diff options
| -rw-r--r-- | drivers/mmc/core/mmc.c | 11 | ||||
| -rw-r--r-- | drivers/mmc/core/sd.c | 18 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 5 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 9 |
4 files changed, 32 insertions, 11 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index c528017d612..c2e120b11be 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -323,6 +323,17 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr) mmc_attach_bus(host, &mmc_ops); + /* + * Sanity check the voltages that the card claims to + * support. + */ + if (ocr & 0x7F) { + printk(KERN_WARNING "%s: card claims to support voltages " + "below the defined range. These will be ignored.\n", + mmc_hostname(host)); + ocr &= ~0x7F; + } + host->ocr = mmc_select_voltage(host, ocr); /* diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 6c6beb48f3a..fb18b301502 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -297,6 +297,24 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr) mmc_attach_bus(host, &mmc_sd_ops); + /* + * Sanity check the voltages that the card claims to + * support. + */ + if (ocr & 0x7F) { + printk(KERN_WARNING "%s: card claims to support voltages " + "below the defined range. These will be ignored.\n", + mmc_hostname(host)); + ocr &= ~0x7F; + } + + if (ocr & MMC_VDD_165_195) { + printk(KERN_WARNING "%s: SD card claims to support the " + "incompletely defined 'low voltage range'. This " + "will be ignored.\n", mmc_hostname(host)); + ocr &= ~MMC_VDD_165_195; + } + host->ocr = mmc_select_voltage(host, ocr); /* diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index a57f6a3d48d..ff5bf73cdd2 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -659,8 +659,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) pwr = SDHCI_POWER_ON; switch (1 << power) { - case MMC_VDD_17_18: - case MMC_VDD_18_19: + case MMC_VDD_165_195: pwr |= SDHCI_POWER_180; break; case MMC_VDD_29_30: @@ -1280,7 +1279,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) if (caps & SDHCI_CAN_VDD_300) mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31; if (caps & SDHCI_CAN_VDD_180) - mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19; + mmc->ocr_avail |= MMC_VDD_165_195; if (mmc->ocr_avail == 0) { printk(KERN_ERR "%s: Hardware doesn't report any " diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 5a66d8a2bf1..b1350dfd3e9 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -65,14 +65,7 @@ struct mmc_host { unsigned int f_max; u32 ocr_avail; -#define MMC_VDD_145_150 0x00000001 /* VDD voltage 1.45 - 1.50 */ -#define MMC_VDD_150_155 0x00000002 /* VDD voltage 1.50 - 1.55 */ -#define MMC_VDD_155_160 0x00000004 /* VDD voltage 1.55 - 1.60 */ -#define MMC_VDD_160_165 0x00000008 /* VDD voltage 1.60 - 1.65 */ -#define MMC_VDD_165_170 0x00000010 /* VDD voltage 1.65 - 1.70 */ -#define MMC_VDD_17_18 0x00000020 /* VDD voltage 1.7 - 1.8 */ -#define MMC_VDD_18_19 0x00000040 /* VDD voltage 1.8 - 1.9 */ -#define MMC_VDD_19_20 0x00000080 /* VDD voltage 1.9 - 2.0 */ +#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ #define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ #define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ |