summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/scsi/lpfc/lpfc.h22
-rw-r--r--drivers/scsi/lpfc/lpfc_ct.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_debugfs.c52
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h63
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c28
-rw-r--r--drivers/scsi/lpfc/lpfc_mbox.c75
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c163
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c122
9 files changed, 314 insertions, 219 deletions
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index e0e018d1265..327eeb05108 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -407,10 +407,11 @@ struct lpfc_hba {
struct lpfc_sli sli;
uint32_t sli_rev; /* SLI2 or SLI3 */
uint32_t sli3_options; /* Mask of enabled SLI3 options */
-#define LPFC_SLI3_ENABLED 0x01
-#define LPFC_SLI3_HBQ_ENABLED 0x02
-#define LPFC_SLI3_NPIV_ENABLED 0x04
-#define LPFC_SLI3_VPORT_TEARDOWN 0x08
+#define LPFC_SLI3_HBQ_ENABLED 0x01
+#define LPFC_SLI3_NPIV_ENABLED 0x02
+#define LPFC_SLI3_VPORT_TEARDOWN 0x04
+#define LPFC_SLI3_CRP_ENABLED 0x08
+#define LPFC_SLI3_INB_ENABLED 0x10
uint32_t iocb_cmd_size;
uint32_t iocb_rsp_size;
@@ -422,10 +423,16 @@ struct lpfc_hba {
#define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */
#define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */
- struct lpfc_sli2_slim *slim2p;
- struct lpfc_dmabuf hbqslimp;
+ struct lpfc_dmabuf slim2p;
+
+ MAILBOX_t *mbox;
+ uint32_t *inb_ha_copy;
+ uint32_t *inb_counter;
+ uint32_t inb_last_counter;
+ struct _PCB *pcb;
+ struct _IOCB *IOCBs;
- dma_addr_t slim2p_mapping;
+ struct lpfc_dmabuf hbqslimp;
uint16_t pci_cfg_value;
@@ -514,6 +521,7 @@ struct lpfc_hba {
void __iomem *HCregaddr; /* virtual address for host ctl reg */
struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */
+ struct lpfc_pgp *port_gp;
uint32_t __iomem *hbq_put; /* Address in SLIM to HBQ put ptrs */
uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 7fc74cf5823..0f387862cf7 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -212,7 +212,7 @@ lpfc_alloc_ct_rsp(struct lpfc_hba *phba, int cmdcode, struct ulp_bde64 *bpl,
else
list_add_tail(&mp->list, &mlist->list);
- bpl->tus.f.bdeFlags = BUFF_USE_RCV;
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
/* build buffer ptr list for IOCB */
bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys) );
bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys) );
@@ -283,7 +283,7 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
icmd->un.genreq64.bdl.ulpIoTag32 = 0;
icmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys);
icmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys);
- icmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BDL;
+ icmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
icmd->un.genreq64.bdl.bdeSize = (num_entry * sizeof (struct ulp_bde64));
if (usr_flg)
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 2588eadffbb..2f6d34924b7 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -454,7 +454,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
spin_lock_irq(&phba->hbalock);
len += snprintf(buf+len, size-len, "SLIM Mailbox\n");
- ptr = (uint32_t *)phba->slim2p;
+ ptr = (uint32_t *)phba->slim2p.virt;
i = sizeof(MAILBOX_t);
while (i > 0) {
len += snprintf(buf+len, size-len,
@@ -467,7 +467,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
}
len += snprintf(buf+len, size-len, "SLIM PCB\n");
- ptr = (uint32_t *)&phba->slim2p->pcb;
+ ptr = (uint32_t *)phba->pcb;
i = sizeof(PCB_t);
while (i > 0) {
len += snprintf(buf+len, size-len,
@@ -479,44 +479,16 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
off += (8 * sizeof(uint32_t));
