summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/hwmon/k10temp60
-rw-r--r--drivers/hwmon/Kconfig20
-rw-r--r--drivers/hwmon/Makefile2
-rw-r--r--drivers/hwmon/k10temp.c197
-rw-r--r--drivers/hwmon/sht15.c6
-rw-r--r--drivers/hwmon/smsc47m1.c153
-rw-r--r--drivers/hwmon/via-cputemp.c356
-rw-r--r--drivers/hwmon/w83627hf.c2
8 files changed, 766 insertions, 30 deletions
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
new file mode 100644
index 00000000000..a7a18d453a5
--- /dev/null
+++ b/Documentation/hwmon/k10temp
@@ -0,0 +1,60 @@
+Kernel driver k10temp
+=====================
+
+Supported chips:
+* AMD Family 10h processors:
+ Socket F: Quad-Core/Six-Core/Embedded Opteron
+ Socket AM2+: Opteron, Phenom (II) X3/X4
+ Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
+ Socket S1G3: Athlon II, Sempron, Turion II
+* AMD Family 11h processors:
+ Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+
+ Prefix: 'k10temp'
+ Addresses scanned: PCI space
+ Datasheets:
+ BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors:
+ http://support.amd.com/us/Processor_TechDocs/31116.pdf
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
+ http://support.amd.com/us/Processor_TechDocs/41256.pdf
+ Revision Guide for AMD Family 10h Processors:
+ http://support.amd.com/us/Processor_TechDocs/41322.pdf
+ Revision Guide for AMD Family 11h Processors:
+ http://support.amd.com/us/Processor_TechDocs/41788.pdf
+ AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
+ http://support.amd.com/us/Processor_TechDocs/43373.pdf
+ AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
+ http://support.amd.com/us/Processor_TechDocs/43374.pdf
+ AMD Family 10h Desktop Processor Power and Thermal Data Sheet:
+ http://support.amd.com/us/Processor_TechDocs/43375.pdf
+
+Author: Clemens Ladisch <clemens@ladisch.de>
+
+Description
+-----------
+
+This driver permits reading of the internal temperature sensor of AMD
+Family 10h and 11h processors.
+
+All these processors have a sensor, but on older revisions of Family 10h
+processors, the sensor may return inconsistent values (erratum 319). The
+driver will refuse to load on these revisions unless you specify the
+"force=1" module parameter.
+
+There is one temperature measurement value, available as temp1_input in
+sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.
+Please note that it is defined as a relative value; to quote the AMD manual:
+
+ Tctl is the processor temperature control value, used by the platform to
+ control cooling systems. Tctl is a non-physical temperature on an
+ arbitrary scale measured in degrees. It does _not_ represent an actual
+ physical temperature like die or case temperature. Instead, it specifies
+ the processor temperature relative to the point at which the system must
+ supply the maximum cooling for the processor's specified maximum case
+ temperature and maximum thermal power dissipation.
+
+The maximum value for Tctl is available in the file temp1_max.
+
+If the BIOS has enabled hardware temperature control, the threshold at
+which the processor will throttle itself to avoid damage is available in
+temp1_crit and temp1_crit_hyst.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index bf28945c610..46c3c566307 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -228,6 +228,18 @@ config SENSORS_K8TEMP
This driver can also be built as a module. If so, the module
will be called k8temp.
+config SENSORS_K10TEMP
+ tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+ depends on X86 && PCI
+ help
+ If you say yes here you get support for the temperature
+ sensor(s) inside your CPU. Supported are later revisions of
+ the AMD Family 10h and all revisions of the AMD Family 11h
+ microarchitectures.
+
+ This driver can also be built as a module. If so, the module
+ will be called k10temp.
+
config SENSORS_AMS
tristate "Apple Motion Sensor driver"
depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
@@ -810,6 +822,14 @@ config SENSORS_TMP421
This driver can also be built as a module. If so, the module
will be called tmp421.
+config SENSORS_VIA_CPUTEMP
+ tristate "VIA CPU temperature sensor"
+ depends on X86
+ help
+ If you say yes here you get support for the temperature
+ sensor inside your CPU. Supported are all known variants of
+ the VIA C7 and Nano.
