + /* NAF[0:15] */ + 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, +}; +static const unsigned int flctl_data_mux[] = { + D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, D3_NAF3_MARK, + D4_NAF4_MARK, D5_NAF5_MARK, D6_NAF6_MARK, D7_NAF7_MARK, + D8_NAF8_MARK, D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK, + D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, D15_NAF15_MARK, +}; +static const unsigned int flctl_ce0_pins[] = { + /* CE */ + 68, +}; +static const unsigned int flctl_ce0_mux[] = { + FCE0_MARK, +}; +static const unsigned int flctl_ce1_pins[] = { + /* CE */ + 66, +}; +static const unsigned int flctl_ce1_mux[] = { + FCE1_MARK, +}; +static const unsigned int flctl_ctrl_pins[] = { + /* FCDE, FOE, FSC, FWE, FRB */ + 24, 23, 69, 70, 73, +}; +static const unsigned int flctl_ctrl_mux[] = { + A5_FCDE_MARK, A4_FOE_MARK, RD_FSC_MARK, WE0_FWE_MARK, FRB_MARK, +}; +/* - FSIA ------------------------------------------------------------------- */ +static const unsigned int fsia_mclk_in_pins[] = { + /* CK */ + 4, +}; +static const unsigned int fsia_mclk_in_mux[] = { + FSIACK_MARK, +}; +static const unsigned int fsia_mclk_out_pins[] = { + /* OMC */ + 8, +}; +static const unsigned int fsia_mclk_out_mux[] = { + FSIAOMC_MARK, +}; +static const unsigned int fsia_sclk_in_pins[] = { + /* ILR, IBT */ + 5, 6, +}; +static const unsigned int fsia_sclk_in_mux[] = { + FSIAILR_MARK, FSIAIBT_MARK, +}; +static const unsigned int fsia_sclk_out_pins[] = { + /* OLR, OBT */ + 9, 10, +}; +static const unsigned int fsia_sclk_out_mux[] = { + FSIAOLR_MARK, FSIAOBT_MARK, +}; +static const unsigned int fsia_data_in_pins[] = { + /* ISLD */ + 7, +}; +static const unsigned int fsia_data_in_mux[] = { + FSIAISLD_MARK, +}; +static const unsigned int fsia_data_out_pins[] = { + /* OSLD */ + 11, +}; +static const unsigned int fsia_data_out_mux[] = { + FSIAOSLD_MARK, +}; +static const unsigned int fsia_spdif_0_pins[] = { + /* SPDIF */ + 11, +}; +static const unsigned int fsia_spdif_0_mux[] = { + FSIASPDIF_11_MARK, +}; +static const unsigned int fsia_spdif_1_pins[] = { + /* SPDIF */ + 15, +}; +static const unsigned int fsia_spdif_1_mux[] = { + FSIASPDIF_15_MARK, +}; +/* - FSIB ------------------------------------------------------------------- */ +static const unsigned int fsib_mclk_in_pins[] = { + /* CK */ + 4, +}; +static const unsigned int fsib_mclk_in_mux[] = { + FSIBCK_MARK, +}; +/* - HDMI ------------------------------------------------------------------- */ +static const unsigned int hdmi_pins[] = { + /* HPD, CEC */ + 169, 170, +}; +static const unsigned int hdmi_mux[] = { + HDMI_HPD_MARK, HDMI_CEC_MARK, +}; +/* - INTC ------------------------------------------------------------------- */ +IRQC_PINS_MUX(0, 6, 162); +IRQC_PIN_MUX(1, 12); +IRQC_PINS_MUX(2, 4, 5); +IRQC_PINS_MUX(3, 8, 16); +IRQC_PINS_MUX(4, 17, 163); +IRQC_PIN_MUX(5, 18); +IRQC_PINS_MUX(6, 39, 164); +IRQC_PINS_MUX(7, 40, 167); +IRQC_PINS_MUX(8, 41, 168); +IRQC_PINS_MUX(9, 42, 169); +IRQC_PIN_MUX(10, 65); +IRQC_PIN_MUX(11, 67); +IRQC_PINS_MUX(12, 80, 137); +IRQC_PINS_MUX(13, 81, 145); +IRQC_PINS_MUX(14, 82, 146); +IRQC_PINS_MUX(15, 83, 147); +IRQC_PINS_MUX(16, 84, 170); +IRQC_PIN_MUX(17, 85); +IRQC_PIN_MUX(18, 86); +IRQC_PIN_MUX(19, 87); +IRQC_PIN_MUX(20, 92); +IRQC_PIN_MUX(21, 93); +IRQC_PIN_MUX(22, 94); +IRQC_PIN_MUX(23, 95); +IRQC_PIN_MUX(24, 112); +IRQC_PIN_MUX(25, 119); +IRQC_PINS_MUX(26, 121, 172); +IRQC_PINS_MUX(27, 122, 180); +IRQC_PINS_MUX(28, 123, 181); +IRQC_PINS_MUX(29, 129, 182); +IRQC_PINS_MUX(30, 130, 183); +IRQC_PINS_MUX(31, 138, 184); +/* - KEYSC ------------------------------------------------------------------ */ +static const unsigned int keysc_in04_0_pins[] = { + /* KEYIN[0:4] */ + 136, 135, 134, 133, 132, +}; +static const unsigned int keysc_in04_0_mux[] = { + KEYIN0_136_MARK, KEYIN1_135_MARK, KEYIN2_134_MARK, KEYIN3_133_MARK, + KEYIN4_MARK, +}; +static const unsigned int keysc_in04_1_pins[] = { + /* KEYIN[0:4] */ + 121, 122, 123, 124, 132, +}; +static const unsigned int keysc_in04_1_mux[] = { + KEYIN0_121_MARK, KEYIN1_122_MARK, KEYIN2_123_MARK, KEYIN3_124_MARK, + KEYIN4_MARK, +}; +static const unsigned int keysc_in5_pins[] = { + /* KEYIN5 */ + 131, +}; +static const unsigned int keysc_in5_mux[] = { + KEYIN5_MARK, +}; +static const unsigned int keysc_in6_pins[] = { + /* KEYIN6 */ + 130, +}; +static const unsigned int keysc_in6_mux[] = { + KEYIN6_MARK, +}; +static const unsigned int keysc_in7_pins[] = { + /* KEYIN7 */ + 129, +}; +static const unsigned int keysc_in7_mux[] = { + KEYIN7_MARK, +}; +static const unsigned int keysc_out4_pins[] = { + /* KEYOUT[0:3] */ + 128, 127, 126, 125, +}; +static const unsigned int keysc_out4_mux[] = { + KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK, +}; +static const unsigned int keysc_out5_pins[] = { + /* KEYOUT[0:4] */ + 128, 127, 126, 125, 124, +}; +static const unsigned int keysc_out5_mux[] = { + KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK, + KEYOUT4_MARK, +}; +static const unsigned int keysc_out6_pins[] = { + /* KEYOUT[0:5] */ + 128, 127, 126, 125, 124, 123, +}; +static const unsigned int keysc_out6_mux[] = { + KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK, + KEYOUT4_MARK, KEYOUT5_MARK, +}; +static const unsigned int keysc_out8_pins[] = { + /* KEYOUT[0:7] */ + 128, 127, 126, 125, 124, 123, 122, 121, +}; +static const unsigned int keysc_out8_mux[] = { + KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK, + KEYOUT4_MARK, KEYOUT5_MARK, KEYOUT6_MARK, KEYOUT7_MARK, +}; +/* - LCD -------------------------------------------------------------------- */ +static const unsigned int lcd_data8_pins[] = { + /* D[0:7] */ + 121, 122, 123, 124, 125, 126, 127, 128, +}; +static const unsigned int lcd_data8_mux[] = { + /* LCDC */ + LCDD0_MARK, LCDD1_MARK, LCDD2_MARK, LCDD3_MARK, + LCDD4_MARK, LCDD5_MARK, LCDD6_MARK, LCDD7_MARK, +}; +static const unsigned int lcd_data9_pins[] = { + /* D[0:8] */ + 121, 122, 123, 124, 125, 126, 127, 128, + 129, + 137, 138, 139, 140, 141, 142, 143, 144, +}; +static const unsigned int lcd_data9_mux[] = { + LCDD0_MARK, LCDD1_MARK, LCDD2_MARK, LCDD3_MARK, + LCDD4_MARK, LCDD5_MARK, LCDD6_MARK, LCDD7_MARK, + LCDD8_MARK, +}; +static const unsigned int lcd_data12_pins[] = { + /* D[0:11] */ + 121, 122, 123, 124, 125, 126, 127, 128, + 129, 130, 131, 132, +}; +static const unsigned int lcd_data12_mux[] = { + LCDD0_MARK, LCDD1_MARK, LCDD2_MARK, LCDD3_MARK, + LCDD4_MARK, LCDD5_MARK, LCDD6_MARK, LCDD7_MARK, + LCDD8_MARK, LCDD9_MARK, LCDD10_MARK, LCDD11_MARK, +}; +static const unsigned int lcd_data16_pins[] = { + /* D[0:15] */ + 121, 122, 123, 124, 125, 126, 127, 128, + 129, 130, 131, 132, 133, 134, 135, 136, +}; +static const unsigned int lcd_data16_mux[] = { + LCDD0_MARK, LCDD1_MARK, LCDD2_MARK, LCDD3_MARK, + LCDD4_MARK, LCDD5_MARK, LCDD6_MARK, LCDD7_MARK, + LCDD8_MARK, LCDD9_MARK, LCDD10_MARK, LCDD11_MARK, + LCDD12_MARK, LCDD13_MARK, LCDD14_MARK, LCDD15_MARK, +}; +static const unsigned int lcd_data18_pins[] = { + /* D[0:17] */ + 121, 122, 123, 124, 125, 126, 127, 128, + 129, 130, 131, 132, 133, 134, 135, 136, + 137, 138, +}; +static const unsigned int lcd_data18_mux[] = { + LCDD0_MARK, LCDD1_MARK, LCDD2_MARK, LCDD3_MARK, + LCDD4_MARK, LCDD5_MARK, LCDD6_MARK, LCDD7_MARK, + LCDD8_MARK, LCDD9_MARK, LCDD10_MARK, LCDD11_MARK, + LCDD12_MARK, LCDD13_MARK, LCDD14_MARK, LCDD15_MARK, + LCDD16_MARK, LCDD17_MARK, +}; +static const unsigned int lcd_data24_pins[] = { + /* D[0:23] */ + 121, 122, 123, 124, 125, 126, 127, 128, + 129, 130, 131, 132, 133, 134, 135, 136, + 137, 138, 139, 140, 141, 142, 143, 144, +}; +static const unsigned int lcd_data24_mux[] = { + LCDD0_MARK, LCDD1_MARK, LCDD2_MARK, LCDD3_MARK, + LCDD4_MARK, LCDD5_MARK, LCDD6_MARK, LCDD7_MARK, + LCDD8_MARK, LCDD9_MARK, LCDD10_MARK, LCDD11_MARK, + LCDD12_MARK, LCDD13_MARK, LCDD14_MARK, LCDD15_MARK, + LCDD16_MARK, LCDD17_MARK, LCDD18_MARK, LCDD19_MARK, + LCDD20_MARK, LCDD21_MARK, LCDD22_MARK, LCDD23_MARK, +}; +static const unsigned int lcd_display_pins[] = { + /* DON */ + 151, +}; +static const unsigned int lcd_display_mux[] = { + LCDDON_MARK, +}; +static const unsigned int lcd_lclk_pins[] = { + /* LCLK */ + 150, +}; +static const unsigned int lcd_lclk_mux[] = { + LCDLCLK_MARK, +}; +static const unsigned int lcd_sync_pins[] = { + /* VSYN, HSYN, DCK, DISP */ + 146, 145, 147, 149, +}; +static const unsigned int lcd_sync_mux[] = { + LCDVSYN_MARK, LCDHSYN_MARK, LCDDCK_MARK, LCDDISP_MARK, +}; +static const unsigned int lcd_sys_pins[] = { + /* CS, WR, RD, RS */ + 145, 147, 148, 149, +}; +static const unsigned int lcd_sys_mux[] = { + LCDCS_MARK, LCDWR_MARK, LCDRD_MARK, LCDRS_MARK, +}; /* - MMCIF ------------------------------------------------------------------ */ static const unsigned int mmc0_data1_0_pins[] = { /* D[0] */ @@ -993,6 +1475,139 @@ static const unsigned int mmc0_ctrl_1_pins[] = { static const unsigned int mmc0_ctrl_1_mux[] = { MMCCMD1_MARK, MMCCLK1_MARK, }; +/* - SCIFA0 ----------------------------------------------------------------- */ +static const unsigned int scifa0_data_pins[] = { + /* RXD, TXD */ + 153, 152, +}; +static const unsigned int scifa0_data_mux[] = { + SCIFA0_RXD_MARK, SCIFA0_TXD_MARK, +}; +static const unsigned int scifa0_clk_pins[] = { + /* SCK */ + 156, +}; +static const unsigned int scifa0_clk_mux[] = { + SCIFA0_SCK_MARK, +}; +static const unsigned int scifa0_ctrl_pins[] = { + /* RTS, CTS */ + 157, 158, +}; +static const unsigned int scifa0_ctrl_mux[] = { + SCIFA0_RTS_MARK, SCIFA0_CTS_MARK, +}; +/* - SCIFA1 ----------------------------------------------------------------- */ +static const unsigned int scifa1_data_pins[] = { + /* RXD, TXD */ + 155, 154, +}; +static const unsigned int scifa1_data_mux[] = { + SCIFA1_RXD_MARK, SCIFA1_TXD_MARK, +}; +static const unsigned int scifa1_clk_pins[] = { + /* SCK */ + 159, +}; +static const unsigned int scifa1_clk_mux[] = { + SCIFA1_SCK_MARK, +}; +static const unsigned int scifa1_ctrl_pins[] = { + /* RTS, CTS */ + 160, 161, +}; +static const unsigned int scifa1_ctrl_mux[] = { + SCIFA1_RTS_MARK, SCIFA1_CTS_MARK, +}; +/* - SCIFA2 ----------------------------------------------------------------- */ +static const unsigned int scifa2_data_pins[] = { + /* RXD, TXD */ + 97, 96, +}; +static const unsigned int scifa2_data_mux[] = { + SCIFA2_RXD1_MARK, SCIFA2_TXD1_MARK, +}; +static const unsigned int scifa2_clk_pins[] = { + /* SCK */ + 98, +}; +static const unsigned int scifa2_clk_mux[] = { + SCIFA2_SCK1_MARK, +}; +static const unsigned int scifa2_ctrl_pins[] = { + /* RTS, CTS */ + 95, 94, +}; +static const unsigned int scifa2_ctrl_mux[] = { + SCIFA2_RTS1_MARK, SCIFA2_CTS1_MARK, +}; +/* - SCIFA3 ----------------------------------------------------------------- */ +static const unsigned int scifa3_data_pins[] = { + /* RXD, TXD */ + 144, 143, +}; +static const unsigned int scifa3_data_mux[] = { + SCIFA3_RXD_MARK, SCIFA3_TXD_MARK, +}; +static const unsigned int scifa3_clk_pins[] = { + /* SCK */ + 142, +}; +static const unsigned int scifa3_clk_mux[] = { + SCIFA3_SCK_MARK, +}; +static const unsigned int scifa3_ctrl_0_pins[] = { + /* RTS, CTS */ + 44, 43, +}; +static const unsigned int scifa3_ctrl_0_mux[] = { + SCIFA3_RTS_44_MARK, SCIFA3_CTS_43_MARK, +}; +static const unsigned int scifa3_ctrl_1_pins[] = { + /* RTS, CTS */ + 141, 140, +}; +static const unsigned int scifa3_ctrl_1_mux[] = { + SCIFA3_RTS_141_MARK, SCIFA3_CTS_140_MARK, +}; +/* - SCIFA4 ----------------------------------------------------------------- */ +static const unsigned int scifa4_data_pins[] = { + /* RXD, TXD */ + 5, 6, +}; +static const unsigned int scifa4_data_mux[] = { + SCIFA4_RXD_MARK, SCIFA4_TXD_MARK, +}; +/* - SCIFA5 ----------------------------------------------------------------- */ +static const unsigned int scifa5_data_pins[] = { + /* RXD, TXD */ + 8, 12, +}; +static const unsigned int scifa5_data_mux[] = { + SCIFA5_RXD_MARK, SCIFA5_TXD_MARK, +}; +/* - SCIFB ------------------------------------------------------------------ */ +static const unsigned int scifb_data_pins[] = { + /* RXD, TXD */ + 166, 165, +}; +static const unsigned int scifb_data_mux[] = { + SCIFB_RXD_MARK, SCIFB_TXD_MARK, +}; +static const unsigned int scifb_clk_pins[] = { + /* SCK */ + 162, +}; +static const unsigned int scifb_clk_mux[] = { + SCIFB_SCK_MARK, +}; +static const unsigned int scifb_ctrl_pins[] = { + /* RTS, CTS */ + 163, 164, +}; +static const unsigned int scifb_ctrl_mux[] = { + SCIFB_RTS_MARK, SCIFB_CTS_MARK, +}; /* - SDHI0 ------------------------------------------------------------------ */ static const unsigned int sdhi0_data1_pins[] = { /* D0 */ @@ -1073,8 +1688,169 @@ static const unsigned int sdhi2_ctrl_pins[] = { static const unsigned int sdhi2_ctrl_mux[] = { SDHICMD2_MARK, SDHICLK2_MARK, }; +/* - USB0 ------------------------------------------------------------------- */ +static const unsigned int usb0_vbus_pins[] = { + /* VBUS */ + 167, +}; +static const unsigned int usb0_vbus_mux[] = { + VBUS0_0_MARK, +}; +static const unsigned int usb0_otg_id_pins[] = { + /* IDIN */ + 113, +}; +static const unsigned int usb0_otg_id_mux[] = { + IDIN_0_MARK, +}; +static const unsigned int usb0_otg_ctrl_pins[] = { + /* PWEN, EXTLP, OVCN, OVCN2 */ + 116, 114, 117, 115, +}; +static const unsigned int usb0_otg_ctrl_mux[] = { + PWEN_0_MARK, EXTLP_0_MARK, OVCN_0_MARK, OVCN2_0_MARK, +}; +/* - USB1 ------------------------------------------------------------------- */ +static const unsigned int usb1_vbus_pins[] = { + /* VBUS */ + 168, +}; +static const unsigned int usb1_vbus_mux[] = { + VBUS0_1_MARK, +}; +static const unsigned int usb1_otg_id_0_pins[] = { + /* IDIN */ + 113, +}; +static const unsigned int usb1_otg_id_0_mux[] = { + IDIN_1_113_MARK, +}; +static const unsigned int usb1_otg_id_1_pins[] = { + /* IDIN */ + 18, +}; +static const unsigned int usb1_otg_id_1_mux[] = { + IDIN_1_18_MARK, +}; +static const unsigned int usb1_otg_ctrl_0_pins[] = { + /* PWEN, EXTLP, OVCN, OVCN2 */ + 115, 116, 114, 117, 113, +}; +static const unsigned int usb1_otg_ctrl_0_mux[] = { + PWEN_1_115_MARK, EXTLP_1_MARK, OVCN_1_114_MARK, OVCN2_1_MARK, +}; +static const unsigned int usb1_otg_ctrl_1_pins[] = { + /* PWEN, EXTLP, OVCN, OVCN2 */ + 138, 116, 162, 117, 18, +}; +static const unsigned int usb1_otg_ctrl_1_mux[] = { + PWEN_1_138_MARK, EXTLP_1_MARK, OVCN_1_162_MARK, OVCN2_1_MARK, +}; static const struct sh_pfc_pin_group pinmux_groups[] = { + SH_PFC_PIN_GROUP(bsc_data8), + SH_PFC_PIN_GROUP(bsc_data16), + SH_PFC_PIN_GROUP(bsc_cs0), + SH_PFC_PIN_GROUP(bsc_cs2), + SH_PFC_PIN_GROUP(bsc_cs4), + SH_PFC_PIN_GROUP(bsc_cs5a), + SH_PFC_PIN_GROUP(bsc_cs5b), + SH_PFC_PIN_GROUP(bsc_cs6a), + SH_PFC_PIN_GROUP(bsc_rd_we8), + SH_PFC_PIN_GROUP(bsc_rd_we16), + SH_PFC_PIN_GROUP(bsc_bs), + SH_PFC_PIN_GROUP(bsc_rdwr), + SH_PFC_PIN_GROUP(ceu_data_0_7), + SH_PFC_PIN_GROUP(ceu_data_8_15), + SH_PFC_PIN_GROUP(ceu_clk_0), + SH_PFC_PIN_GROUP(ceu_clk_1), + SH_PFC_PIN_GROUP(ceu_clk_2), + SH_PFC_PIN_GROUP(ceu_sync), + SH_PFC_PIN_GROUP(ceu_field), + SH_PFC_PIN_GROUP(flctl_data), + SH_PFC_PIN_GROUP(flctl_ce0), + SH_PFC_PIN_GROUP(flctl_ce1), + SH_PFC_PIN_GROUP(flctl_ctrl), + SH_PFC_PIN_GROUP(fsia_mclk_in), + SH_PFC_PIN_GROUP(fsia_mclk_out), + SH_PFC_PIN_GROUP(fsia_sclk_in), + SH_PFC_PIN_GROUP(fsia_sclk_out), + SH_PFC_PIN_GROUP(fsia_data_in), + SH_PFC_PIN_GROUP(fsia_data_out), + SH_PFC_PIN_GROUP(fsia_spdif_0), + SH_PFC_PIN_GROUP(fsia_spdif_1), + SH_PFC_PIN_GROUP(fsib_mclk_in), + SH_PFC_PIN_GROUP(hdmi), + SH_PFC_PIN_GROUP(intc_irq0_0), + SH_PFC_PIN_GROUP(intc_irq0_1), + SH_PFC_PIN_GROUP(intc_irq1), + SH_PFC_PIN_GROUP(intc_irq2_0), + SH_PFC_PIN_GROUP(intc_irq2_1), + SH_PFC_PIN_GROUP(intc_irq3_0), + SH_PFC_PIN_GROUP(intc_irq3_1), + SH_PFC_PIN_GROUP(intc_irq4_0), + SH_PFC_PIN_GROUP(intc_irq4_1), + SH_PFC_PIN_GROUP(intc_irq5), + SH_PFC_PIN_GROUP(intc_irq6_0), + SH_PFC_PIN_GROUP(intc_irq6_1), + SH_PFC_PIN_GROUP(intc_irq7_0), + SH_PFC_PIN_GROUP(intc_irq7_1), + SH_PFC_PIN_GROUP(intc_irq8_0), + SH_PFC_PIN_GROUP(intc_irq8_1), + SH_PFC_PIN_GROUP(intc_irq9_0), + SH_PFC_PIN_GROUP(intc_irq9_1), + SH_PFC_PIN_GROUP(intc_irq10), + SH_PFC_PIN_GROUP(intc_irq11), + SH_PFC_PIN_GROUP(intc_irq12_0), + SH_PFC_PIN_GROUP(intc_irq12_1), + SH_PFC_PIN_GROUP(intc_irq13_0), + SH_PFC_PIN_GROUP(intc_irq13_1), + SH_PFC_PIN_GROUP(intc_irq14_0), + SH_PFC_PIN_GROUP(intc_irq14_1), + SH_PFC_PIN_GROUP(intc_irq15_0), + SH_PFC_PIN_GROUP(intc_irq15_1), + SH_PFC_PIN_GROUP(intc_irq16_0), + SH_PFC_PIN_GROUP(intc_irq16_1), + SH_PFC_PIN_GROUP(intc_irq17), + SH_PFC_PIN_GROUP(intc_irq18), + SH_PFC_PIN_GROUP(intc_irq19), + SH_PFC_PIN_GROUP(intc_irq20), + SH_PFC_PIN_GROUP(intc_irq21), + SH_PFC_PIN_GROUP(intc_irq22), + SH_PFC_PIN_GROUP(intc_irq23), + SH_PFC_PIN_GROUP(intc_irq24), + SH_PFC_PIN_GROUP(intc_irq25), + SH_PFC_PIN_GROUP(intc_irq26_0), + SH_PFC_PIN_GROUP(intc_irq26_1), + SH_PFC_PIN_GROUP(intc_irq27_0), + SH_PFC_PIN_GROUP(intc_irq27_1), + SH_PFC_PIN_GROUP(intc_irq28_0), + SH_PFC_PIN_GROUP(intc_irq28_1), + SH_PFC_PIN_GROUP(intc_irq29_0), + SH_PFC_PIN_GROUP(intc_irq29_1), + SH_PFC_PIN_GROUP(intc_irq30_0), + SH_PFC_PIN_GROUP(intc_irq30_1), + SH_PFC_PIN_GROUP(intc_irq31_0), + SH_PFC_PIN_GROUP(intc_irq31_1), + SH_PFC_PIN_GROUP(keysc_in04_0), + SH_PFC_PIN_GROUP(keysc_in04_1), + SH_PFC_PIN_GROUP(keysc_in5), + SH_PFC_PIN_GROUP(keysc_in6), + SH_PFC_PIN_GROUP(keysc_in7), + SH_PFC_PIN_GROUP(keysc_out4), + SH_PFC_PIN_GROUP(keysc_out5), + SH_PFC_PIN_GROUP(keysc_out6), + SH_PFC_PIN_GROUP(keysc_out8), + SH_PFC_PIN_GROUP(lcd_data8), + SH_PFC_PIN_GROUP(lcd_data9), + SH_PFC_PIN_GROUP(lcd_data12), + SH_PFC_PIN_GROUP(lcd_data16), + SH_PFC_PIN_GROUP(lcd_data18), + SH_PFC_PIN_GROUP(lcd_data24), + SH_PFC_PIN_GROUP(lcd_display), + SH_PFC_PIN_GROUP(lcd_lclk), + SH_PFC_PIN_GROUP(lcd_sync), + SH_PFC_PIN_GROUP(lcd_sys), SH_PFC_PIN_GROUP(mmc0_data1_0), SH_PFC_PIN_GROUP(mmc0_data4_0), SH_PFC_PIN_GROUP(mmc0_data8_0), @@ -1083,6 +1859,24 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(mmc0_data4_1), SH_PFC_PIN_GROUP(mmc0_data8_1), SH_PFC_PIN_GROUP(mmc0_ctrl_1), + SH_PFC_PIN_GROUP(scifa0_data), + SH_PFC_PIN_GROUP(scifa0_clk), + SH_PFC_PIN_GROUP(scifa0_ctrl), + SH_PFC_PIN_GROUP(scifa1_data), + SH_PFC_PIN_GROUP(scifa1_clk), + SH_PFC_PIN_GROUP(scifa1_ctrl), + SH_PFC_PIN_GROUP(scifa2_data), + SH_PFC_PIN_GROUP(scifa2_clk), + SH_PFC_PIN_GROUP(scifa2_ctrl), + SH_PFC_PIN_GROUP(scifa3_data), + SH_PFC_PIN_GROUP(scifa3_clk), + SH_PFC_PIN_GROUP(scifa3_ctrl_0), + SH_PFC_PIN_GROUP(scifa3_ctrl_1), + SH_PFC_PIN_GROUP(scifa4_data), + SH_PFC_PIN_GROUP(scifa5_data), + SH_PFC_PIN_GROUP(scifb_data), + SH_PFC_PIN_GROUP(scifb_clk), + SH_PFC_PIN_GROUP(scifb_ctrl), SH_PFC_PIN_GROUP(sdhi0_data1), SH_PFC_PIN_GROUP(sdhi0_data4), SH_PFC_PIN_GROUP(sdhi0_ctrl), @@ -1094,6 +1888,144 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(sdhi2_data1), SH_PFC_PIN_GROUP(sdhi2_data4), SH_PFC_PIN_GROUP(sdhi2_ctrl), + SH_PFC_PIN_GROUP(usb0_vbus), + SH_PFC_PIN_GROUP(usb0_otg_id), + SH_PFC_PIN_GROUP(usb0_otg_ctrl), + SH_PFC_PIN_GROUP(usb1_vbus), + SH_PFC_PIN_GROUP(usb1_otg_id_0), + SH_PFC_PIN_GROUP(usb1_otg_id_1), + SH_PFC_PIN_GROUP(usb1_otg_ctrl_0), + SH_PFC_PIN_GROUP(usb1_otg_ctrl_1), +}; + +static const char * const bsc_groups[] = { + "bsc_data8", + "bsc_data16", + "bsc_cs0", + "bsc_cs2", + "bsc_cs4", + "bsc_cs5a", + "bsc_cs5b", + "bsc_cs6a", + "bsc_rd_we8", + "bsc_rd_we16", + "bsc_bs", + "bsc_rdwr", +}; + +static const char * const ceu_groups[] = { + "ceu_data_0_7", + "ceu_data_8_15", + "ceu_clk_0", + "ceu_clk_1", + "ceu_clk_2", + "ceu_sync", + "ceu_field", +}; + +static const char * const flctl_groups[] = { + "flctl_data", + "flctl_ce0", + "flctl_ce1", + "flctl_ctrl", +}; + +static const char * const fsia_groups[] = { + "fsia_mclk_in", + "fsia_mclk_out", + "fsia_sclk_in", + "fsia_sclk_out", + "fsia_data_in", + "fsia_data_out", + "fsia_spdif_0", + "fsia_spdif_1", +}; + +static const char * const fsib_groups[] = { + "fsib_mclk_in", +}; + +static const char * const hdmi_groups[] = { + "hdmi", +}; + +static const char * const intc_groups[] = { + "intc_irq0_0", + "intc_irq0_1", + "intc_irq1", + "intc_irq2_0", + "intc_irq2_1", + "intc_irq3_0", + "intc_irq3_1", + "intc_irq4_0", + "intc_irq4_1", + "intc_irq5", + "intc_irq6_0", + "intc_irq6_1", + "intc_irq7_0", + "intc_irq7_1", + "intc_irq8_0", + "intc_irq8_1", + "intc_irq9_0", + "intc_irq9_1", + "intc_irq10", + "intc_irq11", + "intc_irq12_0", + "intc_irq12_1", + "intc_irq13_0", + "intc_irq13_1", + "intc_irq14_0", + "intc_irq14_1", + "intc_irq15_0", + "intc_irq15_1", + "intc_irq16_0", + "intc_irq16_1", + "intc_irq17", + "intc_irq18", + "intc_irq19", + "intc_irq20", + "intc_irq21", + "intc_irq22", + "intc_irq23", + "intc_irq24", + "intc_irq25", + "intc_irq26_0", + "intc_irq26_1", + "intc_irq27_0", + "intc_irq27_1", + "intc_irq28_0", + "intc_irq28_1", + "intc_irq29_0", + "intc_irq29_1", + "intc_irq30_0", + "intc_irq30_1", + "intc_irq31_0", + "intc_irq31_1", +}; + +static const char * const keysc_groups[] = { + "keysc_in04_0", + "keysc_in04_1", + "keysc_in5", + "keysc_in6", + "keysc_in7", + "keysc_out4", + "keysc_out5", + "keysc_out6", + "keysc_out8", +}; + +static const char * const lcd_groups[] = { + "lcd_data8", + "lcd_data9", + "lcd_data12", + "lcd_data16", + "lcd_data18", + "lcd_data24", + "lcd_display", + "lcd_lclk", + "lcd_sync", + "lcd_sys", }; static const char * const mmc0_groups[] = { @@ -1107,6 +2039,45 @@ static const char * const mmc0_groups[] = { "mmc0_ctrl_1", }; +static const char * const scifa0_groups[] = { + "scifa0_data", + "scifa0_clk", + "scifa0_ctrl", +}; + +static const char * const scifa1_groups[] = { + "scifa1_data", + "scifa1_clk", + "scifa1_ctrl", +}; + +static const char * const scifa2_groups[] = { + "scifa2_data", + "scifa2_clk", + "scifa2_ctrl", +}; + +static const char * const scifa3_groups[] = { + "scifa3_data", + "scifa3_clk", + "scifa3_ctrl_0", + "scifa3_ctrl_1", +}; + +static const char * const scifa4_groups[] = { + "scifa4_data", +}; + +static const char * const scifa5_groups[] = { + "scifa5_data", +}; + +static const char * const scifb_groups[] = { + "scifb_data", + "scifb_clk", + "scifb_ctrl", +}; + static const char * const sdhi0_groups[] = { "sdhi0_data1", "sdhi0_data4", @@ -1127,256 +2098,55 @@ static const char * const sdhi2_groups[] = { "sdhi2_ctrl", }; +static const char * const usb0_groups[] = { + "usb0_vbus", + "usb0_otg_id", + "usb0_otg_ctrl", +}; + +static const char * const usb1_groups[] = { + "usb1_vbus", + "usb1_otg_id_0", + "usb1_otg_id_1", + "usb1_otg_ctrl_0", + "usb1_otg_ctrl_1", +}; + static const struct sh_pfc_function pinmux_functions[] = { + SH_PFC_FUNCTION(bsc), + SH_PFC_FUNCTION(ceu), + SH_PFC_FUNCTION(flctl), + SH_PFC_FUNCTION(fsia), + SH_PFC_FUNCTION(fsib), + SH_PFC_FUNCTION(hdmi), + SH_PFC_FUNCTION(intc), + SH_PFC_FUNCTION(keysc), + SH_PFC_FUNCTION(lcd), SH_PFC_FUNCTION(mmc0), + SH_PFC_FUNCTION(scifa0), + SH_PFC_FUNCTION(scifa1), + SH_PFC_FUNCTION(scifa2), + SH_PFC_FUNCTION(scifa3), + SH_PFC_FUNCTION(scifa4), + SH_PFC_FUNCTION(scifa5), + SH_PFC_FUNCTION(scifb), SH_PFC_FUNCTION(sdhi0), SH_PFC_FUNCTION(sdhi1), SH_PFC_FUNCTION(sdhi2), + SH_PFC_FUNCTION(usb0), + SH_PFC_FUNCTION(usb1), }; -#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins) - -static const struct pinmux_func pinmux_func_gpios[] = { - /* IRQ */ - GPIO_FN(IRQ0_6), GPIO_FN(IRQ0_162), GPIO_FN(IRQ1), - GPIO_FN(IRQ2_4), GPIO_FN(IRQ2_5), GPIO_FN(IRQ3_8), - GPIO_FN(IRQ3_16), GPIO_FN(IRQ4_17), GPIO_FN(IRQ4_163), - GPIO_FN(IRQ5), GPIO_FN(IRQ6_39), GPIO_FN(IRQ6_164), - GPIO_FN(IRQ7_40), GPIO_FN(IRQ7_167), GPIO_FN(IRQ8_41), - GPIO_FN(IRQ8_168), GPIO_FN(IRQ9_42), GPIO_FN(IRQ9_169), - GPIO_FN(IRQ10), GPIO_FN(IRQ11), GPIO_FN(IRQ12_80), - GPIO_FN(IRQ12_137), GPIO_FN(IRQ13_81), GPIO_FN(IRQ13_145), - GPIO_FN(IRQ14_82), GPIO_FN(IRQ14_146), GPIO_FN(IRQ15_83), - GPIO_FN(IRQ15_147), GPIO_FN(IRQ16_84), GPIO_FN(IRQ16_170), - GPIO_FN(IRQ17), GPIO_FN(IRQ18), GPIO_FN(IRQ19), - GPIO_FN(IRQ20), GPIO_FN(IRQ21), GPIO_FN(IRQ22), - GPIO_FN(IRQ23), GPIO_FN(IRQ24), GPIO_FN(IRQ25), - GPIO_FN(IRQ26_121), GPIO_FN(IRQ26_172), GPIO_FN(IRQ27_122), - GPIO_FN(IRQ27_180), GPIO_FN(IRQ28_123), GPIO_FN(IRQ28_181), - GPIO_FN(IRQ29_129), GPIO_FN(IRQ29_182), GPIO_FN(IRQ30_130), - GPIO_FN(IRQ30_183), GPIO_FN(IRQ31_138), GPIO_FN(IRQ31_184), - - /* MSIOF0 */ - GPIO_FN(MSIOF0_TSYNC), GPIO_FN(MSIOF0_TSCK), GPIO_FN(MSIOF0_RXD), - GPIO_FN(MSIOF0_RSCK), GPIO_FN(MSIOF0_RSYNC), GPIO_FN(MSIOF0_MCK0), - GPIO_FN(MSIOF0_MCK1), GPIO_FN(MSIOF0_SS1), GPIO_FN(MSIOF0_SS2), - GPIO_FN(MSIOF0_TXD), - - /* MSIOF1 */ - GPIO_FN(MSIOF1_TSCK_39), GPIO_FN(MSIOF1_TSCK_88), - GPIO_FN(MSIOF1_TSYNC_40), GPIO_FN(MSIOF1_TSYNC_89), - GPIO_FN(MSIOF1_TXD_41), GPIO_FN(MSIOF1_TXD_90), - GPIO_FN(MSIOF1_RXD_42), GPIO_FN(MSIOF1_RXD_91), - GPIO_FN(MSIOF1_SS1_43), GPIO_FN(MSIOF1_SS1_92), - GPIO_FN(MSIOF1_SS2_44), GPIO_FN(MSIOF1_SS2_93), - GPIO_FN(MSIOF1_RSCK), GPIO_FN(MSIOF1_RSYNC), - GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1), - - /* MSIOF2 */ - GPIO_FN(MSIOF2_RSCK), GPIO_FN(MSIOF2_RSYNC), GPIO_FN(MSIOF2_MCK0), - GPIO_FN(MSIOF2_MCK1), GPIO_FN(MSIOF2_SS1), GPIO_FN(MSIOF2_SS2), - GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_TSCK), GPIO_FN(MSIOF2_RXD), - GPIO_FN(MSIOF2_TXD), - - /* BBIF1 */ - GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TSYNC), GPIO_FN(BBIF1_TSCK), - GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC), - GPIO_FN(BBIF1_FLOW), GPIO_FN(BB_RX_FLOW_N), - - /* BBIF2 */ - GPIO_FN(BBIF2_TSCK1), GPIO_FN(BBIF2_TSYNC1), - GPIO_FN(BBIF2_TXD1), GPIO_FN(BBIF2_RXD), - - /* FSI */ - GPIO_FN(FSIACK), GPIO_FN(FSIBCK), GPIO_FN(FSIAILR), - GPIO_FN(FSIAIBT), GPIO_FN(FSIAISLD), GPIO_FN(FSIAOMC), - GPIO_FN(FSIAOLR), GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), - GPIO_FN(FSIASPDIF_11), GPIO_FN(FSIASPDIF_15), - - /* FMSI */ - GPIO_FN(FMSOCK), GPIO_FN(FMSOOLR), GPIO_FN(FMSIOLR), - GPIO_FN(FMSOOBT), GPIO_FN(FMSIOBT), GPIO_FN(FMSOSLD), - GPIO_FN(FMSOILR), GPIO_FN(FMSIILR), GPIO_FN(FMSOIBT), - GPIO_FN(FMSIIBT), GPIO_FN(FMSISLD), GPIO_FN(FMSICK), - - /* SCIFA0 */ - GPIO_FN(SCIFA0_TXD), GPIO_FN(SCIFA0_RXD), GPIO_FN(SCIFA0_SCK), - GPIO_FN(SCIFA0_RTS), GPIO_FN(SCIFA0_CTS), - - /* SCIFA1 */ - GPIO_FN(SCIFA1_TXD), GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_SCK), - GPIO_FN(SCIFA1_RTS), GPIO_FN(SCIFA1_CTS), - - /* SCIFA2 */ - GPIO_FN(SCIFA2_CTS1), GPIO_FN(SCIFA2_RTS1), GPIO_FN(SCIFA2_TXD1), - GPIO_FN(SCIFA2_RXD1), GPIO_FN(SCIFA2_SCK1), - - /* SCIFA3 */ - GPIO_FN(SCIFA3_CTS_43), GPIO_FN(SCIFA3_CTS_140), - GPIO_FN(SCIFA3_RTS_44), GPIO_FN(SCIFA3_RTS_141), - GPIO_FN(SCIFA3_SCK), GPIO_FN(SCIFA3_TXD), - GPIO_FN(SCIFA3_RXD), - - /* SCIFA4 */ - GPIO_FN(SCIFA4_RXD), GPIO_FN(SCIFA4_TXD), - - /* SCIFA5 */ - GPIO_FN(SCIFA5_RXD), GPIO_FN(SCIFA5_TXD), - - /* SCIFB */ - GPIO_FN(SCIFB_SCK), GPIO_FN(SCIFB_RTS), GPIO_FN(SCIFB_CTS), - GPIO_FN(SCIFB_TXD), GPIO_FN(SCIFB_RXD), - - /* CEU */ - GPIO_FN(VIO_HD), GPIO_FN(VIO_CKO1), GPIO_FN(VIO_CKO2), - GPIO_FN(VIO_VD), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD), - GPIO_FN(VIO_CKO), GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), - GPIO_FN(VIO_D2), GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), - GPIO_FN(VIO_D5), GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), - GPIO_FN(VIO_D8), GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), - GPIO_FN(VIO_D11), GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), - GPIO_FN(VIO_D14), GPIO_FN(VIO_D15), - - /* USB0 */ - GPIO_FN(IDIN_0), GPIO_FN(EXTLP_0), GPIO_FN(OVCN2_0), - GPIO_FN(PWEN_0), GPIO_FN(OVCN_0), GPIO_FN(VBUS0_0), - - /* USB1 */ - GPIO_FN(IDIN_1_18), GPIO_FN(IDIN_1_113), - GPIO_FN(OVCN_1_114), GPIO_FN(OVCN_1_162), - GPIO_FN(PWEN_1_115), GPIO_FN(PWEN_1_138), - GPIO_FN(EXTLP_1), GPIO_FN(OVCN2_1), - GPIO_FN(VBUS0_1), - - /* GPIO */ - GPIO_FN(GPI0), GPIO_FN(GPI1), GPIO_FN(GPO0), GPIO_FN(GPO1), - - /* BSC */ - GPIO_FN(BS), GPIO_FN(WE1), GPIO_FN(CKO), - GPIO_FN(WAIT), GPIO_FN(RDWR), - - GPIO_FN(A0), GPIO_FN(A1), GPIO_FN(A2), - GPIO_FN(A3), GPIO_FN(A6), GPIO_FN(A7), - GPIO_FN(A8), GPIO_FN(A9), GPIO_FN(A10), - GPIO_FN(A11), GPIO_FN(A12), GPIO_FN(A13), - GPIO_FN(A14), GPIO_FN(A15), GPIO_FN(A16), - GPIO_FN(A17), GPIO_FN(A18), GPIO_FN(A19), - GPIO_FN(A20), GPIO_FN(A21), GPIO_FN(A22), - GPIO_FN(A23), GPIO_FN(A24), GPIO_FN(A25), - GPIO_FN(A26), - - GPIO_FN(CS0), GPIO_FN(CS2), GPIO_FN(CS4), - GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(CS6A), - - /* BSC/FLCTL */ - GPIO_FN(RD_FSC), GPIO_FN(WE0_FWE), GPIO_FN(A4_FOE), - GPIO_FN(A5_FCDE), GPIO_FN(D0_NAF0), GPIO_FN(D1_NAF1), - GPIO_FN(D2_NAF2), GPIO_FN(D3_NAF3), GPIO_FN(D4_NAF4), - GPIO_FN(D5_NAF5), GPIO_FN(D6_NAF6), GPIO_FN(D7_NAF7), - GPIO_FN(D8_NAF8), GPIO_FN(D9_NAF9), GPIO_FN(D10_NAF10), - GPIO_FN(D11_NAF11), GPIO_FN(D12_NAF12), GPIO_FN(D13_NAF13), - GPIO_FN(D14_NAF14), GPIO_FN(D15_NAF15), - - /* SPU2 */ - GPIO_FN(VINT_I), - - /* FLCTL */ - GPIO_FN(FCE1), GPIO_FN(FCE0), GPIO_FN(FRB), - - /* HSI */ - GPIO_FN(GP_RX_FLAG), GPIO_FN(GP_RX_DATA), GPIO_FN(GP_TX_READY), - GPIO_FN(GP_RX_WAKE), GPIO_FN(MP_TX_FLAG), GPIO_FN(MP_TX_DATA), - GPIO_FN(MP_RX_READY), GPIO_FN(MP_TX_WAKE), - - /* MFI */ - GPIO_FN(MFIv6), - GPIO_FN(MFIv4), - - GPIO_FN(MEMC_BUSCLK_MEMC_A0), GPIO_FN(MEMC_ADV_MEMC_DREQ0), - GPIO_FN(MEMC_WAIT_MEMC_DREQ1), GPIO_FN(MEMC_CS1_MEMC_A1), - GPIO_FN(MEMC_CS0), GPIO_FN(MEMC_NOE), - GPIO_FN(MEMC_NWE), GPIO_FN(MEMC_INT), - - GPIO_FN(MEMC_AD0), GPIO_FN(MEMC_AD1), GPIO_FN(MEMC_AD2), - GPIO_FN(MEMC_AD3), GPIO_FN(MEMC_AD4), GPIO_FN(MEMC_AD5), - GPIO_FN(MEMC_AD6), GPIO_FN(MEMC_AD7), GPIO_FN(MEMC_AD8), - GPIO_FN(MEMC_AD9), GPIO_FN(MEMC_AD10), GPIO_FN(MEMC_AD11), - GPIO_FN(MEMC_AD12), GPIO_FN(MEMC_AD13), GPIO_FN(MEMC_AD14), - GPIO_FN(MEMC_AD15), - - /* SIM */ - GPIO_FN(SIM_RST), GPIO_FN(SIM_CLK), GPIO_FN(SIM_D), - - /* TPU */ - GPIO_FN(TPU0TO0), GPIO_FN(TPU0TO1), GPIO_FN(TPU0TO2_93), - GPIO_FN(TPU0TO2_99), GPIO_FN(TPU0TO3), - - /* I2C2 */ - GPIO_FN(I2C_SCL2), GPIO_FN(I2C_SDA2), - - /* I2C3(1) */ - GPIO_FN(I2C_SCL3), GPIO_FN(I2C_SDA3), - - /* I2C3(2) */ - GPIO_FN(I2C_SCL3S), GPIO_FN(I2C_SDA3S), - - /* I2C4(2) */ - GPIO_FN(I2C_SCL4), GPIO_FN(I2C_SDA4), - - /* I2C4(2) */ - GPIO_FN(I2C_SCL4S), GPIO_FN(I2C_SDA4S), - - /* KEYSC */ - GPIO_FN(KEYOUT0), GPIO_FN(KEYIN0_121), GPIO_FN(KEYIN0_136), - GPIO_FN(KEYOUT1), GPIO_FN(KEYIN1_122), GPIO_FN(KEYIN1_135), - GPIO_FN(KEYOUT2), GPIO_FN(KEYIN2_123), GPIO_FN(KEYIN2_134), - GPIO_FN(KEYOUT3), GPIO_FN(KEYIN3_124), GPIO_FN(KEYIN3_133), - GPIO_FN(KEYOUT4), GPIO_FN(KEYIN4), GPIO_FN(KEYOUT5), - GPIO_FN(KEYIN5), GPIO_FN(KEYOUT6), GPIO_FN(KEYIN6), - GPIO_FN(KEYOUT7), GPIO_FN(KEYIN7), - - /* LCDC */ - GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDVSYN), - GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(LCDRD), - GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(LCDLCLK), - GPIO_FN(LCDDON), - - GPIO_FN(LCDD0), GPIO_FN(LCDD1), GPIO_FN(LCDD2), - GPIO_FN(LCDD3), GPIO_FN(LCDD4), GPIO_FN(LCDD5), - GPIO_FN(LCDD6), GPIO_FN(LCDD7), GPIO_FN(LCDD8), - GPIO_FN(LCDD9), GPIO_FN(LCDD10), GPIO_FN(LCDD11), - GPIO_FN(LCDD12), GPIO_FN(LCDD13), GPIO_FN(LCDD14), - GPIO_FN(LCDD15), GPIO_FN(LCDD16), GPIO_FN(LCDD17), - GPIO_FN(LCDD18), GPIO_FN(LCDD19), GPIO_FN(LCDD20), - GPIO_FN(LCDD21), GPIO_FN(LCDD22), GPIO_FN(LCDD23), - - GPIO_FN(LCDC0_SELECT), - GPIO_FN(LCDC1_SELECT), - - /* IRDA */ - GPIO_FN(IRDA_OUT), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL), - GPIO_FN(IROUT_139), GPIO_FN(IROUT_140), - - /* TSIF1 */ - GPIO_FN(TS0_1SELECT), - GPIO_FN(TS0_2SELECT), - GPIO_FN(TS1_1SELECT), - GPIO_FN(TS1_2SELECT), - - GPIO_FN(TS_SPSYNC1), GPIO_FN(TS_SDAT1), - GPIO_FN(TS_SDEN1), GPIO_FN(TS_SCK1), - - /* TSIF2 */ - GPIO_FN(TS_SPSYNC2), GPIO_FN(TS_SDAT2), - GPIO_FN(TS_SDEN2), GPIO_FN(TS_SCK2), - - /* HDMI */ - GPIO_FN(HDMI_HPD), GPIO_FN(HDMI_CEC), - - /* SDENC */ - GPIO_FN(SDENC_CPG), - GPIO_FN(SDENC_DV_CLKI), -}; +#undef PORTCR +#define PORTCR(nr, reg) \ + { \ + PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \ + _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT), \ + PORT##nr##_FN0, PORT##nr##_FN1, \ + PORT##nr##_FN2, PORT##nr##_FN3, \ + PORT##nr##_FN4, PORT##nr##_FN5, \ + PORT##nr##_FN6, PORT##nr##_FN7 } \ + } static const struct pinmux_cfg_reg pinmux_config_regs[] = { PORTCR(0, 0xE6051000), /* PORT0CR */ @@ -1776,45 +2546,114 @@ static const struct pinmux_data_reg pinmux_data_regs[] = { #define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) #define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) static const struct pinmux_irq pinmux_irqs[] = { - PINMUX_IRQ(EXT_IRQ16L(0), GPIO_PORT6, GPIO_PORT162), - PINMUX_IRQ(EXT_IRQ16L(1), GPIO_PORT12), - PINMUX_IRQ(EXT_IRQ16L(2), GPIO_PORT4, GPIO_PORT5), - PINMUX_IRQ(EXT_IRQ16L(3), GPIO_PORT8, GPIO_PORT16), - PINMUX_IRQ(EXT_IRQ16L(4), GPIO_PORT17, GPIO_PORT163), - PINMUX_IRQ(EXT_IRQ16L(5), GPIO_PORT18), - PINMUX_IRQ(EXT_IRQ16L(6), GPIO_PORT39, GPIO_PORT164), - PINMUX_IRQ(EXT_IRQ16L(7), GPIO_PORT40, GPIO_PORT167), - PINMUX_IRQ(EXT_IRQ16L(8), GPIO_PORT41, GPIO_PORT168), - PINMUX_IRQ(EXT_IRQ16L(9), GPIO_PORT42, GPIO_PORT169), - PINMUX_IRQ(EXT_IRQ16L(10), GPIO_PORT65), - PINMUX_IRQ(EXT_IRQ16L(11), GPIO_PORT67), - PINMUX_IRQ(EXT_IRQ16L(12), GPIO_PORT80, GPIO_PORT137), - PINMUX_IRQ(EXT_IRQ16L(13), GPIO_PORT81, GPIO_PORT145), - PINMUX_IRQ(EXT_IRQ16L(14), GPIO_PORT82, GPIO_PORT146), - PINMUX_IRQ(EXT_IRQ16L(15), GPIO_PORT83, GPIO_PORT147), - PINMUX_IRQ(EXT_IRQ16H(16), GPIO_PORT84, GPIO_PORT170), - PINMUX_IRQ(EXT_IRQ16H(17), GPIO_PORT85), - PINMUX_IRQ(EXT_IRQ16H(18), GPIO_PORT86), - PINMUX_IRQ(EXT_IRQ16H(19), GPIO_PORT87), - PINMUX_IRQ(EXT_IRQ16H(20), GPIO_PORT92), - PINMUX_IRQ(EXT_IRQ16H(21), GPIO_PORT93), - PINMUX_IRQ(EXT_IRQ16H(22), GPIO_PORT94), - PINMUX_IRQ(EXT_IRQ16H(23), GPIO_PORT95), - PINMUX_IRQ(EXT_IRQ16H(24), GPIO_PORT112), - PINMUX_IRQ(EXT_IRQ16H(25), GPIO_PORT119), - PINMUX_IRQ(EXT_IRQ16H(26), GPIO_PORT121, GPIO_PORT172), - PINMUX_IRQ(EXT_IRQ16H(27), GPIO_PORT122, GPIO_PORT180), - PINMUX_IRQ(EXT_IRQ16H(28), GPIO_PORT123, GPIO_PORT181), - PINMUX_IRQ(EXT_IRQ16H(29), GPIO_PORT129, GPIO_PORT182), - PINMUX_IRQ(EXT_IRQ16H(30), GPIO_PORT130, GPIO_PORT183), - PINMUX_IRQ(EXT_IRQ16H(31), GPIO_PORT138, GPIO_PORT184), + PINMUX_IRQ(EXT_IRQ16L(0), 6, 162), + PINMUX_IRQ(EXT_IRQ16L(1), 12), + PINMUX_IRQ(EXT_IRQ16L(2), 4, 5), + PINMUX_IRQ(EXT_IRQ16L(3), 8, 16), + PINMUX_IRQ(EXT_IRQ16L(4), 17, 163), + PINMUX_IRQ(EXT_IRQ16L(5), 18), + PINMUX_IRQ(EXT_IRQ16L(6), 39, 164), + PINMUX_IRQ(EXT_IRQ16L(7), 40, 167), + PINMUX_IRQ(EXT_IRQ16L(8), 41, 168), + PINMUX_IRQ(EXT_IRQ16L(9), 42, 169), + PINMUX_IRQ(EXT_IRQ16L(10), 65), + PINMUX_IRQ(EXT_IRQ16L(11), 67), + PINMUX_IRQ(EXT_IRQ16L(12), 80, 137), + PINMUX_IRQ(EXT_IRQ16L(13), 81, 145), + PINMUX_IRQ(EXT_IRQ16L(14), 82, 146), + PINMUX_IRQ(EXT_IRQ16L(15), 83, 147), + PINMUX_IRQ(EXT_IRQ16H(16), 84, 170), + PINMUX_IRQ(EXT_IRQ16H(17), 85), + PINMUX_IRQ(EXT_IRQ16H(18), 86), + PINMUX_IRQ(EXT_IRQ16H(19), 87), + PINMUX_IRQ(EXT_IRQ16H(20), 92), + PINMUX_IRQ(EXT_IRQ16H(21), 93), + PINMUX_IRQ(EXT_IRQ16H(22), 94), + PINMUX_IRQ(EXT_IRQ16H(23), 95), + PINMUX_IRQ(EXT_IRQ16H(24), 112), + PINMUX_IRQ(EXT_IRQ16H(25), 119), + PINMUX_IRQ(EXT_IRQ16H(26), 121, 172), + PINMUX_IRQ(EXT_IRQ16H(27), 122, 180), + PINMUX_IRQ(EXT_IRQ16H(28), 123, 181), + PINMUX_IRQ(EXT_IRQ16H(29), 129, 182), + PINMUX_IRQ(EXT_IRQ16H(30), 130, 183), + PINMUX_IRQ(EXT_IRQ16H(31), 