}
- pgpp = (struct lpfc_pgp *)&phba->slim2p->mbx.us.s3_pgp.port;
- pring = &psli->ring[0];
- len += snprintf(buf+len, size-len,
- "Ring 0: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) "
- "RSP PutInx:%d Max:%d\n",
- pgpp->cmdGetInx, pring->numCiocb,
- pring->next_cmdidx, pring->local_getidx, pring->flag,
- pgpp->rspPutInx, pring->numRiocb);
- pgpp++;
-
- pring = &psli->ring[1];
- len += snprintf(buf+len, size-len,
- "Ring 1: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) "
- "RSP PutInx:%d Max:%d\n",
- pgpp->cmdGetInx, pring->numCiocb,
- pring->next_cmdidx, pring->local_getidx, pring->flag,
- pgpp->rspPutInx, pring->numRiocb);
- pgpp++;
-
- pring = &psli->ring[2];
- len += snprintf(buf+len, size-len,
- "Ring 2: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) "
- "RSP PutInx:%d Max:%d\n",
- pgpp->cmdGetInx, pring->numCiocb,
- pring->next_cmdidx, pring->local_getidx, pring->flag,
- pgpp->rspPutInx, pring->numRiocb);
- pgpp++;
-
- pring = &psli->ring[3];
- len += snprintf(buf+len, size-len,
- "Ring 3: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) "
- "RSP PutInx:%d Max:%d\n",
- pgpp->cmdGetInx, pring->numCiocb,
- pring->next_cmdidx, pring->local_getidx, pring->flag,
- pgpp->rspPutInx, pring->numRiocb);
-
-
- ptr = (uint32_t *)&phba->slim2p->mbx.us.s3_pgp.hbq_get;
+ for (i = 0; i < 4; i++) {
+ pgpp = &phba->port_gp[i];
+ pring = &psli->ring[i];
+ len += snprintf(buf+len, size-len,
+ "Ring %d: CMD GetInx:%d (Max:%d Next:%d "
+ "Local:%d flg:x%x) RSP PutInx:%d Max:%d\n",
+ i, pgpp->cmdGetInx, pring->numCiocb,
+ pring->next_cmdidx, pring->local_getidx,
+ pring->flag, pgpp->rspPutInx, pring->numRiocb);
+ }
word0 = readl(phba->HAregaddr);
word1 = readl(phba->CAregaddr);
word2 = readl(phba->HSregaddr);
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 2e24b4fe2be..89bd9ab46de 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -200,7 +200,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
- icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BDL;
+ icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
icmd->un.elsreq64.remoteID = did; /* DID */
if (expectRsp) {
icmd->un.elsreq64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
@@ -235,7 +235,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
bpl->addrLow = le32_to_cpu(putPaddrLow(prsp->phys));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(prsp->phys));
bpl->tus.f.bdeSize = FCELSSIZE;
- bpl->tus.f.bdeFlags = BUFF_USE_RCV;
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
}
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 7773b949aa7..a986332fecf 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1474,24 +1474,18 @@ struct ulp_bde64 { /* SLI-2 */
uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
VALUE !! */
#endif
-
-#define BUFF_USE_RSVD 0x01 /* bdeFlags */
-#define BUFF_USE_INTRPT 0x02 /* Not Implemented with LP6000 */
-#define BUFF_USE_CMND 0x04 /* Optional, 1=cmd/rsp 0=data buffer */
-#define BUFF_USE_RCV 0x08 /* "" "", 1=rcv buffer, 0=xmit
- buffer */
-#define BUFF_TYPE_32BIT 0x10 /* "" "", 1=32 bit addr 0=64 bit
- addr */
-#define BUFF_TYPE_SPECIAL 0x20 /* Not Implemented with LP6000 */
-#define BUFF_TYPE_BDL 0x40 /* Optional, may be set in BDL */
-#define BUFF_TYPE_INVALID 0x80 /* "" "" */
+#define BUFF_TYPE_BDE_64 0x00 /* BDE (Host_resident) */
+#define BUFF_TYPE_BDE_IMMED 0x01 /* Immediate Data BDE */
+#define BUFF_TYPE_BDE_64P 0x02 /* BDE (Port-resident) */
+#define BUFF_TYPE_BDE_64I 0x08 /* Input BDE (Host-resident) */
+#define BUFF_TYPE_BDE_64IP 0x0A /* Input BDE (Port-resident) */
+#define BUFF_TYPE_BLP_64 0x40 /* BLP (Host-resident) */