+
config SENSORS_VIA686A
tristate "VIA686A"
depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 4131e253f96..450c8e89427 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
+obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o
obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o
obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d.o lis3lv02d_i2c.o
@@ -88,6 +89,7 @@ obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
+obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
obj-$(CONFIG_SENSORS_VT1211) += vt1211.o
obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
new file mode 100644
index 00000000000..d8a26d16d94
--- /dev/null
+++ b/drivers/hwmon/k10temp.c
@@ -0,0 +1,197 @@
+/*
+ * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ *
+ * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ * This driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+
+MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
+MODULE_LICENSE("GPL");
+
+static bool force;
+module_param(force, bool, 0444);
+MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
+
+#define REG_HARDWARE_THERMAL_CONTROL 0x64
+#define HTC_ENABLE 0x00000001
+
+#define REG_REPORTED_TEMPERATURE 0xa4
+
+#define REG_NORTHBRIDGE_CAPABILITIES 0xe8
+#define NB_CAP_HTC 0x00000400
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 regval;
+
+ pci_read_config_dword(to_pci_dev(dev),
+ REG_REPORTED_TEMPERATURE, &regval);
+ return sprintf(buf, "%u\n", (regval >> 21) * 125);
+}
+
+static ssize_t show_temp_max(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", 70 * 1000);
+}
+
+static ssize_t show_temp_crit(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int show_hyst = attr->index;
+ u32 regval;
+ int value;
+
+ pci_read_config_dword(to_pci_dev(dev),
+ REG_HARDWARE_THERMAL_CONTROL, &regval);
+ value = ((regval >> 16) & 0x7f) * 500 + 52000;
+ if (show_hyst)
+ value -= ((regval >> 24) & 0xf) * 500;
+ return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "k10temp\n");
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static bool __devinit has_erratum_319(void)
+{
+ /*
+ * Erratum 319: The thermal sensor of older Family 10h processors
+ * (B steppings) may be unreliable.
+ */
+ return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2;
+}
+
+static int __devinit k10temp_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct device *hwmon_dev;
+ u32 reg_caps, reg_htc;
+ int err;
+
+ if (has_erratum_319() && !force) {
+ dev_err(&pdev->dev,
+ "unreliable CPU thermal sensor; monitoring disabled\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ err = device_create_file(&pdev->dev, &dev_attr_temp1_input);
+ if (err)
+ goto exit;
+ err = device_create_file(&pdev->dev, &dev_attr_temp1_max);
+ if (err)
+ goto exit_remove;
+
+ pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES, &reg_caps);
+ pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, &reg_htc);
+ if ((reg_caps & NB_CAP_HTC) && (reg_htc & HTC_ENABLE)) {
+ err = device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit.dev_attr);
+ if (err)
+ goto exit_remove;
+ err = device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
+ err = device_create_file(&pdev->dev, &dev_attr_name);
+ if (err)
+ goto exit_remove;
+
+ hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon_dev)) {
+ err = PTR_ERR(hwmon_dev);
+ goto exit_remove;
+ }
+ dev_set_drvdata(&pdev->dev, hwmon_dev);
+
+ if (has_erratum_319() && force)
+ dev_warn(&pdev->dev,
+ "unreliable CPU thermal sensor; check erratum 319\n");
+ return 0;
+
+exit_remove:
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ device_remove_file(&pdev->dev, &dev_attr_temp1_input);
+ device_remove_file(&pdev->dev, &dev_attr_temp1_max);
+ device_remove_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit.dev_attr);
+ device_remove_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr);
+exit:
+ return err;
+}
+
+static void __devexit k10temp_remove(struct pci_dev *pdev)
+{
+ hwmon_device_unregister(dev_get_drvdata(&pdev->dev));
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ device_remove_file(&pdev->dev, &dev_attr_temp1_input);
