diff options
| -rw-r--r-- | drivers/net/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/net/Makefile | 5 | ||||
| -rw-r--r-- | drivers/net/fsl_pq_mdio.c | 463 | ||||
| -rw-r--r-- | drivers/net/fsl_pq_mdio.h | 45 | ||||
| -rw-r--r-- | drivers/net/gianfar.c | 23 | ||||
| -rw-r--r-- | drivers/net/gianfar.h | 13 | ||||
| -rw-r--r-- | drivers/net/gianfar_mii.h | 54 | ||||
| -rw-r--r-- | drivers/net/ucc_geth.c | 16 | ||||
| -rw-r--r-- | drivers/net/ucc_geth.h | 14 | ||||
| -rw-r--r-- | drivers/net/ucc_geth_ethtool.c | 1 | ||||
| -rw-r--r-- | drivers/net/ucc_geth_mii.c | 295 | ||||
| -rw-r--r-- | drivers/net/ucc_geth_mii.h | 101 |
12 files changed, 549 insertions, 490 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 49f4d50abc5..62bc0223a8e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2272,9 +2272,17 @@ config GELIC_WIRELESS_OLD_PSK_INTERFACE If unsure, say N. +config FSL_PQ_MDIO + tristate "Freescale PQ MDIO" + depends on FSL_SOC + select PHYLIB + help + This driver supports the MDIO bus used by the gianfar and UCC drivers. + config GIANFAR tristate "Gianfar Ethernet" depends on FSL_SOC + select FSL_PQ_MDIO select PHYLIB select CRC32 help @@ -2284,6 +2292,7 @@ config GIANFAR config UCC_GETH tristate "Freescale QE Gigabit Ethernet" depends on QUICC_ENGINE + select FSL_PQ_MDIO select PHYLIB help This driver supports the Gigabit Ethernet mode of the QUICC Engine, diff --git a/drivers/net/Makefile b/drivers/net/Makefile index a3c5c002f22..ad87ba72cf1 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -24,11 +24,12 @@ obj-$(CONFIG_JME) += jme.o gianfar_driver-objs := gianfar.o \ gianfar_ethtool.o \ - gianfar_mii.o \ gianfar_sysfs.o obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o -ucc_geth_driver-objs := ucc_geth.o ucc_geth_mii.o ucc_geth_ethtool.o +ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o + +obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o # # link order important here diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c new file mode 100644 index 00000000000..c434a156d7a --- /dev/null +++ b/drivers/net/fsl_pq_mdio.c @@ -0,0 +1,463 @@ +/* + * Freescale PowerQUICC Ethernet Driver -- MIIM bus implementation + * Provides Bus interface for MIIM regs + * + * Author: Andy Fleming <afleming@freescale.com> + * + * Copyright (c) 2002-2004,2008 Freescale Semiconductor, Inc. + * + * Based on gianfar_mii.c and ucc_geth_mii.c (Li Yang, Kim Phillips) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> +#include <linux/of.h> +#include <linux/of_platform.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/ucc.h> + +#include "gianfar.h" +#include "fsl_pq_mdio.h" + +/* + * Write value to the PHY at mii_id at register regnum, + * on the bus attached to the local interface, which may be different from the + * generic mdio bus (tied to a single interface), waiting until the write is + * done before returning. This is helpful in programming interfaces like + * the TBI which control interfaces like onchip SERDES and are always tied to + * the local mdio pins, which may not be the same as system mdio bus, used for + * controlling the external PHYs, for example. + */ +int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id, + int regnum, u16 value) +{ + /* Set the PHY address and the register address we want to write */ + out_be32(®s->miimadd, (mii_id << 8) | regnum); + + /* Write out the value we want */ + out_be32(®s->miimcon, value); + + /* Wait for the transaction to finish */ + while (in_be32(®s->miimind) & MIIMIND_BUSY) + cpu_relax(); + + return 0; +} + +/* + * Read the bus for PHY at addr mii_id, register regnum, and + * return the value. Clears miimcom first. All PHY operation + * done on the bus attached to the local interface, + * which may be different from the generic mdio bus + * This is helpful in programming interfaces like + * the TBI which, in turn, control interfaces like onchip SERDES + * and are always tied to the local mdio pins, which may not be the + * same as system mdio bus, used for controlling the