+#define BUFF_TYPE_BLP_64P 0x42 /* BLP (Port-resident) */
} f;
} tus;
uint32_t addrLow;
uint32_t addrHigh;
};
-#define BDE64_SIZE_WORD 0
-#define BPL64_SIZE_WORD 0x40
typedef struct ULP_BDL { /* SLI-2 */
#ifdef __BIG_ENDIAN_BITFIELD
@@ -2715,11 +2709,19 @@ struct sli3_pgp {
uint32_t hbq_get[16];
};
-typedef union {
- struct sli2_desc s2;
- struct sli3_desc s3;
- struct sli3_pgp s3_pgp;
-} SLI_VAR;
+struct sli3_inb_pgp {
+ uint32_t ha_copy;
+ uint32_t counter;
+ struct lpfc_pgp port[MAX_RINGS];
+ uint32_t hbq_get[16];
+};
+
+union sli_var {
+ struct sli2_desc s2;
+ struct sli3_desc s3;
+ struct sli3_pgp s3_pgp;
+ struct sli3_inb_pgp s3_inb_pgp;
+};
typedef struct {
#ifdef __BIG_ENDIAN_BITFIELD
@@ -2737,7 +2739,7 @@ typedef struct {
#endif
MAILVARIANTS un;
- SLI_VAR us;
+ union sli_var us;
} MAILBOX_t;
/*
@@ -3105,6 +3107,27 @@ struct que_xri64cx_ext_fields {
struct lpfc_hbq_entry buff[5];
};
+#define LPFC_EXT_DATA_BDE_COUNT 3
+struct fcp_irw_ext {
+ uint32_t io_tag64_low;
+ uint32_t io_tag64_high;
+#ifdef __BIG_ENDIAN_BITFIELD
+ uint8_t reserved1;
+ uint8_t reserved2;
+ uint8_t reserved3;
+ uint8_t ebde_count;
+#else /* __LITTLE_ENDIAN */
+ uint8_t ebde_count;
+ uint8_t reserved3;
+ uint8_t reserved2;
+ uint8_t reserved1;
+#endif
+ uint32_t reserved4;
+ struct ulp_bde64 rbde; /* response bde */
+ struct ulp_bde64 dbde[LPFC_EXT_DATA_BDE_COUNT]; /* data BDE or BPL */
+ uint8_t icd[32]; /* immediate command data (32 bytes) */
+};
+
typedef struct _IOCB { /* IOCB structure */
union {
GENERIC_RSP grsp; /* Generic response */
@@ -3190,7 +3213,7 @@ typedef struct _IOCB { /* IOCB structure */
/* words 8-31 used for que_xri_cx iocb */
struct que_xri64cx_ext_fields que_xri64cx_ext_words;
-
+ struct fcp_irw_ext fcp_ext;
uint32_t sli3Words[24]; /* 96 extra bytes for SLI-3 */
} unsli3;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 93fd09daca8..6a7a039e890 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2312,12 +2312,18 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
}
/* Allocate memory for SLI-2 structures */
- phba->slim2p = dma_alloc_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE,
- &phba->slim2p_mapping, GFP_KERNEL);
- if (!phba->slim2p)
+ phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev,
+ SLI2_SLIM_SIZE,
+ &phba->slim2p.phys,
+ GFP_KERNEL);
+ if (!phba->slim2p.virt)
goto out_iounmap;
- memset(phba->slim2p, 0, SLI2_SLIM_SIZE);
+ memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
+ phba->mbox = phba->slim2p.virt;
+ phba->pcb = (phba->slim2p.virt + sizeof(MAILBOX_t));
+ phba->IOCBs = (phba->slim2p.virt + sizeof(MAILBOX_t) +
+ sizeof(struct _PCB));
phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev,
lpfc_sli_hbq_size(),
@@ -2513,11 +2519,11 @@ out_free_iocbq:
}
lpfc_mem_free(phba);
out_free_hbqslimp:
- dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt,
- phba->hbqslimp.phys);
+ dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
+ phba->hbqslimp.virt, phba->hbqslimp.phys);
out_free_slim:
- dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, phba->slim2p,
- phba->slim2p_mapping);
+ dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+ phba->slim2p.virt, phba->slim2p.phys);
out_iounmap:
iounmap(phba->ctrl_regs_memmap_p);
out_iounmap_slim:
@@ -2599,12 +2605,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
lpfc_scsi_free(phba);
lpfc_mem_free(phba);
- dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt,
- phba->hbqslimp.phys);
+ dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
+ phba->hbqslimp.virt, phba->hbqslimp.phys);
/* Free resources associated with SLI2 interface */
dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
- phba->slim2p, phba->slim2p_mapping);