+ device_remove_file(&pdev->dev, &dev_attr_temp1_max);
+ device_remove_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit.dev_attr);
+ device_remove_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr);
+ dev_set_drvdata(&pdev->dev, NULL);
+}
+
+static struct pci_device_id k10temp_id_table[] = {
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+ {}
+};
+MODULE_DEVICE_TABLE(pci, k10temp_id_table);
+
+static struct pci_driver k10temp_driver = {
+ .name = "k10temp",
+ .id_table = k10temp_id_table,
+ .probe = k10temp_probe,
+ .remove = __devexit_p(k10temp_remove),
+};
+
+static int __init k10temp_init(void)
+{
+ return pci_register_driver(&k10temp_driver);
+}
+
+static void __exit k10temp_exit(void)
+{
+ pci_unregister_driver(&k10temp_driver);
+}
+
+module_init(k10temp_init)
+module_exit(k10temp_exit)
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index ebe38b680ee..864a371f6eb 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -305,7 +305,7 @@ static inline int sht15_calc_temp(struct sht15_data *data)
int d1 = 0;
int i;
- for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++)
+ for (i = 1; i < ARRAY_SIZE(temppoints); i++)
/* Find pointer to interpolate */
if (data->supply_uV > temppoints[i - 1].vdd) {
d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
@@ -332,12 +332,12 @@ static inline int sht15_calc_humid(struct sht15_data *data)
const int c1 = -4;
const int c2 = 40500; /* x 10 ^ -6 */
- const int c3 = 2800; /* x10 ^ -9 */
+ const int c3 = -2800; /* x10 ^ -9 */
RHlinear = c1*1000
+ c2 * data->val_humid/1000
+ (data->val_humid * data->val_humid * c3)/1000000;
- return (temp - 25000) * (10000 + 800 * data->val_humid)
+ return (temp - 25000) * (10000 + 80 * data->val_humid)
/ 1000000 + RHlinear;
}
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 8ad50fdba00..9ca97818bd4 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -136,11 +136,11 @@ struct smsc47m1_data {
struct smsc47m1_sio_data {
enum chips type;
+ u8 activate; /* Remember initial device state */
};
-static int smsc47m1_probe(struct platform_device *pdev);
-static int __devexit smsc47m1_remove(struct platform_device *pdev);
+static int __exit smsc47m1_remove(struct platform_device *pdev);
static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
int init);
@@ -160,8 +160,7 @@ static struct platform_driver smsc47m1_driver = {
.owner = THIS_MODULE,
.name = DRVNAME,
},
- .probe = smsc47m1_probe,
- .remove = __devexit_p(smsc47m1_remove),
+ .remove = __exit_p(smsc47m1_remove),
};
static ssize_t get_fan(struct device *dev, struct device_attribute
@@ -470,24 +469,126 @@ static int __init smsc47m1_find(unsigned short *addr,
superio_select();
*addr = (superio_inb(SUPERIO_REG_BASE) << 8)
| superio_inb(SUPERIO_REG_BASE + 1);
- val = superio_inb(SUPERIO_REG_ACT);
- if (*addr == 0 || (val & 0x01) == 0) {
- pr_info(DRVNAME ": Device is disabled, will not use\n");
+ if (*addr == 0) {
+ pr_info(DRVNAME ": Device address not set, will not use\n");
superio_exit();
return -ENODEV;
}
+ /* Enable only if address is set (needed at least on the
+ * Compaq Presario S4000NX) */
+ sio_data->activate = superio_inb(SUPERIO_REG_ACT);
+ if ((sio_data->activate & 0x01) == 0) {
+ pr_info(DRVNAME ": Enabling device\n");
+ superio_outb(SUPERIO_REG_ACT, sio_data->activate | 0x01);
+ }
+
superio_exit();
return 0;
}
-static int __devinit smsc47m1_probe(struct platform_device *pdev)
+/* Restore device to its initial state */
+static void __init smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
+{
+ if ((sio_data->activate & 0x01) == 0) {
+ superio_enter();
+ superio_select();
+
+ pr_info(DRVNAME ": Disabling device\n");
+ superio_outb(SUPERIO_REG_ACT, sio_data->activate);
+
+ superio_exit();
+ }
+}
+
+#define CHECK 1
+#define REQUEST 2
+#define RELEASE 3
+
+/*
+ * This function can be used to:
+ * - test for resource conflicts with ACPI
+ * - request the resources
+ * - release the resources
+ * We only allocate the I/O ports we really need, to minimize the risk of
+ * conflicts with ACPI or with other drivers.