external PHYs, for eg. + */ +int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs, + int mii_id, int regnum) +{ + u16 value; + + /* Set the PHY address and the register address we want to read */ + out_be32(®s->miimadd, (mii_id << 8) | regnum); + + /* Clear miimcom, and then initiate a read */ + out_be32(®s->miimcom, 0); + out_be32(®s->miimcom, MII_READ_COMMAND); + + /* Wait for the transaction to finish */ + while (in_be32(®s->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) + cpu_relax(); + + /* Grab the value of the register from miimstat */ + value = in_be32(®s->miimstat); + + return value; +} + +/* + * Write value to the PHY at mii_id at register regnum, + * on the bus, waiting until the write is done before returning. + */ +int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) +{ + struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv; + + /* Write to the local MII regs */ + return(fsl_pq_local_mdio_write(regs, mii_id, regnum, value)); +} + +/* + * Read the bus for PHY at addr mii_id, register regnum, and + * return the value. Clears miimcom first. + */ +int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum) +{ + struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv; + + /* Read the local MII regs */ + return(fsl_pq_local_mdio_read(regs, mii_id, regnum)); +} + +/* Reset the MIIM registers, and wait for the bus to free */ +static int fsl_pq_mdio_reset(struct mii_bus *bus) +{ + struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv; + unsigned int timeout = PHY_INIT_TIMEOUT; + + mutex_lock(&bus->mdio_lock); + + /* Reset the management interface */ + out_be32(®s->miimcfg, MIIMCFG_RESET); + + /* Setup the MII Mgmt clock speed */ + out_be32(®s->miimcfg, MIIMCFG_INIT_VALUE); + + /* Wait until the bus is free */ + while ((in_be32(®s->miimind) & MIIMIND_BUSY) && timeout--) + cpu_relax(); + + mutex_unlock(&bus->mdio_lock); + + if(timeout == 0) { + printk(KERN_ERR "%s: The MII Bus is stuck!\n", + bus->name); + return -EBUSY; + } + + return 0; +} + +/* Allocate an array which provides irq #s for each PHY on the given bus */ +static int *create_irq_map(struct device_node *np) +{ + int *irqs; + int i; + struct device_node *child = NULL; + + irqs = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); + + if (!irqs) + return NULL; + + for (i = 0; i < PHY_MAX_ADDR; i++) + irqs[i] = PHY_POLL; + + while ((child = of_get_next_child(np, child)) != NULL) { + int irq = irq_of_parse_and_map(child, 0); + const u32 *id; + + if (irq == NO_IRQ) + continue; + + id = of_get_property(child, "reg", NULL); + + if (!id) + continue; + + if (*id < PHY_MAX_ADDR && *id >= 0) + irqs[*id] = irq; + else + printk(KERN_WARNING "%s: " + "%d is not a valid PHY address\n", + np->full_name, *id); + } + + return irqs; +} + +void fsl_pq_mdio_bus_name(char *name, struct device_node *np) +{ + const u32 *reg; + + reg = of_get_property(np, "reg", NULL); + + snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0); +} + +/* Scan the bus in reverse, looking for an empty spot */ +static int fsl_pq_mdio_find_free(struct mii_bus *new_bus) +{ + int i; + + for (i = PHY_MAX_ADDR; i > 0; i--) { + u32 phy_id; + + if (get_phy_id(new_bus, i, &phy_id)) + return -1; + + if (phy_id == 0xffffffff) + break; + } + + return i; +} + + +#ifdef CONFIG_GIANFAR +static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs) +{ + struct gfar __iomem *enet_regs; + + /* + * This is mildly evil, but so is our hardware for doing this. + * Also, we have to cast back to struct gfar because of + * definition weirdness done in gianfar.h. + */ + enet_regs = (struct gfar __iomem *) + ((char __iomem *)regs - offsetof(struct gfar, gfar_mii_regs)); + + return &enet_regs->tbipa; +} +#endif + + +#ifdef CONFIG_UCC_GETH +static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id) +{ + struct device_node *np = NULL; + int err = 0; + + for_each_compatible_node(np, NULL, "ucc_geth") { + struct resource tempres; + + err = of_address_to_resource(np, 0, &tempres); + if (err) + continue; + + /* if our mdio regs