+ phba->slim2p.virt, phba->slim2p.phys);
/* unmap adapter SLIM and Control Registers */
iounmap(phba->ctrl_regs_memmap_p);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 7413bfdf89a..ca358355ec9 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -671,7 +671,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
- PCB_t *pcbp = &phba->slim2p->pcb;
+ PCB_t *pcbp = phba->pcb;
dma_addr_t pdma_addr;
uint32_t offset;
uint32_t iocbCnt = 0;
@@ -700,23 +700,23 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
continue;
}
/* Command ring setup for ring */
- pring->cmdringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt];
+ pring->cmdringaddr = (void *)&phba->IOCBs[iocbCnt];
pcbp->rdsc[i].cmdEntries = pring->numCiocb;
- offset = (uint8_t *) &phba->slim2p->IOCBs[iocbCnt] -
- (uint8_t *) phba->slim2p;
- pdma_addr = phba->slim2p_mapping + offset;
+ offset = (uint8_t *) &phba->IOCBs[iocbCnt] -
+ (uint8_t *) phba->slim2p.virt;
+ pdma_addr = phba->slim2p.phys + offset;
pcbp->rdsc[i].cmdAddrHigh = putPaddrHigh(pdma_addr);
pcbp->rdsc[i].cmdAddrLow = putPaddrLow(pdma_addr);
iocbCnt += pring->numCiocb;
/* Response ring setup for ring */
- pring->rspringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt];
+ pring->rspringaddr = (void *) &phba->IOCBs[iocbCnt];
pcbp->rdsc[i].rspEntries = pring->numRiocb;
- offset = (uint8_t *)&phba->slim2p->IOCBs[iocbCnt] -
- (uint8_t *)phba->slim2p;
- pdma_addr = phba->slim2p_mapping + offset;
+ offset = (uint8_t *)&phba->IOCBs[iocbCnt] -
+ (uint8_t *)phba->slim2p.virt;
+ pdma_addr = phba->slim2p.phys + offset;
pcbp->rdsc[i].rspAddrHigh = putPaddrHigh(pdma_addr);
pcbp->rdsc[i].rspAddrLow = putPaddrLow(pdma_addr);
iocbCnt += pring->numRiocb;
@@ -977,8 +977,8 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
mb->un.varCfgPort.pcbLen = sizeof(PCB_t);
- offset = (uint8_t *)&phba->slim2p->pcb - (uint8_t *)phba->slim2p;
- pdma_addr = phba->slim2p_mapping + offset;
+ offset = (uint8_t *)phba->pcb - (uint8_t *)phba->slim2p.virt;
+ pdma_addr = phba->slim2p.phys + offset;
mb->un.varCfgPort.pcbLow = putPaddrLow(pdma_addr);
mb->un.varCfgPort.pcbHigh = putPaddrHigh(pdma_addr);
@@ -986,12 +986,13 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) {
mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
+ mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
+ mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */
mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
if (phba->max_vpi && phba->cfg_enable_npiv &&
phba->vpd.sli3Feat.cmv) {
mb->un.varCfgPort.max_vpi = phba->max_vpi;
mb->un.varCfgPort.cmv = 1;
- phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
} else
mb->un.varCfgPort.max_vpi = phba->max_vpi = 0;
} else
@@ -999,16 +1000,15 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
mb->un.varCfgPort.sli_mode = phba->sli_rev;
/* Now setup pcb */
- phba->slim2p->pcb.type = TYPE_NATIVE_SLI2;
- phba->slim2p->pcb.feature = FEATURE_INITIAL_SLI2;
+ phba->pcb->type = TYPE_NATIVE_SLI2;
+ phba->pcb->feature = FEATURE_INITIAL_SLI2;
/* Setup Mailbox pointers */
- phba->slim2p->pcb.mailBoxSize = offsetof(MAILBOX_t, us) +
- sizeof(struct sli2_desc);
- offset = (uint8_t *)&phba->slim2p->mbx - (uint8_t *)phba->slim2p;
- pdma_addr = phba->slim2p_mapping + offset;
- phba->slim2p->pcb.mbAddrHigh = putPaddrHigh(pdma_addr);
- phba->slim2p->pcb.mbAddrLow = putPaddrLow(pdma_addr);
+ phba->pcb->mailBoxSize = sizeof(MAILBOX_t);
+ offset = (uint8_t *)phba->mbox - (uint8_t *)phba->slim2p.virt;
+ pdma_addr = phba->slim2p.phys + offset;
+ phba->pcb->mbAddrHigh = putPaddrHigh(pdma_addr);
+ phba->pcb->mbAddrLow = putPaddrLow(pdma_addr);
/*
* Setup Host Group ring pointer.