138, 184), +}; + +#define PORTnCR_PULMD_OFF (0 << 6) +#define PORTnCR_PULMD_DOWN (2 << 6) +#define PORTnCR_PULMD_UP (3 << 6) +#define PORTnCR_PULMD_MASK (3 << 6) + +struct sh7372_portcr_group { + unsigned int end_pin; + unsigned int offset; +}; + +static const struct sh7372_portcr_group sh7372_portcr_offsets[] = { + { 45, 0x1000 }, { 75, 0x2000 }, { 99, 0x0000 }, { 120, 0x3000 }, + { 151, 0x0000 }, { 155, 0x3000 }, { 166, 0x0000 }, { 190, 0x2000 }, +}; + +static void __iomem *sh7372_pinmux_portcr(struct sh_pfc *pfc, unsigned int pin) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(sh7372_portcr_offsets); ++i) { + const struct sh7372_portcr_group *group = + &sh7372_portcr_offsets[i]; + + if (i <= group->end_pin) + return pfc->window->virt + group->offset + pin; + } + + return NULL; +} + +static unsigned int sh7372_pinmux_get_bias(struct sh_pfc *pfc, unsigned int pin) +{ + void __iomem *addr = sh7372_pinmux_portcr(pfc, pin); + u32 value = ioread8(addr) & PORTnCR_PULMD_MASK; + + switch (value) { + case PORTnCR_PULMD_UP: + return PIN_CONFIG_BIAS_PULL_UP; + case PORTnCR_PULMD_DOWN: + return PIN_CONFIG_BIAS_PULL_DOWN; + case PORTnCR_PULMD_OFF: + default: + return PIN_CONFIG_BIAS_DISABLE; + } +} + +static void sh7372_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin, + unsigned int bias) +{ + void __iomem *addr = sh7372_pinmux_portcr(pfc, pin); + u32 value = ioread8(addr) & ~PORTnCR_PULMD_MASK; + + switch (bias) { + case PIN_CONFIG_BIAS_PULL_UP: + value |= PORTnCR_PULMD_UP; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + value |= PORTnCR_PULMD_DOWN; + break; + } + + iowrite8(value, addr); +} + +static const struct sh_pfc_soc_operations sh7372_pinmux_ops = { + .get_bias = sh7372_pinmux_get_bias, + .set_bias = sh7372_pinmux_set_bias, }; const struct sh_pfc_soc_info sh7372_pinmux_info = { .name = "sh7372_pfc", + .ops = &sh7372_pinmux_ops, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, @@ -1825,9 +2664,6 @@ const struct sh_pfc_soc_info sh7372_pinmux_info = { .functions = pinmux_functions, .nr_functions = ARRAY_SIZE(pinmux_functions), - .func_gpios = pinmux_func_gpios, - .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios), - .cfg_regs = pinmux_config_regs, .data_regs = pinmux_data_regs, diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c index 587f7772abf..7956df58d75 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c @@ -20,9 +20,12 @@ */ #include <linux/io.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/slab.h> -#include <mach/sh73a0.h> #include <mach/irqs.h> #include "core.h" @@ -2538,6 +2541,157 @@ static const unsigned int sdhi2_ctrl_pins[] = { static const unsigned int sdhi2_ctrl_mux[] = { SDHICMD2_MARK, SDHICLK2_MARK, }; +/* - TPU0 ------------------------------------------------------------------- */ +static const unsigned int tpu0_to0_pins[] = { + /* TO */ + 55, +}; +static const unsigned int tpu0_to0_mux[] = { + TPU0TO0_MARK, +}; +static const unsigned int tpu0_to1_pins[] = { + /* TO */ + 59, +}; +static const unsigned int tpu0_to1_mux[] = { + TPU0TO1_MARK, +}; +static const unsigned int tpu0_to2_pins[] = { + /* TO */ + 140, +}; +static const unsigned int tpu0_to2_mux[] = { + TPU0TO2_MARK, +}; +static const unsigned int tpu0_to3_pins[] = { + /* TO */ + 141, +}; +static const unsigned int tpu0_to3_mux[] = { + TPU0TO3_MARK, +}; +/* - TPU1 ------------------------------------------------------------------- */ +static const unsigned int tpu1_to0_pins[] = { + /* TO */ + 246, +}; +static const unsigned int tpu1_to0_mux[] = { + TPU1TO0_MARK, +}; +static const unsigned int tpu1_to1_0_pins[] = { + /* TO */ + 28, +}; +static const unsigned int tpu1_to1_0_mux[] = { + PORT28_TPU1TO1_MARK, +}; +static const unsigned int tpu1_to1_1_pins[] = { + /* TO */ + 29, +}; +static const unsigned int tpu1_to1_1_mux[] = { + PORT29_TPU1TO1_MARK, +}; +static const unsigned int tpu1_to2_pins[] = { + /* TO */ + 153, +}; +static const unsigned int tpu1_to2_mux[] = { + TPU1TO2_MARK, +}; +static const unsigned int tpu1_to3_pins[] = { + /* TO */ + 145, +}; +static const unsigned int tpu1_to3_mux[] = { + TPU1TO3_MARK, +}; +/* - TPU2 ------------------------------------------------------------------- */ +static const unsigned int tpu2_to0_pins[] = { + /* TO */ + 248, +}; +static const unsigned int tpu2_to0_mux[] = { + TPU2TO0_MARK, +}; +static const unsigned int tpu2_to1_pins[] = { + /* TO */ + 197, +}; +static const unsigned int tpu2_to1_mux[] = { + TPU2TO1_MARK, +}; +static const unsigned int tpu2_to2_pins[] = { + /* TO */ + 50, +}; +static const unsigned int tpu2_to2_mux[] = { + TPU2TO2_MARK, +}; +static const unsigned int tpu2_to3_pins[] = { + /* TO */ + 51, +}; +static const unsigned int tpu2_to3_mux[] = { + TPU2TO3_MARK, +}; +/* - TPU3 ------------------------------------------------------------------- */ +static const unsigned int tpu3_to0_pins[] = { + /* TO */ + 163, +}; +static const unsigned int tpu3_to0_mux[] = { + TPU3TO0_MARK, +}; +static const unsigned int tpu3_to1_pins[] = { + /* TO */ + 247, +}; +static const unsigned int tpu3_to1_mux[] = { + TPU3TO1_MARK, +}; +static const unsigned int tpu3_to2_pins[] = { + /* TO */ + 54, +}; +static const unsigned int tpu3_to2_mux[] = { + TPU3TO2_MARK, +}; +static const unsigned int tpu3_to3_pins[] = { + /* TO */ + 53, +}; +static const unsigned int tpu3_to3_mux[] = { + TPU3TO3_MARK, +}; +/* - TPU4 ------------------------------------------------------------------- */ +static const unsigned int tpu4_to0_pins[] = { + /* TO */ + 241, +}; +static const unsigned int tpu4_to0_mux[] = { + TPU4TO0_MARK, +}; +static const unsigned int tpu4_to1_pins[] = { + /* TO */ + 199, +}; +static const unsigned int tpu4_to1_mux[] = { + TPU4TO1_MARK, +}; +static const unsigned int tpu4_to2_pins[] = { + /* TO */ + 58, +}; +static const unsigned int tpu4_to2_mux[] = { + TPU4TO2_MARK, +}; +static const unsigned int tpu4_to3_pins[] = { + /* TO */ +}; +static const unsigned int tpu4_to3_mux[] = { + TPU4TO3_MARK, +}; /* - USB -------------------------------------------------------------------- */ static const unsigned int usb_vbus_pins[] = { /* VBUS */ @@ -2689,6 +2843,27 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(sdhi2_data1), SH_PFC_PIN_GROUP(sdhi2_data4), SH_PFC_PIN_GROUP(sdhi2_ctrl), + SH_PFC_PIN_GROUP(tpu0_to0), + SH_PFC_PIN_GROUP(tpu0_to1), + SH_PFC_PIN_GROUP(tpu0_to2), + SH_PFC_PIN_GROUP(tpu0_to3), + SH_PFC_PIN_GROUP(tpu1_to0), + SH_PFC_PIN_GROUP(tpu1_to1_0), + SH_PFC_PIN_GROUP(tpu1_to1_1), + SH_PFC_PIN_GROUP(tpu1_to2), + SH_PFC_PIN_GROUP(tpu1_to3), + SH_PFC_PIN_GROUP(tpu2_to0), + SH_PFC_PIN_GROUP(tpu2_to1), + SH_PFC_PIN_GROUP(tpu2_to2), + SH_PFC_PIN_GROUP(tpu2_to3), + SH_PFC_PIN_GROUP(tpu3_to0), + SH_PFC_PIN_GROUP(tpu3_to1), + SH_PFC_PIN_GROUP(tpu3_to2), + SH_PFC_PIN_GROUP(tpu3_to3), + SH_PFC_PIN_GROUP(tpu4_to0), + SH_PFC_PIN_GROUP(tpu4_to1), + SH_PFC_PIN_GROUP(tpu4_to2), + SH_PFC_PIN_GROUP(tpu4_to3), SH_PFC_PIN_GROUP(usb_vbus), }; @@ -2908,6 +3083,42 @@ static const char * const usb_groups[] = { "usb_vbus", }; +static const char * const tpu0_groups[] = { + "tpu0_to0", + "tpu0_to1", + "tpu0_to2", + "tpu0_to3", +}; + +static const char * const tpu1_groups[] = { + "tpu1_to0", + "tpu1_to1_0", + "tpu1_to1_1", + "tpu1_to2", + "tpu1_to3", +}; + +static const char * const tpu2_groups[] = { + "tpu2_to0", + "tpu2_to1", + "tpu2_to2", + "tpu2_to3", +}; + +static const char * const tpu3_groups[] = { + "tpu3_to0", + "tpu3_to1", + "tpu3_to2", + "tpu3_to3", +}; + +static const char * const tpu4_groups[] = { + "tpu4_to0", + "tpu4_to1", + "tpu4_to2", + "tpu4_to3", +}; + static const struct sh_pfc_function pinmux_functions[] = { SH_PFC_FUNCTION(bsc), SH_PFC_FUNCTION(fsia), @@ -2933,400 +3144,14 @@ static const struct sh_pfc_function pinmux_functions[] = { SH_PFC_FUNCTION(sdhi0), SH_PFC_FUNCTION(sdhi1), SH_PFC_FUNCTION(sdhi2), + SH_PFC_FUNCTION(tpu0), + SH_PFC_FUNCTION(tpu1), + SH_PFC_FUNCTION(tpu2), + SH_PFC_FUNCTION(tpu3), + SH_PFC_FUNCTION(tpu4), SH_PFC_FUNCTION(usb), }; -#define PINMUX_FN_BASE GPIO_FN_GPI0 - -static const struct pinmux_func pinmux_func_gpios[] = { - /* Table 25-1 (Functions 0-7) */ - GPIO_FN(GPI0), - GPIO_FN(GPI1), - GPIO_FN(GPI2), - GPIO_FN(GPI3), - GPIO_FN(GPI4), - GPIO_FN(GPI5), - GPIO_FN(GPI6), - GPIO_FN(GPI7), - GPIO_FN(GPO7), \ - GPIO_FN(MFG0_OUT2), - GPIO_FN(GPO6), \ - GPIO_FN(MFG1_OUT2), - GPIO_FN(GPO5), \ - GPIO_FN(PORT16_VIO_CKOR), - GPIO_FN(PORT19_VIO_CKO2), - GPIO_FN(GPO0), - GPIO_FN(GPO1), - GPIO_FN(GPO2), \ - GPIO_FN(STATUS0), - GPIO_FN(GPO3), \ - GPIO_FN(STATUS1), - GPIO_FN(GPO4), \ - GPIO_FN(STATUS2), - GPIO_FN(VINT), - GPIO_FN(TCKON), - GPIO_FN(XDVFS1), \ - GPIO_FN(MFG0_OUT1), \ - GPIO_FN(PORT27_IROUT), - GPIO_FN(XDVFS2), \ - GPIO_FN(PORT28_TPU1TO1), - GPIO_FN(SIM_RST), \ - GPIO_FN(PORT29_TPU1TO1), - GPIO_FN(SIM_CLK), \ - GPIO_FN(PORT30_VIO_CKOR), - GPIO_FN(SIM_D), \ - GPIO_FN(PORT31_IROUT), - GPIO_FN(XWUP), - GPIO_FN(VACK), - GPIO_FN(XTAL1L), - GPIO_FN(PORT49_IROUT), \ - GPIO_FN(BBIF2_TSYNC2), \ - GPIO_FN(TPU2TO2), \ - - GPIO_FN(BBIF2_TSCK2), \ - GPIO_FN(TPU2TO3), \ - GPIO_FN(BBIF2_TXD2), - GPIO_FN(TPU3TO3), \ - GPIO_FN(TPU3TO2), \ - GPIO_FN(TPU0TO0), - GPIO_FN(A0), \ - GPIO_FN(BS_), - GPIO_FN(A12), \ - GPIO_FN(TPU4TO2), - GPIO_FN(A13), \ - GPIO_FN(TPU0TO1), - GPIO_FN(A14), \ - GPIO_FN(A15), \ - GPIO_FN(A16), \ - GPIO_FN(MSIOF0_SS1), - GPIO_FN(A17), \ - GPIO_FN(MSIOF0_TSYNC), - GPIO_FN(A18), \ - GPIO_FN(MSIOF0_TSCK), - GPIO_FN(A19), \ - GPIO_FN(MSIOF0_TXD), - GPIO_FN(A20), \ - GPIO_FN(MSIOF0_RSCK), - GPIO_FN(A21), \ - GPIO_FN(MSIOF0_RSYNC), - GPIO_FN(A22), \ - GPIO_FN(MSIOF0_MCK0), - GPIO_FN(A23), \ - GPIO_FN(MSIOF0_MCK1), - GPIO_FN(A24), \ - GPIO_FN(MSIOF0_RXD), - GPIO_FN(A25), \ - GPIO_FN(MSIOF0_SS2), - GPIO_FN(A26), \ - GPIO_FN(FCE1_), - GPIO_FN(DACK0), - GPIO_FN(FCE0_), \ - GPIO_FN(WAIT_), \ - GPIO_FN(DREQ0), - GPIO_FN(FRB), - GPIO_FN(CKO), - GPIO_FN(NBRSTOUT_), - GPIO_FN(NBRST_), - GPIO_FN(BBIF2_TXD), - GPIO_FN(BBIF2_RXD), - GPIO_FN(BBIF2_SYNC), - GPIO_FN(BBIF2_SCK), - GPIO_FN(MFG3_IN2), - GPIO_FN(MFG3_IN1), - GPIO_FN(BBIF1_SS2), \ - GPIO_FN(MFG3_OUT1), - GPIO_FN(HSI_RX_DATA), \ - GPIO_FN(BBIF1_RXD), - GPIO_FN(HSI_TX_WAKE), \ - GPIO_FN(BBIF1_TSCK), - GPIO_FN(HSI_TX_DATA), \ - GPIO_FN(BBIF1_TSYNC), - GPIO_FN(HSI_TX_READY), \ - GPIO_FN(BBIF1_TXD), - GPIO_FN(HSI_RX_READY), \ - GPIO_FN(BBIF1_RSCK), \ - GPIO_FN(HSI_RX_WAKE), \ - GPIO_FN(BBIF1_RSYNC), \ - GPIO_FN(HSI_RX_FLAG), \ - GPIO_FN(BBIF1_SS1), \ - GPIO_FN(BBIF1_FLOW), - GPIO_FN(HSI_TX_FLAG), - GPIO_FN(VIO_VD), \ - GPIO_FN(VIO2_VD), \ - - GPIO_FN(VIO_HD), \ - GPIO_FN(VIO2_HD), \ - GPIO_FN(VIO_D0), \ - GPIO_FN(PORT130_MSIOF2_RXD), \ - GPIO_FN(VIO_D1), \ - GPIO_FN(PORT131_MSIOF2_SS1), \ - GPIO_FN(VIO_D2), \ - GPIO_FN(PORT132_MSIOF2_SS2), \ - GPIO_FN(VIO_D3), \ - GPIO_FN(MSIOF2_TSYNC), \ - GPIO_FN(VIO_D4), \ - GPIO_FN(MSIOF2_TXD), \ - GPIO_FN(VIO_D5), \ - GPIO_FN(MSIOF2_TSCK), \ - GPIO_FN(VIO_D6), \ - GPIO_FN(VIO_D7), \ - GPIO_FN(VIO_D8), \ - GPIO_FN(VIO2_D0), \ - GPIO_FN(VIO_D9), \ - GPIO_FN(VIO2_D1), \ - GPIO_FN(VIO_D10), \ - GPIO_FN(TPU0TO2), \ - GPIO_FN(VIO2_D2), \ - GPIO_FN(VIO_D11), \ - GPIO_FN(TPU0TO3), \ - GPIO_FN(VIO2_D3), \ - GPIO_FN(VIO_D12), \ - GPIO_FN(VIO2_D4), \ - GPIO_FN(VIO_D13), \ - GPIO_FN(VIO2_D5), \ - GPIO_FN(VIO_D14), \ - GPIO_FN(VIO2_D6), \ - GPIO_FN(VIO_D15), \ - GPIO_FN(TPU1TO3), \ - GPIO_FN(VIO2_D7), \ - GPIO_FN(VIO_CLK), \ - GPIO_FN(VIO2_CLK), \ - GPIO_FN(VIO_FIELD), \ - GPIO_FN(VIO2_FIELD), \ - GPIO_FN(VIO_CKO), - GPIO_FN(A27), \ - GPIO_FN(MFG0_IN1), \ - GPIO_FN(MFG0_IN2), - GPIO_FN(TS_SPSYNC3), \ - GPIO_FN(MSIOF2_RSCK), - GPIO_FN(TS_SDAT3), \ - GPIO_FN(MSIOF2_RSYNC), - GPIO_FN(TPU1TO2), \ - GPIO_FN(TS_SDEN3), \ - GPIO_FN(PORT153_MSIOF2_SS1), - GPIO_FN(MSIOF2_MCK0), - GPIO_FN(MSIOF2_MCK1), - GPIO_FN(PORT156_MSIOF2_SS2), - GPIO_FN(PORT157_MSIOF2_RXD), - GPIO_FN(DINT_), \ - GPIO_FN(TS_SCK3), - GPIO_FN(NMI), - GPIO_FN(TPU3TO0), - GPIO_FN(BBIF2_TSYNC1), - GPIO_FN(BBIF2_TSCK1), - GPIO_FN(BBIF2_TXD1), - GPIO_FN(MFG2_OUT2), \ - GPIO_FN(TPU2TO1), - GPIO_FN(TPU4TO1), \ - GPIO_FN(MFG4_OUT2), - GPIO_FN(D16), - GPIO_FN(D17), - GPIO_FN(D18), - GPIO_FN(D19), - GPIO_FN(D20), - GPIO_FN(D21), - GPIO_FN(D22), - GPIO_FN(PORT207_MSIOF0L_SS1), \ - GPIO_FN(D23), - GPIO_FN(PORT208_MSIOF0L_SS2), \ - GPIO_FN(D24), - GPIO_FN(D25), - GPIO_FN(DREQ2), \ - GPIO_FN(PORT210_MSIOF0L_SS1), \ - GPIO_FN(D26), - GPIO_FN(PORT211_MSIOF0L_SS2), \ - GPIO_FN(D27), - GPIO_FN(TS_SPSYNC1), \ - GPIO_FN(MSIOF0L_MCK0), \ - GPIO_FN(D28), - GPIO_FN(TS_SDAT1), \ - GPIO_FN(MSIOF0L_MCK1), \ - GPIO_FN(D29), - GPIO_FN(TS_SDEN1), \ - GPIO_FN(MSIOF0L_RSCK), \ - GPIO_FN(D30), - GPIO_FN(TS_SCK1), \ - GPIO_FN(MSIOF0L_RSYNC), \ - GPIO_FN(D31), - GPIO_FN(DACK2), \ - GPIO_FN(MSIOF0L_TSYNC), \ - GPIO_FN(VIO2_FIELD3), \ - GPIO_FN(DACK3), \ - GPIO_FN(PORT218_VIO_CKOR), - GPIO_FN(DREQ3), \ - GPIO_FN(MSIOF0L_TSCK), \ - GPIO_FN(VIO2_CLK3), \ - GPIO_FN(DREQ1), \ - GPIO_FN(PWEN), \ - GPIO_FN(MSIOF0L_RXD), \ - GPIO_FN(VIO2_HD3), \ - GPIO_FN(DACK1), \ - GPIO_FN(OVCN), \ - GPIO_FN(MSIOF0L_TXD), \ - GPIO_FN(VIO2_VD3), \ - - GPIO_FN(OVCN2), - GPIO_FN(EXTLP), \ - GPIO_FN(PORT226_VIO_CKO2), - GPIO_FN(IDIN), - GPIO_FN(MFG1_IN1), - GPIO_FN(MSIOF1_TXD), \ - GPIO_FN(MSIOF1_TSYNC), \ - GPIO_FN(MSIOF1_TSCK), \ - GPIO_FN(MSIOF1_RXD), \ - GPIO_FN(MSIOF1_RSCK), \ - GPIO_FN(VIO2_CLK2), \ - GPIO_FN(MSIOF1_RSYNC), \ - GPIO_FN(MFG1_IN2), \ - GPIO_FN(VIO2_VD2), \ - GPIO_FN(MSIOF1_MCK0), \ - GPIO_FN(MSIOF1_MCK1), \ - GPIO_FN(MSIOF1_SS1), \ - GPIO_FN(VIO2_FIELD2), \ - GPIO_FN(MSIOF1_SS2), \ - GPIO_FN(VIO2_HD2), \ - GPIO_FN(PORT241_IROUT), \ - GPIO_FN(MFG4_OUT1), \ - GPIO_FN(TPU4TO0), - GPIO_FN(MFG4_IN2), - GPIO_FN(PORT243_VIO_CKO2), - GPIO_FN(MFG2_IN1), \ - GPIO_FN(MSIOF2R_RXD), - GPIO_FN(MFG2_IN2), \ - GPIO_FN(MSIOF2R_TXD), - GPIO_FN(MFG1_OUT1), \ - GPIO_FN(TPU1TO0), - GPIO_FN(MFG3_OUT2), \ - GPIO_FN(TPU3TO1), - GPIO_FN(MFG2_OUT1), \ - GPIO_FN(TPU2TO0), \ - GPIO_FN(MSIOF2R_TSCK), - GPIO_FN(PORT249_IROUT), \ - GPIO_FN(MFG4_IN1), \ - GPIO_FN(MSIOF2R_TSYNC), - GPIO_FN(SDHICLK0), - GPIO_FN(SDHICD0), - GPIO_FN(SDHID0_0), - GPIO_FN(SDHID0_1), - GPIO_FN(SDHID0_2), - GPIO_FN(SDHID0_3), - GPIO_FN(SDHICMD0), - GPIO_FN(SDHIWP0), - GPIO_FN(SDHICLK1), - GPIO_FN(SDHID1_0), \ - GPIO_FN(TS_SPSYNC2), - GPIO_FN(SDHID1_1), \ - GPIO_FN(TS_SDAT2), - GPIO_FN(SDHID1_2), \ - GPIO_FN(TS_SDEN2), - GPIO_FN(SDHID1_3), \ - GPIO_FN(TS_SCK2), - GPIO_FN(SDHICMD1), - GPIO_FN(SDHICLK2), - GPIO_FN(SDHID2_0), \ - GPIO_FN(TS_SPSYNC4), - GPIO_FN(SDHID2_1), \ - GPIO_FN(TS_SDAT4), - GPIO_FN(SDHID2_2), \ - GPIO_FN(TS_SDEN4), - GPIO_FN(SDHID2_3), \ - GPIO_FN(TS_SCK4), - GPIO_FN(SDHICMD2), - GPIO_FN(MMCCLK0), - GPIO_FN(MMCD0_0), - GPIO_FN(MMCD0_1), - GPIO_FN(MMCD0_2), - GPIO_FN(MMCD0_3), - GPIO_FN(MMCD0_4), \ - GPIO_FN(TS_SPSYNC5), - GPIO_FN(MMCD0_5), \ - GPIO_FN(TS_SDAT5), - GPIO_FN(MMCD0_6), \ - GPIO_FN(TS_SDEN5), - GPIO_FN(MMCD0_7), \ - GPIO_FN(TS_SCK5), - GPIO_FN(MMCCMD0), - GPIO_FN(RESETOUTS_), \ - GPIO_FN(EXTAL2OUT), - GPIO_FN(MCP_WAIT__MCP_FRB), - GPIO_FN(MCP_CKO), \ - GPIO_FN(MMCCLK1), - GPIO_FN(MCP_D15_MCP_NAF15), - GPIO_FN(MCP_D14_MCP_NAF14), - GPIO_FN(MCP_D13_MCP_NAF13), - GPIO_FN(MCP_D12_MCP_NAF12), - GPIO_FN(MCP_D11_MCP_NAF11), - GPIO_FN(MCP_D10_MCP_NAF10), - GPIO_FN(MCP_D9_MCP_NAF9), - GPIO_FN(MCP_D8_MCP_NAF8), \ - GPIO_FN(MMCCMD1), - GPIO_FN(MCP_D7_MCP_NAF7), \ - GPIO_FN(MMCD1_7), - - GPIO_FN(MCP_D6_MCP_NAF6), \ - GPIO_FN(MMCD1_6), - GPIO_FN(MCP_D5_MCP_NAF5), \ - GPIO_FN(MMCD1_5), - GPIO_FN(MCP_D4_MCP_NAF4), \ - GPIO_FN(MMCD1_4), - GPIO_FN(MCP_D3_MCP_NAF3), \ - GPIO_FN(MMCD1_3), - GPIO_FN(MCP_D2_MCP_NAF2), \ - GPIO_FN(MMCD1_2), - GPIO_FN(MCP_D1_MCP_NAF1), \ - GPIO_FN(MMCD1_1), - GPIO_FN(MCP_D0_MCP_NAF0), \ - GPIO_FN(MMCD1_0), - GPIO_FN(MCP_NBRSTOUT_), - GPIO_FN(MCP_WE0__MCP_FWE), \ - GPIO_FN(MCP_RDWR_MCP_FWE), - - /* MSEL2 special cases */ - GPIO_FN(TSIF2_TS_XX1), - GPIO_FN(TSIF2_TS_XX2), - GPIO_FN(TSIF2_TS_XX3), - GPIO_FN(TSIF2_TS_XX4), - GPIO_FN(TSIF2_TS_XX5), - GPIO_FN(TSIF1_TS_XX1), - GPIO_FN(TSIF1_TS_XX2), - GPIO_FN(TSIF1_TS_XX3), - GPIO_FN(TSIF1_TS_XX4), - GPIO_FN(TSIF1_TS_XX5), - GPIO_FN(TSIF0_TS_XX1), - GPIO_FN(TSIF0_TS_XX2), - GPIO_FN(TSIF0_TS_XX3), - GPIO_FN(TSIF0_TS_XX4), - GPIO_FN(TSIF0_TS_XX5), - GPIO_FN(MST1_TS_XX1), - GPIO_FN(MST1_TS_XX2), - GPIO_FN(MST1_TS_XX3), - GPIO_FN(MST1_TS_XX4), - GPIO_FN(MST1_TS_XX5), - GPIO_FN(MST0_TS_XX1), - GPIO_FN(MST0_TS_XX2), - GPIO_FN(MST0_TS_XX3), - GPIO_FN(MST0_TS_XX4), - GPIO_FN(MST0_TS_XX5), - - /* MSEL3 special cases */ - GPIO_FN(SDHI0_VCCQ_MC0_ON), - GPIO_FN(SDHI0_VCCQ_MC0_OFF), - GPIO_FN(DEBUG_MON_VIO), - GPIO_FN(DEBUG_MON_LCDD), - GPIO_FN(LCDC_LCDC0), - GPIO_FN(LCDC_LCDC1), - - /* MSEL4 special cases */ - GPIO_FN(IRQ9_MEM_INT), - GPIO_FN(IRQ9_MCP_INT), - GPIO_FN(A11), - GPIO_FN(TPU4TO3), - GPIO_FN(RESETA_N_PU_ON), - GPIO_FN(RESETA_N_PU_OFF), - GPIO_FN(EDBGREQ_PD), - GPIO_FN(EDBGREQ_PU), -}; - #undef PORTCR #define PORTCR(nr, reg) \ { \ @@ -3888,6 +3713,92 @@ static const struct pinmux_irq pinmux_irqs[] = { PINMUX_IRQ(EXT_IRQ16L(9), 308), }; +/* ----------------------------------------------------------------------------- + * VCCQ MC0 regulator + */ + +static void sh73a0_vccq_mc0_endisable(struct regulator_dev *reg, bool enable) +{ + struct sh_pfc *pfc = reg->reg_data; + void __iomem *addr = pfc->window[1].virt + 4; + unsigned long flags; + u32 value; + + spin_lock_irqsave(&pfc->lock, flags); + + value = ioread32(addr); + + if (enable) + value |= BIT(28); + else + value &= ~BIT(28); + + iowrite32(value, addr); + + spin_unlock_irqrestore(&pfc->lock, flags); +} + +static int sh73a0_vccq_mc0_enable(struct regulator_dev *reg) +{ + sh73a0_vccq_mc0_endisable(reg, true); + return 0; +} + +static int sh73a0_vccq_mc0_disable(struct regulator_dev *reg) +{ + sh73a0_vccq_mc0_endisable(reg, false); + return 0; +} + +static int sh73a0_vccq_mc0_is_enabled(struct regulator_dev *reg) +{ + struct sh_pfc *pfc = reg->reg_data; + void __iomem *addr = pfc->window[1].virt + 4; + unsigned long flags; + u32 value; + + spin_lock_irqsave(&pfc->lock, flags); + value = ioread32(addr); + spin_unlock_irqrestore(&pfc->lock, flags); + + return !!(value & BIT(28)); +} + +static int sh73a0_vccq_mc0_get_voltage(struct regulator_dev *reg) +{ + return 3300000; +} + +static struct regulator_ops sh73a0_vccq_mc0_ops = { + .enable = sh73a0_vccq_mc0_enable, + .disable = sh73a0_vccq_mc0_disable, + .is_enabled = sh73a0_vccq_mc0_is_enabled, + .get_voltage = sh73a0_vccq_mc0_get_voltage, +}; + +static const struct regulator_desc sh73a0_vccq_mc0_desc = { + .owner = THIS_MODULE, + .name = "vccq_mc0", + .type = REGULATOR_VOLTAGE, + .ops = &sh73a0_vccq_mc0_ops, +}; + +static struct regulator_consumer_supply sh73a0_vccq_mc0_consumers[] = { + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static const struct regulator_init_data sh73a0_vccq_mc0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sh73a0_vccq_mc0_consumers), + .consumer_supplies = sh73a0_vccq_mc0_consumers, +}; + +/* ----------------------------------------------------------------------------- + * Pin bias + */ + #define PORTnCR_PULMD_OFF (0 << 6) #define PORTnCR_PULMD_DOWN (2 << 6) #define PORTnCR_PULMD_UP (3 << 6) @@ -3934,7 +3845,51 @@ static void sh73a0_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin, iowrite8(value, addr); } +/* ----------------------------------------------------------------------------- + * SoC information + */ + +struct sh73a0_pinmux_data { + struct regulator_dev *vccq_mc0; +}; + +static int sh73a0_pinmux_soc_init(struct sh_pfc *pfc) +{ + struct sh73a0_pinmux_data *data; + struct regulator_config cfg = { }; + int ret; + + data = devm_kzalloc(pfc->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + cfg.dev = pfc->dev; + cfg.init_data = &sh73a0_vccq_mc0_init_data; + cfg.driver_data = pfc; + + data->vccq_mc0 = regulator_register(&sh73a0_vccq_mc0_desc, &cfg); + if (IS_ERR(data->vccq_mc0)) { + ret = PTR_ERR(data->vccq_mc0); + dev_err(pfc->dev, "Failed to register VCCQ MC0 regulator: %d\n", + ret); + return ret; + } + + pfc->soc_data = data; + + return 0; +} + +static void sh73a0_pinmux_soc_exit(struct sh_pfc *pfc) +{ + struct sh73a0_pinmux_data *data = pfc->soc_data; + + regulator_unregister(data->vccq_mc0); +} + static const struct sh_pfc_soc_operations sh73a0_pinmux_ops = { + .init = sh73a0_pinmux_soc_init, + .exit = sh73a0_pinmux_soc_exit, .get_bias = sh73a0_pinmux_get_bias, .set_bias = sh73a0_pinmux_set_bias, }; @@ -3956,9 +3911,6 @@ const struct sh_pfc_soc_info sh73a0_pinmux_info = { .functions = pinmux_functions, .nr_functions = ARRAY_SIZE(pinmux_functions), - .func_gpios = pinmux_func_gpios, - .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios), - .cfg_regs = pinmux_config_regs, .data_regs = pinmux_data_regs, diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h index 3b785fc428d..830ae1ffd0b 100644 --- a/drivers/pinctrl/sh-pfc/sh_pfc.h +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h @@ -11,8 +11,8 @@ #ifndef __SH_PFC_H #define __SH_PFC_H +#include <linux/bug.h> #include <linux/stringify.h> -#include <asm-generic/gpio.h> typedef unsigned short pinmux_enum_t; @@ -129,6 +129,8 @@ struct pinmux_range { struct sh_pfc; struct sh_pfc_soc_operations { + int (*init)(struct sh_pfc *pfc); + void (*exit)(struct sh_pfc *pfc); unsigned int (*get_bias)(struct sh_pfc *pfc, unsigned int pin); void (*set_bias)(struct sh_pfc *pfc, unsigned int pin, unsigned int bias); diff --git a/drivers/rtc/rtc-coh901331.c b/drivers/rtc/rtc-coh901331.c index 93c06588ddc..ad6863a76af 100644 --- a/drivers/rtc/rtc-coh901331.c +++ b/drivers/rtc/rtc-coh901331.c @@ -274,11 +274,17 @@ static void coh901331_shutdown(struct platform_device *pdev) clk_disable_unprepare(rtap->clk); } +static const struct of_device_id coh901331_dt_match[] = { + { .compatible = "stericsson,coh901331" }, + {}, +}; + static struct platform_driver coh901331_driver = { .driver = { .name = "rtc-coh901331", .owner = THIS_MODULE, .pm = &coh901331_pm_ops, + .of_match_table = coh901331_dt_match, }, .remove = __exit_p(coh901331_remove), .shutdown = coh901331_shutdown, diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 371cc66f1a0..3b246543282 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2083,6 +2083,7 @@ pl022_platform_data_dt_get(struct device *dev) } pd->bus_id = -1; + pd->enable_dma = 1; of_property_read_u32(np, "num-cs", &tmp); pd->num_chipselect = tmp; of_property_read_u32(np, "pl022,autosuspend-delay", diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index 788b1ddcac6..4cbe3eea6de 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -817,7 +817,8 @@ static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = { #define EXYNOS4210_TMU_DRV_DATA (NULL) #endif -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) || \ + defined(CONFIG_SOC_EXYNOS4212) static struct exynos_tmu_platform_data const exynos_default_tmu_data = { .threshold_falling = 10, .trigger_levels[0] = 85, diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 6c917453042..7e4150aa69c 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/serial_core.h> +#include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/console.h> @@ -139,6 +140,16 @@ #define XUARTPS_SR_RXTRIG 0x00000001 /* Rx Trigger */ /** + * struct xuartps - device data + * @refclk Reference clock + * @aperclk APB clock + */ +struct xuartps { + struct clk *refclk; + struct clk *aperclk; +}; + +/** * xuartps_isr - Interrupt handler * @irq: Irq number * @dev_id: Id of the port @@ -936,34 +947,55 @@ static int xuartps_probe(struct platform_device *pdev) int rc; struct uart_port *port; struct resource *res, *res2; - struct clk *clk; + struct xuartps *xuartps_data; - clk = of_clk_get(pdev->dev.of_node, 0); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "no clock specified\n"); - return PTR_ERR(clk); + xuartps_data = kzalloc(sizeof(*xuartps_data), GFP_KERNEL); + if (!xuartps_data) + return -ENOMEM; + + xuartps_data->aperclk = clk_get(&pdev->dev, "aper_clk"); + if (IS_ERR(xuartps_data->aperclk)) { + dev_err(&pdev->dev, "aper_clk clock not found.