fall within this UCC regs range */ + if ((start >= tempres.start) && (end <= tempres.end)) { + /* Find the id of the UCC */ + const u32 *id; + + id = of_get_property(np, "cell-index", NULL); + if (!id) { + id = of_get_property(np, "device-id", NULL); + if (!id) + continue; + } + + *ucc_id = *id; + + return 0; + } + } + + if (err) + return err; + else + return -EINVAL; +} +#endif + + +static int fsl_pq_mdio_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->node; + struct device_node *tbi; + struct fsl_pq_mdio __iomem *regs; + u32 __iomem *tbipa; + struct mii_bus *new_bus; + int tbiaddr = -1; + u64 addr, size; + int err = 0; + + new_bus = mdiobus_alloc(); + if (NULL == new_bus) + return -ENOMEM; + + new_bus->name = "Freescale PowerQUICC MII Bus", + new_bus->read = &fsl_pq_mdio_read, + new_bus->write = &fsl_pq_mdio_write, + new_bus->reset = &fsl_pq_mdio_reset, + fsl_pq_mdio_bus_name(new_bus->id, np); + + /* Set the PHY base address */ + addr = of_translate_address(np, of_get_address(np, 0, &size, NULL)); + regs = ioremap(addr, size); + + if (NULL == regs) { + err = -ENOMEM; + goto err_free_bus; + } + + new_bus->priv = (void __force *)regs; + + new_bus->irq = create_irq_map(np); + + if (NULL == new_bus->irq) { + err = -ENOMEM; + goto err_unmap_regs; + } + + new_bus->parent = &ofdev->dev; + dev_set_drvdata(&ofdev->dev, new_bus); + + if (of_device_is_compatible(np, "fsl,gianfar-mdio") || + of_device_is_compatible(np, "gianfar")) { +#ifdef CONFIG_GIANFAR + tbipa = get_gfar_tbipa(regs); +#else + err = -ENODEV; + goto err_free_irqs; +#endif + } else if (of_device_is_compatible(np, "fsl,ucc-mdio") || + of_device_is_compatible(np, "ucc_geth_phy")) { +#ifdef CONFIG_UCC_GETH + u32 id; + + tbipa = ®s->utbipar; + + if ((err = get_ucc_id_for_range(addr, addr + size, &id))) + goto err_free_irqs; + + ucc_set_qe_mux_mii_mng(id - 1); +#else + err = -ENODEV; + goto err_free_irqs; +#endif + } else { + err = -ENODEV; + goto err_free_irqs; + } + + for_each_child_of_node(np, tbi) { + if (!strncmp(tbi->type, "tbi-phy", 8)) + break; + } + + if (tbi) { + const u32 *prop = of_get_property(tbi, "reg", NULL); + + if (prop) + tbiaddr = *prop; + } + + if (tbiaddr == -1) { + out_be32(tbipa, 0); + + tbiaddr = fsl_pq_mdio_find_free(new_bus); + } + + /* + * We define TBIPA at 0 to be illegal, opting to fail for boards that + * have PHYs at 1-31, rather than change tbipa and rescan. + */ + if (tbiaddr == 0) { + err = -EBUSY; + + goto err_free_irqs; + } + + out_be32(tbipa, tbiaddr); + + /* + * The TBIPHY-only buses will find PHYs at every address, + * so we mask them all but the TBI + */ + if (!of_device_is_compatible(np, "fsl,gianfar-mdio")) + new_bus->phy_mask = ~(1 << tbiaddr); + + err = mdiobus_register(new_bus); + + if (err) { + printk (KERN_ERR "%s: Cannot register as MDIO bus\n", + new_bus->name); + goto err_free_irqs; + } + + return 0; + +err_free_irqs: + kfree(new_bus->irq); +err_unmap_regs: + iounmap(regs); +err_free_bus: + kfree(new_bus); + + return err; +} + + +static int fsl_pq_mdio_remove(struct of_device *ofdev) +{ + struct device *device = &ofdev->dev; + struct mii_bus *bus = dev_get_drvdata(device); + + mdiobus_unregister(bus); + + dev_set_drvdata(device, NULL); + + iounmap((void __iomem *)bus->priv); + bus->priv = NULL; + mdiobus_free(bus); + + return 0; +} + +static struct of_device_id fsl_pq_mdio_match[] = { + { + .type = "mdio", + .compatible = "ucc_geth_phy", + }, + { + .type = "mdio", + .compatible = "gianfar", + }, + { + .compatible = "fsl,ucc-mdio", + }, + { + .compatible = "fsl,gianfar-tbi", + }, + { + .compatible = "fsl,gianfar-mdio", + }, + {}, +}; + +static struct of_platform_driver fsl_pq_mdio_driver = { + .name = "fsl-pq_mdio", + .probe = fsl_pq_mdio_probe, + .remove = fsl_pq_mdio_remove, + .match_table = fsl_pq_mdio_match, +}; + +int __init fsl_pq_mdio_init(void) +{ + return of_register_platform_driver(&fsl_pq_mdio_driver); +} + +void fsl_pq_mdio_exit(void) +{ + of_unregister_platform_driver(&fsl_pq_mdio_driver); +} +subsys_initcall_sync(fsl_pq_mdio_init); +module_exit(fsl_pq_mdio_exit); diff --git a/drivers/net/fsl_pq_mdio.h b/drivers/net/fsl_pq_mdio.h new file mode 100644 index 00000000000..36dad527410 --- /dev/null +++ b/drivers/net/fsl_pq_mdio.h @@ -0,0 +1,45 @@ +/* + * Freescale PowerQUICC MDIO Driver -- MII Management Bus Implementation + * Driver for the MDIO bus controller on Freescale PowerQUICC processors + * + * Author: Andy Fleming + * + * Copyright (c) 2002-2004,2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __FSL_PQ_MDIO_H +#define __FSL_PQ_MDIO_H + +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 +#define MIIMCFG_INIT_VALUE 0x00000007 +#define MIIMCFG_RESET 0x80000000 + +#define MII_READ_COMMAND 0x00000001 + +struct fsl_pq_mdio { + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ + u8 reserved[28]; /* Space holder */ + u32 utbipar; /* TBI phy address reg (only on UCC) */ +} __attribute__ ((packed)); + + +int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum); +int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); +int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id, + int regnum, u16 value); +int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs, int mii_id, int regnum); +int __init fsl_pq_mdio_init(void); +void fsl_pq_mdio_exit(void); +void fsl_pq_mdio_bus_name(char *name, struct device_node *np); +#endif /* FSL_PQ_MDIO_H */ diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index eb8302c5ba8..bd21b6d5f13 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -93,7 +93,7 @@ #include <linux/of.h> #include "gianfar.h" -#include "gianfar_mii.h" +#include "fsl_pq_mdio.h" #define TX_TIMEOUT (1*HZ) #undef BRIEF_GFAR_ERRORS @@ -253,7 +253,7 @@ static int gfar_of_init(struct net_device *dev) of_node_put(phy); of_node_put(mdio); - gfar_mdio_bus_name(bus_name, mdio); + fsl_pq_mdio_bus_name(bus_name, mdio); snprintf(priv->phy_bus_id, sizeof(priv->phy_bus_id), "%s:%02x", bus_name, *id); } @@ -420,7 +420,7 @@ static int gfar_probe(struct of_device *ofdev, priv->hash_width = 8; priv->hash_regs[0] = &priv->regs->gaddr0; - priv->hash_regs[1] = &priv->regs->gaddr1; + priv->hash_regs[1] = &priv->regs->gaddr1; priv->hash_regs[2] = &priv->regs->gaddr2; priv->hash_regs[3] = &priv->regs->gaddr3; priv->hash_regs[4] = &priv->regs->gaddr4; @@ -836,7 +836,7 @@ void stop_gfar(struct net_device *dev) free_irq(priv->interruptTransmit, dev); free_irq(priv->interruptReceive, dev); } else { - free_irq(priv->interruptTransmit, dev); + free_irq(priv->interruptTransmit, dev); } free_skb_resources(priv); @@ -1829,6 +1829,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) skb_put(skb, pkt_len); dev->stats.rx_bytes += pkt_len; + if (in_irq() || irqs_disabled()) + printk("Interrupt problem!\n"); gfar_process_frame(dev, skb, amount_pull); } else { @@ -2302,23 +2304,12 @@ static struct of_platform_driver gfar_driver = { static int __init gfar_init(void) { - int err = gfar_mdio_init(); - - if (err) - return err; - - err = of_register_platform_driver(&gfar_driver); - - if (err) - gfar_mdio_exit(); - - return err; + return of_register_platform_driver(&gfar_driver); } static void __exit gfar_exit(void) { of_unregister_platform_driver(&gfar_driver); - gfar_mdio_exit(); } module_init(gfar_init); diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 7820720ceee..3cb901b2e24 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -46,7 +46,6 @@ #include <linux/workqueue.h> #include <linux/ethtool.h> #include <linux/fsl_devices.h> -#include "gianfar_mii.h" /* The maximum number of packets to be handled in one call of gfar_poll */ #define GFAR_DEV_WEIGHT 64 @@ -126,9 +125,12 @@ extern const char gfar_driver_version[]; #define DEFAULT_RX_COALESCE 0 #define DEFAULT_RXCOUNT 0 -#define MIIMCFG_INIT_VALUE 0x00000007 -#define MIIMCFG_RESET 0x80000000 -#define MIIMIND_BUSY 0x00000001 +#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \ + | SUPPORTED_10baseT_Full \ + | SUPPORTED_100baseT_Half \ + | SUPPORTED_100baseT_Full \ + | SUPPORTED_Autoneg \ + | SUPPORTED_MII) /* TBI register addresses */ #define MII_TBICON 0x11 @@ -826,9 +828,6 @@ extern void gfar_halt(struct net_device *dev); extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, int enable, u32 regnum, u32 read); void gfar_init_sysfs(struct net_device *dev); -int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, - int regnum, u16 value); -int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum); extern const struct ethtool_ops gfar_ethtool_ops; diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h deleted file mode 100644 index 65c242cd468..00000000000 --- a/drivers/net/gianfar_mii.