@@ -1069,13 +1069,13 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/* mask off BAR0's flag bits 0 - 3 */
- phba->slim2p->pcb.hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) +
- (void __iomem *) phba->host_gp -
+ phba->pcb->hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) +
+ (void __iomem *)phba->host_gp -
(void __iomem *)phba->MBslimaddr;
if (bar_low & PCI_BASE_ADDRESS_MEM_TYPE_64)
- phba->slim2p->pcb.hgpAddrHigh = bar_high;
+ phba->pcb->hgpAddrHigh = bar_high;
else
- phba->slim2p->pcb.hgpAddrHigh = 0;
+ phba->pcb->hgpAddrHigh = 0;
/* write HGP data to SLIM at the required longword offset */
memset(&hgp, 0, sizeof(struct lpfc_hgp));
@@ -1085,17 +1085,19 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/* Setup Port Group ring pointer */
- if (phba->sli_rev == 3)
- pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s3_pgp.port -
- (uint8_t *)phba->slim2p;
- else
- pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s2.port -
- (uint8_t *)phba->slim2p;
-
- pdma_addr = phba->slim2p_mapping + pgp_offset;
- phba->slim2p->pcb.pgpAddrHigh = putPaddrHigh(pdma_addr);
- phba->slim2p->pcb.pgpAddrLow = putPaddrLow(pdma_addr);
- phba->hbq_get = &phba->slim2p->mbx.us.s3_pgp.hbq_get[0];
+ if (phba->sli3_options & LPFC_SLI3_INB_ENABLED) {
+ pgp_offset = offsetof(struct lpfc_sli2_slim,
+ mbx.us.s3_inb_pgp.port);
+ phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get;
+ } else if (phba->sli_rev == 3) {
+ pgp_offset = offsetof(struct lpfc_sli2_slim,
+ mbx.us.s3_pgp.port);
+ phba->hbq_get = phba->mbox->us.s3_pgp.hbq_get;
+ } else
+ pgp_offset = offsetof(struct lpfc_sli2_slim, mbx.us.s2.port);
+ pdma_addr = phba->slim2p.phys + pgp_offset;
+ phba->pcb->pgpAddrHigh = putPaddrHigh(pdma_addr);
+ phba->pcb->pgpAddrLow = putPaddrLow(pdma_addr);
/* Use callback routine to setp rings in the pcb */
lpfc_config_pcb_setup(phba);
@@ -1110,8 +1112,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/* Swap PCB if needed */
- lpfc_sli_pcimem_bcopy(&phba->slim2p->pcb, &phba->slim2p->pcb,
- sizeof(PCB_t));
+ lpfc_sli_pcimem_bcopy(phba->pcb, phba->pcb, sizeof(PCB_t));
}
/**
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index a22bdf9548a..c1bb90cf0d0 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -198,7 +198,9 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
struct lpfc_scsi_buf *psb;
struct ulp_bde64 *bpl;
IOCB_t *iocb;
- dma_addr_t pdma_phys;
+ dma_addr_t pdma_phys_fcp_cmd;
+ dma_addr_t pdma_phys_fcp_rsp;
+ dma_addr_t pdma_phys_bpl;
uint16_t iotag;
psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
@@ -238,40 +240,60 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
/* Initialize local short-hand pointers. */
bpl = psb->fcp_bpl;
- pdma_phys = psb->dma_handle;
+ pdma_phys_fcp_cmd = psb->dma_handle;
+ pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
+ pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp);
/*
* The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg
* list bdes. Initialize the first two and leave the rest for
* queuecommand.
*/
- bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
- bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
- bpl->tus.f.bdeSize = sizeof (struct fcp_cmnd);
- bpl->tus.f.bdeFlags = BUFF_USE_CMND;
- bpl->tus.w = le32_to_cpu(bpl->tus.w);
- bpl++;
+ bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
+ bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
+ bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
+ bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[0].tus.w = le32_to_cpu(bpl->tus.w);
/* Setup the physical region for the FCP RSP */
- pdma_phys += sizeof (struct fcp_cmnd);
- bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
- bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
- bpl->tus.f.bdeSize = sizeof (struct fcp_rsp);
- bpl->tus.f.bdeFlags = (BUFF_USE_CMND | BUFF_USE_RCV);
- bpl->tus.w = le32_to_cpu(bpl->tus.w);
+ bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
+ bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
+ bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
+ bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[1].tus.w = le32_to_cpu(bpl->tus.w);
/*
* Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
* initialize it with all known data now.
*/
- pdma_phys += (sizeof (struct fcp_rsp));
iocb = &psb->cur_iocbq.iocb;
iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
- iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys);
- iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys);
- iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDL;
- iocb->ulpBdeCount = 1;
+ if (phba->sli_rev == 3) {
+ /* fill in immediate fcp command BDE */
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+ iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
+ unsli3.fcp_ext.icd);
+ iocb->un.fcpi64.bdl.addrHigh = 0;
+ iocb->ulpBdeCount = 0;
+ iocb->ulpLe = 0;
+ /* fill in responce BDE */
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
+ sizeof(struct fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrLow =
+ putPaddrLow(pdma_phys_fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrHigh =
+ putPaddrHigh(pdma_phys_fcp_rsp);
+ } else {
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+ iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
+ iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl);
+ iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl);
+ iocb->ulpBdeCount = 1;
+ iocb->ulpLe = 1;
+ }
iocb->ulpClass = CLASS3;
return psb;
@@ -313,8 +335,9 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+ struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde;
dma_addr_t physaddr;
- uint32_t i, num_bde = 0;
+ uint32_t num_bde = 0;
int nseg, datadir = scsi_cmnd->sc_data_direction;
/*
@@ -352,33 +375,64 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
* during probe that limits the number of sg elements in any
* single scsi command. Just run through the seg_cnt and format
* the bde's.
+ * When using SLI-3 the driver will try to fit all the BDEs into
+ * the IOCB. If it can't then the BDEs get added to a BPL as it
+ * does for SLI-2 mode.