+ */
+static int smsc47m1_handle_resources(unsigned short address, enum chips type,
+ int action, struct device *dev)
+{
+ static const u8 ports_m1[] = {
+ /* register, region length */
+ 0x04, 1,
+ 0x33, 4,
+ 0x56, 7,
+ };
+
+ static const u8 ports_m2[] = {
+ /* register, region length */
+ 0x04, 1,
+ 0x09, 1,
+ 0x2c, 2,
+ 0x35, 4,
+ 0x56, 7,
+ 0x69, 4,
+ };
+
+ int i, ports_size, err;
+ const u8 *ports;
+
+ switch (type) {
+ case smsc47m1:
+ default:
+ ports = ports_m1;
+ ports_size = ARRAY_SIZE(ports_m1);
+ break;
+ case smsc47m2:
+ ports = ports_m2;
+ ports_size = ARRAY_SIZE(ports_m2);
+ break;
+ }
+
+ for (i = 0; i + 1 < ports_size; i += 2) {
+ unsigned short start = address + ports[i];
+ unsigned short len = ports[i + 1];
+
+ switch (action) {
+ case CHECK:
+ /* Only check for conflicts */
+ err = acpi_check_region(start, len, DRVNAME);
+ if (err)
+ return err;
+ break;
+ case REQUEST:
+ /* Request the resources */
+ if (!request_region(start, len, DRVNAME)) {
+ dev_err(dev, "Region 0x%hx-0x%hx already in "
+ "use!\n", start, start + len);
+
+ /* Undo all requests */
+ for (i -= 2; i >= 0; i -= 2)
+ release_region(address + ports[i],
+ ports[i + 1]);
+ return -EBUSY;
+ }
+ break;
+ case RELEASE:
+ /* Release the resources */
+ release_region(start, len);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int __init smsc47m1_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct smsc47m1_sio_data *sio_data = dev->platform_data;
struct smsc47m1_data *data;
struct resource *res;
- int err = 0;
+ int err;
int fan1, fan2, fan3, pwm1, pwm2, pwm3;
static const char *names[] = {
@@ -496,12 +597,10 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev)
};
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!request_region(res->start, SMSC_EXTENT, DRVNAME)) {
- dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
- (unsigned long)res->start,
- (unsigned long)res->end);
- return -EBUSY;
- }
+ err = smsc47m1_handle_resources(res->start, sio_data->type,
+ REQUEST, dev);
+ if (err < 0)
+ return err;
if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
err = -ENOMEM;
@@ -637,11 +736,11 @@ error_free:
platform_set_drvdata(pdev, NULL);
kfree(data);
error_release:
- release_region(res->start, SMSC_EXTENT);
+ smsc47m1_handle_resources(res->start, sio_data->type, RELEASE, dev);
return err;
}
-static int __devexit smsc47m1_remove(struct platform_device *pdev)
+static int __exit smsc47m1_remove(struct platform_device *pdev)
{
struct smsc47m1_data *data = platform_get_drvdata(pdev);
struct resource *res;
@@ -650,7 +749,7 @@ static int __devexit smsc47m1_remove(struct platform_device *pdev)
sysfs_remove_group(&pdev->dev.kobj, &smsc47m1_group);
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- release_region(res->start, SMSC_EXTENT);
+ smsc47m1_handle_resources(res->start, data->type, RELEASE, &pdev->dev);
platform_set_drvdata(pdev, NULL);
kfree(data);
@@ -717,7 +816,7 @@ static int __init smsc47m1_device_add(unsigned short address,
};
int err;
- err = acpi_check_resource_conflict(&res);
+ err = smsc47m1_handle_resources(address, sio_data->type, CHECK, NULL);
if (err)
goto exit;
@@ -766,27 +865,29 @@ static int __init sm_smsc47m1_init(void)
if (smsc47m1_find(&address, &sio_data))
return -ENODEV;
- err = platform_driver_register(&smsc47m1_driver);
+ /* Sets global pdev as a side effect */
+ err = smsc47m1_device_add(address, &sio_data);
if (err)
goto exit;
- /* Sets global pdev as a side effect */
- err = smsc47m1_device_add(address, &sio_data);
+ err = platform_driver_probe(&smsc47m1_driver, smsc47m1_probe);
if (err)
- goto exit_driver;
+ goto exit_device;
return 0;
-exit_driver:
- platform_driver_unregister(&smsc47m1_driver);
+exit_device:
+ platform_device_unregister(pdev);
+ smsc47m1_restore(&sio_data);
exit:
return err;
}
static void __exit sm_smsc47m1_exit(void)
{
- platform_device_unregister(pdev);
platform_driver_unregister(&smsc47m1_driver);
+ smsc47m1_restore(pdev->dev.platform_data);
+ platform_device_unregister(pdev);
}
MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c
new file mode 100644
index 00000000000..7442cf75485
--- /dev/null
+++ b/drivers/hwmon/via-cputemp.c
@@ -0,0 +1,356 @@
+/*
+ * via-cputemp.c - Driver for VIA CPU core temperature monitoring
+ * Copyright (C) 2009 VIA Technologies, Inc.