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * drivers/net/gianfar_mii.h - * - * Gianfar Ethernet Driver -- MII Management Bus Implementation - * Driver for the MDIO bus controller in the Gianfar register space - * - * Author: Andy Fleming - * Maintainer: Kumar Gala - * - * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef __GIANFAR_MII_H -#define __GIANFAR_MII_H - -struct gfar_private; /* forward ref */ - -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 - -#define MII_READ_COMMAND 0x00000001 - -#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \ - | SUPPORTED_10baseT_Full \ - | SUPPORTED_100baseT_Half \ - | SUPPORTED_100baseT_Full \ - | SUPPORTED_Autoneg \ - | SUPPORTED_MII) - -struct gfar_mii { - u32 miimcfg; /* 0x.520 - MII Management Config Register */ - u32 miimcom; /* 0x.524 - MII Management Command Register */ - u32 miimadd; /* 0x.528 - MII Management Address Register */ - u32 miimcon; /* 0x.52c - MII Management Control Register */ - u32 miimstat; /* 0x.530 - MII Management Status Register */ - u32 miimind; /* 0x.534 - MII Management Indicator Register */ -}; - -int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum); -int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); -int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, - int regnum, u16 value); -int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum); -struct mii_bus *gfar_get_miibus(const struct gfar_private *priv); -int __init gfar_mdio_init(void); -void gfar_mdio_exit(void); - -void gfar_mdio_bus_name(char *name, struct device_node *np); -#endif /* GIANFAR_PHY_H */ diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 4a8d5747204..1c095c63f98 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -39,7 +39,7 @@ #include <asm/ucc_fast.h> #include "ucc_geth.h" -#include "ucc_geth_mii.h" +#include "fsl_pq_mdio.h" #undef DEBUG @@ -1557,7 +1557,7 @@ static int init_phy(struct net_device *dev) of_node_put(phy); of_node_put(mdio); - uec_mdio_bus_name(bus_name, mdio); + fsl_pq_mdio_bus_name(bus_name, mdio); snprintf(phy_id, sizeof(phy_id), "%s:%02x", bus_name, *id); @@ -3657,7 +3657,8 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma if (err) return -1; - snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "%x", res.start); + snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "%x", + res.start&0xfffff); } /* get the phy interface type, or default to MII */ @@ -3803,11 +3804,6 @@ static int __init ucc_geth_init(void) { int i, ret; - ret = uec_mdio_init(); - - if (ret) - return ret; - if (netif_msg_drv(&debug)) printk(KERN_INFO "ucc_geth: " DRV_DESC "\n"); for (i = 0; i < 8; i++) @@ -3816,16 +3812,12 @@ static int __init ucc_geth_init(void) ret = of_register_platform_driver(&ucc_geth_driver); - if (ret) - uec_mdio_exit(); - return ret; } static void __exit ucc_geth_exit(void) { of_unregister_platform_driver(&ucc_geth_driver); - uec_mdio_exit(); } module_init(ucc_geth_init); diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 16cbe42ba43..66d18971fa0 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -28,8 +28,6 @@ #include <asm/ucc.h> #include <asm/ucc_fast.h> -#include "ucc_geth_mii.h" - #define DRV_DESC "QE UCC Gigabit Ethernet Controller" #define DRV_NAME "ucc_geth" #define DRV_VERSION "1.1" @@ -184,6 +182,18 @@ struct ucc_geth { #define UCCE_RX_EVENTS (UCCE_RXF | UCC_GETH_UCCE_BSY) #define UCCE_TX_EVENTS (UCCE_TXB | UCC_GETH_UCCE_TXE) +/* TBI defines */ +#define ENET_TBI_MII_CR 0x00 /* Control */ +#define ENET_TBI_MII_SR 0x01 /* Status */ +#define ENET_TBI_MII_ANA 0x04 /* AN advertisement */ +#define ENET_TBI_MII_ANLPBPA 0x05 /* AN link partner base page ability */ +#define ENET_TBI_MII_ANEX 0x06 /* AN expansion */ +#define ENET_TBI_MII_ANNPT 0x07 /* AN next page transmit */ +#define ENET_TBI_MII_ANLPANP 0x08 /* AN link partner ability next page */ +#define ENET_TBI_MII_EXST 0x0F /* Extended status */ +#define ENET_TBI_MII_JD 0x10 /* Jitter diagnostics */ +#define ENET_TBI_MII_TBICON 0x11 /* TBI control */ + /* UCC GETH MACCFG1 (MAC Configuration 1 Register) */ #define MACCFG1_FLOW_RX 0x00000020 /* Flow Control Rx */ diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 68a7f541413..a755bea559b 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -39,7 +39,6 @@ #include <asm/types.h> #include "ucc_geth.h" -#include "ucc_geth_mii.h" static char hw_stat_gstrings[][ETH_GSTRING_LEN] = { "tx-64-frames", diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c deleted file mode 100644 index 54635911305..00000000000 --- a/drivers/net/ucc_geth_mii.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * drivers/net/ucc_geth_mii.c - * - * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation - * Provides Bus interface for MII Management regs in the UCC register space - * - * Copyright (C) 2007 Freescale Semiconductor, Inc. - * - * Authors: Li Yang <leoli@freescale.com> - * Kim Phillips <kim.phillips@freescale.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/unistd.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/crc32.h> -#include <linux/mii.h> -#include <linux/phy.h> -#include <linux/fsl_devices.h> -#include <linux/of_platform.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/ucc.h> - -#include "ucc_geth_mii.h" -#include "ucc_geth.h" - -#define DEBUG -#ifdef DEBUG -#define vdbg(format, arg...) printk(KERN_DEBUG , format "\n" , ## arg) -#else -#define vdbg(format, arg...) do {} while(0) -#endif - -#define MII_DRV_DESC "QE UCC Ethernet Controller MII Bus" -#define MII_DRV_NAME "fsl-uec_mdio" - -/* Write value to the PHY for this device to the register at regnum, */ -/* waiting until the write is done before it returns. All PHY */ -/* configuration has to be done through the master UEC MIIM regs */ -int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) -{ - struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; - - /* Setting up the MII Mangement Address Register */ - out_be32(®s->miimadd, - (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum); - - /* Setting up the MII Mangement Control Register with the value */ - out_be32(®s->miimcon, value); - - /* Wait till MII management write is complete */ - while ((in_be32(®s->miimind)) & MIIMIND_BUSY) - cpu_relax(); - - return 0; -} - -/* Reads from register regnum in the PHY for device dev, */ -/* returning the value. Clears miimcom first. All PHY */ -/* configuration has to be done through the TSEC1 MIIM regs */ -int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum) -{ - struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; - u16 value; - - /* Setting up the MII Mangement Address Register */ - out_be32(®s->miimadd, - (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum); - - /* Clear miimcom, perform an MII management read cycle */ - out_be32(®s->miimcom, 0); - out_be32(®s->miimcom, MIIMCOM_READ_CYCLE); - - /* Wait till MII management write is complete */ - while ((in_be32(®s->miimind)) & (MIIMIND_BUSY | MIIMIND_NOT_VALID)) - cpu_relax(); - - /* Read MII management status */ - value = in_be32(®s->miimstat); - - return value; -} - -/* Reset the MIIM registers, and wait for the bus to free */ -static int uec_mdio_reset(struct mii_bus *bus) -{ - struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; - unsigned int timeout = PHY_INIT_TIMEOUT; - - mutex_lock(&bus->mdio_lock); - - /* Reset the management interface */ - out_be32(®s->miimcfg, MIIMCFG_RESET_MANAGEMENT); - - /* Setup the MII Mgmt clock speed */ - out_be32(®s->miimcfg, MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112); - - /* Wait until the bus is free */ - while ((in_be32(®s->miimind) & MIIMIND_BUSY) && timeout--) - cpu_relax(); - - mutex_unlock(&bus->mdio_lock); - - if (timeout <= 0) { - printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name); - return -EBUSY; - } - - return 0; -} - -static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *match) -{ - struct device *device = &ofdev->dev; - struct device_node *np = ofdev->node, *tempnp = NULL; - struct device_node *child = NULL; - struct ucc_mii_mng __iomem *regs; - struct mii_bus *new_bus; - struct resource res; - int k, err = 0; - - new_bus = mdiobus_alloc(); - if (NULL == new_bus) - return -ENOMEM; - - new_bus->name = "UCC Ethernet Controller MII Bus"; - new_bus->read = &uec_mdio_read; - new_bus->write = &uec_mdio_write; - new_bus->reset = &uec_mdio_reset; - - memset(&res, 0, sizeof(res)); - - err = of_address_to_resource(np, 0, &res); - if (err) - goto reg_map_fail; - - uec_mdio_bus_name(new_bus->id, np); - - new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL); - - if (NULL == new_bus->irq) { - err = -ENOMEM; - goto reg_map_fail; - } - - for (k = 0; k < 32; k++) - new_bus->irq[k] = PHY_POLL; - - while ((child = of_get_next_child(np, child)) != NULL) { - int irq = irq_of_parse_and_map(child, 0); - if (irq != NO_IRQ) { - const u32 *id = of_get_property(child, "reg", NULL); - new_bus->irq[*id] = irq; - } - } - - /* Set the base address */ - regs = ioremap(res.start, sizeof(struct ucc_mii_mng)); - - if (NULL == regs) { - err = -ENOMEM; - goto ioremap_fail; - } - - new_bus->priv = (void __force *)regs; - - new_bus->parent = device; - dev_set_drvdata(device, new_bus); - - /* Read MII management master from device tree */ - while ((tempnp = of_find_compatible_node(tempnp, "network", "ucc_geth")) - != NULL) { - struct resource tempres; - - err = of_address_to_resource(tempnp, 0, &tempres); - if (err) - goto bus_register_fail; - - /* if our mdio regs fall within this UCC regs range */ - if ((res.start >= tempres.start) && - (res.end <= tempres.end)) { - /* set this UCC to be the MII master */ - const u32 *id; - - id = of_get_property(tempnp, "cell-index", NULL); - if (!id) { - id = of_get_property(tempnp, "device-id", NULL); - if (!id) - goto bus_register_fail; - } - - ucc_set_qe_mux_mii_mng(*id - 1); - - /* assign the TBI an address which won't - * conflict with the PHYs */ - out_be32(®s->utbipar, UTBIPAR_INIT_TBIPA); - break; - } - } - - err = mdiobus_register(new_bus); - if (0 != err) { - printk(KERN_ERR "%s: Cannot register as MDIO bus\n", - new_bus->name); - goto bus_register_fail; - } - - return 0; - -bus_register_fail: - iounmap(regs); -ioremap_fail: - kfree(new_bus->irq); -reg_map_fail: - mdiobus_free(new_bus); - - return err; -} - -static int uec_mdio_remove(struct of_device *ofdev) -{ - struct device *device = &ofdev->dev; - struct mii_bus *bus = dev_get_drvdata(device); - - mdiobus_unregister(bus); - - dev_set_drvdata(device, NULL); - - iounmap((void __iomem *)bus->priv); - bus->priv = NULL; - mdiobus_free(bus); - - return 0; -} - -static struct of_device_id uec_mdio_match[] = { - { - .type = "mdio", - .compatible = "ucc_geth_phy", - }, - { - .compatible = "fsl,ucc-mdio", - }, - {}, -}; - -static struct of_platform_driver uec_mdio_driver = { - .name = MII_DRV_NAME, - .probe = uec_mdio_probe, - .remove = uec_mdio_remove, - .match_table = uec_mdio_match, -}; - -int __init uec_mdio_init(void) -{ - return of_register_platform_driver(&uec_mdio_driver); -} - -/* called from __init ucc_geth_init, therefore can not be __exit */ -void uec_mdio_exit(void) -{ - of_unregister_platform_driver(&uec_mdio_driver); -} - -void uec_mdio_bus_name(char *name, struct device_node *np) -{ - const u32 *reg; - - reg = of_get_property(np, "reg", NULL); - - snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0); -} - diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h deleted file mode 100644 index 840cf80235b..00000000000 --- a/drivers/net/ucc_geth_mii.