*/
- scsi_for_each_sg(scsi_cmnd, sgel, nseg, i) {
+ scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
physaddr = sg_dma_address(sgel);
- bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
- bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
- bpl->tus.f.bdeSize = sg_dma_len(sgel);
- if (datadir == DMA_TO_DEVICE)
- bpl->tus.f.bdeFlags = 0;
- else
- bpl->tus.f.bdeFlags = BUFF_USE_RCV;
- bpl->tus.w = le32_to_cpu(bpl->tus.w);
- bpl++;
- num_bde++;
+ if (phba->sli_rev == 3 &&
+ nseg <= LPFC_EXT_DATA_BDE_COUNT) {
+ data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ data_bde->tus.f.bdeSize = sg_dma_len(sgel);
+ data_bde->addrLow = putPaddrLow(physaddr);
+ data_bde->addrHigh = putPaddrHigh(physaddr);
+ data_bde++;
+ } else {
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl->tus.f.bdeSize = sg_dma_len(sgel);
+ bpl->tus.w = le32_to_cpu(bpl->tus.w);
+ bpl->addrLow =
+ le32_to_cpu(putPaddrLow(physaddr));
+ bpl->addrHigh =
+ le32_to_cpu(putPaddrHigh(physaddr));
+ bpl++;
+ }
}
}
/*
* Finish initializing those IOCB fields that are dependent on the
- * scsi_cmnd request_buffer. Note that the bdeSize is explicitly
- * reinitialized since all iocb memory resources are used many times
- * for transmit, receive, and continuation bpl's.
+ * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is
+ * explicitly reinitialized and for SLI-3 the extended bde count is
+ * explicitly reinitialized since all iocb memory resources are reused.
*/
- iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
- iocb_cmd->un.fcpi64.bdl.bdeSize +=
- (num_bde * sizeof (struct ulp_bde64));
- iocb_cmd->ulpBdeCount = 1;
- iocb_cmd->ulpLe = 1;
+ if (phba->sli_rev == 3) {
+ if (num_bde > LPFC_EXT_DATA_BDE_COUNT) {
+ /*
+ * The extended IOCB format can only fit 3 BDE or a BPL.
+ * This I/O has more than 3 BDE so the 1st data bde will
+ * be a BPL that is filled in here.
+ */
+ physaddr = lpfc_cmd->dma_handle;
+ data_bde->tus.f.bdeFlags = BUFF_TYPE_BLP_64;
+ data_bde->tus.f.bdeSize = (num_bde *
+ sizeof(struct ulp_bde64));
+ physaddr += (sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ (2 * sizeof(struct ulp_bde64)));
+ data_bde->addrHigh = putPaddrHigh(physaddr);
+ data_bde->addrLow = putPaddrLow(physaddr);
+ /* ebde count includes the responce bde and data bpl */
+ iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
+ } else {
+ /* ebde count includes the responce bde and data bdes */
+ iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
+ }
+ } else {
+ iocb_cmd->un.fcpi64.bdl.bdeSize =
+ ((num_bde + 2) * sizeof(struct ulp_bde64));
+ }
fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
return 0;
}
@@ -692,6 +746,24 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
+/**
+ * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB.
+ * @data: A pointer to the immediate command data portion of the IOCB.
+ * @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
+ *
+ * The routine copies the entire FCP command from @fcp_cmnd to @data while
+ * byte swapping the data to big endian format for transmission on the wire.
+ **/
+static void
+lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
+{
+ int i, j;
+ for (i = 0, j = 0; i < sizeof(struct fcp_cmnd);
+ i += sizeof(uint32_t), j++) {
+ ((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]);
+ }
+}
+
static void
lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
struct lpfc_nodelist *pnode)
@@ -758,7 +830,8 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
fcp_cmnd->fcpCntl3 = 0;
phba->fc4ControlRequests++;
}
-
+ if (phba->sli_rev == 3)
+ lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd);
/*
* Finish initializing those IOCB fields that are independent
* of the scsi_cmnd request_buffer
@@ -798,11 +871,13 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
piocb = &piocbq->iocb;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
- int_to_scsilun(lun, &lpfc_cmd->fcp_cmnd->fcp_lun);
+ /* Clear out any old data in the FCP command area */
+ memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
+ int_to_scsilun(lun, &fcp_cmnd->fcp_lun);
fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
-
+ if (vport->phba->sli_rev == 3)
+ lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd);
piocb->ulpCommand = CMD_FCP_ICMND64_CR;
-
piocb->ulpContext = ndlp->nlp_rpi;
if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) {
piocb->ulpFCP2Rcvy = 1;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 3cf488496d8..77afa2ba6a2 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -406,11 +406,8 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
static IOCB_t *
lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
{
- struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
- &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
- &phba->slim2p->mbx.us.s2.port[pring->ringno];
+ struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
uint32_t max_cmd_idx = pring->numCiocb;
-
if ((pring->next_cmdidx == pring->cmdidx) &&
(++pring->next_cmdidx >= max_cmd_idx))
pring->next_cmdidx = 0;
@@ -625,9 +622,11 @@ lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
/*
* Tell the HBA that there is work to do in this ring.