\n"); + rc = PTR_ERR(xuartps_data->aperclk); + goto err_out_free; + } + xuartps_data->refclk = clk_get(&pdev->dev, "ref_clk"); + if (IS_ERR(xuartps_data->refclk)) { + dev_err(&pdev->dev, "ref_clk clock not found.\n"); + rc = PTR_ERR(xuartps_data->refclk); + goto err_out_clk_put_aper; } - rc = clk_prepare_enable(clk); + rc = clk_prepare_enable(xuartps_data->aperclk); + if (rc) { + dev_err(&pdev->dev, "Unable to enable APER clock.\n"); + goto err_out_clk_put; + } + rc = clk_prepare_enable(xuartps_data->refclk); if (rc) { - dev_err(&pdev->dev, "could not enable clock\n"); - return -EBUSY; + dev_err(&pdev->dev, "Unable to enable device clock.\n"); + goto err_out_clk_dis_aper; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; + if (!res) { + rc = -ENODEV; + goto err_out_clk_disable; + } res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res2) - return -ENODEV; + if (!res2) { + rc = -ENODEV; + goto err_out_clk_disable; + } /* Initialize the port structure */ port = xuartps_get_port(); if (!port) { dev_err(&pdev->dev, "Cannot get uart_port structure\n"); - return -ENODEV; + rc = -ENODEV; + goto err_out_clk_disable; } else { /* Register the port. * This function also registers this device with the tty layer @@ -972,17 +1004,30 @@ static int xuartps_probe(struct platform_device *pdev) port->mapbase = res->start; port->irq = res2->start; port->dev = &pdev->dev; - port->uartclk = clk_get_rate(clk); - port->private_data = clk; + port->uartclk = clk_get_rate(xuartps_data->refclk); + port->private_data = xuartps_data; platform_set_drvdata(pdev, port); rc = uart_add_one_port(&xuartps_uart_driver, port); if (rc) { dev_err(&pdev->dev, "uart_add_one_port() failed; err=%i\n", rc); - return rc; + goto err_out_clk_disable; } return 0; } + +err_out_clk_disable: + clk_disable_unprepare(xuartps_data->refclk); +err_out_clk_dis_aper: + clk_disable_unprepare(xuartps_data->aperclk); +err_out_clk_put: + clk_put(xuartps_data->refclk); +err_out_clk_put_aper: + clk_put(xuartps_data->aperclk); +err_out_free: + kfree(xuartps_data); + + return rc; } /** @@ -994,13 +1039,17 @@ static int xuartps_probe(struct platform_device *pdev) static int xuartps_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); - struct clk *clk = port->private_data; + struct xuartps *xuartps_data = port->private_data; int rc; /* Remove the xuartps port from the serial core */ rc = uart_remove_one_port(&xuartps_uart_driver, port); port->mapbase = 0; - clk_disable_unprepare(clk); + clk_disable_unprepare(xuartps_data->refclk); + clk_disable_unprepare(xuartps_data->aperclk); + clk_put(xuartps_data->refclk); + clk_put(xuartps_data->aperclk); + kfree(xuartps_data); return rc; } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 7d0aa5f58f7..2817013bceb 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -223,7 +223,7 @@ config USB_EHCI_SH config USB_EHCI_S5P tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" - depends on PLAT_S5P + depends on PLAT_S5P || ARCH_EXYNOS help Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's on-chip EHCI controller. diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 5733f8ed98f..5196d728517 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -48,6 +48,12 @@ static int ehci_platform_reset(struct usb_hcd *hcd) ehci->big_endian_desc = pdata->big_endian_desc; ehci->big_endian_mmio = pdata->big_endian_mmio; + if (pdata->pre_setup) { + retval = pdata->pre_setup(hcd); + if (retval < 0) + return retval; + } + ehci->caps = hcd->regs + pdata->caps_offset; retval = ehci_setup(hcd); if (retval) diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index a5a9552c25a..3622fff8b79 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -186,15 +186,15 @@ config USB_MXS_PHY MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. config USB_RCAR_PHY - tristate "Renesas R-Car USB phy support" + tristate "Renesas R-Car USB PHY support" depends on USB || USB_GADGET help - Say Y here to add support for the Renesas R-Car USB phy driver. - This chip is typically used as USB phy for USB host, gadget. - This driver supports: R8A7779 + Say Y here to add support for the Renesas R-Car USB common PHY driver. + This chip is typically used as USB PHY for USB host, gadget. + This driver supports R8A7778 and R8A7779. To compile this driver as a module, choose M here: the - module will be called rcar-phy. + module will be called phy-rcar-usb. config USB_ULPI bool "Generic ULPI Transceiver Driver" diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c index 23c3dd30b2f..ae909408958 100644 --- a/drivers/usb/phy/phy-rcar-usb.c +++ b/drivers/usb/phy/phy-rcar-usb.c @@ -1,8 +1,9 @@ /* * Renesas R-Car USB phy driver * - * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012-2013 Renesas Solutions Corp. * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * Copyright (C) 2013 Cogent Embedded, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,17 +16,41 @@ #include <linux/platform_device.h> #include <linux/spinlock.h> #include <linux/module.h> - -/* USBH common register */ -#define USBPCTRL0 0x0800 -#define USBPCTRL1 0x0804 -#define USBST 0x0808 -#define USBEH0 0x080C -#define USBOH0 0x081C -#define USBCTL0 0x0858 -#define EIIBC1 0x0094 -#define EIIBC2 0x009C - +#include <linux/platform_data/usb-rcar-phy.h> + +/* REGS block */ +#define USBPCTRL0 0x00 +#define USBPCTRL1 0x04 +#define USBST 0x08 +#define USBEH0 0x0C +#define USBOH0 0x1C +#define USBCTL0 0x58 + +/* High-speed signal quality characteristic control registers (R8A7778 only) */ +#define HSQCTL1 0x24 +#define HSQCTL2 0x28 + +/* USBPCTRL0 */ +#define OVC2 (1 << 10) /* (R8A7779 only) */ + /* Switches the OVC input pin for port 2: */ + /* 1: USB_OVC2, 0: OVC2 */ +#define OVC1_VBUS1 (1 << 9) /* Switches the OVC input pin for port 1: */ + /* 1: USB_OVC1, 0: OVC1/VBUS1 */ + /* Function mode: set to 0 */ +#define OVC0 (1 << 8) /* Switches the OVC input pin for port 0: */ + /* 1: USB_OVC0 pin, 0: OVC0 */ +#define OVC2_ACT (1 << 6) /* (R8A7779 only) */ + /* Host mode: OVC2 polarity: */ + /* 1: active-high, 0: active-low */ +#define PENC (1 << 4) /* Function mode: output level of PENC1 pin: */ + /* 1: high, 0: low */ +#define OVC0_ACT (1 << 3) /* Host mode: OVC0 polarity: */ + /* 1: active-high, 0: active-low */ +#define OVC1_ACT (1 << 1) /* Host mode: OVC1 polarity: */ + /* 1: active-high, 0: active-low */ + /* Function mode: be sure to set to 1 */ +#define PORT1 (1 << 0) /* Selects port 1 mode: */ + /* 1: function, 0: host */ /* USBPCTRL1 */ #define PHY_RST (1 << 2) #define PLL_ENB (1 << 1) @@ -58,8 +83,10 @@ static int rcar_usb_phy_init(struct usb_phy *phy) { struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy); struct device *dev = phy->dev; + struct rcar_phy_platform_data *pdata = dev->platform_data; void __iomem *reg0 = priv->reg0; void __iomem *reg1 = priv->reg1; + static const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT }; int i; u32 val; unsigned long flags; @@ -77,7 +104,16 @@ static int rcar_usb_phy_init(struct usb_phy *phy) /* (2) start USB-PHY internal PLL */ iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1)); - /* (3) USB module status check */ + /* (3) set USB-PHY in accord with the conditions of usage */ + if (reg1) { + u32 hsqctl1 = pdata->ferrite_bead ? 0x41 : 0; + u32 hsqctl2 = pdata->ferrite_bead ? 0x0d : 7; + + iowrite32(hsqctl1, reg1 + HSQCTL1); + iowrite32(hsqctl2, reg1 + HSQCTL2); + } + + /* (4) USB module status check */ for (i = 0; i < 1024; i++) { udelay(10); val = ioread32(reg0 + USBST); @@ -90,24 +126,24 @@ static int rcar_usb_phy_init(struct usb_phy *phy) goto phy_init_end; } - /* (4) USB-PHY reset clear */ + /* (5) USB-PHY reset clear */ iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1)); - /* set platform specific port settings */ - iowrite32(0x00000000, (reg0 + USBPCTRL0)); - - /* - * EHCI IP internal buffer setting - * EHCI IP internal buffer enable - * - * These are recommended value of a datasheet - * see [USB :: EHCI internal buffer setting] - */ - iowrite32(0x00ff0040, (reg0 + EIIBC1)); - iowrite32(0x00ff0040, (reg1 + EIIBC1)); - - iowrite32(0x00000001, (reg0 + EIIBC2)); - iowrite32(0x00000001, (reg1 + EIIBC2)); + /* Board specific port settings */ + val = 0; + if (pdata->port1_func) + val |= PORT1; + if (pdata->penc1) + val |= PENC; + for (i = 0; i < 3; i++) { + /* OVCn bits follow each other in the right order */ + if (pdata->ovc_pin[i].select_3_3v) + val |= OVC0 << i; + /* OVCn_ACT bits are spaced by irregular intervals */ + if (pdata->ovc_pin[i].active_high) + val |= ovcn_act[i]; + } + iowrite32(val, (reg0 + USBPCTRL0)); /* * Bus alignment settings @@ -134,10 +170,8 @@ static void rcar_usb_phy_shutdown(struct usb_phy *phy) spin_lock_irqsave(&priv->lock, flags); - if (priv->counter-- == 1) { /* last user */ - iowrite32(0x00000000, (reg0 + USBPCTRL0)); + if (priv->counter-- == 1) /* last user */ iowrite32(0x00000000, (reg0 + USBPCTRL1)); - } spin_unlock_irqrestore(&priv->lock, flags); } @@ -147,27 +181,29 @@ static int rcar_usb_phy_probe(struct platform_device *pdev) struct rcar_usb_phy_priv *priv; struct resource *res0, *res1; struct device *dev = &pdev->dev; - void __iomem *reg0, *reg1; + void __iomem *reg0, *reg1 = NULL; int ret; + if (!pdev->dev.platform_data) { + dev_err(dev, "No platform data\n"); + return -EINVAL; + } + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); - res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res0 || !res1) { + if (!res0) { dev_err(dev, "Not enough platform resources\n"); return -EINVAL; } - /* - * CAUTION - * - * Because this phy address is also mapped under OHCI/EHCI address area, - * this driver can't use devm_ioremap_resource(dev, res) here - */ - reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0)); - reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1)); - if (!reg0 || !reg1) { - dev_err(dev, "ioremap error\n"); - return -ENOMEM; + reg0 = devm_ioremap_resource(dev, res0); + if (IS_ERR(reg0)) + return PTR_ERR(reg0); + + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res1) { + reg1 = devm_ioremap_resource(dev, res1); + if (IS_ERR(reg1)) + return PTR_ERR(reg1); } priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c index b9b8a8be6f1..4bd070f524e 100644 --- a/drivers/watchdog/coh901327_wdt.c +++ b/drivers/watchdog/coh901327_wdt.c @@ -354,9 +354,9 @@ static int __init coh901327_probe(struct platform_device *pdev) clk_disable(clk); - if (margin < 1 || margin > 327) - margin = 60; - coh901327_wdt.timeout = margin; + ret = watchdog_init_timeout(&coh901327_wdt, margin, &pdev->dev); + if (ret < 0) + coh901327_wdt.timeout = 60; ret = watchdog_register_device(&coh901327_wdt); if (ret == 0) @@ -441,10 +441,16 @@ void coh901327_watchdog_reset(void) /* Return and await doom */ } +static const struct of_device_id coh901327_dt_match[] = { + { .compatible = "stericsson,coh901327" }, + {}, +}; + static struct platform_driver coh901327_driver = { .driver = { .owner = THIS_MODULE, .name = "coh901327_wdog", + .of_match_table = coh901327_dt_match, }, .remove = __exit_p(coh901327_remove), .suspend = coh901327_suspend, diff --git a/include/dt-bindings/clock/imx6sl-clock.h b/include/dt-bindings/clock/imx6sl-clock.h new file mode 100644 index 00000000000..7fcdf90879f --- /dev/null +++ b/include/dt-bindings/clock/imx6sl-clock.h @@ -0,0 +1,148 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX6SL_H +#define __DT_BINDINGS_CLOCK_IMX6SL_H + +#define IMX6SL_CLK_DUMMY 0 +#define IMX6SL_CLK_CKIL 1 +#define IMX6SL_CLK_OSC 2 +#define IMX6SL_CLK_PLL1_SYS 3 +#define IMX6SL_CLK_PLL2_BUS 4 +#define IMX6SL_CLK_PLL3_USB_OTG 5 +#define IMX6SL_CLK_PLL4_AUDIO 6 +#define IMX6SL_CLK_PLL5_VIDEO 7 +#define IMX6SL_CLK_PLL6_ENET 8 +#define IMX6SL_CLK_PLL7_USB_HOST 9 +#define IMX6SL_CLK_USBPHY1 10 +#define IMX6SL_CLK_USBPHY2 11 +#define IMX6SL_CLK_USBPHY1_GATE 12 +#define IMX6SL_CLK_USBPHY2_GATE 13 +#define IMX6SL_CLK_PLL4_POST_DIV 14 +#define IMX6SL_CLK_PLL5_POST_DIV 15 +#define IMX6SL_CLK_PLL5_VIDEO_DIV 16 +#define IMX6SL_CLK_ENET_REF 17 +#define IMX6SL_CLK_PLL2_PFD0 18 +#define IMX6SL_CLK_PLL2_PFD1 19 +#define IMX6SL_CLK_PLL2_PFD2 20 +#define IMX6SL_CLK_PLL3_PFD0 21 +#define IMX6SL_CLK_PLL3_PFD1 22 +#define IMX6SL_CLK_PLL3_PFD2 23 +#define IMX6SL_CLK_PLL3_PFD3 24 +#define IMX6SL_CLK_PLL2_198M 25 +#define IMX6SL_CLK_PLL3_120M 26 +#define IMX6SL_CLK_PLL3_80M 27 +#define IMX6SL_CLK_PLL3_60M 28 +#define IMX6SL_CLK_STEP 29 +#define IMX6SL_CLK_PLL1_SW 30 +#define IMX6SL_CLK_OCRAM_ALT_SEL 31 +#define IMX6SL_CLK_OCRAM_SEL 32 +#define IMX6SL_CLK_PRE_PERIPH2_SEL 33 +#define IMX6SL_CLK_PRE_PERIPH_SEL 34 +#define IMX6SL_CLK_PERIPH2_CLK2_SEL 35 +#define IMX6SL_CLK_PERIPH_CLK2_SEL 36 +#define IMX6SL_CLK_CSI_SEL 37 +#define IMX6SL_CLK_LCDIF_AXI_SEL 38 +#define IMX6SL_CLK_USDHC1_SEL 39 +#define IMX6SL_CLK_USDHC2_SEL 40 +#define IMX6SL_CLK_USDHC3_SEL 41 +#define IMX6SL_CLK_USDHC4_SEL 42 +#define IMX6SL_CLK_SSI1_SEL 43 +#define IMX6SL_CLK_SSI2_SEL 44 +#define IMX6SL_CLK_SSI3_SEL 45 +#define IMX6SL_CLK_PERCLK_SEL 46 +#define IMX6SL_CLK_PXP_AXI_SEL 47 +#define IMX6SL_CLK_EPDC_AXI_SEL 48 +#define IMX6SL_CLK_GPU2D_OVG_SEL 49 +#define IMX6SL_CLK_GPU2D_SEL 50 +#define IMX6SL_CLK_LCDIF_PIX_SEL 51 +#define IMX6SL_CLK_EPDC_PIX_SEL 52 +#define IMX6SL_CLK_SPDIF0_SEL 53 +#define IMX6SL_CLK_SPDIF1_SEL 54 +#define IMX6SL_CLK_EXTERN_AUDIO_SEL 55 +#define IMX6SL_CLK_ECSPI_SEL 56 +#define IMX6SL_CLK_UART_SEL 57 +#define IMX6SL_CLK_PERIPH 58 +#define IMX6SL_CLK_PERIPH2 59 +#define IMX6SL_CLK_OCRAM_PODF 60 +#define IMX6SL_CLK_PERIPH_CLK2_PODF 61 +#define IMX6SL_CLK_PERIPH2_CLK2_PODF 62 +#define IMX6SL_CLK_IPG 63 +#define IMX6SL_CLK_CSI_PODF 64 +#define IMX6SL_CLK_LCDIF_AXI_PODF 65 +#define IMX6SL_CLK_USDHC1_PODF 66 +#define IMX6SL_CLK_USDHC2_PODF 67 +#define IMX6SL_CLK_USDHC3_PODF 68 +#define IMX6SL_CLK_USDHC4_PODF 69 +#define IMX6SL_CLK_SSI1_PRED 70 +#define IMX6SL_CLK_SSI1_PODF 71 +#define IMX6SL_CLK_SSI2_PRED 72 +#define IMX6SL_CLK_SSI2_PODF 73 +#define IMX6SL_CLK_SSI3_PRED 74 +#define IMX6SL_CLK_SSI3_PODF 75 +#define IMX6SL_CLK_PERCLK 76 +#define IMX6SL_CLK_PXP_AXI_PODF 77 +#define IMX6SL_CLK_EPDC_AXI_PODF 78 +#define IMX6SL_CLK_GPU2D_OVG_PODF 79 +#define IMX6SL_CLK_GPU2D_PODF 80 +#define IMX6SL_CLK_LCDIF_PIX_PRED 81 +#define IMX6SL_CLK_EPDC_PIX_PRED 82 +#define IMX6SL_CLK_LCDIF_PIX_PODF 83 +#define IMX6SL_CLK_EPDC_PIX_PODF 84 +#define IMX6SL_CLK_SPDIF0_PRED 85 +#define IMX6SL_CLK_SPDIF0_PODF 86 +#define IMX6SL_CLK_SPDIF1_PRED 87 +#define IMX6SL_CLK_SPDIF1_PODF 88 +#define IMX6SL_CLK_EXTERN_AUDIO_PRED 89 +#define IMX6SL_CLK_EXTERN_AUDIO_PODF 90 +#define IMX6SL_CLK_ECSPI_ROOT 91 +#define IMX6SL_CLK_UART_ROOT 92 +#define IMX6SL_CLK_AHB 93 +#define IMX6SL_CLK_MMDC_ROOT 94 +#define IMX6SL_CLK_ARM 95 +#define IMX6SL_CLK_ECSPI1 96 +#define IMX6SL_CLK_ECSPI2 97 +#define IMX6SL_CLK_ECSPI3 98 +#define IMX6SL_CLK_ECSPI4 99 +#define IMX6SL_CLK_EPIT1 100 +#define IMX6SL_CLK_EPIT2 101 +#define IMX6SL_CLK_EXTERN_AUDIO 102 +#define IMX6SL_CLK_GPT 103 +#define IMX6SL_CLK_GPT_SERIAL 104 +#define IMX6SL_CLK_GPU2D_OVG 105 +#define IMX6SL_CLK_I2C1 106 +#define IMX6SL_CLK_I2C2 107 +#define IMX6SL_CLK_I2C3 108 +#define IMX6SL_CLK_OCOTP 109 +#define IMX6SL_CLK_CSI 110 +#define IMX6SL_CLK_PXP_AXI 111 +#define IMX6SL_CLK_EPDC_AXI 112 +#define IMX6SL_CLK_LCDIF_AXI 113 +#define IMX6SL_CLK_LCDIF_PIX 114 +#define IMX6SL_CLK_EPDC_PIX 115 +#define IMX6SL_CLK_OCRAM 116 +#define IMX6SL_CLK_PWM1 117 +#define IMX6SL_CLK_PWM2 118 +#define IMX6SL_CLK_PWM3 119 +#define IMX6SL_CLK_PWM4 120 +#define IMX6SL_CLK_SDMA 121 +#define IMX6SL_CLK_SPDIF 122 +#define IMX6SL_CLK_SSI1 123 +#define IMX6SL_CLK_SSI2 124 +#define IMX6SL_CLK_SSI3 125 +#define IMX6SL_CLK_UART 126 +#define IMX6SL_CLK_UART_SERIAL 127 +#define IMX6SL_CLK_USBOH3 128 +#define IMX6SL_CLK_USDHC1 129 +#define IMX6SL_CLK_USDHC2 130 +#define IMX6SL_CLK_USDHC3 131 +#define IMX6SL_CLK_USDHC4 132 +#define IMX6SL_CLK_CLK_END 133 + +#endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */ diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h new file mode 100644 index 00000000000..15e997fa78f --- /dev/null +++ b/include/dt-bindings/clock/vf610-clock.h @@ -0,0 +1,163 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DT_BINDINGS_CLOCK_VF610_H +#define __DT_BINDINGS_CLOCK_VF610_H + +#define VF610_CLK_DUMMY 0 +#define VF610_CLK_SIRC_128K 1 +#define VF610_CLK_SIRC_32K 2 +#define VF610_CLK_FIRC 3 +#define VF610_CLK_SXOSC 4 +#define VF610_CLK_FXOSC 5 +#define VF610_CLK_FXOSC_HALF 6 +#define VF610_CLK_SLOW_CLK_SEL 7 +#define VF610_CLK_FASK_CLK_SEL 8 +#define VF610_CLK_AUDIO_EXT 9 +#define VF610_CLK_ENET_EXT 10 +#define VF610_CLK_PLL1_MAIN 11 +#define VF610_CLK_PLL1_PFD1 12 +#define VF610_CLK_PLL1_PFD2 13 +#define VF610_CLK_PLL1_PFD3 14 +#define VF610_CLK_PLL1_PFD4 15 +#define VF610_CLK_PLL2_MAIN 16 +#define VF610_CLK_PLL2_PFD1 17 +#define VF610_CLK_PLL2_PFD2 18 +#define VF610_CLK_PLL2_PFD3 19 +#define VF610_CLK_PLL2_PFD4 20 +#define VF610_CLK_PLL3_MAIN 21 +#define VF610_CLK_PLL3_PFD1 22 +#define VF610_CLK_PLL3_PFD2 23 +#define VF610_CLK_PLL3_PFD3 24 +#define VF610_CLK_PLL3_PFD4 25 +#define VF610_CLK_PLL4_MAIN 26 +#define VF610_CLK_PLL5_MAIN 27 +#define VF610_CLK_PLL6_MAIN 28 +#define VF610_CLK_PLL3_MAIN_DIV 29 +#define VF610_CLK_PLL4_MAIN_DIV 30 +#define VF610_CLK_PLL6_MAIN_DIV 31 +#define VF610_CLK_PLL1_PFD_SEL 32 +#define VF610_CLK_PLL2_PFD_SEL 33 +#define VF610_CLK_SYS_SEL 34 +#define VF610_CLK_DDR_SEL 35 +#define VF610_CLK_SYS_BUS 36 +#define VF610_CLK_PLATFORM_BUS 37 +#define VF610_CLK_IPG_BUS 38 +#define VF610_CLK_UART0 39 +#define VF610_CLK_UART1 40 +#define VF610_CLK_UART2 41 +#define VF610_CLK_UART3 42 +#define VF610_CLK_UART4 43 +#define VF610_CLK_UART5 44 +#define VF610_CLK_PIT 45 +#define VF610_CLK_I2C0 46 +#define VF610_CLK_I2C1 47 +#define VF610_CLK_I2C2 48 +#define VF610_CLK_I2C3 49 +#define VF610_CLK_FTM0_EXT_SEL 50 +#define VF610_CLK_FTM0_FIX_SEL 51 +#define VF610_CLK_FTM0_EXT_FIX_EN 52 +#define VF610_CLK_FTM1_EXT_SEL 53 +#define VF610_CLK_FTM1_FIX_SEL 54 +#define VF610_CLK_FTM1_EXT_FIX_EN 55 +#define VF610_CLK_FTM2_EXT_SEL 56 +#define VF610_CLK_FTM2_FIX_SEL 57 +#define VF610_CLK_FTM2_EXT_FIX_EN 58 +#define VF610_CLK_FTM3_EXT_SEL 59 +#define VF610_CLK_FTM3_FIX_SEL 60 +#define VF610_CLK_FTM3_EXT_FIX_EN 61 +#define VF610_CLK_FTM0 62 +#define VF610_CLK_FTM1 63 +#define VF610_CLK_FTM2 64 +#define VF610_CLK_FTM3 65 +#define VF610_CLK_ENET_50M 66 +#define VF610_CLK_ENET_25M 67 +#define VF610_CLK_ENET_SEL 68 +#define VF610_CLK_ENET 69 +#define VF610_CLK_ENET_TS_SEL 70 +#define VF610_CLK_ENET_TS 71 +#define VF610_CLK_DSPI0 72 +#define VF610_CLK_DSPI1 73 +#define VF610_CLK_DSPI2 74 +#define VF610_CLK_DSPI3 75 +#define VF610_CLK_WDT 76 +#define VF610_CLK_ESDHC0_SEL 77 +#define VF610_CLK_ESDHC0_EN 78 +#define VF610_CLK_ESDHC0_DIV 79 +#define VF610_CLK_ESDHC0 80 +#define VF610_CLK_ESDHC1_SEL 81 +#define VF610_CLK_ESDHC1_EN 82 +#define VF610_CLK_ESDHC1_DIV 83 +#define VF610_CLK_ESDHC1 84 +#define VF610_CLK_DCU0_SEL 85 +#define VF610_CLK_DCU0_EN 86 +#define VF610_CLK_DCU0_DIV 87 +#define VF610_CLK_DCU0 88 +#define VF610_CLK_DCU1_SEL 89 +#define VF610_CLK_DCU1_EN 90 +#define VF610_CLK_DCU1_DIV 91 +#define VF610_CLK_DCU1 92 +#define VF610_CLK_ESAI_SEL 93 +#define VF610_CLK_ESAI_EN 94 +#define VF610_CLK_ESAI_DIV 95 +#define VF610_CLK_ESAI 96 +#define VF610_CLK_SAI0_SEL 97 +#define VF610_CLK_SAI0_EN 98 +#define VF610_CLK_SAI0_DIV 99 +#define VF610_CLK_SAI0 100 +#define VF610_CLK_SAI1_SEL 101 +#define VF610_CLK_SAI1_EN 102 +#define VF610_CLK_SAI1_DIV 103 +#define VF610_CLK_SAI1 104 +#define VF610_CLK_SAI2_SEL 105 +#define VF610_CLK_SAI2_EN 106 +#define VF610_CLK_SAI2_DIV 107 +#define VF610_CLK_SAI2 108 +#define VF610_CLK_SAI3_SEL 109 +#define VF610_CLK_SAI3_EN 110 +#define VF610_CLK_SAI3_DIV 111 +#define VF610_CLK_SAI3 112 +#define VF610_CLK_USBC0 113 +#define VF610_CLK_USBC1 114 +#define VF610_CLK_QSPI0_SEL 115 +#define VF610_CLK_QSPI0_EN 116 +#define VF610_CLK_QSPI0_X4_DIV 117 +#define VF610_CLK_QSPI0_X2_DIV 118 +#define VF610_CLK_QSPI0_X1_DIV 119 +#define VF610_CLK_QSPI1_SEL 120 +#define VF610_CLK_QSPI1_EN 121 +#define VF610_CLK_QSPI1_X4_DIV 122 +#define VF610_CLK_QSPI1_X2_DIV 123 +#define VF610_CLK_QSPI1_X1_DIV 124 +#define VF610_CLK_QSPI0 125 +#define VF610_CLK_QSPI1 126 +#define VF610_CLK_NFC_SEL 127 +#define VF610_CLK_NFC_EN 128 +#define VF610_CLK_NFC_PRE_DIV 129 +#define VF610_CLK_NFC_FRAC_DIV 130 +#define VF610_CLK_NFC_INV 131 +#define VF610_CLK_NFC 132 +#define VF610_CLK_VADC_SEL 133 +#define VF610_CLK_VADC_EN 134 +#define VF610_CLK_VADC_DIV 135 +#define VF610_CLK_VADC_DIV_HALF 136 +#define VF610_CLK_VADC 137 +#define VF610_CLK_ADC0 138 +#define VF610_CLK_ADC1 139 +#define VF610_CLK_DAC0 140 +#define VF610_CLK_DAC1 141 +#define VF610_CLK_FLEXCAN0 142 +#define VF610_CLK_FLEXCAN1 143 +#define VF610_CLK_ASRC 144 +#define VF610_CLK_GPU_SEL 145 +#define VF610_CLK_GPU_EN 146 +#define VF610_CLK_GPU2D 147 +#define VF610_CLK_END 148 + +#endif /* __DT_BINDINGS_CLOCK_VF610_H */ diff --git a/include/linux/arm-cci.h b/include/linux/arm-cci.h new file mode 100644 index 00000000000..79d6edf446d --- /dev/null +++ b/include/linux/arm-cci.h @@ -0,0 +1,61 @@ +/* + * CCI cache coherent interconnect support + * + * Copyright (C) 2013 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_ARM_CCI_H +#define __LINUX_ARM_CCI_H + +#include <linux/errno.h> +#include <linux/types.h> + +struct device_node; + +#ifdef CONFIG_ARM_CCI +extern bool cci_probed(void); +extern int cci_ace_get_port(struct device_node *dn); +extern int cci_disable_port_by_cpu(u64 mpidr); +extern int __cci_control_port_by_device(struct device_node *dn, bool enable); +extern int __cci_control_port_by_index(u32 port, bool enable); +#else +static inline bool cci_probed(void) { return false; } +static inline int cci_ace_get_port(struct device_node *dn) +{ + return -ENODEV; +} +static inline int cci_disable_port_by_cpu(u64 mpidr) { return -ENODEV; } +static inline int __cci_control_port_by_device(struct device_node *dn, + bool enable) +{ + return -ENODEV; +} +static inline int __cci_control_port_by_index(u32 port, bool enable) +{ + return -ENODEV; +} +#endif +#define cci_disable_port_by_device(dev) \ + __cci_control_port_by_device(dev, false) +#define cci_enable_port_by_device(dev) \ + __cci_control_port_by_device(dev, true) +#define cci_disable_port_by_index(dev) \ + __cci_control_port_by_index(dev, false) +#define cci_enable_port_by_index(dev) \ + __cci_control_port_by_index(dev, true) + +#endif diff --git a/include/linux/clk/mvebu.h b/include/linux/clk/mvebu.h deleted file mode 100644 index 8c4ae713b06..00000000000 --- a/include/linux/clk/mvebu.