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * drivers/net/ucc_geth_mii.h - * - * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation - * Provides Bus interface for MII Management regs in the UCC register space - * - * Copyright (C) 2007 Freescale Semiconductor, Inc. - * - * Authors: Li Yang <leoli@freescale.com> - * Kim Phillips <kim.phillips@freescale.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef __UEC_MII_H -#define __UEC_MII_H - -/* UCC GETH MIIMCFG (MII Management Configuration Register) */ -#define MIIMCFG_RESET_MANAGEMENT 0x80000000 /* Reset - management */ -#define MIIMCFG_NO_PREAMBLE 0x00000010 /* Preamble - suppress */ -#define MIIMCFG_CLOCK_DIVIDE_SHIFT (31 - 31) /* clock divide - << shift */ -#define MIIMCFG_CLOCK_DIVIDE_MAX 0xf /* max clock divide */ -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_2 0x00000000 -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_4 0x00000001 -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_6 0x00000002 -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_8 0x00000003 -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10 0x00000004 -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_14 0x00000005 -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_16 0x00000008 -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_20 0x00000006 -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_28 0x00000007 -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_32 0x00000009 -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_48 0x0000000a -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_64 0x0000000b -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_80 0x0000000c -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112 0x0000000d -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_160 0x0000000e -#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_224 0x0000000f - -/* UCC GETH MIIMCOM (MII Management Command Register) */ -#define MIIMCOM_SCAN_CYCLE 0x00000002 /* Scan cycle */ -#define MIIMCOM_READ_CYCLE 0x00000001 /* Read cycle */ - -/* UCC GETH MIIMADD (MII Management Address Register) */ -#define MIIMADD_PHY_ADDRESS_SHIFT (31 - 23) /* PHY Address - << shift */ -#define MIIMADD_PHY_REGISTER_SHIFT (31 - 31) /* PHY Register - << shift */ - -/* UCC GETH MIIMCON (MII Management Control Register) */ -#define MIIMCON_PHY_CONTROL_SHIFT (31 - 31) /* PHY Control - << shift */ -#define MIIMCON_PHY_STATUS_SHIFT (31 - 31) /* PHY Status - << shift */ - -/* UCC GETH MIIMIND (MII Management Indicator Register) */ -#define MIIMIND_NOT_VALID 0x00000004 /* Not valid */ -#define MIIMIND_SCAN 0x00000002 /* Scan in - progress */ -#define MIIMIND_BUSY 0x00000001 - -/* Initial TBI Physical Address */ -#define UTBIPAR_INIT_TBIPA 0x1f - -struct ucc_mii_mng { - u32 miimcfg; /* MII management configuration reg */ - u32 miimcom; /* MII management command reg */ - u32 miimadd; /* MII management address reg */ - u32 miimcon; /* MII management control reg */ - u32 miimstat; /* MII management status reg */ - u32 miimind; /* MII management indication reg */ - u8 notcare[28]; /* Space holder */ - u32 utbipar; /* TBI phy address reg */ -} __attribute__ ((packed)); - -/* TBI / MII Set Register */ -enum enet_tbi_mii_reg { - ENET_TBI_MII_CR = 0x00, /* Control */ - ENET_TBI_MII_SR = 0x01, /* Status */ - ENET_TBI_MII_ANA = 0x04, /* AN advertisement */ - ENET_TBI_MII_ANLPBPA = 0x05, /* AN link partner base page ability */ - ENET_TBI_MII_ANEX = 0x06, /* AN expansion */ - ENET_TBI_MII_ANNPT = 0x07, /* AN next page transmit */ - ENET_TBI_MII_ANLPANP = 0x08, /* AN link partner ability next page */ - ENET_TBI_MII_EXST = 0x0F, /* Extended status */ - ENET_TBI_MII_JD = 0x10, /* Jitter diagnostics */ - ENET_TBI_MII_TBICON = 0x11 /* TBI control */ -}; - -int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum); -int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); -int __init uec_mdio_init(void); -void uec_mdio_exit(void); -void uec_mdio_bus_name(char *name, struct device_node *np); -#endif /* __UEC_MII_H */ |