*/
- wmb();
- writel(CA_R0ATT << (ringno * 4), phba->CAregaddr);
- readl(phba->CAregaddr); /* flush */
+ if (!(phba->sli3_options & LPFC_SLI3_CRP_ENABLED)) {
+ wmb();
+ writel(CA_R0ATT << (ringno * 4), phba->CAregaddr);
+ readl(phba->CAregaddr); /* flush */
+ }
}
/**
@@ -1654,9 +1653,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
static void
lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
{
- struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
- &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
- &phba->slim2p->mbx.us.s2.port[pring->ringno];
+ struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
/*
* Ring <ringno> handler: portRspPut <portRspPut> is bigger then
* rsp ring <portRspMax>
@@ -1704,7 +1701,7 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba)
IOCB_t *entry = NULL;
struct lpfc_iocbq *cmdiocbq = NULL;
struct lpfc_iocbq rspiocbq;
- struct lpfc_pgp *pgp;
+ struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
uint32_t status;
uint32_t portRspPut, portRspMax;
int type;
@@ -1714,11 +1711,6 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba)
pring->stats.iocb_event++;
- pgp = (phba->sli_rev == 3) ?
- &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
- &phba->slim2p->mbx.us.s2.port[pring->ringno];
-
-
/*
* The next available response entry should never exceed the maximum
* entries. If it does, treat it as an adapter hardware error.
@@ -1870,9 +1862,7 @@ static int
lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring, uint32_t mask)
{
- struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
- &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
- &phba->slim2p->mbx.us.s2.port[pring->ringno];
+ struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
IOCB_t *irsp = NULL;
IOCB_t *entry = NULL;
struct lpfc_iocbq *cmdiocbq = NULL;
@@ -2064,9 +2054,7 @@ int
lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring, uint32_t mask)
{
- struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
- &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
- &phba->slim2p->mbx.us.s2.port[pring->ringno];
+ struct lpfc_pgp *pgp;
IOCB_t *entry;
IOCB_t *irsp = NULL;
struct lpfc_iocbq *rspiocbp = NULL;
@@ -2080,6 +2068,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
int rc = 1;
unsigned long iflag;
+ pgp = &phba->port_gp[pring->ringno];
spin_lock_irqsave(&phba->hbalock, iflag);
pring->stats.iocb_event++;
@@ -2990,13 +2979,15 @@ lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode)
if (rc == -ERESTART) {
phba->link_state = LPFC_LINK_UNKNOWN;
continue;
- } else if (rc) {
+ } else if (rc)
break;
- }
-
phba->link_state = LPFC_INIT_MBX_CMDS;
lpfc_config_port(phba, pmb);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+ phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
+ LPFC_SLI3_HBQ_ENABLED |
+ LPFC_SLI3_CRP_ENABLED |
+ LPFC_SLI3_INB_ENABLED);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0442 Adapter failed to init, mbxCmd x%x "
@@ -3006,25 +2997,44 @@ lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode)
phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
spin_unlock_irq(&phba->hbalock);
rc = -ENXIO;
- } else {
+ } else
done = 1;
- phba->max_vpi = (phba->max_vpi &&
- pmb->mb.un.varCfgPort.gmv) != 0
- ? pmb->mb.un.varCfgPort.max_vpi
- : 0;
- }
}
-
if (!done) {
rc = -EINVAL;
goto do_prep_failed;
}
-
- if ((pmb->mb.un.varCfgPort.sli_mode == 3) &&
- (!pmb->mb.un.varCfgPort.cMA)) {
- rc = -ENXIO;
+ if (pmb->mb.un.varCfgPort.sli_mode == 3) {
+ if (!pmb->mb.un.varCfgPort.cMA) {
+ rc = -ENXIO;
+ goto do_prep_failed;
+ }
+ if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) {
+ phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
+ phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi;
+ } else
+ phba->max_vpi = 0;
+ if (pmb->mb.un.varCfgPort.gerbm)
+ phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
+ if (pmb->mb.un.varCfgPort.gcrp)
+ phba->sli3_options |= LPFC_SLI3_CRP_ENABLED;
+ if (pmb->mb.un.varCfgPort.ginb) {
+ phba->sli3_options |= LPFC_SLI3_INB_ENABLED;
+ phba->port_gp = phba->mbox->us.s3_inb_pgp.port;