+ *
+ * based on existing coretemp.c, which is
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/cpu.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+#define DRVNAME "via_cputemp"
+
+enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME } SHOW;
+
+/*
+ * Functions declaration
+ */
+
+struct via_cputemp_data {
+ struct device *hwmon_dev;
+ const char *name;
+ u32 id;
+ u32 msr;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ int ret;
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct via_cputemp_data *data = dev_get_drvdata(dev);
+
+ if (attr->index == SHOW_NAME)
+ ret = sprintf(buf, "%s\n", data->name);
+ else /* show label */
+ ret = sprintf(buf, "Core %d\n", data->id);
+ return ret;
+}
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct via_cputemp_data *data = dev_get_drvdata(dev);
+ u32 eax, edx;
+ int err;
+
+ err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx);
+ if (err)
+ return -EAGAIN;
+
+ return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL,
+ SHOW_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL);
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME);
+
+static struct attribute *via_cputemp_attributes[] = {
+ &sensor_dev_attr_name.dev_attr.attr,
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group via_cputemp_group = {
+ .attrs = via_cputemp_attributes,
+};
+
+static int __devinit via_cputemp_probe(struct platform_device *pdev)
+{
+ struct via_cputemp_data *data;
+ struct cpuinfo_x86 *c = &cpu_data(pdev->id);
+ int err;
+ u32 eax, edx;
+
+ data = kzalloc(sizeof(struct via_cputemp_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ dev_err(&pdev->dev, "Out of memory\n");
+ goto exit;
+ }
+
+ data->id = pdev->id;
+ data->name = "via_cputemp";
+
+ switch (c->x86_model) {
+ case 0xA:
+ /* C7 A */
+ case 0xD:
+ /* C7 D */
+ data->msr = 0x1169;
+ break;
+ case 0xF:
+ /* Nano */
+ data->msr = 0x1423;
+ break;
+ default:
+ err = -ENODEV;
+ goto exit_free;
+ }
+
+ /* test if we can access the TEMPERATURE MSR */
+ err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Unable to access TEMPERATURE MSR, giving up\n");
+ goto exit_free;
+ }
+
+ platform_set_drvdata(pdev, data);
+
+ err = sysfs_create_group(&pdev->dev.kobj, &via_cputemp_group);
+ if (err)
+ goto exit_free;
+
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ dev_err(&pdev->dev, "Class registration failed (%d)\n",
+ err);
+ goto exit_remove;
+ }
+
+ return 0;
+
+exit_remove:
+ sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group);
+exit_free:
+ platform_set_drvdata(pdev, NULL);
+ kfree(data);
+exit:
+ return err;
+}
+
+static int __devexit via_cputemp_remove(struct platform_device *pdev)
+{
+ struct via_cputemp_data *data = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group);
+ platform_set_drvdata(pdev, NULL);
+ kfree(data);
+ return 0;
+}
+
+static struct platform_driver via_cputemp_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = via_cputemp_probe,
+ .remove = __devexit_p(via_cputemp_remove),
+};
+
+struct pdev_entry {
+ struct list_head list;
+ struct platform_device *pdev;
+ unsigned int cpu;
+};
+
+static LIST_HEAD(pdev_list);
+static DEFINE_MUTEX(pdev_list_mutex);
+
+static int __cpuinit via_cputemp_device_add(unsigned int cpu)
+{
+ int err;
+ struct platform_device *pdev;
+ struct pdev_entry *pdev_entry;
+
+ pdev = platform_device_alloc(DRVNAME, cpu);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit;
+ }
+
+ pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL);
+ if (!pdev_entry) {
+ err = -ENOMEM;
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_free;
+ }
+
+ pdev_entry->pdev = pdev;
+ pdev_entry->cpu = cpu;
+ mutex_lock(&pdev_list_mutex);
+ list_add_tail(&pdev_entry->list, &pdev_list);
+ mutex_unlock(&pdev_list_mutex);
+
+ return 0;
+
+exit_device_free:
+ kfree(pdev_entry);
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void via_cputemp_device_remove(unsigned int cpu)
+{
+ struct pdev_entry *p, *n;
+ mutex_lock(&pdev_list_mutex);
+ list_for_each_entry_safe(p, n, &pdev_list, list) {
+ if (p->cpu == cpu) {
+ platform_device_unregister(p->pdev);
+ list_del(&p->list);
+ kfree(p);
+ }
+ }
+ mutex_unlock(&pdev_list_mutex);
+}
+
+static int __cpuinit via_cputemp_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long) hcpu;
+
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_DOWN_FAILED:
+ via_cputemp_device_add(cpu);
+ break;
+ case CPU_DOWN_PREPARE:
+ via_cputemp_device_remove(cpu);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block via_cputemp_cpu_notifier __refdata = {
+ .notifier_call = via_cputemp_cpu_callback,
+};
+#endif /* !CONFIG_HOTPLUG_CPU */
+
+static int __init via_cputemp_init(void)
+{
+ int i, err;
+ struct pdev_entry *p, *n;
+
+ if (cpu_data(0).x86_vendor != X86_VENDOR_CENTAUR) {
+ printk(KERN_DEBUG DRVNAME ": Not a VIA CPU\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ err = platform_driver_register(&via_cputemp_driver);
+ if (err)
+ goto exit;
+
+ for_each_online_cpu(i) {
+ struct cpuinfo_x86 *c = &cpu_data(i);
+
+ if (c->x86 != 6)
+ continue;
+
+ if (c->x86_model < 0x0a)
+ continue;
+
+ if (c->x86_model > 0x0f) {
+ printk(KERN_WARNING DRVNAME ": Unknown CPU "
+ "model 0x%x\n", c->x86_model);
+ continue;
+ }
+
+ err = via_cputemp_device_add(i);
+ if (err)
+ goto exit_devices_unreg;
+ }
+ if (list_empty(&pdev_list)) {
+ err = -ENODEV;
+ goto exit_driver_unreg;
+ }
+
+#ifdef CONFIG_HOTPLUG_CPU
+ register_hotcpu_notifier(&via_cputemp_cpu_notifier);
+#endif
+ return 0;
+
+exit_devices_unreg:
+ mutex_lock(&pdev_list_mutex);
+ list_for_each_entry_safe(p, n, &pdev_list, list) {
+ platform_device_unregister(p->pdev);
+ list_del(&p->list);
+ kfree(p);
+ }
+ mutex_unlock(&pdev_list_mutex);
+exit_driver_unreg:
+ platform_driver_unregister(&via_cputemp_driver);
+exit:
+ return err;
+}
+
+static void __exit via_cputemp_exit(void)
+{
+ struct pdev_entry *p, *n;
+#ifdef CONFIG_HOTPLUG_CPU
+ unregister_hotcpu_notifier(&via_cputemp_cpu_notifier);
+#endif
+ mutex_lock(&pdev_list_mutex);
+ list_for_each_entry_safe(p, n, &pdev_list, list) {
+ platform_device_unregister(p->pdev);
+ list_del(&p->list);
+ kfree(p);
+ }
+ mutex_unlock(&pdev_list_mutex);
+ platform_driver_unregister(&via_cputemp_driver);
+}
+
+MODULE_AUTHOR("Harald Welte <HaraldWelte@viatech.com>");
+MODULE_DESCRIPTION("VIA CPU temperature monitor");
+MODULE_LICENSE("GPL");
+
+module_init(via_cputemp_init)
+module_exit(via_cputemp_exit)
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index b257c722373..38e28052307 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -1135,6 +1135,7 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
"W83687THF",
};
+ sio_data->sioaddr = sioaddr;
superio_enter(sio_data);
val = force_id ? force_id : superio_inb(sio_data, DEVID);
switch (val) {
@@ -1177,7 +1178,6 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
}
err = 0;
- sio_data->sioaddr = sioaddr;
pr_info(DRVNAME ": Found %s chip at %#x\n",
names[sio_data->type], *addr);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 13:14:10 +0000