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __CLK_MVEBU_H_ -#define __CLK_MVEBU_H_ - -void __init mvebu_clocks_init(void); - -#endif diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h index 56be7cd9aa8..e062d317ccc 100644 --- a/include/linux/clk/zynq.h +++ b/include/linux/clk/zynq.h @@ -1,4 +1,5 @@ /* + * Copyright (C) 2013 Xilinx Inc. * Copyright (C) 2012 National Instruments * * This program is free software; you can redistribute it and/or modify @@ -19,6 +20,11 @@ #ifndef __LINUX_CLK_ZYNQ_H_ #define __LINUX_CLK_ZYNQ_H_ -void __init xilinx_zynq_clocks_init(void __iomem *slcr); +#include <linux/spinlock.h> +void zynq_clock_init(void __iomem *slcr); + +struct clk *clk_register_zynq_pll(const char *name, const char *parent, + void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index, + spinlock_t *lock); #endif diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h index dd755ce2a5e..07261d52a6d 100644 --- a/include/linux/dw_apb_timer.h +++ b/include/linux/dw_apb_timer.h @@ -53,5 +53,4 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs); cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs); void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs); -extern void dw_apb_timer_init(void); #endif /* __DW_APB_TIMER_H__ */ diff --git a/include/linux/mfd/davinci_voicecodec.h b/include/linux/mfd/davinci_voicecodec.h index 0ab61320ffa..7dd6524d2aa 100644 --- a/include/linux/mfd/davinci_voicecodec.h +++ b/include/linux/mfd/davinci_voicecodec.h @@ -26,8 +26,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/mfd/core.h> - -#include <mach/edma.h> +#include <linux/platform_data/edma.h> /* * Register values. diff --git a/include/linux/mfd/syscon/clps711x.h b/include/linux/mfd/syscon/clps711x.h new file mode 100644 index 00000000000..26355abae51 --- /dev/null +++ b/include/linux/mfd/syscon/clps711x.h @@ -0,0 +1,94 @@ +/* + * CLPS711X system register bits definitions + * + * Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _LINUX_MFD_SYSCON_CLPS711X_H_ +#define _LINUX_MFD_SYSCON_CLPS711X_H_ + +#define SYSCON_OFFSET (0x00) +#define SYSFLG_OFFSET (0x40) + +#define SYSCON1_KBDSCAN(x) ((x) & 15) +#define SYSCON1_KBDSCAN_MASK (15) +#define SYSCON1_TC1M (1 << 4) +#define SYSCON1_TC1S (1 << 5) +#define SYSCON1_TC2M (1 << 6) +#define SYSCON1_TC2S (1 << 7) +#define SYSCON1_BZTOG (1 << 9) +#define SYSCON1_BZMOD (1 << 10) +#define SYSCON1_DBGEN (1 << 11) +#define SYSCON1_LCDEN (1 << 12) +#define SYSCON1_CDENTX (1 << 13) +#define SYSCON1_CDENRX (1 << 14) +#define SYSCON1_SIREN (1 << 15) +#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) +#define SYSCON1_ADCKSEL_MASK (3 << 16) +#define SYSCON1_EXCKEN (1 << 18) +#define SYSCON1_WAKEDIS (1 << 19) +#define SYSCON1_IRTXM (1 << 20) + +#define SYSCON2_SERSEL (1 << 0) +#define SYSCON2_KBD6 (1 << 1) +#define SYSCON2_DRAMZ (1 << 2) +#define SYSCON2_KBWEN (1 << 3) +#define SYSCON2_SS2TXEN (1 << 4) +#define SYSCON2_PCCARD1 (1 << 5) +#define SYSCON2_PCCARD2 (1 << 6) +#define SYSCON2_SS2RXEN (1 << 7) +#define SYSCON2_SS2MAEN (1 << 9) +#define SYSCON2_OSTB (1 << 12) +#define SYSCON2_CLKENSL (1 << 13) +#define SYSCON2_BUZFREQ (1 << 14) + +#define SYSCON3_ADCCON (1 << 0) +#define SYSCON3_CLKCTL0 (1 << 1) +#define SYSCON3_CLKCTL1 (1 << 2) +#define SYSCON3_DAISEL (1 << 3) +#define SYSCON3_ADCCKNSEN (1 << 4) +#define SYSCON3_VERSN(x) (((x) >> 5) & 7) +#define SYSCON3_VERSN_MASK (7 << 5) +#define SYSCON3_FASTWAKE (1 << 8) +#define SYSCON3_DAIEN (1 << 9) +#define SYSCON3_128FS SYSCON3_DAIEN +#define SYSCON3_ENPD67 (1 << 10) + +#define SYSCON_UARTEN (1 << 8) + +#define SYSFLG1_MCDR (1 << 0) +#define SYSFLG1_DCDET (1 << 1) +#define SYSFLG1_WUDR (1 << 2) +#define SYSFLG1_WUON (1 << 3) +#define SYSFLG1_CTS (1 << 8) +#define SYSFLG1_DSR (1 << 9) +#define SYSFLG1_DCD (1 << 10) +#define SYSFLG1_NBFLG (1 << 12) +#define SYSFLG1_RSTFLG (1 << 13) +#define SYSFLG1_PFFLG (1 << 14) +#define SYSFLG1_CLDFLG (1 << 15) +#define SYSFLG1_CRXFE (1 << 24) +#define SYSFLG1_CTXFF (1 << 25) +#define SYSFLG1_SSIBUSY (1 << 26) +#define SYSFLG1_ID (1 << 29) +#define SYSFLG1_VERID(x) (((x) >> 30) & 3) +#define SYSFLG1_VERID_MASK (3 << 30) + +#define SYSFLG2_SSRXOF (1 << 0) +#define SYSFLG2_RESVAL (1 << 1) +#define SYSFLG2_RESFRM (1 << 2) +#define SYSFLG2_SS2RXFE (1 << 3) +#define SYSFLG2_SS2TXFF (1 << 4) +#define SYSFLG2_SS2TXUF (1 << 5) +#define SYSFLG2_CKMODE (1 << 6) + +#define SYSFLG_UBUSY (1 << 11) +#define SYSFLG_URXFE (1 << 22) +#define SYSFLG_UTXFF (1 << 23) + +#endif diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/include/linux/platform_data/edma.h index 7e84c906cef..57300fd7cc0 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/include/linux/platform_data/edma.h @@ -1,28 +1,12 @@ /* - * TI DAVINCI dma definitions + * TI EDMA definitions * - * Copyright (C) 2006-2009 Texas Instruments. + * Copyright (C) 2006-2013 Texas Instruments. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * */ /* @@ -69,11 +53,6 @@ struct edmacc_param { unsigned int ccnt; }; -#define CCINT0_INTERRUPT 16 -#define CCERRINT_INTERRUPT 17 -#define TCERRINT0_INTERRUPT 18 -#define TCERRINT1_INTERRUPT 19 - /* fields in edmacc_param.opt */ #define SAM BIT(0) #define DAM BIT(1) @@ -87,70 +66,6 @@ struct edmacc_param { #define TCCHEN BIT(22) #define ITCCHEN BIT(23) -#define TRWORD (0x7<<2) -#define PAENTRY (0x1ff<<5) - -/* Drivers should avoid using these symbolic names for dm644x - * channels, and use platform_device IORESOURCE_DMA resources - * instead. (Other DaVinci chips have different peripherals - * and thus have different DMA channel mappings.) - */ -#define DAVINCI_DMA_MCBSP_TX 2 -#define DAVINCI_DMA_MCBSP_RX 3 -#define DAVINCI_DMA_VPSS_HIST 4 -#define DAVINCI_DMA_VPSS_H3A 5 -#define DAVINCI_DMA_VPSS_PRVU 6 -#define DAVINCI_DMA_VPSS_RSZ 7 -#define DAVINCI_DMA_IMCOP_IMXINT 8 -#define DAVINCI_DMA_IMCOP_VLCDINT 9 -#define DAVINCI_DMA_IMCO_PASQINT 10 -#define DAVINCI_DMA_IMCOP_DSQINT 11 -#define DAVINCI_DMA_SPI_SPIX 16 -#define DAVINCI_DMA_SPI_SPIR 17 -#define DAVINCI_DMA_UART0_URXEVT0 18 -#define DAVINCI_DMA_UART0_UTXEVT0 19 -#define DAVINCI_DMA_UART1_URXEVT1 20 -#define DAVINCI_DMA_UART1_UTXEVT1 21 -#define DAVINCI_DMA_UART2_URXEVT2 22 -#define DAVINCI_DMA_UART2_UTXEVT2 23 -#define DAVINCI_DMA_MEMSTK_MSEVT 24 -#define DAVINCI_DMA_MMCRXEVT 26 -#define DAVINCI_DMA_MMCTXEVT 27 -#define DAVINCI_DMA_I2C_ICREVT 28 -#define DAVINCI_DMA_I2C_ICXEVT 29 -#define DAVINCI_DMA_GPIO_GPINT0 32 -#define DAVINCI_DMA_GPIO_GPINT1 33 -#define DAVINCI_DMA_GPIO_GPINT2 34 -#define DAVINCI_DMA_GPIO_GPINT3 35 -#define DAVINCI_DMA_GPIO_GPINT4 36 -#define DAVINCI_DMA_GPIO_GPINT5 37 -#define DAVINCI_DMA_GPIO_GPINT6 38 -#define DAVINCI_DMA_GPIO_GPINT7 39 -#define DAVINCI_DMA_GPIO_GPBNKINT0 40 -#define DAVINCI_DMA_GPIO_GPBNKINT1 41 -#define DAVINCI_DMA_GPIO_GPBNKINT2 42 -#define DAVINCI_DMA_GPIO_GPBNKINT3 43 -#define DAVINCI_DMA_GPIO_GPBNKINT4 44 -#define DAVINCI_DMA_TIMER0_TINT0 48 -#define DAVINCI_DMA_TIMER1_TINT1 49 -#define DAVINCI_DMA_TIMER2_TINT2 50 -#define DAVINCI_DMA_TIMER3_TINT3 51 -#define DAVINCI_DMA_PWM0 52 -#define DAVINCI_DMA_PWM1 53 -#define DAVINCI_DMA_PWM2 54 - -/* DA830 specific EDMA3 information */ -#define EDMA_DA830_NUM_DMACH 32 -#define EDMA_DA830_NUM_TCC 32 -#define EDMA_DA830_NUM_PARAMENTRY 128 -#define EDMA_DA830_NUM_EVQUE 2 -#define EDMA_DA830_NUM_TC 2 -#define EDMA_DA830_CHMAP_EXIST 0 -#define EDMA_DA830_NUM_REGIONS 4 -#define DA830_DMACH2EVENT_MAP0 0x000FC03Fu -#define DA830_DMACH2EVENT_MAP1 0x00000000u -#define DA830_EDMA_ARM_OWN 0x30FFCCFFu - /*ch_status paramater of callback function possible values*/ #define DMA_COMPLETE 1 #define DMA_CC_ERROR 2 @@ -260,8 +175,9 @@ struct edma_soc_info { /* Resource reservation for other cores */ struct edma_rsv_info *rsv; - const s8 (*queue_tc_mapping)[2]; - const s8 (*queue_priority_mapping)[2]; + s8 (*queue_tc_mapping)[2]; + s8 (*queue_priority_mapping)[2]; + const s16 (*xbar_chans)[2]; }; #endif diff --git a/include/linux/platform_data/gpio-rcar.h b/include/linux/platform_data/gpio-rcar.h index b253f77a7dd..2d8d6943281 100644 --- a/include/linux/platform_data/gpio-rcar.h +++ b/include/linux/platform_data/gpio-rcar.h @@ -17,10 +17,13 @@ #define __GPIO_RCAR_H__ struct gpio_rcar_config { - unsigned int gpio_base; + int gpio_base; unsigned int irq_base; unsigned int number_of_pins; const char *pctl_name; + unsigned has_both_edge_trigger:1; }; +#define RCAR_GP_PIN(bank, pin) (((bank) * 32) + (pin)) + #endif /* __GPIO_RCAR_H__ */ diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h deleted file mode 100644 index dfbc65d1048..00000000000 --- a/include/linux/platform_data/pinctrl-coh901.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2007-2012 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * GPIO block resgister definitions and inline macros for - * U300 GPIO COH 901 335 or COH 901 571/3 - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_GPIO_U300_H -#define __MACH_U300_GPIO_U300_H - -/** - * struct u300_gpio_platform - U300 GPIO platform data - * @ports: number of GPIO block ports - * @gpio_base: first GPIO number for this block (use a free range) - */ -struct u300_gpio_platform { - u8 ports; - int gpio_base; -}; - -#endif /* __MACH_U300_GPIO_U300_H */ diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h index 7af305b3786..8dc2fa47a2a 100644 --- a/include/linux/platform_data/spi-davinci.h +++ b/include/linux/platform_data/spi-davinci.h @@ -19,7 +19,7 @@ #ifndef __ARCH_ARM_DAVINCI_SPI_H #define __ARCH_ARM_DAVINCI_SPI_H -#include <mach/edma.h> +#include <linux/platform_data/edma.h> #define SPI_INTERN_CS 0xFF diff --git a/include/linux/platform_data/usb-rcar-phy.h b/include/linux/platform_data/usb-rcar-phy.h new file mode 100644 index 00000000000..8ec6964a32a --- /dev/null +++ b/include/linux/platform_data/usb-rcar-phy.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __USB_RCAR_PHY_H +#define __USB_RCAR_PHY_H + +#include <linux/types.h> + +struct rcar_phy_platform_data { + bool ferrite_bead:1; /* (R8A7778 only) */ + + bool port1_func:1; /* true: port 1 used by function, false: host */ + unsigned penc1:1; /* Output of the PENC1 pin in function mode */ + struct { /* Overcurrent pin control for ports 0..2 */ + bool select_3_3v:1; /* true: USB_OVCn pin, false: OVCn pin */ + /* Set to false on port 1 in function mode */ + bool active_high:1; /* true: active high, false: active low */ + /* Set to true on port 1 in function mode */ + } ovc_pin[3]; /* (R8A7778 only has 2 ports) */ +}; + +#endif /* __USB_RCAR_PHY_H */ diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h index 99238b096f7..7eb4dcd0d38 100644 --- a/include/linux/usb/ehci_pdriver.h +++ b/include/linux/usb/ehci_pdriver.h @@ -19,6 +19,9 @@ #ifndef __USB_CORE_EHCI_PDRIVER_H #define __USB_CORE_EHCI_PDRIVER_H +struct platform_device; +struct usb_hcd; + /** * struct usb_ehci_pdata - platform_data for generic ehci driver * @@ -50,6 +53,7 @@ struct usb_ehci_pdata { /* Turn on only VBUS suspend power and hotplug detection, * turn off everything else */ void (*power_suspend)(struct platform_device *pdev); + int (*pre_setup)(struct usb_hcd *hcd); }; #endif /* __USB_CORE_EHCI_PDRIVER_H */ diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 484b22c5df5..fd7c45b9ed5 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -14,6 +14,7 @@ #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/platform_data/edma.h> #include <linux/i2c.h> #include <sound/core.h> #include <sound/pcm.h> diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c index b2f27c2e5fd..8460edce1c3 100644 --- a/sound/soc/davinci/davinci-pcm.c +++ b/sound/soc/davinci/davinci-pcm.c @@ -17,6 +17,7 @@ #include <linux/dma-mapping.h> #include <linux/kernel.h> #include <linux/genalloc.h> +#include <linux/platform_data/edma.h> #include <sound/core.h> #include <sound/pcm.h> diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h index b6ef7039dd0..fbb710c76c0 100644 --- a/sound/soc/davinci/davinci-pcm.h +++ b/sound/soc/davinci/davinci-pcm.h @@ -14,7 +14,7 @@ #include <linux/genalloc.h> #include <linux/platform_data/davinci_asp.h> -#include <mach/edma.h> +#include <linux/platform_data/edma.h> struct davinci_pcm_dma_params { int channel; /* sync dma channel ID */ |