+ phba->inb_ha_copy = &phba->mbox->us.s3_inb_pgp.ha_copy;
+ phba->inb_counter = &phba->mbox->us.s3_inb_pgp.counter;
+ phba->inb_last_counter =
+ phba->mbox->us.s3_inb_pgp.counter;
+ } else {
+ phba->port_gp = phba->mbox->us.s3_pgp.port;
+ phba->inb_ha_copy = NULL;
+ phba->inb_counter = NULL;
+ }
+ } else {
+ phba->port_gp = phba->mbox->us.s2.port;
+ phba->inb_ha_copy = NULL;
+ phba->inb_counter = NULL;
}
-
do_prep_failed:
mempool_free(pmb, phba->mbox_mem_pool);
return rc;
@@ -3085,9 +3095,6 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba)
if (phba->sli_rev == 3) {
phba->iocb_cmd_size = SLI3_IOCB_CMD_SIZE;
phba->iocb_rsp_size = SLI3_IOCB_RSP_SIZE;
- phba->sli3_options |= LPFC_SLI3_ENABLED;
- phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
-
} else {
phba->iocb_cmd_size = SLI2_IOCB_CMD_SIZE;
phba->iocb_rsp_size = SLI2_IOCB_RSP_SIZE;
@@ -3255,7 +3262,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
int i;
unsigned long timeout;
unsigned long drvr_flag = 0;
- volatile uint32_t word0, ldata;
+ uint32_t word0, ldata;
void __iomem *to_slim;
int processing_queue = 0;
@@ -3415,12 +3422,11 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* First copy command data to host SLIM area */
- lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE);
+ lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
} else {
if (mb->mbxCommand == MBX_CONFIG_PORT) {
/* copy command data into host mbox for cmpl */
- lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx,
- MAILBOX_CMD_SIZE);
+ lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
}
/* First copy mbox command data to HBA SLIM, skip past first
@@ -3430,7 +3436,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
MAILBOX_CMD_SIZE - sizeof (uint32_t));
/* Next copy over first word, with mbxOwner set */
- ldata = *((volatile uint32_t *)mb);
+ ldata = *((uint32_t *)mb);
to_slim = phba->MBslimaddr;
writel(ldata, to_slim);
readl(to_slim); /* flush */
@@ -3462,7 +3468,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* First read mbox status word */
- word0 = *((volatile uint32_t *)&phba->slim2p->mbx);
+ word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
} else {
/* First read mbox status word */
@@ -3501,12 +3507,11 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* First copy command data */
- word0 = *((volatile uint32_t *)
- &phba->slim2p->mbx);
+ word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
if (mb->mbxCommand == MBX_CONFIG_PORT) {
MAILBOX_t *slimmb;
- volatile uint32_t slimword0;
+ uint32_t slimword0;
/* Check real SLIM for any errors */
slimword0 = readl(phba->MBslimaddr);
slimmb = (MAILBOX_t *) & slimword0;
@@ -3527,8 +3532,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* copy results back to user */
- lpfc_sli_pcimem_bcopy(&phba->slim2p->mbx, mb,
- MAILBOX_CMD_SIZE);
+ lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
} else {
/* First copy command data */
lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
@@ -5095,7 +5099,16 @@ lpfc_intr_handler(int irq, void *dev_id)
* preserve status) and Link Attention
*/
spin_lock(&phba->hbalock);
- ha_copy = readl(phba->HAregaddr);
+ if (phba->sli3_options & LPFC_SLI3_INB_ENABLED &&
+ (phba->inb_last_counter != *phba->inb_counter)) {
+ phba->inb_last_counter = *phba->inb_counter;
+ ha_copy = le32_to_cpu(*phba->inb_ha_copy);
+ } else
+ ha_copy = readl(phba->HAregaddr);
+ if (unlikely(!ha_copy)) {
+ spin_unlock(&phba->hbalock);
+ return IRQ_NONE;
+ }
/* If somebody is waiting to handle an eratt don't process it
* here. The brdkill function will do this.
*/
@@ -5105,9 +5118,6 @@ lpfc_intr_handler(int irq, void *dev_id)
readl(phba->HAregaddr); /* flush */
spin_unlock(&phba->hbalock);
- if (unlikely(!ha_copy))
- return IRQ_NONE;
-
work_ha_copy = ha_copy & phba->work_ha_mask;
if (unlikely(work_ha_copy)) {
@@ -5194,7 +5204,7 @@ lpfc_intr_handler(int irq, void *dev_id)
(phba->sli.mbox_active)) {
pmb = phba->sli.mbox_active;
pmbox = &pmb->mb;
- mbox = &phba->slim2p->mbx;
+ mbox = phba->mbox;
vport = pmb->vport;
/* First check out the status word */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-24 19:01:32 +0000